summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/da.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/da.po')
-rw-r--r--perl-install/share/po/da.po251
1 files changed, 165 insertions, 86 deletions
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
index b9de731e3..b8fa2c8b8 100644
--- a/perl-install/share/po/da.po
+++ b/perl-install/share/po/da.po
@@ -160,7 +160,8 @@ msgstr "Vent venligst, opsætter systemkonfigurationsfiler på USB-nøgle..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
-msgstr "Indtast dine brugeroplysninger, adgangskode vil blive brugt til pauseskærm"
+msgstr ""
+"Indtast dine brugeroplysninger, adgangskode vil blive brugt til pauseskærm"
#: ../move/move.pm:556
#, c-format
@@ -445,7 +446,8 @@ msgstr "Xorg %s med 3D hardware acceleration"
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Dit kort kan have 3D hardware accelerations-understøttelse med Xorg %s."
+msgstr ""
+"Dit kort kan have 3D hardware accelerations-understøttelse med Xorg %s."
#: Xconfig/card.pm:417
#, c-format
@@ -550,7 +552,8 @@ msgstr "Producent"
#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Undersøgning for Plug'n Play mislykkedes. Vælg venligst den rigtige skærm"
+msgstr ""
+"Undersøgning for Plug'n Play mislykkedes. Vælg venligst den rigtige skærm"
#: Xconfig/monitor.pm:135
#, c-format
@@ -678,7 +681,8 @@ msgstr "Ønsker du at afprøve konfigurationen?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Advarsel: afprøvning af dette grafikkort kan få din maskine til at fryse"
+msgstr ""
+"Advarsel: afprøvning af dette grafikkort kan få din maskine til at fryse"
#: Xconfig/test.pm:69
#, c-format
@@ -918,7 +922,8 @@ msgstr "Angiv RAM-størrelse i Mb"
#: any.pm:272
#, c-format
-msgid "Option ``Restrict command line options'' is of no use without a password"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
"en adgangskode"
@@ -1178,7 +1183,8 @@ msgstr "Indtast et brugernavn"
#: any.pm:609
#, c-format
-msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brugernavnet må kun indeholde små bogstaver, tal, `-' og `_'"
#: any.pm:610
@@ -1248,7 +1254,8 @@ msgstr "Autologin"
#: any.pm:685
#, c-format
msgid "I can set up your computer to automatically log on one user."
-msgstr "Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger på."
+msgstr ""
+"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger på."
#: any.pm:686 help.pm:51
#, c-format
@@ -1281,7 +1288,8 @@ msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
-msgstr "Du kan vælge andre sprog der vil være tilgængelige efter installationen"
+msgstr ""
+"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
#: any.pm:746 help.pm:647
#, c-format
@@ -1369,7 +1377,8 @@ msgstr ""
#: any.pm:941
#, c-format
-msgid "You can export using NFS or SMB. Please select which you would like to use."
+msgid ""
+"You can export using NFS or SMB. Please select which you would like to use."
msgstr "Du kan eksportere med NFS eller SMB. Hvilken vil du bruge"
#: any.pm:966
@@ -1438,7 +1447,8 @@ msgstr "Lokal fil:"
#: authentication.pm:51
#, c-format
-msgid "Use local for all authentication and information user tell in local file"
+msgid ""
+"Use local for all authentication and information user tell in local file"
msgstr ""
"Brug lokal for al autentificering og information, som bruger angiver i lokal "
"fil"
@@ -1493,8 +1503,10 @@ msgstr "Active Directory med SFU:"
#: authentication.pm:55 authentication.pm:56
#, c-format
-msgid "Kerberos is a secure system for providing network authentication services."
-msgstr "Kerberos er et sikkert system til at give netværksautentificeringstjenester."
+msgid ""
+"Kerberos is a secure system for providing network authentication services."
+msgstr ""
+"Kerberos er et sikkert system til at give netværksautentificeringstjenester."
#: authentication.pm:56
#, c-format
@@ -1651,7 +1663,8 @@ msgstr "Standard ldmap "
#: authentication.pm:165
#, c-format
msgid "Set administrator (root) password and network authentication methods"
-msgstr "Sæt administrator (root)-adgangskode og netværksautentifikationsmetoder"
+msgstr ""
+"Sæt administrator (root)-adgangskode og netværksautentifikationsmetoder"
#: authentication.pm:166
#, c-format
@@ -1672,7 +1685,8 @@ msgstr "Ingen adgangskode"
#: authentication.pm:178
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Denne adgangskode er for nemt at gætte (det skal mindst være på %d tegn)"
+msgstr ""
+"Denne adgangskode er for nemt at gætte (det skal mindst være på %d tegn)"
#: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634
#: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459
@@ -2340,8 +2354,10 @@ msgstr "Fjern loopback-filen?"
#: diskdrake/interactive.pm:590
#, c-format
-msgid "After changing type of partition %s, all data on this partition will be lost"
-msgstr "Efter type-ændring af partition %s vil alle data på denne partition gå tabt"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter type-ændring af partition %s vil alle data på denne partition gå tabt"
#: diskdrake/interactive.pm:602
#, c-format
@@ -2528,7 +2544,8 @@ msgstr "Partitionstabellen for disk %s vil nu blive skrevet på disken!"
#: diskdrake/interactive.pm:1096
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Efter formatering af partitionen %s vil alle data på denne partition gå tabt"
+msgstr ""
+"Efter formatering af partitionen %s vil alle data på denne partition gå tabt"
#: diskdrake/interactive.pm:1112
#, c-format
@@ -2762,7 +2779,8 @@ msgstr "Vælg din krypteringsnøgle for filsystemet"
#: diskdrake/interactive.pm:1269
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Denne krypteringsnøgle er for nem at gætte (skal mindst være på %d tegn)"
+msgstr ""
+"Denne krypteringsnøgle er for nem at gætte (skal mindst være på %d tegn)"
#: diskdrake/interactive.pm:1270
#, c-format
@@ -2807,7 +2825,8 @@ msgstr "En anden"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
-msgid "Please enter your username, password and domain name to access this host."
+msgid ""
+"Please enter your username, password and domain name to access this host."
msgstr ""
"Indtast venligst dit brugernavn, din adgangskode og dit domænenavn for at få "
"adgang til denne vært."
@@ -3308,7 +3327,7 @@ msgstr ""
"Her kan du vælge et alternativ drivprogram (enten OSS eller ALSA) for "
"lydkortet (%s)"
-#. -PO: here the first %s is either "OSS" or "ALSA",
+#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
@@ -6966,8 +6985,10 @@ msgstr ""
#: install_steps_interactive.pm:820
#, c-format
-msgid "Contacting Mandrakelinux web site to get the list of available mirrors..."
-msgstr "Kontakter Mandrakelinux netsted for at hente listen over tilgængelige spejle"
+msgid ""
+"Contacting Mandrakelinux web site to get the list of available mirrors..."
+msgstr ""
+"Kontakter Mandrakelinux netsted for at hente listen over tilgængelige spejle"
#: install_steps_interactive.pm:839
#, c-format
@@ -7098,7 +7119,8 @@ msgstr "Tjenester: %d aktiverede for %d registrerede"
#: install_steps_interactive.pm:1137
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Du har ikke konfigureret X. Er du sikker på at du virkelig ønsker dette?"
+msgstr ""
+"Du har ikke konfigureret X. Er du sikker på at du virkelig ønsker dette?"
#: install_steps_interactive.pm:1217
#, c-format
@@ -7196,8 +7218,10 @@ msgstr "Mandrakelinux Installation %s"
#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
-msgid " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> mellem elementer | <Space> vælger | <F12> næste skærm "
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr ""
+" <Tab>/<Alt-Tab> mellem elementer | <Space> vælger | <F12> næste skærm "
#: interactive.pm:184
#, c-format
@@ -10990,7 +11014,8 @@ msgstr "domæne der søges i"
#: network/netconnect.pm:1271
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
-msgstr "Som standard vil søge-domænet blive sat ud fra det fuldt angivne værtsnavn"
+msgstr ""
+"Som standard vil søge-domænet blive sat ud fra det fuldt angivne værtsnavn"
#: network/netconnect.pm:1272
#, c-format
@@ -11974,7 +11999,8 @@ msgstr "Fjern valgte server"
#: printer/printerdrake.pm:411
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "Indtast IP-adresse og port på værten, hvis printere du ønsker at bruge."
+msgstr ""
+"Indtast IP-adresse og port på værten, hvis printere du ønsker at bruge."
#: printer/printerdrake.pm:412
#, c-format
@@ -12092,7 +12118,8 @@ msgstr ""
#: printer/printerdrake.pm:621
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
+msgid ""
+"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""
"Automatisk identifikation af printere (Lokal, TCP/Socket,SMB-printere og URI "
"for enhed)"
@@ -12199,7 +12226,8 @@ msgstr ""
