summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rwxr-xr-xperl-install/standalone/drakTermServ147
-rwxr-xr-xperl-install/standalone/drakbackup35
2 files changed, 101 insertions, 81 deletions
diff --git a/perl-install/standalone/drakTermServ b/perl-install/standalone/drakTermServ
index 9a0fc48d7..c3c5e8b60 100755
--- a/perl-install/standalone/drakTermServ
+++ b/perl-install/standalone/drakTermServ
@@ -378,88 +378,93 @@ sub text_view {
}
sub help() {
+ my $inittab_str = "/etc/inittab\$\$IP=client_ip\$\$";
+ my $shadow_str = "/etc/shadow\$\$CLIENT\$\$";
+ my $xfconfig_str = "/etc/X11/XF86Config-4\$\$IP=client_ip\$\$";
+
text_view(N("drakTermServ Overview") . "\n\n" .
N(" - Create Etherboot Enabled Boot Images:
- To boot a kernel via etherboot, a special kernel/initrd image must be created.
- mkinitrd-net does much of this work and drakTermServ is just a graphical interface
- to help manage/customize these images. To create the file
- /etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in
- dhcpd.conf, you should create the etherboot images for at least one full kernel.") . "\n\n" .
+ To boot a kernel via etherboot, a special kernel/initrd image must be created.
+ mkinitrd-net does much of this work and drakTermServ is just a graphical
+ interface to help manage/customize these images. To create the file
+ /etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in
+ dhcpd.conf, you should create the etherboot images for at least one full kernel.") . "\n\n" .
N(" - Maintain /etc/dhcpd.conf:
- To net boot clients, each client needs a dhcpd.conf entry, assigning an IP address
- and net boot images to the machine. drakTermServ helps create/remove these entries.
+ To net boot clients, each client needs a dhcpd.conf entry, assigning an IP
+ address and net boot images to the machine. drakTermServ helps create/remove
+ these entries.
- (PCI cards may omit the image - etherboot will request the correct image. You should
- also consider that when etherboot looks for the images, it expects names like
- boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).
+ (PCI cards may omit the image - etherboot will request the correct image.
+ You should also consider that when etherboot looks for the images, it expects
+ names like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).
- A typical dhcpd.conf stanza to support a diskless client looks like:") . "\n\n" .
-" host curly {
- hardware ethernet 00:20:af:2f:f7:9d;
- fixed-address 192.168.192.3;
- #type fat;
- filename \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";
- #hdw_config true;
- }
+ A typical dhcpd.conf stanza to support a diskless client looks like:") . "\n\n" .
+" host curly {
+ hardware ethernet 00:20:af:2f:f7:9d;
+ fixed-address 192.168.192.3;
+ #type fat;
+ filename \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";
+ #hdw_config true;
+ }
" . "\n" .
-N(" While you can use a pool of IP addresses, rather than setup a specific entry for
- a client machine, using a fixed address scheme facilitates using the functionality
- of client-specific configuration files that ClusterNFS provides.
+N(" While you can use a pool of IP addresses, rather than setup a specific entry for
+ a client machine, using a fixed address scheme facilitates using the functionality
+ of client-specific configuration files that ClusterNFS provides.
- Note: The \"#type\" entry is only used by drakTermServ. Clients can either be 'thin'
- or 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run
- most software on the client machine. A special inittab, /etc/inittab\$\$IP=client_ip\$\$ is
- written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are
- modified if thin clients are used, to enable xdmcp. Since there are security issues in
- using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local
- subnet.
+ Note: The '#type' entry is only used by drakTermServ. Clients can either be 'thin'
+ or 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run
+ most software on the client machine. A special inittab, %s is
+ written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are
+ modified if thin clients are used, to enable xdmcp. Since there are security issues in
+ using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local
+ subnet.
- Note: The \"#hdw_config\" entry is also only used by drakTermServ. Clients can either
- be 'true' or 'false'. 'true' enables root login at the client machine and allows local
- hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled
- by creating separate config files associated with the client's IP address and creating
- read/write mount points to allow the client to alter the file. Once you are satisfied
- with the configuration, you can remove root login privileges from the client.
+ Note: The '#hdw_config' entry is also only used by drakTermServ. Clients can either
+ be 'true' or 'false'. 'true' enables root login at the client machine and allows local
+ hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled
+ by creating separate config files associated with the client's IP address and creating
+ read/write mount points to allow the client to alter the file. Once you are satisfied
+ with the configuration, you can remove root login privileges from the client.
- Note: You must stop/start the server after adding or changing clients.") . "\n\n" .
+ Note: You must stop/start the server after adding or changing clients.", $inittab_str) . "\n\n" .
N(" - Maintain /etc/exports:
- Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
- sets up the correct entry to allow anonymous access to the root filesystem from
- diskless clients.
+ Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
+ sets up the correct entry to allow anonymous access to the root filesystem from
+ diskless clients.
- A typical exports entry for clusternfs is:
+ A typical exports entry for clusternfs is:
- / (ro,all_squash)
- /home SUBNET/MASK(rw,root_squash)
+ / (ro,all_squash)
+ /home SUBNET/MASK(rw,root_squash)
- With SUBNET/MASK being defined for your network.") .
