diff options
Diffstat (limited to 'perl-install/share/po/sr@Latn.po')
| -rw-r--r-- | perl-install/share/po/sr@Latn.po | 21158 |
1 files changed, 0 insertions, 21158 deletions
diff --git a/perl-install/share/po/sr@Latn.po b/perl-install/share/po/sr@Latn.po deleted file mode 100644 index 4475d000f..000000000 --- a/perl-install/share/po/sr@Latn.po +++ /dev/null @@ -1,21158 +0,0 @@ -# Cirilicni prevod drakbootdisk.po fajla. -# Copyright (C) 1997-2003 MandrakeSERBIA. -# Tomislav Jankovic <tomaja@net.yu>, 2000. -# -# -msgid "" -msgstr "" -"Project-Id-Version: DrakX\n" -"POT-Creation-Date: 2003-12-03 03:09+0100\n" -"PO-Revision-Date: 2003-02-28 18:21+0100\n" -"Last-Translator: Toma Jankovic_<tomaja@net.yu>\n" -"Language-Team: Serbian <i18n@mandrake.co.yu>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-2\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 0.9.6\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Scanning partitions to find mount points" -msgstr "Skeniranje particija za pronalaženje tačke montiranja" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of suid root files." -msgstr "" -"ukoliko je podešeno na da, označite dodavanje/uklanjanje za suid root " -"fajlove." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " -"0/1 for Local Config...\n" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Configuration changed - restart clusternfs/dhcpd?" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t\tErase=%s" -msgstr "\t\tErase=%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Differential backups only save files that have changed or are new since the " -"original 'base' backup." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "network printer port" -msgstr "port mrežnog štampača" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Please insert floppy disk:" -msgstr "Ubacite disketu:" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "DrakTermServ" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "PCMCIA" -msgstr "PCMCIA" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"The backup partition table has not the same size\n" -"Still continue?" -msgstr "" -"Pohranjena(snimljena) tabela particija nije iste veličine\n" -"Želite da nastavite ?" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Which username" -msgstr "Koje korisničko ime" - -#: ../../any.pm:1 -#, c-format -msgid "Which type of entry do you want to add?" -msgstr "Koju vrstu unosa dodajete ?" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Restore partition table" -msgstr "Obnovi tabelu particija" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Configure hostname..." -msgstr "Podešavanje miša" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "On CUPS server \"%s\"" -msgstr "Na CUPS server \"%s\"" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Post-install configuration" -msgstr "Postinstalaciona konfiguracija" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"The current security level is %s\n" -"Select permissions to see/edit" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``%s'' instead" -msgstr "Umesto toga probajte ``%s''" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Type" -msgstr "Tip" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Also printers configured with the PPD files provided by their manufacturers " -"or with native CUPS drivers cannot be transferred." -msgstr "" -"\n" -"Takođe, štampači konfigurisani sa PPD fajlovima koji potiču od proizvođača " -"ili sa osnovnim CUPS drajverima ne mogu biti prebačeni." - -#: ../../lang.pm:1 -#, c-format -msgid "Sri Lanka" -msgstr "Šri Lanka" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" -"Sledeći štamačr\n" -"\n" -"%s%s\n" -"je direktno povezan na vaš sistem" - -#: ../../lang.pm:1 -#, c-format -msgid "Central African Republic" -msgstr "Centralno Afrička Republika" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway device" -msgstr "Gateway uređaj" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Advanced preferences" -msgstr "Napredne opcije" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Net Method:" -msgstr "Mrežni metod:" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Ethernetcard" -msgstr "Mrežna kartica" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "If set, send the mail report to this email address else send it to root" -msgstr "" -"ukoliko je podešeno, pošaljite izveštaj na ovu email adresu uli je pošaljite " -"root-u." - -#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Parameters" -msgstr "Parametri" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "no" -msgstr "Info" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Auto-detect" -msgstr "Auto-detekcija" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Interface:" -msgstr "Interfejs:" - -#: ../../steps.pm:1 -#, c-format -msgid "Select installation class" -msgstr "Izaberite inst.klasu" - -#: ../../network/tools.pm:1 -#, c-format -msgid "" -"The system doesn't seem to be connected to the Internet.\n" -"Try to reconfigure your connection." -msgstr "" -"Izgleda da sistem nije konektovan na Internet.\n" -"Probajte da promenite konfiguraciju." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Connect your printer to a Linux server and let your Windows machine(s) " -"connect to it as a client.\n" -"\n" -"Do you really want to continue setting up this printer as you are doing now?" -msgstr "" -"Povežite vaš štampač na Linux server i dozvolite vašoj Windows mašini(ama) " -"da se konektuje na nju kao klijent.\n" -"\n" -"Da li zaista želite da nastavite da podešavate ovaj štampač kao što to sada " -"radite?" - -#: ../../lang.pm:1 -#, c-format -msgid "Belarus" -msgstr "Beolorusija" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Error writing to file %s" -msgstr "Greška kod unosa u datoteka %s" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Report check result to syslog" -msgstr "ukoliko je podešeno na da, pošaljite izveštaj o proveri u syslog." - -#: ../../services.pm:1 -#, c-format -msgid "" -"apmd is used for monitoring battery status and logging it via syslog.\n" -"It can also be used for shutting down the machine when the battery is low." -msgstr "" -"apmd se koristi za praćenje statusa baterije i logovanje preko syslog.\n" -"Koristi se i za gašenje mašine (radi i na desktop mašinama) kada je baterija " -"slaba" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use tape to backup" -msgstr "Koristi traku za backup" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be installed" -msgstr "Sledeći paketi treba da budu instalirani" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "CUPS configuration" -msgstr "CUPS konfiguracija" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Total progress" -msgstr "Ukupan napredak" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Not enough free space to allocate new partitions" -msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving" -msgstr "Premeštanje" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via %s:\n" -"\n" -msgstr "" -"\n" -"Drakbackup aktivnosti preko %s:\n" -"\n" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "yes" -msgstr "Da" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "(" -msgstr "(" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Welcome to The Network Configuration Wizard.\n" -"\n" -"We are about to configure your internet/network connection.\n" -"If you don't want to use the auto detection, deselect the checkbox.\n" -msgstr "" -"Dobrodošli u program za Podešavanje Mrežne konekcije\n" -"\n" -"Sada treba da konfigurišemo vašu internet/mrežnu konekciju.\n" -"Ukoliko ne želite auto detekciju, deselektujte opciju.\n" - -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, c-format -msgid ")" -msgstr ")" - -#: ../../lang.pm:1 -#, c-format -msgid "Lebanon" -msgstr "Liban" - -#: ../../mouse.pm:1 -#, c-format -msgid "MM HitTablet" -msgstr "MM HitTablet" - -#: ../../services.pm:1 -#, c-format -msgid "Stop" -msgstr "Stop" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Edit selected host" -msgstr "Uredi selektovanog hosta" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD device defined!" -msgstr "Nije određen CD uređaj!" - -#: ../../network/shorewall.pm:1 -#, c-format -msgid "" -"Please enter the name of the interface connected to the " -"internet. \n" -" \n" -"Examples:\n" -" ppp+ for modem or DSL connections, \n" -" eth0, or eth1 for cable connection, \n" -" ippp+ for a isdn connection.\n" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "\tUse .backupignore files\n" -msgstr "Koristi quota zar backup fajlove" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (phonetic)" -msgstr "Bugarski (fonetski)" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "The DHCP start ip" -msgstr "DHCP startni ip" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "256 kB" -msgstr "256 kB" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Don't rewind tape after backup" -msgstr "Koristi traku za backup" - -#: ../../any.pm:1 -#, c-format -msgid "Bootloader main options" -msgstr "Glavne opcije startera" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" -"usbtable] [--dynamic=dev]" -msgstr "" -"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" -"usbtable] [--dynamic=dev]" - -#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Tape" -msgstr "Traka" - -#: ../../lang.pm:1 -#, c-format -msgid "Malaysia" -msgstr "Malezija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning network..." -msgstr "Skeniram mrežu ..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"With this option you will be able to restore any version\n" -" of your /etc directory." -msgstr "" -"Sa ovom opcijom moći ćete da obnovite bilo koju verziju\n" -" vašeg /etc direktorijuma." - -#: ../../standalone/drakedm:1 -#, fuzzy, c-format -msgid "The change is done, do you want to restart the dm service ?" -msgstr "Mreža mora da se restartuje. Da li želite da je restartujete ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (French layout)" -msgstr "Švajcarski (Francuski raspored)" - -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed (maybe raidtools are missing?)" -msgstr "mkraid neuspelo (možda nedostaje raidtools ?)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "August" -msgstr "Avgust" - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "FTP server" -msgstr "NTP Server" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Webcam" -msgstr "Veb kamera" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "size of the (second level) cpu cache" -msgstr "Veličina (drugi nivo) procesorskog keša" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Soundcard" -msgstr "Zvučna kartica" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Month" -msgstr "Mesec" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Search for files to restore" -msgstr "Izaberitedrugi medij za obnavljanje sa" - -#: ../../lang.pm:1 -#, c-format -msgid "Luxembourg" -msgstr "Luksemburg" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\".\n" -msgstr "" -"Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu " -"\"%s <fajl>\".\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Level %s\n" -msgstr "Nivo %s\n" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Syriac (phonetic)" -msgstr "Jermenski (fonetski)" - -#: ../../lang.pm:1 -#, c-format -msgid "Iran" -msgstr "Iran" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus" -msgstr "Bus" - -#: ../../lang.pm:1 -#, c-format -msgid "Iraq" -msgstr "Irak" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "connecting to %s ..." -msgstr "konektujem se na Bugzilla čarobnjak ..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Potential LAN address conflict found in current config of %s!\n" -msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Configuring..." -msgstr "Konfiguracija u toku..." - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "" -"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" -"detect the rights parameters.\n" -"If your card is misdetected, you can force the right tuner and card types " -"here. Just select your tv card parameters if needed." -msgstr "" -"Za većinu modernih TV kartica, bttv modul GNU/Linux kernela jednostavno auto-" -"detektuje prave parametre.\n" -"Ukoliko je kartica pogrešno detektovana, ovde možete da podesite pravi " -"tjuner i tip kartice. Samo selektujte parametre za vašu TV karticu ako je " -"potrebno" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Password (again)" -msgstr "Lozinka (ponovite)" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search installed fonts" -msgstr "Traži instalirane fontove" - -#: ../../standalone/drakboot:1 -#, fuzzy, c-format -msgid "Default desktop" -msgstr "Podrazumevano" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on %s\n" -" where you'll find a form to fill in. The information displayed above will " -"be \n" -"transferred to that server." -msgstr "" -"Da bi prijavili bag, kliknite na taster prijava.\n" -"Ovo će otvoriti prozor web pretraživača sa adresom %s\n" -" gde će te pronaći formular koji treba da popunite.Informacija koja je gore " -"prokazana će biti \n" -"prebačena na taj server." - -#: ../../lang.pm:1 -#, c-format -msgid "Venezuela" -msgstr "Venecuela" - -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakconnect:1 -#, c-format -msgid "IP address" -msgstr "IP adresa" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Choose the sizes" -msgstr "Izaberite veličinu" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"List of data corrupted:\n" -"\n" -msgstr "" -"Lista korumpiranih podataka:\n" -"\n" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Can only be mounted explicitly (i.e.,\n" -"the -a option will not cause the file system to be mounted)." -msgstr "" - -#: ../../network/modem.pm:1 -#, c-format -msgid "" -"Your modem isn't supported by the system.\n" -"Take a look at http://www.linmodems.org" -msgstr "" -"Sistem ne podržava vaš modem.\n" -"Drajver potražite na http://www.linmodems.org" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose another partition" -msgstr "Izaberite drugu particiju" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Current user" -msgstr "Trenutni korisnik" - -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Username" -msgstr "Korisničko ime" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Left \"Windows\" key" -msgstr "Levi \"Windows\" taster" - -#: ../../lang.pm:1 -#, c-format -msgid "Guyana" -msgstr "Gvajana" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Server Configuration" -msgstr "dhcpd Server konfiguracija" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Used for directory:\n" -" only owner of directory or file in this directory can delete it" -msgstr "" -"Korišćeno z direktorijum:\n" -" samo vlasnik direktorijuma ili fajla u ovom direktorijumu ga može izbrisati" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on Novell server \"%s\", printer \"%s\"" -msgstr "na Novell serveru \"%s\", štampač \"%s\"" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Printer Name" -msgstr "Print Queue ime:" - -#: ../../../move/move.pm:1 -#, c-format -msgid "Setting up USB key" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Remove a module" -msgstr "Ukloni modul" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Password" -msgstr "Lozinka" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Advanced Configuration" -msgstr "Napredna Konfiguracija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning on your HP multi-function device" -msgstr "Skeniranje na vašem HP multi-funkcionalnom uređaju" - -#: ../../any.pm:1 -#, c-format -msgid "Root" -msgstr "Root" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing RAID to add to" -msgstr "Izaberi postojeći RAID za dodavanje" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (modern \"Q\" model)" -msgstr "Turski (moderni \"Q\" model)" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo message not found" -msgstr "Lilo poruka nije pronađena" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Automatic regeneration of kernel header in /boot for\n" -"/usr/include/linux/{autoconf,version}.h" -msgstr "" -"Automatska regeneracija kernelovog zaglavlja u /boot zar\n" -"/usr/include/linux/{autoconf,version}.h" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "if needed" -msgstr "ukoliko je potrebno" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "" -"We need to install ntp package\n" -" to enable Network Time Protocol" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Failed..." -msgstr "Obnova neuspela..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Store the password for this system in drakbackup configuration." -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Introduction\n" -"\n" -"The operating system and the different components available in the Mandrake " -"Linux distribution \n" -"shall be called the \"Software Products\" hereafter. The Software Products " -"include, but are not \n" -"restricted to, the set of programs, methods, rules and documentation related " -"to the operating \n" -"system and the different components of the Mandrake Linux distribution.\n" -"\n" -"\n" -"1. License Agreement\n" -"\n" -"Please read this document carefully. This document is a license agreement " -"between you and \n" -"MandrakeSoft S.A. which applies to the Software Products.\n" -"By installing, duplicating or using the Software Products in any manner, you " -"explicitly \n" -"accept and fully agree to conform to the terms and conditions of this " -"License. \n" -"If you disagree with any portion of the License, you are not allowed to " -"install, duplicate or use \n" -"the Software Products. \n" -"Any attempt to install, duplicate or use the Software Products in a manner " -"which does not comply \n" -"with the terms and conditions of this License is void and will terminate " -"your rights under this \n" -"License. Upon termination of the License, you must immediately destroy all " -"copies of the \n" -"Software Products.\n" -"\n" -"\n" -"2. Limited Warranty\n" -"\n" -"The Software Products and attached documentation are provided \"as is\", " -"with no warranty, to the \n" -"extent permitted by law.\n" -"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " -"law, be liable for any special,\n" -"incidental, direct or indirect damages whatsoever (including without " -"limitation damages for loss of \n" -"business, interruption of business, financial loss, legal fees and penalties " -"resulting from a court \n" -"judgment, or any other consequential loss) arising out of the use or " -"inability to use the Software \n" -"Products, even if MandrakeSoft S.A. has been advised of the possibility or " -"occurence of such \n" -"damages.\n" -"\n" -"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " -"COUNTRIES\n" -"\n" -"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " -"in no circumstances, be \n" -"liable for any special, incidental, direct or indirect damages whatsoever " -"(including without \n" -"limitation damages for loss of business, interruption of business, financial " -"loss, legal fees \n" -"and penalties resulting from a court judgment, or any other consequential " -"loss) arising out \n" -"of the possession and use of software components or arising out of " -"downloading software components \n" -"from one of Mandrake Linux sites which are prohibited or restricted in some " -"countries by local laws.\n" -"This limited liability applies to, but is not restricted to, the strong " -"cryptography components \n" -"included in the Software Products.\n" -"\n" -"\n" -"3. The GPL License and Related Licenses\n" -"\n" -"The Software Products consist of components created by different persons or " -"entities. Most \n" -"of these components are governed under the terms and conditions of the GNU " -"General Public \n" -"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -"licenses allow you to use, \n" -"duplicate, adapt or redistribute the components which they cover. Please " -"read carefully the terms \n" -"and conditions of the license agreement for each component before using any " -"component. Any question \n" -"on a component license should be addressed to the component author and not " -"to MandrakeSoft.\n" -"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " -"Documentation written \n" -"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " -"documentation for \n" -"further details.\n" -"\n" -"\n" -"4. Intellectual Property Rights\n" -"\n" -"All rights to the components of the Software Products belong to their " -"respective authors and are \n" -"protected by intellectual property and copyright laws applicable to software " -"programs.\n" -"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -"Products, as a whole or in \n" -"parts, by all means and for all purposes.\n" -"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " -"MandrakeSoft S.A. \n" -"\n" -"\n" -"5. Governing Laws \n" -"\n" -"If any portion of this agreement is held void, illegal or inapplicable by a " -"court judgment, this \n" -"portion is excluded from this contract. You remain bound by the other " -"applicable sections of the \n" -"agreement.\n" -"The terms and conditions of this License are governed by the Laws of " -"France.\n" -"All disputes on the terms of this license will preferably be settled out of " -"court. As a last \n" -"resort, the dispute will be referred to the appropriate Courts of Law of " -"Paris - France.\n" -"For any question on this document, please contact MandrakeSoft S.A. \n" -msgstr "" -"Upoznavanje\n" -"\n" -"Operativni sistem i druge komponente dostupne u Mandrake Linux " -"distribuciji \n" -"na dalje će biti zvane \"Softverski Proizvodi\" . Softverski proizvodi " -"uključuju, ali nisu i \n" -"ograničeni na, skup programa, metoda, pravila i dokumentaciju koja je " -"vezanaza operativni \n" -"sistem i druge komponente Mandrake Linux distribucije.\n" -"\n" -"\n" -"1. Licencni ugovor\n" -"\n" -"Pažljivo pročitajte ovaj dokument. Ovaj dokument je licencni ugovor " -"izmeđuizmeđu vas i \n" -"MandrakeSoft S.A. koji polaže pravo na Softverske Proizvode.\n" -"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom " -"vidu, vi eksplicitno \n" -"prihvatate i potpuno se slažete sa prihvatanjem postavki i uslova i stanja u " -"ovoj Licenci. \n" -"Ukoliko se ne slažete sa bilo kojim delom Licence, nemate pravo da " -"instalirate, kopirate ili koristite \n" -"Softverske proizvode. \n" -"Bilo koji pokušaj instalacije, dupliciranja ili upotrebe Softverskih " -"Proizvoda na način koji se ne slaže sa \n" -"postavkama i uslovima ove Licence će voditi gubitku vaših prava pod ovom \n" -"Licencom. Na osnovu gubitka Licence, morate odmah uništitisve kopije \n" -"Softverskih Proizvoda.\n" -"\n" -"\n" -"2. Ograničena Garancija\n" -"\n" -"Softverski Proizvodi i prateća dokumentracija su omogućene \"kao takve\", i " -"bez garancije, do granica \n" -"koje su dozvoljene zakonom.\n" -"MandrakeSoft S.A. neće, u svim uslovima i u granicama zakona, biti ogovoran " -"za bilo koje specijalne,\n" -"slučajne, direktne ili indirektne štete (uključujući neograničeneštete ili " -"gubitke \n" -"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tražnje i " -"kazne koje su rezultat sudske \n" -"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili " -"nemogućnosti korišćenja Softverskih \n" -"Proizvoda, čak iako je MandrakeSoft S.A. savetovao i ukazivao na mogućnost " -"pojave takve \n" -"štete.\n" -"\n" -"Ograničena odgovornosti vezane za posedovanje ili upotrebu zabranjenog " -"softvera u nekim zemljama\n" -"\n" -"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi " -"distributeri neće, ni pod kojim uslovima, biti \n" -"odgovorni za specijalne, namerne direktne ili indirektne štete(uključujući " -"neograničene \n" -"štete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, " -"zakonske tražnje \n" -"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje " -"proizilaze \n" -"iz upotrebe ili nemogućnosti korišćenja Softverskih Komponenti ili koje " -"proizilaze download-ovanih softverskih komponenti \n" -"bilo kog Mandrake Linux sajta koji su zabranjeni ili ograničeni u nekim " -"zemljama po lokalnim zakonima.\n" -"Ova ograničena prava se primenjuju, ali nisu i ograničena na,kriptografske " -"komponente \n" -"koje se nalaze u Softverskim Proizvodima.\n" -"\n" -"\n" -"3. GPL i za nju vezane Licence\n" -"\n" -"Softverski proizvodi se sastoje od komponenti kreiranih od strane različtih " -"lica ili entiteta. Većina \n" -"od ovih komponenti se nalaze pod postavkama i uslovima GNU Opšte Javne \n" -"Licence, koja se od sada zove \"GPL\", ili slične licence. Većina ovih " -"licenci dozvoljava upotrebu, \n" -"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. " -"Molimo Vas da pažljivo pročitte postavke \n" -"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje " -"komponenete. Bilo koje pitanje \n" -"vezano za licencu komponenti treba da bude adresirano na autora komponente a " -"nena MandrakeSoft.\n" -"Programi koje je razvio MandrakeSoft S.A. podležu pod GPL Licencu. " -"Dokumentacija pisana od \n" -"strane MandrakeSoft S.A. podleže pod posebnu licencu. Molim da pogledate " -"dokumentaciju \n" -"za detalje.\n" -"\n" -"\n" -"4. Prava na Intelektualnu svojinu\n" -"\n" -"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i " -"ona \n" -"su zaštićena zakonima o intelektualnoj svojini i pravima koji se primenjuju " -"na softverske programe.\n" -"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju " -"SoftverskihProizvoda, kako za celinu tako i za \n" -"delove, za sve sve svrhe i sve upotrebe.\n" -"\"Mandrake\", \"Mandrake Linux\" i pridruženi logotipi i oznake MandrakeSoft " -"S.A. \n" -"\n" -"\n" -"5. Zakonska prava \n" -"\n" -"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van sudske " -"odluke, ovaj \n" -"deo se isključuje iz ovog ugvora. Obavezni ste da primenjujeteostale delove " -"ovog\n" -"ugovora.\n" -"Postavke i uslovi ove Licence su određeni Zakonima Francuske.\n" -"Svi nesporazumi bi trebali biti rešeni van suda. Kao poslednje \n" -"sredstvo, nesporazumi će biti upućeni na odgovarajuće Sudske ustanove u " -"Parizu - Francuska.\n" -"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte " -"MandrakeSoft S.A. \n" - -#: ../../standalone/drakboot:1 -#, fuzzy, c-format -msgid "Default user" -msgstr "Default štampač" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"the progress bar x coordinate\n" -"of its upper left corner" -msgstr "" -"x koordinata trake sa prikazom napretka\n" -"od svog gornjeg levog ugla" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Current interface configuration" -msgstr "Trenutna konfiguracija interfejsa" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPD - Line Printer Daemon" -msgstr "LPD - Line Printer Demon" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"\n" -"If you have an ISA card, the values on the next screen should be right.\n" -"\n" -"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " -"card.\n" -msgstr "" -"\n" -"Ukoliko imate ISA karticu, vrednosti na sledećem ekranu bi trebale biti " -"ispravne.\n" -"\n" -"Ukoliko imate PCMCIA karticu, morate znati irq i io za vašu karticu.\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not print any test page" -msgstr "Nemoj da štampaj bilo koju test stranicu" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Gurmukhi" -msgstr "Gurmuki" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "%s already in use\n" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Force No APIC" -msgstr "Obavezno No APIC" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "This password is too short (it must be at least %d characters long)" -msgstr "Ova lozinka je suviše jednostavna (treba da ima bar %d znakova)" - -#: ../../standalone.pm:1 -#, c-format -msgid "[keyboard]" -msgstr "[keyboard]" - -#: ../../network/network.pm:1 -#, c-format -msgid "FTP proxy" -msgstr "FTP proxy" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install List" -msgstr "Instaliraj listu" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Change\n" -"Restore Path" -msgstr "" -"Promeni\n" -"putanju za Obnavljanje" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Show only for the selected day" -msgstr "Prikaži samo za izabrani dan" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tLimit disk usage to %s MB\n" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "512 kB" -msgstr "512 kB" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "(Note: Parallel ports cannot be auto-detected)" -msgstr "(Napomena: Paralelni portovi ne mogu biti auto-detektovani)" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>N" -msgstr "<control>N" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "What kind of card do you have?" -msgstr "Kakvu vrstu kartice imate?" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>O" -msgstr "<control>O" - -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Security" -msgstr "Sigurnost" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can also use the graphical interface \"xpdq\" for setting options and " -"handling printing jobs.\n" -"If you are using KDE as desktop environment you have a \"panic button\", an " -"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " -"jobs immediately when you click it. This is for example useful for paper " -"jams.\n" -msgstr "" -"Takođe možete da koristite i grafički interfejs \"xpdq\" za opcije za " -"podešavanje poslova štampanja.\n" -"Ako koristite KDE kao desktop okruženje imate \"panično dugme\", ikonicu na " -"desktopu, označenu sa \"ZAUSTAVI Štampač!\",koji zaustavlja sve poslove " -"štampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se " -"zaglavi papir.\n" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "<control>Q" -msgstr "<control>Q" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Unable to find backups to restore...\n" -msgstr "Izaberite podatke za obnavljanje..." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Unknown" -msgstr "Nepoznato" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "This server is already in the list, it cannot be added again.\n" -msgstr "Ovaj server već postoji na listi, i ne može se ponovo dodati.\n" - -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Network Configuration" -msgstr "Podešavanje mreže" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>S" -msgstr "<control>S" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"Protocol for the rest of the world\n" -"No D-Channel (leased lines)" -msgstr "" -"Protokol za Ostatak sveta \n" -" bez D-kanala (zakupljene linije)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - /etc/xinetd.d/tftp:\n" -" \tdrakTermServ will configure this file to work in conjunction with " -"the images created\n" -" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " -"the boot image to \n" -" \teach diskless client.\n" -"\n" -" \tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \tservice tftp\n" -"\t\t\t{\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t}\n" -" \t\t\n" -" \tThe changes here from the default installation are changing the " -"disable flag to\n" -" \t'no' and changing the directory path to /var/lib/tftpboot, where " -"mkinitrd-net\n" -" \tputs its images." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s must be a number!" -msgstr "Opcija %s mora biti broj!" - -#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 -#, c-format -msgid "Notice" -msgstr "Napomena" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You have not configured X. Are you sure you really want this?" -msgstr "Niste podesili X. Da li ste sigurni da želite to?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The configuration of the printer will work fully automatically. If your " -"printer was not correctly detected or if you prefer a customized printer " -"configuration, turn on \"Manual configuration\"." -msgstr "" -"Podešavanje štampača će biti potpuno automatsko. Ukoliko vaš štampač nije " -"ispravno detektovan ili želite da sami podešavate štampač, uključite \"Ručna " -"konfiguracija\"." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "What type of partitioning?" -msgstr "Koju vrstu particioniranja?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"file list sent by FTP: %s\n" -" " -msgstr "" -"lista fajlova poslana preko FTP-a: %s\n" -" " - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Interface" -msgstr "Interfejs" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Multisession CD" -msgstr " (multi-sesija)" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "comma separated strings" -msgstr "odvojeni stringovi sa zarezom" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "These are the machines from which the scanners should be used:" -msgstr "" -"Ovo su mašine i mreže na kojima se nalaze lokalno povezani skeneri koji bi " -"trebali biti dostupni:" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Messages" -msgstr "Poruke" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|CPH06X (bt878) [many vendors]" -msgstr "Nepoznati|CPH06X (bt878) [mnogi proizvođači]" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "POP and IMAP Server" -msgstr "POP i IMAP Server" - -#: ../../lang.pm:1 -#, c-format -msgid "Mexico" -msgstr "Meksiko" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Model stepping" -msgstr "Model stepping" - -#: ../../lang.pm:1 -#, c-format -msgid "Rwanda" -msgstr "Ruanda" - -#: ../../lang.pm:1 -#, c-format -msgid "Switzerland" -msgstr "Švajcarska" - -#: ../../lang.pm:1 -#, c-format -msgid "Brunei Darussalam" -msgstr "Bruneji Darussalam" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Do you have any %s interfaces?" -msgstr "Imate li još %s interfejsa?" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "You must be root to read configuration file. \n" -msgstr "Backup-uj sada iz konfiguracionog fajla" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote lpd Printer Options" -msgstr "Opcije za udaljeni lpd" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"GNU/Linux is a multi-user system, meaning each user may have their own\n" -"preferences, their own files and so on. You can read the ``Starter Guide''\n" -"to learn more about multi-user systems. But unlike \"root\", who is the\n" -"system administrator, the users you add at this point will not be\n" -"authorized to change anything except their own files and their own\n" -"configurations, protecting the system from unintentional or malicious\n" -"changes that impact on the system as a whole. You will have to create at\n" -"least one regular user for yourself -- this is the account which you should\n" -"use for routine, day-to-day use. Although it is very easy to log in as\n" -"\"root\" to do anything and everything, it may also be very dangerous! A\n" -"very simple mistake could mean that your system will not work any more. If\n" -"you make a serious mistake as a regular user, the worst that will happen is\n" -"that you will lose some information, but not affect the entire system.\n" -"\n" -"The first field asks you for a real name. Of course, this is not mandatory\n" -"-- you can actually enter whatever you like. DrakX will use the first word\n" -"you typed in this field and copy it to the \"%s\" field, which is the name\n" -"this user will enter to log onto the system. If you like, you may override\n" -"the default and change the username. The next step is to enter a password.\n" -"From a security point of view, a non-privileged (regular) user password is\n" -"not as crucial as the \"root\" password, but that is no reason to neglect\n" -"it by making it blank or too simple: after all, your files could be the\n" -"ones at risk.\n" -"\n" -"Once you click on \"%s\", you can add other users. Add a user for each one\n" -"of your friends: your father or your sister, for example. Click \"%s\" when\n" -"you have finished adding users.\n" -"\n" -"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" -"that user (bash by default).\n" -"\n" -"When you have finished adding users, you will be asked to choose a user\n" -"that can automatically log into the system when the computer boots up. If\n" -"you are interested in that feature (and do not care much about local\n" -"security), choose the desired user and window manager, then click \"%s\".\n" -"If you are not interested in this feature, uncheck the \"%s\" box." -msgstr "" -"GNU/Linux je višekorisnički sistem, a to znači da svaki korisnik može imati " -"sopstvene\n" -"postavke, sopstvene fajlove, itd. Možete pročitati ``Upustvo za korisnike''\n" -"da bi saznali više o tome. Ali za razliku od \"root\", koji je ustvari " -"administrator, korisnici\n" -"koje dodate ovde neće moći da menjaju bilo šta osim njihovih\n" -"fajlova i njihove konfiguracije. Trebalo bi da kreirate najmanje jednog\n" -"običnog korisnika za sebe. Taj račun je onaj na koji treba da se logujete \n" -"za rutinsko korišćenje. Iako je veoma praktično da se ulogujete kao \"root\" " -"svaki dan,\n" -"to može biti veoma opasno! I najmanja greška može značiti da vaš sistem\n" -"neće više raditi. Ukoliko napravite ozbiljne greške kao obični korisnik \n" -"možete jedino izbgubiti nešto informacija, ali ne i celi sistem.\n" -"\n" -"Prvo, morate da unesete vaše pravo ime. Ovo nije neophodno, naravno -\n" -"jer možete pristupiti i izmeniti ga kada god želite. DrakX će tada uzeti " -"prvu\n" -"reč koji ste uneli i staviti ga u prostor za unošenje imena korisnika " -"\"User\n" -"name\". Ovo je ime koje odreženi korisnik treba da koristi pri logovanju na\n" -"sistem. Možete ga promeniti. YNakon toga morate uneti lozinku ovde.\n" -"Obični, ne-privilegovani korisnička lozinka nije od većeg značaja kao ona " -"za\n" -"\"root\" koriosnika sa sigurnosne tačke gledanja, ali to nije razlog za " -"opuštanje\n" -"- nakon svega, vaši fajlovi su u pitanju.\n" -"\n" -"Ukoliko kliknete na \"Prihvati korisnikar\", možete dodati još korisnika. " -"Dodajte\n" -"korisnika za svakog vašeg prijatelja: za vašeg oca ili sestru, na\n" -"primer. Kada zaršite dodavanje svih željenih korisnika, izaberite \"Završeno" -"\".\n" -"\n" -"Klikom na taster Napredno \"Napredno opcije\" možete izmeniti default \"shell" -"\"\n" -"za trenutnog korisnika (bash po default). \n" -"\n" -"Kada završite sa dodavanjem korisnika, računar će tražiti da izaberete " -"korisnika\n" -"koji će se automatski prijavljivati na sistem pri njegovom startanju. " -"Ukoliko\n" -"vas zanima ova mogućnost (i ne vodite mnogo računa o lokalnoj\n" -"sigurnosti), izaberite željenog korisnika i window menažer, a zatim kliknite " -"na \"Sledeći\n" -"->\". Ukoliko niste zainteresovani za ovu opciju, deselektujte \"Da li " -"želite\n" -"da koristite ovu opciju?\" ." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Configure Internet Access..." -msgstr "Podesi Internet pristup..." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please choose the time interval between each backup" -msgstr "" -"Izaberite vremenski interval \n" -"između svakog backup-a" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Norway" -msgstr "Norveška" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Delete profile" -msgstr "Ukloni profil..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Danish" -msgstr "Danski" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Automatically switch on numlock key locker under console\n" -"and XFree at boot." -msgstr "" -"Automatski uključuje numlock taster pod konzolom\n" -"i u XFree pri startanju." - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Please enter the IP configuration for this machine.\n" -"Each item should be entered as an IP address in dotted-decimal\n" -"notation (for example, 1.2.3.4)." -msgstr "" -"Molim unesite IP konfiguraciju za ovu mašinu.\n" -"Svaka stavka treba de bude tavka treba da bude uneta kao\n" -"IP adresa (na primer, 123.45.67.89)." - -#: ../../help.pm:1 -#, c-format -msgid "" -"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" -"knows if a selected package is located on another CD-ROM so it will eject\n" -"the current CD and ask you to insert the correct CD as required." -msgstr "" -"Mandrake Linux instalacija se nalazi na nekoliko diskova iliti CDROM-ova. " -"DrakX\n" -"zna ukoliko da ukoliko je selktovani paket lociran na drugom CDROM-u i " -"izbaciće\n" -"trenutni CD te tražiti od vas da ubacite odgovarajući." - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "When checked, owner and group won't be changed" -msgstr "kada je selektovana, vlasnik i grupa ne mogu biti promenjeni" - -#: ../../lang.pm:1 -#, c-format -msgid "Bulgaria" -msgstr "Bugarska" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Tuesday" -msgstr "Utorak" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Processors" -msgstr "Procesori" - -#: ../../lang.pm:1 -#, c-format -msgid "Svalbard and Jan Mayen Islands" -msgstr "Svalbard and Jan Mayen Islands" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No NIC selected!" -msgstr "Nijedan NIC nije selektovan!" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Problems occured during configuration.\n" -"Test your connection via net_monitor or mcc. If your connection doesn't " -"work, you might want to relaunch the configuration." -msgstr "" -"Pojavili su se problemi tokom konfiguracije.\n" -"Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko vaša konekcija " -"ne radi, treba da ponovite konfiguraciju" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "partition %s is now known as %s" -msgstr "particija %s je sada poznata kao %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Other files..." -msgstr "backup-ovanje ostalih fajlova..." - -#: ../../lang.pm:1 -#, c-format -msgid "Congo (Kinshasa)" -msgstr "Kongo (Kinšasa)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server IP" -msgstr "SMB server IP:" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Partition table of drive %s is going to be written to disk!" -msgstr "Tabela particija za uređaj %s će biti zapisana na disk!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing HPOJ package..." -msgstr "Instaliram HPOJ paket..." - -#: ../../any.pm:1 -#, c-format -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"LILO (or grub) on your system, or another operating system removes LILO, or " -"LILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures. Would you like to create a bootdisk for your system?\n" -"%s" -msgstr "" -"Startni disk obezbeđuje način podizanja vašeg Linux sistema bez zavisnosti\n" -"od normalnog startera. Ovo je korisno ako ne želite da instalirate\n" -"LILO(ili grub) na vaš sistem, ako drugi operativni sistem ukloni LILO, ili " -"LILO ne\n" -"radi sa vašim hardverom. Startni disk možete koristiti sa Mandrake Linux\n" -"'diskom za spasavanje', što olakšava oporavak u slučaju teže havarije.\n" -"Da li biste da kreirate startnu disketu za vaš sistem? %s" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"\n" -" DrakBackup Daemon Report\n" -msgstr "" -"\n" -" DrakBackup Daemon Izveštaj\n" -"\n" -"\n" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Latvian" -msgstr "Letonski" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "monthly" -msgstr "mesečno" - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Retry" -msgstr "Obnovi" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Module name" -msgstr "Ime modula" - -#: ../../network/network.pm:1 -#, c-format -msgid "Start at boot" -msgstr "Pokreni pri startanju" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use Incremental Backups" -msgstr "" -"Koristi Inkrementalni Backup-ove (ne zamenjuj ih sa starim backup-ovima)" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of drive (MBR)" -msgstr "Prvi sektor diska (MBR)" - -#: ../../lang.pm:1 -#, c-format -msgid "El Salvador" -msgstr "El Salvador" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Joystick" -msgstr "Džojstik" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "DVD" -msgstr "DVD-ROM" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Use Unicode by default" -msgstr "Koristi Unicode po default-u" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the module of the GNU/Linux kernel that handles the device" -msgstr "modul GNU/Linux kernela koji upravlja tim uređajem" - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "Is your hardware clock set to GMT?" -msgstr "Vaš sistemski (BIOS) časovnik je podešen na GMT" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Trying to rescue partition table" -msgstr "Spasavanje tabele particija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s must be an integer number!" -msgstr "Opcija %s mora biti broj!" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Use password to authenticate users" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Koristi lozinku za autentifikaciju korisnika." - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"Entries you'll have to fill:\n" -"%s" -msgstr "" -"Unosi koje treba da popunite:\n" -"%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"For backups to other media, files are still created on the hard drive, then " -"moved to the other media. Enabling this option will remove the hard drive " -"tar files after the backup." -msgstr "" - -#: ../../standalone/livedrake:1 -#, c-format -msgid "Unable to start live upgrade !!!\n" -msgstr "Ne mogu da startujem live upgrade !!!\n" - -#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Name: " -msgstr "Ime: " - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "up" -msgstr "" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "16 million colors (24 bits)" -msgstr "16 miliona boja (24-bitna paleta)" - -#: ../../any.pm:1 -#, c-format -msgid "Allow all users" -msgstr "Dozvoli sve korisnike" - -#: ../advertising/08-store.pl:1 -#, c-format -msgid "The official MandrakeSoft Store" -msgstr "Zvanični MandrakeSoft market" - -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Resizing" -msgstr "Promena veličine (resizing)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Enter the maximum size\n" -" allowed for Drakbackup (MB)" -msgstr "" -"Unesite maksimalnu veličinu\n" -" dozvoljenu za Drakbackup" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Cable connection" -msgstr "Kablovska konekcija" - -#: ../../standalone/drakperm:1 ../../standalone/logdrake:1 -#, c-format -msgid "User" -msgstr "Korisnik" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do new backup before restore (only for incremental backups.)" -msgstr "Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)" - -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed" -msgstr "mkraid neuspelo" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Name" -msgstr "Ime " - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Button 3 Emulation" -msgstr "EmulaciŮa 3 tastera" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check additions/removals of sgid files" -msgstr "ukoliko je podešeno na da, označite dodavanje/uklanjanje sgid fajlova." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Sending files..." -msgstr "Šaljem fajlove..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Israeli (Phonetic)" -msgstr "Jevrejski (Fonetski)" - -#: ../../any.pm:1 -#, c-format -msgid "access to rpm tools" -msgstr "pristup rpm alatima" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You must choose/enter a printer/device!" -msgstr "Morate iabrati/uneti štampač/uređaj!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Permission problem accessing CD." -msgstr "Problemi sa dozvolama pristupa za CD." - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Phone number" -msgstr "Broj telefona" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Error: The \"%s\" driver for your sound card is unlisted" -msgstr "Greška: drajver \"%s\" za vašu zvučnu karticu nije prikazan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer name, description, location" -msgstr "Ime, opis i lokacija štampača" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (broadcast)" -msgstr "USA (broadcast)" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Use Xinerama extension" -msgstr "Koristi Xinerama ekstenziju" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback" -msgstr "Loopback" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "West Europe" -msgstr "Zapadna Evropa" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On CD-R" -msgstr "na CD uređaju" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTIONS] [PROGRAM_NAME]\n" -"\n" -"OPTIONS:\n" -" --help - print this help message.\n" -" --report - program should be one of mandrake tools\n" -" --incident - program should be one of mandrake tools" -msgstr "" -"[OPTIONS] [PROGRAM_NAME]\n" -"\n" -"OPCIJE:\n" -" --help - prikazuje ovaj tekst koji sada čitate.\n" -" --report - program treba da bude jedan od mandrake alata\n" -" --incident - program treba da bude jedan od mandrake alata" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Harddrake2 version %s" -msgstr "Harddrake2 verzija %s" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Preferences" -msgstr "Karakteristike: " - -#: ../../lang.pm:1 -#, c-format -msgid "Swaziland" -msgstr "Svazilend" - -#: ../../lang.pm:1 -#, c-format -msgid "Dominican Republic" -msgstr "Dominikanska Republika" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Copying %s" -msgstr "Kopiranje %s" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Choose color" -msgstr "Izaberite boju" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Syriac" -msgstr "Sirija" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Set-UID" -msgstr "Podesi-UID" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Choose the hard drive you want to erase in order to install your new\n" -"Mandrake Linux partition. Be careful, all data present on this partition\n" -"will be lost and will not be recoverable!" -msgstr "" -"Izaberite hard disk koji želite da izbrišete da bi instalirali novu Mandrake " -"Linux \n" -"particiju. Budite pažljivi, svi podaci na njemu će biti izgubljeni\n" -"i neće se moći povratiti!" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Use the %c and %c keys for selecting which entry is highlighted." -msgstr "Koristi %c i %c slova da bi oznacili izbor" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 2 Button Mouse" -msgstr "Generički 2 tastera miš" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to execute the file" -msgstr "" - -#: ../../lvm.pm:1 -#, c-format -msgid "Remove the logical volumes first\n" -msgstr "Ukloni prvo logičke volumene\n" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "The highlighted entry will be booted automatically in %d seconds." -msgstr "Oznaceni izbor se podize automatski za %d sekundi" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Can't write /etc/sysconfig/bootsplash\n" -"File not found." -msgstr "" -"Ne mogu da upišem u /etc/sysconfig/bootsplash\n" -"Fajl ne postoji." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet access" -msgstr "Internet pristup" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"y coordinate of text box\n" -"in number of characters" -msgstr "" -"y koorditnata tekst boksa\n" -"u broju karaktera" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To get a list of the options available for the current printer click on the " -"\"Print option list\" button." -msgstr "" -"Da bi dobili listu dostupnih opcija za trenutni štampač kliknite na taster " -"\"Lista opcija štampača\"." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Enabling servers..." -msgstr ">Omogućavam servisi..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing test page(s)..." -msgstr "Štampam test stran(ice)u..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Transfer successful\n" -"You may want to verify you can login to the server with:\n" -"\n" -"ssh -i %s %s@%s\n" -"\n" -"without being prompted for a password." -msgstr "" -"Transfer je bio uspešan\n" -"Ako želite da porverite možete se prijaviti na server sa:\n" -"\n" -"ssh -i %s %s@%s\n" -"\n" -"bez traženja lozinke." - -#: ../../fsedit.pm:1 -#, c-format -msgid "There is already a partition with mount point %s\n" -msgstr "Već postoji particija sa tačkom montiranja %s\n" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Enable/Disable msec hourly security check." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući msec proveru sigurnosti na svaki čas." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, you need to decide where you want to install the Mandrake\n" -"Linux operating system on your hard drive. If your hard drive is empty or\n" -"if an existing operating system is using all the available space you will\n" -"have to partition the drive. Basically, partitioning a hard drive consists\n" -"of logically dividing it to create the space needed to install your new\n" -"Mandrake Linux system.\n" -"\n" -"Because the process of partitioning a hard drive is usually irreversible\n" -"and can lead to lost data if there is an existing operating system already\n" -"installed on the drive, partitioning can be intimidating and stressful if\n" -"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" -"simplifies this process. Before continuing with this step, read through the\n" -"rest of this section and above all, take your time.\n" -"\n" -"Depending on your hard drive configuration, several options are available:\n" -"\n" -" * \"%s\": this option will perform an automatic partitioning of your blank\n" -"drive(s). If you use this option there will be no further prompts.\n" -"\n" -" * \"%s\": the wizard has detected one or more existing Linux partitions on\n" -"your hard drive. If you want to use them, choose this option. You will then\n" -"be asked to choose the mount points associated with each of the partitions.\n" -"The legacy mount points are selected by default, and for the most part it's\n" -"a good idea to keep them.\n" -"\n" -" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" -"all the space available on it, you will have to create free space for\n" -"Linux. To do so, you can delete your Microsoft Windows partition and data\n" -"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" -"partition. Resizing can be performed without the loss of any data, provided\n" -"you have previously defragmented the Windows partition and that it uses the\n" -"FAT format. Backing up your data is strongly recommended.. Using this\n" -"option is recommended if you want to use both Mandrake Linux and Microsoft\n" -"Windows on the same computer.\n" -"\n" -" Before choosing this option, please understand that after this\n" -"procedure, the size of your Microsoft Windows partition will be smaller\n" -"then when you started. You will have less free space under Microsoft\n" -"Windows to store your data or to install new software.\n" -"\n" -" * \"%s\": if you want to delete all data and all partitions present on\n" -"your hard drive and replace them with your new Mandrake Linux system,\n" -"choose this option. Be careful, because you will not be able to undo your\n" -"choice after you confirm.\n" -"\n" -" !! If you choose this option, all data on your disk will be deleted. !!\n" -"\n" -" * \"%s\": this will simply erase everything on the drive and begin fresh,\n" -"partitioning everything from scratch. All data on your disk will be lost.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"%s\": choose this option if you want to manually partition your hard\n" -"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" -"easily lose all your data. That's why this option is really only\n" -"recommended if you have done something like this before and have some\n" -"experience. For more instructions on how to use the DiskDrake utility,\n" -"refer to the ``Managing Your Partitions '' section in the ``Starter\n" -"Guide''." -msgstr "" -"U ovom trenutku, morate da izaberete gde ćete instalirati\n" -"Mandrake Linux operativni sistem na vaš hard disk. Ukoliko je prazan ili\n" -"postojeći operativni sistem koristi sav postojeći prostor na disku, treba da " -"ga\n" -"particionirate. U osnovi, particioniranje hard diska se sastoji logičkog\n" -"deljenja da bi obezbedili prostor za instalaciju vaš novi Mandrake Linux " -"sistem.\n" -"\n" -"Pošto su efekti procesa particioniranja obično nepovratni,\n" -"particioniranje može biti prilično stresan proces za neiskusne korisnike.\n" -"Ovaj čarobnjak ga pojednostavljuje. Pre početka, konsultujte upustvo i ne " -"žurite.\n" -"\n" -"Ukoliko ste pokrenuli instalaciju u Ekspert modu, pokrenućete\n" -"DiskDrake, Mandrake Linux-ov alat za particije, koji vam dozvoljavaw da\n" -"fino podesite vaše particije. Pogledajte DiskDrake sekciju u ``User " -"Guide''.\n" -"Iz instalacionog interfejsa, možete koristiti čarobnjake kao što je opisano " -"ovde\n" -"klikom na dijalogov \"Čarobnjak\" taster.\n" -"\n" -"Ukoliko su particije već kreirane, od predhodne instalacije \n" -"ilikreirane drugim alatom za particioniranje, morate izabrati \n" -" na koje od njih ćete instalirati Linux sistem.\n" -"\n" -"Ukoliko particije nisu definisane, marate da ih kreirate. \n" -"Da bi to uradili, možete da koristite gore postavljeni čarobnjak. U " -"zavisnosti \n" -"od konfiguracije hard diska, postoji nekoliko mogućnosti:\n" -"\n" -" * \"Koristi slobodan prostor\": ova opcija će jednostavno dovesti do " -"automatskog\n" -"particioniranja vašeg praznog(ih) diska(ova). Neće vam biti postavljana " -"daljna pitanja;\n" -"\n" -" * \"Koristi postojeće particije\": čarobnjak je detektovao jednu ili više \n" -"postojećih Linux particija na vašem hard disku. Ukoliko\n" -"želite da njihj koristite, izaberite ovu opciju.\n" -"\n" -" * \"Koristi slobodan prostor na Windows particiji\": ukoliko je Microsoft " -"Windows\n" -"instaliran na vašem disku i on zauzima sav postojeći prostor na njemu,\n" -"moraćete da kreirate slobodan prostor za Linux. Da bi to uradili, možete " -"izbrisati\n" -"Microsoft Windows particiju i podatke (pogledajte `Brisanje celog diska'' " -"ili ``Ekspert\n" -"mod'' opcije) ili da promenite veličinu Microsoft Windows particije. Promena " -"veličine\n" -"se može isvesti bez gubljenja podataka, ali se pteporučuje da prvo " -"defragmentirate\n" -"Windows particiju iz samog Windows-a. Backup podataka takođe nije loša " -"ideja..\n" -"Ovo rešenje se preporučuje ukoliko želite da koristite Mandrake Linux i\n" -"Microsoft Windows na istom kompjuteru.\n" -"\n" -" Pre nego što izaberete ovu opciju, morate da razumete da nakon ove " -"procedure\n" -"veličina vaše Microsoft Windows particije će biti manja\n" -"u odnosu na trenutno stanje. Imađete manje slobodnog prostora u Microsoft\n" -"Windows-u za smeštanje podataka ili instalaiju novog softvera;\n" -"\n" -" * \"Brisanje cvelog diska\": ukoliko želite da izbrišete sve podatke i sve\n" -"particije koji postoje na vašem hard disku i zamenite ih vašim\n" -"novim Mandrake Linux sistemom, možete da izaberete ovu ociju. Budite\n" -"pažljivisa ovom opcijom, jer nećete biti u mogućnosti\n" -"da povratite staro stanje nakon potvrde.\n" -"\n" -" !! Ukoliko izaberete ovu opciju, svi podaci na disku će biti " -"izgubljeni. !!\n" -"\n" -" * \"Ukloni Windows\": ova opcija će jednostavno izbrisati sve sa hard diska " -"i\n" -"kreirati nove particije. Svi podaci na vašem disku\n" -"će biti izbrisani;\n" -"\n" -" !! Ukoliko izaberete ovu opciju, svi podaci na disku će biti " -"izgubljeni. !!\n" -"\n" -" * \"Custom particionisanje diska\": izaberite ovu opciju ukoliko želite\n" -"da ručno vaš hard disk. Budite pažljivi -- ovo je moćan\n" -"ali opasan izbor i vrlo lako možete izgubiti svoje podatke. Zbog toga se\n" -"ova opcija preporučuje samo onima koji imaju iskustva\n" -"od ranije. Za više podataka o tome kako da koristite\n" -"program DiskDrake, pogledajte poglavlje ``Upravljajte svojim particijama '' " -"u\n" -"``Početnički vodič''." - -#: ../../lang.pm:1 -#, c-format -msgid "Ukraine" -msgstr "Ukrajina" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Application:" -msgstr "Aplikacija:" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "External ISDN modem" -msgstr "Eksterni ISDN modem" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report check result by mail." -msgstr "ukoliko kažete da, pošaljite rezultat provere mail-om." - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (default %s) " -msgstr "Vaš izbor ? (po default-u %s) " - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Trouble shooting" -msgstr "Pomoć " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -"Printing status:\n" -"%s\n" -"\n" -msgstr "" -"Test stran(ice)a je poslana štampač demonu.\n" -"To može dovesti do malog odlaganja starta štampača.\n" -"Status štampača:\n" -"%s\n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "daily" -msgstr "dnevno" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "and one unknown printer" -msgstr "i jedan nepoznati štampač" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Ireland" -msgstr "Irska" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Restore Configuration " -msgstr " Obnavljanje Konfiguracije " - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Is this the correct setting?" -msgstr "Da li je ovo ispravno podešeno?" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"You will now set up your Internet/network connection. If you wish to\n" -"connect your computer to the Internet or to a local network, click \"%s\".\n" -"Mandrake Linux will attempt to autodetect network devices and modems. If\n" -"this detection fails, uncheck the \"%s\" box. You may also choose not to\n" -"configure the network, or to do it later, in which case clicking the \"%s\"\n" -"button will take you to the next step.\n" -"\n" -"When configuring your network, the available connections options are:\n" -"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" -"simple LAN connection (Ethernet).\n" -"\n" -"We will not detail each configuration option - just make sure that you have\n" -"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" -"from your Internet Service Provider or system administrator.\n" -"\n" -"You can consult the ``Starter Guide'' chapter about Internet connections\n" -"for details about the configuration, or simply wait until your system is\n" -"installed and use the program described there to configure your connection." -msgstr "" -"Sada treba da podesite vašu Internet/mrežnu konekciju. Ukoliko\n" -"želite da konektujete svoj kompjuter na Internet ili na lokalnu mrežu, " -"kliknite\n" -"\"Sledeći ->\". Nakon toga će se pokrenuti autodetekcija mrežnih uređaja i " -"modema. Ukoliko\n" -"ova autodetekcija ne uspe, deselektujte \"Koristi autodetekciju\" sledeći " -"put.Vi\n" -"takođe možete izabrati da ne podešavate mrežu sada , nego kasnije; u tom " -"slučaju,\n" -"jednostavno kliknite na taster \"Poništi\".\n" -"\n" -"Ovaj program nudi podešavanje Internet konekcije u\n" -"toku instalacije. Moguće konekcije su: tradicionalni modem, ISDN\n" -"modem, ADSL konekcija, kablovski modem, i na kraju jednostavna LAN " -"konekcija\n" -"(Ethernet).\n" -"\n" -"Ovde nećemo detaljno opisivati svaku konfiguraciju. Jednostavno proverite da " -"li imate\n" -"sve parametre, kao što su IP adresa, default gateway, DNS serveri, itd. \n" -"od vašeg Internet Provajdera ili sistemskog administratora.\n" -"\n" -"Možete konsultovati i deo upustva o Internet konekcijama ``Starter Guide'' " -"za detalje\n" -"o konfiguraciji, ili jednostavno sačekajte da vam se sistem instalira i\n" -"onda pokrenite program koji je tamo opisan za podešavanje vaše konekcije." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Wizard Configuration" -msgstr "Čarobnjak Konfiguracija" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Autoprobe" -msgstr "Automatska proba" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"if set to yes, check for :\n" -"\n" -"- empty passwords,\n" -"\n" -"- no password in /etc/shadow\n" -"\n" -"- for users with the 0 id other than root." -msgstr "" -"ukoliko je podešene na da, proverite prazne lozinke, bez lozinke u /etc/" -"shadow i korisnike sa 0 id različih od root." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup system files..." -msgstr "Backup sistemskih fajlova..." - -#: ../../any.pm:1 -#, c-format -msgid "Can't use broadcast with no NIS domain" -msgstr "Nije moguć prenos bez NIS domena" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing printer \"%s\"..." -msgstr "Uklanjam štampač \"%s\" ..." - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Shell history size" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "drakfloppy" -msgstr "drakfloppy" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"Please indicate where the auto_install.cfg file is located.\n" -"\n" -"Leave it blank if you do not want to set up automatic installation mode.\n" -"\n" -msgstr "" -"Ukažite na mesto gde se auto_install.cfg fajl nalazi.\n" -"\n" -"Ostavite ga nepopunjenim ukoliko ne želite da automatski instalacioni mod.\n" -"\n" - -#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configured on other machines" -msgstr "Podesi servise" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "information level that can be obtained through the cpuid instruction" -msgstr "Nivo informacija koji može biti dobavljen kroz cpuid instrukcije" - -#: ../../lang.pm:1 -#, c-format -msgid "Peru" -msgstr "Peru" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " on device: %s" -msgstr " na uređaj: %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Remove Windows(TM)" -msgstr "Ukloni Windows(TM)" - -#: ../../services.pm:1 -#, c-format -msgid "Starts the X Font Server (this is mandatory for XFree to run)." -msgstr "Pokreće X Font server (potrebno za pokretanje XFree)." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"Most of these values were extracted\n" -"from your running system.\n" -"You can modify as needed." -msgstr "" -"Većina ovih vrednosti je izvučena iz\n" -"vašeg dosadašnjeg sistema.\n" -"MOžete ih izmeniti po potrebi." - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Select the font file or directory and click on 'Add'" -msgstr "Izaberite font ili direktorijum i kliknite na 'Dodaj'" - -#: ../../lang.pm:1 -#, c-format -msgid "Madagascar" -msgstr "Madagaskar" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Urpmi" -msgstr "Urpmi" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Cron not available yet as non-root" -msgstr "Cron nije dostupan još uvek za non-root" - -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "System" -msgstr "Sistem" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Do you want to use this feature?" -msgstr "Da li želite da koristite ovu opciju ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Arabic" -msgstr "Arapski" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Options:\n" -msgstr "" -"\n" -"- Opcije:\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Password required" -msgstr "Potrebna je Lozinka" - -#: ../../common.pm:1 -#, c-format -msgid "%d minutes" -msgstr "%d minuta" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Graphics card: %s" -msgstr "Grafička kartica: %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WebDAV transfer failed!" -msgstr "WebDAV transfer nije uspeo!" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "XFree configuration" -msgstr "XFree konfiguracija" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Choose action" -msgstr "Izaberite akciju" - -#: ../../lang.pm:1 -#, c-format -msgid "French Polynesia" -msgstr "Fransuska Polinezija" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Usually, DrakX has no problems detecting the number of buttons on your\n" -"mouse. If it does, it assumes you have a two-button mouse and will\n" -"configure it for third-button emulation. The third-button mouse button of a\n" -"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" -"right mouse buttons. DrakX will automatically know whether your mouse uses\n" -"a PS/2, serial or USB interface.