summaryrefslogtreecommitdiffstats
path: root/perl-install/printer/main.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer/main.pm')
-rw-r--r--perl-install/printer/main.pm3010
1 files changed, 0 insertions, 3010 deletions
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
deleted file mode 100644
index 37e2952bb..000000000
--- a/perl-install/printer/main.pm
+++ /dev/null
@@ -1,3010 +0,0 @@
-package printer::main;
-
-# $Id$
-
-use strict;
-
-use common;
-use run_program;
-use printer::data;
-use printer::services;
-use printer::default;
-use printer::cups;
-use printer::detect;
-use handle_configs;
-use services;
-use lang;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(%printer_type %printer_type_inv);
-
-our %printer_type = (
- N("Local printer") => "LOCAL",
- N("Remote printer") => "REMOTE",
- N("Printer on remote CUPS server") => "CUPS",
- N("Printer on remote lpd server") => "LPD",
- N("Network printer (TCP/Socket)") => "SOCKET",
- N("Printer on SMB/Windows server") => "SMB",
- N("Printer on NetWare server") => "NCP",
- N("Enter a printer device URI") => "URI",
- N("Pipe job into a command") => "POSTPIPE"
-);
-
-our %printer_type_inv = reverse %printer_type;
-
-our %thedb;
-our %linkedppds;
-
-our $hplipdevicesdb;
-
-# Translation of the "(recommended)" in printer driver entries
-our $recstr = N("recommended");
-our $precstr = "($recstr)";
-our $sprecstr = quotemeta($precstr);
-
-#------------------------------------------------------------------------------
-
-sub spooler() {
- # LPD is taken from the menu for the moment because the classic LPD is
- # highly unsecure. Depending on how the GNU lpr development is going on
- # LPD support can be reactivated by uncommenting the following line.
-
- #return @spooler_inv{qw(cups lpd lprng pdq)};
-
- # LPRng is not officially supported any more since version 9.0 of
- # this distribution, so show it only in the spooler menu when it
- # was manually installed.
-
- # PDQ is not officially supported any more since version 9.1, so
- # show it only in the spooler menu when it was manually installed.
-
- return map { $spoolers{$_}{long_name} } ('cups', 'rcups' ,
- if_(files_exist(qw(/usr/bin/pdq)), 'pdq'),
- if_(files_exist("/usr/$lib/filters/lpf", "/usr/sbin/lpd"), 'lprng'));
-}
-
-sub printer_type($) {
- my ($printer) = @_;
- for ($printer->{SPOOLER}) {
- /cups/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($printer->{expert}, qw(URI))};
- /lpd/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))};
- /lprng/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))};
- /pdq/ and return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($printer->{expert}, qw(URI))};
- /rcups/ and return ();
- }
-}
-
-sub SIGHUP_daemon {
- my ($service) = @_;
- if ($service eq "cupsd") { $service = "cups" }
- # PDQ and remote CUPS have no daemons, exit.
- if (($service eq "pdq") || ($service eq "rcups")) { return 1 }
- # CUPS needs auto-correction for its configuration
- run_program::rooted($::prefix, "/usr/sbin/correctcupsconfig") if $service eq "cups";
- # Name of the daemon
- my %daemons = (
- "lpr" => "lpd",
- "lpd" => "lpd",
- "lprng" => "lpd",
- "cups" => "cupsd",
- "devfs" => "devfsd",
- );
- my $daemon = $daemons{$service};
- $daemon = $service unless defined $daemon;
-# if ($service eq "cups") {
-# # The current CUPS (1.1.13) dies on SIGHUP, do the normal restart.
-# printer::services::restart($service);
-# # CUPS needs some time to come up.
-# printer::services::wait_for_cups();
-# } else {
-
- # Send the SIGHUP
- run_program::rooted($::prefix, "/usr/bin/killall", "-HUP", $daemon);
- if ($service eq "cups") {
- # CUPS needs some time to come up.
- printer::services::wait_for_cups();
- }
-
- return 1;
-}
-
-
-sub assure_device_is_available_for_cups {
- # Checks whether CUPS already "knows" a certain port, it does not
- # know it usually when the appropriate kernel module is loaded
- # after CUPS was started or when the printer is turned on after
- # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
- # on devices which it does not know, it points these queues to
- # file:/dev/null instead. Restart CUPS if necessary to assure that
- # CUPS knows the device.
- my ($device) = @_;
- my $sdevice = handle_configs::searchstr($device);
- my ($result, $i);
- # USB printers get special model-dependent URLs in "lpinfo -v" here
- # checking is complicated, so we simply restart CUPS then and ready.
- if ($device =~ /usb/) {
- $result = printer::services::restart("cups");
- return 1;
- }
- my $maxattempts = 3;
- for ($i = 0; $i < $maxattempts; $i++) {
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; /usr/sbin/lpinfo -v" |') or
- die 'Could not run "lpinfo"!';
- while (my $line = <$F>) {
- if ($line =~ /$sdevice/) { # Found a line containing the device
- # name, so CUPS knows it.
- close $F;
- return 1;
- }
- }
- close $F;
- $result = printer::services::restart("cups");
- }
- return $result;
-}
-
-
-sub spooler_in_security_level {
- # Was the current spooler already added to the current security level?
- my ($spooler, $level) = @_;
- my $sp;
- $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler;
- my $file = "$::prefix/etc/security/msec/server.$level";
- if (-f $file) {
- open(my $F, "< $file") or return 0;
- while (my $line = <$F>) {
- if ($line =~ /^\s*$sp\s*$/) {
- close $F;
- return 1;
- }
- }
- close $F;
- }
- return 0;
-}
-
-sub add_spooler_to_security_level {
- my ($spooler, $level) = @_;
- my $sp;
- $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler;
- my $file = "$::prefix/etc/security/msec/server.$level";
- if (-f $file) {
- eval { append_to_file($file, "$sp\n") } or return 0;
- }
- return 1;
-}
-
-sub pdq_panic_button {
- my $setting = $_[0];
- if (-f "$::prefix/usr/sbin/pdqpanicbutton") {
- run_program::rooted($::prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
- or die "Could not $setting PDQ panic buttons!";
- }
-}
-
-sub copy_printer_params($$) {
- my ($from, $to) = @_;
- map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from;
- #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
- my ($prefix) = @_;
- my $printer = {};
-
- $::prefix = $prefix;
-
- # Initialize $printer data structure
- resetinfo($printer);
-
- return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
- my ($printer) = @_;
- $printer->{QUEUE} = "";
- $printer->{OLD_QUEUE} = "";
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = {};
- $printer->{DBENTRY} = "";
- $printer->{DEFAULT} = "";
- $printer->{currentqueue} = {};
- # -check which printing system was used previously and load the information
- # -about its queues
- read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
- my ($printer) = @_;
- my @QUEUES;
- # Get the default spooler choice from the config file
- $printer->{SPOOLER} ||= printer::default::get_spooler();
- if (!$printer->{SPOOLER}) {
- #- Find the first spooler where there are queues
- foreach my $spooler (qw(rcups cups pdq lprng lpd)) {
- #- Is the spooler's daemon running?
- my $service = $spooler;
- if ($service eq "lprng") {
- $service = "lpd";
- }
- if (($service ne "pdq") && ($service ne "rcups")) {
- next unless services::is_service_running($service);
- # daemon is running, spooler found
- $printer->{SPOOLER} = $spooler;
- }
- #- poll queue info
- if ($service ne "rcups") {
- open(my $F, ($::testing ?
- $::prefix : "chroot $::prefix/ ") .
- "foomatic-configure -P -q -s $spooler |") or
- die "Could not run foomatic-configure";
- eval join('', <$F>);
- close $F;
- }
- if ($service eq "pdq") {
- #- Have we found queues? PDQ has no damon, so we consider
- #- it in use when there are defined printer queues
- if ($#QUEUES != -1) {
- $printer->{SPOOLER} = $spooler;
- last;
- }
- } elsif ($service eq "rcups") {
- #- In daemon-less CUPS mode there are no local queues,
- #- we can only recognize it by a server entry in
- #- /etc/cups/client.conf
- my ($daemonless_cups, $remote_cups_server) =
- printer::main::read_client_conf();
- if ($daemonless_cups) {
- $printer->{SPOOLER} = $spooler;
- $printer->{remote_cups_server} = $remote_cups_server;
- last;
- }
- } else {
- #- For other spoolers we have already found a running
- #- daemon when we have arrived here
- last;
- }
- }
- } else {
- if ($printer->{SPOOLER} ne "rcups") {
- #- Poll the queues of the current default spooler
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "foomatic-configure -P -q -s $printer->{SPOOLER} -r |") or
- die "Could not run foomatic-configure";
- eval join('', <$F>);
- close $F;
- } else {
- my ($_daemonless_cups, $remote_cups_server) =
- printer::main::read_client_conf();
- $printer->{remote_cups_server} = $remote_cups_server;
- }
- }
- $printer->{configured} = {};
- my $i;
- my $N = $#QUEUES + 1;
- for ($i = 0; $i < $N; $i++) {
- # Set the default printer
- $printer->{DEFAULT} = $QUEUES[$i]{queuedata}{queue} if
- $QUEUES[$i]{queuedata}{default};
- # Advance to the next entry if the current is a remotely defined
- # printer
- next if $QUEUES[$i]{queuedata}{remote};
- # Add an entry for a locally defined queue
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}} =
- $QUEUES[$i];
- if (!$QUEUES[$i]{make} || !$QUEUES[$i]{model}) {
- if ($printer->{SPOOLER} eq "cups") {
- $printer->{OLD_QUEUE} = $QUEUES[$i]{queuedata}{queue};
- my $descr = get_descr_from_ppd($printer);
- if ($descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/) {
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1;
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2;
- }
- # Read out which PPD file was originally used to set up this
- # queue
- if (open(my $F, "< $::prefix/etc/cups/ppd/$QUEUES[$i]{queuedata}{queue}.ppd")) {
- while (my $line = <$F>) {
- if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = $1;
- }
- }
- close $F;
- # Mark that we have a CUPS queue but do not know the
- # name the PPD file in /usr/share/cups/model
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} ||= '1';
- # Mark that our PPD file is not a Foomatic one
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = "PPD";
- } else {
- # We do not have a PPD file for this queue
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = undef;
- # No PPD found? Then we have a raw queue
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = "raw";
- }
- $printer->{OLD_QUEUE} = "";
- }
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= "";
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= N("Unknown model");
- } else {
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} = $QUEUES[$i]{make};
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} = $QUEUES[$i]{model};
- }
- # Fill in "options" field
- if (my $args = $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args}) {
- my @options;
- foreach my $arg (@$args) {
- push(@options, "-o");
- my $optstr = $arg->{name} . "=" . $arg->{default};
- push(@options, $optstr);
- }
- @{$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{options}} = @options;
- }
- # Construct an entry line for tree view in main window of
- # printerdrake
- make_menuentry($printer, $QUEUES[$i]{queuedata}{queue});
- }
-}
-
-sub make_menuentry {
- my ($printer, $queue) = @_;
- my $spooler = $spoolers{$printer->{SPOOLER}}{short_name};
- my $connect = $printer->{configured}{$queue}{queuedata}{connect};
- my $localremote = N("Configured on this machine");
- my $make = $printer->{configured}{$queue}{queuedata}{make};
- my $model = $printer->{configured}{$queue}{queuedata}{model};
- my $connection;
- if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) {
- my $number = $2;
- $connection = N(" on parallel port #%s", $number);
- } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) {
- my $number = $2;
- $connection = N(", USB printer #%s", $number);
- } elsif ($connect =~ m!^usb://!) {
- $connection = N(", USB printer");
- } elsif ($connect =~ m!^hp:/(.+?)$!) {
- my $hplipdevice = $1;
- if ($hplipdevice =~ m!^par/!) {
- $connection = N(", HP printer on a parallel port");
- } elsif ($hplipdevice =~ m!^usb/!) {
- $connection = N(", HP printer on USB");
- } elsif ($hplipdevice =~ m!^net/!) {
- $connection = N(", HP printer on HP JetDirect");
- } else {
- $connection = N(", HP printer");
- }
- } elsif ($connect =~ m!^ptal://?(.+?)$!) {
- my $ptaldevice = $1;
- if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
- my $number = $1;
- $connection = N(", multi-function device on parallel port #%s",
- $number);
- } elsif ($ptaldevice =~ /^mlc:par:/) {
- $connection = N(", multi-function device on a parallel port");
- } elsif ($ptaldevice =~ /^mlc:usb:/) {
- $connection = N(", multi-function device on USB");
- } elsif ($ptaldevice =~ /^hpjd:/) {
- $connection = N(", multi-function device on HP JetDirect");
- } else {
- $connection = N(", multi-function device");
- }
- } elsif ($connect =~ m!^file:(.+)$!) {
- my $file = $1;
- $connection = N(", printing to %s", $file);
- } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
- my ($server, $printer) = ($1, $2);
- $connection = N(" on LPD server \"%s\", printer \"%s\"", $server, $printer);
- } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
- my ($host, $port) = ($1, $2);
- $connection = N(", TCP/IP host \"%s\", port %s", $host, $port);
- } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) {
- my ($server, $share) = ($1, $2);
- $connection = N(" on SMB/Windows server \"%s\", share \"%s\"", $server, $share);
- } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) {
- my ($server, $printer) = ($1, $2);
- $connection = N(" on Novell server \"%s\", printer \"%s\"", $server, $printer);
- } elsif ($connect =~ m!^postpipe:(.+)$!) {
- my $command = $1;
- $connection = N(", using command %s", $command);
- } else {
- $connection = ($printer->{expert} ? ", URI: $connect" : "");
- }
- my $sep = "!";
- $printer->{configured}{$queue}{queuedata}{menuentry} =
- ($printer->{expert} ? "$spooler$sep" : "") .
