diff options
Diffstat (limited to 'perl-install/share/po/help-de.pot')
| -rw-r--r-- | perl-install/share/po/help-de.pot | 1875 |
1 files changed, 1875 insertions, 0 deletions
diff --git a/perl-install/share/po/help-de.pot b/perl-install/share/po/help-de.pot index db0f0cf4a..716a370d7 100644 --- a/perl-install/share/po/help-de.pot +++ b/perl-install/share/po/help-de.pot @@ -5,6 +5,1088 @@ msgstr "" # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml msgid "" +"\"%s\": if a sound card is detected on your system, it is displayed here.\n" +"If you notice the sound card displayed is not the one that is actually\n" +"present on your system, you can click on the button and choose another\n" +"driver." +msgstr "" +"„%s“: if a sound card is detected on your system, it is displayed here. If\n" +"you notice the sound card displayed is not the one that is actually present\n" +"on your system, you can click on the button and choose another driver." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"If you told the installer that you wanted to individually select packages,\n" +"it will present a tree containing all packages classified by groups and\n" +"subgroups. While browsing the tree, you can select entire groups,\n" +"subgroups, or individual packages.\n" +"\n" +"Whenever you select a package on the tree, a description appears on the\n" +"right to let you know the purpose of the package.\n" +"\n" +"!! If a server package has been selected, either because you specifically\n" +"chose the individual package or because it was part of a group of packages,\n" +"you will be asked to confirm that you really want those servers to be\n" +"installed. By default Mandrake Linux will automatically start any installed\n" +"services at boot time. Even if they are safe and have no known issues at\n" +"the time the distribution was shipped, it is entirely possible that that\n" +"security holes were discovered after this version of Mandrake Linux was\n" +"finalized. If you do not know what a particular service is supposed to do\n" +"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" +"install the listed services and they will be started automatically by\n" +"default during boot. !!\n" +"\n" +"The \"%s\" option is used to disable the warning dialog which appears\n" +"whenever the installer automatically selects a package to resolve a\n" +"dependency issue. Some packages have relationships between each other such\n" +"that installation of a package requires that some other program is also\n" +"required to be installed. The installer can determine which packages are\n" +"required to satisfy a dependency to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows you to load a\n" +"package list created during a previous installation. This is useful if you\n" +"have a number of machines that you wish to configure identically. Clicking\n" +"on this icon will ask you to insert a floppy disk previously created at the\n" +"end of another installation. See the second tip of last step on how to\n" +"create such a floppy." +msgstr "" +"If you told the installer that you wanted to individually select packages,\n" +"it will present a tree containing all packages classified by groups and\n" +"subgroups. While browsing the tree, you can select entire groups,\n" +"subgroups, or individual packages.\n" +"\n" +"Whenever you select a package on the tree, a description appears on the\n" +"right to let you know the purpose of the package.\n" +"\n" +"!! If a server package has been selected, either because you specifically\n" +"chose the individual package or because it was part of a group of packages,\n" +"you will be asked to confirm that you really want those servers to be\n" +"installed. By default Mandrake Linux will automatically start any installed\n" +"services at boot time. Even if they are safe and have no known issues at\n" +"the time the distribution was shipped, it is entirely possible that that\n" +"security holes were discovered after this version of Mandrake Linux was\n" +"finalized. If you do not know what a particular service is supposed to do\n" +"or why it is being installed, then click „%s“. Clicking „%s“ will install\n" +"the listed services and they will be started automatically by default\n" +"during boot. !!\n" +"\n" +"The „%s“ option is used to disable the warning dialog which appears\n" +"whenever the installer automatically selects a package to resolve a\n" +"dependency issue. Some packages have relationships between each other such\n" +"that installation of a package requires that some other program is also\n" +"rerquired to be installed. The installer can determine which packages are\n" +"required to satisfy a dependency to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows you to load a\n" +"package list created during a previous installation. This is useful if you\n" +"have a number of machines that you wish to configure identically. Clicking\n" +"on this icon will ask you to insert a floppy disk previously created at the\n" +"end of another installation. See the second tip of last step on how to\n" +"create such a floppy." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"At this point, you need to decide where you want to install the Mandrake\n" +"Linux operating system on your hard drive. If your hard drive is empty or\n" +"if an existing operating system is using all the available space you will\n" +"have to partition the drive. Basically, partitioning a hard drive consists\n" +"of logically dividing it to create the space needed to install your new\n" +"Mandrake Linux system.\n" +"\n" +"Because the process of partitioning a hard drive is usually irreversible\n" +"and can lead to lost data if there is an existing operating system already\n" +"installed on the drive, partitioning can be intimidating and stressful if\n" +"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" +"simplifies this process. Before continuing with this step, read through the\n" +"rest of this section and above all, take your time.\n" +"\n" +"Depending on your hard drive configuration, several options are available:\n" +"\n" +" * \"%s\": this option will perform an automatic partitioning of your blank\n" +"drive(s). If you use this option there will be no further prompts.\n" +"\n" +" * \"%s\": the wizard has detected one or more existing Linux partitions on\n" +"your hard drive. If you want to use them, choose this option. You will then\n" +"be asked to choose the mount points associated with each of the partitions.\n" +"The legacy mount points are selected by default, and for the most part it's\n" +"a good idea to keep them.\n" +"\n" +" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" +"all the space available on it, you will have to create free space for\n" +"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" +"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" +"FAT or NTFS partition. Resizing can be performed without the loss of any\n" +"data, provided you have previously defragmented the Windows partition.\n" +"Backing up your data is strongly recommended.. Using this option is\n" +"recommended if you want to use both Mandrake Linux and Microsoft Windows on\n" +"the same computer.\n" +"\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"then when you started. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software.\n" +"\n" +" * \"%s\": if you want to delete all data and all partitions present on\n" +"your hard drive and replace them with your new Mandrake Linux system,\n" +"choose this option. Be careful, because you will not be able to undo your\n" +"choice after you confirm.\n" +"\n" +" !! If you choose this option, all data on your disk will be deleted. !!\n" +"\n" +" * \"%s\": this will simply erase everything on the drive and begin fresh,\n" +"partitioning everything from scratch. All data on your disk will be lost.\n" +"\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * \"%s\": choose this option if you want to manually partition your hard\n" +"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" +"easily lose all your data. That's why this option is really only\n" +"recommended if you have done something like this before and have some\n" +"experience. For more instructions on how to use the DiskDrake utility,\n" +"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." +msgstr "" +"At this point, you need to decide where you want to install the Mandrake\n" +"Linux operating system on your hard drive. If your hard drive is empty or\n" +"if an existing operating system is using all the available space you will\n" +"have to partition the drive. Basically, partitioning a hard drive consists\n" +"of logically dividing it to create the space needed to install your new\n" +"Mandrake Linux system.\n" +"\n" +"Because the process of partitioning a hard drive is usually irreversible\n" +"and can lead to lost data if there is an existing operating system already\n" +"installed on the drive, partitioning can be intimidating and stressful if\n" +"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" +"simplifies this process. Before continuing with this step, read through the\n" +"rest of this section and above all, take your time.\n" +"\n" +"Depending on your hard drive configuration, several options are available:\n" +"\n" +" * „%s“: this option will perform an automatic partitioning of your blank\n" +"drive(s). If you use this option there will be no further prompts.\n" +"\n" +" * „%s“: the wizard has detected one or more existing Linux partitions on\n" +"your hard drive. If you want to use them, choose this option. You will then\n" +"be asked to choose the mount points associated with each of the partitions.