diff options
Diffstat (limited to 'perl-install/share/po/id.po')
| -rw-r--r-- | perl-install/share/po/id.po | 5335 |
1 files changed, 703 insertions, 4632 deletions
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po index b2b49985a..d5ec222c5 100644 --- a/perl-install/share/po/id.po +++ b/perl-install/share/po/id.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX 0.1\n" -"POT-Creation-Date: 2002-09-11 13:59+0200\n" +"POT-Creation-Date: 2002-09-13 22:00+0200\n" "PO-Revision-Date: 2002-09-08 11:57+0900\n" "Last-Translator: Budi Rachmanto <rac@linux-mandrake.com>\n" "Language-Team: Bahasa Indonesia <id@li.org>\n" @@ -196,8 +196,8 @@ msgid "Ok" msgstr "Ok" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 -#: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3155 -#: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:224 +#: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3203 +#: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:225 msgid "Quit" msgstr "Keluar" @@ -298,13 +298,13 @@ msgid "Graphics card: %s" msgstr "Kartu grafis: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1019 -#: ../../bootlook.pm_.c:343 ../../diskdrake/smbnfs_gtk.pm_.c:87 +#: ../../bootlook.pm_.c:344 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:354 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:195 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 -#: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2124 +#: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2169 #: ../../security/main.pm_.c:295 ../../standalone/drakautoinst_.c:203 #: ../../standalone/drakbackup_.c:3928 ../../standalone/drakbackup_.c:3961 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4014 @@ -313,8 +313,8 @@ msgstr "Kartu grafis: %s" #: ../../standalone/drakbackup_.c:4184 ../../standalone/drakconnect_.c:115 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 -#: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfont_.c:970 -#: ../../standalone/drakgw_.c:536 ../../standalone/logdrake_.c:224 +#: ../../standalone/drakfloppy_.c:235 ../../standalone/drakfont_.c:970 +#: ../../standalone/drakgw_.c:532 ../../standalone/logdrake_.c:225 #: ../../ugtk.pm_.c:296 msgid "Cancel" msgstr "Batal" @@ -507,7 +507,7 @@ msgstr "Delay sebelum boot ke image default" #: ../../any.pm_.c:170 ../../any.pm_.c:789 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1094 ../../network/modem.pm_.c:48 -#: ../../printerdrake.pm_.c:850 ../../printerdrake.pm_.c:965 +#: ../../printerdrake.pm_.c:865 ../../printerdrake.pm_.c:980 #: ../../standalone/drakbackup_.c:3530 ../../standalone/drakconnect_.c:624 #: ../../standalone/drakconnect_.c:649 msgid "Password" @@ -615,7 +615,7 @@ msgstr "Tambah" #: ../../any.pm_.c:258 ../../any.pm_.c:777 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 -#: ../../printerdrake.pm_.c:3155 ../../standalone/drakbackup_.c:2774 +#: ../../printerdrake.pm_.c:3203 ../../standalone/drakbackup_.c:2774 msgid "Done" msgstr "Selesai" @@ -881,8 +881,8 @@ msgstr "Buat user" msgid "Real name" msgstr "Nama Lengkap" -#: ../../any.pm_.c:788 ../../printerdrake.pm_.c:849 -#: ../../printerdrake.pm_.c:964 +#: ../../any.pm_.c:788 ../../printerdrake.pm_.c:864 +#: ../../printerdrake.pm_.c:979 msgid "User name" msgstr "Nama user" @@ -938,7 +938,7 @@ msgstr "Izinkan semua user" msgid "No sharing" msgstr "Tiada pemakaian bersama" -#: ../../any.pm_.c:988 ../../install_any.pm_.c:1198 ../../standalone.pm_.c:58 +#: ../../any.pm_.c:988 ../../install_any.pm_.c:1199 ../../standalone.pm_.c:59 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Paket %s perlu diupgrade. Anda ingin instal?" @@ -948,7 +948,7 @@ msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "Anda dapat mengekspor dg NFS atau Samba. Pilih yg Anda ingin." -#: ../../any.pm_.c:999 ../../install_any.pm_.c:1203 ../../standalone.pm_.c:63 +#: ../../any.pm_.c:999 ../../install_any.pm_.c:1204 ../../standalone.pm_.c:64 #, c-format msgid "Mandatory package %s is missing" msgstr "Paket wajib %s hilang" @@ -1182,18 +1182,18 @@ msgid "Boot Style Configuration" msgstr "Konfigurasi Tipe Boot" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:62 -#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:81 -#: ../../standalone/logdrake_.c:101 +#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:82 +#: ../../standalone/logdrake_.c:102 msgid "/_File" msgstr "/_File" -#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:82 -#: ../../standalone/logdrake_.c:107 +#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83 +#: ../../standalone/logdrake_.c:108 msgid "/File/_Quit" msgstr "/File/_Keluar" #: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:63 -#: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107 +#: ../../standalone/drakfloppy_.c:83 ../../standalone/logdrake_.c:108 msgid "<control>Q" msgstr "<control>Q" @@ -1230,21 +1230,25 @@ msgid "Install themes" msgstr "Instal tema" #: ../../bootlook.pm_.c:147 -msgid "Display theme under console" -msgstr "Display tema di konsol" +msgid "" +"Display theme\n" +"under console" +msgstr "" +"Display tema\n" +"di konsol" #: ../../bootlook.pm_.c:148 msgid "Create new theme" msgstr "Buat tema baru" -#: ../../bootlook.pm_.c:192 +#: ../../bootlook.pm_.c:193 #, c-format msgid "Backup %s to %s.old" msgstr "Backup %s ke %s.old" -#: ../../bootlook.pm_.c:193 ../../bootlook.pm_.c:196 ../../bootlook.pm_.c:199 -#: ../../bootlook.pm_.c:229 ../../bootlook.pm_.c:231 ../../bootlook.pm_.c:241 -#: ../../bootlook.pm_.c:250 ../../bootlook.pm_.c:257 +#: ../../bootlook.pm_.c:194 ../../bootlook.pm_.c:197 ../../bootlook.pm_.c:200 +#: ../../bootlook.pm_.c:230 ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:242 +#: ../../bootlook.pm_.c:251 ../../bootlook.pm_.c:258 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:116 #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:355 #: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/interactive.pm_.c:474 @@ -1255,33 +1259,33 @@ msgstr "Backup %s ke %s.old" msgid "Error" msgstr "Ada Kesalahan" -#: ../../bootlook.pm_.c:193 +#: ../../bootlook.pm_.c:194 msgid "unable to backup lilo message" msgstr "gagal mem-backup pesan lilo" -#: ../../bootlook.pm_.c:195 +#: ../../bootlook.pm_.c:196 #, c-format msgid "Copy %s to %s" msgstr "Salin %s ke %s" -#: ../../bootlook.pm_.c:196 +#: ../../bootlook.pm_.c:197 msgid "can't change lilo message" msgstr "tak dapat mengubah pesan lilo" -#: ../../bootlook.pm_.c:199 +#: ../../bootlook.pm_.c:200 msgid "Lilo message not found" msgstr "Pesan lilo tak ditemukan" -#: ../../bootlook.pm_.c:229 +#: ../../bootlook.pm_.c:230 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "Tak dapat menulis /etc/sysconfig/bootsplash." -#: ../../bootlook.pm_.c:229 +#: ../../bootlook.pm_.c:230 #, c-format msgid "Write %s" msgstr "Tulis %s" -#: ../../bootlook.pm_.c:231 +#: ../../bootlook.pm_.c:232 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." @@ -1289,17 +1293,17 @@ msgstr "" "Tak dapat menulis /etc/sysconfig/bootsplash\n" "File tak ditemukan." -#: ../../bootlook.pm_.c:242 +#: ../../bootlook.pm_.c:243 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Tak dapat meluncurkan mkinitrd -f /boot/initrd-%s.img %s." -#: ../../bootlook.pm_.c:245 +#: ../../bootlook.pm_.c:246 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "Buat initrd 'mkinitrd -f /boot/initrd-%s.img %s'." -#: ../../bootlook.pm_.c:251 +#: ../../bootlook.pm_.c:252 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." @@ -1308,48 +1312,48 @@ msgstr "" "Luncurkan \"lilo\" sbg root di baris perintah utk menyelesaikan instalasi " "tema LiLo." -#: ../../bootlook.pm_.c:255 +#: ../../bootlook.pm_.c:256 msgid "Relaunch 'lilo'" msgstr "Luncur ulang 'lilo'" -#: ../../bootlook.pm_.c:257 ../../standalone/draksplash_.c:165 +#: ../../bootlook.pm_.c:258 ../../standalone/draksplash_.c:165 #: ../../standalone/draksplash_.c:329 ../../standalone/draksplash_.c:456 msgid "Notice" msgstr "Catatan" -#: ../../bootlook.pm_.c:258 +#: ../../bootlook.pm_.c:259 msgid "LiLo and Bootsplash themes installation successfull" msgstr "Instalasi tema LiLo dan Bootsplash sukses" -#: ../../bootlook.pm_.c:258 +#: ../../bootlook.pm_.c:259 msgid "Theme installation failed!" msgstr "Instalasi tema gagal!" -#: ../../bootlook.pm_.c:266 +#: ../../bootlook.pm_.c:267 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "Manajer Boot: %s. Klik Configure untuk memanggil ahli setup." -#: ../../bootlook.pm_.c:268 ../../standalone/drakbackup_.c:2429 +#: ../../bootlook.pm_.c:269 ../../standalone/drakbackup_.c:2429 #: ../../standalone/drakbackup_.c:2439 ../../standalone/drakbackup_.c:2449 -#: ../../standalone/drakbackup_.c:2457 ../../standalone/drakgw_.c:530 +#: ../../standalone/drakbackup_.c:2457 ../../standalone/drakgw_.c:526 msgid "Configure" msgstr "Konfigurasikan" -#: ../../bootlook.pm_.c:275 +#: ../../bootlook.pm_.c:276 msgid "Splash selection" msgstr "Pilihan Splash" -#: ../../bootlook.pm_.c:278 +#: ../../bootlook.pm_.c:279 msgid "Themes" msgstr "Tema" -#: ../../bootlook.pm_.c:280 +#: ../../bootlook.pm_.c:281 msgid "" "\n" -"Select a theme for\n" +"Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" @@ -1360,31 +1364,31 @@ msgstr "" "Anda dapat memilih\n" "secara terpisah" -#: ../../bootlook.pm_.c:283 +#: ../../bootlook.pm_.c:284 msgid "Lilo screen" msgstr "Layar lilo" -#: ../../bootlook.pm_.c:288 +#: ../../bootlook.pm_.c:289 msgid "Bootsplash" msgstr "Bootsplash" -#: ../../bootlook.pm_.c:323 +#: ../../bootlook.pm_.c:324 msgid "System mode" msgstr "Mode sistem" -#: ../../bootlook.pm_.c:325 +#: ../../bootlook.pm_.c:326 msgid "Launch the graphical environment when your system starts" msgstr "Jalankan X-Window saat sistem dimulai" -#: ../../bootlook.pm_.c:330 +#: ../../bootlook.pm_.c:331 msgid "No, I don't want autologin" msgstr "Tidak, saya tak mau autologin" -#: ../../bootlook.pm_.c:332 +#: ../../bootlook.pm_.c:333 msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ya, saya mau autologin dg (user,desktop) ini" -#: ../../bootlook.pm_.c:342 ../../network/netconnect.pm_.c:97 +#: ../../bootlook.pm_.c:343 ../../network/netconnect.pm_.c:97 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 #: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4193 #: ../../standalone/drakbackup_.c:4956 ../../standalone/drakconnect_.c:108 @@ -1397,46 +1401,46 @@ msgstr "Ya, saya mau autologin dg (user,desktop) ini" msgid "OK" msgstr "OK" -#: ../../bootlook.pm_.c:402 +#: ../../bootlook.pm_.c:403 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "gagal baca file /etc/inittab: %s" -#: ../../common.pm_.c:94 +#: ../../common.pm_.c:99 msgid "GB" msgstr "GB" -#: ../../common.pm_.c:94 +#: ../../common.pm_.c:99 msgid "KB" msgstr "KB" -#: ../../common.pm_.c:94 +#: ../../common.pm_.c:99 msgid "MB" msgstr "MB" -#: ../../common.pm_.c:102 +#: ../../common.pm_.c:107 msgid "TB" msgstr "TB" -#: ../../common.pm_.c:110 +#: ../../common.pm_.c:115 #, c-format msgid "%d minutes" msgstr "%d menit" -#: ../../common.pm_.c:112 +#: ../../common.pm_.c:117 msgid "1 minute" msgstr "1 menit" -#: ../../common.pm_.c:114 +#: ../../common.pm_.c:119 #, c-format msgid "%d seconds" msgstr "%d detik" -#: ../../common.pm_.c:159 +#: ../../common.pm_.c:164 msgid "Can't make screenshots before partitioning" msgstr "Gagal membuat screenshot sebelum buat partisi" -#: ../../common.pm_.c:166 +#: ../../common.pm_.c:171 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Screenshot akan tersedia setelah instal di %s" @@ -1996,7 +2000,7 @@ msgstr "Opsi mount" msgid "Various" msgstr "Macam-macam" -#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:103 +#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:104 msgid "device" msgstr "device" @@ -2597,7 +2601,7 @@ msgstr "Kelas media" msgid "class of hardware device" msgstr "kelas alat hardware" -#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1517 +#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1562 msgid "Description" msgstr "Keterangan" @@ -2669,7 +2673,7 @@ msgstr "/_Keluar" #: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65 #: ../../harddrake/ui.pm_.c:71 ../../harddrake/ui.pm_.c:73 -#: ../../standalone/logdrake_.c:110 +#: ../../standalone/logdrake_.c:111 msgid "/_Help" msgstr "/_Tolong" @@ -2819,30 +2823,37 @@ msgstr "aktifkan support radio" msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" -"to learn more. But unlike \"root\", which is the administrator, the users\n" -"you add here will not be entitled to change anything except their own files\n" -"and their own configuration. You will have to create at least one regular\n" -"user for yourself. That account is where you should log in for routine use.\n" -"Although it is very practical to log in as \"root\" everyday, it may also\n" -"be very dangerous! The slightest mistake could mean that your system would\n" -"not work any more. If you make a serious mistake as a regular user, you may\n" -"only lose some information, but not the entire system.\n" -"\n" -"First, you have to enter your real name. This is not mandatory, of course -\n" -"as you can actually enter whatever you want. DrakX will then take the first\n" -"word you have entered in the box and will bring it over to the \"User\n" +"to learn more this concept. But unlike \"root\", which is the\n" +"administrator, the users you add here will not be entitled to change\n" +"anything except their own files and their own configurations. You will have\n" +"to create at least one regular user for yourself. That account is where you\n" +"should log in for routine use. Although it is very practical to log in as\n" +"\"root\" everyday, it may also be very dangerous! The slightest mistake\n" +"could mean that your system would not work any more. If you make a serious\n" +"mistake as a regular user, you may only lose some information, but not the\n" +"entire system.\n" +"\n" +"First, you have to enter your real name. This is not mandatory, of course\n" +"-- as you can actually enter whatever you want. DrakX will then take the\n" +"first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" -"non-privileged (regular) user's password is not as crucial as the \"root\"'\n" +"non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" -"a user for each one of your friends: your father or your sister, for\n" -"example. When you finish adding all the users you want, select \"Done\".\n" +"a user for each one of the people meant to use that computer. When you are\n" +"finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" -"for that user (bash by default)." +"for that user (bash by default).\n" +"\n" +"When you are finished adding all users, you will be proposed to choose a\n" +"user which can automatically log into the system when the computer boots\n" +"up. If you are interested in that feature (and do not care much about local\n" +"security), choose the desired user and window manager, then click \"Yes\".\n" +"If you are not interested in this feature, click \"No\"." msgstr "" "GNU/Linux adalah sistem multiuser, artinya tiap user bisa punya kesukaan,\n" "file dll sendiri. Anda bisa membaca ``User Guide'' utk belajar lebih dalam.\n" @@ -2868,14 +2879,14 @@ msgstr "" "Klik \"Tambahan\" memungkinkan Anda mengubah \"shell\" standar utk user\n" "terkait (standar: bash)." -#: ../../help.pm_.c:41 +#: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a partition for \"/home\"\n" +"separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" @@ -2930,7 +2941,7 @@ msgstr "" "Pada drive SCSI, \"a\" berarti \"hard drive utama, \"b\" berarti \"hard " "drive kedua\", dsb..." -#: ../../help.pm_.c:72 +#: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" @@ -2940,7 +2951,7 @@ msgstr "" "terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian\n" "meminta Anda memasukkan CD yg diperlukan." -#: ../../help.pm_.c:77 +#: ../../help.pm_.c:84 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" @@ -2973,7 +2984,7 @@ msgid "" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" -" * \"With X\": install the fewer packages possible to have a working\n" +" * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" @@ -2989,8 +3000,8 @@ msgid "" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" -"groups to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." +"groups to avoid installing any new package. This is useful to repair or\n" +"update an existing system." msgstr "" "Kini kita tentukan program yg akan diinstal di sistem Anda. Ribuan paket\n" "tersedia di Mandrake Linux, Anda tak perlu mengenal semuanya.\n" @@ -3036,7 +3047,7 @@ msgstr "" "semua group utk menghindari instalasi paket baru. Ini berguna utk reparasi\n" "atau update sistem yg ada." -#: ../../help.pm_.c:128 +#: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" @@ -3047,9 +3058,9 @@ msgid "" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" -"a while to complete the process. An estimate of the time it will take to\n" -"install everything is displayed on the screen, to help you gauge if there\n" -"is sufficient time to enjoy a cup of coffee.\n" +"a while to complete the process. An installation time estimate is displayed\n" +"on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" +"of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" @@ -3070,8 +3081,8 @@ msgid "" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" -"another installation. See the second tip of last step on how to create such\n" -"a floppy." +"another installation. See the second tip of the previous step on how to\n" +"create such a floppy disk." msgstr "" "Akhirnya, tergantung apakah Anda memilih paket sendiri atau tidak, Anda\n" "akan diberi pohon berisi paket terkelompok dg grup/subgrup. Sambil meneliti\n" @@ -3101,12 +3112,12 @@ msgstr "" "dibuat pd akhir instalasi yg lalu. Lihat tip kedua di step terakhir utk\n" "membuat floppy tersebut." -#: ../../help.pm_.c:164 +#: ../../help.pm_.c:171 msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" -"detection fails, uncheck the \"Use auto detection\" box next time. You may\n" +"detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" @@ -3117,8 +3128,8 @@ msgid "" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" -"You can consult the ``User Guide'' chapter about Internet connections for\n" -"details about the configuration, or simply wait until your system is\n" +"You can consult the ``Starter Guide'' chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" @@ -3143,13 +3154,13 @@ msgstr "" "Jika Anda ingin mengkonfigurasi network pasca instalasi atau bila instalasi\n" "jaringan selesai, klik \"Batal\"." -#: ../../help.pm_.c:186 +#: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" -"Here are presented all the services available with the current\n" -"installation. Review them carefully and uncheck those which are not always\n" -"needed at boot time.\n" +"Here are listed all the services available with the current installation.\n" +"Review them carefully and uncheck those which are not always needed at boot\n" +"time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" @@ -3174,7 +3185,7 @@ msgstr "" "bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya\n" "servis yang benar-benar Anda perlukan." -#: ../../help.pm_.c:203 +#: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" @@ -3200,16 +3211,16 @@ msgstr "" "berfungsi. Server waktu akan diinstalkan di mesin Anda dan dapat dipakai\n" "oleh mesin lain di jaringan lokal Anda." -#: ../../help.pm_.c:217 +#: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" -"will try to configure X automatically.\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" -"It is extremely rare for it to fail, unless the hardware is very old (or\n" -"very new). If it succeeds, it will start X automatically with the best\n" -"resolution possible, depending on the size of the monitor. A window will\n" +"You will be presented the list of available resolutions and color depth\n" +"available for your hardware. Choose the one that best suit your needs (you\n" +"will be able to change that after installation though). When you are\n" +"satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" @@ -3219,7 +3230,7 @@ msgid "" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" -"after 10 seconds, restoring the screen. Refer then to the Video\n" +"after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" @@ -3238,7 +3249,7 @@ msgstr "" "berikut. Jika Anda tak dapat melihat pesan, berarti konfigurasi salah dan\n" "10 detik kemudian tes otomatis berakhir dg kembali ke layar semula." -#: ../../help.pm_.c:239 +#: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" @@ -3251,19 +3262,19 @@ msgstr "" "Jelas, Anda ingin menjawab \"Tidak\" jika mesin Anda dijadikan server, atau\n" "jika Anda gagal mengkonfigurasi display." -#: ../../help.pm_.c:246 +#: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" -" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" -"of your main disk (unless you are using another boot manager), to allow you\n" -"to start up with either Windows or GNU/Linux (assuming you have Windows in\n" -"your system). If you need to reinstall Windows, the Microsoft install\n" -"process will rewrite the boot sector, and then you will not be able to\n" -"start GNU/Linux!\n" +" * when installing the bootloader, DrakX will rewrite the boot sector (\n" +"MBR) of your main disk (unless you are using another boot manager), to\n" +"allow you to start up with either Windows or GNU/Linux (assuming you have\n" +"Windows in your system). If you need to reinstall Windows, the Microsoft\n" +"install process will rewrite the boot sector, and then you will not be able\n" +"to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" @@ -3296,14 +3307,13 @@ msgstr "" "harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat sebab\n" "DrakX akan menulis ulang seluruh disket." -#: ../../help.pm_.c:270 +#: ../../help.pm_.c:277 msgid "" -"At this point, you need to choose where you want to install the Mandrake\n" -"Linux operating system on your hard drive. If your hard drive is empty or\n" -"if an existing operating system is using all the available space, you will\n" -"need to partition it. Basically, partitioning a hard drive consists of\n" -"logically dividing it to create space to install your new Mandrake Linux\n" -"system.\n" +"You now need to choose where you want to install the Mandrake Linux\n" +"operating system on your hard drive. If your hard drive is empty or if an\n" +"existing operating system is using all the available space, you will need\n" +"to partition it. Basically, partitioning a hard drive consists of logically\n" +"dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" @@ -3312,9 +3322,9 @@ msgid "" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" -"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" -"From the installation interface, you can use the wizards as described here\n" -"by clicking the dialog's \"Wizard\" button.\n" +"fine-tune your partitions. See the DiskDrake section in the ``Starter\n" +"Guide''. From the installation interface, you can use the wizards as\n" +"described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" @@ -3322,7 +3332,7 @@ msgid "" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" -"available:\n" +"available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" @@ -3333,9 +3343,9 @@ msgid "" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" -" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" -"is installed on your hard drive and takes all the space available on it,\n" -"you have to create free space for Linux data. To do so, you can delete your\n" +" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" +"installed on your hard drive and takes all the space available on it, you\n" +"have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" @@ -3362,10 +3372,10 @@ msgid "" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" -"your hard drive. Be careful - it is a powerful but dangerous choice. You\n" +"your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" -"know what you are doing. To know how do use the DiskDrake utility used\n" -"here, refer to the section ``Managing Your Partitions'' of the ````User\n" +"know what you are doing. To know how to use the DiskDrake utility used\n" +"here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di harddisk.\n" @@ -3424,9 +3434,9 @@ msgstr "" "Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan data\n" "dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan." -#: ../../help.pm_.c:341 +#: ../../help.pm_.c:347 msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" +"There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" @@ -3485,10 +3495,10 @@ msgstr "" "(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, jalankan\n" "\"mformat a:\")" -#: ../../help.pm_.c:372 +#: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a filesystem).\n" +"(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" @@ -3502,7 +3512,7 @@ msgid "" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" -"any of it.\n" +"it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" @@ -3534,7 +3544,7 @@ msgstr "" "Klik \"Tambahan\" jika ingin memilih partisi yg akan dicek blok rusaknya\n" "di disk." -#: ../../help.pm_.c:398 +#: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" @@ -3549,7 +3559,7 @@ msgstr "" "\n" "Sabar..." -#: ../../help.pm_.c:406 +#: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" @@ -3573,20 +3583,20 @@ msgstr "" "dekat. Lalu muncul pohon seleksi paket: lihat lagi pilihan Anda, tekan\n" "\"Instal\" untuk mengambil/nstal paket atau \"Batal\" jika tak jadi." -#: ../../help.pm_.c:419 +#: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" -"all the terms in it, click on the \"Refuse\" button which will immediately\n" -"terminate the installation. To continue with the installation, click on the\n" -"\"Accept\" button." +"all the terms included in it, click on the \"Refuse\" button which will\n" +"immediately terminate the installation. To continue with the installation,\n" +"click on the \"Accept\" button." msgstr "" "Sebelum melanjutkan Anda bacalah lisensi dg baik . Itu mencakup seluruh\n" "distribusi Mandrake Linux, dan jika Anda tak setuju dg semua pasal di\n" "dalamnya, klik \"Tolak\" agar instalasi terhenti. Untuk melanjutkan, klik\n" "\"Terima\"." -#: ../../help.pm_.c:426 +#: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" @@ -3604,7 +3614,7 @@ msgstr "" "\n" "Jika Anda tak tahu apa yg dipilih, tetaplah pada opsi standar." -#: ../../help.pm_.c:436 +#: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" @@ -3622,16 +3632,16 @@ msgid "" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" -"swap partitions in free space of your hard drive;\n" +"swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" -"for later partition-table recovery if necessary. It is strongly recommended\n" -"to perform this step;\n" +"for later partition-table recovery, if necessary. It is strongly\n" +"recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" -"partition table from floppy disk;\n" +"partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" @@ -3735,7 +3745,7 @@ msgstr "" "lebih besar, katakan 50MB, Anda bisa memanfaatkannya utk menyimpan kernel\n" "cadangan dan image ramdisk utk situasi boot darurat." -#: ../../help.pm_.c:507 +#: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" @@ -3796,47 +3806,45 @@ msgstr "" "\"Nama windows\" adalah huruf hard drive Anda pada windows (disk pertama\n" "pada partisi disebut \"C:\")." -#: ../../help.pm_.c:538 +#: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "Sabar... Proses ini akan makan waktu beberapa menit" -#: ../../help.pm_.c:541 +#: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" -"installation or if you want to have greater control (\"Expert\"). You can\n" -"also choose to do a new install or an upgrade of an existing Mandrake Linux\n" -"system:\n" +"installation or if you want to have greater control (\"Expert\") over your\n" +"installation. You can also choose to do a new installation or upgrade your\n" +"existing Mandrake Linux system:\n" "\n" -" * \"Install\": completely wipes out the old system, however, depending on\n" +" * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" -"packages currently installed on your Mandrake Linux system. It keeps the\n" -"current partitions of your hard drives as well as user configurations. All\n" -"other configuration steps remain available, similar to a normal\n" -"installation;\n" +"packages currently installed on your Mandrake Linux system. It keeps your\n" +"hard drives' current partitions as well as user configurations. All other\n" +"configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" -"Upgrades should work fine on Mandrake Linux systems containing version\n" -"\"8.1\" or later.\n" +"Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" +"or later.\n" "\n" -"Depending on your knowledge of GNU/Linux, select one of the following\n" -"choices:\n" +"Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" -" * Expert: if you have a good understanding of GNU/Linux, you may wish to\n" +" * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" -"have to make may be difficult if you do not have good knowledge of\n" -"GNU/Linux, so it is not recommended that those without a fair amount of\n" -"experience select this installation class." +"have to make may be difficult if you do not have good GNU/Linux knowledge,\n" +"so it is not recommended that those without a fair amount of experience\n" +"select this installation class." msgstr "" "DrakX kini perlu tahu Anda ingin instalasi standar (\"Disarankan\") atau\n" "ingin punya kontrol lebih besar (\"Ahli\"). Anda juga punya pilihan utk\n" @@ -3866,7 +3874,7 @@ msgstr "" "Bbrp pertanyaan sulit dijawab jika Anda tak berpengetahuan kuat tentang\n" "GNU/Linux. Jangan pilih kelas ini kecuali Anda tahu apa yang Anda lakukan." -#: ../../help.pm_.c:578 +#: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" @@ -3880,8 +3888,8 @@ msgid "" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" -"asked on next dialog to choose the key binding that will switch the\n" -"keyboard layout between the latin and non latin layouts." +"asked in the next dialog to choose the key binding that will switch the\n" +"keyboard layout between the latin and non-latin layouts." msgstr "" "Normalnya, DrakX memilih papanketik utk Anda (sesuai bahasa yg Anda pilih)\n" "dan Anda bahkan takkan melihat tahap ini. Tapi Anda mungkin tak punya papan\n" @@ -3893,7 +3901,7 @@ msgstr "" "\n" "Klik \"Lagi\" utk menampilkan daftar lengkap keyboard ter-support." -#: ../../help.pm_.c:594 +#: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" @@ -3902,12 +3910,16 @@ msgid "" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" -"applications. For example, if you will host users from Spain on your\n" -"machine, select English as the main language in the tree view and in the\n" -"Advanced section click on the box corresponding to \"Spanish|Spain\".\n" +"applications. For example, if you host users from Spain on your machine,\n" +"select English as the main language in the tree view and in the Advanced\n" +"section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" -"additional locales, click the \"OK\" button to continue." +"additional locales, click the \"OK\" button to continue.\n" +"\n" +"To switch from one language to the other, you can launch the\n" +"\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" +"language, or as a simple user to only change that user's default language." msgstr "" "Pilih bahasa kesukaan Anda utk instalasi dan penggunaan sistem.\n" "\n" @@ -3920,14 +3932,14 @@ msgstr "" "Anda dapat menginstal banyak bahasa. Setelah Anda selesai memilih tambahan\n" "bahasa (locale) klik \"OK\" untuk melanjutkan." -#: ../../help.pm_.c:609 +#: ../../help.pm_.c:617 msgid "" -"DrakX generally detects the number of buttons your mouse has. If not, it\n" -"assumes you have a two-button mouse and will set it up for third-button\n" +"DrakX generally detects the number of buttons your mouse possesses. If not,\n" +"it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" -"If you wish to specify a different type of mouse select the appropriate\n" +"If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" @@ -3935,12 +3947,12 @@ msgid "" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" -"Wheel mouses are sometimes not automatically detected. You will need to\n" +"Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" -"button, a mouse image is displayed. You then need to move the wheel of your\n" -"mouse to activate it correctly. Then test all buttons and movements are\n" -"correct." +"button, a mouse image will be displayed. You then need to move the wheel of\n" +"your mouse to activate it correctly. Then test that all buttons and\n" +"movements are correct." msgstr "" "Secara standar DrakX berasumsi mouse Anda bertombol dua dan akan menset-up\n" "emulasi 3-tombol. DrakX otomatis tahu itu mouse PS/2, serial atau USB.\n" @@ -3952,7 +3964,7 @@ msgstr "" "mouse. Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tak\n" "bekerja baik tekan spasi atau RETURN untuk \"Batal\" dan pilih lagi." -#: ../../help.pm_.c:630 +#: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." @@ -3960,23 +3972,23 @@ msgstr "" "Pilih port yang benar. Misalnya \"COM1\" di Mindows bernama \"ttyS0\" di \n" "GNU/Linux." -#: ../../help.pm_.c:634 -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"root\" is the system\n" -"administrator and is the only one authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if it is too easy. As you can see, you can\n" -"choose not to enter a password, but we strongly advise you against this if\n" -"only for one reason: do not think that because you booted GNU/Linux that\n" -"your other operating systems are safe from mistakes. Since \"root\" can\n" -"overcome all limitations and unintentionally erase all data on partitions\n" -"by carelessly accessing the partitions themselves, it is important for it\n" -"to be difficult to become \"root\".\n" +#: ../../help.pm_.c:642 +msgid "" +"This is the most crucial decision in regards with the security of your\n" +"GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" +"system administrator and is the only one authorized to make updates, add\n" +"users, change the overall system configuration, and so on. In short,\n" +"\"root\" can do everything! That is why you must choose a password that is\n" +"difficult to guess -- DrakX will tell you if it is too easy. As you can\n" +"see, you can choose not to enter a password, but we strongly advise you\n" +"against this if only for one reason: do not think that because you booted\n" +"GNU/Linux that your other operating systems are safe from mistakes. Since\n" +"\"root\" can overcome all limitations and unintentionally erase all data on\n" +"partitions by carelessly accessing the partitions themselves, it is\n" +"important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password - it makes it too\n" +"characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" @@ -3990,9 +4002,9 @@ msgid "" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" -"If your network uses either of the LDAP, NIS, or PDC Windows Domain\n" -"authentication services, select the appropriate one as \"authentication\".\n" -"If you do not know, ask your network administrator.\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one as \"authentication\". If you have no\n" +"clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." @@ -4028,11 +4040,11 @@ msgstr "" "Jika komputer Anda tak terhubung dengan jaringan terkelola, pilihlah\n" "\"File lokal\" untuk otentikasi." -#: ../../help.pm_.c:670 +#: ../../help.pm_.c:678 msgid "" -"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" -"accordingly, depending on what it finds here:\n" +"accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" @@ -4041,14 +4053,14 @@ msgid "" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" -"If in doubt, DrakX will display a dialog with various options.\n" +"if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" -" * \"GRUB\": if you prefer grub (text menu).\n" +" * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" -"interface.\n" +"interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" @@ -4058,7 +4070,7 @@ msgid "" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" -"this is the delay granted to the user to choose - in the bootloader menu,\n" +"this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" @@ -4109,7 +4121,7 @@ msgstr "" "membuat masukan baru; dan \"Selesai\" membawa Anda ke tahap instalasi\n" "berikutnya." -#: ../../help.pm_.c:710 +#: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" @@ -4117,7 +4129,7 @@ msgid "" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" -"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" +"remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" @@ -4134,10 +4146,10 @@ msgstr "" "Anda dapat menghapus entrinya. Tapi untuk bisa masuk ke sistem operasi tsb.\n" "Anda perlu bootdisk nantinya." -#: ../../help.pm_.c:724 +#: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" -"to GNU/Linux.\n" +"GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." @@ -4147,34 +4159,26 @@ msgstr "" "\n" "Kalau Anda kurang tahu, pilih saja \"Sektor pertama di drive (MBR)\"." -#: ../../help.pm_.c:731 +#: ../../help.pm_.c:739 msgid "" -"Here, we select a printing system for your computer. Other OSs may offer\n" -"you one, but Mandrake Linux offers three.\n" +"Here, we select a printing system for your computer. Other OSes may offer\n" +"you one, but Mandrake Linux offers two.\n" "\n" -" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" +" * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" -"if this is your maiden voyage to GNU/Linux. You can change your choices\n" +"if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" -" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n" +" * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" -"graphical front-ends for printing or choosing printer options.\n" -"\n" -" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" -"approximately the same things the others can do, but it will print to\n" -"printers mounted on a Novell Network, because it supports the IPX protocol,\n" -"and it can print directly to shell commands. If you have need of Novell or\n" -"printing to commands without using a separate pipe construct, use lprNG.\n" -"Otherwise, CUPS is preferable as it is simpler and better at working over\n" -"networks." +"graphical front-ends for printing or choosing printer options." msgstr "" "Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n" "Mandrake menyediakan tiga.\n" @@ -4204,7 +4208,7 @@ msgstr "" #: ../../help.pm_.c:759 msgid "" -"DrakX now detects any IDE devices present in your computer. It will also\n" +"DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" @@ -4214,7 +4218,7 @@ msgid "" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" -"clicking \"OK\". Examine the list of hardware and then click on the \"OK\"\n" +"clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" @@ -4223,12 +4227,7 @@ msgid "" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" -"will need to provide options to the driver manually. Please review the\n" -"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" -"Hardware'' section) for hints on retrieving the parameters required from\n" -"hardware documentation, from the manufacturer's web site (if you have\n" -"Internet access) or from Microsoft Windows (if you used this hardware with\n" -"Windows on your system)." +"will need to manually provide options to the driver." msgstr "" "DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n" "SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n" @@ -4252,12 +4251,12 @@ msgstr "" "dari dokumentasi hardware, website pabrik (jika Anda punya akses Internet)\n" "atau wicrosoft mindows (jika Anda memakai hardware ini di windows)." -#: ../../help.pm_.c:786 +#: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" -"For other OSs, the entry consists only of a label and the \"root\"\n" +"For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" @@ -4288,7 +4287,7 @@ msgid "" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" -"read-only, to allow a file system check before the system becomes ``live''.\n" +"read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" @@ -4341,7 +4340,7 @@ msgstr "" "prompt yaboot. Entri ini juga akan ditandai \"*\" jika Anda menekan [Tab]\n" "untuk melihat pilihan boot." -#: ../../help.pm_.c:833 +#: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" @@ -4403,10 +4402,10 @@ msgstr "" " * OS Standar: Anda dapat memilih OS yang akan diboot secara default saat\n" "delay Open Firmware terlampaui." -#: ../../help.pm_.c:865 +#: ../../help.pm_.c:860 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" -"your installed hardware, you may - or not, see the following entries:\n" +"your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" @@ -4421,19 +4420,19 @@ msgid "" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``User\n" +"configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation;\n" +"presented there is similar to the one used at installation time;\n" "\n" -" * \"Sound card\": if a sound card is detected on your system, it is\n" +" * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here. No modification possible at installation time;\n" "\n" -" * \"TV card\": if a TV card is detected on your system, it is displayed\n" -"here. No modification possible at installation time;\n" +" * \"TV card\": if a TV card is detected on your system, it will be\n" +"displayed here. No modification possible at installation time;\n" "\n" -" * \"ISDN card\": if an ISDN card is detected on your system, it is\n" +" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" -"associated with it." +"associated to it." msgstr "" "Di sini disajikan macam-macam parameter mesin Anda. Tergantung hardware yg\n" "ter-instal, Anda dapat - atau tidak, melihat entri berikut:\n" @@ -4459,7 +4458,7 @@ msgstr "" " * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan ditampilkan\n" "di sini. Anda dapat meng-klik tombol utk mengubah parameternya." -#: ../../help.pm_.c:896 +#: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" @@ -4469,14 +4468,14 @@ msgstr "" "Linux Mandrake. Hati-hati, semua data di situ akan hilang dan\n" "tak dapat dikembalikan seperti semula!" -#: ../../help.pm_.c:901 +#: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" -"Click on \"Cancel\" to cancel this operation without losing any data and\n" +"Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Klik \"OK\" bila Anda ingin menghapus semua data dan partisi yang ada di\n" @@ -4502,7 +4501,7 @@ msgstr "" msgid "You must also format %s" msgstr "Anda harus juga memformat %s" -#: ../../install_any.pm_.c:424 +#: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" @@ -4524,7 +4523,7 @@ msgstr "" "\n" "Jadi instal server ini?\n" -#: ../../install_any.pm_.c:442 +#: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" @@ -4537,20 +4536,20 @@ msgstr "" "\n" "Benarkah Anda ingin menghapus paket tersebut?\n" -#: ../../install_any.pm_.c:472 +#: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "Tanpa domain NIS, broadcast tak dapat dipakai" -#: ../../install_any.pm_.c:869 +#: ../../install_any.pm_.c:870 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s" -#: ../../install_any.pm_.c:873 +#: ../../install_any.pm_.c:874 msgid "This floppy is not FAT formatted" msgstr "Disket ini tak diformat dengan sistem FAT" -#: ../../install_any.pm_.c:885 +#: ../../install_any.pm_.c:886 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" @@ -4558,12 +4557,12 @@ msgstr "" "Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah " "instalasi dengan pilihan ''linux defcfg=floppy''" -#: ../../install_any.pm_.c:908 ../../partition_table.pm_.c:767 +#: ../../install_any.pm_.c:909 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "Error saat membaca file %s" -#: ../../install_any.pm_.c:1030 +#: ../../install_any.pm_.c:1031 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" @@ -4802,7 +4801,7 @@ msgstr "" msgid "Welcome to %s" msgstr "Selamat Datang di %s" -#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:770 +#: ../../install_steps.pm_.c:542 ../../install_steps.pm_.c:781 msgid "No floppy drive available" msgstr "Tidak ada floppy drive" @@ -5734,8 +5733,8 @@ msgstr "Mouse" msgid "Timezone" msgstr "Zonawaktu" -#: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2937 -#: ../../printerdrake.pm_.c:3026 +#: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2985 +#: ../../printerdrake.pm_.c:3074 msgid "Printer" msgstr "Printer" @@ -5791,7 +5790,7 @@ msgid "This password is too short (it must be at least %d characters long)" msgstr "Katasandinya terlalu mudah (harus paling tidak %d karakter)" #: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:49 -#: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172 +#: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:173 msgid "Authentication" msgstr "Otentikasi" @@ -5891,7 +5890,7 @@ msgstr "Drive disket Pertama" msgid "Second floppy drive" msgstr "Drive disket kedua" -#: ../../install_steps_interactive.pm_.c:1179 ../../printerdrake.pm_.c:2470 +#: ../../install_steps_interactive.pm_.c:1179 ../../printerdrake.pm_.c:2515 msgid "Skip" msgstr "Lewatkan" @@ -6116,12 +6115,12 @@ msgstr "Pilih file" msgid "Advanced" msgstr "Tambahan" -#: ../../interactive.pm_.c:321 +#: ../../interactive.pm_.c:321 ../../security/main.pm_.c:220 msgid "Basic" msgstr "Dasar" #: ../../interactive/newt.pm_.c:195 ../../my_gtk.pm_.c:158 -#: ../../printerdrake.pm_.c:2124 +#: ../../printerdrake.pm_.c:2169 msgid "<- Previous" msgstr "<- Tahap sebelumnya" @@ -6728,7 +6727,7 @@ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgid "Finish" msgstr "Selesai" -#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2126 +#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2171 msgid "Next ->" msgstr "Lanjutkan ->" @@ -6865,7 +6864,7 @@ msgstr "" "Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.\n" "Tipe koneksi ini tak dapat diset up." -#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:240 +#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:236 msgid "Choose the network interface" msgstr "Pilih interface jaringan" @@ -7203,13 +7202,13 @@ msgstr "Pilih profil yang hendak Anda konfigurasikan" msgid "Use auto detection" msgstr "Gunakan deteksi otomatis" -#: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3151 +#: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3199 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277 -#: ../../standalone/drakfloppy_.c:145 +#: ../../standalone/drakfloppy_.c:146 msgid "Expert Mode" msgstr "Mode Ahli" -#: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:386 +#: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:399 msgid "Detecting devices..." msgstr "Mendeteksi alat..." @@ -7379,7 +7378,7 @@ msgstr "IP otomatis" msgid "Start at boot" msgstr "Start saat boot" -#: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:860 +#: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:875 msgid "IP address should be in format 1.2.3.4" msgstr "Alamat IP harus dalam format 1.2.3.4" @@ -7637,7 +7636,7 @@ msgstr "LPD - Line Printer Daemon" msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" -#: ../../printer.pm_.c:34 ../../printer.pm_.c:1125 +#: ../../printer.pm_.c:34 ../../printer.pm_.c:1144 msgid "CUPS" msgstr "CUPS" @@ -7665,7 +7664,7 @@ msgstr "printer remote" msgid "Printer on remote CUPS server" msgstr "Printer di server CUPS remote" -#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:883 +#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:898 msgid "Printer on remote lpd server" msgstr "Printer di server lpd remote" @@ -7681,7 +7680,7 @@ msgstr "Printer di server SMB/windows 95/98/NT" msgid "Printer on NetWare server" msgstr "Printer di server NetWare" -#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:887 +#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:902 msgid "Enter a printer device URI" msgstr "Masukkan URI device printer" @@ -7689,102 +7688,102 @@ msgstr "Masukkan URI device printer" msgid "Pipe job into a command" msgstr "Pipe job ke perintah" -#: ../../printer.pm_.c:324 ../../printer.pm_.c:366 ../../printer.pm_.c:533 +#: ../../printer.pm_.c:328 ../../printer.pm_.c:370 ../../printer.pm_.c:552 msgid "Unknown Model" msgstr "Model Tak Dikenal" -#: ../../printer.pm_.c:735 ../../printer.pm_.c:926 ../../printer.pm_.c:1318 -#: ../../printerdrake.pm_.c:2260 ../../printerdrake.pm_.c:3414 +#: ../../printer.pm_.c:754 ../../printer.pm_.c:945 ../../printer.pm_.c:1337 +#: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:3462 msgid "Unknown model" msgstr "Model tak dikenal" -#: ../../printer.pm_.c:763 +#: ../../printer.pm_.c:782 msgid "Local Printers" msgstr "Printer Lokal" -#: ../../printer.pm_.c:765 ../../printer.pm_.c:1126 +#: ../../printer.pm_.c:784 ../../printer.pm_.c:1145 msgid "Remote Printers" msgstr "Printer Remote" -#: ../../printer.pm_.c:772 ../../printerdrake.pm_.c:404 +#: ../../printer.pm_.c:791 ../../printerdrake.pm_.c:417 #, c-format msgid " on parallel port \\/*%s" msgstr " di port paralel \\/*%s" -#: ../../printer.pm_.c:775 ../../printerdrake.pm_.c:406 +#: ../../printer.pm_.c:794 ../../printerdrake.pm_.c:419 #, c-format msgid ", USB printer \\/*%s" msgstr ", printer USB \\/*%s" -#: ../../printer.pm_.c:780 +#: ../../printer.pm_.c:799 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", alat multifungsi di port paralel \\/*%s" -#: ../../printer.pm_.c:783 +#: ../../printer.pm_.c:802 msgid ", multi-function device on USB" msgstr ", alat multifungsi di USB" -#: ../../printer.pm_.c:785 +#: ../../printer.pm_.c:804 msgid ", multi-function device on HP JetDirect" msgstr ", alat multifungsi di HP JetDirect" -#: ../../printer.pm_.c:787 +#: ../../printer.pm_.c:806 msgid ", multi-function device" msgstr ", alat multifungsi" -#: ../../printer.pm_.c:790 +#: ../../printer.pm_.c:809 #, c-format msgid ", printing to %s" msgstr ", cetak ke %s" -#: ../../printer.pm_.c:792 +#: ../../printer.pm_.c:811 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " di server LPD \"%s\", printer \"%s\"" -#: ../../printer.pm_.c:794 +#: ../../printer.pm_.c:813 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", host TCP/IP \"%s\", port %s" -#: ../../printer.pm_.c:798 +#: ../../printer.pm_.c:817 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " di server SMB/Mindows \"%s\", share \"%s\"" -#: ../../printer.pm_.c:802 +#: ../../printer.pm_.c:821 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " di server Novell \"%s\", printer \"%s\"" -#: ../../printer.pm_.c:804 +#: ../../printer.pm_.c:823 #, c-format msgid ", using command %s" msgstr ", menggunakan perintah %s" -#: ../../printer.pm_.c:923 ../../printerdrake.pm_.c:1656 +#: ../../printer.pm_.c:942 ../../printerdrake.pm_.c:1701 msgid "Raw printer (No driver)" msgstr "Printer telanjang (tanpa driver)" -#: ../../printer.pm_.c:1095 +#: ../../printer.pm_.c:1114 #, c-format msgid "(on %s)" msgstr "(di %s)" -#: ../../printer.pm_.c:1097 +#: ../../printer.pm_.c:1116 msgid "(on this machine)" msgstr "(di mesin ini)" -#: ../../printer.pm_.c:1122 +#: ../../printer.pm_.c:1141 #, c-format msgid "On CUPS server \"%s\"" msgstr "Di server CUPS \"%s\"" -#: ../../printer.pm_.c:1128 ../../printerdrake.pm_.c:3071 -#: ../../printerdrake.pm_.c:3082 ../../printerdrake.pm_.c:3303 -#: ../../printerdrake.pm_.c:3355 ../../printerdrake.pm_.c:3381 -#: ../../printerdrake.pm_.c:3556 ../../printerdrake.pm_.c:3558 +#: ../../printer.pm_.c:1147 ../../printerdrake.pm_.c:3119 +#: ../../printerdrake.pm_.c:3130 ../../printerdrake.pm_.c:3351 +#: ../../printerdrake.pm_.c:3403 ../../printerdrake.pm_.c:3429 +#: ../../printerdrake.pm_.c:3604 ../../printerdrake.pm_.c:3606 msgid " (Default)" msgstr " (Default)" @@ -7810,11 +7809,11 @@ msgstr "" msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Printer deteksi otomatis (Lokal, TCP/Socket, dan SMB)" -#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3135 +#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3183 msgid "CUPS configuration" msgstr "konfigurasi CUPS" -#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3136 +#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3184 msgid "Specify CUPS server" msgstr "Tentukan server CUPS" @@ -7855,7 +7854,7 @@ msgstr "" msgid "The IP address should look like 192.168.1.20" msgstr "Alamat IP harus seperti 192.168.1.20" -#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1094 +#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1109 msgid "The port number should be an integer!" msgstr "Nomor port harus berupa bilangan bulat" @@ -7863,7 +7862,7 @@ msgstr "Nomor port harus berupa bilangan bulat" msgid "CUPS server IP" msgstr "IP server CUPS" -#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1114 +#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1129 msgid "Port" msgstr "Port" @@ -7872,19 +7871,19 @@ msgid "Automatic CUPS configuration" msgstr "Konfigurasi CUPS otomatis" #: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247 -#: ../../printerdrake.pm_.c:1529 ../../printerdrake.pm_.c:1533 -#: ../../printerdrake.pm_.c:1651 ../../printerdrake.pm_.c:2203 -#: ../../printerdrake.pm_.c:2356 ../../printerdrake.pm_.c:2415 -#: ../../printerdrake.pm_.c:2488 ../../printerdrake.pm_.c:2509 -#: ../../printerdrake.pm_.c:2699 ../../printerdrake.pm_.c:2740 -#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2779 -#: ../../printerdrake.pm_.c:2784 ../../printerdrake.pm_.c:2821 -#: ../../printerdrake.pm_.c:2874 ../../printerdrake.pm_.c:2894 -#: ../../printerdrake.pm_.c:2908 ../../printerdrake.pm_.c:2942 -#: ../../printerdrake.pm_.c:2988 ../../printerdrake.pm_.c:3006 -#: ../../printerdrake.pm_.c:3095 ../../printerdrake.pm_.c:3169 -#: ../../printerdrake.pm_.c:3471 ../../printerdrake.pm_.c:3526 -#: ../../printerdrake.pm_.c:3579 ../../standalone/printerdrake_.c:57 +#: ../../printerdrake.pm_.c:1574 ../../printerdrake.pm_.c:1578 +#: ../../printerdrake.pm_.c:1696 ../../printerdrake.pm_.c:2248 +#: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2460 +#: ../../printerdrake.pm_.c:2533 ../../printerdrake.pm_.c:2554 +#: ../../printerdrake.pm_.c:2747 ../../printerdrake.pm_.c:2788 +#: ../../printerdrake.pm_.c:2793 ../../printerdrake.pm_.c:2827 +#: ../../printerdrake.pm_.c:2832 ../../printerdrake.pm_.c:2869 +#: ../../printerdrake.pm_.c:2922 ../../printerdrake.pm_.c:2942 +#: ../../printerdrake.pm_.c:2956 ../../printerdrake.pm_.c:2990 +#: ../../printerdrake.pm_.c:3036 ../../printerdrake.pm_.c:3054 +#: ../../printerdrake.pm_.c:3143 ../../printerdrake.pm_.c:3217 +#: ../../printerdrake.pm_.c:3519 ../../printerdrake.pm_.c:3574 +#: ../../printerdrake.pm_.c:3627 ../../standalone/printerdrake_.c:57 msgid "Printerdrake" msgstr "Printerdrake" @@ -8000,12 +7999,13 @@ msgstr "" "CATATAN: Akan diinstal piranti lunak tambahan hingga %d MB tergantung model " "printer dan sistem cetak." -#: ../../printerdrake.pm_.c:269 ../../printerdrake.pm_.c:278 -#: ../../printerdrake.pm_.c:3117 ../../printerdrake.pm_.c:3242 +#: ../../printerdrake.pm_.c:279 ../../printerdrake.pm_.c:291 +#: ../../printerdrake.pm_.c:361 ../../printerdrake.pm_.c:3165 +#: ../../printerdrake.pm_.c:3290 msgid "Add a new printer" msgstr "Tambah printer baru" -#: ../../printerdrake.pm_.c:270 +#: ../../printerdrake.pm_.c:280 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" @@ -8027,7 +8027,7 @@ msgstr "" "Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi " "printer." -#: ../../printerdrake.pm_.c:280 +#: ../../printerdrake.pm_.c:293 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" @@ -8065,7 +8065,7 @@ msgstr "" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." -#: ../../printerdrake.pm_.c:289 ../../printerdrake.pm_.c:306 +#: ../../printerdrake.pm_.c:302 ../../printerdrake.pm_.c:319 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" @@ -8090,7 +8090,7 @@ msgstr "" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." -#: ../../printerdrake.pm_.c:297 +#: ../../printerdrake.pm_.c:310 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" @@ -8126,24 +8126,19 @@ msgstr "" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." -#: ../../printerdrake.pm_.c:315 +#: ../../printerdrake.pm_.c:328 msgid "Auto-detect printers connected to this machine" msgstr "Deteksi printer yg terhubung dg mesin ini" -#: ../../printerdrake.pm_.c:318 +#: ../../printerdrake.pm_.c:331 msgid "Auto-detect printers connected directly to the local network" msgstr "Deteksi printer yang terhubung dengan jaringan lokal" -#: ../../printerdrake.pm_.c:321 +#: ../../printerdrake.pm_.c:334 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "Deteksi printer yg terhubung dg mesin Microsoft Windows" -#: ../../printerdrake.pm_.c:348 ../../printerdrake.pm_.c:562 -#: ../../printerdrake.pm_.c:587 -msgid "Local Printer" -msgstr "Printer Lokal" - -#: ../../printerdrake.pm_.c:349 +#: ../../printerdrake.pm_.c:362 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" @@ -8166,49 +8161,53 @@ msgstr "" "ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), " "pilih \"Printer\" di bagian \"Perangkat Keras\" Pusat Kontrol Mandrake." -#: ../../printerdrake.pm_.c:386 ../../printerdrake.pm_.c:577 -#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030 +#: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:590 +#: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 msgid "Printer auto-detection" msgstr "Deteksi otomatis printer" -#: ../../printerdrake.pm_.c:408 +#: ../../printerdrake.pm_.c:421 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", printer jaringan \"%s\", port %s" -#: ../../printerdrake.pm_.c:410 +#: ../../printerdrake.pm_.c:423 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", printer \"%s\" di server SMB/Windows \"%s\"" -#: ../../printerdrake.pm_.c:416 +#: ../../printerdrake.pm_.c:429 #, c-format msgid "Detected %s" msgstr "Terdeteksi %s" -#: ../../printerdrake.pm_.c:420 ../../printerdrake.pm_.c:451 -#: ../../printerdrake.pm_.c:470 +#: ../../printerdrake.pm_.c:433 ../../printerdrake.pm_.c:464 +#: ../../printerdrake.pm_.c:483 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "Printer di port paralel \\/*%s" -#: ../../printerdrake.pm_.c:422 ../../printerdrake.pm_.c:453 -#: ../../printerdrake.pm_.c:475 +#: ../../printerdrake.pm_.c:435 ../../printerdrake.pm_.c:466 +#: ../../printerdrake.pm_.c:488 #, c-format msgid "USB printer \\/*%s" msgstr "printer USB \\/*%s" -#: ../../printerdrake.pm_.c:424 +#: ../../printerdrake.pm_.c:437 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Printer jaringan \"%s\", port %s" -#: ../../printerdrake.pm_.c:426 +#: ../../printerdrake.pm_.c:439 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Printer \"%s\" di server SMB/Windows \"%s\"" -#: ../../printerdrake.pm_.c:563 +#: ../../printerdrake.pm_.c:575 ../../printerdrake.pm_.c:600 +msgid "Local Printer" +msgstr "Printer Lokal" + +#: ../../printerdrake.pm_.c:576 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " @@ -8220,19 +8219,19 @@ msgstr "" "sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer " "USB kedua: /dev/usb/lp1, ...)." -#: ../../printerdrake.pm_.c:567 +#: ../../printerdrake.pm_.c:580 msgid "You must enter a device or file name!" msgstr "Masukkan nama alat atau file!" -#: ../../printerdrake.pm_.c:578 +#: ../../printerdrake.pm_.c:591 msgid "No printer found!" msgstr "Printer tak ditemukan!" -#: ../../printerdrake.pm_.c:588 +#: ../../printerdrake.pm_.c:601 msgid "Available printers" msgstr "Printer yg tersedia" -#: ../../printerdrake.pm_.c:592 +#: ../../printerdrake.pm_.c:605 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" @@ -8240,7 +8239,7 @@ msgstr "" "Printer berikut terdeteksi otomatis, jika bukan yang ingin dikonfigurasikan, " "masukkan nama alat/file di baris masukan" -#: ../../printerdrake.pm_.c:593 +#: ../../printerdrake.pm_.c:606 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" @@ -8248,7 +8247,7 @@ msgstr "" "Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up " "atau masukkan nama alat/file di baris masukan" -#: ../../printerdrake.pm_.c:595 +#: ../../printerdrake.pm_.c:608 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " @@ -8259,7 +8258,7 @@ msgstr "" "otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda " "konfigurasi sendiri, jalankan \"Konfigurasi manual\"." -#: ../../printerdrake.pm_.c:596 +#: ../../printerdrake.pm_.c:609 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " @@ -8271,7 +8270,7 @@ msgstr "" "dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan " "\"Konfigurasi manual\"." -#: ../../printerdrake.pm_.c:598 +#: ../../printerdrake.pm_.c:611 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" @@ -8279,11 +8278,11 @@ msgstr "" "Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di " "baris masukan" -#: ../../printerdrake.pm_.c:599 +#: ../../printerdrake.pm_.c:612 msgid "Please choose the port where your printer is connected to." msgstr "Pilihlah port tempat printer Anda terhubung." -#: ../../printerdrake.pm_.c:601 +#: ../../printerdrake.pm_.c:614 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." @@ -8291,19 +8290,19 @@ msgstr "" " (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., " "printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...)." -#: ../../printerdrake.pm_.c:606 +#: ../../printerdrake.pm_.c:619 msgid "You must choose/enter a printer/device!" msgstr "Pilih/masukkan printer/device!" -#: ../../printerdrake.pm_.c:626 +#: ../../printerdrake.pm_.c:639 msgid "Manual configuration" msgstr "Konfigurasi manual" -#: ../../printerdrake.pm_.c:680 +#: ../../printerdrake.pm_.c:693 msgid "Remote lpd Printer Options" msgstr "Pilihan printer lpd remote" -#: ../../printerdrake.pm_.c:681 +#: ../../printerdrake.pm_.c:694 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." @@ -8311,46 +8310,46 @@ msgstr "" "Untuk memakai printer lpd remote, berikan nama host\n" "server printer dan nama printer di server tsb." -#: ../../printerdrake.pm_.c:682 +#: ../../printerdrake.pm_.c:695 msgid "Remote host name" msgstr "Nama host remote" -#: ../../printerdrake.pm_.c:683 +#: ../../printerdrake.pm_.c:696 msgid "Remote printer name" msgstr "Nama printer remote" -#: ../../printerdrake.pm_.c:686 +#: ../../printerdrake.pm_.c:699 msgid "Remote host name missing!" msgstr "Nama host remote hilang!" -#: ../../printerdrake.pm_.c:690 +#: ../../printerdrake.pm_.c:703 msgid "Remote printer name missing!" msgstr "Nama printer remote hilang!" -#: ../../printerdrake.pm_.c:712 ../../printerdrake.pm_.c:1225 +#: ../../printerdrake.pm_.c:727 ../../printerdrake.pm_.c:1244 #, c-format msgid "Detected model: %s %s" msgstr "Terdeteksi model: %s %s" -#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030 +#: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 msgid "Scanning network..." msgstr "Jaringan sedang di-scan..." -#: ../../printerdrake.pm_.c:799 ../../printerdrake.pm_.c:820 +#: ../../printerdrake.pm_.c:814 ../../printerdrake.pm_.c:835 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", printer \"%s\" di server \"%s\"" -#: ../../printerdrake.pm_.c:802 ../../printerdrake.pm_.c:823 +#: ../../printerdrake.pm_.c:817 ../../printerdrake.pm_.c:838 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Printer \"%s\" di server \"%s\"" -#: ../../printerdrake.pm_.c:843 +#: ../../printerdrake.pm_.c:858 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Pilihan printer SMB (windows 95/NT)" -#: ../../printerdrake.pm_.c:844 +#: ../../printerdrake.pm_.c:859 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " @@ -8362,7 +8361,7 @@ msgstr "" "share printer yang ingin Anda akses, juga nama user, katasandi, dan info " "workgroup." -#: ../../printerdrake.pm_.c:845 +#: ../../printerdrake.pm_.c:860 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." @@ -8370,39 +8369,39 @@ msgstr "" " Jika printer yg diinginkan terdeteksi, pilihlah dari daftar lalu tambahkan " "nama user, katasandi, dan/atau grupkerja jika perlu." -#: ../../printerdrake.pm_.c:846 +#: ../../printerdrake.pm_.c:861 msgid "SMB server host" msgstr "Host server SMB" -#: ../../printerdrake.pm_.c:847 +#: ../../printerdrake.pm_.c:862 msgid "SMB server IP" msgstr "IP server SMB" -#: ../../printerdrake.pm_.c:848 +#: ../../printerdrake.pm_.c:863 msgid "Share name" msgstr "Nama share" -#: ../../printerdrake.pm_.c:851 +#: ../../printerdrake.pm_.c:866 msgid "Workgroup" msgstr "Grupkerja" -#: ../../printerdrake.pm_.c:853 +#: ../../printerdrake.pm_.c:868 msgid "Auto-detected" msgstr "Otomatis terdeteksi" -#: ../../printerdrake.pm_.c:864 +#: ../../printerdrake.pm_.c:879 msgid "Either the server name or the server's IP must be given!" msgstr "Harus ada nama/IP server!" -#: ../../printerdrake.pm_.c:868 +#: ../../printerdrake.pm_.c:883 msgid "Samba share name missing!" msgstr "Nama share Samba hilang!" -#: ../../printerdrake.pm_.c:874 +#: ../../printerdrake.pm_.c:889 msgid "SECURITY WARNING!" msgstr "PERINGATAN KEAMANAN!" -#: ../../printerdrake.pm_.c:875 +#: ../../printerdrake.pm_.c:890 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " @@ -8444,7 +8443,7 @@ msgstr "" "Printerdrake.\n" "\n" -#: ../../printerdrake.pm_.c:885 +#: ../../printerdrake.pm_.c:900 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " @@ -8455,7 +8454,7 @@ msgstr "" "Set up server Windows Anda agar printer tersedia di protokol IPP dan set up " "pencetakan dari mesin ini dengan tipe koneksi \"%s\" di Printerdrake.