summaryrefslogtreecommitdiffstats
path: root/perl-install/printer/main.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer/main.pm')
-rw-r--r--perl-install/printer/main.pm508
1 files changed, 49 insertions, 459 deletions
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 0e45f79e9..25f58474b 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -20,9 +20,6 @@ use vars qw(@ISA @EXPORT);
@ISA = qw(Exporter);
@EXPORT = qw(%printer_type %printer_type_inv);
-#-Did we already read the subroutines of /usr/sbin/ptal-init?
-my $ptalinitread = 0;
-
our %printer_type = (
N("Local printer") => "LOCAL",
N("Remote printer") => "REMOTE",
@@ -316,14 +313,17 @@ sub read_configured_queues($) {
}
}
close $F;
+ # Mark that we have a CUPS queue but do not know the
+ # name the PPD file in /usr/share/cups/model
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} ||= '1';
+ # Mark that our PPD file is not a Foomatic one
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = "PPD";
+ } else {
+ # We do not have a PPD file for this queue
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = undef;
+ # No PPD found? Then we have a raw queue
+ $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = "raw";
}
- # Mark that we have a CUPS queue but do not know the name
- # the PPD file in /usr/share/cups/model
- if ((!$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd}) &&
- (! -r $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd})) {
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = '1';
- }
- $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = 'PPD';
$printer->{OLD_QUEUE} = "";
}
$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= "";
@@ -2466,6 +2466,7 @@ sub autodetectionentry_for_uri {
# HP printer (controlled by HPLIP)
my $hplipdevice = $uri;
$hplipdevice =~ m!^hp:/(usb|par|net)/(\S+?)(\?(serial|device)=(\S+)|)$!;
+ my $bus = $1;
my $model = $2;
my $serial = undef;
my $device = undef;
@@ -2476,6 +2477,10 @@ sub autodetectionentry_for_uri {
}
$model =~ s/_/ /g;
foreach my $p (@autodetected) {
+ next if (!$p->{port}) ||
+ (($p->{port} =~ m!/usb!) && ($bus ne "usb")) ||
+ (($p->{port} =~ m!/dev/(lp|par.*|printer.*)\d+!) &&
+ ($bus ne "par"));
next if !$p->{val}{MODEL};
if (uc($p->{val}{MODEL}) ne uc($model)) {
my $entry = hplip_device_entry($p->{port}, @autodetected);
@@ -2487,7 +2492,17 @@ sub autodetectionentry_for_uri {
next if ($serial && !$p->{val}{SERIALNUMBER}) ||
(!$serial && $p->{val}{SERIALNUMBER}) ||
(uc($serial) ne uc($p->{val}{SERIALNUMBER}));
- next if $device && ($device ne $p->{port});
+ if ($device) {
+ if ($bus eq "par") {
+ $device =~ m!/dev/(lp|parport|printer/)(\d+)!;
+ my $parporthplip = $1;
+ $p->{port} =~ m!/dev/(lp|parport|printer/)(\d+)!;
+ my $parportauto = $1;
+ next if $parporthplip != $parportauto;
+ } else {
+ next if $device ne $p->{port};
+ }
+ }
return $p;
}
} elsif ($uri =~ m!^ptal://?mlc:!) {
@@ -2526,7 +2541,7 @@ sub autodetectionentry_for_uri {
# ------------------------------------------------------------------
#
-# Configuration of HP multi-function devices
+# Configuration of HP printers and multi-function devices with HPLIP
#
# ------------------------------------------------------------------
@@ -2535,7 +2550,7 @@ sub read_hplip_db {