\n" +"The legacy mount points are selected by default, and for the most part it's\n" +"a good idea to keep them.\n" +"\n" +" * „%s“: if Microsoft Windows is installed on your hard drive and takes all\n" +"the space available on it, you will have to create free space for Linux. To\n" +"do so, you can delete your Microsoft Windows partition and data (see „Erase\n" +"entire disk“ solution) or resize your Microsoft Windows FAT or NTFS\n" +"partition. Resizing can be performed without the loss of any data, provided\n" +"you have previously defragmented the Windows partition. Backing up your\n" +"data is strongly recommended.. Using this option is recommended if you want\n" +"to use both Mandrake Linux and Microsoft Windows on the same computer.\n" +"\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"then when you started. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software.\n" +"\n" +" * „%s“: if you want to delete all data and all partitions present on your\n" +"hard drive and replace them with your new Mandrake Linux system, choose\n" +"this option. Be careful, because you will not be able to undo your choice\n" +"after you confirm.\n" +"\n" +" !! If you choose this option, all data on your disk will be deleted. !!\n" +"\n" +" * „%s“: this will simply erase everything on the drive and begin fresh,\n" +"partitioning everything from scratch. All data on your disk will be lost.\n" +"\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * „%s“: choose this option if you want to manually partition your hard\n" +"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" +"easily lose all your data. That's why this option is really only\n" +"recommended if you have done something like this before and have some\n" +"experience. For more instructions on how to use the DiskDrake utility,\n" +"refer to the „Ihre Partitionen verwalten“ section in the „Starter\n" +"Handbuch“." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"DrakX will first detect any IDE devices present in your computer. It will\n" +"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection is not foolproof, DrakX may fail in detecting\n" +"your hard drives. If so, you'll have to specify your hardware by hand.\n" +"\n" +"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" +"want to configure options for it. You should allow DrakX to probe the\n" +"hardware for the card-specific options which are needed to initialize the\n" +"adapter. Most of the time, DrakX will get through this step without any\n" +"issues.\n" +"\n" +"If DrakX is not able to probe for the options to automatically determine\n" +"which parameters need to be passed to the hardware, you'll need to manually\n" +"configure the driver." +msgstr "" +"DrakX will first detect any IDE devices present in your computer. It will\n" +"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection is not foolproof, DrakX may fail in detecting\n" +"your hard drives. If so, you'll have to specify your hardware by hand.\n" +"\n" +"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" +"want to configure options for it. You should allow DrakX to probe the\n" +"hardware for the card-specific options which are needed to initialize the\n" +"adapter. Most of the time, DrakX will get through this step without any\n" +"issues.\n" +"\n" +"If DrakX is not able to probe for the options to automatically determine\n" +"which parameters need to be passed to the hardware, you'll need to manually\n" +"configure the driver." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"The Mandrake Linux installation is distributed on several CD-ROMs. If a\n" +"selected package is located on another CD-ROM, DrakX will eject the current\n" +"CD and ask you to insert the correct CD as required." +msgstr "" +"The Mandrake Linux installation is distributed on several CD-ROMs. If a\n" +"selected package is located on another CD-ROM, DrakX will eject the current\n" +"CD and ask you to insert the correct CD as required." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"It is now time to specify which programs you wish to install on your\n" +"system. There are thousands of packages available for Mandrake Linux, and\n" +"to make it simpler to manage the packages have been placed into groups of\n" +"similar applications.\n" +"\n" +"Packages are sorted into groups corresponding to a particular use of your\n" +"machine. Mandrake Linux sorts packages groups in four categories. You can\n" +"mix and match applications from the various categories, so a\n" +"``Workstation'' installation can still have applications from the\n" +"``Development'' category installed.\n" +"\n" +" * \"%s\": if you plan to use your machine as a workstation, select one or\n" +"more of the groups that are in the workstation category.\n" +"\n" +" * \"%s\": if plan on using your machine for programming, select the\n" +"appropriate groups from that category.\n" +"\n" +" * \"%s\": if your machine is intended to be a server, select which of the\n" +"more common services you wish to install on your machine.\n" +"\n" +" * \"%s\": this is where you will choose your preferred graphical\n" +"environment. At least one must be selected if you want to have a graphical\n" +"interface available.\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group. If you unselect all groups when performing a regular\n" +"installation (as opposed to an upgrade), a dialog will pop up proposing\n" +"different options for a minimal installation:\n" +"\n" +" * \"%s\": install the minimum number of packages possible to have a\n" +"working graphical desktop.\n" +"\n" +" * \"%s\": installs the base system plus basic utilities and their\n" +"documentation. This installation is suitable for setting up a server.\n" +"\n" +" * \"%s\": will install the absolute minimum number of packages necessary\n" +"to get a working Linux system. With this installation you will only have a\n" +"command line interface. The total size of this installation is about 65\n" +"megabytes.\n" +"\n" +"You can check the \"%s\" box, which is useful if you are familiar with the\n" +"packages being offered or if you want to have total control over what will\n" +"be installed.\n" +"\n" +"If you started the installation in \"%s\" mode, you can unselect all groups\n" +"to avoid installing any new package. This is useful for repairing or\n" +"updating an existing system." +msgstr "" +"It is now time to specify which programs you wish to install on your\n" +"system. There are thousands of packages available for Mandrake Linux, and\n" +"to make it simpler to manage the packages have been placed into groups of\n" +"similar applications.\n" +"\n" +"Packages are sorted into groups corresponding to a particular use of your\n" +"machine. Mandrake Linux sorts packages groups in four categories. You can\n" +"mix and match applications from the various categories, so a „Workstation“\n" +"installation can still have applications from the „Development“ category\n" +"installed.\n" +"\n" +" * „%s“: if you plan to use your machine as a workstation, select one or\n" +"more of the groups that are in the workstation category.\n" +"\n" +" * „%s“: if plan on using your machine for programming, select the\n" +"appropriate groups from that category.\n" +"\n" +" * „%s“: if your machine is intended to be a server, select which of the\n" +"more common services you wish to install on your machine.\n" +"\n" +" * „%s“: this is where you will choose your preferred graphical\n" +"environment. At least one must be selected if you want to have a graphical\n" +"interface available.\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group. If you unselect all groups when performing a regular\n" +"installation (as opposed to an upgrade), a dialog will pop up proposing\n" +"different options for a minimal installation:\n" +"\n" +" * „%s“: install the minimum number of packages possible to have a working\n" +"graphical desktop.\n" +"\n" +" * „%s“: installs the base system plus basic utilities and their\n" +"documentation. This installation is suitable for setting up a server.\n" +"\n" +" * „%s“: will install the absolute minimum number of packages necessary to\n" +"get a working Linux system. With this installation you will only have a\n" +"command line interface. The total size of this installation is about 65\n" +"megabytes.\n" +"\n" +"You can check the „%s“ box, which is useful if you are familiar with the\n" +"packages being offered or if you want to have total control over what will\n" +"be installed.\n" +"\n" +"If you started the installation in „%s“ mode, you can unselect all groups\n" +"to avoid installing any new package. This is useful for repairing or\n" +"updating an existing system." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"This step is activated only if an old GNU/Linux partition has been found on\n" +"your machine.\n" +"\n" +"DrakX now needs to know if you want to perform a new install or an upgrade\n" +"of an existing Mandrake Linux system:\n" +"\n" +" * \"%s\": For the most part, this completely wipes out the old system. If\n" +"you wish to change how your hard drives are partitioned, or change the file\n" +"system, you should use this option. However, depending on your partitioning\n" +"scheme, you can prevent some of your existing data from being over-written.\n" +"\n" +" * \"%s\": this installation class allows you to update the packages\n" +"currently installed on your Mandrake Linux system. Your current\n" +"partitioning scheme and user data is not altered. Most of other\n" +"configuration steps remain available, similar to a standard installation.