summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/zh_CN.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/zh_CN.po')
-rw-r--r--perl-install/share/po/zh_CN.po3662
1 files changed, 3662 insertions, 0 deletions
diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
new file mode 100644
index 000000000..8c3f83a2d
--- /dev/null
+++ b/perl-install/share/po/zh_CN.po
@@ -0,0 +1,3662 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 1999 Free Software Foundation, Inc.
+# Copyright (c) 1999 MandrakeSoft
+# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
+# c17@acer.17.o3.net
+#
+# NOTE: this file is the result of the conversion of zh_TW.Big5.po trough
+# 'b5togb' filter; however, as I've been told that there are idiomatisms
+# by doing like that, a real mantainer of the zh_CN.po file is still wanted
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: DrakX VERSION\n"
+"POT-Creation-Date: 2000-01-09 21:03+0100\n"
+"PO-Revision-Date: 1999-12-15 00:33+0100\n"
+"Last-Translator: Nobody yet\n"
+"Language-Team: Chinese (GB2312)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=gb2312\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Graphic card"
+msgstr "显示卡"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Select a graphic card"
+msgstr "选取您的显示卡"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "Choose a X server"
+msgstr "选取合适的 X 伺服程式"
+
+#: ../Xconfigurator.pm_.c:160
+#, fuzzy
+msgid "X server"
+msgstr "伺服器"
+
+#: ../Xconfigurator.pm_.c:181
+msgid "Select the memory size of your graphic card"
+msgstr "设定显示卡上的绘图记忆体大小"
+
+#: ../Xconfigurator.pm_.c:203
+msgid "Choose options for server"
+msgstr "选取 X 伺服程式的参数"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Choose a monitor"
+msgstr "选取合适的萤幕"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Monitor"
+msgstr "萤幕"
+
+#: ../Xconfigurator.pm_.c:224
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"两个重要的参数是垂直更新频率和水平更新频率。\n"
+"\n"
+"如果你选择了超过您的萤幕所能负荷的设定值,\n"
+"可能会伤害到您的萤幕。请小心!"
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Horizontal refresh rate"
+msgstr "水平更新频率"
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Vertical refresh rate"
+msgstr "垂直更新频率"
+
+#: ../Xconfigurator.pm_.c:272
+msgid "Monitor not configured"
+msgstr "没有完成设定萤幕的动作"
+
+#: ../Xconfigurator.pm_.c:275
+msgid "Graphic card not configured yet"
+msgstr "尚未完成显示卡的设定"
+
+#: ../Xconfigurator.pm_.c:278
+msgid "Resolutions not chosen yet"
+msgstr "尚未选取要使用的解析度"
+
+#: ../Xconfigurator.pm_.c:289
+msgid "Do you want to test the configuration?"
+msgstr "您想要测试您的设定值吗 ?"
+
+#: ../Xconfigurator.pm_.c:293
+msgid "Warning: testing is dangerous on this graphic card"
+msgstr "小心! 这项测式在此张显示卡会有危险"
+
+#: ../Xconfigurator.pm_.c:296
+msgid "Test configuration"
+msgstr "测试设定值"
+
+#: ../Xconfigurator.pm_.c:334
+msgid "An error occurred:"
+msgstr "发生错误∶"
+
+#: ../Xconfigurator.pm_.c:336
+msgid ""
+"\n"
+"try changing some parameters"
+msgstr ""
+"\n"
+"试着更改一些参数的设定值"
+
+#: ../Xconfigurator.pm_.c:358
+#, c-format
+msgid "(leaving in %d seconds)"
+msgstr "(在经过 %d 秒后离开)"
+
+#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
+msgid "Is this correct?"
+msgstr "这个设定正确吗 ?"
+
+#: ../Xconfigurator.pm_.c:370
+msgid "An error occurred, try changing some parameters"
+msgstr "发生错误,请试着更改一些参数的设定值"
+
+#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
+msgid "Automatic resolutions"
+msgstr "自动设定解析度"
+
+#: ../Xconfigurator.pm_.c:379
+msgid ""
+"To find the available resolutions I will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+"程式将会尝试几种不同的解析度以找出可用的设定值,\n"
+"您的萤幕将会闪动一阵子... 假如您要保护您的萤幕的话,\n"
+"可以将萤幕电源先关掉一下子;程式执行结束后,会有哔一声提醒您"
+
+#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
+msgid "Resolution"
+msgstr "解析度"
+
+#: ../Xconfigurator.pm_.c:469
+msgid "Choose resolution and color depth"
+msgstr "选取解析度以及颜色数"
+
+#: ../Xconfigurator.pm_.c:477
+msgid "Show all"
+msgstr "显示全部"
+
+#: ../Xconfigurator.pm_.c:501
+#, fuzzy
+msgid "Resolutions"
+msgstr "解析度"
+
+#: ../Xconfigurator.pm_.c:548
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Sometimes, though, it may hang the machine.\n"
+"Do you want to try?"
+msgstr ""
+"这个程式会自动找出可用的解析度 (如: 800x600)。\n"
+"不过,有时候这个动作会让机器当住,\n"
+"您要试试看吗 ?"
+
+#: ../Xconfigurator.pm_.c:553
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+"找不到可用的显示模式,\n"
+"请检查您的显示卡或萤幕设定是否正确"
+
+#: ../Xconfigurator.pm_.c:772
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "键盘的形式: %s\n"
+
+#: ../Xconfigurator.pm_.c:773
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr "滑鼠的种类: %s\n"
+
+#: ../Xconfigurator.pm_.c:774
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "滑鼠连接的位置: %s\n"
+
+#: ../Xconfigurator.pm_.c:775
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "萤幕: %s\n"
+
+#: ../Xconfigurator.pm_.c:776
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "萤幕水平更新频率: %s\n"
+
+#: ../Xconfigurator.pm_.c:777
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "萤幕垂直更新频率: %s\n"
+
+#: ../Xconfigurator.pm_.c:778
+#, c-format
+msgid "Graphic card: %s\n"
+msgstr "显示卡: %s\n"
+
+#: ../Xconfigurator.pm_.c:779
+#, c-format
+msgid "Graphic memory: %s kB\n"
+msgstr "绘图记忆体: %s kB\n"
+
+#: ../Xconfigurator.pm_.c:780
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 伺服程式: %s\n"
+
+#: ../Xconfigurator.pm_.c:794
+msgid "Preparing X-Window configuration"
+msgstr "正在准备 X-Window 的设定"
+
+#: ../Xconfigurator.pm_.c:808
+msgid "Change Monitor"
+msgstr "改变萤幕设定"
+
+#: ../Xconfigurator.pm_.c:809
+msgid "Change Graphic card"
+msgstr "改变显示卡设定"
+
+#: ../Xconfigurator.pm_.c:810
+msgid "Change Server options"
+msgstr "改变伺服程式的参数设定"
+
+#: ../Xconfigurator.pm_.c:811
+msgid "Change Resolution"
+msgstr "改变解析度设定"
+
+#: ../Xconfigurator.pm_.c:812
+msgid "Automatical resolutions search"
+msgstr "自动寻找可用的解析度"
+
+#: ../Xconfigurator.pm_.c:816
+msgid "Show information"
+msgstr "显示所有资讯"
+
+#: ../Xconfigurator.pm_.c:817
+msgid "Test again"
+msgstr "再次测试设定值"
+
+#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
+msgid "Quit"
+msgstr "结束"
+
+#: ../Xconfigurator.pm_.c:822
+msgid "What do you want to do?"
+msgstr "您打算怎么作 ?"
+
+#: ../Xconfigurator.pm_.c:829
+msgid "Forget the changes?"
+msgstr "放弃您所做的改变 ?"
+
+#: ../Xconfigurator.pm_.c:845
+#, c-format
+msgid "Please relog into %s to activate the changes"
+msgstr "请由 %s 来启动您所做的更改"
+
+#: ../Xconfigurator.pm_.c:861
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "请离开然后同时按 Ctrl-Alt-BackSpace"
+
+#: ../Xconfigurator.pm_.c:864
+msgid "X at startup"
+msgstr "开机时启动 X"
+
+#: ../Xconfigurator.pm_.c:865
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+"程式可以帮您设定在开机时自动进入绘图模式,\n"
+"您希望在重新开机以后就自动进入绘图模式吗 ?"
+
+#: ../Xconfigurator_consts.pm_.c:4
+msgid "256 colors (8 bits)"
+msgstr "256 色 (8 位元)"
+
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors (15 bits)"
+msgstr "3 万 2 千色 (15 位元)"
+
+#: ../Xconfigurator_consts.pm_.c:6
+msgid "65 thousand colors (16 bits)"
+msgstr "6 万 5 千色 (16 位元)"
+
+#: ../Xconfigurator_consts.pm_.c:7
+msgid "16 million colors (24 bits)"
+msgstr "1 千 6 百万色 (24 位元)"
+
+#: ../Xconfigurator_consts.pm_.c:8
+msgid "4 billion colors (32 bits)"
+msgstr "4 亿色 (32 位元)"
+
+#: ../Xconfigurator_consts.pm_.c:96
+msgid "256 kB"
+msgstr "256 kB"
+
+#: ../Xconfigurator_consts.pm_.c:97
+msgid "512 kB"
+msgstr "512 kB"
+
+#: ../Xconfigurator_consts.pm_.c:98
+msgid "1 MB"
+msgstr "1 MB"
+
+#: ../Xconfigurator_consts.pm_.c:99
+msgid "2 MB"
+msgstr "2 MB"
+
+#: ../Xconfigurator_consts.pm_.c:100
+msgid "4 MB"
+msgstr "4 MB"
+
+#: ../Xconfigurator_consts.pm_.c:101
+msgid "8 MB"
+msgstr "8 MB"
+
+#: ../Xconfigurator_consts.pm_.c:102
+msgid "16 MB or more"
+msgstr "16 MB or more"
+
+#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
+msgid "Standard VGA, 640x480 at 60 Hz"
+msgstr "标准 VGA 模式, 640x480 at 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:109
+msgid "Super VGA, 800x600 at 56 Hz"
+msgstr "Super VGA, 800x600 at 56 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:110
+msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
+msgstr "8514 相容模式, 1024x768 at 87 Hz interlaced (no 800x600)"
+
+#: ../Xconfigurator_consts.pm_.c:111
+msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:112
+msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:113
+msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:114
+msgid "High Frequency SVGA, 1024x768 at 70 Hz"
+msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:115
+msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
+msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:116
+msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
+msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:117
+msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
+msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:118
+msgid "Monitor that can do 1600x1200 at 70 Hz"
+msgstr "您的萤幕可使用 1600x1200 at 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:119
+msgid "Monitor that can do 1600x1200 at 76 Hz"
+msgstr "您的萤幕可使用 1600x1200 at 76 Hz"
+
+#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
+msgid "Create"
+msgstr "新建"
+
+#: ../diskdrake.pm_.c:17
+msgid "Unmount"
+msgstr "卸载"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
+msgid "Delete"
+msgstr "删除"
+
+#: ../diskdrake.pm_.c:18
+msgid "Format"
+msgstr "格式化"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
+msgid "Resize"
+msgstr "改变大小"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
+msgid "Type"
+msgstr "格式"
+
+#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
+msgid "Mount point"
+msgstr "挂载点"
+
+#: ../diskdrake.pm_.c:33
+msgid "Write /etc/fstab"
+msgstr "写入 /etc/fstab"
+
+#: ../diskdrake.pm_.c:34
+msgid "Toggle to expert mode"
+msgstr "进入专家模式"
+
+#: ../diskdrake.pm_.c:35
+msgid "Toggle to normal mode"
+msgstr "进入模通模式"
+
+#: ../diskdrake.pm_.c:36
+msgid "Restore from file"
+msgstr "恢复存在档案中的设定值"
+
+#: ../diskdrake.pm_.c:37
+msgid "Save in file"
+msgstr "存入档案"
+
+#: ../diskdrake.pm_.c:38
+msgid "Restore from floppy"
+msgstr "恢复存在软碟中的设定值"
+
+#: ../diskdrake.pm_.c:39
+msgid "Save on floppy"
+msgstr "存入软碟"
+
+#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
+#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
+msgid "Done"
+msgstr "完成"
+
+#: ../diskdrake.pm_.c:43
+msgid "Clear all"
+msgstr "全部清除"
+
+#: ../diskdrake.pm_.c:44
+msgid "Format all"
+msgstr "全部格式化"
+
+#: ../diskdrake.pm_.c:45
+msgid "Auto allocate"
+msgstr "自动分配"
+
+#: ../diskdrake.pm_.c:48
+msgid "All primary partitions are used"
+msgstr "主分割区数目已经满了"
+
+#: ../diskdrake.pm_.c:48
+msgid "I can't add any more partition"
+msgstr "程式无法再新增任何分割区了"
+
+#: ../diskdrake.pm_.c:48
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "需要有更多的分割区的话,请删除一个主分割区以建立延伸分割区"
+
+#: ../diskdrake.pm_.c:51
+#, fuzzy
+msgid "Rescue partition table"
+msgstr "写入硬碟分割表"
+
+#: ../diskdrake.pm_.c:52
+msgid "Undo"
+msgstr "取消"
+
+#: ../diskdrake.pm_.c:53
+msgid "Write partition table"
+msgstr "写入硬碟分割表"
+
+#: ../diskdrake.pm_.c:54
+msgid "Reload"
+msgstr "重读"
+
+#: ../diskdrake.pm_.c:98
+msgid "Empty"
+msgstr "清空"
+
+#: ../diskdrake.pm_.c:98
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../diskdrake.pm_.c:98
+msgid "FAT"
+msgstr "FAT"
+
+#: ../diskdrake.pm_.c:98
+msgid "Other"
+msgstr "其他"
+
+#: ../diskdrake.pm_.c:98
+msgid "Swap"
+msgstr "Swap"
+
+#: ../diskdrake.pm_.c:104
+msgid "Filesystem types:"
+msgstr "档案系统格式∶"
+
+#: ../diskdrake.pm_.c:113
+msgid "Details"
+msgstr "详细资讯"
+
+#: ../diskdrake.pm_.c:127
+#, fuzzy
+msgid ""
+"You have one big fat partition\n"
+"(generally use by MicroSoft Dos/Windows).\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"您有一个很大的 fat 分割区,\n"
+"建议您重设这个分割区的大小\n"
+"(点选这个分割区,然后按 \"改变大小\" )"
+
+#: ../diskdrake.pm_.c:132
+msgid "Please make a backup of your data first"
+msgstr "请先备份您的资料"
+
+#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
+#: ../diskdrake.pm_.c:487
+msgid "Read carefully!"
