1 files changed, 329 insertions, 329 deletions

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index 96230e1b9..ea61bf6df 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
-"POT-Creation-Date: 2018-12-26 18:36+0200\n"
+"POT-Creation-Date: 2020-06-17 13:47+0100\n"
 "PO-Revision-Date: 2018-11-03 12:38+0000\n"
 "Last-Translator: Yuri Chornoivan <yurchor@ukr.net>\n"
 "Language-Team: Chinese (China) (http://www.transifex.com/MageiaLinux/mageia/"
@@ -21,21 +21,21 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: any.pm:263 any.pm:696 any.pm:1113 diskdrake/interactive.pm:650
-#: diskdrake/interactive.pm:874 diskdrake/interactive.pm:936
-#: diskdrake/interactive.pm:1028 diskdrake/interactive.pm:1055
-#: diskdrake/interactive.pm:1286 diskdrake/interactive.pm:1344 do_pkgs.pm:342
-#: do_pkgs.pm:388 interactive.pm:712 pkgs.pm:293
+#: any.pm:272 any.pm:705 any.pm:1129 diskdrake/interactive.pm:650
+#: diskdrake/interactive.pm:901 diskdrake/interactive.pm:966
+#: diskdrake/interactive.pm:1058 diskdrake/interactive.pm:1085
+#: diskdrake/interactive.pm:1316 diskdrake/interactive.pm:1374 do_pkgs.pm:342
+#: do_pkgs.pm:388 interactive.pm:712 pkgs.pm:294
 #, c-format
 msgid "Please wait"
 msgstr "请稍候"
 
-#: any.pm:263
+#: any.pm:272
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "启动引导程序安装中"
 
-#: any.pm:274
+#: any.pm:283
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -51,12 +51,12 @@ msgstr ""
 "\n"
 "要指定新卷 ID 吗?"
 
-#: any.pm:285
+#: any.pm:294
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "安装系统引导程序失败。出现下列错误:"
 
-#: any.pm:325
+#: any.pm:334
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -71,233 +71,233 @@ msgstr ""
 "\n"
 "您要用哪个硬盘启动?"
 
-#: any.pm:336
+#: any.pm:345
 #, c-format
 msgid "Bootloader Installation"
 msgstr "引导程序安装"
 
-#: any.pm:340
+#: any.pm:349
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "您希望启动引导程序安装到哪里?"
 
-#: any.pm:356
+#: any.pm:365
 #, c-format
 msgid "First sector (MBR) of drive %s"
 msgstr "驱动器 %s 的第一扇区(MBR)"
 
-#: any.pm:358
+#: any.pm:367
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "驱动器的第一扇区(MBR)"
 
-#: any.pm:360
+#: any.pm:369
 #, c-format
 msgid "First sector of the root partition"
 msgstr "根分区的第一扇区"
 
-#: any.pm:362
+#: any.pm:371
 #, c-format
 msgid "On Floppy"
 msgstr "在软盘上"
 
-#: any.pm:364 pkgs.pm:289 ugtk2.pm:526 ugtk3.pm:600
+#: any.pm:373 pkgs.pm:290 ugtk2.pm:526 ugtk3.pm:600
 #, c-format
 msgid "Skip"
 msgstr "跳过"
 
-#: any.pm:392
+#: any.pm:401
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "启动风格配置"
 
-#: any.pm:396
+#: any.pm:405
 #, c-format
 msgid "EFI System Partition"
 msgstr "EFI 系统分区"
 
-#: any.pm:411
+#: any.pm:420
 #, c-format
 msgid "Bootloader main options"
 msgstr "引导程序的主要选项"
 
-#: any.pm:415
+#: any.pm:424
 #, c-format
 msgid "Bootloader"
 msgstr "引导程序"
 
-#: any.pm:416
+#: any.pm:425
 #, c-format
 msgid "Bootloader to use"
 msgstr "要使用的引导程序"
 
-#: any.pm:418
+#: any.pm:427
 #, c-format
 msgid "Boot device"
 msgstr "启动设备"
 
-#: any.pm:420
+#: any.pm:429
 #, c-format
 msgid "Main options"
 msgstr "主选项"
 
-#: any.pm:421
+#: any.pm:430
 #, c-format
 msgid "Delay before booting default image"
 msgstr "启动默认映像前的延迟"
 
-#: any.pm:422
+#: any.pm:431
 #, c-format
 msgid "Enable ACPI"
 msgstr "启用 ACPI"
 
-#: any.pm:423
+#: any.pm:432
 #, c-format
 msgid "Enable SMP"
 msgstr "启用 SMP"
 
-#: any.pm:424
+#: any.pm:433
 #, c-format
 msgid "Enable APIC"
 msgstr "启用 APIC"
 
-#: any.pm:426
+#: any.pm:435
 #, c-format
 msgid "Enable Local APIC"
 msgstr "启用本地 APIC"
 
-#: any.pm:427 security/level.pm:63
+#: any.pm:436 security/level.pm:63
 #, c-format
 msgid "Security"
 msgstr "安全"
 
-#: any.pm:428 any.pm:1034 any.pm:1053 authentication.pm:249
+#: any.pm:437 any.pm:1050 any.pm:1069 authentication.pm:249
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "密码"
 
-#: any.pm:431 authentication.pm:260
+#: any.pm:440 authentication.pm:260
 #, c-format
 msgid "The passwords do not match"
 msgstr "两次密码不符"
 
-#: any.pm:431 authentication.pm:260 diskdrake/interactive.pm:1513
+#: any.pm:440 authentication.pm:260 diskdrake/interactive.pm:1543
 #, c-format
 msgid "Please try again"
 msgstr "请再试一次"
 
-#: any.pm:433
+#: any.pm:442
 #, c-format
 msgid "You cannot use a password with %s"
 msgstr "您在 %s 时不能使用密码"
 
-#: any.pm:437 any.pm:1037 any.pm:1055 authentication.pm:250
+#: any.pm:446 any.pm:1053 any.pm:1071 authentication.pm:250
 #, c-format
 msgid "Password (again)"
 msgstr "密码(请再输一次)"
 
-#: any.pm:505 any.pm:672 any.pm:715
+#: any.pm:514 any.pm:681 any.pm:724
 #, c-format
 msgid "Bootloader Configuration"
 msgstr "引导程序配置"
 
-#: any.pm:509
+#: any.pm:518
 #, c-format
 msgid "Install or update rEFInd in the EFI system partition"
 msgstr ""
 
-#: any.pm:511
+#: any.pm:520 any.pm:744
 #, c-format
-msgid "Install in /EFI/BOOT (workaround for some BIOSs)"
+msgid "Install in /EFI/BOOT (removable device or workaround for some BIOSs)"
 msgstr ""
 
-#: any.pm:551 any.pm:576 diskdrake/interactive.pm:411
+#: any.pm:560 any.pm:585 diskdrake/interactive.pm:411
 #, c-format
 msgid "Label"
 msgstr "标签"
 
-#: any.pm:552 any.pm:560 any.pm:721
+#: any.pm:561 any.pm:569 any.pm:730
 #, c-format
 msgid "Append"
 msgstr "追加"
 
-#: any.pm:553 any.pm:565 any.pm:722
+#: any.pm:562 any.pm:574 any.pm:731
 #, c-format
 msgid "Video mode"
 msgstr "显示模式"
 
-#: any.pm:558
+#: any.pm:567
 #, c-format
 msgid "Image"
 msgstr "映像"
 
-#: any.pm:559 any.pm:571
+#: any.pm:568 any.pm:580
 #, c-format
 msgid "Root"
 msgstr "根目录"
 
-#: any.pm:562
+#: any.pm:571
 #, c-format
 msgid "Xen append"
 msgstr "追加 Xen"
 
-#: any.pm:564
+#: any.pm:573
 #, c-format
 msgid "Requires password to boot"
 msgstr "需要密码来进行引导"
 
-#: any.pm:566
+#: any.pm:575
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:567
+#: any.pm:576
 #, c-format
 msgid "Network profile"
 msgstr "网络配置文件"
 
-#: any.pm:578 any.pm:719 harddrake/v4l.pm:438
+#: any.pm:587 any.pm:728 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "默认"
 
-#: any.pm:586
+#: any.pm:595
 #, c-format
 msgid "Empty label not allowed"
 msgstr "标签不能为空"
 
-#: any.pm:587
+#: any.pm:596
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您必须指定一个内核映像"
 
-#: any.pm:587
+#: any.pm:596
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您必须指定根目录所在分区"
 
-#: any.pm:588
+#: any.pm:597
 #, c-format
 msgid "This label is already used"
 msgstr "这个名字已经被使用"
 
-#: any.pm:612
+#: any.pm:621
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "要添加的条目是什么类型?"
 
