7 files changed, 9379 insertions, 2 deletions

diff --git a/perl-install/share/po/.cvsignore b/perl-install/share/po/.cvsignore
index cdae6ca7c..4bcdbffcf 100644
--- a/perl-install/share/po/.cvsignore
+++ b/perl-install/share/po/.cvsignore
@@ -3,4 +3,3 @@
 *.mo
 *~
 doc
-help-*.pot
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
index 0913590b6..6487cc3b6 100644
--- a/perl-install/share/po/Makefile
+++ b/perl-install/share/po/Makefile
@@ -50,7 +50,7 @@ install:
 	done
 
 clean:
-	@rm -rf drakx-help.xml .memdump help-*.po{t,} doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
+	@rm -rf drakx-help.xml .memdump doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
 
 check:
 	@grep -F '$$' DrakX.pot && { echo "bad translation strings (contains \$$) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"; exit 1; } ||:
diff --git a/perl-install/share/po/help-de.pot b/perl-install/share/po/help-de.pot
new file mode 100644
index 000000000..41876c8b7
--- /dev/null
+++ b/perl-install/share/po/help-de.pot
@@ -0,0 +1,1911 @@
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+msgstr ""
+"„LILO“ (der LInux LOader) und „grub“ sind Betriebssystemstarter: Diese\n"
+"Programme starten entweder GNU/Linux oder die anderen Betriebssysteme, die\n"
+"auf Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge\n"
+"alle existierenden Betriebssysteme korrekt und bieten Sie als\n"
+"Startalternativen an. Ist dies einmal nicht der Fall, können Sie hier\n"
+"manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die\n"
+"korrekten Parameter eingeben.\n"
+"\n"
+"Eventuell möchten Sie anderen Anwendern nicht die Möglichkeit geben, diese\n"
+"anderen Betriebssysteme zu verwenden, in diesem Fall können Sie den\n"
+"entsprechenden Eintrag einfach löschen. Das hat jedoch zur Folge, dass sie\n"
+"eine Startdiskette benötigen, um diese Betriebssysteme in Zukunft starten\n"
+"zu können."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Please choose your preferred language for installation and system usage.\n"
+"\n"
+"Clicking on the \"Advanced\" button will allow you to select other\n"
+"languages to be installed on your workstation. Selecting other languages\n"
+"will install the language-specific files for system documentation and\n"
+"applications. For example, if you will host users from Spain on your\n"
+"machine, select English as the main language in the tree view and in the\n"
+"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"\n"
+"Note that multiple languages may be installed. Once you have selected any\n"
+"additional locales, click the \"OK\" button to continue."
+msgstr ""
+"Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und\n"
+"Systemlaufzeit.\n"
+"\n"
+"Durch Betätigen der Schaltfläche „Fortgeschritten“ erhalten Sie die\n"
+"Möglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
+"später verwenden zu können. Wollen Sie etwa Spaniern muttersprachlichen\n"
+"Zugang zu Ihrem System erlauben, wählen Sie deutsch als Hauptsprache in der\n"
+"Liste und im Fortgeschrittenen-Bereich „Spanish|Spain“.\n"
+"\n"
+"Haben Sie eine Sprache markiert und die Wahl mit „OK“ bestätigt, gelangen\n"
+"Sie automatisch zum nächsten Schritt."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"At this point, you need to choose where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space, you will\n"
+"need to partition it. Basically, partitioning a hard drive consists of\n"
+"logically dividing it to create space to install your new Mandrake Linux\n"
+"system.\n"
+"\n"
+"Because the partitioning process' effects are usually irreversible,\n"
+"partitioning can be intimidating and stressful if you are an inexperienced\n"
+"user. Fortunately, there is a wizard which simplifies this process. Before\n"
+"beginning, please consult the manual and take your time.\n"
+"\n"
+"If you are running the installation in Expert mode, you will enter\n"
+"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
+"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
+"From the installation interface, you can use the wizards as described here\n"
+"by clicking the dialog's \"Wizard\" button.\n"
+"\n"
+"If partitions have already been defined, either from a previous\n"
+"installation or from another partitioning tool, simply select those to\n"
+"install your Linux system.\n"
+"\n"
+"If partitions are not defined, you will need to create them using the\n"
+"wizard. Depending on your hard drive configuration, several options are\n"
+"available:\n"
+"\n"
+" * \"Use free space\": this option will simply lead to an automatic\n"
+"partitioning of your blank drive(s). You will not be prompted further;\n"
+"\n"
+" * \"Use existing partition\": the wizard has detected one or more existing\n"
+"Linux partitions on your hard drive. If you want to use them, choose this\n"
+"option;\n"
+"\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
+"be performed without the loss of any data, provided you previously\n"
+"defragment the Windows partition. Backing up your data won't hurt either..\n"
+"This solution is recommended if you want to use both Mandrake Linux and\n"
+"Microsoft Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
+"\n"
+" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
+"present on your hard drive and replace them with your new Mandrake Linux\n"
+"system, choose this option. Be careful with this solution because you will\n"
+"not be able to revert your choice after you confirm;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Remove Windows\": this will simply erase everything on the drive and\n"
+"begin fresh, partitioning everything from scratch. All data on your disk\n"
+"will be lost;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Expert mode\": choose this option if you want to manually partition\n"
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
+msgstr ""
+"Sie müssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
+"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
+"Betriebssystem alles belegt, müssen die Platte(n) neu partitioniert werden.\n"
+"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
+"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
+"werden kann.\n"
+"\n"
+"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
+"für unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
+"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
+"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
+"Entscheidung.\n"
+"\n"
+"Wenn Sie die Installation im Expertenmodus durchführen, werden Sie nun das\n"
+"Mandrake Linux Partitionier-Werkzeug kennen lernen: „DiskDrake“. Es erlaubt\n"
+"Ihnen Ihre Partitionen genau auf Ihre Bedürfnisse abzustimmen. Falls Sie\n"
+"keine Ahnung haben, wie Sie die Festplatte partitionieren sollen, wählen\n"
+"Sie die Schaltfläche „Assistent“ und überlassen diesem damit die gesamte\n"
+"Arbeit.\n"
+"\n"
+"Sollten Sie bereits Partitionen haben (etwa von einer alten GNU/Linux\n"
+"Installation oder solche, die mit einem anderen Partitionierungswerkzeug\n"
+"erstellt wurden), die Sie für die Installation von Mandrake Linux verwenden\n"
+"wollen, wählen Sie diese hier einfach aus.\n"
+"\n"
+"Falls noch keine Partitionen existieren, müssen Sie sie erstellen.\n"
+"Verwenden Sie dafür obigen Assistenten. Abhängig vom aktuellen Zustand\n"
+"Ihrer Platte(n) haben Sie verschiedene Alternativen:\n"
+"\n"
+" * „Freien Platz verwenden“: Dies führt einfach dazu, dass Ihre leere(n)\n"
+"Festplatte(n) automatisch partitioniert werden; Sie müssen sich also um\n"
+"nichts weiter kümmern.(*)\n"
+"\n"
+" * „Verwende existierende“: Der Assistent hat eine oder mehrere\n"
+"existierende Linux Partitionen auf Ihrer Platte gefunden. Wählen Sie diese\n"
+"Schaltfläche, falls Sie sie behalten wollen.\n"
+"\n"
+" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
+"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wählen Sie\n"
+"diese Schaltfläche. Beachten Sie, dass dieser Schritt nicht rückgängig\n"
+"gemacht werden kann.\n"
+"\n"
+" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
+"Plattenplatz aktuell für Microsoft Windows(TM) verschwendet ist, müssen Sie\n"
+"für Linux Platz schaffen. Um dies zu erreichen, können Sie entweder Ihre\n"
+"Microsoft Windows(TM) Partition(en) samt Daten löschen (siehe „Komplette\n"
+"Platte löschen“ oder „Experten-Modus“) oder Ihre Windows Partition\n"
+"verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese Variante\n"
+"wählen, falls Sie beide Betriebssysteme (Windows und Mandrake Linux)\n"
+"nebeneinander nutzen wollen.\n"
+"\n"
+"   Bevor Sie sich für diese Variante entscheiden, sei hier noch einmal\n"
+"betont, dass das bedeutet, Sie haben weniger Platz für Windows als\n"
+"momentan.\n"
+"\n"
+" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
+"Partitionen gelöscht und die Platte(n) komplett neu partitioniert.\n"
+"\n"
+"   !! Alle Daten auf den Platten gehen dadurch verloren! !!\n"
+"\n"
+" * „Expertenmodus“: Wenn Sie Ihre Festplatte selber von Hand partitionieren\n"
+"wollen, dann können Sie diese Option wählen. Seien Sie bitte sehr\n"
+"sorgfältig, wenn Sie diese Lösung wählen, da Sie zwar alle möglichen\n"
+"Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren\n"
+"können. Diese Option ist nur geeignet, wenn Sie wissen, was Sie tun.\n"
+"\n"
+"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
+"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
+"dürfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
+"proprietäre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
+"dass es freie und sogar kostenlose Alternativen gibt. Jeder Käufer eines\n"
+"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
+"aus Redmond gleichgesetzt."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
+"will try to configure X automatically.\n"
+"\n"
+"It is extremely rare for it to fail, unless the hardware is very old (or\n"
+"very new). If it succeeds, it will start X automatically with the best\n"
+"resolution possible, depending on the size of the monitor. A window will\n"
+"then appear and ask you if you can see it.\n"
+"\n"
+"If you are doing an \"Expert\" installation, you will enter the X\n"
+"configuration wizard. See the corresponding section of the manual for more\n"
+"information about this wizard.\n"
+"\n"
+"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
+"will proceed to the next step. If you cannot see the message, it simply\n"
+"means that the configuration was wrong and the test will automatically end\n"
+"after 10 seconds, restoring the screen."
+msgstr ""
+"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
+"GNU/Linux. Es bildet die Grundlage für die Vielzahl grafischer\n"
+"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
+"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
+"soweit wie möglich selbstständig vollziehen.\n"
+"\n"
+"Sollten Sie nicht gerade sehr alte, sehr neue oder exotische Grafikhardware\n"
+"einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchführen und\n"
+"anschließend die grafische Oberfläche mit der bestmöglichen Auflösung\n"
+"starten! Es erscheint ein Testfenster und Sie werden anschließend gefragt,\n"
+"ob die Anzeige einwandfrei war.\n"
+"\n"
+"Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
+"folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
+"\n"
+"Falls das Bild korrekt dargestellt wird, wählen Sie bitte die Schaltfläche\n"
+"„Ja“ an, „DrakX“ wird dann mit dem nächsten Schritt der Installation\n"
+"fortfahren. Sollte der Schirm aus irgendwelchen Gründen nicht lesbar sein,\n"
+"müssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
+"Konfigurationsmenü erscheinen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Your new Mandrake Linux operating system is currently being installed.\n"
+"Depending on the number of packages you will be installing and the speed of\n"
+"your computer, this operation could take from a few minutes to a\n"
+"significant amount of time.\n"
+"\n"
+"Please be patient."
+msgstr ""
+"Ihre neue Mandrake Linux Distribution wird nun installiert. Das dauert\n"
+"einige Minuten (abhängig von der Anzahl zu installierender Pakete und der\n"
+"Geschwindigkeit Ihres Rechners).\n"
+"\n"
+"Bitte haben Sie etwas Geduld."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"Wählen Sie die Festplatte, die sie löschen wollen, um Ihre neue Mandrake\n"
+"Linux Distribution darauf zu installieren. Achtung: Alle darauf\n"
+"befindlichen Daten gehen bei diesem Schritt unwiederbringlich verloren!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"GNU/Linux is a multiuser system, and this means that each user can have his\n"
+"own preferences, his own files and so on. You can read the ``User Guide''\n"
+"to learn more. But unlike \"root\", which is the administrator, the users\n"
+"you will add here will not be entitled to change anything except their own\n"
+"files and their own configuration. You will have to create at least one\n"
+"regular user for yourself. That account is where you should log in for\n"
+"routine use. Although it is very practical to log in as \"root\" everyday,\n"
+"it may also be very dangerous! The slightest mistake could mean that your\n"
+"system would not work any more. If you make a serious mistake as a regular\n"
+"user, you may only lose some information, but not the entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
+"as you can actually enter whatever you want. DrakX will then take the first\n"
+"word you have entered in the box and will bring it over to the \"User\n"
+"name\". This is the name this particular user will use to log onto the\n"
+"system. You can change it. You then have to enter a password here. A\n"
+"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
+"from a security point of view, but that is no reason to neglect it: after\n"
+"all, your files are at risk.\n"
+"\n"
+"If you click on \"Accept user\", you can then add as many as you want. Add\n"
+"a user for each one of your friends: your father or your sister, for\n"
+"example. When you finish adding all the users you want, select \"Done\".\n"
+"\n"
+"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
+"for that user (bash by default)."
+msgstr ""
+"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
+"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
+"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
+"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
+"können Sie im Benutzerhandbuch nachsehen. Sie können mehrere normale\n"
+"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
+"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
+"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
+"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
+"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
+"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
+"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
+"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
+"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
+"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
+"\n"
+"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
+"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
+"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
+"der Name, den Sie zum Anmelden für dieses Kennzeichen benötigen. Natürlich\n"
+"können Sie ihn hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein\n"
+"Passwort. Für ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
+"herausragender Bedeutung wie das für »root«, doch Sie sollten trotzdem\n"
+"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten ...\n"
+"\n"
+"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
+"Anschließend können Sie direkt weitere Benutzer hinzufügen. Wenn Sie allen\n"
+"Kennzeichen erstellt haben, klicken Sie auf „Fertig“.\n"
+"\n"
+"Durch Anwahl der Schaltfläche „Fortgeschritten“ haben Sie auch die\n"
+"Möglichkeit, die Standard-Shell dieses Benutzers ändern (normalerweise ist\n"
+"dies die „Bash“)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Finally, you will be asked whether you want to see the graphical interface\n"
+"at boot. Note this question will be asked even if you chose not to test the\n"
+"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
+"act as a server, or if you were not successful in getting the display\n"
+"configured."
+msgstr ""
+"Letztlich werden Sie gefragt, ob sie direkt in die grafische Oberfläche\n"
+"starten wollen. Diese Frage wird auch erscheinen, wenn Sie das Testen der\n"
+"Konfiguration übersprungen haben. Schlug die Konfiguration der grafischen\n"
+"Umgebung fehl oder wollen Sie den Rechner als Server laufen lassen, geben\n"
+"Sie natürlich „Nein“ an."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful to\n"
+"choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt;\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information;\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt;\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"„Yaboot“ ist ein BS-Starter für NewWorld MacIntosh Rechner. Er kann sowohl\n"
+"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
+"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
+"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
+"können Sie diese hier manuell hinzufügen. Stellen Sie jedoch sicher, die\n"
+"richtigen Parameter zu verwenden.\n"
+"\n"
+"Die Hauptparameter von „Yaboot“ sind:\n"
+"\n"
+" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
+"wird.\n"
+"\n"
+" * „Boot Gerät“: Hiermit wird angegeben, wohin die Informationen zum\n"
+"Starten Ihres GNU/Linux Systems geschrieben werden sollen. Sie sollten in\n"
+"einem früheren Schritt bereits eine Boot-Partition angelegt haben, um diese\n"
+"Daten zu beherbergen.\n"
+"\n"
+" * „Open Firmware Verzögerung“: Im Gegensatz zu „LILO“, stehen mit „Yaboot“\n"
+"zwei Verzögerungen zur Verfügung. Die erste Verzögerung wird in Sekunden\n"
+"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
+"\n"
+" * „BS-Startverzögerung für den Kern“: Diese Verzögerung entspricht der\n"
+"„LILO“ Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
+"Verzögerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
+"wird.\n"
+"\n"
+" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
+"der ersten Eingabeaufforderung „C“ für den Start von CD zu wählen.\n"
+"\n"
+" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
+"an der ersten Eingabeaufforderung „N“ für den Open Firmware Start zu\n"
+"wählen.\n"
+"\n"
+" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
+"Ablauf der Open Firmware Verzögerung automatisch gestartet werden soll."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"At this point, it is time to choose the security level desired for the\n"
+"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
+"the data stored in it is crucial, the higher the security level should be.\n"
+"However, a higher security level is generally obtained at the expense of\n"
+"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
+"to get more information about the meaning of these levels.\n"
+"\n"
+"If you do not know what to choose, keep the default option."
+msgstr ""
+"Nun ist es an der Zeit, die gewünschte Sicherheitsebene für Ihr System\n"
+"festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher die\n"
+"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
+"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
+"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
+"gewisse Befehle/Abläufe durchgeführt werden können. Ausführlichere\n"
+"Erläuterungen zu den verschiedenen Sicherheitsebenen erhalten Sie im\n"
+"Kapitel MSEC des Referenzhandbuchs.\n"
+"\n"
+"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
+"Standardeinstellung bei."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Bitte wählen Sie den richtigen Anschluss aus. Die COM1-Schnittstelle unter\n"
+"Windows wird beispielsweise unter GNU/Linux als „ttyS0“ bezeichnet."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Here are presented various parameters concerning your machine. Depending on\n"
+"your installed hardware, you may - or not, see the following entries:\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary;\n"
+"\n"
+" * \"Keyboard\": check the current keyboard map configuration and click on\n"
+"the button to change that if necessary;\n"
+"\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
+"\n"
+" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"configuration wizard;\n"
+"\n"
+" * \"Sound card\": if a sound card is detected on your system, it is\n"
+"displayed here. No modification possible at installation time;\n"
+"\n"
+" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+"here. No modification possible at installation time;\n"
+"\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+"displayed here. You can click on the button to change the parameters\n"
+"associated with it."
+msgstr ""
+"Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je nach\n"
+"vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Einträge:\n"
+"\n"
+" * „Maus“: Kontrollieren Sie die konfigurierte Maus und betätigen Sie,\n"
+"falls notwendig, die Schaltfläche.\n"
+"\n"
+" * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wählen\n"
+"Sie die Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
+"\n"
+" * „Zeitzone“: „DrakX“ versucht die Zeitzone anhand der gewählten Sprache\n"
+"zu „erraten“. Es ist jedoch möglich, dass Sie sich nicht in dem Land\n"
+"befinden, das die vorgegebene Sprache erahnen lässt. In diesem Fall sollten\n"
+"Sie die Schaltfläche anwählen, um die Uhr entsprechend Ihrer lokalen\n"
+"Zeitzone zu setzen.\n"
+"\n"
+" * „Drucker“: Durch Anwahl der Schaltfläche „Kein Drucker“ starten Sie den\n"
+"Druckerassistenten.\n"
+"\n"
+" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde,\n"
+"wird sie hier angezeigt. Es ist jedoch keine Änderung während der\n"
+"Installation möglich.\n"
+"\n"
+" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird\n"
+"sie hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
+"möglich.\n"
+"\n"
+" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde,\n"
+"wird sie hier angezeigt. Durch Anwahl der Schaltfläche können Sie die\n"
+"Parameter ändern."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
+"installation or if you want to have greater control (\"Expert\"). You can\n"
+"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
+"system:\n"
+"\n"
+" * \"Install\": completely wipes out the old system. In fact, depending on\n"
+"what currently holds your machine, you will be able to keep some old (Linux\n"
+"or other) partitions unchanged;\n"
+"\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
+"\n"
+" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
+"existing Mandrake Linux system while keeping all system configurations\n"
+"unchanged. Adding new packages to the current installation is also\n"
+"possible.\n"
+"\n"
+"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
+"release.\n"
+"\n"
+"Depending on your knowledge of GNU/Linux, select one of the following\n"
+"choices:\n"
+"\n"
+" * Recommended: choose this if you have never installed a GNU/Linux\n"
+"operating system. The installation will be very easy and you will only be\n"
+"asked a few questions;\n"
+"\n"
+" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
+"installation class. The expert installation will allow you to perform a\n"
+"highly-customized installation. Answering some of the questions can be\n"
+"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
+"choose this unless you know what you are doing."
+msgstr ""
+"„DrakX“ fragt Sie nun nach der gewünschten Installationsart. Sie haben die\n"
+"Wahl zwischen einer Standardinstallation („Empfehlenswert“) und einer\n"
+"Variante, in der Sie mehr Einfluss ausüben können („Experte“). Sie müssen\n"
+"sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
+"Aktualisierung einer bereits vorhandenen Mandrake Linux-Version vornehmen\n"
+"wollen. Es ist möglich, die Installation über ein existierendes BS zu\n"
+"installieren und dieses damit zu entfernen. Sie können auch eine\n"
+"Aktualisierung vornehmen, um eine existierende Installation zu reparieren.\n"
+"Wählen Sie:\n"
+"\n"
+" * „Installieren“: Entfernt komplett ältere Versionen von Mandrake Linux,\n"
+"die noch installiert sind - um genau zu sein können Sie je nach aktuellem\n"
+"Inhalt Ihrer Platte auch einige ältere Linux- oder anderweitige Partitionen\n"
+"unangetastet behalten.\n"
+"\n"
+" * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
+"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
+"persönlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
+"Installationsschritte werden wie bei einer Installation ausgeführt.\n"
+"\n"
+" * „Nur Pakete aktualisieren“: In dieser Variante werden alle Schritte der\n"
+"Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
+"übersprungen.\n"
+"\n"
+"Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, können Sie sich für\n"
+"eine der folgenden Installations- oder Aktualisierungsarten für Ihr\n"
+"Mandrake Linux System entscheiden:\n"
+"\n"
+" * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
+"installiert haben. Die Installation wird sehr einfach sein und es werden\n"
+"Ihnen nur sehr wenige Fragen gestellt werden.\n"
+"\n"
+" * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen und\n"
+"hochgranulare Wahlmöglichkeiten wünschen, ist dies Ihre\n"
+"Installationsmethode. Wie bei der benutzerdefinierten Installation können\n"
+"Sie die hauptsächliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
+"„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn Sie\n"
+"sich für diese Installationsklasse entscheiden. Die Antworten auf einige\n"
+"Fragen können sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
+"Stabilität Ihrer Distribution haben. Wählen Sie diese Installationsklasse\n"
+"also wirklich nur wenn Sie wissen, was Sie tun!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
+"accordingly, depending on what it finds here:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
+"OS;\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If in doubt, DrakX will display a dialog with various options.\n"
+"\n"
+" * \"Bootloader to use\": you have three choices:\n"
+"\n"
+"    * \"GRUB\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
+"interface.\n"
+"\n"
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
+"interface.\n"
+"\n"
+" * \"Boot device\": in most cases, you will not change the default\n"
+"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
+"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"\n"
+" * \"Delay before booting the default image\": when rebooting the computer,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"another boot entry than the default one.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
+"Linux system! Also, be sure you know what you do before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
+"options, which are reserved to the expert user.\n"
+"\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options which will be available at boot time will be displayed.\n"
+"\n"
+"If there is another operating system installed on your machine, it will\n"
+"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
+"the existing options. Select an entry and click \"Modify\" to modify or\n"
+"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"installation step."
+msgstr ""
+"„LILO“ und „grub“ sind Betriebssystemstarter für GNU/Linux. Diese\n"
+"Installationsphase läuft in den meisten Fällen völlig automatisch ab.\n"
+"„DrakX“ analysiert den Bootsektor und ergreift dann die passenden\n"
+"Maßnahmen:\n"
+"\n"
+" * Findet „DrakX“ einen Windows-Bootsektor, ersetzt es ihn durch einen\n"
+"„grub“ oder „LILO“-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
+"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
+"vorhanden) und Windows auszuwählen;\n"
+"\n"
+" * Findet „DrakX“ einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
+"neuen;\n"
+"\n"
+"Im Zweifelsfall bietet „DrakX“ Ihnen einen Dialog mit verschiedenen\n"
+"Auswahlmöglichkeiten.\n"
+"\n"
+" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
+"Alternativen:\n"
+"\n"
+"    * „Grub“: Falls Sie „grub“ (Textmenü) bevorzugen.\n"
+"\n"
+"    * „LILO mit grafischem Menü“: Falls Sie „LILO“ mit seiner grafischen\n"
+"Oberfläche bevorzugen.\n"
+"\n"
+"    * „LILO mit Textmenü“: Falls Sie „LILO“ mit Textmenü als Ihren\n"
+"Favoriten ansehen.\n"
+"\n"
+" * „Boot Gerät“: Normalerweise müssen Sie hier nichts ändern („/dev/hda“),\n"
+"Sie könnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
+"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
+"\n"
+" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
+"Rechner neu starten erhalten Sie im Menü der zur Verfügung stehenden BSe\n"
+"eine gewisse Zeit um auszuwählen, was Sie starten möchten. Sollten Sie\n"
+"während dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
+"gestartet.\n"
+"\n"
+"!! Machen Sie sich klar, dass Sie sich selbst darum kümmern müssen,\n"
+"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
+"Betriebssystemstarter installieren (durch Auswahl von „Abbruch“). Stellen\n"
+"Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
+"verändern ... !!\n"
+"\n"
+"Durch wählen der Schaltfläche „Fortgeschritten“ erhalten Sie etliche\n"
+"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben.\n"
+"\n"
+"Mandrake Linux installiert normalerweise seinen eigenen\n"
+"Betriebssystemstarter, der Sie sowohl GNU/Linux, als auch alle anderen\n"
+"installierten Betriebssysteme starten lässt.\n"
+"\n"
+"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
+"so wird dieses - sofern es erkannt wird - automatisch zu dem Startmenü\n"
+"hinzugefügt. Hier können Sie noch einige Feineinstellungen für die\n"
+"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
+"betätigen Sie die Schaltfläche „Ändern“, um ihn anzupassen oder zu löschen;\n"
+"„Hinzufügen“ erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum\n"
+"nächsten Installationsschritt."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Some bugs may have\n"
+"been fixed, and security issues solved. To allow you to benefit from these\n"
+"updates, you are now proposed to download them from the Internet. Choose\n"
+"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
+"to install updated packages later.\n"
+"\n"
+"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"retrieved. Choose the one nearest you. Then a package-selection tree\n"
+"appears: review the selection, and press \"Install\" to retrieve and\n"
+"install the selected package(s), or \"Cancel\" to abort."
+msgstr ""
+"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
+"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
+"entdeckt und beseitigt wurden oder da in Paketen Sicherheitslücken entdeckt\n"
+"wurden, für die bereits Lösungen existieren. Um von diesen aktualisierten\n"
+"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
+"Internet nachzuladen. Betätigen Sie die Schaltfläche „Ja“, wenn Sie einen\n"
+"Internetzugang haben, um die Pakete zu installieren, andernfalls betätigen\n"
+"Sie die Schaltfläche „Nein“. Sie können diese Pakete natürlich auch\n"
+"jederzeit nach der Installation noch installieren.\n"
+"\n"
+"Betätigen der Schaltfläche „Ja“ zeigt Ihnen eine Liste von Servern, von\n"
+"denen Sie die Aktualisierungen herunterladen können. Wählen Sie einen in\n"
+"Ihrer Nähe. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
+"die Auswahl und bestätigen Sie diese durch Betätigen von „Installieren“.\n"
+"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
+"wünschen, betätigen Sie einfach die Schaltfläche „Abbruch“."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Es wurde mehr als nur eine Microsoft Windows(TM) Partition auf Ihrer Platte\n"
+"gefunden. Bitte wählen Sie welche Sie verkleinern wollen, um Ihr neues\n"
+"Betriebssystem Mandrake Linux installieren zu können.\n"
+"\n"
+"Zu Ihrer Information sind alle Partitionen folgendermaßen aufgeführt:\n"
+"„Linuxname“, „Windowsname“, „Kapazität“.\n"
+"\n"
+"„Linuxname“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“\n"
+"und „Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
+"\n"
+"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
+"„sd“ wenn es eine SCSI Platte ist.\n"
+"\n"
+"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
+"Platten bedeutet:\n"
+"\n"
+" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
+"\n"
+" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
+"\n"
+" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
+"\n"
+" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“.\n"
+"\n"
+"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
+"Festplatte am Bus“, etc.\n"
+"\n"
+"„Windowsname“ ist der Laufwerksbuchstabe, wie er von Windows vergeben wird\n"
+"(die erste FAT Partition der ersten Platte heißt „C:“)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Here, we select a printing system for your computer. Other OSs may offer\n"
+"you one, but Mandrake Linux offers three.\n"
+"\n"
+" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+"a direct connection to your printer and you want to be able to panic out of\n"
+"printer jams, and you do not have networked printers. It will handle only\n"
+"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
+"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
+"after installation by running PrinterDrake from the Mandrake Control Center\n"
+"and clicking the expert button.\n"
+"\n"
+" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+"your local printer and also halfway-around the planet. It is simple and can\n"
+"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
+"it is compatible with the systems that went before. It can do many tricks,\n"
+"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
+"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
+"graphical front-ends for printing or choosing printer options.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
+"approximately the same things the others can do, but it will print to\n"
+"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
+"and it can print directly to shell commands. If you have need of Novell or\n"
+"printing to commands without using a separate pipe construct, use lprNG.\n"
+"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
+"networks."
+msgstr ""
+"Sie können nun ein Drucksystem wählen. Wo andere Betriebssysteme Ihnen nur\n"
+"eins bieten, bietet Mandrake Linux Ihnen drei:\n"
+"\n"
+" * „pdq“ - Es steht für „print, don't queue“ (engl. für „Drucken ohne\n"
+"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
+"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
+"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
+"dabei aber extrem langsam. Wählen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
+"sind. Sie können diese Wahl später immer wieder ändern, indem Sie\n"
+"PrinterDrake im Mandrake Kontrollzentrum starten und dort die Schaltfläche\n"
+"„Expertenmodus“ betätigen.\n"
+"\n"
+" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
+"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
+"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
+"auf der anderen Seite der Welt hängt. Es ist einfach zu bedienen und kann\n"
+"sowohl als Server als auch als Klient für das alte „lpd“-Drucksystem\n"
+"verwendet werden - Es ist somit rückwärtskompatibel. Es ist sehr mächtig,\n"
+"in seiner Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie\n"
+"einen „lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
+"starten. „CUPS“ bietet grafische Konfigurations- und Druckmenüs.\n"
+"\n"
+" * „LPRng“ - „Line Printer Daemon new generation“ (engl. für\n"
+"„Zeilendrucker-Dämon - Neue Generation“). Dieses System bietet etwa das\n"
+"gleiche, was die beiden vorherigen können, es erlaubt Ihnen jedoch auch auf\n"
+"Drucker in Novell Netzwerken zuzugreifen, da es das IPX Protokoll\n"
+"beherrscht. Falls Sie das benötigen, verwenden Sie LPRng. Andernfalls ist\n"
+"„CUPS“ vorzuziehen, da es benutzerfreundlicher ist und in\n"
+"Nicht-IPX-Netzwerken besser funktioniert."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"The first time you try the X configuration, you may not be very satisfied\n"
+"with its display (screen is too small, shifted left or right...). Hence,\n"
+"even if X starts up correctly, DrakX then asks you if the configuration\n"
+"suits you. It will also propose to change it by displaying a list of valid\n"
+"modes it could find, asking you to select one.\n"
+"\n"
+"As a last resort, if you still cannot get X to work, choose \"Change\n"
+"graphics card\", select \"Unlisted card\", and when prompted on which\n"
+"server, choose \"FBDev\". This is a failsafe option which works with any\n"
+"modern graphics card. Then choose \"Test again\" to be sure."
+msgstr ""
+"Es kann Ihnen passieren, dass der erste Versuch noch nicht korrekt ist (Der\n"
+"Schirm ist zu klein, liegt zu weit rechts oder links ...). Daher werden Sie\n"
+"selbst dann mit der Frage konfrontiert, wenn der „DrakX“-Server sich\n"
+"starten lies, „DrakX“ also davon ausgehen könnte, dass alles in Ordnung\n"
+"ist. Sie erhalten daher eine Liste von gültigen Modi, aus denen Sie\n"
+"versuchen sollten den besten auszuwählen.\n"
+"\n"
+"Sollten alle stricke reißen, und „DrakX“ immer noch nicht laufen, wählen\n"
+"Sie einfach im Untermenü „Grafikkarte ändern“, den Punkt „Nicht\n"
+"aufgeführt“. Wenn Sie dann nach dem Server gefragt werden, wählen Sie den\n"
+"„FBDev“: Diese Variante sollte mit allen modernen Grafikkarten\n"
+"funktionieren. Ein „Nochmals testen“ sollte Gewissheit bringen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"DrakX generally detects the number of buttons your mouse has. If not, it\n"
+"assumes you have a two-button mouse and will set it up for third-button\n"
+"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
+"USB mouse.\n"
+"\n"
+"If you wish to specify a different type of mouse select the appropriate\n"
+"type from the provided list.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct. If the mouse is not working well, press the space bar or [Return]\n"
+"to \"Cancel\" and choose again."
+msgstr ""
+"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
+"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
+"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt üblicherweise\n"
+"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
+"handelt.\n"
+"\n"
+"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
+"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
+"\n"
+"Anschließend können Sie die Funktionstüchtigkeit Ihrer Maus überprüfen.\n"
+"Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad, um\n"
+"sicherzustellen, dass die festgelegten Einstellungen funktionieren. Falls\n"
+"nicht, klicken Sie auf „Abbrechen“ und wählen einen anderen Treiber aus."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"You are now proposed to set up your Internet/network connection. If you\n"
+"wish to connect your computer to the Internet or to a local network, click\n"
+"\"OK\". The autodetection of network devices and modem will be launched. If\n"
+"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
+"may also choose not to configure the network, or do it later; in that case,\n"
+"simply click the \"Cancel\" button.\n"
+"\n"
+"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"Here, we will not detail each configuration. Simply make sure that you have\n"
+"all the parameters from your Internet Service Provider or system\n"
+"administrator.\n"
+"\n"
+"You can consult the ``User Guide'' chapter about Internet connections for\n"
+"details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection.\n"
+"\n"
+"If you wish to configure the network later after installation, or if you\n"
+"are finished configuring your network connection, click \"Cancel\"."
+msgstr ""
+"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
+"verbinden wollen, dann wählen Sie bitte die entsprechende Option aus. Bitte\n"
+"schalten Sie jedoch zuvor, falls nötig, die dafür benötigten Geräte ein,\n"
+"damit „DrakX“ sie automatisch erkennen kann.\n"
+"\n"
+"Mandrake Linux bietet Ihnen die Möglichkeit, Ihre Internet-Ver­bindung\n"
+"bereits während der Installation zu konfigurieren. Zur Auswahl stehen\n"
+"folgende Verbindungsarten: Herkömmliches Modem, ISDN Modem, ADSL\n"
+"Verbindung, Kabelmodem oder eine einfache LAN Verbindung (Ethernet).\n"
+"\n"
+"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
+"sicher, dass sie die nötigen Parameter von Ihrem Internet Provider oder\n"
+"Systemadministrator erhalten haben.\n"
+"\n"
+"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
+"im Kapitel DrakNet. Falls Sie unsicher sind, warten Sie ab, bis die\n"
+"Installation beendet ist und verwenden Sie danach das beschriebene\n"
+"Programm, um Ihre Verbindung einzurichten.\n"
+"\n"
+"Wenn Sie Ihr Netzwerk erst nach Abschluss der Installation einrichten\n"
+"wollen oder sobald Sie die Konfiguration beendet haben, klicken Sie auf\n"
+"„Abbrechen“."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"You may now choose which services you wish to start at boot time.\n"
+"\n"
+"Here are presented all the services available with the current\n"
+"installation. Review them carefully and uncheck those which are not always\n"
+"needed at boot time.\n"
+"\n"
+"You can get a short explanatory text about a service by selecting a\n"
+"specific service. However, if you are not sure whether a service is useful\n"
+"or not, it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services which you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Als nächstes können Sie die Dienste auswählen, die während des\n"
+"Betriebssystemstarts aktiviert werden sollen.\n"
+"\n"
+"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
+"zur Verfügung stehen, angezeigt. Lesen Sie diese Liste sorgfältig durch und\n"
+"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verfügung\n"
+"haben wollen.\n"
+"\n"
+"Wenn Sie einen Dienst anwählen, erhalten Sie eine kurze Erklärung dazu.\n"
+"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
+"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
+"\n"
+"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so müssen Sie an\n"
+"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
+"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
+"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
+"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
+"wirklich brauchen! !!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if your machine is to be used for programming, choose\n"
+"the desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\": installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server;\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
+"installieren wollen. Es gibt tausende von Paketen für Mandrake Linux, und\n"
+"Sie müssen sie nicht alle auswendig kennen.\n"
+"\n"
+"Wenn Sie eine klassische CD-ROM-Installation vornehmen, werden Sie zuerst\n"
+"nach den Ihnen zur Verfügung stehenden CDs gefragt (nur im Expertenmodus).\n"
+"Markieren Sie die Zeilen anhand der CDs die Sie vorliegen haben und klicken\n"
+"Sie auf die Schaltfläche „OK“.\n"
+"\n"
+"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
+"wiederum enthalten vier Abschnitte:\n"
+"\n"
+" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
+"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
+"\n"
+" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
+"wollen, sollten Sie diese Gruppe markieren.\n"
+"\n"
+" * „Server“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
+"wichtigsten Dienste auswählen, die auf Ihren Rechner installiert werden\n"
+"sollen.\n"
+"\n"
+" * „Grafische Oberfläche“: Wählen Sie hier Ihre bevorzugte grafische\n"
+"Arbeitsoberfläche. Wenn Sie eine grafische Oberfläche verwenden wollen, so\n"
+"müssen Sie hier zumindest eine Gruppe auswählen.\n"
+"\n"
+"Wenn Sie die Maus über eine Gruppe bewegen, erhalten Sie einen kurzen\n"
+"erklärenden Text über die Gruppe. Falls Sie bei einer Installation alle\n"
+"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
+"verschiedenen Minimalinstallationen wählen können.\n"
+"\n"
+" * „Mit X“ Installiert eine rudimentäre grafische Oberfläche;\n"
+"\n"
+" * „Mit minimaler Dokumentation“ Installiert das Basissystem zuzüglich\n"
+"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
+"sinnvollste Wahl für eine Serverinstallation.\n"
+"\n"
+" * „Extrem minimale Installation“ Sie erhalten eine komplett „nackte“\n"
+"Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
+"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
+"\n"
+"Wenn Sie die Schaltfläche „Fortgeschritten“ anwählen, erhalten Sie die\n"
+"Möglichkeit, eine „Individuelle Paketauswahl“ durchzuführen. Das macht nur\n"
+"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
+"darüber haben wollen, was installiert werden soll.\n"
+"\n"
+"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
+"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
+"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
+"oder repariert."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Please be patient. This operation can take several minutes."
+msgstr ""
+"Bitte gedulden Sie sich etwas. Es kann einige Minuten dauern."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
+"local time according to the time zone you selected. It is however possible\n"
+"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
+"hardware clock is the same as the system clock. This is useful when the\n"
+"machine is hosting another operating system like Windows.\n"
+"\n"
+"The \"Automatic time synchronization\" option will automatically regulate\n"
+"the clock by connecting to a remote time server on the Internet. In the\n"
+"list that is presented, choose a server located near you. Of course you\n"
+"must have a working Internet connection for this feature to work. It will\n"
+"actually install on your machine a time server which can be optionally used\n"
+"by other machines on your local network."
+msgstr ""
+"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und übersetzt diese anhand\n"
+"der Zeitzone in Ihre lokale Zeit.\n"
+"\n"
+"Da Microsoft Windows(TM) nicht sinnvoll mit GMT umgehen kann, müssen Sie\n"
+"„Nein“ wählen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
+"auf Ihrem Rechner „beherbergen“\n"
+"\n"
+"Die Verwendung der Option „Automatische Zeit-Synchronisation“ reguliert\n"
+"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
+"Wählen Sie aus der Liste einen Server in Ihrer Nähe. Damit die funktioniert\n"
+"benötigen Sie eine ständige Internetverbindung."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM and will eject the\n"
+"current CD and ask you to insert a different one as required."
+msgstr ""
+"Da die Mandrake Linux-Distribution stetig wächst, wurde sie in mehrere\n"
+"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
+"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
+"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"root\" is the system\n"
+"administrator and is the only one authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
+"easy to compromise a system.\n"
+"\n"
+"However, please do not make the password too long or complicated because\n"
+"you must be able to remember it without too much effort.\n"
+"\n"
+"The password will not be displayed on screen as you type it in. Hence, you\n"
+"will have to type the password twice to reduce the chance of a typing\n"
+"error. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will have to be used the first time you connect.\n"
+"\n"
+"In Expert mode, you will be asked if you will be connecting to an\n"
+"authentication server, like NIS or LDAP.\n"
+"\n"
+"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
+"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
+"network administrator.\n"
+"\n"
+"If your computer is not connected to any administrated network, you will\n"
+"want to choose \"Local files\" for authentication."