\n" -#: ../../printerdrake.pm_.c:888 +#: ../../printerdrake.pm_.c:903 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" @@ -8467,11 +8466,11 @@ msgstr "" "\n" "Anda ingin lanjutkan set up printer ini seperti yang Anda lakukan sekarang?" -#: ../../printerdrake.pm_.c:960 +#: ../../printerdrake.pm_.c:975 msgid "NetWare Printer Options" msgstr "Pilihan printer NetWare" -#: ../../printerdrake.pm_.c:961 +#: ../../printerdrake.pm_.c:976 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " @@ -8482,37 +8481,37 @@ msgstr "" "NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer " "yang ingin digunakan beserta nama user dan katasandinya." -#: ../../printerdrake.pm_.c:962 +#: ../../printerdrake.pm_.c:977 msgid "Printer Server" msgstr "Server Printer" -#: ../../printerdrake.pm_.c:963 +#: ../../printerdrake.pm_.c:978 msgid "Print Queue Name" msgstr "Nama antrian printer" -#: ../../printerdrake.pm_.c:968 +#: ../../printerdrake.pm_.c:983 msgid "NCP server name missing!" msgstr "Nama server NCP hilang!" -#: ../../printerdrake.pm_.c:972 +#: ../../printerdrake.pm_.c:987 msgid "NCP queue name missing!" msgstr "Nama antrian NCP hilang!" -#: ../../printerdrake.pm_.c:1039 ../../printerdrake.pm_.c:1059 +#: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1074 #, c-format msgid ", host \"%s\", port %s" msgstr ", host \"%s\", port %s" -#: ../../printerdrake.pm_.c:1042 ../../printerdrake.pm_.c:1062 +#: ../../printerdrake.pm_.c:1057 ../../printerdrake.pm_.c:1077 #, c-format msgid "Host \"%s\", port %s" msgstr "Host \"%s\", port %s" -#: ../../printerdrake.pm_.c:1082 +#: ../../printerdrake.pm_.c:1097 msgid "TCP/Socket Printer Options" msgstr "Opsi Printer TCP/Soket" -#: ../../printerdrake.pm_.c:1084 +#: ../../printerdrake.pm_.c:1099 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." @@ -8520,7 +8519,7 @@ msgstr "" "Pilih satu printer dari daftar atau isilah namahost atau IP dan nomor port " "opsional (default 9100)." -#: ../../printerdrake.pm_.c:1085 +#: ../../printerdrake.pm_.c:1100 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " @@ -8531,19 +8530,19 @@ msgstr "" "nomor portnya (default 9100). Nomor port server HP JetDirect biasanya 9100, " "server lain mungkin bervariasi. Lihat manual perangkat keras Anda." -#: ../../printerdrake.pm_.c:1090 +#: ../../printerdrake.pm_.c:1105 msgid "Printer host name or IP missing!" msgstr "Nama host printer atau IP tidak ada!" -#: ../../printerdrake.pm_.c:1112 +#: ../../printerdrake.pm_.c:1127 msgid "Printer host name or IP" msgstr "Nama host atau IP printer" -#: ../../printerdrake.pm_.c:1160 ../../printerdrake.pm_.c:1162 +#: ../../printerdrake.pm_.c:1177 ../../printerdrake.pm_.c:1179 msgid "Printer Device URI" msgstr "Device Printer URI" -#: ../../printerdrake.pm_.c:1161 +#: ../../printerdrake.pm_.c:1178 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " @@ -8553,11 +8552,11 @@ msgstr "" "spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua " "spooler." -#: ../../printerdrake.pm_.c:1176 +#: ../../printerdrake.pm_.c:1193 msgid "A valid URI must be entered!" msgstr "Harus diisi URI valid!" -#: ../../printerdrake.pm_.c:1515 +#: ../../printerdrake.pm_.c:1560 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." @@ -8565,27 +8564,27 @@ msgstr "" "Tiap printer perlu nama (misalnya \"printer\"). Kolom Penjelasan / Lokasi " "tak harus terisi. Itu komentar utk user." -#: ../../printerdrake.pm_.c:1516 +#: ../../printerdrake.pm_.c:1561 msgid "Name of printer" msgstr "Nama Printer" -#: ../../printerdrake.pm_.c:1518 +#: ../../printerdrake.pm_.c:1563 msgid "Location" msgstr "Lokasi" -#: ../../printerdrake.pm_.c:1530 ../../printerdrake.pm_.c:1652 +#: ../../printerdrake.pm_.c:1575 ../../printerdrake.pm_.c:1697 msgid "Reading printer database..." msgstr "Pembacaan database printer..." -#: ../../printerdrake.pm_.c:1534 +#: ../../printerdrake.pm_.c:1579 msgid "Preparing printer database..." msgstr "Persiapan database printer ..." -#: ../../printerdrake.pm_.c:1631 +#: ../../printerdrake.pm_.c:1676 msgid "Your printer model" msgstr "Model printer Anda" -#: ../../printerdrake.pm_.c:1632 +#: ../../printerdrake.pm_.c:1677 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" @@ -8610,24 +8609,24 @@ msgstr "" "\n" "%s" -#: ../../printerdrake.pm_.c:1637 ../../printerdrake.pm_.c:1640 +#: ../../printerdrake.pm_.c:1682 ../../printerdrake.pm_.c:1685 msgid "The model is correct" msgstr "Model sudah benar" -#: ../../printerdrake.pm_.c:1638 ../../printerdrake.pm_.c:1639 -#: ../../printerdrake.pm_.c:1642 +#: ../../printerdrake.pm_.c:1683 ../../printerdrake.pm_.c:1684 +#: ../../printerdrake.pm_.c:1687 msgid "Select model manually" msgstr "Pilih model secara manual" -#: ../../printerdrake.pm_.c:1659 +#: ../../printerdrake.pm_.c:1704 msgid "Printer model selection" msgstr "Seleksi model printer" -#: ../../printerdrake.pm_.c:1660 +#: ../../printerdrake.pm_.c:1705 msgid "Which printer model do you have?" msgstr "Anda punya model printer mana?" -#: ../../printerdrake.pm_.c:1661 +#: ../../printerdrake.pm_.c:1706 msgid "" "\n" "\n" @@ -8641,7 +8640,7 @@ msgstr "" "benar. Cari model yang benar di daftar jika kursor menunjukkan model yang " "salah atau di \"Printer telanjang\"." -#: ../../printerdrake.pm_.c:1664 +#: ../../printerdrake.pm_.c:1709 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." @@ -8649,11 +8648,11 @@ msgstr "" "Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau " "yang mirip." -#: ../../printerdrake.pm_.c:1741 +#: ../../printerdrake.pm_.c:1786 msgid "OKI winprinter configuration" msgstr "Konfigurasi winprinter OKI" -#: ../../printerdrake.pm_.c:1742 +#: ../../printerdrake.pm_.c:1787 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " @@ -8669,11 +8668,11 @@ msgstr "" "cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan " "diabaikan oleh driver." -#: ../../printerdrake.pm_.c:1785 ../../printerdrake.pm_.c:1812 +#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1857 msgid "Lexmark inkjet configuration" msgstr "Konfigurasi Lexmark inkjet" -#: ../../printerdrake.pm_.c:1786 +#: ../../printerdrake.pm_.c:1831 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " @@ -8684,7 +8683,7 @@ msgstr "" "bukan printer di mesin remote atau kotak server cetak. Hubungkan printer " "Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya." -#: ../../printerdrake.pm_.c:1813 +#: ../../printerdrake.pm_.c:1858 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." @@ -8704,11 +8703,11 @@ msgstr "" "alignment dg \"lexmarkmaintain\" dan cocokkan setting head alignment dg " "program ini." -#: ../../printerdrake.pm_.c:1816 +#: ../../printerdrake.pm_.c:1861 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "Printer Laser GDI dengan Format ZJ-Stream Zenographics" -#: ../../printerdrake.pm_.c:1817 +#: ../../printerdrake.pm_.c:1862 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " @@ -8746,7 +8745,7 @@ msgstr "" "Perintah pertama dapat diberikan oleh pengguna normal, yang kedua harus " "dikerjakan oleh root. Setelah itu Anda baru dapat mencetak.\n" -#: ../../printerdrake.pm_.c:2040 +#: ../../printerdrake.pm_.c:2085 msgid "" "Printer default settings\n" "\n" @@ -8761,22 +8760,22 @@ msgstr "" "perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, " "pencetakan dg kualitas tinggi berjalan amat lambat." -#: ../../printerdrake.pm_.c:2049 +#: ../../printerdrake.pm_.c:2094 #, c-format msgid "Option %s must be an integer number!" msgstr "Opsi %s harus berupa integer!" -#: ../../printerdrake.pm_.c:2053 +#: ../../printerdrake.pm_.c:2098 #, c-format msgid "Option %s must be a number!" msgstr "Opsi %s harus berupa bilangan!" -#: ../../printerdrake.pm_.c:2058 +#: ../../printerdrake.pm_.c:2103 #, c-format msgid "Option %s out of range!" msgstr "Opsi %s keluar batas!" -#: ../../printerdrake.pm_.c:2097 +#: ../../printerdrake.pm_.c:2142 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" @@ -8785,11 +8784,11 @@ msgstr "" "Ingin menset printer ini (\"%s\")\n" "sbg printer standar?" -#: ../../printerdrake.pm_.c:2120 +#: ../../printerdrake.pm_.c:2165 msgid "Test pages" msgstr "Halaman tes" -#: ../../printerdrake.pm_.c:2121 +#: ../../printerdrake.pm_.c:2166 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " @@ -8800,39 +8799,39 @@ msgstr "" "Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser " "bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar." -#: ../../printerdrake.pm_.c:2125 +#: ../../printerdrake.pm_.c:2170 msgid "No test pages" msgstr "Tiada halaman tes" -#: ../../printerdrake.pm_.c:2126 +#: ../../printerdrake.pm_.c:2171 msgid "Print" msgstr "Cetak" -#: ../../printerdrake.pm_.c:2183 +#: ../../printerdrake.pm_.c:2228 msgid "Standard test page" msgstr "Halaman tes standar" -#: ../../printerdrake.pm_.c:2186 +#: ../../printerdrake.pm_.c:2231 msgid "Alternative test page (Letter)" msgstr "Halaman tes alternatif (Letter)" -#: ../../printerdrake.pm_.c:2189 +#: ../../printerdrake.pm_.c:2234 msgid "Alternative test page (A4)" msgstr "Halaman tes alternatif (A4)" -#: ../../printerdrake.pm_.c:2191 +#: ../../printerdrake.pm_.c:2236 msgid "Photo test page" msgstr "Halaman tes foto" -#: ../../printerdrake.pm_.c:2195 +#: ../../printerdrake.pm_.c:2240 msgid "Do not print any test page" msgstr "Jangan cetak halaman tes" -#: ../../printerdrake.pm_.c:2204 ../../printerdrake.pm_.c:2357 +#: ../../printerdrake.pm_.c:2249 ../../printerdrake.pm_.c:2402 msgid "Printing test page(s)..." msgstr "Pencetakan halaman tes..." -#: ../../printerdrake.pm_.c:2229 +#: ../../printerdrake.pm_.c:2274 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" @@ -8847,7 +8846,7 @@ msgstr "" "%s\n" "\n" -#: ../../printerdrake.pm_.c:2233 +#: ../../printerdrake.pm_.c:2278 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" @@ -8855,15 +8854,15 @@ msgstr "" "Halaman test telah dikirim ke printer.\n" "Akan butuh waktu sebentar untuk mulai mencetak.\n" -#: ../../printerdrake.pm_.c:2240 +#: ../../printerdrake.pm_.c:2285 msgid "Did it work properly?" msgstr "Bekerja dg baik?" -#: ../../printerdrake.pm_.c:2262 ../../printerdrake.pm_.c:3416 +#: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:3464 msgid "Raw printer" msgstr "Printer telanjang" -#: ../../printerdrake.pm_.c:2288 +#: ../../printerdrake.pm_.c:2333 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " @@ -8876,7 +8875,7 @@ msgstr "" "<file>\". Alat grafis memungkinkan Anda memilih printer dan memodifikasi " "setting dengan mudah.\n" -#: ../../printerdrake.pm_.c:2290 +#: ../../printerdrake.pm_.c:2335 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " @@ -8886,8 +8885,8 @@ msgstr "" "banyak aplikasi, tapi jangan berikan nama file di sini karena file yang " "dicetak akan diberikan oleh aplikasi.\n" -#: ../../printerdrake.pm_.c:2293 ../../printerdrake.pm_.c:2310 -#: ../../printerdrake.pm_.c:2320 +#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2355 +#: ../../printerdrake.pm_.c:2365 #, c-format msgid "" "\n" @@ -8899,7 +8898,7 @@ msgstr "" "Komando \"%s\" juga memungkinkan modifikasi setting job cetak tertentu. " "Tambahkan setting yang diinginkan ke baris perintah, mis. \"%s <file>\". " -#: ../../printerdrake.pm_.c:2296 ../../printerdrake.pm_.c:2336 +#: ../../printerdrake.pm_.c:2341 ../../printerdrake.pm_.c:2381 #, c-format msgid "" "To know about the options available for the current printer read either the " @@ -8910,7 +8909,7 @@ msgstr "" "\"Daftar opsi cetak\".%s%s\n" "\n" -#: ../../printerdrake.pm_.c:2300 +#: ../../printerdrake.pm_.c:2345 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" @@ -8918,7 +8917,7 @@ msgstr "" "Daftar opsi cetak tersedia untuk printer ini:\n" "\n" -#: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:2315 +#: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2360 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " @@ -8927,8 +8926,8 @@ msgstr "" "Utk mencetak file dari baris komando (window terminal) gunakan perintah \"%s " "<file>\".\n" -#: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:2317 -#: ../../printerdrake.pm_.c:2327 +#: ../../printerdrake.pm_.c:2352 ../../printerdrake.pm_.c:2362 +#: ../../printerdrake.pm_.c:2372 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " @@ -8938,13 +8937,13 @@ msgstr "" "aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan " "diberikan oleh aplikasi.\n" -#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2322 +#: ../../printerdrake.pm_.c:2357 ../../printerdrake.pm_.c:2367 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "Untuk mendapat daftar opsi printer klik \"Daftar opsi cetak\"." -#: ../../printerdrake.pm_.c:2325 +#: ../../printerdrake.pm_.c:2370 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " @@ -8953,7 +8952,7 @@ msgstr "" "Utk mencetak file dari baris komando (jendela terminal) gunakan komando \"%s " "<file>\" atau \"%s <file>\".\n" -#: ../../printerdrake.pm_.c:2329 +#: ../../printerdrake.pm_.c:2374 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" @@ -8968,7 +8967,7 @@ msgstr "" "di desktop, berlabel \"STOP Printer!\", yang menghentikan semua job cetak " "seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.\n" -#: ../../printerdrake.pm_.c:2333 +#: ../../printerdrake.pm_.c:2378 #, c-format msgid "" "\n" @@ -8981,40 +8980,40 @@ msgstr "" "cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya " "\"%s <file>\".\n" -#: ../../printerdrake.pm_.c:2343 +#: ../../printerdrake.pm_.c:2388 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Cetak/Scan/Kartu Foto di \"%s\"" -#: ../../printerdrake.pm_.c:2344 +#: ../../printerdrake.pm_.c:2389 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Cetak/Scan di \"%s\"" -#: ../../printerdrake.pm_.c:2346 +#: ../../printerdrake.pm_.c:2391 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Cetak/Akses Kartu Foto di \"%s\"" -#: ../../printerdrake.pm_.c:2347 +#: ../../printerdrake.pm_.c:2392 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Pencetakan di printer \"%s\"" -#: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2353 -#: ../../printerdrake.pm_.c:2354 ../../printerdrake.pm_.c:2355 -#: ../../printerdrake.pm_.c:3400 ../../standalone/drakTermServ_.c:248 +#: ../../printerdrake.pm_.c:2395 ../../printerdrake.pm_.c:2398 +#: ../../printerdrake.pm_.c:2399 ../../printerdrake.pm_.c:2400 +#: ../../printerdrake.pm_.c:3448 ../../standalone/drakTermServ_.c:248 #: ../../standalone/drakbackup_.c:1562 ../../standalone/drakbackup_.c:4210 #: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705 #: ../../standalone/drakfont_.c:1014 msgid "Close" msgstr "Tutup" -#: ../../printerdrake.pm_.c:2353 +#: ../../printerdrake.pm_.c:2398 msgid "Print option list" msgstr "Daftar opsi cetak" -#: ../../printerdrake.pm_.c:2373 +#: ../../printerdrake.pm_.c:2418 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " @@ -9036,7 +9035,7 @@ msgstr "" "\n" "Jangan pakai \"scannerdrake\" utk alat ini!" -#: ../../printerdrake.pm_.c:2394 +#: ../../printerdrake.pm_.c:2439 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " @@ -9057,17 +9056,17 @@ msgstr "" "printer HP dengan drive kartu foto. Di \"MtoolsFM\" Anda dapat men-switch " "drive dg isian di sudut kanan atas daftar file." -#: ../../printerdrake.pm_.c:2416 ../../printerdrake.pm_.c:2875 -#: ../../printerdrake.pm_.c:3170 +#: ../../printerdrake.pm_.c:2461 ../../printerdrake.pm_.c:2923 +#: ../../printerdrake.pm_.c:3218 msgid "Reading printer data..." msgstr "Pembacaan data printer..." -#: ../../printerdrake.pm_.c:2436 ../../printerdrake.pm_.c:2464 -#: ../../printerdrake.pm_.c:2499 +#: ../../printerdrake.pm_.c:2481 ../../printerdrake.pm_.c:2509 +#: ../../printerdrake.pm_.c:2544 msgid "Transfer printer configuration" msgstr "Transfer konfigurasi printer" -#: ../../printerdrake.pm_.c:2437 +#: ../../printerdrake.pm_.c:2482 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" @@ -9082,7 +9081,7 @@ msgstr "" "ditransfer. \n" "Tak semua antrian dapat ditransfer karena alasan berikut:\n" -#: ../../printerdrake.pm_.c:2440 +#: ../../printerdrake.pm_.c:2485 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" @@ -9090,17 +9089,17 @@ msgstr "" "CUPS tak men-support printer server Novell atau printer yg mengirim data ke " "perintah format-bebas.\n" -#: ../../printerdrake.pm_.c:2442 +#: ../../printerdrake.pm_.c:2487 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.\n" -#: ../../printerdrake.pm_.c:2444 +#: ../../printerdrake.pm_.c:2489 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD and LPRng tak men-support printer IPP.\n" -#: ../../printerdrake.pm_.c:2446 +#: ../../printerdrake.pm_.c:2491 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." @@ -9108,7 +9107,7 @@ msgstr "" "Antrian tak dibuat oleh program ini atau \"foomatic-configure\" tak dapat " "ditransfer." -#: ../../printerdrake.pm_.c:2447 +#: ../../printerdrake.pm_.c:2492 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " @@ -9118,7 +9117,7 @@ msgstr "" "Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS " "asli tak dapat ditransfer." -#: ../../printerdrake.pm_.c:2448 +#: ../../printerdrake.pm_.c:2493 msgid "" "\n" "Mark the printers which you want to transfer and click \n" @@ -9127,15 +9126,15 @@ msgstr "" "\n" "Tandai printer yg ingin Anda transfer lalu klik\"Transfer\"." -#: ../../printerdrake.pm_.c:2451 +#: ../../printerdrake.pm_.c:2496 msgid "Do not transfer printers" msgstr "Jangan transfer printer" -#: ../../printerdrake.pm_.c:2452 ../../printerdrake.pm_.c:2469 +#: ../../printerdrake.pm_.c:2497 ../../printerdrake.pm_.c:2514 msgid "Transfer" msgstr "Transfer" -#: ../../printerdrake.pm_.c:2465 +#: ../../printerdrake.pm_.c:2510 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" @@ -9146,27 +9145,27 @@ msgstr "" "Klik \"Transfer\" untuk menindihnya.\n" "Anda juga dapat menuliskan nama baru atau melewatkan printer ini." -#: ../../printerdrake.pm_.c:2473 +#: ../../printerdrake.pm_.c:2518 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah" -#: ../../printerdrake.pm_.c:2478 +#: ../../printerdrake.pm_.c:2523 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "Sudah ada printer \"%s\", Anda benar ingin menindih konfigurasinya?" -#: ../../printerdrake.pm_.c:2486 +#: ../../printerdrake.pm_.c:2531 msgid "New printer name" msgstr "Nama printer baru" -#: ../../printerdrake.pm_.c:2489 +#: ../../printerdrake.pm_.c:2534 #, c-format msgid "Transferring %s..." msgstr "Pemindahan %s ..." -#: ../../printerdrake.pm_.c:2500 +#: ../../printerdrake.pm_.c:2545 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " @@ -9175,29 +9174,29 @@ msgstr "" "Anda telah men-transfer printer standar lama Anda (\"%s\"), Akankah ia juga " "dijadikan printer default pada sistem cetak baru %s?" -#: ../../printerdrake.pm_.c:2510 +#: ../../printerdrake.pm_.c:2555 msgid "Refreshing printer data..." msgstr "Penyegaran data printer..." -#: ../../printerdrake.pm_.c:2518 ../../printerdrake.pm_.c:2590 -#: ../../printerdrake.pm_.c:2602 +#: ../../printerdrake.pm_.c:2563 ../../printerdrake.pm_.c:2638 +#: ../../printerdrake.pm_.c:2650 msgid "Configuration of a remote printer" msgstr "Konfigurasi printer remote" -#: ../../printerdrake.pm_.c:2519 +#: ../../printerdrake.pm_.c:2564 msgid "Starting network..." msgstr "Pemulaian network..." -#: ../../printerdrake.pm_.c:2554 ../../printerdrake.pm_.c:2558 -#: ../../printerdrake.pm_.c:2560 +#: ../../printerdrake.pm_.c:2599 ../../printerdrake.pm_.c:2603 +#: ../../printerdrake.pm_.c:2605 msgid "Configure the network now" msgstr "Konfigurasikan jaringan sekarang" -#: ../../printerdrake.pm_.c:2555 +#: ../../printerdrake.pm_.c:2600 msgid "Network functionality not configured" msgstr "Fungsi network tak dikonfigurasi" -#: ../../printerdrake.pm_.c:2556 +#: ../../printerdrake.pm_.c:2601 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " @@ -9209,11 +9208,11 @@ msgstr "" "tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda " "konfigurasikan sekarang. Bagaimana Anda mau teruskan?" -#: ../../printerdrake.pm_.c:2559 +#: ../../printerdrake.pm_.c:2604 msgid "Go on without configuring the network" msgstr "Jalan tanpa konfigurasi jaringan" -#: ../../printerdrake.pm_.c:2592 +#: ../../printerdrake.pm_.c:2640 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " @@ -9228,7 +9227,7 @@ msgstr "" "\"Koneksi\", lalu set printer juga dg Pusat Kontrol Mandrake, bagian " "\"Hardware\"/\"Printer\"" -#: ../../printerdrake.pm_.c:2593 +#: ../../printerdrake.pm_.c:2641 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " @@ -9237,24 +9236,24 @@ msgstr "" "Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware " "Anda, lalu coba konfigurasikan printer remote Anda lagi." -#: ../../printerdrake.pm_.c:2603 +#: ../../printerdrake.pm_.c:2651 msgid "Restarting printing system..." msgstr "Mulai ulang sistem cetak ..." -#: ../../printerdrake.pm_.c:2641 +#: ../../printerdrake.pm_.c:2689 msgid "high" msgstr "tinggi" -#: ../../printerdrake.pm_.c:2641 +#: ../../printerdrake.pm_.c:2689 msgid "paranoid" msgstr "pengecut" -#: ../../printerdrake.pm_.c:2642 +#: ../../printerdrake.pm_.c:2690 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Instalasi sistem cetak dalam level keamanan %s" -#: ../../printerdrake.pm_.c:2643 +#: ../../printerdrake.pm_.c:2691 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" @@ -9277,11 +9276,11 @@ msgstr "" "\n" "Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?" -#: ../../printerdrake.pm_.c:2675 +#: ../../printerdrake.pm_.c:2723 msgid "Starting the printing system at boot time" msgstr "Inisiasi sistem cetak pada saat boot" -#: ../../printerdrake.pm_.c:2676 +#: ../../printerdrake.pm_.c:2724 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " @@ -9301,59 +9300,59 @@ msgstr "" "\n" "Anda ingin auto-start sistem cetak dinyalakan lagi?" -#: ../../printerdrake.pm_.c:2700 ../../printerdrake.pm_.c:2741 -#: ../../printerdrake.pm_.c:2780 ../../printerdrake.pm_.c:2822 -#: ../../printerdrake.pm_.c:2943 +#: ../../printerdrake.pm_.c:2748 ../../printerdrake.pm_.c:2789 +#: ../../printerdrake.pm_.c:2828 ../../printerdrake.pm_.c:2870 +#: ../../printerdrake.pm_.c:2991 msgid "Checking installed software..." msgstr "Pemeriksaan perangkat lunak terinstal" -#: ../../printerdrake.pm_.c:2746 +#: ../../printerdrake.pm_.c:2794 msgid "Removing LPRng..." msgstr "Hapus LPRng..." -#: ../../printerdrake.pm_.c:2785 +#: ../../printerdrake.pm_.c:2833 msgid "Removing LPD..." msgstr "Hapus LPD..." -#: ../../printerdrake.pm_.c:2858 +#: ../../printerdrake.pm_.c:2906 msgid "Select Printer Spooler" msgstr "Pilih spooler printer" -#: ../../printerdrake.pm_.c:2859 +#: ../../printerdrake.pm_.c:2907 msgid "Which printing system (spooler) do you want to use?" msgstr "Sistem (spooler) printer mana yang ingin digunakan?" -#: ../../printerdrake.pm_.c:2895 +#: ../../printerdrake.pm_.c:2943 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Konfigurasikan printer \"%s\"..." -#: ../../printerdrake.pm_.c:2909 +#: ../../printerdrake.pm_.c:2957 msgid "Installing Foomatic..." msgstr "Instalasi Foomatic ..." -#: ../../printerdrake.pm_.c:2979 ../../printerdrake.pm_.c:3020 -#: ../../printerdrake.pm_.c:3417 ../../printerdrake.pm_.c:3490 +#: ../../printerdrake.pm_.c:3027 ../../printerdrake.pm_.c:3068 +#: ../../printerdrake.pm_.c:3465 ../../printerdrake.pm_.c:3538 msgid "Printer options" msgstr "Opsi printer" -#: ../../printerdrake.pm_.c:2989 +#: ../../printerdrake.pm_.c:3037 msgid "Preparing Printerdrake..." msgstr "Persiapan PrinterDrake..." -#: ../../printerdrake.pm_.c:3007 ../../printerdrake.pm_.c:3580 +#: ../../printerdrake.pm_.c:3055 ../../printerdrake.pm_.c:3628 msgid "Configuring applications..." msgstr "Konfigurasi aplikasi..." -#: ../../printerdrake.pm_.c:3027 +#: ../../printerdrake.pm_.c:3075 msgid "Would you like to configure printing?" msgstr "Ingin konfigurasi printer?" -#: ../../printerdrake.pm_.c:3039 +#: ../../printerdrake.pm_.c:3087 msgid "Printing system: " msgstr "Sistem cetak: " -#: ../../printerdrake.pm_.c:3099 +#: ../../printerdrake.pm_.c:3147 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " @@ -9365,7 +9364,7 @@ msgstr "" "membuat printer di server CUPS remote dapat dipakai oleh Star Office/" "OpenOffice.org/GIMP." -#: ../../printerdrake.pm_.c:3100 +#: ../../printerdrake.pm_.c:3148 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " @@ -9374,28 +9373,28 @@ msgstr "" "Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi " "setting; membuatnya printer default; atau melihat info tentangnya." -#: ../../printerdrake.pm_.c:3127 +#: ../../printerdrake.pm_.c:3175 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)" -#: ../../printerdrake.pm_.c:3145 +#: ../../printerdrake.pm_.c:3193 msgid "Change the printing system" msgstr "Ubah sistem cetak" -#: ../../printerdrake.pm_.c:3150 ../../standalone/drakconnect_.c:277 +#: ../../printerdrake.pm_.c:3198 ../../standalone/drakconnect_.c:277 msgid "Normal Mode" msgstr "Modus Normal" -#: ../../printerdrake.pm_.c:3310 ../../printerdrake.pm_.c:3360 -#: ../../printerdrake.pm_.c:3573 +#: ../../printerdrake.pm_.c:3358 ../../printerdrake.pm_.c:3408 +#: ../../printerdrake.pm_.c:3621 msgid "Do you want to configure another printer?" msgstr "Ingin konfigurasikan printer lain?" -#: ../../printerdrake.pm_.c:3395 +#: ../../printerdrake.pm_.c:3443 msgid "Modify printer configuration" msgstr "Modifikasi konfigurasi printer" -#: ../../printerdrake.pm_.c:3397 +#: ../../printerdrake.pm_.c:3445 #, c-format msgid "" "Printer %s\n" @@ -9404,102 +9403,102 @@ msgstr "" "Printer %s\n" "Apa yg Anda inginkan utk modifikasi printer ini?" -#: ../../printerdrake.pm_.c:3401 +#: ../../printerdrake.pm_.c:3449 msgid "Do it!" msgstr "Kerjakan!" -#: ../../printerdrake.pm_.c:3406 ../../printerdrake.pm_.c:3461 +#: ../../printerdrake.pm_.c:3454 ../../printerdrake.pm_.c:3509 msgid "Printer connection type" msgstr "Tipe koneksi printer" -#: ../../printerdrake.pm_.c:3407 ../../printerdrake.pm_.c:3465 +#: ../../printerdrake.pm_.c:3455 ../../printerdrake.pm_.c:3513 msgid "Printer name, description, location" msgstr "Nama, penjelasan, lokasi printer" -#: ../../printerdrake.pm_.c:3409 ../../printerdrake.pm_.c:3483 +#: ../../printerdrake.pm_.c:3457 ../../printerdrake.pm_.c:3531 msgid "Printer manufacturer, model, driver" msgstr "Pembuat, model, driver printer" -#: ../../printerdrake.pm_.c:3410 ../../printerdrake.pm_.c:3484 +#: ../../printerdrake.pm_.c:3458 ../../printerdrake.pm_.c:3532 msgid "Printer manufacturer, model" msgstr "Pembuat, model printer" -#: ../../printerdrake.pm_.c:3419 ../../printerdrake.pm_.c:3494 +#: ../../printerdrake.pm_.c:3467 ../../printerdrake.pm_.c:3542 msgid "Set this printer as the default" msgstr "Set printer ini sebagai standar" -#: ../../printerdrake.pm_.c:3421 ../../printerdrake.pm_.c:3499 +#: ../../printerdrake.pm_.c:3469 ../../printerdrake.pm_.c:3547 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Tambah printer ini ke Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3422 ../../printerdrake.pm_.c:3508 +#: ../../printerdrake.pm_.c:3470 ../../printerdrake.pm_.c:3556 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Hapus printer ini dari Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3423 ../../printerdrake.pm_.c:3517 +#: ../../printerdrake.pm_.c:3471 ../../printerdrake.pm_.c:3565 msgid "Print test pages" msgstr "Cetak halaman tes" -#: ../../printerdrake.pm_.c:3424 ../../printerdrake.pm_.c:3519 +#: ../../printerdrake.pm_.c:3472 ../../printerdrake.pm_.c:3567 msgid "Know how to use this printer" msgstr "Cara penggunaan printer ini" -#: ../../printerdrake.pm_.c:3426 ../../printerdrake.pm_.c:3521 +#: ../../printerdrake.pm_.c:3474 ../../printerdrake.pm_.c:3569 msgid "Remove printer" msgstr "Hapus printer" -#: ../../printerdrake.pm_.c:3472 +#: ../../printerdrake.pm_.c:3520 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Menghapus printer lama \"%s\"..." -#: ../../printerdrake.pm_.c:3497 +#: ../../printerdrake.pm_.c:3545 msgid "Default printer" msgstr "Printer standar" -#: ../../printerdrake.pm_.c:3498 +#: ../../printerdrake.pm_.c:3546 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Printer \"%s\" kini diset sbg printer standar." -#: ../../printerdrake.pm_.c:3502 ../../printerdrake.pm_.c:3505 +#: ../../printerdrake.pm_.c:3550 ../../printerdrake.pm_.c:3553 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Penambahan printer ke Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3503 +#: ../../printerdrake.pm_.c:3551 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "Printer \"%s\" sukses ditambahkan ke Star Office/OpenOffice.org/GIMP." -#: ../../printerdrake.pm_.c:3506 +#: ../../printerdrake.pm_.c:3554 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "Gagal menambahkan printer \"%s\" ke Star Office/OpenOffice.org/GIMP." -#: ../../printerdrake.pm_.c:3511 ../../printerdrake.pm_.c:3514 +#: ../../printerdrake.pm_.c:3559 ../../printerdrake.pm_.c:3562 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "Hapus printer dari Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3512 +#: ../../printerdrake.pm_.c:3560 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "Printer \"%s\" sukses dihapus dari Star Office/OpenOffice.org/GIMP." -#: ../../printerdrake.pm_.c:3515 +#: ../../printerdrake.pm_.c:3563 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "Gagal menghapus printer \"%s\" dari Star Office/OpenOffice.org/GIMP." -#: ../../printerdrake.pm_.c:3523 +#: ../../printerdrake.pm_.c:3571 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Anda ingin menghapus printer \"%s\"?" -#: ../../printerdrake.pm_.c:3527 +#: ../../printerdrake.pm_.c:3575 #, c-format msgid "Removing printer \"%s\"..." msgstr "Menghapus printer \"%s\"..." @@ -9595,6 +9594,31 @@ msgstr "mkraid gagal (mungkin raidtoolsnya tak ada?)" msgid "Not enough partitions for RAID level %d\n" msgstr "Partisi tidak cukup untuk level RAID %d\n" +#: ../../security/main.pm_.c:35 +msgid "" +"Standard: This is the standard security recommended for a computer that will " +"be used to connect\n" +" to the Internet as a client.\n" +"\n" +"High: There are already some restrictions, and more automatic checks " +"are run every night.\n" +"\n" +"Higher: The security is now high enough to use the system as a server " +"which can accept\n" +" connections from many clients. If your machine is only a " +"client on the Internet, you\n" +"\t should choose a lower level.\n" +"\n" +"Paranoid: This is similar to the previous level, but the system is entirely " +"closed and security\n" +" features are at their maximum\n" +"\n" +"Security Administrator:\n" +" If the 'Security Alerts' option is set, security alerts will " +"be sent to this user (username or\n" +"\t email)" +msgstr "" + #: ../../security/main.pm_.c:66 msgid "Security Level:" msgstr "Tingkat keamanan:" @@ -9620,6 +9644,21 @@ msgid "" "system security. If you need explanations, click on Help.\n" msgstr "" +#: ../../security/main.pm_.c:226 +#, fuzzy +msgid "Network Options" +msgstr "Opsi Tambahan" + +#: ../../security/main.pm_.c:235 +#, fuzzy +msgid "System Options" +msgstr "Opsi Tambahan" + +#: ../../security/main.pm_.c:242 +#, fuzzy +msgid "Periodic Checks" +msgstr "Cek Keamanan" + #: ../../security/main.pm_.c:256 #, fuzzy msgid "Please wait, setting security level..." @@ -10102,8 +10141,8 @@ msgstr "Jadikan mesin Anda server yang handal" #: ../../share/advertising/09-server.pl_.c:10 msgid "" -"Transform your machine into a powerful Linux server with a few clicks of your " -"mouse: Web server, mail, firewall, router, file and print server, ..." +"Transform your machine into a powerful Linux server with a few clicks of " +"your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" "Jadikan mesin Anda server perkasa dengan hanya beberapa klik mouse: server " "Web, email, firewall, router, server file dan cetak, ..." @@ -10236,7 +10275,7 @@ msgstr "" "produk kami membantu perusahaan Anda dalam bersaing, jika Anda ingin " "membantu pembangunan Mandrake Linux, bergabunglah dengan MandrakeClub!" -#: ../../standalone.pm_.c:41 +#: ../../standalone.pm_.c:42 msgid "Installing packages..." msgstr "Instalasi paket..." @@ -10460,7 +10499,7 @@ msgstr "" "\n" "Parameter instalasi otomatis tersedia di bagian sebelah kiri" -#: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:484 +#: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:480 #: ../../standalone/scannerdrake_.c:119 msgid "Congratulations!" msgstr "Selamat!" @@ -11472,7 +11511,7 @@ msgid "Previous" msgstr "Sebelumnya" #: ../../standalone/drakbackup_.c:3941 ../../standalone/drakbackup_.c:4027 -#: ../../standalone/logdrake_.c:223 +#: ../../standalone/logdrake_.c:224 msgid "Save" msgstr "Simpan" @@ -12355,93 +12394,93 @@ msgstr "Kartu Ethernet" msgid "DHCP Client" msgstr "Klien DHCP" -#: ../../standalone/drakfloppy_.c:63 +#: ../../standalone/drakfloppy_.c:64 msgid "usage: drakfloppy\n" msgstr "pemakaian: drakfloppy\n" -#: ../../standalone/drakfloppy_.c:67 +#: ../../standalone/drakfloppy_.c:68 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" -#: ../../standalone/drakfloppy_.c:68 +#: ../../standalone/drakfloppy_.c:69 msgid "Module name" msgstr "Nama modul" -#: ../../standalone/drakfloppy_.c:68 +#: ../../standalone/drakfloppy_.c:69 msgid "Size" msgstr "Ukuran" -#: ../../standalone/drakfloppy_.c:73 +#: ../../standalone/drakfloppy_.c:74 msgid "drakfloppy" msgstr "drakfloppy" -#: ../../standalone/drakfloppy_.c:90 +#: ../../standalone/drakfloppy_.c:91 msgid "boot disk creation" msgstr "pembuatan bootdisk" -#: ../../standalone/drakfloppy_.c:98 ../../standalone/drakfloppy_.c:111 +#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112 msgid "default" msgstr "standar" -#: ../../standalone/drakfloppy_.c:114 +#: ../../standalone/drakfloppy_.c:115 #, c-format msgid "DrakFloppy Error: %s" msgstr "Error DrakFloppy: %s" -#: ../../standalone/drakfloppy_.c:125 +#: ../../standalone/drakfloppy_.c:126 msgid "kernel version" msgstr "versi kernel" -#: ../../standalone/drakfloppy_.c:131 +#: ../../standalone/drakfloppy_.c:132 msgid "General" msgstr "Umum" -#: ../../standalone/drakfloppy_.c:136 +#: ../../standalone/drakfloppy_.c:137 msgid "Expert Area" msgstr "Area Pakar" -#: ../../standalone/drakfloppy_.c:139 +#: ../../standalone/drakfloppy_.c:140 msgid "mkinitrd optional arguments" msgstr "opsi argumen mkinitrd" -#: ../../standalone/drakfloppy_.c:140 +#: ../../standalone/drakfloppy_.c:141 msgid "Add a module" msgstr "tambah modul" -#: ../../standalone/drakfloppy_.c:160 +#: ../../standalone/drakfloppy_.c:161 msgid "force" msgstr "paksa" -#: ../../standalone/drakfloppy_.c:161 +#: ../../standalone/drakfloppy_.c:162 msgid "if needed" msgstr "jika perlu" -#: ../../standalone/drakfloppy_.c:162 +#: ../../standalone/drakfloppy_.c:163 msgid "omit scsi modules" msgstr "abaikan modul SCSI" -#: ../../standalone/drakfloppy_.c:163 +#: ../../standalone/drakfloppy_.c:164 msgid "omit raid modules" msgstr "abaikan modul RAID" -#: ../../standalone/drakfloppy_.c:199 +#: ../../standalone/drakfloppy_.c:200 msgid "Remove a module" msgstr "Hapus modul" -#: ../../standalone/drakfloppy_.c:221 +#: ../../standalone/drakfloppy_.c:222 msgid "Output" msgstr "Keluaran" -#: ../../standalone/drakfloppy_.c:233 +#: ../../standalone/drakfloppy_.c:234 msgid "Build the disk" msgstr "Buat disk" -#: ../../standalone/drakfloppy_.c:376 +#: ../../standalone/drakfloppy_.c:377 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Pastikan media ada di device %s" -#: ../../standalone/drakfloppy_.c:381 +#: ../../standalone/drakfloppy_.c:382 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" @@ -12450,12 +12489,12 @@ msgstr "" "Media di device %s tidak ada atau write-protected.