\n" +"\n" +"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" +"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" +"to Mandrake Linux version \"8.1\" is not recommended." +msgstr "" +"This step is activated only if an old GNU/Linux partition has been found on\n" +"your machine.\n" +"\n" +"DrakX now needs to know if you want to perform a new install or an upgrade\n" +"of an existing Mandrake Linux system:\n" +"\n" +" * „%s“: For the most part, this completely wipes out the old system. If\n" +"you wish to change how your hard drives are partitioned, or change the file\n" +"system, you should use this option. However, depending on your partitioning\n" +"scheme, you can prevent some of your existing data from being over-written.\n" +"\n" +" * „%s“: this installation class allows you to update the packages\n" +"currently installed on your Mandrake Linux system. Your current\n" +"partitioning scheme and user data is not altered. Most of other\n" +"configuration steps remain available, similar to a standard installation.\n" +"\n" +"Using the „Upgrade“ option should work fine on Mandrake Linux systems\n" +"running version „8.1“ or later. Performing an Upgrade on versions prior to\n" +"Mandrake Linux version „8.1“ is not recommended." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting means creating a file system).\n" +"\n" +"At this time, you may wish to reformat some already existing partitions to\n" +"erase any data they contain. If you wish to do that, please select those\n" +"partitions as well.\n" +"\n" +"Please note that it is not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" +"reformat partitions containing data that you wish to keep (typically\n" +"\"/home\").\n" +"\n" +"Please be careful when selecting partitions. After formatting, all data on\n" +"the selected partitions will be deleted and you will not be able to recover\n" +"it.\n" +"\n" +"Click on \"%s\" when you are ready to format partitions.\n" +"\n" +"Click on \"%s\" if you want to choose another partition for your new\n" +"Mandrake Linux operating system installation.\n" +"\n" +"Click on \"%s\" if you wish to select partitions that will be checked for\n" +"bad blocks on the disk." +msgstr "" +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting means creating a file system).\n" +"\n" +"At this time, you may wish to reformat some already existing partitions to\n" +"erase any data they contain. If you wish to do that, please select those\n" +"partitions as well.\n" +"\n" +"Please note that it is not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as „/“, „/usr“ or „/var“) but you do not have to reformat\n" +"partitions containing data that you wish to keep (typically „/home“).\n" +"\n" +"Please be careful when selecting partitions. After formatting, all data on\n" +"the selected partitions will be deleted and you will not be able to recover\n" +"it.\n" +"\n" +"Click on „%s“ when you are ready to format partitions.\n" +"\n" +"Click on „%s“ if you want to choose another partition for your new Mandrake\n" +"Linux operating system installation.\n" +"\n" +"Click on „%s“ if you wish to select partitions that will be checked for bad\n" +"blocks on the disk." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." +msgstr "" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check „%s“\n" +"if your machine is to act as a server, or if you were not successful in\n" +"getting the display configured." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Click on \"%s\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" +"\n" +"Click on \"%s\" to stop this operation without losing any data and\n" +"partitions present on this hard drive." +msgstr "" +"Click on „%s“ if you want to delete all data and partitions present on this\n" +"hard drive. Be careful, after clicking on „%s“, you will not be able to\n" +"recover any data and partitions present on this hard drive, including any\n" +"Windows data.\n" +"\n" +"Click on „%s“ to stop this operation without losing any data and partitions\n" +"present on this hard drive." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Bugs may have been\n" +"fixed, security issues resolved. To allow you to benefit from these\n" +"updates, you are now able to download them from the Internet. Check \"%s\"\n" +"if you have a working Internet connection, or \"%s\" if you prefer to\n" +"install updated packages later.\n" +"\n" +"Choosing \"%s\" will display a list of places from which updates can be\n" +"retrieved. You should choose one near to you. A package-selection tree will\n" +"appear: review the selection, and press \"%s\" to retrieve and install the\n" +"selected package(s), or \"%s\" to abort." +msgstr "" +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Bugs may have been\n" +"fixed, security issues resolved. To allow you to benefit from these\n" +"updates, you are now able to download them from the Internet. Check „%s“ if\n" +"you have a working Internet connection, or „%s“ if you prefer to install\n" +"updated packages later.\n" +"\n" +"Choosing „%s“ will display a list of places from which updates can be\n" +"retrieved. You should choose one near to you. A package-selection tree will\n" +"appear: review the selection, and press „%s“ to retrieve and install the\n" +"selected package(s), or „%s“ to abort." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Depending on the language you chose in section , DrakX will automatically\n" +"select a particular type of keyboard configuration. Check the selection\n" +"suits you or choose another keyboard layout.\n" +"\n" +"Also, you may not have a keyboard that corresponds exactly to your\n" +"language: for example, if you are an English-speaking Swiss native, you may\n" +"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" +"you may find yourself in the same situation where your native language and\n" +"country-set keyboard do not match. In either case, this installation step\n" +"will allow you to select an appropriate keyboard from a list.\n" +"\n" +"Click on the \"%s\" button to be presented with the complete list of\n" +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" +"dialog will allow you to choose the key binding that will switch the\n" +"keyboard between the Latin and non-Latin layouts." +msgstr "" +"Depending on the language you chose in section , DrakX will automatically\n" +"select a particular type of keyboard configuration. Check the selection\n" +"suits you or chose another keyboard layout.\n" +"\n" +"Also, you may not have a keyboard that corresponds exactly to your\n" +"language: for example, if you are an English speaking Swiss person, you may\n" +"have a Swiss keyboard. Or if you speak English but are located in Québec,\n" +"you may find yourself in the same situation where your native language and\n" +"keyboard do not match. In either case, this installation step will allow\n" +"you to select an appropriate keyboard from a list.\n" +"\n" +"Click on the „%s“ button to be presented with the complete list of\n" +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" +"dialog will allow you to choose the key binding that will switch the\n" +"keyboard between the Latin and non-Latin layouts." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"You will now set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click \"%s\".\n" +"Mandrake Linux will attempt to auto-detect network devices and modems. If\n" +"this detection fails, uncheck the \"%s\" box. You may also choose not to\n" +"configure the network, or to do it later, in which case clicking the \"%s\"\n" +"button will take you to the next step.\n" +"\n" +"When configuring your network, the available connections options are:\n" +"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n" +"cable modem, and finally a simple LAN connection (Ethernet).\n" +"\n" +"We will not detail each configuration option - just make sure that you have\n" +"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" +"from your Internet Service Provider or system administrator.\n" +"\n" +"Winmodems are special integrated low-end modems that require an additional\n" +"software to work compared to Normal modems. Some of those modems actually\n" +"work under Mandrake Linux, some others not. You can consult the list of\n" +"supported modems at LinModems.\n" +"\n" +"You can consult the ``Starter Guide'' chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" +"installed and use the program described there to configure your connection." +msgstr "" +"You will now set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click „%s“.\n" +"Mandrake Linux will attempt to autodetect network devices and modems. If\n" +"this detection fails, uncheck the „%s“ box. You may also choose not to\n" +"configure the network, or to do it later, in which case clicking the „%s“\n" +"button will take you to the next step.\n" +"\n" +"When configuring your network, the available connections options are:\n" +"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n" +"cable modem, and finally a simple LAN connection (Ethernet).\n" +"\n" +"We will not detail each configuration option - just make sure that you have\n" +"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" +"from your Internet Service Provider or system administrator.\n" +"\n" +"Winmodems are special integrated low-end modems that require an additional\n" +"software to work compared to Normal modems. Some of those modems actually\n" +"work under Mandrake Linux, some others not. You can consult the the list of\n" +"supported modems at LinModems.