\n" -"\n" -"If for some reason you wish to specify a different type of mouse, select it\n" -"from the list provided.\n" -"\n" -"If you choose a mouse other than the default, a test screen will be\n" -"displayed. Use the buttons and wheel to verify that the settings are\n" -"correct and that the mouse is working correctly. If the mouse is not\n" -"working well, press the space bar or [Return] key to cancel the test and to\n" -"go back to the list of choices.\n" -"\n" -"Wheel mice are occasionally not detected automatically, so you will need to\n" -"select your mouse from a list. Be sure to select the one corresponding to\n" -"the port that your mouse is attached to. After selecting a mouse and\n" -"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" -"the mouse wheel to ensure that it is activated correctly. Once you see the\n" -"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" -"buttons and check that the mouse pointer moves on-screen as you move your\n" -"mouse." -msgstr "" -"DrakX generalno detektuje broj tastera koji vaš miš posdeduje. Ukoliko se to " -"ne desi\n" -"on će pretpostaviti da miš sa dva tastera i podesiće emulaciju trećeg " -"tastera.\n" -"DrakX će automatski prepoznati da li se radi o PS/2, serijskom ili USB " -"mišu.\n" -"\n" -"Ukoliko želite da specificirate drugi tip miša odaberite odgovarajući\n" -"tip sa liste.\n" -"\n" -"Ukoliko izberete miša koji se razlikuje od default-a pojaviće vam se\n" -"test ekran. Koristite tastere i točkiće da bi proverili da li su postavke\n" -"dobre. Ukoliko miš ne radi ispravno pritisnite taster za razmak (space bar) " -"ili\n" -"taster [Return] da bi poništili test i vratili se da bi pokušali ponovo.\n" -"\n" -"Točkići na mišu se ponekad ne detektuju automatski, pa ćete sami morati da\n" -"izaberete miša sa liste. Pazite da izaberete odgovarajući vezano\n" -"za port na koji je miš povezan. nakon izbora miša\n" -"i pritiska na taster \"Sledeći ->\", slika miša će biti prikazana na " -"ekranu.\n" -"Pokrenite toškić da bi proverili da li je pravilno aktiviran. Kada \n" -"vidite da se točkić na ekranu pomera kao i točkić na mišu, testirajte\n" -"tastere i proverite da li kursor na ekrani prati vaše \n" -"pomeranje miša." - -#: ../../services.pm:1 -#, c-format -msgid "Support the OKI 4w and compatible winprinters." -msgstr "Podrška za OKI 4w i kompatibilne mu win štampače." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Files or wildcards listed in a .backupignore file at the top of a directory " -"tree will not be backed up." -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" -msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk" - -#. -PO: the first %s is the card type (scsi, network, sound,...) -#. -PO: the second is the vendor+model name -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Installing driver for %s card %s" -msgstr "Instaliram drajver za %s karticu %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You have transferred your former default printer (\"%s\"), Should it be also " -"the default printer under the new printing system %s?" -msgstr "" -"Prebacili ste svoj bivši default štampač (\"%s\"), Da li treba da bude " -"ponovo default štampač pod novim sistemom za štampanje %s?" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Enable Server" -msgstr "Aktiviraj Server" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Ukrainian" -msgstr "Ukrajinski" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The network access was not running and could not be started. Please check " -"your configuration and your hardware. Then try to configure your remote " -"printer again." -msgstr "" -"Mrežni pristup nije pokrenut i ne može da se startuje. Proverite vašu " -"konfiguraciju i vaše hardverske komponente. Onda probajte ponova da podesite " -"udaljeni štampač." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to write the file" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Boot floppy used in drive %s" -msgstr "Ubacite Boot disketu u uređaj %s" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local network(s)" -msgstr "Lokalna(e) mreža(e)" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Remove Windows" -msgstr "Ukloni Windows(TM)" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Your %s has been configured.\n" -"You may now scan documents using \"XSane\" from Multimedia/Graphics in the " -"applications menu." -msgstr "" -"Vaš %s je podešen.\n" -"Sada možete skenirati vaše dokunete pomoću \"XSane\"programa iz Multimedija/" -"Grafika podmenija iz menija Aplikacije." - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Firewire controllers" -msgstr "Firewire kontroleri" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"After you have configured the general bootloader parameters, the list of\n" -"boot options that will be available at boot time will be displayed.\n" -"\n" -"If there are other operating systems installed on your machine they will\n" -"automatically be added to the boot menu. You can fine-tune the existing\n" -"options by clicking \"%s\" to create a new entry; selecting an entry and\n" -"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" -"changes.\n" -"\n" -"You may also not want to give access to these other operating systems to\n" -"anyone who goes to the console and reboots the machine. You can delete the\n" -"corresponding entries for the operating systems to remove them from the\n" -"bootloader menu, but you will need a boot disk in order to boot those other\n" -"operating systems!" -msgstr "" -"nakon što podesite opšte parametre startera , lista startnih opcija\n" -"će biti dostupna za vreme pokretanja sistema.\n" -"\n" -"Ukoliko postoji još operativnih sistema na vašem računaru oni će automatski\n" -"biti dodani u startni meni. Možete ih i detaljno podesiti\n" -"ako kliknete na \"Dodaj\" da bi kreirali novi uos, izaberete postojeći \n" -"klikom na \"Izmeni\" ili \"Ukloni\" ako želite da ih izmenite ili uklonite. " -"\"U redu\" prihvata\n" -"vaše izmene.\n" -"\n" -"Ako budete želeli da dozvolite nekom drugom da ima pristup ostalim " -"operativnim sistemima\n" -"ako restartuje sistem. Možete da izbrišete\n" -"odgovarajuće unose za operativne sisteme iz startnog menija, ali će vam onda " -"biti \n" -"potrebna startna disketa da bi mogli da pristupite ovim\n" -"operativnim sistemima!" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "System mode" -msgstr "Sistemski mod" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print on a NetWare printer, you need to provide the NetWare print server " -"name (Note! it may be different from its TCP/IP hostname!) as well as the " -"print queue name for the printer you wish to access and any applicable user " -"name and password." -msgstr "" -"Da biste mogli da štampate na NetWare štampač, treba da navedete ime " -"NetWare servera za štampač (koje nije uvek isto kao TCP/IPhostname! );te " -"ime 'reda' štampača kome pristupate,kao i potrebna korisnička imena i " -"lozinke." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Netmask:" -msgstr "Mrežna maska:" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Do it later" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Append" -msgstr "Dodatak" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Refresh printer list (to display all available remote CUPS printers)" -msgstr "" -"Osveži listu štampača (da bi prikazao sve dostupne udaljene CUPS štampače)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"When this option is turned on, on every startup of CUPS it is automatically " -"made sure that\n" -"\n" -"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" -"\n" -"- if /etc/cups/cupsd.conf is missing, it will be created\n" -"\n" -"- when printer information is broadcasted, it does not contain \"localhost\" " -"as the server name.\n" -"\n" -"If some of these measures lead to problems for you, turn this option off, " -"but then you have to take care of these points." -msgstr "" -"Kada se ova opcija uključi, svako pokretanje CUPS automatski osiguravamo da\n" -"\n" -"- ukoliko je LPD/LPRng instaliran, /etc/printcap neće biti preisan od strane " -"CUPS-a\n" -"\n" -"- ukoliko /etc/cups/cupsd.conf nedostaje, biće kreiran\n" -"\n" -"- kada se objavi informacija o štampaču, ona ne sadrži \"localhost\" kao ime " -"servera.\n" -"\n" -"Ukoliko vam neke od ovih mera predstavljaju problem, isključite ovu opciju, " -"ali ćete sami morati da podesite ove opcije." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"The auto install can be fully automated if wanted,\n" -"in that case it will take over the hard drive!!\n" -"(this is meant for installing on another box).\n" -"\n" -"You may prefer to replay the installation.\n" -msgstr "" -"Auto instalacija može biti potpuno automatizovana ukoliko želite,\n" -"u tom slučaju preuzeće kontrolu nad hard-diskom!!\n" -"(ovo se odnosi na instalaciju na drugoj mašini).\n" -"\n" -"Možda volite da ponovite instalaciju.\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Network printer \"%s\", port %s" -msgstr "Mrežni štamapč \"%s\", port %s" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Please choose what network adapter will be connected to your Local Area " -"Network." -msgstr "Izaberite koji će mrežni adapter biti korišten za LANmrežu." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "OK to restore the other files." -msgstr "U Redu za obnavanje drugih fajlova." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please choose your keyboard layout." -msgstr "Izaberite raspored tastature." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer Device URI" -msgstr "Uređaj za štampač URI" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not erasable media!" -msgstr "Medij nije izbrisiv!" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Terminal-based" -msgstr "Bazirano na terminalu" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Enable/Disable IP spoofing protection." -msgstr "" -"Argumenti: (arg, alert=1)\n" -"\n" -"Omogući/Onemogući IP spoofing zaštitu." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing a printing system in the %s security level" -msgstr "Instaliram sistem za štampanje u %s sigurnosnom nivou" - -#: ../../any.pm:1 -#, c-format -msgid "The user name is too long" -msgstr "Korisničko ime već je predugačko" - -#: ../../any.pm:1 -#, c-format -msgid "Other OS (windows...)" -msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WebDAV remote site already in sync!" -msgstr "WebDAV udaljeni sajt je već u sync!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Reading printer database..." -msgstr "Učitavam CUPS bazu podataka..." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Generate auto install floppy" -msgstr "Kreiraj auto instalacionu disketu" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\t\t user name: %s\n" -"\t\t on path: %s \n" -msgstr "" -"\t\t korisničko ime: %s\n" -"\t\t na putanji: %s \n" - -#: ../../lang.pm:1 -#, c-format -msgid "Somalia" -msgstr "Somalija" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No open source driver" -msgstr "Nema open source drajvera" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Def." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"This is similar to the previous level, but the system is entirely closed and " -"security features are at their maximum." -msgstr "" -"Ovo je slično prethodnom nivou, ali je sada sistem potpuno zatvoren i " -"sigurnosne opcije su maksimalne." - -#: ../../lang.pm:1 -#, c-format -msgid "Nicaragua" -msgstr "Nikaragva" - -#: ../../lang.pm:1 -#, c-format -msgid "New Caledonia" -msgstr "Nova Kaledonija" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "European protocol (EDSS1)" -msgstr "Evropski protokol (EDSS1)" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Delete" -msgstr "/_Briši" - -#: ../../any.pm:1 -#, c-format -msgid "Video mode" -msgstr "Video mod" - -#: ../../lang.pm:1 -#, c-format -msgid "Oman" -msgstr "Oman" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Please enter your email address below " -msgstr "Unesite svoju email adresu dole" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Network Monitoring" -msgstr "Praćenje stanja mreže" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "SunOS" -msgstr "SunOS" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "New size in MB: " -msgstr "Nova veličina u MB:" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Partition table type: %s\n" -msgstr "Tip tabele particija: %s\n" - -#: ../../any.pm:1 -#, c-format -msgid "Authentication Windows Domain" -msgstr "Autentifikacija Windows Domena" - -#: ../../keyboard.pm:1 -#, c-format -msgid "US keyboard" -msgstr "US tastatura" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Buttons emulation" -msgstr "Emulacija tastera" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", network printer \"%s\", port %s" -msgstr ", mrežni štampač \"%s\", port %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via tape:\n" -"\n" -msgstr "" -"\n" -"Drakbackup aktivnosti preko trake:\n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -" FTP connection problem: It was not possible to send your backup files by " -"FTP.\n" -msgstr "" -"\n" -" Problemi sa FTP konekcijom: Nije moguće poslati vaše backup fajlove preko " -"FTP.\n" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Sending Speed:" -msgstr "Brzina pri slanju:" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"The classic bug sound tester is to run the following commands:\n" -"\n" -"\n" -"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" -"by default\n" -"\n" -"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" -"currently uses\n" -"\n" -"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" -"loaded or not\n" -"\n" -"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" -"tell you if sound and alsa services're configured to be run on\n" -"initlevel 3\n" -"\n" -"- \"aumix -q\" will tell you if the sound volume is muted or not\n" -"\n" -"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" -msgstr "" -"Klasični tester zvuka treba da pokrene sledeće komande:\n" -"\n" -"\n" -"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver vaša zvučna " -"kartica koristi \n" -"po default-u\n" -"\n" -"- \"grep sound-slot /etc/modules.conf\" će vam reći koji je drajver " -"trenutno\n" -"u upotrebi\n" -"\n" -"- \"/sbin/lsmod\" će vam omogućiti da proverite da li njegov je drajverov " -"modul\n" -"učitan ili nije\n" -"\n" -"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" će\n" -"vam reći da li su server za zvuk i alsa podešeni za pokretanje u\n" -"initlevel 3\n" -"\n" -"- \"aumix -q\" će vam reći kakav je nivo jačine zvuka\n" -"\n" -"- \"/sbin/fuser -v /dev/dsp\" će vam reći koji program koristi dzvučnu " -"karticu.\n" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Halt bug" -msgstr "Halt bug" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mail alert configuration" -msgstr "KOnfiguracija alarma za Mail" - -#: ../../lang.pm:1 -#, c-format -msgid "Tokelau" -msgstr "Tokelau" - -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Matching" -msgstr "poklapanje" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bosnian" -msgstr "Bosanski" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Release: " -msgstr "Verzija: " - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection speed" -msgstr "Brzina konekcije " - -#: ../../lang.pm:1 -#, c-format -msgid "Namibia" -msgstr "Namibija" - -#: ../../services.pm:1 -#, c-format -msgid "Database Server" -msgstr "Server Baze podataka" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "special capacities of the driver (burning ability and or DVD support)" -msgstr "specijalni kapaciteti uređaja (burning opcija i ili podrška za DVD)" - -#: ../../raid.pm:1 -#, c-format -msgid "Can't add a partition to _formatted_ RAID md%d" -msgstr "Nije moguće dodati particiju na _formatiran_ RAID md%d" - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "Network Time Protocol" -msgstr "Mrežni interfejs" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,\n" -"ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do " -"blokiranja računara.\n" -"Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D." - -#: ../../standalone/draksec:1 -#, c-format -msgid "Please wait, setting security options..." -msgstr "Samo momenat, podešavam sigurnosne opcije..." - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|CPH05X (bt878) [many vendors]" -msgstr "Nepoznati|CPH05X (bt878) [mnogi proizvođači]" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Launch the graphical environment when your system starts" -msgstr "Pokreni X-Window sistem pri stratanju" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "hourly" -msgstr "na sat" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Right Shift key" -msgstr "Desni Alt taster" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Successfuly Restored on %s " -msgstr " Uspešno Obnovljeni na %s " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Making printer port available for CUPS..." -msgstr "Omogućavam port štampača dostupnim za CUPS..." - -#: ../../lang.pm:1 -#, c-format -msgid "Antigua and Barbuda" -msgstr "Antigva i Barbuda" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"!!! Indicates the password in the system database is different than\n" -" the one in the Terminal Server database.\n" -"Delete/re-add the user to the Terminal Server to enable login." -msgstr "" -"!!! Ukazuje da je lozinka u sistemskoj bazi podataka različita\n" -"od one u bazi terminalnog Servera.\n" -"Obrišite/ponovo dodajte korisnika na Terminalnom Serveru da bi omoućili " -"prijavljivanje." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Spanish" -msgstr "Španski" - -#: ../../services.pm:1 -#, c-format -msgid "Start" -msgstr "Start" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Direct root login" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring applications..." -msgstr "Podešavam aplikacije..." - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer, connected directly to the network or to a remote Windows machine.\n" -"\n" -"Please plug in and turn on all printers connected to this machine so that it/" -"they can be auto-detected. Also your network printer(s) and your Windows " -"machines must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-" -"detection of only the printers connected to this machine. So turn off the " -"auto-detection of network and/or Windows-hosted printers when you don't need " -"it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"Dobrodošli u Čarobnjak za podešavanje štampača\n" -"\n" -"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na " -"ovaj računar, poezan direktno na mrežu ili udaljenoj Windows mašini.\n" -"\n" -"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar " -"kao i u električno napajanje da bi mogli biti auto-detektovani. Takođe i " -"mrežni štampač(i)i Windows mašine moraju biti povezane i uključene.\n" -"\n" -"Nemojte da zaboravite da auto-detekcija štampača na mreži traje duže nego za " -"štampače koji se nalaze poveani direktno na vaš računar. Zato isključite " -"auto-detekciju mrežnih i/ili Windows-hosted štampača ako vam to nije " -"potrebno.\n" -"\n" -"Kliknite na \"Sledeći\" kada ste spremni, i na \"Poništi\" ako ne želite da " -"sada podešavate vaš štampač(e)." - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Normal modem connection" -msgstr "Normalna modemska konekcija" - -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "File Selection" -msgstr "Odabir fajlova" - -#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 -#, c-format -msgid "CUPS" -msgstr "CUPS" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Erase tape before backup" -msgstr "Koristi traku za backup" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Run config tool" -msgstr "Pokreni konfiguracioni alat" - -#: ../../any.pm:1 -#, c-format -msgid "Bootloader installation" -msgstr "Instalacija startera" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Root partition size in MB: " -msgstr "Veličina Root particije u MB:" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "This is a mandatory package, it can't be unselected" -msgstr "Ovo je obavezni paket,i ne može biti deselektovan" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create etherboot floppies/CDs:\n" -" \tThe diskless client machines need either ROM images on the NIC, or " -"a boot floppy\n" -" \tor CD to initate the boot sequence. drakTermServ will help " -"generate these\n" -" \timages, based on the NIC in the client machine.\n" -" \t\t\n" -" \tA basic example of creating a boot floppy for a 3Com 3c509 " -"manually:\n" -" \t\t\n" -" \tcat /usr/lib/etherboot/boot1a.bin \\\n" -" \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Etherboot ISO image is %s" -msgstr "Etherboot ISO image je %s" - -#: ../../services.pm:1 -#, c-format -msgid "" -"named (BIND) is a Domain Name Server (DNS) that is used to resolve host " -"names to IP addresses." -msgstr "" -"Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host " -"ime IP adresi." - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Lucia" -msgstr "Sveta Lucija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "November" -msgstr "Novembar" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Disconnect..." -msgstr "Diskonektovan..." - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Report" -msgstr "Prijava" - -#: ../../lang.pm:1 -#, c-format -msgid "Palau" -msgstr "Palau" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "level" -msgstr "nivo" - -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "" -"All incidents will be followed up by a single qualified MandrakeSoft " -"technical expert." -msgstr "" -"Sva pitanja će biti praćena od strane jednog kvalifikovanog MandrakeSoft " -"tehničkog eksperta." - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Package Group Selection" -msgstr "Odabir grupa paketa" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "" -"Allow local hardware\n" -"configuration." -msgstr "Automatska rekonfiguracija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Via Network Protocol: %s" -msgstr "Oblnovi preko Mrežnog protokola: %s" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "You can configure each parameter of the module here." -msgstr "Ovde možete podesiti svaki parametar modula." - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Choose the resolution and the color depth" -msgstr "Izaberite rezoluciju i broj boja pri prikazu" - -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Emulate third button?" -msgstr "Da imitiram rad 3 tastera?" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"You can't create a new partition\n" -"(since you reached the maximal number of primary partitions).\n" -"First remove a primary partition and create an extended partition." -msgstr "" -"Vi ne možete da kreirate novu particiju\n" -"(pošto ste dosegli maksimalan broj primarnih particija).\n" -"Prvo uklonite primarnu particiju a zatim kreirajte extended particiju." - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Mount" -msgstr "Montiraj" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Creating auto install floppy" -msgstr "Kreiram auto instalacionu disketu" - -#: ../../steps.pm:1 -#, c-format -msgid "Install updates" -msgstr "Instaliraj update-ove" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "text box height" -msgstr "visina tekst boksa" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "State" -msgstr "Stanje" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Be sure a media is present for the device %s" -msgstr "Proverite da li je medij prisutan u uređaju %s" - -#: ../../any.pm:1 -#, c-format -msgid "Enable multiple profiles" -msgstr "Omogući multi-profile" - -#: ../../fs.pm:1 -#, c-format -msgid "Do not interpret character or block special devices on the file system." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"These options can backup and restore all files in your /etc directory.\n" -msgstr "" -"Ove opcije mogu sačuvati i kasnije obnoviti sve fajlove u vašem /etc " -"direktorijumu.\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Local printer" -msgstr "Lokalni štampač" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Files Restored..." -msgstr "Fajlovi obnovljeni..." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Package selection" -msgstr "Odabir paketa" - -#: ../../lang.pm:1 -#, c-format -msgid "Mauritania" -msgstr "Mauritanija" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"I can keep your current configuration and assume you already set up a DHCP " -"server; in that case please verify I correctly read the Network that you use " -"for your local network; I will not reconfigure it and I will not touch your " -"DHCP server configuration.\n" -"\n" -"The default DNS entry is the Caching Nameserver configured on the firewall. " -"You can replace that with your ISP DNS IP, for example.\n" -"\t\t \n" -"Otherwise, I can reconfigure your interface and (re)configure a DHCP server " -"for you.\n" -"\n" -msgstr "" -"Mogu da zadržim vašu trenutnu konfiguraciju i pretpostaviti da je već " -"podešen DHCP server; u tom slučaju proverite da li je dobro očitana Mreža " -"koju koristite za vašu lokalnu mrežu; Ja je neću rekonfigurisati i neću " -"dirati u vašu DHCP server konfiguraciju.\n" -"\n" -"default DNS unos je Caching Nameserver podešen na firewall-u. Možete je " -"zameniti sa vašim ISP DNS IP, na primer.\n" -"\t\t \n" -"Inače, ja mogu da rekonfigurišem vaš interfejs i (re)konfigurišem DHCP " -"server za vas.\n" -"\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"No local printer found! To manually install a printer enter a device name/" -"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " -"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " -"printer: /dev/usb/lp1, ...)." -msgstr "" -"Nije pronađen lokalni štampač! Da bi ručno instalirali štampač unesite ime " -"uređaja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/" -"lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, " -"drugi USB štampač: /dev/usb/lp1, ...)." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "All primary partitions are used" -msgstr "Sve primarne particije su zauzete" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "LPD server \"%s\", printer \"%s\"" -msgstr "na LPD serveru \"%s\", štampač \"%s\"" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"After this is done, we recommend that you restart your X environment to " -"avoid any hostname-related problems." -msgstr "" -"Kada se to uradi, trebali bi da restartujete X\n" -"okruženje da bi izbegli probleme sa promenom hostname-a." - -#: ../../services.pm:1 -#, c-format -msgid "Automatic detection and configuration of hardware at boot." -msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema." - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Installation Server Configuration" -msgstr "Podešavanje Instalacionog servera" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Configuring IDE" -msgstr "Konfiguracija IDE" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Network functionality not configured" -msgstr "Mrežna funkcionalnost nije podešena" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Configure module" -msgstr "Modul za podešavanje" - -#: ../../lang.pm:1 -#, c-format -msgid "Cocos (Keeling) Islands" -msgstr "Kokos (Kelingova) Ostrva" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "You'll need to reboot before the modification can take place" -msgstr "Morate restartovati računar da bi se izmene izvršile" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider phone number" -msgstr "Broj telefona provajdera" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Host %s" -msgstr "Host %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Fiji" -msgstr "Fidži" - -#: ../../lang.pm:1 -#, c-format -msgid "Armenia" -msgstr "Jermenija" - -#: ../../any.pm:1 -#, c-format -msgid "Second floppy drive" -msgstr "Drugi flopi/disketni uređaj" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "About Harddrake" -msgstr "O Harddrake-u" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Authorize TCP connections to X Window" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Drive capacity" -msgstr "Kapacitet uređaja" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Insert a floppy in drive\n" -"All data on this floppy will be lost" -msgstr "" -"Ubacite disketu u uređaj\n" -"Svi podaci na disketi će biti izbrisani !" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size: %s" -msgstr "Veličina: %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Control and Shift keys simultaneously" -msgstr "Control i Shift tasteri istovremeno" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "secondary" -msgstr "sekundarno" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Backup Configuration." -msgstr "Pogledaj Backup Konfiguraciju." - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report check result to syslog." -msgstr "ukoliko je podešeno na da, pošaljite izveštaj o proveri u syslog." - -#. -PO: keep this short or else the buttons will not fit in the window -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "No password" -msgstr "Bez lozinke" - -#: ../../lang.pm:1 -#, c-format -msgid "Nigeria" -msgstr "Nigerija" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "%s: %s requires hostname...\n" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no existing partition to use" -msgstr "Nema ni jedne pariticije za rad" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"The following scanners\n" -"\n" -"%s\n" -"are available on your system.\n" -msgstr "" -"Sledeći skeneri\n" -"\n" -"%s\n" -"su direktno povezani na vaš sistem.\n" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on parallel port #%s" -msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print to a TCP or socket printer, you need to provide the host name or IP " -"of the printer and optionally the port number (default is 9100). On HP " -"JetDirect servers the port number is usually 9100, on other servers it can " -"vary. See the manual of your hardware." -msgstr "" -"Da bi štampali na TCP ili socket štampač, morate da obezbedite ime hosta ili " -"IP štampača te (opcija) broj porta (default je 9100). Na HP JetDirect " -"serverima broj porta je obično 9100, a na drugim serverima može biti " -"drugačiji. Pogledajte upustvo koje ste dobili uz hardver." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Hard drive information" -msgstr "Informacije o hard disku" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Russian" -msgstr "Ruski" - -#: ../../lang.pm:1 -#, c-format -msgid "Jordan" -msgstr "Jordan" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Hide files" -msgstr "Sakrij fajlove" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected to this machine" -msgstr "Auto-detekcija štampača povezanih sa ovom mašinom" - -#: ../../any.pm:1 -#, c-format -msgid "Sorry, no floppy drive available" -msgstr "Ti malera, nema diskete" - -#: ../../lang.pm:1 -#, c-format -msgid "Bolivia" -msgstr "Bolivija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Set up your Windows server to make the printer available under the IPP " -"protocol and set up printing from this machine with the \"%s\" connection " -"type in Printerdrake.\n" -"\n" -msgstr "" -"Podesite vaš Windows server da omogući pristup štamapču pod IPP protokolom i " -"podesite štampanje sa ove mašine sa \"%s\" tipom konekcije u Printerdrake-" -"u.\n" -"\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Bad package" -msgstr "Loš paket" - -#: ../advertising/07-server.pl:1 -#, c-format -msgid "" -"Transform your computer into a powerful Linux server: Web server, mail, " -"firewall, router, file and print server (etc.) are just a few clicks away!" -msgstr "" -"Pretvorite svoju mašinu u moćni Linux server sa samo nekoliko poteza mišem: " -"Veb server, email, firewall, ruter, fajl server, server za šampanje, ..." - -#: ../../security/level.pm:1 -#, c-format -msgid "DrakSec Basic Options" -msgstr "DrakSec Osnovne Opcije" - -#: ../../standalone/draksound:1 -#, c-format -msgid "" -"\n" -"\n" -"\n" -"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " -"program. Just type \"sndconfig\" in a console." -msgstr "" -"\n" -"\n" -"\n" -"Napomena: ukoliko iamte ISA PnP zvučnu karticu, moraćete da koristite " -"sndconfig program. Samo ukucajte \"sndconfig\" u konzoli." - -#: ../../lang.pm:1 -#, c-format -msgid "Romania" -msgstr "Rumunija" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Group" -msgstr "grupa" - -#: ../../lang.pm:1 -#, c-format -msgid "Canada" -msgstr "Kanada" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "choose device" -msgstr "izaberite uređaj" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove from LVM" -msgstr "Ukloni sa LVM-a" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Timezone" -msgstr "Vremenska zona" - -#: ../../keyboard.pm:1 -#, c-format -msgid "German" -msgstr "Nemački" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Next ->" -msgstr "Sledeći ->" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Turning on this allows to print plain text files in japanese language. Only " -"use this function if you really want to print text in japanese, if it is " -"activated you cannot print accentuated characters in latin fonts any more " -"and you will not be able to adjust the margins, the character size, etc. " -"This setting only affects printers defined on this machine. If you want to " -"print japanese text on a printer set up on a remote machine, you have to " -"activate this function on that remote machine." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"\n" -"Chances are, this partition is\n" -"a Driver partition. You should\n" -"probably leave it alone.\n" -msgstr "" -"\n" -"Najverovatnije je, da je ova particija\n" -"Driver particija, pa ne bi trebali\n" -"da je dirate.\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Guinea-Bissau" -msgstr "Gvineja-Bisao" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Horizontal refresh rate" -msgstr "Horizontalna frekvencija" - -#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Edit" -msgstr "Izlaz" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Can't unset mount point as this partition is used for loop back.\n" -"Remove the loopback first" -msgstr "" -"Demontiranje nije moguće,jer se particija korisiti za loop back.\n" -"Prvo uklonite loopback" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The network configuration done during the installation cannot be started " -"now. Please check whether the network is accessable after booting your " -"system and correct the configuration using the Mandrake Control Center, " -"section \"Network & Internet\"/\"Connection\", and afterwards set up the " -"printer, also using the Mandrake Control Center, section \"Hardware\"/" -"\"Printer\"" -msgstr "" -"Mrežna konfiguracija koja je kreirana tokom instalcije ne može sada da se " -"pokrene. Proverite da li je mreža dostupna nakon restarta sistema i " -"ispravite konfiguraciju koristeći Mandrake CKontrolni Centar, sekcija " -"\"Mreža & Internet\"/\"Konenkcija\", i nakon toga podesite štampač, takođe " -"korištenjem Mandrake Kontrolnog Centra, sekcija \"Hardver\"/\"Štampač\"" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "USB controllers" -msgstr "USB kontroleri" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "What norm is your TV using?" -msgstr "Kakav sistem vaš TV koristi?" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Type:" -msgstr "Tip:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Share name" -msgstr "Deljeno (zajedničko) ime :" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "enable" -msgstr "omogući" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Contacting Mandrake Linux web site to get the list of available mirrors..." -msgstr "" -"KOntaktirajte Mandrake Linux web sajt da bi dobili listu dostupnih mirror-a" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"A problem occured while restarting the network: \n" -"\n" -"%s" -msgstr "" -"Pojavio se problem tokom restartovanja mreže?\n" -"%s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove the loopback file?" -msgstr "Ukloni loopback fajl ?" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Selected size is larger than available space" -msgstr "Selektovana veličina je veđa od slobodnog prostora" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NCP server name missing!" -msgstr "Nedostaje ime NCP servera!" - -#: ../../any.pm:1 -#, c-format -msgid "Please choose your country." -msgstr "Izaberite svoju zemlju." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hard Disk Backup files..." -msgstr "backup-ovanje fajlova sa hard diska..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Laotian" -msgstr "Laoski" - -#: ../../lang.pm:1 -#, c-format -msgid "Samoa" -msgstr "Samoa" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The rstat protocol allows users on a network to retrieve\n" -"performance metrics for any machine on that network." -msgstr "" -"rstat protokol dozvoljava korisnicima na mreži da omoguće\n" -"merenje performansi za bilo koju mašinu na toj mreži." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Re-generating list of configured scanners ..." -msgstr "Osvežavanje liste podešenih skenera ..." - -#: ../../modules/interactive.pm:1 -#, fuzzy, c-format -msgid "Module configuration" -msgstr "Ručna konfiguracija" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Scanner" -msgstr "Skener" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Warning: testing this graphic card may freeze your computer" -msgstr "Upozorenje: testiranje ove grafičke kartice može blokirati vaš računar" - -#: ../../any.pm:1 -#, c-format -msgid "" -"The user name must contain only lower cased letters, numbers, `-' and `_'" -msgstr "Korisničko ime može sadržati samo mala slova, brojeve, `-' i `_'" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Menudrake" -msgstr "Menudrake" - -#: ../../security/level.pm:1 -#, c-format -msgid "Welcome To Crackers" -msgstr "Dobrošli kod Krakera" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Module options:" -msgstr "Opcije modula:" - -#: ../advertising/11-mnf.pl:1 -#, c-format -msgid "Secure your networks with the Multi Network Firewall" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Go on without configuring the network" -msgstr "Nastavi dalje bez podešavanja mreže" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Abort" -msgstr "Prekini" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No password prompt on %s at port %s" -msgstr "Bez traženja lozinke na %s za port %s" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Kensington Thinking Mouse with Wheel emulation" -msgstr "Kensington Thinking Mouse" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Usage of remote scanners" -msgstr "Korišćenje udaljenih skenera" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Your Windows partition is too fragmented. Please reboot your computer under " -"Windows, run the ``defrag'' utility, then restart the Mandrake Linux " -"installation." -msgstr "" -"Vaša Windows particija je previše fragmentirana, prvo pokrenite ``defrag''" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (Norwegian)" -msgstr "Dvorak (Norveški)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hard Disk Backup Progress..." -msgstr "Napredak Backup-ovanja hard diska..." - -#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 -#, c-format -msgid "Unable to fork: %s" -msgstr "Ne mogu da forkujem: %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Type: " -msgstr "Unesi: " - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Edit Client" -msgstr "Uredi Klijenta" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "no fonts found" -msgstr "fontovi nisu pronađeni" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Mouse" -msgstr "Miš" - -#: ../../bootloader.pm:1 -#, c-format -msgid "not enough room in /boot" -msgstr "nema dovoljno mesta u /boot" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "trying to promote %s" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Liechtenstein" -msgstr "Lihtenštajn" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Host name" -msgstr "Ime hosta:" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the color of the progress bar" -msgstr "boja trake sa prikazom napretka" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Suppress Fonts Files" -msgstr "Zažmi Font fajlove" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Add to RAID" -msgstr "Dodaj na RAID" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"You can add additional entries in yaboot for other operating systems,\n" -"alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OSs, the entry consists only of a label and the \"root\"\n" -"partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is the name you will have to type at the yaboot prompt to\n" -"select this boot option.\n" -"\n" -" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" -"variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or ``/'' for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is often used to\n" -"assist in initializing video hardware, or to enable keyboard mouse button\n" -"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" -"The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" -"need to allocate a large ramdisk, this option can be used to specify a\n" -"ramdisk larger than the default.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially mounted as\n" -"read-only, to allow a file system check before the system becomes ``live''.\n" -"You can override the default with this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in ``novideo'' mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" -"highlighted with a ``*'' if you press [Tab] to see the boot selections." -msgstr "" -"Možete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n" -"alternativne kernele, ili za emergency boot image.\n" -"\n" -"Za druge OS-ove - unos sadrži samo oznaku i \"root\" particiju.\n" -"\n" -"Za Linux, postoji nekoliko mogućnosti: \n" -"\n" -" * Oznaka: Ovo je jednostavno ime koje ćete ukucati pri yaboot promptu da " -"bi \n" -"izabrali ovu \n" -"startnu opciju.\n" -"\n" -" * Image: Ovo je ime kernela koji se startuje. Obično vmlinux ili \n" -"varijacija vmlinux sa ekstenzijom.\n" -"\n" -" * Root: \"root\" uređaj ili \"/\" za vašu Linux instalaciju.\n" -"\n" -" \n" -" * Dodatak: Na Apple hardveru, kernelova opcija se koristi za prilično " -"često \n" -"da\n" -"asistira inicijalizaciju video hardvera, ili da omogući emulaciju tastera " -"za \n" -"miš na tastaturi zbog \n" -"čestog nedostatka drugog i trećeg tastera na Apple miševima. Sledi par \n" -"primera:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: Ova opcija se može koristiti ili za podizanje inicijalnih " -"modula,\n" -"pre nego je boot \n" -"uređaj dostupan, ili za podizanje ramdisk image za startanje u hitnim " -"situacijama.\n" -"\n" -" * Initrd-veličina: veličina default ramdisk je generalno 4096 bajta. \n" -"Ukoliko vam treba\n" -"alociranje velikog ramdisk-a, ova opcija može biti korisna.\n" -"\n" -" - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-\n" -"only, da bi omogućila\n" -"proveru datotečnog sistema pre nego sistem postane \"aktivan\". Ovde " -"možete \n" -"poništiti ovu opciju.\n" -"\n" -" * NoVideo: Ukoliko se Apple video hardver pokaže veoma problematičnim, \n" -"možete\n" -"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom \n" -"framebuffer podrškom.\n" -"\n" -" * Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n" -"pritisnete ENTER pri yaboot promptu. Ovaj unos će takođe biti dodatno \n" -"označen sa \"*\", ukolik pritisnete [Tab] da bi videli startnu selekciju." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." -msgstr "Štampač \"%s\" je uspešno dodan u Star Office/OpenOffice.org/GIMP" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No floppy drive available!" -msgstr "Disketa nije pronađena!" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"To know about the options available for the current printer read either the " -"list shown below or click on the \"Print option list\" button.%s%s%s\n" -"\n" -msgstr "" -"Da bi znali koje su vam opcije dostupne za tekući štampač pročitajte listu " -"koja je dole prikazana ili kliknite na taster \"Listu opcija za štampanje\".%" -"s%s\n" -"\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Saudi Arabia" -msgstr "Saudijska Arabija" - -#: ../../services.pm:1 -#, c-format -msgid "Internet" -msgstr "Internet" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Continue anyway?" -msgstr "Svejedno nastaviti ?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"If your printer is not listed, choose a compatible (see printer manual) or a " -"similar one." -msgstr "" -"Ukoliko se vaš štampač ne nalazi na listi, izaberite kompatibilni " -"(pogledajte upustvo za štampač) ili sličan njemu." - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer" -msgstr "Štampač" - -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Some devices were added:\n" -msgstr "Neki uređaji su dodani:\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Geometry: %s cylinders, %s heads, %s sectors\n" -msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing on the printer \"%s\"" -msgstr "Štampam na štampaču \"%s\"" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" -msgstr "/etc/hosts.allow i /etc/hosts.deny je već podešen - nije izmenjen" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Tape" -msgstr "Obnovi sa trake" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "" -"To submit a bug report, click the report button, which will open your " -"default browser\n" -"to Anthill where you will be able to upload the above information as a bug " -"report." -msgstr "" -"Da bi prijavili bag, kliknite na taster prijava.\n" -"Ovo će otvoriti prozor web pretraživača sa adresom %s\n" -" gde će te pronaći formular koji treba da popunite.Informacija koja je gore " -"prokazana će biti \n" -"prebačena na taj server." - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the profile to configure" -msgstr "Izaberite profil za konfigurisanje" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Password minimum length and number of digits and upcase letters" -msgstr "" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Enter a Zeroconf host name without any dot if you don't\n" -"want to use the default host name." -msgstr "" -"\n" -"\n" -"Unesite Zeroconf host name bez tačaka osim ako ne želite\n" -"koristite default host name." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now from configuration file" -msgstr "Backup-uj sada iz konfiguracionog fajla" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points should contain only alphanumerical characters" -msgstr "Tačke montiranja treba da sadrže samo alfanumeričke karaktere" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Restarting printing system..." -msgstr "Restartujem sistem za štampanje ..." - -#: ../../../move/tree/mdk_totem:1 -#, c-format -msgid "You can only run with no CDROM support" -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "See hardware info" -msgstr "Pogledaj informacije o hardveru" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Day" -msgstr "Dan" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of boot partition" -msgstr "Prvi sektor startne particije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model" -msgstr "Proizođač i model štampača" - -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ - Print, Don't Queue" -msgstr "PDQ - Štampaj, nemoj da pamtiš" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTIONS]...\n" -"Mandrake Terminal Server Configurator\n" -"--enable : enable MTS\n" -"--disable : disable MTS\n" -"--start : start MTS\n" -"--stop : stop MTS\n" -"--adduser : add an existing system user to MTS (requires username)\n" -"--deluser : delete an existing system user from MTS (requires " -"username)\n" -"--addclient : add a client machine to MTS (requires MAC address, IP, " -"nbi image name)\n" -"--delclient : delete a client machine from MTS (requires MAC address, " -"IP, nbi image name)" -msgstr "" -"[OPTIONS]...\n" -"Program za podešavanje Mandrake Terminalnog Servera\n" -"--enable : uključuje MTS\n" -"--disable : isključuje MTS\n" -"--start : pokreće MTS\n" -"--stop : zaustavlja MTS\n" -"--adduser : dodaje postojećeg sistemskog korisnika u MTS (zahteva " -"korisničko ime)\n" -"--deluser : briše postojećeg sistemskog korisnika iz MTS (zahteva " -"korisničko ime)\n" -"--addclient : dodaje klijentsku mašinu na MTS (zahteva MAC adresu, IP, " -"nbi image ime)\n" -"--delclient : briše klijentsku mašinu iz MTS (zahteva MAC adresu, IP, " -"nbi image ime)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet Mask:" -msgstr "Subnet maska:" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Set password expiration and account inactivation delays" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"_: load here is a noun, the load of the system\n" -"Load" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "" -"The two critical parameters are the vertical refresh rate, which is the " -"rate\n" -"at which the whole screen is refreshed, and most importantly the horizontal\n" -"sync rate, which is the rate at which scanlines are displayed.\n" -"\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a sync " -"range\n" -"that is beyond the capabilities of your monitor: you may damage your " -"monitor.\n" -" If in doubt, choose a conservative setting." -msgstr "" -"Morate da navedete horizontalni sinhronizacioni opseg vašeg monitora.\n" -"Možete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n" -"industrijskim standardima monitora, ili da navedete određeni opseg.\n" -"\n" -"VEOMA JE VAŽNO da ne navedete tip monitora koji ima ovaj opseg veći nego\n" -"što ga ima vaš monitor. Ako niste sigurni, odaberite manje vrednosti." - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, c-format -msgid "Modify" -msgstr "Promeni" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" and \"%s\" commands also allow to modify the option settings for " -"a particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\".\n" -msgstr "" -"\n" -"Komande \"%s\" i \"%s\" takođe omogućavaju izmenu opcija za konkretni posao " -"štampanja. Jednostavno dodajte željene opcije u komandnu liniju, e. g. \"%s " -"<fajl>\".\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Need hostname, username and password!" -msgstr "Potrebno je ime hosta, korisničko ime i lozinka!" - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "Insert floppy" -msgstr "Ubacite disketu u uređaj %s" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "" -"WebDAV is a protocol that allows you to mount a web server's directory\n" -"locally, and treat it like a local filesystem (provided the web server is\n" -"configured as a WebDAV server). If you would like to add WebDAV mount\n" -"points, select \"New\"." -msgstr "" -"WebDAV je protokol koji vam omogućava da montirate direktorijum veb servera\n" -"lokalno, i da ga tretirate kao lokalni fajl sistem (dostupni veb server je\n" -"podešen kao WebDAV server). Ukoliko želite da dodate novu WebDAV tačku\n" -"montiranja, izaberite \"Novi\"." - -#: ../../standalone/drakbug:1 -#, c-format -msgid "HardDrake" -msgstr "HardDrake" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "new" -msgstr "novi" - -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable syslog reports to console 12" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Would you like to try again?" -msgstr "Da li želite da probate ponovo?" - -#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Wizard" -msgstr "čarobnjak (pomoćnik)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Edit selected server" -msgstr "Uredi selektovani server" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose where you want to backup" -msgstr "Izaberite šta želite da backup-ujete" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You need to reboot for the partition table modifications to take place" -msgstr "Treba da resetujete mašinu za primenu izmena u tabeli particija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include the browser cache" -msgstr "Ne uključuj keš pretraživača" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Failed to check filesystem %s. Do you want to repair the errors? (beware, " -"you can lose data)" -msgstr "" -"Neuspešna prvera fajl sistema %s. Da li želite da popravite greške? (budite " -"pažljivi, možete izgubiti podatke)" - -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Please, choose your keyboard layout." -msgstr "Koji raspored tastature želite ?" - -#: ../../mouse.pm:1 ../../security/level.pm:1 -#, c-format -msgid "Standard" -msgstr "Standardni" - -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose your mouse type." -msgstr "Izaberite tip miša" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Connect..." -msgstr "Konektovanje..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to configure printer \"%s\"!" -msgstr "Neuspelo podešavanje štampača \"%s\"!" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "not configured" -msgstr "nije podešeno" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "ISA / PCMCIA" -msgstr "ISA / PCMCIA" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "About" -msgstr "O" - -#: ../../mouse.pm:1 -#, c-format -msgid "GlidePoint" -msgstr "GlidePoint" - -#: ../../network/network.pm:1 -#, c-format -msgid "Proxies configuration" -msgstr "Podešavanje proksija" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Start: sector %s\n" -msgstr "Početak: sektor %s\n" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "No Mask" -msgstr "Loš paket" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface already configured" -msgstr "Mrežni interfejs je već podeššen" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Couldn't access the floppy!" -msgstr "Ne mogu da pristupim disketi!" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Warning: Free Software may not necessarily be patent free, and some Free\n" -"Software included may be covered by patents in your country. For example, " -"the\n" -"MP3 decoders included may require a licence for further usage (see\n" -"http://www.mp3licensing.com for more details). If you are unsure if a " -"patent\n" -"may be applicable to you, check your local laws." -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Mail Server" -msgstr "Server za el.poštu" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please click on a partition" -msgstr "Kliknite na particiju" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on HP JetDirect" -msgstr ", multi-fuunkcionalni uređaj na HP JetDirect" - -#: ../../any.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Linux" -msgstr "Linux" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Have a nice day!" -msgstr "Želimo vam prijatan dan!" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/fd0" -msgstr "/dev/fd0" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Upgrade %s" -msgstr "Ažuriranje %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Connection" -msgstr "Izbor povezanosti štampača" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels in progress ..." -msgstr "Skeniranje TV kanala u toku ..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Error during sending file via FTP.\n" -" Please correct your FTP configuration." -msgstr "" -"Greška tokom slanja fajla preko FTP-a.\n" -" Ispravite vašu FTP konfiguraciju." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "IP Range Start:" -msgstr "Početak IP raspona:" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The internet superserver daemon (commonly called inetd) starts a\n" -"variety of other internet services as needed. It is responsible for " -"starting\n" -"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " -"disables\n" -"all of the services it is responsible for." -msgstr "" -"Interent super server demon (znan kao netd) starta \n" -"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. " -"elnet, ftp, rsh, i rlogin.Isključujući njega, isključujete i servise \n" -"za koje je on odgovoran." - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the height of the progress bar" -msgstr "visina trake sa prikazom napretka" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save via %s on host: %s\n" -msgstr "" -"\n" -"- Snimi preko %s na host: %s\n" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Argentina" -msgstr "Argentina" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Domain Name Server" -msgstr "Domain Name Server" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Level:" -msgstr "Nivo sigurnosti:" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points must begin with a leading /" -msgstr "Tačke montiranja moraju da počinju sa vodećim /" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Choose your CD/DVD device" -msgstr "Izaberite veličinu vašeg CD/DVD medija (Mb)" - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "CUPS server" -msgstr "DNS server" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Postfix Mail Server" -msgstr "Postfix mail server" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without saving" -msgstr "Kraj bez snimanja promena" - -#: ../../lang.pm:1 -#, c-format -msgid "Yemen" -msgstr "Jemen" - -#: ../advertising/11-mnf.pl:1 -#, c-format -msgid "This product is available on the MandrakeStore Web site." -msgstr "Ovaj proidzvod je dostupan na MandrakeStore veb sajtu" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "=> There are many things to choose from (%s).\n" -msgstr "=> Postoji mnogo stvari za izbor iz (%s).\n" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "GMT - DrakClock" -msgstr "" - -#: ../../../move/move.pm:1 -#, c-format -msgid "" -"An error occurred:\n" -"\n" -"\n" -"%s\n" -"\n" -"This may come from corrupted system configuration files\n" -"on the USB key, in this case removing them and then\n" -"rebooting Mandrake Move would fix the problem. To do\n" -"so, click on the corresponding button.\n" -"\n" -"\n" -"You may also want to reboot and remove the USB key, or\n" -"examine its contents under another OS, or even have\n" -"a look at log files in console #3 and #4 to try to\n" -"guess what's happening." -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Hard drive detection" -msgstr "Detekcija hard diska" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You haven't selected any group of packages.\n" -"Please choose the minimal installation you want:" -msgstr "" -"Niste selektovali nijednu grupu paketa.\n" -"Izaberite minimalnu instalaciju koju želite:" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"You need the Alcatel microcode.\n" -"You can provide it now via a floppy or your windows partition,\n" -"or skip and do it later." -msgstr "" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Please enter the WebDAV server URL" -msgstr "Unesite URL WebDAV servera" - -#: ../../lang.pm:1 -#, c-format -msgid "Tajikistan" -msgstr "Tadžikistan" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Accept" -msgstr "Prihvati" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Description" -msgstr "Opis" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Please enter summary text." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Error opening %s for writing: %s" -msgstr "Greška pri otvaranju %s za ispis: %s" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Mouse type: %s\n" -msgstr "Tip miša: %s\n" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Your card can have 3D hardware acceleration support with XFree %s." -msgstr "Vaša kartica može imati 3D hardversku akceleraciju sa XFree %s." - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Choose a monitor" -msgstr "Izaberite monitor" - -#: ../../any.pm:1 -#, c-format -msgid "Empty label not allowed" -msgstr "Prazna oznaka nije dozvoljena" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (UK)" -msgstr "Malteški (UK)" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "I can't add any more partition" -msgstr "Ne mogu dodati više ni jednu particiju" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size in MB: " -msgstr "Veličina u MB:" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Remote printer" -msgstr "Udaljeni štampač" - -#: ../../any.pm:1 -#, c-format -msgid "Please choose a language to use." -msgstr "Izaberite koji jezik želite da korisitite." - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"WARNING: this device has been previously configured to connect to the " -"Internet.\n" -"Simply accept to keep this device configured.\n" -"Modifying the fields below will override this configuration." -msgstr "" -"Upozorenje: Ovaj uređaj je već prethodno konfigurisan za konektovanje na " -"Internet.\n" -"Samo prihvaitite da bi postavku ostavili istom.\n" -"Izmena polja koje vidite će poništiti postojeću konfiguraciju." - -#: ../../any.pm:1 -#, c-format -msgid "I can set up your computer to automatically log on one user." -msgstr "Ja mogu podesti vaš računar da automatski uloguje jednog korisnika." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Floppy format" -msgstr "Format diskete" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Generic Printers" -msgstr "Generic Štampači" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the printer to which the print jobs should go or enter a " -"device name/file name in the input line" -msgstr "" -"Izaberite štampač na koji želite da šaljete dokumente za štampanje ili " -"unesite ime/ime fajla uređaja u liniju za unos" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The scanners on this machine are available to other computers" -msgstr "Skeneri na ovoj mašini su dostupni za ostale računare" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of the root partition" -msgstr "Prvi sektor root particije" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Alternative drivers" -msgstr "Alternativni drajveri" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Please check all options that you need.\n" -msgstr "" -"\n" -"Proverite sve opcije koje vam trebaju.\n" - -#: ../../any.pm:1 -#, c-format -msgid "Initrd" -msgstr "Initrd" - -#: ../../lang.pm:1 -#, c-format -msgid "Cape Verde" -msgstr "Kape Verde" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "whether this cpu has the Cyrix 6x86 Coma bug" -msgstr "Da li ovaj procesor ima Cyrix 6x86 Coma bag" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Loading printer configuration... Please wait" -msgstr "Izmena konfiguracije štampača" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" -msgstr "" -"Prvi pentium procesori su bili bagoviti i blokirali su rad pri ddekodiranju " -"F00F bytecode" - -#: ../../lang.pm:1 -#, c-format -msgid "Guam" -msgstr "Guam" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the port that your printer is connected to or enter a device " -"name/file name in the input line" -msgstr "" -"Izaberite port na koji je vaš štampač povezan ili unesite ime/ime fajla " -"uređaja u liniju za unos" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Options/Test" -msgstr "/Opcije/Test" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"This level is to be used with care. It makes your system more easy to use,\n" -"but very sensitive. It must not be used for a machine connected to others\n" -"or to the Internet. There is no password access." -msgstr "" -"Na ovom nivou treba obratiti pažnju. On pravi vaš sistem lakšim\n" -"za upotrebu, ali i veoma osetljivim: ne sme biti korišten na mašini\n" -"koja je povezana sa drugim mašinama ili na internet. Ovde ne postoji\n" -"pristup sa lozinkom." - -#: ../../fs.pm:1 -#, c-format -msgid "Mounting partition %s" -msgstr "Montiram particiju %s" - -#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "User name" -msgstr "Korisničko ime" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Userdrake" -msgstr "Userdrake" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to use for Linux4Win?" -msgstr "Koju particiju želite da korisite za Linux4Win?" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "due to missing %s" -msgstr "nedostaje kdesu" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Test pages" -msgstr "Testiranje stranica" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Logical volume name " -msgstr "Lokalna mera" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"List of data to restore:\n" -"\n" -msgstr "" -"Lista podataka za obnavljanje:\n" -"\n" - -#: ../../fs.pm:1 -#, c-format -msgid "Checking %s" -msgstr "Proveravam %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "TCP/Socket Printer Options" -msgstr "TCP/Socket Opcije Štampača" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card mem (DMA)" -msgstr "(DMA) kartice" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnecting from Internet " -msgstr "Diskonektovanje sa Interneta" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "France" -msgstr "Francuska" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "browse" -msgstr "pretraži" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking installed software..." -msgstr "Proveravam instalirani softver..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name missing!" -msgstr "Nedostaje ime udaljenog štampača!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you want to enable printing on printers in the local network?\n" -msgstr "Da li želite da omogućite šrampanje na štampačima u lokalnoj mreži?\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Turkey" -msgstr "Turska" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Alcatel speedtouch usb" -msgstr "Alcatel speedtouch usb" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Number of buttons" -msgstr "Broj tastera" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Vietnamese \"numeric row\" QWERTY" -msgstr "Vijetnamski \"number row\"QWERTY" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Module" -msgstr "Modul" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"In addition, queues not created with this program or \"foomatic-configure\" " -"cannot be transferred." -msgstr "" -"Kao dodatak, queues koji su kreirani sa ovim programom ili \"foomatic-" -"configure\" ne mogu biti prebačeni." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Hardware" -msgstr "Hardver" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Ctrl and Alt keys simultaneously" -msgstr "Ctrl i Alt tasteri istovremeno" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "United States" -msgstr "SAD" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "User umask" -msgstr "Korisnici" - -#: ../../any.pm:1 -#, c-format -msgid "Default OS?" -msgstr "Podrazumevani OS ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (German layout)" -msgstr "Švajcarski (Nemački raspored)" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure all heads independently" -msgstr "Podesi sve glave nezavisno" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the printer you want to set up. The configuration of the " -"printer will work fully automatically. If your printer was not correctly " -"detected or if you prefer a customized printer configuration, turn on " -"\"Manual configuration\"." -msgstr "" -"Izaberite štampač koji želite da podesite. Podešavanje štampača će biti " -"potpuno automatsko. Ukoliko va štampač nije pravilno detektovan ili više " -"želite da ga sami podesite, uključite \"Ručna konfiguracija\"." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "NTP Server" -msgstr "NTP Server" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Sulogin(8) in single user level" -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Omogući/Onemogući sulogin(8) u single user nivou." - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Load/Save on floppy" -msgstr "Učitaj/Snimi na disketu" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "This theme does not yet have a bootsplash in %s !" -msgstr "Ova tema nema nijedan bootsplash u %s !" - -#: ../../pkgs.pm:1 -#, c-format -msgid "nice" -msgstr "lepo" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Leaving in %d seconds" -msgstr "Izlazim za %d sekundi" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Please choose which serial port your modem is connected to." -msgstr "Izaberite serijski port na koji je modem povezan." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Property" -msgstr "Svojstvo" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Ghostscript" -msgstr "Ghostscript" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN Configuration" -msgstr "LAN konfiguracija" - -#: ../../lang.pm:1 -#, c-format -msgid "Ghana" -msgstr "Gana" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Path or Module required" -msgstr "Potrebna je putanja ili modul" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Advanced Options" -msgstr "Napredne opcije" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "View Configuration" -msgstr "Konfiguracija" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Coma bug" -msgstr "Coma bug" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, you need to choose which partition(s) will be used for the\n" -"installation of your Mandrake Linux system. If partitions have already been\n" -"defined, either from a previous installation of GNU/Linux or by another\n" -"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" -"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"%s\": this option deletes all partitions on the selected hard drive\n" -"\n" -" * \"%s\": this option enables you to automatically create ext3 and swap\n" -"partitions in the free space of your hard drive\n" -"\n" -"\"%s\": gives access to additional features:\n" -"\n" -" * \"%s\": saves the partition table to a floppy. Useful for later\n" -"partition-table recovery if necessary. It is strongly recommended that you\n" -"perform this step.\n" -"\n" -" * \"%s\": allows you to restore a previously saved partition table from a\n" -"floppy disk.\n" -"\n" -" * \"%s\": if your partition table is damaged, you can try to recover it\n" -"using this option. Please be careful and remember that it doesn't always\n" -"work.\n" -"\n" -" * \"%s\": discards all changes and reloads the partition table that was\n" -"originally on the hard drive.\n" -"\n" -" * \"%s\": unchecking this option will force users to manually mount and\n" -"unmount removable media such as floppies and CD-ROMs.\n" -"\n" -" * \"%s\": use this option if you wish to use a wizard to partition your\n" -"hard drive. This is recommended if you do not have a good understanding of\n" -"partitioning.\n" -"\n" -" * \"%s\": use this option to cancel your changes.\n" -"\n" -" * \"%s\": allows additional actions on partitions (type, options, format)\n" -"and gives more information about the hard drive.\n" -"\n" -" * \"%s\": when you are finished partitioning your hard drive, this will\n" -"save your changes back to disk.\n" -"\n" -"When defining the size of a partition, you can finely set the partition\n" -"size by using the Arrow keys of your keyboard.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and the [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected)\n" -"\n" -" * Ctrl-d to delete a partition\n" -"\n" -" * Ctrl-m to set the mount point\n" -"\n" -"To get information about the different file system types available, please\n" -"read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." -msgstr "" -"Na ovoj tački, morate izbrati koju particiju(e) želite da koristite za\n" -"instalaciju novog Mandrake Linux sistema. Ukoliko su particije\n" -"već definisane (od predhodne instalacije ili od strane\n" -"drugog alata za particije), možete da koristite postojeće particije.\n" -"U drugim slučajevima,\n" -"hard disk particije moraju biti definisane.\n" -"\n" -"Da bi kreirali particije, morate prvo izabrati hard disk. Možete izabrati\n" -"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n" -"za drugi ili \"sda\" za prvi SCSI disk itd.\n" -"\n" -"Za particioniranje selektovanog hard diska, možete koristiti sledeće " -"opcije:\n" -"\n" -" * \"Očisti sve\": ova opcija briše sve particije na izabranom hard \n" -"disku.\n" -"\n" -" * \"Auto alociranje\": ova opcija dozvoljava da automatski kreirate Ext2 " -"i \n" -"swap particije na slobodnom prostoru \n" -" hard diska.\n" -"\n" -"\"Još\": daje pristup dodatnim opcijama:\n" -"\n" -" * \"Spasi tabelu particija\": ukoliko je vaša tabela particija " -"oštećena, \n" -"možete da probate da je oporavite koristeći ovu opciju. Budite\n" -" pažljivi i znajte da može da i ne uspe.\n" -"\n" -" * \"Vrati na staro\": ova opcija će poništiti izmenu.\n" -"\n" -" * \"Ponovno učitavanje\": ovu opciju možete koristiti ukoliko želite da \n" -"poništitisve promene i učitate inicijalnu tabelu particija\n" -"\n" -" * \"Čarobnjak\": ukoliko želite da koristite čarobnjaka za " -"particioniranje \n" -"hard diska, izaberite ovu opciju. Preporučena je ukoiko\n" -" nemate mnogo znanja o partcijama.\n" -"\n" -" * \"Povrati sa diskete\": ukoliko ste snimili tabelu particija na \n" -"disketu tokom prethodne instalacije, možete je\n" -" vratiti sa ovom opcijom.\n" -"\n" -" * \"Snimi na disketu\": ukoliko želite da da snimite tabelu particija na\n" -"disketu da bi mogli kasnije da je povratite, možete da iskoristite\n" -" ovu opciju. Naročito preporučujemo ovu opciju\n" -"\n" -" * \"Urađeno\": kada završite sa particioniranjem hard diska, iskoristite " -"ovu opciju da bi snimili promene.\n" -"\n" -"Kada definišete veličinu particija, možete konačno podesiti veličinu\n" -"particija pomoću tastera sa strelicama na vašoj strelicama\n" -"Za više informacija, možete za svaku ocpiju dobiti kretanjem pomoću " -"tastature: navigacijom kroz particije pomoću [Tab] tastera i [Up/Down] " -"strelica.\n" -"\n" -"Kada je particija izabrana, možete koristiti:\n" -"\n" -" * Ctrl-c za kreiranje nove particije (kada je izabrana prazna particija);\n" -"\n" -" * Ctrl-d za brisanje particije;\n" -"\n" -" * Ctrl-m za postavljanje tačke montiranja.\n" -"\n" -"Da bi dobili informacije o različitim dostupnim tipovima sistema, " -"pročitajte\n" -"ext2FS poglavlje iz ``Upustva''.\n" -"\n" -"Ukoliko radite instalaciju na PPC Mašinu, možda ćete želeti da kreirate " -"malu\n" -"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n" -"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo većom,\n" -"na primer 50MB, možete iskoristiti taj prostor za smeštanje\n" -"rezervnog kernela i ramdisk image za startanje u hitnim situacijama." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." -msgstr "" -"Grafička kartica\n" -"\n" -" Program za instalaciju obično automatski detektuje i podešava\n" -"grafičku kartu koja je instalirana u vašoj mašini. Ukoliko to nije slučaj, " -"možete\n" -"da je izaberete sami sa liste ponuđenih kartica.\n" -"\n" -" U slučaju da je više grafičkih servera dostupno za vašu karticu, sa ili\n" -"bez 3D akceleracije, onda sami odaberite onu koja najbolje odgovara\n" -"vašim potrebama." - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error installing packages:" -msgstr "Greška pri instalaciji paketa:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Lexmark inkjet configuration" -msgstr "Konfiguracija Lexmark inkjet štampača" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Undo" -msgstr "Poništi radnju" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Save partition table" -msgstr "Sačuvaj tabelu particija" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Finnish" -msgstr "Finski" - -#: ../../lang.pm:1 -#, c-format -msgid "Macedonia" -msgstr "Makedonija" - -#: ../../any.pm:1 -#, c-format -msgid "" -"The per-user sharing uses the group \"fileshare\". \n" -"You can use userdrake to add a user to this group." -msgstr "" -"per-user deljenje resursa koristi grupu \"fileshare\". \n" -"Vi pomoću userdrake-a možete dodati korisnika u ovu grupu." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovenian" -msgstr "Slovenački" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Authorize:\n" -"\n" -"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " -"set to \"ALL\",\n" -"\n" -"- only local ones if set to \"LOCAL\"\n" -"\n" -"- none if set to \"NONE\".\n" -"\n" -"To authorize the services you need, use /etc/hosts.allow (see hosts.allow" -"(5))." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Autorizuje sve servise koje kontroliše tcp_wrappers (see hosts.deny(5)) ako " -"je \\fIarg\\fP = ALL. Samo lokalni\n" -"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. Za autorizaciju vama " -"potrebnih servisa , koristite /etc/hosts.allow\n" -"(see hosts.allow(5))." - -#: ../../lang.pm:1 -#, c-format -msgid "Libya" -msgstr "Libija" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Configuring scripts, installing software, starting servers..." -msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer on parallel port #%s" -msgstr "Štampač na paralelnom portu #%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Burn to CD" -msgstr "" -"\n" -"- Nareži na CD" - -#: ../../any.pm:1 -#, c-format -msgid "Table" -msgstr "Tabela" - -#: ../../fs.pm:1 -#, c-format -msgid "I don't know how to format %s in type %s" -msgstr "ne znam kako da formatiram %s u tipu %s" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Model" -msgstr "Model" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "USB printer #%s" -msgstr "USB štampač #%s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Stop Server" -msgstr "Zaustavi Server" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"\n" -"Select the theme for\n" -"lilo and bootsplash,\n" -"you can choose\n" -"them separately" -msgstr "" -"\n" -"Izaberite temu za\n" -"lilo i bootsplash,\n" -"a možete ih odabrati\n" -"odvojeno" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Modem" -msgstr "Modem" - -#: ../../lang.pm:1 -#, c-format -msgid "Tuvalu" -msgstr "Tuvalu" - -#: ../../help.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Use auto detection" -msgstr "Koristi auto detekciju" - -#: ../../services.pm:1 -#, c-format -msgid "" -"GPM adds mouse support to text-based Linux applications such the\n" -"Midnight Commander. It also allows mouse-based console cut-and-paste " -"operations,\n" -"and includes support for pop-up menus on the console." -msgstr "" -"GPM daje podršku za miša za teksulano-bazirane aplikacije kao što je\n" -"Midnight Commander.Isto tako daje podršku za pop-up menije na konzoli." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Started on boot" -msgstr "Pokrenuto pri startanju" - -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "" -"Join the MandrakeSoft support teams and the Linux Community online to share " -"your knowledge and help others by becoming a recognized Expert on the online " -"technical support website:" -msgstr "" -"Priključite se MandrakeSofttimovima za podršku i Linux zajednici online da " -"bi podelili svoje znanje i pomogli drugima tako što ćete postati priznati " -"Ekspert na online veb sajtu za tehničku podršku:" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "No password aging for" -msgstr "Bez lozinke" - -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"The following options can be set to customize your\n" -"system security. If you need an explanation, look at the help tooltip.\n" -msgstr "" -"Sledeće opcije se mogu postaviti da podese vaš\n" -"sigurnosni sistem. Ukoliko vam treba objašnjenje, kliknite na pomoć.\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Automatically find available printers on remote machines" -msgstr "Automatski pronađi dostupne štampače na udaljenim mašinama" - -#: ../../lang.pm:1 -#, c-format -msgid "East Timor" -msgstr "Istočni Timor" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Tape Device" -msgstr "na uređaju za trake" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save to Tape on device: %s" -msgstr "" -"\n" -"- Snimi na traku na uređaju: %s" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Login name" -msgstr "Ime domena" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Report unowned files" -msgstr "ukoliko je podešeno na da, prijavite fajlove bez vlasnika." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Del profile..." -msgstr "Ukloni profil..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing Foomatic..." -msgstr "Instaliram Foomatic ..." - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "Please log out and then use Ctrl-Alt-BackSpace" -msgstr "Molim vaš izlogujte se i restartujte (Ctrl-Alt-BackSpace) računar" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "detected" -msgstr "detektovano" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "The network needs to be restarted. Do you want to restart it ?" -msgstr "Mreža mora da se restartuje. Da li želite da je restartujete ?" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Package: " -msgstr "Paket: " - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't write /etc/sysconfig/bootsplash." -msgstr "Ne mogu da upisujem u /etc/sysconfig/bootsplash." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SECURITY WARNING!" -msgstr "SIGURNOSNO UPOZORENJE!" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "StarOffice" -msgstr "StarOffice" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "No, I don't want autologin" -msgstr "Ne, ja ne želim autologovanje" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Windows Migration tool" -msgstr "Alat za prelazak za Windows-a" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "All languages" -msgstr "Svi jezici" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removing %s" -msgstr "Uklanjanje: %s" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "%s not found...\n" -msgstr "%s ne odgovara" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Testing your connection..." -msgstr "Testiranje konekcije..." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cache size" -msgstr "Veličina keša" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"Passwords are now enabled, but use as a networked computer is still not " -"recommended." -msgstr "" -"Lozinke su sada omogućene, ali se i dalje ne preporučuje da se koristi\n" -"kao mrežni računar." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Start sector: " -msgstr "Početni sektor: " - -#: ../../lang.pm:1 -#, c-format -msgid "Congo (Brazzaville)" -msgstr "Kongo (Brazavil)" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Read" -msgstr "Samo-čitanje" - -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "The package %s needs to be installed. Do you want to install it?" -msgstr "Paket %s mora biti instaliran. Da li želite da ga instalirate?" - -#: ../../lang.pm:1 -#, c-format -msgid "Seychelles" -msgstr "Sejšeli" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printerdrake has compared the model name resulting from the printer auto-" -"detection with the models listed in its printer database to find the best " -"match. This choice can be wrong, especially when your printer is not listed " -"at all in the database. So check whether the choice is correct and click " -"\"The model is correct\" if so and if not, click \"Select model manually\" " -"so that you can choose your printer model manually on the next screen.\n" -"\n" -"For your printer Printerdrake has found:\n" -"\n" -"%s" -msgstr "" -"Printerdrake je upoređivao ime modela dobijenog autodetekcijomsa modelima " -"prikazanim u njegovoj bazi podataka da bi pronašao odgovarajući. Ovaj izbor " -"može biti pogrešan, posebno kada se vaš štampač uopštene nalazi u bazi " -"podataka. Zato proverite da je izbor ispravan i kliknite \"Ovaj model je " -"ispravan\" ukoliko jeste a ukoliko nije, kliknite \"Ručno izaberite model\" " -"da bi mogli da sami izaberete štampač na sledećem ekranu.\n" -"\n" -"Za vaš štampač Printerdrake je pronašao:\n" -"\n" -"%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Bad password on %s" -msgstr "Pogrešna lodzinka na %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"There is one unknown printer directly connected to your system" -msgstr "" -"\n" -"Postoji jedan nepoznati štamač koje je direktno povezan an vaš sistem" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Right Control key" -msgstr "Desni Alt taster" - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "" -"Insert a FAT formatted floppy in drive %s with %s in root directory and " -"press %s" -msgstr "Ubacite FAT formatiranu praznu disketu u uređaj %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Zambia" -msgstr "Zambija" - -#: ../../security/level.pm:1 -#, c-format -msgid "Security Administrator (login or email)" -msgstr "Administracija Nivoa Sigurnosti (login ili email)" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Sorry, we support only 2.4 kernels." -msgstr "Žalim, ali podržani su samo 2.4 kerneli." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwerty)" -msgstr "Rumunski (qwerty)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Under Devel ... please wait." -msgstr "U razvoju ... molim Vas sačekajte" - -#: ../../lang.pm:1 -#, c-format -msgid "Egypt" -msgstr "Egipat" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Czech Republic" -msgstr "Češka" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Sound card" -msgstr "Zvučna kartica" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Import Fonts" -msgstr "Uvoz fontova" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "" -"You have one big MicroSoft Windows partition.\n" -"I suggest you first resize that partition\n" -"(click on it, then click on \"Resize\")" -msgstr "" -"Vi imate jednu veliku MicroSoft Windows particiju.\n" -"Predlažem da prvo izmenite veličnu (resize) te particije (kliknite na nju,\n" -"a potom na \"Promeni veličinu\")" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Suppress Temporary Files" -msgstr "Sažmi temp fajlove" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "" -"Congratulations, the network and Internet configuration is finished.\n" -"\n" -msgstr "" -"čestitamo, mrežna i internet konfiguracija je završena.\n" -"\n" -"Konfiguracija se sada može primeniti na sistem.\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Change partition type" -msgstr "Promena tipa particije" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor." -msgstr "" -"Rezolucija\n" -"\n" -" Ovde možete izabrati rezoluciju i broj boja koje su\n" -"dostupne za vaš hardver. Izaberite ono što najviše odgovara vašim potrebama " -"(ove opcije ćete moći\n" -"da promenite i nakon instalacije). Primer izabrane\n" -"konfiguracije je prikazan na monitoru." - -#: ../../standalone/draksec:1 -#, c-format -msgid "Network Options" -msgstr "Mrežne opcije" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Enable msec hourly security check" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući msec proveru sigurnosti na svaki čas." - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Display theme\n" -"under console" -msgstr "" -"Prikaži teme\n" -"u konzoli" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on %s)" -msgstr "(na %s)" - -#: ../../mouse.pm:1 -#, c-format -msgid "MM Series" -msgstr "MM serija" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"A library which defends against buffer overflow and format string attacks." -msgstr "Biblioteka koja štiti od buffer overflow-a i format string napada." - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "average" -msgstr "prosek" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "New printer name" -msgstr "Novo ime štampača" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Allow an ordinary user to mount the file system. The\n" -"name of the mounting user is written to mtab so that he can unmount the " -"file\n" -"system again. This option implies the options noexec, nosuid, and nodev\n" -"(unless overridden by subsequent options, as in the option line\n" -"user,exec,dev,suid )." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Equatorial Guinea" -msgstr "Ekvatorijalna Gvineja" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup System" -msgstr "Backup-uj sistem" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Build Backup" -msgstr "Kreiraj backup" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\" or \"%s <file>\".\n" -msgstr "" -"Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu " -"\"%s <fajl>\" ili \"%s <fajl>\".\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Currently, no alternative possibility is available" -msgstr "Trenutno, ne postoji dtruga alternativa" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwertz)" -msgstr "Rumunski (qwertz)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Write Config" -msgstr "Sačuvaj Konfiguraciju" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The routed daemon allows for automatic IP router table updated via\n" -"the RIP protocol. While RIP is widely used on small networks, more complex\n" -"routing protocols are needed for complex networks." -msgstr "" -"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n" -"RIP protokola.Dok se RIP dosta korisiti na malim mrežama,kompleksniji \n" -" routing protokoli su potrebni za kompleksne mreže." - -#: ../../lang.pm:1 -#, c-format -msgid "Kiribati" -msgstr "Kiribati" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" -msgstr "Logitech mouse (serijski, stari C7 tip)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Other (not drakbackup) keys in place already" -msgstr "" -"Drugi (ne drakbackup)\n" -"tasteri su već na mestu" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" -"\n" -"You will be presented with a list of different parameters to change to get\n" -"an optimal graphical display: Graphic Card\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs.\n" -"\n" -"\n" -"\n" -"Monitor\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer.\n" -"\n" -"\n" -"\n" -"Resolution\n" -"\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor.\n" -"\n" -"\n" -"\n" -"Test\n" -"\n" -" the system will try to open a graphical screen at the desired\n" -"resolution. If you can see the message during the test and answer \"%s\",\n" -"then DrakX will proceed to the next step. If you cannot see the message, it\n" -"means that some part of the autodetected configuration was incorrect and\n" -"the test will automatically end after 12 seconds, bringing you back to the\n" -"menu. Change settings until you get a correct graphical display.\n" -"\n" -"\n" -"\n" -"Options\n" -"\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" -"X (ili X Window Sistem) je srce GNU/Linux grafičkog interfejsa\n" -"na koji se oslanjaju sva grafička okruženja (KDE, GNOME, AfterStep,\n" -"WindowMaker, itd.) koja se nalaze u Mandrake Linux-u.\n" -"\n" -"Biće vam prikazana lista sa različitim parametrima čijom izmenom\n" -"možete dobiti optimalan grafički prikaz: Grafička kartica\n" -"\n" -"\n" -" Program za instalaciju obično automatski detektuje i podešava\n" -"grafičku kartu koja se nalazi u vašem računu. Ukoliko to nije slučaj, " -"možete\n" -"sami da izaberete karticu sa liste.\n" -"\n" -" Ukoliko su različiti serveri dostupni za vašu karticu, sa ili\n" -"vez 3D akceleracije, onda treba da izaberete onaj koji najviše\n" -"odgovara vašim potrebama.\n" -"\n" -"\n" -"\n" -"Monitor\n" -"\n" -" Program za instalaciju obično automatski detektuje i podešava\n" -"monitor koji povezan sa vašim računarom. Ukoliko se to ne desi možete " -"izabrati\n" -"sami sa liste ponuđenih monitora\n" -"\n" -" Ovde možete izabrati rezoluciju i broj boja od\n" -"onih koje su ponuđene za vaš hardver. Izaberite ono što najviše odgovara " -"vašim potrebama\n" -"(ove opcije ćete moći izmeniti i nakon instalacije). Izabrana\n" -"konfiguracije se vidi na monitoru.\n" -"\n" -"\n" -"\n" -"Test\n" -"\n" -" sistem će pokušati da otvori grafički ekran u željenoj\n" -"rezoluciji. Ukoliko možete da vidite poruku tokom testa odgovorite sa \"Da" -"\",\n" -"i DrakX će nastaviti sa sledećim korakom. Ukoliko ne možete da vidite " -"poruku, to\n" -"znači da je neki deo autotedekcije bio nepravilan i\n" -"test će automatski završiti nakon 12 sekundi, otavarajući meni za\n" -"konfiguraciju. Izmenite opcije sve dok ne dobijete korektan grafički " -"prikaz.\n" -"\n" -"\n" -"\n" -"Opcije\n" -"\n" -" Ovde možete da izaberete da li želite da vaš račuanr automatski\n" -"pređe na grafički interfejs pri startanju. Očigledno, izabraćete\n" -"\"Ne\" ukoliko je vaša mašina server, ili ukoliko niste uspeli da uspešno \n" -"podesite grafički prikaz." - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Browse" -msgstr "pretraži" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "CDROM" -msgstr "CDROM" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Do you want to try to connect to the Internet now?" -msgstr "Da li hoćete da se konektujete na internet sada?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Belgian" -msgstr "Belgijski" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you have an ISA sound card?" -msgstr "Da li imate ISA zvučnu karticu?" - -#: ../../network/ethernet.pm:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system.\n" -"I cannot set up this connection type." -msgstr "" -"Nije detektovana nijedna mrežna kartica.\n" -"Ne mogu da podesim ovaj tip konekcije." - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Windows" -msgstr "Windows" - -#: ../../common.pm:1 -#, c-format -msgid "Can't make screenshots before partitioning" -msgstr "Ne mogu da napravim snimak pre particioniranja" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Name" -msgstr "Ime hosta" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/Save _As" -msgstr "/Datoteka/Snimi _Kao" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To get access to printers on remote CUPS servers in your local network you " -"only need to turn on the \"Automatically find available printers on remote " -"machines\" option; the CUPS servers inform your machine automatically about " -"their printers. All printers currently known to your machine are listed in " -"the \"Remote printers\" section in the main window of Printerdrake. If your " -"CUPS server(s) is/are not in your local network, you have to enter the IP " -"address(es) and optionally the port number(s) here to get the printer " -"information from the server(s)." -msgstr "" -"Da bi pristupili štampačima na udaljenim CUPS serverima u vašoj lokalnoj " -"mreži trebasamo da uključite opciju \"Automatski pronađi dostupne štampače " -"na udaljenim mašinama\"; CUPS serveri će izvestiti vašu mašinu o štampačima " -"automatski. Svi štampači koji su trenutno poznati vašoj mašini će biti " -"prikazani u sekciji \"Udaljeni štampači\" u glavnom prozoru Printerdrake. " -"Ukoliko vaš CUPS server(i) nije/nisu u vašoj lokalnoj mreži, morate uneti IP " -"aadresu(e) i opcionalno broj porta(ova)da bi dobavili informacije sa servera." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "%s is not in the scanner database, configure it manually?" -msgstr "" -"%s se ne nalazi u bazi podataka za skenere, da li želite da ga ručno " -"podesite?" - -#: ../../any.pm:1 -#, c-format -msgid "Delay before booting default image" -msgstr "Pauza pre startanja default image-a" - -#: ../../any.pm:1 -#, c-format -msgid "Restrict command line options" -msgstr "Ograničena komandna linika - opcije" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "East Europe" -msgstr "Istočna Evropa" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use free space" -msgstr "Koristi slobodan prostor" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use dhcp" -msgstr "koristi dhcpd" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mail alert" -msgstr "Mail alarm" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Internet configuration" -msgstr "Konfiguracija interneta" - -#: ../../lang.pm:1 -#, c-format -msgid "Uzbekistan" -msgstr "Uzbekistan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected %s" -msgstr "Detektovan %s" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _printers" -msgstr "/Autodetekcija _štampača" - -#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#, c-format -msgid "Finish" -msgstr "Kraj" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Show automatically selected packages" -msgstr "Automatski prikaži izabrane pakete" - -#: ../../lang.pm:1 -#, c-format -msgid "Togo" -msgstr "Togo" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "CPU flags reported by the kernel" -msgstr "CPU zastave prijavljena od strane kernela" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Something went wrong! - Is mkisofs installed?" -msgstr "Nešto je krenulo naopako! - Da li je mkisofs instaliran?" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "16 MB" -msgstr "16 MB" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Please try again" -msgstr "Probajte ponovo" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The model is correct" -msgstr "Ovaj model je tačan" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "FAT resizing failed: %s" -msgstr "FAT izmena veličine neuspela: %s" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Individual package selection" -msgstr "Pojedinačno biranje paketa" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition is not resizeable" -msgstr "Ovoj particici nije moguće promeniti veličinu" - -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Location" -msgstr "Lokacija" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable-hrc)" -msgstr "SAD (kabl-hrc)" - -#: ../../lang.pm:1 -#, c-format -msgid "Guatemala" -msgstr "Gvatemala" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Journalised FS" -msgstr "Journalised FS" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Ethernet cards promiscuity check" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Aktiviraj/Deaktiviraj proveru promiskuiteta mrežnih kartica." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "This machine" -msgstr "Ova mašina" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "DOS drive letter: %s (just a guess)\n" -msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Bahrain" -msgstr "Bahrein" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Select the files or directories and click on 'OK'" -msgstr "Odaberite fajlove ili direktorijume i klinite na 'Dodaj'" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit scsi modules" -msgstr "omit scsi moduli" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "family of the cpu (eg: 6 for i686 class)" -msgstr "Familija procesora (npr: 6 za i686 klasu)" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Because you are doing a network installation, your network is already " -"configured.\n" -"Click on Ok to keep your configuration, or cancel to reconfigure your " -"Internet & Network connection.\n" -msgstr "" -"Zbog toga što radite mrežnu instalaciju, vaša mreža je već podešena " -"podešena.\n" -"Kliknite na OK zadrdžali konfiguraciju Network/Internet konekcije, ili " -"cancel da bi ponovo uradili kofiguraciju.\n" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Run the daily security checks" -msgstr "ukoliko je podešeno na da, pokrenite dnevne sigurnosne provere." - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Keyboard layout: %s\n" -msgstr "Tip tastature: %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here you can choose whether the printers connected to this machine should be " -"accessable by remote machines and by which remote machines." -msgstr "" -"Ovde možete izabrati da li želite da štampači na ovoj mašini treba da budu " -"dostupni na drugim udaljenim mašinama i na kojim udaljenim mašinama." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (US)" -msgstr "Malteški (US)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "The creation of the boot floppy has been successfully completed \n" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" -"Manager/Windows), and NCP (NetWare) mount points." -msgstr "" -"Montiranje i demontiranje svih Mrežnih fajl sistema(NFS), SMB (Lan\n" -"Manager/Windows), i NCP (NetWare) tačaka montiranja. " - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Launch the wizard" -msgstr "Kliknite ovde za pokretanje čarobnjaka ->" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Tvcard" -msgstr "TV kartica" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Toggle between normal/expert mode" -msgstr "Pređi na normalni mod" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Size" -msgstr "Veličina" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "GRUB" -msgstr "GB" - -#: ../../lang.pm:1 -#, c-format -msgid "Greenland" -msgstr "Grenland" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+/FirstMouse+" -msgstr "Logitech MouseMan+/FirstMouse+" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Thursday" -msgstr "Četvrtak" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not the correct tape label. Tape is labelled %s." -msgstr "NIje dobra oznaka trake. Traka je označena sa %s." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"The setup of Internet Connection Sharing has already been done.\n" -"It's currently enabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"Podešavanje deljenja internet konekcije je već završeno.\n" -"Trenutno je omogućeno.\n" -"\n" -"šta želite da uradite?" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Delete All NBIs" -msgstr "Obriši sve NBIs" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This dialog allows you to fine tune your bootloader:\n" -"\n" -" * \"%s\": there are three choices for your bootloader:\n" -"\n" -" * \"%s\": if you prefer grub (text menu).\n" -"\n" -" * \"%s\": if you prefer LILO with its text menu interface.\n" -"\n" -" * \"%s\": if you prefer LILO with its graphical interface.\n" -"\n" -" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" -"you prefer, the bootloader can be installed on the second hard drive\n" -"(\"%s\"), or even on a floppy disk (\"%s\");\n" -"\n" -" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" -"given to the user at the console to select a boot entry other than the\n" -"default.\n" -"\n" -"!! Beware that if you choose not to install a bootloader (by selecting\n" -"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" -"system! Be sure you know what you are doing before changing any of the\n" -"options. !!\n" -"\n" -"Clicking the \"%s\" button in this dialog will offer advanced options which\n" -"are normally reserved for the expert user." -msgstr "" -"Ovaj dijalog vam nudi mogućnost za fino podešavanje vašeg startera:\n" -"\n" -" * \"Ponuđeni starteri\": imate tri opcije:\n" -"\n" -" * \"GRUB\": ukoliko više volite GRUB (tekstualni mod).\n" -"\n" -" * \"LILO sa grafičkim menijem\": ukoliko više volite LILO sa grafičkim\n" -"interfejsom.\n" -"\n" -" * \"LILO sa tekstualnim menijem\": ukoliko više volite LILO sa \n" -"tekstualnim interfejsom.\n" -"\n" -" * \"Boot uređaj\": u većini slučajeva, nećete menjati default\n" -"(\"/dev/hda\"), ali ukoliko želite, možete starter da instalirate na\n" -"drugi hard disk (\"/dev/hdb\"), ili čak na disketu (\"/dev/fd0\").\n" -"\n" -" * \"Vreme do pošetka startanja default sistema\": kada startujete računar,\n" -"ova pauza vam omogućava da izaberete - u starterovom meniju,\n" -"drugi sistem (recimo Njinjdovs).\n" -"\n" -"!! Budite pažljivi, jer ako izaberete da ne instalirate starterr (klikom na\n" -"\"Poništi\"), morate osigurati drugi način da startujete Mandrake\n" -"Linux sistem! Budite sigurni da znate št aradite pre nego izmenite\n" -"i jednu opciju. !!\n" -"\n" -"Klikom na opciju \"Napredno\" u ovom dijalogu će vam biti ponuđene mnoge " -"napredne\n" -"opcije, koje su rezervisane za napredne korisnike" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"if set, send the mail report to this email address else send it to root." -msgstr "" -"ukoliko je podešeno, pošaljite izveštaj na ovu email adresu uli je pošaljite " -"root-u." - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Which configuration of XFree do you want to have?" -msgstr "Koju XFree konfiguraciju želite da imate ?" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "More" -msgstr "Još" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" -"scanbus' would also show you the device number." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"With this security level, the use of this system as a server becomes " -"possible.\n" -"The security is now high enough to use the system as a server which can " -"accept\n" -"connections from many clients. Note: if your machine is only a client on the " -"Internet, you should choose a lower level." -msgstr "" -"Sa ovim sigurnosnim nivoom, korišćenje ovog sistema kao servera postaje " -"moguće.\n" -"Sigurnost je sada dovoljno velika za korišćenje mašine za server koji " -"prihvata\n" -"konekcije brojnih klijenata. Napomena: ukoliko je vaša mašina samo klijent " -"na Internetu, trebali bi da izaberete niži nivo." - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Server Name" -msgstr "Ime servera:" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Account Password" -msgstr "Lozinka za račun" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -"%s cannot be displayed \n" -". No Help entry of this type\n" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "" -"You decided to install the bootloader on a partition.\n" -"This implies you already have a bootloader on the hard drive you boot (eg: " -"System Commander).\n" -"\n" -"On which drive are you booting?" -msgstr "" -"Vi ste odlučili da instalirate starter na particiju.\n" -"Ovo ukazujen ato da već imate instaliran starter na hard disku koji " -"butujete.\n" -"\n" -"Na koji drajv se butujete?" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"WARNING!\n" -"\n" -"DrakX will now resize your Windows partition. Be careful: this\n" -"operation is dangerous. If you have not already done so, you\n" -"first need to exit the installation, run \"chkdsk c:\" from a\n" -"Command Prompt under Windows (beware, running graphical program\n" -"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" -"Command Prompt!), optionally run defrag, then restart the\n" -"installation. You should also backup your data.\n" -"When sure, press Ok." -msgstr "" -"UPOZORENJE!\n" -"\n" -"DrakX treba da izmeni veličinu Windows particije. Budite pažljivi: ova\n" -"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da izađete\n" -"iz instalacije,pokrenete pod Windows-om\n" -"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n" -"Ako ste sigurni, pritisnite OK (U redu)." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Tajik keyboard" -msgstr "Tadžikistanska tastatura" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can copy the printer configuration which you have done for the spooler %" -"s to %s, your current spooler. All the configuration data (printer name, " -"description, location, connection type, and default option settings) is " -"overtaken, but jobs will not be transferred.\n" -"Not all queues can be transferred due to the following reasons:\n" -msgstr "" -"Možete kopirati konfiguraciju štampača koju ste završili za spooler %s to %" -"s, vaš trenutni spooler. Svi konfiguracioni podaci (ime štampača, opis, " -"lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i " -"poslovi štampanja.\n" -"Ni svi queues ne mogu biti prebačeni zbog sledećih razloga:\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Font List" -msgstr "Lista fontova" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You may need to change your Open Firmware boot-device to\n" -" enable the bootloader. If you don't see the bootloader prompt at\n" -" reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Then type: shut-down\n" -"At your next boot you should see the bootloader prompt." -msgstr "" -"Moraćete da promenite Open Firmware boot-uređaj da \n" -" bi mogli da koristite starter. Ukoliko ne vidite prompt\n" -" pri restartu držite Command-Option-O-F pri startanju i unesite:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Onda ukucajte: shut-down\n" -"Kada sledeći put startujete mašinu trebali bi da vidite staterov prompt." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You appear to have an OldWorld or Unknown\n" -" machine, the yaboot bootloader will not work for you.\n" -"The install will continue, but you'll\n" -" need to use BootX or some other means to boot your machine" -msgstr "" -"Pošto izgleda da imate staromodnu ili nepoznatu \n" -" mašinu, yaboot starter neđe raditi kod vas.\n" -"Instalacija će biti nastavljena, ali ćete morati da\n" -"koristite BootX ili nešto drugo da bi podigli sistem" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Select file" -msgstr "Izaberite datoteku" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Choose the network or host on which the local printers should be made " -"available:" -msgstr "" -"Izaberite mrežu ili hosta na kojem bi lokalni štampači trebali biti dostupni:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"These commands you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications, but here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"Ove komande takođe možete koristiti u polju \"Komande za štampanje\" " -"dijaloga za štampanje u većem broju aplikacija, ali ovde nemojte da " -"određujete ime fajla jer njega postavlja sama aplikacija iz koje štampate.\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Japan" -msgstr "Japan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print option list" -msgstr "Lista sa opcijama za štampač" - -#: ../../standalone/localedrake:1 -#, c-format -msgid "The change is done, but to be effective you must logout" -msgstr "Izmene su završene, ali da bi ih primenili morate se izlogovati" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Country / Region" -msgstr "Zemlja" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Search servers" -msgstr "Traži servere" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NCP queue name missing!" -msgstr "Nedostaje ime za NCP red!" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Warning, another internet connection has been detected, maybe using your " -"network" -msgstr "" -"Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu " -"mrežu" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Cd-Rom labeled \"%s\"" -msgstr "Cd-Rom označen kao \"%s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CDRW media" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Saves and restores system entropy pool for higher quality random\n" -"number generation." -msgstr "" -"čuva i obnavlja sistemski entropy pool za veći kvalitet generisanje\n" -"slučajnih brojeva." - -#: ../advertising/07-server.pl:1 -#, c-format -msgid "Turn your computer into a reliable server" -msgstr "Pretvorite svoju mašinu u pouzdan server" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check empty password in /etc/shadow" -msgstr "ukoliko je podešeno na da, prverite praznu lozinku u /etc/shadow." - -#: ../../network/network.pm:1 -#, c-format -msgid " (driver %s)" -msgstr "(drajver %s)" - -#: ../../services.pm:1 -#, c-format -msgid "Start when requested" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Loopback file(s):\n" -" %s\n" -msgstr "" -"Loopback fajl(ovi): \n" -" %s\n" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "I don't know" -msgstr "Ne znam" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", TCP/IP host \"%s\", port %s" -msgstr ", TCP/IP host \"%s\", port %s" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"You are about to configure an Auto Install floppy. This feature is somewhat " -"dangerous and must be used circumspectly.\n" -"\n" -"With that feature, you will be able to replay the installation you've " -"performed on this computer, being interactively prompted for some steps, in " -"order to change their values.\n" -"\n" -"For maximum safety, the partitioning and formatting will never be performed " -"automatically, whatever you chose during the install of this computer.\n" -"\n" -"Do you want to continue?" -msgstr "" -"Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle " -"iopasna i mora se pažljivo koristiti.\n" -"\n" -"Sa ovom opcijom, moći ćete da ponovite instalaciju koju steizveli na ovom " -"računaru, sa povremenim upitima u cilju izmene određenih vrednosti " -"parametra.\n" -"\n" -"RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada neće biti " -"izvođeno automatskiy, bez obzira šta izabrali tokom instalacije na ovom " -"računaru.\n" -"\n" -"Da li želite da nastavite?" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Telugu" -msgstr "Tokelau" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Your card currently use the %s\"%s\" driver (default driver for your card is " -"\"%s\")" -msgstr "" -"\n" -"\n" -"Vaša kartica trenutno koristi %s\"%s\" drajver (default drajver za vašu " -"karticu je \"%s\")" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Uninstall" -msgstr "Post-deinstalacija" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connecting to Internet " -msgstr "Povezivanje na Internet" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid " (" -msgstr " (" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cpuid level" -msgstr "Cpuid nivo" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Novell server \"%s\", printer \"%s\"" -msgstr "na Novell serveru \"%s\", štampač \"%s\"" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Mongolian (cyrillic)" -msgstr "Mongolski (ćirilica)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Add a module" -msgstr "Dodaj modul" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Profile to delete:" -msgstr "Profil za brisanje:" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Local measure" -msgstr "Lokalna mera" - -#: ../../network/network.pm:1 -#, c-format -msgid "Warning : IP address %s is usually reserved !" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "busmouse" -msgstr "bus miš" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Create Etherboot Enabled Boot Images:\n" -" \tTo boot a kernel via etherboot, a special kernel/initrd image must " -"be created.\n" -" \tmkinitrd-net does much of this work and drakTermServ is just a " -"graphical \n" -" \tinterface to help manage/customize these images. To create the " -"file \n" -" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " -"include in \n" -" \tdhcpd.conf, you should create the etherboot images for at least " -"one full kernel." -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Account Login (user name)" -msgstr "Logovanje za račun (korisničko ime)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Fdiv bug" -msgstr "Fdiv bug" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"drakfirewall configurator\n" -"\n" -"Make sure you have configured your Network/Internet access with\n" -"drakconnect before going any further." -msgstr "" -"drakfirewall konfiguracija\n" -"\n" -"Proerite da li ste podesili vaš Mrežni/Internet pristup sa \n" -"drakconnect pre nego što nastavite." - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Accept broadcasted icmp echo" -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Prihvati/Odbij prenosivi icmp echo." - -#: ../../lang.pm:1 -#, c-format -msgid "Uruguay" -msgstr "Urugvaj" - -#: ../../lang.pm:1 -#, c-format -msgid "Benin" -msgstr "Benin" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "SMB/Windows server \"%s\", share \"%s\"" -msgstr "na Windows serveru \"%s\", deljeni \"%s\"" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Path selection" -msgstr "Selekcija putanje" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Name/IP address of host:" -msgstr "Ime/IP adresa hosta:" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor: %s\n" -msgstr "Monitor: %s\n" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Custom & system settings" -msgstr "Custom disk particioniranje" - -#: ../../partition_table/raw.pm:1 -#, c-format -msgid "" -"Something bad is happening on your drive. \n" -"A test to check the integrity of data has failed. \n" -"It means writing anything on the disk will end up with random, corrupted " -"data." -msgstr "" -"Nešto loše se dešava sa vašim hard diskom. \n" -"Test integriteta podataka nije prošao. \n" -"To znači da sve što se nalazi na disku će završiti kao đubre" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP missing!" -msgstr "Nedostaje ime hosta ili IP za štampač!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please check all users that you want to include in your backup." -msgstr "Selektujte sve korisnike koje želite da uključite u backup." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"The %s must be configured by printerdrake.\n" -"You can launch printerdrake from the Mandrake Control Center in Hardware " -"section." -msgstr "" -"Ovaj %s mora biti podešen u printerdrake.\n" -"Možete pokrenuti printerdrake iz Mandrake Kontrolnog Centra iz Hardver " -"sekcije." - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Key isn't writable" -msgstr "XawTV nije instaliran!" - -#: ../../lang.pm:1 -#, c-format -msgid "Bangladesh" -msgstr "Bangladeš" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (cable)" -msgstr "Japan (kabl)" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Initial tests" -msgstr "Testovi inicijala" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Continue" -msgstr "Nastavi" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom Restore" -msgstr "Obnavljanje po želji" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Saturday" -msgstr "Subota" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"\"%s\": if a sound card is detected on your system, it is displayed here.\n" -"If you notice the sound card displayed is not the one that is actually\n" -"present on your system, you can click on the button and choose another\n" -"driver." -msgstr "" -"\"Zvučna kartica\": ukoliko je zvučna kartica detektovana na vašem sistemu, " -"onda je prikazana\n" -"ovde. Ukoliko primetite da prikazana kartica nije ona koja je stvarno " -"prisutna\n" -"u vašem računaru, možete kliknuti na taster i\n" -"drugi drajver." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the root umask." -msgstr "" -"Argumenti: (umask)\n" -"\n" -"Podesite root umask." - -#: ../../install_any.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "Error reading file %s" -msgstr "Greška kod otvaranja datoteka %s" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Script-based" -msgstr "Bazirano na skripti" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "PLL setting:" -msgstr "PLL opcije :" - -#: ../../install_interactive.pm:1 ../../install_steps.pm:1 -#, c-format -msgid "You must have a FAT partition mounted in /boot/efi" -msgstr "Morate imati FAT particiju montiranu u /boot/efi" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " on " -msgstr " uklj. " - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "The URL must begin with http:// or https://" -msgstr "URL mora počinjati sa http:// ili https://" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can specify directly the URI to access the printer. The URI must fulfill " -"either the CUPS or the Foomatic specifications. Note that not all URI types " -"are supported by all the spoolers." -msgstr "" -"Možete direktno odrediti URI za pristup štampaču. URI mora ispunjavati ili " -"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podržani." - -#: ../../any.pm:1 -#, c-format -msgid "Other OS (SunOS...)" -msgstr "Drugi OS-ovi (SunOS,BSD,...)" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Install/Upgrade" -msgstr "Instalacija/Ažuriranje" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "%d packages" -msgstr "%d paketa" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Costa Rica" -msgstr "Kostarika" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" -"Backup and Restore application\n" -"\n" -"--default : save default directories.\n" -"--debug : show all debug messages.\n" -"--show-conf : list of files or directories to backup.\n" -"--config-info : explain configuration file options (for non-X " -"users).\n" -"--daemon : use daemon configuration. \n" -"--help : show this message.\n" -"--version : show version number.\n" -msgstr "" -"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" -"Program za Backup i vraćanje podataka\n" -"\n" -"--default : snima default direktorijume.\n" -"--debug : prikazuje sve debug poruke.\n" -"--show-conf : lista fajlova ili direktorijuma za backup.\n" -"--config-info : objašnjava podešavanje opcija za fajlove (za ne-X " -"korisnike).\n" -"--daemon : koristi daemon konfiguraciju. \n" -"--help : prikazuje ovu poruku.\n" -"--version : prikazuje verziju programa.\n" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Domain Authentication Required" -msgstr "Potrebna Autentifikacija Domena" - -#: ../../security/level.pm:1 -#, c-format -msgid "Use libsafe for servers" -msgstr "Koristi libsafe za servere" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Icelandic" -msgstr "Islandski" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"\n" -"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" -"testing] [-v|--version] " -msgstr "" -"\n" -"Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" -"testing] [-v|--version] " - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Maximum size\n" -" allowed for Drakbackup (MB)" -msgstr "" -"Unesite maksimalnu veličinu\n" -" dozvoljenu za Drakbackup" - -#: ../../loopback.pm:1 -#, c-format -msgid "Circular mounts %s\n" -msgstr "Kružno montiranje %s\n" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo/grub mode" -msgstr "Lilo/Grub mod" - -#: ../../lang.pm:1 -#, c-format -msgid "Martinique" -msgstr "Martinik" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "HardDrive / NFS" -msgstr "HardDrive / NFS" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Old user list:\n" -msgstr "" -"\n" -"- Korisnički fajlovi:\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Search Backups" -msgstr "" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "a number" -msgstr "broj" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swedish" -msgstr "Švedski" - -#. -PO: the %s is the driver type (scsi, network, sound,...) -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Which %s driver should I try?" -msgstr "Koji %s drajver da probam?" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"You will receive an alert if one of the selected services is no longer " -"running" -msgstr "Oglasiće se alarm ukoliko jedan od izabranih servisa nije više aktivan" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Weekday" -msgstr "Sreda" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Filesystem types:" -msgstr "Vrsta fajl sistema:" - -#: ../../lang.pm:1 -#, c-format -msgid "Northern Mariana Islands" -msgstr "Severno Marijanska Ostrva" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on HP JetDirect" -msgstr ", multi-fuunkcionalni uređaj na HP JetDirect" - -#: ../../mouse.pm:1 -#, c-format -msgid "none" -msgstr "nijedan" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"Name of the profile to create (the new profile is created as a copy of the " -"current one) :" -msgstr "" -"Ime profila koji se kreira (novi profil je kreiran kao kopija trenutnog) :" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Floppy" -msgstr "Flopi" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Ghostscript referencing" -msgstr "Ghostscript referenciranje" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Bootloader" -msgstr "Starter" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Authorize all services controlled by tcp_wrappers" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move" -msgstr "Premesti" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Bootloader to use" -msgstr "Starter koji će se koristiti" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server host" -msgstr "SMB server host:" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Name Servers:" -msgstr "Navedi servere:" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Minute" -msgstr "Minut" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"\n" -"Warning\n" -"\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" -"\n" -"\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" -"\n" -"\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" -msgstr "" -"\n" -"Upozorenje !\n" -"\n" -"Pažljivo pročitajte dole navedene uslove. Ukoliko se ne slažete sa bilo " -"kojim \n" -"delom, onda nemate odobrenje za instaliranje sledećeg CD-a. Pritisnite " -"'Odbijam' \n" -"da bi nastavili instalaciju bez upotrebe tih CD medija.\n" -"\n" -"\n" -"Neke komponente sadržane u sledećim CD medijama nisu pod\n" -"GPL Licencom ili sličnim ugovorima. Svaka takva komponenta je onda " -"uslovljena\n" -"uslovima i ugovorima sopstevene lincence. \n" -"Pažljivo pročitajte i upoznajte se sa takvim specifičnim licencama pre \n" -"nego uotrebite ili redistribuirate pomenute komponente. \n" -"Takve licence će u glavnom zabranjivati transfer, kopiranje \n" -"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n" -"rastavljanje, de-kompajliranje ili menjanje komponenti. \n" -"Bilo koji deo ugovora koji nije ispoštovan istovremeno uklanja i ostala vaša " -"prava\n" -"u datoj licenci. Ukoliko vam određena licenca ne garantuje takva\n" -"prava, obično ne možete instalirati programe na više od jedanog\n" -"aiatema, ili ih prilagoditi da se mogu koristiti na mreži. Ukoliko ste u " -"dilemi, molimo vas da direktno \n" -"kontaktirate distributera ili editora komponente. \n" -"Prenos na treće programe ili kopiranje takvih komponenti uključujući i\n" -"dokumentaciju je obično zabranjen.\n" -"\n" -"\n" -"Sva prava na komponente na sledećim CD medijama pripadaju njihovim \n" -"respektativnim autorima i zaštićene su zakonima o intelektuanoj svojini i \n" -"pravima koji se primenjuju na softverske programe.\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Expert mode" -msgstr "Ekspert mod" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" -msgstr "Ukloni ovaj štampač iz Star Office/OpenOffice.org/GIMP" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Linux Virtual Server, used to build a high-performance and highly\n" -"available server." -msgstr "" -"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n" -"servera." - -#: ../../lang.pm:1 -#, c-format -msgid "Micronesia" -msgstr "Mikronezija" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "4 billion colors (32 bits)" -msgstr "4 milijarde boja (32-bitna paleta)" - -#: ../../steps.pm:1 -#, c-format -msgid "License" -msgstr "Licenca" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to generate the keys." -msgstr "Generisanje tastera može da potraje par trenutaka." - -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"Here, you can setup the security level and administrator of your machine.\n" -"\n" -"\n" -"The Security Administrator is the one who will receive security alerts if " -"the\n" -"'Security Alerts' option is set. It can be a username or an email.\n" -"\n" -"\n" -"The Security Level menu allows you to select one of the six preconfigured " -"security levels\n" -"provided with msec. These levels range from poor security and ease of use, " -"to\n" -"paranoid config, suitable for very sensitive server applications:\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but " -"very\n" -"easy to use security level. It should only be used for machines not " -"connected to\n" -"any network and that are not accessible to everybody.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Standard</span>: This is the standard " -"security\n" -"recommended for a computer that will be used to connect to the Internet as " -"a\n" -"client.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">High</span>: There are already some\n" -"restrictions, and more automatic checks are run every night.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Higher</span>: The security is now high " -"enough\n" -"to use the system as a server which can accept connections from many " -"clients. If\n" -"your machine is only a client on the Internet, you should choose a lower " -"level.\n" -"\n" -"\n" -"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the " -"previous\n" -"level, but the system is entirely closed and security features are at their\n" -"maximum" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" -msgstr "Auto-detekcija štampača (Lokalni, TCP/Socket, i SMB štampači)" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Sagem (using pppoa) usb" -msgstr "Sagem (koristi pppoa) usb" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"An error occurred - no valid devices were found on which to create new " -"filesystems. Please check your hardware for the cause of this problem" -msgstr "" -"Dogodila se greška - nije nađen ispravan uređaj na kojem bi bili krerani " -"novi datotečnog sistemi. Proverite vaš hardver da vidite šta je uzrok ovog " -"problema." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting the printing system at boot time" -msgstr "Pokreni sistem za štampanje pri staranju sistema" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Do you want to start the connection at boot?" -msgstr "Da li želite da startujete konektovanje pri startanju sistema ?" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Processor ID" -msgstr "ID procesora" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound trouble shooting" -msgstr "Pomoć za podešavanje zvuka" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwerty layout)" -msgstr "Poljski (qwerty raspored)" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Add Printer" -msgstr "Štampač" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via CD:\n" -"\n" -msgstr "" -"\n" -"Drakbackup aktivnosti preko CD:\n" -"\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to install the printing system %s on a system running in the %" -"s security level.\n" -"\n" -"This printing system runs a daemon (background process) which waits for " -"print jobs and handles them. This daemon is also accessable by remote " -"machines through the network and so it is a possible point for attacks. " -"Therefore only a few selected daemons are started by default in this " -"security level.\n" -"\n" -"Do you really want to configure printing on this machine?" -msgstr "" -"Sada treba da instalirate sistem za štampanje %s na sistemu koji se nalazi u " -"%s sigurnosnom nivou.\n" -"\n" -"Ovaj sistem za štampanje pokreće demon (pozadinski proces) koji čeka na " -"poslove štampanja i upravlja njima. Ovaj demon je takođe dostupan preko " -"udaljenih mašina preko mreže pa je time podložan napadima. Zbog toga samo " -"par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.\n" -"\n" -"Da li stvarno želite da podesite štampanje na ovoj mašini?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host \"%s\", port %s" -msgstr "Host \"%s\", port %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition can't be used for loopback" -msgstr "Ova particija ne može biti korišćena za loopback " - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "File already exists. Use it?" -msgstr "Datoteka već postoji.Da li da ga koristim ?" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received: " -msgstr "primljeno: " - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right Alt key" -msgstr "Desni Alt taster" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the list of alternative drivers for this sound card" -msgstr "lista alternativnih drajvera za ovu zvučnu karticu" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway" -msgstr "Gateway" - -#: ../../lang.pm:1 -#, c-format -msgid "Tonga" -msgstr "Tonga" - -#: ../../lang.pm:1 -#, c-format -msgid "Tunisia" -msgstr "Tunis" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scanner sharing" -msgstr "Zajedničko deljenje skenera" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Profile: " -msgstr "Profil: " - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Click on a device in the left tree in order to display its information here." -msgstr "Kliknite na uređaj u levom stablu da bi ovde prikazali informacije." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid autologin." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli autologovanje." - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "XawTV isn't installed!" -msgstr "XawTV nije instaliran!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include critical files (passwd, group, fstab)" -msgstr "Ne uključuj kritične fajlove (passwd, group, fstab)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "old static device name used in dev package" -msgstr "staro statičko ime uređaja korišteno u dev paketu" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Enable the logging of IPv4 strange packets" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući prijavljivanje IPv4 strange paketa." - -#: ../../any.pm:1 -#, c-format -msgid "This label is already used" -msgstr "Ova oznaka je već u upotrebi" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer or connected directly to the network.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected. Also " -"your network printer(s) must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-" -"detection of only the printers connected to this machine. So turn off the " -"auto-detection of network printers when you don't need it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"Dobrodošli u Čarobnjak za podešavanje štampača\n" -"\n" -"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampač(e) povezane na " -"ovaj računar, poezan direktno na mrežu.\n" -"\n" -"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na rašunar i " -"u električno napajanje da bi mogli biti auto-detektovani. Takođe i mrežni " -"štampač(i)moraju biti povezani i uključeni.\n" -"\n" -"Nemojte da zaboravite da auto-detekcija štampača na mreži traje duže nego za " -"štampače koji se nalaze poveani direktno na vaš računar. Zato isključite " -"auto-detekciju mrežnih štampača ako vam to nije potrebno.\n" -"\n" -"Kliknite na \"Sledeći\" kada ste spremni, i na \"Poništi\" ako ne želite da " -"sada podešavate vaš štampač(e)." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek (polytonic)" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After formatting partition %s, all data on this partition will be lost" -msgstr "" -"Posle formatiranja particije %s,svi podaci na ovoj particiji će biti " -"izbrisani" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Connection Time: " -msgstr "Vreme konekcije: " - -#: ../../standalone/livedrake:1 -#, c-format -msgid "" -"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid live upgrade." -msgstr "" -"Ubacite vaš Instalacioni CD u pogon i pritisnite OK kada ste spremni.