diff options
Diffstat (limited to 'perl-install/share/po/bs.po')
| -rw-r--r-- | perl-install/share/po/bs.po | 9235 |
1 files changed, 0 insertions, 9235 deletions
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po deleted file mode 100644 index 6f4f6b2a7..000000000 --- a/perl-install/share/po/bs.po +++ /dev/null @@ -1,9235 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR Free Software Foundation, Inc. -# Vedran Ljubovic <vljubovic@smartnet.ba>, 2001 -# -msgid "" -msgstr "" -"Project-Id-Version: DrakX VERSION\n" -"POT-Creation-Date: 2001-09-21 19:50+0200\n" -"PO-Revision-Date: 2001-09-22 17:16GMT\n" -"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n" -"Language-Team: Bosnian <prijevodi@lugbih.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 0.9.5\n" - -#: ../../Xconfigurator.pm_.c:231 -msgid "Configure all heads independently" -msgstr "Konfiguriši sve glave odvojeno" - -#: ../../Xconfigurator.pm_.c:232 -msgid "Use Xinerama extension" -msgstr "Koristi Xinerama ekstenziju" - -#: ../../Xconfigurator.pm_.c:235 -#, c-format -msgid "Configure only card \"%s\" (%s)" -msgstr "Konfiguriši samo karticu \"%s\" (%s)" - -#: ../../Xconfigurator.pm_.c:238 -msgid "Multi-head configuration" -msgstr "Multi-head konfiguracija" - -#: ../../Xconfigurator.pm_.c:239 -msgid "" -"Your system support multiple head configuration.\n" -"What do you want to do?" -msgstr "" -"Vaš sistem podržava konfiguraciju više glava.\n" -"Šta želite učiniti?" - -#: ../../Xconfigurator.pm_.c:248 -msgid "Graphic card" -msgstr "Grafička karta" - -#: ../../Xconfigurator.pm_.c:248 -msgid "Select a graphic card" -msgstr "Izaberite grafičku kartu" - -#: ../../Xconfigurator.pm_.c:249 -msgid "Choose a X server" -msgstr "Izaberite X server" - -#: ../../Xconfigurator.pm_.c:249 -msgid "X server" -msgstr "X server" - -#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313 -#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435 -#, c-format -msgid "XFree %s" -msgstr "XFree %s" - -#: ../../Xconfigurator.pm_.c:310 -msgid "Which configuration of XFree do you want to have?" -msgstr "Koju konfiguraciju XFree želite imati?" - -#: ../../Xconfigurator.pm_.c:321 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"Vaša kartica može imati podršku za 3D hardversko ubrzanje ali samo sa\n" -"XFree %s. Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D." - -#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356 -#, c-format -msgid "Your card can have 3D hardware acceleration support with XFree %s." -msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s." - -#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358 -#: ../../Xconfigurator.pm_.c:1435 -#, c-format -msgid "XFree %s with 3D hardware acceleration" -msgstr "XFree %s sa 3D hardverskim ubrzanjem" - -#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." -msgstr "" -"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n" -"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR." - -#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349 -#, c-format -msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" -msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem" - -#: ../../Xconfigurator.pm_.c:344 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n" -"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.\n" -"Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D." - -#: ../../Xconfigurator.pm_.c:364 -msgid "Xpmac (installation display driver)" -msgstr "Xpmac (installation display driver)" - -#: ../../Xconfigurator.pm_.c:368 -msgid "XFree configuration" -msgstr "XFree konfiguracija" - -#: ../../Xconfigurator.pm_.c:434 -msgid "Select the memory size of your graphic card" -msgstr "Izaberite veličinu memorije vaše grafičke karte" - -#: ../../Xconfigurator.pm_.c:492 -msgid "Choose options for server" -msgstr "Izaberite opcije za server" - -#: ../../Xconfigurator.pm_.c:516 -msgid "Choose a monitor" -msgstr "Izaberite monitor" - -#: ../../Xconfigurator.pm_.c:516 -msgid "Monitor" -msgstr "Monitor" - -#: ../../Xconfigurator.pm_.c:519 -msgid "" -"The two critical parameters are the vertical refresh rate, which is the " -"rate\n" -"at which the whole screen is refreshed, and most importantly the horizontal\n" -"sync rate, which is the rate at which scanlines are displayed.\n" -"\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a sync " -"range\n" -"that is beyond the capabilities of your monitor: you may damage your " -"monitor.\n" -" If in doubt, choose a conservative setting." -msgstr "" -"Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina\n" -"kojom se cijeli ekran osvježava, i najvažnije brzina horizontalne\n" -"sinhronizacije, što je brzina kojm se prikazuju skan-linije.\n" -"\n" -"VEOMA JE VAŽNO da ne navedete tip monitora čiji je sinhronizacioni\n" -"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n" -" Ako niste sigurni, izaberite najmanju opciju." - -#: ../../Xconfigurator.pm_.c:526 -msgid "Horizontal refresh rate" -msgstr "Brzina horizontalnog osvježavanja" - -#: ../../Xconfigurator.pm_.c:527 -msgid "Vertical refresh rate" -msgstr "Brzina vertiaklnog osvježavanja" - -#: ../../Xconfigurator.pm_.c:564 -msgid "Monitor not configured" -msgstr "Monitor nije konfigurisan" - -#: ../../Xconfigurator.pm_.c:567 -msgid "Graphic card not configured yet" -msgstr "Grafička karta još uvijek nije konfigurisana" - -#: ../../Xconfigurator.pm_.c:570 -msgid "Resolutions not chosen yet" -msgstr "Rezolucije još nisu odabrane" - -#: ../../Xconfigurator.pm_.c:587 -msgid "Do you want to test the configuration?" -msgstr "Želite li testirati konfiguraciju?" - -#: ../../Xconfigurator.pm_.c:591 -msgid "Warning: testing this graphic card may freeze your computer" -msgstr "Upozorenje: testiranje ove grafičke karte može zalediti računar" - -#: ../../Xconfigurator.pm_.c:594 -msgid "Test of the configuration" -msgstr "Testiranje konfiguracije" - -#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644 -msgid "" -"\n" -"try to change some parameters" -msgstr "" -"\n" -"probajte izmjeniti neke parametre" - -#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644 -msgid "An error has occurred:" -msgstr "Došlo je do greške" - -#: ../../Xconfigurator.pm_.c:668 -#, c-format -msgid "Leaving in %d seconds" -msgstr "Napuštam za %d sekundi" - -#: ../../Xconfigurator.pm_.c:679 -msgid "Is this the correct setting?" -msgstr "Da li je ovo ispravna vrijednost?" - -#: ../../Xconfigurator.pm_.c:688 -msgid "An error has occurred, try to change some parameters" -msgstr "Došlo je do greške, probajte izmjeniti neke parametre" - -#: ../../Xconfigurator.pm_.c:759 -msgid "Resolution" -msgstr "Rezolucija" - -#: ../../Xconfigurator.pm_.c:810 -msgid "Choose the resolution and the color depth" -msgstr "Izaberite rezoluciju i dubinu boja" - -#: ../../Xconfigurator.pm_.c:812 -#, c-format -msgid "Graphic card: %s" -msgstr "Grafička karta: %s" - -#: ../../Xconfigurator.pm_.c:813 -#, c-format -msgid "XFree86 server: %s" -msgstr "XFree86 server: %s" - -#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885 -#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301 -msgid "Expert Mode" -msgstr "Expert mod" - -#: ../../Xconfigurator.pm_.c:830 -msgid "Show all" -msgstr "Prikaži sve" - -#: ../../Xconfigurator.pm_.c:875 -msgid "Resolutions" -msgstr "Rezolucije" - -#: ../../Xconfigurator.pm_.c:1437 -#, c-format -msgid "Keyboard layout: %s\n" -msgstr "Raspored tastature: %s\n" - -#: ../../Xconfigurator.pm_.c:1438 -#, c-format -msgid "Mouse type: %s\n" -msgstr "Tip miša: %s\n" - -#: ../../Xconfigurator.pm_.c:1439 -#, c-format -msgid "Mouse device: %s\n" -msgstr "Uređaj miša: %s\n" - -#: ../../Xconfigurator.pm_.c:1440 -#, c-format -msgid "Monitor: %s\n" -msgstr "Monitor: %s\n" - -#: ../../Xconfigurator.pm_.c:1441 -#, c-format -msgid "Monitor HorizSync: %s\n" -msgstr "Monitor HorizSync: %s\n" - -#: ../../Xconfigurator.pm_.c:1442 -#, c-format -msgid "Monitor VertRefresh: %s\n" -msgstr "Monitor VertRefresh: %s\n" - -#: ../../Xconfigurator.pm_.c:1443 -#, c-format -msgid "Graphic card: %s\n" -msgstr "Grafička karta: %s\n" - -#: ../../Xconfigurator.pm_.c:1444 -#, c-format -msgid "Graphic card identification: %s\n" -msgstr "Identifikacija grafičke karte: %s\n" - -#: ../../Xconfigurator.pm_.c:1445 -#, c-format -msgid "Graphic memory: %s kB\n" -msgstr "Grafička memorija: %s kB\n" - -#: ../../Xconfigurator.pm_.c:1447 -#, c-format -msgid "Color depth: %s\n" -msgstr "Dubina boja: %s\n" - -#: ../../Xconfigurator.pm_.c:1448 -#, c-format -msgid "Resolution: %s\n" -msgstr "Rezolucija: %s\n" - -#: ../../Xconfigurator.pm_.c:1450 -#, c-format -msgid "XFree86 server: %s\n" -msgstr "XFree86 server: %s\n" - -#: ../../Xconfigurator.pm_.c:1451 -#, c-format -msgid "XFree86 driver: %s\n" -msgstr "XFree86 drajver: %s\n" - -#: ../../Xconfigurator.pm_.c:1469 -msgid "Preparing X-Window configuration" -msgstr "Pripremam X-Window konfiguraciju" - -#: ../../Xconfigurator.pm_.c:1489 -msgid "What do you want to do?" -msgstr "Šta želite učiniti?" - -#: ../../Xconfigurator.pm_.c:1494 -msgid "Change Monitor" -msgstr "Izmjena Monitora" - -#: ../../Xconfigurator.pm_.c:1495 -msgid "Change Graphic card" -msgstr "Izmjena Grafičke kartice" - -#: ../../Xconfigurator.pm_.c:1497 -msgid "Change Server options" -msgstr "Izmjena Server opcija" - -#: ../../Xconfigurator.pm_.c:1498 -msgid "Change Resolution" -msgstr "Izmjena Rezolucije" - -#: ../../Xconfigurator.pm_.c:1499 -msgid "Show information" -msgstr "Prikaži informacije" - -#: ../../Xconfigurator.pm_.c:1500 -msgid "Test again" -msgstr "Testiraj ponovo" - -#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156 -msgid "Quit" -msgstr "Izlaz" - -#: ../../Xconfigurator.pm_.c:1509 -#, c-format -msgid "" -"Keep the changes?\n" -"Current configuration is:\n" -"\n" -"%s" -msgstr "" -"Zadržati izmjene?\n" -"Trenutna konfiguracija je:\n" -"\n" -"%s" - -#: ../../Xconfigurator.pm_.c:1532 -#, c-format -msgid "Please relog into %s to activate the changes" -msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena" - -#: ../../Xconfigurator.pm_.c:1552 -msgid "Please log out and then use Ctrl-Alt-BackSpace" -msgstr "Molimo izvršite logout i zatim koristitite Ctrl-Alt-BackSpace" - -#: ../../Xconfigurator.pm_.c:1555 -msgid "X at startup" -msgstr "X u startanju" - -#: ../../Xconfigurator.pm_.c:1556 -msgid "" -"I can set up your computer to automatically start X upon booting.\n" -"Would you like X to start when you reboot?" -msgstr "" -"Mogu podesiti vaš računar da automatski pokrene X nakon boota.\n" -"Želite li da se X pokrene kada bootate?" - -#: ../../Xconfigurator_consts.pm_.c:6 -msgid "256 colors (8 bits)" -msgstr "256 boja (8 bita)" - -#: ../../Xconfigurator_consts.pm_.c:7 -msgid "32 thousand colors (15 bits)" -msgstr "32 hiljada boja (15 bita)" - -#: ../../Xconfigurator_consts.pm_.c:8 -msgid "65 thousand colors (16 bits)" -msgstr "65 hiljada boja (16 bita)" - -#: ../../Xconfigurator_consts.pm_.c:9 -msgid "16 million colors (24 bits)" -msgstr "16 miliona boja (24 bita)" - -#: ../../Xconfigurator_consts.pm_.c:10 -msgid "4 billion colors (32 bits)" -msgstr "4 milijarde boja (32 bita)" - -#: ../../Xconfigurator_consts.pm_.c:106 -msgid "256 kB" -msgstr "256 kB" - -#: ../../Xconfigurator_consts.pm_.c:107 -msgid "512 kB" -msgstr "512 kB" - -#: ../../Xconfigurator_consts.pm_.c:108 -msgid "1 MB" -msgstr "1 MB" - -#: ../../Xconfigurator_consts.pm_.c:109 -msgid "2 MB" -msgstr "2 MB" - -#: ../../Xconfigurator_consts.pm_.c:110 -msgid "4 MB" -msgstr "4 MB" - -#: ../../Xconfigurator_consts.pm_.c:111 -msgid "8 MB" -msgstr "8 MB" - -#: ../../Xconfigurator_consts.pm_.c:112 -msgid "16 MB" -msgstr "16 MB" - -#: ../../Xconfigurator_consts.pm_.c:113 -msgid "32 MB" -msgstr "32 MB" - -#: ../../Xconfigurator_consts.pm_.c:114 -msgid "64 MB or more" -msgstr "64 MB ili više" - -#: ../../Xconfigurator_consts.pm_.c:122 -msgid "Standard VGA, 640x480 at 60 Hz" -msgstr "Standardna VGA, 640x480 na 60 Hz" - -#: ../../Xconfigurator_consts.pm_.c:123 -msgid "Super VGA, 800x600 at 56 Hz" -msgstr "Super VGA, 800x600 na 56 Hz" - -#: ../../Xconfigurator_consts.pm_.c:124 -msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" -msgstr "8514 Kompatibilna, 1024x768 na 87 Hz sa preplitanjem (bez 800x600)" - -#: ../../Xconfigurator_consts.pm_.c:125 -msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" -msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz" - -#: ../../Xconfigurator_consts.pm_.c:126 -msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" -msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz" - -#: ../../Xconfigurator_consts.pm_.c:127 -msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" -msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz" - -#: ../../Xconfigurator_consts.pm_.c:128 -msgid "High Frequency SVGA, 1024x768 at 70 Hz" -msgstr "High Frequency SVGA, 1024x768 na 70 Hz" - -#: ../../Xconfigurator_consts.pm_.c:129 -msgid "Multi-frequency that can do 1280x1024 at 60 Hz" -msgstr "Multi-frequency koja može postići 1280x1024 na 60 Hz" - -#: ../../Xconfigurator_consts.pm_.c:130 -msgid "Multi-frequency that can do 1280x1024 at 74 Hz" -msgstr "Multi-frequency koja može postići 1280x1024 na 74 Hz" - -#: ../../Xconfigurator_consts.pm_.c:131 -msgid "Multi-frequency that can do 1280x1024 at 76 Hz" -msgstr "Multi-frequency koja može postići 1280x1024 na 76 Hz" - -#: ../../Xconfigurator_consts.pm_.c:132 -msgid "Monitor that can do 1600x1200 at 70 Hz" -msgstr "Monitor koji može postići 1600x1200 na 70 Hz" - -#: ../../Xconfigurator_consts.pm_.c:133 -msgid "Monitor that can do 1600x1200 at 76 Hz" -msgstr "Monitor koji može postići 1600x1200 na 76 Hz" - -#: ../../any.pm_.c:96 ../../any.pm_.c:121 -msgid "First sector of boot partition" -msgstr "Prvi sektor boot particije" - -#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194 -msgid "First sector of drive (MBR)" -msgstr "Prvi sektor drajva (MBR)" - -#: ../../any.pm_.c:100 -msgid "SILO Installation" -msgstr "SILO instalacija" - -#: ../../any.pm_.c:101 ../../any.pm_.c:114 -msgid "Where do you want to install the bootloader?" -msgstr "Gdje želite smjestiti bootloader?" - -#: ../../any.pm_.c:113 -msgid "LILO/grub Installation" -msgstr "LILO/grub instalacija" - -#: ../../any.pm_.c:125 ../../any.pm_.c:139 -msgid "SILO" -msgstr "SILO" - -#: ../../any.pm_.c:127 -msgid "LILO with text menu" -msgstr "LILO sa tekstualnim menijem" - -#: ../../any.pm_.c:128 ../../any.pm_.c:139 -msgid "LILO with graphical menu" -msgstr "LILO sa grafičkim menijem" - -#: ../../any.pm_.c:131 -msgid "Grub" -msgstr "Grub" - -#: ../../any.pm_.c:135 -msgid "Boot from DOS/Windows (loadlin)" -msgstr "Bootanje iz DOS/Windowsa (loadlin)" - -#: ../../any.pm_.c:137 ../../any.pm_.c:139 -msgid "Yaboot" -msgstr "Yaboot" - -#: ../../any.pm_.c:145 ../../any.pm_.c:177 -msgid "Bootloader main options" -msgstr "Glavne opcije bootloadera" - -#: ../../any.pm_.c:146 ../../any.pm_.c:178 -msgid "Bootloader to use" -msgstr "Bootloader koji ćete koristiti" - -#: ../../any.pm_.c:148 -msgid "Bootloader installation" -msgstr "Bootloader instalacija" - -#: ../../any.pm_.c:150 ../../any.pm_.c:180 -msgid "Boot device" -msgstr "Boot uređaj" - -#: ../../any.pm_.c:151 -msgid "LBA (doesn't work on old BIOSes)" -msgstr "LBA (ne radi na starim BIOSima)" - -#: ../../any.pm_.c:152 -msgid "Compact" -msgstr "Kompaktno" - -#: ../../any.pm_.c:152 -msgid "compact" -msgstr "kompaktno" - -#: ../../any.pm_.c:153 ../../any.pm_.c:250 -msgid "Video mode" -msgstr "Video mod" - -#: ../../any.pm_.c:155 -msgid "Delay before booting default image" -msgstr "Čekanje prije bootanja default preslike" - -#: ../../any.pm_.c:157 ../../any.pm_.c:730 -#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46 -#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481 -#: ../../standalone/draknet_.c:603 -msgid "Password" -msgstr "Šifra" - -#: ../../any.pm_.c:158 ../../any.pm_.c:731 -#: ../../install_steps_interactive.pm_.c:939 -msgid "Password (again)" -msgstr "Šifra (ponovo)" - -#: ../../any.pm_.c:159 -msgid "Restrict command line options" -msgstr "Ograniči opcije komandne linije" - -#: ../../any.pm_.c:159 -msgid "restrict" -msgstr "ograniči" - -#: ../../any.pm_.c:161 -msgid "Clean /tmp at each boot" -msgstr "Čisti /tmp prilikom svakog boota" - -#: ../../any.pm_.c:162 -#, c-format -msgid "Precise RAM size if needed (found %d MB)" -msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)" - -#: ../../any.pm_.c:164 -msgid "Enable multi profiles" -msgstr "Omogući više profila" - -#: ../../any.pm_.c:168 -msgid "Give the ram size in MB" -msgstr "Navedite veličinu rama u MB" - -#: ../../any.pm_.c:170 -msgid "" -"Option ``Restrict command line options'' is of no use without a password" -msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre" - -#: ../../any.pm_.c:171 ../../any.pm_.c:707 -#: ../../install_steps_interactive.pm_.c:933 -msgid "Please try again" -msgstr "Molimo pokušajte ponovo" - -#: ../../any.pm_.c:171 ../../any.pm_.c:707 -#: ../../install_steps_interactive.pm_.c:933 -msgid "The passwords do not match" -msgstr "Šifre se ne poklapaju" - -#: ../../any.pm_.c:179 -msgid "Init Message" -msgstr "Init Poruka" - -#: ../../any.pm_.c:181 -msgid "Open Firmware Delay" -msgstr "Otvori čekanje firmware-a" - -#: ../../any.pm_.c:182 -msgid "Kernel Boot Timeout" -msgstr "Kernel Boot Timeout" - -#: ../../any.pm_.c:183 -msgid "Enable CD Boot?" -msgstr "Omogući boot sa CDa?" - -#: ../../any.pm_.c:184 -msgid "Enable OF Boot?" -msgstr "Omogući boot sa OFa?" - -#: ../../any.pm_.c:185 -msgid "Default OS?" -msgstr "Default OS?" - -#: ../../any.pm_.c:207 -msgid "" -"Here are the different entries.\n" -"You can add some more or change the existing ones." -msgstr "" -"Navedene su razne stavke.\n" -"Možete dodati nove ili promjeniti postojeće." - -#: ../../any.pm_.c:217 -msgid "Add" -msgstr "Dodaj" - -#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161 -#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846 -#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904 -#: ../../printerdrake.pm_.c:1948 -msgid "Done" -msgstr "Gotovo" - -#: ../../any.pm_.c:217 -msgid "Modify" -msgstr "Izmjeni" - -#: ../../any.pm_.c:225 -msgid "Which type of entry do you want to add?" -msgstr "Koju vrstu stavke želite dodati?" - -#: ../../any.pm_.c:226 -msgid "Linux" -msgstr "Linux" - -#: ../../any.pm_.c:226 -msgid "Other OS (SunOS...)" -msgstr "Ostali OSi (SunOS...)" - -#: ../../any.pm_.c:227 -msgid "Other OS (MacOS...)" -msgstr "Ostali OSi (MacOS...)" - -#: ../../any.pm_.c:227 -msgid "Other OS (windows...)" -msgstr "Ostali OSi (windows...)" - -#: ../../any.pm_.c:246 -msgid "Image" -msgstr "Preslika" - -#: ../../any.pm_.c:247 ../../any.pm_.c:258 -msgid "Root" -msgstr "Root" - -#: ../../any.pm_.c:248 ../../any.pm_.c:277 -msgid "Append" -msgstr "Append" - -#: ../../any.pm_.c:252 -msgid "Initrd" -msgstr "Initrd" - -#: ../../any.pm_.c:253 -msgid "Read-write" -msgstr "Čitaj-piši" - -#: ../../any.pm_.c:260 -msgid "Table" -msgstr "Tabela" - -#: ../../any.pm_.c:261 -msgid "Unsafe" -msgstr "Nesigurno" - -#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276 -msgid "Label" -msgstr "Labela" - -#: ../../any.pm_.c:270 ../../any.pm_.c:281 -msgid "Default" -msgstr "Default" - -#: ../../any.pm_.c:278 -msgid "Initrd-size" -msgstr "Initrd-veličina" - -#: ../../any.pm_.c:280 -msgid "NoVideo" -msgstr "NoVideo" - -#: ../../any.pm_.c:288 -msgid "Remove entry" -msgstr "Ukloni stavku" - -#: ../../any.pm_.c:291 -msgid "Empty label not allowed" -msgstr "Prazna labela nije dozvoljena" - -#: ../../any.pm_.c:292 -msgid "This label is already used" -msgstr "Ova labela je već u upotrebi" - -#: ../../any.pm_.c:597 -#, c-format -msgid "Found %s %s interfaces" -msgstr "Pronađeno %s %s interfejsa" - -#: ../../any.pm_.c:598 -msgid "Do you have another one?" -msgstr "Imate li neki drugi?" - -#: ../../any.pm_.c:599 -#, c-format -msgid "Do you have any %s interfaces?" -msgstr "Imate li ijedan %s interfejs?" - -#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112 -#: ../../my_gtk.pm_.c:715 -msgid "No" -msgstr "Ne" - -#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112 -#: ../../my_gtk.pm_.c:715 -msgid "Yes" -msgstr "Da" - -#: ../../any.pm_.c:602 -msgid "See hardware info" -msgstr "Pogledaj hardware info" - -#. -PO: the first %s is the card type (scsi, network, sound,...) -#. -PO: the second is the vendor+model name -#: ../../any.pm_.c:637 -#, c-format -msgid "Installing driver for %s card %s" -msgstr "Instaliram drajver za %s karticu %s" - -#: ../../any.pm_.c:638 -#, c-format -msgid "(module %s)" -msgstr "(modul %s)" - -#. -PO: the %s is the driver type (scsi, network, sound,...) -#: ../../any.pm_.c:649 -#, c-format -msgid "Which %s driver should I try?" -msgstr "Koji %s drajver ću pokušati?" - -#: ../../any.pm_.c:657 -#, c-format -msgid "" -"In some cases, the %s driver needs to have extra information to work\n" -"properly, although it normally works fine without. Would you like to " -"specify\n" -"extra options for it or allow the driver to probe your machine for the\n" -"information it needs? Occasionally, probing will hang a computer, but it " -"should\n" -"not cause any damage." -msgstr "" -"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n" -"ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n" -"ekstra opcije za njega ili dozvoliti drajveru da ispita vašu mašinu za sve\n" -"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n" -"ali ne bi trebalo izazvati nikakvu štetu." - -#: ../../any.pm_.c:662 -msgid "Autoprobe" -msgstr "Ispitivanje" - -#: ../../any.pm_.c:662 -msgid "Specify options" -msgstr "Navedi opcije" - -#: ../../any.pm_.c:666 -#, c-format -msgid "You may now provide its options to module %s." -msgstr "Sada možete navesti opcije modulu %s." - -#: ../../any.pm_.c:672 -#, c-format -msgid "" -"You may now provide its options to module %s.\n" -"Options are in format ``name=value name2=value2 ...''.\n" -"For instance, ``io=0x300 irq=7''" -msgstr "" -"Sada možete navesti opcije modulu %s. Opcije su u formatu ``ime=vrijednost " -"ime2=vrijednost2 ...''.\n" -"Na primjer, ``io=0x300 irq=7''" - -#: ../../any.pm_.c:675 -msgid "Module options:" -msgstr "Opcije modula" - -#: ../../any.pm_.c:686 -#, c-format -msgid "" -"Loading module %s failed.\n" -"Do you want to try again with other parameters?" -msgstr "" -"Učitavanje modula %s nije uspjelo.\n" -"Želite li probati opet sa drugim parametrima?" - -#: ../../any.pm_.c:704 -#, c-format -msgid "(already added %s)" -msgstr "(već dodan %s)" - -#: ../../any.pm_.c:708 -msgid "This password is too simple" -msgstr "Ova šifra je previše jednostavna" - -#: ../../any.pm_.c:709 -msgid "Please give a user name" -msgstr "Molimo navedite korisničko ime" - -#: ../../any.pm_.c:710 -msgid "" -"The user name must contain only lower cased letters, numbers, `-' and `_'" -msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'" - -#: ../../any.pm_.c:711 -msgid "This user name is already added" -msgstr "Ovo korisničko ime je već dodano" - -#: ../../any.pm_.c:715 -msgid "Add user" -msgstr "Dodaj korisnika" - -#: ../../any.pm_.c:716 -#, c-format -msgid "" -"Enter a user\n" -"%s" -msgstr "" -"Unesite korisnika\n" -"%s" - -#: ../../any.pm_.c:717 -msgid "Accept user" -msgstr "Prihvati korisnika" - -#: ../../any.pm_.c:728 -msgid "Real name" -msgstr "Pravo ime" - -#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401 -#: ../../printerdrake.pm_.c:480 -msgid "User name" -msgstr "Korisničko ime" - -#: ../../any.pm_.c:732 -msgid "Shell" -msgstr "Shell" - -#: ../../any.pm_.c:734 -msgid "Icon" -msgstr "Ikona" - -#: ../../any.pm_.c:756 -msgid "Autologin" -msgstr "Autologin" - -#: ../../any.pm_.c:757 -msgid "" -"I can set up your computer to automatically log on one user.\n" -"Do you want to use this feature?" -msgstr "" -"Mogu podesiti vaš računar da automatski prijavi jednog korisnika.\n" -"Želite li koristiti ovu mogućnost?" - -#: ../../any.pm_.c:761 -msgid "Choose the default user:" -msgstr "Izaberite default korisnika:" - -#: ../../any.pm_.c:762 -msgid "Choose the window manager to run:" -msgstr "Izaberite window manager koji će se pokretati:" - -#: ../../any.pm_.c:771 -msgid "Please, choose a language to use." -msgstr "Molimo izaberite jezik koji ćete koristiti" - -#: ../../any.pm_.c:773 -msgid "You can choose other languages that will be available after install" -msgstr "Možete izabrati i druge jezike koji će biti dostupni nakon instalacije" - -#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633 -msgid "All" -msgstr "Svi" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#: ../../bootloader.pm_.c:259 -#, c-format -msgid "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system in the list above or\n" -"wait %d seconds for default boot.\n" -"\n" -msgstr "" -"Dobro došli u %s izbornik operativnog sistema!\n" -"\n" -"Izaberite operativni sistem na listi gore ili\n" -"sačekajte %d sekundi do default boota.\n" -"\n" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:835 -msgid "Welcome to GRUB the operating system chooser!" -msgstr "Dobro došli u GRUB izbornik operativnog sistema!" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:838 -#, c-format -msgid "Use the %c and %c keys for selecting which entry is highlighted." -msgstr "Koristite tipke %c i %c za izbor jedne od stavki." - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:841 -msgid "Press enter to boot the selected OS, 'e' to edit the" -msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:844 -msgid "commands before booting, or 'c' for a command-line." -msgstr "komandi prije bootanja, ili 'c' za komandnu liniju." - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:847 -#, c-format -msgid "The highlighted entry will be booted automatically in %d seconds." -msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi." - -#: ../../bootloader.pm_.c:851 -msgid "not enough room in /boot" -msgstr "nema dovoljno prostora u /boot" - -#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows -#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language -#: ../../bootloader.pm_.c:951 -msgid "Desktop" -msgstr "Desktop" - -#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows -#: ../../bootloader.pm_.c:953 -msgid "Start Menu" -msgstr "Start Menu" - -#: ../../bootloader.pm_.c:972 -#, c-format -msgid "You can't install the bootloader on a %s partition\n" -msgstr "Ne možete instalirati bootloader na %s particiju\n" - -#: ../../bootlook.pm_.c:46 -msgid "no help implemented yet.\n" -msgstr "pomoć još nije implementirana.\n" - -#: ../../bootlook.pm_.c:62 -msgid "Boot Style Configuration" -msgstr "Konfiguracija stila boota" - -#: ../../bootlook.pm_.c:79 -msgid "/_File" -msgstr "/_Datoteka" - -#: ../../bootlook.pm_.c:80 -msgid "/File/_Quit" -msgstr "/Datoteka/_Izlaz" - -#: ../../bootlook.pm_.c:80 -msgid "<control>Q" -msgstr "<control>I" - -#: ../../bootlook.pm_.c:91 -msgid "NewStyle Categorizing Monitor" -msgstr "NewStyle Categorizing Monitor" - -#: ../../bootlook.pm_.c:92 -msgid "NewStyle Monitor" -msgstr "NewStyle Monitor" - -#: ../../bootlook.pm_.c:93 -msgid "Traditional Monitor" -msgstr "Tradicionalni Monitor" - -#: ../../bootlook.pm_.c:94 -msgid "Traditional Gtk+ Monitor" -msgstr "Tradicionalni Gtk+ Monitor" - -#: ../../bootlook.pm_.c:95 -msgid "Launch Aurora at boot time" -msgstr "Pokreni Aurora-u prilikom boota" - -#: ../../bootlook.pm_.c:100 -msgid "Lilo/grub mode" -msgstr "Lilo/grub mod" - -#: ../../bootlook.pm_.c:102 -#, c-format -msgid "" -"You are currently using %s as Boot Manager.\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"Trenutno koristite %s kao boot manager.\n" -"Kliknite na Konfiguriši kako bi se pokrenuo čarobnjak za podešavanje." - -#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643 -#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57 -msgid "Configure" -msgstr "Konfiguriši" - -#: ../../bootlook.pm_.c:108 -msgid "Boot mode" -msgstr "Boot mod" - -#: ../../bootlook.pm_.c:136 -msgid "System mode" -msgstr "Sistem mod" - -#: ../../bootlook.pm_.c:138 -msgid "Launch the X-Window system at start" -msgstr "Pokreni X-Window sistem na startu" - -#: ../../bootlook.pm_.c:143 -msgid "No, I don't want autologin" -msgstr "Ne, ne želim da se autologiram" - -#: ../../bootlook.pm_.c:145 -msgid "Yes, I want autologin with this (user, desktop)" -msgstr "Da, želim da se autologiram sa ovim (korisnik, desktop)" - -#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108 -#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208 -#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433 -#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543 -#: ../../standalone/draknet_.c:644 -msgid "OK" -msgstr "OK" - -#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516 -#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286 -#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27 -#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716 -#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648 -#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147 -#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519 -#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63 -msgid "Cancel" -msgstr "Odustani" - -#: ../../bootlook.pm_.c:224 -#, c-format -msgid "can not open /etc/inittab for reading: %s" -msgstr "ne mogu otvoriti /etc/inittab za čitanje: %s" - -#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47 -msgid "Installation of LILO failed. The following error occured:" -msgstr "Instalacija LILOa nije uspjela. Javila se sljedeća greška:" - -#: ../../common.pm_.c:93 -msgid "GB" -msgstr "GB" - -#: ../../common.pm_.c:93 -msgid "KB" -msgstr "KB" - -#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287 -#: ../../install_steps_graphical.pm_.c:334 -msgid "MB" -msgstr "MB" - -#: ../../common.pm_.c:101 -msgid "TB" -msgstr "TB" - -#: ../../common.pm_.c:109 -#, c-format -msgid "%d minutes" -msgstr "%d minuta" - -#: ../../common.pm_.c:111 -msgid "1 minute" -msgstr "1 minuta" - -#: ../../common.pm_.c:113 -#, c-format -msgid "%d seconds" -msgstr "%d sekundi" - -#: ../../diskdrake.pm_.c:100 -msgid "Please make a backup of your data first" -msgstr "Molimo najprije napravite backup vaših podataka" - -#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801 -#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864 -msgid "Read carefully!" -msgstr "Pročitajte pažljivo!" - -#: ../../diskdrake.pm_.c:103 -msgid "" -"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " -"enough)\n" -"at the beginning of the disk" -msgstr "" -"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora " -"(2048 sektora je dovoljno)\n" -"na početku diska" - -#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313 -#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72 -#: ../../install_steps_interactive.pm_.c:37 -#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119 -#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62 -msgid "Error" -msgstr "Greška" - -#: ../../diskdrake.pm_.c:159 -msgid "Wizard" -msgstr "Čarobnjak" - -#: ../../diskdrake.pm_.c:181 -msgid "New" -msgstr "Novi" - -#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206 -msgid "Remote" -msgstr "Udaljeni" - -#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479 -#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523 -msgid "Mount point" -msgstr "Tačka montiranja" - -#: ../../diskdrake.pm_.c:209 -msgid "Options" -msgstr "Opcije" - -#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417 -#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353 -#: ../../diskdrake_interactive.pm_.c:488 -msgid "Type" -msgstr "Tip" - -#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361 -msgid "Unmount" -msgstr "Demontiraj" - -#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357 -msgid "Mount" -msgstr "Montiraj" - -#: ../../diskdrake.pm_.c:228 -msgid "Choose action" -msgstr "Izaberi akciju" - -#: ../../diskdrake.pm_.c:235 -msgid "" -"You have one big FAT partition\n" -"(generally used by MicroSoft Dos/Windows).\n" -"I suggest you first resize that partition\n" -"(click on it, then click on \"Resize\")" -msgstr "" -"Imate jednu veliku FAT particiju\n" -"(koju najvjerovatnije koristi MicroSoft Dos/Windows).