summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/uk.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/uk.po')
-rw-r--r--perl-install/share/po/uk.po4041
1 files changed, 4041 insertions, 0 deletions
diff --git a/perl-install/share/po/uk.po b/perl-install/share/po/uk.po
new file mode 100644
index 000000000..267bf8cf0
--- /dev/null
+++ b/perl-install/share/po/uk.po
@@ -0,0 +1,4041 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 1999 Free Software Foundation, Inc.
+# Copyright (c) 1999 MandrakeSoft
+# "Dmytro Koval'ov" <kov@tokyo.email.ne.jp>, 1999, 2000
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: DrakX VERSION\n"
+"POT-Creation-Date: 2000-01-09 21:03+0100\n"
+"PO-Revision-Date: 2000-01-05 12:06+09:00\n"
+"Last-Translator: Dmytro Koval'ov <kov@tokyo.email.ne.jp>\n"
+"Language-Team: Ukrainian\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=koi8-u\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Graphic card"
+msgstr "����� �����"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Select a graphic card"
+msgstr "����Ҧ�� ���Ʀ��� �����"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "Choose a X server"
+msgstr "����Ҧ�� X ������"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "X server"
+msgstr "X ������"
+
+#: ../Xconfigurator.pm_.c:181
+msgid "Select the memory size of your graphic card"
+msgstr "����Ҧ�� ���ͦ� ���'�Ԧ ���ϧ ���Ʀ��ϧ �����"
+
+#: ../Xconfigurator.pm_.c:203
+msgid "Choose options for server"
+msgstr "����Ҧ�� ��������� ��� �������"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Choose a monitor"
+msgstr "����Ҧ�� ��� ��Φ����"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Monitor"
+msgstr "�����"
+
+#: ../Xconfigurator.pm_.c:224
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"��� ���� �������� ��������� - �� ������� ����������ϧ ���������\n"
+"(����� - �������, � ���� ������������ ���������� �� ����Φ), ��\n"
+"���¦��� ������� - ������� ������������ϧ ������Φ��æ� (����� - ��\n"
+"�������, � ���� �� ����Φ ��������� �����������Φ �����).\n"
+"\n"
+"���� ������� ���'�����, �� �� �����Φ ������� ����� ��Φ���, ���������\n"
+"����� �� ����������� ������Φ� �������Ҧ� ������ ��Φ����: ������ ��\n"
+"������ ��������� ���������� ����� ��Ϥ�� ��Φ����. \n"
+"���� �� ����� ���Φ�� ���� ������������� ����� ��Φ���� ����Ҧ�� �����\n"
+"Ǧ���� ��Φ���."
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Horizontal refresh rate"
+msgstr "������� ������������ϧ ���������"
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Vertical refresh rate"
+msgstr "������� ����������ϧ ���������"
+
+#: ../Xconfigurator.pm_.c:272
+msgid "Monitor not configured"
+msgstr "��Φ��� �� ����Ʀ���������"
+
+#: ../Xconfigurator.pm_.c:275
+msgid "Graphic card not configured yet"
+msgstr "����� ����� �� �� ����Ʀ��������"
+
+#: ../Xconfigurator.pm_.c:278
+msgid "Resolutions not chosen yet"
+msgstr "�� �� �� ������� ���Ħ���� ����Φ���"
+
+#: ../Xconfigurator.pm_.c:289
+msgid "Do you want to test the configuration?"
+msgstr "�� �� ������ ����������� ���� ���Ʀ����æ�?"
+
+#: ../Xconfigurator.pm_.c:293
+msgid "Warning: testing is dangerous on this graphic card"
+msgstr "�����! ���������� æ�� ���Ʀ��ϧ ����� ����������."
+
+#: ../Xconfigurator.pm_.c:296
+msgid "Test configuration"
+msgstr "���������� ���Ʀ����æ�"
+
+#: ../Xconfigurator.pm_.c:334
+msgid "An error occurred:"
+msgstr "������� �������:"
+
+#: ../Xconfigurator.pm_.c:336
+msgid ""
+"\n"
+"try changing some parameters"
+msgstr ""
+"\n"
+"���������� �ͦ���� ���˦ ��������������"
+
+#: ../Xconfigurator.pm_.c:358
+#, c-format
+msgid "(leaving in %d seconds)"
+msgstr "(������� ����� %d ������)"
+
+#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
+msgid "Is this correct?"
+msgstr "��� צ���?"
+
+#: ../Xconfigurator.pm_.c:370
+msgid "An error occurred, try changing some parameters"
+msgstr "������� �������, ���������� �ͦ���� ���˦ ��������������"
+
+#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
+msgid "Automatic resolutions"
+msgstr "����������� ���Ħ���� ����Φ���"
+
+#: ../Xconfigurator.pm_.c:379
+msgid ""
+"To find the available resolutions I will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+"��� ��������� ���Ħ��Φ �������Ԧ, � ������� ���������� ˦���� � ���\n"
+"��� ����� ������ ˦���� ��ڦ�...\n"
+"�� ������ �������� ��Φ���, ���� ������. �� ���դ�� �������� ������,\n"
+"���� ���������� ��˦�������"
+
+#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
+msgid "Resolution"
+msgstr "���Ħ���� ����Φ���"
+
+#: ../Xconfigurator.pm_.c:469
+msgid "Choose resolution and color depth"
+msgstr "����Ҧ�� ���Ħ���� ����Φ��� �� ˦��˦��� �����Ҧ�"
+
+#: ../Xconfigurator.pm_.c:477
+msgid "Show all"
+msgstr "�������� ���"
+
+#: ../Xconfigurator.pm_.c:501
+msgid "Resolutions"
+msgstr "���Ħ��Φ �������Ԧ"
+
+#: ../Xconfigurator.pm_.c:548
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Sometimes, though, it may hang the machine.\n"
+"Do you want to try?"
+msgstr ""
+"� ���� ���������� ������ Ԧ ���Ħ��Φ �������Ԧ, � ����� � ����\n"
+"��������� (��, ���������, 800x600). \n"
+"���, � ������ �������� ����'���� ���� ��������� ��� �����. �� ��\n"
+"������ ���������� ��� ����? "
+
+#: ../Xconfigurator.pm_.c:553
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+"�� ���� ������ ���Ҧ����� �������� ������\n"
+"���������� ������� ���� צ��� ����� �� ��Φ���"
+
+#: ../Xconfigurator.pm_.c:772
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "��������� ���צ�����: %s\n"
+
+#: ../Xconfigurator.pm_.c:773
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr "��� ��ۦ: %s\n"
+
+#: ../Xconfigurator.pm_.c:774
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "���æ������ �����Ҧ� ��ۦ: %s\n"
+
+#: ../Xconfigurator.pm_.c:775
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "�����: %s\n"
+
+#: ../Xconfigurator.pm_.c:776
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "������������� ������Φ��æ� ��Φ����: %s\n"
+
+#: ../Xconfigurator.pm_.c:777
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "������� ����������ϧ ��������� ��Φ����: %s\n"
+
+#: ../Xconfigurator.pm_.c:778
+#, c-format
+msgid "Graphic card: %s\n"
+msgstr "����� �����: %s\n"
+
+#: ../Xconfigurator.pm_.c:779
+#, c-format
+msgid "Graphic memory: %s kB\n"
+msgstr "����� ���'Ѧ��: %s��\n"
+
+#: ../Xconfigurator.pm_.c:780
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "X ������: %s\n"
+
+#: ../Xconfigurator.pm_.c:794
+msgid "Preparing X-Window configuration"
+msgstr "��������� ���Ʀ����æ� X-Window"
+
+#: ../Xconfigurator.pm_.c:808
+msgid "Change Monitor"
+msgstr "�ͦΦ�� ��Φ���"
+
+#: ../Xconfigurator.pm_.c:809
+msgid "Change Graphic card"
+msgstr "�ͦΦ�� צ��� �����"
+
+#: ../Xconfigurator.pm_.c:810
+msgid "Change Server options"
+msgstr "�ͦΦ�� ��������� �������"
+
+#: ../Xconfigurator.pm_.c:811
+msgid "Change Resolution"
+msgstr "�ͦΦ�� ���Ħ���� ����Φ���"
+
+#: ../Xconfigurator.pm_.c:812
+msgid "Automatical resolutions search"
+msgstr "������������ ����� ���Ħ����� �Ħ�������"
+
+#: ../Xconfigurator.pm_.c:816
+msgid "Show information"
+msgstr "����� �������æ�"
+
+#: ../Xconfigurator.pm_.c:817
+msgid "Test again"
+msgstr "�� ���� ����"
+
+#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
+msgid "Quit"
+msgstr "��Ȧ�"
+
+#: ../Xconfigurator.pm_.c:822
+msgid "What do you want to do?"
+msgstr "�� �� ������ ����ϧ�� ���� �������"
+
+#: ../Xconfigurator.pm_.c:829
+msgid "Forget the changes?"
+msgstr "����������� צ� �ͦ�?"
+
+#: ../Xconfigurator.pm_.c:845
+#, c-format
+msgid "Please relog into %s to activate the changes"
+msgstr "���Ť���������, ����-�����, �� ��� � %s ��� �������� � Ħ� �ͦ��"
+
+#: ../Xconfigurator.pm_.c:861
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"����-�����, ���Ħ�� �� ������� � ��Ԧ� ������������� Ctrl-Alt-BackSpace"
+
+#: ../Xconfigurator.pm_.c:864
+msgid "X at startup"
+msgstr "���������� X �����������"
+
+#: ../Xconfigurator.pm_.c:865
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+"� ���� �����ϧ�� ���� ������� ���, �� X ���� ���������� �����������\n"
+"��� ������������ �������.\n"
+"�� �� ������, ��� X ��������� �����������?"
+
+#: ../Xconfigurator_consts.pm_.c:4
+msgid "256 colors (8 bits)"
+msgstr "265 �����Ҧ� (8 ¦�)"
+
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors (15 bits)"
+msgstr "32 ����ަ �����Ҧ� (15 ¦�)"
+
+#: ../Xconfigurator_consts.pm_.c:6
+msgid "65 thousand colors (16 bits)"
+msgstr "65 ����� �����Ҧ� (16 ¦�)"
+
+#: ../Xconfigurator_consts.pm_.c:7
+msgid "16 million colors (24 bits)"
+msgstr "16 ͦ����Φ� �����Ҧ� (24 ¦�)"
+
+#: ../Xconfigurator_consts.pm_.c:8
+msgid "4 billion colors (32 bits)"
+msgstr "4 ͦ������� �����Ҧ� (32 ¦�)"
+
+#: ../Xconfigurator_consts.pm_.c:96
+msgid "256 kB"
+msgstr "256 ��"
+
+#: ../Xconfigurator_consts.pm_.c:97
+msgid "512 kB"
+msgstr "512 ��"
+
+#: ../Xconfigurator_consts.pm_.c:98
+msgid "1 MB"
+msgstr "1 ��"
+
+#: ../Xconfigurator_consts.pm_.c:99
+msgid "2 MB"
+msgstr "2 ��"
+
+#: ../Xconfigurator_consts.pm_.c:100
+msgid "4 MB"
+msgstr "4 ��"
+
+#: ../Xconfigurator_consts.pm_.c:101
+msgid "8 MB"
+msgstr "8 ��"
+
+#: ../Xconfigurator_consts.pm_.c:102
+msgid "16 MB or more"
+msgstr "16 ��"
+
+#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
+msgid "Standard VGA, 640x480 at 60 Hz"
+msgstr "����������� VGA, 640x480 at 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:109
+msgid "Super VGA, 800x600 at 56 Hz"
+msgstr " ����� VGA, 640x480 at 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:110
+msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
+msgstr ""
+"��ͦ���� � 8514, 1024x768 at 87 Hz ������������ ��������� (��� 800x600)"
+
+#: ../Xconfigurator_consts.pm_.c:111
+msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+msgstr "����� VGA, 1024x768 at 87 Hz ������������ ���������, 800x600 at 56 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:112
+msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+msgstr "���������� ����� VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:113
+msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+msgstr "SVGA ��� �����������ϧ ��������� , 1024x768 at 60 Hz, 800x600 at 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:114
+msgid "High Frequency SVGA, 1024x768 at 70 Hz"
+msgstr "��������������� SVGA, 1024x768 at 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:115
+msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
+msgstr ""
+"�� �ͦ���� ��������, ���� ���� ��������� � �������� �� 1280x1024 at 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:116
+msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
+msgstr ""
+"�� �ͦ���� ��������, ���� ���� ��������� � �������� �� 1280x1024 at 74 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:117
+msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
+msgstr ""
+"�� �ͦ���� ��������, ���� ���� ��������� � �������� �� 1280x1024 at 76 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:118
+msgid "Monitor that can do 1600x1200 at 70 Hz"
+msgstr "�����, �� ���� ��������� � �������� �� 1600x1200 at 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:119
+msgid "Monitor that can do 1600x1200 at 76 Hz"
+msgstr "�����, �� ���� ��������� � �������� �� 1600x1200 at 76 Hz"
+
+#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
+msgid "Create"
+msgstr "��������"
+
+#: ../diskdrake.pm_.c:17
+msgid "Unmount"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
+msgid "Delete"
+msgstr "������"
+
+#: ../diskdrake.pm_.c:18
+msgid "Format"
+msgstr "�����������"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
+msgid "Resize"
+msgstr "�ͦ���� ���ͦ�"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
+msgid "Type"
+msgstr "���"
+
+#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
+msgid "Mount point"
+msgstr "����� ����������"
+
+#: ../diskdrake.pm_.c:33
+msgid "Write /etc/fstab"
+msgstr "�������� /etc/fstab"
+
+#: ../diskdrake.pm_.c:34
+msgid "Toggle to expert mode"
+msgstr "��������� > �������"
+
+#: ../diskdrake.pm_.c:35
+msgid "Toggle to normal mode"
+msgstr "������� > ���������"
+
+#: ../diskdrake.pm_.c:36
+msgid "Restore from file"
+msgstr "��������� � �����"
+
+#: ../diskdrake.pm_.c:37
+msgid "Save in file"
+msgstr "�������� � ����"
+
+#: ../diskdrake.pm_.c:38
+msgid "Restore from floppy"
+msgstr "��������� � �������"
+
+#: ../diskdrake.pm_.c:39
+msgid "Save on floppy"
+msgstr "�������� �� �������"
+
+#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
+#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
+msgid "Done"
+msgstr "��˦�����"
+
+#: ../diskdrake.pm_.c:43
+msgid "Clear all"
+msgstr "�������� ���"
+
+#: ../diskdrake.pm_.c:44
+msgid "Format all"
+msgstr "����������� ���"
+
+#: ../diskdrake.pm_.c:45
+msgid "Auto allocate"
+msgstr "����������� �����Ħ����"
+
+#: ../diskdrake.pm_.c:48
+msgid "All primary partitions are used"
+msgstr "�Ӧ �����Φ Ц����Ħ�� �����Ԧ"
+
+#: ../diskdrake.pm_.c:48
+msgid "I can't add any more partition"
+msgstr "�� ���� ������ ������� Ц����Ħ��"
+
+#: ../diskdrake.pm_.c:48
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"��� ���� ¦���� Ц����Ħ̦�, ڦ�Ҧ�� ���� �� ���, �� �. ���� �����\n"
+"�� ������ �������� ��ͦ��� ����� ˦���� ���������� Ц����Ħ̦�"
+
+#: ../diskdrake.pm_.c:51
+msgid "Rescue partition table"
+msgstr "���Ҧ��� ������� Ц����Ħ̦�"
+
+#: ../diskdrake.pm_.c:52
+msgid "Undo"
+msgstr "�����"
+
+#: ../diskdrake.pm_.c:53
+msgid "Write partition table"
+msgstr "�������� ������� Ц����Ħ̦�"
+
+#: ../diskdrake.pm_.c:54
+msgid "Reload"
+msgstr "���������������"
+
+#: ../diskdrake.pm_.c:98
+msgid "Empty"
+msgstr "�����"
+
+#: ../diskdrake.pm_.c:98
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../diskdrake.pm_.c:98
+msgid "FAT"
+msgstr "FAT"
+
+#: ../diskdrake.pm_.c:98
+msgid "Other"
+msgstr "��ۦ"
+
+#: ../diskdrake.pm_.c:98
+msgid "Swap"
+msgstr "Swap"
+
+#: ../diskdrake.pm_.c:104
+msgid "Filesystem types:"
+msgstr "���� �������� ������:"
+
+#: ../diskdrake.pm_.c:113
+msgid "Details"
+msgstr "�������æ"
+
+#: ../diskdrake.pm_.c:127
+msgid ""
+"You have one big fat partition\n"
+"(generally use by MicroSoft Dos/Windows).\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"�� ������ ���� ������� �������� Ц����Ħ� ���� fat \n"
+"(���� � ��������� ����������դ���� ��������� MicroSoft Dos/Windows). \n"
+"��� ���Ҧ��� ������ �������� ���ͦ� ����� ���Ħ��\n"
+"(����Φ�� �� �����, � ��Ԧ� ����Φ�� �� \"�ͦ���� ���ͦ�\")"
+
+#: ../diskdrake.pm_.c:132
+msgid "Please make a backup of your data first"
+msgstr "����-�����, ����Ҧ�� �������� ������� ��Ц� ����� �����"
+
+#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
+#: ../diskdrake.pm_.c:487
+msgid "Read carefully!"