- "$localremote$sep$queue: $make $model$connection";
-}
-
-sub connectionstr {
- my ($connect) = @_;
- my $connection;
- if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) {
- my $number = $2;
- $connection = N("Parallel port #%s", $number);
- } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) {
- my $number = $2;
- $connection = N("USB printer #%s", $number);
- } elsif ($connect =~ m!^usb://!) {
- $connection = N("USB printer");
- } elsif ($connect =~ m!^hp:/(.+?)$!) {
- my $hplipdevice = $1;
- if ($hplipdevice =~ m!^par/!) {
- $connection = N("HP printer on a parallel port");
- } elsif ($hplipdevice =~ m!^usb/!) {
- $connection = N("HP printer on USB");
- } elsif ($hplipdevice =~ m!^net/!) {
- $connection = N("HP printer on HP JetDirect");
- } else {
- $connection = N("HP printer");
- }
- } elsif ($connect =~ m!^ptal://?(.+?)$!) {
- my $ptaldevice = $1;
- if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
- my $number = $1;
- $connection = N("Multi-function device on parallel port #%s",
- $number);
- } elsif ($ptaldevice =~ /^mlc:par:/) {
- $connection = N("Multi-function device on a parallel port");
- } elsif ($ptaldevice =~ /^mlc:usb:/) {
- $connection = N("Multi-function device on USB");
- } elsif ($ptaldevice =~ /^hpjd:/) {
- $connection = N("Multi-function device on HP JetDirect");
- } else {
- $connection = N("Multi-function device");
- }
- } elsif ($connect =~ m!^file:(.+)$!) {
- my $file = $1;
- $connection = N("Prints into %s", $file);
- } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
- my ($server, $port) = ($1, $2);
- $connection = N("LPD server \"%s\", printer \"%s\"", $server, $port);
- } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
- my ($host, $port) = ($1, $2);
- $connection = N("TCP/IP host \"%s\", port %s", $host, $port);
- } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) {
- my ($server, $share) = ($1, $2);
- $connection = N("SMB/Windows server \"%s\", share \"%s\"", $server, $share);
- } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! ||
- $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) {
- my ($server, $share) = ($1, $2);
- $connection = N("Novell server \"%s\", printer \"%s\"", $server, $share);
- } elsif ($connect =~ m!^postpipe:(.+)$!) {
- my $command = $1;
- $connection = N("Uses command %s", $command);
- } else {
- $connection = N("URI: %s", $connect);
- }
- return $connection;
-}
-
-sub read_printer_db {
-
- my ($printer, $spooler, $newppd) = @_;
-
- # If a $newppd is supplied, we return the key of the DB entry which
- # is for this file. This way we can pre-select a freshly added PPD in
- # the model/driver list.
-
- # No local queues available in daemon-less CUPS mode
- return 1 if $spooler eq "rcups";
-
- my $DBPATH; #- do not have to do close ... and do not modify globals at least
- # Generate the Foomatic printer/driver overview
- open($DBPATH, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-#
- "foomatic-configure -O -q |") or
- die "Could not run foomatic-configure";
-
- %linkedppds = ();
- my $entry = {};
- @{$entry->{drivers}} = ();
- my $inentry = 0;
- my $indrivers = 0;
- my $inppds = 0;
- my $inppd = 0;
- my $inautodetect = 0;
- my $autodetecttype = "";
- my $ppds = {};
- my $ppddriver = "";
- my $ppdfile = "";
- my $ppdentry = "";
- local $_;
- while (<$DBPATH>) {
- chomp;
- if ($inentry) {
- # We are inside a printer entry
- if ($indrivers) {
- # We are inside the drivers block of a printers entry
- if (m!^\s*</drivers>\s*$!) {
- # End of drivers block
- $indrivers = 0;
- } elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
- push @{$entry->{drivers}}, $1;
- }
- } elsif ($inppds) {
- # We are inside the ppds block of a printers entry
- if ($inppd) {
- # We are inside a PPD entry in the ppds block
- if (m!^\s*</ppd>\s*$!) {
- # End of ppds block
- $inppd = 0;
- if ($ppddriver && $ppdfile) {
- $ppds->{$ppddriver} = $ppdfile;
- }
- $ppddriver = "";
- $ppdfile = "";
- } elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
- $ppddriver = $1;
- } elsif (m!^\s*<ppdfile>(.+)</ppdfile>\s*$!) {
- $ppdfile = $1;
- }
- } else {
- if (m!^\s*</ppds>\s*$!) {
- # End of ppds block
- $inppds = 0;
- } elsif (m!^\s*<ppd>\s*$!) {
- $inppd = 1;
- }
- }
- } elsif ($inautodetect) {
- # We are inside the autodetect block of a printers entry
- # All entries inside this block will be ignored
- if ($autodetecttype) {
- if (m!^.*</$autodetecttype>\s*$!) {
- # End of general, parallel, USB, or SNMP section
- $autodetecttype = "";
- } elsif (m!^\s*<manufacturer>\s*([^<>]+)\s*</manufacturer>\s*$!) {
- # Manufacturer
- $entry->{devidmake} = $1;
- } elsif (m!^\s*<model>\s*([^<>]+)\s*</model>\s*$!) {
- # Model
- $entry->{devidmodel} = $1;
- } elsif (m!^\s*<description>\s*([^<>]+)\s*</description>\s*$!) {
- # Description
- $entry->{deviddesc} = $1;
- } elsif (m!^\s*<commandset>\s*([^<>]+)\s*</commandset>\s*$!) {
- # Command set
- $entry->{devidcmdset} = $1;
- } elsif (m!^\s*<ieee1284>\s*([^<>]+)\s*</ieee1284>\s*$!) {
- # Full ID string
- my $idstr = $1;
- $idstr =~ m!(MFG|MANUFACTURER):([^;]+);!i
- and $entry->{devidmake} = $2;
- $idstr =~ m!(MDL|MODEL):([^;]+);!i
- and $entry->{devidmodel} = $2;
- $idstr =~ m!(DES|DESCRIPTION):([^;]+);!i
- and $entry->{deviddesc} = $2;
- $idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i
- and $entry->{devidcmdset} = $2;
- }
- } else {
- if (m!^.*</autodetect>\s*$!) {
- # End of autodetect block
- $inautodetect = 0;
- } elsif (m!^\s*<(general|parallel|usb|snmp)>\s*$!) {
- # Beginning of parallel, USB, or SNMP section
- $autodetecttype = $1;
- }
- }
- } else {
- if (m!^\s*</printer>\s*$!) {
- # entry completed
- $inentry = 0;
- # Expert mode:
- # Make one database entry per driver with the entry name
- # manufacturer|model|driver
- if ($printer->{expert}) {
- foreach my $driver (@{$entry->{drivers}}) {
- my $driverstr;
- if ($driver eq "Postscript") {
- $driverstr = "PostScript";
- } else {
- $driverstr = "GhostScript + $driver";
- }
- if ($driver eq $entry->{defaultdriver}) {
- $driverstr .= " $precstr";
- }
- $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
- $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
- $entry->{ENTRY} =~
- s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
- $entry->{driver} = $driver;
- if (defined($ppds->{$driver})) {
- $entry->{ppd} = $ppds->{$driver};
- $ppds->{$driver} =~ m!([^/]+)$!;
- push(@{$linkedppds{$1}}, $entry->{ENTRY});
- } else {
- undef $entry->{ppd};
- }
- # Duplicate contents of $entry because it is multiply entered to the database
- map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
- }
- } else {
- # Recommended mode
- # Make one entry per printer, with the recommended
- # driver (manufacturerer|model)
- $entry->{ENTRY} = "$entry->{make}|$entry->{model}";
- $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
- $entry->{ENTRY} =~
- s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
- if (($entry->{defaultdriver}) &&
- (member($entry->{defaultdriver},
- @{$entry->{drivers}}))) {
- my $driver = $entry->{defaultdriver};
- $entry->{driver} = $driver;
- if (defined($ppds->{$driver})) {
- $entry->{ppd} = $ppds->{$driver};
- $ppds->{$driver} =~ m!([^/]+)$!;
- push(@{$linkedppds{$1}}, $entry->{ENTRY});
- } else {
- undef $entry->{ppd};
- }
- map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
- }
- }
- $entry = {};
- @{$entry->{drivers}} = ();
- $ppds = {};
- } elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
- # Foomatic printer ID
- $entry->{printer} = $1;
- } elsif (m!^\s*<make>(.+)</make>\s*$!) {
- # Printer manufacturer
- $entry->{make} = uc($1);
- } elsif (m!^\s*<model>(.+)</model>\s*$!) {
- # Printer model
- $entry->{model} = $1;
- } elsif (m!<driver>(.+)</driver>!) {
- # Printer default driver
- $entry->{defaultdriver} = $1;
- } elsif (m!^\s*<drivers>\s*$!) {
- # Drivers block
- $indrivers = 1;
- } elsif (m!^\s*<ppds>\s*$!) {
- # PPDs block
- $inppds = 1;
- } elsif (m!^\s*<autodetect>\s*$!) {
- # Autodetect block
- $inautodetect = 1;
- }
- }
- } else {
- if (m!^\s*<printer>\s*$!) {
- # new entry
- $inentry = 1;
- }
- }
- }
- close $DBPATH;
-
- # Add raw queue
- $entry->{ENTRY} = N("Raw printer (No driver)");
- $entry->{driver} = "raw";
- $entry->{make} = "";
- $entry->{model} = N("Unknown model");
- $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} foreach keys %$entry;
-
- #- Load CUPS driver database if CUPS is used as spooler
- if ($spooler && $spooler eq "cups") {
- $ppdentry = poll_ppd_base($printer, $newppd);
- }
-
- #my @entries_db_short = sort keys %printer::thedb;
- #%descr_to_db = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
- #%descr_to_help = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
- #@entry_db_description = keys %descr_to_db;
- #db_to_descr = reverse %descr_to_db;
-
- return $ppdentry if $newppd;
-
-}
-
-sub read_foomatic_options ($) {
- my ($printer) = @_;
- # Generate the option data for the chosen printer/driver combo
- my $COMBODATA;
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "foomatic-configure -P -q -p $printer->{currentqueue}{printer}" .
- " -d $printer->{currentqueue}{driver}" .
- ($printer->{OLD_QUEUE} ?
- " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
- ($printer->{SPECIAL_OPTIONS} ?
- " $printer->{SPECIAL_OPTIONS}" : "")
- . " |") or
- die "Could not run foomatic-configure";
- eval join('', (<$F>));
- close $F;
- # Return the arguments field
- return $COMBODATA->{args};
-}
-
-sub read_ppd_options ($) {
- my ($printer) = @_;
- # Generate the option data for a given PPD file
- my $COMBODATA;
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "foomatic-configure -P -q" .
- if_($printer->{currentqueue}{ppd} &&
- ($printer->{currentqueue}{ppd} ne '1'),
- " --ppd \'" . ($printer->{currentqueue}{ppd} !~ m!^/! ?
- "/usr/share/cups/model/" : "") .
- $printer->{currentqueue}{ppd} . "\'") .
- ($printer->{OLD_QUEUE} ?
- " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
- ($printer->{SPECIAL_OPTIONS} ?
