summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/hu.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/hu.po')
-rw-r--r--perl-install/share/po/hu.po4004
1 files changed, 4004 insertions, 0 deletions
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
new file mode 100644
index 000000000..51dad9b88
--- /dev/null
+++ b/perl-install/share/po/hu.po
@@ -0,0 +1,4004 @@
+# Translation file of Mandrake graphic install
+# Copyright (C) 1999 Mandrakesoft
+# KOVACS Emese Alexandra <emese@goliat.eik.bme.hu>
+# Kultsar Kadosa Atilla <kadi@kadi.emg.hu>
+# Takacs Sandor <taki@dfmk.hu>
+# 1999.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: DrakX VERSION\n"
+"POT-Creation-Date: 2000-01-09 21:03+0100\n"
+"PO-Revision-Date: 1999-09-21 02:00+0200\n"
+"Last-Translator: KOVACS Emese Alexandra <emese@goliat.eik.bme.hu>\n"
+"Language-Team: hungarian\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Graphic card"
+msgstr "Vide�k�rtya"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Select a graphic card"
+msgstr "V�lassz vide�k�rty�t"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "Choose a X server"
+msgstr "V�lassz X szervert"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "X server"
+msgstr "X szerver"
+
+#: ../Xconfigurator.pm_.c:181
+msgid "Select the memory size of your graphic card"
+msgstr "V�laszd ki a grafikus k�rtya mem�riam�ret�t"
+
+#: ../Xconfigurator.pm_.c:203
+msgid "Choose options for server"
+msgstr "V�lassz a k�vetkez� lehet�s�gek k�z�l"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Choose a monitor"
+msgstr "V�lassz monitort"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Monitor"
+msgstr "Monitor"
+
+#: ../Xconfigurator.pm_.c:224
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"A k�t kritikus param�ter a f�gg�leges friss�t�s, ez az a frekvencia, amivel "
+"a \n"
+"teljes k�perny� friss�l �s a m�g fontosabb v�zszintes friss�t�s, ez az a \n"
+"frekvencia, amivel a monitor a v�zszintes vonalakat rajzolja, amikb�l a\n"
+"k�pet v�g�l �ssze�ll�tja.\n"
+"\n"
+"NAGYON FONTOS, hogy ne adj meg olyan friss�t�st, ami meghaladja a monitorod "
+"k�pess�geit.\n"
+"Ha k�ts�geid vannak, v�laszd ink�bb az alacsonyabb �rt�ket."
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Horizontal refresh rate"
+msgstr "V�zszintes friss�t�s"
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Vertical refresh rate"
+msgstr "F�gg�leges friss�t�s"
+
+#: ../Xconfigurator.pm_.c:272
+msgid "Monitor not configured"
+msgstr "A monitor nincs be�ll�tva"
+
+#: ../Xconfigurator.pm_.c:275
+msgid "Graphic card not configured yet"
+msgstr "A grafikus k�rtya nincs be�ll�tva"
+
+#: ../Xconfigurator.pm_.c:278
+msgid "Resolutions not chosen yet"
+msgstr "Nem v�lasztott�l m�g felbont�st"
+
+#: ../Xconfigurator.pm_.c:289
+msgid "Do you want to test the configuration?"
+msgstr "Leteszteled a be�ll�t�sokat?"
+
+#: ../Xconfigurator.pm_.c:293
+msgid "Warning: testing is dangerous on this graphic card"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:296
+msgid "Test configuration"
+msgstr "Be�ll�t�sok tesztel�se"
+
+#: ../Xconfigurator.pm_.c:334
+msgid "An error occurred:"
+msgstr "Hiba t�rt�nt:"
+
+#: ../Xconfigurator.pm_.c:336
+msgid ""
+"\n"
+"try changing some parameters"
+msgstr ""
+"\n"
+"v�ltoztass meg p�r param�tert"
+
+#: ../Xconfigurator.pm_.c:358
+#, c-format
+msgid "(leaving in %d seconds)"
+msgstr "(kil�p�s %d m�sodpercen bel�l)"
+
+#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
+msgid "Is this correct?"
+msgstr "Rendben?"
+
+#: ../Xconfigurator.pm_.c:370
+msgid "An error occurred, try changing some parameters"
+msgstr "Hiba l�pett fel, v�ltoztass meg p�r param�tert"
+
+#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
+msgid "Automatic resolutions"
+msgstr "Automatikus felbont�sok"
+
+#: ../Xconfigurator.pm_.c:379
+msgid ""
+"To find the available resolutions I will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+"Megkeresem a m�k�d�k�pes felbont�sokat. Ezalatt a monitor villogni fog...\n"
+"Ha ez zavar, nyugodtan kikapcsolhatod, csipog�ssal jelzem, amikor befejeztem."
+
+#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
+msgid "Resolution"
+msgstr "Felbont�s"
+
+#: ../Xconfigurator.pm_.c:469
+msgid "Choose resolution and color depth"
+msgstr "V�lassz felbont�st �s sz�nm�lys�get"
+
+#: ../Xconfigurator.pm_.c:477
+msgid "Show all"
+msgstr "Mindent mutat"
+
+#: ../Xconfigurator.pm_.c:501
+msgid "Resolutions"
+msgstr "Felbont�sok"
+
+#: ../Xconfigurator.pm_.c:548
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Sometimes, though, it may hang the machine.\n"
+"Do you want to try?"
+msgstr ""
+"Kipr�b�lhatom az el�rhet� felbont�sokat (pl. 800x600).\n"
+"Ez rossz esetben lefagyaszthatja a sz�m�t�g�pet.\n"
+"Megpr�b�ljam?"
+
+#: ../Xconfigurator.pm_.c:553
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+"Nem tal�ltam �rv�nyes vide�m�dot.\n"
+"Pr�b�ld meg egy m�sik vide�k�rty�val vagy monitorral"
+
+#: ../Xconfigurator.pm_.c:772
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "Billenty�zetkioszt�s: %s\n"
+
+#: ../Xconfigurator.pm_.c:773
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr "Eg�r t�pusa: %s\n"
+
+#: ../Xconfigurator.pm_.c:774
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Eg�r device: %s\n"
+
+#: ../Xconfigurator.pm_.c:775
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../Xconfigurator.pm_.c:776
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor v�zszintes szinkroniz�ci�ja: %s\n"
+
+#: ../Xconfigurator.pm_.c:777
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor f�gg�leges friss�t�se: %s\n"
+
+#: ../Xconfigurator.pm_.c:778
+#, c-format
+msgid "Graphic card: %s\n"
+msgstr "Vide�k�rtya: %s\n"
+
+#: ../Xconfigurator.pm_.c:779
+#, c-format
+msgid "Graphic memory: %s kB\n"
+msgstr "Grafikus mem�ria: %s kB\n"
+
+#: ../Xconfigurator.pm_.c:780
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 szerver: %s\n"
+
+#: ../Xconfigurator.pm_.c:794
+msgid "Preparing X-Window configuration"
+msgstr "X-Window be�ll�t�s�nak el�k�sz�t�se"
+
+#: ../Xconfigurator.pm_.c:808
+msgid "Change Monitor"
+msgstr "Monitor v�ltoztat�sa"
+
+#: ../Xconfigurator.pm_.c:809
+msgid "Change Graphic card"
+msgstr "Grafikus k�rtya v�ltoztat�sa"
+
+#: ../Xconfigurator.pm_.c:810
+msgid "Change Server options"
+msgstr "Szerver opci�k megv�ltoztat�sa"
+
+#: ../Xconfigurator.pm_.c:811
+msgid "Change Resolution"
+msgstr "Felbont�s v�ltoztat�sa"
+
+#: ../Xconfigurator.pm_.c:812
+msgid "Automatical resolutions search"
+msgstr "Automatikus felbont�s keres�s"
+
+#: ../Xconfigurator.pm_.c:816
+msgid "Show information"
+msgstr "Adatok megjelen�t�se"
+
+#: ../Xconfigurator.pm_.c:817
+msgid "Test again"
+msgstr "�jra tesztel"
+
+#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
+msgid "Quit"
+msgstr "Kil�p�s"
+
+#: ../Xconfigurator.pm_.c:822
+msgid "What do you want to do?"
+msgstr "Mit akarsz tenni?"
+
+#: ../Xconfigurator.pm_.c:829
+msgid "Forget the changes?"
+msgstr "V�ltoztat�sok elvet�se?"
+
+#: ../Xconfigurator.pm_.c:845
+#, c-format
+msgid "Please relog into %s to activate the changes"
+msgstr ""
+"K�rlek jelentkezz be �jra a %s -be/-ba, hogy a v�ltoz�sok �rv�nyre jussanak"
+
+#: ../Xconfigurator.pm_.c:861
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"K�rlek l�pj�l ki majd haszn�ld a Ctrl-Alt-BackSpace billenty�kombin�ci�t"
+
+#: ../Xconfigurator.pm_.c:864
+msgid "X at startup"
+msgstr "Automatikus X ind�t�s"
+
+#: ../Xconfigurator.pm_.c:865
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+"Be tudom �ll�tani, hogy a k�vetkez� bootol�skor az X automatikusan "
+"elinduljon.\n"
+"Be�ll�tsam?"
+
+#: ../Xconfigurator_consts.pm_.c:4
+msgid "256 colors (8 bits)"
+msgstr "256 sz�n (8 bit)"
+
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors (15 bits)"
+msgstr "32 ezer sz�n (15 bit)"
+
+#: ../Xconfigurator_consts.pm_.c:6
+msgid "65 thousand colors (16 bits)"
+msgstr "65 ezer sz�n (16 bit)"
+
+#: ../Xconfigurator_consts.pm_.c:7
+msgid "16 million colors (24 bits)"
+msgstr "16 milli� sz�n (24 bit)"
+
+#: ../Xconfigurator_consts.pm_.c:8
+msgid "4 billion colors (32 bits)"
+msgstr "4 milli�rd sz�n (32 bit)"
+
+#: ../Xconfigurator_consts.pm_.c:96
+msgid "256 kB"
+msgstr "256 kB"
+
+#: ../Xconfigurator_consts.pm_.c:97
+msgid "512 kB"
+msgstr "512 kB"
+
+#: ../Xconfigurator_consts.pm_.c:98
+msgid "1 MB"
+msgstr "1 MB"
+
+#: ../Xconfigurator_consts.pm_.c:99
+msgid "2 MB"
+msgstr "2 MB"
+
+#: ../Xconfigurator_consts.pm_.c:100
+msgid "4 MB"
+msgstr "4 MB"
+
+#: ../Xconfigurator_consts.pm_.c:101
+msgid "8 MB"
+msgstr "8 MB"
+
+#: ../Xconfigurator_consts.pm_.c:102
+msgid "16 MB or more"
+msgstr "16 MB vagy t�bb"
+
+#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
+msgid "Standard VGA, 640x480 at 60 Hz"
+msgstr "Standard VGA, 640x480 60 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:109
+msgid "Super VGA, 800x600 at 56 Hz"
+msgstr "Super VGA, 800x600 56 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:110
+msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
+msgstr "8514 kompatibilis, 1024x768 87 Hz v�ltottsoros (nem 800x600)"
+
+#: ../Xconfigurator_consts.pm_.c:111
+msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+msgstr "Super VGA, 1024x768 87 Hz v�ltottsoros, 800x600 56 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:112
+msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+msgstr "Extended Super VGA, 800x600 60 Hz-en, 640x480 72 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:113
+msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+msgstr "Nem-v�ltottsoros SVGA, 1024x768 60 Hz-en, 800x600 72 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:114
+msgid "High Frequency SVGA, 1024x768 at 70 Hz"
+msgstr "Magas frekvenci�j� SVGA, 1024x768 70 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:115
+msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
+msgstr "T�bb-frekvenci�j� monitor, amely tud 1280x1024 60 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:116
+msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
+msgstr "T�bb-frekvenci�j� monitor, amely tud 1280x1024 74 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:117
+msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
+msgstr "T�bb-frekvenci�j� monitor, amely tud 1280x1024 76 Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:118
+msgid "Monitor that can do 1600x1200 at 70 Hz"
+msgstr "Olyan monitor, ami tud 1280x1024-et 76Hz-en"
+
+#: ../Xconfigurator_consts.pm_.c:119
+msgid "Monitor that can do 1600x1200 at 76 Hz"
+msgstr "Olyan monitor, ami tud 1600x1200-at 76Hz-en"
+
+#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
+msgid "Create"
+msgstr "L�trehoz"
+
+#: ../diskdrake.pm_.c:17
+msgid "Unmount"
+msgstr "Unmount"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
+msgid "Delete"
+msgstr "T�rl�s"
+
+#: ../diskdrake.pm_.c:18
+msgid "Format"
+msgstr "Form�z�s"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
+msgid "Resize"
+msgstr "�tm�retez"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
+msgid "Type"
+msgstr "T�pus"
+
+#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
+msgid "Mount point"
+msgstr "Mount pont"
+
+#: ../diskdrake.pm_.c:33
+msgid "Write /etc/fstab"
+msgstr "/etc/fstab �r�sa"
+
+#: ../diskdrake.pm_.c:34
+msgid "Toggle to expert mode"
+msgstr "V�lt�s halad� m�dba"
+
+#: ../diskdrake.pm_.c:35
+msgid "Toggle to normal mode"
+msgstr "V�lt�s norm�l m�dba"
+
+#: ../diskdrake.pm_.c:36
+msgid "Restore from file"
+msgstr "Vissza�ll�t�s f�jlb�l"
+
+#: ../diskdrake.pm_.c:37
+msgid "Save in file"
+msgstr "Ment�s f�jlba"
+
+#: ../diskdrake.pm_.c:38
+msgid "Restore from floppy"
+msgstr "Vissza�ll�t�s lemezr�l"
+
+#: ../diskdrake.pm_.c:39
+msgid "Save on floppy"
+msgstr "Ment�s lemezre"
+
+#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
+#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
+msgid "Done"
+msgstr "K�sz"
+
+#: ../diskdrake.pm_.c:43
+msgid "Clear all"
+msgstr "Mindet t�rli"
+
+#: ../diskdrake.pm_.c:44
+msgid "Format all"
+msgstr "�sszes part�ci� form�z�sa"
+
+#: ../diskdrake.pm_.c:45
+msgid "Auto allocate"
+msgstr "Automatikus helyfoglal�s"
+
+#: ../diskdrake.pm_.c:48
+msgid "All primary partitions are used"
+msgstr "Minden els�dleges part�ci� haszn�lva van"
+
+#: ../diskdrake.pm_.c:48
+msgid "I can't add any more partition"
+msgstr "Nem hozhat� l�tre t�bb part�ci�"
+
+#: ../diskdrake.pm_.c:48
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Tov�bbi part�ci�k l�trehoz�s�hoz t�r�lj egyet, hogy kiterjesztett part�ci�t\n"
+"hozhass l�tre"
+
+#: ../diskdrake.pm_.c:51
+#, fuzzy
+msgid "Rescue partition table"
+msgstr "Part�ci�s t�bla �r�sa"
+
+#: ../diskdrake.pm_.c:52
+msgid "Undo"
+msgstr "Visszavon�s"
+
+#: ../diskdrake.pm_.c:53
+msgid "Write partition table"
+msgstr "Part�ci�s t�bla �r�sa"
+
+#: ../diskdrake.pm_.c:54
+msgid "Reload"
+msgstr "�jrat�lt�s"
+
+#: ../diskdrake.pm_.c:98
+msgid "Empty"
+msgstr "�res"
+
+#: ../diskdrake.pm_.c:98
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../diskdrake.pm_.c:98
+msgid "FAT"
+msgstr "FAT"
+
+#: ../diskdrake.pm_.c:98
+msgid "Other"
+msgstr "Egy�b"
+
+#: ../diskdrake.pm_.c:98
+msgid "Swap"
+msgstr "Swap"
+
+#: ../diskdrake.pm_.c:104
+msgid "Filesystem types:"
+msgstr "F�jlrendszer t�pusok:"
+
+#: ../diskdrake.pm_.c:113
+msgid "Details"
+msgstr "R�szletek"
+
+#: ../diskdrake.pm_.c:127
+msgid ""
+"You have one big fat partition\n"
+"(generally use by MicroSoft Dos/Windows).\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Egy nagy FAT part�ci�d van\n"
+"(ez �ltal�ban a DOS-os/Windows-os part�ci�).\n"
+"Azt aj�nlom, hogy m�retezd �t ezt a part�ci�t\n"
+"(kattints r�, majd kattints az \"�tm�retez\" gombra)"
+
+#: ../diskdrake.pm_.c:132
+msgid "Please make a backup of your data first"
+msgstr "K�rlek el�sz�r mentsd le az adatokat"
+
+#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
+#: ../diskdrake.pm_.c:487
+msgid "Read carefully!"
+msgstr "Figyelmesen olvasd!"
