diff options
Diffstat (limited to 'perl-install/Xconfigurator.pm')
| -rw-r--r-- | perl-install/Xconfigurator.pm | 1488 |
1 files changed, 0 insertions, 1488 deletions
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm deleted file mode 100644 index 8daf6a726..000000000 --- a/perl-install/Xconfigurator.pm +++ /dev/null @@ -1,1488 +0,0 @@ -package Xconfigurator; # $Id$ - -use diagnostics; -use strict; -use vars qw($in $do_pkgs @window_managers @depths @monitorSize2resolution @hsyncranges %min_hsync4wres @vsyncranges %depths @resolutions @resolutions_laptop %serversdriver @svgaservers @accelservers @allbutfbservers @allservers %vgamodes %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate %standard_monitors $XF86firstchunk_text $keyboardsection_start $keyboardsection_start_v4 $keyboardsection_part2 $keyboardsection_part3 $keyboardsection_part3_v4 $keyboardsection_end $pointersection_text $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text_ext $modelines_text $devicesection_text $devicesection_text_v4 $screensection_text1 %lines @options %xkb_options $good_default_monitor $low_default_monitor $layoutsection_v4 $modelines_text_apple); - -use common; -use log; -use detect_devices; -use run_program; -use Xconfigurator_consts; -use any; -use modules; -use my_gtk qw(:helpers :wrappers); - -my $tmpconfig = "/tmp/Xconfig"; - -my ($prefix, %monitors, %standard_monitors_); - - -sub xtest { - my ($display) = @_; - $::isStandalone ? - system("DISPLAY=$display /usr/X11R6/bin/xtest") == 0 : - c::Xtest($display); -} - -sub getVGAMode($) { $_[0]->{card}{vga_mode} || $vgamodes{"640x480x16"}; } - -sub readCardsDB { - my ($file) = @_; - my ($card, %cards); - - my $F = common::openFileMaybeCompressed($file); - - my ($lineno, $cmd, $val) = 0; - my $fs = { - LINE => sub { push @{$card->{lines}}, $val unless $val eq "VideoRam" }, - NAME => sub { - $cards{$card->{type}} = $card if $card; - $card = { type => $val }; - }, - SEE => sub { - my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno"; - - push @{$card->{lines}}, @{$c->{lines} || []}; - add2hash($card->{flags}, $c->{flags}); - add2hash($card, $c); - }, - CHIPSET => sub { - $card->{chipset} = $val; - $card->{flags}{needChipset} = 1 if $val eq 'GeForce DDR'; - $card->{flags}{needVideoRam} = 1 if member($val, qw(mgag10 mgag200 RIVA128 SiS6326)); - }, - SERVER => sub { $card->{server} = $val; }, - DRIVER => sub { $card->{driver} = $val; }, - RAMDAC => sub { $card->{ramdac} = $val; }, - DACSPEED => sub { $card->{dacspeed} = $val; }, - CLOCKCHIP => sub { $card->{clockchip} = $val; $card->{flags}{noclockprobe} = 1; }, - NOCLOCKPROBE => sub { $card->{flags}{noclockprobe} = 1 }, - UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 }, - COMMENT => sub {}, - }; - - local $_; - while (<$F>) { $lineno++; - s/\s+$//; - /^#/ and next; - /^$/ and next; - /^END/ and do { $cards{$card->{type}} = $card if $card; last }; - - ($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next; - - my $f = $fs->{$cmd}; - - $f ? $f->() : log::l("unknown line $lineno ($_)"); - } - \%cards; -} -sub readCardsNames { - my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames"; - map { (split '=>')[0] } grep { !/^#/ } catMaybeCompressed($file); -} -sub cardName2RealName { - my ($name) = @_; - my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames"; - foreach (catMaybeCompressed($file)) { - chop; - next if /^#/; - my ($name_, $real) = split '=>'; - return $real if $name eq $name_; - } - $name; -} -sub updateCardAccordingName { - my ($card, $name) = @_; - my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+"); - - add2hash($card->{flags}, $cards->{$name}{flags}); - add2hash($card, $cards->{$name}); - $card; -} - -sub readMonitorsDB { - my ($file) = @_; - - %monitors and return; - - my $F = common::openFileMaybeCompressed($file); - local $_; - my $lineno = 0; while (<$F>) { - $lineno++; - s/\s+$//; - /^#/ and next; - /^$/ and next; - - my @fields = qw(vendor type eisa hsyncrange vsyncrange dpms); - my @l = split /\s*;\s*/; - - my %l; @l{@fields} = @l; - if ($monitors{$l{type}}) { - my $i; for ($i = 0; $monitors{"$l{type} ($i)"}; $i++) {} - $l{type} = "$l{type} ($i)"; - } - $monitors{"$l{vendor}|$l{type}"} = \%l; - } - while (my ($k, $v) = each %standard_monitors) { - $monitors{'Generic|' . translate($k)} = $standard_monitors_{$k} = - { hsyncrange => $v->[1], vsyncrange => $v->[2] }; - } -} - -sub keepOnlyLegalModes { - my ($card, $monitor) = @_; - my $mem = 1024 * ($card->{memory} || ($card->{server} eq 'FBDev' ? 2048 : 32768)); #- limit to 2048x1536x64 - my $hsync = max(split(/[,-]/, $monitor->{hsyncrange})); - - while (my ($depth, $res) = each %{$card->{depth}}) { - @$res = grep { - $mem >= product(@$_, $depth / 8) && - $hsync >= ($min_hsync4wres{$_->[0]} || 0) && - ($card->{server} ne 'FBDev' || $vgamodes{"$_->[0]x$_->[1]x$depth"}) - } @$res; - delete $card->{depth}{$depth} if @$res == 0; - } -} - -sub cardConfigurationAuto() { - my @cards; - if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) { - foreach my $i (0..$#c) { - local $_ = $c[$i]->{driver}; - my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) }; - $card->{type} = $1 if /Card:(.*)/; - $card->{server} = $1 if /Server:(.*)/; - $card->{flags}{needVideoRam} = /86c368|S3 Inc/; - $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}"; - push @{$card->{lines}}, @{$lines{$card->{identifier}} || []}; - push @cards, $card; - } - } - #- take a default on sparc if nothing has been found. - if (arch() =~ /^sparc/ && !@cards) { - log::l("Using probe with /proc/fb as nothing has been found!"); - local $_ = cat_("/proc/fb"); - if (/Mach64/) { push @cards, { server => "Mach64" } } - elsif (/Permedia2/) { push @cards, { server => "3DLabs" } } - else { push @cards, { server => "Sun24" } } - } - #- special case for dual head card using only one busid. - @cards = map { my $dup = $_->{identifier} =~ /MGA G450/ ? 2 : 1; - if ($dup > 1) { - my @result; - my $orig = $_; - foreach (1..$dup) { - my $card = {}; - add2hash($card, $orig); - push @result, $card; - } - @result; - } else { - ($_); - } - } @cards; - #- make sure no type are already used, duplicate both screen - #- and rename type (because used as id). - if (@cards > 1) { - my $card = 1; - foreach (@cards) { - updateCardAccordingName($_, $_->{type}) if $_->{type}; - $_->{type} = "$_->{type} $card"; - $card++; - } - } - #- in case of only one cards, remove all busid reference, this will avoid - #- need of change of it if the card is moved. - #- on many PPC machines, card is on-board, busid is important, leave? - @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/; - @cards; -} - -sub cardConfiguration(;$$$) { - my ($card, $noauto, $cardOptions) = @_; - $card ||= {}; - - updateCardAccordingName($card, $card->{type}) if $card->{type}; #- try to get info from given type - undef $card->{type} unless $card->{server}; #- bad type as we can't find the server - my @cards = cardConfigurationAuto(); - if (@cards > 1 && ($noauto || !