\n" -"Predlažem da najprije promjenite veličinu te particije\n" -"(kliknite na nju, zatim na \"Promjeni veličinu\")" - -#: ../../diskdrake.pm_.c:238 -msgid "Please click on a partition" -msgstr "Molimo kliknite na particiju" - -#: ../../diskdrake.pm_.c:240 -msgid "Please click on a media" -msgstr "Molimo kliknite na medij" - -#: ../../diskdrake.pm_.c:243 -msgid "" -"Please click on a button above\n" -"\n" -"Or use \"New\"" -msgstr "" -"Molimo kliknite na dugme iznad\n" -"\n" -"Ili koristite \"Nova\"" - -#: ../../diskdrake.pm_.c:244 -msgid "Use \"New\"" -msgstr "Koristi \"Nova\"" - -#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517 -msgid "Details" -msgstr "Detalji" - -#: ../../diskdrake.pm_.c:395 -msgid "Ext2" -msgstr "Ext2" - -#: ../../diskdrake.pm_.c:395 -msgid "FAT" -msgstr "FAT" - -#: ../../diskdrake.pm_.c:395 -msgid "HFS" -msgstr "HFS" - -#: ../../diskdrake.pm_.c:395 -msgid "Journalised FS" -msgstr "Journalised FS" - -#: ../../diskdrake.pm_.c:395 -msgid "SunOS" -msgstr "SunOS" - -#: ../../diskdrake.pm_.c:395 -msgid "Swap" -msgstr "Swap" - -#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952 -msgid "Empty" -msgstr "Prazno" - -#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373 -#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161 -#: ../../services.pm_.c:161 -msgid "Other" -msgstr "Ostalo" - -#: ../../diskdrake.pm_.c:400 -msgid "Filesystem types:" -msgstr "Tipovi file sistema:" - -#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375 -msgid "Create" -msgstr "Kreiraj" - -#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419 -#, c-format -msgid "Use ``%s'' instead" -msgstr "Koristite ``%s'' umjesto toga" - -#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362 -msgid "Delete" -msgstr "Obriši" - -#: ../../diskdrake.pm_.c:423 -msgid "Use ``Unmount'' first" -msgstr "Najprije koristite ``Demontiraj''" - -#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480 -#, c-format -msgid "" -"After changing type of partition %s, all data on this partition will be lost" -msgstr "" -"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti " -"izgubljeni" - -#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522 -#, c-format -msgid "Where do you want to mount device %s?" -msgstr "Gdje želite montirati uređaj %s?" - -#: ../../diskdrake.pm_.c:500 -msgid "Mount options" -msgstr "Opcije montiranja" - -#: ../../diskdrake.pm_.c:507 -msgid "Various" -msgstr "Razni" - -#: ../../diskdrake.pm_.c:525 -msgid "Removable media" -msgstr "Izmjenjivi medij" - -#: ../../diskdrake.pm_.c:532 -msgid "Change type" -msgstr "Promjeni tip" - -#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487 -msgid "Which filesystem do you want?" -msgstr "Koji datotečni sistem želite?" - -#: ../../diskdrake.pm_.c:564 -msgid "Scanning available nfs shared resource" -msgstr "Pretraga dostupnih nfs dijeljenih resursa" - -#: ../../diskdrake.pm_.c:569 -#, c-format -msgid "Scanning available nfs shared resource of server %s" -msgstr "Pretraga dostupnih nfs dijeljenih resursa na serveru %s" - -#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648 -msgid "If the list above doesn't contain the wanted entry, enter it here:" -msgstr "Ako gornja lista ne sadrži ispravnu stavku, unesite je ovdje:" - -#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651 -msgid "Server" -msgstr "Server" - -#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652 -msgid "Shared resource" -msgstr "Dijeljeni resurs" - -#: ../../diskdrake.pm_.c:615 -msgid "Scanning available samba shared resource" -msgstr "Pretraga dostupnih samba dijeljenih resursa" - -#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639 -#, c-format -msgid "Scanning available samba shared resource of server %s" -msgstr "Pretraga dostupnih samba dijeljenih resursa na serveru %s" - -#: ../../diskdrake_interactive.pm_.c:163 -msgid "Choose a partition" -msgstr "Izaberi particiju" - -#: ../../diskdrake_interactive.pm_.c:163 -msgid "Choose another partition" -msgstr "Izaberi drugu particiju" - -#: ../../diskdrake_interactive.pm_.c:188 -msgid "Exit" -msgstr "Izlaz" - -#: ../../diskdrake_interactive.pm_.c:210 -msgid "Toggle to expert mode" -msgstr "Prebaci u ekspertni mod" - -#: ../../diskdrake_interactive.pm_.c:210 -msgid "Toggle to normal mode" -msgstr "Prebaci u normalni mod" - -#: ../../diskdrake_interactive.pm_.c:210 -msgid "Undo" -msgstr "Poništi" - -#: ../../diskdrake_interactive.pm_.c:229 -msgid "Continue anyway?" -msgstr "Svejedno nastavljate?" - -#: ../../diskdrake_interactive.pm_.c:234 -msgid "Quit without saving" -msgstr "Izlaz bez spašavanja" - -#: ../../diskdrake_interactive.pm_.c:234 -msgid "Quit without writing the partition table?" -msgstr "Izlazite bez pisanja tabele particija?" - -#: ../../diskdrake_interactive.pm_.c:237 -msgid "Do you want to save /etc/fstab modifications" -msgstr "Želite li spasiti izmjene /etc/fstab" - -#: ../../diskdrake_interactive.pm_.c:247 -msgid "Auto allocate" -msgstr "Auto alokacija" - -#: ../../diskdrake_interactive.pm_.c:247 -msgid "Clear all" -msgstr "Obriši sve" - -#: ../../diskdrake_interactive.pm_.c:247 -#: ../../install_steps_interactive.pm_.c:171 -msgid "More" -msgstr "Još" - -#: ../../diskdrake_interactive.pm_.c:250 -msgid "Hard drive information" -msgstr "Informacije o hard disku" - -#: ../../diskdrake_interactive.pm_.c:267 -msgid "Not enough space for auto-allocating" -msgstr "Nema dovoljno prostora za auto-alokaciju" - -#: ../../diskdrake_interactive.pm_.c:273 -msgid "All primary partitions are used" -msgstr "Sve primarne particije su u upotrebi" - -#: ../../diskdrake_interactive.pm_.c:274 -msgid "I can't add any more partition" -msgstr "Ne mogu dodati više particija" - -#: ../../diskdrake_interactive.pm_.c:275 -msgid "" -"To have more partitions, please delete one to be able to create an extended " -"partition" -msgstr "" -"Da biste imali još particija, molimo pobrišite jednu kako bi se mogla " -"kreirati extended particija" - -#: ../../diskdrake_interactive.pm_.c:285 -msgid "Save partition table" -msgstr "Snimi tabelu particija" - -#: ../../diskdrake_interactive.pm_.c:286 -msgid "Restore partition table" -msgstr "Vrati tabelu particija" - -#: ../../diskdrake_interactive.pm_.c:287 -msgid "Rescue partition table" -msgstr "Spasi tabelu particija" - -#: ../../diskdrake_interactive.pm_.c:289 -msgid "Reload partition table" -msgstr "Ponovo učitaj tabelu particija" - -#: ../../diskdrake_interactive.pm_.c:293 -msgid "Removable media automounting" -msgstr "Automatsko montiranje izmjenjivog medija" - -#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321 -msgid "Select file" -msgstr "Izaberite datoteku" - -#: ../../diskdrake_interactive.pm_.c:308 -msgid "" -"The backup partition table has not the same size\n" -"Still continue?" -msgstr "" -"Backup tabela particija nema istu veličinu\n" -"Ipak nastavljate?" - -#: ../../diskdrake_interactive.pm_.c:322 -msgid "Warning" -msgstr "Upozorenje" - -#: ../../diskdrake_interactive.pm_.c:323 -msgid "" -"Insert a floppy in drive\n" -"All data on this floppy will be lost" -msgstr "" -"Ubacite disketu u jedinicu\n" -"Svi podaci na toj disketi će biti izgubljeni" - -#: ../../diskdrake_interactive.pm_.c:334 -msgid "Trying to rescue partition table" -msgstr "Pokušavam da spasim tabelu particija" - -#: ../../diskdrake_interactive.pm_.c:340 -msgid "Detailed information" -msgstr "Detaljne informacije" - -#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590 -msgid "Resize" -msgstr "Promjeni veličinu" - -#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630 -msgid "Move" -msgstr "Premještanje" - -#: ../../diskdrake_interactive.pm_.c:356 -msgid "Format" -msgstr "Formatiraj" - -#: ../../diskdrake_interactive.pm_.c:358 -msgid "Active" -msgstr "Aktivna" - -#: ../../diskdrake_interactive.pm_.c:359 -msgid "Add to RAID" -msgstr "Dodaj na RAID" - -#: ../../diskdrake_interactive.pm_.c:360 -msgid "Add to LVM" -msgstr "Dodaj na LVM" - -#: ../../diskdrake_interactive.pm_.c:363 -msgid "Remove from RAID" -msgstr "Ukloni sa RAIDa" - -#: ../../diskdrake_interactive.pm_.c:364 -msgid "Remove from LVM" -msgstr "Ukloni sa LVMa" - -#: ../../diskdrake_interactive.pm_.c:365 -msgid "Modify RAID" -msgstr "Modificiraj RAID" - -#: ../../diskdrake_interactive.pm_.c:366 -msgid "Use for loopback" -msgstr "Koristi za loopback" - -#: ../../diskdrake_interactive.pm_.c:409 -msgid "Create a new partition" -msgstr "Napravi novu particiju" - -#: ../../diskdrake_interactive.pm_.c:412 -msgid "Start sector: " -msgstr "Početni sektor: " - -#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732 -msgid "Size in MB: " -msgstr "Veličina u MB: " - -#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733 -msgid "Filesystem type: " -msgstr "Tip datotečnog sistema: " - -#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936 -#: ../../diskdrake_interactive.pm_.c:1010 -msgid "Mount point: " -msgstr "Tačka montiranja: " - -#: ../../diskdrake_interactive.pm_.c:420 -msgid "Preference: " -msgstr "Preference: " - -#: ../../diskdrake_interactive.pm_.c:462 -msgid "Remove the loopback file?" -msgstr "Ukloniti loopback datoteku?" - -#: ../../diskdrake_interactive.pm_.c:486 -msgid "Change partition type" -msgstr "Izmjena tipa particije" - -#: ../../diskdrake_interactive.pm_.c:491 -msgid "Switching from ext2 to ext3" -msgstr "Prebacujem sa ext2 na ext3" - -#: ../../diskdrake_interactive.pm_.c:521 -#, c-format -msgid "Where do you want to mount loopback file %s?" -msgstr "Gdje želite montirati loopback datoteku %s?" - -#: ../../diskdrake_interactive.pm_.c:528 -msgid "" -"Can't unset mount point as this partition is used for loop back.\n" -"Remove the loopback first" -msgstr "" -"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za " -"loopback.\n" -"Najprije uklonite loopback" - -#: ../../diskdrake_interactive.pm_.c:549 -msgid "Computing FAT filesystem bounds" -msgstr "Izračunavam granice FAT filesistema" - -#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605 -#: ../../install_interactive.pm_.c:116 -msgid "Resizing" -msgstr "Mijenjam veličinu" - -#: ../../diskdrake_interactive.pm_.c:578 -msgid "This partition is not resizeable" -msgstr "Ovoj particiji ne možete mijenjati veličinu" - -#: ../../diskdrake_interactive.pm_.c:583 -msgid "All data on this partition should be backed-up" -msgstr "Svi podaci na toj particiji bi trebali biti backupovani" - -#: ../../diskdrake_interactive.pm_.c:585 -#, c-format -msgid "After resizing partition %s, all data on this partition will be lost" -msgstr "" -"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni" - -#: ../../diskdrake_interactive.pm_.c:590 -msgid "Choose the new size" -msgstr "Izaberite novu veličinu" - -#: ../../diskdrake_interactive.pm_.c:591 -msgid "New size in MB: " -msgstr "Nova veličina u MB: " - -#: ../../diskdrake_interactive.pm_.c:631 -msgid "Which disk do you want to move it to?" -msgstr "Na koji disk je želite premjestiti?" - -#: ../../diskdrake_interactive.pm_.c:632 -msgid "Sector" -msgstr "Sektor" - -#: ../../diskdrake_interactive.pm_.c:633 -msgid "Which sector do you want to move it to?" -msgstr "Na koji sektor je želite premjestiti?" - -#: ../../diskdrake_interactive.pm_.c:636 -msgid "Moving" -msgstr "Premještam" - -#: ../../diskdrake_interactive.pm_.c:636 -msgid "Moving partition..." -msgstr "Premještam particiju..." - -#: ../../diskdrake_interactive.pm_.c:657 -msgid "Choose an existing RAID to add to" -msgstr "Izaberite postojeći RAID na koji ćete dodati" - -#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676 -msgid "new" -msgstr "novi" - -#: ../../diskdrake_interactive.pm_.c:674 -msgid "Choose an existing LVM to add to" -msgstr "Izaberite postojeći LVM na koji ćete dodati" - -#: ../../diskdrake_interactive.pm_.c:679 -msgid "LVM name?" -msgstr "Naziv LVMa?" - -#: ../../diskdrake_interactive.pm_.c:718 -msgid "This partition can't be used for loopback" -msgstr "Ova particija se ne može koristiti za loopback" - -#: ../../diskdrake_interactive.pm_.c:730 -msgid "Loopback" -msgstr "Loopback" - -#: ../../diskdrake_interactive.pm_.c:731 -msgid "Loopback file name: " -msgstr "Naziv loopback datoteke: " - -#: ../../diskdrake_interactive.pm_.c:736 -msgid "Give a file name" -msgstr "Dajte naziv datoteke" - -#: ../../diskdrake_interactive.pm_.c:739 -msgid "File already used by another loopback, choose another one" -msgstr "Datoteku već koristi drugi loopback, izaberite drugo ime" - -#: ../../diskdrake_interactive.pm_.c:740 -msgid "File already exists. Use it?" -msgstr "Datoteka već postoji. Želite li je koristiti?" - -#: ../../diskdrake_interactive.pm_.c:784 -msgid "device" -msgstr "uređaj" - -#: ../../diskdrake_interactive.pm_.c:785 -msgid "level" -msgstr "nivo" - -#: ../../diskdrake_interactive.pm_.c:786 -msgid "chunk size" -msgstr "veličina chunka" - -#: ../../diskdrake_interactive.pm_.c:801 -msgid "Be careful: this operation is dangerous." -msgstr "Budite oprezni: ova operacija je opasna" - -#: ../../diskdrake_interactive.pm_.c:816 -msgid "What type of partitioning?" -msgstr "Koju vrstu particioniranja?" - -#: ../../diskdrake_interactive.pm_.c:834 -msgid "" -"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " -"1024).\n" -"Either you use LILO and it won't work, or you don't use LILO and you don't " -"need /boot" -msgstr "" -"Žao mi je, ali još uvijek neću prihvatiti kreiranje /boota na drajvu (na " -"cilindru >1024).\n" -"Ili ćete koristiti LILO i stvar neće raditi, ili nećete koristiti LILO pa " -"vam ne treba ni /boot" - -#: ../../diskdrake_interactive.pm_.c:838 -msgid "" -"The partition you've selected to add as root (/) is physically located " -"beyond\n" -"the 1024th cylinder of the hard drive, and you have no /boot partition.\n" -"If you plan to use the LILO boot manager, be careful to add a /boot partition" -msgstr "" -"Particija koju ste izabrali da dodate kao root (/) je fizički locirana " -"iznad\n" -"1024og cilindra hard diska, tako da nemate /boot particiju.\n" -"Ako planirate koristiti LILO boot manager, pazite da dodate /boot particiju" - -#: ../../diskdrake_interactive.pm_.c:844 -msgid "" -"You've selected a software RAID partition as root (/).\n" -"No bootloader is able to handle this without a /boot partition.\n" -"So be careful to add a /boot partition" -msgstr "" -"Izabrali ste softversku RAID particiju kao root (/).\n" -"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n" -"Pazite da dodate /boot particiju" - -#: ../../diskdrake_interactive.pm_.c:864 -#, c-format -msgid "Partition table of drive %s is going to be written to disk!" -msgstr "Tabela particija za drajv %s će biti zapisana na disk!" - -#: ../../diskdrake_interactive.pm_.c:868 -msgid "You'll need to reboot before the modification can take place" -msgstr "" -"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu" - -#: ../../diskdrake_interactive.pm_.c:879 -#, c-format -msgid "After formatting partition %s, all data on this partition will be lost" -msgstr "" -"Nakon formatiranja particije %s, svi podaci na toj particiji će biti " -"izgubljeni" - -#: ../../diskdrake_interactive.pm_.c:881 -msgid "Formatting" -msgstr "Formatiram" - -#: ../../diskdrake_interactive.pm_.c:882 -#, c-format -msgid "Formatting loopback file %s" -msgstr "Formatiram loopback datoteku %s" - -#: ../../diskdrake_interactive.pm_.c:883 -#: ../../install_steps_interactive.pm_.c:419 -#, c-format -msgid "Formatting partition %s" -msgstr "Formatiram particiju %s" - -#: ../../diskdrake_interactive.pm_.c:894 -msgid "Hide files" -msgstr "Sakrij datoteke" - -#: ../../diskdrake_interactive.pm_.c:894 -msgid "Move files to the new partition" -msgstr "Prebaci datoteke na novu particiju" - -#: ../../diskdrake_interactive.pm_.c:895 -#, c-format -msgid "" -"Directory %s already contain some data\n" -"(%s)" -msgstr "" -"Direktorij %s već sadrži neke podatke\n" -"(%s)" - -#: ../../diskdrake_interactive.pm_.c:906 -msgid "Moving files to the new partition" -msgstr "Premještam datoteke na novu particiju" - -#: ../../diskdrake_interactive.pm_.c:910 -#, c-format -msgid "Copying %s" -msgstr "Kopiram %s" - -#: ../../diskdrake_interactive.pm_.c:914 -#, c-format -msgid "Removing %s" -msgstr "Uklanjam %s" - -#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996 -msgid "Device: " -msgstr "Uređaj: " - -#: ../../diskdrake_interactive.pm_.c:938 -#, c-format -msgid "DOS drive letter: %s (just a guess)\n" -msgstr "DOS naziv drajva: %s (pretpostavka)\n" - -#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950 -#: ../../diskdrake_interactive.pm_.c:1014 -msgid "Type: " -msgstr "Tip: " - -#: ../../diskdrake_interactive.pm_.c:946 -msgid "Name: " -msgstr "Ime: " - -#: ../../diskdrake_interactive.pm_.c:954 -#, c-format -msgid "Start: sector %s\n" -msgstr "Početak: sector %s\n" - -#: ../../diskdrake_interactive.pm_.c:955 -#, c-format -msgid "Size: %s" -msgstr "Veličina: %s" - -#: ../../diskdrake_interactive.pm_.c:957 -#, c-format -msgid ", %s sectors" -msgstr ", %s sektora" - -#: ../../diskdrake_interactive.pm_.c:959 -#, c-format -msgid "Cylinder %d to cylinder %d\n" -msgstr "Cilindar %d do cilindra %d\n" - -#: ../../diskdrake_interactive.pm_.c:960 -msgid "Formatted\n" -msgstr "Formatirana\n" - -#: ../../diskdrake_interactive.pm_.c:961 -msgid "Not formatted\n" -msgstr "Nije formatirana\n" - -#: ../../diskdrake_interactive.pm_.c:962 -msgid "Mounted\n" -msgstr "Montirana\n" - -#: ../../diskdrake_interactive.pm_.c:963 -#, c-format -msgid "RAID md%s\n" -msgstr "RAID md%s\n" - -#: ../../diskdrake_interactive.pm_.c:965 -#, c-format -msgid "" -"Loopback file(s):\n" -" %s\n" -msgstr "" -"Loopback datoteka(e):\n" -" %s\n" - -#: ../../diskdrake_interactive.pm_.c:966 -msgid "" -"Partition booted by default\n" -" (for MS-DOS boot, not for lilo)\n" -msgstr "" -"Particija koja se boota po defaultu\n" -" (za MS-DOS boot, ne za lilo)\n" - -#: ../../diskdrake_interactive.pm_.c:968 -#, c-format -msgid "Level %s\n" -msgstr "Nivo %s\n" - -#: ../../diskdrake_interactive.pm_.c:969 -#, c-format -msgid "Chunk size %s\n" -msgstr "Veličina chunka %s\n" - -#: ../../diskdrake_interactive.pm_.c:970 -#, c-format -msgid "RAID-disks %s\n" -msgstr "RAID-diskovi %s\n" - -#: ../../diskdrake_interactive.pm_.c:972 -#, c-format -msgid "Loopback file name: %s" -msgstr "Naziv loopback datoteke: %s" - -#: ../../diskdrake_interactive.pm_.c:975 -msgid "" -"\n" -"Chances are, this partition is\n" -"a Driver partition, you should\n" -"probably leave it alone.\n" -msgstr "" -"\n" -"Postoji mogućnost da je ova\n" -"particija Driver particija, vjerovatno\n" -"biste je trebali ostaviti na miru.\n" - -#: ../../diskdrake_interactive.pm_.c:978 -msgid "" -"\n" -"This special Bootstrap\n" -"partition is for\n" -"dual-booting your system.\n" -msgstr "" -"\n" -"Ova posebna Bootstrap\n" -"particija je za\n" -"dvojni boot vašeg sistema.\n" - -#: ../../diskdrake_interactive.pm_.c:997 -#, c-format -msgid "Size: %s\n" -msgstr "Veličina: %s\n" - -#: ../../diskdrake_interactive.pm_.c:998 -#, c-format -msgid "Geometry: %s cylinders, %s heads, %s sectors\n" -msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n" - -#: ../../diskdrake_interactive.pm_.c:999 -msgid "Info: " -msgstr "Info: " - -#: ../../diskdrake_interactive.pm_.c:1000 -#, c-format -msgid "LVM-disks %s\n" -msgstr "LVM-diskovi %s\n" - -#: ../../diskdrake_interactive.pm_.c:1001 -#, c-format -msgid "Partition table type: %s\n" -msgstr "Tip tabele particija: %s\n" - -#: ../../diskdrake_interactive.pm_.c:1002 -#, c-format -msgid "on bus %d id %d\n" -msgstr "na busu %d id %d\n" - -#: ../../diskdrake_interactive.pm_.c:1016 -#, c-format -msgid "Options: %s" -msgstr "Opcije: %s" - -#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465 -#: ../../fs.pm_.c:469 ../../fs.pm_.c:473 -#, c-format -msgid "%s formatting of %s failed" -msgstr "%s formatiranje %s nije uspjelo" - -#: ../../fs.pm_.c:506 -#, c-format -msgid "I don't know how to format %s in type %s" -msgstr "Ne znam kako formatirati %s tipa %s" - -#: ../../fs.pm_.c:568 -msgid "mount failed" -msgstr "montiranje nije uspjelo" - -#: ../../fs.pm_.c:588 -#, c-format -msgid "fsck failed with exit code %d or signal %d" -msgstr "fsck nije uspio, izlazni kod %d ili signal %d" - -#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560 -msgid "mount failed: " -msgstr "montiranje nije uspjelo: " - -#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556 -#, c-format -msgid "error unmounting %s: %s" -msgstr "greška u demontiranju %s: %s" - -#: ../../fsedit.pm_.c:21 -msgid "simple" -msgstr "jednostavno" - -#: ../../fsedit.pm_.c:30 -msgid "server" -msgstr "server" - -#: ../../fsedit.pm_.c:461 -msgid "You can't use JFS for partitions smaller than 16MB" -msgstr "Ne možete koristiti JFS za particije manje od 16MB" - -#: ../../fsedit.pm_.c:462 -msgid "You can't use ReiserFS for partitions smaller than 32MB" -msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB" - -#: ../../fsedit.pm_.c:471 -msgid "Mount points must begin with a leading /" -msgstr "Tačke montiranja moraju počinjati sa /" - -#: ../../fsedit.pm_.c:472 -#, c-format -msgid "There is already a partition with mount point %s\n" -msgstr "Već postoji particija sa tačkom montiranja %s\n" - -#: ../../fsedit.pm_.c:476 -#, c-format -msgid "You can't use a LVM Logical Volume for mount point %s" -msgstr "Ne možete koristiti LVM logički volumen za tačku montiranja %s" - -#: ../../fsedit.pm_.c:478 -msgid "This directory should remain within the root filesystem" -msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema" - -#: ../../fsedit.pm_.c:480 -msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" -msgstr "" -"Potreban vam je pravi file sistem (ext2, reiserfs) za ovu tačku montiranja\n" - -#: ../../fsedit.pm_.c:596 -#, c-format -msgid "Error opening %s for writing: %s" -msgstr "Greška u otvaranju %s za pisanje: %s" - -#: ../../fsedit.pm_.c:681 -msgid "" -"An error has occurred - no valid devices were found on which to create new " -"filesystems. Please check your hardware for the cause of this problem" -msgstr "" -"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu " -"kreirati novi file sistemi. Molimo provjerite vaš hardware i pronađite uzrok " -"greške" - -#: ../../fsedit.pm_.c:704 -msgid "You don't have any partitions!" -msgstr "Nemate nijednu particiju!" - -#: ../../help.pm_.c:13 -msgid "" -"GNU/Linux is a multiuser system, and this means that each user can have his\n" -"own preferences, his own files and so on. You can read the ``User Guide''\n" -"to learn more. But unlike \"root\", which is the administrator, the users\n" -"you will add here will not be entitled to change anything except their own\n" -"files and their own configuration. You will have to create at least one\n" -"regular user for yourself. That account is where you should log in for\n" -"routine use. Although it is very practical to log in as \"root\" everyday,\n" -"it may also be very dangerous! The slightest mistake could mean that your\n" -"system would not work any more. If you make a serious mistake as a regular\n" -"user, you may only lose some information, but not the entire system.\n" -"\n" -"First, you have to enter your real name. This is not mandatory, of course -\n" -"as you can actually enter whatever you want. DrakX will then take the first\n" -"word you have entered in the box and will bring it over to the \"User\n" -"name\". This is the name this particular user will use to log into the\n" -"system. You can change it. You then have to enter a password here. A\n" -"non-privileged (regular) user's password is not as crucial as that of\n" -"\"root\" from a security point of view, but that is no reason to neglect it\n" -"- after all, your files are at risk.\n" -"\n" -"If you click on \"Accept user\", you can then add as many as you want. Add\n" -"a user for each one of your friends: your father or your sister, for\n" -"example. When you finish adding all the users you want, select \"Done\".\n" -"\n" -"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" -"for that user (bash by default)." -msgstr "" -"GNU/Linux is a multiuser system, and this means that each user can have his\n" -"own preferences, his own files and so on. You can read the ``User Guide''\n" -"to learn more. But unlike \"root\", which is the administrator, the users\n" -"you will add here will not be entitled to change anything except their own\n" -"files and their own configuration. You will have to create at least one\n" -"regular user for yourself. That account is where you should log in for\n" -"routine use. Although it is very practical to log in as \"root\" everyday,\n" -"it may also be very dangerous! The slightest mistake could mean that your\n" -"system would not work any more. If you make a serious mistake as a regular\n" -"user, you may only lose some information, but not the entire system.\n" -"\n" -"First, you have to enter your real name. This is not mandatory, of course -\n" -"as you can actually enter whatever you want. DrakX will then take the first\n" -"word you have entered in the box and will bring it over to the \"User\n" -"name\". This is the name this particular user will use to log into the\n" -"system. You can change it. You then have to enter a password here. A\n" -"non-privileged (regular) user's password is not as crucial as that of\n" -"\"root\" from a security point of view, but that is no reason to neglect it\n" -"- after all, your files are at risk.\n" -"\n" -"If you click on \"Accept user\", you can then add as many as you want. Add\n" -"a user for each one of your friends: your father or your sister, for\n" -"example. When you finish adding all the users you want, select \"Done\".\n" -"\n" -"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" -"for that user (bash by default)." - -#: ../../help.pm_.c:41 -msgid "" -"Listed above are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, they are good for most common\n" -"installs. If you make any changes, you must at least define a root\n" -"partition (\"/\"). Do not choose too small a partition or you will not be\n" -"able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a partition for \"/home\"\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" -"Listed above are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, they are good for most common\n" -"installs. If you make any changes, you must at least define a root\n" -"partition (\"/\"). Do not choose too small a partition or you will not be\n" -"able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a partition for \"/home\"\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." - -#: ../../help.pm_.c:72 -msgid "" -"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n" -"knows if a selected package is located on another CDROM and will eject the\n" -"current CD and ask you to insert a different one as required." -msgstr "" -"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n" -"knows if a selected package is located on another CDROM and will eject the\n" -"current CD and ask you to insert a different one as required." - -#: ../../help.pm_.c:77 -msgid "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"you are not supposed to know them all by heart.\n" -"\n" -"If you are performing a standard installation from CDROM, you will first be\n" -"asked to specify the CDs you currently have (in Expert mode only). Check\n" -"the CD labels and highlight the boxes corresponding to the CDs you have\n" -"available for installation. Click \"OK\" when you are ready to continue.\n" -"\n" -"Packages are sorted in groups corresponding to a particular use of your\n" -"machine. The groups themselves are sorted into four sections:\n" -"\n" -" * \"Workstation\": if you plan to use your machine as a workstation, " -"select\n" -"one or more of the corresponding groups.\n" -"\n" -" * \"Development\": if the machine is to be used for programming, choose " -"the\n" -"desired group(s).\n" -"\n" -" * \"Server\": finally, if the machine is intended to be a server, you will\n" -"be able to select which of the most common services you wish to see\n" -"installed on the machine.\n" -"\n" -" * \"Graphical Environment\": this is where you will choose your preferred\n" -"graphical environment. At least one must be selected if you want to have a\n" -"graphical workstation!\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group.\n" -"\n" -"You can check the \"Individual package selection\" box, which is useful if\n" -"you are familiar with the packages being offered or if you want to have\n" -"total control over what will be installed.\n" -"\n" -"If you started the installation in \"Update\" mode, you can unselect all\n" -"groups to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." -msgstr "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"you are not supposed to know them all by heart.\n" -"\n" -"If you are performing a standard installation from CDROM, you will first be\n" -"asked to specify the CDs you currently have (in Expert mode only). Check\n" -"the CD labels and highlight the boxes corresponding to the CDs you have\n" -"available for installation. Click \"OK\" when you are ready to continue.\n" -"\n" -"Packages are sorted in groups corresponding to a particular use of your\n" -"machine. The groups themselves are sorted into four sections:\n" -"\n" -" * \"Workstation\": if you plan to use your machine as a workstation, " -"select\n" -"one or more of the corresponding groups.\n" -"\n" -" * \"Development\": if the machine is to be used for programming, choose " -"the\n" -"desired group(s).\n" -"\n" -" * \"Server\": finally, if the machine is intended to be a server, you will\n" -"be able to select which of the most common services you wish to see\n" -"installed on the machine.\n" -"\n" -" * \"Graphical Environment\": this is where you will choose your preferred\n" -"graphical environment. At least one must be selected if you want to have a\n" -"graphical workstation!\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group.\n" -"\n" -"You can check the \"Individual package selection\" box, which is useful if\n" -"you are familiar with the packages being offered or if you want to have\n" -"total control over what will be installed.\n" -"\n" -"If you started the installation in \"Update\" mode, you can unselect all\n" -"groups to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." - -#: ../../help.pm_.c:115 -msgid "" -"Finally, depending on your choice of whether or not to select individual\n" -"packages, you will be presented a tree containing all packages classified\n" -"by groups and subgroups. While browsing the tree, you can select entire\n" -"groups, subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right. When your selection is finished, click the \"Install\" button which\n" -"will then launch the installation process. Depending on the speed of your\n" -"hardware and the number of packages that need to be installed, it may take\n" -"a while to complete the process. A time to complete estimate is displayed\n" -"on the screen to help you gauge if there is sufficient time to enjoy a cup\n" -"of coffee.\n" -"\n" -"!! If a server package has been selected either intentionally or because it\n" -"was part of a whole group, you will be asked to confirm that you really\n" -"want those servers to be installed. Under Mandrake Linux, any installed\n" -"servers are started by default at boot time. Even if they are safe and have\n" -"no known issues at the time the distribution was shipped, it may happen\n" -"that security holes are discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" -"install the listed services and they will be started automatically by\n" -"default. !!\n" -"\n" -"The \"Automatic dependencies\" option simply disables the warning dialog\n" -"which appears whenever the installer automatically selects a package. This\n" -"occurs because it has determined that it needs to satisfy a dependency with\n" -"another package in order to successfully complete the installation.\n" -"\n" -"The tiny floppy disc icon at the bottom of the list allows to load the\n" -"packages list chosen during a previous installation. Clicking on this icon\n" -"will ask you to insert a floppy disk previously created at the end of\n" -"another installation. See the second tip of last step on how to create such\n" -"a floppy." -msgstr "" -"Finally, depending on your choice of whether or not to select individual\n" -"packages, you will be presented a tree containing all packages classified\n" -"by groups and subgroups. While browsing the tree, you can select entire\n" -"groups, subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right. When your selection is finished, click the \"Install\" button which\n" -"will then launch the installation process. Depending on the speed of your\n" -"hardware and the number of packages that need to be installed, it may take\n" -"a while to complete the process. A time to complete estimate is displayed\n" -"on the screen to help you gauge if there is sufficient time to enjoy a cup\n" -"of coffee.\n" -"\n" -"!! If a server package has been selected either intentionally or because it\n" -"was part of a whole group, you will be asked to confirm that you really\n" -"want those servers to be installed. Under Mandrake Linux, any installed\n" -"servers are started by default at boot time. Even if they are safe and have\n" -"no known issues at the time the distribution was shipped, it may happen\n" -"that security holes are discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" -"install the listed services and they will be started automatically by\n" -"default. !!\n" -"\n" -"The \"Automatic dependencies\" option simply disables the warning dialog\n" -"which appears whenever the installer automatically selects a package. This\n" -"occurs because it has determined that it needs to satisfy a dependency with\n" -"another package in order to successfully complete the installation.\n" -"\n" -"The tiny floppy disc icon at the bottom of the list allows to load the\n" -"packages list chosen during a previous installation. Clicking on this icon\n" -"will ask you to insert a floppy disk previously created at the end of\n" -"another installation. See the second tip of last step on how to create such\n" -"a floppy." - -#: ../../help.pm_.c:151 -msgid "" -"If you wish to connect your computer to the Internet or to a local network,\n" -"please choose the correct option. Please turn on your device before\n" -"choosing the correct option to let DrakX detect it automatically.\n" -"\n" -"Mandrake Linux proposes the configuration of an Internet connection at\n" -"installation time. Available connections are: traditional modem, ISDN\n" -"modem, ADSL connection, cable modem, and finally a simple LAN connection\n" -"(Ethernet).\n" -"\n" -"Here, we will not detail each configuration. Simply make sure that you have\n" -"all the parameters from your Internet Service Provider or system\n" -"administrator.\n" -"\n" -"You can consult the manual chapter about Internet connections for details\n" -"about the configuration, or simply wait until your system is installed and\n" -"use the program described there to configure your connection.\n" -"\n" -"If you wish to configure the network later after installation or if you\n" -"have finished configuring your network connection, click \"Cancel\"." -msgstr "" -"If you wish to connect your computer to the Internet or to a local network,\n" -"please choose the correct option. Please turn on your device before\n" -"choosing the correct option to let DrakX detect it automatically.\n" -"\n" -"Mandrake Linux proposes the configuration of an Internet connection at\n" -"installation time. Available connections are: traditional modem, ISDN\n" -"modem, ADSL connection, cable modem, and finally a simple LAN connection\n" -"(Ethernet).\n" -"\n" -"Here, we will not detail each configuration. Simply make sure that you have\n" -"all the parameters from your Internet Service Provider or system\n" -"administrator.\n" -"\n" -"You can consult the manual chapter about Internet connections for details\n" -"about the configuration, or simply wait until your system is installed and\n" -"use the program described there to configure your connection.\n" -"\n" -"If you wish to configure the network later after installation or if you\n" -"have finished configuring your network connection, click \"Cancel\"." - -#: ../../help.pm_.c:172 -msgid "" -"You may now choose which services you wish to start at boot time.\n" -"\n" -"Here are presented all the services available with the current\n" -"installation. Review them carefully and uncheck those which are not always\n" -"needed at boot time.\n" -"\n" -"You can get a short explanatory text about a service by selecting a\n" -"specific service. However, if you are not sure whether a service is useful\n" -"or not, it is safer to leave the default behavior.\n" -"\n" -"At this stage, be very careful if you intend to use your machine as a\n" -"server: you will probably not want to start any services that you do not\n" -"need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need." -msgstr "" -"Sada možete izabrati koje servise želite pokretati prilikom boota.\n" -"\n" -"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n" -"instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu " -"potrebni\n" -"prilikom boota.\n" -"\n" -"Držanjem kursora miša na nazivu servisa možete dobiti kratki tekst\n" -"objašnjenja. Ako niste sigurni da li je servis koristan ili ne, sigurnije " -"je\n" -"da ne mijenjate predloženi izbor.\n" -"\n" -"Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vašu mašinu\n" -"kao server: vjerovatno ne želite da pokrenete neke servise koji vam ne\n" -"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n" -"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n" -"stvarno trebaju." - -#: ../../help.pm_.c:188 -msgid "" -"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n" -"local time according to the time zone you selected." -msgstr "" -"GNU/Linux računa vrijeme u GMT (srednje grinvičko vrijeme) i prevodi ga\n" -"u lokalno vrijeme ovisno o vremenskoj zoni koju ste izabrali." - -#: ../../help.pm_.c:192 -msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphics environments (KDE, Gnome, AfterStep,\n" -"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n" -"will try to configure X automatically.\n" -"\n" -"It is extremely rare for it to fail, unless the hardware is very old (or\n" -"very new). If it succeeds, it will start X automatically with the best\n" -"resolution possible depending on the size of the monitor. A window will\n" -"then appear and ask you if you can see it.\n" -"\n" -"If you are doing an \"Expert\" install, you will enter the X configuration\n" -"wizard. See the corresponding section of the manual for more information\n" -"about this wizard.\n" -"\n" -"If you can see the message and answer \"Yes\", then DrakX will proceed to\n" -"the next step. If you cannot see the message, it simply means that the\n" -"configuration was wrong and the test will automatically end after 10\n" -"seconds, restoring the screen." -msgstr "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphics environments (KDE, Gnome, AfterStep,\n" -"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n" -"will try to configure X automatically.\n" -"\n" -"It is extremely rare for it to fail, unless the hardware is very old (or\n" -"very new). If it succeeds, it will start X automatically with the best\n" -"resolution possible depending on the size of the monitor. A window will\n" -"then appear and ask you if you can see it.\n" -"\n" -"If you are doing an \"Expert\" install, you will enter the X configuration\n" -"wizard. See the corresponding section of the manual for more information\n" -"about this wizard.\n" -"\n" -"If you can see the message and answer \"Yes\", then DrakX will proceed to\n" -"the next step. If you cannot see the message, it simply means that the\n" -"configuration was wrong and the test will automatically end after 10\n" -"seconds, restoring the screen." - -#: ../../help.pm_.c:212 -msgid "" -"The first time you try the X configuration, you may not be very satisfied\n" -"with its display (screen is too small, shifted left or right...). Hence,\n" -"even if X starts up correctly, DrakX then asks you if the configuration\n" -"suits you. It will also propose to change it by displaying a list of valid\n" -"modes it could find, asking you to select one.\n" -"\n" -"As a last resort, if you still cannot get X to work, choose \"Change\n" -"graphics card\", select \"Unlisted card\", and when prompted on which\n" -"server you want, choose \"FBDev\". This is a failsafe option which works\n" -"with any modern graphics card. Then choose \"Test again\" to be sure." -msgstr "" -"The first time you try the X configuration, you may not be very satisfied\n" -"with its display (screen is too small, shifted left or right...). Hence,\n" -"even if X starts up correctly, DrakX then asks you if the configuration\n" -"suits you. It will also propose to change it by displaying a list of valid\n" -"modes it could find, asking you to select one.