1 files changed, 3 insertions, 0 deletions
diff --git a/perl-install/NEWS b/perl-install/NEWS
index 289c97e3d..c2e5316e4 100644
--- a/perl-install/NEWS
+++ b/perl-install/NEWS
@@ -3,6 +3,9 @@
 - harddrake:
   o display info about cores
   o do not display 2 decades old CPU bugs
+- detect_devices:
+  o fix merging PCI devices info from sysfs which resulted in
+    ill-informed devices matching (#57711)
 
 Version 13.11 - 10 February 2010
 
diff --git a/.cvsignore b/.cvsignore
deleted file mode 100644
index 2a8035f11..000000000
--- a/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-docs
-images
-unused
-drakxtools.tar.bz2
-isolinux
diff --git a/Makefile b/Makefile
deleted file mode 100644
index cb6aeefdd..000000000
--- a/Makefile
+++ /dev/null
@@ -1,91 +0,0 @@
-ROOTDEST = /export
-
-DIRS = tools kernel mdk-stage1 perl-install rescue
-
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-.PHONY: dirs install
-
-install: dirs images rescue install_only
-
-dirs:
-	@for n in $(DIRS); do $(MAKE) -C $$n all || exit 1 ; done
-
-images:
-	./make_boot_img
-
-tar: clean
-	rpm -qa > needed_rpms.lst
-	cd .. ; tar cfj gi.tar.bz2 gi
-	rm needed_rpms.lst
-
-install_only:
-	for i in images misc Mandrake Mandrake/base Mandrake/share; do install -d $(ROOTDEST)/$$i ; done
-    ifneq (ppc,$(ARCH))
-	cp -f images/* $(ROOTDEST)/images
-    endif
-    ifeq (alpha,$(ARCH))
-	cp -f images/* $(ROOTDEST)/boot
-	cp -f vmlinux.gz $(ROOTDEST)/boot/instboot.gz
-	make -C tools/$(ARCH)/cd install ROOTDEST=$(ROOTDEST)
-    endif
-	cd $(ROOTDEST)/images; rm -rf alternatives 
-	if [ `ls $(ROOTDEST)/images/*.img-* 2>/dev/null | wc -l` -gt 0 ]; then	\
-	  cd $(ROOTDEST)/images; mkdir alternatives; cd alternatives; mv ../*.img-* .; md5sum *.img-* > MD5SUM; \
-	fi
-	cd $(ROOTDEST)/images; md5sum *.{img,iso}* > MD5SUM
-
-    ifeq (i386,$(ARCH))
-	rm -rf $(ROOTDEST)/isolinux
-	cp -af isolinux $(ROOTDEST)
-    endif
-
-    ifeq (x86_64,$(ARCH))
-	rm -rf $(ROOTDEST)/isolinux
-	cp -af isolinux $(ROOTDEST)
-    endif
-
-	make -C perl-install full_stage2
-	make -C perl-install/share/advertising install
-	make -C rescue install
-
-clean:
-	rm -rf images all.modules all.modules64
-	for i in $(DIRS); do make -C $$i clean; done
-	find . -name "*~" -o -name ".#*" | xargs rm -f
-
-check:
-	@badrights=`find $(ROOTDEST)/Mandrake/mdkinst | perl -lne 'print if !((stat)[2] & 4)'`; [ -z "$$badrights" ] || { echo "bad rights for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$badrights" ; echo "bad rights for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	@missing_kb=`find -name "Entries" | xargs perl -F/ -alne 'print $$ARGV =~ m|(.*)/CVS|, "/$$F[1]" if $$F[1] =~ /\.(png|gif|bmp|xcf|gz|bz2|tar|rdz|so|a|o|mar|img|exe)$$/ && $$F[4] ne "-kb"'` ; [ -z "$$missing_kb" ] || { echo "missing -kb in CVS for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing_kb" ; echo "missing -kb in CVS for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	$(MAKE) -C perl-install check
-
-upload: 
-	$(MAKE) clean
-
-#	# done before make install to increment ChangeLog version
-	tools/addchangelog.pl tools/cvslog2changelog.pl | tools/mailchangelog.pl &
-
-	$(MAKE) install
-	$(MAKE) check
-	$(MAKE) upload_only
-
-upload_only:
-	function upload() { rsync -qSavz --verbose --exclude '*~' -e ssh --delete $(ROOTDEST)/$$1/$$2 mandrake@ken:/c/cooker/$$1; } ;\
-	upload Mandrake/mdkinst '' ;\
-	upload Mandrake/base 'compssUsers*' ;\
-	upload Mandrake/base rpmsrate ;\
-	upload Mandrake/base '*_stage2.bz2' ;\
-	upload Mandrake/share/advertising '' ;\
-	upload misc gendistrib ;\
-	upload misc make_mdkinst_stage2 ;\
-	upload misc packdrake ;\
-	upload misc packdrake.pm ;\
-	upload misc auto ;\
-	upload images MD5SUM ;\
-	upload images '*.img*' ;\
-	upload images '*.iso*' ;\
-	upload images/alternatives '' ;\
-	upload isolinux '' ;\
-	echo
diff --git a/advanced.msg.xml b/advanced.msg.xml
deleted file mode 100644
index f49bb7fe8..000000000
--- a/advanced.msg.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<document>
-The following install types may be used instead of previously notified :
- o  <white>vgahi</white> for high resolution graphical installation.
- o  <white>vga16</white> for 640x480 in 16 colors graphical installation.
-
-The following options may be added on the command line :
- o  <white>readonly=1</white> to disable editing disk partitions.
- o  <white>display=ackbar:0</white> to export display to <blue>ackbar</blue> machine screen 0 during
-    installation.
- o  <white>noauto</white> to disable automatic detection (generally used with <white>expert</white>).
- o  <white>security=n</white> to set security level to value <blue>n</blue>.
- o  <white>updatemodules</white> to use the special update floppy containing modules updates.
- o  <white>patch</white> to use a patch from the floppy (file named <blue>patch.pl</blue>).
- o  <white>auto_install=floppy</white> to enable auto_install using <blue>auto_inst.cfg</blue> file on the
-    floppy.
- o  <white>memtest</white> to test your computer RAM for faulty memory modules.
-</document>
diff --git a/docs/.cvsignore b/docs/.cvsignore
deleted file mode 100644
index a0593a470..000000000
--- a/docs/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pictures
diff --git a/docs/9.0_errata.txt b/docs/9.0_errata.txt
deleted file mode 100644
index 4fec8885c..000000000
--- a/docs/9.0_errata.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-# This file contains all the bugs/glitches/inconsistencies shipped in
-# 9.0 (Dolphin) Mandrake Linux Release.
-
-# Feel free to add your entry and if possible the fixes and status of
-# the errata.
-
- o Drakxtools:
-   ==========  
-
-   widget libraries:
-
-    In both XFdrake and printerdrake pop up small, empty, gray windows when 
-    clicking in the main menu. STATUS: Not fixed.
-
-    Scroll bars and widget sizes often not correct (visible primarily in the
-    printer options step of the "Add printer" wizard of printerdrake. STATUS:
-    Not fixed.
-   
-   harddrake:
-
-   logdrake:
-    IS: Send the alert mail when service is stopped but the mail
-	      is empty.
-    SHOULD BE: incorporate a text on which service is stopped.
-    Status: not fixed. 
-
- o Drakconf:
-   =========
-   IS: locale nl_NL, sl and zh_CN prevent drakconf from starting with
-   a "cannot call set_active on undefined values" error.
-
-   SHOULD BE: work well in all locales.
-   
-   a workaround has been comitted
-
- o Drakfont:
-   =========
-
-   drakfont get stopped in stat64("/mnt/nt/winnt/fonts/8514oem.fon",
-   ...) on ntfs partitions.
-   there's a bug in ntfs.o fs module of the kernel
-
- o Install: 
-   ========
- 
- o urpmi:
-   ======
-
-   "urpmi mplayer" shows a list of libraries it needs and asks whether
-   to install all this, after saying "y", it says that all these
-   packages are missing and fails (I have shown it to Fran�ois and he
-   says that is a bug with the "contribs". He had to regenerate the
-   hdlists somehow. STATUS: Not fixed.
-
- o XFree 4.2.x:
-   ============
-
-   Touchpad mouse on my Asus S8600 notebook. Worked out-of-the-box
-   with Mandrake 8.2, but in 9.0 I cannot do any dragging operation
-   with the PS/2-"Standard" mouse setting. I switched to "Glidepoint"
-   with mousedrake and then dragging works, but the emulation of the
-   third button by pressing both buttons not. Adding the lines
-
-      Option "Emulate3Buttons"
-      Option "Emulate3Timeout" "50"
-
-   to the mouse section of /etc/X11/XF86Config-4 manually fixes the
-   middle-button problem. STATUS: Not fixed.
-
-
-
-   Sometimes, XFree86 can cause sound glitches because of intensive
-   pci bus usage.
-   Adding the line
-
-      Option "PciRetry" "true"
-
-   to the "Device" section /etc/X11/XF86Config-4 fixes these boxes.
-
-
-   I810 driver is bogus: when Xrender extension is in use (antialiased
-   fonts), X11 may crash upon vt switch.
-   is fixed in devel branch of cvs
-
-
- o Printer drivers:
-   ================
-
-   "Best Grayscale" mode of HP DeskJet 6xx and Apollo printers does
-   not work. STATUS: Fixed on linuxprinting.org, needs to be packaged
-   in "printer-drivers".
-
-o kernel:
-  =======
-
-  Sometimes reboot stops on "illegal seek" message (having /usr on /
-  fs fix it)
-
-  Sometimes process get blocked in D-state on ntfs partitions (see
-  drakfont)
-
-  i810_audio mistakely say to modules.pm through modules.*map it
-  handles nforces whereas it lacks some workaround nvidia and alsa
-  uses.
-  workaround: perl-install/patch/patch-nforce.pl
-
-  snd-via686 is said to produce background noise since alsa-0.9.0rc3
-  workaround: switch to via82cxxx_audio (oss driver) through draksound
diff --git a/docs/9.1_errata.txt b/docs/9.1_errata.txt
deleted file mode 100644
index fa73c200e..000000000
--- a/docs/9.1_errata.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file contains all the bugs/glitches/inconsistencies shipped in
-# 9.1 (Bamboo) Mandrake Linux Release.
-
-# Feel free to add your entry and if possible the fixes and status of
-# the errata.
-
-
- o DrakConf:
-   =========
-
-   - #2439: menudrake failled to run for users other than root and
-      xserver owner
-
-   - #3415: do not kill "explicitely non embeddable" processes when
-     killing embedded tools
-
-   both fixed in 9.1-12mdk
-
-
-
- o DrakxTools:
-   ===========
-   - drakconnect:
-     o ltmodem support is missing from mdk9.1 [added in hp release]
-     o various other fixes came into mdk4hp release
-
-   - explanations: most common ones are not logged because of a
-     standalone.pm vs common.pm methods overloading bug [not yet
-     fixed]
-
-   - harddrake-ui:
-     o menu entry starts logdrake instead of harddrake's gui [fixed in
-       cvs]
-     o status bar is not cleared on config tool exit [fixed in cvs]
-     o title bar miss some spaces in french locale [fixed in cvs]
-
-   - harddrake service: 5 second timeout was too short so it was
-     increased up to 25 seconds [in hp release]
-
-   - localedrake/drakx: legal problem with rpc vs hong-kong||taiwan
-     [fixed in hp release]
-
-
-
- o Kernel:
-   =======
-
-   - ntfs driver has a hang, additionally also causing 100% cpu usage
-     if either the size of the ntfs filesystem or the number of MFT
-     entries fell to a certain range and statfs() system call was
-     invoked by an application (e.g. df, gnome system monitor, etc).
-     see #3353
-
-     it got fixed quickly but unfortunately too late for us
-
-     the probability one hits this bug is 0.2% or every 512th users.
-
-     updated ntfs driver (2.1.2a) is at the usual place,
-
-	http://linux-ntfs.sourceforge.net/
-
-        or more precisely,
-
-	http://sourceforge.net/project/showfiles.php?group_id=13956
-
diff --git a/docs/BUGS b/docs/BUGS
deleted file mode 100644
index 1d154fcf1..000000000
--- a/docs/BUGS
+++ /dev/null
@@ -1,10 +0,0 @@
-doInstallStep: if there's not enough room, error, but packages are marked installed :(
-
-when you click directly on setupFilesystems and you have scsi, you're fucked.
-Even if you go to setupSCSI, you won't be able to have partitions again.
-
-bug non reproductible:
-- /etc/passwd is empty after `root passwd' stage :(
-- reboot at the end of package installation with a lot of error messages from
-gtk about the progressbar
-
diff --git a/docs/COPYING b/docs/COPYING
deleted file mode 100644
index 60549be51..000000000
--- a/docs/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/docs/HACKING b/docs/HACKING
deleted file mode 100644
index d7fa2bad0..000000000
--- a/docs/HACKING
+++ /dev/null
@@ -1,143 +0,0 @@
--=-=--
-DrakX is a very big project, and it needs special setups to work.