+msgstr ""
+"Sie können nun das »root« Passwort für Ihr Mandrake Linux System eingeben.\n"
+"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass sie\n"
+"es korrekt eingegeben haben.\n"
+"\n"
+"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
+"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
+"ändern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
+"alles! Wählen Sie deshalb das Passwort sehr sorgfältig aus! Unberechtigter\n"
+"Zugang zu diesem Kennzeichen ist extrem gefährlich für die Integrität Ihres\n"
+"Systems und der darauf enthaltenen Daten. Daher müssen Sie auch ein\n"
+"Passwort auswählen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
+"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
+"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
+"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
+"Betriebssysteme vor Fehlern sicher sind. »root« hat keine Beschränkungen.\n"
+"Er könnte beispielsweise unbeabsichtigterweise alle Daten auf allen\n"
+"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
+"zugegriffen hat!\n"
+"\n"
+"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
+"mindestens 8 Zeichen lang sein. Es sollte niemals irgendwo aufgeschrieben\n"
+"werden.\n"
+"\n"
+"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
+"es sich ohne großen Aufwand merken können.\n"
+"\n"
+"Sie müssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
+"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
+"„falsche“ Passwort bei der Verbindung mit dem System eingeben müssten.\n"
+"\n"
+"Im Expertenmodus werden Ihnen zusätzliche Optionen zur Verfügung gestellt.\n"
+"Diese hängen davon ab, ob Sie mit sich mit einem Authentifizierungsserver\n"
+"verbinden wollen oder nicht.\n"
+"\n"
+"Falls in Ihrem Netzwerk das LDAP (oder NIS) Protokoll für die\n"
+"Authentifizierung verwendet wird, wählen Sie bitte den entsprechenden\n"
+"Menüpunkt. Falls Sie nicht wissen, welches Protokoll Sie verwenden, fragen\n"
+"Sie Ihren Netzwerkadministrator.\n"
+"\n"
+"Falls Ihr Rechner nicht an einem administrierten Netzwerk hängt, wählen Sie\n"
+"bitte „Lokale Dateien“ zur Authentifizierung."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Before continuing, you should read carefully the terms of the license. It\n"
+"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
+"all the terms in it, click on the \"Refuse\" button which will immediately\n"
+"terminate the installation. To continue with the installation, click on the\n"
+"\"Accept\" button."
+msgstr ""
+"Lesen Sie bitte aufmerksam die die Lizenz, bevor Sie fortfahren. Sie\n"
+"umfasst die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen\n"
+"Punkten zustimmen, betätigen Sie bitte die Schaltfläche „Zurückweisen“, um\n"
+"die Installation abzubrechen. Um mit der Installation fortzufahren\n"
+"betätigen Sie die Schaltfläche „Akzeptieren“."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installations. If you make any changes, you must at least define a root\n"
+"partition (\"/\"). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for \"/home\"\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Oben sehen Sie die auf Ihrer Festplatte gefundenen Linux-Partitionen. Als\n"
+"normaler Linuxanwender können Sie problemlos die Vorschläge des Assistenten\n"
+"übernehmen. Sollten Sie diesen Vorschlag ändern, müssen Sie zumindest eine\n"
+"Partition als Verzeichnisbaumwurzel („/“) definieren. Wählen Sie keine zu\n"
+"kleine Partition, da sie sonst nicht genug Software installieren können.\n"
+"Falls Sie Ihre persönlichen Daten auf einer getrennten Partition speichern\n"
+"möchten, müssen Sie eine Linux-Partition für ihre persönlichen\n"
+"Verzeichnisse („/home“) definieren (Dies geht natürlich nur, wenn Sie mehr\n"
+"als nur eine Linux Partition haben).\n"
+"\n"
+"Alle Partitionen werden folgendermaßen aufgeführt: „Name“, „Kapazität“\n"
+"\n"
+"„Name“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“ und\n"
+"„Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
+"\n"
+"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
+"„sd“ wenn es eine SCSI Platte ist.\n"
+"\n"
+"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
+"Platten bedeutet:\n"
+"\n"
+" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
+"\n"
+" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
+"\n"
+" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
+"\n"
+" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“,\n"
+"\n"
+"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
+"Festplatte am Bus“, etc."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Click on \"OK\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Wählen Sie „OK“, wenn Sie alle Partitionen (damit auch alle Daten) dieser\n"
+"Festplatte löschen wollen. Achtung: durch Betätigen dieser Schaltfläche\n"
+"werden alle Daten auf der Festplatte unwiederbringlich gelöscht (auch alle\n"
+"evtl. vorhandenen Windows(TM)-Daten)!\n"
+"\n"
+"Wählen Sie „Abbruch“, um die vorhandenen Daten unangetastet zu lassen und\n"
+"die Operation abzubrechen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
+"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
+"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
+"should come back to this step for help in at least two situations:\n"
+"\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
+"of your main disk (unless you are using another boot manager), to allow you\n"
+"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
+"your system). If you need to reinstall Windows, the Microsoft install\n"
+"process will rewrite the boot sector, and then you will not be able to\n"
+"start GNU/Linux!\n"
+"\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
+"contains a fair number of system tools for restoring a system, which has\n"
+"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
+"password, or any other reason.\n"
+"\n"
+"When you click on this step, you will be asked to enter a disk inside the\n"
+"drive. The floppy disk you will insert must be empty or contain data which\n"
+"you do not need. You will not have to format it since DrakX will rewrite\n"
+"the whole disk."
+msgstr ""
+"Die Mandrake Linux CD-ROM hat einen eingebauten Rettungsmo­dus. Sie\n"
+"erreichen ihn durch Starten von CD-ROM, und Drücken von »F1« bei\n"
+"Bootbeginn. Geben Sie dann »rescue« an der Eingabeaufforderung ein. Falls\n"
+"Ihr Rechner nicht von CD-ROM starten kann, sollten Sie diesen Punkt\n"
+"unbedingt aus zwei Gründen abarbeiten:\n"
+"\n"
+" * Wenn „DrakX“ den Betriebssystemstarter installiert, schreibt es den\n"
+"Boot-Sektor (MBR) Ihrer primären Festplatte neu (außer Sie wollen einen\n"
+"anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
+"vorhandenen Betriebssysteme starten können (etwa Windows und GNU/Linux).\n"
+"Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu fragen\n"
+"- Ihren Boot-Sektor überschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
+"mehr starten können! Mit einer Startdiskette können Sie Ihr\n"
+"GNU/Linux-System dann trotzdem hochfahren und diese Änderungen rückgängig\n"
+"machen.\n"
+"\n"
+" * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
+"GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette so\n"
+"ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem enthält\n"
+"sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
+"Systemfehlern (nach einem Stromausfall, einen unglücklichen Tippfehler in\n"
+"einem Passwort, etc.) helfen werden.\n"
+"\n"
+"Wenn Sie diesen Schritt anwählen, wird „DrakX“ Sie bitten, eine Diskette in\n"
+"ein Laufwerk zu legen. Die Diskette sollte natürlich leer sein (zumindest\n"
+"keine relevanten Daten enthalten). Sie muss nicht formatiert sein, „DrakX“\n"
+"kümmert sich um alles."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Finally, depending on whether or not you selected individual packages, you\n"
+"will be presented a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right. When your selection is finished, click the \"Install\" button which\n"
+"will then launch the installation process. Depending on the speed of your\n"
+"hardware and the number of packages that need to be installed, it may take\n"
+"a while to complete the process. An estimate of the time it will take to\n"
+"install everything is displayed on the screen, to help you gauge if there\n"
+"is sufficient time to enjoy a cup of coffee.\n"
+"\n"
+"!! If a server package has been selected, either intentionally or because\n"
+"it was part of a whole group, you will be asked to confirm that you really\n"
+"want those servers to be installed. Under Mandrake Linux, any installed\n"
+"servers are started by default at boot time. Even if they are safe and have\n"
+"no known issues at the time the distribution was shipped, it may happen\n"
+"that security holes are discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default. !!\n"
+"\n"
+"The \"Automatic dependencies\" option simply disables the warning dialog\n"
+"which appears whenever the installer automatically selects a package. This\n"
+"occurs because it has determined that it needs to satisfy a dependency with\n"
+"another package in order to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows to load the\n"
+"package list chosen during a previous installation. Clicking on this icon\n"
+"will ask you to insert a floppy disk previously created at the end of\n"
+"another installation. See the second tip of last step on how to create such\n"
+"a floppy."
+msgstr ""
+"Schlussendlich erhalten Sie (falls Sie sich für „Individuelle Paketauswahl“\n"
+"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
+"gewünschten Gruppen gehören. Diese Pakete sind nach Gruppen und\n"
+"Untergruppen klassifiziert. Beim Durchstöbern des Baums, können Sie\n"
+"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
+"entfernen.\n"
+"\n"
+"Sobald Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
+"Sobald Sie die Auswahl abgeschlossen haben, bestätigen Sie das durch\n"
+"Drücken der Schaltfläche „Installation“. Nun beginnt die eigentliche\n"
+"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
+"können Sie nun getrost einen Kaffee trinken gehen.\n"
+"\n"
+"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
+"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
+"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
+"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
+"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
+"Distribution zusammengestellt wurde, keine Sicherheitslücken oder Fehler in\n"
+"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
+"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
+"hier die Rede ist, wählen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
+"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
+"Ihnen nach der Installation standardmäßig zur Verfügung. !!\n"
+"\n"
+"Die Option „Automatische Abhängigkeiten“ unterdrückt nur die Warnungen, die\n"
+"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
+"Paketabhängigkeiten aufzulösen, wenn Sie ein Paket auswählen.\n"
+"\n"
+"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
+"die während einer vorangegangenen Installation gespeicherte Paketauswahl\n"
+"erneut zu verwenden. Durch Betätigen der Schaltfläche öffnen Sie einen\n"
+"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
+"früheren Installation enthält. Um zu erfahren, wie Sie diese Diskette\n"
+"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
+"Installationsschrittes."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a filesystem).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"any of it.\n"
+"\n"
+"Click on \"OK\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"Cancel\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
+"for bad blocks on the disk."
+msgstr ""
+"Alle neu angelegten Partitionen müssen formatiert (= ein Dateisystem darauf\n"
+"erzeugt) werden, bevor Sie sie verwenden können.\n"
+"\n"
+"Möglicherweise wollen Sie auch einige bereits existierende Partitionen\n"
+"formatieren, um alle darauf vorhandenen Daten zu löschen. Falls ja,\n"
+"markieren Sie diese ebenfalls.\n"
+"\n"
+"Es sei angemerkt, dass bereits existierende Partitionen nicht erneut\n"
+"formatiert werden müssen. Sie sollten Partitionen, die Teile des\n"
+"Betriebssystems enthalten neu formatieren (etwa „/“, „/usr“ oder „/var“),\n"
+"Partitionen mit Ihren privaten Daten (normalerweise „/home“) sollten Sie\n"
+"jedoch nicht neu formatieren.\n"
+"\n"
+"Seien Sie in diesem Schritt sehr sorgfältig. Nach dem Formatieren einer\n"
+"Partition ist der komplette Inhalt unwiederbringlich gelöscht!\n"
+"\n"
+"Wählen Sie „OK“, sobald Sie bereit sind die Partitionen zu formatieren.\n"
+"\n"
+"Wählen Sie „Abbruch“, falls Sie andere Partitionen verwenden wollen, um Ihr\n"
+"Mandrake Linux darauf zu installieren.\n"
+"\n"
+"Wählen Sie „Fortgeschritten“, um die Möglichkeit zu erhalten, Partitionen\n"
+"anzugeben, die auf defekte Blöcke untersucht werden sollen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"Normally, DrakX selects the right keyboard for you (depending on the\n"
+"language you have chosen) and you won't even see this step. However, you\n"
+"might not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may still want\n"
+"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
+"located in Quebec, you may find yourself in the same situation. In both\n"
+"cases, you will have to go back to this installation step and select an\n"
+"appropriate keyboard from the list.\n"
+"\n"
+"Click on the \"More\" button to be presented with the complete list of\n"
+"supported keyboards."
+msgstr ""
+"„DrakX“ wird aufgrund Ihrer Sprachauswahl das für Sie passende\n"
+"Tastaturlayout bereits ausgewählt haben, Sie sollten diesen Schritt\n"
+"eigentlich nicht einmal angezeigt bekommen. Doch vielleicht sind Sie mit\n"
+"dieser Auswahl nicht zufrieden (wenn Sie beispielsweise eine vom Layout\n"
+"abweichende Sprache bevorzugen). Dann gehen Sie zu diesem\n"
+"Konfigurationsschritt zurück und wählen Sie ein passendes Layout aus der\n"
+"Liste.\n"
+"\n"
+"Sollten Sie eine andere als die zur gewählten Sprache gehörende Tastatur\n"
+"verwenden wollen, wählen Sie die Schaltfläche „Mehr“. Sie erhalten dann\n"
+"eine Liste aller unterstützten Tastaturen."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of drive\n"
+"(MBR)\"."
+msgstr ""
+"Sie müssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
+"GNU/Linux Distribution erstellt werden sollen.\n"
+"\n"
+"Sofern Sie nicht genau wissen, was sie machen sollen, wählen Sie „Erster\n"
+"Sektor der Platte (MBR)“"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"OK\" to reboot the system. You can start\n"
+"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
+"soon as the computer has booted up again.\n"
+"\n"
+"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"\n"
+" * \"generate auto-install floppy\": to create an installation floppy disk\n"
+"which will automatically perform a whole installation without the help of\n"
+"an operator, similar to the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"Replay\". This is a partially automated installation as the\n"
+"partitioning step (and only this one) remains interactive;\n"
+"\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a great number of similar\n"
+"machines. See the Auto install section on our web site;\n"
+"\n"
+" * \"Save packages selection\"(*): saves the package selection as done\n"
+"previously. Then, when doing another installation, insert the floppy inside\n"
+"the drive and run the installation going to the help screen by pressing on\n"
+"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
+"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
+"zwischen den auf Ihrer Platte installierten Betriebssystemen auswählen.\n"
+"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
+"\n"
+"Die Schaltfläche „Fortgeschritten“ liefert zwei weitere Schaltflächen:\n"
+"\n"
+" * „Erstellen einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
+"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
+"automatische Installation ohne Interaktion eines Administrators\n"
+"durchzuführen können.\n"
+"\n"
+"   Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
+"aktiviert haben:\n"
+"\n"
+"    * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch,\n"
+"da der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
+"vonstatten geht.\n"
+"\n"
+"    * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
+"vollständig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
+"\n"
+"   Diese Funktion ist besonders nützlich, wenn man eine Menge von\n"
+"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
+"auch auf der Seite Auto install\n"
+"\n"
+" * „Paketauswahl speichern“: (*) Sie speichern damit die Paketauswahl, die\n"
+"Sie vorher getroffen haben. Wenn Sie später eine erneute Installation\n"
+"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
+"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
+"Sie dann »linux defcfg=\"floppy\"« ein.\n"
+"\n"
+"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
+"können Sie unter GNU/Linux eine solche erstellen)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"DrakX now detects any IDE device present in your computer. It will also\n"
+"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection does not always detect a piece of hardware,\n"
+"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
+"if you know that there is a SCSI card installed in your machine. You will\n"
+"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
+"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
+"detected in your machine by selecting \"See hardware info\" and clicking\n"
+"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
+"return to the SCSI interface question.\n"
+"\n"
+"If you have to manually specify your adapter, DrakX will ask if you want to\n"
+"specify options for it. You should allow DrakX to probe the hardware for\n"
+"the card-specific options which the hardware needs to initialize. This\n"
+"usually works well.\n"
+"\n"
+"If DrakX is not able to probe for the options which need to be passed, you\n"
+"will need to provide options to the driver manually. Please review the\n"
+"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
+"Hardware'' section) for hints on retrieving the parameters required from\n"
+"hardware documentation, from the manufacturer's web site (if you have\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
+"Windows on your system)."
+msgstr ""
+"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
+"Anderem sucht „DrakX“ auch nach PCI SCSI-Karten, die es kennt, um sie\n"
+"automatisch mit dem richtigen Treiber einzubinden.\n"
+"\n"
+"Falls Sie über keinen SCSI Adapter verfügen, es sich um einen ISA SCSI\n"
+"Adapter handelt oder um einen PCI SCSI Adapter, bei dem „DrakX“ nicht weiß,\n"
+"welcher Treiber funktioniert, werden Sie gebeten, „DrakX“ zu helfen.\n"
+"\n"
+"Ist in Ihrem Rechner kein SCSI Adapter, wählen Sie einfach „Nein“. Sollten\n"
+"Sie Sich für „Ja“ entscheiden, erscheint eine Liste, aus der Sie Ihren\n"
+"Adapter auswählen können.\n"
+"\n"
+"Mussten Sie den Adapter aus der Liste wählen, fragt „DrakX“ Sie, ob Sie dem\n"
+"Modul Optionen übergeben wollen. Sie können „DrakX“ ruhig erlauben, erst\n"
+"einmal selbst zu versuchen, diese herauszufinden. In den meisten Fällen\n"
+"funktioniert das.\n"
+"\n"
+"Falls nicht, müssen Sie die Optionen angeben. Schauen Sie im\n"
+"Installationshandbuch, wie Sie diese Informationen erhalten können: etwa\n"
+"unter Windows (sofern das auf Ihren Rechner installiert ist), aus den\n"
+"Handbüchern, die sie mit dem Adapter erhalten haben oder von den Web-Seiten\n"
+"des Hardware-Anbieters (sofern Sie einen WWW-Zugang haben)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension;\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation;\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used;\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"Here, you can override this option;\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support;\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
+"selections."
+msgstr ""
+"Sie können weitere „Yaboot“ Einträge angeben, etwa für andere\n"
+"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
+"\n"
+"Für ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
+"angeben.\n"
+"\n"
+"Für Linux gibt es einige Parameter:\n"
+"\n"
+" * „Identifikator“: Es handelt sich um den Namen, den Sie an der „Yaboot“\n"
+"Eingabeaufforderung angeben müssen, um diese Alternative zu wählen.\n"
+"\n"
+" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
+"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
+"Versionsnummer.\n"
+"\n"
+" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
+"Installation.\n"
+"\n"
+" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
+"Kernparameter häufig verwendet, um die Grafikausgabe richtig zu\n"
+"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
+"klassische Apple-Mäuse von Hause aus mit 2 fehlenden Maustasten\n"
+"ausgeliefert werden. Hier einige Beispiele:\n"
+"\n"
+"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
+"Betriebssystemstart bereits zusätzliche Kern-Module zur Verfügung zu haben,\n"
+"ohne dass das Start-Gerät zur Verfügung steht oder um ein RamDisk Abbild\n"
+"für den BS-Start in Notfällen zur Verfügung zu haben.\n"
+"\n"
+" * „Größe der Init-RamDisk“: Standardmäßig ist eine RamDisk 4096 Bytes\n"
+"groß. Sollten Sie eine größere RamDisk benötigen, können Sie das mit diesem\n"
+"Parameter einstellen.\n"
+"\n"
+" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst\n"
+"im Nur-Lese-Modus eingehängt, um eine Dateisystem Verifikation durchführen\n"
+"zu können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
+"können Sie hier abstellen.\n"
+"\n"
+" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem\n"
+"problematisch erweisen, können Sie diesen Parameter verwenden um im sog.\n"
+"„novideo“-Modus, also im FrameBuffer-Modus zu starten.\n"
+"\n"
+" * „Standard“: Wählt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
+"Drücken von [Enter] an der „Yaboot“ Eingabeaufforderung gestartet bekommen.\n"
+"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drücken, erhalten Sie\n"
+"eine Liste der verfügbaren Alternativen. Der Standardeintrag wird mit einem\n"
+"Stern „*“ markiert."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive;\n"
+"\n"
+" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
+"and swap partitions in free space of your hard drive;\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
+"\n"
+"    * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk;\n"
+"\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
+"\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
+"\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning;\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes;\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
+"\n"
+" * \"Done\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the ext2fs chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Sie müssen nun entscheiden auf welche Partition(en) Ihr neues Mandrake\n"
+"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
+"(etwa von einer früheren Installation von GNU/Linux oder durch das Erzeugen\n"
+"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
+"Anderenfalls müssen Sie Partitionen definieren.\n"
+"\n"
+"Um Partitionen zu erzeugen müssen Sie erst eine Festplatte wählen. Sie\n"
+"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
+"„sda“ für die erste SCSI-Platte, usw.\n"
+"\n"
+"Um die gewählte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
+"Verfügung:\n"
+"\n"
+" * „Alles löschen“: Betätigen dieser Schaltfläche löscht alle Partitionen\n"
+"auf der markierten Festplatte.\n"
+"\n"
+" * „Automatisches Erstellen“: Diese Schaltfläche erstellt automatisch Ext2-\n"
+"und Swap-Partitionen im ungenutzten Bereich Ihrer Festplatte.\n"
+"\n"
+" * „Partitionstabelle retten“: Falls Ihre Partitionstabelle defekt ist,\n"
+"können Sie durch Drücken dieser Schaltfläche versuchen Sie wieder\n"
+"herzustellen. Seien Sie vorsichtig und denken Sie immer daran, dass dieser\n"
+"Versuch misslingen kann.\n"
+"\n"
+" * „Rückgängig“: Mit dieser Schaltfläche können Sie alle Einstellungen\n"
+"rückgängig machen.\n"
+"\n"
+" * „Neu laden“: Sie können durch Betätigen dieser Schaltfläche alle\n"
+"Einstellungen rückgängig machen und die (noch bestehende) Partitionstabelle\n"
+"neu laden.\n"
+"\n"
+" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
+"partitionieren sollen, wählen Sie diese Schaltfläche. Sie überlassen damit\n"
+"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
+"Platte partitioniert.\n"
+"\n"
+" * „Von Diskette wiederherstellen“: Falls Sie Ihre Partitionstabelle vor\n"
+"Beginn auf eine Diskette gespeichert haben, können Sie sie mittels dieser\n"
+"Schaltfläche wieder zurückschreiben.\n"
+"\n"
+" * „Auf Diskette speichern“: Falls Sie Ihre aktuelle Partitionstabelle auf\n"
+"Diskette speichern wollen, falls Sie sie später wiederherstellen wollen,\n"
+"können Sie das mit Hilfe dieser Schaltfläche tun.\n"
+"\n"
+" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
+"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
+"\n"
+"Information: Sie können alle Einstellungen per Tastatur vornehmen. Sie\n"
+"können sich mittels [Tab] und den Pfeiltasten bewegen.\n"
+"\n"
+"Wenn eine Partition ausgewählt ist, können Sie mittels:\n"
+"\n"
+" * [Strg]-[C] - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
+"Partition sind)\n"
+"\n"
+" * [Strg]-[D] - die Partition löschen\n"
+"\n"
+" * [Strg]-[M] - dem Einhängpunkt festlegen\n"
+"\n"
+"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
+"eine mindestens 1 MB große HFS Start-Partition für den\n"
+"Betriebssystemstarter „Yaboot“ erstellen. Wenn Sie diese Partition etwas\n"
+"größer dimensionieren, etwa 50 MB, haben Sie einen geeigneten Platz, um\n"
+"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
+"können."
+
diff --git a/perl-install/share/po/help-es.pot b/perl-install/share/po/help-es.pot
new file mode 100644
index 000000000..2b76535c2
--- /dev/null
+++ b/perl-install/share/po/help-es.pot
@@ -0,0 +1,1898 @@
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+msgstr ""
+"LILO (el LInux LOader) y grub son cargadores de arranque: permiten arrancar\n"
+"ya sea GNU/Linux como cualquier otro sistema operativo presente en su\n"
+"computadora. Normalmente, estos otros sistemas operativos se detectan e\n"
+"instalan correctamente. Si este no es el caso, puede añadir una entrada a\n"
+"mano en esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
+"\n"
+"Tambien puede no desear dar acceso a estos otros sistemas operativos a\n"
+"cualquiera. En ese caso, puede borrar las entradas correspondientes. Pero\n"
+"entonces, ¡necesitará un disquete de arranque para poder arrancar esos\n"
+"otros sistemas operativos!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Please choose your preferred language for installation and system usage.\n"
+"\n"
+"Clicking on the \"Advanced\" button will allow you to select other\n"
+"languages to be installed on your workstation. Selecting other languages\n"
+"will install the language-specific files for system documentation and\n"
+"applications. For example, if you will host users from Spain on your\n"
+"machine, select English as the main language in the tree view and in the\n"
+"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"\n"
+"Note that multiple languages may be installed. Once you have selected any\n"
+"additional locales, click the \"OK\" button to continue."
+msgstr ""
+"Por favor, elija su idioma preferido para la instalación y el uso del\n"
+"sistema.\n"
+"\n"
+"Al hacer clic sobre el botón \"Avanzado\" podrá seleccionar otros idiomas\n"
+"para instalar en su estación de trabajo. Seleccionar otros idiomas\n"
+"instalará los archivos específicos para la documentación del sistema y las\n"
+"aplicaciones. Por ejemplo, si albergará a gente de Francia en su máquina,\n"
+"seleccione Español como idioma principal en la vista de árbol y en la\n"
+"sección avanzada haga clic sobre la estrella gris que corresponde a\n"
+"\"Frances|Francia\".\n"
+"\n"
+"Note que se pueden instalar múltiples idiomas. Una vez que ha seleccionado\n"
+"cualquier idioma adicional haga clic sobre el botón \"Aceptar\" para\n"
+"continuar."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"At this point, you need to choose where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space, you will\n"
+"need to partition it. Basically, partitioning a hard drive consists of\n"
+"logically dividing it to create space to install your new Mandrake Linux\n"
+"system.\n"
+"\n"
+"Because the partitioning process' effects are usually irreversible,\n"
+"partitioning can be intimidating and stressful if you are an inexperienced\n"
+"user. Fortunately, there is a wizard which simplifies this process. Before\n"
+"beginning, please consult the manual and take your time.\n"
+"\n"
+"If you are running the installation in Expert mode, you will enter\n"
+"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
+"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
+"From the installation interface, you can use the wizards as described here\n"
+"by clicking the dialog's \"Wizard\" button.\n"
+"\n"
+"If partitions have already been defined, either from a previous\n"
+"installation or from another partitioning tool, simply select those to\n"
+"install your Linux system.\n"
+"\n"
+"If partitions are not defined, you will need to create them using the\n"
+"wizard. Depending on your hard drive configuration, several options are\n"
+"available:\n"
+"\n"
+" * \"Use free space\": this option will simply lead to an automatic\n"
+"partitioning of your blank drive(s). You will not be prompted further;\n"
+"\n"
+" * \"Use existing partition\": the wizard has detected one or more existing\n"
+"Linux partitions on your hard drive. If you want to use them, choose this\n"
+"option;\n"
+"\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
+"be performed without the loss of any data, provided you previously\n"
+"defragment the Windows partition. Backing up your data won't hurt either..\n"
+"This solution is recommended if you want to use both Mandrake Linux and\n"
+"Microsoft Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
+"\n"
+" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
+"present on your hard drive and replace them with your new Mandrake Linux\n"
+"system, choose this option. Be careful with this solution because you will\n"
+"not be able to revert your choice after you confirm;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Remove Windows\": this will simply erase everything on the drive and\n"
+"begin fresh, partitioning everything from scratch. All data on your disk\n"
+"will be lost;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Expert mode\": choose this option if you want to manually partition\n"
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
+msgstr ""
+"Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n"
+"sistema operativo Mandrake Linux. Si su disco rígido está vacío o si un\n"
+"sistema operativo existente está utilizando todo el espacio disponible,\n"
+"necesitará particionar el disco. Básicamente, particionar un disco rígido\n"
+"consiste en dividirlo lógicamente para crear espacio para instalar su\n"
+"sistema Mandrake Linux nuevo.\n"
+"\n"
+"Debido a que los efectos del particionado por lo general son irreversibles,\n"
+"el particionado puede ser intimidante y estresante si Usted es un usuario\n"
+"inexperto. Por fortuna, hay un asistente que simplifica este proceso. Antes\n"
+"de comenzar, por favor consulte el manual y tómese su tiempo.\n"
+"\n"
+"Si está corriendo la instalación en modo Experto, ingresará a DiskDrake, la\n"
+"herramienta de particionado de Mandrake Linux, que le permite un ajuste\n"
+"fino de sus particiones. Vea la sección DiskDrake en la \"Guía del\n"
+"Usuario\". Desde la interfaz de instalación, puede utilizar los asistentes\n"
+"como se describe aquí haciendo clic sobre el botón \"Asistente\" del\n"
+"diálogo.\n"
+"\n"
+"Si ya se han definido particiones, ya sea de una instalación previa o por\n"
+"medio de otra herramienta de particionado, simplemente seleccione esas para\n"
+"instalar su sistema Linux.\n"
+"\n"
+"Si no hay particiones definidas, necesitará crearlas usando el asistente.\n"
+"Dependiendo de la configuración de su disco rígido, están disponibles\n"
+"varias opciones:\n"
+"\n"
+" * \"Usar espacio libre\": esta opción simplemente llevará a un\n"
+"particionado automático de su(s) disco(s) vacío(s). No se le pedirán más\n"
+"detalles ni se le formularán más preguntas.\n"
+"\n"
+" * \"Usar partición existente\": el asistente ha detectado una o más\n"
+"particiones Linux existentes en su disco rígido. Si desea utilizarlas,\n"
+"elija esta opción.\n"
+"\n"
+" * \"Usar el espacio libre en la partición Windows\": si Microsoft Windows\n"
+"está instalado en su disco rígido y ocupa todo el espacio disponible en el\n"
+"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
+"hacerlo, puede borrar su partición y datos Microsoft Windows (vea las\n"
+"soluciones \"Borrar el disco completo\" o \"Modo experto\") o cambie el\n"
+"tamaño de su partición Windows. El cambio de tamaño se puede realizar sin\n"
+"la perdida de datos, siempre y cuando Usted ha desfragmentado con\n"
+"anterioridad la partición Windows. Tambien se recomienda hacer una copia de\n"
+"respaldo de sus datos.. Se recomienda esta solución si desea utilizar tanto\n"
+"Mandrake Linux como Microsoft Windows en la misma computadora.\n"
+"\n"
+"   Antes de elegir esta opción, por favor comprenda que despues de este\n"
+"procedimiento, el tamaño de su partición Microsoft Windows será más pequeño\n"
+"que ahora. Tendrá menos espacio bajo Microsoft Windows para almacenar sus\n"
+"datos o instalar software nuevo.\n"
+"\n"
+" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
+"particiones presentes en su disco rígido y reemplazarlas con su nuevo\n"
+"sistema Mandrake Linux, elija esta opción. Tenga cuidado con esta solución\n"
+"ya que no podrá revertir su elección despues de confirmarla.\n"
+"\n"
+"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
+"\n"
+" * \"Quitar Windows\": simplemente esto borrará todo en el disco y\n"
+"comenzará particionando todo desde cero. Se perderán todos los datos en su\n"
+"disco.\n"
+"\n"
+"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
+"\n"
+" * \"Modo experto\": elija esta opción si desea particionar manualmente su\n"
+"disco rígido. Tenga cuidado - esta es una elección potente pero peligrosa.\n"
+"Puede perder todos sus datos con facilidad. Por lo tanto, no elija esta\n"
+"opción a menos que sepa lo que está haciendo."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
+"will try to configure X automatically.\n"
+"\n"
+"It is extremely rare for it to fail, unless the hardware is very old (or\n"
+"very new). If it succeeds, it will start X automatically with the best\n"
+"resolution possible, depending on the size of the monitor. A window will\n"
+"then appear and ask you if you can see it.\n"
+"\n"
+"If you are doing an \"Expert\" installation, you will enter the X\n"
+"configuration wizard. See the corresponding section of the manual for more\n"
+"information about this wizard.\n"
+"\n"
+"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
+"will proceed to the next step. If you cannot see the message, it simply\n"
+"means that the configuration was wrong and the test will automatically end\n"
+"after 10 seconds, restoring the screen."
+msgstr ""
+"X (por X Window System) es el corazón de la interfaz gráfica de GNU/Linux\n"
+"en el que se apoyan todos los entornos gráficos (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta sección,\n"
+"DrakX intentará configurar a X automáticamente.\n"
+"\n"
+"Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
+"antiguo (o muy nuevo). Si no falla, arrancará X automáticamente con la\n"
+"mejor resolución posible dependiendo del tamaño de su monitor. Luego\n"
+"aparecerá una ventana que le pregunta si la puede ver.\n"
+"\n"
+"Si está haciendo una instalación en modo \"Experto\", ingresará al\n"
+"asistente de configuración de X. Para más información sobre este asistente\n"
+"vea la sección correspondiente del manual.\n"
+"\n"
+"Si puede ver el mensaje y responde \"Sí\", entonces DrakX continuará con el\n"
+"paso siguiente. Si no puede ver el mensaje, simplemente significa que la\n"
+"configuración no era la correcta y la prueba terminará automáticamente\n"
+"luego de 10 segundos, restaurando la pantalla."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Your new Mandrake Linux operating system is currently being installed.\n"
+"Depending on the number of packages you will be installing and the speed of\n"
+"your computer, this operation could take from a few minutes to a\n"
+"significant amount of time.\n"
+"\n"
+"Please be patient."
+msgstr ""
+"En este momento se está instalando su sistema operativo Mandrake Linux\n"
+"nuevo. Dependiendo de la cantidad de paquetes que instalará y de la\n"
+"velocidad de su computadora, esta operación puede tomar desde unos pocos\n"
+"minutos hasta una cantidad de tiempo significativa.\n"
+"\n"
+"Por favor, tenga paciencia."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"Elija la unidad de disco que desea borrar para instalar su partición\n"
+"Mandrake Linux nueva. Tenga cuidado, ¡se perderán todos los datos de la\n"
+"misma y no se podrán recuperar!."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"GNU/Linux is a multiuser system, and this means that each user can have his\n"
+"own preferences, his own files and so on. You can read the ``User Guide''\n"
+"to learn more. But unlike \"root\", which is the administrator, the users\n"
+"you will add here will not be entitled to change anything except their own\n"
+"files and their own configuration. You will have to create at least one\n"
+"regular user for yourself. That account is where you should log in for\n"
+"routine use. Although it is very practical to log in as \"root\" everyday,\n"
+"it may also be very dangerous! The slightest mistake could mean that your\n"
+"system would not work any more. If you make a serious mistake as a regular\n"
+"user, you may only lose some information, but not the entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
+"as you can actually enter whatever you want. DrakX will then take the first\n"
+"word you have entered in the box and will bring it over to the \"User\n"
+"name\". This is the name this particular user will use to log onto the\n"
+"system. You can change it. You then have to enter a password here. A\n"
+"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
+"from a security point of view, but that is no reason to neglect it: after\n"
+"all, your files are at risk.\n"
+"\n"
+"If you click on \"Accept user\", you can then add as many as you want. Add\n"
+"a user for each one of your friends: your father or your sister, for\n"
+"example. When you finish adding all the users you want, select \"Done\".\n"
+"\n"
+"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
+"for that user (bash by default)."
+msgstr ""
+"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
+"puede tener sus preferencias propias, sus archivos propios, y así\n"
+"sucesivamente. Puede leer la \"Guía del Usuario\" para aprender más. Pero,\n"
+"a diferencia de \"root\", que es el administrador, los usuarios que agregue\n"
+"aquí no podrán cambiar nada excepto su configuración y sus archivos\n"
+"propios. Tendrá que crear al menos un usuario no privilegiado para Usted\n"
+"mismo. Esa cuenta es donde debería conectarse para el uso diario. Aunque es\n"
+"muy práctico ingresar como \"root\" diariamente, ¡tambien puede ser muy\n"
+"peligroso! El error más leve podría significar que su sistema deje de\n"
+"funcionar. Si comete un error serio como usuario no privilegiado, sólo\n"
+"puede llegar a perder algo de información, pero no todo el sistema.\n"
+"\n"
+"Primero tendrá que ingresar su nombre real. Esto no es obligatorio, por\n"
+"supuesto - ya que, en realidad, puede ingresar lo que desee. DrakX tomará\n"
+"entonces la primer palabra que ingresó y la copiará al campo \"Nombre de\n"
+"usuario\". Este es el nombre que este usuario en particular usará para\n"
+"ingresar al sistema. Lo puede cambiar. Luego tendrá que ingresar una\n"
+"contraseña aquí. La contraseña de un usuario no privilegiado (regular) no\n"
+"es tan crucial como la de \"root\" desde el punto de vista de la seguridad,\n"
+"pero esto no es razón alguna para obviarla - despues de todo, son sus\n"
+"archivos los que están en riesgo.\n"
+"\n"
+"Si hace clic sobre \"Aceptar usuario\", entonces puede agregar tantos como\n"
+"desee. Agregue un usuario para cada uno de sus amigos: por ejemplo su padre\n"
+"o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
+"desee, seleccione \"Hecho\".\n"
+"\n"
+"Hacer clic sobre el botón \"Avanzadas\" le permite cambiar el \"shell\"\n"
+"predeterminado para ese usuario (bash por defecto)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Finally, you will be asked whether you want to see the graphical interface\n"
+"at boot. Note this question will be asked even if you chose not to test the\n"
+"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
+"act as a server, or if you were not successful in getting the display\n"
+"configured."
+msgstr ""
+"Finalmente, se le preguntará si desea ver la interfaz gráfica en el\n"
+"arranque. Note que esta pregunta se le formula incluso si eligió no probar\n"
+"la configuración. Obviamente, querrá responder \"No\" si su máquina va a\n"
+"actuar como un servidor, o si no tuvo exito con la configuración de la\n"
+"pantalla."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful to\n"
+"choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt;\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information;\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt;\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
+"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
+"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
+"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
+"esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
+"\n"
+"Las opciones principales de Yaboot son:\n"
+"\n"
+" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
+"prompt de arranque.\n"
+"\n"
+" * Dispositivo de arranque: indica donde desea colocar la información\n"
+"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
+"partición bootstrap con anterioridad para contener esta información.\n"
+"\n"
+" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
+"disponibles con Yaboot. La primera se mide en segundos y aquí puede elegir\n"
+"entre CD, arranque OF, MacOS o Linux.\n"
+"\n"
+" * Demora de arranque del núcleo: esta demora es similar a la demora de\n"
+"arranque de LILO. Luego de seleccionar Linux, tendrá esta demora en decimas\n"
+"de segundo antes que se seleccione su descripción del núcleo\n"
+"predeterminada.\n"
+"\n"
+" * ¿Habilitar arranque desde el CD?: marcando esta opción Usted puede\n"
+"elegir \"C\" para el CD en el primer prompt de arranque.\n"
+"\n"
+" * ¿Habilitar arranque OF?: marcando esta opción Usted puede elegir \"N\"\n"
+"para Open Firmware en el primer prompt de arranque.\n"
+"\n"
+" * SO predeterminado: puede seleccionar que sistema operativo arrancará por\n"
+"defecto cuando expira la demora de Open Firmware."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"At this point, it is time to choose the security level desired for the\n"
+"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
+"the data stored in it is crucial, the higher the security level should be.\n"
+"However, a higher security level is generally obtained at the expense of\n"
+"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
+"to get more information about the meaning of these levels.\n"
+"\n"
+"If you do not know what to choose, keep the default option."
+msgstr ""
+"En este punto, es tiempo de elegir el nivel de seguridad deseado para su\n"
+"máquina. Como regla general, cuanto más expuesta está la máquina, y cuantos\n"
+"más cruciales sean los datos que tenga almacenados el nivel de seguridad en\n"
+"la misma deberá ser más alto. Sin embargo, un nivel de seguridad más alto\n"
+"generalmente se obtiene a expensas de la facilidad de uso. Consulte el\n"
+"capítulo \"msec\" del \"Manual de Referencia\" para obtener más información\n"
+"sobre el significado de dichos niveles.\n"
+"\n"
+"Si no sabe que elegir, mantenga la opción predeterminada."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
+"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Here are presented various parameters concerning your machine. Depending on\n"
+"your installed hardware, you may - or not, see the following entries:\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary;\n"
+"\n"
+" * \"Keyboard\": check the current keyboard map configuration and click on\n"
+"the button to change that if necessary;\n"
+"\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
+"\n"
+" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"configuration wizard;\n"
+"\n"
+" * \"Sound card\": if a sound card is detected on your system, it is\n"
+"displayed here. No modification possible at installation time;\n"
+"\n"
+" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+"here. No modification possible at installation time;\n"
+"\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+"displayed here. You can click on the button to change the parameters\n"
+"associated with it."