- " $printer->{SPECIAL_OPTIONS}" : "")
- . " |") or
- die "Could not run foomatic-configure";
- eval join('', (<$F>));
- close $F;
- # Return the arguments field
- return $COMBODATA->{args};
-}
-
-sub set_cups_special_options {
- my ($printer, $queue) = @_;
- # Set some special CUPS options
- my @lpoptions = cat_("$::prefix/etc/cups/lpoptions");
- # If nothing is already configured, set text file borders of half
- # an inch so nothing of the text gets cut off by unprintable
- # borders. Do this only when the driver is not Gutenprint or HPIJS, as
- # both drivers decent border settings are already done and with
- # Gutenprint this will even break PostScript printing
- if ((($queue eq $printer->{currentqueue}{$queue}) &&
- (($printer->{currentqueue}{driver} =~
- /(guten.*print|hpijs|hplip)/i) ||
- ($printer->{currentqueue}{ppd} =~
- /(guten.*print|hpijs|hplip)/i))) ||
- ((defined($printer->{configured}{$queue})) &&
- (($printer->{configured}{$queue}{queuedata}{driver} =~
- /(guten.*print|hpijs|hplip)/i) ||
- ($printer->{configured}{$queue}{queuedata}{ppd} =~
- /(guten.*print|hpijs|hplip)/i))) ||
- (($printer->{SPOOLER} eq "cups") &&
- (-r "$::prefix/etc/cups/ppd/$queue.ppd") &&
- (`egrep -ic '(gutenprint|hpijs|hplip)' $::prefix/etc/cups/ppd/$queue.ppd` > 2))) {
- # Remove page margin settings
- foreach (@lpoptions) {
- s/\s*page-(top|bottom|left|right)=\S+//g if /$queue/;
- }
- output("$::prefix/etc/cups/lpoptions", @lpoptions);
- } else {
- if (!any { /$queue.*\spage-(top|bottom|left|right)=/ } @lpoptions) {
- run_program::rooted($::prefix, "lpoptions",
- "-p", $queue,
- "-o", "page-top=36", "-o", "page-bottom=36",
- "-o", "page-left=36", "-o page-right=36");
- }
- }
- # Let images fill the whole page by default and let text be word-wrapped
- # and printed in a slightly smaller font
- if (!any { /$queue.*\s(scaling|natural-scaling|ppi)=/ } @lpoptions) {
- run_program::rooted($::prefix, "lpoptions",
- "-p", $queue,
- "-o", "scaling=100");
- }
- if (!any { /$queue.*\s(cpi|lpi)=/ } @lpoptions) {
- run_program::rooted($::prefix, "lpoptions",
- "-p", $queue,
- "-o", "cpi=12", "-o", "lpi=7", "-o", "wrap");
- }
- return 1;
-}
-
-my %sysconfig = getVarsFromSh("$::prefix/etc/sysconfig/printing");
-
-sub set_cups_autoconf {
- my ($autoconf) = @_;
- $sysconfig{CUPS_CONFIG} = $autoconf ? "automatic" : "manual";
- setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig);
- # Restart CUPS
- printer::services::restart("cups") if $autoconf;
- return 1;
-}
-
-sub get_cups_autoconf() { $sysconfig{CUPS_CONFIG} ne 'manual' ? 1 : 0 }
-
-sub set_usermode {
- my ($usermode) = @_;
- $sysconfig{USER_MODE} = $usermode ? "expert" : "recommended";
- setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig) if !$::testing;
- return $usermode;
-}
-
-sub get_usermode() { $sysconfig{USER_MODE} eq 'expert' ? 1 : 0 }
-
-sub set_auto_admin {
- my ($printer) = @_;
- $sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED} =
- $printer->{enablequeuesonnewprinter} ? "yes" : "no";
- $sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED} =
- $printer->{autoqueuesetuponnewprinter} ? "yes" : "no";
- $sysconfig{ENABLE_QUEUES_ON_SPOOLER_START} =
- $printer->{enablequeuesonspoolerstart} ? "yes" : "no";
- $sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START} =
- $printer->{autoqueuesetuponstart} ? "yes" : "no";
- $sysconfig{AUTO_SETUP_QUEUES_MODE} =
- $printer->{autoqueuesetupgui} ? "waitforgui" : "nogui";
- setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig);
- return 1;
-}
-
-sub get_auto_admin {
- my ($printer) = @_;
- $printer->{enablequeuesonnewprinter} =
- (!defined($sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED}) ||
- ($sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED} =~ /no/i) ?
- 0 : 1);
- $printer->{autoqueuesetuponnewprinter} =
- (!defined($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED}) ||
- ($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED} =~ /yes/i) ?
- 1 : 0);
- $printer->{enablequeuesonspoolerstart} =
- (!defined($sysconfig{ENABLE_QUEUES_ON_SPOOLER_START}) ||
- ($sysconfig{ENABLE_QUEUES_ON_SPOOLER_START} =~ /no/i) ?
- 0 : 1);
- $printer->{autoqueuesetuponstart} =
- (!defined($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START}) ||
- ($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START} =~ /yes/i) ?
- 1 : 0);
- $printer->{autoqueuesetupgui} =
- (!defined($sysconfig{AUTO_SETUP_QUEUES_MODE}) ||
- ($sysconfig{AUTO_SETUP_QUEUES_MODE} =~ /waitforgui/i) ?
- 1 : 0);
-}
-
-sub set_jap_textmode {
- my $textmode = ($_[0] ? 'cjk' : '');
- # Do not write mime.convs if the file does not exist, as then
- # CUPS is not installed and the created mime.convs will be broken.
- # When installing CUPS later it will not work.
- return 1 if (! -r "$::prefix/etc/cups/mime.convs");
- substInFile {
- s!^(\s*text/plain\s+\S+\s+\d+\s+)\S+(\s*$)!$1${textmode}texttops$2!;
- } "$::prefix/etc/cups/mime.convs";
- return 1;
-}
-
-sub get_jap_textmode() {
- my @mimeconvs = cat_("$::prefix/etc/cups/mime.convs");
- (m!^\s*text/plain\s+\S+\s+\d+\s+(\S+)\s*$!m and
- $1 eq 'cjktexttops' and return 1) foreach @mimeconvs;
- return 0;
-}
-
-#----------------------------------------------------------------------
-# Handling of /etc/cups/cupsd.conf
-
-sub read_cupsd_conf() {
- # If /etc/cups/cupsd.conf does not exist a default cupsd.conf will be
- # put out to avoid writing of a broken cupsd.conf file when we write
- # it back later.
- my @cupsd_conf = cat_("$::prefix/etc/cups/cupsd.conf");
- if (!@cupsd_conf) {
- @cupsd_conf = map { /\n$/s or "$_\n" } split('\n',
-'LogLevel info
-TempDir /var/spool/cups/tmp
-Port 631
-Browsing On
-BrowseAddress @LOCAL
-BrowseDeny All
-BrowseAllow 127.0.0.1
-BrowseAllow @LOCAL
-BrowseOrder deny,allow
-<Location />
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-Allow From @LOCAL
-</Location>
-<Location /admin>
-AuthType Basic
-AuthClass System
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-</Location>
-');
- }
- return @cupsd_conf;
-}
-
-sub write_cupsd_conf {
- my (@cupsd_conf) = @_;
- # Do not write cupsd.conf if the file does not exist, as then
- # CUPS is not installed and the created cupsd.conf will be broken.
- # When installing CUPS later it will not start.
- return 1 if (! -r "$::prefix/etc/cups/cupsd.conf");
- output("$::prefix/etc/cups/cupsd.conf", @cupsd_conf);
-}
-
-sub read_location {
-
- # Return the lines inside the [path] location block
- #
- # <Location [path]>
- # ...
- # </Location>
-
- my ($cupsd_conf_ptr, $path) = @_;
-
- my @result;
- if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
- my $location_start = -1;
- my $location_end = -1;
- # Go through all the lines, bail out when start and end line found
- for (my $i = 0;
- $i <= $#{$cupsd_conf_ptr} && $location_end == -1;
- $i++) {
- if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
- # Start line of block
- $location_start = $i;
- } elsif ($cupsd_conf_ptr->[$i] =~
- m!^\s*<\s*/Location\s*>! &&
- $location_start != -1) {
- # End line of block
- $location_end = $i;
- last;
- } elsif ($location_start >= 0 && $location_end < 0) {
- # Inside the location block
- push(@result, $cupsd_conf_ptr->[$i]);
- }
- }
- } else {
- # If there is no root location block, set the result array to
- # "undef"
- @result = undef;
- }
- return @result;
-}
-
-sub rip_location {
-
- # Cut out the [path] location block
- #
- # <Location [path]>
- # ...
- # </Location>
- #
- # so that it can be treated seperately without affecting the
- # rest of the file
-
- my ($cupsd_conf_ptr, $path) = @_;
-
- my @location;
- my $location_start = -1;
- my $location_end = -1;
- if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
- # Go through all the lines, bail out when start and end line found
- for (my $i = 0;
- $i <= $#{$cupsd_conf_ptr} && $location_end == -1;
- $i++) {
- if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
- # Start line of block
- $location_start = $i;
- } elsif ($cupsd_conf_ptr->[$i] =~
- m!^\s*<\s*/Location\s*>! &&
- $location_start != -1) {
- # End line of block
- $location_end = $i;
- last;
- }
- }
- # Rip out the block and store it seperately
- @location =
- splice(@$cupsd_conf_ptr, $location_start,
- $location_end - $location_start + 1);
- } else {
- # If there is no location block, create one
- $location_start = $#{$cupsd_conf_ptr} + 1;
- @location = ("<Location $path>\n", "</Location>\n");
- }
-
- return $location_start, @location;
-}
-
-sub insert_location {
-
- # Re-insert a location block ripped with "rip_location"
-
- my ($cupsd_conf_ptr, $location_start, @location) = @_;
-
- splice(@$cupsd_conf_ptr, $location_start,0,@location);
-}
-
-sub add_to_location {
-
- # Add a directive to a given location (only if it is not already there)
-
- my ($cupsd_conf_ptr, $path, $directive) = @_;
-
- my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
- my $success = handle_configs::insert_directive(\@location, $directive);
- insert_location($cupsd_conf_ptr, $location_start, @location);
- return $success;
-}
-
-sub remove_from_location {
-
- # Remove a directive from a given location
-
- my ($cupsd_conf_ptr, $path, $directive) = @_;
-
- my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
- my $success = handle_configs::remove_directive(\@location, $directive);
- insert_location($cupsd_conf_ptr, $location_start, @location);
- return $success;
-}
-
-sub replace_in_location {
-
- # Replace a directive in a given location
-
- my ($cupsd_conf_ptr, $path, $olddirective, $newdirective) = @_;
-
- my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
- my $success = handle_configs::replace_directive(\@location,
- $olddirective,
- $newdirective);
- insert_location($cupsd_conf_ptr, $location_start, @location);
- return $success;
-}
-
-sub add_allowed_host {
-
- # Add a host or network which should get access to the local printer(s)
- my ($cupsd_conf_ptr, $host) = @_;
-
- return (handle_configs::insert_directive($cupsd_conf_ptr,
- "BrowseAddress $host") and
- add_to_location($cupsd_conf_ptr, "/", "Allow From $host"));
-}
-
-sub remove_allowed_host {
-
- # Remove a host or network which should get access to the local
- # printer(s)
- my ($cupsd_conf_ptr, $host) = @_;
-
- return (handle_configs::remove_directive($cupsd_conf_ptr, "BrowseAddress $host") and
- remove_from_location($cupsd_conf_ptr, "/",
- "Allow From $host"));
-}
-
-sub replace_allowed_host {
-
- # Remove a host or network which should get access to the local
- # printer(s)
- my ($cupsd_conf_ptr, $oldhost, $newhost) = @_;
-
- return (handle_configs::replace_directive($cupsd_conf_ptr,
- "BrowseAddress $oldhost",
- "BrowseAddress $newhost") and
- replace_in_location($cupsd_conf_ptr, "/", "Allow From $newhost",
- "Allow From $newhost"));
-}
-
-sub broadcastaddress {
-
- # Determines the broadcast address (for "BrowseAddress" line) for
- # a given network IP
-
- my ($address) = @_;
-
- if ($address =~ /^\d+\.\*$/) {
- $address =~ s/\*$/255.255.255/;
- } elsif ($address =~ /^\d+\.\d+\.\*$/) {
- $address =~ s/\*$/255.255/;
- } elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) {
- $address =~ s/\*$/255/;
- } elsif ($address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$!) {
- my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
- my $mask = ((1 << $5) - 1) << (32 - $5);
- my $broadcast = $numadr | (~$mask);
- $address =
- (($broadcast & (255 << 24)) >> 24) . '.' .
- (($broadcast & (255 << 16)) >> 16) . '.' .
- (($broadcast & (255 << 8)) >> 8) . '.' .
- ($broadcast & 255);
- } elsif ($address =~
- m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!) {
- my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
- my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8;
- my $broadcast = $numadr | (~$mask);
- $address =
- (($broadcast & (255 << 24)) >> 24) . '.' .
- (($broadcast & (255 << 16)) >> 16) . '.' .
- (($broadcast & (255 << 8)) >> 8) . '.' .
- ($broadcast & 255);
- }
-
- return $address;
-}
-
-sub networkaddress {
-
- # Guesses a network address for a given broadcast address
-
- my ($address) = @_;
-
- if ($address =~ /\.255$/) {
- while ($address =~ s/\.255$//) {}
- $address .= ".*";
- }
-
- return $address;
-}
-
-sub localprintersshared {
-
- # Do we broadcast our local printers
-
- my ($printer) = @_;
-
- return ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i &&
- $printer->{cupsconfig}{keys}{BrowseInterval} != 0 &&
- $#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0);
-}
-
-sub remotebroadcastsaccepted {
-
- # Do we accept broadcasts from remote CUPS servers?
-
- my ($printer) = @_;
-
- # Is browsing not turned on at all?
- if ($printer->{cupsconfig}{keys}{Browsing} =~ /off/i) {
- return 0;
- }
-
- # No "BrowseDeny" lines at all
- if ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} < 0) {
- return 1;
- }
-
- my $havedenyall =
- join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
- /All/im;
- my $havedenylocal =
- join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
- /\@LOCAL/im;
- my $orderallowdeny =
- $printer->{cupsconfig}{keys}{BrowseOrder} =~
- /allow\s*,\s*deny/i;
- my $haveallowremote = 0;
- foreach my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
- next if
- $allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i;
- $haveallowremote = 1;
- }
-
- # A line denying all (or at least the all LANs) together with the order
- # "allow,deny" or without "BrowseAllow" lines (which allow the
- # broadcasts of at least one remote resource).