#: printer/printerdrake.pm:707
#, c-format
-msgid "There are no printers found which are directly connected to your machine"
+msgid ""
+"There are no printers found which are directly connected to your machine"
msgstr ""
"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
"maskine"
@@ -12481,7 +12509,8 @@ msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netværk"
#: printer/printerdrake.pm:1091
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Auto-opdagelse af printere tilsluttet maskiner der køre Microsoft Windows"
+msgstr ""
+"Auto-opdagelse af printere tilsluttet maskiner der køre Microsoft Windows"
#: printer/printerdrake.pm:1108
#, c-format
@@ -12624,7 +12653,8 @@ msgstr ""
#: printer/printerdrake.pm:1313
#, c-format
-msgid "Alternatively, you can specify a device name/file name in the input line"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr "Alternaltivt kan du angive et enhedsnavn/filnavn på inddatalinjen"
#: printer/printerdrake.pm:1314 printer/printerdrake.pm:1323
@@ -14414,7 +14444,8 @@ msgstr "Vís alle tilgængelige eksterne CUPS-printere"
#: printer/printerdrake.pm:4705
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
+msgstr ""
+"Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
#: printer/printerdrake.pm:4716
#, c-format
@@ -14595,12 +14626,14 @@ msgstr "Skannerdrake"
#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "Kunne ikke installere de nødvendige pakker til deling af dine skannere."
+msgstr ""
+"Kunne ikke installere de nødvendige pakker til deling af dine skannere."
#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Dinne skannere vil ikke være tilgængelige for brugere, der ikke er root."
+msgstr ""
+"Dinne skannere vil ikke være tilgængelige for brugere, der ikke er root."
#: security/help.pm:11
#, c-format
@@ -14806,7 +14839,8 @@ msgstr "Aktivér/deaktivér msec timevise sikkerhedskontrol."
#: security/help.pm:90
#, c-format
-msgid " Enabling su only from members of the wheel group or allow su from any user."
+msgid ""
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
"Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
"enhver bruger."
@@ -14848,7 +14882,8 @@ msgstr ""
#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
-msgstr "Sæt længden på adgangskodehistorik for at forhindre genbrug af adgangskoder."
+msgstr ""
+"Sæt længden på adgangskodehistorik for at forhindre genbrug af adgangskoder."
#: security/help.pm:106
#, c-format
@@ -14891,12 +14926,14 @@ msgstr ""
#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
-msgstr "hvis sat til ja, så tjek rettigheder på filer i brugernes hjemmekataloger."
+msgstr ""
+"hvis sat til ja, så tjek rettigheder på filer i brugernes hjemmekataloger."
#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "hvis sat til ja, så tjek om netværksgrænsesnittene er fuldstændigt åbne."
+msgstr ""
+"hvis sat til ja, så tjek om netværksgrænsesnittene er fuldstændigt åbne."
#: security/help.pm:119
#, c-format
@@ -14940,7 +14977,8 @@ msgstr "hvis sat til ja, så kør chkrootkit-kontroller."
#: security/help.pm:127
#, c-format
-msgid "if set, send the mail report to this email address else send it to root."
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
"hvis sat, så send postrapporter til denne postadresse, ellers send dem til "
"root."
@@ -14973,7 +15011,8 @@ msgstr "hvis sat til ja, så rapportér kontrolresultat på tty-en."
#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr "Sæt historiklængden for kommandoskallen. En værdi på -1 betyder ubegrænset."
+msgstr ""
+"Sæt historiklængden for kommandoskallen. En værdi på -1 betyder ubegrænset."
#: security/help.pm:136
#, c-format
@@ -15125,7 +15164,8 @@ msgstr "Ingen ældning af adgangskode for"
#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
-msgstr "Sæt udløbstid for adgangskoder og forsinkelsestider for deaktivering af konti"
+msgstr ""
+"Sæt udløbstid for adgangskoder og forsinkelsestider for deaktivering af konti"
#: security/l10n.pm:39
#, c-format
@@ -15359,8 +15399,10 @@ msgstr "Brug libsafe for servere"
#: security/level.pm:63
#, c-format
-msgid "A library which defends against buffer overflow and format string attacks."
-msgstr "Et bibliotek som beskytter mod angreb via bufferoverløb og formatstrenge."
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Et bibliotek som beskytter mod angreb via bufferoverløb og formatstrenge."
#: security/level.pm:64
#, c-format
@@ -15443,7 +15485,8 @@ msgstr ""
#: services.pm:35
#, c-format
-msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
#: services.pm:36
@@ -15931,8 +15974,10 @@ msgstr ""
#: share/advertising/05.pl:18
#, c-format
-msgid "\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr "\t* <b>Producentejede drivere</b> (såsom drivere for NVIDIA®, ATI™, etc.)."
+msgid ""
+"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
+msgstr ""
+"\t* <b>Producentejede drivere</b> (såsom drivere for NVIDIA®, ATI™, etc.)."
#: share/advertising/05.pl:19
#, c-format
@@ -16056,11 +16101,11 @@ msgstr "\t* <b>PowerPack+</b>, Linux-løsningen for skriveborde og servere."
#: share/advertising/09.pl:21
#, c-format
msgid ""
-"\t* <b>Mandrakeliux for x86-64</b>, The Mandrakelinux solution for "
-"making the most of your 64-bit processor."
+"\t* <b>Mandrakeliux for x86-64</b>, The Mandrakelinux solution for making "
+"the most of your 64-bit processor."
msgstr ""
-"\t* <b>Mandrakeliux for x86-64</b>, Mandrakelinux-løsningen for få "
-"mest ud af din 64-bit processor."
+"\t* <b>Mandrakeliux for x86-64</b>, Mandrakelinux-løsningen for få mest ud "
+"af din 64-bit processor."
#: share/advertising/10.pl:13
#, c-format
@@ -16235,8 +16280,10 @@ msgstr "<b>Kontact</b>"
#: share/advertising/15.pl:15
#, c-format
-msgid "Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr "Discovery indeholder <b>Kontact</b>, den nye KDE <b>gruppevare-løsning</b>."
+msgid ""
+"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
+msgstr ""
+"Discovery indeholder <b>Kontact</b>, den nye KDE <b>gruppevare-løsning</b>."
#: share/advertising/15.pl:17
#, c-format
@@ -16373,7 +16420,8 @@ msgstr "<b>Udviklingsmiljøer</b>"
#: share/advertising/19.pl:15 share/advertising/22.pl:15
#, c-format
-msgid "PowerPack gives you the best tools to <b>develop</b> your own applications."
+msgid ""
+"PowerPack gives you the best tools to <b>develop</b> your own applications."
msgstr ""
"PowerPack giver dig de bedste værktøjer til at <b>udvikle</b> dine egne "
"programmer."
@@ -16411,7 +16459,8 @@ msgstr ""
#: share/advertising/20.pl:16
#, c-format
msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: et realtids tekstprogram som lader sig tilpasses meget"
+msgstr ""
+"\t* <b>Emacs</b>: et realtids tekstprogram som lader sig tilpasses meget"
#: share/advertising/20.pl:17
#, c-format
@@ -16424,7 +16473,8 @@ msgstr ""
#: share/advertising/20.pl:18
#, c-format
-msgid "\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
+msgid ""
+"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
msgstr ""
"\t <b>Vim</b>: en avanceret tekstredigering med flere faciliteter end "
"standard Vi"
@@ -16537,12 +16587,15 @@ msgstr "<b>Servere</b>"
#: share/advertising/24.pl:15
#, c-format
-msgid "Empower your business network with <b>premier server solutions</b> including:"
-msgstr "Styrk dit firmanetværk med <b>udmærkede serverløsninger</b> som inkluderer:"
+msgid ""
+"Empower your business network with <b>premier server solutions</b> including:"
+msgstr ""
+"Styrk dit firmanetværk med <b>udmærkede serverløsninger</b> som inkluderer:"
#: share/advertising/24.pl:16
#, c-format
-msgid "\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
+msgid ""
+"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
msgstr "\t* <b>Samba</b>: Fil- og printer-tjenester for MS Windows-klienter"
#: share/advertising/24.pl:17
@@ -16570,7 +16623,8 @@ msgstr ""
#: share/advertising/24.pl:20
#, c-format
-msgid "\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
+msgid ""
+"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
msgstr ""
"\t* <b>ProFTPD</b>: det meget konfigurerbare, GPL-lisencierede FTP-"
"serverprogram"
@@ -16580,7 +16634,8 @@ msgstr ""
msgid ""
"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
"servers."
-msgstr "\t* <b>Postfix</b> og <b>Sendmail</b>: De populære og stærke postservere."
+msgstr ""
+"\t* <b>Postfix</b> og <b>Sendmail</b>: De populære og stærke postservere."
#: share/advertising/25.pl:13
#, c-format
@@ -16679,8 +16734,10 @@ msgstr ""
#: share/advertising/28.pl:17
#, c-format
-msgid "Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:"
-msgstr "Drag nytte af <b>værdifulde fordele</b> ved at være med i Mandrakeclub, med:"
