diff options
Diffstat (limited to 'perl-install/modules.pm')
| -rw-r--r-- | perl-install/modules.pm | 826 |
1 files changed, 0 insertions, 826 deletions
diff --git a/perl-install/modules.pm b/perl-install/modules.pm deleted file mode 100644 index dce4c4d24..000000000 --- a/perl-install/modules.pm +++ /dev/null @@ -1,826 +0,0 @@ -package modules; # $Id$ - -use strict; -use vars qw(%drivers); - -use common; -use detect_devices; -use run_program; -use log; - - -my %conf; -my $scsi = 0; -my %deps = (); - -my @drivers_by_category = ( -[ 'net', { -if_(arch() =~ /ppc/, - "mace" => "Apple PowerMac Ethernet", - "bmac" => "Apple G3 Ethernet", - "gmac" => "Apple G4/iBook Ethernet", -), -if_(arch() =~ /^sparc/, - "myri_sbus" => "MyriCOM Gigabit Ethernet", - "sunbmac" => "Sun BigMac Ethernet", - "sunqe" => "Sun Quad Ethernet", -), -if_(arch() !~ /alpha/ && arch() !~ /sparc/, - "3c501" => "3com 3c501", - "3c503" => "3com 3c503", - "3c505" => "3com 3c505", - "3c507" => "3com 3c507", - "3c509" => "3com 3c509", - "3c515" => "3com 3c515", - "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)", - "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)", - "82596" => "Apricot 82596", - "abyss" => "Smart 16/4 PCI Ringnode (token ring)", - "ac3200" => "Ansel Communication AC3200", - "acenic" => "AceNIC Gigabit Ethernet", - "aironet4500_card" => "aironet4500_card", - "at1700" => "Allied Telesis AT1700", - "atp" => "ATP", - "catc" => "CATC EL1210A NetMate USB Ethernet driver", - "com20020-pci" => "com20020-pci", - "cs89x0" => "CS89x0", - "de600" => "D-Link DE-600 pocket adapter", - "de620" => "D-Link DE-620 pocket adapter", - "defxx" => "DEC DEFPA FDDI", # most unused - "depca" => "Digital DEPCA and EtherWORKS", - "dgrs" => "Digi International RightSwitch", - "dmfe" => "dmfe", - "e100" => "Intel Ethernet Pro 100", #- newer Intel version of eepro100 - "e1000" => "Intel Gigabit Ethernet", - "e2100" => "Cabletron E2100", - "eepro" => "Intel EtherExpress Pro", - "eepro100" => "Intel EtherExpress Pro 100", #- should run on sparc but no memory on floppy - "eexpress" => "Intel EtherExpress", - "epic100" => "SMC 83c170 EPIC/100", - "eth16i" => "ICL EtherTeam 16i", - "ewrk3" => "Digital EtherWORKS 3", - "hamachi" => "Packet Engines Inc.|PCI Ethernet Adapter", - "hp" => "HP LAN/AnyLan", - "hp-plus" => "HP PCLAN/plus", - "hp100" => "HP10/100VG any LAN ", - "ibmtr" => "Token Ring Tropic", - "kaweth" => "kaweth", -# requires scsi_mod??? "iph5526" => "iph5526", - "lance" => "Lance", - "natsemi" => "National Semiconductor 10/100", - "ne" => "NE1000, NE2000, and clones", - "ne2k-pci" => "NE2000 PCI clones", - "ni5010" => "NI 5010", - "ni52" => "NI 5210", - "ni65" => "NI 6510", - "old_tulip" => "Digital 21040/21041/21140 (old Tulip driver)", - "olympic" => "IBM|16/4 Token ring UTP/STP controller", - "pcnet32" => "AMD PC/Net 32", - "pegasus" => "pegasus", - "plip" => "PLIP (parallel port)", - "rcpci" => "Red Creek Hardware VPN", - "rrunner" => "Roadrunner serial HIPPI", # mostly unused - "sb1000" => "sb1000", - "sis900" => "sis900", - "sk98lin" => "Syskonnect (Schneider & Koch)|Gigabit Ethernet", - "sktr" => "Syskonnect Token ring adaptor", - "smc-ultra" => "SMC Ultra", - "smc9194" => "SMC 9000 series", - "starfire" => "Adaptec|ANA620xx/ANA69011A Fast Ethernet", - "tlan" => "Compaq Netelligent, Olicom OC-2xxx", - "tmspci" => "3Com Token Link Velocity, Compaq IPG-Austin Token Ring", - "tulip" => "Digital 