- if (($havedenyall || $havedenylocal) &&
- ($orderallowdeny || !$haveallowremote)) {
- return 0;
- }
-
- return 1;
-}
-
-sub clientnetworks {
-
- # Determine the client networks to which the printers will be
- # shared If the configuration is supported by our simplified
- # interface ("Deny From All", "Order Deny,Allow", "Allow From ..."
- # lines in "<location /> ... </location>", a "BrowseAddress ..."
- # line for each "Allow From ..." line), return the list of allowed
- # client networks ("Allow"/"BrowseAddress" lines), if not, return
- # the list of all items which are at least one of the
- # "BrowseAddresse"s or one of the "Allow From" addresses together
- # with a flag that the setup is not supported.
-
- my ($printer) = @_;
-
- # Check for a "Deny From All" line
- my $havedenyfromall =
- (join('', @{$printer->{cupsconfig}{root}{DenyFrom}}) =~
- /All/im ? 1 : 0);
-
- # Check for "Deny From XXX" with XXX != All
- my $havedenyfromnotall =
- ($#{$printer->{cupsconfig}{root}{DenyFrom}} - $havedenyfromall < 0 ?
- 0 : 1);
-
- # Check for a "BrowseDeny All" line
- my $havebrowsedenyall =
- (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
- /All/im ? 1 : 0);
-
- # Check for "BrowseDeny XXX" with XXX != All
- my $havebrowsedenynotall =
- ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} -
- $havebrowsedenyall < 0 ? 0 : 1);
-
- my @sharehosts;
- my $haveallowfromlocalhost = 0;
- my $haveallowedhostwithoutbrowseaddress = 0;
- my $haveallowedhostwithoutbrowseallow = 0;
- # Go through all "Allow From" lines
- foreach my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) {
- if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
- # Line pointing to localhost
- $haveallowfromlocalhost = 1;
- } elsif ($line =~ /^\s*(none)\s*$/i) {
- # Skip "Allow From None" lines
- } elsif (!member($line, @sharehosts)) {
- # Line pointing to remote server
- push(@sharehosts, $line);
- if (!member(broadcastaddress($line),
- @{$printer->{cupsconfig}{keys}{BrowseAddress}})) {
- $haveallowedhostwithoutbrowseaddress = 1;
- }
- if (!member($line,
- @{$printer->{cupsconfig}{keys}{BrowseAllow}})) {
- $haveallowedhostwithoutbrowseallow = 1;
- }
- }
- }
- my $havebrowseaddresswithoutallowedhost = 0;
- # Go through all "BrowseAdress" lines
- foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) {
- if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
- # Skip lines pointing to localhost
- } elsif ($line =~ /^\s*(none)\s*$/i) {
- # Skip "Allow From None" lines
- } elsif (!member($line, map { broadcastaddress($_) } @sharehosts)) {
- # Line pointing to remote server
- push(@sharehosts, networkaddress($line));
- if ($printer->{cupsconfig}{localprintersshared}) {
- $havebrowseaddresswithoutallowedhost = 1;
- }
- }
- }
- my $havebrowseallowwithoutallowedhost = 0;
- # Go through all "BrowseAllow" lines
- foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
- if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
- # Skip lines pointing to localhost
- } elsif ($line =~ /^\s*(none)\s*$/i) {
- # Skip "BrowseAllow None" lines
- } elsif (!member($line, @sharehosts)) {
- # Line pointing to remote server
- push(@sharehosts, $line);
- #$havebrowseallowwithoutallowedhost = 1;
- }
- }
-
- my $configunsupported = (!$havedenyfromall || $havedenyfromnotall ||
- !$havebrowsedenyall || $havebrowsedenynotall ||
- !$haveallowfromlocalhost ||
- $haveallowedhostwithoutbrowseaddress ||
- $havebrowseaddresswithoutallowedhost ||
- $haveallowedhostwithoutbrowseallow ||
- $havebrowseallowwithoutallowedhost);
-
- return $configunsupported, @sharehosts;
-}
-
-sub makesharehostlist {
-
- # Human-readable strings for hosts onto which the local printers
- # are shared
-
- my ($printer) = @_;
-
- my @sharehostlist;
- my %sharehosthash;
- foreach my $host (@{$printer->{cupsconfig}{clientnetworks}}) {
- if ($host =~ /\@LOCAL/i) {
- $sharehosthash{$host} = N("Local network(s)");
- } elsif ($host =~ /\@IF\((.*)\)/i) {
- $sharehosthash{$host} = N("Interface \"%s\"", $1);
- } elsif ($host =~ m!(/|^\*|\*$|^\.)!) {
- $sharehosthash{$host} = N("Network %s", $host);
- } else {
- $sharehosthash{$host} = N("Host %s", $host);
- }
- push(@sharehostlist, $sharehosthash{$host});
- }
- my %sharehosthash_inv = reverse %sharehosthash;
-
- return { list => \@sharehostlist,
- hash => \%sharehosthash,
- invhash => \%sharehosthash_inv };
-}
-
-sub makebrowsepolllist {
-
- # Human-readable strings for hosts from which the print queues are
- # polled
-
- my ($printer) = @_;
-
- my @browsepolllist;
- my %browsepollhash;
- foreach my $host (@{$printer->{cupsconfig}{BrowsePoll}}) {
- my ($ip, $port);
- if ($host =~ /^([^:]+):([^:]+)$/) {
- $ip = $1;
- $port = $2;
- } else {
- $ip = $host;
- $port = '631';
- }
- $browsepollhash{$host} = N("%s (Port %s)", $ip, $port);
- push(@browsepolllist, $browsepollhash{$host});
- }
- my %browsepollhash_inv = reverse %browsepollhash;
-
- return { list => \@browsepolllist,
- hash => \%browsepollhash,
- invhash => \%browsepollhash_inv };
-}
-
-sub is_network_ip {
-
- # Determine whwther the given string is a valid network IP
-
- my ($address) = @_;
-
- $address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/ ||
- $address =~ /^(\d+\.){1,3}\*$/ ||
- $address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$! ||
- $address =~
- m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!;
-
-}
-
-sub read_cups_config {
-
- # Read the information relevant to the printer sharing dialog from
- # the CUPS configuration
-
- my ($printer) = @_;
-
- # From /etc/cups/cupsd.conf
-
- # Keyword "Browsing"
- $printer->{cupsconfig}{keys}{Browsing} =
- handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
- 'Browsing', 'On');
-
- # Keyword "BrowseInterval"
- $printer->{cupsconfig}{keys}{BrowseInterval} =
- handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseInterval', '30');
-
- # Keyword "BrowseAddress"
- @{$printer->{cupsconfig}{keys}{BrowseAddress}} =
- handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAddress');
-
- # Keyword "BrowseAllow"
- @{$printer->{cupsconfig}{keys}{BrowseAllow}} =
- handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAllow');
-
- # Keyword "BrowseDeny"
- @{$printer->{cupsconfig}{keys}{BrowseDeny}} =
- handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
- 'BrowseDeny');
-
- # Keyword "BrowseOrder"
- $printer->{cupsconfig}{keys}{BrowseOrder} =
- handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseOrder', 'deny,allow');
-
- # Keyword "BrowsePoll" (needs "Browsing On")
- if ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) {
- @{$printer->{cupsconfig}{BrowsePoll}} =
- handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
- 'BrowsePoll');
- }
-
- # Root location
- @{$printer->{cupsconfig}{rootlocation}} =
- read_location($printer->{cupsconfig}{cupsd_conf}, '/');
-
- # Keyword "Allow from"
- @{$printer->{cupsconfig}{root}{AllowFrom}} =
- handle_configs::read_directives($printer->{cupsconfig}{rootlocation},
- 'Allow From');
- # Remove the IPs pointing to the local machine
- my @localips = printer::detect::getIPsOfLocalMachine();
- @{$printer->{cupsconfig}{root}{AllowFrom}} =
- grep {
- !member($_, @localips);
- } @{$printer->{cupsconfig}{root}{AllowFrom}};
-
- # Keyword "Deny from"
- @{$printer->{cupsconfig}{root}{DenyFrom}} =
- handle_configs::read_directives($printer->{cupsconfig}{rootlocation},
- 'Deny From');
-
- # Keyword "Order"
- $printer->{cupsconfig}{root}{Order} =
- handle_configs::read_unique_directive($printer->{cupsconfig}{rootlocation},
- 'Order', 'Deny,Allow');
-
- # Widget settings
-
- # Local printers available to other machines?
- $printer->{cupsconfig}{localprintersshared} =
- localprintersshared($printer);
-
- # This machine is accepting printers shared by remote machines?
- $printer->{cupsconfig}{remotebroadcastsaccepted} =
- remotebroadcastsaccepted($printer);
-
- # To which machines are the local printers available?
- ($printer->{cupsconfig}{customsharingsetup},
- @{$printer->{cupsconfig}{clientnetworks}}) =
- clientnetworks($printer);
-
-}
-
-sub write_cups_config {
-
- # Write the information edited via the printer sharing dialog into
- # the CUPS configuration
-
- my ($printer) = @_;
-
- # Local printers available to other machines?
- if ($printer->{cupsconfig}{localprintersshared}) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'Browsing On');
- if ($printer->{cupsconfig}{keys}{BrowseInterval} == 0) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseInterval 30');
- }
- } else {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseInterval 0');
- }
-
- # This machine is accepting printers shared by remote machines?
- if ($printer->{cupsconfig}{remotebroadcastsaccepted}) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'Browsing On');
- if (!$printer->{cupsconfig}{customsharingsetup}) {
- # If we broadcast our printers, let's accept the broadcasts
- # from the machines to which we broadcast
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseDeny All');
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseOrder Deny,Allow');
- }
- } else {
- if ($printer->{cupsconfig}{localprintersshared} ||
- $#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
- # Deny all broadcasts, but leave all "BrowseAllow" lines
- # untouched
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseDeny All');
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseOrder Allow,Deny');
- } else {
- # We also do not share printers, if we also do not
- # "BrowsePoll", we turn browsing off to do not need to deal
- # with any addresses
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'Browsing Off');
- }
- }
-
- # To which machines are the local printers available?
- if (!$printer->{cupsconfig}{customsharingsetup}) {
- my @localips = printer::detect::getIPsOfLocalMachine();
- # root location block
- @{$printer->{cupsconfig}{rootlocation}} =
- "<Location />\n" .
- "Order Deny,Allow\n" .
- "Deny From All\n" .
- "Allow From 127.0.0.1\n" .
- (@localips ?
- "Allow From " .
- join("\nAllow From ", @localips) .
- "\n" : "") .
- ($printer->{cupsconfig}{localprintersshared} &&
- $#{$printer->{cupsconfig}{clientnetworks}} >= 0 ?
- "Allow From " .
- join("\nAllow From ",
- grep {
- !member($_, @localips);
- } @{$printer->{cupsconfig}{clientnetworks}}) .
- "\n" : "") .
- "</Location>\n";
- my ($location_start, @_location) =
- rip_location($printer->{cupsconfig}{cupsd_conf}, "/");
- insert_location($printer->{cupsconfig}{cupsd_conf}, $location_start,
- @{$printer->{cupsconfig}{rootlocation}});
- # "BrowseAddress" lines
- if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAddress ' .
- join("\nBrowseAddress ",
- map { broadcastaddress($_) }
- @{$printer->{cupsconfig}{clientnetworks}}));
- } else {
- handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAddress');
- }
- # Set "BrowseAllow" lines
- if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAllow ' .
- join("\nBrowseAllow ",
- @{$printer->{cupsconfig}{clientnetworks}}));
- } else {
- handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowseAllow');
- }
- }
-
- # Set "BrowsePoll" lines
- if ($#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowsePoll ' .
- join("\nBrowsePoll ",
- @{$printer->{cupsconfig}{BrowsePoll}}));
- # "Browsing" must be on for "BrowsePoll" to work
- handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
- 'Browsing On');
- } else {
- handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
- 'BrowsePoll');
- }
-
-}
-
-sub clean_cups_config {
-
- # Clean $printer data structure from all settings not related to
- # the CUPS printer sharing dialog
-
- my ($printer) = @_;
-
- delete $printer->{cupsconfig}{keys};
- delete $printer->{cupsconfig}{root};
- delete $printer->{cupsconfig}{cupsd_conf};
- delete $printer->{cupsconfig}{rootlocation};
-}
-
-#----------------------------------------------------------------------
-# Handling of /etc/cups/client.conf
-
-sub read_client_conf() {
- return (0, undef) if (! -r "$::prefix/etc/cups/client.conf");
- my @client_conf = cat_("$::prefix/etc/cups/client.conf");
- my @servers = handle_configs::read_directives(\@client_conf,
- "ServerName");
- return (@servers > 0,
- $servers[0]); # If there is more than one entry in client.conf,
- # the first one counts.
-}
-
-sub write_client_conf {
- my ($daemonless_cups, $remote_cups_server) = @_;
- # Create the directory for client.conf if needed
- (-d "$::prefix/etc/cups/") || mkdir("$::prefix/etc/cups/") || return 1;
- my (@client_conf) = cat_("$::prefix/etc/cups/client.conf");
- if ($daemonless_cups) {
- handle_configs::set_directive(\@client_conf,
- "ServerName $remote_cups_server");
- } else {
- handle_configs::comment_directive(\@client_conf, "ServerName");
- }
- output("$::prefix/etc/cups/client.conf", @client_conf);
-}
-
-
-
-#----------------------------------------------------------------------
-sub read_printers_conf {
- my ($printer) = @_;
- my $current;
-
- #- read /etc/cups/printers.conf file.