+msgid ""
+"Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:"
+msgstr ""
+"Drag nytte af <b>værdifulde fordele</b> ved at være med i Mandrakeclub, med:"
#: share/advertising/28.pl:18
#, c-format
@@ -16758,7 +16815,8 @@ msgstr "\t* Fleksible <b>planlagte</b> opdateringer."
#: share/advertising/29.pl:21
#, c-format
-msgid "\t* Management of <b>all your Mandrakelinux systems</b> with one account."
+msgid ""
+"\t* Management of <b>all your Mandrakelinux systems</b> with one account."
msgstr "\t* Styring af <b>alle dine Mandrakelinux-systemer</b> via én konto."
#: share/advertising/30.pl:13
@@ -18071,7 +18129,8 @@ msgstr ""
#: standalone/drakTermServ:1156
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr "Tynde klienter vil ikke virke med autologin. Skal autologin deaktiveres?"
+msgstr ""
+"Tynde klienter vil ikke virke med autologin. Skal autologin deaktiveres?"
#: standalone/drakTermServ:1172
#, c-format
@@ -18237,7 +18296,8 @@ msgstr "%s ikke fundet...\n"
#: standalone/drakTermServ:1821
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke ændret"
+msgstr ""
+"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke ændret"
#: standalone/drakTermServ:1961
#, c-format
@@ -18497,7 +18557,8 @@ msgstr "Interval cron er ikke tilgængelig endnu som ikke-root"
#: standalone/drakbackup:462 standalone/logdrake:437
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "\"%s\" er hverken en gyldig epostadresse eller en eksisterende lokal bruger!"
+msgstr ""
+"\"%s\" er hverken en gyldig epostadresse eller en eksisterende lokal bruger!"
#: standalone/drakbackup:466 standalone/logdrake:442
#, c-format
@@ -18728,7 +18789,8 @@ msgstr ""
#: standalone/drakbackup:1127
#, c-format
-msgid "Error during sending file via FTP. Please correct your FTP configuration."
+msgid ""
+"Error during sending file via FTP. Please correct your FTP configuration."
msgstr "Fejl ved sending af fil via FTP. Ret venligst din FTP-konfiguration."
#: standalone/drakbackup:1129
@@ -18784,7 +18846,8 @@ msgstr ""
#: standalone/drakbackup:1421
#, c-format
-msgid "These options can backup and restore all files in your /etc directory.\n"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
"katalog.\n"
@@ -18798,7 +18861,8 @@ msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
#: standalone/drakbackup:1553
#, c-format
msgid "Use Incremental/Differential Backups (do not replace old backups)"
-msgstr "Brug inkremental/forskels-backup (overskriv ikke gamle sikkerhedskopier)"
+msgstr ""
+"Brug inkremental/forskels-backup (overskriv ikke gamle sikkerhedskopier)"
#: standalone/drakbackup:1425 standalone/drakbackup:1489
#: standalone/drakbackup:1555
@@ -19194,7 +19258,8 @@ msgstr "Forsikr dig gerne om at cron-dæmonen er med i dine tjenester."
#: standalone/drakbackup:2157
#, c-format
-msgid "If your machine is not on all the time, you might want to install anacron."
+msgid ""
+"If your machine is not on all the time, you might want to install anacron."
msgstr ""
"Hvis din maskine ikke er tændt hele tiden, vil du måske gerne installere "
"anacron."
@@ -19848,7 +19913,8 @@ msgstr " og CD'en er i drevet"
#: standalone/drakbackup:3811
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "Sikkerhedskopier på ikke-monterbart medie - Brug Katalog til at genskabe"
+msgstr ""
+"Sikkerhedskopier på ikke-monterbart medie - Brug Katalog til at genskabe"
#: standalone/drakbackup:3827
#, c-format
@@ -20485,7 +20551,8 @@ msgstr ""
#: standalone/drakconnect:716
#, c-format
-msgid "Congratulations, the \"%s\" network interface has been successfully deleted"
+msgid ""
+"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr "Tillykke, netværksgrænsesnittet '%s' er blevet slettet uden problemer"
#: standalone/drakconnect:732
@@ -21514,8 +21581,10 @@ msgstr " --help - vis denne hjælpetekst \n"
#: standalone/drakhelp:23
#, c-format
-msgid " --id <id_label> - load the html help page which refers to id_label\n"
-msgstr " --id <id_label> - indlæs html-hjælpesiden som refererer til id_label\n"
+msgid ""
+" --id <id_label> - load the html help page which refers to id_label\n"
+msgstr ""
+" --id <id_label> - indlæs html-hjælpesiden som refererer til id_label\n"
#: standalone/drakhelp:24
#, c-format
@@ -21863,7 +21932,8 @@ msgstr "Intet aftryk fundet!"
#: standalone/drakpxe:197
#, c-format
-msgid "No CD or DVD image found, please copy the installation program and rpm files."
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Intet CD- eller DVD-aftryk fundet, kopiér venligst installationsprogrammet "
"og rpm-filerne."
@@ -24222,7 +24292,8 @@ msgstr "listen af alternative drivprogrammer for dette lydkort"
#: standalone/harddrake2:27
#, c-format
-msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
#: standalone/harddrake2:29 standalone/harddrake2:144
@@ -24259,7 +24330,8 @@ msgstr "Kapacitet for drevet"
#: standalone/harddrake2:36
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "specielle kapaciteter for driveren (brændemulighed eller DVD-understøttelse)"
+msgstr ""
+"specielle kapaciteter for driveren (brændemulighed eller DVD-understøttelse)"
#: standalone/harddrake2:37
#, c-format
@@ -24559,7 +24631,8 @@ msgstr "Om FPU-en har en irq-vektor"
#: standalone/harddrake2:76
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
+msgstr ""
+"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
#: standalone/harddrake2:77
#, c-format
@@ -24569,7 +24642,8 @@ msgstr "F00f-fejl"
#: standalone/harddrake2:77
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "tidlige pentiummer var fejlbehæftede og frøs ved afkodning af bytekoden F00F"
+msgstr ""
+"tidlige pentiummer var fejlbehæftede og frøs ved afkodning af bytekoden F00F"
#: standalone/harddrake2:78
#, c-format
@@ -24750,7 +24824,8 @@ msgstr "Enhedsfil"
#: standalone/harddrake2:113
#, c-format
-msgid "the device file used to communicate with the kernel driver for the mouse"
+msgid ""
+"the device file used to communicate with the kernel driver for the mouse"
msgstr "enhedsfilen brugt for at kommunikere med kernedrivere for musen"
#: standalone/harddrake2:114
@@ -24963,7 +25038,8 @@ msgstr "Diverse"
#: standalone/harddrake2:339
#, c-format
-msgid "Click on a device in the left tree in order to display its information here."
+msgid ""
+"Click on a device in the left tree in order to display its information here."
msgstr "Klik på en enhed i det venstre træ for at vise dets oplysninger hér."
#: standalone/harddrake2:391
@@ -25250,7 +25326,8 @@ msgstr "Opsætning af tjenester"
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
-msgstr "Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kører"
+msgstr ""
+"Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kører"
#: standalone/logdrake:421
#, c-format
@@ -25282,7 +25359,8 @@ msgstr "Indtast din adgangskode for epost nedenfor"
#: standalone/logdrake:430
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr "og indtast navnet (eller IP-adressen) på smtp-serveren, du ønsker at bruge"
+msgstr ""
+"og indtast navnet (eller IP-adressen) på smtp-serveren, du ønsker at bruge"
#: standalone/logdrake:449
#, c-format
@@ -25761,7 +25839,8 @@ msgstr "Afbryder Skannerdrake."
#: standalone/scannerdrake:60
#, c-format
-msgid "Could not install the packages needed to set up a scanner with Scannerdrake."
+msgid ""
+"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
"Kunne ikke installere de nødvendige pakker til at opsætte en skanner med "
"Scannerdrake."
@@ -26074,7 +26153,8 @@ msgstr ""
#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
-msgstr "Der blev ikke fundet nogen skannere som er tilgængelige på dit system.\n"
+msgstr ""
+"Der blev ikke fundet nogen skannere som er tilgængelige på dit system.\n"
#: standalone/scannerdrake:452
#, c-format
@@ -29783,4 +29863,3 @@ msgstr "Installation mislykkedes"
#~ msgid "remove"
#~ msgstr "fjern"
-
='n1419' href='#n1419'>1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515
# Korean translation of drakbootdisk.
# Copyright (C) 2001 Free Software Foundation, Inc.
# Jaegeum Choe <baedaron@hananet.net>, 2001.
#
# changes asked by HP people -- pablo 2003-01-23
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-09-12 12:22+0200\n"
"PO-Revision-Date: 2002-09-09 09:08+0900\n"
"Last-Translator: Jaegeum Cze <baedaron@hanafos.com>\n"
"Language-Team: Korean <beadaron@hanafos.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: ../help.pm:14
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mageia distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"더 진행하기 전에 사용자 계약서를 자세하게 읽어 보세요.\n"
"사용자 계약서는 전체 맨드리바 리눅스 배포본을 포괄하는 내용이며,\n"
"만약 동의하지 않으신다면 「거부」버튼을 누르세요. 거부 버튼은 현재 설치를\n"
"즉각 종료하게 합니다. 설치를 계속하고 싶다면 「동의」버튼을 누르세요."