$card->{server})) {#} && !$::isEmbedded) { - my (%single_heads, @choices, $tc); - my $configure_multi_head = sub { - add2hash($card, $cards[0]); #- assume good default. - delete $card->{cards} if $noauto; - $card->{cards} or $card->{cards} = \@cards; - $card->{force_xf4} = 1; #- force XF4 in such case. - $card->{Xinerama} = $_[0]; - }; - foreach (@cards) { - unless ($_->{driver} && !$_->{flags}{unsupported}) { - log::l("found card \"$_->{identifier}\" not supported by XF4, disabling mutli-head support"); - $configure_multi_head = undef; - } - #- if more than one card use the same BusID, we have to use screen. - if ($single_heads{$_->{busid}}) { - $single_heads{$_->{busid}}{screen} ||= 0; - $_->{screen} = $single_heads{$_->{busid}}{screen} + 1; - } - $single_heads{$_->{busid}} = $_; - } - if ($configure_multi_head) { - push @choices, { text => _("Configure all heads independently"), code => sub { $configure_multi_head->('') } }; - push @choices, { text => _("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } }; - } - foreach my $e (values %single_heads) { - push @choices, { text => _("Configure only card \"%s\" (%s)", $e->{identifier}, $e->{busid}), - code => sub { add2hash($card, $e); foreach (qw(cards screen Xinerama)) { delete $card->{$_} } } }; - } - $tc = $in->ask_from_listf(_("Multi-head configuration"), -_("Your system support multiple head configuration. -What do you want to do?"), sub { translate($_[0]{text}) }, \@choices) or return; #- no more die, CHECK with auto that return ''! - $tc->{code} and $tc->{code}(); - } else { - #- only one head found, configure it as before. - add2hash($card, $cards[0]) unless $card->{server} || $noauto; - delete $card->{cards}; delete $card->{Xinerama}; - } - $card->{server} = 'FBDev' unless !$cardOptions->{allowFB} || $card->{server} || $card->{type} || $noauto; - $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphic card"), _("Select a graphic card"), '|', ['Other|Unlisted', readCardsNames()])) unless $card->{type} || $card->{server}; - undef $card->{type}, $card->{server} = $in->ask_from_list(_("X server"), _("Choose a X server"), $cardOptions->{allowFB} ? \@allservers : \@allbutfbservers ) or return if $card->{type} eq 'Other|Unlisted'; - - updateCardAccordingName($card, $card->{type}) if $card->{type}; - add2hash($card, { vendor => "Unknown", board => "Unknown" }); - - foreach ($card, @{$card->{cards} || []}) { - $_->{memory} = 4096, delete $_->{depth} if $_->{driver} eq 'i810'; - $_->{memory} = 16384, delete $_->{depth} if $_->{chipset} =~ /PERMEDIA/ && $_->{memory} <= 1024; - } - #- 3D acceleration configuration for XFree 3.3 using Utah-GLX. - $card->{Utah_glx} = ($card->{identifier} =~ /Matrox.* G[24][05]0/ || #- 8bpp does not work. - $card->{identifier} =~ /Riva.*128/ || - $card->{identifier} =~ /Rage X[CL]/ || - $card->{identifier} =~ /3D Rage (?:LT|Pro)/); - #- NOT WORKING $card->{type} =~ /Intel 810/); - $card->{Utah_glx} = '' if arch() =~ /ppc/; #- No 3D XFree 3.3 for PPC - #- 3D acceleration configuration for XFree 3.3 using Utah-GLX but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED). - $card->{Utah_glx_EXPERIMENTAL} = ($card->{type} =~ /RIVA TNT/ || #- all RIVA/GeForce comes from NVIDIA and may freeze (gltron). - #$card->{type} =~ /RIVA128/ || - $card->{type} =~ /GeForce 256/ || - $card->{type} =~ /S3 Savage3D/ || #- only this one is evoluting (expect a stable release ?) - #- $card->{type} =~ /S3 ViRGE/ || #- 15bits only - $card->{identifier} =~ /Rage Mobility (?:P\/M|L) / || - $card->{type} =~ /SiS/); - #- 3D acceleration configuration for XFree 4 using DRI. - $card->{DRI_glx} = ($card->{identifier} =~ /Voodoo [35]/ || $card->{identifier} =~ /Voodoo Banshee/ || #- 16bit only - $card->{identifier} =~ /Matrox.* G[24][05]0.*AGP/ || #- prefer 16bit with AGP only - $card->{identifier} =~ /8281[05].* CGC/ || #- 16bits (Intel 810 & 815). - #$card->{identifier} =~ /Radeon / || #- 16bits preferable ? - $card->{identifier} =~ /Rage 128/); #- 16 and 32 bits, prefer 16bit as no DMA. - #- 3D acceleration configuration for XFree 4 using DRI but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED). - $card->{DRI_glx_EXPERIMENTAL} = ($card->{identifier} =~ /SiS.*6C?326/ || #- prefer 16bit, other ? - $card->{identifier} =~ /SiS.*6C?236/ || - $card->{identifier} =~ /SiS.*630/ || - $card->{identifier} =~ /Radeon /); #- 16bits preferable ? - #- 3D acceleration configuration for XFree 4 using NVIDIA driver (TNT, TN2 and GeForce cards only). - $card->{NVIDIA_glx} = $cardOptions->{allowNVIDIA_rpms} && ($card->{identifier} =~ /[nN]Vidia.*T[nN]T2/ || #- TNT2 cards - $card->{identifier} =~ /[nN]Vidia.*NV[56]/ || - $card->{identifier} =~ /[nN]Vidia.*Vanta/ || - $card->{identifier} =~ /[nN]Vidia.*GeForce/ || #- GeForce cards - $card->{identifier} =~ /[nN]Vidia.*NV1[15]/ || - $card->{identifier} =~ /[nN]Vidia.*Quadro/); - #- check to use XFree 4 or XFree 3.3. - $card->{use_xf4} = $card->{driver} && !$card->{flags}{unsupported}; - $card->{force_xf4} = arch() =~ /ppc/; #- try to figure out ugly hack for PPC (recommend XF4 always so...) - $card->{prefer_xf3} = !$card->{force_xf4} && ($card->{type} =~ /RIVA TNT/ || - $card->{type} =~ /RIVA128/ || - $card->{type} =~ /GeForce/ || - $card->{type} =~ /SiS / && $card->{type} !~ /SiS 6326/ || - $card->{type} =~ /NeoMagic /); - #- take into account current environment in standalone to keep - #- the XFree86 version. - if ($::isStandalone) { - readlink("$prefix/etc/X11/X") =~ /XFree86/ and $card->{prefer_xf3} = 0; - readlink("$prefix/etc/X11/X") =~ /XF86_/ and $card->{prefer_xf3} = !$card->{force_xf4}; - } - - #- basic installation, use of XFree 4.1 or XFree 3.3. - my ($xf4_ver, $xf3_ver) = ("4.1.0", "3.3.6"); - my $xf3_tc = { text => _("XFree %s", $xf3_ver), - code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = ''; $card->{use_xf4} = ''; - log::l("Using XFree $xf3_ver") } }; - my $msg = _("Which configuration of XFree do you want to have?"); - my @choices = $card->{use_xf4} ? (if_($card->{prefer_xf3}, $xf3_tc), - #- hack for Matrox driver where there are undefined reference if no DRI! - if_($card->{identifier} !~ /Matrox.* G[24][05]0/ && (!