+msgstr ""
+"Aquí se le presentan varios parámetros que conciernen a su máquina.\n"
+"Dependiendo de su hardware instalado, puede - o no, ver las entradas\n"
+"siguientes:\n"
+"\n"
+" * \"Ratón\": verifique la configuración del ratón y haga clic sobre el\n"
+"botón para cambiarla, si es necesario.\n"
+"\n"
+" * \"Teclado\": verifique la configuración de la disposición del teclado y\n"
+"haga clic sobre el botón para cambiarla, si es necesario.\n"
+"\n"
+" * \"Huso horario\": DrakX, de manera predeterminada, adivina su huso\n"
+"horario a partir del idioma que Usted ha elegido. Pero nuevamente, al igual\n"
+"que con la elección del teclado, puede ocurrir que no se encuentre en el\n"
+"país que sugiere el idioma elegido. De ser así, puede necesitar hacer clic\n"
+"sobre el botón \"Huso horario\" para configurar el reloj de acuerdo al huso\n"
+"horario en el que se encuentre.\n"
+"\n"
+" * \"Impresora\": al hacer clic sobre el botón \"Sin impresora\" se abrirá\n"
+"el asistente de configuración de la impresora.\n"
+"\n"
+" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su\n"
+"sistema, la misma se muestra aquí. Durante la instalación no es posible\n"
+"modificación alguna.\n"
+"\n"
+" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
+"misma se muestra aquí. Durante la instalación no es posible modificación\n"
+"alguna.\n"
+"\n"
+" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
+"se muestra aquí. Puede hacer clic sobre el botón para cambiar los\n"
+"parámetros asociados a la misma."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
+"installation or if you want to have greater control (\"Expert\"). You can\n"
+"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
+"system:\n"
+"\n"
+" * \"Install\": completely wipes out the old system. In fact, depending on\n"
+"what currently holds your machine, you will be able to keep some old (Linux\n"
+"or other) partitions unchanged;\n"
+"\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
+"\n"
+" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
+"existing Mandrake Linux system while keeping all system configurations\n"
+"unchanged. Adding new packages to the current installation is also\n"
+"possible.\n"
+"\n"
+"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
+"release.\n"
+"\n"
+"Depending on your knowledge of GNU/Linux, select one of the following\n"
+"choices:\n"
+"\n"
+" * Recommended: choose this if you have never installed a GNU/Linux\n"
+"operating system. The installation will be very easy and you will only be\n"
+"asked a few questions;\n"
+"\n"
+" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
+"installation class. The expert installation will allow you to perform a\n"
+"highly-customized installation. Answering some of the questions can be\n"
+"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
+"choose this unless you know what you are doing."
+msgstr ""
+"DrakX ahora necesita saber si desea realizar una instalación por defecto\n"
+"(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). Tambien\n"
+"puede elegir realizar una instalación nueva o una actualización de un\n"
+"sistema Mandrake Linux existente:\n"
+"\n"
+" * \"Instalar\": el sistema anterior se borrará por completo. De hecho,\n"
+"dependiendo de lo que su máquina contiene actualmente, podrá mantener\n"
+"algunas particiones antiguas (Linux u otras) sin cambios;\n"
+"\n"
+" * \"Actualización\": esta clase de instalación le permite simplemente\n"
+"actualizar los paquetes que en este momento están instalados en su sistema\n"
+"Mandrake Linux. La misma mantiene las particiones corrientes de sus discos\n"
+"así como tambien las configuraciones de usuarios. Todos los otros pasos de\n"
+"instalación permanecen disponibles con respecto a la instalación simple;\n"
+"\n"
+" * \"Sólo actualizar paquetes\": esta clase completamente nueva le permite\n"
+"actualizar un sistema Mandrake Linux existente a la vez que mantiene todas\n"
+"las configuraciones del sistema sin cambios. Tambien es posible añadir\n"
+"paquetes nuevos a la instalación corriente.\n"
+"\n"
+"Las actualizaciones deberían funcionar sin problemas para los sistemas\n"
+"Mandrake Linux comenzando desde la versión \"8.1\".\n"
+"\n"
+"Dependiendo de su conocimiento de GNU/Linux, por favor elija una de los\n"
+"opciones siguientes:\n"
+"\n"
+" * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
+"GNU/Linux. La instalación será muy fácil y sólo se le formularán unas pocas\n"
+"preguntas;\n"
+"\n"
+" * Experto: si tiene un conocimiento bueno de GNU/Linux, puede elegir esta\n"
+"clase de instalación. La instalación experta le permitirá realizar una\n"
+"instalación altamente personalizada. Contestar a algunas de las preguntas\n"
+"puede ser difícil si no tiene un buen conocimiento de GNU/Linux, entonces\n"
+"no elija esto a menos que sepa lo que está haciendo."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Some bugs may have\n"
+"been fixed, and security issues solved. To allow you to benefit from these\n"
+"updates, you are now proposed to download them from the Internet. Choose\n"
+"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
+"to install updated packages later.\n"
+"\n"
+"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"retrieved. Choose the one nearest you. Then a package-selection tree\n"
+"appears: review the selection, and press \"Install\" to retrieve and\n"
+"install the selected package(s), or \"Cancel\" to abort."
+msgstr ""
+"Puede ser que cuando está instalando Mandrake Linux algunos paquetes se\n"
+"hayan actualizado desde la publicación inicial. Se pueden haber corregido\n"
+"algunos errores, y solucionado problemas de seguridad. Para permitir que\n"
+"Usted se beneficie de estas actualizaciones, ahora se le propone\n"
+"transferirlas desde la Internet. Elija \"Sí\" si tiene funcionando una\n"
+"conexión con la Internet, o \"No\" si prefiere instalar los paquetes\n"
+"actualizados más tarde.\n"
+"\n"
+"Si elije \"Sí\" se muestra una lista de lugares desde los que se pueden\n"
+"obtener las actualizaciones. Elija el más cercano a Usted. Luego aparece un\n"
+"árbol de selección de paquetes: revise la selección y presione \"Instalar\"\n"
+"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
+"abortar."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
+"accordingly, depending on what it finds here:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
+"OS;\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If in doubt, DrakX will display a dialog with various options.\n"
+"\n"
+" * \"Bootloader to use\": you have three choices:\n"
+"\n"
+"    * \"GRUB\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
+"interface.\n"
+"\n"
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
+"interface.\n"
+"\n"
+" * \"Boot device\": in most cases, you will not change the default\n"
+"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
+"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"\n"
+" * \"Delay before booting the default image\": when rebooting the computer,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"another boot entry than the default one.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
+"Linux system! Also, be sure you know what you do before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
+"options, which are reserved to the expert user.\n"
+"\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options which will be available at boot time will be displayed.\n"
+"\n"
+"If there is another operating system installed on your machine, it will\n"
+"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
+"the existing options. Select an entry and click \"Modify\" to modify or\n"
+"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"installation step."
+msgstr ""
+"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
+"etapa está completamente automatizada. De hecho, DrakX analiza el sector de\n"
+"arranque del disco y actúa en función de lo que encuentre allí:\n"
+"\n"
+" * si encuentra un sector de arranque de Windows, lo reemplazará con un\n"
+"sector de arranque de grub/LILO de forma tal que Usted pueda arrancar\n"
+"GNU/Linux u otro sistema operativo;\n"
+"\n"
+" * si encuentra un sector de arranque de grub o LILO, lo reemplazará con\n"
+"uno nuevo;\n"
+"\n"
+"En caso de duda, DrakX mostrará un diálogo con varias opciones.\n"
+"\n"
+" * \"Cargador de arranque a usar\": tiene tres opciones:\n"
+"\n"
+"    * \"LILO con menú gráfico\": si prefiere a LILO con su interfaz\n"
+"gráfica.\n"
+"\n"
+"    * \"GRUB\": si prefiere a grub (menú de texto).\n"
+"\n"
+"    * \"LILO con menú de texto\": si prefiere a LILO con su interfaz de\n"
+"texto.\n"
+"\n"
+" * \"Dispositivo de arranque\": en la mayoría de los casos, no cambiará lo\n"
+"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
+"se puede instalar en el segundo disco rígido (\"/dev/hdb\"), o incluso en\n"
+"un disquete (\"/dev/fd0\").\n"
+"\n"
+" * \"Demora antes de arrancar la imagen predeterminada\": cuando vuelve a\n"
+"arrancar la computadora, esta es la demora que se garantiza al usuario para\n"
+"elegir - en el menú del cargador de arranque, una entrada distinta a la\n"
+"predeterminada.\n"
+"\n"
+"!! Tenga presente que si no elige instalar un cargador de arranque\n"
+"(seleccionando \"Cancelar\"), ¡Debe asegurarse que tiene una forma de\n"
+"arrancar a su sistema Mandrake Linux! Tambien debe asegurarse que sabe lo\n"
+"que hace antes de cambiar cualquier opción. !!\n"
+"\n"
+"Haciendo clic sobre el botón \"Avanzadas\" en este diálogo se le ofrecerán\n"
+"muchas opciones avanzadas que están reservadas para el usuario experto.\n"
+"\n"
+"Luego que haya configurado los parámetros generales del cargador de\n"
+"arranque se mostrará la lista de opciones de arranque que estarán\n"
+"disponibles al momento de arrancar.\n"
+"\n"
+"Si hay otro sistema operativo instalado en su máquina, se agregará el mismo\n"
+"automáticamente al menú de arranque. Aquí puede elegir ajustar las opciones\n"
+"existentes. Seleccione una entrada y haga clic sobre \"Modificar\" para\n"
+"cambiar los parámetros de la misma o quitarla; \"Añadir\" crea una entrada\n"
+"nueva; y \"Hecho\" va al paso de instalación siguiente."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Se ha detectado más de una partición Microsoft Windows en su disco rígido.\n"
+"Por favor, elija aquella a la cual desea cambiarle el tamaño para poder\n"
+"instalar su sistema operativo Mandrake Linux nuevo.\n"
+"\n"
+"Cada partición se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
+"\"Capacidad\".\n"
+"\n"
+"\"Nombre Linux\" está estructurado: \"tipo de disco rígido\", \"número de\n"
+"disco rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco rígido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco rígido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc.\n"
+"\n"
+"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
+"primer disco o partición se denomina \"C:\")."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Here, we select a printing system for your computer. Other OSs may offer\n"
+"you one, but Mandrake Linux offers three.\n"
+"\n"
+" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+"a direct connection to your printer and you want to be able to panic out of\n"
+"printer jams, and you do not have networked printers. It will handle only\n"
+"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
+"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
+"after installation by running PrinterDrake from the Mandrake Control Center\n"
+"and clicking the expert button.\n"
+"\n"
+" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+"your local printer and also halfway-around the planet. It is simple and can\n"
+"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
+"it is compatible with the systems that went before. It can do many tricks,\n"
+"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
+"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
+"graphical front-ends for printing or choosing printer options.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
+"approximately the same things the others can do, but it will print to\n"
+"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
+"and it can print directly to shell commands. If you have need of Novell or\n"
+"printing to commands without using a separate pipe construct, use lprNG.\n"
+"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
+"networks."
+msgstr ""
+"Aquí seleccionamos un sistema de impresión para que use su computadora.\n"
+"Otros sistemas operativos pueden ofrecerle uno, pero Mandrake Linux le\n"
+"ofrece tres.\n"
+"\n"
+" * \"pdq\" - \"print, don't queue\" (imprimir sin poner en cola), es la\n"
+"elección si Usted tiene una conexión directa a su impresora y desea evitar\n"
+"el pánico de los papeles trabados, y no tiene impresora en red alguna.\n"
+"Manejará sólo casos de red muy simples y es algo lento para las redes.\n"
+"Elija \"pdq\" si esta es su luna de miel con GNU/Linux. Despues de la\n"
+"instalación puede cambiar sus elecciones ejecutando PrinterDrake desde el\n"
+"Centro de Control Mandrake y eligiendo el modo experto.\n"
+"\n"
+" * \"CUPS\" - \"Common Unix Printing System\" (Sistema de Impresión Común\n"
+"de Unix) es excelente imprimiendo en su impresora local y tambien en la\n"
+"otra punta del planeta. Es simple y puede actuar como servidor o cliente\n"
+"para el sistema de impresión antiguo \"lpd\", por lo que es compatible con\n"
+"los sistemas anteriores. Puede hacer muchas cosas, pero la configuración\n"
+"básica es tan simple como la de \"pdq\". Si necesita que emule a un\n"
+"servidor \"lpd\", debe encender el demonio \"cups-lpd\". Tiene interfaces\n"
+"gráficas para imprimir o elegir las opciones de la impresora.\n"
+"\n"
+" * \"lprNG\" - \"line printer daemon New Generation\" (servidor de\n"
+"impresora de líneas Nueva Generación). Este sistema puede hacer\n"
+"aproximadamente las mismas cosas que los otros, pero imprimirá en\n"
+"impresoras montadas sobre una red Novell, debido a que soporta el protocolo\n"
+"IPX, y puede imprimir directamente a comandos del shell. Si necesita Novell\n"
+"o imprimir a comandos de sin utilizar tuberías, utilice lprNG. De no ser\n"
+"así, se prefiere a CUPS ya que es más simple y es mejor al trabajar sobre\n"
+"redes."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"The first time you try the X configuration, you may not be very satisfied\n"
+"with its display (screen is too small, shifted left or right...). Hence,\n"
+"even if X starts up correctly, DrakX then asks you if the configuration\n"
+"suits you. It will also propose to change it by displaying a list of valid\n"
+"modes it could find, asking you to select one.\n"
+"\n"
+"As a last resort, if you still cannot get X to work, choose \"Change\n"
+"graphics card\", select \"Unlisted card\", and when prompted on which\n"
+"server, choose \"FBDev\". This is a failsafe option which works with any\n"
+"modern graphics card. Then choose \"Test again\" to be sure."
+msgstr ""
+"La primera vez que intenta la configuración de X Usted puede no estar muy\n"
+"satisfecho con el resultado (la pantalla es muy pequeña, está corrida hacia\n"
+"la izquierda o hacia la derecha...). Es por esto que, incluso si X arranca\n"
+"correctamente, DrakX le preguntará si la configuración le conviene. Tambien\n"
+"propondrá cambiarla mostrando una lista de modos válidos que pudo\n"
+"encontrar, y le pedirá que seleccione alguno.\n"
+"\n"
+"Como último recurso, si todavía no puede hacer que X funcione, elija\n"
+"\"Cambiar la tarjeta gráfica\", seleccione \"Tarjeta no listada\", y cuando\n"
+"se le pregunte acerca de que servidor desea elija \"FBDev\". Esta es una\n"
+"opción a prueba de fallos que funciona con cualquier tarjeta gráfica\n"
+"moderna. Luego elija \"Probar nuevamente\" para estar seguro que funciona."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"DrakX generally detects the number of buttons your mouse has. If not, it\n"
+"assumes you have a two-button mouse and will set it up for third-button\n"
+"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
+"USB mouse.\n"
+"\n"
+"If you wish to specify a different type of mouse select the appropriate\n"
+"type from the provided list.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct. If the mouse is not working well, press the space bar or [Return]\n"
+"to \"Cancel\" and choose again."
+msgstr ""
+"DrakX generalmente detecta la cantidad de botones que tiene su ratón. Si\n"
+"no, asume que Usted tiene un ratón de dos botones y lo configurará para que\n"
+"emule el tercer botón. DrakX sabrá automáticamente si es un ratón PS/2,\n"
+"serie o USB.\n"
+"\n"
+"Si desea especificar un tipo de ratón diferente, seleccione el tipo\n"
+"apropiado de la lista que se proporciona.\n"
+"\n"
+"Si elije un ratón distinto al predeterminado, se le presentará una pantalla\n"
+"de prueba. Use los botones y la rueda para verificar que la configuración\n"
+"es correcta. Si el ratón no está funcionando correctamente, presione la\n"
+"barra espaciadora o [Intro] para \"Cancelar\" y vuelva a elegir."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"You are now proposed to set up your Internet/network connection. If you\n"
+"wish to connect your computer to the Internet or to a local network, click\n"
+"\"OK\". The autodetection of network devices and modem will be launched. If\n"
+"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
+"may also choose not to configure the network, or do it later; in that case,\n"
+"simply click the \"Cancel\" button.\n"
+"\n"
+"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"Here, we will not detail each configuration. Simply make sure that you have\n"
+"all the parameters from your Internet Service Provider or system\n"
+"administrator.\n"
+"\n"
+"You can consult the ``User Guide'' chapter about Internet connections for\n"
+"details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection.\n"
+"\n"
+"If you wish to configure the network later after installation, or if you\n"
+"are finished configuring your network connection, click \"Cancel\"."
+msgstr ""
+"Ahora se le propone configurar su conexión de red/Internet. Si desea\n"
+"conectar su computadora a la Internet o a una red de área local, haga clic\n"
+"sobre \"Aceptar\". Se lanzará la detección automática de dispositivos de\n"
+"red y módems. Si esta detección falla, quite la marca de la casilla \"Usar\n"
+"detección automática\" la próxima vez. Tambien puede elegir no configurar\n"
+"la red, o hacerlo más tarde; en ese caso simplemente haga clic sobre el\n"
+"botón \"Cancelar\".\n"
+"\n"
+"Los tipos de conexión disponibles son: módem tradicional, módem RDSI\n"
+"(ISDN), conexión ADSL, cable módem, y finalmente una simple conexión LAN\n"
+"(Ethernet).\n"
+"\n"
+"Aquí no entraremos en detalle en cada configuración. Simplemente debe\n"
+"asegurarse que su Proveedor de Servicios de Internet o su administrador del\n"
+"sistema le proporcionaron todos los parámetros de configuración.\n"
+"\n"
+"Puede consultar el capítulo de \"Guía del Usuario\" sobre las conexiones a\n"
+"la Internet para detalles acerca de la configuración, o simplemente esperar\n"
+"hasta que su sistema este instalado y usar el programa que se describe aquí\n"
+"para configurar su conexión.\n"
+"\n"
+"Si desea configurar la red más tarde, luego de la instalación, o si ha\n"
+"finalizado de configurar su conexión de red, haga clic sobre \"Cancelar\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"You may now choose which services you wish to start at boot time.\n"
+"\n"
+"Here are presented all the services available with the current\n"
+"installation. Review them carefully and uncheck those which are not always\n"
+"needed at boot time.\n"
+"\n"
+"You can get a short explanatory text about a service by selecting a\n"
+"specific service. However, if you are not sure whether a service is useful\n"
+"or not, it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services which you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Ahora puede elegir los servicios que desea iniciar durante el arranque.\n"
+"\n"
+"Aquí se presentan todos los servicios disponibles con la instalación\n"
+"corriente. Debe revisarlos con cuidado y quitar la marca de aquellos que no\n"
+"siempre son necesarios al arrancar.\n"
+"\n"
+"Puede obtener un pequeño texto explicativo acerca de un servicio\n"
+"seleccionando un servicio específico. Sin embargo, si no está seguro si un\n"
+"servicio es útil o no, es más seguro dejar el comportamiento\n"
+"predeterminado.\n"
+"\n"
+"!! Tenga mucho cuidado en esta etapa si pretende usar su máquina como un\n"
+"servidor: probablemente no deseará arrancar servicios que no necesita. Por\n"
+"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
+"en un servidor. En general, seleccione sólo aquellos servicios que\n"
+"realmente necesita. !!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if your machine is to be used for programming, choose\n"
+"the desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\": installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server;\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ahora es el momento de especificar los programas que desea instalar en su\n"
+"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y no se\n"
+"supone que los conozca a todos de memoria.\n"
+"\n"
+"Si está realizando una instalación estándar desde un CD-ROM, primero se le\n"
+"pedirá que especifique los CDs que tiene (sólo en modo Experto). Verifique\n"
+"las etiquetas de los CDs y marque las casillas que corresponden a los que\n"
+"tiene disponibles para la instalación. Haga clic sobre \"Aceptar\" cuando\n"
+"este listo para continuar.\n"
+"\n"
+"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
+"su máquina. Los grupos en sí mismos están clasificados en cuatro secciones:\n"
+"\n"
+" * \"Estación de trabajo\": si planea utilizar su máquina como una estación\n"
+"de trabajo, seleccione uno o más grupos correspondientes.\n"
+"\n"
+" * \"Desarrollo\": si la máquina se utilizará para programación, elija\n"
+"el(los) grupo(s) deseado(s).\n"
+"\n"
+" * \"Servidor\": finalmente, si se pretende usar la máquina como un\n"
+"servidor aquí puede seleccionar los servicios más comunes que desea que se\n"
+"instalen en la misma.\n"
+"\n"
+" * \"Entorno gráfico\": seleccione aquí su entorno gráfico preferido. Si\n"
+"desea tener una estación de trabajo gráfica, ¡seleccione al menos uno!\n"
+"\n"
+"Si mueve el cursor del ratón sobre el nombre de un grupo se mostrará un\n"
+"pequeño texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
+"grupos cuando está realizando una instalación regular (es decir, no una\n"
+"actualización), aparecerá un diálogo que propone opciones diferentes para\n"
+"una instalación mínima:\n"
+"\n"
+" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
+"escritorio gráfico que funcione;\n"
+"\n"
+" * \"Con documentación básica\": instala el sistema base más algunos\n"
+"utilitarios básicos y la documentación de los mismos. Esta instalación es\n"
+"adecuada para configurar un servidor;\n"
+"\n"
+" * \"Instalación realmente mínima\": instalará el mínimo necesario estricto\n"
+"para obtener un sistema Linux que funciona, sólo en línea de comandos. Esta\n"
+"instalación ocupa alrededor de 65Mb.\n"
+"\n"
+"Puede marcar la opción \"Selección por paquetes individuales\" que es útil\n"
+"si está familiarizado con los paquetes que se ofrecen o si desea tener un\n"
+"control total sobre lo que se instalará.\n"
+"\n"
+"Si inició la instalación en el modo \"Actualización\", puede deseleccionar\n"
+"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es útil\n"
+"para reparar o actualizar un sistema existente."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Please be patient. This operation can take several minutes."
+msgstr ""
+"Por favor, tenga paciencia. Esta operación puede tomar varios minutos."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
+"local time according to the time zone you selected. It is however possible\n"
+"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
+"hardware clock is the same as the system clock. This is useful when the\n"
+"machine is hosting another operating system like Windows.\n"
+"\n"
+"The \"Automatic time synchronization\" option will automatically regulate\n"
+"the clock by connecting to a remote time server on the Internet. In the\n"
+"list that is presented, choose a server located near you. Of course you\n"
+"must have a working Internet connection for this feature to work. It will\n"
+"actually install on your machine a time server which can be optionally used\n"
+"by other machines on your local network."
+msgstr ""
+"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
+"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
+"horario que Usted seleccionó. Sin embargo, es posible desactivar esto\n"
+"quitando la marca de la casilla \"Reloj interno puesto a GMT\" de forma tal\n"
+"que el reloj de hardware es el mismo que el del sistema. Esto es útil\n"
+"cuando la máquina alberga otro sistema operativo como Windows.\n"
+"\n"
+"La opción \"Sincronización automática de hora (usando NTP)\" regulará\n"
+"automáticamente el reloj conectándose a un servidor remoto de la hora en la\n"
+"Internet. Elija un servidor ubicado cerca suyo en la lista que se presenta.\n"
+"Por supuesto debe tener una conexión con la Internet funcionando para que\n"
+"esta característica funcione. La misma instalará en su máquina un servidor\n"
+"de la hora que, opcionalmente, puede ser utilizado por otras máquinas en su\n"
+"red local."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM and will eject the\n"
+"current CD and ask you to insert a different one as required."
+msgstr ""
+"La instalación Mandrake Linux se divide en varios CD-ROMs. DrakX sabe si un\n"
+"paquete seleccionado se encuentra en otro CD y expulsará el CD corriente y\n"
+"le pedirá que inserte uno diferente cuando sea necesario."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"root\" is the system\n"
+"administrator and is the only one authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
+"easy to compromise a system.\n"
+"\n"
+"However, please do not make the password too long or complicated because\n"
+"you must be able to remember it without too much effort.\n"
+"\n"
+"The password will not be displayed on screen as you type it in. Hence, you\n"
+"will have to type the password twice to reduce the chance of a typing\n"
+"error. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will have to be used the first time you connect.\n"
+"\n"
+"In Expert mode, you will be asked if you will be connecting to an\n"
+"authentication server, like NIS or LDAP.\n"
+"\n"
+"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
+"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
+"network administrator.\n"
+"\n"
+"If your computer is not connected to any administrated network, you will\n"
+"want to choose \"Local files\" for authentication."
+msgstr ""
+"Este es el punto de decisión más crucial para la seguridad de su sistema\n"
+"GNU/Linux: tendrá que ingresar la contraseña de \"root\". \"root\" es el\n"
+"administrador del sistema y es el único autorizado a hacer actualizaciones,\n"
+"agregar usuarios, cambiar la configuración general del sistema, etc.\n"
+"Resumiendo, ¡\"root\" puede hacer de todo!. Es por esto que deberá elegir\n"
+"una contraseña que sea difícil de adivinar - DrakX le dirá si la que eligió\n"
+"es demasiado fácil. Como puede ver, puede optar por no ingresar una\n"
+"contraseña, pero le recomendamos encarecidamente que ingrese una, aunque\n"
+"sea sólo por una razón: no piense que debido a que Usted arrancó GNU/Linux,\n"
+"sus otros sistemas operativos están seguros contra los errores. Eso no es\n"
+"cierto debido a que \"root\" puede sobrepasar todas las limitaciones y\n"
+"borrar, sin intención, todos los datos que se encuentran en las particiones\n"
+"accediendo a las mismas sin el cuidado suficiente. Es por esto que es\n"
+"importante que sea difícil convertirse en \"root\".\n"
+"\n"
+"La contraseña debería ser una mezcla de caracteres alfanumericos y tener al\n"
+"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
+"- eso hace que sea muy fácil comprometer a un sistema.\n"
+"\n"
+"Sin embargo, por favor no haga la contraseña muy larga o complicada debido\n"
+"a que Usted debe poder recordarla sin realizar mucho esfuerzo.\n"
+"\n"
+"La contraseña no se mostrará en la pantalla a medida que Usted la teclee.\n"
+"Por lo tanto, tendrá que teclear la contraseña dos veces para reducir la\n"
+"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
+"mismo error de tecleo, tendrá que utilizar esta contraseña \"incorrecta\"\n"
+"la primera vez que se conecte.\n"
+"\n"
+"En modo experto, se le preguntará si se conectará a un servidor de\n"
+"autenticación, por ejemplo NIS o LDAP.\n"
+"\n"
+"Si su red usa el protocolo LDAP (o NIS) para la autenticación, seleccione\n"
+"\"LDAP\" (o \"NIS\") como autenticación. Si no sabe, pregunte al\n"
+"administrador de su red.\n"
+"\n"
+"Si su computadora no está conectada a alguna red administrada, querrá\n"
+"elegir \"Archivos locales\" para la autenticación."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Before continuing, you should read carefully the terms of the license. It\n"
+"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
+"all the terms in it, click on the \"Refuse\" button which will immediately\n"
+"terminate the installation. To continue with the installation, click on the\n"
+"\"Accept\" button."
+msgstr ""
+"Antes de continuar, debería leer cuidadosamente los terminos de la\n"
+"licencia. Los mismos cubren a toda la distribución Mandrake Linux, y si\n"
+"Usted no está de acuerdo con todos los terminos en la misma, haga clic\n"
+"sobre el botón \"Rechazar\". Esto terminará la instalación inmediatamente.\n"
+"Para continuar con la instalación, haga clic sobre el botón \"Aceptar\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installations. If you make any changes, you must at least define a root\n"
+"partition (\"/\"). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for \"/home\"\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Arriba se listan las particiones Linux existentes que se detectaron en su\n"
+"disco rígido. Puede mantener las elecciones hechas por el asistente, las\n"
+"mismas son buenas para las instalaciones más comunes. Si hace cambios, al\n"
+"menos debe definir una partición raíz (\"/\"). No elija una partición muy\n"
+"pequeña o no podrá instalar software suficiente. Si desea almacenar sus\n"
+"datos en una partición separada, tambien puede necesitar crear una\n"
+"partición para \"/home\" (sólo es posible si tiene más de una partición\n"
+"Linux disponible).\n"
+"\n"
+"Cada partición se lista como sigue: \"Nombre\", \"Capacidad\".\n"
+"\n"
+"\"Nombre\" está estructurado: \"tipo de disco rígido\", \"número de disco\n"
+"rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco rígido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco rígido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Click on \"OK\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Haga clic sobre \"Aceptar\" si desea borrar todos los datos y particiones\n"
+"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
+"\"Aceptar\", no podrá recuperar los datos y las particiones presentes en\n"
+"esta unidad de disco, incluyendo los datos de Windows.\n"
+"\n"
+"Haga clic sobre \"Cancelar\" para cancelar esta operación sin perder los\n"
+"datos y las particiones presentes en esta unidad de disco."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
+"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
+"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
+"should come back to this step for help in at least two situations:\n"
+"\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
+"of your main disk (unless you are using another boot manager), to allow you\n"
+"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
+"your system). If you need to reinstall Windows, the Microsoft install\n"
+"process will rewrite the boot sector, and then you will not be able to\n"
+"start GNU/Linux!\n"
+"\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
+"contains a fair number of system tools for restoring a system, which has\n"
+"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
+"password, or any other reason.\n"
+"\n"
+"When you click on this step, you will be asked to enter a disk inside the\n"
+"drive. The floppy disk you will insert must be empty or contain data which\n"
+"you do not need. You will not have to format it since DrakX will rewrite\n"
+"the whole disk."
+msgstr ""
+"El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
+"puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
+">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Pero en\n"
+"caso que su computadora no pueda arrancar desde el CD-ROM, Usted debería\n"
+"recurrir a este paso al menos en dos situaciones:\n"
+"\n"
+" * cuando instala el cargador de arranque, DrakX sobreescribirá el sector\n"
+"de arranque (MBR) de su disco principal (a menos que este utilizando otro\n"
+"administrador de arranque) de forma tal que pueda iniciar o bien Windows o\n"
+"bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
+"volver a instalar Windows, el proceso de instalación de Microsoft\n"
+"sobreescribirá el sector de arranque, y entonces ¡Usted no podrá iniciar\n"
+"GNU/Linux!\n"
+"\n"
+" * si surge un problema y Usted no puede iniciar GNU/Linux desde el disco\n"
+"rígido, este disquete será la única manera de iniciar GNU/Linux. El mismo\n"
+"contiene una buena cantidad de herramientas del sistema para restaurar un\n"
+"sistema que colapsó debido a una falla de energía, un error de tecleo\n"
+"infortunado, un error en una contraseña, o cualquier otro motivo.\n"
+"\n"
+"Cuando haga clic sobre este paso se le pedirá que inserte un disquete\n"
+"dentro de la disquetera. El disquete que insertará debe estar vacío o\n"
+"contener datos que no necesite. No tendrá que formatearlo ya que DrakX\n"
+"sobreescribirá el disquete por completo."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Finally, depending on whether or not you selected individual packages, you\n"
+"will be presented a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right. When your selection is finished, click the \"Install\" button which\n"
+"will then launch the installation process. Depending on the speed of your\n"
+"hardware and the number of packages that need to be installed, it may take\n"
+"a while to complete the process. An estimate of the time it will take to\n"
+"install everything is displayed on the screen, to help you gauge if there\n"
+"is sufficient time to enjoy a cup of coffee.\n"
+"\n"
+"!! If a server package has been selected, either intentionally or because\n"
+"it was part of a whole group, you will be asked to confirm that you really\n"
+"want those servers to be installed. Under Mandrake Linux, any installed\n"
+"servers are started by default at boot time. Even if they are safe and have\n"
+"no known issues at the time the distribution was shipped, it may happen\n"
+"that security holes are discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default. !!\n"
+"\n"
+"The \"Automatic dependencies\" option simply disables the warning dialog\n"
+"which appears whenever the installer automatically selects a package. This\n"
+"occurs because it has determined that it needs to satisfy a dependency with\n"
+"another package in order to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows to load the\n"
+"package list chosen during a previous installation. Clicking on this icon\n"
+"will ask you to insert a floppy disk previously created at the end of\n"
+"another installation. See the second tip of last step on how to create such\n"
+"a floppy."
+msgstr ""
+"Finalmente, dependiendo de si Usted elige seleccionar los paquetes\n"
+"individuales o no, se le presentará un árbol que contiene todos los\n"
+"paquetes clasificados por grupos y sub-grupos. Mientras navega por el\n"
+"árbol, puede seleccionar grupos enteros, sub-grupos, o simplemente\n"
+"paquetes.\n"
+"\n"
+"Tan pronto como selecciona un paquete en el árbol, aparece una descripción\n"
+"del mismo sobre la derecha. Cuando ha finalizado con su selección, haga\n"
+"clic sobre el botón \"Instalar\" que lanzará el proceso de instalación.\n"
+"Dependiendo de la velocidad de su hardware y de la cantidad de paquetes que\n"
+"se deben instalar, el proceso puede tardar un rato en completarse. En la\n"
+"pantalla se muestra una estimación del tiempo necesario para completar la\n"
+"instalación para ayudarlo a considerar si tiene tiempo suficiente par\n"
+"disfrutar una taza de cafe.\n"
+"\n"
+"!! Si ha sido seleccionado un paquete de servidor ya sea intencionalmente o\n"
+"porque era parte de un grupo completo, se le pedirá que confirme que\n"
+"realmente desea que se instalen esos servidores. Bajo Mandrake Linux,\n"
+"cualquier servidor instalado se inicia de manera predeterminada al momento\n"
+"del arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
+"momento en que se publicó la distribución, puede ocurrir que más tarde se\n"
+"descubran vulnerabilidades en la seguridad. En particular, si no sabe que\n"
+"es lo que se supone que hace un servicio o la razón por la cual se está\n"
+"instalando, entonces haga clic sobre \"No\". Si hace clic sobre \"Sí\" se\n"
+"instalarán todos los servicios listados y de manera predeterminada los\n"
+"mismos arrancarán automáticamente. !!\n"
+"\n"
+"La opción \"Dependencias automáticas\" simplemente deshabilita el diálogo\n"
+"de advertencia cuando el instalador selecciona automáticamente un paquete.\n"
+"Esto ocurre porque se determina que es necesario para satisfacer una\n"
+"dependencia con otro paquete para poder completar la instalación\n"
+"satisfactoriamente.\n"
+"\n"
+"El pequeño icono del disquete al final de la lista le permite cargar la\n"
+"lista de paquetes elegida durante una instalación previa. Haga clic sobre\n"
+"este icono y se le pedirá que inserte un disquete creado con anterioridad\n"
+"al final de otra instalación. Vea el segundo consejo del último paso para\n"
+"información sobre como crear dicho disquete."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a filesystem).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"any of it.\n"
+"\n"
+"Click on \"OK\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"Cancel\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
+"for bad blocks on the disk."
+msgstr ""
+"Se debe formatear cualquier partición nueva que ha sido definida para que\n"
+"se pueda utilizar (formatear significa crear un sistema de archivos).\n"
+"\n"
+"Puede desear volver a formatear algunas particiones ya existentes para\n"
+"borrar cualquier dato que pudieran contener. Si así lo desea, por favor\n"
+"seleccione tambien dichas particiones.\n"
+"\n"
+"Por favor note que no es necesario volver a formatear todas las particiones\n"
+"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
+"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
+"volver a formatear particiones que contienen datos que desea preservar\n"
+"(típicamente \"/home\").\n"
+"\n"
+"Tenga sumo cuidado cuando selecciona las particiones. Despues de formatear,\n"
+"se borrarán todos los datos en las particiones seleccionadas y no podrá\n"
+"recuperarlos en absoluto.\n"
+"\n"
+"Haga clic sobre \"Aceptar\" cuando este listo para formatear las\n"
+"particiones.\n"
+"\n"
+"Haga clic sobre \"Cancelar\" si desea elegir otra partición para la\n"
+"instalación de su sistema operativo Mandrake Linux nuevo.\n"
+"\n"
+"Haga clic sobre \"Avanzado\" si desea seleccionar las particiones en las\n"
+"que se buscarán bloques defectuosos en el disco."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"Normally, DrakX selects the right keyboard for you (depending on the\n"
+"language you have chosen) and you won't even see this step. However, you\n"
+"might not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may still want\n"
+"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
+"located in Quebec, you may find yourself in the same situation. In both\n"
+"cases, you will have to go back to this installation step and select an\n"
+"appropriate keyboard from the list.\n"
+"\n"
+"Click on the \"More\" button to be presented with the complete list of\n"
+"supported keyboards."
+msgstr ""
+"Normalmente, DrakX selecciona el teclado adecuado para Usted (dependiendo\n"
+"del idioma que eligió) y Usted ni siquiera verá este paso. Sin embargo,\n"
+"podría no tener un teclado que se corresponde exactamente con su idioma:\n"
+"por ejemplo, si Usted es una persona hispano-parlante que está en Argentina\n"
+"o Mejico, su teclado será un teclado Latinoamericano, pero si está en\n"
+"España será uno Español. En ambos casos, Usted tendrá que volver a este\n"
+"paso de la instalación y elegir un teclado apropiado de la lista.\n"
+"\n"
+"Haga clic sobre el botón \"Más\" para que se le presente la lista completa\n"
+"de los teclados soportados."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of drive\n"
+"(MBR)\"."
+msgstr ""
+"Debe indicar donde desea colocar la información necesaria para arrancar en\n"
+"GNU/Linux.\n"
+"\n"
+"A menos que sepa exactamente lo que está haciendo, elija \"Primer sector\n"
+"del disco (MBR)\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"OK\" to reboot the system. You can start\n"
+"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
+"soon as the computer has booted up again.\n"
+"\n"
+"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"\n"
+" * \"generate auto-install floppy\": to create an installation floppy disk\n"
+"which will automatically perform a whole installation without the help of\n"
+"an operator, similar to the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"Replay\". This is a partially automated installation as the\n"
+"partitioning step (and only this one) remains interactive;\n"
+"\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a great number of similar\n"
+"machines. See the Auto install section on our web site;\n"
+"\n"
+" * \"Save packages selection\"(*): saves the package selection as done\n"
+"previously. Then, when doing another installation, insert the floppy inside\n"
+"the drive and run the installation going to the help screen by pressing on\n"
+"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Aquí tiene. Ahora la instalación está completa y su sistema GNU/Linux está\n"
+"listo para ser utilizado. Simplemente haga clic sobre \"Aceptar\" para\n"
+"volver a arrancar el sistema. Puede iniciar GNU/Linux o Windows, cualquiera\n"
+"que prefiera (si está usando el arranque dual) tan pronto como su máquina\n"
+"haya vuelto a arrancar.\n"
+"\n"
+"El botón \"Avanzadas\" (sólo en modo Experto) le muestra dos botones más\n"
+"para:\n"
+"\n"
+" * \"Generar un disquete de instalación automática\": para crear un\n"
+"disquete de instalación que realizará una instalación completa sin la\n"
+"asistencia de un operador, similar a la instalación que ha configurado\n"
+"recien.\n"
+"\n"
+"   Note que hay dos opciones diferentes disponibles despues de hacer clic\n"
+"sobre el botón:\n"
+"\n"
+"    * \"Reproducir\" . Esta es una instalación parcialmente automatizada ya\n"
+"que la etapa de particionado (y sólo esta etapa) permanece interactiva.\n"
+"\n"
+"    * \"Automatizada\" . Instalación completamente automatizada: el disco\n"
+"rígido se sobreescribe por completo, y se pierden todos los datos.\n"
+"\n"
+"   Esta característica es muy útil cuando se instala una cantidad grande de\n"
+"máquinas similares. Vea la sección Auto install (en ingles) en nuestro\n"
+"sitio web.\n"
+"\n"
+" * \"Guardar selección de paquetes\"(*): guarda la selección de paquetes\n"
+"como se hizo con anterioridad. Luego, cuando haga otra instalación, inserte\n"
+"el disquete en la disquetera y ejecute la instalación yendo a la pantalla\n"
+"de ayuda con [F1], e ingrese >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
+"teclee \"mformat a:\")"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"DrakX now detects any IDE device present in your computer. It will also\n"
+"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection does not always detect a piece of hardware,\n"
+"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
+"if you know that there is a SCSI card installed in your machine. You will\n"
+"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
+"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
+"detected in your machine by selecting \"See hardware info\" and clicking\n"
+"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
+"return to the SCSI interface question.\n"
+"\n"
+"If you have to manually specify your adapter, DrakX will ask if you want to\n"
+"specify options for it. You should allow DrakX to probe the hardware for\n"
+"the card-specific options which the hardware needs to initialize. This\n"
+"usually works well.\n"
+"\n"
+"If DrakX is not able to probe for the options which need to be passed, you\n"
+"will need to provide options to the driver manually. Please review the\n"
+"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
+"Hardware'' section) for hints on retrieving the parameters required from\n"
+"hardware documentation, from the manufacturer's web site (if you have\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
+"Windows on your system)."