+msgstr "看仔细!!"
+
+#: ../diskdrake.pm_.c:146
+#, c-format
+msgid "After %s partition %s,"
+msgstr "在 %s 分割区 %s 之后,"
+
+#: ../diskdrake.pm_.c:146
+msgid "all data on this partition will be lost"
+msgstr "所有在这个分割区上的资料都会被清除"
+
+#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
+#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
+#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
+msgid "Error"
+msgstr "错误"
+
+#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
+msgid "Mount point: "
+msgstr "挂载点:"
+
+#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
+msgid "Device: "
+msgstr "装置: "
+
+#: ../diskdrake.pm_.c:191
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS 底下的磁碟代号: %s (猜测值,仅供参考)\n"
+
+#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
+msgid "Type: "
+msgstr "格式: "
+
+#: ../diskdrake.pm_.c:193
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "开始: 第 %s 磁轨\n"
+
+#: ../diskdrake.pm_.c:194
+#, c-format
+msgid "Size: %s MB"
+msgstr "大小: %s MB"
+
+#: ../diskdrake.pm_.c:196
+#, c-format
+msgid ", %s sectors"
+msgstr ", 第 %s 磁轨"
+
+#: ../diskdrake.pm_.c:198
+#, c-format
+msgid "Cylinder %d to cylinder %d\n"
+msgstr "第 %d 磁柱到第 %d 磁柱\n"
+
+#: ../diskdrake.pm_.c:199
+msgid "Formatted\n"
+msgstr "已格式化\n"
+
+#: ../diskdrake.pm_.c:200
+msgid "Not formatted\n"
+msgstr "未格式化\n"
+
+#: ../diskdrake.pm_.c:201
+msgid "Mounted\n"
+msgstr "已挂载\n"
+
+#: ../diskdrake.pm_.c:202
+#, c-format
+msgid "RAID md%s\n"
+msgstr "磁碟阵列 (RAID) md%s\n"
+
+#: ../diskdrake.pm_.c:203
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"预设开机的分割区\n"
+" (给 MS-DOS 开机程式用的, 跟 lilo 无关)\n"
+
+#: ../diskdrake.pm_.c:205
+#, c-format
+msgid "Level %s\n"
+msgstr "RAID 阶层 %s\n"
+
+#: ../diskdrake.pm_.c:206
+#, c-format
+msgid "Chunk size %s\n"
+msgstr "组块大小 %s\n"
+
+#: ../diskdrake.pm_.c:207
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID 磁碟 %s\n"
+
+#: ../diskdrake.pm_.c:224
+msgid "Please click on a partition"
+msgstr "请选取一个分割区"
+
+#: ../diskdrake.pm_.c:229
+#, c-format
+msgid "Size: %d MB\n"
+msgstr "大小: %d MB\n"
+
+#: ../diskdrake.pm_.c:230
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "硬碟资讯: %s 磁柱, %s 读写头, %s 磁区\n"
+
+#: ../diskdrake.pm_.c:232
+#, c-format
+msgid "on bus %d id %d\n"
+msgstr "位在 bus %d id %d\n"
+
+#: ../diskdrake.pm_.c:245
+msgid "Mount"
+msgstr "挂载"
+
+#: ../diskdrake.pm_.c:246
+msgid "Active"
+msgstr "启动"
+
+#: ../diskdrake.pm_.c:247
+msgid "Add to RAID"
+msgstr "加入磁碟阵列"
+
+#: ../diskdrake.pm_.c:248
+msgid "Remove from RAID"
+msgstr "由磁碟阵列中移除"
+
+#: ../diskdrake.pm_.c:249
+msgid "Modify RAID"
+msgstr "变更磁碟阵列设定"
+
+#: ../diskdrake.pm_.c:256
+msgid "Choose action"
+msgstr "选择动作"
+
+#: ../diskdrake.pm_.c:349
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use LILO and it won't work, or you don't use LILO and you don't "
+"need /boot"
+msgstr ""
+
+#: ../diskdrake.pm_.c:353
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the LILO boot manager, be careful to add a /boot partition"
+msgstr ""
+
+#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "用 ``%s 取代''"
+
+#: ../diskdrake.pm_.c:375
+msgid "Use ``Unmount'' first"
+msgstr "请先 Unmount"
+
+#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
+msgid "changing type of"
+msgstr "改变分割区型态"
+
+#: ../diskdrake.pm_.c:388
+msgid "Continue anyway?"
+msgstr "仍然继续执行"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without saving"
+msgstr "不储存改变就离开"
+
+#: ../diskdrake.pm_.c:393
+#, fuzzy
+msgid "Quit without writing the partition table?"
+msgstr "写入硬碟分割表"
+
+#: ../diskdrake.pm_.c:412
+#, fuzzy
+msgid "Change partition type"
+msgstr "写入硬碟分割表"
+
+#: ../diskdrake.pm_.c:413
+#, fuzzy
+msgid "Which partition type do you want?"
+msgstr "您打算怎么作 ?"
+
+#: ../diskdrake.pm_.c:429
+#, fuzzy, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "您打算怎么作 ?"
+
+#: ../diskdrake.pm_.c:451
+#, fuzzy
+msgid "formatting"
+msgstr "格式化"
+
+#: ../diskdrake.pm_.c:453
+#, fuzzy
+msgid "Formatting"
+msgstr "格式化"
+
+#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
+#, fuzzy, c-format
+msgid "Formatting partition %s"
+msgstr "格式化硬碟分割区"
+
+#: ../diskdrake.pm_.c:458
+#, fuzzy
+msgid "After formatting all partitions,"
+msgstr "在 %s 分割区 %s 之后,"
+
+#: ../diskdrake.pm_.c:458
+#, fuzzy
+msgid "all data on these partitions will be lost"
+msgstr "所有在这个分割区上的资料都会被清除"
+
+#: ../diskdrake.pm_.c:468
+msgid "Move"
+msgstr "移动"
+
+#: ../diskdrake.pm_.c:469
+#, fuzzy
+msgid "Which disk do you want to move to?"
+msgstr "您打算怎么作 ?"
+
+#: ../diskdrake.pm_.c:473
+msgid "Sector"
+msgstr ""
+
+#: ../diskdrake.pm_.c:474
+#, fuzzy
+msgid "Which sector do you want to move to?"
+msgstr "您打算怎么作 ?"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving"
+msgstr "移动"
+
+#: ../diskdrake.pm_.c:477
+#, fuzzy
+msgid "Moving partition..."
+msgstr "格式化硬碟分割区"
+
+#: ../diskdrake.pm_.c:487
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "%s 磁碟的分割区表格将会写入磁碟中 !"
+
+#: ../diskdrake.pm_.c:489
+msgid "You'll need to reboot before the modification can take place"
+msgstr "您必需重新开机使您做的更动生效"
+
+#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
+msgid "Computing fat filesystem bounds"
+msgstr "计算档案系统的范围"
+
+#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
+#: ../install_steps_gtk.pm_.c:255
+#, fuzzy
+msgid "Resizing"
+msgstr "改变大小"
+
+#: ../diskdrake.pm_.c:524
+msgid "resizing"
+msgstr "改变中"
+
+#: ../diskdrake.pm_.c:534
+#, fuzzy
+msgid "Choose the new size"
+msgstr "选取合适的 X 伺服程式"
+
+#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:317
+#: ../install_steps_gtk.pm_.c:361
+msgid "MB"
+msgstr "MB"
+
+#: ../diskdrake.pm_.c:587
+#, fuzzy
+msgid "Create a new partition"
+msgstr "格式化硬碟分割区"
+
+#: ../diskdrake.pm_.c:603
+#, fuzzy
+msgid "Start sector: "
+msgstr "开始: 第 %s 磁轨\n"
+
+#: ../diskdrake.pm_.c:606
+#, fuzzy
+msgid "Size in MB: "
+msgstr "大小: %s MB"
+
+#: ../diskdrake.pm_.c:609
+#, fuzzy
+msgid "Filesystem type: "
+msgstr "档案系统格式∶"
+
+#: ../diskdrake.pm_.c:611
+msgid "Preference: "
+msgstr "偏好设定"
+
+#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
+#, fuzzy
+msgid "Select file"
+msgstr "存入档案"
+
+#: ../diskdrake.pm_.c:664
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"备份分割区的大小和原来的不同\n"
+"仍然继续 ?"