+
+#: ../diskdrake.pm_.c:146
+#, c-format
+msgid "After %s partition %s,"
+msgstr "%s ut�n %s part�ci�,"
+
+#: ../diskdrake.pm_.c:146
+msgid "all data on this partition will be lost"
+msgstr "a part�ci�n minden adat elv�sz"
+
+#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
+#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
+#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
+msgid "Error"
+msgstr "Hiba"
+
+#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
+msgid "Mount point: "
+msgstr "Mount pont: "
+
+#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
+msgid "Device: "
+msgstr "Eszk�z: "
+
+#: ../diskdrake.pm_.c:191
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS meghajt� bet�jele: %s (csak egy tipp)\n"
+
+#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
+msgid "Type: "
+msgstr "T�pus: "
+
+#: ../diskdrake.pm_.c:193
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "Kezd�szektor: %s\n"
+
+#: ../diskdrake.pm_.c:194
+#, c-format
+msgid "Size: %s MB"
+msgstr "M�ret: %s MB"
+
+#: ../diskdrake.pm_.c:196
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s szektor"
+
+#: ../diskdrake.pm_.c:198
+#, c-format
+msgid "Cylinder %d to cylinder %d\n"
+msgstr "%d cylindert�l %d cylinderig\n"
+
+#: ../diskdrake.pm_.c:199
+msgid "Formatted\n"
+msgstr "Megform�zva\n"
+
+#: ../diskdrake.pm_.c:200
+msgid "Not formatted\n"
+msgstr "Nincs megform�zva\n"
+
+#: ../diskdrake.pm_.c:201
+msgid "Mounted\n"
+msgstr "Felmountolva\n"
+
+#: ../diskdrake.pm_.c:202
+#, c-format
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
+
+#: ../diskdrake.pm_.c:203
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Alap�rtelmezett ind�t�si part�ci�\n"
+" (DOS-nak, nem lilonak)\n"
+
+#: ../diskdrake.pm_.c:205
+#, c-format
+msgid "Level %s\n"
+msgstr "Level %s\n"
+
+#: ../diskdrake.pm_.c:206
+#, c-format
+msgid "Chunk size %s\n"
+msgstr "Szelet m�rete %s\n"
+
+#: ../diskdrake.pm_.c:207
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID-diszkek %s\n"
+
+#: ../diskdrake.pm_.c:224
+msgid "Please click on a partition"
+msgstr "Kattints egy part�ci�ra"
+
+#: ../diskdrake.pm_.c:229
+#, c-format
+msgid "Size: %d MB\n"
+msgstr "M�ret: %d MB\n"
+
+#: ../diskdrake.pm_.c:230
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometria: %s cylinder, %s fej, %s szektor\n"
+
+#: ../diskdrake.pm_.c:232
+#, c-format
+msgid "on bus %d id %d\n"
+msgstr "%d buszon, %d id-vel\n"
+
+#: ../diskdrake.pm_.c:245
+msgid "Mount"
+msgstr "Mount"
+
+#: ../diskdrake.pm_.c:246
+msgid "Active"
+msgstr "Akt�v"
+
+#: ../diskdrake.pm_.c:247
+msgid "Add to RAID"
+msgstr "RAID-hez hozz�ad"
+
+#: ../diskdrake.pm_.c:248
+msgid "Remove from RAID"
+msgstr "RAID-b�l elt�vol�t"
+
+#: ../diskdrake.pm_.c:249
+msgid "Modify RAID"
+msgstr "RAID m�dos�t�sa"
+
+#: ../diskdrake.pm_.c:256
+msgid "Choose action"
+msgstr "V�lassz"
+
+#: ../diskdrake.pm_.c:349
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use LILO and it won't work, or you don't use LILO and you don't "
+"need /boot"
+msgstr ""
+"Sajn�lom, de nem hozhatom l�tre a /boot-ot ennyire messze a merevlemez "
+"elej�t�l (cylinder > 1024).\n"
+"Vagy haszn�ld a LILO-t, de nem fog m�k�dni vagy ne haszn�ld a LILO-t �s "
+"akkor nem kell a /boot"
+
+#: ../diskdrake.pm_.c:353
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the LILO boot manager, be careful to add a /boot partition"
+msgstr ""
+"Az a part�ci�, amit root part�ci�nak sz�nsz (/) fizikailag az 1024. cylinder "
+"ut�n tal�lhat� a merevlemezen �s nincs /boot part�ci�d.\n"
+"Ha a LILO boot manager-t akarod haszn�lni, csin�lj egy /boot part�ci�t"
+
+#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Haszn�ld ink�bb a ``%s''-t"
+
+#: ../diskdrake.pm_.c:375
+msgid "Use ``Unmount'' first"
+msgstr "Haszn�ld el�sz�r az ``Unmount''-ot"
+
+#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
+msgid "changing type of"
+msgstr "t�pus v�ltoztat�sa"
+
+#: ../diskdrake.pm_.c:388
+msgid "Continue anyway?"
+msgstr "Ett�l f�ggetlen�l folytassam?"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without saving"
+msgstr "Kil�p�s ment�s n�lk�l"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without writing the partition table?"
+msgstr "Kil�psz a programb�l a part�ci�s t�bla elment�se n�lk�l?"
+
+#: ../diskdrake.pm_.c:412
+msgid "Change partition type"
+msgstr "Part�ci� t�pus�nak v�ltoztat�sa"
+
+#: ../diskdrake.pm_.c:413
+msgid "Which partition type do you want?"
+msgstr "Milyen part�ci� t�pust akarsz?"
+
+#: ../diskdrake.pm_.c:429
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Hov� akarod felmountolni a %s eszk�zt?"
+
+#: ../diskdrake.pm_.c:451
+msgid "formatting"
+msgstr "form�z�s"
+
+#: ../diskdrake.pm_.c:453
+msgid "Formatting"
+msgstr "Form�z�s"
+
+#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
+#, c-format
+msgid "Formatting partition %s"
+msgstr "A %s part�ci� form�z�sa"
+
+#: ../diskdrake.pm_.c:458
+msgid "After formatting all partitions,"
+msgstr "Az �sszes part�ci� form�z�sa ut�n "
+
+#: ../diskdrake.pm_.c:458
+msgid "all data on these partitions will be lost"
+msgstr "minden adat elv�sz a part�ci�kr�l"
+
+#: ../diskdrake.pm_.c:468
+msgid "Move"
+msgstr "�thelyez�s"
+
+#: ../diskdrake.pm_.c:469
+msgid "Which disk do you want to move to?"
+msgstr "Melyik diszket akarod mozgatni?"
+
+#: ../diskdrake.pm_.c:473
+msgid "Sector"
+msgstr "Szektor"
+
+#: ../diskdrake.pm_.c:474
+msgid "Which sector do you want to move to?"
+msgstr "Melyik szektort akarod mozgatni?"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving"
+msgstr "Mozgat�s"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving partition..."
+msgstr "Part�ci� mozgat�sa..."
+
+#: ../diskdrake.pm_.c:487
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "A %s meghajt� part�ci�s t�bl�j�t fogom menteni!"
+
+#: ../diskdrake.pm_.c:489
+msgid "You'll need to reboot before the modification can take place"
+msgstr "�jra kell ind�tanod a g�pet, hogy a v�ltoz�sok �rv�nyes�ljenek"
+
+#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
+msgid "Computing fat filesystem bounds"
+msgstr "F�jlrendszer-jellemz�k kisz�m�t�sa"
+
+#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
+#: ../install_steps_gtk.pm_.c:255
+msgid "Resizing"
+msgstr "�tm�retez�s"
+
+#: ../diskdrake.pm_.c:524
+msgid "resizing"
+msgstr "�tm�retez�s"
+
+#: ../diskdrake.pm_.c:534
+msgid "Choose the new size"
+msgstr "Add meg az �j m�retet"
+
+#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:317
+#: ../install_steps_gtk.pm_.c:361
+msgid "MB"
+msgstr "MB"
+
+#: ../diskdrake.pm_.c:587
+msgid "Create a new partition"
+msgstr "�j part�ci� l�trehoz�sa"
+
+#: ../diskdrake.pm_.c:603
+msgid "Start sector: "
+msgstr "Kezd�szektor: "
+
+#: ../diskdrake.pm_.c:606
+msgid "Size in MB: "
+msgstr "M�ret MB-ban: "
+
+#: ../diskdrake.pm_.c:609
+msgid "Filesystem type: "
+msgstr "F�jlrendszer t�pusa: "
+
+#: ../diskdrake.pm_.c:611
+msgid "Preference: "
+msgstr "Be�ll�t�sok: "
+
+#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
+msgid "Select file"
+msgstr "F�jl kiv�laszt�sa"
+
+#: ../diskdrake.pm_.c:664
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"A part�ci�s t�bla biztons�gi m�solat�nak a m�rete nem egyezik meg\n"
+"Biztos, hogy folytassam?"
+
+#: ../diskdrake.pm_.c:672
+msgid "Warning"
+msgstr "Figyelmeztet�s"
+
+#: ../diskdrake.pm_.c:673
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Helyezz be egy lemezt a meghajt�ba\n"
+"A lemezen minden adat elv�sz"
+
+#: ../diskdrake.pm_.c:687
+msgid "Trying to rescue partition table"
+msgstr "Megpr�b�lom vissza�ll�tani a part�ci�s t�bl�t"
+
+#: ../diskdrake.pm_.c:698
+msgid "device"
+msgstr "eszk�z"
+
+#: ../diskdrake.pm_.c:699
+msgid "level"
+msgstr "szint"
+
+#: ../diskdrake.pm_.c:700
+msgid "chunk size"
+msgstr "szelet m�rete"
+
+#: ../diskdrake.pm_.c:712
+msgid "Choose an existing RAID to add to"
+msgstr "V�lassz ki egy m�r l�tez� RAID-et, ehhez adom a diszket"
+
+#: ../diskdrake.pm_.c:713
+msgid "new"
+msgstr "�j"
+
+#: ../fs.pm_.c:67 ../fs.pm_.c:73
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "%s f�jlrendszer l�trehoz�sa a %s eszk�z�n sikertelen"
+
+#: ../fs.pm_.c:93
+#, c-format
+msgid "don't know how to format %s in type %s"
+msgstr "nem tudom, hogyan form�zzam meg %s -t %s t�pus�ra"
+
+#: ../fs.pm_.c:106
+msgid "nfs mount failed"
+msgstr "nfs mountol�s sikertelen"
+
+#: ../fs.pm_.c:123
+msgid "mount failed: "
+msgstr "mountol�s sikertelen: "
+
+#: ../fs.pm_.c:134
+#, c-format
+msgid "error unmounting %s: %s"
+msgstr "hiba %s lemountol�sakor: %s"
+
+#: ../fsedit.pm_.c:219
+msgid "Mount points must begin with a leading /"
+msgstr "A mount pontnak /-el kell kezd�dnie"
+
+#: ../fsedit.pm_.c:222
+#, c-format
+msgid "There is already a partition with mount point %s"
+msgstr "M�r van egy part�ci� %s mount ponttal"
+
+#: ../fsedit.pm_.c:306
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "Hiba %s �r�sra val� megnyit�sakor: %s"
+
+#: ../fsedit.pm_.c:388
+msgid ""
+"An error has occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Hiba t�rt�nt - nincs �rv�nyes meghajt�, amelyen f�jlrendszereket lehetne "
+"l�trehozni. Ellen�rizd a hardvert �s pr�b�ld megtal�lni a hib�t"
+
+#: ../fsedit.pm_.c:403
+msgid "You don't have any partitions!"
+msgstr "Nincs egyetlen part�ci�d sem!"
+
+#: ../help.pm_.c:7
+msgid "Choose preferred language for install and system usage."
+msgstr ""
+"V�laszd ki a nyelvet, amin a telep�t�st szeretn�d lefolytatni, majd k�s�bb a "
+"rendszert haszn�lni."
+
+#: ../help.pm_.c:10
+msgid "Choose the layout corresponding to your keyboard from the list above"
+msgstr "V�laszd ki a billenty�zeted kioszt�s�t a fenti list�b�l"
+
+#: ../help.pm_.c:13
+msgid ""
+"Choose \"Install\" if there are no previous versions of Linux\n"
+"installed, or if you wish to use multiple distributions or versions.\n"
+"\n"
+"\n"
+"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
+"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
+"(Helios) or Gold 2000."
+msgstr ""
+"V�laszd a \"Telep�t�st\", ha nincs kor�bbi Linux verzi� install�lva,\n"
+"vagy ha t�bb k�l�nb�z� disztrib�ci�t vagy verzi�t haszn�lsz.\n"
+"\n"
+"\n"
+"V�laszd a \"Friss�t�st\", ha a friss�teni akarod a Mandrake Linux\n"
+"valamelyik kor�bbi v�ltozat�t: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen),\n"
+"6.0 (Venus), 6.1 (Helios) vagy Gold 2000."
+
+#: ../help.pm_.c:22
+msgid ""
+"Select:\n"
+"\n"
+" - Recommended: If you have never installed Linux before.\n"
+"\n"
+"\n"
+" - Customized: If you are familiar with Linux, you will be able to \n"
+"select the usage for the installed system between normal, development or\n"
+"server. Choose \"Normal\" for a general purpose installation of your\n"
+"computer. You may choose \"Development\" if you will be using the computer\n"
+"primarily for software development, or choose \"Server\" if you wish to\n"
+"install a general purpose server (for mail, printing...).\n"
+"\n"
+"\n"
+" - Expert: If you are fluent with GNU/Linux and want to perform\n"
+"a highly customized installation, this Install Class is for you. You will\n"
+"be able to select the usage of your installed system as for \"Customized\"."
+msgstr ""
+"V�lassz:\n"
+"\n"
+" - Javasolt: Ha m�g sohasem telep�tett�l Linuxot.\n"
+"\n"
+"\n"
+" - Egyedi: Ha m�r j�l ismered a Linuxot �s ki tudod v�lasztani, \n"
+"hogy norm�l, fejleszt�i vagy kiszolg�l� konfigur�ci�t akarsz-e telep�teni.\n"
+"V�laszd a \"Norm�l\"-t, ha �ltal�nos c�lokra szeretn�d haszn�lni a \n"
+"sz�m�t�g�pet. V�laszthatod a \"Fejleszt�i\" opci�t, ha els�sorban \n"
+"alkalmaz�sfejleszt�sre haszn�lod a g�ped, vagy a \"Kiszolg�l�\" opci�t, ha \n"
+"�ltal�nos c�l� kiszolg�l�t akarsz telep�teni (levelez�shez, nyomtat�shoz...)."
+
+#: ../help.pm_.c:40
+msgid ""
+"DrakX will attempt at first to look for one or more PCI\n"
+"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
+"to use, it will insert it (them) automatically.\n"
+"\n"
+"\n"
+"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
+"doesn't know which driver to use for this card, or if you have no\n"
+"SCSI adapters at all, you will then be prompted on whether you have\n"
+"one or not. If you have none, answer \"No\". If you have one or more,\n"
+"answer \"Yes\". A list of drivers will then pop up, from which you\n"
+"will have to select one.\n"
+"\n"
+"\n"
+"After you have selected the driver, DrakX will ask if you\n"
+"want to specify options for it. First, try and let the driver\n"
+"probe for the hardware: it usually works fine.\n"
+"\n"
+"\n"
+"If not, do not forget the information on your hardware that you\n"
+"could get from your documentation or from Windows (if you have it\n"
+"on your system), as suggested by the installation guide. These\n"
+"are the options you will need to provide to the driver."
+msgstr ""
+"A DrakX el�sz�r ellen�rzi, hogy tal�l-e egy vagy t�bb PCI-os SCSI vez�rl�t.\n"
+"Ha tal�l ilyet (ilyeneket) �s megtal�lja a hozz� (hozz�juk) tartoz�\n"
+"driver-t (driver-eket), automatikusan beilleszti azt (azokat).\n"
+"\n"
+"\n"
+"Ha a SCSI vez�rl� k�rty�d ISA-s vagy PCI-os, de a DrakX nem tudja\n"
+"eld�nteni, hogy melyik driver-t haszn�lja hozz�, vagy ha nincs is\n"
+"SCSI k�rty�d, a DrakX megk�rdi, hogy van-e k�rty�d. Ha nincsen, v�laszolj\n"
+"\"Nem\"-mel. Ha van egy vagy t�bb SCSI k�rty�d, v�laszolj \"Igen\"-nel.\n"
+"Ez esetben megjelenik egy lista a driver-ekkel, ebb�l v�laszthatod ki\n"
+"a megfelel�t.\n"
+"\n"
+"\n"
+"A driver kiv�laszt�sa ut�n a DrakX megk�rdezi, hogy milyen opci�kat akarsz\n"
+"megadni. Els� k�rben c�lszer� a driverre hagyni a hardver meghat�roz�s�t,\n"
+"�ltal�ban m�k�dni szokott.\n"
+"\n"
+"\n"
+"Ha m�gsem m�k�dik, akkor haszn�ld a hardverrel j�r� dokument�ci�t, \n"
+"vagy n�zd meg, hogy a Windows minek ismeri fel a k�rty�t (persze, ha van \n"
+"Windows a g�peden), ahogyan ezt a Telep�t�si �tmutat� �rja. Ezeket az \n"
+"opci�kat kell megadnod a driver-nek."
