summaryrefslogtreecommitdiffstats
path: root/perl-install/Makefile.config
Commit message (Expand)AuthorAgeFilesLines
* move Xtest() and setMouseLive() out of c/stuff to xf86misc::mainPascal Rigaux2004-02-081-2/+2
* livedrake is deprecated/removedPascal Rigaux2004-01-071-1/+1
* obsolete livedrake, live_install, live_updatePascal Rigaux2004-01-061-1/+1
* add drakupsThierry Vignaud2003-11-261-1/+1
* install drakclockThierry Vignaud2003-11-141-1/+1
* fixing keyboard focus during install:Pascal Rigaux2003-09-081-1/+1
* add drakauthPascal Rigaux2003-08-011-1/+1
* don't install share/advertising/*.pl files inPascal Rigaux2003-03-071-2/+2
* add drakedmThierry Vignaud2003-02-061-1/+2
* added drakpxeFrancois Pons2003-01-201-1/+1
* - add drakhelpDaouda Lo2003-01-161-1/+1
* service_harddrake.sh is not a PM, so i remove it from STANDALONEPMS_Pascal Rigaux2002-12-101-1/+1
* live_install is a shell script, do not pretend it's perl ;pPascal Rigaux2002-12-101-1/+1
* - add missing printer directoryThierry Vignaud2002-11-151-1/+1
* split harddrake part that configure a module into modules::interactiveThierry Vignaud2002-09-241-1/+1
* move back draksec's files in drakxtoolsThierry Vignaud2002-09-101-1/+1
* move back draksec to drakxtoolsThierry Vignaud2002-09-101-1/+1
* add drakperm!Thierry Vignaud2002-09-041-1/+1
* - s/tinyfirewall/drakfirewall/Daouda Lo2002-09-021-1/+1
* new prog drakupdate_fstabPascal Rigaux2002-08-281-1/+1
* add draksound to standalone tools listThierry Vignaud2002-08-211-1/+1
* adding draksplash in STANDALONEPMS_Jonathan Gotti2002-08-201-1/+1
* remove dir securityPascal Rigaux2002-08-191-2/+2
* - Move xf86Wacom.so modules to {i386,ppc}-specific filelistGwenolรฉ Beauchesne2002-08-051-0/+6
* drakconf is deadThierry Vignaud2002-08-011-1/+1
* add XconfigPascal Rigaux2002-07-241-1/+1
* add PMS_DIRS in Makefile.config and use it everywherePascal Rigaux2002-07-241-1/+2
* g Move 2: partition table: hierarchyThierry Vignaud2002-07-231-1/+1
* - Big Move 1: interactive::* hierarchyThierry Vignaud2002-07-231-1/+1
* replace drakconnet with drakconnect :-(Pascal Rigaux2002-07-111-1/+1
* replace draknet with drakconnetPascal Rigaux2002-07-111-1/+1
* add harddrake service wrapper to installed filesThierry Vignaud2002-07-091-1/+1
* - add drakbugDaouda Lo2002-07-081-1/+1
* add the harddrake service which was missingThierry Vignaud2002-07-061-1/+1
* standalone/drakbug doesn't exist! (why did deush add it???)Pascal Rigaux2002-07-061-1/+1
* it is standalone/harddrake2, not standalone/harddrake (poor deush must be loo...Pascal Rigaux2002-07-061-1/+1
* add harddrake pm'sPascal Rigaux2002-07-061-1/+1
* - add harddrake drakbug drakTermServ to STANDALONEPMS_Daouda Lo2002-07-051-1/+1
* add drakfloppy to STANDALONEPMS_Yves Duret2002-04-071-1/+1
* added drakproxydamien2002-03-111-1/+1
* make a difference between PMS and ALLPMS. For install, only use PMSPascal Rigaux2002-02-211-1/+1
* addde share/advertising/*.pl for translationdamien2002-02-191-1/+1
* add drakxtv (scantv gui)Thierry Vignaud2002-02-071-1/+1
* - adapt to new diskdrake modulesPascal Rigaux2002-01-271-3/+5
* added drakbackup drakfontdamien2001-12-041-1/+1
* fileshare should be ok, handle diskdrake --fileshare, fix smb importPascal Rigaux2001-11-301-1/+1
* added scannerdrakeYves Duret2001-10-101-1/+1
* add aewm-drakxPascal Rigaux2001-09-151-1/+1
* added wonderful lsnetdrakePascal Rigaux2001-09-121-1/+1
* add localedrake (not tested)Pascal Rigaux2001-08-291-1/+1
generated by cgit v1.2.1 (git 2.21.0) at 2024-12-27 03:16:14 +0000
578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 
# SOME DESCRIPTIVE TITLE
# Copyright (C) 1999 MandrakeSof
#
# Kan Yuenyong <kan@kaiwal.com>, 1999
# Wachara Chinsettawong <wachara@yahoo.com>, 2001
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2001-09-21 19:50+0200\n"
"PO-Revision-Date: 2001-04-05 14:03GMT+7\n"
"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
"Language-Team: Thai\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=tis-620\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.8\n"

#: ../../Xconfigurator.pm_.c:231
msgid "Configure all heads independently"
msgstr "Configure all heads independently"

#: ../../Xconfigurator.pm_.c:232
msgid "Use Xinerama extension"
msgstr "Use Xinerama extension"

#: ../../Xconfigurator.pm_.c:235
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"

#: ../../Xconfigurator.pm_.c:238
msgid "Multi-head configuration"
msgstr "Multi-head configuration"

#: ../../Xconfigurator.pm_.c:239
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
"คุณต้องการทำอะไร?"

#: ../../Xconfigurator.pm_.c:248
msgid "Graphic card"
msgstr "กราฟฟิคการ์ด"

#: ../../Xconfigurator.pm_.c:248
msgid "Select a graphic card"
msgstr "เลือกกราฟฟิคการ์ด"

#: ../../Xconfigurator.pm_.c:249
msgid "Choose a X server"
msgstr "เลือก X เซิร์ฟเวอร์"

#: ../../Xconfigurator.pm_.c:249
msgid "X server"
msgstr "X เซิร์ฟเวอร์"

#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:310
msgid "Which configuration of XFree do you want to have?"
msgstr "XFree ชนิดใหนที่คุณต้องการมี"

#: ../../Xconfigurator.pm_.c:321
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."

#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Your card can have 3D hardware acceleration support with XFree %s."

#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s with 3D hardware acceleration"

#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."

#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"

#: ../../Xconfigurator.pm_.c:344
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."

#: ../../Xconfigurator.pm_.c:364
msgid "Xpmac (installation display driver)"
msgstr ""

#: ../../Xconfigurator.pm_.c:368
msgid "XFree configuration"
msgstr "การคอนฟิก XFree"

#: ../../Xconfigurator.pm_.c:434
msgid "Select the memory size of your graphic card"
msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"

#: ../../Xconfigurator.pm_.c:492
msgid "Choose options for server"
msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"

#: ../../Xconfigurator.pm_.c:516
msgid "Choose a monitor"
msgstr "เลือกจอภาพ"

#: ../../Xconfigurator.pm_.c:516
msgid "Monitor"
msgstr "จอภาพ"

#: ../../Xconfigurator.pm_.c:519
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"

#: ../../Xconfigurator.pm_.c:526
msgid "Horizontal refresh rate"
msgstr "อัตราการรีเฟรชตามแนวนอน"

#: ../../Xconfigurator.pm_.c:527
msgid "Vertical refresh rate"
msgstr "อัตราการรีเฟรชตามแนวตั้ง"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor not configured"
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: ../../Xconfigurator.pm_.c:567
msgid "Graphic card not configured yet"
msgstr "ยังไม่ได้คอนฟิกกราฟฟิกการ์ด"

#: ../../Xconfigurator.pm_.c:570
msgid "Resolutions not chosen yet"
msgstr "ยังไม่ได้เลือกความขนาดจอภาพ"

#: ../../Xconfigurator.pm_.c:587
msgid "Do you want to test the configuration?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: ../../Xconfigurator.pm_.c:591
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"

#: ../../Xconfigurator.pm_.c:594
msgid "Test of the configuration"
msgstr "ทดสอบการคอนฟิก"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"ลองเปลี่ยนพารามิเตอร์บางตัว"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid "An error has occurred:"
msgstr "มีข้อผิดพลาดเกิดขึ้น:"

#: ../../Xconfigurator.pm_.c:668
#, c-format
msgid "Leaving in %d seconds"
msgstr "ออกภายใน %d วินาที"

#: ../../Xconfigurator.pm_.c:679
msgid "Is this the correct setting?"
msgstr "ถูกต้องหรือไม่?"

#: ../../Xconfigurator.pm_.c:688
msgid "An error has occurred, try to change some parameters"
msgstr "เกิดความผิดพลาดขึ้น โปรดแก้ไขพารามิเตอร์บางอย่าง"

#: ../../Xconfigurator.pm_.c:759
msgid "Resolution"
msgstr "ขนาดจอภาพ"

#: ../../Xconfigurator.pm_.c:810
msgid "Choose the resolution and the color depth"
msgstr "เลือกขนาดจอภาพและความละเอียดสี"

#: ../../Xconfigurator.pm_.c:812
#, c-format
msgid "Graphic card: %s"
msgstr "กราฟฟิคการ์ด: %s"

#: ../../Xconfigurator.pm_.c:813
#, c-format
msgid "XFree86 server: %s"
msgstr "เซิร์ฟเวอร์ XFree86: %s"

#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
msgid "Expert Mode"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: ../../Xconfigurator.pm_.c:830
msgid "Show all"
msgstr "แสดงข้อมูลทั้งหมด"

#: ../../Xconfigurator.pm_.c:875
msgid "Resolutions"
msgstr "ความละเอียด"

#: ../../Xconfigurator.pm_.c:1437
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"

#: ../../Xconfigurator.pm_.c:1438
#, c-format
msgid "Mouse type: %s\n"
msgstr "เลือกชนิดของเม้าส์: %s\n"

#: ../../Xconfigurator.pm_.c:1439
#, c-format
msgid "Mouse device: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: ../../Xconfigurator.pm_.c:1440
#, c-format
msgid "Monitor: %s\n"
msgstr "จอภาพ: %s\n"

#: ../../Xconfigurator.pm_.c:1441
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"

#: ../../Xconfigurator.pm_.c:1442
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"

#: ../../Xconfigurator.pm_.c:1443
#, c-format
msgid "Graphic card: %s\n"
msgstr "กราฟฟิคการ์ด: %s\n"

#: ../../Xconfigurator.pm_.c:1444
#, fuzzy, c-format
msgid "Graphic card identification: %s\n"
msgstr "กราฟฟิคการ์ด: %s\n"

#: ../../Xconfigurator.pm_.c:1445
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"

#: ../../Xconfigurator.pm_.c:1447
#, c-format
msgid "Color depth: %s\n"
msgstr "อความละเอียดสี: %s\n"

#: ../../Xconfigurator.pm_.c:1448
#, c-format
msgid "Resolution: %s\n"
msgstr "ความละเอียดของภาพ %s\n"

#: ../../Xconfigurator.pm_.c:1450
#, c-format
msgid "XFree86 server: %s\n"
msgstr "เซิร์ฟเวอร์ XFree86: %s\n"

#: ../../Xconfigurator.pm_.c:1451
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "ไดร์เวอร์ XFree86: %s\n"

#: ../../Xconfigurator.pm_.c:1469
msgid "Preparing X-Window configuration"
msgstr "เตรียมการคอนฟิกของ X-Window"

#: ../../Xconfigurator.pm_.c:1489
msgid "What do you want to do?"
msgstr "คุณต้องการจะทำอะไร?"

#: ../../Xconfigurator.pm_.c:1494
msgid "Change Monitor"
msgstr "เปลี่ยนจอภาพ"

#: ../../Xconfigurator.pm_.c:1495
msgid "Change Graphic card"
msgstr "เปลี่ยนกราฟฟิคการ์ด"

#: ../../Xconfigurator.pm_.c:1497
msgid "Change Server options"
msgstr "เปลี่ยนออปชั่นของเซิร์ฟเวอร์"

#: ../../Xconfigurator.pm_.c:1498
msgid "Change Resolution"
msgstr "เปลี่ยนขนาดจอภาพ"

#: ../../Xconfigurator.pm_.c:1499
msgid "Show information"
msgstr "แสดงข้อมูล"

#: ../../Xconfigurator.pm_.c:1500
msgid "Test again"
msgstr "ทดสอบอีกครั้ง"

#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
msgid "Quit"
msgstr "ออก"

#: ../../Xconfigurator.pm_.c:1509
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"เก็บการเปลี่ยนแปลง\n"
"การปรับแต่งปัจจุบัณคือ:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1532
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "กรุณาเข้าไปที่ %s อีกครั้งเพื่อเริ่มการเปลี่ยนแปลง"

#: ../../Xconfigurator.pm_.c:1552
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"

#: ../../Xconfigurator.pm_.c:1555
msgid "X at startup"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: ../../Xconfigurator.pm_.c:1556
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 สี (8 บิต)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "สามหมื่นสองพันสี (15 บิต)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "หกหมื่นห้าพันสี (16 บิต)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "สิบหกล้านสี (24 บิต)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "สี่พันล้านสี (32 บิต)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:112
#, fuzzy
msgid "16 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:113
#, fuzzy
msgid "32 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:114
#, fuzzy
msgid "64 MB or more"
msgstr "16 MB หรือมากกว่า"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "จอภาพวีจีเอแบบมาตรฐาน 640x480 ที่ 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA ขนาด 800x600 ที่ 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "คอมแพตติเบิลกับ 8514 ขนาด 1024x768 ที่ 87 Hz interlaced (ไม่มี 800x600)"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA ขนาด 1024x768 ที่ 87 Hz interlaced ขนาด 800x600 ที่ 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Extended Super VGA, 800x600 ที่ 60 Hz, 640x480 ที่ 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Non-Interlaced SVGA, 1024x768 ที่ 60 Hz, 800x600 ที่ 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "High Frequency SVGA ขนาด 1024x768 ที่ 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Multi-frequency ซึ่งสามารถกำหนดขนาด 1280x1024 ที่ 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Multi-frequency ซึ่งสามารถกำหนดขนาด 1280x1024 ที่ 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Multi-frequency ซึ่งสามารถกำหนดขนาด 1280x1024 ที่ 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "จอภาพที่สามารถกำหนด 1600x1200 ที่ 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "จอภาพที่สามารถกำหนด 1600x1200 ที่ 76 Hz"

#: ../../any.pm_.c:96 ../../any.pm_.c:121
msgid "First sector of boot partition"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
msgid "First sector of drive (MBR)"
msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"

#: ../../any.pm_.c:100
msgid "SILO Installation"
msgstr "การติดตั้ง SILO"

#: ../../any.pm_.c:101 ../../any.pm_.c:114
msgid "Where do you want to install the bootloader?"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: ../../any.pm_.c:113
msgid "LILO/grub Installation"
msgstr "การติดตั้ง LILO/grub"

#: ../../any.pm_.c:125 ../../any.pm_.c:139
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:127
msgid "LILO with text menu"
msgstr "LILO แบบ text menu"

#: ../../any.pm_.c:128 ../../any.pm_.c:139
msgid "LILO with graphical menu"
msgstr "LILO แบบ graphical menu"

#: ../../any.pm_.c:131
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:135
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Boot จาก DOS/Windows (loadlin)"

#: ../../any.pm_.c:137 ../../any.pm_.c:139
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:145 ../../any.pm_.c:177
msgid "Bootloader main options"
msgstr "อ๊อปชั่นหลักของ Bootloader"

#: ../../any.pm_.c:146 ../../any.pm_.c:178
msgid "Bootloader to use"
msgstr "Bootloader ที่จะใช้"

#: ../../any.pm_.c:148
msgid "Bootloader installation"
msgstr "การติดตั้ง Bootloader"

#: ../../any.pm_.c:150 ../../any.pm_.c:180
msgid "Boot device"
msgstr "อุปกรณ์บูต"

#: ../../any.pm_.c:151
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (doesn't work on old BIOSes)"

#: ../../any.pm_.c:152
msgid "Compact"
msgstr "แบบอัด (Compact)"

#: ../../any.pm_.c:152
msgid "compact"
msgstr "แบบอัด (compact)"

#: ../../any.pm_.c:153 ../../any.pm_.c:250
msgid "Video mode"
msgstr "โหมดของการแสดงผล"

#: ../../any.pm_.c:155
msgid "Delay before booting default image"
msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"

#: ../../any.pm_.c:157 ../../any.pm_.c:730
#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
#: ../../standalone/draknet_.c:603
msgid "Password"
msgstr "รหัสผ่าน"

#: ../../any.pm_.c:158 ../../any.pm_.c:731
#: ../../install_steps_interactive.pm_.c:939
msgid "Password (again)"
msgstr "รหัสผ่าน (ใส่อีกครั้ง)"

#: ../../any.pm_.c:159
msgid "Restrict command line options"
msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"

#: ../../any.pm_.c:159
msgid "restrict"
msgstr "จำเพาะ"

#: ../../any.pm_.c:161
msgid "Clean /tmp at each boot"
msgstr "ลบ /tmp ตอน boot ทุกครั้ง"

#: ../../any.pm_.c:162
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"

#: ../../any.pm_.c:164
msgid "Enable multi profiles"
msgstr "Enable multi profiles"

#: ../../any.pm_.c:168
msgid "Give the ram size in MB"
msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"

#: ../../any.pm_.c:170
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "Please try again"
msgstr "โปรดลองอีกครั้ง"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "The passwords do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: ../../any.pm_.c:179
msgid "Init Message"
msgstr "ข้อความ init"

#: ../../any.pm_.c:181
msgid "Open Firmware Delay"
msgstr "Open Firmware Delay"

#: ../../any.pm_.c:182
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"

#: ../../any.pm_.c:183
msgid "Enable CD Boot?"
msgstr "Enable CD Boot?"

#: ../../any.pm_.c:184
msgid "Enable OF Boot?"
msgstr "Enable OF Boot?"

#: ../../any.pm_.c:185
msgid "Default OS?"
msgstr "Default OS?"