+msgstr ""
+"DrakX ahora detecta cualquier dispositivo IDE presente en su computadora.\n"
+"Tambien buscará una o más tarjetas SCSI PCI en su sistema. Si se encuentra\n"
+"una tarjeta SCSI DrakX instalará el controlador apropiado automáticamente.\n"
+"\n"
+"Debido a que la detección de hardware a veces no detectará alguna pieza de\n"
+"hardware DrakX le pedirá que confirme si tiene una tarjeta SCSI PCI. Haga\n"
+"clic sobre \"Sí\" si sabe que hay una tarjeta SCSI instalada en su máquina.\n"
+"Se le presentará una lista de tarjetas SCSI de la cual elegir. Haga clic\n"
+"sobre \"No\" si no tiene hardware SCSI. Si no está seguro puede verificar\n"
+"la lista de hardware detectado en su máquina seleccionando \"Ver\n"
+"información sobre el hardware\" y haciendo clic sobre \"Aceptar\". Examine\n"
+"la lista de hardware y luego haga clic sobre el botón \"Aceptar\" para\n"
+"volver a la pregunta sobre la interfaz SCSI.\n"
+"\n"
+"Si tiene que seleccionar su adaptador manualmente, DrakX le preguntará si\n"
+"desea especificar opciones para el mismo. Debería permitir que DrakX sondee\n"
+"el hardware buscando las opciones específicas que necesita el hardware para\n"
+"inicializarse. Por lo general esto funciona bien.\n"
+"\n"
+"Si DrakX no puede sondear las opciones que deben pasarse, necesitará\n"
+"proporcionar manualmente las opciones al controlador. Por favor revise la\n"
+"\"Guía del Usuario\" (capítulo 3, sección \"Recopilando información acerca\n"
+"de su hardware\") en busca de consejos para recopilar los parámetros\n"
+"necesarios a partir de la documentación del hardware, desde el sitio web\n"
+"del fabricante (si tiene acceso a la Internet) o desde Microsoft Windows\n"
+"(si utilizaba este hardware con Windows en su sistema)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension;\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation;\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used;\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"Here, you can override this option;\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support;\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
+"selections."
+msgstr ""
+"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
+"operativos, núcleos alternativos, o para una imagen de arranque de\n"
+"emergencia.\n"
+"\n"
+"Para otros sistemas operativos, la entrada consiste sólo de una etiqueta y\n"
+"la partición raíz.\n"
+"\n"
+"Para Linux, hay algunas opciones posibles:\n"
+"\n"
+" * Etiqueta: esta es simplemente el nombre que deberá teclear en el prompt\n"
+"de yaboot para seleccionar esta opción de arranque.\n"
+"\n"
+" * Imagen: esta debería ser el nombre del núcleo a arrancar. Típicamente,\n"
+"vmlinux o una variación de vmlinux con una extensión.\n"
+"\n"
+" * Raíz: el dispositivo \"root\" o \"/\" para su instalación Linux.\n"
+"\n"
+" * Añadir: la opción de añadir al núcleo se usa bastante sobre el hardware\n"
+"Apple para asistir en la inicialización del hardware de vídeo, o para\n"
+"habilitar la emulación de los botones del ratón con el teclado para los\n"
+"botones 2do y 3ro del ratón que por lo general no tienen los ratones\n"
+"estándar de Apple. Algunos ejemplos son los siguientes:\n"
+"\n"
+"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: esta opción se puede usar o bien para cargar los módulos\n"
+"iniciales, antes que este disponible el dispositivo de arranque, o bien\n"
+"cargar una imagen de ramdisk para una situación de arranque de emergencia.\n"
+"\n"
+" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
+"bytes. Puede usar esta opción si necesita asignar un ramdisk mayor.\n"
+"\n"
+" * Lectura-Escritura: normalmente la partición \"root\" se levanta en modo\n"
+"de sólo lectura, para permitir una verificación del sistema de archivos\n"
+"antes que el sistema se levante por completo. Aquí puede cambiar esta\n"
+"opción.\n"
+"\n"
+" * NoVideo: en caso que el hardware de vídeo de Apple sea excepcionalmente\n"
+"problemático, puede seleccionar esta opción para arrancar en el modo\n"
+"\"novideo\", con soporte nativo para el frame-buffer.\n"
+"\n"
+" * Predeterminada: selecciona a esta entrada como la opción Linux por\n"
+"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
+"de Yaboot. Esta entrada tambien se marcará con un \"*\", si presiona [Tab]\n"
+"para ver las selecciones del arranque."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive;\n"
+"\n"
+" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
+"and swap partitions in free space of your hard drive;\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
+"\n"
+"    * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk;\n"
+"\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
+"\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
+"\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning;\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes;\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
+"\n"
+" * \"Done\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the ext2fs chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Ahora necesita elegir que particiones se utilizarán para la instalación de\n"
+"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
+"por una instalación previa de GNU/Linux o con otra herramienta de\n"
+"particionado, puede utilizarlas. En caso contrario se deben definir\n"
+"particiones en el disco rígido.\n"
+"\n"
+"Para crear particiones, primero debe seleccionar un disco rígido. Puede\n"
+"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
+"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
+"SCSI y así sucesivamente.\n"
+"\n"
+"Para particionar el disco rígido seleccionado, puede utilizar estas\n"
+"opciones:\n"
+"\n"
+" * \"Borrar todo\": esta opción borra todas las particiones sobre el disco\n"
+"seleccionado.\n"
+"\n"
+" * \"Asignación automática\": esta opción le permite crear particiones\n"
+"\"Ext2\" y swap automáticamente en el espacio libre de su disco rígido.\n"
+"\n"
+" * \"Rescatar tabla de particiones\": si su tabla de particiones está\n"
+"dañada, puede intentar recuperarla usando esta opción. Por favor, tenga\n"
+"cuidado y recuerde que puede fallar.\n"
+"\n"
+" * \"Más\": le da acceso a características adicionales:\n"
+"\n"
+"    * \"Guardar tabla de particiones\": guarda la tabla de particiones en\n"
+"un disquete. Útil para recuperar la tabla de particiones más adelante en\n"
+"caso que sea necesario. Es altamente recomendable realizar este paso.\n"
+"\n"
+"    * \"Recuperar tabla de particiones\": esta opción le permitirá\n"
+"restaurar una tabla de particiones guardada previamente en un disquete.\n"
+"\n"
+"    * \"Rescatar tabla de particiones\": si su tabla de particiones está\n"
+"dañada puede intentar recuperarla utilizando esta opción. Por favor, tenga\n"
+"cuidado y recuerde que puede fallar.\n"
+"\n"
+"    * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
+"particiones inicial.\n"
+"\n"
+"    * \"Montaje automático de soportes removibles\": si desmarca esta\n"
+"opción los usuarios estarán forzados a montar y desmontar manualmente los\n"
+"soportes removibles como los disquetes y los CD-ROMs.\n"
+"\n"
+" * \"Asistente\": use esta opción si desea utilizar un asistente para\n"
+"particionar su disco rígido. Se recomienda esto si no tiene un buen\n"
+"conocimiento del particionado.\n"
+"\n"
+" * \"Deshacer\": use esta opción para cancelar sus cambios.\n"
+"\n"
+" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
+"sobre las particiones (tipo, opciones, formatear) y brinda más información.\n"
+"\n"
+" * \"Hecho\": cuando ha terminado de particionar su disco rígido, esto\n"
+"guardará sus cambios en el disco.\n"
+"\n"
+"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
+"traves de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
+"\n"
+"Cuando se selecciona una partición, puede utilizar:\n"
+"\n"
+" * Ctrl-c para crear una partición nueva (cuando está seleccionada una\n"
+"partición vacía);\n"
+"\n"
+" * Ctrl-d para borrar una partición;\n"
+"\n"
+" * Ctrl-m para configurar el punto de montaje.\n"
+"\n"
+"Para obtener información sobre los distintos tipos de sistemas de archivos\n"
+"disponibles, por favor lea el capítulo acerca de ext2fs del \"Manual de\n"
+"Referencia\".\n"
+"\n"
+"Si está instalando en una máquina PPC, querrá crear una pequeña partición\n"
+"HFS de \"bootstrap\" de al menos 1MB que será utilizada por el cargador de\n"
+"arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n"
+"50 MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n"
+"alternativos para arrancar en situaciones de emergencia."
+
diff --git a/perl-install/share/po/help-eu.pot b/perl-install/share/po/help-eu.pot
new file mode 100644
index 000000000..df47ab675
--- /dev/null
+++ b/perl-install/share/po/help-eu.pot
@@ -0,0 +1,1846 @@
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+msgstr ""
+"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo\n"
+"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
+"Normalean, beste sistema eragile horiek ongi detektatu eta instalatzen\n"
+"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
+"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
+"\n"
+"Beharbada, ez duzu nahiko beste sistema eragile horietan inor sartzerik.\n"
+"Horrela bada, sistema eragile horien sarrerak ezaba ditzakezu. Baina gero,\n"
+"abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Please choose your preferred language for installation and system usage.\n"
+"\n"
+"Clicking on the \"Advanced\" button will allow you to select other\n"
+"languages to be installed on your workstation. Selecting other languages\n"
+"will install the language-specific files for system documentation and\n"
+"applications. For example, if you will host users from Spain on your\n"
+"machine, select English as the main language in the tree view and in the\n"
+"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"\n"
+"Note that multiple languages may be installed. Once you have selected any\n"
+"additional locales, click the \"OK\" button to continue."
+msgstr ""
+"Aukeratu instalaziorako eta sisteman erabiltzeko nahi duzun hizkuntza.\n"
+"\n"
+"\"Aurreratua\" botoian klik eginez, lan-estazioan instalatzeko beste\n"
+"hizkuntza batzuk hautatu ahal izango dituzu. Beste hizkuntzaren bat\n"
+"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
+"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
+"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
+"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
+"\"Spanish|Spain\"ri dagokion laukian.\n"
+"\n"
+"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Hizkuntza\n"
+"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"At this point, you need to choose where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space, you will\n"
+"need to partition it. Basically, partitioning a hard drive consists of\n"
+"logically dividing it to create space to install your new Mandrake Linux\n"
+"system.\n"
+"\n"
+"Because the partitioning process' effects are usually irreversible,\n"
+"partitioning can be intimidating and stressful if you are an inexperienced\n"
+"user. Fortunately, there is a wizard which simplifies this process. Before\n"
+"beginning, please consult the manual and take your time.\n"
+"\n"
+"If you are running the installation in Expert mode, you will enter\n"
+"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
+"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
+"From the installation interface, you can use the wizards as described here\n"
+"by clicking the dialog's \"Wizard\" button.\n"
+"\n"
+"If partitions have already been defined, either from a previous\n"
+"installation or from another partitioning tool, simply select those to\n"
+"install your Linux system.\n"
+"\n"
+"If partitions are not defined, you will need to create them using the\n"
+"wizard. Depending on your hard drive configuration, several options are\n"
+"available:\n"
+"\n"
+" * \"Use free space\": this option will simply lead to an automatic\n"
+"partitioning of your blank drive(s). You will not be prompted further;\n"
+"\n"
+" * \"Use existing partition\": the wizard has detected one or more existing\n"
+"Linux partitions on your hard drive. If you want to use them, choose this\n"
+"option;\n"
+"\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
+"be performed without the loss of any data, provided you previously\n"
+"defragment the Windows partition. Backing up your data won't hurt either..\n"
+"This solution is recommended if you want to use both Mandrake Linux and\n"
+"Microsoft Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
+"\n"
+" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
+"present on your hard drive and replace them with your new Mandrake Linux\n"
+"system, choose this option. Be careful with this solution because you will\n"
+"not be able to revert your choice after you confirm;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Remove Windows\": this will simply erase everything on the drive and\n"
+"begin fresh, partitioning everything from scratch. All data on your disk\n"
+"will be lost;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Expert mode\": choose this option if you want to manually partition\n"
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
+msgstr ""
+"Hona iritsita, Mandrake Linux sistema eragilea disko gogorrean non\n"
+"instalatu aukeratu beharko duzu. Disko gogorra hutsik badago edo lehendik\n"
+"dagoen sistema eragile batek leku erabilgarri guztia betetzen badu,\n"
+"partizioa egin beharko duzu. Funtsean, disko gogorrean partizioa egitea\n"
+"diskoa logikoki zatitzea da, Mandrake Linux sistema berria instalatzeko\n"
+"lekua sortzeko.\n"
+"\n"
+"Partizio-prozesuaren ondorioak itzulbiderik gabekoak izan ohi direnez,\n"
+"partizioa egitea korapilatsua eta deserosoa izan daiteke esperientziarik\n"
+"gabeko erabiltzailea bazara. Zorionez, badago prozesu hau errazten duen\n"
+"morroi bat. Hasi aurretik, kontsultatu eskuliburua eta hartu behar duzun\n"
+"denbora.\n"
+"\n"
+"Instalazioa Aditu moduan exekutatzen baduzu, DiskDrake, Mandrake Linux-en\n"
+"partizio-tresnan sartuko zara partizioak doitzeko. Ikus DiskDrake atala,\n"
+"``Erabiltzailearen gida''n. Instalazio-interfazean, hemen azaldutako\n"
+"morroiak erabil ditzakezu elkarrizketa-koadroko \"Morroia\" botoian klik\n"
+"eginda.\n"
+"\n"
+"Partizioak jadanik definitu badira, lehendik dagoen instalazio batean nahiz\n"
+"beste partizio-tresna baten bidez, hautatu zure Linux sistema instalatzeko\n"
+"partizioak.\n"
+"\n"
+"Partizioak definitu gabe badaude, morroiaren bidez sortu beharko dituzu.\n"
+"Disko gogorraren konfigurazioaren arabera, hainbat aukera daude:\n"
+"\n"
+" * \"Erabili leku librea\": aukera honek automatikoki egingo ditu\n"
+"partizioak hutsik dagoen unitatean. Ez zaizu beste galderarik egingo;\n"
+"\n"
+" * \"Lehendik dagoen partizioa erabili\": morroiak Linux partizio bat edo\n"
+"gehiago detektatu du zure disko gogorrean. Erabili nahi badituzu, hautatu\n"
+"aukera hau;\n"
+"\n"
+" * \"Erabili Windows-en partizioko leku librea\": Microsoft Windows\n"
+"instalatuta badago disko gogorrean eta bertako leku erabilgarri guztia\n"
+"hartzen badu, Linux-en datuentzat lekua sortu beharko duzu. Horretarako,\n"
+"Microsoft Windows partizioa eta datuak ezaba ditzakezu (ikus ``Ezabatu\n"
+"disko osoa'' edo ``Aditu modua'') edo Microsoft Windows partizioari tamaina\n"
+"aldatu. Tamaina-aldaketa daturik galdu gabe egin daiteke, baldin eta\n"
+"Windows partizioa desfragmentatzen baduzu lehenik. Datuen babeskopia\n"
+"egiteak ere ez du kalterik egingo. Irtenbide hau da gomendagarriena zure\n"
+"ordenagailuan Mandrake Linux eta Microsoft Windows erabili nahi badituzu.\n"
+"\n"
+"   Aukera hau hautatu aurretik, kontuan izan prozedura honen ondoren\n"
+"Microsoft Windows-en partizioa orain baino txikiagoa izango dela. Leku\n"
+"gutxiago izango duzu, beraz, Microsoft Windows-eko datuak gordetzeko edo\n"
+"software berria instalatzeko;\n"
+"\n"
+" * \"Ezabatu disko osoa\": disko gogorreko datu eta partizio guztiak\n"
+"ezabatu eta Mandrake Linux sistema berriarekin ordeztu nahi badituzu,\n"
+"hautatu aukera hau. Kontuz ibili irtenbide honekin, ezin izango baituzu\n"
+"aukeran atzera egin berretsi ondoren;\n"
+"\n"
+"   !! Aukera hau hautatzen baduzu, diskoko datu guztiak galduko dituzu. !!\n"
+"\n"
+" * \"Kendu Windows\": unitatean dagoen guztia ezabatuko du eta berriro\n"
+"hasiko da, hutsetik abiatuta partizioak egiten. Diskoko datu guztiak\n"
+"galduko dira.\n"
+"\n"
+"   !! Aukera hau hautatzen baduzu, diskoko datu guztiak galduko dituzu. !!\n"
+"\n"
+" * \"Aditu modua\": hautatu aukera hau disko gogorreko partizioa eskuz egin\n"
+"nahi baduzu. Kontuz - aukera ahaltsua, baina arriskutsua da. Datu guztiak\n"
+"oso erraz gal ditzakezu. Beraz, ez aukeratu hau baldin eta ez badakizu zer\n"
+"egiten ari zaren."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
+"will try to configure X automatically.\n"
+"\n"
+"It is extremely rare for it to fail, unless the hardware is very old (or\n"
+"very new). If it succeeds, it will start X automatically with the best\n"
+"resolution possible, depending on the size of the monitor. A window will\n"
+"then appear and ask you if you can see it.\n"
+"\n"
+"If you are doing an \"Expert\" installation, you will enter the X\n"
+"configuration wizard. See the corresponding section of the manual for more\n"
+"information about this wizard.\n"
+"\n"
+"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
+"will proceed to the next step. If you cannot see the message, it simply\n"
+"means that the configuration was wrong and the test will automatically end\n"
+"after 10 seconds, restoring the screen."
+msgstr ""
+"X (X Window sistema) GNU/Linux-en interfaze grafikoaren bihotza da, eta\n"
+"Mandrake Linux-en dauden ingurune grafiko guztiak (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etab.) horren araberakoak dira. Atal honetan,Xautomatikoki\n"
+"konfiguratzen saiatuko da DrakX.\n"
+"\n"
+"Oso gutxitan huts egiten du, baldin eta hardwarea ez bada oso zaharra (edo\n"
+"oso berria). Ongi badoa, X automatikoki abiaraziko du ahalik eta\n"
+"bereizmenik onenarekin, monitorearen tamainaren arabera. Orduan leiho bat\n"
+"agertuko da eta ikus dezakezun galdetuko dizu.\n"
+"\n"
+"\"Aditu\" instalazioa egiten ari bazara, X konfiguratzeko morroian sartuko\n"
+"zara. Ikus eskuliburuan dagokion atala morroi honi buruzko informazio\n"
+"gehiago lortzeko.\n"
+"\n"
+"Mezua ikus badezakezu eta \"Bai\" erantzun baduzu, DrakX hurrengo urratsera\n"
+"joango da. Mezua ezin baduzu ikusi, konfigurazioa okerra dela esan nahi du,\n"
+"eta proba automatikoki bukatuko da 10 segundo igarota; pantaila leheneratu\n"
+"egingo da."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Your new Mandrake Linux operating system is currently being installed.\n"
+"Depending on the number of packages you will be installing and the speed of\n"
+"your computer, this operation could take from a few minutes to a\n"
+"significant amount of time.\n"
+"\n"
+"Please be patient."
+msgstr ""
+"Mandrake Linux sistema eragile berria instalatzen ari da orain. Instalatu\n"
+"beharreko paketeen eta ordenagailuaren abiaduraren arabera, eragiketa honek\n"
+"minutu batzuk edo denbora dezente beharko du.\n"
+"\n"
+"Izan pazientzia."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
+"disko gogorra. Kontuz ibili, bertako datu guztiak galduko dira eta ezin\n"
+"izango dira berreskuratu!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"GNU/Linux is a multiuser system, and this means that each user can have his\n"
+"own preferences, his own files and so on. You can read the ``User Guide''\n"
+"to learn more. But unlike \"root\", which is the administrator, the users\n"
+"you will add here will not be entitled to change anything except their own\n"
+"files and their own configuration. You will have to create at least one\n"
+"regular user for yourself. That account is where you should log in for\n"
+"routine use. Although it is very practical to log in as \"root\" everyday,\n"
+"it may also be very dangerous! The slightest mistake could mean that your\n"
+"system would not work any more. If you make a serious mistake as a regular\n"
+"user, you may only lose some information, but not the entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
+"as you can actually enter whatever you want. DrakX will then take the first\n"
+"word you have entered in the box and will bring it over to the \"User\n"
+"name\". This is the name this particular user will use to log onto the\n"
+"system. You can change it. You then have to enter a password here. A\n"
+"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
+"from a security point of view, but that is no reason to neglect it: after\n"
+"all, your files are at risk.\n"
+"\n"
+"If you click on \"Accept user\", you can then add as many as you want. Add\n"
+"a user for each one of your friends: your father or your sister, for\n"
+"example. When you finish adding all the users you want, select \"Done\".\n"
+"\n"
+"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
+"for that user (bash by default)."
+msgstr ""
+"GNU/Linux erabiltzaile anitzeko sistema da, eta horrek esan nahi du\n"
+"erabiltzaile bakoitzak bere hobespenak eta bere fitxategiak eduki\n"
+"ditzakeela. Gehiago jakiteko, irakurri ``Erabiltzailearen gida''. Baina\n"
+"administratzailea den \"root\"-ak ez bezala, hemen gehitutako\n"
+"erabiltzaileek debekatuta izango dute ezer aldatzea euren fitxategiak eta\n"
+"konfigurazioa izan ezik. Zuretzat erabiltzaile arrunt bat behintzat sortu\n"
+"beharko duzu. Eta kontu hori erabili beharko zenuke eguneroko lanak\n"
+"egiteko. Egunero \"root\" gisa saioa hastea oso erosoa den arren, oso\n"
+"arriskutsua ere izan daiteke! Hutsegiterik txikienak sistema funtzionatu\n"
+"ezinda utz dezake. Erabiltzaile arrunt gisa hutsegite larri bat egiten\n"
+"baduzu, informazioren bat gal dezakezu, baina ez sistema osoa.\n"
+"\n"
+"Lehendabizi, zure benetako izena idatzi behar duzu. Hori ez da\n"
+"derrigorrezkoa noski - berez, nahi duzun izena eman baitezakezu. DrakXk\n"
+"gero zuk koadroan idatzitako lehen hitza hartuko du eta hori izango da\n"
+"\"Erabiltzaile-izena\". Hori izango da erabiltzaile jakin horrek sisteman\n"
+"saioa hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
+"behar duzu hemen. Pribilegio gabeko erabiltzailearen (erabiltzaile\n"
+"arruntaren) pasahitza ez da \"root\"-arena bezain funtsezkoa segurtasunaren\n"
+"aldetik, baina ez da horregatik arduragabekeriaz jokatu behar: izan ere,\n"
+"zure fitxategiak baitaude arriskuan.\n"
+"\n"
+"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina erabiltzaile gehi\n"
+"ditzakezu. Gehitu erabiltzaile bat zure lagun bakoitzeko: zure ama edo\n"
+"anaia, esate baterako. Nahi dituzun erabiltzaile guztiak gehitu ondoren,\n"
+"hautatu \"Eginda\".\n"
+"\n"
+"\"Aurreratua\" botoian klik egitean, erabiltzaile horrentzat lehenetsitako\n"
+"\"shell\"-a aldatu ahal izango duzu (bash da lehenetsia)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Finally, you will be asked whether you want to see the graphical interface\n"
+"at boot. Note this question will be asked even if you chose not to test the\n"
+"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
+"act as a server, or if you were not successful in getting the display\n"
+"configured."
+msgstr ""
+"Azkenik, abioan interfaze grafikoa ikusi nahi duzun galdetuko zaizu.\n"
+"Kontuan izan galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
+"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
+"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratzea lortzen ez\n"
+"baduzu."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful to\n"
+"choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt;\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information;\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt;\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot NewWorld MacIntosh hardwarerako abioko kargatzaile bat da.\n"
+"GNU/Linux, MacOS, edo MacOSX abiaraz dezake, ordenagailuan egonez gero.\n"
+"Normalean, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
+"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
+"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
+"\n"
+"Yaboot-en aukera nagusiak hauek dira:\n"
+"\n"
+" * Hasierako mezua: abioko gonbitaren aurretik agertzen den testu-mezu soil\n"
+"bat;\n"
+"\n"
+" * Abioko gailua: GNU/Linux-ekin abiarazteko behar den informazioa non\n"
+"kokatu nahi duzun adierazten du. Normalean, lehenago bootstrap partizio bat\n"
+"konfiguratuko duzu informazio hori edukitzeko.\n"
+"\n"
+" * Open Firmware-ren atzerapena: LILOrekin ez bezala, bi atzerapen daude\n"
+"erabilgarri yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen\n"
+"CD, OF abioa MacOS edo Linux aukera dezakezu;\n"
+"\n"
+" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko\n"
+"atzerapenaren antzekoa da. Linux hautatu ondoren, 0,1 segundoko atzerapena\n"
+"izango duzu lehenetsitako nukleo-deskribapena hautatu aurretik;\n"
+"\n"
+" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, ``C'' aukeratu\n"
+"ahal izango duzu CDarentzat abioko lehen gonbitean;\n"
+"\n"
+" * Gaitu OF abiaraztea?: aukera hau hautatzen baduzu, ``N'' aukeratu ahal\n"
+"izango duzu Open Firmware-rentzat abioko lehen gonbitean;\n"
+"\n"
+" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
+"Firmware Atzerapena igarotzen denean."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"At this point, it is time to choose the security level desired for the\n"
+"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
+"the data stored in it is crucial, the higher the security level should be.\n"
+"However, a higher security level is generally obtained at the expense of\n"
+"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
+"to get more information about the meaning of these levels.\n"
+"\n"
+"If you do not know what to choose, keep the default option."
+msgstr ""
+"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
+"aukeratzeko garaia da. Oro har, makina zenbat eta babesgabeago egon eta\n"
+"zenbat eta funtsezko datu gehiago eduki biltegiratuta, orduan eta\n"
+"segurtasun-maila handiagoa behar da. Bestalde, segurtasun-maila handia,\n"
+"erabiltzeko erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziako\n"
+"eskuliburua''ren \"msec\" atala maila horien esanahiari buruzko informazio\n"
+"gehiago lortzeko.\n"
+"\n"
+"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Hautatu ataka egokia. Adibidez Windows-eko \"COM1\" atakak \"ttyS0\" du\n"
+"izena GNU/Linux-en."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Here are presented various parameters concerning your machine. Depending on\n"
+"your installed hardware, you may - or not, see the following entries:\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary;\n"
+"\n"
+" * \"Keyboard\": check the current keyboard map configuration and click on\n"
+"the button to change that if necessary;\n"
+"\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
+"\n"
+" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"configuration wizard;\n"
+"\n"
+" * \"Sound card\": if a sound card is detected on your system, it is\n"
+"displayed here. No modification possible at installation time;\n"
+"\n"
+" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+"here. No modification possible at installation time;\n"
+"\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+"displayed here. You can click on the button to change the parameters\n"
+"associated with it."
+msgstr ""
+"Hemen zure ordenagailuari dagozkion parametroak aurkezten dira.\n"
+"Instalatutako hardwarearen arabera, ondoko sarrerak ikusiko dituzu - edo\n"
+"ez:\n"
+"\n"
+" * \"Sagua\": egiaztatu uneko sagu-konfigurazioa eta, behar izanez gero,\n"
+"egin klik botoian, aldatzeko;\n"
+"\n"
+" * \"Teklatua\": egiaztatu uneko teklatuaren konfigurazioa eta, behar\n"
+"izanez gero, egin klik botoian aldatzeko;\n"
+"\n"
+" * \"Ordu-zona\": DrakXk, lehenespenez, aukeratutako hizkuntzatik asmatzen\n"
+"du zure ordu-zona. Baina hemen ere, teklatua aukeratzean bezala, baliteke\n"
+"aukeratutako hizkuntzari dagokion herrialdean ez egotea zu. Horregatik,\n"
+"\"Ordu-zona\" botoian klik egin beharko duzu erlojua zu zauden ordu-zonaren\n"
+"arabera konfiguratzeko;\n"
+"\n"
+" * \"Inprimagailua\": \"Inprimagailurik ez\" botoian klik eginez,\n"
+"inprimagailuaren konfigurazio-morroia irekiko da;\n"
+"\n"
+" * \"Soinu-txartela\": zure sisteman soinu-txartel bat detektatzen bada,\n"
+"hemen bistaratuko da. Instalazio-garaian ezin da aldaketarik egin;\n"
+"\n"
+" * \"Telebista-txartela\": zure sisteman telebista-txartel bat detektatzen\n"
+"bada, hemen bistaratuko da. Instalazio-garaian ezin da aldaketarik egin;\n"
+"\n"
+" * \"ISDN txartela\": zure sisteman ISDN txartel bat detektatzen bada,\n"
+"hemen bistaratuko da. Egin klik botoian txartelaren parametroak aldatzeko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
+"installation or if you want to have greater control (\"Expert\"). You can\n"
+"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
+"system:\n"
+"\n"
+" * \"Install\": completely wipes out the old system. In fact, depending on\n"
+"what currently holds your machine, you will be able to keep some old (Linux\n"
+"or other) partitions unchanged;\n"
+"\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
+"\n"
+" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
+"existing Mandrake Linux system while keeping all system configurations\n"
+"unchanged. Adding new packages to the current installation is also\n"
+"possible.\n"
+"\n"
+"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
+"release.\n"
+"\n"
+"Depending on your knowledge of GNU/Linux, select one of the following\n"
+"choices:\n"
+"\n"
+" * Recommended: choose this if you have never installed a GNU/Linux\n"
+"operating system. The installation will be very easy and you will only be\n"
+"asked a few questions;\n"
+"\n"
+" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
+"installation class. The expert installation will allow you to perform a\n"
+"highly-customized installation. Answering some of the questions can be\n"
+"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
+"choose this unless you know what you are doing."
+msgstr ""
+"DrakXk lehenetsitako instalazioa (\"Gomendatua\") egin nahi duzun edo\n"
+"kontrol handiagoa eduki nahi duzun (\"Aditua\") jakin behar du orain.\n"
+"Gainera, instalazio berri bat egin dezakezu edo lehendik dagoen Mandrake\n"
+"Linux sistema eguneratu dezakezu.\n"
+"\n"
+" * \"Instalatu\": sistema zaharra erabat garbituko da. Makinan daukazunaren\n"
+"arabera, partizio zahar batzuk (Linux-enak edo beste batzuenak) aldatu gabe\n"
+"mantendu ahal izango dituzu.\n"
+"\n"
+" * \"Bertsio-berritu\": instalazio-klase honekin lehendik Mandrake Linux\n"
+"sisteman instalatuta dauzkazun paketeak eguneratuko dira, besterik gabe.\n"
+"Disko gogorretako partizioak eta erabiltzaileen konfigurazioak mantenduko\n"
+"ditu. Gainerako konfigurazio-urratsak erabilgarri egongo dira instalazio\n"
+"arrunterako;\n"
+"\n"
+" * \"Paketeak bakarrik bertsio-berritu\": klase berri honekin lehendik\n"
+"daukazun Mandrake Linux sistema bertsio-berrituko duzu\n"
+"sistema-konfigurazioa batere aldatu gabe. Uneko instalazioan pakete berriak\n"
+"ere gehitu ahal izango dituzu.\n"
+"\n"
+"Bertsio-berritzeek ongi funtzionatuko dute \"8.1\" bertsiotik aurrerako\n"
+"Mandrake Linux sistemetan.\n"
+"\n"
+"GNU/Linux zenbateraino ezagutzen duzun kontuan hartuta, hautatu aukera\n"
+"hauetako bat:\n"
+"\n"
+" * Gomendatua: aukeratu hau GNU/Linuxsistema eragilea inoiz instalatu ez\n"
+"baduzu. Instalazioa oso erraza izango da eta galdera batzuk besterik ez\n"
+"zaizkizu egingo;\n"
+"\n"
+" * Aditua GNU/Linux ongi ezagutzen baduzu, instalazio-klase hau aukera\n"
+"dezakezu. Instalazio adituak oso instalazio pertsonalizatua egiteko aukera\n"
+"emango dizu. Galdera batzuei erantzutea zaila izan daiteke GNU/Linux ongi\n"
+"ezagutzen ez baduzu, beraz ez ezazu aukeratu baldin eta zer egiten ari\n"
+"zaren ez badakizu."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Some bugs may have\n"
+"been fixed, and security issues solved. To allow you to benefit from these\n"
+"updates, you are now proposed to download them from the Internet. Choose\n"
+"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
+"to install updated packages later.\n"
+"\n"
+"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"retrieved. Choose the one nearest you. Then a package-selection tree\n"
+"appears: review the selection, and press \"Install\" to retrieve and\n"
+"install the selected package(s), or \"Cancel\" to abort."
+msgstr ""
+"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
+"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren,\n"
+"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
+"zaitezen, Internetik deskargatzea gomendatzen dizugu. Aukeratu \"Bai\"\n"
+"Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete eguneratuak\n"
+"geroago instalatu nahi badituzu.\n"
+"\n"
+"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen zerrenda\n"
+"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko\n"
+"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\"\n"
+"hautatutako paketeak hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
+"accordingly, depending on what it finds here:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
+"OS;\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If in doubt, DrakX will display a dialog with various options.\n"
+"\n"
+" * \"Bootloader to use\": you have three choices:\n"
+"\n"
+"    * \"GRUB\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
+"interface.\n"
+"\n"
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
+"interface.\n"
+"\n"
+" * \"Boot device\": in most cases, you will not change the default\n"
+"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
+"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"\n"
+" * \"Delay before booting the default image\": when rebooting the computer,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"another boot entry than the default one.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
+"Linux system! Also, be sure you know what you do before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
+"options, which are reserved to the expert user.\n"
+"\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options which will be available at boot time will be displayed.\n"
+"\n"
+"If there is another operating system installed on your machine, it will\n"
+"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
+"the existing options. Select an entry and click \"Modify\" to modify or\n"
+"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"installation step."
+msgstr ""
+"LILO eta grub abioko kargatzaileak dira. Etapa hau erabat automatizatuta\n"
+"izaten da normalean. Izan ere, DrakXk diskoaren abioko sektorea aztertzen\n"
+"du eta bertan aurkitzen duenaren arabera jokatzen du:\n"
+"\n"
+" * Windows-en abioko sektore bat aurkitzen badu, grub abioko sektorearekin\n"
+"ordeztuko du. Horrela, GNU/Linux edo beste SE bat kargatu ahal izango duzu;\n"
+"\n"
+" * grub edo LILO abioko sektore bat aurkitzen badu, berri batekin ordeztuko\n"
+"du.\n"
+"\n"
+"Zalantzarik izanez gero, DrakXk hainbat aukera proposatuko ditu.\n"
+"\n"
+" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
+"\n"
+"    * \"GRUB\": grub nahiago baduzu (testu-menua).\n"
+"\n"
+"    * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin\n"
+"nahiago baduzu.\n"
+"\n"
+"    * \"LILO testu-menuarekin\": LILOen testu-menuaren interfazea nahiago\n"
+"baduzu.\n"
+"\n"
+" * \"Abioko gailua\": gehienetan, ez duzu disko lehenetsia (\"/dev/hda\")\n"
+"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren disko\n"
+"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\") ere instala\n"
+"daiteke;\n"
+"\n"
+" * \"Imajina lehenetsia abiarazi arteko atzerapena\": ordenagailua\n"
+"berrabiaraztean, hau da erabiltzaileari ematen zaion denbora, abioko\n"
+"kargatzailearen menuan lehenetsia ez den abioko sarrera bat aukeratzeko.\n"
+"\n"
+"!! Kontuan izan abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
+"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bideren bat\n"
+"beharko duzula! Halaber, edozein aukera aldatu aurretik, ziurtatu\n"
+"badakizula zer egiten duzun. !!\n"
+"\n"
+"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
+"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
+"\n"
+"Abioko kargatzailearen parametro orokorrak konfiguratutakoan, abioan\n"
+"erabilgarri egongo diren aukeren zerrenda bistaratuko da.\n"
+"\n"
+"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
+"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak gehiago\n"
+"zehaztea hauta dezakezu. Hautatu sarrera bat eta egin klik \"Aldatu\"n\n"
+"aldaketak egiteko edo kentzeko; \"Gehitu\"k sarrera berria sortzen du eta\n"
+"\"Eginda\" hautatuz gero instalazioaren hurrengo urratsera joaten da."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Microsoft partizio bat baino gehiago detektatu da zure disko gogorrean.\n"
+"Aukeratu Mandrake Linux sistema eragile berria instalatzeko tamainaz aldatu\n"
+"nahi duzuna.\n"
+"\n"
+"Partizio bakoitza honela zerrendatzen da: \"Linux izena\", \"Windows\n"
+"izena\" \"Edukiera\".\n"
+"\n"
+"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
+"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
+"\n"
+"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
+"bada, eta \"sd\", SCSI unitatea bada.\n"
+"\n"
+"\"Disko gogorraren zenbakia\" beti \\"hd\\" edo \\"sd\\"ren ondoko letra\n"
+"bat izaten da. IDE disko gogorretan:\n"
+"\n"
+" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
+"\n"
+" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
+"letrak \"bigarren SCSI ID baxuena\", etab.\n"
+"\n"
+"\"Windows izena\" Windows-en disko gogorraren letra da (lehen diskoak edo\n"
+"partizioak \"C:\" du izena)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Here, we select a printing system for your computer. Other OSs may offer\n"
+"you one, but Mandrake Linux offers three.\n"
+"\n"
+" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+"a direct connection to your printer and you want to be able to panic out of\n"
+"printer jams, and you do not have networked printers. It will handle only\n"
+"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
+"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
+"after installation by running PrinterDrake from the Mandrake Control Center\n"
+"and clicking the expert button.\n"
+"\n"
+" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+"your local printer and also halfway-around the planet. It is simple and can\n"
+"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
+"it is compatible with the systems that went before. It can do many tricks,\n"
+"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
+"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
+"graphical front-ends for printing or choosing printer options.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
+"approximately the same things the others can do, but it will print to\n"
+"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
+"and it can print directly to shell commands. If you have need of Novell or\n"
+"printing to commands without using a separate pipe construct, use lprNG.\n"
+"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
+"networks."
+msgstr ""
+"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste SE\n"
+"batzuek bakarra eskainiko dute beharbada, baina Mandrake Linux-ek hiru\n"
+"eskaintzen ditu.\n"
+"\n"
+" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, ``inprimatu, ez\n"
+"egon ilaran''. Aukera egokia da inprimagailua zuzenean konektatuta baduzu,\n"
+"papera trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez\n"
+"baduzu. Sareko oso kasu sinpleak maneiatuko ditu eta mantso samarra da\n"
+"sarerako. Aukeratu \"pdq\" GNU/Linux-eko zure lehen bidaia bada.\n"
+"Instalazioa egin ondoren aukerak aldatu nahi badituzu, exekutatu\n"
+"Mandrake-ren kontrol-zentroko PrinterDrake eta egin klik adituaren botoian.\n"
+"\n"
+" * \"CUPS\" - ``Common Unix Printing System'' oso ona da zure inprimagailu\n"
+"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta\n"
+"\"lpd\" inprimatze-sistema zaharretako bezero nahiz zerbitzari gisa jardun\n"
+"dezake. Lehengo sistemekin bateragarria da, beraz. Gauza asko egin ditzake,\n"
+"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari\n"
+"bat emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu.\n"
+"Inprimagailuaren aukerak hautatzeko edo inprimatzeko interfaze grafikoak\n"
+"ditu.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. Sistema honek\n"
+"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
+"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen\n"
+"duelako, eta shell komandoetan zuzenean inprima dezakeelako. Novell behar\n"
+"baduzu edo kanalizaziorik erabili gabe komandoetan inprimatu behar baduzu,\n"
+"erabili lprNG. Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta\n"
+"hobea delako."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"The first time you try the X configuration, you may not be very satisfied\n"
+"with its display (screen is too small, shifted left or right...). Hence,\n"
+"even if X starts up correctly, DrakX then asks you if the configuration\n"
+"suits you. It will also propose to change it by displaying a list of valid\n"
+"modes it could find, asking you to select one.\n"
+"\n"
+"As a last resort, if you still cannot get X to work, choose \"Change\n"
+"graphics card\", select \"Unlisted card\", and when prompted on which\n"
+"server, choose \"FBDev\". This is a failsafe option which works with any\n"
+"modern graphics card. Then choose \"Test again\" to be sure."