+
+#: ../help.pm_.c:64
+msgid ""
+"At this point, you may choose what partition(s) to use to install\n"
+"your Linux-Mandrake system if they have been already defined (from a\n"
+"previous install of Linux or from another partitionning tool). In other\n"
+"cases, hard drive partitions must be defined. This operation consists of\n"
+"logically dividing the computer's hard drive capacity into separate\n"
+"areas for use.\n"
+"\n"
+"\n"
+"If you have to create new partitions, use \"Auto allocate\" to "
+"automatically\n"
+"create partitions for Linux. You can select the disk for partitionning by\n"
+"clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"\n"
+"Two common partition are: the root partition (/), which is the starting\n"
+"point of the filesystem's directory hierarchy, and /boot, which contains\n"
+"all files necessary to start the operating system when the\n"
+"computer is first turned on.\n"
+"\n"
+"\n"
+"Because the effects of this process are usually irreversible, partitioning\n"
+"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
+"simplifies the process so that it need not be. Consult the documentation\n"
+"and take your time before proceeding."
+msgstr ""
+"Most megadhatod, hogy melyik part�ci�kra telep�lj�n a Linux-Mandrake,\n"
+"ha m�r l�teznek a part�ci�k (egy r�gebbi Linuxb�l, vagy ha m�r l�trehoztad\n"
+"�ket valamilyen m�sik part�cion�l� programmal). Ha m�g nincsenek \n"
+"part�ci�id, itt az ideje, hogy l�trehozd �ket. Ez azt jelenti, hogy a\n"
+"fizikai merevlemezt kisebb logikai r�szekre kell osztanod.\n"
+"\n"
+"\n"
+"Ha �j part�ci�kat kell l�trehoznod, haszn�ld az \"Automatikus allok�l�s\"-t\n"
+"�s a DrakX l�trehozza �ket Neked. Kiv�laszthatod a megfelel� merevlemezt,\n"
+"ha a \"hda\"-ra (els� IDE lemez), a \"hdb\"-re (m�sodik IDE lemez) vagy az\n"
+"\"sda\"-ra (els� SCSI lemez) kattintasz.\n"
+"\n"
+"\n"
+"K�t l�nyeges part�ci� a root part�ci� (/), ami a f�jlrendszer k�nyvt�r \n"
+"hierarchi�j�nak kiindul�pontja �s a /boot, ami a rendszer indul�s�hoz \n"
+"(bootol�s�hoz) sz�ks�ges f�jlokat tartalmazza.\n"
+"\n"
+"\n"
+"Mivel a part�cion�l�s hat�sai maradand�ak �s visszaford�thatatlanok, ett�l\n"
+"a m�velett�l sok kev�s tapasztalattal rendelkez� felhaszn�l� retteg.\n"
+"A DiskDrake egyszer�s�ti a m�veletet, teh�t ezent�l senkinek sem kell\n"
+"idegeskednie. Sz�nj r� egy kis id�t �s olvasd el a dokument�ci�t, miel�tt\n"
+"hozz�fogn�l."
+
+#: ../help.pm_.c:90
+msgid ""
+"Any partitions that have been newly defined must be formatted for\n"
+"use (formatting meaning creating a filesystem). At this time, you may\n"
+"wish to re-format some already existing partitions to erase the data\n"
+"they contain. Note: it is not necessary to re-format pre-existing\n"
+"partitions, particularly if they contain files or data you wish to keep.\n"
+"Typically retained are /home and /usr/local."
+msgstr ""
+"Minden �jonnan l�trehozott part�ci�t form�zni kell (a form�z�s azt \n"
+"jelenti, hogy egy f�jlrendszert kell r� l�trehozni). Itt az alkalom,\n"
+"hogy �jraform�zz esetleg egyes kor�bbr�l megmaradt part�ci�kat �s\n"
+"t�r�ld az adatokat r�luk.\n"
+"Megjegyz�s: nem musz�j �jraform�zni a m�r l�tez� part�ci�kat, f�leg abban\n"
+"az esetben, ha sz�ks�ged van a r�gi adatokra. Tipikusan ilyenek a /home\n"
+"�s a /usr/local filerendszerek."
+
+#: ../help.pm_.c:98
+msgid ""
+"You may now select the packages you wish to install.\n"
+"\n"
+"\n"
+"First you can select group of package to install or upgrade. After that\n"
+"you can select more packages according to the total size you wish to\n"
+"select.\n"
+"\n"
+"\n"
+"If you are in expert mode, you can select packages individually.\n"
+"Please note that some packages require the installation of others.\n"
+"These are referred to as package dependencies. The packages you select,\n"
+"and the packages they require will be automatically selected for\n"
+"install. It is impossible to install a package without installing all\n"
+"of its dependencies."
+msgstr ""
+"Itt v�laszthatod ki, hogy milyen csomagokat szeretn�l telep�teni.\n"
+"\n"
+"\n"
+"El�sz�r kiv�laszthatsz egy csomag csoportot (telep�t�sre vagy friss�t�sre), "
+"majd a kijel�lt csomagokhoz hozz�adhatsz egyenk�nt is csomagokat az "
+"ig�nyeidnek �s a rendelkez�sedre �ll� helynek a f�ggv�ny�ben.\n"
+"\n"
+"\n"
+"Ha \"Halad�\" m�dban telep�tesz, kiv�laszthatod a csomagokat egyes�vel is.\n"
+"Ne felejtsd el, hogy egyes csomagoknak m�s csomagokra is sz�ks�g�k van,\n"
+"ezt h�vjuk f�gg�s�gi viszonynak (egyik csomag a m�sik el�felt�tele). \n"
+"A telep�t� auotmatikusan telep�ti az �sszes kiv�lasztott csomagot �s azok \n"
+"el�felt�teleit. Nem telep�theted fel a csomagokat az el�felt�telek "
+"kiel�g�t�se n�lk�l."
+
+#: ../help.pm_.c:114
+msgid ""
+"The packages selected are now being installed. This operation\n"
+"should take a few minutes unless you have chosen to upgrade an\n"
+"existing system, in that case it can take more time even before\n"
+"upgrade starts."
+msgstr ""
+"A kiv�lasztott csomagokat most telep�ti a Telep�t�. Ez a m�velet n�h�ny\n"
+"percig eltarthat. Ez al�l kiv�telt k�pez, ha egy l�tez� rendszert\n"
+"friss�tesz, ebben az esetben a folyamat t�bb id�t vehet ig�nybe."
+
+#: ../help.pm_.c:120
+msgid ""
+"If DrakX failed to find your mouse, or if you want to\n"
+"check what it has done, you will be presented the list of mice\n"
+"above.\n"
+"\n"
+"\n"
+"If you agree with DrakX' settings, just jump to the section\n"
+"you want by clicking on it in the menu on the left. Otherwise,\n"
+"choose a mouse type in the menu which you think is the closest\n"
+"match for your mouse.\n"
+"\n"
+"\n"
+"In case of a serial mouse, you will also have to tell DrakX\n"
+"which serial port it is connected to."
+msgstr ""
+"Ha a DrakX nem tudta meghat�rozni az egered t�pus�t, vagy csak ellen�rizni\n"
+"akarod a be�ll�t�st, felaj�nl Neked egy list�t a k�l�nb�z� egerekkel.\n"
+"\n"
+"\n"
+"Ha egyet�rtesz a DrakX be�ll�t�saival, ugorhatsz a k�vetkez� r�szre a bal\n"
+"oldalon l�v� men� seg�ts�g�vel. Ha nem, akkor v�lassz egy egeret a\n"
+"list�b�l, lehet�leg egy olyat, ami k�zel �ll az egered t�pus�hoz.\n"
+"\n"
+"\n"
+"Ha az egered soros portra csatlakozik, meg kell mondanod, hogy melyikre."
+
+#: ../help.pm_.c:135
+msgid ""
+"Please select the correct port. For example, the COM1 port in MS Windows\n"
+"is named ttyS0 in Linux."
+msgstr ""
+"K�rlek v�lszd ki a megfel� portot. P�ld�ul a Windows-os COM1-et Linux alatt "
+"ttyS0-nak h�vj�k."
+
+#: ../help.pm_.c:139
+msgid ""
+"This section is dedicated to configuring a local area\n"
+"network (LAN) or a modem.\n"
+"\n"
+"Choose \"Local LAN\" and DrakX will\n"
+"try to find an Ethernet adapter on your machine. PCI adapters\n"
+"should be found and initialized automatically.\n"
+"However, if your peripheral is ISA, autodetection will not work,\n"
+"and you will have to choose a driver from the list that will appear then.\n"
+"\n"
+"\n"
+"As for SCSI adapters, you can let the driver probe for the adapter\n"
+"in the first time, otherwise you will have to specify the options\n"
+"to the driver that you will have fetched from documentation of your\n"
+"hardware.\n"
+"\n"
+"\n"
+"If you install a Linux-Mandrake system on a machine which is part\n"
+"of an already existing network, the network administrator will\n"
+"have given you all necessary information (IP address, network\n"
+"submask or netmask for short, and hostname). If you're setting\n"
+"up a private network at home for example, you should choose\n"
+"addresses.\n"
+"\n"
+"\n"
+"Choose \"Dialup with modem\" and the Internet connection with\n"
+"a modem will be configured. DrakX will try to find your modem,\n"
+"if it fails you will have to select the right serial port where\n"
+"your modem is connected to."
+msgstr ""
+"Ez a r�sz arra hivatott, hogy seg�tsen be�ll�tani a lok�lis h�l�zatot\n"
+"(LAN) vagy a modemet.\n"
+"\n"
+"V�laszd a \"Lok�lis h�l�zat (LAN)\"-t �s a DrakX megpr�b�lja megkeresni a\n"
+"h�l�zati k�rty�t a g�pedben. A PCI-os k�rty�kat t�bbnyire megtal�lja �s\n"
+"be�ll�tja automatikusan. Ezzel ellent�tben, ha ISA-s k�rty�d van, az\n"
+"automatikus felismer�s nem fog m�k�dni, ekkor k�zzel kell kiv�lasztanod\n"
+"a megfelel� driver-t a megjelen� list�b�l.\n"
+"\n"
+"\n"
+"Mint a SCSI k�rty�n�l, hagyhatod, hogy a driver ismerje fel a hardvert,\n"
+"de ha ez nem m�k�dik, k�zzel kell opci�kat megadnod, amiket megtal�lsz\n"
+"a hardver dokument�ci�j�ban.\n"
+"\n"
+"\n"
+"Ha a Linux-Mandrake-et egy m�r h�l�zathoz k�t�tt g�pre telep�ted, a\n"
+"h�l�zat rendszergazd�ja l�t el a sz�ks�ges inform�ci�kkal (IP c�m, \n"
+"h�l�zati maszk �s g�pn�v). Ha otthon hozol l�tre egy saj�t h�l�zatot,\n"
+"Neked kell a c�meket kiv�lasztanod.\n"
+"\n"
+"\n"
+"V�laszd a \"Csatlakoz�s modemmel\"-t �s a DrakX megpr�b�lja be�ll�tani a\n"
+"modemet. Ha nem siker�lne neki, add meg a soros portot, amihez a modem\n"
+"csatlakozik."
+
+#: ../help.pm_.c:169
+msgid ""
+"Enter:\n"
+"\n"
+" - IP address: if you don't know it, ask your network administrator or "
+"ISP.\n"
+"\n"
+"\n"
+" - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
+"sure, ask your network administrator or ISP.\n"
+"\n"
+"\n"
+" - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
+"this option. If selected, no value is needed in \"IP address\". If you are\n"
+"not sure, ask your network administrator or ISP.\n"
+msgstr ""
+"Add meg:\n"
+"\n"
+" - az IP c�met: ha nem tudod mi az IP c�med, k�rdezd meg a h�l�zat \n"
+"adminisztr�tor�t.\n"
+"\n"
+" - a h�l�zati maszkot: �ltal�ban a \"255.255.255.0\" j� v�laszt�s. Ha nem "
+"vagy\n"
+"benne biztos, k�rdezd meg a h�lozat adminisztr�tor�t.\n"
+"\n"
+"\n"
+" - automatikus IP c�m meg�llap�t�s: v�laszd ezt, ha a h�l�zatodon bootp "
+"vagy \n"
+"dhcp seg�ts�g�vel kapj�k a g�pek az IP c�m�ket. Ha ez a helyzet, az \"IP "
+"c�m\" \n"
+"r�szt �resen hagyhatod. Ha k�ts�geid vannak, k�rdezd meg a h�l�zat \n"
+"adminisztr�tor�t.\n"
+
+#: ../help.pm_.c:184
+msgid ""
+"You may now enter dialup options. If you're not sure what to enter, the\n"
+"correct information can be obtained from your ISP."
+msgstr ""
+"Most megadhatod a telefonos Internet csatlakoz�soddal kapcsolatos opci�kat.\n"
+"Ha nem vagy benne biztos, hogy mit kell ide be�rni, az Internet "
+"szolg�ltat�d\n"
+"val�sz�n�leg tud seg�teni."
+
+#: ../help.pm_.c:188
+msgid ""
+"If you will use proxies, please configure them now. If you don't know if\n"
+"you will use proxies, ask your network administrator or your ISP."
+msgstr ""
+"Ha proxy-kat fogsz haszn�lni, itt az id�, hogy be�ll�tsd �ket. Ha nem \n"
+"tudod, hogy fogsz-e proxy-kat haszn�lni, k�rdezd meg a h�l�zat \n"
+"adminisztr�tor�t vagy az Internet szolg�ltat�t."
+
+#: ../help.pm_.c:192
+msgid ""
+"You can install cryptographic package if your internet connection has been\n"
+"set up correctly. First choose a mirror where you wish to download packages "
+"and\n"
+"after that select the packages to install.\n"
+"\n"
+"Note you have to select mirror and cryptographic packages according\n"
+"to your legislation."
+msgstr ""
+"A titkos�t�ssal kapcsolatos csomagokat akkor tudod csak feltelep�teni, ha "
+"az\n"
+"Internet kapcsolatod rendesen be van �ll�tva. El�sz�r v�laszd ki, hogy "
+"melyik \n"
+"t�k�r-kiszolg�l�r�l szeretn�d let�lteni a csomagokat, majd jel�ld ki magukat "
+"\n"
+"a csomagokat.\n"
+"\n"
+"Figyelj arra, hogy a helyi t�rv�nyeknek megfele�en v�laszd meg a\n"
+"t�k�rkiszolg�l�t �s a titkos�t�ssal kapcsolatos csomagokat."
+
+#: ../help.pm_.c:200
+msgid ""
+"You can now select your timezone according to where you live.\n"
+"\n"
+"\n"
+"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
+"in local time according to the time zone you have selected."
+msgstr ""
+"Kiv�laszthatod az id�z�n�t, aszerint, hogy hol �lsz.\n"
+"\n"
+"\n"
+"A Linux GMT, azaz \"Greenwich Meridian Time\"-ban m�ri az id�t, majd a\n"
+"megadott id�z�na alapj�n sz�m�tja azt �t helyi id�re."
+
+#: ../help.pm_.c:207
+msgid "Help"
+msgstr "Seg�ts�g"
+
+#: ../help.pm_.c:210
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer. The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+"A Linux sokf�le nyomtat�t tud kezelni. A t�pust�l f�gg�en m�s �s m�s a\n"
+"telep�t�s menete.\n"
+"\n"
+"\n"
+"Ha a nyomtat�d a g�phez van k�tve (a nyomtat� porton), v�laszd a\n"
+"\"Lok�lis Nyomtat�\"-t. Ekkor meg kell mondanod a telep�t�nek, hogy\n"
+"melyik porton van a nyomtat�, valamint ki kell v�lasztanod a megfelel�\n"
+"filtert.\n"
+"\n"
+"\n"
+"Ha egy t�voli UNIX g�pre csatlakoztatott nyomtat�t szeretn�l el�rni,\n"
+"v�laszd a \"T�voli lpd\"-t. Ahhoz, hogy ez m�k�dj�n, nem kell\n"
+"felhaszn�l�i nevet vagy jelsz�t megadni, de ismerni kell a t�voli\n"
+"g�pen l�v� nyomtat�sor pontos nev�t.\n"
+"\n"
+"\n"
+"Ha egy SMB nyomtat�t akarsz el�rni (ez azt jelenti, hogy a nyomtat� egy\n"
+"t�voli Windows9x/NT g�phez van k�tve), meg kell adnod a t�voli g�p SMB\n"
+"nev�t (ami nem egyezik meg a TCP/IP-n haszn�lt g�pn�vvel), val�sz�n�leg\n"
+"az IP c�m�t valamit egy felhaszn�l�i nevet, a munkacsoport nev�t �s egy\n"
+"jelsz�t �s term�szetesen a nyomtat� nev�t is. Ugyanez igaz a Netware\n"
+"nyomtat� eset�n is, azzal a kiv�tellel, hogy nem kell munkacsoportot\n"
+"megadni."