- #- according to this code, we are now using the following keys for each queues.
- #- DeviceURI > lpd://printer6/lp
- #- Info > Info Text
- #- Location > Location Text
- #- State > Idle|Stopped
- #- Accepting > Yes|No
- open(my $PRINTERS, "$::prefix/etc/cups/printers.conf") or return;
- local $_;
- while (<$PRINTERS>) {
- chomp;
- /^\s*#/ and next;
- if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
- elsif (m!\s*</Printer>!) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
- add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
- elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
- }
- close $PRINTERS;
-
- #- assume this printing system.
- $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri() {
- #- get the local printer to access via a Device URI.
- my @direct_uri;
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/sbin/lpinfo -v |");
- local $_;
- while (<$F>) {
- /^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
- }
- close $F;
- @direct_uri;
-}
-
-sub checkppd {
- # Check whether the PPD file is valid
- my ($printer, $ppdfile) = @_;
- return 1 if $printer->{SPOOLER} ne "cups";
- return run_program::rooted($::prefix, "cupstestppd", "-q",
- $ppdfile);
-}
-
-sub installppd {
- # Install the PPD file in /usr/share/cups/model/printerdrake/
- my ($printer, $ppdfile) = @_;
- return "" if !$ppdfile;
- # Install PPD file
- mkdir_p("$::prefix/usr/share/cups/model/printerdrake");
- # "cp_f()" is broken, it hangs infinitely
- # cp_f($ppdfile, "$::prefix/usr/share/cups/model/printerdrake");
- run_program::rooted($::prefix, "cp", "-f", $ppdfile,
- "$::prefix/usr/share/cups/model/printerdrake");
- $ppdfile =~ s!^(.*)(/[^/]+)$!/usr/share/cups/model/printerdrake$2!;
- chmod 0644, "$::prefix$ppdfile";
- # Restart CUPS to register new PPD file
- printer::services::restart("cups") if $printer->{SPOOLER} eq "cups";
- # Re-read printer database
- %thedb = ();
- # Supplying $ppdfile returns us the key for this PPD file in the
- # so that we can point to it in the printer/driver list
- return read_printer_db($printer, $printer->{SPOOLER}, $ppdfile);
-}
-
-sub clean_manufacturer_name {
- my ($make) = @_;
- # Clean some manufacturer's names so that every manufacturer has only
- # one entry in the tree list
- $make =~ s/^CANON\W.*$/CANON/i;
- $make =~ s/^LEXMARK.*$/LEXMARK/i;
- $make =~ s/^HEWLETT?[\s\-]*PACKARD/HP/i;
- $make =~ s/^SEIKO[\s\-]*EPSON/EPSON/i;
- $make =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
- $make =~ s/^CITOH/C.ITOH/i;
- $make =~ s/^OKI(|[\s\-]*DATA)\s*$/OKIDATA/i;
- $make =~ s/^(SILENTWRITER2?|COLORMATE)/NEC/i;
- $make =~ s/^(XPRINT|MAJESTIX)/XEROX/i;
- $make =~ s/^QMS-PS/QMS/i;
- $make =~ s/^(PERSONAL|LASERWRITER)/APPLE/i;
- $make =~ s/^DIGITAL/DEC/i;
- $make =~ s/\s+Inc\.//i;
- $make =~ s/\s+Corp\.//i;
- $make =~ s/\s+SA\.//i;
- $make =~ s/\s+S\.\s*A\.//i;
- $make =~ s/\s+Ltd\.//i;
- $make =~ s/\s+International//i;
- $make =~ s/\s+Int\.//i;
- return uc($make);
-}
-
-sub ppd_entry_str {
- my ($mf, $descr, $lang) = @_;
- my ($model, $driver);
- if ($descr) {
- # Apply the beautifying rules of poll_ppd_base
- if ($descr =~ /Foomatic \+ Postscript/) {
- $descr =~ s/Foomatic \+ Postscript/PostScript/;
- } elsif ($descr =~ /Foomatic/i) {
- $descr =~ s/Foomatic/GhostScript/i;
- } elsif ($descr =~ /CUPS\+Gimp-Print/i) {
- $descr =~ s/CUPS\+Gimp-Print/CUPS + Gimp-Print/i;
- } elsif ($descr =~ /CUPS\+Gutenprint/i) {
- $descr =~ s/CUPS\+Gutenprint/CUPS + Gutenprint/i;
- } elsif ($descr =~ /Series CUPS/i) {
- $descr =~ s/Series CUPS/Series, CUPS/i;
- } elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic|PCL|PXL)/i) {
- $descr .= ", PostScript";
- }
- # Avoid duplicate entries produced by ready-made Foomatic PPDs vs.
- # the Foomatic XML database
- $descr =~ s!(Foomatic|GhostScript)\s*/\s*(\S+)!$1 + $2!i;
- # Split model and driver
- $descr =~ s/\s*Series//i;
- $descr =~ s/\((.*?(PostScript|PS.*).*?)\)/$1/i;
- if ($descr =~
- /^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i ||
- $descr =~
- /^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i ||
- $descr =~ /^([^,]+?)\s*,?\s*(Foomatic.*)$/i ||
- $descr =~ /^([^,]+?)\s*,?\s*(GhostScript.*)$/i ||
- $descr =~ /^([^,]+?)\s*,?\s*(CUPS.*)$/i ||
- $descr =~ /^([^,]+?)\s*,\s+(PS.*)$/i ||
- $descr =~ /^([^,]+?)\s*,\s+(PXL.*)$/i ||
- $descr =~ /^([^,]+?)\s*,\s+(PCL.*)$/i ||
- $descr =~
- /^([^,]+?)\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i ||
- $descr =~ /^([^,]+?)\s*,?\s*(v?\.?\s*\d+\.\d+.*)$/i ||
- $descr =~ /^([^,]+?)\s*,?\s*(PostScript.*)$/i ||
- $descr =~ /^([^,]+?)\s*,\s*(.+?)$/) {
- $model = $1;
- $driver = $2;
- $model =~ s/[\-\s,]+$//;
- $driver =~ s/\b(PS|PostScript\b)/PostScript/gi;
- $driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i;
- $driver =~ s/\b(PXL|PCL[\s\-]*(6|XL)\b)/PCL-XL/gi;
- $driver =~ s/(PCL-XL)(.*)(PCL-XL)/$1$2/i;
- $driver =~ s/\b(PCL[\s\-]*(|4|5|5c|5e)\b)/PCL/gi;
- $driver =~ s/(PCL)(.*)(PCL)/$1$2/i;
- $driver =~
- s/^\s*(\(?v?\.?\s*\d\d\d\d\.\d\d\d\)?|v\d+\.\d+)([,\s]*)(.*?)\s*$/$3$2$1/i;
- $driver =~ s/,\s*\(/ (/g;
- $driver =~ s/[\-\s,]+$//;
- $driver =~ s/^[\-\s,]+//;
- $driver =~ s/\s+/ /g;
- if ($driver !~ /[a-z]/i) {
- $driver = "PostScript " . $driver;
- $driver =~ s/ $//;
- }
- } else {
- # Some PPDs do not have the ", <driver>" part.
- $model = $descr;
- if ($model =~ /\b(PXL|PCL[\s\-]*(6|XL))\b/i) {
- $driver = "PCL-XL";
- } elsif ($model =~ /\b(PCL[\s\-]*(|4|5|5c|5e)\b)/i) {
- $driver = "PCL";
- } else {
- $driver = "PostScript";
- }
- }
- }
- # Remove manufacturer's name from the beginning of the model
- # name (do not do this with manufacturer names which contain
- # odd characters)
- $model =~ s/^$mf[\s\-]+//i
- if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
- # Clean some manufacturer's names
- $mf = clean_manufacturer_name($mf);
- # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the
- # models do not appear twice
- if ($mf eq "CANON") {
- $model =~ s/BJC\s+/BJC-/;
- }
- # New MF devices from Epson have mis-spelled name in PPD files for
- # native CUPS drivers of Gimp-Print
- if ($mf eq "EPSON") {
- $model =~ s/Stylus CX\-/Stylus CX/;
- }
- # Remove the "Oki" from the beginning of the model names of Okidata
- # printers
- if ($mf eq "OKIDATA") {
- $model =~ s/Oki\s+//i;
- }
- # Try again to remove manufacturer's name from the beginning of the
- # model name, this time with the cleaned manufacturer name
- $model =~ s/^$mf[\s\-]+//i
- if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
- # Translate "(recommended)" in the driver string
- $driver =~ s/\(recommended\)/$precstr/gi;
- # Put out the resulting description string
- uc($mf) . '|' . $model . '|' . $driver .
- ($lang && " (" . lang::locale_to_main_locale($lang) . ")");
-}
-
-sub get_descr_from_ppd {
- my ($printer) = @_;
- #- if there is no ppd, this means this is a raw queue.
- if (! -r "$::prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd") {
- return "|" . N("Unknown model");
- }
- return get_descr_from_ppdfile($printer, "/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd");
-}
-
-sub get_descr_from_ppdfile {
- my ($printer, $ppdfile) = @_;
- my %ppd;
-
- # Remove ".gz" from end of file name, so that "catMaybeCompressed" works
- $ppdfile =~ s/\.gz$//;
-
- eval {
- local $_;
- foreach (catMaybeCompressed("$::prefix$ppdfile")) {
- # "OTHERS|Generic PostScript printer|PostScript (en)";
- /^\*([^\s:]*)\s*:\s*"([^"]*)"/ and
- do { $ppd{$1} = $2; next };
- /^\*([^\s:]*)\s*:\s*([^\s"]*)/ and
- do { $ppd{$1} = $2; next };
- }
- };
- my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
- my $make = $ppd{Manufacturer};
- my $lang = $ppd{LanguageVersion};
- my $entry = ppd_entry_str($make, $descr, $lang);
- if (!$printer->{expert}) {
- # Remove driver from printer list entry when in recommended mode
- $entry =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
- }
- return $entry;
-}
-
-sub ppd_devid_data {
- my ($ppd) = @_;
- $ppd = "$::prefix/usr/share/cups/model/$ppd";
- my @content = eval { catMaybeCompressed($ppd) } or return "", "";
-
- my ($devidmake, $devidmodel);
- /^\*Manufacturer:\s*"(.*)"\s*$/ and $devidmake = $1
- foreach @content;
- /^\*Product:\s*"\(?(.*?)\)?"\s*$/ and $devidmodel = $1
- foreach @content;
- return $devidmake, $devidmodel;
-}
-
-sub poll_ppd_base {
- my ($printer, $ppdfile) = @_;
-
- # If a $ppdfile is supplied, we return the key of the DB entry which
- # is for this file. This way we can pre-select a freshly added PPD in
- # the model/driver list.
-
- #- Before trying to poll the ppd database available to cups, we have
- #- to make sure the file /etc/cups/ppds.dat is no more modified.
- #- If cups continue to modify it (because it reads the ppd files
- #- available), the poll_ppd_base program simply cores :-)
- # else cups will not be happy! and ifup lo do not run ?
- run_program::rooted($::prefix, 'ifconfig', 'lo', '127.0.0.1');
- printer::services::start_not_running_service("cups");
- my $driversthere = scalar(keys %thedb);
- my $ppdentry = "";
- $ppdfile = "" if !defined($ppdfile);
- foreach (1..60) {
- open(my $PPDS, ($::testing ? $::prefix :
- "chroot $::prefix/ ") .
- "/usr/bin/poll_ppd_base -a |");
- local $_;
- while (<$PPDS>) {
- chomp;
- my ($ppd, $mf, $descr, $lang) = split /\|/;
- if ($ppd eq "raw") { next }
- $ppd && $mf && $descr and do {
- my $key = ppd_entry_str($mf, $descr, $lang);
- my ($model, $driver) = ($1, $2) if $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/;
- # Clean some manufacturer's names
- $mf = clean_manufacturer_name($mf);
- # Remove language tag
- $driver =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//;
- # Recommended Foomatic PPD? Extract "(recommended)"
- my $isrecommended =
- $driver =~ s/\s+$sprecstr\s*$//i;
- # Remove trailing white space
- $driver =~ s/\s+$//;
- # For Foomatic: Driver with "GhostScript + "
- my $fullfoomaticdriver = $driver;
- # Foomatic PPD? Extract driver name
- my $isfoomatic =
- $driver =~ s!^\s*(GhostScript|Foomatic)(\s*\+\s*|/)!!i;
- # Foomatic PostScript driver?
- $isfoomatic ||= $descr =~ /Foomatic/i;
- # Native CUPS?
- my $isnativecups = $driver =~ /CUPS/i;
- # Native PostScript
- my $isnativeps = !$isfoomatic && !$isnativecups;
- # Key without language tag (key as it was produced for the
- # entries from the Foomatic XML database)
- my $keynolang = $key;
- $keynolang =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//;
- if (!$isfoomatic) {
- # Driver is PPD when the PPD is a non-Foomatic one
- $driver = "PPD";
- } else {
- # Remove language tag in menu entry when PPD is from
- # Foomatic
- $key = $keynolang;
- }
- my ($devidmake, $devidmodel, $deviddesc, $devidcmdset);
- # Replace an existing printer entry if it has linked
- # to the current PPD file.