\n" "Masukkan satu." -#: ../../standalone/drakfloppy_.c:383 +#: ../../standalone/drakfloppy_.c:384 #, c-format msgid "Unable to fork: %s" msgstr "Fork gagal: %s" -#: ../../standalone/drakfloppy_.c:387 +#: ../../standalone/drakfloppy_.c:388 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" @@ -12664,19 +12703,19 @@ msgstr "Hapus font di sistem Anda" msgid "Post Uninstall" msgstr "Un-Instalasi Akhir" -#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:188 +#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:184 msgid "Internet Connection Sharing" msgstr "Pemakaian Bersama Koneksi Internet" -#: ../../standalone/drakgw_.c:119 +#: ../../standalone/drakgw_.c:115 msgid "Sorry, we support only 2.4 kernels." msgstr "Maaf, support hanya untuk kernel 2.4" -#: ../../standalone/drakgw_.c:130 +#: ../../standalone/drakgw_.c:126 msgid "Internet Connection Sharing currently enabled" msgstr "Pemakaian Bersama Koneksi Internet telah aktif" -#: ../../standalone/drakgw_.c:131 +#: ../../standalone/drakgw_.c:127 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" @@ -12688,31 +12727,31 @@ msgstr "" "\n" "Apa yang ingin Anda lakukan?" -#: ../../standalone/drakgw_.c:135 +#: ../../standalone/drakgw_.c:131 msgid "disable" msgstr "matikan" -#: ../../standalone/drakgw_.c:135 ../../standalone/drakgw_.c:160 +#: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "dismiss" msgstr "tutup" -#: ../../standalone/drakgw_.c:135 ../../standalone/drakgw_.c:160 +#: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "reconfigure" msgstr "konfigurasi ulang" -#: ../../standalone/drakgw_.c:138 +#: ../../standalone/drakgw_.c:134 msgid "Disabling servers..." msgstr "Server-server sedang dimatikan" -#: ../../standalone/drakgw_.c:146 +#: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "Internet Connection Sharing telah dimatikan" -#: ../../standalone/drakgw_.c:155 +#: ../../standalone/drakgw_.c:151 msgid "Internet Connection Sharing currently disabled" msgstr "Internet Connection Sharing masih dimatikan" -#: ../../standalone/drakgw_.c:156 +#: ../../standalone/drakgw_.c:152 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" @@ -12724,19 +12763,19 @@ msgstr "" "\n" "Apa yang ingin Anda lakukan?" -#: ../../standalone/drakgw_.c:160 +#: ../../standalone/drakgw_.c:156 msgid "enable" msgstr "aktifkan" -#: ../../standalone/drakgw_.c:167 +#: ../../standalone/drakgw_.c:163 msgid "Enabling servers..." msgstr "Server-server akan dinyalakan" -#: ../../standalone/drakgw_.c:172 +#: ../../standalone/drakgw_.c:168 msgid "Internet connection sharing is now enabled." msgstr "Internet Connection Sharing sudah aktif" -#: ../../standalone/drakgw_.c:189 +#: ../../standalone/drakgw_.c:185 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " @@ -12752,32 +12791,32 @@ msgstr "" "Perhatikan: Anda mesti punya adapter jaringan untuk mensetup Local Area " "Network (LAN)." -#: ../../standalone/drakgw_.c:215 +#: ../../standalone/drakgw_.c:211 #, c-format msgid "Interface %s (using module %s)" msgstr "Interface %s (pakai module %s)" -#: ../../standalone/drakgw_.c:216 +#: ../../standalone/drakgw_.c:212 #, c-format msgid "Interface %s" msgstr "Antarmuka %s" -#: ../../standalone/drakgw_.c:224 +#: ../../standalone/drakgw_.c:220 msgid "No network adapter on your system!" msgstr "Tidak ada adaptor jaringan di sistem ini!" -#: ../../standalone/drakgw_.c:225 +#: ../../standalone/drakgw_.c:221 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware." -#: ../../standalone/drakgw_.c:231 +#: ../../standalone/drakgw_.c:227 msgid "Network interface" msgstr "Antarmuka jaringan" -#: ../../standalone/drakgw_.c:232 +#: ../../standalone/drakgw_.c:228 #, c-format msgid "" "There is only one configured network adapter on your system:\n" @@ -12792,7 +12831,7 @@ msgstr "" "\n" "Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?" -#: ../../standalone/drakgw_.c:241 +#: ../../standalone/drakgw_.c:237 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." @@ -12800,11 +12839,11 @@ msgstr "" "Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network " "Anda." -#: ../../standalone/drakgw_.c:259 +#: ../../standalone/drakgw_.c:255 msgid "Network interface already configured" msgstr "Antarmuka network telah dikonfigurasi" -#: ../../standalone/drakgw_.c:260 +#: ../../standalone/drakgw_.c:256 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" @@ -12819,15 +12858,15 @@ msgstr "" "\n" "Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan." -#: ../../standalone/drakgw_.c:265 +#: ../../standalone/drakgw_.c:261 msgid "Automatic reconfiguration" msgstr "Konfigurasi ulang otomatis" -#: ../../standalone/drakgw_.c:266 +#: ../../standalone/drakgw_.c:262 msgid "Show current interface configuration" msgstr "Tampilkan konfigurasi antarmuka" -#: ../../standalone/drakgw_.c:268 +#: ../../standalone/drakgw_.c:264 #, c-format msgid "" "Current configuration of `%s':\n" @@ -12844,7 +12883,7 @@ msgstr "" "Atribut IP: %s\n" "Driver: %s" -#: ../../standalone/drakgw_.c:280 +#: ../../standalone/drakgw_.c:276 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the C-Class Network that " @@ -12863,41 +12902,41 @@ msgstr "" "Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).\n" "\n" -#: ../../standalone/drakgw_.c:285 +#: ../../standalone/drakgw_.c:281 msgid "C-Class Local Network" msgstr "Jaringan Lokal Kelas-C" -#: ../../standalone/drakgw_.c:286 +#: ../../standalone/drakgw_.c:282 msgid "(This) DHCP Server IP" msgstr "IP Server DHCP (Ini)" -#: ../../standalone/drakgw_.c:287 +#: ../../standalone/drakgw_.c:283 msgid "Re-configure interface and DHCP server" msgstr "Konfigurasi ulang antarmuka dan server DHCP" -#: ../../standalone/drakgw_.c:294 +#: ../../standalone/drakgw_.c:290 msgid "The Local Network did not finish with `.0', bailing out." msgstr "Jaringan Lokal tak berakhiran `.0', keluar." -#: ../../standalone/drakgw_.c:305 +#: ../../standalone/drakgw_.c:301 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Ada potensi konflik alamat LAN pada konfigurasi %s!\n" -#: ../../standalone/drakgw_.c:315 +#: ../../standalone/drakgw_.c:311 msgid "Configuring..." msgstr "Konfigurasi..." -#: ../../standalone/drakgw_.c:316 +#: ../../standalone/drakgw_.c:312 msgid "Configuring scripts, installing software, starting servers..." msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..." -#: ../../standalone/drakgw_.c:352 +#: ../../standalone/drakgw_.c:348 #, c-format msgid "Problems installing package %s" msgstr "Problem instalasi paket %s" -#: ../../standalone/drakgw_.c:485 +#: ../../standalone/drakgw_.c:481 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " @@ -12908,23 +12947,23 @@ msgstr "" "pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi " "jaringan otomatis (DHCP)." -#: ../../standalone/drakgw_.c:504 +#: ../../standalone/drakgw_.c:500 msgid "The setup has already been done, but it's currently disabled." msgstr "Konfigurasi telah seleasi.Namun sekarang masih dimatikan." -#: ../../standalone/drakgw_.c:505 +#: ../../standalone/drakgw_.c:501 msgid "The setup has already been done, and it's currently enabled." msgstr "Konfigurasi telah selesai.Namun sekarang sudah aktif." -#: ../../standalone/drakgw_.c:506 +#: ../../standalone/drakgw_.c:502 msgid "No Internet Connection Sharing has ever been configured." msgstr "Internet Connection Sharing belum pernah dikonfigurasikan" -#: ../../standalone/drakgw_.c:511 +#: ../../standalone/drakgw_.c:507 msgid "Internet connection sharing configuration" msgstr "Koneksi dan konfigurasi sharing Internet" -#: ../../standalone/drakgw_.c:518 +#: ../../standalone/drakgw_.c:514 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" @@ -13431,128 +13470,128 @@ msgstr "Gagal memulai upgrade live !!!\n" msgid "The change is done, but to be effective you must logout" msgstr "Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku" -#: ../../standalone/logdrake_.c:85 ../../ugtk.pm_.c:285 +#: ../../standalone/logdrake_.c:86 ../../ugtk.pm_.c:285 msgid "logdrake" msgstr "logdrake" -#: ../../standalone/logdrake_.c:95 +#: ../../standalone/logdrake_.c:96 msgid "Show only for the selected day" msgstr "Tampilkan hari terpilih saja" -#: ../../standalone/logdrake_.c:102 +#: ../../standalone/logdrake_.c:103 msgid "/File/_New" msgstr "/File/B_aru" -#: ../../standalone/logdrake_.c:102 +#: ../../standalone/logdrake_.c:103 msgid "<control>N" msgstr "<control>N" -#: ../../standalone/logdrake_.c:103 +#: ../../standalone/logdrake_.c:104 msgid "/File/_Open" msgstr "/File/_Buka" -#: ../../standalone/logdrake_.c:103 +#: ../../standalone/logdrake_.c:104 msgid "<control>O" msgstr "<control>O" -#: ../../standalone/logdrake_.c:104 +#: ../../standalone/logdrake_.c:105 msgid "/File/_Save" msgstr "/File/_Simpan" -#: ../../standalone/logdrake_.c:104 +#: ../../standalone/logdrake_.c:105 msgid "<control>S" msgstr "<control>S" -#: ../../standalone/logdrake_.c:105 +#: ../../standalone/logdrake_.c:106 msgid "/File/Save _As" msgstr "/File/Simpan _Dengan nama lain" -#: ../../standalone/logdrake_.c:106 +#: ../../standalone/logdrake_.c:107 msgid "/File/-" msgstr "/File/-" -#: ../../standalone/logdrake_.c:108 +#: ../../standalone/logdrake_.c:109 msgid "/_Options" msgstr "/_Pilihan" -#: ../../standalone/logdrake_.c:109 +#: ../../standalone/logdrake_.c:110 msgid "/Options/Test" msgstr "/Pilihan/Test" -#: ../../standalone/logdrake_.c:111 +#: ../../standalone/logdrake_.c:112 msgid "/Help/_About..." msgstr "/Help/_About..." -#: ../../standalone/logdrake_.c:118 +#: ../../standalone/logdrake_.c:119 msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" -#: ../../standalone/logdrake_.c:119 +#: ../../standalone/logdrake_.c:120 msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" -#: ../../standalone/logdrake_.c:173 +#: ../../standalone/logdrake_.c:174 msgid "User" msgstr "User" -#: ../../standalone/logdrake_.c:174 +#: ../../standalone/logdrake_.c:175 msgid "Messages" msgstr "Pesan" -#: ../../standalone/logdrake_.c:175 +#: ../../standalone/logdrake_.c:176 msgid "Syslog" msgstr "Syslog" -#: ../../standalone/logdrake_.c:176 +#: ../../standalone/logdrake_.c:177 msgid "Mandrake Tools Explanations" msgstr "Penjelasan Piranti Mandrake" -#: ../../standalone/logdrake_.c:179 +#: ../../standalone/logdrake_.c:180 msgid "search" msgstr "cari" -#: ../../standalone/logdrake_.c:185 +#: ../../standalone/logdrake_.c:186 msgid "A tool to monitor your logs" msgstr "Penampil log Anda" -#: ../../standalone/logdrake_.c:186 +#: ../../standalone/logdrake_.c:187 msgid "Settings" msgstr "Setting" -#: ../../standalone/logdrake_.c:191 +#: ../../standalone/logdrake_.c:192 msgid "matching" msgstr "pencocokan" -#: ../../standalone/logdrake_.c:192 +#: ../../standalone/logdrake_.c:193 msgid "but not matching" msgstr "tapi bukan pencocokan" -#: ../../standalone/logdrake_.c:196 +#: ../../standalone/logdrake_.c:197 msgid "Choose file" msgstr "Pilih file" -#: ../../standalone/logdrake_.c:201 +#: ../../standalone/logdrake_.c:202 msgid "Calendar" msgstr "Kalender" -#: ../../standalone/logdrake_.c:211 +#: ../../standalone/logdrake_.c:212 msgid "Content of the file" msgstr "Isi file" -#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:391 +#: ../../standalone/logdrake_.c:216 ../../standalone/logdrake_.c:392 msgid "Mail alert" msgstr "Pemberitahuan Mail" -#: ../../standalone/logdrake_.c:267 +#: ../../standalone/logdrake_.c:268 #, c-format msgid "please wait, parsing file: %s" msgstr "tunggu, sedang menelaah file: %s" -#: ../../standalone/logdrake_.c:408 +#: ../../standalone/logdrake_.c:409 msgid "Mail alert configuration" msgstr "Konfigurasi peringatan Mail" -#: ../../standalone/logdrake_.c:409 +#: ../../standalone/logdrake_.c:410 msgid "" "Welcome to the mail configuration utility.\n" "\n" @@ -13562,64 +13601,64 @@ msgstr "" "\n" "Anda dapat mengeset sistem peringatan.\n" -#: ../../standalone/logdrake_.c:416 +#: ../../standalone/logdrake_.c:417 msgid "Apache World Wide Web Server" msgstr "Server WWW Apache" -#: ../../standalone/logdrake_.c:417 +#: ../../standalone/logdrake_.c:418 msgid "Domain Name Resolver" msgstr "Perumus Nama Domain" -#: ../../standalone/logdrake_.c:418 +#: ../../standalone/logdrake_.c:419 msgid "Ftp Server" msgstr "Server FTP" -#: ../../standalone/logdrake_.c:419 +#: ../../standalone/logdrake_.c:420 msgid "Postfix Mail Server" msgstr "Server Mail Postfix" -#: ../../standalone/logdrake_.c:420 +#: ../../standalone/logdrake_.c:421 msgid "Samba Server" msgstr "Server Samba" -#: ../../standalone/logdrake_.c:421 +#: ../../standalone/logdrake_.c:422 msgid "SSH Server" msgstr "Server SSH" -#: ../../standalone/logdrake_.c:422 +#: ../../standalone/logdrake_.c:423 msgid "Webmin Service" msgstr "Servis Webmin" -#: ../../standalone/logdrake_.c:423 +#: ../../standalone/logdrake_.c:424 msgid "Xinetd Service" msgstr "Server Xinetd" -#: ../../standalone/logdrake_.c:430 +#: ../../standalone/logdrake_.c:431 msgid "service setting" msgstr "setting servis" -#: ../../standalone/logdrake_.c:431 +#: ../../standalone/logdrake_.c:432 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "Anda akan diingatkan bila salah satu servis terpilih terhenti" -#: ../../standalone/logdrake_.c:443 +#: ../../standalone/logdrake_.c:444 msgid "load setting" msgstr "setting muatan" -#: ../../standalone/logdrake_.c:444 +#: ../../standalone/logdrake_.c:445 msgid "You will receive an alert if the load is higher than this value" msgstr "Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini" -#: ../../standalone/logdrake_.c:457 +#: ../../standalone/logdrake_.c:458 msgid "alert configuration" msgstr "konfigurasi peringatan" -#: ../../standalone/logdrake_.c:458 +#: ../../standalone/logdrake_.c:459 msgid "Please enter your email address below " msgstr "Masukkan alamat email Anda di bawah " -#: ../../standalone/logdrake_.c:497 +#: ../../standalone/logdrake_.c:498 msgid "Save as.." msgstr "Simpan sbg.." @@ -14034,3971 +14073,3 @@ msgstr "Multimedia - CD Burning" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Aplikasi Ilmu pengetahuan" - -#~ msgid "" -#~ "\n" -#~ "\n" -#~ "To submit a bug report, click on the button report.\n" -#~ "This will open a web browser window on https://www.bugzilla.com\n" -#~ " where you'll find a form to fill in.The information displayed above will " -#~ "be \n" -#~ "transferred to that server\n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ "\n" -#~ "Klik tombol utk mengirim laporan kutu.\n" -#~ "Ini akan membuka window browser web di https://www.bugzilla.com\n" -#~ "dan akan ada formulir untuk diisi. Info yang tampil di atas akan\n" -#~ "ditransfer ke server tsb\n" -#~ "\n" - -#~ msgid "Make bootsplash step 2" -#~ msgstr "buat bootsplash tahap 2" - -#~ msgid "Go to lilosplash configuration" -#~ msgstr "maju ke konfigurasi lilosplash" - -#~ msgid "Go back" -#~ msgstr "kembali" - -#~ msgid "" -#~ "There's no known OSS/ALSA alternative driver for your sound card (%s)" -#~ msgstr "" -#~ "Tak diketahui adanya driver alternatif OSS/ALSA utk kartu suara Anda (%s)" - -#~ msgid "" -#~ "Introduction\n" -#~ "\n" -#~ "The operating system and the different components available in the " -#~ "Mandrake Linux distribution \n" -#~ "shall be called the \"Software Products\" hereafter. The Software " -#~ "Products include, but are not \n" -#~ "restricted to, the set of programs, methods, rules and documentation " -#~ "related to the operating \n" -#~ "system and the different components of the Mandrake Linux distribution.\n" -#~ "\n" -#~ "\n" -#~ "1. License Agreement\n" -#~ "\n" -#~ "Please read this document carefully. This document is a license agreement " -#~ "between you and \n" -#~ "MandrakeSoft S.A. which applies to the Software Products.\n" -#~ "By installing, duplicating or using the Software Products in any manner, " -#~ "you explicitly \n" -#~ "accept and fully agree to conform to the terms and conditions of this " -#~ "License. \n" -#~ "If you disagree with any portion of the License, you are not allowed to " -#~ "install, duplicate or use \n" -#~ "the Software Products. \n" -#~ "Any attempt to install, duplicate or use the Software Products in a " -#~ "manner which does not comply \n" -#~ "with the terms and conditions of this License is void and will terminate " -#~ "your rights under this \n" -#~ "License. Upon termination of the License, you must immediately destroy " -#~ "all copies of the \n" -#~ "Software Products.\n" -#~ "\n" -#~ "\n" -#~ "2. Limited Warranty\n" -#~ "\n" -#~ "The Software Products and attached documentation are provided \"as is\", " -#~ "with no warranty, to the \n" -#~ "extent permitted by law.\n" -#~ "MandrakeSoft S.A. will, in no circumstances and to the extent permitted " -#~ "by law, be liable for any special,\n" -#~ "incidental, direct or indirect damages whatsoever (including without " -#~ "limitation damages for loss of \n" -#~ "business, interruption of business, financial loss, legal fees and " -#~ "penalties resulting from a court \n" -#~ "judgment, or any other consequential loss) arising out of the use or " -#~ "inability to use the Software \n" -#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility " -#~ "or occurance of such \n" -#~ "damages.\n" -#~ "\n" -#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN " -#~ "SOME COUNTRIES\n" -#~ "\n" -#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors " -#~ "will, in no circumstances, be \n" -#~ "liable for any special, incidental, direct or indirect damages whatsoever " -#~ "(including without \n" -#~ "limitation damages for loss of business, interruption of business, " -#~ "financial loss, legal fees \n" -#~ "and penalties resulting from a court judgment, or any other consequential " -#~ "loss) arising out \n" -#~ "of the possession and use of software components or arising out of " -#~ "downloading software components \n" -#~ "from one of Mandrake Linux sites which are prohibited or restricted in " -#~ "some countries by local laws.\n" -#~ "This limited liability applies to, but is not restricted to, the strong " -#~ "cryptography components \n" -#~ "included in the Software Products.\n" -#~ "\n" -#~ "\n" -#~ "3. The GPL License and Related Licenses\n" -#~ "\n" -#~ "The Software Products consist of components created by different persons " -#~ "or entities. Most \n" -#~ "of these components are governed under the terms and conditions of the " -#~ "GNU General Public \n" -#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -#~ "licenses allow you to use, \n" -#~ "duplicate, adapt or redistribute the components which they cover. Please " -#~ "read carefully the terms \n" -#~ "and conditions of the license agreement for each component before using " -#~ "any component. Any question \n" -#~ "on a component license should be addressed to the component author and " -#~ "not to MandrakeSoft.\n" -#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL " -#~ "License. Documentation written \n" -#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to " -#~ "the documentation for \n" -#~ "further details.\n" -#~ "\n" -#~ "\n" -#~ "4. Intellectual Property Rights\n" -#~ "\n" -#~ "All rights to the components of the Software Products belong to their " -#~ "respective authors and are \n" -#~ "protected by intellectual property and copyright laws applicable to " -#~ "software programs.\n" -#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -#~ "Products, as a whole or in \n" -#~ "parts, by all means and for all purposes.\n" -#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " -#~ "MandrakeSoft S.A. \n" -#~ "\n" -#~ "\n" -#~ "5. Governing Laws \n" -#~ "\n" -#~ "If any portion of this agreement is held void, illegal or inapplicable by " -#~ "a court judgment, this \n" -#~ "portion is excluded from this contract. You remain bound by the other " -#~ "applicable sections of the \n" -#~ "agreement.\n" -#~ "The terms and conditions of this License are governed by the Laws of " -#~ "France.\n" -#~ "All disputes on the terms of this license will preferably be settled out " -#~ "of court. As a last \n" -#~ "resort, the dispute will be referred to the appropriate Courts of Law of " -#~ "Paris - France.\n" -#~ "For any question on this document, please contact MandrakeSoft S.A. \n" -#~ msgstr "" -#~ "Introduction\n" -#~ "\n" -#~ "The operating system and the different components available in the Linux-" -#~ "Mandrake distribution \n" -#~ "shall be called the \"Software Products\" hereafter. The Software " -#~ "Products include, but are not \n" -#~ "restricted to, the set of programs, methods, rules and documentation " -#~ "related to the operating \n" -#~ "system and the different components of the Linux-Mandrake distribution.\n" -#~ "\n" -#~ "\n" -#~ "1. License Agreement\n" -#~ "\n" -#~ "Please read this document carefully. This document is a license agreement " -#~ "between you and \n" -#~ "MandrakeSoft S.A. which applies to the Software Products.\n" -#~ "By installing, duplicating or using the Software Products in any manner, " -#~ "you explicitly \n" -#~ "accept and fully agree to conform to the terms and conditions of this " -#~ "License. \n" -#~ "If you disagree with any portion of the License, you are not allowed to " -#~ "install, duplicate or use \n" -#~ "the Software Products. \n" -#~ "Any attempt to install, duplicate or use the Software Products in a " -#~ "manner which does not comply \n" -#~ "with the terms and conditions of this License is void and will terminate " -#~ "your rights under this \n" -#~ "License. Upon termination of the License, you must immediately destroy " -#~ "all copies of the \n" -#~ "Software Products.\n" -#~ "\n" -#~ "\n" -#~ "2. Limited Warranty\n" -#~ "\n" -#~ "The Software Products and attached documentation are provided \"as is\", " -#~ "with no warranty, to the \n" -#~ "extent permitted by law.\n" -#~ "MandrakeSoft S.A. will, in no circumstances and to the extent permitted " -#~ "by law, be liable for any special,\n" -#~ "incidental, direct or indirect damages whatsoever (including without " -#~ "limitation damages for loss of \n" -#~ "business, interruption of business, financial loss, legal fees and " -#~ "penalties resulting from a court \n" -#~ "judgment, or any other consequential loss) arising out of the use or " -#~ "inability to use the Software \n" -#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility " -#~ "or occurance of such \n" -#~ "damages.\n" -#~ "\n" -#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN " -#~ "SOME COUNTRIES\n" -#~ "\n" -#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors " -#~ "will, in no circumstances, be \n" -#~ "liable for any special, incidental, direct or indirect damages whatsoever " -#~ "(including without \n" -#~ "limitation damages for loss of business, interruption of business, " -#~ "financial loss, legal fees \n" -#~ "and penalties resulting from a court judgment, or any other consequential " -#~ "loss) arising out \n" -#~ "of the possession and use of software components or arising out of " -#~ "downloading software components \n" -#~ "from one of Linux-Mandrake sites which are prohibited or restricted in " -#~ "some countries by local laws.\n" -#~ "This limited liability applies to, but is not restricted to, the strong " -#~ "cryptography components \n" -#~ "included in the Software Products.\n" -#~ "\n" -#~ "\n" -#~ "3. The GPL License and Related Licenses\n" -#~ "\n" -#~ "The Software Products consist of components created by different persons " -#~ "or entities. Most \n" -#~ "of these components are governed under the terms and conditions of the " -#~ "GNU General Public \n" -#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -#~ "licenses allow you to use, \n" -#~ "duplicate, adapt or redistribute the components which they cover. Please " -#~ "read carefully the terms \n" -#~ "and conditions of the license agreement for each component before using " -#~ "any component. Any question \n" -#~ "on a component license should be addressed to the component author and " -#~ "not to MandrakeSoft.\n" -#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL " -#~ "License. Documentation written \n" -#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to " -#~ "the documentation for \n" -#~ "further details.\n" -#~ "\n" -#~ "\n" -#~ "4. Intellectual Property Rights\n" -#~ "\n" -#~ "All rights to the components of the Software Products belong to their " -#~ "respective authors and are \n" -#~ "protected by intellectual property and copyright laws applicable to " -#~ "software programs.\n" -#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -#~ "Products, as a whole or in \n" -#~ "parts, by all means and for all purposes.\n" -#~ "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of " -#~ "MandrakeSoft S.A. \n" -#~ "\n" -#~ "\n" -#~ "5. Governing Laws \n" -#~ "\n" -#~ "If any portion of this agreement is held void, illegal or inapplicable by " -#~ "a court judgment, this \n" -#~ "portion is excluded from this contract. You remain bound by the other " -#~ "applicable sections of the \n" -#~ "agreement.\n" -#~ "The terms and conditions of this License are governed by the Laws of " -#~ "France.\n" -#~ "All disputes on the terms of this license will preferably be settled out " -#~ "of court. As a last \n" -#~ "resort, the dispute will be referred to the appropriate Courts of Law of " -#~ "Paris - France.\n" -#~ "For any question on this document, please contact MandrakeSoft S.A. \n" - -#~ msgid "ECI Hi-Focus" -#~ msgstr "ECI Hi-Focus" - -#~ msgid "Proxy should be ftp://..." -#~ msgstr "Proxy biasanya ftp://..." - -#~ msgid "quit" -#~ msgstr "keluar" - -#~ msgid "" -#~ "The first time you try the X configuration, you may not be very " -#~ "satisfied\n" -#~ "with its display (screen is too small, shifted left or right...). Hence,\n" -#~ "even if X starts up correctly, DrakX then asks you if the configuration\n" -#~ "suits you. It will also propose to change it by displaying a list of " -#~ "valid\n" -#~ "modes it could find, asking you to select one.\n" -#~ "\n" -#~ "As a last resort, if you still cannot get X to work, choose \"Change\n" -#~ "graphics card\", select \"Unlisted card\", and when prompted on which\n" -#~ "server, choose \"FBDev\". This is a failsafe option which works with any\n" -#~ "modern graphics card. Then choose \"Test again\" to be sure." -#~ msgstr "" -#~ "Pertama kali mencoba konfigurasi X, Anda mungkin tak puas dg tampilannya\n" -#~ "(layar terlalu kecil, tergeser ke kiri/kanan...). Jadi walau X jalan " -#~ "dengan\n" -#~ "baik, DrakX akan bertanya apakah konfigurasi ini memuaskan. Mode valid " -#~ "yang\n" -#~ "ditemukan juga akan disajikan untuk dipilih.\n" -#~ "\n" -#~ "Jika Anda tetap gagal menjalankan X, pilih \"Ubah kartu grafis\", lalu\n" -#~ "\"Kartu tak terdaftar\", dan saat ditanya server apa yg Anda inginkan,\n" -#~ "pilih \"FBDev\". Ini adalah opsi failsafe yg jalan di kartu grafis " -#~ "modern.\n" -#~ "Lalu pilih \"Tes lagi\" agar yakin." - -#~ msgid "Internet and Messaging" -#~ msgstr "Internet dan Pesan" - -#~ msgid "Multimedia and Graphics" -#~ msgstr "Multimedia dan Grafik" - -#~ msgid "" -#~ "Mandrake Linux 8.2 provides 11 different graphical desktop environments " -#~ "and window managers to choose from including GNOME 1.4, KDE 2.2.2, Window " -#~ "Maker 0.8, and the rest" -#~ msgstr "" -#~ "Mandrake Linux 8.2 menyediakan 11 lingkungan desktop grafis dan manajer " -#~ "window termasuk GNOME 1.4, KDE 2.2.2, Window Maker 0.8, dan lain-lain" - -#~ msgid "Server Software" -#~ msgstr "Piranti Lunak Server" - -#~ msgid "MandrakeCampus" -#~ msgstr "KampusMandrake" - -#~ msgid "" -#~ "Would you like to learn Linux simply, quickly, and for free? MandrakeSoft " -#~ "provides free Linux training, as well as a way to test your progress, at " -#~ "MandrakeCampus -- our online training center" -#~ msgstr "" -#~ "Inginkah Anda belajar Linux secara mudah, cepat dan gratis? MandrakeSoft " -#~ "menyediakan training Linux gratis, beserta cara mentes kemajuan Anda, di " -#~ "KampusMandrake -- pusat training online kami" - -#~ msgid "" -#~ "Quality support from the Linux Community, and from MandrakeSoft, is just " -#~ "around the corner. And if you're already a Linux veteran, become an " -#~ "\"Expert\" and share your knowledge at our support website" -#~ msgstr "" -#~ "Support kualitas dari Komunitas Linux, dan dari MandrakeSoft, ada di " -#~ "sekitar pojok. Jika Anda veteran Linux, jadilah \"Ahli\" dan bagilah " -#~ "pengetahuan Anda di situs web support kami" - -#~ msgid "MandrakeConsulting" -#~ msgstr "KonsultasiMandrake" - -#~ msgid "" -#~ "For all of your IT projects, our consultants are ready to analyze your " -#~ "requirements and offer a customized solution. Benefit from MandrakeSoft's " -#~ "vast experience as a Linux producer to provide a true IT alternative for " -#~ "your business organization" -#~ msgstr "" -#~ "Untuk semua proyek IT, konsultan kami siap menganalisa kebutuhan Anda dan " -#~ "menyediakan solusi pilihan. Hasil pengalaman total MandrakeSoft sebagai " -#~ "produser Linux menyediakan Teknologi Informasi sesungguhnya untuk " -#~ "organisasi bisnis Anda" - -#~ msgid "MandrakeStore" -#~ msgstr "TokoMandrake" - -#~ msgid "" -#~ "For more information on MandrakeSoft's Professional Services and " -#~ "commercial offerings, please see the following web page:" -#~ msgstr "" -#~ "Untuk info lebih lanjut tentang Servis Profesional MandrakeSoft dan " -#~ "sajian komersial, lihat halaman web berikut:" - -#~ msgid "LBA (doesn't work on old BIOSes)" -#~ msgstr "LBA (tak bisa dipakai pada BIOS kuno)" - -#~ msgid "You don't have any partitions!" -#~ msgstr "Anda tak punya partisi!" - -#~ msgid "" -#~ "DiskDrake failed to read correctly the partition table.\n" -#~ "Continue at your own risk!" -#~ msgstr "" -#~ "DiskDrake gagal membaca tabel partisi Anda.\n" -#~ "Lanjutkan tapi resiko tanggung sendiri!" - -#~ msgid "" -#~ "I can't read your partition table, it's too corrupted for me :(\n" -#~ "I'll try to go on blanking bad partitions" -#~ msgstr "" -#~ "Tabel partisi rusak tak terbaca :(\n" -#~ "Partisi buruk akan dicoba dihapus" - -#~ msgid "" -#~ "Please Build backup before to restore it...\n" -#~ " or verify that your path to save is correct." -#~ msgstr "" -#~ "Buatlah backup sebelum menyimpan ulang...\n" -#~ " atau pastikan path utk menyimpan sudah benar." - -#~ msgid "Firewalling Configuration" -#~ msgstr "konfigurasi firewall" - -#~ msgid "Firewalling configuration" -#~ msgstr "konfigurasi firewall" - -#~ msgid "" -#~ "Firewalling\n" -#~ "\n" -#~ "You already have set up a firewall.\n" -#~ "Click on Configure to change or remove the firewall" -#~ msgstr "" -#~ "Firewall\n" -#~ "\n" -#~ "Anda sudah ada firewall.\n" -#~ "Silakan tekan Konfigurasikan untuk mengganti atau menghapus firewall" - -#~ msgid "" -#~ "Firewalling\n" -#~ "\n" -#~ "Click on Configure to set up a standard firewall" -#~ msgstr "" -#~ "Firewall\n" -#~ "\n" -#~ "Silakan tekan Konfigurasikan untuk mensetup firewall standar" - -#~ msgid "" -#~ "We'll now ask you questions about which services you'd like to allow\n" -#~ "the Internet to connect to. Please think carefully about these\n" -#~ "questions, as your computer's security is important.\n" -#~ "\n" -#~ "Please, if you're not currently using one of these services, firewall\n" -#~ "it off. You can change this configuration anytime you like by\n" -#~ "re-running this application!" -#~ msgstr "" -#~ "Sekarang saya akan tanyakan layanan mana saja yang hendak Anda bolehkan\n" -#~ "untuk dapat diakses dari Internet. Silakan fikirkan dulu masak-masak " -#~ "akan\n" -#~ "hal ini, karena keamanan komputer Anda sangat penting kan.\n" -#~ "\n" -#~ "Ayo, bila Anda tidak pakai layanan-layanan ini, matikan saja lewat " -#~ "firewall.\n" -#~ "Anda bisa ubah konfigurasikan lagi kapan-kapan dengan menjalankan\n" -#~ "aplikasi ini lagi nantinya." - -#~ msgid "" -#~ "Are you running a web server on this machine that you need the whole\n" -#~ "Internet to see? If you are running a webserver that only needs to be\n" -#~ "accessed by this machine, you can safely answer NO here.\n" -#~ "\n" -#~ msgstr "" -#~ "Apakah Anda ingin webserver Anda juga dapat diakses dari Internet ??\n" -#~ "Bila Anda ingin webserver Anda HANYA ingin diakses dari KOMPUTER INI " -#~ "SAJA\n" -#~ "maka jawab saja TIDAK di sini.\n" -#~ "\n" - -#~ msgid "" -#~ "Are you running a name server on this machine? If you didn't set one\n" -#~ "up to give away IP and zone information to the whole Internet, please\n" -#~ "answer no.\n" -#~ "\n" -#~ msgstr "" -#~ "Apakah Anda menjalankan Name server di komputer ini? Bila Anda\n" -#~ "tidak menjalankan nameserver untuk menjawab informasi IP dan zone untuk " -#~ "Internet\n" -#~ "silakan jawab TIDAK.