+msgstr "������� ������!"
+
+#: ../diskdrake.pm_.c:146
+#, c-format
+msgid "After %s partition %s,"
+msgstr "���� %s Ц����Ħ�� %s"
+
+#: ../diskdrake.pm_.c:146
+msgid "all data on this partition will be lost"
+msgstr "�Ӧ ��Φ �� ����� Ц����Ħ̦ ������ ������Φ"
+
+#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
+#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
+#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
+msgid "Error"
+msgstr "�������"
+
+#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
+msgid "Mount point: "
+msgstr "����� ����������: "
+
+#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
+msgid "Device: "
+msgstr "�����Ҧ�: "
+
+#: ../diskdrake.pm_.c:191
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "����� � ���: %s (����������)\n"
+
+#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
+msgid "Type: "
+msgstr "���: "
+
+#: ../diskdrake.pm_.c:193
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "�������: ������ %s\n"
+
+#: ../diskdrake.pm_.c:194
+#, c-format
+msgid "Size: %s MB"
+msgstr "���ͦ�: %s ��"
+
+#: ../diskdrake.pm_.c:196
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s �����Ҧ�"
+
+#: ../diskdrake.pm_.c:198
+#, c-format
+msgid "Cylinder %d to cylinder %d\n"
+msgstr "��� ��̦���� %d �� ��̦���� %d \n"
+
+#: ../diskdrake.pm_.c:199
+msgid "Formatted\n"
+msgstr "������������\n"
+
+#: ../diskdrake.pm_.c:200
+msgid "Not formatted\n"
+msgstr "�� ������������\n"
+
+#: ../diskdrake.pm_.c:201
+msgid "Mounted\n"
+msgstr "�����������\n"
+
+#: ../diskdrake.pm_.c:202
+#, c-format
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
+
+#: ../diskdrake.pm_.c:203
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"�����Ħ�, ���� ���� ����������������� ��� ������������ �������\n"
+" (��� ������������ ����, �� ��� lilo)\n"
+
+#: ../diskdrake.pm_.c:205
+#, c-format
+msgid "Level %s\n"
+msgstr "����� %s\n"
+
+#: ../diskdrake.pm_.c:206
+#, c-format
+msgid "Chunk size %s\n"
+msgstr "���ͦ� Ħ����� %s\n"
+
+#: ../diskdrake.pm_.c:207
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "����� RAID %s\n"
+
+#: ../diskdrake.pm_.c:224
+msgid "Please click on a partition"
+msgstr "����Φ��, ����-�����, �� Ц����Ħ̦"
+
+#: ../diskdrake.pm_.c:229
+#, c-format
+msgid "Size: %d MB\n"
+msgstr "���ͦ�: %d ��\n"
+
+#: ../diskdrake.pm_.c:230
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "������Ҧ�: %s ��̦��Ҧ�, %s �������, %s �����Ҧ�\n"
+
+#: ../diskdrake.pm_.c:232
+#, c-format
+msgid "on bus %d id %d\n"
+msgstr "�� ��Φ %d id %d\n"
+
+#: ../diskdrake.pm_.c:245
+msgid "Mount"
+msgstr "���������"
+
+#: ../diskdrake.pm_.c:246
+msgid "Active"
+msgstr "�������"
+
+#: ../diskdrake.pm_.c:247
+msgid "Add to RAID"
+msgstr "������ �� RAID"
+
+#: ../diskdrake.pm_.c:248
+msgid "Remove from RAID"
+msgstr "�������� � RAID"
+
+#: ../diskdrake.pm_.c:249
+msgid "Modify RAID"
+msgstr "�ͦ���� RAID"
+
+#: ../diskdrake.pm_.c:256
+msgid "Choose action"
+msgstr "����Ҧ�� Ħ�"
+
+#: ../diskdrake.pm_.c:349
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use LILO and it won't work, or you don't use LILO and you don't "
+"need /boot"
+msgstr ""
+"� �� ���� �������� /boot ��� צ������� �� ����� (�� ��̦��Ҧ, �����\n"
+"����� > 1024).\n"
+"��� �� ������ ������������� LILO � צ� �� ���� ���������, ��� �� ��\n"
+"������ ������������� LILO, ��Ħ ��� �� ���Ҧ��� �������Ҧ� /boot"
+
+#: ../diskdrake.pm_.c:353
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the LILO boot manager, be careful to add a /boot partition"
+msgstr ""
+"�����Ħ�, ���� �� ������� ��� ������ �� ��������� Ц����Ħ� (/)\n"
+"Ʀ����� ������������ ���� 1024-� ��̦����� ��������� �����. �Ҧ�\n"
+"����� �� �� ����� ��Ħ������ Ц����Ħ�� Ц� �������Ҧ� /boot. ���� ��\n"
+"����դ�� ��������������� LILO, �� �������� ������ Ц����Ħ� ��� /boot"
+
+#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "��ͦ��� ����� ������������� ``%s''"
+
+#: ../diskdrake.pm_.c:375
+msgid "Use ``Unmount'' first"
+msgstr "�������� ������������� ``������������''"
+
+#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
+msgid "changing type of"
+msgstr "�ͦ�� ���� "
+
+#: ../diskdrake.pm_.c:388
+msgid "Continue anyway?"
+msgstr "���-���� ������������?"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without saving"
+msgstr "����� ��� ������"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without writing the partition table?"
+msgstr "����� ��� ������ �����æ Ц����Ħ̦�?"
+
+#: ../diskdrake.pm_.c:412
+msgid "Change partition type"
+msgstr "�ͦ���� ��� Ц����Ħ��"
+
+#: ../diskdrake.pm_.c:413
+msgid "Which partition type do you want?"
+msgstr "���� ��� Ц����Ħ�� �� ������ ����������?"
+
+#: ../diskdrake.pm_.c:429
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "�� �� ������ ���������� �����Ҧ� %s?"
+
+#: ../diskdrake.pm_.c:451
+msgid "formatting"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:453
+msgid "Formatting"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
+#, c-format
+msgid "Formatting partition %s"
+msgstr "������������ Ц����Ħ�� %s"
+
+#: ../diskdrake.pm_.c:458
+msgid "After formatting all partitions,"
+msgstr "���� ������������ �Ӧ� Ц����Ħ̦�,"
+
+#: ../diskdrake.pm_.c:458
+msgid "all data on these partitions will be lost"
+msgstr "�Ӧ ��Φ �� ��� Ц����Ħ��� ���� ��������"
+
+#: ../diskdrake.pm_.c:468
+msgid "Move"
+msgstr "����ͦ�����"
+
+#: ../diskdrake.pm_.c:469
+msgid "Which disk do you want to move to?"
+msgstr "�� ���� ���� �� ������ ����ͦ�������?"
+
+#: ../diskdrake.pm_.c:473
+msgid "Sector"
+msgstr "������"
+
+#: ../diskdrake.pm_.c:474
+msgid "Which sector do you want to move to?"
+msgstr "�� ���� ������ ����ͦ�������?"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving"
+msgstr "����ͦ�����"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving partition..."
+msgstr "����ͦ��� Ц����Ħ�..."
+
+#: ../diskdrake.pm_.c:487
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "������� Ц����Ħ̦� ����� %s ���� �������� �� ����"
+
+#: ../diskdrake.pm_.c:489
+msgid "You'll need to reboot before the modification can take place"
+msgstr "��� �ͦ�� ������ Ħ��� ��� �̦� ������������� ����'����"
+
+#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
+msgid "Computing fat filesystem bounds"
+msgstr "�������� ��֦ Ц����Ħ�� FAT"
+
+#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
+#: ../install_steps_gtk.pm_.c:255
+msgid "Resizing"
+msgstr "�ͦ��� ���ͦ�"
+
+#: ../diskdrake.pm_.c:524
+msgid "resizing"
+msgstr "�ͦ��� ���ͦ�"
+
+#: ../diskdrake.pm_.c:534
+msgid "Choose the new size"
+msgstr "����Ҧ�� ����� ���ͦ�"
+
+#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:317
+#: ../install_steps_gtk.pm_.c:361
+msgid "MB"
+msgstr "��"
+
+#: ../diskdrake.pm_.c:587
+msgid "Create a new partition"
+msgstr "�������� ����� ���Ħ�"
+
+#: ../diskdrake.pm_.c:603
+msgid "Start sector: "
+msgstr "������� (������): "
+
+#: ../diskdrake.pm_.c:606
+msgid "Size in MB: "
+msgstr "���ͦ� (��): "
+
+#: ../diskdrake.pm_.c:609
+msgid "Filesystem type: "
+msgstr "��� Ц����Ħ��: "
+
+#: ../diskdrake.pm_.c:611
+msgid "Preference: "
+msgstr "���������: "
+
+#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
+msgid "Select file"
+msgstr "����Ҧ�� ����"
+
+#: ../diskdrake.pm_.c:664
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"���Ҧ��� ������� Ц����Ħ̦� ��� ����� ���ͦ�\n"
+"������������?"
+
+#: ../diskdrake.pm_.c:672
+msgid "Warning"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:673
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"������� ������� � �����צ�\n"
+"�Ӧ ��Φ �� æ� �����Ԧ ������ ������Φ"
+
+#: ../diskdrake.pm_.c:687
+msgid "Trying to rescue partition table"
+msgstr "������ צ������� ������� Ц����Ħ̦�"
+
+#: ../diskdrake.pm_.c:698
+msgid "device"
+msgstr "�����Ҧ�"
+
+#: ../diskdrake.pm_.c:699
+msgid "level"
+msgstr "Ҧ����"
+
+#: ../diskdrake.pm_.c:700
+msgid "chunk size"
+msgstr "���ͦ� Ħ�����"
+
+#: ../diskdrake.pm_.c:712
+msgid "Choose an existing RAID to add to"
+msgstr "����Ҧ�� �������� RAID, �� ����� ������"
+
+#: ../diskdrake.pm_.c:713
+msgid "new"
+msgstr "�����"
+
+#: ../fs.pm_.c:67 ../fs.pm_.c:73
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "%s ������������ %s ��������"
+
+#: ../fs.pm_.c:93
+#, c-format
+msgid "don't know how to format %s in type %s"
+msgstr "�� ���� �� ����������� %s ���� %s"
+
+#: ../fs.pm_.c:106
+msgid "nfs mount failed"
+msgstr "�� ���� ���������� NFS"
+
+#: ../fs.pm_.c:123
+msgid "mount failed: "
+msgstr "������� ����������: "
+
+#: ../fs.pm_.c:134
+#, c-format
+msgid "error unmounting %s: %s"
+msgstr "������� ������������� %s: %s"
+
+#: ../fsedit.pm_.c:219
+msgid "Mount points must begin with a leading /"
+msgstr "����� ���������� ������� ���������� � /"
+
+#: ../fsedit.pm_.c:222
+#, c-format
+msgid "There is already a partition with mount point %s"
+msgstr "��� � Ц����Ħ� � ������ ���������� %s"
+
+#: ../fsedit.pm_.c:306
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "�� ���� צ������ %s �� �����: %s"
+
+#: ../fsedit.pm_.c:388
+msgid ""
+"An error has occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"������� ������� - �� �������� צ���צ���� ���˦� ��� ��������� ������������� "
+"������. ����צ��� ����-����� ���� ������� � ���������צ������� ������� �����."
+
+#: ../fsedit.pm_.c:403
+msgid "You don't have any partitions!"
+msgstr "� ��� ����� ������� Ц����Ħ��!"
+
+#: ../help.pm_.c:7
+msgid "Choose preferred language for install and system usage."
+msgstr ""
+"����Ҧ�� ����, ��� �� ������ ������� ��� ����������Φ ������� �� ���\n"
+"����������Φ ��������"
+
+#: ../help.pm_.c:10
+msgid "Choose the layout corresponding to your keyboard from the list above"
+msgstr "����Ҧ�� צ���צ��� ��������� ���צ����� �� ������"
+
+#: ../help.pm_.c:13
+msgid ""
+"Choose \"Install\" if there are no previous versions of Linux\n"
+"installed, or if you wish to use multiple distributions or versions.\n"
+"\n"
+"\n"
+"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
+"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
+"(Helios) or Gold 2000."
+msgstr ""
+"���� ��Φ�� �� ���� ����������� ����ϧ ������� � ������� ��� ���� ��������\n"
+"���� ˦���� Ҧ���� ���Ӧ� ������ ����Ҧ�� \"���������\".\n"
+"\n"
+"���� �� ������ �������� ��Φ�� ���������Φ ���Ӧ� Mandrake ������: \n"
+"5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
+"Gold 2000 ����Ҧ��\"����������\""
+
+#: ../help.pm_.c:22
+msgid ""
+"Select:\n"
+"\n"
+" - Recommended: If you have never installed Linux before.\n"
+"\n"
+"\n"
+" - Customized: If you are familiar with Linux, you will be able to \n"
+"select the usage for the installed system between normal, development or\n"
+"server. Choose \"Normal\" for a general purpose installation of your\n"
+"computer. You may choose \"Development\" if you will be using the computer\n"
+"primarily for software development, or choose \"Server\" if you wish to\n"
+"install a general purpose server (for mail, printing...).\n"
+"\n"
+"\n"
+" - Expert: If you are fluent with GNU/Linux and want to perform\n"
+"a highly customized installation, this Install Class is for you. You will\n"
+"be able to select the usage of your installed system as for \"Customized\"."
+msgstr ""
+"����Ҧ��:\n"
+"\n"
+" - ��������������: ���� �� ���� �� ����� �� ������������� �����.\n"
+"\n"
+"\n"
+" - ���æ������: ���� �� �����ͦ � �������, �� ������� ����������\n"
+"Ҧ���� ������������ ������������ ����Ԧ� ��˦, �� ���������, ���������\n"
+"�� ������. ����Ҧ�� \"���������\", ��� ���������� ������������ �������,\n"
+"�� ������������ ����'������. ���� �� ������ ��������������� ������� �\n"
+"��������� ��� ��������, ����Ҧ�� \"���������\". ��� ����Ҧ�� \"������\",\n"
+"���� �� ������ ���������� ������ ���������� ����������� (���\n"
+"���������ϧ �����, �����-������...).\n"
+"\n"
+"\n"
+" - �������: ���� �� צ���� ��������� � ��������ݦ GNU/Linux � ������\n"
+"���������� �������, ��� �� ��� �������� - ��� ���Ӧ� �������� ���\n"
+"���. �� ������� ���������� ��æ� ������������ ���ϧ �������, ��\n"
+"\"�������\""
+
+#: ../help.pm_.c:40
+msgid ""
+"DrakX will attempt at first to look for one or more PCI\n"
+"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
+"to use, it will insert it (them) automatically.\n"
+"\n"
+"\n"
+"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
+"doesn't know which driver to use for this card, or if you have no\n"
+"SCSI adapters at all, you will then be prompted on whether you have\n"
+"one or not. If you have none, answer \"No\". If you have one or more,\n"
+"answer \"Yes\". A list of drivers will then pop up, from which you\n"
+"will have to select one.\n"
+"\n"
+"\n"
+"After you have selected the driver, DrakX will ask if you\n"
+"want to specify options for it. First, try and let the driver\n"
+"probe for the hardware: it usually works fine.\n"
+"\n"
+"\n"
+"If not, do not forget the information on your hardware that you\n"
+"could get from your documentation or from Windows (if you have it\n"
+"on your system), as suggested by the installation guide. These\n"
+"are the options you will need to provide to the driver."
+msgstr ""
+"��� ������� DrakX �����դ צ������� ���� ��� ¦���� ���� PCI\n"
+"SCSI. ���� �� ������ �������� � DrakX ����, �˦ ��������\n"
+"��������������� ��� ��� ����, צ� ����������� �� �����������. \n"
+"\n"
+"���� SCSI �����, ���� �� ������դ���� � ISA ������, ��� ����� PCI\n"
+"������, ��� ��� DrakX �� ����, ��� � ���� �������, ���� �� �� �����\n"
+"SCSI ����, �� �������� ����������, �� ��� ����� צ���צ���, ��\n"
+"���������, �� ����� �� ���� �����, �� Φ.\n"
+"���� �� �� ����� �����, ����� צ���צ�� \"�\". ���� � ���\n"
+"����������� ���� ��� ˦���� ����� ����, ����� צ���צ��\n"
+"\"���\". ���� ����� �'������� ������ ������Ҧ�. ��� ���Ҧ��� �������\n"
+"���� ������� � ����� ������.\n"
+"\n"
+"���� ����, �� �� �������� �������, DrakX ������ ���, �� �� ������ ��\n"
+"������� ��������� ��� �����. �������� ����� ����� �������� ����������\n"
+"���� ���������: � ¦�����Ԧ �����˦� �� ��������դ.\n"
+"\n"
+"���� � Φ - �� ��������, �� �������æ� ��� Ԧ ������ϧ, �˦ � ���\n"
+"���������Φ, �� ������ Ħ����� � Windows (����, צ� � ���, ��������,\n"
+"������������), ��� �� �� ������������� ��Ҧ�������� �� �������æ. �\n"
+"��������� �� �����Φ ������� ��������."
