diff options
Diffstat (limited to 'perl-install/printer.pm')
| -rw-r--r-- | perl-install/printer.pm | 210 |
1 files changed, 105 insertions, 105 deletions
diff --git a/perl-install/printer.pm b/perl-install/printer.pm index 5d3d9bb63..f7f31ced0 100644 --- a/perl-install/printer.pm +++ b/perl-install/printer.pm @@ -1,7 +1,7 @@ package printer; #-##################################################################################### -=head1 NAME +=head1 NAME printer - supply methods for manage the printer related files directory handles @@ -56,11 +56,11 @@ use commands; =item * -an entry in the 'printerdb' file, which describes each type of +an entry in the 'printerdb' file, which describes each type of supported printer: StartEntry: DeskJet550 - GSDriver: cdj550 + GSDriver: cdj550 Description: {HP DeskJet 550C/560C/6xxC series} About: { \ This driver supports the HP inkjet printers which have \ @@ -83,14 +83,14 @@ supported printer: Example of data-struct: - my %ex_printerdb_entry = + my %ex_printerdb_entry = ( ENTRY => "DeskJet550", #-Human-readable name of the entry GSDRIVER => "cdj550", #-gs driver used by this printer DESCR => "HP DeskJet 550C/560C/6xxC series", #-Single line description of printer ABOUT => " - This driver supports the HP inkjet printers which have - color capability using both black and color cartridges + This driver supports the HP inkjet printers which have + color capability using both black and color cartridges ...", #-Lengthy description of printer RESOLUTION => [ #-List of resolutions supported { @@ -110,79 +110,79 @@ Example of data-struct: =item * -A printcap entry only represents a subset of possible options available -Sufficient for the simple configuration we are interested in +A printcap entry only represents a subset of possible options available +Sufficient for the simple configuration we are interested in there is also some text in the template (.in) file in the spooldir - # /etc/printcap - # + # /etc/printcap + # # Please don't edit this file directly unless you know what you are doing # Be warned that the control-panel printtool requires a very strict forma - # Look at the printcap(5) man page for more info. - # - # This file can be edited with the printtool in the control-panel. - + # Look at the printcap(5) man page for more info. + # + # This file can be edited with the printtool in the control-panel. + ##PRINTTOOL3## LOCAL uniprint NAxNA letter {} U_NECPrinwriter2X necp2x6 1 - lpname:\ - :sd=/var/spool/lpd/lpnamespool:\ - :mx#45:\ - :sh:\ - :lp=/dev/device:\ - :if=/var/spool/lpd/lpnamespool/filter: - ##PRINTTOOL3## REMOTE st800 360x180 a4 {} EpsonStylus800 Default 1 - remote:\ - :sd=/var/spool/lpd/remotespool:\ - :mx#47:\ - :sh:\ - :rm=remotehost:\ - :rp=remotequeue:\ - :if=/var/spool/lpd/remotespool/filter: - ##PRINTTOOL3## SMB la75plus 180x180 letter {} DECLA75P Default {} - smb:\ - :sd=/var/spool/lpd/smbspool:\ - :mx#46:\ - :sh:\ - :if=/var/spool/lpd/smbspool/filter:\ - :af=/var/spool/lpd/smbspool/acct:\ - :lp=/dev/null: - ##PRINTTOOL3## NCP ap3250 180x180 letter {} EpsonAP3250 Default {} - ncp:\ - :sd=/var/spool/lpd/ncpspool:\ - :mx#46:\ - :sh:\ - :if=/var/spool/lpd/ncpspool/filter:\ - :af=/var/spool/lpd/ncpspool/acct:\ - :lp=/dev/null: + lpname:\ + :sd=/var/spool/lpd/lpnamespool:\ + :mx#45:\ + :sh:\ + :lp=/dev/device:\ + :if=/var/spool/lpd/lpnamespool/filter: + ##PRINTTOOL3## REMOTE st800 360x180 a4 {} EpsonStylus800 Default 1 + remote:\ + :sd=/var/spool/lpd/remotespool:\ + :mx#47:\ + :sh:\ + :rm=remotehost:\ + :rp=remotequeue:\ + :if=/var/spool/lpd/remotespool/filter: + ##PRINTTOOL3## SMB la75plus 180x180 letter {} DECLA75P Default {} + smb:\ + :sd=/var/spool/lpd/smbspool:\ + :mx#46:\ + :sh:\ + :if=/var/spool/lpd/smbspool/filter:\ + :af=/var/spool/lpd/smbspool/acct:\ + :lp=/dev/null: + ##PRINTTOOL3## NCP ap3250 180x180 letter {} EpsonAP3250 Default {} + ncp:\ + :sd=/var/spool/lpd/ncpspool:\ + :mx#46:\ + :sh:\ + :if=/var/spool/lpd/ncpspool/filter:\ + :af=/var/spool/lpd/ncpspool/acct:\ + :lp=/dev/null: Example of data-struct: - my %ex_printcap_entry = + my %ex_printcap_entry = ( QUEUE => "lpname", #-Queue name, can have multi separated by '|' - + #-if you want something different from the default SPOOLDIR => "/var/spool/lpd/lpnamespool/", #-Spool directory IF => "/var/spool/lpd/lpnamespool/filter", #-input filter - + #- commentaire inserer dans le printcap pour que printtool retrouve ses petits - DBENTRY => "DeskJet670", #-entry in printer database for this printer - + DBENTRY => "DeskJet670", #-entry in printer database for this printer + RESOLUTION => "NAxNA", #-ghostscript resolution to use PAPERSIZE => "letter", #-Papersize - BITSPERPIXEL => "necp2x6", #-ghostscript color option - CRLF => 1 , #-Whether or not to do CR/LF xlation - + BITSPERPIXEL => "necp2x6", #-ghostscript color option + CRLF => 1 , #-Whether or not to do CR/LF xlation + TYPE => "LOCAL", - + #- LOCAL DEVICE => "/dev/device", #-Print device - - #- REMOTE (lpd) printers only + + #- REMOTE (lpd) printers only REMOTEHOST => "remotehost", #-Remote host (not used for all entries) - REMOTEQUEUE => "remotequeue", #-Queue on the remote machine - - - #-SMB (LAN Manager) only + REMOTEQUEUE => "remotequeue", #-Queue on the remote machine + + + #-SMB (LAN Manager) only #- in spooldir/.config #-share='\\hostname\printername' #-hostip=1.2.3.4 @@ -191,27 +191,27 @@ Example of data-struct: #-workgroup='AS3' SMBHOST => "hostname", #-Server name (NMB name, can have spaces) SMBHOSTIP => "1.2.3.4", #-Can optional specify and IP address for host - SMBSHARE => "printername", #-Name of share on the SMB server - SMBUSER => "user", #-User to log in as on SMB server - SMBPASSWD => "passowrd", #-Corresponding password - SMBWORKGROUP => "AS3", #-SMB workgroup name + SMBSHARE => "printername", #-Name of share on the SMB server + SMBUSER => "user", #-User to log in as on SMB server + SMBPASSWD => "passowrd", #-Corresponding password + SMBWORKGROUP => "AS3", #-SMB workgroup name AF => "/var/spool/lpd/smbspool/acct", #-accounting filter (needed for smbprint) - - #- NCP (NetWare) only + + #- NCP (NetWare) only #- in spooldir/.config #-server=printerservername #-queue=queuename #-user=user #-password=pass - NCPHOST => "printerservername", #-Server name (NCP name) - NCPQUEUE => "queuename", #-Queue on server - NCPUSER => "user", #-User to log in as on NCP server - NCPPASSWD => "pass", #-Corresponding password - + NCPHOST => "printerservername", #-Server name (NCP name) + NCPQUEUE => "queuename", #-Queue on server + NCPUSER => "user", #-User to log in as on NCP server + NCPPASSWD => "pass", #-Corresponding password + ) ; -=cut +=cut #-##################################################################################### @@ -243,11 +243,11 @@ my $PRINTER_FILTER_DIR = "/usr/lib/rhs/rhs-printfilters"; "local" => "LOCAL", "Remote lpd" => "REMOTE", "SMB/Windows 95/NT" => "SMB", - "NetWare" => "NCP", + "NetWare" => "NCP", ); %printer_type_inv = reverse %printer_type; -%fields = ( +%fields = ( STANDARD => [qw(QUEUE SPOOLDIR IF)], SPEC => [qw(DBENTRY RESOLUTION PAPERSIZE BITSPERPIXEL CRLF)], LOCAL => [qw(DEVICE)], @@ -280,22 +280,22 @@ sub read_printer_db(;$) { local *DBPATH; #-don't have to do close open DBPATH, $dbpath or die "An error has occurred on $dbpath : $!"; - + while (<DBPATH>) { if (/^StartEntry:\s(\w*)/) { my $entryname = $1; my $entry; - + $entry->{ENTRY} = $entryname; - - WHILE : + + WHILE : while (<DBPATH>) { SWITCH: { /GSDriver:\s*(\w*)/ and do { $entry->{GSDRIVER} = $1; last SWITCH }; /Description:\s*{(.*)}/ and do { $entry->{DESCR} = $1; last SWITCH }; /About:\s*{(.*)}/ and do { $entry->{ABOUT} = $1; last SWITCH }; - /About:\s*{(.*)/ - and do + /About:\s*{(.*)/ + and do { my $string = "$1\n"; while (<DBPATH>) { @@ -303,9 +303,9 @@ sub read_printer_db(;$) { $string .= $_; } }; - /Resolution:\s*{(.*)}\s*{(.*)}\s*{(.*)}/ + /Resolution:\s*{(.*)}\s*{(.*)}\s*{(.*)}/ and do { push @{$entry->{RESOLUTION}}, { XDPI => $1, YDPI => $2, DESCR => $3 }; last SWITCH }; - /BitsPerPixel:\s*{(.*)}\s*{(.*)}/ + /BitsPerPixel:\s*{(.*)}\s*{(.*)}/ and do { push @{$entry->{BITSPERPIXEL}}, {DEPTH => $1, DESCR => $2}; last SWITCH }; /EndEntry/ and last WHILE; @@ -314,7 +314,7 @@ sub read_printer_db(;$) { $thedb{$entryname} = $entry; } } - + @entries_db_short = sort keys %printer::thedb; @entry_db_description = map { $printer::thedb{$_}{DESCR} } @entries_db_short; %descr_to_db = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short; @@ -324,7 +324,7 @@ sub read_printer_db(;$) { #-****************************************************************************** -#- write functions +#- write functions #-****************************************************************************** #------------------------------------------------------------------------------ @@ -333,30 +333,30 @@ sub read_printer_db(;$) { sub create_spool_dir($) { my ($queue_path) = @_; my $complete_path = "$prefix/$queue_path"; - + unless (-d $complete_path) { mkdir "$complete_path", 0755 or die "An error has occurred - can't create $complete_path : $!"; } - + #-redhat want that "drwxr-xr-x root lp" my $gid_lp = (getpwnam("lp"))[3]; - chown 0, $gid_lp, $complete_path + chown 0, $gid_lp, $complete_path or die "An error has occurred - can't chgrp $complete_path to lp $!"; } #------------------------------------------------------------------------------ #-given the input spec file 'input', and the target output file 'output' -#-we set the fields specified by fieldname to the values in fieldval -#-nval is the number of fields to set -#-Doesnt currently catch error exec'ing sed yet +#-we set the fields specified by fieldname to the values in fieldval +#-nval is the number of fields to set +#-Doesnt currently catch error exec'ing sed yet #------------------------------------------------------------------------------ sub create_config_file($$%) { my ($inputfile, $outpufile, %toreplace) = @_; my ($in, $out) = ("$prefix/$inputfile", "$prefix/$outpufile"); local *OUT; local *IN; - + #-TODO my $oldmask = umask 0755; open IN , $in or die "Can't open $in $!"; @@ -365,7 +365,7 @@ sub create_config_file($$%) { } else { open OUT, ">$out" or die "Can't open $out $!"; } - + while (<IN>) { if (/@@@(.