summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/no.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/no.po')
-rw-r--r--perl-install/share/po/no.po468
1 files changed, 354 insertions, 114 deletions
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index 80f026b81..b393e6247 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: panoramix VERSION\n"
-"POT-Creation-Date: 1999-09-28 22:20+0200\n"
+"POT-Creation-Date: 1999-09-30 01:32+0200\n"
"PO-Revision-Date: 1999-08-25 11:07+0200\n"
"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
"Language-Team: norwegian\n"
@@ -29,6 +29,19 @@ msgstr "Velg minnestørrelsen til grafikk-kortet ditt"
msgid "Choose a monitor"
msgstr "Velg en monitor"
+#: ../Xconfigurator.pm_.c:202
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor. If in doubt, choose a\n"
+"conservative setting."
+msgstr ""
+
#: ../Xconfigurator.pm_.c:209
msgid "Horizontal refresh rate"
msgstr "Horisontal oppfrisknings-rate"
@@ -86,6 +99,13 @@ msgstr "En feil oppsto, prøv å endre noen parametere"
msgid "Automatic resolutions"
msgstr "Automatiske oppløsninger"
+#: ../Xconfigurator.pm_.c:335
+msgid ""
+"To find the available resolutions i will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+
#: ../Xconfigurator.pm_.c:382 ../install_steps_interactive.pm_.c:404
#: ../install_steps_interactive.pm_.c:405
msgid "Resolution"
@@ -95,91 +115,121 @@ msgstr "Oppløsning"
msgid "Choose resolution and color depth"
msgstr "Velg oppløsning og fargedybde"
-#: ../Xconfigurator.pm_.c:675
+#: ../Xconfigurator.pm_.c:484
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Alas it can freeze sometimes\n"
+"Do you want to try?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:489
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:673
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-oppsett: %s\n"
-#: ../Xconfigurator.pm_.c:676
+#: ../Xconfigurator.pm_.c:674
#, c-format
msgid "Mouse type: %s\n"
msgstr "Type mus: %s\n"
-#: ../Xconfigurator.pm_.c:677
+#: ../Xconfigurator.pm_.c:675
#, c-format
msgid "Mouse device: %s\n"
msgstr "Enhet mus: %s\n"
-#: ../Xconfigurator.pm_.c:678
+#: ../Xconfigurator.pm_.c:676
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"
-#: ../Xconfigurator.pm_.c:679
+#: ../Xconfigurator.pm_.c:677
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HorizSync: %s\n"
-#: ../Xconfigurator.pm_.c:680
+#: ../Xconfigurator.pm_.c:678
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertRefresh: %s\n"
-#: ../Xconfigurator.pm_.c:681
+#: ../Xconfigurator.pm_.c:679
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafikk-kort: %s\n"
-#: ../Xconfigurator.pm_.c:682
+#: ../Xconfigurator.pm_.c:680
#, c-format
msgid "Graphic memory: %s KB\n"
msgstr "Minne grafikk: %s KB\n"
-#: ../Xconfigurator.pm_.c:683
+#: ../Xconfigurator.pm_.c:681
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86-tjener: %s\n"
-#: ../Xconfigurator.pm_.c:708
+#: ../Xconfigurator.pm_.c:706
msgid "Change Monitor"
msgstr "Endre monitor"
-#: ../Xconfigurator.pm_.c:709
+#: ../Xconfigurator.pm_.c:707
msgid "Change Graphic card"
msgstr "Endre grafikk-kort"
-#: ../Xconfigurator.pm_.c:710
+#: ../Xconfigurator.pm_.c:708
msgid "Change Resolution"
msgstr "Endre oppløsning"
-#: ../Xconfigurator.pm_.c:711
+#: ../Xconfigurator.pm_.c:709
msgid "Automatical resolutions search"
msgstr "Automatisk oppløsningssøk"
-#: ../Xconfigurator.pm_.c:715
+#: ../Xconfigurator.pm_.c:713
msgid "Show information"
msgstr "Vis informasjon"
-#: ../Xconfigurator.pm_.c:716
+#: ../Xconfigurator.pm_.c:714
msgid "Test again"
msgstr "Test igjen"
-#: ../Xconfigurator.pm_.c:717
+#: ../Xconfigurator.pm_.c:715
msgid "Quit"
msgstr "Slutt"
-#: ../Xconfigurator.pm_.c:720
+#: ../Xconfigurator.pm_.c:718
msgid "What do you want to do?"
msgstr "Hva vil du gjøre?"