\n" -#~ "\n" - -#~ msgid "" -#~ "Do you want to allow incoming Secure Shell (ssh) connections? This\n" -#~ "is a telnet-replacement that you might use to login. If you're using\n" -#~ "telnet now, you should definitely switch to ssh. telnet is not\n" -#~ "encrypted -- so some attackers can steal your password if you use\n" -#~ "it. ssh is encrypted and doesn't allow for this eavesdropping." -#~ msgstr "" -#~ "Apakah Anda ingin membuka koneksi Secure Shell (ssh) ?\n" -#~ "SSH adalah pengganti telnet yang mungkin hendak Anda gunakan.\n" -#~ "Bila Anda hanya menggunakan telnet sekarang, silakan ganti ke ssh.\n" -#~ "telnet tidak dienkripsi loh -- jadi orang lain bisa mencuri katasandi " -#~ "Anda\n" -#~ "saat telnet. SSH dienkripsi dan tidak bisa disadap." - -#~ msgid "" -#~ "Do you want to allow incoming telnet connections?\n" -#~ "This is horribly unsafe, as we explained in the previous screen. We\n" -#~ "strongly recommend answering No here and using ssh in place of\n" -#~ "telnet.\n" -#~ msgstr "" -#~ "Apakah Anda ingin membuka koneksi telnet?\n" -#~ "Ini sangat tidak aman sebagaimana dijelaskan pada layar sebelumnya.\n" -#~ "Sebaiknya jawab TIDAK dan gunakan SSH.\n" - -#~ msgid "" -#~ "Are you running an FTP server here that you need accessible to the\n" -#~ "Internet? If you are, we strongly recommend that you only use it for\n" -#~ "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" -#~ "attackers, since FTP also uses no encryption for transferring passwords.\n" -#~ msgstr "" -#~ "Apakah Anda hendak membuka koneksi FTP yang ingin diakses dari Internet?\n" -#~ "Bila ya, silakan gunakan saja untuk transfer anonimous. Katasandi yang " -#~ "dikirimkan\n" -#~ "oleh FTP bisa dicuri oleh cracker, karena FTP tidak diacak saat " -#~ "pertukaran katasandi terjadi.\n" - -#~ msgid "" -#~ "Are you running a mail server here? If you're sending you \n" -#~ "messages through pine, mutt or any other text-based mail client,\n" -#~ "you probably are. Otherwise, you should firewall this off.\n" -#~ "\n" -#~ msgstr "" -#~ "Apakah Anda menjalankan server mail ? Bila Anda mengirim email dengan\n" -#~ "menggunakan pine, mutt, atau klien mail teks, maka sebaiknya iya.\n" -#~ "Selainnya, matikan saja.\n" -#~ "\n" - -#~ msgid "" -#~ "Are you running a POP or IMAP server here? This would\n" -#~ "be used to host non-web-based mail accounts for people via \n" -#~ "this machine.\n" -#~ "\n" -#~ msgstr "" -#~ "Apakah Anda menjalankan server POP atau IMAP ?\n" -#~ "Fasilitas ini bisa digunakan untuk menampung account email non web untuk\n" -#~ "umum.\n" -#~ "\n" - -#~ msgid "" -#~ "You appear to be running a 2.2 kernel. If your network IP\n" -#~ "is automatically set by a computer in your home or office \n" -#~ "(dynamically assigned), we need to allow for this. Is\n" -#~ "this the case?\n" -#~ msgstr "" -#~ "Kelihatannya Anda memakai kernel 2.2. Bila IP jaringan Anda diset " -#~ "sendiri\n" -#~ "oleh komputer di kantor atau rumah (secara dinamis) maka kita harus " -#~ "jawab\n" -#~ "YA di sini. Benarkah demikian?\n" - -#~ msgid "" -#~ "Is your computer getting time syncronized to another computer?\n" -#~ "Mostly, this is used by medium-large Unix/Linux organizations\n" -#~ "to synchronize time for logging and such. If you're not part\n" -#~ "of a larger office and haven't heard of this, you probably \n" -#~ "aren't." -#~ msgstr "" -#~ "Apakah komputer Anda mendapatkan informasi jam dari komputer lain?\n" -#~ "Biasanya, fasilitas ini digunakan oleh organisasi sedang/besar Unix/" -#~ "Linux\n" -#~ "untuk sinkronisasi waktu untuk logging dan sebagainya. Bila Anda\n" -#~ "tidak tergabung dari kantor yang besar atau belum pernah dengar ini\n" -#~ "sebelumnya, jawab TIDAK." - -#~ msgid "" -#~ "Configuration complete. May we write these changes to disk?\n" -#~ "\n" -#~ "\n" -#~ "\n" -#~ msgstr "" -#~ "Konfigurasi tamat. Simpan perubahan ini ke disk?\n" -#~ "\n" -#~ "\n" -#~ "\n" - -#~ msgid "Can't open %s for writing: %s\n" -#~ msgstr "Tak dapat membuka file %s untuk ditulisi: %s\n" - -#~ msgid "No I don't need DHCP" -#~ msgstr "Tidak, tak perlu DHCP" - -#~ msgid "Yes I need DHCP" -#~ msgstr "Ya, perlu DHCP" - -#~ msgid "No I don't need NTP" -#~ msgstr "Tidak, tak perlu NTP" - -#~ msgid "Yes I need NTP" -#~ msgstr "Ya, perlu NTP" - -#~ msgid "Don't Save" -#~ msgstr "Jangan Simpan" - -#~ msgid "Save & Quit" -#~ msgstr "Simpan & Keluar" - -#~ msgid "Firewall Configuration Wizard" -#~ msgstr "Dukun Konfigurasi Firewall" - -#~ msgid "No (firewall this off from the internet)" -#~ msgstr "Tidak (lindungi dari internet)" - -#~ msgid "Yes (allow this through the firewall)" -#~ msgstr "Ya (izinkan ini melewati firewall)" - -#~ msgid "Please Wait... Verifying installed packages" -#~ msgstr "Tunggu, paket terinstal sedang diverifikasi" - -#~ msgid "" -#~ "Failure installing the needed packages: %s and Bastille.\n" -#~ " Try to install them manually." -#~ msgstr "" -#~ "Gagal menginstal paket kebutuhan: %s dan Bastille.\n" -#~ " Coba instal secara manual." - -#~ msgid "" -#~ "This level is to be used with care. It makes your system more easy to " -#~ "use,\n" -#~ " but very sensitive: it must not be used for a machine " -#~ "connected to others\n" -#~ " or to the Internet. There is no password access." -#~ msgstr "" -#~ "Level ini harus digunakan dg hati-hati. Level ini membuat sistem Anda " -#~ "mudah\n" -#~ " digunakan, tapi amat sensitif: tak boleh digunakan untuk\n" -#~ " mesin yang terhubung dg mesin lain atau ke Internet. " -#~ "Tidak\n" -#~ " ada akses katasandi." - -#~ msgid "" -#~ "With this security level, the use of this system as a server becomes " -#~ "possible.\n" -#~ " The security is now high enough to use the system as a " -#~ "server which can accept\n" -#~ " connections from many clients. Note: if your machine is " -#~ "only a client on the Internet, you should choose a lower level." -#~ msgstr "" -#~ "Dengan level sekuriti ini, sistem dapat digunakan sebagai server.\n" -#~ " Cukup aman utk melayani koneksi banyak klien. Jika mesin " -#~ "Anda\n" -#~ " hanya berfungsi sebagai klien, pilihlah level lebih " -#~ "rendah." - -#~ msgid "Basic Options" -#~ msgstr "Opsi Dasar" - -#~ msgid "Security Checks" -#~ msgstr "Cek Keamanan" - -#~ msgid "Data list to include on CDROM." -#~ msgstr "Daftar data utk dimasukkan ke CDROM." - -#~ msgid "Please choose your CD space" -#~ msgstr "Pilih ruang CD Anda" - -#~ msgid "Please enter the cd writer speed" -#~ msgstr "Masukkan kecepatan penulis cd" - -#~ msgid "Please check if you want to erase your CDRW before" -#~ msgstr "Cek apakah Anda ingin menghapus CDRW sebelum" - -#~ msgid "Please enter your CD Writer device name (ex: 0,1,0)" -#~ msgstr "Masukkan nama alat Penulis CD (mis: 0,1,0)" - -#~ msgid "Please check if you want to include install boot on your CD." -#~ msgstr "Cek jika Anda ingin memasukkan boot instalasi ke CD" - -#~ msgid "Url should begin with 'ftp:'" -#~ msgstr "Url harus berformat 'ftp:'" - -#~ msgid "" -#~ "Please check if you want to include\n" -#~ " install boot on your CD." -#~ msgstr "" -#~ "Cek jika Anda ingin memasukkan\n" -#~ " boot instalasi di CD Anda." - -#~ msgid "Windows PDC" -#~ msgstr "Mindows PDC" - -#~ msgid "Authentication Windows PDC" -#~ msgstr "Otentikasi Mindows PDC" - -#~ msgid "PDC Server Name" -#~ msgstr "Nama Server PDC" - -#~ msgid "" -#~ "For this to work for a W2K PDC, you will probably need to have the admin " -#~ "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" -#~ "add and reboot the server" -#~ msgstr "" -#~ "Agar dapat dijalankan di PDC W2K, Anda perlu minta admin melakukan: C:" -#~ "\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone / add " -#~ "dan reboot server" - -#~ msgid "Tamil" -#~ msgstr "Tamil" - -#~ msgid "on LPD server \"%s\", printer \"%s\"" -#~ msgstr "di server LPD \"%s\", printer \"%s\"" - -#~ msgid "on Windows server \"%s\", share \"%s\"" -#~ msgstr "di server Mindows \"%s\", share \"%s\"" - -#~ msgid "on Novell server \"%s\", printer \"%s\"" -#~ msgstr "di server Novell \"%s\", printer \"%s\"" - -#~ msgid "" -#~ "\n" -#~ "Welcome to the Printer Setup Wizard\n" -#~ "\n" -#~ "This wizard will help you to install your printer(s) connected to this " -#~ "computer.\n" -#~ "\n" -#~ "Please plug in your printer(s) on this computer and turn it/them on. " -#~ "Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " -#~ "want to set up your printer(s) now.\n" -#~ "\n" -#~ "Note that some computers can crash during the printer auto-detection, " -#~ "turn off \"Auto-detect printers\" to do a printer installation without " -#~ "auto-detection. Use the \"Expert Mode\" of printerdrake when you want to " -#~ "set up printing on a remote printer if printerdrake does not list it " -#~ "automatically." -#~ msgstr "" -#~ "\n" -#~ "Selamat Datang di Dukun Setup Printer\n" -#~ "\n" -#~ "Dukun ini membantu Anda menginstal printer terhubung dengan komputer " -#~ "ini.\n" -#~ "\n" -#~ "Hubungkan printer Anda ke komputer ini dan nyalakan. Klik \"Lanjut\" jika " -#~ "siap, atau \"Batal\" bila Anda tak ingin men-set up printer sekarang.\n" -#~ "\n" -#~ "Ingat bahwa beberapa komputer bisa crash saat deteksi otomatis printer, " -#~ "matikan \"Deteksi otomatis printer\" utk instalasi printer tanpa deteksi " -#~ "otomatis. Pakailah \"Mode Ahli\" printerdrake bila Anda ingin set up " -#~ "pencetakan di printer remote jika printerdrake tak otomatis " -#~ "menampilkannya." - -#~ msgid "Auto-detect printers" -#~ msgstr "Printer deteksi otomatis" - -#~ msgid "Auto-Detection of Printers" -#~ msgstr "Deteksi Otomatis Printer" - -#~ msgid "" -#~ "Printerdrake is able to auto-detect your locally connected parallel and " -#~ "USB printers for you, but note that on some systems the auto-detection " -#~ "CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do " -#~ "it ON YOUR OWN RISK!\n" -#~ "\n" -#~ "Do you really want to get your printers auto-detected?" -#~ msgstr "" -#~ "Printerdrake dapat mendeteksi otomatis printer paralel dan USB yang " -#~ "terkoneksi lokal, tapi ingat di beberapa sistem deteksi otomatis DAPAT " -#~ "MEMBEKUKAN SISTEM ANDA DAN MEMBUAT SISTEM FILE ANDA RUSAK! Jadi kerjakan " -#~ "ATAS RESIKO ANDA!\n" -#~ "\n" -#~ "Anda ingin deteksi otomatis printer?" - -#~ msgid "Do auto-detection" -#~ msgstr "Lakukan deteksi otomatis" - -#~ msgid "Set up printer manually" -#~ msgstr "Setup printer secara manual" - -#~ msgid "" -#~ "No local printer found!\n" -#~ "\n" -#~ msgstr "" -#~ "Tiada printer lokal ditemukan!\n" -#~ "\n" - -#~ msgid "" -#~ "Network printers can only be installed after the installation. Choose " -#~ "\"Hardware\" and then \"Printer\" in the Mandrake Control Center." -#~ msgstr "" -#~ "Printer network hanya dapat diinstal setelah instalasi ini. Pilih " -#~ "\"Hardware\" lalu \"Printer\" di Pusat Kontrol Mandrake." - -#~ msgid "" -#~ "To install network printers, click \"Cancel\", switch to the \"Expert Mode" -#~ "\", and click \"Add a new printer\" again." -#~ msgstr "" -#~ "Untuk menginstal printer network, klik \"Batal\", pindah ke \"Mode Ahli" -#~ "\", dan klik \"Tambah printer baru\" lagi." - -#~ msgid "" -#~ "Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet " -#~ "1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart or an HP " -#~ "LaserJet 2200?" -#~ msgstr "" -#~ "Apakah printer Anda adalah alat multifungsi dari HP (OfficeJet, PSC, " -#~ "LaserJet 1100/1200/1220/3200/3300 dengan scanner), HP PhotoSmart atau HP " -#~ "LaserJet 2200?" - -#~ msgid "Installing HPOJ package..." -#~ msgstr "Instalasi paket HPOJ..." - -#~ msgid "Checking device and configuring HPOJ..." -#~ msgstr "Sedang mencek alat dan mengkonfigurasi HPOJ ..." - -#~ msgid "Installing SANE packages..." -#~ msgstr "Instalasi paket SANE..." - -#~ msgid "Installing mtools packages..." -#~ msgstr "Instalasi paket mtools..." - -#~ msgid "Scanning on your HP multi-function device" -#~ msgstr "Alat multifungsi HP sedang di-scan" - -#~ msgid "Photo memory card access on your HP multi-function device" -#~ msgstr "Akses kartu memori foto pada alat multifungsi HP Anda" - -#~ msgid "Making printer port available for CUPS..." -#~ msgstr "Membuat port printer tersedia utk CUPS ..." - -#~ msgid "" -#~ "To print to a TCP or socket printer, you need to provide the host name of " -#~ "the printer and optionally the port number. On HP JetDirect servers the " -#~ "port number is usually 9100, on other servers it can vary. See the manual " -#~ "of your hardware." -#~ msgstr "" -#~ "Untuk mencetak ke printer soket, berikan nama host printer (dan nomor " -#~ "portnya). Nomor port server HP JetDirect biasanya 9100, server lain " -#~ "bervariasi. Lihat manual perangkat keras Anda." - -#~ msgid "Printer host name" -#~ msgstr "Nama host printer" - -#~ msgid "Printer host name missing!" -#~ msgstr "Nama host printer hilang!" - -#~ msgid "Control Center" -#~ msgstr "Pusat Kontrol" - -#~ msgid "Choose the tool you want to use" -#~ msgstr "Pilih tool yang hendak digunakan" - -#~ msgid "Mail/SMS alert" -#~ msgstr "Peringatan Mail/SMS" - -#~ msgid "Mail/SMS alert configuration" -#~ msgstr "Konfigurasi peringatan Mail/SMS" - -#~ msgid "" -#~ "Welcome to the mail/SMS configuration utility.\n" -#~ "\n" -#~ "Here, you'll be able to set up the alert system.\n" -#~ msgstr "" -#~ "Selamat datang di konfigurator mail/SMS.\n" -#~ "\n" -#~ "Anda dapat mengeset sistem peringatan.\n" - -#~ msgid "Configure the way the system will alert you" -#~ msgstr "Konfigurasikan cara sistem memperingatkan Anda" - -#~ msgid "no serial_usb found\n" -#~ msgstr "tiada serial_usb\n" - -#~ msgid "fsck failed with exit code %d or signal %d" -#~ msgstr "fsck gagal dg kode keluar %d / sinyal %d" - -#~ msgid "Graphics card identification: %s\n" -#~ msgstr "Identifikasi kartu grafis: %s\n" - -#~ msgid "Choose options for server" -#~ msgstr "Pilih opsi server" - -#~ msgid "Monitor not configured" -#~ msgstr "Monitor tidak dikonfigurasi" - -#~ msgid "Graphics card not configured yet" -#~ msgstr "Kartu grafis belum dikonfigurasi" - -#~ msgid "Resolutions not chosen yet" -#~ msgstr "Resolusi belum ditentukan" - -#~ msgid "" -#~ "\n" -#~ "try to change some parameters" -#~ msgstr "" -#~ "\n" -#~ "coba ubah beberapa parameter" - -#~ msgid "An error occurred:" -#~ msgstr "Ada error:" - -#~ msgid "Leaving in %d seconds" -#~ msgstr "Tinggalkan dalam %d detik" - -#~ msgid "Is this the correct setting?" -#~ msgstr "Setting sudah benar?" - -#~ msgid "An error occurred, try to change some parameters" -#~ msgstr "Ada kesalahan, coba ubah beberapa parameter" - -#~ msgid "XFree86 server: %s" -#~ msgstr "Server XFree86: %s" - -#~ msgid "Show all" -#~ msgstr "Tampilkan seluruhnya" - -#~ msgid "Preparing X-Window configuration" -#~ msgstr "Siap-siap konfigurasikan X " - -#~ msgid "What do you want to do?" -#~ msgstr "Apa yang akan Anda mau?" - -#~ msgid "Change Monitor" -#~ msgstr "Ubah Monitor" - -#~ msgid "Change Graphics card" -#~ msgstr "Ubah kartu grafis" - -#~ msgid "Change Server options" -#~ msgstr "Ubah Parameter Server" - -#~ msgid "Change Resolution" -#~ msgstr "Ubah Resolusi" - -#~ msgid "Show information" -#~ msgstr "Lihat info" - -#~ msgid "Test again" -#~ msgstr "Tes lagi" - -#~ msgid "" -#~ "Description of the fields:\n" -#~ "\n" -#~ "Bus: this is the physical bus on which the device is plugged (eg: PCI, " -#~ "USB, ...)\n" -#~ "\n" -#~ "Bus identification: \n" -#~ "- pci devices : this list the vendor, device, subvendor and subdevice PCI " -#~ "ids\n" -#~ "\n" -#~ "Description: this field describe the device\n" -#~ "\n" -#~ "Location on the bus: \n" -#~ "- pci devices: this gives the PCI slot, device and function of this card\n" -#~ "- eide devices: the device is either a slave or a master device\n" -#~ "- scsi devices: the scsi bus and the scsi device ids\n" -#~ "\n" -#~ "Media class: class of hardware device\n" -#~ "\n" -#~ "Module: the module of the GNU/Linux kernel that handle that device\n" -#~ "\n" -#~ "Vendor: the vendor name of the device\n" -#~ msgstr "" -#~ "Penjelasan Umum:\n" -#~ "\n" -#~ "Bus: bus fisik letak device (mis: PCI, USB, ...)\n" -#~ "\n" -#~ "Identifikasi bus:\n" -#~ "- device pci : ID daftar pembuat, device, sub-pembuat dan subdevice PCI\n" -#~ "\n" -#~ "Penjelasan: penjelasan device\n" -#~ "\n" -#~ "Lokasi bus: \n" -#~ "- device pci : slot dan device PCI, serta fungsi kartu\n" -#~ "- device eide: device adalah slave atau master\n" -#~ "- device scsi: bus scsi dan id device scsi\n" -#~ "\n" -#~ "Kelas media: kelas device hardware\n" -#~ "\n" -#~ "Modul: modul kernel GNU/Linux yang menghandle device tsb\n" -#~ "\n" -#~ "Vendor: nama pembuat device\n" - -#~ msgid "" -#~ "Your HP multi-function device was configured automatically to be able to " -#~ "scan. Now you can scan from the command line with \"ptal-hp %s scan ..." -#~ "\". Scanning via a graphical interface or from the GIMP is not supported " -#~ "yet for your device. More information you will find in the \"/usr/share/" -#~ "doc/hpoj-0.8/ptal-hp-scan.html\" file on your system. If you have an HP " -#~ "LaserJet 1100 or 1200 you can only scan when you have the scanner option " -#~ "installed.\n" -#~ "\n" -#~ "Do not use \"scannerdrake\" for this device!" -#~ msgstr "" -#~ "Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. " -#~ "Kini Anda dapat men-scan dari baris perintah dg \"ptal-hp %s scan ...\". " -#~ "Scan via antarmuka grafis atau GIMP saat ini belum di-support. Info " -#~ "lanjutada di \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Jika Anda " -#~ "punya HP LaserJet 1100 atau 1200 Anda hanya dapat men-scan jika opsi " -#~ "scanner terinstal.\n" -#~ "\n" -#~ "Jangan pakai \"scannerdrake\" utk alat ini!" - -#~ msgid "Use Hard Drive with daemon" -#~ msgstr "Pakai Hard Drive dg daemon" - -#~ msgid "Use FTP with daemon" -#~ msgstr "Pakai FTP dg daemon" - -#~ msgid "Package List to Install" -#~ msgstr "Daftar Paket yang akan diinstal" - -#~ msgid "proftpd" -#~ msgstr "proftpd" - -#~ msgid "sshd" -#~ msgstr "sshd" - -#~ msgid "webmin" -#~ msgstr "webmin" - -#~ msgid "xinetd" -#~ msgstr "xinetd" - -#~ msgid "" -#~ "GNU/Linux is a multiuser system, and this means that each user can have " -#~ "his\n" -#~ "own preferences, his own files and so on. You can read the ``User " -#~ "Guide''\n" -#~ "to learn more. But unlike \"root\", which is the administrator, the " -#~ "users\n" -#~ "you will add here will not be entitled to change anything except their " -#~ "own\n" -#~ "files and their own configuration. You will have to create at least one\n" -#~ "regular user for yourself. That account is where you should log in for\n" -#~ "routine use. Although it is very practical to log in as \"root\" " -#~ "everyday,\n" -#~ "it may also be very dangerous! The slightest mistake could mean that " -#~ "your\n" -#~ "system would not work any more. If you make a serious mistake as a " -#~ "regular\n" -#~ "user, you may only lose some information, but not the entire system.\n" -#~ "\n" -#~ "First, you have to enter your real name. This is not mandatory, of " -#~ "course\n" -#~ "as you can actually enter whatever you want. DrakX will then take the " -#~ "first\n" -#~ "word you have entered in the box and will bring it over to the \"User\n" -#~ "name\". This is the name this particular user will use to log onto the\n" -#~ "system. You can change it. You then have to enter a password here. A\n" -#~ "non-privileged (regular) user's password is not as crucial as \"root\"' " -#~ "one\n" -#~ "from a security point of view, but that is no reason to neglect it: " -#~ "after\n" -#~ "all, your files are at risk.\n" -#~ "\n" -#~ "If you click on \"Accept user\", you can then add as many as you want. " -#~ "Add\n" -#~ "a user for each one of your friends: your father or your sister, for\n" -#~ "example. When you finish adding all the users you want, select \"Done\".\n" -#~ "\n" -#~ "Clicking the \"Advanced\" button allows you to change the default \"shell" -#~ "\"\n" -#~ "for that user (bash by default)." -#~ msgstr "" -#~ "GNU/Linux adalah sistem multiuser, artinya tiap user bisa punya " -#~ "kesukaan,\n" -#~ "file dll sendiri. Anda bisa membaca ``User Guide'' utk belajar lebih " -#~ "dalam.\n" -#~ "Tapi tak seperti \"root\", sang administrator, user di sini tak berhak\n" -#~ "mengubah apapun kecuali konfigurasi dan file mereka sendiri. Anda harus\n" -#~ "membuat setidaknya satu user reguler utk Anda sendiri. Account ini Anda\n" -#~ "pakai utk rutinitas. Meski Anda dapat login sbg \"root\" tiap hari, tapi\n" -#~ "itu amat berbahaya! Kesalahan terkecil dapat menyebabkan sistem Anda tak\n" -#~ "bekerja selamanya. Meski Anda melakukan kesalahan serius sbg user " -#~ "normal,\n" -#~ "Anda hanya akan kehilangan sebagian informasi, tidak seluruh sistem.\n" -#~ "\n" -#~ "Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda " -#~ "dapat\n" -#~ "mengisinya sesuka Anda. DrakX akan mengambil kata pertama yg anda " -#~ "masukkan\n" -#~ "di kotak sbg \"Nama user\". Ini adalah nama user yg dipakai utk login ke\n" -#~ "sistem. Anda bisa mengubahnya. Lalu Anda harus mengisi katasandi. " -#~ "Katasandi\n" -#~ "user non-privileged (reguler) tak sepenting katasandi \"root\" dari segi\n" -#~ "keamanan, tapi tak ada alasan utk mengabaikannya - file Anda bisa " -#~ "beresiko.\n" -#~ "\n" -#~ "Klik \"Buat user\", selanjutnya Anda dapat menambahkan user sebanyak " -#~ "Anda\n" -#~ "mau. Misalnya, tambahkan user utk teman, ayah, atau saudara Anda. Bila " -#~ "Anda\n" -#~ "selesai menambahkan semua user, pilih \"Selesai\".\n" -#~ "\n" -#~ "Klik \"Tambahan\" memungkinkan Anda mengubah \"shell\" standar utk user\n" -#~ "terkait (standar: bash)." - -#~ msgid "" -#~ "It is now time to specify which programs you wish to install on your\n" -#~ "system. There are thousands of packages available for Mandrake Linux, " -#~ "and\n" -#~ "you are not supposed to know them all by heart.\n" -#~ "\n" -#~ "If you are performing a standard installation from a CD-ROM, you will " -#~ "first\n" -#~ "be asked to specify the CDs you currently have (in Expert mode only). " -#~ "Check\n" -#~ "the CD labels and highlight the boxes corresponding to the CDs you have\n" -#~ "available for installation. Click \"OK\" when you are ready to continue.\n" -#~ "\n" -#~ "Packages are sorted in groups corresponding to a particular use of your\n" -#~ "machine. The groups themselves are sorted into four sections:\n" -#~ "\n" -#~ " * \"Workstation\": if you plan to use your machine as a workstation, " -#~ "select\n" -#~ "one or more of the corresponding groups;\n" -#~ "\n" -#~ " * \"Development\": if your machine is to be used for programming, " -#~ "choose\n" -#~ "the desired group(s);\n" -#~ "\n" -#~ " * \"Server\": if your machine is intended to be a server, you will be " -#~ "able\n" -#~ "to select which of the most common services you wish to install on your\n" -#~ "machine;\n" -#~ "\n" -#~ " * \"Graphical Environment\": finally, this is where you will choose " -#~ "your\n" -#~ "preferred graphical environment. At least one must be selected if you " -#~ "want\n" -#~ "to have a graphical workstation!\n" -#~ "\n" -#~ "Moving the mouse cursor over a group name will display a short " -#~ "explanatory\n" -#~ "text about that group. If you deselect all groups when performing a " -#~ "regular\n" -#~ "installation (by opposition to an upgrade), a dialog will pop up " -#~ "proposing\n" -#~ "different options for a minimal installation:\n" -#~ "\n" -#~ " * \"With X\": install the fewer packages possible to have a working\n" -#~ "graphical desktop;\n" -#~ "\n" -#~ " * \"With basic documentation\": installs the base system plus basic\n" -#~ "utilities and their documentation. This installation is suitable for\n" -#~ "setting up a server;\n" -#~ "\n" -#~ " * \"Truly minimal install\": will install the strict minimum necessary " -#~ "to\n" -#~ "get a working Linux system, in command line only. This installation is\n" -#~ "about 65Mb large.\n" -#~ "\n" -#~ "You can check the \"Individual package selection\" box, which is useful " -#~ "if\n" -#~ "you are familiar with the packages being offered or if you want to have\n" -#~ "total control over what will be installed.\n" -#~ "\n" -#~ "If you started the installation in \"Upgrade\" mode, you can unselect " -#~ "all\n" -#~ "groups to avoid installing any new package. This is useful for repairing " -#~ "or\n" -#~ "updating an existing system." -#~ msgstr "" -#~ "Kini kita tentukan program yg akan diinstal di sistem Anda. Ribuan paket\n" -#~ "tersedia di Mandrake Linux, Anda tak perlu mengenal semuanya.\n" -#~ "\n" -#~ "Jika Anda menjalankan instalasi standar dari CDROM, Anda akan diminta\n" -#~ "menentukan CD yg Anda punya (hanya pd mode Ahli). Cek label CD dan\n" -#~ "tandai kotak yg sesuai dg CD yg Anda miliki utk instalasi. Klik \"OK\" " -#~ "jika\n" -#~ "Anda siap melanjutkan.\n" -#~ "\n" -#~ "Paket disortir menurut grup sesuai kegunaan mesin Anda.\n" -#~ "Grup diurutkan ke dalam empat bagian:\n" -#~ "\n" -#~ " * \"Workstation\": jika Anda ingin menggunakan mesin Anda sbg " -#~ "workstation, pilih\n" -#~ "satu/lebih grup yg sesuai.\n" -#~ "\n" -#~ " * \"Development\": jika mesin akan digunakan utk pemrograman, pilih " -#~ "grup\n" -#~ "yg diinginkan.\n" -#~ "\n" -#~ " * \"Server\": jika mesin diinginkan menjadi server, Anda dapat\n" -#~ "memilih servis paling umum yg akan diinstal.\n" -#~ "\n" -#~ " * \"Lingkungan Grafis\": akhirnya, di sini Anda memilih lingkungan\n" -#~ "grafis. Minimal Anda harus pilih satu jika ingin punya workstation " -#~ "grafis!\n" -#~ "\n" -#~ "Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama " -#~ "grup.\n" -#~ "Jika Anda tak memilih satu grup pun saat melakukan instalasi normal " -#~ "(bukan\n" -#~ "upgrade) popup dialog akan muncul dengan menu instalasi minimal:\n" -#~ "\n" -#~ " * \"Dengan X\" Instal paket minimal yang memungkinkan kerja dengan " -#~ "desktop\n" -#~ "grafis;\n" -#~ "\n" -#~ " * \"Dengan dokumentasi dasar\" Instal sistem plus peralatan dasar dan\n" -#~ "dokumentasinya. Instalasi ini cocok untuk setup server.\n" -#~ "\n" -#~ " * \"Instalasi minimal sungguh\" Hanya instal kebutuhan minimum sistem,\n" -#~ "dalam baris perintah saja. Butuh sekitar 65Mb.\n" -#~ "\n" -#~ "Anda dapat memilih \"Pilih paket sendiri\", berguna jika Anda tahu baik\n" -#~ "paket yg disediakan atau ingin mengontrol instalasi secara total.\n" -#~ "\n" -#~ "Jika Anda memulai instalasi dg mode \"Upgrade\", Anda dapat melepas " -#~ "seleksi\n" -#~ "semua group utk menghindari instalasi paket baru. Ini berguna utk " -#~ "reparasi\n" -#~ "atau update sistem yg ada." - -#~ msgid "" -#~ "The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it " -#~ "by\n" -#~ "booting from the CD-ROM, press the >>F1<< key at boot and type " -#~ ">>rescue<<\n" -#~ "at the prompt. But in case your computer cannot boot from the CD-ROM, " -#~ "you\n" -#~ "should come back to this step for help in at least two situations:\n" -#~ "\n" -#~ " * when installing the bootloader, DrakX will rewrite the boot sector " -#~ "(MBR)\n" -#~ "of your main disk (unless you are using another boot manager), to allow " -#~ "you\n" -#~ "to start up with either Windows or GNU/Linux (assuming you have Windows " -#~ "in\n" -#~ "your system). If you need to reinstall Windows, the Microsoft install\n" -#~ "process will rewrite the boot sector, and then you will not be able to\n" -#~ "start GNU/Linux!\n" -#~ "\n" -#~ " * if a problem arises and you cannot start up GNU/Linux from the hard " -#~ "disk,\n" -#~ "this floppy disk will be the only means of starting up GNU/Linux. It\n" -#~ "contains a fair number of system tools for restoring a system, which has\n" -#~ "crashed due to a power failure, an unfortunate typing error, a typo in a\n" -#~ "password, or any other reason.\n" -#~ "\n" -#~ "When you click on this step, you will be asked to enter a disk inside " -#~ "the\n" -#~ "drive. The floppy disk you will insert must be empty or contain data " -#~ "which\n" -#~ "you do not need. You will not have to format it since DrakX will rewrite\n" -#~ "the whole disk." -#~ msgstr "" -#~ "CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg\n" -#~ "mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi " -#~ "jika\n" -#~ "komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini " -#~ "untuk\n" -#~ "pertolongan dalam setidaknya 2 situasi:\n" -#~ "\n" -#~ " * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)\n" -#~ "disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga " -#~ "Anda\n" -#~ "dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di " -#~ "sistem\n" -#~ "Anda). Jika Anda menginstal Mindows lagi, proses instal microsoft akan\n" -#~ "menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!\n" -#~ "\n" -#~ " * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari " -#~ "hard\n" -#~ "disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. " -#~ "Ini\n" -#~ "berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan " -#~ "power,\n" -#~ "salah ketik, alpa kata sandi, dan lain-lain.\n" -#~ "\n" -#~ "Bila step ini diklik, Anda akan diminta memasukkan disket ke drive. " -#~ "Disket\n" -#~ "harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat " -#~ "sebab\n" -#~ "DrakX akan menulis ulang seluruh disket." - -#~ msgid "" -#~ "At this point, you need to choose where you want to install the Mandrake\n" -#~ "Linux operating system on your hard drive. If your hard drive is empty " -#~ "or\n" -#~ "if an existing operating system is using all the available space, you " -#~ "will\n" -#~ "need to partition it. Basically, partitioning a hard drive consists of\n" -#~ "logically dividing it to create space to install your new Mandrake Linux\n" -#~ "system.\n" -#~ "\n" -#~ "Because the partitioning process' effects are usually irreversible,\n" -#~ "partitioning can be intimidating and stressful if you are an " -#~ "inexperienced\n" -#~ "user. Fortunately, there is a wizard which simplifies this process. " -#~ "Before\n" -#~ "beginning, please consult the manual and take your time.\n" -#~ "\n" -#~ "If you are running the installation in Expert mode, you will enter\n" -#~ "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" -#~ "fine-tune your partitions. See the DiskDrake section in the ``User " -#~ "Guide''.\n" -#~ "From the installation interface, you can use the wizards as described " -#~ "here\n" -#~ "by clicking the dialog's \"Wizard\" button.\n" -#~ "\n" -#~ "If partitions have already been defined, either from a previous\n" -#~ "installation or from another partitioning tool, simply select those to\n" -#~ "install your Linux system.\n" -#~ "\n" -#~ "If partitions are not defined, you will need to create them using the\n" -#~ "wizard. Depending on your hard drive configuration, several options are\n" -#~ "available:\n" -#~ "\n" -#~ " * \"Use free space\": this option will simply lead to an automatic\n" -#~ "partitioning of your blank drive(s). You will not be prompted further;\n" -#~ "\n" -#~ " * \"Use existing partition\": the wizard has detected one or more " -#~ "existing\n" -#~ "Linux partitions on your hard drive. If you want to use them, choose " -#~ "this\n" -#~ "option;\n" -#~ "\n" -#~ " * \"Use the free space on the Windows; partition\": if MicrosoftWindows " -#~ "is\n" -#~ "installed on your hard drive and takes all the space available on it, " -#~ "you\n" -#~ "have to create free space for Linux data. To do so, you can delete your\n" -#~ "MicrosoftWindows partition and data (see ``Erase entire disk'' or " -#~ "``Expert\n" -#~ "mode'' solutions) or resize your MicrosoftWindows partition. Resizing " -#~ "can\n" -#~ "be performed without the loss of any data, provided you previously\n" -#~ "defragment the Windows partition. Backing up your data won't hurt " -#~ "either..\n" -#~ "This solution is recommended if you want to use both Mandrake Linux and\n" -#~ "MicrosoftWindows on the same computer.\n" -#~ "\n" -#~ " Before choosing this option, please understand that after this " -#~ "procedure,\n" -#~ "the size of your MicrosoftWindows partition will be smaller than at the\n" -#~ "present time. You will have less free space under MicrosoftWindows to " -#~ "store\n" -#~ "your data or to install new software;\n" -#~ "\n" -#~ " * \"Erase entire disk\": if you want to delete all data and all " -#~ "partitions\n" -#~ "present on your hard drive and replace them with your new Mandrake Linux\n" -#~ "system, choose this option. Be careful with this solution because you " -#~ "will\n" -#~ "not be able to revert your choice after you confirm;\n" -#~ "\n" -#~ " !! If you choose this option, all data on your disk will be lost. !!\n" -#~ "\n" -#~ " * \"Remove Windows\": this will simply erase everything on the drive " -#~ "and\n" -#~ "begin fresh, partitioning everything from scratch. All data on your disk\n" -#~ "will be lost;\n" -#~ "\n" -#~ " !! If you choose this option, all data on your disk will be lost. !!\n" -#~ "\n" -#~ " * \"Expert mode\": choose this option if you want to manually partition\n" -#~ "your hard drive. Be careful it is a powerful but dangerous choice. You " -#~ "can\n" -#~ "very easily lose all your data. Hence, do not choose this unless you " -#~ "know\n" -#~ "what you are doing." -#~ msgstr "" -#~ "Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di " -#~ "harddisk.