#: ../help.pm:20
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: ../help.pm:54
#, c-format
msgid "User name"
msgstr ""

#: ../help.pm:54
#, c-format
msgid "Accept user"
msgstr ""

#: ../help.pm:54
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "aboot를 사용하시겠습니까?"

#: ../help.pm:57
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard disk drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
"\"sd\" if it is a SCSI hard disk drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard disk drives:\n"
"\n"
" * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard disk drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard disk drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard disk drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard disk drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"선택된 하드디스크상의 기존 리눅스 파티션이 위에 열거되어 있습니다.\n"
"마법사에 의해 이미 설정된 사항을 보존할 수도 있으며, 이는 대부분의 일반\n"
"설치에 적절한 설정입니다. 만약 직접 변경하시겠다면, 최소한 루트 파티션"
"(「/」)\n"
"은 반드시 지정해야 합니다. 너무 작은 파티션을 선택하지는 마세요. 충분한 소프"
"트웨어\n"
"를 설치하지 못하는 수가 있습니다. 만약 개인 데이터가 별도의 파티션에 저장되도"
"록\n"
"하고 싶다면, 「/home」파티션을 별도로 만드세요.(오직 리눅스 파티션이 둘 이상"
"일\n"
"경우에만 가능합니다.)\n"
"\n"
"각 파티션은 다음과 같이 열거됩니다: 「이름」,「용량」.\n"
"\n"
"「이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n"
"「파티션 번호」(가령, 「hda1」).\n"
"\n"
"「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n"
"SCSI 디스크일 경우에는 「sd」입니다.\n"
"\n"
"「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n"
"IDE 하드디스크의 경우:\n"
"\n"
"  ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"  ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI "
"ID」\n"
"와 같은 식으로 의미를 가집니다."

