summaryrefslogtreecommitdiffstats
path: root/perl-install/printerdrake.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printerdrake.pm')
-rw-r--r--perl-install/printerdrake.pm46
1 files changed, 23 insertions, 23 deletions
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index 0e3042c2e..82b7c11df 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -142,7 +142,7 @@ sub setup_printer_connection {
sub auto_detect {
my ($in) = @_;
{
- my $w = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
+ my $w = $in->wait_message(_("Test ports"), _("Detecting devices..."));
modules::get_alias("usb-interface") and eval { modules::load("printer"); sleep(2); };
foreach (qw(lp parport_pc parport_probe parport)) {
eval { modules::unload($_); }; #- on kernel 2.4 parport has to be unloaded to probe again
@@ -486,7 +486,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
}
# Configure and start HPOJ
my $w = $in->wait_message
- ('', _("Checking device and configuring HPOJ ..."));
+ ('', _("Checking device and configuring HPOJ..."));
$ptaldevice = printer::configure_hpoj($device, @parport);
if ($ptaldevice) {
@@ -533,7 +533,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
#- if CUPS is the spooler, make sure that CUPS knows the device
if ($printer->{SPOOLER} eq "cups") {
my $w = $in->wait_message
- ('', _("Making printer port available for CUPS ..."));
+ ('', _("Making printer port available for CUPS..."));
if ($ptaldevice eq "") {
printer::assure_device_is_available_for_cups($device);
} else {
@@ -543,7 +543,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
@@ -1017,10 +1017,10 @@ sub get_db_entry {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
- my $w = $in->wait_message('', _("Preparing printer database ..."));
+ my $w = $in->wait_message('', _("Preparing printer database..."));
my $queue = $printer->{OLD_QUEUE};
if ($printer->{configured}{$queue}) {
# The queue was already configured
@@ -1131,7 +1131,7 @@ sub choose_model {
$in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
if (!$printer::thedb{$printer->{DBENTRY}}) {
@@ -1152,7 +1152,7 @@ sub get_printer_info {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
#if ((keys %printer::thedb) == 0) {
- # my $w = $in->wait_message('', _("Reading printer database ..."));
+ # my $w = $in->wait_message('', _("Reading printer database..."));
# printer::read_printer_db($printer->{SPOOLER});
#}
my $queue = $printer->{OLD_QUEUE};
@@ -1461,7 +1461,7 @@ sub setup_options {
push(@userinputs, $optshortdefault);
push(@widgets,
{ label => $printer->{ARGS}[$i]{'comment'} .
- " ($printer->{ARGS}[$i]{'min'} ... " .
+ " ($printer->{ARGS}[$i]{'min'}... " .
"$printer->{ARGS}[$i]{'max'})",
#type => 'range',
#min => $printer->{ARGS}[$i]{'min'},
@@ -1794,7 +1794,7 @@ sub copy_queues_from {
my $oldspoolerstr;
my $noninteractive = 0;
{
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
@oldqueues = sort(@oldqueues);
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
@@ -1867,7 +1867,7 @@ You can also type a new name or skip this printer.",
[{label => _("New printer name"),val => \$newqueue}]))) {
{
my $w = $in->wait_message('',
- _("Transferring %s ...", $oldqueue));
+ _("Transferring %s...", $oldqueue));
printer::copy_foomatic_queue($printer, $oldqueue,
$oldspooler, $newqueue) and
$queuecopied = 1;
@@ -1887,7 +1887,7 @@ You can also type a new name or skip this printer.",
}
}
if ($queuecopied) {
- my $w = $in->wait_message('', _("Refreshing printer data ..."));
+ my $w = $in->wait_message('', _("Refreshing printer data..."));
printer::read_configured_queues($printer);
}
}
@@ -1896,7 +1896,7 @@ You can also type a new name or skip this printer.",
sub start_network {
my ($in, $upNetwork) = @_;
my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Starting network ..."));
+ _("Starting network..."));
if ($::isInstall) {
return ($upNetwork and
do { my $ret = &$upNetwork();
@@ -1979,7 +1979,7 @@ _("The network access was not running and could not be started. Please check you
# interrupt print jobs.
my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Restarting printing system ..."));
+ _("Restarting printing system..."));
return printer::SIGHUP_daemon($printer->{SPOOLER});
@@ -2221,7 +2221,7 @@ sub setup_default_spooler {
printer::removelocalprintersfromapplications($printer);
# Get the queues of this spooler
{
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
printer::read_configured_queues($printer);
}
# Copy queues from former spooler
@@ -2229,7 +2229,7 @@ sub setup_default_spooler {
# Re-read the printer database (CUPS has additional drivers, PDQ
# has no raw queue)
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database ..."));
+ #my $w = $in->wait_message('', _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
}
# Save spooler choice
@@ -2239,7 +2239,7 @@ sub setup_default_spooler {
sub configure_queue {
my ($printer, $in) = @_;
- my $w = $in->wait_message('', _("Configuring printer \"%s\" ...",
+ my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
$printer->{currentqueue}{queue}));
$printer->{complete} = 1;
printer::configure_queue($printer);
@@ -2252,7 +2252,7 @@ sub install_foomatic {
(!printer::files_exist((qw(/usr/bin/foomatic-configure
/usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm)
)))) {
- my $w = $in->wait_message('', _("Installing Foomatic ..."));
+ my $w = $in->wait_message('', _("Installing Foomatic..."));
$in->do_pkgs->install('foomatic');
}
}
@@ -2318,7 +2318,7 @@ sub main {
# Get the default printer
if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
- my $w = $in->wait_message('', _("Preparing PrinterDrake ..."));
+ my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
$printer->{DEFAULT} = printer::get_default_printer($printer);
if ($printer->{DEFAULT}) {
# If a CUPS system has only remote printers and no default
@@ -2481,11 +2481,11 @@ sub main {
$::expert = !$::expert;
# Read printer database for the new user mode
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database ..."));
+ #my $w = $in->wait_message('', _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
# Re-read printer queues to switch the tree
# structure between expert/normal mode.
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
printer::read_configured_queues($printer);
$cursorpos = "::";
next;
@@ -2786,7 +2786,7 @@ What do you want to modify on this printer?",
configure_queue($printer, $in);
# Delete old queue when it was renamed
if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
- my $w = $in->wait_message('', _("Removing old printer \"%s\" ...", $printer->{OLD_QUEUE}));
+ my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
printer::remove_queue($printer, $printer->{OLD_QUEUE});
# If the default printer was renamed, correct the
# the default printer setting of the spooler
@@ -2838,7 +2838,7 @@ What do you want to modify on this printer?",
if ($in->ask_yesorno('',
_("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
{
- my $w = $in->wait_message('', _("Removing printer \"%s\" ...", $queue));
+ my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
if (printer::remove_queue($printer, $queue)) {
$editqueue = 0;
# Define a new default printer if we have
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-07 05:00:54 +0000