summaryrefslogtreecommitdiffstats
path: root/perl-install/printer
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer')
-rw-r--r--perl-install/printer/printerdrake.pm70
1 files changed, 35 insertions, 35 deletions
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 31b1fc501..e179d5074 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -210,14 +210,14 @@ If some of these measures lead to problems for you, turn this option off, but th
N("IP address of host/network:") &&
$ip =~ /^\s*$/) {
- $in->ask_warn('', N("Host/network IP address missing."));
+ $in->ask_warn(N("Error"), N("Host/network IP address missing."));
return (1,1);
}
if ($hostchoice eq
N("IP address of host/network:") &&
!printer::main::is_network_ip($ip)) {
- $in->ask_warn('',
+ $in->ask_warn(N("Error"),
N("The entered host/network IP is not correct.\n") .
N("Examples for correct IPs:\n") .
"192.168.100.194\n" .
@@ -242,7 +242,7 @@ N("Examples for correct IPs:\n") .
if ($address ne $oldaddress &&
member($address,
@{$printer->{cupsconfig}{clientnetworks}})) {
- $in->ask_warn('',
+ $in->ask_warn(N("Error"),
N("This host/network is already in the list, it cannot be added again.\n"));
if ($hostchoice eq
N("IP address of host/network:")) {
@@ -390,12 +390,12 @@ N("Examples for correct IPs:\n") .
callbacks => {
complete => sub {
if ($ip =~ /^\s*$/) {
- $in->ask_warn('', N("Server IP missing!"));
+ $in->ask_warn(N("Error"), N("Server IP missing!"));
return (1,0);
}
if ($ip !~
/^\s*(\d+\.\d+\.\d+\.\d+)\s*$/) {
- $in->ask_warn('',
+ $in->ask_warn(N("Error"),
N("The entered IP is not correct.\n") .
N("Examples for correct IPs:\n") .
"192.168.100.194\n" .
@@ -408,7 +408,7 @@ N("Examples for correct IPs:\n") .
if ($port !~ /\S/) {
$port = '631';
} elsif ($port !~ /^\s*(\d+)\s*$/) {
- $in->ask_warn('', N("The port number should be an integer!"));
+ $in->ask_warn(N("Error"), N("The port number should be an integer!"));
return (1,1);
} else {
$port = $1;
@@ -418,7 +418,7 @@ N("Examples for correct IPs:\n") .
if ($address ne $oldaddress &&
member($address,
@{$printer->{cupsconfig}{BrowsePoll}})) {
- $in->ask_warn('',
+ $in->ask_warn(N("Error"),
N("This server is already in the list, it cannot be added again.\n"));
return (1,0);
}
@@ -1045,7 +1045,7 @@ sub setup_local_autoscan {
{
complete => sub {
if ($menuchoice eq "") {
- $in->ask_warn('', N("You must enter a device or file name!"));
+ $in->ask_warn(N("Error"), N("You must enter a device or file name!"));
return (1,0);
}
return 0;
@@ -1092,7 +1092,7 @@ sub setup_local_autoscan {
callbacks => {
complete => sub {
unless ($menuchoice ne "") {
- $in->ask_warn('', N("You must choose/enter a printer/device!"));
+ $in->ask_warn(N("Error"), N("You must choose/enter a printer/device!"));
return (1,0);
}
return 0;
@@ -1167,11 +1167,11 @@ N("To use a remote lpd printer, you need to supply the hostname of the printer s
{ label => N("Remote printer name"), val => \$remotequeue } ],
complete => sub {
if ($remotehost eq "") {
- $in->ask_warn('', N("Remote host name missing!"));
+ $in->ask_warn(N("Error"), N("Remote host name missing!"));
return (1,0);
}
if ($remotequeue eq "") {
- $in->ask_warn('', N("Remote printer name missing!"));
+ $in->ask_warn(N("Error"), N("Remote printer name missing!"));
return (1,1);
}
return 0;
@@ -1193,7 +1193,7 @@ complete => sub {
if (defined($modelinfo) &&
$modelinfo->{MANUFACTURER} ne "" &&
$modelinfo->{MODEL} ne "") {
- $in->ask_warn('', N("Detected model: %s %s",