+
+#: ../help.pm_.c:64
+msgid ""
+"At this point, you may choose what partition(s) to use to install\n"
+"your Linux-Mandrake system if they have been already defined (from a\n"
+"previous install of Linux or from another partitionning tool). In other\n"
+"cases, hard drive partitions must be defined. This operation consists of\n"
+"logically dividing the computer's hard drive capacity into separate\n"
+"areas for use.\n"
+"\n"
+"\n"
+"If you have to create new partitions, use \"Auto allocate\" to "
+"automatically\n"
+"create partitions for Linux. You can select the disk for partitionning by\n"
+"clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"\n"
+"Two common partition are: the root partition (/), which is the starting\n"
+"point of the filesystem's directory hierarchy, and /boot, which contains\n"
+"all files necessary to start the operating system when the\n"
+"computer is first turned on.\n"
+"\n"
+"\n"
+"Because the effects of this process are usually irreversible, partitioning\n"
+"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
+"simplifies the process so that it need not be. Consult the documentation\n"
+"and take your time before proceeding."
+msgstr ""
+"����� �� ������ ������� Ц����Ħ�� �� �����, �� �� ������\n"
+"������������� ���� ������� �����-Mandrake, ���� ��˦ ���Ħ�� ���\n"
+"�������Φ (צ� ���������ϧ ��������� ������ ��� ���� �� ���Ħ����\n"
+"���� ������ ��������). � ����� �������� �� �����Φ �������� ���Ħ�� ��\n"
+"�����. �� �����æ� �����Ħ�Ѥ ��Φ��� �Ӧ� ���˦� ����'����� � ˦����\n"
+"������� �������� ��� ������������.\n"
+"\n"
+"\n"
+"���� ��� ����� �������� ��צ Ц����Ħ��, ������������� �������\n"
+"\"����������� ����������\" ��� ����������� �������� ����Ȧ�Φ ���\n"
+"������ Ц����Ħ��. �� ������ ������� ����, ��� �����Ħ�� ��\n"
+"Ц����Ħ��, ��������� �� \"hda\" ��� ������� ������ ���� ���� IDE, \"hdb\"\n"
+"��� ������� ������ IDE ����, ��� ������ �� \"sda\" ��� ������ �������\n"
+"SCSI �����.\n"
+"\n"
+"\n"
+"��� Ц����Ħ��, �� �������� �������, �� - �������� ������� ������\n"
+"(/), � ��ϧ ����������� ��� �����Ȧ� �������Ҧ� ������ϧ �������, ��\n"
+"Ц����Ħ� /boot, � ����� ����������� �Ӧ �����, ����Ȧ�Φ ��� ����,\n"
+"��� ����'���� ������������ ��� ������Φ.\n"
+"\n"
+"\n"
+"�ͦ�� צ� æ�� �����æ� ������ ������� ��������Φ, � ���� ����� �����\n"
+"���� ��������� ��� �����צ������� �����������. DiskDrake �Φ���\n"
+"�����Ҧ��� �����Φ��� � ����� �������. ����Φ���� �� ���������æ� �\n"
+"����� ���ަ�� �� ����, Φ� ���������� �� �����."
+
+#: ../help.pm_.c:90
+msgid ""
+"Any partitions that have been newly defined must be formatted for\n"
+"use (formatting meaning creating a filesystem). At this time, you may\n"
+"wish to re-format some already existing partitions to erase the data\n"
+"they contain. Note: it is not necessary to re-format pre-existing\n"
+"partitions, particularly if they contain files or data you wish to keep.\n"
+"Typically retained are /home and /usr/local."
+msgstr ""
+"�Ӧ Ԧ Ц����Ħ��, �˦ ���� �����Ħ��Φ �� ������������ ���Ц,\n"
+"����� ���� צ����������Φ, ����, Φ� ���� ����� ���� �������������\n"
+"(������������ ������� ��������� ������ϧ �������). �� ��� �����, ��\n"
+"����� ������ צ������������ ��� ���������� ���������Φ ���Ħ�� ���\n"
+"����, ��� ������ Ԧ ��Φ, �� ��� ������Φ. ���ͦ����: �����\n"
+"����Ȧ����Ԧ � ����'�������� ����������Φ Ԧ Ц����Ħ��, ��\n"
+"���������� ��������. ��������, ���� �� ��� ���Ҧ������� ��Φ, �˦ ��\n"
+"��Ԧ�� � �������� �������������. \n"
+"������Ԧ�� ����������� צ� ������������ ����� ���Ħ̦�, �� /home ��\n"
+"/usr/local."
+
+#: ../help.pm_.c:98
+msgid ""
+"You may now select the packages you wish to install.\n"
+"\n"
+"\n"
+"First you can select group of package to install or upgrade. After that\n"
+"you can select more packages according to the total size you wish to\n"
+"select.\n"
+"\n"
+"\n"
+"If you are in expert mode, you can select packages individually.\n"
+"Please note that some packages require the installation of others.\n"
+"These are referred to as package dependencies. The packages you select,\n"
+"and the packages they require will be automatically selected for\n"
+"install. It is impossible to install a package without installing all\n"
+"of its dependencies."
+msgstr ""
+"����� �� ������ ������� �������Φ ������ ��� ���������.\n"
+"\n"
+"\n"
+"�������� �� ������ ������� ����� ������ ��� ��������� ��\n"
+"����������. ���� ����� �� ������ ������� ¦���� ����Ԧ� � ��������Ԧ\n"
+"צ� ���������� ��'��� ����Ԧ�, �� �� ������ �������.\n"
+"\n"
+"\n"
+"���� �� ����������� � ����ͦ ��������, �� ������ ������� ����ͦ\n"
+"������. ���'������, �� ��������� ������ ����Ԧ� ������� ���������ϧ\n"
+"��������� ����� ����Ԧ�. �� ��������� �����Φ��� ����Ԧ�. �� ������,\n"
+"�˦ �� �������� � Ԧ ������, צ� ���� ���� �������� ������ �����Φ\n"
+"����������� ��� ���������. ����� ��������� ���������� ��� ���������\n"
+"�Ӧ� ����Ԧ�, צ� ���� צ� ��������."
+
+#: ../help.pm_.c:114
+msgid ""
+"The packages selected are now being installed. This operation\n"
+"should take a few minutes unless you have chosen to upgrade an\n"
+"existing system, in that case it can take more time even before\n"
+"upgrade starts."
+msgstr ""
+"�����Φ ������ ����� ��������������. �� �����æ� ��� ������� ˦����\n"
+"������, ���� �� �� ������� ��æ� ��� ���������� ������ϧ �������. �\n"
+"����� ������� �� ����� ¦���� ���� ��צ�� �� ������� ����������."
+
+#: ../help.pm_.c:120
+msgid ""
+"If DrakX failed to find your mouse, or if you want to\n"
+"check what it has done, you will be presented the list of mice\n"
+"above.\n"
+"\n"
+"\n"
+"If you agree with DrakX' settings, just jump to the section\n"
+"you want by clicking on it in the menu on the left. Otherwise,\n"
+"choose a mouse type in the menu which you think is the closest\n"
+"match for your mouse.\n"
+"\n"
+"\n"
+"In case of a serial mouse, you will also have to tell DrakX\n"
+"which serial port it is connected to."
+msgstr ""
+"���� DrakX �� �ͦ� ������ ���� �����, ���, ���� �� ������ ����צ����,\n"
+"��� ���� צ� ������, ��� ���� ������ ������ �� ������ �����.\n"
+"\n"
+"\n"
+"���� ��� �������դ ��¦�, ��������� DrakX, ������ �����Ħ�� ��\n"
+"���Ҧ����� ���Ħ�� ���������, ��������� �� ���Ҧ���� ����� ����\n"
+"̦�����. ���� � Φ, ����Ҧ�� �� ������ ��� ��� �����, ���� �� ����\n"
+"����� � ���������� ���� ���� �����, �� �� �����.\n"
+"\n"
+"\n"
+"�Ҧ� ����, ���� �� ����� �����, �'������ � ���̦������ ������, ���\n"
+"����� ���� �������, �� ����� � ���Ԧ� �� ����� Ц��������."
+
+#: ../help.pm_.c:135
+msgid ""
+"Please select the correct port. For example, the COM1 port in MS Windows\n"
+"is named ttyS0 in Linux."
+msgstr ""
+"����-�����, ����Ҧ�� צ���� ����. ���������, ���� Ц� ������ COM1 � MS\n"
+"Windows ������ ����� ttyS0 � ����Ӧ."
+
+#: ../help.pm_.c:139
+msgid ""
+"This section is dedicated to configuring a local area\n"
+"network (LAN) or a modem.\n"
+"\n"
+"Choose \"Local LAN\" and DrakX will\n"
+"try to find an Ethernet adapter on your machine. PCI adapters\n"
+"should be found and initialized automatically.\n"
+"However, if your peripheral is ISA, autodetection will not work,\n"
+"and you will have to choose a driver from the list that will appear then.\n"
+"\n"
+"\n"
+"As for SCSI adapters, you can let the driver probe for the adapter\n"
+"in the first time, otherwise you will have to specify the options\n"
+"to the driver that you will have fetched from documentation of your\n"
+"hardware.\n"
+"\n"
+"\n"
+"If you install a Linux-Mandrake system on a machine which is part\n"
+"of an already existing network, the network administrator will\n"
+"have given you all necessary information (IP address, network\n"
+"submask or netmask for short, and hostname). If you're setting\n"
+"up a private network at home for example, you should choose\n"
+"addresses.\n"
+"\n"
+"\n"
+"Choose \"Dialup with modem\" and the Internet connection with\n"
+"a modem will be configured. DrakX will try to find your modem,\n"
+"if it fails you will have to select the right serial port where\n"
+"your modem is connected to."
+msgstr ""
+"� ����� ���Ħ̦ �� ������ ����Ʀ�������� �������� ������ (LAN) ���\n"
+"�����.\n"
+"\n"
+"���� �� �������� \"LAN\" � ����� ����Ԧ, DrakX �����դ צ������� �����\n"
+"Ethernet � ��ۦ� �����ͦ. �Ӧ ����� PCI ������ ���� ������Φ ��\n"
+"�Φæ�̦����Φ �����������. �����, ���� ���� ����� �������� �� �����\n"
+"ISA, ����������� ���������� ���� �� ����������, � ��� ���Ҧ��� ����\n"
+"������� ������� ��� � ����� �� ���� ������, ���� ��� ���� ��������\n"
+"\n"
+"\n"
+"�� ����դ���� ������Ҧ� SCSI, �� ������ ��������� �������� �����������\n"
+"�����, ��� ��ͦ��� ����� ������� ��� ����� �������� ���Ҧ�Φ\n"
+"���������, �˦ �� ������ Ħ������� � ���������æ� � ������ ����������\n"
+"������������.\n"
+"\n"
+"\n"
+"���� �� ������������ Mandrake ����� �� ����'���Ҧ, �� � �������� ���\n"
+"������ϧ ����֦, צ� ��ͦΦ�������� ����֦ ��� ���Ҧ��� ���� ��������\n"
+"����Ȧ�Φ ��Φ ���� ��������� ���ϧ ������� (IP ������, ����� ����֦\n"
+",��, �� ������ \"netmask\", �� ��'� ����� �����). ���� � �� ������������\n"
+"���� �������� ������ � ���� �����, ���������, �� ����� ������� �Ӧ\n"
+"������ �����Ԧ���.\n"
+"\n"
+"\n"
+"����Ҧ�� \"��'���� ����� �����\" � ��� ����� �� �'������� � ����������\n"
+"������ ����������� ����Ʀ������Φ. DrakX �����դ ������ ��� �����. \n"
+"���� �� �� ��������, ��� ���Ҧ��� ���� ������� צ���� ���̦������ ����, \n"
+"�� ����� ��������� ��� �����."
+
+#: ../help.pm_.c:169
+msgid ""
+"Enter:\n"
+"\n"
+" - IP address: if you don't know it, ask your network administrator or "
+"ISP.\n"
+"\n"
+"\n"
+" - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
+"sure, ask your network administrator or ISP.\n"
+"\n"
+"\n"
+" - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
+"this option. If selected, no value is needed in \"IP address\". If you are\n"
+"not sure, ask your network administrator or ISP.\n"
+msgstr ""
+"���Ħ��:\n"
+"\n"
+" - IP ������: ���� �� �� ������ ��� ����, ��������� � ������\n"
+"��ͦΦ�������� ����֦\n"
+"\n"
+"\n"
+" ����� ����֦: � ���������� ������� \"255.255.255.0\" � ���������\n"
+"�������. ���� �� ���Φ�������, �������� � ��ͦΦ�������� ����֦.\n"
+"\n"
+"\n"
+" - ������������ ��¦� IP: ����Ҧ�� ��� �����, ���� ���� ������\n"
+"����������դ �������� dhcp. ���� �� ���Φ�������, �������� �\n"
+"��ͦΦ�������� ����֦.\n"
+
+#: ../help.pm_.c:184
+msgid ""
+"You may now enter dialup options. If you're not sure what to enter, the\n"
+"correct information can be obtained from your ISP."
+msgstr ""
+"����� �� ������ ������ ��������� ��� �'������� �� ������. ���� ��\n"
+"���Φ�������, �� ��� ����� �������, �� �������æ� ���� ���� ��������\n"
+"צ� ������ ��������-����������."
+
+#: ../help.pm_.c:188
+msgid ""
+"If you will use proxies, please configure them now. If you don't know if\n"
+"you will use proxies, ask your network administrator or your ISP."
+msgstr ""
+"���� �� ������ ������������� ����Ӧ, ����-�����, ����Ʀ������� ��\n"
+"���. ���� �� �� ������, �� �� ������ ���� �������������, Ħ��������\n"
+"��� �� � ������ ��ӦΦ�������� ����֦, ��� � ��������-����������."
+
+#: ../help.pm_.c:192
+msgid ""
+"You can install cryptographic package if your internet connection has been\n"
+"set up correctly. First choose a mirror where you wish to download packages "
+"and\n"
+"after that select the packages to install.\n"
+"\n"
+"Note you have to select mirror and cryptographic packages according\n"
+"to your legislation."
+msgstr ""
+"���� ���� �'������� � ���������� ����������� ��������, �� ������\n"
+"���������� ����� ��� ���������Ʀ�. �������� ����Ҧ�� ������\n"
+"(��������), � ����� �� ������ ���������� ������, � ��Ԧ� ����Ҧ��\n"
+"������, �˦ �� ������ ����������.\n"
+"\n"
+"��������, �� �� ����� ������� ������� �� ������ ��� ��������� �\n"
+"��������Ԧ צ� ������������� ���ϧ ������."
+
+#: ../help.pm_.c:200
+msgid ""
+"You can now select your timezone according to where you live.\n"
+"\n"
+"\n"
+"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
+"in local time according to the time zone you have selected."
+msgstr ""
+"� ��������Ԧ צ� ���� �� �� ������, �� ������ ����� ������� ������� ����.\n"
+"\n"
+"\n"
+"����� ������Ѥ ��� צ������ �� ���� �� �Ҧ�צ�� (GMT ��� \"Greenwich\n"
+"Meridian Time\") � ���������� ���� � ͦ������ ��� � צ���צ����Ԧ ��\n"
+"�������� �����, � ����� �� �����������."
+
+#: ../help.pm_.c:207
+msgid "Help"
+msgstr "�������"
+
+#: ../help.pm_.c:210
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer. The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+"����� ���� ��������� � ���������� ˦��˦��� ������Ҧ�. ����� � ���\n"
+"������� ��Ц� ������Ҧ� ������� �����ϧ ���������.\n"
+"\n"
+"\n"
+"���� ��� ������� ������������� ��������� �� ������ ����'�����,\n"
+"����Ҧ�� \"��������� �������\". ��� ���Ҧ��� ���� �������, �� �����\n"
+"����� ��� ������� Ц��������� � ������� ����� צ���צ���� Ʀ���� ���\n"
+"�����. \n"
+"\n"
+"\n"
+"���� �������, �� ���� �� ������ ���������, ����������� �� ������\n"
+"����'���Ҧ � UNIX'��, ��� �̦� ������� \"��������� ����� �����\n"
+"lpq\". ��� ����, ��� ��������� �� ����� ������Ҧ, ��� �� ���Ҧ���\n"
+"���� �צ� ������� �� ������ �� צ��������� ����'���Ҧ, ��� ����ͦ���\n"
+"�� �����Φ ����� ����� צ������ϧ ����� �� ���� �����Ҧ. \n"
+"\n"
+"\n"
+"���� ��� ���Ҧ��� ��������� �� SMB ������� (�� �������, �������\n"
+"Ц�'������� �� ����'����� � Windows 9x/NT), ��� ���Ҧ��� ���� �������\n"
+"���� SMB ��'� (�� ��'� צ�Ҧ��Ѥ���� צ� TCP/IP ���Φ), � �������\n"
+"����� ���� IP ������, � ����� ��'� �����������, ������ ����� ��\n"
+"������ ���Ҧ�Φ ��� ������� �� ��������, �, ��������-� ��'�\n"
+"��������. ��� ���� ����դ���� �������� ��� NetWare, �Ҧ� ����, �� ���\n"
+"�� ���Ҧ��� ���� �������æ� ��� ����ަ �����"
+
+#: ../help.pm_.c:233
+msgid ""
+"You can now enter the root password for your Linux-Mandrake\n"
+"system. The password must be entered twice to verify that both\n"
+"password entries are identical.\n"
+"\n"
+"\n"
+"Root is the administrator of the system, and is the only user\n"
+"allowed to modify the system configuration. Therefore, choose\n"
+"this password carefully! Unauthorized use of the root account can\n"
+"be extremely dangerous to the integrity of the system and its data,\n"
+"and other systems connected to it. The password should be a\n"
+"mixture of alphanumeric characters and a least 8 characters long. It\n"
+"should *never* be written down. Do not make the password too long or\n"
+"complicated, though: you must be able to remember without too much\n"
+"effort."
