diff options
Diffstat (limited to 'perl-install/share/po/DrakX.pot')
| -rw-r--r-- | perl-install/share/po/DrakX.pot | 19782 |
1 files changed, 7078 insertions, 12704 deletions
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot index 0279a08ec..5b960dac5 100644 --- a/perl-install/share/po/DrakX.pot +++ b/perl-install/share/po/DrakX.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2004-01-06 15:46+0100\n" +"POT-Creation-Date: 2002-12-05 19:52+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -14,4319 +14,2896 @@ msgstr "" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Scanning partitions to find mount points" +#: ../../Xconfig/card.pm_.c:16 +msgid "256 kB" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of suid root files." +#: ../../Xconfig/card.pm_.c:17 +msgid "512 kB" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n" -"" +#: ../../Xconfig/card.pm_.c:18 +msgid "1 MB" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Configuration changed - restart clusternfs/dhcpd?" +#: ../../Xconfig/card.pm_.c:19 +msgid "2 MB" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t\tErase=%s" +#: ../../Xconfig/card.pm_.c:20 +msgid "4 MB" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Differential backups only save files that have changed or are new since the original 'base' backup." +#: ../../Xconfig/card.pm_.c:21 +msgid "8 MB" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "network printer port" +#: ../../Xconfig/card.pm_.c:22 +msgid "16 MB" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Please insert floppy disk:" +#: ../../Xconfig/card.pm_.c:23 +msgid "32 MB" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "DrakTermServ" +#: ../../Xconfig/card.pm_.c:24 +msgid "64 MB or more" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "PCMCIA" +#: ../../Xconfig/card.pm_.c:203 +msgid "Choose a X server" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"The backup partition table has not the same size\n" -"Still continue?" +#: ../../Xconfig/card.pm_.c:203 +msgid "X server" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Which username" +#: ../../Xconfig/card.pm_.c:230 +msgid "Multi-head configuration" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../Xconfig/card.pm_.c:231 msgid "" -"Iwpriv enable to set up optionals (private) parameters of a wireless network\n" -"interface.\n" -"\n" -"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n" -"iwconfig which deals with generic ones).\n" -"\n" -"In theory, the documentation of each device driver should indicate how to use\n" -"those interface specific commands and their effect.\n" -"\n" -"See iwpriv(8) man page for further information." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Which type of entry do you want to add?" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Restore partition table" +"Your system support multiple head configuration.\n" +"What do you want to do?" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Configure hostname..." +#: ../../Xconfig/card.pm_.c:288 +msgid "Select the memory size of your graphics card" msgstr "" -#: ../../printer/cups.pm:1 -#, c-format -msgid "On CUPS server \"%s\"" +#: ../../Xconfig/card.pm_.c:349 +msgid "XFree configuration" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Post-install configuration" +#: ../../Xconfig/card.pm_.c:351 +msgid "Which configuration of XFree do you want to have?" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``%s'' instead" +#: ../../Xconfig/card.pm_.c:383 +msgid "Configure all heads independently" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Type" +#: ../../Xconfig/card.pm_.c:384 +msgid "Use Xinerama extension" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm_.c:389 #, c-format -msgid "" -"\n" -"Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred." +msgid "Configure only card \"%s\"%s" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402 +#: ../../Xconfig/various.pm_.c:23 #, c-format -msgid "Repeater" +msgid "XFree %s" msgstr "" -#: ../../lang.pm:1 +#: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439 +#: ../../Xconfig/various.pm_.c:23 #, c-format -msgid "Sri Lanka" +msgid "XFree %s with 3D hardware acceleration" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm_.c:416 #, c-format msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Central African Republic" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Gateway device" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Advanced preferences" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Net Method:" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Ethernetcard" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "If set, send the mail report to this email address else send it to root" -msgstr "" - -#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Parameters" -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "no" -msgstr "" - -#: ../../harddrake/v4l.pm:1 ../../harddrake/v4l.pm:1 -#, c-format -msgid "Auto-detect" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Select installation class" +"Your card can have 3D hardware acceleration support but only with XFree %s.\n" +"Your card is supported by XFree %s which may have a better support in 2D." msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 +#: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441 #, c-format -msgid "Interface:" +msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447 #, c-format -msgid "" -"The system doesn't seem to be connected to the Internet.\n" -"Try to reconfigure your connection." +msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm_.c:429 #, c-format msgid "" -"Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n" -"\n" -"Do you really want to continue setting up this printer as you are doing now?" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Belarus" -msgstr "" - -#: ../../partition_table.pm:1 -#, c-format -msgid "Error writing to file %s" +"Your card can have 3D hardware acceleration support but only with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" +"Your card is supported by XFree %s which may have a better support in 2D." msgstr "" -#: ../../services.pm:1 +#: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449 #, c-format msgid "" -"apmd is used for monitoring battery status and logging it via syslog.\n" -"It can also be used for shutting down the machine when the battery is low." -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report check result to syslog" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use tape to backup" +"Your card can have 3D hardware acceleration support with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be installed" +#: ../../Xconfig/card.pm_.c:455 +msgid "Xpmac (installation display driver)" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Here, one can configure some extra wireless parameters such as:\n" -"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n" -"\n" -"See iwpconfig(8) man page for further information." +#: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 +#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961 +msgid "Custom" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "CUPS configuration" +#: ../../Xconfig/main.pm_.c:102 +msgid "Graphic Card" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Total progress" +#: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 +msgid "Monitor" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Not enough free space to allocate new partitions" +#: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210 +msgid "Resolution" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving" +#: ../../Xconfig/main.pm_.c:113 +msgid "Test" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via %s:\n" -"\n" -"" +#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 +#: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25 +#: ../../diskdrake/smbnfs_gtk.pm_.c:86 +msgid "Options" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "yes" +#: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269 +#: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274 +#: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 +#: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104 +#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 +#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 +#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 +#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181 +#: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015 +#: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435 +#: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949 +msgid "Ok" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "(" +#: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 +#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114 +#: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204 +msgid "Quit" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" -"Welcome to The Network Configuration Wizard.\n" +"Keep the changes?\n" +"The current configuration is:\n" "\n" -"We are about to configure your internet/network connection.\n" -"If you don't want to use the auto detection, deselect the checkbox.\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, c-format -msgid ")" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Lebanon" +"%s" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "MM HitTablet" +#: ../../Xconfig/monitor.pm_.c:93 +msgid "Choose a monitor" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Stop" +#: ../../Xconfig/monitor.pm_.c:97 +msgid "Plug'n Play" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Edit selected host" +#: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 +msgid "Generic" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD device defined!" +#: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67 +#: ../../standalone/harddrake2_.c:68 +msgid "Vendor" msgstr "" -#: ../../network/shorewall.pm:1 -#, c-format -msgid "" -"Please enter the name of the interface connected to the internet. \n" -" \n" -"Examples:\n" -" ppp+ for modem or DSL connections, \n" -" eth0, or eth1 for cable connection, \n" -" ippp+ for a isdn connection.\n" -"" +#: ../../Xconfig/monitor.pm_.c:109 +msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../Xconfig/monitor.pm_.c:114 msgid "" -"\tUse .backupignore files\n" -"" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (phonetic)" -msgstr "" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "The DHCP start ip" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "256 kB" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Don't rewind tape after backup" -msgstr "" - -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "Bootloader main options" -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]" -msgstr "" - -#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Tape" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Malaysia" +"The two critical parameters are the vertical refresh rate, which is the " +"rate\n" +"at which the whole screen is refreshed, and most importantly the horizontal\n" +"sync rate, which is the rate at which scanlines are displayed.\n" +"\n" +"It is VERY IMPORTANT that you do not specify a monitor type with a sync " +"range\n" +"that is beyond the capabilities of your monitor: you may damage your " +"monitor.\n" +" If in doubt, choose a conservative setting." msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning network..." +#: ../../Xconfig/monitor.pm_.c:121 +msgid "Horizontal refresh rate" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"With this option you will be able to restore any version\n" -" of your /etc directory." +#: ../../Xconfig/monitor.pm_.c:122 +msgid "Vertical refresh rate" msgstr "" -#: ../../standalone/drakedm:1 -#, c-format -msgid "The change is done, do you want to restart the dm service ?" +#: ../../Xconfig/resolution_and_depth.pm_.c:12 +msgid "256 colors (8 bits)" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (French layout)" +#: ../../Xconfig/resolution_and_depth.pm_.c:13 +msgid "32 thousand colors (15 bits)" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Other place" +#: ../../Xconfig/resolution_and_depth.pm_.c:14 +msgid "65 thousand colors (16 bits)" msgstr "" -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed (maybe raidtools are missing?)" +#: ../../Xconfig/resolution_and_depth.pm_.c:15 +msgid "16 million colors (24 bits)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "August" +#: ../../Xconfig/resolution_and_depth.pm_.c:16 +msgid "4 billion colors (32 bits)" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "FTP server" +#: ../../Xconfig/resolution_and_depth.pm_.c:130 +msgid "Resolutions" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Webcam" +#: ../../Xconfig/resolution_and_depth.pm_.c:255 +msgid "Choose the resolution and the color depth" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../Xconfig/resolution_and_depth.pm_.c:256 #, c-format -msgid "size of the (second level) cpu cache" +msgid "Graphics card: %s" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Soundcard" +#: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001 +#: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87 +#: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463 +#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345 +#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194 +#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 +#: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 +#: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055 +#: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198 +#: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907 +#: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960 +#: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047 +#: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104 +#: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112 +#: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286 +#: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677 +#: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918 +#: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204 +#: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295 +#: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438 +#: ../../ugtk2.pm_.c:926 +msgid "Cancel" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Month" +#: ../../Xconfig/test.pm_.c:29 +msgid "Test of the configuration" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Search for files to restore" +#: ../../Xconfig/test.pm_.c:30 +msgid "Do you want to test the configuration?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Luxembourg" +#: ../../Xconfig/test.pm_.c:30 +msgid "Warning: testing this graphic card may freeze your computer" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../Xconfig/various.pm_.c:29 #, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s <file>\".\n" -"" +msgid "Keyboard layout: %s\n" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../Xconfig/various.pm_.c:30 #, c-format -msgid "" -"Level %s\n" -"" +msgid "Mouse type: %s\n" msgstr "" -#: ../../keyboard.pm:1 +#: ../../Xconfig/various.pm_.c:31 #, c-format -msgid "Syriac (phonetic)" +msgid "Mouse device: %s\n" msgstr "" -#: ../../lang.pm:1 +#: ../../Xconfig/various.pm_.c:32 #, c-format -msgid "Iran" +msgid "Monitor: %s\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../Xconfig/various.pm_.c:33 #, c-format -msgid "Bus" +msgid "Monitor HorizSync: %s\n" msgstr "" -#: ../../lang.pm:1 +#: ../../Xconfig/various.pm_.c:34 #, c-format -msgid "Iraq" +msgid "Monitor VertRefresh: %s\n" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../Xconfig/various.pm_.c:35 #, c-format -msgid "connecting to %s ..." +msgid "Graphics card: %s\n" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../Xconfig/various.pm_.c:36 #, c-format -msgid "" -"Potential LAN address conflict found in current config of %s!\n" -"" +msgid "Graphics memory: %s kB\n" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../Xconfig/various.pm_.c:38 #, c-format -msgid "Configuring..." +msgid "Color depth: %s\n" msgstr "" -#: ../../harddrake/v4l.pm:1 +#: ../../Xconfig/various.pm_.c:39 #, c-format -msgid "" -"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n" -"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed." +msgid "Resolution: %s\n" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../Xconfig/various.pm_.c:41 #, c-format -msgid "Password (again)" +msgid "XFree86 server: %s\n" msgstr "" -#: ../../standalone/drakfont:1 +#: ../../Xconfig/various.pm_.c:42 #, c-format -msgid "Search installed fonts" +msgid "XFree86 driver: %s\n" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Default desktop" +#: ../../Xconfig/various.pm_.c:61 +msgid "Graphical interface at startup" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format +#: ../../Xconfig/various.pm_.c:62 msgid "" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on %s\n" -" where you'll find a form to fill in. The information displayed above will be \n" -"transferred to that server." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Venezuela" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakups:1 -#, c-format -msgid "IP address" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Choose the sizes" +"I can setup your computer to automatically start the graphical interface " +"(XFree) upon booting.\n" +"Would you like XFree to start when you reboot?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../Xconfig/various.pm_.c:73 msgid "" -"List of data corrupted:\n" +"Your graphic card seems to have a TV-OUT connector.\n" +"It can be configured to work using frame-buffer.\n" "\n" -"" -msgstr "" - -#: ../../fs.pm:1 -#, c-format -msgid "" -"Can only be mounted explicitly (i.e.,\n" -"the -a option will not cause the file system to be mounted)." +"For this you have to plug your graphic card to your TV before booting your " +"computer.\n" +"Then choose the \"TVout\" entry in the bootloader\n" +"\n" +"Do you have this feature?" msgstr "" -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Your modem isn't supported by the system.\n" -"Take a look at http://www.linmodems.org" +#: ../../Xconfig/various.pm_.c:85 +msgid "What norm is your TV using?" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose another partition" +#: ../../any.pm_.c:107 ../../any.pm_.c:132 +msgid "First sector of boot partition" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Current user" +#: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209 +msgid "First sector of drive (MBR)" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Username" +#: ../../any.pm_.c:111 +msgid "SILO Installation" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Left \"Windows\" key" +#: ../../any.pm_.c:112 ../../any.pm_.c:125 +msgid "Where do you want to install the bootloader?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Guyana" +#: ../../any.pm_.c:124 +msgid "LILO/grub Installation" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Server Configuration" +#: ../../any.pm_.c:136 ../../any.pm_.c:150 +msgid "SILO" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Used for directory:\n" -" only owner of directory or file in this directory can delete it" +#: ../../any.pm_.c:138 +msgid "LILO with text menu" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid " on Novell server \"%s\", printer \"%s\"" +#: ../../any.pm_.c:139 ../../any.pm_.c:150 +msgid "LILO with graphical menu" msgstr "" -#: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Printer Name" +#: ../../any.pm_.c:142 +msgid "Grub" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Setting up USB key" +#: ../../any.pm_.c:146 +msgid "Boot from DOS/Windows (loadlin)" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Remove a module" +#: ../../any.pm_.c:148 ../../any.pm_.c:150 +msgid "Yaboot" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakups:1 -#, c-format -msgid "Password" +#: ../../any.pm_.c:158 ../../any.pm_.c:189 +msgid "Bootloader main options" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Advanced Configuration" +#: ../../any.pm_.c:159 ../../any.pm_.c:190 +msgid "Bootloader to use" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Scanning on your HP multi-function device" +#: ../../any.pm_.c:161 +msgid "Bootloader installation" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "Root" +#: ../../any.pm_.c:163 ../../any.pm_.c:192 +msgid "Boot device" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing RAID to add to" +#: ../../any.pm_.c:164 +msgid "Compact" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (modern \"Q\" model)" +#: ../../any.pm_.c:164 +msgid "compact" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"Automatic regeneration of kernel header in /boot for\n" -"/usr/include/linux/{autoconf,version}.h" +#: ../../any.pm_.c:165 ../../any.pm_.c:289 +msgid "Video mode" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo message not found" +#: ../../any.pm_.c:167 +msgid "Delay before booting default image" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "if needed" +#: ../../any.pm_.c:169 ../../any.pm_.c:772 +#: ../../diskdrake/smbnfs_gtk.pm_.c:179 +#: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71 +#: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916 +#: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622 +#: ../../standalone/drakconnect_.c:647 +msgid "Password" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Failed..." +#: ../../any.pm_.c:170 ../../any.pm_.c:773 +#: ../../install_steps_interactive.pm_.c:1078 +msgid "Password (again)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Store the password for this system in drakbackup configuration." +#: ../../any.pm_.c:171 +msgid "Restrict command line options" msgstr "" -#: ../../install_messages.pm:1 -#, c-format -msgid "" -"Introduction\n" -"\n" -"The operating system and the different components available in the Mandrake Linux distribution \n" -"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n" -"restricted to, the set of programs, methods, rules and documentation related to the operating \n" -"system and the different components of the Mandrake Linux distribution.\n" -"\n" -"\n" -"1. License Agreement\n" -"\n" -"Please read this document carefully. This document is a license agreement between you and \n" -"MandrakeSoft S.A. which applies to the Software Products.\n" -"By installing, duplicating or using the Software Products in any manner, you explicitly \n" -"accept and fully agree to conform to the terms and conditions of this License. \n" -"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n" -"the Software Products. \n" -"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n" -"with the terms and conditions of this License is void and will terminate your rights under this \n" -"License. Upon termination of the License, you must immediately destroy all copies of the \n" -"Software Products.\n" -"\n" -"\n" -"2. Limited Warranty\n" -"\n" -"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n" -"extent permitted by law.\n" -"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n" -"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n" -"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n" -"judgment, or any other consequential loss) arising out of the use or inability to use the Software \n" -"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n" -"damages.\n" -"\n" -"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n" -"\n" -"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n" -"liable for any special, incidental, direct or indirect damages whatsoever (including without \n" -"limitation damages for loss of business, interruption of business, financial loss, legal fees \n" -"and penalties resulting from a court judgment, or any other consequential loss) arising out \n" -"of the possession and use of software components or arising out of downloading software components \n" -"from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.\n" -"This limited liability applies to, but is not restricted to, the strong cryptography components \n" -"included in the Software Products.\n" -"\n" -"\n" -"3. The GPL License and Related Licenses\n" -"\n" -"The Software Products consist of components created by different persons or entities. Most \n" -"of these components are governed under the terms and conditions of the GNU General Public \n" -"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n" -"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n" -"and conditions of the license agreement for each component before using any component. Any question \n" -"on a component license should be addressed to the component author and not to MandrakeSoft.\n" -"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n" -"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n" -"further details.\n" -"\n" -"\n" -"4. Intellectual Property Rights\n" -"\n" -"All rights to the components of the Software Products belong to their respective authors and are \n" -"protected by intellectual property and copyright laws applicable to software programs.\n" -"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n" -"parts, by all means and for all purposes.\n" -"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A. \n" -"\n" -"\n" -"5. Governing Laws \n" -"\n" -"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n" -"portion is excluded from this contract. You remain bound by the other applicable sections of the \n" -"agreement.\n" -"The terms and conditions of this License are governed by the Laws of France.\n" -"All disputes on the terms of this license will preferably be settled out of court. As a last \n" -"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n" -"For any question on this document, please contact MandrakeSoft S.A. \n" -"" +#: ../../any.pm_.c:171 +msgid "restrict" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Default user" +#: ../../any.pm_.c:173 +msgid "Clean /tmp at each boot" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../any.pm_.c:174 #, c-format -msgid "" -"the progress bar x coordinate\n" -"of its upper left corner" +msgid "Precise RAM size if needed (found %d MB)" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Current interface configuration" +#: ../../any.pm_.c:176 +msgid "Enable multi profiles" msgstr "" -#: ../../printer/data.pm:1 -#, c-format -msgid "LPD - Line Printer Daemon" +#: ../../any.pm_.c:180 +msgid "Give the ram size in MB" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format +#: ../../any.pm_.c:182 msgid "" -"\n" -"If you have an ISA card, the values on the next screen should be right.\n" -"\n" -"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n" -"" +"Option ``Restrict command line options'' is of no use without a password" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not print any test page" +#: ../../any.pm_.c:183 ../../any.pm_.c:748 +#: ../../diskdrake/interactive.pm_.c:1204 +#: ../../install_steps_interactive.pm_.c:1072 +msgid "Please try again" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Gurmukhi" +#: ../../any.pm_.c:183 ../../any.pm_.c:748 +#: ../../install_steps_interactive.pm_.c:1072 +msgid "The passwords do not match" msgstr "" -#: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"%s already in use\n" -"" +#: ../../any.pm_.c:191 +msgid "Init Message" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Force No APIC" +#: ../../any.pm_.c:193 +msgid "Open Firmware Delay" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "This password is too short (it must be at least %d characters long)" +#: ../../any.pm_.c:194 +msgid "Kernel Boot Timeout" msgstr "" -#: ../../standalone.pm:1 -#, c-format -msgid "[keyboard]" +#: ../../any.pm_.c:195 +msgid "Enable CD Boot?" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "FTP proxy" +#: ../../any.pm_.c:196 +msgid "Enable OF Boot?" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install List" +#: ../../any.pm_.c:197 +msgid "Default OS?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../any.pm_.c:231 msgid "" -"Change\n" -"Restore Path" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Show only for the selected day" +"You decided to install the bootloader on a partition.\n" +"This implies you already have a bootloader on the hard drive you boot (eg: " +"System Commander).\n" +"\n" +"On which drive are you booting?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../any.pm_.c:247 msgid "" -"\tLimit disk usage to %s MB\n" -"" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "512 kB" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "(Note: Parallel ports cannot be auto-detected)" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>N" -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "What kind of card do you have?" +"Here are the entries on your boot menu so far.\n" +"You can add some more or change the existing ones." msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>O" +#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531 +#: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953 +#: ../../standalone/drakfont_.c:996 +msgid "Add" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Security" +#: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68 +#: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27 +#: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 +#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726 +msgid "Done" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n" -"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n" -"" +#: ../../any.pm_.c:257 +msgid "Modify" msgstr "" -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "<control>Q" +#: ../../any.pm_.c:265 +msgid "Which type of entry do you want to add?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Unable to find backups to restore...\n" -"" +#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674 +msgid "Linux" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Unknown" +#: ../../any.pm_.c:266 +msgid "Other OS (SunOS...)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"This server is already in the list, it cannot be added again.\n" -"" +#: ../../any.pm_.c:267 +msgid "Other OS (MacOS...)" msgstr "" -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Network Configuration" +#: ../../any.pm_.c:267 +msgid "Other OS (windows...)" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "<control>S" +#: ../../any.pm_.c:285 +msgid "Image" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "" -"Protocol for the rest of the world\n" -"No D-Channel (leased lines)" +#: ../../any.pm_.c:286 ../../any.pm_.c:297 +msgid "Root" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - /etc/xinetd.d/tftp:\n" -" \tdrakTermServ will configure this file to work in conjunction with the images created\n" -" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n" -" \teach diskless client.\n" -"\n" -" \tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \tservice tftp\n" -"\t\t\t{\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t}\n" -" \t\t\n" -" \tThe changes here from the default installation are changing the disable flag to\n" -" \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n" -" \tputs its images." +#: ../../any.pm_.c:287 ../../any.pm_.c:315 +msgid "Append" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s must be a number!" +#: ../../any.pm_.c:291 +msgid "Initrd" msgstr "" -#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 ../../standalone/draksplash:1 ../../standalone/draksplash:1 -#, c-format -msgid "Notice" +#: ../../any.pm_.c:292 +msgid "Read-write" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You have not configured X. Are you sure you really want this?" +#: ../../any.pm_.c:299 +msgid "Table" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "UPS devices" +#: ../../any.pm_.c:300 +msgid "Unsafe" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." +#: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314 +msgid "Label" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "If this is the case, you can make this be done automatically." +#: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215 +msgid "Default" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "What type of partitioning?" +#: ../../any.pm_.c:316 +msgid "Initrd-size" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"file list sent by FTP: %s\n" -" " +#: ../../any.pm_.c:318 +msgid "NoVideo" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Interface" +#: ../../any.pm_.c:326 +msgid "Remove entry" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Multisession CD" +#: ../../any.pm_.c:329 +msgid "Empty label not allowed" msgstr "" -#: ../../modules/parameters.pm:1 -#, c-format -msgid "comma separated strings" +#: ../../any.pm_.c:330 +msgid "You must specify a kernel image" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "These are the machines from which the scanners should be used:" +#: ../../any.pm_.c:330 +msgid "You must specify a root partition" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Messages" +#: ../../any.pm_.c:331 +msgid "This label is already used" msgstr "" -#: ../../harddrake/v4l.pm:1 +#: ../../any.pm_.c:640 #, c-format -msgid "Unknown|CPH06X (bt878) [many vendors]" +msgid "Found %s %s interfaces" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "POP and IMAP Server" +#: ../../any.pm_.c:641 +msgid "Do you have another one?" msgstr "" -#: ../../lang.pm:1 +#: ../../any.pm_.c:642 #, c-format -msgid "Mexico" +msgid "Do you have any %s interfaces?" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Model stepping" +#: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132 +#: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925 +msgid "No" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Rwanda" +#: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132 +#: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258 +#: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267 +#: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925 +msgid "Yes" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Switzerland" +#: ../../any.pm_.c:645 +msgid "See hardware info" msgstr "" -#: ../../lang.pm:1 +#. -PO: the first %s is the card type (scsi, network, sound,...) +#. -PO: the second is the vendor+model name +#: ../../any.pm_.c:662 #, c-format -msgid "Brunei Darussalam" +msgid "Installing driver for %s card %s" msgstr "" -#: ../../modules/interactive.pm:1 +#: ../../any.pm_.c:663 #, c-format -msgid "Do you have any %s interfaces?" +msgid "(module %s)" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../any.pm_.c:674 #, c-format msgid "" -"You must be root to read configuration file. \n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote lpd Printer Options" +"You may now provide its options to module %s.\n" +"Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" -#: ../../help.pm:1 +#: ../../any.pm_.c:680 #, c-format msgid "" -"GNU/Linux is a multi-user system, meaning each user may have their own\n" -"preferences, their own files and so on. You can read the ``Starter Guide''\n" -"to learn more about multi-user systems. But unlike \"root\", who is the\n" -"system administrator, the users you add at this point will not be\n" -"authorized to change anything except their own files and their own\n" -"configurations, protecting the system from unintentional or malicious\n" -"changes that impact on the system as a whole. You will have to create at\n" -"least one regular user for yourself -- this is the account which you should\n" -"use for routine, day-to-day use. Although it is very easy to log in as\n" -"\"root\" to do anything and everything, it may also be very dangerous! A\n" -"very simple mistake could mean that your system will not work any more. If\n" -"you make a serious mistake as a regular user, the worst that will happen is\n" -"that you will lose some information, but not affect the entire system.\n" -"\n" -"The first field asks you for a real name. Of course, this is not mandatory\n" -"-- you can actually enter whatever you like. DrakX will use the first word\n" -"you typed in this field and copy it to the \"%s\" field, which is the name\n" -"this user will enter to log onto the system. If you like, you may override\n" -"the default and change the username. The next step is to enter a password.\n" -"From a security point of view, a non-privileged (regular) user password is\n" -"not as crucial as the \"root\" password, but that is no reason to neglect\n" -"it by making it blank or too simple: after all, your files could be the\n" -"ones at risk.\n" -"\n" -"Once you click on \"%s\", you can add other users. Add a user for each one\n" -"of your friends: your father or your sister, for example. Click \"%s\" when\n" -"you have finished adding users.\n" -"\n" -"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" -"that user (bash by default).\n" -"\n" -"When you have finished adding users, you will be asked to choose a user\n" -"that can automatically log into the system when the computer boots up. If\n" -"you are interested in that feature (and do not care much about local\n" -"security), choose the desired user and window manager, then click \"%s\".\n" -"If you are not interested in this feature, uncheck the \"%s\" box." +"You may now provide options to module %s.\n" +"Options are in format ``name=value name2=value2 ...''.\n" +"For instance, ``io=0x300 irq=7''" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose the time interval between each backup" +#: ../../any.pm_.c:682 +msgid "Module options:" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 +#. -PO: the %s is the driver type (scsi, network, sound,...) +#: ../../any.pm_.c:694 #, c-format -msgid "Norway" +msgid "Which %s driver should I try?" msgstr "" -#: ../../keyboard.pm:1 +#: ../../any.pm_.c:703 #, c-format -msgid "Danish" +msgid "" +"In some cases, the %s driver needs to have extra information to work\n" +"properly, although it normally works fine without. Would you like to " +"specify\n" +"extra options for it or allow the driver to probe your machine for the\n" +"information it needs? Occasionally, probing will hang a computer, but it " +"should\n" +"not cause any damage." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"Automatically switch on numlock key locker under console\n" -"and XFree at boot." +#: ../../any.pm_.c:707 +msgid "Autoprobe" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Please enter the IP configuration for this machine.\n" -"Each item should be entered as an IP address in dotted-decimal\n" -"notation (for example, 1.2.3.4)." +#: ../../any.pm_.c:707 +msgid "Specify options" msgstr "" -#: ../../help.pm:1 +#: ../../any.pm_.c:719 #, c-format msgid "" -"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" -"knows if a selected package is located on another CD-ROM so it will eject\n" -"the current CD and ask you to insert the correct CD as required." +"Loading module %s failed.\n" +"Do you want to try again with other parameters?" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "When checked, owner and group won't be changed" +#: ../../any.pm_.c:734 +msgid "access to X programs" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bulgaria" +#: ../../any.pm_.c:735 +msgid "access to rpm tools" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Tuesday" +#: ../../any.pm_.c:736 +msgid "allow \"su\"" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Processors" +#: ../../any.pm_.c:737 +msgid "access to administrative files" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Svalbard and Jan Mayen Islands" +#: ../../any.pm_.c:738 +msgid "access to network tools" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No NIC selected!" +#: ../../any.pm_.c:739 +msgid "access to compilation tools" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../any.pm_.c:744 #, c-format -msgid "" -"Problems occured during configuration.\n" -"Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration." +msgid "(already added %s)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "partition %s is now known as %s" +#: ../../any.pm_.c:749 +msgid "This password is too simple" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Other files..." +#: ../../any.pm_.c:750 +msgid "Please give a user name" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Congo (Kinshasa)" +#: ../../any.pm_.c:751 +msgid "" +"The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server IP" +#: ../../any.pm_.c:752 +msgid "The user name is too long" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Partition table of drive %s is going to be written to disk!" +#: ../../any.pm_.c:753 +msgid "This user name is already added" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing HPOJ package..." +#: ../../any.pm_.c:757 +msgid "Add user" msgstr "" -#: ../../any.pm:1 +#: ../../any.pm_.c:758 #, c-format msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to install\n" -"LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used with\n" -"the Mandrake rescue image, making it much easier to recover from severe system\n" -"failures. Would you like to create a bootdisk for your system?\n" +"Enter a user\n" "%s" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -" DrakBackup Daemon Report\n" -"" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Latvian" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file." -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "monthly" -msgstr "" - -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Retry" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Module name" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Start at boot" -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Use Incremental Backups" -msgstr "" - -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "First sector of drive (MBR)" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "El Salvador" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Joystick" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "DVD" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "(detected on port %s)" -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Use Unicode by default" +#: ../../any.pm_.c:759 +msgid "Accept user" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the module of the GNU/Linux kernel that handles the device" +#: ../../any.pm_.c:770 +msgid "Real name" msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "Is your hardware clock set to GMT?" +#: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802 +#: ../../printer/printerdrake.pm_.c:915 +msgid "User name" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Trying to rescue partition table" +#: ../../any.pm_.c:774 +msgid "Shell" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s must be an integer number!" +#: ../../any.pm_.c:776 +msgid "Icon" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Use password to authenticate users" +#: ../../any.pm_.c:803 +msgid "Autologin" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format +#: ../../any.pm_.c:804 msgid "" -"Entries you'll have to fill:\n" -"%s" +"I can set up your computer to automatically log on one user.\n" +"Do you want to use this feature?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "For backups to other media, files are still created on the hard drive, then moved to the other media. Enabling this option will remove the hard drive tar files after the backup." +#: ../../any.pm_.c:808 +msgid "Choose the default user:" msgstr "" -#: ../../standalone/livedrake:1 -#, c-format -msgid "" -"Unable to start live upgrade !!!\n" -"" +#: ../../any.pm_.c:809 +msgid "Choose the window manager to run:" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Name: " +#: ../../any.pm_.c:824 +msgid "Please choose a language to use." msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 -#, c-format -msgid "up" +#: ../../any.pm_.c:826 +msgid "" +"Mandrake Linux can support multiple languages. Select\n" +"the languages you would like to install. They will be available\n" +"when your installation is complete and you restart your system." msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "16 million colors (24 bits)" +#: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697 +#: ../../standalone/drakxtv_.c:70 +msgid "All" msgstr "" -#: ../../any.pm:1 -#, c-format +#: ../../any.pm_.c:961 msgid "Allow all users" msgstr "" -#: ../advertising/08-store.pl:1 -#, c-format -msgid "The official MandrakeSoft Store" +#: ../../any.pm_.c:961 +msgid "No sharing" msgstr "" -#: ../../install_interactive.pm:1 ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185 #, c-format -msgid "Resizing" +msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../any.pm_.c:973 msgid "" -"Enter the maximum size\n" -" allowed for Drakbackup (MB)" +"You can export using NFS or Samba. Please select which you'd like to use." msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190 #, c-format -msgid "Cable connection" -msgstr "" - -#: ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/logdrake:1 -#, c-format -msgid "User" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do new backup before restore (only for incremental backups.)" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Secondary" -msgstr "" - -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed" -msgstr "" - -#: ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Name" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Button 3 Emulation" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check additions/removals of sgid files" +msgid "Mandatory package %s is missing" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Sending files..." +#: ../../any.pm_.c:987 +msgid "" +"Would you like to allow users to share some of their directories?\n" +"Allowing this will permit users to simply click on \"Share\" in konqueror " +"and nautilus.\n" +"\n" +"\"Custom\" permit a per-user granularity.\n" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Israeli (Phonetic)" +#: ../../any.pm_.c:1001 +msgid "Launch userdrake" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "access to rpm tools" +#: ../../any.pm_.c:1003 +msgid "" +"The per-user sharing uses the group \"fileshare\". \n" +"You can use userdrake to add a user in this group." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You must choose/enter a printer/device!" +#: ../../any.pm_.c:1053 ../../security/level.pm_.c:7 +msgid "Welcome To Crackers" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Permission problem accessing CD." +#: ../../any.pm_.c:1054 ../../security/level.pm_.c:8 +msgid "Poor" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Phone number" +#: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9 +msgid "Standard" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "Rules" +#: ../../any.pm_.c:1056 ../../security/level.pm_.c:10 +msgid "High" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Error: The \"%s\" driver for your sound card is unlisted" +#: ../../any.pm_.c:1057 ../../security/level.pm_.c:11 +msgid "Higher" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer name, description, location" +#: ../../any.pm_.c:1058 ../../security/level.pm_.c:12 +msgid "Paranoid" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (broadcast)" +#: ../../any.pm_.c:1061 +msgid "" +"This level is to be used with care. It makes your system more easy to use,\n" +"but very sensitive: it must not be used for a machine connected to others\n" +"or to the Internet. There is no password access." msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Use Xinerama extension" +#: ../../any.pm_.c:1064 +msgid "" +"Password are now enabled, but use as a networked computer is still not " +"recommended." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback" +#: ../../any.pm_.c:1065 +msgid "" +"This is the standard security recommended for a computer that will be used " +"to connect to the Internet as a client." msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "West Europe" +#: ../../any.pm_.c:1066 +msgid "" +"There are already some restrictions, and more automatic checks are run every " +"night." msgstr "" -#: ../../standalone.pm:1 -#, c-format +#: ../../any.pm_.c:1067 msgid "" -"[OPTIONS] [PROGRAM_NAME]\n" -"\n" -"OPTIONS:\n" -" --help - print this help message.\n" -" --report - program should be one of mandrake tools\n" -" --incident - program should be one of mandrake tools" +"With this security level, the use of this system as a server becomes " +"possible.\n" +"The security is now high enough to use the system as a server which can " +"accept\n" +"connections from many clients. Note: if your machine is only a client on the " +"Internet, you should choose a lower level." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On CD-R" +#: ../../any.pm_.c:1070 +msgid "" +"This is similar to the previous level, but the system is entirely closed and " +"security features are at their maximum." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Harddrake2 version %s" +#: ../../any.pm_.c:1076 +msgid "DrakSec Basic Options" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Preferences" +#: ../../any.pm_.c:1077 +msgid "Please choose the desired security level" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Swaziland" +#: ../../any.pm_.c:1080 +msgid "Security level" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Dominican Republic" +#: ../../any.pm_.c:1082 +msgid "Use libsafe for servers" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format +#: ../../any.pm_.c:1083 msgid "" -"An unexpected error has happened:\n" -"%s" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Copying %s" -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Choose color" +"A library which defends against buffer overflow and format string attacks." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Syriac" +#: ../../any.pm_.c:1084 +msgid "Security Administrator (login or email)" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Set-UID" +#: ../../any.pm_.c:1166 +msgid "" +"Here you can choose the key or key combination that will \n" +"allow switching between the different keyboard layouts\n" +"(eg: latin and non latin)" msgstr "" -#: ../../help.pm:1 +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#: ../../bootloader.pm_.c:436 #, c-format msgid "" -"Choose the hard drive you want to erase in order to install your new\n" -"Mandrake Linux partition. Be careful, all data present on this partition\n" -"will be lost and will not be recoverable!" +"Welcome to %s the operating system chooser!\n" +"\n" +"Choose an operating system in the list above or\n" +"wait %d seconds for default boot.\n" +"\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Use the %c and %c keys for selecting which entry is highlighted." -msgstr "" - -#: ../../scanner.pm:1 -#, c-format -msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" +#: ../../bootloader.pm_.c:983 +msgid "Welcome to GRUB the operating system chooser!" msgstr "" -#: ../../mouse.pm:1 ../../mouse.pm:1 +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm_.c:986 #, c-format -msgid "Generic 2 Button Mouse" +msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to execute the file" +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm_.c:989 +msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" -#: ../../lvm.pm:1 -#, c-format -msgid "" -"Remove the logical volumes first\n" -"" +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm_.c:992 +msgid "commands before booting, or 'c' for a command-line." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 +#: ../../bootloader.pm_.c:995 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Can't write /etc/sysconfig/bootsplash\n" -"File not found." -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet access" +#: ../../bootloader.pm_.c:999 +msgid "not enough room in /boot" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"y coordinate of text box\n" -"in number of characters" +#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows +#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language +#: ../../bootloader.pm_.c:1099 +msgid "Desktop" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "To get a list of the options available for the current printer click on the \"Print option list\" button." +#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows +#: ../../bootloader.pm_.c:1101 +msgid "Start Menu" msgstr "" -#: ../../standalone/service_harddrake:1 +#: ../../bootloader.pm_.c:1120 #, c-format -msgid "" -"Some devices were added: %s\n" -"" +msgid "You can't install the bootloader on a %s partition\n" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Enabling servers..." -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing test page(s)..." +#: ../../bootlook.pm_.c:53 +msgid "Boot Style Configuration" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"Transfer successful\n" -"You may want to verify you can login to the server with:\n" -"\n" -"ssh -i %s %s@%s\n" -"\n" -"without being prompted for a password." +#: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54 +#: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82 +#: ../../standalone/logdrake_.c:74 +msgid "/_File" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"There is already a partition with mount point %s\n" -"" +#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 +#: ../../standalone/logdrake_.c:80 +msgid "/File/_Quit" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable msec hourly security check." +#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 +#: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80 +msgid "<control>Q" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"At this point, you need to decide where you want to install the Mandrake\n" -"Linux operating system on your hard drive. If your hard drive is empty or\n" -"if an existing operating system is using all the available space you will\n" -"have to partition the drive. Basically, partitioning a hard drive consists\n" -"of logically dividing it to create the space needed to install your new\n" -"Mandrake Linux system.\n" -"\n" -"Because the process of partitioning a hard drive is usually irreversible\n" -"and can lead to lost data if there is an existing operating system already\n" -"installed on the drive, partitioning can be intimidating and stressful if\n" -"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" -"simplifies this process. Before continuing with this step, read through the\n" -"rest of this section and above all, take your time.\n" -"\n" -"Depending on your hard drive configuration, several options are available:\n" -"\n" -" * \"%s\": this option will perform an automatic partitioning of your blank\n" -"drive(s). If you use this option there will be no further prompts.\n" -"\n" -" * \"%s\": the wizard has detected one or more existing Linux partitions on\n" -"your hard drive. If you want to use them, choose this option. You will then\n" -"be asked to choose the mount points associated with each of the partitions.\n" -"The legacy mount points are selected by default, and for the most part it's\n" -"a good idea to keep them.\n" -"\n" -" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" -"all the space available on it, you will have to create free space for\n" -"Linux. To do so, you can delete your Microsoft Windows partition and data\n" -"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" -"partition. Resizing can be performed without the loss of any data, provided\n" -"you have previously defragmented the Windows partition and that it uses the\n" -"FAT format. Backing up your data is strongly recommended.. Using this\n" -"option is recommended if you want to use both Mandrake Linux and Microsoft\n" -"Windows on the same computer.\n" -"\n" -" Before choosing this option, please understand that after this\n" -"procedure, the size of your Microsoft Windows partition will be smaller\n" -"then when you started. You will have less free space under Microsoft\n" -"Windows to store your data or to install new software.\n" -"\n" -" * \"%s\": if you want to delete all data and all partitions present on\n" -"your hard drive and replace them with your new Mandrake Linux system,\n" -"choose this option. Be careful, because you will not be able to undo your\n" -"choice after you confirm.\n" -"\n" -" !! If you choose this option, all data on your disk will be deleted. !!\n" -"\n" -" * \"%s\": this will simply erase everything on the drive and begin fresh,\n" -"partitioning everything from scratch. All data on your disk will be lost.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"%s\": choose this option if you want to manually partition your hard\n" -"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" -"easily lose all your data. That's why this option is really only\n" -"recommended if you have done something like this before and have some\n" -"experience. For more instructions on how to use the DiskDrake utility,\n" -"refer to the ``Managing Your Partitions '' section in the ``Starter\n" -"Guide''." +#: ../../bootlook.pm_.c:82 +msgid "NewStyle Categorizing Monitor" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Ukraine" +#: ../../bootlook.pm_.c:83 +msgid "NewStyle Monitor" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Application:" +#: ../../bootlook.pm_.c:84 +msgid "Traditional Monitor" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "External ISDN modem" +#: ../../bootlook.pm_.c:85 +msgid "Traditional Gtk+ Monitor" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report check result by mail." +#: ../../bootlook.pm_.c:86 +msgid "Launch Aurora at boot time" msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "ADSL connection type :" +#: ../../bootlook.pm_.c:89 +msgid "Lilo/grub mode" msgstr "" -#: ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (default %s) " +#: ../../bootlook.pm_.c:89 +msgid "Yaboot mode" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Trouble shooting" +#: ../../bootlook.pm_.c:138 +msgid "Install themes" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../bootlook.pm_.c:139 msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -"Printing status:\n" -"%s\n" -"\n" -"" -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "daily" +"Display theme\n" +"under console" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "and one unknown printer" +#: ../../bootlook.pm_.c:140 +msgid "Create new theme" msgstr "" -#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#: ../../bootlook.pm_.c:184 #, c-format -msgid "Ireland" +msgid "Backup %s to %s.old" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../bootlook.pm_.c:187 #, c-format -msgid " Restore Configuration " +msgid "Copy %s to %s" msgstr "" -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Is this the correct setting?" +#: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224 +#: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250 +#: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119 +#: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352 +#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481 +#: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45 +#: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 +#: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 +#: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21 +msgid "Error" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"You will now set up your Internet/network connection. If you wish to\n" -"connect your computer to the Internet or to a local network, click \"%s\".\n" -"Mandrake Linux will attempt to autodetect network devices and modems. If\n" -"this detection fails, uncheck the \"%s\" box. You may also choose not to\n" -"configure the network, or to do it later, in which case clicking the \"%s\"\n" -"button will take you to the next step.\n" -"\n" -"When configuring your network, the available connections options are:\n" -"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" -"simple LAN connection (Ethernet).\n" -"\n" -"We will not detail each configuration option - just make sure that you have\n" -"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" -"from your Internet Service Provider or system administrator.\n" -"\n" -"You can consult the ``Starter Guide'' chapter about Internet connections\n" -"for details about the configuration, or simply wait until your system is\n" -"installed and use the program described there to configure your connection." +#: ../../bootlook.pm_.c:192 +msgid "Lilo message not found" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Wizard Configuration" +#: ../../bootlook.pm_.c:222 +msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" -#: ../../modules/interactive.pm:1 +#: ../../bootlook.pm_.c:222 #, c-format -msgid "Autoprobe" +msgid "Write %s" msgstr "" -#: ../../security/help.pm:1 -#, c-format +#: ../../bootlook.pm_.c:224 msgid "" -"if set to yes, check for :\n" -"\n" -"- empty passwords,\n" -"\n" -"- no password in /etc/shadow\n" -"\n" -"- for users with the 0 id other than root." -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Backup system files..." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Can't use broadcast with no NIS domain" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing printer \"%s\"..." +"Can't write /etc/sysconfig/bootsplash\n" +"File not found." msgstr "" -#: ../../security/l10n.pm:1 +#: ../../bootlook.pm_.c:235 #, c-format -msgid "Shell history size" +msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" -#: ../../standalone/drakfloppy:1 +#: ../../bootlook.pm_.c:238 #, c-format -msgid "drakfloppy" +msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format +#: ../../bootlook.pm_.c:244 msgid "" -"Please indicate where the auto_install.cfg file is located.\n" -"\n" -"Leave it blank if you do not want to set up automatic installation mode.\n" -"\n" -"" -msgstr "" - -#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Configured on other machines" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "information level that can be obtained through the cpuid instruction" +"Can't relaunch LiLo!\n" +"Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Peru" +#: ../../bootlook.pm_.c:248 +msgid "Relaunch 'lilo'" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid " on device: %s" +#: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156 +#: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449 +msgid "Notice" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Remove Windows(TM)" +#: ../../bootlook.pm_.c:251 +msgid "LiLo and Bootsplash themes installation successfull" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Starts the X Font Server (this is mandatory for XFree to run)." +#: ../../bootlook.pm_.c:251 +msgid "Theme installation failed!" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../bootlook.pm_.c:259 #, c-format msgid "" -"Most of these values were extracted\n" -"from your running system.\n" -"You can modify as needed." -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Select the font file or directory and click on 'Add'" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Madagascar" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Urpmi" +"You are currently using %s as your boot manager.\n" +"Click on Configure to launch the setup wizard." msgstr "" -#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "System" +#: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380 +#: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400 +#: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551 +msgid "Configure" msgstr "" -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Do you want to use this feature?" +#: ../../bootlook.pm_.c:268 +msgid "Splash selection" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Arabic" +#: ../../bootlook.pm_.c:271 +msgid "Themes" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../bootlook.pm_.c:273 msgid "" "\n" -"- Options:\n" -"" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Password required" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "%d minutes" -msgstr "" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Graphics card: %s" +"Select theme for\n" +"lilo and bootsplash,\n" +"you can choose\n" +"them separatly" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WebDAV transfer failed!" +#: ../../bootlook.pm_.c:276 +msgid "Lilo screen" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "XFree configuration" +#: ../../bootlook.pm_.c:281 +msgid "Bootsplash" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Choose action" +#: ../../bootlook.pm_.c:316 +msgid "System mode" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "French Polynesia" +#: ../../bootlook.pm_.c:318 +msgid "Launch the graphical environment when your system starts" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"Usually, DrakX has no problems detecting the number of buttons on your\n" -"mouse. If it does, it assumes you have a two-button mouse and will\n" -"configure it for third-button emulation. The third-button mouse button of a\n" -"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" -"right mouse buttons. DrakX will automatically know whether your mouse uses\n" -"a PS/2, serial or USB interface.\n" -"\n" -"If for some reason you wish to specify a different type of mouse, select it\n" -"from the list provided.\n" -"\n" -"If you choose a mouse other than the default, a test screen will be\n" -"displayed. Use the buttons and wheel to verify that the settings are\n" -"correct and that the mouse is working correctly. If the mouse is not\n" -"working well, press the space bar or [Return] key to cancel the test and to\n" -"go back to the list of choices.\n" -"\n" -"Wheel mice are occasionally not detected automatically, so you will need to\n" -"select your mouse from a list. Be sure to select the one corresponding to\n" -"the port that your mouse is attached to. After selecting a mouse and\n" -"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" -"the mouse wheel to ensure that it is activated correctly. Once you see the\n" -"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" -"buttons and check that the mouse pointer moves on-screen as you move your\n" -"mouse." +#: ../../bootlook.pm_.c:323 +msgid "No, I don't want autologin" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Support the OKI 4w and compatible winprinters." +#: ../../bootlook.pm_.c:325 +msgid "Yes, I want autologin with this (user, desktop)" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" +#: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96 +#: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355 +#: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797 +#: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137 +#: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432 +#: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561 +#: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604 +#: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911 +#: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288 +#: ../../ugtk2.pm_.c:355 +msgid "OK" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up." +#: ../../common.pm_.c:107 +msgid "GB" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Sending\n" -"speed:" +#: ../../common.pm_.c:107 +msgid "KB" msgstr "" -#. -PO: the first %s is the card type (scsi, network, sound,...) -#. -PO: the second is the vendor+model name -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Installing driver for %s card %s" +#: ../../common.pm_.c:107 +msgid "MB" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?" +#: ../../common.pm_.c:115 +msgid "TB" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../common.pm_.c:123 #, c-format -msgid "Enable Server" +msgid "%d minutes" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Ukrainian" +#: ../../common.pm_.c:125 +msgid "1 minute" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../common.pm_.c:127 #, c-format -msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again." +msgid "%d seconds" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to write the file" +#: ../../common.pm_.c:172 +msgid "Can't make screenshots before partitioning" msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../common.pm_.c:179 #, c-format -msgid "Please insert the Boot floppy used in drive %s" +msgid "Screenshots will be available after install in %s" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local network(s)" +#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118 +#: ../../network/tools.pm_.c:127 +msgid "France" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Remove Windows" +#: ../../crypto.pm_.c:15 +msgid "Costa Rica" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"Your %s has been configured.\n" -"You may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu." +#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118 +#: ../../network/tools.pm_.c:130 +msgid "Belgium" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Firewire controllers" +#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 +msgid "Czech Republic" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"After you have configured the general bootloader parameters, the list of\n" -"boot options that will be available at boot time will be displayed.\n" -"\n" -"If there are other operating systems installed on your machine they will\n" -"automatically be added to the boot menu. You can fine-tune the existing\n" -"options by clicking \"%s\" to create a new entry; selecting an entry and\n" -"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" -"changes.\n" -"\n" -"You may also not want to give access to these other operating systems to\n" -"anyone who goes to the console and reboots the machine. You can delete the\n" -"corresponding entries for the operating systems to remove them from the\n" -"bootloader menu, but you will need a boot disk in order to boot those other\n" -"operating systems!" +#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 +msgid "Germany" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "System mode" +#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 +msgid "Greece" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password." +#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 +msgid "Norway" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Netmask:" +#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 +msgid "Sweden" msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "Do it later" +#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118 +#: ../../network/tools.pm_.c:128 +msgid "Netherlands" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "Append" +#: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118 +#: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65 +msgid "Italy" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Refresh printer list (to display all available remote CUPS printers)" +#: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 +msgid "Austria" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"When this option is turned on, on every startup of CUPS it is automatically made sure that\n" -"\n" -"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" -"\n" -"- if /etc/cups/cupsd.conf is missing, it will be created\n" -"\n" -"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n" -"\n" -"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points." +#: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118 +#: ../../network/tools.pm_.c:131 +msgid "United States" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../diskdrake/dav.pm_.c:19 msgid "" -"The auto install can be fully automated if wanted,\n" -"in that case it will take over the hard drive!!\n" -"(this is meant for installing on another box).\n" -"\n" -"You may prefer to replay the installation.\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Network printer \"%s\", port %s" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Please choose what network adapter will be connected to your Local Area Network." +"WebDAV is a protocol that allows you to mount a web server's directory\n" +"locally, and treat it like a local filesystem (provided the web server is\n" +"configured as a WebDAV server). If you would like to add WebDAV mount\n" +"points, select \"New\"." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "OK to restore the other files." +#: ../../diskdrake/dav.pm_.c:27 +msgid "New" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please choose your keyboard layout." +#: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400 +#: ../../diskdrake/smbnfs_gtk.pm_.c:81 +msgid "Unmount" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer Device URI" +#: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397 +#: ../../diskdrake/smbnfs_gtk.pm_.c:82 +msgid "Mount" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not erasable media!" +#: ../../diskdrake/dav.pm_.c:65 +msgid "Server" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Terminal-based" +#: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391 +#: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607 +#: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85 +msgid "Mount point" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable IP spoofing protection." +#: ../../diskdrake/dav.pm_.c:85 +msgid "Please enter the WebDAV server URL" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing a printing system in the %s security level" +#: ../../diskdrake/dav.pm_.c:88 +msgid "The URL must begin with http:// or https://" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "The user name is too long" +#: ../../diskdrake/dav.pm_.c:109 +msgid "Server: " msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Other OS (windows...)" +#: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452 +#: ../../diskdrake/interactive.pm_.c:1102 +#: ../../diskdrake/interactive.pm_.c:1177 +msgid "Mount point: " msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183 #, c-format -msgid "WebDAV remote site already in sync!" +msgid "Options: %s" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Reading printer database..." +#: ../../diskdrake/hd_gtk.pm_.c:97 +msgid "Please make a backup of your data first" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Generate auto install floppy" +#: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946 +#: ../../diskdrake/interactive.pm_.c:956 +#: ../../diskdrake/interactive.pm_.c:1022 +msgid "Read carefully!" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../diskdrake/hd_gtk.pm_.c:100 msgid "" -"\t\t user name: %s\n" -"\t\t on path: %s \n" -"" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Somalia" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No open source driver" -msgstr "" - -#: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Def." +"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " +"enough)\n" +"at the beginning of the disk" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum." +#: ../../diskdrake/hd_gtk.pm_.c:154 +msgid "Wizard" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Network ID" +#: ../../diskdrake/hd_gtk.pm_.c:187 +msgid "Choose action" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Nicaragua" +#: ../../diskdrake/hd_gtk.pm_.c:191 +msgid "" +"You have one big FAT partition\n" +"(generally used by MicroSoft Dos/Windows).