# Read the device database XML file which comes with the HPLIP
# package
open(my $F, "< $::prefix/usr/share/hplip/data/xml/models.xml") or
- die "Could not read /usr/share/hplip/data/xml/models.xml\n";
+ warn "Could not read /usr/share/hplip/data/xml/models.xml\n";
my $entry = {};
my $inentry = 0;
@@ -2604,6 +2619,12 @@ sub read_hplip_db {
and $entry->{deviddesc} = $2;
$idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i
and $entry->{devidcmdset} = $2;
+ } elsif (m!^\s*<io support="(\d+)".*/>\s*$!) {
+ # Input/Output ports explicitly supported by HPLIP
+ my $ports = $1;
+ $entry->{bus}{par} = 1 if ($ports & 1);
+ $entry->{bus}{usb} = 1 if ($ports & 2);
+ $entry->{bus}{net} = 1 if ($ports & 4);
} elsif (m!^\s*<tech type="(\d+)"/>\s*$!) {
# Printing technology
$entry->{tech} = $1;
@@ -2667,8 +2688,10 @@ sub hplip_simple_model {
sub hplip_device_entry {
my ($device, @autodetected) = @_;
- # Currently, only devices on USB or TCP/Socket work
- return undef if ($device !~ /usb/i) && ($device !~ m!^socket://!i);
+ # Currently, only local or TCP/Socket device work
+ return undef if ($device !~ /usb/i) &&
+ ($device !~ m!/dev/(lp|par.*|printer.*)\d+!) &&
+ ($device !~ m!^socket://!i);
if (!$hplipdevicesdb) {
# Read the HPLIP device database if not done already
@@ -2745,9 +2768,7 @@ sub start_hplip {
my $bus;
if ($device =~ /usb/) {
$bus = "usb";
- } elsif ($device =~ /par/ ||
- $device =~ m!/dev/lp! ||
- $device =~ /printers/) {
+ } elsif ($device =~ m!/dev/(lp|par.*|printer.*)\d+!) {
$bus = "par";
} elsif ($device =~ m!^socket://!) {
$bus = "net";
@@ -2795,19 +2816,26 @@ sub start_hplip {
my $modelstr = $2;
my $serial = $3;
my $devicestr = $4;
+ $devicestr =~ m!/dev/(lp|parport|printer/)(\d+)!;
+ my $parporthplip = $1;
+ $device =~ m!/dev/(lp|parport|printer/)(\d+)!;
+ my $parportdevice = $1;
if ((uc($modelstr) eq uc($hplipentry->{model})) &&
(!$serial ||
(uc($serial) eq uc($a->{val}{SERIALNUMBER}))) &&
(!$devicestr ||
- ($devicestr eq $device))) {
+ ($devicestr eq $device) ||
+ (($parporthplip ne "") &&
+ ($parportdevice ne "") &&
+ ($parporthplip == $parportdevice)))) {
close $F;
return $uri;
}
}
}
close $F;
+ last;
}
- last;
}
# HPLIP URI not found
return undef;
@@ -2838,9 +2866,7 @@ sub remove_hpoj_config {
my $bus;
if ($device =~ /usb/) {
$bus = "usb";
- } elsif ($device =~ /par/ ||
- $device =~ m!/dev/lp! ||
- $device =~ /printers/) {
+ } elsif ($device =~ m!/dev/(lp|par.*|printer.*)\d+!) {
$bus = "par";
} elsif ($device =~ /socket/) {
$bus = "hpjd";
@@ -2875,391 +2901,6 @@ sub remove_hpoj_config {
}
closedir PTALDIR;
return undef;
-}
-
-sub configure_hpoj {
- my ($device, @autodetected) = @_;
-
- # Make the subroutines of /usr/sbin/ptal-init available
- # It's only necessary to read it at the first call of this subroutine,
- # the subroutine definitions stay valid after leaving this subroutine.
- if (!$ptalinitread) {
- open(my $PTALINIT, "$::prefix/usr/sbin/ptal-init") or do {
- die "unable to open $::prefix/usr/sbin/ptal-init";
- };
- my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init
- local $_;
- while (<$PTALINIT>) {
- if (m!sub main!) {
- last;
- } elsif (m!^[^#]! && !(m!^\s*exec\b!)) {
- # Comment lines and the "exec" line (probably obsolete
- # Red Hat workaround) are skipped.
