summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/el.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/el.po')
-rw-r--r--perl-install/share/po/el.po4017
1 files changed, 4017 insertions, 0 deletions
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
new file mode 100644
index 000000000..370b53827
--- /dev/null
+++ b/perl-install/share/po/el.po
@@ -0,0 +1,4017 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (c) 1999 MandrakeSoft
+# FIRST AUTHOR Theodore J. Soldatos <theodore@eexi.gr>, 1999.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: DrakX VERSION\n"
+"POT-Creation-Date: 2000-01-10 01:09+0100\n"
+"PO-Revision-Date: 2000-1-4 16:27+0100\n"
+"Last-Translator: Theodore J. Soldatos <theodore@eexi.gr>\n"
+"Language-Team: GREEK <nls@tux.hellug.gr>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-7\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Graphic card"
+msgstr "����� ��������"
+
+#: ../Xconfigurator.pm_.c:159
+msgid "Select a graphic card"
+msgstr "�������� ����� ��������"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "Choose a X server"
+msgstr "�������� X server (������ ������ ��������)"
+
+#: ../Xconfigurator.pm_.c:160
+msgid "X server"
+msgstr "������������ X Window"
+
+#: ../Xconfigurator.pm_.c:181
+msgid "Select the memory size of your graphic card"
+msgstr "������� ������ ������ ��������"
+
+#: ../Xconfigurator.pm_.c:203
+msgid "Choose options for server"
+msgstr "��������� X server"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Choose a monitor"
+msgstr "�������� �����"
+
+#: ../Xconfigurator.pm_.c:221
+msgid "Monitor"
+msgstr "�����"
+
+#: ../Xconfigurator.pm_.c:224
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"�� ��� �������� ���������� ����� � ��������� ����������� ���������, ������ "
+"�����\n"
+"��������� �� ��� ����� ����������� �������� � �����, ����� ��� � ���������\n"
+"���������� ���������, � ����� ����� � ��������� �� ��� ����� ������������\n"
+"�� ���������� �������.\n"
+"\n"
+"����� ���� ��������� �� ��� ��������� ���� ������ ��� ������ �� ����������\n"
+"��������� ����� ����� ��� ����� ��� ������ ���: ������� �������� "
+"�����������\n"
+"��� ������ ���. �� ��� ����� ��������, ����� ��� ����������� �������."
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Horizontal refresh rate"
+msgstr "��������� ���������� ���������"
+
+#: ../Xconfigurator.pm_.c:231
+msgid "Vertical refresh rate"
+msgstr "��������� ����������� ���������"
+
+#: ../Xconfigurator.pm_.c:272
+msgid "Monitor not configured"
+msgstr "� ����� ��� ���� ��������� �����"
+
+#: ../Xconfigurator.pm_.c:275
+msgid "Graphic card not configured yet"
+msgstr "� ����� �������� ��� ���� ��������� �����"
+
+#: ../Xconfigurator.pm_.c:278
+msgid "Resolutions not chosen yet"
+msgstr "��� ����� �������� ��������� �����"
+
+#: ../Xconfigurator.pm_.c:289
+msgid "Do you want to test the configuration?"
+msgstr "������ �� ���������� ��� ���������;"
+
+#: ../Xconfigurator.pm_.c:293
+msgid "Warning: testing is dangerous on this graphic card"
+msgstr "�������: � ������ ����� ��������� �� ���� ��� ����� ��������"
+
+#: ../Xconfigurator.pm_.c:296
+msgid "Test configuration"
+msgstr "������ ���������"
+
+#: ../Xconfigurator.pm_.c:334
+msgid "An error occurred:"
+msgstr "���������� ������:"
+
+#: ../Xconfigurator.pm_.c:336
+msgid ""
+"\n"
+"try changing some parameters"
+msgstr ""
+"\n"
+"��������� �� �������� ������� �����������"
+
+#: ../Xconfigurator.pm_.c:358
+#, c-format
+msgid "(leaving in %d seconds)"
+msgstr "(������ �� %d ������������)"
+
+#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
+msgid "Is this correct?"
+msgstr "�����;"
+
+#: ../Xconfigurator.pm_.c:370
+msgid "An error occurred, try changing some parameters"
+msgstr "���������� ������, ��������� �� �������� ������� �����������"
+
+#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
+msgid "Automatic resolutions"
+msgstr "�������� ������� ���������"
+
+#: ../Xconfigurator.pm_.c:379
+msgid ""
+"To find the available resolutions I will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+"�� �������� �������� ��������� ��� �� �������� ����� ����� ����������.\n"
+"� ����� ��� �� ������� �� �����������...\n"
+"�������� �� ������ �� ��� ��������, �� �������� ��� ���� �� ���\n"
+"���������� ��� �����������."
+
+#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
+msgid "Resolution"
+msgstr "�������"
+
+#: ../Xconfigurator.pm_.c:469
+msgid "Choose resolution and color depth"
+msgstr "�������� ������� ��� ����� ��������"
+
+#: ../Xconfigurator.pm_.c:477
+msgid "Show all"
+msgstr "�������� ����"
+
+#: ../Xconfigurator.pm_.c:501
+msgid "Resolutions"
+msgstr "���������"
+
+#: ../Xconfigurator.pm_.c:548
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Sometimes, though, it may hang the machine.\n"
+"Do you want to try?"
+msgstr ""
+"����� �� �������� �� ��� ��� ���������� ��������� (�� 800�600).\n"
+"���� ���� ���� ���������� ������� ��� ����������.\n"
+"������ �� ����������;"
+
+#: ../Xconfigurator.pm_.c:553
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+"��� �������� ������� ���������� �����������\n"
+"��������� ����������� ����� �������� � �����"
+
+#: ../Xconfigurator.pm_.c:772
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "���������� �������������: %s\n"
+
+#: ../Xconfigurator.pm_.c:773
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr "����� ���������: %s\n"
+
+#: ../Xconfigurator.pm_.c:774
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "������� ���������: %s\n"
+
+#: ../Xconfigurator.pm_.c:775
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "�����: %s\n"
+
+#: ../Xconfigurator.pm_.c:776
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "��������� ���������� ���������: %s\n"
+
+#: ../Xconfigurator.pm_.c:777
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "��������� ����������� ���������: %s\n"
+
+#: ../Xconfigurator.pm_.c:778
+#, c-format
+msgid "Graphic card: %s\n"
+msgstr "����� ��������: %s\n"
+
+#: ../Xconfigurator.pm_.c:779
+#, c-format
+msgid "Graphic memory: %s kB\n"
+msgstr "����� ������ ��������: %s kb\n"
+
+#: ../Xconfigurator.pm_.c:780
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
+
+#: ../Xconfigurator.pm_.c:794
+msgid "Preparing X-Window configuration"
+msgstr "������������ ��������� �������� ������������� (X-Window)"
+
+#: ../Xconfigurator.pm_.c:808
+msgid "Change Monitor"
+msgstr "������ ������"
+
+#: ../Xconfigurator.pm_.c:809
+msgid "Change Graphic card"
+msgstr "������ ������ ��������"
+
+#: ../Xconfigurator.pm_.c:810
+msgid "Change Server options"
+msgstr "������ ��������� X server"
+
+#: ../Xconfigurator.pm_.c:811
+msgid "Change Resolution"
+msgstr "������ ��������"
+
+#: ../Xconfigurator.pm_.c:812
+msgid "Automatical resolutions search"
+msgstr "�������� ������ ���������"
+
+#: ../Xconfigurator.pm_.c:816
+msgid "Show information"
+msgstr "������� �����������"
+
+#: ../Xconfigurator.pm_.c:817
+msgid "Test again"
+msgstr "��������� �������"
+
+#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
+msgid "Quit"
+msgstr "������"
+
+#: ../Xconfigurator.pm_.c:822
+msgid "What do you want to do?"
+msgstr "�� ������ �� ������;"
+
+#: ../Xconfigurator.pm_.c:829
+msgid "Forget the changes?"
+msgstr "������� �������;"
+
+#: ../Xconfigurator.pm_.c:845
+#, c-format
+msgid "Please relog into %s to activate the changes"
+msgstr "�������� ��������������� �� %s ��� ������������ ��� �������"
+
+#: ../Xconfigurator.pm_.c:861
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "�������� ������������� ��� ���� ������� Ctrl-Alt-BackSpace"
+
+#: ../Xconfigurator.pm_.c:864
+msgid "X at startup"
+msgstr "������� ���������� (X) ���� ��������"
+
+#: ../Xconfigurator.pm_.c:865
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+"����� �� ������� �� ������� ��� ���� ���� �� �������� �������� ��\n"
+"������� ���������� (X-Windows).\n"
+"���������� �������� �������� �������� �������������;"
+
+#: ../Xconfigurator_consts.pm_.c:4
+msgid "256 colors (8 bits)"
+msgstr "256 ������� (8 bits)"
+
+#: ../Xconfigurator_consts.pm_.c:5
+msgid "32 thousand colors (15 bits)"
+msgstr "32 �������� ������� (15 bits)"
+
+#: ../Xconfigurator_consts.pm_.c:6
+msgid "65 thousand colors (16 bits)"
+msgstr "65 �������� ������� (16 bits)"
+
+#: ../Xconfigurator_consts.pm_.c:7
+msgid "16 million colors (24 bits)"
+msgstr "16 ����������� ������� (24 bits)"
+
+#: ../Xconfigurator_consts.pm_.c:8
+msgid "4 billion colors (32 bits)"
+msgstr "4 �������������� ������� (32 bits)"
+
+#: ../Xconfigurator_consts.pm_.c:96
+msgid "256 kB"
+msgstr "256 kb"
+
+#: ../Xconfigurator_consts.pm_.c:97
+msgid "512 kB"
+msgstr "512 kb"
+
+#: ../Xconfigurator_consts.pm_.c:98
+msgid "1 MB"
+msgstr "1 MB"
+
+#: ../Xconfigurator_consts.pm_.c:99
+msgid "2 MB"
+msgstr "2 MB"
+
+#: ../Xconfigurator_consts.pm_.c:100
+msgid "4 MB"
+msgstr "4 MB"
+
+#: ../Xconfigurator_consts.pm_.c:101
+msgid "8 MB"
+msgstr "8 MB"
+
+#: ../Xconfigurator_consts.pm_.c:102
+msgid "16 MB or more"
+msgstr "16 MB � �����������"
+
+#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
+msgid "Standard VGA, 640x480 at 60 Hz"
+msgstr "Standard VGA, 640x480 ��� 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:109
+msgid "Super VGA, 800x600 at 56 Hz"
+msgstr "Super VGA, 800x600 ��� 56 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:110
+msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
+msgstr "8514 Compatible, 1024x768 ��� 87 Hz interlaced (no 800x600)"
+
+#: ../Xconfigurator_consts.pm_.c:111
+msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
+msgstr "Super VGA, 1024x768 ��� 87 Hz interlaced, 800x600 ��� 56 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:112
+msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
+msgstr "Extended Super VGA, 800x600 ��� 60 Hz, 640x480 ��� 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:113
+msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
+msgstr "Non-Interlaced SVGA, 1024x768 ��� 60 Hz, 800x600 ��� 72 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:114
+msgid "High Frequency SVGA, 1024x768 at 70 Hz"
+msgstr "High Frequency SVGA, 1024x768 ��� 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:115
+msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
+msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 60 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:116
+msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
+msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 74 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:117
+msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
+msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 76 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:118
+msgid "Monitor that can do 1600x1200 at 70 Hz"
+msgstr "����� ��� ������ �� ����������� ������� 1600x1200 ��� 70 Hz"
+
+#: ../Xconfigurator_consts.pm_.c:119
+msgid "Monitor that can do 1600x1200 at 76 Hz"
+msgstr "����� ��� ������ �� ����������� ������� 1600x1200 ��� 76 Hz"
+
+#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
+msgid "Create"
+msgstr "����������"
+
+#: ../diskdrake.pm_.c:17
+msgid "Unmount"
+msgstr "����������"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
+msgid "Delete"
+msgstr "��������"
+
+#: ../diskdrake.pm_.c:18
+msgid "Format"
+msgstr "�����������"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
+msgid "Resize"
+msgstr "������ ��������"
+
+#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
+msgid "Type"
+msgstr "�����"
+
+#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
+msgid "Mount point"
+msgstr "������ ��������"
+
+#: ../diskdrake.pm_.c:33
+msgid "Write /etc/fstab"
+msgstr "���������� /etc/fstab"
+
+#: ../diskdrake.pm_.c:34
+msgid "Toggle to expert mode"
+msgstr "���������� �� ����������� ����� �����������"
+
+#: ../diskdrake.pm_.c:35
+msgid "Toggle to normal mode"
+msgstr "���������� �� �������� ����� �����������"
+
+#: ../diskdrake.pm_.c:36
+msgid "Restore from file"
+msgstr "��������� ��� ������"
+
+#: ../diskdrake.pm_.c:37
+msgid "Save in file"
+msgstr "���������� �� ������"
+
+#: ../diskdrake.pm_.c:38
+msgid "Restore from floppy"
+msgstr "��������� ��� ��������"
+
+#: ../diskdrake.pm_.c:39
+msgid "Save on floppy"
+msgstr "���������� �� ��������"
+
+#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
+#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
+msgid "Done"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:43
+msgid "Clear all"
+msgstr "���������� ����"
+
+#: ../diskdrake.pm_.c:44
+msgid "Format all"
+msgstr "����������� ����"
+
+#: ../diskdrake.pm_.c:45
+msgid "Auto allocate"
+msgstr "�������� ��������"
+
+#: ../diskdrake.pm_.c:48
+msgid "All primary partitions are used"
+msgstr "���� �� ����������� ����������� ����� �� �����"
+
+#: ../diskdrake.pm_.c:48
+msgid "I can't add any more partition"
+msgstr "��� ����� �� �������� �����������"
+
+#: ../diskdrake.pm_.c:48
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"��� �� ���������� �����������, �������� ��������� ��� ���� ������ ����� "
+"������ � �������� ����������� ����������"
+
+#: ../diskdrake.pm_.c:51
+#, fuzzy
+msgid "Rescue partition table"
+msgstr "���������� ������ �����������"
+
+#: ../diskdrake.pm_.c:52
+msgid "Undo"
+msgstr "������� ���������� ������"
+
+#: ../diskdrake.pm_.c:53
+msgid "Write partition table"
+msgstr "���������� ������ �����������"
+
+#: ../diskdrake.pm_.c:54
+msgid "Reload"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:98
+msgid "Empty"
+msgstr "�����"
+
+#: ../diskdrake.pm_.c:98
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../diskdrake.pm_.c:98
+msgid "FAT"
+msgstr "FAT"
+
+#: ../diskdrake.pm_.c:98
+msgid "Other"
+msgstr "����"
+
+#: ../diskdrake.pm_.c:98
+msgid "Swap"
+msgstr "Swap"
+
+#: ../diskdrake.pm_.c:104
+msgid "Filesystem types:"
+msgstr "����� ���������� �������:"
+
+#: ../diskdrake.pm_.c:113
+msgid "Details"
+msgstr "������������"
+
+#: ../diskdrake.pm_.c:127
+msgid ""
+"You have one big fat partition\n"
+"(generally use by MicroSoft Dos/Windows).\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"����� ��� ������ FAT ���������\n"
+"(������� ���������������� ��� Dos � Windows).\n"
+"������� �� �������� �� ������� ��� �����\n"
+"(�������� ���, ���� �������� \"������ ��������\")"
+
+#: ../diskdrake.pm_.c:132
+msgid "Please make a backup of your data first"
+msgstr "�������� ����� ����� ��� ��������� ��������� ��� ��������� ���"
+
+#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
+#: ../diskdrake.pm_.c:487
+msgid "Read carefully!"
+msgstr "�������� ����������!"