\n" +"I suggest you first resize that partition\n" +"(click on it, then click on \"Resize\")" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "New Caledonia" +#: ../../diskdrake/hd_gtk.pm_.c:194 +msgid "Please click on a partition" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "European protocol (EDSS1)" +#: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69 +#: ../../install_steps_gtk.pm_.c:464 +msgid "Details" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Delete" +#: ../../diskdrake/hd_gtk.pm_.c:254 +msgid "No hard drives found" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "Video mode" +#: ../../diskdrake/hd_gtk.pm_.c:325 +msgid "Ext2" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Oman" +#: ../../diskdrake/hd_gtk.pm_.c:325 +msgid "FAT" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Please enter your email address below " +#: ../../diskdrake/hd_gtk.pm_.c:325 +msgid "HFS" msgstr "" -#: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Network Monitoring" +#: ../../diskdrake/hd_gtk.pm_.c:325 +msgid "Journalised FS" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format +#: ../../diskdrake/hd_gtk.pm_.c:325 msgid "SunOS" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "New size in MB: " +#: ../../diskdrake/hd_gtk.pm_.c:325 +msgid "Swap" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Partition table type: %s\n" -"" +#: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118 +msgid "Empty" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Authentication Windows Domain" +#: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324 +#: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165 +#: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719 +msgid "Other" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "Manufacturer / Model:" +#: ../../diskdrake/hd_gtk.pm_.c:330 +msgid "Filesystem types:" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "US keyboard" +#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414 +msgid "Create" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Buttons emulation" +#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392 +#: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26 +#: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66 +msgid "Type" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349 #, c-format -msgid ", network printer \"%s\", port %s" +msgid "Use ``%s'' instead" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Drakbackup activities via tape:\n" -"\n" -"" +#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401 +msgid "Delete" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -" FTP connection problem: It was not possible to send your backup files by FTP.\n" -"" +#: ../../diskdrake/hd_gtk.pm_.c:353 +msgid "Use ``Unmount'' first" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530 #, c-format msgid "" -"The classic bug sound tester is to run the following commands:\n" -"\n" -"\n" -"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" -"by default\n" -"\n" -"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" -"currently uses\n" -"\n" -"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" -"loaded or not\n" -"\n" -"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" -"tell you if sound and alsa services're configured to be run on\n" -"initlevel 3\n" -"\n" -"- \"aumix -q\" will tell you if the sound volume is muted or not\n" -"\n" -"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" -"" +"After changing type of partition %s, all data on this partition will be lost" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Halt bug" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mail alert configuration" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Tokelau" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Matching" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Bosnian" -msgstr "" - -#: ../../standalone/drakbug:1 ../../standalone/drakbug:1 -#, c-format -msgid "Release: " +#: ../../diskdrake/interactive.pm_.c:177 +msgid "Choose a partition" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection speed" +#: ../../diskdrake/interactive.pm_.c:177 +msgid "Choose another partition" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Namibia" +#: ../../diskdrake/interactive.pm_.c:202 +msgid "Exit" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Database Server" +#: ../../diskdrake/interactive.pm_.c:228 +msgid "Toggle to expert mode" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "special capacities of the driver (burning ability and or DVD support)" +#: ../../diskdrake/interactive.pm_.c:228 +msgid "Toggle to normal mode" msgstr "" -#: ../../raid.pm:1 -#, c-format -msgid "Can't add a partition to _formatted_ RAID md%d" +#: ../../diskdrake/interactive.pm_.c:228 +msgid "Undo" msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "Network Time Protocol" +#: ../../diskdrake/interactive.pm_.c:247 +msgid "Continue anyway?" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" -"Your card is supported by XFree %s which may have a better support in 2D." +#: ../../diskdrake/interactive.pm_.c:252 +msgid "Quit without saving" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "Please wait, setting security options..." +#: ../../diskdrake/interactive.pm_.c:252 +msgid "Quit without writing the partition table?" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|CPH05X (bt878) [many vendors]" +#: ../../diskdrake/interactive.pm_.c:257 +msgid "Do you want to save /etc/fstab modifications" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Launch the graphical environment when your system starts" +#: ../../diskdrake/interactive.pm_.c:271 +msgid "Clear all" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "hourly" +#: ../../diskdrake/interactive.pm_.c:272 +msgid "Auto allocate" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Right Shift key" +#: ../../diskdrake/interactive.pm_.c:273 +#: ../../install_steps_interactive.pm_.c:220 +msgid "More" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid " Successfuly Restored on %s " +#: ../../diskdrake/interactive.pm_.c:278 +msgid "Hard drive information" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Making printer port available for CUPS..." +#: ../../diskdrake/interactive.pm_.c:310 +msgid "All primary partitions are used" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Antigua and Barbuda" +#: ../../diskdrake/interactive.pm_.c:311 +msgid "I can't add any more partition" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:312 msgid "" -"!!! Indicates the password in the system database is different than\n" -" the one in the Terminal Server database.\n" -"Delete/re-add the user to the Terminal Server to enable login." +"To have more partitions, please delete one to be able to create an extended " +"partition" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "Spanish" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Start" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Direct root login" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring applications..." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n" -"\n" -"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." +#: ../../diskdrake/interactive.pm_.c:322 +msgid "Save partition table" msgstr "" -#. -PO: here, "(detected)" string will be appended to eg "ADSL connection" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Normal modem connection" +#: ../../diskdrake/interactive.pm_.c:323 +msgid "Restore partition table" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "File Selection" +#: ../../diskdrake/interactive.pm_.c:324 +msgid "Rescue partition table" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 -#, c-format -msgid "CUPS" +#: ../../diskdrake/interactive.pm_.c:326 +msgid "Reload partition table" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Erase tape before backup" +#: ../../diskdrake/interactive.pm_.c:331 +msgid "Removable media automounting" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Run config tool" +#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360 +msgid "Select file" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Bootloader installation" +#: ../../diskdrake/interactive.pm_.c:347 +msgid "" +"The backup partition table has not the same size\n" +"Still continue?" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Root partition size in MB: " +#: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202 +#: ../../network/modem.pm_.c:95 +msgid "Warning" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "This is a mandatory package, it can't be unselected" +#: ../../diskdrake/interactive.pm_.c:362 +msgid "" +"Insert a floppy in drive\n" +"All data on this floppy will be lost" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses." +#: ../../diskdrake/interactive.pm_.c:373 +msgid "Trying to rescue partition table" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Etherboot ISO image is %s" +#: ../../diskdrake/interactive.pm_.c:379 +msgid "Detailed information" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saint Lucia" +#: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674 +msgid "Resize" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "November" +#: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727 +msgid "Move" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Disconnect..." +#: ../../diskdrake/interactive.pm_.c:396 +msgid "Format" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "IP mask" +#: ../../diskdrake/interactive.pm_.c:398 +msgid "Add to RAID" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Report" +#: ../../diskdrake/interactive.pm_.c:399 +msgid "Add to LVM" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Palau" +#: ../../diskdrake/interactive.pm_.c:402 +msgid "Remove from RAID" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "level" +#: ../../diskdrake/interactive.pm_.c:403 +msgid "Remove from LVM" msgstr "" -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "All incidents will be followed up by a single qualified MandrakeSoft technical expert." +#: ../../diskdrake/interactive.pm_.c:404 +msgid "Modify RAID" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Package Group Selection" +#: ../../diskdrake/interactive.pm_.c:405 +msgid "Use for loopback" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"Allow local hardware\n" -"configuration." +#: ../../diskdrake/interactive.pm_.c:445 +msgid "Create a new partition" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Via Network Protocol: %s" +#: ../../diskdrake/interactive.pm_.c:448 +msgid "Start sector: " msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "You can configure each parameter of the module here." +#: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827 +msgid "Size in MB: " msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Choose the resolution and the color depth" +#: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828 +msgid "Filesystem type: " msgstr "" -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Emulate third button?" +#: ../../diskdrake/interactive.pm_.c:456 +msgid "Preference: " msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:481 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Install updates" -msgstr "" - -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Mount" -msgstr "" - -#: ../../standalone/drakautoinst:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Creating auto install floppy" +#: ../../diskdrake/interactive.pm_.c:511 +msgid "Remove the loopback file?" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "text box height" +#: ../../diskdrake/interactive.pm_.c:541 +msgid "Change partition type" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "State" +#: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48 +msgid "Which filesystem do you want?" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Be sure a media is present for the device %s" +#: ../../diskdrake/interactive.pm_.c:548 +msgid "Switching from ext2 to ext3" msgstr "" -#: ../../any.pm:1 +#: ../../diskdrake/interactive.pm_.c:578 #, c-format -msgid "Enable multiple profiles" +msgid "Where do you want to mount loopback file %s?" msgstr "" -#: ../../fs.pm:1 +#: ../../diskdrake/interactive.pm_.c:579 #, c-format -msgid "Do not interpret character or block special devices on the file system." +msgid "Where do you want to mount device %s?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:585 msgid "" -"These options can backup and restore all files in your /etc directory.\n" -"" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Local printer" +"Can't unset mount point as this partition is used for loop back.\n" +"Remove the loopback first" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm_.c:606 #, c-format -msgid "Files Restored..." +msgid "Where do you want to mount %s?" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Package selection" +#: ../../diskdrake/interactive.pm_.c:630 +msgid "Computing FAT filesystem bounds" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Mauritania" +#: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689 +#: ../../install_interactive.pm_.c:131 +msgid "Resizing" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.\n" -"\n" -"The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.\n" -"\t\t \n" -"Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.\n" -"\n" -"" +#: ../../diskdrake/interactive.pm_.c:662 +msgid "This partition is not resizeable" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." +#: ../../diskdrake/interactive.pm_.c:667 +msgid "All data on this partition should be backed-up" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/interactive.pm_.c:669 #, c-format -msgid "All primary partitions are used" +msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "LPD server \"%s\", printer \"%s\"" +#: ../../diskdrake/interactive.pm_.c:674 +msgid "Choose the new size" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems." +#: ../../diskdrake/interactive.pm_.c:675 +msgid "New size in MB: " msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Automatic detection and configuration of hardware at boot." +#: ../../diskdrake/interactive.pm_.c:728 +msgid "Which disk do you want to move it to?" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Installation Server Configuration" +#: ../../diskdrake/interactive.pm_.c:729 +msgid "Sector" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Configuring IDE" +#: ../../diskdrake/interactive.pm_.c:730 +msgid "Which sector do you want to move it to?" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Network functionality not configured" +#: ../../diskdrake/interactive.pm_.c:733 +msgid "Moving" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Configure module" +#: ../../diskdrake/interactive.pm_.c:733 +msgid "Moving partition..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cocos (Keeling) Islands" +#: ../../diskdrake/interactive.pm_.c:750 +msgid "Choose an existing RAID to add to" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "You'll need to reboot before the modification can take place" +#: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768 +msgid "new" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider phone number" +#: ../../diskdrake/interactive.pm_.c:766 +msgid "Choose an existing LVM to add to" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Host %s" +#: ../../diskdrake/interactive.pm_.c:771 +msgid "LVM name?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Fiji" +#: ../../diskdrake/interactive.pm_.c:812 +msgid "This partition can't be used for loopback" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Armenia" +#: ../../diskdrake/interactive.pm_.c:825 +msgid "Loopback" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Second floppy drive" +#: ../../diskdrake/interactive.pm_.c:826 +msgid "Loopback file name: " msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "About Harddrake" +#: ../../diskdrake/interactive.pm_.c:831 +msgid "Give a file name" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Authorize TCP connections to X Window" +#: ../../diskdrake/interactive.pm_.c:834 +msgid "File already used by another loopback, choose another one" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Drive capacity" +#: ../../diskdrake/interactive.pm_.c:835 +msgid "File already exists. Use it?" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Insert a floppy in drive\n" -"All data on this floppy will be lost" +#: ../../diskdrake/interactive.pm_.c:858 +msgid "Mount options" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size: %s" +#: ../../diskdrake/interactive.pm_.c:865 +msgid "Various" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Control and Shift keys simultaneously" +#: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76 +msgid "device" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "secondary" +#: ../../diskdrake/interactive.pm_.c:930 +msgid "level" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Backup Configuration." +#: ../../diskdrake/interactive.pm_.c:931 +msgid "chunk size" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report check result to syslog." +#: ../../diskdrake/interactive.pm_.c:947 +msgid "Be careful: this operation is dangerous." msgstr "" -#. -PO: keep this short or else the buttons will not fit in the window -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "No password" +#: ../../diskdrake/interactive.pm_.c:962 +msgid "What type of partitioning?" msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm_.c:978 #, c-format -msgid "Nigeria" +msgid "The package %s is needed. Install it?" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:992 msgid "" -"%s: %s requires hostname...\n" -"" +"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " +"1024).\n" +"Either you use LILO and it won't work, or you don't use LILO and you don't " +"need /boot" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no existing partition to use" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:996 msgid "" -"The following scanners\n" -"\n" -"%s\n" -"are available on your system.\n" -"" +"The partition you've selected to add as root (/) is physically located " +"beyond\n" +"the 1024th cylinder of the hard drive, and you have no /boot partition.\n" +"If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device on parallel port #%s" +#: ../../diskdrake/interactive.pm_.c:1002 +msgid "" +"You've selected a software RAID partition as root (/).\n" +"No bootloader is able to handle this without a /boot partition.\n" +"So be careful to add a /boot partition" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1022 #, c-format -msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware." +msgid "Partition table of drive %s is going to be written to disk!" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Hard drive information" +#: ../../diskdrake/interactive.pm_.c:1026 +msgid "You'll need to reboot before the modification can take place" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm_.c:1037 #, c-format -msgid "Russian" +msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Jordan" +#: ../../diskdrake/interactive.pm_.c:1039 +msgid "Formatting" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/interactive.pm_.c:1040 #, c-format -msgid "Hide files" +msgid "Formatting loopback file %s" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1041 +#: ../../install_steps_interactive.pm_.c:466 #, c-format -msgid "Auto-detect printers connected to this machine" +msgid "Formatting partition %s" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Sorry, no floppy drive available" +#: ../../diskdrake/interactive.pm_.c:1052 +msgid "Hide files" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bolivia" +#: ../../diskdrake/interactive.pm_.c:1052 +msgid "Move files to the new partition" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "" -"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" -"\n" -"" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Bad package" +"Directory %s already contains data\n" +"(%s)" msgstr "" -#: ../advertising/07-server.pl:1 -#, c-format -msgid "Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!" +#: ../../diskdrake/interactive.pm_.c:1064 +msgid "Moving files to the new partition" msgstr "" -#: ../../security/level.pm:1 +#: ../../diskdrake/interactive.pm_.c:1068 #, c-format -msgid "DrakSec Basic Options" +msgid "Copying %s" msgstr "" -#: ../../standalone/draksound:1 +#: ../../diskdrake/interactive.pm_.c:1072 #, c-format -msgid "" -"\n" -"\n" -"\n" -"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program. Just type \"sndconfig\" in a console." +msgid "Removing %s" msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm_.c:1082 #, c-format -msgid "Romania" +msgid "partition %s is now known as %s" msgstr "" -#: ../../standalone/drakperm:1 ../../standalone/drakperm:1 -#, c-format -msgid "Group" +#: ../../diskdrake/interactive.pm_.c:1103 +#: ../../diskdrake/interactive.pm_.c:1162 +msgid "Device: " msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm_.c:1104 #, c-format -msgid "Canada" +msgid "DOS drive letter: %s (just a guess)\n" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "choose device" +#: ../../diskdrake/interactive.pm_.c:1108 +#: ../../diskdrake/interactive.pm_.c:1116 +#: ../../diskdrake/interactive.pm_.c:1181 +msgid "Type: " msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove from LVM" +#: ../../diskdrake/interactive.pm_.c:1112 +msgid "Name: " msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm_.c:1120 #, c-format -msgid "Timezone" +msgid "Start: sector %s\n" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm_.c:1121 #, c-format -msgid "German" +msgid "Size: %s" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm_.c:1123 #, c-format -msgid "Next ->" +msgid ", %s sectors" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1125 #, c-format -msgid "Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine." +msgid "Cylinder %d to %d\n" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"\n" -"Chances are, this partition is\n" -"a Driver partition. You should\n" -"probably leave it alone.\n" -"" +#: ../../diskdrake/interactive.pm_.c:1126 +msgid "Formatted\n" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Guinea-Bissau" +#: ../../diskdrake/interactive.pm_.c:1127 +msgid "Not formatted\n" msgstr "" -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Horizontal refresh rate" +#: ../../diskdrake/interactive.pm_.c:1128 +msgid "Mounted\n" msgstr "" -#: ../../standalone/drakperm:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/printerdrake:1 +#: ../../diskdrake/interactive.pm_.c:1129 #, c-format -msgid "Edit" +msgid "RAID md%s\n" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "" -"Can't unset mount point as this partition is used for loop back.\n" -"Remove the loopback first" +"Loopback file(s):\n" +" %s\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"" +#: ../../diskdrake/interactive.pm_.c:1132 +msgid "" +"Partition booted by default\n" +" (for MS-DOS boot, not for lilo)\n" msgstr "" -#: ../../harddrake/data.pm:1 +#: ../../diskdrake/interactive.pm_.c:1134 #, c-format -msgid "USB controllers" +msgid "Level %s\n" msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../diskdrake/interactive.pm_.c:1135 #, c-format -msgid "What norm is your TV using?" +msgid "Chunk size %s\n" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1136 #, c-format -msgid "Share name" +msgid "RAID-disks %s\n" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../diskdrake/interactive.pm_.c:1138 #, c-format -msgid "enable" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Contacting Mandrake Linux web site to get the list of available mirrors..." +msgid "Loopback file name: %s" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:1141 msgid "" -"A problem occured while restarting the network: \n" "\n" -"%s" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove the loopback file?" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Selected size is larger than available space" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NCP server name missing!" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Please choose your country." -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Hard Disk Backup files..." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Laotian" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Samoa" +"Chances are, this partition is\n" +"a Driver partition, you should\n" +"probably leave it alone.\n" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../diskdrake/interactive.pm_.c:1144 msgid "" -"The rstat protocol allows users on a network to retrieve\n" -"performance metrics for any machine on that network." -msgstr "" - -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Re-generating list of configured scanners ..." -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Module configuration" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Scanner" +"\n" +"This special Bootstrap\n" +"partition is for\n" +"dual-booting your system.\n" msgstr "" -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Warning: testing this graphic card may freeze your computer" +#: ../../diskdrake/interactive.pm_.c:1163 +msgid "Read-only" msgstr "" -#: ../../any.pm:1 +#: ../../diskdrake/interactive.pm_.c:1164 #, c-format -msgid "The user name must contain only lower cased letters, numbers, `-' and `_'" +msgid "Size: %s\n" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../diskdrake/interactive.pm_.c:1165 #, c-format -msgid "Menudrake" +msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "Welcome To Crackers" +#: ../../diskdrake/interactive.pm_.c:1166 +msgid "Info: " msgstr "" -#: ../../modules/interactive.pm:1 +#: ../../diskdrake/interactive.pm_.c:1167 #, c-format -msgid "Module options:" +msgid "LVM-disks %s\n" msgstr "" -#: ../advertising/11-mnf.pl:1 +#: ../../diskdrake/interactive.pm_.c:1168 #, c-format -msgid "Secure your networks with the Multi Network Firewall" +msgid "Partition table type: %s\n" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm_.c:1169 #, c-format -msgid "Go on without configuring the network" +msgid "on channel %d id %d\n" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "Abort" +#: ../../diskdrake/interactive.pm_.c:1199 +msgid "Filesystem encryption key" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No password prompt on %s at port %s" +#: ../../diskdrake/interactive.pm_.c:1200 +msgid "Choose your filesystem encryption key" msgstr "" -#: ../../mouse.pm:1 +#: ../../diskdrake/interactive.pm_.c:1203 #, c-format -msgid "Kensington Thinking Mouse with Wheel emulation" +msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Usage of remote scanners" +#: ../../diskdrake/interactive.pm_.c:1204 +msgid "The encryption keys do not match" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation." +#: ../../diskdrake/interactive.pm_.c:1207 +msgid "Encryption key" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (Norwegian)" +#: ../../diskdrake/interactive.pm_.c:1208 +msgid "Encryption key (again)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hard Disk Backup Progress..." +#: ../../diskdrake/removable.pm_.c:47 +msgid "Change type" msgstr "" -#: ../../standalone/drakfloppy:1 +#: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format -msgid "Unable to fork: %s" +msgid "Can't login using username %s (bad password?)" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Type: " +#: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 +msgid "Domain Authentication Required" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Edit Client" +#: ../../diskdrake/smbnfs_gtk.pm_.c:167 +msgid "Another one" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "no fonts found" +#: ../../diskdrake/smbnfs_gtk.pm_.c:167 +msgid "Which username" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 -#, c-format -msgid "Mouse" +#: ../../diskdrake/smbnfs_gtk.pm_.c:176 +msgid "" +"Please enter your username, password and domain name to access this host." msgstr "" -#: ../../bootloader.pm:1 -#, c-format -msgid "not enough room in /boot" +#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477 +msgid "Username" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "trying to promote %s" +#: ../../diskdrake/smbnfs_gtk.pm_.c:180 +msgid "Domain" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Liechtenstein" +#: ../../diskdrake/smbnfs_gtk.pm_.c:200 +msgid "Search servers" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565 +#: ../../fs.pm_.c:569 ../../fs.pm_.c:573 #, c-format -msgid "Host name" +msgid "%s formatting of %s failed" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../fs.pm_.c:610 #, c-format -msgid "the color of the progress bar" +msgid "I don't know how to format %s in type %s" msgstr "" -#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 +#: ../../fs.pm_.c:684 ../../fs.pm_.c:727 #, c-format -msgid "Suppress Fonts Files" +msgid "mounting partition %s in directory %s failed" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599 #, c-format -msgid "Add to RAID" +msgid "error unmounting %s: %s" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"You can add additional entries in yaboot for other operating systems,\n" -"alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OSs, the entry consists only of a label and the \"root\"\n" -"partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is the name you will have to type at the yaboot prompt to\n" -"select this boot option.\n" -"\n" -" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" -"variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or ``/'' for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is often used to\n" -"assist in initializing video hardware, or to enable keyboard mouse button\n" -"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" -"The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" -"need to allocate a large ramdisk, this option can be used to specify a\n" -"ramdisk larger than the default.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially mounted as\n" -"read-only, to allow a file system check before the system becomes ``live''.\n" -"You can override the default with this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in ``novideo'' mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" -"highlighted with a ``*'' if you press [Tab] to see the boot selections." +#: ../../fsedit.pm_.c:21 +msgid "simple" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." +#: ../../fsedit.pm_.c:25 +msgid "with /usr" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No floppy drive available!" +#: ../../fsedit.pm_.c:30 +msgid "server" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../fsedit.pm_.c:240 #, c-format msgid "" -"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n" +"I can't read the partition table of device %s, it's too corrupted for me :(\n" +"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" +"The other solution is to not allow DrakX to modify the partition table.\n" +"(the error is %s)\n" "\n" -"" +"Do you agree to loose all the partitions?\n" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saudi Arabia" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "Internet" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Continue anyway?" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one." -msgstr "" - -#: ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer" +#: ../../fsedit.pm_.c:501 +msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Geometry: %s cylinders, %s heads, %s sectors\n" -"" +#: ../../fsedit.pm_.c:502 +msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition." +#: ../../fsedit.pm_.c:521 +msgid "Mount points must begin with a leading /" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../fsedit.pm_.c:522 #, c-format -msgid "Printing on the printer \"%s\"" +msgid "There is already a partition with mount point %s\n" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../fsedit.pm_.c:526 #, c-format -msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" +msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Tape" +#: ../../fsedit.pm_.c:528 +msgid "This directory should remain within the root filesystem" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format +#: ../../fsedit.pm_.c:530 msgid "" -"To submit a bug report, click the report button, which will open your default browser\n" -"to Anthill where you will be able to upload the above information as a bug report." +"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " +"point\n" msgstr "" -#: ../../security/l10n.pm:1 +#: ../../fsedit.pm_.c:532 #, c-format -msgid "Password minimum length and number of digits and upcase letters" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now from configuration file" -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points should contain only alphanumerical characters" +msgid "You can't use an encrypted file system for mount point %s" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Restarting printing system..." +#: ../../fsedit.pm_.c:599 +msgid "Not enough free space for auto-allocating" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 -#, c-format -msgid "You can only run with no CDROM support" +#: ../../fsedit.pm_.c:601 +msgid "Nothing to do" msgstr "" -#: ../../modules/interactive.pm:1 +#: ../../fsedit.pm_.c:694 #, c-format -msgid "See hardware info" +msgid "Error opening %s for writing: %s" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Day" +#: ../../harddrake/data.pm_.c:71 +msgid "cpu /* " msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "First sector of boot partition" +#: ../../harddrake/sound.pm_.c:170 +msgid "No alternative driver" msgstr "" -#: ../../standalone.pm:1 +#: ../../harddrake/sound.pm_.c:171 #, c-format msgid "" -"[OPTIONS]...\n" -"Mandrake Terminal Server Configurator\n" -"--enable : enable MTS\n" -"--disable : disable MTS\n" -"--start : start MTS\n" -"--stop : stop MTS\n" -"--adduser : add an existing system user to MTS (requires username)\n" -"--deluser : delete an existing system user from MTS (requires username)\n" -"--addclient : add a client machine to MTS (requires MAC address, IP, nbi image name)\n" -"--delclient : delete a client machine from MTS (requires MAC address, IP, nbi image name)" +"There's no known OSS/ALSA alternative driver for your sound card (%s) which " +"currently uses \"%s\"" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model" -msgstr "" - -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ - Print, Don't Queue" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet Mask:" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Set password expiration and account inactivation delays" +#: ../../harddrake/sound.pm_.c:173 +msgid "Sound configuration" msgstr "" -#: ../../standalone/logdrake:1 +#: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" -"_: load here is a noun, the load of the system\n" -"Load" +"Here you can select an alternative driver (either OSS or ALSA) for your " +"sound card (%s)." msgstr "" -#: ../../Xconfig/monitor.pm:1 +#: ../../harddrake/sound.pm_.c:176 #, c-format msgid "" -"The two critical parameters are the vertical refresh rate, which is the rate\n" -"at which the whole screen is refreshed, and most importantly the horizontal\n" -"sync rate, which is the rate at which scanlines are displayed.\n" "\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n" -"that is beyond the capabilities of your monitor: you may damage your monitor.\n" -" If in doubt, choose a conservative setting." -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"This interface has not been configured yet.\n" -"Run the \"Add an interface\" assistant from the Mandrake Control Center" -msgstr "" - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, c-format -msgid "Modify" +"\n" +"Your card currently use the %s\"%s\" driver (default driver for your card is " +"\"%s\")" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n" -"" +#: ../../harddrake/sound.pm_.c:178 +msgid "Driver:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Need hostname, username and password!" +#: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303 +#: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911 +#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964 +#: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030 +#: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078 +#: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134 +#: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690 +msgid "Help" msgstr "" -#: ../../network/tools.pm:1 -#, c-format -msgid "Insert floppy" +#: ../../harddrake/sound.pm_.c:185 +msgid "Switching between ALSA and OSS help" msgstr "" -#: ../../diskdrake/dav.pm:1 -#, c-format +#: ../../harddrake/sound.pm_.c:186 msgid "" -"WebDAV is a protocol that allows you to mount a web server's directory\n" -"locally, and treat it like a local filesystem (provided the web server is\n" -"configured as a WebDAV server). If you would like to add WebDAV mount\n" -"points, select \"New\"." +"OSS (Open Sound System) was the first sound API. It's an OS independant " +"sound API (it's available on most unices systems) but it's a very basic and " +"limited API.\n" +"What's more, OSS drivers all reinvent the wheel.\n" +"\n" +"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " +"which\n" +"supports quite a large range of ISA, USB and PCI cards.\n" +"\n" +"It also provides a much higher API than OSS.\n" +"\n" +"To use alsa, one can either use:\n" +"- the old compatibility OSS api\n" +"- the new ALSA api that provides many enhanced features but requires using " +"the ALSA library.\n" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../harddrake/sound.pm_.c:202 #, c-format -msgid "HardDrake" +msgid "" +"The old \"%s\" driver is blacklisted.\n" +"\n" +"It has been reported to oopses the kernel on unloading.\n" +"\n" +"The new \"%s\" driver'll only be used on next bootstrap." msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "new" +#: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298 +msgid "Please Wait... Applying the configuration" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable syslog reports to console 12" +#: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382 +#: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113 +#: ../../standalone/service_harddrake_.c:64 +msgid "Please wait" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Would you like to try again?" +#: ../../harddrake/sound.pm_.c:210 +msgid "No known driver" msgstr "" -#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 +#: ../../harddrake/sound.pm_.c:211 #, c-format -msgid "Wizard" +msgid "There's no known driver for your sound card (%s)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Edit selected server" +#: ../../harddrake/sound.pm_.c:214 +msgid "Unkown driver" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../harddrake/sound.pm_.c:215 #, c-format -msgid "Please choose where you want to backup" +msgid "" +"The \"%s\" driver for your sound card is unlisted\n" +"\n" +"Please send the output of the \"lspcidrake -v\" command to\n" +"<install at mandrakesoft dot com>\n" +"with subject: unlisted sound driver \"%s\"" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "You need to reboot for the partition table modifications to take place" +#: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 +msgid "Auto-detect" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include the browser cache" +#: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198 +msgid "Unknown|Generic" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)" +#: ../../harddrake/v4l.pm_.c:97 +msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Please, choose your keyboard layout." +#: ../../harddrake/v4l.pm_.c:98 +msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" -#: ../../mouse.pm:1 ../../security/level.pm:1 -#, c-format -msgid "Standard" +#: ../../harddrake/v4l.pm_.c:224 +msgid "" +"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" +"detect the rights parameters.\n" +"If your card is misdetected, you can force the right tuner and card types " +"here. Just select your tv card parameters if needed" msgstr "" -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose your mouse type." +#: ../../harddrake/v4l.pm_.c:227 +msgid "Card model:" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Connect..." +#: ../../harddrake/v4l.pm_.c:228 +msgid "Tuner type:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to configure printer \"%s\"!" +#: ../../harddrake/v4l.pm_.c:229 +msgid "Number of capture buffers:" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "not configured" +#: ../../harddrake/v4l.pm_.c:229 +msgid "number of capture buffers for mmap'ed capture" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "ISA / PCMCIA" +#: ../../harddrake/v4l.pm_.c:231 +msgid "PLL setting:" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "About" +#: ../../harddrake/v4l.pm_.c:232 +msgid "Radio support:" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "GlidePoint" +#: ../../harddrake/v4l.pm_.c:232 +msgid "enable radio support" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Proxies configuration" +#: ../../help.pm_.c:13 +msgid "" +"GNU/Linux is a multiuser system, and this means that each user can have his\n" +"own preferences, his own files and so on. You can read the ``User Guide''\n" +"to learn more this concept. But unlike \"root\", which is the\n" +"administrator, the users you add here will not be entitled to change\n" +"anything except their own files and their own configurations. You will have\n" +"to create at least one regular user for yourself. That account is where you\n" +"should log in for routine use. Although it is very practical to log in as\n" +"\"root\" everyday, it may also be very dangerous! The slightest mistake\n" +"could mean that your system would not work any more. If you make a serious\n" +"mistake as a regular user, you may only lose some information, but not the\n" +"entire system.\n" +"\n" +"First, you have to enter your real name. This is not mandatory, of course\n" +"-- as you can actually enter whatever you want. DrakX will then take the\n" +"first word you have entered in the box and will bring it over to the \"User\n" +"name\". This is the name this particular user will use to log onto the\n" +"system. You can change it. You then have to enter a password here. A\n" +"non-privileged (regular) user's password is not as crucial as the \"root\"\n" +"one from a security point of view, but that is no reason to neglect it:\n" +"after all, your files are at risk.\n" +"\n" +"If you click on \"Accept user\", you can then add as many as you want. Add\n" +"a user for each one of the people meant to use that computer. When you are\n" +"finish adding all the users you want, select \"Done\".\n" +"\n" +"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" +"for that user (bash by default).\n" +"\n" +"When you are finished adding all users, you will be proposed to choose a\n" +"user which can automatically log into the system when the computer boots\n" +"up. If you are interested in that feature (and do not care much about local\n" +"security), choose the desired user and window manager, then click \"Yes\".\n" +"If you are not interested in this feature, click \"No\"." +msgstr "" + +#: ../../help.pm_.c:48 +msgid "" +"Listed above are the existing Linux partitions detected on your hard drive.\n" +"You can keep the choices made by the wizard, they are good for most common\n" +"installations. If you make any changes, you must at least define a root\n" +"partition (\"/\"). Do not choose too small a partition or you will not be\n" +"able to install enough software. If you want to store your data on a\n" +"separate partition, you will also need to create a \"/home\" partition\n" +"(only possible if you have more than one Linux partition available).\n" +"\n" +"Each partition is listed as follows: \"Name\", \"Capacity\".\n" +"\n" +"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../help.pm_.c:79 msgid "" -"Start: sector %s\n" -"" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "No Mask" +"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" +"knows if a selected package is located on another CD-ROM and will eject the\n" +"current CD and ask you to insert a different one as required." msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface already configured" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Couldn't access the floppy!" -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format +#: ../../help.pm_.c:84 msgid "" -"Warning: Free Software may not necessarily be patent free, and some Free\n" -"Software included may be covered by patents in your country. For example, the\n" -"MP3 decoders included may require a licence for further usage (see\n" -"http://www.mp3licensing.com for more details). If you are unsure if a patent\n" -"may be applicable to you, check your local laws." -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Mail Server" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please click on a partition" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device on HP JetDirect" -msgstr "" - -#: ../../any.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Linux" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Have a nice day!" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/fd0" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Upgrade %s" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Connection" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels in progress ..." +"It is now time to specify which programs you wish to install on your\n" +"system. There are thousands of packages available for Mandrake Linux, and\n" +"you are not supposed to know them all by heart.\n" +"\n" +"If you are performing a standard installation from a CD-ROM, you will first\n" +"be asked to specify the CDs you currently have (in Expert mode only). Check\n" +"the CD labels and highlight the boxes corresponding to the CDs you have\n" +"available for installation. Click \"OK\" when you are ready to continue.\n" +"\n" +"Packages are sorted in groups corresponding to a particular use of your\n" +"machine. The groups themselves are sorted into four sections:\n" +"\n" +" * \"Workstation\": if you plan to use your machine as a workstation,\n" +"select one or more of the corresponding groups;\n" +"\n" +" * \"Development\": if your machine is to be used for programming, choose\n" +"the desired group(s);\n" +"\n" +" * \"Server\": if your machine is intended to be a server, you will be able\n" +"to select which of the most common services you wish to install on your\n" +"machine;\n" +"\n" +" * \"Graphical Environment\": finally, this is where you will choose your\n" +"preferred graphical environment. At least one must be selected if you want\n" +"to have a graphical workstation!\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group. If you unselect all groups when performing a regular\n" +"installation (by opposition to an upgrade), a dialog will pop up proposing\n" +"different options for a minimal installation:\n" +"\n" +" * \"With X\": install the fewest packages possible to have a working\n" +"graphical desktop;\n" +"\n" +" * \"With basic documentation\": installs the base system plus basic\n" +"utilities and their documentation. This installation is suitable for\n" +"setting up a server;\n" +"\n" +" * \"Truly minimal install\": will install the strict minimum necessary to\n" +"get a working Linux system, in command line only. This installation is\n" +"about 65Mb large.\n" +"\n" +"You can check the \"Individual package selection\" box, which is useful if\n" +"you are familiar with the packages being offered or if you want to have\n" +"total control over what will be installed.\n" +"\n" +"If you started the installation in \"Upgrade\" mode, you can unselect all\n" +"groups to avoid installing any new package. This is useful to repair or\n" +"update an existing system." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../help.pm_.c:135 msgid "" -"Error during sending file via FTP.\n" -" Please correct your FTP configuration." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "IP Range Start:" +"Finally, depending on whether or not you chose to be able to select\n" +"individual packages, you will be presented a tree containing all packages\n" +"classified by groups and subgroups. While browsing the tree, you can select\n" +"entire groups, subgroups, or individual packages.\n" +"\n" +"Whenever you select a package on the tree, a description appears on the\n" +"right. When your selection is finished, click the \"Install\" button which\n" +"will then launch the installation process. Depending on the speed of your\n" +"hardware and the number of packages that need to be installed, it may take\n" +"a while to complete the process. An installation time estimate is displayed\n" +"on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" +"of coffee.\n" +"\n" +"!! If a server package has been selected, either intentionally or because\n" +"it was part of a whole group, you will be asked to confirm that you really\n" +"want those servers to be installed. Under Mandrake Linux, any installed\n" +"servers are started by default at boot time. Even if they are safe and have\n" +"no known issues at the time the distribution was shipped, it may happen\n" +"that security holes are discovered after this version of Mandrake Linux was\n" +"finalized. If you do not know what a particular service is supposed to do\n" +"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" +"install the listed services and they will be started automatically by\n" +"default. !!\n" +"\n" +"The \"Automatic dependencies\" option simply disables the warning dialog\n" +"which appears whenever the installer automatically selects a package. This\n" +"occurs because it has determined that it needs to satisfy a dependency with\n" +"another package in order to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows to load the\n" +"package list chosen during a previous installation. Clicking on this icon\n" +"will ask you to insert a floppy disk previously created at the end of\n" +"another installation. See the second tip of the previous step on how to\n" +"create such a floppy disk." msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../help.pm_.c:171 msgid "" -"The internet superserver daemon (commonly called inetd) starts a\n" -"variety of other internet services as needed. It is responsible for starting\n" -"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n" -"all of the services it is responsible for." -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "the height of the progress bar" +"You are now able to set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click \"OK\".\n" +"The autodetection of network devices and modem will be launched. If this\n" +"detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" +"also choose not to configure the network, or do it later; in that case,\n" +"simply click the \"Cancel\" button.\n" +"\n" +"Available connections are: traditional modem, ISDN modem, ADSL connection,\n" +"cable modem, and finally a simple LAN connection (Ethernet).\n" +"\n" +"Here, we will not detail each configuration. Simply make sure that you have\n" +"all the parameters from your Internet Service Provider or system\n" +"administrator.\n" +"\n" +"You can consult the ``Starter Guide'' chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" +"installed and use the program described there to configure your connection.\n" +"\n" +"If you wish to configure the network later after installation, or if you\n" +"are finished configuring your network connection, click \"Cancel\"." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../help.pm_.c:193 msgid "" +"You may now choose which services you wish to start at boot time.\n" "\n" -"- Save via %s on host: %s\n" -"" -msgstr "" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Argentina" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Domain Name Server" -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Level:" -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points must begin with a leading /" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Choose your CD/DVD device" -msgstr "" - -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "CUPS server" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Postfix Mail Server" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without saving" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Yemen" -msgstr "" - -#: ../advertising/11-mnf.pl:1 -#, c-format -msgid "This product is available on the MandrakeStore Web site." +"Here are listed all the services available with the current installation.\n" +"Review them carefully and uncheck those which are not always needed at boot\n" +"time.\n" +"\n" +"You can get a short explanatory text about a service by selecting a\n" +"specific service. However, if you are not sure whether a service is useful\n" +"or not, it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you will probably not want to start any services which you do not\n" +"need. Please remember that several services can be dangerous if they are\n" +"enabled on a server. In general, select only the services you really need.\n" +"!!" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format +#: ../../help.pm_.c:210 msgid "" -"=> There are many things to choose from (%s).\n" -"" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Hard drive detection" -msgstr "" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "GMT - DrakClock" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" +"local time according to the time zone you selected. It is however possible\n" +"to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" +"hardware clock is the same as the system clock. This is useful when the\n" +"machine is hosting another operating system like Windows.\n" +"\n" +"The \"Automatic time synchronization\" option will automatically regulate\n" +"the clock by connecting to a remote time server on the Internet. In the\n" +"list that is presented, choose a server located near you. Of course you\n" +"must have a working Internet connection for this feature to work. It will\n" +"actually install on your machine a time server which can be optionally used\n" +"by other machines on your local network." msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format +#: ../../help.pm_.c:224 msgid "" -"An error occurred:\n" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely.\n" +"\n" +"You will be presented the list of available resolutions and color depth\n" +"available for your hardware. Choose the one that best suit your needs (you\n" +"will be able to change that after installation though). When you are\n" +"satisfied with the sample shown in the monitor, click \"OK\". A window will\n" +"then appear and ask you if you can see it.\n" +"\n" +"If you are doing an \"Expert\" installation, you will enter the X\n" +"configuration wizard. See the corresponding section of the manual for more\n" +"information about this wizard.\n" +"\n" +"If you can see the message during the test, and answer \"Yes\", then DrakX\n" +"will proceed to the next step. If you cannot see the message, it simply\n" +"means that the configuration was wrong and the test will automatically end\n" +"after 10 seconds, restoring the screen. Refer then to the video\n" +"configuration section of the user guide for more information on how to\n" +"configure your display." +msgstr "" + +#: ../../help.pm_.c:246 +msgid "" +"Finally, you will be asked whether you want to see the graphical interface\n" +"at boot. Note this question will be asked even if you chose not to test the\n" +"configuration. Obviously, you want to answer \"No\" if your machine is to\n" +"act as a server, or if you were not successful in getting the display\n" +"configured." +msgstr "" + +#: ../../help.pm_.c:253 +msgid "" +"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" +"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" +"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" +"should come back to this step for help in at least two situations:\n" +"\n" +" * when installing the bootloader, DrakX will rewrite the boot sector (\n" +"MBR) of your main disk (unless you are using another boot manager), to\n" +"allow you to start up with either Windows or GNU/Linux (assuming you have\n" +"Windows in your system). If you need to reinstall Windows, the Microsoft\n" +"install process will rewrite the boot sector, and then you will not be able\n" +"to start GNU/Linux!\n" +"\n" +" * if a problem arises and you cannot start up GNU/Linux from the hard\n" +"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" +"contains a fair number of system tools for restoring a system, which has\n" +"crashed due to a power failure, an unfortunate typing error, a typo in a\n" +"password, or any other reason.\n" +"\n" +"If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" +"floppy disk you will insert must be empty or contain data which you do not\n" +"need. You will not have to format it since DrakX will rewrite the whole\n" +"disk." +msgstr "" + +#: ../../help.pm_.c:277 +msgid "" +"You now need to choose where you want to install the Mandrake Linux\n" +"operating system on your hard drive. If your hard drive is empty or if an\n" +"existing operating system is using all the available space, you will need\n" +"to partition it. Basically, partitioning a hard drive consists of logically\n" +"dividing it to create space to install your new Mandrake Linux system.\n" +"\n" +"Because the partitioning process' effects are usually irreversible,\n" +"partitioning can be intimidating and stressful if you are an inexperienced\n" +"user. Fortunately, there is a wizard which simplifies this process. Before\n" +"beginning, please consult the manual and take your time.\n" +"\n" +"If you are running the installation in Expert mode, you will enter\n" +"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" +"fine-tune your partitions. See the DiskDrake section in the ``Starter\n" +"Guide''. From the installation interface, you can use the wizards as\n" +"described here by clicking the dialog's \"Wizard\" button.\n" +"\n" +"If partitions have already been defined, either from a previous\n" +"installation or from another partitioning tool, simply select those to\n" +"install your Linux system.\n" +"\n" +"If partitions are not defined, you will need to create them using the\n" +"wizard. Depending on your hard drive configuration, several options are\n" +"available.\n" +"\n" +" * \"Use free space\": this option will simply lead to an automatic\n" +"partitioning of your blank drive(s). You will not be prompted further;\n" +"\n" +" * \"Use existing partition\": the wizard has detected one or more existing\n" +"Linux partitions on your hard drive. If you want to use them, choose this\n" +"option. You will then be asked to choose the mount points associated to\n" +"each of the partitions. The legacy mount points are selected by default,\n" +"and you should generally keep them.\n" +"\n" +" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" +"installed on your hard drive and takes all the space available on it, you\n" +"have to create free space for Linux data. To do so, you can delete your\n" +"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" +"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" +"be performed without the loss of any data, provided you previously\n" +"defragment the Windows partition. Backing up your data won't hurt either..\n" +"This solution is recommended if you want to use both Mandrake Linux and\n" +"Microsoft Windows on the same computer.\n" "\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"than at the present time. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software;\n" "\n" -"%s\n" +" * \"Erase entire disk\": if you want to delete all data and all partitions\n" +"present on your hard drive and replace them with your new Mandrake Linux\n" +"system, choose this option. Be careful with this solution because you will\n" +"not be able to revert your choice after you confirm;\n" "\n" -"This may come from corrupted system configuration files\n" -"on the USB key, in this case removing them and then\n" -"rebooting Mandrake Move would fix the problem. To do\n" -"so, click on the corresponding button.\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" "\n" +" * \"Remove Windows\": this will simply erase everything on the drive and\n" +"begin fresh, partitioning everything from scratch. All data on your disk\n" +"will be lost;\n" "\n" -"You may also want to reboot and remove the USB key, or\n" -"examine its contents under another OS, or even have\n" -"a look at log files in console #3 and #4 to try to\n" -"guess what's happening." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You haven't selected any group of packages.\n" -"Please choose the minimal installation you want:" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * \"Expert mode\": choose this option if you want to manually partition\n" +"your hard drive. Be careful -- it is a powerful but dangerous option. You\n" +"can very easily lose all your data. Hence, do not choose this unless you\n" +"know what you are doing. To know how to use the DiskDrake utility used\n" +"here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" +"Guide''''" msgstr "" -#: ../../network/adsl.pm:1 -#, c-format +#: ../../help.pm_.c:347 msgid "" -"You need the Alcatel microcode.\n" -"You can provide it now via a floppy or your windows partition,\n" -"or skip and do it later." -msgstr "" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Please enter the WebDAV server URL" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Tajikistan" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Accept" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Description" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Please enter summary text." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Error opening %s for writing: %s" +"There you are. Installation is now completed and your GNU/Linux system is\n" +"ready to use. Just click \"OK\" to reboot the system. You can start\n" +"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" +"soon as the computer has booted up again.\n" +"\n" +"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" +"\n" +" * \"generate auto-install floppy\": to create an installation floppy disk\n" +"which will automatically perform a whole installation without the help of\n" +"an operator, similar to the installation you just configured.\n" +"\n" +" Note that two different options are available after clicking the button:\n" +"\n" +" * \"Replay\". This is a partially automated installation as the\n" +"partitioning step (and only this one) remains interactive;\n" +"\n" +" * \"Automated\". Fully automated installation: the hard disk is\n" +"completely rewritten, all data is lost.\n" +"\n" +" This feature is very handy when installing a great number of similar\n" +"machines. See the Auto install section on our web site;\n" +"\n" +" * \"Save packages selection\"(*): saves the package selection as done\n" +"previously. Then, when doing another installation, insert the floppy inside\n" +"the drive and run the installation going to the help screen by pressing on\n" +"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" +"\n" +"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" +"\"mformat a:\")" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../help.pm_.c:378 msgid "" -"Mouse type: %s\n" -"" -msgstr "" - -#: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 -#, c-format -msgid "Your card can have 3D hardware acceleration support with XFree %s." -msgstr "" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Choose a monitor" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Empty label not allowed" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (UK)" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "I can't add any more partition" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Size in MB: " -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Remote printer" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Please choose a language to use." +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting means creating a filesystem on it).\n" +"\n" +"At this time, you may wish to reformat some already existing partitions to\n" +"erase any data they contain. If you wish to do that, please select those\n" +"partitions as well.\n" +"\n" +"Please note that it is not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" +"reformat partitions containing data that you wish to keep (typically\n" +"\"/home\").\n" +"\n" +"Please be careful when selecting partitions. After formatting, all data on\n" +"the selected partitions will be deleted and you will not be able to recover\n" +"it.\n" +"\n" +"Click on \"OK\" when you are ready to format partitions.\n" +"\n" +"Click on \"Cancel\" if you want to choose another partition for your new\n" +"Mandrake Linux operating system installation.\n" +"\n" +"Click on \"Advanced\" if you wish to select partitions that will be checked\n" +"for bad blocks on the disk." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../help.pm_.c:404 msgid "" -"WARNING: this device has been previously configured to connect to the Internet.\n" -"Simply accept to keep this device configured.\n" -"Modifying the fields below will override this configuration." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "I can set up your computer to automatically log on one user." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Floppy format" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Generic Printers" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The scanners on this machine are available to other computers" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "First sector of the root partition" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Alternative drivers" +"Your new Mandrake Linux operating system is currently being installed.\n" +"Depending on the number of packages you will be installing and the speed of\n" +"your computer, this operation could take from a few minutes to a\n" +"significant amount of time.\n" +"\n" +"Please be patient." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../help.pm_.c:412 msgid "" +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Some bugs may have\n" +"been fixed, and security issues solved. To allow you to benefit from these\n" +"updates, you are now able to download them from the Internet. Choose\n" +"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" +"to install updated packages later.\n" "\n" -"Please check all options that you need.\n" -"" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Initrd" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Cape Verde" +"Choosing \"Yes\" displays a list of places from which updates can be\n" +"retrieved. Choose the one nearest you. Then a package-selection tree\n" +"appears: review the selection, and press \"Install\" to retrieve and\n" +"install the selected package(s), or \"Cancel\" to abort." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "whether this cpu has the Cyrix 6x86 Coma bug" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Loading printer configuration... Please wait" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Guam" -msgstr "" - -#: ../../scanner.pm:1 -#, c-format -msgid "Your scanner(s) will not be available for non-root users." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Options/Test" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format +#: ../../help.pm_.c:425 msgid "" -"This level is to be used with care. It makes your system more easy to use,\n" -"but very sensitive. It must not be used for a machine connected to others\n" -"or to the Internet. There is no password access." -msgstr "" - -#: ../../fs.pm:1 ../../fs.pm:1 -#, c-format -msgid "Mounting partition %s" -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "User name" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Userdrake" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to use for Linux4Win?" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "due to missing %s" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Test pages" +"Before continuing, you should read carefully the terms of the license. It\n" +"covers the whole Mandrake Linux distribution, and if you do not agree with\n" +"all the terms included in it, click on the \"Refuse\" button which will\n" +"immediately terminate the installation. To continue with the installation,\n" +"click on the \"Accept\" button." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Logical volume name " -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../help.pm_.c:432 msgid "" -"List of data to restore:\n" +"At this point, it is time to choose the security level desired for the\n" +"machine. As a rule of thumb, the more exposed the machine is, and the more\n" +"the data stored in it is crucial, the higher the security level should be.\n" +"However, a higher security level is generally obtained at the expense of\n" +"ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" +"get more information about the meaning of these levels.\n" "\n" -"" -msgstr "" - -#: ../../fs.pm:1 ../../fs.pm:1 -#, c-format -msgid "Checking %s" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "TCP/Socket Printer Options" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card mem (DMA)" -msgstr "" - -#: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Disconnecting from Internet " -msgstr "" - -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "France" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "browse" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking installed software..." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name missing!" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to enable printing on printers in the local network?\n" -"" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Turkey" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Alcatel speedtouch usb" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Number of buttons" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Vietnamese \"numeric row\" QWERTY" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Module" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred." -msgstr "" - -#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Hardware" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Ctrl and Alt keys simultaneously" -msgstr "" - -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "United States" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "User umask" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Default OS?" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Swiss (German layout)" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure all heads independently" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "NTP Server" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Sulogin(8) in single user level" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Load/Save on floppy" -msgstr "" - -#: ../../standalone/draksplash:1 ../../standalone/draksplash:1 -#, c-format -msgid "This theme does not yet have a bootsplash in %s !" +"If you do not know what to choose, keep the default option." msgstr "" -#: ../../pkgs.pm:1 -#, c-format -msgid "nice" -msgstr "" - -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Leaving in %d seconds" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Please choose which serial port your modem is connected to." -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Property" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Ghostscript" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN Configuration" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Ghana" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Path or Module required" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Advanced Options" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Configuration" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Coma bug" -msgstr "" - -#: ../../help.pm:1 -#, c-format +#: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" -"defined, either from a previous installation of GNU/Linux or by another\n" +"defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" @@ -4336,1716 +2913,949 @@ msgid "" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" -" * \"%s\": this option deletes all partitions on the selected hard drive\n" +" * \"Clear all\": this option deletes all partitions on the selected hard\n" +"drive;\n" "\n" -" * \"%s\": this option enables you to automatically create ext3 and swap\n" -"partitions in the free space of your hard drive\n" +" * \"Auto allocate\": this option enables to automatically create ext3 and\n" +"swap partitions on your hard drive's free space;\n" "\n" -"\"%s\": gives access to additional features:\n" +"\"More\": gives access to additional features:\n" "\n" -" * \"%s\": saves the partition table to a floppy. Useful for later\n" -"partition-table recovery if necessary. It is strongly recommended that you\n" -"perform this step.\n" +" * \"Save partition table\": saves the partition table to a floppy. Useful\n" +"for later partition-table recovery, if necessary. It is strongly\n" +"recommended to perform this step;\n" "\n" -" * \"%s\": allows you to restore a previously saved partition table from a\n" -"floppy disk.\n" +" * \"Restore partition table\": allows to restore a previously saved\n" +"partition table from a floppy disk;\n" "\n" -" * \"%s\": if your partition table is damaged, you can try to recover it\n" -"using this option. Please be careful and remember that it doesn't always\n" -"work.\n" +" * \"Rescue partition table\": if your partition table is damaged, you can\n" +"try to recover it using this option. Please be careful and remember that it\n" +"can fail;\n" "\n" -" * \"%s\": discards all changes and reloads the partition table that was\n" -"originally on the hard drive.\n" +" * \"Reload partition table\": discards all changes and loads your initial\n" +"partition table;\n" "\n" -" * \"%s\": unchecking this option will force users to manually mount and\n" -"unmount removable media such as floppies and CD-ROMs.\n" +" * \"Removable media automounting\": unchecking this option will force\n" +"users to manually mount and unmount removable medias such as floppies and\n" +"CD-ROMs.\n" "\n" -" * \"%s\": use this option if you wish to use a wizard to partition your\n" -"hard drive. This is recommended if you do not have a good understanding of\n" -"partitioning.\n" +" * \"Wizard\": use this option if you wish to use a wizard to partition\n" +"your hard drive. This is recommended if you do not have a good knowledge of\n" +"partitioning;\n" "\n" -" * \"%s\": use this option to cancel your changes.\n" +" * \"Undo\": use this option to cancel your changes;\n" "\n" -" * \"%s\": allows additional actions on partitions (type, options, format)\n" -"and gives more information about the hard drive.\n" +" * \"Toggle to normal/expert mode\": allows additional actions on\n" +"partitions (type, options, format) and gives more information;\n" "\n" -" * \"%s\": when you are finished partitioning your hard drive, this will\n" +" * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" -"When defining the size of a partition, you can finely set the partition\n" -"size by using the Arrow keys of your keyboard.\n" -"\n" "Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and the [Up/Down] arrows.\n" +"partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" -" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +" * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" -" * Ctrl-d to delete a partition\n" +" * Ctrl-d to delete a partition;\n" "\n" -" * Ctrl-m to set the mount point\n" +" * Ctrl-m to set the mount point.\n" "\n" -"To get information about the different file system types available, please\n" +"To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" +"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../help.pm_.c:513 msgid "" -"Graphic Card\n" +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose the one you want to resize in order to install your new\n" +"Mandrake Linux operating system.\n" "\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" "\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error installing packages:" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Lexmark inkjet configuration" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Undo" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Save partition table" -msgstr "" - -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "Finnish" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Macedonia" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "" -"The per-user sharing uses the group \"fileshare\". \n" -"You can use userdrake to add a user to this group." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovenian" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Authorize:\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" "\n" -"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" "\n" -"- only local ones if set to \"LOCAL\"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" "\n" -"- none if set to \"NONE\".\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" -"To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Libya" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Configuring scripts, installing software, starting servers..." -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer on parallel port #%s" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Please enter the wireless parameters for this card:" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" -"- Burn to CD" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Table" -msgstr "" - -#: ../../fs.pm:1 -#, c-format -msgid "I don't know how to format %s in type %s" -msgstr "" - -#: ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Model" -msgstr "" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "USB printer #%s" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Stop Server" -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" -"Select the theme for\n" -"lilo and bootsplash,\n" -"you can choose\n" -"them separately" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Modem" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Tuvalu" -msgstr "" - -#: ../../help.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Use auto detection" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"GPM adds mouse support to text-based Linux applications such the\n" -"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n" -"and includes support for pop-up menus on the console." -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Started on boot" -msgstr "" - -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "No password aging for" -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"The following options can be set to customize your\n" -"system security. If you need an explanation, look at the help tooltip.\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Automatically find available printers on remote machines" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "East Timor" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Tape Device" +#: ../../help.pm_.c:544 +msgid "Please be patient. This operation can take several minutes." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../help.pm_.c:547 msgid "" +"DrakX now needs to know if you want to perform a default (\"Recommended\")\n" +"installation or if you want to have greater control (\"Expert\") over your\n" +"installation. You can also choose to do a new installation or upgrade your\n" +"existing Mandrake Linux system:\n" "\n" -"- Save to Tape on device: %s" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Login name" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report unowned files" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing Foomatic..." -msgstr "" - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "Please log out and then use Ctrl-Alt-BackSpace" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "The network needs to be restarted. Do you want to restart it ?" -msgstr "" - -#: ../../standalone/drakbug:1 ../../standalone/drakbug:1 -#, c-format -msgid "Package: " -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't write /etc/sysconfig/bootsplash." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SECURITY WARNING!" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "StarOffice" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Operating frequency" -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "No, I don't want autologin" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Windows Migration tool" -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "All languages" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removing %s" +" * \"Install\": completely wipes out the old system. However, depending on\n" +"what is currently installed on your machine, you may be able to keep some\n" +"old partitions (Linux or otherwise) unchanged;\n" +"\n" +" * \"Upgrade\": this installation class allows to simply update the\n" +"packages currently installed on your Mandrake Linux system. It keeps your\n" +"hard drives' current partitions as well as user configurations. All other\n" +"configuration steps remain available, similar to a normal installation;\n" +"\n" +" * \"Upgrade Packages Only\": this new installation class allows you to\n" +"upgrade an existing Mandrake Linux system while keeping all system\n" +"configurations unchanged. Adding new packages to the current installation\n" +"is also possible.\n" +"\n" +"Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" +"or later.\n" +"\n" +"Depending on your GNU/Linux knowledge, select one of the following choices:\n" +"\n" +" * Recommended: choose this if you have never installed a GNU/Linux\n" +"operating system. The installation will be very easy and you will only be\n" +"asked a few questions;\n" +"\n" +" * Expert: if you have a good GNU/Linux understanding, you may wish to\n" +"perform a highly customized installation. Some of the decisions you will\n" +"have to make may be difficult if you do not have good GNU/Linux knowledge,\n" +"so it is not recommended that those without a fair amount of experience\n" +"select this installation class." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../help.pm_.c:582 msgid "" -"%s not found...\n" -"" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Testing your connection..." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cache size" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Passwords are now enabled, but use as a networked computer is still not recommended." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Start sector: " -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Congo (Brazzaville)" -msgstr "" - -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "The package %s needs to be installed. Do you want to install it?" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Read" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Seychelles" +"Normally, DrakX selects the right keyboard for you (depending on the\n" +"language you have chosen). However, you might not have a keyboard that\n" +"corresponds exactly to your language: for example, if you are an English\n" +"speaking Swiss person, you may still want your keyboard to be a Swiss\n" +"keyboard. Or if you speak English but are located in Quebec, you may find\n" +"yourself in the same situation. In both cases, you will have to go back to\n" +"this installation step and select an appropriate keyboard from the list.\n" +"\n" +"Click on the \"More\" button to be presented with the complete list of\n" +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-latin alphabet, you will be\n" +"asked in the next dialog to choose the key binding that will switch the\n" +"keyboard layout between the latin and non-latin layouts." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../help.pm_.c:598 msgid "" -"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n" +"The first step is to choose your preferred language.\n" "\n" -"For your printer Printerdrake has found:\n" +"Please choose your preferred language for installation and system usage.\n" "\n" -"%s" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Bad password on %s" +"Clicking on the \"Advanced\" button will allow you to select other\n" +"languages to be installed on your workstation. Selecting other languages\n" +"will install the language-specific files for system documentation and\n" +"applications. For example, if you host users from Spain on your machine,\n" +"select English as the main language in the tree view and in the Advanced\n" +"section, click on the box corresponding to \"Spanish|Spain\".\n" +"\n" +"Note that multiple languages may be installed. Once you have selected any\n" +"additional locales, click the \"OK\" button to continue.\n" +"\n" +"To switch from one language to the other, you can launch the\n" +"\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" +"language, or as a simple user to only change that user's default language." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../help.pm_.c:617 msgid "" +"DrakX generally detects the number of buttons your mouse possesses. If not,\n" +"it assumes you have a two-button mouse and will set it up for third-button\n" +"emulation. DrakX will automatically know whether it is a PS/2, serial or\n" +"USB mouse.\n" "\n" -"There is one unknown printer directly connected to your system" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right Control key" -msgstr "" - -#: ../../network/tools.pm:1 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Zambia" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Security Administrator (login or email)" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Sorry, we support only 2.4 kernels." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwerty)" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Under Devel ... please wait." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Egypt" -msgstr "" - -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Czech Republic" -msgstr "" - -#: ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Sound card" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Import Fonts" +"If you wish to specify a different type of mouse, select the appropriate\n" +"type from the provided list.\n" +"\n" +"If you choose a mouse other than the default, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct. If the mouse is not working well, press the space bar or [Return]\n" +"to \"Cancel\" and choose again.\n" +"\n" +"Sometimes, wheel mouses are not automatically detected. You will need to\n" +"manually select it in the list. Be sure to select the one corresponding to\n" +"the correct port it is attached to. After you have pressed the \"OK\"\n" +"button, a mouse image will be displayed. You then need to move the wheel of\n" +"your mouse to activate it correctly. Then test that all buttons and\n" +"movements are correct." msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format +#: ../../help.pm_.c:638 msgid "" -"You have one big MicroSoft Windows partition.\n" -"I suggest you first resize that partition\n" -"(click on it, then click on \"Resize\")" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Suppress Temporary Files" +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../help.pm_.c:642 msgid "" -"Congratulations, the network and Internet configuration is finished.\n" +"This is the most crucial decision in regards with the security of your\n" +"GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" +"system administrator and is the only one authorized to make updates, add\n" +"users, change the overall system configuration, and so on. In short,\n" +"\"root\" can do everything! That is why you must choose a password that is\n" +"difficult to guess -- DrakX will tell you if it is too easy. As you can\n" +"see, you can choose not to enter a password, but we strongly advise you\n" +"against this if only for one reason: do not think that because you booted\n" +"GNU/Linux that your other operating systems are safe from mistakes. Since\n" +"\"root\" can overcome all limitations and unintentionally erase all data on\n" +"partitions by carelessly accessing the partitions themselves, it is\n" +"important for it to be difficult to become \"root\".\n" "\n" -"" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Change partition type" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the \"root\" password -- it makes it too\n" +"easy to compromise a system.\n" +"\n" +"However, please do not make the password too long or complicated because\n" +"you must be able to remember it without too much effort.\n" +"\n" +"The password will not be displayed on screen as you type it in. Hence, you\n" +"will have to type the password twice to reduce the chance of a typing\n" +"error. If you do happen to make the same typing error twice, this\n" +"``incorrect'' password will have to be used the first time you connect.\n" +"\n" +"In Expert mode, you will be asked if you will be connecting to an\n" +"authentication server, like NIS or LDAP.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one as \"authentication\". If you have no\n" +"clue, ask your network administrator.\n" +"\n" +"If your computer is not connected to any administrated network, you will\n" +"want to choose \"Local files\" for authentication." msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../help.pm_.c:678 msgid "" -"Resolution\n" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" +"automated. In fact, DrakX analyzes the disk boot sector and acts\n" +"accordingly, depending on what it finds there:\n" "\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor." -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Network Options" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable msec hourly security check" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. Hence, you will be able to load either GNU/Linux or another\n" +"OS;\n" +"\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" +"one.\n" +"\n" +"if in doubt, DrakX will display a dialog with various options.\n" +"\n" +" * \"Bootloader to use\": you have three choices:\n" +"\n" +" * \"GRUB\": if you prefer grub (text menu);\n" +"\n" +" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" +"interface;\n" +"\n" +" * \"LILO with text menu\": if you prefer LILO with its text menu\n" +"interface.\n" +"\n" +" * \"Boot device\": in most cases, you will not change the default\n" +"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" +"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" +"\n" +" * \"Delay before booting the default image\": when rebooting the computer,\n" +"this is the delay granted to the user to choose -- in the bootloader menu,\n" +"another boot entry than the default one.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting\n" +"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" +"Linux system! Also, be sure you know what you do before changing any of the\n" +"options. !!\n" +"\n" +"Clicking the \"Advanced\" button in this dialog will offer many advanced\n" +"options, which are reserved for the expert user." msgstr "" -#: ../../standalone/drakboot:1 -#, c-format +#: ../../help.pm_.c:718 msgid "" -"Display theme\n" -"under console" -msgstr "" - -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on %s)" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "MM Series" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "A library which defends against buffer overflow and format string attacks." -msgstr "" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "average" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "New printer name" +"After you have configured the general bootloader parameters, the list of\n" +"boot options which will be available at boot time will be displayed.\n" +"\n" +"If there is another operating system installed on your machine, it will\n" +"automatically be added to the boot menu. Here, you can choose to fine-tune\n" +"the existing options. Select an entry and click \"Modify\" to modify or\n" +"remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" +"installation step.\n" +"\n" +"You may also not want to give access to these other operating systems to\n" +"anyone. In which case, you can delete the corresponding entries. But then,\n" +"you will need a boot disk in order to boot those other operating systems!" msgstr "" -#: ../../fs.pm:1 -#, c-format +#: ../../help.pm_.c:732 msgid "" -"Allow an ordinary user to mount the file system. The\n" -"name of the mounting user is written to mtab so that he can unmount the file\n" -"system again. This option implies the options noexec, nosuid, and nodev\n" -"(unless overridden by subsequent options, as in the option line\n" -"user,exec,dev,suid )." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Equatorial Guinea" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup System" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Build Backup" +"You must indicate where you wish to place the information required to boot\n" +"GNU/Linux.\n" +"\n" +"Unless you know exactly what you are doing, choose \"First sector of drive\n" +"(MBR)\"." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../help.pm_.c:739 msgid "" -"To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Currently, no alternative possibility is available" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwertz)" +"Here, we select a printing system for your computer. Other OSes may offer\n" +"you one, but Mandrake Linux offers two.\n" +"\n" +" * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" +"a direct connection to your printer and you want to be able to panic out of\n" +"printer jams, and you do not have networked printers. It will handle only\n" +"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" +"if this is your first voyage to GNU/Linux. You can change your choices\n" +"after installation by running PrinterDrake from the Mandrake Control Center\n" +"and clicking the expert button.\n" +"\n" +" * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" +"your local printer and also halfway-around the planet. It is simple and can\n" +"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" +"it is compatible with the systems that went before. It can do many tricks,\n" +"but the basic setup is almost as easy as \"pdq\". If you need this to\n" +"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" +"graphical front-ends for printing or choosing printer options." msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../help.pm_.c:759 msgid "" -"The routed daemon allows for automatic IP router table updated via\n" -"the RIP protocol. While RIP is widely used on small networks, more complex\n" -"routing protocols are needed for complex networks." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Write Config" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Kiribati" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Other (not drakbackup) keys in place already" +"DrakX now detects any IDE device present in your computer. It will also\n" +"scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection does not always detect a piece of hardware,\n" +"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" +"if you know that there is a SCSI card installed in your machine. You will\n" +"be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" +"have no SCSI hardware. If you are unsure, you can check the list of\n" +"hardware detected in your machine by selecting \"See hardware info\" and\n" +"clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" +"button to return to the SCSI interface question.\n" +"\n" +"If you have to manually specify your adapter, DrakX will ask if you want to\n" +"specify options for it. You should allow DrakX to probe the hardware for\n" +"the card-specific options which the hardware needs to initialize. This\n" +"usually works well.\n" +"\n" +"If DrakX is not able to probe for the options which need to be passed, you\n" +"will need to manually provide options to the driver." msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../help.pm_.c:781 msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" +"You can add additional entries for yaboot, either for other operating\n" +"systems, alternate kernels, or for an emergency boot image.\n" "\n" -"You will be presented with a list of different parameters to change to get\n" -"an optimal graphical display: Graphic Card\n" +"For other OSes, the entry consists only of a label and the \"root\"\n" +"partition.\n" "\n" -" The installer will normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose from this list the card you actually have installed.\n" +"For Linux, there are a few possible options:\n" "\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs.\n" +" * Label: this is simply the name you will have to type at the yaboot\n" +"prompt to select this boot option;\n" "\n" +" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" +"or a variation of vmlinux with an extension;\n" "\n" +" * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" -"Monitor\n" +" * Append: on Apple hardware, the kernel append option is used quite often\n" +"to assist in initializing video hardware, or to enable keyboard mouse\n" +"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" +"Apple mouse. The following are some examples:\n" "\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer.\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" +"hda=autotune\n" "\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" +" * Initrd: this option can be used either to load initial modules, before\n" +"the boot device is available, or to load a ramdisk image for an emergency\n" +"boot situation;\n" "\n" -"Resolution\n" +" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" +"need to allocate a large ramdisk, this option can be used;\n" "\n" -" Here you can choose the resolutions and color depths available for your\n" -"hardware. Choose the one that best suits your needs (you will be able to\n" -"change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor.\n" +" * Read-write: normally the \"root\" partition is initially brought up in\n" +"read-only, to allow a filesystem check before the system becomes ``live''.\n" +"Here, you can override this option;\n" "\n" +" * NoVideo: should the Apple video hardware prove to be exceptionally\n" +"problematic, you can select this option to boot in ``novideo'' mode, with\n" +"native frame buffer support;\n" "\n" +" * Default: selects this entry as being the default Linux selection,\n" +"selectable by just pressing ENTER at the yaboot prompt. This entry will\n" +"also be highlighted with a ``*'', if you press [Tab] to see the boot\n" +"selections." +msgstr "" + +#: ../../help.pm_.c:828 +msgid "" +"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" +"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" +"these other operating systems are correctly detected and installed. If this\n" +"is not the case, you can add an entry by hand in this screen. Be careful to\n" +"choose the correct parameters.\n" "\n" -"Test\n" +"Yaboot's main options are:\n" "\n" -" the system will try to open a graphical screen at the desired\n" -"resolution. If you can see the message during the test and answer \"%s\",\n" -"then DrakX will proceed to the next step. If you cannot see the message, it\n" -"means that some part of the autodetected configuration was incorrect and\n" -"the test will automatically end after 12 seconds, bringing you back to the\n" -"menu. Change settings until you get a correct graphical display.\n" +" * Init Message: a simple text message displayed before the boot prompt;\n" "\n" +" * Boot Device: indicates where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" +"to hold this information;\n" "\n" +" * Open Firmware Delay: unlike LILO, there are two delays available with\n" +"yaboot. The first delay is measured in seconds and at this point, you can\n" +"choose between CD, OF boot, MacOS or Linux;\n" "\n" -"Options\n" +" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" +"After selecting Linux, you will have this delay in 0.1 second before your\n" +"default kernel description is selected;\n" "\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Browse" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "CDROM" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Do you want to try to connect to the Internet now?" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Belgian" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you have an ISA sound card?" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system.\n" -"I cannot set up this connection type." -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Windows" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "Can't make screenshots before partitioning" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Name" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/Save _As" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)." -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "%s is not in the scanner database, configure it manually?" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Delay before booting default image" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Restrict command line options" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "East Europe" -msgstr "" - -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use free space" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "use dhcp" -msgstr "" - -#: ../../standalone/logdrake:1 ../../standalone/logdrake:1 -#, c-format -msgid "Mail alert" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Uzbekistan" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected %s" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _printers" -msgstr "" - -#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 -#, c-format -msgid "Finish" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Show automatically selected packages" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Togo" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "CPU flags reported by the kernel" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Something went wrong! - Is mkisofs installed?" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "16 MB" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "" -"We're going to add an UPS device.\n" +" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" +"at the first boot prompt;\n" "\n" -"Do you prefer autodetect UPS devices connected to this machine or ?" -msgstr "" - -#: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Please try again" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "The model is correct" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "FAT resizing failed: %s" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Individual package selection" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition is not resizeable" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Location" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable-hrc)" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Guatemala" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Journalised FS" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Ethernet cards promiscuity check" -msgstr "" - -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "This machine" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"DOS drive letter: %s (just a guess)\n" -"" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Bahrain" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select the files or directories and click on 'OK'" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit scsi modules" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "family of the cpu (eg: 6 for i686 class)" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Because you are doing a network installation, your network is already configured.\n" -"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n" -"" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run the daily security checks" -msgstr "" - -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Keyboard layout: %s\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines." -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Maltese (US)" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" -"Manager/Windows), and NCP (NetWare) mount points." -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "" -"The creation of the boot floppy has been successfully completed \n" -"" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Tvcard" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Toggle between normal/expert mode" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Size" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "GRUB" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Greenland" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+/FirstMouse+" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Thursday" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Not the correct tape label. Tape is labelled %s." -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"The setup of Internet Connection Sharing has already been done.\n" -"It's currently enabled.\n" +" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" +"Open Firmware at the first boot prompt;\n" "\n" -"What would you like to do?" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Delete All NBIs" +" * Default OS: you can select which OS will boot by default when the Open\n" +"Firmware Delay expires." msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../help.pm_.c:860 msgid "" -"This dialog allows you to fine tune your bootloader:\n" +"Here are presented various parameters concerning your machine. Depending on\n" +"your installed hardware, you may (or may not), see the following entries:\n" "\n" -" * \"%s\": there are three choices for your bootloader:\n" +" * \"Mouse\": check the current mouse configuration and click on the button\n" +"to change it if necessary;\n" "\n" -" * \"%s\": if you prefer grub (text menu).\n" +" * \"Keyboard\": check the current keyboard map configuration and click on\n" +"the button to change that if necessary;\n" "\n" -" * \"%s\": if you prefer LILO with its text menu interface.\n" +" * \"Timezone\": DrakX, by default, guesses your time zone from the\n" +"language you have chosen. But here again, as for the choice of a keyboard,\n" +"you may not be in the country for which the chosen language should\n" +"correspond. Hence, you may need to click on the \"Timezone\" button in\n" +"order to configure the clock according to the time zone you are in;\n" "\n" -" * \"%s\": if you prefer LILO with its graphical interface.\n" +" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" +"configuration wizard. Consult the correpsonding chapter of the ``Starter\n" +"Guide'' for more information on how to setup a new printer. The interface\n" +"presented there is similar to the one used at installation time;\n" "\n" -" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" -"you prefer, the bootloader can be installed on the second hard drive\n" -"(\"%s\"), or even on a floppy disk (\"%s\");\n" +" * \"Sound card\": if a sound card is detected on your system, it will be\n" +"displayed here.\n" "\n" -" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" -"given to the user at the console to select a boot entry other than the\n" -"default.\n" +" * \"TV card\": if a TV card is detected on your system, it will be\n" +"displayed here.\n" "\n" -"!! Beware that if you choose not to install a bootloader (by selecting\n" -"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" -"system! Be sure you know what you are doing before changing any of the\n" -"options. !!\n" -"\n" -"Clicking the \"%s\" button in this dialog will offer advanced options which\n" -"are normally reserved for the expert user." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set, send the mail report to this email address else send it to root." -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Which configuration of XFree do you want to have?" -msgstr "" - -#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "More" +" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" +"displayed here. You can click on the button to change the parameters\n" +"associated to it." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format +#: ../../help.pm_.c:891 msgid "" -"With this security level, the use of this system as a server becomes possible.\n" -"The security is now high enough to use the system as a server which can accept\n" -"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level." +"Choose the hard drive you want to erase in order to install your new\n" +"Mandrake Linux partition. Be careful, all data present on it will be lost\n" +"and will not be recoverable!" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Server Name" +#: ../../help.pm_.c:896 +msgid "" +"Click on \"OK\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" +"\n" +"Click on \"Cancel\" to stop this operation without losing any data and\n" +"partitions present on this hard drive." msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 +#: ../../install2.pm_.c:111 #, c-format -msgid "Account Password" +msgid "" +"Can't access kernel modules corresponding to your kernel (file %s is " +"missing), this generally means your boot floppy in not in sync with the " +"Installation medium (please create a newer boot floppy)" msgstr "" -#: ../../standalone/drakhelp:1 +#: ../../install2.pm_.c:167 #, c-format -msgid "" -"%s cannot be displayed \n" -". No Help entry of this type\n" -"" +msgid "You must also format %s" msgstr "" -#: ../../any.pm:1 +#: ../../install_any.pm_.c:423 #, c-format msgid "" -"You decided to install the bootloader on a partition.\n" -"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n" +"You have selected the following server(s): %s\n" "\n" -"On which drive are you booting?" +"\n" +"These servers are activated by default. They don't have any known security\n" +"issues, but some new could be found. In that case, you must make sure to " +"upgrade\n" +"as soon as possible.\n" +"\n" +"\n" +"Do you really want to install these servers?\n" msgstr "" -#: ../../install_interactive.pm:1 +#: ../../install_any.pm_.c:441 #, c-format msgid "" -"WARNING!\n" +"The following packages will be removed to allow upgrading your system: %s\n" "\n" -"DrakX will now resize your Windows partition. Be careful: this\n" -"operation is dangerous. If you have not already done so, you\n" -"first need to exit the installation, run \"chkdsk c:\" from a\n" -"Command Prompt under Windows (beware, running graphical program\n" -"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" -"Command Prompt!), optionally run defrag, then restart the\n" -"installation. You should also backup your data.\n" -"When sure, press Ok." +"\n" +"Do you really want to remove these packages?\n" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Tajik keyboard" +#: ../../install_any.pm_.c:471 +msgid "Can't use broadcast with no NIS domain" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_any.pm_.c:879 #, c-format -msgid "" -"You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n" -"Not all queues can be transferred due to the following reasons:\n" -"" +msgid "Insert a FAT formatted floppy in drive %s" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Font List" +#: ../../install_any.pm_.c:883 +msgid "This floppy is not FAT formatted" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../install_any.pm_.c:895 msgid "" -"You may need to change your Open Firmware boot-device to\n" -" enable the bootloader. If you don't see the bootloader prompt at\n" -" reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Then type: shut-down\n" -"At your next boot you should see the bootloader prompt." +"To use this saved packages selection, boot installation with ``linux " +"defcfg=floppy''" msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767 #, c-format -msgid "" -"You appear to have an OldWorld or Unknown\n" -" machine, the yaboot bootloader will not work for you.\n" -"The install will continue, but you'll\n" -" need to use BootX or some other means to boot your machine" +msgid "Error reading file %s" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../install_any.pm_.c:1040 msgid "" -"RTS/CTS adds a handshake before each packet transmission to make sure that the\n" -"channel is clear. This adds overhead, but increase performance in case of hidden\n" -"nodes or large number of active nodes. This parameters set the size of the\n" -"smallest packet for which the node sends RTS, a value equal to the maximum\n" -"packet size disable the scheme. You may also set this parameter to auto, fixed\n" -"or off." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Select file" +"An error occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_interactive.pm_.c:21 #, c-format -msgid "Choose the network or host on which the local printers should be made available:" +msgid "" +"Some hardware on your computer needs ``proprietary'' drivers to work.\n" +"You can find some information about them at: %s" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../install_interactive.pm_.c:56 msgid "" -"These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n" -"" +"You must have a root partition.\n" +"For this, create a partition (or click on an existing one).\n" +"Then choose action ``Mount point'' and set it to `/'" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Japan" +#: ../../install_interactive.pm_.c:61 +msgid "You must have a swap partition" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print option list" +#: ../../install_interactive.pm_.c:62 +msgid "" +"You don't have a swap partition.\n" +"\n" +"Continue anyway?" msgstr "" -#: ../../standalone/localedrake:1 -#, c-format -msgid "The change is done, but to be effective you must logout" +#: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169 +msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" -#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Country / Region" +#: ../../install_interactive.pm_.c:90 +msgid "Use free space" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Search servers" +#: ../../install_interactive.pm_.c:92 +msgid "Not enough free space to allocate new partitions" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NCP queue name missing!" +#: ../../install_interactive.pm_.c:100 +msgid "Use existing partitions" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Warning, another internet connection has been detected, maybe using your network" +#: ../../install_interactive.pm_.c:102 +msgid "There is no existing partition to use" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Cd-Rom labeled \"%s\"" +#: ../../install_interactive.pm_.c:109 +msgid "Use the Windows partition for loopback" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"Saves and restores system entropy pool for higher quality random\n" -"number generation." +#: ../../install_interactive.pm_.c:112 +msgid "Which partition do you want to use for Linux4Win?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CDRW media" +#: ../../install_interactive.pm_.c:114 +msgid "Choose the sizes" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "No new UPS devices was found" +#: ../../install_interactive.pm_.c:115 +msgid "Root partition size in MB: " msgstr "" -#: ../advertising/07-server.pl:1 -#, c-format -msgid "Turn your computer into a reliable server" +#: ../../install_interactive.pm_.c:116 +msgid "Swap partition size in MB: " msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check empty password in /etc/shadow" +#: ../../install_interactive.pm_.c:126 +msgid "Use the free space on the Windows partition" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid " (driver %s)" +#: ../../install_interactive.pm_.c:129 +msgid "Which partition do you want to resize?" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Start when requested" +#: ../../install_interactive.pm_.c:131 +msgid "Resizing Windows partition" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_interactive.pm_.c:134 #, c-format msgid "" -"Loopback file(s):\n" -" %s\n" -"" -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "I don't know" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", TCP/IP host \"%s\", port %s" +"The FAT resizer is unable to handle your partition, \n" +"the following error occured: %s" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format +#: ../../install_interactive.pm_.c:137 msgid "" -"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n" -"\n" -"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n" -"\n" -"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n" -"\n" -"Do you want to continue?" +"Your Windows partition is too fragmented. Please reboot your computer under " +"Windows, run the ``defrag'' utility, then restart the Mandrake Linux " +"installation." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Telugu" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format +#: ../../install_interactive.pm_.c:138 msgid "" +"WARNING!\n" "\n" -"\n" -"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Uninstall" -msgstr "" - -#: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connecting to Internet " -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid " (" +"DrakX will now resize your Windows partition. Be careful:\n" +"this operation is dangerous. If you have not already done\n" +"so, you should first exit the installation, run scandisk\n" +"under Windows (and optionally run defrag), then restart the\n" +"installation. You should also backup your data.\n" +"When sure, press Ok." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cpuid level" +#: ../../install_interactive.pm_.c:148 +msgid "Which size do you want to keep for Windows on" msgstr "" -#: ../../printer/main.pm:1 +#: ../../install_interactive.pm_.c:149 #, c-format -msgid "Novell server \"%s\", printer \"%s\"" +msgid "partition %s" msgstr "" -#: ../../keyboard.pm:1 +#: ../../install_interactive.pm_.c:156 #, c-format -msgid "Mongolian (cyrillic)" +msgid "FAT resizing failed: %s" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Add a module" +#: ../../install_interactive.pm_.c:171 +msgid "" +"There is no FAT partition to resize or to use as loopback (or not enough " +"space left)" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Local measure" +#: ../../install_interactive.pm_.c:177 +msgid "Erase entire disk" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Warning : IP address %s is usually reserved !" +#: ../../install_interactive.pm_.c:177 +msgid "Remove Windows(TM)" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "busmouse" +#: ../../install_interactive.pm_.c:180 +msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../install_interactive.pm_.c:183 #, c-format -msgid "" -" - Create Etherboot Enabled Boot Images:\n" -" \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n" -" \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n" -" \tinterface to help manage/customize these images. To create the file \n" -" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n" -" \tdhcpd.conf, you should create the etherboot images for at least one full kernel." +msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Account Login (user name)" +#: ../../install_interactive.pm_.c:191 +msgid "Custom disk partitioning" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Fdiv bug" +#: ../../install_interactive.pm_.c:195 +msgid "Use fdisk" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../install_interactive.pm_.c:198 #, c-format msgid "" -"drakfirewall configurator\n" -"\n" -"Make sure you have configured your Network/Internet access with\n" -"drakconnect before going any further." -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept broadcasted icmp echo" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Uruguay" +"You can now partition %s.\n" +"When you are done, don't forget to save using `w'" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Benin" +#: ../../install_interactive.pm_.c:227 +msgid "You don't have enough free space on your Windows partition" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "SMB/Windows server \"%s\", share \"%s\"" +#: ../../install_interactive.pm_.c:243 +msgid "I can't find any room for installing" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Path selection" +#: ../../install_interactive.pm_.c:246 +msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 +#: ../../install_interactive.pm_.c:250 #, c-format -msgid "Name/IP address of host:" +msgid "Partitioning failed: %s" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Monitor: %s\n" -"" +#: ../../install_interactive.pm_.c:260 +msgid "Bringing up the network" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Custom & system settings" +#: ../../install_interactive.pm_.c:265 +msgid "Bringing down the network" msgstr "" -#: ../../partition_table/raw.pm:1 -#, c-format +#: ../../install_steps.pm_.c:76 msgid "" -"Something bad is happening on your drive. \n" -"A test to check the integrity of data has failed. \n" -"It means writing anything on the disk will end up with random, corrupted data." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP missing!" +"An error occurred, but I don't know how to handle it nicely.\n" +"Continue at your own risk." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps.pm_.c:211 #, c-format -msgid "Please check all users that you want to include in your backup." +msgid "Duplicate mount point %s" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format +#: ../../install_steps.pm_.c:380 msgid "" -"The %s must be configured by printerdrake.\n" -"You can launch printerdrake from the Mandrake Control Center in Hardware section." -msgstr "" - -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Key isn't writable" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Bangladesh" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (cable)" -msgstr "" - -#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 -#, c-format -msgid "Initial tests" +"Some important packages didn't get installed properly.\n" +"Either your cdrom drive or your cdrom is defective.\n" +"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" +"\"\n" msgstr "" -#: ../../network/isdn.pm:1 +#: ../../install_steps.pm_.c:450 #, c-format -msgid "Continue" +msgid "Welcome to %s" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom Restore" +#: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769 +msgid "No floppy drive available" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_auto_install.pm_.c:76 +#: ../../install_steps_stdio.pm_.c:22 #, c-format -msgid "Saturday" +msgid "Entering step `%s'\n" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../install_steps_gtk.pm_.c:146 msgid "" -"\"%s\": if a sound card is detected on your system, it is displayed here.\n" -"If you notice the sound card displayed is not the one that is actually\n" -"present on your system, you can click on the button and choose another\n" -"driver." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set the root umask." -msgstr "" - -#: ../../install_any.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "Error reading file %s" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Script-based" -msgstr "" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "PLL setting:" -msgstr "" - -#: ../../install_interactive.pm:1 ../../install_steps.pm:1 -#, c-format -msgid "You must have a FAT partition mounted in /boot/efi" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " on " -msgstr "" - -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "The URL must begin with http:// or https://" +"Your system is low on resources. You may have some problem installing\n" +"Mandrake Linux. If that occurs, you can try a text install instead. For " +"this,\n" +"press `F1' when booting on CDROM, then enter `text'." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers." +#: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237 +msgid "Install Class" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Other OS (SunOS...)" +#: ../../install_steps_gtk.pm_.c:160 +msgid "Please choose one of the following classes of installation:" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Install/Upgrade" +#: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683 +msgid "Package Group Selection" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "%d packages" +#: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698 +msgid "Individual package selection" msgstr "" -#: ../../crypto.pm:1 ../../lang.pm:1 +#: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621 #, c-format -msgid "Costa Rica" +msgid "Total size: %d / %d MB" msgstr "" -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" -"Backup and Restore application\n" -"\n" -"--default : save default directories.\n" -"--debug : show all debug messages.\n" -"--show-conf : list of files or directories to backup.\n" -"--config-info : explain configuration file options (for non-X users).\n" -"--daemon : use daemon configuration. \n" -"--help : show this message.\n" -"--version : show version number.\n" -"" +#: ../../install_steps_gtk.pm_.c:334 +msgid "Bad package" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../install_steps_gtk.pm_.c:335 #, c-format -msgid "Domain Authentication Required" +msgid "Name: %s\n" msgstr "" -#: ../../security/level.pm:1 +#: ../../install_steps_gtk.pm_.c:336 #, c-format -msgid "Use libsafe for servers" +msgid "Version: %s\n" msgstr "" -#: ../../keyboard.pm:1 +#: ../../install_steps_gtk.pm_.c:337 #, c-format -msgid "Icelandic" +msgid "Size: %d KB\n" msgstr "" -#: ../../standalone.pm:1 +#: ../../install_steps_gtk.pm_.c:338 #, c-format -msgid "" -"\n" -"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] " +msgid "Importance: %s\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../install_steps_gtk.pm_.c:360 msgid "" -"Maximum size\n" -" allowed for Drakbackup (MB)" +"You can't select this package as there is not enough space left to install it" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Ad-hoc" +#: ../../install_steps_gtk.pm_.c:365 +msgid "The following packages are going to be installed" msgstr "" -#: ../../loopback.pm:1 -#, c-format -msgid "" -"Circular mounts %s\n" -"" +#: ../../install_steps_gtk.pm_.c:366 +msgid "The following packages are going to be removed" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Connection\n" -"time: " +#: ../../install_steps_gtk.pm_.c:378 +msgid "You can't select/unselect this package" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Martinique" +#: ../../install_steps_gtk.pm_.c:390 +msgid "This is a mandatory package, it can't be unselected" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "HardDrive / NFS" +#: ../../install_steps_gtk.pm_.c:392 +msgid "You can't unselect this package. It is already installed" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../install_steps_gtk.pm_.c:395 msgid "" -"Old user list:\n" -"" -msgstr "" - -#: ../../wizards.pm:1 -#, c-format -msgid "Installation failed" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Search Backups" +"This package must be upgraded.\n" +"Are you sure you want to deselect it?" msgstr "" -#: ../../modules/parameters.pm:1 -#, c-format -msgid "a number" +#: ../../install_steps_gtk.pm_.c:398 +msgid "You can't unselect this package. It must be upgraded" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "Swedish" +#: ../../install_steps_gtk.pm_.c:403 +msgid "Show automatically selected packages" msgstr "" -#. -PO: the %s is the driver type (scsi, network, sound,...) -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Which %s driver should I try?" +#: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261 +#: ../../install_steps_interactive.pm_.c:265 +#: ../../standalone/drakbackup_.c:4211 +msgid "Install" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "You will receive an alert if one of the selected services is no longer running" +#: ../../install_steps_gtk.pm_.c:407 +msgid "Load/Save on floppy" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Weekday" +#: ../../install_steps_gtk.pm_.c:408 +msgid "Updating package selection" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Filesystem types:" +#: ../../install_steps_gtk.pm_.c:413 +msgid "Minimal install" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Northern Mariana Islands" +#: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529 +msgid "Choose the packages you want to install" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on HP JetDirect" +#: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767 +msgid "Installing" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "none" +#: ../../install_steps_gtk.pm_.c:450 +msgid "Estimating" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Managed" +#: ../../install_steps_gtk.pm_.c:457 +msgid "Time remaining " msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Floppy" +#: ../../install_steps_gtk.pm_.c:469 +msgid "Please wait, preparing installation..." msgstr "" -#: ../../standalone/drakfont:1 +#: ../../install_steps_gtk.pm_.c:551 #, c-format -msgid "Ghostscript referencing" +msgid "%d packages" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../install_steps_gtk.pm_.c:556 #, c-format -msgid "Bootloader" +msgid "Installing package %s" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Authorize all services controlled by tcp_wrappers" +#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 +#: ../../install_steps_interactive.pm_.c:791 +#: ../../standalone/drakautoinst_.c:197 +msgid "Accept" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move" +#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 +#: ../../install_steps_interactive.pm_.c:791 +msgid "Refuse" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 +#: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792 #, c-format -msgid "Bootloader to use" +msgid "" +"Change your Cd-Rom!\n" +"\n" +"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " +"done.\n" +"If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server host" +#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612 +#: ../../install_steps_interactive.pm_.c:804 +#: ../../install_steps_interactive.pm_.c:808 +msgid "Go on anyway?" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Name Servers:" +#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804 +msgid "There was an error ordering packages:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Minute" +#: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808 +msgid "There was an error installing packages:" msgstr "" -#: ../../install_messages.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" @@ -6075,12088 +3885,8652 @@ msgid "" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" -"" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "" -"Linux Virtual Server, used to build a high-performance and highly\n" -"available server." -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Expert mode" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Micronesia" -msgstr "" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "4 billion colors (32 bits)" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Operating Mode" +#: ../../install_steps_interactive.pm_.c:67 +msgid "An error occurred" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "License" +#: ../../install_steps_interactive.pm_.c:85 +msgid "Do you really want to leave the installation?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to generate the keys." +#: ../../install_steps_interactive.pm_.c:112 +msgid "License agreement" msgstr "" -#: ../../standalone/draksec:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:113 msgid "" -"Here, you can setup the security level and administrator of your machine.\n" -"\n" +"Introduction\n" "\n" -"The Security Administrator is the one who will receive security alerts if the\n" -"'Security Alerts' option is set. It can be a username or an email.\n" +"The operating system and the different components available in the Mandrake " +"Linux distribution \n" +"shall be called the \"Software Products\" hereafter. The Software Products " +"include, but are not \n" +"restricted to, the set of programs, methods, rules and documentation related " +"to the operating \n" +"system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" -"The Security Level menu allows you to select one of the six preconfigured security levels\n" -"provided with msec. These levels range from poor security and ease of use, to\n" -"paranoid config, suitable for very sensitive server applications:\n" +"1. License Agreement\n" "\n" +"Please read this document carefully. This document is a license agreement " +"between you and \n" +"MandrakeSoft S.A. which applies to the Software Products.\n" +"By installing, duplicating or using the Software Products in any manner, you " +"explicitly \n" +"accept and fully agree to conform to the terms and conditions of this " +"License. \n" +"If you disagree with any portion of the License, you are not allowed to " +"install, duplicate or use \n" +"the Software Products. \n" +"Any attempt to install, duplicate or use the Software Products in a manner " +"which does not comply \n" +"with the terms and conditions of this License is void and will terminate " +"your rights under this \n" +"License. Upon termination of the License, you must immediately destroy all " +"copies of the \n" +"Software Products.\n" "\n" -"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but very\n" -"easy to use security level. It should only be used for machines not connected to\n" -"any network and that are not accessible to everybody.\n" "\n" +"2. Limited Warranty\n" "\n" -"<span foreground=\"royalblue3\">Standard</span>: This is the standard security\n" -"recommended for a computer that will be used to connect to the Internet as a\n" -"client.\n" +"The Software Products and attached documentation are provided \"as is\", " +"with no warranty, to the \n" +"extent permitted by law.\n" +"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " +"law, be liable for any special,\n" +"incidental, direct or indirect damages whatsoever (including without " +"limitation damages for loss of \n" +"business, interruption of business, financial loss, legal fees and penalties " +"resulting from a court \n" +"judgment, or any other consequential loss) arising out of the use or " +"inability to use the Software \n" +"Products, even if MandrakeSoft S.A. has been advised of the possibility or " +"occurence of such \n" +"damages.\n" "\n" +"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " +"COUNTRIES\n" +"\n" +"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " +"in no circumstances, be \n" +"liable for any special, incidental, direct or indirect damages whatsoever " +"(including without \n" +"limitation damages for loss of business, interruption of business, financial " +"loss, legal fees \n" +"and penalties resulting from a court judgment, or any other consequential " +"loss) arising out \n" +"of the possession and use of software components or arising out of " +"downloading software components \n" +"from one of Mandrake Linux sites which are prohibited or restricted in some " +"countries by local laws.\n" +"This limited liability applies to, but is not restricted to, the strong " +"cryptography components \n" +"included in the Software Products.\n" "\n" -"<span foreground=\"royalblue3\">High</span>: There are already some\n" -"restrictions, and more automatic checks are run every night.\n" "\n" +"3. The GPL License and Related Licenses\n" "\n" -"<span foreground=\"royalblue3\">Higher</span>: The security is now high enough\n" -"to use the system as a server which can accept connections from many clients. If\n" -"your machine is only a client on the Internet, you should choose a lower level.\n" +"The Software Products consist of components created by different persons or " +"entities. Most \n" +"of these components are governed under the terms and conditions of the GNU " +"General Public \n" +"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " +"licenses allow you to use, \n" +"duplicate, adapt or redistribute the components which they cover. Please " +"read carefully the terms \n" +"and conditions of the license agreement for each component before using any " +"component. Any question \n" +"on a component license should be addressed to the component author and not " +"to MandrakeSoft.\n" +"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " +"Documentation written \n" +"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " +"documentation for \n" +"further details.\n" "\n" "\n" -"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the previous\n" -"level, but the system is entirely closed and security features are at their\n" -"maximum" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format -msgid "Sagem (using pppoa) usb" -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting the printing system at boot time" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Do you want to start the connection at boot?" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Processor ID" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound trouble shooting" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwerty layout)" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Add Printer" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" +"4. Intellectual Property Rights\n" "\n" -"Drakbackup activities via CD:\n" +"All rights to the components of the Software Products belong to their " +"respective authors and are \n" +"protected by intellectual property and copyright laws applicable to software " +"programs.\n" +"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " +"Products, as a whole or in \n" +"parts, by all means and for all purposes.\n" +"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " +"MandrakeSoft S.A. \n" "\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to install the printing system %s on a system running in the %s security level.\n" "\n" -"This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n" +"5. Governing Laws \n" "\n" -"Do you really want to configure printing on this machine?" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host \"%s\", port %s" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This partition can't be used for loopback" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "File already exists. Use it?" -msgstr "" - -#: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 -#, c-format -msgid "received: " -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right Alt key" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the list of alternative drivers for this sound card" +"If any portion of this agreement is held void, illegal or inapplicable by a " +"court judgment, this \n" +"portion is excluded from this contract. You remain bound by the other " +"applicable sections of the \n" +"agreement.\n" +"The terms and conditions of this License are governed by the Laws of " +"France.\n" +"All disputes on the terms of this license will preferably be settled out of " +"court. As a last \n" +"resort, the dispute will be referred to the appropriate Courts of Law of " +"Paris - France.\n" +"For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway" +#: ../../install_steps_interactive.pm_.c:197 +msgid "Are you sure you refuse the licence?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Tonga" +#: ../../install_steps_interactive.pm_.c:217 +#: ../../install_steps_interactive.pm_.c:995 +#: ../../standalone/keyboarddrake_.c:25 +msgid "Keyboard" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Tunisia" +#: ../../install_steps_interactive.pm_.c:218 +msgid "Please choose your keyboard layout." msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scanner sharing" +#: ../../install_steps_interactive.pm_.c:219 +msgid "Here is the full list of keyboards available" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Click on a device in the left tree in order to display its information here." +#: ../../install_steps_interactive.pm_.c:237 +msgid "Which installation class do you want?" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "" -"We are configuring the \"%s\" UPS from \"%s\".\n" -"Please fill in its name, its driver and its port." +#: ../../install_steps_interactive.pm_.c:241 +msgid "Install/Update" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid autologin." +#: ../../install_steps_interactive.pm_.c:241 +msgid "Is this an install or an update?" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "XawTV isn't installed!" +#: ../../install_steps_interactive.pm_.c:250 +msgid "Recommended" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Do not include critical files (passwd, group, fstab)" +#: ../../install_steps_interactive.pm_.c:253 +#: ../../install_steps_interactive.pm_.c:256 +msgid "Expert" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "old static device name used in dev package" +#: ../../install_steps_interactive.pm_.c:261 +#: ../../install_steps_interactive.pm_.c:265 +msgid "Upgrade" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable the logging of IPv4 strange packets" +#: ../../install_steps_interactive.pm_.c:261 +#: ../../install_steps_interactive.pm_.c:265 +msgid "Upgrade packages only" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "This label is already used" +#: ../../install_steps_interactive.pm_.c:282 +msgid "Please choose the type of your mouse." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." +#: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52 +msgid "Mouse Port" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek (polytonic)" +#: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53 +msgid "Please choose on which serial port your mouse is connected to." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After formatting partition %s, all data on this partition will be lost" +#: ../../install_steps_interactive.pm_.c:297 +msgid "Buttons emulation" msgstr "" -#: ../../standalone/livedrake:1 -#, c-format -msgid "" -"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid live upgrade." +#: ../../install_steps_interactive.pm_.c:299 +msgid "Button 2 Emulation" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use group id for execution" +#: ../../install_steps_interactive.pm_.c:300 +msgid "Button 3 Emulation" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Choose the default user:" +#: ../../install_steps_interactive.pm_.c:321 +msgid "Configuring PCMCIA cards..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Gabon" +#: ../../install_steps_interactive.pm_.c:321 +msgid "PCMCIA" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected." +#: ../../install_steps_interactive.pm_.c:328 +msgid "Configuring IDE" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "" -"Mandrake Linux can support multiple languages. Select\n" -"the languages you would like to install. They will be available\n" -"when your installation is complete and you restart your system." +#: ../../install_steps_interactive.pm_.c:328 +msgid "IDE" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Directory (or module) to put the backup on this host." +#: ../../install_steps_interactive.pm_.c:345 +msgid "No partition available" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Domain" +#: ../../install_steps_interactive.pm_.c:348 +msgid "Scanning partitions to find mount points" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Precise RAM size if needed (found %d MB)" +#: ../../install_steps_interactive.pm_.c:356 +msgid "Choose the mount points" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:386 msgid "" -"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" -"automated. DrakX will analyze the disk boot sector and act according to\n" -"what it finds there:\n" -"\n" -" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" -"boot sector. This way you will be able to load either GNU/Linux or another\n" -"OS.\n" -"\n" -" * if a grub or LILO boot sector is found, it will replace it with a new\n" -"one.\n" -"\n" -"If it cannot make a determination, DrakX will ask you where to place the\n" -"bootloader." +"No free space for 1MB bootstrap! Install will continue, but to boot your " +"system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 2 (optional)" +#: ../../install_steps_interactive.pm_.c:395 +msgid "No root partition found to perform an upgrade" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Boot device" +#: ../../install_steps_interactive.pm_.c:396 +msgid "Root Partition" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "ACL name" +#: ../../install_steps_interactive.pm_.c:397 +msgid "What is the root partition (/) of your system?" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to resize?" +#: ../../install_steps_interactive.pm_.c:411 +msgid "You need to reboot for the partition table modifications to take place" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "United States Minor Outlying Islands" +#: ../../install_steps_interactive.pm_.c:435 +msgid "Choose the partitions you want to format" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Djibouti" +#: ../../install_steps_interactive.pm_.c:436 +msgid "Check bad blocks?" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "A tool to monitor your logs" +#: ../../install_steps_interactive.pm_.c:463 +msgid "Formatting partitions" msgstr "" -#: ../../printer/data.pm:1 +#: ../../install_steps_interactive.pm_.c:465 #, c-format -msgid "LPD" +msgid "Creating and formatting file %s" msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../install_steps_interactive.pm_.c:470 #, c-format msgid "" -"Graphics card: %s\n" -"" +"Failed to check filesystem %s. Do you want to repair the errors? (beware, " +"you can loose data)" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/Set as _Default" +#: ../../install_steps_interactive.pm_.c:472 +msgid "Not enough swap space to fulfill installation, please add some" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept icmp echo" +#: ../../install_steps_interactive.pm_.c:479 +msgid "Looking for available packages and rebuilding rpm database..." msgstr "" -#: ../../bootloader.pm:1 -#, c-format -msgid "Yaboot" +#: ../../install_steps_interactive.pm_.c:480 +msgid "Looking for available packages..." msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech CC Series with Wheel emulation" +#: ../../install_steps_interactive.pm_.c:483 +msgid "Looking at packages already installed..." msgstr "" -#: ../../partition_table.pm:1 -#, c-format -msgid "Extended partition not supported on this platform" +#: ../../install_steps_interactive.pm_.c:487 +msgid "Finding packages to upgrade..." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../install_steps_interactive.pm_.c:505 #, c-format -msgid "Splash selection" +msgid "" +"Your system does not have enough space left for installation or upgrade (%d " +"> %d)" msgstr "" -#: ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "ISDN Configuration" +#: ../../install_steps_interactive.pm_.c:541 +msgid "" +"Please choose load or save package selection on floppy.\n" +"The format is the same as auto_install generated floppies." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "high" +#: ../../install_steps_interactive.pm_.c:543 +msgid "Load from floppy" msgstr "" -#: ../../standalone/drakgw:1 ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing" +#: ../../install_steps_interactive.pm_.c:543 +msgid "Save on floppy" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Choose file" +#: ../../install_steps_interactive.pm_.c:547 +msgid "Loading from floppy" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Summary: " +#: ../../install_steps_interactive.pm_.c:547 +msgid "Package selection" msgstr "" -#: ../../network/shorewall.pm:1 -#, c-format -msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation." +#: ../../install_steps_interactive.pm_.c:552 +msgid "Insert a floppy containing package selection" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Photo Card Access on \"%s\"" +#: ../../install_steps_interactive.pm_.c:634 +msgid "Selected size is larger than available space" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Daily security check" +#: ../../install_steps_interactive.pm_.c:649 +msgid "Type of install" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:650 msgid "" -"Do you want to enable printing on the printers mentioned above or on printers in the local network?\n" -"" +"You haven't selected any group of packages.\n" +"Please choose the minimal installation you want:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer default settings" +#: ../../install_steps_interactive.pm_.c:653 +msgid "With X" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Generic PS2 Wheel Mouse" +#: ../../install_steps_interactive.pm_.c:655 +msgid "With basic documentation (recommended!)" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the WP flag in the CR0 register of the cpu enforce write proctection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)" +#: ../../install_steps_interactive.pm_.c:656 +msgid "Truly minimal install (especially no urpmi)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing old printer \"%s\"..." +#: ../../install_steps_interactive.pm_.c:741 +msgid "" +"If you have all the CDs in the list below, click Ok.\n" +"If you have none of those CDs, click Cancel.\n" +"If only some CDs are missing, unselect them, then click Ok." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_interactive.pm_.c:746 #, c-format -msgid "Select a device !" +msgid "Cd-Rom labeled \"%s\"" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove selected server" +#: ../../install_steps_interactive.pm_.c:767 +msgid "Preparing installation" msgstr "" -#: ../../network/adsl.pm:1 +#: ../../install_steps_interactive.pm_.c:776 #, c-format -msgid "Sagem (using dhcp) usb" +msgid "" +"Installing package %s\n" +"%d%%" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "French Southern Territories" +#: ../../install_steps_interactive.pm_.c:822 +msgid "Post-install configuration" msgstr "" -#: ../../standalone/drakups:1 +#: ../../install_steps_interactive.pm_.c:828 #, c-format -msgid "Add an UPS device" +msgid "Please insert the Boot floppy used in drive %s" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_interactive.pm_.c:834 #, c-format -msgid "the vendor name of the processor" +msgid "Please insert the Update Modules floppy in drive %s" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:861 msgid "" -" - Maintain %s:\n" -" \tFor users to be able to log into the system from a diskless client, their entry in\n" -" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" -" \thelps in this respect by adding or removing system users from this file." -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "All data on this partition should be backed-up" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Installing package %s" +"You now have the opportunity to download updated packages. These packages\n" +"have been released after the distribution was released. They may\n" +"contain security or bug fixes.\n" +"\n" +"To download these packages, you will need to have a working Internet \n" +"connection.\n" +"\n" +"Do you want to install the updates ?" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking device and configuring HPOJ..." +#: ../../install_steps_interactive.pm_.c:876 +msgid "" +"Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "To have more partitions, please delete one to be able to create an extended partition" +#: ../../install_steps_interactive.pm_.c:881 +msgid "Choose a mirror from which to get the packages" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists." +#: ../../install_steps_interactive.pm_.c:890 +msgid "Contacting the mirror to get the list of available packages..." msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Choose packages to install" +#: ../../install_steps_interactive.pm_.c:918 +msgid "Which is your timezone?" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "ALL existing partitions and their data will be lost on drive %s" +#: ../../install_steps_interactive.pm_.c:923 +msgid "Hardware clock set to GMT" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Your system does not have enough space left for installation or upgrade (%d > %d)" +#: ../../install_steps_interactive.pm_.c:924 +msgid "Automatic time synchronization (using NTP)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users." +#: ../../install_steps_interactive.pm_.c:931 +msgid "NTP Server" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" -"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" -"information on how to setup a new printer. The interface presented there is\n" -"similar to the one used during installation." +#: ../../install_steps_interactive.pm_.c:965 +#: ../../install_steps_interactive.pm_.c:972 +msgid "Remote CUPS server" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bhutan" +#: ../../install_steps_interactive.pm_.c:966 +msgid "No printer" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface" +#: ../../install_steps_interactive.pm_.c:982 +msgid "Do you have an ISA sound card?" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Disconnection from Internet failed." +#: ../../install_steps_interactive.pm_.c:984 +msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Reading printer data..." +#: ../../install_steps_interactive.pm_.c:986 +msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Korean keyboard" +#: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27 +msgid "Summary" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Not connected" +#: ../../install_steps_interactive.pm_.c:994 +msgid "Mouse" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "No internet connection configured" +#: ../../install_steps_interactive.pm_.c:996 +msgid "Timezone" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Greek" +#: ../../install_steps_interactive.pm_.c:997 +#: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844 +msgid "Printer" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saint Kitts and Nevis" +#: ../../install_steps_interactive.pm_.c:999 +msgid "ISDN card" msgstr "" -#: ../../mouse.pm:1 ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse with Wheel emulation" +#: ../../install_steps_interactive.pm_.c:1003 +#: ../../install_steps_interactive.pm_.c:1009 +msgid "Sound card" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Enable OF Boot?" +#: ../../install_steps_interactive.pm_.c:1012 +msgid "TV card" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use JFS for partitions smaller than 16MB" +#: ../../install_steps_interactive.pm_.c:1055 +#: ../../install_steps_interactive.pm_.c:1080 +#: ../../install_steps_interactive.pm_.c:1084 +msgid "LDAP" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Erase your RW media (1st Session)" +#: ../../install_steps_interactive.pm_.c:1056 +#: ../../install_steps_interactive.pm_.c:1080 +#: ../../install_steps_interactive.pm_.c:1093 +msgid "NIS" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Monitor VertRefresh: %s\n" -"" +#: ../../install_steps_interactive.pm_.c:1057 +#: ../../install_steps_interactive.pm_.c:1080 +#: ../../install_steps_interactive.pm_.c:1101 +#: ../../install_steps_interactive.pm_.c:1107 +msgid "Windows Domain" msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Mount point" +#: ../../install_steps_interactive.pm_.c:1058 +#: ../../install_steps_interactive.pm_.c:1080 +msgid "Local files" msgstr "" -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "" -"An error occurred:\n" -"%s\n" -"Try to change some parameters" +#: ../../install_steps_interactive.pm_.c:1067 +#: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24 +msgid "Set root password" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "TCP/IP host \"%s\", port %s" +#: ../../install_steps_interactive.pm_.c:1069 +msgid "No password" msgstr "" -#: ../../standalone/drakperm:1 +#: ../../install_steps_interactive.pm_.c:1074 #, c-format -msgid "User :" +msgid "This password is too short (it must be at least %d characters long)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore system" +#: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72 +#: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144 +msgid "Authentication" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Select the network interface to configure:" +#: ../../install_steps_interactive.pm_.c:1088 +msgid "Authentication LDAP" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "These are the machines on which the locally connected scanner(s) should be available:" +#: ../../install_steps_interactive.pm_.c:1089 +msgid "LDAP Base dn" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "The DHCP end ip" +#: ../../install_steps_interactive.pm_.c:1090 +msgid "LDAP Server" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Another one" +#: ../../install_steps_interactive.pm_.c:1096 +msgid "Authentication NIS" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup" +#: ../../install_steps_interactive.pm_.c:1097 +msgid "NIS Domain" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Colombia" +#: ../../install_steps_interactive.pm_.c:1098 +msgid "NIS Server" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1104 msgid "" -"Current configuration of `%s':\n" -"\n" -"Network: %s\n" -"IP address: %s\n" -"IP attribution: %s\n" -"Driver: %s" +"For this to work for a W2K PDC, you will probably need to have the admin " +"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" +"add and reboot the server.\n" +"You will also need the username/password of a Domain Admin to join the " +"machine to the Windows(TM) domain.\n" +"If networking is not yet enabled, Drakx will attempt to join the domain " +"after the network setup step.\n" +"Should this setup fail for some reason and domain authentication is not " +"working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " +"Domain, and Admin Username/Password, after system boot.\n" +"The command 'wbinfo -t' will test whether your authentication secrets are " +"good." msgstr "" -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play" +#: ../../install_steps_interactive.pm_.c:1106 +msgid "Authentication Windows Domain" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Reunion" +#: ../../install_steps_interactive.pm_.c:1108 +msgid "Domain Admin User Name" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Details" +#: ../../install_steps_interactive.pm_.c:1109 +msgid "Domain Admin Password" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "For security reasons, it will be disconnected now." +#: ../../install_steps_interactive.pm_.c:1144 +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"SILO on your system, or another operating system removes SILO, or SILO " +"doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures.\n" +"\n" +"If you want to create a bootdisk for your system, insert a floppy in the " +"first\n" +"drive and press \"Ok\"." msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Synchronization tool" +#: ../../install_steps_interactive.pm_.c:1160 +msgid "First floppy drive" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Checking your system..." +#: ../../install_steps_interactive.pm_.c:1161 +msgid "Second floppy drive" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print" +#: ../../install_steps_interactive.pm_.c:1162 +#: ../../printer/printerdrake.pm_.c:2397 +msgid "Skip" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm_.c:1167 #, c-format msgid "" -"Insert the tape with volume label %s\n" -" in the tape drive device %s" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Mongolia" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"LILO (or grub) on your system, or another operating system removes LILO, or " +"LILO doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures. Would you like to create a bootdisk for your system?\n" +"%s" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1173 msgid "" -"Mounted\n" -"" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Configure CUPS" +"\n" +"\n" +"(WARNING! You're using XFS for your root partition,\n" +"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" +"because XFS needs a very large driver)." msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Graphical Interface" +#: ../../install_steps_interactive.pm_.c:1181 +msgid "Sorry, no floppy drive available" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Users" +#: ../../install_steps_interactive.pm_.c:1185 +msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../install_steps_interactive.pm_.c:1189 #, c-format -msgid "Bitrate (in b/s)" +msgid "Insert a floppy in %s" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Encryption key for %s" +#: ../../install_steps_interactive.pm_.c:1192 +msgid "Creating bootdisk..." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you want to recover your system?" +#: ../../install_steps_interactive.pm_.c:1199 +msgid "Preparing bootloader..." msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1210 msgid "" -"The portmapper manages RPC connections, which are used by\n" -"protocols such as NFS and NIS. The portmap server must be running on machines\n" -"which act as servers for protocols which make use of the RPC mechanism." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Detected hardware" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Connected through a serial port or an usb cable" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Mauritius" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Myanmar (Burmese)" -msgstr "" - -#: ../../fs.pm:1 -#, c-format -msgid "Enabling swap partition %s" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no FAT partition to use as loopback (or not enough space left)" +"You appear to have an OldWorld or Unknown\n" +" machine, the yaboot bootloader will not work for you.\n" +"The install will continue, but you'll\n" +" need to use BootX to boot your machine" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (old)" +#: ../../install_steps_interactive.pm_.c:1216 +msgid "Do you want to use aboot?" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1219 msgid "" -"A printer named \"%s\" already exists under %s. \n" -"Click \"Transfer\" to overwrite it.\n" -"You can also type a new name or skip this printer." -msgstr "" - -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "Find the solutions of your problems via MandrakeSoft's online support platform." +"Error installing aboot, \n" +"try to force installation even if that destroys the first partition?" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", host \"%s\", port %s" +#: ../../install_steps_interactive.pm_.c:1226 +msgid "Installing bootloader" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Monaco" +#: ../../install_steps_interactive.pm_.c:1232 +msgid "Installation of bootloader failed. The following error occured:" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../install_steps_interactive.pm_.c:1240 #, c-format msgid "" -" - Create etherboot floppies/CDs:\n" -" \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n" -" \tor CD to initate the boot sequence. drakTermServ will help generate these\n" -" \timages, based on the NIC in the client machine.\n" -" \t\t\n" -" \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n" -" \t\t\n" -" \tcat /usr/lib/etherboot/floppyload.bin \\\n" -" \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" -" \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Partitioning failed: %s" -msgstr "" - -#: ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../swap.pm:1 -#, c-format -msgid "%s formatting of %s failed" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Canada (cable)" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Floppy creation completed" +"You may need to change your Open Firmware boot-device to\n" +" enable the bootloader. If you don't see the bootloader prompt at\n" +" reboot, hold down Command-Option-O-F at reboot and enter:\n" +" setenv boot-device %s,\\\\:tbxi\n" +" Then type: shut-down\n" +"At your next boot you should see the bootloader prompt." msgstr "" -#: ../../help.pm:1 ../../help.pm:1 +#: ../../install_steps_interactive.pm_.c:1274 +#: ../../standalone/drakautoinst_.c:76 #, c-format -msgid "Upgrade" +msgid "Insert a blank floppy in drive %s" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Workstation" +#: ../../install_steps_interactive.pm_.c:1278 +msgid "Creating auto install floppy..." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1289 msgid "" -"Installing package %s\n" -"%d%%" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Kyrgyzstan" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device on USB" +"Some steps are not completed.\n" +"\n" +"Do you really want to quit now?" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 +#: ../../install_steps_interactive.pm_.c:1300 #, c-format msgid "" -"We didn't detect any USB key on your system. If you\n" -"plug in an USB key now, Mandrake Move will have the ability\n" -"to transparently save the data in your home directory and\n" -"system wide configuration, for next boot on this computer\n" -"or another one. Note: if you plug in a key now, wait several\n" -"seconds before detecting again.\n" +"Congratulations, installation is complete.\n" +"Remove the boot media and press return to reboot.\n" +"\n" +"\n" +"For information on fixes which are available for this release of Mandrake " +"Linux,\n" +"consult the Errata available from:\n" +"\n" +"\n" +"%s\n" "\n" "\n" -"You may also proceed without an USB key - you'll still be\n" -"able to use Mandrake Move as a normal live Mandrake\n" -"Operating System." +"Information on configuring your system is available in the post\n" +"install chapter of the Official Mandrake Linux User's Guide." msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "With basic documentation" +#: ../../install_steps_interactive.pm_.c:1313 +msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Anacron is a periodic command scheduler." +#: ../../install_steps_interactive.pm_.c:1318 +msgid "Generate auto install floppy" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format +#: ../../install_steps_interactive.pm_.c:1320 msgid "" -"You must have a root partition.\n" -"For this, create a partition (or click on an existing one).\n" -"Then choose action ``Mount point'' and set it to `/'" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Western Sahara" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Proxy should be http://..." -msgstr "" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "South Africa" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Eject tape after the backup" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Etherboot Floppy/ISO" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Modify printer configuration" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose a partition" +"The auto install can be fully automated if wanted,\n" +"in that case it will take over the hard drive!!\n" +"(this is meant for installing on another box).\n" +"\n" +"You may prefer to replay the installation.\n" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Edit current rule" +#: ../../install_steps_interactive.pm_.c:1325 +msgid "Automated" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s" +#: ../../install_steps_interactive.pm_.c:1325 +msgid "Replay" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Average" +#: ../../install_steps_interactive.pm_.c:1328 +msgid "Save packages selection" msgstr "" -#: ../../mouse.pm:1 +#: ../../install_steps_newt.pm_.c:20 #, c-format -msgid "Please test the mouse" +msgid "Mandrake Linux Installation %s" msgstr "" -#: ../../fs.pm:1 -#, c-format +#. -PO This string must fit in a 80-char wide text screen +#: ../../install_steps_newt.pm_.c:33 msgid "" -"Do not update inode access times on this file system\n" -"(e.g, for faster access on the news spool to speed up news servers)." -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "3 buttons with Wheel emulation" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Sticky-bit" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Other Media" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan+" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup system files" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Sector" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Qatar" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "LDAP Base dn" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't select this package as there is not enough space left to install it" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "generate auto-install floppy" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Dialing mode" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "File sharing" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "The alert wizard had unexpectly failled:" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Clean /tmp at each boot" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Malawi" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "local config: false" -msgstr "" - -#: ../../scanner.pm:1 -#, c-format -msgid "Could not set permissions of firmware file %s!" +" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "System settings" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please choose your type of mouse." -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "running" +#: ../../interactive.pm_.c:87 +msgid "kdesu missing" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "class of hardware device" +#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 +msgid "consolehelper missing" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "These are the machines and networks on which the locally connected printer(s) should be available:" +#: ../../interactive.pm_.c:152 +msgid "Choose a file" msgstr "" -#: ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "United Kingdom" +#: ../../interactive.pm_.c:318 +msgid "Advanced" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Indonesia" +#: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117 +msgid "Basic" msgstr "" -#: ../../standalone/draksec:1 ../../standalone/draksec:1 -#, c-format -msgid "default" +#: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158 +#: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434 +msgid "<- Previous" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "France [SECAM]" +#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 +#: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087 +#: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143 +msgid "Next" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "restrict" +#: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 +msgid "Bad choice, try again\n" msgstr "" -#: ../../pkgs.pm:1 +#: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format -msgid "must have" +msgid "Your choice? (default %s) " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" -"CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n" -"" +"Entries you'll have to fill:\n" +"%s" msgstr "" -#: ../../lang.pm:1 +#: ../../interactive/stdio.pm_.c:70 #, c-format -msgid "Senegal" +msgid "Your choice? (0/1, default `%s') " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../interactive/stdio.pm_.c:95 #, c-format -msgid "Command line" +msgid "Button `%s': %s" msgstr "" -#: ../advertising/08-store.pl:1 -#, c-format -msgid "Our full range of Linux solutions, as well as special offers on products and other \"goodies\", are available on our e-store:" +#: ../../interactive/stdio.pm_.c:96 +msgid "Do you want to click on this button?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "March" +#: ../../interactive/stdio.pm_.c:105 +msgid " enter `void' for void entry" msgstr "" -#: ../../any.pm:1 +#: ../../interactive/stdio.pm_.c:105 #, c-format -msgid "access to administrative files" +msgid "Your choice? (default `%s'%s) " msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../interactive/stdio.pm_.c:123 #, c-format -msgid "" -"Error during sendmail.\n" -" Your report mail was not sent.\n" -" Please configure sendmail" +msgid "=> There are many things to choose from (%s).\n" msgstr "" -#: ../../fs.pm:1 -#, c-format +#: ../../interactive/stdio.pm_.c:126 msgid "" -"Do not allow set-user-identifier or set-group-identifier\n" -"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" -"have suidperl(1) installed.)" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Montserrat" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Automatic dependencies" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Swap" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Custom settings" +"Please choose the first number of the 10-range you wish to edit,\n" +"or just hit Enter to proceed.\n" +"Your choice? " msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 +#: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" -"The USB key seems to have write protection enabled, but we can't safely\n" -"unplug it now.\n" -"\n" -"\n" -"Click the button to reboot the machine, unplug it, remove write protection,\n" -"plug the key again, and launch Mandrake Move again." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Other" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "TV card" +"=> Notice, a label changed:\n" +"%s" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on SMB/Windows 95/98/NT server" +#: ../../interactive/stdio.pm_.c:146 +msgid "Re-submit" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Configure CUPS" +#: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188 +msgid "Czech (QWERTZ)" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid ", " +#: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190 +msgid "German" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit lspci" +#: ../../keyboard.pm_.c:155 +msgid "Dvorak" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove selected host/network" +#: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 +msgid "Spanish" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another." +#: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 +msgid "Finnish" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Uzbek (cyrillic)" +#: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200 +msgid "French" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"Here you can choose the key or key combination that will \n" -"allow switching between the different keyboard layouts\n" -"(eg: latin and non latin)" +#: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233 +msgid "Norwegian" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Network Hotplugging" +#: ../../keyboard.pm_.c:160 +msgid "Polish" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, reports check result to tty." +#: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241 +msgid "Russian" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From CD" +#: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243 +msgid "Swedish" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"You are about to configure your computer to share its Internet connection.\n" -"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)." +#: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259 +msgid "UK keyboard" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Please choose which network adapter you want to use to connect to Internet." +#: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260 +msgid "US keyboard" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo memory card access on your HP multi-function device" +#: ../../keyboard.pm_.c:167 +msgid "Albanian" msgstr "" -#: ../advertising/09-mdksecure.pl:1 -#, c-format -msgid "Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux" +#: ../../keyboard.pm_.c:168 +msgid "Armenian (old)" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Authors: " +#: ../../keyboard.pm_.c:169 +msgid "Armenian (typewriter)" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now disabled." +#: ../../keyboard.pm_.c:170 +msgid "Armenian (phonetic)" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "About DrakUPS" +#: ../../keyboard.pm_.c:175 +msgid "Azerbaidjani (latin)" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, verify checksum of the suid/sgid files." +#: ../../keyboard.pm_.c:177 +msgid "Belgian" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Latin American" +#: ../../keyboard.pm_.c:178 +msgid "Bengali" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Japanese text printing mode" +#: ../../keyboard.pm_.c:179 +msgid "Bulgarian (phonetic)" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Old device file" +#: ../../keyboard.pm_.c:180 +msgid "Bulgarian (BDS)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Info: " +#: ../../keyboard.pm_.c:181 +msgid "Brazilian (ABNT-2)" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Button `%s': %s" +#: ../../keyboard.pm_.c:184 +msgid "Bosnian" msgstr "" -#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakups:1 ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 ../../standalone/service_harddrake:1 -#, c-format -msgid "Please wait" +#: ../../keyboard.pm_.c:185 +msgid "Belarusian" msgstr "" -#: ../../mouse.pm:1 ../../mouse.pm:1 -#, c-format -msgid "Genius NetMouse" +#: ../../keyboard.pm_.c:186 +msgid "Swiss (German layout)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "None" +#: ../../keyboard.pm_.c:187 +msgid "Swiss (French layout)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The entered IP is not correct.\n" -"" +#: ../../keyboard.pm_.c:189 +msgid "Czech (QWERTY)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please be sure that the cron daemon is included in your services." +#: ../../keyboard.pm_.c:191 +msgid "German (no dead keys)" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Ethernet Card" +#: ../../keyboard.pm_.c:192 +msgid "Devanagari" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Delete selected printer" +#: ../../keyboard.pm_.c:193 +msgid "Danish" msgstr "" -#: ../../services.pm:1 ../../ugtk2.pm:1 -#, c-format -msgid "Info" +#: ../../keyboard.pm_.c:194 +msgid "Dvorak (US)" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "" -"An error occured while deleting the \"%s\" network interface:\n" -"\n" -"%s" +#: ../../keyboard.pm_.c:195 +msgid "Dvorak (Norwegian)" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Install" +#: ../../keyboard.pm_.c:196 +msgid "Dvorak (Swedish)" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"Click on \"%s\" if you want to delete all data and partitions present on\n" -"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" -"to recover any data and partitions present on this hard drive, including\n" -"any Windows data.\n" -"\n" -"Click on \"%s\" to stop this operation without losing any data and\n" -"partitions present on this hard drive." +#: ../../keyboard.pm_.c:197 +msgid "Estonian" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Exit install" +#: ../../keyboard.pm_.c:201 +msgid "Georgian (\"Russian\" layout)" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Need a key to save your data" +#: ../../keyboard.pm_.c:202 +msgid "Georgian (\"Latin\" layout)" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Everything has been configured.\n" -"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP)." +#: ../../keyboard.pm_.c:203 +msgid "Greek" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Remote CUPS server" +#: ../../keyboard.pm_.c:204 +msgid "Gujarati" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Sun - Mouse" +#: ../../keyboard.pm_.c:205 +msgid "Gurmukhi" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"There is only one configured network adapter on your system:\n" -"\n" -"%s\n" -"\n" -"I am about to setup your Local Area Network with that adapter." +#: ../../keyboard.pm_.c:206 +msgid "Hungarian" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit cpuinfo" +#: ../../keyboard.pm_.c:207 +msgid "Croatian" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Minimal install" +#: ../../keyboard.pm_.c:208 +msgid "Israeli" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Ethiopia" +#: ../../keyboard.pm_.c:209 +msgid "Israeli (Phonetic)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "YES" +#: ../../keyboard.pm_.c:210 +msgid "Iranian" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable \"crontab\" and \"at\" for users" +#: ../../keyboard.pm_.c:211 +msgid "Icelandic" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Devanagari" +#: ../../keyboard.pm_.c:212 +msgid "Italian" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"- pci devices: this gives the PCI slot, device and function of this card\n" -"- eide devices: the device is either a slave or a master device\n" -"- scsi devices: the scsi bus and the scsi device ids" +#: ../../keyboard.pm_.c:213 +msgid "Inuktitut" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Total size: %d / %d MB" +#: ../../keyboard.pm_.c:214 +msgid "Japanese 106 keys" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "disabled" +#: ../../keyboard.pm_.c:217 +msgid "Korean keyboard" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Search for new scanners" +#: ../../keyboard.pm_.c:218 +msgid "Latin American" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Disabling servers..." +#: ../../keyboard.pm_.c:219 +msgid "Laotian" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Installation of %s failed. The following error occured:" +#: ../../keyboard.pm_.c:220 +msgid "Lithuanian AZERTY (old)" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." +#: ../../keyboard.pm_.c:222 +msgid "Lithuanian AZERTY (new)" msgstr "" -#: ../../install_any.pm:1 -#, c-format -msgid "" -"You have selected the following server(s): %s\n" -"\n" -"\n" -"These servers are activated by default. They don't have any known security\n" -"issues, but some new ones could be found. In that case, you must make sure\n" -"to upgrade as soon as possible.\n" -"\n" -"\n" -"Do you really want to install these servers?\n" -"" +#: ../../keyboard.pm_.c:223 +msgid "Lithuanian \"number row\" QWERTY" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Network printer (TCP/Socket)" +#: ../../keyboard.pm_.c:224 +msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup User files..." +#: ../../keyboard.pm_.c:225 +msgid "Latvian" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Install system" +#: ../../keyboard.pm_.c:226 +msgid "Malayalam" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "First DNS Server (optional)" +#: ../../keyboard.pm_.c:227 +msgid "Macedonian" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternatively, you can specify a device name/file name in the input line" +#: ../../keyboard.pm_.c:228 +msgid "Myanmar (Burmese)" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "" -"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" -"is greater than 3 in /etc/security/msec/security.conf, creates the\n" -"symlink /etc/security/msec/server to point to\n" -"/etc/security/msec/server.<SERVER_LEVEL>.\n" -"\n" -"The /etc/security/msec/server is used by chkconfig --add to decide to\n" -"add a service if it is present in the file during the installation of\n" -"packages." +#: ../../keyboard.pm_.c:229 +msgid "Mongolian (cyrillic)" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Russian (Phonetic)" +#: ../../keyboard.pm_.c:230 +msgid "Maltese (UK)" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "dhcpd Config..." +#: ../../keyboard.pm_.c:231 +msgid "Maltese (US)" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "LILO/grub Installation" +#: ../../keyboard.pm_.c:232 +msgid "Dutch" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Israeli" +#: ../../keyboard.pm_.c:234 +msgid "Polish (qwerty layout)" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on server \"%s\"" +#: ../../keyboard.pm_.c:235 +msgid "Polish (qwertz layout)" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Floppy can be removed now" +#: ../../keyboard.pm_.c:236 +msgid "Portuguese" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Truly minimal install" +#: ../../keyboard.pm_.c:237 +msgid "Canadian (Quebec)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Denmark" +#: ../../keyboard.pm_.c:239 +msgid "Romanian (qwertz)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving partition..." +#: ../../keyboard.pm_.c:240 +msgid "Romanian (qwerty)" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "(This) DHCP Server IP" +#: ../../keyboard.pm_.c:242 +msgid "Russian (Yawerty)" msgstr "" -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Test of the configuration" +#: ../../keyboard.pm_.c:244 +msgid "Slovenian" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing %s ..." +#: ../../keyboard.pm_.c:245 +msgid "Slovakian (QWERTZ)" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"If you told the installer that you wanted to individually select packages,\n" -"it will present a tree containing all packages classified by groups and\n" -"subgroups. While browsing the tree, you can select entire groups,\n" -"subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right to let you know the purpose of the package.\n" -"\n" -"!! If a server package has been selected, either because you specifically\n" -"chose the individual package or because it was part of a group of packages,\n" -"you will be asked to confirm that you really want those servers to be\n" -"installed. By default Mandrake Linux will automatically start any installed\n" -"services at boot time. Even if they are safe and have no known issues at\n" -"the time the distribution was shipped, it is entirely possible that that\n" -"security holes were discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" -"install the listed services and they will be started automatically by\n" -"default during boot. !!\n" -"\n" -"The \"%s\" option is used to disable the warning dialog which appears\n" -"whenever the installer automatically selects a package to resolve a\n" -"dependency issue. Some packages have relationships between each other such\n" -"that installation of a package requires that some other program is also\n" -"rerquired to be installed. The installer can determine which packages are\n" -"required to satisfy a dependency to successfully complete the installation.\n" -"\n" -"The tiny floppy disk icon at the bottom of the list allows you to load a\n" -"package list created during a previous installation. This is useful if you\n" -"have a number of machines that you wish to configure identically. Clicking\n" -"on this icon will ask you to insert a floppy disk previously created at the\n" -"end of another installation. See the second tip of last step on how to\n" -"create such a floppy." +#: ../../keyboard.pm_.c:246 +msgid "Slovakian (QWERTY)" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "Port:" +#: ../../keyboard.pm_.c:248 +msgid "Serbian (cyrillic)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose your filesystem encryption key" +#: ../../keyboard.pm_.c:250 +msgid "Tamil (Unicode)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Sierra Leone" +#: ../../keyboard.pm_.c:251 +msgid "Tamil (TSCII)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Botswana" +#: ../../keyboard.pm_.c:252 +msgid "Thai keyboard" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Andorra" +#: ../../keyboard.pm_.c:254 +msgid "Tajik keyboard" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "(default value: %s)" +#: ../../keyboard.pm_.c:255 +msgid "Turkish (traditional \"F\" model)" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." +#: ../../keyboard.pm_.c:256 +msgid "Turkish (modern \"Q\" model)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (Letter)" +#: ../../keyboard.pm_.c:258 +msgid "Ukrainian" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"DHCP Server Configuration.\n" -"\n" -"Here you can select different options for the DHCP server configuration.\n" -"If you don't know the meaning of an option, simply leave it as it is.\n" -"\n" -"" +#: ../../keyboard.pm_.c:261 +msgid "US keyboard (international)" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Choose an X server" +#: ../../keyboard.pm_.c:262 +msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 -#, c-format -msgid "Copying to memory to allow removing the CDROM" +#: ../../keyboard.pm_.c:263 +msgid "Yugoslavian (latin)" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Swap partition size in MB: " +#: ../../keyboard.pm_.c:270 +msgid "Right Alt key" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No changes to backup!" +#: ../../keyboard.pm_.c:271 +msgid "Both Shift keys simultaneously" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Formatted\n" -"" +#: ../../keyboard.pm_.c:272 +msgid "Control and Shift keys simultaneously" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Type of install" +#: ../../keyboard.pm_.c:273 +msgid "CapsLock key" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer \"%s\" on SMB/Windows server \"%s\"" +#: ../../keyboard.pm_.c:274 +msgid "Ctrl and Alt keys simultaneously" msgstr "" -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated numbers" +#: ../../keyboard.pm_.c:275 +msgid "Alt and Shift keys simultaneously" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"The rusers protocol allows users on a network to identify who is\n" -"logged in on other responding machines." +#: ../../keyboard.pm_.c:276 +msgid "\"Menu\" key" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Automatic Steps Configuration" +#: ../../keyboard.pm_.c:277 +msgid "Left \"Windows\" key" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Barbados" +#: ../../keyboard.pm_.c:278 +msgid "Right \"Windows\" key" msgstr "" -#: ../advertising/02-community.pl:1 +#: ../../loopback.pm_.c:32 #, c-format -msgid "Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!" +msgid "Circular mounts %s\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to backup..." +#: ../../lvm.pm_.c:103 +msgid "Remove the logical volumes first\n" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format +#: ../../modules.pm_.c:290 msgid "" -"Connection failed.\n" -"Verify your configuration in the Mandrake Control Center." +"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received" +#: ../../modules/interactive.pm_.c:16 +msgid "You can configure each parameter of the module here." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable su only from the wheel group members or for any user" +#: ../../modules/parameters.pm_.c:18 +msgid "modinfo is not available" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_New" +#: ../../modules/parameters.pm_.c:50 +msgid "a number" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../modules/parameters.pm_.c:52 #, c-format -msgid "The DNS Server IP" +msgid "%d comma separated numbers" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../modules/parameters.pm_.c:52 #, c-format -msgid "IP Range End:" +msgid "%d comma separated strings" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "High" +#: ../../modules/parameters.pm_.c:54 +msgid "comma separated numbers" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Add a new printer to the system" +#: ../../modules/parameters.pm_.c:54 +msgid "comma separated strings" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "NoVideo" +#: ../../mouse.pm_.c:25 +msgid "Sun - Mouse" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "this field describes the device" +#: ../../mouse.pm_.c:32 +msgid "Logitech MouseMan+" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Adding printer to Star Office/OpenOffice.org/GIMP" +#: ../../mouse.pm_.c:33 +msgid "Generic PS2 Wheel Mouse" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printers" +#: ../../mouse.pm_.c:34 +msgid "GlidePoint" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Installation image directory" +#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 +msgid "Kensington Thinking Mouse" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "NIS Server" +#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 +msgid "Genius NetMouse" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Port: %s" +#: ../../mouse.pm_.c:38 +msgid "Genius NetScroll" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Spain" +#: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 +msgid "Microsoft Explorer" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "local config: %s" +#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 +msgid "1 button" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "This user name has already been added" +#: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 +msgid "Generic 2 Button Mouse" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed." +#: ../../mouse.pm_.c:47 +msgid "Wheel" msgstr "" -#: ../../interactive.pm:1 -#, c-format -msgid "Choose a file" +#: ../../mouse.pm_.c:51 +msgid "serial" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Apply" +#: ../../mouse.pm_.c:54 +msgid "Generic 3 Button Mouse" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Auto-detect available ports" +#: ../../mouse.pm_.c:55 +msgid "Microsoft IntelliMouse" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "San Marino" +#: ../../mouse.pm_.c:56 +msgid "Logitech MouseMan" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently disabled" +#: ../../mouse.pm_.c:57 +msgid "Mouse Systems" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Belgium" +#: ../../mouse.pm_.c:59 +msgid "Logitech CC Series" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"The current security level is %s.\n" -"Select permissions to see/edit" +#: ../../mouse.pm_.c:60 +msgid "Logitech MouseMan+/FirstMouse+" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Kuwait" +#: ../../mouse.pm_.c:62 +msgid "MM Series" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Choose the window manager to run:" +#: ../../mouse.pm_.c:63 +msgid "MM HitTablet" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "December" +#: ../../mouse.pm_.c:64 +msgid "Logitech Mouse (serial, old C7 type)" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "sub generation of the cpu" +#: ../../mouse.pm_.c:68 +msgid "busmouse" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "First Time Wizard" +#: ../../mouse.pm_.c:71 +msgid "2 buttons" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Taiwan" +#: ../../mouse.pm_.c:72 +msgid "3 buttons" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Pakistan" +#: ../../mouse.pm_.c:75 +msgid "none" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "please wait, parsing file: %s" +#: ../../mouse.pm_.c:77 +msgid "No mouse" msgstr "" -#: ../../install_steps.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "" -"An error occurred, but I don't know how to handle it nicely.\n" -"Continue at your own risk." +#: ../../mouse.pm_.c:490 +msgid "Please test the mouse" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Importance: " +#: ../../mouse.pm_.c:491 +msgid "To activate the mouse," msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program." +#: ../../mouse.pm_.c:492 +msgid "MOVE YOUR WHEEL!" msgstr "" -#: ../../standalone/drakperm:1 ../../standalone/drakperm:1 -#, c-format -msgid "Permissions" +#: ../../my_gtk.pm_.c:65 +msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider name (ex provider.net)" +#: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435 +msgid "Finish" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"Your system is low on resources. You may have some problem installing\n" -"Mandrake Linux. If that occurs, you can try a text install instead. For this,\n" -"press `F1' when booting on CDROM, then enter `text'." +#: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057 +#: ../../ugtk2.pm_.c:435 +msgid "Next ->" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use the Windows partition for loopback" +#: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926 +msgid "Is this correct?" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (typewriter)" +#: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011 +msgid "Info" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Floppy Disk" +#: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036 +msgid "Expand Tree" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connection type: " +#: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037 +msgid "Collapse Tree" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Graphical interface" +#: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038 +msgid "Toggle between flat and group sorted" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Chad" +#: ../../network/adsl.pm_.c:23 +msgid "use pppoe" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "India" +#: ../../network/adsl.pm_.c:24 +msgid "use pptp" msgstr "" -#: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s with 3D hardware acceleration" +#: ../../network/adsl.pm_.c:25 +msgid "use dhcp" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Slovakia" +#: ../../network/adsl.pm_.c:26 +msgid "Alcatel speedtouch usb" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Singapore" +#: ../../network/adsl.pm_.c:27 +msgid "Sagem (using pppoe) usb" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cambodia" +#: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36 +msgid "Connect to the Internet" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../network/adsl.pm_.c:30 msgid "" -"Monitor HorizSync: %s\n" -"" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Interval cron not available as non-root" +"The most common way to connect with adsl is pppoe.\n" +"Some connections use pptp, a few ones use dhcp.\n" +"If you don't know, choose 'use pppoe'" msgstr "" -#: ../../standalone/drakperm:1 ../../standalone/drakperm:1 -#, c-format -msgid "Path" +#: ../../network/adsl.pm_.c:166 +msgid "" +"You need the alcatel microcode.\n" +"Download it at\n" +"http://www.speedtouchdsl.com/dvrreg_lx.htm\n" +"and copy the mgmt.o in /usr/share/speedtouch" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "NOT FOUND" +#: ../../network/drakfirewall.pm_.c:12 +msgid "Web Server" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer." +#: ../../network/drakfirewall.pm_.c:17 +msgid "Domain Name Server" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"The printing system (%s) will not be started automatically when the machine is booted.\n" -"\n" -"It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n" -"\n" -"Do you want to have the automatic starting of the printing system turned on again?" +#: ../../network/drakfirewall.pm_.c:32 +msgid "Mail Server" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Printer %s\n" -"What do you want to modify on this printer?" +#: ../../network/drakfirewall.pm_.c:37 +msgid "POP and IMAP Server" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Add host" +#: ../../network/drakfirewall.pm_.c:111 +msgid "No network card" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format +#: ../../network/drakfirewall.pm_.c:129 msgid "" -"If you really think that you know which driver is the right one for your card\n" -"you can pick one in the above list.\n" +"drakfirewall configurator\n" "\n" -"The current driver for your \"%s\" sound card is \"%s\" " +"This configures a personal firewall for this Mandrake Linux machine.\n" +"For a powerful dedicated firewall solution, please look to the\n" +"specialized MandrakeSecurity Firewall distribution." msgstr "" -#: ../../any.pm:1 -#, c-format +#: ../../network/drakfirewall.pm_.c:135 msgid "" -"Would you like to allow users to share some of their directories?\n" -"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n" +"drakfirewall configurator\n" "\n" -"\"Custom\" permit a per-user granularity.\n" -"" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Please choose load or save package selection on floppy.\n" -"The format is the same as auto_install generated floppies." +"Make sure you have configured your Network/Internet access with\n" +"drakconnect before going any further." msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 -#, c-format -msgid "No CDROM support" +#: ../../network/drakfirewall.pm_.c:152 +msgid "Which services would you like to allow the Internet to connect to?" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Wireless connection" +#: ../../network/drakfirewall.pm_.c:153 +msgid "" +"You can enter miscellaneous ports. \n" +"Valid examples are: 139/tcp 139/udp.\n" +"Have a look at /etc/services for information." msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../network/drakfirewall.pm_.c:159 #, c-format -msgid "China (broadcast)" +msgid "" +"Invalid port given: %s.\n" +"The proper format is \"port/tcp\" or \"port/udp\", \n" +"where port is between 1 and 65535." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use quota for backup files." +#: ../../network/drakfirewall.pm_.c:167 +msgid "Everything (no firewall)" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring printer \"%s\"..." +#: ../../network/drakfirewall.pm_.c:169 +msgid "Other ports" msgstr "" -#: ../../fs.pm:1 -#, c-format +#: ../../network/ethernet.pm_.c:37 msgid "" -"Do not allow execution of any binaries on the mounted\n" -"file system. This option might be useful for a server that has file systems\n" -"containing binaries for architectures other than its own." +"Which dhcp client do you want to use?\n" +"Default is dhcp-client" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Enter a Zeroconf host name which will be the one that your machine will get back to other machines on the network:" +#: ../../network/ethernet.pm_.c:88 +msgid "" +"No ethernet network adapter has been detected on your system.\n" +"I cannot set up this connection type." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Internet connection" +#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234 +msgid "Choose the network interface" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format +#: ../../network/ethernet.pm_.c:93 msgid "" -"Loading module %s failed.\n" -"Do you want to try again with other parameters?" +"Please choose which network adapter you want to use to connect to Internet" msgstr "" -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "Welcome to the Open Source world." +#: ../../network/ethernet.pm_.c:176 +msgid "no network card found" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bosnia and Herzegovina" +#: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349 +msgid "Configuring network" msgstr "" -#: ../../fsedit.pm:1 -#, c-format +#: ../../network/ethernet.pm_.c:201 msgid "" -"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n" -"" +"Please enter your host name if you know it.\n" +"Some DHCP servers require the hostname to work.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''." msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"You must enter a host name or an IP address.\n" -"" +#: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354 +msgid "Host name" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Netherlands" +#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 +#: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103 +#: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171 +#: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245 +#: ../../network/netconnect.pm_.c:253 +msgid "Network Configuration Wizard" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Sending files by FTP" +#: ../../network/isdn.pm_.c:22 +msgid "External ISDN modem" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\"" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Title" +#: ../../network/isdn.pm_.c:22 +msgid "What kind is your ISDN connection?" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Install & convert Fonts" +#: ../../network/isdn.pm_.c:45 +msgid "" +"Which ISDN configuration do you prefer?\n" +"\n" +"* The Old configuration uses isdn4net. It contains powerful\n" +" tools, but is tricky to configure, and not standard.\n" +"\n" +"* The New configuration is easier to understand, more\n" +" standard, but with less tools.\n" +"\n" +"We recommand the light configuration.\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WARNING" +#: ../../network/isdn.pm_.c:54 +msgid "New configuration (isdn-light)" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing bootloader" +#: ../../network/isdn.pm_.c:54 +msgid "Old configuration (isdn4net)" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "The name of your ups" +#: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184 +#: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202 +#: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219 +msgid "ISDN Configuration" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "replay" +#: ../../network/isdn.pm_.c:166 +msgid "" +"Select your provider.\n" +"If it isn't listed, choose Unlisted." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention." +#: ../../network/isdn.pm_.c:179 +msgid "Europe protocol" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (U.S.)" +#: ../../network/isdn.pm_.c:179 +msgid "Europe protocol (EDSS1)" msgstr "" -#: ../../partition_table.pm:1 -#, c-format -msgid "Bad backup file" +#: ../../network/isdn.pm_.c:181 +msgid "Protocol for the rest of the world" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format +#: ../../network/isdn.pm_.c:181 msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently disabled.\n" -"\n" -"What would you like to do?" +"Protocol for the rest of the world\n" +"No D-Channel (leased lines)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter IP address and port of the host whose printers you want to use." +#: ../../network/isdn.pm_.c:185 +msgid "Which protocol do you want to use?" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../network/isdn.pm_.c:196 #, c-format -msgid "Pipe into command" +msgid "Found \"%s\" interface do you want to use it ?" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Some hardware on your computer needs ``proprietary'' drivers to work.\n" -"You can find some information about them at: %s" +#: ../../network/isdn.pm_.c:203 +msgid "What kind of card do you have?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Haiti" +#: ../../network/isdn.pm_.c:204 +msgid "I don't know" msgstr "" -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detecting devices..." +#: ../../network/isdn.pm_.c:204 +msgid "ISA / PCMCIA" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom allows you to specify your own day and time. The other options use run-parts in /etc/crontab." +#: ../../network/isdn.pm_.c:204 +msgid "PCI" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format +#: ../../network/isdn.pm_.c:210 msgid "" -"Description of the fields:\n" "\n" -"" -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "Basic options" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the name of the CPU" +"If you have an ISA card, the values on the next screen should be right.\n" +"\n" +"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " +"card.\n" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Accept bogus IPv4 error messages" +#: ../../network/isdn.pm_.c:214 +msgid "Abort" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Refreshing printer data..." +#: ../../network/isdn.pm_.c:214 +msgid "Continue" msgstr "" -#: ../../install2.pm:1 -#, c-format -msgid "You must also format %s" +#: ../../network/isdn.pm_.c:220 +msgid "Which is your ISDN card?" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Be careful: this operation is dangerous." +#: ../../network/isdn.pm_.c:239 +msgid "" +"I have detected an ISDN PCI card, but I don't know its type. Please select a " +"PCI card on the next screen." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Insert a floppy containing package selection" +#: ../../network/isdn.pm_.c:248 +msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" -#: ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server: " +#: ../../network/modem.pm_.c:57 +msgid "Please choose which serial port your modem is connected to." msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "Security Alerts:" +#: ../../network/modem.pm_.c:67 +msgid "Dialup options" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Sweden" +#: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619 +msgid "Connection name" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Expect for SSH" +#: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620 +msgid "Phone number" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Master" +#: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621 +msgid "Login ID" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Poland" +#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 +msgid "CHAP" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Other ports" +#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 +msgid "PAP" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "number of capture buffers for mmap'ed capture" +#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 +msgid "Script-based" msgstr "" -#: ../../network/adsl.pm:1 ../../network/adsl.pm:1 ../../network/adsl.pm:1 -#, c-format -msgid " - detected" +#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 +msgid "Terminal-based" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SMBus controllers" +#: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624 +msgid "Domain name" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection timeout (in sec)" +#: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625 +msgid "First DNS Server (optional)" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used" +#: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626 +msgid "Second DNS Server (optional)" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Croatian" +#: ../../network/modem.pm_.c:95 +msgid "" +"Your modem isn't supported by the system.\n" +"Take a look at http://www.linmodems.org" msgstr "" -#: ../../help.pm:1 +#: ../../network/modem.pm_.c:97 #, c-format -msgid "Use existing partition" +msgid "" +"\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Auto" +#: ../../network/modem.pm_.c:97 +msgid "Do nothing" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Unable to contact mirror %s" +#: ../../network/modem.pm_.c:97 +msgid "Install rpm" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "/Help/_About..." +#: ../../network/modem.pm_.c:97 +msgid "Title" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remove user directories before restore." +#: ../../network/netconnect.pm_.c:29 +msgid "" +"\n" +"You can disconnect or reconfigure your connection." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?" +#: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 +msgid "" +"\n" +"You can reconfigure your connection." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "CUPS printer configuration" +#: ../../network/netconnect.pm_.c:29 +msgid "You are currently connected to internet." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "could not find any font in your mounted partitions" +#: ../../network/netconnect.pm_.c:32 +msgid "" +"\n" +"You can connect to Internet or reconfigure your connection." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "F00f bug" +#: ../../network/netconnect.pm_.c:32 +msgid "You are not currently connected to Internet." msgstr "" -#: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s" +#: ../../network/netconnect.pm_.c:36 +msgid "Connect" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Domain Name:" +#: ../../network/netconnect.pm_.c:37 +msgid "Disconnect" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Root umask" +#: ../../network/netconnect.pm_.c:38 +msgid "Configure the connection" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "On Floppy" +#: ../../network/netconnect.pm_.c:41 +msgid "Internet connection & configuration" msgstr "" -#: ../../security/l10n.pm:1 +#: ../../network/netconnect.pm_.c:94 #, c-format -msgid "Reboot by the console user" +msgid "We are now going to configure the %s connection." msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 +#: ../../network/netconnect.pm_.c:103 #, c-format -msgid "Restore" +msgid "" +"\n" +"\n" +"\n" +"We are now going to configure the %s connection.\n" +"\n" +"\n" +"Press OK to continue." msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "Server:" +#: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272 +#: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77 +msgid "Network Configuration" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check if the network devices are in promiscuous mode." +#: ../../network/netconnect.pm_.c:133 +msgid "" +"Because you are doing a network installation, your network is already " +"configured.\n" +"Click on Ok to keep your configuration, or cancel to reconfigure your " +"Internet & Network connection.\n" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages..." +#: ../../network/netconnect.pm_.c:157 +msgid "" +"Welcome to The Network Configuration Wizard.\n" +"\n" +"We are about to configure your internet/network connection.\n" +"If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Please wait, setting up system configuration files on USB key..." +#: ../../network/netconnect.pm_.c:163 +msgid "Choose the profile to configure" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Init Message" +#: ../../network/netconnect.pm_.c:164 +msgid "Use auto detection" msgstr "" -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Rescue partition table" +#: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966 +#: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274 +#: ../../standalone/drakfloppy_.c:118 +msgid "Expert Mode" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cyprus" +#: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364 +msgid "Detecting devices..." msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Connection complete." +#: ../../network/netconnect.pm_.c:214 +msgid "Normal modem connection" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../network/netconnect.pm_.c:214 #, c-format -msgid "Remove from RAID" +msgid "detected on port %s" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "This encryption key is too simple (must be at least %d characters long)" +#: ../../network/netconnect.pm_.c:215 +msgid "Winmodem connection" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Configuration Wizards" +#: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217 +msgid "detected" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../network/netconnect.pm_.c:216 msgid "ISDN connection" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../network/netconnect.pm_.c:216 #, c-format -msgid "CD-R / DVD-R" +msgid "detected %s" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "primary" +#: ../../network/netconnect.pm_.c:217 +msgid "ADSL connection" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid " on SMB/Windows server \"%s\", share \"%s\"" +#: ../../network/netconnect.pm_.c:218 +msgid "Cable connection" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"This dialog is used to choose which services you wish to start at boot\n" -"time.\n" -"\n" -"DrakX will list all the services available on the current installation.\n" -"Review each one carefully and uncheck those which are not needed at boot\n" -"time.\n" -"\n" -"A short explanatory text will be displayed about a service when it is\n" -"selected. However, if you are not sure whether a service is useful or not,\n" -"it is safer to leave the default behavior.\n" -"\n" -"!! At this stage, be very careful if you intend to use your machine as a\n" -"server: you will probably not want to start any services that you do not\n" -"need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need.\n" -"!!" +#: ../../network/netconnect.pm_.c:218 +msgid "cable connection detected" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Netwok name (ESSID)" +#: ../../network/netconnect.pm_.c:219 +msgid "LAN connection" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Niue" +#: ../../network/netconnect.pm_.c:219 +msgid "ethernet card(s) detected" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Skip" +#: ../../network/netconnect.pm_.c:222 +msgid "Choose the connection you want to configure" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../network/netconnect.pm_.c:246 msgid "" -"Activates/Deactivates all network interfaces configured to start\n" -"at boot time." -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Action" +"You have configured multiple ways to connect to the Internet.\n" +"Choose the one you want to use.\n" +"\n" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)" +#: ../../network/netconnect.pm_.c:247 +msgid "Internet connection" msgstr "" -#: ../../pkgs.pm:1 -#, c-format -msgid "important" +#: ../../network/netconnect.pm_.c:253 +msgid "Do you want to start the connection at boot?" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Mandrake Linux Printer Management Tool" +#: ../../network/netconnect.pm_.c:267 +msgid "Network configuration" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Total Progress" +#: ../../network/netconnect.pm_.c:268 +msgid "The network needs to be restarted" msgstr "" -#: ../../help.pm:1 +#: ../../network/netconnect.pm_.c:272 #, c-format msgid "" -"DrakX will first detect any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" -"found, DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection is not foolproof, DrakX may fail in detecting\n" -"your hard drives. If so, you'll have to specify your hardware by hand.\n" -"\n" -"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" -"want to configure options for it. You should allow DrakX to probe the\n" -"hardware for the card-specific options which are needed to initialize the\n" -"adapter. Most of the time, DrakX will get through this step without any\n" -"issues.\n" +"A problem occured while restarting the network: \n" "\n" -"If DrakX is not able to probe for the options to automatically determine\n" -"which parameters need to be passed to the hardware, you'll need to manually\n" -"configure the driver." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Aruba" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Users" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Name:" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing bootloader..." -msgstr "" - -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Enter your user information, password will be used for screensaver" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Gateway (e.g. %s)" -msgstr "" - -#: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "The passwords do not match" +"%s" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format +#: ../../network/netconnect.pm_.c:282 msgid "" -"Examples for correct IPs:\n" -"" +"Congratulations, the network and Internet configuration is finished.\n" +"The configuration will now be applied to your system.\n" +"\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose the media for backup." +#: ../../network/netconnect.pm_.c:286 +msgid "" +"After this is done, we recommend that you restart your X environment to " +"avoid any hostname-related problems." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Frequency (MHz)" +#: ../../network/netconnect.pm_.c:287 +msgid "" +"Problems occured during configuration.\n" +"Test your connection via net_monitor or mcc. If your connection doesn't " +"work, you might want to relaunch the configuration." msgstr "" -#: ../../install_any.pm:1 -#, c-format -msgid "To use this saved packages selection, boot installation with ``linux defcfg=floppy''" +#: ../../network/network.pm_.c:278 +msgid "" +"WARNING: this device has been previously configured to connect to the " +"Internet.\n" +"Simply accept to keep this device configured.\n" +"Modifying the fields below will override this configuration." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the number of the processor" +#: ../../network/network.pm_.c:283 +msgid "" +"Please enter the IP configuration for this machine.\n" +"Each item should be entered as an IP address in dotted-decimal\n" +"notation (for example, 1.2.3.4)." msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294 #, c-format -msgid "Hardware clock set to GMT" +msgid "Configuring network device %s" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../network/network.pm_.c:294 #, c-format -msgid "Do you want to start a new configuration ?" +msgid " (driver %s)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Give a file name" +#: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228 +#: ../../standalone/drakconnect_.c:464 +msgid "IP address" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the port that your printer is connected to." +#: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465 +#: ../../standalone/drakgw_.c:291 +msgid "Netmask" msgstr "" -#: ../../standalone/livedrake:1 -#, c-format -msgid "Change Cd-Rom" +#: ../../network/network.pm_.c:298 +msgid "(bootp/dhcp)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Paraguay" +#: ../../network/network.pm_.c:298 +msgid "Automatic IP" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Configuration is complete, do you want to apply settings ?" +#: ../../network/network.pm_.c:299 +msgid "Start at boot" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Use Incremental/Differential Backups (do not replace old backups)" +#: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812 +msgid "IP address should be in format 1.2.3.4" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../network/network.pm_.c:326 msgid "" -" - Maintain /etc/dhcpd.conf:\n" -" \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n" -" \taddress and net boot images to the machine. drakTermServ helps create/remove \n" -" \tthese entries.\n" -"\t\t\t\n" -" \t(PCI cards may omit the image - etherboot will request the correct image. \n" -"\t\t\tYou should also consider that when etherboot looks for the images, it expects \n" -"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \tA typical dhcpd.conf stanza to support a diskless client looks like:" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "There's no known driver for your sound card (%s)" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "force" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Exit" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed." +"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " +"frequency), or add enough '0'." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Iwpriv command extra arguments" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format +#: ../../network/network.pm_.c:330 msgid "" -"You don't have any configured interface.\n" -"Configure them first by clicking on 'Configure'" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Estonian" +"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " +"enough '0'." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../network/network.pm_.c:350 msgid "" -"Enter your CD Writer device name\n" -" ex: 0,1,0" -msgstr "" - -#: ../../standalone/draksec:1 -#, c-format -msgid "ALL" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Clients" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "Choose the network interface" +"Please enter your host name.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''.\n" +"You may also enter the IP address of the gateway if you have one" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Select firmware file for the %s" +#: ../../network/network.pm_.c:355 +msgid "DNS server" msgstr "" -#: ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 +#: ../../network/network.pm_.c:356 #, c-format -msgid "Unknown Model" +msgid "Gateway (e.g. %s)" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "CD/DVD burners" +#: ../../network/network.pm_.c:358 +msgid "Gateway device" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"Partition booted by default\n" -" (for MS-DOS boot, not for lilo)\n" -"" +#: ../../network/network.pm_.c:363 +msgid "DNS server address should be in format 1.2.3.4" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Enable \"%s\" to read the file" +#: ../../network/network.pm_.c:367 +msgid "Gateway address should be in format 1.2.3.4" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "choose image" +#: ../../network/network.pm_.c:381 +msgid "Proxies configuration" msgstr "" -#: ../../network/shorewall.pm:1 -#, c-format -msgid "Firewalling configuration detected!" +#: ../../network/network.pm_.c:382 +msgid "HTTP proxy" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Connection name" +#: ../../network/network.pm_.c:383 +msgid "FTP proxy" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"x coordinate of text box\n" -"in number of characters" +#: ../../network/network.pm_.c:384 +msgid "Track network card id (useful for laptops)" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "You may not be able to install lilo (since lilo doesn't handle a LV on multiple PVs)" +#: ../../network/network.pm_.c:387 +msgid "Proxy should be http://..." msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Updating package selection" +#: ../../network/network.pm_.c:388 +msgid "Url should begin with 'ftp:' or 'http:'" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount the loopback file %s?" +#: ../../network/shorewall.pm_.c:26 +msgid "Firewalling configuration detected!" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format +#: ../../network/shorewall.pm_.c:27 msgid "" -"The floppy has been successfully generated.\n" -"You may now replay your installation." +"Warning! An existing firewalling configuration has been detected. You may " +"need some manual fix after installation." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use CD-R/DVD-R to backup" +#: ../../network/tools.pm_.c:57 +msgid "Internet configuration" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the number of buttons the mouse has" -msgstr "" - -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Replay" +#: ../../network/tools.pm_.c:58 +msgid "Do you want to try to connect to the Internet now?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup other files" +#: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193 +msgid "Testing your connection..." msgstr "" -#: ../../install_steps.pm:1 -#, c-format -msgid "No floppy drive available" +#: ../../network/tools.pm_.c:70 +msgid "The system is now connected to Internet." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files are corrupted" +#: ../../network/tools.pm_.c:71 +msgid "For security reason, it will be disconnected now." msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "TV norm:" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Cpuid family" +#: ../../network/tools.pm_.c:72 +msgid "" +"The system doesn't seem to be connected to internet.\n" +"Try to reconfigure your connection." msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "32 MB" +#: ../../network/tools.pm_.c:96 +msgid "Connection Configuration" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "type: thin" +#: ../../network/tools.pm_.c:97 +msgid "Please fill or check the field below" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (new)" +#: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605 +msgid "Card IRQ" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "yes means the arithmetic coprocessor has an exception vector attached" +#: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606 +msgid "Card mem (DMA)" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"You've selected a software RAID partition as root (/).\n" -"No bootloader is able to handle this without a /boot partition.\n" -"Please be sure to add a /boot partition" +#: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607 +msgid "Card IO" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Other OS (MacOS...)" +#: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608 +msgid "Card IO_0" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "To activate the mouse," +#: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609 +msgid "Card IO_1" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Alert configuration" +#: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610 +msgid "Your personal phone number" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing up the network" +#: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611 +msgid "Provider name (ex provider.net)" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "Screenshots will be available after install in %s" +#: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612 +msgid "Provider phone number" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"More than one Microsoft partition has been detected on your hard drive.\n" -"Please choose which one you want to resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." +#: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613 +msgid "Provider dns 1 (optional)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Tanzania" +#: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614 +msgid "Provider dns 2 (optional)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Computing FAT filesystem bounds" +#: ../../network/tools.pm_.c:109 +msgid "Choose your country" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"Backup Sources: \n" -"" +#: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617 +msgid "Dialing mode" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "custom" +#: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629 +msgid "Connection speed" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Content of the file" +#: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630 +msgid "Connection timeout (in sec)" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Authentication LDAP" +#: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615 +msgid "Account Login (user name)" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "in order to keep %s" +#: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616 +#: ../../standalone/drakconnect_.c:647 +msgid "Account Password" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Let me pick any driver" +#: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132 +msgid "United Kingdom" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "transmitted" +#: ../../partition_table.pm_.c:603 +msgid "mount failed: " msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Palestine" +#: ../../partition_table.pm_.c:667 +msgid "Extended partition not supported on this platform" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../partition_table.pm_.c:685 msgid "" -"RAID md%s\n" -"" -msgstr "" - -#: ../../modules/parameters.pm:1 -#, c-format -msgid "%d comma separated strings" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Here is the full list of keyboards available" +"You have a hole in your partition table but I can't use it.\n" +"The only solution is to move your primary partitions to have the hole next " +"to the extended partitions." msgstr "" -#: ../../standalone/draksplash:1 +#: ../../partition_table.pm_.c:774 #, c-format -msgid "Theme name" +msgid "Restoring from file %s failed: %s" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Help" +#: ../../partition_table.pm_.c:776 +msgid "Bad backup file" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../partition_table.pm_.c:796 #, c-format -msgid "Choosing an arbitrary driver" +msgid "Error writing to file %s" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format +#: ../../partition_table/raw.pm_.c:192 msgid "" -"Your USB key doesn't have any valid Windows (FAT) partitions.\n" -"We need one to continue (beside, it's more standard so that you\n" -"will be able to move and access your files from machines\n" -"running Windows). Please plug in an USB key containing a\n" -"Windows partition instead.\n" -"\n" -"\n" -"You may also proceed without an USB key - you'll still be\n" -"able to use Mandrake Move as a normal live Mandrake\n" -"Operating System." +"Something bad is happening on your drive. \n" +"A test to check the integrity of data has failed. \n" +"It means writing anything on the disk will end up with random trash" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cook Islands" +#: ../../pkgs.pm_.c:26 +msgid "must have" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines." +#: ../../pkgs.pm_.c:27 +msgid "important" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "the width of the progress bar" +#: ../../pkgs.pm_.c:28 +msgid "very nice" msgstr "" -#: ../../fs.pm:1 ../../fs.pm:1 -#, c-format -msgid "Formatting partition %s" +#: ../../pkgs.pm_.c:29 +msgid "nice" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hostname required" +#: ../../pkgs.pm_.c:30 +msgid "maybe" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselect fonts installed" +#: ../../printer/data.pm_.c:18 +msgid "PDQ - Print, Don't Queue" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" +#: ../../printer/data.pm_.c:19 +msgid "PDQ" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Submit kernel version" +#: ../../printer/data.pm_.c:30 +msgid "LPD - Line Printer Daemon" msgstr "" -#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakclock:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/logdrake:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Cancel" +#: ../../printer/data.pm_.c:31 +msgid "LPD" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for configured scanners ..." +#: ../../printer/data.pm_.c:51 +msgid "LPRng - LPR New Generation" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Videocard" +#: ../../printer/data.pm_.c:52 +msgid "LPRng" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\tBackups use tar and bzip2\n" -"" +#: ../../printer/data.pm_.c:75 +msgid "CUPS - Common Unix Printing System" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Remove Selected" +#: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677 +msgid "CUPS" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _modems" +#: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213 +#: ../../printer/detect.pm_.c:250 +msgid "Unknown Model" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remove printer" +#: ../../printer/main.pm_.c:26 +msgid "Local printer" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "View Last Log" +#: ../../printer/main.pm_.c:27 +msgid "Remote printer" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Which services would you like to allow the Internet to connect to?" +#: ../../printer/main.pm_.c:28 +msgid "Printer on remote CUPS server" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Connection Type" +#: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835 +msgid "Printer on remote lpd server" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "" -"Welcome to the mail configuration utility.\n" -"\n" -"Here, you'll be able to set up the alert system.\n" -"" +#: ../../printer/main.pm_.c:30 +msgid "Network printer (TCP/Socket)" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakperm:1 -#, c-format -msgid "Other" +#: ../../printer/main.pm_.c:31 +msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 -#, c-format -msgid "Default" +#: ../../printer/main.pm_.c:32 +msgid "Printer on NetWare server" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Button 2 Emulation" +#: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839 +msgid "Enter a printer device URI" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Please enter a package name." +#: ../../printer/main.pm_.c:34 +msgid "Pipe job into a command" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run chkrootkit checks" +#: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478 +#: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228 +msgid "Unknown model" msgstr "" -#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 -#, c-format -msgid "type1inst building" +#: ../../printer/main.pm_.c:317 +msgid "Local Printers" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Abiword" +#: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678 +msgid "Remote Printers" msgstr "" -#: ../../standalone/draksplash:1 ../../standalone/draksplash:1 +#: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381 #, c-format -msgid "choose image file" +msgid " on parallel port \\/*%s" msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383 #, c-format -msgid "X server" +msgid ", USB printer \\/*%s" msgstr "" -#: ../../any.pm:1 +#: ../../printer/main.pm_.c:334 #, c-format -msgid "Domain Admin User Name" +msgid ", multi-function device on parallel port \\/*%s" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "There was an error while scanning for TV channels" +#: ../../printer/main.pm_.c:337 +msgid ", multi-function device on USB" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "US keyboard (international)" +#: ../../printer/main.pm_.c:339 +msgid ", multi-function device on HP JetDirect" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Not installed" +#: ../../printer/main.pm_.c:341 +msgid ", multi-function device" msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/main.pm_.c:344 #, c-format -msgid "Both Alt keys simultaneously" +msgid ", printing to %s" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../printer/main.pm_.c:346 #, c-format -msgid "LAN connection" +msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" -#: ../../standalone/logdrake:1 +#: ../../printer/main.pm_.c:348 #, c-format -msgid "/File/-" +msgid ", TCP/IP host \"%s\", port %s" msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/main.pm_.c:352 #, c-format -msgid "Italian" +msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" -#: ../../interactive.pm:1 +#: ../../printer/main.pm_.c:356 #, c-format -msgid "Basic" +msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" -#: ../../install_messages.pm:1 +#: ../../printer/main.pm_.c:358 #, c-format -msgid "http://www.mandrakelinux.com/en/92errata.php3" +msgid ", using command %s" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Honduras" +#: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603 +msgid "Raw printer (No driver)" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 +#: ../../printer/main.pm_.c:647 #, c-format -msgid "pdq" +msgid "(on %s)" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO" +#: ../../printer/main.pm_.c:649 +msgid "(on this machine)" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../printer/main.pm_.c:674 #, c-format -msgid "Samba server" +msgid "On CUPS server \"%s\"" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"\n" -"This special Bootstrap\n" -"partition is for\n" -"dual-booting your system.\n" -"" +#: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888 +#: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120 +#: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197 +#: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354 +msgid " (Default)" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Please choose for each step whether it will replay like your install, or it will be manual" +#: ../../printer/printerdrake.pm_.c:27 +msgid "Select Printer Connection" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "You can also decide here whether scanners on remote machines should be made available on this machine." +#: ../../printer/printerdrake.pm_.c:28 +msgid "How is the printer connected?" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:30 msgid "" -"\t-Network by FTP.\n" -"" +"\n" +"Printers on remote CUPS servers you do not have to configure here; these " +"printers will be automatically detected." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Reports check result to tty" +#: ../../printer/printerdrake.pm_.c:38 +msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You must enter a device or file name!" +#: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950 +msgid "CUPS configuration" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Quit" +#: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951 +msgid "Specify CUPS server" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:83 msgid "" -"Graphics memory: %s kB\n" -"" +"To get access to printers on remote CUPS servers in your local network you " +"do not have to configure anything; the CUPS servers inform your machine " +"automatically about their printers. All printers currently known to your " +"machine are listed in the \"Remote printers\" section in the main window of " +"Printerdrake. When your CUPS server is not in your local network, you have " +"to enter the CUPS server IP address and optionally the port number to get " +"the printer information from the server, otherwise leave these fields blank." msgstr "" -#: ../../standalone.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:84 msgid "" -"This program is free software; you can redistribute it and/or modify\n" -"it under the terms of the GNU General Public License as published by\n" -"the Free Software Foundation; either version 2, or (at your option)\n" -"any later version.\n" "\n" -"This program is distributed in the hope that it will be useful,\n" -"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -"GNU General Public License for more details.\n" -"\n" -"You should have received a copy of the GNU General Public License\n" -"along with this program; if not, write to the Free Software\n" -"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "access to compilation tools" -msgstr "" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Global statistics" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select data to restore..." -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "" -"If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)\n" -"at the beginning of the disk" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Standard test page" -msgstr "" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "Time Zone" +"Normally, CUPS is automatically configured according to your network " +"environment, so that you can access the printers on the CUPS servers in your " +"local network. If this does not work correctly, turn off \"Automatic CUPS " +"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " +"forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Create" +#: ../../printer/printerdrake.pm_.c:88 +msgid "The IP address should look like 192.168.1.20" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "What" +#: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041 +msgid "The port number should be an integer!" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "There was an error ordering packages:" +#: ../../printer/printerdrake.pm_.c:99 +msgid "CUPS server IP" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Bulgarian (BDS)" +#: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061 +#: ../../standalone/harddrake2_.c:63 +msgid "Port" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Server" +#: ../../printer/printerdrake.pm_.c:102 +msgid "Automatic CUPS configuration" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem encryption key" +#: ../../printer/printerdrake.pm_.c:159 +msgid "Checking your system..." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Gujarati" +#: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226 +#: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481 +#: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133 +#: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343 +#: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436 +#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630 +#: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701 +#: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731 +#: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809 +#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911 +#: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281 +#: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369 +#: ../../standalone/printerdrake_.c:47 +msgid "Printerdrake" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:167 msgid "" -" While you can use a pool of IP addresses, rather than setup a specific entry for\n" -" a client machine, using a fixed address scheme facilitates using the functionality\n" -" of client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -" Note: The '#type' entry is only used by drakTermServ. Clients can either be 'thin'\n" -" or 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run \n" -" most software on the client machine. A special inittab, %s is\n" -" written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n" -" modified if thin clients are used, to enable xdmcp. Since there are security issues in \n" -" using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local\n" -" subnet.\n" -"\t\t\t\n" -" Note: The '#hdw_config' entry is also only used by drakTermServ. Clients can either \n" -" be 'true' or 'false'. 'true' enables root login at the client machine and allows local \n" -" hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n" -" by creating separate config files associated with the client's IP address and creating \n" -" read/write mount points to allow the client to alter the file. Once you are satisfied \n" -" with the configuration, you can remove root login privileges from the client.\n" -"\t\t\t\n" -" Note: You must stop/start the server after adding or changing clients." +"There are no printers found which are directly connected to your machine" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:179 msgid "" -"Please choose the first number of the 10-range you wish to edit,\n" -"or just hit Enter to proceed.\n" -"Your choice? " +"The following printers\n" +"\n" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:180 msgid "" +"The following printer\n" "\n" -" Copyright (C) 2002 by MandrakeSoft \n" -"\tStew Benedict sbenedict@mandrakesoft.com\n" -"\n" -"" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "Save theme" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Brazil" -msgstr "" - -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install" +#: ../../printer/printerdrake.pm_.c:182 +msgid "" +"\n" +"and one unknown printer are " msgstr "" -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm_.c:184 #, c-format -msgid "Network Configuration Wizard" +msgid "" +"\n" +"and %d unknown printers are " msgstr "" -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Removable media automounting" +#: ../../printer/printerdrake.pm_.c:187 +msgid "" +"\n" +"are " msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Printing" +#: ../../printer/printerdrake.pm_.c:187 +msgid "" +"\n" +"is " msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Enter the directory to save:" +#: ../../printer/printerdrake.pm_.c:189 +msgid "directly connected to your system" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "There are no printers found which are directly connected to your machine" +#: ../../printer/printerdrake.pm_.c:192 +msgid "" +"\n" +"There is one unknown printer directly connected to your system" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm_.c:194 #, c-format -msgid "Create a new partition" +msgid "" +"\n" +"There are %d unknown printers directly connected to your system" msgstr "" -#: ../../harddrake/sound.pm:1 ../../harddrake/sound.pm:1 ../../standalone/drakups:1 -#, c-format -msgid "Driver:" +#: ../../printer/printerdrake.pm_.c:200 +msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "unknown" +#: ../../printer/printerdrake.pm_.c:214 +msgid "" +"Do you want to enable printing on the printers mentioned above or on " +"printers in the local network?\n" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use fdisk" +#: ../../printer/printerdrake.pm_.c:215 +msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Services settings" +#: ../../printer/printerdrake.pm_.c:217 +msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "MOVE YOUR WHEEL!" +#: ../../printer/printerdrake.pm_.c:218 +msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" -#: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 +#: ../../printer/printerdrake.pm_.c:219 #, c-format -msgid "sent: " +msgid "" +"NOTE: Depending on the printer model and the printing system up to %d MB of " +"additional software will be installed." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Automatic IP" +#: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270 +#: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933 +#: ../../printer/printerdrake.pm_.c:3060 +msgid "Add a new printer" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:259 msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"%s\" to reboot the system. The first thing you\n" -"should see after your computer has finished doing its hardware tests is the\n" -"bootloader menu, giving you the choice of which operating system to start.\n" "\n" -"The \"%s\" button shows two more buttons to:\n" +"Welcome to the Printer Setup Wizard\n" "\n" -" * \"%s\": to create an installation floppy disk that will automatically\n" -"perform a whole installation without the help of an operator, similar to\n" -"the installation you just configured.\n" +"This wizard allows you to install local or remote printers to be used from " +"this machine and also from other machines in the network.\n" "\n" -" Note that two different options are available after clicking the button:\n" +"It asks you for all necessary information to set up the printer and gives " +"you access to all available printer drivers, driver options, and printer " +"connection types." +msgstr "" + +#: ../../printer/printerdrake.pm_.c:272 +msgid "" "\n" -" * \"%s\". This is a partially automated installation. The partitioning\n" -"step is the only interactive procedure.\n" +"Welcome to the Printer Setup Wizard\n" "\n" -" * \"%s\". Fully automated installation: the hard disk is completely\n" -"rewritten, all data is lost.\n" +"This wizard will help you to install your printer(s) connected to this " +"computer, connected directly to the network or to a remote Windows machine.\n" "\n" -" This feature is very handy when installing a number of similar machines.\n" -"See the Auto install section on our web site for more information.\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) and you Windows machines must be connected and " +"turned on.\n" "\n" -" * \"%s\"(*): saves a list of the packages selected in this installation.\n" -"To use this selection with another installation, insert the floppy and\n" -"start the installation. At the prompt, press the [F1] key and type >>linux\n" -"defcfg=\"floppy\" <<.\n" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network and/or Windows-hosted printers when you don't need " +"it.\n" "\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Moldova" -msgstr "" - -#: ../../mouse.pm:1 ../../mouse.pm:1 -#, c-format -msgid "Kensington Thinking Mouse" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuration of a remote printer" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Welcome to the UPS configuration tools" -msgstr "" - -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "An online platform to respond to enterprise support needs." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "URL should begin with 'ftp:' or 'http:'" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Oriya" +" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " +"want to set up your printer(s) now." msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Add a new rule at the end" -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "LiLo and Bootsplash themes installation successful" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine." -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298 msgid "" -"You may now provide options to module %s.\n" -"Options are in format ``name=value name2=value2 ...''.\n" -"For instance, ``io=0x300 irq=7''" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Quit without writing the partition table?" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetScroll" -msgstr "" - -#: ../../standalone.pm:1 -#, c-format -msgid "Installing packages..." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "On Hard Drive" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Access Control Lists" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dutch" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Angola" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"The following packages need to be installed:\n" -"" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "The driver that manage your ups" -msgstr "" - -#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Custom" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Latvia" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "File is already used by another loopback, choose another one" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read-only" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "" -"Enable/Disable name resolution spoofing protection. If\n" -"\"alert\" is true, also reports to syslog." -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No known driver" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "1 MB" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "If it is not the one you want to configure, enter a device name/file name in the input line" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " +"want to set up your printer(s) now." msgstr "" -#: ../../standalone/draksound:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:289 msgid "" -"No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n" "\n" +"Welcome to the Printer Setup Wizard\n" "\n" -"You can visit our hardware database at:\n" +"This wizard will help you to install your printer(s) connected to this " +"computer or connected directly to the network.\n" "\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) must be connected and turned on.\n" "\n" -"http://www.linux-mandrake.com/en/hardware.php3" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network printers when you don't need it.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " +"want to set up your printer(s) now." msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Configure Local Area Network..." +#: ../../printer/printerdrake.pm_.c:307 +msgid "Auto-detect printers connected to this machine" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "" -"The USB key seems to have write protection enabled. Please\n" -"unplug it, remove write protection, and then plug it again." +#: ../../printer/printerdrake.pm_.c:310 +msgid "Auto-detect printers connected directly to the local network" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Launch the sound system on your machine" +#: ../../printer/printerdrake.pm_.c:313 +msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Verify checksum of the suid/sgid files" +#: ../../printer/printerdrake.pm_.c:329 +msgid "" +"\n" +"Congratulations, your printer is now installed and configured!\n" +"\n" +"You can print using the \"Print\" command of your application (usually in " +"the \"File\" menu).\n" +"\n" +"If you want to add, remove, or rename a printer, or if you want to change " +"the default option settings (paper input tray, printout quality, ...), " +"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " +"Center." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Run some checks against the rpm database" +#: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538 +#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 +msgid "Printer auto-detection" msgstr "" -#: ../../standalone/drakperm:1 +#: ../../printer/printerdrake.pm_.c:385 #, c-format -msgid "Execute" +msgid ", network printer \"%s\", port %s" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:387 #, c-format -msgid "Preparing printer database..." +msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm_.c:391 #, c-format -msgid "Information" +msgid "Detected %s" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423 +#: ../../printer/printerdrake.pm_.c:440 #, c-format -msgid "No network card" +msgid "Printer on parallel port \\/*%s" msgstr "" -#: ../../mouse.pm:1 +#: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425 +#: ../../printer/printerdrake.pm_.c:443 #, c-format -msgid "3 buttons" +msgid "USB printer \\/*%s" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 +#: ../../printer/printerdrake.pm_.c:399 #, c-format -msgid "Which filesystem do you want?" +msgid "Network printer \"%s\", port %s" msgstr "" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm_.c:401 #, c-format -msgid "Malta" +msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Detailed information" +#: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547 +msgid "Local Printer" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:526 msgid "" -"Printer default settings\n" -"\n" -"You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower." -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "This floppy is not FAT formatted" +"No local printer found! To manually install a printer enter a device name/" +"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " +"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " +"printer: /dev/usb/lp1, ...)." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This option will save files that have changed. Exact behavior depends on whether incremental or differential mode is used." -msgstr "" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Graphic Card" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Resizing Windows partition" +#: ../../printer/printerdrake.pm_.c:530 +msgid "You must enter a device or file name!" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cameroon" +#: ../../printer/printerdrake.pm_.c:539 +msgid "No printer found!" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 1 (optional)" +#: ../../printer/printerdrake.pm_.c:548 +msgid "Available printers" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:552 msgid "" -"You can now partition %s.\n" -"When you are done, don't forget to save using `w'" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Saami (swedish/finnish)" +"The following printer was auto-detected, if it is not the one you want to " +"configure, enter a device name/file name in the input line" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 ../../standalone/drakbug:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/net_monitor:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Close" -msgstr "" - -#: ../../help.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:553 msgid "" -"\"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list." -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Calendar" +"Here is a list of all auto-detected printers. Please choose the printer you " +"want to set up or enter a device name/file name in the input line" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:555 msgid "" -"Restore Selected\n" -"Catalog Entry" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Iceland" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Network & Internet Configuration" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "consolehelper missing" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "stopped" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Whether the FPU has an irq vector" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Ext2" +"The following printer was auto-detected. The configuration of the printer " +"will work fully automatically. If your printer was not correctly detected or " +"if you prefer a customized printer configuration, turn on \"Manual " +"configuration\"." msgstr "" -#: ../../ugtk2.pm:1 -#, c-format -msgid "Expand Tree" -msgstr "" - -#: ../../harddrake/sound.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:556 msgid "" -"The old \"%s\" driver is blacklisted.\n" -"\n" -"It has been reported to oops the kernel on unloading.\n" -"\n" -"The new \"%s\" driver'll only be used on next bootstrap." +"Here is a list of all auto-detected printers. Please choose the printer you " +"want to set up. The configuration of the printer will work fully " +"automatically. If your printer was not correctly detected or if you prefer a " +"customized printer configuration, turn on \"Manual configuration\"." msgstr "" -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Expert Mode" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer options" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Local Network adress" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup your System files. (/etc directory)" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Set the user umask." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:558 msgid "" -"You now have the opportunity to download updated packages. These packages\n" -"have been updated after the distribution was released. They may\n" -"contain security or bug fixes.\n" -"\n" -"To download these packages, you will need to have a working Internet \n" -"connection.\n" -"\n" -"Do you want to install the updates ?" +"Please choose the port where your printer is connected to or enter a device " +"name/file name in the input line" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Samba Server" +#: ../../printer/printerdrake.pm_.c:559 +msgid "Please choose the port where your printer is connected to." msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Australian Optus cable TV" -msgstr "" - -#: ../../install_steps_newt.pm:1 -#, c-format -msgid " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet:" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Zimbabwe" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "When" -msgstr "" - -#: ../../network/adsl.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:561 msgid "" -"You need the Alcatel microcode.\n" -"Download it at:\n" -"%s\n" -"and copy the mgmt.o in /usr/share/speedtouch" +" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " +"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Hour" +#: ../../printer/printerdrake.pm_.c:565 +msgid "You must choose/enter a printer/device!" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Second DNS Server (optional)" +#: ../../printer/printerdrake.pm_.c:584 +msgid "Manual configuration" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Finland" +#: ../../printer/printerdrake.pm_.c:633 +msgid "Remote lpd Printer Options" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:634 msgid "" -"Color depth: %s\n" -"" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It must be upgraded" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Loading from floppy" +"To use a remote lpd printer, you need to supply the hostname of the printer " +"server and the printer name on that server." msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "Timezone - DrakClock" +#: ../../printer/printerdrake.pm_.c:635 +msgid "Remote host name" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "DrakUPS" +#: ../../printer/printerdrake.pm_.c:636 +msgid "Remote printer name" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable the logging of IPv4 strange packets." +#: ../../printer/printerdrake.pm_.c:639 +msgid "Remote host name missing!" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Slovenia" +#: ../../printer/printerdrake.pm_.c:643 +msgid "Remote printer name missing!" msgstr "" -#: ../../standalone/mousedrake:1 +#: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170 #, c-format -msgid "Mouse test" +msgid "Detected model: %s %s" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "" -"Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.\n" -"You can also edit your own rules which will owerwrite the default rules." +#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 +msgid "Scanning network..." msgstr "" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772 #, c-format -msgid "" -"Enter a user\n" -"%s" +msgid ", printer \"%s\" on server \"%s\"" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775 #, c-format -msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids" +msgid "Printer \"%s\" on server \"%s\"" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "ProgressBar color selection" +#: ../../printer/printerdrake.pm_.c:795 +msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" -#: ../../any.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:796 msgid "" -"Here are the entries on your boot menu so far.\n" -"You can create additional entries or change the existing ones." +"To print to a SMB printer, you need to provide the SMB host name (Note! It " +"may be different from its TCP/IP hostname!) and possibly the IP address of " +"the print server, as well as the share name for the printer you wish to " +"access and any applicable user name, password, and workgroup information." msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "/dev/hda" -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "/dev/hdb" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Iwspy command extra arguments" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:797 msgid "" -"Application Name\n" -"or Full Path:" +" If the desired printer was auto-detected, simply choose it from the list " +"and then add user name, password, and/or workgroup if needed." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"Runs commands scheduled by the at command at the time specified when\n" -"at was run, and runs batch commands when the load average is low enough." +#: ../../printer/printerdrake.pm_.c:799 +msgid "SMB server host" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Radio support:" +#: ../../printer/printerdrake.pm_.c:800 +msgid "SMB server IP" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing SANE packages..." +#: ../../printer/printerdrake.pm_.c:801 +msgid "Share name" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "LDAP" +#: ../../printer/printerdrake.pm_.c:804 +msgid "Workgroup" msgstr "" -#: ../../bootloader.pm:1 -#, c-format -msgid "SILO" +#: ../../printer/printerdrake.pm_.c:806 +msgid "Auto-detected" msgstr "" -#: ../../diskdrake/removable.pm:1 -#, c-format -msgid "Change type" +#: ../../printer/printerdrake.pm_.c:816 +msgid "Either the server name or the server's IP must be given!" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", USB printer #%s" +#: ../../printer/printerdrake.pm_.c:820 +msgid "Samba share name missing!" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "SILO Installation" +#: ../../printer/printerdrake.pm_.c:826 +msgid "SECURITY WARNING!" msgstr "" -#: ../../install_messages.pm:1 +#: ../../printer/printerdrake.pm_.c:827 #, c-format msgid "" -"Congratulations, installation is complete.\n" -"Remove the boot media and press return to reboot.\n" +"You are about to set up printing to a Windows account with password. Due to " +"a fault in the architecture of the Samba client software the password is put " +"in clear text into the command line of the Samba client used to transmit the " +"print job to the Windows server. So it is possible for every user on this " +"machine to display the password on the screen by issuing commands as \"ps " +"auxwww\".\n" "\n" +"We recommend to make use of one of the following alternatives (in all cases " +"you have to make sure that only machines from your local network have access " +"to your Windows server, for example by means of a firewall):\n" "\n" -"For information on fixes which are available for this release of Mandrake Linux,\n" -"consult the Errata available from:\n" +"Use a password-less account on your Windows server, as the \"GUEST\" account " +"or a special account dedicated for printing. Do not remove the password " +"protection from a personal account or the administrator account.\n" "\n" +"Set up your Windows server to make the printer available under the LPD " +"protocol. Then set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" "\n" -"%s\n" -"\n" -"\n" -"Information on configuring your system is available in the post\n" -"install chapter of the Official Mandrake Linux User's Guide." -msgstr "" - -#: ../../standalone/drakclock:1 -#, c-format -msgid "Enable Network Time Protocol" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "paranoid" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Do not send mails when unneeded" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Your scanner(s) will not be available on the network." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Send mail report after each backup to:" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:837 #, c-format msgid "" -"This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n" -"" -msgstr "" - -#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolution" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information." +"Set up your Windows server to make the printer available under the IPP " +"protocol and set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" +"\n" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid " Enabling su only from members of the wheel group or allow su from any user." +#: ../../printer/printerdrake.pm_.c:840 +msgid "" +"Connect your printer to a Linux server and let your Windows machine(s) " +"connect to it as a client.\n" +"\n" +"Do you really want to continue setting up this printer as you are doing now?" msgstr "" -#: ../../standalone/drakgw:1 ../../standalone/drakgw:1 -#, c-format -msgid "reconfigure" +#: ../../printer/printerdrake.pm_.c:911 +msgid "NetWare Printer Options" msgstr "" -#: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:912 msgid "" -"Your card can have 3D hardware acceleration support with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." +"To print on a NetWare printer, you need to provide the NetWare print server " +"name (Note! it may be different from its TCP/IP hostname!) as well as the " +"print queue name for the printer you wish to access and any applicable user " +"name and password." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Shell timeout" +#: ../../printer/printerdrake.pm_.c:913 +msgid "Printer Server" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Xinetd Service" +#: ../../printer/printerdrake.pm_.c:914 +msgid "Print Queue Name" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "access to network tools" +#: ../../printer/printerdrake.pm_.c:919 +msgid "NCP server name missing!" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Firmware-Upload for HP LaserJet 1000" +#: ../../printer/printerdrake.pm_.c:923 +msgid "NCP queue name missing!" msgstr "" -#: ../advertising/03-software.pl:1 +#: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007 #, c-format -msgid "And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos." +msgid ", host \"%s\", port %s" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010 #, c-format -msgid "Here is a list of all auto-detected printers. " +msgid "Host \"%s\", port %s" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Error installing aboot, \n" -"try to force installation even if that destroys the first partition?" +#: ../../printer/printerdrake.pm_.c:1030 +msgid "TCP/Socket Printer Options" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1032 msgid "" -"Restore Selected\n" -"Files" +"Choose one of the auto-detected printers from the list or enter the hostname " +"or IP and the optional port number (default is 9100) into the input fields." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1033 msgid "" -"%s exists, delete?\n" -"\n" -"Warning: If you've already done this process you'll probably\n" -" need to purge the entry from authorized_keys on the server." +"To print to a TCP or socket printer, you need to provide the host name or IP " +"of the printer and optionally the port number (default is 9100). On HP " +"JetDirect servers the port number is usually 9100, on other servers it can " +"vary. See the manual of your hardware." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Please fill or check the field below" +#: ../../printer/printerdrake.pm_.c:1037 +msgid "Printer host name or IP missing!" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Do you want to save /etc/fstab modifications" +#: ../../printer/printerdrake.pm_.c:1059 +msgid "Printer host name or IP" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Boot Protocol" +#: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109 +msgid "Printer Device URI" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1108 msgid "" -"LVM-disks %s\n" -"" -msgstr "" - -#: ../../services.pm:1 -#, c-format -msgid "On boot" +"You can specify directly the URI to access the printer. The URI must fulfill " +"either the CUPS or the Foomatic specifications. Note that not all URI types " +"are supported by all the spoolers." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The package %s is needed. Install it?" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus identification" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Vatican" +#: ../../printer/printerdrake.pm_.c:1123 +msgid "A valid URI must be entered!" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Please make a backup of your data first" +#: ../../printer/printerdrake.pm_.c:1463 +msgid "" +"Every printer needs a name (for example \"printer\"). The Description and " +"Location fields do not need to be filled in. They are comments for the users." msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "ADSL adapters" +#: ../../printer/printerdrake.pm_.c:1464 +msgid "Name of printer" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "You have more than one hard drive, which one do you install linux on?" +#: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38 +msgid "Description" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Eritrea" +#: ../../printer/printerdrake.pm_.c:1466 +msgid "Location" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot ISO" +#: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599 +msgid "Reading printer database..." msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "Firmware needed" +#: ../../printer/printerdrake.pm_.c:1482 +msgid "Preparing printer database..." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove List" +#: ../../printer/printerdrake.pm_.c:1578 +msgid "Your printer model" msgstr "" -#: ../advertising/05-desktop.pl:1 +#: ../../printer/printerdrake.pm_.c:1579 #, c-format -msgid "A customizable environment" +msgid "" +"Printerdrake has compared the model name resulting from the printer auto-" +"detection with the models listed in its printer database to find the best " +"match. This choice can be wrong, especially when your printer is not listed " +"at all in the database. So check whether the choice is correct and click " +"\"The model is correct\" if so and if not, click \"Select model manually\" " +"so that you can choose your printer model manually on the next screen.\n" +"\n" +"For your printer Printerdrake has found:\n" +"\n" +"%s" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Inuktitut" +#: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587 +msgid "The model is correct" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Some protocols, like rsync, may be configured at the server end. Rather than using a directory path, you would use the 'module' name for the service path." +#: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586 +#: ../../printer/printerdrake.pm_.c:1589 +msgid "Select model manually" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Morocco" +#: ../../printer/printerdrake.pm_.c:1606 +msgid "Printer model selection" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1607 msgid "Which printer model do you have?" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add a new printer" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " All of your selected data have been " -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Nepal" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Delete" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, c-format -msgid "cpu # " -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "chunk size" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1608 msgid "" -"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" -"If set to NONE, no issues are allowed.\n" "\n" -"Else only /etc/issue is allowed." -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid " Enable/Disable sulogin(8) in single user level." -msgstr "" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "commands before booting, or 'c' for a command-line." -msgstr "" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "Problems installing package %s" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "You will receive an alert if the load is higher than this value" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Add a scanner manually" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Refresh" -msgstr "" - -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Reload partition table" +"Please check whether Printerdrake did the auto-detection of your printer " +"model correctly. Search the correct model in the list when the cursor is " +"standing on a wrong model or on \"Raw printer\"." msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yes, I want autologin with this (user, desktop)" +#: ../../printer/printerdrake.pm_.c:1611 +msgid "" +"If your printer is not listed, choose a compatible (see printer manual) or a " +"similar one." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Selected" +#: ../../printer/printerdrake.pm_.c:1697 +msgid "OKI winprinter configuration" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search for fonts in installed list" +#: ../../printer/printerdrake.pm_.c:1698 +msgid "" +"You are configuring an OKI laser winprinter. These printers\n" +"use a very special communication protocol and therefore they work only when " +"connected to the first parallel port. When your printer is connected to " +"another port or to a print server box please connect the printer to the " +"first parallel port before you print a test page. Otherwise the printer will " +"not work. Your connection type setting will be ignored by the driver." msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "The Local Network did not finish with `.0', bailing out." +#: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745 +msgid "Lexmark inkjet configuration" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Boot" +#: ../../printer/printerdrake.pm_.c:1719 +msgid "" +"The inkjet printer drivers provided by Lexmark only support local printers, " +"no printers on remote machines or print server boxes. Please connect your " +"printer to a local port or configure it on the machine where it is connected " +"to." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid " and the CD is in the drive" +#: ../../printer/printerdrake.pm_.c:1746 +msgid "" +"To be able to print with your Lexmark inkjet and this configuration, you " +"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." +"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " +"\"Linux\" as operating system. The drivers come as RPM packages or shell " +"scripts with interactive graphical installation. You do not need to do this " +"configuration by the graphical frontends. Cancel directly after the license " +"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " +"adjust the head alignment settings with this program." msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Tuner type:" +#: ../../printer/printerdrake.pm_.c:1749 +msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1750 msgid "" -"Now, it's time to select a printing system for your computer. Other OSs may\n" -"offer you one, but Mandrake Linux offers two. Each of the printing system\n" -"is best suited to particular types of configuration.\n" +"Your printer belongs to the group of GDI laser printers (winprinters) sold " +"by different manufacturers which uses the Zenographics ZJ-stream raster " +"format for the data sent to the printer. The driver for these printers is " +"still in a very early development stage and so it will perhaps not always " +"work properly. Especially it is possible that the printer only works when " +"you choose the A4 paper size.\n" "\n" -" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" -"if you have a direct connection to your printer, you want to be able to\n" -"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" -"will handle only very simple network cases and is somewhat slow when used\n" -"with networks.) It's recommended that you use \"pdq\" if this is your first\n" -"experience with GNU/Linux.\n" +"Some of these printers, as the HP LaserJet 1000, for which this driver was " +"originally created, need their firmware to be uploaded to them after they " +"are turned on. In the case of the HP LaserJet 1000 you have to search the " +"printer's Windows driver CD or your Windows partition for the file " +"\"sihp1000.img\" and upload the file to the printer with one of the " +"following commands:\n" "\n" -" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" -"printing to your local printer or to one halfway around the planet. It is\n" -"simple to configure and can act as a server or a client for the ancient\n" -"\"lpd \" printing system, so it compatible with older operating systems\n" -"which may still need print services. While quite powerful, the basic setup\n" -"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" -"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" -"front-ends for printing or choosing printer options and for managing the\n" -"printer.\n" +" lpr -o raw sihp1000.img\n" +" cat sihp1000.img > /dev/usb/lp0\n" "\n" -"If you make a choice now, and later find that you don't like your printing\n" -"system you may change it by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button." +"The first command can be given by any normal user, the second must be given " +"as root. After having done so you can print normally.\n" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "\"Menu\" key" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:1972 msgid "" +"Printer default settings\n" "\n" -"\n" -"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted." +"You should make sure that the page size and the ink type/printing mode (if " +"available) and also the hardware configuration of laser printers (memory, " +"duplex unit, extra trays) are set correctly. Note that with a very high " +"printout quality/resolution printing can get substantially slower." msgstr "" -#: ../../standalone/draksec:1 +#: ../../printer/printerdrake.pm_.c:1981 #, c-format -msgid "Security Administrator:" +msgid "Option %s must be an integer number!" msgstr "" -#: ../../security/help.pm:1 +#: ../../printer/printerdrake.pm_.c:1985 #, c-format -msgid "Set the shell timeout. A value of zero means no timeout." +msgid "Option %s must be a number!" msgstr "" -#: ../../network/tools.pm:1 +#: ../../printer/printerdrake.pm_.c:1989 #, c-format -msgid "Firmware copy succeeded" +msgid "Option %s out of range!" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 +#: ../../printer/printerdrake.pm_.c:2028 #, c-format msgid "" -"You can't use another CDROM when the following programs are running: \n" -"%s" +"Do you want to set this printer (\"%s\")\n" +"as the default printer?" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check permissions of files in the users' home." +#: ../../printer/printerdrake.pm_.c:2051 +msgid "Test pages" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2052 msgid "" -"You don't have an Internet connection.\n" -"Create one first by clicking on 'Configure'" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Fonts copy" +"Please select the test pages you want to print.\n" +"Note: the photo test page can take a rather long time to get printed and on " +"laser printers with too low memory it can even not come out. In most cases " +"it is enough to print the standard test page." msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automated" +#: ../../printer/printerdrake.pm_.c:2056 +msgid "No test pages" msgstr "" -#: ../../Xconfig/test.pm:1 -#, c-format -msgid "Do you want to test the configuration?" +#: ../../printer/printerdrake.pm_.c:2057 +msgid "Print" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP." +#: ../../printer/printerdrake.pm_.c:2114 +msgid "Standard test page" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save packages selection" +#: ../../printer/printerdrake.pm_.c:2117 +msgid "Alternative test page (Letter)" msgstr "" -#: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Actions" +#: ../../printer/printerdrake.pm_.c:2120 +msgid "Alternative test page (A4)" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Remove the last item" +#: ../../printer/printerdrake.pm_.c:2122 +msgid "Photo test page" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "User list to restore (only the most recent date per user is important)" +#: ../../printer/printerdrake.pm_.c:2126 +msgid "Do not print any test page" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No net boot images created!" +#: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285 +msgid "Printing test page(s)..." msgstr "" -#: ../../network/adsl.pm:1 +#: ../../printer/printerdrake.pm_.c:2159 #, c-format -msgid "use pptp" +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" +"Printing status:\n" +"%s\n" +"\n" msgstr "" -#: ../../services.pm:1 ../../services.pm:1 -#, c-format -msgid "Choose which services should be automatically started at boot time" +#: ../../printer/printerdrake.pm_.c:2163 +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check files/directories writable by everybody" +#: ../../printer/printerdrake.pm_.c:2170 +msgid "Did it work properly?" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Learn how to use this printer" +#: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229 +msgid "Raw printer" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:2216 #, c-format -msgid "Configure the network now" +msgid "" +"To print a file from the command line (terminal window) you can either use " +"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " +"\"kprinter <file>\". The graphical tools allow you to choose the printer and " +"to modify the option settings easily.\n" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose a mirror from which to get the packages" +#: ../../printer/printerdrake.pm_.c:2218 +msgid "" +"These commands you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications, but here do not supply the file name " +"because the file to print is provided by the application.\n" msgstr "" -#: ../../install_interactive.pm:1 +#: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238 +#: ../../printer/printerdrake.pm_.c:2248 #, c-format msgid "" -"The FAT resizer is unable to handle your partition, \n" -"the following error occured: %s" +"\n" +"The \"%s\" command also allows to modify the option settings for a " +"particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s <file>\". " msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264 #, c-format -msgid "Size: " +msgid "" +"To know about the options available for the current printer read either the " +"list shown below or click on the \"Print option list\" button.%s%s\n" +"\n" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which sector do you want to move it to?" +#: ../../printer/printerdrake.pm_.c:2228 +msgid "" +"Here is a list of the available printing options for the current printer:\n" +"\n" msgstr "" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243 #, c-format -msgid "Bahamas" +msgid "" +"To print a file from the command line (terminal window) use the command \"%s " +"<file>\".\n" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Do you want to click on this button?" +#: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245 +#: ../../printer/printerdrake.pm_.c:2255 +msgid "" +"This command you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications. But here do not supply the file name " +"because the file to print is provided by the application.\n" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../standalone/drakups:1 -#, c-format -msgid "Manual configuration" +#: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250 +msgid "" +"To get a list of the options available for the current printer click on the " +"\"Print option list\" button." msgstr "" -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm_.c:2253 #, c-format msgid "" -"This package loads the selected keyboard map as set in\n" -"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" -"You should leave this enabled for most machines." +"To print a file from the command line (terminal window) use the command \"%s " +"<file>\" or \"%s <file>\".\n" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "search" +#: ../../printer/printerdrake.pm_.c:2257 +msgid "" +"You can also use the graphical interface \"xpdq\" for setting options and " +"handling printing jobs.\n" +"If you are using KDE as desktop environment you have a \"panic button\", an " +"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " +"jobs immediately when you click it. This is for example useful for paper " +"jams.\n" msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm_.c:2261 #, c-format -msgid "Xpmac (installation display driver)" +msgid "" +"\n" +"The \"%s\" and \"%s\" commands also allow to modify the option settings for " +"a particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s <file>\".\n" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm_.c:2271 #, c-format -msgid "Zeroconf host name must not contain a ." +msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" -#: ../../security/help.pm:1 +#: ../../printer/printerdrake.pm_.c:2272 #, c-format -msgid " Accept/Refuse icmp echo." +msgid "Printing/Scanning on \"%s\"" msgstr "" -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm_.c:2274 #, c-format -msgid "" -"Syslog is the facility by which many daemons use to log messages\n" -"to various system log files. It is a good idea to always run syslog." +msgid "Printing/Photo Card Access on \"%s\"" msgstr "" -#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm_.c:2275 #, c-format -msgid "Unknown/Others" +msgid "Printing on the printer \"%s\"" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "No TV Card detected!" +#: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281 +#: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283 +#: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307 +#: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156 +#: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695 +#: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118 +msgid "Close" msgstr "" -#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Options" +#: ../../printer/printerdrake.pm_.c:2281 +msgid "Print option list" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:2301 #, c-format -msgid "The printer \"%s\" is set as the default printer now." +msgid "" +"Your multi-function device was configured automatically to be able to scan. " +"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " +"scanner when you have more than one) from the command line or with the " +"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " +"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" +"\" menu. Call also \"man scanimage\" on the command line to get more " +"information.\n" +"\n" +"Do not use \"scannerdrake\" for this device!" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2322 msgid "" -"You are configuring an OKI laser winprinter. These printers\n" -"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver." +"Your printer was configured automatically to give you access to the photo " +"card drives from your PC. Now you can access your photo cards using the " +"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " +"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " +"\"man mtools\" on the command line for more info). You find the card's file " +"system under the drive letter \"p:\", or subsequent drive letters when you " +"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " +"can switch between drive letters with the field at the upper-right corners " +"of the file lists." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" +#: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702 +#: ../../printer/printerdrake.pm_.c:2990 +msgid "Reading printer data..." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detected" +#: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391 +#: ../../printer/printerdrake.pm_.c:2426 +msgid "Transfer printer configuration" msgstr "" -#: ../../standalone/drakpxe:1 +#: ../../printer/printerdrake.pm_.c:2365 #, c-format msgid "" -"You are about to configure your computer to install a PXE server as a DHCP server\n" -"and a TFTP server to build an installation server.\n" -"With that feature, other computers on your local network will be installable using this computer as source.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)." +"You can copy the printer configuration which you have done for the spooler %" +"s to %s, your current spooler. All the configuration data (printer name, " +"description, location, connection type, and default option settings) is " +"overtaken, but jobs will not be transferred.\n" +"Not all queues can be transferred due to the following reasons:\n" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2368 msgid "" -"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n" -"What's more, OSS drivers all reinvent the wheel.\n" -"\n" -"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n" -"supports quite a large range of ISA, USB and PCI cards.\n" -"\n" -"It also provides a much higher API than OSS.\n" -"\n" -"To use alsa, one can either use:\n" -"- the old compatibility OSS api\n" -"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n" -"" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on." +"CUPS does not support printers on Novell servers or printers sending the " +"data into a free-formed command.\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the printer you want to set up or enter a device name/file name in the input line" +#: ../../printer/printerdrake.pm_.c:2370 +msgid "" +"PDQ only supports local printers, remote LPD printers, and Socket/TCP " +"printers.\n" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Refuse" +#: ../../printer/printerdrake.pm_.c:2372 +msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2374 msgid "" -"HardDrake runs a hardware probe, and optionally configures\n" -"new/changed hardware." +"In addition, queues not created with this program or \"foomatic-configure\" " +"cannot be transferred." msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "LOCAL" +#: ../../printer/printerdrake.pm_.c:2375 +msgid "" +"\n" +"Also printers configured with the PPD files provided by their manufacturers " +"or with native CUPS drivers cannot be transferred." msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "HFS" +#: ../../printer/printerdrake.pm_.c:2376 +msgid "" +"\n" +"Mark the printers which you want to transfer and click \n" +"\"Transfer\"." msgstr "" -#: ../../fs.pm:1 -#, c-format -msgid "Creating and formatting file %s" +#: ../../printer/printerdrake.pm_.c:2379 +msgid "Do not transfer printers" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check additions/removals of sgid files." +#: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396 +msgid "Transfer" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:2392 #, c-format msgid "" -"The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n" -"" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing LVM to add to" +"A printer named \"%s\" already exists under %s. \n" +"Click \"Transfer\" to overwrite it.\n" +"You can also type a new name or skip this printer." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "xfs restart" +#: ../../printer/printerdrake.pm_.c:2400 +msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm_.c:2405 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use the scanners on hosts: " -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselected All" +#: ../../printer/printerdrake.pm_.c:2413 +msgid "New printer name" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 +#: ../../printer/printerdrake.pm_.c:2416 #, c-format -msgid "No partition available" +msgid "Transferring %s..." msgstr "" -#: ../../standalone/printerdrake:1 +#: ../../printer/printerdrake.pm_.c:2427 #, c-format msgid "" -"Printer Management \n" -"" +"You have transferred your former default printer (\"%s\"), Should it be also " +"the default printer under the new printing system %s?" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Domain Name Resolver" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Encryption key (again)" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Samba share name missing!" +#: ../../printer/printerdrake.pm_.c:2437 +msgid "Refreshing printer data..." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type install done" +#: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516 +#: ../../printer/printerdrake.pm_.c:2528 +msgid "Configuration of a remote printer" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Detection in progress" +#: ../../printer/printerdrake.pm_.c:2446 +msgid "Starting network..." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Whole Kernel -->" +#: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483 +#: ../../printer/printerdrake.pm_.c:2485 +msgid "Configure the network now" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Welcome to %s" +#: ../../printer/printerdrake.pm_.c:2480 +msgid "Network functionality not configured" msgstr "" -#: ../../standalone/drakhelp:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2481 msgid "" -" drakhelp 0.1\n" -"Copyright (C) 2003 MandrakeSoft.\n" -"This is free software and may be redistributed under the terms of the GNU GPL.\n" -"\n" -"Usage: \n" -"" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Update Modules floppy in drive %s" +"You are going to configure a remote printer. This needs working network " +"access, but your network is not configured yet. If you go on without network " +"configuration, you will not be able to use the printer which you are " +"configuring now. How do you want to proceed?" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Bootsplash" +#: ../../printer/printerdrake.pm_.c:2484 +msgid "Go on without configuring the network" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2518 msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"is directly connected to your system" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer sharing on hosts/networks: " +"The network configuration done during the installation cannot be started " +"now. Please check whether the network gets accessable after booting your " +"system and correct the configuration using the Mandrake Control Center, " +"section \"Network & Internet\"/\"Connection\", and afterwards set up the " +"printer, also using the Mandrake Control Center, section \"Hardware\"/" +"\"Printer\"" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2519 msgid "" -"\n" -"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". " +"The network access was not running and could not be started. Please check " +"your configuration and your hardware. Then try to configure your remote " +"printer again." msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "" -"Receiving\n" -"speed:" +#: ../../printer/printerdrake.pm_.c:2529 +msgid "Restarting printing system..." msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "DrakClock" +#: ../../printer/printerdrake.pm_.c:2568 +msgid "high" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "" -"In some cases, the %s driver needs to have extra information to work\n" -"properly, although it normally works fine without them. Would you like to specify\n" -"extra options for it or allow the driver to probe your machine for the\n" -"information it needs? Occasionally, probing will hang a computer, but it should\n" -"not cause any damage." +#: ../../printer/printerdrake.pm_.c:2568 +msgid "paranoid" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm_.c:2569 #, c-format -msgid "Not the correct CD label. Disk is labelled %s." +msgid "Installing a printing system in the %s security level" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm_.c:2570 #, c-format msgid "" +"You are about to install the printing system %s on a system running in the %" +"s security level.