-The purpose of this file is to explain how you can setup your box to make it
-compile and run.
--=-=--
-
-Beware, don't try this on a production machine with important data.
-
-
---------------------------------------------------------------------------
-Sources installation:
-
-First grab the gi.tar.bz2 archive and untar it in your home directory, for 
-example from DrakX-*.src.rpm on your Mandrake Linux distribution.
-
-Fix a few things:
-% find gi -name "*/CVS/root/*" | xargs perl -pi -e 's/prigaux/anoncvs/'
-
-Then, log yourself into the cvs:
-% export CVS_RSH=ssh
-% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-% cvs checkout gi
-� � � � (the passwd is: 'cvs')
-
-And update the gi package:
-% cvs update -P -d gi
-
-
---------------------------------------------------------------------------
-Preparing the compilation process:
-
-(1) target directory
-
-Create a top level directory called /export and give write permissions to 
-the user/group that will be compiling DrakX. �It is also suggested that you 
-copy a recent Mandrake Linux CD in there. (You don't have to put have all 
-the RPMS...) ; you'll need roughly 1.5 Gbytes for a full install. (It is 
-possible to not have a copy of Mandrake Linux there, if all you desire is to 
-compile gi)
-
-
-(2) support directories
-
-You will need to create a top level /RPMS directory. �This directory needs 
-to be populated with the following RPMS:
-locales-ja locales-ko locales-zh
-
-GI needs to be informed about which kernel(s) is/are to be used.
-Most of the time, no manual install is needed. Just be sure to
-have the BOOT kernel(s) in /RPMS, and typing make later on will
-extract the package(s) and build stuff from it.
-
-FYI, for each kernel, directories will be populated as follows:
-
-gi/kernel/all.kernels/2.6.0
-        containing all files from the said kernel RPM package
-
-gi/kernel/all.modules/2.6.0
-        containing all modules, and special files containing
-        modules for stage1 (*.mar)
-
-gi/kernel/all.modules/
-        containing a special file containing modules for stage1
-        (*.cz*)
-
-Note: the modules must not be in compressed form (*.gz *.bz2 etc)
-
-
-(3) required rpm packages
-
-You need quite a number of rpm packages installed on your system
-to build gi properly. Roughly:
-
-emacs gcc make glibc-devel glibc-static-devel perl-devel XFree86
-XFree86-FBDev XFree86-VGA16 XFree86-devel libglib-devel
-libgtk+-devel perl-GTK ldetect ldetect-devel ldetect-lst
-ldetect-lst-devel libslang-devel libnewt-devel e2fsprogs
-libext2fs2-devel dosfstools rpm-devel rpmtools libbzip2_1
-libbzip2_1-devel libncurses5 libncurses5-devel setserial telnet
-parted raidtools pciutils mt-st gpart reiserfsprogs jfsprogs
-xfsprogs extipl pcmcia-cs gettext perl-Gtk2 perl-Glib perl-XML-Parser ash imlib
-fb2png ntfsprogs lm_sensors galaxy-gnome perl-PerlIO-gzip brltty
-lvm2 mkcd perl-URPM glibc-i18ndata
-
-You may need a few others I forgot to mention. If the compilation fails, try 
-to understand the message and install any necessary remaining package.
-
-
-(4)
-
-NEVER build or run Drakx as root. �Install sudo and setup the following 
-permissions in /etc/sudoers:
-
-user ALL=(root)
-NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip,NOPASSWD:/bin/mknod
-
-
-(5)
-
-pray
-
-[gc@obiwan ~/cvs/gi] make
-
-
----------------------------------------------------------------------------
-The comments written with #- are automatically stripped out at install.
-
-
----------------------------------------------------------------------------
-testing all:
-
-� go to the perl-install directory and execute ./install2 --test
-
-� NEVER execute DrakX as root! You might need to allow all users
-� to read the block devices of your hard-disks, though (chmod a+w
-� /dev/hda* for example).
-
-
-
-Here is how I (dams) made it work on my computer.
--------------------------------------------------
-
-- get the sources
-- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines
-- cd path/to/gi
-- make
-- mkdir /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/step-* /usr/share
-- ln -s path/to/gi/perl-install/share/help.xpm /usr/share
-- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts
-- have a cd architecture linked on /export
-- ln -s /export /tmp/rhimage
-- export PERL_INSTALL_TEST=1
-- cd path/to/gi/perl-install
-- gendistrib --noclean --distrib /export
-- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user
-
-
-
-address all bugreports to dave@null.com
-
-info has been added by sunny@opencurve.org
diff --git a/docs/Partition-ends-after-end-of-disk.txt b/docs/Partition-ends-after-end-of-disk.txt
deleted file mode 100644
index 3da57d561..000000000
--- a/docs/Partition-ends-after-end-of-disk.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-        Cylinder/Head/Size Hell Is Not Over 
-
-            pixel@mandrakesoft.com 
-         $Date$
-
-
-Nowadays, you can boot Linux without ever relying on CHS
-(Cylinder/Head/Size):
-
-- CHS information on partition table is obsolete and not used anymore.
-It was causing the 1024th cylinder limitation:
-  - disallowing partitions above 8GiG. Problem overcome using 28bits Linear
-  Block Addressing (LBA) in partition table.
-  - disallowing to boot on partition above 8GiG (due to int13 limitation used
-  in bootloaders). Problem overcome using int13 extensions (EDD)
-
-Logical CHS (Cylinder/Head/Size) and physical CHS are not related anymore.
-Especially the size of a hard drive is not a multiple of the number of
-Cylinders.
-
-
-The problem is that many tools still rely somewhat heavily on CHS information.
-- most tools adjust partitions on cylinder boundary
-- some tools compute the size of the disk based on CHS (eg: fdisk)
-
-
-Resulting problems in various tools:
-
-- last partition not cylinder boundary adjusted, and overrun CHS computed size
-  - fdisk
-    > Total allocated sectors %d greater than the maximum %d
-  - cfdisk (need confirmation)
-    > FATAL ERROR: Bad primary partition %d: Partition ends after end-of-disk
-    or
-    > FATAL ERROR: Bad logical partition %d: Partition ends after end-of-disk
-  - Partition Magic (version?)
-    > Error #109: Partition ends after end of disk
-  - Windows <= 98se, Windows Me
-    (doesn't like it, what error message?)
-
-  Tools handling it correctly:
-  - parted and so diskdruid in RedHat >= 7.2 (or is it 7.x?)
-  - diskdrake >= Mandrake 8.2
-  - Windows XP (need confirmation)
-
-  Tools using the full size of the disk, and so causing pbs with fdisk/cfdisk/...:
-  - diskdrake == Mandrake 8.2
-
-- disagreement between CHS and linear address
-  - parted
-    > "Warning: Unable to align partition properly.  This probably means that
-    > another partitioning tool generated an
-    > incorrect partition table, because it didn't have the correct BIOS
-    > geometry.  It is safe to ignore,but
-    > ignoring may cause (fixable) problems with some boot loaders.
-    > Ignore Cancel ? C
-  - lilo
-    > Warning: Kernel & BIOS return differing head/sector geometries for device 0x80
-    >     Kernel: 38792 cylinders, 16 heads, 63 sectors
-    >       BIOS: 1023 cylinders, 255 heads, 63 sectors
-    > Device 0x2100: Inconsistent partition table, 2nd entry
-    >   CHS address in PT:  48:0:1  -->  LBA (771120)
-    >   LBA address in PT:  48384  -->  CHS (3:3:1)
-    > The partition table is *NOT* being adjusted.
-
-
diff --git a/docs/README b/docs/README
deleted file mode 100644
index b298f3603..000000000
--- a/docs/README
+++ /dev/null
@@ -1,396 +0,0 @@
-Well here is a little description of what DrakX needs to work in comparison
-to the RH newt install.
-
-********************************************************************************
-* CVS **************************************************************************
-********************************************************************************
-Like all good free software, DrakX is in CVS :)
-
-You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi
-
-or via
-
-export CVS_RSH=ssh
-export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-cvs checkout gi
- (enter password 'cvs')
-
-
-This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com)
-
-Alas, all is not in CVS, a lot of things come from rpm packages which you must
-install.
-
-Please note that redoing *all* the stuff is not for the faint of heart. I myself
-sometimes wonder what the whole make does :-%
-Instead, changing some .pm files is quite easy (nice interpreted language)
-
-********************************************************************************
-* Making your custom install ***************************************************
-********************************************************************************
-If you have your own rpms you want to add, or make your own updated cdrom, you
-just have to issue:
-
-% gendistrib --noclean --distrib <DIRS>
-
-Where <DIRS> is the root of all the media that the install will see, this first
-one is the main one :
-
-(1) network or 1-cdrom installs
-	DIRS == the root directory of the Distribution
-
-(2) multi-cdrom install
-	DIRS == the root directories of all the media that the install will see
-
-``gendistrib'' will scan the file Mandrake/base/hdlists in the main root
-directory (the first one in DIRS) to search for all media used. Typically you
-use Mandrake/RPMS* for RPM packages repository.
-For multi-cd, please use Mandrake/RPMS or Mandrake/RPMS1, Mandrake/RPMS2, etc.
-For one CD or a network/hd volume, please use Mandrake/RPMS.
-
-Optionnally, you can modify ``Mandrake/base/rpmsrate''; this file manages
-the relative importance of the files, and thus their installation or not.
-
-Also, mdkinst_stage2.gz must be remade if you modify files in Mandrake/mdkinst.
-See below for information about these files.
-
-********************************************************************************
-* FILES ************************************************************************
-********************************************************************************
-First here are the different things needed :
-
-Mandrake/base/hdlists
-	description of the available install media.
-	format is one line for one medium as
-		<hdlist_name> <rpms_directory> <description>
-	<hdlist_name> should be match regexp /hdlist\S*.cz2?/
-	for example (two cd install) you get
-		hdlist1.cz	Mandrake/RPMS1	Boot CD
-		hdlist2.cz	Mandrake/RPMS2	Extension CD
-
-Mandrake/base/hdlist*.cz
-	table of rpm's headers, referred by ``hdlists''
-	their contents can be listed using ``packdrake -l <hdlist_file>'' or
-	or ``parsehdlist <hdlist_file>''.
-	! Need to be remade when Mandrake/RPMS* changes (with ``gendistrib'') !
-
-Mandrake/base/depslist.ordered
-	for each packages, tell which package it depends on. Also contains the
-	size for some (obscure) bloody reasons.
-	! Need to be remade when Mandrake/RPMS* changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/compssUsers
-
-Mandrake/base/rpmsrate
-	ranks and classify packages, so that the installer will know which
-        ones to install. format is :
-		<intern_group>
-			<level> <packages>
-	where <intern_group> is a symbolic name used in Mandrake/base/compssUsers* files,
-	and <level> defines importance level as described below :
-		5	must have
-		4	important
-		3	very nice
-		2	nice
-		1	maybe
-	by default (for non expert), group selects packages for level 4 (important)
-	and 5 (must have). export mode add 3 (very nice) level. other level (below 2)
-	can only be selected using individual package selection.
-
-Mandrake/mdkinst
-	live system used on certain installs. See ``Ramdisk or not'' below for
-	more.
-
-Mandrake/base/mdkinst_stage2.bz2
-	for the ramdisk. live sytem in ext2 filesystem bzipped2.
-	generated from Mandrake/mdkinst tree using misc/make_mdkinst_stage2
-	See ``Ramdisk or not'' below for more.
-
-Mandrake/base/rescue_stage2.bz2
-	rescue ramdisk. live sytem in ext2 filesystem bzipped2.
-	this is the ramdisk loaded when typing rescue on boot prompt.
-	there is no live system available, only the ramdisk is used.
-
-images/*.img
-	floppy boot images to use with DrakX. Use:
-	- cdrom.img for cdrom install
-	- network.img + network_drivers.img for ftp/nfs install (non-pcmcia devices)
-	- hd_grub.img for hard-disk install (see http://qa.mandrakesoft.com/hd_grub.cgi)
-	- pcmcia.img for pcmcia install (see ``PCMCIA install'' below for more)
-
-images/boot.iso
-	iso image to burn enabling any install (cdrom/hd/nfs/ftp)
-
-********************************************************************************
-* logs *************************************************************************
-********************************************************************************
-During install, a lot of interesting stuff can be found in different places:
-in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2
-from the X install.
-- alt-F1: the stdout of the install. Not very interesting stuff
-- alt-F2: simple shell. Quite a lot of commands are available but as they are
-written in perl (for space), they do not handle the very same options as normal.
-After install, you can do ``chroot /mnt'' to see your system just like after
-rebooting. ``rpm -qa'' works for example.
-- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are
-not interesting.
-- alt-F4: kernel's place. aka the output of dmesg.
-- alt-F7: the graphical install lives there
-
-- command "bug" puts on floppy lots of interesting stuff.