- my ($filename, $ppdkey);
- $ppd =~ m!([^/]+\.ppd)(\.gz|\.bz2|)$!;
- if (($filename = $1) &&
- ($#{$linkedppds{$filename}} >= 0)) {
- foreach $ppdkey (@{$linkedppds{$filename}}) {
- next if !defined($thedb{$ppdkey});
- # Save the autodetection data
- $devidmake = $thedb{$ppdkey}{devidmake};
- $devidmodel = $thedb{$ppdkey}{devidmodel};
- $deviddesc = $thedb{$ppdkey}{deviddesc};
- $devidcmdset = $thedb{$ppdkey}{devidcmdset};
- # We must preserve make and model if we have one
- # PPD for multiple printers
- my $oldmake = $thedb{$ppdkey}{make};
- my $oldmodel = $thedb{$ppdkey}{model};
- # Remove the old entry
- delete $thedb{$ppdkey};
- my $newkey = $key;
- # User-added PPD file, mark it
- if ($ppd =~ m!printerdrake/!i) {
- $newkey .= ", " . N("user-supplied");
- }
- # Newly added PPD file, mark it
- if ($ppdfile eq "/usr/share/cups/model/$ppd") {
- $newkey .= ", " . N("NEW");
- }
- if (!$printer->{expert}) {
- # Remove driver part in recommended mode
- $newkey =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
- } else {
- # If the Foomatic entry is "recommended" let
- # the new PPD entry be "recommended" and
- # otherwise not
- $newkey =~ s/\s*$sprecstr//g;
- $newkey .= " $precstr"
- if $ppdkey =~ m!$sprecstr!;
- # Remove duplicate "recommended" tags and have
- # the "recommended" tag at the end
- $newkey =~
- s/(\s*$sprecstr)(.*?)(\s*$sprecstr)/$2$3/;
- $newkey =~ s/(\s*$sprecstr)(.+)$/$2$1/;
- }
- # Conserve the make and model of the original entry
- $newkey =~
- s/^([^\|]+)(\|[^\|]+)(\|.*|)$/$oldmake$2$3/;
- $newkey =~
- s/^([^\|]+\|)([^\|]+)(\|.*|)$/$1$oldmodel$3/;
- # Do not overwrite another entry which has the
- # same key, consider different PPD files with
- # the same identity as a bug and drop them
- if ($thedb{$newkey}) {
- next;
- }
- # Create the new entry
- $thedb{$newkey}{ppd} = $ppd;
- $thedb{$newkey}{make} = $oldmake;
- $thedb{$newkey}{model} = $oldmodel;
- $thedb{$newkey}{driver} = $driver;
- # Recover saved autodetection data
- $thedb{$newkey}{devidmake} = $devidmake
- if $devidmake;
- $thedb{$newkey}{devidmodel} = $devidmodel
- if $devidmodel;
- $thedb{$newkey}{deviddesc} = $deviddesc
- if $deviddesc;
- $thedb{$newkey}{devidcmdset} = $devidcmdset
- if $devidcmdset;
- # Rememeber which entry is the freshly added
- # PPD file
- $ppdentry = $newkey if
- $ppdfile eq "/usr/share/cups/model/$ppd";
- }
- next;
- } elsif (!$printer->{expert}) {
- # Remove driver from printer list entry when in
- # recommended mode
- $key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
- # Only replace an existing printer entry if
- # - its driver is not the same as the driver of the
- # new one
- # AND if one of the following items is true
- # - The existing entry uses a "Foomatic + Postscript"
- # driver and the new one is native PostScript
- # - The existing entry is a Foomatic entry and the new
- # one is "recommended"
- # - The existing entry is a native PostScript entry
- # and the new entry is a "recommended" driver other
- # then "Foomatic + Postscript"
- if (defined($thedb{$key})) {
- next if lc($thedb{$key}{driver}) eq
- lc($driver);
- if ($isnativeps &&
- $thedb{$key}{driver} =~ /^PostScript$/i ||
- $thedb{$key}{driver} ne "PPD" && $isrecommended ||
- $thedb{$key}{driver} eq "PPD" && $isrecommended && $driver ne "PostScript") {
- # Save the autodetection data
- $devidmake = $thedb{$key}{devidmake};
- $devidmodel = $thedb{$key}{devidmodel};
- $deviddesc = $thedb{$key}{deviddesc};
- $devidcmdset = $thedb{$key}{devidcmdset};
- # Remove the old entry
- delete $thedb{$key};
- } else {
- next;
- }
- }
- } elsif ((defined
- $thedb{"$mf|$model|$fullfoomaticdriver"} ||
- defined
- $thedb{"$mf|$model|$fullfoomaticdriver $precstr"}) &&
- $isfoomatic) {
- # Expert mode: There is already an entry for the
- # same printer/driver combo produced by the
- # Foomatic XML database, so do not make a second
- # entry
- next;
- } elsif (defined
- $thedb{"$mf|$model|PostScript $precstr"} &&
- $isnativeps) {
- # Expert mode: "Foomatic + Postscript" driver is
- # recommended and this is a PostScript PPD? Make
- # this PPD the recommended one
- foreach (keys
- %{$thedb{"$mf|$model|PostScript $precstr"}}) {
- $thedb{"$mf|$model|PostScript"}{$_} =
- $thedb{"$mf|$model|PostScript $precstr"}{$_};
- }
- delete
- $thedb{"$mf|$model|PostScript $precstr"};
- if (!$isrecommended) {
- $key .= " $precstr";
- }
- } elsif ($driver =~ /PostScript/i &&
- $isrecommended && $isfoomatic &&
- (my @foundkeys = grep {
- /^$mf\|$model\|/ && !/CUPS/i &&
- $thedb{$_}{driver} eq "PPD";
- } keys %thedb)) {
- # Expert mode: "Foomatic + Postscript" driver is
- # recommended and there was a PostScript PPD? Make
- # the PostScript PPD the recommended one
- my $firstfound = $foundkeys[0];
- if (!(any { /$sprecstr/ } @foundkeys)) {
- # Do it only if none of the native PostScript
- # PPDs for this printer is already "recommended"
- foreach (keys %{$thedb{$firstfound}}) {
- $thedb{"$firstfound $precstr"}{$_} =
- $thedb{$firstfound}{$_};
- }
- delete $thedb{$firstfound};
- }
- $key =~ s/\s*$sprecstr//;
- } elsif ($driver !~ /PostScript/i &&
- $isrecommended && $isfoomatic &&
- (@foundkeys = grep {
- /^$mf\|$model\|.*$sprecstr/ &&
- !/CUPS/i && $thedb{$_}{driver} eq "PPD";
- } keys %thedb)) {
- # Expert mode: Foomatic driver other than "Foomatic +
- # Postscript" is recommended and there was a PostScript
- # PPD which was recommended? Make the Foomatic driver
- # the recommended one
- foreach my $sourcekey (@foundkeys) {
- # Remove the "recommended" tag
- my $destkey = $sourcekey;
- $destkey =~ s/\s+$sprecstr\s*$//i;
- foreach (keys %{$thedb{$sourcekey}}) {
- $thedb{$destkey}{$_} = $thedb{$sourcekey}{$_};
- }
- delete $thedb{$sourcekey};
- }
- }
-
- # User-added PPD file, mark it
- if ($ppd =~ m!printerdrake/!i) {
- $key .= ", " . N("user-supplied");
- }
- # Newly added PPD file, mark it
- if ($ppdfile eq "/usr/share/cups/model/$ppd") {
- $key .= ", " . N("NEW");
- }
- # Remove duplicate "recommended" tags and have the
- # "recommended" tag at the end
- $key =~ s/(\s*$sprecstr)(.*?)(\s*$sprecstr)/$2$3/;
- $key =~ s/(\s*$sprecstr)(.+)$/$2$1/;
- # Do not overwrite another entry which has the same
- # key, consider different PPD files with the same identity
- # as a bug and drop them
- if ($thedb{$key}) {
- next;
- }
- # Create the new entry
- $thedb{$key}{ppd} = $ppd;
- $thedb{$key}{make} = $mf;
- $thedb{$key}{model} = $model;
- $thedb{$key}{driver} = $driver;
- # Recover saved autodetection data
- $thedb{$key}{devidmake} = $devidmake if $devidmake;
- $thedb{$key}{devidmodel} = $devidmodel if $devidmodel;
- $thedb{$key}{deviddesc} = $deviddesc if $deviddesc;
- $thedb{$key}{devidcmdset} = $devidcmdset if $devidcmdset;
- # Get autodetection data
- #my ($devidmake, $devidmodel) = ppd_devid_data($ppd);
- #$thedb{$key}{devidmake} = $devidmake;
- #$thedb{$key}{devidmodel} = $devidmodel;
- # Rememeber which entry is the freshly added PPD file
- $ppdentry = $key if
- $ppdfile eq "/usr/share/cups/model/$ppd";
- };
- }
- close $PPDS;
- scalar(keys %thedb) - $driversthere > 5 and last;
- #- we have to try again running the program, wait here a little
- #- before.
- sleep 1;
- }
- #scalar(keys %descr_to_ppd) > 5 or
- # die "unable to connect to cups server";
-
- return $ppdentry;
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
- my ($printer) = @_;
-
- #- Create the queue with "foomatic-configure", in case of queue
- #- renaming copy the old queue
- my $quotedconnect = $printer->{currentqueue}{connect};
- $quotedconnect =~ s/\$/\\\$/g; # Quote '$' in URI
- run_program::rooted($::prefix, "foomatic-configure", "-q",
- "-s", $printer->{currentqueue}{spooler},
- "-n", $printer->{currentqueue}{queue},
- ($printer->{currentqueue}{queue} ne
- $printer->{OLD_QUEUE} &&
- $printer->{configured}{$printer->{OLD_QUEUE}} ?
- ("-C", $printer->{OLD_QUEUE}) : ()),
- "-c", $quotedconnect,
- ($printer->{currentqueue}{ppd} ?
- ($printer->{currentqueue}{ppd} ne '1' ?
- ("--ppd",
- ($printer->{currentqueue}{ppd} !~ m!^/! ?
- "/usr/share/cups/model/" : "") .
- $printer->{currentqueue}{ppd}) : ()) :
- ($printer->{currentqueue}{foomatic} ?
- ("-p", $printer->{currentqueue}{printer},
- "-d",($printer->{currentqueue}{driver} ne "PPD" ?
- $printer->{currentqueue}{driver} :
- "Postscript")) :
- ("-d", "raw"))),
- "-N", $printer->{currentqueue}{desc},
- "-L", $printer->{currentqueue}{loc},
- if_($printer->{SPOOLER} eq "cups",
- "--backend-dont-disable=" .
- $printer->{currentqueue}{dd},
- "--backend-attempts=" .
- $printer->{currentqueue}{att},
- "--backend-delay=" .
- $printer->{currentqueue}{delay}),
- @{$printer->{currentqueue}{options}}
- ) or return 0;
- if ($printer->{currentqueue}{ppd} &&
- ($printer->{currentqueue}{ppd} ne '1')) {
- # Add a comment line containing the path of the used PPD file to the
- # end of the PPD file
- if ($printer->{currentqueue}{ppd} ne '1') {
- append_to_file("$::prefix/etc/cups/ppd/$printer->{currentqueue}{queue}.ppd", "*%MDKMODELCHOICE:$printer->{currentqueue}{ppd}\n");
- }
- }
-
- # Make sure that queue is active
- if ($printer->{NEW} && ($printer->{SPOOLER} ne "pdq")) {
- run_program::rooted($::prefix, "foomatic-printjob",
- "-s", $printer->{currentqueue}{spooler},
- "-C", "up", $printer->{currentqueue}{queue});
- }
-
- # Check whether a USB printer is configured and activate USB printing if so
- my $useUSB = 0;
- foreach (values %{$printer->{configured}}) {
- $useUSB ||= $_->{queuedata}{connect} =~ /usb/i ||
- $_->{DeviceURI} =~ /usb/i;
- }
- $useUSB ||= $printer->{currentqueue}{connect} =~ /usb/i;
- if ($useUSB) {
- my $f = "$::prefix/etc/sysconfig/usb";
- my %usb = getVarsFromSh($f);
- $usb{PRINTER} = "yes";
- setVarsInSh($f, \%usb);
- }
-
- # Open permissions for device file when PDQ is chosen as spooler
- # so normal users can print.