+msgstr ""
+"����� ��� ���Ҧ��� �צަ ������ ������ ��� ����������� \"root\" ���\n"
+"���ϧ ������� Mandrake �����. ������ ���Ҧ��� ������� �צަ, ���\n"
+"������������, �� צ� ��� �������� ������ ���� ���� � ��� ��\n"
+"\n"
+"\n"
+"Root - �� ��ͦΦ������� ������� � ������ ����������, ����� ���������\n"
+"�ͦ������ �������� ���Ʀ����æ�. ���� ��������� ��� ������ ����\n"
+"��������! �������������� ������������ ����� �������� ���� ����\n"
+"����������� ����������� ��� æ̦����Ԧ ������� �� ����� � Φ�, �\n"
+"����� ��� ����� ������ �� �ŧ Ц���������. ������ ������� ����������\n"
+"�� ��ͦۦ ����צ���-�������� �����̦� � ���� �� �����, Φ� 8 �����̦�\n"
+"���������. ���� *����* �� ����� �� ����������. �� ���������\n"
+"������� ������ ������ ��� ������� ��������: ��� ����� ����\n"
+"���'�����."
+
+#: ../help.pm_.c:249
+msgid ""
+"To enable a more secure system, you should select \"Use shadow file\" and\n"
+"\"Use MD5 passwords\"."
+msgstr ""
+"��� ������������ ¦������ Ҧ��� ������� ��� �������, ��� �̦� �������\n"
+"\"��������������� Ԧ���צ ����̦\" �� \"������������� �������� MD5\"."
+
+#: ../help.pm_.c:253
+msgid ""
+"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
+"network administrator."
+msgstr ""
+"����Ҧ�� \"��������������� NIS\", ���� � ��ۦ� ����֦ NIS\n"
+"����������դ����. ���� �� �� ������, �������� � ����� ��ͦΦ��������\n"
+"����֦."
+
+#: ../help.pm_.c:257
+msgid ""
+"You may now create one or more \"regular\" user account(s), as\n"
+"opposed to the \"privileged\" user account, root. You can create\n"
+"one or more account(s) for each person you want to allow to use\n"
+"the computer. Note that each user account will have its own\n"
+"preferences (graphical environment, program settings, etc.)\n"
+"and its own \"home directory\", in which these preferences are\n"
+"stored.\n"
+"\n"
+"\n"
+"First of all, create an account for yourself! Even if you will be the only "
+"user\n"
+"of the machine, you may NOT connect as root for daily use of the system: "
+"it's a\n"
+"very high security risk. Making the system unusable is very often a typo "
+"away.\n"
+"\n"
+"\n"
+"Therefore, you should connect to the system using the user account\n"
+"you will have created here, and login as root only for administration\n"
+"and maintenance purposes."
+msgstr ""
+"����� �� ������ �������� ���� ��� ¦���� \"���������\" �����˦� ���\n"
+"���������ަ� (�� \"���צ���������\" �� root �����˦�). �� ������\n"
+"�������� ���� ��� ¦���� �����˦� ��� ������� � ���������ަ� ���ϧ\n"
+"�������. ���ͦ����, �� ����� ������� �� ��������� ���� ���� ���� ��ϧ\n"
+"����Φ ��������� (��˦, �� ���Ʀ��� ����������, ��������� �������,\n"
+"����) � ���� ������ \"������� �������Ҧ�\", �� ���Ҧ������� �Ӧ æ\n"
+"���������.\n"
+"\n"
+"\n"
+"���� �� ��� ����Ҧ�� ������� ��� ���� ������! ��צ��, ���� �� ������\n"
+"������ ������������ æ�� �������, �� �� ������ ������������� ��Ϥ�\n"
+"�������� �� root ��� �������ϧ ������: �� ���� ������� �����. ���\n"
+"������� ���� ������� ����������� ���� ����� ��������� ���� �������\n"
+"��� �����.\n"
+"\n"
+"\n"
+"����, �� ������ �Ť���������� � �����ͦ �� ��ϧ� ������� ������ ��\n"
+"�������, �˦ �� ��������, �� �Ť���������� � �����ͦ �� root ���\n"
+"��ͦΦ����æ�."
+
+#: ../help.pm_.c:276
+msgid ""
+"It is strongly recommended that you answer \"Yes\" here. If you install\n"
+"Microsoft Windows at a later date it will overwrite the boot sector.\n"
+"Unless you have made a bootdisk as suggested, you will not be able to\n"
+"boot into Linux any more."
+msgstr ""
+"�� ���Ԧ����� ��������դ�� ��� ���� ��� צ���צ�� \"���\". ���� ��\n"
+"���������� Ц�Φ�� Micrososft Windows �� ������ ����'���Ҧ, ��\n"
+"��������� ������� ���������������� ������. ���� � ��� �� ���� �������\n"
+"��� ������������, �� �� ������� ������������� � �����."
+
+#: ../help.pm_.c:282
+msgid ""
+"You need to indicate where you wish\n"
+"to place the information required to boot to Linux.\n"
+"\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of\n"
+"drive (MBR)\"."
+msgstr ""
+"�� �����Φ �������, �� ���� �� ������ �������� �������æ� ���Ҧ���\n"
+"��� ������������ ������.\n"
+"\n"
+"\n"
+"�Ҧ� ���� �������, ���� �� ��������� ������Φ � ����, �� �� ������,\n"
+"����Ҧ�� \"������ ������ ����� (MBR)\"."
+
+#: ../help.pm_.c:290
+msgid ""
+"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
+"(the master drive on the primary channel)."
+msgstr "������Ԧ��� ��¦� - �� \"/dev/hda\" (������ ���� �� ������� ����̦)."
+
+#: ../help.pm_.c:294
+msgid ""
+"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
+"Normally they are correctly detected during installation. If you don't\n"
+"see yours detected, you can add one or more now.\n"
+"\n"
+"\n"
+"If you don't want that everybody could access at one of them, you can "
+"remove\n"
+"it now (a boot disk will be needed to boot it)."
+msgstr ""
+"LILO (LInux LOader) ���� ������������� ��ۦ �����æ�Φ �������. �\n"
+"¦�����Ԧ �����˦� ���� צ��� ������������ Ц� ��� ���������\n"
+"�������. ���� �� �� ������ ���ϧ ������� � ������, �� ������ ������ ��\n"
+"�����.\n"
+"\n"
+"\n"
+"���� �� �� ������, ��� ����� ͦ� ����������� ���� �� ��� ������, ��\n"
+"������ ������� �� ����� �� ������ (��� �� ������������ ���Ҧ��� ����\n"
+"�������)."
+
+#: ../help.pm_.c:303
+msgid ""
+"LILO main options are:\n"
+" - Boot device: Sets the name of the device (e.g. a hard disk\n"
+"partition) that contains the boot sector. Unless you know specifically\n"
+"otherwise, choose \"/dev/hda\".\n"
+"\n"
+"\n"
+" - Linear: Generate linear sector addresses instead of\n"
+"sector/head/cylinder addresses. Linear addresses are translated at run\n"
+"time and do not depend on disk geometry. Note that boot disks may not be\n"
+"portable if \"linear\" is used, because the BIOS service to determine the\n"
+"disk geometry does not work reliably for floppy disks. When using\n"
+"\"linear\" with large disks, /sbin/lilo may generate references to\n"
+"inaccessible disk areas, because 3D sector addresses are not known\n"
+"before boot time.\n"
+"\n"
+"\n"
+" - Compact: Tries to merge read requests for adjacent sectors into a\n"
+"single read request. This drastically reduces load time and keeps the\n"
+"map smaller. Using \"compact\" is especially recommended when booting from\n"
+"a floppy disk.\n"
+"\n"
+"\n"
+" - Delay before booting default image: Specifies the number in tenths\n"
+"of a second the boot loader should wait before booting the first image.\n"
+"This is useful on systems that immediately boot from the hard disk after\n"
+"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
+"omitted or is set to zero.\n"
+"\n"
+"\n"
+" - Video mode: This specifies the VGA text mode that should be selected\n"
+"when booting. The following values are available: \n"
+" * normal: select normal 80x25 text mode.\n"
+" * <number>: use the corresponding text mode."
+msgstr ""
+"�����Φ ��������� ��� LILO:\n"
+" - �����Ҧ� ��������������: ���������� ����� �������� (���������,\n"
+"���Ħ� ��������� �����), ���� ͦ����� ���������������� ������. ���� ��\n"
+"������� �� ������, �� ����� ������� ������, ���֦�� \"/dev/hda\" ���.\n"
+"\n"
+"\n"
+" - �Φ����: ���������� ̦Φ�Φ ������ �����Ҧ� �� ����� ��ͦ���\n"
+"������ ���� ������/�������/��̦���. �Φ�Φ ������ ������������ Ц�\n"
+"��� ������ � �� �������� צ� ������Ҧ� �����. ���ͦ����, �� ���\n"
+"����������Φ ����� ������, ���Ҧ��� ������� ������� �� ����� ����\n"
+"��������������� �� ������ ����'���Ҧ, ���� �� BIOS �� ���� ��������\n"
+"��������� ������Ҧ� ������� � �����Φ� �������� ��Ħ����Ԧ. ���\n"
+"����������Φ ̦Φ����� ������ � �������� �������, \"/sbin/lilo\" ����\n"
+"����������� ������ �� ��������Φ �����Ԧ �����, ����� ��, ��\n"
+"�������ͦ�Φ ������ �����Ҧ� �� �� צ��ͦ �� ������������ �������.\n"
+"\n"
+" - ����������: ����������� ��'������ ������ �� ������� ��Ӧ�Φ�\n"
+"�����Ҧ� � ���� ����� �� �������. �� ������ ������դ ��� ������������\n"
+"�� ������ ���� ������. �������� ��������դ���� �������������\n"
+"���������� \"����������\" ��� ����������Φ � �������.\n"
+"\n"
+"\n"
+" - ����� ����� ������������� ������ϧ �������: �������� ��� �\n"
+"�������� Ҧ���� ��Φ� ����Ԧ� �������, ���� ������� ���� ������ ����,\n"
+"Φ� ������ ������������ ������ϧ �������, ������ϧ � ���Ʀ����æ�. ��\n"
+"����� ��������������� � ��� ��������, ���� ������� ����� � ���������\n"
+"�� ������������ ������� Ц��� �Φæ�̦��æ� ���צ�����.\n"
+"\n"
+"\n"
+" - ����� �����: ����դ צ��� ����� VGA, ���� ���Ҧ��� �������� ���\n"
+"����������Φ �������. ���� ���� ��˦ ��������:\n"
+" * ����������: ���������� ��������� ��������� ����� 80x25.\n"
+" * <�����>: ���������� צ���צ���� ��������� �����."
+
+#: ../help.pm_.c:338
+msgid ""
+"Now it's time to configure the X Window System, which is the\n"
+"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
+"you must configure your video card and monitor. Most of these\n"
+"steps are automated, though, therefore your work may only consist\n"
+"of verifying what has been done and accept the settings :)\n"
+"\n"
+"\n"
+"When the configuration is over, X will be started (unless you\n"
+"ask DrakX not to) so that you can check and see if the\n"
+"settings suit you. If they don't, you can come back and\n"
+"change them, as many times as necessary."
+msgstr ""
+"����� ��� ��������� ���Ʀ����æ�� ������� X Window, ��� ������ �\n"
+"���æ ���Ʀ����� ���������� (GUI - Graphical User Interface)\n"
+"������. ��� ����� ��� ���Ҧ��� ����Ʀ�������� ���� צ�������� ��\n"
+"��Φ���. ���ۦ��� ���˦� ��� ����� ������������Φ, ���� �����\n"
+"������� ���� � ���������� � ����צ�æ ���������� �������Ҧ� �� �\n"
+"צ���צ��� \"���\" :)\n"
+"\n"
+"\n"
+"���� ��˦������ ���Ʀ��������� X �����դ (���� �� �� ������� DrakX\n"
+"����������), ���� �� ������� ����צ���� � ����������, �� �Ӧ ��ۦ\n"
+"��������� צ�Φ. ���� ��� �� Ц������� æ ���������, �� ������\n"
+"����������� ����� � �ͦ������ �� ����-��� ˦��˦��� ��ڦ�. "
+
+#: ../help.pm_.c:351
+msgid ""
+"If something is wrong in X configuration, use these options to correctly\n"
+"configure the X Window System."
+msgstr ""
+"���� �� ���Ʀ����æ�� X Window ���� �� ��������, ������������� ����\n"
+"��æ��� ��� ����, ��� צ��� ���������� X Window."
+
+#: ../help.pm_.c:355
+msgid ""
+"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
+"\"No\"."
+msgstr ""
+"���� �� ������ �Ť���������� � �����ͦ � ���Ʀ����� ������, ����Ҧ��\n"
+"\"���\". ������ - ����Ҧ�� \"�\"."
+
+#: ../help.pm_.c:359
+msgid ""
+"You can now select some miscellaneous options for you system.\n"
+"\n"
+" - Use hard drive optimizations: This option can improve hard disk\n"
+"accesses but is only for advanced users, it can ruin your hard drive if\n"
+"used incorrectly. Use it only if you know how.\n"
+"\n"
+"\n"
+" - Choose security level: You can choose a security level for your\n"
+"system.\n"
+" Please refer to the manual for more information.\n"
+"\n"
+"\n"
+" - Precise RAM size if needed: In some cases, Linux is unable to\n"
+"correctly detect all the installed RAM on some systems. If this is the\n"
+"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
+"normal.\n"
+"\n"
+"\n"
+" - Removable media automounting: If you would prefer not to manually\n"
+"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
+"\"umount\", select this option. \n"
+"\n"
+"\n"
+" - Enable Num Lock at startup: If you want Number Lock enabled after\n"
+"booting, select this option (Note: Num Lock will still not work under\n"
+"X)."
+msgstr ""
+"����� �� ������ ������� ���˦ Ҧ��������צ ��æ� ��� ��Ϥ� �������.\n"
+"\n"
+" - ������������� ����ͦ��æ�� ��������� �����: �� ��æ� ����\n"
+"��������� ����˦��� ������ �����, ��� ���� - Ԧ���� ��� ���צ������\n"
+"���������ަ�. �� ������ ������� �צ� ����, ���� ������ �������������\n"
+"��� ����������. ������������ ���, Ԧ���� ���� �� ������ �� �� ������.\n"
+"\n"
+" - ������� Ҧ���� �������: �� ������ ������� Ҧ���� ������� ��� ��Ϥ�\n"
+"�������. �� �������æ�� ����Φ���� �� ��Ҧ�������.\n"
+"\n"
+" - ������ ���ͦ� ���'�Ԧ, ���� ���Ҧ���: � ������ �������� ����� ��\n"
+"� ���ڦ צ��� ��������� ��� ����������� � �����ͦ ���'��� (�� ������\n"
+"��������). ���� �� ��������� � ������ �������, ���֦�� צ���� ��'��\n"
+"���'�Ԧ. ���ͦ����: Ҧ����� � 2-4 �� - �� ��������� Ҧ�.\n"
+"\n"
+" - ����������� ���������� �ͦ���� ��Ӧ��: ���� ��� ����������� ���\n"
+"�ͦ�Φ ��Ӧ� (���� CDROM, ������, ZIP) ����������� ����������� ��ͦ���\n"
+"����, ��� ��� ������ ��������� ������� \"mount\" �� \"umount\", ����Ҧ��\n"
+"��� �����.\n"
+"\n"
+"\n"
+" - ��������� NumLock ��� ����Ԧ: ���� �� ������, ��� ��� NumLock\n"
+"����������� �������� ��� ����Ԧ, ����Ҧ�� ��� ����� (���ͦ����, ��\n"
+"NumLock ��� ���� �� ���� ��������� � X)."
+
+#: ../help.pm_.c:387
+msgid ""
+"Your system is going to reboot.\n"
+"\n"
+"After rebooting, your new Linux Mandrake system will load automatically.\n"
+"If you want to boot into another existing operating system, please read\n"
+"the additional instructions."
+msgstr ""
+"���� ������� ���� ����� �������������.\n"
+"\n"
+"���� ����� ����������� ������������� ���� ���� �������\n"
+"Linux-Mandrake. ���� �� ������ ����������� ���� �������, �������,\n"
+"����-�����, �������צ �������æ�."