-- /tmp/stage1.log: same as alt-F3 part when stage1 run (e.g. actions
-  before graphical install really begins)
-- /tmp/ddebug.log: (nearly the) same as latter alt-F3 part
-- /tmp/syslog: same as alt-F4
-- /mnt/root/drakx/ddebug.log: at the end of each step, DrakX tries to backup
-  /tmp/ddebug.log to /mnt/root/drakx. Available only after mounting of /.
-- /mnt/root/drakx/install.log: the log of the installation (or upgrade) of the rpms
-(just like rpm's /mnt/tmp/(install|upgrade).log)
-- /mnt/root/drakx/auto_inst.cfg.pl: a kickstart file generated at the end of each
-step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully
-you know about kickstart. ``defcfg'' is a way to customize the default values in
-install. For example, French can be the default language with a qwerty keyboard,
-the auto-partitionning partitions can be changed, the default user class can be
-set to developer (!)...
-
-********************************************************************************
-* po translation files *********************************************************
-********************************************************************************
-DrakX uses .po files for its translation. A script takes the different
-strings out of the .pm files. It generates the DrakX.pot file which contains
-all the english strings to translate.
-To add a new language, you just have to add it to lang.pm (if it's not there
-already) and put the .po in the perl-install/po directory (see ``Ramdisk or
-not'' to know if you have to regenerate the mdkinst_stage2.gz)
-
-********************************************************************************
-* PCMCIA install ***************************************************************
-********************************************************************************
-If the media you use to install is a pcmcia device, use the pcmcia boot disk.
-
-********************************************************************************
-* Ramdisk or not ***************************************************************
-********************************************************************************
-The DrakX install is much bigger than the newt one. So the ramdisk which was
-used is getting big, and costs a lot in memory 
-(eg: the mdkinst_stage2 is 14MB - 23/09/99)
-(update! now size is 21MB - 24/01/01)
-(update! now size is 19MB - 26/04/01)
-
-|       | newt    | DrakX
-|-------+---------+----------------------------------------------------------
-| nfs   | live    | live
-| ftp   | ramdisk | ramdisk
-| http  | ramdisk | ramdisk
-| hd    | ramdisk | live if Mandrake/mdkinst/usr/bin/runinstall2 is a link,
-|       |         |   ramdisk otherwise
-| cdrom | ramdisk | live if memory < 52MB, ramdisk otherwise
-
-Where ramdisk is needed, if detected memory is below the limit allowed for
-ramdisk (maintained in file gi/mdk-stage1/config-stage1.h; currently 52 Mb),
-a failure dialog will be printed explaining that there is not enough memory
-to perform the installation.
-
-When i say live, it means that the stage1 will *mount* the
-Mandrake/mdkinst and use it that way.
-
-The ramdisk is used in place of the live in some cases. This ramdisk is filled
-with mdkinst_stage2.gz
-
-For cdrom install, the ramdisk is used to speed up things (access time is quite
-high on cdrom drives)
-
-For pcmcia, it depends on the type of install.
-
-
-********************************************************************************
-* modules **********************************************************************
-********************************************************************************
-Modules can be found in at least 2 places:
-- in /modules/modules.mar
-- in /lib/modules.cz<KERNEL_VERSION_RELEASE>
-
-/modules/modules.mar is used in mdk-stage1. It contains only modules
-interesting for one kind of install. For example in an hd install, it
-contains scsi modules. For a network install, it contains network card
-modules. (To create, extract or view files in a ``mar'' archive, please
-use gi/mdk-stage1/mar/mar; this is basically an archive format meant to
-be minimalistic)
-
-/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used
-in stage2.
-
-
-To manually install a module during install, switch to console #2
-and type "modprobe <modulename>". The modprobe program is a perl
-wrapper around /usr/bin/insmod. It uses the dependencies found in
-/modules/modules.dep (stage1).
-
-/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the
-module out of /lib/modules.cz in /tmp. Then it calls insmod_.
-
-/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need
-to give it the complete path.
-
-********************************************************************************
-* Making screenshots ***********************************************************
-********************************************************************************
-1. easy solution: press "F2"!
-
-2. On a test machine, make a network install, switch to console (ctrl-alt-F2), enter:
-% xhost+
-then, on another computer:
-% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png
-
-********************************************************************************
-* Auto install *****************************************************************
-********************************************************************************
-A powerful auto-install system is available. It allows performing
-an install without any human interaction.
-
-To feed automatic parameters to the stage1 part (the textmode
-part - might not be necessary for you if you plan to do
-cdrom-based auto-installs, but mostly highly needed when doing
-network installs), please refer to ../mdk-stage1/doc/TECH-INFOS.
-
-About the stage2 part (the actual installer, at the time you're
-(usually) running in graphical mode), please refer to the nice
-documentation written by David Eastcott. Either install the
-package "drakx-autoinstall-doc" from contrib, or browse:
-
-http://members.shaw.ca/mandrake/drakx/9.0/HTML/
-
-The previous document will explain you how to setup the contents
-of the auto_inst.cfg file. Note that you have 3 alternatives for
-providing this file:
-- from a floppy disk; use "kickstart=floppy" as kernel parameter,
-  as explained in the document
-- from the installation volume itself; put the file in the
-  "Mandrake/base" directory of the installation volume; use
-  "kickstart" only, or "kickstart=filename" to specify another
-  filename than auto_inst.cfg
-- specified by the network; setup your DHCP server to provide the
-  "bootfile" parameter, this file will be used as the
-  "auto_inst.cfg" file; in this case you also need to provide the
-  "netauto" boot parameter
-
-In any case, if the specified file ends with -IP or -IP.pl, IP
-will be substituted by the IP address of the machine, when doing
-a network install. Might be useful so that you can control all
-your auto installs from your server.
-
-********************************************************************************
-* Miscellaneous ****************************************************************
-********************************************************************************
->  o Media access methods: nfs, ftp, http, hd, cdrom
->  o Stages: init, stage1, stage2
->    - What exactly each stage does
-
-init loads stage1
-stage1 loads stage2, from various medium type
-
-stage2 is too big to fit on a floppy, that's why stage1 exists
-
->    - How each stage relates to the various media access methods
-
-stage1 knows only how to access to the media is compiled for. It
-contains only the kernel modules needed for that media. For eg,
-the nfs/ftp/http stage1 (network.img floppy) doesn't contain scsi
-modules nor ide.
-
->    - How one stage terminates and another begins. i.e., How does
->      stage1 find, mount, and launch stage2?
-
-  /sbin/init just starts /sbin/stage1, and monitors its
-execution; it's here to cleanly umount the partitions when stage1
-or stage2 dies/finished
-
-  /sbin/stage1 takes care of mounting stage2 (in ramdisk if
-necessary) then it execs /usr/bin/runinstall2 (thus, stage2
-replaces stage1, and init then monitors stage2)
-
->  o Text and Graphic mode installers
->    - Architectural overview of each
-
-have a look at gi/docs/object_class.fig
-
-
-********************************************************************************
-* OEM **************************************************************************
-********************************************************************************
-> I am a system OEM in Bangalore,India selling systems bundled with
-> Mandrake Linux. The problem is that with every system I sell, I need to
-> install & configure the system which takes HOURS!. Can I do a diskcopy
-> instead?
-> 
-> Please Help. This is a major bottleneck for  me.
-
-many solutions:
-
-- make an install on drive hdb, then :
-      dd if=/dev/hdb of=/dev/hdc
-  but you should make sure the hardware is *REALLY* identical.
-
-- try the oem feature
-   3. - burn a cd out of *latest* cooker or 8.0 and above.
-      - boot on it telling "oem" to syslinux
-      !! it will destroy every data on the harddrive or
-         resize (or use free space) if *ONLY* one fat partition is defined !!
-      - you now have a very automated install matrix 
-      (duplicate it with "dd if=/dev/hdb of=/dev/hdc bs=1M count=730")
-
-    put the harddrive in the oem box, the user will now have an *very* automated
-    install, just asking the root password and user password, and some other
-    question according its hardware.
-
-   4. just like 3. but you may have to mount /cdrom after typing rescue on
-      syslinux prompt (oem script do it automatically if a automatic boot nfs
-      network has been done as server is known). under /cdrom may be anything
-      as long as it provides an installation tree of Mandrake Linux.
-      after that run oem script by typing "/etc/oem -f" for normal installation
-      or "/etc/oem -f server" for server installation (normal with server installed).
-
-   5. (just like 3. without burning a cd, doing the first part by hand)
-      have a look at the /etc/oem script on the rescue and do it by hand...
-
-
-cu Pixel, fpons.
-
-
-comments:
-1. maybe copy unnecessary things -> take too long
-   solution -> use bs=8k count=xxxx 
-2. kernel_reread can be found on the new rescue, source is also at end of this
-mail. This solution works with one partition. Can be easily enhanced to many
-primary partitions... For extended partitions, more complicated, but not much :)
-3. has just been added in latest cooker. It may still have some pb. The main
-current limitation is IDE only, though it can be fixed easily for special cases.
-
---------------------------------------------------------------------------------
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-
-void die(char *msg)
-{
-  perror(msg);
-  exit(1);
-}
-
-void kernel_read(char *dev)
-{
-  int fd;
-  if ((fd = open(dev, O_RDONLY)) == -1) die("can't open device");
-  ioctl(fd, BLKRRPART, 0);
-  close(fd);
-}
-
-int main(int argc, char **argv) 
-{
-  if (argc != 2) {
-    fprintf(stderr, "usage: kernel_read_part <hard drive device>\n");
-    exit(1);
-  }
-  kernel_read(argv[1]);
-}
diff --git a/docs/README.devel b/docs/README.devel
deleted file mode 100644
index 989946de9..000000000
--- a/docs/README.devel
+++ /dev/null
@@ -1,252 +0,0 @@
-Well here is a little description of how DrakX can be modified or extended.
-Please refer to README file for getting DrakX code source and to known more
-exactly how it works and what it can do.
-
-
-********************************************************************************
-* Execution of DrakX ***********************************************************
-********************************************************************************
-DrakX has originally be written by pixel in perl and C.
-entry point for stage2 is /usr/bin/runinstall2 which is typically a link to
-/usr/bin/install2 which simply load module install2.pm and execute
-install2::main with @ARGV.
-
-install2::main parse command line arguments, prepare installation, find the right
-install_interactive class (take a look at gi/docs/object_class.fig) according to
-command line, memory available and if the interactive chosen is initializing
-correctly, else it will try a less-demanding interactive object.
-Once done, $::o is set to this install & interactive object and main runs the
-various step of install2 defined in $o->{steps}, starting with $o->{steps}{first}
-and iterating with method install_any::getNextStep().
-while running step, it trap any errors that may arise and use perl exception to
-change step.
-
-********************************************************************************
-* DrakX modules descriptions ***************************************************
-********************************************************************************
-Here is a brief description of what each modules of DrakX is doing.
-
-install2: main module of DrakX as described above, main loop execution of DrakX.
-
-install_steps: generic installation module containing steps definition, all steps
-  should always be defined here as some methods may be used on automatic mode.
-  there is no interactivity available. typically are defined base operation for
-  configuring each step according to $o.
-
-install_steps_interactive: generic installation module with generic interative
-  methods. typically are found all interactive code of DrakX for each steps.
-
-install_steps_auto_install: implementation installation module without interactive
-  methods to match auto_install mode. this is the simplest as almost no method are
-  redefined (inherit module install_steps only, compared to other implementation
-  modules described below).
-
-install_steps_stdio: implementation installation module with interactive stdio
-  methods to match stdio mode. inherit modules install_steps_interactive and
-  interactive_stdio.
-
-install_steps_newt: implementation installation module with interactive newt
-  methods to match newt mode. inherit modules install_steps_interactive and
-  interactive_newt.
-
-install_steps_gtk: implementation installation module with interactive gtk
-  methods to match gtk mode. inherit modules install_steps_interactive and
-  interactive_gtk.
-
-install_any: contains various methods using generic interactive interface but
-  not used by standalone tools.
-
-install_gtk: contains various methods using gtk interface but not used by
-  standalone tools.
-
-interactive_stdio: implementation methods for interactivity in stdio mode.
-  inherit module interactive.
-
-interactive_newt: implementation methods for interactivity in newt mode.
-  inherit module interactive.
-
-interactive_gtk: implementation methods for interactivity in gtk mode.
-  inherit module interactive.
-
-my_gtk: basic gtk access methods.
-
-any: contains various methods using generic interactive interface. to compare
-  against install_any module as this one is available for standalone tools.
-
-class_discard: simple module that implement every methods undefined to return
-  nothing. this trick is used to ensure no undefined method can arise when using
-  code that reference interactive method which are not defined.
-
-common: contains very simple and very usefull (common) methods to do various task.
-  some methods inspired by functionnal language.
-
-c: contains wrapper to C definition of methods used by DrakX, use of C is necessary
-  for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree
-  interface.
-
-commands: implement some un*x commands, conflicting name with perl contains
-  trailing underscore (_). this module is used by commands perl script that
-  determine which command to run according to $0 (this is used this way when DrakX
-  is running).