*)@@@/) { my $r = $toreplace{$1}; @@ -389,7 +389,7 @@ sub copy_master_filter($) { } #------------------------------------------------------------------------------ -#- given a PrintCap Entry, create the spool dir and special +#- given a PrintCap Entry, create the spool dir and special #- rhs-printfilters related config files which are required #------------------------------------------------------------------------------ my $intro_printcap_test = " @@ -411,12 +411,12 @@ sub configure_queue($) { $entry->{SPOOLDIR} ||= "$spooldir"; $entry->{IF} ||= "$spooldir/$entry->{QUEUE}/filter"; $entry->{AF} ||= "$spooldir/$entry->{QUEUE}/acct"; - + my $queue_path = "$entry->{SPOOLDIR}"; create_spool_dir($queue_path); - my $get_name_file = sub { - my ($name) = @_; + my $get_name_file = sub { + my ($name) = @_; ("$PRINTER_FILTER_DIR/$name.in", "$entry->{SPOOLDIR}/$name") }; my ($filein, $file); @@ -431,13 +431,13 @@ sub configure_queue($) { $fieldname{printertype} = $entry->{TYPE}; create_config_file($filein, $file, %fieldname); - #- successfully created general.cfg, now do postscript.cfg + #- successfully created general.cfg, now do postscript.cfg ($filein, $file) = &$get_name_file("postscript.cfg"); %fieldname = (); $fieldname{gsdevice} = $dbentry->{GSDRIVER}; $fieldname{papersize} = $entry->{PAPERSIZES} ? $entry->{PAPERSIZES} : "letter"; $fieldname{resolution} = ($entry->{RESOLUTION} eq "Default") ? "Default" : ""; - $fieldname{color} = + $fieldname{color} = do { if ($dbentry->{GSDRIVER} eq "uniprint") { ($entry->{BITSPERPIXEL} eq "Default") ? "-dBitsPerPixel=Default" : ""; @@ -452,7 +452,7 @@ sub configure_queue($) { $fieldname{rtlftmar} = "18"; $fieldname{topbotmar} = "18"; create_config_file($filein, $file, %fieldname); - + #- finally, make textonly.cfg ($filein, $file) = &$get_name_file("textonly.cfg"); %fieldname = (); @@ -491,7 +491,7 @@ sub configure_queue($) { } else { open PRINTCAP, ">$prefix/etc/printcap" or die "Can't open printcap file $!"; } - + print PRINTCAP $intro_printcap_test; printf PRINTCAP "##PRINTTOOL3## %s %s %s %s %s %s %s \n", $entry->{TYPE}, @@ -503,14 +503,14 @@ sub configure_queue($) { $entry->{BITSPERPIXEL}, $entry->{CRLF} ? "1" : ""; - + print PRINTCAP "$entry->{QUEUE}:\\\n"; print PRINTCAP "\t:sd=$entry->{SPOOLDIR}:\\\n"; print PRINTCAP "\t:mx#0:\\\n\t:sh:\\\n"; - + if ($entry->{TYPE} eq "LOCAL") { print PRINTCAP "\t:lp=$entry->{DEVICE}:\\\n"; - } elsif ($entry->{TYPE} eq "REMOTE") { + } elsif ($entry->{TYPE} eq "REMOTE") { print PRINTCAP "\t:rm=$entry->{REMOTEHOST}:\\\n"; print PRINTCAP "\t:rp=$entry->{REMOTEQUEUE}:\\\n"; } else { @@ -521,12 +521,12 @@ sub configure_queue($) { #- cheating to get the input filter! print PRINTCAP "\t:if=$entry->{SPOOLDIR}/filter:\n"; - + } #------------------------------------------------------------------------------ -#- interface function +#- interface function #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ @@ -565,7 +565,7 @@ sub test { #-###################################################################################### #- Wonderful perl :( #-###################################################################################### -1; # +1; # =head1 AUTHOR |