+ $in->ask_warn(N("Information"), N("Detected model: %s %s",
$modelinfo->{MANUFACTURER}, $modelinfo->{MODEL}));
$auto_hpoj = 1;
} else {
@@ -1342,15 +1342,15 @@ sub setup_smb {
allow_empty_list => 1, type => 'combo' }) ],
complete => sub {
if (!is_ip($smbserverip) && $smbserverip ne "") {
- $in->ask_warn('', N("IP address should be in format 1.2.3.4"));
+ $in->ask_warn(N("Error"), N("IP address should be in format 1.2.3.4"));
return (1,1);
}
if ($smbserver eq "" && $smbserverip eq "") {
- $in->ask_warn('', N("Either the server name or the server's IP must be given!"));
+ $in->ask_warn(N("Error"), N("Either the server name or the server's IP must be given!"));
return (1,0);
}
if ($smbshare eq "") {
- $in->ask_warn('', N("Samba share name missing!"));
+ $in->ask_warn(N("Error"), N("Samba share name missing!"));
return (1,2);
}
if ($smbpassword ne "") {
@@ -1450,11 +1450,11 @@ N("To print on a NetWare printer, you need to provide the NetWare print server n
{ label => N("Password"), val => \$ncppassword, hidden => 1 } ],
complete => sub {
unless ($ncpserver ne "") {
- $in->ask_warn('', N("NCP server name missing!"));
+ $in->ask_warn(N("Error"), N("NCP server name missing!"));
return (1,0);
}
unless ($ncpqueue ne "") {
- $in->ask_warn('', N("NCP queue name missing!"));
+ $in->ask_warn(N("Error"), N("NCP queue name missing!"));
return (1,1);
}
return 0;
@@ -1571,11 +1571,11 @@ sub setup_socket {
callbacks => {
complete => sub {
unless ($remotehost ne "") {
- $in->ask_warn('', N("Printer host name or IP missing!"));
+ $in->ask_warn(N("Error"), N("Printer host name or IP missing!"));
return (1,0);
}
unless ($remoteport =~ /^[0-9]+$/) {
- $in->ask_warn('', N("The port number should be an integer!"));
+ $in->ask_warn(N("Error"), N("The port number should be an integer!"));
return (1,1);
}
return 0;
@@ -1661,7 +1661,7 @@ list => [ $printer->{currentqueue}{connect},
], not_edit => 0 }, ],
complete => sub {
unless ($printer->{currentqueue}{connect} =~ /[^:]+:.+/) {
- $in->ask_warn('', N("A valid URI must be entered!"));
+ $in->ask_warn(N("Error"), N("A valid URI must be entered!"));
return (1,0);
}
return 0;
@@ -1707,7 +1707,7 @@ complete => sub {
if (defined($modelinfo) &&
$modelinfo->{MANUFACTURER} ne "" &&
$modelinfo->{MODEL} ne "") {
- $in->ask_warn('', N("Detected model: %s %s",
+ $in->ask_warn(N("Information"), N("Detected model: %s %s",
$modelinfo->{MANUFACTURER},
$modelinfo->{MODEL}));
$auto_hpoj = 1;
@@ -1748,7 +1748,7 @@ N("Here you can specify any arbitrary command line into which the job should be
val => \$commandline }, ],
complete => sub {
unless ($commandline ne "") {
- $in->ask_warn('', N("A command line must be entered!"));
+ $in->ask_warn(N("Error"), N("A command line must be entered!"));
return (1,0);
}
return 0;
@@ -2141,13 +2141,13 @@ sub choose_printer_name {
#cancel => !$printer->{configured}{$queue} ? '' : N("Remove queue"),
callbacks => { complete => sub {
unless ($printer->{currentqueue}{queue} =~ /^\w+$/) {
- $in->ask_warn('', N("Name of printer should contain only letters, numbers and the underscore"));
+ $in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore"));
return (1,0);
}
local $::isWizard = 0;
if ($printer->{configured}{$printer->{currentqueue}{queue}}
&& $printer->{currentqueue}{queue} ne $default &&
- !$in->ask_yesorno('', N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
+ !$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
$printer->{currentqueue}{queue}),
0)) {
return (1,0); # Let the user correct the name