+
+#: ../diskdrake.pm_.c:672
+msgid "Warning"
+msgstr "警告"
+
+#: ../diskdrake.pm_.c:673
+#, fuzzy
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"请插入一张磁片\n"
+"所有在这个分割区上的资料都会被清除"
+
+#: ../diskdrake.pm_.c:687
+#, fuzzy
+msgid "Trying to rescue partition table"
+msgstr "抢救硬碟分割表"
+
+#: ../diskdrake.pm_.c:698
+msgid "device"
+msgstr "装置"
+
+#: ../diskdrake.pm_.c:699
+msgid "level"
+msgstr "层次"
+
+#: ../diskdrake.pm_.c:700
+#, fuzzy
+msgid "chunk size"
+msgstr "组块大小 %s\n"
+
+#: ../diskdrake.pm_.c:712
+msgid "Choose an existing RAID to add to"
+msgstr "选择加入一个已存在的 RAID"
+
+#: ../diskdrake.pm_.c:713
+msgid "new"
+msgstr "新增加"
+
+#: ../fs.pm_.c:67 ../fs.pm_.c:73
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "%s 格式化 在 %s 失败"
+
+#: ../fs.pm_.c:93
+#, c-format
+msgid "don't know how to format %s in type %s"
+msgstr "不知道用 %s 格式将 %s 格式化"
+
+#: ../fs.pm_.c:106
+msgid "nfs mount failed"
+msgstr "nfs 载入失败"
+
+#: ../fs.pm_.c:123
+msgid "mount failed: "
+msgstr "载入失败"
+
+#: ../fs.pm_.c:134
+#, c-format
+msgid "error unmounting %s: %s"
+msgstr "卸载失败 %s: %s"
+
+#: ../fsedit.pm_.c:219
+msgid "Mount points must begin with a leading /"
+msgstr "载入点必需要以 / 为开头"
+
+#: ../fsedit.pm_.c:222
+#, c-format
+msgid "There is already a partition with mount point %s"
+msgstr "载入点 %s 已经存在有分割区"
+
+#: ../fsedit.pm_.c:306
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "在打开 %s 写入时发生错误: %s"
+
+#: ../fsedit.pm_.c:388
+msgid ""
+"An error has occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr "发生错误 ! 没有可用的装置可以建立新的档案系统。请检查您的碟体 !"
+
+#: ../fsedit.pm_.c:403
+#, fuzzy
+msgid "You don't have any partitions!"
+msgstr "程式无法再新增任何分割区了"
+
+#: ../help.pm_.c:7
+msgid "Choose preferred language for install and system usage."
+msgstr "请选择安装及系统使用的语言"
+
+#: ../help.pm_.c:10
+msgid "Choose the layout corresponding to your keyboard from the list above"
+msgstr "请从上列表单中选出符合您使用的键盘"
+
+#: ../help.pm_.c:13
+msgid ""
+"Choose \"Install\" if there are no previous versions of Linux\n"
+"installed, or if you wish to use multiple distributions or versions.\n"
+"\n"
+"\n"
+"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
+"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
+"(Helios) or Gold 2000."
+msgstr ""
+"如果没有旧版本的 Linux ,或您想安装多种套件或是不同版本\n"
+"请选择 \"安装\"\n"
+"\n"
+"\n"
+"如果您想从旧版本的 Mandrake Linux 升级 5.1 (Venice), 5.2 (Leloo),\n"
+"5.3 (Festen), 6.0 (Venus), 6.1 (Helios) or Gold 2000 \n"
+"请选择 \"升级\"."
+
+#: ../help.pm_.c:22
+msgid ""
+"Select:\n"
+"\n"
+" - Recommended: If you have never installed Linux before.\n"
+"\n"
+"\n"
+" - Customized: If you are familiar with Linux, you will be able to \n"
+"select the usage for the installed system between normal, development or\n"
+"server. Choose \"Normal\" for a general purpose installation of your\n"
+"computer. You may choose \"Development\" if you will be using the computer\n"
+"primarily for software development, or choose \"Server\" if you wish to\n"
+"install a general purpose server (for mail, printing...).\n"
+"\n"
+"\n"
+" - Expert: If you are fluent with GNU/Linux and want to perform\n"
+"a highly customized installation, this Install Class is for you. You will\n"
+"be able to select the usage of your installed system as for \"Customized\"."
+msgstr ""
+
+#: ../help.pm_.c:40
+msgid ""
+"DrakX will attempt at first to look for one or more PCI\n"
+"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
+"to use, it will insert it (them) automatically.\n"
+"\n"
+"\n"
+"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
+"doesn't know which driver to use for this card, or if you have no\n"
+"SCSI adapters at all, you will then be prompted on whether you have\n"
+"one or not. If you have none, answer \"No\". If you have one or more,\n"
+"answer \"Yes\". A list of drivers will then pop up, from which you\n"
+"will have to select one.\n"
+"\n"
+"\n"
+"After you have selected the driver, DrakX will ask if you\n"
+"want to specify options for it. First, try and let the driver\n"
+"probe for the hardware: it usually works fine.\n"
+"\n"
+"\n"
+"If not, do not forget the information on your hardware that you\n"
+"could get from your documentation or from Windows (if you have it\n"
+"on your system), as suggested by the installation guide. These\n"
+"are the options you will need to provide to the driver."
+msgstr ""
+
+#: ../help.pm_.c:64
+msgid ""
+"At this point, you may choose what partition(s) to use to install\n"
+"your Linux-Mandrake system if they have been already defined (from a\n"
+"previous install of Linux or from another partitionning tool). In other\n"
+"cases, hard drive partitions must be defined. This operation consists of\n"
+"logically dividing the computer's hard drive capacity into separate\n"
+"areas for use.\n"
+"\n"
+"\n"
+"If you have to create new partitions, use \"Auto allocate\" to "
+"automatically\n"
+"create partitions for Linux. You can select the disk for partitionning by\n"
+"clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"\n"
+"Two common partition are: the root partition (/), which is the starting\n"
+"point of the filesystem's directory hierarchy, and /boot, which contains\n"
+"all files necessary to start the operating system when the\n"
+"computer is first turned on.\n"
+"\n"
+"\n"
+"Because the effects of this process are usually irreversible, partitioning\n"
+"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
+"simplifies the process so that it need not be. Consult the documentation\n"
+"and take your time before proceeding."
+msgstr ""
+
+#: ../help.pm_.c:90
+msgid ""
+"Any partitions that have been newly defined must be formatted for\n"
+"use (formatting meaning creating a filesystem). At this time, you may\n"
+"wish to re-format some already existing partitions to erase the data\n"
+"they contain. Note: it is not necessary to re-format pre-existing\n"
+"partitions, particularly if they contain files or data you wish to keep.\n"
+"Typically retained are /home and /usr/local."
+msgstr ""
+
+#: ../help.pm_.c:98
+msgid ""
+"You may now select the packages you wish to install.\n"
+"\n"
+"\n"
+"First you can select group of package to install or upgrade. After that\n"
+"you can select more packages according to the total size you wish to\n"
+"select.\n"
+"\n"
+"\n"
+"If you are in expert mode, you can select packages individually.\n"
+"Please note that some packages require the installation of others.\n"
+"These are referred to as package dependencies. The packages you select,\n"
+"and the packages they require will be automatically selected for\n"
+"install. It is impossible to install a package without installing all\n"
+"of its dependencies."
+msgstr ""
+
+#: ../help.pm_.c:114
+msgid ""
+"The packages selected are now being installed. This operation\n"
+"should take a few minutes unless you have chosen to upgrade an\n"
+"existing system, in that case it can take more time even before\n"
+"upgrade starts."
+msgstr ""
+
+#: ../help.pm_.c:120
+msgid ""
+"If DrakX failed to find your mouse, or if you want to\n"
+"check what it has done, you will be presented the list of mice\n"
+"above.\n"
+"\n"
+"\n"
+"If you agree with DrakX' settings, just jump to the section\n"
+"you want by clicking on it in the menu on the left. Otherwise,\n"
+"choose a mouse type in the menu which you think is the closest\n"
+"match for your mouse.\n"
+"\n"
+"\n"
+"In case of a serial mouse, you will also have to tell DrakX\n"
+"which serial port it is connected to."
+msgstr ""
+
+#: ../help.pm_.c:135
+msgid ""
+"Please select the correct port. For example, the COM1 port in MS Windows\n"
+"is named ttyS0 in Linux."
+msgstr ""
+
+#: ../help.pm_.c:139
+msgid ""
+"This section is dedicated to configuring a local area\n"
+"network (LAN) or a modem.\n"
+"\n"
+"Choose \"Local LAN\" and DrakX will\n"
+"try to find an Ethernet adapter on your machine. PCI adapters\n"
+"should be found and initialized automatically.\n"
+"However, if your peripheral is ISA, autodetection will not work,\n"
+"and you will have to choose a driver from the list that will appear then.\n"
+"\n"
+"\n"
+"As for SCSI adapters, you can let the driver probe for the adapter\n"
+"in the first time, otherwise you will have to specify the options\n"
+"to the driver that you will have fetched from documentation of your\n"
+"hardware.\n"
+"\n"
+"\n"
+"If you install a Linux-Mandrake system on a machine which is part\n"
+"of an already existing network, the network administrator will\n"
+"have given you all necessary information (IP address, network\n"
+"submask or netmask for short, and hostname). If you're setting\n"
+"up a private network at home for example, you should choose\n"
+"addresses.\n"
+"\n"
+"\n"
+"Choose \"Dialup with modem\" and the Internet connection with\n"
+"a modem will be configured. DrakX will try to find your modem,\n"
+"if it fails you will have to select the right serial port where\n"
+"your modem is connected to."
+msgstr ""
+
+#: ../help.pm_.c:169
+msgid ""
+"Enter:\n"
+"\n"
+" - IP address: if you don't know it, ask your network administrator or "
+"ISP.\n"
+"\n"
+"\n"
+" - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
+"sure, ask your network administrator or ISP.\n"
+"\n"
+"\n"
+" - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
+"this option. If selected, no value is needed in \"IP address\". If you are\n"
+"not sure, ask your network administrator or ISP.\n"
+msgstr ""
+
+#: ../help.pm_.c:184
+msgid ""
+"You may now enter dialup options. If you're not sure what to enter, the\n"
+"correct information can be obtained from your ISP."
+msgstr ""
+
+#: ../help.pm_.c:188
+msgid ""
+"If you will use proxies, please configure them now. If you don't know if\n"
+"you will use proxies, ask your network administrator or your ISP."
+msgstr ""
+
+#: ../help.pm_.c:192
+msgid ""
+"You can install cryptographic package if your internet connection has been\n"
+"set up correctly. First choose a mirror where you wish to download packages "
+"and\n"
+"after that select the packages to install.\n"
+"\n"
+"Note you have to select mirror and cryptographic packages according\n"
+"to your legislation."
+msgstr ""
+
+#: ../help.pm_.c:200
+msgid ""
+"You can now select your timezone according to where you live.\n"
+"\n"
+"\n"
+"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
+"in local time according to the time zone you have selected."
+msgstr ""
+
+#: ../help.pm_.c:207
+msgid "Help"
+msgstr "求助"
+
+#: ../help.pm_.c:210
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer. The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+
+#: ../help.pm_.c:233
+msgid ""
+"You can now enter the root password for your Linux-Mandrake\n"
+"system. The password must be entered twice to verify that both\n"
+"password entries are identical.\n"
+"\n"
+"\n"
+"Root is the administrator of the system, and is the only user\n"
+"allowed to modify the system configuration. Therefore, choose\n"
+"this password carefully! Unauthorized use of the root account can\n"
+"be extremely dangerous to the integrity of the system and its data,\n"
+"and other systems connected to it. The password should be a\n"
+"mixture of alphanumeric characters and a least 8 characters long. It\n"
+"should *never* be written down. Do not make the password too long or\n"
+"complicated, though: you must be able to remember without too much\n"
+"effort."
+msgstr ""
+
+#: ../help.pm_.c:249
+msgid ""
+"To enable a more secure system, you should select \"Use shadow file\" and\n"
+"\"Use MD5 passwords\"."
+msgstr ""
+
+#: ../help.pm_.c:253
+msgid ""
+"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
+"network administrator."