\n" +"\n" +"You can consult the „Starter Handbuch“ chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" +"installed and use the program described there to configure your connection." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" +"\n" +"You will be presented with a list of different parameters to change to get\n" +"an optimal graphical display: Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs.\n" +"\n" +"\n" +"\n" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer.\n" +"\n" +"\n" +"\n" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor picture.\n" +"\n" +"\n" +"\n" +"Test\n" +"\n" +" Depending on your hardware, this entry might not appear.\n" +"\n" +" the system will try to open a graphical screen at the desired\n" +"resolution. If you can see the message during the test and answer \"%s\",\n" +"then DrakX will proceed to the next step. If you cannot see the message, it\n" +"means that some part of the auto-detected configuration was incorrect and\n" +"the test will automatically end after 12 seconds, bringing you back to the\n" +"menu. Change settings until you get a correct graphical display.\n" +"\n" +"\n" +"\n" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." +msgstr "" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" +"\n" +"You will be presented with a list of different parameters to change to get\n" +"an optimal graphical display: Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs.\n" +"\n" +"\n" +"\n" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer.\n" +"\n" +"\n" +"\n" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor picture.\n" +"\n" +"\n" +"\n" +"Test\n" +"\n" +" Depending on your hardware, this entry might not appear.\n" +"\n" +" the system will try to open a graphical screen at the desired\n" +"resolution. If you can see the message during the test and answer „%s“,\n" +"then DrakX will proceed to the next step. If you cannot see the message, it\n" +"means that some part of the autodetected configuration was incorrect and\n" +"the test will automatically end after 12 seconds, bringing you back to the\n" +"menu. Change settings until you get a correct graphical display.\n" +"\n" +"\n" +"\n" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check „%s“\n" +"if your machine is to act as a server, or if you were not successful in\n" +"getting the display configured." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor picture." +msgstr "" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor picture." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" +"information on how to setup a new printer. The interface presented there is\n" +"similar to the one used during installation." +msgstr "" +"„%s“: clicking on the „%s“ button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the „Starter Handbuch“ for\n" +"more information on how to setup a new printer. The interface presented\n" +"there is similar to the one used during installation." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Now, it's time to select a printing system for your computer. Other OSs may\n" +"offer you one, but Mandrake Linux offers two. Each of the printing system\n" +"is best suited to particular types of configuration.\n" +"\n" +" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" +"if you have a direct connection to your printer, you want to be able to\n" +"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" +"will handle only very simple network cases and is somewhat slow when used\n" +"with networks.) It's recommended that you use \"pdq\" if this is your first\n" +"experience with GNU/Linux.\n" +"\n" +" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" +"printing to your local printer or to one halfway around the planet. It is\n" +"simple to configure and can act as a server or a client for the ancient\n" +"\"lpd \" printing system, so it compatible with older operating systems\n" +"which may still need print services. While quite powerful, the basic setup\n" +"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" +"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" +"front-ends for printing or choosing printer options and for managing the\n" +"printer.\n" +"\n" +"If you make a choice now, and later find that you don't like your printing\n" +"system you may change it by running PrinterDrake from the Mandrake Control\n" +"Center and clicking the expert button." +msgstr "" +"Now, it's time to select a printing system for your computer. Other OSs may\n" +"offer you one, but Mandrake Linux offers two. Each of the printing system\n" +"is best suited to particular types of configuration.\n" +"\n" +" * „%s“ -- which is an acronym for „print, don't queue“, is the choice if\n" +"you have a direct connection to your printer, you want to be able to panic\n" +"out of printer jams, and you do not have networked printers. („%s“ will\n" +"handle only very simple network cases and is somewhat slow when used with\n" +"networks.) It's recommended that you use „pdq“ if this is your first\n" +"experience with GNU/Linux.\n" +"\n" +" * „%s“ - „ Common Unix Printing System“, is an excellent choice for\n" +"printing to your local printer or to one halfway around the planet. It is\n" +"simple to configure and can act as a server or a client for the ancient\n" +"„lpd “ printing system, so it compatible with older operating systems which\n" +"may still need print services. While quite powerful, the basic setup is\n" +"almost as easy as „pdq“. If you need to emulate a „lpd“ server, make sure\n" +"you turn on the „cups-lpd “ daemon. „%s“ includes graphical front-ends for\n" +"printing or choosing printer options and for managing the printer.\n" +"\n" +"If you make a choice now, and later find that you don't like your printing\n" +"system you may change it by running PrinterDrake from the Mandrake Control\n" +"Center and clicking the expert button." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you have to enter the \"root\" password. \"Root\" is the system\n" +"administrator and is the only user authorized to make updates, add users,\n" +"change the overall system configuration, and so on. In short, \"root\" can\n" +"do everything! That is why you must choose a password that is difficult to\n" +"guess - DrakX will tell you if the password you chose is too easy. As you\n" +"can see, you are not forced to enter a password, but we strongly advise you\n" +"against this. GNU/Linux is just as prone to operator error as any other\n" +"operating system. Since \"root\" can overcome all limitations and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves, it is important that it be difficult to become\n" +"\"root\".\n" +"\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the \"root\" password -- it makes it far\n" +"too easy to compromise a system.\n" +"\n" +"One caveat -- do not make the password too long or complicated because you\n" +"must be able to remember it!\n" +"\n" +"The password will not be displayed on screen as you type it in. To reduce\n" +"the chance of a blind typing error you will need to enter the password\n" +"twice. If you do happen to make the same typing error twice, this\n" +"``incorrect'' password will be the one you will have use the first time you\n" +"connect.\n" +"\n" +"If you wish access to this computer to be controlled by an authentication\n" +"server, click the \"%s\" button.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one for \"%s\". If you do not know which\n" +"one to use, you should ask your network administrator.\n" +"\n" +"If you happen to have problems with remembering passwords, if your computer\n" +"will never be connected to the Internet and you absolutely trust everybody\n" +"who uses your computer, you can choose to have \"%s\"." +msgstr "" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you have to enter the „root“ password. „Root“ is the system\n" +"administrator and is the only user authorized to make updates, add users,\n" +"change the overall system configuration, and so on. In short, „root“ can do\n" +"everything! That is why you must choose a password that is difficult to\n" +"guess - DrakX will tell you if the password you chose is too easy. As you\n" +"can see, you are not forced to enter a password, but we strongly advise you\n" +"against this. GNU/Linux is just as prone to operator error as any other\n" +"operating system. Since „root“ can overcome all limitations and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves, it is important that it be difficult to become\n" +"„root“.\n" +"\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the „root“ password -- it makes it far\n" +"too easy to compromise a system.\n" +"\n" +"One caveat -- do not make the password too long or complicated because you\n" +"must be able to remember it!\n" +"\n" +"The password will not be displayed on screen as you type it in. To reduce\n" +"the chance of a blind typing error you will need to enter the password\n" +"twice. If you do happen to make the same typing error twice, this\n" +"„incorrect“ password will be the one you will have use the first time you\n" +"connect.\n" +"\n" +"If you wish access to this computer to be controlled by an authentication\n" +"server, click the „%s“ button.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one for „%s“. If you do not know which one\n" +"to use, you should ask your network administrator.