21040/21041/21140 (Tulip)", - "via-rhine" => "VIA VT86c100A Rhine-II, 3043 Rhine-I", -# "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO is a "AT&T GIS WaveLAN ISA" ? - "wd" => "WD8003, WD8013 and compatible", - "winbond-840" => "Compex RL100-ATX", - "yellowfin" => "Symbios Yellowfin G-NIC", -#******(missing-2.4) "smc-ultra32" => "SMC Ultra 32", -#******(missing-2.4) "rl100a" => "rl100a", -#******(missing-2.4) "z85230" => "Z85x30", -), - "3c59x" => "3com Vortex/Boomerang/Hurricane/Cyclone/Etherlink", - "8139too" => "Realtek RTL-8139", - "de4x5" => "Digital 425,434,435,450,500", - "rtl8139" => "RealTek RTL8129/8139", - "sundance" => "sundance", - "sunhme" => "Sun Happy Meal Ethernet", -}], -[ 'net_raw', { - "8390" => "8390", - "af_packet" => "packet socket", - "nfs" => "Network File System (nfs)", - "lockd" => "lockd", - "parport" => "parport", - "parport_pc" => "parport_pc", - "sunrpc" => "sunrpc", - "pci-scan" => "pci-scan", - "ppp" => "Point to Point driver", - "ppp_generic" => "Point to Point generic driver", - "ppp_async" => "ppp_async", - "slhc" => "slhc", -}], -[ 'usbnet', { - "pegasus" => "pegasus", - "kaweth" => "kaweth", - "usbnet" => "usbnet", - "catc" => "CATC EL1210A NetMate USB Ethernet driver", -}], -[ 'isdn', { - "hisax" => "hisax", - "hysdn" => "hysdn", - "b1pci" => "b1pci", - "t1pci" => "t1pci", - "c4" => "c4", -}], -[ 'tv', { - "bttv" => "Brooktree Corporation|Bt8xx Video Capture", - "cpia_usb" => '', - "ibmcam" => '', - "mod_quickcam" => '', - "ov511" => '', - "ultracam" => '', - "usbvideo" => '', -}], -[ 'scanner', { - "scanner" => '', - "microtek" => '', -}], -[ 'photo', { - "dc2xx" => '', - "mdc800" => '', -}], -[ 'joystick', { - "ns558" => "Creative Labs SB Live! joystick", -}], -[ 'radio', { - "radio-maxiradio" => "radio-maxiradio", -}], -[ 'scsi', { -if_(arch() =~ /ppc/, - "mesh" => "Apple Internal SCSI", - "mac53c94" => "Apple External SCSI", -), -if_(arch() =~ /^sparc/, - "qlogicpti" => "Performance Technologies ISP", -), -if_(arch() !~ /alpha/ && arch() !~ /sparc/, - "3w-xxxx" => "3ware ATA-RAID", - "53c7,8xx" => "NCR 53c7xx", - "AM53C974" => "AMD SCSI", - "BusLogic" => "BusLogic Adapters", - "NCR53c406a" => "NCR 53c406a", - "a100u2w" => "a100u2w", - "advansys" => "AdvanSys Adapters", - "aha152x" => "Adaptec 152x", - "aha1542" => "Adaptec 1542", - "aha1740" => "Adaptec 1740", - "atp870u" => "atp870u (Acard/Artop)", - "dc395x_trm" => "dc395x_trm", - "dtc" => "DTC 3180/3280", - "fdomain" => "Future Domain TMC-16x0", - "g_NCR5380" => "NCR 5380", - "in2000" => "Always IN2000", - "initio" => "Initio", - "pci2220i" => "Perceptive Solutions 2240I", - "psi240i" => "psi240i", - "qla1280" => "Q Logic QLA1280", - "qla2x00" => "Q Logic QLA2200", - "qlogicfas" => "Qlogic FAS", - "qlogicfc" => "qlogicfc", - "seagate" => "Seagate ST01/02", - "sim710" => "NCR53c710", - "sym53c416" => "sym53c416", - "t128" => "Trantor T128/T128F/T228", - "tmscsim" => "tmscsim", - "u14-34f" => "UltraStor 14F/34F", - "ultrastor" => "UltraStor 14F/24F/34F", - "wd7000" => "Western Digital wd7000", -), - "aic7xxx" => "Adaptec 2740, 2840, 2940", - "ncr53c8xx" => "NCR 53C8xx PCI", - "pci2000" => "Perceptive Solutions PCI-2000", # TODO - "qlogicisp" => "Qlogic ISP", - "sym53c8xx" => "Symbios 53c8xx", -}], -[ 'scsi_raw', { - "scsi_mod" => "SCSI subsystem support", - "sd_mod" => "Disk SCSI support", -#- "ide-mod" => "ide-mod", -#- "ide-probe" => "ide-probe", -#- "ide-probe-mod" => "ide-probe-mod", -}], -[ 'disk', { -if_(arch() =~ /^sparc/, - "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ? -), -if_(arch() !