-#: any.pm:613
+#: any.pm:622
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:613
+#: any.pm:622
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其它操作系统(Windows...)"
 
-#: any.pm:673
+#: any.pm:682
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -306,24 +306,24 @@ msgstr ""
 "引导菜单中现有下列条目。\n"
 "您可以创建额外的条目或是更改已存在的条目。"
 
-#: any.pm:724
+#: any.pm:733
 #, c-format
 msgid "Do not touch ESP or MBR"
 msgstr "不要修改 ESP 或 MBR"
 
-#: any.pm:726 diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:460
+#: any.pm:735 diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:460
 #: diskdrake/interactive.pm:305 diskdrake/interactive.pm:391
-#: diskdrake/interactive.pm:605 diskdrake/interactive.pm:820
-#: diskdrake/interactive.pm:885 diskdrake/interactive.pm:1053
-#: diskdrake/interactive.pm:1095 diskdrake/interactive.pm:1096
-#: diskdrake/interactive.pm:1329 diskdrake/interactive.pm:1367
-#: diskdrake/interactive.pm:1512 do_pkgs.pm:45 do_pkgs.pm:74 do_pkgs.pm:100
+#: diskdrake/interactive.pm:605 diskdrake/interactive.pm:847
+#: diskdrake/interactive.pm:912 diskdrake/interactive.pm:1083
+#: diskdrake/interactive.pm:1125 diskdrake/interactive.pm:1126
+#: diskdrake/interactive.pm:1359 diskdrake/interactive.pm:1397
+#: diskdrake/interactive.pm:1542 do_pkgs.pm:45 do_pkgs.pm:74 do_pkgs.pm:100
 #: do_pkgs.pm:137
 #, c-format
 msgid "Warning"
 msgstr "警告"
 
-#: any.pm:727
+#: any.pm:736
 #, c-format
 msgid ""
 "Not installing on ESP or MBR means that the installation is not bootable "
@@ -332,12 +332,12 @@ msgstr ""
 "不配置 ESP 或 MBR 意味着安装后可能无法引导系统，除非您使用其他操作系统来引导 "
 "Mageia！"
 
-#: any.pm:731
+#: any.pm:740
 #, c-format
 msgid "Probe Foreign OS"
 msgstr "检测其他操作系统"
 
-#: any.pm:732
+#: any.pm:741
 #, c-format
 msgid ""
 "If grub2 takes too long to install, you can use this option to skip "
@@ -346,199 +346,199 @@ msgstr ""
 "如果 GRUB2 的安装过程迟迟不能结束，您可以使用此选项来跳过检测其他操作系统、加"
 "快安装速度"
 
-#: any.pm:993
+#: any.pm:1009
 #, c-format
 msgid "access to X programs"
 msgstr "允许使用 X 应用程序"
 
-#: any.pm:994
+#: any.pm:1010
 #, c-format
 msgid "access to rpm tools"
 msgstr "允许使用 rpm 工具"
 
-#: any.pm:995
+#: any.pm:1011
 #, c-format
 msgid "allow \"su\""
 msgstr "允许使用“su”指令"
 
-#: any.pm:996
+#: any.pm:1012
 #, c-format
 msgid "access to administrative files"
 msgstr "允许访问系统设置文件"
 
-#: any.pm:997
+#: any.pm:1013
 #, c-format
 msgid "access to network tools"
 msgstr "允许使用网络工具"
 
-#: any.pm:998
+#: any.pm:1014
 #, c-format
 msgid "access to compilation tools"
 msgstr "允许使用编译工具"
 
-#: any.pm:1004
+#: any.pm:1020
 #, c-format
 msgid "(already added %s)"
 msgstr "(已经添加了 %s)"
 
-#: any.pm:1010
+#: any.pm:1026
 #, c-format
 msgid "Please give a user name"
 msgstr "请给出用户名"
 
-#: any.pm:1011
+#: any.pm:1027
 #, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
 "cased letters, numbers, `-' and `_'"
 msgstr "用户名只能包含小写字母、数字、“-”和“_”"
 
-#: any.pm:1012
+#: any.pm:1028
 #, c-format
 msgid "The user name is too long"
 msgstr "该用户名太长"
 
-#: any.pm:1013
+#: any.pm:1029
 #, c-format
 msgid "This user name has already been added"
 msgstr "该用户名已经存在"
 
-#: any.pm:1019 any.pm:1057
+#: any.pm:1035 any.pm:1073
 #, c-format
 msgid "User ID"
 msgstr "用户 ID"
 
-#: any.pm:1019 any.pm:1058
+#: any.pm:1035 any.pm:1074
 #, c-format
 msgid "Group ID"
 msgstr "组 ID"
 
-#: any.pm:1020
+#: any.pm:1036
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必须是数字"
 
-#: any.pm:1021
+#: any.pm:1037
 #, c-format
 msgid "%s should be above 1000. Accept anyway?"
 msgstr "%s 应该大于 1000。仍然接受吗？"
 
-#: any.pm:1025
+#: any.pm:1041
 #, c-format
 msgid "User management"
 msgstr "用户管理"
 
-#: any.pm:1031
+#: any.pm:1047
 #, c-format
 msgid "Enable guest account"
 msgstr "启用来宾账户"
 
-#: any.pm:1033 authentication.pm:236
+#: any.pm:1049 authentication.pm:236
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "设定管理员(root)密码"
 
-#: any.pm:1039
+#: any.pm:1055
 #, c-format
 msgid "Enter a user"
 msgstr "输入一个用户"
 
-#: any.pm:1041
+#: any.pm:1057
 #, c-format
 msgid "Icon"
 msgstr "图标"
 
-#: any.pm:1044
+#: any.pm:1060
 #, c-format
 msgid "Real name"
 msgstr "真实姓名"
 
-#: any.pm:1051
+#: any.pm:1067
 #, c-format
 msgid "Login name"
 msgstr "登录名"
 
-#: any.pm:1056
+#: any.pm:1072
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:1060
+#: any.pm:1076
 #, c-format
 msgid "Extra Groups:"
 msgstr "额外组："
 
-#: any.pm:1113
+#: any.pm:1129
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "正在添加介质，请稍候..."
 
-#: any.pm:1165 security/l10n.pm:14
+#: any.pm:1181 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自动登录"
 
-#: any.pm:1166
+#: any.pm:1182
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "您可在此设定启动时自动以某用户的身份登入系统。"
 
-#: any.pm:1167
+#: any.pm:1183
 #, c-format
 msgid "Use this feature"
 msgstr "使用此特性"
 
-#: any.pm:1168
+#: any.pm:1184
 #, c-format
 msgid "Choose the default user:"
 msgstr "选择默认的用户:"
 
-#: any.pm:1169
+#: any.pm:1185
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "选择要运行的窗口管理程序:"
 
-#: any.pm:1180 any.pm:1195 any.pm:1264
+#: any.pm:1196 any.pm:1211 any.pm:1280
 #, c-format
 msgid "Release Notes"
 msgstr "版本通告"
 
-#: any.pm:1202 any.pm:1566 interactive/gtk.pm:820
+#: any.pm:1218 any.pm:1582 interactive/gtk.pm:820
 #, c-format
 msgid "Close"
 msgstr "关闭"
 
-#: any.pm:1250
+#: any.pm:1266
 #, c-format
 msgid "License agreement"
 msgstr "许可协议"
 
-#: any.pm:1252 diskdrake/dav.pm:26 mygtk2.pm:1229 mygtk3.pm:1312
+#: any.pm:1268 diskdrake/dav.pm:26 mygtk2.pm:1229 mygtk3.pm:1312
 #, c-format
 msgid "Quit"
 msgstr "退出"
 
-#: any.pm:1259
+#: any.pm:1275
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "您接受此许可协议吗?"
 