$card->{prefer_xf3} || $::expert), - { text => _("XFree %s", $xf4_ver), - code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = ''; - log::l("Using XFree $xf4_ver") } }), - if_(!$card->{prefer_xf3} && $::expert, $xf3_tc)) : $xf3_tc; - #- try to figure if 3D acceleration is supported - #- by XFree 3.3 but not XFree 4 then ask user to keep XFree 3.3 ? - if ($card->{Utah_glx}) { - $msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ? -_("Your card can have 3D hardware acceleration support but only with XFree %s. -Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) : -_("Your card can have 3D hardware acceleration support with XFree %s.", $xf3_ver)) . "\n\n\n" . $msg; - $::expert or @choices = (); #- keep it by default here as it is the only choice available. - unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf3_ver), - code => sub { $card->{use_xf4} = ''; - log::l("Using XFree $xf3_ver with 3D hardware acceleration") } }; - } - - #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration. - if ($::expert && $card->{use_xf4} && $card->{DRI_glx_EXPERIMENTAL}) { - $msg = -_("Your card can have 3D hardware acceleration support with XFree %s, -NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf4_ver) . "\n\n\n" . $msg; - push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf4_ver), - code => sub { $card->{DRI_glx} = 'EXPERIMENTAL'; - log::l("Using XFree $xf4_ver with EXPERIMENTAL 3D hardware acceleration") } }; - } - - #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration, currenlty - #- this is with Utah GLX and so, it can provide a way of testing. - if ($::expert && $card->{Utah_glx_EXPERIMENTAL}) { - $msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ? -_("Your card can have 3D hardware acceleration support but only with XFree %s, -NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER. -Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) : -_("Your card can have 3D hardware acceleration support with XFree %s, -NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)) . "\n\n\n" . $msg; - push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf3_ver), - code => sub { $card->{use_xf4} = ''; $card->{Utah_glx} = 'EXPERIMENTAL'; - log::l("Using XFree $xf3_ver with EXPERIMENTAL 3D hardware acceleration") } }; - } - - #- ask the expert user to enable or not hardware acceleration support. - if ($card->{use_xf4} && ($card->{DRI_glx} || $card->{NVIDIA_glx})) { - $msg = _("Your card can have 3D hardware acceleration support with XFree %s.", $xf4_ver) . "\n\n\n" . $msg; - $::expert or @choices = (); #- keep all user by default with XFree 4 including 3D acceleration. - unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf4_ver), - code => sub { log::l("Using XFree $xf4_ver with 3D hardware acceleration") } }; - } - if (arch() =~ /ppc/) { - #- not much choice for PPC - we only have XF4, and Xpmac from the installer - @choices = { text => _("XFree %s", $xf4_ver), code => sub { $card->{xpmac} = ''; log::l("Using XFree $xf4_ver") } }; - push @choices, { text => _("Xpmac (installation display driver)"), code => sub { $card->{xpmac} = 1 }} if ($ENV{DISPLAY}); - } - #- examine choice of user, beware the list MUST NOT BE REORDERED AS the first item should be the - #- proposed one by DrakX. - my $tc = $in->ask_from_listf(_("XFree configuration"), formatAlaTeX($msg), sub { translate($_[0]{text}) }, \@choices) or return; - #- in case of class discarding, this can help ... - $tc or $tc = $choices[0]; - $tc->{code} and $tc->{code}(); - - if ($card->{xpmac} eq "1") { - log::l("Use Xpmac - great..."); - #- define this stuff just so XF86Config isn't empty - we don't need it for Xpmac - $card->{type} = "Xpmac Frame Buffer Driver"; - $card->{vendor} = $card->{board} = "None"; - $card->{driver} = $card->{server} = "Xpmac"; - } - - $card->{prog} = "/usr/X11R6/bin/" . ($card->{use_xf4} ? 'XFree86' : $card->{server} =~ /Sun(.*)/ ? - "Xsun$1" : "XF86_$card->{server}"); - - #- additional packages to install according available card. - #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO) - my @l = (); - if ($card->{DRI_glx}) { - push @l, 'Glide_V5' if $card->{identifier} =~ /Voodoo 5/; - push @l, 'Glide_V3-DRI' if $card->{identifier} =~ /Voodoo (3|Banshee)/; - push @l, 'XFree86-glide-module' if $card->{identifier} =~ /Voodoo/; - } elsif ($card->{NVIDIA_glx}) { - push @l, @{$cardOptions->{allowNVIDIA_rpms}}; - } - if ($card->{Utah_glx}) { - push @l, 'Mesa' if !$card->{use_xf4}; - } - if ($card->{xpmac} eq "1") { - push @l, 'XFree86-Xpmac'; - $card->{use_xf4} = ''; - $card->{prog} = "/usr/X11R6/bin/Xpmac"; - $card->{server} = 'Xpmac'; - } - - -x "$prefix$card->{prog}" or $do_pkgs->install($card->{use_xf4} ? 'XFree86-server' : "XFree86-$card->{server}", @l); - -x "$prefix$card->{prog}" or die "server $card->{server} is not available (should be in $prefix$card->{prog})"; - - #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else. - if ($card->{identifier} =~ /Matrox.* G[24][05]0/ && $card->{identifier} !~ /AGP/) { - log::l("disabling AGP mode for Matrox card, as it seems to be a PCI card"); - log::l("this is only used for XFree 3.3.6, see /etc/X11/glx.conf"); - substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$prefix/etc/X11/glx.conf"; - } - #- make sure everything is correct at this point, packages have really been installed - #- and driver and GLX extension is present. - if ($card->{NVIDIA_glx} && !$card->{DRI_glx} && (-e "$prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" && - -e "$prefix/usr/X11R6/lib/modules/extensions/libglx.so")) { - log::l("Using specific NVIDIA driver and GLX extensions"); - $card->{driver} = 'nvidia'; - } else { - $card->{NVIDIA_glx} = ''; - } - - delete $card->{depth}{32} if $card->{type} =~ /S3 Trio3D|SiS/; - $card->{options}{sw_cursor} = 1 if $card->{type} =~ /S3 Trio3D|SiS 6326/; - unless ($card->{type}) { - $card->{flags}{noclockprobe} = member($card->{server}, qw(I128 S3 S3V Mach64)); - } - $card->{options_xf3}{power_saver} = 1; - $card->{options_xf4}{DPMS} = 1; - - $card->{flags}{needVideoRam} and - $card->{memory} ||= $videomemory{$in->ask_from_list_('', _("Select the memory size of your graphic card"), - [ sort { $videomemory{$a} <=> $videomemory{$b} } - keys %videomemory]) || return}; - - #- hack for ATI Mach64 cards where two options should be used if using Utah-GLX. - if ($card->{identifier} =~ /Rage X[CL]/ || - $card->{identifier} =~ /Rage Mobility (?:P\/M|L) / || - $card->{identifier} =~ /3D Rage (?:LT|Pro)/) { - $card->{options_xf3}{no_font_cache} = $card->{Utah_glx}; - $card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx}; - } - #- hack for SiS cards where an option should be used if using Utah-GLX. - if ($card->{type} =~ /SiS /) { - $card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx}; - } - - #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default - #- but for some there is a need to specify VideoRam (else it won't run). - if ($card->{DRI_glx}) { - $card->{identifier} =~ /Matrox.