+msgstr ""
+
+#: ../help.pm_.c:257
+msgid ""
+"You may now create one or more \"regular\" user account(s), as\n"
+"opposed to the \"privileged\" user account, root. You can create\n"
+"one or more account(s) for each person you want to allow to use\n"
+"the computer. Note that each user account will have its own\n"
+"preferences (graphical environment, program settings, etc.)\n"
+"and its own \"home directory\", in which these preferences are\n"
+"stored.\n"
+"\n"
+"\n"
+"First of all, create an account for yourself! Even if you will be the only "
+"user\n"
+"of the machine, you may NOT connect as root for daily use of the system: "
+"it's a\n"
+"very high security risk. Making the system unusable is very often a typo "
+"away.\n"
+"\n"
+"\n"
+"Therefore, you should connect to the system using the user account\n"
+"you will have created here, and login as root only for administration\n"
+"and maintenance purposes."
+msgstr ""
+
+#: ../help.pm_.c:276
+msgid ""
+"It is strongly recommended that you answer \"Yes\" here. If you install\n"
+"Microsoft Windows at a later date it will overwrite the boot sector.\n"
+"Unless you have made a bootdisk as suggested, you will not be able to\n"
+"boot into Linux any more."
+msgstr ""
+
+#: ../help.pm_.c:282
+msgid ""
+"You need to indicate where you wish\n"
+"to place the information required to boot to Linux.\n"
+"\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of\n"
+"drive (MBR)\"."
+msgstr ""
+
+#: ../help.pm_.c:290
+msgid ""
+"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
+"(the master drive on the primary channel)."
+msgstr ""
+
+#: ../help.pm_.c:294
+msgid ""
+"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
+"Normally they are correctly detected during installation. If you don't\n"
+"see yours detected, you can add one or more now.\n"
+"\n"
+"\n"
+"If you don't want that everybody could access at one of them, you can "
+"remove\n"
+"it now (a boot disk will be needed to boot it)."
+msgstr ""
+
+#: ../help.pm_.c:303
+msgid ""
+"LILO main options are:\n"
+" - Boot device: Sets the name of the device (e.g. a hard disk\n"
+"partition) that contains the boot sector. Unless you know specifically\n"
+"otherwise, choose \"/dev/hda\".\n"
+"\n"
+"\n"
+" - Linear: Generate linear sector addresses instead of\n"
+"sector/head/cylinder addresses. Linear addresses are translated at run\n"
+"time and do not depend on disk geometry. Note that boot disks may not be\n"
+"portable if \"linear\" is used, because the BIOS service to determine the\n"
+"disk geometry does not work reliably for floppy disks. When using\n"
+"\"linear\" with large disks, /sbin/lilo may generate references to\n"
+"inaccessible disk areas, because 3D sector addresses are not known\n"
+"before boot time.\n"
+"\n"
+"\n"
+" - Compact: Tries to merge read requests for adjacent sectors into a\n"
+"single read request. This drastically reduces load time and keeps the\n"
+"map smaller. Using \"compact\" is especially recommended when booting from\n"
+"a floppy disk.\n"
+"\n"
+"\n"
+" - Delay before booting default image: Specifies the number in tenths\n"
+"of a second the boot loader should wait before booting the first image.\n"
+"This is useful on systems that immediately boot from the hard disk after\n"
+"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
+"omitted or is set to zero.\n"
+"\n"
+"\n"
+" - Video mode: This specifies the VGA text mode that should be selected\n"
+"when booting. The following values are available: \n"
+" * normal: select normal 80x25 text mode.\n"
+" * <number>: use the corresponding text mode."
+msgstr ""
+
+#: ../help.pm_.c:338
+msgid ""
+"Now it's time to configure the X Window System, which is the\n"
+"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
+"you must configure your video card and monitor. Most of these\n"
+"steps are automated, though, therefore your work may only consist\n"
+"of verifying what has been done and accept the settings :)\n"
+"\n"
+"\n"
+"When the configuration is over, X will be started (unless you\n"
+"ask DrakX not to) so that you can check and see if the\n"
+"settings suit you. If they don't, you can come back and\n"
+"change them, as many times as necessary."
+msgstr ""
+
+#: ../help.pm_.c:351
+msgid ""
+"If something is wrong in X configuration, use these options to correctly\n"
+"configure the X Window System."
+msgstr ""
+
+#: ../help.pm_.c:355
+msgid ""
+"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
+"\"No\"."
+msgstr ""
+
+#: ../help.pm_.c:359
+msgid ""
+"You can now select some miscellaneous options for you system.\n"
+"\n"
+" - Use hard drive optimizations: This option can improve hard disk\n"
+"accesses but is only for advanced users, it can ruin your hard drive if\n"
+"used incorrectly. Use it only if you know how.\n"
+"\n"
+"\n"
+" - Choose security level: You can choose a security level for your\n"
+"system.\n"
+" Please refer to the manual for more information.\n"
+"\n"
+"\n"
+" - Precise RAM size if needed: In some cases, Linux is unable to\n"
+"correctly detect all the installed RAM on some systems. If this is the\n"
+"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
+"normal.\n"
+"\n"
+"\n"
+" - Removable media automounting: If you would prefer not to manually\n"
+"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
+"\"umount\", select this option. \n"
+"\n"
+"\n"
+" - Enable Num Lock at startup: If you want Number Lock enabled after\n"
+"booting, select this option (Note: Num Lock will still not work under\n"
+"X)."
+msgstr ""
+
+#: ../help.pm_.c:387
+msgid ""
+"Your system is going to reboot.\n"
+"\n"
+"After rebooting, your new Linux Mandrake system will load automatically.\n"
+"If you want to boot into another existing operating system, please read\n"
+"the additional instructions."
+msgstr ""
+"在重新开机之后,您新的 Mandrake Linux 系统将会自动载入。\n"
+"如果您想要开机至其他作业系统,请参考更多的指示。"
+
+#: ../install2.pm_.c:43
+msgid "Choose your language"
+msgstr "请选择您使用的语系"
+
+#: ../install2.pm_.c:44
+msgid "Select installation class"
+msgstr "请选择想要安装的类别"
+
+#: ../install2.pm_.c:45
+msgid "Setup SCSI"
+msgstr "设定 SCSI"
+
+#: ../install2.pm_.c:46
+msgid "Choose install or upgrade"
+msgstr "选择安装新系统或升级原有系统"
+
+#: ../install2.pm_.c:47
+msgid "Configure mouse"
+msgstr "设定滑鼠"
+
+#: ../install2.pm_.c:48
+msgid "Choose your keyboard"
+msgstr "选取您使用的键盘形式"
+
+#: ../install2.pm_.c:49
+msgid "Miscellaneous"
+msgstr "杂项"
+
+#: ../install2.pm_.c:50
+msgid "Setup filesystems"
+msgstr "设定档案系统"
+
+#: ../install2.pm_.c:51
+msgid "Format partitions"
+msgstr "格式化硬碟分割区"
+
+#: ../install2.pm_.c:52
+msgid "Choose packages to install"
+msgstr "选取要安装的程式套件"
+
+#: ../install2.pm_.c:53
+msgid "Install system"
+msgstr "安装系统"
+
+#: ../install2.pm_.c:54
+msgid "Configure networking"
+msgstr "设定网路连线"
+
+#: ../install2.pm_.c:55
+msgid "Cryptographic"
+msgstr "密码编码"
+
+#: ../install2.pm_.c:56
+msgid "Configure timezone"
+msgstr "设定时区"
+
+#: ../install2.pm_.c:58
+msgid "Configure printer"
+msgstr "设定印表机"
+
+#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:577
+msgid "Set root password"
+msgstr "设定 root 密码"
+
+#: ../install2.pm_.c:60
+msgid "Add a user"
+msgstr "增加一个一般使用者"
+
+#: ../install2.pm_.c:61
+msgid "Create a bootdisk"
+msgstr "制作一张开机磁片"
+
+#: ../install2.pm_.c:62
+msgid "Install bootloader"
+msgstr "安装开机启动程式"
+
+#: ../install2.pm_.c:63
+msgid "Configure X"
+msgstr "设定 X"
+
+#: ../install2.pm_.c:64
+msgid "Exit install"
+msgstr "离开安装程式"
+
+#: ../install2.pm_.c:83
+msgid "beginner"
+msgstr "一般初学者"
+
+#: ../install2.pm_.c:83
+msgid "developer"
+msgstr "程式开发者"
+
+#: ../install2.pm_.c:83
+msgid "expert"
+msgstr "系统专家"
+
+#: ../install2.pm_.c:83
+msgid "server"
+msgstr "伺服器"
+
+#: ../install2.pm_.c:311
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+
+#: ../install2.pm_.c:327
+msgid "Not enough swap to fulfill installation, please add some"
+msgstr ""
+
+#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+
+#: ../install_any.pm_.c:210
+msgid ""
+"DiskDrake failed to read correctly the partition table.\n"
+"Continue at your own risk!"
+msgstr ""
+
+#: ../install_any.pm_.c:220
+msgid "Searching root partition."
+msgstr ""
+
+#: ../install_any.pm_.c:249
+#, fuzzy
+msgid "Information"
+msgstr "显示所有资讯"
+
+#: ../install_any.pm_.c:250
+#, c-format
+msgid "%s: This is not a root partition, please select another one."
+msgstr ""
+
+#: ../install_any.pm_.c:252
+#, fuzzy
+msgid "No root partition found"
+msgstr "格式化硬碟分割区"
+
+#: ../install_any.pm_.c:289
+msgid "Can't use broadcast with no NIS domain"
+msgstr ""
+
+#: ../install_any.pm_.c:473
+msgid "Error reading file $f"
+msgstr ""
+
+#: ../install_any.pm_.c:479
+#, c-format
+msgid "Bad kickstart file %s (failed %s)"
+msgstr ""
+
+#: ../install_steps.pm_.c:72
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+
+#: ../install_steps.pm_.c:136
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr ""
+
+#: ../install_steps.pm_.c:295
+#, fuzzy, c-format
+msgid "Welcome to %s"
+msgstr "欢迎来到 Crackers"
+
+#: ../install_steps.pm_.c:562
+msgid "No floppy drive available"
+msgstr ""
+
+#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:294
+msgid "You must have a swap partition"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:296
+msgid ""
+"You don't have a swap partition\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:317
+#, fuzzy
+msgid "Choose the size you want to install"
+msgstr "选取要安装的程式套件"
+
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:361
+msgid "Total size: "
+msgstr "总共大小:"
+
+#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:373
+#: ../standalone/rpmdrake_.c:136
+#, c-format
+msgid "Version: %s\n"
+msgstr "版本: %s\n"
+
+#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:374
+#: ../standalone/rpmdrake_.c:137
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "大小: %d KB\n"
+
+#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:489
+#, fuzzy
+msgid "Choose the packages you want to install"
+msgstr "选取要安装的程式套件"
+
+#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:492
+msgid "Info"
+msgstr "资讯"
+
+#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:500
+#: ../install_steps_interactive.pm_.c:81 ../standalone/rpmdrake_.c:161
+msgid "Install"
+msgstr "安装"
+
+#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:519
+#: ../install_steps_interactive.pm_.c:317
+msgid "Installing"
+msgstr "安装"
+
+#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:526
+msgid "Please wait, "
+msgstr "请稍候"
+
+#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:528
+msgid "Time remaining "
+msgstr "还需时间"
+
+#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:529
+msgid "Total time "
+msgstr "总共时间"
+
+#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:534
+#: ../install_steps_interactive.pm_.c:317
+#, fuzzy
+msgid "Preparing installation"
+msgstr "正在准备 X-Window 的设定"
+
+#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:549
+#, c-format
+msgid "Installing package %s"
+msgstr "安装程式"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "Go on anyway?"
+msgstr "仍然继续"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "There was an error ordering packages:"
+msgstr "安装程式时有错误"
+
+#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:893
+#, fuzzy
+msgid "Use existing configuration for X11?"