~ /alpha/ && arch() !~ /sparc/, - "DAC960" => "Mylex DAC960", - "dpt_i2o" => "Distributed Tech SmartCache/Raid I-V Controller", - "megaraid" => "AMI MegaRAID", - "aacraid" => "AACxxx Raid Controller", - "cciss" => "Compaq Smart Array 5300 Controller", - "cpqarray" => "Compaq Smart-2/P RAID Controller", - "gdth" => "ICP Disk Array Controller", - "i2o_block" => "Intel Integrated RAID", - "ips" => "IBM ServeRAID controller", - "eata" => "EATA SCSI PM2x24/PM3224", - "eata_pio" => "EATA PIO Adapters", - "eata_dma" => "EATA DMA Adapters", - "ppa" => "Iomega PPA3 (parallel port Zip)", - "imm" => "Iomega Zip (new driver, for post 31/Aug/1998 drives)", -), -}], -[ 'disk_raw', { -#- "ide-disk" => "IDE disk", -}], -[ 'cdrom', { -if_(arch() !~ /alpha/ && arch() !~ /sparc/, -#******(missing-2.4) "sbpcd" => "SoundBlaster/Panasonic", -#******(missing-2.4) "aztcd" => "Aztech CD", -#******(missing-2.4) "gscd" => "Goldstar R420", -#******(missing-2.4) "isp16" => "ISP16/MAD16/Mozart", -#******(missing-2.4) "mcd" => "Mitsumi", #- removed for space -#******(missing-2.4) "mcdx" => "Mitsumi (alternate)", -#******(missing-2.4) "optcd" => "Optics Storage 8000", -#******(missing-2.4) "cm206" => "Phillips CM206/CM260", -#******(missing-2.4) "sjcd" => "Sanyo", -#******(missing-2.4) "cdu31a" => "Sony CDU-31A", -#******(missing-2.4) "sonycd535" => "Sony CDU-5xx", -), -}], -[ 'cdrom_raw', { - "isofs" => "iso9660", - "ide-cd" => "ide-cd", - "sr_mod" => "SCSI CDROM support", - "cdrom" => "cdrom", -}], -[ 'sound', { -if_(arch() =~ /ppc/, - "dmasound_awacs" => "Amiga or PowerMac DMA sound", -), -if_(arch() !~ /^sparc/, - "cmpci" => "C-Media Electronics CMI8338A CMI8338B CMI8738", - "cs46xx" => "Cirrus Logic CrystalClear SoundFusion (cs46xx)", - "cs4281" => "Cirrus Logic|Crystal CS4281 PCI Audio", - "es1370" => "Ensoniq ES1370 [AudioPCI]", - "es1371" => "Ensoniq ES1371 [AudioPCI-97]", - "esssolo1" => "ESS Technology ES1969 Solo-1 Audiodrive", - "i810_audio" => "i810 integrated sound card", - "maestro" => "ESS Maestro 1/2", - "maestro3" => "ESS Maestro-3", - "nm256" => "Neomagic MagicMedia 256AV", - "pas16" => "Pro Audio Spectrum/Studio 16", - "trident" => "M5451 PCI South Bridge Audio", - "via82cxxx" => "VIA VT82C686_5", - "via82cxxx_audio" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]", - "sonicvibes" => "S3 SonicVibes", - "snd-card-ice1712" => "IC Ensemble Inc|ICE1712 [Envy24]", - "emu10k1" => "Creative Labs|SB Live! (audio)", - "ymfpci" => "Yamaha YMF-740, DS-1", -# "au8820" => "Aureal Semiconductor|Vortex 1", -# "au8830" => "Aureal Semiconductor|Vortex 2", - "snd-card-cmipci" => "CMI", - "snd-card-cs461x" => "Cirrus Logic|CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]", - "snd-card-ens1371" => "Ensoniq/Creative Labs ES1371", - "snd-card-es1938" => "ESS Technology|ES1969 Solo-1 Audiodrive", - "snd-card-fm801" => "Fortemedia, Inc|Xwave QS3000A [FM801]<>Fortemedia, Inc|FM801 PCI Audio", - "snd-card-intel8x0" => "Intel Corporation|82440MX AC'97 Audio Controller<>Intel Corporation", - "snd-card-rme96" => "Xilinx, Inc.|RME Digi96<>Xilinx, Inc.", - "snd-card-trident" => "Silicon Integrated Systems [SiS]|7018 PCI Audio", - "snd-card-via686a" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]", - "snd-card-ymfpci" => "Yamaha Corporation|YMF-740", -), -}], -[ 'pcmcia', { -if_(arch() !