* G[24]00/ and $card->{flags}{needVideoRam} = 'fakeVideoRam'; - $card->{identifier} =~ /8281[05].* CGC/ and ($card->{flags}{needVideoRam}, $card->{memory}) = ('fakeVideoRam', 16384); - } - - if (!$::isStandalone && $card->{driver} eq 'i810') { - require modules; - eval { modules::load("agpgart"); }; - } - $card; -} - -sub optionsConfiguration($) { - my ($o) = @_; - my @l; - my %l; - - foreach (@options) { - if ($o->{card}{server} eq $_->[1] && $o->{card}{identifier} =~ /$_->[2]/) { - my $options = 'options_' . ($o->{card}{server} eq 'XFree86' ? 'xf4' : 'xf3'); - $o->{card}{$options}{$_->[0]} ||= 0; - unless ($l{$_->[0]}) { - push @l, { label => $_->[0], val => \$o->{card}{$options}{$_->[0]}, type => 'bool' }; - $l{$_->[0]} = 1; - } - } - } - @l = @l[0..9] if @l > 9; #- reduce list size to 10 for display - - $in->ask_from('', _("Choose options for server"), \@l); -} - -sub monitorConfiguration(;$$) { - my $monitor = shift || {}; - my $useFB = shift || 0; - - if ($monitor->{hsyncrange} && $monitor->{vsyncrange}) { - add2hash($monitor, { type => "monitor1", vendor => "Unknown", model => "Unknown" }); - return $monitor; - } - - readMonitorsDB("$ENV{SHARE_PATH}/ldetect-lst/MonitorsDB"); - - if ($monitor->{EISA_ID}) { - if (my ($mon) = grep { lc($_->{eisa}) eq $monitor->{EISA_ID} } values %monitors) { - add2hash($monitor, $mon); - return $monitor; - } - } - - my $good_default = (arch() =~ /ppc/ ? 'Apple|' : 'Generic|') . translate($good_default_monitor); - $monitor->{type} ||= - ($::auto_install ? $low_default_monitor : - $in->ask_from_treelist(_("Monitor"), _("Choose a monitor"), '|', ['Custom', keys %monitors], $good_default)); - if ($monitor->{type} eq 'Custom') { - $in->ask_from('', -_("The two critical parameters are the vertical refresh rate, which is the rate -at which the whole screen is refreshed, and most importantly the horizontal -sync rate, which is the rate at which scanlines are displayed. - -It is VERY IMPORTANT that you do not specify a monitor type with a sync range -that is beyond the capabilities of your monitor: you may damage your monitor. - If in doubt, choose a conservative setting."), - [ { val => \$monitor->{hsyncrange}, list => \@hsyncranges, label => _("Horizontal refresh rate") }, - { val => \$monitor->{vsyncrange}, list => \@vsyncranges, label => _("Vertical refresh rate") }]); - } else { - add2hash($monitor, $monitors{$monitor->{type}} || $standard_monitors_{$monitor->{type}}); - } - add2hash($monitor, { type => "Unknown", vendor => "Unknown", model => "Unknown", manual => 1 }); -} - -sub testConfig($) { - my ($o) = @_; - my ($resolutions, $clocklines); - - write_XF86Config($o, $tmpconfig); - - unlink "/tmp/.X9-lock"; - #- restart_xfs; - - my $f = $tmpconfig . ($o->{card}{use_xf4} && "-4"); - local *F; open F, "$prefix$o->{card}{prog} :9 -probeonly -pn -xf86config $f 2>&1 |"; - local $_; - while (<F>) { - $o->{card}{memory} ||= $2 if /(videoram|Video RAM):\s*(\d*)/; - - # look for clocks - push @$clocklines, $1 if /clocks: (.*)/ && !/(pixel |num)clocks:/; - - push @$resolutions, [ $1, $2 ] if /: Mode "(\d+)x(\d+)": mode clock/; - print; - } - close F or die "X probeonly failed"; - - ($resolutions, $clocklines); -} - -sub testFinalConfig { - my ($o, $auto, $skiptest, $skip_badcard) = @_; - - $o->{monitor}{hsyncrange} && $o->{monitor}{vsyncrange} or - $in->ask_warn('', _("Monitor not configured")), return; - - $o->{card}{server} || $o->{card}{driver} or - $in->ask_warn('', _("Graphic card not configured yet")), return; - - $o->{card}{depth} or - $in->ask_warn('', _("Resolutions not chosen yet")), return; - - my $f = "/etc/X11/XF86Config.test"; - write_XF86Config($o, $::testing ? $tmpconfig : "$prefix/$f"); - - $skiptest || $o->{card}{server} =~ 'FBDev|Sun' and return 1; #- avoid testing with these. - - #- needed for bad cards not restoring cleanly framebuffer - my $bad_card = $o->{card}{identifier} =~ /i740|ViRGE|S3 Inc|Rage Mobility (?:P\/M|L) |3D Rage LT/; - $bad_card ||= $o->{card}{use_xf4}; #- TODO obsoleted to check, when using fbdev of XFree 4! - log::l("the graphic card does not like X in framebuffer") if $bad_card; - - my $verybad_card = $o->{card}{driver} eq 'i810'; - $verybad_card ||= $o->{card}{driver} eq 'nvidia' && !$::isStandalone; #- avoid testing during install at any price. - $verybad_card and return 1; - - my $mesg = _("Do you want to test the configuration?"); - my $def = 1; - if ($bad_card && !$::isStandalone) { - $skip_badcard and return 1; - $mesg = $mesg . "\n" . _("Warning: testing this graphic card may freeze your computer"); - $def = 0; - } - $auto && $def or $in->ask_yesorno(_("Test of the configuration"), $mesg, $def) or return 1; - - unlink "$prefix/tmp/.X9-lock"; - - #- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one - #- that way, you can talk to :9 without doing a chroot - #- but take care of non X11 install :-) - if (-d "/tmp/.X11-unix") { - symlinkf "$prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $prefix; - } else { - symlinkf "$prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $prefix; - } - #- restart_xfs; - - my $f_err = "$prefix/tmp/Xoutput"; - my $pid; - unless ($pid = fork) { - open STDERR, ">$f_err"; - chroot $prefix if $prefix; - exec $o->{card}{prog}, - if_($o->{card}{prog} !~ /Xsun/, "-xf86config", ($::testing ? $tmpconfig : $f) . ($o->{card}{use_xf4} && "-4")), - ":9" or c::_exit(0); - } - - do { sleep 1 } until xtest(":9") || waitpid($pid, c::WNOHANG()); - - my $b = before_leaving { unlink $f_err }; - - unless (xtest(":9")) { - local $_; - local *F; open F, $f_err; - i: while (<F>) { - if (/\b(error|not supported)\b/i) { - my @msg = !/error/ && $_ ; - while (<F>) { - /not fatal/ and last i; - /^$/ and last; - push @msg, $_; - } - $in->ask_warn('', [ _("An error has occurred:"), " ", @msg, _("\ntry to change some parameters") ]); - return 0; - } - } - } - - local *F; - open F, "|perl 2>/dev/null" or die ''; - print F "use lib qw(", join(' ', @INC), ");\n"; - print F q{ - use interactive_gtk; - use my_gtk qw(:wrappers); - - $ENV{DISPLAY} = ":9"; - - gtkset_background(200 * 257, 210 * 257, 210 * 257); - my ($h, $w) = Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW)->get_size; - $my_gtk::force_position = [ $w / 3, $h / 2.4 ]; - $my_gtk::force_focus = 1; - my $text = Gtk::Label->new; - my $time = 8; - Gtk->timeout_add(1000, sub { - $text->set(_("Leaving in %d seconds", $time)); - $time-- or Gtk->main_quit; - 1; - }); - - my $background = "/usr/share/pixmaps/backgrounds/mandrakelinux/XFdrake-image-test.jpg"; - my $qiv = "/usr/bin/qiv"; - -r "} . $prefix . q{/$background" && -x "} . $prefix . q{/$qiv" and - system(($::testing ? "} . $prefix . q{" : "chroot } . $prefix . q{/ ") . "$qiv -y $background"); - - my $in = interactive_gtk->new; - $in->exit($in->ask_yesorno('', [ _("Is this the correct setting?"), $text ], 0) ? 