\n" +"\n" +"If you happen to have problems with remembering passwords, if your computer\n" +"will never be connected to the internet and you absolutely trust everybody\n" +"who uses your computer, you can choose to have „%s“." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." +msgstr "" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"You can add additional entries in yaboot for other operating systems,\n" +"alternate kernels, or for an emergency boot image.\n" +"\n" +"For other OSs, the entry consists only of a label and the \"root\"\n" +"partition.\n" +"\n" +"For Linux, there are a few possible options:\n" +"\n" +" * Label: this is the name you will have to type at the yaboot prompt to\n" +"select this boot option.\n" +"\n" +" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" +"variation of vmlinux with an extension.\n" +"\n" +" * Root: the \"root\" device or ``/'' for your Linux installation.\n" +"\n" +" * Append: on Apple hardware, the kernel append option is often used to\n" +"assist in initializing video hardware, or to enable keyboard mouse button\n" +"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" +"The following are some examples:\n" +"\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" +"hda=autotune\n" +"\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" +"\n" +" * Initrd: this option can be used either to load initial modules before\n" +"the boot device is available, or to load a ramdisk image for an emergency\n" +"boot situation.\n" +"\n" +" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" +"need to allocate a large ramdisk, this option can be used to specify a\n" +"ramdisk larger than the default.\n" +"\n" +" * Read-write: normally the \"root\" partition is initially mounted as\n" +"read-only, to allow a file system check before the system becomes ``live''.\n" +"You can override the default with this option.\n" +"\n" +" * NoVideo: should the Apple video hardware prove to be exceptionally\n" +"problematic, you can select this option to boot in ``novideo'' mode, with\n" +"native frame buffer support.\n" +"\n" +" * Default: selects this entry as being the default Linux selection,\n" +"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" +"highlighted with a ``*'' if you press [Tab] to see the boot selections." +msgstr "" +"You can add additional entries in yaboot for other operating systems,\n" +"alternate kernels, or for an emergency boot image.\n" +"\n" +"For other OSs, the entry consists only of a label and the „root“ partition.\n" +"\n" +"For Linux, there are a few possible options:\n" +"\n" +" * Label: this is the name you will have to type at the yaboot prompt to\n" +"select this boot option.\n" +"\n" +" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" +"variation of vmlinux with an extension.\n" +"\n" +" * Root: the „root“ device or „/“ for your Linux installation.\n" +"\n" +" * Append: on Apple hardware, the kernel append option is often used to\n" +"assist in initializing video hardware, or to enable keyboard mouse button\n" +"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" +"The following are some examples:\n" +"\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" +"hda=autotune\n" +"\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" +"\n" +" * Initrd: this option can be used either to load initial modules before\n" +"the boot device is available, or to load a ramdisk image for an emergency\n" +"boot situation.\n" +"\n" +" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" +"need to allocate a large ramdisk, this option can be used to specify a\n" +"ramdisk larger than the default.\n" +"\n" +" * Read-write: normally the „root“ partition is initially mounted as\n" +"read-only, to allow a file system check before the system becomes „live“.\n" +"You can override the default with this option.\n" +"\n" +" * NoVideo: should the Apple video hardware prove to be exceptionally\n" +"problematic, you can select this option to boot in „novideo“ mode, with\n" +"native frame buffer support.\n" +"\n" +" * Default: selects this entry as being the default Linux selection,\n" +"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" +"highlighted with a „*“ if you press [Tab] to see the boot selections." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" +"local time according to the time zone you selected. If the clock on your\n" +"motherboard is set to local time, you may deactivate this by unselecting\n" +"\"%s\", which will let GNU/Linux know that the system clock and the\n" +"hardware clock are in the same time zone. This is useful when the machine\n" +"also hosts another operating system like Windows.\n" +"\n" +"The \"%s\" option will automatically regulate the clock by connecting to a\n" +"remote time server on the Internet. For this feature to work, you must have\n" +"a working Internet connection. It is best to choose a time server located\n" +"near you. This option actually installs a time server that can be used by\n" +"other machines on your local network as well." +msgstr "" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" +"local time according to the time zone you selected. If the clock on your\n" +"motherboard is set to local time, you may deactivate this by unselecting\n" +"„%s“, which will let GNU/Linux know that the system clock and the hardware\n" +"clock are in the same timezone. This is useful when the machine also hosts\n" +"another operating system like Windows.\n" +"\n" +"The „%s“ option will automatically regulate the clock by connecting to a\n" +"remote time server on the Internet. For this feature to work, you must have\n" +"a working Internet connection. It is best to choose a time server located\n" +"near you. This option actually installs a time server that can be used by\n" +"other machines on your local network as well." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Usually, DrakX has no problems detecting the number of buttons on your\n" +"mouse. If it does, it assumes you have a two-button mouse and will\n" +"configure it for third-button emulation. The third-button mouse button of a\n" +"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" +"right mouse buttons. DrakX will automatically know whether your mouse uses\n" +"a PS/2, serial or USB interface.\n" +"\n" +"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n" +"that says \"%s\". DrakX will then configure your mouse so that you can\n" +"simulate the wheel with it: to do so, press the middle button and move your\n" +"mouse up and down.\n" +"\n" +"If for some reason you wish to specify a different type of mouse, select it\n" +"from the list provided.\n" +"\n" +"If you choose a mouse other than the default, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct and that the mouse is working correctly. If the mouse is not\n" +"working well, press the space bar or [Return] key to cancel the test and to\n" +"go back to the list of choices.\n" +"\n" +"Wheel mice are occasionally not detected automatically, so you will need to\n" +"select your mouse from a list. Be sure to select the one corresponding to\n" +"the port that your mouse is attached to. After selecting a mouse and\n" +"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" +"the mouse wheel to ensure that it is activated correctly. Once you see the\n" +"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" +"buttons and check that the mouse pointer moves on-screen as you move your\n" +"mouse." +msgstr "" +"Usually, DrakX has no problems detecting the number of buttons on your\n" +"mouse. If it does, it assumes you have a two-button mouse and will\n" +"configure it for third-button emulation. The third-button mouse button of a\n" +"two-button mouse can be „pressed“ by simultaneously clicking the left and\n" +"right mouse buttons. DrakX will automatically know whether your mouse uses\n" +"a PS/2, serial or USB interface.\n" +"\n" +"If for some reason you wish to specify a different type of mouse, select it\n" +"from the list provided.\n" +"\n" +"If you choose a mouse other than the default, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct and that the mouse is working correctly. If the mouse is not\n" +"working well, press the space bar or [Return] key to cancel the test and to\n" +"go back to the list of choices.\n" +"\n" +"Wheel mice are occasionally not detected automatically, so you will need to\n" +"select your mouse from a list. Be sure to select the one corresponding to\n" +"the port that your mouse is attached to. After selecting a mouse and\n" +"pressing the „%s“ button, a mouse image is displayed on-screen. Scroll the\n" +"mouse wheel to ensure that it is activated correctly. Once you see the\n" +"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" +"buttons and check that the mouse pointer moves on-screen as you move your\n" +"mouse." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." +msgstr "" +"Please select the correct port. For example, the „COM1“ port under Windows\n" +"is named „ttyS0“ under GNU/Linux." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" @@ -85,6 +1167,171 @@ msgstr "" # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml msgid "" +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose which one you want to resize in order to install your new\n" +"Mandrake Linux operating system.\n" +"\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" +"\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." +msgstr "" +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose which one you want to resize in order to install your new\n" +"Mandrake Linux operating system.