+msgstr "测试设定值"
+
+#: ../install_steps_gtk.pm_.c:259
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX now needs to resize your Windows partition. Be careful: this operation "
+"is\n"
+"dangerous. If you have not already done so, you should first exit the\n"
+"installation, run scandisk under Windows (and optionally run defrag), then\n"
+"restart the installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+
+#: ../install_steps_gtk.pm_.c:278
+#, fuzzy
+msgid "Automatic resizing failed"
+msgstr "自动设定解析度"
+
+#: ../install_steps_gtk.pm_.c:312
+msgid ""
+"Now that you've selected desired groups, please choose \n"
+"how many packages you want, ranging from minimal to full \n"
+"installation of each selected groups."
+msgstr ""
+
+#: ../install_steps_gtk.pm_.c:315
+msgid "You will be able to choose more precisely in next step"
+msgstr "下一个步骤你将可以更仔细的选择"
+
+#: ../install_steps_gtk.pm_.c:372
+msgid "Bad package"
+msgstr "无效的程式"
+
+#: ../install_steps_gtk.pm_.c:522
+msgid "Estimating"
+msgstr "推测"
+
+#: ../install_steps_gtk.pm_.c:544
+#, c-format
+msgid "%d packages"
+msgstr "%d 程式"
+
+#: ../install_steps_gtk.pm_.c:544
+msgid ", %U MB"
+msgstr ", %U MB"
+
+#: ../install_steps_interactive.pm_.c:37
+#, fuzzy
+msgid "An error occurred"
+msgstr "发生错误∶"
+
+#: ../install_steps_interactive.pm_.c:54
+#, fuzzy
+msgid "Which language do you want?"
+msgstr "您打算怎么作 ?"
+
+#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
+msgid "Keyboard"
+msgstr "键盘"
+
+#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
+#, fuzzy
+msgid "What is your keyboard layout?"
+msgstr "选取您使用的键盘形式"
+
+#: ../install_steps_interactive.pm_.c:79
+#, fuzzy
+msgid "Install/Upgrade"
+msgstr "安装开机启动程式"
+
+#: ../install_steps_interactive.pm_.c:80
+#, fuzzy
+msgid "Is this an install or an upgrade?"
+msgstr "选择安装新系统或升级原有系统"
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Upgrade"
+msgstr "升级"
+
+#: ../install_steps_interactive.pm_.c:89
+#, fuzzy
+msgid "Root Partition"
+msgstr "根分割区"
+
+#: ../install_steps_interactive.pm_.c:90
+msgid "What is the root partition (/) of your system?"
+msgstr "您的根分割区(/)是那一个 ?"
+
+#: ../install_steps_interactive.pm_.c:100
+msgid "Recommended"
+msgstr "建议"
+
+#: ../install_steps_interactive.pm_.c:101
+msgid "Customized"
+msgstr "自行设定"
+
+#: ../install_steps_interactive.pm_.c:102
+#, fuzzy
+msgid "Expert"
+msgstr "系统专家"
+
+#: ../install_steps_interactive.pm_.c:104
+#: ../install_steps_interactive.pm_.c:118
+#, fuzzy
+msgid "Install Class"
+msgstr "安装系统"
+
+#: ../install_steps_interactive.pm_.c:105
+#, fuzzy
+msgid "What installation class do you want?"
+msgstr "请选择想要安装的类别"
+
+#: ../install_steps_interactive.pm_.c:114
+#, fuzzy
+msgid "Normal"
+msgstr "格式化"
+
+#: ../install_steps_interactive.pm_.c:115
+#, fuzzy
+msgid "Development"
+msgstr "程式开发者"
+
+#: ../install_steps_interactive.pm_.c:116
+#, fuzzy
+msgid "Server"
+msgstr "伺服器"
+
+#: ../install_steps_interactive.pm_.c:119
+#, fuzzy
+msgid "What usage do you want?"
+msgstr "您打算怎么作 ?"
+
+#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
+msgid "What is the type of your mouse?"
+msgstr "请问您的滑鼠是那一种型式 ?"
+
+#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
+msgid "Mouse Port"
+msgstr "滑鼠连接埠"
+
+#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
+msgid "Which serial port is your mouse connected to?"
+msgstr "您的滑鼠是连接到那个序列埠 ?"
+
+#: ../install_steps_interactive.pm_.c:157
+#, fuzzy
+msgid "no available partitions"
+msgstr "格式化硬碟分割区"
+
+#: ../install_steps_interactive.pm_.c:159
+#, c-format
+msgid "(%dMb)"
+msgstr "%dMB"
+
+#: ../install_steps_interactive.pm_.c:166
+msgid "Which partition do you want to use as your root partition"
+msgstr "请问您要用那一个分割区做为您的根分割区 ?"
+
+#: ../install_steps_interactive.pm_.c:173
+#, fuzzy
+msgid "Choose the mount points"
+msgstr "选取合适的萤幕"
+
+#: ../install_steps_interactive.pm_.c:185
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "你将需要重新启动使改变生效"
+
+#: ../install_steps_interactive.pm_.c:207
+msgid "Choose the partitions you want to format"
+msgstr "请选择您要格式化的分割区"
+
+#: ../install_steps_interactive.pm_.c:211
+msgid "Check bad blocks?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:230
+msgid "Looking for available packages"
+msgstr "寻找可安装的程式"
+
+#: ../install_steps_interactive.pm_.c:236
+msgid "Finding packages to upgrade"
+msgstr "寻程式以升级"
+
+#: ../install_steps_interactive.pm_.c:266
+#, c-format
+msgid ""
+"You need %dMB for a full install of the groups you selected.\n"
+"You can go on anyway, but be warned that you won't get all packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:290
+msgid "Package Group Selection"
+msgstr "程式群组选择"
+
+#: ../install_steps_interactive.pm_.c:326
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr "安装程式"
+
+#: ../install_steps_interactive.pm_.c:335
+#, fuzzy
+msgid "Post install configuration"
+msgstr "测试设定值"
+
+#: ../install_steps_interactive.pm_.c:346
+#, fuzzy
+msgid "Keep the current IP configuration"
+msgstr "测试设定值"
+
+#: ../install_steps_interactive.pm_.c:347
+#, fuzzy
+msgid "Reconfigure network now"
+msgstr "设定网路连线"
+
+#: ../install_steps_interactive.pm_.c:348
+#: ../install_steps_interactive.pm_.c:360
+#, fuzzy
+msgid "Do not set up networking"
+msgstr "设定网路连线"
+
+#: ../install_steps_interactive.pm_.c:350
+#: ../install_steps_interactive.pm_.c:358
+#, fuzzy
+msgid "Network Configuration"
+msgstr "测试设定值"
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Local networking has already been configured. Do you want to:"
+msgstr "区域网路已经设定好。请问您想要 :"
+
+#: ../install_steps_interactive.pm_.c:359
+#, fuzzy
+msgid "Do you want to configure networking for your system?"
+msgstr "您想要测试您的设定值吗 ?"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Dialup with modem"
+msgstr "使用数据机播接上网"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Local LAN"
+msgstr "区域网路"
+
+#: ../install_steps_interactive.pm_.c:369
+msgid "no network card found"
+msgstr "找不到网路卡"
+
+#: ../install_steps_interactive.pm_.c:399
+#: ../install_steps_interactive.pm_.c:400
+#, fuzzy, c-format
+msgid "Configuring network device %s"
+msgstr "设定网路连线"
+
+#: ../install_steps_interactive.pm_.c:401
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr "请输入您电脑的 IP 设定请以 . 分隔,例如 1.2.3.4 "
+
+#: ../install_steps_interactive.pm_.c:404
+#, fuzzy
+msgid "Automatic IP"
+msgstr "自动设定解析度"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "IP address:"
+msgstr "IP 位置"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Netmask:"
+msgstr "Netmask:"
+
+#: ../install_steps_interactive.pm_.c:405
+msgid "(bootp/dhcp)"
+msgstr "(bootp/dhcp)"
+
+#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP 位置的格式应该是 1.2.3.4"
+
+#: ../install_steps_interactive.pm_.c:429
+#, fuzzy
+msgid "Configuring network"
+msgstr "设定网路连线"
+
+#: ../install_steps_interactive.pm_.c:430
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one"
+msgstr ""
+"请输入您机器的名称\n"
+"你的机器名称必需是个合法的名称,例如 ``mybox.mylab.myco.com''\n"
+"如果你有通讯闸的话,也请输入其 IP 位置"
+
+#: ../install_steps_interactive.pm_.c:434
+#, fuzzy
+msgid "DNS server:"
+msgstr "名称伺服器"
+
+#: ../install_steps_interactive.pm_.c:434
+#, fuzzy
+msgid "Gateway device:"
+msgstr "通讯闸装置"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway:"
+msgstr "通讯闸"
+
+#: ../install_steps_interactive.pm_.c:434
+#, fuzzy
+msgid "Host name:"
+msgstr "机器名称:"
+
+#: ../install_steps_interactive.pm_.c:447
+#, fuzzy
+msgid "Try to find a modem?"
+msgstr "尝试寻找数据机"
+
+#: ../install_steps_interactive.pm_.c:457
+msgid "Which serial port is your modem connected to?"
+msgstr "请问您的数据机是连接到那个序列埠 ?"
+
+#: ../install_steps_interactive.pm_.c:462
+msgid "Dialup options"
+msgstr "播接选项"
+
+#: ../install_steps_interactive.pm_.c:463
+msgid "Connection name"
+msgstr "连接名称"
+
+#: ../install_steps_interactive.pm_.c:464
+msgid "Phone number"
+msgstr "电话号码"
+
+#: ../install_steps_interactive.pm_.c:465
+msgid "Login ID"
+msgstr "登录帐号"
+
+#: ../install_steps_interactive.pm_.c:466
+#: ../install_steps_interactive.pm_.c:578
+#: ../install_steps_interactive.pm_.c:624
+#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
+msgid "Password"
+msgstr "密码"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Authentication"
+msgstr "授权"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "PAP"
+msgstr "PAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Script-based"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Terminal-based"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:468
+#, fuzzy
+msgid "Domain name"
+msgstr "网域名称"
+
+#: ../install_steps_interactive.pm_.c:469
+msgid "First DNS Server"
+msgstr "第一个名称伺服器"
+
+#: ../install_steps_interactive.pm_.c:470
+msgid "Second DNS Server"
+msgstr "第二个名称伺服器"
+
+#: ../install_steps_interactive.pm_.c:483
+#, fuzzy
+msgid "Bringing up the network"
+msgstr "设定网路连线"
+
+#: ../install_steps_interactive.pm_.c:492
+msgid ""
+"You have now the possibility to download software aimed for encryption.\n"
+"\n"
+"WARNING:\n"
+"\n"
+"Due to different general requirements applicable to these software and "
+"imposed\n"
+"by various jurisdictions, customer and/or end user of theses software "
+"should\n"
+"ensure that the laws of his/their jurisdiction allow him/them to download, "
+"stock\n"
+"and/or use these software.\n"
+"\n"
+"In addition customer and/or end user shall particularly be aware to not "
+"infringe\n"
+"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
+"respect the provision of these applicable laws, he/they will incur serious\n"
+"sanctions.\n"
+"\n"
+"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
+"liable\n"
+"for special, indirect or incidental damages whatsoever (including, but not\n"
+"limited to loss of profits, business interruption, loss of commercial data "
+"and\n"
+"other pecuniary losses, and eventual liabilities and indemnification to be "
+"paid\n"
+"pursuant to a court decision) arising out of use, possession, or the sole\n"
+"downloading of these software, to which customer and/or end user could\n"
+"eventually have access after having sign up the present agreement.\n"
+"\n"
+"\n"
+"For any queries relating to these agreement, please contact \n"
+"Mandrakesoft, Inc.\n"
+"2400 N. Lincoln Avenue Suite 243\n"
+"Altadena California 91001\n"
+"USA"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:523
+msgid "Choose a mirror from which to get the packages"
+msgstr "选择一个 mirror 站台来取得程式"
+
+#: ../install_steps_interactive.pm_.c:528
+msgid "Contacting the mirror to get the list of available packages"
+msgstr "连接 mirror 站台以取得可供安装程式的列表"
+
+#: ../install_steps_interactive.pm_.c:532
+#, fuzzy
+msgid "Which packages do you want to install"
+msgstr "选取要安装的程式套件"
+
+#: ../install_steps_interactive.pm_.c:534
+msgid "Downloading cryptographic packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:544
+msgid "Which is your timezone?"