0 : 222); - }; - my $rc = close F; - my $err = $?; - - unlink "/tmp/.X11-unix/X9" if $prefix; - kill 2, $pid; - - $rc || $err == 222 << 8 or $in->ask_warn('', _("An error has occurred, try to change some parameters")); - $rc; -} - -sub autoDefaultDepth($$) { - my ($card, $wres_wanted) = @_; - my ($best, $depth); - - return 16 if $card->{Utah_glx} || $card->{DRI_glx}; #- assume 16bit as most of them need 16. - - for ($card->{server}) { - /FBDev/ and return 16; #- this should work by default, FBDev is allowed only if install currently uses it at 16bpp. - /Sun24/ and return 24; - /SunMono/ and return 2; - /Sun/ and return 8; - } - - while (my ($d, $r) = each %{$card->{depth}}) { - $depth = max($depth || 0, $d); - - #- try to have resolution_wanted - $best = max($best || 0, $d) if $r->[0][0] >= $wres_wanted; - $best = $card->{suggest_depth}, last if ($card->{suggest_depth} && - $card->{suggest_wres} && $r->[0][0] >= $card->{suggest_wres}); - } - $best || $depth or die "no valid modes"; -} - -sub autoDefaultResolution { - # return "1024x768" if detect_devices::hasPCMCIA; - - if (arch() =~ /ppc/) { - return "1024x768" if detect_devices::get_mac_model =~ /^PowerBook|^iMac/; - } - - my ($size) = @_; - $monitorSize2resolution[round($size || 14)] || #- assume a small monitor (size is in inch) - $monitorSize2resolution[-1]; #- no corresponding resolution for this size. It means a big monitor, take biggest we have -} - -sub chooseResolutionsGtk($$;$) { - my ($card, $chosen_depth, $chosen_w) = @_; - - require my_gtk; - my_gtk->import(qw(:wrappers)); - - my $W = my_gtk->new(_("Resolution")); - my %txt2depth = reverse %depths; - my ($r, $depth_combo, %w2depth, %w2h, %w2widget, $pix_monitor, $pix_colors, $w2_combo); - $w2_combo = new Gtk::Combo; - my $best_w; - while (my ($depth, $res) = each %{$card->{depth}}) { - foreach (@$res) { - $w2h{$_->[0]} = $_->[1]; - push @{$w2depth{$_->[0]}}, $depth; - - $best_w = max($_->[0], $best_w) if $_->[0] <= $chosen_w; - } - } - $chosen_w = $best_w; - - my $set_depth = sub { $depth_combo->entry->set_text(translate($depths{$chosen_depth})) }; - - #- the set function is usefull to toggle the CheckButton with the callback being ignored - my $ignore; - my $no_human; # is the w2_combo->entry changed by a human? - my $set = sub { $ignore = 1; $_[0]->set_active(1); $ignore = 0; }; - - my %monitor; - $monitor{$_} = [ gtkcreate_png("monitor-" . $_ . ".png") ] foreach (640, 800, 1024, 1280); - $monitor{1152} = [ gtkcreate_png("monitor-" . 1024 . ".png") ]; - $monitor{1600} = [ gtkcreate_png("monitor-" . 1280 . ".png") ]; - - my $pixmap_m = new Gtk::Pixmap( $monitor{$chosen_w}[0] , $monitor{$chosen_w}[1] ); - - while (my ($w, $h) = each %w2h) { - my $V = $w . "x" . $h; - $w2widget{$w} = $r = new Gtk::RadioButton($r ? ($V, $r) : $V); - if ($chosen_w == $w) { - &$set($r); - } - $r->signal_connect("clicked" => sub { - $ignore and return; - $chosen_w = $w; - $no_human=1; - $w2_combo->entry->set_text($w . "x" . $w2h{$w}); - unless (member($chosen_depth, @{$w2depth{$w}})) { - $chosen_depth = max(@{$w2depth{$w}}); - &$set_depth(); - } - }); - } - gtkadd($W->{window}, - gtkpack_($W->create_box_with_title(_("Choose the resolution and the color depth"), - "(" . ($card->{type} ? - _("Graphic card: %s", $card->{type}) : - _("XFree86 server: %s", $card->{server})) . ")" - ), - 1, gtkpack2(new Gtk::VBox(0,0), - gtkpack2__(new Gtk::VBox(0, $::isEmbedded ? 15 : 0), - if_($::isEmbedded, $pixmap_m), - if_(!$::isEmbedded, map {$w2widget{$_} } ikeys(%w2widget)), - gtkpack2(new Gtk::HBox(0,0), - create_packtable({ col_spacings => 5, row_spacings => 5}, - [ if_($::isEmbedded,$w2_combo) , new Gtk::Label("")], - [ $depth_combo = new Gtk::Combo, gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'), $pix_colors = gtkpng ("colors")) ], - ), - ), - ), - ), - 0, gtkadd($W->create_okcancel, - $::isEmbedded ? - gtksignal_connect(new Gtk::Button(_("Expert Mode")), clicked => sub { system ("XFdrake --expert"); }) : - gtksignal_connect(new Gtk::Button(_("Show all")), clicked => sub { $W->{retval} = 1; $chosen_w = 0; Gtk->main_quit })), - )); - $depth_combo->disable_activate; - $depth_combo->set_use_arrows_always(1); - $depth_combo->entry->set_editable(0); - $depth_combo->set_popdown_strings(map { translate($depths{$_}) } ikeys(%{$card->{depth}})); - $depth_combo->entry->signal_connect(changed => sub { - $chosen_depth = $txt2depth{untranslate($depth_combo->entry->get_text, keys %txt2depth)}; - my $w = $card->{depth}{$chosen_depth}[0][0]; - $chosen_w > $w and &$set($w2widget{$chosen_w = $w}); - $pix_colors->set(gtkcreate_png( - $chosen_depth >= 24 ? "colors.png" : - $chosen_depth >= 15 ? "colors16.png" : - "colors8.png")); - }); - if ($::isEmbedded) { - $w2_combo->disable_activate; - $w2_combo->set_use_arrows_always(1); - $w2_combo->entry->set_editable(0); - $w2_combo->set_popdown_strings(map { $_ . "x" . $w2h{$_} } keys %w2h); - $w2_combo->entry->signal_connect(changed => sub { - ($chosen_w) = $w2_combo->entry->get_text =~ /([^x]*)x.*/; - $no_human ? $no_human=0 : $w2widget{$chosen_w}->set_active(1); - $pixmap_m->set($monitor{$chosen_w}[0], $monitor{$chosen_w}[1]); - }); - } - &$set_depth(); - $W->{ok}->grab_focus; - - if ($::isEmbedded) { - $no_human=1; - $w2_combo->entry->set_text($chosen_w . "x" . $w2h{$chosen_w}); - } - $W->main or return; - ($chosen_depth, $chosen_w); -} - -sub chooseResolutions($$;$) { - goto &chooseResolutionsGtk if $in->isa('interactive_gtk'); - - my ($card, $chosen_depth, $chosen_w) = @_; - - my $best_w; - local $_ = $in->ask_from_list(_("Resolutions"), "", - [ map_each { map { "$_->[0]x$_->[1] ${main::a}bpp" } @$::b } %{$card->{depth}} ]) or return; - reverse /(\d+)x\S+ (\d+)/; -} - - -sub resolutionsConfiguration { - my ($o, $auto) = @_; - my $card = $o->{card}; - - #- For the mono and vga16 server, no further configuration is required. - if (member($card->{server}, "Mono", "VGA16")) { - $card->{depth}{8} = [[ 640, 480 ]]; - return; - } elsif ($card->{server} =~ /Sun/) { - $card->{depth}{2} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono)$/; - $card->{depth}{8} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun)$/; - $card->{depth}{24} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun|Sun24)$/; - $card->{default_wres} = 1152; - $o->{default_depth} = max(keys %{$card->{depth}}); - return 1; #- aka we cannot test, assumed as good (should be). - } - if (is_empty_hash_ref($card->{depth})) { - $card->{depth}{$_} = [ map { [ split "x" ] } (detect_devices::isLaptop() ? @resolutions_laptop : @resolutions) ] - foreach @depths; - } - #- sort resolutions in each depth - foreach (values %{$card->{depth}}) { - my $i = 0; - @$_ = grep { first($i != $_->[0], $i = $_->[0]) } - sort { $b->[0] <=> $a->[0] } @$_; - } - - #- remove unusable resolutions (based on the video memory size and the monitor hsync rate) - keepOnlyLegalModes($card, $o->{monitor}); - - my $res = $o->{resolution_wanted} || $card->{suggest_wres} || autoDefaultResolution($o->{monitor}{size}); - my $wres = first(split 'x', $res); - - #- take the first available resolution <= the wanted resolution - $wres = max map { first(grep { $_->[0] <= $wres } @$_)->[0] } values %{$card->{depth}}; - my $depth = eval { $o->{default_depth} || autoDefaultDepth($card, $wres) }; - - $auto or ($depth, $wres) = chooseResolutions($card, $depth, $wres) or return; - - #- if nothing has been found for wres, - #- try to find if memory used by mode found match the memory available - #- card, if this is the case for a relatively low resolution ( < 1024 ), - #- there could be a problem. - #- memory in KB is approximated by $wres*$dpeth/14 which is little less - #- than memory really used, (correct factor is 13.65333 for w/h ratio of 1.33333). - if (!$wres || $auto && ref($in) !~ /class_discard/ && ($wres < 1024 && ($card->{memory} / ($wres * $depth / 14)) > 2)) { - delete $card->{depth}; - return resolutionsConfiguration($o); - } - - #- needed in auto mode when all has been provided by the user - $card->{depth}{$depth} or die "you selected an unusable depth"; - - #- remove all biggest resolution (keep the small ones for ctl-alt-+) - #- otherwise there'll be a virtual screen :( - $_ = [ grep { $_->[0] <= $wres } @$_ ] foreach values %{$card->{depth}}; - $card->{default_wres} = $wres; - $card->{vga_mode} = $vgamodes{"${wres}xx$depth"} || $vgamodes{"${res}x$depth"}; #- for use with frame buffer. - $o->{default_depth} = $depth; - 1; -} - - -#- Create the XF86Config file. -sub write_XF86Config { - my ($o, $file) = @_; - my $O; - - local (*F, *G); - open F, ">$file" or die "can't write XF86Config in $file: $!"; - open G, ">$file-4" or die "can't write XF86Config in $file-4: $!"; - - print F $XF86firstchunk_text; - print G $XF86firstchunk_text; - - #- Write keyboard section. - $O = $o->{keyboard}; - print F $keyboardsection_start; - print G $keyboardsection_start_v4; - print F qq( XkbDisable\n) unless $O->{xkb_keymap}; - print G qq( Option "XkbDisable"\n) unless $O->{xkb_keymap}; - print F $keyboardsection_part3; - print G $keyboardsection_part3_v4; - - $O->{xkb_model} ||= - arch() =~ /ppc/ ? 'macintosh' : - arch() =~ /sparc/ ? 'sun' : - $O->{xkb_keymap} eq 'br' ? 'abnt2' : 'pc105'; - print F qq( XkbModel "$O->{xkb_model}"\n); - print G qq( Option "XkbModel" "$O->{xkb_model}"\n); - - print F qq( XkbLayout "$O->{xkb_keymap}"\n); - print G qq( Option "XkbLayout" "$O->{xkb_keymap}"\n); - print F join '', map { " $_\n" } @{$xkb_options{$O->{xkb_keymap}} || []}; - print G join '', map { /(\S+)(.*)/; qq( Option "$1" $2\n) } @{$xkb_options{$O->{xkb_keymap}} || []}; - print F $keyboardsection_end; - print G $keyboardsection_end; - - #- Write pointer section. - my $pointer = sub { - my ($O, $id) = @_; - print F $id > 1 ? qq(Section "XInput"\n) : qq(Section "Pointer"\n); - $id > 1 and print F qq( SubSection "Mouse"\n); - print G qq(Section "InputDevice"\n\n); - $id > 1 and print F qq( DeviceName "Mouse$id"\n); - print G qq( Identifier "Mouse$id"\n); - print G qq( Driver "mouse"\n); - print F ($id > 1 && " ") . qq( Protocol "$O->{XMOUSETYPE}"\n); - print G qq( Option "Protocol" "$O->{XMOUSETYPE}"\n); - print F ($id > 1 && " ") . qq( Device "/dev/$O->{device}"\n); - print G qq( Option "Device" "/dev/$O->{device}"\n); - print F " AlwaysCore\n" if $id > 1; - #- this will enable the "wheel" or "knob" functionality if the mouse supports it - print F ($id > 1 && " ") . " ZAxisMapping 4 5\n" if $O->{nbuttons} > 3; - print F ($id > 1 && " ") . " ZAxisMapping 6 7\n" if $O->{nbuttons} > 5; - print G qq( Option "ZAxisMapping" "4 5"\n) if $O->{nbuttons} > 3; - print G qq( Option "ZAxisMapping" "6 7"\n) if $O->{nbuttons} > 5; - - print F "#" unless $O->{nbuttons} < 3; - print G "#" unless $O->{nbuttons} < 3; - print F ($id > 1 && " ") . qq( Emulate3Buttons\n); - print G qq( Option "Emulate3Buttons"\n); - print F "#" unless $O->{nbuttons} < 3; - print G "#" unless $O->{nbuttons} < 3; - print F ($id > 1 && " ") . qq( Emulate3Timeout 50\n\n); - print G qq( Option "Emulate3Timeout" "50"\n\n); - print F "# ChordMiddle is an option for some 3-button Logitech mice\n\n"; - print G "# ChordMiddle is an option for some 3-button Logitech mice\n\n"; - print F "#" unless $O->{chordmiddle}; - print G "#" unless $O->{chordmiddle}; - print F ($id > 1 && " ") . qq( ChordMiddle\n\n); - print G qq( Option "ChordMiddle"\n\n); - print F ($id > 1 && " ") . " ClearDTR\n" if $O->{cleardtrrts}; - print F ($id > 1 && " ") . " ClearRTS\n\n" if $O->{cleardtrrts}; - $id > 1 and print F qq( EndSubSection\n); - print F "EndSection\n\n\n"; - print G "EndSection\n\n\n"; - }; - print F $pointersection_text; - print G $pointersection_text; - $pointer->($o->{mouse}, 1); - $o->{mouse}{auxmouse} and $pointer->($o->{mouse}{auxmouse}, 2); - - #- write module section for version 3. - if (@{$o->{wacom}} || $o->{card}{Utah_glx}) { - print F qq(Section "Module" -); - print F qq( Load "xf86Wacom.so"\n) if @{$o->{wacom}}; - print F qq( Load "glx-3.so"\n) if $o->{card}{Utah_glx}; #- glx.so may clash with server version 4. - print F qq(EndSection - -); - } - - #- write wacom device support. - foreach (1 .. @{$o->{wacom}}) { - my $dev = "/dev/" . $o->{wacom}[$_-1]; - print F $dev =~ /input\/event/ ? qq( -Section "XInput" - SubSection "WacomStylus" - Port "$dev" - DeviceName "Stylus$_" - USB - AlwaysCore - Mode Absolute - EndSubSection - SubSection "WacomCursor" - Port "$dev" - DeviceName "Cursor$_" - USB - AlwaysCore - Mode Relative - EndSubSection - SubSection "WacomEraser" - Port "$dev" - DeviceName "Eraser$_" - USB - AlwaysCore - Mode Absolute - EndSubSection -EndSection - -) : qq( -Section "XInput" - SubSection "WacomStylus" - Port "$dev" - DeviceName "Stylus$_" - AlwaysCore - Mode Absolute - EndSubSection - SubSection "WacomCursor" - Port "$dev" - DeviceName "Sursor$_" - AlwaysCore - Mode Relative - EndSubSection - SubSection "WacomEraser" - Port "$dev" - DeviceName "Eraser$_" - AlwaysCore - Mode Absolute - EndSubSection -EndSection - -); - } - - foreach (1..