summaryrefslogtreecommitdiffstats
path: root/perl-install/printer
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer')
-rw-r--r--perl-install/printer/printerdrake.pm40
1 files changed, 38 insertions, 2 deletions
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 5bbcaa4b3..46d542c30 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -25,6 +25,7 @@ sub config_cups {
my ($printer, $security, $in, $upNetwork) = @_;
local $::isWizard = 0;
+ local $::isEmbedded = 0;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
@@ -668,6 +669,7 @@ sub setup_printer_connection {
sub first_time_dialog {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
return 1 if printer::default::get_spooler() || $::isInstall;
my $w = $in->wait_message(N("Printerdrake"), N("Checking your system..."));
@@ -1006,6 +1008,7 @@ sub generate_queuename {
sub wizard_welcome {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
my $ret;
my $autodetectlocal = 0;
my $autodetectnetwork = 0;
@@ -1103,6 +1106,7 @@ If you have printer(s) connected to this machine, Please plug it/them in on this
sub wizard_congratulations {
my ($in) = @_;
+ local $::isEmbedded = 0;
if ($in) {
$in->ask_okcancel(N("Add a new printer"),
N("
@@ -1116,6 +1120,7 @@ If you want to add, remove, or rename a printer, or if you want to change the de
sub setup_local_autoscan {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
my $queue = $printer->{OLD_QUEUE};
my $expert_or_modify = $printer->{expert} || !$printer->{NEW};
my $do_auto_detect =
@@ -1388,6 +1393,7 @@ sub setup_local_autoscan {
sub setup_lpd {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
@@ -1467,6 +1473,7 @@ complete => sub {
sub setup_smb {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
@@ -1673,6 +1680,7 @@ Do you really want to continue setting up this printer as you are doing now?"),
sub setup_ncp {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
@@ -1747,6 +1755,7 @@ complete => sub {
sub setup_socket {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# Check whether the network functionality is configured and
# running
if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
@@ -1921,6 +1930,7 @@ sub setup_socket {
sub setup_uri {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('setupURI') if $::isInstall;
if ($printer->{AUTODETECT} && $printer->{SPOOLER} eq 'cups') {
my $_w = $in->wait_message(N("Printerdrake"),
@@ -2045,6 +2055,7 @@ complete => sub {
sub setup_postpipe {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('setupPostpipe') if $::isInstall;
my $uri;
my $commandline;
@@ -2080,6 +2091,7 @@ sub setup_common {
my ($printer, $in, $makemodel, $device, $do_auto_detect, @autodetected) = @_;
+ local $::isEmbedded = 0;
#- Check whether the printer is an HP multi-function device and
#- configure HPOJ if it is one
@@ -2667,6 +2679,7 @@ sub setup_common {
sub choose_printer_name {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# Name, description, location
# $in->set_help('setupPrinterName') if $::isInstall;
my $default = $printer->{currentqueue}{queue};
@@ -2709,6 +2722,7 @@ N("Every printer needs a name (for example \"printer\"). The Description and Loc
sub get_db_entry {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
#- Read the printer driver database if necessary
if (keys %printer::main::thedb == 0) {
my $_w = $in->wait_message(N("Printerdrake"),
@@ -2823,6 +2837,7 @@ sub get_db_entry {
sub is_model_correct {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('chooseModel') if $::isInstall;
my $dbentry = $printer->{DBENTRY};
if (!$dbentry) {
@@ -2850,6 +2865,7 @@ For your printer Printerdrake has found:
sub choose_model {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
if (keys %printer::main::thedb == 0) {
@@ -2906,6 +2922,7 @@ Please check whether Printerdrake did the auto-detection of your printer model c
sub installppd {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# Install a manufacturer-supplied PPD file
# The dialogs to choose the PPD file should appear as extra
@@ -2998,6 +3015,7 @@ my %drv_x125_options = (
sub get_printer_info {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
my $queue = $printer->{OLD_QUEUE};
my $oldchoice = $printer->{OLD_CHOICE};
my $newdriver = 0;
@@ -3271,6 +3289,7 @@ sub unhexify {
sub setup_options {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
my @simple_options =
("PageSize", # Media properties
"MediaType",
@@ -3554,6 +3573,7 @@ You should make sure that the page size and the ink type/printing mode (if avail
sub setasdefault {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('setupAsDefault') if $::isInstall;
if ($printer->{DEFAULT} eq '' || # We have no default printer,
# so set the current one as default
@@ -3565,6 +3585,7 @@ sub setasdefault {
sub print_testpages {
my ($printer, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('printTestPages') if $::isInstall;
# print test pages
my $res2 = 0;
@@ -3685,6 +3706,7 @@ It may take some time before the printer starts.\n");
sub printer_help {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
my $spooler = $printer->{SPOOLER};
$spooler = "cups" if $spooler eq "rcups";
my $queue = $printer->{QUEUE};
@@ -3896,6 +3918,7 @@ sub photocard_help {
sub copy_queues_from {
my ($printer, $in, $oldspooler) = @_;
+ local $::isEmbedded = 0;
# $in->set_help('copyQueues') if $::isInstall;
my $newspooler = $printer->{SPOOLER};
my @oldqueues;
@@ -4007,6 +4030,7 @@ You can also type a new name or skip this printer.",
sub start_network {
my ($in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
my $_w = $in->wait_message(N("Printerdrake"),
N("Starting network..."));
if ($::isInstall) {
@@ -4039,6 +4063,7 @@ sub check_network {
my ($printer, $in, $upNetwork, $b_dontconfigure) = @_;
+ local $::isEmbedded = 0;