+
+#: ../help.pm_.c:233
+msgid ""
+"You can now enter the root password for your Linux-Mandrake\n"
+"system. The password must be entered twice to verify that both\n"
+"password entries are identical.\n"
+"\n"
+"\n"
+"Root is the administrator of the system, and is the only user\n"
+"allowed to modify the system configuration. Therefore, choose\n"
+"this password carefully! Unauthorized use of the root account can\n"
+"be extremely dangerous to the integrity of the system and its data,\n"
+"and other systems connected to it. The password should be a\n"
+"mixture of alphanumeric characters and a least 8 characters long. It\n"
+"should *never* be written down. Do not make the password too long or\n"
+"complicated, though: you must be able to remember without too much\n"
+"effort."
+msgstr ""
+"Most kell megadnod a Linux-Mandrake-ed root jelszav�t. Ugyanazt a\n"
+"jelsz�t kell k�tszer be�rnod, ezzel ellen�rz�m, hogy nem g�peled el.\n"
+"\n"
+"\n"
+"A root felhaszn�l� a rendszer adminisztr�tora, � az egyetlen, aki a\n"
+"rendszer be�ll�t�sait megv�ltoztathatja, ez�rt j�l v�laszd meg ezt a\n"
+"jelsz�t.\n"
+"A root felhaszn�l� jogosulatlan haszn�lata nagyon k�ros lehet a\n"
+"rendszer �ps�ge szempontj�b�l, valamint m�s, a h�l�zaton kereszt�l\n"
+"csatlakoz� rendszereket is vesz�lyeztethet. A jelsz�nak alfanumerikus\n"
+"karakterek kever�k�t kell tartalmaznia �s legal�bb 8 karakter hossz�\n"
+"kell legyen.\n"
+"Ezt a jelsz�t *soha* ne �rd le. Ne legyen a jelsz� t�l hossz� vagy t�l\n"
+"bonyolult, hiszen eml�kezned kell r�!"
+
+#: ../help.pm_.c:249
+msgid ""
+"To enable a more secure system, you should select \"Use shadow file\" and\n"
+"\"Use MD5 passwords\"."
+msgstr ""
+"A rendszer biztons�ga n�vel�se �rdek�ben v�laszd ki a \"Shadow f�jl \n"
+"alkalmaz�sa\" �s az \"MD5 jelszavak alkalmaz�sa\" opci�kat."
+
+#: ../help.pm_.c:253
+msgid ""
+"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
+"network administrator."
+msgstr ""
+"Ha a h�l�zatod haszn�l NIS-t, v�laszd ki a \"NIS haszn�lata\" opci�t. Ha nem "
+"\n"
+"tudod, hogy a h�l�zaton van-e NIS szolg�ltat�s, k�rdezd meg a h�l�zati \n"
+"adminisztr�tort."
+
+#: ../help.pm_.c:257
+msgid ""
+"You may now create one or more \"regular\" user account(s), as\n"
+"opposed to the \"privileged\" user account, root. You can create\n"
+"one or more account(s) for each person you want to allow to use\n"
+"the computer. Note that each user account will have its own\n"
+"preferences (graphical environment, program settings, etc.)\n"
+"and its own \"home directory\", in which these preferences are\n"
+"stored.\n"
+"\n"
+"\n"
+"First of all, create an account for yourself! Even if you will be the only "
+"user\n"
+"of the machine, you may NOT connect as root for daily use of the system: "
+"it's a\n"
+"very high security risk. Making the system unusable is very often a typo "
+"away.\n"
+"\n"
+"\n"
+"Therefore, you should connect to the system using the user account\n"
+"you will have created here, and login as root only for administration\n"
+"and maintenance purposes."
+msgstr ""
+"Most l�trehozhatsz egy vagy t�bb \"mezei\" felhaszn�l�t (ellent�tben a\n"
+"\"privilegiz�lt\" root felhaszn�l�val). L�trehozhatsz egy vagy t�bb\n"
+"felhaszn�l�t mindenkinek, aki haszn�lni szeretn� a g�pet. Megjegyz�s:\n"
+"minden felhaszn�l�nak meglesznek a saj�t be�ll�t�sai (grafikus\n"
+"k�rnyezet, program be�ll�t�sok, stb...) �s a saj�t \"home k�nyvt�ra\",\n"
+"ahol ezek a be�ll�t�sok vannak.\n"
+"\n"
+"\n"
+"El�sz�r is csin�lj egy felhaszn�l�t saj�t magadnak! Akkor is, ha Te\n"
+"leszel az egyetlen felhaszn�l� a g�pen, NE haszn�ld a root felhaszn�l�t\n"
+"a mindennapi teend�idhez: ez nagyon vesz�lyes, a teljes rendszer\n"
+"haszn�lhatalann� t�tele sokszor csak egy apr� elg�pel�sen m�lik.\n"
+"\n"
+"\n"
+"Ez�rt a most l�trehozott t�masz�mmal l�pj be alapesetben �s a root\n"
+"felhaszn�l�t csak adminisztr�ci�s okokb�l vagy a rendszer\n"
+"karbantart�sa miatt haszn�ld."
+
+#: ../help.pm_.c:276
+msgid ""
+"It is strongly recommended that you answer \"Yes\" here. If you install\n"
+"Microsoft Windows at a later date it will overwrite the boot sector.\n"
+"Unless you have made a bootdisk as suggested, you will not be able to\n"
+"boot into Linux any more."
+msgstr ""
+"K�rlek v�laszolj \"Igen\"-nel! Ha p�ld�ul k�s�bb telep�ted a Microsoft \n"
+"Windows-t, az fel�l�rja a boot szektort. Ha ilyen esetben nincs boot\n"
+"floppy-d, nem tudod t�bbet elind�tani a Linuxot!"
+
+#: ../help.pm_.c:282
+msgid ""
+"You need to indicate where you wish\n"
+"to place the information required to boot to Linux.\n"
+"\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of\n"
+"drive (MBR)\"."
+msgstr ""
+"Itt meg kell adnod, hogy hova ker�lj�n a Linux bootol�s�hoz sz�ks�ges \n"
+"inform�ci�.\n"
+"\n"
+"\n"
+"Hacsak nem tudod nagyon pontosan, hogy mit csin�lsz, v�laszd a\n"
+"\"Lemez els� szektora (MBR)\"-t."
+
+#: ../help.pm_.c:290
+msgid ""
+"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
+"(the master drive on the primary channel)."
+msgstr ""
+"Ha nincs kimondott ok az ellenkez�j�re, v�laszd a \"/dev/hda\" -t\n"
+"(ez a \"master\" meghajt� az els� IDE csatorn�n)"
+
+#: ../help.pm_.c:294
+msgid ""
+"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
+"Normally they are correctly detected during installation. If you don't\n"
+"see yours detected, you can add one or more now.\n"
+"\n"
+"\n"
+"If you don't want that everybody could access at one of them, you can "
+"remove\n"
+"it now (a boot disk will be needed to boot it)."
+msgstr ""
+"A LILO (a LInux LOader) be tudja t�lteni a Linuxot vagy m�s oper�ci�s \n"
+"rendszereket is. Optim�lis esetben ezeket az egy�b oper�ci�s rendszereket\n"
+"a telep�t�s sor�n a LILO �szreveszi. Ha a rendszer m�gsem tal�lja meg \n"
+"valamelyik kor�bban feltelep�tett oper�ci�s rendszert, akkor azt most \n"
+"megadhatod k�zzel.\n"
+"\n"
+"\n"
+"Ha nem akarod, hogy valamelyik oper�ci�s rendszerhez b�rki hozz�f�rjen, "
+"vedd\n"
+"ki a list�b�l (ezek ut�n csak boot floppyr�l tudod majd ind�tani!!)."
+
+#: ../help.pm_.c:303
+msgid ""
+"LILO main options are:\n"
+" - Boot device: Sets the name of the device (e.g. a hard disk\n"
+"partition) that contains the boot sector. Unless you know specifically\n"
+"otherwise, choose \"/dev/hda\".\n"
+"\n"
+"\n"
+" - Linear: Generate linear sector addresses instead of\n"
+"sector/head/cylinder addresses. Linear addresses are translated at run\n"
+"time and do not depend on disk geometry. Note that boot disks may not be\n"
+"portable if \"linear\" is used, because the BIOS service to determine the\n"
+"disk geometry does not work reliably for floppy disks. When using\n"
+"\"linear\" with large disks, /sbin/lilo may generate references to\n"
+"inaccessible disk areas, because 3D sector addresses are not known\n"
+"before boot time.\n"
+"\n"
+"\n"
+" - Compact: Tries to merge read requests for adjacent sectors into a\n"
+"single read request. This drastically reduces load time and keeps the\n"
+"map smaller. Using \"compact\" is especially recommended when booting from\n"
+"a floppy disk.\n"
+"\n"
+"\n"
+" - Delay before booting default image: Specifies the number in tenths\n"
+"of a second the boot loader should wait before booting the first image.\n"
+"This is useful on systems that immediately boot from the hard disk after\n"
+"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
+"omitted or is set to zero.\n"
+"\n"
+"\n"
+" - Video mode: This specifies the VGA text mode that should be selected\n"
+"when booting. The following values are available: \n"
+" * normal: select normal 80x25 text mode.\n"
+" * <number>: use the corresponding text mode."
+msgstr ""
+"A LILO f�bb opci�i:\n"
+" - Boot eszk�z: be�ll�tja annak az eszk�znek (�ltal�ban lemez part�ci�nak) "
+"a \n"
+"nev�t, amin a boot szektor tal�lhat�. �ltal�nos esetben ez a /dev/hda\"\n"
+"\n"
+"\n"
+" - Linear: Line�risszektor c�meket gener�l a szektor/fej/cilinder c�mz�s \n"
+"helyett. A line�ris c�meket a rendszer fut�sid�ben konvert�lja, nem "
+"f�ggenek\n"
+"a merevlemez geometri�j�t�l. Megjegyz�s: a boot floppyk esetleg nem \n"
+"hordozhat�k (nem haszn�lhat�k m�s rendszerrel) ha a \"linear\" opci�t "
+"haszn�lod,\n"
+"mert a BIOS-nak az a r�sze, ami a lemez geometri�j�t �llap�tja meg nem \n"
+"m�k�dik megb�zhat�an floppy lemezekkel. Ha a \"linear\"-t nagy merevlemezzel "
+"haszn�lod, a /sbin/lilo lehet, hogy nem el�rhet� lemezter�letekre fog "
+"hivatkozni, mert a 3D szektor c�mek nem ismertek bootol�s el�tt.\n"
+"\n"
+"\n"
+" - Compact: megpr�b�lja a szomsz�dos szektorokra vonatkoz� olvas�si "
+"k�r�seket\n"
+"egy olvas�si k�r�sbe �sszevonni. Ez drasztikusan cs�kkenti a bet�lt�s "
+"idej�t\n"
+"�s minim�lisan tartja a \"map\" m�ret�t. A \"compact\" opci� haszn�lata "
+"fokozottan\n"
+"aj�nlott, ha floppyr�l bootolsz.\n"
+"\n"
+"\n"
+" - K�sleltet�s az alap�rtelmezett image bet�lt�se el�tt: megadja \n"
+"(tizedm�sodpercben) hogy a boot loader mennyi id�t v�rjon, miel�tt bet�lti\n"
+"az els� image-et. Ez azokn�l a rendszerekn�l hasznos, amelyek a "
+"billenty�zet\n"
+"bekapcsol�sa ut�n azonnal a merevlemezr�l bootolnak. A boot loader nem v�r, "
+"ha\n"
+"a \"delay\" opci� nincs megadva vagy az �rt�ke 0.\n"
+"\n"
+"\n"
+" - Vide� m�d: azt �ll�tja be, hogy milyen VGA sz�veges �zemm�dban induljon "
+"\n"
+"el a rendszer. A k�vetkez� �rt�kek lehets�gesek:\n"
+" * norm�l: norm�lis 80x25-os sz�veges m�d.\n"
+" * <sz�m>: a megfelel� sz�veges m�dot haszn�lja."
+
+#: ../help.pm_.c:338
+msgid ""
+"Now it's time to configure the X Window System, which is the\n"
+"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
+"you must configure your video card and monitor. Most of these\n"
+"steps are automated, though, therefore your work may only consist\n"
+"of verifying what has been done and accept the settings :)\n"
+"\n"
+"\n"
+"When the configuration is over, X will be started (unless you\n"
+"ask DrakX not to) so that you can check and see if the\n"
+"settings suit you. If they don't, you can come back and\n"
+"change them, as many times as necessary."
+msgstr ""
+"El�rkezett az ideje, hogy be�ll�tsd a Linuxos grafikus k�rnyezet\n"
+"magj�t, az X Window Rendszert. Ehhez be kell �ll�tanod a videok�rty�dat\n"
+"�s a monitorodat. Ez t�bbnyire automatikusan zajlik, ez�rt Neked\n"
+"�ltal�ban csak el kell fogadnod a felaj�nlott be�ll�t�sokat :)\n"
+"\n"
+"\n"
+"Amikor befejezed a be�ll�t�st, a DrakX elind�tja az X-et (hacsak nem k�red,\n"
+"hogy hagyja ki ezt a l�p�st), �gy ellen�rizni tudod, hogy j�l m�k�dik-e.\n"
+"Ha valami gond lenne a be�ll�t�ssal, mind�g vissza tudsz l�pni ebbe a\n"
+"men�be �s kipr�b�lhatsz m�s �rt�keket is, ah�nyszor csak akarsz."
+
+#: ../help.pm_.c:351
+msgid ""
+"If something is wrong in X configuration, use these options to correctly\n"
+"configure the X Window System."
+msgstr ""
+"Ha valami nem j� az X konfigur�ci�j�ban, haszn�ld ezeket az opci�kat �s \n"
+"jav�tsd ki a hib�t."
+
+#: ../help.pm_.c:355
+msgid ""
+"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
+"\"No\"."
+msgstr ""
+"Ha grafikus fel�leten szeretn�l bejelentkezni, v�laszd a \"Igen\"-t, "
+"m�sk�ppen\n"
+"v�laszd a \"Nem\"-et."
+
+#: ../help.pm_.c:359
+msgid ""
+"You can now select some miscellaneous options for you system.\n"
+"\n"
+" - Use hard drive optimizations: This option can improve hard disk\n"
+"accesses but is only for advanced users, it can ruin your hard drive if\n"
+"used incorrectly. Use it only if you know how.\n"
+"\n"
+"\n"
+" - Choose security level: You can choose a security level for your\n"
+"system.\n"
+" Please refer to the manual for more information.\n"
+"\n"
+"\n"
+" - Precise RAM size if needed: In some cases, Linux is unable to\n"
+"correctly detect all the installed RAM on some systems. If this is the\n"
+"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
+"normal.\n"
+"\n"
+"\n"
+" - Removable media automounting: If you would prefer not to manually\n"
+"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
+"\"umount\", select this option. \n"
+"\n"
+"\n"
+" - Enable Num Lock at startup: If you want Number Lock enabled after\n"
+"booting, select this option (Note: Num Lock will still not work under\n"
+"X)."
+msgstr ""
+"Itt a rendszered tov�bbi opci�it �ll�thatod be.\n"
+"\n"
+" - Merevlemez meghajt� optimaliz�l�sa: Ez az opci� gyors�thatja a lemez "
+"el�r�s�t, de csak halad� felhaszn�l�knak aj�nlott, ha nem megfelel�en "
+"haszn�lod, \n"
+"t�nkreteheti a merevlemezedet. Csak akkor haszn�ld, ha tudod, hogy hogyan \n"
+"kell.\n"
+"\n"
+"\n"
+" - Biztons�gi szint kiv�laszt�sa: Itt v�laszthatod ki a rendszered \n"
+"biztons�gi szintj�t.\n"
+"Tov�bbi inform�ci�kat a k�zik�nyvben tal�lsz.\n"
+"\n"
+"\n"
+" - Fizikai RAM m�rete: Bizonyos esetekben a Linux nem l�tja az �sszes "
+"RAMot.\n"
+"Ha ez a helyzet, add meg a helyes m�retet. Megjegyz�s: ha az elt�r�s csak 2\n"
+"vagy 4 MB (a val�di �s az automatikusan be�ll�tott mennyis�g k�z�tt), az\n"
+"norm�lisnak tekinthet�.\n"
+"\n"
+"\n"
+" - Elt�v�l�that� m�dia, automatikus mountol�s: ha nem szeretn�d minden \n"
+"esetben k�zzel mountolni a cser�lhet� m�di�kat (floppy, CD, Zip), ezt az\n"
+"opci�t Neked tal�lt�k ki.\n"
+"\n"
+"\n"
+" - Num Lock bekapcsol�sa bootol�skor: Ha azt szertn�d, hogy a Num Lock \n"
+"bekapcsolt �llapotban legyen bootol�s ut�n, v�laszd ezt az opci�t. \n"
+"(Megjegyz�s: A num Lock bekapcsol�sa tov�bbra sem m�k�dik X alatt)."
+
+#: ../help.pm_.c:387
+msgid ""
+"Your system is going to reboot.\n"
+"\n"
+"After rebooting, your new Linux Mandrake system will load automatically.\n"
+"If you want to boot into another existing operating system, please read\n"
+"the additional instructions."
