diff options
Diffstat (limited to 'perl-install')
| -rw-r--r-- | perl-install/ChangeLog | 3407 |
1 files changed, 3406 insertions, 1 deletions
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog index fd7905c24..45259fb97 100644 --- a/perl-install/ChangeLog +++ b/perl-install/ChangeLog @@ -1,3 +1,3408 @@ +2003/01/03 Pixel <pixel@mandrakesoft.com> + + * interactive.pm: fix call to method ask_from__add_modify_removeW + + * mdk-stage1/minilibc.c: add symbols __libc_csu_fini and __libc_csu_init + to be compatible with new glibc (?) + +2003/01/02 Guillaume Cottenceau <gc@mandrakesoft.com> + + * ugtk2.pm: titi's message annoys me too much.. removing it + +2003/01/02 Pixel <pixel@mandrakesoft.com> + + * install_steps_interactive.pm: replace any::load_category() with + modules::interactive::load_category() + + * Xconfig/test.pm: X test is now working :) + + * interactive.pm (ask_from__add_modify_remove): check all callbacks are + given + (ask_from__add_modify_remove): fix + add ask_from__add_modify_remove, and use it for bootloader entries + + * any.pm: add ask_from__add_modify_remove, and use it for bootloader + entries + +2003/01/02 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk2.pm: + - Layout widget has native scrolling support + - shadow parameter can always be used + + * standalone.pm: fixes for wizards + + * drakxtools.spec: 9.1-0.6mdk + merge in back external stefan changes + + * standalone/logdrake: embedding fixes + +2002/12/30 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/fi.po: updated Finnish file + +2002/12/29 Pixel <pixel@mandrakesoft.com> + + * network/ethernet.pm: move any::load_category() to + network::interactive::load_category() + (and a few other functions which are only used by load_category()) + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + + * printer/gimp.pm: set_permissions() doesn't want the given file to be + $::prefix'ed + + * network/network.pm, standalone/drakproxy: + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + + * pkgs.pm: use "our" instead of "use vars" + *pkg::LOG is unused, so don't export it + + * install_steps.pm: move any::runlevel() to Xconfig::various::runlevel() + - move any::choose_security_level() to security::level::level_choose() + - move any::config_security_user() to + security::various::config_security_user() + - move any::config_libsafe() and security::libsafe::config_libsafe() + to security::various::config_libsafe() + no need to close *pkgs::LOG, pkgs handles it nicely now + + * install_steps_interactive.pm: move any::keyboard_group_toggle_choose() + to keyboard::group_toggle_choose() + - move any::choose_security_level() to security::level::level_choose() + - move any::config_security_user() to + security::various::config_security_user() + - move any::config_libsafe() and security::libsafe::config_libsafe() + to security::various::config_libsafe() + cleanup comments + + * security/various.pm: deprecates security::libsafe + + * security/level.pm, security/libsafe.pm, install2.pm: + - move any::choose_security_level() to security::level::level_choose() + - move any::config_security_user() to + security::various::config_security_user() + - move any::config_libsafe() and security::libsafe::config_libsafe() + to security::various::config_libsafe() + + * network/modem.pm: in network::modem::configure $intf is unused, rename + it to $_intf + - do not use a global $in in network::modem, pass it as a parameter + - create network::modem::ppp_configure_raw() which doesn't need $in + (it is only used by network::modem::ppp_configure(), but this is clearer + that way) + - use $::prefix instead the global $prefix + - don't pass $prefix to ppp_configure + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + + * Xconfig/various.pm, bootlook.pm, Xconfig/main.pm: move any::runlevel() + to Xconfig::various::runlevel() + + * keyboard.pm, standalone/keyboarddrake: move + any::keyboard_group_toggle_choose() to keyboard::group_toggle_choose() + + * network/netconnect.pm: + - do not use a global $in in network::modem, pass it as a parameter + - create network::modem::ppp_configure_raw() which doesn't need $in + (it is only used by network::modem::ppp_configure(), but this is clearer + that way) + + * standalone/drakconnect: any::load_category_no_message() doesn't exist + anymore, it really is modules::load_category() ! + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + + * modules/interactive.pm: move any::load_category() to + network::interactive::load_category() + (and a few other functions which are only used by load_category()) + + * any.pm: cleanup (using ask_from instead of ask_from_listf_) + cleanup (using "format => ...") + move any::load_category() to network::interactive::load_category() + (and a few other functions which are only used by load_category()) + move any::keyboard_group_toggle_choose() to + keyboard::group_toggle_choose() + move any::runlevel() to Xconfig::various::runlevel() + - move any::choose_security_level() to security::level::level_choose() + - move any::config_security_user() to + security::various::config_security_user() + - move any::config_libsafe() and security::libsafe::config_libsafe() + to security::various::config_libsafe() + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + + * network/isdn.pm: + - do not use a global $in in network::modem, pass it as a parameter + - create network::modem::ppp_configure_raw() which doesn't need $in + (it is only used by network::modem::ppp_configure(), but this is clearer + that way) + - move any::pppConfig() to network::modem::ppp_configure() + - move any::miscellaneousNetwork() to + network::network::proxy_configure() + (and uses the parameter instead of $::o->{miscellaneous}) + - move network::network::miscellaneousNetwork() to + network::network::miscellaneous_choose() + (and do not export it) + (and uses a parameter instead of $::o->{miscellaneous}) + - move network::modem::pppConfig() to network::modem::ppp_choose() + (and change parameter order, and drop unused parameter $intf) + - do not export network::network::write_interface_conf() + (since it is only used locally (?)) + - cleanup network::network::write_interface_conf() + (one still needs to pass $::o->{miscellaneous}{track_network_id} more + cleanly, and use run_program::rooted when calling /sbin/ip) + +2002/12/28 Pixel <pixel@mandrakesoft.com> + + * standalone.pm: don't import everything from "common" (including + MDK::Common::*) to get rid of + warnings "Subroutine renamef redefined ..." "Subroutine linkf redefined + ..." + ... (but I don't understand how to make explainations on common_functs + work?!) + + * printer/gimp.pm: + - mkdir_p throws an exception on error, so "mkdir_p() or ..." is dumb, + fixing + (thanks to Lea Gris) + - use output() + +2002/12/24 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po: Updated Portuguese file + +2002/12/23 Guillaume Cottenceau <gc@mandrakesoft.com> + + * lang.pm: CJK font names changes (still doesn't work :/) + + * share/list: perl's automatic utf8 handling will need these files (will + try to do better in the future) + + * install_steps_gtk.pm: fix 'bold' advertisements + + * share/fonts.tar.bz2: use another default font + have a default fixed alias for a font which will always be here even in + ramdisk + + * tools/make_mdkinst_stage2: fonts changes (doesn't work with CJK (at + least) in ramdisk, though) + + * Xconfig/resolution_and_depth.pm: workaround gtk bug in + gtk_entry_set_text + fix titi porting gtk2 without testing enough.. + + * interactive/gtk.pm: be more efficient in precomputing, previous + situation could lead to several tens of seconds of wait in + XFdrake-monitor + +2002/12/23 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt_BR.po: updated Brazilian file + +2002/12/23 Pixel <pixel@mandrakesoft.com> + + * printer/printerdrake.pm: help perl_checker (interactive is used even if + the constructor is not there) + + * Xconfig/resolution_and_depth.pm: fix setting size of depth combo + +2002/12/20 Guillaume Cottenceau <gc@mandrakesoft.com> + + * lang.pm: simplify since we don't use X11 fonts (we can't since + GDK_USE_XFT is not switchable once program is launched) + + * mouse.pm: image in CVS is 3b+, not 3bp + + * share/themes-mdk.rc: allow gtk2 theme engine to find pixmaps + + * share/list, Makefile: list files changes for gtk2 (is that really + optimal to have utf8.pm and utf8_heavy.pl?) + +2002/12/20 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po: updated Portuguese file + updated Portuguese file + + * share/fonts.tar.bz2: updated fonts tarball, all old bitmap fonts have + been removed, + now it only includes: + - an OpenType font with glyphs for latin and cyrillic + - two unicode encoded bitmap fonts with glyphs for CJK and Greek + (and it could be used for non latin/cyrillic scripts for which there + isn't any outline font available). + Those fonts are based on fonts shipped with XFree86 (Nimbus Sans L and + "misc-fixed"), but with some modifications (extra glyphs added to + complete the "holes" in latin and cyrillic for the outline font, + added a few missing chines chars and changed ascii portion from + monospaced + to varaible width for the bitmap fonts (so the visual output is + better)). + The choice of bitmap fonts for CJK has been done due to the very huge + size of CJK outline fonts. + + * share/po/fi.po: updated Finnish file + + * share/po/eo.po: Small change in Esperanto file + +2002/12/20 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk2.pm: gtk+2 support for plug/socket is back since 2.1.5-2mdk + +2002/12/19 Guillaume Cottenceau <gc@mandrakesoft.com> + + * mdk-stage1/doc/README: meuh + +2002/12/19 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po: updated Portuguese file + + * share/po/ta.po: Converted Tamil file to utf-8 + +2002/12/19 Pixel <pixel@mandrakesoft.com> + + * Makefile: add "make test_pms_all" + + * standalone/.perl_checker: use libDrakX from CVS (ie. ..) in perl_checker + + * printer/cups.pm, printer/main.pm, printer/printerdrake.pm: + - printer::main::read_cups_printer_list() is now + printer::cups::read_printer_list() (but it is unused!) + - printer::main::get_cups_remote_queues() is now + printer::cups::get_formatted_remote_queues() + - cleanup printer::cups::get_remote_queues() using + printer::cups::lpstat_v() + + * standalone/drakupdate_fstab: any::get_secure_level() doesn't exist + anymore, use security::level::get() instead (fix titi change) + + * printer/gimp.pm: do not use "$1 !~ ..." + +2002/12/19 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * drakxtools.spec: conflict with "non gtk+-2 aware" releases of mcc + 9.1-0.4mdk + +2002/12/18 Pixel <pixel@mandrakesoft.com> + + * any.pm, .perl_checker, install_any.pm: new features including checking + unused functions, and checking methods being available + + * install2.pm, partition_table.pm: enumerate the various required packages + when requiring a package dynamically known + + * standalone.pm, Newt/Newt.pm: help perl_checker knowing packages are used + as classes + + * diskdrake/interactive.pm, lvm.pm, fsedit.pm: add "new" to lvm.pm, and + use it + + * .cvsignore: ignore .perl_checker.cache + +2002/12/18 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * Xconfig/resolution_and_depth.pm: XFdrake gtk+-2 + + * Xconfig/test.pm: fix + XFdrake gtk+-2 + + * standalone/drakperm: + - basic gtk+-2 port (edition is not ready yet) + - perl_checker fixes + + * ugtk2.pm: perl_checker fixes + disable embedded mode for now due to gtk+-2 bugs + fix wizards and draconnect: + it's the same code as in old my_gtk but i don't understand + how it could have worked... + yet the logic is quite simple : we add the "previous" button only if + we're not in the wizard's first page; but the "next/finish" button + must still be added, else the wizard is quite unusefull :-( + + * standalone/harddrake2, harddrake/data.pm: saner default size (too big + for 800x600 sadly) + + * standalone/drakconnect: refresh: remove current interfaces before + readding them, like it was + before + - consolidate some code into new_dialog + - simplify through MDK::Common + perl_checker fixes + - gtk+-2 port is completed (switch from CList to TreeView) + - gtk+-2 minor fixes (use new API rather than old one) + - fix non wizard mode (add to frame not to window which is already + full) + - wizard mode is fixed by previous ugtk2 fix + - simplify through MDK::Common + fix drakconnect warnings + +2002/12/17 alus + + * share/po/pl.po: updated + +2002/12/17 Daouda Lo <daouda@mandrakesoft.com> + + * ugtk2.pm: + - export gtkappend_page + - add gtkappend_page function (for gui building wizard) + +2002/12/16 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po: updated Portuguese file + +2002/12/16 Pixel <pixel@mandrakesoft.com> + + * Xconfig/card.pm: fix english typo (thanks to J. Grant) + + * mouse.pm: really drop update_type_name + + * fsedit.pm: really drop check() + + * standalone/drakautoinst: use ->method syntax for method call + +2002/12/16 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk2.pm: build automatically the font description