- if ($printer->{SPOOLER} eq 'pdq') {
- if ($printer->{currentqueue}{connect} =~
- m!^\s*(file|parallel|usb|serial):(\S*)\s*$!) {
- set_permissions($1, "666");
- }
- }
-
- # Make a new printer entry in the $printer structure
- $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata} =
- {};
- copy_printer_params($printer->{currentqueue},
- $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata});
- # Construct an entry line for tree view in main window of
- # printerdrake
- make_menuentry($printer, $printer->{currentqueue}{queue});
-
- # Store the default option settings
- $printer->{configured}{$printer->{currentqueue}{queue}}{args} = {};
- $printer->{configured}{$printer->{currentqueue}{queue}}{args} =
- $printer->{ARGS};
-
- # In case of CUPS set some more useful defaults for text and image
- # printing
- if ($printer->{SPOOLER} eq "cups") {
- set_cups_special_options($printer,
- $printer->{currentqueue}{queue});
- }
-
- # Clean up
- delete($printer->{ARGS});
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = {};
- $printer->{DBENTRY} = "";
- $printer->{currentqueue} = {};
-
- return 1;
-}
-
-sub enable_disable_queue {
- my ($printer, $queue, $state) = @_;
-
- if (($printer->{SPOOLER} ne "pdq") &&
- ($printer->{SPOOLER} ne "rcups")) {
- run_program::rooted($::prefix, "foomatic-printjob",
- "-s", $printer->{SPOOLER},
- "-C", ($state ? "start" : "stop"), $queue);
- }
-}
-
-sub remove_queue($$) {
- my ($printer, $queue) = @_;
- run_program::rooted($::prefix, "foomatic-configure", "-R", "-q",
- "-s", $printer->{SPOOLER},
- "-n", $queue);
- # Delete old stuff from data structure
- delete $printer->{configured}{$queue};
- delete($printer->{currentqueue});
- delete($printer->{ARGS});
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = {};
- $printer->{DBENTRY} = "";
- $printer->{currentqueue} = {};
-}
-
-sub restart_queue($) {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
-
- # Restart the daemon(s)
- for ($printer->{SPOOLER}) {
- /cups/ and do {
- #- restart cups.
- printer::services::restart("cups");
- last };
- /lpr|lprng/ and do {
- #- restart lpd.
- foreach ("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock") {
- my $pidlpd = (cat_("$::prefix$_"))[0];
- kill 'TERM', $pidlpd if $pidlpd;
- unlink "$::prefix$_";
- }
- printer::services::restart("lpd"); sleep 1;
- last };
- }
- # Kill the jobs
- run_program::rooted($::prefix, "foomatic-printjob", "-R",
- "-s", $printer->{SPOOLER},
- "-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
- my ($printer, @pages) = @_;
- my $queue = $printer->{QUEUE};
- my $lpr = "/usr/bin/foomatic-printjob";
- my $lpq = "$lpr -Q";
- my $spooler = $printer->{SPOOLER};
- $spooler = "cups" if $spooler eq "rcups";
-
- # Print the pages
- foreach (@pages) {
- my $page = $_;
- # Only text and PostScript can be printed directly with all
- # spoolers, images must be treated seperately
- if ($page =~ /\.jpg$/) {
- if ($spooler ne "cups") {
- # Use "convert" from ImageMagick for non-CUPS spoolers
- system(($::testing ? $::prefix : "chroot $::prefix/ ") .
- "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
- ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "$lpr -s $spooler -P $queue");
- } else {
- # Use CUPS's internal image converter with CUPS, tell it
- # to let the image occupy 90% of the page size (so nothing
- # gets cut off by unprintable borders)
- run_program::rooted($::prefix, $lpr, "-s", $spooler,
- "-P", $queue, "-o", "scaling=90", $page);
- }
- } else {
- run_program::rooted($::prefix, $lpr, "-s", $spooler,
- "-P", $queue, $page);
- }
- }
- sleep 5; #- allow lpr to send pages.
- # Check whether the job is queued
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpq -s $spooler -P $queue |");
- my @lpq_output =
- grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <$F>;
- close $F;
- @lpq_output;
-}
-
-sub help_output {
- my ($printer, $spooler) = @_;
- my $queue = $printer->{QUEUE};
-
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . sprintf($spoolers{$spooler}{help}, $queue));
- my $helptext = join("", <$F>);
- close $F;
- $helptext ||= "Option list not available!\n";
- return $helptext;
-}
-
-sub print_optionlist {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
- my $lpr = "/usr/bin/foomatic-printjob";
-
- # Print the option list pages
- if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
- run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER},
- "-P", $queue, "-o", "docs",
- "/etc/bashrc");
- } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
- system(($::testing ? $::prefix : "chroot $::prefix/ ") .
- "/usr/bin/lphelp $queue | " .
- ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "$lpr -s $printer->{SPOOLER} -P $queue");
- }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
- my ($oldspooler, $newspooler) = @_;
-
- # No local queues available in daemon-less CUPS mode
- return () if ($oldspooler eq "rcups") or ($newspooler eq "rcups");
-
- my @queuelist; #- here we will list all Foomatic-generated queues
- # Get queue list with foomatic-configure
- open(my $QUEUEOUTPUT, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "foomatic-configure -Q -q -s $oldspooler |") or
- die "Could not run foomatic-configure";
-
- my $entry = {};
- my $inentry = 0;
- local $_;
- while (<$QUEUEOUTPUT>) {
- chomp;
- if ($inentry) {
- # We are inside a queue entry
- if (m!^\s*</queue>\s*$!) {
- # entry completed
- $inentry = 0;
- if ($entry->{foomatic} && $entry->{spooler} eq $oldspooler) {
- # Is the connection type supported by the new
- # spooler?
- if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|hp|ptal|lpd|socket|smb|ipp):/ ||
- $newspooler =~ /^(lpd|lprng)$/ && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ncp|postpipe):/ ||
- $newspooler eq "pdq" && $entry->{connect} =~ /^(file|ptal|lpd|socket):/) {
- push(@queuelist, $entry->{name});
- }
- }
- $entry = {};
- } elsif (m!^\s*<name>(.+)</name>\s*$!) {
- # queue name
- $entry->{name} = $1;
- } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
- # connection type (URI)
- $entry->{connect} = $1;
- }
- } else {
- if (m!^\s*<queue\s+foomatic\s*=\s*"?(\d+)"?\s*spooler\s*=\s*"?(\w+)"?\s*>\s*$!) {
- # new entry
- $inentry = 1;
- $entry->{foomatic} = $1;
- $entry->{spooler} = $2;
- }
- }
- }
- close $QUEUEOUTPUT;
-
- return @queuelist;
-}
-
-sub copy_foomatic_queue {
- my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
- run_program::rooted($::prefix, "foomatic-configure", "-q",
- "-s", $printer->{SPOOLER},
- "-n", $newqueue,
- "-C", $oldspooler, $oldqueue);
- # In case of CUPS set some more useful defaults for text and image printing
- if ($printer->{SPOOLER} eq "cups") {
- set_cups_special_options($printer, $newqueue);
- }
-}
-
-# ------------------------------------------------------------------
-#
-# Stuff for non-interactive printer configuration
-#
-# ------------------------------------------------------------------
-
-# Check whether a given URI (for example of an existing queue matches
-# one of the auto-detected printers
-
-sub autodetectionentry_for_uri {
- my ($uri, @autodetected) = @_;
-
- if ($uri =~ m!^usb://([^/]+)/([^\?]+)(|\?serial=(\S+))$!) {
- # USB device with URI referring to printer model
- my $make = $1;
- my $model = $2;
- my $serial = $4;
- if ($make && $model) {
- $make =~ s/\%20/ /g;
- $model =~ s/\%20/ /g;
- $serial =~ s/\%20/ /g;
- $make =~ s/Hewlett[-\s_]Packard/HP/;
- $make =~ s/HEWLETT[-\s_]PACKARD/HP/;
- my $smake = handle_configs::searchstr($make);
- my $smodel = handle_configs::searchstr($model);
- foreach my $p (@autodetected) {
- next if $p->{port} !~ /usb/i;
- next if ((!$p->{val}{MANUFACTURER} ||
- $p->{val}{MANUFACTURER} ne $make) &&
- (!$p->{val}{DESCRIPTION} ||
- $p->{val}{DESCRIPTION} !~ /^\s*$smake\s+/));
- next if ((!$p->{val}{MODEL} ||
- $p->{val}{MODEL} ne $model) &&
- (!$p->{val}{DESCRIPTION} ||
- $p->{val}{DESCRIPTION} !~ /\s+$smodel\s*$/));
- next if ($serial &&
- (!$p->{val}{SERIALNUMBER} ||
- $p->{val}{SERIALNUMBER} ne $serial));
- return $p;
- }
- }
- } elsif ($uri =~ m!^hp:/(usb|par|net)/!) {
- # HP printer (controlled by HPLIP)
- my $hplipdevice = $uri;
- $hplipdevice =~ m!^hp:/(usb|par|net)/(\S+?)(\?(serial|device)=(\S+)|)$!;
- my $bus = $1;
- my $model = $2;
- my $serial = undef;
- my $device = undef;
- if ($4 eq 'serial') {
- $serial = $5;
- } elsif ($4 eq 'device') {
- $device = $5;
- }
- $model =~ s/_/ /g;
- foreach my $p (@autodetected) {
- next if (!$p->{port}) ||
- (($p->{port} =~ m!/usb!) && ($bus ne "usb")) ||
- (($p->{port} =~ m!/dev/(lp|par.*|printer.*)\d+!) &&
- ($bus ne "par"));
- next if !$p->{val}{MODEL};
- if (uc($p->{val}{MODEL}) ne uc($model)) {
- my $entry = hplip_device_entry($p->{port}, @autodetected);
- next if !$entry;
- my $m = $entry->{model};
- $m =~ s/_/ /g;
- next if uc($m) ne uc($model);
- }
- next if ($serial && !$p->{val}{SERIALNUMBER}) ||
- (!$serial && $p->{val}{SERIALNUMBER}) ||
- (uc($serial) ne uc($p->{val}{SERIALNUMBER}));
- if ($device) {
- if ($bus eq "par") {
- $device =~ m!/dev/(lp|parport|printer/)(\d+)!;
- my $parporthplip = $1;
- $p->{port} =~ m!/dev/(lp|parport|printer/)(\d+)!;
- my $parportauto = $1;
- next if $parporthplip != $parportauto;
- } else {
- next if $device ne $p->{port};
- }
- }
- return $p;
- }
- } elsif ($uri =~ m!^ptal://?mlc:!) {
- # HP multi-function device (controlled by HPOJ)
- my $ptaldevice = $uri;
- $ptaldevice =~ s!^ptal://?mlc:!!;
- if ($ptaldevice =~ /^par:(\d+)$/) {
- my $device = "/dev/lp$1";
- foreach my $p (@autodetected) {
- next if !$p->{port} ||
- $p->{port} ne $device;
- return $p;
- }
- } else {
- my $model = $2 if $ptaldevice =~ /^(usb|par):(.*)$/;
- $model =~ s/_/ /g;
- foreach my $p (@autodetected) {
- next if !$p->{val}{MODEL} ||
- $p->{val}{MODEL} ne $model;
- return $p;
- }
- }
- } elsif ($uri =~ m!^(socket|smb|file|parallel|usb|serial):/!) {
- # Local print-only device, Ethernet-(TCP/Socket)-connected printer,
- # or printer on Windows server
- my $device = $uri;
- $device =~ s/^(file|parallel|usb|serial)://;
- foreach my $p (@autodetected) {
- next if !$p->{port} ||
- $p->{port} ne $device;
- return $p;
- }
- }
- return undef;
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of HP printers and multi-function devices with HPLIP
-#
-# ------------------------------------------------------------------
-
-sub read_hplip_db {
-
- # Read the device database XML file which comes with the HPLIP
- # package
- open(my $F, "< $::prefix/usr/share/hplip/data/xml/models.xml") or
- warn "Could not read /usr/share/hplip/data/xml/models.xml\n";
-
- my $entry = {};
- my $inentry = 0;
- my $inrX = 0;
- my $incomment = 0;
- my %hplipdevices;
- local $_;
- while (<$F>) {
- chomp;
- if ($incomment) {
- # In a comment block, skip all except the end of the comment
- if (m!^(.*?)-->(.*)$!) {
- # End of comment, keep rest of line