#: ../../any.pm_.c:207
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#: ../../any.pm_.c:217
msgid "Add"
msgstr "เพิ่ม"

#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
#: ../../printerdrake.pm_.c:1948
msgid "Done"
msgstr "ทำเรียบร้อยแล้ว"

#: ../../any.pm_.c:217
#, fuzzy
msgid "Modify"
msgstr "แก้ไข RAID"

#: ../../any.pm_.c:225
msgid "Which type of entry do you want to add?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"

#: ../../any.pm_.c:226
msgid "Linux"
msgstr "ลีนุกซ์"

#: ../../any.pm_.c:226
msgid "Other OS (SunOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (MacOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"

#: ../../any.pm_.c:227
msgid "Other OS (windows...)"
msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"

#: ../../any.pm_.c:246
msgid "Image"
msgstr "Image"

#: ../../any.pm_.c:247 ../../any.pm_.c:258
msgid "Root"
msgstr "Root"

#: ../../any.pm_.c:248 ../../any.pm_.c:277
msgid "Append"
msgstr "Append"

#: ../../any.pm_.c:252
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:253
msgid "Read-write"
msgstr "Read-write"

#: ../../any.pm_.c:260
msgid "Table"
msgstr "Table"

#: ../../any.pm_.c:261
msgid "Unsafe"
msgstr "Unsafe"

#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
msgid "Label"
msgstr "Label"

#: ../../any.pm_.c:270 ../../any.pm_.c:281
msgid "Default"
msgstr "Default"

#: ../../any.pm_.c:278
msgid "Initrd-size"
msgstr "Initrd-size"

#: ../../any.pm_.c:280
msgid "NoVideo"
msgstr "NoVideo"

#: ../../any.pm_.c:288
msgid "Remove entry"
msgstr "ลบข้อมูล"

#: ../../any.pm_.c:291
msgid "Empty label not allowed"
msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"

#: ../../any.pm_.c:292
msgid "This label is already used"
msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"

#: ../../any.pm_.c:597
#, c-format
msgid "Found %s %s interfaces"
msgstr "ตรวจพบ %s อินเทอร์เฟส %s"

#: ../../any.pm_.c:598
msgid "Do you have another one?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#: ../../any.pm_.c:599
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "No"
msgstr "ไม่ต้อง"

#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "Yes"
msgstr "ใช่"

#: ../../any.pm_.c:602
msgid "See hardware info"
msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:637
#, c-format
msgid "Installing driver for %s card %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: ../../any.pm_.c:638
#, c-format
msgid "(module %s)"
msgstr "(โมดูล %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:649
#, c-format
msgid "Which %s driver should I try?"
msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"

#: ../../any.pm_.c:657
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
"ข้อมูลดังกล่าว   คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"

#: ../../any.pm_.c:662
msgid "Autoprobe"
msgstr "ตรวจหาอัตโนมัติ"

#: ../../any.pm_.c:662
msgid "Specify options"
msgstr "ระบุอ๊อปชั่น"

#: ../../any.pm_.c:666
#, c-format
msgid "You may now provide its options to module %s."
msgstr "คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว"

#: ../../any.pm_.c:672
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
"ตัวอย่างเช่น, ``io=0x300 irq=7''"

#: ../../any.pm_.c:675
msgid "Module options:"
msgstr "อ๊อปชั่นของโมดูล:"

#: ../../any.pm_.c:686
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"การโหลดโมดูล %s ล้มเหลว\n"
"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"

#: ../../any.pm_.c:704
#, c-format
msgid "(already added %s)"
msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"

#: ../../any.pm_.c:708
msgid "This password is too simple"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"

#: ../../any.pm_.c:709
msgid "Please give a user name"
msgstr "โปรดป้อนชื่อผู้ใช้"

#: ../../any.pm_.c:710
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"

#: ../../any.pm_.c:711
msgid "This user name is already added"
msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"

#: ../../any.pm_.c:715
msgid "Add user"
msgstr "เพิ่มผู้ใช้"

#: ../../any.pm_.c:716
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ให้ใส่ผู้ใช้\n"
"%s"

#: ../../any.pm_.c:717
msgid "Accept user"
msgstr "ยอมรับผู้ใช้"

#: ../../any.pm_.c:728
msgid "Real name"
msgstr "ชื่อเต็ม"

#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
#: ../../printerdrake.pm_.c:480
msgid "User name"
msgstr "ชื่อผู้ใช้"

#: ../../any.pm_.c:732
msgid "Shell"
msgstr "เชลล์ที่ใช้"

#: ../../any.pm_.c:734
msgid "Icon"
msgstr "Icon"

#: ../../any.pm_.c:756
msgid "Autologin"
msgstr "Autologin"

#: ../../any.pm_.c:757
#, fuzzy
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"

#: ../../any.pm_.c:761
msgid "Choose the default user:"
msgstr "เลือกผู้ใช้ default"

#: ../../any.pm_.c:762
msgid "Choose the window manager to run:"
msgstr "เลือก window manager:"

#: ../../any.pm_.c:771
msgid "Please, choose a language to use."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: ../../any.pm_.c:773
msgid "You can choose other languages that will be available after install"
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
msgid "All"
msgstr "ทั้งหมด"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:259
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"ยินดีต้อนรับสู่ %s โปรแกรมเลือกใช้ระบบปฏิบัติการ!\n"
"\n"
"เลือกระบบปฏิบัติการหรือ\n"
"รอ %d วินาทีเพื่อใช้การบูตจากตัวเลือกตั้งต้น\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:835
msgid "Welcome to GRUB the operating system chooser!"
msgstr "ยินดีต้อนรับสู่ GRUB the operating system chooser!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:838
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "ใช้ %c และ %c เพื่อเลือก."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:841
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "กรุณากด enter ระบบที่ต้องการ 'e' เพื่อเปลี่ยนแปลง "

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:844
msgid "commands before booting, or 'c' for a command-line."
msgstr "คำสั่งก่อน boot, หรือ 'c' ถ้าต้องการ command-line."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:847
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "OS ที่ถูกเลือกจะทำการ boot ใน %d วินาที"

#: ../../bootloader.pm_.c:851
msgid "not enough room in /boot"
msgstr "ไม่มีที่พอใน /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:951
msgid "Desktop"
msgstr "Desktop"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:953
msgid "Start Menu"
msgstr "Start Menu"

#: ../../bootloader.pm_.c:972
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: ../../bootlook.pm_.c:46
msgid "no help implemented yet.\n"
msgstr "no help implemented yet.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Boot Style Configuration"

#: ../../bootlook.pm_.c:79
msgid "/_File"
msgstr "/_ไฟล์"

#: ../../bootlook.pm_.c:80
msgid "/File/_Quit"
msgstr "/ไฟล์/_เลิก"

#: ../../bootlook.pm_.c:80
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "NewStyle Categorizing Monitor"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "จอภาพชนิดใหม่"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "จอภาพทั่วไป"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Gtk+ Monitor ทั่วไป"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "รัน Aurora ขณะ boot"

#: ../../bootlook.pm_.c:100
#, fuzzy
msgid "Lilo/grub mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: ../../bootlook.pm_.c:102
#, fuzzy, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
"\n"
"%s\n"
"\n"
"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"

#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
msgid "Configure"
msgstr "การปรับแต่ง"

#: ../../bootlook.pm_.c:108
msgid "Boot mode"
msgstr "Boot mode"

#: ../../bootlook.pm_.c:136
msgid "System mode"
msgstr "System mode"

#: ../../bootlook.pm_.c:138
msgid "Launch the X-Window system at start"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: ../../bootlook.pm_.c:143
msgid "No, I don't want autologin"
msgstr "ไม่ต้องการ autologin"

#: ../../bootlook.pm_.c:145
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"

#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
#: ../../standalone/draknet_.c:644
msgid "OK"
msgstr "OK"

#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
msgid "Cancel"
msgstr "ยกเลิก"

#: ../../bootlook.pm_.c:224
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "ไม่สามารถเปิด /etc/inittab มาอ่านได้: %s"

#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
msgid "Installation of LILO failed. The following error occured:"
msgstr "การติดตั้ง LILO ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#: ../../common.pm_.c:93
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:93
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:101
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:109
#, c-format
msgid "%d minutes"
msgstr "%d นาที"

#: ../../common.pm_.c:111
msgid "1 minute"
msgstr "1 นาที"

#: ../../common.pm_.c:113
#, c-format
msgid "%d seconds"
msgstr "%d วินาที"

#: ../../diskdrake.pm_.c:100
msgid "Please make a backup of your data first"
msgstr "กรุณาทำ backup ก่อน"

#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
msgid "Read carefully!"
msgstr "โปรดอ่านอย่างถี่ถ้วน!"

#: ../../diskdrake.pm_.c:103
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
"ด้านหน้าของ disk"

#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
#: ../../install_steps_interactive.pm_.c:37
#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
msgid "Error"
msgstr "ผิดพลาด"

#: ../../diskdrake.pm_.c:159
msgid "Wizard"
msgstr "Wizard"

#: ../../diskdrake.pm_.c:181
msgid "New"
msgstr "ใหม่"

#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
#, fuzzy
msgid "Remote"
msgstr "ชื่อคิวรีโมท"

#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
msgid "Mount point"
msgstr "กำหนดจุดเม้าท์"

#: ../../diskdrake.pm_.c:209
#, fuzzy
msgid "Options"
msgstr "/Options/ทดลอง"

#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
#: ../../diskdrake_interactive.pm_.c:488
msgid "Type"
msgstr "ประเภท"

#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
msgid "Unmount"
msgstr "เลิกเม้าท์์ระบบไฟล์"

#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
msgid "Mount"
msgstr "เม้าท์"

#: ../../diskdrake.pm_.c:228
msgid "Choose action"
msgstr "เลือกกิจกรรม"

#: ../../diskdrake.pm_.c:235
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
"(กดที่มันแล้วกด \"ปรับขนาด\")"

#: ../../diskdrake.pm_.c:238
msgid "Please click on a partition"
msgstr "โปรดเลือกพาร์ติชั่น"

#: ../../diskdrake.pm_.c:240
#, fuzzy
msgid "Please click on a media"
msgstr "โปรดเลือกพาร์ติชั่น"

#: ../../diskdrake.pm_.c:243
#, fuzzy
msgid ""
"Please click on a button above\n"
"\n"
"Or use \"New\""
msgstr "โปรดเลือกพาร์ติชั่น"

#: ../../diskdrake.pm_.c:244
msgid "Use \"New\""
msgstr ""

#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
msgid "Details"
msgstr "รายละเอียด"

#: ../../diskdrake.pm_.c:395
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:395
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:395
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:395
#, fuzzy
msgid "Journalised FS"
msgstr "การเม้าท์ล้มเหลว"

#: ../../diskdrake.pm_.c:395
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:395
msgid "Swap"
msgstr "สวอป"

#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
msgid "Empty"
msgstr "ว่าง"

#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
#: ../../services.pm_.c:161
msgid "Other"
msgstr "อื่นๆ"

#: ../../diskdrake.pm_.c:400
msgid "Filesystem types:"
msgstr "ประเภทของระบบไฟล์:"

#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
msgid "Create"
msgstr "สร้าง"

#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
#, c-format
msgid "Use ``%s'' instead"
msgstr "ใช้ ``%s'' แทน"

#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
msgid "Delete"
msgstr "ลบ"

#: ../../diskdrake.pm_.c:423
msgid "Use ``Unmount'' first"
msgstr "ใช้ ``Unmount'' ก่อน"

#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: ../../diskdrake.pm_.c:500
#, fuzzy
msgid "Mount options"
msgstr "อ๊อปชั่นของโมดูล:"

#: ../../diskdrake.pm_.c:507
msgid "Various"
msgstr ""

#: ../../diskdrake.pm_.c:525
msgid "Removable media"
msgstr ""

#: ../../diskdrake.pm_.c:532
#, fuzzy
msgid "Change type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
msgid "Which filesystem do you want?"
msgstr "คุณต้องการเลือก filesystem ใด"

#: ../../diskdrake.pm_.c:564
msgid "Scanning available nfs shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:569
#, c-format
msgid "Scanning available nfs shared resource of server %s"
msgstr ""

#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
msgid "If the list above doesn't contain the wanted entry, enter it here:"
msgstr ""

#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
msgid "Server"
msgstr "เซิร์ฟเวอร์"

#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
msgid "Shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:615
msgid "Scanning available samba shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
#, c-format
msgid "Scanning available samba shared resource of server %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose a partition"
msgstr "เลือกกิจกรรม"

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose another partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: ../../diskdrake_interactive.pm_.c:188
#, fuzzy
msgid "Exit"
msgstr "Ext2"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to expert mode"
msgstr "ปกติ > สำหรับผู้ชำนาญ"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to normal mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Undo"
msgstr "ยกเลิก"

#: ../../diskdrake_interactive.pm_.c:229
msgid "Continue anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without saving"
msgstr "ออกโดยไม่ต้องบันทึก"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without writing the partition table?"
msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:237
#, fuzzy
msgid "Do you want to save /etc/fstab modifications"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Auto allocate"
msgstr "กำหนดแบบอัตโนมัติ"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Clear all"
msgstr "ล้างทั้งหมด"

#: ../../diskdrake_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:171
msgid "More"
msgstr "More"

#: ../../diskdrake_interactive.pm_.c:250
#, fuzzy
msgid "Hard drive information"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: ../../diskdrake_interactive.pm_.c:267
msgid "Not enough space for auto-allocating"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"

#: ../../diskdrake_interactive.pm_.c:273
msgid "All primary partitions are used"
msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"

#: ../../diskdrake_interactive.pm_.c:274
msgid "I can't add any more partition"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"

#: ../../diskdrake_interactive.pm_.c:275
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
"พาร์ติชั่นแบบ extended ได้"

#: ../../diskdrake_interactive.pm_.c:285
#, fuzzy
msgid "Save partition table"
msgstr "บันทึกตารางพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:286
#, fuzzy
msgid "Restore partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:287
msgid "Rescue partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:289
#, fuzzy
msgid "Reload partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:293
msgid "Removable media automounting"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
msgid "Select file"
msgstr "เลือกไฟล์"

#: ../../diskdrake_interactive.pm_.c:308
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
"ต้องการทำต่อหรือไม่?"

#: ../../diskdrake_interactive.pm_.c:322
msgid "Warning"
msgstr "คำเตือน"

#: ../../diskdrake_interactive.pm_.c:323
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"

#: ../../diskdrake_interactive.pm_.c:334
msgid "Trying to rescue partition table"
msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"

#: ../../diskdrake_interactive.pm_.c:340
#, fuzzy
msgid "Detailed information"
msgstr "แสดงข้อมูล"

#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
msgid "Resize"
msgstr "เปลี่ยนขนาด"

#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
msgid "Move"
msgstr "ย้าย"

#: ../../diskdrake_interactive.pm_.c:356
msgid "Format"
msgstr "ฟอร์แมต"

#: ../../diskdrake_interactive.pm_.c:358
msgid "Active"
msgstr "แอ็คทีฟ"

#: ../../diskdrake_interactive.pm_.c:359
msgid "Add to RAID"
msgstr "เพิ่มให้ RAID"

#: ../../diskdrake_interactive.pm_.c:360
msgid "Add to LVM"
msgstr "เพิ่มให้ LVM"

#: ../../diskdrake_interactive.pm_.c:363
msgid "Remove from RAID"
msgstr "ลบออกจาก RAID"

#: ../../diskdrake_interactive.pm_.c:364
msgid "Remove from LVM"
msgstr "ลบออกจาก LVM"

#: ../../diskdrake_interactive.pm_.c:365
msgid "Modify RAID"
msgstr "แก้ไข RAID"

#: ../../diskdrake_interactive.pm_.c:366
msgid "Use for loopback"
msgstr "ใช้สำหรับ loopback"

#: ../../diskdrake_interactive.pm_.c:409
msgid "Create a new partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: ../../diskdrake_interactive.pm_.c:412
msgid "Start sector: "
msgstr "เริ่มเซ็กเตอร์: "

#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
msgid "Size in MB: "
msgstr "ขนาดเป็น MB: "

#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
msgid "Filesystem type: "
msgstr "ประเภทของระบบไฟล์: "

#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
#: ../../diskdrake_interactive.pm_.c:1010
msgid "Mount point: "
msgstr "จุดเม้าท์: "

#: ../../diskdrake_interactive.pm_.c:420
msgid "Preference: "
msgstr "ข้อกำหนด: "

#: ../../diskdrake_interactive.pm_.c:462
#, fuzzy
msgid "Remove the loopback file?"
msgstr "ฟอร์แมต loopback file %s"

#: ../../diskdrake_interactive.pm_.c:486
msgid "Change partition type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:491
msgid "Switching from ext2 to ext3"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:521
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"

#: ../../diskdrake_interactive.pm_.c:528
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"

#: ../../diskdrake_interactive.pm_.c:549
msgid "Computing FAT filesystem bounds"
msgstr "คำนวณขอบเขตของระบบไฟล์"

#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
#: ../../install_interactive.pm_.c:116
msgid "Resizing"
msgstr "ปรับขนาด"

#: ../../diskdrake_interactive.pm_.c:578
msgid "This partition is not resizeable"
msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"

#: ../../diskdrake_interactive.pm_.c:583
msgid "All data on this partition should be backed-up"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"

#: ../../diskdrake_interactive.pm_.c:585
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"

#: ../../diskdrake_interactive.pm_.c:590
msgid "Choose the new size"
msgstr "เลือกขนาดใหม่"

#: ../../diskdrake_interactive.pm_.c:591
#, fuzzy
msgid "New size in MB: "
msgstr "ขนาดเป็น MB: "

#: ../../diskdrake_interactive.pm_.c:631
msgid "Which disk do you want to move it to?"
msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"

#: ../../diskdrake_interactive.pm_.c:632
msgid "Sector"
msgstr "เซ็กเตอร์"

#: ../../diskdrake_interactive.pm_.c:633
msgid "Which sector do you want to move it to?"
msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving"
msgstr "ย้าย"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving partition..."
msgstr "ย้ายพาร์ติชั่น..."

#: ../../diskdrake_interactive.pm_.c:657
msgid "Choose an existing RAID to add to"
msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"

#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
msgid "new"
msgstr "ใหม่"

#: ../../diskdrake_interactive.pm_.c:674
msgid "Choose an existing LVM to add to"
msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"

#: ../../diskdrake_interactive.pm_.c:679
msgid "LVM name?"
msgstr "ชื่อ LVM"

#: ../../diskdrake_interactive.pm_.c:718
msgid "This partition can't be used for loopback"
msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"

#: ../../diskdrake_interactive.pm_.c:730
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake_interactive.pm_.c:731
msgid "Loopback file name: "
msgstr "ชื่อ Loopback file: "

#: ../../diskdrake_interactive.pm_.c:736
#, fuzzy
msgid "Give a file name"
msgstr "ชื่อเต็ม"

#: ../../diskdrake_interactive.pm_.c:739
msgid "File already used by another loopback, choose another one"
msgstr "File already used by another loopback, choose another one"

#: ../../diskdrake_interactive.pm_.c:740
msgid "File already exists. Use it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"

#: ../../diskdrake_interactive.pm_.c:784
msgid "device"
msgstr "อุปกรณ์"

#: ../../diskdrake_interactive.pm_.c:785
msgid "level"
msgstr "ระดับ"

#: ../../diskdrake_interactive.pm_.c:786
msgid "chunk size"
msgstr "ขนาดของ chunk"

#: ../../diskdrake_interactive.pm_.c:801
msgid "Be careful: this operation is dangerous."
msgstr "ระวัง การทำงานนี้อันตราย"

#: ../../diskdrake_interactive.pm_.c:816
msgid "What type of partitioning?"
msgstr "การทำ partitioning ชนิดใด?"