+msgstr ""
+"A rendszer most �jraindul.\n"
+"\n"
+"Bootol�s ut�n automatikusan az �j mandrake rendszered fog elindulni.\n"
+"Ha egy m�sik kor�bban telep�tett oper�ci�s rendszert szeretn�l ink�bb \n"
+"ind�tani, olvasd el a tov�bbi utas�t�sokat is."
+
+#: ../install2.pm_.c:43
+msgid "Choose your language"
+msgstr "V�lassz nyelvet"
+
+#: ../install2.pm_.c:44
+msgid "Select installation class"
+msgstr "V�lassz telep�t�si m�dot"
+
+#: ../install2.pm_.c:45
+msgid "Setup SCSI"
+msgstr "SCSI be�ll�t�sa"
+
+#: ../install2.pm_.c:46
+msgid "Choose install or upgrade"
+msgstr "Telep�t�s vagy friss�t�s"
+
+#: ../install2.pm_.c:47
+msgid "Configure mouse"
+msgstr "Eg�r be�ll�t�sa"
+
+#: ../install2.pm_.c:48
+msgid "Choose your keyboard"
+msgstr "Billenty�zet kiv�laszt�sa"
+
+#: ../install2.pm_.c:49
+msgid "Miscellaneous"
+msgstr "Egyebek"
+
+#: ../install2.pm_.c:50
+msgid "Setup filesystems"
+msgstr "F�jlrendszerek be�ll�t�sa"
+
+#: ../install2.pm_.c:51
+msgid "Format partitions"
+msgstr "Part�ci�k form�z�sa"
+
+#: ../install2.pm_.c:52
+msgid "Choose packages to install"
+msgstr "Csomagok kiv�laszt�sa"
+
+#: ../install2.pm_.c:53
+msgid "Install system"
+msgstr "Rendszer telep�t�se"
+
+#: ../install2.pm_.c:54
+msgid "Configure networking"
+msgstr "H�l�zat be�ll�t�sa"
+
+#: ../install2.pm_.c:55
+msgid "Cryptographic"
+msgstr "Titkos�t�s"
+
+#: ../install2.pm_.c:56
+msgid "Configure timezone"
+msgstr "Id�z�na be�ll�t�sa"
+
+#: ../install2.pm_.c:58
+msgid "Configure printer"
+msgstr "Nyomtat� be�ll�t�sa"
+
+#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:577
+msgid "Set root password"
+msgstr "root jelsz� be�ll�t�sa"
+
+#: ../install2.pm_.c:60
+msgid "Add a user"
+msgstr "Felhaszn�l� hozz�ad�sa"
+
+#: ../install2.pm_.c:61
+msgid "Create a bootdisk"
+msgstr "Ind�t�lemez k�sz�t�se"
+
+#: ../install2.pm_.c:62
+msgid "Install bootloader"
+msgstr "Bootmanager telep�t�se"
+
+#: ../install2.pm_.c:63
+msgid "Configure X"
+msgstr "Az X be�ll�t�sa"
+
+#: ../install2.pm_.c:64
+msgid "Exit install"
+msgstr "Kil�p�s a telep�t�b�l"
+
+#: ../install2.pm_.c:83
+msgid "beginner"
+msgstr "kezd�"
+
+#: ../install2.pm_.c:83
+msgid "developer"
+msgstr "fejleszt�"
+
+#: ../install2.pm_.c:83
+msgid "expert"
+msgstr "halad�"
+
+#: ../install2.pm_.c:83
+msgid "server"
+msgstr "szerver"
+
+#: ../install2.pm_.c:311
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+
+#: ../install2.pm_.c:327
+msgid "Not enough swap to fulfill installation, please add some"
+msgstr "Elfogyott a swap ter�let, n�veld meg a telep�t�s befejez�s�hez"
+
+#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+"Nem tudom beolvasni a part�ci�s t�bl�t, t�ls�gosan el van rontva :(\n"
+"Megpr�b�lom t�r�lni a rossz part�ci�kat"
+
+#: ../install_any.pm_.c:210
+msgid ""
+"DiskDrake failed to read correctly the partition table.\n"
+"Continue at your own risk!"
+msgstr ""
+"A DiskDrake nem tudta rendesen beolvasni a part�ci�s t�bl�t.\n"
+"Folytat�s saj�t felel�ss�gedre!"
+
+#: ../install_any.pm_.c:220
+msgid "Searching root partition."
+msgstr "Root part�ci� keres�se."
+
+#: ../install_any.pm_.c:249
+msgid "Information"
+msgstr "Inform�ci�"
+
+#: ../install_any.pm_.c:250
+#, c-format
+msgid "%s: This is not a root partition, please select another one."
+msgstr "%s: Ez nem egy root part�ci�, v�lassz m�sikat."
+
+#: ../install_any.pm_.c:252
+msgid "No root partition found"
+msgstr "Root part�ci� nem tal�lhat�"
+
+#: ../install_any.pm_.c:289
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Nem lehet broadcast-ot haszn�lni NIS tartom�ny n�lk�l"
+
+#: ../install_any.pm_.c:473
+msgid "Error reading file $f"
+msgstr "Olvas�si hiba: $f"
+
+#: ../install_any.pm_.c:479
+#, c-format
+msgid "Bad kickstart file %s (failed %s)"
+msgstr "Hib�s kickstart f�jl %s (hiba %s)"
+
+#: ../install_steps.pm_.c:72
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"Hiba t�rt�nt, de nem tudom sz�pen kezelni :(\n"
+"Folytat�s saj�t felel�ss�gedre."
+
+#: ../install_steps.pm_.c:136
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "A %s mount pont k�tszer van megadva"
+
+#: ../install_steps.pm_.c:295
+#, c-format
+msgid "Welcome to %s"
+msgstr ""
+
+#: ../install_steps.pm_.c:562
+msgid "No floppy drive available"
+msgstr "Nincs el�rhet� floppy meghajt�"
+
+#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "K�vetkez� l�p�s `%s'\n"
+
+#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:294
+msgid "You must have a swap partition"
+msgstr "Kell egy swap part�ci� is"
+
+#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:296
+msgid ""
+"You don't have a swap partition\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nincs swap part�ci�d.\n"
+"\n"
+"Ett�l f�ggetlen�l folytassam?"
+
+#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:317
+msgid "Choose the size you want to install"
+msgstr "Add meg a rendszer m�ret�t"
+
+#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:361
+msgid "Total size: "
+msgstr "�sszm�ret: "
+
+#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:373
+#: ../standalone/rpmdrake_.c:136
+#, c-format
+msgid "Version: %s\n"
+msgstr "Verzi�: %s\n"
+
+#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:374
+#: ../standalone/rpmdrake_.c:137
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "M�ret: %d MB\n"
+
+#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:489
+msgid "Choose the packages you want to install"
+msgstr "V�laszd ki a telep�tend� csomagokat"
+
+#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:492
+msgid "Info"
+msgstr "Info"
+
+#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:500
+#: ../install_steps_interactive.pm_.c:81 ../standalone/rpmdrake_.c:161
+msgid "Install"
+msgstr "Telep�t�s"
+
+#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:519
+#: ../install_steps_interactive.pm_.c:317
+msgid "Installing"
+msgstr "Telep�t�s"
+
+#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:526
+msgid "Please wait, "
+msgstr "K�rem v�rjon, "
+
+#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:528
+msgid "Time remaining "
+msgstr "H�tral�v� id� "
+
+#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:529
+msgid "Total time "
+msgstr "�sszid� "
+
+#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:534
+#: ../install_steps_interactive.pm_.c:317
+msgid "Preparing installation"
+msgstr "Telep�t�s el�k�sz�t�se"
+
+#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:549
+#, c-format
+msgid "Installing package %s"
+msgstr "%s csomag telep�t�se"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "Go on anyway?"
+msgstr "Ett�l f�ggetlen�l folytassam?"
+
+#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
+msgid "There was an error ordering packages:"
+msgstr "Hiba t�rt�net a csomagok rendez�sekor:"
+
+#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:893
+msgid "Use existing configuration for X11?"
+msgstr "Haszn�ljam a m�r megl�v� X11 be�ll�t�sokat?"
+
+#: ../install_steps_gtk.pm_.c:259
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX now needs to resize your Windows partition. Be careful: this operation "
+"is\n"
+"dangerous. If you have not already done so, you should first exit the\n"
+"installation, run scandisk under Windows (and optionally run defrag), then\n"
+"restart the installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"FIGYELEM!\n"
+"\n"
+"DrakX most �jram�retezi a Windows-os part�ci�t. Vigy�zz, az a m�velet \n"
+"vesz�lyes. Ha m�g nem tetted meg, futtatsd le a scandisk-et a Windows-os \n"
+"part�ci�n (esetleg a defrag-ot is) �s mentsd le az adatokat.\n"
+"Ha mindezzel k�sz vagy, nyomd meg az OK-t."
+
+#: ../install_steps_gtk.pm_.c:278
+msgid "Automatic resizing failed"
+msgstr "Az automatikus �tm�retez�s nem siker�lt"
+
+#: ../install_steps_gtk.pm_.c:312
+msgid ""
+"Now that you've selected desired groups, please choose \n"
+"how many packages you want, ranging from minimal to full \n"
+"installation of each selected groups."
+msgstr ""
+
+#: ../install_steps_gtk.pm_.c:315
+msgid "You will be able to choose more precisely in next step"
+msgstr "R�szletesebben v�logathatsz a k�vetkez� l�p�s r�szek�nt"
+
+#: ../install_steps_gtk.pm_.c:372
+#, fuzzy
+msgid "Bad package"
+msgstr "%d csomag"
+
+#: ../install_steps_gtk.pm_.c:522
+msgid "Estimating"
+msgstr "Megsaccolom..."
+
+#: ../install_steps_gtk.pm_.c:544
+#, c-format
+msgid "%d packages"
+msgstr "%d csomag"
+
+#: ../install_steps_gtk.pm_.c:544
+msgid ", %U MB"
+msgstr ", %U MB"
+
+#: ../install_steps_interactive.pm_.c:37
+msgid "An error occurred"
+msgstr "Hiba l�pett fel"
+
+#: ../install_steps_interactive.pm_.c:54
+msgid "Which language do you want?"
+msgstr "Melyik nyelvet v�lasztod?"
+
+#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
+msgid "Keyboard"
+msgstr "Billenty�zet"
+
+#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
+msgid "What is your keyboard layout?"
+msgstr "Milyen billenty�zetkioszt�st haszn�lsz?"
+
+#: ../install_steps_interactive.pm_.c:79
+msgid "Install/Upgrade"
+msgstr "Telep�t�s/Friss�t�s"
+
+#: ../install_steps_interactive.pm_.c:80
+msgid "Is this an install or an upgrade?"
+msgstr "Telep�t�s vagy friss�t�s?"
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Upgrade"
+msgstr "Friss�t�s"
+
+#: ../install_steps_interactive.pm_.c:89
+msgid "Root Partition"
+msgstr "Root part�ci�"
+
+#: ../install_steps_interactive.pm_.c:90
+msgid "What is the root partition (/) of your system?"
+msgstr "Melyik a root part�ci� a rendszereden?"
+
+#: ../install_steps_interactive.pm_.c:100
+msgid "Recommended"
+msgstr "Javasolt"
+
+#: ../install_steps_interactive.pm_.c:101
+msgid "Customized"
+msgstr "Egyedi"
+
+#: ../install_steps_interactive.pm_.c:102
+msgid "Expert"
+msgstr "Halad�"
+
+#: ../install_steps_interactive.pm_.c:104
+#: ../install_steps_interactive.pm_.c:118
+msgid "Install Class"
+msgstr "Telep�t�si m�d"
+
+#: ../install_steps_interactive.pm_.c:105
+msgid "What installation class do you want?"
+msgstr "Melyik telep�t�si m�dot v�lasztod?"
+
+#: ../install_steps_interactive.pm_.c:114
+msgid "Normal"
+msgstr "Szok�sos"
+
+#: ../install_steps_interactive.pm_.c:115
+msgid "Development"
+msgstr "Fejleszt�"
+
+#: ../install_steps_interactive.pm_.c:116
+msgid "Server"
+msgstr "Szerver"
+
+#: ../install_steps_interactive.pm_.c:119
+msgid "What usage do you want?"
+msgstr "Mire akarod haszn�lni?"
+
+#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
+msgid "What is the type of your mouse?"
+msgstr "Milyen t�pus� egered van?"
+
+#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
+msgid "Mouse Port"
+msgstr "Eg�r Port"
+
+#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
+msgid "Which serial port is your mouse connected to?"
+msgstr "Melyik soros porthoz csatlakozik az egered?"
+
+#: ../install_steps_interactive.pm_.c:157
+msgid "no available partitions"
+msgstr "nincs el�rhet� part�ci�"
+
+#: ../install_steps_interactive.pm_.c:159
+#, c-format
+msgid "(%dMb)"
+msgstr "(%dMb)"
+
+#: ../install_steps_interactive.pm_.c:166
+msgid "Which partition do you want to use as your root partition"
+msgstr "Melyik part�ci�t szeretn�d root part�ci�k�nt haszn�lni?"
+
+#: ../install_steps_interactive.pm_.c:173
+msgid "Choose the mount points"
+msgstr "V�laszd ki a mount pontokat"
+
+#: ../install_steps_interactive.pm_.c:185
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"�jra kell ind�tanod a g�pet, hogy a part�ci�s t�bla v�ltoz�sai �rv�nyre \n"
+"jussanak"
+
+#: ../install_steps_interactive.pm_.c:207
+msgid "Choose the partitions you want to format"
+msgstr "V�laszd ki a form�zand� part�ci�t"
+
+#: ../install_steps_interactive.pm_.c:211
+msgid "Check bad blocks?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:230
+msgid "Looking for available packages"
+msgstr "Az el�rhet� csomagok keres�se"
+
+#: ../install_steps_interactive.pm_.c:236
+msgid "Finding packages to upgrade"
+msgstr "A friss�tend� csomagok keres�se"
+
+#: ../install_steps_interactive.pm_.c:266
+#, c-format
+msgid ""
+"You need %dMB for a full install of the groups you selected.\n"
+"You can go on anyway, but be warned that you won't get all packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:290
+msgid "Package Group Selection"
+msgstr "Csomag csoportok kiv�laszt�sa"
+
+#: ../install_steps_interactive.pm_.c:326
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"A %s csomag telep�t�se\n"
+"%d%%"
+
+#: ../install_steps_interactive.pm_.c:335
+msgid "Post install configuration"
+msgstr "Telep�t�s ut�ni be�ll�t�sok"
+
+#: ../install_steps_interactive.pm_.c:346
+msgid "Keep the current IP configuration"
+msgstr "A jelenlegi IP be�ll�t�s megtart�sa"
+
+#: ../install_steps_interactive.pm_.c:347
+msgid "Reconfigure network now"
+msgstr "A h�l�zat �jrakonfigur�l�sa"
+
+#: ../install_steps_interactive.pm_.c:348
+#: ../install_steps_interactive.pm_.c:360
+msgid "Do not set up networking"
+msgstr "Ne �ll�tsd be a h�l�zatot"
+
+#: ../install_steps_interactive.pm_.c:350
+#: ../install_steps_interactive.pm_.c:358
+msgid "Network Configuration"
+msgstr "H�l�zati be�ll�t�s"
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Local networking has already been configured. Do you want to:"
+msgstr "A lok�lis h�l�zat m�r ben van �ll�tva. Szeretn�d:"
+
+#: ../install_steps_interactive.pm_.c:359
+msgid "Do you want to configure networking for your system?"
+msgstr "Szeretn�d be�ll�tani a h�l�zatot a rendszeren?"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Dialup with modem"
+msgstr "Csatlakoz�s modemmel"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Local LAN"
+msgstr "Lok�lis h�l�zat (LAN)"
+
+#: ../install_steps_interactive.pm_.c:369
+msgid "no network card found"
+msgstr "nem tal�ltam h�l�zati k�rty�t"
+
+#: ../install_steps_interactive.pm_.c:399
+#: ../install_steps_interactive.pm_.c:400
+#, c-format
+msgid "Configuring network device %s"
+msgstr "%s h�l�zati csatol� be�ll�t�sa"
+
+#: ../install_steps_interactive.pm_.c:401
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"K�rlek add meg a g�p IP be�ll�t�sait.\n"
+"Minden mez�be IP sz�mot �rj�l pontozott decim�lis form�tumban (pl.:\n"
+"1.2.3.4)."
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Automatic IP"
+msgstr "Automatikus IP c�m"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "IP address:"
+msgstr "IP c�m:"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Netmask:"
+msgstr "H�l�zati maszk:"
+
+#: ../install_steps_interactive.pm_.c:405
+msgid "(bootp/dhcp)"
+msgstr "(bootp/dhcp)"
+
+#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP c�m, a form�tuma 1.2.3.4"
+
+#: ../install_steps_interactive.pm_.c:429
+msgid "Configuring network"
+msgstr "H�l�zat be�ll�t�sa"
+
+#: ../install_steps_interactive.pm_.c:430
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one"
+msgstr ""
+"�rd be a g�p nev�t.\n"
+"A teljes nevet kell be�rnod, pl: ``mybox.mylab.myco.com''.\n"
+"Be�rhatod m�g az �tj�r�d (gateway) IP c�m�t is, ha van ilyened."