if needed + fix string_size() usage in get_text_coord() + +2002/12/14 Pixel <pixel@mandrakesoft.com> + + * network/netconnect.pm: do not export start_internet and stop_internet + (was broken since network::netconnect do not inheritate from Exporter) + +2002/12/13 Guillaume Cottenceau <gc@mandrakesoft.com> + + * install_messages.pm: must return a true value + + * interactive/gtk.pm: expand_row no longer bugs, great :) + + * c/stuff.xs.pl: iconv_ is needed all the times, not only in drakx + +2002/12/13 Pixel <pixel@mandrakesoft.com> + + * install_any.pm (kdeicons_postinstall): drop (unused) + + * detect_devices.pm: drop hasUltra66 (unused) + + * any.pm, bootloader.pm: drop loadlin handling + + * network/network.pm, ugtk.pm, my_gtk.pm, printer/data.pm, + partition_table.pm, ugtk2.pm: remove exported names which are not + defined + + * printer/main.pm: commit the real code, not the debug code :-( + put back the comment + (read_cups_printer_list, get_cups_remote_queues): much cleanup + + * fsedit.pm (check): drop it (unused, maybe you should use + diskdrake::interactive::check instead) + + * services.pm: use wrap_text (instead of handcoding it) + + * Xconfig/various.pm (show_info): drop (unused) + + * timezone.pm (sexProb): drop (unused!) + + * standalone/drakbackup: replace "%" with "%%" in translated string + + * mouse.pm (update_type_name): drop (unused (?)) + + * bootlook.pm: drop unused function + + * fs.pm (add_options): drop (unused, use mount_options_unpack + + mount_options_pack instead) + (mount_all): drop (unused, use formatMount_all instead) + +2002/12/13 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * Makefile.drakxtools, Makefile: fix installation after pixel changes + + * drakxtools.spec: fix {build,}requires for gtk+2 + + * ugtk.pm: remove uneeded variables + + * standalone.pm: remove double + move draksec's gui into the standalone program, + nobody will uses it so it's useless to load drakx with it. + also use common cli options managment + + * standalone/harddrake2: perl_checker fixes + + * security/main.pm, standalone/draksec: move draksec's gui into the + standalone program, + nobody will uses it so it's useless to load drakx with it. + also use common cli options managment + +2002/12/12 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po, share/po/he.po: Added a starting Hebrew file; updated + Portguese file + +2002/12/12 Pixel <pixel@mandrakesoft.com> + + * install_steps_interactive.pm: remove unused variable $clicked + remove some $::expert + remove beginner/expert choice + + * install_steps_gtk.pm: remove beginner/expert choice + + * ugtk.pm: unused variables renamed with a leading underscore (some code + should be removed?) + + * diskdrake/hd_gtk.pm: when clicking on one of the legend buttons together + with an existing partition + selected, it doesn't change the partition type, it tells to use "Type" + (it used to be ignored in non-expert, and do a change type in expert) + + * install2.pm: drop options "fexpert" and "fbeginner" which used to skip + the choice expert/beginner + +2002/12/12 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk2.pm: simplify + add gtkmodify_font() and gtkset_property() + + * standalone/harddrake2: better english + don't confuse people by altering sentences that could have been + interpreted as questions + - s/::/:/ on cpu info + - print field names in bold blue rather than just blue + +2002/12/11 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/zh_CN.po, share/po/pt.po: updated Portuguese and Chinese files + +2002/12/11 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk2.pm: reuse already consolided code + reuse already consolided code + add set_back_pixbuf() to let a widget paint itself a pixbuf in its + background rather that doing this ourselves in rpmdrake or mcc + +2002/12/10 Pixel <pixel@mandrakesoft.com> + + * share/po/Makefile, share/po/fake_c.pl: use "perl_checker --generate-pot" + instead of fake_c + xgettext + + * Xconfig/test.pm: do not duplicate "An error occurred ..." t10n string + + * any.pm, bootloader.pm: perl_checker --generate-pot is a bit picky about + the localisation of "#-PO:" comments + + * install_steps_interactive.pm: fix % in translated string (it must be %%) + + * standalone/drakbug, standalone/logdrake, standalone/drakfloppy, + standalone/drakTermServ, standalone/drakautoinst, standalone/drakbackup, + standalone/drakconnect, standalone/drakxtv: minimal perl_checker fixes + to have only warnings + + * Makefile.config: service_harddrake.sh is not a PM, so i remove it from + STANDALONEPMS_ + live_install is a shell script, do not pretend it's perl ;p + +2002/12/10 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * network/netconnect.pm, network/tools.pm, network/isdn.pm, + standalone/drakTermServ, standalone/drakxtv: perl_checker fixes + + * standalone/harddrake2: no gratuitously tab + + * standalone/draksplash: + - gtk+2 port + - "use strict" fixes + - perl_checker fixes + + * standalone/drakconnect: perl_checker fixes + fix gtk+2 port + +2002/12/09 adesmons + + * network/netconnect.pm: make perl_checker happy + drakconnect conf file no more uploaded with now useless variable + + * network/adsl.pm: drakconnect conf file no more uploaded with now useless + variable + +2002/12/09 Pixel <pixel@mandrakesoft.com> + + * share/themes-blackwhite.rc, share/themes.rc, share/themes-savane.rc: + remove already obsolete themes + + * my_gtk.pm, ugtk2.pm: remove dynamic theme choosing, and next/previous + (F11/F12) handling + remove code handling setstep + + * diskdrake/hd_gtk.pm, diskdrake/interactive.pm, install_interactive.pm: + - handle more locally "Reload partition table" (esp. without using + setstep) + => no exception is called through gtk + + * interactive/newt.pm, install2.pm: remove code handling setstep + + * install_steps_gtk.pm, install_messages.pm, install_steps_interactive.pm: + move long messages (like license) to a new package: install_messages.pm + + * install_gtk.pm: remove unused variable ($step_name) + remove code handling setstep + + * any.pm: remove old code + +2002/12/09 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * network/isdn.pm: remove unused modules + +2002/12/08 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt_BR.po: updated Brazilian file + +2002/12/07 alus + + * share/po/pl.po: update + update + +2002/12/07 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/sq.po: Added Albanian file + +2002/12/06 adesmons + + * network/netconnect.pm, network/tools.pm, network/modem.pm, + network/isdn.pm, network/adsl.pm: isdn data are now fetched form system + instead of drakconnect conf file + +2002/12/06 alus + + * share/po/pl.po: removed unuset texts + +2002/12/06 Guillaume Cottenceau <gc@mandrakesoft.com> + + * ugtk2.pm: don't use unless + + * c/stuff.xs.pl: add bind_textdomain_codeset, iconv the dgettext results + to UTF8 since perl seems to mess with that when trying to do so from + within gtk2-perl (with sv_utf8_upgrade) + + * install_gtk.pm: better style + + * interactive/gtk.pm: 2.1.3 doesn't have trouble with expand_to_path + + * lang.pm: perl checker OwnZ Da W3rld + misc + + * bootlook.pm: perl_checker help'ed fix + s/Gtk->/Gtk2->/ + +2002/12/06 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/et.po, share/po/vi.po: updated po file + +2002/12/06 Pixel <pixel@mandrakesoft.com> + + * network/isdn.pm, standalone/XFdrake: be more perl_checker compliant + +2002/12/05 Guillaume Cottenceau <gc@mandrakesoft.com> + + * install_gtk.pm: fix syntax & style + + * lang.pm: try to fix charset2pango_font + fix syntax & style + add bind_textdomain_codeset + + * ugtk2.pm: remove unused $_lan + +2002/12/05 Pablo Saratxaga <pablo@mandrakesoft.com> + + * standalone/harddrake2, share/po/DrakX.pot, standalone/net_monitor: Fixed + some typos or bad English + + * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, + share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, + share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, + share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, + share/po/uk.po, share/po/ko.po, share/po/sv.po, share/po/sr.po, + share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, + share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, + share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/Makefile, + share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, + share/po/zh_CN.po, share/po/vi.po, share/po/ta.po, share/po/fr.po, + share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po, + share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po, + share/po/bg.po, share/po/el.po, share/po/hu.po: updated po files + + * install_gtk.pm: two pango font names, for 10 and 12 sizes + made some functions to retrieve pango font namese from lang/charset + + * share/gen_locales.sh, share/locales-skeleton.tar.bz2: Changed the way + locale->encoding is handled; revert to the old way which was + working. + And changed the charset to use during install to UTF-8 for all but CJK + locales, + in the X11 locale config files and in lang.pm; + So, the same values of LC_* variables are used as before; but they + should + point, in glibc and in X11, to UTF-8 locales now + + * lang.pm: made some functions to retrieve pango font namese from + lang/charset + Changed the way locale->encoding is handled; revert to the old way which + was + working. + And changed the charset to use during install to UTF-8 for all but CJK + locales, + in the X11 locale config files and in lang.pm; + So, the same values of LC_* variables are used as before; but they + should + point, in glibc and in X11, to UTF-8 locales now + +2002/12/05 Pixel <pixel@mandrakesoft.com> + + * bootloader.pm: parameter passing using $_ is bad + + * any.pm: format => sub { ...} doesn't pass parameter as $_, but as $_[0] + + * printer/main.pm: $_ was not localized, fixing (and cleanup) + + * bootlook.pm: fix typo, be perl_checker compatible + packages should not "use lib qw(/usr/lib/libDrakX)" + + * partition_table.pm: replace "map $_->{normal}, @l" with "map { + $_->{normal} } @l" + (the other form is perl_checker-deprecated) + + * standalone.pm: remove unused variables or rename them with an underscore + (eg: $o becomes $_o) + +2002/12/05 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/mousedrake: gtk+2 port (how difficult it was ...) + + * network/netconnect.pm: gtk+-2 port + + * c/Makefile.PL: glib-config is obsolete now + gtk+-2 port + + * modules/interactive.pm: bug fix + + * standalone/drakTermServ, standalone/drakconnect: use gtkflush() + + * drakxtools.spec: pre gtk+2 work snapshot for mcc (mandrake_release() and + the like + + * standalone/drakgw: gtk+2 fixes + + * bootlook.pm: use gtkflush() + start gtk+2 port; perl-gtk2 is expected to implement + Gtk::Image->set_from_pixbuf() + + * standalone/drakautoinst: use gtkflush() + gtk+2 port + + * standalone/harddrake2: s/describe/describes/ + + * standalone/drakfont: fix gtk+-2 port + don't use anymore deprecated widgets + + * services.pm: drakxservices' gtk+-2 port + + * standalone/logdrake: fix gtk+2 port + +2002/12/04 adesmons + + * network/netconnect.pm, network/tools.pm, network/network.pm, + network/modem.pm: More data are now fetched from system instead of + drakconnect conf file + +2002/12/04 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/locales-skeleton.tar.bz2: added recognition of locale named + "en_US.UTF-8" + + * lang.pm: made 'en_US.UTF-8' the default locale for LC_* varaibles during + isntall + + * share/fonts.tar.bz2: Put Nimbus Sans L as default font + put back the default iso8859-15 fonts used by install.rc + + * install_gtk.pm: put "Nimbus Sans L" as used font + try of Gtk2 font definitions + +2002/12/04 Pixel <pixel@mandrakesoft.com> + + * network/adsl.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + syntax changes to make perl_checker happy + + * install_steps.pm: remove unused code (installCrypto) + remove unused variables or rename them with an underscore (eg: $o + becomes $_o) + do not use "local *F" + + * install_steps_interactive.pm, install2.pm: remove unused code + (installCrypto) + remove unused variables or rename them with an underscore (eg: $o + becomes $_o) + + * interactive.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + "require log" causes some pb, perl thinking that "log" is the log() + function. So replace it with require 'log.pm' (perl_checker will handle + this) + + * fsedit.pm: remove unused variables or rename them with an underscore + (eg: $o becomes $_o) + use if_() where possible (as reported by perl_checker) + don't use "local *F" + + * interactive/stdio.