#: ../../diskdrake_interactive.pm_.c:834
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"ขออภัย โปรแกรมไม่สามารถสร้าง /boot บนไดรฟ์ (ที่มีขนาดไซลินเดอร์มากกว่า 1024)\n"
"หรือคุณใช้ LILO และโปรแกรมไม่ทำงาน หรือคุณไม่ได้ใช้ LILO และคุณไม่ต้องการ /boot"

#: ../../diskdrake_interactive.pm_.c:838
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"พาร์ติชั่นที่คุณเลือกให้เป็น root (/) มีการกำหนดทางกายภาพให้มีขนาดเกิน\n"
"ไซลินเดอร์ที่ 1024 ของฮาร์ดดิสก์ และคุณไม่มีพาร์ติชั่น /boot\n"
"ถ้าคุณต้องการใช้ LILO เป็นบูตแมเนเจอร์ โปรดระมัดระวังในการเพิ่มพาร์ติชั่น /boot"

#: ../../diskdrake_interactive.pm_.c:844
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"

#: ../../diskdrake_interactive.pm_.c:864
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"

#: ../../diskdrake_interactive.pm_.c:868
msgid "You'll need to reboot before the modification can take place"
msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"

#: ../../diskdrake_interactive.pm_.c:879
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: ../../diskdrake_interactive.pm_.c:881
msgid "Formatting"
msgstr "ฟอร์แมต"

#: ../../diskdrake_interactive.pm_.c:882
#, c-format
msgid "Formatting loopback file %s"
msgstr "ฟอร์แมต loopback file %s"

#: ../../diskdrake_interactive.pm_.c:883
#: ../../install_steps_interactive.pm_.c:419
#, c-format
msgid "Formatting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Hide files"
msgstr "mkraid failed"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Move files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: ../../diskdrake_interactive.pm_.c:895
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:906
#, fuzzy
msgid "Moving files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: ../../diskdrake_interactive.pm_.c:910
#, c-format
msgid "Copying %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:914
#, fuzzy, c-format
msgid "Removing %s"
msgstr "ความละเอียดของภาพ %s\n"

#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
msgid "Device: "
msgstr "อุปกรณ์: "

#: ../../diskdrake_interactive.pm_.c:938
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"

#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
#: ../../diskdrake_interactive.pm_.c:1014
msgid "Type: "
msgstr "ประเภท: "

#: ../../diskdrake_interactive.pm_.c:946
msgid "Name: "
msgstr "ชื่อ: "

#: ../../diskdrake_interactive.pm_.c:954
#, c-format
msgid "Start: sector %s\n"
msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"

#: ../../diskdrake_interactive.pm_.c:955
#, c-format
msgid "Size: %s"
msgstr "ขนาด: %s"

#: ../../diskdrake_interactive.pm_.c:957
#, c-format
msgid ", %s sectors"
msgstr ", %s เซ็กเตอร์"

#: ../../diskdrake_interactive.pm_.c:959
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"

#: ../../diskdrake_interactive.pm_.c:960
msgid "Formatted\n"
msgstr "ฟอร์แมต\n"

#: ../../diskdrake_interactive.pm_.c:961
msgid "Not formatted\n"
msgstr "ยังไม่ได้ฟอร์แมต\n"

#: ../../diskdrake_interactive.pm_.c:962
msgid "Mounted\n"
msgstr "เม้าท์\n"

#: ../../diskdrake_interactive.pm_.c:963
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake_interactive.pm_.c:965
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Loopback file(s): %s\n"

#: ../../diskdrake_interactive.pm_.c:966
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
"    (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"

#: ../../diskdrake_interactive.pm_.c:968
#, c-format
msgid "Level %s\n"
msgstr "ระดับ %s\n"

#: ../../diskdrake_interactive.pm_.c:969
#, c-format
msgid "Chunk size %s\n"
msgstr "ขนาดของ Chunk %s\n"

#: ../../diskdrake_interactive.pm_.c:970
#, c-format
msgid "RAID-disks %s\n"
msgstr "ดิสก์แบบ RAID %s\n"

#: ../../diskdrake_interactive.pm_.c:972
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback file name: %s"

#: ../../diskdrake_interactive.pm_.c:975
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
"ปล่อยมันทิ้งไว้แบบนี้\n"

#: ../../diskdrake_interactive.pm_.c:978
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"

#: ../../diskdrake_interactive.pm_.c:997
#, c-format
msgid "Size: %s\n"
msgstr "ขนาด: %s\n"

#: ../../diskdrake_interactive.pm_.c:998
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"

#: ../../diskdrake_interactive.pm_.c:999
msgid "Info: "
msgstr "ข้อมูล: "

#: ../../diskdrake_interactive.pm_.c:1000
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disks %s\n"

#: ../../diskdrake_interactive.pm_.c:1001
#, c-format
msgid "Partition table type: %s\n"
msgstr "ชนิดตารางพาร์ติชั่น: %s\n"

#: ../../diskdrake_interactive.pm_.c:1002
#, c-format
msgid "on bus %d id %d\n"
msgstr "บนบัส %d id %d\n"

#: ../../diskdrake_interactive.pm_.c:1016
#, fuzzy, c-format
msgid "Options: %s"
msgstr "พาร์ติชั่น %s"

#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
#, c-format
msgid "%s formatting of %s failed"
msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"

#: ../../fs.pm_.c:506
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"

#: ../../fs.pm_.c:568
msgid "mount failed"
msgstr "การเม้าท์ล้มเหลว"

#: ../../fs.pm_.c:588
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr ""

#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
msgid "mount failed: "
msgstr "การเม้าท์ล้มเหลว: "

#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
#, c-format
msgid "error unmounting %s: %s"
msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "ง่าย"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "เซิร์ฟเวอร์"

#: ../../fsedit.pm_.c:461
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"

#: ../../fsedit.pm_.c:462
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"

#: ../../fsedit.pm_.c:471
msgid "Mount points must begin with a leading /"
msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"

#: ../../fsedit.pm_.c:472
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"

#: ../../fsedit.pm_.c:476
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"

#: ../../fsedit.pm_.c:478
msgid "This directory should remain within the root filesystem"
msgstr "This directory should remain within the root filesystem"

#: ../../fsedit.pm_.c:480
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"

#: ../../fsedit.pm_.c:596
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"

#: ../../fsedit.pm_.c:681
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"

#: ../../fsedit.pm_.c:704
msgid "You don't have any partitions!"
msgstr "คุณยังไม่ได้แบ่งพาร์ติชั่น!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""

#: ../../help.pm_.c:41
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
"knows if a selected package is located on another CDROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CDROM, you will first be\n"
"asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, "
"select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose "
"the\n"
"desired group(s).\n"
"\n"
" * \"Server\": finally, if the machine is intended to be a server, you will\n"
"be able to select which of the most common services you wish to see\n"
"installed on the machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Update\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""

#: ../../help.pm_.c:115
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""

#: ../../help.pm_.c:151
msgid ""
"If you wish to connect your computer to the Internet or to a local network,\n"
"please choose the correct option. Please turn on your device before\n"
"choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"Mandrake Linux proposes the configuration of an Internet connection at\n"
"installation time. Available connections are: traditional modem, ISDN\n"
"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
"(Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about Internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:172
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need."
msgstr ""

#: ../../help.pm_.c:188
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
"local time according to the time zone you selected."
msgstr ""
"ลีีนุกซ์จะจัดการระบบเวลาเป็น GMT หรือ \"Greenwich Mean Time\" และแปลงค่า\n"
"เวลาให้เป็นเวลาท้องถิ่น ซึ่งจะขึ้นอยู่กับย่านเวลาที่คุณได้เลือกเอาไว้"

#: ../../help.pm_.c:192
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
"the next step. If you cannot see the message, it simply means that the\n"
"configuration was wrong and the test will automatically end after 10\n"
"seconds, restoring the screen."
msgstr ""

#: ../../help.pm_.c:212
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""

#: ../../help.pm_.c:224
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:231
msgid ""
"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
"the prompt. But in case your computer cannot boot from the CDROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector "
"(MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard "
"disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""

#: ../../help.pm_.c:255
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this "
"procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""

#: ../../help.pm_.c:319
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:350
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""

#: ../../help.pm_.c:376
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""

#: ../../help.pm_.c:384
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""

#: ../../help.pm_.c:391
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:401
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Reload\": you can use this option if you wish to undo all changes and\n"
"load your initial partitions table.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition "
"your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Restore from floppy\": this option will allow you to restore a\n"
"previously saved partition table from floppy disk.\n"
"\n"
" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
"later partition-table recovery if necessary. It is strongly recommended to\n"
"perform this step.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: ../../help.pm_.c:460
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: ../../help.pm_.c:491
msgid "Please be patient. This operation can take several minutes."
msgstr "กรุณาอดทนรอสักครู่ การทำงานอาจใช้เวลาหลายนาที"

#: ../../help.pm_.c:494
#, fuzzy
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
"existing system.\n"
"\n"
"Please choose \"Install\" if there are no previous version of Mandrake\n"
"Linux installed or if you wish to boot between various operating systems.\n"
"\n"
"Please choose \"Update\" if you wish to update or repair an already\n"
"installed version of Mandrake Linux.\n"
"\n"
"Depending on your knowledge of GNU/Linux, please choose one of the\n"
"following to install or update your Mandrake Linux operating system:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""
"กรุณาเลือก \"ติดตั้ง\" ถ้ายังไม่เคยมีการติดตั้ง Mandrake Linux มาก่อน\n"
"หรือต้องการติดตั้ง OS หลายตัว\n"
"\n"
"\n"
"กรุณาเลือก \"Update\" ถ้าคุณต้องการ Update Mandrake Linux ที่ติดตั้งอยู่แล้ว\n"
"\n"
"\n"
"แล้วแต่ความรู้ใน Linux ของคุณ กรุณาวิธีการที่เหมาะสมที่สุด\n"
"\n"
"* Recommanded: ถ้าคุณไม่เคยลง Linux มาก่อน\n"
"\n"
"* Customized: ถ้าคุณรู้จัก Linux ดี คุณสามารถเลือกการลงแบบ\n"
" (workstation, server, หรือ development)\n"
"\n"
"\n"
"* Expert: ถ้าคุณมีความรู้ Linux เป็นอย่างดี เช่นเดียวกับการลงแบบ \n"
" customized คุณสามารถเลือกลงแบบ workstation, server, หรือ \n"
" development) คุณควรระวังอย่างมากในการเลือกลงลักษณะนี้\n"
" ถ้าคุณไม่แน่ใจกรุณาเลือกลงวิธีอื่น"

#: ../../help.pm_.c:521
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""

#: ../../help.pm_.c:534
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""

#: ../../help.pm_.c:547
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"RETURN to \"Cancel\" and choose again."
msgstr ""

#: ../../help.pm_.c:560
msgid ""
"Please select the correct port. For example, the COM1 port under MS Windows\n"
"is named ttyS0 under GNU/Linux."
msgstr ""

#: ../../help.pm_.c:564
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:600
msgid ""
"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
"boot\n"
"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"GRUB\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu "
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"Mandrake Linux installs its own boot loader, which will let you boot either\n"
"GNU/Linux or any other operating systems which you have on your system.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Double-clicking on an existing entry allows you to change\n"
"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
"on to the next installation step."
msgstr ""

#: ../../help.pm_.c:647
msgid ""
"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""

#: ../../help.pm_.c:658
#, fuzzy
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"คุณจะต้องบอกให้ทราบว่าคุณต้องการใส่ข้อมูล\n"
"ที่เกี่ยวข้องกับการบูตลีนุกซ์ไว้ที่ใด\n"
"\n"
"\n"
"ถ้าคุณไม่ทราบว่าคุณจะต้องทำอย่างไร โปรดเลือก \"เซ็กเตอร์แรกของไดรว์ (MBR)\"."

#: ../../help.pm_.c:665
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
"a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""

#: ../../help.pm_.c:693
#, fuzzy
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting information on your\n"
"hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""
"DrakX จะพยายามหา PCI SCSI adapter(s)  ถ้า DrakX\n"
"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
"ถูกติดตั้งโดยออโตเมติก\n"
"\n"
"\n"
"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
"ไม่สามารถหาเจอ  คุณจะโดนถามว่ามี  SCSI adapter ในเครื่องของคุณ\n"
"หรือไม่  ถ้าไม่มีกรุณากดที่ \"ไม่\"  แต่ถ้าคุณกดลงที่  \"ไช่\" คุณจะต้องเลือก\n"
"ชนิดของ adapter ที่คุณมีอยู่\n"
"\n"
"\n"
"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
"Option หรือไม่  ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
"\n"
"\n"
"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง  คุณควรหาข้อมูลเพิ่ม\n"
"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"

#: ../../help.pm_.c:720
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot "
"prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr ""

#: ../../help.pm_.c:765
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required "
"to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: ../../help.pm_.c:798
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
"button to change it if necessary.\n"
"\n"
" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
"click on the button to change that if necessary.\n"
"\n"
" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
"the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:827
#, fuzzy
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"เลือก harddisk ที่ต้องการลบและลง Mandrake Linux\n"
"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
"และจะไม่สามารถกู้คืนได้"

#: ../../help.pm_.c:832
#, fuzzy
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
"\n"
"\n"
"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"

#: ../../install2.pm_.c:114
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is missing)"
msgstr ""

#: ../../install_any.pm_.c:421
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: ../../install_any.pm_.c:457
msgid "Can't use broadcast with no NIS domain"
msgstr ""

#: ../../install_any.pm_.c:793
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"

#: ../../install_any.pm_.c:797
msgid "This floppy is not FAT formatted"
msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"

#: ../../install_any.pm_.c:809
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"

#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
#, c-format
msgid "Error reading file %s"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"

#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
msgid "Ok"
msgstr "ตกลง"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"hardware บางชนิดต้องการ driver พิเศษ\n"
"คุณสามารถหาข้อมูลได้จาก: %s"

#: ../../install_interactive.pm_.c:44
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"คุณต้องมี root พาร์ติชั่น\n"
"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"

#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
"\n"
"ต้องการจะทำต่อหรือไม่?"

#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
#, fuzzy
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: ../../install_interactive.pm_.c:76
msgid "Use free space"
msgstr "ใช้พื้นที่ที่ว่าง"

#: ../../install_interactive.pm_.c:78
msgid "Not enough free space to allocate new partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: ../../install_interactive.pm_.c:86
msgid "Use existing partition"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"

#: ../../install_interactive.pm_.c:88
msgid "There is no existing partition to use"
msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"

#: ../../install_interactive.pm_.c:95
msgid "Use the Windows partition for loopback"
msgstr "ใช้ windows partion สำหรับการ Loopback"

#: ../../install_interactive.pm_.c:98
msgid "Which partition do you want to use for Linux4Win?"
msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"

#: ../../install_interactive.pm_.c:100
msgid "Choose the sizes"
msgstr "เลือกขนาด"

#: ../../install_interactive.pm_.c:101
msgid "Root partition size in MB: "
msgstr "ขนาดของพาร์ติชั่นรูท MB:"

#: ../../install_interactive.pm_.c:102
msgid "Swap partition size in MB: "
msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "

#: ../../install_interactive.pm_.c:111
msgid "Use the free space on the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to resize?"
msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"

#: ../../install_interactive.pm_.c:116
msgid "Computing Windows filesystem bounds"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"

#: ../../install_interactive.pm_.c:119
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
"มีข้อผิดพลาดนี้เกิดขึ้น: %s"

#: ../../install_interactive.pm_.c:122
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"

#: ../../install_interactive.pm_.c:123
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ระวัง!\n"
"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่  และคุณสมควรที่จะทำการ\n"
"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
"เมื่อคุณแน่ใจแล้ว กด OK"

#: ../../install_interactive.pm_.c:132
msgid "Which size do you want to keep for windows on"
msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"

#: ../../install_interactive.pm_.c:133
#, c-format
msgid "partition %s"
msgstr "พาร์ติชั่น %s"

#: ../../install_interactive.pm_.c:139
#, c-format
msgid "FAT resizing failed: %s"
msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"

#: ../../install_interactive.pm_.c:154
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"

#: ../../install_interactive.pm_.c:160
msgid "Erase entire disk"
msgstr "ลบ disk ทั้งหมด"

#: ../../install_interactive.pm_.c:160
msgid "Remove Windows(TM)"
msgstr "ลบ Windows(TM)"

#: ../../install_interactive.pm_.c:163
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "คุณมี harddisk มากกว่า  1 ตัว  คุณต้องการลง linux บน harddisk ตัวใหน"

#: ../../install_interactive.pm_.c:166
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"

#: ../../install_interactive.pm_.c:174
msgid "Custom disk partitioning"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: ../../install_interactive.pm_.c:178
msgid "Use fdisk"
msgstr "ใช้ fdisk"

#: ../../install_interactive.pm_.c:181
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"

#: ../../install_interactive.pm_.c:210
msgid "You don't have enough free space on your Windows partition"
msgstr "คุณไม่มีพื้นที่เพียงพอในพาร์ติชั่น Windows!"

#: ../../install_interactive.pm_.c:226
msgid "I can't find any room for installing"
msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"

#: ../../install_interactive.pm_.c:230
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"

#: ../../install_interactive.pm_.c:235
#, c-format
msgid "Partitioning failed: %s"
msgstr "การทำพาร์ติชั่นล้มเหลว: %s"

#: ../../install_interactive.pm_.c:241
msgid "Bringing up the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"

#: ../../install_interactive.pm_.c:246
msgid "Bringing down the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: ../../install_steps.pm_.c:73
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
"หากทำงานต่ออาจเกิดความเสียหายได้"

#: ../../install_steps.pm_.c:207
#, c-format
msgid "Duplicate mount point %s"
msgstr "ทำซ้ำจุดเม้าท์ %s"

#: ../../install_steps.pm_.c:384
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: ../../install_steps.pm_.c:459
#, c-format
msgid "Welcome to %s"
msgstr "ยินดีต้อนรับสู่ %s"

#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
msgid "No floppy drive available"
msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"

#: ../../install_steps_auto_install.pm_.c:77
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "เข้าสู่ขั้นตอน `%s'\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "เลือกขนาดที่คุณต้องการติดตั้ง"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "ขนาดรวม: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
#, c-format
msgid "Version: %s\n"
msgstr "เวอร์ชั่น: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
#, c-format
msgid "Size: %d KB\n"
msgstr "ขนาด: %d KB\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
#: ../../install_steps_interactive.pm_.c:509
msgid "Choose the packages you want to install"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"

#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
msgid "Info"
msgstr "ข้อมูล"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
#: ../../install_steps_interactive.pm_.c:212
msgid "Install"
msgstr "ติดตั้ง"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
#: ../../install_steps_interactive.pm_.c:695
msgid "Installing"
msgstr "กำลังติดตั้ง"

#: ../../install_steps_graphical.pm_.c:499
msgid "Please wait, "
msgstr "โปรดรอสักครู่"

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
msgid "Time remaining "
msgstr "เวลาที่เหลือ "

#: ../../install_steps_graphical.pm_.c:502
msgid "Total time "
msgstr "เวลาทั้งหมด "

#: ../../install_steps_graphical.pm_.c:507
#: ../../install_steps_interactive.pm_.c:695
msgid "Preparing installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
#, c-format
msgid "Installing package %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
#: ../../install_steps_gtk.pm_.c:646
msgid "Go on anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
msgid "There was an error ordering packages:"
msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"

#: ../../install_steps_graphical.pm_.c:577
msgid "Use existing configuration for X11?"
msgstr "ใช้คอนฟิกที่มีอยู่แล้วของระบบ X11 หรือไม่?"