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "DNS server:"
+msgstr "DNS szerver:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway device:"
+msgstr "�tj�r� eszk�z:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway:"
+msgstr "�tj�r� (gateway):"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Host name:"
+msgstr "G�pn�v:"
+
+#: ../install_steps_interactive.pm_.c:447
+msgid "Try to find a modem?"
+msgstr "Megkeressem a modemet?"
+
+#: ../install_steps_interactive.pm_.c:457
+msgid "Which serial port is your modem connected to?"
+msgstr "Melyik soros porthoz csatlakozik a modemed?"
+
+#: ../install_steps_interactive.pm_.c:462
+msgid "Dialup options"
+msgstr "Modemes csatlakoz�s be�ll�t�sai"
+
+#: ../install_steps_interactive.pm_.c:463
+msgid "Connection name"
+msgstr "Csatlakoz�s neve"
+
+#: ../install_steps_interactive.pm_.c:464
+msgid "Phone number"
+msgstr "Telefonsz�m"
+
+#: ../install_steps_interactive.pm_.c:465
+msgid "Login ID"
+msgstr "Felhaszn�l�i n�v"
+
+#: ../install_steps_interactive.pm_.c:466
+#: ../install_steps_interactive.pm_.c:578
+#: ../install_steps_interactive.pm_.c:624
+#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
+msgid "Password"
+msgstr "Jelsz�"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Authentication"
+msgstr "Autentik�ci�"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "PAP"
+msgstr "PAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Script-based"
+msgstr "Szkript-tel"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Terminal-based"
+msgstr "Termin�lon kereszt�l"
+
+#: ../install_steps_interactive.pm_.c:468
+msgid "Domain name"
+msgstr "Tartom�nyn�v"
+
+#: ../install_steps_interactive.pm_.c:469
+msgid "First DNS Server"
+msgstr "Els�dleges n�vkiszolg�l�"
+
+#: ../install_steps_interactive.pm_.c:470
+msgid "Second DNS Server"
+msgstr "M�sodlagos n�vkiszolg�l�"
+
+#: ../install_steps_interactive.pm_.c:483
+msgid "Bringing up the network"
+msgstr "H�l�zat ind�t�sa"
+
+#: ../install_steps_interactive.pm_.c:492
+msgid ""
+"You have now the possibility to download software aimed for encryption.\n"
+"\n"
+"WARNING:\n"
+"\n"
+"Due to different general requirements applicable to these software and "
+"imposed\n"
+"by various jurisdictions, customer and/or end user of theses software "
+"should\n"
+"ensure that the laws of his/their jurisdiction allow him/them to download, "
+"stock\n"
+"and/or use these software.\n"
+"\n"
+"In addition customer and/or end user shall particularly be aware to not "
+"infringe\n"
+"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
+"respect the provision of these applicable laws, he/they will incur serious\n"
+"sanctions.\n"
+"\n"
+"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
+"liable\n"
+"for special, indirect or incidental damages whatsoever (including, but not\n"
+"limited to loss of profits, business interruption, loss of commercial data "
+"and\n"
+"other pecuniary losses, and eventual liabilities and indemnification to be "
+"paid\n"
+"pursuant to a court decision) arising out of use, possession, or the sole\n"
+"downloading of these software, to which customer and/or end user could\n"
+"eventually have access after having sign up the present agreement.\n"
+"\n"
+"\n"
+"For any queries relating to these agreement, please contact \n"
+"Mandrakesoft, Inc.\n"
+"2400 N. Lincoln Avenue Suite 243\n"
+"Altadena California 91001\n"
+"USA"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:523
+msgid "Choose a mirror from which to get the packages"
+msgstr "V�lassz t�k�rkiszolg�l�t, ahonnan let�lt�d a csomagokat"
+
+#: ../install_steps_interactive.pm_.c:528
+msgid "Contacting the mirror to get the list of available packages"
+msgstr ""
+"Kapcsolatfelv�tel a t�k�rkiszolg�l�val, el�rhet� csomagok list�j�nak "
+"let�lt�se"
+
+#: ../install_steps_interactive.pm_.c:532
+msgid "Which packages do you want to install"
+msgstr "Mely csomagokat telep�tsem?"
+
+#: ../install_steps_interactive.pm_.c:534
+msgid "Downloading cryptographic packages"
+msgstr "A titkos�t� csomagok let�lt�se"
+
+#: ../install_steps_interactive.pm_.c:544
+msgid "Which is your timezone?"
+msgstr "Melyik id�z�n�ban vagy?"
+
+#: ../install_steps_interactive.pm_.c:545
+msgid "Is your hardware clock set to GMT?"
+msgstr "A hardver �r�d (BIOS) GMT id�t mutat?"
+
+#: ../install_steps_interactive.pm_.c:555
+msgid "Printer"
+msgstr "Nyomtat�"
+
+#: ../install_steps_interactive.pm_.c:556
+msgid "Would you like to configure a printer?"
+msgstr "Szeretn�l be�ll�tani egy nyomtat�t?"
+
+#: ../install_steps_interactive.pm_.c:576
+msgid "No password"
+msgstr "Nincs jelsz�"
+
+#: ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
+#: ../my_gtk.pm_.c:525
+msgid "Ok"
+msgstr "Ok"
+
+#: ../install_steps_interactive.pm_.c:579
+#: ../install_steps_interactive.pm_.c:625
+#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
+msgid "Password (again)"
+msgstr "Jelsz� (�jra)"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "Use shadow file"
+msgstr "\"Shadow\" f�jl alkalmaz�sa"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "shadow"
+msgstr "shadow"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "MD5"
+msgstr "MD5"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "Use MD5 passwords"
+msgstr "MD5 jelszavak alkalmaz�sa"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "Use NIS"
+msgstr "NIS haszn�lata"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "yellow pages"
+msgstr "yellow pages"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "Please try again"
+msgstr "Pr�b�lkozz �jra"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "The passwords do not match"
+msgstr "A jelszavak nem egyeznek"
+
+#: ../install_steps_interactive.pm_.c:590
+#, c-format
+msgid "This password is too simple (must be at least %d characters long)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:597
+msgid "Authentification NIS"
+msgstr "NIS azonos�t�s"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Domain"
+msgstr "NIS tartom�ny"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Server"
+msgstr "NIS szerver"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Accept user"
+msgstr "Felhaszn�l� felv�tele"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Add user"
+msgstr "Felhaszn�l� hozz�ad�sa"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid "(already added %s)"
+msgstr "(m�r hozz�adtam a %s -t)"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Adj meg egy felhaszn�l�t\n"
+"%s"
+
+#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
+msgid "Real name"
+msgstr "Igazi n�v"
+
+#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
+msgid "User name"
+msgstr "Felhaszn�l�n�v"
+
+#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
+msgid "Shell"
+msgstr "Shell"
+
+#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
+msgid "This password is too simple"
+msgstr "Ez a jelsz� t�l egyszer�"
+
+#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
+msgid "Please give a user name"
+msgstr "K�rlek �rj be egy felhaszn�l�nevet"
+
+#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"A felhaszn�l�n�v a k�vetkez�ket tartalmazhatja: kisbet�k, sz�mok, `-' �s `_'"
+
+#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
+msgid "This user name is already added"
+msgstr "M�r van ilyen felhaszn�l�n�v"
+
+#: ../install_steps_interactive.pm_.c:659
+#, fuzzy
+msgid "First drive"
+msgstr "Els�dleges n�vkiszolg�l�"
+
+#: ../install_steps_interactive.pm_.c:660
+#, fuzzy
+msgid "Second drive"
+msgstr "M�sodlagos n�vkiszolg�l�"
+
+#: ../install_steps_interactive.pm_.c:661
+msgid "Skip"
+msgstr "Kihagy"
+
+#: ../install_steps_interactive.pm_.c:666
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO on your system, or another operating system removes LILO, or LILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?"
+msgstr ""
+"A boot floppy lehet�v� teszi, hogy elind�tsd a Linux oper�ci�s rendszert\n"
+"a bootmanager n�lk�l. Ez akkor hasznos, ha nem akarsz LILO-t telep�teni a \n"
+"g�pre, egy m�sik oper�ci�s rendszer let�rli a LILO-t vagy a LILO nem\n"
+"m�k�dik az adott hardver konfigur�ci�ddal. A boot floppy-t haszn�lhatod \n"
+"a \"Mandrake rescue image\"-el egy�tt, �gy sokkal k�nnyebb kijav�tani a \n"
+"rendszer s�lyos be�ll�t�si hib�it. Szeretn�l most boot floppy-t l�trehozni?"
+
+#: ../install_steps_interactive.pm_.c:675
+msgid "Sorry, no floppy drive available"
+msgstr "Bocsi, nincs el�rhet� floppy drive"
+
+#: ../install_steps_interactive.pm_.c:678
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr ""
+"V�laszd ki azt a floppy meghajt�t, amelyiket haszn�lni akarod a bootdisk "
+"k�sz�t�s�hez"
+
+#: ../install_steps_interactive.pm_.c:683
+#, c-format
+msgid "Insert a floppy in drive %s"
+msgstr "Rakj egy floppy -t a(z) %s meghajt�ba"
+
+#: ../install_steps_interactive.pm_.c:684
+#: ../install_steps_interactive.pm_.c:1042
+msgid "Creating bootdisk"
+msgstr "Bootdisk k�sz�l"
+
+#: ../install_steps_interactive.pm_.c:691
+msgid "Preparing bootloader"
+msgstr "Bootloader el�k�sz�t�se"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of boot partition"
+msgstr "A boot part�ci� els� szektora"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of drive (MBR)"
+msgstr "A lemez els� szektora (MBR)"
+
+#: ../install_steps_interactive.pm_.c:708
+msgid "LILO Installation"
+msgstr "LILO telep�t�se"
+
+#: ../install_steps_interactive.pm_.c:709
+msgid "Where do you want to install the bootloader?"
+msgstr "Hova szeretn�d install�lni a bootloader -t?"
+
+#: ../install_steps_interactive.pm_.c:715
+msgid "Do you want to use LILO?"
+msgstr "Szeretn�d a LILO-t haszn�lni?"
+
+#: ../install_steps_interactive.pm_.c:718
+msgid "Boot device"
+msgstr "Boot eszk�z"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "Linear (needed for some SCSI drives)"
+msgstr "Linear (ez egyes SCSI merevlemezeknek kell)"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "linear"
+msgstr "linear"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "Compact"
+msgstr "Compact"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "compact"
+msgstr "compact"
+
+#: ../install_steps_interactive.pm_.c:721
+msgid "Delay before booting default image"
+msgstr "K�sleltet�s az alap�rtelmezett image bet�lt�se el�tt"
+
+#: ../install_steps_interactive.pm_.c:722
+msgid "Video mode"
+msgstr "Vide� m�d"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "Restrict command line options"
+msgstr "Parancssorban �tadhat� opci�k korl�toz�sa"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "restrict"
+msgstr "korl�tozott"
+
+#: ../install_steps_interactive.pm_.c:732
+msgid "LILO main options"
+msgstr "A LILO f�bb opci�i"
+
+#: ../install_steps_interactive.pm_.c:735
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"A ``Parancssorban �tadhat� opci�k korl�toz�sa'' be�ll�t�snak jelsz� n�lk�l\n"
+"nincs �rtelme"
+
+#: ../install_steps_interactive.pm_.c:746
+msgid ""
+"Here are the following entries in LILO.\n"
+"You can add some more or change the existing ones."
+msgstr ""
+"Itt vannak a LILO jelenlegi bejegyz�sei.\n"
+"Adhatsz a megl�v�kh�z �jakat, vagy m�dos�thatod a r�gieket."
+
+#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
+msgid "Add"
+msgstr "Hozz�ad"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Linux"
+msgstr "Linux"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Other OS (windows...)"
+msgstr "Egy�b op. rendszer (windows...)"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Which type of entry do you want to add"
+msgstr "Milyen bejegyz�st szeretn�l hozz�adni"
+
+#: ../install_steps_interactive.pm_.c:777
+msgid "Image"
+msgstr "Image"
+
+#: ../install_steps_interactive.pm_.c:778
+#: ../install_steps_interactive.pm_.c:786
+msgid "Root"
+msgstr "Root"
+
+#: ../install_steps_interactive.pm_.c:779
+msgid "Append"
+msgstr "Append"
+
+#: ../install_steps_interactive.pm_.c:780
+msgid "Initrd"
+msgstr "Initrd"
+
+#: ../install_steps_interactive.pm_.c:781
+msgid "Read-write"
+msgstr "�r�s-olvas�s (read-write)"
+
+#: ../install_steps_interactive.pm_.c:787
+msgid "Table"
+msgstr "T�bla (table)"
+
+#: ../install_steps_interactive.pm_.c:788
+msgid "Unsafe"
+msgstr "Nem biztonsagos (unsafe)"
+
+#: ../install_steps_interactive.pm_.c:793
+msgid "Label"
+msgstr "C�mke (label)"
+
+#: ../install_steps_interactive.pm_.c:795
+msgid "Default"
+msgstr "Alap�rtelmezett (default)"
+
+#: ../install_steps_interactive.pm_.c:798
+msgid "Remove entry"
+msgstr "Bejegyz�s elt�vol�t�sa"
+
+#: ../install_steps_interactive.pm_.c:801
+msgid "Empty label not allowed"
+msgstr "�res cimke nem enged�lyezett"
+
+#: ../install_steps_interactive.pm_.c:802
+msgid "This label is already in use"
+msgstr "M�r van ilyen cimke"
+
+#: ../install_steps_interactive.pm_.c:803
+#, c-format
+msgid "A entry %s already exists"
+msgstr "A %s bejegyz�s m�r l�tezik"
+
+#: ../install_steps_interactive.pm_.c:817
+msgid "Installation of LILO failed. The following error occured:"
+msgstr "A LILO telep�t�se nem siker�lt. A hiba a k�vetkez�:"
+
+#: ../install_steps_interactive.pm_.c:831
+msgid "Proxies configuration"
+msgstr "Proxy be�ll�t�sok"
+
+#: ../install_steps_interactive.pm_.c:832
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
+
+#: ../install_steps_interactive.pm_.c:833
+msgid "FTP proxy"
+msgstr "FTP proxy"
+
+#: ../install_steps_interactive.pm_.c:839
+msgid "Proxy should be http://..."
+msgstr "A proxy valami ilyen kell, hogy legyen: http://..."
+
+#: ../install_steps_interactive.pm_.c:840
+msgid "Proxy should be ftp://..."
+msgstr "A proxy valami ilyen kell, hogy legyen: ftp://..."
+
+#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
+msgid "Welcome To Crackers"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
+msgid "Poor"
+msgstr "Gyenge"
+
+#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
+msgid "Low"
+msgstr "Alacsony"
+
+#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
+msgid "Medium"
+msgstr "K�zepes"
+
+#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
+msgid "High"
+msgstr "Magas"
+
+#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
+msgid "Paranoid"
+msgstr "Paranoi�s vagy..."
+
+#: ../install_steps_interactive.pm_.c:868
+msgid "Miscellaneous questions"
+msgstr "Egy�b k�rd�sek"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "(may cause data corruption)"
+msgstr "(adatveszt�st okozhat)"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "Use hard drive optimisations?"
+msgstr "Haszn�ljak merevlemez optimaliz�l�st?"
+
+#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
+msgid "Choose security level"
+msgstr "V�laszd ki a biztons�gi szintet"
+
+#: ../install_steps_interactive.pm_.c:871
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Fizikai RAM m�rete (jelenleg %d MB)"
+
+#: ../install_steps_interactive.pm_.c:872
+msgid "Removable media automounting"
+msgstr "Elt�vol�that� m�dia, automatikus mountol�s"
+
+#: ../install_steps_interactive.pm_.c:874
+msgid "Enable num lock at startup"
+msgstr "Num Lock bekapcsol�sa bootol�skor"
+
+#: ../install_steps_interactive.pm_.c:877
+msgid "Give the ram size in Mb"
+msgstr "Add meg a fizikai mem�ria m�ret�t Mb-ban"
+
+#: ../install_steps_interactive.pm_.c:905
+#: ../install_steps_interactive.pm_.c:1075
+msgid "Try to find PCI devices?"
+msgstr "PCI eszk�z�k keres�se?"
+
+#: ../install_steps_interactive.pm_.c:920
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"A telep�t�s nem teljes, egyes l�p�sek kimaradtak.\n"
+"\n"
+"Biztos hogy ki akarsz l�pni?"
+
+#: ../install_steps_interactive.pm_.c:927
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"For information on fixes which are available for this release of "
+"Linux-Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux-Mandrake User's Guide."