+
+#: ../install2.pm_.c:43
+msgid "Choose your language"
+msgstr "����Ҧ�� ����"
+
+#: ../install2.pm_.c:44
+msgid "Select installation class"
+msgstr "����Ҧ�� ��� ���������"
+
+#: ../install2.pm_.c:45
+msgid "Setup SCSI"
+msgstr "����Ҧ�� SCSI"
+
+#: ../install2.pm_.c:46
+msgid "Choose install or upgrade"
+msgstr "��¦� ���������/����������"
+
+#: ../install2.pm_.c:47
+msgid "Configure mouse"
+msgstr "����Ʀ������� ����"
+
+#: ../install2.pm_.c:48
+msgid "Choose your keyboard"
+msgstr "����Ҧ�� ��� ���צ�����"
+
+#: ../install2.pm_.c:49
+msgid "Miscellaneous"
+msgstr "����"
+
+#: ../install2.pm_.c:50
+msgid "Setup filesystems"
+msgstr "��������� ����. ������"
+
+#: ../install2.pm_.c:51
+msgid "Format partitions"
+msgstr "����������� Ц����Ħ��"
+
+#: ../install2.pm_.c:52
+msgid "Choose packages to install"
+msgstr "��¦� ����Ԧ� ��� ���������"
+
+#: ../install2.pm_.c:53
+msgid "Install system"
+msgstr "���������� �������"
+
+#: ../install2.pm_.c:54
+msgid "Configure networking"
+msgstr "�����ϧ�� ������"
+
+#: ../install2.pm_.c:55
+msgid "Cryptographic"
+msgstr "���������Ʀ�"
+
+#: ../install2.pm_.c:56
+msgid "Configure timezone"
+msgstr "���������� ������� ����"
+
+#: ../install2.pm_.c:58
+msgid "Configure printer"
+msgstr "�����ϧ�� �������"
+
+#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:577
+msgid "Set root password"
+msgstr "���������� ������ root'�"
+
+#: ../install2.pm_.c:60
+msgid "Add a user"
+msgstr "������ �����������"
+
+#: ../install2.pm_.c:61
+msgid "Create a bootdisk"
+msgstr "�������� ���Ҧ��� �������"
+
+#: ../install2.pm_.c:62
+msgid "Install bootloader"
+msgstr "���������� ���� ������������"
+
+#: ../install2.pm_.c:63
+msgid "Configure X"
+msgstr "�����ϧ�� X"
+
+#: ../install2.pm_.c:64
+msgid "Exit install"
+msgstr "����� � ���������"
+
+#: ../install2.pm_.c:83
+msgid "beginner"
+msgstr "�����˦���� "
+
+#: ../install2.pm_.c:83
+msgid "developer"
+msgstr "���������"
+
+#: ../install2.pm_.c:83
+msgid "expert"
+msgstr "�������"
+
+#: ../install2.pm_.c:83
+msgid "server"
+msgstr "������"
+
+#: ../install2.pm_.c:311
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"�� �����Φ ���� Ц����Ħ� root.\n"
+"��� ����� ����Ҧ�� ����� Ц����Ħ� (��� ����Φ�� �� ���\n"
+"���������). ���� ����� ����Ҧ�� ``����� ����������'' � ������צ�� ��\n"
+"� `/'"
+
+#: ../install2.pm_.c:327
+msgid "Not enough swap to fulfill installation, please add some"
+msgstr ""
+"�� �������� ����-���'�Ԧ ��� ��˦����� ���������. �¦��ۦ��\n"
+"��. ����-�����."
+
+#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+"�� ���� ��������� ������� Ц����Ħ̦�, ���� ������� ڦ������� ���\n"
+"���� :(\n"
+"� ������� ������ ڦ�����Φ Ц����Ħ��"
+
+#: ../install_any.pm_.c:210
+msgid ""
+"DiskDrake failed to read correctly the partition table.\n"
+"Continue at your own risk!"
+msgstr ""
+"DiskDrake �� ���� צ��� ��������� ������� Ц����Ħ̦�.\n"
+"����������� �� �צ� ������� �����!"
+
+#: ../install_any.pm_.c:220
+msgid "Searching root partition."
+msgstr "����� Ц����Ħ� root..."
+
+#: ../install_any.pm_.c:249
+msgid "Information"
+msgstr "�������æ�"
+
+#: ../install_any.pm_.c:250
+#, c-format
+msgid "%s: This is not a root partition, please select another one."
+msgstr "%s: �� �� root Ц����Ħ�. ����Ҧ�� ����-����� �����."
+
+#: ../install_any.pm_.c:252
+msgid "No root partition found"
+msgstr "�� ���� ������ Ц����Ħ� root"
+
+#: ../install_any.pm_.c:289
+msgid "Can't use broadcast with no NIS domain"
+msgstr "�� ���� ��������������� �������æ� ��� NIS ������"
+
+#: ../install_any.pm_.c:473
+msgid "Error reading file $f"
+msgstr "������� ��� �����Φ ����� $f"
+
+#: ../install_any.pm_.c:479
+#, c-format
+msgid "Bad kickstart file %s (failed %s)"
+msgstr "���������� ��������� ���� %s (������� �� %s)"
+
+#: ../install_steps.pm_.c:72
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"������� �������, ��� � �� ����, �� � ��� ����������.\n"
+"����������� �� �צ� ������� �����."
+
+#: ../install_steps.pm_.c:136
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "���צ�Φ ����� ���������� %s"
+
+#: ../install_steps.pm_.c:295
+#, fuzzy, c-format
+msgid "Welcome to %s"
+msgstr "��������! ������� �������!"
+
+#: ../install_steps.pm_.c:562
+msgid "No floppy drive available"
+msgstr "����� ������� �������"
+
+#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "����������� ���� `%s'\n"
+
+#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:294
+msgid "You must have a swap partition"
+msgstr "�� �����Φ ���� Ц����Ħ� ��� ���� "
+
+#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:296
+msgid ""
+"You don't have a swap partition\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"�� �� ����� Ц����Ħ�� ��� ���Ц���\n"
+"\n"
+"���-���� ������������? "
+
+#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:317
+msgid "Choose the size you want to install"
+msgstr "����Ҧ�� ���ͦ�, �˦ �� ������ ����������"
+
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:361
+msgid "Total size: "
+msgstr "��������� ���ͦ�: "
+
+#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:373
+#: ../standalone/rpmdrake_.c:136
+#, c-format
+msgid "Version: %s\n"
+msgstr "���Ӧ�: %s\n"
+
+#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:374
+#: ../standalone/rpmdrake_.c:137
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "���ͦ�: %d ��\n"
+
+#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:489
+msgid "Choose the packages you want to install"
+msgstr "����Ҧ�� ������, �˦ �� ������ ����������"
+
+#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:492
+msgid "Info"
+msgstr "�������æ�"
+
+#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:500
+#: ../install_steps_interactive.pm_.c:81 ../standalone/rpmdrake_.c:161
+msgid "Install"
+msgstr "���������"
+
+#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:519
+#: ../install_steps_interactive.pm_.c:317
+msgid "Installing"
+msgstr "����������"
+
+#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:526
+msgid "Please wait, "
+msgstr "���������, ����-�����, "
+
+#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:528
+msgid "Time remaining "
+msgstr "������� ���� "
+
+#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:529
+msgid "Total time "
+msgstr "��������� ��� "
+
+#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:534
+#: ../install_steps_interactive.pm_.c:317
+msgid "Preparing installation"
+msgstr "��������� ���������"
+
+#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:549
+#, c-format
+msgid "Installing package %s"
+msgstr "��������� ������ %s"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "Go on anyway?"
+msgstr "���-���� ������������?"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "There was an error ordering packages:"
+msgstr "������� ������� Ц� ��� ���������� ����Ԧ�: "
+
+#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:893
+msgid "Use existing configuration for X11?"
+msgstr "��������������� ��� ������� ���Ʀ����æ� ��� X?"
+
+#: ../install_steps_gtk.pm_.c:259
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX now needs to resize your Windows partition. Be careful: this operation "
+"is\n"
+"dangerous. If you have not already done so, you should first exit the\n"
+"installation, run scandisk under Windows (and optionally run defrag), then\n"
+"restart the installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"����� DrakX ���Ҧ��� �ͦ���� ���ͦ� Ц����Ħ�� �� Windows. ��������:\n"
+"�� �����æ� ����������. ���� �� �� ����� �� �������, ��� ���Ҧ���\n"
+"����� ������������ ��������� scandisk (� �Ҧ� ����, �������, �����\n"
+"��������������� Ц����Ħ� �� ��������� defrag) �� ����� Ц����Ħ̦ ��\n"
+"������� �������� ��� ����� �����.\n"
+"���� ��� �� �������� - ������� ���."
+
+#: ../install_steps_gtk.pm_.c:278
+msgid "Automatic resizing failed"
+msgstr "����������� �ͦ�� ���ͦ�� �� ����������"
+
+#: ../install_steps_gtk.pm_.c:312
+msgid ""
+"Now that you've selected desired groups, please choose \n"
+"how many packages you want, ranging from minimal to full \n"
+"installation of each selected groups."
+msgstr ""
+
+#: ../install_steps_gtk.pm_.c:315
+msgid "You will be able to choose more precisely in next step"
+msgstr "���� ����� ����� ���� ������� �� ���������� ���æ"
+
+#: ../install_steps_gtk.pm_.c:372
+msgid "Bad package"
+msgstr "������ ������ަ"
+
+#: ../install_steps_gtk.pm_.c:522
+msgid "Estimating"
+msgstr "��������� ����������"
+
+#: ../install_steps_gtk.pm_.c:544
+#, c-format
+msgid "%d packages"
+msgstr "%d ������"
+
+#: ../install_steps_gtk.pm_.c:544
+msgid ", %U MB"
+msgstr ", %U ��"
+
+#: ../install_steps_interactive.pm_.c:37
+msgid "An error occurred"
+msgstr "������� �������"
+
+#: ../install_steps_interactive.pm_.c:54
+msgid "Which language do you want?"
+msgstr "��� ���� �� ���������?"
+
+#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
+msgid "Keyboard"
+msgstr "���צ�����"
+
+#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
+msgid "What is your keyboard layout?"
+msgstr "��� � ��� ��������� ���צ�����?"
+
+#: ../install_steps_interactive.pm_.c:79
+msgid "Install/Upgrade"
+msgstr "����������/��������"
+
+#: ../install_steps_interactive.pm_.c:80
+msgid "Is this an install or an upgrade?"
+msgstr "�� ��������� �� ����������?"
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Upgrade"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:89
+msgid "Root Partition"
+msgstr "�����Ħ� root"
+
+#: ../install_steps_interactive.pm_.c:90
+msgid "What is the root partition (/) of your system?"
+msgstr "���� Ц����Ħ� � ��ۦ� �����ͦ � Ц����Ħ��� root (/)?"
+
+#: ../install_steps_interactive.pm_.c:100
+msgid "Recommended"
+msgstr "��������������"
+
+#: ../install_steps_interactive.pm_.c:101
+msgid "Customized"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:102
+msgid "Expert"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:104
+#: ../install_steps_interactive.pm_.c:118
+msgid "Install Class"
+msgstr "���� ���������"
+
+#: ../install_steps_interactive.pm_.c:105
+msgid "What installation class do you want?"
+msgstr "���� ���� ��������� �� ���������?"
+
+#: ../install_steps_interactive.pm_.c:114
+msgid "Normal"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:115
+msgid "Development"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:116
+msgid "Server"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:119
+msgid "What usage do you want?"
+msgstr "��� ������������ �� ���������?"
+
+#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
+msgid "What is the type of your mouse?"
+msgstr "���� ��� ��ۦ �� �����?"
+
+#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
+msgid "Mouse Port"
+msgstr "���� ��ۦ"
+
+#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
+msgid "Which serial port is your mouse connected to?"
+msgstr "�� ����� ���̦������� ����� ��ɤ����� ����?"
+
+#: ../install_steps_interactive.pm_.c:157
+msgid "no available partitions"
+msgstr "����� Ц����Ħ̦�"
+
+#: ../install_steps_interactive.pm_.c:159
+#, c-format
+msgid "(%dMb)"
+msgstr "(%d��)"
+
+#: ../install_steps_interactive.pm_.c:166
+msgid "Which partition do you want to use as your root partition"
+msgstr "���� Ц����Ħ� �� ������ ������� Ц����Ħ��� root � ��ۦ� �����ͦ?"
+
+#: ../install_steps_interactive.pm_.c:173
+msgid "Choose the mount points"
+msgstr "����Ҧ�� ����� ����������"
+
+#: ../install_steps_interactive.pm_.c:185
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"��� ����, ��� ������� Ц����Ħ̦� ���� ����צ������, ��� �����\n"
+"������������� �������"
+
+#: ../install_steps_interactive.pm_.c:207
+msgid "Choose the partitions you want to format"
+msgstr "����Ҧ�� Ц����Ħ��, �˦ �� ������ צ������������"
+
+#: ../install_steps_interactive.pm_.c:211
+msgid "Check bad blocks?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:230
+msgid "Looking for available packages"
+msgstr "����� ����Φ ������"
+
+#: ../install_steps_interactive.pm_.c:236
+msgid "Finding packages to upgrade"
+msgstr "����� ������ ��� ����������"
+
+#: ../install_steps_interactive.pm_.c:266
+#, c-format
+msgid ""
+"You need %dMB for a full install of the groups you selected.\n"
+"You can go on anyway, but be warned that you won't get all packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:290
+msgid "Package Group Selection"
+msgstr "��¦� ���� ����Ԧ�"
+
+#: ../install_steps_interactive.pm_.c:326
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"���������� ����� %s\n"
+"%d%%"
+
+#: ../install_steps_interactive.pm_.c:335
+msgid "Post install configuration"
+msgstr "���Ʀ����æ� Ц��� ���������"
+
+#: ../install_steps_interactive.pm_.c:346
+msgid "Keep the current IP configuration"
+msgstr "��������������� ������� ���Ʀ����æ� IP"
+
+#: ../install_steps_interactive.pm_.c:347
+msgid "Reconfigure network now"
+msgstr "�������� ���� ���Ʀ����æ� ����֦"
+
+#: ../install_steps_interactive.pm_.c:348
+#: ../install_steps_interactive.pm_.c:360
+msgid "Do not set up networking"
+msgstr "�� ������������� ������"
+
+#: ../install_steps_interactive.pm_.c:350
+#: ../install_steps_interactive.pm_.c:358
+msgid "Network Configuration"
+msgstr "���Ʀ����æ� ����֦"
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Local networking has already been configured. Do you want to:"
+msgstr "�������� ������ ��� �����������. �� �� ������:"
+
+#: ../install_steps_interactive.pm_.c:359
+msgid "Do you want to configure networking for your system?"
+msgstr "�� �� ������ �����ϧ�� ������ �������?"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Dialup with modem"
+msgstr "��'���� ����� �����"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Local LAN"
+msgstr "�������� ������"
+
+#: ../install_steps_interactive.pm_.c:369
+msgid "no network card found"
+msgstr "�� �������� ����� ����֦"
+
+#: ../install_steps_interactive.pm_.c:399
+#: ../install_steps_interactive.pm_.c:400
+#, c-format
+msgid "Configuring network device %s"
+msgstr "���Ʀ����� �����Ҧ� ����֦ %s"
+
+#: ../install_steps_interactive.pm_.c:401
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"���Ħ��, ����-�����, ���Ʀ����æ� IP ��� æ�� ������. ����� �����\n"
+"����� ������� �� IP ������ � �������-�������צ� ����æ� (��,\n"
+"���������, 1.2.3.4)"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Automatic IP"
+msgstr "����������� ���Ʀ����æ� IP"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "IP address:"
+msgstr "IP ������:"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Netmask:"
+msgstr "����� ����֦:"
+
+#: ../install_steps_interactive.pm_.c:405
+msgid "(bootp/dhcp)"
+msgstr "(bootp/dhcp)"
+
+#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP ������ ��� ���� � �����Ԧ 1.2.3.4"
+
+#: ../install_steps_interactive.pm_.c:429
+msgid "Configuring network"
+msgstr "���Ʀ����� ������"
+
+#: ../install_steps_interactive.pm_.c:430
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one"
+msgstr ""
+"���Ħ��, ����-�����, ����� ������ �����. ����� ����� ������� ����\n"
+"���Φ��� ���̦Ʀ������� ������ �����, �����, ��, ���������,\n"
+"``mybox.mylab.myco.com''.\n"
+"�� ����� ������ ������ IP ������ ����� ���� �� ����� �����."
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "DNS server:"
+msgstr "������ DNS:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway device:"
+msgstr "�������� �����Ҧ�:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway:"
+msgstr "����:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Host name:"
+msgstr "��'� �����:"
+
+#: ../install_steps_interactive.pm_.c:447
+msgid "Try to find a modem?"
+msgstr "���������� צ������� �����?"
+
+#: ../install_steps_interactive.pm_.c:457
+msgid "Which serial port is your modem connected to?"
+msgstr "�� ����� ���̦������� ����� Ц��������� ��� �����?"