\n" -"\n" -"As a last resort, if you still cannot get X to work, choose \"Change\n" -"graphics card\", select \"Unlisted card\", and when prompted on which\n" -"server you want, choose \"FBDev\". This is a failsafe option which works\n" -"with any modern graphics card. Then choose \"Test again\" to be sure." - -#: ../../help.pm_.c:224 -msgid "" -"Finally, you will be asked whether you want to see the graphical interface\n" -"at boot. Note this question will be asked even if you chose not to test the\n" -"configuration. Obviously, you want to answer \"No\" if your machine is to\n" -"act as a server, or if you were not successful in getting the display\n" -"configured." -msgstr "" -"Finally, you will be asked whether you want to see the graphical interface\n" -"at boot. Note this question will be asked even if you chose not to test the\n" -"configuration. Obviously, you want to answer \"No\" if your machine is to\n" -"act as a server, or if you were not successful in getting the display\n" -"configured." - -#: ../../help.pm_.c:231 -msgid "" -"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" -"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n" -"the prompt. But in case your computer cannot boot from the CDROM, you\n" -"should come back to this step for help in at least two situations:\n" -"\n" -" * when installing the boot loader, DrakX will rewrite the boot sector " -"(MBR)\n" -"of your main disk (unless you are using another boot manager) so that you\n" -"can start up with either Windows or GNU/Linux (assuming you have Windows in\n" -"your system). If you need to reinstall Windows, the Microsoft install\n" -"process will rewrite the boot sector, and then you will not be able to\n" -"start GNU/Linux!\n" -"\n" -" * if a problem arises and you cannot start up GNU/Linux from the hard " -"disk,\n" -"this floppy disk will be the only means of starting up GNU/Linux. It\n" -"contains a fair number of system tools for restoring a system, which has\n" -"crashed due to a power failure, an unfortunate typing error, a typo in a\n" -"password, or any other reason.\n" -"\n" -"When you click on this step, you will be asked to enter a disk inside the\n" -"drive. The floppy disk you will insert must be empty or contain data which\n" -"you do not need. You will not have to format it since DrakX will rewrite\n" -"the whole disk." -msgstr "" -"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" -"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n" -"the prompt. But in case your computer cannot boot from the CDROM, you\n" -"should come back to this step for help in at least two situations:\n" -"\n" -" * when installing the boot loader, DrakX will rewrite the boot sector " -"(MBR)\n" -"of your main disk (unless you are using another boot manager) so that you\n" -"can start up with either Windows or GNU/Linux (assuming you have Windows in\n" -"your system). If you need to reinstall Windows, the Microsoft install\n" -"process will rewrite the boot sector, and then you will not be able to\n" -"start GNU/Linux!\n" -"\n" -" * if a problem arises and you cannot start up GNU/Linux from the hard " -"disk,\n" -"this floppy disk will be the only means of starting up GNU/Linux. It\n" -"contains a fair number of system tools for restoring a system, which has\n" -"crashed due to a power failure, an unfortunate typing error, a typo in a\n" -"password, or any other reason.\n" -"\n" -"When you click on this step, you will be asked to enter a disk inside the\n" -"drive. The floppy disk you will insert must be empty or contain data which\n" -"you do not need. You will not have to format it since DrakX will rewrite\n" -"the whole disk." - -#: ../../help.pm_.c:255 -msgid "" -"At this point you need to choose where on your hard drive to install your\n" -"Mandrake Linux operating system. If your hard drive is empty or if an\n" -"existing operating system is using all the space available, you will need\n" -"to partition it. Basically, partitioning a hard drive consists of logically\n" -"dividing it to create space to install your new Mandrake Linux system.\n" -"\n" -"Because the effects of the partitioning process are usually irreversible,\n" -"partitioning can be intimidating and stressful if you are an inexperienced\n" -"user. Fortunately, there is a wizard which simplifies this process. Before\n" -"beginning, please consult the manual and take your time.\n" -"\n" -"If you are running the install in Expert mode, you will enter DiskDrake,\n" -"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n" -"partitions. See the DiskDrake chapter of the manual. From the installation\n" -"interface, you can use the wizards as described here by clicking the\n" -"\"Wizard\" button of the dialog.\n" -"\n" -"If partitions have already been defined, either from a previous\n" -"installation or from another partitioning tool, simply select those to\n" -"install your Linux system.\n" -"\n" -"If partitions are not defined, you will need to create them using the\n" -"wizard. Depending on your hard drive configuration, several options are\n" -"available:\n" -"\n" -" * \"Use free space\": this option will simply lead to an automatic\n" -"partitioning of your blank drive(s). You will not be prompted further.\n" -"\n" -" * \"Use existing partition\": the wizard has detected one or more existing\n" -"Linux partitions on your hard drive. If you want to use them, choose this\n" -"option.\n" -"\n" -" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" -"installed on your hard drive and takes all the space available on it, you\n" -"have to create free space for Linux data. To do that, you can delete your\n" -"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n" -"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n" -"be performed without the loss of any data. This solution is recommended if\n" -"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n" -"\n" -" Before choosing this option, please understand that after this " -"procedure,\n" -"the size of your Microsoft Windows partition will be smaller than at the\n" -"present time. You will have less free space under Microsoft Windows to\n" -"store your data or to install new software.\n" -"\n" -" * \"Erase entire disk\": if you want to delete all data and all partitions\n" -"present on your hard drive and replace them with your new Mandrake Linux\n" -"system, choose this option. Be careful with this solution because you will\n" -"not be able to revert your choice after confirmation.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"Remove Windows\": this will simply erase everything on the drive and\n" -"begin fresh, partitioning everything from scratch. All data on your disk\n" -"will be lost.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"Expert mode\": choose this option if you want to manually partition\n" -"your hard drive. Be careful - it is a powerful but dangerous choice. You\n" -"can very easily lose all your data. Hence, do not choose this unless you\n" -"know what you are doing." -msgstr "" -"Na ovom mjestu trebate izabrati gdje želite instalirati Linux Mandrake\n" -"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n" -"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n" -"particionirate. U biti, particioniranje hard diska predstavlja logičko\n" -"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n" -"Mandrake Linux sistema.\n" -"\n" -"Pošto su efekti particioniranja obično nepovratni, particioniranje može\n" -"biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji\n" -"čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molimo\n" -"konsultirajte priručnik i nemojte žuriti.\n" -"\n" -"Ako instalirate koristeći Ekspertni mod, ući ćete u DiskDrake, Mandrake\n" -"Linux alat za particioniranje, koji vam omogućava da fino podesite vaše\n" -"particije. Pogledajte priručnik, poglavlje o DiskDrake-u. Na instalacionom\n" -"sučelju možete koristiti čarobnjake kao što je opisano tamo, klikajući na\n" -"dugme Čarobnjak.\n" -"\n" -"Ako su particije već definirane (tokom neke ranije instalacije ili pomoću\n" -"nekog drugog alata za particioniranje), sve što trebate jeste da ih " -"izaberete\n" -"za instalaciju vašeg Linux sistema.\n" -"\n" -"Ako particije nisu već definirane, trebate ih kreirati koristeći čarobnjak.\n" -"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n" -"mogućnosti:\n" -"\n" -" * Koristi slobodan prostor: jednostavno vodi na automatsko particioniranje\n" -"vašeg praznog diska (diskova). Neće biti postavljana nikakva daljnja " -"pitanja.\n" -"\n" -" * Koristi postojeću particiju: čarobnjak je detektovao jednu ili više " -"postojećih\n" -"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n" -"opciju.\n" -"\n" -" * Koristi slobodan prostor na Windows particiji: ako je na vašem hard\n" -"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n" -"moraćete napraviti nešto slobodnog prostora za Linux. To možete učiniti\n" -"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opcije\n" -"\"Pobriši čitav disk\" ili \"Expertni mod\") ili možete promjeniti veličinu " -"vaše\n" -"Microsoft Windows particije. Promjena veličine se može izvršiti bez gubitka\n" -"podataka. Ova mogućnost je preporučena ako namjeravate koristiti i Linux\n" -"Mandrake i Microsoft Windows na istom računaru.\n" -"\n" -" Prije izbora ove opcije, molimo da imate na umu da će veličina vaše\n" -"Microsoft Windows particije biti manja nego trenutno. To znači da će " -"Microsoft\n" -"Windows prijavljivati da imate manje prostora za smještaj podataka ili " -"instaliranje\n" -"novog softwarea.\n" -"\n" -" * Pobriši čitav disk: ako želite da obrišete sve podatke i sve particije\n" -"koje su prisutne na vašem hard disku i umjesto njih postavite vaš novi " -"Linux\n" -"Mandrake sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n" -"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n" -"\n" -" !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti " -"izgubljeni. !!\n" -"\n" -" * Ukloni Windows: ovo će jednostavno pobrisati sve na disku i početi od\n" -"početka, particionirajući ga. Svi podatci na vašem disku će biti " -"izgubljeni.\n" -"\n" -" !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti " -"izgubljeni. !!\n" -"\n" -" * Ekspertni mod: ako želite da ručno particionirate vaš hard disk, " -"izaberite ovu\n" -"opciju. Budite oprezni - to je moćan, ali i opasan izbor. Vrlo lako možete\n" -"izgubiti sve vaše podatke. Zato nemojte birati ovu opciju sem ako ste " -"sigurni\n" -"šta radite." - -#: ../../help.pm_.c:319 -msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"OK\" to reboot the system. You can start\n" -"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" -"soon as the computer has booted up again.\n" -"\n" -"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" -"\n" -" * \"generate auto-install floppy\": to create an installation floppy disk\n" -"which will automatically perform a whole installation without the help of\n" -"an operator, similar to the installation you just configured.\n" -"\n" -" Note that two different options are available after clicking the button:\n" -"\n" -" * \"Replay\". This is a partially automated install as the partitioning\n" -"step (and only this one) remains interactive.\n" -"\n" -" * \"Automated\". Fully automated install: the hard disk is completely\n" -"rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing a great number of similar\n" -"machines. See the Auto install section at our web site.\n" -"\n" -" * \"Save packages selection\"(*): saves the packages selection as made\n" -"previously. Then, when doing another installation, insert the floppy inside\n" -"the driver and run the installation going to the help screen by pressing on\n" -"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" -"\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" -msgstr "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"OK\" to reboot the system. You can start\n" -"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" -"soon as the computer has booted up again.\n" -"\n" -"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" -"\n" -" * \"generate auto-install floppy\": to create an installation floppy disk\n" -"which will automatically perform a whole installation without the help of\n" -"an operator, similar to the installation you just configured.\n" -"\n" -" Note that two different options are available after clicking the button:\n" -"\n" -" * \"Replay\". This is a partially automated install as the partitioning\n" -"step (and only this one) remains interactive.\n" -"\n" -" * \"Automated\". Fully automated install: the hard disk is completely\n" -"rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing a great number of similar\n" -"machines. See the Auto install section at our web site.\n" -"\n" -" * \"Save packages selection\"(*): saves the packages selection as made\n" -"previously. Then, when doing another installation, insert the floppy inside\n" -"the driver and run the installation going to the help screen by pressing on\n" -"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" -"\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" - -#: ../../help.pm_.c:350 -msgid "" -"Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a file system).\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to\n" -"erase any data they contain. If you wish to do that, please select those\n" -"partitions as well.\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" -"reformat partitions containing data that you wish to keep (typically\n" -"\"/home\").\n" -"\n" -"Please be careful when selecting partitions. After formatting, all data on\n" -"the selected partitions will be deleted and you will not be able to recover\n" -"any of them.\n" -"\n" -"Click on \"OK\" when you are ready to format partitions.\n" -"\n" -"Click on \"Cancel\" if you want to choose another partition for your new\n" -"Mandrake Linux operating system installation.\n" -"\n" -"Click on \"Advanced\" if you wish to select partitions that will be checked\n" -"for bad blocks on the disc." -msgstr "" -"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n" -"mogle koristiti (formatiranje znači kreiranje datotečnog sistema). \n" -"\n" -"U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće\n" -"particije kako biste pobrisali podatke koje sadrže. Ako želite to učiniti, " -"molim\n" -"takođe izaberite te particije koje želite da formatirate.\n" -"\n" -"Molim obratite pažnju da nije neophodno formatirati sve postojeće " -"particije.\n" -"Morate reformatirati particije koje sadrže operativni sistem (kao što su\n" -"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje " -"sadrže\n" -"podatke koje želite zadržati (tipično /home).\n" -"\n" -"Molimo da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n" -"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n" -"povratite.\n" -"\n" -"Kliknite na OK kada budete spremni za formatiranje particija.\n" -"\n" -"Kliknite na Odustani ako želite da izaberete druge particije za instalaciju\n" -"vašeg novog Linux-Mandrake operativnog sistema.\n" -"\n" -"Kliknite na Napredno da izaberete particije koje želite provjeriti radi\n" -"loših blokova." - -#: ../../help.pm_.c:376 -msgid "" -"Your new Mandrake Linux operating system is currently being installed.\n" -"Depending on the number of packages you will be installing and the speed of\n" -"your computer, this operation could take from a few minutes to a\n" -"significant amount of time.\n" -"\n" -"Please be patient." -msgstr "" -"Vaš novi Linux-Mandrake operativni sistem se trenutno intalira. Ovisno o\n" -"broju paketa koje želite instalirati i brzini vašeg računara, ova operacija\n" -"bi mogla trajati nekoliko minuta ali i značajno duže.\n" -"\n" -"Molim da imate strpljenja." - -#: ../../help.pm_.c:384 -msgid "" -"Before continuing you should read carefully the terms of the license. It\n" -"covers the whole Mandrake Linux distribution, and if you do not agree with\n" -"all the terms in it, click on the \"Refuse\" button which will immediately\n" -"terminate the installation. To continue with the installation, click the\n" -"\"Accept\" button." -msgstr "" -"Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona\n" -"pokriva cijelu Mandrake Linux distribuciju, pa ako se ne slažete sa svim\n" -"uvjetima u njoj, kliknite na dugme Odbij, što će automatski završiti " -"instalaciju.\n" -"Da biste nastavili sa instalacijom, kliknite na dugme Prihvati." - -#: ../../help.pm_.c:391 -msgid "" -"At this point, it is time to choose the security level desired for the\n" -"machine. As a rule of thumb, the more exposed the machine is, and the more\n" -"the data stored in it is crucial, the higher the security level should be.\n" -"However, a higher security level is generally obtained at the expenses of\n" -"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n" -"get more information about the meaning of these levels.\n" -"\n" -"If you do not know what to choose, keep the default option." -msgstr "" -"At this point, it is time to choose the security level desired for the\n" -"machine. As a rule of thumb, the more exposed the machine is, and the more\n" -"the data stored in it is crucial, the higher the security level should be.\n" -"However, a higher security level is generally obtained at the expenses of\n" -"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n" -"get more information about the meaning of these levels.\n" -"\n" -"If you do not know what to choose, keep the default option." - -#: ../../help.pm_.c:401 -msgid "" -"At this point, you need to choose what partition(s) will be used for the\n" -"installation of your Mandrake Linux system. If partitions have been already\n" -"defined, either from a previous installation of GNU/Linux or from another\n" -"partitioning tool, you can use existing partitions. Otherwise hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n" -"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"Clear all\": this option deletes all partitions on the selected hard\n" -"drive.\n" -"\n" -" * \"Auto allocate\": this option allows you to automatically create Ext2\n" -"and swap partitions in free space of your hard drive.\n" -"\n" -" * \"Rescue partition table\": if your partition table is damaged, you can\n" -"try to recover it using this option. Please be careful and remember that it\n" -"can fail.\n" -"\n" -" * \"Undo\": use this option to cancel your changes.\n" -"\n" -" * \"Reload\": you can use this option if you wish to undo all changes and\n" -"load your initial partitions table.\n" -"\n" -" * \"Wizard\": use this option if you wish to use a wizard to partition " -"your\n" -"hard drive. This is recommended if you do not have a good knowledge of\n" -"partitioning.\n" -"\n" -" * \"Restore from floppy\": this option will allow you to restore a\n" -"previously saved partition table from floppy disk.\n" -"\n" -" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n" -"later partition-table recovery if necessary. It is strongly recommended to\n" -"perform this step.\n" -"\n" -" * \"Done\": when you have finished partitioning your hard drive, this will\n" -"save your changes back to disc.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected);\n" -"\n" -" * Ctrl-d to delete a partition;\n" -"\n" -" * Ctrl-m to set the mount point.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n" -"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." -msgstr "" -"At this point, you need to choose what partition(s) will be used for the\n" -"installation of your Mandrake Linux system. If partitions have been already\n" -"defined, either from a previous installation of GNU/Linux or from another\n" -"partitioning tool, you can use existing partitions. Otherwise hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n" -"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"Clear all\": this option deletes all partitions on the selected hard\n" -"drive.\n" -"\n" -" * \"Auto allocate\": this option allows you to automatically create Ext2\n" -"and swap partitions in free space of your hard drive.\n" -"\n" -" * \"Rescue partition table\": if your partition table is damaged, you can\n" -"try to recover it using this option. Please be careful and remember that it\n" -"can fail.\n" -"\n" -" * \"Undo\": use this option to cancel your changes.\n" -"\n" -" * \"Reload\": you can use this option if you wish to undo all changes and\n" -"load your initial partitions table.\n" -"\n" -" * \"Wizard\": use this option if you wish to use a wizard to partition " -"your\n" -"hard drive. This is recommended if you do not have a good knowledge of\n" -"partitioning.\n" -"\n" -" * \"Restore from floppy\": this option will allow you to restore a\n" -"previously saved partition table from floppy disk.\n" -"\n" -" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n" -"later partition-table recovery if necessary. It is strongly recommended to\n" -"perform this step.\n" -"\n" -" * \"Done\": when you have finished partitioning your hard drive, this will\n" -"save your changes back to disc.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected);\n" -"\n" -" * Ctrl-d to delete a partition;\n" -"\n" -" * Ctrl-m to set the mount point.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n" -"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." - -#: ../../help.pm_.c:460 -msgid "" -"More than one Microsoft Windows partition has been detected on your hard\n" -"drive. Please choose the one you want resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." -msgstr "" -"More than one Microsoft Windows partition has been detected on your hard\n" -"drive. Please choose the one you want resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\",\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\",\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\",\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." - -#: ../../help.pm_.c:491 -msgid "Please be patient. This operation can take several minutes." -msgstr "" -"Molimo da imate strpljenja. Ova operacija može potrajati nekoliko minuta." - -#: ../../help.pm_.c:494 -msgid "" -"DrakX now needs to know if you want to perform a default (\"Recommended\")\n" -"installation or if you want to have greater control (\"Expert\"). You also\n" -"have the choice of performing a new install or an upgrade of an existing\n" -"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n" -"old system. Select \"Upgrade\" if you are upgrading or repairing an\n" -"existing system.\n" -"\n" -"Please choose \"Install\" if there are no previous version of Mandrake\n" -"Linux installed or if you wish to boot between various operating systems.\n" -"\n" -"Please choose \"Update\" if you wish to update or repair an already\n" -"installed version of Mandrake Linux.\n" -"\n" -"Depending on your knowledge of GNU/Linux, please choose one of the\n" -"following to install or update your Mandrake Linux operating system:\n" -"\n" -" * Recommended: choose this if you have never installed a GNU/Linux\n" -"operating system. The installation will be very easy and you will only be\n" -"asked a few questions.\n" -"\n" -" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" -"installation class. The expert installation will allow you to perform a\n" -"highly customized installation. Answering some of the questions can be\n" -"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n" -"this unless you know what you are doing." -msgstr "" -"DrakX sada mora znati da li želite obaviti podrazumjevanu instalaciju\n" -"(\"Preporučeno\") ili želite da imate veću kontrolu (\"Ekspert\"). Takođe\n" -"imate izbor između instalacije novog ili unaprijeđenja postojećeg\n" -"Mandrake Linux sistema. Klikom na \"Instaliraj\" ćete potpuno obrisati\n" -"stari sistem. Izaberite \"Update\" ako unaprijeđujete ili popravljate\n" -"postojeći sistem.\n" -"\n" -"Molimo izaberite \"Instaliraj\" ako nemate instaliranu neku raniju verziju\n" -"Mandrake Linuxa ili ako želite bootati nekoliko operativnih sistema\n" -"istovremeno.\n" -"\n" -"Molimo izaberite \"Update\" ako želite da updatujete ili popravite već\n" -"instaliranu verziju Mandrake Linuxa.\n" -"\n" -"Ovisno o vašem poznavnaju GNU/Linuxa, molim izaberite jedan od sljedećih\n" -"nivoa za instalaciju ili update vašeg Mandrake Linux operativnog sistema:\n" -"\n" -" * Preporučeno: ako nikada niste instalirali GNU/Linux operativni sistem,\n" -"izaberite ovo. Instalacija će biti veoma jednostavna i biće vam postavljeno\n" -"svega par pitanja.\n" -"\n" -" * Ekspert: ako imate dobro znanje GNU/Linuxa, možete odabrati ovu klasu\n" -"instalacije. Ekspertna instalacija vam omogućuje da obavite visoko " -"prilagođenu\n" -"instalaciju. Odgovor na neka pitanja može biti vrlo težak ako nemate dobro\n" -"poznavanje GNU/Linuxa, zato nemojte birati ovo sem ako znate šta radite." - -#: ../../help.pm_.c:521 -msgid "" -"Normally, DrakX selects the right keyboard for you (depending on the\n" -"language you have chosen) and you will not even see this step. However, you\n" -"might not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may still want\n" -"your keyboard to be a Swiss keyboard. Or if you speak English but are\n" -"located in Quebec, you may find yourself in the same situation. In both\n" -"cases, you will have to go back to this installation step and select an\n" -"appropriate keyboard from the list.\n" -"\n" -"Click on the \"More\" button to be presented with the complete list of\n" -"supported keyboards." -msgstr "" -"Normally, DrakX selects the right keyboard for you (depending on the\n" -"language you have chosen) and you will not even see this step. However, you\n" -"might not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may still want\n" -"your keyboard to be a Swiss keyboard. Or if you speak English but are\n" -"located in Quebec, you may find yourself in the same situation. In both\n" -"cases, you will have to go back to this installation step and select an\n" -"appropriate keyboard from the list.\n" -"\n" -"Click on the \"More\" button to be presented with the complete list of\n" -"supported keyboards." - -#: ../../help.pm_.c:534 -msgid "" -"Please choose your preferred language for installation and system usage.\n" -"\n" -"Clicking on the \"Advanced\" button will allow you to select other\n" -"languages to be installed on your workstation. Selecting other languages\n" -"will install the language-specific files for system documentation and\n" -"applications. For example, if you will host users from Spain on your\n" -"machine, select English as the main language in the tree view and in the\n" -"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n" -"\n" -"Note that multiple languages may be installed. Once you have selected any\n" -"additional locales click the \"OK\" button to continue." -msgstr "" -"Please choose your preferred language for installation and system usage.\n" -"\n" -"Clicking on the \"Advanced\" button will allow you to select other\n" -"languages to be installed on your workstation. Selecting other languages\n" -"will install the language-specific files for system documentation and\n" -"applications. For example, if you will host users from Spain on your\n" -"machine, select English as the main language in the tree view and in the\n" -"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n" -"\n" -"Note that multiple languages may be installed. Once you have selected any\n" -"additional locales click the \"OK\" button to continue." - -#: ../../help.pm_.c:547 -msgid "" -"By default, DrakX assumes you have a two-button mouse and will set it up\n" -"for third-button emulation. DrakX will automatically know whether it is a\n" -"PS/2, serial or USB mouse.\n" -"\n" -"If you wish to specify a different type of mouse select the appropriate\n" -"type from the list provided.\n" -"\n" -"If you choose a mouse other than the default you will be presented with a\n" -"mouse test screen. Use the buttons and wheel to verify that the settings\n" -"are good. If the mouse is not working correctly press the space bar or\n" -"RETURN to \"Cancel\" and choose again." -msgstr "" -"By default, DrakX assumes you have a two-button mouse and will set it up\n" -"for third-button emulation. DrakX will automatically know whether it is a\n" -"PS/2, serial or USB mouse.\n" -"\n" -"If you wish to specify a different type of mouse select the appropriate\n" -"type from the list provided.\n" -"\n" -"If you choose a mouse other than the default you will be presented with a\n" -"mouse test screen. Use the buttons and wheel to verify that the settings\n" -"are good. If the mouse is not working correctly press the space bar or\n" -"RETURN to \"Cancel\" and choose again." - -#: ../../help.pm_.c:560 -msgid "" -"Please select the correct port. For example, the COM1 port under MS Windows\n" -"is named ttyS0 under GNU/Linux." -msgstr "" -"Molimo izaberite ispravan port. Na primjer, COM1 port pod MS Windowsom\n" -"se zove ttyS0 pod GNU/Linuxom." - -#: ../../help.pm_.c:564 -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"root\" is the system\n" -"administrator and is the only one authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if it is too easy. As you can see, you can\n" -"choose not to enter a password, but we strongly advise you against this if\n" -"only for one reason: do not think that because you booted GNU/Linux that\n" -"your other operating systems are safe from mistakes. Since \"root\" can\n" -"overcome all limitations and unintentionally erase all data on partitions\n" -"by carelessly accessing the partitions themselves, it is important for it\n" -"to be difficult to become \"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password - it makes it too\n" -"easy to compromise a system.\n" -"\n" -"However, please do not make the password too long or complicated because\n" -"you must be able to remember it without too much effort.\n" -"\n" -"The password will not be displayed on screen as you type it in. Hence, you\n" -"will have to type the password twice to reduce the chance of a typing\n" -"error. If you do happen to make the same typing error twice, this\n" -"\"incorrect\" password will have to be used the first time you connect.\n" -"\n" -"In expert mode, you will be asked if you will be connecting to an\n" -"authentication server, like NIS or LDAP.\n" -"\n" -"If your network uses LDAP (or NIS) protocol for authentication, select\n" -"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" -"network administrator.\n" -"\n" -"If your computer is not connected to any administrated network, you will\n" -"want to choose \"Local files\" for authentication." -msgstr "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"root\" is the system\n" -"administrator and is the only one authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if it is too easy. As you can see, you can\n" -"choose not to enter a password, but we strongly advise you against this if\n" -"only for one reason: do not think that because you booted GNU/Linux that\n" -"your other operating systems are safe from mistakes. Since \"root\" can\n" -"overcome all limitations and unintentionally erase all data on partitions\n" -"by carelessly accessing the partitions themselves, it is important for it\n" -"to be difficult to become \"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password - it makes it too\n" -"easy to compromise a system.\n" -"\n" -"However, please do not make the password too long or complicated because\n" -"you must be able to remember it without too much effort.\n" -"\n" -"The password will not be displayed on screen as you type it in. Hence, you\n" -"will have to type the password twice to reduce the chance of a typing\n" -"error. If you do happen to make the same typing error twice, this\n" -"\"incorrect\" password will have to be used the first time you connect.\n" -"\n" -"In expert mode, you will be asked if you will be connecting to an\n" -"authentication server, like NIS or LDAP.\n" -"\n" -"If your network uses LDAP (or NIS) protocol for authentication, select\n" -"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" -"network administrator.\n" -"\n" -"If your computer is not connected to any administrated network, you will\n" -"want to choose \"Local files\" for authentication." - -#: ../../help.pm_.c:600 -msgid "" -"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n" -"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n" -"accordingly, depending on what it finds here:\n" -"\n" -" * if Windows boot sector is found, it will replace it with a GRUB/LILO " -"boot\n" -"sector. Hence, you will be able to load either GNU/Linux or another OS;\n" -"\n" -" * if a GRUB or LILO boot sector is found, it will replace it with a new\n" -"one;\n" -"\n" -"If in doubt, DrakX will display a dialog with various options.\n" -"\n" -" * \"Boot loader to use\": you have three choices:\n" -"\n" -" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" -"interface.\n" -"\n" -" * \"GRUB\": if you prefer GRUB (text menu).\n" -"\n" -" * \"LILO with text menu\": if you prefer LILO with its text menu " -"interface.\n" -"\n" -" * \"Boot device\": in most cases, you will not change the default\n" -"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n" -"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n" -"\n" -" * \"Delay before booting the default image\": when rebooting the computer,\n" -"this is the delay granted to the user to choose - in the boot loader menu,\n" -"another boot entry than the default one.\n" -"\n" -"!! Beware that if you choose not to install a boot loader (by selecting\n" -"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" -"Linux system! Also be sure you know what you do before changing any of the\n" -"options. !!\n" -"\n" -"Clicking the \"Advanced\" button in this dialog will offer many advanced\n" -"options, which are reserved to the expert user.\n" -"\n" -"Mandrake Linux installs its own boot loader, which will let you boot either\n" -"GNU/Linux or any other operating systems which you have on your system.\n" -"\n" -"If there is another operating system installed on your machine, it will be\n" -"automatically added to the boot menu. Here, you can choose to fine-tune the\n" -"existing options. Double-clicking on an existing entry allows you to change\n" -"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n" -"on to the next installation step." -msgstr "" -"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n" -"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n" -"accordingly, depending on what it finds here:\n" -"\n" -" * if Windows boot sector is found, it will replace it with a GRUB/LILO " -"boot\n" -"sector. Hence, you will be able to load either GNU/Linux or another OS;\n" -"\n" -" * if a GRUB or LILO boot sector is found, it will replace it with a new\n" -"one;\n" -"\n" -"If in doubt, DrakX will display a dialog with various options.\n" -"\n" -" * \"Boot loader to use\": you have three choices:\n" -"\n" -" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" -"interface.\n" -"\n" -" * \"GRUB\": if you prefer GRUB (text menu).\n" -"\n" -" * \"LILO with text menu\": if you prefer LILO with its text menu " -"interface.\n" -"\n" -" * \"Boot device\": in most cases, you will not change the default\n" -"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n" -"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n" -"\n" -" * \"Delay before booting the default image\": when rebooting the computer,\n" -"this is the delay granted to the user to choose - in the boot loader menu,\n" -"another boot entry than the default one.\n" -"\n" -"!! Beware that if you choose not to install a boot loader (by selecting\n" -"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" -"Linux system! Also be sure you know what you do before changing any of the\n" -"options. !!\n" -"\n" -"Clicking the \"Advanced\" button in this dialog will offer many advanced\n" -"options, which are reserved to the expert user.\n" -"\n" -"Mandrake Linux installs its own boot loader, which will let you boot either\n" -"GNU/Linux or any other operating systems which you have on your system.\n" -"\n" -"If there is another operating system installed on your machine, it will be\n" -"automatically added to the boot menu. Here, you can choose to fine-tune the\n" -"existing options. Double-clicking on an existing entry allows you to change\n" -"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n" -"on to the next installation step." - -#: ../../help.pm_.c:647 -msgid "" -"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n" -"either GNU/Linux or any other operating system present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful to choose the correct parameters.\n" -"\n" -"You may also not want to give access to these other operating systems to\n" -"anyone. In which case, you can delete the corresponding entries. But then,\n" -"you will need a boot disk in order to boot those other operating systems!" -msgstr "" -"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n" -"either GNU/Linux or any other operating system present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful to choose the correct parameters.