drakx - Mageia Installer and base platform for many utilities

diff options

Diffstat (limited to 'perl-install/crypto.pm')

0 files changed, 0 insertions, 0 deletions

package help; use common qw(:common); %steps = ( selectLanguage => __("Choose preferred language for install and system usage."), selectKeyboard => __("Choose the layout corresponding to your keyboard from the list above"), selectInstallClass => [ __("Choose \"Install\" if there are no previous versions of GNU/Linux installed, or if you wish to use multiple distributions or versions. Choose \"Rescue\" if you wish to rescue a previous version of Mandrake Linux: %s or %s. Select: - Recommended: If you have never installed GNU/Linux before, choose this. - Customized: If you are familiar enough with GNU/Linux, you may then choose the primary usage for your machine. See below for details. - Expert: This supposes that you are fluent with GNU/Linux and want to perform a highly customized installation. As for a \"Customized\" installation class, you will be able to select the usage for your system. But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE DOING! "), '5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold 2000', '7.0 (Air)' ], selectInstallClassCorpo => __("Select: - Customized: If you are familiar enough with GNU/Linux, you may then choose the primary usage for your machine. See below for details. - Expert: This supposes that you are fluent with GNU/Linux and want to perform a highly customized installation. As for a \"Customized\" installation class, you will be able to select the usage for your system. But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE DOING! "), selectInstallClass2 => __("The different choices for your machine's usage (provided, hence, that you have chosen either \"Custom\" or \"Expert\" as an installation class) are the following: - Normal: choose this if you intend to use your machine primarily for everyday use (office work, graphics manipulation and so on). Do not expect any compiler, development utility et al. installed. - Development: as its name says. Choose this if you intend to use your machine primarily for software development. You will then have a complete collection of software installed in order to compile, debug and format source code, or create software packages. - Server: choose this if the machine which you're installing Linux-Mandrake on is intended to be used as a server. Either a file server (NFS or SMB), a print server (Unix' lp (Line Printer) protocol or Windows style SMB printing), an authentication server (NIS), a database server and so on. As such, do not expect any gimmicks (KDE, GNOME...) to be installed. "), setupSCSI => __("DrakX will attempt to look for PCI SCSI adapter(s). If DrakX finds a SCSI adapter and knows which driver to use it will automatically install it (or them). If you have no SCSI adapter, an ISA SCSI adapter, or a PCI SCSI adapter that DrakX doesn't recognize you will be asked if a SCSI adapter is present in your system. If there is no adapter present you can just click 'No'. If you click 'Yes' a list of drivers will be presented from which you can select your specific adapter. If you had to manually specify your adapter, DrakX will ask if you want to specify options for it. You should allow DrakX to probe the hardware for the options. This usually works well. If not, you will need to provide options to the driver. Review the Installation Guide for hints on retrieving this information from Windows (if you have it on your system), from hardware documentation, or from the manufacturer's website (if you have Internet access)."), doPartitionDisks => __("At this point, you may choose what partition(s) to use to install your Linux-Mandrake system if they have been already defined (from a previous install of GNU/Linux or from another partitioning tool). In other cases, hard drive partitions must be defined. This operation consists of logically dividing the computer's hard drive capacity into separate areas for use. If you have to create new partitions, use \"Auto allocate\" to automatically create partitions for GNU/Linux. You can select the disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb\" for the second or \"sda\" for the first SCSI drive and so on. Two common partition are: the root partition (/), which is the starting point of the filesystem's directory hierarchy, and /boot, which contains all files necessary to start the operating system when the computer is first turned on. Because the effects of this process are usually irreversible, partitioning can be intimidating and stressful to the unexperienced user. DiskDrake simplifies the process so that it must not be. Consult the documentation and take your time before proceeding. You can reach any option using the keyboard: navigate through the partitions using Tab and Up/Down arrows. When a partition is selected, you can use: - Ctrl-c to create a new partition (when an empty partition is selected) - Ctrl-d to delete a partition - Ctrl-m to set the mount point "), formatPartitions => __("Any partitions that have been newly defined must be formatted for use (formatting meaning creating a filesystem). At this time, you may wish to re-format some already existing