-#: ../Xconfigurator.pm_.c:725
+#: ../Xconfigurator.pm_.c:723
msgid "X at startup"
msgstr "X ved oppstart"
-#: ../Xconfigurator.pm_.c:731
+#: ../Xconfigurator.pm_.c:724
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:729
msgid "X successfully configured"
msgstr "Konfigurasjon av X vellykket"
+#: ../Xconfigurator.pm_.c:730
+msgid ""
+"Configuration file has been written. Take a look at it before running "
+"'startx'.\n"
+"Within the server press ctrl, alt and '+' simultaneously to cycle video "
+"resolutions.\n"
+"Pressing ctrl, alt and backspace simultaneously immediately exits the "
+"server\n"
+"For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config."
+msgstr ""
+
#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors"
msgstr "256 farger"
@@ -532,6 +582,11 @@ msgstr "Angre"
msgid "Write partition table"
msgstr "Skriv partisjonstabell"
+#: ../diskdrake.pm_.c:96
+#, fuzzy
+msgid "Details"
+msgstr "Dansk"
+
#: ../diskdrake.pm_.c:118
#, c-format
msgid "After %s partition %s,"
@@ -545,7 +600,7 @@ msgstr "Les nøye!"
msgid "all data on this partition will be lost"
msgstr "alle data på denne partisjonen vil gå tapt"
-#: ../diskdrake.pm_.c:136 ../install2.pm_.c:315 ../install2.pm_.c:348
+#: ../diskdrake.pm_.c:136 ../install2.pm_.c:316 ../install2.pm_.c:351
#: ../install_steps.pm_.c:66 ../install_steps_interactive.pm_.c:36
msgid "Error"
msgstr "Feil"
@@ -629,6 +684,27 @@ msgstr "Monter"
msgid "Active"
msgstr "Aktiv"
+#: ../diskdrake.pm_.c:287
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use lilo and it won't work, or you don't use a lilo and you don't "
+"need /boot"
+msgstr ""
+
+#: ../diskdrake.pm_.c:291
+#, fuzzy
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the lilo boot manager, be careful to add a /boot partition"
+msgstr ""
+"Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
+"sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
+"bruke lilo (oppstartshåndtereren),\n"
+"vær nøye med å legge til en /boot partisjon"
+
#: ../diskdrake.pm_.c:305
msgid "Leave without saving"
msgstr "Avslutt uten å lagre"
@@ -649,6 +725,11 @@ msgstr "Endre partisjonstype"
msgid "Which partition type do you want?"
msgstr "Hvilken partisjonstype ønsker du?"
+#: ../diskdrake.pm_.c:337
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Hvor vil du montere %s enheten?"
+
#: ../diskdrake.pm_.c:338
msgid "Mount point"
msgstr "Monteringspunkt"
@@ -698,7 +779,7 @@ msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
msgid "Computing fat filesystem bounds"
msgstr "Beregner fat filsystemgrense"
-#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:457 ../interactive_gtk.pm_.c:207
+#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:457
msgid "Resizing"
msgstr "Endrer størrelse"
@@ -710,7 +791,7 @@ msgstr "endrer størrelse"
msgid "Choose the new size"
msgstr "Velg ny størrelse"
-#: ../diskdrake.pm_.c:436 ../install_steps_graphical.pm_.c:269
+#: ../diskdrake.pm_.c:436 ../install_steps_graphical.pm_.c:270
msgid "MB"
msgstr "MB"
@@ -738,10 +819,23 @@ msgstr "Valg: "
msgid "Select file"
msgstr "Velg fil"
+#: ../diskdrake.pm_.c:558
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+
#: ../diskdrake.pm_.c:566
msgid "Warning"
msgstr "Advarsel"
+#: ../diskdrake.pm_.c:567
+#, fuzzy
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr "alle data på denne partisjonen vil gå tapt"
+
#: ../diskdrake.pm_.c:581
msgid "Searching for your lost partition table"
msgstr "Søker etter din tapte partisjonstabell"
@@ -949,7 +1043,7 @@ msgstr ""
#: ../help.pm_.c:88 ../help.pm_.c:91 ../help.pm_.c:94 ../help.pm_.c:97
#: ../help.pm_.c:100 ../help.pm_.c:135 ../help.pm_.c:151 ../help.pm_.c:238
#: ../help.pm_.c:241 ../help.pm_.c:244 ../help.pm_.c:247 ../help.pm_.c:250
-#: ../help.pm_.c:285 ../help.pm_.c:301 ../install2.pm_.c:64
+#: ../help.pm_.c:285 ../help.pm_.c:301 ../install2.pm_.c:65
msgid "Help"
msgstr "Hjelp"
@@ -1044,119 +1138,125 @@ msgstr ""
"Deretter kan du teste konfigurasjonen og endre dine valg hvis det er\n"
"nødvendig."