@@ -2407,13 +2407,13 @@ sub installppd {
$ppdfile = $in->ask_file(N("Select PPD file"), "$dir");
last if !$ppdfile;
if (! -r $ppdfile) {
- $in->ask_warn('Printerdrake',
+ $in->ask_warn(N("Error"),
N("The PPD file %s does not exist or is unreadable!",
$ppdfile));
next;
}
if (! printer::main::checkppd($printer, $ppdfile)) {
- $in->ask_warn('Printerdrake',
+ $in->ask_warn(N("Error"),
N("The PPD file %s does not conform with the PPD specifications!",
$ppdfile));
next;
@@ -2830,15 +2830,15 @@ You should make sure that the page size and the ink type/printing mode (if avail
for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
if ($printer->{ARGS}[$i]{type} eq 'int' || $printer->{ARGS}[$i]{type} eq 'float') {
if ($printer->{ARGS}[$i]{type} eq 'int' && $userinputs[$i] !~ /^[\-\+]?[0-9]+$/) {
- $in->ask_warn('', N("Option %s must be an integer number!", $printer->{ARGS}[$i]{comment}));
+ $in->ask_warn(N("Error"), N("Option %s must be an integer number!", $printer->{ARGS}[$i]{comment}));
return (1, $i);
}
if ($printer->{ARGS}[$i]{type} eq 'float' && $userinputs[$i] !~ /^[\-\+]?[0-9\.]+$/) {
- $in->ask_warn('', N("Option %s must be a number!", $printer->{ARGS}[$i]{comment}));
+ $in->ask_warn(N("Error"), N("Option %s must be a number!", $printer->{ARGS}[$i]{comment}));
return (1, $i);
}
if ($userinputs[$i] < $printer->{ARGS}[$i]{min} || $userinputs[$i] > $printer->{ARGS}[$i]{max}) {
- $in->ask_warn('', N("Option %s out of range!", $printer->{ARGS}[$i]{comment}));
+ $in->ask_warn(N("Error"), N("Option %s out of range!", $printer->{ARGS}[$i]{comment}));
return (1, $i);
}
}
@@ -2889,7 +2889,7 @@ sub setasdefault {
# $in->set_help('setupAsDefault') if $::isInstall;
if ($printer->{DEFAULT} eq '' || # We have no default printer,
# so set the current one as default
- $in->ask_yesorno('', N("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0)) { # Ask the user
+ $in->ask_yesorno(N("Printerdrake"), N("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0)) { # Ask the user
$printer->{DEFAULT} = $printer->{QUEUE};
printer::default::set_printer($printer);
}
@@ -2988,10 +2988,10 @@ Printing status:\n%s\n\n", @lpq_output);
It may take some time before the printer starts.\n");
}
if ($printer->{NEW} == 0) {
- $in->ask_warn('',$dialogtext);
+ $in->ask_warn(N("Printerdrake"),$dialogtext);
return 1;
} else {
- $in->ask_yesorno('', $dialogtext . N("Did it work properly?"), 1)
+ $in->ask_yesorno(N("Printerdrake"), $dialogtext . N("Did it work properly?"), 1)
and return 1;
}
} else {
@@ -3229,12 +3229,12 @@ You can also type a new name or skip this printer.",
cancel => N("Skip"),
callbacks => { complete => sub {
unless ($newqueue =~ /^\w+$/) {
- $in->ask_warn('', N("Name of printer should contain only letters, numbers and the underscore"));
+ $in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore"));
return (1,0);
}
if ($printer->{configured}{$newqueue}
&& $newqueue ne $oldqueue &&
- !$in->ask_yesorno('', N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
+ !$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
$newqueue),
0)) {
return (1,0); # Let the user correct the name
@@ -4321,7 +4321,7 @@ sub remove_printer {
# needed.
if ($in->ask_yesorno
- ('', N("Do you really want to remove the printer \"%s\"?", $queue),
+ (N("Warning"), N("Do you really want to remove the printer \"%s\"?", $queue),
1)) {
my $_w = $in->wait_message
(N("Printerdrake"),
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-22 15:18:33 +0000