+msgstr ""
+"X konfigurazioa probatzen duzun lehen aldian, baliteke oso pozik ez\n"
+"geratzea ikusten denarekin (pantaila txikiegia, ezkerrera edo eskuinera\n"
+"lerratua...). Beraz, X ongi abiarazten bada ere, konfigurazioa zuretzat\n"
+"egokia den galdetuko dizu DrakXk gero. Aldatzea ere proposatuko dizu aurki\n"
+"ditzakeen baliozko moduen zerrenda bistaratuz eta bat hautatzeko eskatuz.\n"
+"\n"
+"Azken baliabide gisa, Xk funtzionatzea lortzen ez baduzu, aukeratu \"Aldatu\n"
+"txartel grafikoa\", hautatu \"Zerrendatu gabeko txartela\", eta zein\n"
+"zerbitzari nahi duzun galdetzean, aukeratu \"FBDev\". Hau aukera segurua\n"
+"da, edozein txartel grafiko modernorekin funtzionatzen duena. Gero aukeratu\n"
+"\"Probatu berriro\" ziur egoteko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"DrakX generally detects the number of buttons your mouse has. If not, it\n"
+"assumes you have a two-button mouse and will set it up for third-button\n"
+"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
+"USB mouse.\n"
+"\n"
+"If you wish to specify a different type of mouse select the appropriate\n"
+"type from the provided list.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct. If the mouse is not working well, press the space bar or [Return]\n"
+"to \"Cancel\" and choose again."
+msgstr ""
+"DrakXk normalean detektatzen du saguak zenbat botoi dituen. Detektatu ezin\n"
+"badu, bi botoiko sagua duzula suposatuko du, eta hirugarren botoia emula\n"
+"dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua PS/2, seriekoa\n"
+"edo USB motakoa den.\n"
+"\n"
+"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
+"zerrendan.\n"
+"\n"
+"Lehenetsitakoa ez den sagu aukeratzen baduzu, probako pantaila bat azalduko\n"
+"da. Erabili botoiak eta gurpila ezarpenak egokiak direla egiaztatzeko.\n"
+"Saguak ez badu behar bezala funtzionatzen, sakatu zuriune-barra edo\n"
+"[Itzuli], bertan behera \"Utzi\" eta berriro aukeratzeko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"You are now proposed to set up your Internet/network connection. If you\n"
+"wish to connect your computer to the Internet or to a local network, click\n"
+"\"OK\". The autodetection of network devices and modem will be launched. If\n"
+"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
+"may also choose not to configure the network, or do it later; in that case,\n"
+"simply click the \"Cancel\" button.\n"
+"\n"
+"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"Here, we will not detail each configuration. Simply make sure that you have\n"
+"all the parameters from your Internet Service Provider or system\n"
+"administrator.\n"
+"\n"
+"You can consult the ``User Guide'' chapter about Internet connections for\n"
+"details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection.\n"
+"\n"
+"If you wish to configure the network later after installation, or if you\n"
+"are finished configuring your network connection, click \"Cancel\"."
+msgstr ""
+"Interneteko/sareko konexioa konfiguratzea proposatzen dizugu orain. Zure\n"
+"ordenagailua Internetera edo sare lokal batera konektatu nahi baduzu, egin\n"
+"klik \"Ados\" botoian. Sareko gailuak eta modemak automatikoki detektatzeko\n"
+"prozesua abiaraziko da. Detekzioak huts egiten badu, desautatu \"Erabili\n"
+"auto-detekzioa\" hurrengoan. Sarea ez konfiguratzea edo geroago\n"
+"konfiguratzea ere aukera dezakezu; horrela bada, egin klik \"Utzi\"\n"
+"botoian.\n"
+"\n"
+"Konexio erabilgarriak: modem tradizionala, ISDN modema, ADSL konexioa,\n"
+"kable bidezko modema, eta azkenik sare lokaleko konexioa (Ethernet).\n"
+"\n"
+"Hemen ez dugu konfigurazio bakoitza zehaztuko. Ziurtatu Interneteko\n"
+"zerbitzu-hornitzaileak edo sistema-administratzaileak eman dizkizula\n"
+"parametro guztiak.\n"
+"\n"
+"``Erabiltzailearen gida''n Interneteko konexioei buruzko kapitulua\n"
+"kontsulta dezakezu konfigurazioaren xehetasunak ezagutzeko, edo bestela,\n"
+"itxaron sistema instalatu arte, eta erabili zure konexioa konfiguratzeko\n"
+"bertan azaltzen zaizun programa.\n"
+"\n"
+"Sarea geroago, instalazioa egin ondoren, konfiguratu nahi baduzu, edo\n"
+"sare-konexioa konfiguratzen bukatu baduzu, sakatu \"Utzi\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"You may now choose which services you wish to start at boot time.\n"
+"\n"
+"Here are presented all the services available with the current\n"
+"installation. Review them carefully and uncheck those which are not always\n"
+"needed at boot time.\n"
+"\n"
+"You can get a short explanatory text about a service by selecting a\n"
+"specific service. However, if you are not sure whether a service is useful\n"
+"or not, it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services which you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Orain abioan zein zerbitzu abiaraztea nahi duzun aukera dezakezu.\n"
+"\n"
+"Hemen uneko instalazioan erabilgarri dauden zerbitzu guztiak ageri dira.\n"
+"Azter itzazu arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
+"direnei.\n"
+"\n"
+"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
+"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
+"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
+"\n"
+"!! Etapa honetan, oso kontuz ibili zure makina zerbitzari gisa erabiltzeko\n"
+"asmoa baduzu: seguru asko ez duzu behar ez duzun zerbitzurik abiarazi nahi\n"
+"izango. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
+"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
+"soilik hautatu. !!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if your machine is to be used for programming, choose\n"
+"the desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\": installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server;\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
+"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
+"jakin beharrik.\n"
+"\n"
+"CD-ROMetik instalazio estandarra egiten ari bazara, lehendabizi orain\n"
+"dituzun CDak zehazteko eskatuko zaizu (Aditu moduan soilik). Begiratu CDen\n"
+"etiketei eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
+"laukiak. Jarraitzeko prest zaudenean, egin klik \"Ados\" botoian.\n"
+"\n"
+"Paketeak taldeka antolatuta daude, ordenagailuaren erabilera zehatzen\n"
+"arabera. Taldeak lau ataletan sailkatzen dira:\n"
+"\n"
+" * \"Laneko estazioa\": makina lan-estazio gisa erabiltzeko asmoa baduzu,\n"
+"hautatu hauetako talde bat edo gehiago;\n"
+"\n"
+" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
+"nahi dituzun taldeak;\n"
+"\n"
+" * \"Zerbitzaria\": makina zerbitzari moduan erabili nahi baduzu, hemen\n"
+"hauta ditzakezu instalatu nahi dituzun zerbitzu ohikoenak;\n"
+"\n"
+" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
+"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
+"eduki nahi baduzu!\n"
+"\n"
+"Saguaren kurtsorea talde-izen baten gainera eramanez, talde horri buruzko\n"
+"azalpen-testu labur bat bistaratuko da. Instalazio arrunta egitean (hau da,\n"
+"bertsio-berritzea ez denean) talde guztiak desautatzen badituzu,\n"
+"elkarrizketa-koadro bat agertuko da instalazio minimoa egiteko aukerak\n"
+"proposatuz:\n"
+"\n"
+" * \"Xrekin\": ahalik eta pakete gutxien instalatu, mahaigain grafikoa\n"
+"edukitzeko behar direnak bakarrik;\n"
+"\n"
+" * \"Oinarrizko dokumentazioarekin\": oinarrizko sistema eta oinarrizko\n"
+"utilitateak eta horien dokumentazioa instalatzen du. Instalazio hau egokia\n"
+"da zerbitzaria konfiguratzeko;\n"
+"\n"
+" * \"Instalazio minimo-minimoa\": Linux sistema eragileak\n"
+"komando-lerroarekin soilik funtziona dezan bene-benetan beharrezkoa dena\n"
+"bakarrik instalatzen du. Instalazio honek 65 Mb inguru hartzen ditu.\n"
+"\n"
+"\"Pakete indibidualen hautapena\" laukia hauta dezakezu; oso erabilgarria\n"
+"izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo instalatuko\n"
+"den guztia erabat kontrolatu nahi baduzu.\n"
+"\n"
+"Instalazioa \"Bertsio-berritze\" moduan hasi baduzu, talde guztiak desauta\n"
+"ditzakezu beste paketerik instala ez dadin. Erabilgarria da lehendik dagoen\n"
+"sistema bat konpontzeko edo eguneratzeko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Please be patient. This operation can take several minutes."
+msgstr ""
+"Izan pazientzia. Eragiketa honek minutu batzuk beharko ditu."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
+"local time according to the time zone you selected. It is however possible\n"
+"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
+"hardware clock is the same as the system clock. This is useful when the\n"
+"machine is hosting another operating system like Windows.\n"
+"\n"
+"The \"Automatic time synchronization\" option will automatically regulate\n"
+"the clock by connecting to a remote time server on the Internet. In the\n"
+"list that is presented, choose a server located near you. Of course you\n"
+"must have a working Internet connection for this feature to work. It will\n"
+"actually install on your machine a time server which can be optionally used\n"
+"by other machines on your local network."
+msgstr ""
+"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
+"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
+"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\", hardwarearen\n"
+"ordua eta sistemaren ordua berdinak izan daitezen. Erosoa da makinan beste\n"
+"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
+"\n"
+"\"Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du erlojua\n"
+"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
+"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko\n"
+"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
+"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili\n"
+"ahal izango duzu, nahi izanez gero."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM and will eject the\n"
+"current CD and ask you to insert a different one as required."
+msgstr ""
+"Mandrake Linux instalazioa hainbat CD-ROMetan banatuta dago. DrakXk badaki\n"
+"hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta uneko\n"
+"CDa atera eta beste bat sartzeko eskatuko dizu behar izan ahala."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"root\" is the system\n"
+"administrator and is the only one authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
+"easy to compromise a system.\n"
+"\n"
+"However, please do not make the password too long or complicated because\n"
+"you must be able to remember it without too much effort.\n"
+"\n"
+"The password will not be displayed on screen as you type it in. Hence, you\n"
+"will have to type the password twice to reduce the chance of a typing\n"
+"error. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will have to be used the first time you connect.\n"
+"\n"
+"In Expert mode, you will be asked if you will be connecting to an\n"
+"authentication server, like NIS or LDAP.\n"
+"\n"
+"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
+"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
+"network administrator.\n"
+"\n"
+"If your computer is not connected to any administrated network, you will\n"
+"want to choose \"Local files\" for authentication."
+msgstr ""
+"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren segurtasunerako:\n"
+"\"root\"-aren pasahitza adierazi behar duzu. \"root\"\n"
+"sistema-administratzailea da eta berak bakarrik dauka sistema eguneratzeko,\n"
+"erabiltzaileak gehitzeko, konfigurazio orokorra aldatzeko eta abar egiteko\n"
+"baimena. Labur esanda, \"root\"-ak edozer egin dezake! Horregatik, asmatzen\n"
+"zaila den pasahitza aukeratu behar duzu - errazegia bada, DrakXk abisatuko\n"
+"dizu. Ikus dezakezunez, pasahitzik ez sartzea aukera dezakezu, baina\n"
+"horrelakorik ez egiteko aholkua ematen dizugu, arrazoi batengatik: ez\n"
+"pentsa GNU/Linux-ekin abiarazi duzulako zure beste sistema eragileek\n"
+"akatsik eduki ezin dutenik. \"root\"-ak muga guztiak gaindi ditzakeenez,\n"
+"eta partizioetan arduragabeki sartuz partizioetako datu guztiak nahi gabe\n"
+"ezaba ditzakeenez, garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
+"\n"
+"Pasahitzak gutxienez 8 karaktere izatea komeni da, letrak eta zenbakiak\n"
+"nahasian. Ez inoiz idatzi \"root\"-aren pasahitza paperean - sistema\n"
+"errazegi konprometituko bailuke.\n"
+"\n"
+"Dena den, ez egin pasahitz luzeegia edo konplikatuegia, ahalegin handirik\n"
+"gabe gogoratzeko gai izan behar duzulako.\n"
+"\n"
+"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
+"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
+"tipografiko bera bi aldiz egiten baduzu, pasahitz ``oker'' hori erabili\n"
+"beharko duzu konektatzen zaren lehen aldian.\n"
+"\n"
+"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
+"konektatuko zaren galdetuko zaizu.\n"
+"\n"
+"Zure sareak LDAP (edo NIS) protokoloa erabiltzen badu autentifikatzeko,\n"
+"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ez badakizu, galdetu\n"
+"sare-administratzaileari.\n"
+"\n"
+"Zure ordenagailua administratutako sare batekin konektatuta ez badago,\n"
+"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
+"autentifikaziorako."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Before continuing, you should read carefully the terms of the license. It\n"
+"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
+"all the terms in it, click on the \"Refuse\" button which will immediately\n"
+"terminate the installation. To continue with the installation, click on the\n"
+"\"Accept\" button."
+msgstr ""
+"Aurrera jarraitu aurretik, arretaz irakurri lizentziaren baldintzak.\n"
+"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
+"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
+"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Onartu\"\n"
+"botoian."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installations. If you make any changes, you must at least define a root\n"
+"partition (\"/\"). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for \"/home\"\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
+"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio\n"
+"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
+"(\"/\") definitu behar duzu. Ez aukeratu partizio txikiegirik edo ezin\n"
+"izango duzu nahikoa software instalatu. Datuak beste partizio batean\n"
+"biltegiratu nahi badituzu, \"/home\"-rentzako partizio bat ere sortu\n"
+"beharko duzu (Linux partizio bat baino gehiago baduzu soilik da posible).\n"
+"\n"
+"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
+"\n"
+"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
+"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
+"\n"
+"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
+"bada, eta \"sd\", SCSI unitatea bada.\n"
+"\n"
+"\"Disko gogorraren zenbakia\" beti \\"hd\\" edo \\"sd\\"ren ondoko letra\n"
+"bat izaten da. IDE disko gogorretan:\n"
+"\n"
+" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
+"\n"
+" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
+"letrak \"bigarren SCSI ID baxuena\", etab."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Click on \"OK\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Egin klik \"Ados\" botoian disko gogor honetako datu eta partizio guztiak\n"
+"ezabatu nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango\n"
+"duzu disko gogor honetako daturik eta partiziorik berreskuratu, Windows-eko\n"
+"datuak barne.\n"
+"\n"
+"Egin klik \"Utzi\" botoian disko gogor honetako daturik eta partiziorik\n"
+"galdu gabe eragiketa hau bertan behera uzteko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
+"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
+"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
+"should come back to this step for help in at least two situations:\n"
+"\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
+"of your main disk (unless you are using another boot manager), to allow you\n"
+"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
+"your system). If you need to reinstall Windows, the Microsoft install\n"
+"process will rewrite the boot sector, and then you will not be able to\n"
+"start GNU/Linux!\n"
+"\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
+"contains a fair number of system tools for restoring a system, which has\n"
+"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
+"password, or any other reason.\n"
+"\n"
+"When you click on this step, you will be asked to enter a disk inside the\n"
+"drive. The floppy disk you will insert must be empty or contain data which\n"
+"you do not need. You will not have to format it since DrakX will rewrite\n"
+"the whole disk."
+msgstr ""
+"Mandrake Linux-en CD-ROMak inkorporatutako berreskuratze-modua dauka.\n"
+"Honela egin behar duzu: abiarazi CD-ROMetik, sakatu >>F1<< tekla abioan\n"
+"eta, gonbitean, idatzi >>rescue<< (berreskuratu). Baina zure ordenagailua\n"
+"CD-ROMetik ezin bada abiarazi, urrats honetara itzuli beharko duzu\n"
+"gutxienez bi egoeratan laguntzeko:\n"
+"\n"
+" * abioko kargatzailea instalatzean, DrakXk disko nagusiko abioko sektorea\n"
+"(MBR) berridatziko du (baldin eta ez baduzu beste abioko kudeatzaile bat\n"
+"erabiltzen), Windows-ekin nahiz GNU/Linux-ekin hasi ahal izan zaitezen\n"
+"(zure sisteman Windows baduzu). Windows berrinstalatzen baduzu,\n"
+"Microsoft-en instalazio-prozesuak abioko sektorea berridatziko du, eta gero\n"
+"ezin izango duzu GNU/Linux abiarazi!\n"
+"\n"
+" * arazoren bat sortzen bada eta GNU/Linux ezin baduzu abiarazi disko\n"
+"gogorretik, diskete hau izango da GNU/Linux abiarazteko bide bakarra.\n"
+"Sistema leheneratzeko makina bat sistema-tresna ditu, eta oso erabilgarria\n"
+"da sistemak huts egiten duenean, argindarra joan delako, idazketa-akats bat\n"
+"egin delako, pasahitzean akats tipografiko bat egin delako edo beste\n"
+"zerbait gertatu delako.\n"
+"\n"
+"Urrats honetan klik egitean, unitatean disko bat sartzeko eskatuko zaizu.\n"
+"Diskete huts bat sartu behar duzu, edo garrantzirik gabeko datuak dituen\n"
+"bat. Ez duzu formateatu beharrik DrakXk disko osoa berridatziko baitu."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Finally, depending on whether or not you selected individual packages, you\n"
+"will be presented a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right. When your selection is finished, click the \"Install\" button which\n"
+"will then launch the installation process. Depending on the speed of your\n"
+"hardware and the number of packages that need to be installed, it may take\n"
+"a while to complete the process. An estimate of the time it will take to\n"
+"install everything is displayed on the screen, to help you gauge if there\n"
+"is sufficient time to enjoy a cup of coffee.\n"
+"\n"
+"!! If a server package has been selected, either intentionally or because\n"
+"it was part of a whole group, you will be asked to confirm that you really\n"
+"want those servers to be installed. Under Mandrake Linux, any installed\n"
+"servers are started by default at boot time. Even if they are safe and have\n"
+"no known issues at the time the distribution was shipped, it may happen\n"
+"that security holes are discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default. !!\n"
+"\n"
+"The \"Automatic dependencies\" option simply disables the warning dialog\n"
+"which appears whenever the installer automatically selects a package. This\n"
+"occurs because it has determined that it needs to satisfy a dependency with\n"
+"another package in order to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows to load the\n"
+"package list chosen during a previous installation. Clicking on this icon\n"
+"will ask you to insert a floppy disk previously created at the end of\n"
+"another installation. See the second tip of last step on how to create such\n"
+"a floppy."
+msgstr ""
+"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, pakete\n"
+"guztiak taldetan eta azpitaldetan sailkatuta dituen zuhaitz bat aurkeztuko\n"
+"zaizu. Zuhaitza arakatuz, talde osoak, azpitaldeak nahiz pakete\n"
+"indibidualak hautatu ahal izango dituzu.\n"
+"\n"
+"Zuhaitzean pakete bat hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
+"eskuinean. Hautapena amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
+"instalazio-prozesua abiaraziko da. Zure hardwarearen abiaduraren arabera\n"
+"eta instalatu behar diren paketeen kopuruaren arabera, denbora beharko da\n"
+"prozesua burutzeko. Dena instalatzeko behar duen denboraren estimazioa\n"
+"pantailan bistaratzen da, kafetxo bat hartzeko astirik ote duzun jakin\n"
+"dezazun.\n"
+"\n"
+"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
+"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
+"eskatuko zaizu. Mandrake Linux-en, instalatutako zerbitzari oro\n"
+"lehenespenez abiarazten da abioan. Seguruak diren arren eta banaketa\n"
+"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
+"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
+"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
+"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
+"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
+"dira. !!\n"
+"\n"
+"\"Mendekotasun automatikoak\" aukerak, instalatzaileak pakete bat\n"
+"automatikoki hautatzen duenean agertzen den abisu-elkarrizketa desgaitzen\n"
+"du. Hori gertatzen da instalazioa behar bezala osatzeko, beste pakete\n"
+"batekiko mendekotasuna bete behar duela erabaki duelako instalatzaileak.\n"
+"\n"
+"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
+"instalazio batean aukeratutako pakete-zerrenda kargatzeko aukera ematen du.\n"
+"Ikono horretan klik egitean, beste instalazio baten bukaeran sortu zenuen\n"
+"diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko moduari\n"
+"buruzko azken urratsaren bigarren iradokizuna."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a filesystem).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"any of it.\n"
+"\n"
+"Click on \"OK\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"Cancel\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
+"for bad blocks on the disk."
+msgstr ""
+"Partizio definitu berriak formateatu egin behar dira erabili ahal izateko\n"
+"(formateatzeak fitxategi-sistema sortzea esan nahi du).\n"
+"\n"
+"Une honetan, lehendik dauden partizio batzuei berriro formatua eman nahi\n"
+"izango diezu beharbada, dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
+"hauta itzazu partizio horiek ere.\n"
+"\n"
+"Kontuan izan ez dela beharrezkoa lehendik dauden partizio guztiei berriro\n"
+"formatua ematea. Sistema eragilea daukaten partizioak berriro formateatu\n"
+"behar dituzu (esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu\n"
+"nahi dituzun datuak dituztenak (adibide tipikoa \"/home\" da).\n"
+"\n"
+"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
+"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
+"berreskuratu.\n"
+"\n"
+"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
+"\n"
+"Sakatu \"Utzi\" Mandrake Linux sistema eragile berria instalatzeko beste\n"
+"partizio bat aukeratu nahi baduzu.\n"
+"\n"
+"Sakatu \"Aurreratua\" partizio batzuk aztertu nahi badituzu hondatutako\n"
+"blokerik duten ikusteko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"Normally, DrakX selects the right keyboard for you (depending on the\n"
+"language you have chosen) and you won't even see this step. However, you\n"
+"might not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may still want\n"
+"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
+"located in Quebec, you may find yourself in the same situation. In both\n"
+"cases, you will have to go back to this installation step and select an\n"
+"appropriate keyboard from the list.\n"
+"\n"
+"Click on the \"More\" button to be presented with the complete list of\n"
+"supported keyboards."
+msgstr ""
+"Normalean, DrakXk teklatu egokia hautatuko dizu (aukeratutako hizkuntzaren\n"
+"arabera) eta urrats hau ikusi ere ez duzu egingo. Dena den, baliteke zure\n"
+"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
+"dakien suitzarra bazara, hizkuntza ingelesa hautatu arren Suitzako teklatua\n"
+"nahi izango duzu seguru asko. Edo ingeles hiztuna bazara baina Quebec-en\n"
+"bazaude, egoera berean egon zintezke. Bi kasuetan, instalazio-urrats\n"
+"honetan atzera jo eta teklatu egokia hautatu beharko duzu zerrendan.\n"
+"\n"
+"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
+"ikusteko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of drive\n"
+"(MBR)\"."
+msgstr ""
+"GNU/Linux-ekin abiarazteko behar den informazioa non kokatu nahi duzun\n"
+"adierazi behar duzu.\n"
+"\n"
+"Zer egiten ari zaren oso ongi ez badakizu, aukeratu \"Unitateko lehen\n"
+"sektorea (MBR)\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"OK\" to reboot the system. You can start\n"
+"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
+"soon as the computer has booted up again.\n"
+"\n"
+"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"\n"
+" * \"generate auto-install floppy\": to create an installation floppy disk\n"
+"which will automatically perform a whole installation without the help of\n"
+"an operator, similar to the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"Replay\". This is a partially automated installation as the\n"
+"partitioning step (and only this one) remains interactive;\n"
+"\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a great number of similar\n"
+"machines. See the Auto install section on our web site;\n"
+"\n"
+" * \"Save packages selection\"(*): saves the package selection as done\n"
+"previously. Then, when doing another installation, insert the floppy inside\n"
+"the drive and run the installation going to the help screen by pressing on\n"
+"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Hortxe duzu. Instalazioa osatu da eta GNU/Linux sistema prest duzu\n"
+"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo\n"
+"GNU/Linux abiaraz dezakezu, nahiago duzuna (abio bikoitza izanez gero),\n"
+"ordenagailua berrabiarazi bezain laster.\n"
+"\n"
+"\"Aurreratua\" botoiak (Aditu moduan soilik) beste bi botoi erakusten ditu:\n"
+"\n"
+" * \"sortu auto-instalazioko disketea\": instalazio oso bat, oraintxe\n"
+"konfiguratu duzuna bezalakoa, operadore baten laguntzarik gabe automatikoki\n"
+"egingo duen instalazio-diskete bat sortzeko.\n"
+"\n"
+"   Kontuan izan beste bi aukera daudela erabilgarri botoian klik egitean:\n"
+"\n"
+"    * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
+"partizio-urratsa (eta hau soilik) interaktiboa izango baita.\n"
+"\n"
+"    * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
+"erabat berridatziko da, eta datu guztiak galduko dira.\n"
+"\n"
+"   Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzen\n"
+"direnerako. Ikus Auto-instalazioa atala gure web gunean;\n"
+"\n"
+" * \"Gorde pakete-hautapena\"(*): lehen egindako pakete-hautapena gordetzen\n"
+"du. Gero, beste instalazio bat egitean, sartu disketea unitatean eta\n"
+"instalazioa exekutatzeko, joan laguntza-pantailara [F1] tekla sakatuz eta\n"
+"idatzi >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) FAT formatudun disketea behar duzu (GNU/Linux-en horrelako diskete bat\n"
+"sortzeko, idatzi \"mformat a:\")"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"DrakX now detects any IDE device present in your computer. It will also\n"
+"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection does not always detect a piece of hardware,\n"
+"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
+"if you know that there is a SCSI card installed in your machine. You will\n"
+"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
+"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
+"detected in your machine by selecting \"See hardware info\" and clicking\n"
+"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
+"return to the SCSI interface question.\n"
+"\n"
+"If you have to manually specify your adapter, DrakX will ask if you want to\n"
+"specify options for it. You should allow DrakX to probe the hardware for\n"
+"the card-specific options which the hardware needs to initialize. This\n"
+"usually works well.\n"
+"\n"
+"If DrakX is not able to probe for the options which need to be passed, you\n"
+"will need to provide options to the driver manually. Please review the\n"
+"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
+"Hardware'' section) for hints on retrieving the parameters required from\n"
+"hardware documentation, from the manufacturer's web site (if you have\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
+"Windows on your system)."
+msgstr ""
+"DrakXk zure ordenagailuan dagoen edozein IDE gailu detektatzen du orain.\n"
+"Zure sisteman PCI SCSI txartel bat edo gehiago dagoen ikusteko ere\n"
+"eskaneatuko du. SCSI txartel bat aurkitzen badu, DrakXk automatikoki\n"
+"instalatuko du kontrolatzaile egokia.\n"
+"\n"
+"Hardwarearen detekzioak batzuetan hardwareren bat ezingo duenez detektatu,\n"
+"DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu. Sakatu\n"
+"\"Bai\" zure makinan SCSI txartel bat instalatuta dagoela badakizu. SCSI\n"
+"txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko. Sakatu \"Ez\"\n"
+"SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure ordenagailuan\n"
+"detektatutako hardware-zerrenda ikus dezakezu \"Ikus hardwareari buruzko\n"
+"informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu hardware-zerrenda eta\n"
+"egin klik \"Ados\" botoian SCSI interfazearen galderara itzultzeko.\n"
+"\n"
+"Moldagailua eskuz zehaztu behar baduzu, DrakXk haren aukerak zehaztu nahi\n"
+"dituzun galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera\n"
+"zehatzak bila ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri.\n"
+"Horrek ondo funtzionatu ohi du.\n"
+"\n"
+"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
+"beharko dizkiozu kontrolatzaileari. Eskatutako parametroak\n"
+"fabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
+"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
+"eskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida'' (3.\n"
+"kapituluan, ``Zure hardwareari buruzko informazioa bildu'' atalean)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension;\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation;\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used;\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"Here, you can override this option;\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support;\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
+"selections."
+msgstr ""
+"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
+"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
+"\n"
+"Beste SEentzat, etiketa eta \"erroko\" partizioa soilik da sarrera.\n"
+"\n"
+"Linux-entzat, hainbat aukera daude:\n"
+"\n"
+" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
+"aukera hau hautatzeko;\n"
+"\n"
+" * Imajina: abiarazi beharreko nukleoaren izena izango da. Normalean,\n"
+"vmlinux edo vmlinux-en aldaera bat, luzapen batekin;\n"
+"\n"
+" * Errokoa: Linux instalazioaren \"erroko\" gailua edo ``/'';\n"
+"\n"
+" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea\n"
+"hasieratzen laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan\n"
+"gehienetan falta izaten diren 2. eta 3. botoien emulazioa gaitzeko\n"
+"teklatuan. Hona hemen adibide batzuk:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
+"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko\n"
+"emergentziazko abioa egin behar denean;\n"
+"\n"
+" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da.\n"
+"Ramdisk handi bat esleitu behar baduzu, aukera hau erabil dezakezu;\n"
+"\n"
+" * Irakurri/idatzi: normalean \"erroko\" partizioa irakurtzeko soilik\n"
+"agertzen da hasieran, fitxategi-sistemak egiaztatu ahal izateko, sistema\n"
+"``aktibo'' egin aurretik. Hemen, aukera hori gaindidatz dezakezu;\n"
+"\n"
+" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
+"aukera hau hauta dezakezu ``bideorikez'' moduan abiarazteko, jatorrizko\n"
+"frame buffer euskarriarekin;\n"
+"\n"
+" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
+"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau ``*''\n"
+"batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak ikusteko."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive;\n"
+"\n"
+" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
+"and swap partitions in free space of your hard drive;\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
+"\n"
+"    * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk;\n"
+"\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
+"\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
+"\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning;\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes;\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
+"\n"
+" * \"Done\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the ext2fs chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko d(ir)en\n"
+"aukeratu behar duzu. Partizioak jadanik definituta badaude, (GNU/Linux-en\n"
+"aurreko instalazio batek edo beste partizio-tresna batek definituta),\n"
+"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
+"partizioak definitu behar dira.\n"
+"\n"
+"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu.\n"
+"Partizioa egiteko diskoa hautatzeko, sakatu ``hda'' lehen IDE unitaterako,\n"
+"``hdb'' bigarrenerako, ``sda'' lehen SCSI unitaterako eta abar.\n"
+"\n"
+"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
+"ditzakezu:\n"
+"\n"
+" * \"Garbitu dena\": aukera honek hautatutako disko gogorreko partizio\n"
+"guztiak ezabatuko ditu;\n"
+"\n"
+" * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu \"Ext2\" eta\n"
+"swap partizioak disko gogorreko leku librean;\n"
+"\n"
+" * \"Gehiago\": eginbide gehiago aukeran izateko:\n"
+"\n"
+"    * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du.\n"
+"Baliagarria de geroago partizio-taula berreskuratzeko, behar izanez gero.\n"
+"Oso gomendagarria da urrats hau egitea;\n"
+"\n"
+"    * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
+"disketetik berreskuratzeko erabil daiteke;\n"
+"\n"
+"    * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago,\n"
+"berreskuratzen saia zaitezke aukera hau erabiliz. Kontuz ibili eta gogoan\n"
+"izan huts egin dezakeela;\n"
+"\n"
+"    * \"Birkargatu partizio-taula\": aldaketa guztiak desegin eta hasierako\n"
+"partizio-taula kargatzen du;\n"
+"\n"
+"    * \"Euskarri aldagarrien automuntatzea\": aukera hau desgaitzen baduzu,\n"
+"euskarri aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu\n"
+"eta desmuntatzera behartuko dituzu erabiltzaileak.\n"
+"\n"
+" * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko\n"
+"morroia erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia\n"
+"erabiltzea gomendatzen dizugu;\n"
+"\n"
+" * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil dezakezu;\n"
+"\n"
+" * \"Aldatu modu normalera/aditu modura\": partizioekin gauza gehiago\n"
+"egiteko aukera ematen du (mota, aukerak, formatua) eta informazio gehiago\n"
+"ematen du;\n"
+"\n"
+" * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
+"berriro diskoan gordeko ditu.\n"
+"\n"
+"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik\n"
+"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
+"\n"
+"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
+"\n"
+" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta\n"
+"dagoenean);\n"
+"\n"
+" * Ktrl-d partizioa ezabatzeko;\n"
+"\n"
+" * Ktrl-m muntatze-puntua ezartzeko.\n"
+"\n"
+"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi\n"
+"baduzu, irakurri ext2fs kapitulua ``Erreferentzia-eskuliburua''n.\n"
+"\n"
+"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS\n"
+"``bootstrap'' partizio txiki bat sortzea komeniko zaizu, yaboot abioko\n"
+"kargatzaileak erabil dezan. Partizioa zertxobait handiagoa egitea hautatzen\n"
+"baduzu, adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta\n"
+"ramdisk imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
+
diff --git a/perl-install/share/po/help-fr.pot b/perl-install/share/po/help-fr.pot
new file mode 100644
index 000000000..ee17d2e5b
--- /dev/null
+++ b/perl-install/share/po/help-fr.pot
@@ -0,0 +1,1797 @@
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+msgstr ""
+"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Please choose your preferred language for installation and system usage.\n"
+"\n"
+"Clicking on the \"Advanced\" button will allow you to select other\n"
+"languages to be installed on your workstation. Selecting other languages\n"
+"will install the language-specific files for system documentation and\n"
+"applications. For example, if you will host users from Spain on your\n"
+"machine, select English as the main language in the tree view and in the\n"
+"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"\n"
+"Note that multiple languages may be installed. Once you have selected any\n"
+"additional locales, click the \"OK\" button to continue."
+msgstr ""
+"Veuillez choisir votre langue de communication. Celle-ci sera utilisee\n"
+"durant le processus d'installation, ainsi que durant les mises à jour de\n"
+"votre système.\n"
+"\n"
+"En cliquant sur « Avance », le programme vous proposera egalement d'autres\n"
+"langues pouvant être installees sur votre station de travail. En\n"
+"choisissant d'autres langues, le programme vous installera toute la\n"
+"documentation et les applications necessaires à l'utilisation de cette\n"
+"autre langue. Par exemple, si vous prevoyez d'accueillir des utilisateurs\n"
+"d'Espagne sur votre serveur, choisissez l'anglais comme langue principale,\n"
+"et, dans la section avancee, cliquez sur l'etoile grise correspondant à\n"
+"Spanish|Spain.\n"
+"\n"
+"Sachez que plusieurs langues peuvent être installees. Une fois votre\n"
+"selection complète terminee, cliquez sur « OK » pour continuer."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"At this point, you need to choose where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space, you will\n"
+"need to partition it. Basically, partitioning a hard drive consists of\n"
+"logically dividing it to create space to install your new Mandrake Linux\n"
+"system.\n"
+"\n"
+"Because the partitioning process' effects are usually irreversible,\n"
+"partitioning can be intimidating and stressful if you are an inexperienced\n"
+"user. Fortunately, there is a wizard which simplifies this process. Before\n"
+"beginning, please consult the manual and take your time.\n"
+"\n"
+"If you are running the installation in Expert mode, you will enter\n"
+"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
+"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
+"From the installation interface, you can use the wizards as described here\n"
+"by clicking the dialog's \"Wizard\" button.\n"
+"\n"
+"If partitions have already been defined, either from a previous\n"
+"installation or from another partitioning tool, simply select those to\n"
+"install your Linux system.\n"
+"\n"
+"If partitions are not defined, you will need to create them using the\n"
+"wizard. Depending on your hard drive configuration, several options are\n"
+"available:\n"
+"\n"
+" * \"Use free space\": this option will simply lead to an automatic\n"
+"partitioning of your blank drive(s). You will not be prompted further;\n"
+"\n"
+" * \"Use existing partition\": the wizard has detected one or more existing\n"
+"Linux partitions on your hard drive. If you want to use them, choose this\n"
+"option;\n"
+"\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
+"be performed without the loss of any data, provided you previously\n"
+"defragment the Windows partition. Backing up your data won't hurt either..\n"
+"This solution is recommended if you want to use both Mandrake Linux and\n"
+"Microsoft Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
+"\n"
+" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
+"present on your hard drive and replace them with your new Mandrake Linux\n"
+"system, choose this option. Be careful with this solution because you will\n"
+"not be able to revert your choice after you confirm;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Remove Windows\": this will simply erase everything on the drive and\n"
+"begin fresh, partitioning everything from scratch. All data on your disk\n"
+"will be lost;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Expert mode\": choose this option if you want to manually partition\n"
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
+msgstr ""
+"Cette etape vous permet de determiner precisement l'emplacement de votre\n"
+"installation de Mandrake Linux. Si votre disque est vide ou utilise par un\n"
+"autre système d'exploitation, vous devrez repartitionner votre disque.\n"
+"Partitionner un disque signifie de le diviser precisement afin de creer un\n"
+"espace pour votre installation.\n"
+"\n"
+"Comme les effets du partition sont irreversibles (l'ensemble du disque est\n"
+"efface), le partitionnement est generalement intimidant et stressant pour\n"
+"un utilisateur inexperimente. Heureusement, une interface a ete prevue à\n"
+"cet effet. Avant de commencer, revisez vos manuels et surtout, prenez votre\n"
+"temps.\n"
+"\n"
+"Si vous êtes en mode expert, l'application DiskDrake, l'outil de\n"
+"partitionnement de Mandrake Linux, vous permettra de determiner precisement\n"
+"l'emplacement de chacune de vos partitions. À partir de l'interface\n"
+"d'installation, vous pouvez lancer les assistants en cliquant sur\n"
+"« Assistant ».\n"
+"\n"
+"Si des partitions ont dejà ete definies, peu importe qu'elles proviennent\n"
+"d'une autre installation ou d'un autre outil de partitionnement, il vous\n"
+"suffit de simplement choisir sur quelle partition vous voulez installer\n"
+"Mandrake.\n"
+"\n"
+"Si vos partitions ne sont pas definies, vous devrez les creer en utilisant\n"
+"l'assistant. Selon la configuration de votre disque, plusieurs options sont\n"
+"disponibles :\n"
+"\n"
+" * « Utilisez l'espace disponible » : cette option tentera simplement de\n"
+"partitionner automatiquement l'espace inutilise sur votre disque. Il n'y\n"
+"aura pas d'autre question.\n"
+"\n"
+" * « Utiliser les partitions existantes » : l' assistant a detecte une ou\n"
+"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
+"utiliser, choisissez cette option.\n"
+"\n"
+" * « Utilisez l'espace libre sur une partition Windows » : si Microsoft\n"
+"Windows est installe sur votre disque et prend l'ensemble de l'espace vous\n"
+"devez creer une place pour votre installation Mandrake. Pour ce faire, vous\n"
+"pouvez tout effacer (voir « effacer tout le disque » ou « Mode expert ») ou\n"
+"vous pouvez redimensionner l'espace utilise par Windows. Le\n"
+"redimensionnement peut être effectue sans pertes de donnees, à condition\n"
+"que vous ayez prealablement defragmente la partition Windows. Une\n"
+"sauvegarde de Vos donnees ne fera pas de mal non plus. Cette seconde option\n"
+"peut être accomplie sans perte de donnees. Cette solution est recommandee\n"
+"pour faire cohabiter Linux et Windows sur le même ordinateur.\n"
+"\n"
+"   Avant de choisir cette option, il faut comprendre qu'après cette\n"
+"procedure l'espace disponible pour Windows sera reduit. Vous aurez moins\n"
+"d'espace pour installer des logiciels ou sauvegarder de l'information avec\n"
+"Windows.\n"
+"\n"
+" * « Effacer tout le disque »: si vous voulez effacer toutes les donnees et\n"
+"les applications installees sur votre système et les remplacer par votre\n"
+"nouveau système Mandrake Linux, choisissez cette option. Soyez prudent, car\n"
+"ce choix est irreversible et permanent. Il vous sera impossible de\n"
+"retrouver vos donnees effacees.\n"
+"\n"
+"   !! En choisissant cette option, l'ensemble du contenu de votre disque\n"
+"sera detruit. !!\n"
+"\n"
+" * « Supprimer Microsoft Windows »: ce choix effacera tout simplement ce\n"
+"que contient le disque et recommencera à zero. Toutes les donnees et les\n"
+"programmes presents sur le disque seront effaces.\n"
+"\n"
+"   !! En choisissant cette option, l'ensemble de votre disque sera efface.\n"
+"!!\n"
+"\n"
+" * « Mode expert »: permet de partitionner manuellement votre disque. Soyez\n"
+"prudent, parce que bien que plus puissante, cette option est dangereuse.\n"
+"Vous pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
+"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
+"devez faire."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
+"will try to configure X automatically.\n"
+"\n"
+"It is extremely rare for it to fail, unless the hardware is very old (or\n"
+"very new). If it succeeds, it will start X automatically with the best\n"
+"resolution possible, depending on the size of the monitor. A window will\n"
+"then appear and ask you if you can see it.\n"
+"\n"
+"If you are doing an \"Expert\" installation, you will enter the X\n"
+"configuration wizard. See the corresponding section of the manual for more\n"
+"information about this wizard.\n"
+"\n"
+"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
+"will proceed to the next step. If you cannot see the message, it simply\n"
+"means that the configuration was wrong and the test will automatically end\n"
+"after 10 seconds, restoring the screen."