+
+#: ../diskdrake.pm_.c:146
+#, c-format
+msgid "After %s partition %s,"
+msgstr "���� %s ��������� %s,"
+
+#: ../diskdrake.pm_.c:146
+msgid "all data on this partition will be lost"
+msgstr "��� �� �������� �� ����� ��� ��������� �� ������"
+
+#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
+#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
+#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
+msgid "Error"
+msgstr "������"
+
+#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
+msgid "Mount point: "
+msgstr "������ ��������: "
+
+#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
+msgid "Device: "
+msgstr "�������: "
+
+#: ../diskdrake.pm_.c:191
+#, c-format
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "������ DOS ������ ������: %s \n"
+
+#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
+msgid "Type: "
+msgstr "�����: "
+
+#: ../diskdrake.pm_.c:193
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "����: ������ %s\n"
+
+#: ../diskdrake.pm_.c:194
+#, c-format
+msgid "Size: %s MB"
+msgstr "�������: %s MB"
+
+#: ../diskdrake.pm_.c:196
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s ������"
+
+#: ../diskdrake.pm_.c:198
+#, c-format
+msgid "Cylinder %d to cylinder %d\n"
+msgstr "��������� %d ��� ��������� %d\n"
+
+#: ../diskdrake.pm_.c:199
+msgid "Formatted\n"
+msgstr "��������������\n"
+
+#: ../diskdrake.pm_.c:200
+msgid "Not formatted\n"
+msgstr "�������������\n"
+
+#: ../diskdrake.pm_.c:201
+msgid "Mounted\n"
+msgstr "������������\n"
+
+#: ../diskdrake.pm_.c:202
+#, c-format
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
+
+#: ../diskdrake.pm_.c:203
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"��������� ��������� �� �������\n"
+" (��� MS-DOS, ��� ��� lilo)\n"
+
+#: ../diskdrake.pm_.c:205
+#, c-format
+msgid "Level %s\n"
+msgstr "������� %s\n"
+
+#: ../diskdrake.pm_.c:206
+#, c-format
+msgid "Chunk size %s\n"
+msgstr "������� chunk %s\n"
+
+#: ../diskdrake.pm_.c:207
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "������ RAID %s\n"
+
+#: ../diskdrake.pm_.c:224
+msgid "Please click on a partition"
+msgstr "�������� ����� ���� �� ��� ���������"
+
+#: ../diskdrake.pm_.c:229
+#, c-format
+msgid "Size: %d MB\n"
+msgstr "�������: %d MB\n"
+
+#: ../diskdrake.pm_.c:230
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "���������: %s ���������, %s �������, %s ������\n"
+
+#: ../diskdrake.pm_.c:232
+#, c-format
+msgid "on bus %d id %d\n"
+msgstr "��� bus %d id %d\n"
+
+#: ../diskdrake.pm_.c:245
+msgid "Mount"
+msgstr "�������"
+
+#: ../diskdrake.pm_.c:246
+msgid "Active"
+msgstr "������"
+
+#: ../diskdrake.pm_.c:247
+msgid "Add to RAID"
+msgstr "�������� ��� RAID"
+
+#: ../diskdrake.pm_.c:248
+msgid "Remove from RAID"
+msgstr "�������� ��� �� RAID"
+
+#: ../diskdrake.pm_.c:249
+msgid "Modify RAID"
+msgstr "����������� RAID"
+
+#: ../diskdrake.pm_.c:256
+msgid "Choose action"
+msgstr "�������� �����"
+
+#: ../diskdrake.pm_.c:349
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use LILO and it won't work, or you don't use LILO and you don't "
+"need /boot"
+msgstr ""
+"��������, ���� ��� ����� �� ����������� ��� �������� /boot �� �������� "
+"���������� ��� 1024.\n"
+"���� �������������� LILO ��� ��� �� ��������, ���� ��� ��������������LILO "
+"��� ��� ���������� �� /boot"
+
+#: ../diskdrake.pm_.c:353
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the LILO boot manager, be careful to add a /boot partition"
+msgstr ""
+"� ��������� ��� ��������� �� root (/) ��������� ���� ��� �������� 1024 ���\n"
+"��� ����� ��������� /boot.\n"
+"�� ��������� �� ��������������� LILO, ��������� ��� ��������� /boot."
+
+#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "�������������� ``%s'' ��� ���� ���"
+
+#: ../diskdrake.pm_.c:375
+msgid "Use ``Unmount'' first"
+msgstr "����� ����� ``����������''"
+
+#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
+msgid "changing type of"
+msgstr "������ ����� ���"
+
+#: ../diskdrake.pm_.c:388
+msgid "Continue anyway?"
+msgstr "�� ��������;"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without saving"
+msgstr "������ ����� ����������"
+
+#: ../diskdrake.pm_.c:393
+msgid "Quit without writing the partition table?"
+msgstr "������ ����� ���������� ��� ������ �����������;"
+
+#: ../diskdrake.pm_.c:412
+msgid "Change partition type"
+msgstr "������ ����� ����������"
+
+#: ../diskdrake.pm_.c:413
+msgid "Which partition type do you want?"
+msgstr "�� ���� ���������� ������;"
+
+#: ../diskdrake.pm_.c:429
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "��� ������ �� ��������� ��� ������� %s;"
+
+#: ../diskdrake.pm_.c:451
+msgid "formatting"
+msgstr "�����������"
+
+#: ../diskdrake.pm_.c:453
+msgid "Formatting"
+msgstr "�����������"
+
+#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
+#, c-format
+msgid "Formatting partition %s"
+msgstr "����������� ���������� %s"
+
+#: ../diskdrake.pm_.c:458
+msgid "After formatting all partitions,"
+msgstr "���� ��� ����������� ���� ��� �����������,"
+
+#: ../diskdrake.pm_.c:458
+msgid "all data on these partitions will be lost"
+msgstr "��� �� �������� �� ����� ��� ����������� �� ������"
+
+#: ../diskdrake.pm_.c:468
+msgid "Move"
+msgstr "����������"
+
+#: ../diskdrake.pm_.c:469
+msgid "Which disk do you want to move to?"
+msgstr "�� ����� ����� ������ �� �������������;"
+
+#: ../diskdrake.pm_.c:473
+msgid "Sector"
+msgstr "������"
+
+#: ../diskdrake.pm_.c:474
+msgid "Which sector do you want to move to?"
+msgstr "�� ����� ����� ������ �� �������������;"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving"
+msgstr "���������� �� �������"
+
+#: ../diskdrake.pm_.c:477
+msgid "Moving partition..."
+msgstr "���������� ���������� �� �������..."
+
+#: ../diskdrake.pm_.c:487
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "� ������� ����������� ��� ������ %s �� ����������� ���� �����!"
+
+#: ../diskdrake.pm_.c:489
+msgid "You'll need to reboot before the modification can take place"
+msgstr "���������� ������������ ��� �� ����������� �� �������"
+
+#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
+msgid "Computing fat filesystem bounds"
+msgstr "����������� fat filesystem bounds"
+
+#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
+#: ../install_steps_gtk.pm_.c:255
+msgid "Resizing"
+msgstr "�������� ��������"
+
+#: ../diskdrake.pm_.c:524
+msgid "resizing"
+msgstr "�������� ��������"
+
+#: ../diskdrake.pm_.c:534
+msgid "Choose the new size"
+msgstr "�������� �� ��� �������"
+
+#: ../diskdrake.pm_.c:534 ../install_steps_gtk.pm_.c:317
+#: ../install_steps_gtk.pm_.c:361
+msgid "MB"
+msgstr "MB"
+
+#: ../diskdrake.pm_.c:587
+msgid "Create a new partition"
+msgstr "���������� ���� ����������"
+
+#: ../diskdrake.pm_.c:603
+msgid "Start sector: "
+msgstr "���� ���� �����: "
+
+#: ../diskdrake.pm_.c:606
+msgid "Size in MB: "
+msgstr "������� �� MB"
+
+#: ../diskdrake.pm_.c:609
+msgid "Filesystem type: "
+msgstr "����� ���������� �������: "
+
+#: ../diskdrake.pm_.c:611
+msgid "Preference: "
+msgstr "���������: "
+
+#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
+msgid "Select file"
+msgstr "�������� ������"
+
+#: ../diskdrake.pm_.c:664
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"� ��������� ������� ����������� ���� ����������� �������\n"
+"�� ��������;"
+
+#: ../diskdrake.pm_.c:672
+msgid "Warning"
+msgstr "�������������"
+
+#: ../diskdrake.pm_.c:673
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"�������� ��� �������� ���� ����� ���������\n"
+"��� �� �������� �� ���� �� �������� �� ������"
+
+#: ../diskdrake.pm_.c:687
+msgid "Trying to rescue partition table"
+msgstr "���������� �������� ������ �����������"
+
+#: ../diskdrake.pm_.c:698
+msgid "device"
+msgstr "�������"
+
+#: ../diskdrake.pm_.c:699
+msgid "level"
+msgstr "�������"
+
+#: ../diskdrake.pm_.c:700
+msgid "chunk size"
+msgstr "������� chunk"
+
+#: ../diskdrake.pm_.c:712
+msgid "Choose an existing RAID to add to"
+msgstr "�������� ��� ������� RAID ��� ����� �� ����� � ��������"
+
+#: ../diskdrake.pm_.c:713
+msgid "new"
+msgstr "���"
+
+#: ../fs.pm_.c:67 ../fs.pm_.c:73
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "%s ����������� ��� %s �������"
+
+#: ../fs.pm_.c:93
+#, c-format
+msgid "don't know how to format %s in type %s"
+msgstr "��� ���� ��� �� ����������� �� %s �� ���� %s"
+
+#: ../fs.pm_.c:106
+msgid "nfs mount failed"
+msgstr "������� nfs �������"
+
+#: ../fs.pm_.c:123
+msgid "mount failed: "
+msgstr "������� �������: "
+
+#: ../fs.pm_.c:134
+#, c-format
+msgid "error unmounting %s: %s"
+msgstr "������ ���� ��� ���������� ��� %s: %s"
+
+#: ../fsedit.pm_.c:219
+msgid "Mount points must begin with a leading /"
+msgstr "�� ������ �������� ������ �� �������� �� /"
+
+#: ../fsedit.pm_.c:222
+#, c-format
+msgid "There is already a partition with mount point %s"
+msgstr "������� ��� ��������� �� ������ �������� %s"
+
+#: ../fsedit.pm_.c:306
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "������ ���� �� ������� ��� %s ��� �������: %s"
+
+#: ../fsedit.pm_.c:388
+msgid ""
+"An error has occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"���������� ������ - ��� �������� �������� ���� ������ �� ����� ������� "
+"���������� ���� ���������� �������. �������� ������� �� ����� ��� ������ "
+"����� ����� ��� �����������"
+
+#: ../fsedit.pm_.c:403
+msgid "You don't have any partitions!"
+msgstr "��� ������� ����� ���������!"
+
+#: ../help.pm_.c:7
+msgid "Choose preferred language for install and system usage."
+msgstr "�������� ������ ��� ����������� ��� �����."
+
+#: ../help.pm_.c:10
+msgid "Choose the layout corresponding to your keyboard from the list above"
+msgstr ""
+"�������� ��� ���������� ��� ����������� ��� ������������ ������ ��� �������� "
+"�����"
+
+#: ../help.pm_.c:13
+msgid ""
+"Choose \"Install\" if there are no previous versions of Linux\n"
+"installed, or if you wish to use multiple distributions or versions.\n"
+"\n"
+"\n"
+"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
+"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
+"(Helios) or Gold 2000."
+msgstr ""
+"�������� \"�����������\" ��� ��� ������� ���������� ����������� Linux\n"
+"��� ������� ���, � ��� ������ �� ��������������� ��������� �������������.\n"
+"\n"
+"\n"
+"�������� \"����������\" ��� ������ �� ������������ ��� ���������\n"
+"����������� ��� Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo),\n"
+"5.3 (Festen), 6.0 (Venus), 6.1 (Helios) or Gold 2000."
+
+#: ../help.pm_.c:22
+msgid ""
+"Select:\n"
+"\n"
+" - Recommended: If you have never installed Linux before.\n"
+"\n"
+"\n"
+" - Customized: If you are familiar with Linux, you will be able to \n"
+"select the usage for the installed system between normal, development or\n"
+"server. Choose \"Normal\" for a general purpose installation of your\n"
+"computer. You may choose \"Development\" if you will be using the computer\n"
+"primarily for software development, or choose \"Server\" if you wish to\n"
+"install a general purpose server (for mail, printing...).\n"
+"\n"
+"\n"
+" - Expert: If you are fluent with GNU/Linux and want to perform\n"
+"a highly customized installation, this Install Class is for you. You will\n"
+"be able to select the usage of your installed system as for \"Customized\"."
+msgstr ""
+"��������:\n"
+"\n"
+" - �����������: ��� ���� ����� � ����� ���� ��� ����������� Linux.\n"
+"\n"
+"\n"
+" - �������������: ��� ����� ������������� �� �� Linux, �� ��������� �� \n"
+"��������� ������ ���������� ������� ������, ���������� ��������� � "
+"�����������\n"
+"�������.\n"
+"\n"
+"\n"
+" - �������������: ��� ����� ���� ������������� �� ��������� GNU/Linux ���\n"
+"������ �� ���������������� ��� ���������� ������������� �����������, ����\n"
+"���� � ������� ����� ��� ���. �� ��������� �� ��������� ���� ������������\n"
+"���� ��� ���� �������� (\"�������������\") �������."
+
+#: ../help.pm_.c:40
+msgid ""
+"DrakX will attempt at first to look for one or more PCI\n"
+"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
+"to use, it will insert it (them) automatically.\n"
+"\n"
+"\n"
+"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
+"doesn't know which driver to use for this card, or if you have no\n"
+"SCSI adapters at all, you will then be prompted on whether you have\n"
+"one or not. If you have none, answer \"No\". If you have one or more,\n"
+"answer \"Yes\". A list of drivers will then pop up, from which you\n"
+"will have to select one.\n"
+"\n"
+"\n"
+"After you have selected the driver, DrakX will ask if you\n"
+"want to specify options for it. First, try and let the driver\n"
+"probe for the hardware: it usually works fine.\n"
+"\n"
+"\n"
+"If not, do not forget the information on your hardware that you\n"
+"could get from your documentation or from Windows (if you have it\n"
+"on your system), as suggested by the installation guide. These\n"
+"are the options you will need to provide to the driver."
+msgstr ""
+"�� DrakX �� ����������� ���' ����� �� ��������� ���� � �������������\n"
+"PCI ������������ SCSI. ��� ��������� ������� � �������� ��� �����\n"
+"������ ������� �� ��������������, �� �� ����� ��������.\n"
+"\n"
+"\n"
+"��� � SCSI ������������ ��� ����� ISA � ������� PCI ��� ��� �����\n"
+"������� ��� DrakX, � ��� ��� ����� ������������� ����������� SCSI,\n"
+"�� ���������� ��� ����� ������� �����������. ��� ��� �����, ���������\n"
+"\"���\". ��� �����, ��������� \"���\". �� ���������� ���� ���������\n"
+"�� �������, ��� ��� ������ �� ������ �� ��������� ��� ���������.\n"
+"\n"
+"\n"
+"���� ��� ������� ������, �� Dra�� �� ��� ������� ��� ������ �� �������\n"
+"��������� ��� ��� �����. ���' �����, ������ ��� ����� �� ������������\n"
+"����� ��� ��� ���������� ���������. ���� ������� ���� �� ���������\n"
+"����������.\n"
+"\n"
+"\n"
+"��� ���� ��� ������, �������������� ��� ��������� ��� �����������\n"
+"���� ���������� ��� ������ ��� � ����� ��� ������� ��� Windows \n"
+"(��� ���� ����� ������������� ���� ���������� ���), ���� ����������\n"
+"���� ����� ������������."