-#: any.pm:1260
+#: any.pm:1276
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:1260
+#: any.pm:1276
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: any.pm:1286 any.pm:1349
+#: any.pm:1302 any.pm:1365
 #, c-format
 msgid "Please choose a language to use"
 msgstr "请选择要使用的语言。"
 
-#: any.pm:1314
+#: any.pm:1330
 #, c-format
 msgid ""
 "%s can support multiple languages. Select\n"
@@ -548,87 +548,87 @@ msgstr ""
 "%s 可以支持多种语言。请选择您想要安装的语言。\n"
 "安装完成并重新启动系统后它们就可以使用。"
 
-#: any.pm:1316 fs/partitioning_wizard.pm:194
+#: any.pm:1332 fs/partitioning_wizard.pm:208
 #, c-format
 msgid "Mageia"
 msgstr "Mageia"
 
-#: any.pm:1317
+#: any.pm:1333
 #, c-format
 msgid "Multiple languages"
 msgstr "多语言"
 
-#: any.pm:1318
+#: any.pm:1334
 #, c-format
 msgid "Select Additional Languages"
 msgstr "选择附加语言"
 
-#: any.pm:1327 any.pm:1358
+#: any.pm:1343 any.pm:1374
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "使用旧的编码方式(非 UTF-8)"
 
-#: any.pm:1328
+#: any.pm:1344
 #, c-format
 msgid "All languages"
 msgstr "全部语言"
 
-#: any.pm:1350
+#: any.pm:1366
 #, c-format
 msgid "Language choice"
 msgstr "语言选择"
 
-#: any.pm:1404
+#: any.pm:1420
 #, c-format
 msgid "Country / Region"
 msgstr "国家/地区"
 
-#: any.pm:1405
+#: any.pm:1421
 #, c-format
 msgid "Please choose your country"
 msgstr "请选择您的国家/地区。"
 
-#: any.pm:1407
+#: any.pm:1423
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "在此列出了可用的全部国家/地区"
 
-#: any.pm:1408
+#: any.pm:1424
 #, c-format
 msgid "Other Countries"
 msgstr "其它国家"
 
-#: any.pm:1408 interactive.pm:491 interactive/gtk.pm:444
+#: any.pm:1424 interactive.pm:491 interactive/gtk.pm:444
 #, c-format
 msgid "Advanced"
 msgstr "高级"
 
-#: any.pm:1414
+#: any.pm:1430
 #, c-format
 msgid "Input method:"
 msgstr "输入法:"
 
-#: any.pm:1417
+#: any.pm:1433
 #, c-format
 msgid "None"
 msgstr "无"
 
-#: any.pm:1511
+#: any.pm:1527
 #, c-format
 msgid "No sharing"
 msgstr "禁止共享"
 
-#: any.pm:1511
+#: any.pm:1527
 #, c-format
 msgid "Allow all users"
 msgstr "允许所有用户使用"
 
-#: any.pm:1511
+#: any.pm:1527
 #, c-format
 msgid "Custom"
 msgstr "自定义"
 
-#: any.pm:1515
+#: any.pm:1531
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -641,32 +641,32 @@ msgstr ""
 "选择允许, 用户将只需在 Konqueror 和 Nautilus 中单击“共享”即可开放共享。\n"
 "“自定义”允许按照不同用户细分设置。\n"
 
-#: any.pm:1527
+#: any.pm:1543
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS: 传统的 Unix 文件共享系统, Mac 和 Windows 上支持较少。"
 
-#: any.pm:1530
+#: any.pm:1546
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB: Windows、MacOS X 和其它现代 Linux 系统所用的文件共享系统。"
 
-#: any.pm:1538
+#: any.pm:1554
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您可以使用 NFS 或 Samba 导出。请选择您想要使用的协议。"
 
-#: any.pm:1566
+#: any.pm:1582
 #, c-format
 msgid "Launch userdrake"
 msgstr "运行“Drak 用户管理”"
 
-#: any.pm:1568
+#: any.pm:1584
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -675,54 +675,54 @@ msgstr ""
 "按用户设置的共享, 使用组“fileshare”。\n"
 "您可以使用“Drak 用户管理”将用户添加到此组中。"
 
-#: any.pm:1675
+#: any.pm:1691
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
 "logout now."
 msgstr "您需要注销后重新登录才能让更改生效。单击确定立即注销。"
 
-#: any.pm:1679
+#: any.pm:1695
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您需要注销后重新登录才能让更改生效"
 
-#: any.pm:1714
+#: any.pm:1730
 #, c-format
 msgid "Timezone"
 msgstr "时区"
 
-#: any.pm:1714
+#: any.pm:1730
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: any.pm:1737 any.pm:1739
+#: any.pm:1753 any.pm:1755
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、时钟和时区设置"
 
-#: any.pm:1740
+#: any.pm:1756
 #, c-format
 msgid "What is the best time?"
 msgstr "最适合的时间是几点?"
 
-#: any.pm:1744
+#: any.pm:1760
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬件时钟设定为 GMT)"
 
-#: any.pm:1745
+#: any.pm:1761
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬件时钟设定为本地时间)"
 
-#: any.pm:1747
+#: any.pm:1763
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: any.pm:1748
+#: any.pm:1764
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用 NTP)"
@@ -1103,21 +1103,21 @@ msgstr ""
 msgid "not enough room in /boot"
 msgstr "/boot 中没有足够空间"
 
-#: bootloader.pm:2680
+#: bootloader.pm:2686
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "必须更新您的启动引导程序配置, 因为分区已经重新编号"
 
-#: bootloader.pm:2693
+#: bootloader.pm:2699
 #, c-format
 msgid ""
 "The bootloader cannot be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "无法正确安装启动引导程序。您需要以抢救方式启动并选择“%s”"
 
-#: bootloader.pm:2694
+#: bootloader.pm:2700
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安装启动引导程序"
@@ -1209,7 +1209,7 @@ msgid "Mount point"
 msgstr "挂载点"
 
 #: diskdrake/dav.pm:67 diskdrake/interactive.pm:410
-#: diskdrake/interactive.pm:1182 diskdrake/removable.pm:24
+#: diskdrake/interactive.pm:1212 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1230,12 +1230,12 @@ msgstr "完成"
 #: diskdrake/interactive.pm:246 diskdrake/interactive.pm:259
 #: diskdrake/interactive.pm:460 diskdrake/interactive.pm:535
 #: diskdrake/interactive.pm:553 diskdrake/interactive.pm:558
-#: diskdrake/interactive.pm:717 diskdrake/interactive.pm:1020
-#: diskdrake/interactive.pm:1073 diskdrake/interactive.pm:1229
-#: diskdrake/interactive.pm:1242 diskdrake/interactive.pm:1245
-#: diskdrake/interactive.pm:1513 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49
+#: diskdrake/interactive.pm:717 diskdrake/interactive.pm:1050
+#: diskdrake/interactive.pm:1103 diskdrake/interactive.pm:1259
+#: diskdrake/interactive.pm:1272 diskdrake/interactive.pm:1275
+#: diskdrake/interactive.pm:1543 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49
 #: do_pkgs.pm:54 do_pkgs.pm:79 do_pkgs.pm:103 do_pkgs.pm:108 do_pkgs.pm:142
-#: fsedit.pm:264 interactive/http.pm:117 interactive/http.pm:118
+#: fsedit.pm:268 interactive/http.pm:117 interactive/http.pm:118
 #: modules/interactive.pm:19 scanner.pm:94 scanner.pm:105 scanner.pm:112
 #: scanner.pm:119 wizards.pm:95 wizards.pm:99 wizards.pm:121
 #, c-format
@@ -1263,22 +1263,22 @@ msgid "Server: "
 msgstr "服务器: "
 