+ With SUBNET/MASK being defined for your network.") .
"\n\n" .
-N(" - Maintain /etc/shadow\$\$CLIENT\$\$:
- For users to be able to log into the system from a diskless client, their entry in
- /etc/shadow needs to be duplicated in /etc/shadow\$\$CLIENTS\$\$. drakTermServ helps
- in this respect by adding or removing system users from this file.") . "\n\n" .
-N(" - Per client /etc/X11/XF86Config-4\$\$IP-ADDRESS\$\$:
- Through clusternfs, each diskless client can have its own unique configuration files
- on the root filesystem of the server. By allowing local client hardware configuration,
- drakTermServ will help create these files.") .
+N(" - Maintain %s:
+ For users to be able to log into the system from a diskless client, their entry in
+ /etc/shadow needs to be duplicated in %s. drakTermServ
+ helps in this respect by adding or removing system users from this file.", $shadow_str, $shadow_str) . "\n\n" .
+N(" - Per client %s:
+ Through clusternfs, each diskless client can have its own unique configuration files
+ on the root filesystem of the server. By allowing local client hardware configuration,
+ drakTermServ will help create these files.", $xfconfig_str) .
"\n\n" .
N(" - Per client system configuration files:
- Through clusternfs, each diskless client can have its own unique configuration files
- on the root filesystem of the server. By allowing local client hardware configuration,
- clients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse,
- /etc/sysconfig/keyboard on a per-client basis.
+ Through clusternfs, each diskless client can have its own unique configuration files
+ on the root filesystem of the server. By allowing local client hardware configuration,
+ clients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse,
+ /etc/sysconfig/keyboard on a per-client basis.
Note: Enabling local client hardware configuration does enable root login to the terminal
- server on each client machine that has this feature enabled. Local configuration can be turned
- back off, retaining the configuration files, once the client machine is configured.") . "\n\n" .
+ server on each client machine that has this feature enabled. Local configuration can be
+ turned back off, retaining the configuration files, once the client machine is configured.") . "\n\n" .
N(" - /etc/xinetd.d/tftp:
- drakTermServ will configure this file to work in conjunction with the images created by
- mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each
- diskless client.
+ drakTermServ will configure this file to work in conjunction with the images created
+ by mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to
+ each diskless client.
- A typical tftp configuration file looks like:
+ A typical tftp configuration file looks like:
- service tftp
+ service tftp
{
disable = no
socket_type = dgram
@@ -468,20 +473,20 @@ N(" - /etc/xinetd.d/tftp:
user = root
server = /usr/sbin/in.tftpd
server_args = -s /var/lib/tftpboot
- }
+ }
- The changes here from the default installation are changing the disable flag to
- 'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
- puts its images.") . "\n\n" .
+ The changes here from the default installation are changing the disable flag to
+ 'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
+ puts its images.") . "\n\n" .
N(" - Create etherboot floppies/CDs:
- The diskless client machines need either ROM images on the NIC, or a boot floppy
- or CD to initate the boot sequence. drakTermServ will help generate these images,
- based on the NIC in the client machine.
+ The diskless client machines need either ROM images on the NIC, or a boot floppy
+ or CD to initate the boot sequence. drakTermServ will help generate these
+ images, based on the NIC in the client machine.
- A basic example of creating a boot floppy for a 3Com 3c509 manually:
+ A basic example of creating a boot floppy for a 3Com 3c509 manually:
- cat /usr/lib/etherboot/boot1a.bin \\
- /usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0") . "\n\n");
+ cat /usr/lib/etherboot/boot1a.bin \\
+ /usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0") . "\n\n");
}
sub make_boot() {
diff --git a/perl-install/standalone/drakbackup b/perl-install/standalone/drakbackup
index 93841301e..f6339aee1 100755
--- a/perl-install/standalone/drakbackup
+++ b/perl-install/standalone/drakbackup
@@ -431,7 +431,7 @@ sub all_user_list() {
while (defined(my $line = <PASSWD>)) {