~ /^sparc/, - "ide_cs" => "ide_cs", - "fmvj18x_cs" => "fmvj18x_cs", - "fdomain_cs" => "fdomain_cs", - "netwave_cs" => "netwave_cs", - "serial_cs" => "serial_cs", - "wavelan_cs" => "wavelan_cs", - "pcnet_cs" => "pcnet_cs", - "aha152x_cs" => "aha152x_cs", - "xirc2ps_cs" => "xirc2ps_cs", - "3c574_cs" => "3c574_cs", - "qlogic_cs" => "qlogic_cs", - "nmclan_cs" => "nmclan_cs", - "ibmtr_cs" => "ibmtr_cs", -# "dummy_cs" => "dummy_cs", -# "memory_cs" => "memory_cs", - "ftl_cs" => "ftl_cs", - "smc91c92_cs" => "smc91c92_cs", - "3c589_cs" => "3c589_cs", -#******(missing-2.4) "parport_cs" => "parport_cs", - "3c575_cb" => "3c575_cb", - "apa1480_cb" => "apa1480_cb", - "cb_enabler" => "cb_enabler", - "epic_cb" => "epic_cb", - "iflash2+_mtd" => "iflash2+_mtd", - "iflash2_mtd" => "iflash2_mtd", -# "memory_cb" => "memory_cb", - "serial_cb" => "serial_cb", -# "sram_mtd" => "sram_mtd", - "tulip_cb" => "tulip_cb", - -), -}], -[ 'pcmcia_everywhere', { -if_(arch() !~ /^sparc/, - "pcmcia_core" => "PCMCIA core support", - "tcic" => "PCMCIA tcic controller", - "ds" => "PCMCIA card support", - "i82365" => "PCMCIA i82365 controller", -), -}], -[ 'paride', { -if_(arch() !~ /^sparc/, - "aten" => "ATEN EH-100", - "bpck" => "Microsolutions backpack", - "comm" => "DataStor (older type) commuter adapter", - "dstr" => "DataStor EP-2000", - "epat" => "Shuttle EPAT", - "epia" => "Shuttle EPIA", - "fit2" => "Fidelity Intl. (older type)", - "fit3" => "Fidelity Intl. TD-3000", - "frpw" => "Freecom Power", - "friq" => "Freecom IQ (ASIC-2)", - "kbic" => "KingByte KBIC-951A and KBIC-971A", - "ktti" => "KT Tech. PHd", - "on20" => "OnSpec 90c20", - "on26" => "OnSpec 90c26", - "pd" => "Parallel port IDE disks", - "pcd" => "Parallel port CD-ROM", - "pf" => "Parallel port ATAPI disk", - "paride" => "Main parallel port module", -), -}], -[ 'raid', { - "linear" => "linear", - "raid0" => "raid0", - "raid1" => "raid1", - "raid5" => "raid5", -}], -[ 'mouse', { -if_(arch() !~ /^sparc/, - "busmouse" => "busmouse", - "msbusmouse" => "msbusmouse", - "serial" => "serial", - "qpmouse" => "qpmouse", - "atixlmouse" => "atixlmouse", -), -}], -[ 'usb', { - "usbcore" => "usbcore", - "usb-uhci" => "USB Controller (uhci)", - "usb-ohci" => "USB Controller (ohci)", - "usb-ohci-hcd" => "USB (ohci-hcd)", -}], -[ 'fs', { - "smbfs" => "Windows SMB", - "fat" => "fat", - "msdos" => "msdos", - "romfs" => "romfs", - "vfat" => "vfat", -}], -[ 'other', { - "agpgart" => "agpgart", - "buz" => "Zoran Corporation|ZR36057PQC Video cutting chipset", - "defxx" => "DEC|DEFPA", - "i810_rng" => "i810_rng", - "ide-floppy" => "ide-floppy", - "ide-scsi" => "ide-scsi", - "ide-tape" => "ide-tape", - "loop" => "Loopback device", - "lp" => "Parallel Printer", - "nbd" => "nbd", - "rrunner" => "Essential Communications|Roadrunner serial HIPPI", - "sg" => "sg", - "st" => "st", -}], -); - -my %type_aliases = ( - scsi => 'disk', -); - -my @skip_big_modules_on_stage1 = ( -# dgrs e1000 -qw( -olympic -sk98lin acenic -3c90x -aironet4500_card com20020-pci hamachi starfire winbond-840 - -dc395x_trm -BusLogic seagate fdomain g_NCR5380 tmscsim -) -); #******(missing-2.4) dpt_i2o aztcd gscd isp16 mcd mcdx optcd cm206 sjcd cdu31a - -my @skip_modules_on_stage1 = ( - qw(sktr tmspci ibmtr abyss), # alt token ring - qw(old_tulip rtl8139), # doesn't exist in 2.4 - if_(arch() =~ /alpha|ppc/, qw(sb1000)), - "apa1480_cb", - "imm", - "ppa", - "parport", - "parport_pc", - "plip", - if_(arch() !