- $_ = $2;
- $incomment = 0;
- } else {
- # Skip line
- $_ = '';
- }
- } else {
- while (m/^(.*?)<!--(.*?)-->(.*)$/) {
- # Remove one-line comments
- $_ = $1 . $3;
- }
- if (m/^(.*?)<!--(.*)$/) {
- # Start of comment, keep the beginning of the line
- $_ = $1;
- $incomment = 1;
- }
- }
- # Is there some non-comment part left in the line
- if (m!\S!) {
- if ($inentry) {
- # We are inside a device entry
- if ($inrX) {
- # We are in one of the the device's <rX> sections,
- # skip the section
- if (m!^\s*</r\d+>\s*$!) {
- # End of <rX> section
- $inrX = 0;
- }
- } else {
- if (m!^\s*<r\d+>\s*$!) {
- # Start of <rX> section
- $inrX = 1;
- } elsif (m!^\s*</model>\s*$!) {
- # End of device entry
- $inentry = 0;
- my $devidmodel;
- if ($entry->{$devidmodel}) {
- $devidmodel = $entry->{devidmodel};
- $devidmodel =~ s/ /_/g;
- } else {
- $devidmodel = $entry->{model};
- }
- $hplipdevices{$devidmodel} = $entry;
- $entry = {};
- } elsif (m!^\s*<id>\s*([^<>]+)\s*</id>\s*$!) {
- # Full ID string
- my $idstr = $1;
- $idstr =~ m!(MFG|MANUFACTURER):([^;]+);!i
- and $entry->{devidmake} = $2;
- $idstr =~ m!(MDL|MODEL):([^;]+);!i
- and $entry->{devidmodel} = $2;
- $idstr =~ m!(DES|DESCRIPTION):([^;]+);!i
- and $entry->{deviddesc} = $2;
- $idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i
- and $entry->{devidcmdset} = $2;
- } elsif (m!^\s*<io support="(\d+)".*/>\s*$!) {
- # Input/Output ports explicitly supported by HPLIP
- my $ports = $1;
- $entry->{bus}{par} = 1 if ($ports & 1);
- $entry->{bus}{usb} = 1 if ($ports & 2);
- $entry->{bus}{net} = 1 if ($ports & 4);
- } elsif (m!^\s*<tech type="(\d+)"/>\s*$!) {
- # Printing technology
- $entry->{tech} = $1;
- } elsif (m!^\s*<align type="(\d+)"/>\s*$!) {
- # Head alignment type
- $entry->{align} = $1;
- } elsif (m!^\s*<clean type="(\d+)"/>\s*$!) {
- # Head cleaning type
- $entry->{clean} = $1;
- } elsif (m!^\s*<color-cal type="(\d+)"/>\s*$!) {
- # Color calibration type
- $entry->{colorcal} = $1;
- } elsif (m!^\s*<status type="(\d+)"/>\s*$!) {
- # Status request type
- $entry->{status} = $1;
- } elsif (m!^\s*<scan type="(\d+)"/>\s*$!) {
- # Scanner access type
- $entry->{scan} = $1;
- } elsif (m!^\s*<fax type="(\d+)"/>\s*$!) {
- # Fax access type
- $entry->{fax} = $1;
- } elsif (m!^\s*<pcard type="(\d+)"/>\s*$!) {
- # Memory card access type
- $entry->{card} = $1;
- } elsif (m!^\s*<copy type="(\d+)"/>\s*$!) {
- # Copier access type
- $entry->{copy} = $1;
- }
- }
- } else {
- # We are not in a printer entry
- if (m!^\s*<\s*model\s+name=\"(\S+)\"\a*>\s*$!) {
- $inentry = 1;
- # HPLIP model ID
- $entry->{model} = $1;
- }
- }
- }
- }
- close $F;
- return \%hplipdevices;
-}
-
-sub hplip_simple_model {
- my ($model) = @_;
- my $simplemodel = $model;
- $simplemodel =~ s/[^A-Za-z0-9]//g;
- $simplemodel =~ s/HewlettPackard/HP/gi;
- $simplemodel =~ s/HP//gi;
- $simplemodel =~ s/(DeskJet\d+C?)([a-z]*?)/$1/gi;
- $simplemodel =~ s/((LaserJet|OfficeJet|PhotoSmart|PSC)\d+)([a-z]*?)/$1/gi;
- $simplemodel =~ s/DeskJet/DJ/gi;
- $simplemodel =~ s/PhotoSmartP/PhotoSmart/gi;
- $simplemodel =~ s/LaserJet/LJ/gi;
- $simplemodel =~ s/OfficeJet/OJ/gi;
- $simplemodel =~ s/Series//gi;
- $simplemodel = uc($simplemodel);
- return $simplemodel;
-}
-
-sub hplip_device_entry {
- my ($device, @autodetected) = @_;
-
- # Currently, only local or TCP/Socket device work
- return undef if ($device !~ /usb/i) &&
- ($device !~ m!/dev/(lp|par.*|printer.*)\d+!) &&
- ($device !~ m!^socket://!i);
-
- if (!$hplipdevicesdb) {
- # Read the HPLIP device database if not done already
- $hplipdevicesdb = read_hplip_db();
- }
-
- my $entry;
- foreach my $a (@autodetected) {
- $device eq $a->{port} or next;
- # Only HP devices supported
- return undef if $a->{val}{MANUFACTURER} !~ /^\s*HP\s*$/i;
- my $modelstr = $a->{val}{MODEL};
- $modelstr =~ s/ /_/g;
- if ($entry = $hplipdevicesdb->{$modelstr}) {
- # Exact match
- return $entry;
- }
- my $hpmodelstr = "HP_" . $modelstr;
- if ($entry = $hplipdevicesdb->{$hpmodelstr}) {
- # Exact match
- return $entry;
- }
- my $hpmodelstr = "hp_" . $modelstr;
- if ($entry = $hplipdevicesdb->{$hpmodelstr}) {
- # Exact match
- return $entry;
- }
- # More 'fuzzy' matching
- my $simplemodel = hplip_simple_model($modelstr);
- foreach my $key (keys %{$hplipdevicesdb}) {
- my $simplekey = hplip_simple_model($key);
- return $hplipdevicesdb->{$key} if $simplemodel eq $simplekey;
- }
- foreach my $key (keys %{$hplipdevicesdb}) {
- my $simplekey = hplip_simple_model($key);
- $simplekey =~ s/(\d\d)00(C?)$/$1\\d\\d$2/;
- $simplekey =~ s/(\d\d\d)0(C?)$/$1\\d$2/;
- $simplekey =~ s/(\d\d)0(\dC?)$/$1\\d$2/;
- return $hplipdevicesdb->{$key} if
- $simplemodel =~ m/^$simplekey$/i;
- }
- # Device not supported
- return undef;
- }
- # $device not in @autodetected
- return undef;
-}
-
-sub hplip_device_entry_from_uri {
- my ($deviceuri) = @_;
-
- return undef if $deviceuri !~ m!^hp:/!;
-
- if (!$hplipdevicesdb) {
- # Read the HPLIP device database if not done already
- $hplipdevicesdb = read_hplip_db();
- }
-
- $deviceuri =~ m!^hp:/(usb|par|net)/(\S+?)(\?\S+|)$!;
- my $model = $2;
- return undef if !$model;
-
- my $entry;
- if ($entry = $hplipdevicesdb->{$model}) {
- return $entry;
- }
- return undef;
-}
-
-sub start_hplip {
- my ($device, $hplipentry, @autodetected) = @_;
-
- # Determine connection type
- my $bus;
- if ($device =~ /usb/) {
- $bus = "usb";
- } elsif ($device =~ m!/dev/(lp|par.*|printer.*)\d+!) {
- $bus = "par";
- } elsif ($device =~ m!^socket://!) {
- $bus = "net";
- } else {
- return undef;
- }
-
- # Start HPLIP daemons
- printer::services::start_not_running_service("hplip");
-
- # Determine HPLIP device URI for the CUPS queue
- if ($bus eq "net") {
- $device =~ m!^socket://([^:]+)(|:\d+)$!;
- my $host = $1;
- my $ip;
- if ($host !~ m!^\d+\.\d+\.\d+\.\d+$!) {
- my $addr = gethostbyname("$host");
- my ($a,$b,$c,$d) = unpack('C4',$addr);
- $ip = sprintf("%d.%d.%d.%d", $a, $b, $c, $d);
- } else {
- $ip = $host;
- }
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /usr/bin/hp-makeuri $ip\" |") or
- die "Could not run \"/usr/bin/hp-makeuri $ip\"!";
- while (my $line = <$F>) {
- if ($line =~ m!(hp:/net/\S+)!) {
- my $uri = $1;
- close $F;
- return $uri;
- }
- }
- close $F;
- } else {
- foreach my $a (@autodetected) {
- $device eq $a->{port} or next;
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /usr/$lib/cups/backend/hp\" |") or
- die "Could not run \"/usr/$lib/cups/backend/hp\"!";
- while (my $line = <$F>) {
- if (($line =~ m!^direct\s+(hp:/$bus/(\S+?)\?serial=(\S+))\s+!) ||
- ($line =~ m!^direct\s+(hp:/$bus/(\S+?)\?device=()(\S+))\s+!) ||
- ($line =~ m!^direct\s+(hp:/$bus/(\S+))\s+!)) {
- my $uri = $1;
- my $modelstr = $2;
- my $serial = $3;
- my $devicestr = $4;
- $devicestr =~ m!/dev/(lp|parport|printer/)(\d+)!;
- my $parporthplip = $1;
- $device =~ m!/dev/(lp|parport|printer/)(\d+)!;
- my $parportdevice = $1;
- if ((uc($modelstr) eq uc($hplipentry->{model})) &&
- (!$serial ||
- (uc($serial) eq uc($a->{val}{SERIALNUMBER}))) &&
- (!$devicestr ||
- ($devicestr eq $device) ||
- (($parporthplip ne "") &&
- ($parportdevice ne "") &&
- ($parporthplip == $parportdevice)))) {
- close $F;
- return $uri;
- }
- }
- }
- close $F;
- last;
- }
- }
- # HPLIP URI not found
- return undef;
-}
-
-sub start_hplip_manual {
-
- # Start HPLIP daemons
- printer::services::start_not_running_service("hplip");
-
- # Return all possible device URIs
- open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /usr/$lib/cups/backend/hp\" |") or
- die "Could not run \"/usr/$lib/cups/backend/hp\"!";
- my @uris;
- while (<$F>) {
- m!^direct\s+(hp:\S+)\s+!;
- push(@uris, $1);
- }
- return @uris;
-}
-
-sub remove_hpoj_config {
- my ($device, @autodetected) = @_;
-
- for my $d (@autodetected) {
- $device eq $d->{port} or next;
- my $bus;
- if ($device =~ /usb/) {
- $bus = "usb";
- } elsif ($device =~ m!/dev/(lp|par.*|printer.*)\d+!) {
- $bus = "par";
- } elsif ($device =~ /socket/) {
- $bus = "hpjd";
- }
- my $path = "$::prefix/etc/ptal";
- opendir PTALDIR, "$path";
- while (my $file = readdir(PTALDIR)) {
- next if $file !~ /^(mlc:|)$bus:/;
- $file = "$path/$file";
- if ($bus eq "hpjd") {
- $device =~ m!^socket://(\S+?)(:\d+|)$!;
- my $host = $1;
- if ($file =~ /$host/) {
- closedir PTALDIR;
- unlink($file) or return $file;
- printer::services::restart("hpoj");
- return undef;
- }
- } else {
- if ((grep { /$d->{val}{MODEL}/ } chomp_(cat_($file))) &&
- ((!$d->{val}{SERIALNUMBER}) ||
- (grep { /$d->{val}{SERIALNUMBER}/ }
- chomp_(cat_($file))))) {
- closedir PTALDIR;
- unlink($file) or return $file;
- printer::services::restart("hpoj");
- return undef;
- }
- }
- }
- last;
- }
- closedir PTALDIR;
- return undef;
-}
-
-sub devicefound {
- my ($usbid, $model, $serial) = @_;
- # Compare the output of "lsusb -vv" with the elements of the device
- # ID string
- if ($serial && $usbid->{SERIALNUMBER} eq $serial) {
- # Match of serial number has absolute priority
- return 1;
- } elsif ($model && $usbid->{MODEL} eq $model) {
- # Try to match the model name otherwise
- return 1;
- }
- return 0;
-}
-
-sub usbdevice {
- my ($usbid) = @_;
- # Run "lsusb -vv" and search the given device to get its USB bus and
- # device numbers
- open(my $F, ($::testing ? "" : "chroot $::prefix/ ") .
- '/bin/sh -c "export LC_ALL=C; lsusb -vv 2> /dev/null" |')
- or return undef;
- my ($bus, $device, $model, $serial) = ("", "", "", "");
- my $found = 0;
- while (my $line = <$F>) {
- chomp $line;
- if ($line =~ m/^\s*Bus\s+(\d+)\s+Device\s+(\d+)\s*:/i) {
- # head line of a new device
- my ($newbus, $newdevice) = ($1, $2);
- last if (($model || $serial) &&
- ($found = devicefound($usbid, $model, $serial)));
- ($bus, $device) = ($newbus, $newdevice);
- } elsif ($line =~ m/^\s*iProduct\s+\d+\s+(.+)$/i) {
- # model line
- next if $device eq "";
- $model = $1;
- } elsif ($line =~ m/^\s*iSerial\s+\d+\s+(.+)$/i) {
- # model line
- next if $device eq "";
- $serial = $1;
- }
- }
- close $F;
- # Check last entry
- $found = devicefound($usbid, $model, $serial);
-
- return 0 if !$found;
- return sprintf("%%%03d%%%03d", $bus, $device);
-}
-
-sub config_sane {
- my ($backend) = @_;
-
- # Add HPOJ/HPLIP backend to /etc/sane.d/dll.conf if needed (no
- # individual config file /etc/sane.d/hplip.conf or
- # /etc/sane.d/hpoj.conf necessary, the HPLIP and HPOJ drivers find
- # the scanner automatically)
-
- return if (! -f "$::prefix/etc/sane.d/dll.conf");
- return if member($backend,
- chomp_(cat_("$::prefix/etc/sane.d/dll.conf")));
- eval { append_to_file("$::prefix/etc/sane.d/dll.conf",
- "$backend\n") } or
- die "can not write SANE config in /etc/sane.d/dll.conf: $!";
-}
-
-sub setcupslink {
- my ($printer) = @_;
- return 1 if !$::isInstall || $printer->{SPOOLER} ne "cups" || -d "/etc/cups/ppd";
- system("ln -sf $::prefix/etc/cups /etc/cups");
- return 1;
-}
-
-
-1;