\n" -"\n" -"You may also not want to give access to these other operating systems to\n" -"anyone. In which case, you can delete the corresponding entries. But then,\n" -"you will need a boot disk in order to boot those other operating systems!" - -#: ../../help.pm_.c:658 -msgid "" -"You must indicate where you wish to place the information required to boot\n" -"to GNU/Linux.\n" -"\n" -"Unless you know exactly what you are doing, choose \"First sector of drive\n" -"(MBR)\"." -msgstr "" -"Morate navesti gdje želite smjestiti informacije koje su potrebne za\n" -"bootanje GNU/Linuxa.\n" -"\n" -"Izaberite \"Prvi sektor na drajvu (MBR)\" sem ako znate tačno šta radite." - -#: ../../help.pm_.c:665 -msgid "" -"Here we select a printing system for your computer to use. Other OSes may\n" -"offer you one, but Mandrake offers three.\n" -"\n" -" * \"pdq\" - which means ``print, don't queue'', is the choice if you have " -"a\n" -"direct connection to your printer and you want to be able to panic out of\n" -"printer jams, and you do not have any networked printers. It will handle\n" -"only very simple network cases and is somewhat slow for networks. Pick\n" -"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n" -"choices after install by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button.\n" -"\n" -" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n" -"your local printer and also halfway round the planet. It is simple and can\n" -"act like a server or a client for the ancient \"lpd\" printing system, so\n" -"it is compatible with the systems that went before. It can do many tricks,\n" -"but the basic setup is almost as easy as \"pdq\". If you need this to\n" -"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" -"graphical front-ends for printing or choosing printer options.\n" -"\n" -" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" -"approximately the same things the others can do, but it will print to\n" -"printers mounted on a Novell Network, because it supports IPX protocol, and\n" -"it can print directly to shell commands. If you have need of Novell or\n" -"printing to commands without using a separate pipe construct, use lprNG.\n" -"Otherwise, CUPS is preferable as it is simpler and better at working over\n" -"networks." -msgstr "" -"Here we select a printing system for your computer to use. Other OSes may\n" -"offer you one, but Mandrake offers three.\n" -"\n" -" * \"pdq\" - which means ``print, don't queue'', is the choice if you have " -"a\n" -"direct connection to your printer and you want to be able to panic out of\n" -"printer jams, and you do not have any networked printers. It will handle\n" -"only very simple network cases and is somewhat slow for networks. Pick\n" -"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n" -"choices after install by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button.\n" -"\n" -" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n" -"your local printer and also halfway round the planet. It is simple and can\n" -"act like a server or a client for the ancient \"lpd\" printing system, so\n" -"it is compatible with the systems that went before. It can do many tricks,\n" -"but the basic setup is almost as easy as \"pdq\". If you need this to\n" -"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" -"graphical front-ends for printing or choosing printer options.\n" -"\n" -" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" -"approximately the same things the others can do, but it will print to\n" -"printers mounted on a Novell Network, because it supports IPX protocol, and\n" -"it can print directly to shell commands. If you have need of Novell or\n" -"printing to commands without using a separate pipe construct, use lprNG.\n" -"Otherwise, CUPS is preferable as it is simpler and better at working over\n" -"networks." - -#: ../../help.pm_.c:693 -msgid "" -"DrakX is now detecting any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n" -"is found DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection will sometimes not detect a piece of hardware\n" -"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" -"if you know that there is a SCSI card installed in your machine. You will\n" -"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" -"no SCSI hardware. If you are unsure you can check the list of hardware\n" -"detected in your machine by selecting \"See hardware info\" and clicking\n" -"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" -"return to the SCSI interface question.\n" -"\n" -"If you have to manually specify your adapter, DrakX will ask if you want to\n" -"specify options for it. You should allow DrakX to probe the hardware for\n" -"the card-specific options that the hardware needs to initialize. This\n" -"usually works well.\n" -"\n" -"If DrakX is not able to probe for the options that need to be passed, you\n" -"will need to manually provide options to the driver. Please review the\n" -"``User Guide'' (chapter 3, section \"Collecting information on your\n" -"hardware\") for hints on retrieving the parameters required from hardware\n" -"documentation, from the manufacturer's web site (if you have Internet\n" -"access) or from Microsoft Windows (if you used this hardware with Windows\n" -"on your system)." -msgstr "" -"DrakX sada pronalazi sve IDE uređaje prisutne na vašem računaru. Također\n" -"će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako SCSI kartica " -"bude\n" -"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n" -"\n" -"Budući da pronalaženje hardware-a ponekad ne uspjeva pronaći neki dio\n" -"hardware-a, DrakX će pitati za potvrdu da li imate SCSI karticu ili ne.\n" -"Kliknite Da ako znate da postoji SCSI kartica instalirana na vašoj mašini.\n" -"Biće vam predstavljena lista SCSI kartica koje možete izabrati. Kliknite Ne\n" -"ako nemate nikakav SCSI hardware. Ako niste sigurni, možete pregledati " -"listu\n" -"hardware u vašoj mašini tako što ćete izabrati \"Vidi hardware info\" i " -"kliknuti\n" -"na OK. Pretražite listu hardware-a i zatim kliknite na dugme OK kako bi se\n" -"vratili na pitanje o SCSI-ju.\n" -"\n" -"Ako morate ručno odabrati adapter, DrakX će vas pitati da li želite navesti\n" -"neke opcije za njega. Trebate dopustiti DrakXu da ispita hardware za\n" -"neke opcije specifične za tu karticu. Ovo obično radi dobro.\n" -"\n" -"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n" -"ručno navesti opcije za drajver. Molimo pogledajte Priručnik za korištenje\n" -"/User Guide/ (poglavlje 3, sekcija \"Prikupljanje informacija o vašem " -"hardveru\")\n" -"za napomene o pribavljanju ovih informacija iz hardverske dokumentacije,\n" -"sa web stranice proizvođača (ako imate internet pristup) ili iz Microsoft\n" -"Windowsa (ako ga imate na vašem sistemu)." - -#: ../../help.pm_.c:720 -msgid "" -"You can add additional entries for yaboot, either for other operating\n" -"systems, alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OS's, the entry consists only of a label and the root partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is simply the name you will have to type at the yaboot " -"prompt\n" -"to select this boot option.\n" -"\n" -" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" -"or a variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or \"/\" for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is used quite often\n" -"to assist in initializing video hardware, or to enable keyboard mouse\n" -"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" -"Apple mouse. The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules, before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" -"need to allocate a large ramdisk, this option can be used.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially brought up in\n" -"read-only, to allow a file system check before the system becomes \"live\".\n" -"Here, you can override this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in \"novideo\" mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by just pressing ENTER at the yaboot prompt. This entry will\n" -"also be highlighted with a \"*\", if you press [Tab] to see the boot\n" -"selections." -msgstr "" -"You can add additional entries for yaboot, either for other operating\n" -"systems, alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OS's, the entry consists only of a label and the root partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is simply the name you will have to type at the yaboot " -"prompt\n" -"to select this boot option.\n" -"\n" -" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" -"or a variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or \"/\" for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is used quite often\n" -"to assist in initializing video hardware, or to enable keyboard mouse\n" -"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" -"Apple mouse. The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules, before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" -"need to allocate a large ramdisk, this option can be used.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially brought up in\n" -"read-only, to allow a file system check before the system becomes \"live\".\n" -"Here, you can override this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in \"novideo\" mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by just pressing ENTER at the yaboot prompt. This entry will\n" -"also be highlighted with a \"*\", if you press [Tab] to see the boot\n" -"selections." - -#: ../../help.pm_.c:765 -msgid "" -"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n" -"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" -"these other operating systems are correctly detected and installed. If this\n" -"is not the case, you can add an entry by hand in this screen. Be careful as\n" -"to choose the correct parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message that is displayed before the boot\n" -"prompt.\n" -"\n" -" * Boot Device: indicate where you want to place the information required " -"to\n" -"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n" -"hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux.\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second before your\n" -"default kernel description is selected.\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose \"N\" for " -"Open\n" -"Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." -msgstr "" -"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n" -"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" -"these other operating systems are correctly detected and installed. If this\n" -"is not the case, you can add an entry by hand in this screen. Be careful as\n" -"to choose the correct parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message that is displayed before the boot\n" -"prompt.\n" -"\n" -" * Boot Device: indicate where you want to place the information required " -"to\n" -"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n" -"hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux.\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second before your\n" -"default kernel description is selected.\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose \"N\" for " -"Open\n" -"Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." - -#: ../../help.pm_.c:798 -msgid "" -"Here are presented various parameters concerning your machine. Depending on\n" -"your installed hardware, you may - or not, see the following entries:\n" -"\n" -" * \"Mouse\": mouse check the current mouse configuration and click on the\n" -"button to change it if necessary.\n" -"\n" -" * \"Keyboard\": keyboard check the current keyboard map configuration and\n" -"click on the button to change that if necessary.\n" -"\n" -" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from " -"the\n" -"language you have chosen. But here again, as for the choice of a keyboard,\n" -"you may not be in the country for which the chosen language should\n" -"correspond. Hence, you may need to click on the \"Timezone\" button in\n" -"order to configure the clock according to the time zone you are in.\n" -"\n" -" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" -"configuration wizard.\n" -"\n" -" * \"Sound card\": if a sound card is detected on your system, it is\n" -"displayed here. No modification possible at installation time.\n" -"\n" -" * \"TV card\": if a TV card is detected on your system, it is displayed\n" -"here. No modification possible at installation time.\n" -"\n" -" * \"ISDN card\": if an ISDN card is detected on your system, it is\n" -"displayed here. You can click on the button to change the parameters\n" -"associated to it." -msgstr "" -"Here are presented various parameters concerning your machine. Depending on\n" -"your installed hardware, you may - or not, see the following entries:\n" -"\n" -" * \"Mouse\": mouse check the current mouse configuration and click on the\n" -"button to change it if necessary.\n" -"\n" -" * \"Keyboard\": keyboard check the current keyboard map configuration and\n" -"click on the button to change that if necessary.\n" -"\n" -" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from " -"the\n" -"language you have chosen. But here again, as for the choice of a keyboard,\n" -"you may not be in the country for which the chosen language should\n" -"correspond. Hence, you may need to click on the \"Timezone\" button in\n" -"order to configure the clock according to the time zone you are in.\n" -"\n" -" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" -"configuration wizard.\n" -"\n" -" * \"Sound card\": if a sound card is detected on your system, it is\n" -"displayed here. No modification possible at installation time.\n" -"\n" -" * \"TV card\": if a TV card is detected on your system, it is displayed\n" -"here. No modification possible at installation time.\n" -"\n" -" * \"ISDN card\": if an ISDN card is detected on your system, it is\n" -"displayed here. You can click on the button to change the parameters\n" -"associated to it." - -#: ../../help.pm_.c:827 -msgid "" -"Choose the hard drive you want to erase to install your new Mandrake Linux\n" -"partition. Be careful, all data present on it will be lost and will not be\n" -"recoverable!" -msgstr "" -"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu " -"Mandrake\n" -"Linux particiju. Budite pažljivi, svi podaci koji se nalaze na njemu će " -"biti\n" -"izgubljeni i neće se moći vratiti!" - -#: ../../help.pm_.c:832 -msgid "" -"Click on \"OK\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"Cancel\" to cancel this operation without losing any data and\n" -"partitions present on this hard drive." -msgstr "" -"Click on \"OK\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"Cancel\" to cancel this operation without losing any data and\n" -"partitions present on this hard drive." - -#: ../../install2.pm_.c:114 -#, c-format -msgid "" -"Can't access kernel modules corresponding to your kernel (file %s is missing)" -msgstr "" -"Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu (nedostaje " -"datoteka %s)" - -#: ../../install_any.pm_.c:421 -#, c-format -msgid "" -"You have selected the following server(s): %s\n" -"\n" -"\n" -"These servers are activated by default. They don't have any known security\n" -"issues, but some new could be found. In that case, you must make sure to " -"upgrade\n" -"as soon as possible.\n" -"\n" -"\n" -"Do you really want to install these servers?\n" -msgstr "" -"Izabrali ste sljedeći server (servere): %s\n" -"\n" -"\n" -"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih " -"sigurnosnih\n" -"problema, ali možda će biti pronađeni neki novi. U tom slučaju, morate ih\n" -"unaprijediti što prije bude moguće.\n" -"\n" -"\n" -"Da li zaista želite instalirati ove servere?\n" - -#: ../../install_any.pm_.c:457 -msgid "Can't use broadcast with no NIS domain" -msgstr "Ne mogu koristiti broadcast bez NIS domene" - -#: ../../install_any.pm_.c:793 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s" -msgstr "Ubacite FAT formatiranu disketu u drajv %s" - -#: ../../install_any.pm_.c:797 -msgid "This floppy is not FAT formatted" -msgstr "Ova disketa nije FAT (DOS/Windows) formatirana" - -#: ../../install_any.pm_.c:809 -msgid "" -"To use this saved packages selection, boot installation with ``linux " -"defcfg=floppy''" -msgstr "" -"Da koristite ovaj izbor spašenih paketa, bootajte instalaciju sa ``linux " -"defcfg=floppy''" - -#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737 -#, c-format -msgid "Error reading file %s" -msgstr "Greška u čitanju datoteke %s" - -#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325 -#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122 -#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308 -#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 -#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415 -#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738 -msgid "Ok" -msgstr "Ok" - -#: ../../install_interactive.pm_.c:23 -#, c-format -msgid "" -"Some hardware on your computer needs ``proprietary'' drivers to work.\n" -"You can find some information about them at: %s" -msgstr "" -"Neki dio hardware-a na vašem računaru zahtjeva ``posjedovane'' drajvere za " -"rad.\n" -"Možete naći više podataka o njima na: %s" - -#: ../../install_interactive.pm_.c:44 -msgid "" -"You must have a root partition.\n" -"For this, create a partition (or click on an existing one).\n" -"Then choose action ``Mount point'' and set it to `/'" -msgstr "" -"Morate imati root particiju.\n" -"Za ovo, kreirajte particiju (ili kliknite na neku od postojećih).\n" -"Zatim izaberite ``Tačka montiranja'' i postavite ga na `/'" - -#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259 -msgid "You must have a swap partition" -msgstr "Morate imati swap particiju" - -#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261 -msgid "" -"You don't have a swap partition\n" -"\n" -"Continue anyway?" -msgstr "" -"Nemate nijednu swap particiju\n" -"\n" -"Svejedno nastavi?" - -#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165 -msgid "You must have a FAT partition mounted in /boot/efi" -msgstr "Morate imati FAT particiju montiranu na /boot/efi" - -#: ../../install_interactive.pm_.c:76 -msgid "Use free space" -msgstr "Koristi slobodan prostor" - -#: ../../install_interactive.pm_.c:78 -msgid "Not enough free space to allocate new partitions" -msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija" - -#: ../../install_interactive.pm_.c:86 -msgid "Use existing partition" -msgstr "Koristi postojeću particiju" - -#: ../../install_interactive.pm_.c:88 -msgid "There is no existing partition to use" -msgstr "Nema nijedne postojeće particije za upotrebu" - -#: ../../install_interactive.pm_.c:95 -msgid "Use the Windows partition for loopback" -msgstr "Koristi Windows particiju za loopback" - -#: ../../install_interactive.pm_.c:98 -msgid "Which partition do you want to use for Linux4Win?" -msgstr "Koju particiju želite koristiti za Linux4Win?" - -#: ../../install_interactive.pm_.c:100 -msgid "Choose the sizes" -msgstr "Izaberite veličine" - -#: ../../install_interactive.pm_.c:101 -msgid "Root partition size in MB: " -msgstr "Veličina root particije u MB:" - -#: ../../install_interactive.pm_.c:102 -msgid "Swap partition size in MB: " -msgstr "Veličina swap particije u MB:" - -#: ../../install_interactive.pm_.c:111 -msgid "Use the free space on the Windows partition" -msgstr "Koristi slobodan prostor na Windows particiji" - -#: ../../install_interactive.pm_.c:114 -msgid "Which partition do you want to resize?" -msgstr "Kojoj particiji želite promjeniti veličinu?" - -#: ../../install_interactive.pm_.c:116 -msgid "Computing Windows filesystem bounds" -msgstr "Izračunavam granice Windows datotečnog sistema" - -#: ../../install_interactive.pm_.c:119 -#, c-format -msgid "" -"The FAT resizer is unable to handle your partition, \n" -"the following error occured: %s" -msgstr "" -"FAT resizer ne može izmjeniti vašu particiju, \n" -"došlo je do sljedeće greške: %s" - -#: ../../install_interactive.pm_.c:122 -msgid "Your Windows partition is too fragmented, please run ``defrag'' first" -msgstr "" -"Vaša Windows particija je previše fragmentirana, molimo prvo pokrenite " -"``defrag'' " - -#: ../../install_interactive.pm_.c:123 -msgid "" -"WARNING!\n" -"\n" -"DrakX will now resize your Windows partition. Be careful: this operation is\n" -"dangerous. If you have not already done so, you should first exit the\n" -"installation, run scandisk under Windows (and optionally run defrag), then\n" -"restart the installation. You should also backup your data.\n" -"When sure, press Ok." -msgstr "" -"UPOZORENJE!\n" -"\n" -"DrakX će sada promjeniti veličinu vaše Windows particije. Budite pažljivi, " -"ova\n" -"operacija je opasna. Ako to već niste uradili, najprije napustite " -"instalaciju,\n" -"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n" -"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n" -"Kada ste sigurni, kliknite na Ok." - -#: ../../install_interactive.pm_.c:132 -msgid "Which size do you want to keep for windows on" -msgstr "Koju veličinu želite da sačuvate za windows na" - -#: ../../install_interactive.pm_.c:133 -#, c-format -msgid "partition %s" -msgstr "particiji %s" - -#: ../../install_interactive.pm_.c:139 -#, c-format -msgid "FAT resizing failed: %s" -msgstr "FAT promjena veličine nije uspjela: %s" - -#: ../../install_interactive.pm_.c:154 -msgid "" -"There is no FAT partitions to resize or to use as loopback (or not enough " -"space left)" -msgstr "" -"Ne postoji nijedna FAT particija za promjenu veličine ili upotrebu za " -"loopback (ili nije ostalo dovoljno prostora)" - -#: ../../install_interactive.pm_.c:160 -msgid "Erase entire disk" -msgstr "Pobriši čitav disk" - -#: ../../install_interactive.pm_.c:160 -msgid "Remove Windows(TM)" -msgstr "Ukloni Windows(TM)" - -#: ../../install_interactive.pm_.c:163 -msgid "You have more than one hard drive, which one do you install linux on?" -msgstr "Imate više od jednog hard diska, na koji želite instalirati linux?" - -#: ../../install_interactive.pm_.c:166 -#, c-format -msgid "ALL existing partitions and their data will be lost on drive %s" -msgstr "" -"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s" - -#: ../../install_interactive.pm_.c:174 -msgid "Custom disk partitioning" -msgstr "Ručno particioniranje diska" - -#: ../../install_interactive.pm_.c:178 -msgid "Use fdisk" -msgstr "Koristi fdisk" - -#: ../../install_interactive.pm_.c:181 -#, c-format -msgid "" -"You can now partition %s.\n" -"When you are done, don't forget to save using `w'" -msgstr "" -"Sada možete particionirati %s.\n" -"Kada završite, ne zaboravite spasiti sa `w'" - -#: ../../install_interactive.pm_.c:210 -msgid "You don't have enough free space on your Windows partition" -msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji" - -#: ../../install_interactive.pm_.c:226 -msgid "I can't find any room for installing" -msgstr "Ne mogu naći dovoljno prostora za instalaciju" - -#: ../../install_interactive.pm_.c:230 -msgid "The DrakX Partitioning wizard found the following solutions:" -msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:" - -#: ../../install_interactive.pm_.c:235 -#, c-format -msgid "Partitioning failed: %s" -msgstr "Particioniranje nije uspjelo: %s" - -#: ../../install_interactive.pm_.c:241 -msgid "Bringing up the network" -msgstr "Pokrećem mrežu" - -#: ../../install_interactive.pm_.c:246 -msgid "Bringing down the network" -msgstr "Zaustavljam mrežu" - -#: ../../install_steps.pm_.c:73 -msgid "" -"An error occurred, but I don't know how to handle it nicely.\n" -"Continue at your own risk." -msgstr "" -"Došlo je do greške, ali ne znam kako da je riješim fino.\n" -"Nastavite na vlastiti rizik." - -#: ../../install_steps.pm_.c:207 -#, c-format -msgid "Duplicate mount point %s" -msgstr "Dvostruka tačka montiranja %s" - -#: ../../install_steps.pm_.c:384 -msgid "" -"Some important packages didn't get installed properly.\n" -"Either your cdrom drive or your cdrom is defective.\n" -"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" -"\"\n" -msgstr "" -"Neki bitni paketi nisu ispravno instalirani.\n" -"Ili je vaš cdrom drajv neispravan ili vaš cdrom medij.\n" -"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl Mandrake/RPMS/" -"*.rpm\"\n" - -#: ../../install_steps.pm_.c:459 -#, c-format -msgid "Welcome to %s" -msgstr "Dobro došli u %s" - -#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709 -msgid "No floppy drive available" -msgstr "Nema pogodne disketne jedinice" - -#: ../../install_steps_auto_install.pm_.c:77 -#: ../../install_steps_stdio.pm_.c:23 -#, c-format -msgid "Entering step `%s'\n" -msgstr "Prelazim na korak `%s'\n" - -#: ../../install_steps_graphical.pm_.c:287 -msgid "Choose the size you want to install" -msgstr "Izaberite veličinu koju želite instalirati" - -#: ../../install_steps_graphical.pm_.c:334 -msgid "Total size: " -msgstr "Ukupna veličina:" - -#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387 -#, c-format -msgid "Version: %s\n" -msgstr "Verzija: %s\n" - -#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388 -#, c-format -msgid "Size: %d KB\n" -msgstr "Veličina: %d KB\n" - -#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481 -#: ../../install_steps_interactive.pm_.c:509 -msgid "Choose the packages you want to install" -msgstr "Izaberite pakete koje želite instalirati" - -#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571 -msgid "Info" -msgstr "Info" - -#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457 -#: ../../install_steps_interactive.pm_.c:212 -msgid "Install" -msgstr "Instalacija" - -#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497 -#: ../../install_steps_interactive.pm_.c:695 -msgid "Installing" -msgstr "Instaliram" - -#: ../../install_steps_graphical.pm_.c:499 -msgid "Please wait, " -msgstr "Molimo sačekajte, " - -#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510 -msgid "Time remaining " -msgstr "Preostalo vremena " - -#: ../../install_steps_graphical.pm_.c:502 -msgid "Total time " -msgstr "Ukupno vrijeme " - -#: ../../install_steps_graphical.pm_.c:507 -#: ../../install_steps_interactive.pm_.c:695 -msgid "Preparing installation" -msgstr "Pripremam instalaciju" - -#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558 -#, c-format -msgid "Installing package %s" -msgstr "Instaliram paket %s" - -#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642 -#: ../../install_steps_gtk.pm_.c:646 -msgid "Go on anyway?" -msgstr "Svejedno nastavi?" - -#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642 -msgid "There was an error ordering packages:" -msgstr "Došlo je do greške pri naručivanju paketa:" - -#: ../../install_steps_graphical.pm_.c:577 -msgid "Use existing configuration for X11?" -msgstr "Koristi postojeću konfiguraciju za X11?" - -#: ../../install_steps_gtk.pm_.c:148 -msgid "" -"Your system is low on resource. You may have some problem installing\n" -"Mandrake Linux. If that occurs, you can try a text install instead. For " -"this,\n" -"press `F1' when booting on CDROM, then enter `text'." -msgstr "" -"Vaš sistem ima nizak nivo resursa. Možda imate neki problem sa instalacijom\n" -"Mandrake Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za " -"ovo,\n" -"pritisnite `F1' prilikom bootanja na CDROMu, zatim unesite `text'." - -#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187 -msgid "Install Class" -msgstr "Klasa instalacije" - -#: ../../install_steps_gtk.pm_.c:162 -msgid "Please, choose one of the following classes of installation:" -msgstr "Molimo izaberite jednu od sljedećih klasa instalacije:" - -#: ../../install_steps_gtk.pm_.c:228 -#, c-format -msgid "" -"The total size for the groups you have selected is approximately %d MB.\n" -msgstr "Ukupna veličina grupa koje ste izabrali je otprilike %d MB.\n" - -#: ../../install_steps_gtk.pm_.c:230 -#, c-format -msgid "" -"If you wish to install less than this size,\n" -"select the percentage of packages that you want to install.\n" -"\n" -"A low percentage will install only the most important packages;\n" -"a percentage of 100%% will install all selected packages." -msgstr "" -"Ako želite da instalirate manje od ove veličine,\n" -"izaberite procenat paketa koje želite instalirati.\n" -"\n" -"Nizak procenat će instalirati samo one najbitnije pakete;\n" -"procenat 100%% će instalirati sve izabrane pakete." - -#: ../../install_steps_gtk.pm_.c:235 -#, c-format -msgid "" -"You have space on your disk for only %d%% of these packages.\n" -"\n" -"If you wish to install less than this,\n" -"select the percentage of packages that you want to install.\n" -"A low percentage will install only the most important packages;\n" -"a percentage of %d%% will install as many packages as possible." -msgstr "" -"Na disku imate mjesta samo za %d%% ovih paketa.\n" -"\n" -"Ako želite da instalirate manje od ovoga,\n" -"izaberite procenat paketa koje želite da instalirate.\n" -"Nizak procenat će instalirati samo one najbitnije pakete;\n" -"procenat %d%% će instalirati najveći mogući broj paketa." - -#: ../../install_steps_gtk.pm_.c:241 -msgid "You will be able to choose them more specifically in the next step." -msgstr "" -"Na idućem koraku ćete biti u mogućnosti da ih izaberete nešto preciznije." - -#: ../../install_steps_gtk.pm_.c:243 -msgid "Percentage of packages to install" -msgstr "Procenat paketa za instalaciju" - -#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619 -msgid "Package Group Selection" -msgstr "Izbor grupe paketa" - -#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634 -msgid "Individual package selection" -msgstr "Izbor pojedinačnih paketa" - -#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598 -#, c-format -msgid "Total size: %d / %d MB" -msgstr "Ukupna veličina: %d / %d MB" - -#: ../../install_steps_gtk.pm_.c:385 -msgid "Bad package" -msgstr "Neispravan paket" - -#: ../../install_steps_gtk.pm_.c:386 -#, c-format -msgid "Name: %s\n" -msgstr "Ime: %s\n" - -#: ../../install_steps_gtk.pm_.c:389 -#, c-format -msgid "Importance: %s\n" -msgstr "Značaj: %s\n" - -#: ../../install_steps_gtk.pm_.c:411 -msgid "" -"You can't select this package as there is not enough space left to install it" -msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega" - -#: ../../install_steps_gtk.pm_.c:416 -msgid "The following packages are going to be installed" -msgstr "Sljedeći paketi će biti instalirani" - -#: ../../install_steps_gtk.pm_.c:417 -msgid "The following packages are going to be removed" -msgstr "Sljedeći paketi će biti uklonjeni" - -#: ../../install_steps_gtk.pm_.c:429 -msgid "You can't select/unselect this package" -msgstr "Ne možete izabrati/isključiti ovaj paket" - -#: ../../install_steps_gtk.pm_.c:441 -msgid "This is a mandatory package, it can't be unselected" -msgstr "Ovo je obavezan paket, ne može biti isključen" - -#: ../../install_steps_gtk.pm_.c:443 -msgid "You can't unselect this package. It is already installed" -msgstr "Ne možete isključiti ovaj paket. On je već instaliran" - -#: ../../install_steps_gtk.pm_.c:447 -msgid "" -"This package must be upgraded\n" -"Are you sure you want to deselect it?" -msgstr "" -"Ovaj paket mora biti unaprijeđen\n" -"Jeste li sigurni da ga želite isključiti?" - -#: ../../install_steps_gtk.pm_.c:451 -msgid "You can't unselect this package. It must be upgraded" -msgstr "Ne možete isključiti ovaj paket. On mora biti unaprijeđen" - -#: ../../install_steps_gtk.pm_.c:456 -msgid "Show automatically selected packages" -msgstr "Automatski prikaži izabrane pakete" - -#: ../../install_steps_gtk.pm_.c:460 -msgid "Load/Save on floppy" -msgstr "Učitaj/Spasi na disketu" - -#: ../../install_steps_gtk.pm_.c:461 -msgid "Updating package selection" -msgstr "Osvježavam izbor paketa" - -#: ../../install_steps_gtk.pm_.c:466 -msgid "Minimal install" -msgstr "Minimalna instalacija" - -#: ../../install_steps_gtk.pm_.c:503 -msgid "Estimating" -msgstr "Procjenjujem" - -#: ../../install_steps_gtk.pm_.c:522 -msgid "Please wait, preparing installation" -msgstr "Molimo sačekajte, pripremam instalaciju" - -#: ../../install_steps_gtk.pm_.c:553 -#, c-format -msgid "%d packages" -msgstr "%d paketa" - -#: ../../install_steps_gtk.pm_.c:599 -msgid "" -"\n" -"Warning\n" -"\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" -"\n" -"\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" -"\n" -"\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" -msgstr "" -"\n" -"Warning\n" -"\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" -"\n" -"\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" -"\n" -"\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" - -#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148 -msgid "Accept" -msgstr "Prihvati" - -#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148 -msgid "Refuse" -msgstr "Odbij" - -#: ../../install_steps_gtk.pm_.c:628 -#, c-format -msgid "" -"Change your Cd-Rom!\n" -"\n" -"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " -"done.\n" -"If you don't have it, press Cancel to avoid installation from this Cd-Rom." -msgstr "" -"Promjenite vaš CD-ROM!\n" -"\n" -"Molimo ubacite CD-ROM označen sa \"%s\" u vaš drajv i pritisnite Ok kad ste " -"spremni.\n" -"Ako ga nemate, pritisnite Odustani da biste izbjegli instaliranje sa ovog CD-" -"ROMa." - -#: ../../install_steps_gtk.pm_.c:646 -msgid "There was an error installing packages:" -msgstr "Došlo je do greške kod instaliranja paketa:" - -#: ../../install_steps_interactive.pm_.c:37 -msgid "An error occurred" -msgstr "Došlo je do greške" - -#: ../../install_steps_interactive.pm_.c:71 -msgid "License agreement" -msgstr "Licencni ugovor" - -#: ../../install_steps_interactive.pm_.c:72 -msgid "" -"Introduction\n" -"\n" -"The operating system and the different components available in the Mandrake " -"Linux distribution \n" -"shall be called the \"Software Products\" hereafter. The Software Products " -"include, but are not \n" -"restricted to, the set of programs, methods, rules and documentation related " -"to the operating \n" -"system and the different components of the Mandrake Linux distribution.\n" -"\n" -"\n" -"1. License Agreement\n" -"\n" -"Please read carefully this document. This document is a license agreement " -"between you and \n" -"MandrakeSoft S.A. which applies to the Software Products.\n" -"By installing, duplicating or using the Software Products in any manner, you " -"explicitly \n" -"accept and fully agree to conform to the terms and conditions of this " -"License. \n" -"If you disagree with any portion of the License, you are not allowed to " -"install, duplicate or use \n" -"the Software Products. \n" -"Any attempt to install, duplicate or use the Software Products in a manner " -"which does not comply \n" -"with the terms and conditions of this License is void and will terminate " -"your rights under this \n" -"License. Upon termination of the License, you must immediately destroy all " -"copies of the \n" -"Software Products.\n" -"\n" -"\n" -"2. Limited Warranty\n" -"\n" -"The Software Products and attached documentation are provided \"as is\", " -"with no warranty, to the \n" -"extent permitted by law.\n" -"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " -"law, be liable for any special,\n" -"incidental, direct or indirect damages whatsoever (including without " -"limitation damages for loss of \n" -"business, interruption of business, financial loss, legal fees and penalties " -"resulting from a court \n" -"judgment, or any other consequential loss) arising out of the use or " -"inability to use the Software \n" -"Products, even if MandrakeSoft S.A. has been advised of the possibility or " -"occurance of such \n" -"damages.\n" -"\n" -"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " -"COUNTRIES\n" -"\n" -"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " -"in no circumstances, be \n" -"liable for any special, incidental, direct or indirect damages whatsoever " -"(including without \n" -"limitation damages for loss of business, interruption of business, financial " -"loss, legal fees \n" -"and penalties resulting from a court judgment, or any other consequential " -"loss) arising out \n" -"of the possession and use of software components or arising out of " -"downloading software components \n" -"from one of Mandrake Linux sites which are prohibited or restricted in some " -"countries by local laws.