+
+#: ../help.pm_.c:64
+msgid ""
+"At this point, you may choose what partition(s) to use to install\n"
+"your Linux-Mandrake system if they have been already defined (from a\n"
+"previous install of Linux or from another partitionning tool). In other\n"
+"cases, hard drive partitions must be defined. This operation consists of\n"
+"logically dividing the computer's hard drive capacity into separate\n"
+"areas for use.\n"
+"\n"
+"\n"
+"If you have to create new partitions, use \"Auto allocate\" to "
+"automatically\n"
+"create partitions for Linux. You can select the disk for partitionning by\n"
+"clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"\n"
+"Two common partition are: the root partition (/), which is the starting\n"
+"point of the filesystem's directory hierarchy, and /boot, which contains\n"
+"all files necessary to start the operating system when the\n"
+"computer is first turned on.\n"
+"\n"
+"\n"
+"Because the effects of this process are usually irreversible, partitioning\n"
+"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
+"simplifies the process so that it need not be. Consult the documentation\n"
+"and take your time before proceeding."
+msgstr ""
+"�� ���� �� ������, �������� �� ��������� ����� ����������� �� "
+"���������������\n"
+"��� ��� ����������� ��� Linux-Mandrake, �� ����� ����� ��� ������� (���\n"
+"���������� ����������� Linux � ��� ������ �������� �����������). "
+"�����������,\n"
+"�� ������ �� ������� �����������. ���� � ���������� ���������� ���� \n"
+"������ ���������� ��� ����� ��� ������� ��� ������ �� ��������.\n"
+"\n"
+"\n"
+"��� ������ �� ������������� ���� �����������, �������� \"��������\n"
+"��������\" ��� �������� ���������� ��� ���������� �����������.\n"
+"�������� �� ��������� �� ����� ������ ����� �� ������������� ��\n"
+"����������� �������� ���� ��� \"hda\" ��� ��� ����� IDE �����, \n"
+"��� \"hdb\" ��� ��� ������� IDE �����, ��� \"sda\" ��� ��� �����\n"
+"SCSI ����� ���.\n"
+"\n"
+"\n"
+"��� ������������ ����������� �����: � ����� ��������� (/), � �����\n"
+"����� �� ������ ������ ��� ��������� ��� ���������� ������� ��� �\n"
+"/boot, � ����� �������� �� ���������� ��� ��� �������� ��� ����������\n"
+"������.\n"
+"\n"
+"\n"
+"������ �� ������������ ��� ����������� ���������� ����� ������� ��\n"
+"�����������, � ���������� ���� ������ �� ����� ������� ��� ����\n"
+"������ ������. �� DiskDrake ��� ��������� ��� ����� �������.\n"
+"�������������� ��� ���������� ��� ��� ��������� ���� �������� ���."
+
+#: ../help.pm_.c:90
+msgid ""
+"Any partitions that have been newly defined must be formatted for\n"
+"use (formatting meaning creating a filesystem). At this time, you may\n"
+"wish to re-format some already existing partitions to erase the data\n"
+"they contain. Note: it is not necessary to re-format pre-existing\n"
+"partitions, particularly if they contain files or data you wish to keep.\n"
+"Typically retained are /home and /usr/local."
+msgstr ""
+"���� �� ���� ����������� ������ �� ������������� ������ \n"
+"��������������� (����������� ����� � ���������� ����������\n"
+"�������). �� ���� �� ������, ���� �������� �� �������������\n"
+"���� ��� ������� ���������� ����������� ��� �� ������� �������\n"
+"�������� ��� ���� ���������. ��������: ��� ����� ���������� �� \n"
+"������������������ ���������� �����������, ������ �� ���������\n"
+"������ ��� �������� �� ����� �� ������ �� ���������. ������� \n"
+"������������ �� ����������� /home ��� /usr/local."
+
+#: ../help.pm_.c:98
+msgid ""
+"You may now select the packages you wish to install.\n"
+"\n"
+"\n"
+"First you can select group of package to install or upgrade. After that\n"
+"you can select more packages according to the total size you wish to\n"
+"select.\n"
+"\n"
+"\n"
+"If you are in expert mode, you can select packages individually.\n"
+"Please note that some packages require the installation of others.\n"
+"These are referred to as package dependencies. The packages you select,\n"
+"and the packages they require will be automatically selected for\n"
+"install. It is impossible to install a package without installing all\n"
+"of its dependencies."
+msgstr ""
+"�������� ���� �� ��������� �� ������ ��� ������ �� ������������.\n"
+"\n"
+"\n"
+"�������� ���' ����� �� ��������� ��� ����� ������� ���� �����������\n"
+"� ����������. ����, �������� �� ���������� ������ ������� �� ���\n"
+"��������� ����.\n"
+"\n"
+"\n"
+"��� ����� �������� ������������� �����������, �������� �� ���������\n"
+"��������� ������. �������� ��������� ��� ������ ������ �������� ���\n"
+"����������� ������� �����. ���� ����������� ����������� ������. �� \n"
+"������ ��� �� ���������, ����� ��� �� ����������� ������, �� \n"
+"���������� ���� �����������. ��� ����� ������� �� ������������ ���\n"
+"������, �� ��� ������������� ��� �� ����������� ��� ���� ������."
+
+#: ../help.pm_.c:114
+msgid ""
+"The packages selected are now being installed. This operation\n"
+"should take a few minutes unless you have chosen to upgrade an\n"
+"existing system, in that case it can take more time even before\n"
+"upgrade starts."
+msgstr ""
+"�� ������ ��� ��������� �� ������������� ����. ���� � ����������\n"
+"�� ��������� ������ �����, ����� ��� ����� �������� �� ������������\n"
+"��� ��������� �����������, ����� �� ��������� ����������� ����� ���\n"
+"���� ������� � ����������."
+
+#: ../help.pm_.c:120
+msgid ""
+"If DrakX failed to find your mouse, or if you want to\n"
+"check what it has done, you will be presented the list of mice\n"
+"above.\n"
+"\n"
+"\n"
+"If you agree with DrakX' settings, just jump to the section\n"
+"you want by clicking on it in the menu on the left. Otherwise,\n"
+"choose a mouse type in the menu which you think is the closest\n"
+"match for your mouse.\n"
+"\n"
+"\n"
+"In case of a serial mouse, you will also have to tell DrakX\n"
+"which serial port it is connected to."
+msgstr ""
+"��� �� DrakX ������� �� ������������ ��� ���� ��������� ���\n"
+"��������������, � ��� ������ �� ����� �� ������� �����, �� ���\n"
+"������������ � �������� ���������.\n"
+"\n"
+"\n"
+"��� ���������� �� ��� �������� ��� DrakX, ���� ���������� ����\n"
+"������� ��� ��� ���������� �������� ���� �� �� ������� ��� �����\n"
+"��� ��������. ������, �������� ���� ���� ��������� ��� ���������\n"
+"��� ����� ������������ ���� ���� ���.\n"
+"\n"
+"\n"
+"���� ��������� ��������� ���������, �� ������ ������ �� ����� ���\n"
+"DrakX �� ���� ���� ����� ����������� �� ������� ���."
+
+#: ../help.pm_.c:135
+msgid ""
+"Please select the correct port. For example, the COM1 port in MS Windows\n"
+"is named ttyS0 in Linux."
+msgstr ""
+"�������� �������� ��� ��������� ����. ��� ����������, � COM1 ��� Windows\n"
+"���������� ttyS0 ��� Linux."
+
+#: ../help.pm_.c:139
+msgid ""
+"This section is dedicated to configuring a local area\n"
+"network (LAN) or a modem.\n"
+"\n"
+"Choose \"Local LAN\" and DrakX will\n"
+"try to find an Ethernet adapter on your machine. PCI adapters\n"
+"should be found and initialized automatically.\n"
+"However, if your peripheral is ISA, autodetection will not work,\n"
+"and you will have to choose a driver from the list that will appear then.\n"
+"\n"
+"\n"
+"As for SCSI adapters, you can let the driver probe for the adapter\n"
+"in the first time, otherwise you will have to specify the options\n"
+"to the driver that you will have fetched from documentation of your\n"
+"hardware.\n"
+"\n"
+"\n"
+"If you install a Linux-Mandrake system on a machine which is part\n"
+"of an already existing network, the network administrator will\n"
+"have given you all necessary information (IP address, network\n"
+"submask or netmask for short, and hostname). If you're setting\n"
+"up a private network at home for example, you should choose\n"
+"addresses.\n"
+"\n"
+"\n"
+"Choose \"Dialup with modem\" and the Internet connection with\n"
+"a modem will be configured. DrakX will try to find your modem,\n"
+"if it fails you will have to select the right serial port where\n"
+"your modem is connected to."
+msgstr ""
+"���� �� ������ ����� ��� ������� ������� ������� (LAN) � ���\n"
+"modem.\n"
+"\n"
+"�������� \"������ ������\" ��� �� DrakX �� ����������� �� \n"
+"��������� ��� ����� ������� Ethernet ��� ������� ���. �� ������\n"
+"PCI �� ����������� ��� �� ������������� ��������. \n"
+"�� ���� � ����� ��� ����� ����� ISA, � ��������� ���������� ��� \n"
+"�� ������������ ��� �� ������ �� ��������� ���� ����� ��� ��� \n"
+"�������� ��� �� ���������� ������ ����.\n"
+"\n"
+"\n"
+"��� ����� ��� ������ SCSI, �������� �� ������� ��� ����� �� ���������\n"
+"��� ����������� (�����) ��� ����� ����, ������ �� ������ �� ������\n"
+"����� ��� �������� �����������, ��� ������ �� ���������� ��� ���\n"
+"���������� ��� ������ ���.\n"
+"\n"
+"\n"
+"��� ����������� �� Linux-Mandrake �� ����� ���� ��� ���������� �������,\n"
+"� ������������ ��� ������� ��� �� ��� ���� ��� ����� ��� ����������� \n"
+"����������� (��������� IP, �����, ����� �������). ��� ���������� ���\n"
+"��� ������, ��� ���������� ��� �����, �� ������ �� ����������� �����\n"
+"��� ��� ��� �����������.\n"
+"\n"
+"\n"
+"�������� \"����� modem\" ��� �� ��������� ��� ������� �� �� ���������\n"
+"���� modem. �� DrakX �� ����������� �� ��������� �� modem ���. ���\n"
+"��������, �� ������ �� ��������� ��� �������� ���� ���� ����� �����\n"
+"����������� �� modem ���."
+
+#: ../help.pm_.c:169
+msgid ""
+"Enter:\n"
+"\n"
+" - IP address: if you don't know it, ask your network administrator or "
+"ISP.\n"
+"\n"
+"\n"
+" - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
+"sure, ask your network administrator or ISP.\n"
+"\n"
+"\n"
+" - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
+"this option. If selected, no value is needed in \"IP address\". If you are\n"
+"not sure, ask your network administrator or ISP.\n"
+msgstr ""
+"��������:\n"
+"\n"
+" - ��������� IP: ��� ��� ��� ������, ������� ��� �������� ������� �\n"
+"��� ������� ���.\n"
+"\n"
+"\n"
+" - ����� �������: \"255.255.255.0\" ����� ������� ���� �������. ��� ���\n"
+"����� ��������, ������� ��� �������� ������� � ��� ������� ���.\n"
+"\n"
+"\n"
+" - �������� ������� IP: ��� �� ������ ��� ������������ ��� ��� �� "
+"����������\n"
+"bootp � dhcp, �������� ����. �� ���� ��� ���������, ��� ���������� �� "
+"������\n"
+"��������� IP � ����� �������. ��� ��� ����� ��������, ������� ��� �������� "
+"������� �\n"
+"��� ������� ���.\n"
+
+#: ../help.pm_.c:184
+msgid ""
+"You may now enter dialup options. If you're not sure what to enter, the\n"
+"correct information can be obtained from your ISP."
+msgstr ""
+"�������� ���� �� �������� ��� �������� ��� dialup. ��� ��� ����� ��������,\n"
+"�������� �� �������� ����������� ��� ��� ������� ���."
+
+#: ../help.pm_.c:188
+msgid ""
+"If you will use proxies, please configure them now. If you don't know if\n"
+"you will use proxies, ask your network administrator or your ISP."
+msgstr ""
+"��� ��������������� proxies, �������� �������� ���� ����. ��� ��� ������,\n"
+"������� ��� ������� ��� � ��� �������� �������."
+
+#: ../help.pm_.c:192
+msgid ""
+"You can install cryptographic package if your internet connection has been\n"
+"set up correctly. First choose a mirror where you wish to download packages "
+"and\n"
+"after that select the packages to install.\n"
+"\n"
+"Note you have to select mirror and cryptographic packages according\n"
+"to your legislation."
+msgstr ""
+"�� � ������� ��� �� �� ��������� ����� ����� ����������, �������� ��\n"
+"������������� ������ �������������. ����� �������� ���� ���� ��'\n"
+"���� �� ���������� �� ������ ��� ���� �������� ���� ������ ��\n"
+"�������������.\n"
+"\n"
+"��������� ��� ������ �� ��������� ���� ��� ������ ������� �� ���\n"
+"��������� ���."
+
+#: ../help.pm_.c:200
+msgid ""
+"You can now select your timezone according to where you live.\n"
+"\n"
+"\n"
+"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
+"in local time according to the time zone you have selected."
+msgstr ""
+"�������� ���� �� ��������� ��� ���� ���� ������� �� �� ����� ���\n"
+"������� �� ���� ����������.\n"
+"\n"
+"\n"
+"�� Linux ���������� ��� ��� �� GMT (\"Greenwich Meridian Time\" � \n"
+"\"���������� ��� ����������\") ��� ��� ���������� �� ������ ���\n"
+"����� ��� ����� ���� ��� �� ���������."
+
+#: ../help.pm_.c:207
+msgid "Help"
+msgstr "�������"
+
+#: ../help.pm_.c:210
+msgid ""
+"Linux can deal with many types of printer. Each of these\n"
+"types require a different setup.\n"
+"\n"
+"\n"
+"If your printer is directly connected to your computer, select\n"
+"\"Local printer\". You will then have to tell which port your\n"
+"printer is connected to, and select the appropriate filter.\n"
+"\n"
+"\n"
+"If you want to access a printer located on a remote Unix machine,\n"
+"you will have to select \"Remote lpd\". In order to make\n"
+"it work, no username or password is required, but you will need\n"
+"to know the name of the printing queue on this server.\n"
+"\n"
+"\n"
+"If you want to access a SMB printer (which means, a printer located\n"
+"on a remote Windows 9x/NT machine), you will have to specify its\n"
+"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
+"plus the username, workgroup and password required in order to\n"
+"access the printer, and of course the name of the printer. The same goes\n"
+"for a NetWare printer, except that you need no workgroup information."
+msgstr ""
+"�� Linux ������ �� ����������� �� ������� ������ ���������. �\n"
+"������� ��� ������ ������� ������������ ���������.\n"
+"\n"
+"\n"
+"��� � ��������� ��� ����� ��' ������� ������������ ���� ����������\n"
+"���, �������� \"������� ���������\". �� ������ ���� �� ������� \n"
+"�� ���� ���� ����� ������������ � ��������� ��� ��� �� ���������\n"
+"�� ��������� ������ (�����).\n"
+"\n"
+"\n"
+"��� ������ �� ��������������� ���� �������� ����������� �� ������\n"
+"��������������� Unix �������, �������� \"���������������� lpd\".\n"
+"��� ���������� �� ������ ������ ������ ��� ������, ���� ������ �� ������\n"
+"�� ����� ��� ����� ��� �������� ��� �� ���������������.\n"
+"\n"
+"\n"
+"��� ������ �� ��������������� ���� �������� SMB (������ ���� ��������\n"
+"����������� �� ������ ������� Windows 9x/NT), �� ������ �� ������\n"
+"�� ����� SMB (�� ����� ��� ����� ����� TCP/IP) ��� ������� ��� ���\n"
+"��������� IP, ����� ������ ��� ������ ������, ���� ������ ��� \n"
+"����� ����� � ������ �������� ��� ������ �� ����� ��� ��������.\n"
+"�� ���� ������� ��� ��� ��������� NetWare, �� ��� ������� ��� \n"
+"��� ���������� ����� ����� � ������ ��������."