\n" -#~ "Bila harddisk masih kosong / ada sistem operasi lain yg mengisi " -#~ "seluruhnya,\n" -#~ "Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi " -#~ "harddisk\n" -#~ "adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem\n" -#~ "Mandrake Linux.\n" -#~ "\n" -#~ "Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), " -#~ "proses\n" -#~ "partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n" -#~ "berpengalaman. Untungnya, ada wizard yang mempermudah proses ini.\n" -#~ "Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.\n" -#~ "\n" -#~ "Jika Anda menggunakan mode Ahli, Anda akan masuk DiskDrake, alat partisi\n" -#~ "Mandrake Linux, yg memungkinkan fine-tuning partisi Anda. Lihat manual " -#~ "bab\n" -#~ "DiskDrake. Dari antarmuka instalasi, Anda dapat menggunakan wizard " -#~ "seperti\n" -#~ "dijelaskan di sini dg meng-klik tombol \"Wizard\".\n" -#~ "\n" -#~ "Bila partisi-partisi tsb sudah ada sebelumnya (hasil instal sebelumnya\n" -#~ "atau hasil program partisi lain), pilihlah partisi tsb utk tempat " -#~ "instalasi\n" -#~ "sistem Linux Anda.\n" -#~ "\n" -#~ "Jika belum ada partisi, Anda perlu membuatnya dengan program wizard. Ada\n" -#~ "bbrp opsi tergantung konfigurasi harddisk Anda:\n" -#~ "\n" -#~ " * \"Pakai ruang kosong\": opsi ini akan secara otomatis mem-partisi " -#~ "drive\n" -#~ "kosong Anda. Anda takkan ditanya lebih jauh.\n" -#~ "\n" -#~ " * \"Pakai partisi yang sudah ada\": wizard mendeteksi satu/lebih " -#~ "partisi\n" -#~ "Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi " -#~ "ini.\n" -#~ "\n" -#~ " * \"Pakai ruang kosong pada partisi Mindows\": jika wicrosoft mindows\n" -#~ "terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat " -#~ "ruang\n" -#~ "kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n" -#~ "(lihat solusi \"Hapus seluruh disk\" atau mode \"Ahli\") atau dapat juga\n" -#~ "mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan " -#~ "tanpa\n" -#~ "harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux\n" -#~ "Mandrake dan wicrosoft mindows dlm satu komputer.\n" -#~ "\n" -#~ " Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft " -#~ "mindows\n" -#~ "sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk " -#~ "menyimpan\n" -#~ "data / menginstall software baru menjadi kecil.\n" -#~ "\n" -#~ " * \"Hapus seluruh disk\": jika Anda ingin hapus semua data dan partisi " -#~ "di\n" -#~ "harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake " -#~ "Linux,\n" -#~ "pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n" -#~ "\n" -#~ " !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n" -#~ "\n" -#~ " * \"Buang Mindows\": ini akan menghapus semua di drive dan mulai proses\n" -#~ "partisi dari nol. Semua data di disk akan hilang.\n" -#~ "\n" -#~ " !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n" -#~ "\n" -#~ " * \"Mode ahli\": pilih jika Anda ingin secara manual mempartisi " -#~ "harddisk.\n" -#~ "Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan " -#~ "data\n" -#~ "dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan." - -#~ msgid "" -#~ "There you are. Installation is now complete and your GNU/Linux system is\n" -#~ "ready to use. Just click \"OK\" to reboot the system. You can start\n" -#~ "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" -#~ "soon as the computer has booted up again.\n" -#~ "\n" -#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" -#~ "\n" -#~ " * \"generate auto-install floppy\": to create an installation floppy " -#~ "disk\n" -#~ "which will automatically perform a whole installation without the help " -#~ "of\n" -#~ "an operator, similar to the installation you just configured.\n" -#~ "\n" -#~ " Note that two different options are available after clicking the " -#~ "button:\n" -#~ "\n" -#~ " * \"Replay\". This is a partially automated installation as the\n" -#~ "partitioning step (and only this one) remains interactive;\n" -#~ "\n" -#~ " * \"Automated\". Fully automated installation: the hard disk is " -#~ "completely\n" -#~ "rewritten, all data is lost.\n" -#~ "\n" -#~ " This feature is very handy when installing a great number of similar\n" -#~ "machines. See the Auto install section on our web site;\n" -#~ "\n" -#~ " * \"Save packages selection\"(*): saves the package selection as done\n" -#~ "previously. Then, when doing another installation, insert the floppy " -#~ "inside\n" -#~ "the drive and run the installation going to the help screen by pressing " -#~ "on\n" -#~ "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" -#~ "\n" -#~ "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -#~ "\"mformat a:\")" -#~ msgstr "" -#~ "Oke, instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n" -#~ "\"OK\" utk reboot sistem. Anda dapat menjalankan GNU/Linux atau Windows,\n" -#~ "tergantung pilihan Anda (jika Anda memakai dual-boot).\n" -#~ "\n" -#~ "Tombol \"Tambahan\" (hanya di mode Ahli) menampilkan 2 tombol utk:\n" -#~ "\n" -#~ " * \"Membuat floppy instalasi otomatis\": utk membuat disket instalasi " -#~ "yang\n" -#~ "akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg\n" -#~ "instalasi yang baru Anda konfigurasikan.\n" -#~ "\n" -#~ " Ada dua opsi setelah tombol di-klik:\n" -#~ "\n" -#~ " * \"Ulang\". Instalasi semi-otomatis, hanya proses partisi yang " -#~ "tetap\n" -#~ "interaktif.\n" -#~ "\n" -#~ " * \"Otomatis\". Instalasi otomatis penuh: harddisk ditulis ulang\n" -#~ "seluruhnya, semua data hilang.\n" -#~ "\n" -#~ " Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi " -#~ "sama.\n" -#~ "Lihat pasal Auto install di website kami.\n" -#~ "\n" -#~ " * \"Menyimpan pilihan paket\"(*): simpan pilihan paket seperti yang " -#~ "dibuat\n" -#~ "sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke " -#~ "driver\n" -#~ "dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu " -#~ "ketik\n" -#~ ">>linux defcfg=\"floppy\"<<.\n" -#~ "\n" -#~ "(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, " -#~ "jalankan\n" -#~ "\"mformat a:\")" - -#~ msgid "" -#~ "At this point, you need to choose which partition(s) will be used for " -#~ "the\n" -#~ "installation of your Mandrake Linux system. If partitions have already " -#~ "been\n" -#~ "defined, either from a previous installation of GNU/Linux or from " -#~ "another\n" -#~ "partitioning tool, you can use existing partitions. Otherwise, hard " -#~ "drive\n" -#~ "partitions must be defined.\n" -#~ "\n" -#~ "To create partitions, you must first select a hard drive. You can select\n" -#~ "the disk for partitioning by clicking on ``hda'' for the first IDE " -#~ "drive,\n" -#~ "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" -#~ "\n" -#~ "To partition the selected hard drive, you can use these options:\n" -#~ "\n" -#~ " * \"Clear all\": this option deletes all partitions on the selected " -#~ "hard\n" -#~ "drive;\n" -#~ "\n" -#~ " * \"Auto allocate\": this option enables to automatically create \"Ext2" -#~ "\"\n" -#~ "and swap partitions in free space of your hard drive;\n" -#~ "\n" -#~ " * \"More\": gives access to additional features:\n" -#~ "\n" -#~ " * \"Save partition table\": saves the partition table to a floppy. " -#~ "Useful\n" -#~ "for later partition-table recovery if necessary. It is strongly " -#~ "recommended\n" -#~ "to perform this step;\n" -#~ "\n" -#~ " * \"Restore partition table\": allows to restore a previously saved\n" -#~ "partition table from floppy disk;\n" -#~ "\n" -#~ " * \"Rescue partition table\": if your partition table is damaged, you " -#~ "can\n" -#~ "try to recover it using this option. Please be careful and remember that " -#~ "it\n" -#~ "can fail;\n" -#~ "\n" -#~ " * \"Reload partition table\": discards all changes and loads your " -#~ "initial\n" -#~ "partition table;\n" -#~ "\n" -#~ " * \"Removable media automounting\": unchecking this option will force " -#~ "users\n" -#~ "to manually mount and unmount removable medias such as floppies and\n" -#~ "CD-ROMs.\n" -#~ "\n" -#~ " * \"Wizard\": use this option if you wish to use a wizard to partition " -#~ "your\n" -#~ "hard drive. This is recommended if you do not have a good knowledge of\n" -#~ "partitioning;\n" -#~ "\n" -#~ " * \"Undo\": use this option to cancel your changes;\n" -#~ "\n" -#~ " * \"Toggle to normal/expert mode\": allows additional actions on " -#~ "partitions\n" -#~ "(type, options, format) and gives more information;\n" -#~ "\n" -#~ " * \"Done\": when you are finished partitioning your hard drive, this " -#~ "will\n" -#~ "save your changes back to disk.\n" -#~ "\n" -#~ "Note: you can reach any option using the keyboard. Navigate through the\n" -#~ "partitions using [Tab] and [Up/Down] arrows.\n" -#~ "\n" -#~ "When a partition is selected, you can use:\n" -#~ "\n" -#~ " * Ctrl-c to create a new partition (when an empty partition is " -#~ "selected);\n" -#~ "\n" -#~ " * Ctrl-d to delete a partition;\n" -#~ "\n" -#~ " * Ctrl-m to set the mount point.\n" -#~ "\n" -#~ "To get information about the different filesystem types available, " -#~ "please\n" -#~ "read the ext2fs chapter from the ``Reference Manual''.\n" -#~ "\n" -#~ "If you are installing on a PPC machine, you will want to create a small " -#~ "HFS\n" -#~ "``bootstrap'' partition of at least 1MB, which will be used by the " -#~ "yaboot\n" -#~ "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -#~ "may find it a useful place to store a spare kernel and ramdisk images " -#~ "for\n" -#~ "emergency boot situations." -#~ msgstr "" -#~ "Kini Anda perlu menentukan partisi yg akan dipakai utk instalasi sistem\n" -#~ "Mandrake Linux. Jika partisi telah didefinisikan, pada instalasi\n" -#~ "GNU/Linux sebelumnya atau dg alat partisi lain, Anda dapat memakai " -#~ "partisi\n" -#~ "yang ada. Jika tidak, partisi harddisk harus didefinisikan.\n" -#~ "\n" -#~ "Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk " -#~ "utk\n" -#~ "dipartisi dg mengklik \"hda\" utk harddisk IDE pertama, \"hdb\" utk disk\n" -#~ "kedua, \"sda\" untuk drive SCSI pertama dst.\n" -#~ "\n" -#~ "Untuk mempartisi harddisk terpilih, opsi berikut dapat digunakan:\n" -#~ "\n" -#~ " * \"Hapus semua\": opsi ini menghapus semua partisi pd harddisk " -#~ "terpilih.\n" -#~ "\n" -#~ " * \"Alokasi otomatis\": opsi ini memungkinkan Anda secara otomatis " -#~ "membuat\n" -#~ "partisi Ext2 dan swap di ruang kosong hard drive Anda.\n" -#~ "\n" -#~ " * \"Tambahan\": akses ke fitur tambahan:\n" -#~ "\n" -#~ " * \"Simpan tabel partisi\": simpan tabel partisi ke floppy. Berguna\n" -#~ "untuk pemulihan tabel-partisi di kemudian hari bila perlu. Amat " -#~ "disarankan.\n" -#~ "\n" -#~ " * \"Pulihkan tabel partisi\": mengembalikan tabel partisi yg " -#~ "disimpan\n" -#~ "sebelumnya dari floppy.\n" -#~ "\n" -#~ " * \"Selamatkan tabel partisi\": jika tabel partisi Anda rusak, " -#~ "cobalah\n" -#~ "mengembalikannya dg opsi ini. Hati-hati dan ingat bhw ini bisa gagal.\n" -#~ "\n" -#~ " * \"Muat ulang tabel partisi\": buang semua perubahan dan muat tabel\n" -#~ "partisi semula.\n" -#~ "\n" -#~ " * \"Mount otomatis media lepas\": Jika opsi ini dilepas, user harus\n" -#~ "secara manual me-mount/unmount media lepas seperti disket dan CD-ROM.\n" -#~ "\n" -#~ " * \"Wizard\": pilih ini jika ingin memakai wizard utk mempartisi " -#~ "harddisk.\n" -#~ "Disarankan jika Anda tak faham ttg partisi.\n" -#~ "\n" -#~ " * \"Kembali\": untuk membatalkan perubahan.\n" -#~ "\n" -#~ " * \"Ubah ke mode normal/ahli\": aksi tambahan proses partisi (tipe, " -#~ "opsi,\n" -#~ "format) dan informasi lebih.\n" -#~ "\n" -#~ " * \"Selesai\": simpan perubahan ke harddisk bila Anda selesai " -#~ "mempartisi.\n" -#~ "\n" -#~ "Catatan: Anda dapat meraih semua opsi dg memakai keyboard. Gunakan [Tab]\n" -#~ "dan panah [Up/Down].\n" -#~ "\n" -#~ "Saat partisi dipilih, Anda dapat menggunakan:\n" -#~ "\n" -#~ " * Ctrl-c utk membuat partisi baru (bila partisi kosong dipilih);\n" -#~ "\n" -#~ " * Ctrl-d utk menghapus partisi;\n" -#~ "\n" -#~ " * Ctrl-m utk menset titik mount\n" -#~ "\n" -#~ "Jika Anda menginstal mesin PPC Anda perlu membuat partisi \"bootstrap\" " -#~ "HFS\n" -#~ "kecil setidaknya 1MB yg akan dipakai oleh bootloader yaboot. Jika dibuat\n" -#~ "lebih besar, katakan 50MB, Anda bisa memanfaatkannya utk menyimpan " -#~ "kernel\n" -#~ "cadangan dan image ramdisk utk situasi boot darurat." - -#~ msgid "" -#~ "DrakX now needs to know if you want to perform a default (\"Recommended" -#~ "\")\n" -#~ "installation or if you want to have greater control (\"Expert\"). You " -#~ "can\n" -#~ "also choose to do a new install or an upgrade of an existing Mandrake " -#~ "Linux\n" -#~ "system:\n" -#~ "\n" -#~ " * \"Install\": completely wipes out the old system. In fact, depending " -#~ "on\n" -#~ "what currently holds your machine, you will be able to keep some old " -#~ "(Linux\n" -#~ "or other) partitions unchanged;\n" -#~ "\n" -#~ " * \"Upgrade\": this installation class allows to simply update the " -#~ "packages\n" -#~ "currently installed on your Mandrake Linux system. It keeps the current\n" -#~ "partitions of your hard drives as well as user configurations. All other\n" -#~ "configuration steps remain available with respect to plain installation;\n" -#~ "\n" -#~ " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" -#~ "existing Mandrake Linux system while keeping all system configurations\n" -#~ "unchanged. Adding new packages to the current installation is also\n" -#~ "possible.\n" -#~ "\n" -#~ "Upgrades should work fine for Mandrake Linux systems starting from \"8.1" -#~ "\"\n" -#~ "release.\n" -#~ "\n" -#~ "Depending on your knowledge of GNU/Linux, select one of the following\n" -#~ "choices:\n" -#~ "\n" -#~ " * Recommended: choose this if you have never installed a GNU/Linux\n" -#~ "operating system. The installation will be very easy and you will only " -#~ "be\n" -#~ "asked a few questions;\n" -#~ "\n" -#~ " * Expert: if you have a good knowledge of GNU/Linux, you can choose " -#~ "this\n" -#~ "installation class. The expert installation will allow you to perform a\n" -#~ "highly-customized installation. Answering some of the questions can be\n" -#~ "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" -#~ "choose this unless you know what you are doing." -#~ msgstr "" -#~ "DrakX kini perlu tahu Anda ingin instalasi standar (\"Disarankan\") atau\n" -#~ "ingin punya kontrol lebih besar (\"Ahli\"). Anda juga punya pilihan utk\n" -#~ "melakukan instalasi baru atau upgrade sistem Mandrake Linux yg ada:\n" -#~ "\n" -#~ " * \"Instal\" Hapus total sistem lama. Tergantung isi mesin Anda saat " -#~ "ini,\n" -#~ "Anda dapat mempertahankan partisi lama (Linux atau lainnya).\n" -#~ "\n" -#~ " * \"Upgrade\" Kelas instalasi ini memungkinkan update paket yang " -#~ "terinstal\n" -#~ "di sistem Mandrake Linux Anda. Partisi dan konfigurasi user yang ada " -#~ "tetap\n" -#~ "dipertahankan. Semua tahapan konfigurasi lain tetap ada seperti layaknya\n" -#~ "instalasi biasa.\n" -#~ "\n" -#~ " * \"Upgrade Paket Saja\" Kelas instalasi baru yang memungkinkan upgrade\n" -#~ "sistem Mandrake Linux tanpa mengubah konfigurasi sistem. Penambahan " -#~ "paket\n" -#~ "juga dimungkinkan.\n" -#~ "\n" -#~ "Upgrade dapat dilakukan terhadap sistem Mandrake Linux mulai versi \"8.1" -#~ "\".\n" -#~ "\n" -#~ "Pilihlah opsi berikut sesuai pengetahuan Anda ttg GNU/Linux:\n" -#~ "\n" -#~ " * Disarankan: pilih ini bila Anda belum pernah menginstal OS GNU/Linux.\n" -#~ "Proses instalasi amat mudah dan Anda hanya ditanya sedikit pertanyaan.\n" -#~ "\n" -#~ " * Ahli: Anda dapat memiilih kelas instalasi ini jika tahu banyak " -#~ "tentang\n" -#~ "GNU/Linux. Instalasi ahli memungkinkan Anda melakukan instalasi bebas.\n" -#~ "Bbrp pertanyaan sulit dijawab jika Anda tak berpengetahuan kuat tentang\n" -#~ "GNU/Linux. Jangan pilih kelas ini kecuali Anda tahu apa yang Anda lakukan." - -#~ msgid "" -#~ "This is the most crucial decision point for the security of your GNU/" -#~ "Linux\n" -#~ "system: you have to enter the \"root\" password. \"root\" is the system\n" -#~ "administrator and is the only one authorized to make updates, add users,\n" -#~ "change the overall system configuration, and so on. In short, \"root\" " -#~ "can\n" -#~ "do everything! That is why you must choose a password that is difficult " -#~ "to\n" -#~ "guess DrakX will tell you if it is too easy. As you can see, you can " -#~ "choose\n" -#~ "not to enter a password, but we strongly advise you against this if only\n" -#~ "for one reason: do not think that because you booted GNU/Linux that your\n" -#~ "other operating systems are safe from mistakes. Since \"root\" can " -#~ "overcome\n" -#~ "all limitations and unintentionally erase all data on partitions by\n" -#~ "carelessly accessing the partitions themselves, it is important for it " -#~ "to\n" -#~ "be difficult to become \"root\".\n" -#~ "\n" -#~ "The password should be a mixture of alphanumeric characters and at least " -#~ "8\n" -#~ "characters long. Never write down the \"root\" password it makes it too\n" -#~ "easy to compromise a system.\n" -#~ "\n" -#~ "However, please do not make the password too long or complicated because\n" -#~ "you must be able to remember it without too much effort.\n" -#~ "\n" -#~ "The password will not be displayed on screen as you type it in. Hence, " -#~ "you\n" -#~ "will have to type the password twice to reduce the chance of a typing\n" -#~ "error. If you do happen to make the same typing error twice, this\n" -#~ "``incorrect'' password will have to be used the first time you connect.\n" -#~ "\n" -#~ "In Expert mode, you will be asked if you will be connecting to an\n" -#~ "authentication server, like NIS or LDAP.\n" -#~ "\n" -#~ "If your network uses the LDAP (or NIS) protocol for authentication, " -#~ "select\n" -#~ "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" -#~ "network administrator.\n" -#~ "\n" -#~ "If your computer is not connected to any administrated network, you will\n" -#~ "want to choose \"Local files\" for authentication." -#~ msgstr "" -#~ "Ini adalah poin terpenting penentuan sekuriti sistem GNU/Linux Anda: " -#~ "Anda\n" -#~ "harus mengisi katasandi \"root\". \"root\" adalah administrator sistem " -#~ "dan\n" -#~ "hanya dia yg berhak melakukan update, menambah user, mengubah " -#~ "konfigurasi\n" -#~ "sistem, dll. Singkatnya, \"root\" dapat melakukan apapun! Karena itu " -#~ "Anda\n" -#~ "harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika\n" -#~ "terlalu mudah. Seperti Anda lihat, Anda dapat memilih utk tak memasukkan\n" -#~ "katasandi, tapi amat kami anjurkan tidak melakukannya jika alasannya " -#~ "hanya:\n" -#~ "tidak mengira bhw jika GNU/Linux di-boot, sistem operasi lain aman dari\n" -#~ "kesalahan. Karena \"root\" dapat melampaui semua batasan dan secara " -#~ "tidak\n" -#~ "sengaja menghapus semua data di partisi, menjadi \"root\" harus " -#~ "dipersulit.\n" -#~ "\n" -#~ "Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. " -#~ "Jangan\n" -#~ "pernah mencatat katasandi \"root\" - itu membuat sistem mudah dibajak.\n" -#~ "\n" -#~ "Tapi katasandi juga jangan terlalu panjang/rumit karena Anda harus ingat\n" -#~ "tanpa banyak usaha.\n" -#~ "\n" -#~ "Katasandi takkan muncul di layar seperti yg diketikkan. Anda harus dua " -#~ "kali\n" -#~ "mengisi katasandi utk mengurangi kemungkinan salah ketik. Jika Anda 2 " -#~ "kali\n" -#~ "melakukan kesalahan yg sama, katasandi \"salah\" ini akan dipakai " -#~ "pertama\n" -#~ "kali anda login.\n" -#~ "\n" -#~ "Pada mode ahli, Anda akan ditanya apakah akan berhubungan dengan server\n" -#~ "otentikasi seperti NIS atau LDAP.\n" -#~ "\n" -#~ "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih \"LDAP\"\n" -#~ "(atau \"NIS\") utk otentikasi. Tanyalah admin jaringan Anda jika tak " -#~ "tahu.\n" -#~ "\n" -#~ "Jika komputer Anda tak terhubung dengan jaringan terkelola, pilihlah\n" -#~ "\"File lokal\" untuk otentikasi." - -#~ msgid "" -#~ "LILO and grub are GNU/Linux bootloaders. This stage, normally, is " -#~ "totally\n" -#~ "automated. In fact, DrakX analyzes the disk boot sector and acts\n" -#~ "accordingly, depending on what it finds here:\n" -#~ "\n" -#~ " * if a Windows boot sector is found, it will replace it with a grub/" -#~ "LILO\n" -#~ "boot sector. Hence, you will be able to load either GNU/Linux or another\n" -#~ "OS;\n" -#~ "\n" -#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n" -#~ "one.\n" -#~ "\n" -#~ "If in doubt, DrakX will display a dialog with various options.\n" -#~ "\n" -#~ " * \"Bootloader to use\": you have three choices:\n" -#~ "\n" -#~ " * \"GRUB\": if you prefer grub (text menu).\n" -#~ "\n" -#~ " * \"LILO with graphical menu\": if you prefer LILO with its " -#~ "graphical\n" -#~ "interface.\n" -#~ "\n" -#~ " * \"LILO with text menu\": if you prefer LILO with its text menu " -#~ "interface.\n" -#~ "\n" -#~ " * \"Boot device\": in most cases, you will not change the default\n" -#~ "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on " -#~ "the\n" -#~ "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0" -#~ "\");\n" -#~ "\n" -#~ " * \"Delay before booting the default image\": when rebooting the " -#~ "computer,\n" -#~ "this is the delay granted to the user to choose in the bootloader menu,\n" -#~ "another boot entry than the default one.\n" -#~ "\n" -#~ "!! Beware that if you choose not to install a bootloader (by selecting\n" -#~ "\"Cancel\" here), you must ensure that you have a way to boot your " -#~ "Mandrake\n" -#~ "Linux system! Also, be sure you know what you do before changing any of " -#~ "the\n" -#~ "options. !!\n" -#~ "\n" -#~ "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" -#~ "options, which are reserved to the expert user.\n" -#~ "\n" -#~ "After you have configured the general bootloader parameters, the list of\n" -#~ "boot options which will be available at boot time will be displayed.\n" -#~ "\n" -#~ "If there is another operating system installed on your machine, it will\n" -#~ "automatically be added to the boot menu. Here, you can choose to fine-" -#~ "tune\n" -#~ "the existing options. Select an entry and click \"Modify\" to modify or\n" -#~ "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" -#~ "installation step." -#~ msgstr "" -#~ "LILO/GRUB adalah pemuat boot GNU/Linux. Step ini biasanya otomatis " -#~ "penuh.\n" -#~ "DrakX menganalisa sektor boot disk dan beraksi menurut apa yg ditemukan:\n" -#~ "\n" -#~ " * jika sektor boot Mindows ditemukan, ia akan menggantinya dg sektor " -#~ "boot\n" -#~ "GRUB/LILO. Jadi Anda akan dapat memuat baik GNU/Linux maupun OS lain;\n" -#~ "\n" -#~ " * jika sektor boot GRUB/LILO ditemukan, ia akan menggantinya dg yg " -#~ "baru;\n" -#~ "\n" -#~ "Jika ragu, DrakX akan menampilkan dialog dengan opsi bervariasi.\n" -#~ "\n" -#~ " * \"Pemuat boot yang digunakan\": ada tiga pilihan:\n" -#~ "\n" -#~ " * \"GRUB\": jika Anda suka GRUB (menu teks).\n" -#~ "\n" -#~ " * \"LILO dengan menu grafis\": jika Anda suka LILO dg antarmuka " -#~ "grafis.\n" -#~ "\n" -#~ " * \"LILO dengan menu teks\": jika suka LILO dengan antarmuka menu " -#~ "teks.\n" -#~ "\n" -#~ " * \"Device boot\": Umumnya Anda takkan mengubah standar (\"/dev/hda\"),\n" -#~ "tapi jika suka, bootloader dapat diinstal di harddisk kedua (\"/dev/hdb" -#~ "\"),\n" -#~ "ataupun disket (\"/dev/fd0\").\n" -#~ "\n" -#~ " * \"Delay sebelum boot ke image default\": delay yang diberikan di menu\n" -#~ "pemuat boot kepada user saat me-reboot komputer untuk memilih entri.\n" -#~ "\n" -#~ "!! Awas, jika pemuat boot tak diinstal (dg memilih \"Cancel\" di sini),\n" -#~ "pastikan Anda punya jalan memboot sistem Mandrake Linux Anda! Juga " -#~ "pastikan\n" -#~ "bahwa Anda tahu apa yang Anda lakukan sebelum mengubah opsi. !!\n" -#~ "\n" -#~ "Klik \"Tambahan\" untuk menampilkan opsi lain, yg disediakan utk user " -#~ "ahli.\n" -#~ "\n" -#~ "Setelah parameter pemuat-boot dikonfigurasikan, ditampilkan daftar opsi\n" -#~ "boot yang akan muncul saat boot.\n" -#~ "\n" -#~ "Jika ada OS lain terinstal di mesin Anda, itu akan otomatis ditambahkan " -#~ "ke\n" -#~ "menu boot. Di sini Anda dapat memperbaiki opsi yang ada. Pilih entri dan\n" -#~ "klik \"Modifikasi\" untuk mengubah atau menghapusnya; \"Tambah\"\n" -#~ "membuat masukan baru; dan \"Selesai\" membawa Anda ke tahap instalasi\n" -#~ "berikutnya." - -#~ msgid "" -#~ "Here, we select a printing system for your computer. Other OSs may offer\n" -#~ "you one, but Mandrake Linux offers three.\n" -#~ "\n" -#~ " * \"pdq\" which means ``print, don't queue'', is the choice if you have " -#~ "a\n" -#~ "direct connection to your printer and you want to be able to panic out " -#~ "of\n" -#~ "printer jams, and you do not have networked printers. It will handle " -#~ "only\n" -#~ "very simple network cases and is somewhat slow for networks. Pick \"pdq" -#~ "\"\n" -#~ "if this is your maiden voyage to GNU/Linux. You can change your choices\n" -#~ "after installation by running PrinterDrake from the Mandrake Control " -#~ "Center\n" -#~ "and clicking the expert button.\n" -#~ "\n" -#~ " * \"CUPS\"``Common Unix Printing System'', is excellent at printing to " -#~ "your\n" -#~ "local printer and also halfway-around the planet. It is simple and can " -#~ "act\n" -#~ "as a server or a client for the ancient \"lpd\" printing system. Hence, " -#~ "it\n" -#~ "is compatible with the systems that went before. It can do many tricks, " -#~ "but\n" -#~ "the basic setup is almost as easy as \"pdq\". If you need this to " -#~ "emulate\n" -#~ "an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" -#~ "graphical front-ends for printing or choosing printer options.\n" -#~ "\n" -#~ " * \"lprNG\"``line printer daemon New Generation''. This system can do\n" -#~ "approximately the same things the others can do, but it will print to\n" -#~ "printers mounted on a Novell Network, because it supports the IPX " -#~ "protocol,\n" -#~ "and it can print directly to shell commands. If you have need of Novell " -#~ "or\n" -#~ "printing to commands without using a separate pipe construct, use lprNG.\n" -#~ "Otherwise, CUPS is preferable as it is simpler and better at working " -#~ "over\n" -#~ "networks." -#~ msgstr "" -#~ "Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n" -#~ "Mandrake menyediakan tiga.\n" -#~ "\n" -#~ " * \"pdq\" - artinya ``print, djangan nqantri'', adalah pilihan jika " -#~ "Anda\n" -#~ "punya koneksi langsung ke printer Anda dan ingin bebas dari panik " -#~ "kemacetan\n" -#~ "printer, serta tak punya printer jaringan. Ia akan meng-handle hanya " -#~ "kasus\n" -#~ "jaringan yg amat mudah dan agak lambat utk network. Ambil \"pdq\" jika " -#~ "ini\n" -#~ "kali pertama Anda mengenal GNU/Linux. Anda dapat mengubah pilihan " -#~ "setelah\n" -#~ "instalasi dg menjalankan PrinterDrake dari Pusat Kontrol Mandrake dan\n" -#~ "meng-klik tombol expert/ahli.\n" -#~ "\n" -#~ " * \"CUPS\"``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer\n" -#~ "lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk\n" -#~ "sistem cetak kuno \"lpd\" jadi kompatibel dg sistem lama. Banyak trik " -#~ "dapat\n" -#~ "dilakukan, tapi setup awalnya hampir semudah \"pdq\". Jika Anda perlu " -#~ "ini\n" -#~ "utk emulasi server \"lpd\", Anda harus menyalakan daemon \"cups-lpd\".\n" -#~ "Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.\n" -#~ "\n" -#~ " * \"lprNG\"``daemon printer baris Generasi Baru''. Sistem ini dapat\n" -#~ "melakukan hal yg mirip dg yg bisa dilakukan sistem lain, hanya saja ia " -#~ "akan\n" -#~ "mencetak ke printer yang terhubung dengan network Novell, karena " -#~ "mensupport\n" -#~ "protokol IPX, dan bisa mencetak langsung ke perintah shell. Jika Anda " -#~ "perlu\n" -#~ "Novell atau mencetak ke perintah tanpa memakai konstruksi pipa terpisah,\n" -#~ "gunakan lprNG. Jika tidak, pilihlah CUPS sebab lebih mudah dan bekerja " -#~ "baik\n" -#~ "di network." - -#~ msgid "" -#~ "DrakX now detects any IDE device present in your computer. It will also\n" -#~ "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" -#~ "found, DrakX will automatically install the appropriate driver.\n" -#~ "\n" -#~ "Because hardware detection does not always detect a piece of hardware,\n" -#~ "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes" -#~ "\"\n" -#~ "if you know that there is a SCSI card installed in your machine. You " -#~ "will\n" -#~ "be presented a list of SCSI cards to choose from. Click \"No\" if you " -#~ "have\n" -#~ "no SCSI hardware. If you are unsure, you can check the list of hardware\n" -#~ "detected in your machine by selecting \"See hardware info\" and clicking\n" -#~ "\"OK\". Examine the list of hardware and then click on the \"OK\" button " -#~ "to\n" -#~ "return to the SCSI interface question.\n" -#~ "\n" -#~ "If you have to manually specify your adapter, DrakX will ask if you want " -#~ "to\n" -#~ "specify options for it. You should allow DrakX to probe the hardware for\n" -#~ "the card-specific options which the hardware needs to initialize. This\n" -#~ "usually works well.\n" -#~ "\n" -#~ "If DrakX is not able to probe for the options which need to be passed, " -#~ "you\n" -#~ "will need to provide options to the driver manually. Please review the\n" -#~ "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" -#~ "Hardware'' section) for hints on retrieving the parameters required from\n" -#~ "hardware documentation, from the manufacturer's web site (if you have\n" -#~ "Internet access) or from MicrosoftWindows (if you used this hardware " -#~ "with\n" -#~ "Windows on your system)." -#~ msgstr "" -#~ "DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n" -#~ "SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n" -#~ "meng-instal driver yang sesuai.\n" -#~ "\n" -#~ "Karena perangkat keras terkadang tak terdeteksi, DrakX akan bertanya " -#~ "apakah\n" -#~ "ada kartu SCSI PCI. Klik \"Ya\" jika Anda tahu ada kartu SCSI terinstal " -#~ "di\n" -#~ "mesin Anda. Akan disajikan list kartu SCSI utk dipilih. Klik \"Tidak\" " -#~ "jika\n" -#~ "tak ada hardware SCSI. Jika Anda tak yakin, periksa daftar perangkat " -#~ "keras\n" -#~ "yang terdeteksi di mesin Anda dg memilih \"Lihat info hardware\" lalu " -#~ "klik\n" -#~ "\"OK\". Periksa daftar hardware lalu klik \"OK\" utk kembali.\n" -#~ "\n" -#~ "Jika Anda harus menunjuk adaptor secara manual, DrakX akan bertanya " -#~ "apakah\n" -#~ "Anda ingin menunjuk opsi untuknya. Anda harus mengizinkan DrakX mem-" -#~ "probe\n" -#~ "hardware utk opsi spesifik-kartu yg diperlukan hardware utk inisiasi. " -#~ "Ini\n" -#~ "biasanya bekerja baik.\n" -#~ "\n" -#~ "Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu " -#~ "memberikan\n" -#~ "opsi ke driver secara manual. Baca ``User Guide'' (bab 3, bag. " -#~ "\"Collecting\n" -#~ "information on your hardware\") utk trik mendapat parameter yg " -#~ "dibutuhkan\n" -#~ "dari dokumentasi hardware, website pabrik (jika Anda punya akses " -#~ "Internet)\n" -#~ "atau wicrosoft mindows (jika Anda memakai hardware ini di windows)." - -#~ msgid "" -#~ "You can add additional entries for yaboot, either for other operating\n" -#~ "systems, alternate kernels, or for an emergency boot image.\n" -#~ "\n" -#~ "For other OSs, the entry consists only of a label and the \"root\"\n" -#~ "partition.\n" -#~ "\n" -#~ "For Linux, there are a few possible options:\n" -#~ "\n" -#~ " * Label: this is simply the name you will have to type at the yaboot " -#~ "prompt\n" -#~ "to select this boot option;\n" -#~ "\n" -#~ " * Image: this would be the name of the kernel to boot. Typically, " -#~ "vmlinux\n" -#~ "or a variation of vmlinux with an extension;\n" -#~ "\n" -#~ " * Root: the \"root\" device or ``/'' for your Linux installation;\n" -#~ "\n" -#~ " * Append: on Apple hardware, the kernel append option is used quite " -#~ "often\n" -#~ "to assist in initializing video hardware, or to enable keyboard mouse\n" -#~ "button emulation for the often lacking 2nd and 3rd mouse buttons on a " -#~ "stock\n" -#~ "Apple mouse. The following are some examples:\n" -#~ "\n" -#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -#~ "hda=autotune\n" -#~ "\n" -#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -#~ "\n" -#~ " * Initrd: this option can be used either to load initial modules, " -#~ "before\n" -#~ "the boot device is available, or to load a ramdisk image for an " -#~ "emergency\n" -#~ "boot situation;\n" -#~ "\n" -#~ " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If " -#~ "you\n" -#~ "need to allocate a large ramdisk, this option can be used;\n" -#~ "\n" -#~ " * Read-write: normally the \"root\" partition is initially brought up " -#~ "in\n" -#~ "read-only, to allow a file system check before the system becomes " -#~ "``live''.\n" -#~ "Here, you can override this option;\n" -#~ "\n" -#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n" -#~ "problematic, you can select this option to boot in ``novideo'' mode, " -#~ "with\n" -#~ "native frame buffer support;\n" -#~ "\n" -#~ " * Default: selects this entry as being the default Linux selection,\n" -#~ "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" -#~ "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" -#~ "selections." -#~ msgstr "" -#~ "Anda dapat menambahkan entri yaboot, baik untuk OS lain, kernel lain, " -#~ "atau\n" -#~ "untuk image boot darurat.\n" -#~ "\n" -#~ "Untuk OS lain, entri hanya berisi label dan partisi root.\n" -#~ "\n" -#~ "Untuk Linux, ada beberapa pilihan:\n" -#~ "\n" -#~ " * Label: nama yg harus diketik di prompt yaboot utk memilih opsi boot " -#~ "ini.