summaryrefslogtreecommitdiffstats
path: root/perl-install/help.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/help.pm')
-rw-r--r--perl-install/help.pm903
1 files changed, 0 insertions, 903 deletions
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index 283f4464c..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,903 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated
-# from the manuals !!!
-# Write a mail to <documentation@mandrakesoft.com> if
-# you want it changed.
-
-%steps = (
-empty => '',
-
-addUser =>
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log onto the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as \"root\"' one
-from a security point of view, but that is no reason to neglect it: after
-all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s =>
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installations. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd =>
-__("The Mandrake Linux installation is spread out over several CD-ROMs. DrakX
-knows if a selected package is located on another CD-ROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages =>
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from a CD-ROM, you will first
-be asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups;
-
- * \"Development\": if your machine is to be used for programming, choose
-the desired group(s);
-
- * \"Server\": if your machine is intended to be a server, you will be able
-to select which of the most common services you wish to install on your
-machine;
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group. If you deselect all groups when performing a regular
-installation (by opposition to an upgrade), a dialog will pop up proposing
-different options for a minimal installation:
-
- * \"With X\": install the fewer packages possible to have a working
-graphical desktop;
-
- * \"With basic documentation\": installs the base system plus basic
-utilities and their documentation. This installation is suitable for
-setting up a server;
-
- * \"Truly minimal install\": will install the strict minimum necessary to
-get a working Linux system, in command line only. This installation is
-about 65Mb large.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Upgrade\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree =>
-__("Finally, depending on whether or not you selected individual packages, you
-will be presented a tree containing all packages classified by groups and
-subgroups. While browsing the tree, you can select entire groups,
-subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. An estimate of the time it will take to
-install everything is displayed on the screen, to help you gauge if there
-is sufficient time to enjoy a cup of coffee.
-
-!! If a server package has been selected, either intentionally or because
-it was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disk icon at the bottom of the list allows to load the
-package list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork =>
-__("You are now proposed to set up your Internet/network connection. If you
-wish to connect your computer to the Internet or to a local network, click
-\"OK\". The autodetection of network devices and modem will be launched. If
-this detection fails, uncheck the \"Use auto detection\" box next time. You
-may also choose not to configure the network, or do it later; in that case,
-simply click the \"Cancel\" button.
-
-Available connections are: traditional modem, ISDN modem, ADSL connection,
-cable modem, and finally a simple LAN connection (Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the ``User Guide'' chapter about Internet connections for
-details about the configuration, or simply wait until your system is
-installed and use the program described there to configure your connection.
-
-If you wish to configure the network later after installation, or if you
-are finished configuring your network connection, click \"Cancel\"."),
-
-configureServices =>
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-!! At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services which you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need.
-!!"),
-
-configureTimezoneGMT =>
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected. It is however possible
-to deactivate this by deselecting \"Hardware clock set to GMT\" so that the
-hardware clock is the same as the system clock. This is useful when the
-machine is hosting another operating system like Windows.
-
-The \"Automatic time synchronization\" option will automatically regulate
-the clock by connecting to a remote time server on the Internet. In the
-list that is presented, choose a server located near you. Of course you
-must have a working Internet connection for this feature to work. It will
-actually install on your machine a time server which can be optionally used
-by other machines on your local network."),
-
-configureX =>
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphical environments (KDE, GNOME, AfterStep,
-WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible, depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" installation, you will enter the X
-configuration wizard. See the corresponding section of the manual for more
-information about this wizard.
-
-If you can see the message during the test, and answer \"Yes\", then DrakX
-will proceed to the next step. If you cannot see the message, it simply
-means that the configuration was wrong and the test will automatically end
-after 10 seconds, restoring the screen."),
-
-configureXmain =>
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server, choose \"FBDev\". This is a failsafe option which works with any
-modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm =>
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk =>
-__("The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by
-booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<
-at the prompt. But in case your computer cannot boot from the CD-ROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the bootloader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager), to allow you
-to start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks =>
-__("At this point, you need to choose where you want to install the Mandrake
-Linux operating system on your hard drive. If your hard drive is empty or
-if an existing operating system is using all the available space, you will
-need to partition it. Basically, partitioning a hard drive consists of
-logically dividing it to create space to install your new Mandrake Linux
-system.
-
-Because the partitioning process' effects are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the installation in Expert mode, you will enter
-DiskDrake, the Mandrake Linux partitioning tool, which allows you to
-fine-tune your partitions. See the DiskDrake section in the ``User Guide''.
-From the installation interface, you can use the wizards as described here
-by clicking the dialog's \"Wizard\" button.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further;
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option;
-
- * \"Use the free space on the Windows; partition\": if MicrosoftWindows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do so, you can delete your
-MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert
-mode'' solutions) or resize your MicrosoftWindows partition. Resizing can
-be performed without the loss of any data, provided you previously
-defragment the Windows partition. Backing up your data won't hurt either..
-This solution is recommended if you want to use both Mandrake Linux and
-MicrosoftWindows on the same computer.
-
- Before choosing this option, please understand that after this procedure,
-the size of your MicrosoftWindows partition will be smaller than at the
-present time. You will have less free space under MicrosoftWindows to store
-your data or to install new software;
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after you confirm;
-
- !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost;
-
- !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful it is a powerful but dangerous choice. You can
-very easily lose all your data. Hence, do not choose this unless you know
-what you are doing."),
-
-exitInstall =>
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
- Note that two different options are available after clicking the button:
-
- * \"Replay\". This is a partially automated installation as the
-partitioning step (and only this one) remains interactive;
-
- * \"Automated\". Fully automated installation: the hard disk is completely
-rewritten, all data is lost.
-
- This feature is very handy when installing a great number of similar
-machines. See the Auto install section on our web site;
-
- * \"Save packages selection\"(*): saves the package selection as done
-previously. Then, when doing another installation, insert the floppy inside
-the drive and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions =>
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a filesystem).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of it.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disk."),
-
-installPackages =>
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-installUpdates =>
-__("At the time you are installing Mandrake Linux, it is likely that some
-packages have been updated since the initial release. Some bugs may have
-been fixed, and security issues solved. To allow you to benefit from these
-updates, you are now proposed to download them from the Internet. Choose
-\"Yes\" if you have a working Internet connection, or \"No\" if you prefer
-to install updated packages later.
-
-Choosing \"Yes\" displays a list of places from which updates can be
-retrieved. Choose the one nearest you. Then a package-selection tree
-appears: review the selection, and press \"Install\" to retrieve and
-install the selected package(s), or \"Cancel\" to abort."),
-
-license =>
-__("Before continuing, you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click on the
-\"Accept\" button."),
-
-miscellaneous =>
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expense of
-easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''
-to get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake =>
-__("At this point, you need to choose which partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have already been
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise, hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on ``hda'' for the first IDE drive,
-``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive;
-
- * \"Auto allocate\": this option enables to automatically create \"Ext2\"
-and swap partitions in free space of your hard drive;
-
- * \"More\": gives access to additional features:
-
- * \"Save partition table\": saves the partition table to a floppy. Useful
-for later partition-table recovery if necessary. It is strongly recommended
-to perform this step;
-
- * \"Restore partition table\": allows to restore a previously saved
-partition table from floppy disk;
-
- * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail;
-
- * \"Reload partition table\": discards all changes and loads your initial
-partition table;
-
- * \"Removable media automounting\": unchecking this option will force users
-to manually mount and unmount removable medias such as floppies and
-CD-ROMs.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning;
-
- * \"Undo\": use this option to cancel your changes;
-
- * \"Toggle to normal/expert mode\": allows additional actions on partitions
-(type, options, format) and gives more information;
-
- * \"Done\": when you are finished partitioning your hard drive, this will
-save your changes back to disk.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-To get information about the different filesystem types available, please
-read the ext2fs chapter from the ``Reference Manual''.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-``bootstrap'' partition of at least 1MB, which will be used by the yaboot
-bootloader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose =>
-__("More than one Microsoft partition has been detected on your hard drive.
-Please choose the one you want to resize in order to install your new
-Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait =>
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass =>
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You can
-also choose to do a new install or an upgrade of an existing Mandrake Linux
-system:
-
- * \"Install\": completely wipes out the old system. In fact, depending on
-what currently holds your machine, you will be able to keep some old (Linux
-or other) partitions unchanged;
-
- * \"Upgrade\": this installation class allows to simply update the packages
-currently installed on your Mandrake Linux system. It keeps the current
-partitions of your hard drives as well as user configurations. All other
-configuration steps remain available with respect to plain installation;
-
- * \"Upgrade Packages Only\": this brand new class allows to upgrade an
-existing Mandrake Linux system while keeping all system configurations
-unchanged. Adding new packages to the current installation is also
-possible.
-
-Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"
-release.
-
-Depending on your knowledge of GNU/Linux, select one of the following
-choices:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions;
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly-customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux, so do not
-choose this unless you know what you are doing."),
-
-selectKeyboard =>
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you won't even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage =>
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the box corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales, click the \"OK\" button to continue."),
-
-selectMouse =>
-__("DrakX generally detects the number of buttons your mouse has. If not, it
-assumes you have a two-button mouse and will set it up for third-button
-emulation. DrakX will automatically know whether it is a PS/2, serial or
-USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the provided list.
-
-If you choose a mouse other than the default, a test screen will be
-displayed. Use the buttons and wheel to verify that the settings are
-correct. If the mouse is not working well, press the space bar or [Return]
-to \"Cancel\" and choose again."),
-
-selectSerialPort =>
-__("Please select the correct port. For example, the \"COM1\" port under
-Windows is named \"ttyS0\" under GNU/Linux."),
-
-setRootPassword =>
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess DrakX will tell you if it is too easy. As you can see, you can choose
-not to enter a password, but we strongly advise you against this if only
-for one reason: do not think that because you booted GNU/Linux that your
-other operating systems are safe from mistakes. Since \"root\" can overcome
-all limitations and unintentionally erase all data on partitions by
-carelessly accessing the partitions themselves, it is important for it to
-be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-``incorrect'' password will have to be used the first time you connect.
-
-In Expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses the LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader =>
-__("LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally
-automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if a Windows boot sector is found, it will replace it with a grub/LILO
-boot sector. Hence, you will be able to load either GNU/Linux or another
-OS;
-
- * if a grub or LILO boot sector is found, it will replace it with a new
-one.
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Bootloader to use\": you have three choices:
-
- * \"GRUB\": if you prefer grub (text menu).
-
- * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
- * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose in the bootloader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a bootloader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also, be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-After you have configured the general bootloader parameters, the list of
-boot options which will be available at boot time will be displayed.
-
-If there is another operating system installed on your machine, it will
-automatically be added to the boot menu. Here, you can choose to fine-tune
-the existing options. Select an entry and click \"Modify\" to modify or
-remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next
-installation step."),
-
-setupBootloaderAddEntry =>
-__("LILO (the LInux LOader) and grub are bootloaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner =>
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler =>
-__("Here, we select a printing system for your computer. Other OSs may offer
-you one, but Mandrake Linux offers three.
-
- * \"pdq\" which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have networked printers. It will handle only
-very simple network cases and is somewhat slow for networks. Pick \"pdq\"
-if this is your maiden voyage to GNU/Linux. You can change your choices
-after installation by running PrinterDrake from the Mandrake Control Center
-and clicking the expert button.
-
- * \"CUPS\"``Common Unix Printing System'', is excellent at printing to your
-local printer and also halfway-around the planet. It is simple and can act
-as a server or a client for the ancient \"lpd\" printing system. Hence, it
-is compatible with the systems that went before. It can do many tricks, but
-the basic setup is almost as easy as \"pdq\". If you need this to emulate
-an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\"``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports the IPX protocol,
-and it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI =>
-__("DrakX now detects any IDE device present in your computer. It will also
-scan for one or more PCI SCSI card(s) on your system. If a SCSI card is
-found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection does not always detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure, you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options which the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options which need to be passed, you
-will need to provide options to the driver manually. Please review the
-``User Guide'' (chapter 3, in the ``Collecting Information on Your
-Hardware'' section) for hints on retrieving the parameters required from
-hardware documentation, from the manufacturer's web site (if you have
-Internet access) or from MicrosoftWindows (if you used this hardware with
-Windows on your system)."),
-
-setupYabootAddEntry =>
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OSs, the entry consists only of a label and the \"root\"
-partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option;
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension;
-
- * Root: the \"root\" device or ``/'' for your Linux installation;
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
- video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
- video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation;
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used;
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes ``live''.
-Here, you can override this option;
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in ``novideo'' mode, with
-native frame buffer support;
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a ``*'', if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral =>
-__("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful to
-choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message displayed before the boot prompt;
-
- * Boot Device: indicates where you want to place the information required
-to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
-to hold this information;
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux;
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected;
-
- * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
-at the first boot prompt;
-
- * Enable OF Boot?: checking this option allows you to choose ``N'' for Open
-Firmware at the first boot prompt;
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary =>
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary;
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary;
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in;
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard;
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time;
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time;
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated with it."),
-
-takeOverHdChoose =>
-__("Choose the hard drive you want to erase in order to install your new
-Mandrake Linux partition. Be careful, all data present on it will be lost
-and will not be recoverable!"),
-
-takeOverHdConfirm =>
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);