\n" -"Ukoliko ga nemate pritisnite Poništi da bi izbegli live upgrade." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use group id for execution" -msgstr "Koristi id grupe za izvršavanje" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the default user:" -msgstr "Izaberite default (osnovnog) korisnika:" - -#: ../../lang.pm:1 -#, c-format -msgid "Gabon" -msgstr "Gabon" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Printers on remote CUPS servers do not need to be configured here; these " -"printers will be automatically detected." -msgstr "" -"\n" -"Štampače na udaljenom CUPS serveru ne moraju da budu podešeni ovde; ovi " -"štampači će biti automatski detektovani." - -#: ../../any.pm:1 -#, c-format -msgid "" -"Mandrake Linux can support multiple languages. Select\n" -"the languages you would like to install. They will be available\n" -"when your installation is complete and you restart your system." -msgstr "Možete izabrati drugi jezik koji će biti dostupan posle instalacije " - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Directory (or module) to put the backup on this host." -msgstr "" -"Unesite direktorijum (ili modul) da\n" -" bi postavili backup na ovaj host." - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Domain" -msgstr "Domen" - -#: ../../any.pm:1 -#, c-format -msgid "Precise RAM size if needed (found %d MB)" -msgstr "Definiši veličinu RAM ako je potrebno (detektovano je %d MB)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" -"automated. DrakX will analyze the disk boot sector and act according to\n" -"what it finds there:\n" -"\n" -" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" -"boot sector. This way you will be able to load either GNU/Linux or another\n" -"OS.\n" -"\n" -" * if a grub or LILO boot sector is found, it will replace it with a new\n" -"one.\n" -"\n" -"If it cannot make a determination, DrakX will ask you where to place the\n" -"bootloader." -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 2 (optional)" -msgstr "Provajderov dns 2 (opciono)" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Boot device" -msgstr "Startni (boot) uređaj" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to resize?" -msgstr "Kojoj particiji želite da promenite veličinu?" - -#: ../../lang.pm:1 -#, c-format -msgid "United States Minor Outlying Islands" -msgstr "United States Minor Outlying Islands" - -#: ../../lang.pm:1 -#, c-format -msgid "Djibouti" -msgstr "Džibuti" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "A tool to monitor your logs" -msgstr "Alat za pregledanje log datoteka" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "detected on port %s" -msgstr "Detektovano na portu %s" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPD" -msgstr "LPD" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphics card: %s\n" -msgstr "Grafička kartica: %s\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/Set as _Default" -msgstr " (Podrazumevano)" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept icmp echo" -msgstr "" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Yaboot" -msgstr "Yaboot" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech CC Series with Wheel emulation" -msgstr "Logitech CC serija (serijski)" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Extended partition not supported on this platform" -msgstr "Extended particija nije podržana na ovoj platformi" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Splash selection" -msgstr "Splash selekcija" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "ISDN Configuration" -msgstr "ISDN Konfiguracija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "high" -msgstr "veliki" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing" -msgstr "Deljenje internet konekcije" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Choose file" -msgstr "Izaberi datoteku" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Summary: " -msgstr "Sažetak" - -#: ../../network/shorewall.pm:1 -#, c-format -msgid "" -"Warning! An existing firewalling configuration has been detected. You may " -"need some manual fixes after installation." -msgstr "" -"Upozorenje ! Postojeća firewalling konfiguracija je detektovana. Moždaće " -"biti potrebno ručno podešavanje nakon instalacije." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Photo Card Access on \"%s\"" -msgstr "Kartica za pristup Štampanje/Foto na \"%s\"" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Daily security check" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to enable printing on the printers mentioned above or on " -"printers in the local network?\n" -msgstr "" -"Da li želite da omogućite štampanje na štampačima koji su gore pomenuti na " -"lokalnoj mreži?\n" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer default settings" -msgstr "Selekcija modela štampača" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic PS2 Wheel Mouse" -msgstr "Generički PS2 miš sa točkićem" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"the WP flag in the CR0 register of the cpu enforce write proctection at the " -"memory page level, thus enabling the processor to prevent unchecked kernel " -"accesses to user memory (aka this is a bug guard)" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing old printer \"%s\"..." -msgstr "Uklanjam stari štampač \"%s\" ..." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Select a device !" -msgstr "Izaberite uređaj !" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove selected server" -msgstr "Ukloni selektovani server" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Sagem (using dhcp) usb" -msgstr "Sagem (koristi dhcp) usb" - -#: ../../lang.pm:1 -#, c-format -msgid "French Southern Territories" -msgstr "Francuske Južne Teritorije" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the vendor name of the processor" -msgstr "imee prizvođača procesora" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain %s:\n" -" \tFor users to be able to log into the system from a diskless " -"client, their entry in\n" -" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" -" \thelps in this respect by adding or removing system users from this " -"file." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "All data on this partition should be backed-up" -msgstr "Cvi podaci na ovoj particiji bi trebali biti sačuvani" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Installing package %s" -msgstr "Instaliram paket %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking device and configuring HPOJ..." -msgstr "Proveravam uređaj i podešavam HPOJ..." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To have more partitions, please delete one to be able to create an extended " -"partition" -msgstr "" -"Da bi omogućili kreiranje još (extended) particija izbrišite jednu od " -"postojećih" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Your printer was configured automatically to give you access to the photo " -"card drives from your PC. Now you can access your photo cards using the " -"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " -"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " -"\"man mtools\" on the command line for more info). You find the card's file " -"system under the drive letter \"p:\", or subsequent drive letters when you " -"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " -"can switch between drive letters with the field at the upper-right corners " -"of the file lists." -msgstr "" -"Vaš štampač se automatski podešava da bi vam dao pristup za foto kartice iz " -"vašeg PC-ja. Sada možete da pristupite vašim foto karticama koristeći se " -"grafičkim programom \"MtoolsFM\" (Meni: \"Aplikacije\" -> \"Fajl alati\" -> " -"\"MTools Fajl Menadžer\") ili naredbom iz komandne linije \"mtools" -"\" (unesite \"man mtools\" u komandnoj liniji za više informacija). Pronaći " -"ćete fajl sistem kartice po oznakom \"p:\", ili potonjim slovom kada imate " -"više od jednog HP štampača sa foto uređajima. U \"MtoolsFM\" možete da " -"zamenite slova uređajima sa poljem koje se nalazi u gonjem-desnom uglu liste " -"fajlova." - -#: ../../steps.pm:1 -#, c-format -msgid "Choose packages to install" -msgstr "Paketi za instalaciju" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "ALL existing partitions and their data will be lost on drive %s" -msgstr "SVE postojeće particije i podaci na disku %s će biti izgubljeni" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Your system does not have enough space left for installation or upgrade (%d " -"> %d)" -msgstr "Vaš sistem nema dovoljno mesta za instalaciju ili ažuriranje (%d > %d)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Every printer needs a name (for example \"printer\"). The Description and " -"Location fields do not need to be filled in. They are comments for the users." -msgstr "" -"Svaki štampač mora da ima ime (na primer \"štampač\"). Polja za Opis i " -"Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" -"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" -"information on how to setup a new printer. The interface presented there is\n" -"similar to the one used during installation." -msgstr "" -"\"Štampač\": ako kliknete na taster \"Bez štampača\" pokrenuti ćete " -"konfiguracioni\n" -"program za štampače. Pogledajte i odgovoarajuće upustvo u``Starter\n" -"Guide'' za više informacija o tome kako da podesite novi štampač. Program " -"koje se\n" -"tada aktivira je sličan onom koji se koristi tokom instalacije." - -#: ../../lang.pm:1 -#, c-format -msgid "Bhutan" -msgstr "Butan" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface" -msgstr "Mrežni interfejs" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnection from Internet failed." -msgstr "Diskonektovanje sa Interneta nije uspelo." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Reading printer data..." -msgstr "Učitavam podatke za štampač ..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Korean keyboard" -msgstr "Korejanska tastatura" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Not connected" -msgstr "Nije konektovan" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "No internet connection configured" -msgstr "Konfiguracija Internet konekcija" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek" -msgstr "Grčki" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Kitts and Nevis" -msgstr "Sveti Kits i Nevis" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Generic 3 Button Mouse with Wheel emulation" -msgstr "Generički 3 tastera miš" - -#: ../../any.pm:1 -#, c-format -msgid "Enable OF Boot?" -msgstr "Omogući OF startanje?" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use JFS for partitions smaller than 16MB" -msgstr "Ne možete koristiti JFS za particije manje od 16MB" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Erase your RW media (1st Session)" -msgstr "Proverite da li želite izbrišete vaš RW medij (1 sesiju)" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor VertRefresh: %s\n" -msgstr "Monitor - vertikalno osvežavanje: %s\n" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Mount point" -msgstr "Tačka montiranja" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "" -"An error occurred:\n" -"%s\n" -"Try to change some parameters" -msgstr "" -"pojavila se greška:\n" -"%s\n" -"Pokušajte da promenite neke od parametara" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "TCP/IP host \"%s\", port %s" -msgstr ", TCP/IP host \"%s\", port %s" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "User :" -msgstr "korisnik:" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore system" -msgstr "Obnovi sistem" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"These are the machines on which the locally connected scanner(s) should be " -"available:" -msgstr "" -"Ovo su mašine na kojima se nalaze lokalno povezani skener(i) koji bi " -"trebali biti dostupni:" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "The DHCP end ip" -msgstr "DHCP krajnji ip" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Another one" -msgstr "Još jedan" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup" -msgstr "Drakbackup" - -#: ../../lang.pm:1 -#, c-format -msgid "Colombia" -msgstr "Kolumbija" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Current configuration of `%s':\n" -"\n" -"Network: %s\n" -"IP address: %s\n" -"IP attribution: %s\n" -"Driver: %s" -msgstr "" -"Trenutna konfiguracija za `%s':\n" -"\n" -"Mreža: %s\n" -"IP adresa %s\n" -"IP atributi: %s\n" -"Drajver: %s" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play" -msgstr "Plug'n Play" - -#: ../../lang.pm:1 -#, c-format -msgid "Reunion" -msgstr "Reunion" - -#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Details" -msgstr "Detalji" - -#: ../../network/tools.pm:1 -#, c-format -msgid "For security reasons, it will be disconnected now." -msgstr "Iz sigurnosnih razloga, on će sada biti diskonektovan." - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Synchronization tool" -msgstr "Alat za sinhronizaciju" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking your system..." -msgstr "Proveravam vaš sistem..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print" -msgstr "Štampaj" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Insert the tape with volume label %s\n" -" in the tape drive device %s" -msgstr "" -"Ubacite traku za oznakom %s\n" -" u uređaj za trake %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Mongolia" -msgstr "Mongolija" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mounted\n" -msgstr "Montirano\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configure CUPS" -msgstr "Konfigurisanje X-a" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Graphical Interface" -msgstr "Grafički interfejs" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Users" -msgstr "Obnovi korisnike" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Encryption key for %s" -msgstr "Ključ za enkripciju" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Do you want to recover your system?" -msgstr "Da li želite da koristite aboot ?" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The portmapper manages RPC connections, which are used by\n" -"protocols such as NFS and NIS. The portmap server must be running on " -"machines\n" -"which act as servers for protocols which make use of the RPC mechanism." -msgstr "" -"Portmaper uravlja RPC konekcijama,koje koriste\n" -"protokoli kao NFS i NIS.Portmap server mora biti pokrenut na mašinama\n" -"koje rade kao serveri za protokole koji koriste RPC mehanizam." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Detected hardware" -msgstr "Detektovani hardver" - -#: ../../lang.pm:1 -#, c-format -msgid "Mauritius" -msgstr "Mauricijus" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Myanmar (Burmese)" -msgstr "Mijanmar (Burma)" - -#: ../../fs.pm:1 -#, c-format -msgid "Enabling swap partition %s" -msgstr "Omogućavam swap particiju %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no FAT partition to use as loopback (or not enough space left)" -msgstr "" -"Ne postoje FAT particije kojima se može promeniti veličina (ili nema " -"dovoljno slobodnog prostora)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (old)" -msgstr "Jermenski (stari)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"A printer named \"%s\" already exists under %s. \n" -"Click \"Transfer\" to overwrite it.\n" -"You can also type a new name or skip this printer." -msgstr "" -"Štampač \"%s\" već postoji pod %s. \n" -"Klikni na \"Prebaci\" da bi prešli preko starog.\n" -"Možete ukucati i novo ime ili preskočiti ovaj štampač." - -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "" -"Find the solutions of your problems via MandrakeSoft's online support " -"platform." -msgstr "" -"Pronađite rešenja za vaše probleme preko MandrakeSoft-ove online platforme " -"za podršku" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", host \"%s\", port %s" -msgstr ", host \"%s\", port %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Monaco" -msgstr "Monako" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Partitioning failed: %s" -msgstr "Particioniranje nije uspelo: %s" - -#: ../../fs.pm:1 ../../swap.pm:1 -#, c-format -msgid "%s formatting of %s failed" -msgstr "%s Formatiranje %s nije uspelo" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Canada (cable)" -msgstr "Kanada (kabl)" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Floppy creation completed" -msgstr "Povezivanje završeno." - -#: ../../help.pm:1 -#, c-format -msgid "Upgrade" -msgstr "Ažuriranje" - -#: ../../help.pm:1 -#, c-format -msgid "Workstation" -msgstr "Radna stanica" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Installing package %s\n" -"%d%%" -msgstr "" -"Instaliram pakete %s\n" -"%d%%" - -#: ../../lang.pm:1 -#, c-format -msgid "Kyrgyzstan" -msgstr "Kirgistan" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on USB" -msgstr ", multi-funkcionalni uređaj na USB" - -#: ../../../move/move.pm:1 -#, c-format -msgid "" -"We didn't detect any USB key on your system. If you\n" -"plug in an USB key now, Mandrake Move will have the ability\n" -"to transparently save the data in your home directory and\n" -"system wide configuration, for next boot on this computer\n" -"or another one. Note: if you plug in a key now, wait several\n" -"seconds before detecting again.\n" -"\n" -"\n" -"You may also proceed without an USB key - you'll still be\n" -"able to use Mandrake Move as a normal live Mandrake\n" -"Operating System." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "With basic documentation" -msgstr "Sa osnovnom dokumentacijom (preporuka!)" - -#: ../../services.pm:1 -#, c-format -msgid "Anacron is a periodic command scheduler." -msgstr "Anacron - podesite period.komande" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You must have a root partition.\n" -"For this, create a partition (or click on an existing one).\n" -"Then choose action ``Mount point'' and set it to `/'" -msgstr "" -"Morate imati root particiju.\n" -"Za ovo, kreirajte particiju (ili kliknite na postojeću).\n" -"Zatim izaberite \"Tačka montiranja\" i podesite na `/'" - -#: ../../lang.pm:1 -#, c-format -msgid "Western Sahara" -msgstr "Zapadna Sahara" - -#: ../../network/network.pm:1 -#, c-format -msgid "Proxy should be http://..." -msgstr "Proxy treba da bude http://..." - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "South Africa" -msgstr "Južna Afrika" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Eject tape after the backup" -msgstr "Koristi traku za backup" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Etherboot Floppy/ISO" -msgstr "Etherboot Floppy/ISO" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Modify printer configuration" -msgstr "Izmena konfiguracije štampača" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose a partition" -msgstr "Izaberite particiju" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Edit current rule" -msgstr "Uredi trenutno pravilo" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s" -msgstr "%s" - -#: ../../mouse.pm:1 -#, c-format -msgid "Please test the mouse" -msgstr "Molim Vas da testirate miša" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not update inode access times on this file system\n" -"(e.g, for faster access on the news spool to speed up news servers)." -msgstr "" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "3 buttons with Wheel emulation" -msgstr "Emulacija tastera" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Sticky-bit" -msgstr "sticky-bit" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Other Media" -msgstr "Drugi Medij" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+" -msgstr "Logitech MouseMan+" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup system files" -msgstr "Backup-uj sistemske fajlove" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Sector" -msgstr "Sektor" - -#: ../../lang.pm:1 -#, c-format -msgid "Qatar" -msgstr "Katar" - -#: ../../any.pm:1 -#, c-format -msgid "LDAP Base dn" -msgstr "LDAP Base dn" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"You can't select this package as there is not enough space left to install it" -msgstr "Ne možete selektovati ovaj paket jer nema više slobodnog prostora" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "generate auto-install floppy" -msgstr "Kreiraj auto instalacionu disketu" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Dialing mode" -msgstr "Mod za biranje" - -#: ../../services.pm:1 -#, c-format -msgid "File sharing" -msgstr "Zajedničko deljenje fajlova" - -#: ../../any.pm:1 -#, c-format -msgid "Clean /tmp at each boot" -msgstr "Očisti /tmp pri svakom startanju" - -#: ../../lang.pm:1 -#, c-format -msgid "Malawi" -msgstr "Malavi" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "local config: false" -msgstr "Lokalne datoteke" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "System settings" -msgstr "Custom disk particioniranje" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please choose your type of mouse." -msgstr "Izaberite tip miša." - -#: ../../services.pm:1 -#, c-format -msgid "running" -msgstr "pokrenuto" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "class of hardware device" -msgstr "klasa hardverskog uređaja" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"These are the machines and networks on which the locally connected printer" -"(s) should be available:" -msgstr "" -"Ovo su mašine i mreže na kojima se nalaze lokalno povezani štamač(i) koji bi " -"trebali biti dostupni:" - -#: ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "United Kingdom" -msgstr "Velika Britanija" - -#: ../../lang.pm:1 -#, c-format -msgid "Indonesia" -msgstr "Indonezija" - -#: ../../standalone/draksec:1 -#, c-format -msgid "default" -msgstr "default" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "France [SECAM]" -msgstr "Francuska [SECAM]" - -#: ../../any.pm:1 -#, c-format -msgid "restrict" -msgstr "ograničeno" - -#: ../../pkgs.pm:1 -#, c-format -msgid "must have" -msgstr "mora imati" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"CUPS does not support printers on Novell servers or printers sending the " -"data into a free-formed command.\n" -msgstr "" -"CUPS ne podržava štampače na Novell serverima ili štampačima koji šalju " -"podatke u slobodno-formiranu komandu.\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Senegal" -msgstr "Senegal" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Command line" -msgstr "Komandna linija" - -#: ../advertising/08-store.pl:1 -#, c-format -msgid "" -"Our full range of Linux solutions, as well as special offers on products and " -"other \"goodies\", are available on our e-store:" -msgstr "" -"Široki raspon Linux rešenja, kao i slecijalnih ponuda proizvoda i 'goodies'-" -"a, je dostupan i preko Interneta u našem e-marketu:" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "March" -msgstr "Mart" - -#: ../../any.pm:1 -#, c-format -msgid "access to administrative files" -msgstr "pristup administrativnim fajlovima" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Error during sendmail.\n" -" Your report mail was not sent.\n" -" Please configure sendmail" -msgstr "" -"Greška pri slanju mail-a\n" -" vaš izveštaj nije poslan\n" -" Podesite sendmail" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not allow set-user-identifier or set-group-identifier\n" -"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" -"have suidperl(1) installed.)" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Montserrat" -msgstr "Monserat" - -#: ../../help.pm:1 -#, c-format -msgid "Automatic dependencies" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Swap" -msgstr "Swap" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Custom settings" -msgstr "Custom disk particioniranje" - -#: ../../../move/move.pm:1 -#, c-format -msgid "" -"The USB key seems to have write protection enabled, but we can't safely\n" -"unplug it now.\n" -"\n" -"\n" -"Click the button to reboot the machine, unplug it, remove write protection,\n" -"plug the key again, and launch Mandrake Move again." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Other" -msgstr "Obnovi ostalo" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "TV card" -msgstr "TV katica" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on SMB/Windows 95/98/NT server" -msgstr "Štampač na SMB/Windows 95/98/NT serveru" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "/_Configure CUPS" -msgstr "Konfigurisanje X-a" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid ", " -msgstr ", " - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit lspci" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove selected host/network" -msgstr "Ukloni selektovanog hosta/mrežu" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Postfix is a Mail Transport Agent, which is the program that moves mail from " -"one machine to another." -msgstr "" -"Postfix je Mail Transport Agent,koji u stvaripremešta poštu sa jedne mašine " -"na drugu." - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Uzbek (cyrillic)" -msgstr "Srpski (ćirilica)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"Here you can choose the key or key combination that will \n" -"allow switching between the different keyboard layouts\n" -"(eg: latin and non latin)" -msgstr "" -"Ovde možete izabrati taster ili kombinaciju tastera koja će \n" -"dozvoliti izmenu rasporeda tastatura\n" -"(npr: latin i non latin)" - -#: ../../network/network.pm:1 -#, c-format -msgid "Network Hotplugging" -msgstr "Direktno priključivanje na mrežu" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, reports check result to tty." -msgstr "ukoliko je podešeno na da, izveštaj o proveri pošaljite na tty." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From CD" -msgstr "Obnovi sa CDa" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"You are about to configure your computer to share its Internet connection.\n" -"With that feature, other computers on your local network will be able to use " -"this computer's Internet connection.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." -msgstr "" -"Vaš računar možete podesiti za deljenje njegove Internet konekcije.\n" -"sa ovom opcijom, drugi kompjuteri na vašoj lokalnoj mreži će moći da " -"koristeInternet konekciju sa ovog računara.\n" -"\n" -"Proverite da li je podešena vaša Mrežni/Internet pristup preko drakconnect " -"pre nego što nastavimo.\n" -"\n" -"Napomena: potrebana vam je mrežna kartica da bi podesili lokalnu mrežu(LAN)." - -#: ../../network/ethernet.pm:1 -#, c-format -msgid "" -"Please choose which network adapter you want to use to connect to Internet." -msgstr "" -"Izaberite mrežni adapter koji želite da koristite za konekciju na internet" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo memory card access on your HP multi-function device" -msgstr "" -"Pristup Foto memorijskoj kartici na vašem HP multi-funkcionalnom uređaju" - -#: ../advertising/09-mdksecure.pl:1 -#, fuzzy, c-format -msgid "" -"Enhance your computer performance with the help of a selection of partners " -"offering professional solutions compatible with Mandrake Linux" -msgstr "" -"MandrakeSoft radi zajedno sa velikim brojem kompanija nudeći profesionalna " -"rešenja kompatibilna sa Mandrake Linux-om. Lista ovih partnera je dostupna u " -"MandrakeStore" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Authors: " -msgstr "Autori" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now disabled." -msgstr "Deljenje internet konekcije je onemogućeno." - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, verify checksum of the suid/sgid files." -msgstr "ukoliko je podešeno na da, proverite checksum za suid/sgid fajlove." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Latin American" -msgstr "Latino-Američki" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Japanese text printing mode" -msgstr "Promenite sistem za štampanje" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Old device file" -msgstr "Stari fajl uređaja" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Info: " -msgstr "Info: " - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Button `%s': %s" -msgstr "Taster `%s': %s" - -#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 -#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Please wait" -msgstr "Samo momenat..." - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetMouse" -msgstr "Genius NetMouse" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "None" -msgstr "Neijedan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The entered IP is not correct.\n" -msgstr "Unešena IP adresa nije ispravna.\n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please be sure that the cron daemon is included in your services." -msgstr "" -"Proverite da li je cron demon uključen u vaše servise. \n" -"\n" -"Možete primetiti da svi 'net' mediji takođe koriste hard disk." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Ethernet Card" -msgstr "Mrežna kartica" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Delete selected printer" -msgstr "Izbriši odabrano pravilo" - -#: ../../services.pm:1 ../../ugtk2.pm:1 -#, c-format -msgid "Info" -msgstr "Info" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Install" -msgstr "Instaliraj" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Click on \"%s\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"%s\" to stop this operation without losing any data and\n" -"partitions present on this hard drive." -msgstr "" -"Kliknite na \"Sledeće ->\" ukoliko želite da izbrišete sve podatke i \n" -"particije na ovom hard disku.Budite pažljivi, posle klika na \"U redu\", vi\n" -"nećete moći da povratite bilo koji podatak ili particiju na hard disku,\n" -"pa i bilo koje Windows podatke.\n" -"\n" -"Kliknite na \"<- Pprethodno\" da bi poništi ovu operaciju bez gubljenja " -"podataka i\n" -"particija koje su prisutne na ovom hard disku." - -#: ../../steps.pm:1 -#, c-format -msgid "Exit install" -msgstr "Izlaz iz instalacije" - -#: ../../../move/move.pm:1 -#, c-format -msgid "Need a key to save your data" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Everything has been configured.\n" -"You may now share Internet connection with other computers on your Local " -"Area Network, using automatic network configuration (DHCP)." -msgstr "" -"Sve je podešeno.\n" -"Sada možete deliti Internet konekciju sa drugim kompjuterima na vašoj " -"lokalnoj mreži (LAN), koristeći automatsku mrežnu konfiguraciju (DHCP)." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Remote CUPS server" -msgstr "Udaljeni CUPS server" - -#: ../../mouse.pm:1 -#, c-format -msgid "Sun - Mouse" -msgstr "Sun Miš" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"There is only one configured network adapter on your system:\n" -"\n" -"%s\n" -"\n" -"I am about to setup your Local Area Network with that adapter." -msgstr "" -"Postoji samo jedan konfigurisan mrežni adapter na vašem sistemu:\n" -"\n" -"%s\n" -"\n" -"Sada podeavam vašu lokalnu mrežu sa ovim adapterom." - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit cpuinfo" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Minimal install" -msgstr "Minimalno instaliraj" - -#: ../../lang.pm:1 -#, c-format -msgid "Ethiopia" -msgstr "Etiopija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "YES" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable \"crontab\" and \"at\" for users" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Devanagari" -msgstr "Devanagri" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"- pci devices: this gives the PCI slot, device and function of this card\n" -"- eide devices: the device is either a slave or a master device\n" -"- scsi devices: the scsi bus and the scsi device ids" -msgstr "" -"- pci uređaji: ovo nam daje PCI slot, uređaj i funkciju za ovu karticu\n" -"- eide uređaji: uređaj je ili slave ili master\n" -"- scsi uređaji: scsi bus i id scsi uređaja" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Total size: %d / %d MB" -msgstr "Ukupna veličina: %d / %d MB" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "disabled" -msgstr "onemogućeno" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Search for new scanners" -msgstr "Tražim nove skenere" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Disabling servers..." -msgstr "Uklanjam servise..." - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Installation of %s failed. The following error occured:" -msgstr "Instalacija %s-a neuspela. Greška je:" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." -msgstr "Ne mogu da pokrenem mkinitrd -f /boot/initrd-%s.img %s." - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"You have selected the following server(s): %s\n" -"\n" -"\n" -"These servers are activated by default. They don't have any known security\n" -"issues, but some new ones could be found. In that case, you must make sure\n" -"to upgrade as soon as possible.\n" -"\n" -"\n" -"Do you really want to install these servers?\n" -msgstr "" -"Vi ste izabrali sledeđe servere: %s\n" -"\n" -"\n" -"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih " -"sigurnosnih\n" -"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate " -"ih ažurirati\n" -"što je pre moguđe.\n" -"\n" -"\n" -"Da li zaista želite da instalirate ove servise?\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Network printer (TCP/Socket)" -msgstr "Mrežni štampač (TCP/Socket)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup User files..." -msgstr "backup-ovanje korsinikovih fajlova" - -#: ../../steps.pm:1 -#, c-format -msgid "Install system" -msgstr "Instaliraj sistem" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "First DNS Server (optional)" -msgstr "Prvi DNS Server (opcija)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Alternatively, you can specify a device name/file name in the input line" -msgstr "" -"Alternativno, možete da odredite ime/ime fajla uređaja u liniju za unos" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" -"is greater than 3 in /etc/security/msec/security.conf, creates the\n" -"symlink /etc/security/msec/server to point to\n" -"/etc/security/msec/server.<SERVER_LEVEL>.\n" -"\n" -"The /etc/security/msec/server is used by chkconfig --add to decide to\n" -"add a service if it is present in the file during the installation of\n" -"packages." -msgstr "" -"Argumenti: ()\n" -"\n" -"Ukoliko je SERVER_LEVEL (ili je SECURE_LEVEL odsutan) veći od 3\n" -"u /etc/security/msec/security.conf, kreira simbolički link /etc/security/" -"msec/server\n" -"da upućuje na /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/" -"server\n" -"se koristi od strane chkconfig --add da bi dodali servis ukoliko je prisutan " -"u fajlu\n" -"tokom instalacije paketa." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Russian (Phonetic)" -msgstr "Ruski (Fonetski)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Config..." -msgstr "dhcpd Konfiguracija..." - -#: ../../any.pm:1 -#, c-format -msgid "LILO/grub Installation" -msgstr "LILO/grub instalacija" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Israeli" -msgstr "Jevrejski" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on server \"%s\"" -msgstr "Štampač \"%s\" na serveru \"%s\"" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Floppy can be removed now" -msgstr "Disketu sada možete da izbacite iz uređaja" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Truly minimal install" -msgstr "Minimalno instaliraj" - -#: ../../lang.pm:1 -#, c-format -msgid "Denmark" -msgstr "Danska" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving partition..." -msgstr "Premeštanje particije..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "(This) DHCP Server IP" -msgstr "(Ovaj) DHCP server IP" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Test of the configuration" -msgstr "Testiranje konfiguracije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing %s ..." -msgstr "Instaliram %s ..." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"If you told the installer that you wanted to individually select packages,\n" -"it will present a tree containing all packages classified by groups and\n" -"subgroups. While browsing the tree, you can select entire groups,\n" -"subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right to let you know the purpose of the package.\n" -"\n" -"!! If a server package has been selected, either because you specifically\n" -"chose the individual package or because it was part of a group of packages,\n" -"you will be asked to confirm that you really want those servers to be\n" -"installed. By default Mandrake Linux will automatically start any installed\n" -"services at boot time. Even if they are safe and have no known issues at\n" -"the time the distribution was shipped, it is entirely possible that that\n" -"security holes were discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" -"install the listed services and they will be started automatically by\n" -"default during boot. !!\n" -"\n" -"The \"%s\" option is used to disable the warning dialog which appears\n" -"whenever the installer automatically selects a package to resolve a\n" -"dependency issue. Some packages have relationships between each other such\n" -"that installation of a package requires that some other program is also\n" -"rerquired to be installed. The installer can determine which packages are\n" -"required to satisfy a dependency to successfully complete the installation.\n" -"\n" -"The tiny floppy disk icon at the bottom of the list allows you to load a\n" -"package list created during a previous installation. This is useful if you\n" -"have a number of machines that you wish to configure identically. Clicking\n" -"on this icon will ask you to insert a floppy disk previously created at the\n" -"end of another installation. See the second tip of last step on how to\n" -"create such a floppy." -msgstr "" -"Na kraju, u zavisnosti od vašeg izbora da da birate pojedinačne pakete\n" -"ili ne, biće vam prikazano stablo sa svim paketima klasifikovanim\n" -"po grupama i podgrupama. Dok pretražujete stablo, možete selektovati cele\n" -"grupe, podgrupe, ili individualne pakete.\n" -"\n" -"Kada kod selektujete paket na stablu, opis se pojavljuje sa desne\n" -"strane. da bi mogli da se upoznate namenom paketa.\n" -"\n" -"!! Ukoliko je server paket izabran slučajno ili kao deo\n" -"cele grupe, bićete upitani da li zaista želite da instalirate\n" -"ponuđene servere. Pod Mandrake Linux-om, svi instalirani\n" -"serveri se startuju po default-u za vreme podizanja sistema. Čak i ako su " -"sigurni i nemaju\n" -"poznatih bezbednosnih propusta do vremena izlaska distribucije, može se " -"desiti\n" -"da sigurnosne rupe budu otkivene kasnije.\n" -" Ukoliko ne znate koji pojedinačni servis šta treba da radi\n" -"ili zašto se instalira, onda kliknite \"Ne\". Klikom na \"Da\" ćete\n" -"instalirati prikazane servis i oni će biti pokrenuti automatski po\n" -"default-u. !!\n" -"\n" -"Opcija \"Automatske međuzavisnosti\" jednostavno isključuje dijalog sa " -"upozorenjem\n" -"koji se javlja svaki put kada instaler automatski selektuje pakete. Ovo se\n" -"javlja zato što on određuje da mora da zadovolji zavisnosti sa drugim\n" -"paketom da bi uspešno završio instalaciju.\n" -"\n" -"Mala ikonica flopi diska na dnu liste vam omogućava da učitate\n" -"listu paketa birane tokom prethodne instalacije. Klikom na ovu ikonicu\n" -"će od vas biti traženo da ubacite disketu kreiranu ranije na kraju \n" -"prethodne instalacije. Pogledajte poslednji pasus (korak) da bi naučili kako " -"da kreirate \n" -"takvu disketu." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose your filesystem encryption key" -msgstr "Izaberite ključ za enkripciju fajl sistema" - -#: ../../lang.pm:1 -#, c-format -msgid "Sierra Leone" -msgstr "Sijera Leone" - -#: ../../lang.pm:1 -#, c-format -msgid "Botswana" -msgstr "Bocvana" - -#: ../../lang.pm:1 -#, c-format -msgid "Andorra" -msgstr "Andora" - -#: ../../standalone/draksec:1 -#, c-format -msgid "(default value: %s)" -msgstr "(podrazumevana vrednost: %s)" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." -msgstr "" -"Argumenti: (max, inactive=-1)\n" -"\n" -"Podesite lozinku ciljajući na \\fImax\\fP dana i izmena pauze na " -"\\fIinactive\\fP." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (Letter)" -msgstr "Alternativna test stranica" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"DHCP Server Configuration.\n" -"\n" -"Here you can select different options for the DHCP server configuration.\n" -"If you don't know the meaning of an option, simply leave it as it is.\n" -"\n" -msgstr "" -"DHCP Server Konfiguracija.\n" -"\n" -"Ovde možete odabrati različite opcije za DHCP server konfiguraciju.\n" -"Ukoliko ne znate značenje neke opcije, jednostavno je nemojte menjati.\n" -"\n" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Choose an X server" -msgstr "Izaberite X server" - -#: ../../../move/tree/mdk_totem:1 -#, c-format -msgid "Copying to memory to allow removing the CDROM" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Swap partition size in MB: " -msgstr "Veličina Swap particije u MB:" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No changes to backup!" -msgstr "Nema izmena za backup!" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Formatted\n" -msgstr "Formatirano\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Type of install" -msgstr "Tip instalacije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on SMB/Windows server \"%s\"" -msgstr "Štampač \"%s\" na SMB/Windows serveru \"%s\"" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated numbers" -msgstr "%d odvojeni brojevi sa zarezom" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The rusers protocol allows users on a network to identify who is\n" -"logged in on other responding machines." -msgstr "" -"rusers protokol omogućava korisnicima na mreži da otkriju ko je\n" -"ulogovan na drugim mašinama." - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Automatic Steps Configuration" -msgstr "Podešavanje automatizovanih koraka" - -#: ../../lang.pm:1 -#, c-format -msgid "Barbados" -msgstr "Barbados" - -#: ../advertising/02-community.pl:1 -#, c-format -msgid "" -"Want to know more and to contribute to the Open Source community? Get " -"involved in the Free Software world!" -msgstr "" -"Da li želite da saznate više o Open Source zajednici? Priključite se svetu " -"Bespatnog Softvera!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to backup..." -msgstr "Izaberite podatke koji želite da backup-ujete..." - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Connection failed.\n" -"Verify your configuration in the Mandrake Control Center." -msgstr "" -"povezivanje neuspelo.\n" -"Proverite vašu konfiguraciju u Mandrake Kontrolnom Centru." - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received" -msgstr "primljeno" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Enable su only from the wheel group members or for any user" -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Omogućavanje su samo za korisnije wheel grupe ili za svakog korisnika." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_New" -msgstr "/Datoteka/_Nova" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DNS Server IP" -msgstr "DNS server IP" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "IP Range End:" -msgstr "Kraj IP raspona:" - -#: ../../security/level.pm:1 -#, c-format -msgid "High" -msgstr "Velika" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Add a new printer to the system" -msgstr "Dodaj korisnika u sistem" - -#: ../../any.pm:1 -#, c-format -msgid "NoVideo" -msgstr "NoVideo" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "this field describes the device" -msgstr "Ovo polje opisuje uređaj" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Adding printer to Star Office/OpenOffice.org/GIMP" -msgstr "Dodajem štampač u Star Office/OpenOffice.org/GIMP" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printers" -msgstr "Lokalni štampači" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Installation image directory" -msgstr "Instalacioni image direktorijum" - -#: ../../any.pm:1 -#, c-format -msgid "NIS Server" -msgstr "NIS Server" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Port: %s" -msgstr "Port: %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Spain" -msgstr "Španija" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "local config: %s" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "This user name has already been added" -msgstr "Ovo korisničko ime već postoji" - -#: ../../interactive.pm:1 -#, c-format -msgid "Choose a file" -msgstr "Izaberite fajl" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Apply" -msgstr "Promeni" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Auto-detect available ports" -msgstr "Autodetekcija dostupnih portova" - -#: ../../lang.pm:1 -#, c-format -msgid "San Marino" -msgstr "San Marino" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently disabled" -msgstr "Deljenje internet konekcije je trenutno onemogućeno" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Belgium" -msgstr "Belgija" - -#: ../../lang.pm:1 -#, c-format -msgid "Kuwait" -msgstr "Kuvajt" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the window manager to run:" -msgstr "Izaberite window menadzer koji želite da koristite:" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "December" -msgstr "Decembar" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "sub generation of the cpu" -msgstr "Pod generacija za procesor" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "First Time Wizard" -msgstr "Čarobnjak po prvi put" - -#: ../../lang.pm:1 -#, c-format -msgid "Taiwan" -msgstr "Tajvan" - -#: ../../lang.pm:1 -#, c-format -msgid "Pakistan" -msgstr "Pakistan" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "please wait, parsing file: %s" -msgstr "molim Vas sačekajte, parsiram datoteku: %s" - -#: ../../install_steps.pm:1 ../../../move/move.pm:1 -#, c-format -msgid "" -"An error occurred, but I don't know how to handle it nicely.\n" -"Continue at your own risk." -msgstr "" -"Greška, ali neznam kako da je razrešim.\n" -"Nastavite na vaš rizik!" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Importance: " -msgstr "Važno: %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To be able to print with your Lexmark inkjet and this configuration, you " -"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." -"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " -"\"Linux\" as operating system. The drivers come as RPM packages or shell " -"scripts with interactive graphical installation. You do not need to do this " -"configuration by the graphical frontends. Cancel directly after the license " -"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " -"adjust the head alignment settings with this program." -msgstr "" -"Da bi mogli da štampate na vašem Lexmark inkjet štampaču morate da imate " -"drajvere koje je kreirao Lexmark (http://www.lexmark.com/).Kliknite na " -"taster \"Drajveri\". nakon toga izaberite vaš model i operativni sistem, u " -"vašem slučaju \"Linux\". Drajveri su upakovani u RPM pakete ili shell " -"skripte sa interaktivnom grafičkom instalacijom. Ne morate da dradite ovu " -"konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o licenci. Onda " -"ištampajte printhead alignment stranice sa \"lexmarkmaintain\" a podesite " -"opcije za položaj glave sa ovim programom." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Permissions" -msgstr "Dozvole" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider name (ex provider.net)" -msgstr "Ime provajdera (npr. provider.net)" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"Your system is low on resources. You may have some problem installing\n" -"Mandrake Linux. If that occurs, you can try a text install instead. For " -"this,\n" -"press `F1' when booting on CDROM, then enter `text'." -msgstr "" -"Vaš sistem ima manjak snage. Usled toga možete imati problema pri " -"instalaciji\n" -"Mandrake Linux. Ukoliko se oni pojave, možete probati tekstualnu " -"instalaciju. Da bi to postigli,\n" -"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte `text'." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use the Windows partition for loopback" -msgstr "Koristi Windows particiju za loopback" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (typewriter)" -msgstr "Jermenski (typewriter)" - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connection type: " -msgstr "Tip konekcije: " - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Graphical interface" -msgstr "Grafički interfejs" - -#: ../../lang.pm:1 -#, c-format -msgid "Chad" -msgstr "Čad" - -#: ../../lang.pm:1 -#, c-format -msgid "India" -msgstr "Indija" - -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s with 3D hardware acceleration" -msgstr "XFree %s sa 3D hardverskom akceleracijom" - -#: ../../lang.pm:1 -#, c-format -msgid "Slovakia" -msgstr "Slavačka" - -#: ../../lang.pm:1 -#, c-format -msgid "Singapore" -msgstr "Singapur" - -#: ../../lang.pm:1 -#, c-format -msgid "Cambodia" -msgstr "Kambodža" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Monitor HorizSync: %s\n" -msgstr "Monitor - horizontalna frekvencija: %s\n" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Path" -msgstr "Putanja" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "NOT FOUND" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here you can specify any arbitrary command line into which the job should be " -"piped instead of being sent directly to a printer." -msgstr "" -"Ovde možete da odredite bilo koji komandnu liniju na koji zadatak za štampač " -"treba da bude upućen umesto da se direktno šalje na štampač." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printing system (%s) will not be started automatically when the machine " -"is booted.\n" -"\n" -"It is possible that the automatic starting was turned off by changing to a " -"higher security level, because the printing system is a potential point for " -"attacks.\n" -"\n" -"Do you want to have the automatic starting of the printing system turned on " -"again?" -msgstr "" -"Sistem za štampanje (%s)neće biti automatski pokrenut pri startanju mašine.\n" -"\n" -"Moguće je automatsko startanje isključeno promenom na višlji nivo " -"sigurnosti, zbog toga što je sistem za štampanje primamljiv za napade.\n" -"\n" -"Da li ponovo želite da automatski startujete sistem za štampanje ?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printer %s\n" -"What do you want to modify on this printer?" -msgstr "" -"Štampač %s\n" -"Da li hoćete da izmenite opcije za ovaj štampač?" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Add host" -msgstr "Dodaj hosta" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"If you really think that you know which driver is the right one for your " -"card\n" -"you can pick one in the above list.\n" -"\n" -"The current driver for your \"%s\" sound card is \"%s\" " -msgstr "" -"Ukoliko zaista mislite da znate koji je pravi drajver za vašu karticu\n" -"možete izabrati jednu sa gornje liste.\n" -"\n" -"Trenutni drajver za vašu \"%s\" zvučnu karticu je \"%s\" " - -#: ../../any.pm:1 -#, c-format -msgid "" -"Would you like to allow users to share some of their directories?\n" -"Allowing this will permit users to simply click on \"Share\" in konqueror " -"and nautilus.\n" -"\n" -"\"Custom\" permit a per-user granularity.\n" -msgstr "" -"Da li bi želeli da dozvolite korisnicima zajednički dele neke od svojih " -"direktorijuma?\n" -"Da bi ovo mogli da omogućite jednostavno kliknite na \"Share\" u konqueror-u " -"ili nautilus-u.\n" -"\n" -"\"Custom\" dozvoljava detaljnija per-user podešavanja.\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Please choose load or save package selection on floppy.\n" -"The format is the same as auto_install generated floppies." -msgstr "" -"Molim Vas da izaberete učitavanje ili snimanje selekcije paketa na disketu.\n" -"Format koji se koristi je isti kao i kod auto_install generisanih disketa." - -#: ../../../move/tree/mdk_totem:1 -#, fuzzy, c-format -msgid "No CDROM support" -msgstr "Podrška za radio :" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "China (broadcast)" -msgstr "Kina (broadcast)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use quota for backup files." -msgstr "Koristi quota zar backup fajlove" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring printer \"%s\"..." -msgstr "Podešavam štampač \"%s\" ..." - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Do not allow execution of any binaries on the mounted\n" -"file system. This option might be useful for a server that has file systems\n" -"containing binaries for architectures other than its own." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Internet connection" -msgstr "Internet konekcija" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"Loading module %s failed.\n" -"Do you want to try again with other parameters?" -msgstr "" -"Podizanje modula %s neuspelo.\n" -"Da li želite pokušate ponovo sa drugim parametrima ?" - -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "Welcome to the Open Source world." -msgstr "Dobrodošli u Svet Open Source-a" - -#: ../../lang.pm:1 -#, c-format -msgid "Bosnia and Herzegovina" -msgstr "Bosna i Hrecegovina" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " -"point\n" -msgstr "" -"Potreban vam je pravi datotečni sistem (ext2/ext3, reiserfs, xfs, ili jfs) " -"za ovu tačku montiranja\n" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "You must enter a host name or an IP address.\n" -msgstr "Molim Vas unesete ime hosta ili IP adresu.\n" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Netherlands" -msgstr "Holandija" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Sending files by FTP" -msgstr "Šaljem fajlove..." - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Internal ISDN card" -msgstr "Interna ISDN kartica" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"There's no known OSS/ALSA alternative driver for your sound card (%s) which " -"currently uses \"%s\"" -msgstr "" -"Ne postoji poznati alternativni OSS/ALSA drajver za vašu zvučnu karticu (%s) " -"koja trenutno koristi \"%s\"" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Title" -msgstr "Naziv" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install & convert Fonts" -msgstr "Instliraj i konvertuj fontove" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WARNING" -msgstr "UPOZORENJE" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing bootloader" -msgstr "Instaliram starter" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "replay" -msgstr "ponovi" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "detected %s" -msgstr "detektovano %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Expect is an extension to the Tcl scripting language that allows interactive " -"sessions without user intervention." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (U.S.)" -msgstr "Devičanska Ostrva (S.A.D)" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Bad backup file" -msgstr "Loše backup-ovana datoteka" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently disabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"Podešavanje deljenja internet konekcije je već završeno.\n" -"Trenutno je onemogućeno.\n" -"\n" -"šta želite da uradite?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter IP address and port of the host whose printers you want to use." -msgstr "Unesite IP adresu i port hosta čije štampače želite da koristite." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Pipe into command" -msgstr "Ubaci u komandu" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Some hardware on your computer needs ``proprietary'' drivers to work.\n" -"You can find some information about them at: %s" -msgstr "" -"Neke hardverske komponente u vašem računaru zahtevaju odgovarajuće drajvere " -"da bi normalno funkcionisale.\n" -"Informacije o njima možete pronaći na: %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Haiti" -msgstr "Haiti" - -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detecting devices..." -msgstr "Detektujem uređaje..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Custom allows you to specify your own day and time. The other options use " -"run-parts in /etc/crontab." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Description of the fields:\n" -"\n" -msgstr "" -"Opis za polja:\n" -"\n" - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Basic options" -msgstr "DrakSec Osnovne Opcije" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the name of the CPU" -msgstr "Ime prizovđača uređaja" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Accept bogus IPv4 error messages" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Prihvati/Odbij IPv4 poruke o greškama." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Refreshing printer data..." -msgstr "Osvežavam podatake o štampaču..." - -#: ../../install2.pm:1 -#, c-format -msgid "You must also format %s" -msgstr "Morate i %s da formatirate" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Be careful: this operation is dangerous." -msgstr "PAŽLJIVO,ova operacija je opasna." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Insert a floppy containing package selection" -msgstr "Ubacite disketu koja sadrži selekciju paketa" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server: " -msgstr "Server:" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Alerts:" -msgstr "Sigurnosni alarmi:" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Sweden" -msgstr "Švedska" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Expect for SSH" -msgstr "Koristi Expect za SSH" - -#: ../../lang.pm:1 -#, c-format -msgid "Poland" -msgstr "Poljska" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Other ports" -msgstr "Ostali portovi" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "number of capture buffers for mmap'ed capture" -msgstr "broj capture buffer-a za mmap'ed capture" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid " - detected" -msgstr "detektovano" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SMBus controllers" -msgstr "SMBus kontroleri" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection timeout (in sec)" -msgstr "Vreme pauze konekcije (u sek.)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Some of the early i486DX-100 chips cannot reliably return to operating mode " -"after the \"halt\" instruction is used" -msgstr "" -"Neki rani i486DX-100 čipovi ne mogu da se pouzdano vrate u operativno stanje " -"posle korišćenja \"halt\" instrukcije" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Croatian" -msgstr "Hrvatski" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Use existing partition" -msgstr "Koristi postojeću particiju" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Unable to contact mirror %s" -msgstr "Ne mogu da kontaktiram miror %s" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Help/_About..." -msgstr "/Pomoć/_O..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remove user directories before restore." -msgstr "Ukloni korisničke direktorijume pre obnavljanja" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are going to configure a remote printer. This needs working network " -"access, but your network is not configured yet. If you go on without network " -"configuration, you will not be able to use the printer which you are " -"configuring now. How do you want to proceed?" -msgstr "" -"Treba da podesite udaljeni štampač. Za to vam je potreban mrežni pristup, " -"ali vaša mreža nije još podešena. Ukoliko nastavite bez mreže konfiguracije, " -"nećete moći da koristite štampač koji sada podešavate. Kako želite da " -"nastavite?" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "CUPS printer configuration" -msgstr "CUPSkonfiguracija za deljenje štampača" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "could not find any font in your mounted partitions" -msgstr "ne mogu da pronađem nijedan font na montiranoj particiji" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "F00f bug" -msgstr "F00f bug" - -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s" -msgstr "XFree %s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Domain Name:" -msgstr "Ime domena:" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Root umask" -msgstr "Root lozinka" - -#: ../../any.pm:1 -#, c-format -msgid "On Floppy" -msgstr "Na disketu" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Reboot by the console user" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore" -msgstr "Obnovi" - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "Server:" -msgstr "Server:" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check if the network devices are in promiscuous mode." -msgstr "" -"ukoliko je podešeno na da, proverite da li su mrežni uređaji u promiscuous " -"modu." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages..." -msgstr "Tražim pakete" - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Please wait, setting up system configuration files on USB key..." -msgstr "Samo momenat, podešavam nivo sigurnosti..." - -#: ../../any.pm:1 -#, c-format -msgid "Init Message" -msgstr "Inicijalna poruka" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Rescue partition table" -msgstr "Spasi tabelu particija" - -#: ../../lang.pm:1 -#, c-format -msgid "Cyprus" -msgstr "Kipar" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Connection complete." -msgstr "Povezivanje završeno." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove from RAID" -msgstr "Ukloni sa RAID-a" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This encryption key is too simple (must be at least %d characters long)" -msgstr "" -"Ova lozinka(enkripcioni ključ) je suviše jednostavna (treba da ima bar %d " -"znakova)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Configuration Wizards" -msgstr "Čarobnjaci za konfiguraciju" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ISDN connection" -msgstr "ISDN konekcija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CD-R / DVD-R" -msgstr "CDROM / DVDROM" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "primary" -msgstr "primarno" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on SMB/Windows server \"%s\", share \"%s\"" -msgstr "na Windows serveru \"%s\", deljeni \"%s\"" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This dialog is used to choose which services you wish to start at boot\n" -"time.\n" -"\n" -"DrakX will list all the services available on the current installation.\n" -"Review each one carefully and uncheck those which are not needed at boot\n" -"time.\n" -"\n" -"A short explanatory text will be displayed about a service when it is\n" -"selected. However, if you are not sure whether a service is useful or not,\n" -"it is safer to leave the default behavior.\n" -"\n" -"!! At this stage, be very careful if you intend to use your machine as a\n" -"server: you will probably not want to start any services that you do not\n" -"need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need.\n" -"!!" -msgstr "" -"Sada možete odabrati koje servise želite da se startaju pri podizanju " -"sistema.\n" -"\n" -"DrakX će prikazati sve dostupni servise na trenutnoj\n" -"instalaciji. Pregledajte ih pažljivo i deselektujte one koji vam neće biti " -"uvek\n" -"potrebni pri podizanju sistema.\n" -"\n" -"Možete dobiti i kratko objašnjenje o servisu selektovanjem\n" -"određenog servisa. Međutim, ukoliko niste sigurni koji od servisa jesu ili\n" -"nisu korisni, sigurnije je ostaviti na default postavkama.\n" -"\n" -"!!Na ovom nivou, budite veoma pažljivi ukoliko želite da koristite vašu " -"mašinu kao\n" -"server: verovatno nećete želeti da startujete nijedan servis koji vam neće\n" -"trebati. Zapamtite da nekoliko servisa može biti opasno ukoliko\n" -"su omogućeni na serveru. Generano govoreći, izaberite samo servise koje ćete " -"stvarno trebati.\n" -"!!" - -#: ../../lang.pm:1 -#, c-format -msgid "Niue" -msgstr "Niue" - -#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Skip" -msgstr "Preskoči" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Activates/Deactivates all network interfaces configured to start\n" -"at boot time." -msgstr "" -"Aktiviranje i deaktiviranje svih mrežnih interfejsa konfigurisanih za " -"start \n" -"pri podizanju sistema." - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "" -"the CPU frequency in MHz (Megahertz which in first approximation may be " -"coarsely assimilated to number of instructions the cpu is able to execute " -"per second)" -msgstr "" -"Frekvencija procesora u MHz (Mega herz koji u prvoj aproksimaciji može biti " -"smatran za broj instrukcija koje procesor može da izvrši u sekundi)" - -#: ../../pkgs.pm:1 -#, c-format -msgid "important" -msgstr "važno" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Mandrake Linux Printer Management Tool" -msgstr "Mandrake Linux Program za upravljanje korisnicima" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Total Progress" -msgstr "Ukupni napredak" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"DrakX will first detect any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" -"found, DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection is not foolproof, DrakX may fail in detecting\n" -"your hard drives. If so, you'll have to specify your hardware by hand.\n" -"\n" -"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" -"want to configure options for it. You should allow DrakX to probe the\n" -"hardware for the card-specific options which are needed to initialize the\n" -"adapter. Most of the time, DrakX will get through this step without any\n" -"issues.\n" -"\n" -"If DrakX is not able to probe for the options to automatically determine\n" -"which parameters need to be passed to the hardware, you'll need to manually\n" -"configure the driver." -msgstr "" -"DrakX sada treba da detektuje IDE uređaje prisutne u vešem računaru.DrakX " -"će \n" -"potražiti PCI SCSI adapter(e). Ukoliko DrakX pronađe SCSI adapter(e) i bude " -"znao koji upravljački program \n" -"(drajver) koristion će ga(ih) automatski instalirati.\n" -"\n" -"Pošto se može desiti da pri detekciji neka komponenta ne bude detektovana \n" -"DrakX će vas upitati da li imate PCI SCSI adapter. Kliknite \"Da\" \n" -"ukoliko znate da imate SCSI adapter na svojoj mašini. Na prikazanoj listi \n" -"moći ćete da izaberete odgovoarajući.\n" -"Kliknite \"Ne\" ukoliko nemate SCSI adaptera u mašini. Ukoliko niste \n" -"sigurni\n" -"proverite na listi detektovanog hardvera selektovanjem \"Pogledaj info o \n" -"hardveru\"i klikom na \"U redu\". Pregledajte\n" -"listu a onda kiknite na \"U redu\" da bi se vratili na pitanje o SCSI \n" -"uređajima.\n" -"\n" -"Ukoliko morate ručno da specificirate vaš PCI SCSI adapter, DrakX će\n" -"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n" -"ispita adapter radi tih opcija. Ovo obično i uspe.\n" -"\n" -"Ukoliko DrakX nije u stanju da ispita opcije koje su potrebne, moraćete da \n" -"sami odredite opcije za drajver.