-
-run_program: allow running a program with redirection but without using a shell.
-  allow rooted execution.
-
-help: contains all help message displayed by DrakX.
-
-log: log facility methods.
-
-lang: language manipulation methods, get and set sysconfig file, load po.
-
-keyboard: keyboard manipulation methods, get and set sysconfig file, set console
-  keyboard mapping.
-
-mouse: mouse manipulation methods, get and set sysconfig file, change mouse.
-
-timezone: time zone manipulation methods, get and set timezone.
-
-services: services manipulation methods, activate or delete services (see
-  /etc/rc.d/init.d directories).
-
-detect_devices: manage detection of various class of hardware.
-
-devices: manage device file, create device special according device name.
-
-partition_table: base partition table management methods, it manages
-  appriopriate partition_table_XXX object according to what has been read
-  as XXX partition table type.
-
-partition_table::bsd: matches a BSD partition table.
-
-partition_table::dos: matches a DOS partition table.
-
-partition_table::emtpy: matches an empty partition table.
-
-partition_table::mac: matches an Apple partition table.
-
-partition_table::raw: generic class for the following partition_table::XXX.
-
-partition_table::sun: matches a Sun Label partition table.
-
-fs: read and write /etc/fstab file, mount and umount, format.
-
-fsedit: manage (modyfy, edit) mount point associated to partition (like editing
-  /etc/fstab).
-
-swap: swap management methods, format and mount (activation).
-
-raid: raid (software only) management methods.
-
-lvm: lvm (Logical Volume Manager) management methods.
-
-loopback: loopback management methods, used for lnx4win type installation or using
-  a file as a partition.
-
-diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools.
-
-ftp: ftp mangement methods, used when using ftp install.
-
-http: http management methods, used when using http install.
-
-modparm: kernel modules options management, allow building nice dialog with each
-  module parameter available.
-
-modules: kernel modules management, allow loading or unloading (ala modprobe or
-  insmod).
-
-printer: printer management methods, read and write both LPR or CUPS configuration.
-
-printerdrake: interactive printer management methods.
-
-network: network management methods, get and set sysconfig file.
-
-netconnect: network configuration wizard.
-
-netconnect_const: network configuration wirard data.
-
-Xconfig: X configuration (monitor + already existing config file) management.
-
-Xconfigurator: X configuration wizard.
-
-Xconfigurator_const: X configuration wizard data.
-
-booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods.
-
-pkgs: rpm package and hdlist, depslist management methods, allow selecting or
-  unselecting packages, manage rpmsrate file and select group, installation and
-  removal methods of rpm file.
-
-crypto: *obsoleted* module to manage crypto site and rpm file.
-
-standalone: standalone only, allow defining a standalone tools.
-
-bootlook: standalone only, interface with DrakConf to configure bootloader options.
-
-drakfirewall: standalone only, interface with DrakConf to configure a tiny firewall.
-
-********************************************************************************
-* DrakX FAT resizer module description *****************************************
-********************************************************************************
-here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize
-FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the
-limit of the partition itself, if no cluster need to be moved, only boot sector
-partition limit are modified.
-
-any: various methods to flag cluster, compute min size.
-
-boot_sector: boot sector management methods.
-
-c_rewritten: originally resize_fat was only perl, this contains code section that
-  are the most sensible to speed or memory contraints and have been rewritten to C
-  using perl extension.
-
-dir_entry: manage directory structure.
-
-directory: traverse directory recursively, needed to move correctly cluster.
-
-fat: manage fat structure.
-
-info_sector: manage info sector.
-
-io: manage I/O on disk (need to take care of big file as partition size may be
-  larger than 2GB).
-
-main: main resizer algortihm. if needed allocate new clusters, copy files, copy
-  directories. update boot sector info.
-
-********************************************************************************
-* Adding a new step to DrakX ***************************************************
-********************************************************************************
-Say we want to add a question for setting "alawindows" option.
-We put it pretty early in the install, let's say after "Select Installation
-Class".
-
-1. in install2.pm
-
-add
-
-  selectAlawindows => [ __("A la windows or not"), 0, 1, '' ],
-
-after
-
-  selectInstallClass => [ __("Select installation class"), 1, 1, '' ],
-
-the 0, 1, '' means not "redoable", "skip on error", "don't hide"
-
-2. add your function selectAlawindows in install2.pm
-
-sub selectAlawindows  { $o->selectAlawindows }
-
-3. add your function selectAlawindows in install_steps_interactive.pm
-
-sub selectAlawindows {
-    my ($o) = @_;
-    $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1);
-}
-
-4. add your function selectAlawindows in install_steps.pm (not needed in that
-case, except for auto_install)
-
-sub selectAlawindows  {}
-
-
diff --git a/docs/README.pxe b/docs/README.pxe
deleted file mode 100644
index 2ddd205fe..000000000
--- a/docs/README.pxe
+++ /dev/null
@@ -1,133 +0,0 @@
-Here is a short description to configure a PXE server using dhcpd and tftpd.
-This allows a network boot for your ethernet card conforming to the Interl
-PXE specification.
-
-********************************************************************************
-**********                       General overview                   ************
-********************************************************************************
-
-You need a dhcp server and a tftp server on one or two machines to allow the 
-network boot. We are not using a PXE server to achieve this as it is not
-mandatory. 
-You can install tftp-server and dhcp-server package from the Mandrake
-distribution for example.
-
-On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample
-file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is
-assumed to be your domain name, and 192.168.1.1 a name server. All install are
-done on subnet 192.168.2.0.
-
-All the files that will be downloaded by the tftp daemon are located under 
-"/tftpboot" :
-  "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine
-                         where a network boot will be done, this program comes
-                         from the SYSLINUX package by H. Peter Anvin. (look at
-                         http://syslinux.zytor.com/pxe.php for more information)
-  "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for
-                         pxelinux.0 will be found, pxelinux.0 will download
-                         these file by itself. It searches first for a file
-                         named accordind to the machine IP address in
-			 hexadecimal, for example for 192.168.2.20, it
-			 looks for "C0A80214" first, then "C0A8021" and so
-			 on down to "C0", "C" and "default".
-  "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation.
-  "/tftpboot/vmlinuz"    is the boot kernel for installation.
-  "/tftpboot/help.msg"   is the message displayed by pxelinux.0, note that currently
-                         graphical message (as for install using SYSLINUX 1.48 with
-                         graphic patch by Mandrake) is not supported.
-
-All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img",
-or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation
-of the file found on the "network.img" called "syslinux.cfg" but without the reference
-to boot.msg (as it is not currently supported).
-
-Update network configuration for your needs and start dhcp server on the machine and
-tftp server and this should work.
-
-********************************************************************************
-* /etc/dhcpd.conf **************************************************************
-********************************************************************************
-ddns-update-style ad-hoc;
-
-authoritative;
-
-option space PXE;
-option PXE.mtftp-ip code 1 = ip-address;
-option PXE.mtftp-cport code 2 = unsigned integer 16;
-option PXE.mtftp-sport code 3 = unsigned integer 16;
-option PXE.mtftp-tmout code 4 = unsigned integer 8;
-option PXE.mtftp-delay code 5 = unsigned integer 8;
-option PXE.discovery-control code 6 = unsigned integer 8;
-option PXE.discovery-mcast-addr code 7 = ip-address;
-
-default-lease-time 28800;
-max-lease-time 86400;
-
-option domain-name "mydomain.com";
-option domain-name-servers 192.168.1.1;
-
-class "PXE" {
-  match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
-  option vendor-class-identifier "PXEClient";
-
-  vendor-option-space PXE;
-  option PXE.mtftp-ip 0.0.0.0;
-  next-server 192.168.2.1; #tftp server location
-
-  filename "pxelinux.0";          # standard TFTP
-
-}
-
-shared-network "mynetwork" {
-  subnet 192.168.2.0 netmask 255.255.255.0 {
-    option subnet-mask 255.255.255.0;
-    option routers 192.168.2.1;
-
-    ddns-domainname = "mydomain.com";
-
-    pool {
-      range 192.168.2.10 192.168.2.20;
-      allow members of "PXE";
-    }
-  } 
-}
-********************************************************************************
-* /tftpboot/pxelinux.cfg/default ***********************************************
-********************************************************************************
-default linux
-prompt 1
-timeout 72
-display help.msg
-label linux
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=788
-label vgalo
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=785
-label vgahi
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=791
-label vga16
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga16
-label text
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 text
-label patch
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 patch vga=788
-label expert
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 expert vga=788
-label rescue
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 rescue rw
-label oem
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-********************************************************************************
-* Usefull linkst ***************************************************************
-********************************************************************************
-
-http://syslinux.zytor.com/pxe.php
-http://www.kano.org.uk/projects/pxe/
diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS
deleted file mode 100644
index 93a7133db..000000000
--- a/docs/SHORTCUTS
+++ /dev/null
@@ -1,51 +0,0 @@
-********************************************************************************
-main shortcuts
-
-F1 -> help
-F2 -> take a screenshot
-F11 -> previous step
-F12 -> next (reachable) step
-
-********************************************************************************
-diskdrake
-
-taken directly from diskdrake.pm:
-
-		"a" => \&Active,
-		"b" => \&Move,
-		"c" => \&Create,
-		"d" => \&Delete,
-		"f" => \&Format,
-		"m" => \&Mount_point,
-		"M" => \&Mount,
-		"n" => \&Create,
-		"o" => \&ReadFromFile,
-		"s" => \&SaveInFile,
-		"q" => \&Exit,
-		"r" => \&Resize,
-		"t" => \&Type,
-		"u" => \&Unmount,
-		"w" => \&WritePartitions,
-		"W" => \&WriteFstab,
-
-hopefully it is explicit enough :)
-
-********************************************************************************
-list choice
-
-- acceleration a la windows (default): enter a letter and the selection will move to the
-first entry beginning with that letter. If you enter another letter it will try
-to find the entry beginning with the 2 letters you have given. In case it fails
-the starting_word is reset.
-- incremental search a la emacs: searches trough the list
-
-Use control-s to use incremental search and then to search next occurence
-
-********************************************************************************
-in case of complete mouse sh**t
-
-XFree86 provides a way of moving the mouse pointer:
-- first, press Ctrl-Shift-NumLock
-- then move the pointer with the keypad arrows
-- press button is ``0'' (aka Inser)
-- release button is ``.'' (aka Suppr)
diff --git a/docs/TODO b/docs/TODO
deleted file mode 100644
index cb9399f82..000000000
--- a/docs/TODO
+++ /dev/null
@@ -1,515 +0,0 @@
--URGENT---------------------------------------------------------------------------------
-check for fpons/pixel BOTH that resize_fat is clean for current version
-relative to 7.0-2.
-
-heavy testing of diskdrake to avoid corrupting partition table, current version
-should be available to fix bogus partition table, writing enabled only when
-partition is Ok (fixme? allow primary partition inside extended one, but with
-warning on diskdrake startup, made them as warning ?).
-
--features-------------------------------------------------------------------------------
-add rpmdrake in menu
-
-(7.1 or later) clean SCSI CDROM autoboot.
-(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
-
-(7.1)better help for partitioning in newbie
-
-(7.1)Improved network configuration (PPP and/or Ethernet)
-PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-
-----
-(7.2) replace normal with standard (in the installClass's)
-
-(7.2 or later)horizontal sub-steps
-
-(7.2 or later)diskdrake in text mode
-
-ask "do you have SCSI?" before asking "probe PCI or not"
-
-(?) paride in stage1
-(done,gc,8.0) stage1 & network: add ability to choose the network interface to use
-
-(?) msec custom
-
-(?)firewall configuration (instant firewalling?)
-
-(?)widget for displaying fdisk (dindinx)
-add fdisk using the zvt widget (taken in gnome-libs)
-
-(?)help in some configuration files.
-
-ability to add nfs/weird_fs entries in fstab
-
-size of packages in crypto
-
--to test--------------------------------------------------------------------------------
-what's lseek64?
-
-ensure installClass is set to something in auto install.
-
-for axp, swriteboot -f1 if swriteboot failed.
-axp with swap part sigsegv
-
-tree for choosing monitors (buggy?)
-
-what happens if a module fails to insmod (scsi step), in beginner/normal/expert
-
-fstab must be sorted (/usr/local after /usr)
-
-RAID upgrades
-
-add choice clean /tmp or not in expert
-
-kernel chosen by default must be the one according to supermount/secure
-
-bug if ide-scsi, no more hdX, but scd0 (aka sr0)
- (and add alias block-major-11 ide-scsi ?)
-
-check on update for conf.modules and modules.conf !
-
-with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
-
--easy fixes-----------------------------------------------------------------------------
-rpmdrake proposition for cdrom labels
-
-use option nocheck to mount for upgrades
-
--fixes needing thinking-----------------------------------------------------------------
-bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
-
-ask network configuration only if NIC found?