\n" -#~ "\n" -#~ " * Image: nama kernel untuk diboot. Biasanya bernama vmlinux atau nama " -#~ "lain\n" -#~ "yang mirip dengan vmlinux atau ditambahkan ekstensi lain.\n" -#~ "\n" -#~ " * Root: device \"root\" atau \"/\" untuk instalasi Linux Anda.\n" -#~ "\n" -#~ " * Append: pada hardware Apple, opsi append kernel sering digunakan " -#~ "untuk\n" -#~ "menolong inisialisasi hardware video, atau pengaktifan emulasi tombol " -#~ "mouse\n" -#~ "pada keyboard utk mouse Apple yang tidak memiliki tombol kedua dan " -#~ "ketiga.\n" -#~ "Berikut adalah beberapa contohnya:\n" -#~ "\n" -#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -#~ "hda=autotune\n" -#~ "\n" -#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -#~ "\n" -#~ " * Initrd: opsi ini bisa dipakai utk memuat modul awal sebelum device " -#~ "boot\n" -#~ "tersedia, atau untuk memuat image ramdisk untuk situasi boot darurat.\n" -#~ "\n" -#~ " * Initrd-size: standar ukuran ramdisk biasanya 4096 byte. Jika Anda " -#~ "perlu\n" -#~ "mengalokasikan ramdisk yang lebih besar, gunakan opsi ini.\n" -#~ "\n" -#~ " * Read-write: umumnya partisi \"root\" diberikan secara readonly agar " -#~ "bisa\n" -#~ "dilakukan pengecekan filesystem sebelum sistem \"hidup\". Di sini Anda " -#~ "bisa\n" -#~ "mengubah kelakuan aslinya.\n" -#~ "\n" -#~ " * NoVideo: Jika hardware video Apple problematis, Anda dapat memakai " -#~ "opsi\n" -#~ "ini utk mem-boot dalam mode \"novideo\", dengan support framebuffer " -#~ "native.\n" -#~ "\n" -#~ " * Default: opsi standar Linux, dapat dipilih hanya dg menekan ENTER " -#~ "pada\n" -#~ "prompt yaboot. Entri ini juga akan ditandai \"*\" jika Anda menekan " -#~ "[Tab]\n" -#~ "untuk melihat pilihan boot." - -#~ msgid "" -#~ "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to " -#~ "boot\n" -#~ "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" -#~ "these other operating systems are correctly detected and installed. If " -#~ "this\n" -#~ "is not the case, you can add an entry by hand in this screen. Be careful " -#~ "to\n" -#~ "choose the correct parameters.\n" -#~ "\n" -#~ "Yaboot's main options are:\n" -#~ "\n" -#~ " * Init Message: a simple text message displayed before the boot prompt;\n" -#~ "\n" -#~ " * Boot Device: indicates where you want to place the information " -#~ "required\n" -#~ "to boot to GNU/Linux. Generally, you set up a bootstrap partition " -#~ "earlier\n" -#~ "to hold this information;\n" -#~ "\n" -#~ " * Open Firmware Delay: unlike LILO, there are two delays available with\n" -#~ "yaboot. The first delay is measured in seconds and at this point, you " -#~ "can\n" -#~ "choose between CD, OF boot, MacOS or Linux;\n" -#~ "\n" -#~ " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -#~ "After selecting Linux, you will have this delay in 0.1 second before " -#~ "your\n" -#~ "default kernel description is selected;\n" -#~ "\n" -#~ " * Enable CD Boot?: checking this option allows you to choose ``C'' for " -#~ "CD\n" -#~ "at the first boot prompt;\n" -#~ "\n" -#~ " * Enable OF Boot?: checking this option allows you to choose ``N'' for " -#~ "Open\n" -#~ "Firmware at the first boot prompt;\n" -#~ "\n" -#~ " * Default OS: you can select which OS will boot by default when the " -#~ "Open\n" -#~ "Firmware Delay expires." -#~ msgstr "" -#~ "Yaboot adalah pemuat boot utk hardware NewWorld MacIntosh. Ia mampu " -#~ "memboot\n" -#~ "GNU/Linux, MacOS maupun MacOSX jika terdapat di komputer Anda. Biasanya,\n" -#~ "OS lain ini terdeteksi dan terinstal dengan benar. Jika tidak, Anda " -#~ "dapat\n" -#~ "menambahkan entry secara manual di layar ini. Hati-hati memilih " -#~ "parameter.\n" -#~ "\n" -#~ "Opsi utama yaboot adalah:\n" -#~ "\n" -#~ " * Pesan Awal: pesan teks yang ditampilkan sebelum prompt boot.\n" -#~ "\n" -#~ " * Device Boot: menunjukkan tempat Anda ingin meletakkan info yg " -#~ "diperlukan\n" -#~ "utk memboot GNU/LInux. Biasanya Anda men-setup partisi bootstrap lebih " -#~ "dulu\n" -#~ "untuk menyimpan informasi ini.\n" -#~ "\n" -#~ " * Delay Open Firmware: tak seperti LILO, ada dua macam delay tersedia " -#~ "di\n" -#~ "yaboot. Delay pertama diukur dalam detik dan di sini Anda bisa memilih " -#~ "CD,\n" -#~ "boot OF, MacOS, atau Linux.\n" -#~ "\n" -#~ " * Timeout Boot Kernel: timeout ini mirip delay boot LILO. Setelah " -#~ "memilih\n" -#~ "Linux, akan ada delay 0.1 detik sebelum kernel default Anda dipilih.\n" -#~ "\n" -#~ " * Aktifkan boot CD?: opsi ini memungkinkan Anda memilih \"C\" (CD) pada\n" -#~ "prompt boot pertama.\n" -#~ "\n" -#~ " * Aktifkan boot OF?: dg opsi ini Anda bisa memilih \"N\" (Open " -#~ "Firmware)\n" -#~ "saat prompt boot pertama.\n" -#~ "\n" -#~ " * OS Standar: Anda dapat memilih OS yang akan diboot secara default " -#~ "saat\n" -#~ "delay Open Firmware terlampaui." - -#~ msgid "" -#~ "Here are presented various parameters concerning your machine. Depending " -#~ "on\n" -#~ "your installed hardware, you may or not, see the following entries:\n" -#~ "\n" -#~ " * \"Mouse\": check the current mouse configuration and click on the " -#~ "button\n" -#~ "to change it if necessary;\n" -#~ "\n" -#~ " * \"Keyboard\": check the current keyboard map configuration and click " -#~ "on\n" -#~ "the button to change that if necessary;\n" -#~ "\n" -#~ " * \"Timezone\": DrakX, by default, guesses your time zone from the " -#~ "language\n" -#~ "you have chosen. But here again, as for the choice of a keyboard, you " -#~ "may\n" -#~ "not be in the country for which the chosen language should correspond.\n" -#~ "Hence, you may need to click on the \"Timezone\" button in order to\n" -#~ "configure the clock according to the time zone you are in;\n" -#~ "\n" -#~ " * \"Printer\": clicking on the \"No Printer\" button will open the " -#~ "printer\n" -#~ "configuration wizard;\n" -#~ "\n" -#~ " * \"Sound card\": if a sound card is detected on your system, it is\n" -#~ "displayed here. No modification possible at installation time;\n" -#~ "\n" -#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n" -#~ "here. No modification possible at installation time;\n" -#~ "\n" -#~ " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" -#~ "displayed here. You can click on the button to change the parameters\n" -#~ "associated with it." -#~ msgstr "" -#~ "Di sini disajikan macam-macam parameter mesin Anda. Tergantung hardware " -#~ "yg\n" -#~ "ter-instal, Anda dapat - atau tidak, melihat entri berikut:\n" -#~ "\n" -#~ " * \"Mouse\": cek konfigurasi mouse, klik tombol utk mengubahnya bila " -#~ "perlu\n" -#~ "\n" -#~ " * \"Keyboard\": cek konfigurasi map keyboard, klik tombol utk " -#~ "mengubahnya\n" -#~ "bila perlu.\n" -#~ "\n" -#~ " * \"Zona waktu\": DrakX menerka zona waktu Anda dari bahasa yg Anda " -#~ "pilih.\n" -#~ "Tapi sekali lagi seperti pilihan keyboard, Anda mungkin tak berada di " -#~ "negri\n" -#~ "yang selaras dg bahasa terpilih. Jadi Anda mungkin perlu menekan tombol\n" -#~ "\"Zona waktu\" utk mengkonfigurasikan jam sesuai zona waktu tempat Anda.\n" -#~ "\n" -#~ " * \"Printer\": klik \"No Printer\" utk membuka dukun konfigurasi " -#~ "printer.\n" -#~ "\n" -#~ " * \"Kartu suara\": kartu suara terdeteksi di sistem Anda akan " -#~ "ditampilkan\n" -#~ "di sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n" -#~ "\n" -#~ " * \"Kartu TV\": kartu TV yg terdeteksi di sistem Anda akan ditampilkan " -#~ "di\n" -#~ "sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n" -#~ "\n" -#~ " * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan " -#~ "ditampilkan\n" -#~ "di sini. Anda dapat meng-klik tombol utk mengubah parameternya." - -#~ msgid "Graphics card" -#~ msgstr "Kartu grafis" - -#~ msgid "Select a graphics card" -#~ msgstr "Pilih kartu grafis" - -#~ msgid "Choose a X driver" -#~ msgstr "Pilih driver X" - -#~ msgid "Standard VGA, 640x480 at 60 Hz" -#~ msgstr "VGA Standar, 640x480 pada 60 Hz" - -#~ msgid "Super VGA, 800x600 at 56 Hz" -#~ msgstr "VGA Super, 800x600 pada 56 Hz" - -#~ msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" -#~ msgstr "8514 Kompatibel, 1024x768 pada 87 Hz interlaced (no 800x600)" - -#~ msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" -#~ msgstr "VGA Super, 1024x768 pada 87 Hz interlaced, 800x600 pada 56 hz" - -#~ msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" -#~ msgstr "Extended Super VGA, 800x600 pada 60 Hz, 640x480 pada 72 Hz" - -#~ msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" -#~ msgstr "Non-Interlaced SVGA, 1024x768 pada 60 Hz, 800x600 pada 72 Hz" - -#~ msgid "High Frequency SVGA, 1024x768 at 70 Hz" -#~ msgstr "SVGA Frequensi Tinggi, 1024x768 pada 70 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 60 Hz" -#~ msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 60 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 74 Hz" -#~ msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 74 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 76 Hz" -#~ msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 76 Hz" - -#~ msgid "Monitor that can do 1600x1200 at 70 Hz" -#~ msgstr "Monitor yang dapat mencapai 1600x1200 pada 70 Hz" - -#~ msgid "Monitor that can do 1600x1200 at 76 Hz" -#~ msgstr "Monitor yang dapat mencapai 1600x1200 pada 76 Hz" - -#~ msgid "" -#~ "The total size for the groups you have selected is approximately %d MB.\n" -#~ msgstr "Ukuran total grup yang dipilih kira-kira %d MB.\n" - -#~ msgid "" -#~ "If you wish to install less than this size,\n" -#~ "select the percentage of packages that you want to install.\n" -#~ "\n" -#~ "A low percentage will install only the most important packages;\n" -#~ "a percentage of 100%% will install all selected packages." -#~ msgstr "" -#~ "Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n" -#~ "pilih dulu persentase paket yang hendak diinstall.\n" -#~ "\n" -#~ "Persentasi kecil berarti akan install paket yang penting-penting saja;\n" -#~ "dan sebaliknya persentase 100%% akan install semua paket yang tadi sudah\n" -#~ "dipilih" - -#~ msgid "" -#~ "You have space on your disk for only %d%% of these packages.\n" -#~ "\n" -#~ "If you wish to install less than this,\n" -#~ "select the percentage of packages that you want to install.\n" -#~ "A low percentage will install only the most important packages;\n" -#~ "a percentage of %d%% will install as many packages as possible." -#~ msgstr "" -#~ "Anda punya hard disk cuma cukup untuk sekitar %d%% dari seluruh " -#~ "paketini.\n" -#~ "\n" -#~ "Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n" -#~ "pilih dulu persentase paket yang hendak diinstall.\n" -#~ "Persentasi kecil berarti akan install paket yang penting-penting saja;\n" -#~ "dan sebaliknya persentase %d%% akan install paket yang tadi sudah\n" -#~ "dipilih sebanyak-banyaknya" - -#~ msgid "You will be able to choose them more specifically in the next step." -#~ msgstr "Anda akan bisa memilih dengan lebih lengkap nanti." - -#~ msgid "Percentage of packages to install" -#~ msgstr "Persentase paket yang akan diinstall" - -#~ msgid "Please choose the desired security level." -#~ msgstr "Pilih Tingkat Security" - -#~ msgid "Complete (%dMB)" -#~ msgstr "Lengkap (%dMB)" - -#~ msgid "Minimum (%dMB)" -#~ msgstr "Minimum (%dMB)" - -#~ msgid "Recommended (%dMB)" -#~ msgstr "Disarankan (%dMB)" - -#~ msgid "" -#~ "Is your printer a multi-function device from HP (OfficeJet, PSC, " -#~ "PhotoSmart, LaserJet 1100/1200/1220/3200/3300 with scanner)?" -#~ msgstr "" -#~ "Apakah printer Anda adalah alat multifungsi dari HP (OfficeJet, PSC, " -#~ "PhotoSmart LaserJet 1100/1200/1220/3200/3300 dengan scanner)?" - -#~ msgid "" -#~ "***********************************************************************\n" -#~ "\n" -#~ msgstr "" -#~ "***********************************************************************\n" -#~ "\n" - -#~ msgid "" -#~ "\n" -#~ "\n" -#~ "***********************************************************************\n" -#~ "\n" -#~ msgstr "" -#~ "\n" -#~ "\n" -#~ "***********************************************************************\n" -#~ "\n" - -#~ msgid "" -#~ "\n" -#~ "(!) FTP connexion problem: It was not possible to send your backup files " -#~ "by FTP.\n" -#~ msgstr "" -#~ "\n" -#~ "(!) problem koneksi FTP: Gagal mengirim file backup dengan FTP.\n" - -#~ msgid "(!) Error during mail sending. \n" -#~ msgstr "(!) Kesalahan saat pengiriman surat. \n" - -#~ msgid "USA (bcast)" -#~ msgstr "AS (siaran)" - -#~ msgid "China (bcast)" -#~ msgstr "Cina (siaran)" - -#~ msgid "Japan (bcast)" -#~ msgstr "Jepang (siaran)" - -#~ msgid "Utilities" -#~ msgstr "Peralatan" - -#~ msgid "Archiving, emulators, monitoring" -#~ msgstr "Arsip, emulator, pemantauan" - -#~ msgid "About" -#~ msgstr "Keterangan" - -#~ msgid " Help " -#~ msgstr " Pertolongan " - -#~ msgid "" -#~ "XawTV isn't installed ...\n" -#~ "You should install it.\n" -#~ " Just type \"urpmi xawtv\"" -#~ msgstr "" -#~ "XawTV belum diinstal,\n" -#~ "Anda harus menginstalnya.\n" -#~ " Ketikkan \"urpmi xawtv\"" - -#~ msgid "" -#~ "Can't access kernel modules corresponding to your kernel (file %s is " -#~ "missing)" -#~ msgstr "" -#~ "Tak dapat mengakses modul kernel yg sesuai dg kernel Anda (file %s hilang)" - -#~ msgid "None" -#~ msgstr "Tiada" - -#~ msgid "Choose a default printer!" -#~ msgstr "Pilih satu printer standar!" - -#~ msgid "Apply/Re-read printers" -#~ msgstr "Terapkan/Baca-ulang printer" - -#~ msgid "You may now provide options to module %s." -#~ msgstr "Sekarang Anda boleh berikan parameter untuk module %s." - -#~ msgid "Low" -#~ msgstr "Lemah" - -#~ msgid "" -#~ "Few improvements for this security level, the main one is that there are\n" -#~ "more security warnings and checks." -#~ msgstr "" -#~ "Ada beberapa peningkatan level security, yang utama adalah ada lebih " -#~ "banyak\n" -#~ "peringatan dan cek sekuriti yang lebih ketat." - -#~ msgid "mount failed" -#~ msgstr "gagal melakukan mount" - -#~ msgid "Export" -#~ msgstr "Ekspor" - -#~ msgid "click here" -#~ msgstr "klik di sini" - -#~ msgid "" -#~ "To know about the options available for the current printer read either " -#~ "the list shown below or click on the \"Print option list\" button. %s\n" -#~ "\n" -#~ msgstr "" -#~ "Untuk mengetahui opsi yg tersedia untuk printer ini bacalah daftar " -#~ "berikut atau klik tombol \"Daftar opsi cetak\". %s\n" -#~ "\n" - -#~ msgid "" -#~ "This %s scanner uses parallel port, which is unsupported for the moment" -#~ msgstr "Scanner %s memakai port paralel, yg tak disupport saat ini" - -#~ msgid "" -#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" -#~ "local time according to the time zone you selected." -#~ msgstr "" -#~ "GNU/Linux mengatur jam dengan GMT atawa \"Greenwich Mean Time\" dan \n" -#~ "menterjemahkannya ke waktu lokal sesuai dengan timezone yang Anda pilih." - -#~ msgid "" -#~ "You may choose to upload updated packages that have been released after " -#~ "the\n" -#~ "distribution has been made available. You will get security fixes or bug\n" -#~ "fixes, but you need to have an Internet connection configured to " -#~ "proceed.\n" -#~ "Answer \"Yes\" to the dialog to choose an available mirror. After " -#~ "choosing\n" -#~ "a mirror, a packages selection tree appears to allow you to choose " -#~ "packages\n" -#~ "individually, package that need to be updated are already selected, but " -#~ "you\n" -#~ "may choose to install other package or deselect packages. Press \"Install" -#~ "\"\n" -#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n" -#~ "*REALLY* need to be modified according to real DrakX, if you need other\n" -#~ "help section, let us (DrakX team developer) known)." -#~ msgstr "" -#~ "Anda dapat memilih upload paket terupdate yg dirilis setelah distribusi\n" -#~ "tersedia. Anda akan mendapat fix keamanan atau kutu, tapi Anda perlu " -#~ "punya\n" -#~ "koneksi Internet terkonfigurasi untuk melanjutkan proses. Jawab \"Ya\" " -#~ "pada\n" -#~ "dialog untuk memilih mirror. Setelah memilih mirror, pohon seleksi paket\n" -#~ "muncul agar Anda dapat memilih paket sendiri, paket yg perlu diupdate " -#~ "telah\n" -#~ "dipilihkan, tapi Anda dapat menginstal paket lain / melepas pilihan " -#~ "paket.\n" -#~ "Tekan \"Instal\" utk menginstal update paket atau \"Batal\" utk keluar.\n" -#~ "(ini *BENAR-BENAR* perlu dimodifikasi menurut DrakX nyata, jika Anda " -#~ "perlu\n" -#~ "pertolongan lain, beritahu kami tim developer DrakX)." - -#~ msgid "Connect to Internet" -#~ msgstr "Sambungkan koneksi Internet" - -#~ msgid "Disconnect from Internet" -#~ msgstr "Putuskan koneksi Internet" - -#~ msgid "Configure network connection (LAN or Internet)" -#~ msgstr "Konfigureasikan koneksi jaringan (LAN atau Internet)" - -#~ msgid "Scanning available nfs shared resource" -#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia" - -#~ msgid "Scanning available nfs shared resource of server %s" -#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia di server %s" - -#~ msgid "Scanning available samba shared resource" -#~ msgstr "Scan sumberdaya umum samba yg tersedia" - -#~ msgid "Scanning available samba shared resource of server %s" -#~ msgstr "Scan sumberdaya umum samba yg tersedia di server %s" - -#~ msgid "Active" -#~ msgstr "Aktif" - -#~ msgid "A printer, model \"%s\", has been detected on " -#~ msgstr "Printer dengan tipe \"%s\" telah terdeteksi di " - -#~ msgid "Local Printer Device" -#~ msgstr "Alat printer lokal" - -#~ msgid "Device/file name missing!" -#~ msgstr "Nama device/file hilang!" - -#~ msgid "Printer(s) on remote CUPS server(s)" -#~ msgstr "Printer di server CUPS remote" - -#~ msgid "Printer(s) on remote server(s)" -#~ msgstr "Printer di server remote" - -#~ msgid "Starting your connection..." -#~ msgstr "Mulai koneksi..." - -#~ msgid "Closing your connection..." -#~ msgstr "Tutup koneksi..." - -#~ msgid "" -#~ "The connection is not closed.\n" -#~ "Try to do it manually by running\n" -#~ "/etc/sysconfig/network-scripts/net_cnx_down\n" -#~ "in root." -#~ msgstr "" -#~ "Koneksi belum ditutup.\n" -#~ "Cobalah lakukan secara manual sebagai root lalu ketikkan\n" -#~ "/etc/sysconfig/network-scripts/net_cnx_down" - -#~ msgid "The system is now disconnected." -#~ msgstr "Sistem ini sekarang diputus koneksinya" - -#~ msgid "Choose the size you want to install" -#~ msgstr "Pilih ukuran yang akan diinstal" - -#~ msgid "Total size: " -#~ msgstr "Ukuran total: " - -#~ msgid "Please wait, " -#~ msgstr "Silakan tunggu, " - -#~ msgid "Total time " -#~ msgstr "Total waktu " - -#~ msgid "Use existing configuration for X11?" -#~ msgstr "Gunakan konfigurasi X11 yang ada?" - -#~ msgid "" -#~ "What device is your printer connected to \n" -#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n" -#~ msgstr "" -#~ "Device mana yang terhubung ke printer\n" -#~ "(ingat, /dev/lp0 = LPT1:) ?\n" - -#~ msgid "" -#~ "Warning, the network adapter is already configured. I will reconfigure it." -#~ msgstr "" -#~ "Awas, adaptor jaringan sudah dikonfigurasikan. Akan dikonfigurasikan lagi." - -#~ msgid "Remote" -#~ msgstr "Remote" - -#~ msgid "" -#~ "Please click on a button above\n" -#~ "\n" -#~ "Or use \"New\"" -#~ msgstr "" -#~ "Klik tombol di atas\n" -#~ "\n" -#~ "Atau gunakan \"Baru\"" - -#~ msgid "Use \"New\"" -#~ msgstr "Gunakan \"Baru\"" - -#~ msgid "If the list above doesn't contain the wanted entry, enter it here:" -#~ msgstr "" -#~ "Jika daftar di atas tak memuat isian yg diinginkan, masukkan di sini:" - -#~ msgid "Shared resource" -#~ msgstr "Sumberdaya umum" - -#~ msgid "Ambiguity (%s), be more precise\n" -#~ msgstr "Tak jelas (%s), coba lebih detil\n" - -#~ msgid "Your choice? (default %s enter `none' for none) " -#~ msgstr "Pilihan Anda? (default %s pilih 'none' untuk tidak ada) " - -#~ msgid "can not open /etc/sysconfig/autologin for reading: %s" -#~ msgstr "gagal baca file /etc/sysconfig/autologin: %s" - -#~ msgid "Do you want to restart the network" -#~ msgstr "Anda ingin restart network?" - -#~ msgid "" -#~ "\n" -#~ "Do you agree?" -#~ msgstr "" -#~ "\n" -#~ "Setuju?" - -#~ msgid "I'm about to restart the network device:\n" -#~ msgstr "Saya akan me-restart device jaringan ini:\n" - -#~ msgid "I'm about to restart the network device %s. Do you agree?" -#~ msgstr "Device jaringan %s akan di-restart. Setuju ?" - -#~ msgid "" -#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" -#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." -#~ msgstr "" -#~ "Kecuali Anda tahu yg lain, umumnya dipilih \"/dev/hda\"\n" -#~ "(disk IDE master primer) atau \"/dev/sda\" (disk SCSI pertama)." - -#~ msgid "" -#~ "The following printers are configured.\n" -#~ "You can add some more or modify the existing ones." -#~ msgstr "" -#~ "Printer berikut telah dikonfigurasi.\n" -#~ "Anda boleh tambahkan atau mengubah yang sudah ada." - -#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]" -#~ msgstr "Timeout koneksi (detik) [ beta, belum diterapkan ]" - -#~ msgid "Could not set \"%s\" as the default printer!" -#~ msgstr "Gagal set \"%s\" sbg printer default!" - -#~ msgid "Spooler: " -#~ msgstr "Spooler: " - -#~ msgid "Test the mouse here." -#~ msgstr "Silakan tes mouse Anda" - -#~ msgid "" -#~ "Please choose your preferred language for installation and system usage." -#~ msgstr "Pilihlan bahasa yang ingin Anda gunakan untuk instalasi dan sistem." - -#~ msgid "" -#~ "You need to accept the terms of the above license to continue " -#~ "installation.\n" -#~ "\n" -#~ "\n" -#~ "Please click on \"Accept\" if you agree with its terms.\n" -#~ "\n" -#~ "\n" -#~ "Please click on \"Refuse\" if you disagree with its terms. Installation " -#~ "will end without modifying your current\n" -#~ "configuration." -#~ msgstr "" -#~ "Anda harus menerima ketentuan dalam lisensi di atas untuk melanjutkan " -#~ "proses instalasi.\n" -#~ "\n" -#~ "\n" -#~ "Silakan tekan \"Terima\" bila Anda setuju dengan persyaratan di atas.\n" -#~ "\n" -#~ "\n" -#~ "dan silakan tekan \"Tolak\" bila Anda tidak setuju. Proses instalasi akan " -#~ "dihentikan tanpa mengubah konfigurasi yang sudah ada." - -#~ msgid "Choose the layout corresponding to your keyboard from the list above" -#~ msgstr "Pilih layout keyboard yg dipakai dari daftar di atas" - -#~ msgid "" -#~ "If you wish other languages (than the one you choose at\n" -#~ "beginning of installation) will be available after installation, please " -#~ "chose\n" -#~ "them in list above. If you want select all, you just need to select \"All" -#~ "\"." -#~ msgstr "" -#~ "Bila Anda menginginkan bahasa-bahasa lain selain bahasa yang Anda tadi " -#~ "pilih pada saat setelah instalasi, silakan pilih pada daftar di atas. " -#~ "Bila Anda mau semuanya, pilih saja \"Semuanya\"." - -#~ msgid "" -#~ "Select:\n" -#~ "\n" -#~ " - Customized: If you are familiar enough with GNU/Linux, you may then " -#~ "choose\n" -#~ " the primary usage for your machine. See below for details.\n" -#~ "\n" -#~ "\n" -#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" -#~ " perform a highly customized installation. As for a \"Customized\"\n" -#~ " installation class, you will be able to select the usage for your " -#~ "system.\n" -#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " -#~ "DOING!" -#~ msgstr "" -#~ "Pilih:\n" -#~ "\n" -#~ " - Customized: Bila Anda familiar dengan Linux, Anda akan dapat\n" -#~ " memilih penggunaan sistem ini, yaitu normal, development, atau server.\n" -#~ " Pilih \"Normal\" untuk instalasi secara umum yang biasanya. Atau pilih\n" -#~ " \"Development\" untuk membuat software dengan Linux Anda, atau pilih\n" -#~ " \"Server\" bila hendak menginstall server serbaguna (mail, print, dsb)\n" -#~ "\n" -#~ "\n" -#~ " - Ahli : Bila Anda sangat dekat dengan GNU/Linux dan ingin\n" -#~ " menginstall Linux sesuka hati, ini adalah kelas instalasi yang pas\n" -#~ " untuk Anda, dan Anda bisa memilih penggunaan sistem ini sebagaimana\n" -#~ " pada kelas \"Customized\". JANGAN COBA-COBA PAKAI MODUS INI KALAU\n" -#~ " belum cukup makan asam garam di dunia LINUX" - -#~ msgid "" -#~ "You must now define your machine usage. Choices are:\n" -#~ "\n" -#~ "* Workstation: this the ideal choice if you intend to use your machine " -#~ "primarily for everyday use, at office or\n" -#~ " at home.\n" -#~ "\n" -#~ "\n" -#~ "* Development: if you intend to use your machine primarily for software " -#~ "development, it is the good choice. You\n" -#~ " will then have a complete collection of software installed in order to " -#~ "compile, debug and format source code,\n" -#~ " or create software packages.\n" -#~ "\n" -#~ "\n" -#~ "* Server: if you intend to use this machine as a server, it is the good " -#~ "choice. Either a file server (NFS or\n" -#~ " SMB), a print server (Unix style or Microsoft Windows style), an " -#~ "authentication server (NIS), a database\n" -#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, " -#~ "etc.) to be installed." -#~ msgstr "" -#~ "Berikut adalah pilihan penggunaan mesin Anda :\n" -#~ "\n" -#~ "*Workstation: pilih ini kalau Anda hendak menggunakan mesin Anda untuk " -#~ "mengerjakan\n" -#~ " pekerjaan sehari-hari di kantor atau di rumah\n" -#~ "\n" -#~ "\n" -#~ "* Development: pilih ini bila Anda hendak menggunakan mesin ini untuk " -#~ "pembuatan software.\n" -#~ " Anda akan saya kasih kumpulan software yang berguna untuk melakukan " -#~ "kompilasi,\n" -#~ " debug, dan format source code, atau untuk membuat paket software\n" -#~ "\n" -#~ "\n" -#~ "* Server : Pilih ini bila Anda hendak menggunakan mesin ini sebagai\n" -#~ " server. Entah itu file server (NFS ataw SMB), print server\n" -#~ " (pakai protokol Unix lp (Line Printer) atau model windows SMB)\n" -#~ " authentication server (NIS), database server dsb dsb.\n" -#~ " Karena itu jangan mengharapken saya menyediakan rupa-rupa\n" -#~ " software yang ngejreng (KDE,GNOME...) di sini." - -#~ msgid "" -#~ "You may now select the group of packages you wish to\n" -#~ "install or upgrade.\n" -#~ "\n" -#~ "\n" -#~ "DrakX will then check whether you have enough room to install them all. " -#~ "If not,\n" -#~ "it will warn you about it. If you want to go on anyway, it will proceed " -#~ "onto the\n" -#~ "installation of all selected groups but will drop some packages of " -#~ "lesser\n" -#~ "interest. At the bottom of the list you can select the option \n" -#~ "\"Individual package selection\"; in this case you will have to browse " -#~ "through\n" -#~ "more than 1000 packages..." -#~ msgstr "" -#~ "Sekarang Anda pilih dulu grup paket yang mau Anda install\n" -#~ "atau yang mau diupgrade.\n" -#~ "\n" -#~ "DrakX sekarang akan cek apakah Anda masih punya sisa space kosong untuk\n" -#~ "menginstall ini semua, kalau tidak nanti Anda akan diberitahu kok.\n" -#~ "Tapi kalau Anda mau cuek aja mau install walaupun spacenya tidak cukup\n" -#~ "gua akan menginstall semua paketnya, tapi ada beberapa paket yang aku " -#~ "rasa\n" -#~ "kurang penting akan tidak diinstall. Pada daftar di bawah ini Anda bisa\n" -#~ "pilih \"Pilih paket sendiri\"; kalau-kalau Anda pingin melihat \n" -#~ "paket-paket yang ada (ada 1000an lebih...)" - -#~ msgid "" -#~ "You can now choose individually all the packages you\n" -#~ "wish to install.\n" -#~ "\n" -#~ "\n" -#~ "You can expand or collapse the tree by clicking on options in the left " -#~ "corner of\n" -#~ "the packages window.\n" -#~ "\n" -#~ "\n" -#~ "If you prefer to see packages sorted in alphabetic order, click on the " -#~ "icon\n" -#~ "\"Toggle flat and group sorted\".\n" -#~ "\n" -#~ "\n" -#~ "If you want not to be warned on dependencies, click on \"Automatic\n" -#~ "dependencies\". If you do this, note that unselecting one package may " -#~ "silently\n" -#~ "unselect several other packages which depend on it." -#~ msgstr "" -#~ "Anda dapat memilih tiap-tiap paket yang hendak Anda install\n" -#~ "\n" -#~ "\n" -#~ "Anda dapat membuka atau menutup tree dengan mengklik pada pilihan di " -#~ "sudut kiri pada\n" -#~ "windows paket\n" -#~ "\n" -#~ "\n" -#~ "Bila Anda hendak melihat daftar paket yang diurut secara alfabet, pilih " -#~ "ikon \"Togel flat dan urut grup\".\n" -#~ "\n" -#~ "\n" -#~ "Bila Anda tidak hendak diberitahu tentang dependensi paket, pilih " -#~ "\"Dependensi otomatis\"\n" -#~ "Dengan cara ini bila Anda membuang suatu paket, maka paket-paket terkait " -#~ "lainnya akan dibuang\n" -#~ "juga secara otomatis tanpa pemberitahuan." - -#~ msgid "" -#~ "If you have all the CDs in the list above, click Ok. If you have\n" -#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect " -#~ "them,\n" -#~ "then click Ok." -#~ msgstr "" -#~ "Kalau Anda punya semua CD pada daftar di atas, tekan OK.\n" -#~ "Kalau tidak punya sama sekali, click Baal.\n" -#~ "Kalau cuma punya beberapa aja, pilih aja, trus klik Ok." - -#~ msgid "" -#~ "You can now test your mouse. Use buttons and wheel to verify\n" -#~ "if settings are good. If not, you can click on \"Cancel\" to choose " -#~ "another\n" -#~ "driver.\n" -#~ "\n" -#~ "\n" -#~ "If you are installing on an Apple machine with a 1-button mouse, you " -#~ "will\n" -#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n" -#~ "and 3rd mouse buttons. This will allow you to be able to access the " -#~ "full\n" -#~ "functionality of the mouse in both the Linux console and the X Window " -#~ "GUI.\n" -#~ "\n" -#~ "\n" -#~ "If you have an ADB mouse, please select USB, as the Linux kernel will " -#~ "take\n" -#~ "care of mapping your mouse hardware correctly." -#~ msgstr "" -#~ "Anda kini dapat mencoba mouse. Gunakan tombol dan roda utk mencek\n" -#~ "setting. Jika hasilnya buruk, klik \"Batal\" utk memilih driver lain.\n" -#~ "\n" -#~ "\n" -#~ "Jika Anda sedang menginstal mesin Apple dg mouse 1-tombol, ada " -#~ "kesempatan\n" -#~ "mendefinisikan keyboard utk mengemulasi tombol ke-2 dan ke-3.\n" -#~ "Ini menjadikan Anda dapat mengakses fungsi penuh mouse dalam\n" -#~ "konsol Linux dan GUI Window X.\n" -#~ "\n" -#~ "\n" -#~ "Jika Anda punya mouse ADB, pilihlah USB, karena kernel Linux akan " -#~ "melakukan\n" -#~ "mapping hardware mouse Anda." - -#~ msgid "" -#~ "If you wish to connect your computer to the Internet or\n" -#~ "to a local network please choose the correct option. Please turn on your " -#~ "device\n" -#~ "before choosing the correct option to let DrakX detect it automatically.\n" -#~ "\n" -#~ "\n" -#~ "If you do not have any connection to the Internet or a local network, " -#~ "choose\n" -#~ "\"Disable networking\".\n" -#~ "\n" -#~ "\n" -#~ "If you wish to configure the network later after installation, or if you " -#~ "have\n" -#~ "finished to configure your network connection, choose \"Done\"." -#~ msgstr "" -#~ "Bila Anda hendak menghubungkan komputer ini ke Internet atau ke jaringan\n" -#~ "lokal, silakan pilih konfigurasi yang benar. Nyalakan perangkat terkait " -#~ "sebelum\n" -#~ "memilih konfigurasi agar dapat dideteksi oleh DrakX secara otomatis.\n" -#~ "\n" -#~ "\n" -#~ "BIla anda tidak memiliki koneksi ke Internet atau jaringan lokal, pilih " -#~ "saja\n" -#~ "\"Matikan Jaringan\".\n" -#~ "\n" -#~ "\n" -#~ "Bila Anda hendak mengkonfigurasikan jaringan nanti setelah proses " -#~ "instalasi selesai,atau bila Anda sudah selesai mengkonfigurasikan koneksi " -#~ "jaringan, pilih \"Selesai\"." - -#~ msgid "" -#~ "No modem has been detected. Please select the serial port on which it is " -#~ "plugged.\n" -#~ "\n" -#~ "\n" -#~ "For information, the first serial port (called \"COM1\" under Microsoft\n" -#~ "Windows) is called \"ttyS0\" under Linux." -#~ msgstr "" -#~ "Saya tidak dapat menemukan modem di komputer ini. Silakan pilih port " -#~ "serial mana\n" -#~ "modem Anda dicolokkan.\n" -#~ "\n" -#~ "\n" -#~ "sebagai misal, port serial pertama (pada Microsoft windows dikenal dengan " -#~ "\"COM1\")\n" -#~ "adalah \"ttyS0\" di GNU/Linux." - -#~ msgid "" -#~ "You may now enter dialup options. If you don't know\n" -#~ "or are not sure what to enter, the correct informations can be obtained " -#~ "from\n" -#~ "your Internet Service Provider. If you do not enter the DNS (name " -#~ "server)\n" -#~ "information here, this information will be obtained from your Internet " -#~ "Service\n" -#~ "Provider at connection time." -#~ msgstr "" -#~ "Sekarang Anda bisa memasukan pilihan dialup. Bila Anda tidak tahu\n" -#~ "atau ragu-ragu, informasi yang benar bisa Anda tanyakan kepada\n" -#~ "Internet Service Provider tempat Anda berlangganan. Bila Anda tidak\n" -#~ "memasukan DNS (name server) di sini, informasi tersebut akan\n" -#~ "saya cari sendiri pada Internet Service Provider Anda saat melakukan " -#~ "koneksi nanti." - -#~ msgid "" -#~ "If your modem is an external modem, please turn on it now to let DrakX " -#~ "detect it automatically." -#~ msgstr "" -#~ "Bila modem yang Anda punya adalah modem eksternal, maka tolong dong " -#~ "dinyalakan supaya DrakXbisa mendeteksinya secara otomatis." - -#~ msgid "Please turn on your modem and choose the correct one." -#~ msgstr "Silakan nyalakan modemnya dan pilih mana modem yang Anda punya" - -#~ msgid "" -#~ "If you are not sure if informations above are\n" -#~ "correct or if you don't know or are not sure what to enter, the correct\n" -#~ "informations can be obtained from your Internet Service Provider. If you " -#~ "do not\n" -#~ "enter the DNS (name server) information here, this information will be " -#~ "obtained\n" -#~ "from your Internet Service Provider at connection time." -#~ msgstr "" -#~ "Bila Anda tidak yakin dengan informasi di atas apakah benar atau tidak\n" -#~ "atau bahkan bila Anda sangat tidak tahu atau ragu mau isi apa, tenang " -#~ "saja\n" -#~ "informasi di atas bisa Anda tanyakan kepada Internet Service Provider " -#~ "Anda.