\n" -"This limited liability applies to, but is not restricted to, the strong " -"cryptography components \n" -"included in the Software Products.\n" -"\n" -"\n" -"3. The GPL License and Related Licenses\n" -"\n" -"The Software Products consist of components created by different persons or " -"entities. Most \n" -"of these components are governed under the terms and conditions of the GNU " -"General Public \n" -"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -"licenses allow you to use, \n" -"duplicate, adapt or redistribute the components which they cover. Please " -"read carefully the terms \n" -"and conditions of the license agreement for each component before using any " -"component. Any question \n" -"on a component license should be addressed to the component author and not " -"to MandrakeSoft.\n" -"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " -"Documentation written \n" -"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " -"documentation for \n" -"further details.\n" -"\n" -"\n" -"4. Intellectual Property Rights\n" -"\n" -"All rights to the components of the Software Products belong to their " -"respective authors and are \n" -"protected by intellectual property and copyright laws applicable to software " -"programs.\n" -"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -"Products, as a whole or in \n" -"parts, by all means and for all purposes.\n" -"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " -"MandrakeSoft S.A. \n" -"\n" -"\n" -"5. Governing Laws \n" -"\n" -"If any portion of this agreement is held void, illegal or inapplicable by a " -"court judgment, this \n" -"portion is excluded from this contract. You remain bound by the other " -"applicable sections of the \n" -"agreement.\n" -"The terms and conditions of this License are governed by the Laws of " -"France.\n" -"All disputes on the terms of this license will preferably be settled out of " -"court. As a last \n" -"resort, the dispute will be referred to the appropriate Courts of Law of " -"Paris - France.\n" -"For any question on this document, please contact MandrakeSoft S.A. \n" -msgstr "" -"Introduction\n" -"\n" -"The operating system and the different components available in the Mandrake " -"Linux distribution \n" -"shall be called the \"Software Products\" hereafter. The Software Products " -"include, but are not \n" -"restricted to, the set of programs, methods, rules and documentation related " -"to the operating \n" -"system and the different components of the Mandrake Linux distribution.\n" -"\n" -"\n" -"1. License Agreement\n" -"\n" -"Please read carefully this document. This document is a license agreement " -"between you and \n" -"MandrakeSoft S.A. which applies to the Software Products.\n" -"By installing, duplicating or using the Software Products in any manner, you " -"explicitly \n" -"accept and fully agree to conform to the terms and conditions of this " -"License. \n" -"If you disagree with any portion of the License, you are not allowed to " -"install, duplicate or use \n" -"the Software Products. \n" -"Any attempt to install, duplicate or use the Software Products in a manner " -"which does not comply \n" -"with the terms and conditions of this License is void and will terminate " -"your rights under this \n" -"License. Upon termination of the License, you must immediately destroy all " -"copies of the \n" -"Software Products.\n" -"\n" -"\n" -"2. Limited Warranty\n" -"\n" -"The Software Products and attached documentation are provided \"as is\", " -"with no warranty, to the \n" -"extent permitted by law.\n" -"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " -"law, be liable for any special,\n" -"incidental, direct or indirect damages whatsoever (including without " -"limitation damages for loss of \n" -"business, interruption of business, financial loss, legal fees and penalties " -"resulting from a court \n" -"judgment, or any other consequential loss) arising out of the use or " -"inability to use the Software \n" -"Products, even if MandrakeSoft S.A. has been advised of the possibility or " -"occurance of such \n" -"damages.\n" -"\n" -"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " -"COUNTRIES\n" -"\n" -"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " -"in no circumstances, be \n" -"liable for any special, incidental, direct or indirect damages whatsoever " -"(including without \n" -"limitation damages for loss of business, interruption of business, financial " -"loss, legal fees \n" -"and penalties resulting from a court judgment, or any other consequential " -"loss) arising out \n" -"of the possession and use of software components or arising out of " -"downloading software components \n" -"from one of Mandrake Linux sites which are prohibited or restricted in some " -"countries by local laws.\n" -"This limited liability applies to, but is not restricted to, the strong " -"cryptography components \n" -"included in the Software Products.\n" -"\n" -"\n" -"3. The GPL License and Related Licenses\n" -"\n" -"The Software Products consist of components created by different persons or " -"entities. Most \n" -"of these components are governed under the terms and conditions of the GNU " -"General Public \n" -"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " -"licenses allow you to use, \n" -"duplicate, adapt or redistribute the components which they cover. Please " -"read carefully the terms \n" -"and conditions of the license agreement for each component before using any " -"component. Any question \n" -"on a component license should be addressed to the component author and not " -"to MandrakeSoft.\n" -"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " -"Documentation written \n" -"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " -"documentation for \n" -"further details.\n" -"\n" -"\n" -"4. Intellectual Property Rights\n" -"\n" -"All rights to the components of the Software Products belong to their " -"respective authors and are \n" -"protected by intellectual property and copyright laws applicable to software " -"programs.\n" -"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " -"Products, as a whole or in \n" -"parts, by all means and for all purposes.\n" -"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " -"MandrakeSoft S.A. \n" -"\n" -"\n" -"5. Governing Laws \n" -"\n" -"If any portion of this agreement is held void, illegal or inapplicable by a " -"court judgment, this \n" -"portion is excluded from this contract. You remain bound by the other " -"applicable sections of the \n" -"agreement.\n" -"The terms and conditions of this License are governed by the Laws of " -"France.\n" -"All disputes on the terms of this license will preferably be settled out of " -"court. As a last \n" -"resort, the dispute will be referred to the appropriate Courts of Law of " -"Paris - France.\n" -"For any question on this document, please contact MandrakeSoft S.A. \n" - -#: ../../install_steps_interactive.pm_.c:168 -#: ../../install_steps_interactive.pm_.c:871 -#: ../../standalone/keyboarddrake_.c:28 -msgid "Keyboard" -msgstr "Tastatura" - -#: ../../install_steps_interactive.pm_.c:169 -#: ../../standalone/keyboarddrake_.c:29 -msgid "Please, choose your keyboard layout." -msgstr "Molimo izaberite izgled vaše tastature." - -#: ../../install_steps_interactive.pm_.c:170 -msgid "Here is the full list of keyboards available" -msgstr "Ovdje je puna lista svih dostupnih tastatura" - -#: ../../install_steps_interactive.pm_.c:187 -msgid "Which installation class do you want?" -msgstr "Koju klasu instalacije želite?" - -#: ../../install_steps_interactive.pm_.c:189 -msgid "Install/Update" -msgstr "Instaliraj/Unaprijedi" - -#: ../../install_steps_interactive.pm_.c:189 -msgid "Is this an install or an update?" -msgstr "Da li je ovo instalacija ili update?" - -#: ../../install_steps_interactive.pm_.c:198 -msgid "Recommended" -msgstr "Preporučeno" - -#: ../../install_steps_interactive.pm_.c:201 -#: ../../install_steps_interactive.pm_.c:204 -msgid "Expert" -msgstr "Expert" - -#: ../../install_steps_interactive.pm_.c:212 -msgid "Update" -msgstr "Update" - -#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48 -msgid "Please, choose the type of your mouse." -msgstr "Molimo izaberite vrstu vašeg miša." - -#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64 -msgid "Mouse Port" -msgstr "Port miša" - -#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65 -msgid "Please choose on which serial port your mouse is connected to." -msgstr "Molimo izaberite na kojem serijskom portu je spojen vaš miš." - -#: ../../install_steps_interactive.pm_.c:239 -msgid "Buttons emulation" -msgstr "Emulacija tipki" - -#: ../../install_steps_interactive.pm_.c:241 -msgid "Button 2 Emulation" -msgstr "Emulacija 2 dugmeta" - -#: ../../install_steps_interactive.pm_.c:242 -msgid "Button 3 Emulation" -msgstr "Emulacija 3 dugmeta" - -#: ../../install_steps_interactive.pm_.c:261 -msgid "Configuring PCMCIA cards..." -msgstr "Podešavam PCMCIA kartice..." - -#: ../../install_steps_interactive.pm_.c:261 -msgid "PCMCIA" -msgstr "PCMCIA" - -#: ../../install_steps_interactive.pm_.c:266 -msgid "Configuring IDE" -msgstr "Podešavam IDE" - -#: ../../install_steps_interactive.pm_.c:266 -msgid "IDE" -msgstr "IDE" - -#: ../../install_steps_interactive.pm_.c:281 -msgid "no available partitions" -msgstr "nema dostupnih particija" - -#: ../../install_steps_interactive.pm_.c:284 -msgid "Scanning partitions to find mount points" -msgstr "Pretražujem particije da nađem tačke montiranja" - -#: ../../install_steps_interactive.pm_.c:292 -msgid "Choose the mount points" -msgstr "Izaberite tačke montiranja" - -#: ../../install_steps_interactive.pm_.c:311 -#, c-format -msgid "" -"I can't read your partition table, it's too corrupted for me :(\n" -"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" -"The other solution is to disallow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to loose all the partitions?\n" -msgstr "" -"Ne mogu pročitati vašu tabelu particija, previše je oštećena za mene :(\n" -"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n" -"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n" -"(greška je %s)\n" -"\n" -"Slažete li se sa gubitkom svih particija?\n" - -#: ../../install_steps_interactive.pm_.c:324 -msgid "" -"DiskDrake failed to read correctly the partition table.\n" -"Continue at your own risk!" -msgstr "" -"DiskDrake nije uspio ispravno pročitati tabelu particija.\n" -"Nastavljate na vlastiti rizik!" - -#: ../../install_steps_interactive.pm_.c:340 -msgid "" -"No free space for 1MB bootstrap! Install will continue, but to boot your " -"system, you'll need to create the bootstrap partition in DiskDrake" -msgstr "" -"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će " -"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap " -"particiju u DiskDrake-u" - -#: ../../install_steps_interactive.pm_.c:349 -msgid "No root partition found to perform an upgrade" -msgstr "Nije pronađena nijedna root particija radi unaprjeđivanja" - -#: ../../install_steps_interactive.pm_.c:350 -msgid "Root Partition" -msgstr "Root particija" - -#: ../../install_steps_interactive.pm_.c:351 -msgid "What is the root partition (/) of your system?" -msgstr "Šta je root particija (/) vašeg sistema?" - -#: ../../install_steps_interactive.pm_.c:365 -msgid "You need to reboot for the partition table modifications to take place" -msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu" - -#: ../../install_steps_interactive.pm_.c:389 -msgid "Choose the partitions you want to format" -msgstr "Izaberite particije koje želite formatirati" - -#: ../../install_steps_interactive.pm_.c:390 -msgid "Check bad blocks?" -msgstr "Provjeri loše blokove?" - -#: ../../install_steps_interactive.pm_.c:416 -msgid "Formatting partitions" -msgstr "Formatiram particije" - -#: ../../install_steps_interactive.pm_.c:418 -#, c-format -msgid "Creating and formatting file %s" -msgstr "Kreiram i formatiram datoteku %s" - -#: ../../install_steps_interactive.pm_.c:421 -msgid "Not enough swap to fulfill installation, please add some" -msgstr "" -"Nemam dovoljno swap prostora da dovršim instalaciju, molimo dodajte još" - -#: ../../install_steps_interactive.pm_.c:427 -msgid "Looking for available packages" -msgstr "Tražim dostupne pakete" - -#: ../../install_steps_interactive.pm_.c:433 -msgid "Finding packages to upgrade" -msgstr "Pronalazim pakete za unaprjeđenje" - -#: ../../install_steps_interactive.pm_.c:450 -#, c-format -msgid "" -"Your system has not enough space left for installation or upgrade (%d > %d)" -msgstr "" -"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje " -"(%d > %d)" - -#: ../../install_steps_interactive.pm_.c:469 -#, c-format -msgid "Complete (%dMB)" -msgstr "Potpuna (%dMB)" - -#: ../../install_steps_interactive.pm_.c:469 -#, c-format -msgid "Minimum (%dMB)" -msgstr "Minimalna (%dMB)" - -#: ../../install_steps_interactive.pm_.c:469 -#, c-format -msgid "Recommended (%dMB)" -msgstr "Preporučena (%dMB)" - -#: ../../install_steps_interactive.pm_.c:475 -msgid "Custom" -msgstr "Ručno izaberi" - -#: ../../install_steps_interactive.pm_.c:522 -msgid "" -"Please choose load or save package selection on floppy.\n" -"The format is the same as auto_install generated floppies." -msgstr "" -"Molimo izaberite učitaj ili spasi izbor paketa na disketu.\n" -"Format je isti kao i diskete koje generiše auto_install" - -#: ../../install_steps_interactive.pm_.c:525 -msgid "Load from floppy" -msgstr "Vrati sa diskete" - -#: ../../install_steps_interactive.pm_.c:527 -msgid "Loading from floppy" -msgstr "Vraćam sa diskete" - -#: ../../install_steps_interactive.pm_.c:527 -msgid "Package selection" -msgstr "Izbor paketa" - -#: ../../install_steps_interactive.pm_.c:532 -msgid "Insert a floppy containing package selection" -msgstr "Ubacite disketu koja sadrži izbor paketa" - -#: ../../install_steps_interactive.pm_.c:544 -msgid "Save on floppy" -msgstr "Spasi na disketu" - -#: ../../install_steps_interactive.pm_.c:605 -msgid "Selected size is larger than available space" -msgstr "Izabrana veličina je veća od slobodnog prostora" - -#: ../../install_steps_interactive.pm_.c:670 -msgid "" -"If you have all the CDs in the list below, click Ok.\n" -"If you have none of those CDs, click Cancel.\n" -"If only some CDs are missing, unselect them, then click Ok." -msgstr "" -"Ako imate sve CDe na listi, kliknite na Ok.\n" -"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n" -"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na Ok." - -#: ../../install_steps_interactive.pm_.c:675 -#, c-format -msgid "Cd-Rom labeled \"%s\"" -msgstr "CD-ROM pod oznakom \"%s\"" - -#: ../../install_steps_interactive.pm_.c:704 -#, c-format -msgid "" -"Installing package %s\n" -"%d%%" -msgstr "" -"Instaliram paket %s\n" -"%d%%" - -#: ../../install_steps_interactive.pm_.c:713 -msgid "Post-install configuration" -msgstr "Post-instalacijsko podešavanje" - -#: ../../install_steps_interactive.pm_.c:719 -#, c-format -msgid "Please insert the Boot floppy used in drive %s" -msgstr "Molimo ubacite boot disketu koja je upotrebljena u jedinicu %s" - -#: ../../install_steps_interactive.pm_.c:725 -#, c-format -msgid "Please insert the Update Modules floppy in drive %s" -msgstr "Molimo ubacite disketu Update Modula u drajv %s" - -#: ../../install_steps_interactive.pm_.c:750 -msgid "" -"You have now the possibility to download software aimed for encryption.\n" -"\n" -"WARNING:\n" -"\n" -"Due to different general requirements applicable to these software and " -"imposed\n" -"by various jurisdictions, customer and/or end user of theses software " -"should\n" -"ensure that the laws of his/their jurisdiction allow him/them to download, " -"stock\n" -"and/or use these software.\n" -"\n" -"In addition customer and/or end user shall particularly be aware to not " -"infringe\n" -"the laws of his/their jurisdiction. Should customer and/or end user not\n" -"respect the provision of these applicable laws, he/they will incure serious\n" -"sanctions.\n" -"\n" -"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " -"liable\n" -"for special, indirect or incidental damages whatsoever (including, but not\n" -"limited to loss of profits, business interruption, loss of commercial data " -"and\n" -"other pecuniary losses, and eventual liabilities and indemnification to be " -"paid\n" -"pursuant to a court decision) arising out of use, possession, or the sole\n" -"downloading of these software, to which customer and/or end user could\n" -"eventually have access after having sign up the present agreement.\n" -"\n" -"\n" -"For any queries relating to these agreement, please contact \n" -"Mandrakesoft, Inc.\n" -"2400 N. Lincoln Avenue Suite 243\n" -"Altadena California 91001\n" -"USA" -msgstr "" -"You have now the possibility to download software aimed for encryption.\n" -"\n" -"WARNING:\n" -"\n" -"Due to different general requirements applicable to these software and " -"imposed\n" -"by various jurisdictions, customer and/or end user of theses software " -"should\n" -"ensure that the laws of his/their jurisdiction allow him/them to download, " -"stock\n" -"and/or use these software.\n" -"\n" -"In addition customer and/or end user shall particularly be aware to not " -"infringe\n" -"the laws of his/their jurisdiction. Should customer and/or end user not\n" -"respect the provision of these applicable laws, he/they will incure serious\n" -"sanctions.\n" -"\n" -"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " -"liable\n" -"for special, indirect or incidental damages whatsoever (including, but not\n" -"limited to loss of profits, business interruption, loss of commercial data " -"and\n" -"other pecuniary losses, and eventual liabilities and indemnification to be " -"paid\n" -"pursuant to a court decision) arising out of use, possession, or the sole\n" -"downloading of these software, to which customer and/or end user could\n" -"eventually have access after having sign up the present agreement.\n" -"\n" -"\n" -"For any queries relating to these agreement, please contact \n" -"Mandrakesoft, Inc.\n" -"2400 N. Lincoln Avenue Suite 243\n" -"Altadena California 91001\n" -"USA" - -#: ../../install_steps_interactive.pm_.c:782 -msgid "Choose a mirror from which to get the packages" -msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi" - -#: ../../install_steps_interactive.pm_.c:793 -msgid "Contacting the mirror to get the list of available packages" -msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa" - -#: ../../install_steps_interactive.pm_.c:796 -msgid "Please choose the packages you want to install." -msgstr "Molimo izaberite pakete koje želite instalirati." - -#: ../../install_steps_interactive.pm_.c:808 -msgid "Which is your timezone?" -msgstr "Koja je vaša vremenska zona?" - -#: ../../install_steps_interactive.pm_.c:813 -msgid "Hardware clock set to GMT" -msgstr "Hardverski sat podešen na GMT" - -#: ../../install_steps_interactive.pm_.c:814 -msgid "Automatic time synchronization (using NTP)" -msgstr "Automatska sinhronizacija vremena (koristeći NTP)" - -#: ../../install_steps_interactive.pm_.c:821 -msgid "NTP Server" -msgstr "NTP server" - -#: ../../install_steps_interactive.pm_.c:855 -#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104 -msgid "Remote CUPS server" -msgstr "Udaljeni CUPS server" - -#: ../../install_steps_interactive.pm_.c:856 -msgid "No printer" -msgstr "Nema štampača" - -#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27 -msgid "Summary" -msgstr "Ukratko" - -#: ../../install_steps_interactive.pm_.c:870 -msgid "Mouse" -msgstr "Miš" - -#: ../../install_steps_interactive.pm_.c:872 -msgid "Timezone" -msgstr "Vremenska zona" - -#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773 -#: ../../printerdrake.pm_.c:1844 -msgid "Printer" -msgstr "Štampač" - -#: ../../install_steps_interactive.pm_.c:875 -msgid "ISDN card" -msgstr "ISDN kartica" - -#: ../../install_steps_interactive.pm_.c:878 -msgid "Sound card" -msgstr "Zvučna kartica" - -#: ../../install_steps_interactive.pm_.c:881 -msgid "TV card" -msgstr "TV kartica" - -#: ../../install_steps_interactive.pm_.c:917 -#: ../../install_steps_interactive.pm_.c:941 -#: ../../install_steps_interactive.pm_.c:945 -msgid "LDAP" -msgstr "LDAP" - -#: ../../install_steps_interactive.pm_.c:918 -#: ../../install_steps_interactive.pm_.c:941 -#: ../../install_steps_interactive.pm_.c:954 -msgid "NIS" -msgstr "NIS" - -#: ../../install_steps_interactive.pm_.c:919 -#: ../../install_steps_interactive.pm_.c:941 -msgid "Local files" -msgstr "Lokalne datoteke" - -#: ../../install_steps_interactive.pm_.c:928 -#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24 -msgid "Set root password" -msgstr "Podesite root šifru" - -#: ../../install_steps_interactive.pm_.c:930 -msgid "No password" -msgstr "Bez šifre" - -#: ../../install_steps_interactive.pm_.c:935 -#, c-format -msgid "This password is too simple (must be at least %d characters long)" -msgstr "" -"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)" - -#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47 -#: ../../standalone/draknet_.c:604 -msgid "Authentication" -msgstr "Autentikacija" - -#: ../../install_steps_interactive.pm_.c:949 -msgid "Authentication LDAP" -msgstr "Autentikacijski LDAP" - -#: ../../install_steps_interactive.pm_.c:950 -msgid "LDAP Base dn" -msgstr "LDAP Base dn" - -#: ../../install_steps_interactive.pm_.c:951 -msgid "LDAP Server" -msgstr "LDAP Server" - -#: ../../install_steps_interactive.pm_.c:957 -msgid "Authentication NIS" -msgstr "Autentifikacija NIS" - -#: ../../install_steps_interactive.pm_.c:958 -msgid "NIS Domain" -msgstr "NIS domen" - -#: ../../install_steps_interactive.pm_.c:959 -msgid "NIS Server" -msgstr "NIS server" - -#: ../../install_steps_interactive.pm_.c:994 -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"SILO on your system, or another operating system removes SILO, or SILO " -"doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures.\n" -"\n" -"If you want to create a bootdisk for your system, insert a floppy in the " -"first\n" -"drive and press \"Ok\"." -msgstr "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"SILO on your system, or another operating system removes SILO, or SILO " -"doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures.\n" -"\n" -"If you want to create a bootdisk for your system, insert a floppy in the " -"first\n" -"drive and press \"Ok\"." - -#: ../../install_steps_interactive.pm_.c:1010 -msgid "First floppy drive" -msgstr "Prva disketna jedinica" - -#: ../../install_steps_interactive.pm_.c:1011 -msgid "Second floppy drive" -msgstr "Druga disketna jedinica" - -#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382 -msgid "Skip" -msgstr "Preskoči" - -#: ../../install_steps_interactive.pm_.c:1017 -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"LILO (or grub) on your system, or another operating system removes LILO, or " -"LILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures. Would you like to create a bootdisk for your system?" -msgstr "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"LILO (or grub) on your system, or another operating system removes LILO, or " -"LILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures. Would you like to create a bootdisk for your system?" - -#: ../../install_steps_interactive.pm_.c:1026 -msgid "Sorry, no floppy drive available" -msgstr "Žao mi je, nema dostupne disketne jedinice" - -#: ../../install_steps_interactive.pm_.c:1030 -msgid "Choose the floppy drive you want to use to make the bootdisk" -msgstr "" -"Izaberite disketnu jedinicu koju želite koristiti da napravite boot disketu" - -#: ../../install_steps_interactive.pm_.c:1034 -#, c-format -msgid "Insert a floppy in drive %s" -msgstr "Ubacite disketu u jedinicu %s" - -#: ../../install_steps_interactive.pm_.c:1037 -msgid "Creating bootdisk" -msgstr "Pravim boot disketu" - -#: ../../install_steps_interactive.pm_.c:1044 -msgid "Preparing bootloader" -msgstr "Pripremam bootloader" - -#: ../../install_steps_interactive.pm_.c:1055 -msgid "" -"You appear to have an OldWorld or Unknown\n" -" machine, the yaboot bootloader will not work for you.\n" -"The install will continue, but you'll\n" -" need to use BootX to boot your machine" -msgstr "" -"Izgleda da imate OldWorld ili Unknown mašinu,\n" -" yaboot bootloader neće raditi kod vas.\n" -"Instalacija će se nastaviti, ali ćete\n" -" morati koristiti BootX za bootanje vaše mašine" - -#: ../../install_steps_interactive.pm_.c:1060 -msgid "Do you want to use aboot?" -msgstr "Da li želite koristiti aboot?" - -#: ../../install_steps_interactive.pm_.c:1063 -msgid "" -"Error installing aboot, \n" -"try to force installation even if that destroys the first partition?" -msgstr "" -"Greška u instaliranju aboota, \n" -"da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?" - -#: ../../install_steps_interactive.pm_.c:1070 -msgid "Installing bootloader" -msgstr "Instaliram bootloadera" - -#: ../../install_steps_interactive.pm_.c:1076 -msgid "Installation of bootloader failed. The following error occured:" -msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:" - -#: ../../install_steps_interactive.pm_.c:1084 -#, c-format -msgid "" -"You may need to change your Open Firmware boot-device to\n" -" enable the bootloader. If you don't see the bootloader prompt at\n" -" reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Then type: shut-down\n" -"At your next boot you should see the bootloader prompt." -msgstr "" -"Možda ćete trebati promjeniti vaš Open Firmware boot uređaj\n" -" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n" -" prilikom bootanja, držite Command-Option-O-F prilikom boota\n" -" i unesite:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Zatim kucajte: shut-down\n" -"Prilikom idućeg boota biste trebali vidjeti upit bootloadera." - -#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23 -msgid "Low" -msgstr "Nizak" - -#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24 -msgid "Medium" -msgstr "Srednji" - -#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25 -msgid "High" -msgstr "Visok" - -#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62 -msgid "Choose security level" -msgstr "Izaberite nivo sigurnosti" - -#: ../../install_steps_interactive.pm_.c:1134 -#: ../../standalone/drakautoinst_.c:80 -#, c-format -msgid "Insert a blank floppy in drive %s" -msgstr "Ubacite praznu disketu u drajv %s" - -#: ../../install_steps_interactive.pm_.c:1138 -#: ../../standalone/drakautoinst_.c:82 -msgid "Creating auto install floppy" -msgstr "Pravim auto instalacijsku disketu" - -#: ../../install_steps_interactive.pm_.c:1149 -msgid "" -"Some steps are not completed.\n" -"\n" -"Do you really want to quit now?" -msgstr "" -"Neki koraci nisu dovršeni.\n" -"\n" -"Da li zaista želite izaći sada?" - -#: ../../install_steps_interactive.pm_.c:1160 -msgid "" -"Congratulations, installation is complete.\n" -"Remove the boot media and press return to reboot.\n" -"\n" -"For information on fixes which are available for this release of Mandrake " -"Linux,\n" -"consult the Errata available from http://www.mandrakelinux.com/.\n" -"\n" -"Information on configuring your system is available in the post\n" -"install chapter of the Official Mandrake Linux User's Guide." -msgstr "" -"Čestitamo, instalacija je završena.\n" -"Uklonite boot medij i pritisnite return za reboot.\n" -"\n" -"Za informacije o ispravkama koje su dostupne za ovu verziju Linux-Mandraka,\n" -"pogledajte Errata koja je dostupna na http://www.linux-mandrake.com/.\n" -"\n" -"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n" -"\"nakon instalacije\" vašeg Zvaničnog Mandrake Linux Priručnika za Upotrebu." - -#: ../../install_steps_interactive.pm_.c:1172 -msgid "Generate auto install floppy" -msgstr "Napravi auto instalacijsku disketu" - -#: ../../install_steps_interactive.pm_.c:1174 -msgid "" -"The auto install can be fully automated if wanted,\n" -"in that case it will take over the hard drive!!\n" -"(this is meant for installing on another box).\n" -"\n" -"You may prefer to replay the installation.\n" -msgstr "" -"Ova auto instalacija može biti potpuno automatizovana ako želite,\n" -"u kojem slučaju će preuzeti hard disk!!\n" -"(ovo je namjenjeno za instaliranje na drugu mašinu).\n" -"\n" -"Možda ćete željeti radije ponoviti instalaciju.\n" - -#: ../../install_steps_interactive.pm_.c:1179 -msgid "Automated" -msgstr "Automatizovano" - -#: ../../install_steps_interactive.pm_.c:1179 -msgid "Replay" -msgstr "Ponovi" - -#: ../../install_steps_interactive.pm_.c:1182 -msgid "Save packages selection" -msgstr "Spasi izbor paketa" - -#: ../../install_steps_newt.pm_.c:22 -#, c-format -msgid "Mandrake Linux Installation %s" -msgstr "Mandrake Linux instalacija %s" - -#: ../../install_steps_newt.pm_.c:34 -msgid "" -" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " -msgstr "" -" <Tab>/<Alt-Tab> između elemenata | <Space> vrši izbor | <F12> idući ekran " - -#: ../../interactive.pm_.c:73 -msgid "kdesu missing" -msgstr "kdesu nedostaje" - -#: ../../interactive.pm_.c:132 -msgid "Choose a file" -msgstr "Izaberi datoteku" - -#: ../../interactive.pm_.c:284 -msgid "Advanced" -msgstr "Napredno" - -#: ../../interactive.pm_.c:345 -msgid "Please wait" -msgstr "Molimo sačekajte" - -#: ../../interactive_gtk.pm_.c:681 -msgid "Expand Tree" -msgstr "Proširi stablo" - -#: ../../interactive_gtk.pm_.c:682 -msgid "Collapse Tree" -msgstr "Smanji stablo" - -#: ../../interactive_gtk.pm_.c:683 -msgid "Toggle between flat and group sorted" -msgstr "Prekidač između ravnog i grupnog sortiranja" - -#: ../../interactive_stdio.pm_.c:35 -#, c-format -msgid "Ambiguity (%s), be more precise\n" -msgstr "Ambiguity (%s), budite precizniji\n" - -#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 -#: ../../interactive_stdio.pm_.c:71 -msgid "Bad choice, try again\n" -msgstr "Pogrešan izbor, pokušajte ponovo\n" - -#: ../../interactive_stdio.pm_.c:39 -#, c-format -msgid " ? (default %s) " -msgstr " ? (podrazumjevano %s)" - -#: ../../interactive_stdio.pm_.c:52 -#, c-format -msgid "Your choice? (default %s) " -msgstr "Vaš izbor? (podrazumjevano %s)" - -#: ../../interactive_stdio.pm_.c:72 -#, c-format -msgid "Your choice? (default %s enter `none' for none) " -msgstr "Vaš izbor? (podrazumjevano %s unesite `none' za ništa)" - -#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178 -msgid "Czech (QWERTZ)" -msgstr "Češka (QWERTZ)" - -#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180 -msgid "German" -msgstr "Njemačka" - -#: ../../keyboard.pm_.c:142 -msgid "Dvorak" -msgstr "Dvorak" - -#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186 -msgid "Spanish" -msgstr "Španska" - -#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187 -msgid "Finnish" -msgstr "Finska" - -#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188 -msgid "French" -msgstr "Francuska" - -#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211 -msgid "Norwegian" -msgstr "Norveška" - -#: ../../keyboard.pm_.c:147 -msgid "Polish" -msgstr "Poljska" - -#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219 -msgid "Russian" -msgstr "Ruska" - -#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221 -msgid "Swedish" -msgstr "Švedska" - -#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236 -msgid "UK keyboard" -msgstr "UK tastatura" - -#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237 -msgid "US keyboard" -msgstr "US tastatura" - -#: ../../keyboard.pm_.c:159 -msgid "Albanian" -msgstr "Albanska" - -#: ../../keyboard.pm_.c:160 -msgid "Armenian (old)" -msgstr "Armenska (stara)" - -#: ../../keyboard.pm_.c:161 -msgid "Armenian (typewriter)" -msgstr "Armenska (pisaća mašina)" - -#: ../../keyboard.pm_.c:162 -msgid "Armenian (phonetic)" -msgstr "Armenska (fonetska)" - -#: ../../keyboard.pm_.c:167 -msgid "Azerbaidjani (latin)" -msgstr "Azerbejdžanska (latinica)" - -#: ../../keyboard.pm_.c:169 -msgid "Belgian" -msgstr "Belgijska" - -#: ../../keyboard.pm_.c:170 -msgid "Bulgarian" -msgstr "Bugarska" - -#: ../../keyboard.pm_.c:171 -msgid "Brazilian (ABNT-2)" -msgstr "Brazilska (ABNT-2)" - -#: ../../keyboard.pm_.c:172 -msgid "Belarusian" -msgstr "Bjeloruska" - -#: ../../keyboard.pm_.c:173 -msgid "Swiss (German layout)" -msgstr "Švicarska (Njemački izgled)" - -#: ../../keyboard.pm_.c:174 -msgid "Swiss (French layout)" -msgstr "Švicarska (Francuski izgled)" - -#: ../../keyboard.pm_.c:179 -msgid "Czech (QWERTY)" -msgstr "Češka (QWERTY)" - -#: ../../keyboard.pm_.c:181 -msgid "German (no dead keys)" -msgstr "Njemačka (bez mrtvih tipki)" - -#: ../../keyboard.pm_.c:182 -msgid "Danish" -msgstr "Danska" - -#: ../../keyboard.pm_.c:183 -msgid "Dvorak (US)" -msgstr "Dvorak (US)" - -#: ../../keyboard.pm_.c:184 -msgid "Dvorak (Norwegian)" -msgstr "Dvorak (Norveška)" - -#: ../../keyboard.pm_.c:185 -msgid "Estonian" -msgstr "Estonska" - -#: ../../keyboard.pm_.c:189 -msgid "Georgian (\"Russian\" layout)" -msgstr "Gruzijska (\"Ruski\" izgled)" - -#: ../../keyboard.pm_.c:190 -msgid "Georgian (\"Latin\" layout)" -msgstr "Gruzijska (\"Latinični\" izgled)" - -#: ../../keyboard.pm_.c:191 -msgid "Greek" -msgstr "Grčka" - -#: ../../keyboard.pm_.c:192 -msgid "Hungarian" -msgstr "Mađarska" - -#: ../../keyboard.pm_.c:193 -msgid "Croatian" -msgstr "Hrvatska" - -#: ../../keyboard.pm_.c:194 -msgid "Israeli" -msgstr "Izraelska" - -#: ../../keyboard.pm_.c:195 -msgid "Israeli (Phonetic)" -msgstr "Izraelska (Fonetska)" - -#: ../../keyboard.pm_.c:196 -msgid "Iranian" -msgstr "Iranska" - -#: ../../keyboard.pm_.c:197 -msgid "Icelandic" -msgstr "Islandska" - -#: ../../keyboard.pm_.c:198 -msgid "Italian" -msgstr "Italijanska" - -#: ../../keyboard.pm_.c:200 -msgid "Japanese 106 keys" -msgstr "Japanska 106 tipki" - -#: ../../keyboard.pm_.c:201 -msgid "Korean keyboard" -msgstr "Korejanska tastatura" - -#: ../../keyboard.pm_.c:202 -msgid "Latin American" -msgstr "Latino-Američka" - -#: ../../keyboard.pm_.c:203 -msgid "Lithuanian AZERTY (old)" -msgstr "Litvanska AZERTY (stara)" - -#: ../../keyboard.pm_.c:205 -msgid "Lithuanian AZERTY (new)" -msgstr "Litvanska AYERTY (nova)" - -#: ../../keyboard.pm_.c:206 -msgid "Lithuanian \"number row\" QWERTY" -msgstr "Litvanska \"red brojeva\" QWERTY" - -#: ../../keyboard.pm_.c:207 -msgid "Lithuanian \"phonetic\" QWERTY" -msgstr "Litvanska \"fonetska\" QWERTY" - -#: ../../keyboard.pm_.c:208 -msgid "Latvian" -msgstr "Latvijska" - -#: ../../keyboard.pm_.c:209 -msgid "Macedonian" -msgstr "Makedonska" - -#: ../../keyboard.pm_.c:210 -msgid "Dutch" -msgstr "Holandska" - -#: ../../keyboard.pm_.c:212 -msgid "Polish (qwerty layout)" -msgstr "Poljska (qwerty)" - -#: ../../keyboard.pm_.c:213 -msgid "Polish (qwertz layout)" -msgstr "Poljska (qwertz)" - -#: ../../keyboard.pm_.c:214 -msgid "Portuguese" -msgstr "Portugalska" - -#: ../../keyboard.pm_.c:215 -msgid "Canadian (Quebec)" -msgstr "Kanadska (Kvebek)" - -#: ../../keyboard.pm_.c:217 -msgid "Romanian (qwertz)" -msgstr "Rumunska (qwertz)" - -#: ../../keyboard.pm_.c:218 -msgid "Romanian (qwerty)" -msgstr "Rumunska (qwerty)" - -#: ../../keyboard.pm_.c:220 -msgid "Russian (Yawerty)" -msgstr "Ruska (Yawerty)" - -#: ../../keyboard.pm_.c:222 -msgid "Slovenian" -msgstr "Slovenačka" - -#: ../../keyboard.pm_.c:226 -msgid "Slovakian (QWERTZ)" -msgstr "Slovačka (QWERTZ)" - -#: ../../keyboard.pm_.c:227 -msgid "Slovakian (QWERTY)" -msgstr "Slovačka (QWERTY)" - -#: ../../keyboard.pm_.c:229 -msgid "Serbian (cyrillic)" -msgstr "Srpska (ćirilica)" - -#: ../../keyboard.pm_.c:230 -msgid "Thai keyboard" -msgstr "Tajlandska tastatura" - -#: ../../keyboard.pm_.c:232 -msgid "Tajik keyboard" -msgstr "Tadžička tastatura" - -#: ../../keyboard.pm_.c:233 -msgid "Turkish (traditional \"F\" model)" -msgstr "Turska (tradicionalni \"F\" model)" - -#: ../../keyboard.pm_.c:234 -msgid "Turkish (modern \"Q\" model)" -msgstr "Turska (moderni \"Q\" model)" - -#: ../../keyboard.pm_.c:235 -msgid "Ukrainian" -msgstr "Ukrajinska" - -#: ../../keyboard.pm_.c:238 -msgid "US keyboard (international)" -msgstr "US tastatura (međunarodna)" - -#: ../../keyboard.pm_.c:239 -msgid "Vietnamese \"numeric row\" QWERTY" -msgstr "Vjetnamska \"red brojeva\" QWERTY" - -#: ../../keyboard.pm_.c:240 -msgid "Yugoslavian (latin)" -msgstr "Jugoslavenska (latinično)" - -#: ../../loopback.pm_.c:32 -#, c-format -msgid "Circular mounts %s\n" -msgstr "Kružno montiranje %s\n" - -#: ../../lvm.pm_.c:83 -msgid "Remove the logical volumes first\n" -msgstr "Najprije ukloni logičke volumene\n" - -#: ../../mouse.pm_.c:25 -msgid "Sun - Mouse" -msgstr "Sun - Mouse" - -#: ../../mouse.pm_.c:31 -msgid "Standard" -msgstr "Standard" - -#: ../../mouse.pm_.c:32 -msgid "Logitech MouseMan+" -msgstr "Logitech MouseMan+" - -#: ../../mouse.pm_.c:33 -msgid "Generic PS2 Wheel Mouse" -msgstr "Opšti PS2 Miš sa kotačem" - -#: ../../mouse.pm_.c:34 -msgid "GlidePoint" -msgstr "GlidePoint" - -#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62 -msgid "Kensington Thinking Mouse" -msgstr "Kensington Thinking Mouse" - -#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58 -msgid "Genius NetMouse" -msgstr "Genius NetMouse" - -#: ../../mouse.pm_.c:38 -msgid "Genius NetScroll" -msgstr "Genius NetScroll" - -#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67 -msgid "1 button" -msgstr "1 dugme" - -#: ../../mouse.pm_.c:44 -msgid "Generic" -msgstr "Opšti" - -#: ../../mouse.pm_.c:45 -msgid "Wheel" -msgstr "Kotač" - -#: ../../mouse.pm_.c:48 -msgid "serial" -msgstr "serijski" - -#: ../../mouse.pm_.c:50 -msgid "Generic 2 Button Mouse" -msgstr "Opšti miš sa 2 dugmeta" - -#: ../../mouse.pm_.c:51 -msgid "Generic 3 Button Mouse" -msgstr "Opšti miš sa 3 dugmeta" - -#: ../../mouse.pm_.c:52 -msgid "Microsoft IntelliMouse" -msgstr "Microsoft IntelliMouse" - -#: ../../mouse.pm_.c:53 -msgid "Logitech MouseMan" -msgstr "Logitech MouseMan" - -#: ../../mouse.pm_.c:54 -msgid "Mouse Systems" -msgstr "Mouse Systems" - -#: ../../mouse.pm_.c:56 -msgid "Logitech CC Series" -msgstr "Logitech CC Series" - -#: ../../mouse.pm_.c:57 -msgid "Logitech MouseMan+/FirstMouse+" -msgstr "Logitech MouseMan+/FirstMouse+" - -#: ../../mouse.pm_.c:59 -msgid "MM Series" -msgstr "MM Series" - -#: ../../mouse.pm_.c:60 -msgid "MM HitTablet" -msgstr "MM HitTablet" - -#: ../../mouse.pm_.c:61 -msgid "Logitech Mouse (serial, old C7 type)" -msgstr "Logitech Mouse (serijski, stari C7 tip)" - -#: ../../mouse.pm_.c:65 -msgid "busmouse" -msgstr "busmouse" - -#: ../../mouse.pm_.c:68 -msgid "2 buttons" -msgstr "2 dugmeta" - -#: ../../mouse.pm_.c:69 -msgid "3 buttons" -msgstr "3 dugmeta" - -#: ../../mouse.pm_.c:72 -msgid "none" -msgstr "nijedan" - -#: ../../mouse.pm_.c:74 -msgid "No mouse" -msgstr "Bez miša" - -#: ../../mouse.pm_.c:482 -msgid "Please test the mouse" -msgstr "Molimo testirajte miš" - -#: ../../mouse.pm_.c:483 -msgid "To activate the mouse," -msgstr "Da biste aktivirali miša," - -#: ../../mouse.pm_.c:484 -msgid "MOVE YOUR WHEEL!" -msgstr "POMJERITE VAŠ KOTAČ!" - -#: ../../my_gtk.pm_.c:380 -msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*" - -#: ../../my_gtk.pm_.c:415 -msgid "Finish" -msgstr "Kraj" - -#: ../../my_gtk.pm_.c:415 -msgid "Next ->" -msgstr "Sljedeći ->" - -#: ../../my_gtk.pm_.c:416 -msgid "<- Previous" -msgstr "<- Prethodni" - -#: ../../my_gtk.pm_.c:716 -msgid "Is this correct?" -msgstr "Da li je ovo ispravno?" - -#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 -msgid "Connect to the Internet" -msgstr "Spoji se na Internet" - -#: ../../network/adsl.pm_.c:20 -msgid "" -"The most common way to connect with adsl is pppoe.