+
+#: ../install_steps_interactive.pm_.c:462
+msgid "Dialup options"
+msgstr "��������� ��'���� �� ������"
+
+#: ../install_steps_interactive.pm_.c:463
+msgid "Connection name"
+msgstr "����� ��'����"
+
+#: ../install_steps_interactive.pm_.c:464
+msgid "Phone number"
+msgstr "����� ��������"
+
+#: ../install_steps_interactive.pm_.c:465
+msgid "Login ID"
+msgstr "ID �����������"
+
+#: ../install_steps_interactive.pm_.c:466
+#: ../install_steps_interactive.pm_.c:578
+#: ../install_steps_interactive.pm_.c:624
+#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
+msgid "Password"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Authentication"
+msgstr "���������æ�"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "PAP"
+msgstr "PAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Script-based"
+msgstr "�� ��������� �������"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Terminal-based"
+msgstr "����� ���ͦ���"
+
+#: ../install_steps_interactive.pm_.c:468
+msgid "Domain name"
+msgstr "����� ������"
+
+#: ../install_steps_interactive.pm_.c:469
+msgid "First DNS Server"
+msgstr "������ ������ DNS"
+
+#: ../install_steps_interactive.pm_.c:470
+msgid "Second DNS Server"
+msgstr "������ ������ DNS"
+
+#: ../install_steps_interactive.pm_.c:483
+msgid "Bringing up the network"
+msgstr "������ ������"
+
+#: ../install_steps_interactive.pm_.c:492
+#, fuzzy
+msgid ""
+"You have now the possibility to download software aimed for encryption.\n"
+"\n"
+"WARNING:\n"
+"\n"
+"Due to different general requirements applicable to these software and "
+"imposed\n"
+"by various jurisdictions, customer and/or end user of theses software "
+"should\n"
+"ensure that the laws of his/their jurisdiction allow him/them to download, "
+"stock\n"
+"and/or use these software.\n"
+"\n"
+"In addition customer and/or end user shall particularly be aware to not "
+"infringe\n"
+"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
+"respect the provision of these applicable laws, he/they will incur serious\n"
+"sanctions.\n"
+"\n"
+"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
+"liable\n"
+"for special, indirect or incidental damages whatsoever (including, but not\n"
+"limited to loss of profits, business interruption, loss of commercial data "
+"and\n"
+"other pecuniary losses, and eventual liabilities and indemnification to be "
+"paid\n"
+"pursuant to a court decision) arising out of use, possession, or the sole\n"
+"downloading of these software, to which customer and/or end user could\n"
+"eventually have access after having sign up the present agreement.\n"
+"\n"
+"\n"
+"For any queries relating to these agreement, please contact \n"
+"Mandrakesoft, Inc.\n"
+"2400 N. Lincoln Avenue Suite 243\n"
+"Altadena California 91001\n"
+"USA"
+msgstr ""
+"�� ����� �����צ��� ����� ���������� ���������Ʀ��� ��������� ������������.\n"
+"\n"
+"�����!\n"
+"\n"
+"����� צ�ͦ����Ԧ � ��������� ���������æ�� �� ������ ���� �����������\n"
+"������������, �� �������� צ� צ�ͦ������� � �������æ��, ����������\n"
+"��/��� ˦������ ���������� ����� ����������� �������� �����\n"
+"�����צ�������, �� ������������� ��/���� �������æ� ���������� ��/����\n"
+"�������������, ���Ҧ���� �� ��������������� ���� ���������\n"
+"������������.\n"
+"\n"
+"��������� ���������� ��/��� ˦������ ���������� �������� �����\n"
+"�������� ����� �� ��, ��� �� ���������� ������������� ��Ϥ�\n"
+"�������æ�. � ��ڦ ��������� צ���צ����� ������������� ���� ������\n"
+"������� �������� ���ͦ������ צ���צ����Φ��� �� ��.\n"
+"\n"
+"� ������� ������� Φ Mandrakesoft, Φ ���� ���������, Φ �������������\n"
+"�� ������ ����� ����ϧ צ���צ�������Ԧ Φ �� �˦ ������צ, �����ͦ ��\n"
+"�������צ ������ (���������, ��� �� ����������� �������� ��������,\n"
+"���������� � ¦���Ӧ, �������� �����æ���� ����� �� ������ ��������, �\n"
+"����� ��������� �� ������� �������), �� ��������� צ� ������������,\n"
+"����Ħ��� ��� צ� ����������� ����� ����������� �����������, �� �����\n"
+"���������� ��� ������ ��� �������� ������ ��������.\n"
+"\n"
+"�Ӧ ��������� ���� ����� �������� ����� ������������ �� �������:\n"
+"Mandrakesoft, Inc.\n"
+"2400 N. Lincoln Avenue Suite 243\n"
+"Altadena California 91001\n"
+"USA"
+
+#: ../install_steps_interactive.pm_.c:523
+msgid "Choose a mirror from which to get the packages"
+msgstr "����Ҧ�� ������, � ����� ���������� ������"
+
+#: ../install_steps_interactive.pm_.c:528
+msgid "Contacting the mirror to get the list of available packages"
+msgstr "��'������ � �������� ��� ��������� ������ ������� ����Ԧ�"
+
+#: ../install_steps_interactive.pm_.c:532
+msgid "Which packages do you want to install"
+msgstr "�˦ ������ �� ������ ����������?"
+
+#: ../install_steps_interactive.pm_.c:534
+msgid "Downloading cryptographic packages"
+msgstr "��������� ������ ���������Ʀ�"
+
+#: ../install_steps_interactive.pm_.c:544
+msgid "Which is your timezone?"
+msgstr "� ����� �������� ���Ӧ �� �����������?"
+
+#: ../install_steps_interactive.pm_.c:545
+msgid "Is your hardware clock set to GMT?"
+msgstr "�� ��� �������� ������������ �� GMT (��� �� �Ҧ�צ��)?"
+
+#: ../install_steps_interactive.pm_.c:555
+msgid "Printer"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:556
+msgid "Would you like to configure a printer?"
+msgstr "�� ����� ��� �����ϧ�� �������?"
+
+#: ../install_steps_interactive.pm_.c:576
+msgid "No password"
+msgstr "��� ������"
+
+#: ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
+#: ../my_gtk.pm_.c:525
+msgid "Ok"
+msgstr "���"
+
+#: ../install_steps_interactive.pm_.c:579
+#: ../install_steps_interactive.pm_.c:625
+#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
+msgid "Password (again)"
+msgstr "������ (�� ���)"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "Use shadow file"
+msgstr "��������������� Ԧ���צ ����̦"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "shadow"
+msgstr "Ԧ���צ"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "MD5"
+msgstr "MD5"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "Use MD5 passwords"
+msgstr "��������������� MD5 ����̦"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "Use NIS"
+msgstr "������������� NIS"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "yellow pages"
+msgstr "���Ԧ ���Ҧ���"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "Please try again"
+msgstr "����-�����, ��������� �� ���"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "The passwords do not match"
+msgstr "����̦ Ҧ�Φ"
+
+#: ../install_steps_interactive.pm_.c:590
+#, c-format
+msgid "This password is too simple (must be at least %d characters long)"
+msgstr ""
+"��� ������ ������� ������� (צ� ������� ���� ���� � %d ̦��� ���������)"
+
+#: ../install_steps_interactive.pm_.c:597
+msgid "Authentification NIS"
+msgstr "NIS ���������æ�"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Domain"
+msgstr "����� NIS"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Server"
+msgstr "������ NIS"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Accept user"
+msgstr "�������� �����������"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Add user"
+msgstr "������ �����������"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid "(already added %s)"
+msgstr "(��� ��������� %s)"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"���Ħ�� �����������\n"
+"%s"
+
+#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
+msgid "Real name"
+msgstr "����� ��'�"
+
+#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
+msgid "User name"
+msgstr "��'� �����������"
+
+#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
+msgid "Shell"
+msgstr "�������� ��������"
+
+#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
+msgid "This password is too simple"
+msgstr "������ ������� �������"
+
+#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
+msgid "Please give a user name"
+msgstr "�����, ����-�����, ��'� �����������"
+
+#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"��'� ����������� ������� ���������� Ԧ���� � ����� ���������� ̦���,\n"
+"�����, `-' �� `_'"
+
+#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
+msgid "This user name is already added"
+msgstr "�� ��'� ��� �������"
+
+#: ../install_steps_interactive.pm_.c:659
+msgid "First drive"
+msgstr "������ ����"
+
+#: ../install_steps_interactive.pm_.c:660
+msgid "Second drive"
+msgstr "������ ����"
+
+#: ../install_steps_interactive.pm_.c:661
+msgid "Skip"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:666
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO on your system, or another operating system removes LILO, or LILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?"
+msgstr ""
+"���Ҧ���� ���� ����������� ��� �����צ��� ������� ������� ���������\n"
+"צ� ���������� �������������. �� ���� ����������� � ��� ��������, ����\n"
+"�� �� ������� ������������� LILO � ��ϧ� �����ͦ, ��� ���� ����\n"
+"������� ������� \"���������\" LILO, ��� ���� LILO �� ������ � �����\n"
+"���Ʀ����æ�� ��������� ����¦�. ���Ҧ���� ���� ���� �����\n"
+"����������������� ����� � Mandrake ���Ҧ���� ������, �� ������\n"
+"צ��������� צ� ��������� ��������� ���Ȧ� �������� ����Ԧ���. ��\n"
+"������� �� �������� ���Ҧ���� ���� ��� ��Ϥ� �������?"
+
+#: ../install_steps_interactive.pm_.c:675
+msgid "Sorry, no floppy drive available"
+msgstr "����������, ����� ������� �������"
+
+#: ../install_steps_interactive.pm_.c:678
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr ""
+"����Ҧ�� ���צ� �������, ���� �� ������ ��������������� ��� ���������\n"
+"���Ҧ��ϧ �������"
+
+#: ../install_steps_interactive.pm_.c:683
+#, c-format
+msgid "Insert a floppy in drive %s"
+msgstr "������� ������� � �����צ� %s"
+
+#: ../install_steps_interactive.pm_.c:684
+#: ../install_steps_interactive.pm_.c:1042
+msgid "Creating bootdisk"
+msgstr "������� ������� ��� ������������"
+
+#: ../install_steps_interactive.pm_.c:691
+msgid "Preparing bootloader"
+msgstr "���������� ���������������� ����"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of boot partition"
+msgstr "������ ������ ���������� Ц����Ħ�� (boot partition)"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of drive (MBR)"
+msgstr "������ ������ ����� (MBR)"
+
+#: ../install_steps_interactive.pm_.c:708
+msgid "LILO Installation"
+msgstr "��������� LILO"
+
+#: ../install_steps_interactive.pm_.c:709
+msgid "Where do you want to install the bootloader?"
+msgstr "�� �� ������ ���������� ��������� ����?"
+
+#: ../install_steps_interactive.pm_.c:715
+msgid "Do you want to use LILO?"
+msgstr "�� �� ������ ��������������� LILO?"
+
+#: ../install_steps_interactive.pm_.c:718
+msgid "Boot device"
+msgstr "�����Ҧ� ������������"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "Linear (needed for some SCSI drives)"
+msgstr "�Φ���� (���Ҧ��� ��� ������ SCSI ���˦�)"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "linear"
+msgstr "̦Φ����"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "Compact"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "compact"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:721
+msgid "Delay before booting default image"
+msgstr "����� ����� ������������� ������ϧ �������"
+
+#: ../install_steps_interactive.pm_.c:722
+msgid "Video mode"
+msgstr "����� �����"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "Restrict command line options"
+msgstr "�������� ��æ� ���������� �����"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "restrict"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:732
+msgid "LILO main options"
+msgstr "�����Φ ��æ� LILO"
+
+#: ../install_steps_interactive.pm_.c:735
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "��æ� ``�������� ��æ� ���������� �����'' �� ��� ����� ��� ������"
+
+#: ../install_steps_interactive.pm_.c:746
+msgid ""
+"Here are the following entries in LILO.\n"
+"You can add some more or change the existing ones."
+msgstr ""
+"��� ������Φ ��˦ ��æ� ��� LILO.\n"
+"�� ������ ��� ������ �� ���˦, ��� �ͦ���� Ԧ, �� ��� �������."
+
+#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
+msgid "Add"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Linux"
+msgstr "�����"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Other OS (windows...)"
+msgstr "��ۦ ������� (windows...)"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Which type of entry do you want to add"
+msgstr "���� ��� �� ������ ������?"
+
+#: ../install_steps_interactive.pm_.c:777
+msgid "Image"
+msgstr "�����"
+
+#: ../install_steps_interactive.pm_.c:778
+#: ../install_steps_interactive.pm_.c:786
+msgid "Root"
+msgstr "Root"
+
+#: ../install_steps_interactive.pm_.c:779
+msgid "Append"
+msgstr "��ɤ�����"
+
+#: ../install_steps_interactive.pm_.c:780
+msgid "Initrd"
+msgstr "Initrd"
+
+#: ../install_steps_interactive.pm_.c:781
+msgid "Read-write"
+msgstr "�����/�������"
+
+#: ../install_steps_interactive.pm_.c:787
+msgid "Table"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:788
+msgid "Unsafe"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:793
+msgid "Label"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:795
+msgid "Default"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:798
+msgid "Remove entry"
+msgstr "������ �����"
+
+#: ../install_steps_interactive.pm_.c:801
+msgid "Empty label not allowed"
+msgstr "�� ������������ ���Ԧ ��������"
+
+#: ../install_steps_interactive.pm_.c:802
+msgid "This label is already in use"
+msgstr "�� �������� ��� ����������դ����"
+
+#: ../install_steps_interactive.pm_.c:803
+#, c-format
+msgid "A entry %s already exists"
+msgstr "����� %s ��� ���դ"
+
+#: ../install_steps_interactive.pm_.c:817
+msgid "Installation of LILO failed. The following error occured:"
+msgstr "��������� LILO �������. ������� �������:"
+
+#: ../install_steps_interactive.pm_.c:831
+msgid "Proxies configuration"
+msgstr "���Ʀ����æ� ����Ӧ"
+
+#: ../install_steps_interactive.pm_.c:832
+msgid "HTTP proxy"
+msgstr "����Ӧ HTTP"
+
+#: ../install_steps_interactive.pm_.c:833
+msgid "FTP proxy"
+msgstr "����Ӧ FTP"
+
+#: ../install_steps_interactive.pm_.c:839
+msgid "Proxy should be http://..."
+msgstr "������ ����Ӧ ��� ���� http://..."
+
+#: ../install_steps_interactive.pm_.c:840
+msgid "Proxy should be ftp://..."
+msgstr "������ ����Ӧ ��� ���� ftp://..."
+
+#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
+msgid "Welcome To Crackers"
+msgstr "��������! ������� �������!"
+
+#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
+msgid "Poor"
+msgstr "���� �������"
+
+#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
+msgid "Low"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
+msgid "Medium"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
+msgid "High"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
+msgid "Paranoid"
+msgstr "�����Ϧ�������"
+
+#: ../install_steps_interactive.pm_.c:868
+msgid "Miscellaneous questions"
+msgstr "��Φ ���������"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "(may cause data corruption)"
+msgstr "(���� ������� ������ �����)"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "Use hard drive optimisations?"
+msgstr "������������� ����ͦ��æ�� �����?"
+
+#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
+msgid "Choose security level"
+msgstr "����Ҧ�� Ҧ���� �������"
+
+#: ../install_steps_interactive.pm_.c:871
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "������ ��'�� ���'�Ԧ (RAM). �������� %d ��"
+
+#: ../install_steps_interactive.pm_.c:872
+msgid "Removable media automounting"
+msgstr "���������� �ͦ���� ���˦�"
+
+#: ../install_steps_interactive.pm_.c:874
+msgid "Enable num lock at startup"
+msgstr "��������� numlock ��� ����Ԧ"
+
+#: ../install_steps_interactive.pm_.c:877
+msgid "Give the ram size in Mb"
+msgstr "������ ���ͦ� ���'�Ԧ � ��"
+
+#: ../install_steps_interactive.pm_.c:905
+#: ../install_steps_interactive.pm_.c:1075
+msgid "Try to find PCI devices?"
+msgstr "���������� צ������� PCi ������ϧ?"
+
+#: ../install_steps_interactive.pm_.c:920
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"���˦ ����� �� �������Φ.\n"
+"\n"
+"�� Ħ���� ������ ��������� �����?"
+
+#: ../install_steps_interactive.pm_.c:927
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"For information on fixes which are available for this release of "
+"Linux-Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux-Mandrake User's Guide."
+msgstr ""
+"�������, ��������� ��˦�����. ���ͦ�� � �������Ħ� �������������Φ\n"
+"��Ӧ� � ��Ԧ� �����Φ�� Return ��� �������������� �������.\n"
+"\n"
+"��� �������æ� ��� ��������Φ ������� ������Φ � ��� ���Ӧ�\n"
+"Linux-Mandrake ����Φ���� �� ���Ħ�� Errata �� �����Ҧ\n"
+"http://www.linux-mandrake.com/. \n"
+"\n"
+"��צ��� ��� ���Ʀ����æ� ���ϧ ������� �������Φ � ����-�������������\n"
+"���Ħ̦ �Ʀæ����� ��Ҧ������� ����������� Linux-Mandrake."
+
+#: ../install_steps_interactive.pm_.c:936
+msgid "Shutting down"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:950
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr "���������� ������� ��� %s ����� %s"
+
+#: ../install_steps_interactive.pm_.c:951
+#, c-format
+msgid "(module %s)"
+msgstr "(������ %s)"
+
+#: ../install_steps_interactive.pm_.c:961
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "���� ������� %s ��Φ ����������?"