-#: ../install2.pm_.c:38
+#: ../install2.pm_.c:39
msgid "Choose your language"
msgstr "Velg språk"
-#: ../install2.pm_.c:39
+#: ../install2.pm_.c:40
msgid "Select installation class"
msgstr "Velg installasjonsklasse"
-#: ../install2.pm_.c:40
+#: ../install2.pm_.c:41
msgid "Setup SCSI"
msgstr "Oppsett SCSI"
-#: ../install2.pm_.c:41
+#: ../install2.pm_.c:42
msgid "Choose install or upgrade"
msgstr "Velg installering eller oppgradering"
-#: ../install2.pm_.c:42
+#: ../install2.pm_.c:43
msgid "Configure mouse"
msgstr "Konfigurer mus"
-#: ../install2.pm_.c:43
+#: ../install2.pm_.c:44
msgid "Choose your keyboard"
msgstr "Velg tastatur"
-#: ../install2.pm_.c:44
+#: ../install2.pm_.c:45
msgid "Setup filesystems"
msgstr "Oppsett filsystemer"
-#: ../install2.pm_.c:45
+#: ../install2.pm_.c:46
msgid "Format partitions"
msgstr "Formater partisjoner"
-#: ../install2.pm_.c:46
+#: ../install2.pm_.c:47
msgid "Choose packages to install"
msgstr "Velg pakker for installering"
-#: ../install2.pm_.c:47
+#: ../install2.pm_.c:48
msgid "Install system"
msgstr "Installer systemet"
-#: ../install2.pm_.c:48
+#: ../install2.pm_.c:49
msgid "Configure networking"
msgstr "Konfigurer nettverk"
-#: ../install2.pm_.c:49
+#: ../install2.pm_.c:50
msgid "Configure timezone"
msgstr "Konfigurer tidssone"
-#: ../install2.pm_.c:51
+#: ../install2.pm_.c:52
msgid "Configure printer"
msgstr "Konfigurer skriver"
-#: ../install2.pm_.c:52 ../install_steps_interactive.pm_.c:462
+#: ../install2.pm_.c:53 ../install_steps_interactive.pm_.c:462
#: ../install_steps_interactive.pm_.c:463
msgid "Set root password"
msgstr "Sett root-passord"
-#: ../install2.pm_.c:53
+#: ../install2.pm_.c:54
msgid "Add a user"
msgstr "Legg til en bruker"
-#: ../install2.pm_.c:54
+#: ../install2.pm_.c:55
msgid "Create bootdisk"
msgstr "Opprett oppstartdiskett"
-#: ../install2.pm_.c:55
+#: ../install2.pm_.c:56
msgid "Install bootloader"
msgstr "Installer oppstartslaster"
-#: ../install2.pm_.c:56
+#: ../install2.pm_.c:57
msgid "Configure X"
msgstr "Konfigurer X"
-#: ../install2.pm_.c:57
+#: ../install2.pm_.c:58
msgid "Exit install"
msgstr "Gå ut av installering"
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
msgid "beginner"
msgstr "nybegynner"
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
msgid "developer"
msgstr "utvikler"
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
msgid "expert"
msgstr "ekspert"
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
msgid "server"
msgstr "tjener"
-#: ../install2.pm_.c:268
+#: ../install2.pm_.c:269
msgid " : This is not a root partition, try again."