#: ../help.pm:88
#, fuzzy, c-format
msgid ""
"The Mageia installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"맨드리바 리눅스 설치 시스템은 여러 장의 CD로 구성되어 있습니다.\n"
"드레이크X는 선택된 각각의 팩키지가 어느 CD에 들어 있는지 이미 알고 있습니"
"다.\n"
"필요시 현재 CD를 자동으로 꺼내고 다른 CD의 삽입을 요청할 것입니다."

#: ../help.pm:95
#, fuzzy, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mageia, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mageia sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"이제 시스템상에 설치할 프로그램들을 지정할 차례입니다.\n"
"맨드리바 리눅스에는 설치할 수 있는 수천 개의 프로그램들이 있기 때문에\n"
"사용자가 그것들을 모두 다 알지는 못할 것입니다.\n"
"\n"
"만약 표준 CD 설치를 수행하고 있는 중이라면, 현재 가지고 있는 CD들에 대해\n"
"질문할 것입니다. 가지고 있는 CD들의 라벨을 확인하고 현재 님의 상황에 맞는\n"
"선택 상자를 지정하세요. 계속할 준비가 되었으면, 「확인」을 누르세요.\n"
"\n"
"팩키지들은 용도에 따라 그룹으로 나열되어 있습니다.\n"
"그룹들 자체는 또다시 네 개의 영역으로 나열되어 있습니다:\n"
"\n"
"  ○ 「워크스테이션」: 시스템을 워크스테이션으로 사용할 계획이라면,\n"
"하나 이상의 해당 그룹을 선택하세요.\n"
"\n"
"  ○ 「개발」: 시스템을 프로그래밍의 용도로 사용하려 한다면, 원하는 그룹들을\n"
"선택하세요.\n"
"\n"
"  ○ 「서버」: 끝으로, 시스템이 서버되기를 원한다면, 여기서 대부분의 일반 서비"
"스들이\n"
"설치되도록 선택할 수 있습니다.\n"
"\n"
"  ○ 「그래픽 환경」: 여기는 님이 선호하는 그래픽 환경을 선택하는 곳입니다.\n"
"그래픽 환경 워크스테이션을 원한다면, 최소한 하나는 선택해야 합니다!\n"
"\n"
"마우스 포인터를 그룹 이름들 위로 올리면, 해당 그룹에 대한 작은 풍선 도움말"
"을\n"
"보여 줄 것입니다.\n"
"\n"
"「개별 팩키지 선택」옵션을 선택할 수도 있습니다.\n"
"이 옵션은 님이 제공되어지는 팩키지들에 대해 잘 알고 있거나, 설치되는 팩키지들"
"에 대한\n"
"총체적인 제어를 원할 경우에 유용할 것입니다.\n"
"\n"
"만약 님이 「업데이트」모드로 설치를 시작했다면, 기존에 설치되지 않은 팩키지들"
"이\n"
"설치되는 것을 막기위해 모든 그룹을 선택해제할 수 있습니다. 이렇게 하는 것은\n"
"기존 시스템을 업데이트하거나 고치기 위한 좋은 방법입니다."

#: ../help.pm:149 ../help.pm:591
#, c-format
msgid "Upgrade"
msgstr "업그레이드"

#: ../help.pm:149
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "문서"

#: ../help.pm:149
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "최소 설치"

#: ../help.pm:152
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mageia will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mageia was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: ../help.pm:183
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: ../help.pm:185
#, fuzzy, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"이제 부팅시에 어떤 서비스를 자동으로 시작하게 할지를 선택해야 합니다.\n"
"\n"
"현재 설치된 모든 서비스들이 여기에서 보여지고 있습니다.\n"
"신중하게 검토해서 부팅시에 항상 필요로하는 것이 아니라면 선택을 해제하세요.\n"
"\n"
"마우스를 서비스 이름들 위로 올리면, 각 서비스에 대한 간단한 설명을 보여 줄 것"
"입니다.\n"
"만약 어떤 서비스가 필요한 것인지 아닌지를 잘 모르겠다면,\n"
"기본값으로 그냥 두는 것이 안전한 선택입니다.\n"
"\n"
"이 컴퓨터를 서버용으로 사용하려 한다면, 이 단계에서 매우 주의해야 합니다.\n"
"필요하지 않은 서비스가 시작되는 것은 바람직하지 않습니다. 일부 서비스는 \n"
"서버상에서 실핸된다면 위험할 수도 있다는 것을 명심하세요. 원칙적으로 \n"
"꼭 필요한 서비스들만 선택하세요."

#: ../help.pm:209
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: ../help.pm:213
#, c-format
msgid "Hardware clock set to GMT"
msgstr ""

#: ../help.pm:213
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "자동 시간 동기화 (NTP 사용)"

#: ../help.pm:223
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: ../help.pm:234
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mageia rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: ../help.pm:291
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: ../help.pm:298
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: ../help.pm:306
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: ../help.pm:311
#, fuzzy, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"마지막으로, 부팅시에 자동으로 그래픽 환경을 사용할 것인지를 질문할 것입니"
"다.\n"
"주의: 이 질문은 설정을 테스트하지 않았을지라도 나타나게 될 것입니다.\n"
"시스템을 확실히 서버용으로 사용할 것이거나, 화면 설정에 성공하지 못한 경우라"
"면\n"
"「아니오」를 누르세요."