#: ../../install_steps_gtk.pm_.c:148
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
"Mandrake Linux  ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"

#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
msgid "Install Class"
msgstr "ประเภทของการติดตั้ง"

#: ../../install_steps_gtk.pm_.c:162
msgid "Please, choose one of the following classes of installation:"
msgstr "กรุณาเลือก 1 ในวิธีการติดตั้งดังต่อไปนี้"

#: ../../install_steps_gtk.pm_.c:228
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "ขนาดรวมของหมวดที่คุณเลือกเพื่อติดตั้งมีขนาดประมาณ %d MB \n"

#: ../../install_steps_gtk.pm_.c:230
#, c-format
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"ถ้าคุณต้องการติดตั้งน้อยกว่าขนาดนี้\n"
"กรุณาเลือกเปอร์เซ็นการติดตั้งที่ต้องการ\n"
"\n"
"เปอร์เซ็นที่ต่ำนั้นหมายถึงแพกเกจที่สำคัญที่สุดเท่านั้น\n"
"ที่จะถูกติดตั้ง\n"
"100%% หมายถึงทุกอย่างจะถูกติดตั้ง"

#: ../../install_steps_gtk.pm_.c:235
#, c-format
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"คุณมีพื้นที่แค่ %d%% ของแพกเกจ\n"
"\n"
"ถ้าคุณต้องการติดตั้งน้อยกว่านี้\n"
"เลือกเปอร์เซ็นการติดตั้งที่คุณต้องการ\n"
"เปอร์เซ็นที่ต่ำนั้นหมายถึงแพกเกจที่สำคัญที่สุดเท่านั้น\n"
"ที่จะถูกติดตั้ง\n"
"เปอร์เซ็น %d%% จะทำการติดตั้งแพกเกจมากที่สุดเท่าที่จะทำได้"

#: ../../install_steps_gtk.pm_.c:241
msgid "You will be able to choose them more specifically in the next step."
msgstr "คุณจะต้องเลือกให้ถูกต้องมากขึ้นในขั้นตอนถัดไป "

#: ../../install_steps_gtk.pm_.c:243
msgid "Percentage of packages to install"
msgstr "เปอร์เซ็นการติดตั้งแพ็คเก็จ"

#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
msgid "Package Group Selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
msgid "Individual package selection"
msgstr "Individual package selection"

#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
#, c-format
msgid "Total size: %d / %d MB"
msgstr "ขนาดรวม: %d / %d MB "

#: ../../install_steps_gtk.pm_.c:385
msgid "Bad package"
msgstr "แพ็คเก็จชำรุด"

#: ../../install_steps_gtk.pm_.c:386
#, c-format
msgid "Name: %s\n"
msgstr "ชื่อ: %s\n"

#: ../../install_steps_gtk.pm_.c:389
#, c-format
msgid "Importance: %s\n"
msgstr "ความสำคัญ: %s\n"

#: ../../install_steps_gtk.pm_.c:411
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"

#: ../../install_steps_gtk.pm_.c:416
msgid "The following packages are going to be installed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: ../../install_steps_gtk.pm_.c:417
msgid "The following packages are going to be removed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"

#: ../../install_steps_gtk.pm_.c:429
msgid "You can't select/unselect this package"
msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"

#: ../../install_steps_gtk.pm_.c:441
msgid "This is a mandatory package, it can't be unselected"
msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"

#: ../../install_steps_gtk.pm_.c:443
msgid "You can't unselect this package. It is already installed"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"

#: ../../install_steps_gtk.pm_.c:447
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: ../../install_steps_gtk.pm_.c:451
msgid "You can't unselect this package. It must be upgraded"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้  มันจำเป็นที่จะต้องถูก upgrade"

#: ../../install_steps_gtk.pm_.c:456
msgid "Show automatically selected packages"
msgstr ""

#: ../../install_steps_gtk.pm_.c:460
#, fuzzy
msgid "Load/Save on floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: ../../install_steps_gtk.pm_.c:461
#, fuzzy
msgid "Updating package selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: ../../install_steps_gtk.pm_.c:466
#, fuzzy
msgid "Minimal install"
msgstr "ออกจากการติดตั้ง"

#: ../../install_steps_gtk.pm_.c:503
msgid "Estimating"
msgstr "การประเมิน"

#: ../../install_steps_gtk.pm_.c:522
msgid "Please wait, preparing installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: ../../install_steps_gtk.pm_.c:553
#, c-format
msgid "%d packages"
msgstr "แพ็คเก็จ %d ชุด"

#: ../../install_steps_gtk.pm_.c:599
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Accept"
msgstr "ยอมรับ"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Refuse"
msgstr "ไม่ยอมรับ"

#: ../../install_steps_gtk.pm_.c:628
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"เปลี่ยน  CD-ROM\n"
"\n"
"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"

#: ../../install_steps_gtk.pm_.c:646
msgid "There was an error installing packages:"
msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"

#: ../../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "มีปัญหาเกิดขึ้น"

#: ../../install_steps_interactive.pm_.c:71
msgid "License agreement"
msgstr "License agreement"

#: ../../install_steps_interactive.pm_.c:72
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:168
#: ../../install_steps_interactive.pm_.c:871
#: ../../standalone/keyboarddrake_.c:28
msgid "Keyboard"
msgstr "คีย์บอร์ด"

#: ../../install_steps_interactive.pm_.c:169
#: ../../standalone/keyboarddrake_.c:29
msgid "Please, choose your keyboard layout."
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: ../../install_steps_interactive.pm_.c:170
msgid "Here is the full list of keyboards available"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#: ../../install_steps_interactive.pm_.c:187
msgid "Which installation class do you want?"
msgstr "คุณต้องการติดตั้งประเภทใด"

#: ../../install_steps_interactive.pm_.c:189
msgid "Install/Update"
msgstr "ติดตั้ง/อัพเกรด "

#: ../../install_steps_interactive.pm_.c:189
msgid "Is this an install or an update?"
msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"

#: ../../install_steps_interactive.pm_.c:198
msgid "Recommended"
msgstr "แบบแนะนำ (Recommended)"

#: ../../install_steps_interactive.pm_.c:201
#: ../../install_steps_interactive.pm_.c:204
msgid "Expert"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: ../../install_steps_interactive.pm_.c:212
msgid "Update"
msgstr "Update"

#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
msgid "Please, choose the type of your mouse."
msgstr "คุณมีเม้าส์ชนิดใด"

#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
msgid "Mouse Port"
msgstr "พอร์ตของเม้าส์"

#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
msgid "Please choose on which serial port your mouse is connected to."
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: ../../install_steps_interactive.pm_.c:239
msgid "Buttons emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:241
msgid "Button 2 Emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:242
msgid "Button 3 Emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:261
msgid "Configuring PCMCIA cards..."
msgstr "กำลังคอนฟิกการ์ด PCMCIA..."

#: ../../install_steps_interactive.pm_.c:261
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:266
msgid "Configuring IDE"
msgstr "คอนฟิก IDE"

#: ../../install_steps_interactive.pm_.c:266
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:281
msgid "no available partitions"
msgstr "ไม่มีพาร์ติชั่นเหลือ"

#: ../../install_steps_interactive.pm_.c:284
msgid "Scanning partitions to find mount points"
msgstr "Scanning partitions to find mount points"

#: ../../install_steps_interactive.pm_.c:292
msgid "Choose the mount points"
msgstr "เลือกจุดเม้าท์"

#: ../../install_steps_interactive.pm_.c:311
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
"ข้อความผิดพลาดคือ %s\n"
"\n"
"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"

#: ../../install_steps_interactive.pm_.c:324
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"ดิสก์เดรก ล้มเหลวที่จะอ่านตารางพาร์ติชั่นให้ถูกต้อง\n"
"ถ้าทำงานต่ออาจมีข้อผิดพลาดได้!"

#: ../../install_steps_interactive.pm_.c:340
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: ../../install_steps_interactive.pm_.c:349
#, fuzzy
msgid "No root partition found to perform an upgrade"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: ../../install_steps_interactive.pm_.c:350
msgid "Root Partition"
msgstr "พาร์ติชั่นรูท"

#: ../../install_steps_interactive.pm_.c:351
msgid "What is the root partition (/) of your system?"
msgstr "พาร์ติชั่นใดเป็นรูทพาร์ติชั่น (/) ในระบบของคุณ"

#: ../../install_steps_interactive.pm_.c:365
msgid "You need to reboot for the partition table modifications to take place"
msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"

#: ../../install_steps_interactive.pm_.c:389
msgid "Choose the partitions you want to format"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: ../../install_steps_interactive.pm_.c:390
msgid "Check bad blocks?"
msgstr "ตรวจสอบ bad blocks"

#: ../../install_steps_interactive.pm_.c:416
msgid "Formatting partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: ../../install_steps_interactive.pm_.c:418
#, c-format
msgid "Creating and formatting file %s"
msgstr "กำลังสร้างและ format ไฟล์ %s"

#: ../../install_steps_interactive.pm_.c:421
msgid "Not enough swap to fulfill installation, please add some"
msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"

#: ../../install_steps_interactive.pm_.c:427
msgid "Looking for available packages"
msgstr "กำลังหาแพ็คเก็จที่มีอยู่"

#: ../../install_steps_interactive.pm_.c:433
msgid "Finding packages to upgrade"
msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"

#: ../../install_steps_interactive.pm_.c:450
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Complete (%dMB)"
msgstr "ทำเสร็จ (%dMB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Minimum (%dMB)"
msgstr "ขั้นต่ำ (%dMB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Recommended (%dMB)"
msgstr "แบบแนะนำ (%dMB)"

#: ../../install_steps_interactive.pm_.c:475
msgid "Custom"
msgstr "แบบปรับแก้ได้ (Customized) "

#: ../../install_steps_interactive.pm_.c:522
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: ../../install_steps_interactive.pm_.c:525
#, fuzzy
msgid "Load from floppy"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: ../../install_steps_interactive.pm_.c:527
#, fuzzy
msgid "Loading from floppy"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: ../../install_steps_interactive.pm_.c:527
#, fuzzy
msgid "Package selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: ../../install_steps_interactive.pm_.c:532
#, fuzzy
msgid "Insert a floppy containing package selection"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: ../../install_steps_interactive.pm_.c:544
msgid "Save on floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: ../../install_steps_interactive.pm_.c:605
msgid "Selected size is larger than available space"
msgstr ""

#: ../../install_steps_interactive.pm_.c:670
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"

#: ../../install_steps_interactive.pm_.c:675
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom labeled \"%s\""

#: ../../install_steps_interactive.pm_.c:704
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"กำลังติดตั้งแพ็คเก็จ %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:713
msgid "Post-install configuration"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: ../../install_steps_interactive.pm_.c:719
#, fuzzy, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: ../../install_steps_interactive.pm_.c:725
#, fuzzy, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: ../../install_steps_interactive.pm_.c:750
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""

#: ../../install_steps_interactive.pm_.c:782
msgid "Choose a mirror from which to get the packages"
msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"

#: ../../install_steps_interactive.pm_.c:793
msgid "Contacting the mirror to get the list of available packages"
msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"

#: ../../install_steps_interactive.pm_.c:796
msgid "Please choose the packages you want to install."
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: ../../install_steps_interactive.pm_.c:808
msgid "Which is your timezone?"
msgstr "คุณใช้ย่านเวลาใด? "

#: ../../install_steps_interactive.pm_.c:813
#, fuzzy
msgid "Hardware clock set to GMT"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"

#: ../../install_steps_interactive.pm_.c:814
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:821
#, fuzzy
msgid "NTP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: ../../install_steps_interactive.pm_.c:855
#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
msgid "Remote CUPS server"
msgstr "Remote CUPS server"

#: ../../install_steps_interactive.pm_.c:856
msgid "No printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
msgid "Summary"
msgstr "รวมความ"

#: ../../install_steps_interactive.pm_.c:870
msgid "Mouse"
msgstr "Mouse"

#: ../../install_steps_interactive.pm_.c:872
msgid "Timezone"
msgstr "โซนเวลา"

#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
#: ../../printerdrake.pm_.c:1844
msgid "Printer"
msgstr "เครื่องพิมพ์"

#: ../../install_steps_interactive.pm_.c:875
msgid "ISDN card"
msgstr "ISDN card"

#: ../../install_steps_interactive.pm_.c:878
msgid "Sound card"
msgstr "Sound card"

#: ../../install_steps_interactive.pm_.c:881
msgid "TV card"
msgstr "TV card"

#: ../../install_steps_interactive.pm_.c:917
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:945
msgid "LDAP"
msgstr ""

#: ../../install_steps_interactive.pm_.c:918
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:954
#, fuzzy
msgid "NIS"
msgstr "ใช้ NIS"

#: ../../install_steps_interactive.pm_.c:919
#: ../../install_steps_interactive.pm_.c:941
#, fuzzy
msgid "Local files"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: ../../install_steps_interactive.pm_.c:928
#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "เซ็ตรหัสผ่านรูท"

#: ../../install_steps_interactive.pm_.c:930
msgid "No password"
msgstr "ไม่มีรหัสผ่าน"

#: ../../install_steps_interactive.pm_.c:935
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"

#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
#: ../../standalone/draknet_.c:604
msgid "Authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: ../../install_steps_interactive.pm_.c:949
#, fuzzy
msgid "Authentication LDAP"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: ../../install_steps_interactive.pm_.c:950
msgid "LDAP Base dn"
msgstr ""

#: ../../install_steps_interactive.pm_.c:951
#, fuzzy
msgid "LDAP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: ../../install_steps_interactive.pm_.c:957
#, fuzzy
msgid "Authentication NIS"
msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"

#: ../../install_steps_interactive.pm_.c:958
msgid "NIS Domain"
msgstr "โดเมน NIS"

#: ../../install_steps_interactive.pm_.c:959
msgid "NIS Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: ../../install_steps_interactive.pm_.c:994
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่?\n"
"ถ้าใช่ กรุณาใส่แผ่น Diskette และกด \"OK\""

#: ../../install_steps_interactive.pm_.c:1010
msgid "First floppy drive"
msgstr "Floppy Drive เครื่องแรก"

#: ../../install_steps_interactive.pm_.c:1011
msgid "Second floppy drive"
msgstr "Floppy Drive เครื่องที่สอง"

#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
msgid "Skip"
msgstr "ข้ามไป"

#: ../../install_steps_interactive.pm_.c:1017
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่? "

#: ../../install_steps_interactive.pm_.c:1026
msgid "Sorry, no floppy drive available"
msgstr "ขออภัย ไม่มีฟล้อปปี้ไดรว์เลย"

#: ../../install_steps_interactive.pm_.c:1030
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "ให้เลือกฟล้อปปี้ไดรว์ที่คุณต้องการทำเป็นแผ่นบูต"

#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: ../../install_steps_interactive.pm_.c:1037
msgid "Creating bootdisk"
msgstr "กำลังสร้างแผ่นบูต"

#: ../../install_steps_interactive.pm_.c:1044
msgid "Preparing bootloader"
msgstr "กำลังเตรียมบูตโหลดเดอร์"

#: ../../install_steps_interactive.pm_.c:1055
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1060
msgid "Do you want to use aboot?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: ../../install_steps_interactive.pm_.c:1063
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"การติดตั้ง aboot ล้มเหลว\n"
"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"

#: ../../install_steps_interactive.pm_.c:1070
#, fuzzy
msgid "Installing bootloader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: ../../install_steps_interactive.pm_.c:1076
msgid "Installation of bootloader failed. The following error occured:"
msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#: ../../install_steps_interactive.pm_.c:1084
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
msgid "Low"
msgstr "ต่ำ"

#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
msgid "Medium"
msgstr "ปานกลาง"

#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
msgid "High"
msgstr "สูง"

#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
msgid "Choose security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../../install_steps_interactive.pm_.c:1134
#: ../../standalone/drakautoinst_.c:80
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: ../../install_steps_interactive.pm_.c:1138
#: ../../standalone/drakautoinst_.c:82
msgid "Creating auto install floppy"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: ../../install_steps_interactive.pm_.c:1149
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
"\n"
"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"

#: ../../install_steps_interactive.pm_.c:1160
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from http://www.mandrakelinux.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่มรีเทิร์นเพื่อรีบูต\n"
"\n"
"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
"โปรดอ่าน Errata ได้ที่ http://www.mandrakelinux.com/\n"
"\n"
"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"

#: ../../install_steps_interactive.pm_.c:1172
msgid "Generate auto install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"

#: ../../install_steps_interactive.pm_.c:1174
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
"ในกรณีนั้นมันจะใช้ harddisk  ทั้งหมด\n"
"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Automated"
msgstr "อัตโนมัติ"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Replay"
msgstr "เรียกอีกครั้ง"

#: ../../install_steps_interactive.pm_.c:1182
msgid "Save packages selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"

#: ../../install_steps_newt.pm_.c:34
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "

#: ../../interactive.pm_.c:73
msgid "kdesu missing"
msgstr "ไม่มี kdesu "

#: ../../interactive.pm_.c:132
#, fuzzy
msgid "Choose a file"
msgstr "เลือกกิจกรรม"

#: ../../interactive.pm_.c:284
msgid "Advanced"
msgstr "Advanced"

#: ../../interactive.pm_.c:345
msgid "Please wait"
msgstr "โปรดรอสักครู่"

#: ../../interactive_gtk.pm_.c:681
msgid "Expand Tree"
msgstr "ขยาย tree"

#: ../../interactive_gtk.pm_.c:682
msgid "Collapse Tree"
msgstr "ยุบ tree"

#: ../../interactive_gtk.pm_.c:683
msgid "Toggle between flat and group sorted"
msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "เกิดข้อขัดแย้ง (%s), โปรดเลือกให้ถูกต้อง\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (ค่าตั้งต้น %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s ให้ใส่ `none' เพื่อตัวเลือกว่าง) "

#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
msgid "Czech (QWERTZ)"
msgstr "เชคโกสโลวาเกีย (QWERTZ)"

#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
msgid "German"
msgstr "เยอรมัน"

#: ../../keyboard.pm_.c:142
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
msgid "Spanish"
msgstr "สเปน"

#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
msgid "Finnish"
msgstr "ฟินแลนด์"

#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
msgid "French"
msgstr "ฝรั่งเศษ"

#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
msgid "Norwegian"
msgstr "นอร์เวย์"

#: ../../keyboard.pm_.c:147
msgid "Polish"
msgstr "โปแลนด์"

#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
msgid "Russian"
msgstr "รัสเซีย"

#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
msgid "Swedish"
msgstr "สวีเดน"

#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
msgid "UK keyboard"
msgstr "อังกฤษ"

#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
msgid "US keyboard"
msgstr "อเมริกา"

#: ../../keyboard.pm_.c:159
#, fuzzy
msgid "Albanian"
msgstr "Iranian"

#: ../../keyboard.pm_.c:160
msgid "Armenian (old)"
msgstr "อาร์เมเนียน (เก่า)"

#: ../../keyboard.pm_.c:161
msgid "Armenian (typewriter)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: ../../keyboard.pm_.c:162
msgid "Armenian (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: ../../keyboard.pm_.c:167
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjani (latin)"

#: ../../keyboard.pm_.c:169
msgid "Belgian"
msgstr "เบลเยี่ยม"

#: ../../keyboard.pm_.c:170
msgid "Bulgarian"
msgstr "บัลกาเรีย"

#: ../../keyboard.pm_.c:171
msgid "Brazilian (ABNT-2)"
msgstr "บราซิล"

#: ../../keyboard.pm_.c:172
msgid "Belarusian"
msgstr "Belarusian"

#: ../../keyboard.pm_.c:173
msgid "Swiss (German layout)"
msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"

#: ../../keyboard.pm_.c:174
msgid "Swiss (French layout)"
msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"

#: ../../keyboard.pm_.c:179
msgid "Czech (QWERTY)"
msgstr "เชคโกสโลวาเกีย (QWERTY)"

#: ../../keyboard.pm_.c:181
msgid "German (no dead keys)"
msgstr "German (no dead keys)"

#: ../../keyboard.pm_.c:182
msgid "Danish"
msgstr "เดนมาร์ก"

#: ../../keyboard.pm_.c:183
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm_.c:184
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norwegian)"

#: ../../keyboard.pm_.c:185
msgid "Estonian"
msgstr "Estonian"

#: ../../keyboard.pm_.c:189
msgid "Georgian (\"Russian\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"

#: ../../keyboard.pm_.c:190
msgid "Georgian (\"Latin\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"

#: ../../keyboard.pm_.c:191
msgid "Greek"
msgstr "กรีก"

#: ../../keyboard.pm_.c:192
msgid "Hungarian"
msgstr "อังการี"

#: ../../keyboard.pm_.c:193
msgid "Croatian"
msgstr "Croatian"

#: ../../keyboard.pm_.c:194
msgid "Israeli"
msgstr "อิสราเอล"

#: ../../keyboard.pm_.c:195
msgid "Israeli (Phonetic)"
msgstr "อิลราเอล (โฟเนติค)"

#: ../../keyboard.pm_.c:196
msgid "Iranian"
msgstr "Iranian"

#: ../../keyboard.pm_.c:197
msgid "Icelandic"
msgstr "ไอซ์แลนด์"

#: ../../keyboard.pm_.c:198
msgid "Italian"
msgstr "อิตาลี"

#: ../../keyboard.pm_.c:200
msgid "Japanese 106 keys"
msgstr "Japanese 106 keys"

#: ../../keyboard.pm_.c:201
msgid "Korean keyboard"
msgstr "Korean keyboard"

#: ../../keyboard.pm_.c:202
msgid "Latin American"
msgstr "ละตินอเมริกา"

#: ../../keyboard.pm_.c:203
msgid "Lithuanian AZERTY (old)"
msgstr "Lithuanian AZERTY (old)"

#: ../../keyboard.pm_.c:205
msgid "Lithuanian AZERTY (new)"
msgstr "Lithuanian AZERTY (new)"

#: ../../keyboard.pm_.c:206
msgid "Lithuanian \"number row\" QWERTY"
msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"

#: ../../keyboard.pm_.c:207
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"

#: ../../keyboard.pm_.c:208
#, fuzzy
msgid "Latvian"
msgstr "ตำแหน่ง"

#: ../../keyboard.pm_.c:209
msgid "Macedonian"
msgstr "Macedonian"

#: ../../keyboard.pm_.c:210
msgid "Dutch"
msgstr "ฮอลแลนด์"

#: ../../keyboard.pm_.c:212
msgid "Polish (qwerty layout)"
msgstr "Polish (qwerty layout)"