\n" -"Pogledajte i Instalacioni vodič (3 poglavlje, sekcija \"Prikupljanje \n" -"informacija o vašem hardveru\")\n" -"da bi saznali kako da pribavite informacije o parametrima potrebnim za \n" -"hardver,sa svoje Windows instalacije (ukoliko je imate na sistemu),\n" -"dokumenatciju o hardveru, ili sa proizvođačevog \n" -"veb sajta (ukoliko imate pristup internetu)." - -#: ../../lang.pm:1 -#, c-format -msgid "Aruba" -msgstr "Aruba" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Users" -msgstr "Korisnici" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing bootloader..." -msgstr "Pripremam starter..." - -#: ../../../move/move.pm:1 -#, c-format -msgid "Enter your user information, password will be used for screensaver" -msgstr "" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway (e.g. %s)" -msgstr "Gateway (e.g. %s)" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "The passwords do not match" -msgstr "Nepodudarnost lozinki" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Examples for correct IPs:\n" -msgstr "Primeri pravilnih IP adresa:\n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please choose the media for backup." -msgstr "" -"Izaberite\n" -"medij za backup." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Frequency (MHz)" -msgstr "Frekvenicja (MHz)" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"To use this saved packages selection, boot installation with ``linux " -"defcfg=floppy''" -msgstr "" -"Da bi koristili ovaj izbor za čuvanje selekcije paketa, izaberite " -"instalaciju sa ``linux defcfg=floppy''" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the number of the processor" -msgstr "Broj procesora" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Hardware clock set to GMT" -msgstr "Vaš sistemski (BIOS) časovnik je podešen na GMT" - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "Do you want to start a new configuration ?" -msgstr "Da li hoćete da testirate konfiguraciju?" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Give a file name" -msgstr "Odredite ime fajla" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the port that your printer is connected to." -msgstr "Izaberite port na koji je vaš računar povezan." - -#: ../../standalone/livedrake:1 -#, c-format -msgid "Change Cd-Rom" -msgstr "Promeni Cd-Rom" - -#: ../../lang.pm:1 -#, c-format -msgid "Paraguay" -msgstr "Paragvaj" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "Configuration is complete, do you want to apply settings ?" -msgstr "Koju XFree konfiguraciju želite da imate ?" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use Incremental/Differential Backups (do not replace old backups)" -msgstr "" -"Koristi Inkrementalni Backup-ove (ne zamenjuj ih sa starim backup-ovima)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/dhcpd.conf:\n" -" \tTo net boot clients, each client needs a dhcpd.conf entry, " -"assigning an IP \n" -" \taddress and net boot images to the machine. drakTermServ helps " -"create/remove \n" -" \tthese entries.\n" -"\t\t\t\n" -" \t(PCI cards may omit the image - etherboot will request the correct " -"image. \n" -"\t\t\tYou should also consider that when etherboot looks for the images, it " -"expects \n" -"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \tA typical dhcpd.conf stanza to support a diskless client looks " -"like:" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "There's no known driver for your sound card (%s)" -msgstr "Ne postoji poznati drajver za vašu zvučnu karticu (%s)" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "force" -msgstr "silom" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Exit" -msgstr "Izlaz" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"NOTE: Depending on the printer model and the printing system up to %d MB of " -"additional software will be installed." -msgstr "" -"NAPOMENA: U zavisnosti od modela štampača i sistema za štampanje potrebno je " -"još %d MB dodatnog softera da se instalira." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"You don't have any configured interface.\n" -"Configure them first by clicking on 'Configure'" -msgstr "" -"Vi nemate ni jedan interfejs koji je podešen.\n" -"Morate ih prvo podesite klikom na 'Configure'" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Estonian" -msgstr "Estonski" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Apache is a World Wide Web server. It is used to serve HTML files and CGI." -msgstr "" -"Apache je WWW server. On se koristi da opslužuje HTML fajlove\n" -"i CGI." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Enter your CD Writer device name\n" -" ex: 0,1,0" -msgstr "" -"Unesite ime vašeg CD Writer uređaja\n" -" ex: 0,1,0" - -#: ../../standalone/draksec:1 -#, c-format -msgid "ALL" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Clients" -msgstr "Dodaj/Izbriši Klijente" - -#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Choose the network interface" -msgstr "Izaberite mrežni interfejs" - -#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Unknown Model" -msgstr "Nepoznati Model" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "CD/DVD burners" -msgstr "CD/DVD rezači" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Partition booted by default\n" -" (for MS-DOS boot, not for lilo)\n" -msgstr "" -"Boot particija po default-u\n" -" (za podizanje MS-DOSa, ne za lilo)\n" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to read the file" -msgstr "" - -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "choose image" -msgstr "izaberite sliku" - -#: ../../network/shorewall.pm:1 -#, c-format -msgid "Firewalling configuration detected!" -msgstr "Detektovana Firewalling konfiguracija" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection name" -msgstr "Ime konekcije" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"x coordinate of text box\n" -"in number of characters" -msgstr "" -"x koordinata tekst boksa\n" -"u broju karaktera" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You may not be able to install lilo (since lilo doesn't handle a LV on " -"multiple PVs)" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Updating package selection" -msgstr "Ažuriranje selekcije paketa" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount the loopback file %s?" -msgstr "Gde biste da montirate loopback fajl %s?" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"The floppy has been successfully generated.\n" -"You may now replay your installation." -msgstr "" -"Disketa je uspešno kreirana.\n" -"Sada možete ponoviti vašu instalaciju." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use CD-R/DVD-R to backup" -msgstr "Koristi CD/DVDROM za backup" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the number of buttons the mouse has" -msgstr "Broj procesora" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Replay" -msgstr "Ponavljanje" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup other files" -msgstr "Backup-uj ostale fajlove" - -#: ../../install_steps.pm:1 -#, c-format -msgid "No floppy drive available" -msgstr "Nepristupačan disketni uređaj" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files are corrupted" -msgstr "Backup fajlovi su korumpirani" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "TV norm:" -msgstr "TV sistem :" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cpuid family" -msgstr "Cpuid familija" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "32 MB" -msgstr "32 MB" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: thin" -msgstr "tip: %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (new)" -msgstr "Litvanski AZERTY(novi)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "yes means the arithmetic coprocessor has an exception vector attached" -msgstr "sa znači da aritmetički koprocesor ima prikačen dodatni vektor" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You've selected a software RAID partition as root (/).\n" -"No bootloader is able to handle this without a /boot partition.\n" -"Please be sure to add a /boot partition" -msgstr "" -"Izabrali ste softversku RAID particiju kao root (/).\n" -"Nijedan starter ne može da radi sa tim bez /boot particije.\n" -"Zato treba da dodate /boot particiju" - -#: ../../any.pm:1 -#, c-format -msgid "Other OS (MacOS...)" -msgstr "Drugi OS-ovi (MacOS,BSD,...)" - -#: ../../mouse.pm:1 -#, c-format -msgid "To activate the mouse," -msgstr "Da bi mogli da aktivirate miša" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing up the network" -msgstr "Pristupam mrežu" - -#: ../../common.pm:1 -#, c-format -msgid "Screenshots will be available after install in %s" -msgstr "Snimci će biti dostupni nakon instalacije u %s" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"More than one Microsoft partition has been detected on your hard drive.\n" -"Please choose which one you want to resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." -msgstr "" -"Jedna ili više Microsoft Windows particija je detektovano \n" -"na hard disku. Izaberite koju od njih želite da smanjite da bi instalirali\n" -"novi Mandrake Linux operativni sistem.\n" -"\n" -"Svaka particija je ispisana na sledeći način: \"Ime Linux-a\",\"Ime Windows-a" -"\"\n" -"\"Kapacitet\".\n" -"\n" -"\"Ime Linux-a\" je kodirano na sledeći način: \"tip hard diska\", \"broj " -"hard diska\",\n" -"\"broj particije\" (na primer, \"hda1\").\n" -"\n" -"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID uređaj i \"sd\"\n" -"ukoliko je SCSI hard disk.\n" -"\n" -"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard " -"diskovima:\n" -"\n" -" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n" -"\n" -" * \"b\" znači \"slave hard disk na primarnom IDE kontroloeru\",\n" -"\n" -" * \"c\" znači \"master hard disk na sekundranom IDE kontroloeru\",\n" -"\n" -" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n" -"\n" -"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", a \"b\" znači " -"\"sekundarni hard disk \", itd.\n" -"\n" -"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi disk\n" -"ili particija se zove \"C:\")." - -#: ../../lang.pm:1 -#, c-format -msgid "Tanzania" -msgstr "Tanzanija" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Computing FAT filesystem bounds" -msgstr "Proračunavam granice FAT datotečnog sistema" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Backup Sources: \n" -msgstr "" -"\n" -"Backup Izvori: \n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "custom" -msgstr "Izbor po želji" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Content of the file" -msgstr "Sadržaj datotekse" - -#: ../../any.pm:1 -#, c-format -msgid "Authentication LDAP" -msgstr "LDAP Autentifikacija" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "in order to keep %s" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Let me pick any driver" -msgstr "Doozvoli da izaberem bilo koji uređaj" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "transmitted" -msgstr "prebačeno" - -#: ../../lang.pm:1 -#, c-format -msgid "Palestine" -msgstr "Palestina" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "RAID md%s\n" -msgstr "RAID md%s\n" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated strings" -msgstr "%d odovojeni stringovi sa zarezom" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid " isdn" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Here is the full list of keyboards available" -msgstr "Ovde je predstavljena cela lista dostupnih tastatura" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Theme name" -msgstr "Ime teme" - -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Help" -msgstr "/_Pomoć" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Choosing an arbitrary driver" -msgstr "Biram odgovarajući drajver" - -#: ../../lang.pm:1 -#, c-format -msgid "Cook Islands" -msgstr "Kukova Ostrva" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Here you can choose whether the scanners connected to this machine should be " -"accessable by remote machines and by which remote machines." -msgstr "" -"Ovde možete izabrati da li želite da skeneri na ovoj mašini treba da budu " -"dostupni na drugim udaljenim mašinama i na kojim udaljenim mašinama." - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the width of the progress bar" -msgstr "sirina trake sa prikazom napretka" - -#: ../../fs.pm:1 -#, c-format -msgid "Formatting partition %s" -msgstr "Formatiranje particije %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hostname required" -msgstr "Potrebno je ime hosta" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselect fonts installed" -msgstr "Deselektovani fontovi instalirani" - -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" -msgstr "Točkić" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Submit kernel version" -msgstr "Verzija kernela" - -#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 -#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 -#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 -#: ../../standalone/drakperm:1 ../../standalone/draksec:1 -#: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Cancel" -msgstr "Poništi" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for configured scanners ..." -msgstr "Tražim podešene skenere ..." - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Videocard" -msgstr "Video kartica" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tBackups use tar and bzip2\n" -msgstr "\tBackup koristi tar i bzip2\n" - -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Remove Selected" -msgstr "Ukloni Selektovano" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _modems" -msgstr "/Autodetekcija _modema" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove printer" -msgstr "Ukloni štampač" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Last Log" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Which services would you like to allow the Internet to connect to?" -msgstr "Koji servise želite da budu dostupni preko Inerneta?" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Connection Type" -msgstr "Tip konekcije :" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"Welcome to the mail configuration utility.\n" -"\n" -"Here, you'll be able to set up the alert system.\n" -msgstr "" -"Dobrodošli u alat za konfiguraciju el.pošte\n" -"\n" -"Ovde možete da podesite alarmni sistem.\n" - -#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakperm:1 -#, c-format -msgid "Other" -msgstr "Drugo" - -#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 -#, c-format -msgid "Default" -msgstr "Podrazumevano" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Button 2 Emulation" -msgstr "Emulacija 2 tastera" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Please enter a package name." -msgstr "Odredite korisničko ime" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Run chkrootkit checks" -msgstr "ukoliko je podešeno na da, pokrenite chkrootkit provere." - -#: ../../standalone/drakfont:1 -#, c-format -msgid "type1inst building" -msgstr "kreiram type1inst" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Abiword" -msgstr "Abiword" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "choose image file" -msgstr "izaberite sliku" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "X server" -msgstr "X server" - -#: ../../any.pm:1 -#, c-format -msgid "Domain Admin User Name" -msgstr "Admin Korisničko ime Domena" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "There was an error while scanning for TV channels" -msgstr "Greška pri skeniranju TV kanala" - -#: ../../keyboard.pm:1 -#, c-format -msgid "US keyboard (international)" -msgstr "US tastatura (internacionalna)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Not installed" -msgstr "Nije instalirano" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Both Alt keys simultaneously" -msgstr "Oba Shift tastera istovremeno" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "LAN connection" -msgstr "LAN konekcija" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/-" -msgstr "/Fajl/-" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Italian" -msgstr "Italijanski" - -#: ../../interactive.pm:1 -#, c-format -msgid "Basic" -msgstr "Osnovno" - -#: ../../install_messages.pm:1 -#, c-format -msgid "http://www.mandrakelinux.com/en/92errata.php3" -msgstr "http://www.mandrakelinux.com/en/92errata.php3" - -#: ../../lang.pm:1 -#, c-format -msgid "Honduras" -msgstr "Honduras" - -#: ../../help.pm:1 -#, c-format -msgid "pdq" -msgstr "" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO" -msgstr " IO kartice" - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "Samba server" -msgstr "Samba Server" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"\n" -"This special Bootstrap\n" -"partition is for\n" -"dual-booting your system.\n" -msgstr "" -"\n" -"Ovo je specijalna Bootstrap\n" -"particija i koristi se\n" -"dual-booting vašeg sistema.\n" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"Please choose for each step whether it will replay like your install, or it " -"will be manual" -msgstr "" -"izaberite za svaki korak da li će biti istovetan i automatizovan iliće biti " -"ručno podešavan" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"You can also decide here whether scanners on remote machines should be made " -"available on this machine." -msgstr "" -"Takođe možete odlučiti da li želite da skeneri na udaljenim mašinama budu " -"automatski dostupni na ovoj mašini." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by FTP.\n" -msgstr "\t-Mreža preko FTP.\n" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Reports check result to tty" -msgstr "ukoliko je podešeno na da, izveštaj o proveri pošaljite na tty." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You must enter a device or file name!" -msgstr "Morate uneti uređaj ili ime fajla!" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Quit" -msgstr "/_Kraj" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphics memory: %s kB\n" -msgstr "Memorija na grafičkoj kartici: %s kB\n" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"This program is free software; you can redistribute it and/or modify\n" -"it under the terms of the GNU General Public License as published by\n" -"the Free Software Foundation; either version 2, or (at your option)\n" -"any later version.\n" -"\n" -"This program is distributed in the hope that it will be useful,\n" -"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -"GNU General Public License for more details.\n" -"\n" -"You should have received a copy of the GNU General Public License\n" -"along with this program; if not, write to the Free Software\n" -"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -msgstr "" -" Ovaj program je bespaltan; možete ga redistribuirati i/ili menjati\n" -" pod uslovima GNU General Public License kako je objavljeno\n" -" u Free Software Fondaciji; ili verziji 2, ili (u vašem slučaju)\n" -" bilo kojoj novijoj verziji.\n" -"\n" -" Ovaj program je distribuiran u nadi da će biti od koristi,\n" -" sli BEZ IKAKVIH GARANCIJA; čak i bez garancije za\n" -" KORISNOST i PRAKTIČNU UPOTREBU. Pogledajte\n" -" GNU Opštu Javnu Licencu za više detalja.\n" -"\n" -" Trebali bi da mate kopiju GNU Opšte Javne Licence\n" -" zajedno sa ovim programom; ukoliko je nemate, pišite nam na adresu Free " -"Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" - -#: ../../any.pm:1 -#, c-format -msgid "access to compilation tools" -msgstr "pristup alatima za kompajliranje" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Global statistics" -msgstr "Statistika" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to restore..." -msgstr "Izaberite podatke za obnavljanje..." - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "" -"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " -"enough)\n" -"at the beginning of the disk" -msgstr "" -"Ukoliko planirate da koristite aboot, ostavite prazan prostor (2048 " -"sektorana početku \n" -"diska)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Standard test page" -msgstr "Standardna test stranica" - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "Time Zone" -msgstr "Vremenska zona" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Create" -msgstr "Kreiraj" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "What" -msgstr "Šta" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error ordering packages:" -msgstr "Greška u listi paketa:" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (BDS)" -msgstr "Bugarski (BDS)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Server" -msgstr "Deaktiviraj Server" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem encryption key" -msgstr "Ključ za enkripciju fajl sistema" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Gujarati" -msgstr "Gujarati" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" While you can use a pool of IP addresses, rather than setup a " -"specific entry for\n" -" a client machine, using a fixed address scheme facilitates using the " -"functionality\n" -" of client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -" Note: The '#type' entry is only used by drakTermServ. Clients can " -"either be 'thin'\n" -" or 'fat'. Thin clients run most software on the server via xdmcp, " -"while fat clients run \n" -" most software on the client machine. A special inittab, %s is\n" -" written for thin clients. System config files xdm-config, kdmrc, and " -"gdm.conf are \n" -" modified if thin clients are used, to enable xdmcp. Since there are " -"security issues in \n" -" using xdmcp, hosts.deny and hosts.allow are modified to limit access " -"to the local\n" -" subnet.\n" -"\t\t\t\n" -" Note: The '#hdw_config' entry is also only used by drakTermServ. " -"Clients can either \n" -" be 'true' or 'false'. 'true' enables root login at the client " -"machine and allows local \n" -" hardware configuration of sound, mouse, and X, using the 'drak' " -"tools. This is enabled \n" -" by creating separate config files associated with the client's IP " -"address and creating \n" -" read/write mount points to allow the client to alter the file. Once " -"you are satisfied \n" -" with the configuration, you can remove root login privileges from " -"the client.\n" -"\t\t\t\n" -" Note: You must stop/start the server after adding or changing " -"clients." -msgstr "" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"Please choose the first number of the 10-range you wish to edit,\n" -"or just hit Enter to proceed.\n" -"Your choice? " -msgstr "" -"Izaberite prvi broj od 10 koje želite da editujete,\n" -"ili samo kliknite na Enter da bi nastavili.\n" -"Vaš izbor? " - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\n" -" Copyright (C) 2002 by MandrakeSoft \n" -"\tStew Benedict sbenedict@mandrakesoft.com\n" -"\n" -msgstr "" -"\n" -" Sva prava (C) 2002 MandrakeSoft \n" -"\tStew Benedict sbenedict@mandrakesoft.com\n" -"\n" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Save theme" -msgstr "Sačuvajte temu" - -#: ../../lang.pm:1 -#, c-format -msgid "Brazil" -msgstr "Brazil" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install" -msgstr "Autoinstalacija" - -#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Network Configuration Wizard" -msgstr "čarobnjak za podešavanje mreže" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removable media automounting" -msgstr "Automontiranje prenosivog medija" - -#: ../../services.pm:1 -#, c-format -msgid "Printing" -msgstr "Štampanje" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Enter the directory to save:" -msgstr "Unesite direktorijum da bi sačuvali:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"There are no printers found which are directly connected to your machine" -msgstr "Nema štampača koji su direktno povezani na vašu mašinu" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Create a new partition" -msgstr "Kreiraj novu particiju" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Driver:" -msgstr "Drajver:" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "unknown" -msgstr "Nepoznato" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use fdisk" -msgstr "Koristi fdisk" - -#: ../../mouse.pm:1 -#, c-format -msgid "MOVE YOUR WHEEL!" -msgstr "pomerite točkić !" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "sent: " -msgstr "poslano: " - -#: ../../network/network.pm:1 -#, c-format -msgid "Automatic IP" -msgstr "Automatski IP" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"%s\" to reboot the system. The first thing you\n" -"should see after your computer has finished doing its hardware tests is the\n" -"bootloader menu, giving you the choice of which operating system to start.\n" -"\n" -"The \"%s\" button shows two more buttons to:\n" -"\n" -" * \"%s\": to create an installation floppy disk that will automatically\n" -"perform a whole installation without the help of an operator, similar to\n" -"the installation you just configured.\n" -"\n" -" Note that two different options are available after clicking the button:\n" -"\n" -" * \"%s\". This is a partially automated installation. The partitioning\n" -"step is the only interactive procedure.\n" -"\n" -" * \"%s\". Fully automated installation: the hard disk is completely\n" -"rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing a number of similar machines.\n" -"See the Auto install section on our web site for more information.\n" -"\n" -" * \"%s\"(*): saves a list of the packages selected in this installation.\n" -"To use this selection with another installation, insert the floppy and\n" -"start the installation. At the prompt, press the [F1] key and type >>linux\n" -"defcfg=\"floppy\" <<.\n" -"\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" -msgstr "" -"I stigli ste do kraja. Instalacija je sada završena i vaš GNU/Linux sistem " -"je \n" -"spreman za upotrebu. Samo kliknite na \"Sledeći -\" da bi restartovali " -"sistem. Možete pokrenuti\n" -"GNU/Linux ili Windows, šta god više preferirate (ukoliko imate instalirana " -"dva sistema), čim\n" -"se računar ponovo pokrene.\n" -"\n" -"Taster Napredno \"%s\" (samo u Ekspert modu) prikazuje još dva tastera za:\n" -"\n" -" * \"kreiranje auto-instalacione diskete\": radi kreiranja instalacionog " -"flopi diska\n" -"koji će automatski pokrenuti celu instalaciju bez pomoći operatora\n" -", slično ovoj instalaciji koju ste upravo izveli.\n" -"\n" -" Možete primetiti da su dve različite opcije dostupne nakon pritiska na " -"taster:\n" -"\n" -" * \"Sa ponavljanjem\". Ovo je delom automatizirana instalacija jer korak " -"sa\n" -"particioniranjem diska ostaje interaktivan (samo on).\n" -"\n" -" * \"Automatizovano\". Potpuno automatizovana instalacija: hard disk se u " -"potpunosti\n" -"formatizuje, i svi podaci će biti izgubljeni.\n" -"\n" -" Ova opcija je veoma korisna ukoliko izvodite veliki broj sličnih " -"instalacija\n" -"na većem broju mašina. Pogledajte sekciju o auto instalaciji na našem web " -"sajtu.\n" -"\n" -" * \"Sačuvaj selekciju paketa\"(*) : snima selekciju paketa koji ste\n" -"napravili u ovoj instalaciji. Tako, da kada budete izvodili drugu " -"instalaciju, ubacite disketu\n" -"i pokrenete pomoćni ekran pritiskom na\n" -"[F1] taster, i zahtevom za >>linux defcfg=\"floppy\"<<.\n" -"\n" -"(*) Morate da iamte FAT-formatiranu disketu (da bi je formatirali pod GNU/" -"Linux-om, ukucajte\n" -"\"mformat a:\")" - -#: ../../lang.pm:1 -#, c-format -msgid "Moldova" -msgstr "Moldavija" - -#: ../../mouse.pm:1 -#, c-format -msgid "Kensington Thinking Mouse" -msgstr "Kensington Thinking Mouse" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuration of a remote printer" -msgstr "Podešavanje udaljenog štampača" - -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "An online platform to respond to enterprise support needs." -msgstr "" -"Tu je online platforma koja treba da odgovori poebnim i specifičnim " -"potrebama kompanija" - -#: ../../network/network.pm:1 -#, c-format -msgid "URL should begin with 'ftp:' or 'http:'" -msgstr "Url treba da počinje 'ftp:' ili 'http:'" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Oriya" -msgstr "Sirija" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Add a new rule at the end" -msgstr "Dodaj novo pravilo na kraju" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "LiLo and Bootsplash themes installation successful" -msgstr "Instalacija LiLo-a i Bootsplash tema uspela" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can also decide here whether printers on remote machines should be " -"automatically made available on this machine." -msgstr "" -"Takođe možete odlučiti da li želite da štampači na udaljenim mašinama budu " -"automatski dostupni na ovoj mašini." - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"You may now provide options to module %s.\n" -"Options are in format ``name=value name2=value2 ...''.\n" -"For instance, ``io=0x300 irq=7''" -msgstr "" -"Možete navesti njegove opcije za modul %s.\n" -"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n" -"Na primer, ``io=0x300 irq=7''" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without writing the partition table?" -msgstr "Kraj bez snimanja promena u tabele particija?" - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetScroll" -msgstr "Genius NetScroll" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Hard Drive" -msgstr "na Hard Disk" - -#: ../../standalone.pm:1 -#, c-format -msgid "Installing packages..." -msgstr "Instaliram pakete..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dutch" -msgstr "Danski" - -#: ../../lang.pm:1 -#, c-format -msgid "Angola" -msgstr "Angola" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "The following packages need to be installed:\n" -msgstr "Sledeći paketi treba da budu instalirani:\n" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "service setting" -msgstr "podešavanje servisa" - -#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Custom" -msgstr "Izbor po želji" - -#: ../../lang.pm:1 -#, c-format -msgid "Latvia" -msgstr "Letonija" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "File is already used by another loopback, choose another one" -msgstr "Fajl se već koristi od strane drugog loopback-a,izaberite drugi" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read-only" -msgstr "Samo-čitanje" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Enable/Disable name resolution spoofing protection. If\n" -"\"alert\" is true, also reports to syslog." -msgstr "" -"Argumenti: (arg, alert=1)\n" -"\n" -"Omogući/Onemogući zaštitu za name resolution spoofing. Ako je\n" -"\\fIalert\\fP istinit, i to prijavite u syslog." - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No known driver" -msgstr "Nema poznatog drajvera" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "1 MB" -msgstr "1 MB" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"If it is not the one you want to configure, enter a device name/file name in " -"the input line" -msgstr "" -"Ukoliko to nije onaj koji želite da podesite, unesite ime/ime fajla uređaja " -"u liniju za unos" - -#: ../../standalone/draksound:1 -#, c-format -msgid "" -"No Sound Card has been detected on your machine. Please verify that a Linux-" -"supported Sound Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" -"Zvučna kartica nije detektovana na vašoj mašini. Proverite da li Linux-" -"supported zvučna kartica pravilno priključena.\n" -"\n" -"\n" -"Možete posetiti našu bazu podržanog hardvera na:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Configure Local Area Network..." -msgstr "Podesi lokalni mrežu..." - -#: ../../../move/move.pm:1 -#, c-format -msgid "" -"The USB key seems to have write protection enabled. Please\n" -"unplug it, remove write protection, and then plug it again." -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Launch the sound system on your machine" -msgstr "Pokreće sistem za zvuk na vašoj mašini" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Verify checksum of the suid/sgid files" -msgstr "ukoliko je podešeno na da, proverite checksum za suid/sgid fajlove." - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Run some checks against the rpm database" -msgstr "ukoliko je podešeno na da, pokrenite proveru rpm baze podataka." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Execute" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Preparing printer database..." -msgstr "Pripremam bazu podataka za štampače..." - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Information" -msgstr "Informacije" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "No network card" -msgstr "Nije pronađena mrežna kartica" - -#: ../../mouse.pm:1 -#, c-format -msgid "3 buttons" -msgstr "3 tastera" - -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 -#, c-format -msgid "Which filesystem do you want?" -msgstr "Koju datotečni sistem želite ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Malta" -msgstr "Malta" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Detailed information" -msgstr "Detaljne informacije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printer default settings\n" -"\n" -"You should make sure that the page size and the ink type/printing mode (if " -"available) and also the hardware configuration of laser printers (memory, " -"duplex unit, extra trays) are set correctly. Note that with a very high " -"printout quality/resolution printing can get substantially slower." -msgstr "" -"default opcije za štampač\n" -"\n" -"Proverite da li su veličina papira i vrsta tinte/mod štampanja (ukoliko je " -"dostupan) kao i hardverska konfiguracija za laserske štampače (memorija, " -"duplex jedinica, dodatne kasete) podešeni ispravno. Imajte na umu da pri " -"visokom kvalitetu štampe/rezoluciji štampe štampanje može biti značajnije " -"usporeno." - -#: ../../install_any.pm:1 -#, c-format -msgid "This floppy is not FAT formatted" -msgstr "Ova disketa nije formatirana sa FAT sistemom" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Configuring network" -msgstr "Podešavanje mreže" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This option will save files that have changed. Exact behavior depends on " -"whether incremental or differential mode is used." -msgstr "" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Graphic Card" -msgstr "Grafička kartica" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Resizing Windows partition" -msgstr "Proračunavam granice Windows fajl-sistema" - -#: ../../lang.pm:1 -#, c-format -msgid "Cameroon" -msgstr "Kamerun" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 1 (optional)" -msgstr "Provajderov dns 1 (opciono)" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You can now partition %s.\n" -"When you are done, don't forget to save using `w'" -msgstr "" -"Sada možete particionirati vaš %s hard disk uređaj\n" -"Kada završite,ne zaboravite da potvrdite koristeći `w'" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Saami (swedish/finnish)" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Close" -msgstr "Zatvori" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"\"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list." -msgstr "" -"\"Država\": proverava trenutni izbor zemlje. Ukoliko se ne nalazite u ovojs\n" -"državi, kliknite na taster i i izaberite drugu." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Calendar" -msgstr "Kalendar" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Restore Selected\n" -"Catalog Entry" -msgstr "" -"Obnovi izabrane\n" -"Unose u katalogu" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To use a remote lpd printer, you need to supply the hostname of the printer " -"server and the printer name on that server." -msgstr "" -"Da bi koristili udaljeni lpd štampač, morate da obezbedite ime hosta za " -"server za štampanje kao i ime štampača na tom serveru." - -#: ../../lang.pm:1 -#, c-format -msgid "Iceland" -msgstr "Island" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Network & Internet Configuration" -msgstr "Podešavanje mreže" - -#: ../../common.pm:1 -#, c-format -msgid "consolehelper missing" -msgstr "consolehelper nedostaje" - -#: ../../services.pm:1 -#, c-format -msgid "stopped" -msgstr "zaustavljeno" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Whether the FPU has an irq vector" -msgstr "Gde god FPU ima irq vektor" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Ext2" -msgstr "Ext2" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Expand Tree" -msgstr "Proširi stablo" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"The old \"%s\" driver is blacklisted.\n" -"\n" -"It has been reported to oops the kernel on unloading.\n" -"\n" -"The new \"%s\" driver'll only be used on next bootstrap." -msgstr "" -"Stari \"%s\" drajver je na crnoj listi.\n" -"\n" -"Prijavljeno je da opstruiše kernel pri restartovanju.\n" -"\n" -"Novi \"%s\" drajver će biti korišćen samo pri sledećem startanju sistema." - -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Expert Mode" -msgstr "Ekspert mod" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer options" -msgstr "Opcije štampača" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Local Network adress" -msgstr "Adresa Lokalne Mreže" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup your System files. (/etc directory)" -msgstr "Sačuvajte svoje Sistemske fajlove ( /etc direktorijum )" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the user umask." -msgstr "" -"Argumenti: (umask)\n" -"\n" -"Podešavanje korisničkog umask." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You now have the opportunity to download updated packages. These packages\n" -"have been updated after the distribution was released. They may\n" -"contain security or bug fixes.\n" -"\n" -"To download these packages, you will need to have a working Internet \n" -"connection.\n" -"\n" -"Do you want to install the updates ?" -msgstr "" -"Sada imate mogućnost da download-ujete ažurirane pakete koji su\n" -"kreirani nakon izlaska distribucije.\n" -"Oni mogu sadržavati ispravke grešaka i sigurnosnih rupa\n" -"\n" -"Da bi skinuli ove pakete morate da imate podešenu Internet konekciju.\n" -"\n" -"da li želite da instalirate update-ove ?" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Samba Server" -msgstr "Samba Server" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Australian Optus cable TV" -msgstr "Australijska Optus kablovska TV" - -#: ../../install_steps_newt.pm:1 -#, c-format -msgid "" -" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " -msgstr "" -"<Tab>/<Alt-Tab> kret. između elemenata | <Space> izbor | <F12> sledeći ekran" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet:" -msgstr "Subnet:" - -#: ../../lang.pm:1 -#, c-format -msgid "Zimbabwe" -msgstr "Zimbabve" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "When" -msgstr "Kada" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"You need the Alcatel microcode.\n" -"Download it at:\n" -"%s\n" -"and copy the mgmt.o in /usr/share/speedtouch" -msgstr "" -"Vama je potreban alcatel mikro mod.\n" -"MOžete ga Download-ovati sa\n" -"%s\n" -"and copy the mgmt.o in /usr/share/speedtouch" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hour" -msgstr "Čas" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Second DNS Server (optional)" -msgstr "Drugi DNS Server (opcija)" - -#: ../../lang.pm:1 -#, c-format -msgid "Finland" -msgstr "Finska" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Color depth: %s\n" -msgstr "Broj boja: %s\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It must be upgraded" -msgstr "Ne možete deselektovati ovaj paket.On mora biti ažuriran" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Loading from floppy" -msgstr "Učitavam sa diskete" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "Timezone - DrakClock" -msgstr "" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Enable/Disable the logging of IPv4 strange packets." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući prijavljivanje IPv4 strange paketa." - -#: ../../lang.pm:1 -#, c-format -msgid "Slovenia" -msgstr "Slovenija" - -#: ../../standalone/mousedrake:1 -#, fuzzy, c-format -msgid "Mouse test" -msgstr "Mouse Systems" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Drakperm is used to see files to use in order to fix permissions, owners, " -"and groups via msec.\n" -"You can also edit your own rules which will owerwrite the default rules." -msgstr "" -"Drakperm se koristi da videli fajlove u cilju podešavanja dozvola, vlasnika " -"i grupa preko msec.\n" -"VI takođe možete da editujete svoja sopstvena pravila koja će biti iznad " -"default pravila." - -#: ../../any.pm:1 -#, c-format -msgid "" -"Enter a user\n" -"%s" -msgstr "" -"Unesi korisnika\n" -"%s" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"- PCI and USB devices: this lists the vendor, device, subvendor and " -"subdevice PCI/USB ids" -msgstr "" -"- PCI i USB uređaji : ovo prikazuje proizvođača, uređaj, podproizvođača i " -"brojeve PCI/USB uređaja" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "ProgressBar color selection" -msgstr "Izbor boje za traku koja prikazuje stanje napredovanja" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Here are the entries on your boot menu so far.\n" -"You can create additional entries or change the existing ones." -msgstr "" -"Ovo su postavljne opcije.\n" -"Možete dodati nove ili izmeniti stare." - -#: ../../help.pm:1 -#, c-format -msgid "/dev/hda" -msgstr "/dev/hda" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/hdb" -msgstr "/dev/hdb" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "" -"Application Name\n" -"or Full Path:" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Runs commands scheduled by the at command at the time specified when\n" -"at was run, and runs batch commands when the load average is low enough." -msgstr "" -"Pokreće komande zakazane at komandom,kao i batch komande kao je " -"opterećenost\n" -"sistema mala." - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Radio support:" -msgstr "Podrška za radio :" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing SANE packages..." -msgstr "Instaliram SANE pakete..." - -#: ../../any.pm:1 -#, c-format -msgid "LDAP" -msgstr "LDAP" - -#: ../../bootloader.pm:1 -#, c-format -msgid "SILO" -msgstr "SILO" - -#: ../../diskdrake/removable.pm:1 -#, c-format -msgid "Change type" -msgstr "Promena tipa" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", USB printer #%s" -msgstr ", USB štampač #%s" - -#: ../../any.pm:1 -#, c-format -msgid "SILO Installation" -msgstr "SILO instalacija" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Congratulations, installation is complete.\n" -"Remove the boot media and press return to reboot.\n" -"\n" -"\n" -"For information on fixes which are available for this release of Mandrake " -"Linux,\n" -"consult the Errata available from:\n" -"\n" -"\n" -"%s\n" -"\n" -"\n" -"Information on configuring your system is available in the post\n" -"install chapter of the Official Mandrake Linux User's Guide." -msgstr "" -"Čestitamo, instalacija je završena.\n" -"Izvadite disketu iz drajva i pritisnite <Enter> da se računar resetuje.\n" -"\n" -"\n" -"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n" -"Mandrake Linux Linux-a, pročitajte deo 'Errata' koji možete naći na\n" -"\n" -"\n" -"%s\n" -"\n" -"\n" -"Informacije o konfigurisanju vašeg sistema možete naći u post-instalacionom\n" -"poglavlju zvaničnog Mandrake Linux 'Vodiča za korisnike'." - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "Enable Network Time Protocol" -msgstr "Oblnovi preko Mrežnog protokola: %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "paranoid" -msgstr "paranoidni" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Do not send mails when unneeded" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Your scanner(s) will not be available on the network." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Send mail report after each backup to:" -msgstr "Pošalji mail izveštaj nakon svakog backup/a na :" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"This command you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications. But here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"Ova komanda vam je dostupna i u polju \"Konade za štampanje\" dijaloga za " -"štampanje u većini aplikacija. Ali u tom slučaju nemojte da upisujete ime " -"fajla jer je ono već dodeljeno od strane aplikacije.\n" - -#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolution" -msgstr "Rezolucija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print to a SMB printer, you need to provide the SMB host name (Note! It " -"may be different from its TCP/IP hostname!) and possibly the IP address of " -"the print server, as well as the share name for the printer you wish to " -"access and any applicable user name, password, and workgroup information." -msgstr "" -"Da biste mogli da štampate na SMB štampaču, treba da navedete\n" -"ime hosta (koje nije uvek isto kao TCP/IP ime mašine);\n" -"IP adresu štampačevog servera; deljeno ime štampača kome pristupate,\n" -"kao i potrebna korisnička imena i lozinke." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -" Enabling su only from members of the wheel group or allow su from any user." -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Omogućavanje su samo za korisnije wheel grupe ili za svakog korisnika." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "reconfigure" -msgstr "ponovo podesi" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." -msgstr "" -"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,\n" -"ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do " -"blokiranja računara." - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Shell timeout" -msgstr "Pauza pri startanju kernela" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Xinetd Service" -msgstr "Xinetd Servis" - -#: ../../any.pm:1 -#, c-format -msgid "access to network tools" -msgstr "pristup mrežnim alatima" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Firmware-Upload for HP LaserJet 1000" -msgstr "" - -#: ../advertising/03-software.pl:1 -#, c-format -msgid "" -"And, of course, push multimedia to its limits with the very latest software " -"to play videos, audio files and to handle your images or photos." -msgstr "" -"Mandrake Linux 9.2 vam omogućava da dovedete svoj multimedijalni računar do " -"krajnih granica! Koristeći najnoviji softver za slušanje muzičkih i audio " -"fajlova, editovanje i organizovanje vaših slika i fotografija, gledanje TV-a " -"i videa, i još mnogo toga" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Here is a list of all auto-detected printers. " -msgstr "Ovde se nalazi lista auto-detektovanih štampača. " - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Error installing aboot, \n" -"try to force installation even if that destroys the first partition?" -msgstr "" -"Greška pri instalaciji aboot-a, \n" -"Da li da probam da instaliram čak ako to vodi uništenju prve particije?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Restore Selected\n" -"Files" -msgstr "" -"Obnovi odabrane\n" -"fajlove" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"%s exists, delete?\n" -"\n" -"Warning: If you've already done this process you'll probably\n" -" need to purge the entry from authorized_keys on the server." -msgstr "" -"%s postoji, da ga obrišem?\n" -"\n" -"Upozorenje: Ukoliko ste već završili ovaj proces verovatno treba da\n" -"očistite unos sa authorized_keys na serveru." - -#: ../../network/tools.pm:1 -#, c-format -msgid "Please fill or check the field below" -msgstr "Molim VAS da popunite ili označite polja ispod" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Do you want to save /etc/fstab modifications" -msgstr "Da li hoćete da sačuvate izmene u /etc/fstab?" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Boot Protocol" -msgstr "Startni(Boot) protokol" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM-disks %s\n" -msgstr "LVM-diskovi %s\n" - -#: ../../services.pm:1 -#, c-format -msgid "On boot" -msgstr "Pri startanju" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The package %s is needed. Install it?" -msgstr "Paket %s je potreban. Da li želite da ga instalirate?" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus identification" -msgstr "Identifikacija busa" - -#: ../../lang.pm:1 -#, c-format -msgid "Vatican" -msgstr "Vatikan" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please make a backup of your data first" -msgstr "Molim vas, prvo napravite kopiju vaših podataka" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "ADSL adapters" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "You have more than one hard drive, which one do you install linux on?" -msgstr "" -"Imate više od jednog hard diska, na koji od njih želite da instalirate " -"Linux ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Eritrea" -msgstr "Eritreja" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot ISO" -msgstr "Boot ISO" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Firmware needed" -msgstr "ukoliko je potrebno" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove List" -msgstr "Ukloni Listu" - -#: ../advertising/05-desktop.pl:1 -#, c-format -msgid "A customizable environment" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Inuktitut" -msgstr "Inuktitut" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Some protocols, like rsync, may be configured at the server end. Rather " -"than using a directory path, you would use the 'module' name for the service " -"path." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Morocco" -msgstr "Maroko" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printer model do you have?" -msgstr "Koju model štampača imate?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add a new printer" -msgstr "Dodajte novi štampač" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " All of your selected data have been " -msgstr " Svi vaši odabrani podasi su " - -#: ../../lang.pm:1 -#, c-format -msgid "Nepal" -msgstr "Nepal" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Delete" -msgstr "<-- Obriši" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "cpu # " -msgstr "cpu # " - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "chunk size" -msgstr "chunk veličina" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" -"\n" -"If set to NONE, no issues are allowed.\n" -"\n" -"Else only /etc/issue is allowed." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Ako je \\fIarg\\fP = ALL allow /etc/issue i /etc/issue.net ne postoji. Ako " -"je \\fIarg\\fP = NONE nijedana radnja nije\n" -"dozvoljena ili je samo /etc/issue dozvoljen." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid " Enable/Disable sulogin(8) in single user level." -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Omogući/Onemogući sulogin(8) u single user nivou." - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "commands before booting, or 'c' for a command-line." -msgstr "komandi pri podizanju sistema,ili 'c' za komandnu liniju " - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "Problems installing package %s" -msgstr "Problemi pri instalaciji %s paketa" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "You will receive an alert if the load is higher than this value" -msgstr "Oglasiće se alarm ukoliko je učitano veće od ove vrednosti" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Add a scanner manually" -msgstr "Ručno instalacija skenera" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Refresh" -msgstr "Osveži" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Reload partition table" -msgstr "Ponovo učitaj tabelu particija" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yes, I want autologin with this (user, desktop)" -msgstr "Da, ja želim autologovanje sa ovim(korisnik,desktop)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore Selected" -msgstr "" -"Obnovi odabrane\n" -"fajlove" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search for fonts in installed list" -msgstr "Traži fontove u liti instaliranih" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The Local Network did not finish with `.0', bailing out." -msgstr "Lokalna Mreža nije završila sa`.0', bailing out." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Boot" -msgstr "Startanje" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " and the CD is in the drive" -msgstr "" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Tuner type:" -msgstr "Tip tjunera :" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Now, it's time to select a printing system for your computer. Other OSs may\n" -"offer you one, but Mandrake Linux offers two. Each of the printing system\n" -"is best suited to particular types of configuration.\n" -"\n" -" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" -"if you have a direct connection to your printer, you want to be able to\n" -"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" -"will handle only very simple network cases and is somewhat slow when used\n" -"with networks.) It's recommended that you use \"pdq\" if this is your first\n" -"experience with GNU/Linux.\n" -"\n" -" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" -"printing to your local printer or to one halfway around the planet. It is\n" -"simple to configure and can act as a server or a client for the ancient\n" -"\"lpd \" printing system, so it compatible with older operating systems\n" -"which may still need print services. While quite powerful, the basic setup\n" -"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" -"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" -"front-ends for printing or choosing printer options and for managing the\n" -"printer.\n" -"\n" -"If you make a choice now, and later find that you don't like your printing\n" -"system you may change it by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button." -msgstr "" -"Sada treba da izaberemo sistem za štampanje za vaš računar. Drugi OS-ovi " -"vam\n" -"nude jedan, ali vam Mandrake Linux nudi čak tri.\n" -"\n" -" * \"pdq\" što znači ``print, don't queue'', je izbor za one koji imaju\n" -"direktni konekciju sa svojim štampačem i želite da izbegnete\n" -"bilo kakve zastoje štampača, a pri tome nemate mrežne štampače. On može da " -"se koristi\n" -"samo na veoma jednostavnim mrežama i pomalo je i spor za mreže. Izaberite " -"\"pdq\"\n" -"ukoliko upoznajete GNU/Linux. Vaš izbor naravno možete promeniti\n" -"nakon isntalacije pokrećući PrinterDrake from iz Mandrake Kontrolnog\n" -"Centra i klikom na expert taster.\n" -"\n" -" * \"%s\"``Common Unix Printing System'', je izvrstan za štampanje na vašem\n" -"lokalonom štampaču kao i za štampanje po celoj zemaljskoj kugli. On je " -"jednostavan i može se ponašati\n" -"kao server ili kao klijent sa starog \"lpd\" sitema za štampanje. Takođe, " -"on\n" -"je kompatibilan sa sistemima koji su ranije postojali. On može mnogo toga, " -"ali\n" -"osnovno podešvanje je jednostavno kao i kod \"pdq\". Ukoliko treba da " -"emulirate\n" -"an \"lpd\" server, morate da pokrenete \"cups-lpd\" demon. On poseduje\n" -"grafički interfejs za štapanje i izbor opcija za štampanje.\n" -"\n" -"Ako to nij slučaj, CUPS je onda prava stvar jer je jednostavniji i bolji za " -"rad preko\n" -"mreža." - -#: ../../keyboard.pm:1 -#, c-format -msgid "\"Menu\" key" -msgstr "\"Meni\" taster" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Please check whether Printerdrake did the auto-detection of your printer " -"model correctly. Find the correct model in the list when a wrong model or " -"\"Raw printer\" is highlighted." -msgstr "" -"\n" -"\n" -"Proverite da li je Printerdrake auto-detektovao vaš štampač korektno. " -"Potražite pravi model na listi kada kursor stoji na pogrešno izabranom " -"modelu ili na \"Raw štampač\"." - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Administrator:" -msgstr "Administrator za sigurnost:" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the shell timeout. A value of zero means no timeout." -msgstr "" -"Argumenti: (val)\n" -"\n" -"Podesite shell pauzu. Vrednost zero - nula znači da nema pauze." - -#: ../../network/tools.pm:1 -#, c-format -msgid "Firmware copy succeeded" -msgstr "" - -#: ../../../move/tree/mdk_totem:1 -#, c-format -msgid "" -"You can't use another CDROM when the following programs are running: \n" -"%s" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check permissions of files in the users' home." -msgstr "" -"ukoliko je podešeno na da, proverite ovlašćenja za fajlove u korisničkom " -"home diretorijumu." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"You don't have an Internet connection.\n" -"Create one first by clicking on 'Configure'" -msgstr "" -"Vi nemate ni jednu podešenu Internet konekciju.\n" -"Kreirajte je klikom na 'Configure'" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Fonts copy" -msgstr "Kopija fonta" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automated" -msgstr "Automatski" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Do you want to test the configuration?" -msgstr "Da li hoćete da testirate konfiguraciju?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" -"GIMP." -msgstr "" -"Štampač \"%s\" je uspešno uklonjen iz Star Office/OpenOffice.org/GIMP-a" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save packages selection" -msgstr "Sačuvaj selekciju paketa" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Actions" -msgstr "/_Akcije" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Remove the last item" -msgstr "Ukloni zadnju vrednost" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "User list to restore (only the most recent date per user is important)" -msgstr "" -"Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su važni)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No net boot images created!" -msgstr "Nema kreiranih No net boot image!" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use pptp" -msgstr "koristi pptp" - -#: ../../services.pm:1 -#, c-format -msgid "Choose which services should be automatically started at boot time" -msgstr "Izaberite koje servisi treba automatski da se pokrenu pri startanju" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check files/directories writable by everybody" -msgstr "" -"ukoliko je podešeno na da, označite fajlove/diretorijume upisivim za sve " -"korisnike." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Learn how to use this printer" -msgstr "Naučite kako da koristite ovaj štampač" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configure the network now" -msgstr "Podesi mrežu sada" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose a mirror from which to get the packages" -msgstr "Izaberite mirror sa kog ćete skinuti pakete" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"The FAT resizer is unable to handle your partition, \n" -"the following error occured: %s" -msgstr "" -"Program za promenu veličine FAT paritcija ne može da upravlja vašom " -"particijom, \n" -"zbog sledeće greške: %s" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Size: " -msgstr "Veličina: %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which sector do you want to move it to?" -msgstr "Gde želite da instalirate starter?" - -#: ../../lang.pm:1 -#, c-format -msgid "Bahamas" -msgstr "Bahami" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Do you want to click on this button?" -msgstr "Da li želite da kliknete na ovaj taster? " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Manual configuration" -msgstr "Ručna konfiguracija" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "search" -msgstr "traži" - -#: ../../services.pm:1 -#, c-format -msgid "" -"This package loads the selected keyboard map as set in\n" -"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" -"You should leave this enabled for most machines." -msgstr "" -"Ovaj paket aktivira odabranu mapu tastature kako je podešeno \n" -"u /etc/sysconfig/keyboard.Ovo se podešava koristeći kbdconfig alatku.\n" -"Treba da bude uključen na većinu mašina." - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Xpmac (installation display driver)" -msgstr "Xpmac (Instalacija displej drajver)" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Zeroconf host name must not contain a ." -msgstr "Zeroconf ime domaćina (host name) ne sme da sadrži a." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid " Accept/Refuse icmp echo." -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Prihvati/Odbij icmp echo." - -#: ../../services.pm:1 -#, c-format -msgid "" -"Syslog is the facility by which many daemons use to log messages\n" -"to various system log files. It is a good idea to always run syslog." -msgstr "" -"Syslog je objekat pomoću kog mnogi demoni koriste za logovanje poruka\n" -"u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog." - -#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Unknown/Others" -msgstr "Nepoznati/Ostali" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "No TV Card detected!" -msgstr "TV kartica nije detektovana!" - -#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Options" -msgstr "Opcije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printer \"%s\" is set as the default printer now." -msgstr "Štampač \"%s\" je sada postavljen kao default štampač." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are configuring an OKI laser winprinter. These printers\n" -"use a very special communication protocol and therefore they work only when " -"connected to the first parallel port. When your printer is connected to " -"another port or to a print server box please connect the printer to the " -"first parallel port before you print a test page. Otherwise the printer will " -"not work. Your connection type setting will be ignored by the driver." -msgstr "" -"Treba da podesite OKI laserski win štampač. Ovi štampači\n" -"koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade " -"samo kada su povezani na prvi paralelni port. Kada je vaš štampač povezan na " -"drugi port ili na server povežite štampač na prvi paralelni port pre nego " -"ištampate test stranicu ili vaš štampač neće raditi. Postavke za vaš tip " -"konekcije će biti ignorisane od strane drajvera." - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" -msgstr "Generacija procesora (npr.: 8 za PentiumIII, ...)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detected" -msgstr "Auto-detekcija" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"You are about to configure your computer to install a PXE server as a DHCP " -"server\n" -"and a TFTP server to build an installation server.\n" -"With that feature, other computers on your local network will be installable " -"using this computer as source.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." -msgstr "" -"Vaš računar možete podesiti da instalira PXE server kao DHCP server.\n" -"kao i TFTP sever da bi kreirao instalacioni server.\n" -"Sa ovom opcijom, drugi kompjuteri na vašoj lokalnoj mreži će moći da koriste " -"instalaciju sa ovog računara.\n" -"\n" -"Proverite da li je podešena vaša Mrežni/Internet pristup preko drakconnect " -"pre nego što nastavimo.\n" -"\n" -"Napomena: potrebana vam je mrežna kartica da bi podesili lokalnu mrežu(LAN)." - -#: ../../harddrake/sound.pm:1 -#, fuzzy, c-format -msgid "" -"OSS (Open Sound System) was the first sound API. It's an OS independent " -"sound API (it's available on most UNIX(tm) systems) but it's a very basic " -"and limited API.\n" -"What's more, OSS drivers all reinvent the wheel.\n" -"\n" -"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " -"which\n" -"supports quite a large range of ISA, USB and PCI cards.\n" -"\n" -"It also provides a much higher API than OSS.\n" -"\n" -"To use alsa, one can either use:\n" -"- the old compatibility OSS api\n" -"- the new ALSA api that provides many enhanced features but requires using " -"the ALSA library.\n" -msgstr "" -"OSS (Otvoreni Sistem za Zvuk)je bio prvu zvučni API. On je nezavisan zvučni " -"API u odnosu na operativni sistem(dostupan je na većini unices sistema) ali " -"je prilično rudimenaran i ograničen API.\n" -"Čak šta više, većina drajvera kao da ponovo otkirva točak \n" -"\n" -"ALSA (Advanced Linux Sound Architecture) je modularne arhitekture koji\n" -"podržava veliki broj ISA, USB i PCI kartica.\n" -"\n" -"On takođe obezbeđuje mnogo veći API u odnosu na OSS.\n" -"\n" -"Da bi koristili alsa, možete koristi ili:\n" -"- stari kompatibilni OSS api\n" -"- novi ALSA api koji omogućava mnogo napredne mogućnosti ali zahteva " -"korišćenje ALSA biblioteke.\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"No free space for 1MB bootstrap! Install will continue, but to boot your " -"system, you'll need to create the bootstrap partition in DiskDrake" -msgstr "" -"Nema slobodnog prostora za 1MB bootstrap! Instalacija đe se nastaviti, ali " -"da bi podigli vašsistem, morađete da kreirate bootstrap particiju u " -"DiskDrake-u" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please choose the printer you want to set up or enter a device name/file " -"name in the input line" -msgstr "" -"Izaberite štampač koji želite da podesite unesite ime/ime fajla uređaja u " -"liniju za unos" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Refuse" -msgstr "Odbaci" - -#: ../../standalone/draksec:1 -#, c-format -msgid "LOCAL" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "HFS" -msgstr "HFS" - -#: ../../services.pm:1 -#, c-format -msgid "" -"HardDrake runs a hardware probe, and optionally configures\n" -"new/changed hardware." -msgstr "" -"HardDrake starta ispitivanje haredvera, i po potrebi đe podesiti \n" -"novi/izmenjeni hardver." - -#: ../../fs.pm:1 -#, c-format -msgid "Creating and formatting file %s" -msgstr "Kreiranje i formatiranje datoteke %s" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of sgid files." -msgstr "ukoliko je podešeno na da, označite dodavanje/uklanjanje sgid fajlova." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The HP LaserJet 1000 needs its firmware to be uploaded after being turned " -"on. Download the Windows driver package from the HP web site (the firmware " -"on the printer's CD does not work) and extract the firmware file from it by " -"uncompresing the self-extracting '.exe' file with the 'unzip' utility and " -"searching for the 'sihp1000.img' file. Copy this file into the '/etc/" -"printer' directory. There it will be found by the automatic uploader script " -"and uploaded whenever the printer is connected and turned on.\n" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing LVM to add to" -msgstr "Izaberi postojeći LVM za dodavanje" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "xfs restart" -msgstr "Restart xfs" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printer \"%s\" already exists,\n" -"do you really want to overwrite its configuration?" -msgstr "" -"Štampač \"%s\" već postoji,\n" -"da li stvarno želite da ponovo upišete njegove opcije?" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use the scanners on hosts: " -msgstr "Koristi skenere na hostovima: " - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselected All" -msgstr "Deselektuj Sve" - -#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "No partition available" -msgstr "nema dostupnih particija" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Printer Management \n" -msgstr "Upravljanje korisnicima \n" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Domain Name Resolver" -msgstr "Program za definisanje Imena domena" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Encryption key (again)" -msgstr "Ključ za enkripciju (ponovo)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Samba share name missing!" -msgstr "Nedostaje deljeno ime za Samba-u!" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type install done" -msgstr "Instalacija True Type fontova završena" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Detection in progress" -msgstr "Detekcija u toku" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Whole Kernel -->" -msgstr "Kompajliraj celi Kernel -->" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "modem" -msgstr "Modem" - -#: ../../lang.pm:1 -#, c-format -msgid "Welcome to %s" -msgstr "Dobrošli u %s" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" drakhelp 0.1\n" -"Copyright (C) 2003 MandrakeSoft.\n" -"This is free software and may be redistributed under the terms of the GNU " -"GPL.\n" -"\n" -"Usage: \n" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Update Modules floppy in drive %s" -msgstr "Ubacite Update Modules disketu u uređaj %s" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Bootsplash" -msgstr "Bootsplash" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"is directly connected to your system" -msgstr "" -"Sledeći štamač\n" -"\n" -"%s%s\n" -"je direktno povezan na vaš sistem" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer sharing on hosts/networks: " -msgstr "Zajedničko deljenje štampača na domaćinima(hosts)/mrežama: " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" command also allows to modify the option settings for a " -"particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\". " -msgstr "" -"\n" -"Komanda \"%s\" takođe dozvoljava izmenu opcija za konkretni posao štampanja. " -"Jednostavno dodajte željene ocije u komandnu liniju, e. g. \"%s <fajl>\". " - -#: ../../standalone/drakclock:1 -#, fuzzy, c-format -msgid "DrakClock" -msgstr "Drakbackup" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"In some cases, the %s driver needs to have extra information to work\n" -"properly, although it normally works fine without them. Would you like to " -"specify\n" -"extra options for it or allow the driver to probe your machine for the\n" -"information it needs? Occasionally, probing will hang a computer, but it " -"should\n" -"not cause any damage." -msgstr "" -"U nekim slučajevima, drajver %s zahteva dodatne informacije\n" -"za pravilan rad, mada može lepo da radi i bez njih. Da li hoćete\n" -"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n" -"Moguće je da će proba zaglaviti vaš računar, ali neće naneti nikakvu štetu." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not the correct CD label. Disk is labelled %s." -msgstr "NIje ipstavna oznaka CDa. Disk je označen sa %s." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"\n" -"- Daemon, %s via:\n" -msgstr "" -"\n" -"- Demonn (%s) uključuje :\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Cuba" -msgstr "Kuba" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "October" -msgstr "Oktobar" - -#: ../../lang.pm:1 -#, c-format -msgid "Belize" -msgstr "Belize" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Searching for new printers..." -msgstr "Tražim nove štampače..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " (multi-session)" -msgstr " (multi-sesija)" - -#: ../../any.pm:1 -#, c-format -msgid "Kernel Boot Timeout" -msgstr "Pauza pri startanju kernela" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s.\n" -"Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid " Activate/Disable daily security check." -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Aktiviraj/Deaktiviraj dnevne sigurnosne provere." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-CD-R.\n" -msgstr "\t-CD-R.\n" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Enable libsafe if libsafe is found on the system" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući libsafe ako je libsafe pronađen na sistemu." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "The DrakX Partitioning wizard found the following solutions:" -msgstr "DrakX čarobnjak za particioniranje je pronašao sledeća rešenja:" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Hungarian" -msgstr "Mađarski" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"Select your provider.\n" -"If it isn't listed, choose Unlisted." -msgstr "" -"Izaberite svog provajdera.\n" -" Ukoliko nije na listi, izaberite Unlisted" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automatic time synchronization (using NTP)" -msgstr "Automatska sinhronizacija vremena (preko NTP-a)" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Use my Windows partition" -msgstr "Proračunavam granice Windows fajl-sistema" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "8 MB" -msgstr "8 MB" - -#: ../../any.pm:1 -#, c-format -msgid "LDAP Server" -msgstr "LDAP Server" - -#: ../../services.pm:1 -#, c-format -msgid "" -"PCMCIA support is usually to support things like ethernet and\n" -"modems in laptops. It won't get started unless configured so it is safe to " -"have\n" -"it installed on machines that don't need it." -msgstr "" -"PCMCIA podrška se obično koristi za eternet i modeme u laptopovima.\n" -"Neće se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n" -"na sistemu kom nije potreban." - -#: ../../network/tools.pm:1 -#, c-format -msgid "Choose your country" -msgstr "Izaberi svoju zemlju" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- System Files:\n" -msgstr "" -"\n" -"- Sistemski fajlovi:\n" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Standalone Tools" -msgstr "Samostalni Alati" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Where" -msgstr "Gde" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "but not matching" -msgstr "ali ne poklapa se" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"Here you can select an alternative driver (either OSS or ALSA) for your " -"sound card (%s)." -msgstr "" -"Ovde možete izabrati alternativni drajver (ili OSS ili ALSA) za svoju zvučnu " -"karticu (%s)." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Configuring PCMCIA cards..." -msgstr "Konfigurišem PCMCIA kartice..." - -#: ../../common.pm:1 -#, c-format -msgid "kdesu missing" -msgstr "nedostaje kdesu" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "%s: %s requires a username...\n" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Encryption key" -msgstr "Ključ za enkripciju" - -#: ../../mouse.pm:1 -#, c-format -msgid "Microsoft IntelliMouse" -msgstr "Microsoft IntelliMouse" - -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"This setting will be activated after the installation.\n" -"During installation, you will need to use the Right Control\n" -"key to switch between the different keyboard layouts." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Christmas Island" -msgstr "Uskršnja ostrava" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Automatic" -msgstr "Automatski IP" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installation of bootloader failed. The following error occured:" -msgstr "Instalacija startera neuspela. Greška je:" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "EIDE/SCSI channel" -msgstr "EIDE/SCSI kanal" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Set this printer as the default" -msgstr "Podesi ovaj štampač kao default" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Verify that %s is the correct path" -msgstr "Da li je ovo ispravno podešeno?" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "partition %s" -msgstr "particija %s " - -#: ../../security/level.pm:1 -#, c-format -msgid "Paranoid" -msgstr "Paranoidna" - -#: ../../any.pm:1 -#, c-format -msgid "NIS" -msgstr "NIS" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Del User" -msgstr "<-- Obriši Korisnika" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Location on the bus" -msgstr "Lokacija na busu" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No printer found!" -msgstr "Nije pronađen štampač!" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the vendor name of the device" -msgstr "Ime prizovđača uređaja" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Erase entire disk" -msgstr "Izbriši celi disk" - -#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Default)" -msgstr " (Podrazumevano)" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Automatic reconfiguration" -msgstr "Automatska rekonfiguracija" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Receiving Speed:" -msgstr "Brzina pri pprijemu:" - -#: ../../lang.pm:1 -#, c-format -msgid "Turks and Caicos Islands" -msgstr "Turks and Caicos Islands" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "No Ip" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "<- Previous" -msgstr "<- Prethodni" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Transfer Now" -msgstr "" -" Prebaci \n" -"Sada" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Set root password and network authentication methods" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Koristi lozinku za autentifikaciju korisnika." - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Toggle between flat and group sorted" -msgstr "Birajte: ravno ili grupno sortirano" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Themes" -msgstr "Teme" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Options: %s" -msgstr "Opcije: %s" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"You are currently using %s as your boot manager.\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"Trenutno koristite %s kao Boot menadžer \n" -"Kliknite na Podesi (Configure) da bi pokrenuli podešavavanje." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "OKI winprinter configuration" -msgstr "OKI win štampač konfiguracija" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Helena" -msgstr "Sveta Jelena" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Parallel port #%s" -msgstr " na parelelnom portu #%s" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Security Level" -msgstr "Nivo sigurnosti" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Some steps are not completed.\n" -"\n" -"Do you really want to quit now?" -msgstr "" -"Neki koraci nisu kompletirani.\n" -"\n" -"Da li stvarno želite da završite ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Sudan" -msgstr "Sudan" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwertz layout)" -msgstr "Poljski (qwertz raspored)" - -#: ../../lang.pm:1 -#, c-format -msgid "Syria" -msgstr "Sirija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " -"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " -"an HP PhotoSmart or an HP LaserJet 2200?" -msgstr "" -"Da li je vaš uređaj više-funkcionalni uređaj proidzvođača HP ili Sony " -"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 sa skenereom, DeskJet " -"450, Sony IJP-V100), HP PhotoSmart ili HP LaserJet 2200?" - -# NOTE: this message will be displayed at boot time; that is -# only the ascii charset will be available on most machines -# so use only 7bit for this message (and do transliteration or -# leave it in English, as it is the best for your language) -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#: ../../bootloader.pm:1 -#, c-format -msgid "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system from the list above or\n" -"wait %d seconds for default boot.\n" -"\n" -msgstr "" -"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n" -"\n" -"Izaberite operativni sistem, ili\n" -"sacekate %d sekundi za startanje pretpostavljenog OS.\n" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Portuguese" -msgstr "Portugalski" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: " -msgstr "Ime Loopback datoteke: " - -#: ../../network/network.pm:1 -#, c-format -msgid "DNS server address should be in format 1.2.3.4" -msgstr "DNS adresa treba da bude u formatu 1.2.3.4" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Control key" -msgstr "Udaljena kontrola" - -#: ../../lang.pm:1 -#, c-format -msgid "Serbia" -msgstr "Srbija" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Newzealand" -msgstr "Novi Zeland" - -#: ../../fsedit.pm:1 -#, c-format -msgid "This directory should remain within the root filesystem" -msgstr "Ovaj direktorijum treba da ostane u root-u datotečnog sistema" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Across Network" -msgstr "preko Mreže" - -#: ../../keyboard.pm:1 -#, c-format -msgid "CapsLock key" -msgstr "CapsLock taster" - -#: ../../steps.pm:1 -#, c-format -msgid "Install bootloader" -msgstr "Instaliraj starter" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Select the memory size of your graphics card" -msgstr "Količina memorije na grafičkoj kartici" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Enable/Disable crontab and at for users.\n" -"\n" -"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" -"and crontab(1))." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući crontab i at za korisnike. Postavite korisnike sa " -"dozvolama u /etc/cron.allow i /etc/at.allow\n" -"(pročitajte man at(1) i crontab(1))." - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTIONS]\n" -"Network & Internet connection and monitoring application\n" -"\n" -"--defaultintf interface : show this interface by default\n" -"--connect : connect to internet if not already connected\n" -"--disconnect : disconnect to internet if already connected\n" -"--force : used with (dis)connect : force (dis)connection.\n" -"--status : returns 1 if connected 0 otherwise, then exit.\n" -"--quiet : don't be interactive. To be used with (dis)connect." -msgstr "" -"[OPTIONS]\n" -"Mrežna i Internet konekcija i aplikacije za monitoring\n" -"\n" -"--defaultintf interfejs : prikazuje ovaj interfejst po osnovnoj postavci\n" -"--connect : povezuje se na Internet ukoliko već nije povezan\n" -"--disconnect : prekida vezu sa Internetom ukoliko je već povezan\n" -"--force : koristi se uz dve prethodne opcije : primorava na povezivanje ili " -"prekid.\n" -"--status : prikadzuje 1 ukoliko je povezan ili 0 ako nije, i zatim " -"završava.\n" -"--quiet : bez interaktivnosti. Treba da se koristi sa opcijama za " -"povezivanje i prekid." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Dynamic IP Address Pool:" -msgstr "Dinamička IP adresa Pool:" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM name?" -msgstr "LVM ime?" - -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Some devices in the \"%s\" hardware class were removed:\n" -msgstr "Neki uređaji u \"%s\" klasi hardvera su uklonjeni:\n" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Found %s %s interfaces" -msgstr "Pronađeno %s %s interfejsa" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Install" -msgstr "Post-instalacija" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The internal domain name" -msgstr "Interno ime domena" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IRQ" -msgstr "IRQ kartice" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "logdrake" -msgstr "logdrake" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"Font Importation and monitoring " -"application \n" -"--windows_import : import from all available windows partitions.\n" -"--xls_fonts : show all fonts that already exist from xls\n" -"--strong : strong verification of font.\n" -"--install : accept any font file and any directry.\n" -"--uninstall : uninstall any font or any directory of font.\n" -"--replace : replace all font if already exist\n" -"--application : 0 none application.\n" -" : 1 all application available supported.\n" -" : name_of_application like so for staroffice \n" -" : and gs for ghostscript for only this one." -msgstr "" -"Program za kontrolu i importovanje " -"fontova \n" -"--windows_import : importuje sa svih dostupnih windows particija.\n" -"--xls_fonts : prikazuje sve fontove koji su već prisutni preko xls\n" -"--strong : strga provera fonta.\n" -"--install : instalira bilo koji font i bilo koji direktorijum.\n" -"--uninstall : deinstalira bilo koji font ili bilo koji direktorijum sa " -"fontovima.\n" -"--replace : zamenjuje sve fontove koji već postoje\n" -"--application : 0 bez aplikacije.\n" -" : 1 sve dostupne aplikacije podržane.\n" -" : name_of_application kao za na primer staroffice \n" -" : i gs za ghostscript za samo ovu." - -#: ../../standalone.pm:1 -#, c-format -msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" -msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the floppy drive you want to use to make the bootdisk" -msgstr "" -"Izabrerite disketni uređaj koji ćete koristiti za kreiranje starne diskete" - -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with text menu" -msgstr "LILO sa tekstualnim menijem" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "instantaneous" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Everything (no firewall)" -msgstr "Sve (bez firewall-a)" - -#: ../../any.pm:1 -#, c-format -msgid "You must specify a kernel image" -msgstr "Morate specificirati kernelov image" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on USB" -msgstr ", multi-funkcionalni uređaj na USB" - -#: ../../interactive/newt.pm:1 -#, c-format -msgid "Do" -msgstr "Uradi" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Contacting the mirror to get the list of available packages..." -msgstr "Kantaktirajte mirror za listu mogućih paketa" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (old)" -msgstr "Litvanski AZERTY(stari)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Brazilian (ABNT-2)" -msgstr "Brazilski (ABNT-2)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address of host/network:" -msgstr "IP adresa hosta/mreže:" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"the progress bar y coordinate\n" -"of its upper left corner" -msgstr "" -"y koorinata trake sa prikazom napretka\n" -"od svog gorenjeg levog ugla" - -#: ../../install_gtk.pm:1 -#, c-format -msgid "System installation" -msgstr "Instalacija sistema" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Vincent and the Grenadines" -msgstr "Sveti Vinsent i Grenandini" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid reboot by the console user." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli restartovanje od strane konzlolnog korisnika." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Open" -msgstr "/Datoteka/_Otvori" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Location of auto_install.cfg file" -msgstr "Lokacija auto_install.cfg fajla" - -#: ../../any.pm:1 -#, c-format -msgid "Open Firmware Delay" -msgstr "Otpočni Firmware pauzu" - -#: ../../lang.pm:1 -#, c-format -msgid "Hungary" -msgstr "Mađarska" - -#: ../../lang.pm:1 -#, c-format -msgid "New Zealand" -msgstr "NOvi Zeland" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Color configuration" -msgstr "Podešavanje boje" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"There are already some restrictions, and more automatic checks are run every " -"night." -msgstr "" -"Već postoje neka ograničenja, a više automatskih provera se pokreće svake " -"noći." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "please choose the date to restore" -msgstr "izaberite datum za obnavljanje" - -#: ../../lang.pm:1 -#, c-format -msgid "Netherlands Antilles" -msgstr "Holandski Antili" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Switching from ext2 to ext3" -msgstr "Menjam ext2 na ext3" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPRng" -msgstr "LPRng" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Browse to new restore repository." -msgstr "Pretražite novi restore repository." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard allows you to install local or remote printers to be used from " -"this machine and also from other machines in the network.\n" -"\n" -"It asks you for all necessary information to set up the printer and gives " -"you access to all available printer drivers, driver options, and printer " -"connection types." -msgstr "" -"\n" -"Dobrodošli u Čarobnjak za konfigurisanje štampača\n" -"\n" -"Ovaj čarobnjak će vam omogućiti da instalirate lokalne ili udaljene štampače " -"sa ovemašine kao i drugih mašina na mreži.\n" -"\n" -"Od vas će biti tražene sve neophodne informacije za podešavanje štampača a " -"dobićete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima " -"konekcije štampača." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "and %d unknown printers" -msgstr "i %d nepoznati štampači" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Early Intel Pentium chips manufactured have a bug in their floating point " -"processor which did not achieve the required precision when performing a " -"Floating point DIVision (FDIV)" -msgstr "" -"Rani Intel Pentium čipovi su imali grešku u floating tački procesora koji " -"nije uspevao da postigne zahtevanu preciznost pri izvođenju Floating point " -"DIVision (FDIV)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Backup quota exceeded!\n" -"%d MB used vs %d MB allocated." -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "No ISDN PCI card found. Please select one on the next screen." -msgstr "Nije pronađena ISDN PCI kartica.Izaberite jednu na sledećem ekranu." - -#: ../../common.pm:1 -#, c-format -msgid "GB" -msgstr "GB" - -#: ../../any.pm:1 -#, c-format -msgid "Please give a user name" -msgstr "Odredite korisničko ime" - -#: ../../any.pm:1 -#, c-format -msgid "Enable CD Boot?" -msgstr "Omogući startanje sa CD-a?" - -#: ../../../move/move.pm:1 -#, c-format -msgid "Simply reboot" -msgstr "" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid " enter `void' for void entry" -msgstr " unesite `void' za void unos" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backups on unmountable media - Use Catalog to restore" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "January" -msgstr "Januar" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Password history length" -msgstr "Ova lozinka je previše prosta" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Winmodem connection" -msgstr "Winmodem konekcija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Congratulations, your printer is now installed and configured!\n" -"\n" -"You can print using the \"Print\" command of your application (usually in " -"the \"File\" menu).\n" -"\n" -"If you want to add, remove, or rename a printer, or if you want to change " -"the default option settings (paper input tray, printout quality, ...), " -"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " -"Center." -msgstr "" -"\n" -"Čestitamo, baš štampač je sada instaliran i podešen!\n" -"\n" -"Možete da štampate koristeći \"Štampaj\" komandu u vašoj aplikaciji (obično " -"u \"Fajl\" meniju).\n" -"\n" -"Ukoliko želite da dodate, uklonite ili promenite ime štampaču, ili želite da " -"promenite default opcije (papir, kvalitet štampanja, ...), izaberite " -"\"Štampač\" u \"Hardver\" sekciji Mandrake Kontrolnog Centra." - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Now, you can run xawtv (under X Window!) !\n" -msgstr "Sada možete pokrenuti xawtv (pod X Window okruženjem!) !\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Not enough swap space to fulfill installation, please add some" -msgstr "Nema dovoljno swap-a da završi instalaciju, dodajte još swap-a" - -#. -PO: example: lilo-graphic on /dev/hda1 -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "%s on %s" -msgstr "%s (Port %s)" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid remote root login." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli udaljeno root logovanje." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" -"local time according to the time zone you selected. If the clock on your\n" -"motherboard is set to local time, you may deactivate this by unselecting\n" -"\"%s\", which will let GNU/Linux know that the system clock and the\n" -"hardware clock are in the same timezone. This is useful when the machine\n" -"also hosts another operating system like Windows.\n" -"\n" -"The \"%s\" option will automatically regulate the clock by connecting to a\n" -"remote time server on the Internet. For this feature to work, you must have\n" -"a working Internet connection. It is best to choose a time server located\n" -"near you. This option actually installs a time server that can used by\n" -"other machines on your local network as well." -msgstr "" -"GNU/Linux upravlja sa vremenom u GMT (Greenwich Mean Time) i prevodi ga u\n" -"lokalno vreme u zavisnosti koju ste vremensku zonu izabrali. Međuti, moguće " -"je\n" -"ovo i deaktivirati deselektovanjem \"Podesi hardverski časovnik na GMT\" " -"tako da hardverski časovnik\n" -"haima isto vreme kao i sistemski časovnik. Ovo je korisno kada na mašini " -"imate\n" -"još jedan operativni sistem kao što je Windows.\n" -"\n" -"Opcija \"Automatska sihronizacija časovnika\" će automatski regulisati\n" -"časovnik konektovanjem na udaljeni vremenski server na Internetu. Na \n" -"listi koja je prikazana, izaberite server koji se nalazi blizu vas. " -"Naravno,\n" -"morate imati ispravno podešenu Internet konekciju da bi mogli da koristite " -"ovu opciju. Ona će\n" -"ustvari instalirati na vašu mašinu vremenski server koji se pomogućnosti " -"može koristiti i od\n" -"strane drugih mašina na vašoj lokalnoj mreži." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Can't create log file!" -msgstr "Ne mogu da kreiram katalog!" - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 -#, c-format -msgid "Which is your timezone?" -msgstr "Koja je vaša vremenska zona ?" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use .backupignore files" -msgstr "Koristi quota zar backup fajlove" - -#: ../../lang.pm:1 -#, c-format -msgid "Guinea" -msgstr "Gvineja" - -#: ../../network/tools.pm:1 -#, c-format -msgid "The system is now connected to the Internet." -msgstr "Sistem je trenutno konektovan na Internet." - -#: ../../lang.pm:1 -#, c-format -msgid "South Georgia and the South Sandwich Islands" -msgstr "Južna Džordžija i Južna Sendvička Ostrva" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (broadcast)" -msgstr "Japan (broadcast)" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Monitor\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer." -msgstr "" -"Monitor\n" -"\n" -" Program za instalaciju obično automatski detektuje i podešava\n" -"monitor povezan na vašu mašinu. Ukoliko se to nedesi, možete sami\n" -"sami da izaberete model monitora sa liste." - -#: ../../lang.pm:1 -#, c-format -msgid "Mozambique" -msgstr "Mozambik" - -#: ../../any.pm:1 -#, c-format -msgid "Icon" -msgstr "Ikona" - -#: ../../../move/tree/mdk_totem:1 -#, fuzzy, c-format -msgid "Kill those programs" -msgstr "pristup X programima" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose what you want to backup" -msgstr "Izaberite šta želite da backup-ujete" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "256 colors (8 bits)" -msgstr "256 boja (8-bitna paleta)" - -#: ../../any.pm:1 -#, c-format -msgid "Read-write" -msgstr "Čitanje-pisanje RW" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size: %s\n" -msgstr "Veličina: %s\n" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Hostname: " -msgstr "Ime hosta:" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Add a rule" -msgstr "Dodajte pravilo" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Chunk size %s\n" -msgstr "Chunk-uj %s\n" - -#: ../advertising/02-community.pl:1 -#, c-format -msgid "Build the future of Linux!" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printer" -msgstr "Lokalni štampač" - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "Floppy access error, unable to mount device %s" -msgstr "Gde biste da montirate %s uređaj ?" - -#: ../../standalone.pm:1 -#, c-format -msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" -msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ADSL connection" -msgstr "ADSL konekcija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No configuration, please click Wizard or Advanced.\n" -msgstr "Bez konfiguracije, kliknite na Čarobnjak ili Napredno\n" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Error!" -msgstr "Greška!" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "cable connection detected" -msgstr "Detektovana je kablovska konekcija " - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Permission denied transferring %s to %s" -msgstr "Odbijen pristup pri transferu %s na %s" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Report Bug" -msgstr "/_Prijavite Bag" - -#: ../../lang.pm:1 -#, c-format -msgid "Dominica" -msgstr "Dominikana" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Resize" -msgstr "Promeni veličinu" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Resolution: %s\n" -msgstr "Rezolucija: %s\n" - -#: ../../install2.pm:1 -#, c-format -msgid "" -"Can't access kernel modules corresponding to your kernel (file %s is " -"missing), this generally means your boot floppy in not in sync with the " -"Installation medium (please create a newer boot floppy)" -msgstr "" -"Ne mogu da pristupim kernel modulima koji odgovaraju vašem kernelu (fajl %s " -"nmedostaje), što generalno znači da vaš boot floppy nije sinhronizaovan sa " -"Instalacionim medijom (kreirajte noviji boot floppy)" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Please select the correct port. For example, the \"COM1\" port under\n" -"Windows is named \"ttyS0\" under GNU/Linux." -msgstr "" -"Molim, izaberite odgovarajući port. Na primer, COM1 port pod MS Windows-om\n" -" u Linux-u ima oznaku ttyS0." - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be removed" -msgstr "Sledeći paketi će biti izbrisani" - -#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 -#, c-format -msgid "Connect to the Internet" -msgstr "Konektuj na internet" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use existing partitions" -msgstr "Koristi postojeću particiju" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Canadian (Quebec)" -msgstr "Kanadski (Kvebek)" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Mouse device: %s\n" -msgstr "Miš je postavljen na uređaj: %s\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Reselect correct fonts" -msgstr "Ponovo selektuj ispravne fontove" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Options\n" -"\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" -"Na kraju, bićete upitani da li želite grafički interfejs\n" -"pri startanju sistema. Ovo pitanje će vam biti postavnjeno čak i ako niste " -"testirali\n" -"konfiguraciju. Naravno, odgovorićete \"Ne\" ukoliko vaša mašina predstalja\n" -"server, ili ukoliko niste uspešno podesili\n" -"displejed." - -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "MandrakeExpert Corporate" -msgstr "MandrakeExpert Corporate" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -" [everything]\n" -" XFdrake [--noauto] monitor\n" -" XFdrake resolution" -msgstr "" -" [everything]\n" -" XFdrake [--noauto] monitor\n" -" XFdrake resolution" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Write protection" -msgstr "Auto-detekcija štampača" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "You've not selected any font" -msgstr "ne mogu da pronađen nijedan font.\n" - -#: ../../steps.pm:1 -#, c-format -msgid "Language" -msgstr "Izaberite jezik" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer model selection" -msgstr "Selekcija modela štampača" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"After changing type of partition %s, all data on this partition will be lost" -msgstr "" -"Posle promene tipa particije %s, svi podaci na ovoj particiji će biti " -"izbrisani" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "ISDN adapters" -msgstr "Interna ISDN kartica" - -#: ../../common.pm:1 -#, c-format -msgid "%d seconds" -msgstr "%d sekundi" - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Insert a blank floppy in drive %s" -msgstr "Ubacite praznu disketu u uređaj %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "A valid URI must be entered!" -msgstr "Morate uneti validan URI!" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Found \"%s\" interface do you want to use it ?" -msgstr "Pronađen je \"%s\" interfejs, da li želi te da ga koristite ?" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Re-configure interface and DHCP server" -msgstr "Rekonfiguriši interfejs i DHCP server" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound configuration" -msgstr "Podešavanje zvuka" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo test page" -msgstr "Foto test stranica" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Custom disk partitioning" -msgstr "Custom disk particioniranje" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter Printer Name and Comments" -msgstr "Unesite ime Štampača i Komentare" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The following printers\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" -"Sledeći štamači\n" -"\n" -"%s%s\n" -"su direktno povezani na vaš sistem" - -#: ../../network/modem.pm:1 -#, c-format -msgid "You don't have any winmodem" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "type: %s" -msgstr "tip: %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTY)" -msgstr "Slovački (QWERTY)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"This should be a comma-separated list of local users or email addresses that " -"you want the backup results sent to. You will need a functioning mail " -"transfer agent setup on your system." -msgstr "" - -#: ../../standalone/draksound:1 -#, c-format -msgid "No Sound Card detected!" -msgstr "Zvučna kartica nije detektovana!" - -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Mouse Port" -msgstr "Port za miša" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check for unsecured accounts" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"Need to restart the Display Manager for full changes to take effect. \n" -"(service dm restart - at the console)" -msgstr "" -"Morate da restartujete Menadžera za Dispej da bi sve izmene bile vidljive. \n" -"(service dm restart - u kondzoli)" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Ftp Server" -msgstr "Ftp Server" - -#: ../../lang.pm:1 -#, c-format -msgid "Uganda" -msgstr "Uganda" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "%s fonts conversion" -msgstr "Konverzija pfm fontova" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the type of bus on which the mouse is connected" -msgstr "Tip busa na koji je vaš miš priključen." - -#: ../../help.pm:1 -#, c-format -msgid "" -"As a review, DrakX will present a summary of information it has about your\n" -"system. Depending on your installed hardware, you may have some or all of\n" -"the following entries. Each entry is made up of the configuration item to\n" -"be configured, followed by a quick summary of the current configuration.\n" -"Click on the corresponding \"%s\" button to change that.\n" -"\n" -" * \"%s\": check the current keyboard map configuration and change that if\n" -"necessary.\n" -"\n" -" * \"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list.\n" -"\n" -" * \"%s\": By default, DrakX deduces your time zone based on the country\n" -"you have chosen. You can click on the \"%s\" button here if this is not\n" -"correct.\n" -"\n" -" * \"%s\": check the current mouse configuration and click on the button to\n" -"change it if necessary.\n" -"\n" -" * \"%s\": clicking on the \"%s\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation.\n" -"\n" -" * \"%s\": if a sound card is detected on your system, it is displayed\n" -"here. If you notice the sound card displayed is not the one that is\n" -"actually present on your system, you can click on the button and choose\n" -"another driver.\n" -"\n" -" * \"%s\": by default, DrakX configures your graphical interface in\n" -"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" -"\"%s\" to reconfigure your graphical interface.\n" -"\n" -" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" -"If you have a TV card and it is not detected, click on \"%s\" to try to\n" -"configure it manually.\n" -"\n" -" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" -"here. You can click on \"%s\" to change the parameters associated with the\n" -"card.\n" -"\n" -" * \"%s\": If you want to configure your Internet or local network access\n" -"now.\n" -"\n" -" * \"%s\": this entry allows you to redefine the security level as set in a\n" -"previous step ().\n" -"\n" -" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" -"idea to protect yourself from intrusions by setting up a firewall. Consult\n" -"the corresponding section of the ``Starter Guide'' for details about\n" -"firewall settings.\n" -"\n" -" * \"%s\": if you wish to change your bootloader configuration, click that\n" -"button. This should be reserved to advanced users.\n" -"\n" -" * \"%s\": here you'll be able to fine control which services will be run\n" -"on your machine. If you plan to use this machine as a server it's a good\n" -"idea to review this setup." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Comoros" -msgstr "Komori" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "May" -msgstr "Maj" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yaboot mode" -msgstr "Yaboot mod" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse" -msgstr "Generički 3 tastera miš" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable)" -msgstr "SAD (kabl)" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Can't relaunch LiLo!\n" -"Launch \"lilo\" as root in command line to complete LiLo theme installation." -msgstr "" -"Ne mogu da restartujem LiLo!\n" -"Pokrenite \"lilo\" kao root iz komandne linije da bi završili instalciju " -"teme za LiLo starter." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select another media to restore from" -msgstr "Izaberitedrugi medij za obnavljanje sa" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Software Manager" -msgstr "Menadžer Softvera" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Re-submit" -msgstr "Re-submit" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CD in place - continue." -msgstr "CD na mestu - nastavi." - -#: ../../common.pm:1 -#, c-format -msgid "KB" -msgstr "KB" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Network & Internet" -msgstr "Mreža i Internet" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"phonetic\" QWERTY" -msgstr "Litvanski \"fonetski\" QWERTY" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Net Boot Images" -msgstr "Net Boot Images" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Sharing of local scanners" -msgstr "Zajedničko deljenje lokalnih skenera" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play probing failed. Please select the correct monitor" -msgstr "Plug'n Play testiranje nije uspelo. Izaberite tačan model monitora" - -#: ../../../move/move.pm:1 -#, c-format -msgid "Detect again USB key" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Services and deamons" -msgstr "Servisi i demoni" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name missing!" -msgstr "Nedostaje ime udaljenog host-a!" - -#: ../../fsedit.pm:1 -#, c-format -msgid "with /usr" -msgstr "sa /usr" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Network" -msgstr "Mreža" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected to machines running Microsoft Windows" -msgstr "" -"Auto-detekcija štampača konektovanih na mašine na kojima je instaliran " -"Microsoft Windows" - -#: ../../any.pm:1 -#, c-format -msgid "This password is too simple" -msgstr "Ova lozinka je previše prosta" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Chkconfig obey msec rules" -msgstr "Podesi servise" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTZ)" -msgstr "Slovački (QWERTZ)" - -#: ../advertising/06-development.pl:1 -#, c-format -msgid "" -"To modify and to create in different languages such as Perl, Python, C and C+" -"+ has never been so easy thanks to GNU gcc 3 and the best Open Source " -"development environments." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "No devices found" -msgstr "NIje pronađen image" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Truly minimal install (especially no urpmi)" -msgstr "Stvarno minimalna instalacija (posebno bez urpmi)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use daemon" -msgstr "Koristi demon" - -#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 -#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 -#: ../../standalone/logdrake:1 -#, c-format -msgid "Authentication" -msgstr "Autentifikacija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add this printer to Star Office/OpenOffice.org/GIMP" -msgstr "Dodaj ovaj štampač u Star Office/OpenOffice.org/GIMP" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Additional CUPS servers: " -msgstr "Dodatni CUPS serveri: " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Choose one of the auto-detected printers from the list or enter the hostname " -"or IP and the optional port number (default is 9100) in the input fields." -msgstr "" -"Izaberite jedan od auto-detektovanih štampača sa liste i unesite ime hosta " -"ili IP i opcionalni broj porta (default je 9100) u polje za unos." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount %s?" -msgstr "Gde biste da montirate %s uređaj ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Algeria" -msgstr "Alžir" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Via Network" -msgstr "Obnovi preko Mreže" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use tar and bzip2 (rather than tar and gzip)" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Initrd-size" -msgstr "Initrd-veličina" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." -msgstr "" -"U slučaju da su dostupni različiti serveri za vašu karticu, sa ili\n" -"bez 3D akceleracije, najbolje je da izaberete server koji\n" -"najviše odgovara vašim potrebama." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tBackups use tar and gzip\n" -msgstr "\tBackus koristi tar i gzip\n" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Set as default" -msgstr "default" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "2 MB" -msgstr "2 MB" - -#: ../../printer/main.pm:1 ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configured on this machine" -msgstr "(na ovoj mašini)" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Both Control keys simultaneously" -msgstr "Oba Shift tastera istovremeno" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid " --help - display this help \n" -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTION]...\n" -" --no-confirmation don't ask first confirmation question in " -"MandrakeUpdate mode\n" -" --no-verify-rpm don't verify packages signatures\n" -" --changelog-first display changelog before filelist in the " -"description window\n" -" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" -msgstr "" -"[OPTION]...\n" -" --no-confirmation ne postavlja pitanje o potvrdi u MandrakeUpdate " -"modu\n" -" --no-verify-rpm ne proverava signature paketa\n" -" --changelog-first prikadzuje zapis o izmenama pre liste fajlova u " -"prozoru dza opis\n" -" --merge-all-rpmnew predlaže spajanje svih pronađenih .rpmnew/.rpmsave " -"fajlova" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Setting Default Printer..." -msgstr "Podešavanje Default štampača..." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s (using module %s)" -msgstr "Interfejs %s (koristeći modul %s)" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Generating preview ..." -msgstr "Generišem pregled..." - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " -"frequency), or add enough '0' (zeroes)." -msgstr "" -"Frekvencija treba da ima predznak k, M ili G (na primer, \"2.46G\" za 2.46 " -"GHz frekvenciju), ili dodajte dovoljno '0'(nula)." - -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "ignore" -msgstr "Singapur" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Allow/Forbid X connections:\n" -"\n" -"- ALL (all connections are allowed),\n" -"\n" -"- LOCAL (only connection from local machine),\n" -"\n" -"- NONE (no connection)." -msgstr "" -"Argumenti: (arg, listen_tcp=None)\n" -"\n" -"Dozvoljava/Nedozvoljava X konekciju. Prvi argument određije šta je urađeno\n" -"sa strane klijenta: ALL (sve konekcije su dozvoljene), LOCAL (samo\n" -"lpkalne konekcije) i NONE (bez konekcije)." - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on parallel port #%s" -msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s" - -#: ../../mouse.pm:1 -#, c-format -msgid "serial" -msgstr "serijski" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "DVD-ROM" -msgstr "DVD-ROM" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Latin\" layout)" -msgstr "Gruzijski (\"Latinični\" rapored)" - -#: ../advertising/09-mdksecure.pl:1 -#, c-format -msgid "Get the best items with Mandrake Linux Strategic partners" -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"You may now provide options to module %s.\n" -"Note that any address should be entered with the prefix 0x like '0x123'" -msgstr "" -"Sada možete da ubacite njegove opcije u modul %s.\n" -"Zapamtite da svaka adresa treba da se unosi sa prefiksom 0x kao npr. '0x123'" - -#: ../../lang.pm:1 -#, c-format -msgid "Kenya" -msgstr "Kenija" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``Unmount'' first" -msgstr "Prvo uradite ``Demontiraj''" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing mtools packages..." -msgstr "Instaliram mtools pakete..." - -#: ../../any.pm:1 -#, c-format -msgid "You must specify a root partition" -msgstr "Morate odrediti root particiju" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "first step creation" -msgstr "kreiranje prvog koraka" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Both Shift keys simultaneously" -msgstr "Oba Shift tastera istovremeno" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" --id <id_label> - load the html help page which refers to id_label\n" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Select a scanner model" -msgstr "Izaberite model skenera" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Accept/Refuse bogus IPv4 error messages." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Prihvati/Odbij IPv4 poruke o greškama." - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPRng - LPR New Generation" -msgstr "LPRng - LPR Nove Generacije" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup Configuration" -msgstr "Drakbackup Konfiguracija" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Save as.." -msgstr "Snimi Kao..." - -#: ../../lang.pm:1 -#, c-format -msgid "Korea (North)" -msgstr "Koreja (Severna)" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"This interface has not been configured yet.\n" -"Launch the configuration wizard in the main window" -msgstr "" -"Ovaj interfejs još uvek nije podešen.\n" -"Pokrenite konfiguracionog čarobnjaka u glavnom prozoru" - -#: ../../install_gtk.pm:1 -#, c-format -msgid "System configuration" -msgstr "Konfiguracija sistema" - -#: ../../any.pm:1 ../../security/l10n.pm:1 -#, c-format -msgid "Autologin" -msgstr "Auto logovanje" - -#: ../../any.pm:1 -#, c-format -msgid "Domain Admin Password" -msgstr "Admin Lozinka domena" - -#: ../advertising/05-desktop.pl:1 -#, fuzzy, c-format -msgid "" -"Perfectly adapt your computer to your needs thanks to the 11 available " -"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " -"2.2, Window Maker, ..." -msgstr "" -"Mandrake Linux 9.2 vam donosi 11 različitih grfičkih desktop okruženja i " -"window menadžera pa tako možete izabrati između GNOME 2, KDE 3, Window " -"Maker..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring printer ..." -msgstr "Podešavanje štampača ..." - -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To ensure data integrity after resizing the partition(s), \n" -"filesystem checks will be run on your next boot into Windows(TM)" -msgstr "" -"Da bi osigurali integritet nakon promene veličine particije(a), \n" -"provera fajl sistema će biti pokrenuta kada se sledeći put ulogujete u " -"Windows(TM)" - -#: ../../common.pm:1 -#, c-format -msgid "MB" -msgstr "MB" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run some checks against the rpm database." -msgstr "ukoliko je podešeno na da, pokrenite proveru rpm baze podataka." - -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (British)" -msgstr "Devičanska Ostrva(V.Britanija)" - -#: ../../lang.pm:1 -#, c-format -msgid "Bermuda" -msgstr "Bermuda" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "click here if you are sure." -msgstr "kliknite ovde ukoliko ste sigurni." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"No configuration file found \n" -"please click Wizard or Advanced." -msgstr "" -"Nije pronađen kofiguracioni fajl \n" -"Kliknite na Čarobnjak ili Napredno." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Listed here are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, since they are good for most\n" -"common installations. If you make any changes, you must at least define a\n" -"root partition (\"/\"). Do not choose too small a partition or you will not\n" -"be able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a \"/home\" partition\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" -"Iznad se nalazi lista postojećih Linux particija koje su detektovane\n" -"na hard disku. Možete zadržati izbor koji je napravio čarobnjak, jer je " -"dobar za a\n" -"opštu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n" -"particiju (\"/\"). Nemojte da birate suviše malu particiju jer nećete moći " -"da\n" -"instalirate ovoljno softvera. Ukoliko želite da podatke staviljate na " -"posebnu particiju ,\n" -"morate da izaberete i \"/home\" (moguće je ukoliko imate više od jedne\n" -"Linux particije).\n" -"\n" -"\n" -"Informacija: svaka particija je prikazana na sledeći način: \"Ime\", " -"\"Kapacitet\".\n" -"\n" -"\"Ime\" je kodirano na sledeći način: \"tip hard diska\", \"broj hard diska" -"\",\n" -"\"proj particije\" (na primer, \"hda1\").\n" -"\n" -"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE uređaj i \"sd\"\n" -"ukoliko je SCSI hard disk.\n" -"\n" -"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Za IDE hard " -"diskove:\n" -"\n" -" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n" -"\n" -" * \"b\" znači \"slave hard disk na primarnom IDE kontroloeru\",\n" -"\n" -" * \"c\" znači \"master hard disk na sekundranom IDE kontroloeru\",\n" -"\n" -" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n" -"\n" -"\n" -"Sa SCSI hard diskovima, a \"a\" znači \"primarni hard disk\", a \"b\" " -"znači \n" -"\"sekundarni hard disk \", itd..." - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, c-format -msgid "Remove" -msgstr "Ukloni" - -#: ../../lang.pm:1 -#, c-format -msgid "Lesotho" -msgstr "Lesoto" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "utopia 25" -msgstr "utopia 25" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Pipe job into a command" -msgstr "Ubaci naredbu u komandu" - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Remove system config files" -msgstr "Ukloni loopback fajl ?" - -#: ../../lang.pm:1 -#, c-format -msgid "Cote d'Ivoire" -msgstr "Obala slonovače" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "new dynamic device name generated by core kernel devfs" -msgstr "novo dinamičko ime uređaja generisano od strane core kernel devfs" - -#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 -#: ../../standalone/drakclock:1 ../../standalone/drakgw:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Yes" -msgstr "Da" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Which protocol do you want to use?" -msgstr "Koji protokol želite da koristite ?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Progress" -msgstr "Obnovi stanje napredovanja" - -#: ../../lang.pm:1 -#, c-format -msgid "Estonia" -msgstr "Estonija" - -#: ../../partition_table.pm:1 -#, c-format -msgid "" -"You have a hole in your partition table but I can't use it.\n" -"The only solution is to move your primary partitions to have the hole next " -"to the extended partitions." -msgstr "" -"Imate prazninu u vašoj tabeli particija ali je ne mogu korisiti.\n" -"Jedino rešenje je da pomerite primarnu particiju tako da praznina bude\n" -"do extended particija" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Choose the host on which the local scanners should be made available:" -msgstr "Izaberite hosta na kojem bi lokalni štampači trebali biti dostupni:" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Channel" -msgstr "Kanal" - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Add" -msgstr "Dodaj" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Error while sending mail. \n" -msgstr " Greška tokom slanja mail-a. \n" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Keyboard" -msgstr "Tastatura" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Insert the CD with volume label %s\n" -" in the CD drive under mount point /mnt/cdrom" -msgstr "" -"Ubacite CD sa oznakom %s\n" -" u CD uređaj sa tačkom montiranja /mnt/cdrom" - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " -"enough '0' (zeroes)." -msgstr "" -"Raspon treba da ima predznak k, M ili G (na primer, \"11M\" za 11M), ili " -"dodajte dovoljno '0' (nula)." - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the connection you want to configure" -msgstr "Izaberite tip konekcije koji želite da koristite" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Please wait, setting security level..." -msgstr "Samo momenat, podešavam nivo sigurnosti..." - -#: ../../network/network.pm:1 -#, c-format -msgid "Configuring network device %s" -msgstr "Podešavanje mrežnog uređaja %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "activated" -msgstr "Aktivirano" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Please choose which network interface will be used for the dhcp server." -msgstr "Izaberite mrežni interfejs koji želite da koristite za dhcp server." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Finding packages to upgrade..." -msgstr "Tražim pakete za ažuriranje..." - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mount point: " -msgstr "Tačka montiranja: " - -#: ../../standalone/drakfont:1 -#, c-format -msgid "parse all fonts" -msgstr "parsiraj sve fontove" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Allow/Forbid direct root login." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli diektno root logovanje." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid " Accept/Refuse broadcasted icmp echo." -msgstr "" -"Argumenti: (arg)\n" -"\n" -" Prihvati/Odbij prenosivi icmp echo." - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "With X" -msgstr "Sa X-ovima" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Multi-head configuration" -msgstr "Multi-head konfiguracija" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "No browser available! Please install one" -msgstr "Nema dostupnog pretraživača! Molim Vas da instalirate barem jednog" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "" -"Keep the changes?\n" -"The current configuration is:\n" -"\n" -"%s" -msgstr "" -"Sačuvaj promene?\n" -"Trenutna konfiguracija je:\n" -"\n" -"%s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use ReiserFS for partitions smaller than 32MB" -msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB" - -#: ../../services.pm:1 -#, c-format -msgid "" -"The rwho protocol lets remote users get a list of all of the users\n" -"logged into a machine running the rwho daemon (similiar to finger)." -msgstr "" -"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n" -"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (slično finger-u)." - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Domain name" -msgstr "Ime domena" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Sharing of local printers" -msgstr "Deljenje lokalnih štampača" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Enable/Disable libsafe if libsafe is found on the system." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Omogući/Onemogući libsafe ako je libsafe pronađen na sistemu." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Available printers" -msgstr "Dostupni štampači" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "NO" -msgstr "INFO" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Empty" -msgstr "Prazno" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "text width" -msgstr "širina teksta" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount device %s?" -msgstr "Gde biste da montirate %s uređaj ?" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The default lease (in seconds)" -msgstr "default puštanje (u sekundama)" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "" -"We are now going to configure the %s connection.\n" -"\n" -"\n" -"Press \"%s\" to continue." -msgstr "" -"\n" -"\n" -"\n" -"Sada treba da podesimo %s konekciju.\n" -"\n" -"\n" -"Pritisnite \"U redu\" za nastavak." - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Interface \"%s\"" -msgstr "Interfejs \"%s\"" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "With basic documentation (recommended!)" -msgstr "Sa osnovnom dokumentacijom (preporuka!)" - -#: ../../mouse.pm:1 -#, c-format -msgid "1 button" -msgstr "1 taster" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"There are %d unknown printers directly connected to your system" -msgstr "" -"\n" -"Prisutno je %d nepoznatih štampača povezanih na vaš sistem" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Test" -msgstr "Test" - -#: ../../lang.pm:1 -#, c-format -msgid "Korea" -msgstr "Koreja" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (default `%s'%s) " -msgstr "Vaš izbor? (default `%s'%s) " - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer" -msgstr "Raw štampač" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "official vendor name of the cpu" -msgstr "Zvanično ime proizvođača za procesor" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Useless without Terminal Server" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Vendor" -msgstr "Proizvođač" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s" -msgstr "Interfejs %s" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure mouse" -msgstr "Podešavanje miša" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the mount points" -msgstr "Izaberite tačke montiranja" - -#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 -#, c-format -msgid "OK" -msgstr "OK" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Yugoslavian (latin)" -msgstr "Srpski (latinica)" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing" -msgstr "Instaliram" - -#: ../../mouse.pm:1 -#, fuzzy, c-format -msgid "Logitech MouseMan with Wheel emulation" -msgstr "Logitech MouseMan" - -#: ../../any.pm:1 -#, c-format -msgid "Launch userdrake" -msgstr "Pokreni userdrake" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Is this an install or an upgrade?" -msgstr "Da li je ovo instalacija ili ažuriranje?" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "ISDN card" -msgstr "Interna ISDN kartica" - -#: ../advertising/02-community.pl:1 -#, c-format -msgid "" -"To share your own knowledge and help build Linux software, join our " -"discussion forums on our \"Community\" webpages." -msgstr "" -"Da bi podelili vaše znanje i pomogli u razvoju Linux alata, pridružite se " -"diskusionim forumima koje možete pronaći na našim \"Community\" veb " -"stranicama" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Hard drive.\n" -msgstr "\t-Hard disk.\n" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This step is activated only if an old GNU/Linux partition has been found on\n" -"your machine.\n" -"\n" -"DrakX now needs to know if you want to perform a new install or an upgrade\n" -"of an existing Mandrake Linux system:\n" -"\n" -" * \"%s\": For the most part, this completely wipes out the old system. If\n" -"you wish to change how your hard drives are partitioned, or change the file\n" -"system, you should use this option. However, depending on your partitioning\n" -"scheme, you can prevent some of your existing data from being over-written.\n" -"\n" -" * \"%s\": this installation class allows you to update the packages\n" -"currently installed on your Mandrake Linux system. Your current\n" -"partitioning scheme and user data is not altered. Most of other\n" -"configuration steps remain available, similar to a standard installation.\n" -"\n" -"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" -"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" -"to Mandrake Linux version \"8.1\" is not recommended." -msgstr "" -"Ovaj korak se aktivira samo u slučaju da postoji stara GNU/Linux particija " -"na\n" -"vašioj mošini.\n" -"\n" -"DrakX sada treba da zna da li želite da izvedete čistu instalaciju ili " -"ažuriranje\n" -"postojećeg Mandrake Linux sistema:\n" -"\n" -" * \"Instalacija\": U većini slučajeva, ova opcija kompletno briše stari\n" -"sistem. Ukoliko želite da izmenite broj particija, ili\n" -"promenite fajl sistem, trebali bi da koristite ovu opciju. Ipak, u " -"zavisnosti od\n" -"šeme particija, možete zaštititi neke postojeće podatke\n" -"od formatiranja.\n" -"\n" -" * \"Ažuriranje\": ova instalaciona klasa vam dozvoljava da uradite " -"ažuriranje paketa\n" -"na trenutno instaliranom Mandrake Linux sistemu. Vaša trenutna\n" -"šema particija i korisnički podaci se ne menjaju. Većina drugih\n" -"konfiguracionih koraka i dalje ostaje dostupna, slično standardnoj " -"instalaciji.\n" -"\n" -"Upotreba opcije ``Ažuriranje'' bi trebalo da bude bez problema na Mandrake " -"Linux sistemima\n" -"od verzije \"8.1\" ili novije. Izvođenje ažuriranja na verzijama \n" -"Mandrake Linux pre \"8.1\" nije preporučljivo." - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "" -"\n" -" Copyright (C) 2001-2002 by MandrakeSoft \n" -" DUPONT Sebastien (original version)\n" -" CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n" -"\n" -" This program is free software; you can redistribute it and/or modify\n" -" it under the terms of the GNU General Public License as published by\n" -" the Free Software Foundation; either version 2, or (at your option)\n" -" any later version.\n" -"\n" -" This program is distributed in the hope that it will be useful,\n" -" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -" GNU General Public License for more details.\n" -"\n" -" You should have received a copy of the GNU General Public License\n" -" along with this program; if not, write to the Free Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"\n" -" Thanks:\n" -" - pfm2afm: \n" -"\t by Ken Borgendale:\n" -"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" -" - type1inst:\n" -"\t by James Macnicol: \n" -"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" -" - ttf2pt1: \n" -"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" -" Convert ttf font files to afm and pfb fonts\n" -msgstr "" -"\n" -" Copyright (C) 2001-2002 by MandrakeSoft \n" -"\tDUPONT Sebastien sdupont@mandrakesoft.com\n" -" CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n" -"\n" -" Ovaj program je bespaltan; možete ga redistribuirati i/ili menjati\n" -" pod uslovima GNU General Public License kako je objavljeno\n" -" u Free Software Fondaciji; ili verziji 2, ili (u vašem slučaju)\n" -" bilo kojoj novijoj verziji.\n" -"\n" -" Ovaj program je distribuiran u nadi da će biti od koristi,\n" -" sli BEZ IKAKVIH GARANCIJA; čak i bez garancije za\n" -" KORISNOST i PRAKTIČNU UPOTREBU. Pogledajte\n" -" GNU General Public Licencu za više detalja.\n" -"\n" -" Trebali bi da mate kopiju GNU General Public Licence\n" -" zajedno sa ovim programom; ukoliko je nemate, pišite nam na adresu Free " -"Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"\n" -" Zahvaljujemo se:\n" -" - pfm2afm: \n" -"\t by Ken Borgendale:\n" -"\t Konverzija Windows .pfm fajla u .afm (Adobe Font Metrics)\n" -" - type1inst:\n" -"\t by James Macnicol: \n" -"\t type1inst generiše fajlove fonts.dir fonts.scale & Fontmap.\n" -" - ttf2pt1: \n" -"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" -" Konvertuje ttf font fajlove u afm i pfb fontove\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on remote CUPS server" -msgstr "Štampač ili Udaljeni CUPS server" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." -msgstr "" -"Neospeo pokušaj uklanjanja štampača \"%s\" iz Star Office/OpenOffice.org/" -"GIMP-a" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "here if no." -msgstr "a ovde ukoliko niste." - -#: ../../network/network.pm:1 -#, c-format -msgid "DHCP host name" -msgstr "DHCP ime hosta" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The maximum lease (in seconds)" -msgstr "Maksimalno puštanje (u sekundama)" - -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose which serial port your mouse is connected to." -msgstr "Izaberite na koji serijski port je vaš miš priključen." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Did it work properly?" -msgstr "Da li radi ispravno?" - -#: ../../fs.pm:1 -#, c-format -msgid "Mount the file system read-only." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Poor" -msgstr "Bedna" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Report check result by mail" -msgstr "ukoliko kažete da, pošaljite rezultat provere mail-om." - -#: ../../lang.pm:1 -#, c-format -msgid "Grenada" -msgstr "Grenada" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP start range" -msgstr "DHCP početak raspona" - -#: ../../any.pm:1 -#, c-format -msgid "Unsafe" -msgstr "Nesigurno" - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "SSH server" -msgstr "SSH Server" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid ", %s sectors" -msgstr ", %s sektora" - -#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 -#: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 -#, c-format -msgid "No" -msgstr "Ne" - -#: ../../lang.pm:1 -#, c-format -msgid "Guadeloupe" -msgstr "Gvadalupe" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Kannada" -msgstr "Kanada" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "could not find any font.\n" -msgstr "ne mogu da pronađen nijedan font.\n" - -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Do you want the BackSpace to return Delete in console?" -msgstr "Da li želite da BackSpace da vrati Delete u konzolu?" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Vertical refresh rate" -msgstr "Vertikalna frekvencija" - -#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 -#, c-format -msgid "Entering step `%s'\n" -msgstr "Pokrećem korak `%s'\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Niger" -msgstr "Niger" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan" -msgstr "Logitech MouseMan" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing %s ..." -msgstr "Ukanjam %s ..." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No printer" -msgstr "Bez štampača" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "alert configuration" -msgstr "konfiguracija alarma" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NetWare Printer Options" -msgstr "NetWare opcije štampača" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "%s BootSplash (%s) preview" -msgstr "%s BootSplash (%s) pregled" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "February" -msgstr "Februar" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "General" -msgstr "Opšte" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "/etc/issue* exist" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Add a user" -msgstr "Dodaj korisnika" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Network configuration (%d adapters)" -msgstr "Podešavanje mreže (%d adaptera)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "April" -msgstr "April" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Deactivate now" -msgstr "deaktiviraj sad" - -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "Mandatory package %s is missing" -msgstr "Tekući paket %s nedostaje" - -#: ../../lang.pm:1 -#, c-format -msgid "Philippines" -msgstr "Filipini" - -#: ../../interactive.