\n" +"\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" +"\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"After you have configured the general bootloader parameters, the list of\n" +"boot options that will be available at boot time will be displayed.\n" +"\n" +"If there are other operating systems installed on your machine they will\n" +"automatically be added to the boot menu. You can fine-tune the existing\n" +"options by clicking \"%s\" to create a new entry; selecting an entry and\n" +"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" +"changes.\n" +"\n" +"You may also not want to give access to these other operating systems to\n" +"anyone who goes to the console and reboots the machine. You can delete the\n" +"corresponding entries for the operating systems to remove them from the\n" +"bootloader menu, but you will need a boot disk in order to boot those other\n" +"operating systems!" +msgstr "" +"After you have configured the general bootloader parameters, the list of\n" +"boot options that will be available at boot time will be displayed.\n" +"\n" +"If there are other operating systems installed on your machine they will\n" +"automatically be added to the boot menu. You can fine-tune the existing\n" +"options by clicking „%s“ to create a new entry; selecting an entry and\n" +"clicking „%s“ or „%s“ to modify or remove it. „%s“ validates your changes.\n" +"\n" +"You may also not want to give access to these other operating systems to\n" +"anyone who goes to the console and reboots the machine. You can delete the\n" +"corresponding entries for the operating systems to remove them from the\n" +"bootloader menu, but you will need a boot disk in order to boot those other\n" +"operating systems!" + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"This dialog allows you to fine tune your bootloader:\n" +"\n" +" * \"%s\": there are three choices for your bootloader:\n" +"\n" +" * \"%s\": if you prefer grub (text menu).\n" +"\n" +" * \"%s\": if you prefer LILO with its text menu interface.\n" +"\n" +" * \"%s\": if you prefer LILO with its graphical interface.\n" +"\n" +" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" +"you prefer, the bootloader can be installed on the second hard drive\n" +"(\"%s\"), or even on a floppy disk (\"%s\");\n" +"\n" +" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" +"given to the user at the console to select a boot entry other than the\n" +"default.\n" +"\n" +" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n" +"management, notably for laptops. If you know your hardware supports it and\n" +"you need it, check this box.\n" +"\n" +" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n" +"instabilities, machine freeze, ...) you should try disabling APIC by\n" +"checking this box.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting\n" +"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" +"system! Be sure you know what you are doing before changing any of the\n" +"options. !!\n" +"\n" +"Clicking the \"%s\" button in this dialog will offer advanced options which\n" +"are normally reserved for the expert user." +msgstr "" +"This dialog allows you to fine tune your bootloader:\n" +"\n" +" * „%s“: there are three choices for your bootloader:\n" +"\n" +" * „%s“: if you prefer grub (text menu).\n" +"\n" +" * „%s“: if you prefer LILO with its text menu interface.\n" +"\n" +" * „%s“: if you prefer LILO with its graphical interface.\n" +"\n" +" * „%s“: in most cases, you will not change the default („%s“), but if you\n" +"prefer, the bootloader can be installed on the second hard drive („%s“), or\n" +"even on a floppy disk („%s“);\n" +"\n" +" * „%s“: after a boot or a reboot of the computer, this is the delay given\n" +"to the user at the console to select a boot entry other than the default.\n" +"\n" +" * „%s“: ACPI is a new standard (appeared during year 2002) for power\n" +"management, notably for laptops. If you know your hardware supports it and\n" +"you need it, check this box.\n" +"\n" +" * „%s“: If you noticed hardware problems on your machine (IRQ conflicts,\n" +"instabilities, machine freeze, ...) you should try disabling APIC by\n" +"checking this box.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting\n" +"„%s“), you must ensure that you have a way to boot your Mandrake Li
my @l = sort grep { $conf{$_}{alias} && /scsi_hostadapter/ } keys %conf;
add_alias('block-major-11', 'scsi_hostadapter') if @l;
push @l, "ide-floppy" if detect_devices::ide_zips();
$conf{supermount}{"post-install"} = join " ; ", map { "modprobe $_" } @l if @l;
$conf{"usb-storage"}{"post-install"} = "modprobe usbkbd; modprobe keybdev" if @l && arch() !~ /sparc|alpha/;
local *F;
open F, ">> $file" or die("cannot write module config file $file: $!\n");
while (my ($mod, $h) = each %conf) {
while (my ($type, $v2) = each %$h) {
print F "$type $mod $v2\n" if $v2 && $type ne "loaded" && !$written->{$mod}{$type};
}
}
}
sub read_stage1_conf {
add2hash(\%conf, read_conf($_[0], \$scsi));
if (arch() =~ /sparc/) {
$conf{parport_lowlevel}{alias} ||= "parport_ax";
$conf{plip}{"pre-install"} ||= "modprobe parport_ax ; echo 7 > /proc/parport/0/irq"; #- TOCHECK
} else {
$conf{parport_lowlevel}{alias} ||= "parport_pc";
$conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start";
$conf{plip}{"pre-install"} ||= "modprobe parport_pc ; echo 7 > /proc/parport/0/irq";
}
}
sub load_thiskind($;&$) {
my ($type, $f, $pcic) = @_;
my %loaded_text;
my @devs = detect_devices::matching_type($type, $pcic);
log::l("probe found " . scalar @devs . " $type devices");
my %devs; foreach (@devs) {
my ($text, $mod) = ($_->{description}, $_->{driver});€žmformat a:“)" + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"At this point, DrakX will allow you to choose the security level desired\n" +"for the machine. As a rule of thumb, the security level should be set\n" +"higher if the machine will contain crucial data, or if it will be a machine\n" +"directly exposed to the Internet. The trade-off of a higher security level\n" +"is generally obtained at the expense of ease of use.\n" +"\n" +"If you do not know what to choose, stay with the default option. You will\n" +"be able to change that security level later with tool draksec from the\n" +"Mandrake Control Center.\n" +"\n" +"The \"%s\" field can inform the system of the user on this computer that\n" +"will be responsible for security. Security messages will be sent to that\n" +"address." +msgstr "" +"At this point, DrakX will allow you to choose the security level desired\n" +"for the machine. As a rule of thumb, the security level should be set\n" +"higher if the machine will contain crucial data, or if it will be a machine\n" +"directly exposed to the Internet. The trade-off of a higher security level\n" +"is generally obtained at the expense of ease of use.\n" +"\n" +"If you do not know what to choose, stay with the default option. You will\n" +"be able to change that security level later with tool draksec from the\n" +"Mandrake Control Center.\n" +"\n" +"The „%s“ field can inform the system of the user on this computer that will\n" +"be responsible for security. Security messages will be sent to that\n" +"address." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"This dialog is used to choose which services you wish to start at boot\n" +"time.\n" +"\n" +"DrakX will list all the services available on the current installation.\n" +"Review each one carefully and uncheck those which are not needed at boot\n" +"time.\n" +"\n" +"A short explanatory text will be displayed about a service when it is\n" +"selected. However, if you are not sure whether a service is useful or not,\n" +"it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you will probably not want to start any services that you do not\n" +"need. Please remember that several services can be dangerous if they are\n" +"enabled on a server. In general, select only the services you really need.\n" +"!!" +msgstr "" +"This dialog is used to choose which services you wish to start at boot\n" +"time.\n" +"\n" +"DrakX will list all the services available on the current installation.\n" +"Review each one carefully and uncheck those which are not needed at boot\n" +"time.\n" +"\n" +"A short explanatory text will be displayed about a service when it is\n" +"selected. However, if you are not sure whether a service is useful or not,\n" +"it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you will probably not want to start any services that you do not\n" +"need. Please remember that several services can be dangerous if they are\n" +"enabled on a server. In general, select only the services you really need.\n" +"!!" + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Your choice of preferred language will affect the language of the\n" +"documentation, the installer and the system in general. Select first the\n" +"region you are located in, and then the language you speak.\n" +"\n" +"Clicking on the \"%s\" button will allow you to select other languages to\n" +"be installed on your workstation, thereby installing the language-specific\n" +"files for system documentation and applications. For example, if you will\n" +"host users from Spain on your machine, select English as the default\n" +"language in the tree view and \"%s\" in the Advanced section.