\n" -"Some connections use pptp, a few ones use dhcp.\n" -"If you don't know, choose 'use pppoe'" -msgstr "" -"Najčešći način za konekciju sa adsl-om je pppoe.\n" -"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n" -"Ako ne znate, izaberite 'koristi pppoe'" - -#: ../../network/adsl.pm_.c:22 -msgid "Alcatel speedtouch usb" -msgstr "Alcatel speedtouch usb" - -#: ../../network/adsl.pm_.c:22 -msgid "use dhcp" -msgstr "koristi dhcp" - -#: ../../network/adsl.pm_.c:22 -msgid "use pppoe" -msgstr "koristi pppoe" - -#: ../../network/adsl.pm_.c:22 -msgid "use pptp" -msgstr "koristi pptp" - -#: ../../network/ethernet.pm_.c:37 -msgid "" -"Which dhcp client do you want to use?\n" -"Default is dhcpcd" -msgstr "" -"Koji dhcp klijent želite koristiti?\n" -"Podrazumjevani je dhcpcd" - -#: ../../network/ethernet.pm_.c:88 -msgid "" -"No ethernet network adapter has been detected on your system.\n" -"I cannot set up this connection type." -msgstr "" -"Nije pronađen ethernet mrežni adapter na vašem sistemu.\n" -"Ne mogu podesiti ovu vrstu konekcije." - -#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233 -msgid "Choose the network interface" -msgstr "Izaberite mrežni interface" - -#: ../../network/ethernet.pm_.c:93 -msgid "" -"Please choose which network adapter you want to use to connect to Internet" -msgstr "" -"Molimo izaberite koji mrežni adapter želite koristiti za spajanje na Internet" - -#: ../../network/ethernet.pm_.c:178 -msgid "no network card found" -msgstr "nije pronađena mrežna kartica" - -#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350 -msgid "Configuring network" -msgstr "Podešavam mrežu" - -#: ../../network/ethernet.pm_.c:203 -msgid "" -"Please enter your host name if you know it.\n" -"Some DHCP servers require the hostname to work.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''." -msgstr "" -"Molimo unesite naziv vašeg računara ako ga znate.\n" -"Neki DHCP serveri traže hostname kako bi radili.\n" -"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n" -"kao što je ``mojcomp.mojlab.mojafirma.com''." - -#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355 -msgid "Host name" -msgstr "Host name" - -#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 -#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105 -#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164 -#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213 -#: ../../network/netconnect.pm_.c:221 -msgid "Network Configuration Wizard" -msgstr "Čarobnjak za podešavanje mreže" - -#: ../../network/isdn.pm_.c:22 -msgid "External ISDN modem" -msgstr "Vanjski ISDN modem" - -#: ../../network/isdn.pm_.c:22 -msgid "Internal ISDN card" -msgstr "Interna ISDN kartica" - -#: ../../network/isdn.pm_.c:22 -msgid "What kind is your ISDN connection?" -msgstr "Koje je vrste vaša ISDN konekcija?" - -#: ../../network/isdn.pm_.c:45 -msgid "" -"Which ISDN configuration do you prefer?\n" -"\n" -"* The Old configuration uses isdn4net. It contains powerfull\n" -" tools, but is tricky to configure, and not standard.\n" -"\n" -"* The New configuration is easier to understand, more\n" -" standard, but with less tools.\n" -"\n" -"We recommand the light configuration.\n" -msgstr "" -"Koju ISDN konfiguraciju želite?\n" -"\n" -"* Stara konfiguracija koristi isdn4net. On sadrži moćne alate,\n" -" ali ga je teško podesiti i nije standardiziran.\n" -"\n" -"* Novu konfiguraciju je lakše razumjeti, standardnija je,\n" -" ali ima manje alata.\n" -"\n" -"Preporučujemo light konfiguraciju.\n" - -#: ../../network/isdn.pm_.c:54 -msgid "New configuration (isdn-light)" -msgstr "Nova konfiguracija (isdn-light)" - -#: ../../network/isdn.pm_.c:54 -msgid "Old configuration (isdn4net)" -msgstr "Stara konfiguracija (isdn4net)" - -#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187 -#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204 -#: ../../network/isdn.pm_.c:214 -msgid "ISDN Configuration" -msgstr "Podešavanje ISDNa" - -#: ../../network/isdn.pm_.c:169 -msgid "" -"Select your provider.\n" -" If it's not in the list, choose Unlisted" -msgstr "" -"Izaberite vašeg providera.\n" -" Ako nije na listi, izaberite Nije na listi" - -#: ../../network/isdn.pm_.c:182 -msgid "Europe protocol" -msgstr "Evropski protokol" - -#: ../../network/isdn.pm_.c:182 -msgid "Europe protocol (EDSS1)" -msgstr "Evropski protokol (EDSS1)" - -#: ../../network/isdn.pm_.c:184 -msgid "Protocol for the rest of the world" -msgstr "Protokol za ostatak svijeta" - -#: ../../network/isdn.pm_.c:184 -msgid "" -"Protocol for the rest of the world \n" -" no D-Channel (leased lines)" -msgstr "" -"Protokol za ostatak svijeta \n" -" bez D-kanala (iznajmljene linije)" - -#: ../../network/isdn.pm_.c:188 -msgid "Which protocol do you want to use ?" -msgstr "Koji protokol želite koristiti?" - -#: ../../network/isdn.pm_.c:198 -msgid "What kind of card do you have?" -msgstr "Koju vrstu kartice imate?" - -#: ../../network/isdn.pm_.c:199 -msgid "I don't know" -msgstr "Ne znam" - -#: ../../network/isdn.pm_.c:199 -msgid "ISA / PCMCIA" -msgstr "ISA / PCMCIA" - -#: ../../network/isdn.pm_.c:199 -msgid "PCI" -msgstr "PCI" - -#: ../../network/isdn.pm_.c:205 -msgid "" -"\n" -"If you have an ISA card, the values on the next screen should be right.\n" -"\n" -"If you have a PCMCIA card, you have to know the irq and io of your card.\n" -msgstr "" -"\n" -"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti " -"ispravne.\n" -"\n" -"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n" - -#: ../../network/isdn.pm_.c:209 -msgid "Abort" -msgstr "Prekid" - -#: ../../network/isdn.pm_.c:209 -msgid "Continue" -msgstr "Nastavak" - -#: ../../network/isdn.pm_.c:215 -msgid "Which is your ISDN card ?" -msgstr "Koja je vaša ISDN kartica ?" - -#: ../../network/isdn.pm_.c:234 -msgid "" -"I have detected an ISDN PCI Card, but I don't know the type. Please select " -"one PCI card on the next screen." -msgstr "" -"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI " -"karticu na idućem ekranu." - -#: ../../network/isdn.pm_.c:243 -msgid "No ISDN PCI card found. Please select one on the next screen." -msgstr "" -"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem " -"ekranu." - -#: ../../network/modem.pm_.c:37 -msgid "Please choose which serial port your modem is connected to." -msgstr "Molimo izaberite na koji serijski port je nakačen vaš modem." - -#: ../../network/modem.pm_.c:42 -msgid "Dialup options" -msgstr "Opcije dialupa" - -#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600 -msgid "Connection name" -msgstr "Naziv konekcije" - -#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601 -msgid "Phone number" -msgstr "Broj telefona" - -#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602 -msgid "Login ID" -msgstr "Login ID" - -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604 -msgid "CHAP" -msgstr "CHAP" - -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604 -msgid "PAP" -msgstr "PAP" - -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604 -msgid "Script-based" -msgstr "Skripta" - -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604 -msgid "Terminal-based" -msgstr "Terminal" - -#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605 -msgid "Domain name" -msgstr "Ime domena" - -#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606 -msgid "First DNS Server (optional)" -msgstr "Prvi DNS server (opcionalno)" - -#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607 -msgid "Second DNS Server (optional)" -msgstr "Drugi DNS server (opcionalno)" - -#: ../../network/netconnect.pm_.c:33 -msgid "" -"\n" -"You can disconnect or reconfigure your connection." -msgstr "" -"\n" -"Možete se diskonektovati ili prekonfigurisati vašu konekciju." - -#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36 -msgid "" -"\n" -"You can reconfigure your connection." -msgstr "" -"\n" -"Možete prekonfigurisati vašu konekciju." - -#: ../../network/netconnect.pm_.c:33 -msgid "You are currently connected to internet." -msgstr "Trenutno ste spojeni na Internet." - -#: ../../network/netconnect.pm_.c:36 -msgid "" -"\n" -"You can connect to Internet or reconfigure your connection." -msgstr "" -"\n" -"Možete se spojiti na Internet ili prekonfigurisati vašu konekciju." - -#: ../../network/netconnect.pm_.c:36 -msgid "You are not currently connected to Internet." -msgstr "Trenutno niste konektovani na Internet." - -#: ../../network/netconnect.pm_.c:40 -msgid "Connect to Internet" -msgstr "Spoji se na Internet" - -#: ../../network/netconnect.pm_.c:42 -msgid "Disconnect from Internet" -msgstr "Odspoji se sa Interneta" - -#: ../../network/netconnect.pm_.c:44 -msgid "Configure network connection (LAN or Internet)" -msgstr "Podesi mrežnu konekciju (LAN ili Internet)" - -#: ../../network/netconnect.pm_.c:47 -msgid "Internet connection & configuration" -msgstr "Internet konekcija & podešavanje" - -#: ../../network/netconnect.pm_.c:96 -#, c-format -msgid "We are now going to configure the %s connection." -msgstr "Sada ćemo podesiti konekciju %s." - -#: ../../network/netconnect.pm_.c:105 -#, c-format -msgid "" -"\n" -"\n" -"\n" -"We are now going to configure the %s connection.\n" -"\n" -"\n" -"Press OK to continue." -msgstr "" -"\n" -"\n" -"\n" -"Sada ćemo podesiti konekciju %s.\n" -"\n" -"\n" -"Pritisnite OK za nastavak." - -#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243 -#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56 -msgid "Network Configuration" -msgstr "Podešavanje mreže" - -#: ../../network/netconnect.pm_.c:130 -msgid "" -"Because you are doing a network installation, your network is already " -"configured.\n" -"Click on Ok to keep your configuration, or cancel to reconfigure your " -"Internet & Network connection.\n" -msgstr "" -"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n" -"Kliknite na Ok da zadržite tu konfiguraciju ili Odustani za podešavanje vaše " -"Internet & Mrežne konekcije.\n" - -#: ../../network/netconnect.pm_.c:155 -msgid "" -"Welcome to The Network Configuration Wizard\n" -"\n" -"We are about to configure your internet/network connection.\n" -"If you don't want to use the auto detection, deselect the checkbox.\n" -msgstr "" -"Dobro došli u Čarobnjak za podešavanje mreže\n" -"\n" -"Sada ćemo podesiti vašu internet/mrežnu konekciju.\n" -"Ako ne želite da koristite automatsko prepoznavanje, isključite opciju.\n" - -#: ../../network/netconnect.pm_.c:157 -msgid "Choose the profile to configure" -msgstr "Izaberite profil za podešavanje" - -#: ../../network/netconnect.pm_.c:158 -msgid "Use auto detection" -msgstr "Koristi auto prepoznavanje" - -#: ../../network/netconnect.pm_.c:164 -msgid "Detecting devices..." -msgstr "Prepoznajem uređaje..." - -#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184 -msgid "Normal modem connection" -msgstr "Normalna modemska konekcija" - -#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184 -#, c-format -msgid "detected on port %s" -msgstr "detektovan na portu %s" - -#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185 -msgid "ISDN connection" -msgstr "ISDN konekcija" - -#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185 -#, c-format -msgid "detected %s" -msgstr "detektovan %s" - -#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186 -msgid "ADSL connection" -msgstr "ADSL konekcija" - -#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186 -#, c-format -msgid "detected on interface %s" -msgstr "detektovan na interfejsu %s" - -#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187 -msgid "Cable connection" -msgstr "Kablovska konekcija" - -#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187 -msgid "cable connection detected" -msgstr "otkrivena kablovska konekcija" - -#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188 -msgid "LAN connection" -msgstr "LAN konekcija" - -#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188 -msgid "ethernet card(s) detected" -msgstr "prepoznata ethernet kartica(e)" - -#: ../../network/netconnect.pm_.c:190 -msgid "Choose the connection you want to configure" -msgstr "Izaberite konekciju koju želite podesiti" - -#: ../../network/netconnect.pm_.c:214 -msgid "" -"You have configured multiple ways to connect to the Internet.\n" -"Choose the one you want to use.\n" -"\n" -msgstr "" -"Podesili ste nekoliko načina za konekciju na Internet.\n" -"Izaberite jedan od njih koji ćete koristiti.\n" -"\n" - -#: ../../network/netconnect.pm_.c:215 -msgid "Internet connection" -msgstr "Internet konekcija" - -#: ../../network/netconnect.pm_.c:221 -msgid "Do you want to start the connection at boot?" -msgstr "Da li želite pokrenuti konekciju prilikom boota?" - -#: ../../network/netconnect.pm_.c:239 -msgid "Network configuration" -msgstr "Podešavanje mreže" - -#: ../../network/netconnect.pm_.c:240 -msgid "The network needs to be restarted" -msgstr "Potrebno je restartovati mrežu" - -#: ../../network/netconnect.pm_.c:243 -#, c-format -msgid "" -"A problem occured while restarting the network: \n" -"\n" -"%s" -msgstr "" -"Došlo je do problema prilikom restartovanja mreže:\n" -"\n" -"%s" - -#: ../../network/netconnect.pm_.c:247 -msgid "" -"Congratulations, the network and internet configuration is finished.\n" -"\n" -"The configuration will now be applied to your system.\n" -msgstr "" -"Čestitamo, podešavanje mreže i interneta je završeno.\n" -"\n" -"Sada će ova konfiguracija biti primjenjena na vaš sistem.\n" - -#: ../../network/netconnect.pm_.c:250 -msgid "" -"After that is done, we recommend you to restart your X\n" -"environnement to avoid hostname changing problem." -msgstr "" -"Nakon što je to gotovo, preporučujemo da restartujete vaš X\n" -"okoliš kako bi se izbjegao problem sa promjenom naziva mašine." - -#: ../../network/network.pm_.c:283 -msgid "" -"WARNING: This device has been previously configured to connect to the " -"Internet.\n" -"Simply accept to keep this device configured.\n" -"Modifying the fields below will override this configuration." -msgstr "" -"UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n" -"Samo prihvatite kako bi ovaj uređaj ostao podešen.\n" -"Izmjena polja ispod će prepisati ovu konfiguraciju." - -#: ../../network/network.pm_.c:288 -msgid "" -"Please enter the IP configuration for this machine.\n" -"Each item should be entered as an IP address in dotted-decimal\n" -"notation (for example, 1.2.3.4)." -msgstr "" -"Molimo unesite IP konfiguraciju za ovu mašinu.\n" -"Svaka stavka bi trebala bitii unesena kao IP adresa u decimalnoj notaciji\n" -"razdvojenoj tačkama (npr. 1.2.3.4)." - -#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298 -#, c-format -msgid "Configuring network device %s" -msgstr "Podešavam mrežni uređaj %s" - -#: ../../network/network.pm_.c:298 -#, c-format -msgid " (driver %s)" -msgstr " (drajver %s)" - -#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255 -#: ../../standalone/draknet_.c:461 -msgid "IP address" -msgstr "IP adresa" - -#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462 -msgid "Netmask" -msgstr "Netmask" - -#: ../../network/network.pm_.c:302 -msgid "(bootp/dhcp)" -msgstr "(bootp/dhcp)" - -#: ../../network/network.pm_.c:302 -msgid "Automatic IP" -msgstr "Automatska IP" - -#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406 -msgid "IP address should be in format 1.2.3.4" -msgstr "IP adresa treba biti u formatu 1.2.3.4" - -#: ../../network/network.pm_.c:351 -msgid "" -"Please enter your host name.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''.\n" -"You may also enter the IP address of the gateway if you have one" -msgstr "" -"Molimo unesite naziv vašeg računara ako ga znate.\n" -"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n" -"kao što je ``mojcomp.mojlab.mojafirma.com''.\n" -"Možete također unijeti IP adresu gateway-a ako ga imate" - -#: ../../network/network.pm_.c:356 -msgid "DNS server" -msgstr "DNS server" - -#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599 -msgid "Gateway" -msgstr "Gateway" - -#: ../../network/network.pm_.c:359 -msgid "Gateway device" -msgstr "Gateway uređaj" - -#: ../../network/network.pm_.c:371 -msgid "Proxies configuration" -msgstr "Konfiguracija proxija" - -#: ../../network/network.pm_.c:372 -msgid "HTTP proxy" -msgstr "HTTP proxy" - -#: ../../network/network.pm_.c:373 -msgid "FTP proxy" -msgstr "FTP proxy" - -#: ../../network/network.pm_.c:374 -msgid "Track network card id (usefull for laptops)" -msgstr "Otkrij id mrežne karte (korisno za laptope)" - -#: ../../network/network.pm_.c:377 -msgid "Proxy should be http://..." -msgstr "Proxy treba biti http://..." - -#: ../../network/network.pm_.c:378 -msgid "Proxy should be ftp://..." -msgstr "Proxy treba biti ftp://..." - -#: ../../network/tools.pm_.c:38 -msgid "Internet configuration" -msgstr "Internet konfiguracija" - -#: ../../network/tools.pm_.c:39 -msgid "Do you want to try to connect to the Internet now?" -msgstr "Da li se želite pokušati spojiti na Internet sada?" - -#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189 -msgid "Testing your connection..." -msgstr "Probavam vašu konekciju..." - -#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220 -msgid "The system is now connected to Internet." -msgstr "Sistem je sada spojen na Internet." - -#: ../../network/tools.pm_.c:50 -msgid "For Security reason, it will be disconnected now." -msgstr "Iz sigurnosnih razloga, sada će biti odspojen." - -#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220 -msgid "" -"The system doesn't seem to be connected to internet.\n" -"Try to reconfigure your connection." -msgstr "" -"Izgleda da sistem nije spojen na Internet.\n" -"Probajte promjeniti postavke vaše konekcije." - -#: ../../network/tools.pm_.c:75 -msgid "Connection Configuration" -msgstr "Podešavanje konekcije" - -#: ../../network/tools.pm_.c:76 -msgid "Please fill or check the field below" -msgstr "Molimo ispunite ili provjerite polje ispod" - -#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586 -msgid "Card IRQ" -msgstr "IRQ kartice" - -#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587 -msgid "Card mem (DMA)" -msgstr "Memorija kartice (DMA)" - -#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588 -msgid "Card IO" -msgstr "IO kartice" - -#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589 -msgid "Card IO_0" -msgstr "IO_0 kartice" - -#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590 -msgid "Card IO_1" -msgstr "IO_1 kartice" - -#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591 -msgid "Your personal phone number" -msgstr "Vaš lični broj telefona" - -#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592 -msgid "Provider name (ex provider.net)" -msgstr "Naziv provajdera (npr. provajder.net)" - -#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593 -msgid "Provider phone number" -msgstr "Broj telefona provajdera" - -#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594 -msgid "Provider dns 1 (optional)" -msgstr "Provider dns 1 (opcionalno)" - -#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595 -msgid "Provider dns 2 (optional)" -msgstr "Provider dns 2 (opcionalno)" - -#: ../../network/tools.pm_.c:88 -msgid "Choose your country" -msgstr "Izaberite vašu državu" - -#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598 -msgid "Dialing mode" -msgstr "Način biranja broja" - -#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610 -msgid "Connection speed" -msgstr "Brzina konekcije" - -#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611 -msgid "Connection timeout (in sec)" -msgstr "Timeout konekcije (u sek.)" - -#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596 -msgid "Account Login (user name)" -msgstr "Login naloga (korisničko ime)" - -#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597 -msgid "Account Password" -msgstr "Šifra naloga" - -#: ../../partition_table.pm_.c:622 -msgid "Extended partition not supported on this platform" -msgstr "Extended particije nisu podržane na ovoj platformi" - -#: ../../partition_table.pm_.c:640 -msgid "" -"You have a hole in your partition table but I can't use it.\n" -"The only solution is to move your primary partitions to have the hole next " -"to the extended partitions" -msgstr "" -"Imate rupu u vašoj tabeli particija li je ja ne mogu upotrijebiti.\n" -"Jedino rješenje je da pomjerite vaše primarne particija kako bi rupa bila " -"pored extended particija" - -#: ../../partition_table.pm_.c:744 -#, c-format -msgid "Restoring from file %s failed: %s" -msgstr "Povratak iz datoteke %s nije uspio: %s" - -#: ../../partition_table.pm_.c:746 -msgid "Bad backup file" -msgstr "Loša backup datoteka" - -#: ../../partition_table.pm_.c:768 -#, c-format -msgid "Error writing to file %s" -msgstr "Greška u pisanju datoteke: %s" - -#: ../../partition_table_raw.pm_.c:154 -msgid "" -"Something bad is happening on your drive. \n" -"A test to check the integrity of data has failed. \n" -"It means writing anything on the disk will end up with random trash" -msgstr "" -"Nešto loše se dešava na vašem disku. \n" -"Test integriteta podataka nije uspio. \n" -"To znači će da pisanje bilo čeka na disk rezultirati smećem" - -#: ../../pkgs.pm_.c:24 -msgid "must have" -msgstr "obavezno" - -#: ../../pkgs.pm_.c:25 -msgid "important" -msgstr "važno" - -#: ../../pkgs.pm_.c:26 -msgid "very nice" -msgstr "vrlo fino" - -#: ../../pkgs.pm_.c:27 -msgid "nice" -msgstr "fino" - -#: ../../pkgs.pm_.c:28 -msgid "maybe" -msgstr "možda" - -#: ../../printer.pm_.c:23 -msgid "CUPS - Common Unix Printing System" -msgstr "CUPS - Common Unix Printing System" - -#: ../../printer.pm_.c:24 -msgid "LPRng - LPR New Generation" -msgstr "LPRng - LPR New Generation" - -#: ../../printer.pm_.c:25 -msgid "LPD - Line Printer Daemon" -msgstr "LPD - Line Printer Daemon" - -#: ../../printer.pm_.c:26 -msgid "PDQ - Print, Don't Queue" -msgstr "PDQ - Print, Don't Queue" - -#: ../../printer.pm_.c:32 -msgid "CUPS" -msgstr "CUPS" - -#: ../../printer.pm_.c:33 -msgid "LPRng" -msgstr "LPRng" - -#: ../../printer.pm_.c:34 -msgid "LPD" -msgstr "LPD" - -#: ../../printer.pm_.c:35 -msgid "PDQ" -msgstr "PDQ" - -#: ../../printer.pm_.c:40 -msgid "Local printer" -msgstr "Lokalni štampač" - -#: ../../printer.pm_.c:41 -msgid "Remote printer" -msgstr "Udaljeni štampač" - -#: ../../printer.pm_.c:42 -msgid "Printer on remote CUPS server" -msgstr "Štampač na udaljenom CUPS serveru" - -#: ../../printer.pm_.c:43 -msgid "Printer on remote lpd server" -msgstr "Štampač na udaljenom lpd serveru" - -#: ../../printer.pm_.c:44 -msgid "Network printer (socket)" -msgstr "Mrežni štampač (socket)" - -#: ../../printer.pm_.c:45 -msgid "Printer on SMB/Windows 95/98/NT server" -msgstr "Štampač na SMB/Windows 95/98/NT serveru" - -#: ../../printer.pm_.c:46 -msgid "Printer on NetWare server" -msgstr "Štampač na NetWare serveru" - -#: ../../printer.pm_.c:47 -msgid "Enter a printer device URI" -msgstr "Unesite URI uređaja štampača" - -#: ../../printer.pm_.c:48 -msgid "Pipe job into a command" -msgstr "Spoji zadatak na komandu" - -#: ../../printer.pm_.c:418 ../../printer.pm_.c:839 -#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023 -msgid "Unknown model" -msgstr "Nepoznat model" - -#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790 -msgid "Raw printer (No driver)" -msgstr "Sirovo štampanje (Bez drajvera)" - -#: ../../printer.pm_.c:693 -#, c-format -msgid "(on %s)" -msgstr "(na %s)" - -#: ../../printer.pm_.c:695 -msgid "(on this machine)" -msgstr "(na ovoj mašini)" - -#: ../../printerdrake.pm_.c:22 -msgid "Select Printer Connection" -msgstr "Izaberi konekciju štampača" - -#: ../../printerdrake.pm_.c:23 -msgid "How is the printer connected?" -msgstr "Kako je štampač povezan na računar?" - -#: ../../printerdrake.pm_.c:25 -msgid "" -"\n" -"Printers on remote CUPS servers you do not have to configure\n" -"here; these printers will be automatically detected. Please\n" -"select \"Printer on remote CUPS server\" in this case." -msgstr "" -"\n" -"Ovdje ne morate podešavati štampače na udaljenim CUPS serverima;\n" -"ovi štampači će biti automatski prepoznati. Molimo u ovom slučaju\n" -"izaberite \"Štampač na udaljenom CUPS serveru\"." - -#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88 -#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159 -msgid "None" -msgstr "Nijedan" - -#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160 -msgid "Choose a default printer!" -msgstr "Izaberite default štampač!" - -#: ../../printerdrake.pm_.c:105 -msgid "" -"With remote CUPS servers, you do not have to configure any \n" -"printer here; CUPS servers inform your machine automatically\n" -"about their printers. All printers known to your machine\n" -"currently are listed in the \"Default printer\" field. Choose\n" -"the default printer for your machine there and click the\n" -"\"Apply/Re-read printers\" button. Click the same button to\n" -"refresh the list (it can take up to 30 seconds after the start\n" -"of CUPS until all remote printers are visible).\n" -"When your CUPS server is in a different network, you have to \n" -"give the CUPS server IP address and optionally the port number\n" -"to get the printer information from the server, otherwise leave\n" -"these fields blank." -msgstr "" -"Sa udaljenim CUPS serverom, ne morate podešavati nijedan\n" -"štampač ovdje; CUPS serveri obavještavaju vašu mašinu automatski\n" -"o svojim štampačima. Svi štampači koji su trenutno poznati vašoj\n" -"mašini su izlistani u polju \"Podrazumjevani štampač\". Izaberite " -"podrazumjevani\n" -"štampač za vašu mašinu ovdje i kliknite na dugme \"Primjeni/Ponovo\n" -"pročitaj štampače\". Kliknite na isto dugme za osvježavanje liste (može\n" -"trajati do 30 sekundi nakon pokretanja CUPSa dok svi udaljeni štampači\n" -"ne postanu vidljivi).\n" -"Kada je vaš CUPS server u različitoj mreži, morate dati IP adresu CUPS\n" -"servera i opcionalno broj porta kako bi se dobavile informacije o " -"štampačima\n" -"sa servera, inače ostavite ova polja praznim." - -#: ../../printerdrake.pm_.c:117 -msgid "" -"\n" -"Normally, CUPS is automatically configured according to your\n" -"network environment, so that you can access the printers on the\n" -"CUPS servers in your local network. If this does not work \n" -"correctly, turn off \"Automatic CUPS configuration\" and edit\n" -"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n" -"CUPS afterwards (command: \"service cups restart\")." -msgstr "" -"\n" -"Normally, CUPS is automatically configured according to your\n" -"network environment, so that you can access the printers on the\n" -"CUPS servers in your local network. If this does not work \n" -"correctly, turn off \"Automatic CUPS configuration\" and edit\n" -"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n" -"CUPS afterwards (command: \"service cups restart\")." - -#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290 -#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295 -#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011 -msgid "Close" -msgstr "Zatvori" - -#: ../../printerdrake.pm_.c:125 -msgid "Apply/Re-read printers" -msgstr "Primjeni/Ponovo pročitaj štampače" - -#: ../../printerdrake.pm_.c:129 -msgid "The IP address should look like 192.168.1.20" -msgstr "IP adresa treba biti u formatu 192.168.1.20" - -#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541 -msgid "The port number should be an integer!" -msgstr "Broj porta treba biti cijeli broj!" - -#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095 -msgid "Default printer" -msgstr "Podrazumjevani štampač" - -#: ../../printerdrake.pm_.c:146 -msgid "CUPS server IP" -msgstr "IP CUPS servera" - -#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534 -msgid "Port" -msgstr "Port" - -#: ../../printerdrake.pm_.c:149 -msgid "Automatic CUPS configuration" -msgstr "Automatska konfiguracija CUPSa" - -#: ../../printerdrake.pm_.c:217 -msgid "Detecting devices ..." -msgstr "Prepoznajem uređaje ..." - -#: ../../printerdrake.pm_.c:217 -msgid "Test ports" -msgstr "Testiraj portove" - -#: ../../printerdrake.pm_.c:238 -#, c-format -msgid "A printer, model \"%s\", has been detected on " -msgstr "Štampač, model \"%s\", je pronađen na" - -#: ../../printerdrake.pm_.c:255 -msgid "Local Printer Device" -msgstr "Lokalni uređaj štampača" - -#: ../../printerdrake.pm_.c:256 -msgid "" -"What device is your printer connected to \n" -"(note that /dev/lp0 is equivalent to LPT1:)?\n" -msgstr "" -"Na koji uređaj je vaš štampač priključen \n" -"(/dev/lp0 je ekvivalentno LPT1:)?\n" - -#: ../../printerdrake.pm_.c:258 -msgid "Printer Device" -msgstr "Uređaj štampača" - -#: ../../printerdrake.pm_.c:261 -msgid "Device/file name missing!" -msgstr "Ime datoteke/uređaja nedostaje!" - -#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698 -#: ../../printerdrake.pm_.c:786 -msgid "Reading printer database ..." -msgstr "Čitam bazu podataka o štampačima ..." - -#: ../../printerdrake.pm_.c:312 -msgid "Remote lpd Printer Options" -msgstr "Opcije udaljenog lpd štampača" - -#: ../../printerdrake.pm_.c:313 -msgid "" -"To use a remote lpd printer, you need to supply\n" -"the hostname of the printer server and the printer name\n" -"on that server." -msgstr "" -"Da biste udaljeni lpd štampač, morate dati ime računara za\n" -"printer server i ime štampača na tom serveru." - -#: ../../printerdrake.pm_.c:316 -msgid "Remote host name" -msgstr "Ime udaljenog računara" - -#: ../../printerdrake.pm_.c:317 -msgid "Remote printer name" -msgstr "Ime udaljenog štampača" - -#: ../../printerdrake.pm_.c:320 -msgid "Remote host name missing!" -msgstr "Ime udaljenog računara nedostaje!" - -#: ../../printerdrake.pm_.c:324 -msgid "Remote printer name missing!" -msgstr "Ime udaljenog štampača nedostaje!" - -#: ../../printerdrake.pm_.c:392 -msgid "SMB (Windows 9x/NT) Printer Options" -msgstr "Opcije SMB (Windows 9x/NT) štampača" - -#: ../../printerdrake.pm_.c:393 -msgid "" -"To print to a SMB printer, you need to provide the\n" -"SMB host name (Note! It may be different from its\n" -"TCP/IP hostname!) and possibly the IP address of the print server, as\n" -"well as the share name for the printer you wish to access and any\n" -"applicable user name, password, and workgroup information." -msgstr "" -"Da biste štampali na SMB štampač, morate dati\n" -"ime SMB računara (Pažnja! Ono može biti različito od\n" -"TCP/IP imena!) i eventualno IP adresu print servera, kao i\n" -"share naziv štampača kojem želite pristupiti i korisničko ime,\n" -"šifru i informacije o radnoj grupi." - -#: ../../printerdrake.pm_.c:398 -msgid "SMB server host" -msgstr "SMB server ime" - -#: ../../printerdrake.pm_.c:399 -msgid "SMB server IP" -msgstr "SMB server IP" - -#: ../../printerdrake.pm_.c:400 -msgid "Share name" -msgstr "Share naziv" - -#: ../../printerdrake.pm_.c:403 -msgid "Workgroup" -msgstr "Radna grupa" - -#: ../../printerdrake.pm_.c:410 -msgid "Either the server name or the server's IP must be given!" -msgstr "Treba biti dato ili ime servera ili IP adresa servera!" - -#: ../../printerdrake.pm_.c:414 -msgid "Samba share name missing!" -msgstr "Naziv samba share-a nedostaje!" - -#: ../../printerdrake.pm_.c:473 -msgid "NetWare Printer Options" -msgstr "Opcije NetWare štampača" - -#: ../../printerdrake.pm_.c:474 -msgid "" -"To print on a NetWare printer, you need to provide the\n" -"NetWare print server name (Note! it may be different from its\n" -"TCP/IP hostname!) as well as the print queue name for the printer you\n" -"wish to access and any applicable user name and password." -msgstr "" -"Da biste štampali na NetWare štampač, trebate dati\n" -"naziv NetWare print servera (Pažnja! Ono može biti različito od\n" -"njegovog TCP/IP imena!) kao i naziv reda za štampu na štampaču\n" -"kojem želite pristupiti i eventualno korisničko ime i šifru." - -#: ../../printerdrake.pm_.c:478 -msgid "Printer Server" -msgstr "Printer Server" - -#: ../../printerdrake.pm_.c:479 -msgid "Print Queue Name" -msgstr "Naziv reda za štampu" - -#: ../../printerdrake.pm_.c:484 -msgid "NCP server name missing!" -msgstr "NCP naziv servera nedostaje!" - -#: ../../printerdrake.pm_.c:488 -msgid "NCP queue name missing!" -msgstr "NCP naziv reda nedostaje!" - -#: ../../printerdrake.pm_.c:527 -msgid "Socket Printer Options" -msgstr "Opcije socket štampača" - -#: ../../printerdrake.pm_.c:528 -msgid "" -"To print to a socket printer, you need to provide the\n" -"host name of the printer and optionally the port number.\n" -"On HP JetDirect servers the port number is usually 9100,\n" -"on other servers it can vary. See the manual of your\n" -"hardware." -msgstr "" -"Da biste štampali na socket štampač, morate dati\n" -"hostname štampača i opcionalno broj porta.\n" -"Na HP JetDirect serverima broj porta je obično 9100,\n" -"na ostalim serverima on može varirati. Pogledajte\n" -"priručnik vašeg hardware-a." - -#: ../../printerdrake.pm_.c:533 -msgid "Printer host name" -msgstr "Hostname štampača" - -#: ../../printerdrake.pm_.c:537 -msgid "Printer host name missing!" -msgstr "Hostname štampača nedostaje!" - -#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568 -msgid "Printer Device URI" -msgstr "URI uređaja štampača" - -#: ../../printerdrake.pm_.c:567 -msgid "" -"You can specify directly the URI to access the printer. The URI must fulfill " -"either the CUPS or the Foomatic specifications. Note that not all URI types " -"are supported by all the spoolers." -msgstr "" -"Možete dati direktno URI za pristup štampaču. URI mora zadovoljavati ili " -"CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja " -"podržani od svih spoolera." - -#: ../../printerdrake.pm_.c:582 -msgid "A valid URI must be entered!" -msgstr "Trebate unijeti ispravan URI!" - -#: ../../printerdrake.pm_.c:682 -msgid "" -"Every printer needs a name (for example lp).\n" -"The Description and Location fields do not need \n" -"to be filled in. They are comments for the users." -msgstr "" -"Svakom štampaču treba dati ime (npr. lp).