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + fix typo + + * crypto.pm: use if_() where possible (as reported by perl_checker) + + * my_gtk.pm, ugtk.pm, printer/printerdrake.pm, ugtk2.pm, + install_steps_gtk.pm, printer/main.pm, fs.pm, bootloader.pm: remove + unused variables or rename them with an underscore (eg: $o becomes $_o) + use if_() where possible (as reported by perl_checker) + + * scanner.pm: remove unused variables or rename them with an underscore + (eg: $o becomes $_o) + $prefix is no good, replace it with $::prefix + + * partition_table/dos.pm, partition_table/sun.pm, partition_table/bsd.pm, + partition_table/empty.pm, keyboard.pm, partition_table/lvm_PV.pm: do not + use "local *F" + + * printer/office.pm, Xconfig/parse.pm, network/smb.pm, mouse.pm, + resize_fat/io.pm, Xconfig/xfree4.pm, network/drakfirewall.pm, + Xconfig/main.pm, diskdrake/smbnfs_gtk.pm, partition_table.pm, + printer/common.pm, diskdrake/interactive.pm, pkgs.pm, + install_steps_auto_install.pm, diskdrake/hd_gtk.pm, Xconfig/monitor.pm, + install_any.pm, diskdrake/removable.pm, network/isdn.pm, swap.pm, + resize_fat/directory.pm, devices.pm, commands.pm, + install_interactive.pm, printer/gimp.pm, any.pm, interactive/http.pm, + printer/detect.pm, ftp.pm, services.pm, interactive/newt.pm, + resize_fat/dir_entry.pm, network/ethernet.pm, + Xconfig/resolution_and_depth.pm, Xconfig/test.pm, diskdrake/dav.pm, + network/smbnfs.pm, interactive/gtk.pm, network/nfs.pm: remove unused + variables or rename them with an underscore (eg: $o becomes $_o) + + * standalone.pm: no need to "require common", it is "use"d + "require log" causes some pb, perl thinking that "log" is the log() + function. So replace it with require 'log.pm' (perl_checker will handle + this) + + * network/tools.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + my' variables as needed + + * security/main.pm, network/modem.pm: remove unused variables or rename + them with an underscore (eg: $o becomes $_o) + syntax changes to make perl_checker happy + syntax changes to make perl_checker happy + + * network/network.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + syntax changes to make perl_checker happy + use if_() where possible (as reported by perl_checker) + + * network/netconnect.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + - %l is not used, so why declare it?? + - in network::netconnect::main(), declare @l as it should be. But the + code is really wrong, it NEEDS fixing (bis) + syntax changes to make perl_checker happy + use if_() where possible (as reported by perl_checker) + syntax changes to make perl_checker happy + + * partition_table/mac.pm, modules.pm, partition_table/raw.pm, loopback.pm: + remove unused variables or rename them with an underscore (eg: $o + becomes $_o) + do not use "local *F" + + * partition_table/gpt.pm: remove unused variables or rename them with an + underscore (eg: $o becomes $_o) + fix typo ($hd is not available in read_header(), so don't use it) + do not use "local *F" + +2002/12/04 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/harddrake2: + - free objects non freeed by gtk+ (the eternal gobject vs boxed types + debat) + - remove dead code + - use ->append_set() everywhere + - strip again vendor name from displayed string (aka keep only the + model description) + - enfoce pixel style : remove () from method calls + + * harddrake/data.pm: display "cpu #<XX>: <name>" for cpus + + * harddrake/TODO: update + +2002/12/04 Pixel <pixel@mandrakesoft.com> + + * install_steps_gtk.pm: use option tty7 to force X server to be on tty7 + (instead of opening tty5 and + tty6 so that the next available tty is tty7) + +2002/12/04 uid580 + + * harddrake/ui.pm: kill "used by only one" harddrake::ui module, + move its content to standalone/harddrake2 + cleanups + hide config buttons when switching from a configurable device to a non + configurable one + fix gtktext_insert() usage + gtk+2 port, yeah baby :-) + + * security/main.pm: share common options + + * pkgs.pm: perl_checker + + * standalone/harddrake2, harddrake/data.pm: kill "used by only one" + harddrake::ui module, + move its content to standalone/harddrake2 + + * standalone/drakxservices: strict mode + + * ugtk2.pm: reverse + clean up + + * security/msec.pm: + - fix obvious pixel typo (s/if/if_/) + - no need to maintain dummy documentation about something which is + called only in one place + - simplify + +2002/12/03 dam's <dams@idm.fr> + + * any.pm: allow #, and other characters in phone number + +2002/12/03 Guillaume Cottenceau <gc@mandrakesoft.com> + + * mdk-stage1/network.c: gcsux + + * pkgs.pm, network/tools.pm: make it $::testing aware + + * ugtk2.pm: misc fixes + + * interactive/gtk.pm, diskdrake/hd_gtk.pm, install_steps_gtk.pm, mouse.pm, + services.pm, install_gtk.pm, diskdrake/smbnfs_gtk.pm: gtk2 + +2002/12/03 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/et.po, share/po/ja.po, share/po/vi.po: updated Estonian and + Vietnamese files; fixed typo in Japanese file + +2002/12/03 Pixel <pixel@mandrakesoft.com> + + * raid.pm: use output() + + * network/tools.pm: cleanup use of filehandles + + * detect_devices.pm: do not use "local my $F, ...", use "local(my $F, ...) + instead + do not use "local *F", use run_program::get_stdout() or "local $F" + instead + + * scanner.pm, install_any.pm, timezone.pm, partition_table.pm: do not use + "local *F", use "my $F" or output() instead + + * install_steps.pm: do not use "local my $F, ...", use "local(my $F, ...) + instead + + * network/network.pm (read_resolv_conf): simplify + + * Xconfig/test.pm, devices.pm: do not use "local my $F, ...", use + "local(my $F, ...) instead + do not use "local *F" + + * commands.pm: do not use "local my $F, ...", use "local(my $F, ...) + instead + remove pack_ and unpack_ (unused) + + * security/msec.pm: fix typo + simplify (esp. use cat_) + (get_value): cleanup + + * fs.pm: one need run_program::raw() to use options + + * common.pm: do not use "local my $F, ...", use "local(my $F, ...) instead + (formatXiB): simplify + use "my $F" instead of "local *F" (and cleanup) + + * network/nfs.pm (find_exports): use run_program::raw + stdout + +2002/12/03 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/logdrake, ugtk2.pm: add gtktext_append() and uses it + +2002/12/03 Guillaume Cottenceau <gc@mandrakesoft.com> + + * common.pm, c/stuff.xs.pl: workaround perl sprintf bug when some + parameters are utf8 and some not + + * ugtk2.pm: titisux, revert the pango pixels stuff + +2002/12/03 uid551 + + * share/fonts.tar.bz2: First try of fonts for Xft2 + + * share/po/zh_CN.po, share/po/pt_BR.po: updated Brazilian and Chinese + files + +2002/12/02 adesmons + + * network/netconnect.pm, network/network.pm, network/modem.pm, + standalone/drakconnect, network/adsl.pm: Some data are now fetched from + system instead of drakconnect conf file (adsl, ppp, ifcfg-eth) + +2002/12/02 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, + share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, + share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, + share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, + share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, + share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, + share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, + share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, + share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, + share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po, + share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, + share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, + share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated + pot file + +2002/12/02 Pixel <pixel@mandrakesoft.com> + + * standalone/adduserdrake: remove commented code + + * proxy.pm: this package is unused, no need to keep it + + * install_steps.pm: use output_with_perm() + use $::prefix + any::runlevel() doesnt need the prefix anymore + + * Xconfig/card.pm: don't use $_ + + * bootloader.pm: use output() + + * fs.pm: formatting timeout is now 1 hour + remove the duplicate mke2fs (fixes buggy 1.225 change) + use append_to_file() + + * install_steps_interactive.pm: any::get_autologin() doesnt modify $o, it + returns a hash + use $::prefix + + * network/network.pm (add2hosts): use output and pixelization + + * any.pm: use output_with_perm() + any::get_autologin() doesnt modify $o, it returns a hash + use $::prefix + (get_autologin): $o->{autologin} is set to the chosen user only if + AUTOLOGIN is set (it now mirrors what set_autologin() does) + any::runlevel() doesnt need the prefix anymore + use output and append_to_file + + * common.pm (set_alternative): simplify + (files_exist): simplify + + * Xconfig/main.pm: any::runlevel() doesnt need the prefix anymore + + * Xconfig/various.pm: + - any::runlevel() doesnt need the prefix anymore + - fix use of any:runlevel() + + * printer/main.pm, printer/office.pm: simplify + + * network/isdn.pm, network/netconnect.pm, mouse.pm, network/smb.pm, + network/tools.pm: use output_with_perm() + + * Makefile: adapt "make test_pms" to new perl_checker + + * bootlook.pm: + - use any::get_autologin and any::set_autologin + - any::set_autologin doesn't set /etc/sysconfig/autologin to perm 600, + is it needed?? + use any::runlevel() + +2002/12/02 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/drakbug: fix gtk2 port + + * standalone/logdrake: make append option be usable as other ones + use named tags for color rather than rgbt triplet, + waiting for full foreground-gdk support in perl-gtk2 + - gtk2 port + - add a note to remember to try gtkhtml instead of TextView + - make wait message be transcient and modal (we should share some + create_*_dialog() around logdrake/mcc/drakfloppy/rpmdrake) + - fixes for 'strict ref' + + * security/main.pm, standalone/drakbackup, standalone/drakconnect: + - gtk2 port + - perl_checker fixes + + * standalone/drakgw: + - fix gtk2 port + - let it work with kernel 2.5 too + + * docs/porting-ugtk: add a tool to ease gtk2 port. + this is not the rule of thumb but basic stuff. + + * standalone/drakTermServ, standalone/drakfont: + - gtk2 port + - consolidate some code in text_view() + - perl_checker fixes + + * ugtk2.pm: make append option be usable as other ones + gtkfontinfo() is bugged since it uses a C macro which is + (oh surprise) not in binary library .... : + $fontinfo{$_} = Gtk2::Pango->PANGO_PIXELS($metrics->$func); + - use useless when needed + - gtktext_insert() : add an append argument to prevent overwriting + already present text in TextBuffer + - gtkfontinfo() is bugged since it uses a C macro which is + (oh surprise) not in binary library .... : + $fontinfo{$_} = Gtk2::Pango->PANGO_PIXELS($metrics->$func); + +2002/11/28 Guillaume Cottenceau <gc@mandrakesoft.com> + + * raid.pm: testing aware + + * any.pm: load_category__prompt: use formatAlaTeX + +2002/11/28 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/et.po: Updated Estonian file + + * share/po/pt.po: Updated Portuguese file + +2002/11/28 Pixel <pixel@mandrakesoft.com> + + * commands.pm: fix "ps" and "df" (were broken due to localization of *DF + and *PS) + + * bootlook.pm, network/adsl.pm, printer/printerdrake.pm: perl_checker + adaptations + perl_checker adaptations + + * resize_fat/c_rewritten.pm: to export, one needs to inheritate from + Exporter + + * resize_fat/io.pm: perl_checker adaptations + remove debug code + + * Makefile: fix removing of pods when installing pms + + * printer/cups.pm, any.pm, install_steps_gtk.pm, printer/main.pm, + printer/detect.pm, printer/common.pm, network/network.pm, ftp.pm, + services.pm, ugtk.pm, network/isdn.pm, network/ethernet.pm, + resize_fat/fat.pm, install_steps_interactive.pm, network/netconnect.pm, + lang.pm, network/tools.pm, install_any.pm, printer/gimp.pm, + partition_table.pm, harddrake/ui.pm: perl_checker adaptations + + * Xconfig/test.pm: in the test snippet, add "use common" to have access to + N() + + * bootloader.pm: + - compare labels case insensitively (thanks to D.Faure) + - when reading existing config, remove double quotes around the label + (thanks to D.Faure) + - add double quotes around the label instead of removing spaces (need + checking installkernel compatibility) + perl_checker adaptations + +2002/11/28 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * services.pm: + - my_gtk->main already do the kill 'USR2' + and hardcoding signal number was bad anyway + - use gtkflush() + - my_gtk->main already do the kill 'USR2' + and hardcoding signal number was bad anyway + - use gtkflush() + + * standalone/drakperm: one more fix + - "use strict" fixes + - perl_checker fixes + + * standalone/drakgw: fix + + * ugtk2.pm: perl_checker fixes + fix create_factory_menu*(): since we get an object and not anymore a + hash, let just return factory as another variable... + +2002/11/27 Guillaume Cottenceau <gc@mandrakesoft.com> + + * ugtk2.pm: reflect calling style change of PANGO_PIXELS + +2002/11/27 Pixel <pixel@mandrakesoft.com> + + * printer/main.pm: perl_checker adaptations + (configure_hpoj): functions dynamically loaded from /usr/sbin/ptal-init + are + now loaded in printer::hpoj namespace (needs testing) + + * .perl_checker: update for new packages (Gtk2), and remove the + now-handled-by-perl_check packages + + * Xconfig/card.pm, bootlook.pm, network/network.pm, log.pm, + printer/office.pm, help.pm, scanner.pm, install_steps.pm, + Xconfig/parse.pm, install_gtk.pm, network/isdn.pm, interactive.pm, + my_gtk.pm, swap.pm, resize_fat/fat.pm, partition_table/gpt.pm, + Newt/Newt.pm, resize_fat/c_rewritten.pm, mouse.pm, resize_fat/io.pm, + standalone.pm, lang.pm, devices.pm, install2.pm, commands.pm, + install_interactive.pm, printer/gimp.pm, partition_table.pm, + Xconfig/xfree3.pm, any.pm, install_steps_gtk.pm, printer/detect.pm, + interactive/http.pm, diskdrake/interactive.pm, ftp.pm, + interactive/stdio.pm, interactive/newt.pm, harddrake/sound.pm, fs.pm, + ugtk.pm, network/ethernet.pm, Xconfig/resolution_and_depth.pm, + bootloader.pm, Xconfig/test.pm, harddrake/data.pm, Xconfig/monitor.pm, + network/adsl.pm, fsedit.pm, modules.pm, network/tools.pm, + network/isdn_consts.pm, install_any.pm, printer/printerdrake.pm, + timezone.pm, harddrake/ui.pm, c/stuff.pm: perl_checker adaptations + +2002/11/27 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/drakgw: + - Gtk2 port + - perl_checker fixes + + * standalone/drakbug: + - Gtk2 port + - one perl_checker fix + + * standalone/mousedrake: restore previous behaviour and exit early only in + cancel case + fix bad interaction between mcc & mousedrake. + interactive already take care of it through my_gtk... + +2002/11/26 gbeauchesne + + * install_any.pm: Only all.img is currently used on x86-64, ia64 and ppc. + Therefore, don't + complain nor try to stat some cdrom.img on first CD. + +2002/11/26 Guillaume Cottenceau <gc@mandrakesoft.com> + + * unused/demo-frozen-bubble.patch: forgot to commit it (.cvsignore + containing * doesn't help) + + * ugtk2.pm: fix typo (gtkstring_size) thx to perl checker + fix shadow bug due to wrong extraction of allocation data + two small fixes + add + + * Makefile: ugtk2.pm is temporarily not in drakxtools but in perl-GTK2 + +2002/11/26 Pablo Saratxaga <pablo@mandrakesoft.com> + + * lang.pm: changed values for console font when en_US is chosen + + * share/po/pt.po, share/po/pt_BR.po: Updated Portuguese files + +2002/11/26 Pixel <pixel@mandrakesoft.com> + + * interactive.pm, standalone.pm: no need to call common::backtrace(), use + directly backtrace() (was it written that way to workaround a bug in old + perl_checker?) + + * ugtk2.pm: make perl_checker happy + + * diskdrake/removable_gtk.pm: fix undeclared variable + +2002/11/26 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * printer/main.pm: simplify some stuff + + * harddrake/data.pm: fix eating too much items + + * modules.pm, printer/detect.pm, run_program.pm, services.pm: perl_checker + fixes + + * printer/printerdrake.pm: miaouh + simplify + +2002/11/25 François Pons <fpons@mandrakesoft.com> + + * tools/oem-prepare: assume any hardware is found (forget to commit). + + * rescue/tree/etc/oem-all: synced with latest change to HP version (and + now HP is in CVS). + + * network/netconnect.pm: removed old code (commented out). + + * diskdrake/interactive.pm: revert previous change useless (another + problem). + added a trailing true value for perl being happy. + + * network/ethernet.pm: add support ADIModem. + removed reference to ...->{nb_cards} no more used. + removed 2 labels and 2 gotos by a very simple while, dam's is really + great + sometimes ;-) + + * network/adsl.pm: add support for Sagem USB Modem (for free.fr ;-)) + + * network/network.pm: added is_domain_name that checks validity of a + domain name. + + * detect_devices.pm: add getSagem() to detect Sagem USB ADSL Modem. + + * install_any.pm: fixes perl-checker importation of bug, getFile is + complex for perl newbies, do + not rely on perl-checker for trying to "fix" it else it won't run + anymore ;-) + make it work (changed *F => *GETFILE and added a return) else perl has + some + problem using it as reference to file handle. + + * mdk-stage1/dietlibc/include/sys/mount.h: fixes for new kernel headers + (It should problably be kernel-headers to be + modified but it is *much* faster to modify yoyotte's works). + +2002/11/25 Pixel <pixel@mandrakesoft.com> + + * pkgs.pm: fix typo (openInstallLog *must* return the filehandle) + don't use filehandle *pkgs::LOG, use a my'ed $LOG + since we use the "fileno", perl doesn't know we're still using the + filehandle, and so closes it, and :-( + + * network/netconnect.pm: in network::netconnect::main(), declare @l as it + should be. But the code is really wrong, it NEEDS fixing + $modem is redefined 2 lines below its first declaration. this first + declaration is useless (??) + + * standalone/diskdrake: oops, didn't see titi modified option handling + fix handling of options --expert and --testing + + * install_any.pm: use a scalar instead of a typeglob (let typeglobs be + deprecated!) + + * lang.pm: fix handling of "all" languages selected + + * network/isdn.pm: since $mouse is undefined, replace it with undef (??) + + * diskdrake/interactive.pm: make perl_checker happy + + * network/tools.pm: + - $up was my-ed inside the if-then block though it was used outside + the block (hint: buggy code) + - my @country as it should be + +2002/11/25 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone.pm: + - simplify --embedded handling + - stricter matching on --no-autoc + + * ugtk.pm: + - simplify mcc stuff + - prevent bad stacking of right icons in mcc at startup + + * detect_devices.pm: remove dobles + + * my_gtk.pm: warn about broken programs that misuse my_gtk + display in mcc when embedded only when ready to interact with the user + + * harddrake/ui.pm: interactive->exit call my_gtk->exit which destroy the + window + + * common.pm, standalone/drakbug, standalone/drakbug_report: + s/mdk_rel/mandrake_release/ + consolidate some stuff from standalone tools & mcc into mdk_rel() + +2002/11/22 François Pons <fpons@mandrakesoft.com> + + * mouse.pm: incorporate 8.2 HP fixes back in cooker. + +2002/11/21 Guillaume Cottenceau <gc@mandrakesoft.com> + + * standalone/drakautoinst: use ask_warn when I should, and remove a one + year old debug statement (???) + +2002/11/21 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/net_monitor: switch latest tools that still manually handle + embedding + to use my_gtk + - perl_checker fixes + - use my_gtk to transparently handle embedding + + * standalone/drakproxy: this one requires any + + * standalone/drakbug: + - Gtk::Gdk::ImlibImage is not needed + - perl_checker fixes + - fix interactive exit (s/in/$in/ ->exit) + + * standalone/drakfont, standalone/drakconnect, standalone/drakTermServ, + standalone/drakgw: switch latest tools that still manually handle + embedding + to use my_gtk + + * standalone/drakbackup: switch latest tools that still manually handle + embedding + to use my_gtk + remove dead code about option managment which is + obsoleted by standalone + +2002/11/20 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/ui.pm: hide the "please wait" at the latest stage + + * ugtk.pm: + - api change for latest harddrake + - s/$x ne ''/$x/ + + * security/msec.pm: simplify + cleanups + + * printer/printerdrake.pm: cleanups + update to new security::level scheme + + * standalone/drakbackup: message_noconf_box() and message_underdevel() + were quite + identical. let consolidate them + message_noselect_box() and message_noselect_what_box() were just + identical (but for their label). + let consolidate this + send_mail_pb() and client_ftp_pb() were just identical (modulo their + label) + kill heavy duplication in get_cd_info() + perl_checker fixes + - don't gratuitously copy a 70 lines help text with typo changes, + translators will kill us + - use strict, fix it + s/$x ne (0|'')/$x/ + + * standalone/logdrake: do not use print_hello() callback, anyway it does + not exists (but in + drakfloppy ...) + - logdrake does not need any + - use ugtk for gtkcolor & co + - perl_checker fixes + + * standalone/draksec, standalone/service_harddrake, standalone/drakgw, + standalone/draksound: perl_checker fixes + + * standalone/draksplash: perl_checker fixes + - fixes for "use strict" (still some work to do since some variables + are created through ${ $x.$y } + - use my_gtk : + o clean code + o transparently manage embedding + + - perl_checker fixes + + * standalone/drakproxy, standalone/drakupdate_fstab: fix blind copyright + copy + + * interactive/stdio.pm, standalone/drakbug, standalone/drakTermServ: s/$x + ne (0|'')/$x/ + + * standalone/drakfloppy: perl_checker fixes + more perl_checker fixes + - don't require unused modules + - use my_gtk to transparently handle embedding + - fixes for strict mode + - fixes for perl_checker (more to come after lunch) + + * bootlook.pm: this is a module, not a program + +2002/11/19 Frederic Lepied <flepied@mandrakesoft.com> + + * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, + share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po, + share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, + share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, + share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, + share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, + share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, + share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, + share/po/af.po, network/ethernet.pm, share/po/az.po, share/po/zh_TW.po, + standalone/drakconnect, share/po/zh_CN.po, share/po/pt.po, + share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/it.po, + share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, + share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, + share/po/lv.po, share/po/hu.po: default dhcp client is dhcp-client + +2002/11/19 gbeauchesne + + * mdk-stage1/log.c: Don't forget to va_end() what was va_copy()'ed. + +2002/11/19 Pablo Saratxaga <pablo@mandrakesoft.com> + + * keyboard.pm, share/keyboards.tar.bz2: Added Malayalam keyboard + + * share/po/fi.po: updated Finnish file + +2002/11/19 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * security/main.pm, any.pm, security/level.pm, install_steps.pm: + - fix duplication of sec level setting: + merge any::get_secure_level() with + secure::msec::get_secure_level() + - move security level functions from secure::msec + to secure::level + - uses secure::level in install_steps + - fix duplication of security level labels + - draksec: use same strings in drakx, got nice + translations + - get_default_checks(): make it more readable + + * mouse.pm: perldoc: explain basic usage of mouse.pm, regarding + problems that show up in early interaction between + harddrake::data and mouse + + * harddrake/ui.pm: + - remove debugging code + - document menu building + - add option menu check boxes to prevent (slowly) detecting + printers and modems + - remove warnings on usb devices + - explains more cpu bugs + - eventually fix --testing effect + --testing handling was erronously reverted + + * security/msec.pm: + - fix duplication of sec level setting: + merge any::get_secure_level() with + secure::msec::get_secure_level() + - move security level functions from secure::msec + to secure::level + - uses secure::level in install_steps + - fix duplication of security level labels + - draksec: use same strings in drakx, got nice + translations + - get_default_checks(): make it more readable + previous example in perldoc was buggy; + put one that really works + + * diskdrake/hd_gtk.pm, diskdrake/interactive.pm: make perldoc working + + * harddrake/data.pm: don't display two times some usb mice + + * help.pm: one can now alter settings there + +2002/11/18 Pixel <pixel@mandrakesoft.com> + + * network/netconnect.pm, Xconfig/card.pm, bootlook.pm, printer/main.pm, + printer/detect.pm, Xconfig/monitor.pm, network/adsl.pm, standalone.pm, + pkgs.pm, harddrake/sound.pm, printer/office.pm, network/isdn.pm, + printer/printerdrake.pm, printer/gimp.pm, harddrake/ui.pm: make + perl_checker happy + +2002/11/18 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/net_monitor, standalone/drakfont: drakbug, drakfont, + drakperm, draksplash, drakxtv, harddrake2, + net_monitor : final update for common cli options/help manager + update copyright years + + * harddrake/TODO: final switch of drakbackup, logdrake and scannerdrake + to new option scheme + + * standalone/adduserdrake, standalone/drakxservices, standalone/livedrake, + standalone/keyboarddrake, standalone/drakboot, standalone/mousedrake, + standalone/drakconnect, standalone/draksound: + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + + * standalone/draksplash, standalone/harddrake2, standalone/drakbug, + standalone/drakperm: drakbug, drakfont, drakperm, draksplash, drakxtv, + harddrake2, + net_monitor : final update for common cli options/help manager + + * drakxtools.spec: 9.1-0.2dmk + + * standalone/drakautoinst, standalone/printerdrake, standalone/XFdrake, + standalone/drakgw: + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + update copyright years + + * standalone/drakfloppy: + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + remove old dead commented i18n code that kept being copied around + + * standalone/diskdrake: final switch of drakbackup, logdrake and + scannerdrake + to new option scheme + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + update copyright years + + * standalone/logdrake: final switch of drakbackup, logdrake and + scannerdrake + to new option scheme + update copyright years + - clean code sot that it runs under "use strict" + - simplify date command construction, this is basic perl :-( + - kill dead old commented code to handle i18n instead of relying on + common shared modules + remove old dead commented i18n code that kept being copied around + + * modparm.pm, modules/parameters.pm, modules/interactive.pm, any.pm: + rename modparm as modules::parameters + + * standalone.pm: drakbug, drakfont, drakperm, draksplash, drakxtv, + harddrake2, + net_monitor : final update for common cli options/help manager + typo fix + switch drakTermServ to new option scheme + rename modparm as modules::parameters + final switch of drakbackup, logdrake and scannerdrake + to new option scheme + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + + * standalone/drakxtv: drakbug, drakfont, drakperm, draksplash, drakxtv, + harddrake2, + net_monitor : final update for common cli options/help manager + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + + * bootlook.pm: switch to new help/options scheme + update copyright years + + * harddrake/ui.pm: + - standalone.pm : + o make it be 'use strict' aware + o factorize options managment in one place + - standalone tools : + o they all now support -h|--help -v|--version, ... + o they can add their own options to %standalone::usages + - harddrake : use std --testing/$::testing rather than its own + --test option + simplify code though my_gtk::gtkcolor + + * standalone/drakTermServ: switch drakTermServ to new option scheme + + * standalone/drakbackup, standalone/scannerdrake: final switch of + drakbackup, logdrake and scannerdrake + to new option scheme + update copyright years + + * scanner.pm, standalone/drakproxy, security/msec.pm, + printer/printerdrake.pm: update copyright years + +2002/11/17 alus + + * share/po/pl.po: fix + +2002/11/16 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/zh_CN.po, share/po/pt.po: updated Portuguese and Chinese files + +2002/11/15 Pixel <pixel@mandrakesoft.com> + + * any.pm, run_program.pm, interactive.pm, c.pm, ftp.pm: + s/wantarray/wantarray()/ + +2002/11/15 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * Xconfig/monitor.pm: perl_checker fix + + * harddrake/data.pm: s/usbvideo/usbvision/ + + * standalone/drakxtv: typo fix + + * printer/printerdrake.pm: + - more cleanups + - don't display messages if we're not going to remove/install some + packages + cleanups + cleanups + printerdrake::install_spooler() : fix heavy duplication of code + by using %spoolers data structure (function shrunked by 66%) + consolidate some stuff into printer::data::spoolers{XXX}{alternatives} + so that all alternatives get centralized in one data structure + cleanups + + * printer/data.pm: printerdrake::install_spooler() : fix heavy duplication + of code + by using %spoolers data structure (function shrunked by 66%) + consolidate some stuff into printer::data::spoolers{XXX}{alternatives} + so that all alternatives get centralized in one data structure + + * security/main.pm: + - use run_program rather than raw system + - kill useless show_msec_help() + - kill commented remanant code of help buttons + - add tooltip with default values on combos & entries + - log about security administrator changes only when we do some + - factorize some code into new_editable_combo() and + set_default_tip() + + * Makefile.config, drakxtools.spec, harddrake/sound.pm, + Makefile.drakxtools: + - add missing printer directory + - bump version to 9.1 like most of our packages + +2002/11/14 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/ro.po: updated Romanian file + + * standalone/drakfont: Make drakfont use ttmkfdir again, as it recognizes + more encodings, + use of parameter "-u" of ttmkfdir to always output unicode entries, + call xftcache to create/update the Xftcache files (used by Xft), + rewrite fonts.dir (with ttmkfdir) when removing a ttf file so it no + longer appears on the font list, and execute "xset fp rehash" after + adding/removing fonts, so the font list used by X server is + synchronized. + +2002/11/14 Pixel <pixel@mandrakesoft.com> + + * printer/cups.pm, bootlook.pm, network/network.pm, resize_fat/main.pm, + printer/office.pm, partition_table/dos.pm, scanner.pm, unused/scsi.pm, + my_gtk.pm, swap.pm, install_steps_interactive.pm, Xconfig/xfreeX.pm, + network/smb.pm, devices.pm, crypto.pm, commands.pm, printer/gimp.pm, + any.pm, install_steps_gtk.pm, printer/main.pm, printer/detect.pm, + interactive/stdio.pm, interactive/newt.pm, fs.pm, + resize_fat/dir_entry.pm, ugtk.pm, run_program.pm, bootloader.pm, + steps.pm, harddrake/data.pm, diskdrake/hd_gtk.pm, interactive/gtk.pm, + detect_devices.pm, network/tools.pm, install_any.pm, + printer/printerdrake.pm, harddrake/ui.pm: + - add/remove spaces to make perl_checker happy + - remove redundant parentheses + - add some parentheses for clarity + + * partition_table/mac.pm, ftp.pm, pkgs.pm: make perl_checker happy + - add/remove spaces to make perl_checker happy + - remove redundant parentheses + - add some parentheses for clarity + + * partition_table/gpt.pm, partition_table/raw.pm, partition_table.pm: make + perl_checker happy + +2002/11/14 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/v4l.pm: resync with bttv-0.7.100 and saa7134-0.2.2snapshot + + * drakxtools.spec: 1.1.12-1mdk + + * security/main.pm: + - kill unused myexit() + - perl_checker fixes + + * printer/main.pm, printer/data.pm, printer/STATUS, printer/office.pm, + printer/gimp.pm: + - printer::data : export all data structures + - cleanups + - all code is now runnable in strict mode + + * security/msec.pm: + - perl_checker fixes + - clean code + - simplify config_function() + + * harddrake/ui.pm: explain the detect() vs new() delayed gui construction + when embedded + display port for network printers too + +2002/11/13 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/sk.po, share/po/ru.po: updated Slovak and Russian files + +2002/11/13 Pixel <pixel@mandrakesoft.com> + + * printer/common.pm: fix syntax error + + * Xconfig/various.pm, http.pm, network/network.pm, network/modem.pm, + resize_fat/main.pm, install_gtk.pm, interactive.pm, my_gtk.pm, mouse.pm, + printer/data.pm, devices.pm, lang.pm, install2.pm, install_steps_gtk.pm, + interactive/http.pm, partition_table/mac.pm, pkgs.pm, + interactive/newt.pm, network/ethernet.pm, standalone/XFdrake, steps.pm, + harddrake/data.pm, keyboard.pm, network/adsl.pm, fsedit.pm, + install_any.pm, harddrake/ui.pm: add/remove spaces to make perl_checker + happy + + * bootlook.pm, printer/office.pm, scanner.pm, install_steps.pm, + network/isdn.pm, install_steps_interactive.pm, network/netconnect.pm, + harddrake/v4l.pm, printer/main.pm, harddrake/sound.pm, ugtk.pm, + network/tools.pm, printer/printerdrake.pm: add/remove spaces to make + perl_checker happy + add/remove spaces to make perl_checker happy + +2002/11/13 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * printer/printerdrake.pm: simplify install_spooler() but there's still + lot of duplication there + (some work for tomorow) + - final switch to $::prefix + - simplify main::get_copiable_queues(), main::setcupslink() + - s/unless (X ne Y)/if (X eq Y)/ + - set_usermode() : ensure we add the line if it didn't exists + + * harddrake/ui.pm: display floppy driver type as well as mouse type + + * printer/office.pm: fix files lookup + printer::common: export function + + * printer/gimp.pm: don't reinvent the wheel, use common + + * detect_devices.pm: fix vendor/model spliting when there's neither space + nor separator + + * printer/common.pm: printer::common: export function + + * printer/main.pm: + - final switch to $::prefix + - simplify main::get_copiable_queues(), main::setcupslink() + - s/unless (X ne Y)/if (X eq Y)/ + - set_usermode() : ensure we add the line if it didn't exists + - set_usermode() : don't reinvent the wheel, use substInFile + - get_usermode() : ditto, use getVarsFromSh + + * drakxtools.spec: pixel neither know how to update cvs nor comitting its + changes + +2002/11/12 erwan + + * mdk-stage1/network.c, mdk-stage1/stage1.h: Cleaning old stuff + +2002/11/12 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/da.po: updated Danish file + +2002/11/12 Pixel <pixel@mandrakesoft.com> + + * security/main.pm, bootlook.pm, printer/main.pm, printer/detect.pm, + partition_table/mac.pm, diskdrake/interactive.pm, pkgs.pm, services.pm, + printer/office.pm, ugtk.pm, run_program.pm, + install_steps_auto_install.pm, bootloader.pm, standalone/XFdrake, + network/netconnect.pm, lang.pm, install2.pm, modules.pm, commands.pm, + printer/printerdrake.pm, printer/gimp.pm, partition_table.pm: add/remove + some spaces to make perl_checker happy + + * diskdrake/removable_gtk.pm: add "use common" for N() + +2002/11/12 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * printer/main.pm: kill set_prefix() + printer related modules cleaning : + - create the printer/ hierarchy + - split services related stuff into services.pm & printer::services, + + - move things that've nothing to do with printers into common.pm + (alternatives, permissions, ...) + + - move eveything related to cups, gimp-print, detection, + {star,open}office to the corresponding splited printer:: module + + - big consolidation of printer::office (it was obvious there were tons + of duplication between staroffice and openoffice managment) + + - move other stuff into printer::main, printer::common, + + status : print.pm has been heavily splited (now one can begin to + understand the little bits). + printerdrake still needs to be splited/cleaned and eventually removed + since printer/printerdrake modules separation is not understandable by + other people + + till, in printer::gimp, $lprcommand is neither declared nor setted + nowhere. idem in mdk9.0 ... + + * security/main.pm: fix _() -> N() conversion + + * install_steps_interactive.pm: resync with latest printerdrake + + * printer/printerdrake.pm: fix getSNMPModel() location + printer related modules cleaning : + - create the printer/ hierarchy + - split services related stuff into services.pm & printer::services, + + - move things that've nothing to do with printers into common.pm + (alternatives, permissions, ...) + + - move eveything related to cups, gimp-print, detection, + {star,open}office to the corresponding splited printer:: module + + - big consolidation of printer::office (it was obvious there were tons + of duplication between staroffice and openoffice managment) + + - move other stuff into printer::main, printer::common, + + status : print.pm has been heavily splited (now one can begin to + understand the little bits). + printerdrake still needs to be splited/cleaned and eventually removed + since printer/printerdrake modules separation is not understandable by + other people + + till, in printer::gimp, $lprcommand is neither declared nor setted + nowhere. idem in mdk9.0 ... + + * drakxtools.spec: 1.1.12-1mdk + + * printer/cups.pm, printer/detect.pm, printer/common.pm, + standalone/printerdrake, services.pm, printer/office.pm, + printer/default.pm, printer.pm, printer/data.pm, common.pm, + printer/services.pm, printerdrake.pm, printer/gimp.pm: printer related + modules cleaning : + - create the printer/ hierarchy + - split services related stuff into services.pm & printer::services, + + - move things that've nothing to do with printers into common.pm + (alternatives, permissions, ...) + + - move eveything related to cups, gimp-print, detection, + {star,open}office to the corresponding splited printer:: module + + - big consolidation of printer::office (it was obvious there were tons + of duplication between staroffice and openoffice managment) + + - move other stuff into printer::main, printer::common, + + status : print.pm has been heavily splited (now one can begin to + understand the little bits). + printerdrake still needs to be splited/cleaned and eventually removed + since printer/printerdrake modules separation is not understandable by + other people + + till, in printer::gimp, $lprcommand is neither declared nor setted + nowhere. idem in mdk9.0 ... + + * standalone/drakxtv: don't offer to configure kernel for usbvision (no + option for now) + handle devices managed by usbvision too + + * install_steps.pm: update for new printerdrake + + * harddrake/data.pm: resync with printerdrake + handle devices managed by usbvision too + exclude more usb mice from unknown devices + +2002/11/11 alus + + * share/po/pl.po: updated + +2002/11/11 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/vi.po, share/po/ru.po: updated Russian and Vietnamese files + +2002/11/11 Pixel <pixel@mandrakesoft.com> + + * security/msec.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + - use "foreach" instead of "for" in list context + - use "for" instead of "foreach" when used a la C + various small syntax enhancements to please perl_checker + + * partition_table/sun.pm: + - use "foreach" instead of "for" in list context + - use "for" instead of "foreach" when used a la C + + * Xconfig/card.pm, bootlook.pm, my_gtk.pm, network/netconnect.pm, + harddrake/data.pm, network/tools.pm, install_any.pm, security/main.pm, + network/isdn.pm, harddrake/ui.