#: ../help.pm:319
#, fuzzy, c-format
msgid ""
"You now need to decide where you want to install the Mageia\n"
"operating system on your hard disk drive. If your hard disk drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard disk drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mageia system.\n"
"\n"
"Because the process of partitioning a hard disk drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard disk drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard disk drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard disk drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mageia and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard disk drive and replace them with your new Mageia system, choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard disk drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"이제 하드디스크의 어디에 리눅스 맨드리바를 설치할지를\n"
"선택해야 합니다. 만약 하드디스크가 완전히 비어 있거나 또는\n"
"다른 운영체제가 하드디스크 전체를 점유하고 있다면, 파티션을\n"
" 나누어야 합니다. 파티션을 나눈다함은 리눅스 맨드리바가\n"
"설치될 공간을 확보하기 위하여 디스크를 논리적으로 분할한다는 의미입니다.\n"
"\n"
"일반적으로 파티션 과정을 거쳐 버리면 기존 데이터의 복구가 불가능해지기\n"
"때문에,초보자에게는 고민스럽고 걱정스러운 작업입니다. 하지만 마법사를\n"
"사용하면 이 작업을 쉽게 할 수 있습니다. 시작하기 전에, 충분한 시간을 가지고\n"
"사용자 설명서를 읽어 보세요.\n"
"\n"
"현재 전문가 모드로 설치를 진행 중이라면, 리눅스 맨드리바의 파티션 분할 도구"
"인\n"
"디스크드레이크를 만나게 될 것입니다. 이 도구는 파티션드르이 세밀한 조정을 가"
"능하게\n"
"합니다. 설명서의 디스크드레이크 장을 보세요; 사용법이 동일합니다. 위에서 언급"
"했듯이\n"
"화면에 있는 「마법사」버튼을 눌러서, 파티션 분할 작업을 위한 마법사를\n"
"실행할 수도 있습니다.\n"
"\n"
"만약 이전에 리눅스를 설치한 적이 있거나 다른 파티션 도구로 만들어 놓은 리눅스"
"용\n"
"파티션들이 이미 존재한다면, 리눅스 설치에 사용할 파티션들을\n"
"선택만 하면 됩니다.\n"
"\n"
"만약 아직 리눅스용 파티션이 없다면, 새로 만들어야 합니다. 그러기 위해서는\n"
"위에 있는 마법사를 사용하세요. 하드디스크의 설정에 따라 다음과 같은\n"
"몇 가지의 방법이 있습니다:\n"
"\n"
" ○ 빈 공간 사용: 빈 디스크의 자동 파티션 분할 작업을 하게 됩니다.\n"
"파티션 분할 작업에 대해 더 이상 신경쓸 필요가 없게 됩니다.\n"
"\n"
" ○ 기존 파티션 사용: 마법사가 기존의 리눅스 파티션을 발견한 경우입니다.\n"
"기존의 파티션에다가 리눅스를 설치할려면, 이것을 선택하세요.\n"
"\n"
" ○ 윈도우즈 파티션의 빈 공간 사용: 만약 MS 윈도우즈가 설치되어 있고 모든 디스"
"크 공간을 사용하고 있다면,\n"
"리눅스용 공간을 새로 만들어야 합니다. 이렇게 하기위해서는, 윈도우즈 파티션을 "
"지우거나(「전체 디스크 삭제」\n"
"와 「전문가 모드」부분을 참조하세요.), 윈도우즈 파티션의 크기를 재조정하여 공"
"간을 확보할 수 있습니다. 윈도우즈\n"
"파티션의 재조정은 기존의 데이터를 파괴하지 않기 때문에, 윈도우즈와 리눅스 맨"
"드레이크를 한 컴퓨터에서 함께\n"
"사용하고자 한다면  이것이 권장되는 방법입니다.\n"
"\n"
"이 방법을 선택한다면, 윈도우즈 파티션의 크기가 현재보다 줄어들기 때문에 윈도"
"우즈를\n"
"사용할 때에는 소프트웨어를 설치하거나 데이터를 저장할 빈 공간이 그만큼 적어진"
"다는\n"
"것을 유념하세요.\n"
"\n"
" ○ 전체 디스크 삭제: 만약 디스크상의 모든 기존 파티션과 데이터를 삭제하고\n"
"리눅스 맨드리바를 위한 파티션으로 바꾸고 싶다면, 이것을 선택하세요.\n"
"주의하세요: 일단 이렇게 하고나면 다시 되돌릴 수 없습니다.\n"
"\n"
"   !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n"
"\n"
" ○ 윈도우즈 제거: 디스크상의 모든 파티션을 삭제하고, 초기화된 디스크 상태에"
"서\n"
"파티션 작업을 다시 합니다. 디스크상의 모든 데이터는 손실됩니다.\n"
"\n"
"   !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n"
"\n"
" ○ 전문가 모드: 만약 수동으로 파티션 작업을 하고자 한다면, 이것을 선택하세"
"요.\n"
"이 방법은 대단히 강력하지만 또한 위험할 수 있다는 것을 명심하세요. 쉽게 데이"
"터를\n"
"잃어 버릴 수 있습니다. 전문적인 지식이 없다면, 이 방법은 절대 선택하지 마세"
"요."

#: ../help.pm:377
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "기존의 파티션 사용"

#: ../help.pm:370
#, c-format
msgid "Use the free space on the Microsoft Windows® partition"
msgstr ""

#: ../help.pm:370
#, c-format
msgid "Erase entire disk"
msgstr "전체 디스크 삭제"

#: ../help.pm:380
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"설치를 완료하였습니다. 님의 GNU/리눅스 시스템은 이제 사용할 준비가\n"
"되었습니다. 시스템을 다시 부팅하려면 「확인」을 누르세요.\n"
"컴퓨터가 다시 부팅되면, (다중 부팅이 설정되었을 경우에) 님이 선호하는\n"
"운영체제를 시작할 수 있습니다.\n"
"\n"
"「고급」버튼(점문가 모드에만 있음)을 누르면 두 개의 추가 버튼이 나타넙니다:\n"
"\n"
"  ○ 「자동 설치 플로피 생성」: 님이 지금까지 설치한 내용을 관리자의 별다른\n"
"도움없이 자동으로 전체 설치를 수행하게 하는\n"
"자동 설치 플로피 디스크를 만듭니다.\n"
"\n"
"    주의: 버튼을 누르면 두 개의 개별적인 옵션이 나타납니다:\n"
"\n"
"    ○ 「재생」: 파티션 나누기 작업만 제외하고, 나머지 과정은 자동설치로\n"
"수행하는 자동설치 플로피를 만듭니다.\n"
"\n"
"    ○ 「자동화」: 디스크상의 모든 데이터를 삭제하고 모든 파티션이 다시\n"
"만들어지는 완벽한 자동 설치를 수행하는 플로피를 만듭니다.\n"
"\n"
"    이 기능을 사용하면, 많은 수의 비슷한 컴퓨터에 설치작업을 할 때 편리합니"
"다.\n"
"    자세한 정보는 저희 윕사이트의 자동설치관련 부분을 참조하세요.\n"
"\n"
"  ○ 「팩키지 선택사항 저장」(*): 앞 단계에서 선택한 팩키지 목록을 저장합니"
"다.\n"
"또 다른 설치를 수행할 때, 플로피를 드라이브에 넣고, [F1]키를 눌러서\n"
"설치 화면이 도움말 화면으로 들어가게 한후, 「linux defcfg=\"floppy\"」라고\n"
"입력하세요.\n"
"\n"
"(*) 님은 FAT으로 포맷된 플로피 하나를 가지고 있어야 합니다.\n"
"      (리눅스에서 포맷하려면, 「mformat a:」명령을 사용하세요.)"

#: ../help.pm:412
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "자동 설치 플로피 디스크 생성"

#: ../help.pm:405
#, c-format
msgid "Replay"
msgstr ""

#: ../help.pm:405
#, c-format
msgid "Automated"
msgstr ""

#: ../help.pm:405
#, c-format
msgid "Save packages selection"
msgstr ""

#: ../help.pm:408
#, fuzzy, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mageia operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"새로 만들어진 파티션들은 포맷되어져야 합니다.\n"
"(포맷이라 함은 파일 시스템을 만든다는 의미입니다.)\n"
"\n"
"지금 기존의 데이터를 삭제하기 위해서 기존 파티션들을\n"
"다시 포맷할 수도 있습니다. 그렇게 하고 싶다면, 해당 파티션들도\n"
"선택하세요.\n"
"\n"
"주의: 모든 기존 파티션들을 다시 포맷할 필요는 없습니다.\n"
"(「/」,「/usr」,「/var」와 같은) 운영체제를 담고 있는 파티션들은\n"
"다시 포맷하더라도, (「/home」과 같은) 데이터를 단고 있는 파티션들은\n"
", 기존 데이터를 보존하고 싶을 경우, 다시 포맷할 필요가 없습니다.\n"
"\n"
"파티션들을 선택할 때 주의하세요. 일단 포팩이 되고나면,\n"
"선택됐던 파티션상에 존재했던 모든 데이터는 삭제되며,\n"
"복구가 불가능해 집니다.\n"
"\n"
"포맷할 준비가 되었으면, 「확인」을 누르세요.\n"
"\n"
"맨드리바 리눅스 설치용 파티션을 다시 선택하고 싶다면,\n"
"「취소」를 누르세요.\n"
"\n"
"디스크상의 손상된 블럭을 체크하며 포맷하고 싶다면,\n"
"「고급」을 누르세요."