-
-configure DHCP for newbies if ethernet & DHCP card available
-
-xvidtune like screen configuration (see SuSE's yast)
-
-live cdrom for alpha (sparc?)
-
-network boot
-
-get the error when getting/reading .rpm files fail
-better timeout handling for network installs
-
-handle not enough room for update
-(fpons)verify the free space is big enough.
-
-the XFdrake test does not handle the fontset
-
-> Here I go into the printer configuration select 'HP Deskjet 722C Colour',
-> print a test ASCII page, pressing 'No' when prompted to indicate the page did
-> not print OK and then hitting cancel when prompted to choose a printer type
-> again.
-> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-
-diskdrake: take from parted mklabel, hide(?)
-
-bug in kde desktop if keeps home but not an upgrade
-	
-bug in users: mandrake user is added twice in strange installs
-(mixed of security 0 + ???)
-
-bugs rpmdrake: 
-- just after installing a package, switch to `Installed', the package has wrong name
-- refresh the kde desktop after package installation in rpmdrake
-(restart kpanel)
-- rpmdrake and same name packages
-
-urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3
-
-bug in defcfg in with lang=fr_FR, display is buggy
-
-bug keyboard focus: after switch in console at Xconfig step
-
-
-
--to look at--------------------------------------------------------------------------
-adduserdrake to remove/update users
-
-(???)free provider auto configuration facility (to be discussed).
-auto ppp-configure with free provider
-
-(?)on laptop, configure the MMU to use swap not very often
-
-(?)checkboxes in groups based on compssList (and availableSpace?)
-
-(?)see what can be done with nvram (50 bytes to save information)
-
-better wacom support
-
-(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
-  (work with magicfilters (debian))
-  (should be handled by ghostscript BJC600's driver)
-
-(pix)install text on mem=8M, mem=16M?
-
-(pix)kickstart
-partitioning? raid?
-X configuration and bootloader in kickstart
-
-XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-
-(?) options in mkfs, progress bar when formatting
-
-(?) when some error occurs, partition must be unset isFormatted
-
--hardware-------------------------------------------------------------------------------
-- with no floppy drive, mkbootdisk step fails badly
-- with bad floppy or write protected, mkbootdisk doesn't say anything
-- try detect_devices::floppies (and how are scsi floppies handled?)
-maybe: do a iotcl FDGETPRM to detect fd1, fd0.
-
-need a simple solution to precise mouse type (syslinux option?)
-
-ELSA Gloria has bad ddc info
-
-token ring is tr0 not eth0
-
-I have Mandrake 6.1  installed and working on a ThinkPad 770.
-To enable the PCMCIA Token ring I have to append the following line to
-/etc/pcmcia/config.opts
-module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000"
-
-smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW)
-
-UDMA66 (ultra66.o for promise)
-
-aha152x needs "insmod aha152x.o aha152x=0x140,11,7"
-
-(obsolete) usb module not removed if no mouse found
-
-(fpons)handle dat drives
-
-hibernation on laptop -> clock not restored
-
-# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled
-
-(?)enable the testing of the mouse type (under X) (wheel)
-possibility to specify the mouse
-
--(?)---------------------------------------------------------------------------------
-(?) handle NT (add entry for it in lilo, put it in fstab)
-
-(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
-disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
-
-(?)using setxkb, enable the testing of the keyboard
-
-(?)XFdrake does not handle fbdev
-
-(?) Je viens de faire une installation sur une machine o� seul Be �tait
-install�. Je l'ai supprim� et install� (mode recommand�) Oxygen. Au
-red�marrage, le boot manager de Be appara�t et il est impossible de
-d�marrer Linux.
-Pourquoi ne pas installer LILO si on supprime toutes les partitions ?
-
-(?)initrd in bzip2
-
-(?)smaller zsh (or ash in initrd)
-
-(?)is configureNetworkNet needed with dhcp/bootp?
-
-(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/
-
-(?)mandrake_desk was not installed while kdebase it there on upgrade
-
-(?)when clicking on X configuration, installation of packages is not displayed
-
-(?)maybe remove commented lines in /usr/lib/perl5/... files
-
-(?)timezone using a picture (pb: how to delimit zones)
-when asking GMT or not, display the time for each possibility
-the list is too big for USA
-
-(?)ability to select the type of install when booting of cdrom
-(?)use the ability of el torito to handle 2.88MB or more 
-
-(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners
-
-(?)loadFont sucks
-
-(obsolete)trash on the screen when X first starts
-
-(?)remove the gray line surrounding the logo
-
-(?)cleanup /etc/services & /etc/protocols
-
-(?)strange: no scsi of type 'fd', only 'tape'
-
-(?)remount ro before X test.
-
-(?)remove every << and >> (doesn't handle > 32bits)
-
-
--done---------------------------------------------------------------------------------
-(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool.
-
-(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically
-after clear all and auto allocate, try maximal size available).
-
-(done,fpons)rewrite mouseconfig in perl?
-
-(done,pix)kudzu or not in miscellaneous
-
-(done,pix)warn the user if not enough ram to fulfill install
-
-(done,fpons)test after printer config
-
-(done,pix)ask for more than the memory size detected
-
-(done,fpons)modem config
-
-(done,pix)call kudzu in batch to initialize its list
-
-(done,pix)standalone generator of mdkinst_stage2.gz
-
-(done,pix)text install
-
-(done,pix) if u choose mouse usb != found mouse, it fails at X config
-
-(done,pix) diskdrake bug: saved information on floppy contains isMounted.
-
-(done,pix) update devices.c from modules.pm
-
-(done,pix) in lilo.conf, put 
-disk=/dev/hdb
-  bios=0x80
-
-(done,pix) diskdrake
-auto_partitions
-suggested partition tables must be better foreach installClass
-
-(done,pix) update the list of modules (in update_kernel)
-
-(done,pix) language support: only choose the right locales and upmark the packages requiring it
-
-(done,pix) move security question before isntallation of packages
-
-(done,pix) install ssh
-
-(done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
-
-(done,pix) install_steps.pm: 569 (128M + 3)
-
-(done,pix) bug: mouse freeze just before network configuration (mouse primax)
-  (was kudzu)
-
-(done,pix) signal 11 in stage1 nfs kickstart mount failed
-
-(done,pix) ask supermount or not, no supermount with kernel-secure
-
-(done,pix) fix bug in g_auto_install (can't go through all)
-
-(done,pix) bug: install from ciril.fr fails
-
-(done,pix)wizard for partitioning in case of one full vfat
-
-(done,dindinx)app for choosing drakxtools (drakxconf)
-(done,pix)verify being root
-(done,pix)log::l -> initlog
-
-(done,pix)install apmd for laptops (maybe not start apmd though)
-(done,pix)icewm apm (sh icewm_apm)
-(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart)
-
-(done,pix)bug in adduserdrake: missing pwconv in md5
-(done,pix)correct the default value of draksec (cp draksec)
-(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert
-
-(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window
-
-(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config
-
-(done,pix) hwiz and supermount and eject :(
-
-(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install)
-
-(done,pix)perl and .ph's
-
-(done,pix) BUG bootp in network install sigsegv
-
-(done,pix) move the last done stuff before Xconfiguration if possible
-
-(done,pix)draksec is buggy, don't try security >= 4
-
-(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
-
-(done,pix)missing alias ll for root
-
-(done,pix)urpmi.addmedia:  |gzip instead of doing it afterwards
-
-(done,pix)locale (and fonts?) buggy in case ramdisk is used
-
-(done,pix)rpmdrake: Installed packages not in hdlist should be there
-
-(done)in ftp install, locale not installed properly
-
-(done,pix)pcmcia.img does not handle hd/cdrom
-
-(done,pix)cyrillic font buggy in DrakX
-
-(done,fred)remove xfs user from kdm
-
-(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive)
-
-(done,pix(works))test ramdisk stage2 and romanian
-
-(done,pix)kfmrc
-
-(done,pix)on laptop, default to 1024x768
-
-(done,pix)mkinitrd and deps
-
-(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them
-
-(done,pix)crypto message
-
-(done,pix)test bug with lilo and windows (if not on mbr)
-
-(done,pix)removed icons come back later (kde desktop)
-
-(done,pix(was bug in upgrade reading old config))
-  segfault in linuxconf (adapter 1 empty)
-  (test with the sysconfig sent)
-
-(done,fpons)bug: Lrosqu'on effectue une mise � jour et que /etc/lilo.conf
-contient la variable � default � positionn�e sur autre chose que
-� linux � ou � windows �, DrakX est incapable de g�n�rer LILO.
-
-(done,fpons)bug: GeForce and hd.img?
-
-(done,fpons)for upgrade in expert, give choice of packages to install
-   choosing packages available in upgrade?
-
-(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too)
-
-(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd)
-       Do  not  update  inode  access times on this
-       file system (e.g, for faster access  on  the
-       news spool to speed up news servers).
-
-(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons
-
-(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "")
-(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE)
-(done,pix)group cdrom in /etc/group (gid=22)
-(done,pix)drakxtools should require urpmi
-(done,pix)bug: gdm unset LANG
-(done,pix) zip with automount -> ppa not autoloaded
-(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc
-(done,pix)lilo in russian/japaneese is horrible
-(ok,pix)test ide burners
-(ok)test check bad blocks optional for mke2fs
-(done,pix)hd install: no umount is done at the end of install :(
-
-just before release:
-(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as 
-(done,pix)- crypto dependencies to update
-(done,pix)- update kudzu's pcitable
-(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's)
-            ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64)
-
-(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp
-
-(done,pix) replace
-	{ device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 },
-by
-	{ device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 },
-
-(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html)
-
-(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG)
-
-(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le syst�me, un
-message d'erreur appara�t pour signaler le probl�me (bien) mais on ne
-peut en sortir. La seule solution est de red�marrer.
-
-(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect)
-
-(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline
-
-(done,pix)urpmi: handle many args on cmd-line
-
-(done,pix)fix any // in path to ftp server otherwise windobe server bug :(
-
-(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected,
-try to figure why?
-
-(done,pix)in chooseResolutions: display the graphic card found
-
-(done,pix)with pcmcia, need ONBOOT=no
-
-(fpons,done) XFree: handle by card options
-eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
-
-(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
-
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
-
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
-
-(done,pix,7.1?)loopback partitions (even root one)
-
-(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
-(done,pix,7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
-(done,pix,7.1)grub
-
-(done,pix,7.1)feature missing: cancel installation
-
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
-(obsolete) have a better time estimation of the remaining time in install packages
-
-(done,dindinx+pix)ask_many_from_list can't keyboard scroll
-
-(done,pix,7.1)individual package selection: double click is tiring...
-
-(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-
-(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
-(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if
-already hda1 with /boot/vmlinuz
-
-(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added)
-
-(done,pix)chooseGroup with individual alone
-
-(done)(7.1) rewrite crypto stuff
-(done)crypto: add a cancel & progress bar while downloading
-(done)error handling (like reading hdlist)
-(done)(7.1)progression bar on crypto.
-
-(done, daouda&pix,7.1, other persons)rescue: 
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
-(done,7.1)install in 800x600
-- need handling of both 640x480 (mostly for VGA16) and 800x600
-
-(done,NEED 7.1) auto-install for corporate, very important (need consolidation).
diff --git a/docs/advocacy b/docs/advocacy
deleted file mode 100644
index 9e7f00b6b..000000000
--- a/docs/advocacy
+++ /dev/null
@@ -1,87 +0,0 @@
-a little DrakX history:
-
-june 1999: 
-  i start rewriting redhat's install in perl, partly for the fun of it. I'm
-  still working for the army
-
-5 july 1999: 
-  i start full time job at mandrakesoft. But we don't have many computers and i
-  must share the accounting computer with Merieme who is working half-time. No
-  test machine (i test on others box, and destroyed Jacques partitions once),
-  guess how it slows things down?
-
-august 1999: 
-  at last computers, even test one
-  first DrakX version which can install things, very very rough
-
-september 1999: 
-  a friend of mine help me 2 weeks on DrakX relayed by Francois
-
-november 1999:
-  first released version of DrakX (goldpack). Not really stable yet.
-
-january 2000:
-  7.0 is out, with a DrakX quite stable
-
-july 2000: 
-  dams starts working on draknet
-
-mid-october -> mid-january 2000: 
-  gc rewrites the stage1 to win every kb we can 
-  -> size divided by 7 (!) for cdrom
-
-
-The DrakX team is also doing a lot of other things:
-- drakxtools
-- urpmi, early MandrakeUpdate, early rpmdrake...
-- Mandrake Control Center (new DrakConf)
-- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo)
-- fixing core packages to make them installable
-- scoring packages, sorting them, flagging them... (compssList, rpmsrate)
-- reading/answering cooker and other MLs
-- helping non-perl gurus :)
-
-That doesn't give much. Me being the one more working on plain DrakX. It gives 2
-people working for 1.5 years. IMO it isn't ``spending an enormous amount of
-resources''.