#: ../../keyboard.pm_.c:213
msgid "Polish (qwertz layout)"
msgstr "Polish (qwertz layout)"

#: ../../keyboard.pm_.c:214
msgid "Portuguese"
msgstr "โปรตุเกส"

#: ../../keyboard.pm_.c:215
msgid "Canadian (Quebec)"
msgstr "คานาดา (ควิเบค)"

#: ../../keyboard.pm_.c:217
#, fuzzy
msgid "Romanian (qwertz)"
msgstr "รัสเซีย (Yawerty)"

#: ../../keyboard.pm_.c:218
#, fuzzy
msgid "Romanian (qwerty)"
msgstr "รัสเซีย (Yawerty)"

#: ../../keyboard.pm_.c:220
msgid "Russian (Yawerty)"
msgstr "รัสเซีย (Yawerty)"

#: ../../keyboard.pm_.c:222
msgid "Slovenian"
msgstr "สโลวาเนีย"

#: ../../keyboard.pm_.c:226
msgid "Slovakian (QWERTZ)"
msgstr "สโลวาเกีย (QWERTZ)"

#: ../../keyboard.pm_.c:227
msgid "Slovakian (QWERTY)"
msgstr "สโลวาเกีย (QWERTY)"

#: ../../keyboard.pm_.c:229
#, fuzzy
msgid "Serbian (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: ../../keyboard.pm_.c:230
msgid "Thai keyboard"
msgstr "ไทย"

#: ../../keyboard.pm_.c:232
#, fuzzy
msgid "Tajik keyboard"
msgstr "ไทย"

#: ../../keyboard.pm_.c:233
msgid "Turkish (traditional \"F\" model)"
msgstr "ตุรกี (โมเดลแบบแผน \"F\")"

#: ../../keyboard.pm_.c:234
msgid "Turkish (modern \"Q\" model)"
msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"

#: ../../keyboard.pm_.c:235
msgid "Ukrainian"
msgstr "ยูเครน"

#: ../../keyboard.pm_.c:238
msgid "US keyboard (international)"
msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"

#: ../../keyboard.pm_.c:239
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamese \"numeric row\" QWERTY"

#: ../../keyboard.pm_.c:240
#, fuzzy
msgid "Yugoslavian (latin)"
msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Circular mounts %s\n"

#: ../../lvm.pm_.c:83
msgid "Remove the logical volumes first\n"
msgstr "ลบ logical volume ก่อน\n"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Standard"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Generic PS2 Wheel Mouse"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
msgid "1 button"
msgstr "1 ปุ่ม"

#: ../../mouse.pm_.c:44
msgid "Generic"
msgstr "Generic"

#: ../../mouse.pm_.c:45
msgid "Wheel"
msgstr "Wheel"

#: ../../mouse.pm_.c:48
msgid "serial"
msgstr "พอร์ตอนุกรม"

#: ../../mouse.pm_.c:50
msgid "Generic 2 Button Mouse"
msgstr "Generic 2 Button Mouse"

#: ../../mouse.pm_.c:51
msgid "Generic 3 Button Mouse"
msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"

#: ../../mouse.pm_.c:52
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:53
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:54
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:56
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: ../../mouse.pm_.c:57
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:59
msgid "MM Series"
msgstr "MM Series"

#: ../../mouse.pm_.c:60
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:61
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"

#: ../../mouse.pm_.c:65
msgid "busmouse"
msgstr "busmouse"

#: ../../mouse.pm_.c:68
msgid "2 buttons"
msgstr "2 buttons"

#: ../../mouse.pm_.c:69
msgid "3 buttons"
msgstr "3 buttons"

#: ../../mouse.pm_.c:72
msgid "none"
msgstr "ไม่มี"

#: ../../mouse.pm_.c:74
msgid "No mouse"
msgstr "ไม่มีเม้าส์"

#: ../../mouse.pm_.c:482
msgid "Please test the mouse"
msgstr "กรุณาทดสอบเม้าส์"

#: ../../mouse.pm_.c:483
msgid "To activate the mouse,"
msgstr "เพื่อให้เม้าส์ทำงาน"

#: ../../mouse.pm_.c:484
msgid "MOVE YOUR WHEEL!"
msgstr "เลื่อนล้อของคุณ"

#: ../../my_gtk.pm_.c:380
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""

#: ../../my_gtk.pm_.c:415
msgid "Finish"
msgstr "ฟินแลนด์"

#: ../../my_gtk.pm_.c:415
msgid "Next ->"
msgstr "Next ->"

#: ../../my_gtk.pm_.c:416
msgid "<- Previous"
msgstr "<- ก่อน"

#: ../../my_gtk.pm_.c:716
msgid "Is this correct?"
msgstr "ถูกต้องหรือไม่?"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "ต่อเข้า Internet "

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
"บางครั้งอาจใช้  pptp มีน้อยคนที่ใช้  dhcp.\n"
"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr ""

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "ใช้ dhcp"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "ใช้ pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "ใช้ pptp"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr ""
"ชนิดของ dhcp client ที่ต้องการใช้คืออะไร\n"
"การเลือกเบื้องต้นคือ dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"ไม่พบการ์ด ethernet \n"
"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
msgid "Choose the network interface"
msgstr "เลือก network interface"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
msgid "Configuring network"
msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"โปรดใส่ชื่อของโฮสต์\n"
"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
msgid "Host name"
msgstr "ชื่อโฮสต์:"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
#: ../../network/netconnect.pm_.c:221
msgid "Network Configuration Wizard"
msgstr "Network Configuration Wizard"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "External ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Internal ISDN card"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerfull\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""

#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "New configuration (isdn-light)"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "Old configuration (isdn4net)"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
#: ../../network/isdn.pm_.c:214
msgid "ISDN Configuration"
msgstr "การคอนฟิก ISDN"

#: ../../network/isdn.pm_.c:169
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"เลือกผู้ให้บริการ\n"
"ถ้าไม่มีเลือก ไม่มี (unlisted)"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol"
msgstr "Boot Protocol"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol (EDSS1)"
msgstr "ยุโรป (EDS11)"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid "Protocol for the rest of the world"
msgstr "Rest of the world"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid ""
"Protocol for the rest of the world \n"
" no D-Channel (leased lines)"
msgstr ""
"Rest of the world \n"
" no D-Channel (leased lines)"

#: ../../network/isdn.pm_.c:188
msgid "Which protocol do you want to use ?"
msgstr "Protocol ไหนที่คุณต้องการ"

#: ../../network/isdn.pm_.c:198
msgid "What kind of card do you have?"
msgstr "คุณมีการ์ดชนิดใด?"

#: ../../network/isdn.pm_.c:199
msgid "I don't know"
msgstr "ผมไม่ทราบ"

#: ../../network/isdn.pm_.c:199
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:199
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:205
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
"\n"
"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"

#: ../../network/isdn.pm_.c:209
msgid "Abort"
msgstr "เลิก"

#: ../../network/isdn.pm_.c:209
msgid "Continue"
msgstr "ทำงานต่อหรือไม่?"

#: ../../network/isdn.pm_.c:215
msgid "Which is your ISDN card ?"
msgstr "คุณใช้การ์ด ISDN ใด?"

#: ../../network/isdn.pm_.c:234
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"

#: ../../network/isdn.pm_.c:243
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "ไม่พบการ์ด ISDN PCI  กรุณาเลือกจากหน้าต่อไป"

#: ../../network/modem.pm_.c:37
msgid "Please choose which serial port your modem is connected to."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: ../../network/modem.pm_.c:42
msgid "Dialup options"
msgstr "อ็อปชั่นของการหมุนโทรศัพท์"

#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
msgid "Connection name"
msgstr "ชื่อการเชื่อมต่อ"

#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
msgid "Phone number"
msgstr "หมายเลขโทรศัพท์"

#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
msgid "Login ID"
msgstr "หมายเลขประจำตัวการล็อกอิน"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "CHAP"
msgstr ""

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Script-based"
msgstr "รูปแบบสคริปต์"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Terminal-based"
msgstr "รูปแบบเทอร์มินอล"

#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
msgid "Domain name"
msgstr "ชื่อโดเมน"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
msgid "First DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"

#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
msgid "Second DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"

#: ../../network/netconnect.pm_.c:33
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"

#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"คุณสามารถคอนฟิกระบบเน็ตเวิร์กใหม่"

#: ../../network/netconnect.pm_.c:33
msgid "You are currently connected to internet."
msgstr "คุณติดต่อกับ Internet อยู่"

#: ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"คุณสามารถเชื่อมต่อ Internet หรือทำการแก้ใขการเชื่อมต่อใหม่"

#: ../../network/netconnect.pm_.c:36
msgid "You are not currently connected to Internet."
msgstr "คุณยังไม่ได้ต่อกับ Internet อยู่"

#: ../../network/netconnect.pm_.c:40
msgid "Connect to Internet"
msgstr "เชื่อมต่อ Internet"

#: ../../network/netconnect.pm_.c:42
msgid "Disconnect from Internet"
msgstr "จบการเชื่อมต่อ Internet "

#: ../../network/netconnect.pm_.c:44
msgid "Configure network connection (LAN or Internet)"
msgstr "คอนฟิกระบบเน็ตเวิร์ก (Lan หรือ Internet)"

#: ../../network/netconnect.pm_.c:47
msgid "Internet connection & configuration"
msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"

#: ../../network/netconnect.pm_.c:96
#, fuzzy, c-format
msgid "We are now going to configure the %s connection."
msgstr ""
"\n"
"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"

#: ../../network/netconnect.pm_.c:105
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"

#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
msgid "Network Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: ../../network/netconnect.pm_.c:130
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"

#: ../../network/netconnect.pm_.c:155
msgid ""
"Welcome to The Network Configuration Wizard\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"ยินดีต้อนรับสู่ Network Configuration Wizard\n"
"\n"
"เรากำลังจะปรับแต่ง internet/network \n"
"ถ้าคุณไม่ต้องการ auto detection กรุณายกเลิก checkbox.\n"

#: ../../network/netconnect.pm_.c:157
msgid "Choose the profile to configure"
msgstr "เลือก profile ที่จะปรับแต่ง"

#: ../../network/netconnect.pm_.c:158
msgid "Use auto detection"
msgstr "ใช้ auto detection"

#: ../../network/netconnect.pm_.c:164
msgid "Detecting devices..."
msgstr "กำลังตรวจสอบอุปกรณ์..."

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
msgid "Normal modem connection"
msgstr "การติดต่อโดยใช้ Modem ธรรมดา"

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
#, c-format
msgid "detected on port %s"
msgstr "ค้นหาเจอบน port %s"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
msgid "ISDN connection"
msgstr "การติดต่อโดยใช้ ISDN"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
#, c-format
msgid "detected %s"
msgstr "ค้นพบ %s"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, fuzzy
msgid "ADSL connection"
msgstr "LAN connection"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, c-format
msgid "detected on interface %s"
msgstr "ค้นหาเจอบน interface %s"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "Cable connection"
msgstr "cable connection"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
#, fuzzy
msgid "cable connection detected"
msgstr "cable connection"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "LAN connection"
msgstr "LAN connection"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "ethernet card(s) detected"
msgstr "ethernet card(s) ที่พบ"

#: ../../network/netconnect.pm_.c:190
#, fuzzy
msgid "Choose the connection you want to configure"
msgstr "เลือกเครื่องมือที่คุณต้องการใช้"

#: ../../network/netconnect.pm_.c:214
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: ../../network/netconnect.pm_.c:215
#, fuzzy
msgid "Internet connection"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: ../../network/netconnect.pm_.c:221
msgid "Do you want to start the connection at boot?"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: ../../network/netconnect.pm_.c:239
msgid "Network configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: ../../network/netconnect.pm_.c:240
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:243
#, fuzzy, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: ../../network/netconnect.pm_.c:247
msgid ""
"Congratulations, the network and internet configuration is finished.\n"
"\n"
"The configuration will now be applied to your system.\n"
msgstr ""
"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
"\n"
"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"

#: ../../network/netconnect.pm_.c:250
msgid ""
"After that is done, we recommend you to restart your X\n"
"environnement to avoid hostname changing problem."
msgstr ""
"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"

#: ../../network/network.pm_.c:283
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
" "

#: ../../network/network.pm_.c:288
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"

#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
#, c-format
msgid "Configuring network device %s"
msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"

#: ../../network/network.pm_.c:298
#, c-format
msgid " (driver %s)"
msgstr " (driver %s)"

#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
#: ../../standalone/draknet_.c:461
msgid "IP address"
msgstr "ค่า IP"

#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
msgid "Netmask"
msgstr "เน็ตมาสก์"

#: ../../network/network.pm_.c:302
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:302
msgid "Automatic IP"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
msgid "IP address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: ../../network/network.pm_.c:351
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"โปรดใส่ชื่อของโฮสต์\n"
"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"

#: ../../network/network.pm_.c:356
msgid "DNS server"
msgstr "เซิร์ฟเวอร์ DNS"

#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
msgid "Gateway"
msgstr "เกตเวย์"

#: ../../network/network.pm_.c:359
msgid "Gateway device"
msgstr "อุปกรณ์เกตเวย์"

#: ../../network/network.pm_.c:371
msgid "Proxies configuration"
msgstr "การคอนฟิก Proxies"

#: ../../network/network.pm_.c:372
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: ../../network/network.pm_.c:373
msgid "FTP proxy"
msgstr "FTP proxy"

#: ../../network/network.pm_.c:374
msgid "Track network card id (usefull for laptops)"
msgstr ""

#: ../../network/network.pm_.c:377
msgid "Proxy should be http://..."
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: ../../network/network.pm_.c:378
msgid "Proxy should be ftp://..."
msgstr "ค่าของ Proxy ควรจะเป็น ftp://..."

#: ../../network/tools.pm_.c:38
msgid "Internet configuration"
msgstr "การคอนฟิก Internet"

#: ../../network/tools.pm_.c:39
msgid "Do you want to try to connect to the Internet now?"
msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"

#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
msgid "Testing your connection..."
msgstr "ทดสอบ connection..."

#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
msgid "The system is now connected to Internet."
msgstr "ติดต่อเข้า Internet เรียบร้อย"

#: ../../network/tools.pm_.c:50
msgid "For Security reason, it will be disconnected now."
msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"

#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"ไม่สามารถต่อเข้า Internet \n"
"ลองทำการคอนฟิกใหม่อีกครั้ง"

#: ../../network/tools.pm_.c:75
msgid "Connection Configuration"
msgstr "การคอนฟิก Connection"

#: ../../network/tools.pm_.c:76
msgid "Please fill or check the field below"
msgstr "กรุณาเลือกช่องข้างล่างนี้"

#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
msgid "Card IRQ"
msgstr "Card IRQ"

#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
msgid "Card mem (DMA)"
msgstr "Card mem (DMA)"

#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
msgid "Card IO"
msgstr "Card IO"

#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
msgid "Card IO_0"
msgstr "Card IO_0"

#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
msgid "Card IO_1"
msgstr "Card IO_1"

#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
msgid "Your personal phone number"
msgstr "เบอร์โทรศัพท์ส่วนตัว"

#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
msgid "Provider name (ex provider.net)"
msgstr "ชื่อผู้ให้บริการ (ex KSC)"

#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
msgid "Provider phone number"
msgstr "หมายเลขโทรศัพท์"

#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
msgid "Provider dns 1 (optional)"
msgstr "ผู้ให้บริการ dns 1 (optional)"

#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
msgid "Provider dns 2 (optional)"
msgstr "ผู้ให้บริการ dns 2 (optional)"

#: ../../network/tools.pm_.c:88
#, fuzzy
msgid "Choose your country"
msgstr "เลือกคีย์บอร์ด"

#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
msgid "Dialing mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
#, fuzzy
msgid "Connection speed"
msgstr "ชนิดการเชื่อมต่อ"

#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
#, fuzzy
msgid "Connection timeout (in sec)"
msgstr "ชนิดการเชื่อมต่อ"

#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
msgid "Account Login (user name)"
msgstr "Account Login (user name)"

#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
msgid "Account Password"
msgstr "รหัสผ่าน"

#: ../../partition_table.pm_.c:622
msgid "Extended partition not supported on this platform"
msgstr "Extended partition not supported on this platform"

#: ../../partition_table.pm_.c:640
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"คุณมีช่องว่างในตารางพาร์ติชั่น  แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"

#: ../../partition_table.pm_.c:744
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"

#: ../../partition_table.pm_.c:746
msgid "Bad backup file"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: ../../partition_table.pm_.c:768
#, c-format
msgid "Error writing to file %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: ../../partition_table_raw.pm_.c:154
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
"สอบความถูกต้องของข้อมูลได้\n"
"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"

#: ../../pkgs.pm_.c:24
msgid "must have"
msgstr "ต้องมี"

#: ../../pkgs.pm_.c:25
msgid "important"
msgstr "สำคัญ"

#: ../../pkgs.pm_.c:26
msgid "very nice"
msgstr "ดีมาก"

#: ../../pkgs.pm_.c:27
msgid "nice"
msgstr "ดี"

#: ../../pkgs.pm_.c:28
msgid "maybe"
msgstr "อาจจะ"

#: ../../printer.pm_.c:23
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: ../../printer.pm_.c:24
msgid "LPRng - LPR New Generation"
msgstr ""

#: ../../printer.pm_.c:25
msgid "LPD - Line Printer Daemon"
msgstr ""

#: ../../printer.pm_.c:26
msgid "PDQ - Print, Don't Queue"
msgstr ""

#: ../../printer.pm_.c:32
msgid "CUPS"
msgstr ""

#: ../../printer.pm_.c:33
msgid "LPRng"
msgstr ""

#: ../../printer.pm_.c:34
msgid "LPD"
msgstr ""

#: ../../printer.pm_.c:35
msgid "PDQ"
msgstr ""

#: ../../printer.pm_.c:40
msgid "Local printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: ../../printer.pm_.c:41
msgid "Remote printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: ../../printer.pm_.c:42
#, fuzzy
msgid "Printer on remote CUPS server"
msgstr "Remote CUPS server"

#: ../../printer.pm_.c:43
#, fuzzy
msgid "Printer on remote lpd server"
msgstr "รีโมต lpd"

#: ../../printer.pm_.c:44
msgid "Network printer (socket)"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: ../../printer.pm_.c:45
#, fuzzy
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/วินโดวส์ 95/98/NT"

#: ../../printer.pm_.c:46
#, fuzzy
msgid "Printer on NetWare server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: ../../printer.pm_.c:47
#, fuzzy
msgid "Enter a printer device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: ../../printer.pm_.c:48
msgid "Pipe job into a command"
msgstr ""

#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
msgid "Unknown model"
msgstr ""

#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer.pm_.c:693
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(โมดูล %s)"

#: ../../printer.pm_.c:695
msgid "(on this machine)"
msgstr ""

#: ../../printerdrake.pm_.c:22
msgid "Select Printer Connection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:23
msgid "How is the printer connected?"
msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"

#: ../../printerdrake.pm_.c:25
#, fuzzy
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure\n"
"here; these printers will be automatically detected. Please\n"
"select \"Printer on remote CUPS server\" in this case."
msgstr ""
"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
"ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""

#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
#, fuzzy
msgid "None"
msgstr "ทำเรียบร้อยแล้ว"

#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
#, fuzzy
msgid "Choose a default printer!"
msgstr "เลือกผู้ใช้ default"

#: ../../printerdrake.pm_.c:105
msgid ""
"With remote CUPS servers, you do not have to configure any \n"
"printer here; CUPS servers inform your machine automatically\n"
"about their printers. All printers known to your machine\n"
"currently are listed in the \"Default printer\" field. Choose\n"
"the default printer for your machine there and click the\n"
"\"Apply/Re-read printers\" button. Click the same button to\n"
"refresh the list (it can take up to 30 seconds after the start\n"
"of CUPS until all remote printers are visible).\n"
"When your CUPS server is in a different network, you have to \n"
"give the CUPS server IP address and optionally the port number\n"
"to get the printer information from the server, otherwise leave\n"
"these fields blank."
msgstr ""

#: ../../printerdrake.pm_.c:117
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your\n"
"network environment, so that you can access the printers on the\n"
"CUPS servers in your local network. If this does not work \n"
"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
"CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
#, fuzzy
msgid "Close"
msgstr "Mouse"

#: ../../printerdrake.pm_.c:125
#, fuzzy
msgid "Apply/Re-read printers"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: ../../printerdrake.pm_.c:129
#, fuzzy
msgid "The IP address should look like 192.168.1.20"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
#, fuzzy
msgid "The port number should be an integer!"
msgstr "Port number ควรเป็นตัวเลข"

#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
#, fuzzy
msgid "Default printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: ../../printerdrake.pm_.c:146
msgid "CUPS server IP"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:149
#, fuzzy
msgid "Automatic CUPS configuration"
msgstr "Boot Style Configuration"

#: ../../printerdrake.pm_.c:217
#, fuzzy
msgid "Detecting devices ..."
msgstr "กำลังตรวจสอบอุปกรณ์..."