+msgstr ""
+"X (pour le X Window system) est le coeur de votre interface graphique sous\n"
+"GNU/Linux. Tous les environnements graphiques (Gnome, KDE, Afterstep, ...)\n"
+"presents sur Mandrake Linux dependent de X. A cette etape, DrakX, va tenter\n"
+"de le configurer automatiquement.\n"
+"\n"
+"Il est très rare que cette etape echoue, à moins d'avoir un equipement\n"
+"obsolète (ou trop recent). Si le processus reussit, il va demarrer X\n"
+"automatiquement avec la meilleure resolution d'ecran possible, en fonction\n"
+"de la taille du moniteur. Une fenêtre apparaît alors vous demandant si\n"
+"cette configuration vous convient.\n"
+"\n"
+"Si vous faites une installation « Expert », vous entrerez dans\n"
+"l'information de configuration de X. Voir les sections correspondantes du\n"
+"manuel pour plus d'information.\n"
+"\n"
+"Si vous pouvez voir le message et cliquez sur oui, DrakX continuera à la\n"
+"prochaine etape. Si vous ne pouvez voir la fenêtre, ceci signifie que le\n"
+"test a echoue et vous serez ramene à l'ecran precedant en 10 secondes."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Your new Mandrake Linux operating system is currently being installed.\n"
+"Depending on the number of packages you will be installing and the speed of\n"
+"your computer, this operation could take from a few minutes to a\n"
+"significant amount of time.\n"
+"\n"
+"Please be patient."
+msgstr ""
+"Votre nouveau système Mandrake Linux est maintenant en cours\n"
+"d'installation. Selon le nombre de paquetages à installer et la puissance\n"
+"de votre ordinateur, cette operation peut prendre de quelques minutes à\n"
+"quelques heures."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
+"partition. Be careful, all data present on it will be lost and will not be\n"
+"recoverable!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"GNU/Linux is a multiuser system, and this means that each user can have his\n"
+"own preferences, his own files and so on. You can read the ``User Guide''\n"
+"to learn more. But unlike \"root\", which is the administrator, the users\n"
+"you will add here will not be entitled to change anything except their own\n"
+"files and their own configuration. You will have to create at least one\n"
+"regular user for yourself. That account is where you should log in for\n"
+"routine use. Although it is very practical to log in as \"root\" everyday,\n"
+"it may also be very dangerous! The slightest mistake could mean that your\n"
+"system would not work any more. If you make a serious mistake as a regular\n"
+"user, you may only lose some information, but not the entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
+"as you can actually enter whatever you want. DrakX will then take the first\n"
+"word you have entered in the box and will bring it over to the \"User\n"
+"name\". This is the name this particular user will use to log onto the\n"
+"system. You can change it. You then have to enter a password here. A\n"
+"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
+"from a security point of view, but that is no reason to neglect it: after\n"
+"all, your files are at risk.\n"
+"\n"
+"If you click on \"Accept user\", you can then add as many as you want. Add\n"
+"a user for each one of your friends: your father or your sister, for\n"
+"example. When you finish adding all the users you want, select \"Done\".\n"
+"\n"
+"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
+"for that user (bash by default)."
+msgstr ""
+"GNU/Linux est un système multi-utilisateurs, ce qui signifie generalement\n"
+"que chaque utilisateur peut avoir des preferences differences, ses propres\n"
+"fichiers, etc. Pour plus d'informations, consultez le manuel d'utilisation.\n"
+"Contrairement à « root » qui a tous les droits, les utilisateurs que vous\n"
+"ajouterez ici n'auront que des permissions pour agir sur leurs propres\n"
+"fichiers exclusivement.\n"
+"\n"
+"L'utilisateur/administrateur devrait egalement se creer un compte\n"
+"« normal ». C'est à travers cet utilisateur que celui-ci devrait se\n"
+"connecter pour accomplir ses tâches quotidiennes. Car, bien qu'il soit\n"
+"pratique d'avoir tous les accès, cette situation peut egalement engendrer\n"
+"des situations desastreuses si un fichier est detruit par inadvertance. Un\n"
+"utilisateur normal n'ayant pas accès aux fichiers sensibles, ne peut causer\n"
+"de dommages majeurs.\n"
+"\n"
+"Il faut d'abord entrer le vrai nom de la personne. Évidemment, vous pouvez\n"
+"y inscrire n'importe quoi. DrakX prendra le premier mot insere et le\n"
+"transposera comme « Nom de login ». C'est le nom qui sera utilise pour se\n"
+"connecter au système. Vous pouvez le modifier. Il faut maintenant entrer un\n"
+"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
+"« root », mais ce n'est pas une raison pour rentrer 123456. Après tout,\n"
+"ceci mettrait vos fichiers en peril.\n"
+"\n"
+"Si vous cliquez « Accepter », il vous sera possible d'ajouter d'autres\n"
+"utilisateurs. Creez un utilisateur different pour chaque personne devant\n"
+"utiliser votre ordinateur. Une fois chaque utilisateur defini, cliquez sur\n"
+"« Terminer ».\n"
+"\n"
+"En cliquant sur « Avance », vous pourrez selectionner un « shell »\n"
+"different pour cet utilisateur (bash est assigne par defaut)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Finally, you will be asked whether you want to see the graphical interface\n"
+"at boot. Note this question will be asked even if you chose not to test the\n"
+"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
+"act as a server, or if you were not successful in getting the display\n"
+"configured."
+msgstr ""
+"Finalement, il vous sera demande si vous souhaitez obtenir l'interface\n"
+"graphique dès le demarrage ou non. Notez que cette question sera posee même\n"
+"si vous choisissez de ne pas tester la configuration. Il est evidemment\n"
+"souhaitable de repondre « Non » si cette machine est un serveur sur\n"
+"laquelle personne n'est censee travailler en mode graphique."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful to\n"
+"choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt;\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information;\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt;\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful as\n"
+"to choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message that is displayed before the boot\n"
+"prompt.\n"
+"\n"
+" * Boot Device: indicate where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
+"hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux.\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected.\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose \"N\" for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"At this point, it is time to choose the security level desired for the\n"
+"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
+"the data stored in it is crucial, the higher the security level should be.\n"
+"However, a higher security level is generally obtained at the expense of\n"
+"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
+"to get more information about the meaning of these levels.\n"
+"\n"
+"If you do not know what to choose, keep the default option."
+msgstr ""
+"À cette etape, vous devrez determiner le niveau de securite requis par\n"
+"votre système. Le niveau de securite requis se determine en fonction de\n"
+"l'exposition du système à d'autres utilisateurs (s'il est connecte\n"
+"directement sur Internet par exemple) et selon le niveau de sensibilite de\n"
+"l'information contenu dans le système (des numeros de carte de credit par\n"
+"exemple). Sachez que, de manière generale, plus la securite d'un système\n"
+"est elevee, plus il est complexe à operer. Referez-vous au chapitre\n"
+"« msec » du « Manuel de reference » pour obtenir plus d'informations sur\n"
+"les niveaux de securite.\n"
+"\n"
+"Si vous ne savez pas quel niveau choisir, gardez la selection par defaut."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Please select the correct port. For example, the COM1 port under MS Windows\n"
+"is named ttyS0 under GNU/Linux."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Here are presented various parameters concerning your machine. Depending on\n"
+"your installed hardware, you may - or not, see the following entries:\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary;\n"
+"\n"
+" * \"Keyboard\": check the current keyboard map configuration and click on\n"
+"the button to change that if necessary;\n"
+"\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
+"\n"
+" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"configuration wizard;\n"
+"\n"
+" * \"Sound card\": if a sound card is detected on your system, it is\n"
+"displayed here. No modification possible at installation time;\n"
+"\n"
+" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+"here. No modification possible at installation time;\n"
+"\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+"displayed here. You can click on the button to change the parameters\n"
+"associated with it."
+msgstr ""
+"On vous presente ici les differents paramètres de votre système. Selon le\n"
+"materiel installe, certaines entrees seront presentes et d'autres pas.\n"
+"\n"
+" * « Souris »: pour verifier la configuration actuelle de la souris.\n"
+"Cliquez sur le bouton pour modifier les options.\n"
+"\n"
+" * « Clavier »: verifie la configuration choisie pour le clavier. Cliquez\n"
+"sur le bouton pour la modifier.\n"
+"\n"
+" * « Fuseau horaire »: DrakX, par defaut, essaie de trouver le fuseau\n"
+"horaire dans lequel vous êtes. Encore une fois, il est possible que vous ne\n"
+"soyez pas dans le fuseau horaire qui vous convient. Donc, vous aurez\n"
+"peut-être à cliquer sur le bouton « fuseau horaire » pour identifier\n"
+"precisement l'heure qui doit apparaître dans vos horloges.\n"
+"\n"
+" * « Imprimante »: en cliquant sur « Pas d'imprimante », l'outil de\n"
+"configuration sera demarre.\n"
+"\n"
+" * « Carte son »: si une carte son a ete detectee, elle apparaîtra ici.\n"
+"Aucune modification n'est possible à cette etape.\n"
+"\n"
+" * « Carte TV »: si une carte d'entree/sortie video (carte TV) a ete\n"
+"detectee, elle apparaîtra ici. Aucune modification possible à cette etape.\n"
+"\n"
+" * « Carte ISDN »: si une carte ISDN est detectee, elle apparaîtra ici.\n"
+"Vous pouvez cliquer sur le bouton pour en modifier les paramètres."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
+"installation or if you want to have greater control (\"Expert\"). You can\n"
+"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
+"system:\n"
+"\n"
+" * \"Install\": completely wipes out the old system. In fact, depending on\n"
+"what currently holds your machine, you will be able to keep some old (Linux\n"
+"or other) partitions unchanged;\n"
+"\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
+"\n"
+" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
+"existing Mandrake Linux system while keeping all system configurations\n"
+"unchanged. Adding new packages to the current installation is also\n"
+"possible.\n"
+"\n"
+"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
+"release.\n"
+"\n"
+"Depending on your knowledge of GNU/Linux, select one of the following\n"
+"choices:\n"
+"\n"
+" * Recommended: choose this if you have never installed a GNU/Linux\n"
+"operating system. The installation will be very easy and you will only be\n"
+"asked a few questions;\n"
+"\n"
+" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
+"installation class. The expert installation will allow you to perform a\n"
+"highly-customized installation. Answering some of the questions can be\n"
+"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
+"choose this unless you know what you are doing."
+msgstr ""
+"DrakX doit maintenant savoir quel type d'installation vous desirez\n"
+"realiser. Deux types d'installations sont proposes : Par defaut (« \n"
+"Recommandee »), qui limite le nombre de questions à l'utilisateur au\n"
+"minimum ou « Expert » qui vous permet de selectionner individuellement\n"
+"chacune des composantes à installer. Également, on vous propose de faire\n"
+"une « Installation » ou une « Mise à jour » d'un système Mandrake Linux\n"
+"existant :\n"
+"\n"
+" * « Installation » : balaye l'ancien système. En fait, selon ce que votre\n"
+"machine comporte, vous pourrez garder intacte certaines des anciennes\n"
+"partition (Linux ou autres) ;\n"
+"\n"
+" * « Mise à jour » : cette classe d'installation permet de simplement\n"
+"mettre à jours les paquetages qui composent votre système Mandrake Linux.\n"
+"Elle conserve les partitions existantes, ainsi que la configuration des\n"
+"utilisateurs. Toutes les autres etapes de l'installation sont accessibles\n"
+"en comparaison avec une installation classique ;\n"
+"\n"
+" * « Mise à jour des paquetages uniquement » : Cette nouvelle classe\n"
+"d'installation permet de mettre à jour un système Mandrake Linux existant,\n"
+"tout en gardant sa configuration inchangee. L'ajout de nouveaux paquetages\n"
+"durant la mise à jour est cependant possible.\n"
+"\n"
+"La mise à jour devrait fonctionner correctement pour les système Mandrake\n"
+"Linux à partir de la version « 8.1 ».\n"
+"\n"
+"Selon votre niveau d'expertise avec les systèmes d'exploitations GNU/Linux,\n"
+"il faut choisir l'un des deux types d'installations suivants:\n"
+"\n"
+" * « Recommandee »: choisissez cette option si vous n'avez jamais installe\n"
+"de système d'exploitation GNU/Linux. C'est la methode la plus facile, la\n"
+"plupart des choix ont dejà ete fait pour vous.\n"
+"\n"
+" * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez\n"
+"choisir ce type d'installation. Cette methode vous permettra de\n"
+"personnaliser l'ensemble des composantes de votre système. Ces questions\n"
+"peuvent s'averer complexes, particulièrement en matière de partitionnement\n"
+"et du choix des paquetages installes. En consequence, il n'est pas\n"
+"recommande de s'y aventurer sans de bonnes connaissances au prealable."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Some bugs may have\n"
+"been fixed, and security issues solved. To allow you to benefit from these\n"
+"updates, you are now proposed to download them from the Internet. Choose\n"
+"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
+"to install updated packages later.\n"
+"\n"
+"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"retrieved. Choose the one nearest you. Then a package-selection tree\n"
+"appears: review the selection, and press \"Install\" to retrieve and\n"
+"install the selected package(s), or \"Cancel\" to abort."
+msgstr ""
+"Au moment où vous êtes en train d'installer Mandrake Linux, il est possible\n"
+"que certains paquetages aient ete mis à jour depuis la sortie du produit.\n"
+"Des bogues ont pu être corriges, et des problèmes de securite resolus. Pour\n"
+"vous permettre de beneficier de ces mises à jour, il vous est maintenant\n"
+"propose de les tele-charger sur Internet. Choisissez « Oui » si vous avez\n"
+"une connexion Internet, ou « Non » si vous preferez installer les mises à\n"
+"jour plus tard.\n"
+"\n"
+"En choisissant « Oui », la liste des sites depuis lesquels les mises à\n"
+"jours peuvent être tele-chargees est affichee. Choisissez le site le plus\n"
+"proche. Puis un arbre de choix des paquetages apparaît : verifiez la\n"
+"selection, puis cliquez sur « Installer » pour tele-charger et installer\n"
+"les mises à jour selectionnees, ou « Annuler » pour abandonner."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
+"accordingly, depending on what it finds here:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
+"OS;\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If in doubt, DrakX will display a dialog with various options.\n"
+"\n"
+" * \"Bootloader to use\": you have three choices:\n"
+"\n"
+"    * \"GRUB\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
+"interface.\n"
+"\n"
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
+"interface.\n"
+"\n"
+" * \"Boot device\": in most cases, you will not change the default\n"
+"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
+"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"\n"
+" * \"Delay before booting the default image\": when rebooting the computer,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"another boot entry than the default one.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
+"Linux system! Also, be sure you know what you do before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
+"options, which are reserved to the expert user.\n"
+"\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options which will be available at boot time will be displayed.\n"
+"\n"
+"If there is another operating system installed on your machine, it will\n"
+"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
+"the existing options. Select an entry and click \"Modify\" to modify or\n"
+"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"installation step."
+msgstr ""
+"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette etape est\n"
+"normalement complètement automatique. En fait, DrakX analyse le secteur de\n"
+"demarrage (master boot record) et agit en fonction de ce qu'il peut y lire\n"
+":\n"
+"\n"
+" * Si un secteur de demarrage Windows est detecte, il va être remplacer par\n"
+"LILO/GRUB. Donc, vous serez capable de demarrer GNU/Linux et tout autre\n"
+"système d'exploitation.\n"
+"\n"
+" * si GRUB ou LILO est detecte, il sera remplace par la nouvelle version;\n"
+"\n"
+"En cas de doute, DrakX affiche differentes options.\n"
+"\n"
+" * « Programme d'amorçage à utiliser » vous propose trois choix :\n"
+"\n"
+"    * « GRUB » : si vous preferer GRUB (menu texte).\n"
+"\n"
+"    * « LILO en mode graphique » : si vous preferez l'interface graphique.\n"
+"\n"
+"    * « LILO en mode texte » : si vous preferez la version texte de LILO.\n"
+"\n"
+" * « Peripheriques de demarrage »: dans la plupart des cas, vous n'aurez\n"
+"pas à changer le disque par defaut (« /dev/hda », mais si vous le desirez,\n"
+"le programme d'amorce peut être installe sur un second disque,\n"
+"« /dev/hdb », ou même sur une disquette, « /dev/fd0 ».\n"
+"\n"
+" * « Delais avant l'activation du choix par defaut »: au redemarrage de\n"
+"l'ordinateur, il s'agit du temps accorde à l'utilisateur pour demarrer un\n"
+"autre système d'exploitation.\n"
+"\n"
+"!! Prenez garde, si vous decidez de ne pas installer de programme d'amorce\n"
+"(en cliquant sur « Annuler »), vous devez vous assurez d'avoir une methode\n"
+"pour demarrer le système. Aussi, assurez vous de bien savoir ce que vous\n"
+"faites si vous modifiez les options. !!\n"
+"\n"
+"En cliquant sur « Avancee », vous aurez accès à plusieurs autres options de\n"
+"configuration. Sachez que celles-ci sont reservees aux experts en la\n"
+"matière.\n"
+"\n"
+"Si vous avez d'autres systèmes d'exploitation installes sur votre\n"
+"ordinateur, ils seront automatiquement detectes et ajout à vos menus de\n"
+"demarrage. À cette etape, vous pouvez decider de preciser ces options. En\n"
+"double-cliquant sur une entree existante vous pourrez la parametrer à votre\n"
+"guise, ou l'enlever. « Ajouter » permet de creer de nouvelles entrees, et\n"
+"« terminer » vous conduit à la prochaine etape d'installation."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"More than one Microsoft Windows partition has been detected on your hard\n"
+"drive. Please choose the one you want resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"The first time you try the X configuration, you may not be very satisfied\n"
+"with its display (screen is too small, shifted left or right...). Hence,\n"
+"even if X starts up correctly, DrakX then asks you if the configuration\n"
+"suits you. It will also propose to change it by displaying a list of valid\n"
+"modes it could find, asking you to select one.\n"
+"\n"
+"As a last resort, if you still cannot get X to work, choose \"Change\n"
+"graphics card\", select \"Unlisted card\", and when prompted on which\n"
+"server, choose \"FBDev\". This is a failsafe option which works with any\n"
+"modern graphics card. Then choose \"Test again\" to be sure."
+msgstr ""
+"Il se peut que vous ne soyez pas entièrement satisfait à la première\n"
+"tentative de configuration graphique (ecran trop petit, peu de\n"
+"couleurs...). Ainsi, même si X demarre correctement, DrakX vous demande si\n"
+"la configuration vous convient. Il proposera aussi de la changer en\n"
+"affichant une liste des modes valides, si possible.\n"
+"\n"
+"En dernier recours, si vous ne pouvez pas faire fonctionner X, choisissez\n"
+"« Changer la carte graphique », selectionnez « carte non listee », et\n"
+"lorsqu'il vous sera demande le serveur graphique, choisissez « FBDev ».\n"
+"c'est une option de secours qui fonctionnera sur n'importe quelle carte\n"
+"graphique moderne. Choisissez ensuite « Tester à nouveau » pour vous\n"
+"assurer que tout va bien."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"DrakX generally detects the number of buttons your mouse has. If not, it\n"
+"assumes you have a two-button mouse and will set it up for third-button\n"
+"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
+"USB mouse.\n"
+"\n"
+"If you wish to specify a different type of mouse select the appropriate\n"
+"type from the provided list.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct. If the mouse is not working well, press the space bar or [Return]\n"
+"to \"Cancel\" and choose again."
+msgstr ""
+"DrakX detecte generalement le nombre de boutons de votre souris. Sinon, il\n"
+"prend pour acquis que vous avez une souris à deux boutons et configurera\n"
+"l'emulation du troisième bouton. Également, DrakX saura automatiquement si\n"
+"vous avez une souris PS/2, serie ou USB.\n"
+"\n"
+"Si vous desirez installer une souris differente, veuillez la selectionner à\n"
+"partir de la liste qui vous est proposee.\n"
+"\n"
+"Si vous selectionnez une souris differente de celle choisie par defaut,\n"
+"DrakX vous presentera un ecran de test. Utilisez les boutons et la roue\n"
+"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
+"fonctionne pas normalement, appuyer sur la barre d'espacement ou [Entree]\n"
+"ou encore « Annuler », puis, selectionner une autre souris."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"You are now proposed to set up your Internet/network connection. If you\n"
+"wish to connect your computer to the Internet or to a local network, click\n"
+"\"OK\". The autodetection of network devices and modem will be launched. If\n"
+"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
+"may also choose not to configure the network, or do it later; in that case,\n"
+"simply click the \"Cancel\" button.\n"
+"\n"
+"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"Here, we will not detail each configuration. Simply make sure that you have\n"
+"all the parameters from your Internet Service Provider or system\n"
+"administrator.\n"
+"\n"
+"You can consult the ``User Guide'' chapter about Internet connections for\n"
+"details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection.\n"
+"\n"
+"If you wish to configure the network later after installation, or if you\n"
+"are finished configuring your network connection, click \"Cancel\"."
+msgstr ""
+"Si vous desirez connecter votre système à un reseau ou à l'Internet,\n"
+"cliquez sur « OK ». L'autodetection des peripheriques reseau et modems sera\n"
+"alors lancee. Si cette detection echoue, decochez la case « Utiliser\n"
+"l'autodetection ». Vous pouvez aussi choisir de ne pas configurer le\n"
+"reseau, ou de le faire plus tard. Dans ce cas, cliquez simplement sur\n"
+"« Annuler ».\n"
+"\n"
+"Les types de connexion supportees sont : modem telephonique, modem ISDN,\n"
+"connexion ADSL, modem câble ou simplement LAN (reseau ethernet).\n"
+"\n"
+"Nous ne detaillerons pas ici chacune des configurations possible. Assurez\n"
+"vous seulement que vous avez toutes les informations de votre fournisseur\n"
+"de service Internet à portee de main.\n"
+"\n"
+"Vous pouvez consulter le chapitre du « Guide de l'utilisateur » concernant\n"
+"les connexions à Internet pour plus de details à propos des configurations\n"
+"specifiques de chaque type de connexion. Vous pouvez egalement configurer\n"
+"votre connexion à Internet une fois l'installation terminee.\n"
+"\n"
+"Si vous desirez configurer votre reseau plus tard ou si vous avez termine\n"
+"l'installation de votre reseau, cliquez sur « Annuler »."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"You may now choose which services you wish to start at boot time.\n"
+"\n"
+"Here are presented all the services available with the current\n"
+"installation. Review them carefully and uncheck those which are not always\n"
+"needed at boot time.\n"
+"\n"
+"You can get a short explanatory text about a service by selecting a\n"
+"specific service. However, if you are not sure whether a service is useful\n"
+"or not, it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services which you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Vous pouvez maintenant choisir les services disponibles au demarrage de\n"
+"votre système.\n"
+"\n"
+"Ici sont presentes tous les services disponibles avec l'installation en\n"
+"place. Faites une bonne verification et enlevez tout ce qui n'est pas\n"
+"absolument necessaire au demarrage du système.\n"
+"\n"
+"Vous pouvez obtenir une courte explication des services en les\n"
+"selectionnant specifiquement. Cela dit, si vous n'êtes pas certain de\n"
+"l'application d'un service, conservez les paramètres par defaut\n"
+"\n"
+"!! À cette etape, soyez particulièrement attentif dans le cas d'un système\n"
+"destine à agir comme serveur. Dans ce cas, vous voudrez probablement\n"
+"permettre exclusivement les services necessaires. !!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if your machine is to be used for programming, choose\n"
+"the desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\": installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server;\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"C'est maintenant le moment de choisir les paquetages qui seront installes\n"
+"sur votre système. Sachez que Mandrake Linux contient plusieurs milliers de\n"
+"paquetages à installer, et qu'il n'est pas necessaire de tous les connaître\n"
+"par coeur.\n"
+"\n"
+"Si vous êtes en train de faire une installation normale à partir d'un\n"
+"CDROM, il vous sera d'abord demande de specifier quel CD vous avez (en mode\n"
+"Expert). Verifier les etiquettes et cliquez sur les boîtes leur etant\n"
+"associees. Cliquez sur « OK », lorsque vous êtes prêt à continuer.\n"
+"\n"
+"Les paquetages sont regroupes selon la nature de l'installation. Les\n"
+"groupes sont divises en quatre sections principales :\n"
+"\n"
+" * « Station de travail »: si vous comptez utiliser votre machine ainsi,\n"
+"selectionner un ou plusieurs groupes y correspondant.\n"
+"\n"
+" * « Environnement graphique »: ce groupe vous permettra de determiner quel\n"
+"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
+"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
+"\n"
+" * « Developpement »: si votre système sera utilise pour la programmation,\n"
+"choisissez les groupes desires.\n"
+"\n"
+" * « Serveur »: finalement, si vous système doit agir en tant que serveur,\n"
+"vous pourrez selectionner les services que vous voulez installer.\n"
+"\n"
+" * « Environnement graphique »: ce groupe vous permettra de determiner quel\n"
+"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
+"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
+"\n"
+"En plaçant votre souris au dessus d'un nom de groupe, vous verrez\n"
+"apparaître une courte description de ce groupe. Si vous deselectionnez tous\n"
+"les groupes lors d'une installation standard (par opposition à une mise à\n"
+"jour), un dialogue apparaîtra proposant differentes options pour une\n"
+"installation minimale :\n"
+"\n"
+" * « Avec X » : installe le moins de paquetages possible pour avoir un\n"
+"environnement de travail graphique ;\n"
+"\n"
+" * « Avec la documentation de base » : installe le système de base plus\n"
+"certains utilitaires de base et leur documentation. Cette installation est\n"
+"utilisable comme base pour monter un serveur ;\n"
+"\n"
+" * « Installation vraiment minimale » : installera le strict minimum\n"
+"necessaire pour obtenir un système GNU/Linux fonctionnel, en ligne de\n"
+"commande. Cette installation prends à peu près 65Mo.\n"
+"\n"
+"Vous pouvez finalement cocher l'option « Selection individuelle des\n"
+"paquetages ». Cette option est à utiliser si vous connaissez exactement le\n"
+"paquetage desire ou si vous voulez avoir le contrôle total de votre\n"
+"installation.\n"
+"\n"
+"Si vous avez demarre l'installation en mode \"mise à jour\", vous pouvez\n"
+"\"de-selectionner\" tous les groupes afin d'eviter l'installation de\n"
+"nouveaux programmes. Cette option est très utile pour restaurer un système\n"
+"defectueux."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Please be patient. This operation can take several minutes."
+msgstr ""
+"Please be patient. This operation can take several minutes."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
+"local time according to the time zone you selected. It is however possible\n"
+"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
+"hardware clock is the same as the system clock. This is useful when the\n"
+"machine is hosting another operating system like Windows.\n"
+"\n"
+"The \"Automatic time synchronization\" option will automatically regulate\n"
+"the clock by connecting to a remote time server on the Internet. In the\n"
+"list that is presented, choose a server located near you. Of course you\n"
+"must have a working Internet connection for this feature to work. It will\n"
+"actually install on your machine a time server which can be optionally used\n"
+"by other machines on your local network."
+msgstr ""
+"GNU/Linux manipule l'heure au format GMT (Greenwich Mean Time) et la\n"
+"convertit en temps local selon le fuseau horaire choisi. Il est neanmoins\n"
+"possible de desactiver cela en deselectionnant « Horloge système reglee sur\n"
+"le meridien de Greenwich » de façon à ce que l'horloge materielle soit la\n"
+"même que celle du système. Cela est particulièrement utile si la machine\n"
+"accueille un autre système d'exploitation tel que Windows.\n"
+"\n"
+"La « Synchronisation automatique » permet de regler l'heure automatiquement\n"
+"en se connectant à un serveur de temps sur Internet. Dans la liste qui est\n"
+"alors presentee, choisissez un serveur geographiquement proche de vous.\n"
+"Vous devez avoir une connexion Internet pour que cela fonctionne bien\n"
+"entendu. Cela installera en fait sur votre machine un serveur de temps\n"
+"local qui pourra optionnellement être lui-même utilise par d'autres\n"
+"machines de votre reseau local."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM and will eject the\n"
+"current CD and ask you to insert a different one as required."
+msgstr ""
+"Les paquetages requis à l'installation de Mandrake Linux sont distribues\n"
+"sur plusieurs CDROM. Heureusement, DrakX connaît l'emplacement de chacun\n"
+"des paquetages. Il ejectera celui present dans le lecteur et vous demandera\n"
+"d'inserer le CDROM approprie, selon le cas."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"root\" is the system\n"
+"administrator and is the only one authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
+"easy to compromise a system.\n"
+"\n"
+"However, please do not make the password too long or complicated because\n"
+"you must be able to remember it without too much effort.\n"
+"\n"
+"The password will not be displayed on screen as you type it in. Hence, you\n"
+"will have to type the password twice to reduce the chance of a typing\n"
+"error. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will have to be used the first time you connect.\n"
+"\n"
+"In Expert mode, you will be asked if you will be connecting to an\n"
+"authentication server, like NIS or LDAP.\n"
+"\n"
+"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
+"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
+"network administrator.\n"
+"\n"
+"If your computer is not connected to any administrated network, you will\n"
+"want to choose \"Local files\" for authentication."
+msgstr ""
+"Vous avez à prendre ici une decision cruciale pour la securite de votre\n"
+"système. L'utilisateur « root » est l'administrateur du système qui a tous\n"
+"les droits d'accès aux fichiers de configuration, etc. Il est donc\n"
+"imperatif de choisir un mot de passe difficile à deviner (pensez aux\n"
+"systèmes prevus à cet effet qui anticipent les combinaisons communes des\n"
+"utilisateurs). DrakX vous avertira si le mot de passe entre est trop facile\n"
+"à deviner. Comme vous pouvez le voir, il est egalement possible de ne pas\n"
+"entrer de mot de passe. Nous deconseillons fortement cette pratique. Comme\n"
+"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
+"detruire sur votre système, c'est pourquoi le mot de passe doit agir comme\n"
+"barrière à l'entree.\n"
+"\n"
+"Le mot de passe choisi devrait contenir au moins 8 caractères\n"
+"alphanumeriques. Ne jamais ecrire un mot de passe, forcez-vous à vous en\n"
+"souvenir par coeur. Il faut donc menager accessibilite et memoire, donc un\n"
+"mot de passe de 30 caractères est presque impossible à memoriser.\n"
+"\n"
+"Afin d'eviter les regards indiscrets, le mot de passe n'apparaîtra pas à\n"
+"l'ecran. Il vous faudra donc l'inscrire deux fois afin d'eviter les erreurs\n"
+"de frappe. Évidemment, si vous faites deux fois la même erreur, celle-ci\n"
+"sera sauvegardee et vous devrez la reproduire afin d'acceder à votre\n"
+"système pour la première fois.\n"
+"\n"
+"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
+"serveur d'authentification, tel que NIS ou LDAP. Si votre reseau utilise un\n"
+"de ces protocoles, il faut le selectionner. Si vous n'en avez aucune idee,\n"
+"demandez à votre administrateur de reseau.\n"
+"\n"
+"Si votre ordinateur n'est pas connecte sur un reseau administre, vous devez\n"
+"choisir « Fichiers Locaux » pour l'authentification."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Before continuing, you should read carefully the terms of the license. It\n"
+"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
+"all the terms in it, click on the \"Refuse\" button which will immediately\n"
+"terminate the installation. To continue with the installation, click on the\n"
+"\"Accept\" button."
+msgstr ""
+"Avant d'aller plus loin, il est fortement recommande de lire attentivement\n"
+"les termes et conditions d'utilisations de la licence. Celle-ci regit\n"
+"l'ensemble de la distribution Mandrake Linux. Si, pour une raison ou une\n"
+"autre, vous n'acceptez pas ces conditions, cliquez sur « Refuser ».\n"
+"L'installation sera alors immediatement interrompue. Pour continuer,\n"
+"cliquez sur « Accepter »."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installations. If you make any changes, you must at least define a root\n"
+"partition (\"/\"). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for \"/home\"\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installs. If you make any changes, you must at least define a root\n"
+"partition (« / »). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for « /home »\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Click on \"OK\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Click on « OK » if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on « OK », you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on « Cancel » to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
+"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
+"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
+"should come back to this step for help in at least two situations:\n"
+"\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
+"of your main disk (unless you are using another boot manager), to allow you\n"
+"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
+"your system). If you need to reinstall Windows, the Microsoft install\n"
+"process will rewrite the boot sector, and then you will not be able to\n"
+"start GNU/Linux!\n"
+"\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
+"contains a fair number of system tools for restoring a system, which has\n"
+"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
+"password, or any other reason.\n"
+"\n"
+"When you click on this step, you will be asked to enter a disk inside the\n"
+"drive. The floppy disk you will insert must be empty or contain data which\n"
+"you do not need. You will not have to format it since DrakX will rewrite\n"
+"the whole disk."
+msgstr ""
+"Le CDROM d'installation de Mandrake Linux a un mode de recuperation\n"
+"predefini. Vous pouvez y acceder en demarrant l'ordinateur sur le CDROM.\n"
+"Selon la version de votre « BIOS », il faut lui specifier de demarrer sur\n"
+"le CDROM. Vous devriez revenir au disquette de demarrage dans deux cas\n"
+"precis :\n"
+"\n"
+" * Au moment d'installer le « Programme d'amorce », DrakX va reecrire sur\n"
+"le secteur (MBR) contenant le programme d'amorce (boot loader) afin de vous\n"
+"permettre de demarrer avec Linux ou Windows (en prenant pour acquis que\n"
+"vous avez deux systèmes d'exploitation installes. Si vous reinstallez\n"
+"Windows, celui-ci va reecrire sur le MBR et il vous sera desormais\n"
+"impossible de demarrer Linux.\n"
+"\n"
+" * Si un problème survient et qu'il vous est impossible de demarrer\n"
+"GNU/Linux à partir du disque dur, cette disquette deviendra votre seul\n"
+"moyen de demarrer votre système Linux. Elle contient un bon nombre d'outils\n"
+"pour recuperer un système defectueux, peu importe la source du problème.\n"
+"\n"
+"En cliquant sur cette etape, on vous demandera d'inserer une disquette. La\n"
+"disquette inseree sera complètement effacee et DrakX se chargera de la\n"
+"formater et d'y inserer les fichiers necessaires."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Finally, depending on whether or not you selected individual packages, you\n"
+"will be presented a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right. When your selection is finished, click the \"Install\" button which\n"
+"will then launch the installation process. Depending on the speed of your\n"
+"hardware and the number of packages that need to be installed, it may take\n"
+"a while to complete the process. An estimate of the time it will take to\n"
+"install everything is displayed on the screen, to help you gauge if there\n"
+"is sufficient time to enjoy a cup of coffee.\n"
+"\n"
+"!! If a server package has been selected, either intentionally or because\n"
+"it was part of a whole group, you will be asked to confirm that you really\n"
+"want those servers to be installed. Under Mandrake Linux, any installed\n"
+"servers are started by default at boot time. Even if they are safe and have\n"
+"no known issues at the time the distribution was shipped, it may happen\n"
+"that security holes are discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default. !!\n"
+"\n"
+"The \"Automatic dependencies\" option simply disables the warning dialog\n"
+"which appears whenever the installer automatically selects a package. This\n"
+"occurs because it has determined that it needs to satisfy a dependency with\n"
+"another package in order to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows to load the\n"
+"package list chosen during a previous installation. Clicking on this icon\n"
+"will ask you to insert a floppy disk previously created at the end of\n"
+"another installation. See the second tip of last step on how to create such\n"
+"a floppy."
+msgstr ""
+"Finalement, si vous avez choisi de selectionner individuellement les\n"
+"paquetages à installer, DrakX vous presentera un arbre contenant tous les\n"
+"paquetages, classes par groupes et sous-groupes. En naviguant à travers\n"
+"l'arbre, vous pouvez selectionner des groupes, des sous-groupes ou des\n"
+"paquetages individuels.\n"
+"\n"
+"Dès que vous selectionnez un paquetage dans l'arbre, une descriptions\n"
+"apparaît à droite. Une fois votre selection completee, cliquez sur\n"
+"« Installation » pour lancer le processus. Soyez patient, car en fonction\n"
+"du type d'installation choisi ou du nombre de paquetages selectionnes, le\n"
+"temps requis peut être substantiellement different. Une estimation du temps\n"
+"requis est presentee sur l'ecran en cours d'operation afin de vous\n"
+"permettre d'evaluer de combien de temps vous disposez pour prendre votre\n"
+"dejeuner.\n"
+"\n"
+"!! Si un logiciel serveur a ete selectionne, vous devrez confirmer que vous\n"
+"voulez vraiment que celui-ci soit installe. Sous Mandrake, par defaut, tous\n"
+"les serveurs installes sont lances au demarrage. Malgre tous les efforts\n"
+"investis pour vous livrer une distribution Linux securitaire, il est\n"
+"possible que certaines failles de securite affectes les serveurs installes\n"
+"au-delà de la date de publication. Si vous ne savez pas precisement à quoi\n"
+"sert un serveur en particulier ou pourquoi il est installe, cliquez sur\n"
+"« NON ». En cliquant sur « OUI », le serveur sera installe et le service\n"
+"rendu disponible au demarrage. !!\n"
+"\n"
+"L'option « Dependances automatiques » desactive les avertissements qui\n"
+"apparaissent à chaque fois que l'installeur selectionne un nouveau paquet.\n"
+"Ces avertissements surviennent parce que DrakX a determine que pour qu'un\n"
+"paquetage soit fonctionnel, il lui en faut un autre dont il est dependant.\n"
+"\n"
+"La petite icône de disquette qui apparaît au bas de la liste permet de\n"
+"recuperer une liste de paquetages selectionnes durant une autre\n"
+"installation. En cliquant dessus, on vous demandera d'inserer la disquette\n"
+"creee lors d'une installation precedente. Voir la deuxième note de la\n"
+"dernière etape afin de savoir comment creer une telle disquette."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a filesystem).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"any of it.\n"
+"\n"
+"Click on \"OK\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"Cancel\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
+"for bad blocks on the disk."