\n" "\n" -"- Daemon, %s via:\n" -"" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Cuba" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "October" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Belize" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Searching for new printers..." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid " (multi-session)" +"This printing system runs a daemon (background process) which waits for " +"print jobs and handles them. This daemon is also accessable by remote " +"machines through the network and so it is a possible point for attacks. " +"Therefore only a few selected daemons are started by default in this " +"security level.\n" +"\n" +"Do you really want to configure printing on this machine?" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Kernel Boot Timeout" +#: ../../printer/printerdrake.pm_.c:2604 +msgid "Starting the printing system at boot time" msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm_.c:2605 #, c-format msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s.\n" -"Your card is supported by XFree %s which may have a better support in 2D." +"The printing system (%s) will not be started automatically when the machine " +"is booted.\n" +"\n" +"It is possible that the automatic starting was turned off by changing to a " +"higher security level, because the printing system is a potential point for " +"attacks.\n" +"\n" +"Do you want to have the automatic starting of the printing system turned on " +"again?" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid " Activate/Disable daily security check." +#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765 +msgid "Checking installed software..." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm_.c:2630 #, c-format -msgid "" -"\t-CD-R.\n" -"" +msgid "Removing %s ..." msgstr "" -#: ../../security/l10n.pm:1 +#: ../../printer/printerdrake.pm_.c:2636 #, c-format -msgid "Enable libsafe if libsafe is found on the system" +msgid "Installing %s ..." msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "The DrakX Partitioning wizard found the following solutions:" +#: ../../printer/printerdrake.pm_.c:2685 +msgid "Select Printer Spooler" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Hungarian" +#: ../../printer/printerdrake.pm_.c:2686 +msgid "Which printing system (spooler) do you want to use?" msgstr "" -#: ../../network/isdn.pm:1 +#: ../../printer/printerdrake.pm_.c:2720 #, c-format -msgid "" -"Select your provider.\n" -"If it isn't listed, choose Unlisted." +msgid "Configuring printer \"%s\"..." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Automatic time synchronization (using NTP)" +#: ../../printer/printerdrake.pm_.c:2731 +msgid "Installing Foomatic..." msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "Use my Windows partition" +#: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838 +#: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300 +msgid "Printer options" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "8 MB" +#: ../../printer/printerdrake.pm_.c:2810 +msgid "Preparing Printerdrake..." msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "LDAP Server" +#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369 +msgid "Configuring applications..." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"PCMCIA support is usually to support things like ethernet and\n" -"modems in laptops. It won't get started unless configured so it is safe to have\n" -"it installed on machines that don't need it." +#: ../../printer/printerdrake.pm_.c:2845 +msgid "Would you like to configure printing?" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose your country" +#: ../../printer/printerdrake.pm_.c:2857 +msgid "Printing system: " msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:2915 msgid "" -"\n" -"- System Files:\n" -"" +"The following printers are configured. Double-click on a printer to change " +"its settings; to make it the default printer; to view information about it; " +"or to make a printer on a remote CUPS server available for Star Office/" +"OpenOffice.org/GIMP." msgstr "" -#: ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 -#, c-format -msgid "Standalone Tools" +#: ../../printer/printerdrake.pm_.c:2916 +msgid "" +"The following printers are configured. Double-click on a printer to change " +"its settings; to make it the default printer; or to view information about " +"it." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Where" +#: ../../printer/printerdrake.pm_.c:2942 +msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "but not matching" +#: ../../printer/printerdrake.pm_.c:2960 +msgid "Change the printing system" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)." +#: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274 +msgid "Normal Mode" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Configuring PCMCIA cards..." +#: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176 +#: ../../printer/printerdrake.pm_.c:3363 +msgid "Do you want to configure another printer?" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "kdesu missing" +#: ../../printer/printerdrake.pm_.c:3211 +msgid "Modify printer configuration" msgstr "" -#: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 +#: ../../printer/printerdrake.pm_.c:3213 #, c-format msgid "" -"%s: %s requires a username...\n" -"" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Encryption key" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Microsoft IntelliMouse" +"Printer %s\n" +"What do you want to modify on this printer?" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "" -"This setting will be activated after the installation.\n" -"During installation, you will need to use the Right Control\n" -"key to switch between the different keyboard layouts." +#: ../../printer/printerdrake.pm_.c:3217 +msgid "Do it!" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Christmas Island" +#: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271 +msgid "Printer connection type" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Automatic" +#: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275 +msgid "Printer name, description, location" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installation of bootloader failed. The following error occured:" +#: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293 +msgid "Printer manufacturer, model, driver" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "EIDE/SCSI channel" +#: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294 +msgid "Printer manufacturer, model" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format +#: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304 msgid "Set this printer as the default" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Verify that %s is the correct path" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "partition %s" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Paranoid" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "NIS" +#: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309 +msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "<-- Del User" +#: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314 +msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Location on the bus" +#: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319 +msgid "Print test pages" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No printer found!" +#: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321 +msgid "Know how to use this printer" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the vendor name of the device" +#: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323 +msgid "Remove printer" msgstr "" -#: ../../help.pm:1 ../../install_interactive.pm:1 +#: ../../printer/printerdrake.pm_.c:3282 #, c-format -msgid "Erase entire disk" +msgid "Removing old printer \"%s\"..." msgstr "" -#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Default)" +#: ../../printer/printerdrake.pm_.c:3307 +msgid "Default printer" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../printer/printerdrake.pm_.c:3308 #, c-format -msgid "Automatic reconfiguration" +msgid "The printer \"%s\" is set as the default printer now." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Turks and Caicos Islands" +#: ../../printer/printerdrake.pm_.c:3310 +msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../printer/printerdrake.pm_.c:3312 #, c-format -msgid "No Ip" +msgid "" +"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm_.c:3313 #, c-format -msgid "<- Previous" +msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Transfer Now" +#: ../../printer/printerdrake.pm_.c:3315 +msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm_.c:3317 #, c-format -msgid "Set root password and network authentication methods" +msgid "" +"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" +"GIMP." msgstr "" -#: ../../ugtk2.pm:1 +#: ../../printer/printerdrake.pm_.c:3318 #, c-format -msgid "Toggle between flat and group sorted" +msgid "" +"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../printer/printerdrake.pm_.c:3325 #, c-format -msgid "Themes" +msgid "Do you really want to remove the printer \"%s\"?" msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm_.c:3329 #, c-format -msgid "Options: %s" +msgid "Removing printer \"%s\"..." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../raid.pm_.c:35 #, c-format -msgid "OKI winprinter configuration" +msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saint Helena" +#: ../../raid.pm_.c:137 +msgid "mkraid failed" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Parallel port #%s" +#: ../../raid.pm_.c:137 +msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../raid.pm_.c:153 #, c-format -msgid "Security Level" +msgid "Not enough partitions for RAID level %d\n" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../security/main.pm_.c:36 msgid "" -"Some steps are not completed.\n" +"Standard: This is the standard security recommended for a computer that will " +"be used to connect\n" +" to the Internet as a client.\n" "\n" -"Do you really want to quit now?" +"High: There are already some restrictions, and more automatic checks " +"are run every night.\n" +"\n" +"Higher: The security is now high enough to use the system as a server " +"which can accept\n" +" connections from many clients. If your machine is only a " +"client on the Internet, you\n" +"\t should choose a lower level.\n" +"\n" +"Paranoid: This is similar to the previous level, but the system is entirely " +"closed and security\n" +" features are at their maximum\n" +"\n" +"Security Administrator:\n" +" If the 'Security Alerts' option is set, security alerts will " +"be sent to this user (username or\n" +"\t email)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Sudan" +#: ../../security/main.pm_.c:66 +msgid "Security Level:" msgstr "" -#: ../../keyboard.pm:1 +#: ../../security/main.pm_.c:77 #, c-format -msgid "Polish (qwertz layout)" +msgid " (default value: %s)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Syria" +#: ../../security/main.pm_.c:113 +msgid "Security Alerts:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" +#: ../../security/main.pm_.c:115 +msgid "Security Administrator:" msgstr "" -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#: ../../bootloader.pm:1 -#, c-format -msgid "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system from the list above or\n" -"wait %d seconds for default boot.\n" -"\n" -"" +#: ../../security/main.pm_.c:128 +msgid "Network Options" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Portuguese" +#: ../../security/main.pm_.c:128 +msgid "System Options" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: " +#: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164 +msgid "" +"The following options can be set to customize your\n" +"system security. If you need explanations, click on Help.\n" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "DNS server address should be in format 1.2.3.4" +#: ../../security/main.pm_.c:177 +msgid "Periodic Checks" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Left Control key" +#: ../../security/main.pm_.c:191 +msgid "Please wait, setting security level..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Serbia" +#: ../../security/main.pm_.c:197 +msgid "Please wait, setting security options..." msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Newzealand" +#: ../../services.pm_.c:19 +msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" -#: ../../fsedit.pm:1 ../../fsedit.pm:1 -#, c-format -msgid "This directory should remain within the root filesystem" +#: ../../services.pm_.c:20 +msgid "Anacron a periodic command scheduler." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Across Network" +#: ../../services.pm_.c:21 +msgid "" +"apmd is used for monitoring batery status and logging it via syslog.\n" +"It can also be used for shutting down the machine when the battery is low." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "CapsLock key" +#: ../../services.pm_.c:23 +msgid "" +"Runs commands scheduled by the at command at the time specified when\n" +"at was run, and runs batch commands when the load average is low enough." msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Install bootloader" +#: ../../services.pm_.c:25 +msgid "" +"cron is a standard UNIX program that runs user-specified programs\n" +"at periodic scheduled times. vixie cron adds a number of features to the " +"basic\n" +"UNIX cron, including better security and more powerful configuration options." msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Select the memory size of your graphics card" +#: ../../services.pm_.c:28 +msgid "" +"GPM adds mouse support to text-based Linux applications such the\n" +"Midnight Commander. It also allows mouse-based console cut-and-paste " +"operations,\n" +"and includes support for pop-up menus on the console." msgstr "" -#: ../../security/help.pm:1 -#, c-format +#: ../../services.pm_.c:31 msgid "" -"Enable/Disable crontab and at for users.\n" -"\n" -"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" -"and crontab(1))." +"HardDrake runs a hardware probe, and optionally configures\n" +"new/changed hardware." msgstr "" -#: ../../standalone.pm:1 -#, c-format +#: ../../services.pm_.c:33 msgid "" -"[OPTIONS]\n" -"Network & Internet connection and monitoring application\n" -"\n" -"--defaultintf interface : show this interface by default\n" -"--connect : connect to internet if not already connected\n" -"--disconnect : disconnect to internet if already connected\n" -"--force : used with (dis)connect : force (dis)connection.\n" -"--status : returns 1 if connected 0 otherwise, then exit.\n" -"--quiet : don't be interactive. To be used with (dis)connect." +"Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Dynamic IP Address Pool:" +#: ../../services.pm_.c:34 +msgid "" +"The internet superserver daemon (commonly called inetd) starts a\n" +"variety of other internet services as needed. It is responsible for " +"starting\n" +"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " +"disables\n" +"all of the services it is responsible for." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM name?" +#: ../../services.pm_.c:38 +msgid "" +"Launch packet filtering for Linux kernel 2.2 series, to set\n" +"up a firewall to protect your machine from network attacks." msgstr "" -#: ../../standalone/service_harddrake:1 -#, c-format +#: ../../services.pm_.c:40 msgid "" -"Some devices in the \"%s\" hardware class were removed:\n" -"" +"This package loads the selected keyboard map as set in\n" +"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" +"You should leave this enabled for most machines." msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "The firmware file %s does not exist or is unreadable!" +#: ../../services.pm_.c:43 +msgid "" +"Automatic regeneration of kernel header in /boot for\n" +"/usr/include/linux/{autoconf,version}.h" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Found %s %s interfaces" +#: ../../services.pm_.c:45 +msgid "Automatic detection and configuration of hardware at boot." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Post Install" +#: ../../services.pm_.c:46 +msgid "" +"Linuxconf will sometimes arrange to perform various tasks\n" +"at boot-time to maintain the system configuration." msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "The internal domain name" +#: ../../services.pm_.c:48 +msgid "" +"lpd is the print daemon required for lpr to work properly. It is\n" +"basically a server that arbitrates print jobs to printer(s)." msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IRQ" +#: ../../services.pm_.c:50 +msgid "" +"Linux Virtual Server, used to build a high-performance and highly\n" +"available server." msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "logdrake" +#: ../../services.pm_.c:52 +msgid "" +"named (BIND) is a Domain Name Server (DNS) that is used to resolve host " +"names to IP addresses." msgstr "" -#: ../../standalone.pm:1 -#, c-format +#: ../../services.pm_.c:53 msgid "" -"Font Importation and monitoring application \n" -"--windows_import : import from all available windows partitions.\n" -"--xls_fonts : show all fonts that already exist from xls\n" -"--strong : strong verification of font.\n" -"--install : accept any font file and any directry.\n" -"--uninstall : uninstall any font or any directory of font.\n" -"--replace : replace all font if already exist\n" -"--application : 0 none application.\n" -" : 1 all application available supported.\n" -" : name_of_application like so for staroffice \n" -" : and gs for ghostscript for only this one." +"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" +"Manager/Windows), and NCP (NetWare) mount points." msgstr "" -#: ../../standalone.pm:1 -#, c-format -msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" +#: ../../services.pm_.c:55 +msgid "" +"Activates/Deactivates all network interfaces configured to start\n" +"at boot time." msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Choose the floppy drive you want to use to make the bootdisk" +#: ../../services.pm_.c:57 +msgid "" +"NFS is a popular protocol for file sharing across TCP/IP networks.\n" +"This service provides NFS server functionality, which is configured via the\n" +"/etc/exports file." msgstr "" -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with text menu" +#: ../../services.pm_.c:60 +msgid "" +"NFS is a popular protocol for file sharing across TCP/IP\n" +"networks. This service provides NFS file locking functionality." msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Everything (no firewall)" +#: ../../services.pm_.c:62 +msgid "" +"Automatically switch on numlock key locker under console\n" +"and XFree at boot." msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "You must specify a kernel image" +#: ../../services.pm_.c:64 +msgid "Support the OKI 4w and compatible winprinters." msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on USB" +#: ../../services.pm_.c:65 +msgid "" +"PCMCIA support is usually to support things like ethernet and\n" +"modems in laptops. It won't get started unless configured so it is safe to " +"have\n" +"it installed on machines that don't need it." msgstr "" -#: ../../interactive/newt.pm:1 -#, c-format -msgid "Do" +#: ../../services.pm_.c:68 +msgid "" +"The portmapper manages RPC connections, which are used by\n" +"protocols such as NFS and NIS. The portmap server must be running on " +"machines\n" +"which act as servers for protocols which make use of the RPC mechanism." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Contacting the mirror to get the list of available packages..." +#: ../../services.pm_.c:71 +msgid "" +"Postfix is a Mail Transport Agent, which is the program that moves mail from " +"one machine to another." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian AZERTY (old)" +#: ../../services.pm_.c:72 +msgid "" +"Saves and restores system entropy pool for higher quality random\n" +"number generation." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Brazilian (ABNT-2)" +#: ../../services.pm_.c:74 +msgid "" +"Assign raw devices to block devices (such as hard drive\n" +"partitions), for the use of applications such as Oracle" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address of host/network:" +#: ../../services.pm_.c:76 +msgid "" +"The routed daemon allows for automatic IP router table updated via\n" +"the RIP protocol. While RIP is widely used on small networks, more complex\n" +"routing protocols are needed for complex networks." msgstr "" -#: ../../standalone/draksplash:1 -#, c-format +#: ../../services.pm_.c:79 msgid "" -"the progress bar y coordinate\n" -"of its upper left corner" +"The rstat protocol allows users on a network to retrieve\n" +"performance metrics for any machine on that network." msgstr "" -#: ../../install_gtk.pm:1 -#, c-format -msgid "System installation" +#: ../../services.pm_.c:81 +msgid "" +"The rusers protocol allows users on a network to identify who is\n" +"logged in on other responding machines." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saint Vincent and the Grenadines" +#: ../../services.pm_.c:83 +msgid "" +"The rwho protocol lets remote users get a list of all of the users\n" +"logged into a machine running the rwho daemon (similiar to finger)." msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid reboot by the console user." +#: ../../services.pm_.c:85 +msgid "Launch the sound system on your machine" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Open" +#: ../../services.pm_.c:86 +msgid "" +"Syslog is the facility by which many daemons use to log messages\n" +"to various system log files. It is a good idea to always run syslog." msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Location of auto_install.cfg file" +#: ../../services.pm_.c:88 +msgid "Load the drivers for your usb devices." msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Open Firmware Delay" +#: ../../services.pm_.c:89 +msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Hungary" +#: ../../services.pm_.c:115 ../../services.pm_.c:157 +msgid "Choose which services should be automatically started at boot time" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "New Zealand" +#: ../../services.pm_.c:127 +msgid "Printing" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Color configuration" +#: ../../services.pm_.c:128 +msgid "Internet" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "There are already some restrictions, and more automatic checks are run every night." +#: ../../services.pm_.c:131 +msgid "File sharing" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "please choose the date to restore" +#: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709 +msgid "System" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Netherlands Antilles" +#: ../../services.pm_.c:138 +msgid "Remote Administration" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Switching from ext2 to ext3" +#: ../../services.pm_.c:146 +msgid "Database Server" msgstr "" -#: ../../printer/data.pm:1 +#: ../../services.pm_.c:175 #, c-format -msgid "LPRng" +msgid "Services: %d activated for %d registered" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Browse to new restore repository." +#: ../../services.pm_.c:191 +msgid "Services" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n" -"\n" -"It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types." +#: ../../services.pm_.c:203 +msgid "running" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "and %d unknown printers" +#: ../../services.pm_.c:203 +msgid "stopped" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)" +#: ../../services.pm_.c:217 +msgid "Services and deamons" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../services.pm_.c:222 msgid "" -"Backup quota exceeded!\n" -"%d MB used vs %d MB allocated." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "No ISDN PCI card found. Please select one on the next screen." +"No additional information\n" +"about this service, sorry." msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "GB" +#: ../../services.pm_.c:229 +msgid "On boot" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Please give a user name" +#: ../../services.pm_.c:241 +msgid "Start" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Enable CD Boot?" +#: ../../services.pm_.c:241 +msgid "Stop" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Simply reboot" +#: ../../share/advertising/01-thanks.pl_.c:9 +msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/logdrake:1 -#, c-format -msgid "Congratulations" +#: ../../share/advertising/01-thanks.pl_.c:10 +msgid "Welcome to the Open Source world" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid " enter `void' for void entry" +#: ../../share/advertising/01-thanks.pl_.c:11 +msgid "" +"The success of MandrakeSoft is based upon the principle of Free Software. " +"Your new operating system is the result of collaborative work on the part of " +"the worldwide Linux Community" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backups on unmountable media - Use Catalog to restore" +#: ../../share/advertising/02-community.pl_.c:9 +msgid "Get involved in the Free Software world" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "January" +#: ../../share/advertising/02-community.pl_.c:10 +msgid "Want to know more about the Open Source community?" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Password history length" +#: ../../share/advertising/02-community.pl_.c:11 +msgid "" +"To share your own knowledge and help build Linux tools, join the discussion " +"forums you'll find on our \"Community\" webpages" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Winmodem connection" +#: ../../share/advertising/03-internet.pl_.c:9 +msgid "Get the most from the Internet" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../share/advertising/03-internet.pl_.c:10 msgid "" -"\n" -"Congratulations, your printer is now installed and configured!\n" -"\n" -"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n" -"\n" -"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center." +"Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " +"view animations with Mozilla and Konqueror, or read your mail and handle " +"your personal information with Evolution and Kmail" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"Now, you can run xawtv (under X Window!) !\n" -"" +#: ../../share/advertising/04-multimedia.pl_.c:9 +msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Not enough swap space to fulfill installation, please add some" +#: ../../share/advertising/04-multimedia.pl_.c:10 +msgid "Push multimedia to its limits!" msgstr "" -#. -PO: example: lilo-graphic on /dev/hda1 -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "%s on %s" +#: ../../share/advertising/04-multimedia.pl_.c:11 +msgid "" +"Mandrake Linux 9.0 enables you to use the very latest software to play audio " +"files, edit and handle your images or photos, and play videos" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid remote root login." +#: ../../share/advertising/05-games.pl_.c:9 +msgid "Games" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../share/advertising/05-games.pl_.c:10 msgid "" -"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" -"local time according to the time zone you selected. If the clock on your\n" -"motherboard is set to local time, you may deactivate this by unselecting\n" -"\"%s\", which will let GNU/Linux know that the system clock and the\n" -"hardware clock are in the same timezone. This is useful when the machine\n" -"also hosts another operating system like Windows.\n" -"\n" -"The \"%s\" option will automatically regulate the clock by connecting to a\n" -"remote time server on the Internet. For this feature to work, you must have\n" -"a working Internet connection. It is best to choose a time server located\n" -"near you. This option actually installs a time server that can used by\n" -"other machines on your local network as well." +"Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " +"strategy, ..." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't create log file!" +#: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49 +msgid "Mandrake Control Center" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 -#, c-format -msgid "Which is your timezone?" +#: ../../share/advertising/06-mcc.pl_.c:10 +msgid "" +"Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " +"your machine" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use .backupignore files" +#: ../../share/advertising/07-desktop.pl_.c:9 +msgid "User interfaces" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Guinea" +#: ../../share/advertising/07-desktop.pl_.c:10 +msgid "" +"Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " +"modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "The system is now connected to the Internet." +#: ../../share/advertising/08-development.pl_.c:9 +msgid "Development simplified" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "South Georgia and the South Sandwich Islands" +#: ../../share/advertising/08-development.pl_.c:10 +msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Japan (broadcast)" +#: ../../share/advertising/08-development.pl_.c:11 +msgid "" +"Use the full power of the GNU gcc 3 compiler as well as the best Open Source " +"development environments" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Fragmentation" +#: ../../share/advertising/09-server.pl_.c:9 +msgid "Turn your machine into a reliable server" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../share/advertising/09-server.pl_.c:10 msgid "" -"Monitor\n" -"\n" -" The installer will normally automatically detect and configure the\n" -"monitor connected to your machine. If it is incorrect, you can choose from\n" -"this list the monitor you actually have connected to your computer." +"Transform your machine into a powerful Linux server with a few clicks of " +"your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Mozambique" +#: ../../share/advertising/10-mnf.pl_.c:9 +msgid "Optimize your security" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "The wizard successfully configured the mail alert." +#: ../../share/advertising/10-mnf.pl_.c:10 +msgid "" +"The MandrakeSecurity range includes the Multi Network Firewall product (M.N." +"F.)" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Icon" +#: ../../share/advertising/10-mnf.pl_.c:11 +msgid "" +"This firewall product includes network features that allow you to fulfill " +"all your security needs" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 -#, c-format -msgid "Kill those programs" +#: ../../share/advertising/10-mnf.pl_.c:12 +msgid "This product is available on MandrakeStore website" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please choose what you want to backup" +#: ../../share/advertising/11-mdkstore.pl_.c:9 +msgid "The official MandrakeSoft store" msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "256 colors (8 bits)" +#: ../../share/advertising/11-mdkstore.pl_.c:10 +msgid "" +"Our full range of Linux solutions, as well as special offers on products and " +"other \"goodies,\" are available online on our e-store:" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Read-write" +#: ../../share/advertising/12-mdkstore.pl_.c:9 +msgid "Strategic partners" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" -"Size: %s\n" -"" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Hostname: " +"MandrakeSoft works alongside a selection of companies offering professional " +"solutions compatible with Mandrake Linux. A list of these partners is " +"available on the MandrakeStore" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Add a rule" +#: ../../share/advertising/13-mdkcampus.pl_.c:9 +msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" -"Chunk size %s\n" -"" +"The training program has been created to respond to the needs of both end " +"users and experts (Network and System administrators)" msgstr "" -#: ../advertising/02-community.pl:1 -#, c-format -msgid "Build the future of Linux!" +#: ../../share/advertising/13-mdkcampus.pl_.c:11 +msgid "Certify yourself on Linux" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Local Printer" +#: ../../share/advertising/13-mdkcampus.pl_.c:12 +msgid "" +"Whether you choose to teach yourself online or via our network of training " +"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " +"certification program (worldwide professional technical certification)" msgstr "" -#: ../../network/tools.pm:1 -#, c-format -msgid "Floppy access error, unable to mount device %s" +#: ../../share/advertising/14-mdkexpert.pl_.c:9 +msgid "Become a MandrakeExpert" msgstr "" -#: ../../standalone.pm:1 -#, c-format -msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" +#: ../../share/advertising/14-mdkexpert.pl_.c:10 +msgid "" +"Find the solutions of your problems via MandrakeSoft's online support " +"platform" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "ADSL connection" +#: ../../share/advertising/14-mdkexpert.pl_.c:11 +msgid "" +"Join the MandrakeSoft support teams and the Linux Community online to share " +"your knowledge and help others by becoming a recognized Expert on the online " +"technical support website:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"No configuration, please click Wizard or Advanced.\n" -"" +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 +msgid "MandrakeExpert Corporate" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Error!" +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 +msgid "An online platform to respond to company's specific support needs" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Permission denied transferring %s to %s" +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 +msgid "" +"All incidents will be followed up by a single qualified MandrakeSoft " +"technical expert." msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Report Bug" +#: ../../share/advertising/17-mdkclub.pl_.c:9 +msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Dominica" +#: ../../share/advertising/17-mdkclub.pl_.c:10 +msgid "" +"MandrakeClub and Mandrake Corporate Club were created for business and " +"private users of Mandrake Linux who would like to directly support their " +"favorite Linux distribution while also receiving special privileges. If you " +"enjoy our products, if your company benefits from our products to gain a " +"competititve edge, if you want to support Mandrake Linux development, join " +"MandrakeClub!" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Resize" +#: ../../standalone.pm_.c:21 +msgid "" +"This program is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2, or (at your option)\n" +"any later version.\n" +"\n" +"This program is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with this program; if not, write to the Free Software\n" +"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../standalone.pm_.c:40 msgid "" -"Resolution: %s\n" -"" +"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" +"Backup and Restore application\n" +"\n" +"--default : save default directories.\n" +"--debug : show all debug messages.\n" +"--show-conf : list of files or directories to backup.\n" +"--config-info : explain configuration file options (for non-X " +"users).\n" +"--daemon : use daemon configuration. \n" +"--help : show this message.\n" +"--version : show version name.\n" msgstr "" -#: ../../install2.pm:1 -#, c-format -msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)" +#: ../../standalone.pm_.c:51 +msgid "" +"[OPTIONS] [PROGRAM_NAME]\n" +"\n" +"OPTIONS:\n" +" --help - print this help message.\n" +" --report - program should be one of mandrake tools\n" +" --incident - program should be one of mandrake tools" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone.pm_.c:57 msgid "" -"Please select the correct port. For example, the \"COM1\" port under\n" -"Windows is named \"ttyS0\" under GNU/Linux." +"Font Importation and monitoring " +"application \n" +"--windows_import : import from all available windows partitions.\n" +"--xls_fonts : show all fonts that already exist from xls\n" +"--strong : strong verification of font.\n" +"--install : accept any font file and any directry.\n" +"--uninstall : uninstall any font or any directory of font.\n" +"--replace : replace all font if already exist\n" +"--application : 0 none application.\n" +" : 1 all application available supported.\n" +" : name_of_application like so for staroffice \n" +" : and gs for ghostscript for only this one." msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be removed" +#: ../../standalone.pm_.c:68 +msgid "" +"[OPTIONS]...\n" +"\t --debug print debugging information" msgstr "" -#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "Connect to the Internet" +#: ../../standalone.pm_.c:70 +msgid "" +"[OPTIONS]...\n" +"Mandrake Terminal Server Configurator\n" +"--enable : enable MTS\n" +"--disable : disable MTS\n" +"--start : start MTS\n" +"--stop : stop MTS\n" +"--adduser : add an existing system user to MTS (requires username)\n" +"--deluser : delete an existing system user from MTS (requires " +"username)\n" +"--addclient : add a client machine to MTS (requires MAC address, IP, " +"nbi image name)\n" +"--delclient : delete a client machine from MTS (requires MAC address, " +"IP, nbi image name)" msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use existing partitions" +#: ../../standalone.pm_.c:82 +msgid "[keyboard]" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Canadian (Quebec)" +#: ../../standalone.pm_.c:83 +msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format +#: ../../standalone.pm_.c:84 msgid "" -"Mouse device: %s\n" -"" +"[OPTIONS]\n" +"Network & Internet connection and monitoring application\n" +"\n" +"--defaultintf interface : show this interface by default\n" +"--connect : connect to internet if not already connected\n" +"--disconnect : disconnect to internet if already connected\n" +"--force : used with (dis)connect : force (dis)connection.\n" +"--status : returns 1 if connected 0 otherwise, then exit.\n" +"--quiet : don't be interactive. To be used with (dis)connect." msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Reselect correct fonts" +#: ../../standalone.pm_.c:93 +msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone.pm_.c:94 msgid "" -"Options\n" -"\n" -" Here you can choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"%s\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The firmware file for your %s was successfully installed." +"[OPTION]...\n" +" --no-confirmation don't ask first confirmation question in " +"MandrakeUpdate mode\n" +" --no-verify-rpm don't verify packages signatures\n" +" --changelog-first display changelog before filelist in the " +"description window\n" +" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" -#: ../advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "MandrakeExpert Corporate" +#: ../../standalone.pm_.c:99 +msgid "" +"[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] " +"[--dynamic=dev]" msgstr "" -#: ../../standalone.pm:1 -#, c-format +#: ../../standalone.pm_.c:100 msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone.pm_.c:114 #, c-format -msgid "Write protection" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "You've not selected any font" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Language" +msgid "" +"\n" +"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" +"testing] [-v|--version] " msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer model selection" +#: ../../standalone.pm_.c:168 +msgid "Installing packages..." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After changing type of partition %s, all data on this partition will be lost" +#: ../../standalone/XFdrake_.c:138 +msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" -#: ../../harddrake/data.pm:1 +#: ../../standalone/XFdrake_.c:142 #, c-format -msgid "ISDN adapters" +msgid "Please relog into %s to activate the changes" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "%d seconds" +#: ../../standalone/drakTermServ_.c:239 +msgid "Mandrake Terminal Server Configuration" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "Insert a blank floppy in drive %s" +#: ../../standalone/drakTermServ_.c:253 +msgid "Enable Server" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "A valid URI must be entered!" +#: ../../standalone/drakTermServ_.c:260 +msgid "Disable Server" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "Found \"%s\" interface do you want to use it ?" +#: ../../standalone/drakTermServ_.c:268 +msgid "Start Server" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Re-configure interface and DHCP server" +#: ../../standalone/drakTermServ_.c:275 +msgid "Stop Server" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Sound configuration" +#: ../../standalone/drakTermServ_.c:283 +msgid "Etherboot Floppy/ISO" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo test page" +#: ../../standalone/drakTermServ_.c:288 +msgid "Net Boot Images" msgstr "" -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Custom disk partitioning" +#: ../../standalone/drakTermServ_.c:294 +msgid "Add/Del Users" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter Printer Name and Comments" +#: ../../standalone/drakTermServ_.c:299 +msgid "Add/Del Clients" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakTermServ_.c:328 msgid "" -"The following printers\n" "\n" -"%s%s\n" -"are directly connected to your system" -msgstr "" - -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "You don't have any winmodem" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "type: %s" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTY)" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This should be a comma-separated list of local users or email addresses that you want the backup results sent to. You will need a functioning mail transfer agent setup on your system." +" Copyright (C) 2002 by MandrakeSoft \n" +"\tStew Benedict sbenedict\\@mandrakesoft.com\n" +"\n" msgstr "" -#: ../../standalone/drakups:1 -#, c-format +#: ../../standalone/drakTermServ_.c:332 msgid "" -"This is DrakUPS, a Mandrake configuration tool for UPS devices.\n" "\n" -"Author:</span> Thierry Vignaud <tvignaud@mandrakesoft.com>\n" "\n" -"" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Install firmware for the" -msgstr "" - -#: ../../standalone/draksound:1 -#, c-format -msgid "No Sound Card detected!" -msgstr "" - -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Mouse Port" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check for unsecured accounts" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -"Need to restart the Display Manager for full changes to take effect. \n" -"(service dm restart - at the console)" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Ftp Server" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Uganda" -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "%s fonts conversion" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the type of bus on which the mouse is connected" +" Thanks:\n" +"\t- LTSP Project http://www.ltsp.org\n" +"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n" +"\n" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakTermServ_.c:365 msgid "" -"As a review, DrakX will present a summary of information it has about your\n" -"system. Depending on your installed hardware, you may have some or all of\n" -"the following entries. Each entry is made up of the configuration item to\n" -"be configured, followed by a quick summary of the current configuration.\n" -"Click on the corresponding \"%s\" button to change that.\n" -"\n" -" * \"%s\": check the current keyboard map configuration and change that if\n" -"necessary.\n" -"\n" -" * \"%s\": check the current country selection. If you are not in this\n" -"country, click on the \"%s\" button and choose another one. If your country\n" -"is not in the first list shown, click the \"%s\" button to get the complete\n" -"country list.\n" -"\n" -" * \"%s\": By default, DrakX deduces your time zone based on the country\n" -"you have chosen. You can click on the \"%s\" button here if this is not\n" -"correct.\n" -"\n" -" * \"%s\": check the current mouse configuration and click on the button to\n" -"change it if necessary.\n" -"\n" -" * \"%s\": clicking on the \"%s\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation.\n" -"\n" -" * \"%s\": if a sound card is detected on your system, it is displayed\n" -"here. If you notice the sound card displayed is not the one that is\n" -"actually present on your system, you can click on the button and choose\n" -"another driver.\n" -"\n" -" * \"%s\": by default, DrakX configures your graphical interface in\n" -"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" -"\"%s\" to reconfigure your graphical interface.\n" +"drakTermServ Overview\n" +"\t\t\t \n" +" - Create Etherboot Enabled Boot Images:\n" +" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " +"must be created.\n" +" \t\tmkinitrd-net does much of this work and drakTermServ is just a " +"graphical interface\n" +" \t\tto help manage/customize these images.\n" "\n" -" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" -"If you have a TV card and it is not detected, click on \"%s\" to try to\n" -"configure it manually.\n" +" - Maintain /etc/dhcpd.conf:\n" +" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " +"assigning an IP address\n" +" \t\tand net boot images to the machine. drakTermServ helps create/" +"remove these entries.\n" +"\t\t\t\n" +" \t\t(PCI cards may omit the image - etherboot will request the " +"correct image. You should\n" +" \t\talso consider that when etherboot looks for the images, it " +"expects names like\n" +" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" +"\t\t\t \n" +" \t\tA typical dhcpd.conf stanza to support a diskless client looks " +"like:\n" +" \t\t\n" +"\t\t\t\thost curly {\n" +"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" +"\t\t\t\t\tfixed-address 192.168.192.3;\n" +"\t\t\t\t\t/*type fat;*/\n" +"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." +"nbi\";\n" +"\t\t\t\t}\n" +"\t\t\t\n" +"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " +"entry for\n" +"\t\t\ta client machine, using a fixed address scheme facilitates using the " +"functionality\n" +"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" +"\t\t\t\n" +"\t\t\tNote: The \"/*type\" entry is only used by drakTermServ. Clients can " +"either be \"thin\"*/\n" +"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " +"while fat clients run most\n" +"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" +"$IP=client_ip\\$\\$ is\n" +"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " +"gdm.conf are modified\n" +"\t\t\tif thin clients are used, to enable xdmcp. Since there are security " +"issues in using xdmcp,\n" +"\t\t\thosts.deny and hosts.allow are modified to limit access to the local " +"subnet.\n" +"\t\t\t\n" +"\t\t\tNote: You must stop/start the server after adding or changing " +"clients.\n" +"\t\t\t\n" +" - Maintain /etc/exports:\n" +" \t\tClusternfs allows export of the root filesystem to diskless " +"clients. drakTermServ\n" +" \t\tsets up the correct entry to allow anonymous access to the root " +"filesystem from\n" +" \t\tdiskless clients.\n" "\n" -" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" -"here. You can click on \"%s\" to change the parameters associated with the\n" -"card.\n" +" \t\tA typical exports entry for clusternfs is:\n" +" \t\t\n" +" \t\t/ (ro,all_squash)\n" +" \t\t/home SUBNET/MASK(rw,root_squash)\n" +"\t\t\t\n" +"\t\t\tWith SUBNET/MASK being defined for your network.\n" +" \t\t\n" +" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" +" \t\tFor users to be able to log into the system from a diskless " +"client, their entry in\n" +" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" +"\\$. drakTermServ helps\n" +" \t\tin this respect by adding or removing system users from this " +"file.\n" +"\n" +" - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" +" \t\tThrough clusternfs, each diskless client can have it's own " +"unique configuration files\n" +" \t\ton the root filesystem of the server. In the future drakTermServ " +"will help create these\n" +" \t\tfiles.\n" "\n" -" * \"%s\": If you want to configure your Internet or local network access\n" -"now.\n" +" - Per client system configuration files:\n" +" \t\tThrough clusternfs, each diskless client can have it's own " +"unique configuration files\n" +" \t\ton the root filesystem of the server. In the future, " +"drakTermServ can help create files\n" +" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" +"keyboard on a per-client\n" +" \t\tbasis.\n" "\n" -" * \"%s\": this entry allows you to redefine the security level as set in a\n" -"previous step ().\n" +" - /etc/xinetd.d/tftp:\n" +" \t\tdrakTermServ will configure this file to work in conjunction " +"with the images created by\n" +" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " +"the boot image to each\n" +" \t\tdiskless client.\n" "\n" -" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" -"idea to protect yourself from intrusions by setting up a firewall. Consult\n" -"the corresponding section of the ``Starter Guide'' for details about\n" -"firewall settings.\n" +" \t\tA typical tftp configuration file looks like:\n" +" \t\t\n" +" \t\tservice tftp\n" +" \t\t(\n" +" disable = no\n" +" socket_type = dgram\n" +" protocol = udp\n" +" wait = yes\n" +" user = root\n" +" server = /usr/sbin/in.tftpd\n" +" server_args = -s /var/lib/tftpboot\n" +" \t\t}\n" +" \t\t\n" +" \t\tThe changes here from the default installation are changing the " +"disable flag to\n" +" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " +"mkinitrd-net\n" +" \t\tputs it's images.\n" "\n" -" * \"%s\": if you wish to change your bootloader configuration, click that\n" -"button. This should be reserved to advanced users.\n" +" - Create etherboot floppies/CDs:\n" +" \t\tThe diskless client machines need either ROM images on the NIC, " +"or a boot floppy\n" +" \t\tor CD to initate the boot sequence. drakTermServ will help " +"generate these images,\n" +" \t\tbased on the NIC in the client machine.\n" +" \t\t\n" +" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " +"manually:\n" +" \t\t\n" +" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/" +"etherboot/lzrom/3c509.lzrom > /dev/fd0\n" +" \n" "\n" -" * \"%s\": here you'll be able to fine control which services will be run\n" -"on your machine. If you plan to use this machine as a server it's a good\n" -"idea to review this setup." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Comoros" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "May" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic 3 Button Mouse" -msgstr "" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "USA (cable)" -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"Can't relaunch LiLo!\n" -"Launch \"lilo\" as root in command line to complete LiLo theme installation." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select another media to restore from" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Software Manager" +#: ../../standalone/drakTermServ_.c:488 +msgid "Boot Floppy" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Re-submit" +#: ../../standalone/drakTermServ_.c:490 +msgid "Boot ISO" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "CD in place - continue." +#: ../../standalone/drakTermServ_.c:559 +msgid "Build Whole Kernel -->" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "KB" +#: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591 +msgid "This will take a few minutes." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Network & Internet" +#: ../../standalone/drakTermServ_.c:573 +msgid "No kernel selected!" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"phonetic\" QWERTY" +#: ../../standalone/drakTermServ_.c:576 +msgid "Build Single NIC -->" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Net Boot Images" +#: ../../standalone/drakTermServ_.c:587 +msgid "No nic selected!" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Sharing of local scanners" +#: ../../standalone/drakTermServ_.c:590 +msgid "Build All Kernels -->" msgstr "" -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Plug'n Play probing failed. Please select the correct monitor" +#: ../../standalone/drakTermServ_.c:604 +msgid "<-- Delete" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Services and deamons" +#: ../../standalone/drakTermServ_.c:611 +msgid "Delete All NBIs" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "It is possible that your %s needs its Firmware to be uploaded everytime when it is turned on." +#: ../../standalone/drakTermServ_.c:668 +msgid "" +"!!! Indicates the password in the system database is different than\n" +" the one in the Terminal Server database.\n" +"Delete/re-add the user to the Terminal Server to enable login." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name missing!" +#: ../../standalone/drakTermServ_.c:673 +msgid "Add User -->" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "with /usr" +#: ../../standalone/drakTermServ_.c:681 +msgid "<-- Del User" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakTermServ_.c:720 #, c-format -msgid "Network" +msgid "type: %s" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected to machines running Microsoft Windows" +#: ../../standalone/drakTermServ_.c:753 +msgid "No net boot images created!" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "This password is too simple" +#: ../../standalone/drakTermServ_.c:773 +msgid "Thin Client" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Chkconfig obey msec rules" +#: ../../standalone/drakTermServ_.c:775 +msgid "Allow Thin Clients" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Slovakian (QWERTZ)" +#: ../../standalone/drakTermServ_.c:778 +msgid "Add Client -->" msgstr "" -#: ../advertising/06-development.pl:1 -#, c-format -msgid "To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments." +#: ../../standalone/drakTermServ_.c:821 +msgid "<-- Edit Client" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No devices found" +#: ../../standalone/drakTermServ_.c:837 +msgid "Delete Client" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Truly minimal install (especially no urpmi)" +#: ../../standalone/drakTermServ_.c:843 +msgid "dhcpd Config..." msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "\"%s\" neither is a valid email nor is an existing local user!" +#: ../../standalone/drakTermServ_.c:876 +msgid "" +"Need to restart the Display Manager for full changes to take effect. \n" +"(service dm restart - at the console)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use daemon" +#: ../../standalone/drakTermServ_.c:894 +msgid "Subnet:" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../network/netconnect.pm:1 ../../standalone/drakauth:1 ../../standalone/drakconnect:1 ../../standalone/logdrake:1 -#, c-format -msgid "Authentication" +#: ../../standalone/drakTermServ_.c:901 +msgid "Netmask:" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add this printer to Star Office/OpenOffice.org/GIMP" +#: ../../standalone/drakTermServ_.c:908 +msgid "Routers:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Additional CUPS servers: " +#: ../../standalone/drakTermServ_.c:915 +msgid "Subnet Mask:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields." +#: ../../standalone/drakTermServ_.c:922 +msgid "Broadcast Address:" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount %s?" +#: ../../standalone/drakTermServ_.c:929 +msgid "Domain Name:" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Algeria" +#: ../../standalone/drakTermServ_.c:937 +msgid "Name Servers:" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Install/Update firmware files" +#: ../../standalone/drakTermServ_.c:948 +msgid "IP Range Start:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Via Network" +#: ../../standalone/drakTermServ_.c:949 +msgid "IP Range End:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use tar and bzip2 (rather than tar and gzip)" +#: ../../standalone/drakTermServ_.c:1001 +msgid "dhcpd Server Configuration" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Initrd-size" +#: ../../standalone/drakTermServ_.c:1002 +msgid "" +"Most of these values were extracted\n" +"from your running system.\n" +"You can modify as needed." msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then asked to choose the server that best\n" -"suits your needs." +#: ../../standalone/drakTermServ_.c:1005 +msgid "Dynamic IP Address Pool:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\tBackups use tar and gzip\n" -"" +#: ../../standalone/drakTermServ_.c:1018 +msgid "Write Config" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Set as default" +#: ../../standalone/drakTermServ_.c:1120 +msgid "Please insert floppy disk:" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "2 MB" +#: ../../standalone/drakTermServ_.c:1124 +msgid "Couldn't access the floppy!" msgstr "" -#: ../../printer/main.pm:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Configured on this machine" +#: ../../standalone/drakTermServ_.c:1126 +msgid "Floppy can be removed now" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Both Control keys simultaneously" +#: ../../standalone/drakTermServ_.c:1129 +msgid "No floppy drive available!" msgstr "" -#: ../../standalone/drakhelp:1 +#: ../../standalone/drakTermServ_.c:1138 #, c-format -msgid "" -" --help - display this help \n" -"" +msgid "Etherboot ISO image is %s" msgstr "" -#: ../../standalone.pm:1 -#, c-format -msgid "" -"[OPTION]...\n" -" --no-confirmation don't ask first confirmation question in MandrakeUpdate mode\n" -" --no-verify-rpm don't verify packages signatures\n" -" --changelog-first display changelog before filelist in the description window\n" -" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" +#: ../../standalone/drakTermServ_.c:1140 +msgid "Something went wrong! - Is mkisofs installed?" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Setting Default Printer..." +#: ../../standalone/drakTermServ_.c:1159 +msgid "Need to create /etc/dhcpd.conf first!" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s (using module %s)" +#: ../../standalone/drakTermServ_.c:1451 +msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "Generating preview ..." +#: ../../standalone/drakautoinst_.c:40 +msgid "Error!" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakautoinst_.c:41 #, c-format -msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)." +msgid "I can't find needed image file `%s'." msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "ignore" +#: ../../standalone/drakautoinst_.c:43 +msgid "Auto Install Configurator" msgstr "" -#: ../../security/help.pm:1 -#, c-format +#: ../../standalone/drakautoinst_.c:44 msgid "" -"Allow/Forbid X connections:\n" +"You are about to configure an Auto Install floppy. This feature is somewhat " +"dangerous and must be used circumspectly.\n" "\n" -"- ALL (all connections are allowed),\n" +"With that feature, you will be able to replay the installation you've " +"performed on this computer, being interactively prompted for some steps, in " +"order to change their values.\n" "\n" -"- LOCAL (only connection from local machine),\n" +"For maximum safety, the partitioning and formatting will never be performed " +"automatically, whatever you chose during the install of this computer.\n" "\n" -"- NONE (no connection)." -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on parallel port #%s" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "serial" +"Do you want to continue?" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "DVD-ROM" +#: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71 +msgid "manual" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Latin\" layout)" +#: ../../standalone/drakautoinst_.c:62 +msgid "replay" msgstr "" -#: ../advertising/09-mdksecure.pl:1 -#, c-format -msgid "Get the best items with Mandrake Linux Strategic partners" +#: ../../standalone/drakautoinst_.c:66 +msgid "Automatic Steps Configuration" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format +#: ../../standalone/drakautoinst_.c:67 msgid "" -"You may now provide options to module %s.\n" -"Note that any address should be entered with the prefix 0x like '0x123'" +"Please choose for each step whether it will replay like your install, or it " +"will be manual" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Kenya" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Use ``Unmount'' first" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Installing mtools packages..." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "You must specify a root partition" -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "first step creation" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Both Shift keys simultaneously" +#: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79 +msgid "Creating auto install floppy" msgstr "" -#: ../../standalone/drakhelp:1 -#, c-format +#: ../../standalone/drakautoinst_.c:139 msgid "" -" --id <id_label> - load the html help page which refers to id_label\n" -"" -msgstr "" - -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Do not install firmware file" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Select a scanner model" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Accept/Refuse bogus IPv4 error messages." -msgstr "" - -#: ../../printer/data.pm:1 -#, c-format -msgid "LPRng - LPR New Generation" -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Drakbackup Configuration" -msgstr "" - -#: ../../standalone/logdrake:1 -#, c-format -msgid "Save as.." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Korea (North)" -msgstr "" - -#: ../../install_gtk.pm:1 -#, c-format -msgid "System configuration" -msgstr "" - -#: ../../any.pm:1 ../../security/l10n.pm:1 -#, c-format -msgid "Autologin" +"\n" +"Welcome.\n" +"\n" +"The parameters of the auto-install are available in the sections on the left" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Domain Admin Password" +#: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504 +#: ../../standalone/scannerdrake_.c:117 +msgid "Congratulations!" msgstr "" -#: ../advertising/05-desktop.pl:1 -#, c-format -msgid "Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ..." +#: ../../standalone/drakautoinst_.c:235 +msgid "" +"The floppy has been successfully generated.\n" +"You may now replay your installation." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Configuring printer ..." +#: ../../standalone/drakautoinst_.c:273 +msgid "Auto Install" msgstr "" -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To ensure data integrity after resizing the partition(s), \n" -"filesystem checks will be run on your next boot into Windows(TM)" +#: ../../standalone/drakautoinst_.c:343 +msgid "Add an item" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "MB" +#: ../../standalone/drakautoinst_.c:350 +msgid "Remove the last item" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run some checks against the rpm database." +#: ../../standalone/drakbackup_.c:580 +msgid "Cron not available yet as non-root" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (British)" +#: ../../standalone/drakbackup_.c:690 +msgid "WARNING" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bermuda" +#: ../../standalone/drakbackup_.c:691 +msgid "FATAL" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "click here if you are sure." +#: ../../standalone/drakbackup_.c:692 +msgid "INFO" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakbackup_.c:704 msgid "" -"No configuration file found \n" -"please click Wizard or Advanced." +"\n" +" DrakBackup Report \n" +"\n" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:705 msgid "" -"Listed here are the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, since they are good for most\n" -"common installations. If you make any changes, you must at least define a\n" -"root partition (\"/\"). Do not choose too small a partition or you will not\n" -"be able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a \"/home\" partition\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" +" DrakBackup Daemon Report\n" "\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +msgstr "" + +#: ../../standalone/drakbackup_.c:709 +msgid "" "\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +" DrakBackup Report Details\n" "\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" - -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/drakups:1 -#, c-format -msgid "Remove" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Lesotho" -msgstr "" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "utopia 25" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Pipe job into a command" +#: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803 +#: ../../standalone/drakbackup_.c:859 +msgid "Total progess" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 +#: ../../standalone/drakbackup_.c:785 #, c-format -msgid "Remove system config files" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Cote d'Ivoire" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "new dynamic device name generated by core kernel devfs" -msgstr "" - -#: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../network/netconnect.pm:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Yes" -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Which protocol do you want to use?" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore Progress" +msgid "" +"%s exists, delete?\n" +"\n" +"Warning: If you've already done this process you'll probably\n" +" need to purge the entry from authorized_keys on the server." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Estonia" +#: ../../standalone/drakbackup_.c:794 +msgid "This may take a moment to generate the keys." msgstr "" -#: ../../partition_table.pm:1 +#: ../../standalone/drakbackup_.c:801 #, c-format -msgid "" -"You have a hole in your partition table but I can't use it.\n" -"The only solution is to move your primary partitions to have the hole next to the extended partitions." +msgid "ERROR: Cannot spawn %s." msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 +#: ../../standalone/drakbackup_.c:818 #, c-format -msgid "Choose the host on which the local scanners should be made available:" +msgid "No password prompt on %s at port %s" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup_.c:819 #, c-format -msgid "Channel" +msgid "Bad password on %s" msgstr "" -#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/drakups:1 +#: ../../standalone/drakbackup_.c:820 #, c-format -msgid "Add" +msgid "Permission denied transferring %s to %s" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakbackup_.c:821 #, c-format -msgid "" -" Error while sending mail. \n" -"" +msgid "Can't find %s on %s" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 +#: ../../standalone/drakbackup_.c:824 #, c-format -msgid "Keyboard" +msgid "%s not responding" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakbackup_.c:828 #, c-format msgid "" -"Insert the CD with volume label %s\n" -" in the CD drive under mount point /mnt/cdrom" +"Transfer successful\n" +"You may want to verify you can login to the server with:\n" +"\n" +"ssh -i %s %s\\@%s\n" +"\n" +"without being prompted for a password." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)." +#: ../../standalone/drakbackup_.c:873 +msgid "WebDAV remote site already in sync!" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the connection you want to configure" +#: ../../standalone/drakbackup_.c:877 +msgid "WebDAV transfer failed!" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "Please wait, setting security level..." +#: ../../standalone/drakbackup_.c:898 +msgid "No CDR/DVDR in drive!" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Configuring network device %s" +#: ../../standalone/drakbackup_.c:902 +msgid "Does not appear to be recordable media!" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "activated" +#: ../../standalone/drakbackup_.c:906 +msgid "Not erasable media!" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Please choose which network interface will be used for the dhcp server." +#: ../../standalone/drakbackup_.c:945 +msgid "This may take a moment to erase the media." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Finding packages to upgrade..." +#: ../../standalone/drakbackup_.c:1033 +msgid "Permission problem accessing CD." msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup_.c:1060 #, c-format -msgid "Mount point: " +msgid "No tape in %s!" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "parse all fonts" +#: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223 +msgid "Backup system files..." msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid direct root login." +#: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291 +msgid "Hard Disk Backup files..." msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid " Accept/Refuse broadcasted icmp echo." +#: ../../standalone/drakbackup_.c:1236 +msgid "Backup User files..." msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "With X" +#: ../../standalone/drakbackup_.c:1237 +msgid "Hard Disk Backup Progress..." msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Multi-head configuration" +#: ../../standalone/drakbackup_.c:1290 +msgid "Backup Other files..." msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "No browser available! Please install one" +#: ../../standalone/drakbackup_.c:1296 +msgid "No changes to backup!" msgstr "" -#: ../../Xconfig/main.pm:1 +#: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335 #, c-format msgid "" -"Keep the changes?\n" -"The current configuration is:\n" "\n" -"%s" -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use ReiserFS for partitions smaller than 32MB" +"Drakbackup activities via %s:\n" +"\n" msgstr "" -#: ../../services.pm:1 +#: ../../standalone/drakbackup_.c:1319 #, c-format msgid "" -"The rwho protocol lets remote users get a list of all of the users\n" -"logged into a machine running the rwho daemon (similiar to finger)." -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Domain name" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Sharing of local printers" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "Enable/Disable libsafe if libsafe is found on the system." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Available printers" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "NO" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Empty" -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "text width" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Where do you want to mount device %s?" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The default lease (in seconds)" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Sensitivity threshold" +"file list sent by FTP: %s\n" +" " msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Select the network interface to remove:" +#: ../../standalone/drakbackup_.c:1322 +msgid "" +"\n" +" FTP connection problem: It was not possible to send your backup files by " +"FTP.\n" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:1340 msgid "" -"We are now going to configure the %s connection.\n" "\n" +"Drakbackup activities via CD:\n" "\n" -"Press \"%s\" to continue." msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Interface \"%s\"" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "With basic documentation (recommended!)" -msgstr "" - -#: ../../mouse.pm:1 ../../mouse.pm:1 -#, c-format -msgid "1 button" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:1345 msgid "" "\n" -"There are %d unknown printers directly connected to your system" -msgstr "" - -#: ../../Xconfig/main.pm:1 -#, c-format -msgid "Test" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Korea" -msgstr "" - -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (default `%s'%s) " -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "official vendor name of the cpu" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Useless without Terminal Server" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Vendor" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure mouse" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the mount points" -msgstr "" - -#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 -#, c-format -msgid "OK" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Yugoslavian (latin)" -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Installing" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan with Wheel emulation" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Launch userdrake" +"Drakbackup activities via tape:\n" +"\n" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Is this an install or an upgrade?" +#: ../../standalone/drakbackup_.c:1354 +msgid " Error during mail sending. \n" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "ISDN card" +#: ../../standalone/drakbackup_.c:1380 +msgid "Can't create catalog!" msgstr "" -#: ../advertising/02-community.pl:1 -#, c-format -msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \"Community\" webpages." +#: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501 +#: ../../standalone/drakfont_.c:946 +msgid "File Selection" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\t-Hard drive.\n" -"" +#: ../../standalone/drakbackup_.c:1529 +msgid "Select the files or directories and click on 'Add'" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:1573 msgid "" -"This step is activated only if an old GNU/Linux partition has been found on\n" -"your machine.\n" -"\n" -"DrakX now needs to know if you want to perform a new install or an upgrade\n" -"of an existing Mandrake Linux system:\n" -"\n" -" * \"%s\": For the most part, this completely wipes out the old system. If\n" -"you wish to change how your hard drives are partitioned, or change the file\n" -"system, you should use this option. However, depending on your partitioning\n" -"scheme, you can prevent some of your existing data from being over-written.\n" "\n" -" * \"%s\": this installation class allows you to update the packages\n" -"currently installed on your Mandrake Linux system. Your current\n" -"partitioning scheme and user data is not altered. Most of other\n" -"configuration steps remain available, similar to a standard installation.\n" -"\n" -"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" -"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" -"to Mandrake Linux version \"8.1\" is not recommended." +"Please check all options that you need.