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 -#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 -#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 -#: ../../standalone/draksec:1 ../../standalone/mousedrake:1 -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Ok" -msgstr "U redu" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "drakTermServ Overview" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print Queue Name" -msgstr "Print Queue ime:" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you want to use aboot?" -msgstr "Da li želite da koristite aboot ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Belarusian" -msgstr "Beloruski" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"PDQ only supports local printers, remote LPD printers, and Socket/TCP " -"printers.\n" -msgstr "" -"PDQ podržava samo lokalne štampače, udaljene LPD štampače, i Socket/TCP " -"štampače.\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move files to the new partition" -msgstr "Premesti fajlove na novu particiju" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Add here the CUPS servers whose printers you want to use. You only need to " -"do this if the servers do not broadcast their printer information into the " -"local network." -msgstr "" -"Ovde možete dodati CUPS servere čije štampače želite da koristite. Ovo treba " -"da uradite samo ukoliko serveri ne šalju informacije o štampaču na lokalnu " -"mrežu." - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer.\n" -"\n" -"Please plug in and turn on all printers connected to this machine so that it/" -"they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"Dobrodošli u Čarobnjak za podešavanje štampača\n" -"\n" -"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na " -"ovaj računar, poezan direktno na mrežu.\n" -"\n" -"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar " -"kao i u električno napajanje da bi mogli biti auto-detektovani.\n" -"\n" -"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne želite da sada " -"podešavate vaš štampač(e)." - -#: ../../lang.pm:1 -#, c-format -msgid "Pitcairn" -msgstr "Pitcairn" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Catalog" -msgstr "Obnovi iz Kataloga" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "IDE" -msgstr "IDE" - -#: ../../fs.pm:1 -#, c-format -msgid "mounting partition %s in directory %s failed" -msgstr "montiranje particije %s u direktorijum %s nije uspelo" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo screen" -msgstr "Lilo ekran" - -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with graphical menu" -msgstr "LILO sa grafičkim menijem" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Estimating" -msgstr "Procenjujem" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It is already installed" -msgstr "Možete deselektovati ovaj paket jer je već instaliran" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on SMB/Windows server \"%s\"" -msgstr ", štampač \"%s\" na SMB/Windows serveru \"%s\"" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Go on anyway?" -msgstr "Svejedno nastaviti dalje ?" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages and rebuilding rpm database..." -msgstr "Tražim dustupne pakete za reizgradnju rpm baze podataka..." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"\n" -" DrakBackup Report \n" -msgstr "" -"\n" -" DrakBackup Izveštaj \n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Does not appear to be recordable media!" -msgstr "Ovo izgleda nije medij na koji može da se snima!" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Specify options" -msgstr "Navedite opcije" - -#: ../../lang.pm:1 -#, c-format -msgid "Vanuatu" -msgstr "Vanuatu" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "New user list:\n" -msgstr "" -"\n" -"- Korisnički fajlovi:\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Either the server name or the server's IP must be given!" -msgstr "Morate dati ili ime servera ili njegov IP!" - -#: ../../any.pm:1 -#, c-format -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"SILO on your system, or another operating system removes SILO, or SILO " -"doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures.\n" -"\n" -"If you want to create a bootdisk for your system, insert a floppy in the " -"first\n" -"drive and press \"Ok\"." -msgstr "" -"Startni disk obezbeđuje način podizanja vašeg Linux sistema bez zavisnosti\n" -"od normalnog startera. Ovo je korisno ako ne želite da instalirate\n" -"SILO(ili grub) na vaš sistem, ako drugi operativni sistem ukloni SILO, ili " -"SILO ne\n" -"radi sa vašim hardverom. Startni disk možete koristiti sa Mandrake Linux\n" -"'diskom za spasavanje', što olakšava oporavak u slučaju teže havarije.\n" -"Ukoliko želite da kreirate startnu disketu za vaš sistemubacite disketu u " -"pogon i pritisnite \"Da\"." - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use an encrypted file system for mount point %s" -msgstr "Ne možete koristiti enkriptovani fajl sistem za tačku montiranja %s" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set the password history length to prevent password reuse." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Podesite istoriju pamćenja lozinki da bi sprečili ponovnu upotrebu lozinke." - -#: ../../lang.pm:1 -#, c-format -msgid "Norfolk Island" -msgstr "Norfolk Ostrva" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Theme installation failed!" -msgstr "Instalacija teme nije uspela!" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Nothing to do" -msgstr "Nema šta da se uradi" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Use for loopback" -msgstr "Koristi za loopback" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Bug Report Tool" -msgstr "Mandrake Program za Prijavljivanje Grešaka" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Apply filter" -msgstr "Primeni filter" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use pppoe" -msgstr "koristi pppoe" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving files to the new partition" -msgstr "Premeštanje fajlova na novu particiju" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" -msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom" - -#: ../../help.pm:1 ../../interactive.pm:1 -#, c-format -msgid "Advanced" -msgstr "Napredno" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer" -msgstr "Prebaci" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (Swedish)" -msgstr "Dvorak (Švedski)" - -#: ../../lang.pm:1 -#, c-format -msgid "Afghanistan" -msgstr "Avganistan" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "More Options" -msgstr "Više Opcija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Delete Hard Drive tar files after backup to other media." -msgstr "Obrišite tar fajove na tvrdom disku nakon backup-a na drugi medij." - -#: ../../lang.pm:1 -#, c-format -msgid "Burundi" -msgstr "Burundi" - -#: ../../services.pm:1 -#, c-format -msgid "" -"cron is a standard UNIX program that runs user-specified programs\n" -"at periodic scheduled times. vixie cron adds a number of features to the " -"basic\n" -"UNIX cron, including better security and more powerful configuration options." -msgstr "" -"cron je standardni UNIX program koji pokreće korisničke programe\n" -"preriodično u zakazano vreme. vixie cron dodaje opcije prostom UNIX cron," -"uključujući bolju sigurnost i bolju podesivost." - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add Client -->" -msgstr "Dodaj Klijenta -->" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read carefully!" -msgstr "PAŽLJIVO PROČITAJ !" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "RW" -msgstr "RW" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"Please,\n" -"type in your tv norm and country" -msgstr "" -"Molim Vas da\n" -"ukucate vaš tv sistem i zemlju" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Port" -msgstr "Port" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "No (experts only)" -msgstr "Ne (samo eksperti)" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No kernel selected!" -msgstr "Nijedan kernel nije izabran!" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Press enter to boot the selected OS, 'e' to edit the" -msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu " - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Set-GID" -msgstr "Podesi-GID" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The encryption keys do not match" -msgstr "Nepodudarnost enkripcionih ključeva (lozinki)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"For a multisession CD, only the first session will erase the cdrw. Otherwise " -"the cdrw is erased before each backup." -msgstr "" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "USB printer" -msgstr ", USB štampač" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right \"Windows\" key" -msgstr "Desni \"Windows\" taster" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check empty password in /etc/shadow." -msgstr "ukoliko je podešeno na da, prverite praznu lozinku u /etc/shadow." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Before continuing, you should carefully read the terms of the license. It\n" -"covers the entire Mandrake Linux distribution. If you do agree with all the\n" -"terms in it, check the \"%s\" box. If not, simply turn off your computer." -msgstr "" -"Pre nego što nastavite pažljivo pročitajte uslove licence. Ona\n" -"pokriva celu Mandrake Linux distribuciju, i ukoliko se slažete\n" -"sa svim uslovima koji se nalaze u njoj, kliknite na \"Prihvatam\" taster\n" -"Ukoliko ne prihvatate, jednostavno isključite \n" -"računar." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Here is a list of the available printing options for the current printer:\n" -"\n" -msgstr "" -"Ovde se nalazi lista dostupnih opcija za štampanje za tekući štampač:\n" -"\n" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolutions" -msgstr "Rezolucija" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"drakfirewall configurator\n" -"\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful and dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" -"drakfirewall konfigurator\n" -"\n" -"On konfiguriše lični firewall za ovu Mandrake Linux mašinu.\n" -"Za moćno firewall rešenje, pogledajte\n" -"specijalizovanu MandrakeSecurity Firewall distribuciju." - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "" -"Please enter your username, password and domain name to access this host." -msgstr "" -"Unesite svoje korisničko ime, lozinku i domen da bi mogli da pristupite " -"hostu." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Remove selected host" -msgstr "Ukloni selektovanog hosta" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Network configuration" -msgstr "Podešavanje mreže" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _jaz drives" -msgstr "/Autodetekcija _jaz uređaja" - -#: ../../any.pm:1 -#, c-format -msgid "No sharing" -msgstr "Nema zajedničkog deljenja" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Move selected rule down one level" -msgstr "Spusti odabrano pravilo za jedan nivo" - -#: ../../common.pm:1 -#, c-format -msgid "TB" -msgstr "TB" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "FATAL" -msgstr "FATALNA" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Refresh the list" -msgstr "Osveži listu" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client %s:\n" -" \tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \tdrakTermServ will help create these files." -msgstr "" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"The DHCP server will allow other computer to boot using PXE in the given " -"range of address.\n" -"\n" -"The network address is %s using a netmask of %s.\n" -"\n" -msgstr "" -"DHCP server će omogućiti drugi računarima da startuju koristeći PXE u datom " -"rasponu adresa.\n" -"\n" -"Mrežna adresa %s koristi netmask od %s.\n" -"\n" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Delete" -msgstr "Obriši" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"I can setup your computer to automatically start the graphical interface " -"(XFree) upon booting.\n" -"Would you like XFree to start when you reboot?" -msgstr "" -"Ja mogu podesti vaš računar da automatski podiže X okruženje pri startanju.\n" -"Da li želite X okruženje pri restartu ?" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Build the disk" -msgstr "Kreiraj disk" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Disconnect %s" -msgstr "Diskonektuj %s" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Status:" -msgstr "Status:" - -#: ../../network/network.pm:1 -#, c-format -msgid "HTTP proxy" -msgstr "HTTP proxy" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "SSH Server" -msgstr "SSH Server" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by rsync.\n" -msgstr "\t-Mreža preko rsync.\n" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "European protocol" -msgstr "Evropski protokol" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on server \"%s\"" -msgstr ", štampač \"%s\" na serveru \"%s\"" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Note that currently all 'net' media also use the hard drive." -msgstr "" -"Proverite da li je cron demon uključen u vaše servise. \n" -"\n" -"Možete primetiti da svi 'net' mediji takođe koriste hard disk." - -#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 -#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 -#: ../../standalone/drakauth:1 ../../standalone/drakboot:1 -#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 -#: ../../standalone/draksplash:1 ../../../move/move.pm:1 -#, c-format -msgid "Error" -msgstr "Greška" - -#: ../../any.pm:1 -#, c-format -msgid "allow \"su\"" -msgstr "dozvoli \"su\"" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Australia" -msgstr "Australija" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "please wait during ttmkfdir..." -msgstr "sačekajte, u toku je ttmkfdir..." - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure only card \"%s\"%s" -msgstr "Podesi samo karticu \"%s\"%s" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Level" -msgstr "Nivo" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Change the printing system" -msgstr "Promenite sistem za štampanje" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your system supports multiple head configuration.\n" -"What do you want to do?" -msgstr "" -"Vaš sistem podržava multiple head konfiguraciju.\n" -"Šta želite da uradite?" - -#: ../../partition_table.pm:1 -#, c-format -msgid "mount failed: " -msgstr "montiranje nije uspelo: " - -#: ../../steps.pm:1 -#, c-format -msgid "Configure services" -msgstr "Podesi servise" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Broadcast Address:" -msgstr "Broadcast Adresa:" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "" -"the GNU/Linux kernel needs to run a calculation loop at boot time to " -"initialize a timer counter. Its result is stored as bogomips as a way to " -"\"benchmark\" the cpu." -msgstr "" -"GNU/Linux kernel mora da pokrene računsku petlju pri startanju da bi " -"inicijalizovao brojač vremena. Njegov rezultat je uskladišten kao bogomips " -"kao neka vrsta \"benchmarka\" za procesor." - -#: ../../any.pm:1 -#, c-format -msgid "Image" -msgstr "Slika" - -#: ../../services.pm:1 -#, c-format -msgid "Remote Administration" -msgstr "Udaljena administracija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." -msgstr "Neuspelo dodavanje štampača \"%s\" u Star Office/OpenOffice.org/GIMP" - -#: ../../modules.pm:1 -#, c-format -msgid "" -"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." -msgstr "PCMCIA podrška ne postoji više za 2.2 kernele. Koristite 2.4 kernel." - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Selected All" -msgstr "Selektuj Sve" - -#: ../../printer/data.pm:1 -#, c-format -msgid "CUPS - Common Unix Printing System" -msgstr "CUPS - Opšti Unix-ov sistem za štampanje" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Webmin Service" -msgstr "Webmin Servis" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "device" -msgstr "uređaj" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Enter the directory to save to:" -msgstr "Unesite direktorijum da bi u njega sačuvali:" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Greece" -msgstr "Grčka" - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "All" -msgstr "Sve" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printing system (spooler) do you want to use?" -msgstr "Koji sistem za štampanje (spooler) želite da koristite ?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "July" -msgstr "Jul" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Prints into %s" -msgstr ", štampaj na %s" - -#: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 -#, c-format -msgid "An error occurred" -msgstr "Xm,pojavila se greška" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"This package must be upgraded.\n" -"Are you sure you want to deselect it?" -msgstr "" -"Ovaj paket mora biti ažuriran\n" -"Da li sigurno želite da ga deselektujete ?" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Tamil (Typewriter-layout)" -msgstr "Tamilski (raspored na pisaćoj mašini)" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Use password to authenticate users." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Koristi lozinku za autentifikaciju korisnika." - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Allow/Forbid the list of users on the system on display managers (kdm and " -"gdm)." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli listu korisnika na sistemu u menadžerima za displej (kdm " -"i gdm)." - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "manual" -msgstr "upustvo" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Filename text to search for:" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model, driver" -msgstr "Proizvođač, model i drajver štampača" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "" -"There is no medium or it is write-protected for device %s.\n" -"Please insert one." -msgstr "" -"Medij nije prisutan, ili je zaštićen oid upisa za uređaj %s.\n" -"Molim vas da ga ubacite." - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Directory %s already contains data\n" -"(%s)" -msgstr "" -"Direktorijum %s već sadrži neke podatke\n" -"(%s)" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on NetWare server" -msgstr "Štampač na NetWare serveru" - -#: ../../any.pm:1 -#, c-format -msgid "Give the ram size in MB" -msgstr "Prikaži veličinu RAM-a u Mb" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Friday" -msgstr "Petak" - -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Disconnection from Internet complete." -msgstr "Diskonektovanje za Interneta završeno." - -#: ../../any.pm:1 -#, c-format -msgid "Real name" -msgstr "Pravo ime" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "done" -msgstr "urađeno" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please uncheck or remove it on next time." -msgstr "Deselektujte ili uklonite ih sledeći put." - -#: ../../security/level.pm:1 -#, c-format -msgid "Higher" -msgstr "Višlji" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the partitions you want to format" -msgstr "Izaberi particije za formatiranje" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"No TV Card has been detected on your machine. Please verify that a Linux-" -"supported Video/TV Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" -"TV kartica na vašem računaru nije detektovana. Proverite da li Linux-" -"supported Video/TV kartica pravilno priključena.\n" -"\n" -"\n" -"Možete posetiti našu bazu podržanog hardvera na:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't find %s on %s" -msgstr "Ne mogu pronađem %s na %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Japanese 106 keys" -msgstr "Japanski 106 tastera" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Could not install the packages needed to share your scanner(s)." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "This will take a few minutes." -msgstr "Ovo će potrajati nekoliko minuta." - -#: ../../lang.pm:1 -#, c-format -msgid "Burkina Faso" -msgstr "Burkina Faso" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "June" -msgstr "Jun" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use scanners on remote computers" -msgstr "Koristi skenere na udaljenim računarima" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Delete selected rule" -msgstr "Izbriši odabrano pravilo" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Accessing printers on remote CUPS servers" -msgstr "Pristupam šampačima na udaljenim CUPS serverima" - -#: ../../any.pm:1 -#, c-format -msgid "Insert a floppy in %s" -msgstr "Ubacite disketu u uređaj %s" - -#: ../../lang.pm:1 -#, c-format -msgid "Maldives" -msgstr "Maldivi" - -#: ../../any.pm:1 -#, c-format -msgid "compact" -msgstr "kompakt" - -#: ../../common.pm:1 -#, c-format -msgid "1 minute" -msgstr "1 minut" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: fat" -msgstr "tip: %s" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "on channel %d id %d\n" -msgstr "na kanalu %d ID %d\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device" -msgstr ", multi-funkcionalni uređaj" - -#: ../../lang.pm:1 -#, c-format -msgid "Laos" -msgstr "Laos" - -#: ../advertising/04-configuration.pl:1 -#, c-format -msgid "" -"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " -"tool to fully adapt your computer to the use you make of it. Configure and " -"customize elements such as the security level, the peripherals (screen, " -"mouse, keyboard...), the Internet connection and much more!" -msgstr "" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Activate/Disable ethernet cards promiscuity check." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Aktiviraj/Deaktiviraj proveru promiskuiteta mrežnih kartica." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no FAT partition to resize (or not enough space left)" -msgstr "" -"Ne postoje FAT particije kojima se može promeniti veličina (ili nema " -"dovoljno slobodnog prostora)" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Up" -msgstr "gore" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Firewall" -msgstr "Zaštitni zid (Firewall)" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Area:" -msgstr "Područje :" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "(E)IDE/ATA controllers" -msgstr "(E)IDE/ATA kontroleri" - -#: ../../fs.pm:1 -#, c-format -msgid "All I/O to the file system should be done synchronously." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer Server" -msgstr "Server štampača:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Custom configuration" -msgstr "Custom konfiguracija" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"Please indicate where the installation image will be available.\n" -"\n" -"If you do not have an existing directory, please copy the CD or DVD " -"contents.\n" -"\n" -msgstr "" -"Ukažite na mesto gde se nalazi instalacioni image.\n" -"\n" -"Ukoliko nemate takav direktorijum, kopirajte sadržaj CD ili DVD diska.\n" -"\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Saint Pierre and Miquelon" -msgstr "Sveti Pjer i Mikelon" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "September" -msgstr "Septembar" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "saving Bootsplash theme..." -msgstr "snimam Bootsplash temu..." - -#: ../../lang.pm:1 -#, c-format -msgid "Portugal" -msgstr "Portugal" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Do you have another one?" -msgstr "Da li imate još jedan?" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", printing to %s" -msgstr ", štampaj na %s" - -#: ../../network/network.pm:1 -#, c-format -msgid "Assign host name from DHCP address" -msgstr "Dodelite ime hosta za DHCP adresu" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to normal mode" -msgstr "Pređi na normalni mod" - -#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Generic" -msgstr "Generic" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Cylinder %d to %d\n" -msgstr "Cilindar %d do %d\n" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "YOUR TEXT HERE" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "New profile..." -msgstr "Novi profil..." - -#: ../../modules/interactive.pm:1 ../../standalone/draksec:1 -#, c-format -msgid "NONE" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which disk do you want to move it to?" -msgstr "Koji disk želite da premestite?" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Display logo on Console" -msgstr "Prikaži logo u konzoli" - -#: ../../any.pm:1 -#, c-format -msgid "Windows Domain" -msgstr "Windows Domen" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Saami (norwegian)" -msgstr "Dvorak (Norveški)" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Interface %s (on network %s)" -msgstr "Interfejs %s (na mreži %s)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "INFO" -msgstr "INFO" - -#: ../../lang.pm:1 -#, c-format -msgid "Wallis and Futuna" -msgstr "Valis i Futuna" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Need to create /etc/dhcpd.conf first!" -msgstr "Prvo morate da kreirate /etc/dhcpd.conf !" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Is FPU present" -msgstr "da je FPU prisutan" - -#: ../../services.pm:1 -#, c-format -msgid "" -"No additional information\n" -"about this service, sorry." -msgstr "" -"žalim ali nema dodatnih informacija\n" -"o ovom servisu." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "There are no scanners found which are available on your system.\n" -msgstr "Nema skenera koji su direktno povezani na vašu mašinu.\n" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Single NIC -->" -msgstr "Build Single NIC -->" - -#: ../../lang.pm:1 -#, c-format -msgid "Marshall Islands" -msgstr "Maršalova Ostrva" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Is this correct?" -msgstr "Da li je ovo ispravno ?" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Windows (FAT32)" -msgstr "Windows(FAT32)" - -#: ../../steps.pm:1 -#, c-format -msgid "Root password" -msgstr "Root lozinka" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build All Kernels -->" -msgstr "Kompajliraj Sve Kernele -->" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "DVDRAM device" -msgstr "uređaj" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report unowned files." -msgstr "ukoliko je podešeno na da, prijavite fajlove bez vlasnika." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You don't have a swap partition.\n" -"\n" -"Continue anyway?" -msgstr "" -"Hm, nema swap particije\n" -"\n" -"Svejedno nastaviti dalje ?" - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "Version: " -msgstr "Verzija: %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Server IP missing!" -msgstr "Nedostaje IP server!" - -#: ../../lang.pm:1 -#, c-format -msgid "Suriname" -msgstr "Surinam" - -#: ../../network/adsl.pm:1 -#, fuzzy, c-format -msgid "Use a floppy" -msgstr "Snimi na disketu" - -#: ../../any.pm:1 -#, c-format -msgid "Enable ACPI" -msgstr "Omogući ACPI" - -#: ../../fs.pm:1 -#, c-format -msgid "Give write access to ordinary users" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Graphical Environment" -msgstr "Grafičko Okruženje" - -#: ../../lang.pm:1 -#, c-format -msgid "Gibraltar" -msgstr "Gilbratlar" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Do nothing" -msgstr "Ne radi ništa" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Delete Client" -msgstr "Obriši Klijenta" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem type: " -msgstr "Vrsta tatotečnog sistema:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting network..." -msgstr "Startujem mrežu ..." - -#: ../../lang.pm:1 -#, c-format -msgid "Vietnam" -msgstr "Vijetnam" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/_Fields description" -msgstr "/_Opis polja" - -#: ../advertising/10-security.pl:1 -#, c-format -msgid "Optimize your security by using Mandrake Linux" -msgstr "Optimizute svoju sigurnost" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"\n" -"\n" -" Thanks:\n" -"\t- LTSP Project http://www.ltsp.org\n" -"\t- Michael Brown <mbrown@fensystems.co.uk>\n" -"\n" -msgstr "" -"\n" -"\n" -" Hvala:\n" -"\t- LTSP Projekat http://www.ltsp.org\n" -"\t- Michael Brown <mbrown@fensystems.co.uk>\n" -"\n" - -#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 -#: ../../standalone/drakperm:1 ../../standalone/draksec:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Help" -msgstr "Pomoć" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check if the network devices are in promiscuous mode" -msgstr "" -"ukoliko je podešeno na da, proverite da li su mrežni uređaji u promiscuous " -"modu." - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Your personal phone number" -msgstr "Vaš lični broj telefona" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which size do you want to keep for Windows on" -msgstr "Koju veličinu želite da zadržite za prozore" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -msgstr "" -"Test stran(ice)a je poslana štampač demonu.\n" -"To može dovesti do malog odlaganja starta štampača.\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Username required" -msgstr "Potrebno je Korisničko ime" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Device" -msgstr "Uređaj: " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Depending on the default language you chose in Section , DrakX will\n" -"automatically select a particular type of keyboard configuration. However,\n" -"you may not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may have a Swiss\n" -"keyboard. Or if you speak English but are located in Quebec, you may find\n" -"yourself in the same situation where your native language and keyboard do\n" -"not match. In either case, this installation step will allow you to select\n" -"an appropriate keyboard from a list.\n" -"\n" -"Click on the \"%s\" button to be presented with the complete list of\n" -"supported keyboards.\n" -"\n" -"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" -"dialog will allow you to choose the key binding that will switch the\n" -"keyboard between the Latin and non-Latin layouts." -msgstr "" -"U principu, DrakX bira desnu tastaturu za vas (u zavisnosti od toga koji\n" -"ste jezik izabrali) i čak i nećete videti ovaj korak. Ipak, može\n" -"se desiti da niste dobili tastaturu koja odgovara vašem jeziku: na\n" -"primer, ukoliko ste Švajcarac koji govori engleski, verovatno ćete želeti\n" -"Švajcarsku tastaturu. Ili ukoliko govorite Engleski ali se nalazite\n" -"u Kvebeku, možete se naći u istoj situaciji. U oba\n" -"slučaja, moraćete da se vratite na ovaj instalacioni korak i izaberete\n" -"odgovarajuću tastaturu sa liste.\n" -"\n" -"Kliknite na taster \"Još\" da bi dobili kompletnu listu\n" -"podržanih tastatura.\n" -"\n" -"Ukoliko izaberete raspored tastature baziran na non-Latin alfabetu, sledeći\n" -"dijalog će vam ponuditi da izaberete kombinaciju tastera koji će služiti\n" -"da menjate Latin i non-Latin rasporede." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB (Windows 9x/NT) Printer Options" -msgstr "SMB (Windows 9x/NT) opcije štampača" - -#: ../../printer/main.pm:1 -#, c-format -msgid "URI: %s" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Valid user list changed, rewriting config file." -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "mkinitrd optional arguments" -msgstr "mkinitrd opcioni argumenti" - -#: ../advertising/03-software.pl:1 -#, c-format -msgid "" -"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " -"Kmail, create your documents with OpenOffice.org." -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Protocol for the rest of the world" -msgstr "Protokol za statak sveta" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print test pages" -msgstr "Ištampaj test stranice" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "Activate now" -msgstr "Aktiviraj sad" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "64 MB or more" -msgstr "64 MB ili više" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Please select the test pages you want to print.\n" -"Note: the photo test page can take a rather long time to get printed and on " -"laser printers with too low memory it can even not come out. In most cases " -"it is enough to print the standard test page." -msgstr "" -"Izaberite test sranicu koju želite da štampate.\n" -"Napomena: Ukoliko se radi o foto test stranici može biti potrebno mnogo više " -"vremena da bi se ištampala a laserski štampači sa malo memorije je čak neće " -"ni ištampati. U većini slučajeva dovoljno je da ištampate standardnu test " -"stranicu." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Please select the device where your %s is attached" -msgstr "Izaberite port na koji je vaš uređaj %s konekovan" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Not formatted\n" -msgstr "Nije formatirano\n" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Periodic Checks" -msgstr "Periodične provere" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "PXE Server Configuration" -msgstr "Podešavanje PXE Servera" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup the system files before:" -msgstr "Backup sistemskih fajlova pre:" - -#: ../../security/level.pm:1 -#, c-format -msgid "" -"This is the standard security recommended for a computer that will be used " -"to connect to the Internet as a client." -msgstr "" -"Ovo je standardno sigurnosno okruženje preporučeno za računare koji će " -"biti koršćeni za vezu sa Internetom ili kao klijent." - -#: ../../any.pm:1 -#, c-format -msgid "First floppy drive" -msgstr "Prvi flopi/disketni uređaj " - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Quit" -msgstr "/Fajl/_Kraj" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak" -msgstr "Dvorak" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose the new size" -msgstr "Izaberite novu veličinu" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Media class" -msgstr "Klasa Medija" - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "You need to log out and back in again for changes to take effect" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is not known by this version of Scannerdrake." -msgstr "%s nije podržan u ovoj verziji Scannerdrake." - -#: ../../lang.pm:1 -#, c-format -msgid "Faroe Islands" -msgstr "Farska Ostrva" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Restart XFS" -msgstr "Restartuj XFS" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add host/network" -msgstr "Dodaj hosa/mrežu" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scannerdrake will not be started now." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Model name" -msgstr "Ime modela" - -#: ../../lang.pm:1 -#, c-format -msgid "Albania" -msgstr "Albanija" - -#: ../../lang.pm:1 -#, c-format -msgid "British Indian Ocean Territory" -msgstr "Britanska Indijska Okeanska Teritorija" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Normal Mode" -msgstr "Normalni Mod" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD-R/DVD-R in drive!" -msgstr "Nema CDR/DVDR u uređaju!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer connection type" -msgstr "Tip konekcije štampača" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "No network adapter on your system!" -msgstr "Nema mrežnog adaptera u vašem sistemu !" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Network %s" -msgstr "Mreža %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Malayalam" -msgstr "Malajski" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s out of range!" -msgstr "Opcije %s van opsega!" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Connect %s" -msgstr "Konektuj %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Restarting CUPS..." -msgstr "Restartujem CUPS..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Scanning/Photo Cards on \"%s\"" -msgstr "Kartice za Štampanje/Skeniranje/Foto na \"%s\"" - -#: ../../../move/move.pm:1 -#, c-format -msgid "Continue without USB key" -msgstr "" - -#: ../../install_steps.pm:1 -#, c-format -msgid "Duplicate mount point %s" -msgstr "Duplirana tačka montiranja %s" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run chkrootkit checks." -msgstr "ukoliko je podešeno na da, pokrenite chkrootkit provere." - -#: ../../network/tools.pm:1 -#, c-format -msgid "Connection Configuration" -msgstr "Konfiguracija Internet konekcije" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|Generic" -msgstr "Nepoznati|Generic" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At the time you are installing Mandrake Linux, it is likely that some\n" -"packages have been updated since the initial release. Bugs may have been\n" -"fixed, security issues resolved. To allow you to benefit from these\n" -"updates, you are now able to download them from the Internet. Check \"%s\"\n" -"if you have a working Internet connection, or \"%s\" if you prefer to\n" -"install updated packages later.\n" -"\n" -"Choosing \"%s\" will display a list of places from which updates can be\n" -"retrieved. You should choose one nearer to you. A package-selection tree\n" -"will appear: review the selection, and press \"%s\" to retrieve and install\n" -"the selected package(s), or \"%s\" to abort." -msgstr "" -"U vreme kada budete instalirali Mandrake Linux, vrlo je moguće da će neki\n" -"paketi biti ažurirani u odnosu na inicijalno izdanje. Neki bagovi mogu \n" -"biti ispravljeni, a sigurnosni propusti zatvorene. Da bi mogli da koristite " -"ove novije verzije\n" -"mi vam predlažemo da ih skinete sa Interneta. Izaberite\n" -"Da ili \"Da\" ukoliko imate podešenu Internet konekciju, ili Ne ili \"No\" " -"ukoliko više volite da\n" -"instalirate te nove pakete kasnije.\n" -"\n" -"Izborom na \"Da\" prikazuje se lista mesta sa kojih možete da dobavite noe " -"verzije \n" -"paketa. Izaberite mesto koje vam je najbliže. Zatim će se pojaviti stablo sa " -"slelekcijom paketa:\n" -"pregledajte selekciju, i pritisnite \"Instaliraj\" da bi skinuli i\n" -"instalirali selektovni(e) paket(e), ili \"Poništi\" za odustajanje." - -#: ../../lang.pm:1 -#, c-format -msgid "Myanmar" -msgstr "Mianmar (Burma)" - -#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 -#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 -#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Quit" -msgstr "Kraj" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Auto allocate" -msgstr "Auto dislociranje" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Check bad blocks?" -msgstr "Proveri loše blokove ?" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Other MultiMedia devices" -msgstr "Drugi multimedijalni uređaji" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "burner" -msgstr "Štampač" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Bug Description/System Information" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid " (Default is all users)" -msgstr "Default štampač" - -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "No remote machines" -msgstr "Nema udaljenih mašina" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." -msgstr "" -"\n" -"Dobrodošli u Čarobnjak za podešavanje štampača\n" -"\n" -"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na " -"ovaj računar, poezan direktno na mrežu.\n" -"\n" -"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar " -"kao i u električno napajanje da bi mogli biti auto-detektovani.\n" -"\n" -"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne želite da sada " -"podešavate vaš štampač(e)." - -#: ../../any.pm:1 -#, c-format -msgid "Authentication NIS" -msgstr "NIS Autentifikacija" - -#: ../../any.pm:1 -#, c-format -msgid "" -"Option ``Restrict command line options'' is of no use without a password" -msgstr "" -"Opcija``Ograničena komandna linika - opcije'' je neupotrebljiva bez lozinke" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently enabled" -msgstr "Deljenje internet konekcije je trenutno omogućeno " - -#: ../../lang.pm:1 -#, c-format -msgid "United Arab Emirates" -msgstr "Ujedinjeni Arapski Emirati" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_0" -msgstr " IO_0 kartice" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Local Config" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Thailand" -msgstr "Tajland" - -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_1" -msgstr "IO_1 kartice" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Search:" -msgstr "Traži:" - -#: ../../lang.pm:1 -#, c-format -msgid "Kazakhstan" -msgstr "Kazahstan" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Routers:" -msgstr "Ruteri:" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Write" -msgstr "Upiši %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Display all available remote CUPS printers" -msgstr "prikaži sve dostupne udaljene CUPS štampače" - -#: ../../install_steps_newt.pm:1 -#, c-format -msgid "Mandrake Linux Installation %s" -msgstr "Mandrake Linux Instalacija %s" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Unknown driver" -msgstr "Nepoznati drajver" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Thai keyboard" -msgstr " Thai tastatura" - -#: ../../lang.pm:1 -#, c-format -msgid "Bouvet Island" -msgstr "Ostrva Buve" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Dialup options" -msgstr "Dialup opcije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "If no port is given, 631 will be taken as default." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client system configuration files:\n" -" \tThrough clusternfs, each diskless client can have its own unique " -"configuration files\n" -" \ton the root filesystem of the server. By allowing local client " -"hardware configuration, \n" -" \tclients can customize files such as /etc/modules.conf, /etc/" -"sysconfig/mouse, \n" -" \t/etc/sysconfig/keyboard on a per-client basis.\n" -"\n" -" Note: Enabling local client hardware configuration does enable root " -"login to the terminal \n" -" server on each client machine that has this feature enabled. Local " -"configuration can be\n" -" turned back off, retaining the configuration files, once the client " -"machine is configured." -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Change your Cd-Rom!\n" -"\n" -"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " -"done.\n" -"If you don't have it, press Cancel to avoid installation from this Cd-Rom." -msgstr "" -"Promenite vaš Cd-Rom!\n" -"\n" -"Ubacite vaš CD označen sa \"%s\" u pogon i pritisnite \"U redu\" kada ste " -"spremni.\n" -"Ukoliko ga nemate pritisnite Poništi." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish" -msgstr "Poljski" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Online" -msgstr "Mandrake Online" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by webdav.\n" -msgstr "\t-Mreža preko webdav.\n" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid ", multi-function device on a parallel port" -msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system. Please run the " -"hardware configuration tool." -msgstr "" -"Nije detektovana nijedna mrežna kartica. Pokrenite alat za konfigurisanje " -"hardvera." - -#: ../../network/network.pm:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakgw:1 -#, c-format -msgid "Netmask" -msgstr "Mrežna maska" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "No hard drives found" -msgstr "Nije pronađen hard disk" - -#: ../../mouse.pm:1 -#, c-format -msgid "2 buttons" -msgstr "2 tastera" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech CC Series" -msgstr "Logitech CC serija (serijski)" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "What kind is your ISDN connection?" -msgstr "Kakva je vrsta vaše ISDN kenekcije ?" - -#: ../../any.pm:1 -#, c-format -msgid "Label" -msgstr "Oznaka" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save on floppy" -msgstr "Snimi na disketu" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check open ports" -msgstr "Detektovano na portu %s" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Edit selected printer" -msgstr "Uredi selektovani server" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection" -msgstr "Auto-detekcija štampača" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Which of the following is your ISDN card?" -msgstr "Koja je od ponuđenih vaša ISDN kartica ?" - -#: ../../services.pm:1 -#, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP networks.\n" -"This service provides NFS server functionality, which is configured via the\n" -"/etc/exports file." -msgstr "" -"NFS je popularni protokol za razmenu fajlova preko TCP/IP mreža.\n" -"Ovaj servis omogućava funkcionalnost NFS servera,koji se konfiguriše preko \n" -"/etc/exports datoteke." - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Msec" -msgstr "Msec" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"=> Notice, a label changed:\n" -"%s" -msgstr "" -"=> Napomena, promenjeno ime:\n" -"%s" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Number of capture buffers:" -msgstr "Broj capture buffera :" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (0/1, default `%s') " -msgstr "Vaš izbor? (0/1, default `%s') " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a file system).\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to\n" -"erase any data they contain. If you wish to do that, please select those\n" -"partitions as well.\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" -"reformat partitions containing data that you wish to keep (typically\n" -"\"/home\").\n" -"\n" -"Please be careful when selecting partitions. After formatting, all data on\n" -"the selected partitions will be deleted and you will not be able to recover\n" -"it.\n" -"\n" -"Click on \"%s\" when you are ready to format partitions.\n" -"\n" -"Click on \"%s\" if you want to choose another partition for your new\n" -"Mandrake Linux operating system installation.\n" -"\n" -"Click on \"%s\" if you wish to select partitions that will be checked for\n" -"bad blocks on the disk." -msgstr "" -"Svaka particija koja je novodefinisana mora biti\n" -"formatirana za uptrebu (formatiranje znači kreiranje datotečnog(fajl) " -"sistema).\n" -"\n" -"Sada možda želite da reformatirate postojeće particije da bi izbrisali\n" -"podatke koje sadrže. Ukoliko želite to, izaberite particije \n" -"koje želite da formatizujete.\n" -"\n" -"\n" -"Zapamtite da nije potrebno da reformatirate sve postojeće particije.\n" -"Morate da reformatirate particije koje sadrže operativni sistem \n" -"(kao što su \"/\", \"/usr\" ili \"/var\") ali ne morate da reformatirate " -"particije koje sadrže podatke\n" -"koje želite da zadržite (obično /home).\n" -"\n" -"Pazite pri biranju particija, posle formatiranja, sv podaci će \n" -"biti izbrisani i nećete ih moći povratiti.\n" -"\n" -"Kliknite na \"Sledeće ->\" kada bude spremni da formatirate particije\n" -"\n" -"Kliknite na \"<- Prethodno\" ako želite da izaberete drugu particiju za svoj " -"novi\n" -"Mandrake Linux sistem.\n" -"\n" -"Kliknite na \"Napredno\" ukoliko želite da izaberete particije koje će biti " -"proverene\n" -"da li imaju loše sektore." - -#: ../../keyboard.pm:1 -#, c-format -msgid "French" -msgstr "Francuski" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Czech (QWERTY)" -msgstr "Češki (QWERTY)" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Allow X Window connections" -msgstr "Winmodem konekcija" - -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Hardware probing in progress" -msgstr "Detekcija hardvera u toku" - -#: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "Net Device" -msgstr "Xinetd Servis" - -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Summary" -msgstr "Sažetak" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " -"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." -msgstr "" -" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, " -"LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/" -"lp1, ...)." - -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Next" -msgstr "Sledeći" - -#: ../../bootloader.pm:1 -#, c-format -msgid "You can't install the bootloader on a %s partition\n" -msgstr "Ne možete da instalirate starter na particiju %s\n" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "CHAP" -msgstr "CHAP" - -#: ../../lang.pm:1 -#, c-format -msgid "Puerto Rico" -msgstr "Porto Riko" - -#: ../../network/network.pm:1 -#, c-format -msgid "(bootp/dhcp/zeroconf)" -msgstr "(bootp/dhcp/zeroconf)" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"\n" -"Welcome.\n" -"\n" -"The parameters of the auto-install are available in the sections on the left" -msgstr "" -"\n" -"Doborodošli.\n" -"\n" -"Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"package 'ImageMagick' is required to be able to complete configuration.\n" -"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" -msgstr "" -"paket 'ImageMagick' je potreban da pravilan rad.\n" -"Kliknite na \"U redu\" za bi instalirali 'ImageMagick' ili \"Poništi\" za " -"kraj" - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "Telnet server" -msgstr "X server" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"number row\" QWERTY" -msgstr "Litvanski \"number row\"QWERTY" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"The following packages will be removed to allow upgrading your system: %s\n" -"\n" -"\n" -"Do you really want to remove these packages?\n" -msgstr "" -"Sledeći paketi će biti uklonjeni da bi sistem mogao da se ažurira: %s\n" -"\n" -"\n" -"Da li zaista želite da uklonite ove pakete?\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Anguilla" -msgstr "Anigla" - -#: ../../any.pm:1 -#, c-format -msgid "NIS Domain" -msgstr "NIS Domen" - -#: ../../lang.pm:1 -#, c-format -msgid "Antarctica" -msgstr "Antartik" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- User Files:\n" -msgstr "" -"\n" -"- Korisnički fajlovi:\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mount options" -msgstr "Opcije montiranja" - -#: ../../lang.pm:1 -#, c-format -msgid "Jamaica" -msgstr "Jamajka" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Assign raw devices to block devices (such as hard drive\n" -"partitions), for the use of applications such as Oracle or DVD players" -msgstr "" -"Dodeljuje raw urećaje za blok urećaje (kao što su hard disk\n" -"particije), što mođe biti korisno za aplikacije kao što je Oracle ili DVD " -"plejeri" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Please wait, preparing installation..." -msgstr "Samo momenat, pripremam instalaciju" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Czech (QWERTZ)" -msgstr "Češki (QWERTZ)" - -#: ../../network/network.pm:1 -#, c-format -msgid "Track network card id (useful for laptops)" -msgstr "Track mrežna kartica id (korisno za laptop računare)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The port number should be an integer!" -msgstr "Broj porta bi trebao da bude broj !" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "You must choose an image file first!" -msgstr "Morate izabrati prvo sliku!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore from Hard Disk." -msgstr "Povrati (restore) sa Hard Diska" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Add to LVM" -msgstr "Dodaj na LVM" - -#: ../../network/network.pm:1 -#, c-format -msgid "DNS server" -msgstr "DNS server" - -#: ../../lang.pm:1 -#, c-format -msgid "Trinidad and Tobago" -msgstr "Trinidad i Tobago" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "LPD and LPRng do not support IPP printers.\n" -msgstr "LPD i LPRng ne podržavaju IPP štampače.\n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Host name or IP." -msgstr "Ime hosta:" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Edit" -msgstr "/_Izmeni" - -#: ../../fsedit.pm:1 -#, c-format -msgid "simple" -msgstr "jednostavno" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Clear all" -msgstr "Očisti sve" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No test pages" -msgstr "Bez test stranice" - -#: ../../lang.pm:1 -#, c-format -msgid "Falkland Islands (Malvinas)" -msgstr "Foklandska Ostrva" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Adapter %s: %s" -msgstr "Adapter %s: %s" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Boot disk creation" -msgstr "Kreiranje boot diska" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Monday" -msgstr "Ponedeljak" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Unknown model" -msgstr "Nepoznati model" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check files/directories writable by everybody." -msgstr "" -"ukoliko je podešeno na da, označite fajlove/diretorijume upisivim za sve " -"korisnike." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "authentication" -msgstr "Autentifikacija" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now" -msgstr "Backup Sad" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_File" -msgstr "/_Fajl" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing printer from Star Office/OpenOffice.org/GIMP" -msgstr "Uklanjanje štampača iz Star Office/OpenOffice.org/GIMP" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Launch packet filtering for Linux kernel 2.2 series, to set\n" -"up a firewall to protect your machine from network attacks." -msgstr "" -"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n" -"firewall radi zaštite vaše mašine od mrežnih napada." - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Editable" -msgstr "onemogući" - -#: ../../network/ethernet.pm:1 -#, fuzzy, c-format -msgid "Which dhcp client do you want to use ? (default is dhcp-client)" -msgstr "Kog dhcp klijenta želite da koristite ?Postavljeni je dhcp-client" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Tamil (ISCII-layout)" -msgstr "Tamilski (ISCII-raspored)" - -#: ../../lang.pm:1 -#, c-format -msgid "Mayotte" -msgstr "Majot" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Set shell commands history size. A value of -1 means unlimited." -msgstr "" -"Argumenti: (size)\n" -"\n" -"Podesite shell veličinu istorije za komande. Vrednost -1 znači da nema " -"linita." - -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "%d KB\n" -msgstr "Veličina: %d KB\n" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Creating auto install floppy..." -msgstr "Kreiram auto instalacioni flopi" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for scanners ..." -msgstr "Tražim skenere ..." - -#: ../../lang.pm:1 -#, c-format -msgid "Russia" -msgstr "Rusija" - -#: ../../steps.pm:1 -#, c-format -msgid "Partitioning" -msgstr "Particionisanje" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ethernet card(s) detected" -msgstr "detektovana mrežna kartica(e)" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Syslog" -msgstr "Dzyslog" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't create catalog!" -msgstr "Ne mogu da kreiram katalog!" - -#: ../advertising/11-mnf.pl:1 -#, c-format -msgid "" -"Complete your security setup with this very easy-to-use software which " -"combines high performance components such as a firewall, a virtual private " -"network (VPN) server and client, an intrusion detection system and a traffic " -"manager." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Not enough free space for auto-allocating" -msgstr "Nema dovoljno slobodnog prostora za auto-alociranje" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Set root password" -msgstr "Unesi root lozinku" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Enable IP spoofing protection" -msgstr "" -"Argumenti: (arg, alert=1)\n" -"\n" -"Omogući/Onemogući IP spoofing zaštitu." - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "" -"There's no free driver for your sound card (%s), but there's a proprietary " -"driver at \"%s\"." -msgstr "" -"Ne postoji besplatan drajver za vašu zvučnu karticu (%s), ali postoji " -"licencirani drajver na \"%s\"." - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Group :" -msgstr "grupa:" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After resizing partition %s, all data on this partition will be lost" -msgstr "Posle promene veličine %s particije svi podaci će biti izbrisani" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet connection configuration" -msgstr "Konfiguracija Internet konekcija" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "Add the name as an exception to the handling of password aging by msec." -msgstr "" -"Argumenti: (name)\n" -"\n" -"Add the name as an exception to the handling of password aging by msec." - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "USB" -msgstr "LSB" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels" -msgstr "Skeniranje za TV kanale" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Kernel:" -msgstr "Kernel:" - -#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_About..." -msgstr "/_O..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bengali" -msgstr "Bengalski" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Preference: " -msgstr "Karakteristike: " - -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services: %d activated for %d registered" -msgstr "Servisi: %d aktiviranih za %d registrovanih" - -#: ../../any.pm:1 -#, c-format -msgid "Create a bootdisk" -msgstr "Napravi startni disk" - -#: ../../lang.pm:1 -#, c-format -msgid "Solomon Islands" -msgstr "Solomonova Ostrva" - -#: ../../standalone/mousedrake:1 -#, fuzzy, c-format -msgid "Please test your mouse:" -msgstr "Molim Vas da testirate miša" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "(module %s)" -msgstr "(modul %s)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Workgroup" -msgstr "Radna grupa(Workgroup):" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP" -msgstr "Ime hosta ili IP za štampač" - -#: ../../standalone/drakconnect:1 -#, fuzzy, c-format -msgid "down" -msgstr "urađeno" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Path or Module" -msgstr "Putanja do hosta ili Modul" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer should contain only letters, numbers and the underscore" -msgstr "Ime štampača treba da sadrži samo slova, brojeve i underscore" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Show current interface configuration" -msgstr "Prikaži trenutnu konfiguraciju" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Add Printer" -msgstr "Štampač" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"The argument specifies if clients are authorized to connect\n" -"to the X server from the network on the tcp port 6000 or not." -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Argument određuje da li klijent autorzivan za konekovanje na\n" -"X server na tcp portu 6000 ili nije." - -#: ../../help.pm:1 -#, c-format -msgid "Development" -msgstr "Razvojna" - -#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Done" -msgstr "Urađeno" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Web Server" -msgstr "Veb Server" - -#: ../../lang.pm:1 -#, c-format -msgid "Chile" -msgstr "Čile" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tDo not include System Files\n" -msgstr "\tNe uključuj Sistemske Fajlove\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The inkjet printer drivers provided by Lexmark only support local printers, " -"no printers on remote machines or print server boxes. Please connect your " -"printer to a local port or configure it on the machine where it is connected " -"to." -msgstr "" -"Drajveri za inkjet štampače koje je obezbedio Lexmark samo podržavaju " -"lokalne štampače, a ne i štampače na udaljenim mašinama ili print serverima. " -"Povežite vaš štampač na lokalni port ili ga podesite na mašini na koju je " -"povezan." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Your multi-function device was configured automatically to be able to scan. " -"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " -"scanner when you have more than one) from the command line or with the " -"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " -"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" -"\" menu. Call also \"man scanimage\" on the command line to get more " -"information.\n" -"\n" -"Do not use \"scannerdrake\" for this device!" -msgstr "" -"Vaš multi-funkcionalni uređaj je automatski podešen da bi mogao da skenira. " -"Sada možete da skenirate sa \"scanimage\" (\"scanimage -d hp:%s\" da bi " -"odredili skener koda imate više od jednog) iz komandne linije ili sa " -"grafičkim interfejsima \"xscanimage\" ili \"xsane\". Ukoliko koristite the " -"GIMP, možete takođe skenirati biranjem odgovarajuće stavke u \"File\"/" -"\"Acquire\" meniju. Pogledajte i \"man scanimage\" u komandnoj liniji za " -"više informacija.\n" -"\n" -"Ne koristi \"scannerdrake\" za ovaj uređaj!" - -#: ../../any.pm:1 -#, c-format -msgid "(already added %s)" -msgstr "(%s već postoji)" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Bootloader installation in progress" -msgstr "Instalacija startera" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", using command %s" -msgstr ", koristim komandu %s" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Alt and Shift keys simultaneously" -msgstr "Alt i Shift tasteri istovremeno" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Flags" -msgstr "Zastave" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Users" -msgstr "Dodaj/Izbriši Korisnike" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host/network IP address missing." -msgstr "Nedostaje host/mrežna IP adresa." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "weekly" -msgstr "nedeljno" - -#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Settings" -msgstr "Opcije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The entered host/network IP is not correct.\n" -msgstr "Unešena host/mrežna IP adresa nije ispravna.\n" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Create/Transfer backup keys for SSH" -msgstr "" -"Kreiraj/Prebaci\n" -"backup tastere na SSH" - -#: ../../any.pm:1 -#, c-format -msgid "Here is the full list of available countries" -msgstr "Ovde je predstavljena cela lista dostupnih zemalja" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (A4)" -msgstr "Alteernativna test stranica (A4)" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"If you have all the CDs in the list below, click Ok.\n" -"If you have none of those CDs, click Cancel.\n" -"If only some CDs are missing, unselect them, then click Ok." -msgstr "" -"Ukoliko imate gore navedene CD-ove, kliknite na Ok.\n" -"Ukoliko nemate nijedan CD, kliknite na Cancel.\n" -"Ako vam nedostaju samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok." - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Wait please" -msgstr "Molim Vas sačekajte" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "PAP" -msgstr "PAP" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup user files" -msgstr "Backup-uj korisničke fajlove" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "New" -msgstr "Novi" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"Root\" is the system\n" -"administrator and is the only user authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if the password that you chose too easy. As you\n" -"can see, you are not forced to enter a password, but we strongly advise you\n" -"against this. GNU/Linux is just as prone to operator error as any other\n" -"operating system. Since \"root\" can overcome all limitations and\n" -"unintentionally erase all data on partitions by carelessly accessing the\n" -"partitions themselves, it is important that it be difficult to become\n" -"\"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password -- it makes it far\n" -"too easy to compromise a system.\n" -"\n" -"One caveat -- do not make the password too long or complicated because you\n" -"must be able to remember it!\n" -"\n" -"The password will not be displayed on screen as you type it in. To reduce\n" -"the chance of a blind typing error you will need to enter the password\n" -"twice. If you do happen to make the same typing error twice, this\n" -"``incorrect'' password will be the one you will have use the first time you\n" -"connect.\n" -"\n" -"If you wish access to this computer to be controlled by an authentication\n" -"server, click the \"%s\" button.\n" -"\n" -"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" -"services, select the appropriate one for \"%s\". If you do not know which\n" -"one to use, you should ask your network administrator.\n" -"\n" -"If you happen to have problems with remembering passwords, if your computer\n" -"will never be connected to the internet or that you absolutely trust\n" -"everybody who uses your computer, you can choose to have \"%s\"." -msgstr "" -"Ovo je najzanačajnija tačka u odlučivanju o sigurnosti vašeg GNU/Linux\n" -"sistema: morate da unesete \"root\" lozinku. \"root\" je administrator\n" -"sistema i jedini je ovlašten da vrši izmene, dodaje korisnike,\n" -"menja osnovnu konfiguraciju sistema, itd. Ukratko, \"root\" može\n" -"da uradi sve! Zbog toga morate da izaberete lozinku koja teško može da se\n" -"pogodi - DrakX će vam reći ukoliko je ona suviše jednostavna. Kao što možete " -"da vidite, možete da\n" -"izaberete i da ne unesete lozinku, ali vam ozbiljno preporučujemo da to\n" -"neradite iz jednog razloga: nemojte da mislite da to što ste startovali GNU/" -"Linux da\n" -"vaši drugi operativni sistemi sigurni od grešaka. Kako \"root\" može da\n" -"preskoči sva ograničenja i nenamerno izbriše sve podatke na particiji\n" -"neopreznim pristupom, važno je da je teško\n" -"postati \"root\".\n" -"\n" -"Lozinka treba da bude mešavina brojeva i slova i treba da sadrži najmanje 8\n" -"karaktera. Nikada ne zapisujte na papir \"root\" lozinku - tako lako\n" -"možete ugroziti sistem.\n" -"\n" -"Međutim, potrudite se da lozinka ne bude previše duga ili komlikovana zato\n" -"što treba da je zapamtite bez mnogo napora.\n" -"\n" -"Lozinka neće biti prikazana na ekranu kada je ukucavate. Srećom, moći ćete\n" -"da je ukucate dva puta da bi smanjili mogućnost greše u kucanju.\n" -"Ukoliko ipak pogrešite u kucanju, ali dva puta, ova\n" -"``neispravna'' lozinka će biti korištena kada se budete prvi put " -"konektovali.\n" -"\n" -"U Ekspertnomm modu, bićete pitani da li ćete se konektovati na\n" -"autentifikacioni server, kao što je NIS ili LDAP.\n" -"\n" -"Ukoliko vaša mreža koristi LDAP (ili NIS) protokol za autentifikaciju, " -"selektujte\n" -"\"LDAP\" (ili \"NIS\") za autentifikaciju. Ukoliko to neznate, pitajte\n" -"vašeg mrežnog administratora.