-
- # Make the subroutines also working during installation
- if ($::isInstall) {
- s!\$::prefix!\$hpoj_prefix!g;
- s!prefix="/usr"!prefix="$::prefix/usr"!g;
- s!etcPtal="/etc/ptal"!etcPtal="$::prefix/etc/ptal"!g;
- s!varLock="/var/lock"!varLock="$::prefix/var/lock"!g;
- s!varRunPrefix="/var/run"!varRunPrefix="$::prefix/var/run"!g;
- s!/sbin/lsmod!/usr/bin/lsmod!g;
- s!/sbin/modprobe!/usr/bin/modprobe!g;
- s!/sbin/rmmod!/usr/bin/rmmod!g;
- s!(my\s*\$osPlatform\s*=\s*).*?$!$1"Linux";!g;
- s!chomp\s*\$osPlatform\s*;\s*$!!g;
- s!(my\s*\$linuxVersion\s*=\s*).*?$!$1"$kernelversion";!g;
- s!^\s*\$linuxVersion\s*=~\s*s.*$!!g;
- s!chomp\s*\$linuxVersion\s*;\s*$!!g;
- s!(my\s*\$usbprintermodule\s*=\s*).*?$!$1"$usbprintermodule";!g;
- }
- push @ptalinitfunctions, $_;
- }
- }
- close $PTALINIT;
-
- eval "package printer::hpoj;
- @ptalinitfunctions
- sub getDevnames {
- return (%devnames)
- }
- sub getConfigInfo {
- return (%configInfo)
- }";
-
- if ($::isInstall) {
- # Needed for photo card reader detection during installation
- system("ln -s $::prefix/var/run/ptal-mlcd /var/run/ptal-mlcd");
- system("ln -s $::prefix/etc/ptal /etc/ptal");
- }
- $ptalinitread = 1;
- }
-
- # Read the HPOJ config file and check whether this device is already
- # configured
- printer::hpoj::setupVariables();
- printer::hpoj::readDeviceInfo();
-
- $device =~ m!^/dev/\S*lp(\d+)$! or
- $device =~ m!^/dev/printers/(\d+)$! or
- $device =~ m!^socket://([^:]+)$! or
- $device =~ m!^socket://([^:]+):(\d+)$!;
- my $model = $1;
- my ($model_long, $serialnumber, $serialnumber_long) = ("", "", "");
- my $cardreader = 0;
- my $device_ok = 1;
- my $bus;
- my $address_arg = "";
- my $base_address = "";
- my $hostname = "";
- my $port = $2;
- if ($device =~ /usb/) {
- $bus = "usb";
- } elsif ($device =~ /par/ ||
- $device =~ m!/dev/lp! ||
- $device =~ /printers/) {
- $bus = "par";
- $address_arg = printer::detect::parport_addr($device);
- eval "$base_address = $1" if $address_arg =~ /^\s*-base\s+(\S+)/;
- } elsif ($device =~ /socket/) {
- $bus = "hpjd";
- $hostname = $model;
- return "" if $port && ($port < 9100 || $port > 9103);
- if ($port && $port != 9100) {
- $port -= 9100;
- $hostname .= ":$port";
- }
- } else {
- return "";
- }
- if ($#autodetected < 0) {
- # Make a pseudo structure for the auto-detected data if there is
- # no auto-detected data (for example when configuring manually)
- $autodetected[0] = {
- 'port' => $device,
- 'val' => {
- 'MODEL' => N("Unknown model")
- }
- };
- }
- foreach (@autodetected) {
- $device eq $_->{port} or next;
- # $model is for the PTAL device name, so make sure that it is unique
- # so in the case of the model name auto-detection having failed leave
- # the port number or the host name as model name.
- my $searchunknown = N("Unknown model");
- if ($_->{val}{MODEL} &&
- $_->{val}{MODEL} !~ /$searchunknown/i &&
- $_->{val}{MODEL} !~ /^\s*$/) {
- $model = $_->{val}{MODEL};
- }
- $serialnumber = $_->{val}{SERIALNUMBER};
- services::stop("hpoj") if $bus ne "hpjd";
- # Check if the device is really an HP multi-function device
- #my $libusb = 0;
- foreach my $libusb (0, 1) {
- # Do access via libusb/user mode only if we have a USB device
- next if $libusb && $bus ne "usb";
- # Preliminary workaround to make the user-mode USB devices
- # (LIDIL devices) installable as verification of the HPOJ
- # settings of these devices does not work yet. The workaround
- # will probably removed after version 9.2 of this distribution.