msgstr ""
-#: ../install2.pm_.c:268 ../install2.pm_.c:294
+#: ../install2.pm_.c:269 ../install2.pm_.c:295
#, fuzzy
msgid "Information"
msgstr "formatering"
-#: ../install2.pm_.c:294
+#: ../install2.pm_.c:295
#, fuzzy
msgid "Found root partition : "
msgstr "Formater partisjoner"
-#: ../install2.pm_.c:315
+#: ../install2.pm_.c:316
#, fuzzy
msgid "No root partition found"
msgstr "Formater partisjoner"
-#: ../install2.pm_.c:360
+#: ../install2.pm_.c:352
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+
+#: ../install2.pm_.c:363
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
@@ -1164,82 +1264,99 @@ msgstr ""
"En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
"filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
-#: ../install2.pm_.c:381
+#: ../install2.pm_.c:384
msgid "partitioning failed: no root filesystem"
msgstr "partisjonering feilet: intet root-filsystem"
-#: ../install2.pm_.c:543
+#: ../install2.pm_.c:546
msgid "Error reading file $f"
msgstr "Feil ved lesing av fil $f"
-#: ../install2.pm_.c:548
+#: ../install2.pm_.c:551
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr "Dårlig kickstart-fil %s (mislykket %s)"
+#: ../install_steps.pm_.c:67
+msgid ""
+"An error occurred, i don't know how to handle it nicely,\n"
+"so continue at your own risk :("
+msgstr ""
+
#: ../install_steps.pm_.c:273
msgid "no floppy available"
msgstr "ingen diskett tilgjengelig"
-#: ../install_steps_graphical.pm_.c:269
+#: ../install_steps_graphical.pm_.c:270
msgid "Total size: "
msgstr "Total størrelse: "
-#: ../install_steps_graphical.pm_.c:288
-msgid "Hide"
-msgstr "Gjem"
-
-#: ../install_steps_graphical.pm_.c:288
-msgid "Show All"
-msgstr "Vis alle"
-
-#: ../install_steps_graphical.pm_.c:292
-msgid "Select All"
-msgstr "Velg alle"
-
-#: ../install_steps_graphical.pm_.c:292
-msgid "Unselect All"
-msgstr "Fjern alle valg"
-
-#: ../install_steps_graphical.pm_.c:359
+#: ../install_steps_graphical.pm_.c:367
msgid "Choose the packages you want to install"
msgstr "Velg pakkene du ønsker å installere"
-#: ../install_steps_graphical.pm_.c:371
+#: ../install_steps_graphical.pm_.c:379
msgid "Info"
msgstr "Info"
-#: ../install_steps_graphical.pm_.c:397
+#: ../install_steps_graphical.pm_.c:384
+msgid "Go"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:385
+#, fuzzy
+msgid "Select less"
+msgstr "Velg fil"
+
+#: ../install_steps_graphical.pm_.c:386
+#, fuzzy
+msgid "Select more"
+msgstr "Velg fil"
+
+#: ../install_steps_graphical.pm_.c:387
+#, fuzzy
+msgid "Show less"
+msgstr "Vis alle"
+
+#: ../install_steps_graphical.pm_.c:388
+msgid "Show more"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:406
msgid "Installing"
msgstr "Installerer"
-#: ../install_steps_graphical.pm_.c:403
+#: ../install_steps_graphical.pm_.c:412
msgid "Please wait, "
msgstr "Vennligst vent, "
-#: ../install_steps_graphical.pm_.c:405
+#: ../install_steps_graphical.pm_.c:414
msgid "Time remaining "
msgstr "Tid som gjenstår "
-#: ../install_steps_graphical.pm_.c:406
+#: ../install_steps_graphical.pm_.c:415
msgid "Total time "
msgstr "Total tid "
-#: ../install_steps_graphical.pm_.c:411
+#: ../install_steps_graphical.pm_.c:420
msgid "preparing installation"
msgstr "forbereder installasjon"
-#: ../install_steps_graphical.pm_.c:432
+#: ../install_steps_graphical.pm_.c:441
#, c-format
msgid "installing package %s"
msgstr "installerer pakke %s"
-#: ../install_steps_graphical.pm_.c:457
+#: ../install_steps_graphical.pm_.c:466
msgid "Go on anyway?"
msgstr ""
-#: ../install_steps_graphical.pm_.c:549 ../interactive.pm_.c:47
-#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:194 ../my_gtk.pm_.c:346
+#: ../install_steps_graphical.pm_.c:466
+msgid "There was an error ordering packages:"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:558 ../interactive.pm_.c:47
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:346
#: ../my_gtk.pm_.c:430
msgid "Ok"
msgstr "Ok"
@@ -1545,6 +1662,7 @@ msgstr "Du kan nå konfigurere fargeopsjonene for denne skriveren."