#: ../help.pm:437
#, c-format
msgid ""
"By the time you install Mageia, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: ../help.pm:450
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mageia\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"이제 컴퓨터의 보안 수준을 선택할 단계입니다.\n"
"자유로운 사용을 위해서는 컴퓨터가 보다 더 많이 개방되어져야 하며,\n"
"저장된 데이터의 중요성이 크면 클수록, 더 높은 보안 수준이 유지되어야 합니"
"다.\n"
"그러나 일반적으로 보다 높은 보안 수준은 보다 많은 사용상의 불편함을 감수해야"
"만\n"
"이루어질 수 있음을 유념하세요. 각 보안 수준이 의미하는 바에 대한 자세한 정보"
"를\n"
"알고 싶다면 「사용자 지침서」의 MSEC 장을 참조하세요.\n"
"\n"
"어느 것을 선택해야 할지 잘 모르겠다면, 기본값을 유지하세요."

#: ../help.pm:461
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "보안 관리자 (로그인 또는 이메일)"

#: ../help.pm:464
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mageia system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard disk drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard disk drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard disk drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard disk drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard disk drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard disk drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard disk drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard disk drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard disk drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"이제 어느 파티션이 맨드리바 리눅스의 설치용으로 사용되어야 할지를\n"
"선택해야 합니다. 이전에 다른 GNU/리눅스를 설치한 적이 있거나, 다른 파티션\n"
"도구를 사용하여 이미 파티션들이 정의되어 있다면, 기존 파티션을 그대로 사용\n"
"할 수 있습니다. 그렇지 않다면 하드디스크의 파티션들을 지금 만들어야 합니다.\n"
"\n"
"파티션을 만들려면, 먼저 하드디스크를 선택하세요. 파티션을 만들여는 하드디스크"
"가\n"
"첫 번째 IDE 디스크라면 「hda」, 두 번째 IDE 디스크라면 「hdb」와 같은 식이"
"며,\n"
"첫 번째 SCSI 디스크라면 「sda」와 같은 식입니다.\n"
"\n"
"파티션을 나눌 때, 다음 옵션을 사용할 수 있습니다:\n"
"\n"
"  ○ 「모두 삭제」: 선택된 디스크의 모든 기존 파티션을 삭제합니다.\n"
"\n"
"  ○ 「자동 할당」: 선택된 디스크의 빈 공간에 자동으로 EXT2와 스왑 파티션을\n"
"할당합니다.\n"
"\n"
"  ○ 「파티션 테이블 복구」: 파티션 테이블이 손상되어 있을 경우, 이 옵션으로\n"
"손산된 테이블을 복구합니다. !!주의!! 복구시도가 실패할 수도 있다는 것을\n"
"명심하세요.\n"
"\n"
"  ○ 「되돌리기」: 변경 사항을 취소합니다.\n"
"\n"
"  ○ 「다시 읽기」: 모든 변경 사항을 취소하고, 초기 파티션 테이블을 다시 읽습"
"니다.\n"
"\n"
"  ○ 「마법사」: 마법사를 실행하여 파티션을 나눕니다. 파티션 나누기에 대한 지"
"식이\n"
"부족하다면, 이 옵션을 사용하세요.\n"
"\n"
"  ○ 「플로피로부터 복구」: 이전에 플로피에 저장해둔 파티션 정보을 사용하여\n"
"파티션 테이블을 복구합니다.\n"
"\n"
"  ○ 「플로피에 저장」: 파티션 정보를 플로피에 저장합니다. 다음에 파티션 테이"
"블을 복구할\n"
"일이 생길 때 사용됩니다. 이 과정을 수행할 것을 권장하는 바입니다.\n"
"\n"
"  ○ 「완료」: 파티션 나누기 작업을 끝마치면, 이 옵션으로 변경 사항을 저장합니"
"다.\n"
"\n"
"정보: 키보드로 옵션을 선택할 수도 있습니다. 파티션들간의 이동은 [Tab]키와\n"
"[Up/Down]키를 사용하세요.\n"
"\n"
"파티션을 선택하고 난 후에는 다음 키를 사용할 수 있습니다:\n"
"\n"
"  ○ 「Ctrl + c」: (빈 파티션이 선택된 경우,) 새 파티션 만들기.\n"
"\n"
"  ○ 「Ctrl + d」: 파티션 삭제하기.\n"
"\n"
"  ○ 「Ctrl + m」: 마운트 위치 지정하기.\n"
"\n"
"만약 PPC 컴퓨터에서 설치하고 있는 중이라면, YABOOT 부트로더가 사용할 최소 "
"1MB\n"
"의 HFS 「부트스트랩」파티션을 만들 필요가 있습니다. 만약 그 파티션을 보다 크"
"게\n"
"(가령, 50MB) 만들면, 응급 상황시에 사용할 여분의 커널과 램디스크 이미지를\n"
"저장할 수 있는 유용한 장소가 될 것입니다."

#: ../help.pm:526
#, c-format
msgid "Save partition table"
msgstr ""

#: ../help.pm:526
#, c-format
msgid "Restore partition table"
msgstr ""

#: ../help.pm:526
#, c-format
msgid "Rescue partition table"
msgstr ""

#: ../help.pm:526
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "탈착식 미디어 자동 마운트"

#: ../help.pm:526
#, c-format
msgid "Wizard"
msgstr ""

#: ../help.pm:526
#, c-format
msgid "Undo"
msgstr ""

#: ../help.pm:526
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "일반 모드로 전환"

#: ../help.pm:536
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard disk drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mageia operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
"\"sd\" if it is a SCSI hard disk drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard disk drives:\n"
"\n"
" * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard disk drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard disk drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard disk drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard disk drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard disk drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"둘 이상의 MS 윈도우즈 파티션이 디스크상에서 발견되었습니다.\n"
"맨드리바 리눅스 운영체제를 설치하기 위해 크기를 조정할\n"
"파티션을 선택하세요.\n"
"\n"
"각 파티션은 다음과 같이 열거됩니다: 「리눅스 이름」,「윈도우즈 이름」,\n"
"「용량」.\n"
"\n"
"「리눅스 이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n"
"「파티션 번호」(가령, 「hda1」).\n"
"\n"
"「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n"
"SCSI 디스크일 경우에는 「sd」입니다.\n"
"\n"
"「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n"
"IDE 하드디스크의 경우:\n"
"\n"
"  ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"  ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI "
"ID」\n"
"와 같은 식으로 의미를 가집니다.\n"
"「윈도우즈 이름」은 MS 윈도우즈하에서의 이름입니다.\n"
"(가령, 첫 번째 디스크 또는 파티션은 「C:」입니다.)"