- # Note: This workaround leaves out the checking for a photo
- # memory card reader, but to my knowledge there are no LIDIL
- # devices with card reader yet.
- if ($libusb) {
- $device_ok = 1;
- next;
- }
- my $printermoduleunloaded = 0;
- if ($bus ne "hpjd") {
- if (!$libusb) {
- # Start ptal-mlcd daemon for locally connected devices
- # (kernel mode with "printer"/"usblp" module for USB).
- run_program::rooted($::prefix,
- "ptal-mlcd", "$bus:probe",
- (($bus ne "par") ||
- (!$address_arg) ?
- ("-device", $device) : ()),
- split(' ',$address_arg));
- } else {
- # Start ptal-mlcd daemon for user-mode USB devices
- # (all LIDIL MF devices as HP PSC 1xxx and OfficeJet
- # 4xxx)
- my $usbdev = usbdevice($_->{val});
- if (defined($usbdev)) {
- # Unload kernel module "printer"/"usblp"
- if (modules::any_conf->read->get_probeall("usb-interface")) {
- eval(modules::unload($usbprintermodule));
- $printermoduleunloaded = 1;
- }
- # Start ptal-mlcd
- run_program::rooted($::prefix,
- "ptal-mlcd", "$bus:probe",
- "-device", $usbdev);
- } else {
- # We could not determine the USB device number,
- # so we cannot check this device in user mode
- next;
- }
- }
- }
- $device_ok = 0;
- my $ptalprobedevice = $bus eq "hpjd" ? "hpjd:$hostname" : "mlc:$bus:probe";
- if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice |")) {
- my $devid = join("", <$F>);
- close $F;
- if ($devid) {
- $device_ok = 1;
- if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -mdl 2>/dev/null |")) {
- $model_long = join("", <$F>);
- close $F;
- chomp $model_long;
- # If SNMP or local port auto-detection failed but
- # HPOJ auto-detection succeeded, fill in model name
- # here.
- if (!$_->{val}{MODEL} ||
- $_->{val}{MODEL} =~ /$searchunknown/i ||
- $_->{val}{MODEL} =~ /^\s*$/) {
- if ($model_long =~ /:([^:;]+);/) {
- $_->{val}{MODEL} = $1;
- $model = $_->{val}{MODEL};
- $model =~ s/ /_/g;
- }
- }
- }
- if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -sern 2>/dev/null |")) { #-#
- $serialnumber_long = join("", <$F>);
- close $F;
- chomp $serialnumber_long;
- }
- $cardreader = 1 if printer::hpoj::cardReaderDetected($ptalprobedevice);
- }
- }
- if ($bus ne "hpjd") {
- # Stop ptal-mlcd daemon for locally connected devices
- if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . qq(ps auxwww | grep "ptal-mlcd $bus:probe" | grep -v grep | ))) {
- my $line = <$F>;
- if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
- my $pid = $1;
- kill 15, $pid;
- }
- close $F;
- }
- $printermoduleunloaded &&
- eval(modules::load($usbprintermodule));
- }
- last if $device_ok;
- }
- printer::services::start("hpoj") if $bus ne "hpjd";
- last;
- }
- # No, it is not an HP multi-function device.