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + + * detect_devices.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + - do not use "foreach $var (...) {...}" use "foreach my $var (...) + {...}" instead + (only pb are functions called in {...} that could use $var, none found + except in commands.pm) + - various small syntax enhancements to please perl_checker + + * partition_table/mac.pm: + - do not use "foreach $var (...) {...}" use "foreach my $var (...) + {...}" instead + (only pb are functions called in {...} that could use $var, none found + except in commands.pm) + - various small syntax enhancements to please perl_checker + + * pkgs.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + - do not use "foreach $var (...) {...}" use "foreach my $var (...) + {...}" instead + (only pb are functions called in {...} that could use $var, none found + except in commands.pm) + - various small syntax enhancements to please perl_checker + + * network/adsl.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + replace qq{...} with qq(...) + + * network/network.pm, mouse.pm, standalone.pm, network/drakfirewall.pm, + partition_table.pm, partition_table/bsd.pm, ugtk.pm, Xconfig/monitor.pm, + modules.pm, network/shorewall.pm, network/modem.pm, resize_fat/main.pm, + resize_fat/any.pm, install_gtk.pm, unused/scsi.pm, + resize_fat/directory.pm, lang.pm, devices.pm, harddrake/v4l.pm, any.pm, + install_steps_gtk.pm, ftp.pm, services.pm, harddrake/sound.pm, + Xconfig/test.pm, steps.pm, keyboard.pm, interactive/gtk.pm, + partition_table/lvm_PV.pm, network/isdn_consts.pm: add or remove spaces + where need to please perl_checker + + * standalone/drakfloppy: don't use <*> for globbing, use all or glob_ + + * standalone/logdrake: replace q@...@ with q(...) or here_doc + + * interactive/stdio.pm, common.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + various small syntax enhancements to please perl_checker + + * http.pm, install_steps.pm, interactive/newt.pm, fs.pm, diskdrake/dav.pm: + + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + + * resize_fat/fat.pm: + - use "foreach" instead of "for" in list context + - use "for" instead of "foreach" when used a la C + various small syntax enhancements to please perl_checker + + * standalone/draksplash, raid.pm, Xconfig/xfreeX.pm, + partition_table/raw.pm: various small syntax enhancements to please + perl_checker + + * install2.pm: add or remove spaces where need to please perl_checker + replace availableMemory with availableMemory() + + * scanner.pm, commands.pm: add or remove spaces where need to please + perl_checker + - do not use "foreach $var (...) {...}" use "foreach my $var (...) + {...}" instead + (only pb are functions called in {...} that could use $var, none found + except in commands.pm) + - various small syntax enhancements to please perl_checker + + * install_steps_interactive.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + replace availableMemory with availableMemory() + + * network/ethernet.pm: add or remove spaces where need to please + perl_checker + various small syntax enhancements to please perl_checker + + * printerdrake.pm, printer.pm: + - replace ... =~ 'foo' with ... =~ /foo/ + - remove unneeded parentheses for things like ... if (...) + add or remove spaces where need to please perl_checker + - use "foreach" instead of "for" in list context + - use "for" instead of "foreach" when used a la C + - do not use "foreach $var (...) {...}" use "foreach my $var (...) + {...}" instead + (only pb are functions called in {...} that could use $var, none found + except in commands.pm) + - various small syntax enhancements to please perl_checker + +2002/11/10 gbeauchesne + + * mdk-stage1/minilibc.c: Fix implementation of signal() for x86-64, adjust + for new kernel-headers + +2002/11/10 Pixel <pixel@mandrakesoft.com> + + * interactive/http.pm: don't return a typeglob ref, return the typeglob + (reference to typeglobs are + soft references which doesn't increment the ref count) + + * network/tools.pm: don't return a typeglob ref, return the typeglob + (reference to typeglobs are + soft references which doesn't increment the ref count) (thanks to Gerard + Patel + for the precise bug report) + + * standalone/draksplash, standalone/drakperm, standalone/drakbug, + bootlook.pm, standalone/harddrake2, standalone/printerdrake, + standalone/logdrake, standalone/drakfloppy, standalone/localedrake: + ensure "common" is imported to have N() + +2002/11/09 Pixel <pixel@mandrakesoft.com> + + * proxy.pm: fix typo + + * network/tools.pm: + - do not use q{...} to please perl_checker + - use <<'EOF' instead + - at the same time, fix the "\n" at the beginning of the generated + script + + * harddrake/data.pm: make perl_checker happy + +2002/11/08 Pixel <pixel@mandrakesoft.com> + + * printer.pm: fix my typos + + * my_gtk.pm: normalize + +2002/11/07 erwan + + * mdk-stage1/stage1-data/stage1-with-kadeploy.tar.bz2, + mdk-stage1/network.c, mdk-stage1/stage1.h, mdk-stage1/url.c: SCSI + Support is now activated + + * rescue/Makefile: Adding missing link for test in tree/usr/bin + + * rescue/list, rescue/list.i386: SCSI support now activated + +2002/11/07 Pablo Saratxaga <pablo@mandrakesoft.com> + + * lang.pm: Added definition of default font for Thai + + * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, + share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, + share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, + share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, + share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, + share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, + share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, + share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, + share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, + share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po, + share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po, + share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po, + share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: updated + pot file + + * share/rpmsrate: Added dependences for greek font and urw-fonts for + cyrillic + +2002/11/07 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * detect_devices.pm: + - getCPUs() : fix cpu fields parsing + - harddrake::detect : + o describe most cpu fields + o print value of skipped fields + perl checker fixes + - harddrake : don't display modem when there're none + - getModem() : + o simplify + o remove unused variables + - getSerialModem() : indent + + * harddrake/ui.pm: + - getCPUs() : fix cpu fields parsing + - harddrake::detect : + o describe most cpu fields + o print value of skipped fields + - describe cpu frequency + - only display help topics related to currently displayed fields in + right framea + - if no device selected, display a message explaining the help dialog + - simplify the unknow driver case for color choice + - only display fields we described + perl checker fixes + - add help for some cpu items + - only display choosen items + - remove a dead statement + + * drakxtools.spec: 1.1.11-1mdk + +2002/11/06 François Pons <fpons@mandrakesoft.com> + + * rescue/tree/etc/oem-all: add extra partition support as primary/logical + with configurable size and fs. + allow configurable min_size, def_size, trigger_size, inst_size, + swap_size. + +2002/11/06 Pixel <pixel@mandrakesoft.com> + + * partition_table.pm, install_any.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + replace complex "unless"s with "if"s + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * printerdrake.pm: replace "for my ..." with "foreach my ..." + replace complex "unless"s with "if"s + remove unneeded parentheses on the right side of infix if/foreach/unless + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * partition_table/raw.pm: remove unneeded parentheses on the right side of + infix if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * harddrake/data.pm, install2.pm, standalone/service_harddrake, + standalone/scannerdrake: make perl_checker happy + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * network/netconnect.pm, diskdrake/interactive.pm, network/isdn.pm: + replace complex "unless"s with "if"s + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * standalone/draksplash, bootlook.pm, share/advertising/14-mdkexpert.pl, + standalone/logdrake, share/advertising/17-mdkclub.pl, interactive.pm, + my_gtk.pm, share/advertising/11-mdkstore.pl, + share/advertising/02-community.pl, share/advertising/01-thanks.pl, + mouse.pm, standalone/keyboarddrake, standalone/drakboot, + share/po/DrakX.pot, standalone.pm, lvm.pm, standalone/drakTermServ, + standalone/net_monitor, share/advertising/05-games.pl, + network/drakfirewall.pm, standalone/mousedrake, Xconfig/main.pm, + install_steps_newt.pm, standalone/drakbackup, diskdrake/smbnfs_gtk.pm, + share/advertising/09-server.pl, share/advertising/04-multimedia.pl, + standalone/printerdrake, share/advertising/13-mdkcampus.pl, + install_steps_auto_install.pm, standalone/drakconnect, + standalone/drakbug, diskdrake/hd_gtk.pm, + share/advertising/07-desktop.pl, Xconfig/monitor.pm, network/adsl.pm, + proxy.pm, modules.pm, share/advertising/10-mnf.pl, network/shorewall.pm, + share/advertising/15-mdkexpert-corporate.pl, + share/advertising/08-development.pl, share/advertising/06-mcc.pl, + standalone/draksound, standalone/drakxtv, security/main.pm, + Xconfig/various.pm, network/modem.pm, help.pm, + diskdrake/removable_gtk.pm, install_gtk.pm, diskdrake/removable.pm, + standalone/drakautoinst, share/po/b_dump_strings.pm, modparm.pm, + install_steps_stdio.pm, Xconfig/xfreeX.pm, standalone/livedrake, + share/advertising/03-internet.pl, standalone/harddrake2, + harddrake/v4l.pm, modules/interactive.pm, crypto.pm, + install_interactive.pm, share/advertising/12-mdkstore.pl, + standalone/localedrake, loopback.pm, any.pm, interactive/http.pm, + interactive/stdio.pm, standalone/drakfloppy, services.pm, + interactive/newt.pm, share/po/Makefile, fs.pm, standalone/drakfont, + network/ethernet.pm, Xconfig/resolution_and_depth.pm, standalone/drakgw, + steps.pm, keyboard.pm, diskdrake/dav.pm, standalone/drakperm, fsedit.pm, + common.pm, share/po/fake_c.pl, harddrake/ui.pm: replace "_" with "N" and + "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * install_steps.pm: replace complex "unless"s with "if"s + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * bootloader.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + cleanup get_of_dev (aka ofpath) + replace complex "unless"s with "if"s + remove unneeded parentheses on the right side of infix if/foreach/unless + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * network/network.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + (write_resolv_conf): much cleanup (originally it was meant to introduce + cat_ and output, but it ended up with a complete rewrite :) + replace complex "unless"s with "if"s + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * scanner.pm: make perl_checker happy + make perl_checker happy + + * commands.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + (cp): use cp_af + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + + * Xconfig/test.pm: please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * standalone/diskdrake, network/nfs.pm: make perl_checker happy + + * Xconfig/card.pm: when needVideoRam, don't take the raw value + VideoRam_probed, + better take a known value <= VideoRam_probed + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * Xconfig/xfree4.pm: please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + + * log.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + + * detect_devices.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + make perl_checker happy + replace complex "unless"s with "if"s + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + + * ugtk.pm: make perl_checker happy + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * install_steps_interactive.pm, harddrake/sound.pm: make perl_checker + happy + replace complex "unless"s with "if"s + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * standalone/XFdrake: fix typo + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * raid.pm, network/tools.pm, install_steps_gtk.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * printer.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + replace "for my ..." with "foreach my ..." + remove unneeded parentheses on the right side of infix if/foreach/unless + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + + * pkgs.pm: + - have "local *FILEHANDLE" before each "open FILEHANDLE, ..." + - use some "cat_" and "output" where possible + please perl_checker: + - local'ize $_ before doing while (<...