#: ../install_steps_interactive.pm_.c:464
#: ../install_steps_interactive.pm_.c:489
+#: ../install_steps_interactive.pm_.c:572
msgid "Password"
msgstr "Passord"
@@ -1661,14 +1779,40 @@ msgstr "Hvor vil du installere oppstartslasteren?"
msgid "Do you want to use lilo?"
msgstr "Ønsker du å bruke lilo?"
+#: ../install_steps_interactive.pm_.c:567
+msgid "Boot device"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:568
+msgid "Linear (needed for some SCSI drives)"
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:568
msgid "linear"
msgstr "lineær"
#: ../install_steps_interactive.pm_.c:569
+#, fuzzy
+msgid "Compact"
+msgstr "kompakt"
+
+#: ../install_steps_interactive.pm_.c:569
msgid "compact"
msgstr "kompakt"
+#: ../install_steps_interactive.pm_.c:570
+msgid "Delay before choosing default choice"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:571
+msgid "Video mode"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:573
+#, fuzzy
+msgid "Restrict command line options"
+msgstr "Lilo hovedopsjoner"
+
#: ../install_steps_interactive.pm_.c:573
msgid "restrict"
msgstr "begrense"
@@ -1683,19 +1827,99 @@ msgid ""
msgstr ""
"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"
+#: ../install_steps_interactive.pm_.c:592
+msgid ""
+"Here are the following entries in lilo\n"
+"You can add some more or change the existent ones."
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:594
msgid "Add"
msgstr "Legg til"
+#: ../install_steps_interactive.pm_.c:611
+msgid "Image"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:612
+#: ../install_steps_interactive.pm_.c:620
+msgid "Root"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:613
+msgid "Append"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:614
+msgid "Initrd"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:615
+msgid "Read-write"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:621
+msgid "Table"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:622
+msgid "Unsafe"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:627
+msgid "Label"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:629
+#, fuzzy
+msgid "Default"
+msgstr "Slett"
+
#: ../install_steps_interactive.pm_.c:646
msgid "Lilo failed. The following error occured:"
msgstr ""
+#: ../install_steps_interactive.pm_.c:657
+msgid ""
+"Some steps are not completed\n"
+"Do you really want to quit now?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:661
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"For information on fixes which are available for this release of Linux "
+"Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux Mandrake User's Guide."
+msgstr ""
+"Gratulerer, installasjonen er fullført.\n"
+"Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
+"For informasjon om fiks som er tilgjengelig for denne utgaven av Linux "
+"Mandrake,\n"
+"sjekk Errataen tilgjengelig fra http://www.linux-mandrake.com/.\n"
+"Informasjon om konfigurering av systemet ditt finnes i post\n"
+"install-kapittelet i Official Linux Mandrake User's Guide."
+
#: ../install_steps_interactive.pm_.c:678
#, c-format
msgid "What %s card have you?"
msgstr "Hvilket %s kort har du?"