#: ../../printerdrake.pm_.c:217
msgid "Test ports"
msgstr "กำลังตรวจสอบพอร์ต"

#: ../../printerdrake.pm_.c:238
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "ตรวจพบเครื่องพิมพ์โมเดล \"%s\""

#: ../../printerdrake.pm_.c:255
msgid "Local Printer Device"
msgstr "อุปกรณ์เครื่องพิมพ์โลคอล"

#: ../../printerdrake.pm_.c:256
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"อุปกรณ์ที่เครื่องพิมพ์ของคุณเชื่อมต่ออยู่คือ \n"
"( /dev/lp0 จะเทีบเท่ากับ LPT1:)?\n"

#: ../../printerdrake.pm_.c:258
msgid "Printer Device"
msgstr "อุปกรณ์เครื่องพิมพ์"

#: ../../printerdrake.pm_.c:261
msgid "Device/file name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
#: ../../printerdrake.pm_.c:786
#, fuzzy
msgid "Reading printer database ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:312
msgid "Remote lpd Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: ../../printerdrake.pm_.c:313
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply\n"
"the hostname of the printer server and the printer name\n"
"on that server."
msgstr ""
"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"

#: ../../printerdrake.pm_.c:316
#, fuzzy
msgid "Remote host name"
msgstr "ชื่อโฮสต์รีโมท"

#: ../../printerdrake.pm_.c:317
#, fuzzy
msgid "Remote printer name"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: ../../printerdrake.pm_.c:320
#, fuzzy
msgid "Remote host name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: ../../printerdrake.pm_.c:324
#, fuzzy
msgid "Remote printer name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: ../../printerdrake.pm_.c:392
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"

#: ../../printerdrake.pm_.c:393
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"

#: ../../printerdrake.pm_.c:398
msgid "SMB server host"
msgstr "ชื่อโฮสต์ของ SMB server"

#: ../../printerdrake.pm_.c:399
msgid "SMB server IP"
msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"

#: ../../printerdrake.pm_.c:400
msgid "Share name"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: ../../printerdrake.pm_.c:403
msgid "Workgroup"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: ../../printerdrake.pm_.c:410
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: ../../printerdrake.pm_.c:414
msgid "Samba share name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:473
msgid "NetWare Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"

#: ../../printerdrake.pm_.c:474
msgid ""
"To print on a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"

#: ../../printerdrake.pm_.c:478
msgid "Printer Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: ../../printerdrake.pm_.c:479
msgid "Print Queue Name"
msgstr "ชื่อพรินต์คิว"

#: ../../printerdrake.pm_.c:484
msgid "NCP server name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:488
msgid "NCP queue name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:527
msgid "Socket Printer Options"
msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"

#: ../../printerdrake.pm_.c:528
#, fuzzy
msgid ""
"To print to a socket printer, you need to provide the\n"
"host name of the printer and optionally the port number.\n"
"On HP JetDirect servers the port number is usually 9100,\n"
"on other servers it can vary. See the manual of your\n"
"hardware."
msgstr ""
"To print to a socket printer, you need to provide the\n"
"hostname of the printer and optionally the port number."

#: ../../printerdrake.pm_.c:533
#, fuzzy
msgid "Printer host name"
msgstr "ชื่อของเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:537
#, fuzzy
msgid "Printer host name missing!"
msgstr "ชื่อของเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
msgid "Printer Device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: ../../printerdrake.pm_.c:567
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: ../../printerdrake.pm_.c:582
msgid "A valid URI must be entered!"
msgstr ""

#: ../../printerdrake.pm_.c:682
msgid ""
"Every printer needs a name (for example lp).\n"
"The Description and Location fields do not need \n"
"to be filled in. They are comments for the users."
msgstr ""

#: ../../printerdrake.pm_.c:685
msgid "Name of printer"
msgstr "ชื่อเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:686
msgid "Description"
msgstr "รายละเอียด"

#: ../../printerdrake.pm_.c:687
msgid "Location"
msgstr "ตำแหน่ง"

#: ../../printerdrake.pm_.c:701
#, fuzzy
msgid "Preparing printer database ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:793
#, fuzzy
msgid "Printer model selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:794
#, fuzzy
msgid "Which printer model do you have?"
msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"

#: ../../printerdrake.pm_.c:866
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "การคอนฟิก Internet"

#: ../../printerdrake.pm_.c:867
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they\n"
"work only when connected to the first parallel port. When\n"
"your printer is connected to another port or to a print\n"
"server box please connect the printer to the first parallel\n"
"port before you print a test page. Otherwise the printer\n"
"will not work. Your connection type setting will be ignored\n"
"by the driver."
msgstr ""

#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "การคอนฟิก Internet"

#: ../../printerdrake.pm_.c:917
msgid ""
"The inkjet printer drivers provided by Lexmark only support\n"
"local printers, no printers on remote machines or print server\n"
"boxes. Please connect your printer to a local port or\n"
"configure it on the machine where it is connected to."
msgstr ""

#: ../../printerdrake.pm_.c:947
msgid ""
"To be able to print with your Lexmark inkjet and this\n"
"configuration, you need the inkjet printer drivers\n"
"provided by Lexmark (http://www.lexmark.com/). Go to\n"
"the US site and click on the \"Drivers\" button. Then\n"
"choose your model and afterwards \"Linux\" as\n"
"operating system. The drivers come as RPM packages\n"
"or shell scripts with interactive graphical installation.\n"
"You do not need to do this configuration by the\n"
"graphical frontends. Cancel directly after the license\n"
"agreement. Then print printhead alignment pages with\n"
"\"lexmarkmaintain\" and adjust the head alignment\n"
"settings with this program."
msgstr ""

#: ../../printerdrake.pm_.c:1079
msgid ""
"Printer default settings\n"
"You should make sure that the page size and the\n"
"ink type (if available) are set correctly. Note\n"
"that with a very high printout quality printing\n"
"can get substantially slower."
msgstr ""

#: ../../printerdrake.pm_.c:1090
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: ../../printerdrake.pm_.c:1094
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: ../../printerdrake.pm_.c:1099
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: ../../printerdrake.pm_.c:1136
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: ../../printerdrake.pm_.c:1152
#, fuzzy
msgid "Test pages"
msgstr "กำลังตรวจสอบพอร์ต"

#: ../../printerdrake.pm_.c:1153
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed\n"
"and on laser printers with too low memory it can even not come out.\n"
"In most cases it is enough to print the standard test page."
msgstr ""

#: ../../printerdrake.pm_.c:1158
#, fuzzy
msgid "No test pages"
msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"

#: ../../printerdrake.pm_.c:1159
#, fuzzy
msgid "Print"
msgstr "เครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1161
#, fuzzy
msgid "Standard test page"
msgstr "เครื่องมีอ Standard"

#: ../../printerdrake.pm_.c:1164
msgid "Alternative test page (Letter)"
msgstr ""

#: ../../printerdrake.pm_.c:1167
#, fuzzy
msgid "Alternative test page (A4)"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: ../../printerdrake.pm_.c:1169
#, fuzzy
msgid "Photo test page"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
msgid "Printing test page(s)..."
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: ../../printerdrake.pm_.c:1200
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"สถานะการพิมพ์:\n"
"%s\n"
"\n"
"มันทำงานถูกต้องใหมครับ"

#: ../../printerdrake.pm_.c:1204
#, fuzzy
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"มันทำงานถูกต้องใหมครับ"

#: ../../printerdrake.pm_.c:1211
msgid "Did it work properly?"
msgstr ""

#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
#, fuzzy
msgid "Raw printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1237
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1239
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
#: ../../printerdrake.pm_.c:1266
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
msgid ""
"To get a list of the options available for the current printer read either "
"the list shown below or click on the \"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
#: ../../printerdrake.pm_.c:1275
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1273
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1277
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1281
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1292
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: ../../printerdrake.pm_.c:1294
#, fuzzy
msgid "Print option list"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
#: ../../standalone/printerdrake_.c:48
#, fuzzy
msgid "Reading printer data ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
#: ../../printerdrake.pm_.c:1411
#, fuzzy
msgid "Transfer printer configuration"
msgstr "การคอนฟิก Internet"

#: ../../printerdrake.pm_.c:1339
#, c-format
msgid ""
"You can copy the printer configuration which you have done \n"
"for the spooler %s to %s, your current spooler. All the\n"
"configuration data (printer name, description, location, \n"
"connection type, and default option settings) is overtaken,\n"
"but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following \n"
"reasons:\n"
msgstr ""

#: ../../printerdrake.pm_.c:1347
msgid ""
"CUPS does not support printers on Novell servers or printers\n"
"sending the data into a free-formed command.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1350
msgid ""
"PDQ only supports local printers, remote LPD printers, and\n"
"Socket/TCP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1353
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1355
msgid ""
"In addition, queues not created with this program or\n"
"\"foomatic-configure\" cannot be transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1357
msgid ""
"\n"
"Also printers configured with the PPD files provided by\n"
"their manufacturers or with native CUPS drivers can not be\n"
"transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1360
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printerdrake.pm_.c:1363
msgid "Do not transfer printers"
msgstr ""

#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
msgid "Transfer"
msgstr ""

#: ../../printerdrake.pm_.c:1377
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printerdrake.pm_.c:1385
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: ../../printerdrake.pm_.c:1390
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printerdrake.pm_.c:1398
#, fuzzy
msgid "New printer name"
msgstr "ไม่มีเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1401
#, c-format
msgid "Transferring %s ..."
msgstr ""

#: ../../printerdrake.pm_.c:1412
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"),\n"
"Should it be also the default printer under the\n"
"new printing system %s?"
msgstr ""

#: ../../printerdrake.pm_.c:1423
#, fuzzy
msgid "Refreshing printer data ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
#: ../../printerdrake.pm_.c:1515
#, fuzzy
msgid "Configuration of a remote printer"
msgstr "การคอนฟิก"

#: ../../printerdrake.pm_.c:1432
#, fuzzy
msgid "Starting network ..."
msgstr "ทดสอบ connection..."

#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
#: ../../printerdrake.pm_.c:1464
#, fuzzy
msgid "Configure the network now"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: ../../printerdrake.pm_.c:1455
#, fuzzy
msgid "Network functionality not configured"
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: ../../printerdrake.pm_.c:1456
msgid ""
"You are going to configure a remote printer. This needs working\n"
"network access, but your network is not configured yet. If you\n"
"go on without network configuration, you will not be able to use\n"
"the printer which you are configuring now. How do you want \n"
"to proceed?"
msgstr ""

#: ../../printerdrake.pm_.c:1463
#, fuzzy
msgid "Go on without configuring the network"
msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"

#: ../../printerdrake.pm_.c:1496
msgid ""
"The network configuration done during the installation \n"
"cannot be started now. Please check whether the network\n"
"gets accessable after booting your system and correct the\n"
"configuration using the Mandrake Control Center, section\n"
"\"Network & Internet\"/\"Connection\", and afterwards set\n"
"up the printer, also using the Mandrake Control Center,\n"
"section \"Hardware\"/\"Printer\""
msgstr ""

#: ../../printerdrake.pm_.c:1503
msgid ""
"The network access was not running and could not be \n"
"started. Please check your configuration and your \n"
"hardware. Then try to configure your remote printer\n"
"again."
msgstr ""

#: ../../printerdrake.pm_.c:1516
#, fuzzy
msgid "Restarting printing system ..."
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "high"
msgstr "สูง"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "paranoid"
msgstr "Paranoid"

#: ../../printerdrake.pm_.c:1549
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printerdrake.pm_.c:1550
#, c-format
msgid ""
"You are about to install the printing system %s on\n"
"a system running in the %s security level.\n"
"\n"
"This printing system runs a daemon (background process)\n"
"which waits for print jobs and handles them. This daemon\n"
"is also accessable by remote machines through the network\n"
"and so it is a possible point for attacks. Therefore only\n"
"a few selected daemons are started by default in this\n"
"security level.\n"
"\n"
"Do you really want to configure printing on this\n"
"machine?"
msgstr ""

#: ../../printerdrake.pm_.c:1584
#, fuzzy
msgid "Starting the printing system at boot time"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: ../../printerdrake.pm_.c:1585
#, c-format
msgid ""
"The printing system (%s) will not be started automatically\n"
"when the machine is booted.\n"
"\n"
"It is possible that the automatic starting was turned off \n"
"by changing to a higher security level, because the printing\n"
"system is a potential point for attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing\n"
"system turned on again?"
msgstr ""

#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
#: ../../printerdrake.pm_.c:1778
msgid "Checking installed software..."
msgstr ""

#: ../../printerdrake.pm_.c:1648
msgid "Removing LPRng..."
msgstr ""

#: ../../printerdrake.pm_.c:1675
msgid "Removing LPD..."
msgstr ""

#: ../../printerdrake.pm_.c:1727
#, fuzzy
msgid "Select Printer Spooler"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1728
#, fuzzy
msgid "Which printing system (spooler) do you want to use?"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: ../../printerdrake.pm_.c:1759
#, fuzzy, c-format
msgid "Configuring printer \"%s\" ..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
msgid "Printer options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1815
#, fuzzy
msgid "Preparing PrinterDrake ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:1845
#, fuzzy
msgid "Would you like to configure printing?"
msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"

#: ../../printerdrake.pm_.c:1857
msgid "Printing system: "
msgstr ""

#: ../../printerdrake.pm_.c:1879
msgid ""
"The following printers are configured.\n"
"Click on one of them to modify it or\n"
"to get information about it or on \n"
"\"Add Printer\" to add a new printer."
msgstr ""

#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
msgid "Normal Mode"
msgstr "โหมดธรรมดา"

#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
msgid " (Default)"
msgstr " (Default)"

#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
#, fuzzy
msgid "Printer(s) on remote CUPS server(s)"
msgstr "Remote CUPS server"

#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
#, fuzzy
msgid "Printer(s) on remote server(s)"
msgstr "Remote CUPS server"

#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
#, fuzzy
msgid "Add printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
#: ../../printerdrake.pm_.c:2128
#, fuzzy
msgid "Do you want to configure another printer?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: ../../printerdrake.pm_.c:2003
#, fuzzy
msgid "Modify printer configuration"
msgstr "การคอนฟิก Internet"

#: ../../printerdrake.pm_.c:2004
#, c-format
msgid ""
"Printer %s: %s %s\n"
"What do you want to modify on this printer?"
msgstr ""

#: ../../printerdrake.pm_.c:2012
msgid "Do it!"
msgstr ""

#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
#, fuzzy
msgid "Printer connection type"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
#, fuzzy
msgid "Printer name, description, location"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
msgid "Printer manufacturer, model, driver"
msgstr ""

#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
msgid "Printer manufacturer, model"
msgstr ""

#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
msgid "Set this printer as the default"
msgstr ""

#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
#, fuzzy
msgid "Print test pages"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
msgid "Know how to print with this printer"
msgstr ""

#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
#, fuzzy
msgid "Remove printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: ../../printerdrake.pm_.c:2071
#, fuzzy, c-format
msgid "Removing old printer \"%s\" ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../printerdrake.pm_.c:2096
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: ../../printerdrake.pm_.c:2103
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: ../../printerdrake.pm_.c:2105
#, fuzzy, c-format
msgid "Removing printer \"%s\" ..."
msgstr "อ่าน CUPS drivers database..."

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
#, fuzzy
msgid "Proxy configuration"
msgstr "การคอนฟิก Proxies"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr ""

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
#, fuzzy
msgid "port"
msgstr "Port"

#: ../../proxy.pm_.c:44
#, fuzzy
msgid "Url should begin with 'http:'"
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
#, fuzzy
msgid "The port part should be numeric"
msgstr "Port number ควรเป็นตัวเลข"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""

#: ../../proxy.pm_.c:65
#, fuzzy
msgid "Url should begin with 'ftp:'"
msgstr "ค่าของ Proxy ควรจะเป็น ftp://..."

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""

#: ../../proxy.pm_.c:80
#, fuzzy
msgid "login"
msgstr "Autologin"

#: ../../proxy.pm_.c:82
#, fuzzy
msgid "password"
msgstr "รหัสผ่าน"

#: ../../proxy.pm_.c:84
#, fuzzy
msgid "re-type password"
msgstr "ไม่มีรหัสผ่าน"

#: ../../proxy.pm_.c:88
#, fuzzy
msgid "The passwords don't match. Try again!"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"

#: ../../raid.pm_.c:111
#, c-format
msgid "Can't write file %s"
msgstr "ไม่สามารถบันทึกไฟล์ %s"

#: ../../raid.pm_.c:136
msgid "mkraid failed"
msgstr "mkraid failed"

#: ../../raid.pm_.c:136
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid failed (maybe raidtools are missing?)"

#: ../../raid.pm_.c:152
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"

#: ../../services.pm_.c:15
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: ../../services.pm_.c:16
msgid "Anacron a periodic command scheduler."
msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"

#: ../../services.pm_.c:17
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd คือโปรแกรมดูแลสถานะของ battery \n"
"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"

#: ../../services.pm_.c:19
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""

#: ../../services.pm_.c:21
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"

#: ../../services.pm_.c:24
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
"ด้วย"

#: ../../services.pm_.c:27
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: ../../services.pm_.c:29
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr "Apache คือ World Wide Web server"

#: ../../services.pm_.c:31
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
"เมื่อมีความต้องการเกิดขึ้น  ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
"ftp rsh และ rlogin  การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
"ผิดชอบอยู่ไม่ทำงาน"

#: ../../services.pm_.c:35
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: ../../services.pm_.c:37
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"แพกเกจนี้จะเรียกใช้ keyboard map ตามที่ระบุอยู่ใน \n"
"/etc/sysconfig/keyboard  ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"

#: ../../services.pm_.c:40
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: ../../services.pm_.c:42
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: ../../services.pm_.c:43
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: ../../services.pm_.c:45
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"

#: ../../services.pm_.c:47
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: ../../services.pm_.c:49
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
"host names เป็น IP addresses."

#: ../../services.pm_.c:51
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."