+msgstr "请问您的时区是 ?"
+
+#: ../install_steps_interactive.pm_.c:545
+msgid "Is your hardware clock set to GMT?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:555
+#, fuzzy
+msgid "Printer"
+msgstr "装置:"
+
+#: ../install_steps_interactive.pm_.c:556
+msgid "Would you like to configure a printer?"
+msgstr "您想要设定印表机吗 ?"
+
+#: ../install_steps_interactive.pm_.c:576
+#, fuzzy
+msgid "No password"
+msgstr "设定 root 密码"
+
+#: ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
+#: ../my_gtk.pm_.c:525
+msgid "Ok"
+msgstr "确定"
+
+#: ../install_steps_interactive.pm_.c:579
+#: ../install_steps_interactive.pm_.c:625
+#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
+msgid "Password (again)"
+msgstr "密码"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "Use shadow file"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "shadow"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "MD5"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:582
+#, fuzzy
+msgid "Use MD5 passwords"
+msgstr "设定 root 密码"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "Use NIS"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "yellow pages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+#, fuzzy
+msgid "Please try again"
+msgstr "再次测试设定值"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "The passwords do not match"
+msgstr "密码不同"
+
+#: ../install_steps_interactive.pm_.c:590
+#, c-format
+msgid "This password is too simple (must be at least %d characters long)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:597
+msgid "Authentification NIS"
+msgstr "授权的 NIS"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Domain"
+msgstr "NIS 网域"
+
+#: ../install_steps_interactive.pm_.c:598
+#, fuzzy
+msgid "NIS Server"
+msgstr "NIS 伺服器"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Accept user"
+msgstr "接受使用者"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+#, fuzzy
+msgid "Add user"
+msgstr "增加一个一般使用者"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid "(already added %s)"
+msgstr "(已经增加了 %s)"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"请输入一个使用者\n"
+"%s"
+
+#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
+#, fuzzy
+msgid "Real name"
+msgstr "更新"
+
+#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
+#, fuzzy
+msgid "User name"
+msgstr "更新"
+
+#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
+#, fuzzy
+msgid "Shell"
+msgstr "显示全部"
+
+#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
+msgid "This password is too simple"
+msgstr "密码太简单"
+
+#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
+msgid "Please give a user name"
+msgstr "请输入使用使用者名称"
+
+#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "使用者名称只能有小写字母、数字,`-' 和 `_'"
+
+#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
+msgid "This user name is already added"
+msgstr "这个使用者名称已经有了"
+
+#: ../install_steps_interactive.pm_.c:659
+#, fuzzy
+msgid "First drive"
+msgstr "第一个名称伺服器"
+
+#: ../install_steps_interactive.pm_.c:660
+#, fuzzy
+msgid "Second drive"
+msgstr "第二个名称伺服器"
+
+#: ../install_steps_interactive.pm_.c:661
+msgid "Skip"
+msgstr "略过"
+
+#: ../install_steps_interactive.pm_.c:666
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO on your system, or another operating system removes LILO, or LILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:675
+msgid "Sorry, no floppy drive available"
+msgstr "抱歉,您没有软碟机"
+
+#: ../install_steps_interactive.pm_.c:678
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "选择您要制作开机磁片的软碟机"
+
+#: ../install_steps_interactive.pm_.c:683
+#, c-format
+msgid "Insert a floppy in drive %s"
+msgstr "请插入一张磁片"
+
+#: ../install_steps_interactive.pm_.c:684
+#: ../install_steps_interactive.pm_.c:1042
+#, fuzzy
+msgid "Creating bootdisk"
+msgstr "制作一张开机磁片"
+
+#: ../install_steps_interactive.pm_.c:691
+#, fuzzy
+msgid "Preparing bootloader"
+msgstr "安装开机启动程式"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of boot partition"
+msgstr "开机分割区的第一轨"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of drive (MBR)"
+msgstr "磁碟机的第一轨 (MBR)"
+
+#: ../install_steps_interactive.pm_.c:708
+msgid "LILO Installation"
+msgstr "LILO 安装"
+
+#: ../install_steps_interactive.pm_.c:709
+#, fuzzy
+msgid "Where do you want to install the bootloader?"
+msgstr "您想要测试您的设定值吗 ?"
+
+#: ../install_steps_interactive.pm_.c:715
+#, fuzzy
+msgid "Do you want to use LILO?"
+msgstr "您打算怎么作 ?"
+
+#: ../install_steps_interactive.pm_.c:718
+#, fuzzy
+msgid "Boot device"
+msgstr "缺少输入装置"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "Linear (needed for some SCSI drives)"
+msgstr " 线性 (需要一些 SCSI 装置)"
+
+#: ../install_steps_interactive.pm_.c:719
+#, fuzzy
+msgid "linear"
+msgstr "线性"
+
+#: ../install_steps_interactive.pm_.c:720
+#, fuzzy
+msgid "Compact"
+msgstr "格式化"
+
+#: ../install_steps_interactive.pm_.c:720
+#, fuzzy
+msgid "compact"
+msgstr "格式化"
+
+#: ../install_steps_interactive.pm_.c:721
+msgid "Delay before booting default image"
+msgstr "开机等候时间"
+
+#: ../install_steps_interactive.pm_.c:722
+msgid "Video mode"
+msgstr "萤幕模式"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "Restrict command line options"
+msgstr "限定参数选项"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "restrict"
+msgstr "限定"
+
+#: ../install_steps_interactive.pm_.c:732
+msgid "LILO main options"
+msgstr "LILO 主选项"
+
+#: ../install_steps_interactive.pm_.c:735
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "没有密码不能使用 ``限定参数选项''"
+
+#: ../install_steps_interactive.pm_.c:746
+msgid ""
+"Here are the following entries in LILO.\n"
+"You can add some more or change the existing ones."
+msgstr "您可以增加或是更改已存在的选项"
+
+#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
+msgid "Add"
+msgstr "增加"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Linux"
+msgstr "Linux"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Other OS (windows...)"
+msgstr "其他作业系统 (windows...)"
+
+#: ../install_steps_interactive.pm_.c:757
+#, fuzzy
+msgid "Which type of entry do you want to add"
+msgstr "您打算怎么作 ?"
+
+#: ../install_steps_interactive.pm_.c:777
+msgid "Image"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:778
+#: ../install_steps_interactive.pm_.c:786
+msgid "Root"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:779
+msgid "Append"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:780
+msgid "Initrd"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:781
+msgid "Read-write"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:787
+#, fuzzy
+msgid "Table"
+msgstr "可缩放"
+
+#: ../install_steps_interactive.pm_.c:788
+msgid "Unsafe"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:793
+msgid "Label"
+msgstr "名称"
+
+#: ../install_steps_interactive.pm_.c:795
+#, fuzzy
+msgid "Default"
+msgstr "删除"
+
+#: ../install_steps_interactive.pm_.c:798
+msgid "Remove entry"
+msgstr "移除选项"
+
+#: ../install_steps_interactive.pm_.c:801
+msgid "Empty label not allowed"
+msgstr "不能有空的名称"
+
+#: ../install_steps_interactive.pm_.c:802
+msgid "This label is already in use"
+msgstr "这个名称已经有使用了"
+
+#: ../install_steps_interactive.pm_.c:803
+#, c-format
+msgid "A entry %s already exists"
+msgstr "这个项目 %s 已经存在了"
+
+#: ../install_steps_interactive.pm_.c:817
+msgid "Installation of LILO failed. The following error occured:"
+msgstr "安装 LILO 失败,出现下列错误:"
+
+#: ../install_steps_interactive.pm_.c:831
+msgid "Proxies configuration"
+msgstr "代理伺服器设定"
+
+#: ../install_steps_interactive.pm_.c:832
+msgid "HTTP proxy"
+msgstr "HTTP 代理伺服器"
+
+#: ../install_steps_interactive.pm_.c:833
+msgid "FTP proxy"
+msgstr "FTP 代理伺服器"
+
+#: ../install_steps_interactive.pm_.c:839
+msgid "Proxy should be http://..."
+msgstr "代理伺服器应该是象 http://..."
+
+#: ../install_steps_interactive.pm_.c:840
+msgid "Proxy should be ftp://..."
+msgstr "代理伺服器应该是象 ftp://..."
+
+#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
+msgid "Welcome To Crackers"
+msgstr "欢迎来到 Crackers"
+
+#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
+msgid "Poor"
+msgstr "差"
+
+#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
+msgid "Low"
+msgstr "低"
+
+#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
+msgid "Medium"
+msgstr "中"
+
+#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
+msgid "High"
+msgstr "高"
+
+#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
+msgid "Paranoid"
+msgstr "偏执"
+
+#: ../install_steps_interactive.pm_.c:868
+msgid "Miscellaneous questions"
+msgstr "其他问题"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "(may cause data corruption)"
+msgstr "(可能会导致资料损毁)"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "Use hard drive optimisations?"
+msgstr "使用硬碟最佳化"
+
+#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
+msgid "Choose security level"
+msgstr "选择安全层级"
+
+#: ../install_steps_interactive.pm_.c:871
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "精确的记忆体大小(如果需要的话) (找到 %dMB)"
+
+#: ../install_steps_interactive.pm_.c:872
+msgid "Removable media automounting"
+msgstr "移除媒体自动安插"
+
+#: ../install_steps_interactive.pm_.c:874
+msgid "Enable num lock at startup"
+msgstr "开机时打亭 num lock"
+
+#: ../install_steps_interactive.pm_.c:877
+msgid "Give the ram size in Mb"
+msgstr "用 Mb 指定记忆体大小"
+
+#: ../install_steps_interactive.pm_.c:905
+#: ../install_steps_interactive.pm_.c:1075
+#, fuzzy
+msgid "Try to find PCI devices?"
+msgstr "尝试寻找 PCI 装置 ?"
+
+#: ../install_steps_interactive.pm_.c:920
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"有些步骤并不完全\n"
+"您想要现在就离开吗 ?"
+
+#: ../install_steps_interactive.pm_.c:927
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"For information on fixes which are available for this release of "
+"Linux-Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux-Mandrake User's Guide."
+msgstr ""
+"恭喜 ! 安装完成!\n"
+"请移除开机的光碟或磁片,并按下 return 以重新开机。\n"
+"您可以到 http://www.linux-mandrake.com/ 找到更多讯息\n"
+"如何设定请参考 Official Linux-Mandrake 使用者手册的 post install 这一章"
+
+#: ../install_steps_interactive.pm_.c:936
+msgid "Shutting down"
+msgstr "关机"
+
+#: ../install_steps_interactive.pm_.c:950
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr "安装 %s 卡的驱动程式"
+
+#: ../install_steps_interactive.pm_.c:951
+#, c-format
+msgid "(module %s)"
+msgstr "(模组 %s)"
+
+#: ../install_steps_interactive.pm_.c:961
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "请问要尝试那个驱动程式 ?"
+
+#: ../install_steps_interactive.pm_.c:969
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Autoprobe"
+msgstr "自动侦测"
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Specify options"
+msgstr "指定参数"
+
+#: ../install_steps_interactive.pm_.c:978
+#, c-format
+msgid "You may now provide its options to module %s."
+msgstr "您可以提供此模组的参数"
+
+#: ../install_steps_interactive.pm_.c:984
+#, c-format
+msgid ""
+"You may now provide its options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"你可以提供此模组的参数。格式是 ``name=value name2=value2...'' \n"
+"例如, ``io=0x300 irq=7''"
+
+#: ../install_steps_interactive.pm_.c:987
+msgid "Module options:"
+msgstr "模组参数"
+
+#: ../install_steps_interactive.pm_.c:997
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr "您要尝试其他的参数吗 ?"
+
+#: ../install_steps_interactive.pm_.c:1010
+msgid "Try to find PCMCIA cards?"
+msgstr "尝式寻找 PCMCIA 配接卡"
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "Configuring PCMCIA cards..."
+msgstr "设定PCMCIA 配接卡"
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../install_steps_interactive.pm_.c:1018
+msgid ""
+"Linux does not yet fully support ultra dma 66 HPT.\n"
+"As a work-around i can make a custom floppy giving access the hard drive on "
+"ide2 and ide3"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1039
+#, fuzzy
+msgid ""
+"Enter a floppy to create an HTP enabled boot\n"
+"(all data on floppy will be lost)"
+msgstr ""
+"请插入一张磁片\n"
+"所有在这个分割区上的资料都会被清除"
+
+#: ../install_steps_interactive.pm_.c:1056
+msgid "It is necessary to restart installation booting on the floppy"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1057
+msgid "It is necessary to restart installation with the new parameters"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1061
+#, c-format
+msgid ""
+"Failed to create an HTP boot floppy.\n"
+"You may have to restart installation and give ``%s'' at the prompt"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1081
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr "找到 %s %s 介面"
+
+#: ../install_steps_interactive.pm_.c:1082
+msgid "Do you have another one?"
+msgstr "您有其他的配接卡吗 ?"
+
+#: ../install_steps_interactive.pm_.c:1083
+#, c-format
+msgid "Do you have any %s interface?"
+msgstr "您还有其他 % 介面吗 ?"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
+msgid "No"
+msgstr "没有"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424
+msgid "Yes"
+msgstr "有"
+
+#: ../install_steps_interactive.pm_.c:1086
+msgid "See hardware info"
+msgstr "参考硬体资讯"
+
+#: ../install_steps_newt.pm_.c:19
+#, c-format
+msgid "Linux-Mandrake Installation %s"
+msgstr "Linux-Mandrake 安装"
+
+#: ../install_steps_newt.pm_.c:30
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr " <Tab>/<Alt-Tab> 选项与选项间 | <Space> 选择 | <F12> 下个画面 "
+
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
+msgid "Cancel"
+msgstr "取消"
+
+#: ../interactive.pm_.c:181
+msgid "Please wait"
+msgstr "请稍候"
+
+#: ../interactive_stdio.pm_.c:35
+#, c-format
+msgid "Ambiguity (%s), be more precise\n"
+msgstr "含糊不清 (%s) ,请更精确\n"
+
+#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
+#: ../interactive_stdio.pm_.c:70
+msgid "Bad choice, try again\n"
+msgstr "确误的选择,请重试\n"
+
+#: ../interactive_stdio.pm_.c:39
+#, c-format
+msgid " ? (default %s) "
+msgstr "? (内定 %s) "
+
+#: ../interactive_stdio.pm_.c:52
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "您的选择 ? (内定 %s) "
+
+#: ../interactive_stdio.pm_.c:71
+#, c-format
+msgid "Your choice? (default %s enter `none' for none) "
+msgstr "你的选择 ? (内定 %s 输入 `none' 如果没有的话) "
+
+#: ../keyboard.pm_.c:88
+#, fuzzy
+msgid "Armenian"
+msgstr "罗马体"
+
+#: ../keyboard.pm_.c:89
+msgid "Belgian"
+msgstr ""
+
+#: ../keyboard.pm_.c:90
+msgid "Bulgarian"
+msgstr ""
+
+#: ../keyboard.pm_.c:91
+msgid "Brazilian"
+msgstr ""
+
+#: ../keyboard.pm_.c:92
+msgid "Swiss (French layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:93
+msgid "Swiss (German layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:94
+msgid "Czech"
+msgstr ""
+
+#: ../keyboard.pm_.c:95
+#, fuzzy
+msgid "German"
+msgstr "罗马体"
+
+#: ../keyboard.pm_.c:96
+msgid "Danish"
+msgstr ""
+
+#: ../keyboard.pm_.c:97
+msgid "Dvorak"
+msgstr ""
+
+#: ../keyboard.pm_.c:98
+msgid "Estonian"
+msgstr ""
+
+#: ../keyboard.pm_.c:99
+msgid "Spanish"
+msgstr ""
+
+#: ../keyboard.pm_.c:100
+msgid "Finnish"
+msgstr ""
+
+#: ../keyboard.pm_.c:101
+msgid "French"
+msgstr ""
+
+#: ../keyboard.pm_.c:102
+msgid "Georgian (\"Russian\" layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:103
+msgid "Georgian (\"Latin\" layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:104
+#, fuzzy
+msgid "Greek"
+msgstr "绿:"
+
+#: ../keyboard.pm_.c:105
+msgid "Hungarian"
+msgstr ""
+
+#: ../keyboard.pm_.c:106
+msgid "Israeli"
+msgstr ""
+
+#: ../keyboard.pm_.c:107
+msgid "Israeli (Phonetic)"
+msgstr ""
+
+#: ../keyboard.pm_.c:108
+msgid "Icelandic"
+msgstr ""
+
+#: ../keyboard.pm_.c:109
+#, fuzzy
+msgid "Italian"
+msgstr "斜体"
+
+#: ../keyboard.pm_.c:110
+msgid "Latin American"
+msgstr ""
+
+#: ../keyboard.pm_.c:111
+msgid "Dutch"
+msgstr ""
+
+#: ../keyboard.pm_.c:112
+msgid "Lithuanian AZERTY"
+msgstr ""
+
+#: ../keyboard.pm_.c:113
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
+#: ../keyboard.pm_.c:114
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
+
+#: ../keyboard.pm_.c:115
+msgid "Norwegian"
+msgstr ""
+
+#: ../keyboard.pm_.c:116
+msgid "Polish (qwerty layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:117
+msgid "Polish (qwertz layout)"
+msgstr ""
+
+#: ../keyboard.pm_.c:118
+msgid "Portuguese"
+msgstr ""
+
+#: ../keyboard.pm_.c:119
+msgid "Canadian (Quebec)"
+msgstr ""
+
+#: ../keyboard.pm_.c:120
+msgid "Russian"
+msgstr ""
+
+#: ../keyboard.pm_.c:121
+msgid "Russian (Yawerty)"
+msgstr ""
+
+#: ../keyboard.pm_.c:122
+msgid "Swedish"
+msgstr ""
+
+#: ../keyboard.pm_.c:123
+msgid "Slovenian"
+msgstr ""
+
+#: ../keyboard.pm_.c:124
+msgid "Slovakian"
+msgstr ""
+
+#: ../keyboard.pm_.c:125
+msgid "Thai keyboard"
+msgstr ""
+
+#: ../keyboard.pm_.c:126
+msgid "Turkish (traditional \"F\" model)"
+msgstr ""
+
+#: ../keyboard.pm_.c:127
+msgid "Turkish (modern \"Q\" model)"
+msgstr ""
+
+#: ../keyboard.pm_.c:128
+msgid "Ukrainian"
+msgstr ""
+
+#: ../keyboard.pm_.c:129
+msgid "UK keyboard"
+msgstr ""
+
+#: ../keyboard.pm_.c:130
+msgid "US keyboard"
+msgstr ""
+
+#: ../keyboard.pm_.c:131
+msgid "US keyboard (international)"
+msgstr ""
+
+#: ../keyboard.pm_.c:132
+msgid "Yugoslavian (latin layout)"
+msgstr ""
+
+# NOTE: this message will be displayed by lilo at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# When possible cp437 accentuated letters can be used too.
+#
+#: ../lilo.pm_.c:145
+#, c-format
+msgid ""
+"Welcome to LILO the operating system chooser!\n"
+"\n"
+"To list the possible choices, press <TAB>.\n"
+"\n"
+"To load one of them, write its name and press <ENTER> or wait %d seconds for "
+"default boot.\n"
+"\n"
+msgstr ""
+
+#: ../mouse.pm_.c:20
+msgid "No Mouse"
+msgstr "没有滑鼠"
+
+#: ../mouse.pm_.c:21
+msgid "Microsoft Rev 2.1A or higher (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:22
+msgid "Logitech CC Series (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:23
+msgid "Logitech MouseMan+/FirstMouse+ (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:24
+msgid "ASCII MieMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:25
+msgid "Genius NetMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:26
+msgid "Microsoft IntelliMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:27
+msgid "MM Series (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:28
+msgid "MM HitTablet (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:29
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr ""
+
+#: ../mouse.pm_.c:30
+msgid "Logitech MouseMan/FirstMouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:31
+msgid "Generic Mouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:32
+msgid "Microsoft compatible (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:33
+msgid "Generic 3 Button Mouse (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:34
+msgid "Mouse Systems (serial)"
+msgstr ""
+
+#: ../mouse.pm_.c:35
+msgid "Generic Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:36
+msgid "Logitech MouseMan/FirstMouse (ps/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:37
+msgid "Generic 3 Button Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:38
+msgid "ALPS GlidePoint (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:39
+msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:40
+msgid "Kensington Thinking Mouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:41
+msgid "ASCII MieMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:42
+msgid "Genius NetMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:43
+msgid "Genius NetMouse Pro (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:44
+msgid "Genius NetScroll (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:45
+msgid "Microsoft IntelliMouse (PS/2)"
+msgstr ""
+
+#: ../mouse.pm_.c:46
+msgid "ATI Bus Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:47
+msgid "Microsoft Bus Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:48
+msgid "Logitech Bus Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:49
+msgid "USB Mouse"
+msgstr ""
+
+#: ../mouse.pm_.c:50
+msgid "USB Mouse (3 buttons or more)"
+msgstr ""
+
+#: ../partition_table.pm_.c:486
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+
+#: ../partition_table.pm_.c:572
+#, c-format
+msgid "Error reading file %s"
+msgstr "请取 %s 档案错误 "
+
+#: ../partition_table.pm_.c:579
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "从档案 %s 回复失败"
+
+#: ../partition_table.pm_.c:581
+msgid "Bad backup file"
+msgstr "错误的备份档案"
+
+#: ../partition_table.pm_.c:602
+#, c-format
+msgid "Error writing to file %s"
+msgstr "写入档案失败"
+
+#: ../placeholder.pm_.c:5
+#, fuzzy
+msgid "Show less"
+msgstr "显示全部"
+
+#: ../placeholder.pm_.c:6
+msgid "Show more"
+msgstr ""
+
+#: ../printer.pm_.c:244
+msgid "Local printer"
+msgstr "本机印表机"
+
+#: ../printer.pm_.c:245
+msgid "Remote lpd"
+msgstr "远端印表机"
+
+#: ../printer.pm_.c:246
+msgid "SMB/Windows 95/98/NT"
+msgstr ""
+
+#: ../printer.pm_.c:247
+msgid "NetWare"
+msgstr ""
+
+#: ../printerdrake.pm_.c:75
+msgid "Local Printer Options"
+msgstr "本机印表机选项"
+
+#: ../printerdrake.pm_.c:76
+msgid ""
+"Every print queue (which print jobs are directed to) needs a\n"
+"name (often lp) and a spool directory associated with it. What\n"
+"name and directory should be used for this queue?"
+msgstr ""
+
+#: ../printerdrake.pm_.c:79
+msgid "Name of queue:"
+msgstr ""
+
+#: ../printerdrake.pm_.c:79
+msgid "Spool directory:"
+msgstr ""
+
+#: ../printerdrake.pm_.c:90
+msgid "Select Printer Connection"
+msgstr ""
+
+#: ../printerdrake.pm_.c:91
+msgid "How is the printer connected?"