-And what do you mean by ``compared to the code base size''??? DrakX is currently
-around 28K lines, which is big IMO. You can compare it with linuxconf which is
-170K lines. I think the achievement of DrakX is comparable (a 6 times code size
-win from dumb C++ to expressive perl is normal imo).
-
-
-Also it seems like we don't have the same understanding of the word
-"maintenance".
-DrakX functionalities have evolved *a lot* since the beginning:
-
-- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...)
-- making things prettier
-  - more bitmaps
-  - "advanced" button
-  - syslinux graphical boot
-- making it work with latest versions of software (eg: switching to rpm4)
-- finding out the best way to use rpmlib
-- multi-cd
-- draknet: configuring every piece of stupid protocols
-- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry
-- XFdrake: multi-mice, multi-heads, 3D-accel
-- porting to axp/sparc/ppc (with Stew's help)
-- always more i18n
-- keeping things small
-  - .cz format
-  - moving to .png
-  - getFile on demand from mdkinst for ramdisk installs
-
-[...]
-
-> You don't believe the books ? Count yourself; see the man/months spent
-> in 'pure' developoment in drakX, and the resources put in mantainance
-> of the code base; as far as i know, your count should confirm what the
-> books says; more probabily, you will discover that our numbers are
-> even worse.
-
-if you count enhancements, adding features... in maintenance, i confirm the
-numbers, and find them quite normal.
-
-if you only count bug fixing, the time would be much shorter (around 30%).
-
diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive
deleted file mode 100644
index 99036008e..000000000
--- a/docs/advocacy-interactive
+++ /dev/null
@@ -1,60 +0,0 @@
-
-> > We already have some functional backends, frontends, that works great, and has
-> > not been thrown away since 1 year. We use it during install, post install, mcc
-> > and so.
-> 
-> But aren't generic enough.
-
-DrakX handles:
-- buttons
-- bool values (checkboxes)
-- ranges
-- entries
-- combo boxes (editable or not)
-- lists / radio boxes
-- tree lists
-- iconlist
-- wait messages
-
-Features:
-- all the entries above can be mixed
-- nice separation between data and displayed data (eg: choose in list of
-objects representing hda/hdb/... but displayed nicely with size...)
-- keyboard handled nicely in GTK frontend
-- callback on events:
- ok pressed => check before the dialog is hidden
- focus changed => 
-  * enables pre-setting things based on other entries
-  * value checking on the fly
-- simple/advance toggle 
-- shadowing of entries
-- tooltips
-- size of windows computed the best possible
-- perl-based
-
-Misfeatures:
-- display not flexible (though i don't know any of the tools we're talking
-about that is flexible => nice)
-- quite a few features are gtk only (simple/advance toggle, shadowing of
-entries, certain events, tooltips).
-- a stdio front-end exist but handle only certain entries. It would need a
-week-work to finish it
-- a http front-end could be done (mod-perl needed)
-- perl-based
-
-The DrakX frontend (called "interactive") could be moved out of DrakX.
-
-eg of use:
-
-<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment>
-<#/part>
-
-[...]
-
-> > -provides a lot of frontends
-> 
-> And you ideally have to provide a frontend by widget set.
-
-nope. The interface is completly standardised, even if it include some
-gtk-like niceties. The *complete* newt (and not just entries and radioboxes
-like bus) binding takes 241 lines.
diff --git a/docs/comparisons b/docs/comparisons
deleted file mode 100644
index f399a9e84..000000000
--- a/docs/comparisons
+++ /dev/null
@@ -1,288 +0,0 @@
-redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything")
-
-upgrade to redhat 6.2, sum 757MB, df 936MB, 20min
-
-mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages
-
-upgrade to cooker, sum 1000MB, df 1404MB, 35min
-
-
-redhat 7.0b, install 815MB, df 960MB, 18min
-redhat 7.0, install 995MB, df MB, 26min
-
-7.2b, 3.3GB 2h26
-
-
-7.2b: (lang fr)
-compssLevel  df  rpm  	time  fs          df/time
-	               	     
-100          64   59  	0:59  ext2 500M   1.08
- 90         132  127  	1:50  ext2 500M   1.20
- 80         226  218  	3:26  ext2 500M	  1.10
- 70         449  387  	5:52  ext2 1G	  1.28
- 60         614  541  	8:36  ext2 1G	  1.19
- 50        1113  943   17:40  ext2 2G	  1.05
- 40        1193 1013   20:39  ext2 2G	  0.96
- 30        1262 1072   22:28  ext2 2G	  0.94
- 20        1445 1219   27:34  ext2 2G	  0.87
- 10        1649 1394   36:58  ext2 2G	  0.74
-  0        1943 1638   48:02  ext2 2G	  0.67
--10        2957 2519  101:49  ext2 4G 	  0.48
-
-7.2b: (lang all)
-compssLevel  df  rpm  	time  fs          df/time
-
-100          70   59  	1:04  ext2 500M   1.09
- 90         289  281  	4:20  ext2 500M	  1.11
- 80         373  361    5:41  ext2 500M	  1.09
- 70         890  794   13:28  ext2 1G	  1.10
-
-
-mem used 7.2cooker
-gtk:   runinstall2 13608(data 9572) + FBDev 2984(data 1544)
-newt:  runinstall2  9516(data 7528)
-stdio: runinstall2  9160(data 7372)
-
-8.0rc1: (lang fr)
-
-rpmsrate
-
-4   ()        175   139    3:25   reiserfs 2G  0.85
-4   all       831   786   18:08   reiserfs 2G  0.76
-
-8.1b
-
-5   ()         77    66    1:24   ext2 300M
-
-8.1pre_rc1     rpm   df                       time/rpm  rpm/df
-
-6   ()         82    66    1:26   ext2 500M   1.05      1.24
-5   ()         89    71    1:38   ext2 500M   1.10	1.25
-3   ()         94    77    1:46   ext2 500M   1.13	1.22
-5   X         145   127    2:09   ext2 500M   0.89	1.14
-3   X         231   217    3:26   ext2 500M   0.89	1.06
-4   kde       393   316    4:31   ext2 2G     0.69	1.24
-4   kde       393   316    4:41   ext2 2G     0.72	1.24
-4   kde       393   316    4:43   ext2 4G     0.72	1.24
-5   all       367   337    5:02   ext2 500M   0.82	1.09
-4   kde+gnome 454   370    5:50   ext2 4G     0.77	1.23
-4   kde+gnome 454   370    6:10   ext2 4G     0.81	1.23
-4   kde+gnome 454   370    6:24   ext2 4G     0.85	1.23
-5   all       489   406    5:55   ext2 4G     0.73	1.20
-5   all       490   406    5:18   ext2 1G     0.65	1.21
-4   kd+gn+dsk 594   494    7:31   ext2 4G     0.76	1.20
-4   prev+dev  827   696   10:27   ext2 4G     0.76	1.19
-4   all      1100   988   19:34   ext2 1G     1.07	1.11
-3   all      1640  1331   31:33   ext2 2G     1.15	1.23
-3   all      1740  1434   39:38   ext2 4G     1.37	1.21
-2   all      2252  1843   54:40   ext2 4G     1.46	1.22
--1  all      2490  2048   61:02   ext2 4G     1.47      1.22
-
-# perl -alpe '$F[4] =~ /(.*):(.*)/; $r = ($1 * 60 + $2) / $F[2]; s|\S+(\s+\S+)\s*$|sprintf("%.2f", $r) . "$1"|e;'
-# perl -ape '$r = $F[2] / $F[3]; s|\S+\s*$|sprintf "%.2f\n", $r|e;'
-
-9.0beta1
-
-5   ()         89    71    1:35   ext2 500M
-3   X         240   231    3:41   ext2 500M
-5   all       306   293    3:36   ext2 500M
-4   all       808   731    6:48   ext2 1G
-4   all      1433  1331   21:44   ext2 2G
-4   X+kde     822   749    6:05   ext2 2G
-4   X+gnome   369   319    5:58   ext2 2G
-
-
-redhat 7.3:
-- do not halt the box when "halt" is used
-- no sysreq
-- kdm has gnome entry whereas gnome is not installed
-  => choosing gnome gives a flashing black screen and kdm reruns
-
-- repartition of packages on various CDs is crap
-
-- bootloader: handling of multiple disks is more powerful in redhat, but more
-dangerous (proposed to everyone, but not proposed especially to people having
-a dangerous combinaison)
-- why still asking about lba32!!
-
-* anaconda 7.3 vs 7.3.92
-  - skipddc option (locks some machines) ??
-    maybe because it's done at the beginning of their install?
-  
-  - LVM
-    - lvm_dialog_gui.py
-    - Physical Extent 1MB 2MB 4MB ... 16GB
-      (vgcreate -s ${PhysicalExtentSize}k)
-    - see lvm_sanity_checks.txt, take them
-    - lvm on / (mkinitrd)
-    - handle upgrade when lvm on /
-    - vgcreate -An (ie --autobackup no) ??
-      (also for lvcreate vgchange lvremove
-    - see clampPVSize in lvm.py
-
-  - RAID
-    - Number of spares ??
-    - mkraid --dangerous-no-resync  ??
-  
-  - progress bar in ext2 formatting
-  
-  - ctrl-alt-suppr during install => reboots
-  
-  - user names: the regexp is [a-zA-Z][^\0-\x20:,\n]*  or  [A-Za-z][A-Za-z0-9]{0,7}   (depending on wether you're in text mode or graphic mode :)
-  - check the user name created is not a system one (see systemUsers)
-  
-  - SMB authentification
-  - cloneDrive ?
-
-  - edd dropped (was to detect lba32 capability, which was dumb)
-
-  - reconfig type of installed removed (was something between install & upgrade)
-
-  - ddcprobe code removed -> moved to kudzu
-    changes: sigprocmask and movl added around lrmi_vm86
-
-  - $ENV{GDK_USE_XFT} = 0
-
-* kudzu 0.99.52 vs 0.99.55
-  - blacklisting modules.pcimap e100 and bcm5700
-
-* hwdata 0.14 vs 0.32
-  - dropped XFree86 3.3.6 support
-
-  - upgradelist: list of (old_module => new_module) for upgrades
-    (a simpler way would be to drop entries in modules.conf that concern
-    obsolete (and not available anymore) modules, relying on auto-detection to
-    add the new one)
-
-  - CardMonitorCombos (for laptops)
-
-redhat 8.0:
-
-  (legend: + pros  - cons  / notice)
-  
-  Install steps difference
-  + firewall wizard
-  + md5sum check when booting install
-  - no upgrade packages installation during install
-  - no services configuration (chkconfig)
-  - no printer configuration
-  - no autologin
-  - no real small installation
-  - no small packages (groff-for-man, perl-base...)
-  / still propose non-MD5 or non-shadow passwords
-  / post install tool (firstconfig)
-  
-  General install behaviour, eye-candiness
-  + package selection a la Windows
-  + in language selection languages displayed in native language
-  + candy timezone selection
-  + help uses bold/italic/big-font
-  - no one CD install
-  / not using fb at install
-  / python + gtk2  vs  perl + gtk
-  / ask many things before doing anything (esp. delayed partitioning, swap not available when selecting packages!(?))
-  - more width-hard-coded dialog boxes (harder for translations)
-  / use a loopback file from the CD then copied on system
-  
-  Partitioning
-  - no diskdruid after install
-  - no partitioning wizard
-  - no devfs
-  - no xfs (but now has reiserfs/jfs)
-  - no loopback crypted fs
-  - no file swap (?)
-  - no supermount
-  + LABELed entries in fstab
-  + progress bar while formatting
-  
-  Bootloader
-  + bootloader configuration less awkward
-  - no automatic handling of bios ordering with many harddrives
-  - propose to manually change bios ordering even with one harddrive
-  - LBA32 checkbox
-  / defaults to grub
-  
-  Network
-  - awkward question apropos hostname when using DHCP
-  - no default choice for netmask/gateway/DNS based on IP
-  
-  XFree
-  - no wacom configuration
-  - no graphic card multi-head configuration
-  - no ATI tvout configuration
-  - no prompt for logout after changing X config
-  - VideoRam prompted for everybody
-  / no XFree3
-  / no Utah GLX
-  / load module "fbdevhw" "record", but not "v4l"
-  / always load module "glx" and "dri"
-  
-  Keyboard
-  - many non useful keyboard entries (eg: latin0)
-  - no way to choose the toggle key to choose between latin/non-latin keyboard 
-  - no loadkeys done during install for console
-  
-  Mouse
-  - no way to test mouse choice
-  - mouse choices include many non-useful choices, badly sorted
-    (Intellimouse must be sought in Microsoft whereas it's used by many others)
-  
-  Multimedia
-  - no bttv configuration (including webcams)
-  - missing audio modules (alsa, audigy...)