\n" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format +#: ../../standalone/drakbackup_.c:1574 msgid "" -"\n" -" Copyright (C) 2001-2002 by MandrakeSoft \n" -" DUPONT Sebastien (original version)\n" -" CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n" -"\n" -" This program is free software; you can redistribute it and/or modify\n" -" it under the terms of the GNU General Public License as published by\n" -" the Free Software Foundation; either version 2, or (at your option)\n" -" any later version.\n" -"\n" -" This program is distributed in the hope that it will be useful,\n" -" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -" GNU General Public License for more details.\n" -"\n" -" You should have received a copy of the GNU General Public License\n" -" along with this program; if not, write to the Free Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"\n" -" Thanks:\n" -" - pfm2afm: \n" -"\t by Ken Borgendale:\n" -"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" -" - type1inst:\n" -"\t by James Macnicol: \n" -"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" -" - ttf2pt1: \n" -"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" -" Convert ttf font files to afm and pfb fonts\n" -"" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on remote CUPS server" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." -msgstr "" - -#: ../../standalone/drakfont:1 -#, c-format -msgid "here if no." -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "DHCP host name" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "The maximum lease (in seconds)" +"These options can backup and restore all files in your /etc directory.\n" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 -#, c-format -msgid "Please choose which serial port your mouse is connected to." +#: ../../standalone/drakbackup_.c:1575 +msgid "Backup your System files. (/etc directory)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Did it work properly?" +#: ../../standalone/drakbackup_.c:1576 +msgid "Use incremental backup (do not replace old backups)" msgstr "" -#: ../../fs.pm:1 -#, c-format -msgid "Mount the file system read-only." +#: ../../standalone/drakbackup_.c:1577 +msgid "Do not include critical files (passwd, group, fstab)" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "Poor" +#: ../../standalone/drakbackup_.c:1578 +msgid "" +"With this option you will be able to restore any version\n" +" of your /etc directory." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Report check result by mail" +#: ../../standalone/drakbackup_.c:1595 +msgid "Please check all users that you want to include in your backup." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Grenada" +#: ../../standalone/drakbackup_.c:1622 +msgid "Do not include the browser cache" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP start range" +#: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647 +msgid "Use Incremental Backups (do not replace old backups)" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Unsafe" +#: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000 +msgid "Remove Selected" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "SSH server" +#: ../../standalone/drakbackup_.c:1679 +msgid "Windows (FAT32)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid ", %s sectors" +#: ../../standalone/drakbackup_.c:1714 +msgid "Users" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../network/netconnect.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "No" +#: ../../standalone/drakbackup_.c:1740 +msgid "Use network connection to backup" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Guadeloupe" +#: ../../standalone/drakbackup_.c:1742 +msgid "Net Method:" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Kannada" +#: ../../standalone/drakbackup_.c:1746 +msgid "Use Expect for SSH" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format +#: ../../standalone/drakbackup_.c:1747 msgid "" -"could not find any font.\n" -"" -msgstr "" - -#: ../../standalone/drakups:1 ../../standalone/drakups:1 -#, c-format -msgid "UPS driver configuration" -msgstr "" - -#: ../../standalone/keyboarddrake:1 -#, c-format -msgid "Do you want the BackSpace to return Delete in console?" -msgstr "" - -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Vertical refresh rate" +"Create/Transfer\n" +"backup keys for SSH" msgstr "" -#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:1748 msgid "" -"Entering step `%s'\n" -"" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Niger" +" Transfer \n" +"Now" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech MouseMan" +#: ../../standalone/drakbackup_.c:1749 +msgid "" +"Other (not drakbackup)\n" +"keys in place already" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing %s ..." +#: ../../standalone/drakbackup_.c:1753 +msgid "Please enter the host name or IP." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No printer" +#: ../../standalone/drakbackup_.c:1758 +msgid "" +"Please enter the directory (or module) to\n" +" put the backup on this host." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "NetWare Printer Options" +#: ../../standalone/drakbackup_.c:1763 +msgid "Please enter your login" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "%s BootSplash (%s) preview" +#: ../../standalone/drakbackup_.c:1768 +msgid "Please enter your password" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "February" +#: ../../standalone/drakbackup_.c:1774 +msgid "Remember this password" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "General" +#: ../../standalone/drakbackup_.c:1785 +msgid "Need hostname, username and password!" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Add a user" +#: ../../standalone/drakbackup_.c:1879 +msgid "Use CD/DVDROM to backup" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "/etc/issue* exist" +#: ../../standalone/drakbackup_.c:1882 +msgid "" +"Please choose your CD/DVD device\n" +"(Press Enter to propogate settings to other fields.\n" +"This field isn't necessary, only a tool to fill in the form.)" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Network configuration (%d adapters)" +#: ../../standalone/drakbackup_.c:1887 +msgid "Please choose your CD/DVD media size (Mb)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "April" +#: ../../standalone/drakbackup_.c:1893 +msgid "Please check for multisession CD" msgstr "" -#: ../../scanner.pm:1 -#, c-format -msgid "Could not create directory /usr/share/sane/firmware!" +#: ../../standalone/drakbackup_.c:1899 +msgid "Please check if you are using CDRW media" msgstr "" -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 -#, c-format -msgid "Mandatory package %s is missing" +#: ../../standalone/drakbackup_.c:1905 +msgid "Please check if you want to erase your RW media (1st Session)" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Deactivate now" +#: ../../standalone/drakbackup_.c:1906 +msgid " Erase Now " msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Philippines" +#: ../../standalone/drakbackup_.c:1912 +msgid "Please check if you are using a DVDR device" msgstr "" -#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakclock:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Ok" +#: ../../standalone/drakbackup_.c:1918 +msgid "Please check if you are using a DVDRAM device" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "drakTermServ Overview" +#: ../../standalone/drakbackup_.c:1931 +msgid "" +"Please enter your CD Writer device name\n" +" ex: 0,1,0" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print Queue Name" +#: ../../standalone/drakbackup_.c:1964 +msgid "No CD device defined!" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Do you want to use aboot?" +#: ../../standalone/drakbackup_.c:2012 +msgid "Use tape to backup" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Belarusian" +#: ../../standalone/drakbackup_.c:2015 +msgid "Please enter the device name to use for backup" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n" -"" +#: ../../standalone/drakbackup_.c:2021 +msgid "Please check if you want to use the non-rewinding device." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Move files to the new partition" +#: ../../standalone/drakbackup_.c:2027 +msgid "Please check if you want to erase your tape before the backup." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network." +#: ../../standalone/drakbackup_.c:2033 +msgid "Please check if you want to eject your tape after the backup." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112 +#: ../../standalone/drakbackup_.c:3068 msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this computer.\n" -"\n" -"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Pitcairn" +"Please enter the maximum size\n" +" allowed for Drakbackup" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "The port on which is connected your ups" +#: ../../standalone/drakbackup_.c:2103 +msgid "Please enter the directory to save to:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore From Catalog" +#: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074 +msgid "Use quota for backup files." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "IDE" +#: ../../standalone/drakbackup_.c:2180 +msgid "Network" msgstr "" -#: ../../fs.pm:1 ../../fs.pm:1 -#, c-format -msgid "mounting partition %s in directory %s failed" +#: ../../standalone/drakbackup_.c:2185 +msgid "CDROM / DVDROM" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo screen" +#: ../../standalone/drakbackup_.c:2190 +msgid "HardDrive / NFS" msgstr "" -#: ../../bootloader.pm:1 ../../help.pm:1 -#, c-format -msgid "LILO with graphical menu" +#: ../../standalone/drakbackup_.c:2195 +msgid "Tape" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Estimating" +#: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212 +#: ../../standalone/drakbackup_.c:2216 +msgid "hourly" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It is already installed" +#: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213 +#: ../../standalone/drakbackup_.c:2216 +msgid "daily" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on SMB/Windows server \"%s\"" +#: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214 +#: ../../standalone/drakbackup_.c:2216 +msgid "weekly" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Go on anyway?" +#: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215 +#: ../../standalone/drakbackup_.c:2216 +msgid "monthly" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages and rebuilding rpm database..." +#: ../../standalone/drakbackup_.c:2229 +msgid "Use daemon" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakbackup_.c:2234 msgid "" -"\n" -" DrakBackup Report \n" -"" +"Please choose the time \n" +"interval between each backup" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Does not appear to be recordable media!" -msgstr "" - -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Specify options" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Vanuatu" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakbackup_.c:2240 msgid "" -"New user list:\n" -"" +"Please choose the\n" +"media for backup." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Either the server name or the server's IP must be given!" -msgstr "" - -#: ../../any.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2247 msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to install\n" -"SILO on your system, or another operating system removes SILO, or SILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used with\n" -"the Mandrake rescue image, making it much easier to recover from severe system\n" -"failures.\n" +"Please be sure that the cron daemon is included in your services. \n" "\n" -"If you want to create a bootdisk for your system, insert a floppy in the first\n" -"drive and press \"Ok\"." -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use an encrypted file system for mount point %s" +"Note that currently all 'net' medias also use the hard drive." msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Set the password history length to prevent password reuse." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Norfolk Island" +#: ../../standalone/drakbackup_.c:2283 +msgid "Send mail report after each backup to:" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Theme installation failed!" +#: ../../standalone/drakbackup_.c:2289 +msgid "Delete Hard Drive tar files after backup to other media." msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "Nothing to do" +#: ../../standalone/drakbackup_.c:2324 +msgid "What" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Use for loopback" +#: ../../standalone/drakbackup_.c:2329 +msgid "Where" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Bug Report Tool" +#: ../../standalone/drakbackup_.c:2334 +msgid "When" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Apply filter" +#: ../../standalone/drakbackup_.c:2339 +msgid "More Options" msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "use pppoe" +#: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444 +msgid "Drakbackup Configuration" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving files to the new partition" +#: ../../standalone/drakbackup_.c:2376 +msgid "Please choose where you want to backup" msgstr "" -#: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 -#, c-format -msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" +#: ../../standalone/drakbackup_.c:2378 +msgid "on Hard Drive" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../interactive.pm:1 -#, c-format -msgid "Advanced" +#: ../../standalone/drakbackup_.c:2388 +msgid "across Network" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer" +#: ../../standalone/drakbackup_.c:2398 +msgid "on CDROM" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (Swedish)" +#: ../../standalone/drakbackup_.c:2406 +msgid "on Tape Device" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Afghanistan" +#: ../../standalone/drakbackup_.c:2449 +msgid "Please choose what you want to backup" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "More Options" +#: ../../standalone/drakbackup_.c:2450 +msgid "Backup system" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Delete Hard Drive tar files after backup to other media." +#: ../../standalone/drakbackup_.c:2451 +msgid "Backup Users" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Burundi" +#: ../../standalone/drakbackup_.c:2454 +msgid "Select user manually" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2537 msgid "" -"cron is a standard UNIX program that runs user-specified programs\n" -"at periodic scheduled times. vixie cron adds a number of features to the basic\n" -"UNIX cron, including better security and more powerful configuration options." -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add Client -->" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Read carefully!" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "RW" +"\n" +"Backup Sources: \n" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format +#: ../../standalone/drakbackup_.c:2538 msgid "" -"Please,\n" -"type in your tv norm and country" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "RTS/CTS" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakups:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Port" -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "No (experts only)" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "No kernel selected!" -msgstr "" - -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Press enter to boot the selected OS, 'e' to edit the" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Set-GID" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "The encryption keys do not match" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup." -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "USB printer" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Right \"Windows\" key" -msgstr "" - -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Detect USB key again" -msgstr "" - -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check empty password in /etc/shadow." +"\n" +"- System Files:\n" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2540 msgid "" -"Before continuing, you should carefully read the terms of the license. It\n" -"covers the entire Mandrake Linux distribution. If you do agree with all the\n" -"terms in it, check the \"%s\" box. If not, simply turn off your computer." +"\n" +"- User Files:\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2542 msgid "" -"Here is a list of the available printing options for the current printer:\n" "\n" -"" -msgstr "" - -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "Resolutions" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on." +"- Other Files:\n" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../standalone/drakbackup_.c:2544 #, c-format msgid "" -"drakfirewall configurator\n" "\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful and dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Please enter your username, password and domain name to access this host." -msgstr "" - -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Remove selected host" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/Autodetect _jaz drives" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "No sharing" +"- Save on Hard drive on path: %s\n" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Move selected rule down one level" +#: ../../standalone/drakbackup_.c:2547 +msgid "" +"\n" +"- Delete hard drive tar files after backup.\n" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "TB" +#: ../../standalone/drakbackup_.c:2553 +msgid "" +"\n" +"- Burn to CD" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "FATAL" +#: ../../standalone/drakbackup_.c:2554 +msgid "RW" msgstr "" -#: ../../standalone/printerdrake:1 +#: ../../standalone/drakbackup_.c:2555 #, c-format -msgid "Refresh the list" +msgid " on device: %s" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client %s:\n" -" \tThrough clusternfs, each diskless client can have its own unique configuration files\n" -" \ton the root filesystem of the server. By allowing local client hardware configuration, \n" -" \tdrakTermServ will help create these files." +#: ../../standalone/drakbackup_.c:2556 +msgid " (multi-session)" msgstr "" -#: ../../standalone/drakpxe:1 +#: ../../standalone/drakbackup_.c:2557 #, c-format msgid "" -"The DHCP server will allow other computer to boot using PXE in the given range of address.\n" -"\n" -"The network address is %s using a netmask of %s.\n" "\n" -"" +"- Save to Tape on device: %s" msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../standalone/drakperm:1 ../../standalone/printerdrake:1 +#: ../../standalone/drakbackup_.c:2558 #, c-format -msgid "Delete" +msgid "\t\tErase=%s" msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../standalone/drakbackup_.c:2561 #, c-format msgid "" -"I can setup your computer to automatically start the graphical interface (XFree) upon booting.\n" -"Would you like XFree to start when you reboot?" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Build the disk" +"\n" +"- Save via %s on host: %s\n" msgstr "" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakbackup_.c:2562 #, c-format -msgid "Disconnect %s" +msgid "" +"\t\t user name: %s\n" +"\t\t on path: %s \n" msgstr "" -#: ../../standalone/drakups:1 -#, c-format +#: ../../standalone/drakbackup_.c:2563 msgid "" -"Welcome to the UPS configuration utility.\n" "\n" -"Here, you'll be add a new UPS to your system.\n" -"" +"- Options:\n" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Status:" +#: ../../standalone/drakbackup_.c:2564 +msgid "\tDo not include System Files\n" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "HTTP proxy" +#: ../../standalone/drakbackup_.c:2567 +msgid "\tBackups use tar and bzip2\n" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "SSH Server" +#: ../../standalone/drakbackup_.c:2569 +msgid "\tBackups use tar and gzip\n" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakbackup_.c:2572 #, c-format msgid "" -"\t-Network by rsync.\n" -"" -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "European protocol" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", printer \"%s\" on server \"%s\"" +"\n" +"- Daemon (%s) include:\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Note that currently all 'net' media also use the hard drive." +#: ../../standalone/drakbackup_.c:2573 +msgid "\t-Hard drive.\n" msgstr "" -#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps.pm:1 ../../wizards.pm:1 ../../wizards.pm:1 ../../wizards.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../standalone/drakauth:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/draksplash:1 ../../standalone/logdrake:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/tree/mdk_totem:1 -#, c-format -msgid "Error" +#: ../../standalone/drakbackup_.c:2574 +msgid "\t-CDROM.\n" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "allow \"su\"" +#: ../../standalone/drakbackup_.c:2575 +msgid "\t-Tape \n" msgstr "" -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Australia" +#: ../../standalone/drakbackup_.c:2576 +msgid "\t-Network by FTP.\n" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "please wait during ttmkfdir..." +#: ../../standalone/drakbackup_.c:2577 +msgid "\t-Network by SSH.\n" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure only card \"%s\"%s" +#: ../../standalone/drakbackup_.c:2578 +msgid "\t-Network by rsync.\n" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Level" +#: ../../standalone/drakbackup_.c:2579 +msgid "\t-Network by webdav.\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Change the printing system" +#: ../../standalone/drakbackup_.c:2581 +msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:2587 msgid "" -"Your system supports multiple head configuration.\n" -"What do you want to do?" -msgstr "" - -#: ../../partition_table.pm:1 -#, c-format -msgid "mount failed: " -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Configure services" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Broadcast Address:" +"List of data to restore:\n" +"\n" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu." +#: ../../standalone/drakbackup_.c:2754 +msgid "" +"List of data corrupted:\n" +"\n" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Image" +#: ../../standalone/drakbackup_.c:2756 +msgid "Please uncheck or remove it on next time." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Remote Administration" +#: ../../standalone/drakbackup_.c:2766 +msgid "Backup files are corrupted" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." +#: ../../standalone/drakbackup_.c:2787 +msgid " All of your selected data have been " msgstr "" -#: ../../modules.pm:1 +#: ../../standalone/drakbackup_.c:2788 #, c-format -msgid "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." +msgid " Successfuly Restored on %s " msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Selected All" +#: ../../standalone/drakbackup_.c:2906 +msgid " Restore Configuration " msgstr "" -#: ../../printer/data.pm:1 -#, c-format -msgid "CUPS - Common Unix Printing System" +#: ../../standalone/drakbackup_.c:2924 +msgid "OK to restore the other files." msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Webmin Service" +#: ../../standalone/drakbackup_.c:2941 +msgid "User list to restore (only the most recent date per user is important)" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "device" +#: ../../standalone/drakbackup_.c:3019 +msgid "Backup the system files before:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Enter the directory to save to:" +#: ../../standalone/drakbackup_.c:3021 +msgid "please choose the date to restore" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Greece" +#: ../../standalone/drakbackup_.c:3057 +msgid "Use Hard Disk to backup" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "All" +#: ../../standalone/drakbackup_.c:3060 +msgid "Please enter the directory to save:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printing system (spooler) do you want to use?" +#: ../../standalone/drakbackup_.c:3103 +msgid "FTP Connection" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "July" +#: ../../standalone/drakbackup_.c:3110 +msgid "Secure Connection" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Prints into %s" +#: ../../standalone/drakbackup_.c:3134 +msgid "Restore from Hard Disk." msgstr "" -#: ../../install_steps_interactive.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "An error occurred" +#: ../../standalone/drakbackup_.c:3136 +msgid "Please enter the directory where backups are stored" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "" -"This package must be upgraded.\n" -"Are you sure you want to deselect it?" +#: ../../standalone/drakbackup_.c:3204 +msgid "Select another media to restore from" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Tamil (Typewriter-layout)" +#: ../../standalone/drakbackup_.c:3206 +msgid "Other Media" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Use password to authenticate users." +#: ../../standalone/drakbackup_.c:3211 +msgid "Restore system" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)." +#: ../../standalone/drakbackup_.c:3212 +msgid "Restore Users" msgstr "" -#: ../../standalone/drakautoinst:1 ../../standalone/drakautoinst:1 -#, c-format -msgid "manual" +#: ../../standalone/drakbackup_.c:3213 +msgid "Restore Other" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Filename text to search for:" +#: ../../standalone/drakbackup_.c:3215 +msgid "select path to restore (instead of /)" msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "Reset" +#: ../../standalone/drakbackup_.c:3219 +msgid "Do new backup before restore (only for incremental backups.)" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer manufacturer, model, driver" +#: ../../standalone/drakbackup_.c:3221 +msgid "Remove user directories before restore." msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format +#: ../../standalone/drakbackup_.c:3334 msgid "" -"There is no medium or it is write-protected for device %s.\n" -"Please insert one." +"Restore Selected\n" +"Catalog Entry" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:3344 msgid "" -"Directory %s already contains data\n" -"(%s)" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Printer on NetWare server" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Give the ram size in MB" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Friday" -msgstr "" - -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Disconnection from Internet complete." -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Autodetection" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Real name" -msgstr "" - -#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 -#, c-format -msgid "done" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please uncheck or remove it on next time." -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "Higher" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the partitions you want to format" +"Restore Selected\n" +"Files" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format +#: ../../standalone/drakbackup_.c:3361 msgid "" -"No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't find %s on %s" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Japanese 106 keys" -msgstr "" - -#: ../../scanner.pm:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Could not install the packages needed to share your scanner(s)." -msgstr "" - -#: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 -#, c-format -msgid "This will take a few minutes." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Burkina Faso" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "June" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Use scanners on remote computers" -msgstr "" - -#: ../../standalone/drakperm:1 -#, c-format -msgid "Delete selected rule" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Accessing printers on remote CUPS servers" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Insert a floppy in %s" +"Change\n" +"Restore Path" msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup_.c:3427 #, c-format -msgid "Maldives" +msgid "Backup files not found at %s." msgstr "" -#: ../../any.pm:1 +#: ../../standalone/drakbackup_.c:3440 #, c-format -msgid "compact" +msgid "" +"Insert the CD with volume label %s\n" +" in the CD drive under mount point /mnt/cdrom" msgstr "" -#: ../../common.pm:1 -#, c-format -msgid "1 minute" +#: ../../standalone/drakbackup_.c:3440 +msgid "Restore From CD" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup_.c:3442 #, c-format -msgid "type: fat" +msgid "Not the correct CD label. Disk is labelled %s." msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup_.c:3452 #, c-format msgid "" -"on channel %d id %d\n" -"" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Laos" +"Insert the tape with volume label %s\n" +" in the tape drive device %s" msgstr "" -#: ../advertising/04-configuration.pl:1 -#, c-format -msgid "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!" +#: ../../standalone/drakbackup_.c:3452 +msgid "Restore From Tape" msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/drakbackup_.c:3454 #, c-format -msgid "Activate/Disable ethernet cards promiscuity check." +msgid "Not the correct tape label. Tape is labelled %s." msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Congratulations, the \"%s\" network interface has been succesfully deleted" +#: ../../standalone/drakbackup_.c:3474 +msgid "Restore Via Network" msgstr "" -#: ../../install_interactive.pm:1 +#: ../../standalone/drakbackup_.c:3474 #, c-format -msgid "There is no FAT partition to resize (or not enough space left)" +msgid "Restore Via Network Protocol: %s" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Up" +#: ../../standalone/drakbackup_.c:3475 +msgid "Host Name" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Firewall" +#: ../../standalone/drakbackup_.c:3476 +msgid "Host Path or Module" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Area:" +#: ../../standalone/drakbackup_.c:3483 +msgid "Password required" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "(E)IDE/ATA controllers" +#: ../../standalone/drakbackup_.c:3489 +msgid "Username required" msgstr "" -#: ../../fs.pm:1 -#, c-format -msgid "All I/O to the file system should be done synchronously." +#: ../../standalone/drakbackup_.c:3492 +msgid "Hostname required" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer Server" +#: ../../standalone/drakbackup_.c:3497 +msgid "Path or Module required" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Custom configuration" +#: ../../standalone/drakbackup_.c:3510 +msgid "Files Restored..." msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed." +#: ../../standalone/drakbackup_.c:3513 +msgid "Restore Failed..." msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "" -"Please indicate where the installation image will be available.\n" -"\n" -"If you do not have an existing directory, please copy the CD or DVD contents.\n" -"\n" -"" +#: ../../standalone/drakbackup_.c:3751 +msgid "Restore all backups" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Saint Pierre and Miquelon" +#: ../../standalone/drakbackup_.c:3760 +msgid "Custom Restore" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "September" +#: ../../standalone/drakbackup_.c:3804 +msgid "CD in place - continue." msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "saving Bootsplash theme..." +#: ../../standalone/drakbackup_.c:3810 +msgid "Browse to new restore repository." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Portugal" +#: ../../standalone/drakbackup_.c:3813 +msgid "Restore From Catalog" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Do you have another one?" +#: ../../standalone/drakbackup_.c:3841 +msgid "Restore Progress" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid ", printing to %s" +#: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916 +#: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969 +#: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056 +#: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113 +#: ../../standalone/drakbackup_.c:4139 +msgid "Previous" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Assign host name from DHCP address" +#: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973 +#: ../../standalone/logdrake_.c:203 +msgid "Save" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to normal mode" +#: ../../standalone/drakbackup_.c:3946 +msgid "Build Backup" msgstr "" -#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Generic" +#: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544 +msgid "Restore" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4189 msgid "" -"Cylinder %d to %d\n" -"" -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "YOUR TEXT HERE" -msgstr "" - -#: ../../modules/interactive.pm:1 ../../standalone/draksec:1 -#, c-format -msgid "NONE" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which disk do you want to move it to?" -msgstr "" - -#: ../../standalone/draksplash:1 -#, c-format -msgid "Display logo on Console" -msgstr "" - -#: ../../any.pm:1 ../../any.pm:1 -#, c-format -msgid "Windows Domain" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Saami (norwegian)" -msgstr "" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "Interface %s (on network %s)" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "INFO" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Wallis and Futuna" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Need to create /etc/dhcpd.conf first!" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Is FPU present" +"Error during sendmail.\n" +" Your report mail was not sent.\n" +" Please configure sendmail" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4195 msgid "" -"No additional information\n" -"about this service, sorry." +"Error during sending file via FTP.\n" +" Please correct your FTP configuration." msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format +#: ../../standalone/drakbackup_.c:4209 msgid "" -"There are no scanners found which are available on your system.\n" -"" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build Single NIC -->" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Marshall Islands" -msgstr "" - -#: ../../ugtk2.pm:1 -#, c-format -msgid "Is this correct?" -msgstr "" - -#: ../../steps.pm:1 -#, c-format -msgid "Root password" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Windows (FAT32)" +"The following packages need to be installed:\n" +" @list_of_rpm_to_install" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Build All Kernels -->" +#: ../../standalone/drakbackup_.c:4232 +msgid "Please select data to restore..." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "DVDRAM device" +#: ../../standalone/drakbackup_.c:4267 +msgid "Please select media for backup..." msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, report unowned files." +#: ../../standalone/drakbackup_.c:4275 +msgid "Please select data to backup..." msgstr "" -#: ../../install_interactive.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304 msgid "" -"You don't have a swap partition.\n" -"\n" -"Continue anyway?" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Version: " -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Server IP missing!" +"No configuration file found \n" +"please click Wizard or Advanced." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Suriname" +#: ../../standalone/drakbackup_.c:4308 +msgid "Under Devel ... please wait." msgstr "" -#: ../../network/adsl.pm:1 -#, c-format -msgid "Use a floppy" +#: ../../standalone/drakbackup_.c:4382 +msgid "Backup system files" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Enable ACPI" +#: ../../standalone/drakbackup_.c:4384 +msgid "Backup user files" msgstr "" -#: ../../fs.pm:1 -#, c-format -msgid "Give write access to ordinary users" +#: ../../standalone/drakbackup_.c:4386 +msgid "Backup other files" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Graphical Environment" +#: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421 +msgid "Total Progress" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Gibraltar" +#: ../../standalone/drakbackup_.c:4412 +msgid "files sending by FTP" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Do nothing" +#: ../../standalone/drakbackup_.c:4416 +msgid "Sending files..." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Delete Client" +#: ../../standalone/drakbackup_.c:4500 +msgid "Backup Now from configuration file" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Filesystem type: " +#: ../../standalone/drakbackup_.c:4505 +msgid "View Backup Configuration." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Starting network..." +#: ../../standalone/drakbackup_.c:4526 +msgid "Wizard Configuration" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Vietnam" +#: ../../standalone/drakbackup_.c:4531 +msgid "Advanced Configuration" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "/_Fields description" +#: ../../standalone/drakbackup_.c:4536 +msgid "Backup Now" msgstr "" -#: ../advertising/10-security.pl:1 -#, c-format -msgid "Optimize your security by using Mandrake Linux" +#: ../../standalone/drakbackup_.c:4576 +msgid "Drakbackup" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format +#: ../../standalone/drakbackup_.c:4624 msgid "" +"options description:\n" "\n" +" In this step Drakbackup allow you to change:\n" "\n" -" Thanks:\n" -"\t- LTSP Project http://www.ltsp.org\n" -"\t- Michael Brown <mbrown@fensystems.co.uk>\n" +" - The compression mode:\n" +" \n" +" If you check bzip2 compression, you will compress\n" +" your data better than gzip (about 2-10 %).\n" +" This option is not checked by default because\n" +" this compression mode needs more time (about 1000% more).\n" +" \n" +" - The update mode:\n" +"\n" +" This option will update your backup, but this\n" +" option is not really useful because you need to\n" +" decompress your backup before you can update it.\n" +" \n" +" - the .backupignore mode:\n" +"\n" +" Like with cvs, Drakbackup will ignore all references\n" +" included in .backupignore files in each directories.\n" +" ex: \n" +" /*> cat .backupignore*/\n" +" *.o\n" +" *~\n" +" ...\n" +" \n" "\n" -"" -msgstr "" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakfont:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/drakups:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Help" -msgstr "" - -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check if the network devices are in promiscuous mode" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4654 msgid "" -"Iwspy is used to set a list of addresses in a wireless network\n" -"interface and to read back quality of link information for each of those.\n" "\n" -"This information is the same as the one available in /proc/net/wireless :\n" -"quality of the link, signal strength and noise level.\n" +" Some errors during sendmail are caused by \n" +" a bad configuration of postfix. To solve it you have to\n" +" set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" -"See iwpspy(8) man page for further information." msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Your personal phone number" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which size do you want to keep for Windows on" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4662 msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -"" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Username required" -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Device" +"options description:\n" +"\n" +" - Backup system files:\n" +" \n" +"\tThis option allows you to backup your /etc directory,\n" +"\twhich contains all configuration files. Please be\n" +"\tcareful during the restore step to not overwrite:\n" +"\t\t/etc/passwd \n" +"\t\t/etc/group \n" +"\t\t/etc/fstab\n" +"\n" +" - Backup User files: \n" +"\n" +"\tThis option allows you select all users that you want \n" +"\tto backup.\n" +"\tTo preserve disk space, it is recommended that you \n" +"\tdo not include web browser's cache.\n" +"\n" +" - Backup Other files: \n" +"\n" +"\tThis option allows you to add more data to save.\n" +"\tWith the other backup it's not possible at the \n" +"\tmoment to select incremental backup.\t\t\n" +" \n" +" - Incremental Backups:\n" +"\n" +"\tThe incremental backup is the most powerful \n" +"\toption for backup. This option allows you \n" +"\tto backup all your data the first time, and \n" +"\tonly the changed afterward.\n" +"\tThen you will be able, during the restore\n" +"\tstep, to restore your data from a specified\n" +"\tdate.\n" +"\tIf you have not selected this option all\n" +"\told backups are deleted before each backup. \n" +"\n" +"\n" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4701 msgid "" -"Depending on the default language you chose in Section , DrakX will\n" -"automatically select a particular type of keyboard configuration. However,\n" -"you may not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may have a Swiss\n" -"keyboard. Or if you speak English but are located in Quebec, you may find\n" -"yourself in the same situation where your native language and keyboard do\n" -"not match. In either case, this installation step will allow you to select\n" -"an appropriate keyboard from a list.\n" +"restore description:\n" +" \n" +"Only the most recent date will be used, because with incremental \n" +"backups it is necessary to restore one by one each older backup.\n" +"\n" +"So if you don't want to restore a user please unselect all their\n" +"check boxes.\n" +"\n" +"Otherwise, you are able to select only one of these.\n" +"\n" +" - Incremental Backups:\n" +"\n" +"\tThe incremental backup is the most powerful \n" +"\toption to use. This option allows you to \n" +"\tbackup all of your data the first time, and \n" +"\tonly the changed data after.\n" +"\tSo you will be able, during the restore\n" +"\tstep, to restore your data from a specified\n" +"\tdate.\n" +"\tIf you have not selected this option all\n" +"\told backups are deleted before each backup. \n" +"\n" "\n" -"Click on the \"%s\" button to be presented with the complete list of\n" -"supported keyboards.\n" "\n" -"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" -"dialog will allow you to choose the key binding that will switch the\n" -"keyboard between the Latin and non-Latin layouts." -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB (Windows 9x/NT) Printer Options" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "URI: %s" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Valid user list changed, rewriting config file." -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "The wizard successfully configured the new \"%s\" UPS device." -msgstr "" - -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "mkinitrd optional arguments" -msgstr "" - -#: ../advertising/03-software.pl:1 -#, c-format -msgid "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org." -msgstr "" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "Protocol for the rest of the world" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print test pages" -msgstr "" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Activate now" -msgstr "" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "64 MB or more" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4727 msgid "" -"Please select the test pages you want to print.\n" -"Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page." +" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita." +"fr>" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Please select the device where your %s is attached" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format +#: ../../standalone/drakbackup_.c:4729 msgid "" -"Not formatted\n" -"" +" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "Periodic Checks" -msgstr "" - -#: ../../standalone/drakpxe:1 -#, c-format -msgid "PXE Server Configuration" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup the system files before:" -msgstr "" - -#: ../../security/level.pm:1 -#, c-format -msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "First floppy drive" -msgstr "" - -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Quit" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose the new size" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Media class" -msgstr "" - -#: ../../standalone/XFdrake:1 -#, c-format -msgid "You need to log out and back in again for changes to take effect" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is not known by this version of Scannerdrake." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Faroe Islands" +#: ../../standalone/drakbackup_.c:4732 +msgid "" +"Description:\n" +"\n" +" Drakbackup is used to backup your system.\n" +" During the configuration you can select: \n" +"\t- System files, \n" +"\t- Users files, \n" +"\t- Other files.\n" +"\tor All your system ... and Other (like Windows Partitions)\n" +"\n" +" Drakbackup allows you to backup your system on:\n" +"\t- Harddrive.\n" +"\t- NFS.\n" +"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" +"\t- FTP.\n" +"\t- Rsync.\n" +"\t- Webdav.\n" +"\t- Tape.\n" +"\n" +" Drakbackup allows you to restore your system to\n" +" a user selected directory.\n" +"\n" +" Per default all backup will be stored on your\n" +" /var/lib/drakbackup directory\n" +"\n" +" Configuration file:\n" +"\t/etc/drakconf/drakbackup/drakbakup.conf\n" +"\n" +"Restore Step:\n" +" \n" +" During the restore step, DrakBackup will remove \n" +" your original directory and verify that all \n" +" backup files are not corrupted. It is recommended \n" +" you do a last backup before restoring.\n" +"\n" +"\n" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Restart XFS" +#: ../../standalone/drakbackup_.c:4769 +msgid "" +"options description:\n" +"\n" +"Please be careful when you are using ftp backup, because only \n" +"backups that are already built are sent to the server.\n" +"So at the moment, you need to build the backup on your hard \n" +"drive before sending it to the server.\n" +"\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add host/network" +#: ../../standalone/drakbackup_.c:4778 +msgid "" +"\n" +"Restore Backup Problems:\n" +"\n" +"During the restore step, Drakbackup will verify all your\n" +"backup files before restoring them.\n" +"Before the restore, Drakbackup will remove \n" +"your original directory, and you will loose all your \n" +"data. It is important to be careful and not modify the \n" +"backup data files by hand.\n" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakboot_.c:50 #, c-format -msgid "Scannerdrake will not be started now." +msgid "Installation of %s failed. The following error occured:" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Model name" +#: ../../standalone/drakbug_.c:45 +msgid "Mandrake Bug Report Tool" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Albania" +#: ../../standalone/drakbug_.c:50 +msgid "First Time Wizard" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "British Indian Ocean Territory" +#: ../../standalone/drakbug_.c:51 +msgid "Synchronization tool" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Normal Mode" +#: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66 +#: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135 +#: ../../standalone/drakbug_.c:139 +msgid "Standalone Tools" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No CD-R/DVD-R in drive!" +#: ../../standalone/drakbug_.c:53 +msgid "HardDrake" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer connection type" +#: ../../standalone/drakbug_.c:54 +msgid "Mandrake Online" msgstr "" -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "No network adapter on your system!" +#: ../../standalone/drakbug_.c:55 +msgid "Menudrake" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Network %s" +#: ../../standalone/drakbug_.c:56 +msgid "Msec" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Malayalam" +#: ../../standalone/drakbug_.c:57 +msgid "Remote Control" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Option %s out of range!" +#: ../../standalone/drakbug_.c:58 +msgid "Software Manager" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Connect %s" +#: ../../standalone/drakbug_.c:59 +msgid "Urpmi" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Restarting CUPS..." +#: ../../standalone/drakbug_.c:60 +msgid "Windows Migration tool" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printing/Scanning/Photo Cards on \"%s\"" +#: ../../standalone/drakbug_.c:61 +msgid "Userdrake" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Continue without USB key" +#: ../../standalone/drakbug_.c:62 +msgid "Configuration Wizards" msgstr "" -#: ../../install_steps.pm:1 -#, c-format -msgid "Duplicate mount point %s" +#: ../../standalone/drakbug_.c:75 +msgid "Application:" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run chkrootkit checks." +#: ../../standalone/drakbug_.c:76 +msgid "Package: " msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Connection Configuration" +#: ../../standalone/drakbug_.c:77 +msgid "Kernel:" msgstr "" -#: ../../harddrake/v4l.pm:1 ../../harddrake/v4l.pm:1 -#, c-format -msgid "Unknown|Generic" +#: ../../standalone/drakbug_.c:78 +msgid "Release: " msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakbug_.c:93 msgid "" -"At the time you are installing Mandrake Linux, it is likely that some\n" -"packages have been updated since the initial release. Bugs may have been\n" -"fixed, security issues resolved. To allow you to benefit from these\n" -"updates, you are now able to download them from the Internet. Check \"%s\"\n" -"if you have a working Internet connection, or \"%s\" if you prefer to\n" -"install updated packages later.\n" "\n" -"Choosing \"%s\" will display a list of places from which updates can be\n" -"retrieved. You should choose one nearer to you. A package-selection tree\n" -"will appear: review the selection, and press \"%s\" to retrieve and install\n" -"the selected package(s), or \"%s\" to abort." -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "Myanmar" +"\n" +"To submit a bug report, click on the button report.\n" +"This will open a web browser window on https://drakbug.mandrakesoft.com\n" +" where you'll find a form to fill in.The information displayed above will " +"be \n" +"transferred to that server\n" +"\n" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/draksplash:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Quit" +#: ../../standalone/drakbug_.c:112 +msgid "Report" msgstr "" -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Auto allocate" +#: ../../standalone/drakbug_.c:148 +msgid "Not installed" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Check bad blocks?" +#: ../../standalone/drakbug_.c:160 +msgid "Package not installed" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Other MultiMedia devices" +#: ../../standalone/drakbug_.c:173 +msgid "connecting to Bugzilla wizard ..." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "burner" +#: ../../standalone/drakbug_.c:180 +msgid "No browser available! Please install one" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakconnect_.c:75 #, c-format -msgid "Bug Description/System Information" +msgid "Network configuration (%d adapters)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid " (Default is all users)" +#: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591 +msgid "Profile: " msgstr "" -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "No remote machines" +#: ../../standalone/drakconnect_.c:91 +msgid "Del profile..." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this computer.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." +#: ../../standalone/drakconnect_.c:97 +msgid "Profile to delete:" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Authentication NIS" +#: ../../standalone/drakconnect_.c:125 +msgid "New profile..." msgstr "" -#: ../../standalone/drakclock:1 -#, c-format +#: ../../standalone/drakconnect_.c:131 msgid "" -"We need to install ntp package\n" -" to enable Network Time Protocol\n" -"\n" -"Do you want to install ntp ?" +"Name of the profile to create (the new profile is created as a copy of the " +"current one) :" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Option ``Restrict command line options'' is of no use without a password" -msgstr "" - -#: ../../standalone/drakups:1 -#, c-format -msgid "Please select your UPS model." -msgstr "" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing currently enabled" -msgstr "" - -#: ../../lang.pm:1 -#, c-format -msgid "United Arab Emirates" +#: ../../standalone/drakconnect_.c:157 +msgid "Hostname: " msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_0" +#: ../../standalone/drakconnect_.c:164 +msgid "Internet access" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Disable Local Config" +#: ../../standalone/drakconnect_.c:177 +msgid "Type:" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Thailand" +#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 +msgid "Gateway:" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_1" +#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 +msgid "Interface:" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Search:" +#: ../../standalone/drakconnect_.c:191 +msgid "Status:" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Kazakhstan" +#: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145 +msgid "Wait please" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Routers:" +#: ../../standalone/drakconnect_.c:216 +msgid "Configure Internet Access..." msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Write" +#: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445 +msgid "LAN configuration" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Display all available remote CUPS printers" +#: ../../standalone/drakconnect_.c:228 +msgid "Driver" msgstr "" -#: ../../install_steps_newt.pm:1 -#, c-format -msgid "Mandrake Linux Installation %s" +#: ../../standalone/drakconnect_.c:228 +msgid "Interface" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "Unknown driver" +#: ../../standalone/drakconnect_.c:228 +msgid "Protocol" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Thai keyboard" +#: ../../standalone/drakconnect_.c:228 +msgid "State" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Bouvet Island" +#: ../../standalone/drakconnect_.c:240 +msgid "Configure Local Area Network..." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Dialup options" +#: ../../standalone/drakconnect_.c:252 +msgid "Click here to launch the wizard ->" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "If no port is given, 631 will be taken as default." +#: ../../standalone/drakconnect_.c:253 +msgid "Wizard..." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Per client system configuration files:\n" -" \tThrough clusternfs, each diskless client can have its own unique configuration files\n" -" \ton the root filesystem of the server. By allowing local client hardware configuration, \n" -" \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n" -" \t/etc/sysconfig/keyboard on a per-client basis.\n" -"\n" -" Note: Enabling local client hardware configuration does enable root login to the terminal \n" -" server on each client machine that has this feature enabled. Local configuration can be\n" -" turned back off, retaining the configuration files, once the client machine is configured." +#: ../../standalone/drakconnect_.c:279 +msgid "Apply" msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Change your Cd-Rom!\n" -"\n" -"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid installation from this Cd-Rom." +#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 +#: ../../standalone/net_monitor_.c:457 +msgid "Connected" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish" +#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 +#: ../../standalone/net_monitor_.c:457 +msgid "Not connected" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Online" +#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 +msgid "Connect..." msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "UPS users" +#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 +msgid "Disconnect..." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakconnect_.c:400 msgid "" -"\t-Network by webdav.\n" -"" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", multi-function device on a parallel port" -msgstr "" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool." -msgstr "" - -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakgw:1 -#, c-format -msgid "Netmask" -msgstr "" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "No hard drives found" -msgstr "" - -#: ../../mouse.pm:1 -#, c-format -msgid "2 buttons" +"Warning, another Internet connection has been detected, maybe using your " +"network" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech CC Series" +#: ../../standalone/drakconnect_.c:427 +msgid "" +"You don't have any configured interface.\n" +"Configure them first by clicking on 'Configure'" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "What kind is your ISDN connection?" +#: ../../standalone/drakconnect_.c:449 +msgid "LAN Configuration" msgstr "" -#: ../../any.pm:1 ../../any.pm:1 ../../any.pm:1 +#: ../../standalone/drakconnect_.c:460 #, c-format -msgid "Label" +msgid "Adapter %s: %s" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Save on floppy" +#: ../../standalone/drakconnect_.c:466 +msgid "Boot Protocol" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check open ports" +#: ../../standalone/drakconnect_.c:467 +msgid "Started on boot" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Edit selected printer" +#: ../../standalone/drakconnect_.c:468 +msgid "DHCP client" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer auto-detection" +#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 +msgid "activate now" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "Which of the following is your ISDN card?" +#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 +msgid "deactivate now" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../standalone/drakconnect_.c:499 msgid "" -"NFS is a popular protocol for file sharing across TCP/IP networks.\n" -"This service provides NFS server functionality, which is configured via the\n" -"/etc/exports file." -msgstr "" - -#: ../../standalone/drakbug:1 -#, c-format -msgid "Msec" +"This interface has not been configured yet.\n" +"Launch the configuration wizard in the main window" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format +#: ../../standalone/drakconnect_.c:556 msgid "" -"=> Notice, a label changed:\n" -"%s" +"You don't have any internet connection.\n" +"Create one first by clicking on 'Configure'" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Number of capture buffers:" +#: ../../standalone/drakconnect_.c:580 +msgid "Internet connection configuration" msgstr "" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "Your choice? (0/1, default `%s') " +#: ../../standalone/drakconnect_.c:584 +msgid "Internet Connection Configuration" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a file system).\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to\n" -"erase any data they contain. If you wish to do that, please select those\n" -"partitions as well.\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" -"reformat partitions containing data that you wish to keep (typically\n" -"\"/home\").\n" -"\n" -"Please be careful when selecting partitions. After formatting, all data on\n" -"the selected partitions will be deleted and you will not be able to recover\n" -"it.\n" -"\n" -"Click on \"%s\" when you are ready to format partitions.\n" -"\n" -"Click on \"%s\" if you want to choose another partition for your new\n" -"Mandrake Linux operating system installation.\n" -"\n" -"Click on \"%s\" if you wish to select partitions that will be checked for\n" -"bad blocks on the disk." +#: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94 +msgid "Connection type: " msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "French" +#: ../../standalone/drakconnect_.c:599 +msgid "Parameters" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Czech (QWERTY)" +#: ../../standalone/drakconnect_.c:618 +msgid "Gateway" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Allow X Window connections" +#: ../../standalone/drakconnect_.c:627 +msgid "Ethernet Card" msgstr "" -#: ../../standalone/service_harddrake:1 -#, c-format -msgid "Hardware probing in progress" +#: ../../standalone/drakconnect_.c:628 +msgid "DHCP Client" msgstr "" -#: ../../network/netconnect.pm:1 ../../network/shorewall.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakgw:1 -#, c-format -msgid "Net Device" +#: ../../standalone/drakfloppy_.c:39 +msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 -#, c-format -msgid "Summary" +#: ../../standalone/drakfloppy_.c:40 +msgid "Module name" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." +#: ../../standalone/drakfloppy_.c:40 +msgid "Size" msgstr "" -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Next" +#: ../../standalone/drakfloppy_.c:45 +msgid "drakfloppy" msgstr "" -#: ../../bootloader.pm:1 -#, c-format -msgid "" -"You can't install the bootloader on a %s partition\n" -"" +#: ../../standalone/drakfloppy_.c:63 +msgid "boot disk creation" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "CHAP" +#: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84 +msgid "default" msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakfloppy_.c:87 #, c-format -msgid "Puerto Rico" +msgid "DrakFloppy Error: %s" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "(bootp/dhcp/zeroconf)" +#: ../../standalone/drakfloppy_.c:98 +msgid "kernel version" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "" -"\n" -"Welcome.\n" -"\n" -"The parameters of the auto-install are available in the sections on the left" +#: ../../standalone/drakfloppy_.c:104 +msgid "General" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "" -"package 'ImageMagick' is required to be able to complete configuration.\n" -"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" +#: ../../standalone/drakfloppy_.c:109 +msgid "Expert Area" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Select firmware file" +#: ../../standalone/drakfloppy_.c:112 +msgid "mkinitrd optional arguments" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "Telnet server" +#: ../../standalone/drakfloppy_.c:113 +msgid "Add a module" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"number row\" QWERTY" +#: ../../standalone/drakfloppy_.c:133 +msgid "force" msgstr "" -#: ../../install_any.pm:1 -#, c-format -msgid "" -"The following packages will be removed to allow upgrading your system: %s\n" -"\n" -"\n" -"Do you really want to remove these packages?\n" -"" +#: ../../standalone/drakfloppy_.c:134 +msgid "if needed" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Anguilla" +#: ../../standalone/drakfloppy_.c:135 +msgid "omit scsi modules" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "NIS Domain" +#: ../../standalone/drakfloppy_.c:136 +msgid "omit raid modules" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Antarctica" +#: ../../standalone/drakfloppy_.c:172 +msgid "Remove a module" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- User Files:\n" -"" +#: ../../standalone/drakfloppy_.c:194 +msgid "Output" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Mount options" +#: ../../standalone/drakfloppy_.c:206 +msgid "Build the disk" msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakfloppy_.c:336 #, c-format -msgid "Jamaica" +msgid "Be sure a media is present for the device %s" msgstr "" -#: ../../services.pm:1 +#: ../../standalone/drakfloppy_.c:341 #, c-format msgid "" -"Assign raw devices to block devices (such as hard drive\n" -"partitions), for the use of applications such as Oracle or DVD players" -msgstr "" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Please wait, preparing installation..." +"There is no medium or it is write-protected for device %s.\n" +"Please insert one." msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 +#: ../../standalone/drakfloppy_.c:344 #, c-format -msgid "Czech (QWERTZ)" +msgid "Unable to fork: %s" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakfloppy_.c:349 #, c-format -msgid "Track network card id (useful for laptops)" +msgid "" +"Unable to close properly mkbootdisk: \n" +" %s \n" +" %s" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "The port number should be an integer!" +#: ../../standalone/drakfont_.c:213 +msgid "Search installed fonts" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "You must choose an image file first!" +#: ../../standalone/drakfont_.c:215 +msgid "Unselect fonts installed" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore from Hard Disk." +#: ../../standalone/drakfont_.c:239 +msgid "parse all fonts" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Add to LVM" +#: ../../standalone/drakfont_.c:242 +msgid "no fonts found" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "DNS server" +#: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305 +#: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454 +#: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493 +#: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532 +msgid "done" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Trinidad and Tobago" +#: ../../standalone/drakfont_.c:257 +msgid "could not find any font in your mounted partitions" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"LPD and LPRng do not support IPP printers.\n" -"" +#: ../../standalone/drakfont_.c:303 +msgid "Reselect correct fonts" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host name or IP." +#: ../../standalone/drakfont_.c:307 +msgid "could not find any font.\n" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Edit" +#: ../../standalone/drakfont_.c:331 +msgid "Search fonts in installed list" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "simple" +#: ../../standalone/drakfont_.c:359 +msgid "Fonts copy" msgstr "" -#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Clear all" +#: ../../standalone/drakfont_.c:363 +msgid "True Type fonts installation" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "No test pages" +#: ../../standalone/drakfont_.c:371 +msgid "please wait during ttmkfdir..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Falkland Islands (Malvinas)" +#: ../../standalone/drakfont_.c:377 +msgid "True Type install done" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Adapter %s: %s" +#: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413 +msgid "Fonts conversion" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Boot disk creation" +#: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417 +#: ../../standalone/drakfont_.c:450 +msgid "type1inst building" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Monday" +#: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427 +msgid "Ghostscript referencing" msgstr "" -#: ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Unknown model" +#: ../../standalone/drakfont_.c:437 +msgid "ttf fonts conversion" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check files/directories writable by everybody." +#: ../../standalone/drakfont_.c:444 +msgid "pfm fonts conversion" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "authentication" +#: ../../standalone/drakfont_.c:456 +msgid "Suppress temporary Files" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Now" +#: ../../standalone/drakfont_.c:459 +msgid "Restart XFS" msgstr "" -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/drakups:1 ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_File" +#: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526 +msgid "Suppress Fonts Files" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Removing printer from Star Office/OpenOffice.org/GIMP" +#: ../../standalone/drakfont_.c:528 +msgid "xfs restart" msgstr "" -#: ../../services.pm:1 -#, c-format +#: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902 msgid "" -"Launch packet filtering for Linux kernel 2.2 series, to set\n" -"up a firewall to protect your machine from network attacks." +"Before installing any fonts, be sure that you have the right to use and " +"install them on your system.\n" +"\n" +"-You can install the fonts using the normal way. In rare cases, bogus fonts " +"may hang up your X Server." msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Editable" +#: ../../standalone/drakfont_.c:621 +msgid "Fonts Importation" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Which dhcp client do you want to use ? (default is dhcp-client)" +#: ../../standalone/drakfont_.c:650 +msgid "Get Windows Fonts" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Tamil (ISCII-layout)" +#: ../../standalone/drakfont_.c:658 +msgid "Uninstall Fonts" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Mayotte" +#: ../../standalone/drakfont_.c:669 +msgid "Advanced Options" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Set shell commands history size. A value of -1 means unlimited." +#: ../../standalone/drakfont_.c:677 +msgid "Font List" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format +#: ../../standalone/drakfont_.c:737 msgid "" -"%d KB\n" -"" -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Creating auto install floppy..." +"\n" +" Copyright (C) 2001-2002 by MandrakeSoft \n" +"\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n" +"\n" +" This program is free software; you can redistribute it and/or modify\n" +" it under the terms of the GNU General Public License as published by\n" +" the Free Software Foundation; either version 2, or (at your option)\n" +" any later version.\n" +"\n" +" This program is distributed in the hope that it will be useful,\n" +" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +" GNU General Public License for more details.\n" +"\n" +" You should have received a copy of the GNU General Public License\n" +" along with this program; if not, write to the Free Software\n" +" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +"\n" +" Thanks:\n" +" - pfm2afm: \n" +"\t by Ken Borgendale:\n" +"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" +" - type1inst:\n" +"\t by James Macnicol: \n" +"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" +" - ttf2pt1: \n" +"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" +" Convert ttf font files to afm and pfb fonts\n" +"\n" +"\n" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for scanners ..." +#: ../../standalone/drakfont_.c:793 +msgid "" +"drakfont Future Overview\n" +" - Fonts import:\n" +" pfb ( Adobe Type 1 binary )\n" +" pfa ( Adobe Type 1 ASCII )\n" +" ttf ( True-Type )\n" +" pcf.gz\n" +" Speedo\n" +" and Bitmap (PCF, BDF, and SNF)\n" +" - Features\n" +" - Install fonts from any directory\n" +" - Get windows fonts on any vfat partitions\n" +" - Get fonts on any partitions.\n" +" - UN-installation of any fonts (even if not installed " +"through drakfont)\n" +" - Support\n" +" - Xfs\n" +" - ghostscript & printer\n" +" - Staroffice & printer\n" +" - abiword\n" +"\t - netscape\n" +" - Koffice, Gnumeric, ... studying\n" +" - all fonts supported by printer\n" +" - anti-aliases by RENDER in Xfree86 .... \n" +"\t\t\t\tsupported by KDE.\n" +"\t\t\t\twill be supported by gnome 1.2.\n" +"Visual Interface:\n" +" Window interface:\n" +" - Fontselectiondialog widget\n" +" - Command buttons under Fontselectiondialog (like the actual " +"frontend).\n" +" Commands buttons:\n" +" - import from windows partition.\n" +" import from all fat32 partitions and look for winnt/windows/" +"font\n" +" and import all (delete doublon) but don't import if already " +"exist.\n" +" - import from directory\n" +" look for if it exist before for each font and not delete the " +"original.\n" +" (replace all, no, none)\n" +" expert options:\n" +" ask the directory, and look for if it exist before\n" +" if it exist ask: (replace all, no, none)\n" +" - uninstall with list per font type\n" +" Expert additional switch\n" +" - option support: ghostscript, Staroffice, etc...\n" +" check-button. (by default all check)\n" +" - Printer Application Fonts Support...\n" +"\n" +"\n" +msgstr "" + +#: ../../standalone/drakfont_.c:862 +msgid "Choose the applications that will support the fonts:" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Russia" +#: ../../standalone/drakfont_.c:870 +msgid "Ghostscript" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Partitioning" +#: ../../standalone/drakfont_.c:877 +msgid "StarOffice" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Syslog" +#: ../../standalone/drakfont_.c:884 +msgid "Abiword" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't create catalog!" +#: ../../standalone/drakfont_.c:891 +msgid "Generic Printers" msgstr "" -#: ../advertising/11-mnf.pl:1 -#, c-format -msgid "Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager." +#: ../../standalone/drakfont_.c:958 +msgid "Select the font file or directory and click on 'Add'" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "Not enough free space for auto-allocating" +#: ../../standalone/drakfont_.c:1005 +msgid "Install List" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Set root password" +#: ../../standalone/drakfont_.c:1048 +msgid "click here if you are sure." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Enable IP spoofing protection" +#: ../../standalone/drakfont_.c:1055 +msgid "here if no." msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"." +#: ../../standalone/drakfont_.c:1112 +msgid "Unselected All" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Group :" +#: ../../standalone/drakfont_.c:1116 +msgid "Selected All" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "After resizing partition %s, all data on this partition will be lost" +#: ../../standalone/drakfont_.c:1120 +msgid "Remove List" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet connection configuration" +#: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175 +msgid "Initials tests" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Add the name as an exception to the handling of password aging by msec." +#: ../../standalone/drakfont_.c:1145 +msgid "Copy fonts on your system" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "USB" +#: ../../standalone/drakfont_.c:1149 +msgid "Install & convert Fonts" msgstr "" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Scanning for TV channels" +#: ../../standalone/drakfont_.c:1153 +msgid "Post Install" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Kernel:" +#: ../../standalone/drakfont_.c:1178 +msgid "Remove fonts on your system" msgstr "" -#: ../../standalone/drakups:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_About..." +#: ../../standalone/drakfont_.c:1182 +msgid "Post Uninstall" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Bengali" +#: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182 +msgid "Internet Connection Sharing" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Preference: " +#: ../../standalone/drakgw_.c:114 +msgid "Sorry, we support only 2.4 kernels." msgstr "" -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services: %d activated for %d registered" +#: ../../standalone/drakgw_.c:125 +msgid "Internet Connection Sharing currently enabled" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Create a bootdisk" +#: ../../standalone/drakgw_.c:126 +msgid "" +"The setup of Internet connection sharing has already been done.