+msgstr ""
+"Chaque partition nouvellement definie doit être formatee, c'est à dire\n"
+"qu'un système de fichier (filesystem) doit y être cree.\n"
+"\n"
+"Durant cette etape, vous pouvez egalement choisir de reformater d'autres\n"
+"partitions existantes afin d'effacer les donnees qu'elles contiennent. Si\n"
+"c'est ce que vous desirez, il faut egalement choisir ces partitions.\n"
+"\n"
+"Sachez qu'il n'est pas necessaire de reformater toutes les partitions\n"
+"existantes. Vous devez reformater les partitions contenant le système\n"
+"d'exploitation, (tel que : « / », « /usr » ou « /var ») mais vous n'avez\n"
+"pas à reformater les partitions de donnees que vous voulez garder,\n"
+"habituellement « /home ».\n"
+"\n"
+"Restez prudent au moment de selectionner les partitions. Une fois formatee,\n"
+"toutes les donnees contenues sur les partitions selectionnees seront\n"
+"detruites et il sera impossible de les recuperer.\n"
+"\n"
+"Cliquez sur « OK » lorsque vous être prêt à formater vos partitions.\n"
+"\n"
+"Cliquez sur « Annuler » si vous voulez choisir d'autres partitions pour\n"
+"votre installation.\n"
+"\n"
+"Cliquez sur « Avance », si vous desirez choisir les partitions qui seront\n"
+"verifiees pour des secteurs corrompus."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"Normally, DrakX selects the right keyboard for you (depending on the\n"
+"language you have chosen) and you won't even see this step. However, you\n"
+"might not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may still want\n"
+"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
+"located in Quebec, you may find yourself in the same situation. In both\n"
+"cases, you will have to go back to this installation step and select an\n"
+"appropriate keyboard from the list.\n"
+"\n"
+"Click on the \"More\" button to be presented with the complete list of\n"
+"supported keyboards."
+msgstr ""
+"Normalement, DrakX selectionne le clavier approprie en fonction de la\n"
+"langue choisie et vous ne devriez pas voir cette etape. Cela dit, il est\n"
+"possible que vous ayez un clavier ne correspondant pas exactement à votre\n"
+"langue d'utilisation. Par exemple, si vous habitez le Quebec et parlez le\n"
+"français et l'anglais, vous pouvez vouloir avoir votre clavier anglais pour\n"
+"les tâches d'administration système et votre clavier français pour ecrire\n"
+"de la poesie. Dans ces cas, il vous faudra revenir à cette etape\n"
+"d'installation et selectionner un autre clavier à partir de la liste.\n"
+"\n"
+"Vous n'avez qu'a choisir la disposition de clavier qui vous convient.\n"
+"\n"
+"Cliquez sur « Davantage » pour voir toutes les options proposees."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of drive\n"
+"(MBR)\"."
+msgstr ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose « First sector of drive\n"
+"(MBR) »."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"OK\" to reboot the system. You can start\n"
+"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
+"soon as the computer has booted up again.\n"
+"\n"
+"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"\n"
+" * \"generate auto-install floppy\": to create an installation floppy disk\n"
+"which will automatically perform a whole installation without the help of\n"
+"an operator, similar to the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"Replay\". This is a partially automated installation as the\n"
+"partitioning step (and only this one) remains interactive;\n"
+"\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a great number of similar\n"
+"machines. See the Auto install section on our web site;\n"
+"\n"
+" * \"Save packages selection\"(*): saves the package selection as done\n"
+"previously. Then, when doing another installation, insert the floppy inside\n"
+"the drive and run the installation going to the help screen by pressing on\n"
+"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Votre installation de Mandrake Linux est maintenant terminee et votre\n"
+"système est prêt à être utilise. Cliquez sur « OK » pour redemarrer votre\n"
+"système. Vous aurez alors le choix de demarrer GNU/Linux ou Windows (s'il\n"
+"est present).\n"
+"\n"
+"Le bouton « Avancee » (en mode Expert uniquement) permet deux autres\n"
+"options :\n"
+"\n"
+" * « Generer une disquette d'auto-install »: Pour creer une disquette\n"
+"d'installation qui permettra de reproduire l'installation que vous venez de\n"
+"realiser sans l'aide d'un administrateur.\n"
+"\n"
+"   Notez que les deux options suivantes apparaissent après avoir clique sur\n"
+"le bouton :\n"
+"\n"
+"    * « Replay ». C'est une installation partiellement automatique où il\n"
+"est possible de personnaliser le partitionnement du disque (exclusivement).\n"
+"\n"
+"    * « Automatique ». Complètement automatique, cette installation\n"
+"reformate le disque au complet.\n"
+"\n"
+"   Cette fonctionnalite est particulièrement pratique pour l'installation\n"
+"de multiples systèmes. Voir la sectionAuto install de notre site Web.\n"
+"\n"
+" * « Sauvegarder les paquetages selectionnes » (*) sauve la selection des\n"
+"paquetages installes. Puis, lorsque vous ferez une autre installation,\n"
+"inserer la disquette dans le lecteur et acceder au menu d'aide en tapant\n"
+"[f1], et entrez la commande suivante : « linux defcfg=\"floppy\" ».\n"
+"\n"
+"(*) Vous avez besoin d'une disquette formatee avec FAT (pour la creer sous\n"
+"Linux, tapez « mformat a: »)"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"DrakX now detects any IDE device present in your computer. It will also\n"
+"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection does not always detect a piece of hardware,\n"
+"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
+"if you know that there is a SCSI card installed in your machine. You will\n"
+"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
+"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
+"detected in your machine by selecting \"See hardware info\" and clicking\n"
+"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
+"return to the SCSI interface question.\n"
+"\n"
+"If you have to manually specify your adapter, DrakX will ask if you want to\n"
+"specify options for it. You should allow DrakX to probe the hardware for\n"
+"the card-specific options which the hardware needs to initialize. This\n"
+"usually works well.\n"
+"\n"
+"If DrakX is not able to probe for the options which need to be passed, you\n"
+"will need to provide options to the driver manually. Please review the\n"
+"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
+"Hardware'' section) for hints on retrieving the parameters required from\n"
+"hardware documentation, from the manufacturer's web site (if you have\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
+"Windows on your system)."
+msgstr ""
+"DrakX detecte maintenant tous les peripheriques IDE presents sur votre\n"
+"système. Également, DrakX recherchera les peripheriques SCSI. Finalement,\n"
+"selon les composantes detectees, DrakX installera tous les pilotes\n"
+"necessaires à son fonctionnement.\n"
+"\n"
+"Compte tenu de la vaste gamme de peripheriques disponibles sur le marche,\n"
+"dans certain cas la detection de materiel ne fonctionnera pas. Dans ce cas,\n"
+"DrakX vous demandera de confirmer si des composantes SCSI sont presentes\n"
+"sur votre système. Cliquez sur « Oui » si vous êtes certain d'avoir un\n"
+"peripherique SCSI sur votre système. DrakX vous presentera alors une liste\n"
+"de carte SCSI disponibles. Selectionnez la vôtre. Évidement, cliquez sur\n"
+"« Non », si vous n'en avez pas. Si vous n'êtes pas certain, cliquez sur\n"
+"« Voir les informations sur le materiel », puis sur « OK ». Verifiez la\n"
+"liste du materiel, puis cliquez sur « OK » pour retourner à la question\n"
+"concernant les peripheriques SCSI.\n"
+"\n"
+"Si vous devez specifier votre carte SCSI manuellement, DrakX vous demandera\n"
+"de confirmer les options du peripherique. Vous devriez permettre à DrakX de\n"
+"verifier automatiquement votre carte pour les options necessaires à\n"
+"determiner.\n"
+"\n"
+"Il peut arriver que DrakX soit incapable de verifier les options\n"
+"necessaires. Dans ce cas, vous devrez les determiner manuellement.\n"
+"Consultez le guide d'utilisation (Chapitre 3, section \"Obtenir des\n"
+"informations sur votre materiel\") pour quelques astuces pour retrouver les\n"
+"paramètres necessaires dans la documentation de vos peripheriques, sur le\n"
+"site du fabricant (si vous avez un accès à Internet) ou à partir des menus\n"
+"de Microsoft Windows (si vous utilisiez ce peripherique avec Windows)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension;\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation;\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used;\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"Here, you can override this option;\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support;\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
+"selections."
+msgstr ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OS's, the entry consists only of a label and the root partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the « root » device or \"/\" for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"   \n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used.\n"
+"\n"
+" * Read-write: normally the « root » partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes \"live\".\n"
+"Here, you can override this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in \"novideo\" mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
+"selections."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive;\n"
+"\n"
+" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
+"and swap partitions in free space of your hard drive;\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
+"\n"
+"    * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk;\n"
+"\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
+"\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
+"\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning;\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes;\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
+"\n"
+" * \"Done\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the ext2fs chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"At this point, you need to choose what partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have been already\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * « Clear all »: this option deletes all partitions on the selected hard\n"
+"drive.\n"
+"\n"
+" * « Auto allocate »: this option allows you to automatically create Ext2\n"
+"and swap partitions in free space of your hard drive.\n"
+"\n"
+" * « Rescue partition table »: if your partition table is damaged, you can\n"
+"try to recover it using this option. Please be careful and remember that it\n"
+"can fail.\n"
+"\n"
+" * « Undo »: use this option to cancel your changes.\n"
+"\n"
+" * « Reload »: you can use this option if you wish to undo all changes and\n"
+"load your initial partitions table.\n"
+"\n"
+" * « Assistant »: use this option if you wish to use a assistant to\n"
+"partition your hard drive. This is recommended if you do not have a good\n"
+"knowledge of partitioning.\n"
+"\n"
+" * « Restore from floppy »: this option will allow you to restore a\n"
+"previously saved partition table from floppy disk.\n"
+"\n"
+" * « Save to floppy »: saves the partition table to a floppy. Useful for\n"
+"later partition-table recovery if necessary. It is strongly recommended to\n"
+"perform this step.\n"
+"\n"
+" * « Done »: when you have finished partitioning your hard drive, this will\n"
+"save your changes back to disc.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
+"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+
diff --git a/perl-install/share/po/help-it.pot b/perl-install/share/po/help-it.pot
new file mode 100644
index 000000000..6fd5a0be5
--- /dev/null
+++ b/perl-install/share/po/help-it.pot
@@ -0,0 +1,1926 @@
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
+"either GNU/Linux or any other operating system present on your computer.\n"
+"Normally, these other operating systems are correctly detected and\n"
+"installed. If this is not the case, you can add an entry by hand in this\n"
+"screen. Be careful to choose the correct parameters.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone. In which case, you can delete the corresponding entries. But then,\n"
+"you will need a boot disk in order to boot those other operating systems!"
+msgstr ""
+"LILO (il LInux LOader) e GRUB sono bootloader: sono in grado di caricare\n"
+"indifferentemente GNU/Linux o altri sistemi operativi presenti sul vostro\n"
+"computer. Normalmente, questi sistemi operativi sono correttamente rilevati\n"
+"e installati. Se non avviene, potete aggiungere una voce a mano in questo\n"
+"schermo. State attenti a scegliere i parametri corretti.\n"
+"\n"
+"Potreste anche non voler dare l'accesso a questi sistemi operativi a\n"
+"chiunque, nel qual caso potete cancellare le voci corrispondenti, ma in\n"
+"questo caso avrete bisogno di un boot disk per caricarli!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Please choose your preferred language for installation and system usage.\n"
+"\n"
+"Clicking on the \"Advanced\" button will allow you to select other\n"
+"languages to be installed on your workstation. Selecting other languages\n"
+"will install the language-specific files for system documentation and\n"
+"applications. For example, if you will host users from Spain on your\n"
+"machine, select English as the main language in the tree view and in the\n"
+"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
+"\n"
+"Note that multiple languages may be installed. Once you have selected any\n"
+"additional locales, click the \"OK\" button to continue."
+msgstr ""
+"Scegliete la lingua che intendete usare per l'installazione e l'uso del\n"
+"sistema.\n"
+"\n"
+"Cliccando sul pulsante \"Avanzato\" potrete scegliere altre lingue da\n"
+"installare sul vostro computer. La selezione di altre lingue comporta\n"
+"l'installazione dei file relativi alla documentazione e alle applicazioni\n"
+"per ciascuna di esse. Se il vostro computer dovrà essere usato, ad esempio,\n"
+"anche da persone di madre lingua spagnola, potete scegliere l'italiano come\n"
+"lingua principale nella struttura ad albero e, nella sezione \"Avanzato\",\n"
+"apporre un segno di spunta sul pulsante grigio corrispondente a\n"
+"\"Spanish|Spain\".\n"
+"\n"
+"È possibile installare i file per più lingue allo stesso tempo. Dopo aver\n"
+"scelto quelle che preferite cliccate sul pulsante \"Ok\" per continuare."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"At this point, you need to choose where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space, you will\n"
+"need to partition it. Basically, partitioning a hard drive consists of\n"
+"logically dividing it to create space to install your new Mandrake Linux\n"
+"system.\n"
+"\n"
+"Because the partitioning process' effects are usually irreversible,\n"
+"partitioning can be intimidating and stressful if you are an inexperienced\n"
+"user. Fortunately, there is a wizard which simplifies this process. Before\n"
+"beginning, please consult the manual and take your time.\n"
+"\n"
+"If you are running the installation in Expert mode, you will enter\n"
+"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
+"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
+"From the installation interface, you can use the wizards as described here\n"
+"by clicking the dialog's \"Wizard\" button.\n"
+"\n"
+"If partitions have already been defined, either from a previous\n"
+"installation or from another partitioning tool, simply select those to\n"
+"install your Linux system.\n"
+"\n"
+"If partitions are not defined, you will need to create them using the\n"
+"wizard. Depending on your hard drive configuration, several options are\n"
+"available:\n"
+"\n"
+" * \"Use free space\": this option will simply lead to an automatic\n"
+"partitioning of your blank drive(s). You will not be prompted further;\n"
+"\n"
+" * \"Use existing partition\": the wizard has detected one or more existing\n"
+"Linux partitions on your hard drive. If you want to use them, choose this\n"
+"option;\n"
+"\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
+"be performed without the loss of any data, provided you previously\n"
+"defragment the Windows partition. Backing up your data won't hurt either..\n"
+"This solution is recommended if you want to use both Mandrake Linux and\n"
+"Microsoft Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
+"\n"
+" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
+"present on your hard drive and replace them with your new Mandrake Linux\n"
+"system, choose this option. Be careful with this solution because you will\n"
+"not be able to revert your choice after you confirm;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Remove Windows\": this will simply erase everything on the drive and\n"
+"begin fresh, partitioning everything from scratch. All data on your disk\n"
+"will be lost;\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"Expert mode\": choose this option if you want to manually partition\n"
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
+msgstr ""
+"A questo punto dovete scegliere dove installare il vostro sistema operativo\n"
+"Mandrake Linux sul disco rigido. Se il vostro disco è vuoto, oppure se un\n"
+"sistema operativo esistente sta usando tutto lo spazio disponibile, allora\n"
+"dovrete partizionarlo. In breve, partizionare un disco rigido consiste nel\n"
+"suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
+"installare il vostro nuovo sistema operativo Mandrake Linux.\n"
+"\n"
+"Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
+"questa operazione può intimidire e rivelarsi stressante per un utente\n"
+"inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
+"semplifica questo passo. Prima di iniziare leggete attentamente il manuale,\n"
+"e prendete tutto il tempo che vi serve.\n"
+"\n"
+"Se state effettuando l'installazione in modalità Esperto, verrà lanciato\n"
+"DiskDrake, il programma di gestione e partizionamento dei dischi rigidi di\n"
+"Mandrake Linux, che vi permetterà di configurare accuratamente le vostre\n"
+"partizioni. Consultate il capitolo relativo a DiskDrake nel manuale. Dal\n"
+"programma di installazione potete richiamare gli assistenti descritti qui\n"
+"di seguito cliccando sul pulsante \"Assistente\" (ingl. ''Wizard'').\n"
+"\n"
+"Se le partizioni sono già state definite (per una precedente installazione,\n"
+"o da un'altra utilità di partizionamento), dovrete solo scegliere quelle da\n"
+"usare per installare il vostro sistema Linux.\n"
+"\n"
+"Se le partizioni non sono ancora state definite, dovete crearle usando\n"
+"l'assistente. In base alla configurazione del vostro disco rigido, saranno\n"
+"disponibili diverse soluzioni:\n"
+"\n"
+" * \"Usa spazio disponibile\": questa opzione causerà un partizionamento\n"
+"automatico del vostro disco rigido (o dischi, se ne avete più di uno). Non\n"
+"vi verrà posta nessun'altra domanda.\n"
+"\n"
+" * \"Usa partizioni esistenti\": l'assistente ha trovato una o più\n"
+"partizioni Linux sul vostro disco rigido. Se desiderate usarle scegliete\n"
+"questa opzione.\n"
+"\n"
+" * \"Usa lo spazio libero nella partizione Windows\": se Microsoft Windows\n"
+"è installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
+"dovrete creare spazio libero per i dati relativi a Linux. Per farlo potete\n"
+"cancellare la vostra partizione Microsoft Windows e i dati che contiene\n"
+"(usando le soluzioni \"Cancella l'intero disco\" o \"Modo Esperto\"),\n"
+"oppure ridimensionarla. Il ridimensionamento può essere effettuato evitando\n"
+"la perdita di dati a patto che prima di procedere la partizione Windows sia\n"
+"stata deframmentata. Vi raccomandiamo anche di fare un backup dei vostri\n"
+"dati. Questa è la soluzione consigliata se desiderate usare sia Mandrake\n"
+"Linux sia Microsoft Windows sullo stesso computer.\n"
+"\n"
+"   Prima di scegliere questa opzione, tenete presente che la dimensione\n"
+"della partizione su cui risiede Microsoft Windows sarà ridotta rispetto a\n"
+"quella attuale. Significa che avrete meno spazio libero per archiviare i\n"
+"vostri dati o installare nuovo software su Windows.\n"
+"\n"
+" * \"Cancella l'intero disco\": se desiderate cancellare tutti i dati e\n"
+"tutte le partizioni presenti sul vostro disco rigido e rimpiazzarli con il\n"
+"vostro nuovo sistema Mandrake Linux, potete selezionare questa opzione.\n"
+"Fate attenzione nello scegliere questa soluzione, dopo la conferma non\n"
+"potrete più tornare indietro.\n"
+"\n"
+"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
+"persi. !!\n"
+"\n"
+" * \"Cancella Windows\": l'effetto di questa opzione sarà di cancellare\n"
+"tutto quello che si trova sul disco e di ricominciare da capo, creando le\n"
+"partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
+"andranno persi.\n"
+"\n"
+"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
+"persi. !!\n"
+"\n"
+" * \"Modo Esperto\": se volete partizionare manualmente il vostro disco\n"
+"rigido potete scegliere questa opzione. Fate attenzione prima di optare per\n"
+"questa soluzione: è potente, ma molto pericolosa. Potreste facilmente\n"
+"causare la perdita di tutti i vostri dati. Quindi, non scegliete questa\n"
+"soluzione se non sapete cosa state facendo."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
+"will try to configure X automatically.\n"
+"\n"
+"It is extremely rare for it to fail, unless the hardware is very old (or\n"
+"very new). If it succeeds, it will start X automatically with the best\n"
+"resolution possible, depending on the size of the monitor. A window will\n"
+"then appear and ask you if you can see it.\n"
+"\n"
+"If you are doing an \"Expert\" installation, you will enter the X\n"
+"configuration wizard. See the corresponding section of the manual for more\n"
+"information about this wizard.\n"
+"\n"
+"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
+"will proceed to the next step. If you cannot see the message, it simply\n"
+"means that the configuration was wrong and the test will automatically end\n"
+"after 10 seconds, restoring the screen."
+msgstr ""
+"X (che sta per ''X Window System'') è il cuore dell'interfaccia grafica di\n"
+"GNU/Linux, sulla quale sono basati tutti gli ambienti grafici che sono\n"
+"inclusi in Mandrake Linux (KDE, GNOME, AfterStep, WindowMaker, etc.). In\n"
+"questa sezione, DrakX tenterà di configurare X automaticamente.\n"
+"\n"
+"È molto raro che non abbia successo: l'unico caso in cui ciò potrebbe\n"
+"accadere è se l'hardware in questione è molto vecchio (o molto recente). Se\n"
+"l'operazione riesce, DrakX lancerà X automaticamente, con la miglior\n"
+"risoluzione possibile, in base alle dimensioni del monitor. A quel punto,\n"
+"comparirà una finestra che vi chiederà se potete vederla.\n"
+"\n"
+"Se state effettuando un'installazione in modo \"Esperto\", verrà lanciato\n"
+"l'assistente di configurazione di X. Consultate la sezione del manuale\n"
+"dedicata a questo assistente per avere più informazioni al riguardo.\n"
+"\n"
+"Se potete vedere il messaggio e rispondete \"Sì\", allora DrakX passerà\n"
+"alla fase successiva. Se non potete vedere il messaggio, significa che la\n"
+"configurazione non andava bene, e il test terminerà automaticamente dopo 10\n"
+"secondi, riportandovi alla schermata precedente."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Your new Mandrake Linux operating system is currently being installed.\n"
+"Depending on the number of packages you will be installing and the speed of\n"
+"your computer, this operation could take from a few minutes to a\n"
+"significant amount of time.\n"
+"\n"
+"Please be patient."
+msgstr ""
+"Il vostro sistema operativo Mandrake Linux è in corso d'installazione. In\n"
+"base al numero di pacchetti che devono essere installati e alla velocità\n"
+"del vostro computer, questa operazione potrebbe durare pochi minuti o\n"
+"richiedere un tempo molto lungo.\n"
+"\n"
+"Abbiate pazienza, per favore."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"Scegliete il disco rigido che volete cancellare per poter installare la\n"
+"nuova partizione per Mandrake Linux. Attenzione! tutti i dati presenti\n"
+"andranno perduti e non saranno più recuperabili!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"GNU/Linux is a multiuser system, and this means that each user can have his\n"
+"own preferences, his own files and so on. You can read the ``User Guide''\n"
+"to learn more. But unlike \"root\", which is the administrator, the users\n"
+"you will add here will not be entitled to change anything except their own\n"
+"files and their own configuration. You will have to create at least one\n"
+"regular user for yourself. That account is where you should log in for\n"
+"routine use. Although it is very practical to log in as \"root\" everyday,\n"
+"it may also be very dangerous! The slightest mistake could mean that your\n"
+"system would not work any more. If you make a serious mistake as a regular\n"
+"user, you may only lose some information, but not the entire system.\n"
+"\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
+"as you can actually enter whatever you want. DrakX will then take the first\n"
+"word you have entered in the box and will bring it over to the \"User\n"
+"name\". This is the name this particular user will use to log onto the\n"
+"system. You can change it. You then have to enter a password here. A\n"
+"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
+"from a security point of view, but that is no reason to neglect it: after\n"
+"all, your files are at risk.\n"
+"\n"
+"If you click on \"Accept user\", you can then add as many as you want. Add\n"
+"a user for each one of your friends: your father or your sister, for\n"
+"example. When you finish adding all the users you want, select \"Done\".\n"
+"\n"
+"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
+"for that user (bash by default)."
+msgstr ""
+"GNU/Linux è un sistema operativo multiutente, e questo significa che\n"
+"ciascun utente può disporre di una configurazione personalizzata, di uno\n"
+"spazio per i propri file, e così via; consultate il ''Manuale dell'utente''\n"
+"per saperne di più. Ma, a differenza di \"root\", che è l'amministratore\n"
+"del sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
+"cambiare nulla, se non i propri file e la propria configurazione. Dovrete\n"
+"crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
+"quotidiano: per quanto sia molto comodo entrare nel sistema come \"root\"\n"
+"tutti i giorni, potrebbe anche essere molto pericoloso! Anche un errore\n"
+"banale potrebbe significare un sistema non più in grado di funzionare\n"
+"correttamente. Se, invece, commettete un errore, anche grave, in qualità di\n"
+"utente normale, potreste perdere parte dei vostri dati, ma non\n"
+"compromettere l'intero sistema.\n"
+"\n"
+"Prima di tutto, inserite il vostro nome reale. Naturalmente questo non è\n"
+"obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
+"prenderà la prima parola che avete inserito nel campo di testo e la copierà\n"
+"alla voce \"Nome utente\". Questo è il nome che l'utente dovrà usare per\n"
+"accedere al sistema, ma potete cambiarlo. Poi digitate una password per\n"
+"questo utente. La password di un utente non privilegiato dal punto di vista\n"
+"della sicurezza non è cruciale come quella di \"root\", ovviamente, ma non\n"
+"c'è motivo di essere frettolosi: dopo tutto, si tratta dei vostri file.\n"
+"\n"
+"Se cliccate su \"Accetta utente\", potrete poi aggiungerne un altro, e\n"
+"altri ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei\n"
+"vostri amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo\n"
+"aver aggiunto tutti gli utenti che volete, selezionate \"Fatto\".\n"
+"\n"
+"Cliccando sul pulsante \"Avanzato\" potrete cambiare la \"shell\" per\n"
+"quell'utente (come opzione predefinita è bash)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Finally, you will be asked whether you want to see the graphical interface\n"
+"at boot. Note this question will be asked even if you chose not to test the\n"
+"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
+"act as a server, or if you were not successful in getting the display\n"
+"configured."
+msgstr ""
+"Infine DrakX vi chiederà se desiderate utilizzare l'interfaccia grafica una\n"
+"volta terminato il processo di avvio del sistema. Notate che questa domanda\n"
+"verrà fatta anche se avete deciso di non provare la configurazione.\n"
+"Ovviamente dovrete scegliere \"No\" se la vostra macchina dovrà svolgere il\n"
+"ruolo di server, o se non siete riusciti a ottenere una configurazione\n"
+"corretta."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful to\n"
+"choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt;\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information;\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt;\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
+"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
+"these other operating systems are correctly detected and installed. If this\n"
+"is not the case, you can add an entry by hand in this screen. Be careful as\n"
+"to choose the correct parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message that is displayed before the boot\n"
+"prompt.\n"
+"\n"
+" * Boot Device: indicate where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
+"hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux.\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected.\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose \"N\" for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"At this point, it is time to choose the security level desired for the\n"
+"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
+"the data stored in it is crucial, the higher the security level should be.\n"
+"However, a higher security level is generally obtained at the expense of\n"
+"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
+"to get more information about the meaning of these levels.\n"
+"\n"
+"If you do not know what to choose, keep the default option."
+msgstr ""
+"Ora è il momento di scegliere il livello di sicurezza desiderato per il\n"
+"vostro sistema. Come regola generale, quanto più esposta è la macchina e\n"
+"quanto più sono importanti i dati che contiene, tanto più alto dovrebbe\n"
+"essere il livello di sicurezza. Tenete presente, tuttavia, che un livello\n"
+"di sicurezza molto alto in genere viene ottenuto a spese della facilità\n"
+"d'uso. Consultate il capitolo MSEC nel ''Manuale di riferimento'' per avere\n"
+"ulteriori informazioni in merito al significato di tali livelli.\n"
+"\n"
+"Se non sapete cosa scegliere, mantenete l'opzione predefinita."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Scegliete la porta appropriata. La porta \"COM1\" sotto Windows, ad\n"
+"esempio, è chiamata \"ttyS0\" sotto GNU/Linux."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Here are presented various parameters concerning your machine. Depending on\n"
+"your installed hardware, you may - or not, see the following entries:\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary;\n"
+"\n"
+" * \"Keyboard\": check the current keyboard map configuration and click on\n"
+"the button to change that if necessary;\n"
+"\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
+"\n"
+" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"configuration wizard;\n"
+"\n"
+" * \"Sound card\": if a sound card is detected on your system, it is\n"
+"displayed here. No modification possible at installation time;\n"
+"\n"
+" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+"here. No modification possible at installation time;\n"
+"\n"
+" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
+"displayed here. You can click on the button to change the parameters\n"
+"associated with it."
+msgstr ""
+"Qui sono riportati vari parametri relativi al vostro sistema. In base\n"
+"all'hardware installato, potrebbero essere visualizzate le seguenti voci:\n"
+"\n"
+" * \"Mouse\": controllate la configurazione attuale del mouse, e cliccate\n"
+"sul pulsante per cambiarla, se necessario;\n"
+"\n"
+" * \"Tastiera\": controllate l'attuale impostazione della tastiera, e\n"
+"cliccate sul pulsante per cambiarla, se necessario;\n"
+"\n"
+" * \"Fuso orario\": DrakX, come opzione predefinita, deduce il vostro fuso\n"
+"orario dalla lingua che avete scelto. Ma anche in questo caso, come per la\n"
+"scelta della tastiera, potreste non trovarvi nella nazione cui corrisponde\n"
+"la lingua che avete scelto; in tal caso sarà necessario cliccare su questo\n"
+"pulsante per poter configurare il fuso orario in base a quello dell'area\n"
+"geografica in cui vivete;\n"
+"\n"
+" * \"Stampante\": cliccando sul pulsante \"Nessuna stampante\" si\n"
+"richiamerà l'assistente di configurazione della stampante;\n"
+"\n"
+" * \"Scheda audio\": se sul vostro sistema è stata individuata una scheda\n"
+"audio, verrà mostrata qui. Al momento dell'installazione non è possibile\n"
+"apportare alcuna modifica;\n"
+"\n"
+" * \"Scheda TV\": se sul vostro sistema è stata individuata una scheda TV,\n"
+"verrà mostrata qui. Al momento dell'installazione non è possibile apportare\n"
+"alcuna modifica;\n"
+"\n"
+" * \"Scheda ISDN\": se sul vostro sistema è stata individuata una scheda\n"
+"ISDN, verrà mostrata qui. Potete cliccare sul pulsante relativo per\n"
+"cambiarne i parametri."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
+"installation or if you want to have greater control (\"Expert\"). You can\n"
+"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
+"system:\n"
+"\n"
+" * \"Install\": completely wipes out the old system. In fact, depending on\n"
+"what currently holds your machine, you will be able to keep some old (Linux\n"
+"or other) partitions unchanged;\n"
+"\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
+"\n"
+" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
+"existing Mandrake Linux system while keeping all system configurations\n"
+"unchanged. Adding new packages to the current installation is also\n"
+"possible.\n"
+"\n"
+"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
+"release.\n"
+"\n"
+"Depending on your knowledge of GNU/Linux, select one of the following\n"
+"choices:\n"
+"\n"
+" * Recommended: choose this if you have never installed a GNU/Linux\n"
+"operating system. The installation will be very easy and you will only be\n"
+"asked a few questions;\n"
+"\n"
+" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
+"installation class. The expert installation will allow you to perform a\n"
+"highly-customized installation. Answering some of the questions can be\n"
+"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
+"choose this unless you know what you are doing."
+msgstr ""
+"A questo punto DrakX deve sapere se intendete effettuare un'installazione\n"
+"in modalità predefinita (\"Raccomandata\") o se preferite avere un maggior\n"
+"controllo su di essa (\"Esperto\"). Inoltre potete scegliere se effettuare\n"
+"una nuova installazione o un aggiornamento di un sistema Mandrake Linux\n"
+"esistente:\n"
+"\n"
+" * \"Installazione\" Cancella completamente il vecchio sistema. A seconda\n"
+"di come è strutturato il sistema preesistente potrete mantenere inalterate\n"
+"alcune delle vecchie partizioni (Linux e altre).\n"
+"\n"
+" * \"Aggiornamento\" Questo tipo di installazione vi permette di effettuare\n"
+"un semplice aggiornamento dei pacchetti installati sul vostro sistema\n"
+"Mandrake Linux. Conserva tutte le partizioni attuali del disco rigido, come\n"
+"pure le configurazioni individuali degli utenti. Tutti gli altri passi\n"
+"relativi alla configurazione verranno effettuati come per una installazione\n"
+"da zero.\n"
+"\n"
+" * \"Solo aggiornamento pacchetti\" Questa nuovissima opzione vi permette\n"
+"di aggiornare un sistema Mandrake Linux esistente lasciando intatta la\n"
+"configurazione globale del sistema. è anche possibile aggiungere nuovi\n"
+"pacchetti all'installazione corrente.\n"
+"\n"
+"Gli aggiornamenti dovrebbe svolgersi senza difficoltà per sistemi Mandrake\n"
+"Linux a partire dalla versione \"8.1\".\n"
+"\n"
+"Scegliete una delle seguenti modalità di installazione, in base alla vostra\n"
+"conoscenza di GNU/Linux:\n"
+"\n"
+" * Raccomandata: se non avete mai installato il sistema operativo\n"
+"GNU/Linux, scegliete questa modalità. L'installazione sarà molto semplice e\n"
+"vi verranno poste solo poche domande;\n"
+"\n"
+" * Esperto: se avete abbastanza familiarità con GNU/Linux potete scegliere\n"
+"questa modalità, che vi permetterà di effettuare un'installazione altamente\n"
+"personalizzata. Rispondere ad alcune delle domande che vi verranno poste\n"
+"potrebbe essere difficile se non avete una buona conoscenza di GNU/Linux,\n"
+"pertanto non fate questa scelta se non sapete bene quello che state\n"
+"facendo."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Some bugs may have\n"
+"been fixed, and security issues solved. To allow you to benefit from these\n"
+"updates, you are now proposed to download them from the Internet. Choose\n"
+"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
+"to install updated packages later.\n"
+"\n"
+"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"retrieved. Choose the one nearest you. Then a package-selection tree\n"
+"appears: review the selection, and press \"Install\" to retrieve and\n"
+"install the selected package(s), or \"Cancel\" to abort."
+msgstr ""
+"È molto probabile che, al momento in cui state installando Mandrake Linux,\n"
+"alcuni pacchetti siano stati aggiornati rispetto alla versione iniziale.\n"
+"Potrebbe trattarsi di un ''bug fix'', o della soluzione di problemi\n"
+"relativi alla sicurezza. Per permettervi di beneficiare di questi\n"
+"aggiornamenti vi verrà proposto di scaricare la nuova versione dei\n"
+"pacchetti usando Internet. Scegliete \"Sì\" se potete contare su una\n"
+"connessione a Internet funzionante, oppure \"No\" se preferite installare i\n"
+"pacchetti aggiornati in un secondo momento.\n"
+"\n"
+"Se scegliete \"Sì\" comparirà una lista di siti da cui è possibile\n"
+"scaricare i pacchetti aggiornati. Selezionate quello più vicino a voi. A\n"
+"questo punto comparirà una finestra di selezione pacchetti: controllate la\n"
+"lista e cliccate su \"Installa\" per scaricare e installare i pacchetti, o\n"
+"su \"Annulla\" per annullare l'operazione."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
+"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
+"accordingly, depending on what it finds here:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
+"OS;\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If in doubt, DrakX will display a dialog with various options.\n"
+"\n"
+" * \"Bootloader to use\": you have three choices:\n"
+"\n"
+"    * \"GRUB\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
+"interface.\n"
+"\n"
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
+"interface.\n"
+"\n"
+" * \"Boot device\": in most cases, you will not change the default\n"
+"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
+"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"\n"
+" * \"Delay before booting the default image\": when rebooting the computer,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
+"another boot entry than the default one.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
+"Linux system! Also, be sure you know what you do before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
+"options, which are reserved to the expert user.\n"
+"\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options which will be available at boot time will be displayed.\n"
+"\n"
+"If there is another operating system installed on your machine, it will\n"
+"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
+"the existing options. Select an entry and click \"Modify\" to modify or\n"
+"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
+"installation step."
+msgstr ""
+"LILO e grub sono due ''bootloader'' di GNU/Linux. Un bootloader è un\n"
+"programma per l'avvio di uno o più sistemi operativi. Questa fase, in\n"
+"genere, è del tutto automatica; DrakX, infatti, analizza il settore di boot\n"
+"del disco, e si comporta in base a quello che vi trova:\n"
+"\n"
+" * se trova un settore di boot di Windows, lo rimpiazza con un settore di\n"
+"boot di grub o LILO, in modo da permettervi di lanciare GNU/Linux o un\n"
+"altro OS;\n"
+"\n"
+" * se trova un settore di boot di grub o LILO, lo sostituisce con uno\n"
+"nuovo.\n"
+"\n"
+"In caso di dubbio, DrakX mostrerà una finestra di dialogo con varie\n"
+"opzioni:\n"
+"\n"
+" * \"Bootloader da usare\": avete tre scelte a disposizione:\n"
+"\n"
+"    * \"GRUB\": se preferite grub (menu in modo testo);\n"
+"\n"
+"    * \"LILO con menu grafico\": se preferite LILO con la sua interfaccia\n"
+"grafica;\n"
+"\n"
+"    * \"LILO con menu in modo testo\": se preferite LILO nella sua versione\n"
+"con menu in modo testo.\n"
+"\n"
+" * \"Dispositivo di boot\": nella maggior parte dei casi non sarà\n"
+"necessario cambiare le impostazioni predefinite (\"/dev/hda\"), ma, se lo\n"
+"preferite, il bootloader può essere installato sul secondo disco rigido\n"
+"(\"/dev/hdb\"), o persino su un floppy (\"/dev/fd0\");\n"
+"\n"
+" * \"Ritardo prima di avviare con l'immagine predefinita\": è il tempo\n"
+"lasciato all'utente per scegliere una voce diversa da quella predefinita\n"
+"nel menu del bootloader.\n"
+"\n"
+"!! Prestate particolare attenzione al fatto che, se scegliete di non\n"
+"installare un bootloader (scegliendo \"Annulla\" nella finestra di cui\n"
+"sopra), dovete essere sicuri di poter avviare il vostro sistema Mandrake\n"
+"Linux in altro modo! Accertatevi anche di sapere quello che fate se\n"
+"modificate qualcuna delle opzioni. !!\n"
+"\n"
+"Cliccando sul pulsante \"Avanzato\" di questa finestra avrete la\n"
+"possibilità di scegliere tra molte opzioni avanzate, riservate agli utenti\n"
+"esperti.\n"
+"\n"
+"Dopo aver configurato i parametri generali del bootloader, verrà mostra la\n"
+"lista delle opzioni disponibili al momento del boot.\n"
+"\n"
+"Se sulla vostra macchina è già installato un altro sistema operativo,\n"
+"quest'ultimo verrà automaticamente aggiunto al menu di avvio. Potete anche\n"
+"scegliere di configurare con precisione le opzioni esistenti: selezionate\n"
+"una voce e cliccate su \"Modifica\" per modificarne i parametri o\n"
+"rimuoverla; \"Aggiungi\" crea una nuova voce, mentre cliccando su \"Fatto\"\n"
+"passerete alla fase di installazione successiva."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Sul vostro disco rigido è stata individuata più di una partizione Microsoft\n"
+"Windows. Per favore, scegliete quella che deve essere ridimensionata in\n"
+"modo da poter installare il vostro nuovo sistema operativo Mandrake Linux.\n"
+"\n"
+"Ogni partizione viene elencata come segue: \"nome Linux\", \"nome Windows\"\n"
+"\"Capacità\".\n"
+"\n"
+"Il \"nome Linux\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
+"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
+"\n"
+"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
+"\"sd\" se, invece, è un disco SCSI.\n"
+"\n"
+"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
+"i dischi IDE:\n"
+"\n"
+" * \"a\" significa \"disco rigido master sul controller IDE primario\",\n"
+"\n"
+" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
+"\n"
+" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
+"\n"
+" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
+"\n"
+"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
+"più\", una \"b\" significa \"ID SCSI superiore ad a\", etc.\n"
+"\n"
+"Il \"nome Windows\" è la lettera che corrisponde al vostro disco rigido\n"
+"sotto Windows (il primo disco o partizione è chiamato \"C:\")."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Here, we select a printing system for your computer. Other OSs may offer\n"
+"you one, but Mandrake Linux offers three.\n"
+"\n"
+" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+"a direct connection to your printer and you want to be able to panic out of\n"
+"printer jams, and you do not have networked printers. It will handle only\n"
+"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
+"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
+"after installation by running PrinterDrake from the Mandrake Control Center\n"
+"and clicking the expert button.\n"
+"\n"
+" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+"your local printer and also halfway-around the planet. It is simple and can\n"
+"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
+"it is compatible with the systems that went before. It can do many tricks,\n"
+"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
+"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
+"graphical front-ends for printing or choosing printer options.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
+"approximately the same things the others can do, but it will print to\n"
+"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
+"and it can print directly to shell commands. If you have need of Novell or\n"
+"printing to commands without using a separate pipe construct, use lprNG.\n"
+"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
+"networks."