 #: diskdrake/dav.pm:125 diskdrake/interactive.pm:505
-#: diskdrake/interactive.pm:1391 diskdrake/interactive.pm:1473
+#: diskdrake/interactive.pm:1421 diskdrake/interactive.pm:1503
 #, c-format
 msgid "Mount point: "
 msgstr "挂载点: "
 
-#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1480
+#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1510
 #, c-format
 msgid "Options: %s"
 msgstr "选项: %s"
 
 #: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:300
 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:113
-#: fs/partitioning_wizard.pm:66 fs/partitioning_wizard.pm:264
-#: fs/partitioning_wizard.pm:272 fs/partitioning_wizard.pm:310
-#: fs/partitioning_wizard.pm:466 fs/partitioning_wizard.pm:529
-#: fs/partitioning_wizard.pm:614 fs/partitioning_wizard.pm:617
+#: fs/partitioning_wizard.pm:80 fs/partitioning_wizard.pm:278
+#: fs/partitioning_wizard.pm:286 fs/partitioning_wizard.pm:324
+#: fs/partitioning_wizard.pm:480 fs/partitioning_wizard.pm:543
+#: fs/partitioning_wizard.pm:628 fs/partitioning_wizard.pm:631
 #, c-format
 msgid "Partitioning"
 msgstr "分区"
@@ -1288,8 +1288,8 @@ msgstr "分区"
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr "点击分区，选择文件系统类型，然后选择操作"
 
-#: diskdrake/hd_gtk.pm:133 diskdrake/interactive.pm:1203
-#: diskdrake/interactive.pm:1213 diskdrake/interactive.pm:1267
+#: diskdrake/hd_gtk.pm:133 diskdrake/interactive.pm:1233
+#: diskdrake/interactive.pm:1243 diskdrake/interactive.pm:1297
 #, c-format
 msgid "Read carefully"
 msgstr "请仔细阅读！"
@@ -1309,7 +1309,7 @@ msgstr "退出"
 msgid "Continue"
 msgstr "继续"
 
-#: diskdrake/hd_gtk.pm:216 fs/partitioning_wizard.pm:590 interactive.pm:778
+#: diskdrake/hd_gtk.pm:216 fs/partitioning_wizard.pm:604 interactive.pm:778
 #: interactive/gtk.pm:812 interactive/gtk.pm:830 interactive/gtk.pm:862
 #: ugtk2.pm:934 ugtk3.pm:1030
 #, c-format
@@ -1352,28 +1352,28 @@ msgstr "未知"
 msgid "Ext4"
 msgstr "Ext4"
 
-#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436
+#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436
+#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450
 #, c-format
 msgid "Swap"
 msgstr "交换"
 
-#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436
+#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:432 fs/partitioning_wizard.pm:437 services.pm:201
+#: diskdrake/hd_gtk.pm:432 fs/partitioning_wizard.pm:451 services.pm:201
 #, c-format
 msgid "Other"
 msgstr "其它"
 
-#: diskdrake/hd_gtk.pm:432 diskdrake/interactive.pm:1397
-#: fs/partitioning_wizard.pm:437
+#: diskdrake/hd_gtk.pm:432 diskdrake/interactive.pm:1427
+#: fs/partitioning_wizard.pm:451
 #, c-format
 msgid "Empty"
 msgstr "空"
@@ -1422,7 +1422,7 @@ msgid "More"
 msgstr "更多"
 
 #: diskdrake/interactive.pm:280 diskdrake/interactive.pm:293
-#: diskdrake/interactive.pm:1313 mygtk2.pm:1228 mygtk3.pm:1311
+#: diskdrake/interactive.pm:1343 mygtk2.pm:1228 mygtk3.pm:1311
 #, c-format
 msgid "Confirmation"
 msgstr "确认"
@@ -1447,7 +1447,7 @@ msgstr "退出而不保存分区表吗?"
 msgid "Do you want to save the /etc/fstab modifications?"
 msgstr "您想要保存 /etc/fstab 修改吗?"
 
-#: diskdrake/interactive.pm:300 fs/partitioning_wizard.pm:310
+#: diskdrake/interactive.pm:300 fs/partitioning_wizard.pm:324
 #, c-format
 msgid "You need to reboot for the partition table modifications to take effect"
 msgstr "对分区表的更改要等到重新启动后才能生效"
@@ -1520,7 +1520,7 @@ msgstr "详细信息"
 msgid "View"
 msgstr "查看"
 
-#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:833
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:860
 #, c-format
 msgid "Resize"
 msgstr "改变大小"
@@ -1530,12 +1530,12 @@ msgstr "改变大小"
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:983
+#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:1013
 #, c-format
 msgid "Add to RAID"
 msgstr "加入 RAID"
 
-#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:1002
+#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:1032
 #, c-format
 msgid "Add to LVM"
 msgstr "加入 LVM"
@@ -1595,12 +1595,12 @@ msgstr "创建一个新分区"
 msgid "Start sector: "
 msgstr "开始扇区: "
 
-#: diskdrake/interactive.pm:501 diskdrake/interactive.pm:1088
+#: diskdrake/interactive.pm:501 diskdrake/interactive.pm:1118
 #, c-format
 msgid "Size in MB: "
 msgstr "大小(MB): "
 
-#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:1089
+#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:1119
 #, c-format
 msgid "Filesystem type: "
 msgstr "文件系统类型: "
@@ -1625,12 +1625,12 @@ msgstr "加密分区"
 msgid "Encryption key "
 msgstr "加密密钥"
 
-#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:1517
+#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:1547
 #, c-format
 msgid "Encryption key (again)"
 msgstr "加密密钥(再输入一次)"
 
-#: diskdrake/interactive.pm:532 diskdrake/interactive.pm:1513
+#: diskdrake/interactive.pm:532 diskdrake/interactive.pm:1543
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "两次加密密钥不符"
@@ -1726,53 +1726,53 @@ msgstr ""
 msgid "Where do you want to mount %s?"
 msgstr "您想把 %s 挂载到哪里?"
 
-#: diskdrake/interactive.pm:778 diskdrake/interactive.pm:874
-#: fs/partitioning_wizard.pm:151 fs/partitioning_wizard.pm:233
+#: diskdrake/interactive.pm:798 diskdrake/interactive.pm:901
+#: fs/partitioning_wizard.pm:165 fs/partitioning_wizard.pm:247
 #, c-format
 msgid "Resizing"
 msgstr "改变大小"
 
-#: diskdrake/interactive.pm:778
+#: diskdrake/interactive.pm:798
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "计算 FAT 文件系统的边界"
 
-#: diskdrake/interactive.pm:820
+#: diskdrake/interactive.pm:847
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "无法更改此分区的大小"
 
-#: diskdrake/interactive.pm:825
+#: diskdrake/interactive.pm:852
 #, c-format
 msgid "All data on this partition should be backed up"
 msgstr "应该先备份在这个分区上的所有数据"
 
-#: diskdrake/interactive.pm:827
+#: diskdrake/interactive.pm:854
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除"
 
-#: diskdrake/interactive.pm:834
+#: diskdrake/interactive.pm:861
 #, c-format
 msgid "Choose the new size"
 msgstr "选择新的大小"
 
-#: diskdrake/interactive.pm:835
+#: diskdrake/interactive.pm:862
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小(MB): "
 
-#: diskdrake/interactive.pm:836
+#: diskdrake/interactive.pm:863
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小大小：%s MB"
 
-#: diskdrake/interactive.pm:837
+#: diskdrake/interactive.pm:864
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大大小：%s MB"
 