partitions to erase the data they contain. Note: it is not necessary to re-format pre-existing partitions, particularly if they contain files or data you wish to keep. Typically retained are /home and /usr/local."), choosePackages => __("You may now select the group of packages you wish to install or upgrade. DrakX will then check whether you have enough room to install them all. If not, it will warn you about it. If you want to go on anyway, it will proceed onto the installation of all selected groups but will drop some packages of lesser interest. At the bottom of the list you can select the option \"Individual package selection\"; in this case you will have to browse through more than 1000 packages..."), chooseCD => __("If you have all the CDs in the list above, click Ok. If you have none of those CDs, click Cancel. If only some CDs are missing, unselect them, then click Ok."), installPackages => __("The packages selected are now being installed. This operation should take a few minutes unless you have chosen to upgrade an existing system, in that case it can take more time even before upgrade starts."), selectMouse => __("If DrakX failed to find your mouse, or if you want to check what it has done, you will be presented the list of mice above. If you agree with DrakX's settings, just click 'Ok'. Otherwise you may choose the mouse that more closely matches your own from the menu above. In case of a serial mouse, you will also have to tell DrakX which serial port it is connected to."), selectSerialPort => __("Please select the correct port. For example, the COM1 port under MS Windows is named ttyS0 under GNU/Linux."), configureNetwork => __("This section is dedicated to configuring a local area network (LAN) or a modem. Choose \"Local LAN\" and DrakX will try to find an Ethernet adapter on your machine. PCI adapters should be found and initialized automatically. However, if your peripheral is ISA, autodetection will not work, and you will have to choose a driver from the list that will appear then. As for SCSI adapters, you can let the driver probe for the adapter in the first time, otherwise you will have to specify the options to the driver that you will have fetched from documentation of your hardware. If you install a Linux-Mandrake system on a machine which is part of an already existing network, the network administrator will have given you all necessary information (IP address, network submask or netmask for short, and hostname). If you're setting up a private network at home for example, you should choose addresses. Choose \"Dialup with modem\" and the Internet connection with a modem will be configured. DrakX will try to find your modem, if it fails you will have to select the right serial port where your modem is connected to."), configureNetworkIP => __("Enter: - IP address: if you don't know it, ask your network administrator or ISP. - Netmask: \"255.255.255.0\" is generally a good choice. If you are not sure, ask your network administrator or ISP. - Automatic IP: If your network uses BOOTP or DHCP protocol, select this option. If selected, no value is needed in \"IP address\". If you are not sure, ask your network administrator or ISP. "), configureNetworkISP => __("You may now enter dialup options. If you're not sure what to enter, the correct information can be obtained from your ISP."), configureNetworkProxy => __("If you will use proxies, please configure them now. If you don't know if you should use proxies, ask your network administrator or your ISP."), installCrypto => __("You can install cryptographic package if your internet connection has been set up correctly. First choose a mirror where you wish to download packages and after that select the packages to install. Note you have to select mirror and cryptographic packages according to your legislation."), configureTimezone => __("You can now select your timezone according to where you live. GNU/Linux manages time in GMT or \"Greenwich Mean Time\" and translates it in local time according to the time zone you have selected."), configureServices => __("You may now choose which services you want to see started at boot time. When your mouse comes over an item, a small balloon help will popup which describes the role of the service. Be especially careful in this step if you intend to use your machine as a server: you will probably want not to start any services which you don't want."), configurePrinter => __("GNU/Linux can deal with many types of printer. Each of these types require a different setup. Note however that the print spooler uses 'lp' as the default printer name; so you must have one printer with such a name; but you can give several names, separated by '|' characters, to a printer. So, if you prefer to have a more meaningful name you just have to put it first, eg: \"My Printer|lp\". The printer having \"lp\" in its name(s) will be the default printer. If your printer is physically connected to your computer, select \"Local printer\". You will then have to tell which port your printer is connected to, and select the appropriate filter. If you want to access a printer located on a remote Unix machine, you will have to select \"Remote lpd\". In order to make


context:
space:
mode: