1 files changed, 0 insertions, 0 deletions
diff --git a/perl-install/install/pixmaps/langs/lang-chr.png b/perl-install/install/pixmaps/langs/lang-chr.png
new file mode 100644
index 000000000..b93621609
--- /dev/null
+++ b/perl-install/install/pixmaps/langs/lang-chr.png
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
index 3c4ac84d9..19db78127 100644
--- a/perl-install/network/netconnect.pm
+++ b/perl-install/network/netconnect.pm
@@ -1030,7 +1030,7 @@ packet size disable the scheme. You may also set this parameter to auto, fixed
 or off.")
                              },
                              { label => N("Fragmentation"), val => \$ethntf->{WIRELESS_FRAG}, advanced => 1 },
-                             { label => N("Iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
+                             { label => N("iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
                                help => N("Here, one can configure some extra wireless parameters such as:
 ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).
 
@@ -1038,8 +1038,8 @@ See iwconfig(8) man page for further information."),
                              },
                              { label =>
                                #-PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-                               N("Iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
-                               help => N("Iwspy is used to set a list of addresses in a wireless network
+                               N("iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
+                               help => N("iwspy is used to set a list of addresses in a wireless network
 interface and to read back quality of link information for each of those.
 
 This information is the same as the one available in /proc/net/wireless :
@@ -1048,11 +1048,11 @@ quality of the link, signal strength and noise level.
 See iwpspy(8) man page for further information."),
  },
                              if_(!$need_rt2x00_iwpriv,
-                                 { label => N("Iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
-                                   help => N("Iwpriv enable to set up optionals (private) parameters of a wireless network
+                                 { label => N("iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
+                                   help => N("iwpriv enable to set up optionals (private) parameters of a wireless network
 interface.
 
-Iwpriv deals with parameters and setting specific to each driver (as opposed to
+iwpriv deals with parameters and setting specific to each driver (as opposed to
 iwconfig which deals with generic ones).
 
 In theory, the documentation of each device driver should indicate how to use
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 3358ef262..9a5ffd6b9 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -9242,7 +9242,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9257,13 +9257,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9274,16 +9274,16 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless network\n"
+"iwpriv enable to set up optionals (private) parameters of a wireless network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
+"iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
 "In theory, the documentation of each device driver should indicate how to use\n"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index ebe591f84..b1cd9b08c 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -10837,8 +10837,8 @@ msgstr "Fragmentasie"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig program se ekstra argumente"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig program se ekstra argumente"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10857,13 +10857,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy program se ekstra argumente"
+msgid "iwspy command extra arguments"
+msgstr "iwspy program se ekstra argumente"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10871,7 +10871,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+"iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 "\n"
 "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
@@ -10881,17 +10881,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv program se ekstra argumente"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv program se ekstra argumente"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10901,10 +10901,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv stel u in staat om privaatheidsverstellings aan\n"
+"iwpriv stel u in staat om privaatheidsverstellings aan\n"
 "die draadlose netwerkkoppelvlak aan te bring.\n"
 "\n"
-"Iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
+"iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
 "iwconfig wat generiese verstellings doen)\n"
 "\n"
 "In teorie, behoort u al die nodige inligting vanaf die drywer\n"
@@ -28254,7 +28254,7 @@ msgstr "Installasie het gefaal!"
 #~ "Bv. ``io=0x300 irq-7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
@@ -28263,7 +28263,7 @@ msgstr "Installasie het gefaal!"
 #~ "\n"
 #~ "See iwpspy(8) man page for further information."
 #~ msgstr ""
-#~ "Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+#~ "iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 #~ "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 #~ "\n"
 #~ "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
diff --git a/perl-install/share/po/am.po b/perl-install/share/po/am.po
index 4af65be87..c1a964714 100644
--- a/perl-install/share/po/am.po
+++ b/perl-install/share/po/am.po
@@ -9616,7 +9616,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9632,13 +9632,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9649,17 +9649,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 3038b9586..f4373ba53 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -10995,8 +10995,8 @@ msgstr "مستوى التّجزّء"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "المُعطيات الإضافية لأمر Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "المُعطيات الإضافية لأمر iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11016,13 +11016,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11040,17 +11040,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11060,10 +11060,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"يمكنك Iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
+"يمكنك iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
 "اللّاسلكيّة.\n"
 "\n"
-"يتعامل Iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
+"يتعامل iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
 "iwconfig والذي يتعامل مع الأشياء العامّة).\n"
 "\n"
 "نظريّاً، يجب أن يُبيّن مواثقة كلّ مشغّل جهاز كيفيّة استخدام\n"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 08119bcc6..58c1a2ef6 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -10965,8 +10965,8 @@ msgstr "Fraqmentasiya"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig əmri əlavə arqumentləri"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10981,13 +10981,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy əmri əlavə arqumentləri"
+msgid "iwspy command extra arguments"
+msgstr "iwspy əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10998,17 +10998,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv əmri əlavə arqumentləri"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index 475a821d0..bcc20e386 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -9720,7 +9720,7 @@ msgstr "Аўтэнтыфікацыя"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9736,13 +9736,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9753,17 +9753,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index b6e475851..62e84b53a 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po