+#: ../install_steps_interactive.pm_.c:685
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:690
msgid "Autoprobe"
msgstr "Automatisk sondering"
@@ -1704,10 +1928,30 @@ msgstr "Automatisk sondering"
msgid "Specify options"
msgstr "Spesifiser opsjoner"
+#: ../install_steps_interactive.pm_.c:694
+#, c-format
+msgid "Here must give the different options for the module %s."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:700
+#, c-format
+msgid ""
+"Here must give the different options for the module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For example you can have ``io=0x300 irq=7''"
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:703
msgid "Module options:"
msgstr "Modulopsjoner:"
+#: ../install_steps_interactive.pm_.c:710
+#, c-format
+msgid ""
+"Loading of module %s failed\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:723
#, c-format
msgid "Installing driver for %s card %s"
@@ -1718,6 +1962,11 @@ msgstr "Installerer driver for %s kort %s"
msgid "(module %s)"
msgstr "(modul %s)"
+#: ../install_steps_interactive.pm_.c:732
+#, c-format
+msgid "Skip %s pci probe"
+msgstr ""
+
#: ../install_steps_interactive.pm_.c:736
#, c-format
msgid "Found %s %s interfaces"
@@ -1751,7 +2000,7 @@ msgstr "Se maskinvareinfo"
msgid "Starting step `%s'\n"
msgstr "Starter steg `%s'\n"
-#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:195 ../my_gtk.pm_.c:346
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:346
msgid "Cancel"
msgstr "Avbryt"
@@ -1913,6 +2162,12 @@ msgstr "US-tastatur"
msgid "Yugoslavian (latin layout)"
msgstr "Jugoslavisk (latinsk oppsett)"
+#: ../lilo.pm_.c:100
+msgid ""
+"Welcome to lilo the operating system chooser!\n"
+"To know the different choices, press <TAB>\n"
+msgstr ""
+
#: ../mouse.pm_.c:15
msgid "No Mouse"
msgstr "Ingen mus"
@@ -2033,6 +2288,13 @@ msgstr "Logitech Bus Mouse"
msgid "Is it ok?"
msgstr "Er det ok?"
+#: ../partition_table.pm_.c:372
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+
#: ../partition_table.pm_.c:458
#, c-format
msgid "Error reading file %s"
@@ -2052,22 +2314,14 @@ msgstr "Dårlig sikkerhetskopi-fil"
msgid "Error writing to file %s"
msgstr "Feil ved skriving til fil %s"
-#~ msgid ""
-#~ "Congratulations, installation is complete.\n"
-#~ "Remove the boot media and press return to reboot.\n"
-#~ "For information on fixes which are available for this release of Linux "
-#~ "Mandrake,\n"
-#~ "consult the Errata available from http://www.linux-mandrake.com/.\n"
-#~ "Information on configuring your system is available in the post\n"
-#~ "install chapter of the Official Linux Mandrake User's Guide."
-#~ msgstr ""
-#~ "Gratulerer, installasjonen er fullført.\n"
-#~ "Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
-#~ "For informasjon om fiks som er tilgjengelig for denne utgaven av Linux "
-#~ "Mandrake,\n"
-#~ "sjekk Errataen tilgjengelig fra http://www.linux-mandrake.com/.\n"
-#~ "Informasjon om konfigurering av systemet ditt finnes i post\n"
-#~ "install-kapittelet i Official Linux Mandrake User's Guide."
+#~ msgid "Hide"
+#~ msgstr "Gjem"
+
+#~ msgid "Select All"
+#~ msgstr "Velg alle"
+
+#~ msgid "Unselect All"
+#~ msgstr "Fjern alle valg"
#~ msgid ""
#~ "It is now time to configure the graphic server. First of all, choose your "
@@ -2170,17 +2424,6 @@ msgstr "Feil ved skriving til fil %s"
#~ msgid "Configure services"
#~ msgstr "Konfigurer tjenester"
-#~ msgid ""
-#~ "You're adding a root partition far on the drive (on a cylinder > 1024),\n"
-#~ "and you have no /boot partition. So if you plan to use lilo (the boot "
-#~ "manager),\n"
-#~ "be careful to add a /boot partition"
-#~ msgstr ""
-#~ "Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
-#~ "sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
-#~ "bruke lilo (oppstartshåndtereren),\n"
-#~ "vær nøye med å legge til en /boot partisjon"
-
#~ msgid "Give your graphic card memory size"
#~ msgstr "Oppgi hvor mye minne grafikk-kortet ditt har"
@@ -2205,9 +2448,6 @@ msgstr "Feil ved skriving til fil %s"
#~ msgid "Configuring network device %s"
#~ msgstr "Konfigurerer nettverks-enhet %s"
-#~ msgid "Where do you want to mount device %s?"
-#~ msgstr "Hvor vil du montere %s enheten?"
-
#~ msgid "Package ordering failed"
#~ msgstr "Pakkelevering mislykket"