- return "" if !$device_ok;
-
- # If $model_long and $serialnumber_long stay empty, fill them with
- # $model and $serialnumber
- $model_long ||= $model;
- $serialnumber_long ||= $serialnumber;
-
- # Determine the ptal device name from already existing config files
- my $ptalprefix =
- ($bus eq "hpjd" ? "hpjd:" : "mlc:$bus:");
- my $ptaldevice = printer::hpoj::lookupDevname($ptalprefix, $model_long,
- $serialnumber_long, $base_address);
-
- # It's all done for us, the device is already configured
- return $ptaldevice if defined($ptaldevice);
-
- # Determine the ptal name for a new device
- if ($bus eq "hpjd") {
- $ptaldevice = "hpjd:$hostname";
- } else {
- $ptaldevice = $model;
- $ptaldevice =~ s![\s/]+!_!g;
- $ptaldevice = "mlc:$bus:$ptaldevice";
- }
-
- # Delete any old/conflicting devices
- printer::hpoj::deleteDevice($ptaldevice);
- if ($bus eq "par") {
- while (1) {
- my $oldDevname = printer::hpoj::lookupDevname("mlc:par:",undef,undef,$base_address);
- last unless defined($oldDevname);
- printer::hpoj::deleteDevice($oldDevname);
- }
- }
-
- # Configure the device
-
- # Open configuration file
- open(my $CONFIG, "> $::prefix/etc/ptal/$ptaldevice") or
- die "Could not open /etc/ptal/$ptaldevice for writing!\n";
-
- # Write file header.
- my $date = chomp_(`date`);
- print $CONFIG
-qq(
-# Added $date by "printerdrake"
-
-# The basic format for this file is "key[+]=value".
-# If you say "+=" instead of "=", then the value is appended to any
-# value already defined for this key, rather than replacing it.
-
-# Comments must start at the beginning of the line. Otherwise, they may
-# be interpreted as being part of the value.
-
-# If you have multiple devices and want to define options that apply to
-# all of them, then put them in the file /etc/ptal/defaults, which is read
-# in before this file.
-
-# The format version of this file:
-# ptal-init ignores devices with incorrect/missing versions.
-init.version=2
-);
-
- # Write model string.
- if ($model_long !~ /\S/) {
- print $CONFIG
- "\n" .
- qq(# "printerdrake" couldn't read the model but added this device anyway:\n) .
- "# ";
- } else {
- print $CONFIG
- "\n" .
- "# The device model that was originally detected on this port:\n" .
- qq(# If this ever changes, then you should re-run "printerdrake"\n) .
- "# to delete and re-configure this device.\n";
- if ($bus eq "par") {
- print $CONFIG
- "# Comment out if you do not care what model is really connected to this\n" .
- "# parallel port.\n";
- }
- }
- print $CONFIG
- qq(init.mlcd.append+=-devidmatch "$model_long"\n);
-
- # Write serial-number string.
- if ($serialnumber_long !~ /\S/) {
- print $CONFIG
- "\n" .
- "# The device's serial number is unknown.\n" .
- "# ";
- } else {
- print $CONFIG
- "\n" .
- "# The serial number of the device that was originally detected on this port:\n";
- if ($bus =~ /^[pu]/) {
- print $CONFIG
- "# Comment out if you want to disable serial-number matching.\n";
- }
- }
- print $CONFIG
- qq(init.mlcd.append+=-devidmatch "$serialnumber_long"\n);
-
- if ($bus =~ /^[pu]/) {
- print $CONFIG
- "\n" .
- "# Standard options passed to ptal-mlcd:\n" .
- "init.mlcd.append+=";
- if ($bus eq "usb") {
- # Important: do not put more quotes around /dev/usb/lp[0-9]*,
- # because ptal-mlcd currently does no globbing:
- print $CONFIG "-device /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9 /dev/usb/lp10 /dev/usb/lp11 /dev/usb/lp12 /dev/usb/lp13 /dev/usb/lp14 /dev/usb/lp15";
- } elsif ($bus eq "par") {
- print $CONFIG "$address_arg" .
- (!$address_arg ? " -device $device" : "");
- }
- print $CONFIG "\n" .
- "\n" .
- "# ptal-mlcd's remote console can be useful for debugging, but may be a\n" .
- "# security/DoS risk otherwise. In any case, it's accessible with the\n" .
- qq(# command "ptal-connect mlc:<XXX>:<YYY> -service PTAL-MLCD-CONSOLE".\n) .
- "# Uncomment the following line if you want to enable this feature for\n" .
- "# this device:\n" .
- "# init.mlcd.append+=-remconsole\n" .
- "\n" .
- "# If you need to pass any other command-line options to ptal-mlcd, then\n" .
- "# add them to the following line and uncomment the line:\n" .