\n" +"It's currently enabled.\n" +"\n" +"What would you like to do?" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Solomon Islands" +#: ../../standalone/drakgw_.c:130 +msgid "disable" msgstr "" -#: ../../standalone/mousedrake:1 -#, c-format -msgid "Please test your mouse:" +#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 +msgid "dismiss" msgstr "" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "(module %s)" +#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 +msgid "reconfigure" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Workgroup" +#: ../../standalone/drakgw_.c:133 +msgid "Disabling servers..." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer host name or IP" +#: ../../standalone/drakgw_.c:142 +msgid "Internet connection sharing is now disabled." msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 -#, c-format -msgid "down" +#: ../../standalone/drakgw_.c:149 +msgid "Internet Connection Sharing currently disabled" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Host Path or Module" +#: ../../standalone/drakgw_.c:150 +msgid "" +"The setup of Internet connection sharing has already been done.\n" +"It's currently disabled.\n" +"\n" +"What would you like to do?" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer should contain only letters, numbers and the underscore" +#: ../../standalone/drakgw_.c:154 +msgid "enable" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Show current interface configuration" +#: ../../standalone/drakgw_.c:161 +msgid "Enabling servers..." msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Add Printer" +#: ../../standalone/drakgw_.c:166 +msgid "Internet connection sharing is now enabled." msgstr "" -#: ../../security/help.pm:1 -#, c-format +#: ../../standalone/drakgw_.c:183 msgid "" -"The argument specifies if clients are authorized to connect\n" -"to the X server from the network on the tcp port 6000 or not." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "Development" +"You are about to configure your computer to share its Internet connection.\n" +"With that feature, other computers on your local network will be able to use " +"this computer's Internet connection.\n" +"\n" +"Make sure you have configured your Network/Internet access using drakconnect " +"before going any further.\n" +"\n" +"Note: you need a dedicated Network Adapter to set up a Local Area Network " +"(LAN)." msgstr "" -#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 +#: ../../standalone/drakgw_.c:211 #, c-format -msgid "Done" +msgid "Interface %s (using module %s)" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../standalone/drakgw_.c:212 #, c-format -msgid "Web Server" +msgid "Interface %s" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Chile" +#: ../../standalone/drakgw_.c:220 +msgid "No network adapter on your system!" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakgw_.c:221 msgid "" -"\tDo not include System Files\n" -"" +"No ethernet network adapter has been detected on your system. Please run the " +"hardware configuration tool." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to." +#: ../../standalone/drakgw_.c:227 +msgid "Network interface" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakgw_.c:228 #, c-format msgid "" -"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n" +"There is only one configured network adapter on your system:\n" "\n" -"Do not use \"scannerdrake\" for this device!" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "(already added %s)" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Bootloader installation in progress" -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid ", using command %s" -msgstr "" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Alt and Shift keys simultaneously" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Flags" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add/Del Users" -msgstr "" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Iwconfig command extra arguments" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Host/network IP address missing." -msgstr "" - -#: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 -#, c-format -msgid "(detected)" -msgstr "" - -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "weekly" -msgstr "" - -#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Settings" +"%s\n" +"\n" +"I am about to setup your Local Area Network with that adapter." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakgw_.c:235 msgid "" -"The entered host/network IP is not correct.\n" -"" +"Please choose what network adapter will be connected to your Local Area " +"Network." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Create/Transfer backup keys for SSH" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Here is the full list of available countries" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (A4)" +#: ../../standalone/drakgw_.c:261 +msgid "Network interface already configured" msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakgw_.c:262 #, c-format msgid "" -"If you have all the CDs in the list below, click Ok.\n" -"If you have none of those CDs, click Cancel.\n" -"If only some CDs are missing, unselect them, then click Ok." +"Warning, the network adapter (%s) is already configured.\n" +"\n" +"Do you want an automatic re-configuration?\n" +"\n" +"You can do it manually but you need to know what you're doing." msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Wait please" +#: ../../standalone/drakgw_.c:267 +msgid "Automatic reconfiguration" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "PAP" +#: ../../standalone/drakgw_.c:267 +msgid "No (experts only)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup user files" +#: ../../standalone/drakgw_.c:268 +msgid "Show current interface configuration" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "CD-ROM" +#: ../../standalone/drakgw_.c:269 +msgid "Current interface configuration" msgstr "" -#: ../../diskdrake/dav.pm:1 +#: ../../standalone/drakgw_.c:270 #, c-format -msgid "New" +msgid "" +"Current configuration of `%s':\n" +"\n" +"Network: %s\n" +"IP address: %s\n" +"IP attribution: %s\n" +"Driver: %s" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakgw_.c:283 msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"Root\" is the system\n" -"administrator and is the only user authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if the password that you chose too easy. As you\n" -"can see, you are not forced to enter a password, but we strongly advise you\n" -"against this. GNU/Linux is just as prone to operator error as any other\n" -"operating system. Since \"root\" can overcome all limitations and\n" -"unintentionally erase all data on partitions by carelessly accessing the\n" -"partitions themselves, it is important that it be difficult to become\n" -"\"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password -- it makes it far\n" -"too easy to compromise a system.\n" -"\n" -"One caveat -- do not make the password too long or complicated because you\n" -"must be able to remember it!\n" +"I can keep your current configuration and assume you already set up a DHCP " +"server; in that case please verify I correctly read the Network that you use " +"for your local network; I will not reconfigure it and I will not touch your " +"DHCP server configuration.\n" "\n" -"The password will not be displayed on screen as you type it in. To reduce\n" -"the chance of a blind typing error you will need to enter the password\n" -"twice. If you do happen to make the same typing error twice, this\n" -"``incorrect'' password will be the one you will have use the first time you\n" -"connect.\n" -"\n" -"If you wish access to this computer to be controlled by an authentication\n" -"server, click the \"%s\" button.\n" -"\n" -"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" -"services, select the appropriate one for \"%s\". If you do not know which\n" -"one to use, you should ask your network administrator.\n" +"The default DNS entry is the Caching Nameserver configured on the firewall. " +"You can replace that with your ISP DNS IP, for example.\n" +"\t\t \n" +"Else, I can reconfigure your interface and (re)configure a DHCP server for " +"you.\n" "\n" -"If you happen to have problems with remembering passwords, if your computer\n" -"will never be connected to the internet or that you absolutely trust\n" -"everybody who uses your computer, you can choose to have \"%s\"." msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Name resolution spoofing protection" +#: ../../standalone/drakgw_.c:290 +msgid "Local Network adress" msgstr "" -#: ../../help.pm:1 -#, c-format +#: ../../standalone/drakgw_.c:294 msgid "" -"At this point, DrakX will allow you to choose the security level desired\n" -"for the machine. As a rule of thumb, the security level should be set\n" -"higher if the machine will contain crucial data, or if it will be a machine\n" -"directly exposed to the Internet. The trade-off of a higher security level\n" -"is generally obtained at the expense of ease of use.\n" +"DHCP Server Configuration.\n" +"\n" +"Here you can select different options for the DHCP server configuration.\n" +"If you don't know the meaning of an option, simply leave it as it is.\n" "\n" -"If you do not know what to choose, stay with the default option." -msgstr "" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Load from floppy" -msgstr "" - -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "The following printer was auto-detected. " -msgstr "" - -#: ../../printer/main.pm:1 -#, c-format -msgid "Uses command %s" -msgstr "" - -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Boot Floppy" -msgstr "" - -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "Norwegian" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Searching for new scanners ..." +#: ../../standalone/drakgw_.c:300 +msgid "(This) DHCP Server IP" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Apache World Wide Web Server" +#: ../../standalone/drakgw_.c:301 +msgid "The DNS Server IP" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "stepping of the cpu (sub model (generation) number)" +#: ../../standalone/drakgw_.c:302 +msgid "The internal domain name" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "select path to restore (instead of /)" +#: ../../standalone/drakgw_.c:303 +msgid "The DHCP start range" msgstr "" -#: ../../standalone/draksplash:1 ../../standalone/draksplash:1 -#, c-format -msgid "Configure bootsplash picture" +#: ../../standalone/drakgw_.c:304 +msgid "The DHCP end range" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Georgia" +#: ../../standalone/drakgw_.c:305 +msgid "The default lease (in seconds)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "China" +#: ../../standalone/drakgw_.c:306 +msgid "The maximum lease (in seconds)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -" (Make sure that all your printers are connected and turned on).\n" -"" +#: ../../standalone/drakgw_.c:307 +msgid "Re-configure interface and DHCP server" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Reading data of installed printers..." +#: ../../standalone/drakgw_.c:314 +msgid "The Local Network did not finish with `.0', bailing out." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw_.c:325 #, c-format -msgid " Erase Now " +msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "server" +#: ../../standalone/drakgw_.c:335 +msgid "Configuring..." msgstr "" -#: ../../install_any.pm:1 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s" +#: ../../standalone/drakgw_.c:336 +msgid "Configuring scripts, installing software, starting servers..." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakgw_.c:372 #, c-format -msgid "yes means the processor has an arithmetic coprocessor" +msgid "Problems installing package %s" msgstr "" -#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Please Wait... Applying the configuration" +#: ../../standalone/drakgw_.c:505 +msgid "" +"Everything has been configured.\n" +"You may now share Internet connection with other computers on your Local " +"Area Network, using automatic network configuration (DHCP)." msgstr "" -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Welcome to GRUB the operating system chooser!" +#: ../../standalone/drakgw_.c:523 +msgid "The setup has already been done, but it's currently disabled." msgstr "" -#: ../../bootloader.pm:1 -#, c-format -msgid "Grub" +#: ../../standalone/drakgw_.c:524 +msgid "The setup has already been done, and it's currently enabled." msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "SCSI controllers" +#: ../../standalone/drakgw_.c:525 +msgid "No Internet Connection Sharing has ever been configured." msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid " on LPD server \"%s\", printer \"%s\"" +#: ../../standalone/drakgw_.c:531 +msgid "Internet connection sharing configuration" msgstr "" -#: ../../standalone/drakedm:1 +#: ../../standalone/drakgw_.c:539 #, c-format -msgid "Choosing a display manager" +msgid "" +"Welcome to the Internet Connection Sharing utility!\n" +"\n" +"%s\n" +"\n" +"Click on Configure to launch the setup wizard." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Zeroconf Host name" +#: ../../standalone/drakperm_.c:36 +msgid "group" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Custom setup/crontab entry:" +#: ../../standalone/drakperm_.c:36 +msgid "path" msgstr "" -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "IP address should be in format 1.2.3.4" +#: ../../standalone/drakperm_.c:36 +msgid "permissions" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Configure CUPS printing system" +#: ../../standalone/drakperm_.c:36 +msgid "user" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Ecuador" +#: ../../standalone/drakperm_.c:43 +msgid "Up" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Add an item" +#: ../../standalone/drakperm_.c:44 +msgid "delete" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printers on this machine are available to other computers" +#: ../../standalone/drakperm_.c:45 +msgid "edit" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "China (Hong Kong)" +#: ../../standalone/drakperm_.c:46 +msgid "Down" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "I can't find needed image file `%s'." +#: ../../standalone/drakperm_.c:47 +msgid "add a rule" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "No sound card detected. Try \"harddrake\" after installation" +#: ../../standalone/drakperm_.c:48 +msgid "select perm file to see/edit" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format +#: ../../standalone/drakperm_.c:51 msgid "" -"Invalid port given: %s.\n" -"The proper format is \"port/tcp\" or \"port/udp\", \n" -"where port is between 1 and 65535." +"Drakperm is used to see files to use in order to fix permissions, owners, " +"and groups via msec.\n" +"You can also edit your own rules which will owerwrite the default rules." msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Shell" +#: ../../standalone/drakperm_.c:56 +msgid "Add a new rule at the end" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Sao Tome and Principe" +#: ../../standalone/drakperm_.c:57 +msgid "Edit curent rule" msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "PCI" +#: ../../standalone/drakperm_.c:58 +msgid "Up selected rule one level" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Can't login using username %s (bad password?)" +#: ../../standalone/drakperm_.c:59 +msgid "Down selected rule one level" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Azerbaidjani (latin)" +#: ../../standalone/drakperm_.c:60 +msgid "Delete selected rule" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Package not installed" +#: ../../standalone/drakperm_.c:224 +msgid "browse" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "American Samoa" +#: ../../standalone/drakperm_.c:231 +msgid "Current user" msgstr "" -#: ../advertising/12-mdkexpert.pl:1 -#, c-format -msgid "Become a MandrakeExpert" +#: ../../standalone/drakperm_.c:236 +msgid "Permissions" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Protocol" +#: ../../standalone/drakperm_.c:237 +msgid "Path" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Copy fonts on your system" +#: ../../standalone/drakperm_.c:238 +msgid "Property" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Harddrake help" +#: ../../standalone/drakperm_.c:240 +msgid "sticky-bit" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bogomips" +#: ../../standalone/drakperm_.c:241 +msgid "Set-UID" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Mandrake Terminal Server Configuration" +#: ../../standalone/drakperm_.c:242 +msgid "Set-GID" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/drakperm_.c:296 msgid "" -"\n" -" DrakBackup Report Details\n" -"\n" -"\n" -"" +"Used for directory:\n" +" only owner of directory or file in this directory can delete it" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Restore all backups" +#: ../../standalone/drakperm_.c:297 +msgid "Use owner id for execution" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid " on parallel port #%s" +#: ../../standalone/drakperm_.c:298 +msgid "Use group id for execution" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters." +#: ../../standalone/drakperm_.c:299 +msgid "when checked, owner and group won't be changed" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, check open ports." +#: ../../standalone/drakperm_.c:304 +msgid "Path selection" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to erase the media." +#: ../../standalone/drakperm_.c:350 +msgid "user :" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't select/unselect this package" +#: ../../standalone/drakperm_.c:352 +msgid "group :" msgstr "" -#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../standalone/drakclock:1 ../../standalone/drakfloppy:1 ../../standalone/drakups:1 -#, c-format -msgid "Warning" +#: ../../standalone/draksound_.c:46 +msgid "No Sound Card detected!" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format +#: ../../standalone/draksound_.c:47 msgid "" +"No Sound Card has been detected on your machine. Please verify that a Linux-" +"supported Sound Card is correctly plugged in.\n" "\n" -"- Other Files:\n" -"" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name" -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "access to X programs" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Computing the size of the Windows partition" -msgstr "" - -#: ../../standalone/printerdrake:1 -#, c-format -msgid "/_Refresh" -msgstr "" - -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "Italy" +"\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cayman Islands" +#: ../../standalone/draksound_.c:54 +msgid "" +"\n" +"\n" +"\n" +"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " +"program. Just type \"sndconfig\" in a console." msgstr "" -#: ../../fs.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "error unmounting %s: %s" +#: ../../standalone/draksplash_.c:21 +msgid "" +"package 'ImageMagick' is required for correct working.\n" +"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer" +#: ../../standalone/draksplash_.c:67 +msgid "first step creation" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "disable" +#: ../../standalone/draksplash_.c:70 +msgid "final resolution" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do it!" +#: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163 +msgid "choose image file" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "%s not responding" +#: ../../standalone/draksplash_.c:72 +msgid "Theme name" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select model manually" +#: ../../standalone/draksplash_.c:77 +msgid "Browse" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Format" +#: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153 +msgid "Configure bootsplash picture" msgstr "" -#: ../../network/adsl.pm:1 -#, c-format +#: ../../standalone/draksplash_.c:90 msgid "" -"The most common way to connect with adsl is pppoe.\n" -"Some connections use pptp, a few use dhcp.\n" -"If you don't know, choose 'use pppoe'" +"x coordinate of text box\n" +"in number of character" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Various" +#: ../../standalone/draksplash_.c:91 +msgid "" +"y coordinate of text box\n" +"in number of character" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Zip" +#: ../../standalone/draksplash_.c:92 +msgid "text width" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Left Alt key" +#: ../../standalone/draksplash_.c:93 +msgid "text box height" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Load setting" +#: ../../standalone/draksplash_.c:94 +msgid "" +"the progress bar x coordinate\n" +"of its upper left corner" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/draksplash_.c:95 msgid "" -"\n" -"\n" -"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list." +"the progress bar y coordinate\n" +"of its upper left corner" msgstr "" -#: ../../standalone/printerdrake:1 -#, c-format -msgid "Set selected printer as the default printer" +#: ../../standalone/draksplash_.c:96 +msgid "the width of the progress bar" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"Mark the printers which you want to transfer and click \n" -"\"Transfer\"." +#: ../../standalone/draksplash_.c:97 +msgid "the heigth of the progress bar" msgstr "" -#: ../../printer/data.pm:1 -#, c-format -msgid "PDQ" +#: ../../standalone/draksplash_.c:98 +msgid "the color of the progress bar" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Albanian" +#: ../../standalone/draksplash_.c:113 +msgid "Preview" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Lithuania" +#: ../../standalone/draksplash_.c:115 +msgid "Save theme" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Compact" +#: ../../standalone/draksplash_.c:116 +msgid "Choose color" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detected model: %s %s" +#: ../../standalone/draksplash_.c:119 +msgid "Display logo on Console" msgstr "" -#: ../advertising/03-software.pl:1 -#, c-format -msgid "MandrakeSoft has selected the best software for you" +#: ../../standalone/draksplash_.c:120 +msgid "Make kernel message quiet by default" msgstr "" -#: ../../any.pm:1 +#: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321 #, c-format -msgid "Local files" +msgid "This theme haven't yet any bootsplash in %s !" msgstr "" -#: ../../pkgs.pm:1 -#, c-format -msgid "maybe" +#: ../../standalone/draksplash_.c:205 +msgid "saving Bootsplash theme..." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Panama" +#: ../../standalone/draksplash_.c:428 +msgid "ProgressBar color selection" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Can't open %s!" +#: ../../standalone/draksplash_.c:449 +msgid "You must choose an image file first!" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"Your graphic card seems to have a TV-OUT connector.\n" -"It can be configured to work using frame-buffer.\n" -"\n" -"For this you have to plug your graphic card to your TV before booting your computer.\n" -"Then choose the \"TVout\" entry in the bootloader\n" -"\n" -"Do you have this feature?" +#: ../../standalone/draksplash_.c:458 +msgid "Generating preview ..." msgstr "" -#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 +#. -PO First %s is theme name, second %s (in parenthesis) is resolution +#: ../../standalone/draksplash_.c:506 #, c-format -msgid "Monitor" +msgid "%s BootSplash (%s) preview" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/drakxtv_.c:46 msgid "" -"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n" +"XawTV isn't installed!\n" "\n" -"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n" "\n" -"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n" +"If you do have a TV card but DrakX has neither detected it (no bttv nor " +"saa7134\n" +"module in \"/etc/modules\") nor installed xawtv, please send the\n" +"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" +"with subject \"undetected TV card\".\n" "\n" -"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" "\n" -"" +"You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "65 thousand colors (16 bits)" +#: ../../standalone/drakxtv_.c:63 +msgid "Canada (cable)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Save on Hard drive on path: %s\n" -"" +#: ../../standalone/drakxtv_.c:63 +msgid "USA (broadcast)" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Remove fonts on your system" +#: ../../standalone/drakxtv_.c:63 +msgid "USA (cable)" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Warning, the network adapter (%s) is already configured.\n" -"\n" -"Do you want an automatic re-configuration?\n" -"\n" -"You can do it manually but you need to know what you're doing." +#: ../../standalone/drakxtv_.c:63 +msgid "USA (cable-hrc)" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Graphical interface at startup" +#: ../../standalone/drakxtv_.c:64 +msgid "China (broadcast)" msgstr "" -#: ../../raid.pm:1 -#, c-format -msgid "" -"Not enough partitions for RAID level %d\n" -"" +#: ../../standalone/drakxtv_.c:64 +msgid "Japan (broadcast)" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "format of floppies supported by the drive" +#: ../../standalone/drakxtv_.c:64 +msgid "Japan (cable)" msgstr "" -#: ../../network/tools.pm:1 -#, c-format -msgid "Firmware copy failed, file %s not found" +#: ../../standalone/drakxtv_.c:65 +msgid "East Europe" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "local config: true" +#: ../../standalone/drakxtv_.c:65 +msgid "France [SECAM]" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it." +#: ../../standalone/drakxtv_.c:65 +msgid "Ireland" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Connected" +#: ../../standalone/drakxtv_.c:65 +msgid "West Europe" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Macedonian" +#: ../../standalone/drakxtv_.c:66 +msgid "Australia" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Mali" +#: ../../standalone/drakxtv_.c:66 +msgid "Newzealand" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Bridges and system controllers" +#: ../../standalone/drakxtv_.c:67 +msgid "South Africa" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Save" +#: ../../standalone/drakxtv_.c:68 +msgid "Argentina" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "No details" +#: ../../standalone/drakxtv_.c:69 +msgid "Australian Optus cable TV" msgstr "" -#: ../../pkgs.pm:1 -#, c-format -msgid "very nice" +#: ../../standalone/drakxtv_.c:102 +msgid "" +"Please,\n" +"type in your tv norm and country" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "Preview" +#: ../../standalone/drakxtv_.c:104 +msgid "TV norm:" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Remote Control" +#: ../../standalone/drakxtv_.c:105 +msgid "Area:" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Please select media for backup..." +#: ../../standalone/drakxtv_.c:109 +msgid "Scanning for TV channels in progress ..." msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Wrong email" +#: ../../standalone/drakxtv_.c:116 +msgid "Scanning for TV channels" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"XFree86 server: %s\n" -"" +#: ../../standalone/drakxtv_.c:120 +msgid "There was an error while scanning for TV channels" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Allow Thin Clients" +#: ../../standalone/drakxtv_.c:121 +msgid "XawTV isn't installed!" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Georgian (\"Russian\" layout)" +#: ../../standalone/drakxtv_.c:124 +msgid "Have a nice day!" msgstr "" -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "/_Options" +#: ../../standalone/drakxtv_.c:125 +msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Your printer model" +#: ../../standalone/drakxtv_.c:147 +msgid "No TV Card detected!" msgstr "" -#: ../../any.pm:1 -#, c-format +#: ../../standalone/drakxtv_.c:148 msgid "" +"No TV Card has been detected on your machine. Please verify that a Linux-" +"supported Video/TV Card is correctly plugged in.\n" "\n" "\n" -"(WARNING! You're using XFS for your root partition,\n" -"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" -"because XFS needs a very large driver)." -msgstr "" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" +"You can visit our hardware database at:\n" "\n" -"- Delete hard drive tar files after backup.\n" -"" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "No CD or DVD image found, please copy the installation program and rpm files." +#: ../../standalone/harddrake2_.c:17 +msgid "Alternative drivers" msgstr "" -#: ../advertising/04-configuration.pl:1 -#, c-format -msgid "Mandrake's multipurpose configuration tool" +#: ../../standalone/harddrake2_.c:18 +msgid "the list of alternative drivers for this sound card" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/logdrake:1 -#, c-format -msgid "Save" +#: ../../standalone/harddrake2_.c:20 +msgid "Bus" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is unsupported" +#: ../../standalone/harddrake2_.c:21 +msgid "" +"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "Load the drivers for your usb devices." +#: ../../standalone/harddrake2_.c:22 +msgid "Channel" msgstr "" -#: ../../harddrake/data.pm:1 -#, c-format -msgid "Disk" +#: ../../standalone/harddrake2_.c:22 +msgid "EIDE/SCSI channel" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter a printer device URI" +#: ../../standalone/harddrake2_.c:23 +msgid "Bogomips" msgstr "" -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community." +#: ../../standalone/harddrake2_.c:23 +msgid "" +"The GNU/Linux kernel needs to do run a calculation loop at boot time\n" +"\t to initialize a timer counter. Its result is stored as bogomips as a way " +"to \"benchmark\" the cpu." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Israel" +#: ../../standalone/harddrake2_.c:26 +msgid "Bus identification" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "French Guiana" +#: ../../standalone/harddrake2_.c:27 +msgid "" +"- PCI and USB devices: this list the vendor, device, subvendor and subdevice " +"PCI/USB ids" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "default:LTR" +#: ../../standalone/harddrake2_.c:29 +msgid "Location on the bus" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "A command line must be entered!" +#: ../../standalone/harddrake2_.c:30 +msgid "" +"- pci devices: this gives the PCI slot, device and function of this card\n" +"- eide devices: the device is either a slave or a master device\n" +"- scsi devices: the scsi bus and the scsi device ids" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Select user manually" +#: ../../standalone/harddrake2_.c:33 +msgid "Cache size" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer printer configuration" +#: ../../standalone/harddrake2_.c:33 +msgid "Size of the (second level) cpu cache" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Do you want to enable printing on the printers mentioned above?\n" -"" +#: ../../standalone/harddrake2_.c:34 +msgid "Coma bug:" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check additions/removals of suid root files" +#: ../../standalone/harddrake2_.c:34 +msgid "Does this cpu has Cyrix 6x86 Coma bug ?" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "" -"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n" -"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n" -"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n" -"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n" -"The command 'wbinfo -t' will test whether your authentication secrets are good." +#: ../../standalone/harddrake2_.c:35 +msgid "Cpuid family" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "%s (Port %s)" +#: ../../standalone/harddrake2_.c:35 +msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use network connection to backup" +#: ../../standalone/harddrake2_.c:36 +msgid "Cpuid level" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Kernel version" +#: ../../standalone/harddrake2_.c:36 +msgid "Information level that can be obtained through the cpuid instruction" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"to make it simpler to manage the packages have been placed into groups of\n" -"similar applications.\n" -"\n" -"Packages are sorted into groups corresponding to a particular use of your\n" -"machine. Mandrake Linux has four predefined installations available. You\n" -"can think of these installation classes as containers for various packages.\n" -"You can mix and match applications from the various groups, so a\n" -"``Workstation'' installation can still have applications from the\n" -"``Development'' group installed.\n" -"\n" -" * \"%s\": if you plan to use your machine as a workstation, select one or\n" -"more of the applications that are in the workstation group.\n" -"\n" -" * \"%s\": if plan on using your machine for programming, choose the\n" -"appropriate packages from that group.\n" -"\n" -" * \"%s\": if your machine is intended to be a server, select which of the\n" -"more common services you wish to install on your machine.\n" -"\n" -" * \"%s\": this is where you will choose your preferred graphical\n" -"environment. At least one must be selected if you want to have a graphical\n" -"interface available.\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you unselect all groups when performing a regular\n" -"installation (as opposed to an upgrade), a dialog will pop up proposing\n" -"different options for a minimal installation:\n" -"\n" -" * \"%s\": install the minimum number of packages possible to have a\n" -"working graphical desktop.\n" -"\n" -" * \"%s\": installs the base system plus basic utilities and their\n" -"documentation. This installation is suitable for setting up a server.\n" -"\n" -" * \"%s\": will install the absolute minimum number of packages necessary\n" -"to get a working Linux system. With this installation you will only have a\n" -"command line interface. The total size of this installation is about 65\n" -"megabytes.\n" -"\n" -"You can check the \"%s\" box, which is useful if you are familiar with the\n" -"packages being offered or if you want to have total control over what will\n" -"be installed.\n" -"\n" -"If you started the installation in \"%s\" mode, you can unselect all groups\n" -"to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." +#: ../../standalone/harddrake2_.c:37 +msgid "Frequency (MHz)" msgstr "" -#: ../../any.pm:1 ../../help.pm:1 -#, c-format -msgid "Accept user" +#: ../../standalone/harddrake2_.c:37 +msgid "" +"The cpu frequency in Mhz (Mega herz which in first approximation may be " +"coarsely assimilated to number of instructions the cpu is able to execute " +"per second)" msgstr "" -#: ../../help.pm:1 ../../diskdrake/dav.pm:1 -#, c-format -msgid "Server" +#: ../../standalone/harddrake2_.c:38 +msgid "This field describes the device" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Left Shift key" +#: ../../standalone/harddrake2_.c:39 +msgid "Old device file" msgstr "" -#: ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"Bad choice, try again\n" -"" +#: ../../standalone/harddrake2_.c:40 +msgid "old static device name used in dev package" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Syslog reports to console 12" +#: ../../standalone/harddrake2_.c:41 +msgid "New devfs device" msgstr "" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Search new servers" +#: ../../standalone/harddrake2_.c:42 +msgid "new dinamic device name generated by incore kernel devfs" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Heard and McDonald Islands" +#: ../../standalone/harddrake2_.c:43 +msgid "Module" msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Instantaneous" +#: ../../standalone/harddrake2_.c:43 +msgid "the module of the GNU/Linux kernel that handle that device" msgstr "" -#: ../../harddrake/sound.pm:1 -#, c-format -msgid "No alternative driver" +#: ../../standalone/harddrake2_.c:44 +msgid "CPU flags reported by the kernel" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Toggle to expert mode" +#: ../../standalone/harddrake2_.c:44 +msgid "Flags" msgstr "" -#: ../../printer/cups.pm:1 -#, c-format -msgid "(on this machine)" +#: ../../standalone/harddrake2_.c:45 +msgid "Fdiv bug" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Gateway address should be in format 1.2.3.4" +#: ../../standalone/harddrake2_.c:46 +msgid "" +"Early Intel Pentium chips manufactured have a bug in their floating point " +"processor which did not achieve the attended precision when performing a " +"Floating point DIVision (FDIV)" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "\"%s\" based winmodem detected, do you want to install needed software ?" +#: ../../standalone/harddrake2_.c:49 +msgid "Is FPU present" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking at packages already installed..." +#: ../../standalone/harddrake2_.c:49 +msgid "yes means the processor has an arithmetic coprocessor" msgstr "" -#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Use Differential Backups" +#: ../../standalone/harddrake2_.c:50 +msgid "Does FPU have an irq vector" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakups:1 -#, c-format -msgid "Driver" +#: ../../standalone/harddrake2_.c:50 +msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"Linuxconf will sometimes arrange to perform various tasks\n" -"at boot-time to maintain the system configuration." +#: ../../standalone/harddrake2_.c:51 +msgid "Early pentium were buggy and freezed when decoding the F00F bytecode" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "DVD-R device" +#: ../../standalone/harddrake2_.c:51 +msgid "F00f bug" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Printer on remote lpd server" +#: ../../standalone/harddrake2_.c:52 +msgid "Halt bug" msgstr "" -#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 -#, c-format +#: ../../standalone/harddrake2_.c:53 msgid "" -"Before installing any fonts, be sure that you have the right to use and install them on your system.\n" -"\n" -"-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server." +"Some of the early i486DX-100 chips cannot reliably return to operating mode " +"after the \"halt\" instruction is used" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" -"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" -"detected and installed in the bootloader menu. If this is not the case, you\n" -"can add an entry by hand in this screen. Be careful to choose the correct\n" -"parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message displayed before the boot prompt.\n" -"\n" -" * Boot Device: indicates where you want to place the information required\n" -"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" -"to hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux;\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second increments\n" -"before your default kernel description is selected;\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" -"Open Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." +#: ../../standalone/harddrake2_.c:55 +msgid "Floppy format" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Wednesday" +#: ../../standalone/harddrake2_.c:55 +msgid "Format of floppies the drive accept" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Germany" +#: ../../standalone/harddrake2_.c:56 +msgid "Level" msgstr "" -#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Austria" +#: ../../standalone/harddrake2_.c:56 +msgid "Sub generation of the cpu" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "No mouse" +#: ../../standalone/harddrake2_.c:57 +msgid "Media class" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Choose your CD/DVD media size (MB)" +#: ../../standalone/harddrake2_.c:57 +msgid "class of hardware device" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Check permissions of files in the users' home" +#: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59 +msgid "Model" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Run \"sndconfig\" after installation to configure your sound card" +#: ../../standalone/harddrake2_.c:58 +msgid "hard disk model" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Configure networking" +#: ../../standalone/harddrake2_.c:59 +msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" -#: ../../ugtk2.pm:1 -#, c-format -msgid "Collapse Tree" +#: ../../standalone/harddrake2_.c:60 +msgid "Model name" msgstr "" -#: ../../standalone/drakautoinst:1 -#, c-format -msgid "Auto Install Configurator" +#: ../../standalone/harddrake2_.c:60 +msgid "Official vendor name of the cpu" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Where do you want to install the bootloader?" +#: ../../standalone/harddrake2_.c:61 +msgid "Number of buttons" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "" -"Your choice of preferred language will affect the language of the\n" -"documentation, the installer and the system in general. Select first the\n" -"region you are located in, and then the language you speak.\n" -"\n" -"Clicking on the \"%s\" button will allow you to select other languages to\n" -"be installed on your workstation, thereby installing the language-specific\n" -"files for system documentation and applications. For example, if you will\n" -"host users from Spain on your machine, select English as the default\n" -"language in the tree view and \"%s\" in the Advanced section.\n" -"\n" -"Note that you're not limited to choosing a single additional language. You\n" -"may choose several ones, or even install them all by selecting the \"%s\"\n" -"box. Selecting support for a language means translations, fonts, spell\n" -"checkers, etc. for that language will be installed. Additionally, the\n" -"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" -"however that this is an experimental feature. If you select different\n" -"languages requiring different encoding the unicode support will be\n" -"installed anyway.\n" -"\n" -"To switch between the various languages installed on the system, you can\n" -"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" -"language used by the entire system. Running the command as a regular user\n" -"will only change the language settings for that particular user." +#: ../../standalone/harddrake2_.c:62 +msgid "Name" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "The %s is not supported by this version of Mandrake Linux." +#: ../../standalone/harddrake2_.c:63 +msgid "network printer port" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "tape" +#: ../../standalone/harddrake2_.c:64 +msgid "Processor ID" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP client" +#: ../../standalone/harddrake2_.c:64 +msgid "the number of the processor" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "List users on display managers (kdm and gdm)" +#: ../../standalone/harddrake2_.c:65 +msgid "Model stepping" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech Mouse (serial, old C7 type)" +#: ../../standalone/harddrake2_.c:65 +msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" -#: ../../partition_table.pm:1 -#, c-format -msgid "Restoring from file %s failed: %s" +#: ../../standalone/harddrake2_.c:66 +msgid "The type of bus on which the mouse is connected" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "" -"I can't read the partition table of device %s, it's too corrupted for me :(\n" -"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" -"The other solution is to not allow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to lose all the partitions?\n" -"" +#: ../../standalone/harddrake2_.c:67 +msgid "the vendor name of the device" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Find Package" +#: ../../standalone/harddrake2_.c:68 +msgid "the vendor name of the processor" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"Are you sure that you want to set up printing on this machine?\n" -"" +#: ../../standalone/harddrake2_.c:82 +msgid "/_Quit" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "New devfs device" +#: ../../standalone/harddrake2_.c:83 +msgid "/Autodetect _printers" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "ERROR: Cannot spawn %s." +#: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85 +#: ../../standalone/logdrake_.c:81 +msgid "/_Options" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Boot Style Configuration" +#: ../../standalone/harddrake2_.c:85 +msgid "/Autodetect _modems" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Automatic time synchronization" +#: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89 +#: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102 +#: ../../standalone/logdrake_.c:83 +msgid "/_Help" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup files not found at %s." +#: ../../standalone/harddrake2_.c:89 +msgid "/_Help..." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Armenian (phonetic)" +#: ../../standalone/harddrake2_.c:92 +msgid "Harddrake help" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "Card model:" +#: ../../standalone/harddrake2_.c:93 +msgid "" +"Description of the fields:\n" +"\n" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Thin Client" +#: ../../standalone/harddrake2_.c:96 +msgid "" +"Once you've selected a device, you'll be able to see explanations on fields " +"displayed on the right frame (\"Information\")" msgstr "" -#: ../advertising/01-thanks.pl:1 -#, c-format -msgid "Thank you for choosing Mandrake Linux 9.2" +#: ../../standalone/harddrake2_.c:96 +msgid "Select a device !" msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Start Server" +#: ../../standalone/harddrake2_.c:100 +msgid "/_Report Bug" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Turkmenistan" +#: ../../standalone/harddrake2_.c:102 +msgid "/_About..." msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "All remote machines" +#: ../../standalone/harddrake2_.c:104 +msgid "About Harddrake" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Install themes" +#: ../../standalone/harddrake2_.c:105 +msgid "" +"This is HardDrake, a Mandrake hardware configuration tool.\n" +"Version:" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Espanol" +#: ../../standalone/harddrake2_.c:106 +msgid "Author:" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing installation" +#: ../../standalone/harddrake2_.c:113 +msgid "Detection in progress" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Edit selected host/network" +#: ../../standalone/harddrake2_.c:119 +msgid "Harddrake2 version " msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Add User -->" +#: ../../standalone/harddrake2_.c:126 +msgid "Detected hardware" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Nauru" +#: ../../standalone/harddrake2_.c:129 +msgid "Information" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "True Type fonts installation" +#: ../../standalone/harddrake2_.c:131 +msgid "Configure module" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Auto-detect printers connected directly to the local network" +#: ../../standalone/harddrake2_.c:137 +msgid "Run config tool" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 +#: ../../standalone/harddrake2_.c:143 #, c-format -msgid "LAN configuration" +msgid "Running \"%s\" ..." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "hard disk model" +#: ../../standalone/harddrake2_.c:159 +msgid "" +"Click on a device in the left tree in order to get its information displayed " +"here." msgstr "" -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "" -" - Maintain /etc/exports:\n" -" \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n" -" \tsets up the correct entry to allow anonymous access to the root filesystem from\n" -" \tdiskless clients.\n" -"\n" -" \tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t/\t\t\t\t\t(ro,all_squash)\n" -" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -" \tWith SUBNET/MASK being defined for your network." +#: ../../standalone/harddrake2_.c:231 +msgid "primary" msgstr "" -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use a LVM Logical Volume for mount point %s" +#: ../../standalone/harddrake2_.c:231 +msgid "secondary" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Get Windows Fonts" +#: ../../standalone/harddrake2_.c:260 +msgid "/Autodetect modems" msgstr "" -#: ../../mouse.pm:1 -#, c-format -msgid "Mouse Systems" +#: ../../standalone/harddrake2_.c:260 +msgid "/Autodetect printers" msgstr "" -#: ../../standalone/drakclock:1 -#, c-format -msgid "" -"Your computer can synchronize its clock\n" -" with a remote time server using NTP" +#: ../../standalone/harddrake2_.c:261 +msgid "/Options" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Iranian" +#: ../../standalone/keyboarddrake_.c:26 +msgid "Please, choose your keyboard layout." msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Croatia" +#: ../../standalone/keyboarddrake_.c:35 +msgid "Do you want the BackSpace to return Delete in console?" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Install firmware file from" +#: ../../standalone/livedrake_.c:18 +msgid "Change Cd-Rom" msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway:" +#: ../../standalone/livedrake_.c:19 +msgid "" +"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" +"If you don't have it, press Cancel to avoid live upgrade." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Add server" +#: ../../standalone/livedrake_.c:29 +msgid "Unable to start live upgrade !!!\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name" +#: ../../standalone/localedrake_.c:34 +msgid "The change is done, but to be effective you must logout" msgstr "" -#: ../advertising/10-security.pl:1 -#, c-format -msgid "MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together in order to highly reduce hacking risks." +#: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350 +msgid "logdrake" msgstr "" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Device: " +#: ../../standalone/logdrake_.c:68 +msgid "Show only for the selected day" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 -#, c-format -msgid "Printerdrake" +#: ../../standalone/logdrake_.c:75 +msgid "/File/_New" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "License agreement" +#: ../../standalone/logdrake_.c:75 +msgid "<control>N" msgstr "" -#: ../../standalone/draksec:1 -#, c-format -msgid "System Options" +#: ../../standalone/logdrake_.c:76 +msgid "/File/_Open" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "Please choose the desired security level" +#: ../../standalone/logdrake_.c:76 +msgid "<control>O" msgstr "" -#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "" -"This host is already in the list, it cannot be added again.\n" -"" +#: ../../standalone/logdrake_.c:77 +msgid "/File/_Save" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid ", USB printer" +#: ../../standalone/logdrake_.c:77 +msgid "<control>S" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "" -"Unable to properly close mkbootdisk:\n" -"\n" -"<span foreground=\"Red\"><tt>%s</tt></span>" +#: ../../standalone/logdrake_.c:78 +msgid "/File/Save _As" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Incremental backups only save files that have changed or are new since the last backup." +#: ../../standalone/logdrake_.c:79 +msgid "/File/-" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Choose the applications that will support the fonts:" +#: ../../standalone/logdrake_.c:82 +msgid "/Options/Test" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Configure X" +#: ../../standalone/logdrake_.c:84 +msgid "/Help/_About..." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "hd" +#: ../../standalone/logdrake_.c:145 +msgid "User" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Turkish (traditional \"F\" model)" +#: ../../standalone/logdrake_.c:146 +msgid "Messages" msgstr "" -#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Congratulations!" +#: ../../standalone/logdrake_.c:147 +msgid "Syslog" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Use owner id for execution" +#: ../../standalone/logdrake_.c:148 +msgid "Mandrake Tools Explanations" msgstr "" -#: ../../security/l10n.pm:1 -#, c-format -msgid "Allow remote root login" +#: ../../standalone/logdrake_.c:151 +msgid "search" msgstr "" -#: ../../standalone/drakperm:1 -#, c-format -msgid "Down" +#: ../../standalone/logdrake_.c:161 +msgid "A tool to monitor your logs" msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Raw printer (No driver)" +#: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91 +msgid "Settings" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Install rpm" +#: ../../standalone/logdrake_.c:167 +msgid "matching" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n" -"" +#: ../../standalone/logdrake_.c:168 +msgid "but not matching" msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Time remaining " +#: ../../standalone/logdrake_.c:172 +msgid "Choose file" msgstr "" -#: ../../keyboard.pm:1 ../../keyboard.pm:1 -#, c-format -msgid "UK keyboard" +#: ../../standalone/logdrake_.c:181 +msgid "Calendar" msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#, c-format -msgid "Unmount" +#: ../../standalone/logdrake_.c:191 +msgid "Content of the file" msgstr "" -#: ../../standalone/drakups:1 -#, c-format -msgid "The wizard successfully added the following UPS devices:" +#: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375 +msgid "Mail alert" msgstr "" -#: ../../mouse.pm:1 ../../mouse.pm:1 +#: ../../standalone/logdrake_.c:245 #, c-format -msgid "Microsoft Explorer" +msgid "please wait, parsing file: %s" msgstr "" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Uninstall Fonts" +#: ../../standalone/logdrake_.c:392 +msgid "Mail alert configuration" msgstr "" -#: ../../wizards.pm:1 -#, c-format +#: ../../standalone/logdrake_.c:393 msgid "" -"%s is not installed\n" -"Click \"Next\" to install or \"Cancel\" to quit" +"Welcome to the mail configuration utility.\n" +"\n" +"Here, you'll be able to set up the alert system.\n" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Please wait, detecting and configuring devices..." +#: ../../standalone/logdrake_.c:400 +msgid "Apache World Wide Web Server" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "German (no dead keys)" +#: ../../standalone/logdrake_.c:401 +msgid "Domain Name Resolver" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\tSend mail to %s\n" -"" +#: ../../standalone/logdrake_.c:402 +msgid "Ftp Server" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transferring %s..." +#: ../../standalone/logdrake_.c:403 +msgid "Postfix Mail Server" msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 -#, c-format -msgid "32 thousand colors (15 bits)" +#: ../../standalone/logdrake_.c:404 +msgid "Samba Server" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "You can export using NFS or Samba. Please select which you'd like to use." +#: ../../standalone/logdrake_.c:405 +msgid "SSH Server" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Gambia" +#: ../../standalone/logdrake_.c:406 +msgid "Webmin Service" msgstr "" -#: ../../standalone/drakbug:1 -#, c-format -msgid "Mandrake Control Center" +#: ../../standalone/logdrake_.c:407 +msgid "Xinetd Service" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Reboot" +#: ../../standalone/logdrake_.c:414 +msgid "service setting" msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device" +#: ../../standalone/logdrake_.c:415 +msgid "" +"You will receive an alert if one of the selected services is no more running" msgstr "" -#: ../../network/drakfirewall.pm:1 -#, c-format -msgid "" -"You can enter miscellaneous ports. \n" -"Valid examples are: 139/tcp 139/udp.\n" -"Have a look at /etc/services for information." +#: ../../standalone/logdrake_.c:428 +msgid "load setting" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\t-Tape \n" -"" +#: ../../standalone/logdrake_.c:429 +msgid "You will receive an alert if the load is higher than this value" msgstr "" -#: ../../standalone/drakhelp:1 -#, c-format -msgid "No browser is installed on your system, Please install one if you want to browse the help system" +#: ../../standalone/logdrake_.c:444 +msgid "alert configuration" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Remember this password" +#: ../../standalone/logdrake_.c:445 +msgid "Please enter your email address below " msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "due to unsatisfied %s" +#: ../../standalone/logdrake_.c:486 +msgid "Save as.." msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Internet Connection Sharing is now enabled." +#: ../../standalone/mousedrake_.c:37 +msgid "Please, choose the type of your mouse." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\t-Network by SSH.\n" -"" +#: ../../standalone/mousedrake_.c:50 +msgid "Emulate third button?" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed." +#: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87 +msgid "Network Monitoring" msgstr "" -#: ../../help.pm:1 ../../install_interactive.pm:1 -#, c-format -msgid "Use the free space on the Windows partition" +#: ../../standalone/net_monitor_.c:96 +msgid "Profile " msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "%s found on %s, configure it automatically?" +#: ../../standalone/net_monitor_.c:99 +msgid "Statistics" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Remove a network interface" +#: ../../standalone/net_monitor_.c:103 +msgid "Sending Speed:" msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"XFree86 driver: %s\n" -"" +#: ../../standalone/net_monitor_.c:104 +msgid "Receiving Speed:" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"This host/network is already in the list, it cannot be added again.\n" -"" +#: ../../standalone/net_monitor_.c:106 +msgid "Connection Time: " msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the packages you want to install" +#: ../../standalone/net_monitor_.c:113 +msgid "Logs" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Papua New Guinea" +#: ../../standalone/net_monitor_.c:147 +msgid "Wait please, testing your connection..." msgstr "" -#: ../../printer/main.pm:1 -#, c-format -msgid "Multi-function device on a parallel port" +#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 +msgid "Connecting to Internet " msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Serbian (cyrillic)" +#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 +msgid "Disconnecting from Internet " msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "(detected %s)" +#: ../../standalone/net_monitor_.c:222 +msgid "Disconnection from Internet failed." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Enter the directory where backups are stored" +#: ../../standalone/net_monitor_.c:223 +msgid "Disconnection from Internet complete." msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "Make kernel message quiet by default" +#: ../../standalone/net_monitor_.c:225 +msgid "Connection complete." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../standalone/net_monitor_.c:226 msgid "" -"Do you want to set this printer (\"%s\")\n" -"as the default printer?" +"Connection failed.\n" +"Verify your configuration in the Mandrake Control Center." msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "The DHCP end range" +#: ../../standalone/net_monitor_.c:330 +msgid "Color configuration" msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Creating bootdisk..." +#: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403 +msgid "sent: " msgstr "" -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Wait please, testing your connection..." +#: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407 +msgid "received: " msgstr "" -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing down the network" +#: ../../standalone/net_monitor_.c:397 +msgid "average" msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP\n" -"networks. This service provides NFS file locking functionality." +#: ../../standalone/net_monitor_.c:400 +msgid "Local measure" msgstr "" -#: ../../network/netconnect.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Login ID" +#: ../../standalone/net_monitor_.c:432 +msgid "transmitted" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP Client" +#: ../../standalone/net_monitor_.c:433 +msgid "received" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format +#: ../../standalone/net_monitor_.c:453 msgid "" -"This is HardDrake, a Mandrake hardware configuration tool.\n" -"<span foreground=\"royalblue3\">Version:</span> %s\n" -"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <tvignaud@mandrakesoft.com>\n" -"\n" -"" +"Warning, another internet connection has been detected, maybe using your " +"network" msgstr "" -#: ../../standalone/drakgw:1 ../../standalone/drakgw:1 +#: ../../standalone/net_monitor_.c:459 #, c-format -msgid "dismiss" +msgid "Connect %s" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/net_monitor_.c:459 #, c-format -msgid "Printing/Scanning on \"%s\"" +msgid "Disconnect %s" msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "omit raid modules" +#: ../../standalone/printerdrake_.c:47 +msgid "Reading printer data ..." msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "" -"lpd is the print daemon required for lpr to work properly. It is\n" -"basically a server that arbitrates print jobs to printer(s)." +#: ../../standalone/scannerdrake_.c:39 +msgid "Detecting devices ..." msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Irish" +#: ../../standalone/scannerdrake_.c:39 +msgid "Test ports" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66 +#: ../../standalone/scannerdrake_.c:79 #, c-format -msgid "Sunday" +msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../standalone/scannerdrake_.c:54 #, c-format -msgid "Internet Connection Configuration" +msgid "%s found on %s, configure it?" msgstr "" -#: ../../modules/parameters.pm:1 +#: ../../standalone/scannerdrake_.c:57 #, c-format -msgid "comma separated numbers" +msgid "%s is not in the scanner database, configure it manually?" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")" +#: ../../standalone/scannerdrake_.c:63 +msgid "Select a scanner" msgstr "" -#: ../../standalone/drakperm:1 +#: ../../standalone/scannerdrake_.c:91 #, c-format -msgid "Move selected rule up one level" +msgid "This %s scanner is unsupported" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/scannerdrake_.c:105 #, c-format msgid "" -"The following scanner\n" -"\n" -"%s\n" -"is available on your system.\n" -"" +"Scannerdrake was not able to detect your %s scanner.\n" +"Please select the device where your scanner is plugged" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do you really want to remove the printer \"%s\"?" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "I can't find any room for installing" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Default printer" +#: ../../standalone/scannerdrake_.c:107 +msgid "choose device" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../standalone/scannerdrake_.c:113 #, c-format msgid "" -"You have configured multiple ways to connect to the Internet.\n" -"Choose the one you want to use.\n" -"\n" -"" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Modify RAID" +"This %s scanner must be configured by printerdrake.\n" +"You can launch printerdrake from the Mandrake Control Center in Hardware " +"section." msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "Add user" -msgstr "" - -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/scannerdrake_.c:118 #, c-format msgid "" -"RAID-disks %s\n" -"" +"Your %s scanner has been configured.\n" +"You may now scan documents using ``XSane'' from Multimedia/Graphics in the " +"applications menu." msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/service_harddrake_.c:44 #, c-format -msgid "Liberia" +msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Could not install the packages needed to set up a scanner with Scannerdrake." +#: ../../standalone/service_harddrake_.c:48 +msgid "Some devices were added:\n" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Choose your keyboard" +#: ../../standalone/service_harddrake_.c:64 +msgid "Hardware probing in progress" msgstr "" -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"Please enter the name of the interface connected to the internet.\n" -"\n" -"Examples:\n" -"\t\tppp+ for modem or DSL connections, \n" -"\t\teth0, or eth1 for cable connection, \n" -"\t\tippp+ for a isdn connection.\n" -"" +#: ../../steps.pm_.c:14 +msgid "Choose your language" msgstr "" -#: ../../steps.pm:1 -#, c-format -msgid "Format partitions" +#: ../../steps.pm_.c:15 +msgid "Select installation class" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Automatic correction of CUPS configuration" +#: ../../steps.pm_.c:16 +msgid "Hard drive detection" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Running \"%s\" ..." +#: ../../steps.pm_.c:17 +msgid "Configure mouse" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "enable radio support" +#: ../../steps.pm_.c:18 +msgid "Choose your keyboard" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Scanner sharing to hosts: " +#: ../../steps.pm_.c:19 +msgid "Security" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: %s" +#: ../../steps.pm_.c:20 +msgid "Setup filesystems" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Please choose the printer to which the print jobs should go." +#: ../../steps.pm_.c:21 +msgid "Format partitions" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Do not transfer printers" +#: ../../steps.pm_.c:22 +msgid "Choose packages to install" msgstr "" -#: ../../help.pm:1 -#, c-format -msgid "Delay before booting the default image" +#: ../../steps.pm_.c:23 +msgid "Install system" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Use Hard Disk to backup" +#: ../../steps.pm_.c:25 +msgid "Add a user" msgstr "" -#: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 -#, c-format -msgid "Configure" +#: ../../steps.pm_.c:26 +msgid "Configure networking" msgstr "" -#: ../../scanner.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 -#, c-format -msgid "Scannerdrake" +#: ../../steps.pm_.c:28 +msgid "Configure services" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Warning, another Internet connection has been detected, maybe using your network" +#: ../../steps.pm_.c:29 +msgid "Install bootloader" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Backup Users" +#: ../../steps.pm_.c:31 +msgid "Create a bootdisk" msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Please enter your host name.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''.\n" -"You may also enter the IP address of the gateway if you have one." +#: ../../steps.pm_.c:33 +msgid "Configure X" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Select Printer Spooler" +#: ../../steps.pm_.c:34 +msgid "Install system updates" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Create new theme" +#: ../../steps.pm_.c:35 +msgid "Exit install" msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "Mandrake Tools Explanation" +#: ../../ugtk.pm_.c:636 +msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" -#: ../../standalone/drakpxe:1 -#, c-format -msgid "No image found" +#: ../../ugtk2.pm_.c:711 +msgid "utopia 25" msgstr "" -#: ../../install_steps.pm:1 -#, c-format -msgid "" -"Some important packages didn't get installed properly.\n" -"Either your cdrom drive or your cdrom is defective.\n" -"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n" -"" +#: ../../share/compssUsers:999 +msgid "Web/FTP" msgstr "" -#: ../advertising/06-development.pl:1 -#, c-format -msgid "Mandrake Linux 9.2: the ultimate development platform" +#: ../../share/compssUsers:999 +msgid "Network Computer (client)" msgstr "" -#: ../../standalone/scannerdrake:1 -#, c-format -msgid "Detected model: %s" +#: ../../share/compssUsers:999 +msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" -#: ../../standalone/drakedm:1 -#, c-format -msgid "" -"X11 Display Manager allows you to graphically log\n" -"into your system with the X Window System running and supports running\n" -"several different X sessions on your local machine at the same time." +#: ../../share/compssUsers:999 +msgid "Office" msgstr "" -#: ../../security/help.pm:1 -#, c-format -msgid "if set to yes, run the daily security checks." +#: ../../share/compssUsers:999 +msgid "Gnome Workstation" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Azerbaijan" +#: ../../share/compssUsers:999 +msgid "Tools for your Palm Pilot or your Visor" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Device name to use for backup" +#: ../../share/compssUsers:999 +msgid "Workstation" msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "No tape in %s!" +#: ../../share/compssUsers:999 +msgid "Firewall/Router" msgstr "" -#: ../../standalone/drakhelp:1 -#, c-format -msgid "" -" --doc <link> - link to another web page ( for WM welcome frontend)\n" -"" +#: ../../share/compssUsers:999 +msgid "Domain Name and Network Information Server" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Dvorak (US)" +#: ../../share/compssUsers:999 +msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" +#: ../../share/compssUsers:999 +msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "How is the printer connected?" +#: ../../share/compssUsers:999 +msgid "Linux Standard Base. Third party applications support" msgstr "" -#: ../../security/level.pm:1 -#, c-format -msgid "Security level" +#: ../../share/compssUsers:999 +msgid "Books and Howto's on Linux and Free Software" msgstr "" -#: ../../standalone/draksplash:1 -#, c-format -msgid "final resolution" +#: ../../share/compssUsers:999 +msgid "KDE Workstation" msgstr "" -#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, c-format -msgid "Services" +#: ../../share/compssUsers:999 +msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" -#: /home/srtxg/ftp/Mandrake/cooker/gi/move/move.pm:1 -#, c-format -msgid "Auto configuration" +#: ../../share/compssUsers:999 +msgid "Multimedia - Video" msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "4 MB" +#: ../../share/compssUsers:999 +msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" - #: ../../share/compssUsers:999 -msgid "Office Workstation" +msgid "Database" msgstr "" #: ../../share/compssUsers:999 -msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" +msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 -msgid "Game station" +msgid "Tools to ease the configuration of your computer" msgstr "" #: ../../share/compssUsers:999 -msgid "Amusement programs: arcade, boards, strategy, etc" +msgid "Multimedia - Sound" msgstr "" #: ../../share/compssUsers:999 -msgid "Multimedia station" +msgid "Documentation" msgstr "" #: ../../share/compssUsers:999 -msgid "Sound and video playing/editing programs" +msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 -msgid "Internet station" +msgid "Postfix mail server, Inn news server" msgstr "" #: ../../share/compssUsers:999 -msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web" +msgid "Internet station" msgstr "" #: ../../share/compssUsers:999 -msgid "Network Computer (client)" +msgid "Multimedia station" msgstr "" #: ../../share/compssUsers:999 -msgid "Clients for different protocols including ssh" +msgid "Configuration" msgstr "" #: ../../share/compssUsers:999 -msgid "Configuration" +msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" #: ../../share/compssUsers:999 -msgid "Tools to ease the configuration of your computer" +msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" msgstr "" #: ../../share/compssUsers:999 -msgid "Scientific Workstation" +msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 -msgid "Scientific applications such as gnuplot" +msgid "Development" msgstr "" #: ../../share/compssUsers:999 -msgid "Console Tools" +msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 -msgid "Editors, shells, file tools, terminals" +msgid "Tools to create and burn CD's" msgstr "" #: ../../share/compssUsers:999 -msgid "KDE Workstation" +msgid "Office Workstation" msgstr "" #: ../../share/compssUsers:999 -msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" +msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 -msgid "Gnome Workstation" +msgid "Graphics programs such as The Gimp" msgstr "" #: ../../share/compssUsers:999 -msgid "A graphical environment with user-friendly set of applications and desktop tools" +msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 -msgid "Other Graphical Desktops" +msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 -msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" +msgid "Network Computer server" msgstr "" #: ../../share/compssUsers:999 -msgid "C and C++ development libraries, programs and include files" +msgid "Mail/Groupware/News" msgstr "" #: ../../share/compssUsers:999 -msgid "Documentation" +msgid "Game station" msgstr "" #: ../../share/compssUsers:999 -msgid "Books and Howto's on Linux and Free Software" +msgid "Video players and editors" msgstr "" #: ../../share/compssUsers:999 -msgid "LSB" +msgid "Multimedia - Graphics" msgstr "" #: ../../share/compssUsers:999 -msgid "Linux Standard Base. Third party applications support" +msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 -msgid "Web/FTP" +msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web" msgstr "" #: ../../share/compssUsers:999 -msgid "Apache, Pro-ftpd" +msgid "Personal Finance" msgstr "" #: ../../share/compssUsers:999 -msgid "Mail" +msgid "A graphical environment with user-friendly set of applications and desktop tools" msgstr "" #: ../../share/compssUsers:999 -msgid "Postfix mail server" +msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 -msgid "Database" +msgid "LSB" msgstr "" #: ../../share/compssUsers:999 -msgid "PostgreSQL or MySQL database server" +msgid "Internet gateway" msgstr "" #: ../../share/compssUsers:999 -msgid "Firewall/Router" +msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 -msgid "Internet gateway" +msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 -msgid "DNS/NIS " +msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 -msgid "Domain Name and Network Information Server" +msgid "Programs to manage your finance, such as gnucash" msgstr "" #: ../../share/compssUsers:999 -msgid "Network Computer server" +msgid "Personal Information Management" msgstr "" #: ../../share/compssUsers:999 -msgid "NFS server, SMB server, Proxy server, ssh server" +msgid "Multimedia - CD Burning" msgstr "" #: ../../share/compssUsers:999 -msgid "Set of tools to read and send mail and news and to browse the Web" +msgid "Scientific Workstation" msgstr "" |