\n" -"Polja Opis i Lokacija nije potrebno popuniti.\n" -"Oni su komentari za korisnike." - -#: ../../printerdrake.pm_.c:685 -msgid "Name of printer" -msgstr "Naziv štampača" - -#: ../../printerdrake.pm_.c:686 -msgid "Description" -msgstr "Opis" - -#: ../../printerdrake.pm_.c:687 -msgid "Location" -msgstr "Lokacija" - -#: ../../printerdrake.pm_.c:701 -msgid "Preparing printer database ..." -msgstr "Pripremam bazu podataka o štampačima..." - -#: ../../printerdrake.pm_.c:793 -msgid "Printer model selection" -msgstr "Izbor modela štampača" - -#: ../../printerdrake.pm_.c:794 -msgid "Which printer model do you have?" -msgstr "Koji model štampača imate?" - -#: ../../printerdrake.pm_.c:866 -msgid "OKI winprinter configuration" -msgstr "Podešavanje OKI winprinter-a" - -#: ../../printerdrake.pm_.c:867 -msgid "" -"You are configuring an OKI laser winprinter. These printers\n" -"use a very special communication protocol and therefore they\n" -"work only when connected to the first parallel port. When\n" -"your printer is connected to another port or to a print\n" -"server box please connect the printer to the first parallel\n" -"port before you print a test page. Otherwise the printer\n" -"will not work. Your connection type setting will be ignored\n" -"by the driver." -msgstr "" -"Sada podešavate OK laserski winprinter. Ovi štampači\n" -"koriste jedan poseban komunikacijski protokol i stoga\n" -"rade samo kada su spojeni na prvom paralelnom portu.\n" -"Ako je vaš štampač spojen na neki drugi port ili na print\n" -"server molimo spojite štampač na prvi paralelni port prije\n" -"nego što odštampate testnu stranicu. Inače štampač neće\n" -"raditi. Drajver će ignorisati vaše podešenje tipa konekcije." - -#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946 -msgid "Lexmark inkjet configuration" -msgstr "Podešavanje Lexmark inkjet-a" - -#: ../../printerdrake.pm_.c:917 -msgid "" -"The inkjet printer drivers provided by Lexmark only support\n" -"local printers, no printers on remote machines or print server\n" -"boxes. Please connect your printer to a local port or\n" -"configure it on the machine where it is connected to." -msgstr "" -"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju\n" -"samo lokalne štampače, a ne i štampače na udaljenim računarima\n" -"ili print serverima. Molimo spojite vaš štampač na lokalni port ili\n" -"ga podesite na mašini na koju je spojen." - -#: ../../printerdrake.pm_.c:947 -msgid "" -"To be able to print with your Lexmark inkjet and this\n" -"configuration, you need the inkjet printer drivers\n" -"provided by Lexmark (http://www.lexmark.com/). Go to\n" -"the US site and click on the \"Drivers\" button. Then\n" -"choose your model and afterwards \"Linux\" as\n" -"operating system. The drivers come as RPM packages\n" -"or shell scripts with interactive graphical installation.\n" -"You do not need to do this configuration by the\n" -"graphical frontends. Cancel directly after the license\n" -"agreement. Then print printhead alignment pages with\n" -"\"lexmarkmaintain\" and adjust the head alignment\n" -"settings with this program." -msgstr "" -"Da biste mogli štampati sa vašim Lexmark inkjetom na\n" -"ovoj konfiguraciji, potrebni su vam inkjet drajveri za štampu\n" -"koje obezbjeđuje Lexmark (http://www.lexmark.com/). Idite\n" -"na US stranicu i kliknite na dugme \"Drivers\". Zatim izaberite\n" -"vaš model a zatim \"Linux\" kao operativni sistem. Drajveri\n" -"dolaze u vidu RPM paketa ili shell skripte sa interaktivnom\n" -"grafičkom instalacijom. Ne morate obaviti ovu konfiguraciju\n" -"na grafičkom interfejsu. Odustanite odmah nakon licencnog\n" -"ugovora. Zatim odštampaje stranice za poravnavanje glava\n" -"sa \"lexmarkmaintain\" i podesite opcije poravnanja glave\n" -"pomoću ovog programa." - -#: ../../printerdrake.pm_.c:1079 -msgid "" -"Printer default settings\n" -"You should make sure that the page size and the\n" -"ink type (if available) are set correctly. Note\n" -"that with a very high printout quality printing\n" -"can get substantially slower." -msgstr "" -"Podrazumjevane opcije štampača\n" -"Trebate provjeriti da su veličina papira i tip tinte\n" -"(ako je dostupno) ispravno podešeni. Primjetite\n" -"da za voma veliku kvalitetu štampa može postati\n" -"znatno sporija." - -#: ../../printerdrake.pm_.c:1090 -#, c-format -msgid "Option %s must be an integer number!" -msgstr "Opcija %s mora biti cijeli broj!" - -#: ../../printerdrake.pm_.c:1094 -#, c-format -msgid "Option %s must be a number!" -msgstr "Opcija %s mora biti broj!" - -#: ../../printerdrake.pm_.c:1099 -#, c-format -msgid "Option %s out of range!" -msgstr "Opcija %s izvan raspona!" - -#: ../../printerdrake.pm_.c:1136 -#, c-format -msgid "" -"Do you want to set this printer (\"%s\")\n" -"as the default printer?" -msgstr "" -"Da li želite da podesite ovaj štampač (\"%s\")\n" -"kao podrazumjevani štampač?" - -#: ../../printerdrake.pm_.c:1152 -msgid "Test pages" -msgstr "Testna stranica" - -#: ../../printerdrake.pm_.c:1153 -msgid "" -"Please select the test pages you want to print.\n" -"Note: the photo test page can take a rather long time to get printed\n" -"and on laser printers with too low memory it can even not come out.\n" -"In most cases it is enough to print the standard test page." -msgstr "" -"Molimo izaberite testne stranice koje ćete štampati.\n" -"Pažnja: foto testna stranica može tražiti dosta vremena za štampu\n" -"a na laserskim štampačima sa malo memorije možda neće nikad ni\n" -"izaći. U većini slučajeva dovoljno je odštampati standardnu testnu stranicu." - -#: ../../printerdrake.pm_.c:1158 -msgid "No test pages" -msgstr "Nijedna testna strana" - -#: ../../printerdrake.pm_.c:1159 -msgid "Print" -msgstr "Štampaj" - -#: ../../printerdrake.pm_.c:1161 -msgid "Standard test page" -msgstr "Standardna testna strana" - -#: ../../printerdrake.pm_.c:1164 -msgid "Alternative test page (Letter)" -msgstr "Alternativna testna strana (Letter)" - -#: ../../printerdrake.pm_.c:1167 -msgid "Alternative test page (A4)" -msgstr "Alternativna testna strana (A4)" - -#: ../../printerdrake.pm_.c:1169 -msgid "Photo test page" -msgstr "Foto testna strana" - -#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297 -msgid "Printing test page(s)..." -msgstr "Štampam testnu stranicu..." - -#: ../../printerdrake.pm_.c:1200 -#, c-format -msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -"Printing status:\n" -"%s\n" -"\n" -msgstr "" -"Testna stranica je poslana štampaču.\n" -"Može potrajati određeno vrijeme dok štampač krene.\n" -"Status štampanja:\n" -"%s\n" -"\n" - -#: ../../printerdrake.pm_.c:1204 -msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -msgstr "" -"Testna stranica je poslana štampaču.\n" -"Može potrajati određeno vrijeme dok štampač krene.\n" - -#: ../../printerdrake.pm_.c:1211 -msgid "Did it work properly?" -msgstr "Da li je radilo ispravno?" - -#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025 -msgid "Raw printer" -msgstr "Sirovi štampač" - -#: ../../printerdrake.pm_.c:1237 -#, c-format -msgid "" -"To print a file from the command line (terminal window) you can either use " -"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " -"\"qtcups <file>\". The graphical tools allow you to choose the printer and " -"to modify the option settings easily.\n" -msgstr "" -"Za štampanje datoteke sa komandne linije (terminalski prozor) možete " -"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za štampu: \"xpp " -"<datoteka>\" ili \"qtcups <datoteka>\". Grafički alati vam omogućuju da " -"jednostavno odaberete štampač i izmjenite podešenja opcija.\n" - -#: ../../printerdrake.pm_.c:1239 -msgid "" -"These commands you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications, but here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"Ove komande možete također koristiti u polju \"Komanda za štampu\" u " -"dijalozima za štampu mnogih aplikacija, ali ovdje ne morate navesti ime " -"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n" - -#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254 -#: ../../printerdrake.pm_.c:1266 -#, c-format -msgid "" -"\n" -"The \"%s\" command also allows to modify the option settings for a " -"particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\". " -msgstr "" -"\n" -"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak " -"štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. \"%s " -"<datoteka>\". " - -#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284 -msgid "" -"To get a list of the options available for the current printer read either " -"the list shown below or click on the \"Print option list\" button.\n" -"\n" -msgstr "" -"Za listu opcija koje su dostupne za trenutni štampač ili pročitajte listu " -"koja je data ispod ili kliknite na dugme \"Lista opcija za štampu\".\n" -"\n" - -#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\".\n" -msgstr "" -"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite " -"komandu \"%s <datoteka>\".\n" - -#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263 -#: ../../printerdrake.pm_.c:1275 -msgid "" -"This command you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications. But here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" -"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u " -"dijalozima za štampu mnogih aplikacija. Ovdje nije potrebno navesti naziv " -"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n" - -#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268 -msgid "" -"To get a list of the options available for the current printer click on the " -"\"Print option list\" button.\n" -"\n" -msgstr "" -"Za listu opcija koje su dostupne za trenutni štampač kliknite na dugme " -"\"Lista opcija za štampu\".\n" -"\n" - -#: ../../printerdrake.pm_.c:1273 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"<file>\" or \"%s <file>\".\n" -msgstr "" -"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite " -"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n" - -#: ../../printerdrake.pm_.c:1277 -msgid "" -"You can also use the graphical interface \"xpdq\" for setting options and " -"handling printing jobs.\n" -"If you are using KDE as desktop environment you have a \"panic button\", an " -"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " -"jobs immediately when you click it. This is for example useful for paper " -"jams.\n" -msgstr "" -"Možete također koristiti grafički interfejs \"xpdq\" za podešavanje opcija i " -"upravljanje zadacima štampe.\n" -"Ako koristite KDE okruženje radne površine imate \"dugme za paniku\". To je " -"ikona na radnoj površini čiji je naziv \"ZAUSTAVI štampač!\", koja " -"zaustavlja sve zadatke štampe odmah kada kliknete na nju. Ovo je korisno " -"npr. u slučaju zaglavljivanja papira.\n" - -#: ../../printerdrake.pm_.c:1281 -#, c-format -msgid "" -"\n" -"The \"%s\" and \"%s\" commands also allow to modify the option settings for " -"a particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s <file>\".\n" -msgstr "" -"\n" -"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni " -"zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, " -"npr. \"%s <datoteka>\".\n" - -#: ../../printerdrake.pm_.c:1292 -#, c-format -msgid "Printing on the printer \"%s\"" -msgstr "Štampam na štampač \"%s\"" - -#: ../../printerdrake.pm_.c:1294 -msgid "Print option list" -msgstr "Lista opcija za štampu" - -#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741 -#: ../../standalone/printerdrake_.c:48 -msgid "Reading printer data ..." -msgstr "Čitam podatke o štampaču..." - -#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376 -#: ../../printerdrake.pm_.c:1411 -msgid "Transfer printer configuration" -msgstr "Premještanje konfiguracije štamapča" - -#: ../../printerdrake.pm_.c:1339 -#, c-format -msgid "" -"You can copy the printer configuration which you have done \n" -"for the spooler %s to %s, your current spooler. All the\n" -"configuration data (printer name, description, location, \n" -"connection type, and default option settings) is overtaken,\n" -"but jobs will not be transferred.\n" -"Not all queues can be transferred due to the following \n" -"reasons:\n" -msgstr "" -"Možete kopirati konfiguraciju štampača koju ste napravili \n" -"za spooler %s u %s, vaš trenutni spooler. Svi podaci o\n" -"konfiguraciji (naziv štampača, opis, lokacija, tip konekcije\n" -"kao i podrazumjevane opcije) će biti preuzeti, ali zadaci\n" -"štampe neće biti prebačeni.\n" -"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n" - -#: ../../printerdrake.pm_.c:1347 -msgid "" -"CUPS does not support printers on Novell servers or printers\n" -"sending the data into a free-formed command.\n" -msgstr "" -"CUPS ne podržava štampače na Novell serverima ili štampače\n" -"koji šalju podatke u komandama slobodnog oblika.\n" - -#: ../../printerdrake.pm_.c:1350 -msgid "" -"PDQ only supports local printers, remote LPD printers, and\n" -"Socket/TCP printers.\n" -msgstr "" -"PDQ podržava samo lokalne štampače, udaljene LPD štampače\n" -"i Socket/TCP štampače.\n" - -#: ../../printerdrake.pm_.c:1353 -msgid "LPD and LPRng do not support IPP printers.\n" -msgstr "LPD i LPRng ne podržavaju IPP štampače.\n" - -#: ../../printerdrake.pm_.c:1355 -msgid "" -"In addition, queues not created with this program or\n" -"\"foomatic-configure\" cannot be transferred." -msgstr "" -"Pored toga, redovi koji nisu kreirani ovim programom ili\n" -"\"foomatic-configure\" ne mogu biti premješteni." - -#: ../../printerdrake.pm_.c:1357 -msgid "" -"\n" -"Also printers configured with the PPD files provided by\n" -"their manufacturers or with native CUPS drivers can not be\n" -"transferred." -msgstr "" -"\n" -"Također štampači konfigurisani sa PPD datotekama koje\n" -"su osigurali njihovi proizvođači ili sa vlastitim CUPS drajverima\n" -"ne mogu biti prebačeni." - -#: ../../printerdrake.pm_.c:1360 -msgid "" -"\n" -"Mark the printers which you want to transfer and click \n" -"\"Transfer\"." -msgstr "" -"\n" -"Označite štampače koje ćete prebacivati i kliknite na \n" -"\"Prebaci\"." - -#: ../../printerdrake.pm_.c:1363 -msgid "Do not transfer printers" -msgstr "Nemoj prebacivati štampače" - -#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381 -msgid "Transfer" -msgstr "Prebaci" - -#: ../../printerdrake.pm_.c:1377 -#, c-format -msgid "" -"A printer named \"%s\" already exists under %s. \n" -"Click \"Transfer\" to overwrite it.\n" -"You can also type a new name or skip this printer." -msgstr "" -"Štampač pod imenom \"%s\" već postoji pod %s: \n" -"Kliknite na \"Prebaci\" da to prepišete.\n" -"Možete također unijeti novo ime ili preskočiti ovaj štampač." - -#: ../../printerdrake.pm_.c:1385 -msgid "Name of printer should contain only letters, numbers and the underscore" -msgstr "Naziv štampača bi se trebao sastojati od slova, brojeva i donje linije" - -#: ../../printerdrake.pm_.c:1390 -#, c-format -msgid "" -"The printer \"%s\" already exists,\n" -"do you really want to overwrite its configuration?" -msgstr "" -"Štampač \"%s\" već postoji,\n" -"da li sigurno želite prepisati ovu konfiguraciju?" - -#: ../../printerdrake.pm_.c:1398 -msgid "New printer name" -msgstr "Novo ime štampača" - -#: ../../printerdrake.pm_.c:1401 -#, c-format -msgid "Transferring %s ..." -msgstr "Prebacujem %s ..." - -#: ../../printerdrake.pm_.c:1412 -#, c-format -msgid "" -"You have transferred your former default printer (\"%s\"),\n" -"Should it be also the default printer under the\n" -"new printing system %s?" -msgstr "" -"Prebacili ste vaš bivši podrazumjevani štampač (\"%s\"),\n" -"Da li će to također biti podrazumjevani štampač pod\n" -"novim sistemom štampe %s?" - -#: ../../printerdrake.pm_.c:1423 -msgid "Refreshing printer data ..." -msgstr "Osvježavam podatke o štampaču..." - -#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494 -#: ../../printerdrake.pm_.c:1515 -msgid "Configuration of a remote printer" -msgstr "Podešavanje udaljenog štampača" - -#: ../../printerdrake.pm_.c:1432 -msgid "Starting network ..." -msgstr "Pokrećem mrežu..." - -#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462 -#: ../../printerdrake.pm_.c:1464 -msgid "Configure the network now" -msgstr "Sada podesite mrežu" - -#: ../../printerdrake.pm_.c:1455 -msgid "Network functionality not configured" -msgstr "Mrežna funkcionalnost nije podešena" - -#: ../../printerdrake.pm_.c:1456 -msgid "" -"You are going to configure a remote printer. This needs working\n" -"network access, but your network is not configured yet. If you\n" -"go on without network configuration, you will not be able to use\n" -"the printer which you are configuring now. How do you want \n" -"to proceed?" -msgstr "" -"Sada ćete podesiti udaljeni štampač. Ovo zahtjeva aktivan\n" -"pristup mreži, ali vaša mreža još uvijek nije podešena. Ako\n" -"želite nastaviti bez podešavanja mreže, nećete moći koristiti\n" -"štampač koji sada podešavate. Kako želite da nastavimo?" - -#: ../../printerdrake.pm_.c:1463 -msgid "Go on without configuring the network" -msgstr "Nastavi bez podešavanja mreže" - -#: ../../printerdrake.pm_.c:1496 -msgid "" -"The network configuration done during the installation \n" -"cannot be started now. Please check whether the network\n" -"gets accessable after booting your system and correct the\n" -"configuration using the Mandrake Control Center, section\n" -"\"Network & Internet\"/\"Connection\", and afterwards set\n" -"up the printer, also using the Mandrake Control Center,\n" -"section \"Hardware\"/\"Printer\"" -msgstr "" -"Podešavanje mreže koje je napravljeno tokom instalacije\n" -"sada ne može biti pokrenuto. Molim provjerite da li će mreža\n" -"postati dostupna nakon bootanja sistema i popravite podešenja\n" -"koristeći Mandrake Kontrolni centar, sekcija \"Mreža i\n" -"Internet\"/\"Konekcija\", a zatim podesite štampač, ponovo koristeći\n" -"Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Štampač\"" - -#: ../../printerdrake.pm_.c:1503 -msgid "" -"The network access was not running and could not be \n" -"started. Please check your configuration and your \n" -"hardware. Then try to configure your remote printer\n" -"again." -msgstr "" -"Mrežni pristup nije aktivan i nije mogao biti pokrenut.\n" -"Molimo provjerite vašu konfiguraciju i vaš hardware.\n" -"Onda ponovo pokušajte podesiti udaljeni štampač." - -#: ../../printerdrake.pm_.c:1516 -msgid "Restarting printing system ..." -msgstr "Restartujem sistem za štampu ..." - -#: ../../printerdrake.pm_.c:1548 -msgid "high" -msgstr "visok" - -#: ../../printerdrake.pm_.c:1548 -msgid "paranoid" -msgstr "paranoičan" - -#: ../../printerdrake.pm_.c:1549 -#, c-format -msgid "Installing a printing system in the %s security level" -msgstr "Instaliram sistem za štampu na sigurnosnom nivou: %s" - -#: ../../printerdrake.pm_.c:1550 -#, c-format -msgid "" -"You are about to install the printing system %s on\n" -"a system running in the %s security level.\n" -"\n" -"This printing system runs a daemon (background process)\n" -"which waits for print jobs and handles them. This daemon\n" -"is also accessable by remote machines through the network\n" -"and so it is a possible point for attacks. Therefore only\n" -"a few selected daemons are started by default in this\n" -"security level.\n" -"\n" -"Do you really want to configure printing on this\n" -"machine?" -msgstr "" -"Sada ćete instalirati sistem za štampu %s na sistemu\n" -"koji je na sigurnosnom nivou: %s.\n" -"\n" -"Ovaj sistem za štampu pokreće demon (pozadinski proces)\n" -"koji čeka zadatke štampe i rješava ih. Ovom demon takođe mogu\n" -"pristupiti druge mašine putem mreže, tako da je to moguća\n" -"tačka napada. Stoga se tek rijetki od odabranih demona pokreću\n" -"na ovom sigurnosnom nivou.\n" -"\n" -"Da li zaista želite podesiti štampanje na ovoj mašini?" - -#: ../../printerdrake.pm_.c:1584 -msgid "Starting the printing system at boot time" -msgstr "Pokrećem sistem za štampu tokom boota" - -#: ../../printerdrake.pm_.c:1585 -#, c-format -msgid "" -"The printing system (%s) will not be started automatically\n" -"when the machine is booted.\n" -"\n" -"It is possible that the automatic starting was turned off \n" -"by changing to a higher security level, because the printing\n" -"system is a potential point for attacks.\n" -"\n" -"Do you want to have the automatic starting of the printing\n" -"system turned on again?" -msgstr "" -"Sistem za štampu (%s) se neće pokrenuti automatski\n" -"prilikom boota mašine.\n" -"\n" -"Moguće je da je automatsko pokretanje isključeno prilikom\n" -"promjene na viši nivo sigurnosni, pošto je sistem za štampu\n" -"moguća tačka napada.\n" -"\n" -"Da li želite da ponovo uključite automatsko pokretanje sistema\n" -"za štampu?" - -#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644 -#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701 -#: ../../printerdrake.pm_.c:1778 -msgid "Checking installed software..." -msgstr "Provjeravam instalirani software..." - -#: ../../printerdrake.pm_.c:1648 -msgid "Removing LPRng..." -msgstr "Uklanjam LPRng..." - -#: ../../printerdrake.pm_.c:1675 -msgid "Removing LPD..." -msgstr "Uklanjam LPD..." - -#: ../../printerdrake.pm_.c:1727 -msgid "Select Printer Spooler" -msgstr "Izaberite spooler štampača" - -#: ../../printerdrake.pm_.c:1728 -msgid "Which printing system (spooler) do you want to use?" -msgstr "Koji sistem štampanja (spooler) želite koristiti?" - -#: ../../printerdrake.pm_.c:1759 -#, c-format -msgid "Configuring printer \"%s\" ..." -msgstr "Podešavam štampač \"%s\"..." - -#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838 -#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088 -msgid "Printer options" -msgstr "Opcije štampača" - -#: ../../printerdrake.pm_.c:1815 -msgid "Preparing PrinterDrake ..." -msgstr "Pripremam PrinterDrake..." - -#: ../../printerdrake.pm_.c:1845 -msgid "Would you like to configure printing?" -msgstr "Da li želite podesiti štampanje?" - -#: ../../printerdrake.pm_.c:1857 -msgid "Printing system: " -msgstr "Sistem štampe: " - -#: ../../printerdrake.pm_.c:1879 -msgid "" -"The following printers are configured.\n" -"Click on one of them to modify it or\n" -"to get information about it or on \n" -"\"Add Printer\" to add a new printer." -msgstr "" -"Sljedeli štampači su podešeni.\n" -"Kliknite na neki od njih za izmjenu\n" -"ili informacije o njemu, ili kliknite na\n" -"\"Dodaj štampač\" da biste dodali novi." - -#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301 -msgid "Normal Mode" -msgstr "Normalni mod" - -#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010 -msgid " (Default)" -msgstr " (Default)" - -#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935 -msgid "Printer(s) on remote CUPS server(s)" -msgstr "Štampač(i) na udaljenom CUPS serveru" - -#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936 -msgid "Printer(s) on remote server(s)" -msgstr "Štampač(i) na udaljenom serveru" - -#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919 -#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971 -msgid "Add printer" -msgstr "Dodaj štampač" - -#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993 -#: ../../printerdrake.pm_.c:2128 -msgid "Do you want to configure another printer?" -msgstr "Želite li podesiti još jedan štampač?" - -#: ../../printerdrake.pm_.c:2003 -msgid "Modify printer configuration" -msgstr "Izmjeni konfiguraciju štampača" - -#: ../../printerdrake.pm_.c:2004 -#, c-format -msgid "" -"Printer %s: %s %s\n" -"What do you want to modify on this printer?" -msgstr "" -"Štampač %s: %s %s\n" -"Šta želite da izmjenite na ovom štampaču?" - -#: ../../printerdrake.pm_.c:2012 -msgid "Do it!" -msgstr "Uradi!" - -#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062 -msgid "Printer connection type" -msgstr "Tip konekcije štampača" - -#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066 -msgid "Printer name, description, location" -msgstr "Naziv štampača, opis, lokacija" - -#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081 -msgid "Printer manufacturer, model, driver" -msgstr "Proizvođač štampača, model, drajver" - -#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082 -msgid "Printer manufacturer, model" -msgstr "Proizvođač štampača, model" - -#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092 -msgid "Set this printer as the default" -msgstr "Podesi štampač kao podrazumjevani" - -#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097 -msgid "Print test pages" -msgstr "Štampaj testnu stranicu" - -#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099 -msgid "Know how to print with this printer" -msgstr "Saznaj kako štampati ovim štampačem" - -#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101 -msgid "Remove printer" -msgstr "Ukloni štampač" - -#: ../../printerdrake.pm_.c:2071 -#, c-format -msgid "Removing old printer \"%s\" ..." -msgstr "Uklanjam stari štampač \"%s\" ..." - -#: ../../printerdrake.pm_.c:2096 -#, c-format -msgid "The printer \"%s\" is set as the default printer now." -msgstr "Štampač \"%s\" je sada podešen kao podrazumjevani štampač." - -#: ../../printerdrake.pm_.c:2103 -#, c-format -msgid "Do you really want to remove the printer \"%s\"?" -msgstr "Da li želite da uklonite štampač \"%s\"?" - -#: ../../printerdrake.pm_.c:2105 -#, c-format -msgid "Removing printer \"%s\" ..." -msgstr "Uklanjam štampač \"%s\" ..." - -#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 -#: ../../proxy.pm_.c:78 -msgid "Proxy configuration" -msgstr "Podešavanje proxija" - -#: ../../proxy.pm_.c:30 -msgid "" -"Welcome to the proxy configuration utility.\n" -"\n" -"Here, you'll be able to set up your http and ftp proxies\n" -"with or without login and password\n" -msgstr "" -"Dobro došli u alat za podešavanje proxija.\n" -"qn Ovdje ćete biti u prilici da podesite vaše http i ftp proxije\n" -"sa ili bez logina i šifre\n" - -#: ../../proxy.pm_.c:38 -msgid "" -"Please fill in the http proxy informations\n" -"Leave it blank if you don't want an http proxy" -msgstr "" -"Molimo popunite informacije o http proxiju\n" -"Ostavite polja praznim ako ne želite http proxy" - -#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 -msgid "URL" -msgstr "URL" - -#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 -msgid "port" -msgstr "port" - -#: ../../proxy.pm_.c:44 -msgid "Url should begin with 'http:'" -msgstr "Url treba počinjati sa 'http:'" - -#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 -msgid "The port part should be numeric" -msgstr "Port treba biti broj" - -#: ../../proxy.pm_.c:59 -msgid "" -"Please fill in the ftp proxy informations\n" -"Leave it blank if you don't want an ftp proxy" -msgstr "" -"Molimo popunite informacije o ftp proxiju\n" -"Ostavite polja praznim ako ne želite ftp proxy" - -#: ../../proxy.pm_.c:65 -msgid "Url should begin with 'ftp:'" -msgstr "Url treba počinjati sa 'ftp:'" - -#: ../../proxy.pm_.c:79 -msgid "" -"Please enter proxy login and password, if any.\n" -"Leave it blank if you don't want login/passwd" -msgstr "" -"Molimo unesite login i šifru za proxy, ako su potrebni.\n" -"Ostavite polja praznim ako ne želite login/šifru" - -#: ../../proxy.pm_.c:80 -msgid "login" -msgstr "login" - -#: ../../proxy.pm_.c:82 -msgid "password" -msgstr "šifra" - -#: ../../proxy.pm_.c:84 -msgid "re-type password" -msgstr "ponovo unesite šifru" - -#: ../../proxy.pm_.c:88 -msgid "The passwords don't match. Try again!" -msgstr "Šifre se ne poklapaju. Pokušajte opet!" - -#: ../../raid.pm_.c:35 -#, c-format -msgid "Can't add a partition to _formatted_ RAID md%d" -msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d" - -#: ../../raid.pm_.c:111 -#, c-format -msgid "Can't write file %s" -msgstr "Ne mogu pisati datoteku %s" - -#: ../../raid.pm_.c:136 -msgid "mkraid failed" -msgstr "mkraid nije uspio" - -#: ../../raid.pm_.c:136 -msgid "mkraid failed (maybe raidtools are missing?)" -msgstr "mkraid nije uspio (možda nedostaju raidtools?)" - -#: ../../raid.pm_.c:152 -#, c-format -msgid "Not enough partitions for RAID level %d\n" -msgstr "Nema dovoljno particija za RAID nivo %d\n" - -#: ../../services.pm_.c:15 -msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" -msgstr "Pokreni ALSA zvučni sistem (Advanced Linux Sound Architecture)" - -#: ../../services.pm_.c:16 -msgid "Anacron a periodic command scheduler." -msgstr "Anacron periodični pokretač komandi." - -#: ../../services.pm_.c:17 -msgid "" -"apmd is used for monitoring batery status and logging it via syslog.\n" -"It can also be used for shutting down the machine when the battery is low." -msgstr "" -"apmd se koristi za nadgledanje statusa baterija i logovanje preko\n" -"sysloga. Također se može koristiti za gašenje mašine kada su baterije " -"potrošene." - -#: ../../services.pm_.c:19 -msgid "" -"Runs commands scheduled by the at command at the time specified when\n" -"at was run, and runs batch commands when the load average is low enough." -msgstr "" -"Pokreće komande zakazane putem at komande u vrijeme koje je zadato\n" -"prilikom pokretanja at-a, te pokreće pozadinske komande kada je nizak " -"prosječni nivo opterećenja." - -#: ../../services.pm_.c:21 -msgid "" -"cron is a standard UNIX program that runs user-specified programs\n" -"at periodic scheduled times. vixie cron adds a number of features to the " -"basic\n" -"UNIX cron, including better security and more powerful configuration options." -msgstr "" -"cron je standardan UNIX program koji pokreće programe koje zada korisnik\n" -"u periodičnim terminima. vixie cron dodaje veći broj mogućnosti osnovnom\n" -"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje." - -#: ../../services.pm_.c:24 -msgid "" -"GPM adds mouse support to text-based Linux applications such the\n" -"Midnight Commander. It also allows mouse-based console cut-and-paste " -"operations,\n" -"and includes support for pop-up menus on the console." -msgstr "" -"GPM dodaje podršku za miša tekst-baziranim aplikacijama kao što je\n" -"Midnight Commander. On također omogućuje konzolne isjeci/zaljepi operacije\n" -"pomoću miša i uključuje podršku za pop-up menije na konzoli." - -#: ../../services.pm_.c:27 -msgid "" -"HardDrake runs a hardware probe, and optionally configures\n" -"new/changed hardware." -msgstr "" -"HardDrake pokreće probavanje hardware-a i opcionalno konfiguriše\n" -"novi/izmjenjeni hardware." - -#: ../../services.pm_.c:29 -msgid "" -"Apache is a World Wide Web server. It is used to serve HTML files\n" -"and CGI." -msgstr "" -"Apache je World Wide Web server. Koristi se za posluživanje HTML\n" -"datoteka i CGI." - -#: ../../services.pm_.c:31 -msgid "" -"The internet superserver daemon (commonly called inetd) starts a\n" -"variety of other internet services as needed. It is responsible for " -"starting\n" -"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " -"disables\n" -"all of the services it is responsible for." -msgstr "" -"Demon za nadgledanje Interneta (obično nazvan inetd) pokreće\n" -"raznolike druge Internet servise po potrebi. Odgovoran je za pokretanje\n" -"raznih servisa, kao što su telnet, ftp, rsh i rlogin. Isključivanje inetd-a\n" -"isključuje sve servise za koje je on nadležan." - -#: ../../services.pm_.c:35 -msgid "" -"Launch packet filtering for Linux kernel 2.2 series, to set\n" -"up a firewall to protect your machine from network attacks." -msgstr "" -"Pokrenite filtriranje paketa za Linux kernel seriju 2.2 kako\n" -"biste postavili firewall i zaštitili vašu mašinu od mrežnih napada." - -#: ../../services.pm_.c:37 -msgid "" -"This package loads the selected keyboard map as set in\n" -"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" -"You should leave this enabled for most machines." -msgstr "" -"Ovaj paket učitava izabranu mapu tastature kao što je podešeno u\n" -"/etc/sysconfig/keyboarc. Ovo može biti izabrano korištenjem kbdconfig\n" -"programa. Možete ovo ostaviti uključenim na većini mašina." - -#: ../../services.pm_.c:40 -msgid "" -"Automatic regeneration of kernel header in /boot for\n" -"/usr/include/linux/{autoconf,version}.h" -msgstr "" -"Automatsko regenerisanje kernel zaglavlja u /boot za\n" -"/usr/include/linux/{autoconf,version}.h" - -#: ../../services.pm_.c:42 -msgid "Automatic detection and configuration of hardware at boot." -msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota." - -#: ../../services.pm_.c:43 -msgid "" -"Linuxconf will sometimes arrange to perform various tasks\n" -"at boot-time to maintain the system configuration." -msgstr "" -"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n" -"kako bi se održala sistemska konfiguracija." - -#: ../../services.pm_.c:45 -msgid "" -"lpd is the print daemon required for lpr to work properly. It is\n" -"basically a server that arbitrates print jobs to printer(s)." -msgstr "" -"lpd je demon za štampu koji je potreban da bi lpr radio ispravno.\n" -"To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima." - -#: ../../services.pm_.c:47 -msgid "" -"Linux Virtual Server, used to build a high-performance and highly\n" -"available server." -msgstr "" -"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n" -"i dostupnosti." - -#: ../../services.pm_.c:49 -msgid "" -"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" -"host names to IP addresses." -msgstr "" -"named (BIND) je Domain Name Server (DNS) koji se koristi za\n" -"pretvaranje imena računara u IP adrese." - -#: ../../services.pm_.c:51 -msgid "" -"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" -"Manager/Windows), and NCP (NetWare) mount points." -msgstr "" -"Montira i demontira sve Network File System (NFS), SMB (Lan\n" -"Manager/Windows) i NCP (NetWare) tačke montiranja." - -#: ../../services.pm_.c:53 -msgid "" -"Activates/Deactivates all network interfaces configured to start\n" -"at boot time." -msgstr "" -"Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n" -"za pokretanje tokom boota." - -#: ../../services.pm_.c:55 -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP networks.