+
+#: ../install_steps_interactive.pm_.c:969
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+"� ������ �������� ������� %s ������� ��������ϧ �������æ� ��� ����,\n"
+"��� צ��� ���������, ���� �������� ������ ��������� ��� �ŧ. �� ��\n"
+"��Ԧ�� � �� ������� �������צ ��æ� ��� ����� �� ��������� ��������\n"
+"����������� ���� �������, ��� ������ ���Ҧ��� �������æ�? ������ ����\n"
+"�������������� ���� �������� �� ��������� ����'�����, ��� �� �������\n"
+"�� ��������� ����."
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Autoprobe"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Specify options"
+msgstr "���֦�� ��æ�"
+
+#: ../install_steps_interactive.pm_.c:978
+#, c-format
+msgid "You may now provide its options to module %s."
+msgstr "����� �� ������ ������ ���� ��æ� ��� ������ %s."
+
+#: ../install_steps_interactive.pm_.c:984
+#, c-format
+msgid ""
+"You may now provide its options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"�� ������ ����� ��������������� ���� ��æ� � ����̦ %s.\n"
+"��æ� ����� ������ ``�����=�������� �����2=��������2 ...''.\n"
+"���������, ``io=0x300 irq=7''"
+
+#: ../install_steps_interactive.pm_.c:987
+msgid "Module options:"
+msgstr "��æ� ������:"
+
+#: ../install_steps_interactive.pm_.c:997
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"������������ ������ %s �������.\n"
+"������ ���������� ��ۦ ���������?"
+
+#: ../install_steps_interactive.pm_.c:1010
+msgid "Try to find PCMCIA cards?"
+msgstr "���������� צ������� PCMCIA ������?"
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "Configuring PCMCIA cards..."
+msgstr "���Ʀ����� ������ PCMCIA..."
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../install_steps_interactive.pm_.c:1018
+msgid ""
+"Linux does not yet fully support ultra dma 66 HPT.\n"
+"As a work-around i can make a custom floppy giving access the hard drive on "
+"ide2 and ide3"
+msgstr ""
+"����� �� �� ���Φ��� Ц�����դ ultra dma 66 HPT.\n"
+"�� ��������� Ҧ����� � ���� �������� ���æ����� �������, ��\n"
+"����������� ������ �� IDE ���˦� �� ide2 �� ide3"
+
+#: ../install_steps_interactive.pm_.c:1039
+msgid ""
+"Enter a floppy to create an HTP enabled boot\n"
+"(all data on floppy will be lost)"
+msgstr ""
+"������� ������� ��� ��������� ������� ��� ������������ � HTP\n"
+"�Ӧ ��Φ �� æ� �����Ԧ ������ ������Φ"
+
+#: ../install_steps_interactive.pm_.c:1056
+msgid "It is necessary to restart installation booting on the floppy"
+msgstr "������ ��������� ����Ȧ��� ������������� �������������� � �������"
+
+#: ../install_steps_interactive.pm_.c:1057
+msgid "It is necessary to restart installation with the new parameters"
+msgstr "���Ҧ��� ������������� ��������� � ������ �����������"
+
+#: ../install_steps_interactive.pm_.c:1061
+#, c-format
+msgid ""
+"Failed to create an HTP boot floppy.\n"
+"You may have to restart installation and give ``%s'' at the prompt"
+msgstr ""
+"�� ���� �������� �������� ������� HPT.\n"
+"�� ������ ���������� ������������� ��������� � ������ �������� ``%s''"
+
+#: ../install_steps_interactive.pm_.c:1081
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr "������Φ ���������� %s %s"
+
+#: ../install_steps_interactive.pm_.c:1082
+msgid "Do you have another one?"
+msgstr "�� �� ����� ��ۦ?"
+
+#: ../install_steps_interactive.pm_.c:1083
+#, c-format
+msgid "Do you have any %s interface?"
+msgstr "�� �� ����� ����-�˦ %s ����������?"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
+msgid "No"
+msgstr "�"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424
+msgid "Yes"
+msgstr "���"
+
+#: ../install_steps_interactive.pm_.c:1086
+msgid "See hardware info"
+msgstr "����������� �������æ� ��� �������� ������������"
+
+#: ../install_steps_newt.pm_.c:19
+#, c-format
+msgid "Linux-Mandrake Installation %s"
+msgstr "��������� Linux-Mandrake %s"
+
+#: ../install_steps_newt.pm_.c:30
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr ""
+" <Tab>/<Alt-Tab> ͦ� ���������� | <Space> ��¦� | <F12> ��������� �����"
+
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
+msgid "Cancel"
+msgstr "���ͦ����"
+
+#: ../interactive.pm_.c:181
+msgid "Please wait"
+msgstr "���������, ����-�����"
+
+#: ../interactive_stdio.pm_.c:35
+#, c-format
+msgid "Ambiguity (%s), be more precise\n"
+msgstr "����������Φ��� (%s). ���֦��, ����-�����, ���Φ��\n"
+
+#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
+#: ../interactive_stdio.pm_.c:70
+msgid "Bad choice, try again\n"
+msgstr "�������� ��¦�, ��������� �� ���\n"
+
+#: ../interactive_stdio.pm_.c:39
+#, c-format
+msgid " ? (default %s) "
+msgstr " ? (�������������� %s) "
+
+#: ../interactive_stdio.pm_.c:52
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "��� ��¦�? (�������������� %s) "
+
+#: ../interactive_stdio.pm_.c:71
+#, c-format
+msgid "Your choice? (default %s enter `none' for none) "
+msgstr "��� ��¦�? (�������������� %s, ���Ħ�� `none' ��� Φ�����) "
+
+#: ../keyboard.pm_.c:88
+msgid "Armenian"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:89
+msgid "Belgian"
+msgstr "����Ǧ�����"
+
+#: ../keyboard.pm_.c:90
+msgid "Bulgarian"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:91
+msgid "Brazilian"
+msgstr "���ڦ̦�����"
+
+#: ../keyboard.pm_.c:92
+msgid "Swiss (French layout)"
+msgstr "����������� (���������� ���������)"
+
+#: ../keyboard.pm_.c:93
+msgid "Swiss (German layout)"
+msgstr "����������� (������ ���������)"
+
+#: ../keyboard.pm_.c:94
+msgid "Czech"
+msgstr "������"
+
+#: ../keyboard.pm_.c:95
+msgid "German"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:96
+msgid "Danish"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:97
+msgid "Dvorak"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:98
+msgid "Estonian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:99
+msgid "Spanish"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:100
+msgid "Finnish"
+msgstr "������"
+
+#: ../keyboard.pm_.c:101
+msgid "French"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:102
+msgid "Georgian (\"Russian\" layout)"
+msgstr "���������� (��Ӧ����� ���������)"
+
+#: ../keyboard.pm_.c:103
+msgid "Georgian (\"Latin\" layout)"
+msgstr "���������� (��������� ���������)"
+
+#: ../keyboard.pm_.c:104
+msgid "Greek"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:105
+msgid "Hungarian"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:106
+msgid "Israeli"
+msgstr "�����������"
+
+#: ../keyboard.pm_.c:107
+msgid "Israeli (Phonetic)"
+msgstr "����������� (���������)"
+
+#: ../keyboard.pm_.c:108
+msgid "Icelandic"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:109
+msgid "Italian"
+msgstr "���̦�����"
+
+#: ../keyboard.pm_.c:110
+msgid "Latin American"
+msgstr "������-������������"
+
+#: ../keyboard.pm_.c:111
+msgid "Dutch"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:112
+msgid "Lithuanian AZERTY"
+msgstr "��������� AZERTY"
+
+#: ../keyboard.pm_.c:113
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "��������� \"�������� ���\" QWERTY"
+
+#: ../keyboard.pm_.c:114
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "��������� \"���������\" QWERTY"
+
+#: ../keyboard.pm_.c:115
+msgid "Norwegian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:116
+#, fuzzy
+msgid "Polish (qwerty layout)"
+msgstr "����������� (������ ���������)"
+
+#: ../keyboard.pm_.c:117
+#, fuzzy
+msgid "Polish (qwertz layout)"
+msgstr "����������� (������ ���������)"
+
+#: ../keyboard.pm_.c:118
+msgid "Portuguese"
+msgstr "�������������"
+
+#: ../keyboard.pm_.c:119
+msgid "Canadian (Quebec)"
+msgstr "��������� (������)"
+
+#: ../keyboard.pm_.c:120
+msgid "Russian"
+msgstr "��Ӧ�����"
+
+#: ../keyboard.pm_.c:121
+msgid "Russian (Yawerty)"
+msgstr "��Ӧ����� (������)"
+
+#: ../keyboard.pm_.c:122
+msgid "Swedish"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:123
+msgid "Slovenian"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:124
+msgid "Slovakian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:125
+msgid "Thai keyboard"
+msgstr "������� ���צ�����"
+
+#: ../keyboard.pm_.c:126
+msgid "Turkish (traditional \"F\" model)"
+msgstr "�������� (������� \"F\" ������)"
+
+#: ../keyboard.pm_.c:127
+msgid "Turkish (modern \"Q\" model)"
+msgstr "�������� (������� \"Q\" ������)"
+
+#: ../keyboard.pm_.c:128
+msgid "Ukrainian"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:129
+msgid "UK keyboard"
+msgstr "���������� ���צ�����"
+
+#: ../keyboard.pm_.c:130
+msgid "US keyboard"
+msgstr "���צ����� ���"
+
+#: ../keyboard.pm_.c:131
+msgid "US keyboard (international)"
+msgstr "���צ����� ��� (ͦ��������)"
+
+#: ../keyboard.pm_.c:132
+msgid "Yugoslavian (latin layout)"
+msgstr "����������� (��������� ���������)"
+
+# NOTE: this message will be displayed by lilo at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is then suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# When possible cp437 accentuated letters can be used too.
+#
+#: ../lilo.pm_.c:145
+#, c-format
+msgid ""
+"Welcome to LILO the operating system chooser!\n"
+"\n"
+"To list the possible choices, press <TAB>.\n"
+"\n"
+"To load one of them, write its name and press <ENTER> or wait %d seconds for "
+"default boot.\n"
+"\n"
+msgstr ""
+"Laskavo prosimo do LILO - peremikach operaciijnih sistem!\n"
+"\n"
+"Schob perechisliti mozhlivii sistemi natisniit' <TAB>.\n"
+"\n"
+"Schob startuvati odnu z nih, nadrukujte yiyi nazvu ii natisniit' <ENTER>\n"
+"abo pochekajte %d sekund poki pochne vantazhitisya persha z nih.\n"
+"\n"
+
+#: ../mouse.pm_.c:20
+msgid "No Mouse"
+msgstr "��� �����"
+
+#: ../mouse.pm_.c:21
+msgid "Microsoft Rev 2.1A or higher (serial)"
+msgstr "Microsoft Rev 2.1A �� ���� (serial)"
+
+#: ../mouse.pm_.c:22
+msgid "Logitech CC Series (serial)"
+msgstr "Logitech CC Series (serial)"
+
+#: ../mouse.pm_.c:23
+msgid "Logitech MouseMan+/FirstMouse+ (serial)"
+msgstr "Logitech MouseMan+/FirstMouse+ (serial)"
+
+#: ../mouse.pm_.c:24
+msgid "ASCII MieMouse (serial)"
+msgstr "ASCII MieMouse (serial)"
+
+#: ../mouse.pm_.c:25
+msgid "Genius NetMouse (serial)"
+msgstr "Genius NetMouse (serial)"
+
+#: ../mouse.pm_.c:26
+msgid "Microsoft IntelliMouse (serial)"
+msgstr "Microsoft IntelliMouse (serial)"
+
+#: ../mouse.pm_.c:27
+msgid "MM Series (serial)"
+msgstr "MM Series (serial)"
+
+#: ../mouse.pm_.c:28
+msgid "MM HitTablet (serial)"
+msgstr "MM HitTablet (serial)"
+
+#: ../mouse.pm_.c:29
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serial, ��� C7)"
+
+#: ../mouse.pm_.c:30
+msgid "Logitech MouseMan/FirstMouse (serial)"
+msgstr "Logitech MouseMan/FirstMouse (serial)"
+
+#: ../mouse.pm_.c:31
+msgid "Generic Mouse (serial)"
+msgstr "Generic Mouse (serial)"
+
+#: ../mouse.pm_.c:32
+msgid "Microsoft compatible (serial)"
+msgstr "Microsoft-��ͦ��� (serial)"
+
+#: ../mouse.pm_.c:33
+msgid "Generic 3 Button Mouse (serial)"
+msgstr "Generic 3 Button Mouse (serial)"
+
+#: ../mouse.pm_.c:34
+msgid "Mouse Systems (serial)"
+msgstr "Mouse Systems (serial)"
+
+#: ../mouse.pm_.c:35
+msgid "Generic Mouse (PS/2)"
+msgstr "Generic Mouse (PS/2)"
+
+#: ../mouse.pm_.c:36
+msgid "Logitech MouseMan/FirstMouse (ps/2)"
+msgstr "Logitech MouseMan/FirstMouse (ps/2)"
+
+#: ../mouse.pm_.c:37
+msgid "Generic 3 Button Mouse (PS/2)"
+msgstr "Generic 3 Button Mouse (PS/2)"
+
+#: ../mouse.pm_.c:38
+msgid "ALPS GlidePoint (PS/2)"
+msgstr "ALPS GlidePoint (PS/2)"
+
+#: ../mouse.pm_.c:39
+msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
+msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)"
+
+#: ../mouse.pm_.c:40
+msgid "Kensington Thinking Mouse (PS/2)"
+msgstr "Kensington Thinking Mouse (PS/2)"
+
+#: ../mouse.pm_.c:41
+msgid "ASCII MieMouse (PS/2)"
+msgstr "ASCII MieMouse (PS/2)"
+
+#: ../mouse.pm_.c:42
+msgid "Genius NetMouse (PS/2)"
+msgstr "Genius NetMouse (PS/2)"
+
+#: ../mouse.pm_.c:43
+msgid "Genius NetMouse Pro (PS/2)"
+msgstr "Genius NetMouse Pro (PS/2)"
+
+#: ../mouse.pm_.c:44
+msgid "Genius NetScroll (PS/2)"
+msgstr "Genius NetScroll (PS/2)"
+
+#: ../mouse.pm_.c:45
+msgid "Microsoft IntelliMouse (PS/2)"
+msgstr "Microsoft IntelliMouse (PS/2)"
+
+#: ../mouse.pm_.c:46
+msgid "ATI Bus Mouse"
+msgstr "ATI Bus Mouse"
+
+#: ../mouse.pm_.c:47
+msgid "Microsoft Bus Mouse"
+msgstr "Microsoft Bus Mouse"
+
+#: ../mouse.pm_.c:48
+msgid "Logitech Bus Mouse"
+msgstr "Logitech Bus Mouse"
+
+#: ../mouse.pm_.c:49
+msgid "USB Mouse"
+msgstr "���� USB"
+
+#: ../mouse.pm_.c:50
+msgid "USB Mouse (3 buttons or more)"
+msgstr "����� USB (� ������ ��� ¦���� ���צ����)"
+
+#: ../partition_table.pm_.c:486
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+"� ��� � ���ͦ��� � �����æ ���Ħ̦�, ��� � �� ���� ��� ��������������.\n"
+"������ Ҧ������ ���� ���� ���������� ��ۦ �����Φ Ц����Ħ�� ���, ���\n"
+"���ͦ��� ��� ����� � ����������� Ц����Ħ����."
+
+#: ../partition_table.pm_.c:572
+#, c-format
+msgid "Error reading file %s"
+msgstr "������� ��� �����Φ ����� %s"
+
+#: ../partition_table.pm_.c:579
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "����������� � ����� %s �� ����������: %s"
+
+#: ../partition_table.pm_.c:581
+msgid "Bad backup file"
+msgstr "������� ��������� ����"
+
+#: ../partition_table.pm_.c:602
+#, c-format
+msgid "Error writing to file %s"
+msgstr "������� ��� ����Ӧ � ���� %s"
+
+#: ../placeholder.pm_.c:5
+msgid "Show less"
+msgstr "�������� ���"
+
+#: ../placeholder.pm_.c:6
+msgid "Show more"
+msgstr "�������� ¦����"
+
+#: ../printer.pm_.c:244
+msgid "Local printer"
+msgstr "��������� �������"
+
+#: ../printer.pm_.c:245
+msgid "Remote lpd"
+msgstr "���������� lpd"
+
+#: ../printer.pm_.c:246
+msgid "SMB/Windows 95/98/NT"
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../printer.pm_.c:247
+msgid "NetWare"
+msgstr "NetWare"
+
+#: ../printerdrake.pm_.c:75
+msgid "Local Printer Options"
+msgstr "��æ� ���������� ��������"
+
+#: ../printerdrake.pm_.c:76
+msgid ""
+"Every print queue (which print jobs are directed to) needs a\n"
+"name (often lp) and a spool directory associated with it. What\n"
+"name and directory should be used for this queue?"
+msgstr ""
+"������ ������� ������� ���� ����� (����� lp) �� �������Ҧ� ���\n"
+"���̦έ�, ��� � ��� ��'�����. ��� ����� �� �������Ҧ� �� ������\n"
+"����������� ��� ����� ��������?"