+msgstr ""
+"Gratul�lok, a telep�t�s sikeresen befejez�d�tt. Vedd ki a m�di�t, amir�l\n"
+"bootolt�l (CD, floppy lemez), �s nyomj ENTER-t a rendszer �jraind�t�s�hoz.\n"
+"\n"
+"Az ehhez a Linux-Mandrake verzi�hoz el�rhet� jav�t�sokat let�lthetsz a \n"
+"http://www.linux-mandrake.com/ -r�l.\n"
+"\n"
+"Tov�bbi inform�ci�kat a rendszer be�ll�t�s�hoz a Hivatalos \n"
+"Linux-Mandrake Felhaszn�l�i K�zik�nyvben tal�lsz."
+
+#: ../install_steps_interactive.pm_.c:936
+msgid "Shutting down"
+msgstr "Rendszer le�ll�t�sa"
+
+#: ../install_steps_interactive.pm_.c:950
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr "Driver telep�t�se a(z) %s k�rty�hoz (%s)"
+
+#: ../install_steps_interactive.pm_.c:951
+#, c-format
+msgid "(module %s)"
+msgstr "(%s modul)"
+
+#: ../install_steps_interactive.pm_.c:961
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "Melyik %s drivert pr�b�ljam meg?"
+
+#: ../install_steps_interactive.pm_.c:969
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+"Egyes esetekben a %s drivernek tov�bbi param�terekre van sz�ks�ge a helyes\n"
+"m�k�d�shez, b�r ez nem jellemz�. Szeretn�l tov�bbi param�tereket megadni a\n"
+"drivernek, vagy hagyod, hogy az mag�t�l k�rdezze le a hardvert�l a "
+"sz�ks�ges\n"
+"inform�ci�t? Esetenk�nt az automatikus keres�s lefagyaszthatja a \n"
+"sz�m�t�g�pet, de ez semmilyen k�rosod�ssal nem j�r."
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Autoprobe"
+msgstr "Automatikus keres�s"
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Specify options"
+msgstr "R�szletes be�ll�t�sok"
+
+#: ../install_steps_interactive.pm_.c:978
+#, c-format
+msgid "You may now provide its options to module %s."
+msgstr "Most adhatod meg a %s modul param�tereit."
+
+#: ../install_steps_interactive.pm_.c:984
+#, c-format
+msgid ""
+"You may now provide its options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"�tadhatsz a %s modulnak param�tereket.\n"
+"A param�terek szintaktik�ja: ``n�v=�rt�k n�v2=�rt�k2 ...''.\n"
+"P�ld�ul: ``io=0x300 irq=7''"
+
+#: ../install_steps_interactive.pm_.c:987
+msgid "Module options:"
+msgstr "Modul be�ll�t�sok:"
+
+#: ../install_steps_interactive.pm_.c:997
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"%s modul bet�lt�se sikertelen.\n"
+"Megpr�b�lod m�s param�terekkel?"
+
+#: ../install_steps_interactive.pm_.c:1010
+msgid "Try to find PCMCIA cards?"
+msgstr "Pr�b�ljam megkeresni a PCMCIA k�rty�kat?"
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA k�rty�k be�ll�t�sa..."
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../install_steps_interactive.pm_.c:1018
+msgid ""
+"Linux does not yet fully support ultra dma 66 HPT.\n"
+"As a work-around i can make a custom floppy giving access the hard drive on "
+"ide2 and ide3"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1039
+#, fuzzy
+msgid ""
+"Enter a floppy to create an HTP enabled boot\n"
+"(all data on floppy will be lost)"
+msgstr ""
+"Helyezz be egy lemezt a meghajt�ba\n"
+"A lemezen minden adat elv�sz"
+
+#: ../install_steps_interactive.pm_.c:1056
+msgid "It is necessary to restart installation booting on the floppy"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1057
+msgid "It is necessary to restart installation with the new parameters"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1061
+#, c-format
+msgid ""
+"Failed to create an HTP boot floppy.\n"
+"You may have to restart installation and give ``%s'' at the prompt"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1081
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr "Tal�ltam: %s %s csatol�t"
+
+#: ../install_steps_interactive.pm_.c:1082
+msgid "Do you have another one?"
+msgstr "Van m�sik is?"
+
+#: ../install_steps_interactive.pm_.c:1083
+#, c-format
+msgid "Do you have any %s interface?"
+msgstr "Van valamilyen %s csatol�d?"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
+msgid "No"
+msgstr "Nem"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424
+msgid "Yes"
+msgstr "Igen"
+
+#: ../install_steps_interactive.pm_.c:1086
+msgid "See hardware info"
+msgstr "N�zd meg a hardver inf�t"
+
+#: ../install_steps_newt.pm_.c:19
+#, c-format
+msgid "Linux-Mandrake Installation %s"
+msgstr "Linux-Mandrake Telep�t�s %s"
+
+#: ../install_steps_newt.pm_.c:30
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr ""
+" <Tab>/<Alt-Tab> elemek k�z�tt | <Space> kiv�laszt | <F12> k�vetkez� k�perny�"
+
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
+msgid "Cancel"
+msgstr "M�gse"
+
+#: ../interactive.pm_.c:181
+msgid "Please wait"
+msgstr "K�rlek v�rj"
+
+#: ../interactive_stdio.pm_.c:35
+#, c-format
+msgid "Ambiguity (%s), be more precise\n"
+msgstr "F�lre�rthet� (%s), l�gy prec�zebb\n"
+
+#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
+#: ../interactive_stdio.pm_.c:70
+msgid "Bad choice, try again\n"
+msgstr "Rossz v�laszt�s, pr�b�lkozz �jra\n"
+
+#: ../interactive_stdio.pm_.c:39
+#, c-format
+msgid " ? (default %s) "
+msgstr " ? (alap�rtelmezett: %s) "
+
+#: ../interactive_stdio.pm_.c:52
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Mit v�lasztasz? (alap�rtelmezett: %s)"
+
+#: ../interactive_stdio.pm_.c:71
+#, c-format
+msgid "Your choice? (default %s enter `none' for none) "
+msgstr "Mit v�lasztasz? (alap�rtelmezett: %s, �rd `none' a semmihez)"
+
+#: ../keyboard.pm_.c:88
+msgid "Armenian"
+msgstr "�rm�ny"
+
+#: ../keyboard.pm_.c:89
+msgid "Belgian"
+msgstr "Belga"
+
+#: ../keyboard.pm_.c:90
+msgid "Bulgarian"
+msgstr "Bolg�r"
+
+#: ../keyboard.pm_.c:91
+msgid "Brazilian"
+msgstr "Brazil"
+
+#: ../keyboard.pm_.c:92
+msgid "Swiss (French layout)"
+msgstr "Sv�jci (francia kioszt�s)"
+
+#: ../keyboard.pm_.c:93
+msgid "Swiss (German layout)"
+msgstr "Sv�jci (n�met kioszt�s)"
+
+#: ../keyboard.pm_.c:94
+msgid "Czech"
+msgstr "Cseh"
+
+#: ../keyboard.pm_.c:95
+msgid "German"
+msgstr "N�met"
+
+#: ../keyboard.pm_.c:96
+msgid "Danish"
+msgstr "D�n"
+
+#: ../keyboard.pm_.c:97
+msgid "Dvorak"
+msgstr "Dvorak"
+
+#: ../keyboard.pm_.c:98
+msgid "Estonian"
+msgstr "�szt"
+
+#: ../keyboard.pm_.c:99
+msgid "Spanish"
+msgstr "Spanyol"
+
+#: ../keyboard.pm_.c:100
+msgid "Finnish"
+msgstr "Finn"
+
+#: ../keyboard.pm_.c:101
+msgid "French"
+msgstr "Francia"
+
+#: ../keyboard.pm_.c:102
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gr�z (\"Orosz\" kioszt�s)"
+
+#: ../keyboard.pm_.c:103
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gr�z (\"Latin\" kioszt�s)"
+
+#: ../keyboard.pm_.c:104
+msgid "Greek"
+msgstr "G�r�g"
+
+#: ../keyboard.pm_.c:105
+msgid "Hungarian"
+msgstr "Magyar"
+
+#: ../keyboard.pm_.c:106
+msgid "Israeli"
+msgstr "Izraeli"
+
+#: ../keyboard.pm_.c:107
+msgid "Israeli (Phonetic)"
+msgstr "Izraeli (Fonetikus)"
+
+#: ../keyboard.pm_.c:108
+msgid "Icelandic"
+msgstr "Izlandi"
+
+#: ../keyboard.pm_.c:109
+msgid "Italian"
+msgstr "Olasz"
+
+#: ../keyboard.pm_.c:110
+msgid "Latin American"
+msgstr "Latin-amerikai"
+
+#: ../keyboard.pm_.c:111
+msgid "Dutch"
+msgstr "Holland"
+
+#: ../keyboard.pm_.c:112
+msgid "Lithuanian AZERTY"
+msgstr "Litv�n AZERTY"
+
+#: ../keyboard.pm_.c:113
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litv�n \"sz�msor\" QWERTY"
+
+#: ../keyboard.pm_.c:114
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litv�n \"fonetikus\" QWERTY"
+
+#: ../keyboard.pm_.c:115
+msgid "Norwegian"
+msgstr "Norv�g"
+
+#: ../keyboard.pm_.c:116
+#, fuzzy
+msgid "Polish (qwerty layout)"
+msgstr "Sv�jci (n�met kioszt�s)"
+
+#: ../keyboard.pm_.c:117
+#, fuzzy
+msgid "Polish (qwertz layout)"
+msgstr "Sv�jci (n�met kioszt�s)"
+
+#: ../keyboard.pm_.c:118
+msgid "Portuguese"
+msgstr "Portug�l"
+
+#: ../keyboard.pm_.c:119
+msgid "Canadian (Quebec)"
+msgstr "Kanadai (Quebec)"
+
+#: ../keyboard.pm_.c:120
+msgid "Russian"
+msgstr "Orosz"
+
+#: ../keyboard.pm_.c:121
+msgid "Russian (Yawerty)"
+msgstr "Orosz (Yawerty)"
+
+#: ../keyboard.pm_.c:122
+msgid "Swedish"
+msgstr "Sv�d"
+
+#: ../keyboard.pm_.c:123
+msgid "Slovenian"
+msgstr "Szlov�n"
+
+#: ../keyboard.pm_.c:124
+msgid "Slovakian"
+msgstr "Szlov�k"
+
+#: ../keyboard.pm_.c:125
+msgid "Thai keyboard"
+msgstr "Thai billenty�zet"
+
+#: ../keyboard.pm_.c:126
+msgid "Turkish (traditional \"F\" model)"
+msgstr "T�r�k (nemzeti \"F\" model)"
+
+#: ../keyboard.pm_.c:127
+msgid "Turkish (modern \"Q\" model)"
+msgstr "T�r�k (modern \"Q\" model)"
+
+#: ../keyboard.pm_.c:128
+msgid "Ukrainian"
+msgstr "Ukr�n"
+
+#: ../keyboard.pm_.c:129
+msgid "UK keyboard"
+msgstr "Angol billenty�zet"
+
+#: ../keyboard.pm_.c:130
+msgid "US keyboard"
+msgstr "Amerikai billenty�zet"
+
+#: ../keyboard.pm_.c:131
+msgid "US keyboard (international)"
+msgstr "Amerikai nemzetk�zi billenty�zet"
+
+#: ../keyboard.pm_.c:132
+msgid "Yugoslavian (latin layout)"
+msgstr "Jugoszl�v (latin kioszt�s)"
+
+# NOTE: this message will be displayed by lilo at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# '\202' is '�' (eacute) in cp437 encoding
+# '\242' is '�' (oacute) in cp437 encoding
+# '\224' is '�' (odiaeresis) in cp437 encoding.
+# '\201' is '�' (udiaeresis) in cp437 encoding
+# '\240' is '�' (aacute) in cp437 encoding
+# '\241' is '�' (iacute) in cp437 encoding
+# there is no '�' (odoubleacute) in cp437 using o" ...
+#
+#: ../lilo.pm_.c:145
+#, c-format
+msgid ""
+"Welcome to LILO the operating system chooser!\n"
+"\n"
+"To list the possible choices, press <TAB>.\n"
+"\n"
+"To load one of them, write its name and press <ENTER> or wait %d seconds for "
+"default boot.\n"
+"\n"
+msgstr ""
+"L�gy �dv�z�lve a LILO bootmanager-ben!\n"
+"\n"
+"A lehets�ges alternat�v�k megtekint�s�hez nyomj egy <TAB>-ot.\n"
+"\n"
+"Egy adott oper�ci�s rendszer bet�lt�s�hez �rd be a megfelelo\" image nev�t "
+"�s\n"
+"nyomj egy <ENTER>-t, vagy v�rj %d m�sodpercet �s az alap�rtelmezett "
+"elindul.\n"
+"\n"
+
+#: ../mouse.pm_.c:20
+msgid "No Mouse"
+msgstr "Nincs eg�r"
+
+#: ../mouse.pm_.c:21
+msgid "Microsoft Rev 2.1A or higher (serial)"
+msgstr "Microsoft Rev 2.1A vagy magasabb (soros)"
+
+#: ../mouse.pm_.c:22
+msgid "Logitech CC Series (serial)"
+msgstr "Logitech CC sorozat (soros)"
+
+#: ../mouse.pm_.c:23
+msgid "Logitech MouseMan+/FirstMouse+ (serial)"
+msgstr "Logitech MouseMan+/FirstMouse+ (soros)"
+
+#: ../mouse.pm_.c:24
+msgid "ASCII MieMouse (serial)"
+msgstr "ASCII MieMouse (soros)"
+
+#: ../mouse.pm_.c:25
+msgid "Genius NetMouse (serial)"
+msgstr "Genius NetMouse (soros)"
+
+#: ../mouse.pm_.c:26
+msgid "Microsoft IntelliMouse (serial)"
+msgstr "Microsoft IntelliMouse (soros)"
+
+#: ../mouse.pm_.c:27
+msgid "MM Series (serial)"
+msgstr "MM Series (soros)"
+
+#: ../mouse.pm_.c:28
+msgid "MM HitTablet (serial)"
+msgstr "MM HitTablet (soros)"
+
+#: ../mouse.pm_.c:29
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (soros, r�gi C7 t�pus)"
+
+#: ../mouse.pm_.c:30
+msgid "Logitech MouseMan/FirstMouse (serial)"
+msgstr "Logitech MouseMan/FirstMouse (soros)"
+
+#: ../mouse.pm_.c:31
+msgid "Generic Mouse (serial)"
+msgstr "�ltal�nos eg�r (soros)"
+
+#: ../mouse.pm_.c:32
+msgid "Microsoft compatible (serial)"
+msgstr "Microsoft kompatibilis (soros)"
+
+#: ../mouse.pm_.c:33
+msgid "Generic 3 Button Mouse (serial)"
+msgstr "�ltal�nos 3 gombos eg�r (soros)"
+
+#: ../mouse.pm_.c:34
+msgid "Mouse Systems (serial)"
+msgstr "Mouse Systems (soros)"
+
+#: ../mouse.pm_.c:35
+msgid "Generic Mouse (PS/2)"
+msgstr "�ltal�nos eg�r (PS/2)"
+
+#: ../mouse.pm_.c:36
+msgid "Logitech MouseMan/FirstMouse (ps/2)"
+msgstr "Logitech MouseMan/FirstMouse (ps/2)"
+
+#: ../mouse.pm_.c:37
+msgid "Generic 3 Button Mouse (PS/2)"
+msgstr "�ltal�nos 3 gombos eg�r (PS/2)"
+
+#: ../mouse.pm_.c:38
+msgid "ALPS GlidePoint (PS/2)"
+msgstr "ALPS GlidePoint (PS/2)"
+
+#: ../mouse.pm_.c:39
+msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
+msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)"
+
+#: ../mouse.pm_.c:40
+msgid "Kensington Thinking Mouse (PS/2)"
+msgstr "Kensington Thinking Mouse (PS/2)"
+
+#: ../mouse.pm_.c:41
+msgid "ASCII MieMouse (PS/2)"
+msgstr "ASCII MieMouse (PS/2)"
+
+#: ../mouse.pm_.c:42
+msgid "Genius NetMouse (PS/2)"
+msgstr "Genius NetMouse (PS/2)"
+
+#: ../mouse.pm_.c:43
+msgid "Genius NetMouse Pro (PS/2)"
+msgstr "Genius NetMouse Pro (PS/2)"
+
+#: ../mouse.pm_.c:44
+msgid "Genius NetScroll (PS/2)"
+msgstr "Genius NetScroll (PS/2)"
+
+#: ../mouse.pm_.c:45
+msgid "Microsoft IntelliMouse (PS/2)"
+msgstr "Microsoft IntelliMouse (PS/2)"
+
+#: ../mouse.pm_.c:46
+msgid "ATI Bus Mouse"
+msgstr "ATI Bus eg�r"
+
+#: ../mouse.pm_.c:47
+msgid "Microsoft Bus Mouse"
+msgstr "Microsoft Bus eg�r"
+
+#: ../mouse.pm_.c:48
+msgid "Logitech Bus Mouse"
+msgstr "Logitech Bus eg�r"
+
+#: ../mouse.pm_.c:49
+msgid "USB Mouse"
+msgstr "USB eg�r"
+
+#: ../mouse.pm_.c:50
+msgid "USB Mouse (3 buttons or more)"
+msgstr "USB eg�r (3 vagy t�bb gomb)"
+
+#: ../partition_table.pm_.c:486
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+"A part�ci�s t�bl�ban van egy �res hely, de nem tudom haszn�lni.\n"
+"Az egyetlen megold�s, az els�dleges part�ci� �thelyez�se �gy, hogy a\n"
+"kiterjesztett part�ci�k mell� ker�lj�n az �res hely."