\n" +"\n" +"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" +"cover all existing languages. Though full support for it in GNU/Linux is\n" +"still under development. For that reason, Mandrake Linux will be using it\n" +"or not depending on the user choices:\n" +"\n" +" * If you choose a languages with a strong legacy encoding (latin1\n" +"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" +"iso-8859-2 languages), the legacy encoding will be used by default;\n" +"\n" +" * Other languages will use unicode by default;\n" +"\n" +" * If two or more languages are required, and those languages are not using\n" +"the same encoding, then unicode will be used for the whole system;\n" +"\n" +" * Finally, unicode can also be forced for the system at user request by\n" +"selecting option \"%s\" independently of which language(s) have been\n" +"chosen.\n" +"\n" +"Note that you're not limited to choosing a single additional language. You\n" +"may choose several ones, or even install them all by selecting the \"%s\"\n" +"box. Selecting support for a language means translations, fonts, spell\n" +"checkers, etc. for that language will be installed.\n" +"\n" +"To switch between the various languages installed on the system, you can\n" +"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" +"language used by the entire system. Running the command as a regular user\n" +"will only change the language settings for that particular user." +msgstr "" +"Your choice of preferred language will affect the language of the\n" +"documentation, the installer and the system in general. Select first the\n" +"region you are located in, and then the language you speak.\n" +"\n" +"Clicking on the „%s“ button will allow you to select other languages to be\n" +"installed on your workstation, thereby installing the language-specific\n" +"files for system documentation and applications. For example, if you will\n" +"host users from Spain on your machine, select English as the default\n" +"language in the tree view and „%s“ in the Advanced section.\n" +"\n" +"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" +"cover all existing languages. Though full support for it in GNU/Linux is\n" +"still under development. For that reason, Mandrake Linux will be using it\n" +"or not depending on the user choices:\n" +"\n" +" * If you choose a languages with a strong legacy encoding (latin1\n" +"languages, Russian, Japanese, Chinese, Korean, Thaï, Greek, Turkish, most\n" +"iso-8859-2 languages), the legacy encoding will be used by default;\n" +"\n" +" * Other languages will use unicode by default;\n" +"\n" +" * If two or more languages are required, and those languages are not using\n" +"the same encoding, then unicode will be used for the whole system;\n" +"\n" +" * Finally, unicode can also be forced for the system at user request by\n" +"selecting option „%s“ independently of which language(s) have been chosen.\n" +"\n" +"Note that you're not limited to choosing a single additional language. You\n" +"may choose several ones, or even install them all by selecting the „%s“\n" +"box. Selecting support for a language means translations, fonts, spell\n" +"checkers, etc. for that language will be installed.\n" +"\n" +"To switch between the various languages installed on the system, you can\n" +"launch the „/usr/sbin/localedrake“ command as „root“ to change the language\n" +"used by the entire system. Running the command as a regular user will only\n" +"change the language settings for that particular user." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." +msgstr "" +"In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" +"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" +"detected and installed in the bootloader menu. If this is not the case, you\n" +"can add an entry by hand in this screen. Be careful to choose the correct\n" +"parameters.\n" +"\n" +"Yaboot's main options are:\n" +"\n" +" * Init Message: a simple text message displayed before the boot prompt.\n" +"\n" +" * Boot Device: indicates where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" +"to hold this information.\n" +"\n" +" * Open Firmware Delay: unlike LILO, there are two delays available with\n" +"yaboot. The first delay is measured in seconds and at this point, you can\n" +"choose between CD, OF boot, MacOS or Linux;\n" +"\n" +" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" +"After selecting Linux, you will have this delay in 0.1 second increments\n" +"before your default kernel description is selected;\n" +"\n" +" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" +"at the first boot prompt.\n" +"\n" +" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" +"Open Firmware at the first boot prompt.\n" +"\n" +" * Default OS: you can select which OS will boot by default when the Open\n" +"Firmware Delay expires." +msgstr "" +"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" +"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" +"detected and installed in the bootloader menu. If this is not the case, you\n" +"can add an entry by hand in this screen. Be careful to choose the correct\n" +"parameters.\n" +"\n" +"Yaboot's main options are:\n" +"\n" +" * Init Message: a simple text message displayed before the boot prompt.\n" +"\n" +" * Boot Device: indicates where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" +"to hold this information.\n" +"\n" +" * Open Firmware Delay: unlike LILO, there are two delays available with\n" +"yaboot. The first delay is measured in seconds and at this point, you can\n" +"choose between CD, OF boot, MacOS or Linux;\n" +"\n" +" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" +"After selecting Linux, you will have this delay in 0.1 second increments\n" +"before your default kernel description is selected;\n" +"\n" +" * Enable CD Boot?: checking this option allows you to choose „C“ for CD at\n" +"the first boot prompt.\n" +"\n" +" * Enable OF Boot?: checking this option allows you to choose „N“ for Open\n" +"Firmware at the first boot prompt.\n" +"\n" +" * Default OS: you can select which OS will boot by default when the Open\n" +"Firmware Delay expires." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" +"automated. DrakX will analyze the disk boot sector and act according to\n" +"what it finds there:\n" +"\n" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. This way you will be able to load either GNU/Linux or any\n" +"other OS installed on your machine.\n" +"\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" +"one.\n" +"\n" +"If it cannot make a determination, DrakX will ask you where to place the\n" +"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n" +"won't install any bootloader. Use it only if you know what you are doing." +msgstr "" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" +"automated. DrakX will analyze the disk boot sector and act according to\n" +"what it finds there:\n" +"\n" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. This way you will be able to load either GNU/Linux or any\n" +"other OS installed on your machine.\n" +"\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" +"one.\n" +"\n" +"If it cannot make a determination, DrakX will ask you where to place the\n" +"bootloader. Generally, the „%s“ is the safest place. Choosing „%s“ won't\n" +"install any bootloader. Use it only if you know what you are doing." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer." +msgstr "" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"At this point, you need to choose which partition(s) will be used for the\n" +"installation of your Mandrake Linux system. If partitions have already been\n" +"defined, either from a previous installation of GNU/Linux or by another\n" +"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" +"partitions must be defined.\n" +"\n" +"To create partitions, you must first select a hard drive. You can select\n" +"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" +"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" +"\n" +"To partition the selected hard drive, you can use these options:\n" +"\n" +" * \"%s\": this option deletes all partitions on the selected hard drive\n" +"\n" +" * \"%s\": this option enables you to automatically create ext3 and swap\n" +"partitions in the free space of your hard drive\n" +"\n" +"\"%s\": gives access to additional features:\n" +"\n" +" * \"%s\": saves the partition table to a floppy. Useful for later\n" +"partition-table recovery if necessary. It is strongly recommended that you\n" +"perform this step.\n" +"\n" +" * \"%s\": allows you to restore a previously saved partition table from a\n" +"floppy disk.\n" +"\n" +" * \"%s\": if your partition table is damaged, you can try to recover it\n" +"using this option. Please be careful and remember that it doesn't always\n" +"work.\n" +"\n" +" * \"%s\": discards all changes and reloads the partition table that was\n" +"originally on the hard drive.\n" +"\n" +" * \"%s\": un-checking this option will force users to manually mount and\n" +"unmount removable media such as floppies and CD-ROMs.\n" +"\n" +" * \"%s\": use this option if you wish to use a wizard to partition your\n" +"hard drive. This is recommended if you do not have a good understanding of\n" +"partitioning.\n" +"\n" +" * \"%s\": use this option to cancel your changes.\n" +"\n" +" * \"%s\": allows additional actions on partitions (type, options, format)\n" +"and gives more information about the hard drive.\n" +"\n" +" * \"%s\": when you are finished partitioning your hard drive, this will\n" +"save your changes back to disk.\n" +"\n" +"When defining the size of a partition, you can finely set the partition\n" +"size by using the Arrow keys of your keyboard.\n" +"\n" +"Note: you can reach any option using the keyboard. Navigate through the\n" +"partitions using [Tab] and the [Up/Down] arrows.