+
+#: ../help.pm_.c:233
+msgid ""
+"You can now enter the root password for your Linux-Mandrake\n"
+"system. The password must be entered twice to verify that both\n"
+"password entries are identical.\n"
+"\n"
+"\n"
+"Root is the administrator of the system, and is the only user\n"
+"allowed to modify the system configuration. Therefore, choose\n"
+"this password carefully! Unauthorized use of the root account can\n"
+"be extremely dangerous to the integrity of the system and its data,\n"
+"and other systems connected to it. The password should be a\n"
+"mixture of alphanumeric characters and a least 8 characters long. It\n"
+"should *never* be written down. Do not make the password too long or\n"
+"complicated, though: you must be able to remember without too much\n"
+"effort."
+msgstr ""
+"�������� ���� �� ������� �� ����-������ ��� ��� ������ \"root\".\n"
+"� ���� ������ �� �������� ��� ������� ��� �����������.\n"
+"\n"
+"\n"
+"� root ����� � ������������ ��� ���������� ��� � ����� ��� ���� \n"
+"�� �������� �� ������� ��� ��������� ��� ����������. �� ����, \n"
+"�������� ���������� ���� �� ���� ������! �� ��������������� \n"
+"�������� ��� root ������ �� ��������������� ���������� ��� \n"
+"��� ����������� ��� ���������� ��� ��� ��������� ���, ����� \n"
+"��� ��� ���� ��������� ����������� �� ����. � ���� ������ ������\n"
+"�� ����� ��� ���� �������������� ���������� ��� �� ����� �����������\n"
+"���� (8) ����������. ��� ������ *����* �� �� ������� �� �����. ���\n"
+"�� ������ ���� ���� ����� � ���������, ���� ��� �� ������ �� �����\n"
+"�� ���� �� �� ������� ����� ��������� ����������."
+
+#: ../help.pm_.c:249
+msgid ""
+"To enable a more secure system, you should select \"Use shadow file\" and\n"
+"\"Use MD5 passwords\"."
+msgstr ""
+"��� ���������� ��������, ������ �� ��������� \"����� ������� shadow\" ���\n"
+"\"����� ������������ MD5\"."
+
+#: ../help.pm_.c:253
+msgid ""
+"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
+"network administrator."
+msgstr ""
+"��� �� ������ ��� ������������ NIS, �������� \"����� NIS\". ��� ���\n"
+"����� ��������, �������������� ��� �������� �������."
+
+#: ../help.pm_.c:257
+msgid ""
+"You may now create one or more \"regular\" user account(s), as\n"
+"opposed to the \"privileged\" user account, root. You can create\n"
+"one or more account(s) for each person you want to allow to use\n"
+"the computer. Note that each user account will have its own\n"
+"preferences (graphical environment, program settings, etc.)\n"
+"and its own \"home directory\", in which these preferences are\n"
+"stored.\n"
+"\n"
+"\n"
+"First of all, create an account for yourself! Even if you will be the only "
+"user\n"
+"of the machine, you may NOT connect as root for daily use of the system: "
+"it's a\n"
+"very high security risk. Making the system unusable is very often a typo "
+"away.\n"
+"\n"
+"\n"
+"Therefore, you should connect to the system using the user account\n"
+"you will have created here, and login as root only for administration\n"
+"and maintenance purposes."
+msgstr ""
+"�������� ���� �� ������������� ���� � ������������� \"������\" �������,\n"
+"(�� �������� �� ��� \"���������������\" ������, root). �������� �� \n"
+"������������� ���� � ������������� ������� ��� ���� ������� ��� ������\n"
+"�� ���� �������� ��� ������� ���. ��������� ��� ���� ������� ���� ���\n"
+"����� ��� ��������� (������� ����������, ��������� ��������� ���),\n"
+"����� ��� �� ���� ��� \"home directory\", ��� ����� �������������\n"
+"����� �� ���������.\n"
+"\n"
+"\n"
+"���' �����, ������������ ���� ������ ��� ��� ����� ���! ����� ��� ���\n"
+"����� � ��������� ������� ��� ����������, ��� ������ �� ��������������\n"
+"�� root ��� ��� ���������� ����� ��� ����������, ����� ���� �� \n"
+"������������ ���������. ��� ���� ����� �������������� ����� ������\n"
+"��� �� ����������� ��� ����������� ��� ���� ��������� �� root.\n"
+"\n"
+"\n"
+"�� ����, �� ������ �� ��������� ��� ������� ��� ��������������� ����\n"
+"������ ����� ������ ��� �� ��������� �� root ���� ��� �������� ���������\n"
+"��� ���������� ��� ����������."
+
+#: ../help.pm_.c:276
+msgid ""
+"It is strongly recommended that you answer \"Yes\" here. If you install\n"
+"Microsoft Windows at a later date it will overwrite the boot sector.\n"
+"Unless you have made a bootdisk as suggested, you will not be able to\n"
+"boot into Linux any more."
+msgstr ""
+"��� ���������� �� ���������� \"���\"! ��� ������ ��������\n"
+"��������������� ��� Windows, �� ������� ��� ����� ���������\n"
+"(boot sector) ��� ����������. ��� �� �������� �� ����������\n"
+"�� Linux, ����� ��� �� ����� ������������ �������� ���������\n"
+"���� ����������� ���!"
+
+#: ../help.pm_.c:282
+msgid ""
+"You need to indicate where you wish\n"
+"to place the information required to boot to Linux.\n"
+"\n"
+"\n"
+"Unless you know exactly what you are doing, choose \"First sector of\n"
+"drive (MBR)\"."
+msgstr ""
+"������ �� ������������� ��� ������ �� ������������� �� \n"
+"����������� ��� ����� ����������� ��� ��� �������� ��� \n"
+"Linux.\n"
+"\n"
+"\n"
+"����� ��� �� ������ ���� ���� �� ������, �������� \"������ ������\n"
+"��� ������ (MBR)\"."
+
+#: ../help.pm_.c:290
+msgid ""
+"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
+"(the master drive on the primary channel)."
+msgstr ""
+"����� ��� �� ����� �������� ��� ��� ����� ����, � ����������� �������\n"
+"����� \"/dev/hda\" (� ������ ������ ��� ����� ������)."
+
+#: ../help.pm_.c:294
+msgid ""
+"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
+"Normally they are correctly detected during installation. If you don't\n"
+"see yours detected, you can add one or more now.\n"
+"\n"
+"\n"
+"If you don't want that everybody could access at one of them, you can "
+"remove\n"
+"it now (a boot disk will be needed to boot it)."
+msgstr ""
+"�� LILO ������ �� ��������� �� Linux ��� ���� �.�. �������� ����\n"
+"�������������� �������� ���� ��� �����������. ��� ������ ��� �����\n"
+"������������, �������� �� �� ���������� ����.\n"
+"\n"
+"\n"
+"��� ������ ������ ��� ���� �� ��� ����� ������ ������������,\n"
+"��������� �� ���� (�� ����������� ������� ��������� ��� �� ��\n"
+"����������)."
+
+#: ../help.pm_.c:303
+msgid ""
+"LILO main options are:\n"
+" - Boot device: Sets the name of the device (e.g. a hard disk\n"
+"partition) that contains the boot sector. Unless you know specifically\n"
+"otherwise, choose \"/dev/hda\".\n"
+"\n"
+"\n"
+" - Linear: Generate linear sector addresses instead of\n"
+"sector/head/cylinder addresses. Linear addresses are translated at run\n"
+"time and do not depend on disk geometry. Note that boot disks may not be\n"
+"portable if \"linear\" is used, because the BIOS service to determine the\n"
+"disk geometry does not work reliably for floppy disks. When using\n"
+"\"linear\" with large disks, /sbin/lilo may generate references to\n"
+"inaccessible disk areas, because 3D sector addresses are not known\n"
+"before boot time.\n"
+"\n"
+"\n"
+" - Compact: Tries to merge read requests for adjacent sectors into a\n"
+"single read request. This drastically reduces load time and keeps the\n"
+"map smaller. Using \"compact\" is especially recommended when booting from\n"
+"a floppy disk.\n"
+"\n"
+"\n"
+" - Delay before booting default image: Specifies the number in tenths\n"
+"of a second the boot loader should wait before booting the first image.\n"
+"This is useful on systems that immediately boot from the hard disk after\n"
+"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
+"omitted or is set to zero.\n"
+"\n"
+"\n"
+" - Video mode: This specifies the VGA text mode that should be selected\n"
+"when booting. The following values are available: \n"
+" * normal: select normal 80x25 text mode.\n"
+" * <number>: use the corresponding text mode."
+msgstr ""
+"�� ������ �������� ��� LILO �����:\n"
+" - ������� ���������: ������ �� ����� ��� �������� (�.�. ��� \n"
+"���������) ��� �������� ��� ����� ���������. ����� ��� �� �����\n"
+"�������� ��� ����� ������, �������� \"/dev/hda\".\n"
+"\n"
+"\n"
+" - ��������: ���������� ��������� ����������� ������ ���� ���\n"
+"����������� ����� ������/������/���������. �� ��������� �����������\n"
+"������������� ���� ��� �������� ��� ����� ����������� ��� ����������\n"
+"��� ������. ��������� ��� �� ��� ������� ����, ����� ��������� ���������\n"
+"������ �� ��� ����� ������������, ������ � ������ ����������� ��� "
+"����������\n"
+"��� ������ ����� ������������ ���� ��������� ��� ���������. ���� "
+"��������������\n"
+"�� �������� �������, �� /sbin/lilo ������ �� ������������ �������� �� �� \n"
+"����������� �������� ��� ������, ������ �� 3D ����������� ������ �����\n"
+"�������� ���� ��� ��������.\n"
+"\n"
+"\n"
+" - �����������: ��������� �� ���������� �������� ��������� �� \n"
+"����������� ������. ���� ������� �������� ��� ����� �������� ���\n"
+"�������� ��� ����� ���������. ���������� ��� �������� ��� ��������.\n"
+"\n"
+"\n"
+" - ����������� ���� ��� ��������: ������ �� ������ ��� �������������\n"
+"��� �� ������� �� ��������� ���� ��������� �� ����� �����������.\n"
+"���� ����� ������� ������� �� ��������� ��� �������� ��� ��� �����\n"
+"������ ���� ��� ������������ ��� �������������. ��� ������� �����������\n"
+"��� � ������� ����������� � ����� �����.\n"
+"\n"
+"\n"
+" - ������� ������: ���� ������ ��� VGA ������� �������� ��� �� ��������\n"
+"���� ��� ��������. �������� �� �������� ��������: \n"
+" * normal: �������� ������� �������� 80�25.\n"
+" * <�������>: ����� ��� ����������� �������� ��������."
+
+#: ../help.pm_.c:338
+msgid ""
+"Now it's time to configure the X Window System, which is the\n"
+"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
+"you must configure your video card and monitor. Most of these\n"
+"steps are automated, though, therefore your work may only consist\n"
+"of verifying what has been done and accept the settings :)\n"
+"\n"
+"\n"
+"When the configuration is over, X will be started (unless you\n"
+"ask DrakX not to) so that you can check and see if the\n"
+"settings suit you. If they don't, you can come back and\n"
+"change them, as many times as necessary."
+msgstr ""
+"���� ������ �� ��������� �� X Window System, �� ����� ����� � \n"
+"������� ��� �������� ������������� (GUI) ��� Linux. ������ ��\n"
+"��������� ��� ����� �������� ��� ��� ����� ���. �� ����������\n"
+"����� ��� ����������� ����� ����������������, ����� � �������\n"
+"��� ���������� ���� ����������� ��� ������� ��� ��������� \n"
+"��������� :)\n"
+"\n"
+"\n"
+"���� ����������� � ���������� ��������, �� ��������� ��\n"
+"X Window ������� (����� ��� ����� ����������� ������), ���\n"
+"�� �������� ��� �� ��������� ��� �����������. ��� ���, \n"
+"�������� �� ����������� ��� ��� �� ����������� ��� ���������\n"
+"���� ����� ���������."
+
+#: ../help.pm_.c:351
+msgid ""
+"If something is wrong in X configuration, use these options to correctly\n"
+"configure the X Window System."
+msgstr ""
+"��� ���� ��� ���� ���� �� ��� ��������� ��� �, ��������������� ����� ���\n"
+"�������� ��� �� ��������� ����� �� ������� ���������� (X Window System)."
+
+#: ../help.pm_.c:355
+msgid ""
+"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
+"\"No\"."
+msgstr ""
+"��� ��������� �������� �� ������� ���������� �������� \"���\". ������, \n"
+"�������� \"���\"."
+
+#: ../help.pm_.c:359
+msgid ""
+"You can now select some miscellaneous options for you system.\n"
+"\n"
+" - Use hard drive optimizations: This option can improve hard disk\n"
+"accesses but is only for advanced users, it can ruin your hard drive if\n"
+"used incorrectly. Use it only if you know how.\n"
+"\n"
+"\n"
+" - Choose security level: You can choose a security level for your\n"
+"system.\n"
+" Please refer to the manual for more information.\n"
+"\n"
+"\n"
+" - Precise RAM size if needed: In some cases, Linux is unable to\n"
+"correctly detect all the installed RAM on some systems. If this is the\n"
+"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
+"normal.\n"
+"\n"
+"\n"
+" - Removable media automounting: If you would prefer not to manually\n"
+"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
+"\"umount\", select this option. \n"
+"\n"
+"\n"
+" - Enable Num Lock at startup: If you want Number Lock enabled after\n"
+"booting, select this option (Note: Num Lock will still not work under\n"
+"X)."
+msgstr ""
+"�������� ���� �� ��������� �������� ��������� ��� �� ������� ���.\n"
+"\n"
+" - ����� ���������������� ������� ������: ���� � ������� ������ �� "
+"���������\n"
+"��� ��������� ��� ������� ��� ������, ���� ����������� ���� ��� "
+"�������������\n"
+"�������, ������ ������ �� ����������� ��� ����� �� �������������� "
+"����������.\n"
+"\n"
+"\n"
+" - ������� �������� ���������: �������� ������� ��������� ��� �� ������� "
+"���.\n"
+"�������� ��������� ���� ���������� ��� ��������� �����������.\n"
+"\n"
+"\n"
+" - ������� ������� RAM ��� ����������: �� ������� �����������, �� Linux "
+"���\n"
+"������ �� ���������� ��� ������������� RAM. ��� ���� ������, �������� �� "
+"�����\n"
+"�������. ��������: ��� ������� 2 � 4 MB ��������� �����������.\n"
+"\n"
+"\n"
+" �������� ������� ����������� �����: ��� ��������� �� ������� �������� � "
+"�������\n"
+"������������ ����� ����������� (CD-ROM, ��������, Zip), �������� ����� ��� "
+"�������.\n"
+"\n"
+"\n"
+" - ������������ numlock ���� ��������: ��� ������ �� Number Lock �� ����� "
+"������\n"
+"���� ��� ��������, �������� (��������: �� Num Lock �� ��������� �� ����� "
+"��������\n"
+"��� ������� X Window)."
+
+#: ../help.pm_.c:387
+msgid ""
+"Your system is going to reboot.\n"
+"\n"
+"After rebooting, your new Linux Mandrake system will load automatically.\n"
+"If you want to boot into another existing operating system, please read\n"
+"the additional instructions."
+msgstr ""
+"�� ������� ��� �� �������������.\n"
+"\n"
+"���� ��� ������������, �� ��� ��� Linux Mandrake ������� �� ���������\n"
+"��������. ��� ������ �� ���������� ��� ���� ������� �����������, ��������\n"
+"�������� ��� �������� �������."
+
+#: ../install2.pm_.c:43
+msgid "Choose your language"
+msgstr "�������� ������"
+
+#: ../install2.pm_.c:44
+msgid "Select installation class"
+msgstr "�������� �����������"
+
+#: ../install2.pm_.c:45
+msgid "Setup SCSI"
+msgstr "����������� SCSI"
+
+#: ../install2.pm_.c:46
+msgid "Choose install or upgrade"
+msgstr "����������� � ����������;"
+
+#: ../install2.pm_.c:47
+msgid "Configure mouse"
+msgstr "������� ���������"
+
+#: ../install2.pm_.c:48
+msgid "Choose your keyboard"
+msgstr "�������� ������������"
+
+#: ../install2.pm_.c:49
+msgid "Miscellaneous"
+msgstr "�������"
+
+#: ../install2.pm_.c:50
+msgid "Setup filesystems"
+msgstr "�����. ���. ���."