#: ../help.pm:567
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: ../help.pm:572
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mageia system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard disk drives are partitioned, or to change\n"
"the filesystem, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mageia system. Your current partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mageia systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mageia version \"8.1\" is not recommended."
msgstr ""

#: ../help.pm:594
#, fuzzy, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"일반적으로, 드레이크X는 (선택한 언어에 기반하여) 올바른 키보드를\n"
"자동으로 선택합니다. 그러나 사용하는 언어에 정확히 일치하는 키보드를\n"
"가지고 있지 않은 경우도 있을 수 있습니다: 가령, 영어를 사용하는 스위스인은\n"
"여전히 스위스 키보드를 원할 수도 있습니다. 또한 영어를 사용하지만, 캐나다 퀘"
"벡주에\n"
"살고 있다면 또한 이러한 경우가 될 것입니다. 이와 같은 경우라면, 이 단계에서\n"
"적당한 키보드를 목록에서 선택해야 합니다.\n"
"\n"
"지원되는 모든 키보드 목록을 보려면, 「추가정보」를\n"
"누르세요."

#: ../help.pm:612
#, fuzzy, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mageia's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"설치시 그리고 시스템용으로 사용할 언어를 선택하세요.\n"
"\n"
"「고급」을 누르면, 다른 언어도 추가로 선택할 수 있습니다.\n"
"다른 언어도 선택하게 되면, 그 언어와 관련된 시스템 문서 및 프로그램 파일들"
"도\n"
"설치하게 됩니다. 가령, 님의 시스템을 일본인도 사용할 수 있도록 하고 싶다면,\n"
"목록에서 주 언어로 「한국어」를 선택하고, 「고급」에서 「일본어」에 해당하"
"는\n"
"회색 별표를 선택하세요.\n"
"\n"
"여러개의 추가 언어를 선택할 수도 있습니다. 언어 선택을 끝마쳤으면,\n"
"「확인」을 눌러서 계속 진행하세요."

#: ../help.pm:650
#, c-format
msgid "Espanol"
msgstr ""

#: ../help.pm:643
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: ../help.pm:646
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"기본적으로 드레이크X는 님이 2버튼 마우스를 사용한다고 가정할 것이며,\n"
"세 번째 버튼은 에뮬레이션할 것입니다. 마우스가 PS/2, 시리얼, 혹은 USB용인지"
"는\n"
"드레이크X가 자동으로 알아낼 수 있습니다.\n"
"\n"
"만약 다른 마우스 유형을 지정하고 싶다면, 제공되는 목록에서 적당한 것을\n"
"선택하세요.\n"
"\n"
"만약 다른 마우스를  선택하게 되면, 마우스 테스트 화면을 보게될 것입니다.\n"
"그러면, 마우스 버튼과 휠을 조작하여 설정이 정확하게 되었는지 확인하세요.\n"
"만약 제대로 작동하기 않으면,「취소」버튼 위에서 스페이스 키나 엔터 키를\n"
"누르고 다시 선택하시기 바랍니다."

#: ../help.pm:684
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "버튼 에뮬레이션"

#: ../help.pm:684
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: ../help.pm:687
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"정확한 포트를 선택하세요. 예를 들어, MS 윈도우즈에서 COM1은\n"
"리눅스에서는 ttyS0로 명명됩니다."

#: ../help.pm:684
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: ../help.pm:745
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mageia offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mageia\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: ../help.pm:768
#, c-format
msgid "pdq"
msgstr "pDQ"

#: ../help.pm:724
#, c-format
msgid "CUPS"
msgstr ""

#: ../help.pm:724
#, c-format
msgid "Expert"
msgstr "전문가"

#: ../help.pm:771
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard disk drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"드레이크X가 시스템상에 있는 모든 하드 디스크를 검색하고\n"
"또한 PCI SCSI 어댑터 탐지를 시도할 것입니다.\n"
"만약 드레이크X가 장치를 발견하게 되면 자동으로\n"
"올바른 드라이버를 설치할 것입니다.\n"
"\n"
"드레이크X의 장치 검색이 실패하더라도, 님께 SCSI 장치의 유무를 질문하게 됩니"
"다.\n"
"목록에서 장치를 직접 선택하려면 「예」를, SCSI 장치가 없다면 「아니오」를 선"
"택하세요.\n"
"잘 모르겠다면, 「하드웨어 정보 보기」를 선택한 후 「확인」을 눌러서\n"
"시스템상에 존재하는 하드웨어들을 살펴볼 수도 있습니다.\n"
"하드웨어에 대한 검토가 끝나면 다시 「확인」버튼을 눌러서 SCSI 인터페이스 질"
"문 화면\n"
"으로 돌아 올 수 있습니다.\n"
"\n"
"직접 어댑터를 지정해야 할 때에는, 드레이크X가 옵션을 지정할 것인지를 물어\n"
"볼 것입니다. 이 때는 드레이크X가 필요한 옵션을 탐지하도록 하는 것이 좋습니"
"다.\n"
"일반적으로 이 방법은 잘 작동합니다.\n"
"\n"
"\n"
"만약 그렇지 않다면, 직접 드라이버 옵션을 지정해야 합니다. 사용자 설명서(3"
"장, \n"
"「하드웨어에 대한 종합정보」색션)를 참조하여, 하드웨어 설명서, \n"
"(인터넷에 연결할 수 있다면) 제조업체 웹 사이트, \n"
"또는 (윈도우즈가 설치되어 있다면) MS 윈도우즈에서 어떻게 여기에 필요한 \n"
"정보를 알아 낼 수 있는지 찾아 보세요."

#: ../help.pm:789
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: ../help.pm:794
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mageia Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mageia Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: ../help.pm:809
#, fuzzy, c-format
msgid "TV card"
msgstr "내장 ISDN 카드"

#: ../help.pm:809
#, fuzzy, c-format
msgid "ISDN card"
msgstr "내장 ISDN 카드"

#: ../help.pm:858
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "시작시 바로 X 실행"

#: ../help.pm:861
#, fuzzy, c-format
msgid ""
"Choose the hard disk drive you want to erase in order to install your new\n"
"Mageia partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"맨드리바 리눅스 파티션을 만들기 위해서 삭제할 하드디스클르 선택하세요.\n"
"주의:\n"
"디스크상의 모든 데이터는 손실되며, 영원히 복구가 불가능해 집니다!"

#: ../help.pm:866
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard disk drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard disk drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard disk drive."
msgstr ""
"이 하드디스크상의 모든 데이터와 파티션을 삭제하려면, 「확인」을 누르세요.\n"
"!!주의하세요!!일단 「확인」을 누르게 되면, MS 윈도우즈 데이털르 포함하여 이 "
"디스트상의 모든\n"
"데이터와 파티션은 복구가 불가능해 집니다.\n"
"\n"
"이 작업을 취소하려면, 지금 「취소」를 누르세요. 어떠한 데이터와 파티션도\n"
"손상되지 않을 것입니다."

#: ../help.pm:872
#, c-format
msgid "Next ->"
msgstr "다음 ->"

#: ../help.pm:872
#, c-format
msgid "<- Previous"
msgstr "<- 이전"

#~ msgid "authentication"
#~ msgstr "사용자 인증"