@{$o->{wacom}}) { - my $dev = "/dev/" . $o->{wacom}[$_-1]; - print G $dev =~ /input\/event/ ? qq( -Section "InputDevice" - Identifier "Stylus$_" - Driver "wacom" - Option "Type" "stylus" - Option "Device" "$dev" - Option "Mode" "Absolute" - Option "USB" "on" -EndSection -Section "InputDevice" - Identifier "Eraser$_" - Driver "wacom" - Option "Type" "eraser" - Option "Device" "$dev" - Option "Mode" "Absolute" - Option "USB" "on" -EndSection -Section "InputDevice" - Identifier "Cursor$_" - Driver "wacom" - Option "Type" "cursor" - Option "Device" "$dev" - Option "Mode" "Relative" - Option "USB" "on" -EndSection -) : qq( -Section "InputDevice" - Identifier "Stylus$_" - Driver "wacom" - Option "Type" "stylus" - Option "Device" "$dev" - Option "Mode" "Absolute" -EndSection -Section "InputDevice" - Identifier "Eraser$_" - Driver "wacom" - Option "Type" "eraser" - Option "Device" "$dev" - Option "Mode" "Absolute" -EndSection -Section "InputDevice" - Identifier "Cursor$_" - Driver "wacom" - Option "Type" "cursor" - Option "Device" "$dev" - Option "Mode" "Relative" -EndSection -); - } - - #- write modules section for version 4. - print G qq( -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" -); - if ($o->{card}{DRI_glx}) { - print G qq( - Load "glx" - Load "dri" -); - } elsif ($o->{card}{NVIDIA_glx}) { - print G qq( -# This loads the NVIDIA GLX extension module. -# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE -# IT WILL LOAD XFree86 glx module and the server will crash. - - Load "/usr/X11R6/lib/modules/extensions/libglx.so" -); - } - print G qq( - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - - SubSection "extmod" - #Option "omit xfree86-dga" - EndSubSection - -# This loads the Type1 and FreeType font modules - - Load "type1" - Load "freetype" -EndSection -); - print G qq( - -Section "DRI" - Mode 0666 -EndSection - -) if $o->{card}{DRI_glx}; - - #- Write monitor section. - $O = $o->{monitor}; - print F $monitorsection_text1; - print G $monitorsection_text1; - print F qq( Identifier "$O->{type}"\n); - print G qq( Identifier "$O->{type}"\n); - print G qq( UseModes "Mac Modes"\n) if arch() =~ /ppc/; - print F qq( VendorName "$O->{vendor}"\n); - print G qq( VendorName "$O->{vendor}"\n); - print F qq( ModelName "$O->{model}"\n\n); - print G qq( ModelName "$O->{model}"\n\n); - print F $monitorsection_text2; - print G $monitorsection_text2; - print F qq( HorizSync $O->{hsyncrange}\n\n); - print G qq( HorizSync $O->{hsyncrange}\n\n); - print F $monitorsection_text3; - print G $monitorsection_text3; - print F qq( VertRefresh $O->{vsyncrange}\n\n); - print G qq( VertRefresh $O->{vsyncrange}\n\n); - print F $monitorsection_text4; - print F ($O->{modelines} || '') . ($o->{card}{type} eq "TG 96" ? - $modelines_text_Trident_TG_96xx : "$modelines_text$modelines_text_ext"); - print G $modelines_text_ext; - print F "\nEndSection\n\n\n"; - print G "\nEndSection\n\n\n"; - print G $modelines_text_apple if arch() =~ /ppc/; - foreach (2..@{$o->{card}{cards} || []}) { - print G qq(Section "Monitor"\n); - print G qq( Identifier "monitor$_"\n); - print G qq( VendorName "$O->{vendor}"\n); - print G qq( ModelName "$O->{model}"\n\n); - print G qq( HorizSync $O->{hsyncrange}\n); - print G qq( VertRefresh $O->{vsyncrange}\n); - print G qq(EndSection\n\n\n); - } - - #- Write Device section. - $O = $o->{card}; - print F $devicesection_text; - print G $devicesection_text_v4; - print F qq(Section "Device"\n); - print F qq( Identifier "$O->{type}"\n); - print F qq( VendorName "$O->{vendor}"\n); - print F qq( BoardName "$O->{board}"\n); - - print F "#" if $O->{chipset} && !$O->{flags}{needChipset}; - print F qq( Chipset "$O->{chipset}"\n) if $O->{chipset}; - - print F "#" if $O->{memory} && !$O->{flags}{needVideoRam}; - print F " VideoRam $O->{memory}\n" if $O->{memory}; - - print F map { " $_\n" } @{$O->{lines} || []}; - - print F qq( Ramdac "$O->{ramdac}"\n) if $O->{ramdac}; - print F qq( Dacspeed "$O->{dacspeed}"\n) if $O->{dacspeed}; - - if ($O->{clockchip}) { - print F qq( Clockchip "$O->{clockchip}"\n); - } else { - print F " # Clock lines\n"; - print F " Clocks $_\n" foreach (@{$O->{clocklines}}); - } - print F qq( - - # Uncomment following option if you see a big white block - # instead of the cursor! - # Option "sw_cursor" - -); - my $p = sub { - my $l = $O->{$_[0]}; - map { (!$l->{$_} && '#') . qq( Option "$_"\n) } keys %{$l || {}}; - }; - print F $p->('options'); - print F $p->('options_xf3'); - print F "EndSection\n\n\n"; - - #- configure all drivers here! - foreach (@{$O->{cards} || [ $O ]}) { - print G qq(Section "Device"\n); - print G qq( Identifier "$_->{type}"\n); - print G qq( VendorName "$_->{vendor}"\n); - print G qq( BoardName "$_->{board}"\n); - print G qq( Driver "$_->{driver}"\n); - print G "#" if $_->{memory} && !$_->{flags}{needVideoRam}; - print G " VideoRam $_->{memory}\n" if $_->{memory}; - print G map { " $_\n" } @{$_->{lines} || []}; - print G qq( Ramdac "$_->{ramdac}"\n) if $_->{ramdac}; - print G qq( Dacspeed "$_->{dacspeed}"\n) if $_->{dacspeed}; - if ($_->{clockchip}) { - print G qq( Clockchip "$_->{clockchip}"\n); - } else { - print G " # Clock lines\n"; - print G " Clocks $_\n" foreach (@{$_->{clocklines}}); - } - print G qq( - - # Uncomment following option if you see a big white block - # instead of the cursor! - # Option "sw_cursor" - -); - print G $p->('options'); #- keep $O for these! - print G $p->('options_xf4'); #- keep $O for these! - print G qq( Screen $_->{screen}\n) if defined $_->{screen}; - print G qq( BusID "$_->{busid}"\n) if $_->{busid}; - print G "EndSection\n\n\n"; - } - - #- Write Screen sections. - print F $screensection_text1, "\n"; - print G $screensection_text1, "\n"; - - my $subscreen = sub { - my ($f, $server, $defdepth, $depths) = @_; - print $f " DefaultColorDepth $defdepth\n" if $defdepth; - - foreach (ikeys(%$depths)) { - my $m = $server ne "fbdev" ? join(" ", map { qq("$_->[0]x$_->[1]") } @{$depths->{$_}}) : qq("default"); #-" - print $f qq( Subsection "Display"\n); - print $f qq( Depth $_\n) if $_; - print $f qq( Modes $m\n); - print $f qq( ViewPort 0 0\n); - print $f qq( EndSubsection\n); - } - print $f "EndSection\n"; - }; - - my $screen = sub { - my ($server, $defdepth, $device, $depths) = @_; - print F qq( -Section "Screen" - Driver "$server" - Device "$device" - Monitor "$o->{monitor}{type}" -); #-" - $subscreen->(*F, $server, $defdepth, $depths); - }; - - #- SVGA screen section. - print F qq( -# The Colour SVGA server -); - - if (member($O->{server}, @svgaservers)) { - &$screen("svga", $o->{default_depth}, $O->{type}, $O->{depth}); - } else { - &$screen("svga", '', "Generic VGA", { 8 => [[ 320, 200 ]] }); - } - - &$screen("vga16", '', - (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"), - { '' => [[ 640, 480 ], [ 800, 600 ]]}); - - &$screen("vga2", '', - (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"), - { '' => [[ 640, 480 ], [ 800, 600 ]]}); - - &$screen("accel", $o->{default_depth}, $O->{type}, $O->{depth}); - - &$screen("fbdev", $o->{default_depth}, $O->{type}, $O->{depth}); - - print G qq( -Section "Screen" - Identifier "screen1" - Device "$O->{type}" - Monitor "$o->{monitor}{type}" -); - #- bpp 32 not handled by XF4 - $subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth}); - foreach (2..