+
+#: ../install2.pm_.c:51
+msgid "Format partitions"
+msgstr "������. ��������."
+
+#: ../install2.pm_.c:52
+msgid "Choose packages to install"
+msgstr "������� �������"
+
+#: ../install2.pm_.c:53
+msgid "Install system"
+msgstr "����������� ����������"
+
+#: ../install2.pm_.c:54
+msgid "Configure networking"
+msgstr "������� �������"
+
+#: ../install2.pm_.c:55
+msgid "Cryptographic"
+msgstr "������������"
+
+#: ../install2.pm_.c:56
+msgid "Configure timezone"
+msgstr "������� ����� ����"
+
+#: ../install2.pm_.c:58
+msgid "Configure printer"
+msgstr "������� ��������"
+
+#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:577
+msgid "Set root password"
+msgstr "����������� root"
+
+#: ../install2.pm_.c:60
+msgid "Add a user"
+msgstr "�������� ������"
+
+#: ../install2.pm_.c:61
+msgid "Create a bootdisk"
+msgstr "������� ���������"
+
+#: ../install2.pm_.c:62
+msgid "Install bootloader"
+msgstr "���. ��. ���������"
+
+#: ../install2.pm_.c:63
+msgid "Configure X"
+msgstr "������� �"
+
+#: ../install2.pm_.c:64
+msgid "Exit install"
+msgstr "������"
+
+#: ../install2.pm_.c:83
+msgid "beginner"
+msgstr "��������"
+
+#: ../install2.pm_.c:83
+msgid "developer"
+msgstr "���������������"
+
+#: ../install2.pm_.c:83
+msgid "expert"
+msgstr "�������"
+
+#: ../install2.pm_.c:83
+msgid "server"
+msgstr "������������"
+
+#: ../install2.pm_.c:311
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"������ �� ����� ��� ������ ���������.\n"
+"����o������� � �������� ��� ���������.\n"
+"���� ������ �� ������ �������� �� `/'"
+
+#: ../install2.pm_.c:327
+msgid "Not enough swap to fulfill installation, please add some"
+msgstr ""
+"��� ������� ������ swap ��� ��� ���������� ��� ������������, �������� "
+"���������"
+
+#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+"��� ����� �� ������� ��� ������ �����������, ����� ���� ������������� :(\n"
+"�� ���������� �� �������� ���������� ��� ����������� �����������"
+
+#: ../install_any.pm_.c:210
+msgid ""
+"DiskDrake failed to read correctly the partition table.\n"
+"Continue at your own risk!"
+msgstr ""
+"�� DiskDrake ������� �� �������� ����� ��� ������ �����������.\n"
+"��������� �� ���� ��� ������!"
+
+#: ../install_any.pm_.c:220
+msgid "Searching root partition."
+msgstr "������ ��� root partition."
+
+#: ../install_any.pm_.c:249
+msgid "Information"
+msgstr "�����������"
+
+#: ../install_any.pm_.c:250
+#, c-format
+msgid "%s: This is not a root partition, please select another one."
+msgstr "%s: ���� ��� ����� root partition, �������� �������� ��� ����."
+
+#: ../install_any.pm_.c:252
+msgid "No root partition found"
+msgstr "��� ������� root partition"
+
+#: ../install_any.pm_.c:289
+msgid "Can't use broadcast with no NIS domain"
+msgstr "��� ����� �� ������������� broadcast ����� NIS domain"
+
+#: ../install_any.pm_.c:473
+msgid "Error reading file $f"
+msgstr "������ ���� ��� �������� ��� ������� $f"
+
+#: ../install_any.pm_.c:479
+#, c-format
+msgid "Bad kickstart file %s (failed %s)"
+msgstr "���������� ������ ������������ %s (������� %s)"
+
+#: ../install_steps.pm_.c:72
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"���������� ������ ��� ��� ���� ��� �� �� ��������.\n"
+"��������� �� ����� ��� ������."
+
+#: ../install_steps.pm_.c:136
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "����� ������ �������� %s"
+
+#: ../install_steps.pm_.c:295
+#, fuzzy, c-format
+msgid "Welcome to %s"
+msgstr "����� ������ ����� Crackers"
+
+#: ../install_steps.pm_.c:562
+msgid "No floppy drive available"
+msgstr "��� ������� ���������� ������ ���������"
+
+#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "���� `%s'\n"
+
+#: ../install_steps_gtk.pm_.c:259
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX now needs to resize your Windows partition. Be careful: this operation "
+"is\n"
+"dangerous. If you have not already done so, you should first exit the\n"
+"installation, run scandisk under Windows (and optionally run defrag), then\n"
+"restart the installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"�������!\n"
+"\n"
+"�� DrakX ������ ���� �� ������� �� ������� ��� ���������� ��� Windows.\n"
+"� ���������� ���� ���������� ���������. ��� ��� �� ����� ����� ���,\n"
+"�� ������ �� �������� ��� ��������� �� ������ ������� ��������� (��\n"
+"scandisk) ��� ���� ��������� �� ��� ���������������������� (defragment).\n"
+"���� �� ������ �� ��������� ��������� ��������� ��� ��������� ���.\n"
+"��� ����� ��������, ������� Ok."
+
+#: ../install_steps_gtk.pm_.c:278
+msgid "Automatic resizing failed"
+msgstr "�������� ������ �������� �������"
+
+#: ../install_steps_gtk.pm_.c:294
+msgid "You must have a swap partition"
+msgstr "������ �� ����� ��� ��������� swap"
+
+#: ../install_steps_gtk.pm_.c:296
+msgid ""
+"You don't have a swap partition\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"��� ����� ������ ��������� swap\n"
+"\n"
+"�� ��������;"
+
+#: ../install_steps_gtk.pm_.c:312
+msgid ""
+"Now that you've selected desired groups, please choose \n"
+"how many packages you want, ranging from minimal to full \n"
+"installation of each selected groups."
+msgstr ""
+
+#: ../install_steps_gtk.pm_.c:315
+msgid "You will be able to choose more precisely in next step"
+msgstr "�� ��������� �� ������ �������������� ������� ��� ������� ����"
+
+#: ../install_steps_gtk.pm_.c:317
+msgid "Choose the size you want to install"
+msgstr "�������� �� ������� ��� ������ �� �������������"
+
+#: ../install_steps_gtk.pm_.c:361
+msgid "Total size: "
+msgstr "�������� �������: "
+
+#: ../install_steps_gtk.pm_.c:372
+msgid "Bad package"
+msgstr "����� ������"
+
+#: ../install_steps_gtk.pm_.c:373 ../standalone/rpmdrake_.c:136
+#, c-format
+msgid "Version: %s\n"
+msgstr "������: %s\n"
+
+#: ../install_steps_gtk.pm_.c:374 ../standalone/rpmdrake_.c:137
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "�������: %d KB\n"
+
+#: ../install_steps_gtk.pm_.c:489
+msgid "Choose the packages you want to install"
+msgstr "�������� �� ������ ��� ������ �� �������������"
+
+#: ../install_steps_gtk.pm_.c:492
+msgid "Info"
+msgstr "�����������"
+
+#: ../install_steps_gtk.pm_.c:500 ../install_steps_interactive.pm_.c:81
+#: ../standalone/rpmdrake_.c:161
+msgid "Install"
+msgstr "�����������"
+
+#: ../install_steps_gtk.pm_.c:519 ../install_steps_interactive.pm_.c:317
+msgid "Installing"
+msgstr "�����������"
+
+#: ../install_steps_gtk.pm_.c:522
+msgid "Estimating"
+msgstr "��������"
+
+#: ../install_steps_gtk.pm_.c:526
+msgid "Please wait, "
+msgstr "�������� ����������, "
+
+#: ../install_steps_gtk.pm_.c:528
+msgid "Time remaining "
+msgstr "���������� ������ "
+
+#: ../install_steps_gtk.pm_.c:529
+msgid "Total time "
+msgstr "��������� ������ "
+
+#: ../install_steps_gtk.pm_.c:534 ../install_steps_interactive.pm_.c:317
+msgid "Preparing installation"
+msgstr "������������ ������������"
+
+#: ../install_steps_gtk.pm_.c:544
+#, c-format
+msgid "%d packages"
+msgstr "%d ������"
+
+#: ../install_steps_gtk.pm_.c:544
+msgid ", %U MB"
+msgstr ", %U MB"
+
+#: ../install_steps_gtk.pm_.c:549
+#, c-format
+msgid "Installing package %s"
+msgstr "����������� ������� %s"
+
+#: ../install_steps_gtk.pm_.c:574
+msgid "Go on anyway?"
+msgstr "�� ��������;"
+
+#: ../install_steps_gtk.pm_.c:574
+msgid "There was an error ordering packages:"
+msgstr "���������� ������ ���� ��� ���������� ��� �������:"
+
+#: ../install_steps_interactive.pm_.c:37
+msgid "An error occurred"
+msgstr "���������� ������"
+
+#: ../install_steps_interactive.pm_.c:54
+msgid "Which language do you want?"
+msgstr "�� ������ ���������;"
+
+#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
+msgid "Keyboard"
+msgstr "������������"
+
+#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
+msgid "What is your keyboard layout?"
+msgstr "�� ���������� ������������� �����;"
+
+#: ../install_steps_interactive.pm_.c:79
+msgid "Install/Upgrade"
+msgstr "�����������/����������"
+
+#: ../install_steps_interactive.pm_.c:80
+msgid "Is this an install or an upgrade?"
+msgstr "��������� ��� ����������� � ��� ����������;"
+
+#: ../install_steps_interactive.pm_.c:81
+msgid "Upgrade"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:89
+msgid "Root Partition"
+msgstr "Root Partition (������ ��������� ����������)"
+
+#: ../install_steps_interactive.pm_.c:90
+msgid "What is the root partition (/) of your system?"
+msgstr "���� ����� � ������ ��������� (/) ��� ���������� ���;"
+
+#: ../install_steps_interactive.pm_.c:100
+msgid "Recommended"
+msgstr "�����������"
+
+#: ../install_steps_interactive.pm_.c:101
+msgid "Customized"
+msgstr "�������������"
+
+#: ../install_steps_interactive.pm_.c:102
+msgid "Expert"
+msgstr "��� ��������"
+
+#: ../install_steps_interactive.pm_.c:104
+#: ../install_steps_interactive.pm_.c:118
+msgid "Install Class"
+msgstr "����� ������������"
+
+#: ../install_steps_interactive.pm_.c:105
+msgid "What installation class do you want?"
+msgstr "�� ���� ������������ ���������;"
+
+#: ../install_steps_interactive.pm_.c:114
+msgid "Normal"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:115
+msgid "Development"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:116
+msgid "Server"
+msgstr "������������ �������"
+
+#: ../install_steps_interactive.pm_.c:119
+msgid "What usage do you want?"
+msgstr "�� ����� ������;"
+
+#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
+msgid "What is the type of your mouse?"
+msgstr "�� ���� ��������� �����;"
+
+#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
+msgid "Mouse Port"
+msgstr "���� ���������"
+
+#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
+msgid "Which serial port is your mouse connected to?"
+msgstr "�� ���� �������� ���� ����� ����������� �� ������� ���;"
+
+#: ../install_steps_interactive.pm_.c:157
+msgid "no available partitions"
+msgstr "��� �������� ���������� �����������"
+
+#: ../install_steps_interactive.pm_.c:159
+#, c-format
+msgid "(%dMb)"
+msgstr "(%dMb)"
+
+#: ../install_steps_interactive.pm_.c:166
+msgid "Which partition do you want to use as your root partition"
+msgstr "���� ��������� �� ��������������� �� ����� (/);"
+
+#: ../install_steps_interactive.pm_.c:173
+msgid "Choose the mount points"
+msgstr "�������� ������ ��������"
+
+#: ../install_steps_interactive.pm_.c:185
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"���������� ������������ ��� �� �������������� �� ������� ���� ������ "
+"�����������"
+
+#: ../install_steps_interactive.pm_.c:207
+msgid "Choose the partitions you want to format"
+msgstr "�������� ����������� ���� �����������"
+
+#: ../install_steps_interactive.pm_.c:211
+msgid "Check bad blocks?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:230
+msgid "Looking for available packages"
+msgstr "����� ��� ��������� ������"
+
+#: ../install_steps_interactive.pm_.c:236
+msgid "Finding packages to upgrade"
+msgstr "������������� ������� ���� ����������"
+
+#: ../install_steps_interactive.pm_.c:266
+#, c-format
+msgid ""
+"You need %dMB for a full install of the groups you selected.\n"
+"You can go on anyway, but be warned that you won't get all packages"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:290
+msgid "Package Group Selection"
+msgstr "������� ������ �������"
+
+#: ../install_steps_interactive.pm_.c:326
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"����������� ������� %s\n"
+"%d%%"
+
+#: ../install_steps_interactive.pm_.c:335
+msgid "Post install configuration"
+msgstr "��������� ���� ��� �����������"
+
+#: ../install_steps_interactive.pm_.c:346
+msgid "Keep the current IP configuration"
+msgstr "��������� ���������� ��������� IP"
+
+#: ../install_steps_interactive.pm_.c:347
+msgid "Reconfigure network now"
+msgstr "������������ ������� ����"
+
+#: ../install_steps_interactive.pm_.c:348
+#: ../install_steps_interactive.pm_.c:360
+msgid "Do not set up networking"
+msgstr "�� ��� ��������� �� ������"
+
+#: ../install_steps_interactive.pm_.c:350
+#: ../install_steps_interactive.pm_.c:358
+msgid "Network Configuration"
+msgstr "��������� �������"
+
+#: ../install_steps_interactive.pm_.c:351
+msgid "Local networking has already been configured. Do you want to:"
+msgstr "� ������ �������� ����� ��� ����������. ������ ��:"
+
+#: ../install_steps_interactive.pm_.c:359
+msgid "Do you want to configure networking for your system?"
+msgstr "������ �� ��������� ��� �������� ��� ���������� ���;"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Dialup with modem"
+msgstr "����� modem"
+
+#: ../install_steps_interactive.pm_.c:360
+msgid "Local LAN"
+msgstr "������ ������"
+
+#: ../install_steps_interactive.pm_.c:369
+msgid "no network card found"
+msgstr "��� ������� ������������ �������"
+
+#: ../install_steps_interactive.pm_.c:399
+#: ../install_steps_interactive.pm_.c:400
+#, c-format
+msgid "Configuring network device %s"
+msgstr "������� �������� ������� %s"
+
+#: ../install_steps_interactive.pm_.c:401
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"�������� �������� ��� IP ��������� ��� ���� �� �������.\n"
+"���� �������� ������ �� �������� �� IP ��������� �� ��������\n"
+"����� (����������: 1.2.3.4)."
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Automatic IP"
+msgstr "�������� IP"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "IP address:"
+msgstr "IP ���������:"
+
+#: ../install_steps_interactive.pm_.c:404
+msgid "Netmask:"
+msgstr "����� �������:"
+
+#: ../install_steps_interactive.pm_.c:405
+msgid "(bootp/dhcp)"
+msgstr "(bootp/dhcp)"
+
+#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
+msgid "IP address should be in format 1.2.3.4"
+msgstr "� IP ��������� ������ �� ����� �� ����� 1.2.3.4"
+
+#: ../install_steps_interactive.pm_.c:429
+msgid "Configuring network"
+msgstr "������� �������"
+
+#: ../install_steps_interactive.pm_.c:430
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one"
+msgstr ""
+"�������� �������� �� ����� ��� ����������.\n"
+"�� ����� ���� ������ �� ����� ��� ������ ����� ����������,\n"
+"���� �.�. ``mybox.mylab.myco.com''.\n"
+"�������� ������ �� �������� ��� ��� ��������� IP ��� ����� �������"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "DNS server:"
+msgstr "������������ DNS:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway device:"
+msgstr "������� �����:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Gateway:"
+msgstr "���� �������:"
+
+#: ../install_steps_interactive.pm_.c:434
+msgid "Host name:"
+msgstr "����� ����������:"
+
+#: ../install_steps_interactive.pm_.c:447
+msgid "Try to find a modem?"