+
+#: ../partition_table.pm_.c:572
+#, c-format
+msgid "Error reading file %s"
+msgstr "Hiba a %s f�jl olvas�sa k�zben"
+
+#: ../partition_table.pm_.c:579
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "A %s f�jlb�l val� vissza�ll�t�s sikertelen: %s"
+
+#: ../partition_table.pm_.c:581
+msgid "Bad backup file"
+msgstr "Hib�s ment�s"
+
+#: ../partition_table.pm_.c:602
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Hiba a %s f�jl �r�sa k�zben"
+
+#: ../placeholder.pm_.c:5
+#, fuzzy
+msgid "Show less"
+msgstr "Mindent mutat"
+
+#: ../placeholder.pm_.c:6
+msgid "Show more"
+msgstr ""
+
+#: ../printer.pm_.c:244
+msgid "Local printer"
+msgstr "Helyi nyomtat�"
+
+#: ../printer.pm_.c:245
+msgid "Remote lpd"
+msgstr "T�voli lpd"
+
+#: ../printer.pm_.c:246
+msgid "SMB/Windows 95/98/NT"
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../printer.pm_.c:247
+msgid "NetWare"
+msgstr "NetWare"
+
+#: ../printerdrake.pm_.c:75
+msgid "Local Printer Options"
+msgstr "Helyi nyomtat� be�ll�t�sai"
+
+#: ../printerdrake.pm_.c:76
+msgid ""
+"Every print queue (which print jobs are directed to) needs a\n"
+"name (often lp) and a spool directory associated with it. What\n"
+"name and directory should be used for this queue?"
+msgstr ""
+"Minden nyomtat�sornak (itt �llnak sorban a nyomtat�sok) kell adni egy nevet\n"
+"(ami gyakran lp) �s kell rendelni hozz� egy spool k�nyvt�rat. Milyen sor- "
+"�s\n"
+"k�nyvt�rnevet �ll�tsak be ehhez a nyomtat�sorhoz?"
+
+#: ../printerdrake.pm_.c:79
+msgid "Name of queue:"
+msgstr "Nyomtat�sor neve:"
+
+#: ../printerdrake.pm_.c:79
+msgid "Spool directory:"
+msgstr "Spool k�nyvt�r:"
+
+#: ../printerdrake.pm_.c:90
+msgid "Select Printer Connection"
+msgstr "V�lassz nyomtat� kapcsolatot"
+
+#: ../printerdrake.pm_.c:91
+msgid "How is the printer connected?"
+msgstr "Hogyan van a nyomtat� csatlakoztatva?"
+
+#: ../printerdrake.pm_.c:99
+msgid "Detecting devices..."
+msgstr "Eszk�z�k keres�se..."
+
+#: ../printerdrake.pm_.c:99
+msgid "Test ports"
+msgstr "Portok tesztel�se"
+
+#: ../printerdrake.pm_.c:112
+#, c-format
+msgid "A printer, model \"%s\", has been detected on "
+msgstr "%s t�pus� nyomtat�t tal�ltam itt"
+
+#: ../printerdrake.pm_.c:119
+msgid "Local Printer Device"
+msgstr "Helyi nyomtat� eszk�z"
+
+#: ../printerdrake.pm_.c:120
+msgid ""
+"What device is your printer connected to \n"
+"(note that /dev/lp0 is equivalent to LPT1:)?\n"
+msgstr ""
+"Melyik eszk�zre van a nyomtat�d csatlakoztatva\n"
+"(megjegyz�s: /dev/lp0 egy�rtelm�en az LPT1:) ?\n"
+
+#: ../printerdrake.pm_.c:121
+msgid "Printer Device:"
+msgstr "Nyomtat� eszk�z:"
+
+#: ../printerdrake.pm_.c:125
+msgid "Remote lpd Printer Options"
+msgstr "T�voli nyomtat� d�mon be�ll�t�sai"
+
+#: ../printerdrake.pm_.c:126
+msgid ""
+"To use a remote lpd print queue, you need to supply\n"
+"the hostname of the printer server and the queue name\n"
+"on that server which jobs should be placed in."
+msgstr ""
+"T�voli lpd nyomtat�sor haszn�lat�hoz meg kell adnod a t�voli \n"
+"nyomtat�-kiszolg�l� nev�t, valamint annak a nyomtat�sornak a nev�t\n"
+"amelyikre a nyomtat�sokat k�ldeni szeretn�d."
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote hostname:"
+msgstr "T�voli host n�v:"
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote queue"
+msgstr "T�voli nyomtat�sor neve"
+
+#: ../printerdrake.pm_.c:134
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) nyomtat�si be�ll�t�sok"
+
+#: ../printerdrake.pm_.c:135
+msgid ""
+"To print to a SMB printer, you need to provide the\n"
+"SMB host name (Note! It may be different from its\n"
+"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
+"well as the share name for the printer you wish to access and any\n"
+"applicable user name, password, and workgroup information."
+msgstr ""
+"Ahhoz, hogy SMB nyomtat�ra tudj nyomtatni, meg kell adnod a nyomtat�-\n"
+"kiszolg�l� SMB nev�t (Megjegyz�s: nem biztos, hogy ugyanaz, mint a TCP/IP\n"
+"g�pn�v!) �s az IP c�m�t, valamint a megosztott nyomtat� nev�t �s a "
+"megfelel�\n"
+"jogosults�gokkal rendelkez� felhaszn�l� nev�t, munkacsoportj�t �s jelszav�t."
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server IP:"
+msgstr "SMB szerver IP:"
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server host:"
+msgstr "SMB szerver host (n�v):"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "Password:"
+msgstr "Jelsz�:"
+
+#: ../printerdrake.pm_.c:141
+msgid "Share name:"
+msgstr "Megoszt�s n�v:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "User name:"
+msgstr "Felhaszn�l� n�v:"
+
+#: ../printerdrake.pm_.c:142
+msgid "Workgroup:"
+msgstr "Munkacsoport:"
+
+#: ../printerdrake.pm_.c:157
+msgid "NetWare Printer Options"
+msgstr "NetWare nyomtat� be�ll�t�sai"
+
+#: ../printerdrake.pm_.c:158
+msgid ""
+"To print to a NetWare printer, you need to provide the\n"
+"NetWare print server name (Note! it may be different from its\n"
+"TCP/IP hostname!) as well as the print queue name for the printer you\n"
+"wish to access and any applicable user name and password."
+msgstr ""
+"Ahhoz, hogy Netware nyomtat�ra tudj nyomtatni, meg kell adnod a Netware\n"
+"nyomtat�-kiszolg�l� nev�t (Vigy�zz! Ez nem biztos, hogy megegyezik a TCP/IP\n"
+"g�pn�vvel!) �s a nyomtat�sor nev�t, valamint egy, a megfelel� "
+"jogosults�gokkal \n"
+"rendelkez� felhaszn�l�i nevet �s jelsz�t."
+
+#: ../printerdrake.pm_.c:162
+msgid "Print Queue Name:"
+msgstr "Nyomtat�si sor neve:"
+
+#: ../printerdrake.pm_.c:162
+msgid "Printer Server:"
+msgstr "Nyomtat� szerver:"
+
+#: ../printerdrake.pm_.c:173
+msgid "Yes, print ASCII test page"
+msgstr "Igen, nyomtass ASCII pr�ba oldalt"
+
+#: ../printerdrake.pm_.c:174
+msgid "Yes, print PostScript test page"
+msgstr "Igen, nyomtass PostScript pr�ba oldalt"
+
+#: ../printerdrake.pm_.c:175
+msgid "Yes, print both test pages"
+msgstr "Igen, nyomtasd ki mind a k�t pr�ba oldalt"
+
+#: ../printerdrake.pm_.c:183
+msgid "Configure Printer"
+msgstr "Nyomtat� be�ll�t�sa"
+
+#: ../printerdrake.pm_.c:184
+msgid "What type of printer do you have?"
+msgstr "Milyen t�pus� nyomtat�d van?"
+
+#: ../printerdrake.pm_.c:204
+msgid "Printer options"
+msgstr "Nyomtat� be�ll�t�sok"
+
+#: ../printerdrake.pm_.c:205
+msgid "Paper Size"
+msgstr "Pap�r m�ret"
+
+#: ../printerdrake.pm_.c:206
+msgid "Eject page after job?"
+msgstr "Lapdob�s nyomtat�s ut�n?"
+
+#: ../printerdrake.pm_.c:209
+msgid "Fix stair-stepping text?"
+msgstr "Jav�tsam a l�pcs�zetes sz�veget?"
+
+#: ../printerdrake.pm_.c:212
+msgid "Uniprint driver options"
+msgstr "Uniprint driver be�ll�t�sai"
+
+#: ../printerdrake.pm_.c:213
+msgid "Color depth options"
+msgstr "Sz�nm�lys�g be�ll�t�sai"
+
+#: ../printerdrake.pm_.c:223
+msgid "Do you want to test printing?"
+msgstr "Ki akarod pr�b�lni a nyomtat�st?"
+
+#: ../printerdrake.pm_.c:234
+msgid "Printing test page(s)..."
+msgstr "Teszt oldal(ak) kinyomtat�sa..."
+
+#: ../printerdrake.pm_.c:252
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+"Does it work properly?"
+msgstr ""
+"A teszt oldalt/oldalakat elk�ldtem a nyomtat� d�monnak.\n"
+"Eltarthat egy kis ideig, am�g a nyomt�s elindul.\n"
+"Nyomtat�si �llapot:\n"
+"%s\n"
+"\n"
+"M�k�dik?"
+
+#: ../printerdrake.pm_.c:256
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Does it work properly?"
+msgstr ""
+"A teszt oldalt/oldalakat elk�ldtem a nyomtat� d�monnak.\n"
+"Eltarthat egy kis ideig, am�g a nyomt�s elindul.\n"
+"M�k�dik?"
+
+#: ../raid.pm_.c:36
+#, c-format
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Nem tudok part�ci�t hozz�adni a _form�zott_ RAID md%d-hez"
+
+#: ../raid.pm_.c:106
+msgid "Can't write file $file"
+msgstr "Nem tudom �rni a $file f�jlt"
+
+#: ../raid.pm_.c:146
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nincs el�g part�ci� a RAID level %d -hez/-hoz/-h�z\n"
+
+#: ../standalone/draksec_.c:28
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive: it must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+
+#: ../standalone/draksec_.c:31
+msgid ""
+"Password are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+
+#: ../standalone/draksec_.c:32
+msgid ""
+"Few improvements for this security level, the main one is that there are\n"
+"more security warnings and checks."
+msgstr ""
+
+#: ../standalone/draksec_.c:34
+msgid ""
+"This is the standard security recommended for a computer that will be used\n"
+"to connect to the Internet as a client. There are now security checks. "
+msgstr ""
+
+#: ../standalone/draksec_.c:36
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which accept\n"
+"connections from many clients. "
+msgstr ""
+
+#: ../standalone/draksec_.c:39
+msgid ""
+"We take level 4 features, but now the system is entirely closed.\n"
+"Security features are at their maximum."
+msgstr ""
+
+#: ../standalone/draksec_.c:49
+msgid "Setting security level"
+msgstr "Biztons�gi szint be�ll�t�sa"
+
+#: ../standalone/drakxconf_.c:21
+msgid "Choose the tool you want to use"
+msgstr "V�laszd ki az eszk�zt, amit haszn�lni szeretn�l"
+
+#: ../standalone/drakxservices_.c:21
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"V�laszd ki, hogy bootol�skor milyen szolg�ltat�sok induljanak automatikusan"
+
+#: ../standalone/mousedrake_.c:30
+msgid "no serial_usb found\n"
+msgstr "nem tal�ltam serial_usb -t\n"
+
+#: ../standalone/mousedrake_.c:35
+msgid "Emulate third button?"
+msgstr "Emul�ljam a harmadik gombot?"
+
+#: ../standalone/rpmdrake_.c:25
+#, fuzzy
+msgid "reading configuration"
+msgstr "Be�ll�t�sok tesztel�se"
+
+#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
+#: ../standalone/rpmdrake_.c:253
+msgid "File"
+msgstr "F�jl"
+
+#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
+#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
+msgid "Search"
+msgstr "Keres�s"
+
+#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
+msgid "Package"
+msgstr "Csomag"
+
+#: ../standalone/rpmdrake_.c:51
+#, fuzzy
+msgid "Text"
+msgstr "halad�"
+
+#: ../standalone/rpmdrake_.c:53
+#, fuzzy
+msgid "Tree"
+msgstr "G�r�g"
+
+#: ../standalone/rpmdrake_.c:54
+msgid "Sort by"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:55
+msgid "Category"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:58
+#, fuzzy
+msgid "See"
+msgstr "Szerver"
+
+#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Installed packages"
+msgstr "csomagok telep�t�se"
+
+#: ../standalone/rpmdrake_.c:60
+#, fuzzy
+msgid "Available packages"
+msgstr "csomagok telep�t�se"
+
+#: ../standalone/rpmdrake_.c:62
+#, fuzzy
+msgid "Show only leaves"
+msgstr "Mindent mutat"
+
+#: ../standalone/rpmdrake_.c:67
+msgid "Expand all"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:68
+#, fuzzy
+msgid "Collapse all"
+msgstr "Mindet t�rli"
+
+#: ../standalone/rpmdrake_.c:70
+#, fuzzy
+msgid "Configuration"
+msgstr "Be�ll�t�sok tesztel�se"
+
+#: ../standalone/rpmdrake_.c:71
+#, fuzzy
+msgid "Add location of packages"
+msgstr "Csomagok �thelyez�s�t engedd"
+
+#: ../standalone/rpmdrake_.c:75
+#, fuzzy
+msgid "Update location"
+msgstr "Friss�t�si opci�k"
+
+#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
+#, fuzzy
+msgid "Remove"
+msgstr "Bejegyz�s elt�vol�t�sa"
+
+#: ../standalone/rpmdrake_.c:100
+msgid "Configuration: Add Location"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:101
+msgid "Expand Tree"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:102
+msgid "Collapse Tree"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:103
+#, fuzzy
+msgid "Find Package"
+msgstr "Csomagok keres�se"
+
+#: ../standalone/rpmdrake_.c:104
+#, fuzzy
+msgid "Find Package containing file"
+msgstr "Csomagok keres�se, melyek"
+
+#: ../standalone/rpmdrake_.c:105
+msgid "Toggle between Installed and Available"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:139
+#, fuzzy
+msgid "Files:\n"
+msgstr "F�jl"
+
+#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
+msgid "Uninstall"
+msgstr "Letelep�t�s"
+
+#: ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Choose package to install"
+msgstr "Csomagok kiv�laszt�sa"
+
+#: ../standalone/rpmdrake_.c:190
+#, fuzzy
+msgid "Checking dependencies"
+msgstr "Al��r�sok ellen�rz�se"
+
+#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
+msgid "Wait"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:209
+#, fuzzy
+msgid "The following packages are going to be uninstalled"
+msgstr "%d csomagok nem t�r�lhet�k"
+
+#: ../standalone/rpmdrake_.c:210
+#, fuzzy
+msgid "Uninstalling the RPMs"
+msgstr "%s csomag telep�t�se"
+
+#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
+msgid "Regexp"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:229
+msgid "Which package are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+#, c-format
+msgid "%s not found"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No more match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:246
+msgid ""
+"rpmdrake is currently in ``low memory'' mode.\n"
+"I'm going to relaunch rpmdrake to allow searching files"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:253
+msgid "Which file are you looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:269
+msgid "What are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:289
+msgid "Give a name (eg: `extra', `commercial')"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:291
+#, fuzzy
+msgid "Directory"
+msgstr "Szektor"
+
+#: ../standalone/rpmdrake_.c:294
+msgid "No cdrom available (nothing in /mnt/cdrom)"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:298
+msgid "URL of the directory containing the RPMs"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:299
+msgid ""
+"For FTP and HTTP, you need to give the location for hdlist\n"
+"It must be relative to the URL above"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:302
+msgid "Please submit the following information"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:304
+#, fuzzy, c-format
+msgid "%s is already in use"
+msgstr "M�r van ilyen cimke"
+
+#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
+#: ../standalone/rpmdrake_.c:329
+msgid "Updating the RPMs base"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:328
+#, fuzzy, c-format
+msgid "Going to remove entry %s"
+msgstr "Bejegyz�s elt�vol�t�sa"
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves takes some time"
+msgstr ""
+
+#~ msgid "Polish"
+#~ msgstr "Lengyel"
+
+#~ msgid "Going to install %d MB. You can choose to install more programs"
+#~ msgstr "%d MB-ot fogok telep�teni. Telep�thetsz m�g m�s programokat is"