@{$O->{cards} || []}) { - my $device = $O->{cards}[$_ - 1]{type}; - print G qq( -Section "Screen" - Identifier "screen$_" - Device "$device" - Monitor "monitor$_" -); - #- bpp 32 not handled by XF4 - $subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth}); - } - - print G qq( - -Section "ServerLayout" - Identifier "layout1" - Screen "screen1" -); - foreach (2..@{$O->{cards} || []}) { - my ($curr, $prev) = ($_, $_ - 1); - print G qq( Screen "screen$curr" RightOf "screen$prev"\n); - } - print G '#' if defined $O->{Xinerama} && !$O->{Xinerama}; - print G qq( Option "Xinerama" "on"\n) if defined $O->{Xinerama}; - - print G ' - InputDevice "Mouse1" "CorePointer" -'; - $o->{mouse}{auxmouse} and print G ' - InputDevice "Mouse2" "SendCoreEvents" -'; - foreach (1..@{$o->{wacom}}) { - print G qq( - InputDevice "Stylus$_" "AlwaysCore" - InputDevice "Eraser$_" "AlwaysCore" - InputDevice "Cursor$_" "AlwaysCore" -); - } - print G ' - InputDevice "Keyboard1" "CoreKeyboard" -EndSection -'; #-" - - close F; - close G; -} - -sub XF86check_link { - my ($ext) = @_; - - my $f = "$prefix/etc/X11/XF86Config$ext"; - touch($f); - - my $l = "$prefix/usr/X11R6/lib/X11/XF86Config$ext"; - - if (-e $l && (stat($f))[1] != (stat($l))[1]) { #- compare the inode, must be the sames - -e $l and unlink($l) || die "can't remove bad $l"; - symlinkf "../../../../etc/X11/XF86Config$ext", $l; - } -} - -sub info { - my ($o) = @_; - my $info; - - $info .= _("Keyboard layout: %s\n", $o->{keyboard}{xkb_keymap}); - $info .= _("Mouse type: %s\n", $o->{mouse}{XMOUSETYPE}); - $info .= _("Mouse device: %s\n", $o->{mouse}{device}) if $::expert; - $info .= _("Monitor: %s\n", $o->{monitor}{type}); - $info .= _("Monitor HorizSync: %s\n", $o->{monitor}{hsyncrange}) if $::expert; - $info .= _("Monitor VertRefresh: %s\n", $o->{monitor}{vsyncrange}) if $::expert; - $info .= _("Graphic card: %s\n", $o->{card}{type}); - $info .= _("Graphic memory: %s kB\n", $o->{card}{memory}) if $o->{card}{memory}; - if ($o->{default_depth} and my $depth = $o->{card}{depth}{$o->{default_depth}}) { - $info .= _("Color depth: %s\n", translate($depths{$o->{default_depth}})); - $info .= _("Resolution: %s\n", join "x", @{$depth->[0]}) if $depth && !is_empty_array_ref($depth->[0]); - } - $info .= _("XFree86 server: %s\n", $o->{card}{server}) if $o->{card}{server}; - $info .= _("XFree86 driver: %s\n", $o->{card}{driver}) if $o->{card}{driver}; - $info; -} - -sub show_info { - my ($o) = @_; - $in->ask_warn('', info($o)); -} - -#- Program entry point. -sub main { - ($prefix, my $o, $in, $do_pkgs, my $cardOptions) = @_; - $o ||= {}; - - XF86check_link(''); - XF86check_link('-4'); - - { - my $w = $in->wait_message('', _("Preparing X-Window configuration"), 1); - - $o->{card} = cardConfiguration($o->{card}, $::noauto, $cardOptions); - - $o->{monitor} = monitorConfiguration($o->{monitor}, $o->{card}{server} eq 'FBDev'); - } - my $ok = resolutionsConfiguration($o, $::auto); - - $ok &&= testFinalConfig($o, $::auto, $o->{skiptest}, $::auto); - - my $quit; - until ($ok || $quit) { - ref($in) =~ /discard/ and die "automatic X configuration failed, ensure you give hsyncrange and vsyncrange with non-DDC aware videocards/monitors"; - - $in->set_help('configureXmain') unless $::isStandalone; - - my $f; - $in->ask_from_( - { - title => 'XFdrake', - messages => _("What do you want to do?"), - cancel => '', - }, [ - { format => sub { $_[0][0] }, val => \$f, - list => [ - [ _("Change Monitor") => sub { $o->{monitor} = monitorConfiguration() } ], - [ _("Change Graphic card") => sub { $o->{card} = cardConfiguration('', 'noauto', $cardOptions) } ], - if_($::expert, - [ _("Change Server options") => sub { optionsConfiguration($o) } ]), - [ _("Change Resolution") => sub { resolutionsConfiguration($o) } ], - [ _("Show information") => sub { show_info($o) } ], - [ _("Test again") => sub { $ok = testFinalConfig($o, 1) } ], - [ _("Quit") => sub { $quit = 1 } ], - ], - } - ]); - $f->[1]->(); - $in->kill; - } - if (!$ok) { - $ok = $in->ask_yesorno('', _("Keep the changes? -Current configuration is: - -%s", info($o))); - } - if ($ok) { - unless ($::testing) { - my $f = "$prefix/etc/X11/XF86Config"; - if (-e "$f.test") { - rename $f, "$f.old" or die "unable to make a backup of XF86Config"; - rename "$f-4", "$f-4.old"; - rename "$f.test", $f; - rename "$f.test-4", "$f-4"; - if ($o->{card}{server} !~ /Xpmac/) { - symlinkf "../..$o->{card}{prog}", "$prefix/etc/X11/X"; - } - } - } - - if ($::isStandalone && $0 =~ /Xdrakres/) { - my $found; - foreach (@window_managers) { - if (`pidof "$_"` > 0) { - if ($in->ask_okcancel('', _("Please relog into %s to activate the changes", ucfirst $_), 1)) { - fork and $in->exit; - system("kwmcom logout") if /kwm/; - system("dcop kdesktop default logout") if /kwin/; - system("save-session --kill") if /gnome-session/; - system("killall -QUIT icewm") if /icewm/; - - open STDIN, "</dev/zero"; - open STDOUT, ">/dev/null"; - open STDERR, ">&STDERR"; - c::setsid(); - exec qw(perl -e), q{ - my $wm = shift; - for (my $nb = 30; $nb && `pidof "$wm"` > 0; $nb--) { sleep 1 } - system("killall X ; killall -15 xdm gdm kdm prefdm") unless `pidof "$wm"` > 0; - }, $_; - } - $found = 1; last; - } - } - $in->ask_warn('', _("Please log out and then use Ctrl-Alt-BackSpace")) unless $found; - } else { - $in->set_help('configureXxdm') unless $::isStandalone; - my $run = exists $o->{xdm} ? $o->{xdm} : $::auto || $in->ask_yesorno(_("X at startup"), -_("I can set up your computer to automatically start X upon booting. -Would you like X to start when you reboot?"), 1); - any::runlevel($prefix, $run ? 5 : 3) unless $::testing; - } - } -} - -1; |