-#: diskdrake/interactive.pm:885 fs/partitioning_wizard.pm:241
+#: diskdrake/interactive.pm:912 fs/partitioning_wizard.pm:255
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s),\n"
@@ -1781,62 +1781,62 @@ msgstr ""
 "为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Microsoft Windows® 时"
 "可能会自动运行文件系统检查"
 
-#: diskdrake/interactive.pm:951 diskdrake/interactive.pm:1508
+#: diskdrake/interactive.pm:981 diskdrake/interactive.pm:1538
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "文件系统加密密钥"
 
-#: diskdrake/interactive.pm:952
+#: diskdrake/interactive.pm:982
 #, c-format
 msgid "Enter your filesystem encryption key"
 msgstr "输入您的文件系统加密密钥"
 
-#: diskdrake/interactive.pm:953 diskdrake/interactive.pm:1516
+#: diskdrake/interactive.pm:983 diskdrake/interactive.pm:1546
 #, c-format
 msgid "Encryption key"
 msgstr "加密密钥"
 
-#: diskdrake/interactive.pm:960
+#: diskdrake/interactive.pm:990
 #, c-format
 msgid "Invalid key"
 msgstr "无效的密钥"
 
-#: diskdrake/interactive.pm:983
+#: diskdrake/interactive.pm:1013
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "选择加入一个已存在的 RAID"
 
-#: diskdrake/interactive.pm:985 diskdrake/interactive.pm:1004
+#: diskdrake/interactive.pm:1015 diskdrake/interactive.pm:1034
 #, c-format
 msgid "new"
 msgstr "新建"
 
-#: diskdrake/interactive.pm:1002
+#: diskdrake/interactive.pm:1032
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "选择加入一个已存在的 LVM"
 
-#: diskdrake/interactive.pm:1014 diskdrake/interactive.pm:1023
+#: diskdrake/interactive.pm:1044 diskdrake/interactive.pm:1053
 #, c-format
 msgid "LVM name"
 msgstr "LVM 名称"
 
-#: diskdrake/interactive.pm:1015
+#: diskdrake/interactive.pm:1045
 #, c-format
 msgid "Enter a name for the new LVM volume group"
 msgstr "输入新 LVM 卷组的名称"
 
-#: diskdrake/interactive.pm:1020
+#: diskdrake/interactive.pm:1050
 #, c-format
 msgid "\"%s\" already exists"
 msgstr "“%s”已经存在"
 
-#: diskdrake/interactive.pm:1028
+#: diskdrake/interactive.pm:1058
 #, c-format
 msgid "Setting up LVM"
 msgstr "设置 LVM"
 
-#: diskdrake/interactive.pm:1053
+#: diskdrake/interactive.pm:1083
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1845,117 +1845,117 @@ msgstr ""
 "物理卷 %s 仍在使用中。\n"
 "您是否想要将此卷上已用的物理扩展分区移动到其它卷上？"
 
-#: diskdrake/interactive.pm:1055
+#: diskdrake/interactive.pm:1085
 #, c-format
 msgid "Moving physical extents"
 msgstr "移动物理扩展分区"
 
-#: diskdrake/interactive.pm:1073
+#: diskdrake/interactive.pm:1103
 #, c-format
 msgid "This partition cannot be used for loopback"
 msgstr "这个分区不能被用于回环"
 
-#: diskdrake/interactive.pm:1086
+#: diskdrake/interactive.pm:1116
 #, c-format
 msgid "Loopback"
 msgstr "回环"
 
-#: diskdrake/interactive.pm:1087
+#: diskdrake/interactive.pm:1117
 #, c-format
 msgid "Loopback file name: "
 msgstr "回环文件名: "
 
-#: diskdrake/interactive.pm:1092
+#: diskdrake/interactive.pm:1122
 #, c-format
 msgid "Give a file name"
 msgstr "给一个文件名"
 
-#: diskdrake/interactive.pm:1095
+#: diskdrake/interactive.pm:1125
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "文件已经被另一个回环使用, 请另外选择一个"
 
-#: diskdrake/interactive.pm:1096
+#: diskdrake/interactive.pm:1126
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "文件已经存在。使用现有的文件吗?"
 
-#: diskdrake/interactive.pm:1128 diskdrake/interactive.pm:1131
+#: diskdrake/interactive.pm:1158 diskdrake/interactive.pm:1161
 #, c-format
 msgid "Mount options"
 msgstr "挂载选项"
 
-#: diskdrake/interactive.pm:1138
+#: diskdrake/interactive.pm:1168
 #, c-format
 msgid "Various"
 msgstr "杂项"
 
-#: diskdrake/interactive.pm:1184
+#: diskdrake/interactive.pm:1214
 #, c-format
 msgid "device"
 msgstr "设备"
 
-#: diskdrake/interactive.pm:1185
+#: diskdrake/interactive.pm:1215
 #, c-format
 msgid "level"
 msgstr "级别"
 
-#: diskdrake/interactive.pm:1186
+#: diskdrake/interactive.pm:1216
 #, c-format
 msgid "chunk size in KiB"
 msgstr "组块大小(KB)"
 
-#: diskdrake/interactive.pm:1204
+#: diskdrake/interactive.pm:1234
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "小心: 该操作有危险。"
 
-#: diskdrake/interactive.pm:1220
+#: diskdrake/interactive.pm:1250
 #, c-format
 msgid "Partitioning Type"
 msgstr "分区类型"
 
-#: diskdrake/interactive.pm:1220
+#: diskdrake/interactive.pm:1250
 #, c-format
 msgid "What type of partitioning?"
 msgstr "何种分区类型?"
 
-#: diskdrake/interactive.pm:1258
+#: diskdrake/interactive.pm:1288
 #, c-format
 msgid "You'll need to reboot before the modification can take effect"
 msgstr "修改要等到重新启动后才能生效"
 
-#: diskdrake/interactive.pm:1267
+#: diskdrake/interactive.pm:1297
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk"
 msgstr "驱动器 %s 的分区表将会写入磁盘中！"
 
-#: diskdrake/interactive.pm:1286 fs/format.pm:106 fs/format.pm:113
+#: diskdrake/interactive.pm:1316 fs/format.pm:172 fs/format.pm:179
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分区 %s"
 
-#: diskdrake/interactive.pm:1299
+#: diskdrake/interactive.pm:1329
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "格式化分区 %s 之后, 该分区上的所有数据都将丢失"
 
-#: diskdrake/interactive.pm:1313 fs/partitioning.pm:48
+#: diskdrake/interactive.pm:1343 fs/partitioning.pm:50
 #, c-format
 msgid "Check for bad blocks?"
 msgstr "是否检查坏磁块?"
 
-#: diskdrake/interactive.pm:1328
+#: diskdrake/interactive.pm:1358
 #, c-format
 msgid "Move files to the new partition"
 msgstr "移动文件到新分区"
 
-#: diskdrake/interactive.pm:1328
+#: diskdrake/interactive.pm:1358
 #, c-format
 msgid "Hide files"
 msgstr "隐藏文件"
 
-#: diskdrake/interactive.pm:1329
+#: diskdrake/interactive.pm:1359
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1971,127 +1971,127 @@ msgstr ""
 "您可以选择将文件移动到即将挂载到该目录的分区，或者将其保留在原地(这将导致这些"
 "文件因为其它分区被挂载被隐藏)"
 
-#: diskdrake/interactive.pm:1344
+#: diskdrake/interactive.pm:1374
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "移动文件到新分区"
 
-#: diskdrake/interactive.pm:1348
+#: diskdrake/interactive.pm:1378
 #, c-format
 msgid "Copying %s"
 msgstr "复制 %s"
 
-#: diskdrake/interactive.pm:1352
+#: diskdrake/interactive.pm:1382
 #, c-format
 msgid "Removing %s"
 msgstr "删除 %s"
 
-#: diskdrake/interactive.pm:1366
+#: diskdrake/interactive.pm:1396
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分区 %s 现在被识别为 %s"
 
-#: diskdrake/interactive.pm:1367
+#: diskdrake/interactive.pm:1397
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分区已被重新编号: "
 
-#: diskdrake/interactive.pm:1392 diskdrake/interactive.pm:1457
+#: diskdrake/interactive.pm:1422 diskdrake/interactive.pm:1487
 #, c-format
 msgid "Device: "
 msgstr "设备: "
 
-#: diskdrake/interactive.pm:1393
+#: diskdrake/interactive.pm:1423
 #, c-format
 msgid "Volume label: "
 msgstr "卷标: "
 
-#: diskdrake/interactive.pm:1394
+#: diskdrake/interactive.pm:1424
 #, c-format
 msgid "UUID: "
 msgstr "UUDI: "
 
-#: diskdrake/interactive.pm:1395
+#: diskdrake/interactive.pm:1425
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 下的盘符: %s(只是猜测)\n"
 
-#: diskdrake/interactive.pm:1399 diskdrake/interactive.pm:1476
+#: diskdrake/interactive.pm:1429 diskdrake/interactive.pm:1506
 #, c-format
 msgid "Type: "
 msgstr "类型: "
 
-#: diskdrake/interactive.pm:1401
+#: diskdrake/interactive.pm:1431
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "开始: 第 %s 扇区\n"
 
-#: diskdrake/interactive.pm:1403
+#: diskdrake/interactive.pm:1433
 #, c-format
 msgid "Size: %s (%s%% of disk)"
 msgstr "大小：%s（磁盘的 %s%%）"
 
-#: diskdrake/interactive.pm:1405
+#: diskdrake/interactive.pm:1435
 #, c-format
 msgid "Size: %s"
 msgstr "大小: %s"
 
-#: diskdrake/interactive.pm:1407
+#: diskdrake/interactive.pm:1437
 #, c-format
 msgid ", %s sectors"
 msgstr ", %s 扇区"
 
-#: diskdrake/interactive.pm:1409
+#: diskdrake/interactive.pm:1439
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "柱面 %d 到 %d\n"
 
-#: diskdrake/interactive.pm:1410
+#: diskdrake/interactive.pm:1440
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "逻辑分区数：%d\n"
 
-#: diskdrake/interactive.pm:1411
+#: diskdrake/interactive.pm:1441
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1412
+#: diskdrake/interactive.pm:1442
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1413
+#: diskdrake/interactive.pm:1443
 #, c-format
 msgid "Mounted\n"
 msgstr "已挂载\n"
 
-#: diskdrake/interactive.pm:1414
+#: diskdrake/interactive.pm:1444
 #, c-format
 msgid "RAID %s\n"
 msgstr "RAID %s\n"
 
-#: diskdrake/interactive.pm:1416
+#: diskdrake/interactive.pm:1446
 #, c-format
 msgid "Encrypted"
 msgstr "已加密"
 
-#: diskdrake/interactive.pm:1418
+#: diskdrake/interactive.pm:1448
 #, c-format
 msgid " (mapped on %s)"
 msgstr " (已映射为 %s)"
 
-#: diskdrake/interactive.pm:1419
+#: diskdrake/interactive.pm:1449
 #, c-format
 msgid " (to map on %s)"
 msgstr "  (应映射为 %s)"
 
-#: diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:1450
 #, c-format
 msgid " (inactive)"
 msgstr " (交互)"
 
-#: diskdrake/interactive.pm:1427
+#: diskdrake/interactive.pm:1457
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2100,7 +2100,7 @@ msgstr ""
 "回环文件: \n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1428
+#: diskdrake/interactive.pm:1458
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2109,27 +2109,27 @@ msgstr ""
 "预设的启动分区\n"
 "    (给 MS-DOS 启动用的, 跟 lilo 无关)\n"
 
-#: diskdrake/interactive.pm:1430
+#: diskdrake/interactive.pm:1460
 #, c-format
 msgid "Level %s\n"
 msgstr "级别 %s\n"
 
-#: diskdrake/interactive.pm:1431
+#: diskdrake/interactive.pm:1461
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "组块大小 %d KB\n"
 
-#: diskdrake/interactive.pm:1432
+#: diskdrake/interactive.pm:1462
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "RAID 磁盘 %s\n"
 
-#: diskdrake/interactive.pm:1434
+#: diskdrake/interactive.pm:1464
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "回环文件名称: %s"
 
-#: diskdrake/interactive.pm:1437
+#: diskdrake/interactive.pm:1467
 #, c-format
 msgid ""
 "\n"
@@ -2141,7 +2141,7 @@ msgstr ""
 "此分区很可能是驱动器分区。\n"
 "您最好请不要更改它。\n"
 
-#: diskdrake/interactive.pm:1440
+#: diskdrake/interactive.pm:1470
 #, c-format
 msgid ""
 "\n"
@@ -2153,62 +2153,62 @@ msgstr ""
 "该 Bootstrap 分区特别\n"
 "是保留给双重启动系统。\n"
 
-#: diskdrake/interactive.pm:1449
+#: diskdrake/interactive.pm:1479
 #, c-format
 msgid "Free space on %s (%s)"
 msgstr "%s (%s) 上的空闲空间"
 
-#: diskdrake/interactive.pm:1458
+#: diskdrake/interactive.pm:1488
 #, c-format
 msgid "Read-only"
 msgstr "只读"
 
-#: diskdrake/interactive.pm:1459
+#: diskdrake/interactive.pm:1489
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小: %s\n"
 
-#: diskdrake/interactive.pm:1460
+#: diskdrake/interactive.pm:1490
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
 
-#: diskdrake/interactive.pm:1461
+#: diskdrake/interactive.pm:1491
 #, c-format
 msgid "Name: "
 msgstr "名称: "
 
-#: diskdrake/interactive.pm:1462
+#: diskdrake/interactive.pm:1492
 #, c-format
 msgid "Medium type: "
 msgstr "介质类型: "
 
-#: diskdrake/interactive.pm:1463
+#: diskdrake/interactive.pm:1493
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM 磁盘 %s\n"
 
-#: diskdrake/interactive.pm:1464
+#: diskdrake/interactive.pm:1494
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "分区表类型: %s\n"
 
-#: diskdrake/interactive.pm:1465
+#: diskdrake/interactive.pm:1495
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1509
+#: diskdrake/interactive.pm:1539
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "选择该文件系统的加密密钥"
 
-#: diskdrake/interactive.pm:1512
+#: diskdrake/interactive.pm:1542
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
 
-#: diskdrake/interactive.pm:1519
+#: diskdrake/interactive.pm:1549
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密算法"
@@ -2299,7 +2299,7 @@ msgstr "下列软件包需要安装: \n"
 msgid "Installing packages..."
 msgstr "正在安装软件包..."
 
-#: do_pkgs.pm:388 pkgs.pm:293
+#: do_pkgs.pm:388 pkgs.pm:294
 #, c-format
 msgid "Removing packages..."
 msgstr "正在删除软件包..."
@@ -2312,12 +2312,12 @@ msgid ""
 msgstr ""
 "发生错误！新建文件系统时找不到可用的设备。请检查您的硬件以确定问题的原因"
 
-#: fs/any.pm:77 fs/partitioning_wizard.pm:77
+#: fs/any.pm:77 fs/partitioning_wizard.pm:91
 #, c-format
 msgid "You must have a ESP FAT32 partition mounted in /boot/EFI"
 msgstr "您必须有一个ESP FAT32分区载入 /boot/EFI"
 
-#: fs/any.pm:83 fs/partitioning_wizard.pm:82
+#: fs/any.pm:83 fs/partitioning_wizard.pm:96
 #, c-format
 msgid ""
 "You must have a BIOS boot partition for non-UEFI GPT-partitioned disks. "
@@ -2326,27 +2326,27 @@ msgstr ""
 "若要在非 UEFI 硬件上使用 GPT 分区磁盘，您必须设置一个 BIOS 引导分区。请在继续"
 "下一步操作前先创建它。"
 
-#: fs/format.pm:110
+#: fs/format.pm:176
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "正在创建和格式化文件 %s"
 
-#: fs/format.pm:130
+#: fs/format.pm:202
 #, c-format
 msgid "I do not know how to set label on %s with type %s"
 msgstr "不知道如何设定 %2$s 类型的 %1$s 卷标"
 
-#: fs/format.pm:142
+#: fs/format.pm:214
 #, c-format
 msgid "setting label on %s failed, is it formatted?"
 msgstr "设定 %s 的卷标失败，该卷是否已格式化？"
 
-#: fs/format.pm:190
+#: fs/format.pm:280
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道如何将 %s 格式化成 %s 类型"
 
-#: fs/format.pm:195 fs/format.pm:197
+#: fs/format.pm:285 fs/format.pm:287
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "%s 格式化 %s 失败"
@@ -2371,7 +2371,7 @@ msgstr "将分区 %s 挂载于目录 %s 失败"
 msgid "Checking %s"
 msgstr "正在检查 %s"
 
-#: fs/mount.pm:126 partition_table.pm:488
+#: fs/mount.pm:126 partition_table.pm:500
 #, c-format
 msgid "error unmounting %s: %s"
 msgstr "卸载 %s 出错: %s"
@@ -2509,24 +2509,24 @@ msgstr "正在扫描各个分区以查找挂载点"
 msgid "Choose the mount points"
 msgstr "选择挂载点"
 
-#: fs/partitioning.pm:46
+#: fs/partitioning.pm:48
 #, c-format
 msgid "Choose the partitions you want to format"
 msgstr "选择您要格式化的分区"
 
-#: fs/partitioning.pm:75
+#: fs/partitioning.pm:77
 #, c-format
 msgid ""
 "Failed to check filesystem %s. Do you want to repair the errors? (beware, "
 "you can lose data)"
 msgstr "检查文件系统 %s 失败。您想修复错误吗?(注意, 有可能丢失数据)"
 
-#: fs/partitioning.pm:78
+#: fs/partitioning.pm:80
 #, c-format
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
 
-#: fs/partitioning_wizard.pm:66
+#: fs/partitioning_wizard.pm:80
 #, c-format
 msgid ""
 "You must have a root partition.\n"
@@ -2537,7 +2537,7 @@ msgstr ""
 "请先创建一个 Linux 分区(或在图中单击现有的一个)。\n"
 "然后在列表里选择“挂载点”, 设为“/”。"
 
-#: fs/partitioning_wizard.pm:72
+#: fs/partitioning_wizard.pm:86
 #, c-format
 msgid ""
 "You do not have a swap partition.\n"
@@ -2548,42 +2548,42 @@ msgstr ""
 "\n"
 "要继续吗?"
 
-#: fs/partitioning_wizard.pm:115
+#: fs/partitioning_wizard.pm:129
 #, c-format
 msgid "Use free space"
 msgstr "使用空闲空间"
 
-#: fs/partitioning_wizard.pm:117
+#: fs/partitioning_wizard.pm:131
 #, c-format
 msgid "Not enough free space to allocate new partitions"
 msgstr "没有足够空闲空间分配给新分区"
 
-#: fs/partitioning_wizard.pm:125
+#: fs/partitioning_wizard.pm:139
 #, c-format
 msgid "Use existing partitions"
 msgstr "使用现存的分区"
 
-#: fs/partitioning_wizard.pm:127
+#: fs/partitioning_wizard.pm:141
 #, c-format
 msgid "There is no existing partition to use"
 msgstr "没有可使用的现存分区"
 
-#: fs/partitioning_wizard.pm:151
+#: fs/partitioning_wizard.pm:165
 #, c-format
 msgid "Computing the size of the Microsoft Windows® partition"
 msgstr "正在计算 Microsoft Windows® 分区的大小"
 
-#: fs/partitioning_wizard.pm:187
+#: fs/partitioning_wizard.pm:201
 #, c-format
 msgid "Use the free space on a Microsoft Windows® partition"
 msgstr "使用在 Microsoft Windows® 分区上的空闲空间"
 
-#: fs/partitioning_wizard.pm:191
+#: fs/partitioning_wizard.pm:205
 #, c-format
 msgid "Which partition do you want to resize?"
 msgstr "您需要改变哪个分区的大小?"
 
-#: fs/partitioning_wizard.pm:194
+#: fs/partitioning_wizard.pm:208
 #, c-format
 msgid ""
 "Your Microsoft Windows® partition is too fragmented. Please reboot your "
@@ -2593,12 +2593,12 @@ msgstr ""
 "您的 Microsoft Windows® 分区有太多碎片, 请重新启动, 进入 Microsoft Windows®, "
 "运行磁盘碎片整理程序, 然后重新开始安装 %s"
 
-#: fs/partitioning_wizard.pm:201
+#: fs/partitioning_wizard.pm:215
 #, c-format
 msgid "Failed to find the partition to resize (%d choices)"
 msgstr "查找要改变大小的分区失败（%d 个选项）"
 
-#: fs/partitioning_wizard.pm:208
+#: fs/partitioning_wizard.pm:222
 #, c-format
 msgid ""
 "WARNING!\n"
@@ -2632,75 +2632,75 @@ msgstr ""
 "一切就绪后, 请按“%s”。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:217 fs/partitioning_wizard.pm:594
+#: fs/partitioning_wizard.pm:231 fs/partitioning_wizard.pm:608
 #: interactive.pm:674 interactive/curses.pm:270 ugtk2.pm:519 ugtk3.pm:593
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
-#: fs/partitioning_wizard.pm:223
+#: fs/partitioning_wizard.pm:237
 #, c-format
 msgid "Partitionning"
 msgstr "分区"
 
-#: fs/partitioning_wizard.pm:223
+#: fs/partitioning_wizard.pm:237
 #, c-format
 msgid "Which size do you want to keep for Microsoft Windows® on partition %s?"
 msgstr "您将保留多少空间给 Microsoft Windows® 分区 %s?"
 
-#: fs/partitioning_wizard.pm:224
+#: fs/partitioning_wizard.pm:238
 #, c-format
 msgid "Size"
 msgstr "大小"
 
-#: fs/partitioning_wizard.pm:233
+#: fs/partitioning_wizard.pm:247
 #, c-format
 msgid "Resizing Microsoft Windows® partition"
 msgstr "改变 Microsoft Windows® 分区大小"
 
-#: fs/partitioning_wizard.pm:238
+#: fs/partitioning_wizard.pm:252
 #, c-format
 msgid "FAT resizing failed: %s"
 msgstr "FAT 调整大小失败: %s"
 
-#: fs/partitioning_wizard.pm:254
+#: fs/partitioning_wizard.pm:268
 #, c-format
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr "没有 FAT 分区用来调整大小(或者没有足够剩余空间)"
 
-#: fs/partitioning_wizard.pm:259
+#: fs/partitioning_wizard.pm:273
 #, c-format
 msgid "Remove Microsoft Windows®"
 msgstr "删除 Microsoft Windows®"
 
-#: fs/partitioning_wizard.pm:259
+#: fs/partitioning_wizard.pm:273
 #, c-format
 msgid "Erase and use entire disk"
 msgstr "清除并使用整个磁盘"
 
-#: fs/partitioning_wizard.pm:263
+#: fs/partitioning_wizard.pm:277
 #, c-format
 msgid ""
 "You have more than one hard disk drive, which one do you want the installer "
 "to use?"
 msgstr "您有不只一个硬盘, 您要在哪个上面安装系统?"
 
-#: fs/partitioning_wizard.pm:271 fsedit.pm:641
+#: fs/partitioning_wizard.pm:285 fsedit.pm:655
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr "磁盘 %s 上现存的所有分区及其资料将被清除"
 
-#: fs/partitioning_wizard.pm:284
+#: fs/partitioning_wizard.pm:298
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自定义磁盘分区"
 
-#: fs/partitioning_wizard.pm:290
+#: fs/partitioning_wizard.pm:304
 #, c-format
 msgid "Use fdisk"
 msgstr "使用 fdisk"
 
-#: fs/partitioning_wizard.pm:293
+#: fs/partitioning_wizard.pm:307
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -2709,42 +2709,42 @@ msgstr ""
 "您现在可以在 %s 上分区。\n"
 "做完之后, 不要忘记用“w”命令保存您的修改"
 
-#: fs/partitioning_wizard.pm:436
+#: fs/partitioning_wizard.pm:450
 #, c-format
 msgid "Ext2/3/4"
 msgstr "Ext2/3/4"
 
-#: fs/partitioning_wizard.pm:466 fs/partitioning_wizard.pm:614
+#: fs/partitioning_wizard.pm:480 fs/partitioning_wizard.pm:628
 #, c-format
 msgid "I cannot find any room for installing"
 msgstr "我无法找到安装需要的空间"
 
-#: fs/partitioning_wizard.pm:475 fs/partitioning_wizard.pm:621
+#: fs/partitioning_wizard.pm:489 fs/partitioning_wizard.pm:635
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分区向导找到下列解决办法:"
 
-#: fs/partitioning_wizard.pm:545
+#: fs/partitioning_wizard.pm:559
 #, c-format
 msgid "Here is the content of your disk drive "
 msgstr "这是您硬盘驱动器的内容 "
 
-#: fs/partitioning_wizard.pm:632
+#: fs/partitioning_wizard.pm:646
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "分区失败: %s"
 
-#: fs/type.pm:383
+#: fs/type.pm:430
 #, c-format
 msgid "You cannot use JFS for partitions smaller than 16MB"
 msgstr "您不能把 JFS(日志文件系统)用于小于 16 MB 的分区"
 
-#: fs/type.pm:384
+#: fs/type.pm:431
 #, c-format
 msgid "You cannot use ReiserFS for partitions smaller than 32MB"
 msgstr "您不能把 ReiserFS 用于小于 32 MB 的分区"
 
-#: fs/type.pm:385
+#: fs/type.pm:432
 #, c-format
 msgid "You cannot use btrfs for partitions smaller than 256MB"
 msgstr "您无法使用小于 256MB 的 btrfs 分区"
@@ -2764,12 +2764,12 @@ msgstr "有 /usr"
 msgid "server"
 msgstr "服务器"
 
-#: fsedit.pm:155
+#: fsedit.pm:159
 #, c-format
 msgid "BIOS software RAID detected on disks %s. Activate it?"
 msgstr "磁盘 %s 检测到了 BIOS 软件 RAID。激活吗?"
 
-#: fsedit.pm:265
+#: fsedit.pm:269
 #, c-format
 msgid ""
 "I cannot read the partition table of device %s, it's too corrupted for me :"
@@ -2787,22 +2787,22 @@ msgstr ""
 "\n"
 "您同意清除所有分区吗?\n"
 
-#: fsedit.pm:448
+#: fsedit.pm:453
 #, c-format
 msgid "Mount points must begin with a leading /"
 msgstr "挂载点必需要以 / 为开头"
 
-#: fsedit.pm:449
+#: fsedit.pm:454
 #, c-format
 msgid "Mount points should contain only alphanumerical characters"
 msgstr "挂载点只能包含字母和数字"
 
-#: fsedit.pm:450
+#: fsedit.pm:455
 #, c-format
 msgid "There is already a partition with mount point %s\n"
 msgstr "已经有一个分区的挂载点是 %s\n"
 
-#: fsedit.pm:453
+#: fsedit.pm:458
 #, c-format
 msgid ""
 "You've selected an encrypted partition as root (/).\n"
@@ -2813,29 +2813,29 @@ msgstr ""
 "若没有 /boot 分区，则引导器无法引导系统。\n"
 "请您确保添加了独立的 /boot 分区。"
 
-#: fsedit.pm:459 fsedit.pm:470
+#: fsedit.pm:464 fsedit.pm:475
 #, c-format
 msgid "You cannot use an encrypted filesystem for mount point %s"
 msgstr "挂载点 %s 不能使用用加密的文件系统"
 
-#: fsedit.pm:462 fsedit.pm:464
+#: fsedit.pm:467 fsedit.pm:469
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "这个目录应该保留在根文件系统中"
 
-#: fsedit.pm:466 fsedit.pm:468
+#: fsedit.pm:471 fsedit.pm:473
 #, c-format
 msgid ""
 "You need a true filesystem (ext2/3/4, reiserfs, xfs, or jfs) for this mount "
 "point\n"
 msgstr "这个挂载点需要一个真正的文件系统(ext2/ext3、reiserfs、xfs 或 jfs)\n"
 
-#: fsedit.pm:538
+#: fsedit.pm:548
 #, c-format
 msgid "Not enough free space for auto-allocating"
 msgstr "没有足够的空闲空间供自动分配"
 
-#: fsedit.pm:540
+#: fsedit.pm:550
 #, c-format
 msgid "Nothing to do"
 msgstr "不做任何事"
@@ -4629,7 +4629,7 @@ msgstr "赞比亚"
 msgid "Zimbabwe"
 msgstr "津巴布韦"
 
-#: lang.pm:1537
+#: lang.pm:1539
 #, c-format
 msgid "Welcome to %s"
 msgstr "欢迎使用 %s"
@@ -5050,12 +5050,12 @@ msgstr "密码可抵御常见攻击"
 msgid "Password seems secure"
 msgstr "密码好像安全"
 
-#: partition_table.pm:494
+#: partition_table.pm:506
 #, c-format
 msgid "mount failed: "
 msgstr "挂载失败: "
 
-#: partition_table.pm:664
+#: partition_table.pm:677
 #, c-format
 msgid ""
 "You have a hole in your partition table but I cannot use it.\n"
@@ -5065,7 +5065,7 @@ msgstr ""
 "分区表里有一段是空的, 可是我没法使用它。\n"
 "唯一的办法是移动您的主分区, 把空闲部分换到与扩展分区相邻的位置。"
 
-#: partition_table/raw.pm:293
+#: partition_table/raw.pm:294
 #, c-format
 msgid ""
 "Something bad is happening on your hard disk drive. \n"
@@ -5077,39 +5077,39 @@ msgstr ""
 "一次数据完整性检查失败了。\n"
 "这意味着, 如果继续往硬盘里写入任何东西, 硬盘将可能随时坏掉, 损坏数据"
 
-#: pkgs.pm:260 pkgs.pm:263 pkgs.pm:276
+#: pkgs.pm:261 pkgs.pm:264 pkgs.pm:277
 #, c-format
 msgid "Unused packages removal"
 msgstr "删除不需要的软件包"
 
-#: pkgs.pm:260
+#: pkgs.pm:261
 #, c-format
 msgid "Finding unused hardware packages..."
 msgstr "正在查找不需要的硬件软件包..."
 
-#: pkgs.pm:263
+#: pkgs.pm:264
 #, c-format
 msgid "Finding unused localization packages..."
 msgstr "正在查找不需要的本地化软件包..."
 
-#: pkgs.pm:277
+#: pkgs.pm:278
 #, c-format
 msgid ""
 "We have detected that some packages are not needed for your system "
 "configuration."
 msgstr "我们检测到您的系统配置无需下列软件包。"
 
-#: pkgs.pm:278
+#: pkgs.pm:279
 #, c-format
 msgid "We will remove the following packages, unless you choose otherwise:"
 msgstr "我们将会删除这些软件包，而您可以在进行之前对其微调:"
 
-#: pkgs.pm:281 pkgs.pm:282
+#: pkgs.pm:282 pkgs.pm:283
 #, c-format
 msgid "Unused hardware support"
 msgstr "未使用的硬件支持"
 
-#: pkgs.pm:285 pkgs.pm:286
+#: pkgs.pm:286 pkgs.pm:287
 #, c-format
 msgid "Unused localization"
 msgstr "未使用的本地化"