chomp($line);
($user, $uid) = (split(/:/, $line))[0, 2];
- if ($uid >= 500 || $uid == 0) {
+ if ($uid >= 500 && $uid < 65000 || $uid == 0) {
push @user_list_all, $user;
}
}
@@ -601,7 +601,15 @@ sub get_cd_info() {
sub save_conf_file() {
write_sitecopyrc() if $net_proto eq 'webdav';
write_password_file() if $net_proto eq 'rsync' && $passwd_user;
-
+ if (!$backup_daemon) {
+ $when_space = "";
+ $daemon_media = "";
+ }
+ if (@user_list == ()) {
+ $backup_user = 0;
+ } else {
+ $backup_user = 1;
+ }
my @cfg_list = ("SYS_FILES=@sys_files\n",
"HOME_FILES=@user_list\n",
"OTHER_FILES=@list_other\n",
@@ -624,7 +632,7 @@ sub save_conf_file() {
$backup_user_versions and push @cfg_list, "USER_INCREMENTAL_BACKUPS\n";
$backup_other_versions and push @cfg_list, "OTHER_INCREMENTAL_BACKUPS\n";
$sys_diff_mode and $backup_sys_versions and push @cfg_list, "SYS_DIFFERENTIAL_BACKUPS\n";
- $user_diff_mode and $backup_user_versions and push @cfg_list, "USER_DIFFERENTIAL_BACKUPS\n";
+ $backup_user and $user_diff_mode and $backup_user_versions and push @cfg_list, "USER_DIFFERENTIAL_BACKUPS\n";
$other_diff_mode and $backup_other_versions and push @cfg_list, "OTHER_DIFFERENTIAL_BACKUPS\n";
$media_erase and push @cfg_list, "MEDIA_ERASE\n";
$media_eject and push @cfg_list, "MEDIA_EJECT\n";
@@ -655,6 +663,7 @@ sub save_conf_file() {
$dvdram and push @cfg_list, "DVDRAM\n";
$what_no_browser or push @cfg_list, "BROWSER_CACHE\n";
$backup_sys or push @cfg_list, "NO_SYS_FILES\n";
+ $backup_user or push @cfg_list, "NO_USER_FILES\n";
if ($comp_mode) {
push @cfg_list, "OPTION_COMP=TAR.BZ2\n";
} else {
@@ -758,7 +767,7 @@ sub read_conf_file() {
next if /^#/;
chomp;
if (/^SYS_FILES/) { s/^SYS_FILES=//gi; @sys_files = split(' ', $_) }
- if (/^HOME_FILES/) { s/^HOME_FILES=//gi; @user_list = split(' ', $_) }
+ if (/^HOME_FILES/) { s/^HOME_FILES=//gi; @user_list = split(' ', $_); $backup_user = 1 }
if (/^OTHER_FILES/) { s/^OTHER_FILES=//gi; @list_other = split(' ', $_) }
if (/^PATH_TO_SAVE/) { s/^PATH_TO_SAVE=//gi; $save_path = $_ }
if (/^NO_SYS_FILES/) { $backup_sys = 0 }
@@ -2537,7 +2546,7 @@ sub advanced_when() {
'weekly' => N("weekly"),
'monthly' => N("monthly"),
'custom' => N("custom"));
- $combo_when_space->set_popdown_strings(N("hourly"), N("daily"), N("weekly"), N("monthly"), N("custom"));
+ $combo_when_space->set_popdown_strings("", N("hourly"), N("daily"), N("weekly"), N("monthly"), N("custom"));
set_help_tip($combo_when_space, 'when_space');
#- custom setup - let user specify month, day of month, day of week, hour, minute
@@ -2578,7 +2587,7 @@ sub advanced_when() {
#- drop down list of possible media - default to config value
my $entry_media_type = new Gtk2::OptionMenu();
- $entry_media_type->set_popdown_strings(@media_types, @net_methods);
+ $entry_media_type->set_popdown_strings("", @media_types, @net_methods);
$entry_media_type->entry->set_text($daemon_media);
gtkpack($advanced_box,
@@ -2877,7 +2886,12 @@ sub wizard() {
my $box2;
my $user_string = N("Backup Users");
$user_string .= N(" (Default is all users)") if !$nonroot_user;
-
+ if ($backup_user) {
+ @user_list = @user_list_all;
+ } else {
+ @user_list = ();
+ }
+
gtkpack($advanced_box,
$box2 = gtkpack_(new Gtk2::HBox(0, 15),
1, new Gtk2::VBox(0, 5),
@@ -2988,8 +3002,8 @@ sub system_state() {
}
#- tape and CDRW share some features
- my $erase_media = 'NO';
- $erase_media = 'YES' if $media_erase && ($where_cd || $where_tape);
+ my $erase_media = N("NO");
+ $erase_media = N("YES") if $media_erase && ($where_cd || $where_tape);
$where_cd and $system_state .= N("\n- Burn to CD");
$where_cd and $cdrw and $system_state .= N("RW");
$where_cd and $system_state .= N(" on device: %s", $cd_device);
@@ -3012,7 +3026,7 @@ sub system_state() {
$system_state .= N("\tUse .backupignore files\n") if $backupignore;
$system_state .= N("\tSend mail to %s\n", $user_mail) if $user_mail;
- $daemon_media and $system_state .= N("\n- Daemon (%s) include:\n", $when_space);
+ $daemon_media and $system_state .= N("\n- Daemon, %s via:\n", $when_space);
$daemon_media eq 'hd' and $system_state .= N("\t-Hard drive.\n");
$daemon_media eq 'cd' and $system_state .= N("\t-CD-R.\n");
$daemon_media eq 'tape' and $system_state .= N("\t-Tape \n");
@@ -4957,6 +4971,7 @@ sub build_backup_box_see_conf {
my ($caller) = @_;
my $box2;
my $text = new Gtk2::TextView;
+ read_conf_file();
system_state();
gtktext_insert($text, [ [ $system_state ] ]);
button_box_restore_main();