\n" -#~ "Bila Anda tidak mengisi DNS (name server) di sini, nanti akan saya cari " -#~ "sendiri\n" -#~ "dari Internet Service Provider saat melakukan koneksi ke Internet." - -#~ msgid "" -#~ "You may now enter your host name if needed. If you\n" -#~ "don't know or are not sure what to enter, the correct informations can " -#~ "be\n" -#~ "obtained from your Internet Service Provider." -#~ msgstr "" -#~ "Anda bisa masukkan nama host Anda sekarang. Bila Anda tidak yakin apa " -#~ "yang harus dimasukkan,\n" -#~ "informasi ini bisa diperoleh dari ISP." - -#~ msgid "" -#~ "You may now configure your network device.\n" -#~ "\n" -#~ " * IP address: if you don't know or are not sure what to enter, ask " -#~ "your network administrator.\n" -#~ " You should not enter an IP address if you select the option " -#~ "\"Automatic IP\" below.\n" -#~ "\n" -#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't " -#~ "know or are not sure what to enter,\n" -#~ " ask your network administrator.\n" -#~ "\n" -#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select " -#~ "this option. If selected, no value is needed in\n" -#~ " \"IP address\". If you don't know or are not sure if you need to " -#~ "select this option, ask your network administrator." -#~ msgstr "" -#~ "Silakan konfigurasikan device jaringan Anda:\n" -#~ "\n" -#~ " * Alamat IP: Kalau Anda tak tahu, tanyakan sana pada network " -#~ "administratornya.\n" -#~ " Jangan masukkan alamat IP kalau Anda pilih \"IP Otomatis\" di " -#~ "bawah.\n" -#~ "\n" -#~ "\n" -#~ " - Netmask: Pilih aja \"255.255.255.0\", kecuali kalau ragu tanya juga " -#~ "ke\n" -#~ " network administratornya.\n" -#~ "\n" -#~ "\n" -#~ " - IP otomatis: Bila network Anda menggunakan bootp atau protokol dhcp, " -#~ "pilih\n" -#~ " ini. Bila Anda pilih ini, tak usah masukkan alamat IP di \"Alamat IP\". " -#~ "Bila\n" -#~ " Anda ragu juga, tanya lagi ke network administrator." - -#~ msgid "" -#~ "You may now enter your host name if needed. If you\n" -#~ "don't know or are not sure what to enter, ask your network administrator." -#~ msgstr "" -#~ "Anda sekarang bisa memasukan nama host. Bila Anda tidak tahu atau ragu\n" -#~ "silakan kontak network administrator Anda saja." - -#~ msgid "" -#~ "You may now enter your host name if needed. If you\n" -#~ "don't know or are not sure what to enter, leave blank." -#~ msgstr "" -#~ "Sekarang Anda boleh memasukan nama host. Bila tidak tahu\n" -#~ "atau tidak pasti, kosongkan saja deh." - -#~ msgid "" -#~ "You may now enter dialup options. If you're not sure what to enter, the\n" -#~ "correct information can be obtained from your ISP." -#~ msgstr "" -#~ "Anda bisa masukkan dialup sekarang. Bila Anda tak yakin apa yang harus " -#~ "dimasukkan,\n" -#~ "informasi ini bisa diperoleh dari ISP." - -#~ msgid "" -#~ "If you will use proxies, please configure them now. If you don't know if\n" -#~ "you should use proxies, ask your network administrator or your ISP." -#~ msgstr "" -#~ "Bila Anda mau pakai proxy, sekarang saatnya untuk mengkonfigurasi. Bila " -#~ "Anda\n" -#~ "tak tahu pakai proxy apa tak, tanya gih ke network administratornya atau " -#~ "ISP." - -#~ msgid "" -#~ "You can install cryptographic package if your internet connection has " -#~ "been\n" -#~ "set up correctly. First choose a mirror where you wish to download " -#~ "packages and\n" -#~ "after that select the packages to install.\n" -#~ "\n" -#~ "\n" -#~ "Note you have to select mirror and cryptographic packages according\n" -#~ "to your legislation." -#~ msgstr "" -#~ "Anda bisa install paket kriptografi bila koneksi Internet Anda telah\n" -#~ "dikonfig dengan benar. Sekarang pilih mirror tempat Anda ingin download\n" -#~ "paket kriptografinya dan kemudian pilih paketnya.\n" -#~ "\n" -#~ "Perhatikan bahwa Anda harus pilih mirror dan kriptografi sesuai " -#~ "ketentuan\n" -#~ "yang berlaku di daerah Anda." - -#~ msgid "You can now select your timezone according to where you live." -#~ msgstr "Sekarang pilih zonawaktu tempat Anda tinggal" - -#~ msgid "" -#~ "You can configure a local printer (connected to your computer) or remote\n" -#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)." -#~ msgstr "" -#~ "Sekarang Anda bisa mengkonfigurasikan printer lokal (terhubung ke " -#~ "komputer Anda) atau\n" -#~ "printer remote (yang diakses via jaringan Unix, Netware, atau Microsoft " -#~ "windows)." - -#~ msgid "" -#~ "If you wish to be able to print, please choose one printing system " -#~ "between\n" -#~ "CUPS and LPR.\n" -#~ "\n" -#~ "\n" -#~ "CUPS is a new, powerful and flexible printing system for Unix systems " -#~ "(CUPS\n" -#~ "means \"Common Unix Printing System\"). It is the default printing system " -#~ "in\n" -#~ "Mandrake Linux.\n" -#~ "\n" -#~ "\n" -#~ "LPR is the old printing system used in previous Mandrake Linux " -#~ "distributions.\n" -#~ "\n" -#~ "\n" -#~ "If you don't have printer, click on \"None\"." -#~ msgstr "" -#~ "Bila Anda ingin dapat mencetak, silakan pilih sistem cetak CUPS atau LPR\n" -#~ "\n" -#~ "\n" -#~ "CUPS adalah sistem cetak baru dan powerful di Unix (CUPS = \"Common Unix\n" -#~ "Printing System\"). Ini adalah sistem cetak standar Linux Mandrake.\n" -#~ "\n" -#~ "\n" -#~ "LPR adalah sistem cetak kuno, masih dipakai pada versi lama Linux " -#~ "Mandrake.\n" -#~ "\n" -#~ "\n" -#~ "Bila Anda tak punya printer, pilih \"Tidak Ada\"" - -#~ msgid "" -#~ "GNU/Linux can deal with many types of printer. Each of these types " -#~ "requires\n" -#~ "a different setup.\n" -#~ "\n" -#~ "\n" -#~ "If your printer is physically connected to your computer, select \"Local\n" -#~ "printer\".\n" -#~ "\n" -#~ "\n" -#~ "If you want to access a printer located on a remote Unix machine, select\n" -#~ "\"Remote printer\".\n" -#~ "\n" -#~ "\n" -#~ "If you want to access a printer located on a remote Microsoft Windows " -#~ "machine\n" -#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"." -#~ msgstr "" -#~ "GNU/Linux dapat menggunakan berbagai jenis printer. Tiap-tiap tipe " -#~ "memerlukan setup\n" -#~ "yang berbeda\n" -#~ "\n" -#~ "\n" -#~ "Bila printer tersambung secara fisik dalam komputer ini, pilih\n" -#~ "\"Printer Lokal\". \n" -#~ "\n" -#~ "Bila Anda menggunakan printer Unix jarak jauh, pilih\n" -#~ "\"Printer remote\".\n" -#~ "\n" -#~ "\n" -#~ "Bila Anda hendak menggunakan printer pada mesin Microsoft windows (atau\n" -#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\"." - -#~ msgid "" -#~ "Please turn on your printer before continuing to let DrakX detect it.\n" -#~ "\n" -#~ "You have to enter some informations here.\n" -#~ "\n" -#~ "\n" -#~ " * Name of printer: the print spooler uses \"lp\" as default printer " -#~ "name. So, you must have a printer named \"lp\".\n" -#~ " If you have only one printer, you can use several names for it. You " -#~ "just need to separate them by a pipe\n" -#~ " character (a \"|\"). So, if you prefer a more meaningful name, you " -#~ "have to put it first, eg: \"My printer|lp\".\n" -#~ " The printer having \"lp\" in its name(s) will be the default " -#~ "printer.\n" -#~ "\n" -#~ "\n" -#~ " * Description: this is optional but can be useful if several printers " -#~ "are connected to your computer or if you allow\n" -#~ " other computers to access to this printer.\n" -#~ "\n" -#~ "\n" -#~ " * Location: if you want to put some information on your\n" -#~ " printer location, put it here (you are free to write what\n" -#~ " you want, for example \"2nd floor\").\n" -#~ msgstr "" -#~ "Silakan nyalakan printer sebelum DrakX mendeteksinya.\n" -#~ "\n" -#~ "Anda perlu mengisi beberapa informasi di sini.\n" -#~ "\n" -#~ "\n" -#~ " * Nama printer: spooler cetak menggunakan nama \"lp\" sebagai nama " -#~ "printer default\n" -#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda " -#~ "memiliki cuma \n" -#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan " -#~ "saja nama\n" -#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama " -#~ "printer dengan\n" -#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n" -#~ " Printer yang memiliki \"lp\" pada namanya akan menjadi printer " -#~ "default.\n" -#~ "\n" -#~ "\n" -#~ " * Deskripsi: ini boleh diisi boleh tidak, tapi bila diisi akan lebih " -#~ "memudahkan Anda\n" -#~ "untuk membedakan antara printer bila Anda memiliki printer lebih dari " -#~ "satu buah atau bila\n" -#~ "printer ini akan diakses oleh banyak orang.\n" -#~ "\n" -#~ "\n" -#~ " * Lokasi: Anda bisa menuliskan informasi lebih detil tentang lokasi " -#~ "printer ini.\n" -#~ "(misalnya \"Printer yang ada di lantai 2\").\n" - -#~ msgid "" -#~ "You need to enter some informations here.\n" -#~ "\n" -#~ "\n" -#~ " * Name of queue: the print spooler uses \"lp\" as default printer " -#~ "name. So, you need have a printer named \"lp\".\n" -#~ " If you have only one printer, you can use several names for it. You " -#~ "just need to separate them by a pipe\n" -#~ " character (a \"|\"). So, if you prefer to have a more meaningful " -#~ "name, you have to put it first, eg: \"My printer|lp\".\n" -#~ " The printer having \"lp\" in its name(s) will be the default " -#~ "printer.\n" -#~ "\n" -#~ " \n" -#~ " * Spool directory: it is in this directory that printing jobs are " -#~ "stored. Keep the default choice\n" -#~ " if you don't know what to use\n" -#~ "\n" -#~ "\n" -#~ " * Printer Connection: If your printer is physically connected to your " -#~ "computer, select \"Local printer\".\n" -#~ " If you want to access a printer located on a remote Unix machine, " -#~ "select \"Remote lpd printer\".\n" -#~ "\n" -#~ "\n" -#~ " If you want to access a printer located on a remote Microsoft " -#~ "Windows machine (or on Unix machine using SMB\n" -#~ " protocol), select \"SMB/Windows 95/98/NT\".\n" -#~ "\n" -#~ "\n" -#~ " If you want to acces a printer located on NetWare network, select " -#~ "\"NetWare\".\n" -#~ msgstr "" -#~ "Anda perlu memasukkan beberapa informasi di sini.\n" -#~ "\n" -#~ "\n" -#~ " * Nama antrian: spooler cetak menggunakan nama \"lp\" sebagai nama " -#~ "printer default\n" -#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda " -#~ "memiliki cuma \n" -#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan " -#~ "saja nama\n" -#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama " -#~ "printer dengan\n" -#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n" -#~ " Printer yang memiliki \"lp\" pada namanya akan menjadi printer " -#~ "default.\n" -#~ "\n" -#~ "\n" -#~ " * Direktori Spool: Dalam direktori ini semua job printer akan " -#~ "disimpan. BIla Anda tidak\n" -#~ "mengerti biarkan saja terisi dalam nilai defaultnya.\n" -#~ "\n" -#~ "\n" -#~ " * Koneksi Printer: Bila printer tersambung secara fisik dalam komputer " -#~ "ini, pilih\n" -#~ "\"Printer Lokal\". Namun bila Anda menggunakan printer Unix jarak jauh, " -#~ "pilih\n" -#~ "\"Printer lpd remote\".\n" -#~ "\n" -#~ "\n" -#~ " Bila Anda hendak menggunakan printer pada mesin Microsoft windows " -#~ "(atau\n" -#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\".\n" -#~ "\n" -#~ "\n" -#~ " Bila Anda hendak mengakses printer pada jaringan Netware, pilih " -#~ "\"Netware\".\n" - -#~ msgid "" -#~ "Your printer has not been detected. Please enter the name of the device " -#~ "on\n" -#~ "which it is connected.\n" -#~ "\n" -#~ "\n" -#~ "For information, most printers are connected on the first parallel port. " -#~ "This\n" -#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft " -#~ "Windows." -#~ msgstr "" -#~ "Printer Anda tidak dapat dideteksi. Silakan tuliskan nama device atau di " -#~ "mana printer Anda\n" -#~ "tersambung.\n" -#~ "\n" -#~ "\n" -#~ "Sebagai contoh, printer yang disambung ke port paralel pertama komputer " -#~ "disebut\n" -#~ "\"/dev/lp0\" pada GNU/Linux, dan disebut \"LPT1\" pada wicrosoft mindows." - -#~ msgid "You must now select your printer in the above list." -#~ msgstr "Anda harus pilih printer yang Anda punya pada daftar di atas." - -#~ msgid "" -#~ "Please select the right options according to your printer.\n" -#~ "Please see its documentation if you don't know what choose here.\n" -#~ "\n" -#~ "\n" -#~ "You will be able to test your configuration in next step and you will be " -#~ "able to modify it if it doesn't work as you want." -#~ msgstr "" -#~ "Silakan pilih konfigurasi yang tepat bergantung tipe printer yang Anda " -#~ "punya.\n" -#~ "Silakan baca dokumentasinya bila Anda tidak tahu harus pilih apa di " -#~ "sini.\n" -#~ "\n" -#~ "\n" -#~ "Anda akan dapat melakukan test pada konfigurasi ini nanti dan bisa juga\n" -#~ "mengubah konfigurasi ini bila tidak berjalan sebagaimana mestinya." - -#~ msgid "" -#~ "You can now enter the root password for your Mandrake Linux system.\n" -#~ "The password must be entered twice to verify that both password entries " -#~ "are identical.\n" -#~ "\n" -#~ "\n" -#~ "Root is the system's administrator and is the only user allowed to modify " -#~ "the\n" -#~ "system configuration. Therefore, choose this password carefully. \n" -#~ "Unauthorized use of the root account can be extemely dangerous to the " -#~ "integrity\n" -#~ "of the system, its data and other system connected to it.\n" -#~ "\n" -#~ "\n" -#~ "The password should be a mixture of alphanumeric characters and at least " -#~ "8\n" -#~ "characters long. It should never be written down.\n" -#~ "\n" -#~ "\n" -#~ "Do not make the password too long or complicated, though: you must be " -#~ "able to\n" -#~ "remember it without too much effort." -#~ msgstr "" -#~ "Sekarang Anda mesti berikan katasandi root untuk\n" -#~ "sistem Linux-Mandrake ini. Katasandi harus diketikkan dua kali untuk\n" -#~ "verifikasi bahwa Anda tidak salah ketik.\n" -#~ "\n" -#~ "\n" -#~ "Root adalah administrator sistem. Hanya orang yang punya akses ke\n" -#~ "account administrator saja yang dapat mengatur dan mengelola sistem.\n" -#~ "Awas, account administrator yang disalahgunakan atau dipakai\n" -#~ "tanpa izin akan sangat membahayakan integritas sistem, data,\n" -#~ "dan sistem lain yang terhubung. \n" -#~ "\n" -#~ "\n" -#~ "Katasandi haruslah campuran dari\n" -#~ "karakter alfanumerik dan panjangnya minimal 8 karakter. Jangan\n" -#~ "pernah menuliskan katasandi Anda di kertas atau di mana saja. \n" -#~ "\n" -#~ "Jangan buat katasandi Anda terlalu panjang atau rumit, nanti bisa lupa." - -#~ msgid "" -#~ "If your network uses the LDAP (or NIS) protocol for authentication, " -#~ "select\n" -#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your " -#~ "network\n" -#~ "administrator.\n" -#~ "\n" -#~ "If your computer is not connected to any administrated network, you may " -#~ "want to\n" -#~ "choose \"Local files\" for authentication." -#~ msgstr "" -#~ "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih\n" -#~ "\"LDAP\" (atau \"NIS\") . Jika Anda tak tahu, tanyalah admin jaringan " -#~ "Anda.\n" -#~ "\n" -#~ "Jika komputer tak terhubung jaringan, Anda dapat memilih\n" -#~ "\"File lokal\" utk otentikasi." - -#~ msgid "" -#~ "You may now create one or more \"regular\" user account(s), as\n" -#~ "opposed to the \"privileged\" user account, root. You can create\n" -#~ "one or more account(s) for each person you want to allow to use\n" -#~ "the computer. Note that each user account will have its own\n" -#~ "preferences (graphical environment, program settings, etc.)\n" -#~ "and its own \"home directory\", in which these preferences are\n" -#~ "stored.\n" -#~ "\n" -#~ "\n" -#~ "First of all, create an account for yourself! Even if you will be the " -#~ "only user\n" -#~ "of the machine, you may NOT connect as root for daily use of the system: " -#~ "it's a\n" -#~ "very high security risk. Making the system unusable is very often a typo " -#~ "away.\n" -#~ "\n" -#~ "\n" -#~ "Therefore, you should connect to the system using the user account\n" -#~ "you will have created here, and login as root only for administration\n" -#~ "and maintenance purposes." -#~ msgstr "" -#~ "Silakan Anda buat satu atau lebih user \"biasa\", setelah Anda\n" -#~ "membuat user \"pihak berwenang\", yaitu root. Anda bisa buat\n" -#~ "user untuk tiap orang yang Anda perbolehkan untuk mengakses komputer\n" -#~ "ini. Perhatikan bahwa tiap account user akan memiliki preferesi\n" -#~ "sendiri-sendiri (environment grafis, seting program dsb)\n" -#~ "dan juga punya \"direktori home\" sendiri, tempat preferensi tadi\n" -#~ "disimpan\n" -#~ "\n" -#~ "\n" -#~ "Pertama-tama, buatlah account untuk Anda sendiri! Buatlah walau Anda\n" -#~ "adalah satu-satunya orang yang mengakses mesin ini. Anda nanti tidak\n" -#~ "BOLEH mengakses mesin ini untuk keperluan sehari-hari, karena merupakan\n" -#~ "resiko besar bila Anda sering login sebagai root. Biasanya ini " -#~ "disebabkan\n" -#~ "karena salah ketik, dsb.\n" -#~ "\n" -#~ "\n" -#~ "Karena itu, biasakan untuk konek ke msein ini dengan menggunakan account\n" -#~ "yang telah Anda buat disini, dan login sebagai root, hanya untuk \n" -#~ "keperluan administratif dan maintenance saja yah." - -#~ msgid "" -#~ "Creating a boot disk is strongly recommended. If you can't\n" -#~ "boot your computer, it's the only way to rescue your system without\n" -#~ "reinstalling it." -#~ msgstr "" -#~ "Sangat disarankan Anda membuat bootdisk. Bila Anda gagal\n" -#~ "memboot komputer, bootdisk adalah satu-satunya cara untuk\n" -#~ "menyelamatkan sistem tanpa instal ulang." - -#~ msgid "" -#~ "LILO and grub main options are:\n" -#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n" -#~ "partition) that contains the boot sector. Unless you know specifically\n" -#~ "otherwise, choose \"/dev/hda\".\n" -#~ "\n" -#~ "\n" -#~ " - Delay before booting default image: Specifies the number in tenths\n" -#~ "of a second the boot loader should wait before booting the first image.\n" -#~ "This is useful on systems that immediately boot from the hard disk after\n" -#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" -#~ "omitted or is set to zero.\n" -#~ "\n" -#~ "\n" -#~ " - Video mode: This specifies the VGA text mode that should be selected\n" -#~ "when booting. The following values are available: \n" -#~ "\n" -#~ " * normal: select normal 80x25 text mode.\n" -#~ "\n" -#~ " * <number>: use the corresponding text mode.\n" -#~ "\n" -#~ "\n" -#~ " - Clean \"/tmp\" at each boot: if you want delete all files and " -#~ "directories\n" -#~ "stored in \"/tmp\" when you boot your system, select this option.\n" -#~ "\n" -#~ "\n" -#~ " - Precise RAM if needed: unfortunately, there is no standard method to " -#~ "ask the\n" -#~ "BIOS about the amount of RAM present in your computer. As consequence, " -#~ "Linux may\n" -#~ "fail to detect your amount of RAM correctly. If this is the case, you " -#~ "can\n" -#~ "specify the correct amount or RAM here. Please note that a difference of " -#~ "2 or 4\n" -#~ "MB between detected memory and memory present in your system is normal." -#~ msgstr "" -#~ "Pilihan LILO dan grub adalah:\n" -#~ " - Boot device: Set nama devicenya (misalnya hard disk partisi) yang " -#~ "berisi boot sector\n" -#~ " pilih \"/dev/hda\", kecuali kalau Anda tahu yang " -#~ "pastinya.\n" -#~ "\n" -#~ "\n" -#~ " - Delay sebelum boot ke image default: Menentukan waktu dalam " -#~ "sepersepuluh detik\n" -#~ " sebelum boot loader akan meload image yang default (pertama). Ini " -#~ "berguna\n" -#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot " -#~ "loader\n" -#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol.\n" -#~ "\n" -#~ "\n" -#~ " - Video mode: Menentukan mode text VGA yang dipilih saat booting. \n" -#~ " Setting yang bisa dipakai: \n" -#~ " * normal: pilih mode text 80x25\n" -#~ " * <angka>: gunakan mode text.\n" -#~ "\n" -#~ "\n" -#~ " - Hapus \"/tmp\" saat boot bila Anda ingin menghapus semua file-file " -#~ "di dalam direktori\n" -#~ "\"/tmp\" saat boot sistem dimulai.\n" -#~ "\n" -#~ "\n" -#~ " - Ukuran RAM yang tepat. Duh, ngga ada metode standar untuk " -#~ "mendapatkan \n" -#~ "angka jumlah RAM yang tepat di komputer tertentu. Jadi, Linux mungkin " -#~ "akan\n" -#~ "salah mendeteksi jumlah RAM yang Anda punya sekarang. Bila benar, saya " -#~ "salah\n" -#~ "tebak angka RAMnya di sini, silakan masukkan angka yang benar. Oh ya,\n" -#~ "beda 2 atau 4 MB sih ngga masalah loh." - -#~ msgid "" -#~ "SILO is a bootloader for SPARC: it is able to boot\n" -#~ "either GNU/Linux or any other operating system present on your computer.\n" -#~ "Normally, these other operating systems are correctly detected and\n" -#~ "installed. If this is not the case, you can add an entry by hand in this\n" -#~ "screen. Be careful as to choose the correct parameters.\n" -#~ "\n" -#~ "\n" -#~ "You may also want not to give access to these other operating systems to\n" -#~ "anyone, in which case you can delete the corresponding entries. But\n" -#~ "in this case, you will need a boot disk in order to boot them!" -#~ msgstr "" -#~ "SILO adalah bootloader untuk SPARC: Dianya akan memboot\n" -#~ "GNU/Linux atau sistem operasi lain yang ada di komputer ini.\n" -#~ "Biasanya, sistem operasi yang sudah ada akan secara normal di deteksi " -#~ "dan\n" -#~ "diinstallkan. Bila ternyata nanti tak bisa, Anda bisa tambahkan sendiri\n" -#~ "secara manual di sini. Hati-hati yah nanti waktu kasih parameternya.\n" -#~ "\n" -#~ "\n" -#~ "Anda juga bisa menutup akses ke sistem operasi tertentu. Caranya gampang " -#~ "aja\n" -#~ "Anda bisa hapus entrinya di sini. Tapi untuk bisa masuk ke sistem operasi " -#~ "itu\n" -#~ "Anda perlu bootdisk nantinya." - -#~ msgid "" -#~ "SILO main options are:\n" -#~ " - Bootloader installation: Indicate where you want to place the\n" -#~ "information required to boot to GNU/Linux. Unless you know exactly\n" -#~ "what you are doing, choose \"First sector of drive (MBR)\".\n" -#~ "\n" -#~ "\n" -#~ " - Delay before booting default image: Specifies the number in tenths\n" -#~ "of a second the boot loader should wait before booting the first image.\n" -#~ "This is useful on systems that immediately boot from the hard disk after\n" -#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" -#~ "omitted or is set to zero." -#~ msgstr "" -#~ "Pilihan SILO dan grub adalah:\n" -#~ " - Instalasi Bootloader: Tempat Anda hendak meletakkan informasi boot\n" -#~ " ke GNU/Linux. Pilih aja \"Sektor pertama di drive (MBR)\", kecuali\n" -#~ " elu udah tau tempatnya\n" -#~ "\n" -#~ "\n" -#~ " - Delay sebelum boot ke image default: Menentukan waktu dalam " -#~ "sepersepuluh detik\n" -#~ " sebelum boot loader akan meload image yang default (pertama). Ini " -#~ "berguna\n" -#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot " -#~ "loader\n" -#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol." - -#~ msgid "" -#~ "Now it's time to configure the X Window System, which is the\n" -#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" -#~ "you must configure your video card and monitor. Most of these\n" -#~ "steps are automated, though, therefore your work may only consist\n" -#~ "of verifying what has been done and accept the settings :)\n" -#~ "\n" -#~ "\n" -#~ "When the configuration is over, X will be started (unless you\n" -#~ "ask DrakX not to) so that you can check and see if the\n" -#~ "settings suit you. If they don't, you can come back and\n" -#~ "change them, as many times as necessary." -#~ msgstr "" -#~ "Sekarang Anda akan mengkonfigurasikan X Window System, yang merupakan\n" -#~ "inti GUI (Graphical User Interface) bagi GNU/Linux. Sekarang,\n" -#~ "Anda harus konfigurasikan video card dan monitor. Biasanya\n" -#~ "tahapan ini akan otomatis, tapi Anda perlu verifikasi\n" -#~ "hasil deteksi dan memeriksanya, benar apa tidak:)\n" -#~ "\n" -#~ "\n" -#~ "Setelah itu, X akan dijalankan (kecuali kalau Anda bilang jangan)\n" -#~ "dan periksa apakah settingnya sudah cocok atau belum.\n" -#~ "Kalau tidak cocok, Anda bisa kembali lagi dan mengubah konfigurasi\n" -#~ "lalu coba lagi." - -#~ msgid "" -#~ "If something is wrong in X configuration, use these options to correctly\n" -#~ "configure the X Window System." -#~ msgstr "" -#~ "Bila ada yang ngaco pada konfigurasi Xnya, silaken pakai pilihan ini " -#~ "untuk\n" -#~ "membuat X Window System lebih bagus." - -#~ msgid "" -#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, " -#~ "select\n" -#~ "\"No\"." -#~ msgstr "" -#~ "Bila Anda ingin menggunakan login grafis, pilih \"Ya\". Sebaliknya,\n" -#~ "pilih \"Tidak\"." - -#~ msgid "" -#~ "You can choose a security level for your system. Please refer to the " -#~ "manual for complete\n" -#~ " information. Basically, if you don't know what to choose, keep the " -#~ "default option.\n" -#~ msgstr "" -#~ "Silakan pilih tingkat keamanan sistem ini. Baca dulu manualnya untuk info " -#~ "lebihlengkap\n" -#~ "Kalau Anda tak tahu, pilih saja default.\n" - -#~ msgid "" -#~ "Your system is going to reboot.\n" -#~ "\n" -#~ "After rebooting, your new Mandrake Linux system will load automatically.\n" -#~ "If you want to boot into another existing operating system, please read\n" -#~ "the additional instructions." -#~ msgstr "" -#~ "Sistem Anda akan diboot ulang.\n" -#~ "\n" -#~ "Setelah itu, Linux Mandrake akan di-load otomatis.\n" -#~ "Bila Anda ingin boot ke sistem operasi lain, silakan baca instruksi\n" -#~ "tambahan." - -#~ msgid "Czech (Programmers)" -#~ msgstr "Ceko (Pemrogram)" - -#~ msgid "Slovakian (Programmers)" -#~ msgstr "Slovakia (Pemrogram)" - -#~ msgid "Name of the profile to create:" -#~ msgstr "Beri nama profil yang hendak dibuat:" - -#~ msgid "Write /etc/fstab" -#~ msgstr "Tulis /etc/fstab" - -#~ msgid "Format all" -#~ msgstr "Format semua" - -#~ msgid "After formatting all partitions," -#~ msgstr "Setelah melakukan format semua partisi," - -#~ msgid "all data on these partitions will be lost" -#~ msgstr "seluruh data dalam partisi-partisi ini akan hilang" - -#~ msgid "Reload" -#~ msgstr "Muat ulang" - -#~ msgid "" -#~ "Do you want to generate an auto install floppy for linux replication?" -#~ msgstr "Mau buat disket auto install untuk replikasi linux?" - -#~ msgid "ADSL configuration" -#~ msgstr "konfigurasi ADSL" - -#~ msgid "" -#~ "With a remote CUPS server, you do not have to configure\n" -#~ "any printer here; printers will be automatically detected\n" -#~ "unless you have a server on a different network; in the\n" -#~ "latter case, you have to give the CUPS server IP address\n" -#~ "and optionally the port number." -#~ msgstr "" -#~ "Dengan server CUPS remote, Anda tidak perlu mengkonfigurasikan\n" -#~ "printer di sini; printer nantinya akan secara otomatis dideteksi\n" -#~ "kecuali servernya ada di jaringan lain; dalam hal ini, Anda perlu\n" -#~ "memasukan alamat IP server CUPS itu dan nomor portnya kalau ada." - -#~ msgid "Enter Printer Name and Comments" -#~ msgstr "Isi Nama Printer dan Komentar" - -#~ msgid "Remote queue name missing!" -#~ msgstr "Nama antrian remote hilang!" - -#~ msgid "" -#~ "Here you can specify any arbitrary command line into which the job should " -#~ "be piped instead of being sent directly to a printer." -#~ msgstr "" -#~ "Di sini Anda dapat menentukan perintah sebarang di mana job harus " -#~ "disodorkan, bukannya dikirim langsung ke printer." - -#~ msgid "Command line" -#~ msgstr "Perintah" - -#~ msgid "A command line must be entered!" -#~ msgstr "Harus diisi perintah" - -#~ msgid "Network Monitoring" -#~ msgstr "Pemantauan Jaringan" - -#~ msgid "Profile " -#~ msgstr "Profil " - -#~ msgid "Statistics" -#~ msgstr "Statistik" - -#~ msgid "Sending Speed:" -#~ msgstr "Kecepatan Kirim" - -#~ msgid "Receiving Speed:" -#~ msgstr "Kecepatan Terima: " - -#~ msgid "Connection Time: " -#~ msgstr "Waktu koneksi: " - -#~ msgid "Logs" -#~ msgstr "Log" - -#~ msgid "Connecting to Internet " -#~ msgstr "Sambung koneksi Internet " - -#~ msgid "Disconnecting from Internet " -#~ msgstr "Putuskan koneksi Internet " - -#~ msgid "Disconnection from Internet failed." -#~ msgstr "koneksi Internet gagal diputus." - -#~ msgid "Disconnection from Internet complete." -#~ msgstr "koneksi Internet selesai diputus." - -#~ msgid "Connection complete." -#~ msgstr "Koneksi selesai." - -#~ msgid "" -#~ "Connection failed.\n" -#~ "Verify your configuration in the Mandrake Control Center." -#~ msgstr "" -#~ "Koneksi gagal\n" -#~ "Silakan periksa konfigurasinya di Mandrake Control Center" - -#~ msgid "sent: " -#~ msgstr "terkirim: " - -#~ msgid "received: " -#~ msgstr "diterima: " - -#~ msgid "average" -#~ msgstr "rata-rata" - -#~ msgid "Default Runlevel" -#~ msgstr "Runlevel Standar" - -#~ msgid "NetWare" -#~ msgstr "NetWare" - -#~ msgid "Config file content could not be interpreted." -#~ msgstr "Isi file konfigurasi tidak dapat dibaca" - -#~ msgid "Unrecognized config file" -#~ msgstr "Config file tidak dikenal" - -#~ msgid "Adapter" -#~ msgstr "Adaptor" - -#~ msgid "Disable network" -#~ msgstr "Matikan jaringan" - -#~ msgid "Enable network" -#~ msgstr "Aktifkan jaringan" - -#~ msgid "" -#~ "You can now test your mouse. Use buttons and wheel to verify\n" -#~ "if settings are good. If not, you can click on \"Cancel\" to choose " -#~ "another\n" -#~ "driver." -#~ msgstr "" -#~ "Sekarang mouse Anda dapat dites. Gunakan tombol dan rodanya untuk\n" -#~ "mengecek setting-nya. Bila belum baik, pilih \"Batal\" untuk kembali\n" -#~ "memilih driver yang lain." - -#~ msgid "DSL (or ADSL) connection" -#~ msgstr "Konfigurasi koneksi DSL (atau ADSL)" - -#~ msgid "Choose" -#~ msgstr "Pilih" - -#~ msgid "You can specify directly the URI to access the printer with CUPS." -#~ msgstr "Anda bisa memasukan URI untuk mengakses printer dengan CUPS." - -#~ msgid "Yes, print ASCII test page" -#~ msgstr "Ya, tes cetak ascii" - -#~ msgid "Yes, print PostScript test page" -#~ msgstr "Ya, tes cetak postscript" - -#~ msgid "Paper Size" -#~ msgstr "Ukuran Kertas" - -#~ msgid "Eject page after job?" -#~ msgstr "Kertas di-eject setelah mencetak?" - -#~ msgid "Uniprint driver options" -#~ msgstr "Parameter driver Uniprint" - -#~ msgid "Color depth options" -#~ msgstr "Pilihan kedalaman warna" - -#~ msgid "Print text as PostScript?" -#~ msgstr "Cetak text dalam PostScript?" - -#~ msgid "Fix stair-stepping text?" -#~ msgstr "Betulkan efek tangga pada teks?" - -#~ msgid "Number of pages per output pages" -#~ msgstr "Jumlah halaman per output" - -#~ msgid "Right/Left margins in points (1/72 of inch)" -#~ msgstr "Margin Kiri/Kanan dalam point (1/72 inci)" - -#~ msgid "Top/Bottom margins in points (1/72 of inch)" -#~ msgstr "Margin Atas/Bawah dalam point (1/72 inci)" - -#~ msgid "Extra GhostScript options" -#~ msgstr "Extra option pada GhostScript" - -#~ msgid "Extra Text options" -#~ msgstr "Pilihan text extra" - -#~ msgid "Reverse page order" -#~ msgstr "Balikkan urutan halaman" - -#~ msgid "CUPS starting" -#~ msgstr "CUPS dijalankan" - -#~ msgid "Select Remote Printer Connection" -#~ msgstr "Pilih koneksi Printer remote" - -#~ msgid "" -#~ "Every printer need a name (for example lp).\n" -#~ "Other parameters such as the description of the printer or its location\n" -#~ "can be defined. What name should be used for this printer and\n" -#~ "how is the printer connected?" -#~ msgstr "" -#~ "Tiap antrian cetak harus punya nama (biasanya lp).\n" -#~ "Parameter lain seperti keterangan dan lokasi printer bisa ditambahkan.\n" -#~ "Sekarang saya mau tanya,\n" -#~ "nama printer yang digunakan ini apa yah ?\n" -#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?" - -#~ msgid "" -#~ "Every print queue (which print jobs are directed to) needs a\n" -#~ "name (often lp) and a spool directory associated with it. What\n" -#~ "name and directory should be used for this queue and how is the printer " -#~ "connected?" -#~ msgstr "" -#~ "Tiap antrian cetak harus punya nama (biasanya lp) dan direktori spool\n" -#~ "yang dialokasikan untuknya. Sekarang saya mau tanya,\n" -#~ "nama antrian dan direktori yang digunakan apa yah ?\n" -#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?" - -#~ msgid "Name of queue" -#~ msgstr "Nama Antrian" - -#~ msgid "Spool directory" -#~ msgstr "Direktori spool" - -#~ msgid "" -#~ "To enable a more secure system, you should select \"Use shadow file\" " -#~ "and\n" -#~ "\"Use MD5 passwords\"." -#~ msgstr "" -#~ "Agar sistem Anda lebih secure, silakan pilih \"Gunakan file shadow\" " -#~ "dan \n" -#~ "\"Pakai katasandi MD5\"." - -#~ msgid "" -#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask " -#~ "your\n" -#~ "network administrator." -#~ msgstr "" -#~ "Jika network Anda menggunakan NIS, pilih \"Gunakan NIS\". Jika tak tahu,\n" -#~ "tanya admin jaringan Anda." - -#~ msgid "yellow pages" -#~ msgstr "halaman kuning" - -#~ msgid "Light configuration" -#~ msgstr "Konfigurasi ringan" - -#~ msgid "Provider dns 1" -#~ msgstr "DNS Provider 1" - -#~ msgid "Provider dns 2" -#~ msgstr "DNS Provider 2" - -#~ msgid "How do you want to connect to the Internet?" -#~ msgstr "Pilih cara yang Anda inginkan untuk terhubung ke Internet" - -#~ msgid "cannot fork: " -#~ msgstr "tidak bisa fork: " - -#~ msgid "Selected size %d%s" -#~ msgstr "Ukuran yang dipilih %d%s" - -#~ msgid "Opening your connection..." -#~ msgstr "Buka koneksi..." - -#~ msgid "This startup script try to load your modules for your usb mouse." -#~ msgstr "Skrip ini akan meload modul untuk mouse usb" |