~ /ia64/, qw(qla1280)), - qw(3w-xxxx pci2220i qla2x00 i2o_block), - qw(gdth eata eata_pio eata_dma ips), - qw(ac3200 at1700 atp ni5010 ni52 ni65), #- unused from Jeff - "u14-34f", #- duplicate from ultrastor.o -); - - -my @drivers_fields = qw(text type); -%drivers = (); - -foreach (@drivers_by_category) { - my ($type, $l) = @$_; - foreach (keys %$l) { $drivers{$_} = [ $l->{$_}, $type ]; } -} -while (my ($k, $v) = each %drivers) { - my %l; @l{@drivers_fields} = @$v; - $drivers{$k} = \%l; -} - -sub module_of_type__4update_kernel { - my ($type) = @_; - $type = join "|", map { $_, $_ . "_raw" } split ' ', $type; - my %skip; - @skip{@skip_modules_on_stage1} = (); - @skip{@skip_big_modules_on_stage1} = () if $type !~ /big/; - "big" =~ /^($type)$/ ? @skip_big_modules_on_stage1 : (), - grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers; -} -sub module_of_type { - my ($type) = @_; - my $alias = $type_aliases{$type} || $type; - grep { $drivers{$_}{type} =~ /^(($type)|$alias)$/ } keys %drivers; -} -sub module2text { $drivers{$_[0]}{text} or log::l("trying to get text of unknown module $_[0]"), return $_[0] } - -sub get_alias { - my ($alias) = @_; - $conf{$alias}{alias}; -} -sub get_options { - my ($name) = @_; - $conf{$name}{options}; -} - -sub set_options { - my ($name, $new_option) = @_; - $conf{$name}{options} = $new_option; -} - -sub add_alias { - my ($alias, $name) = @_; - $name =~ /ignore/ and return; - /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $name and return $_ foreach keys %conf; - $alias .= $scsi++ || '' if $alias eq 'scsi_hostadapter'; - log::l("adding alias $alias to $name"); - $conf{$alias}{alias} ||= $name; - if ($name =~ /^snd-card-/) { - $conf{$name}{"post-install"} = "modprobe snd-pcm-oss"; - } - $alias; -} - -sub remove_alias($) { - my ($name) = @_; - foreach (keys %conf) { - $conf{$_}{alias} && $conf{$_}{alias} eq $name or next; - delete $conf{$_}{alias}; - return 1; - } - 0; -} - -sub when_load { - my ($name, $type, @options) = @_; - if ($type =~ /\bscsi\b/ || $type eq $type_aliases{scsi}) { - add_alias('scsi_hostadapter', $name), eval { load('sd_mod') }; - } - if ($type eq 'sound') { - #- mainly for ppc - add_alias('sound-slot-0', $name); - } - if ($name =~ /^snd-card-/) { - load('snd-pcm-oss', 'prereq'); - } - $conf{$name}{options} = join " ", @options if @options; -} - -sub load { - my ($name, $type, @options) = @_; - - my @netdev = detect_devices::getNet() if $type eq 'net'; - - if ($::testing) { - log::l("i try to install $name module (@options)"); - } elsif ($::isStandalone || $::live) { - run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $name, @options) - or die "insmod'ing module $name failed"; - } else { - $conf{$name}{loaded} and return; - - eval { load($_, 'prereq') } foreach @{$deps{$name}}; - load_raw([ $name, @options ]); - } - sleep 2 if $name =~ /usb-storage|mousedev/; - - if ($type eq 'net') { - add_alias($_, $name) foreach difference2([ detect_devices::getNet() ], \@netdev); - } - when_load($name, $type, @options); -} -sub load_multi { - my $f; $f = sub { map { $f->(@{$deps{$_}}), $_ } @_ }; - my %l; my @l = - grep { !$conf{$_}{loaded} } - grep { my $o = $l{$_}; $l{$_} = 1; !