+msgstr "�� ���� ��� modem?"
+
+#: ../install_steps_interactive.pm_.c:457
+msgid "Which serial port is your modem connected to?"
+msgstr "�� ���� �������� ����� ����� ����������� �� modem ���;"
+
+#: ../install_steps_interactive.pm_.c:462
+msgid "Dialup options"
+msgstr "�������� dialup"
+
+#: ../install_steps_interactive.pm_.c:463
+msgid "Connection name"
+msgstr "����� ��������"
+
+#: ../install_steps_interactive.pm_.c:464
+msgid "Phone number"
+msgstr "������� ���������"
+
+#: ../install_steps_interactive.pm_.c:465
+msgid "Login ID"
+msgstr "Login ID"
+
+#: ../install_steps_interactive.pm_.c:466
+#: ../install_steps_interactive.pm_.c:578
+#: ../install_steps_interactive.pm_.c:624
+#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
+msgid "Password"
+msgstr "�����������"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Authentication"
+msgstr "����������� ����������"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "PAP"
+msgstr "PAP"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Script-based"
+msgstr "����� script"
+
+#: ../install_steps_interactive.pm_.c:467
+msgid "Terminal-based"
+msgstr "����� ����������"
+
+#: ../install_steps_interactive.pm_.c:468
+msgid "Domain name"
+msgstr "����� �������"
+
+#: ../install_steps_interactive.pm_.c:469
+msgid "First DNS Server"
+msgstr "������ ������������ DNS"
+
+#: ../install_steps_interactive.pm_.c:470
+msgid "Second DNS Server"
+msgstr "�������� ������������ DNS"
+
+#: ../install_steps_interactive.pm_.c:483
+msgid "Bringing up the network"
+msgstr "�������� �������"
+
+#: ../install_steps_interactive.pm_.c:492
+msgid ""
+"You have now the possibility to download software aimed for encryption.\n"
+"\n"
+"WARNING:\n"
+"\n"
+"Due to different general requirements applicable to these software and "
+"imposed\n"
+"by various jurisdictions, customer and/or end user of theses software "
+"should\n"
+"ensure that the laws of his/their jurisdiction allow him/them to download, "
+"stock\n"
+"and/or use these software.\n"
+"\n"
+"In addition customer and/or end user shall particularly be aware to not "
+"infringe\n"
+"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
+"respect the provision of these applicable laws, he/they will incur serious\n"
+"sanctions.\n"
+"\n"
+"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
+"liable\n"
+"for special, indirect or incidental damages whatsoever (including, but not\n"
+"limited to loss of profits, business interruption, loss of commercial data "
+"and\n"
+"other pecuniary losses, and eventual liabilities and indemnification to be "
+"paid\n"
+"pursuant to a court decision) arising out of use, possession, or the sole\n"
+"downloading of these software, to which customer and/or end user could\n"
+"eventually have access after having sign up the present agreement.\n"
+"\n"
+"\n"
+"For any queries relating to these agreement, please contact \n"
+"Mandrakesoft, Inc.\n"
+"2400 N. Lincoln Avenue Suite 243\n"
+"Altadena California 91001\n"
+"USA"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:523
+msgid "Choose a mirror from which to get the packages"
+msgstr "�������� ���� ��� ��� ����� �� ����� � ���� �������"
+
+#: ../install_steps_interactive.pm_.c:528
+msgid "Contacting the mirror to get the list of available packages"
+msgstr "������� ��� ���� �������"
+
+#: ../install_steps_interactive.pm_.c:532
+msgid "Which packages do you want to install"
+msgstr "���� ������ ������ �� �������������"
+
+#: ../install_steps_interactive.pm_.c:534
+msgid "Downloading cryptographic packages"
+msgstr "���� ������� �������������"
+
+#: ../install_steps_interactive.pm_.c:544
+msgid "Which is your timezone?"
+msgstr "�������� ���� ����"
+
+#: ../install_steps_interactive.pm_.c:545
+msgid "Is your hardware clock set to GMT?"
+msgstr "�� ����� ��� ���������� ��� ����� ���������� �� GMT (��� ����������);"
+
+#: ../install_steps_interactive.pm_.c:555
+msgid "Printer"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:556
+msgid "Would you like to configure a printer?"
+msgstr "�� ������ �� ��������� ���� ��������;"
+
+#: ../install_steps_interactive.pm_.c:576
+msgid "No password"
+msgstr "����� �����������"
+
+#: ../install_steps_interactive.pm_.c:576
+#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
+#: ../my_gtk.pm_.c:525
+msgid "Ok"
+msgstr "��"
+
+#: ../install_steps_interactive.pm_.c:579
+#: ../install_steps_interactive.pm_.c:625
+#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
+msgid "Password (again)"
+msgstr "����������� (����)"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "Use shadow file"
+msgstr "����� ������� shadow"
+
+#: ../install_steps_interactive.pm_.c:581
+msgid "shadow"
+msgstr "shadow"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "MD5"
+msgstr "MD5"
+
+#: ../install_steps_interactive.pm_.c:582
+msgid "Use MD5 passwords"
+msgstr "����� ������������ MD5"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "Use NIS"
+msgstr "����� NIS"
+
+#: ../install_steps_interactive.pm_.c:584
+msgid "yellow pages"
+msgstr "yellow pages"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "Please try again"
+msgstr "�������� ����������� ����"
+
+#: ../install_steps_interactive.pm_.c:588
+#: ../install_steps_interactive.pm_.c:636
+#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
+msgid "The passwords do not match"
+msgstr "�� ����������� ����� �������"
+
+#: ../install_steps_interactive.pm_.c:590
+#, c-format
+msgid "This password is too simple (must be at least %d characters long)"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:597
+msgid "Authentification NIS"
+msgstr "����������� NIS"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Domain"
+msgstr "������� (domain) NIS"
+
+#: ../install_steps_interactive.pm_.c:598
+msgid "NIS Server"
+msgstr "������������ NIS"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Accept user"
+msgstr "������� ������"
+
+#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
+msgid "Add user"
+msgstr "�������� ������"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid "(already added %s)"
+msgstr "(�� %s ���� ��� ���������)"
+
+#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"�������� ������\n"
+"%s"
+
+#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
+msgid "Real name"
+msgstr "���������� �����"
+
+#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
+msgid "User name"
+msgstr "������ �����"
+
+#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
+msgid "Shell"
+msgstr "������ (shell)"
+
+#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
+msgid "This password is too simple"
+msgstr "�� ����������� ����� ���� ����"
+
+#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
+msgid "Please give a user name"
+msgstr "�������� �������� ������ �����"
+
+#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"�� ������ ����� ������ �� �������� ���� ���� ��������, ��������, `-' ��� `_'"
+
+#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
+msgid "This user name is already added"
+msgstr "���� �� ������ ����� ������� ���"
+
+#: ../install_steps_interactive.pm_.c:659
+#, fuzzy
+msgid "First drive"
+msgstr "������ ������������ DNS"
+
+#: ../install_steps_interactive.pm_.c:660
+#, fuzzy
+msgid "Second drive"
+msgstr "�������� ������������ DNS"
+
+#: ../install_steps_interactive.pm_.c:661
+msgid "Skip"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:666
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO on your system, or another operating system removes LILO, or LILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?"
+msgstr ""
+"��� ������������� �������� ��������� ��� ����� ��� ���������� �� ����������\n"
+"�� ������� ��� ����� ��� ����� ��� LILO. ���� ����� ������� ��� ��� ������\n"
+"�� ������������� �� LILO, ��� ������ ���� ����������� ����������� �� LILO\n"
+"� ��� �� ��������� ��� ��� ���������� �� ����� LILO. ���� � �������� ������\n"
+"������ �� �������������� �� ��������� �� ��� �������� �������� ��� "
+"Mandrake,\n"
+"�������� ���������� ��� ��������� ��� ���������� ���� ��� ������ �����.\n"
+"������ �� ������������� �������� ���������;"
+
+#: ../install_steps_interactive.pm_.c:675
+msgid "Sorry, no floppy drive available"
+msgstr "�������, ��� ������� ���������� ������ ���������"
+
+#: ../install_steps_interactive.pm_.c:678
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "�������� ����� ��������� ��� ���������� ��������� ���������"
+
+#: ../install_steps_interactive.pm_.c:683
+#, c-format
+msgid "Insert a floppy in drive %s"
+msgstr "�������� �������� ���� ����� %s"
+
+#: ../install_steps_interactive.pm_.c:684
+#: ../install_steps_interactive.pm_.c:1042
+msgid "Creating bootdisk"
+msgstr "���������� ������ ���������"
+
+#: ../install_steps_interactive.pm_.c:691
+msgid "Preparing bootloader"
+msgstr "������������ ������������ ���������"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of boot partition"
+msgstr "������ ������ ��� ���������� ���������"
+
+#: ../install_steps_interactive.pm_.c:703
+msgid "First sector of drive (MBR)"
+msgstr "������ ������ ��� ������ (MBR)"
+
+#: ../install_steps_interactive.pm_.c:708
+msgid "LILO Installation"
+msgstr "����������� LILO"
+
+#: ../install_steps_interactive.pm_.c:709
+msgid "Where do you want to install the bootloader?"
+msgstr "��� ������ �� ������������� �� ��������� ���������;"
+
+#: ../install_steps_interactive.pm_.c:715
+msgid "Do you want to use LILO?"
+msgstr "������ �� ��������������� �� LILO;"
+
+#: ../install_steps_interactive.pm_.c:718
+msgid "Boot device"
+msgstr "������� ���������"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "Linear (needed for some SCSI drives)"
+msgstr "�������� (���������� �� �������� SCSI �������)"
+
+#: ../install_steps_interactive.pm_.c:719
+msgid "linear"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "Compact"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:720
+msgid "compact"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:721
+msgid "Delay before booting default image"
+msgstr "����������� ���� ��� ��������"
+
+#: ../install_steps_interactive.pm_.c:722
+msgid "Video mode"
+msgstr "������� ������"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "Restrict command line options"
+msgstr "���������� �������� ������� �������"
+
+#: ../install_steps_interactive.pm_.c:726
+msgid "restrict"
+msgstr "����������"
+
+#: ../install_steps_interactive.pm_.c:732
+msgid "LILO main options"
+msgstr "������� �������� LILO"
+
+#: ../install_steps_interactive.pm_.c:735
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"� ������� ``���������� �������� ������� �������'' ����� ������� ����� "
+"�����������"
+
+#: ../install_steps_interactive.pm_.c:746
+msgid ""
+"Here are the following entries in LILO.\n"
+"You can add some more or change the existing ones."
+msgstr ""
+"�������� �� ��������� �������� ��� LILO.\n"
+"�������� �� ���������� �� ����� � �� �������� ��� ����������."
+
+#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
+msgid "Add"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Linux"
+msgstr "Linux"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Other OS (windows...)"
+msgstr "���� ����������� (windows...)"
+
+#: ../install_steps_interactive.pm_.c:757
+msgid "Which type of entry do you want to add"
+msgstr "�� ����� ������� ������ �� ����������"
+
+#: ../install_steps_interactive.pm_.c:777
+msgid "Image"
+msgstr "Image"
+
+#: ../install_steps_interactive.pm_.c:778
+#: ../install_steps_interactive.pm_.c:786
+msgid "Root"
+msgstr "Root"
+
+#: ../install_steps_interactive.pm_.c:779
+msgid "Append"
+msgstr "Append"
+
+#: ../install_steps_interactive.pm_.c:780
+msgid "Initrd"
+msgstr "Initrd"
+
+#: ../install_steps_interactive.pm_.c:781
+msgid "Read-write"
+msgstr "Read-write"
+
+#: ../install_steps_interactive.pm_.c:787
+msgid "Table"
+msgstr "�������"
+
+#: ../install_steps_interactive.pm_.c:788
+msgid "Unsafe"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:793
+msgid "Label"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:795
+msgid "Default"
+msgstr "������� ��' �������"
+
+#: ../install_steps_interactive.pm_.c:798
+msgid "Remove entry"
+msgstr "�������� ��������"
+
+#: ../install_steps_interactive.pm_.c:801
+msgid "Empty label not allowed"
+msgstr "��� ����������� ����� ��������"
+
+#: ../install_steps_interactive.pm_.c:802
+msgid "This label is already in use"
+msgstr "���� � �������� ������� ���"
+
+#: ../install_steps_interactive.pm_.c:803
+#, c-format
+msgid "A entry %s already exists"
+msgstr "� ������� %s ������� ���"
+
+#: ../install_steps_interactive.pm_.c:817
+msgid "Installation of LILO failed. The following error occured:"
+msgstr "� ����������� ��� LILO �������. ���������� �� �������� ������:"
+
+#: ../install_steps_interactive.pm_.c:831
+msgid "Proxies configuration"
+msgstr "��������� proxy"
+
+#: ../install_steps_interactive.pm_.c:832
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
+
+#: ../install_steps_interactive.pm_.c:833
+msgid "FTP proxy"
+msgstr "FTP proxy"
+
+#: ../install_steps_interactive.pm_.c:839
+msgid "Proxy should be http://..."
+msgstr "� proxy ������ �� ����� http://..."
+
+#: ../install_steps_interactive.pm_.c:840
+msgid "Proxy should be ftp://..."
+msgstr "� proxy ������ �� ����� ftp://..."
+
+#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
+msgid "Welcome To Crackers"
+msgstr "����� ������ ����� Crackers"
+
+#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
+msgid "Poor"
+msgstr "�����"
+
+#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
+msgid "Low"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
+msgid "Medium"
+msgstr "������"
+
+#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
+msgid "High"
+msgstr "�����"
+
+#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
+msgid "Paranoid"
+msgstr "���������"
+
+#: ../install_steps_interactive.pm_.c:868
+msgid "Miscellaneous questions"
+msgstr "�������� ���������"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "(may cause data corruption)"
+msgstr "(������ �� ���������� ���������� ���������"
+
+#: ../install_steps_interactive.pm_.c:869
+msgid "Use hard drive optimisations?"
+msgstr "�� ������������� ���������������� ���� ������ �����;"
+
+#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
+msgid "Choose security level"
+msgstr "�������� ������� ���������"
+
+#: ../install_steps_interactive.pm_.c:871
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "������� ��������� ������ �� ���������� (��� ��������� %d MB)"
+
+#: ../install_steps_interactive.pm_.c:872
+msgid "Removable media automounting"
+msgstr "�������� ������� ����������� ������� �����������"
+
+#: ../install_steps_interactive.pm_.c:874
+msgid "Enable num lock at startup"
+msgstr "������������ num lock ���� ��� ��������"
+
+#: ../install_steps_interactive.pm_.c:877
+msgid "Give the ram size in Mb"
+msgstr "�������� ������� ������ �� Mb"
+
+#: ../install_steps_interactive.pm_.c:893
+msgid "Use existing configuration for X11?"
+msgstr "�� ������������� ��� ���������� ��������� ��� �� �11;"
+
+#: ../install_steps_interactive.pm_.c:905
+#: ../install_steps_interactive.pm_.c:1075
+msgid "Try to find PCI devices?"
+msgstr "�� �������� �������� ��������� �������� PCI;"
+
+#: ../install_steps_interactive.pm_.c:920
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"������ ������ ��� �������������.\n"
+"\n"
+"������ ������� �� ������������� ����;"
+
+#: ../install_steps_interactive.pm_.c:927
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"For information on fixes which are available for this release of "
+"Linux-Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux-Mandrake User's Guide."