-
-* anaconda 8.0 (rel. 4) vs 8.0.92
-  - use vte instead of gnome.zvt
-  - add alpha (axp) partitioning code
-  - remove label "nofb" and options "devfs=nomount ramdisk_size=9216" from syslinux.cfg
-  - edd (ddc probe) moved to kudzu
-  - add "-Odir_index" option to ext3 tunefs 
-  - screenshoting in directory /root/anaconda-screenshots/ instead of using exported display
-  - assembler code change in cpuid, smp.c
-  - there is some code to read the "raid superblock" (see doGetRaidSuperblock in isys/isys.c)
-  - new code for choosing to upgrade or not
-  - hack to remove /var/lib/rpm/__db.00[123] (with comment "make sure that the rpmdb doesn't have stale locks :/")
-
-* anaconda 8.0.92 vs 8.0.93 (rel. 0.20030108205243)
-  - drop xmode (bring up text mode in a remote xterm)
-  - code available to check the ability to do a mkbootdisk 
-    (check size of vmlinuz + initrd, check size of floppy)
-  - drop "-Odir_index" option to ext3 tunefs 
-    (with comment "add back -Odir_index when htree is safe")
-  - waitForLink added to loader2/net.c using added ethtool thingy (get_ethtool_link_status, get_link_status)
-  - OS390 fdasd & z/IPL changes
-  - for kickstart, new option "--ignoremissing", (there were --ignoredeps and --resolvedeps)
-  - /usr/kerberos/lib in LD_LIBRARY_PATH
-  - these are symlinks so you cant make them mount points
-    otherexcept = ['/var/mail', '/usr/bin/X11', '/usr/lib/X11', '/usr/tmp']
-
-	    elif self.mountpoint in otherexcept:
-                return _("The mount point %s cannot be used.  It must "
-			 "be a symbolic link for proper system "
-			 "operation.  Please select a different "
-			 "mount point.") % (self.mountpoint,)
-		
-
-* hwdata 0.47 (redhat 8.0) vs 0.62 (redhat 8.1 beta1 phoebe)
-  - pcitable & upgradelist
-     - replace eepro100 with e100
-     - switch 0x1106 0x3059 "via82cxxx_audio" to "unknown"
-  - Cards
-     - remove most swcursor with comment:
-        # mharris - Nov 23, 2002 - Commented out the swcursor option, if it is still
-        # needed, then lets disable it right in the driver completely, or possibly
-        # fix it.
-     - using driver "nv" for GeForce4 and Quadro4 with comment:
-        # mharris - Nov 23, 2002 - enabling "nv" driver for GeForce 4 and Quadro 4 as
-        # CVS XFree86 support them now in 4.2.99.2
-     - special options "externDisp" and "internDisp" for NeoMagic cards
-       together with CHIPSET
-
-* kudzu 0.99.69 (redhat 8.0) vs 0.99.83 (redhat 8.1 beta1 phoebe)
-  - don't read eepro100 entries from the pcitable
-  - handle compressed modules
-  - many changes in PS/2 mouse detection, and handle "intellips/2" mouse
-  - changes in PnP serial modem detection
-  - use "udf,iso9660" option for cdrom entry in fstab 
-    (note that comma separated choice of filesystems *is* allowed, though not
-     documented in fstab(5))
diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
deleted file mode 100644
index e6f2da038..000000000
--- a/docs/diskdrake.TODO
+++ /dev/null
@@ -1,23 +0,0 @@
-- test what windows can handle (the number of partitions)
-- better keyboard focus handling
-- end sector in Create
-- add warnings for scsi drives if you create more than sdx15
-- the information put in save/restore partitions must be cleaned
-(remove mounted/formatted/..., also remove the Data::Dumper dependency)
-- test, test, test
-- do not allow swap partitions above 2Gigs
-- wanting the first partition to be extended is not used
-- maybe warn if a mounted partition change of dev number
-- text version
-- better error handling (what to do if we find a bad partition table?)
-- display the information about the correspondance color2type
-- handle the partition labels (missing information here)
-- add comments in the code
-- add documentation
-- handle the `luke' case (main extended partition must be extended)
-- ability to batch actions (like chained moves)
-- add a verification after fdiskReadPartitionTable that the start_cyl,
-end_cyl... do correspond to start and start+size. For the moment, this
-information is just discarded :(
-This verif can't be done in fdiskReadPartitionTable as start is relative in
-extended partitions
diff --git a/docs/drakfont/Makefile b/docs/drakfont/Makefile
deleted file mode 100644
index b70b4a0c8..000000000
--- a/docs/drakfont/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-#
-#        Project   : Projet  Libre
-#        file      : pki.tex
-#             Date : Thu Jun 21 19:26:19 CEST 2001
-#   (o-       Id   : DUPONT Sebastien
-#   /\        mail : <dupont_s@epita.fr>
-#  Y_/___________________________________________
-#
-
-RM 	= 	@rm -f
-
-CD	=	@cd
-
-ECHO	=	@echo
-
-PRINTF	=	@echo -n
-
-FILE	=	drakfont
-
-DVI	= 	@dvips -j0 -Pcmz -Pamz -o
-
-PS	=	@ps2pdf
-
-LATEX	=	@latex
-
-normal	:
-	$(ECHO) '[35m/*--LATEX--*/[0m'
-	$(LATEX) $(FILE).tex
-
-all	: 
-	$(ECHO) '/*----------latex -> dvi -> ps -> pdf------------'
-	$(ECHO) '[35m/*--LATEX--*/[0m'
-	$(LATEX) $(FILE).tex
-	$(ECHO) '[35m/*--DVI -> PS--*/[0m'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '[35m/*--PS -> PDF--*/[0m'
-	$(PS) $(FILE).ps
-	$(ECHO) '[35m/*--That s all--*/[0m'
-
-
-ps	: normal
-	$(ECHO) '[35m/*--DVI -> PS--*/[0m'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '[35m/*--That s all--*/[0m'
-
-pdf	: ps
-	$(ECHO) '[35m/*--PS -> PDF--*/[0m'
-	$(PS) $(FILE).ps
-	$(ECHO) '[35m/*--That s all--*/[0m'
-
-clean	:
-	$(RM) $(FILE).toc $(FILE).log $(FILE).aux *~
-
-fclean	:
-	make clean
-	$(RM) $(FILE).ps $(FILE).pdf  $(FILE).dvi  
diff --git a/docs/drakfont/dia_srcs/drakfont.dia b/docs/drakfont/dia_srcs/drakfont.dia
deleted file mode 100644
index c4502a12e..000000000
--- a/docs/drakfont/dia_srcs/drakfont.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_install.dia b/docs/drakfont/dia_srcs/drakfont_install.dia
deleted file mode 100644
index 737c19b9f..000000000
--- a/docs/drakfont/dia_srcs/drakfont_install.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_uninstall.dia b/docs/drakfont/dia_srcs/drakfont_uninstall.dia
deleted file mode 100644
index c06f92dd6..000000000
--- a/docs/drakfont/dia_srcs/drakfont_uninstall.dia
+++ /dev/null
diff --git a/docs/drakfont/drakfont.jpg b/docs/drakfont/drakfont.jpg
deleted file mode 100644
index 898dfe440..000000000
--- a/docs/drakfont/drakfont.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont.tex b/docs/drakfont/drakfont.tex
deleted file mode 100644
index bbc936e5b..000000000
--- a/docs/drakfont/drakfont.tex
+++ /dev/null
@@ -1,152 +0,0 @@
-%\documentclass[pdftex]{article} \usepackage{hyperref} . 
-%\documentclass[pdftex,onecolumn,11pt,oneside]{article}
-\documentclass[onecolumn,11pt,oneside]{article}%seminar}
-%\usepackage[pdftex]{hyperref}
-\usepackage{isolatin1}
-%\ifx\pdfoutput\undefined
-
-\usepackage[dvips]{graphicx}
-%\else
-%\usepackage[pdftex]{graphicx}
-%\usepackage[pdftex]{hyperref}
-%\usepackage{type1cm} 
-%\fi
-%\pdfoutput=1 
-\usepackage{color,graphicx,shortvrb,epsfig,verbatim,tabularx}
-\usepackage{url}
-\usepackage{hyperref}
-\urlstyle{sf}
-\usepackage{fancyheadings}
-\usepackage{program}
-\usepackage{ulem}
-\usepackage{amsfonts}
-\usepackage{xspace}
-\usepackage[english,francais]{babel}
-\pagestyle{fancy}
-\newcommand{\trtitle}{Drakfont\\ fonts importation for mandrake linux}
-\DeclareGraphicsRule{.ps}{eps}{.ps}{}
-\DeclareGraphicsExtensions{.ps}
-\renewcommand\star{{\ttfamily*}}
-\let\package\textsf
-\newlength{\gxlen}
-\settowidth{\gxlen}{\package{graphicx}: }
-\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}}
-\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}}
-\MakeShortVerb{\|}
-\begin{document}
-\title{$Drakfont$ fonts importation for mandrake linux}
-
-\begin{figure}%[ht]
-\begin{center}
-%\caption{Exemple d'image}
-\mbox{\epsfig{file=mandrake.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-\end{center}
-\end{figure}
-%\begin{figure}
-%\begin{center}
-
-%\end{center}
-%\end{figure}
-\author{Dupont Sebastien \\ sdupont@mandrakesoft.com}
-\date{05/10/2001}
-\pagestyle{myheadings}
-\markright{\scriptsize \trtitle}
-\title{\bf \trtitle}
-\maketitle
-\section{drakfont Future Overview}
-
-\paragraph{Fonts import :\\}     
-\begin{itemize} 
-\item pfb ( Adobe Type 1 binary )
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item pcf.gz		      
-\item Speedo		      
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item and Bitmap (PCF, BDF, and SNF)
-\end{itemize}
-
-
-\paragraph{Features}                
-\begin{itemize} 
-\item Install fonts from any directory
-\item Get windows fonts on any vfat partitions
-\item UN-installation of any fonts (even if not installed through drakfont)                
-\end{itemize}
-
-
-\paragraph{Support}                
-\begin{itemize} 
-\item Xfs		      
-\item ghostscript \& printer 
-\item Staroffice \& printer  
-\item abiword		      
-\item Koffice, Gnumeric, ... studying
-\item all fonts supported by printer
-\item ( aliases by RENDER in Xfree86 .... -> later )
-\end{itemize}
-
-
-\section{Window interface:}
-\begin{itemize} 
-\item
-\item Fontselectiondialog widget
-\item Command buttons under Fontselectiondialog (like the actual frontend).
-\item Commands buttons:	      
-\item import from windows partition.
-\item import from all fat32 partitions and look for winnt/windows/font
-\item and import all (delete doublon) but don't import if already exist.
-\item import from directory     
-\item look for if it exist before for each font and not delete the original.
-\item (replace all, no, none)
-\item expert options:	      
-\item ask the directory, and look for if it exist before
-\item if it exist ask: (replace all, no, none)
-\item uninstall with list per font type
-\item Expert additional switch
-\item option support:   ghostscript, Staroffice, etc...
-\item check-button. (by default all check)
-\item Printer Application Fonts Support...
