summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/Makefile4
-rw-r--r--perl-install/common.pm14
-rw-r--r--perl-install/detect_devices.pm8
-rw-r--r--perl-install/install2.pm6
-rw-r--r--perl-install/install_any.pm20
-rw-r--r--perl-install/install_steps.pm18
-rw-r--r--perl-install/install_steps_interactive.pm50
-rw-r--r--perl-install/my_gtk.pm5
-rw-r--r--perl-install/printer.pm23
-rw-r--r--perl-install/share/list1
10 files changed, 121 insertions, 28 deletions
diff --git a/perl-install/Makefile b/perl-install/Makefile
index b968863c7..a6cae4b8e 100644
--- a/perl-install/Makefile
+++ b/perl-install/Makefile
@@ -11,7 +11,7 @@ BASE = $(ROOTDEST)/Mandrake/base
DESTREP4PMS = $(DEST)$(REP4PMS)
STAGE2TMP = /tmp/stage2_tmp
PERL = perl
-LOCALFILES = mouseconfig ddcxinfos
+LOCALFILES = pnp_serial mouseconfig ddcxinfos
DIRS = c po pci_probing resize_fat
EXCLUDE = $(LOCALFILES) boot.img keymaps consolefonts install
RPMS = $(wildcard $(ROOTDEST)/Mandrake/RPMS/*.rpm)
@@ -138,7 +138,7 @@ get_needed_files: $(DIRS)
cp -a keymaps $(DEST)/usr/share
cp -a consolefonts $(DEST)/usr/share
- cp modparm.lst MonitorsDB $(DEST)/usr/share
+ cp kppprc.in modparm.lst MonitorsDB $(DEST)/usr/share
cp logo-mandrake.xpm $(DEST)/usr/share
cp -a themes $(DEST)/usr/share/gtk
cp compss compssUsers compssList $(ROOTDEST)/Mandrake/base
diff --git a/perl-install/common.pm b/perl-install/common.pm
index b32f9ff11..59e32bd61 100644
--- a/perl-install/common.pm
+++ b/perl-install/common.pm
@@ -239,11 +239,15 @@ sub translate {
my ($s) = @_;
my ($lang) = substr($ENV{LC_ALL} || $ENV{LANGUAGE} || $ENV{LC_MESSAGES} || $ENV{LANG} || '', 0, 2);
- require 'lang.pm';
- lang::load_po ($lang) unless defined $po::I18N::{$lang}; #- the space if needed to mislead perl2fcalls (as lang is not included here)
- $po::I18N::{$lang} or return $s;
- my $l = *{$po::I18N::{$lang}};
- $l->{$s} || $s;
+ if ($lang) {
+ require 'lang.pm';
+ lang::load_po ($lang) unless defined $po::I18N::{$lang}; #- the space if needed to mislead perl2fcalls (as lang is not included here)
+ $po::I18N::{$lang} or return $s;
+ my $l = *{$po::I18N::{$lang}};
+ $l->{$s} || $s;
+ } else {
+ $s; #- should avoid some strange behaviour if no lang defined.