+msgstr ""
+"������������, � ����������� ������������.\n"
+"��������� ��� �������� � �� CD ��������� ��� ������� return ��� "
+"������������.\n"
+"\n"
+"��� ����������� ������� �� ���������� ����� ��� ������� ��� Mandrake Linux,\n"
+"�������������� ��� ������ http://www.linux-mandrake.com/.\n"
+"\n"
+"����������� ������� �� ��� ��������� ��� ���������� ��� �������� ��� "
+"�������\n"
+"�������� ��� �������� ������ ������ ��� Linux-Mandrake."
+
+#: ../install_steps_interactive.pm_.c:936
+msgid "Shutting down"
+msgstr "��������"
+
+#: ../install_steps_interactive.pm_.c:950
+#, c-format
+msgid "Installing driver for %s card %s"
+msgstr "����������� ������ ��� %s ����� %s"
+
+#: ../install_steps_interactive.pm_.c:951
+#, c-format
+msgid "(module %s)"
+msgstr "(module %s)"
+
+#: ../install_steps_interactive.pm_.c:961
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "����� %s ����� �� ��������;"
+
+#: ../install_steps_interactive.pm_.c:969
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+"�� ������� �����������, � %s ������ ���������� �������� ����������� ���\n"
+"�� ������������ �����, ���' ��� ��� ������� ���������� ��� ����� �����.\n"
+"�� ������ �� ������ �������� �������� � �� ������� ��� ����� �� ��������\n"
+"�� ����� ��� ��� ��� ����������� ��� ����������; � ������� ���� ����\n"
+"���������� ������� ��� ����������, ���� ��� �� ���������� �����."
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Autoprobe"
+msgstr "�������� �������"
+
+#: ../install_steps_interactive.pm_.c:974
+msgid "Specify options"
+msgstr "������������� ����������"
+
+#: ../install_steps_interactive.pm_.c:978
+#, c-format
+msgid "You may now provide its options to module %s."
+msgstr "�������� ���� �� ������ ����������� ��� ��� ����� %s"
+
+#: ../install_steps_interactive.pm_.c:984
+#, c-format
+msgid ""
+"You may now provide its options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"�������� ���� �� ������ ��� ����������� ��� ��� ����� %s.\n"
+"�� ���������� ����� ��� ����� ``�����=���� �����2=����2 ...''.\n"
+"��� ����������, ``io=0x300 irq=7''"
+
+#: ../install_steps_interactive.pm_.c:987
+msgid "Module options:"
+msgstr "���������� ������"
+
+#: ../install_steps_interactive.pm_.c:997
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"� ������� ��� ������ %s �������.\n"
+"������ �� ���������� ���� �� ������������ �����������;"
+
+#: ../install_steps_interactive.pm_.c:1010
+msgid "Try to find PCMCIA cards?"
+msgstr "�� �������� �� �������� ������ PCMCIA"
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "Configuring PCMCIA cards..."
+msgstr "������� ������ PCMCIA "
+
+#: ../install_steps_interactive.pm_.c:1011
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../install_steps_interactive.pm_.c:1018
+msgid ""
+"Linux does not yet fully support ultra dma 66 HPT.\n"
+"As a work-around i can make a custom floppy giving access the hard drive on "
+"ide2 and ide3"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1039
+#, fuzzy
+msgid ""
+"Enter a floppy to create an HTP enabled boot\n"
+"(all data on floppy will be lost)"
+msgstr ""
+"�������� ��� �������� ���� ����� ���������\n"
+"��� �� �������� �� ���� �� �������� �� ������"
+
+#: ../install_steps_interactive.pm_.c:1056
+msgid "It is necessary to restart installation booting on the floppy"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1057
+msgid "It is necessary to restart installation with the new parameters"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1061
+#, c-format
+msgid ""
+"Failed to create an HTP boot floppy.\n"
+"You may have to restart installation and give ``%s'' at the prompt"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:1081
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr "����� %s %s ������������"
+
+#: ../install_steps_interactive.pm_.c:1082
+msgid "Do you have another one?"
+msgstr "����� �����;"
+
+#: ../install_steps_interactive.pm_.c:1083
+#, c-format
+msgid "Do you have any %s interface?"
+msgstr "����� ������� ����������� %s;"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
+msgid "No"
+msgstr "���"
+
+#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
+#: ../my_gtk.pm_.c:424
+msgid "Yes"
+msgstr "���"
+
+#: ../install_steps_interactive.pm_.c:1086
+msgid "See hardware info"
+msgstr "������� ����������� ������"
+
+#: ../install_steps_newt.pm_.c:19
+#, c-format
+msgid "Linux-Mandrake Installation %s"
+msgstr "����������� Linux-Mandrake %s"
+
+#: ../install_steps_newt.pm_.c:30
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr ""
+" <Tab>/<Alt-Tab> ������ ������ | <Space> ������� | <F12> ������� ��. "
+
+#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
+#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
+#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
+msgid "Cancel"
+msgstr "�������"
+
+#: ../interactive.pm_.c:181
+msgid "Please wait"
+msgstr "�������� ����������"
+
+#: ../interactive_stdio.pm_.c:35
+#, c-format
+msgid "Ambiguity (%s), be more precise\n"
+msgstr "�������� (%s), �������� ������������ ��������\n"
+
+#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
+#: ../interactive_stdio.pm_.c:70
+msgid "Bad choice, try again\n"
+msgstr "���� �������, �������������\n"
+
+#: ../interactive_stdio.pm_.c:39
+#, c-format
+msgid " ? (default %s) "
+msgstr " ; (��' ������� %s) "
+
+#: ../interactive_stdio.pm_.c:52
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "� ������� ���; (��' ������� %s)"
+
+#: ../interactive_stdio.pm_.c:71
+#, c-format
+msgid "Your choice? (default %s enter `none' for none) "
+msgstr "� ������� ���; (��' ������� %s �������� `none' ��� ������) "
+
+#: ../keyboard.pm_.c:88
+msgid "Armenian"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:89
+msgid "Belgian"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:90
+msgid "Bulgarian"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:91
+msgid "Brazilian"
+msgstr "������������"
+
+#: ../keyboard.pm_.c:92
+msgid "Swiss (French layout)"
+msgstr "�������� (������� ����������)"
+
+#: ../keyboard.pm_.c:93
+msgid "Swiss (German layout)"
+msgstr "�������� (��������� ����������)"
+
+#: ../keyboard.pm_.c:94
+msgid "Czech"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:95
+msgid "German"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:96
+msgid "Danish"
+msgstr "������"
+
+#: ../keyboard.pm_.c:97
+msgid "Dvorak"
+msgstr "Dvorak"
+
+#: ../keyboard.pm_.c:98
+msgid "Estonian"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:99
+msgid "Spanish"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:100
+msgid "Finnish"
+msgstr "����������"
+
+#: ../keyboard.pm_.c:101
+msgid "French"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:102
+msgid "Georgian (\"Russian\" layout)"
+msgstr "������� (\"������\" ����������)"
+
+#: ../keyboard.pm_.c:103
+msgid "Georgian (\"Latin\" layout)"
+msgstr "������� (\"��������\" ����������)"
+
+#: ../keyboard.pm_.c:104
+msgid "Greek"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:105
+msgid "Hungarian"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:106
+msgid "Israeli"
+msgstr "������"
+
+#: ../keyboard.pm_.c:107
+msgid "Israeli (Phonetic)"
+msgstr "������ (��������)"
+
+#: ../keyboard.pm_.c:108
+msgid "Icelandic"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:109
+msgid "Italian"
+msgstr "�������"
+
+#: ../keyboard.pm_.c:110
+msgid "Latin American"
+msgstr "��������� ��������"
+
+#: ../keyboard.pm_.c:111
+msgid "Dutch"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:112
+msgid "Lithuanian AZERTY"
+msgstr "���������� AZERTY"
+
+#: ../keyboard.pm_.c:113
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "���������� \"number row\" QWERTY"
+
+#: ../keyboard.pm_.c:114
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "���������� \"��������\" QWERTY"
+
+#: ../keyboard.pm_.c:115
+msgid "Norwegian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:116
+#, fuzzy
+msgid "Polish (qwerty layout)"
+msgstr "�������� (��������� ����������)"
+
+#: ../keyboard.pm_.c:117
+#, fuzzy
+msgid "Polish (qwertz layout)"
+msgstr "�������� (��������� ����������)"
+
+#: ../keyboard.pm_.c:118
+msgid "Portuguese"
+msgstr "������������"
+
+#: ../keyboard.pm_.c:119
+msgid "Canadian (Quebec)"
+msgstr "�������� (������)"
+
+#: ../keyboard.pm_.c:120
+msgid "Russian"
+msgstr "������"
+
+#: ../keyboard.pm_.c:121
+msgid "Russian (Yawerty)"
+msgstr "������ (Yawerty)"
+
+#: ../keyboard.pm_.c:122
+msgid "Swedish"
+msgstr "��������"
+
+#: ../keyboard.pm_.c:123
+msgid "Slovenian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:124
+msgid "Slovakian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:125
+msgid "Thai keyboard"
+msgstr "Thai"
+
+#: ../keyboard.pm_.c:126
+msgid "Turkish (traditional \"F\" model)"
+msgstr "�������� (����������� \"F\" �������)"
+
+#: ../keyboard.pm_.c:127
+msgid "Turkish (modern \"Q\" model)"
+msgstr "�������� (�������� \"Q\" �������)"
+
+#: ../keyboard.pm_.c:128
+msgid "Ukrainian"
+msgstr "���������"
+
+#: ../keyboard.pm_.c:129
+msgid "UK keyboard"
+msgstr "������ ��������� (UK)"
+
+#: ../keyboard.pm_.c:130
+msgid "US keyboard"
+msgstr "�.�.�. (US)"
+
+#: ../keyboard.pm_.c:131
+msgid "US keyboard (international)"
+msgstr "US �������"
+
+#: ../keyboard.pm_.c:132
+msgid "Yugoslavian (latin layout)"
+msgstr "�������������� (�������� ����������)"
+
+#: ../lilo.pm_.c:145
+#, c-format
+msgid ""
+"Welcome to LILO the operating system chooser!\n"
+"\n"
+"To list the possible choices, press <TAB>.\n"
+"\n"
+"To load one of them, write its name and press <ENTER> or wait %d seconds for "
+"default boot.\n"
+"\n"
+msgstr ""
+"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS LILO!\n"
+"\n"
+"GIA NA DEITE TIS DIATHESIMES EPILOGES, PATHSTE <TAB>.\n"
+"\n"
+"GIA NA EPILEXETE MIA APO AUTES PLHKTROLOGHSTE TO ONOMA THS KAI \n"
+"PATHSTE <ENTER>, H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH \n"
+"EPILOGH.\n"
+"\n"
+
+#: ../mouse.pm_.c:20
+msgid "No Mouse"
+msgstr "����� �������"
+
+#: ../mouse.pm_.c:21
+msgid "Microsoft Rev 2.1A or higher (serial)"
+msgstr "Microsoft Rev 2.1A � ������� (��������)"
+
+#: ../mouse.pm_.c:22
+msgid "Logitech CC Series (serial)"
+msgstr "Logitech CC Series (��������)"
+
+#: ../mouse.pm_.c:23
+msgid "Logitech MouseMan+/FirstMouse+ (serial)"
+msgstr "Logitech MouseMan+/FirstMouse+ (��������)"
+
+#: ../mouse.pm_.c:24
+msgid "ASCII MieMouse (serial)"
+msgstr "ASCII MieMouse (��������)"
+
+#: ../mouse.pm_.c:25
+msgid "Genius NetMouse (serial)"
+msgstr "Genius NetMouse (��������)"
+
+#: ../mouse.pm_.c:26
+msgid "Microsoft IntelliMouse (serial)"
+msgstr "Microsoft IntelliMouse (��������)"
+
+#: ../mouse.pm_.c:27
+msgid "MM Series (serial)"
+msgstr "MM Series (��������)"
+
+#: ../mouse.pm_.c:28
+msgid "MM HitTablet (serial)"
+msgstr "MM HitTablet (��������)"
+
+#: ../mouse.pm_.c:29
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (��������, ������ C7 �����)"
+
+#: ../mouse.pm_.c:30
+msgid "Logitech MouseMan/FirstMouse (serial)"
+msgstr "Logitech MouseMan/FirstMouse (��������)"
+
+#: ../mouse.pm_.c:31
+msgid "Generic Mouse (serial)"
+msgstr "������� ����� (��������)"
+
+#: ../mouse.pm_.c:32
+msgid "Microsoft compatible (serial)"
+msgstr "Microsoft ������� (��������)"
+
+#: ../mouse.pm_.c:33
+msgid "Generic 3 Button Mouse (serial)"
+msgstr "������� ����� �� 3 ������� (��������)"
+
+#: ../mouse.pm_.c:34
+msgid "Mouse Systems (serial)"
+msgstr "Mouse Systems (��������)"
+
+#: ../mouse.pm_.c:35
+msgid "Generic Mouse (PS/2)"
+msgstr "������� ����� (PS/2)"
+
+#: ../mouse.pm_.c:36
+msgid "Logitech MouseMan/FirstMouse (ps/2)"
+msgstr "Logitech MouseMan/FirstMouse (ps/2)"
+
+#: ../mouse.pm_.c:37
+msgid "Generic 3 Button Mouse (PS/2)"
+msgstr "������� ����� �� 3 ������� (PS/2)"
+
+#: ../mouse.pm_.c:38
+msgid "ALPS GlidePoint (PS/2)"
+msgstr "ALPS GlidePoint (PS/2)"
+
+#: ../mouse.pm_.c:39
+msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
+msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)"
+
+#: ../mouse.pm_.c:40
+msgid "Kensington Thinking Mouse (PS/2)"
+msgstr "Kensington Thinking Mouse (PS/2)"
+
+#: ../mouse.pm_.c:41
+msgid "ASCII MieMouse (PS/2)"
+msgstr "ASCII MieMouse (PS/2)"
+
+#: ../mouse.pm_.c:42
+msgid "Genius NetMouse (PS/2)"
+msgstr "Genius NetMouse (PS/2)"
+
+#: ../mouse.pm_.c:43
+msgid "Genius NetMouse Pro (PS/2)"
+msgstr "Genius NetMouse Pro (PS/2)"
+
+#: ../mouse.pm_.c:44
+msgid "Genius NetScroll (PS/2)"
+msgstr "Genius NetScroll (PS/2)"
+
+#: ../mouse.pm_.c:45
+msgid "Microsoft IntelliMouse (PS/2)"
+msgstr "Microsoft IntelliMouse (PS/2)"
+
+#: ../mouse.pm_.c:46
+msgid "ATI Bus Mouse"
+msgstr "ATI Bus Mouse"
+
+#: ../mouse.pm_.c:47
+msgid "Microsoft Bus Mouse"
+msgstr "Microsoft Bus Mouse"
+
+#: ../mouse.pm_.c:48
+msgid "Logitech Bus Mouse"
+msgstr "Logitech Bus Mouse"
+
+#: ../mouse.pm_.c:49
+msgid "USB Mouse"
+msgstr "USB Mouse"
+
+#: ../mouse.pm_.c:50
+msgid "USB Mouse (3 buttons or more)"
+msgstr "USB Mouse (3 � ����������� �������)"
+
+#: ../partition_table.pm_.c:486
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+"������� ��� ���� ���� ������ ����������� �� ��� ����� �� �� �������������.\n"
+"� �������� ���� ����� �� ������������ ��� ����������� ����������� ��� ���� "
+"���� �� ���� �� ������ ����� ���� ���������� ���������"
+
+#: ../partition_table.pm_.c:572
+#, c-format
+msgid "Error reading file %s"
+msgstr "������ ���� ��� �������� ��� ������� %s"
+
+#: ../partition_table.pm_.c:579
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "� ��������� ��� �� ������ %s �������: %s"
+
+#: ../partition_table.pm_.c:581
+msgid "Bad backup file"
+msgstr "������������ �������� ������"
+
+#: ../partition_table.pm_.c:602
+#, c-format
+msgid "Error writing to file %s"
+msgstr "������ �������� ��� ������ %s"
+
+#: ../placeholder.pm_.c:5
+#, fuzzy
+msgid "Show less"
+msgstr "�������� ����"
+
+#: ../placeholder.pm_.c:6
+msgid "Show more"
+msgstr ""
+
+#: ../printer.pm_.c:244
+msgid "Local printer"
+msgstr "������� ���������"
+
+#: ../printer.pm_.c:245
+msgid "Remote lpd"
+msgstr "���������������� lpd"
+
+#: ../printer.pm_.c:246
+msgid "SMB/Windows 95/98/NT"
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../printer.pm_.c:247
+msgid "NetWare"
+msgstr "NetWare"
+
+#: ../printerdrake.pm_.c:75
+msgid "Local Printer Options"
+msgstr "�������� ������� ��������"
+
+#: ../printerdrake.pm_.c:76
+msgid ""
+"Every print queue (which print jobs are directed to) needs a\n"
+"name (often lp) and a spool directory associated with it. What\n"
+"name and directory should be used for this queue?"