$o } - $f->(@_); - - if ($::testing) { - log::l("i would install modules @l"); - } elsif ($::isStandalone || $::live) { - foreach (@l) { run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $_) } - } else { - load_raw(map { [ $_ ] } @l); - } -} - -sub unload { - my ($m) = @_; - if ($::testing) { - log::l("rmmod $m"); - } else { - if (run_program::run("rmmod", $m)) { - delete $conf{$m}{loaded}; - } - } -} - -sub load_raw { - my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_; - my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version(); - if (!-e $cz) { - unlink $_ foreach glob_("/lib/modules*.cz*"); - require install_any; - install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!"; - } - eval { - require packdrake; - my $packer = new packdrake($cz, quiet => 1); - $packer->extract_archive("/tmp", map { "$_->[0].o" } @l); - }; - my @failed = grep { - my $m = "/tmp/$_->[0].o"; - if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', '-f', $m, @{$_->[1]})) { - unlink $m; - $conf{$_->[0]}{loaded} = 1; - ''; - } else { - log::l("missing module $_->[0]") unless -e $m; - -e $m; - } - } @l; - - die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed; - - foreach (@l) { - if ($_->[0] eq "parport_pc") { - #- this is a hack to make plip go - foreach (@{$_->[1]}) { - /^irq=(\d+)/ and eval { output "/proc/parport/0/irq", $1 }; - } - } elsif ($_->[0] =~ /usb-[uo]hci/) { - add_alias('usb-interface', $_->[0]); - eval { - require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs'); - #- ensure keyboard is working, the kernel must do the job the BIOS was doing - sleep 2; - load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards(); - } - } - } -} - -sub read_already_loaded() { - foreach (cat_("/proc/modules")) { - my ($name) = split; - $conf{$name}{loaded} = 1; - when_load($name, $drivers{$name}{type}); - } -} - -sub load_deps($) { - my ($file) = @_; - - local *F; open F, $file or log::l("error opening $file: $!"), return 0; - local $_; - while (<F>) { - my ($f, $deps) = split ':'; - push @{$deps{$f}}, split ' ', $deps; - } -} - -sub read_conf($;$) { - my ($file, $scsi) = @_; - my %c; - - foreach (cat_($file)) { - do { - $c{$2}{$1} = $3; - $$scsi = max($$scsi, $1 || 0) if /^\s*alias\s+scsi_hostadapter(\d*)/ && $scsi; #- space added to make perl2fcalls happy! - } if /^\s*(\S+)\s+(\S+)\s+(.*?)\s*$/; - } - #- cheating here: not handling aliases of aliases - while (my ($k, $v) = each %c) { - if (my $a = $v->{alias}) { - local $c{$a}{alias}; - add2hash($c{$a}, $v); - } - } - \%c; -} - -sub mergein_conf { - my ($file) = @_; -#- add2hash(\%conf, read_conf($file, \$scsi)); - my $modconfref = read_conf ($file, \$scsi); - while (my ($key, $value) = each %$modconfref) { - $conf{$key}{alias} = $value->{alias} unless exists $conf{$key}{alias}; - } -} - -sub write_conf { - my ($prefix) = @_; - - my $file = "$prefix/etc/modules.conf"; - rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed - - #- remove the post-install supermount stuff. We now do it in /etc/modules - #- Substitute new aliases in modules.conf (if config has changed) - substInFile { $_ = '' if /^post-install supermount/ } $file; - substInFile { - my ($type,$alias,$module) = split /\s+/, $_; - if ($type ne "loaded" && - $conf{$alias}{alias} && - $conf{$alias}{alias} !~ /$module/) { - $_ = "$type $alias $conf{$alias}{alias} \n"; - } - } $file; - - my $written = read_conf($file); - - local *F; - open F, ">> $file" or die("cannot write module config file $file: $!\n"); - while (my ($mod, $h) = each %conf) { - while (my ($type, $v2) = each %$h) { - print F "$type $mod $v2\n" if $v2 && $type ne "loaded" && !