\n" +"\n" +"When a partition is selected, you can use:\n" +"\n" +" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +"\n" +" * Ctrl-d to delete a partition\n" +"\n" +" * Ctrl-m to set the mount point\n" +"\n" +"To get information about the different file system types available, please\n" +"read the ext2FS chapter from the ``Reference Manual''.\n" +"\n" +"If you are installing on a PPC machine, you will want to create a small HFS\n" +"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" +"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" +"may find it a useful place to store a spare kernel and ramdisk images for\n" +"emergency boot situations." +msgstr "" +"At this point, you need to choose which partition(s) will be used for the\n" +"installation of your Mandrake Linux system. If partitions have already been\n" +"defined, either from a previous installation of GNU/Linux or by another\n" +"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" +"partitions must be defined.\n" +"\n" +"To create partitions, you must first select a hard drive. You can select\n" +"the disk for partitioning by clicking on „hda“ for the first IDE drive,\n" +"„hdb“ for the second, „sda“ for the first SCSI drive and so on.\n" +"\n" +"To partition the selected hard drive, you can use these options:\n" +"\n" +" * „%s“: this option deletes all partitions on the selected hard drive\n" +"\n" +" * „%s“: this option enables you to automatically create ext3 and swap\n" +"partitions in the free space of your hard drive\n" +"\n" +"„%s“: gives access to additional features:\n" +"\n" +" * „%s“: saves the partition table to a floppy. Useful for later\n" +"partition-table recovery if necessary. It is strongly recommended that you\n" +"perform this step.\n" +"\n" +" * „%s“: allows you to restore a previously saved partition table from a\n" +"floppy disk.\n" +"\n" +" * „%s“: if your partition table is damaged, you can try to recover it\n" +"using this option. Please be careful and remember that it doesn't always\n" +"work.\n" +"\n" +" * „%s“: discards all changes and reloads the partition table that was\n" +"originally on the hard drive.\n" +"\n" +" * „%s“: unchecking this option will force users to manually mount and\n" +"unmount removable media such as floppies and CD-ROMs.\n" +"\n" +" * „%s“: use this option if you wish to use a wizard to partition your hard\n" +"drive. This is recommended if you do not have a good understanding of\n" +"partitioning.\n" +"\n" +" * „%s“: use this option to cancel your changes.\n" +"\n" +" * „%s“: allows additional actions on partitions (type, options, format)\n" +"and gives more information about the hard drive.\n" +"\n" +" * „%s“: when you are finished partitioning your hard drive, this will save\n" +"your changes back to disk.\n" +"\n" +"When defining the size of a partition, you can finely set the partition\n" +"size by using the Arrow keys of your keyboard.\n" +"\n" +"Note: you can reach any option using the keyboard. Navigate through the\n" +"partitions using [Tab] and the [Up/Down] arrows.\n" +"\n" +"When a partition is selected, you can use:\n" +"\n" +" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +"\n" +" * Ctrl-d to delete a partition\n" +"\n" +" * Ctrl-m to set the mount point\n" +"\n" +"To get information about the different file system types available, please\n" +"read the ext2FS chapter from the „Referenz“.\n" +"\n" +"If you are installing on a PPC machine, you will want to create a small HFS\n" +"„bootstrap“ partition of at least 1MB which will be used by the yaboot\n" +"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" +"may find it a useful place to store a spare kernel and ramdisk images for\n" +"emergency boot situations." + +# DO NOT BOTHER TO MODIFY HERE, SEE: +# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml +msgid "" +"As a review, DrakX will present a summary of information it has about your\n" +"system. Depending on your installed hardware, you may have some or all of\n" +"the following entries. Each entry is made up of the configuration item to\n" +"be configured, followed by a quick summary of the current configuration.\n" +"Click on the corresponding \"%s\" button to change that.\n" +"\n" +" * \"%s\": check the current keyboard map configuration and change that if\n" +"necessary.\n" +"\n" +" * \"%s\": check the current country selection. If you are not in this\n" +"country, click on the \"%s\" button and choose another one. If your country\n" +"is not in the first list shown, click the \"%s\" button to get the complete\n" +"country list.\n" +"\n" +" * \"%s\": By default, DrakX deduces your time zone based on the country\n" +"you have chosen. You can click on the \"%s\" button here if this is not\n" +"correct.\n" +"\n" +" * \"%s\": check the current mouse configuration and click on the button to\n" +"change it if necessary.\n" +"\n" +" * \"%s\": clicking on the \"%s\" button will open the printer\n" +"configuration wizard. Consult the corresponding chapter of the ``Starter\n" +"Guide'' for more information on how to setup a new printer. The interface\n" +"presented there is similar to the one used during installation.\n" +"\n" +" * \"%s\": if a sound card is detected on your system, it is displayed\n" +"here. If you notice the sound card displayed is not the one that is\n" +"actually present on your system, you can click on the button and choose\n" +"another driver.\n" +"\n" +" * \"%s\": by default, DrakX configures your graphical interface in\n" +"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" +"\"%s\" to reconfigure your graphical interface.\n" +"\n" +" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" +"If you have a TV card and it is not detected, click on \"%s\" to try to\n" +"configure it manually.\n" +"\n" +" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" +"here. You can click on \"%s\" to change the parameters associated with the\n" +"card.\n" +"\n" +" * \"%s\": If you wish to configure your Internet or local network access\n" +"now.\n" +"\n" +" * \"%s\": this entry allows you to redefine the security level as set in a\n" +"previous step ().\n" +"\n" +" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" +"idea to protect yourself from intrusions by setting up a firewall. Consult\n" +"the corresponding section of the ``Starter Guide'' for details about\n" +"firewall settings.\n" +"\n" +" * \"%s\": if you wish to change your bootloader configuration, click that\n" +"button. This should be reserved to advanced users.\n" +"\n" +" * \"%s\": here you'll be able to fine control which services will be run\n" +"on your machine. If you plan to use this machine as a server it's a good\n" +"idea to review this setup." +msgstr "" +"As a review, DrakX will present a summary of information it has about your\n" +"system. Depending on your installed hardware, you may have some or all of\n" +"the following entries. Each entry is made up of the configuration item to\n" +"be configured, followed by a quick summary of the current configuration.\n" +"Click on the corresponding „%s“ button to change that.\n" +"\n" +" * „%s“: check the current keyboard map configuration and change that if\n" +"necessary.\n" +"\n" +" * „%s“: check the current country selection. If you are not in this\n" +"country, click on the „%s“ button and choose another one. If your country\n" +"is not in the first list shown, click the „%s“ button to get the complete\n" +"country list.\n" +"\n" +" * „%s“: By default, DrakX deduces your time zone based on the country you\n" +"have chosen. You can click on the „%s“ button here if this is not correct.\n" +"\n" +" * „%s“: check the current mouse configuration and click on the button to\n" +"change it if necessary.\n" +"\n" +" * „%s“: clicking on the „%s“ button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the „Starter Handbuch“ for\n" +"more information on how to setup a new printer. The interface presented\n" +"there is similar to the one used during installation.\n" +"\n" +" * „%s“: if a sound card is detected on your system, it is displayed here.\n" +"If you notice the sound card displayed is not the one that is actually\n" +"present on your system, you can click on the button and choose another\n" +"driver.\n" +"\n" +" * „%s“: by default, DrakX configures your graphical interface in „800x600“\n" +"or „1024x768“ resolution. If that does not suit you, click on „%s“ to\n" +"reconfigure your graphical interface.\n" +"\n" +" * „%s“: if a TV card is detected on your system, it is displayed here. If\n" +"you have a TV card and it is not detected, click on „%s“ to try to\n" +"configure it manually.\n" +"\n" +" * „%s“: if an ISDN card is detected on your system, it will be displayed\n" +"here. You can click on „%s“ to change the parameters associated with the\n" +"card.\n" +"\n" +" * „%s“: If you wish to configure your Internet or local network access\n" +"now.\n" +"\n" +" * „%s“: this entry allows you to redefine the security level as set in a\n" +"previous step ().\n" +"\n" +" * „%s“: if you plan to connect your machine to the Internet, it's a good\n" +"idea to protect yourself from intrusions by setting up a firewall. Consult\n" +"the corresponding section of the „Starter Handbuch“ for details about\n" +"firewall settings.\n" +"\n" +" * „%s“: if you wish to change your bootloader configuration, click that\n" +"button. This should be reserved to advanced users.\n" +"\n" +" * „%s“: here you'll be able to fine control which services will be run on\n" +"your machine. If you plan to use this machine as a server it's a good idea\n" +"to review this setup." + |