+msgstr ""
+"���� ���� �������� (���� ����� ���������� �� ����������) ����������\n"
+"��� ����� (����� lp) ��� ���� ��������. �� ����� ��� �������� �� \n"
+"����� �� ����� ��� ���� ��������;"
+
+#: ../printerdrake.pm_.c:79
+msgid "Name of queue:"
+msgstr "����� �����:"
+
+#: ../printerdrake.pm_.c:79
+msgid "Spool directory:"
+msgstr "���������:"
+
+#: ../printerdrake.pm_.c:90
+msgid "Select Printer Connection"
+msgstr "������ �������� ��������"
+
+#: ../printerdrake.pm_.c:91
+msgid "How is the printer connected?"
+msgstr "��� ����� ������������ � ��������� ���;"
+
+#: ../printerdrake.pm_.c:99
+msgid "Detecting devices..."
+msgstr "���������� ��������..."
+
+#: ../printerdrake.pm_.c:99
+msgid "Test ports"
+msgstr "������ �����"
+
+#: ../printerdrake.pm_.c:112
+#, c-format
+msgid "A printer, model \"%s\", has been detected on "
+msgstr "���� ��������� ����� \"%s\" ����������� ��� "
+
+#: ../printerdrake.pm_.c:119
+msgid "Local Printer Device"
+msgstr "������� ������� ��������"
+
+#: ../printerdrake.pm_.c:120
+msgid ""
+"What device is your printer connected to \n"
+"(note that /dev/lp0 is equivalent to LPT1:)?\n"
+msgstr ""
+"�� ���� ������� ����� ������������ � ��������� ���;\n"
+"(��������: �� /dev/lp0 ����������� ��� LPT1:)\n"
+
+#: ../printerdrake.pm_.c:121
+msgid "Printer Device:"
+msgstr "������� ��������"
+
+#: ../printerdrake.pm_.c:125
+msgid "Remote lpd Printer Options"
+msgstr "�������� ���������������� lpd ��������"
+
+#: ../printerdrake.pm_.c:126
+msgid ""
+"To use a remote lpd print queue, you need to supply\n"
+"the hostname of the printer server and the queue name\n"
+"on that server which jobs should be placed in."
+msgstr ""
+"��� �� ��������������� ��� ��������������� ���� ���������\n"
+"lpd, ������ �� ������ �� �������� ����� ��� ����������� \n"
+"����������, ����� ��� �� ����� ��� ����� ��� ����� �� \n"
+"��������������� �� ����� ��� �����������."
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote hostname:"
+msgstr "�������� �����:"
+
+#: ../printerdrake.pm_.c:129
+msgid "Remote queue"
+msgstr "����� ���������������� �����"
+
+#: ../printerdrake.pm_.c:134
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "�������� �������� SMB (Windows 9x/NT)"
+
+#: ../printerdrake.pm_.c:135
+msgid ""
+"To print to a SMB printer, you need to provide the\n"
+"SMB host name (Note! It may be different from its\n"
+"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
+"well as the share name for the printer you wish to access and any\n"
+"applicable user name, password, and workgroup information."
+msgstr ""
+"��� �� ���������� �� ���� SMB ��������, ������ �� ������ �� \n"
+"SMB �������� ����� (��������! ������ �� ����� ����������� ��� \n"
+"�� �������� ����� TCP/IP!) ��� ���� ��� ��� ��������� IP ��� \n"
+"����������� ����������, �� ����� ��� �������� ���� ����� ���������� \n"
+"��������, ����� ��� ����������� ���������� ���������� ���� ������� \n"
+"������, ����� ������ ��� ����� � ������ ��������."
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server IP:"
+msgstr "IP ��������� SMB �����������:"
+
+#: ../printerdrake.pm_.c:140
+msgid "SMB server host:"
+msgstr "�������� ����� SMB �����������:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "Password:"
+msgstr "���� ������:"
+
+#: ../printerdrake.pm_.c:141
+msgid "Share name:"
+msgstr "����� ��������:"
+
+#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
+msgid "User name:"
+msgstr "������� ������:"
+
+#: ../printerdrake.pm_.c:142
+msgid "Workgroup:"
+msgstr "����� ��������:"
+
+#: ../printerdrake.pm_.c:157
+msgid "NetWare Printer Options"
+msgstr "�������� �������� NetWare"
+
+#: ../printerdrake.pm_.c:158
+msgid ""
+"To print to a NetWare printer, you need to provide the\n"
+"NetWare print server name (Note! it may be different from its\n"
+"TCP/IP hostname!) as well as the print queue name for the printer you\n"
+"wish to access and any applicable user name and password."
+msgstr ""
+"��� �� ���������� �� ���� �������� NetWare, ������ �� ������\n"
+"�� ����� ��� ����������� ���������� NetWare (��������! ������\n"
+"�� ����� ����������� ��� �� �������� ����� TCP/IP!), \n"
+"�� ����� ��� �������� ���� ����� ���������� ��������, ����� ���\n"
+"����������� ���������� ���������� ���� ������� ������ ��� ����� ������."
+
+#: ../printerdrake.pm_.c:162
+msgid "Print Queue Name:"
+msgstr "����� ����� ��������:"
+
+#: ../printerdrake.pm_.c:162
+msgid "Printer Server:"
+msgstr "������������ ����������:"
+
+#: ../printerdrake.pm_.c:173
+msgid "Yes, print ASCII test page"
+msgstr "���, ������ ����������� ������ ASCII"
+
+#: ../printerdrake.pm_.c:174
+msgid "Yes, print PostScript test page"
+msgstr "���, ������ ����������� ������ PostScrip"
+
+#: ../printerdrake.pm_.c:175
+msgid "Yes, print both test pages"
+msgstr "���, ������ ��� ��� ��� ������������ �������"
+
+#: ../printerdrake.pm_.c:183
+msgid "Configure Printer"
+msgstr "������� ��������"
+
+#: ../printerdrake.pm_.c:184
+msgid "What type of printer do you have?"
+msgstr "�� ����� �������� �����;"
+
+#: ../printerdrake.pm_.c:204
+msgid "Printer options"
+msgstr "�������� ��������"
+
+#: ../printerdrake.pm_.c:205
+msgid "Paper Size"
+msgstr "������� �������"
+
+#: ../printerdrake.pm_.c:206
+msgid "Eject page after job?"
+msgstr "������� ������� �� �� ����� ��� ���������;"
+
+#: ../printerdrake.pm_.c:209
+msgid "Fix stair-stepping text?"
+msgstr "�������� ��������-������;"
+
+#: ../printerdrake.pm_.c:212
+msgid "Uniprint driver options"
+msgstr "�������� ������ Uniprint"
+
+#: ../printerdrake.pm_.c:213
+msgid "Color depth options"
+msgstr "�������� ������ ��������"
+
+#: ../printerdrake.pm_.c:223
+msgid "Do you want to test printing?"
+msgstr "������ �� ���������� ��� ��������;"
+
+#: ../printerdrake.pm_.c:234
+msgid "Printing test page(s)..."
+msgstr "�������� ������������ �������..."
+
+#: ../printerdrake.pm_.c:252
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+"Does it work properly?"
+msgstr ""
+"��� � ������������ ������������ ������� ��������� ���� ��������.\n"
+"������ �� ������� ������� ������ ����� � �������� �� ���������.\n"
+"��������� ���������:\n"
+"%s\n"
+"\n"
+"����� ����� � ��������"
+
+#: ../printerdrake.pm_.c:256
+msgid ""
+"Test page(s) have been sent to the printer daemon.\n"
+"This may take a little time before printer start.\n"
+"Does it work properly?"
+msgstr ""
+"��� � ������������ ������������ ������� ��������� ���� ��������.\n"
+"������ �� ������� ������� ������ ����� � �������� �� ���������.\n"
+"����� ����� � ��������;"
+
+#: ../raid.pm_.c:36
+#, c-format
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "��� ����� �� �������� ��������� ��� _�������������_ RAID md%d"
+
+#: ../raid.pm_.c:106
+msgid "Can't write file $file"
+msgstr "��� ����� �� ���������� �� ������ $file"
+
+#: ../raid.pm_.c:146
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "��� �������� ������� ����������� ��� RAID �������� %d\n"
+
+#: ../standalone/draksec_.c:28
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive: it must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"���� �� ������� ������ �� �������������� �� �������. ����� �� ������� ���\n"
+"��� ������������, ���� ���� ���������. ��� ������ �� �������������� �� "
+"�������\n"
+"����������� ��� Internet � LAN. ��� �������� ������ �������."
+
+#: ../standalone/draksec_.c:31
+msgid ""
+"Password are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"���� �������� ������ �������, ���� � ����� ��� ���������� �� ������ \n"
+"��� ����������."
+
+#: ../standalone/draksec_.c:32
+msgid ""
+"Few improvements for this security level, the main one is that there are\n"
+"more security warnings and checks."
+msgstr ""
+"����� ���������� ���������, � ����� ����� ��� �������� ������������ \n"
+"��������������� ��� �������."
+
+#: ../standalone/draksec_.c:34
+msgid ""
+"This is the standard security recommended for a computer that will be used\n"
+"to connect to the Internet as a client. There are now security checks. "
+msgstr ""
+"���� ����� �� ����������� ������� ��������� ��� ��� ������� ��� �� ��������\n"
+"�� ������� ��� Internet. �������� ���� ������� ���������."
+
+#: ../standalone/draksec_.c:36
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which accept\n"
+"connections from many clients. "
+msgstr ""
+"�� ���� �� ������� ��������� ����� ������ � ����� ��� ���������� ��� \n"
+"Internet �� �����������. � �������� ����� ������ ����� ���� �� �������\n"
+"����������� ��������� ��� ������� �������."
+
+#: ../standalone/draksec_.c:39
+msgid ""
+"We take level 4 features, but now the system is entirely closed.\n"
+"Security features are at their maximum."
+msgstr ""
+"�������� �������� 4, �� �� ������� ������� �������. �������� \n"
+"��� ������� ������."
+
+#: ../standalone/draksec_.c:49
+msgid "Setting security level"
+msgstr "������� �������� ���������"
+
+#: ../standalone/drakxconf_.c:21
+msgid "Choose the tool you want to use"
+msgstr "�������� �� �������� ��� ������ �� ���������������"
+
+#: ../standalone/drakxservices_.c:21
+msgid "Choose which services should be automatically started at boot time"
+msgstr "�������� ����� ��������� �� �������� �������� ���� ��� ��������"
+
+#: ../standalone/mousedrake_.c:30
+msgid "no serial_usb found\n"
+msgstr "��� ������� serial_usb\n"
+
+#: ../standalone/mousedrake_.c:35
+msgid "Emulate third button?"
+msgstr "��������� ������ ��������;"
+
+#: ../standalone/rpmdrake_.c:25
+#, fuzzy
+msgid "reading configuration"
+msgstr "������ ���������"
+
+#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
+#: ../standalone/rpmdrake_.c:253
+msgid "File"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
+#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
+msgid "Search"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
+#, fuzzy
+msgid "Package"
+msgstr "����� ������"
+
+#: ../standalone/rpmdrake_.c:51
+#, fuzzy
+msgid "Text"
+msgstr "�������"
+
+#: ../standalone/rpmdrake_.c:53
+#, fuzzy
+msgid "Tree"
+msgstr "��������"
+
+#: ../standalone/rpmdrake_.c:54
+msgid "Sort by"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:55
+msgid "Category"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:58
+#, fuzzy
+msgid "See"
+msgstr "������������ �������"
+
+#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Installed packages"
+msgstr "����������� ������� %s"
+
+#: ../standalone/rpmdrake_.c:60
+#, fuzzy
+msgid "Available packages"
+msgstr "����� ��� ��������� ������"
+
+#: ../standalone/rpmdrake_.c:62
+msgid "Show only leaves"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:67
+msgid "Expand all"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:68
+#, fuzzy
+msgid "Collapse all"
+msgstr "���������� ����"
+
+#: ../standalone/rpmdrake_.c:70
+#, fuzzy
+msgid "Configuration"
+msgstr "������ ���������"
+
+#: ../standalone/rpmdrake_.c:71
+msgid "Add location of packages"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:75
+msgid "Update location"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
+#, fuzzy
+msgid "Remove"
+msgstr "�������� ��������"
+
+#: ../standalone/rpmdrake_.c:100
+msgid "Configuration: Add Location"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:101
+msgid "Expand Tree"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:102
+msgid "Collapse Tree"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:103
+#, fuzzy
+msgid "Find Package"
+msgstr "����� ������"
+
+#: ../standalone/rpmdrake_.c:104
+msgid "Find Package containing file"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:105
+msgid "Toggle between Installed and Available"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:139
+msgid "Files:\n"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
+#, fuzzy
+msgid "Uninstall"
+msgstr "�����������"
+
+#: ../standalone/rpmdrake_.c:163
+#, fuzzy
+msgid "Choose package to install"
+msgstr "������� �������"
+
+#: ../standalone/rpmdrake_.c:190
+msgid "Checking dependencies"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
+msgid "Wait"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:209
+#, fuzzy
+msgid "The following packages are going to be uninstalled"
+msgstr "������� �������"
+
+#: ../standalone/rpmdrake_.c:210
+#, fuzzy
+msgid "Uninstalling the RPMs"
+msgstr "����������� ������� %s"
+
+#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
+msgid "Regexp"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:229
+msgid "Which package are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+#, c-format
+msgid "%s not found"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
+#: ../standalone/rpmdrake_.c:278
+msgid "No more match"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:246
+msgid ""
+"rpmdrake is currently in ``low memory'' mode.\n"
+"I'm going to relaunch rpmdrake to allow searching files"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:253
+msgid "Which file are you looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:269
+msgid "What are looking for"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:289
+msgid "Give a name (eg: `extra', `commercial')"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:291
+#, fuzzy
+msgid "Directory"
+msgstr "������"
+
+#: ../standalone/rpmdrake_.c:294
+msgid "No cdrom available (nothing in /mnt/cdrom)"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:298
+msgid "URL of the directory containing the RPMs"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:299
+msgid ""
+"For FTP and HTTP, you need to give the location for hdlist\n"
+"It must be relative to the URL above"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:302
+msgid "Please submit the following information"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:304
+#, fuzzy, c-format
+msgid "%s is already in use"
+msgstr "���� � �������� ������� ���"
+
+#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
+#: ../standalone/rpmdrake_.c:329
+msgid "Updating the RPMs base"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:328
+#, fuzzy, c-format
+msgid "Going to remove entry %s"
+msgstr "�������� ��������"
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves"
+msgstr ""
+
+#: ../standalone/rpmdrake_.c:360
+msgid "Finding leaves takes some time"
+msgstr ""
+
+#~ msgid "Polish"
+#~ msgstr "��������"
+
+#~ msgid "Going to install %d MB. You can choose to install more programs"
+#~ msgstr ""
+#~ "�� ����������� %d MB. �������� �� ������������� ����������� �����������"