+msgstr ""
+"Qui potrete scegliere il sistema di stampa da usare con questo computer.\n"
+"Altri sistemi operativi possono offrirvene uno, ma Mandrake Linux ve ne\n"
+"offre ben tre.\n"
+"\n"
+" * \"pdq\" - che sta per ''print, don't queue'' (''stampa, non mettere in\n"
+"coda''), è una buona scelta se avete una connessione diretta con la\n"
+"stampante e volete essere in grado di risolvere rapidamente eventuali\n"
+"inceppamenti della carta, e inoltre non avete altre stampanti connesse via\n"
+"rete. Infatti può gestire solo connessioni di rete molto semplici ed è\n"
+"comunque piuttosto lento in quest'ultimo caso. Scegliete \"pdq\" se questa\n"
+"è la vostra prima volta con GNU/Linux. Potrete cambiare la vostra scelta\n"
+"dopo aver terminato l'installazione lanciando PrinterDrake dal Centro di\n"
+"controllo Mandrake e cliccando sul pulsante Esperto.\n"
+"\n"
+" * \"CUPS\" - ''Common Unix Printing System'' (''Sistema di stampa\n"
+"unificato per Unix''), offre risultati eccellenti sia che dobbiate stampare\n"
+"sulla vostra stampante locale, sia nel caso che la stampa debba essere\n"
+"effettuata sull'altra faccia del pianeta. È semplice da usare e può agire\n"
+"come server o client per il vecchio sistema di stampa \"lpd\". Infatti è\n"
+"compatibile con i sistemi precedenti. Ha molte frecce al suo arco, ma la\n"
+"configurazione basica è quasi altrettanto semplice di quella per \"pdq\".\n"
+"Se avete bisogno di emulare un server \"lpd\" dovete attivare il demone\n"
+"\"cups-lpd\". Dispone di interfaccia grafica per la stampa e per la\n"
+"configurazione delle opzioni della stampante.\n"
+"\n"
+" * \"lprNG\" - ''line printer daemon New Generation'' (''demone di stampa\n"
+"di nuova generazione''. Questo sistema è approssimativamente equivalente\n"
+"agli altri, ma è anche in grado di stampare su dispositivi collegati per\n"
+"mezzo di una rete Novell, dato che supporta il protocollo IPX, e può\n"
+"stampare direttamente in base a comandi via shell. Se avete bisogno di una\n"
+"connessione di tipo Novell, o di stampare senza fare uso di pipe,\n"
+"utilizzate lprNG. In caso contrario, è preferibile usare CUPS dato che è\n"
+"più semplice e migliore nel gestire stampanti di rete."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"The first time you try the X configuration, you may not be very satisfied\n"
+"with its display (screen is too small, shifted left or right...). Hence,\n"
+"even if X starts up correctly, DrakX then asks you if the configuration\n"
+"suits you. It will also propose to change it by displaying a list of valid\n"
+"modes it could find, asking you to select one.\n"
+"\n"
+"As a last resort, if you still cannot get X to work, choose \"Change\n"
+"graphics card\", select \"Unlisted card\", and when prompted on which\n"
+"server, choose \"FBDev\". This is a failsafe option which works with any\n"
+"modern graphics card. Then choose \"Test again\" to be sure."
+msgstr ""
+"Può verificarsi il caso che il primo tentativo non sia quello giusto (lo\n"
+"schermo è troppo piccolo, spostato a destra o a sinistra...). Questo è il\n"
+"motivo per cui, anche se X viene lanciato correttamente, DrakX vi chiederà\n"
+"subito dopo se la configurazione va bene, e vi proporrà di cambiarla\n"
+"elencando una lista di modi video validi (in base a quello che ha potuto\n"
+"accertare) chiedendovi di sceglierne uno.\n"
+"\n"
+"Come ultima risorsa, se proprio non riuscite a far funzionare X, scegliete\n"
+"\"Cambia scheda grafica\", selezionate \"Unlisted card\", e quando vi verrà\n"
+"chiesto quale server desiderate utilizzare, scegliete \"FBDev\": si tratta\n"
+"di un'opzione a prova d'errore, che funziona con qualsiasi scheda grafica\n"
+"moderna. Quindi scegliete \"Nuovo test\" per essere sicuri."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"DrakX generally detects the number of buttons your mouse has. If not, it\n"
+"assumes you have a two-button mouse and will set it up for third-button\n"
+"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
+"USB mouse.\n"
+"\n"
+"If you wish to specify a different type of mouse select the appropriate\n"
+"type from the provided list.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct. If the mouse is not working well, press the space bar or [Return]\n"
+"to \"Cancel\" and choose again."
+msgstr ""
+"In genere DrakX individua automaticamente il numero di pulsanti presente\n"
+"sul vostro mouse, in caso contrario conclude che il vostro mouse è un mouse\n"
+"a due tasti e lo imposta in modo da emulare il terzo tasto. DrakX, inoltre,\n"
+"riconosce automaticamente se si tratta di un mouse PS/2, seriale o USB.\n"
+"\n"
+"Se volete specificare un diverso tipo di mouse, scegliete il vostro modello\n"
+"dall'elenco che vi viene proposto.\n"
+"\n"
+"Se scegliete un mouse diverso dal tipo predefinito, vi verrà mostrata una\n"
+"finestra dove potrete provarlo. Provate sia i pulsanti che l'eventuale\n"
+"rotellina per controllare che la configurazione sia corretta. Se il mouse\n"
+"non funziona correttamente, premete la barra spaziatrice o il tasto [Invio]\n"
+"per premere il pulsante \"Annulla\" ed effettuare una nuova scelta."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"You are now proposed to set up your Internet/network connection. If you\n"
+"wish to connect your computer to the Internet or to a local network, click\n"
+"\"OK\". The autodetection of network devices and modem will be launched. If\n"
+"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
+"may also choose not to configure the network, or do it later; in that case,\n"
+"simply click the \"Cancel\" button.\n"
+"\n"
+"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"Here, we will not detail each configuration. Simply make sure that you have\n"
+"all the parameters from your Internet Service Provider or system\n"
+"administrator.\n"
+"\n"
+"You can consult the ``User Guide'' chapter about Internet connections for\n"
+"details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection.\n"
+"\n"
+"If you wish to configure the network later after installation, or if you\n"
+"are finished configuring your network connection, click \"Cancel\"."
+msgstr ""
+"Se desiderate connettere il vostro computer a Internet o a una rete locale,\n"
+"assicuratevi di scegliere l'opzione corretta. Accendete la periferica che\n"
+"dovrete usare per connettervi prima di scegliere l'opzione adeguata, per\n"
+"permettere a DrakX di individuarla automaticamente.\n"
+"\n"
+"Mandrake Linux vi permette di configurare la vostra connessione a Internet\n"
+"durante il processo di installazione. Le connessioni disponibili sono:\n"
+"modem tradizionale, modem ISDN, connessione ADSL, cable modem, e infine una\n"
+"semplice connessione a una LAN (Ethernet).\n"
+"\n"
+"Non possiamo descrivere in dettaglio le caratteristiche di ogni\n"
+"configurazione. In ogni caso, accertatevi di avere a portata di mano tutti\n"
+"i parametri indicati dal vostro fornitore di servizi internet o dal vostro\n"
+"amministratore di sistema.\n"
+"\n"
+"Per maggiori dettagli riguardo la configurazione della connessione a\n"
+"Internet potete consultare il relativo capitolo del ''Manuale\n"
+"dell'utente''; in alternativa, potete attendere di aver portato a termine\n"
+"l'installazione e usare poi il programma descritto in tale capitolo per\n"
+"configurare la connessione.\n"
+"\n"
+"Se desiderate configurare la rete dopo aver terminato l'installazione, o se\n"
+"avete già configurato la vostra rete, cliccate su \"Annulla\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"You may now choose which services you wish to start at boot time.\n"
+"\n"
+"Here are presented all the services available with the current\n"
+"installation. Review them carefully and uncheck those which are not always\n"
+"needed at boot time.\n"
+"\n"
+"You can get a short explanatory text about a service by selecting a\n"
+"specific service. However, if you are not sure whether a service is useful\n"
+"or not, it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services which you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"A questo punto potete scegliere i servizi da lanciare automaticamente\n"
+"all'avvio del sistema.\n"
+"\n"
+"Qui sono elencati tutti i servizi disponibili con l'installazione attuale.\n"
+"Esaminateli attentamente e disabilitate quelli che non sono sempre\n"
+"necessari all'avvio.\n"
+"\n"
+"Selezionando un servizio comparirà un breve testo di aiuto che ne spiega le\n"
+"caratteristiche. Se non siete realmente sicuri dell'utilità o meno di un\n"
+"servizio, è più prudente non modificare le impostazioni predefinite.\n"
+"\n"
+"!! In questa fase dell'installazione dovete fare le vostre scelte con\n"
+"particolare attenzione nel caso intendiate usare il vostro computer come\n"
+"server: probabilmente non volete che siano abilitati servizi di cui non\n"
+"avete bisogno. Ricordate che numerosi servizi sono potenzialmente\n"
+"pericolosi se attivi su un server. Come regola generale, selezionate\n"
+"soltanto quelli di cui avete effettivamente bisogno. !!"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if your machine is to be used for programming, choose\n"
+"the desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\": installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server;\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Adesso è il momento di indicare i programmi che volete siano installati sul\n"
+"vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
+"Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
+"\n"
+"Se state effettuando un'installazione standard da CD-ROM, per prima cosa vi\n"
+"verrà chiesto di specificare quali sono i CD in vostro possesso (solo se\n"
+"siete in modalità Esperto): controllate i CD della distribuzione, cliccate\n"
+"sulle caselle corrispondenti ai CD che avete e infine sul pulsante \"Ok\"\n"
+"quando siete pronti per continuare.\n"
+"\n"
+"I pacchetti sono organizzati in gruppi corrispondenti a usi particolari\n"
+"della vostra macchina. I gruppi sono a loro volta divisi in quattro\n"
+"sezioni:\n"
+"\n"
+" * \"Workstation\": scegliete uno o più dei gruppi di questa sezione se la\n"
+"vostra macchina verrà utilizzata prevalentemente come workstation.\n"
+"\n"
+" * \"Sviluppo\": se la macchina verrà usata per lo sviluppo di software\n"
+"scegliete i gruppi appropriati.\n"
+"\n"
+" * \"Server\": se il computer sarà usato come server, qui potrete scegliere\n"
+"i servizi più comuni da installare.\n"
+"\n"
+" * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico\n"
+"preferito. Indicatene almeno uno se desiderate avere una workstation\n"
+"grafica!\n"
+"\n"
+"Spostando il puntatore del mouse sul nome di un gruppo verrà mostrato un\n"
+"breve testo di informazioni riguardo quest'ultimo. Se state effettuando\n"
+"un'installazione normale (non un aggiornamento) e deselezionate tutti i\n"
+"gruppi, comparirà una finestra di dialogo che vi proporrà alcune opzioni\n"
+"relative a un'installazione ''minima'':\n"
+"\n"
+" * \"With X\": installa i pacchetti strettamente necessari per avere un\n"
+"ambiente grafico funzionante;\n"
+"\n"
+" * \"With basic documentation\": installa il sistema base più le utilità di\n"
+"base e la relativa documentazione; questo tipo di installazione è utile se\n"
+"si vuole configurare un server;\n"
+"\n"
+" * \"Truly minimal install\": provvederà all'installazione dello stretto\n"
+"necessario per avere un sistema Linux funzionante, avente come unica\n"
+"interfaccia la linea di comando.\n"
+"\n"
+"Se lo desiderate, potete abilitare l'opzione \"Selezione individuale dei\n"
+"pacchetti\". Questa è utilissima se conoscete bene i pacchetti presenti\n"
+"nella distribuzione o se desiderate avere il totale controllo di ciò che\n"
+"verrà installato.\n"
+"\n"
+"Se avete cominciato l'installazione in modalità \"Aggiornamento\", potete\n"
+"deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, in\n"
+"questo modo effettuerete soltanto il ripristino o l'aggiornamento del\n"
+"sistema esistente."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Please be patient. This operation can take several minutes."
+msgstr ""
+"Per favore siate pazienti. Questa operazione può richiedere diversi minuti."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
+"local time according to the time zone you selected. It is however possible\n"
+"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
+"hardware clock is the same as the system clock. This is useful when the\n"
+"machine is hosting another operating system like Windows.\n"
+"\n"
+"The \"Automatic time synchronization\" option will automatically regulate\n"
+"the clock by connecting to a remote time server on the Internet. In the\n"
+"list that is presented, choose a server located near you. Of course you\n"
+"must have a working Internet connection for this feature to work. It will\n"
+"actually install on your machine a time server which can be optionally used\n"
+"by other machines on your local network."
+msgstr ""
+"GNU/Linux gestisce il tempo in base al GMT (''Greenwich Manage Time'') e lo\n"
+"traduce nell'ora locale in base al fuso orario selezionato. Tuttavia è\n"
+"possibile disabilitare questa opzione togliendo il segno di spunta alla\n"
+"casella \"Hardware clock set to GMT\", in modo che l'orologio hardware sia\n"
+"lo stesso dell'orologio di sistema. Questa scelta può tornare utile nel\n"
+"caso sulla macchina sia installato un altro sistema operativo, ad esempio\n"
+"Windows.\n"
+"\n"
+"L'opzione \"Automatic time synchronization\" provvederà a gestire l'ora\n"
+"grazie alla connessione con un server del tempo remoto via Internet.\n"
+"Scegliete un server vicino a voi nella lista che vi verrà mostrata. Perche\n"
+"questa opzione funzioni, naturalmente, dovete disporre di una connessione a\n"
+"Internet funzionante. Sulla vostra macchina verrà installato un server del\n"
+"tempo che potrà essere usato anche per altre macchine che si trovano sulla\n"
+"vostra rete locale."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM and will eject the\n"
+"current CD and ask you to insert a different one as required."
+msgstr ""
+"La distribuzione Mandrake Linux è suddivisa su più CD-ROM. DrakX sa se uno\n"
+"dei pacchetti selezionati si trova su un altro CD-ROM, pertanto provvederà\n"
+"a espellere il CD attualmente inserito nel lettore e a chiedervi di\n"
+"inserire quello corretto."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"root\" is the system\n"
+"administrator and is the only one authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
+"easy to compromise a system.\n"
+"\n"
+"However, please do not make the password too long or complicated because\n"
+"you must be able to remember it without too much effort.\n"
+"\n"
+"The password will not be displayed on screen as you type it in. Hence, you\n"
+"will have to type the password twice to reduce the chance of a typing\n"
+"error. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will have to be used the first time you connect.\n"
+"\n"
+"In Expert mode, you will be asked if you will be connecting to an\n"
+"authentication server, like NIS or LDAP.\n"
+"\n"
+"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
+"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
+"network administrator.\n"
+"\n"
+"If your computer is not connected to any administrated network, you will\n"
+"want to choose \"Local files\" for authentication."
+msgstr ""
+"Questo è il punto più critico per la sicurezza del vostro sistema\n"
+"GNU/Linux: state per decidere la password di \"root\". \"root\" è\n"
+"l'amministratore del sistema, ed è l'unico utente autorizzato a compiere\n"
+"aggiornamenti, aggiungere altri utenti, cambiare la configurazione globale\n"
+"del sistema, etc. In breve, può fare tutto ciò che vuole! Questo è il\n"
+"motivo per cui dovete scegliere una password che sia difficile da\n"
+"indovinare: DrakX vi dirà se è troppo facile. Potete anche scegliere di non\n"
+"digitare una password, ma noi vi consigliamo caldamente di farlo, almeno\n"
+"per un motivo: non pensate che, avviando il sistema con GNU/Linux, gli\n"
+"altri sistemi operativi che convivono con esso sulla stessa macchina siano\n"
+"al sicuro da errori; al contrario: \"root\" può scavalcare ogni limitazione\n"
+"e (magari involontariamente) cancellare tutti i dati presenti sulle\n"
+"partizioni accedendo in maniera scorretta a queste ultime! Quindi è molto\n"
+"importante che sia difficile per gli utenti normali diventare \"root\".\n"
+"\n"
+"La password ideale è costituita da un insieme di caratteri alfanumerici\n"
+"lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la password\n"
+"di \"root\", renderebbe troppo facile l'accesso al sistema da parte di\n"
+"estranei.\n"
+"\n"
+"Prestate attenzione, tuttavia, a non scegliere una password troppo lunga o\n"
+"complicata, perche dovete essere in grado di ricordarla senza troppo\n"
+"sforzo.\n"
+"\n"
+"La password non verrà mostrata mentre la digitate. Per questo motivo è\n"
+"necessario che venga inserita due volte, per ridurre il rischio di un\n"
+"errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
+"questa password \"scorretta\" sarà quella che verrà richiesta la prima\n"
+"volta che vi connetterete al sistema.\n"
+"\n"
+"In modalità Esperto vi verrà chiesto se il vostro computer è connesso a un\n"
+"server di autenticazione, secondo il protocollo NIS o LDAP.\n"
+"\n"
+"Se la vostra rete si basa sul protocollo LDAP (o NIS) per l'autenticazione,\n"
+"selezionate il pulsante \"LDAP\" (o \"NIS\") per effettuare\n"
+"l'autenticazione. Se non siete sicuri, chiedete al vostro amministratore di\n"
+"rete.\n"
+"\n"
+"Se il vostro computer non è connesso a una rete soggetta ad autenticazione,\n"
+"scegliete \"File locali\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Before continuing, you should read carefully the terms of the license. It\n"
+"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
+"all the terms in it, click on the \"Refuse\" button which will immediately\n"
+"terminate the installation. To continue with the installation, click on the\n"
+"\"Accept\" button."
+msgstr ""
+"Prima di proseguire dovreste leggere con attenzione le condizioni d'uso;\n"
+"queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
+"d'accordo con qualche punto della licenza cliccate sul pulsante\n"
+"\"Rifiuta\": la procedura di installazione sarà immediatamente interrotta.\n"
+"Per proseguire con l'installazione, invece, cliccate sul pulsante\n"
+"\"Accetta\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Listed above are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, they are good for most common\n"
+"installations. If you make any changes, you must at least define a root\n"
+"partition (\"/\"). Do not choose too small a partition or you will not be\n"
+"able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a partition for \"/home\"\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"In alto potete vedere l'elenco delle partizioni Linux individuate sul\n"
+"vostro disco rigido. Potete attenervi alle scelte fatte dall'assistente,\n"
+"vanno bene per la maggior parte delle installazioni. Se fate dei\n"
+"cambiamenti, ricordate che dovete definire per lo meno una partizione root\n"
+"(''radice'') (\"/\"). Non scegliete una partizione troppo piccola,\n"
+"altrimenti non sarete in grado di installare parte del software. Se volete\n"
+"archiviare i vostri dati su una partizione separata, dovrete creare anche\n"
+"una partizione per \"/home\" (questo è possibile soltanto se avete a\n"
+"disposizione più di una partizione Linux).\n"
+"\n"
+"Ogni partizione è elencata in base a queste caratteristiche: \"Nome\",\n"
+"\"Capacità\".\n"
+"\n"
+"Il \"Nome\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
+"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
+"\n"
+"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
+"\"sd\" se, invece, è un disco SCSI.\n"
+"\n"
+"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
+"i dischi IDE:\n"
+"\n"
+" * \"a\" significa \"disco rigido master sul controller IDE primario\";\n"
+"\n"
+" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
+"\n"
+" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
+"\n"
+" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
+"\n"
+"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
+"più\", una \"b\" significa \"ID SCSI superiore ad a\", etc."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Click on \"OK\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"Cancel\" to cancel this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Cliccate sul pulsante \"OK\" se volete tutte le partizioni e i dati\n"
+"presenti su questo disco rigido. Prestate attenzione, dopo aver cliccato su\n"
+"\"OK\" non potrete più recuperare le partizioni e i dati presenti sul\n"
+"disco, compresi eventuali dati di Windows.\n"
+"\n"
+"Cliccate su \"Annulla\" per annullare questa operazione senza che vengano\n"
+"persi dati o partizioni presenti su questo disco rigido."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
+"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
+"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
+"should come back to this step for help in at least two situations:\n"
+"\n"
+" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
+"of your main disk (unless you are using another boot manager), to allow you\n"
+"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
+"your system). If you need to reinstall Windows, the Microsoft install\n"
+"process will rewrite the boot sector, and then you will not be able to\n"
+"start GNU/Linux!\n"
+"\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
+"contains a fair number of system tools for restoring a system, which has\n"
+"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
+"password, or any other reason.\n"
+"\n"
+"When you click on this step, you will be asked to enter a disk inside the\n"
+"drive. The floppy disk you will insert must be empty or contain data which\n"
+"you do not need. You will not have to format it since DrakX will rewrite\n"
+"the whole disk."
+msgstr ""
+"Il CD-ROM di Mandrake Linux ha una modalità ''salvataggio'' preconfigurata.\n"
+"Potete accedervi effettuando il boot dal CD-ROM, premendo il tasto >>F1<<\n"
+"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
+"può essere avviato dal CD-ROM, dovete effettuare questa operazione (la\n"
+"creazione di un disco di avvio) per almeno due ragioni:\n"
+"\n"
+" * DrakX riscriverà il settore di boot (MBR) del vostro disco principale (a\n"
+"meno che voi non usiate un altro gestore del boot), in modo che possiate\n"
+"avviare sia Windows che GNU/Linux, se sul vostro sistema è installato anche\n"
+"Windows. Tuttavia, se in futuro si renderà necessario re-installare\n"
+"Windows, il programma di installazione Microsoft riscriverà il settore di\n"
+"boot, e di conseguenza non sarete più in grado di avviare GNU/Linux!\n"
+"\n"
+" * se si verifica un problema per cui non potete più lanciare GNU/Linux dal\n"
+"disco rigido, questo dischetto sarà l'unico mezzo per avviare GNU/Linux:\n"
+"contiene un buon numero di programmi di amministrazione del sistema per\n"
+"rimettere in sesto un'installazione che ha subito abbia crash per\n"
+"un'interruzione di corrente, uno sfortunato errore di battitura, una\n"
+"password dimenticata o qualsiasi altra ragione.\n"
+"\n"
+"Quando cliccherete su \"Sì\", vi verrà chiesto di inserire un disco in un\n"
+"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
+"vuoto o contenere soltanto dati di cui non avete più bisogno. Non sarà\n"
+"necessario formattarlo: DrakX riscriverà l'intero disco."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Finally, depending on whether or not you selected individual packages, you\n"
+"will be presented a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right. When your selection is finished, click the \"Install\" button which\n"
+"will then launch the installation process. Depending on the speed of your\n"
+"hardware and the number of packages that need to be installed, it may take\n"
+"a while to complete the process. An estimate of the time it will take to\n"
+"install everything is displayed on the screen, to help you gauge if there\n"
+"is sufficient time to enjoy a cup of coffee.\n"
+"\n"
+"!! If a server package has been selected, either intentionally or because\n"
+"it was part of a whole group, you will be asked to confirm that you really\n"
+"want those servers to be installed. Under Mandrake Linux, any installed\n"
+"servers are started by default at boot time. Even if they are safe and have\n"
+"no known issues at the time the distribution was shipped, it may happen\n"
+"that security holes are discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default. !!\n"
+"\n"
+"The \"Automatic dependencies\" option simply disables the warning dialog\n"
+"which appears whenever the installer automatically selects a package. This\n"
+"occurs because it has determined that it needs to satisfy a dependency with\n"
+"another package in order to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows to load the\n"
+"package list chosen during a previous installation. Clicking on this icon\n"
+"will ask you to insert a floppy disk previously created at the end of\n"
+"another installation. See the second tip of last step on how to create such\n"
+"a floppy."
+msgstr ""
+"Ora, se avete scelto di indicare i pacchetti su base individuale, potete\n"
+"vedere una struttura ad albero contenente tutti i pacchetti organizzati in\n"
+"gruppi e sotto-gruppi. Mentre sfogliate questa lista gerarchica potete\n"
+"selezionare interi gruppi, sotto-gruppi o singoli pacchetti.\n"
+"\n"
+"Quando selezionate un pacchetto all'interno dell'albero, ne compare una\n"
+"descrizione sulla destra. Una volta terminata la scelta, cliccate sul\n"
+"pulsante \"Installa\" che provvederà a far partire l'installazione vera e\n"
+"propria. Il tempo necessario varia in base al numero di pacchetti che\n"
+"devono essere installati e alla velocità del vostro hardware, l'attesa\n"
+"potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
+"l'installazione è visibile sullo schermo, in questo modo potrete sapere se\n"
+"avete tempo a sufficienza per godervi una tazza di caffe.\n"
+"\n"
+"!! Se avete selezionato un pacchetto che offre un servizio come server\n"
+"(intenzionalmente, oppure perche faceva parte di un gruppo), vi verrà\n"
+"chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
+"predefinita, in Mandrake Linux tutti i servizi installati vengono avviati\n"
+"automaticamente al momento del boot. Anche se si tratta di servizi sicuri\n"
+"al momento in cui è stata rilasciata questa versione della distribuzione,\n"
+"potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
+"momento successivo. Se poi non avete proprio idea di quale sia la funzione\n"
+"di uno di questi pacchetti, cliccate sul pulsante \"No\". Cliccando su\n"
+"\"Sì\" i servizi elencati verranno installati e saranno attivati in maniera\n"
+"automatica. !!\n"
+"\n"
+"L'opzione \"Mostra i pacchetti selezionati automaticamente\" vi permette di\n"
+"disabilitare la finestra di dialogo che compare tutte le volte che il\n"
+"programma di installazione seleziona automaticamente uno o più pacchetti.\n"
+"Il programma determina in modo automatico, infatti, quali sono i pacchetti\n"
+"che sono indispensabili a un dato pacchetto (''dipendenze'') perche\n"
+"quest'ultimo possa essere installato con successo.\n"
+"\n"
+"Il piccolo dischetto floppy in fondo alla lista vi permette di caricare una\n"
+"lista di pacchetti scelti durante una precedente installazione. Cliccando\n"
+"su questa icona vi verrà chiesto di inserire un floppy che avrete creato\n"
+"alla fine di un'altra installazione. Consultate le informazioni che\n"
+"riguardano l'ultimo passo del processo di installazione per sapere come\n"
+"creare questo dischetto."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a filesystem).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"any of it.\n"
+"\n"
+"Click on \"OK\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"Cancel\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
+"for bad blocks on the disk."
+msgstr ""
+"Qualsiasi partizione appena definita deve essere formattata prima di poter\n"
+"essere usata (formattare significa creare un filesystem).\n"
+"\n"
+"Potreste anche voler riformattare alcune partizioni preesistenti, per\n"
+"cancellare i dati che contengono. Se desiderate farlo, scegliete qui le\n"
+"partizioni che intendete formattare.\n"
+"\n"
+"Tenete presente che non è necessario riformattare tutte le partizioni\n"
+"preesistenti. Dovete formattare le partizioni che contengono il sistema\n"
+"operativo (come \"/\", \"/usr\" o \"/var\"), ma potete evitare di\n"
+"riformattare partizioni che contengono dati che desiderate conservare\n"
+"(tipicamente \"/home\").\n"
+"\n"
+"Fate molta attenzione nella scelta delle partizioni, dopo la formattazione\n"
+"tutti i dati saranno cancellati e non potrete recuperarli.\n"
+"\n"
+"Cliccate su \"Ok\" quando siete pronti a formattare le partizioni.\n"
+"\n"
+"Cliccate su \"Annulla\" se desiderate scegliere altre partizioni sulle\n"
+"quali installare il vostro nuovo sistema operativo Mandrake Linux.\n"
+"\n"
+"Cliccate su \"Avanzato\" se desiderate che le partizioni selezionate\n"
+"vengano controllate per accertare la presenza di eventuali blocchi\n"
+"danneggiati."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"Normally, DrakX selects the right keyboard for you (depending on the\n"
+"language you have chosen) and you won't even see this step. However, you\n"
+"might not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may still want\n"
+"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
+"located in Quebec, you may find yourself in the same situation. In both\n"
+"cases, you will have to go back to this installation step and select an\n"
+"appropriate keyboard from the list.\n"
+"\n"
+"Click on the \"More\" button to be presented with the complete list of\n"
+"supported keyboards."
+msgstr ""
+"Normalmente DrakX provvede a individuare automaticamente la tastiera\n"
+"corretta (in base alla lingua che avete scelto) e voi non vedrete nemmeno\n"
+"questo passo. Tuttavia, potreste avere una tastiera che non corrisponde\n"
+"esattamente alla vostra lingua: se siete un francese che parla italiano, ad\n"
+"esempio, potreste comunque preferire una tastiera francese. Oppure, se\n"
+"parlate italiano ma vivete nel Quebec, potreste trovarvi nella stessa\n"
+"situazione. In entrambi i casi, dovrete tornare a questa fase\n"
+"dell'installazione e selezionare una tastiera appropriata dalla lista.\n"
+"\n"
+"Cliccate sul pulsante \"Avanzato\" per vedere una lista completa delle\n"
+"tastiere supportate."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"You must indicate where you wish to place the information required to boot\n"
+"to GNU/Linux.\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of drive\n"
+"(MBR)\"."
+msgstr ""
+"Dovete adesso indicare dove volete che vengano collocate le informazioni\n"
+"necessarie per effettuare il boot con GNU/Linux.\n"
+"\n"
+"A meno che non sappiate esattamente quello che state facendo, scegliete\n"
+"\"Primo settore del disco rigido (MBR)\"."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"OK\" to reboot the system. You can start\n"
+"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
+"soon as the computer has booted up again.\n"
+"\n"
+"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"\n"
+" * \"generate auto-install floppy\": to create an installation floppy disk\n"
+"which will automatically perform a whole installation without the help of\n"
+"an operator, similar to the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"Replay\". This is a partially automated installation as the\n"
+"partitioning step (and only this one) remains interactive;\n"
+"\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a great number of similar\n"
+"machines. See the Auto install section on our web site;\n"
+"\n"
+" * \"Save packages selection\"(*): saves the package selection as done\n"
+"previously. Then, when doing another installation, insert the floppy inside\n"
+"the drive and run the installation going to the help screen by pressing on\n"
+"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Ecco fatto: l'installazione è terminata, e il vostro sistema GNU/Linux è\n"
+"pronto per essere usato. Dovete soltanto cliccare sul pulsante \"OK\" per\n"
+"riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
+"qualunque preferiate dei due, non appena il computer avrà terminato di\n"
+"effettuare il boot.\n"
+"\n"
+"Cliccando sul pulsante \"Avanzato\" (solo in modalità Esperto) avrete altri\n"
+"due pulsanti a vostra disposizione:\n"
+"\n"
+" * \"Crea il floppy di auto installazione\": per creare un floppy di\n"
+"installazione che permette di eseguire automaticamente un' installazione\n"
+"completa, del tutto simile a quella che avete appena finito di configurare,\n"
+"senza che sia necessario l'intervento di un operatore.\n"
+"\n"
+"   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
+"opzioni diverse:\n"
+"\n"
+"    * \"Ripeti\": questa è un'installazione automatizzata solo in parte, in\n"
+"quanto la fase di partizionamento del disco (e solo quella) resta\n"
+"interattiva.\n"
+"\n"
+"    * \"Automatizzata\": l'installazione è completamente automatizzata: il\n"
+"disco rigido viene riscritto per intero, tutti tutti i dati che contiene\n"
+"andranno persi.\n"
+"\n"
+"   Questa caratteristica è molto utile quando si deve installare il sistema\n"
+"su un gran numero di macchine dalle caratteristiche simili. Si veda la\n"
+"sezione Installazione automatica sul nostro sito web.\n"
+"\n"
+" * \"Salva scelta pacchetti\"(*): salva la selezione dei pacchetti\n"
+"effettuata in precedenza. Al momento di effettuare un'altra installazione,\n"
+"potrete inserire il dischetto nel lettore e installare il sistema\n"
+"richiamando lo schermo di aiuto (premendo [F1]) e digitando >>linux\n"
+"defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Sarà necessario un dischetto formattato con il filesystem FAT: per\n"
+"formattarne uno sotto GNU/Linux digitate \"mformat a:\""
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"DrakX now detects any IDE device present in your computer. It will also\n"
+"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection does not always detect a piece of hardware,\n"
+"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
+"if you know that there is a SCSI card installed in your machine. You will\n"
+"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
+"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
+"detected in your machine by selecting \"See hardware info\" and clicking\n"
+"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
+"return to the SCSI interface question.\n"
+"\n"
+"If you have to manually specify your adapter, DrakX will ask if you want to\n"
+"specify options for it. You should allow DrakX to probe the hardware for\n"
+"the card-specific options which the hardware needs to initialize. This\n"
+"usually works well.\n"
+"\n"
+"If DrakX is not able to probe for the options which need to be passed, you\n"
+"will need to provide options to the driver manually. Please review the\n"
+"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
+"Hardware'' section) for hints on retrieving the parameters required from\n"
+"hardware documentation, from the manufacturer's web site (if you have\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
+"Windows on your system)."
+msgstr ""
+"Ora DrakX procederà con il rilevamento di tutti i dischi rigidi e altri\n"
+"dispositivi IDE presenti sul vostro computer, e cercherà anche di stabilire\n"
+"se sul vostro sistema sono presenti una o più schede SCSI di tipo PCI. Se\n"
+"verrà individuato un dispositivo di questo tipo, DrakX installerà\n"
+"automaticamente il driver appropriato.\n"
+"\n"
+"Dato che il riconoscimento automatico in alcuni casi potrebbe non riuscire\n"
+"a individuare una particolare periferica, vi verrà comunque chiesto se\n"
+"avete una scheda SCSI PCI diversa da quelle eventualmente identificate\n"
+"oppure no. Scegliete \"Sì\" se siete sicuri che nel vostro computer è\n"
+"presente un'altra scheda SCSI: potrete scegliere la vostra scheda da una\n"
+"lista. Scegliete \"No\" se non disponete di nessun tipo di hardware SCSI, o\n"
+"se siete soddisfatti del riconoscimento automatico. Se non siete sicuri,\n"
+"potete anche controllare la lista dell'hardware rilevato nella vostra\n"
+"macchina selezionando \"Vedi informazioni hardware\" e cliccando su \"Ok\".\n"
+"Controllate l'elenco dell'hardware individuato e poi cliccate sul pulsante\n"
+"\"Ok\" per ritornare alla domanda relativa alla scheda SCSI.\n"
+"\n"
+"Se sarete costretti a specificare manualmente il tipo di scheda in vostro\n"
+"possesso, DrakX vi chiederà se intendete indicare delle opzioni da usare\n"
+"con essa. Vi consigliamo di permettere a DrakX di esaminare l'hardware per\n"
+"stabilire le particolari opzioni della scheda che dovranno essere usate\n"
+"all'inizializzazione; questo metodo in genere permette di ottenere buoni\n"
+"risultati.\n"
+"\n"
+"Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
+"scheda, dovrete specificarle manualmente. Consultate il ''Manuale\n"
+"dell'utente'' (capitolo 3, paragrafo \"Ricerca di informazioni sul vostro\n"
+"hardware\") per qualche suggerimento su come ottenerle dalla documentazione\n"
+"dell'hardware, dal sito web del produttore (se disponete di un accesso a\n"
+"Internet) o da Microsoft Windows (se avete utilizzato la stessa scheda con\n"
+"Windows sul vostro stesso sistema)."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension;\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation;\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used;\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"Here, you can override this option;\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support;\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
+"selections."
+msgstr ""
+"You can add additional entries for yaboot, either for other operating\n"
+"systems, alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OS's, the entry consists only of a label and the root partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is used quite often\n"
+"to assist in initializing video hardware, or to enable keyboard mouse\n"
+"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
+"Apple mouse. The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules, before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
+"need to allocate a large ramdisk, this option can be used.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially brought up in\n"
+"read-only, to allow a file system check before the system becomes \"live\".\n"
+"Here, you can override this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in \"novideo\" mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
+"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
+"selections."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive;\n"
+"\n"
+" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
+"and swap partitions in free space of your hard drive;\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
+"\n"
+"    * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk;\n"
+"\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
+"\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
+"\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning;\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes;\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
+"\n"
+" * \"Done\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the ext2fs chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"A questo punto, dovete decidere quali partizioni devono essere usate per\n"
+"l'installazione del vostro sistema Mandrake Linux. Se sono già state\n"
+"definite delle partizioni, grazie a una precedente installazione di\n"
+"GNU/Linux o usando un altro programma di partizionamento, potete utilizzare\n"
+"le partizioni esistenti. In caso contrario, sarà necessario creare o\n"
+"modificare le partizioni del disco rigido.\n"
+"\n"
+"Per creare delle partizioni dovete, per prima cosa, selezionare un disco\n"
+"rigido. Potete scegliere il disco da partizionare cliccando su \"hda\" per\n"
+"il primo disco IDE, \"hdb\" per il secondo, \"sda\" per il primo disco\n"
+"SCSI, e così via.\n"
+"\n"
+"Per partizionare il disco selezionato potete scegliere fra queste opzioni:\n"
+"\n"
+" * \"Cancella tutto\": questa opzione cancella tutte le partizioni presenti\n"
+"sul disco selezionato.\n"
+"\n"
+" * \"Alloca automaticamente\": questa opzione vi permette di creare\n"
+"automaticamente partizioni di sistema e di swap nello spazio libero\n"
+"presente sul vostro disco rigido.\n"
+"\n"
+" * \"Ancora\": permette di accedere a funzionalità avanzate:\n"
+"\n"
+"    * \"Salva tabella delle partizioni\": salva la tabella delle partizioni\n"
+"su un floppy. Utile per recuperarla in un momento successivo, se\n"
+"necessario. Vi raccomandiamo caldamente di effettuare questa operazione.\n"
+"\n"
+"    * \"Ripristina tabella delle partizioni\": permette di ripristinare una\n"
+"tabella delle partizioni precedentemente salvata su floppy disk.\n"
+"\n"
+"    * \"Recupera tabella delle partizioni\": se la vostra tabella delle\n"
+"partizioni è danneggiata potete provare a recuperarla grazie a questa\n"
+"opzione. Procedete con attenzione, e ricordate che potrebbe non avere\n"
+"successo.\n"
+"\n"
+"    * \"Ricarica tabella delle partizioni\": annulla tutte le modifiche e\n"
+"ricarica la tabella delle partizioni originaria.\n"
+"\n"
+"    * \"Removable media automounting\": se disabilitate questa opzione gli\n"
+"utenti saranno costretti a montare e smontare manualmente i dispositivi\n"
+"rimovibili come lettori floppy e CD-ROM.\n"
+"\n"
+" * \"Assistente\": usate questa opzione se desiderate che il\n"
+"partizionamento del disco sia effettuato con l'aiuto di un assistente.\n"
+"Altamente raccomandata se non avete una buona conoscenza del\n"
+"partizionamento.\n"
+"\n"
+" * \"Un passo indietro\": con questa opzione le modifiche apportate\n"
+"verranno annullate.\n"
+"\n"
+" * \"Passa a modo Esperto\": permette di effettuare ulteriori azioni sulle\n"
+"partizioni (tipo, opzioni, formattazione) e offre più informazioni.\n"
+"\n"
+" * \"Fatto\": quando avrete finito il partizionamento del disco cliccate su\n"
+"questa opzione, le vostre modifiche verranno salvate sul disco.\n"
+"\n"
+"Si noti che è possibile raggiungere ogni opzione usando la tastiera. Per\n"
+"spostarvi fra le partizioni usate i tasti [Tab] e le frecce [Sù/Giù].\n"
+"\n"
+"Dopo aver selezionato una partizione potete usare:\n"
+"\n"
+" * Ctrl-c per creare una nuova partizione (se avete selezionato una\n"
+"partizione vuota);\n"
+"\n"
+" * Ctrl-d per cancellare una partizione;\n"
+"\n"
+" * Ctrl-m per impostare il punto di mount.\n"
+"\n"
+"Per ottenere informazioni in merito ai diversi tipi di filesystem\n"
+"disponibili, consultate il capitolo ext2fs del ''Manuale di riferimento''.\n"
+"\n"
+"Se state effettuando l'installazione su una macchina PPC, sarà necessario\n"
+"creare una piccola partizione HFS di almeno 11Mb, che verrà utilizzata dal\n"
+"bootloader yaboot. Se decidete di creare una partizione più grande, diciamo\n"
+"sui 50Mb, potrebbe rappresentare un utile deposito dove conservare un\n"
+"kernel di riserva e immagini di ''ramdisk'' da utilizzare in caso di\n"
+"emergenza."
+