+
+#: ../printerdrake.pm_.c:79
+msgid "Name of queue:"
+msgstr "����� ��������:"
+
+#: ../printerdrake.pm_.c:79
+msgid "Spool directory:"
+msgstr "�������Ҧ� ���̦έ�:"
+
+#: ../printerdrake.pm_.c:90
+msgid "Select Printer Connection"
+msgstr "����Ҧ�� �'������� ��������"
+
+#: ../printerdrake.pm_.c:91
+msgid "How is the printer connected?"
+msgstr "�� ������� �'�������"
+
+#: ../printerdrake.pm_.c:99
+msgid "Detecting devices..."
+msgstr "�������� ������ϧ..."
+
+#: ../printerdrake.pm_.c:99
+msgid "Test ports"
+msgstr "������ �����"
+
+#: ../printerdrake.pm_.c:112
+#, c-format
+msgid "A printer, model \"%s\", has been detected on "
+msgstr "������ \\\"%s\\\" �������� �������� �� "
+
+#: ../printerdrake.pm_.c:119
+msgid "Local Printer Device"
+msgstr "��������� �����Ҧ� ��������"
+
+#: ../printerdrake.pm_.c:120
+msgid ""
+"What device is your printer connected to \n"
+"(note that /dev/lp0 is equivalent to LPT1:)?\n"
+msgstr ""
+"�� ����� �������� Ц�'������� ��� �����Ҧ� (צ�ͦ����,\n"
+"�� /dev/lp0 ��� ����, �� � LPT1:)?\n"
+
+#: ../printerdrake.pm_.c:121
+msgid "Printer Device:"
+msgstr "�����Ҧ� ��������: "
+
+#: ../printerdrake.pm_.c:125
+msgid "Remote lpd Printer Options"
+msgstr "��æ� צ��������� ��������"
+
+#: ../printerdrake.pm_.c:126
+msgid ""
+"To use a remote lpd print queue, you need to supply\n"
+"the hostname of the printer server and the queue name\n"
+"on that server which jobs should be placed in."
+msgstr ""
+"��� ��������������� צ�������� lpd �������, �� ����� ������� �����\n"
+"����� �����-������� �� ����� �������� �� ����� ���Ԧ."
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote hostname:"
+msgstr "����� צ��������� �����:"
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote queue"
+msgstr "��������� ����� ��������"
+
+#: ../printerdrake.pm_.c:134
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "��æ� SMB (Windows 9x/NT) ��������"
+
+#: ../printerdrake.pm_.c:135
+msgid ""
+"To print to a SMB printer, you need to provide the\n"
+"SMB host name (Note! It may be different from its\n"
+"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
+"well as the share name for the printer you wish to access and any\n"
+"applicable user name, password, and workgroup information."
+msgstr ""
+"��� ��������� �� SMB ������Ҧ �� ����� ������� ����� SMB �����\n"
+"(���ͦ����: ���� ���� צ�Ҧ������� צ� ���� TCP/IP �����!) � �������\n"
+"����� IP ������ ����� ������� ����� � ������ ���צ�� �� ����-����\n"
+"������ ����������� ����� � �������, �� ������� ������."
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server IP:"
+msgstr "IP ������ SMB �������:"
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server host:"
+msgstr "����� ����� SMB �������:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "Password:"
+msgstr "������:"
+
+#: ../printerdrake.pm_.c:141
+msgid "Share name:"
+msgstr "����� �������:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "User name:"
+msgstr "��'� �����������:"
+
+#: ../printerdrake.pm_.c:142
+msgid "Workgroup:"
+msgstr "������ �����:"
+
+#: ../printerdrake.pm_.c:157
+msgid "NetWare Printer Options"
+msgstr "��æ� �������� NetWare"
+
+#: ../printerdrake.pm_.c:158
+msgid ""
+"To print to a NetWare printer, you need to provide the\n"
+"NetWare print server name (Note! it may be different from its\n"
+"TCP/IP hostname!) as well as the print queue name for the printer you\n"
+"wish to access and any applicable user name and password."
+msgstr ""
+"��� ����, ��� ��������� �� NetWare �����-�����Ҧ, �� �����Φ\n"
+"������� ����� �����-������� (��������! ���� ���� צ�Ҧ������� צ�\n"
+"TCP/IP ���Φ �����!) ����� � ������ ��������, ���� �� ������\n"
+"������������� �� צ���צ���� ������ ����������� � �������."
+
+#: ../printerdrake.pm_.c:162
+msgid "Print Queue Name:"
+msgstr "����� ��������:"
+
+#: ../printerdrake.pm_.c:162
+msgid "Printer Server:"
+msgstr "������� ������:"
+
+#: ../printerdrake.pm_.c:173
+msgid "Yes, print ASCII test page"
+msgstr "���, ����������� ������� ���Ҧ��� � ASCII"
+
+#: ../printerdrake.pm_.c:174
+msgid "Yes, print PostScript test page"
+msgstr "���, ����������� ������� ���Ҧ��� � PostScript"
+
+#: ../printerdrake.pm_.c:175
+msgid "Yes, print both test pages"
+msgstr "���, ����������� ����צ �����צ ���Ҧ���"
+
+#: ../printerdrake.pm_.c:183
+msgid "Configure Printer"
+msgstr "�����ϧ�� �������"
+
+#: ../printerdrake.pm_.c:184
+msgid "What type of printer do you have?"
+msgstr "���� ��� ��������, �� �� �����"
+
+#: ../printerdrake.pm_.c:204
+msgid "Printer options"
+msgstr "��æ� ��������"
+
+#: ../printerdrake.pm_.c:205
+msgid "Paper Size"
+msgstr "���ͦ� ������"
+
+#: ../printerdrake.pm_.c:206
+msgid "Eject page after job?"
+msgstr "������� ���Ҧ��� Ц��� ��˦������ �����?"
+
+#: ../printerdrake.pm_.c:209
+msgid "Fix stair-stepping text?"
+msgstr "���������� ����� \"��������\"?"
+
+#: ../printerdrake.pm_.c:212
+msgid "Uniprint driver options"
+msgstr "��æ� �������� Uniprint"
+
+#: ../printerdrake.pm_.c:213
+msgid "Color depth options"
+msgstr "��æ� ������� �������"
+
+#: ../printerdrake.pm_.c:223
+msgid "Do you want to test printing?"
+msgstr "�� �� ������ ����������� ���� ����?"
+
+#: ../printerdrake.pm_.c:234
+msgid "Printing test page(s)..."
+msgstr "������ ������� ���Ҧ���(���Ҧ���)..."
+
+#: ../printerdrake.pm_.c:252
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+"Does it work properly?"
+msgstr ""
+"������� ���Ҧ��� �������� ������ͦ �����.\n"
+"����� ���, �� ������� ����� ���������, ������� ������ \n"
+"������ �����:\n"
+"%s\n"
+"\n"
+"������ ���. �� צ� ������ ��������?"
+
+#: ../printerdrake.pm_.c:256
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Does it work properly?"
+msgstr ""
+"������� ���Ҧ��� �������� ������ͦ �����.\n"
+"����� ���, �� ������� ����� ���������, ������� ������\n"
+"������ ���. �� צ� ������ ��������?"
+
+#: ../raid.pm_.c:36
+#, c-format
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "�� ���� ������ Ц����Ħ� �� _�������������_ RAID md%d"
+
+#: ../raid.pm_.c:106
+msgid "Can't write file $file"
+msgstr "�� ���� �������� ���� $file"
+
+#: ../raid.pm_.c:146
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "����������� Ц����Ħ̦� ��� RAID Ҧ��� %d\n"
+
+#: ../standalone/draksec_.c:28
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive: it must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"��� Ҧ���� ���Ҧ��� ��������������� � ������Φ���. ��� ������Ѥ ¦���\n"
+"������ ������������ ����� ��������, ��� � ����������� ����Ħ����. ��\n"
+"����� ������������� ����� ��������, ���� ���� �'������ ������� ��\n"
+"����� ������, ��� �� ���������. ����̦ �� ���������������� � æ�\n"
+"�����ͦ."
+
+#: ../standalone/draksec_.c:31
+msgid ""
+"Password are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"����̦ ����� ������Φ, ��� ��� ���� �� ��������դ���� �������������\n"
+"��� ����'������ � ����֦."
+
+#: ../standalone/draksec_.c:32
+msgid ""
+"Few improvements for this security level, the main one is that there are\n"
+"more security warnings and checks."
+msgstr ""
+"����� ��������� �� ����� Ҧ�Φ �������. ������� ���������� - ¦����\n"
+"˦��˦��� ��צ������� ��� ��������� ������� �� ¦���� ˦��˦���\n"
+"����צ���."
+
+#: ../standalone/draksec_.c:34
+msgid ""
+"This is the standard security recommended for a computer that will be used\n"
+"to connect to the Internet as a client. There are now security checks. "
+msgstr ""
+"�� - ����������� Ҧ���� �������, ���� ��������դ���� ���� ��\n"
+"����'���Ҧ, Ц���������� �� ��������� � ����Ԧ �̦����. ����צ���\n"
+"������� ����� ������Φ."
+
+#: ../standalone/draksec_.c:36
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which accept\n"
+"connections from many clients. "
+msgstr ""
+"�� ����� Ҧ�Φ ������� ������� ����� ��������������� � ����Ԧ �������.\n"
+"����� ������� ��� æ�� ������� ����� ������Φ� ��� ����, ���\n"
+"��������������� �� �� ������, �� �������� �'������� �� �����\n"
+"�������� �̦��Ԧ�."
+
+#: ../standalone/draksec_.c:39
+msgid ""
+"We take level 4 features, but now the system is entirely closed.\n"
+"Security features are at their maximum."
+msgstr ""
+"�� �������� 4 Ҧ���� �������, ��� ����� ������� � ���Φ��� ��������.\n"
+"�Ӧ ������ ������� ����� �� ��������� Ҧ�Φ."
+
+#: ../standalone/draksec_.c:49
+msgid "Setting security level"
+msgstr "������������ Ҧ��� �������"
+
+#: ../standalone/drakxconf_.c:21
+msgid "Choose the tool you want to use"
+msgstr "����Ҧ�� ������, ����� �� ������ �������������"
+
+#: ../standalone/drakxservices_.c:21
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"����Ҧ��, �˦ ���צ�� ����� ���������� ����������� ��� ����������Φ �������"
+
+#: ../standalone/mousedrake_.c:30
+msgid "no serial_usb found\n"
+msgstr "�� �������� serial_usb\n"
+
+#: ../standalone/mousedrake_.c:35
+msgid "Emulate third button?"
+msgstr "�ͦ�������� ��� ������?"
+
+#: ../standalone/rpmdrake_.c:25
+msgid "reading configuration"
+msgstr "������� ���Ʀ����æ�"
+
+#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
+#: ../standalone/rpmdrake_.c:253
+msgid "File"
+msgstr "����"
+
+#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
+#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
+msgid "Search"
+msgstr "�����"
+
+#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
+msgid "Package"
+msgstr "�����"
+
+#: ../standalone/rpmdrake_.c:51
+msgid "Text"
+msgstr "�����"
+
+#: ../standalone/rpmdrake_.c:53
+msgid "Tree"
+msgstr "������"
+
+#: ../standalone/rpmdrake_.c:54
+msgid "Sort by"
+msgstr "��������� ��"
+
+#: ../standalone/rpmdrake_.c:55
+msgid "Category"
+msgstr "������Ҧ�"
+
+#: ../standalone/rpmdrake_.c:58
+msgid "See"
+msgstr "������"
+
+#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
+msgid "Installed packages"
+msgstr "���������Φ ������"
+
+#: ../standalone/rpmdrake_.c:60
+msgid "Available packages"
+msgstr "�Ӧ ������"
+
+#: ../standalone/rpmdrake_.c:62
+msgid "Show only leaves"
+msgstr "�������� Ԧ���� �ͦ��"
+
+#: ../standalone/rpmdrake_.c:67
+msgid "Expand all"
+msgstr "��������� ���"
+
+#: ../standalone/rpmdrake_.c:68
+msgid "Collapse all"
+msgstr "�������� ���"
+
+#: ../standalone/rpmdrake_.c:70
+msgid "Configuration"
+msgstr "���Ʀ����æ�"
+
+#: ../standalone/rpmdrake_.c:71
+msgid "Add location of packages"
+msgstr "������ ͦ�������������� ����Ԧ�"
+
+#: ../standalone/rpmdrake_.c:75
+msgid "Update location"
+msgstr "�������� ͦ��������������"
+
+#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
+msgid "Remove"
+msgstr "������"
+
+#: ../standalone/rpmdrake_.c:100
+msgid "Configuration: Add Location"
+msgstr "���Ʀ����æ�: ������ ͦ���"
+
+#: ../standalone/rpmdrake_.c:101
+msgid "Expand Tree"
+msgstr "��������� ������"
+
+#: ../standalone/rpmdrake_.c:102
+msgid "Collapse Tree"
+msgstr "�������� ������"
+
+#: ../standalone/rpmdrake_.c:103
+msgid "Find Package"
+msgstr "������ ������"
+
+#: ../standalone/rpmdrake_.c:104
+msgid "Find Package containing file"
+msgstr "������ �����, �� ͦ����� ����"
+
+#: ../standalone/rpmdrake_.c:105
+msgid "Toggle between Installed and Available"
+msgstr "���������� ͦ� ������������ �� ���������"
+
+#: ../standalone/rpmdrake_.c:139
+msgid "Files:\n"
+msgstr "�����:\n"
+
+#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
+msgid "Uninstall"
+msgstr "�Ŧ����������"
+
+#: ../standalone/rpmdrake_.c:163
+msgid "Choose package to install"
+msgstr "����Ҧ�� ����� ��� ���������"
+
+#: ../standalone/rpmdrake_.c:190
+msgid "Checking dependencies"
+msgstr "����צ��� �����������"
+
+#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
+msgid "Wait"
+msgstr "�������"
+
+#: ../standalone/rpmdrake_.c:209
+msgid "The following packages are going to be uninstalled"
+msgstr "� ������ ������ �Ŧ�������������"
+
+#: ../standalone/rpmdrake_.c:210
+msgid "Uninstalling the RPMs"
+msgstr "�Ŧ������� RPM'�"
+
+#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
+msgid "Regexp"
+msgstr "���. �����"
+
+#: ../standalone/rpmdrake_.c:229
+msgid "Which package are looking for"
+msgstr "���� ����� �������"
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+#, c-format
+msgid "%s not found"
+msgstr "�� �������� %s."
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No match"
+msgstr "��צ���צ�Φ���"
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No more match"
+msgstr "����� ���Ҧ����"
+
+#: ../standalone/rpmdrake_.c:246
+msgid ""
+"rpmdrake is currently in ``low memory'' mode.\n"
+"I'm going to relaunch rpmdrake to allow searching files"
+msgstr ""
+"rpmdrake ����� ����������� � ����ͦ ``������ϧ ���'�Ԧ''.\n"
+"� �������� ������������� rpmdrake, ��� ��������� ����� ���̦�."
+
+#: ../standalone/rpmdrake_.c:253
+msgid "Which file are you looking for"
+msgstr "���� ���� �� �������"
+
+#: ../standalone/rpmdrake_.c:269
+msgid "What are looking for"
+msgstr "�� �� �������"
+
+#: ../standalone/rpmdrake_.c:289
+msgid "Give a name (eg: `extra', `commercial')"
+msgstr "����� ����� (��: `������', `��������')"
+
+#: ../standalone/rpmdrake_.c:291
+msgid "Directory"
+msgstr "�������Ҧ�"
+
+#: ../standalone/rpmdrake_.c:294
+msgid "No cdrom available (nothing in /mnt/cdrom)"
+msgstr "����� �������-����� (����� ���� � /mnt/cdrom)"
+
+#: ../standalone/rpmdrake_.c:298
+msgid "URL of the directory containing the RPMs"
+msgstr "URL �������Ҧ�, �� ͦ����� RPM"
+
+#: ../standalone/rpmdrake_.c:299
+msgid ""
+"For FTP and HTTP, you need to give the location for hdlist\n"
+"It must be relative to the URL above"
+msgstr ""
+"��� FTP �� HTTP �� �����Φ ������ ͦ������������ hdlist\n"
+"���� ������� ����������� צ������ URL ���������� ����"
+
+#: ../standalone/rpmdrake_.c:302
+msgid "Please submit the following information"
+msgstr "����-�����, ������� ���� �������æ�"
+
+#: ../standalone/rpmdrake_.c:304
+#, c-format
+msgid "%s is already in use"
+msgstr "%s ��� ����������դ����"
+
+#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
+#: ../standalone/rpmdrake_.c:329
+msgid "Updating the RPMs base"
+msgstr "�������� ���� RPM"
+
+#: ../standalone/rpmdrake_.c:328
+#, c-format
+msgid "Going to remove entry %s"
+msgstr "������ ����� %s"
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves"
+msgstr "�������� ����Ԧ"
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves takes some time"
+msgstr "����������� ������� ���� ������� ������ ���"
+
+#~ msgid "Polish"
+#~ msgstr "��������"
+
+#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
+#~ msgstr "������� ������� ������ ����Ԧ�: %d�� �� ��ͦ������� � %d��"
+
+#~ msgid "Going to install %d MB. You can choose to install more programs"
+#~ msgstr ""
+#~ "�������� ���������� %d ��. �� ������ ��������� ���������� ��ۦ ��������."