$written->{$mod}{$type}; - } - } - my @l = map { "scsi_hostadapter$_" } '', 1..$scsi-1 if $scsi; - push @l, 'ide-floppy' if detect_devices::ide_zips(); - push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall(); - my $l = join '|', @l; - log::l("to put in modules ", join(", ", @l)); - - substInFile { - $_ = '' if /$l/; - $_ = join '', map { "$_\n" } @l if eof; - } "$prefix/etc/modules"; -} - -sub read_stage1_conf { - mergein_conf($_[0]); - - if (arch() =~ /sparc/) { - } elsif (arch() =~ /ppc/) { - $conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start"; - } else { - $conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start"; - } -} - -sub load_thiskind { - my ($type, $f) = @_; - - #- get_that_type returns the PCMCIA cards. It doesn't know they are already - #- loaded, so: - read_already_loaded(); - - my @try_modules = ( - if_($type =~ /scsi/, - if_(arch() !~ /ppc/, 'imm', 'ppa'), - if_(detect_devices::usbZips(), 'usb-storage'), - ), - if_(arch() =~ /ppc/, - if_($type =~ /scsi/, 'mesh', 'mac53c94'), - if_($type =~ /net/, 'bmac', 'gmac', 'mace'), - if_($type =~ /sound/, 'dmasound_awacs'), - ), - ); - grep { - $f->($_->{description}, $_->{driver}) if $f; - eval { load($_->{driver}, $type, $_->{options}) }; - $_->{error} = $@; - - !($@ && $_->{try}); - } get_that_type($type), - map {; { driver => $_, description => $_, try => 1 } } @try_modules; -} - -sub get_that_type { - my ($type) = @_; - - grep { - if ($type eq 'isdn') { - my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/; - if ($b) { - $_->{driver} = $1; - $_->{options} = $2; - $_->{firmware} = $3; - $_->{driver} eq "hisax" and $_->{options} .= " id=HiSax"; - } - $b; - } else { - my $l = $drivers{$_->{driver}}; - ($_->{type} =~ /$type/ || $l && $l->{type} =~ /$type/) && detect_devices::check($_); - } - } detect_devices::probeall(''); -} - -sub load_ide { - if (1) { #- add it back to support Ultra66 on ide modules. - eval { load("ide-cd"); } - } else { - eval { - load("ide-mod", 'prereq', 'options="' . detect_devices::hasUltra66() . '"'); - delete $conf{"ide-mod"}{options}; - load_multi(qw(ide-probe ide-probe-mod ide-disk ide-cd)); - } - } -} - -sub configure_pcmcia { - my ($pcic) = @_; - - #- try to setup pcmcia if cardmgr is not running. - my $running if 0; - return if $running; - $running = 1; - - log::l("i try to configure pcmcia services"); - - symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia"; - - eval { - load("pcmcia_core"); - load($pcic); - load("ds"); - }; - - #- run cardmgr in foreground while it is configuring the card. - run_program::run("cardmgr-" . c::kernel_version(), "-f", "-m" ,"/modules"); - sleep(3); - - #- make sure to be aware of loaded module by cardmgr. - read_already_loaded(); -} - -sub get_pcmcia_devices { - my (@devs, $desc); - - foreach (cat_("/var/run/stab")) { - if (/^Socket\s+\d+:\s+(.*)/) { - $desc = $1; - } else { - my (undef, $type, $module, undef, $device) = split; - push @devs, { description => $desc, driver => $module, type => $type, device => $device }; - } - } - @devs; -} - -sub write_pcmcia { - my ($prefix, $pcmcia) = @_; - - #- should be set after installing the package above otherwise the file will be renamed. - setVarsInSh("$prefix/etc/sysconfig/pcmcia", { - PCMCIA => bool2yesno($pcmcia), - PCIC => $pcmcia, - PCIC_OPTS => "", - CORE_OPTS => "", - }); -} - - - -1; |