#: ../../services.pm_.c:53
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
"เริ่มทำงานตอน boot"

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"

#: ../../services.pm_.c:58
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server "

#: ../../services.pm_.c:60
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: ../../services.pm_.c:62
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: ../../services.pm_.c:63
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"

#: ../../services.pm_.c:66
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"

#: ../../services.pm_.c:69
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
"ไปอีกเครื่องหนึ่ง"

#: ../../services.pm_.c:71
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""

#: ../../services.pm_.c:73
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""

#: ../../services.pm_.c:75
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: ../../services.pm_.c:78
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: ../../services.pm_.c:80
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: ../../services.pm_.c:82
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""

#: ../../services.pm_.c:84
#, fuzzy
msgid "Launch the sound system on your machine"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: ../../services.pm_.c:85
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: ../../services.pm_.c:87
msgid "Load the drivers for your usb devices."
msgstr ""

#: ../../services.pm_.c:88
#, fuzzy
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"

#: ../../services.pm_.c:114 ../../services.pm_.c:156
msgid "Choose which services should be automatically started at boot time"
msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"

#: ../../services.pm_.c:126
#, fuzzy
msgid "Printing"
msgstr "เครื่องพิมพ์"

#: ../../services.pm_.c:127
msgid "Internet"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: ../../services.pm_.c:130
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:132
#, fuzzy
msgid "System"
msgstr "System mode"

#: ../../services.pm_.c:137
#, fuzzy
msgid "Remote Administration"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: ../../services.pm_.c:145
#, fuzzy
msgid "Database Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: ../../services.pm_.c:174
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:186
#, fuzzy
msgid "Services"
msgstr "อุปกรณ์"

#: ../../services.pm_.c:198
msgid "running"
msgstr "กำลังทำงาน"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "หยุด"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr ""

#: ../../services.pm_.c:217
msgid ""
"No additionnal information\n"
"about this service, sorry."
msgstr ""
"ไม่มีข้อมูลเพิ่มเติม\n"
"สำหรับการบริการนี้ ขอโทษครับ"

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "ขณะ boot"

#: ../../standalone.pm_.c:25
#, fuzzy
msgid "Installing packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: ../../standalone/diskdrake_.c:63
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"โปรแกรมไม่สามารถอ่านตารางพาร์ติชั่นได้ ข้อมูลในตารางไม่ถูกต้อง :(\n"
"โปรแกรมจะพยายามเคลียร์พาร์ติชั่นที่มีปัญหาให้"

#: ../../standalone/drakautoinst_.c:44
#, fuzzy
msgid "Error!"
msgstr "ผิดพลาด"

#: ../../standalone/drakautoinst_.c:45
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: ../../standalone/drakautoinst_.c:47
#, fuzzy
msgid "Auto Install Configurator"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: ../../standalone/drakautoinst_.c:48
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst_.c:70
#, fuzzy
msgid "Automatic Steps Configuration"
msgstr "Boot Style Configuration"

#: ../../standalone/drakautoinst_.c:71
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
msgid "Congratulations!"
msgstr "ขอแสดงความยินดี"

#: ../../standalone/drakautoinst_.c:113
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
msgid "Internet Connection Sharing"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: ../../standalone/drakgw_.c:119
msgid "Internet Connection Sharing currently enabled"
msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"

#: ../../standalone/drakgw_.c:120
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: ../../standalone/drakgw_.c:124
msgid "disable"
msgstr "disable"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "dismiss"
msgstr "เลิก"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "reconfigure"
msgstr "คอนฟิกใหม่"

#: ../../standalone/drakgw_.c:127
msgid "Disabling servers..."
msgstr "ยกเลิกการทำงานของ server"

#: ../../standalone/drakgw_.c:135
msgid "Internet connection sharing is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: ../../standalone/drakgw_.c:144
msgid "Internet Connection Sharing currently disabled"
msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"

#: ../../standalone/drakgw_.c:145
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: ../../standalone/drakgw_.c:149
msgid "enable"
msgstr "enable"

#: ../../standalone/drakgw_.c:156
msgid "Enabling servers..."
msgstr "เริ่มทำงาน server"

#: ../../standalone/drakgw_.c:161
msgid "Internet connection sharing is now enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: ../../standalone/drakgw_.c:182
#, fuzzy
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
"\n"
"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"

#: ../../standalone/drakgw_.c:208
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interface %s (using module %s)"

#: ../../standalone/drakgw_.c:209
#, c-format
msgid "Interface %s"
msgstr "Interface %s"

#: ../../standalone/drakgw_.c:217
msgid "No network adapter on your system!"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: ../../standalone/drakgw_.c:218
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"

#: ../../standalone/drakgw_.c:224
msgid "Network interface"
msgstr "Network interface"

#: ../../standalone/drakgw_.c:225
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
"\n"
"%s\n"
"\n"
"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"

#: ../../standalone/drakgw_.c:234
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"

#: ../../standalone/drakgw_.c:243
msgid ""
"Warning, the network adapter is already configured. I will reconfigure it."
msgstr "ระวัง network adapter ได้เคยมีการปรับแต่งเรียบร้อยแล้ว แต่ผมจะทำการปรับแต่งใหม่"

#: ../../standalone/drakgw_.c:254
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"

#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
msgid "Firewalling configuration detected!"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""

#: ../../standalone/drakgw_.c:277
msgid "Configuring..."
msgstr "กำลังทำการคอนฟิก"

#: ../../standalone/drakgw_.c:278
msgid "Configuring scripts, installing software, starting servers..."
msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."

#: ../../standalone/drakgw_.c:311
#, c-format
msgid "Problems installing package %s"
msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"

#: ../../standalone/drakgw_.c:600
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"

#: ../../standalone/drakgw_.c:617
msgid "The setup has already been done, but it's currently disabled."
msgstr ""

#: ../../standalone/drakgw_.c:618
msgid "The setup has already been done, and it's currently enabled."
msgstr "การปรับแต่งเรียบร้อยแล้วและตอนนี้ก็ได้ทำงานแล้ว"

#: ../../standalone/drakgw_.c:619
msgid "No Internet Connection Sharing has ever been configured."
msgstr "ไม่มีการเชื่อมต่อกับ Internet แบบ sharing"

#: ../../standalone/drakgw_.c:624
#, fuzzy
msgid "Internet connection sharing configuration"
msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"

#: ../../standalone/drakgw_.c:631
#, fuzzy, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
"\n"
"%s\n"
"\n"
"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"

#: ../../standalone/draknet_.c:79
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"

#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
msgid "Profile: "
msgstr "Profile: "

#: ../../standalone/draknet_.c:94
msgid "Del profile..."
msgstr "ลบ profile..."

#: ../../standalone/draknet_.c:100
msgid "Profile to delete:"
msgstr "profile ที่ต้องการลบ:"

#: ../../standalone/draknet_.c:128
msgid "New profile..."
msgstr "profile ใหม่..."

#: ../../standalone/draknet_.c:134
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/draknet_.c:160
msgid "Hostname: "
msgstr "ชื่อโฮสต์:"

#: ../../standalone/draknet_.c:167
msgid "Internet access"
msgstr "การติดต่อ internet"

#: ../../standalone/draknet_.c:180
msgid "Type:"
msgstr "ประเภท: "

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Gateway:"
msgstr "เกตเวย์:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Interface:"
msgstr "Interface:"

#: ../../standalone/draknet_.c:192
msgid "Status:"
msgstr "สถานะ:"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Connected"
msgstr "เชื่อมต่ออยู่"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Not connected"
msgstr "ไม่เชื่อมต่อ"

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Connect..."
msgstr "ติดต่อ"

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Disconnect..."
msgstr "ยกเลิกติดต่อ..."

#: ../../standalone/draknet_.c:215
#, fuzzy
msgid "Starting your connection..."
msgstr "ทดสอบ connection..."

#: ../../standalone/draknet_.c:223
msgid "Closing your connection..."
msgstr "จบการติดต่อ..."

#: ../../standalone/draknet_.c:228
msgid ""
"The connection is not closed.\n"
"Try to do it manually by running\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"in root."
msgstr ""

#: ../../standalone/draknet_.c:231
msgid "The system is now disconnected."
msgstr "เครื่องคุณได้เลิกการติดต่อแล้ว"

#: ../../standalone/draknet_.c:243
msgid "Configure Internet Access..."
msgstr "ปรับแต่งการติดต่อเข้า internet"

#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
msgid "LAN configuration"
msgstr "การปรับแต่ง LAN"

#: ../../standalone/draknet_.c:255
msgid "Driver"
msgstr "Driver"

#: ../../standalone/draknet_.c:255
msgid "Interface"
msgstr "Interface"

#: ../../standalone/draknet_.c:255
msgid "Protocol"
msgstr "Protocol"

#: ../../standalone/draknet_.c:255
#, fuzzy
msgid "State"
msgstr "สถานะ:"

#: ../../standalone/draknet_.c:267
msgid "Configure Local Area Network..."
msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."

#: ../../standalone/draknet_.c:279
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/draknet_.c:306
msgid "Apply"
msgstr "มีผลทันที"

#: ../../standalone/draknet_.c:325
msgid "Please Wait... Applying the configuration"
msgstr "กรุณารอสักครู่ ..."

#: ../../standalone/draknet_.c:428
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/draknet_.c:450
msgid "LAN Configuration"
msgstr "การปรับแต่ง LAN"

#: ../../standalone/draknet_.c:457
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/draknet_.c:463
msgid "Boot Protocol"
msgstr "Boot Protocol"

#: ../../standalone/draknet_.c:464
msgid "Started on boot"
msgstr "เริ่มทำงานตอน boot"

#: ../../standalone/draknet_.c:465
msgid "DHCP client"
msgstr "DHCP client"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "activate now"
msgstr "แอ็คทีฟ"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "desactivate now"
msgstr "แอ็คทีฟ"

#: ../../standalone/draknet_.c:538
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/draknet_.c:562
msgid "Internet connection configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: ../../standalone/draknet_.c:566
msgid "Internet Connection Configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: ../../standalone/draknet_.c:575
msgid "Connection type: "
msgstr "ชนิดการเชื่อมต่อ"

#: ../../standalone/draknet_.c:581
msgid "Parameters"
msgstr "Parameters"

#: ../../standalone/draknet_.c:608
msgid "Ethernet Card"
msgstr "Ethernet Card"

#: ../../standalone/draknet_.c:609
msgid "DHCP Client"
msgstr "DHCP Client"

#: ../../standalone/draksec_.c:21
msgid "Welcome To Crackers"
msgstr "Welcome To Crackers"

#: ../../standalone/draksec_.c:22
msgid "Poor"
msgstr "ต่ำกว่ามาตรฐาน"

#: ../../standalone/draksec_.c:26
msgid "Paranoid"
msgstr "Paranoid"

#: ../../standalone/draksec_.c:29
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: ../../standalone/draksec_.c:32
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: ../../standalone/draksec_.c:33
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""

#: ../../standalone/draksec_.c:35
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""

#: ../../standalone/draksec_.c:37
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""

#: ../../standalone/draksec_.c:40
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""

#: ../../standalone/draksec_.c:65
#, fuzzy
msgid "Security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../../standalone/draksec_.c:67
#, fuzzy
msgid "Use libsafe for servers"
msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"

#: ../../standalone/draksec_.c:68
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: ../../standalone/draksec_.c:72
msgid "Setting security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../../standalone/drakxconf_.c:47
msgid "Control Center"
msgstr "Control Center"

#: ../../standalone/drakxconf_.c:48
msgid "Choose the tool you want to use"
msgstr "เลือกเครื่องมือที่คุณต้องการใช้"

#: ../../standalone/keyboarddrake_.c:16
msgid "usage: keyboarddrake [--expert] [keyboard]\n"
msgstr "วิธีการใช้: keyboarddrake [--expert] [keyboard]\n"

#: ../../standalone/keyboarddrake_.c:36
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: ../../standalone/livedrake_.c:23
msgid "Change Cd-Rom"
msgstr "เปลี่ยน CD-ROM"

#: ../../standalone/livedrake_.c:24
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr "ไม่สามารถเริ่ม live upgrade !!!\n"

#: ../../standalone/mousedrake_.c:58
msgid "no serial_usb found\n"
msgstr "ไม่พบ serial_usb\n"

#: ../../standalone/mousedrake_.c:62
msgid "Emulate third button?"
msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"

#: ../../standalone/tinyfirewall_.c:29
msgid "Firewalling Configuration"
msgstr "การปรับแต่ง firewall"

#: ../../standalone/tinyfirewall_.c:42
msgid "Firewalling configuration"
msgstr "การปรับแต่ง firewall"

#: ../../standalone/tinyfirewall_.c:77
msgid ""
"Firewalling\n"
"\n"
"You already have set up a firewall.\n"
"Click on Configure to change or remove the firewall"
msgstr ""

#: ../../standalone/tinyfirewall_.c:81
msgid ""
"Firewalling\n"
"\n"
"Click on Configure to set up a standard firewall"
msgstr ""

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "เลือกภาษาที่คุณใช้"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "เลือกชุดการติดตั้ง"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "คอนฟิกเม้าส์"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "เลือกคีย์บอร์ด"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "ระบบความป้องกัน"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "เซ็ตอัพระบบไฟล์"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "เลือกแพ็คเก็จ"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "ติดตั้งระบบ"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "เพิ่มผู้ใช้"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "ปรับแต่งการบริการต่างๆ"

#: ../../steps.pm_.c:30
msgid "Create a bootdisk"
msgstr "สร้างแผ่นบูต"

#: ../../steps.pm_.c:32
msgid "Install bootloader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "คอนฟิกระบบ X"

#: ../../steps.pm_.c:34
msgid "Exit install"
msgstr "ออกจากการติดตั้ง"

#: ../../tinyfirewall.pm_.c:9
msgid ""
"tinyfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: ../../tinyfirewall.pm_.c:14
msgid ""
"We'll now ask you questions about which services you'd like to allow\n"
"the Internet to connect to.  Please think carefully about these\n"
"questions, as your computer's security is important.\n"
"\n"
"Please, if you're not currently using one of these services, firewall\n"
"it off.  You can change this configuration anytime you like by\n"
"re-running this application!"
msgstr ""

#: ../../tinyfirewall.pm_.c:21
msgid ""
"Are you running a web server on this machine that you need the whole\n"
"Internet to see? If you are running a webserver that only needs to be\n"
"accessed by this machine, you can safely answer NO here.\n"
"\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:26
msgid ""
"Are you running a name server on this machine? If you didn't set one\n"
"up to give away IP and zone information to the whole Internet, please\n"
"answer no.\n"
"\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:31
msgid ""
"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
"is a telnet-replacement that you might use to login. If you're using\n"
"telnet now, you should definitely switch to ssh. telnet is not\n"
"encrypted -- so some attackers can steal your password if you use\n"
"it. ssh is encrypted and doesn't allow for this eavesdropping."
msgstr ""

#: ../../tinyfirewall.pm_.c:36
msgid ""
"Do you want to allow incoming telnet connections?\n"
"This is horribly unsafe, as we explained in the previous screen. We\n"
"strongly recommend answering No here and using ssh in place of\n"
"telnet.\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:41
msgid ""
"Are you running an FTP server here that you need accessible to the\n"
"Internet? If you are, we strongly recommend that you only use it for\n"
"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
"attackers, since FTP also uses no encryption for transferring passwords.\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:46
msgid ""
"Are you running a mail server here? If you're sending you \n"
"messages through pine, mutt or any other text-based mail client,\n"
"you probably are.  Otherwise, you should firewall this off.\n"
"\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:51
msgid ""
"Are you running a POP or IMAP server here? This would\n"
"be used to host non-web-based mail accounts for people via \n"
"this machine.\n"
"\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:56
msgid ""
"You appear to be running a 2.2 kernel.  If your network IP\n"
"is automatically set by a computer in your home or office \n"
"(dynamically assigned), we need to allow for this.  Is\n"
"this the case?\n"
msgstr ""

#: ../../tinyfirewall.pm_.c:61
msgid ""
"Is your computer getting time syncronized to another computer?\n"
"Mostly, this is used by medium-large Unix/Linux organizations\n"
"to synchronize time for logging and such.  If you're not part\n"
"of a larger office and haven't heard of this, you probably \n"
"aren't."
msgstr ""

#: ../../tinyfirewall.pm_.c:66
msgid ""
"Configuration complete.  May we write these changes to disk?\n"
"\n"
"\n"
"\n"
msgstr ""
"การปรับแต่งเรียบร้อย ให้บันทึกข้อมูลได้ใหมครับ\n"
"\n"
"\n"
"\n"

#: ../../tinyfirewall.pm_.c:82
#, fuzzy, c-format
msgid "Can't open %s: %s\n"
msgstr "Adapter %s: %s"

#: ../../tinyfirewall.pm_.c:84
#, fuzzy, c-format
msgid "Can't open %s for writing: %s\n"
msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer (client)"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Office"
msgstr "ดี"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Gnome Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "เครื่องมือสำหรับ Palm Pilot หรือ Visor"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr ""

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "KDE Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia - Video"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr ""

#: ../../share/compssUsers:999
msgid "Database"
msgstr ""

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "เครืองมือที่ช่วยในการปรับแต่งเครื่องชองคุณให้ง่ายขึ้น"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia - Sound"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
msgid "Utilities"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Documentation"
msgstr "ตำแหน่ง"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet station"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia station"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "การปรับแต่ง LAN"

#: ../../share/compssUsers:999
#, fuzzy
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Graphical Desktops อื่นๆ"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "การทำงานแบบกราฟฟิก"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr ""

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "เครื่องมือในการทำ CD"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr ""

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr ""

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer server"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Game station"
msgstr "Workstation ที่ทำงาน"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia - Graphics"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"

#: ../../share/compssUsers:999
msgid "Archiving, emulators, monitoring"
msgstr ""

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "การเงินส่วนตัว"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Clients for different protocols including ssh"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet gateway"
msgstr "การติดต่อ internet"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr ""

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Graphical Desktops อื่นๆ"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr ""

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "โปรแกรมที่ช่วยจัดการเรื่องการเงิน เช่น gnucash"

#: ../../share/compssUsers:999
msgid "Games"
msgstr ""

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr ""

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedia - เขียน CD "

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Workstation ทางวิทยาศาสตร์"

#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
#~ msgstr "ไม่สามารถเปิด /etc/sysconfig/autologin มาอ่านได้: %s"

#~ msgid "Do you want to restart the network"
#~ msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#~ msgid ""
#~ "\n"
#~ "Do you agree?"
#~ msgstr ""
#~ "\n"
#~ "คุณยอมรับหรือไม่"

#~ msgid "I'm about to restart the network device:\n"
#~ msgstr "ผมกำลังจะเลิ่มทำงาน Network Device ใหม่:\n"

#~ msgid "I'm about to restart the network device %s. Do you agree?"
#~ msgstr "ผมกำลังจะเริ่มทำงาน Network Device %s ใหม่ ตกลงใหม?"

#, fuzzy
#~ msgid ""
#~ "The following printers are configured.\n"
#~ "You can add some more or modify the existing ones."
#~ msgstr ""
#~ "ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
#~ "คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#, fuzzy
#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
#~ msgstr "ชนิดการเชื่อมต่อ"

#, fuzzy
#~ msgid "Could not set \"%s\" as the default printer!"
#~ msgstr "เลือกผู้ใช้ default"

#, fuzzy
#~ msgid "Test the mouse here."
#~ msgstr "กรุณาทดสอบเม้าส์"

#~ msgid ""
#~ "Please choose your preferred language for installation and system usage."
#~ msgstr "กรุณาเลือกภาษาที่ต้องการในการติดตั้งและใช้งานของระบบ"

#~ msgid ""
#~ "You need to accept the terms of the above license to continue "
#~ "installation.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Accept\" if you agree with its terms.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
#~ "will end without modifying your current\n"
#~ "configuration."
#~ msgstr ""
#~ "You need to accept the terms of the above license to continue "
#~ "installation.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Accept\" if you agree with its terms.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
#~ "will end without modifying your current\n"
#~ "configuration."

#~ msgid "Choose the layout corresponding to your keyboard from the list above"
#~ msgstr "เลือกรูปแบบของคีย์บอร์ดตามรายการข้างต้น"

#~ msgid ""
#~ "If you wish other languages (than the one you choose at\n"
#~ "beginning of installation) will be available after installation, please "
#~ "chose\n"
#~ "them in list above. If you want select all, you just need to select \"All"
#~ "\"."
#~ msgstr ""
#~ "If you wish other languages (than the one you choose at\n"
#~ "beginning of installation) will be available after installation, please "
#~ "chose\n"
#~ "them in list above. If you want select all, you just need to select \"All"
#~ "\"."