\n" -"This service provides NFS server functionality, which is configured via the\n" -"/etc/exports file." -msgstr "" -"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n" -"Ovaj servis omogućuje funkcionalnost NFS servera, koji je podešen putem\n" -"/etc/exports datoteke." - -#: ../../services.pm_.c:58 -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP\n" -"networks. This service provides NFS file locking functionality." -msgstr "" -"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n" -"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka." - -#: ../../services.pm_.c:60 -msgid "" -"Automatically switch on numlock key locker under console\n" -"and XFree at boot." -msgstr "" -"Automatski uključuje numlock bravu tipaka pod konzolom i\n" -"XFree tokom boota." - -#: ../../services.pm_.c:62 -msgid "Support the OKI 4w and compatible winprinters." -msgstr "Podrška za OK 4w i kompatibilne windows štampače" - -#: ../../services.pm_.c:63 -msgid "" -"PCMCIA support is usually to support things like ethernet and\n" -"modems in laptops. It won't get started unless configured so it is safe to " -"have\n" -"it installed on machines that don't need it." -msgstr "" -"PCMCIA podrška je obično za podržavanje stvari kao što je\n" -"ethernet i modemi u laptopima. Neće se pokrenuti dok se ne\n" -"konfiguriše tako da je sigurno imati ga instaliranog na mašinama\n" -" kojima nije potreban." - -#: ../../services.pm_.c:66 -msgid "" -"The portmapper manages RPC connections, which are used by\n" -"protocols such as NFS and NIS. The portmap server must be running on " -"machines\n" -"which act as servers for protocols which make use of the RPC mechanism." -msgstr "" -"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao što\n" -"su NFS i NIS. Portmap server mora raditi na mašinama koje služe kao\n" -"serveri za protokole koji koriste RPC mehanizam." - -#: ../../services.pm_.c:69 -msgid "" -"Postfix is a Mail Transport Agent, which is the program that\n" -"moves mail from one machine to another." -msgstr "" -"Postfix je Mail Transport Agent, tj. program koji šalje poštu sa\n" -"jedne mašine na drugu." - -#: ../../services.pm_.c:71 -msgid "" -"Saves and restores system entropy pool for higher quality random\n" -"number generation." -msgstr "" -"Spašava i vraća sistemski raspon entropije za veću kvalitetu\n" -"generisanja slučajnih brojeva." - -#: ../../services.pm_.c:73 -msgid "" -"Assign raw devices to block devices (such as hard drive\n" -"partitions), for the use of applications such as Oracle" -msgstr "" -"Dodjeljuje sirove uređaje blokovskim urećajima (kao što su\n" -"particije hard diska) za upotrebu aplikacijama kao što je Oracle" - -#: ../../services.pm_.c:75 -msgid "" -"The routed daemon allows for automatic IP router table updated via\n" -"the RIP protocol. While RIP is widely used on small networks, more complex\n" -"routing protocols are needed for complex networks." -msgstr "" -"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n" -"preko RIP protokola. Mada se RIP često koristi na malim mrežama, " -"kompleksniji\n" -"protokoli rutiranja su potrebni za složene mreže." - -#: ../../services.pm_.c:78 -msgid "" -"The rstat protocol allows users on a network to retrieve\n" -"performance metrics for any machine on that network." -msgstr "" -"rstat protokol omogućava korisnicima na mreži da dobave\n" -"mjeru performansi za svaku mašinu na toj mreži" - -#: ../../services.pm_.c:80 -msgid "" -"The rusers protocol allows users on a network to identify who is\n" -"logged in on other responding machines." -msgstr "" -"rusers protokol omogućava korisnicima na mreži da identificiraju\n" -"ko je prijavljen na ostalim mašinama." - -#: ../../services.pm_.c:82 -msgid "" -"The rwho protocol lets remote users get a list of all of the users\n" -"logged into a machine running the rwho daemon (similiar to finger)." -msgstr "" -"rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n" -"korisnika prijavljenih na mašinu na kojoj radi rwho demon (slično fingeru)." - -#: ../../services.pm_.c:84 -msgid "Launch the sound system on your machine" -msgstr "Pokreće zvučni sistem na vašoj mašini" - -#: ../../services.pm_.c:85 -msgid "" -"Syslog is the facility by which many daemons use to log messages\n" -"to various system log files. It is a good idea to always run syslog." -msgstr "" -"Syslog je pogodnost pomoću koje mnogi demoni zapisuju poruke\n" -"u razne sistemske dnevnike. Dobra ideja je uvijek imati pokrenuti syslog." - -#: ../../services.pm_.c:87 -msgid "Load the drivers for your usb devices." -msgstr "Pokreće drajvere za vaše usb uređaje." - -#: ../../services.pm_.c:88 -msgid "Starts the X Font Server (this is mandatory for XFree to run)." -msgstr "Pokreće X Font Server (ovo je nužno da bi XFree radio)." - -#: ../../services.pm_.c:114 ../../services.pm_.c:156 -msgid "Choose which services should be automatically started at boot time" -msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota" - -#: ../../services.pm_.c:126 -msgid "Printing" -msgstr "Štampa" - -#: ../../services.pm_.c:127 -msgid "Internet" -msgstr "Internet" - -#: ../../services.pm_.c:130 -msgid "File sharing" -msgstr "Dijeljenje datoteka" - -#: ../../services.pm_.c:132 -msgid "System" -msgstr "Sistem" - -#: ../../services.pm_.c:137 -msgid "Remote Administration" -msgstr "Udaljena administracija" - -#: ../../services.pm_.c:145 -msgid "Database Server" -msgstr "Server baze podataka" - -#: ../../services.pm_.c:174 -#, c-format -msgid "Services: %d activated for %d registered" -msgstr "Servisi: %d aktiviran za %d registrovan" - -#: ../../services.pm_.c:186 -msgid "Services" -msgstr "Servisi" - -#: ../../services.pm_.c:198 -msgid "running" -msgstr "aktivan" - -#: ../../services.pm_.c:198 -msgid "stopped" -msgstr "zaustavljen" - -#: ../../services.pm_.c:212 -msgid "Services and deamons" -msgstr "Servisi i demoni" - -#: ../../services.pm_.c:217 -msgid "" -"No additionnal information\n" -"about this service, sorry." -msgstr "" -"Nema dodatnih informacija\n" -"o ovom servisu, izvinite." - -#: ../../services.pm_.c:224 -msgid "On boot" -msgstr "Prilikom boota" - -#: ../../standalone.pm_.c:25 -msgid "Installing packages..." -msgstr "Instaliram pakete..." - -#: ../../standalone/diskdrake_.c:63 -msgid "" -"I can't read your partition table, it's too corrupted for me :(\n" -"I'll try to go on blanking bad partitions" -msgstr "" -"Ne mogu čitati vašu tabelu particija, previše je oštećena za mene :(\n" -"Pokušaću izbrisati loše particije" - -#: ../../standalone/drakautoinst_.c:44 -msgid "Error!" -msgstr "Greška!" - -#: ../../standalone/drakautoinst_.c:45 -#, c-format -msgid "I can't find needed image file `%s'." -msgstr "Ne mogu pronaći potrebnu image datoteku '%s'" - -#: ../../standalone/drakautoinst_.c:47 -msgid "Auto Install Configurator" -msgstr "Podešavanje auto instalacije" - -#: ../../standalone/drakautoinst_.c:48 -msgid "" -"You are about to configure an Auto Install floppy. This feature is somewhat " -"dangerous and must be used circumspectly.\n" -"\n" -"With that feature, you will be able to replay the installation you've " -"performed on this computer, being interactively prompted for some steps, in " -"order to change their values.\n" -"\n" -"For maximum safety, the partitioning and formatting will never be performed " -"automatically, whatever you chose during the install of this computer.\n" -"\n" -"Do you want to continue?" -msgstr "" -"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i " -"mora biti korištena uz pažnju.\n" -"\n" -"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili " -"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake, " -"kako biste promjenili njihove vrijednosti.\n" -"\n" -"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti " -"obavljeno automatski, bez obzira šta izaberete tokom instalacije na ovaj " -"računar.\n" -"\n" -"Da li želite nastaviti?" - -#: ../../standalone/drakautoinst_.c:70 -msgid "Automatic Steps Configuration" -msgstr "Automatska konfiguracija koraka" - -#: ../../standalone/drakautoinst_.c:71 -msgid "" -"Please choose for each step whether it will replay like your install, or it " -"will be manual" -msgstr "" -"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj " -"instalaciji ili će se obaviti ručno" - -#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599 -msgid "Congratulations!" -msgstr "Čestitamo!" - -#: ../../standalone/drakautoinst_.c:113 -msgid "" -"The floppy has been successfully generated.\n" -"You may now replay your installation." -msgstr "" -"Disketa je uspješno napravljena.\n" -"Sada možete ponoviti vašu instalaciju." - -#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181 -msgid "Internet Connection Sharing" -msgstr "Dijeljenje Internet konekcije" - -#: ../../standalone/drakgw_.c:119 -msgid "Internet Connection Sharing currently enabled" -msgstr "Dijeljenje Internet konekcije je trenutno aktivno" - -#: ../../standalone/drakgw_.c:120 -msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently enabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n" -"aktivno.\n" -"\n" -"Šta želite uraditi?" - -#: ../../standalone/drakgw_.c:124 -msgid "disable" -msgstr "isključi" - -#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149 -msgid "dismiss" -msgstr "otkaži" - -#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149 -msgid "reconfigure" -msgstr "rekonfiguriši" - -#: ../../standalone/drakgw_.c:127 -msgid "Disabling servers..." -msgstr "Isključujem servere..." - -#: ../../standalone/drakgw_.c:135 -msgid "Internet connection sharing is now disabled." -msgstr "Dijeljenje Internet konekcije je sada isključeno." - -#: ../../standalone/drakgw_.c:144 -msgid "Internet Connection Sharing currently disabled" -msgstr "Dijeljenje Internet konekcije je trenutno neaktivno" - -#: ../../standalone/drakgw_.c:145 -msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently disabled.\n" -"\n" -"What would you like to do?" -msgstr "" -"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n" -"neaktivno.\n" -"\n" -"Šta želite uraditi?" - -#: ../../standalone/drakgw_.c:149 -msgid "enable" -msgstr "uključi" - -#: ../../standalone/drakgw_.c:156 -msgid "Enabling servers..." -msgstr "Uključujem servere..." - -#: ../../standalone/drakgw_.c:161 -msgid "Internet connection sharing is now enabled." -msgstr "Dijeljenje Internet konekcije je sada uključeno." - -#: ../../standalone/drakgw_.c:182 -msgid "" -"You are about to configure your computer to share its Internet connection.\n" -"With that feature, other computers on your local network will be able to use " -"this computer's Internet connection.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." -msgstr "" -"Sada ćete konfigurisati vaš računar za dijeljenje Internet konekcije.\n" -"Sa ovom opcijom, ostali računari na vašoj lokalnoj mreži će moći koristiti " -"Internet konekciju ovog računara. \n" -"\n" -"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu " -"mrežu (LAN)." - -#: ../../standalone/drakgw_.c:208 -#, c-format -msgid "Interface %s (using module %s)" -msgstr "Interfejs %s (koristeći modul %s)" - -#: ../../standalone/drakgw_.c:209 -#, c-format -msgid "Interface %s" -msgstr "Interfejs %s" - -#: ../../standalone/drakgw_.c:217 -msgid "No network adapter on your system!" -msgstr "Nema mrežnog adaptera na vašem sistemu!" - -#: ../../standalone/drakgw_.c:218 -msgid "" -"No ethernet network adapter has been detected on your system. Please run the " -"hardware configuration tool." -msgstr "" -"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molimo " -"pokrenite alat za podešavanje hardware-a." - -#: ../../standalone/drakgw_.c:224 -msgid "Network interface" -msgstr "Mrežni interface" - -#: ../../standalone/drakgw_.c:225 -#, c-format -msgid "" -"There is only one configured network adapter on your system:\n" -"\n" -"%s\n" -"\n" -"I am about to setup your Local Area Network with that adapter." -msgstr "" -"Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:\n" -"\n" -"%s\n" -"\n" -"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom." - -#: ../../standalone/drakgw_.c:234 -msgid "" -"Please choose what network adapter will be connected to your Local Area " -"Network." -msgstr "" -"Molimo izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu." - -#: ../../standalone/drakgw_.c:243 -msgid "" -"Warning, the network adapter is already configured. I will reconfigure it." -msgstr "Upozorenje, mrežni adapter je već podešen. Sada ću ga rekonfigurisati." - -#: ../../standalone/drakgw_.c:254 -#, c-format -msgid "Potential LAN address conflict found in current config of %s!\n" -msgstr "" -"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n" - -#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268 -msgid "Firewalling configuration detected!" -msgstr "Otkrivena konfiguracija firewalla!" - -#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269 -msgid "" -"Warning! An existing firewalling configuration has been detected. You may " -"need some manual fix after installation." -msgstr "" -"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti " -"potrebno neko ručno podešavanje nakon instalacije." - -#: ../../standalone/drakgw_.c:277 -msgid "Configuring..." -msgstr "Podešavam..." - -#: ../../standalone/drakgw_.c:278 -msgid "Configuring scripts, installing software, starting servers..." -msgstr "Podešavam skripte, instaliram software, pokrećem servere..." - -#: ../../standalone/drakgw_.c:311 -#, c-format -msgid "Problems installing package %s" -msgstr "Problemi tokom instaliranja paketa %s" - -#: ../../standalone/drakgw_.c:600 -msgid "" -"Everything has been configured.\n" -"You may now share Internet connection with other computers on your Local " -"Area Network, using automatic network configuration (DHCP)." -msgstr "" -"Sve je konfigurisano.\n" -"Sada možete dijeliti Internet konekciju sa ostalim računarima na vašoj " -"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)." - -#: ../../standalone/drakgw_.c:617 -msgid "The setup has already been done, but it's currently disabled." -msgstr "Podešavanje je već završeno, ali je trenutno isključeno." - -#: ../../standalone/drakgw_.c:618 -msgid "The setup has already been done, and it's currently enabled." -msgstr "Podešavanje je već završeno i trenutno je uključeno." - -#: ../../standalone/drakgw_.c:619 -msgid "No Internet Connection Sharing has ever been configured." -msgstr "Dijeljenje Internet konekcije nije nikad podešeno." - -#: ../../standalone/drakgw_.c:624 -msgid "Internet connection sharing configuration" -msgstr "Podešavanje dijeljenja Internet konekcije" - -#: ../../standalone/drakgw_.c:631 -#, c-format -msgid "" -"Welcome to the Internet Connection Sharing utility!\n" -"\n" -"%s\n" -"\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"Dobrodošli u alat za Dijeljenje Internet konekcije!\n" -"\n" -"%s\n" -"\n" -"Kliknite na Podesi da pokrenete čarobnjak." - -#: ../../standalone/draknet_.c:79 -#, c-format -msgid "Network configuration (%d adapters)" -msgstr "Podešavanje mreže (%d adaptera)" - -#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573 -msgid "Profile: " -msgstr "Profil:" - -#: ../../standalone/draknet_.c:94 -msgid "Del profile..." -msgstr "Briši profil..." - -#: ../../standalone/draknet_.c:100 -msgid "Profile to delete:" -msgstr "Profil za brisanje:" - -#: ../../standalone/draknet_.c:128 -msgid "New profile..." -msgstr "Novi profil..." - -#: ../../standalone/draknet_.c:134 -msgid "" -"Name of the profile to create (the new profile is created as a copy of the " -"current one) :" -msgstr "" -"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija " -"postojećeg) :" - -#: ../../standalone/draknet_.c:160 -msgid "Hostname: " -msgstr "Hostname: " - -#: ../../standalone/draknet_.c:167 -msgid "Internet access" -msgstr "Pristup Internetu" - -#: ../../standalone/draknet_.c:180 -msgid "Type:" -msgstr "Tip:" - -#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397 -msgid "Gateway:" -msgstr "Gateway:" - -#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397 -msgid "Interface:" -msgstr "Interfejs:" - -#: ../../standalone/draknet_.c:192 -msgid "Status:" -msgstr "Status:" - -#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410 -msgid "Connected" -msgstr "Konektovan" - -#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410 -msgid "Not connected" -msgstr "Nije konektovan" - -#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411 -msgid "Connect..." -msgstr "Konektuj se..." - -#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411 -msgid "Disconnect..." -msgstr "Prekini konekciju..." - -#: ../../standalone/draknet_.c:215 -msgid "Starting your connection..." -msgstr "Pokrećem vašu konekciju..." - -#: ../../standalone/draknet_.c:223 -msgid "Closing your connection..." -msgstr "Zatvaram vašu konekciju..." - -#: ../../standalone/draknet_.c:228 -msgid "" -"The connection is not closed.\n" -"Try to do it manually by running\n" -"/etc/sysconfig/network-scripts/net_cnx_down\n" -"in root." -msgstr "" -"Konekcija nije zatvorena.\n" -"Probajte to učiniti ručno pokrećući\n" -"/etc/sysconfig/network-scripts/net_cnx_down\n" -"u rootu." - -#: ../../standalone/draknet_.c:231 -msgid "The system is now disconnected." -msgstr "Sistem je sada diskonektovan." - -#: ../../standalone/draknet_.c:243 -msgid "Configure Internet Access..." -msgstr "Podesi Internet pristup..." - -#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446 -msgid "LAN configuration" -msgstr "Podešavanje LANa" - -#: ../../standalone/draknet_.c:255 -msgid "Driver" -msgstr "Drajver" - -#: ../../standalone/draknet_.c:255 -msgid "Interface" -msgstr "Interfejs" - -#: ../../standalone/draknet_.c:255 -msgid "Protocol" -msgstr "Protokol" - -#: ../../standalone/draknet_.c:255 -msgid "State" -msgstr "Status" - -#: ../../standalone/draknet_.c:267 -msgid "Configure Local Area Network..." -msgstr "Podesi Lokalnu mrežu..." - -#: ../../standalone/draknet_.c:279 -msgid "Click here to launch the wizard ->" -msgstr "Kliknite ovdje za pokretanje čarobnjaka ->" - -#: ../../standalone/draknet_.c:306 -msgid "Apply" -msgstr "Primjeni" - -#: ../../standalone/draknet_.c:325 -msgid "Please Wait... Applying the configuration" -msgstr "Molimo sačekajte... Primjenjujem konfiguraciju" - -#: ../../standalone/draknet_.c:428 -msgid "" -"You don't have any configured interface.\n" -"Configure them first by clicking on 'Configure'" -msgstr "" -"Nemate nijedan podešen interfejs.\n" -"Podesite ih prvo klikajući na 'Podesi'" - -#: ../../standalone/draknet_.c:450 -msgid "LAN Configuration" -msgstr "Podešavanje LANa" - -#: ../../standalone/draknet_.c:457 -#, c-format -msgid "Adapter %s: %s" -msgstr "Adapter %s: %s" - -#: ../../standalone/draknet_.c:463 -msgid "Boot Protocol" -msgstr "Boot protokol" - -#: ../../standalone/draknet_.c:464 -msgid "Started on boot" -msgstr "Pokrenut na bootu" - -#: ../../standalone/draknet_.c:465 -msgid "DHCP client" -msgstr "DHCP klijent" - -#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491 -msgid "activate now" -msgstr "pokreni sada" - -#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491 -msgid "desactivate now" -msgstr "zaustavi sada" - -#: ../../standalone/draknet_.c:538 -msgid "" -"You don't have any internet connection.\n" -"Create one first by clicking on 'Configure'" -msgstr "" -"Nemate nijednu Internet konekciju.\n" -"Napravite jednu klikajući na 'Podesi'" - -#: ../../standalone/draknet_.c:562 -msgid "Internet connection configuration" -msgstr "Podešavanje Internet konekcije" - -#: ../../standalone/draknet_.c:566 -msgid "Internet Connection Configuration" -msgstr "Podešavanje Internet konekcije" - -#: ../../standalone/draknet_.c:575 -msgid "Connection type: " -msgstr "Tip konekcije: " - -#: ../../standalone/draknet_.c:581 -msgid "Parameters" -msgstr "Parametri" - -#: ../../standalone/draknet_.c:608 -msgid "Ethernet Card" -msgstr "Ethernet kartica" - -#: ../../standalone/draknet_.c:609 -msgid "DHCP Client" -msgstr "DHCP klijent" - -#: ../../standalone/draksec_.c:21 -msgid "Welcome To Crackers" -msgstr "Dobrodošli u Crackers" - -#: ../../standalone/draksec_.c:22 -msgid "Poor" -msgstr "Loš" - -#: ../../standalone/draksec_.c:26 -msgid "Paranoid" -msgstr "Paranoičan" - -#: ../../standalone/draksec_.c:29 -msgid "" -"This level is to be used with care. It makes your system more easy to use,\n" -"but very sensitive: it must not be used for a machine connected to others\n" -"or to the Internet. There is no password access." -msgstr "" -"Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,\n" -"ali vrlo osjetljivim: ne smije biti korišten za mašinu koja je spojena na\n" -"druge ili na Internet. Nema pristupa šifrom." - -#: ../../standalone/draksec_.c:32 -msgid "" -"Password are now enabled, but use as a networked computer is still not " -"recommended." -msgstr "" -"Šifra je sada aktivirana, ali korištenje za mrežni računar još nije " -"preporučeno." - -#: ../../standalone/draksec_.c:33 -msgid "" -"Few improvements for this security level, the main one is that there are\n" -"more security warnings and checks." -msgstr "" -"Nekoliko unaprijeđenja na ovom sigurnosnom nivou, glavni je da ima\n" -"više sigurnosnih upozorenja i provjera." - -#: ../../standalone/draksec_.c:35 -msgid "" -"This is the standard security recommended for a computer that will be used\n" -"to connect to the Internet as a client. There are now security checks. " -msgstr "" -"Ovo je standardna sigurnost koja je preporučena za računar koji će biti\n" -"korišten za spajanje na Internet kao klijent. Sada su uključene sigurnosne " -"provjere." - -#: ../../standalone/draksec_.c:37 -msgid "" -"With this security level, the use of this system as a server becomes " -"possible.\n" -"The security is now high enough to use the system as a server which accept\n" -"connections from many clients. " -msgstr "" -"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao " -"server.\n" -"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji " -"prima\n" -"konekcije sa mnogo klijenata." - -#: ../../standalone/draksec_.c:40 -msgid "" -"We take level 4 features, but now the system is entirely closed.\n" -"Security features are at their maximum." -msgstr "" -"Koristimo osobine nivoa 4, ali sada je sistem potpuno zatvoren.\n" -"Sigurnosne osobine na maksimumu." - -#: ../../standalone/draksec_.c:65 -msgid "Security level" -msgstr "Nivo sigurnosti" - -#: ../../standalone/draksec_.c:67 -msgid "Use libsafe for servers" -msgstr "Koristi libsafe za servere" - -#: ../../standalone/draksec_.c:68 -msgid "" -"A library which defends against buffer overflow and format string attacks." -msgstr "" -"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"." - -#: ../../standalone/draksec_.c:72 -msgid "Setting security level" -msgstr "Podešavanje nivoa sigurnosti" - -#: ../../standalone/drakxconf_.c:47 -msgid "Control Center" -msgstr "Kontrolni centar" - -#: ../../standalone/drakxconf_.c:48 -msgid "Choose the tool you want to use" -msgstr "Izaberite alat koji želite koristiti" - -#: ../../standalone/keyboarddrake_.c:16 -msgid "usage: keyboarddrake [--expert] [keyboard]\n" -msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n" - -#: ../../standalone/keyboarddrake_.c:36 -msgid "Do you want the BackSpace to return Delete in console?" -msgstr "Želite li da BackSpace vrati Delete u konzoli?" - -#: ../../standalone/livedrake_.c:23 -msgid "Change Cd-Rom" -msgstr "Promjenite CD-ROM" - -#: ../../standalone/livedrake_.c:24 -msgid "" -"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid live upgrade." -msgstr "" -"Molimo ubacite Instalacioni CD-ROM u vaš drajv i pritisnite Ok kad ste " -"spremni.\n" -"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade." - -#: ../../standalone/livedrake_.c:34 -msgid "Unable to start live upgrade !!!\n" -msgstr "Ne mogu da pokrenem live upgrade !!!\n" - -#: ../../standalone/mousedrake_.c:58 -msgid "no serial_usb found\n" -msgstr "nije pronađen serial_usb\n" - -#: ../../standalone/mousedrake_.c:62 -msgid "Emulate third button?" -msgstr "Emuliraj treće dugme?" - -#: ../../standalone/tinyfirewall_.c:29 -msgid "Firewalling Configuration" -msgstr "Podešavanje firewalla" - -#: ../../standalone/tinyfirewall_.c:42 -msgid "Firewalling configuration" -msgstr "Podešavanje firewalla" - -#: ../../standalone/tinyfirewall_.c:77 -msgid "" -"Firewalling\n" -"\n" -"You already have set up a firewall.\n" -"Click on Configure to change or remove the firewall" -msgstr "" -"Firewall\n" -"\n" -"Već ste podesili firewall.\n" -"Kliknite na Podesi kako bi se izmjenio ili uklonio firewall" - -#: ../../standalone/tinyfirewall_.c:81 -msgid "" -"Firewalling\n" -"\n" -"Click on Configure to set up a standard firewall" -msgstr "" -"Firewall\n" -"\n" -"Kliknite na Podesi za podešavanje standardnog firewalla" - -#: ../../steps.pm_.c:14 -msgid "Choose your language" -msgstr "Izaberite svoj jezik" - -#: ../../steps.pm_.c:15 -msgid "Select installation class" -msgstr "Izaberite klasu instalacije" - -#: ../../steps.pm_.c:16 -msgid "Hard drive detection" -msgstr "Prepoznavanje hard diska" - -#: ../../steps.pm_.c:17 -msgid "Configure mouse" -msgstr "Podešavanje miša" - -#: ../../steps.pm_.c:18 -msgid "Choose your keyboard" -msgstr "Izaberite vašu tastaturu" - -#: ../../steps.pm_.c:19 -msgid "Security" -msgstr "Sigurnost" - -#: ../../steps.pm_.c:20 -msgid "Setup filesystems" -msgstr "Podešavanje datotečnih sistema" - -#: ../../steps.pm_.c:21 -msgid "Format partitions" -msgstr "Formatiranje particija" - -#: ../../steps.pm_.c:22 -msgid "Choose packages to install" -msgstr "Izaberite pakete za instalaciju" - -#: ../../steps.pm_.c:23 -msgid "Install system" -msgstr "Sistem instalacije" - -#: ../../steps.pm_.c:25 -msgid "Add a user" -msgstr "Dodajte korisnika" - -#: ../../steps.pm_.c:26 -msgid "Configure networking" -msgstr "Podešavanje mreže" - -#: ../../steps.pm_.c:28 -msgid "Configure services" -msgstr "Podešavanje servisa" - -#: ../../steps.pm_.c:30 -msgid "Create a bootdisk" -msgstr "Napravite boot disketu" - -#: ../../steps.pm_.c:32 -msgid "Install bootloader" -msgstr "Instalacija bootloadera" - -#: ../../steps.pm_.c:33 -msgid "Configure X" -msgstr "Podešavanje X" - -#: ../../steps.pm_.c:34 -msgid "Exit install" -msgstr "Napusti instalaciju" - -#: ../../tinyfirewall.pm_.c:9 -msgid "" -"tinyfirewall configurator\n" -"\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" -"tinyfirewall podešavač\n" -"\n" -"On podešava lični firewall za ovu Mandrake Linux mašinu.\n" -"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n" -"specijaliziranu MandrakeSecurity Firewall distribuciju." - -#: ../../tinyfirewall.pm_.c:14 -msgid "" -"We'll now ask you questions about which services you'd like to allow\n" -"the Internet to connect to. Please think carefully about these\n" -"questions, as your computer's security is important.\n" -"\n" -"Please, if you're not currently using one of these services, firewall\n" -"it off. You can change this configuration anytime you like by\n" -"re-running this application!" -msgstr "" -"Sada ćemo vam postaviti pitanja o servisima kojima želite dozvoliti\n" -"pristup sa Interneta. Molimo razmislite pažljivo o ovim pitanjima,\n" -"jer je sigurnost vašeg računara bitna.\n" -"\n" -"Molimo vas, ako trenutno ne koristite neki od ovih servisa, isključite\n" -"ga firewallom. Možete izmjeniti ove postavke kad god želite ponovnim\n" -"pokretanjem ove aplikacije!" - -#: ../../tinyfirewall.pm_.c:21 -msgid "" -"Are you running a web server on this machine that you need the whole\n" -"Internet to see? If you are running a webserver that only needs to be\n" -"accessed by this machine, you can safely answer NO here.\n" -"\n" -msgstr "" -"Da li imate pokrenut web server na ovoj mašini za koji želite da ga\n" -"cijeli Internet vidi? Ako imate pokrenut webserver kojem ćete pristupati\n" -"samo sa ove mašine, možete slobodno ovdje odgovoriti NE.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:26 -msgid "" -"Are you running a name server on this machine? If you didn't set one\n" -"up to give away IP and zone information to the whole Internet, please\n" -"answer no.\n" -"\n" -msgstr "" -"Da li imate pokrenut name server (DNS) na ovoj mašini? Ako niste\n" -"podesili DNS radi davanja informacija o IP i zoni cijelom Internetu, \n" -"molimo vas odgovorite ne.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:31 -msgid "" -"Do you want to allow incoming Secure Shell (ssh) connections? This\n" -"is a telnet-replacement that you might use to login. If you're using\n" -"telnet now, you should definitely switch to ssh. telnet is not\n" -"encrypted -- so some attackers can steal your password if you use\n" -"it. ssh is encrypted and doesn't allow for this eavesdropping." -msgstr "" -"Da li želite da dozvolite ulazne Secure Shell (ssh) konekcije? Ovo\n" -"je zamjena za telnet koju možete koristiti za prijavu. Ako sada koristite\n" -"telnet, definitivno trebate preći na ssh. Telnet nije kriptovan, tako\n" -"da neki napadači mogu ukrasti vašu šifru ako ga koristite. ssh je\n" -"kriptovan i ne dozvoljava ovo prisluškivanje." - -#: ../../tinyfirewall.pm_.c:36 -msgid "" -"Do you want to allow incoming telnet connections?\n" -"This is horribly unsafe, as we explained in the previous screen. We\n" -"strongly recommend answering No here and using ssh in place of\n" -"telnet.\n" -msgstr "" -"Da li želite dozvoliti ulazne telnet konekcije?\n" -"Ovo je užasno nesigurno, kao što je objašnjeno na prethodnom\n" -"ekranu. Strogo preporučujemo da odgovorite Ne ovdje i koristite\n" -"ssh umjesto telneta.\n" - -#: ../../tinyfirewall.pm_.c:41 -msgid "" -"Are you running an FTP server here that you need accessible to the\n" -"Internet? If you are, we strongly recommend that you only use it for\n" -"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" -"attackers, since FTP also uses no encryption for transferring passwords.\n" -msgstr "" -"Da li imate pokrenut FTP server za koji želite da je pristupačan sa\n" -"Interneta? Ako da, onda strogo preporučujemo da ga koristite samo\n" -"za anonimne transfere. Bilo koju šifru koja je poslana putem FTPa\n" -"mogu ukrasti napadači, pošto FTP također ne koristi kriptovanje.\n" - -#: ../../tinyfirewall.pm_.c:46 -msgid "" -"Are you running a mail server here? If you're sending you \n" -"messages through pine, mutt or any other text-based mail client,\n" -"you probably are. Otherwise, you should firewall this off.\n" -"\n" -msgstr "" -"Da li imate pokrenut mail server ovdje? Ako šaljete poruke\n" -"kroz pine, mutt ili neki drugi tekst-bazirani mail klijent, onda\n" -"vjerovatno imate. U suprotnom, trebali biste isključiti ovo \n" -"firewallom.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:51 -msgid "" -"Are you running a POP or IMAP server here? This would\n" -"be used to host non-web-based mail accounts for people via \n" -"this machine.\n" -"\n" -msgstr "" -"Da li imate pokrenut POP ili IMAP server ovdje? Ovo bi\n" -"bilo korišteno za smještaj ne-web-baziranih mail naloga\n" -"za ljude na ovoj mašini.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:56 -msgid "" -"You appear to be running a 2.2 kernel. If your network IP\n" -"is automatically set by a computer in your home or office \n" -"(dynamically assigned), we need to allow for this. Is\n" -"this the case?\n" -msgstr "" -"Čini se da koristite 2.2 kernel. Ako je vaša mrežna IP\n" -"automatski podešena putem računara u vašoj kući ili\n" -"uredu (dinamički dodjeljena), moramo ovo dozvoliti. Da\n" -"li je ovo slučaj?\n" - -#: ../../tinyfirewall.pm_.c:61 -msgid "" -"Is your computer getting time syncronized to another computer?\n" -"Mostly, this is used by medium-large Unix/Linux organizations\n" -"to synchronize time for logging and such. If you're not part\n" -"of a larger office and haven't heard of this, you probably \n" -"aren't." -msgstr "" -"Da li vaš računar sinhronizuje vrijeme sa drugim računarom?\n" -"Najčešće, ovo se koristi u srednje velikim Unix/Linux organizacijama\n" -"za sinhronizaciju vremena za pravljenje dnevnika i slično. Ako\n" -"niste dio većeg ureda i niste čuli za ovo, onda vjerovatno\n" -"ovo nije slučaj." - -#: ../../tinyfirewall.pm_.c:66 -msgid "" -"Configuration complete. May we write these changes to disk?\n" -"\n" -"\n" -"\n" -msgstr "" -"Podešavanje završeno. Možemo li zapisati ove izmjene na disk?\n" -"\n" -"\n" -"\n" - -#: ../../tinyfirewall.pm_.c:82 -#, c-format -msgid "Can't open %s: %s\n" -msgstr "Ne mogu otvoriti %s: %s\n" - -#: ../../tinyfirewall.pm_.c:84 -#, c-format -msgid "Can't open %s for writing: %s\n" -msgstr "Ne mogu otvoriti %s za pisanje: %s\n" - -#: ../../share/compssUsers:999 -msgid "Web/FTP" -msgstr "Web/FTP" - -#: ../../share/compssUsers:999 -msgid "Network Computer (client)" -msgstr "Mrežni računar (klijent)" - -#: ../../share/compssUsers:999 -msgid "NFS server, SMB server, Proxy server, ssh server" -msgstr "NFS server, SMB server, Proxy server, ssh server" - -#: ../../share/compssUsers:999 -msgid "Office" -msgstr "Ured" - -#: ../../share/compssUsers:999 -msgid "Gnome Workstation" -msgstr "Gnome Radna stanica" - -#: ../../share/compssUsers:999 -msgid "Tools for your Palm Pilot or your Visor" -msgstr "Alati za vaš Palm Pilot ili Visor" - -#: ../../share/compssUsers:999 -msgid "Workstation" -msgstr "Radna stanica" - -#: ../../share/compssUsers:999 -msgid "Firewall/Router" -msgstr "Firewall/Router" - -#: ../../share/compssUsers:999 -msgid "Domain Name and Network Information Server" -msgstr "Domain Name i Network Information Server" - -#: ../../share/compssUsers:999 -msgid "" -"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " -"gnumeric), pdf viewers, etc" -msgstr "" -"Uredski programi: obrada teksta (kword, abiword), tablični alati (kspread, " -"gnumeric), pdf preglednici itd." - -#: ../../share/compssUsers:999 -msgid "Audio-related tools: mp3 or midi players, mixers, etc" -msgstr "Alati vezani za zvuk: mp3 ili midi playeri, mixeri itd." - -#: ../../share/compssUsers:999 -msgid "Books and Howto's on Linux and Free Software" -msgstr "Knjige i Howto-i na temu Linuxa i Slobodnog Software-a" - -#: ../../share/compssUsers:999 -msgid "KDE Workstation" -msgstr "KDE Radna stanica" - -#: ../../share/compssUsers:999 -msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" -msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd." - -#: ../../share/compssUsers:999 -msgid "Multimedia - Video" -msgstr "Multimedija - Video" - -#: ../../share/compssUsers:999 -msgid "Set of tools for mail, news, web, file transfer, and chat" -msgstr "Skup alata za mail, news, web, prenos datoteka i chat" - -#: ../../share/compssUsers:999 -msgid "Database" -msgstr "Baze podataka" - -#: ../../share/compssUsers:999 -msgid "PostgreSQL or MySQL database server" -msgstr "PostgreSQL ili MySQL baza podataka" - -#: ../../share/compssUsers:999 -msgid "Tools to ease the configuration of your computer" -msgstr "Alati za lakše podešavanje računara" - -#: ../../share/compssUsers:999 -msgid "Multimedia - Sound" -msgstr "Multimedija - Zvuk" - -#: ../../share/compssUsers:999 -msgid "Utilities" -msgstr "Korisni programi" - -#: ../../share/compssUsers:999 -msgid "Documentation" -msgstr "Dokumentacija" - -#: ../../share/compssUsers:999 -msgid "Console Tools" -msgstr "Alati za konzolu" - -#: ../../share/compssUsers:999 -msgid "Postfix mail server, Inn news server" -msgstr "Postfix mail server, Inn news server" - -#: ../../share/compssUsers:999 -msgid "Internet station" -msgstr "Internet stanica" - -#: ../../share/compssUsers:999 -msgid "Multimedia station" -msgstr "Multimedijalna stanica" - -#: ../../share/compssUsers:999 -msgid "Configuration" -msgstr "Podešavanje" - -#: ../../share/compssUsers:999 -msgid "More Graphical Desktops (Gnome, IceWM)" -msgstr "Druge grafičke okoline (Gnome, IceWM)" - -#: ../../share/compssUsers:999 -msgid "" -"The K Desktop Environment, the basic graphical environment with a collection " -"of accompanying tools" -msgstr "" -"K Desktop Environment, osnovno grafičko okruženje sa izborom pratećih alata" - -#: ../../share/compssUsers:999 -msgid "Graphical Environment" -msgstr "Grafičko okruženje" - -#: ../../share/compssUsers:999 -msgid "Development" -msgstr "Razvoj" - -#: ../../share/compssUsers:999 -msgid "Apache, Pro-ftpd" -msgstr "Apache, Pro-ftpd" - -#: ../../share/compssUsers:999 -msgid "Tools to create and burn CD's" -msgstr "Alati za pravljenje i prženje CDova" - -#: ../../share/compssUsers:999 -msgid "Office Workstation" -msgstr "Uredska radna stanica" - -#: ../../share/compssUsers:999 -msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" -msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd." - -#: ../../share/compssUsers:999 -msgid "Graphics programs such as The Gimp" -msgstr "Grafički programi kao što je Gimp" - -#: ../../share/compssUsers:999 -msgid "DNS/NIS " -msgstr "DNS/NIS " - -#: ../../share/compssUsers:999 -msgid "C and C++ development libraries, programs and include files" -msgstr "C i C++ razvojne biblioteke, programi i include datoteke" - -#: ../../share/compssUsers:999 -msgid "Network Computer server" -msgstr "Network Computer server" - -#: ../../share/compssUsers:999 -msgid "Mail/Groupware/News" -msgstr "Mail/Groupware/News" - -#: ../../share/compssUsers:999 -msgid "Game station" -msgstr "Stanica za igru" - -#: ../../share/compssUsers:999 -msgid "Video players and editors" -msgstr "Video playeri i editori" - -#: ../../share/compssUsers:999 -msgid "Multimedia - Graphics" -msgstr "Multimedija - Grafika" - -#: ../../share/compssUsers:999 -msgid "Amusement programs: arcade, boards, strategy, etc" -msgstr "Zabavni programi: arkadne igre, igre za tablu, strategije itd." - -#: ../../share/compssUsers:999 -msgid "" -"Set of tools to read and send mail and news (pine, mutt, tin..) and to " -"browse the Web" -msgstr "" -"Skup alata za čitanje i slanje pošte i news-a (pine, mutt, tin...) i " -"pregledanje Weba" - -#: ../../share/compssUsers:999 -msgid "Archiving, emulators, monitoring" -msgstr "Arhiviranje, emulatori, nadzor" - -#: ../../share/compssUsers:999 -msgid "Personal Finance" -msgstr "Lične finansije" - -#: ../../share/compssUsers:999 -msgid "" -"A graphical environment with user-friendly set of applications and desktop " -"tools" -msgstr "" -"Grafički okoliš sa skupom korisnički orjentisanih aplikacija i alata za " -"radnu površinu" - -#: ../../share/compssUsers:999 -msgid "Clients for different protocols including ssh" -msgstr "Klijenti za razne protokole uključujući ssh" - -#: ../../share/compssUsers:999 -msgid "Internet gateway" -msgstr "Internet gateway" - -#: ../../share/compssUsers:999 -msgid "Sound and video playing/editing programs" -msgstr "Programi za pregled i editovanje zvuka i videa" - -#: ../../share/compssUsers:999 -msgid "Other Graphical Desktops" -msgstr "Ostale grafičke okoline" - -#: ../../share/compssUsers:999 -msgid "Editors, shells, file tools, terminals" -msgstr "Editori, ljuske, datotečni alati, terminali" - -#: ../../share/compssUsers:999 -msgid "Programs to manage your finance, such as gnucash" -msgstr "Programi za upravljanje vašim finansijama, kao što je gnucash" - -#: ../../share/compssUsers:999 -msgid "Games" -msgstr "Igre" - -#: ../../share/compssUsers:999 -msgid "Personal Information Management" -msgstr "Upravljanje ličnim informacijama" - -#: ../../share/compssUsers:999 -msgid "Multimedia - CD Burning" -msgstr "Multimedija - Prženje CDa" - -#: ../../share/compssUsers:999 -msgid "Scientific Workstation" -msgstr "Znanstvena radna stanica" - |