- "# init.mlcd.append+=\n" .
- "\n" .
- "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n" .
- "# then you may not be able to use ptal-printd, and you can uncomment the\n" .
- "# following line to disable ptal-printd for this device:\n" .
- "# init.printd.start=0\n";
- } else {
- print $CONFIG
- "\n" .
- "# By default ptal-printd is not started for hpjd: devices.\n" .
- "# If for some reason you want to start it for this device, then\n" .
- "# uncomment the following line:\n" .
- "init.printd.start=1\n";
- }
-
- print $CONFIG
- "\n" .
- "# If you need to pass any additional command-line options to ptal-printd,\n" .
- "# then add them to the following line and uncomment the line:\n" .
- "# init.printd.append+=\n";
- if ($cardreader) {
- print $CONFIG
- "\n" .
- "# Uncomment the following line to enable ptal-photod for this device:\n" .
- "init.photod.start=1\n" .
- "\n" .
- "# If you have more than one photo-card-capable peripheral and you want to\n" .
- "# assign particular TCP port numbers and mtools drive letters to each one,\n" .
- qq(# then change the line below to use the "-portoffset <n>" option.\n) .
- "init.photod.append+=-maxaltports 26\n";
- }
- close($CONFIG);
- printer::hpoj::readOneDevice($ptaldevice);
-
- # Restart HPOJ
- printer::services::restart("hpoj");
-
- # Return HPOJ device name to form the URI
- return $ptaldevice;
}
sub devicefound {
@@ -3327,57 +2968,6 @@ sub config_sane {
die "can not write SANE config in /etc/sane.d/dll.conf: $!";
}
-sub config_photocard() {
-
- # Add definitions for the drives p:. q:, r:, and s: to /etc/mtools.conf
- cat_("$::prefix/etc/mtools.conf") !~ m/^\s*drive\s+p:/m or return;
-
- append_to_file("$::prefix/etc/mtools.conf", <<'EOF');
-# Drive definitions added for the photo card readers in HP multi-function
-# devices driven by HPOJ
-drive p: file=":0" remote
-drive q: file=":1" remote
-drive r: file=":2" remote
-drive s: file=":3" remote
-# This turns off some file system integrity checks of mtools, it is needed
-# for some photo cards.
-mtools_skip_check=1
-EOF
-
- # Generate a config file for the graphical mtools frontend MToolsFM or
- # modify the existing one
- my $mtoolsfmconf;
- if (-f "$::prefix/etc/mtoolsfm.conf") {
- $mtoolsfmconf = cat_("$::prefix/etc/mtoolsfm.conf") or die "can not read MToolsFM config in $::prefix/etc/mtoolsfm.conf: $!";
- my $alloweddrives = lc($1) if $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*"([A-Za-z ]*)"/m;
- foreach my $letter ("p", "q", "r", "s") {
- $alloweddrives .= $letter if $alloweddrives !~ /$letter/;
- }
- $mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*"[A-Za-z ]*"/DRIVES="$alloweddrives"/m;
- $mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*"[^"]*"/LEFTDRIVE="p"/m;
- #"# Fix emacs syntax highlighting
- } else {
- $mtoolsfmconf = <<'EOF';
-# MToolsFM config file. comments start with a hash sign.
-#
-# This variable sets the allowed driveletters (all lowercase). Example:
-# DRIVES="ab"
-DRIVES="apqrs"
-#
-# This variable sets the driveletter upon startup in the left window.
-# An empty string or space is for the hardisk. Example:
-# LEFTDRIVE="a"
-LEFTDRIVE="p"
-#
-# This variable sets the driveletter upon startup in the right window.
-# An empty string or space is for the hardisk. Example:
-# RIGHTDRIVE="a"
-RIGHTDRIVE=" "
-EOF
- }
- output("$::prefix/etc/mtoolsfm.conf", $mtoolsfmconf);
-}
-
sub setcupslink {
my ($printer) = @_;
return 1 if !$::isInstall || $printer->{SPOOLER} ne "cups" || -d "/etc/cups/ppd";
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-04 08:19:54 +0000