+msgstr ""
+
+#: ../printerdrake.pm_.c:99
+msgid "Detecting devices..."
+msgstr ""
+
+#: ../printerdrake.pm_.c:99
+msgid "Test ports"
+msgstr ""
+
+#: ../printerdrake.pm_.c:112
+#, c-format
+msgid "A printer, model \"%s\", has been detected on "
+msgstr ""
+
+#: ../printerdrake.pm_.c:119
+#, fuzzy
+msgid "Local Printer Device"
+msgstr "缺少输入装置"
+
+#: ../printerdrake.pm_.c:120
+msgid ""
+"What device is your printer connected to \n"
+"(note that /dev/lp0 is equivalent to LPT1:)?\n"
+msgstr ""
+
+#: ../printerdrake.pm_.c:121
+#, fuzzy
+msgid "Printer Device:"
+msgstr "装置:"
+
+#: ../printerdrake.pm_.c:125
+msgid "Remote lpd Printer Options"
+msgstr "远端印表机选项"
+
+#: ../printerdrake.pm_.c:126
+msgid ""
+"To use a remote lpd print queue, you need to supply\n"
+"the hostname of the printer server and the queue name\n"
+"on that server which jobs should be placed in."
+msgstr ""
+
+#: ../printerdrake.pm_.c:129
+#, fuzzy
+msgid "Remote hostname:"
+msgstr "要求的主机名称:"
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote queue"
+msgstr ""
+
+#: ../printerdrake.pm_.c:134
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr ""
+
+#: ../printerdrake.pm_.c:135
+msgid ""
+"To print to a SMB printer, you need to provide the\n"
+"SMB host name (Note! It may be different from its\n"
+"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
+"well as the share name for the printer you wish to access and any\n"
+"applicable user name, password, and workgroup information."
+msgstr ""
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server IP:"
+msgstr "SMB 伺服器 IP"
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server host:"
+msgstr "SMB 伺服器 名称"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "Password:"
+msgstr "密码"
+
+#: ../printerdrake.pm_.c:141
+#, fuzzy
+msgid "Share name:"
+msgstr "目录名称:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+#, fuzzy
+msgid "User name:"
+msgstr "目录名称:"
+
+#: ../printerdrake.pm_.c:142
+msgid "Workgroup:"
+msgstr "群组"
+
+#: ../printerdrake.pm_.c:157
+msgid "NetWare Printer Options"
+msgstr ""
+
+#: ../printerdrake.pm_.c:158
+msgid ""
+"To print to a NetWare printer, you need to provide the\n"
+"NetWare print server name (Note! it may be different from its\n"
+"TCP/IP hostname!) as well as the print queue name for the printer you\n"
+"wish to access and any applicable user name and password."
+msgstr ""
+
+#: ../printerdrake.pm_.c:162
+msgid "Print Queue Name:"
+msgstr ""
+
+#: ../printerdrake.pm_.c:162
+#, fuzzy
+msgid "Printer Server:"
+msgstr "点阵大小:"
+
+#: ../printerdrake.pm_.c:173
+msgid "Yes, print ASCII test page"
+msgstr "是,列印 ASCII 测式页"
+
+#: ../printerdrake.pm_.c:174
+msgid "Yes, print PostScript test page"
+msgstr "是,列印 PostScript 测式页"
+
+#: ../printerdrake.pm_.c:175
+msgid "Yes, print both test pages"
+msgstr "是,列印两种测式页"
+
+#: ../printerdrake.pm_.c:183
+msgid "Configure Printer"
+msgstr "设定印表机"
+
+#: ../printerdrake.pm_.c:184
+msgid "What type of printer do you have?"
+msgstr "请问您印表机的型号 ?"
+
+#: ../printerdrake.pm_.c:204
+msgid "Printer options"
+msgstr "印表机选项"
+
+#: ../printerdrake.pm_.c:205
+#, fuzzy
+msgid "Paper Size"
+msgstr "象素大小:"
+
+#: ../printerdrake.pm_.c:206
+msgid "Eject page after job?"
+msgstr ""
+
+#: ../printerdrake.pm_.c:209
+msgid "Fix stair-stepping text?"
+msgstr ""
+
+#: ../printerdrake.pm_.c:212
+msgid "Uniprint driver options"
+msgstr ""
+
+#: ../printerdrake.pm_.c:213
+msgid "Color depth options"
+msgstr ""
+
+#: ../printerdrake.pm_.c:223
+msgid "Do you want to test printing?"
+msgstr ""
+
+#: ../printerdrake.pm_.c:234
+msgid "Printing test page(s)..."
+msgstr ""
+
+#: ../printerdrake.pm_.c:252
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+"Does it work properly?"
+msgstr "请问印表机列印正常吗 ?"
+
+#: ../printerdrake.pm_.c:256
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Does it work properly?"
+msgstr ""
+"测式页已经送出,可能需要一点时间列印\n"
+"请问印表机列印正常吗 ?"
+
+#: ../raid.pm_.c:36
+#, c-format
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "无法加入一个分割区到已经格式话的磁碟阵列 md%d"
+
+#: ../raid.pm_.c:106
+msgid "Can't write file $file"
+msgstr "无法写入 $file 档案"
+
+#: ../raid.pm_.c:146
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "没有足够的分割区给 %d 级的磁碟阵列\n"
+
+#: ../standalone/draksec_.c:28
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive: it must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+
+#: ../standalone/draksec_.c:31
+msgid ""
+"Password are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr "密码已经启动,但是仍不建议做为网路电脑"
+
+#: ../standalone/draksec_.c:32
+msgid ""
+"Few improvements for this security level, the main one is that there are\n"
+"more security warnings and checks."
+msgstr ""
+
+#: ../standalone/draksec_.c:34
+msgid ""
+"This is the standard security recommended for a computer that will be used\n"
+"to connect to the Internet as a client. There are now security checks. "
+msgstr ""
+
+#: ../standalone/draksec_.c:36
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which accept\n"
+"connections from many clients. "
+msgstr ""
+
+#: ../standalone/draksec_.c:39
+msgid ""
+"We take level 4 features, but now the system is entirely closed.\n"
+"Security features are at their maximum."
+msgstr ""
+
+#: ../standalone/draksec_.c:49
+msgid "Setting security level"
+msgstr "设定安全层级"
+
+#: ../standalone/drakxconf_.c:21
+msgid "Choose the tool you want to use"
+msgstr "选择您想要的工具"
+
+#: ../standalone/drakxservices_.c:21
+msgid "Choose which services should be automatically started at boot time"
+msgstr "选择那些服务要在开机时自动启动"
+
+#: ../standalone/mousedrake_.c:30
+msgid "no serial_usb found\n"
+msgstr "找不到 serial_usb\n"
+
+#: ../standalone/mousedrake_.c:35
+msgid "Emulate third button?"
+msgstr "模拟三键"
+
+#: ../standalone/rpmdrake_.c:25
+#, fuzzy
+msgid "reading configuration"
+msgstr "测试设定值"
+
+#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
+#: ../standalone/rpmdrake_.c:253
+msgid "File"
+msgstr "档案"
+
+#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
+#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
+msgid "Search"
+msgstr "搜寻"
+
+#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
+msgid "Package"
+msgstr "套件"
+
+#: ../standalone/rpmdrake_.c:51
+#, fuzzy
+msgid "Text"
+msgstr "系统专家"
+
+#: ../standalone/rpmdrake_.c:53
+#, fuzzy
+msgid "Tree"
+msgstr "绿:"
+
+#: ../standalone/rpmdrake_.c:54
+msgid "Sort by"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:55
+msgid "Category"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:58
+#, fuzzy
+msgid "See"
+msgstr "伺服器"
+
+#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Installed packages"
+msgstr "安装套件"
+
+#: ../standalone/rpmdrake_.c:60
+#, fuzzy
+msgid "Available packages"
+msgstr "/全部套件"
+
+#: ../standalone/rpmdrake_.c:62
+#, fuzzy
+msgid "Show only leaves"
+msgstr "显示全部"
+
+#: ../standalone/rpmdrake_.c:67
+msgid "Expand all"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:68
+#, fuzzy
+msgid "Collapse all"
+msgstr "全部清除"
+
+#: ../standalone/rpmdrake_.c:70
+#, fuzzy
+msgid "Configuration"
+msgstr "测试设定值"
+
+#: ../standalone/rpmdrake_.c:71
+#, fuzzy
+msgid "Add location of packages"
+msgstr "可替换套件"
+
+#: ../standalone/rpmdrake_.c:75
+#, fuzzy
+msgid "Update location"
+msgstr "升级选项"
+
+#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
+#, fuzzy
+msgid "Remove"
+msgstr "移除选项"
+
+#: ../standalone/rpmdrake_.c:100
+msgid "Configuration: Add Location"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:101
+#, fuzzy
+msgid "Expand Tree"
+msgstr ""
+"展开\n"
+"树"
+
+#: ../standalone/rpmdrake_.c:102
+#, fuzzy
+msgid "Collapse Tree"
+msgstr ""
+"收缩\n"
+"树"
+
+#: ../standalone/rpmdrake_.c:103
+#, fuzzy
+msgid "Find Package"
+msgstr "找到套件"
+
+#: ../standalone/rpmdrake_.c:104
+#, fuzzy
+msgid "Find Package containing file"
+msgstr "找到套件,其"
+
+#: ../standalone/rpmdrake_.c:105
+msgid "Toggle between Installed and Available"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:139
+#, fuzzy
+msgid "Files:\n"
+msgstr "档案"
+
+#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
+msgid "Uninstall"
+msgstr "反安装"
+
+#: ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Choose package to install"
+msgstr "选取要安装的程式套件"
+
+#: ../standalone/rpmdrake_.c:190
+#, fuzzy
+msgid "Checking dependencies"
+msgstr "检查签名"
+
+#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
+msgid "Wait"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:209
+#, fuzzy
+msgid "The following packages are going to be uninstalled"
+msgstr "%d 套件无法移除"
+
+#: ../standalone/rpmdrake_.c:210
+#, fuzzy
+msgid "Uninstalling the RPMs"
+msgstr "安装程式"
+
+#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
+msgid "Regexp"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:229
+msgid "Which package are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+#, fuzzy, c-format
+msgid "%s not found"
+msgstr " %d 有问题!"
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No more match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:246
+msgid ""
+"rpmdrake is currently in ``low memory'' mode.\n"
+"I'm going to relaunch rpmdrake to allow searching files"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:253
+msgid "Which file are you looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:269
+msgid "What are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:289
+msgid "Give a name (eg: `extra', `commercial')"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:291
+#, fuzzy
+msgid "Directory"
+msgstr "RPM 目录"
+
+#: ../standalone/rpmdrake_.c:294
+msgid "No cdrom available (nothing in /mnt/cdrom)"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:298
+msgid "URL of the directory containing the RPMs"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:299
+msgid ""
+"For FTP and HTTP, you need to give the location for hdlist\n"
+"It must be relative to the URL above"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:302
+msgid "Please submit the following information"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:304
+#, fuzzy, c-format
+msgid "%s is already in use"
+msgstr "这个名称已经有使用了"
+
+#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
+#: ../standalone/rpmdrake_.c:329
+msgid "Updating the RPMs base"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:328
+#, fuzzy, c-format
+msgid "Going to remove entry %s"
+msgstr "移除选项"
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves takes some time"
+msgstr ""
+
+#, fuzzy
+#~ msgid "Polish"
+#~ msgstr "点阵"
+
+#~ msgid "Going to install %d MB. You can choose to install more programs"
+#~ msgstr "将要安装 %d MB。你可以选择安装更多程式"