>) + - use "foreach" instead of "for" + - remove unneeded parentheses on the right side of infix + if/foreach/unless + replace "_" with "N" and "__" with "N_" + rationale: + - currently, we use _("xxx") as a shorthand for gettext("xxx"). It + also used to call xgettext with --keyword=_ + + - alas, function &_ is global and not by package (notice esp. that _ + is not exported in common.pm) + + - this lead to big ugly pb with packages defining their own &_, + overriding common.pm's &_ + + - a fix is to set @::textdomains to add a new domain (the default + being "libDrakX") + + but relying on the global "_" is still dangerous! + +2002/11/06 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * drakxtools.spec: 1.1.10-mdk + + * harddrake/sound.pm: fix for modules.pm not exporting + category2modules_and_description + +2002/11/05 erwan + + * rescue/tree/etc/rc.sysinit: modified rc.sysinit for ka + +2002/11/05 gbeauchesne + + * c/smp.c: Revert last change + Add generic cpu detection on x86-64 and IA-64, based on + sysconf(_SC_NPROCESSORS_ONLN) + + * detect_devices.pm: Detect SMP more easily if we have APIC stuff capable + +2002/11/05 Pixel <pixel@mandrakesoft.com> + + * devices.pm: add /dev/ubd/0, /dev/ubd/1... support (thanks to Brian + Murrell) + + * mouse.pm (xmouse2xId): ensure weird ids are ignored + use find_index instead of map_index + + * interactive/newt.pm: + - fix dialog boxes using a scrollbar + - cleanup + use each_index instead of map_index when the return value is not used + + * interactive.pm: + - do not handle "format"ing in interactive for combos + - do it in interactive::gtk instead (that way, "val" is back"format"ed + in callbacks as wanted) + - die when editable combos are used with non-strings (like arrays or + hashes) + + * partition_table.pm: + - isUBD can tell wether it is an ubd partition + - isSpecial is true for ubd partitions + + * fs.pm (format_ext2): better error message when it is called from + format_ext3 + (thanks to Brian Murrell) + + * diskdrake/interactive.pm, fsedit.pm: introduce a new flag: + getting_rid_of_readonly_allowed. It is set when the partition table + badly handled by diskdrake, but we are still allowed to wipe the + partition table and start + with something new. + + * interactive/gtk.pm: + - do not handle "format"ing in interactive for combos + - do it in interactive::gtk instead (that way, "val" is back"format"ed + in callbacks as wanted) + - die when editable combos are used with non-strings (like arrays or + hashes) + use each_index instead of map_index when the return value is not used + + * install2.pm: basic uml_install support (thanks to Brian Murrell) + use each_index instead of map_index when the return value is not used + + * interactive/http.pm, interactive/stdio.pm, ugtk.pm, raid.pm, + bootloader.pm: use each_index instead of map_index when the return value + is not used + + * Newt/Newt.xs: + - fix dialog boxes using a scrollbar + - cleanup + + * services.pm: fix the use of a non-bounded regexp to check services (fix + "nfs" being marked + on whereas it is "nfslock" which is on) + +2002/11/05 Stew Benedict <sbenedict@mandrakesoft.com> + + * tools/ppc/mkINSTALLCD: Update PPC boot CD creation. + + * mdk-stage1/init.c: PPC TIOCSCTTY changed to 0x540E + +2002/11/05 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * drakxtools.spec: newt rebuild + +2002/11/04 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/sk.po: updated Slovak file + +2002/11/04 Pixel <pixel@mandrakesoft.com> + + * keyboard.pm, Xconfig/xfreeX.pm, Xconfig/parse.pm, + standalone/keyboarddrake: add XkbCompat "group_led" for all keyboards + where a group layout switching is used + + * Xconfig/xfree.pm: have an empty configuration when a config file is + buggy + +2002/11/04 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * printer.pm: typo fixes + + * drakxtools.spec: 1.1.10-2mdk + +2002/11/01 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/ru.po, share/po/pt_BR.po: updated Russian and Portuguese files + +2002/10/31 erwan + + * mdk-stage1/stage1.c, mdk-stage1/network.c, mdk-stage1/tools.c, + mdk-stage1/tools.h, mdk-stage1/url.h, mdk-stage1/url.c: Including + ka-deploy for stage 2 + + * mdk-stage1/stage1-data/stage1-with-kadeploy.tar.bz2: Including ka-deploy + for stage 2 + Adding missing file (stage1-with-kadeploy) + +2002/10/30 erwan + + * mdk-stage1/stage1.c, mdk-stage1/network.c, mdk-stage1/stage1.h, + mdk-stage1/network.h: Applying patch from 8.2, ka.img is working fine in + old mode + +2002/10/30 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/pt.po: updated Portuguese file + +2002/10/29 Stew Benedict <sbenedict@mandrakesoft.com> + + * bootloader.pm, rescue/list.ppc: Reflect changes in yaboot package. + +2002/10/28 alus + + * share/po/pl.po: updated + updated translation + +2002/10/28 Damien Chaumette <dchaumette@mandrakesoft.com> + + * network/modem.pm: add sub winmodemConfigure + + * network/netconnect.pm: few reworks for winmodem detection + + * detect_devices.pm: s#$_->{driver} eq + 'Bad:www.linmodems.org'#$_->{driver} =~ /www.linmodems.org/# to fit with + ldetect + +2002/10/28 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/ro.po: Updated Romanian and Vietnamese files + +2002/10/28 Pixel <pixel@mandrakesoft.com> + + * install_any.pm (preConfigureTimezone): don't set UTC in beginner mode if + there is no windows + +2002/10/28 Stew Benedict <sbenedict@mandrakesoft.com> + + * standalone/drakTermServ: typo in comments: Josep L. Guallar-Esteve + <jlguallar@computer.org> + +2002/10/28 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/sound.pm: add new drivers + +2002/10/25 François Pons <fpons@mandrakesoft.com> + + * rescue/tree/etc/oem-all: reduced version of oem script which allow + installing in oem mode but + without restricting language and without installing any packages. + all package are copied to disk, ie this is an automated hd install + builder. + +2002/10/25 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/zh_CN.po, share/po/vi.po: updated Chinese and Vietnamese files + +2002/10/24 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, + share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, + share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, + share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, + share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, + share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, + share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, + share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, + share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, + share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po, + share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, + share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, + share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: Updated + pot file + +2002/10/23 Pixel <pixel@mandrakesoft.com> + + * network/netconnect.pm, install_steps_newt.pm, harddrake/sound.pm: make + perl_checker happy: replace PKG::f with PKG::f() + +2002/10/23 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/data.pm: nono changes for stupid perl_checker whose maintainer + don't want to fix deficienties + reindent for lord pix + + * harddrake/sound.pm: do a perl_checker pass after pixel one since he only + do half the work + reindent for lord pix + + * ugtk.pm, printer.pm, network/adsl.pm, printerdrake.pm: perl_checker + fixes + + * harddrake/v4l.pm, harddrake/ui.pm: reindent for lord pix + + * detect_devices.pm: fix "poulpy sux" + + * Xconfig/resolution_and_depth.pm: fix pixel code + +2002/10/18 Damien Chaumette <dchaumette@mandrakesoft.com> + + * detect_devices.pm: change dumb return values s/@pci_modems, + $serial_modem/$serial_modem, @pci_modems/ (thanks to pixel) + + * network/netconnect.pm: remove useless 'pop' + change dumb return values s/@pci_modems, $serial_modem/$serial_modem, + @pci_modems/ (thanks to pixel) + +2002/10/17 Damien Chaumette <dchaumette@mandrakesoft.com> + + * harddrake/sound.pm: titi almost sux (he helped me that's why I can't say + titi sux :p) + +2002/10/17 Pixel <pixel@mandrakesoft.com> + + * any.pm, interactive/gtk.pm, network/modem.pm, Xconfig/monitor.pm, + pkgs.pm, interactive/newt.pm, install_steps.pm, + Xconfig/resolution_and_depth.pm, install_steps_interactive.pm: make new + perl_checker happy: replacing PKG::f by PKG::f() + + * network/netconnect.pm: "=head" doc must end with "=cut" + +2002/10/17 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * printer.pm: consolidate more stuff into %spoolers + start to consolidate %spoolers as a data structure + - printerdrake::auto_detect(local, net, smb): + o split into local_detect, net_detect, net_smb_detect + o detect: return all printers + - printer: consolidate all *help_output into help_output + + * detect_devices.pm: add some comments to getCPUs + + * printerdrake.pm: setup_common: consolidate regexp + - printerdrake::auto_detect(local, net, smb): + o split into local_detect, net_detect, net_smb_detect + o detect: return all printers + - printer: consolidate all *help_output into help_output + + * network/netconnect.pm: document network::netconnect::detect() + + * harddrake/data.pm: + - printerdrake::auto_detect(local, net, smb): + o split into local_detect, net_detect, net_smb_detect + o detect: return all printers + - printer: consolidate all *help_output into help_output + +2002/10/16 Damien Chaumette <dchaumette@mandrakesoft.com> + + * network/netconnect.pm: + - winmodem detection fix + +2002/10/16 Guillaume Cottenceau <gc@mandrakesoft.com> + + * my_gtk.pm: fix dams suckiness breaking install2 --test + +2002/10/16 Pixel <pixel@mandrakesoft.com> + + * patch/patch-da.pl, patch/patch-IMPS2.pl: + - fix for bad da .mo charset + - ugly hack to allow IMPS2 switch to work + + * c/stuff.xs.pl: initIMPS2: use /dev/mouse instead of /dev/cdrom (!) + +2002/10/16 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/ui.pm: don't print empty help for fields without any help + - alphabetically sort help items + - add help for some cpu fields + fix Gtk::CTree:insert_node inversing devices order + -add cpus detection + - update todo list + - perl_checker fix + + * standalone/drakfont: bit me! + + * detect_devices.pm: getCPUs() : fix multiples cpu detection + -add cpus detection + - update todo list + - perl_checker fix + + * harddrake/data.pm: display cpu name (eg "Pentium") too in harddrake gui + display "$vendor cpu number $id" for cpus in harddrake gui + miaouh + use code factored in detect_devices for modem detection + -add cpus detection + - update todo list + - perl_checker fix + + * drakxtools.spec: 1.1.10-1mdk + buildrequires: libext2fs-devel + + * harddrake/v4l.pm, harddrake/TODO: + -add cpus detection + - update todo list + - perl_checker fix + +2002/10/15 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * detect_devices.pm: add Pioneer to vendors list + + * harddrake/data.pm: display again unknown category (spoted by florent + beranger) + +2002/10/14 François Pons <fpons@mandrakesoft.com> + + * rescue/tree/etc/oem: remove initrd images before umounting and exiting. + +2002/10/14 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/eu.po: updated Basque file + +2002/10/14 Stew Benedict <sbenedict@mandrakesoft.com> + + * diskdrake/smbnfs_gtk.pm, install_any.pm: Hide password to browse W2k + servers. (Buchan Milne). + Domain name to all caps in smb.conf. (Buchan Milne). + + * standalone/drakTermServ: Finish thin client setup option. + +2002/10/14 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * standalone/drakbug: + - fix typos + - when something is eating io bandwith, drakbug is very slow to scroll + the menu, since on each item selection, it does rpm db + access. solution : + o cache rpm result in %packages + + o only call rpm & which if nothing is cached + + - if there's the selected package isn't installed, just print "package + not installed" (and translate that) + +2002/10/12 Stew Benedict <sbenedict@mandrakesoft.com> + + * standalone/drakTermServ: Read/Write thin client configuration. + Add draktermserv config to enable/disable thin clients. + Update documentation. + +2002/10/11 Damien Chaumette <dchaumette@mandrakesoft.com> + + * network/adsl.pm: fix speedtouch detection + +2002/10/11 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/ca.po, share/po/pt.po, share/po/DrakX.pot: updated Catalan and + Portuguese files + +2002/10/11 Stew Benedict <sbenedict@mandrakesoft.com> + + * standalone/drakTermServ: Dynamic IP pool for client machines. + Don't require image for PCI clients. + Perl_checker fixes. + +2002/10/10 Damien Chaumette <dchaumette@mandrakesoft.com> + + * network/adsl.pm: notify if speedtouch is detected or not + + * network/netconnect.pm: add a warning window for winmodems + + * detect_devices.pm, network/modem.pm: + - move serial modem detection to detect_devices.pm + - add speedtouch USB detection + - add winmodem detection + +2002/10/10 Stew Benedict <sbenedict@mandrakesoft.com> + + * standalone/drakTermServ: Correct typo in create boot ISO code + Add note in help about optional net boot image entry for PCI cards + +2002/10/09 gbeauchesne + + * mdk-stage1/log.c: ISO C standard as to say about va_list on 7.15 [#3] + If access to the varying arguments is desired, the called + function shall declare an object (referred to as ap in this + subclause) having type va_list. The object ap may be passed + as an argument to another function; if that function invokes + the va_arg macro with parameter ap, the value of ap in the + calling function is indeterminate and shall be passed to the + va_end macro prior to any further reference to ap.199) + Which interprets to do reuse a va_list that was already processed. + Instead, use a copy. This fixes crashes on x86-64 and debugging + feasible, since logging is now available. ;-) + + * mdk-stage1/minilibc.h, mdk-stage1/minilibc.c: Add support for x86-64 to + minilibc. But we don't really use it yet, as glibc + requirements for stage1 undoubtedly make images already bigger. So let + have + glibc init there too. ;-) + + * bootloader.pm: I surely don't want nor expect grub and loadlin to work + on x86-64. + + * share/list.x86_64: Update list for perl mods and XF86 4.2.1 support + + * tools/aewm-drakx/misc.c: Apply FredL change from HEAD + + * mdk-stage1/disk.c: Use standard memset() instead of BSD-ish bzero(). + + * mdk-stage1/Makefile, mdk-stage1/Makefile.common: Add x86-64, use glibc + in init and stage1 as dietlibc is not working enough + and minilibc for init doesn't seem to let umounting take place at the + end + of installation. + + * fs.pm: SYS_umount does not exist on modern kernels and architectures + like x86-64 :) + + * mdk-stage1/rescue-gui.c: lib64 support + + * tools/aewm-drakx/client.c: Fix get/set_wm_state(), we have to get the + same data (size) that was set. + + * mdk-stage1/init.c: Add support for lib64 architectures (x86-64, ppc64, + etc.). Aka native + libraries are in */lib64 there. + + * install_any.pm: Let's try a real bash prior to defaulting to perl'ish + /bin/sh? + + * Xconfig/card.pm: Default to XF4 on x86-64 too + + * install_steps_gtk.pm: Yeah, stuck with XFree86 4.X server on x86-64 too. + + * partition_table.pm: Supported journalised FS on x86-64 are ReiserFS and + ext3fs for now. Though, + I haven't tested reiserfs and don't expect it to work before next kernel + update. + + * mdk-stage1/insmod-modutils/util/sys_oim.c, + mdk-stage1/insmod-modutils/obj/obj_common.c, + mdk-stage1/insmod-modutils/include/obj.h, + mdk-stage1/insmod-modutils/util/xsystem.c, + mdk-stage1/insmod-modutils/include/util.h, + mdk-stage1/insmod-modutils/include/version.h, + mdk-stage1/insmod-modutils/util/sys_cm.c, + mdk-stage1/insmod-modutils/obj/obj_s390.c, + mdk-stage1/insmod-modutils/include/elf_sparc64.h, + mdk-stage1/insmod-modutils/include/elf_ppc.h, + mdk-stage1/insmod-modutils/insmod.c, + mdk-stage1/insmod-modutils/include/kallsyms.h, + mdk-stage1/insmod-modutils/include/elf_arm.h, + mdk-stage1/insmod-modutils/include/module.h, + mdk-stage1/insmod-modutils/util/xmalloc.c, + mdk-stage1/insmod-modutils/util/snap_shot.c, + mdk-stage1/insmod-modutils/include/kerneld.h, + mdk-stage1/insmod-modutils/util/sys_qm.c, + mdk-stage1/insmod-modutils/obj/obj_load.c, + mdk-stage1/insmod-modutils/obj/obj_alpha.c, + mdk-stage1/insmod-modutils/obj/obj_x86_64.c, + mdk-stage1/insmod-modutils/include/config.h, + mdk-stage1/insmod-modutils/Makefile, + mdk-stage1/insmod-modutils/obj/obj_gpl_license.c, + mdk-stage1/insmod-modutils/obj/obj_i386.c, + mdk-stage1/insmod-modutils/obj/obj_mips.c, + mdk-stage1/insmod-modutils/include/elf_alpha.h, + mdk-stage1/insmod-modutils/include/elf_s390.h, + mdk-stage1/insmod-modutils/util/config.c, + mdk-stage1/insmod-modutils/util/sys_dm.c, + mdk-stage1/insmod-modutils/include/elf_x86_64.h, + mdk-stage1/insmod-modutils/include/elf_m68k.h, + mdk-stage1/insmod-modutils/obj/obj_kallsyms.c, + mdk-stage1/insmod-modutils/include/elf_i386.h, + mdk-stage1/insmod-modutils/util/xstrcat.c, + mdk-stage1/insmod-modutils/obj/obj_arm.c, + mdk-stage1/insmod-modutils/obj/obj_m68k.c, + mdk-stage1/insmod-modutils/util/sys_nim.c, + mdk-stage1/insmod-modutils/obj/Makefile, + mdk-stage1/insmod-modutils/obj/obj_hppa64.c, + mdk-stage1/insmod-modutils/util/arch64.c, + mdk-stage1/insmod-modutils/obj/obj_hppa.c, + mdk-stage1/insmod-modutils/util/sys_gks.c, + mdk-stage1/insmod-modutils/include/elf_mips.h, + mdk-stage1/insmod-modutils/util/logger.c, + mdk-stage1/insmod-modutils/obj/obj_ppc.c, + mdk-stage1/insmod-modutils/util/xrealloc.c, + mdk-stage1/insmod-modutils/obj/obj_sparc.c, + mdk-stage1/insmod-modutils/util/alias.h, + mdk-stage1/insmod-modutils/util/xstrdup.c, + mdk-stage1/insmod-modutils/include/elf_sparc.h, + mdk-stage1/insmod-modutils/obj/obj_ia64.c, + mdk-stage1/insmod-modutils/obj/obj_sparc64.c, + mdk-stage1/insmod-modutils/obj/obj_reloc.c: Update to modutils 2.4.19 + with x86-64 support and other fixes + + * mdk-stage1/frontend.h, mdk-stage1/stdio-frontend.c: Hint compiler about + unused arguments and don't make it yell in that case. As, + we do use -Werror along with -Wall stuff. + + * mdk-stage1/init-libc-headers.h: <sys/ioctl.h> is needed + + * install_gtk.pm: Somehow, "recent" DrakX changes mutated driver into + Driver and card->type + into card->BoardName + + * printerdrake.pm, any.pm: lib64 fixes + + * proxy.pm: wgetrc is in /etc not /usr/lib + +2002/10/09 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/ui.pm: don't use ugtk directly + +2002/10/08 Frederic Lepied <flepied@mandrakesoft.com> + + * tools/aewm-drakx/misc.c: removed client removal + +2002/10/04 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/ro.po: updated Romanian file + +2002/10/02 alus + + * share/po/pl.po: some changes + +2002/10/02 François Pons <fpons@mandrakesoft.com> + + * patch/patch-oem-9.0.pl, patch/rpmsrate.oem-9.0-staroffice, + patch/rpmsrate.oem-9.0-openoffice: patch necessary for oem to work + nicely and the two rpmsrate that allow + CD of 700MB to be used. + +2002/10/02 Guillaume Cottenceau <gc@mandrakesoft.com> + + * install2.pm: try to fix my fix for blank + + * modules.pm: try to fix my fix for blank + try to make the install work in "blank" mode (aka fix pixel + sucked when changed modules.pm code, not handling blank mode) + + * mdk-stage1/Makefile: cooker + + * mdk-stage1/stage1.c: do not detect/configure pcmcia stuff when "noauto" + param + +2002/10/02 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * patch/patch-nforce.pl: update from oem patch + fix nforce (from francois oem patch) + + * docs/9.0_errata.txt: miaou + i810 crash when using XRender on vt switch (see fredc for further + information) (fixed in cvs & rh's xfree86) + kernel : snd-via686 is said to produce white noise; add workaround + nforce audio bug + drakconf bug has been workarounded + +2002/10/01 dam's <dams@idm.fr> + + * ugtk.pm: forking ugtk, sorry guys. reverted last patch + cleaned, readded needed hack, removed mdk specific functions, added + libconf GUI, WARNING, create_dialog API changed + + * my_gtk.pm: mdk icon_path are added here + +2002/10/01 François Pons <fpons@mandrakesoft.com> + + * install_steps.pm: fixed oem images management not working at all! + +2002/10/01 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * docs/9.0_errata.txt: add 3 bugs: + - drakfont: stat64 syscall blocks drakfont on ntfs partitions + - XFree86: X can corrupt sound when overusing pci bus + (PciRetry fix it) + - some people reports stops on reboot on "illegal seek" (having /usr + and / on the same fs "fix" it) + + * drakxtools.spec: harddrake-ui doesn't need the same obsoletes/provides + as harddrake, + else we may require harddrake-ui on update (thus XFree86 ...) + +2002/09/30 Daouda Lo <daouda@mandrakesoft.com> + + * docs/9.0_errata.txt: + - first draft for all bugs/glitches/inconsistencies in 9.0. Developers + are welcomed to fill it, read it and fix. + +2002/09/30 François Pons <fpons@mandrakesoft.com> + + * install_any.pm: added possible fix for noauto: flag of hdlist not + generating good list file. + +2002/09/30 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/da.po: updated Danish file + + * share/po/id.po, share/po/ro.po: Updated Romanian and Indonesian files + +2002/09/30 Pixel <pixel@mandrakesoft.com> + + * fs.pm: drop "notail" when filesystem is not reiserfs + +2002/09/30 Till Kamppeter <till@mandrakesoft.com> + + * docs/9.0_errata.txt: "Best Grayscale" on HP DJ 6xx/Apollo. + Several bugs found. + +2002/09/28 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/da.po: updated Latvian file; corrected Danish file + corrected encoding + + * share/po/lv.po: updated Latvian file; corrected Danish file + +2002/09/27 Guillaume Cottenceau <gc@mandrakesoft.com> + + * docs/README: refine info on blank.img + +2002/09/26 Guillaume Cottenceau <gc@mandrakesoft.com> + + * network/network.pm: workaround situation when /etc/resolv.conf is an + absolute link to /etc/ppp/resolv.conf or whatever + + * mdk-stage1/dhcp.c, mdk-stage1/network.c: try to not save the hostname + answered by the dhcp server + +2002/09/25 Guillaume Cottenceau <gc@mandrakesoft.com> + + * install_steps_interactive.pm: log install class selection + +2002/09/25 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/eu.po: updated Basque file + + * share/po/tr.po, share/po/cs.po: updated Turkish and Czech files + +2002/09/25 Pixel <pixel@mandrakesoft.com> + + * any.pm: do not allow to create user "root" (thanks to Eric Fernandez) + +2002/09/25 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * harddrake/sound.pm: handle nvaudio too + +2002/09/24 Damien Chaumette <dchaumette@mandrakesoft.com> + + * any.pm: change load_category__prompt_for_more dying 'already displayed' + in return + + * network/ethernet.pm: Fix configureNetwork to fit with new + any::load_category_prompt_for_more behavior + +2002/09/24 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/zh_TW.po, share/po/pt.po: updated Chinese and Portuguese files + +2002/09/24 Pixel <pixel@mandrakesoft.com> + + * raid.pm: also create a raidtab if it doesn't exist (occurs when / has + been formatted) + + * detect_devices.pm: fix raidAutoStartRaidtab crushing /etc/raidtab + + * patch/patch-raidtab.pl: also create a raidtab if it doesn't exist + (occurs when / has been formatted) + fix raidAutoStartRaidtab crushing /etc/raidtab + +2002/09/24 Thierry Vignaud <tvignaud@mandrakesoft.com> + + * ugtk.pm: dams fix enable to get rid of the infamous ugly gtk timeout + from dams: + remove his ugly hack for mcc which altered the + scrolledwindow's "bordure" to hide it. + this used to be done through a gtk timer (hance + the ugly flash on first display of notebook pages) + now createScrolledWindow take a new optional argument + that enable to hide the border the right way + thanks dams + fix expansion of widgets + (eg see draksound help window behaviour on resizing) + + * harddrake/TODO, harddrake/data.pm: move usb video devices to webcam + category + + * security/main.pm: remember to factorize this with rpmdrake's wait + messages in my_gtk + remove "bogus periodic check 2" from periodic checks page + let simplify + + * harddrake/ui.pm: add a few comments + split harddrake part that configure a module into modules::interactive + split devices listing ("detection") part into its own function + (detect) for readability + + * Makefile.config, modules/interactive.pm: split harddrake part that + configure a module into modules::interactive + + * security/msec.pm: ignore_list is useless + + * share/po/br.po: update + +2002/09/23 Damien Chaumette <dchaumette@mandrakesoft.com> + + * network/network.pm: fix NULL Gateway IP checking + +2002/09/23 Guillaume Cottenceau <gc@mandrakesoft.com> + + * install_interactive.pm: tellAboutProprietaryModules: use formatAlaTeX + + * rescue/devices.pl: add st devices + +2002/09/23 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/es.po: updated Spanish file + + * share/po/ru.po: updated Russian file + + * share/po/id.po, share/po/zh_CN.po, share/po/pt.po: updated Indonesian, + Portuguese and Chinese files + + * keyboard.pm: Made Lithuanian numeric row keyboard bi-mode + +2002/09/23 Stew Benedict <sbenedict@mandrakesoft.com> + + * standalone/drakbackup: Really fix daemon mode issue. + Fix daemon mode bug. + +2002/09/23 Warly <warly@mandrakesoft.com> + + * share/rpmsrate: move vim-enhanced in X 4 + fix nforce version + +2002/09/22 alus + + * share/po/pl.po: No... Changes few days before release... + +2002/09/22 Pablo Saratxaga <pablo@mandrakesoft.com> + + * share/po/cy.po, share/po/id.po, share/po/lv.po, share/po/vi.po, + share/po/sk.po, share/po/ru.po, share/po/hu.po: updated Welsh, + Hungarian, Indonesian, Latvian, Russian, Slovak and Vietnamese + +2002/09/22 Pixel <pixel@mandrakesoft.com> + + * install_steps_interactive.pm: fix url + +2002/09/21 Pixel <pixel@mandrakesoft.com> + + * install_steps_interactive.pm: add a small sentence to the license in + order to solve a negociation with + Thomson about the MP3 patents. + 2002/09/22 Pixel <pixel@mandrakesoft.com> * install_steps_interactive.pm: fix url @@ -3947,7 +7352,7 @@ * Makefile.config: remove dir security - * proxy.pm: add $Id: ChangeLog,v 1.758 2002/09/21 23:20:58 prigaux Exp $ + * proxy.pm: add $Id: ChangeLog,v 1.759 2002/09/22 00:31:27 prigaux Exp $ * interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are more accurate than |