+ }
}
sub untranslate($@) {
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
index 7119fbd84..d932b4922 100644
--- a/perl-install/detect_devices.pm
+++ b/perl-install/detect_devices.pm
@@ -210,6 +210,14 @@ sub whatPrinterPort() {
grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2);
}
+sub hasModem($) {
+ my ($device) = @_;
+ my %probe;
+ local *F; open F, "pnp_serial $device |";
+ foreach (<F>) { $probe{$1} = $2 if /^\s+(.*?)\s*:\s*\"(.*)\"\s*$/ }
+ $probe{CLASS} =~ /Modem/i && $probe{DESCRIPTION};
+}
+
#-######################################################################################
#- Wonderful perl :(
#-######################################################################################
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index 3765fb147..be8c56704 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -48,6 +48,7 @@ my @installSteps = (
doInstallStep => [ __("Install system"), 1, -1 ],
miscellaneous => [ __("Miscellaneous"), 1, 1 ],
configureNetwork => [ __("Configure networking"), 1, 1, "formatPartitions" ],
+#- configureModem => [ __("Configure modem"), 1, 1, "doInstallStep" ],
configureTimezone => [ __("Configure timezone"), 1, 1, "doInstallStep" ],
#- configureServices => [ __("Configure services"), 0, 0 ],
configurePrinter => [ __("Configure printer"), 1, 0, "doInstallStep" ],
@@ -364,6 +365,11 @@ sub configureNetwork {
$o->configureNetwork($entered == 1 && !$clicked)
}
#------------------------------------------------------------------------------
+sub configureModem {
+ my ($clicked, $entered) = @_;
+ $o->modemConfig($clicked || $entered == 1);
+}
+#------------------------------------------------------------------------------
sub configureTimezone {
my ($clicked) = $_[0];
my $f = "$o->{prefix}/etc/sysconfig/clock";
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 654e703b3..633e9d6c6 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -422,3 +422,23 @@ sub fsck_option() {
my $y = $::o->{security} < 3 && $::beginner && "-y ";
substInFile { s/^(\s*fsckoptions=)(-y )?/$1$y/ } "$::o->{prefix}/etc/rc.d/rc.sysinit";
}
+
+sub translate_file($$%) {
+ my ($inputfile, $outputfile, %toreplace) = @_;
+ local *OUT; local *IN;
+
+ open IN , $inputfile or die "Can't open $inputfile $!";
+ if ($::testing) {
+ *OUT = *STDOUT;
+ } else {
+ open OUT, ">$outputfile" or die "Can't open $outputfile $!";
+ }
+
+ while (<IN>) {
+ if (/@@@(.*)@@@/) {
+ my $r = $toreplace{$1};
+ s/@@@(.*)@@@/$r/g;
+ }
+ print OUT;
+ }
+}
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index ccf47b4c5..3e14faa07 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -246,6 +246,24 @@ sub pcmciaConfig($) {
}
#------------------------------------------------------------------------------
+sub modemConfig {
+ my ($o) = @_;
+ symlinkf($o->{modem}{device}, "$o->{prefix}/dev/modem") if $o->{modem};
+}
+
+sub pppConfig {
+ my ($o) = @_;
+ my %toreplace;
+
+ $toreplace{$_} = $o->{modem}{$_} foreach qw(connection phone login passwd auth domain);
+ $toreplace{phone} =~ s/[^\d]//g;
+ $toreplace{dnsserver} = ($o->{modem}{dns1} && "$o->{modem}{dns1},") . ($o->{modem}{dns2} && "$o->{modem}{dns2},");
+ $toreplace{exdnsdisabled} = $o->{modem}{exdnsdisabled} ? 1 : 0;
+ install_any::translate_file("/usr/share/kppprc.in" ,"$o->{prefix}/root/.kde/share/config/kppprc", %toreplace);
+ install_any::translate_file("/usr/share/kppprc.in" ,"$o->{prefix}/etc/skel/.kde/share/config/kppprc", %toreplace);
+}
+
+#------------------------------------------------------------------------------
sub timeConfig {
my ($o, $f) = @_;
timezone::write($o->{prefix}, $o->{timezone}, $f);
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index e74c78b3c..75bf2a715 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -253,6 +253,7 @@ sub configureNetwork($) {
$r ||= "Don't";
}
} else {