\n" -"\n" -"Ukoliko se vaš računar ne konektuje na administrirane mreže, treba da\n" -"izaberete \"Lokalni fajlovi\" za autentifikaciju." - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Name resolution spoofing protection" -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, DrakX will allow you to choose the security level desired\n" -"for the machine. As a rule of thumb, the security level should be set\n" -"higher if the machine will contain crucial data, or if it will be a machine\n" -"directly exposed to the Internet. The trade-off of a higher security level\n" -"is generally obtained at the expense of ease of use.\n" -"\n" -"If you do not know what to choose, stay with the default option." -msgstr "" -"na ovom mestu, DrakX će vam dozvoliti da odredite željeni nivo sigurnosti\n" -"za vaš računar. Kao nepisano pravilo, nivo sigurnosti bi trebao\n" -"veći ukoliko mašina sadrži važne podatke, ili ukoliko je mašina\n" -"direktno vezana na Internet. Spuštanje sigurnosti uglavnom\n" -"se vidi u opvećanju lakoće rada sa sistemom. Pogledajte \"msec\"\n" -"poglavlje u ``Upupstvo za komandnu liniju''da bi dobavili više informacija\n" -"o nivioima sigurnosti.\n" -"\n" -"Ukoliko ne znate da izaberete, zadržite default postavku." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Load from floppy" -msgstr "Učitaj sa diskete" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The following printer was auto-detected. " -msgstr "Sledeći štamač je auto-detektovan." - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Uses command %s" -msgstr ", koristim komandu %s" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot Floppy" -msgstr "Boot Floppy" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Norwegian" -msgstr "Norveški" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for new scanners ..." -msgstr "Tražim nove skenere ..." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Apache World Wide Web Server" -msgstr "Apache World Wide Web Server" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "stepping of the cpu (sub model (generation) number)" -msgstr "Stepping procesora(podmodel (generacija) broj)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "select path to restore (instead of /)" -msgstr "izaberite putanju za obnavljanje (umesto /)" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Configure bootsplash picture" -msgstr "Podesite bootsplash sliku" - -#: ../../lang.pm:1 -#, c-format -msgid "Georgia" -msgstr "Gruzija" - -#: ../../lang.pm:1 -#, c-format -msgid "China" -msgstr "Kina" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Make sure that all your printers are connected and turned on).\n" -msgstr " (Proverite da li su svi štampači povezani i uključeni).\n" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Reading data of installed printers..." -msgstr "Čitam podatke sa instaliranih štampača..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Erase Now " -msgstr "Obriši odmah " - -#: ../../fsedit.pm:1 -#, c-format -msgid "server" -msgstr "server" - -#: ../../install_any.pm:1 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s" -msgstr "Ubacite FAT formatiranu praznu disketu u uređaj %s" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "yes means the processor has an arithmetic coprocessor" -msgstr "da znači da procesor ima aritmetički koprocesor" - -#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Please Wait... Applying the configuration" -msgstr "Samo momenat... primena konfiguracije" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Welcome to GRUB the operating system chooser!" -msgstr "Dobrodosli u GRUB starter operativnog sistema !" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Grub" -msgstr "Grub" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SCSI controllers" -msgstr "SCSI kontroleri" - -#: ../../printer/main.pm:1 -#, c-format -msgid " on LPD server \"%s\", printer \"%s\"" -msgstr "na LPD serveru \"%s\", štampač \"%s\"" - -#: ../../standalone/drakedm:1 -#, c-format -msgid "Choosing a display manager" -msgstr "Izbor menadžera za displej" - -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Zeroconf Host name" -msgstr "Zeroconf ime domaćina (Host name)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom setup/crontab entry:" -msgstr "" - -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address should be in format 1.2.3.4" -msgstr "IP adresa treba da bude u formatu 1.2.3.4" - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Configure CUPS printing system" -msgstr "Promenite sistem za štampanje" - -#: ../../lang.pm:1 -#, c-format -msgid "Ecuador" -msgstr "Ekvador" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Add an item" -msgstr "Dodaj vrednost" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printers on this machine are available to other computers" -msgstr "Štampači na ovoj mašini su dostupni za ostale računare" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "China (Hong Kong)" -msgstr "Hong Kong" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "I can't find needed image file `%s'." -msgstr "Ne mogu da pronađem potrebni image fajl `%s'." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No sound card detected. Try \"harddrake\" after installation" -msgstr "" -"Nije detektovana zvučna kartica. Pokrenite \"harddrake\" nakon instalacije" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"Invalid port given: %s.\n" -"The proper format is \"port/tcp\" or \"port/udp\", \n" -"where port is between 1 and 65535." -msgstr "" -"Dat je pogrešan port: %s.\n" -"Pravilan format je \"port/tcp\" ili \"port/udp\", \n" -"gde je port između 1 i 65535." - -#: ../../any.pm:1 -#, c-format -msgid "Shell" -msgstr "Shell" - -#: ../../lang.pm:1 -#, c-format -msgid "Sao Tome and Principe" -msgstr "Sao Tome i Principe" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "PCI" -msgstr "PCI" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Can't login using username %s (bad password?)" -msgstr "Ne mogu da ulogujem korisničko ime %s (neispravna lozinka?)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Azerbaidjani (latin)" -msgstr "Azerbejdzan (latinica)" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Package not installed" -msgstr "Paket nije instaliran" - -#: ../../lang.pm:1 -#, c-format -msgid "American Samoa" -msgstr "Američka Samoa" - -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "Become a MandrakeExpert" -msgstr "Postanite MandrakeExpert" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Protocol" -msgstr "Protokol" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Copy fonts on your system" -msgstr "Kopiraj fontove u sistem" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Harddrake help" -msgstr "Harddrake pomoć" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bogomips" -msgstr "Bogomips" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Mandrake Terminal Server Configuration" -msgstr "Konfiguracija Mandrake Terminalnog servera" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -" DrakBackup Report Details\n" -"\n" -"\n" -msgstr "" -"\n" -" DrakBackup Detalji Izveštaja\n" -"\n" -"\n" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore all backups" -msgstr "Obnovi sve backup-ove" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid " on parallel port #%s" -msgstr " na parelelnom portu #%s" - -#: ../../security/help.pm:1 -#, fuzzy, c-format -msgid "" -"Set the password minimum length and minimum number of digit and minimum " -"number of capitalized letters." -msgstr "" -"Argumenti: (length, ndigits=0, nupper=0)\n" -"\n" -"Podesite najmanju dužinu lozinke i najmanji broj brojeva i minimalan broj " -"velikih slova." - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check open ports." -msgstr "ukoliko je podešeno na da, označite otvorene portove." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to erase the media." -msgstr "Brisanje medija može da potraje manje vremena." - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't select/unselect this package" -msgstr "Ne možete selektovati/deselektovati ovaj paket" - -#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Warning" -msgstr "Upozorenje" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Other Files:\n" -msgstr "" -"\n" -"- Ostali fajlovi:\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name" -msgstr "Ime udaljenog host-a" - -#: ../../any.pm:1 -#, c-format -msgid "access to X programs" -msgstr "pristup X programima" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Computing the size of the Windows partition" -msgstr "Proračunavam veličinu Windows particije" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Refresh" -msgstr "/_Osveži" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Italy" -msgstr "Italija" - -#: ../../lang.pm:1 -#, c-format -msgid "Cayman Islands" -msgstr "Kajmanska Ostrva" - -#: ../../fs.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "error unmounting %s: %s" -msgstr "Greška pri demontiranju %s: %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer" -msgstr "Ime štampača" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "disable" -msgstr "onemogući" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do it!" -msgstr "Uradi to!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s not responding" -msgstr "%s ne odgovara" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select model manually" -msgstr "Ručno izaberite model" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Format" -msgstr "Formatiranje" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "" -"The most common way to connect with adsl is pppoe.\n" -"Some connections use pptp, a few use dhcp.\n" -"If you don't know, choose 'use pppoe'" -msgstr "" -"Najčešći način za konekciju sa adsl je pppoe.\n" -"Međutim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n" -"Ukoliko ne znate koja je, izaberite 'koristi pppoe'" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Various" -msgstr "Razno" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Zip" -msgstr "Zip" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Alt key" -msgstr "Desni Alt taster" - -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Load setting" -msgstr "učitaj postavku" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"Printerdrake could not determine which model your printer %s is. Please " -"choose the correct model from the list." -msgstr "" -"\n" -"\n" -"Printerdrake nije mogao da detektuje vaš model štampača %s. Izaberite " -"odgovarajući model sa liste." - -#: ../../standalone/printerdrake:1 -#, fuzzy, c-format -msgid "Set selected printer as the default printer" -msgstr "Podesi ovaj štampač kao default" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Mark the printers which you want to transfer and click \n" -"\"Transfer\"." -msgstr "" -"\n" -"Označite štampače koje želite da prebacite i kliknite na \n" -"\"Prebaci\"." - -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ" -msgstr "PDQ" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Albanian" -msgstr "Albanski" - -#: ../../lang.pm:1 -#, c-format -msgid "Lithuania" -msgstr "Litvanija" - -#: ../../any.pm:1 -#, c-format -msgid "Compact" -msgstr "Kompakt" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected model: %s %s" -msgstr "Detektovani modeli: %s %s" - -#: ../advertising/03-software.pl:1 -#, c-format -msgid "MandrakeSoft has selected the best software for you" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Local files" -msgstr "Lokalne datoteke" - -#: ../../pkgs.pm:1 -#, c-format -msgid "maybe" -msgstr "možda" - -#: ../../lang.pm:1 -#, c-format -msgid "Panama" -msgstr "Panama" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Can't open %s!" -msgstr "Ne mogu pronađem %s na %s" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Your graphic card seems to have a TV-OUT connector.\n" -"It can be configured to work using frame-buffer.\n" -"\n" -"For this you have to plug your graphic card to your TV before booting your " -"computer.\n" -"Then choose the \"TVout\" entry in the bootloader\n" -"\n" -"Do you have this feature?" -msgstr "" -"Vaša grafička kartica izgleda da ima TV-OUT konektor.\n" -"On se može podesiti da radi korišćenjem frame-buffer-a.\n" -"\n" -"Za ovo morate da povežete vašu grafičku karticu sa TV-om pre startanja vašeg " -"kompjutera.\n" -"Onda izaberite \"TVout\" postavku u starteru\n" -"\n" -"Da li imate ovu opciju?" - -#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Monitor" -msgstr "Monitor" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to set up printing to a Windows account with password. Due to " -"a fault in the architecture of the Samba client software the password is put " -"in clear text into the command line of the Samba client used to transmit the " -"print job to the Windows server. So it is possible for every user on this " -"machine to display the password on the screen by issuing commands as \"ps " -"auxwww\".\n" -"\n" -"We recommend to make use of one of the following alternatives (in all cases " -"you have to make sure that only machines from your local network have access " -"to your Windows server, for example by means of a firewall):\n" -"\n" -"Use a password-less account on your Windows server, as the \"GUEST\" account " -"or a special account dedicated for printing. Do not remove the password " -"protection from a personal account or the administrator account.\n" -"\n" -"Set up your Windows server to make the printer available under the LPD " -"protocol. Then set up printing from this machine with the \"%s\" connection " -"type in Printerdrake.\n" -"\n" -msgstr "" -"Upravo treba da podesite štampanje na Windows računu sa lozinkom. Usled " -"greške u arhitekturi Samba klijent softvera lozinka se ostavlja u običnom " -"tekstu u komandnoj liniji Samba klijenta koji se koristi za prenošenje " -"poslova štamapča na Windows server. Tako je moguće da svaki korisnik na ovoj " -"mašini prikaže lozinku na ekranu koristeći se komandom \"ps auxwww\".\n" -"\n" -"mmi vam preporučujemo da koristite jednu od sledećih alternativa (sve u " -"slučaju da ste sigurni da samo mašine sa vaše lokalne mreže mogu pristupiti " -"vašem Windows serveru, recimo u smislu firewall-a):\n" -"\n" -"Koristite račun bez lozinke na vašem Windows serveru, kao \"GUEST\" račun " -"ili specijalan račun kreran za štampanje. Nemojte da uklanjate zaštitu " -"lozinkesa ličnih računa ili računa administratora.\n" -"\n" -"Podesite vaš Windows server da napravi štampače dostupnim pod LPD " -"protokolom. Zatim podesite štampanje sa ove mašine sa \"%s\" tipom konekcije " -"u Printerdrake-u.\n" -"\n" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "65 thousand colors (16 bits)" -msgstr "65 hiljada boja (16-bitna paleta)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save on Hard drive on path: %s\n" -msgstr "" -"\n" -"- Snimi na Hard Disk na putanju: %s\n" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove fonts on your system" -msgstr "Ukloni fontove iz sistema" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Warning, the network adapter (%s) is already configured.\n" -"\n" -"Do you want an automatic re-configuration?\n" -"\n" -"You can do it manually but you need to know what you're doing." -msgstr "" -"Upozorenje, mrežni adapter (%s) ije već podešen.\n" -"\n" -"Da li želite da ga automatski prekonfigurišete?\n" -"\n" -"Možete to učiniti ručno ali morate da znate šta radite." - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphical interface at startup" -msgstr "X okruženje na startu" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid " adsl" -msgstr "" - -#: ../../raid.pm:1 -#, c-format -msgid "Not enough partitions for RAID level %d\n" -msgstr "Nema dovoljno particija za RAID nivo %d\n" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "format of floppies supported by the drive" -msgstr "Format disketa koje uređaj prihvata" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Firmware copy failed, file %s not found" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "local config: true" -msgstr "nije podešeno" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The following printers are configured. Double-click on a printer to change " -"its settings; to make it the default printer; or to view information about " -"it." -msgstr "" -"Sledeći štaThe following printers are configured. Double-click on a printer " -"to change its settings; to make it the default printer; or to view " -"information about it." - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connected" -msgstr "Konektovan" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Macedonian" -msgstr "Makedonski" - -#: ../../lang.pm:1 -#, c-format -msgid "Mali" -msgstr "Mali" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Bridges and system controllers" -msgstr "Mostovi i sistemski kontroleri" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Save" -msgstr "/Datoteka/_Snimi" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "No details" -msgstr "Bez detalja" - -#: ../../pkgs.pm:1 -#, c-format -msgid "very nice" -msgstr "veoma lepo" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Preview" -msgstr "Pregled" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Remote Control" -msgstr "Udaljena kontrola" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select media for backup..." -msgstr "Izaberite medij koji želite da korisitite za backup..." - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Wrong email" -msgstr "" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree86 server: %s\n" -msgstr "XFree86 server: %s\n" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Allow Thin Clients" -msgstr "Dozvoli Thin Klijente" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Russian\" layout)" -msgstr "Gruzijski (\"Ruski\" raspored)" - -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Options" -msgstr "/_Opcije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Your printer model" -msgstr "Vaš model štampača" - -#: ../../any.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"(WARNING! You're using XFS for your root partition,\n" -"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" -"because XFS needs a very large driver)." -msgstr "" -"\n" -"\n" -"(UPOZORENJE! Vi koristite XFS za vašu root particiju,\n" -"pa kreiranje startnog 1.44 Mb flopija verovatno neće uspeti,\n" -"zato što XFS traži veliki drajver)." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Delete hard drive tar files after backup.\n" -msgstr "" -"\n" -"- Obrišite tar fajlove na hard disku posle backup-a.\n" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"No CD or DVD image found, please copy the installation program and rpm files." -msgstr "" -"Nije pronađen CD ili DVD image, kopirajte instalacioni program i rpm fajlove." - -#: ../advertising/04-configuration.pl:1 -#, fuzzy, c-format -msgid "Mandrake's multipurpose configuration tool" -msgstr "Konfiguracija Mandrake Terminalnog servera" - -#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 -#, c-format -msgid "Save" -msgstr "Sačuvaj" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is unsupported" -msgstr "%s nije podržan" - -#: ../../services.pm:1 -#, c-format -msgid "Load the drivers for your usb devices." -msgstr "Podiže drajvere za vaše usb uređaje." - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Disk" -msgstr "Disk" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter a printer device URI" -msgstr "Unesite URI za štampač" - -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "" -"The success of MandrakeSoft is based upon the principle of Free Software. " -"Your new operating system is the result of collaborative work of the " -"worldwide Linux Community." -msgstr "" -"Uspeh MandrakeSoft-a je zasnovan na principu Besplatnog Softvera. Vaš novi " -"operativni sistem je rezultat kolaborativnog rada sa delom svetske Linux " -"Zajednice" - -#: ../../lang.pm:1 -#, c-format -msgid "Israel" -msgstr "Izrael" - -#: ../../lang.pm:1 -#, c-format -msgid "French Guiana" -msgstr "Francuska Gvajana" - -#: ../../lang.pm:1 -#, c-format -msgid "default:LTR" -msgstr "default:LTR" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "A command line must be entered!" -msgstr "Komandna linija mora biti uneta!" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select user manually" -msgstr "Izaberite korisnike ručno" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer printer configuration" -msgstr "Konfiguracija za transfer štampača" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you want to enable printing on the printers mentioned above?\n" -msgstr "Da li želite da omogućite štampanje na gore pomenutim štampačima?\n" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check additions/removals of suid root files" -msgstr "" -"ukoliko je podešeno na da, označite dodavanje/uklanjanje za suid root " -"fajlove." - -#: ../../any.pm:1 -#, c-format -msgid "" -"For this to work for a W2K PDC, you will probably need to have the admin " -"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" -"add and reboot the server.\n" -"You will also need the username/password of a Domain Admin to join the " -"machine to the Windows(TM) domain.\n" -"If networking is not yet enabled, Drakx will attempt to join the domain " -"after the network setup step.\n" -"Should this setup fail for some reason and domain authentication is not " -"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " -"Domain, and Admin Username/Password, after system boot.\n" -"The command 'wbinfo -t' will test whether your authentication secrets are " -"good." -msgstr "" -"Da bi ovo radilo sa W2K PDC, verovatno ćete morati da kao admin pokrenete: C:" -"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /i da " -"restartujete server.\n" -"Takože ćete morati da imate username/password za Domain Admin da bi " -"pristupili mašini koja ima Windows(TM) domen.\n" -"Ukoliko mreža još uvek nije omogućena, Drakx će pokušati da pristupi domenu " -"nakon podešavanja mreže.\n" -"Ukoliko ovo podešavanje ne uspe iz nekog razloga i atuentifikacija domena ne " -"radi, pokrenite 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći vaš Windows" -"(tm) Domen, i Admin Username/Password, nakon startanja sistema.\n" -"Komanda 'wbinfo -t' će testirati da li vaša autentifikacija dobra." - -#: ../../printer/main.pm:1 -#, c-format -msgid "%s (Port %s)" -msgstr "%s (Port %s)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use network connection to backup" -msgstr "Korisiti mrežnu konekciju za backup" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "Kernel version" -msgstr "Verzija kernela" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"to make it simpler to manage the packages have been placed into groups of\n" -"similar applications.\n" -"\n" -"Packages are sorted into groups corresponding to a particular use of your\n" -"machine. Mandrake Linux has four predefined installations available. You\n" -"can think of these installation classes as containers for various packages.\n" -"You can mix and match applications from the various groups, so a\n" -"``Workstation'' installation can still have applications from the\n" -"``Development'' group installed.\n" -"\n" -" * \"%s\": if you plan to use your machine as a workstation, select one or\n" -"more of the applications that are in the workstation group.\n" -"\n" -" * \"%s\": if plan on using your machine for programming, choose the\n" -"appropriate packages from that group.\n" -"\n" -" * \"%s\": if your machine is intended to be a server, select which of the\n" -"more common services you wish to install on your machine.\n" -"\n" -" * \"%s\": this is where you will choose your preferred graphical\n" -"environment. At least one must be selected if you want to have a graphical\n" -"interface available.\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you unselect all groups when performing a regular\n" -"installation (as opposed to an upgrade), a dialog will pop up proposing\n" -"different options for a minimal installation:\n" -"\n" -" * \"%s\": install the minimum number of packages possible to have a\n" -"working graphical desktop.\n" -"\n" -" * \"%s\": installs the base system plus basic utilities and their\n" -"documentation. This installation is suitable for setting up a server.\n" -"\n" -" * \"%s\": will install the absolute minimum number of packages necessary\n" -"to get a working Linux system. With this installation you will only have a\n" -"command line interface. The total size of this installation is about 65\n" -"megabytes.\n" -"\n" -"You can check the \"%s\" box, which is useful if you are familiar with the\n" -"packages being offered or if you want to have total control over what will\n" -"be installed.\n" -"\n" -"If you started the installation in \"%s\" mode, you can unselect all groups\n" -"to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." -msgstr "" -"Sada je vreme da odredimo koje programe želite da instalirate na vaš\n" -"sistem. Postoje hiljade paketa dostupnih za instalaciju na Mandrake Linux, " -"i \n" -"da bi ih učinili dostupnijim, smeđteni su u grupe sličnih aplikacija.\n" -"\n" -"Paketi su sortirani u grupe u odnosu na odgovarajuću upotrebu na vašoj\n" -"mašini. Same grupe su sortirane u četiri klase. Ove klase možete posmatrati\n" -"kao kontejnere za različite pakete\n" -"Možete mešati aplikacije iz različitih kontejnera, tako da\n" -"iinstalacija ``Radna stanica'' može da sadrži aplikacije iz \n" -"kontejnera ``Razvojna stanica'' .\n" -"\n" -" * \"Radna stanica\": ukoliko planirate da koristite vašu mašinu kao radnu " -"stanicu, izaberite jednu ili više odgovarajućih grupa.\n" -"\n" -" * \"Razvojna stanica\": ukoliko mašina treba da se koristi za " -"programiranje, izaberite željenu(e) grupu(e).\n" -"\n" -" * \"Server\": ukoliko će se mašina koristiti kao server, moći ćete da \n" -"izaberete koje od najčešćih servisaželite da instalirate na\n" -"mašinu.\n" -"\n" -" * \"Grafičko Okruženje\": na kraju, ovde ćete izabrati vaše\n" -"omiljeno grafičko okruženje. Morate izabrati bar jedno da bi imali\n" -"grafičku radnu stanicu!\n" -"\n" -"Kretanjem kursora miša preko imena grupe dobićete kratko objašnjenje\n" -"o toj grupi. Ukoliko ne selektujete ni jednu grupu kada izvodite\n" -"osnovnu instalaciju (za razliku od ažuriranja), pojaviće se dijalog\n" -"sa različitim predlozima za minimalnu instalciju:\n" -"\n" -" * \"Sa X-ovima\": Instalira nekoliko paketa radi grafičkog desktopa\n" -"\n" -" * \"Sa osnovnom dokumentacijom\": Instalira osnovni sistem sa osnovnim " -"alatima\n" -"i njihovom dukumentacijom. Ovaj mod je praktičan za\n" -"podešavanje servera\n" -"\n" -" * \"Stvarno minimalna instalacija\":Instalira samo što je minimano " -"potrebno,\n" -"za rad Linux sistema,naravno samo u komandnoj liniji.Ova instalacija " -"zauzima\n" -"samo 65 Mb\n" -"\n" -"Možete selektovati i \"Pojedinačno biranje paketa\", koje je korisno " -"ukoliko\n" -"su vam poznati ponuđeni paketi i želite da imate potpunu \n" -"kontrolu nad svim što će biti instalirano.\n" -"\n" -"Ukoliko ste pokrenuli mod \"Ažuriranje\", možete deselektovati sve\n" -"grupe da bi izbegli instalaciju bilo kog novog paketa. Ovo je korisno za " -"popravljanje ili\n" -"ažuriranje postojećeg sistema." - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Accept user" -msgstr "Prihvati korisnika" - -#: ../../help.pm:1 ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server" -msgstr "Server" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Left Shift key" -msgstr "Levi \"Windows\" taster" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid " local network" -msgstr "Lokalna(e) mreža(e)" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Bad choice, try again\n" -msgstr "Loš izbor, probajte ponovo\n" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Syslog reports to console 12" -msgstr "" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, fuzzy, c-format -msgid "Search new servers" -msgstr "Traži servere" - -#: ../../lang.pm:1 -#, c-format -msgid "Heard and McDonald Islands" -msgstr "Herdova i McDonald Ostrva" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No alternative driver" -msgstr "Nema alternativnog drajvera" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to expert mode" -msgstr "Pređi na ekspert mod" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on this machine)" -msgstr "(na ovoj mašini)" - -#: ../../network/network.pm:1 -#, c-format -msgid "Gateway address should be in format 1.2.3.4" -msgstr "Gateway adresa treba da bude u formatu 1.2.3.4" - -#: ../../network/modem.pm:1 -#, c-format -msgid "" -"\"%s\" based winmodem detected, do you want to install needed software ?" -msgstr "" -"\"%s\" badzirani win modem je detektovan, da li želite da instalirate " -"potreban softver ?" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking at packages already installed..." -msgstr "Tražim već instalirane pakete..." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Differential Backups" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Driver" -msgstr "Drajver" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Linuxconf will sometimes arrange to perform various tasks\n" -"at boot-time to maintain the system configuration." -msgstr "" -"Linuxconf đe ponekad izvoditi razne zadatke tokom\n" -"startanja sistema radi održavanja i podešavanja sistema." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "DVD-R device" -msgstr "uređaj" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer on remote lpd server" -msgstr "Štampač ili Udaljeni lpd server" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "" -"Before installing any fonts, be sure that you have the right to use and " -"install them on your system.\n" -"\n" -"-You can install the fonts the normal way. In rare cases, bogus fonts may " -"hang up your X Server." -msgstr "" -"Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate " -"i koristite na vašem sistemu.\n" -"\n" -"-Možete instalirati fontove na upoobičajeni način. U ređim slučajevimas, " -"bagoviti fontovi mogu srušiti vaš X Server." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" -"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" -"detected and installed in the bootloader menu. If this is not the case, you\n" -"can add an entry by hand in this screen. Be careful to choose the correct\n" -"parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message displayed before the boot prompt.\n" -"\n" -" * Boot Device: indicates where you want to place the information required\n" -"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" -"to hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux;\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second increments\n" -"before your default kernel description is selected;\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" -"Open Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." -msgstr "" -"Yaboot je starter NewWorld MacIntosh hardver. On može da pokrene\n" -"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na vašoj mašini.\n" -"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n" -"instalirani. Ukoliko to nije slučaj, možete ručno dodati unos na ovom\n" -"ekranu. Budite pažljivi pri izboru parametara.\n" -"\n" -"Osnovne opcije Yaboot-a su:\n" -"\n" -" * Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre \n" -"statrtnog\n" -"prompta.\n" -"\n" -" * Boot uređaj: Ukazuje gde želite da smestite informaciju potrebnu za \n" -"startanje GNU/Linux-a. Generalno gledano, moraćete da podesite bootstrap \n" -"\n" -"particiju pre \n" -"nego podesite ovu informaciju.\n" -"\n" -" * Omogući Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n" -"yaboot-a. Prva pauza se meri u sekundama i u tom vremenu možete \n" -"birati između CD-a, OF starta, MacOS, ili Linux-a.\n" -"\n" -" * Pauza pri startanju kernela: Ova pauza je slična pauzi kod LILO " -"startera.\n" -"Nakon \n" -"izbora Linux-a, imaćete pauzu od 0.1 sekunde pre nego što se selektuje\n" -"default opis kernela.\n" -"\n" -" * Omogući startanje CD-a ?: Ukoliko označite ovu opciju moći ćete da \n" -"izaberete \"C\" za CD pri\n" -"prvom startnom promptu.\n" -"\n" -" * Omogući OF startanje?: Ukoliko označite ovu opciju moći ćete da " -"izaberete \n" -"\"N\" za Open\n" -"Firmware pri prvom startnom promptu.\n" -"\n" -" * Default OS: Možete da izaberete koji operativni sistem će biti pokretan \n" -"kao default kada Open Firmware \n" -"pauza završi." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Wednesday" -msgstr "Sreda" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Germany" -msgstr "Nemačka" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Austria" -msgstr "Austrija" - -#: ../../mouse.pm:1 -#, c-format -msgid "No mouse" -msgstr "Nema miša" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Choose your CD/DVD media size (MB)" -msgstr "Izaberite veličinu vašeg CD/DVD medija (Mb)" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Check permissions of files in the users' home" -msgstr "" -"ukoliko je podešeno na da, proverite ovlašćenja za fajlove u korisničkom " -"home diretorijumu." - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Run \"sndconfig\" after installation to configure your sound card" -msgstr "" -"Pokrenite \"sndconfig\" nakon isntalacije da bi podesili svoju zvučnu karticu" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Collapse Tree" -msgstr "Skupi stablo" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install Configurator" -msgstr "Autoinstalacioni konfigurator" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure networking" -msgstr "Podesi mrežu" - -#: ../../any.pm:1 -#, c-format -msgid "Where do you want to install the bootloader?" -msgstr "Gde biste da instalirate starter?" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Your choice of preferred language will affect the language of the\n" -"documentation, the installer and the system in general. Select first the\n" -"region you are located in, and then the language you speak.\n" -"\n" -"Clicking on the \"%s\" button will allow you to select other languages to\n" -"be installed on your workstation, thereby installing the language-specific\n" -"files for system documentation and applications. For example, if you will\n" -"host users from Spain on your machine, select English as the default\n" -"language in the tree view and \"%s\" in the Advanced section.\n" -"\n" -"Note that you're not limited to choosing a single additional language. You\n" -"may choose several ones, or even install them all by selecting the \"%s\"\n" -"box. Selecting support for a language means translations, fonts, spell\n" -"checkers, etc. for that language will be installed. Additionally, the\n" -"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" -"however that this is an experimental feature. If you select different\n" -"languages requiring different encoding the unicode support will be\n" -"installed anyway.\n" -"\n" -"To switch between the various languages installed on the system, you can\n" -"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" -"language used by the entire system. Running the command as a regular user\n" -"will only change the language settings for that particular user." -msgstr "" -"Vaš izbor jeika će uticati na jezik dokumentacije,\n" -"instalacije i sistema uopšte. Prvo izaberite region u kojem se nalazite,\n" -"a zatim jezik koji govorite.\n" -"\n" -"Klikom na taster \"Napredno\" omogućićete sebi da vidite druge\n" -"jezike koje možete instalirati na vašu radnu stranicu. Biranjem drugih " -"jezika\n" -"ćete instalirati fajlove vezane (za specificirane jezike) za dokumentaciju " -"i\n" -"aplikacije. Na primer, ukoliko će na vašem računaru hostovati korisnici iz " -"Španije\n" -"izaberite Engleski kao glavni a na stablu\n" -"označite i \"Španiski|Španija\".\n" -"\n" -"Zapamtite da možete instalirati više jezika. Kada izaberete sve željene\n" -"dodatne lokalizacije kliknite na taster \"U redu\" da bi nastavili.\n" -"\n" -"Da bi menjali različite jezike koji su instalirani na vašem sistemu, možete " -"pokrenuti\n" -" \"/usr/sbin/localedrake\" komandu kao \"root\" da bi promenili jezik koji " -"se \n" -"koristi u celom sistemu. pokretanjem komande kao regularni korisnik samo " -"ćete promeniti\n" -"postavke jezika za datog korisnika." - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is not supported by this version of Mandrake Linux." -msgstr "%s nije podržan u ovoj verziji Mandrake Linux-a." - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "tape" -msgstr "Traka" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP client" -msgstr "DHCP klijent" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "List users on display managers (kdm and gdm)" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli listu korisnika na sistemu u menadžerima za displej (kdm " -"i gdm)." - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech Mouse (serial, old C7 type)" -msgstr "Logitech mouse (serijski, stari C7 tip)" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Restoring from file %s failed: %s" -msgstr "Otvaranje iz datoteke %s nije uspelo: %s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"I can't read the partition table of device %s, it's too corrupted for me :(\n" -"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" -"The other solution is to not allow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to lose all the partitions?\n" -msgstr "" -"Ne mogu pročitati tabelu particija uređaj %s , mnogo je iskvarena za mene :" -"(\n" -"Pokušaću dalje zaobilazeći loše particijeMogu pokušati da formatiram loše " -"particije (SVI PODACI će biti izgubljeni !).\n" -"Drugo rešenje je da se DrakX onemogući da modufikuje tabelu particija.\n" -"(greška je %s)\n" -"\n" -"Da li se pristajete da izgubite sve particije?\n" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Find Package" -msgstr "%d paketa" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Are you sure that you want to set up printing on this machine?\n" -msgstr "Da li ste sigurni da želite da podesite štampanje na ovoj mašini?\n" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "New devfs device" -msgstr "Novi devfs uređaj" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "ERROR: Cannot spawn %s." -msgstr "GREŠKA: Nije moguće povezivanje %s." - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Boot Style Configuration" -msgstr "Konfiguracija stila startanja" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Automatic time synchronization" -msgstr "Automatska sinhronizacija vremena (preko NTP-a)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files not found at %s." -msgstr "Backup fajlvi nisu pronađeni na %s." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (phonetic)" -msgstr "Jermenski (fonetski)" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Card model:" -msgstr "Model kartice :" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Thin Client" -msgstr "Thin klijent" - -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "Thank you for choosing Mandrake Linux 9.2" -msgstr "Hvala vam što ste izabrali Mandrake Linux 9.2" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Start Server" -msgstr "Pokreni Server" - -#: ../../lang.pm:1 -#, c-format -msgid "Turkmenistan" -msgstr "Turkmenistan" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "All remote machines" -msgstr "Sve udaljene mašine" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Install themes" -msgstr "Instaliraj teme" - -#: ../../help.pm:1 -#, c-format -msgid "Espanol" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing installation" -msgstr "Pripremam instalaciju" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Edit selected host/network" -msgstr "Uredi selektovanog hosta/mrežu" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add User -->" -msgstr "Dodaj Korisnika -->" - -#: ../../lang.pm:1 -#, c-format -msgid "Nauru" -msgstr "Nauru" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type fonts installation" -msgstr "Instalacija True Type fontova" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected directly to the local network" -msgstr "Auto-detekcija štampača povezanih direktno na lokalnu mrežu" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN configuration" -msgstr "LAN konfiguracija" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "hard disk model" -msgstr "model hard diska" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/exports:\n" -" \tClusternfs allows export of the root filesystem to diskless " -"clients. drakTermServ\n" -" \tsets up the correct entry to allow anonymous access to the root " -"filesystem from\n" -" \tdiskless clients.\n" -"\n" -" \tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t/\t\t\t\t\t(ro,all_squash)\n" -" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -" \tWith SUBNET/MASK being defined for your network." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use a LVM Logical Volume for mount point %s" -msgstr "Ne možete koristiti logičku LVM particiju za tačku montiranja %s" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Get Windows Fonts" -msgstr "Dobavi Windows fontove" - -#: ../../mouse.pm:1 -#, c-format -msgid "Mouse Systems" -msgstr "Mouse Systems" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "" -"Your computer can synchronize its clock\n" -" with a remote time server using NTP" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Iranian" -msgstr "Iranski" - -#: ../../lang.pm:1 -#, c-format -msgid "Croatia" -msgstr "Hrvatska" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway:" -msgstr "Gateway:" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add server" -msgstr "Dodaj server" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name" -msgstr "Ime udaljeni štampača" - -#: ../advertising/10-security.pl:1 -#, c-format -msgid "" -"MandrakeSoft has designed exclusive tools to create the most secured Linux " -"version ever: Draksec, a system security management tool, and a strong " -"firewall are teamed up together in order to highly reduce hacking risks." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Device: " -msgstr "Uređaj: " - -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Printerdrake" -msgstr "Printerdrake" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "License agreement" -msgstr "LIcencirani ugovor" - -#: ../../standalone/draksec:1 -#, c-format -msgid "System Options" -msgstr "Sisitemske opcije" - -#: ../../security/level.pm:1 -#, c-format -msgid "Please choose the desired security level" -msgstr "Izaberite željeni sigurnosni nivo" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "This host is already in the list, it cannot be added again.\n" -msgstr "Ovaj host već postoji na listi, i ne može se ponovo dodati.\n" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", USB printer" -msgstr ", USB štampač" - -#: ../../standalone/drakfloppy:1 -#, fuzzy, c-format -msgid "" -"Unable to properly close mkbootdisk:\n" -"\n" -"<span foreground=\"Red\"><tt>%s</tt></span>" -msgstr "" -"Ne mogu korektno da zatvorim mkbootdisk: \n" -" %s \n" -" %s" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Incremental backups only save files that have changed or are new since the " -"last backup." -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Choose the applications that will support the fonts:" -msgstr "Izaberite aplikacije koje će podržavati fontove :" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure X" -msgstr "Konfigurisanje X-a" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "hd" -msgstr "Čad" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (traditional \"F\" model)" -msgstr "Turski (tradicionalni \"F\" model)" - -#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Congratulations!" -msgstr "Čestitamo !" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use owner id for execution" -msgstr "Koristi id vlasnika za izvršavanje" - -#: ../../security/l10n.pm:1 -#, fuzzy, c-format -msgid "Allow remote root login" -msgstr "" -"Argumenti: (arg)\n" -"\n" -"Dozvoli/Ne dozvoli udaljeno root logovanje." - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Down" -msgstr "Dole" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer (No driver)" -msgstr "Raw štampač (bez drajvera)" - -#: ../../network/modem.pm:1 -#, c-format -msgid "Install rpm" -msgstr "Instaliraj rpm" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) you can either use " -"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " -"\"kprinter <file>\". The graphical tools allow you to choose the printer and " -"to modify the option settings easily.\n" -msgstr "" -"Da bi štampali fajl iz komandne linije (ili prozora terminala) možete ili " -"koristiti komandu \"%s <fajl>\" ili prafički alat za štampanje: \"xpp <fajl>" -"\" ili \"kprinter <fajl>\". Grafički alati vam dozovoljavaju da izaberete " -"štampač i izmenite opcije veoma lako.\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Time remaining " -msgstr "Preostalo vreme" - -#: ../../keyboard.pm:1 -#, c-format -msgid "UK keyboard" -msgstr "UK tastatura" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Unmount" -msgstr "Demontiraj" - -#: ../../mouse.pm:1 -#, c-format -msgid "Microsoft Explorer" -msgstr "Microsoft Explorer" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Uninstall Fonts" -msgstr "Deinstaliraj fontove" - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Please wait, detecting and configuring devices..." -msgstr "Samo momenat, podešavam nivo sigurnosti..." - -#: ../../keyboard.pm:1 -#, c-format -msgid "German (no dead keys)" -msgstr "Nemački (bez mrtvih tastera)" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\tSend mail to %s\n" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transferring %s..." -msgstr "Transferišem %s ..." - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "32 thousand colors (15 bits)" -msgstr "32 hiljade boja (15-bitna paleta)" - -#: ../../any.pm:1 -#, c-format -msgid "" -"You can export using NFS or Samba. Please select which you'd like to use." -msgstr "Možete eksportovati koristeći NFS ili Samba-u. Koji od ova dva želite" - -#: ../../lang.pm:1 -#, c-format -msgid "Gambia" -msgstr "Gambija" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Control Center" -msgstr "Mandrake Kontrolni Centar" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#: ../../../move/move.pm:1 -#, c-format -msgid "Reboot" -msgstr "Restart" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device" -msgstr ", multi-funkcionalni uređaj" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"You can enter miscellaneous ports. \n" -"Valid examples are: 139/tcp 139/udp.\n" -"Have a look at /etc/services for information." -msgstr "" -"Možete uneti različite portove. \n" -"Ispravni primeri su: 139/tcp 139/udp.\n" -"Pogledajte /etc/services za informaciju." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Tape \n" -msgstr "\t-Traka \n" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -"No browser is installed on your system, Please install one if you want to " -"browse the help system" -msgstr "" -"Nijedan pretraživač nije instaliran. Molim Vas da instalirate jedan da bi " -"mogli da koristite sitem dza pomoć" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remember this password" -msgstr "Zapamti ovu lozinku" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "due to unsatisfied %s" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now enabled." -msgstr "Deljenje internet konekcije je omogućeno." - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by SSH.\n" -msgstr "\t-Mreža preko SSH.\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -" If the desired printer was auto-detected, simply choose it from the list " -"and then add user name, password, and/or workgroup if needed." -msgstr "" -"Ukoliko je željeni štampač auto-detektovan, jednostavno ga izaberite sa " -"liste a zatim dodajte korisničko ime, lozinku, i/ili radnu grupu ukoliko je " -"potrebno." - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid " cable" -msgstr "Tabela" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use the free space on the Windows partition" -msgstr "Korisiti slobodan prostor na Windows particiji" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "%s found on %s, configure it automatically?" -msgstr "%s pronađen na %s, da li da ga podesim automatski?" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree86 driver: %s\n" -msgstr "XFree86 drajver: %s\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "This host/network is already in the list, it cannot be added again.\n" -msgstr "Ovaj host/mreža već postoji na listi, i ne može se ponovo dodati.\n" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the packages you want to install" -msgstr "Izaberi pakete za instalaciju" - -#: ../../lang.pm:1 -#, c-format -msgid "Papua New Guinea" -msgstr "Papua Nova Gvineja" - -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Multi-function device on a parallel port" -msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s" - -#: ../../../move/tree/mdk_totem:1 -#, fuzzy, c-format -msgid "Busy files" -msgstr "Backup-uj sistemske fajlove" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Serbian (cyrillic)" -msgstr "Srpski (ćirilica)" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Enter the directory where backups are stored" -msgstr "Unesite direktorijum gde je smešten backup" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Make kernel message quiet by default" -msgstr "Podesite sa poruka kernela bude skrivena po osnovnoj postavci" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to set this printer (\"%s\")\n" -"as the default printer?" -msgstr "" -"Da li želite da podesite ovaj štampač (\"%s\")\n" -"kao default štampač?" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP end range" -msgstr "DHCP kraj raspona" - -#: ../../any.pm:1 -#, c-format -msgid "Creating bootdisk..." -msgstr "Kreiram startni disk..." - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Wait please, testing your connection..." -msgstr "Molim Vas sačekajte, testiram vašu konekciju..." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing down the network" -msgstr "Odstupam od mreže" - -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Login ID" -msgstr "ID za logovanje" - -#: ../../services.pm:1 -#, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP\n" -"networks. This service provides NFS file locking functionality." -msgstr "" -"NFS je popularni protokol za razmenu fajlova preko TCP/IP mreža.\n" -"Ovaj servis omogućava funkcionalnost NFS file locking funkcije" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP Client" -msgstr "DHCP klijent" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "" -"This is HardDrake, a Mandrake hardware configuration tool.\n" -"<span foreground=\"royalblue3\">Version:</span> %s\n" -"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <" -"tvignaud@mandrakesoft.com>\n" -"\n" -msgstr "" -"Ovo je HardDrake, Mandrake-ov alat za podešavanje hardvera.\n" -"Verzija:" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "dismiss" -msgstr "ukloni" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Scanning on \"%s\"" -msgstr "Štampam/Skeniram na \"%s\"" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit raid modules" -msgstr "omit raid moduli" - -#: ../../services.pm:1 -#, c-format -msgid "" -"lpd is the print daemon required for lpr to work properly. It is\n" -"basically a server that arbitrates print jobs to printer(s)." -msgstr "" -"lpd je print demon potreban da bi lpr radio dobro.To je \n" -"u osnovi server koji arbitrira print poslove štampaču(ima)." - -#: ../../keyboard.pm:1 -#, c-format -msgid "Irish" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Sunday" -msgstr "Nedelja" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet Connection Configuration" -msgstr "Konfiguracija Internet Konekcija" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "comma separated numbers" -msgstr "odvojeni brojevi sa zarezom" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"Once you've selected a device, you'll be able to see the device information " -"in fields displayed on the right frame (\"Information\")" -msgstr "" -"Kada jednom izaberete uređaj, moći ćete da vidite objašnjenje na poljima " -"prikazanim u desnom okviru (\"Informacije\")" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Move selected rule up one level" -msgstr "Podigni odabrano pravilo za jedan nivo" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"The following scanner\n" -"\n" -"%s\n" -"is available on your system.\n" -msgstr "" -"Sledeći skener\n" -"\n" -"%s\n" -"je direktno povezan na vaš sistem\n" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you really want to remove the printer \"%s\"?" -msgstr "Da li hoćete da uklonite štampač \"%s\"?" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "I can't find any room for installing" -msgstr "Ne mogu da pronađem slobodan prostor za instaliranje" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Default printer" -msgstr "Default štampač" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"You have configured multiple ways to connect to the Internet.\n" -"Choose the one you want to use.\n" -"\n" -msgstr "" -"Vi ste podesili više načina za konektovanje na Internet.\n" -"Izaberite jedan od njih koji želite da koristite.\n" -"\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Modify RAID" -msgstr "Promeni RAID" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"I have detected an ISDN PCI card, but I don't know its type. Please select a " -"PCI card on the next screen." -msgstr "" -"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI " -"karticu na sledećem ekranu." - -#: ../../any.pm:1 -#, c-format -msgid "Add user" -msgstr "Dodaj korisnika" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "RAID-disks %s\n" -msgstr "RAID-diskovi %s\n" - -#: ../../lang.pm:1 -#, c-format -msgid "Liberia" -msgstr "Liberija" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Could not install the packages needed to set up a scanner with Scannerdrake." -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Please enter the name of the interface connected to the internet.\n" -"\n" -"Examples:\n" -"\t\tppp+ for modem or DSL connections, \n" -"\t\teth0, or eth1 for cable connection, \n" -"\t\tippp+ for a isdn connection.\n" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Choose your keyboard" -msgstr "Izaberi tastaturu" - -#: ../../steps.pm:1 -#, c-format -msgid "Format partitions" -msgstr "Formatiraj particije" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Automatic correction of CUPS configuration" -msgstr "Automatska korekcija CUPS konfiguracije" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Running \"%s\" ..." -msgstr "Pokrećem \"%s\" ..." - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "enable radio support" -msgstr "omogući podršku za radio" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scanner sharing to hosts: " -msgstr "Deljenje skenera za hostove: " - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: %s" -msgstr "Ime Loopback datoteke: %s" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the printer to which the print jobs should go." -msgstr "Izaberite štampač na koji će te upućivati sve dokumente." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not transfer printers" -msgstr "Ne prebacuj štampače" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "Delay before booting the default image" -msgstr "Pauza pre startanja default image-a" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Hard Disk to backup" -msgstr "Koristi Hard Disk za backup" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 -#, c-format -msgid "Configure" -msgstr "Podesi" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scannerdrake" -msgstr "Scannerdrake" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"Warning, another Internet connection has been detected, maybe using your " -"network" -msgstr "" -"Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu " -"mrežu" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Users" -msgstr "Backup-uj Korisnike" - -#: ../../network/network.pm:1 -#, c-format -msgid "" -"Please enter your host name.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''.\n" -"You may also enter the IP address of the gateway if you have one." -msgstr "" -"Molim unesite ime vašeg domena, ime hosta, kao IP adrese dodatnih\n" -"'nameserver'-a. Ime vašeg hosta treba da bude puno kvalifikovano ime hosta,\n" -"kao na pr. ``mybox.mylab.myco.com''.\n" -"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Spooler" -msgstr "Izaberite Spooler za štampač" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Create new theme" -msgstr "Kreiraj novu temu" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mandrake Tools Explanation" -msgstr "Mandrake Alati za objašnjenja" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "No image found" -msgstr "NIje pronađen image" - -#: ../../install_steps.pm:1 -#, c-format -msgid "" -"Some important packages didn't get installed properly.\n" -"Either your cdrom drive or your cdrom is defective.\n" -"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" -"\"\n" -msgstr "" -"Neki važni paketi nisu dobro instalirani.\n" -"Vaš cdrom uređaj ili cd su neispravni.\n" -"Proverite cdrom na instaliranom kompjuteru koristeće \"rpm -qpl Mandrake/" -"RPMS/*.rpm\"\n" - -#: ../advertising/06-development.pl:1 -#, c-format -msgid "Mandrake Linux 9.2: the ultimate development platform" -msgstr "Mandrake Linux 9.2 ultimativna razvojna platforma" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Detected model: %s" -msgstr "Detektovani model: %s" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "\"%s\" is not a valid email!" -msgstr "" - -#: ../../standalone/drakedm:1 -#, c-format -msgid "" -"X11 Display Manager allows you to graphically log\n" -"into your system with the X Window System running and supports running\n" -"several different X sessions on your local machine at the same time." -msgstr "" -"X11 Menadžer za displej vam dozvoljava da se grafički\n" -"prijavite u vaš sistem sa pokrenutim X Window Sistemom i podržava " -"pokretanje\n" -"nekoliko različitih X sesija na lokalnoj mašini u isto vreme." - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run the daily security checks." -msgstr "ukoliko je podešeno na da, pokrenite dnevne sigurnosne provere." - -#: ../../lang.pm:1 -#, c-format -msgid "Azerbaijan" -msgstr "Azerbejdžan" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Device name to use for backup" -msgstr "Unesite ime uređaja koji koristite za backup" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No tape in %s!" -msgstr "Nema trake u %s!" - -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" --doc <link> - link to another web page ( for WM welcome " -"frontend)\n" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (US)" -msgstr "Dvorak (US)" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" -msgstr "ovo je fizički bus na koji je uređaj priključen (npr: PCI, USB, ...)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "How is the printer connected?" -msgstr "Kako je štampač povezan?" - -#: ../../security/level.pm:1 -#, c-format -msgid "Security level" -msgstr "Sigurnosni nivo" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "final resolution" -msgstr "konačna rezolucija" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services" -msgstr "Servisi" - -#: ../../../move/move.pm:1 -#, fuzzy, c-format -msgid "Auto configuration" -msgstr "Custom konfiguracija" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "4 MB" -msgstr "4 MB" - -#: ../../share/compssUsers:999 -msgid "Office Workstation" -msgstr "Radna(Office) stanica" - -#: ../../share/compssUsers:999 -msgid "" -"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " -"gnumeric), pdf viewers, etc" -msgstr "" -"Office programi: tekst procesori (kword, abiword), tabele (kspread, " -"gnumeric), pdf preglednici, itd" - -#: ../../share/compssUsers:999 -msgid "Game station" -msgstr "Stanica za igru" - -#: ../../share/compssUsers:999 -msgid "Amusement programs: arcade, boards, strategy, etc" -msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd" - -#: ../../share/compssUsers:999 -msgid "Multimedia station" -msgstr "Multimedijalna stanica" - -#: ../../share/compssUsers:999 -msgid "Sound and video playing/editing programs" -msgstr "Programi za puštanje zvuka i videa" - -#: ../../share/compssUsers:999 -msgid "Internet station" -msgstr "Internet stanica" - -#: ../../share/compssUsers:999 -#, fuzzy -msgid "" -"Set of tools to read and send mail and news (mutt, tin..) and to browse the " -"Web" -msgstr "" -"Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za " -"pretraživanje Interneta" - -#: ../../share/compssUsers:999 -msgid "Network Computer (client)" -msgstr "Mrežni kompjuter, (klijent)" - -#: ../../share/compssUsers:999 -msgid "Clients for different protocols including ssh" -msgstr "Klijenti za različite protokole uključujući i ssh" - -#: ../../share/compssUsers:999 -msgid "Configuration" -msgstr "Konfiguracija" - -#: ../../share/compssUsers:999 -msgid "Tools to ease the configuration of your computer" -msgstr "Alati za lako konfigurisanje kompjutera" - -#: ../../share/compssUsers:999 -msgid "Scientific Workstation" -msgstr "Naučna radna stanica" - -#: ../../share/compssUsers:999 -msgid "Scientific applications such as gnuplot" -msgstr "Naučne aplikacije kao što je gnuplot" - -#: ../../share/compssUsers:999 -msgid "Console Tools" -msgstr "Konzolni alati" - -#: ../../share/compssUsers:999 -msgid "Editors, shells, file tools, terminals" -msgstr "editori,šelovi, alati za datoteke, terminali" - -#: ../../share/compssUsers:999 -msgid "KDE Workstation" -msgstr "KDE padna stanica" - -#: ../../share/compssUsers:999 -msgid "" -"The K Desktop Environment, the basic graphical environment with a collection " -"of accompanying tools" -msgstr "" -"K Desktop okruženje, osnovno grafičko okruženje sa kolekcijom pratećih alata" - -#: ../../share/compssUsers:999 -msgid "Gnome Workstation" -msgstr "Gnome radna stanica" - -#: ../../share/compssUsers:999 -msgid "" -"A graphical environment with user-friendly set of applications and desktop " -"tools" -msgstr "" -"Grafička okruženja za setom korisničkNFS server, SMB server, Proxy serverNFS " -"server, SMB server, Proxy serverih aplikacija i desktopalata" - -#: ../../share/compssUsers:999 -msgid "Other Graphical Desktops" -msgstr "Drugi grafički desktopovi" - -#: ../../share/compssUsers:999 -msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" -msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd" - -#: ../../share/compssUsers:999 -msgid "C and C++ development libraries, programs and include files" -msgstr "C i C++ razvojne biblioteke, programi i propratne datoteke" - -#: ../../share/compssUsers:999 -msgid "Documentation" -msgstr "Dokumentacija" - -#: ../../share/compssUsers:999 -msgid "Books and Howto's on Linux and Free Software" -msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver" - -#: ../../share/compssUsers:999 -msgid "LSB" -msgstr "LSB" - -#: ../../share/compssUsers:999 -msgid "Linux Standard Base. Third party applications support" -msgstr "Linux-ova Standardna Baza. Podrška za Third party aplikaicje" - -#: ../../share/compssUsers:999 -msgid "Web/FTP" -msgstr "Server, Web/FTP" - -#: ../../share/compssUsers:999 -msgid "Apache, Pro-ftpd" -msgstr "Apache, Pro-ftpd" - -#: ../../share/compssUsers:999 -msgid "Mail" -msgstr "Pošta" - -#: ../../share/compssUsers:999 -msgid "Postfix mail server" -msgstr "Postfix mail server" - -#: ../../share/compssUsers:999 -msgid "Database" -msgstr "Server,Baze podataka" - -#: ../../share/compssUsers:999 -msgid "PostgreSQL or MySQL database server" -msgstr "PostgreSQL ili MySQL server za bazu podataka" - -#: ../../share/compssUsers:999 -msgid "Firewall/Router" -msgstr "Server, Firewall/Router" - -#: ../../share/compssUsers:999 -msgid "Internet gateway" -msgstr "Internet gateway" - -#: ../../share/compssUsers:999 -msgid "DNS/NIS " -msgstr "DNS/NIS " - -#: ../../share/compssUsers:999 -msgid "Domain Name and Network Information Server" -msgstr "Ime Domena i Mrežni Informacioni Server" - -#: ../../share/compssUsers:999 -msgid "Network Computer server" -msgstr "Mrežni Server" - -#: ../../share/compssUsers:999 -msgid "NFS server, SMB server, Proxy server, ssh server" -msgstr "NFS server, SMB server, Proxy server, SSH server" - -#: ../../share/compssUsers:999 -#, fuzzy -msgid "Set of tools to read and send mail and news and to browse the Web" -msgstr "" -"Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za " -"pretraživanje Interneta" - -#~ msgid "The setup has already been done, and it's currently enabled." -#~ msgstr "" -#~ "Podešavanje deljenja internet konekcije je već završeno i trenutno je " -#~ "omogućeno." - -#~ msgid "Logs" -#~ msgstr "Logovi" - -#~ msgid "The setup has already been done, but it's currently disabled." -#~ msgstr "" -#~ "Podešavanje deljenja internet konekcije je već završeno ali je trenutno " -#~ "onemogućeno." - -#~ msgid "Profile " -#~ msgstr "Profil " - -#~ msgid "" -#~ "Welcome to the Internet Connection Sharing utility!\n" -#~ "\n" -#~ "%s\n" -#~ "\n" -#~ "Click on Configure to launch the setup wizard." -#~ msgstr "" -#~ "Dobrodošli u alat za podešavanje Deljenja Internet konekcije\n" -#~ "%s\n" -#~ "\n" -#~ "Kliknite na Podesi (Configure) da bi pokrenuli podešavanje." - -#~ msgid "Internet Connection Sharing configuration" -#~ msgstr "Konfiguracija Deljenja Internet konekcije" - -#~ msgid "No Internet Connection Sharing has ever been configured." -#~ msgstr "Do sada Deljenje internet konekcije nije podešavano." - -#~ msgid "when checked, owner and group won't be changed" -#~ msgstr "kada je selektovana, vlasnik i grupa ne mogu biti promenjeni" - -#~ msgid "" -#~ "XawTV isn't installed!\n" -#~ "\n" -#~ "\n" -#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor " -#~ "saa7134\n" -#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n" -#~ "results of \"lspcidrake -v -f\" to \"install@mandrakesoft.com\"\n" -#~ "with subject \"undetected TV card\".\n" -#~ "\n" -#~ "\n" -#~ "You can install it by typing \"urpmi xawtv\" as root, in a console." -#~ msgstr "" -#~ "XawTV nije instaliran!\n" -#~ "\n" -#~ "\n" -#~ "Ukoliko imate TV karticu ali je DrakX nije detektovao (bez bttv ili\n" -#~ "saa7134 modula u \"/etc/modules\") niti je instalirao xawtv, molim vas da " -#~ "pošaljete\n" -#~ "rezultate od \"lspcidrake -v -f\" na \"install@mandrakesoft.com\"\n" -#~ "sa subjektom \"undetected TV card\".\n" -#~ "\n" -#~ "\n" -#~ "Nožete ga instalirati ukucavanjem \"urpmi xawtv\" kao root, u konzoli." - -#~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" -#~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" - -#~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" - -#, fuzzy -#~ msgid "Hostname configuration" -#~ msgstr "Konfiguracija sistema" - -#, fuzzy -#~ msgid "Hostname" -#~ msgstr "Ime hosta:" - -#~ msgid "Remote Printers" -#~ msgstr "Udaljeni štampači" - -#~ msgid "Printing system: " -#~ msgstr "Sistem za štampanje: " - -#, fuzzy -#~ msgid "Level 1" -#~ msgstr "Nivo" - -#, fuzzy -#~ msgid "Level 2" -#~ msgstr "Nivo" - -#, fuzzy -#~ msgid "Level 3" -#~ msgstr "Nivo" - -#, fuzzy -#~ msgid "Level 4" -#~ msgstr "Nivo" - -#, fuzzy -#~ msgid "Level 5" -#~ msgstr "Nivo" - -#, fuzzy -#~ msgid "Insert floppy and press %s" -#~ msgstr "Ubacite disketu u uređaj %s" - -#~ msgid "Load" -#~ msgstr "Učitaj" - -#, fuzzy -#~ msgid "Bad Ip" -#~ msgstr " IO kartice" - -#~ msgid "Output" -#~ msgstr "Output" - -#~ msgid "Please relog into %s to activate the changes" -#~ msgstr "Molim, ponovo unesite %s radi aktiviranja promena" |