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!"
#~ msgstr ""
#~ "เลือก:\n"
#~ "\n"
#~ " - แบบปรับแก้ได้: ข้อเลือกที่แก้ไขได้X ถ้าคุณคุ้นเคยกับลีนุกซ์ดีอยู่แล้ว\n"
#~ "   คุณอาจต้องการเลือกการติดตั้งระบบระหว่างระบบทั่วไป, ระบบสำหรับพัฒนาซอฟท์แวร์\n"
#~ "   หรือแบบเซิร์ฟเวอร์ ให้เลือก \"ปกติ\" สำหรับติดตั้งตามปกติลงในคอมพิวเตอร์\n"
#~ "   คุณอาจเลือก \"พัฒนาซอฟท์แวร์\" ถ้าคุณต้องการให้คอมพิวเตอร์ของคุณสำหรับการทำงาน\n"
#~ "   แบบการพัฒนาซอฟท์แวร์ หรือเลือก \"เซิรฟ์เวอร์\" ถ้าคุณต้องการ\n"
#~ "   ติดตั้งซอฟท์แวร์สำหรับเซิร์ฟเวอร์ทั่วๆไป (เช่นเมลล์ การพิมพ์...)\n"
#~ "\n"
#~ "\n"
#~ " - แบบผู้เชี่ยวชา: (สำหรับผู้ชำนาญแล้ว) ถ้าคุณใช้งาน GNU/Linux ได้อย่างคล่องแคล่ว\n"
#~ "   และต้องการติดตั้งแบบเลือกด้วยตนเอง การติดตั้งแบบนี้จะเหมาะสมที่สุด\n"
#~ "   คุณยังสามารถจะเลือกใช้งานระบบที่คุณติดตั้งแบบ \"แบบปรับแก้ได้\"ได้ด้วย"

#~ msgid ""
#~ "You must now define your machine usage. Choices are:\n"
#~ "\n"
#~ "* Workstation: this the ideal choice if you intend to use your machine "
#~ "primarily for everyday use, at office or\n"
#~ "  at home.\n"
#~ "\n"
#~ "\n"
#~ "* Development: if you intend to use your machine primarily for software "
#~ "development, it is the good choice. You\n"
#~ "  will then have a complete collection of software installed in order to "
#~ "compile, debug and format source code,\n"
#~ "  or create software packages.\n"
#~ "\n"
#~ "\n"
#~ "* Server: if you intend to use this machine as a server, it is the good "
#~ "choice. Either a file server (NFS or\n"
#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
#~ "authentication server (NIS), a database\n"
#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
#~ "etc.) to be installed."
#~ msgstr ""
#~ "คุณต้องเลือกการใช้งานของเครื่องคุณ ทางเลือกคือ:\n"
#~ "\n"
#~ "* Workstation\n"
#~ "* Development\n"
#~ "* Server"

#~ msgid ""
#~ "You can now enter the root password for your Mandrake Linux system.\n"
#~ "The password must be entered twice to verify that both password entries "
#~ "are identical.\n"
#~ "\n"
#~ "\n"
#~ "Root is the system's administrator and is the only user allowed to modify "
#~ "the\n"
#~ "system configuration. Therefore, choose this password carefully. \n"
#~ "Unauthorized use of the root account can be extemely dangerous to the "
#~ "integrity\n"
#~ "of the system, its data and other system connected to it.\n"
#~ "\n"
#~ "\n"
#~ "The password should be a mixture of alphanumeric characters and at least "
#~ "8\n"
#~ "characters long. It should never be written down.\n"
#~ "\n"
#~ "\n"
#~ "Do not make the password too long or complicated, though: you must be "
#~ "able to\n"
#~ "remember it without too much effort."
#~ msgstr ""
#~ "ตอนนี้คุณสามารถป้อนรหัสผ่านของรูท (ผู้ดูแลระบบ) ซึ่งคุณจะต้อง\n"
#~ "ป้อนรหัสผ่านสองครั้งเพื่อยืนยันว่าคุณได้ป้อนรหัสผ่านตรงกัน\n"
#~ "\n"
#~ "\n"
#~ "รูท เป็นผู้ดูแลระบบ ซึ่งเป็นผู้ใช้งานเพียงคนเดียวที่ได้รับอนุญาตให้\n"
#~ "ทำการการแก้ไขคอนฟิกของระบบได้ ดังนั้นคุณจำเป็นจะต้องเลือก\n"
#~ "รหัสผ่านอย่างระมัดระวัง การใช้งานชื่อบัญชีของรูทโดยไม่ได้รับอนุญาต\n"
#~ "อาจก่อให้เกิดความเสียหายอย่างร้ายแรงกับความถูกต้องของข้อมูลของระบบ\n"
#~ "รวมทั้งเครื่องคอมพิวเตอร์อื่นที่ต่ออยู่ด้วยได้ การกำหนดรหัสผ่านจะต้องทำการ\n"
#~ "ผสมผสานกันระหว่างตัวอักษรและตัวเลข และให้มีความยาวอย่างน้อย 8 ตัวอักษร\n"
#~ "คุณ *ไม่ควร* จดรหัสผ่านของคุณไว้ อย่ากำหนดให้รหัสผ่านยาวหรือซับซ้อนเกินไป\n"
#~ "และอย่ากำหนดให้รหัสผ่านยากและซับซ้อนเกินกว่าคุณจะจำได้ด้วย"

#~ msgid ""
#~ "You may now create one or more \"regular\" user account(s), as\n"
#~ "opposed to the \"privileged\" user account, root. You can create\n"
#~ "one or more account(s) for each person you want to allow to use\n"
#~ "the computer. Note that each user account will have its own\n"
#~ "preferences (graphical environment, program settings, etc.)\n"
#~ "and its own \"home directory\", in which these preferences are\n"
#~ "stored.\n"
#~ "\n"
#~ "\n"
#~ "First of all, create an account for yourself! Even if you will be the "
#~ "only user\n"
#~ "of the machine, you may NOT connect as root for daily use of the system: "
#~ "it's a\n"
#~ "very high security risk. Making the system unusable is very often a typo "
#~ "away.\n"
#~ "\n"
#~ "\n"
#~ "Therefore, you should connect to the system using the user account\n"
#~ "you will have created here, and login as root only for administration\n"
#~ "and maintenance purposes."
#~ msgstr ""
#~ "ตอนนี้คุณสามารถสร้างชื่อบัญชีผู้ใช้แบบ \"regular\" (ทั่วไป) ได้แล้ว\n"
#~ "ซึ่งบัญชีแบบทั่วไปนี้คุณสามารถสร้างได้มากกว่าหนึ่งชื่อ (รูทจะมีได้ชื่อเดียว)\n"
#~ "และชื่อบัญชีแต่ละชื่อจะกำหนดไว้เฉพาะผู้ใช้แต่ละคนที่ใช้งานคอมพิวเตอร์ ซึ่ง\n"
#~ "แต่ละคนก็จะมีข้อกำหนดของตนเอง (สภาพแวดล้อมแบบกราฟฟิก, การเซ็ตโปรแกรมเป็นต้น)\n"
#~ "และมี \"home directory\" (ไดเร็กทอรีบ้าน) เป็นของตนเองด้วยซึ่งไดเร็กทอรีบ้าน\n"
#~ "จะเป็นที่เก็บข้อกำหนดเหล่านี้\n"
#~ "\n"
#~ "\n"
#~ "ข้อแรกสุด คุณจะต้องสร้างชื่อบัญชีสำหรับตนเอง ถึงแม้ว่าคุณจะเป็นเพียงผู้ใช้คน\n"
#~ "เดียวในระบบก็ตาม เนื่องจากคุณไม่สามารถเข้าติดต่อระบบจากเครือข่ายผ่านทาง\n"
#~ "ชื่อผู้ใช้ root ได้ (เนื่องจากระบบรักษาความปลอดภัย) ซึ่งหากไม่สามารถเข้าใช้\n"
#~ "งานระบบได้ก็จะไม่สามารถใช้งานใดๆได้\n"
#~ "\n"
#~ "\n"
#~ "ดังนั้นคุณควรจะต้องติดต่อเข้าใช้ระบบผ่านทางเครือข่ายโดยทะเบียนของผู้ใช้ปกติ\n"
#~ "ซึ่งคุณได้สร้างไว้ในขั้นตอนนี้ และเข้าล็อกอินใช้งานในฐานะรูทเฉพาะเมื่อมีจุด\n"
#~ "ประสงค์ในการบริหารระบบ และทำการซ่อมบำรุงเท่านั้น"

#~ msgid ""
#~ "Now it's time to configure the X Window System, which is the\n"
#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
#~ "you must configure your video card and monitor. Most of these\n"
#~ "steps are automated, though, therefore your work may only consist\n"
#~ "of verifying what has been done and accept the settings :)\n"
#~ "\n"
#~ "\n"
#~ "When the configuration is over, X will be started (unless you\n"
#~ "ask DrakX not to) so that you can check and see if the\n"
#~ "settings suit you. If they don't, you can come back and\n"
#~ "change them, as many times as necessary."
#~ msgstr ""
#~ "ตอนนี้ได้เวลาที่จะคอนฟิกระบบ X วินโดวส์แล้ว ซึ่งระบบ X จะเป็นแกนกลางของ\n"
#~ "ระบบ GUI (Graphical User Interface) ของลีนุกซ์ ในการคอนฟิกคุณจะต้อง\n"
#~ "ทำการคอนฟิกวิดีโอการ์ดและจอภาพ ซึ่งขั้นตอนส่วนใหญ่จะเป็นแบบอัตโนมัติทั้งหมด\n"
#~ "ดังนั้นคุณก็เพียงแค่ตรวจสอบความถูกต้อง และรับทราบการเซ็ตระบบเท่านั้นเอง :)\n"
#~ "\n"
#~ "\n"
#~ "หลังจากสิ้นสุดการคอนฟิก X ก็จะเริ่มต้นทำงาน (ยกเว้นคุณไม่สั่งให้ DrakX ทำ)\n"
#~ "เพื่อให้คุณสามารถตรวจและทราบได้ว่าการเซ็ตนั้นสามารถใช้งานได้ หากไม่สามารถ\n"
#~ "ทำงานได้ คุณสามารถกลับไปแก้ไขการเซ็ตอัพได้ตลอดเวลา"

#~ msgid "Czech (Programmers)"
#~ msgstr "Czech (Programmers)"

#~ msgid "Slovakian (Programmers)"
#~ msgstr "Slovakian (Programmers)"

#~ msgid "Name of the profile to create:"
#~ msgstr "ชื่อของ profile ที่จะสร้าง:"

#~ msgid "Write /etc/fstab"
#~ msgstr "เขียนลงใน /etc/fstab"

#~ msgid "Restore from file"
#~ msgstr "เรียกคืนจากไฟล์"

#~ msgid "Save in file"
#~ msgstr "บันทึกลงไฟล์"

#~ msgid "Restore from floppy"
#~ msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#~ msgid "Format all"
#~ msgstr "ฟอร์แมตทั้งหมด"

#~ msgid "After formatting all partitions,"
#~ msgstr "หลังจากฟอร์แมตทุกพาร์ติชั่น"

#~ msgid "all data on these partitions will be lost"
#~ msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นจะถูกลบทิ้ง"

#~ msgid "Reload"
#~ msgstr "เรียกคืนอีกครั้ง"

#~ msgid ""
#~ "Do you want to generate an auto install floppy for linux replication?"
#~ msgstr "คุณต้องการจะทำแผ่น floppy เพื่อการติดตั้งแบบออโต้หรือไม่?"

#~ msgid "ADSL configuration"
#~ msgstr "การคอนฟิก ADSL"

#~ msgid ""
#~ "With a remote CUPS server, you do not have to configure\n"
#~ "any printer here; printers will be automatically detected\n"
#~ "unless you have a server on a different network; in the\n"
#~ "latter case, you have to give the CUPS server IP address\n"
#~ "and optionally the port number."
#~ msgstr ""
#~ "เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
#~ "ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
#~ "ยกเว้นคุณมี server บน network อื่น กรณีนั้นคุณต้อง\n"
#~ "ระบุ IP ADDRESS และ port number ให้กับ CUPS server"

#, fuzzy
#~ msgid "Remote queue name missing!"
#~ msgstr "ชื่อคิวรีโมท"

#, fuzzy
#~ msgid "Command line"
#~ msgstr "ชื่อโดเมน"

#, fuzzy
#~ msgid "Modify printer"
#~ msgstr "ไม่มีเครื่องพิมพ์"

#, fuzzy
#~ msgid "start it"
#~ msgstr "จำเพาะ"

#, fuzzy
#~ msgid "Network Monitoring"
#~ msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#, fuzzy
#~ msgid "Profile "
#~ msgstr "Profile: "

#, fuzzy
#~ msgid "Connection Time: "
#~ msgstr "ชนิดการเชื่อมต่อ"

#, fuzzy
#~ msgid "Connecting to Internet "
#~ msgstr "เชื่อมต่อ Internet"

#, fuzzy
#~ msgid "Disconnecting from Internet "
#~ msgstr "จบการเชื่อมต่อ Internet "

#, fuzzy
#~ msgid "Disconnection from Internet failed."
#~ msgstr "จบการเชื่อมต่อ Internet "

#, fuzzy
#~ msgid "Disconnection from Internet complete."
#~ msgstr "จบการเชื่อมต่อ Internet "

#, fuzzy
#~ msgid "Connection complete."
#~ msgstr "ชื่อการเชื่อมต่อ"

#, fuzzy
#~ msgid "Color configuration"
#~ msgstr "การคอนฟิก"

#, fuzzy
#~ msgid "Connect"
#~ msgstr "เชื่อมต่ออยู่"

#, fuzzy
#~ msgid "Disconnect"
#~ msgstr "ยกเลิกติดต่อ..."

#~ msgid "/File/_New"
#~ msgstr "/ไฟล์/_ใหม่"

#~ msgid "<control>N"
#~ msgstr "<control>N"

#~ msgid "/File/_Open"
#~ msgstr "/ไฟล์/_เปิด"

#~ msgid "<control>O"
#~ msgstr "<control>O"

#~ msgid "/File/_Save"
#~ msgstr "/ไฟล์/_บันทึก"

#~ msgid "<control>S"
#~ msgstr "<control>S"

#~ msgid "/File/Save _As"
#~ msgstr "/ไฟล์/_บันทึกเป็น"

#~ msgid "/File/-"
#~ msgstr "/ไฟล์/-"

#~ msgid "/_Help"
#~ msgstr "/_ช่วยเหลือ"

#~ msgid "/Help/_About..."
#~ msgstr "/ช่วยเหลือ/_About..."

#~ msgid "Europe"
#~ msgstr "ยุโรป"

#~ msgid "NetWare"
#~ msgstr "เน็ตแวร์"

#~ msgid "Remove queue"
#~ msgstr "ลบคิว"

#~ msgid "Unrecognized config file"
#~ msgstr "Unrecognized config file"

#, fuzzy
#~ msgid "Disable network"
#~ msgstr "ยกเลิกทำงาน"

#, fuzzy
#~ msgid "Enable network"
#~ msgstr "เริ่มทำงาน"

#~ msgid "DSL (or ADSL) connection"
#~ msgstr "การติดต่อแบบ DSL หรือ ADSL"

#~ msgid "You can specify directly the URI to access the printer with CUPS."
#~ msgstr "You can specify directly the URI to access the printer with CUPS."

#~ msgid "Yes, print ASCII test page"
#~ msgstr "ใช่ ให้พิมพ์กระดาษทดสอบแบบ ASCII"

#~ msgid "Yes, print PostScript test page"
#~ msgstr "ใช่ ให้พิมพ์กระดาษทดสอบแบบโพสต์สคริปต์"

#~ msgid "Paper Size"
#~ msgstr "ขนาดกระดาษ"

#~ msgid "Eject page after job?"
#~ msgstr "ให้คืนกระดาษออกมาหลังจากเสร็จงานด้วยหรือไม่?"

#~ msgid "Uniprint driver options"
#~ msgstr "อ๊อปชั่นของไดรเวอร์แบบ Uniprint"

#~ msgid "Color depth options"
#~ msgstr "อ๊อปชั่นของความละเอียดสี"

#~ msgid "Print text as PostScript?"
#~ msgstr "Print text as PostScript?"

#~ msgid "Fix stair-stepping text?"
#~ msgstr "ให้ทำข้อความ stair-stepping แบบคงที่หรือไม่"

#~ msgid "Number of pages per output pages"
#~ msgstr "จำนวนหน้าต่อครั้ง"

#~ msgid "Right/Left margins in points (1/72 of inch)"
#~ msgstr "ขวา/ซ้าย margins หน่วย points (1/72 of inch)"

#~ msgid "Top/Bottom margins in points (1/72 of inch)"
#~ msgstr "บน/ล่าง margins หน่วย points (1/72 of inch)"

#~ msgid "Extra Text options"
#~ msgstr "อ๊อปชั่นตัวหนังสือ"

#~ msgid "Reverse page order"
#~ msgstr "สลับลำดับหน้า"

#~ msgid "Select Remote Printer Connection"
#~ msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#~ msgid ""
#~ "Every printer need a name (for example lp).\n"
#~ "Other parameters such as the description of the printer or its location\n"
#~ "can be defined. What name should be used for this printer and\n"
#~ "how is the printer connected?"
#~ msgstr ""
#~ "เครื่องพิมพ์ทุกเครื่องต้องการชื่อ\n"
#~ "เครื่องพิมพ์นี้ใช้ชื่ออะไรและ\n"
#~ "เครื่องพิมพ์นี้ติดต่อโดยวิธีใด"

#~ msgid ""
#~ "Every print queue (which print jobs are directed to) needs a\n"
#~ "name (often lp) and a spool directory associated with it. What\n"
#~ "name and directory should be used for this queue and how is the printer "
#~ "connected?"
#~ msgstr ""
#~ "พรินต์คิว (พรินต์คิวเป็นที่ๆงานพิมพ์จะไปเก็บไว้ที่นี่ก่อนส่งเครื่องพิมพ์)\n"
#~ "ต้องการให้มีการตั้งชื่อ (ปกติจะเป็น lp) และไดเร็กทอรีที่เก็บข้อมูล\n"
#~ "คุณต้องการตั้งชื่อ และกำหนดไดเร็กทอรีให้เป็นค่าใดบ้าง?"

#~ msgid "Name of queue"
#~ msgstr "ชื่อของคิว"

#~ msgid "Spool directory"
#~ msgstr "สปูลไดเร็กทอรี"

#, fuzzy
#~ msgid "fsck failed: "
#~ msgstr "การเม้าท์ล้มเหลว: "

#~ msgid "yellow pages"
#~ msgstr "ใช้ระบบสมุดหน้าเหลือง (yellow pages)"

#, fuzzy
#~ msgid "Light configuration"
#~ msgstr "การปรับแต่ง LAN"

#~ msgid "How do you want to connect to the Internet?"
#~ msgstr "คุณต้องการจะต่อเข้า Internet โดยวิธีใด"

#, fuzzy
#~ msgid "Lilo/Grub configuration"
#~ msgstr "การปรับแต่ง LAN"

#~ msgid "Selected size %d%s"
#~ msgstr "เลือกไฟล์ %d%s"

#~ msgid "Opening your connection..."
#~ msgstr "เริ่มการติดต่อ.."

#~ msgid "Configure..."
#~ msgstr "กำลังทำการปรับแต่ง.."

#~ msgid "This startup script try to load your modules for your usb mouse."
#~ msgstr "script เริ่มต้นนี้พยายามที่จะเรียกใช้ modules สำหรับ usb mouse"

#~ msgid "Boot style configuration"
#~ msgstr "การคอนฟิกหลังลักษณะการ boot"

#~ msgid "Configuration complete.  May we write these changes to disk?"
#~ msgstr "การปรับแต่งเรียบร้อย ให้บันทึกข้อมูลได้ใหมครับ"

#, fuzzy
#~ msgid "Welcome to the Internet Connection Sharing utility!"
#~ msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#~ msgid "Configure LILO/GRUB"
#~ msgstr "คอนฟิก LILO/GRUB"

#~ msgid "Create a boot floppy"
#~ msgstr "สร้างแผ่นบูต"

#~ msgid "Format floppy"
#~ msgstr "ฟอร์แมต Floppy"

#~ msgid "Choice"
#~ msgstr "ทางเลือก"
generated by cgit v1.2.1 (git 2.21.0) at 2024-12-27 03:16:14 +0000