+# $r = $o->ask_from_list(_("Network Configuration"),)
$o->ask_yesorno(_("Network Configuration"),
_("Do you want to configure LAN (not dialup) networking for your system?")) or $r = "Don't";
}
@@ -332,6 +333,55 @@ You may also enter the IP address of the gateway if you have one"),
}
#------------------------------------------------------------------------------
+sub modemConfig {
+ my ($o, $clicked) = @_;
+ return unless $clicked;
+
+ if ($o->ask_yesorno('', _("Do you have a modem?"), 0)) {
+ my ($device, $desc) = '';
+ unless ($::expert && $o->ask_yesorno('', _("Skip modem autodetection?"), 1)) {
+ foreach (0..3) {
+ next if readlink("$o->{prefix}/dev/mouse") =~ /ttyS$_/;
+ $desc = detect_devices::hasModem("$o->{prefix}/dev/ttyS$_");
+ $device = "ttyS$_" if $desc;
+ last if $device;
+ }
+ }
+ $device = mouse::serial_ports_names2dev($o->ask_from_list('', _("Which serial port is your modem connected to?"),
+ [ mouse::serial_ports_names() ])) unless $device;
+ log::l("using modem at /dev/$device");
+ $o->{modem}{device} = $device;
+ } else {
+ $o->{modem} = undef;
+ }
+
+ install_steps::modemConfig($o);
+
+ $o->pppConfig() if $o->{modem};
+}
+
+sub pppConfig {
+ my ($o) = @_;
+
+ my @l = (
+_("Connection name") => \$o->{modem}{connection},
+_("Phone number") => \$o->{modem}{phone},
+_("Login ID") => \$o->{modem}{login},
+_("Password") => { val => \$o->{modem}{passwd}, hidden => 1 },
+_("Authentication") => { val => \$o->{modem}{auth}, list => [ __("PAP"), __("CHAP"), __("Terminal-based"), __("Script-based") ] },
+_("Domain name") => \$o->{modem}{domain},
+_("First DNS Server") => \$o->{modem}{dns1},
+_("Second DNS Server") => \$o->{modem}{dns2},
+_("Disable existing DNS servers during connection") => { val => \$o->{modem}{exdnsdisabled}, type => 'bool', },
+ );
+
+ install_steps::pppConfig($o) if $o->ask_from_entries_ref('',
+ _("Dial-in options"),
+ [ grep_index { even($::i) } @l ],
+ [ grep_index { odd($::i) } @l ]);
+}
+
+#------------------------------------------------------------------------------
sub timeConfig {
my ($o, $f, $clicked) = @_;
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
index 5dcd9b4da..733cad611 100644
--- a/perl-install/my_gtk.pm
+++ b/perl-install/my_gtk.pm
@@ -64,11 +64,16 @@ sub destroy($) {
sub DESTROY { goto &destroy }
sub sync($) {
my ($o) = @_;
+
+ flush();
+
show($o);
my $h = Gtk->idle_add(sub { Gtk->main_quit; 1 });
map { Gtk->main } (1..4);
Gtk->idle_remove($h);
+
+ flush();
}
sub flush(;$) {
Gtk->main_iteration while Gtk->events_pending;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index d46002c6c..cf7d52cbb 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -354,27 +354,8 @@ sub create_spool_dir($) {
#-Doesnt currently catch error exec'ing sed yet
#------------------------------------------------------------------------------
sub create_config_file($$%) {
- my ($inputfile, $outpufile, %toreplace) = @_;
- my ($in, $out) = ("$prefix/$inputfile", "$prefix/$outpufile");
- local *OUT;
- local *IN;
-
- #-TODO my $oldmask = umask 0755;
-
- open IN , $in or die "Can't open $in $!";
- if ($::testing) {
- *OUT = *STDOUT
- } else {
- open OUT, ">$out" or die "Can't open $out $!";
- }
-
- while (<IN>) {
- if (/@@@(.*)@@@/) {
- my $r = $toreplace{$1};
- s/@@@(.*)@@@/$r/g;
- }
- print OUT;
- }
+ my ($inputfile, $outputfile, %toreplace) = @_;
+ install_any::translate_file("$prefix/$inputfile", "$prefix/$outputfile", %toreplace);
}
diff --git a/perl-install/share/list b/perl-install/share/list
index 1368b0c35..cda42dfca 100644
--- a/perl-install/share/list
+++ b/perl-install/share/list
@@ -12,6 +12,7 @@
/usr/bin/bzip2
/usr/bin/perl
/usr/bin/zsh
+/usr/lib/libimlib-png.so
/usr/lib/gtk/themes/engines/libpixmap.so
/usr/lib/gtk/themes/engines/libpixmap.la
/usr/lib/libimlib-png.so
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-01 16:23:43 +0000