# Any additional dialogs caused by this subroutine should appear as
# extra windows and not embedded in the "Add printer" wizard.
local $::isWizard = 0;
@@ -4113,6 +4138,7 @@ sub security_check {
# user whether he really wants to configure printing.
my ($spooler, $security, $o_in) = @_;
+ local $::isEmbedded = 0;
# Any additional dialogs caused by this subroutine should appear as
# extra windows and not embedded in the "Add printer" wizard.
local $::isWizard = 0;
@@ -4163,6 +4189,7 @@ sub start_spooler_on_boot {
# PDQ has no daemon, so nothing needs to be started :
return unless $b_service;
+ local $::isEmbedded = 0;
# Any additional dialogs caused by this subroutine should appear as
# extra windows and not embedded in the "Add printer" wizard.
local $::isWizard = 0;
@@ -4186,6 +4213,7 @@ Do you want to have the automatic starting of the printing system turned on agai
sub install_spooler {
# installs the default spooler and start its daemon
my ($printer, $security, $do_pkgs, $o_in, $o_upNetwork, $b_silentspooleronboot) = @_;
+ local $::isEmbedded = 0;
return 1 if $::testing;
my $spooler = $printer->{SPOOLER};
# If the user refuses to install the spooler in high or paranoid
@@ -4283,6 +4311,7 @@ sub install_spooler {
sub assure_remote_server_is_set {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
# Check if a remote CUPS server is specified
if (!$printer->{remote_cups_server}) {
my ($daemonless_cups, $remote_cups_server) =
@@ -4342,6 +4371,7 @@ sub assure_default_printer_is_set {
sub set_cups_daemon_mode {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
my ($modechoice, $daemonless_cups, $remote_cups_server);
if ($in->ask_from_
@@ -4405,6 +4435,7 @@ sub set_cups_daemon_mode {
sub setup_default_spooler {
my ($printer, $security, $in, $upNetwork) = @_;
+ local $::isEmbedded = 0;
my $oldspooler = $printer->{SPOOLER};
$printer->{SPOOLER} ||= 'cups';
my @spoolerlist = printer::main::spooler();
@@ -4451,6 +4482,7 @@ sub setup_default_spooler {
sub configure_queue {
my ($printer, $in) = @_;
+ local $::isEmbedded = 0;
my $_w = $in->wait_message(N("Printerdrake"),
N("Configuring printer \"%s\"...",
$printer->{currentqueue}{queue}))
@@ -4469,6 +4501,7 @@ sub configure_queue {
sub install_foomatic {
my ($in) = @_;
+ local $::isEmbedded = 0;
if (!$::testing &&
!files_exist(qw(/usr/bin/foomatic-configure
/usr/bin/foomatic-rip
@@ -4490,6 +4523,7 @@ sub install_foomatic {
sub wizard_close {
my ($in, $mode) = @_;
+ local $::isEmbedded = 0;
# Leave wizard mode with congratulations screen if $mode = 1
$::Wizard_no_previous = 1;
$::Wizard_no_cancel = 1;
@@ -4852,15 +4886,17 @@ sub add_printer {
spooler => $printer->{SPOOLER},
};
#- Do all the configuration steps for a new queue
- step_0:
- #if (!$::isEmbedded && !$::isInstall &&
if (!$::isInstall &&
$in->isa('interactive::gtk')) {
+ local $::isEmbedded = 0;
+ undef $::WizardTable;
+ undef $::WizardWindow;
# Enter wizard mode (only after installation)
$::Wizard_pix_up = "printerdrake.png";
$::Wizard_title = N("Add a new printer");
$::isWizard = 1;
# Wizard welcome screen
+ step_0:
$::Wizard_no_previous = 1;
undef $::Wizard_no_cancel; undef $::Wizard_finished;
wizard_welcome($printer, $in, $upNetwork) or do {
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-24 18:40:46 +0000