-\item check-button. (by default all check)
-\end{itemize}
-
-\section{Command line}
-\paragraph{Font Importation and monitoring application\\}
-\-\-windows\_import : import from all available windows partitions. \\
-\-\-strong         : strong verification of font.\\
-\-\-install        : accept any font file and any directory.\\
-\-\-uninstall      : uninstall any font or any directory of font.\\
-\-\-replace        : replace all font if already exist\\
-\-\-application    : 0 none application.\\
-                 : 1 all application available supported.\\
-                 : name\_of\_application" like  staroffice for only this one.\\
-				      
-\section{Graphics}
-
-to visualize the conceptual graphics please see:\\
-drakfont.jpg\\
-drakfont\_install\.jpg\\
-\& drakfont\_uninstall.jpg\\
-
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_install.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_uninstall.eps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-\end{document}
diff --git a/docs/drakfont/drakfont_install.jpg b/docs/drakfont/drakfont_install.jpg
deleted file mode 100644
index 795a5a711..000000000
--- a/docs/drakfont/drakfont_install.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont_uninstall.jpg b/docs/drakfont/drakfont_uninstall.jpg
deleted file mode 100644
index 711f28e77..000000000
--- a/docs/drakfont/drakfont_uninstall.jpg
+++ /dev/null
diff --git a/docs/drakfont/mandrake.ps b/docs/drakfont/mandrake.ps
deleted file mode 100644
index 1af9d5bb4..000000000
--- a/docs/drakfont/mandrake.ps
+++ /dev/null
@@ -1,534 +0,0 @@
-%!PS-Adobe-3.0
-%%Creator: GIMP PostScript file plugin V 1.12 by Peter Kirchgessner
-%%Title: /home/seb/drakfont/mandrake.ps
-%%CreationDate: Fri Oct  5 18:28:29 2001
-%%DocumentData: Clean7Bit
-%%LanguageLevel: 2
-%%Pages: 1
-%%BoundingBox: 14 14 424 84
-%%EndComments
-%%BeginProlog
-% Use own dictionary to avoid conflicts
-10 dict begin
-%%EndProlog
-%%Page: 1 1
-% Translate for offset
-14.173228 14.173228 translate
-% Translate to begin of first scanline
-0.000000 69.000000 translate
-409.000000 -69.000000 scale
-% Image geometry
-409 69 8
-% Transformation matrix
-[ 409 0 0 69 0 0 ]
-% Strings to hold RGB-samples per scanline
-/rstr 409 string def
-/gstr 409 string def
-/bstr 409 string def
-{currentfile /ASCII85Decode filter /RunLengthDecode filter rstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter gstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter bstr readstring pop}
-true 3
-%%BeginData:        29637 ASCII Bytes
-colorimage
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-bl7e@q"4E6s+13Ds*t~>
-bl7e@m,@els+13Ds*t~>
-bl7e@T5=@Ts+13Ds*t~>
-c2RqDnG2D<JcC<$U&TW~>
-c2RqDl/9_PJcC<$U&TW~>
-c2RqD]71%QJcC<$U&TW~>
-cMn+JnG;n/i;S<-JcDJEJ,~>
-cMn+JmbuTmh#;m)JcDJEJ,~>
-cMn+Jie^A<a8UYiJcDJEJ,~>
-cMn+DnbMk)f)($uJcDJEJ,~>
-cMn+DjkIhQchi:nJcDJEJ,~>
-cMn+DST5n_V>GiDJcDJEJ,~>
-ci47Jn+l_KeBdl?s+13Es*t~>
-ci47Jkhjh)WP\C\s+13Es*t~>
-ci47J^4K&h%!hSus+13Es*t~>
-d/OCNnbW%Rn_2+VJcC<$UAo`~>
-d/OCNn);p@^TP0>JcC<$UAo`~>
-d/OCNj+q1n%LcV6JcC<$UAo`~>
-d/OCHnG2eMo&%LUJcC<$UAo`~>
-d/OCHjkS+u^p135JcC<$UAo`~>
-d/OCHTl`:/%Lk8_JcC<$UAo`~>
-lMgqbp\sLY$2s;fp\"1NjN$P:s+13Es*t~>
-lMgqbp\sLY$2s,He&K8A[BAeGs+13Es*t~>
-lMgqbq>T^[$2r)%;B-/V%3+S`s+13Es*t~>
-li.(dk/mMerri>mqY9a_oE+4!k(3P`s.]OD~>
-li.(dk/mMersJbqin;Gk_SWgdk(3P`s.]OD~>
-li.(dmFhC'rsJbkMeO[R%M'!Pk(3P`s.]OD~>
-m/I4fjeV8=m/I1an+l\UoE4C(gAQU&JcDMFJ,~>
-m/I4fje_>>m/I4bjk\5#rk\cKUso9ns+13Fs*t~>
-m/I4flbMl_m/IIiWH^N?%Ls!Y%&s2Vs+13Fs*t~>
-mJd@ggl^4WrU'UfrU9RVp&4Lbm*a;WJcC<$U]5i~>
-mJd@gglg:XrU'UfrTiCk`r3aV];N^FJcC<$U]5i~>
-mJd@gjg<_0rU'UfrR6L%+8lZO%1J$fJcC<$U]5i~>
-mf*Iik)["5qX+:crq-'^p&+Famb#_TJcC<$U]5i~>
-mf*Iik)d(6qX+:drq#.'b/=1p"21eLoR[$ns.fUE~>
-mf*IilEnChqX+:drp>Y\/e\'l!Xrf8JcC<$U]5i~>
-n,F"!nYD2sp&>!hp%nOYp@\.TrV6BpqX41Qqt(!\hT52;s+13Fs*t~>
-n,F"!nYM8tp&>!hm-F!$l0Rm2rV6BqqW?VZ`;IIS^p(69JcC<$U]5i~>
-n,F"!o>7BVp&>!h[uQH0T!cSkrV6BqqQkK3(&JIB%70K7s+13Fs*t~>
-n,FI)^NR3SrVuomhY$U:q"X[\qY0^VpA+[ds82B`p\"CT!oq>fJcC<$U]5i~>
-n,FI)^j!BUrVuomg;hIdf%Jg6kNM-qn+?PWs82-AeAqF&!jo2uJcC<$U]5i~>
-n,FI)d@e5>rVuom_BM'9>A8)$G_hZm`nC%as80]m<Zq5K!Y$ODJcC<$U]5i~>
-nG`[jf8YC8q>UBuqVJd?m.L&NpAajeq#1!kp%eIZp%e4]kKW1@s+13Fs*t~>
-nG`[jf8YC8q>UC0qVJQ`]>_n8c-Xnhg"Y?>kiqElf#bi+_?.6OkCNYas.fUE~>
-nG`[jhm8^'q>UC0qVI;C%2gQM4%)eE@rZaAKVFlk?7QZc%Kd4N"m:I:JcDMFJ,~>
-nc&gmm]UN9m/I"a#6+8C]\r,HrUg-_rq??c!VZ3]oE4O8iVnE.JcDPGJ,~>
-nc&gmm]UQ:m/I"a(&mjRYd1mV_SX4/`lQ?JcdC7lcH*p!_?7KSh>W!*JcDPGJ,~>
-nc&gmnApp+m/I"a(&mjRCCL^_%M'-d*@NX&6:t6X5:%$?%Km:P%*&9ts+13Gs*t~>
-nc&dibD(8oq>C6srp\(Nj6cI(oE4^PjnOE,JcDPGJ,~>
-nc&dibD(;pq>C6srp\(:[(O6N_?7]o`5D>d"2VXrpjrHrs.o[F~>
-nc&dif<14fq>C6qrp\&r%J^M6%g3L](D78P%KT)pJcC<$V#Pr~>
-o)Apnm'1H"lMg\\#6!f&dH0iglLY2OnG*"XrsA\uq"XjgqtB^[JcC<$\c70~>
-o)ApnmBLT$lMg\\#6!f&\@0,fm(rqD`5^X+rqQL"rpo1Err;l[jSON.JcE:\J,~>
-o)Apnm`LrrlMg\\"T@T$+q<fI"VDOmC#f3frsA\WEU3W(qji66JcC<$\c70~>
-o)Amjb*?Map%eUlqr>9CjmVg,oEY'_p\"4Rr;QWo$2s&VmeZnNp>>Uqs+13\s*t~>
-o)Amjb*?Pbp%eUlqr>2i[_BTE_?e'"cIM%Anb`=`rsAYegtV](lHe5ZJcC<$\c70~>
-o)Amjf"$U`p%eUjqr=df%I4K1%hp3M>Ci]roD\[f$2s$mBDVSN(rc6#s+13\s*t~>
-o)Am`[;pHKrV6BrptE13kO@d/(%q:pq"X[Yp%\Lcs8M65p?qSEe(skOs+13\s*t~>
-o)Am`[W6TMrV6BrptE!V\A.@H(;n2:dFR%+k3DR:s8W)^b0fDEf>-5=JcC<$\c70~>
-o)Am`bFssSrV6BqptC`;%I4K?%hp-C8mQ7RKs0)+s8W)^Q8?5H>YX&NJcC<$\c70~>
-oD]!me>?o:lhCD`rq+[OhWjXqo`+Uap(-omq"aUUq=E"uo]5Yem/DS9JcE:\J,~>
-oD]!meYd,>lhCD`rq+[DZ+@a9_A'o,aNMlWf%T6KmIg(uccXqbaR&nWs+13\s*t~>
-oD]!mgr,DGlhCD_rq+ZT%1VS4'b:op,r7b[?>XPE\DZu+?7Vct]^5WKs+13\s*t~>
-oD]!f^6W?3nb2terp\+KipH=!o`+Uap($ilq"O+(guI)Go(DbUrdk*#s1JA^~>
-oD]!f^6`H5nb2terp\+:Zb4-;_@si+aNVuZf\>QHa2#=.eDfTZqu20HJcEC_J,~>
-oD]!fcFJk?nb2tcrp\*'%H\-7%h]a,2F:;PDg@Us1*L+oT;9Krrdk*#s1JA^~>
-oD]!]YCC#np\"OjrThAHk3qp%o_nFnp@?/4i8NJDeEQYKc-"5QrlP;YVY^&e!rCEmrQ58a`3ciI
-d/OCNp#k&U\;/o>h#@ZZp#k&V\rFr4iVs>cn`8KObf\)MdFe!gir92]puU2Tbl5cb^&\&$s*t~>
-oD]!]YCC#np\"OjrThA1\%]]>_A'o-aN2ZXdCHg.]=keag\&b7bKS30b6#MWqY1!kqUNslb6?&0
-`3ciId/OCNp#k&U\VT)@h#@ZZp#k&V]8k/7iVs>cn`8KObfe/NdFn'hir9DcpuU2Tbfe2P^V9T9
-s*t~>
-oD]!]aJt!3p\"OhrTh?P%H@p+%hp!3-mB]:J%7BArWNL]p"S9UgY;_]!n>*`p\t<kinaRe"PMAM
-b59Qc#laScjPJ7fjo4'8#laScjPS@lgAU"1%0#nbjk\\Fg=b?Co`!kM"oe>aj5&JhgAfS$qjmb;~>
-o`#-pfr/arg&(FA"oIDohWO@goFpf^hTE^[d+I+3\@B)hioYiBMk'a<!fM0fq#:d$hS6+`T:M*e
-C1Mkcdf0[Qg;:S9ZD;SVjSds8$N8Ym]Xb>FH>(\%jSoMbptsB7]<eK2rgs@hW2mGdrT4%`rTDG@
-ZDXGrT)saenX]]1~>
-o`#-pfr/asg&(FA"oIDmZ+.O/_@s_sYb@bpYJAE'\@B)hioYlDMk'a<!fM3gq#:d$hS?1aT:M*e
-C1Mnddf0[Qg;:V:ZD;SWjSds8$N8Ym]XkDGH>1b&jSoMbptsE9]<eK2rgs@hW3!MerT4%`rTDG@
-ZDXGrT)safnX]]1~>
-o`#-phSl(>g&(FA"T.;a%1V;,rs]MI#nAC@F#gb?\]3XkXJrM=rP&E>SaH4P%/o8;a1oC'[\K.H
-S+>#-$N9&:eC)RXUQ4F6hZ!r]j3uH'bep?>eGA8+#laY_hUg0!`PMPg"iA7"cKP5grs&Ggh:9`f
-_>_1NY+"mOs*t~>
-o`#-k`1LULi;W?J"o6r`jR)O$oH!MhhT2q%V6%_Zamms?io]goWKMCCDf9T7A7i^Wq>Uls_PM^#
-EG/W[H],6!df0[K[s3%5GACN#iVq^6$MV#aF)?#9>[lFajo6"lim#-6Ob7puCMe$3G'nq%P-t2M
-rseqc_lA`EF(f,p@pNR+qYpZso@s5Bs*t~>
-o`#-k`1U[Ni;W?J"o6r[[Cj?=_B$G(Yb-l2RA-dea2uK^io]goWfhOEDf9T7A7i^Wq>Uls_PM^#
-EG/W[H]5<"df0[K[s<.7GACN$iVq^6$MV&bFDc2;>[uLbjo6"lim#-6Ob7puCMe$3G'nq%PICAO
-rseqd_lA`EF(f,p@pNU,qYpZso@s5Bs*t~>
-o`#-kd(bp"i;W?J"8U`5%HJ$!%2'$U$Vu+1*4lc6i8Wnik-LYHT`1PdTU(S\rV?I%p=$pYT:h[3
-H]"0#n'_4CpW&ntT;8$8L>i-grsJMAUn"!NSr/*QqrRhkr9<%c`3ueET:MRGTqnTfZa\-TkPl"i
-kL[_[W1f]IQ'I8]k5,)[rq>LQW;hA~>
-o`#*d[?tH4iq!*Orq+U^kO]kem,#gfX.uc3c/-+Vg@4Y3s8V`JaII`jBOk^aA?5P&rseqYZA*4-
-An"tc][5[4df0XJgUa)+DIZpqkM?.FpYNZaKQL^.E9$r[rtYF__PW-/@pN2?>?b?@A7fLoF`b+j
-kl1kZ]qg0nA7#49!`N1[rVm*#m+]aaPkD!TJ,~>
-o`#*d[?tH5iq!*Qrq+UM_o(`U+2GLmT8\SmWkcK^ZHL,*n,E@eo\RZZIq35'An#;Pq>1+#rR\?0
-D.R<g>][R)iqLn$$2<2cTmU`f>^5GfrsJMW^Sup0@p<p4roX4qqq/c_LiHp1=B\p5>[_/TBQ/*:
-\,>Ii%J7B1J8/V$='/O*;cr&Xrs&Gggrugaor.n@~>
-o`#*daL[Uhiq!*Qrq+T=&eX=;rs]qU$49S'^m5IRb>Su4rr<#jhT2duQC+#+P`30KqYq$'hor9p
-R$j.jL:kmmpX9'JpY39ST:_@%Np#6u$MWDlWLorNKS\[fk5Q1nimu&PTTkChKS>2>Od;B(T;/.&
-r94.io[1OUS<f1eIXHKcG2iK##6"&QgW-\oW;hA~>
-o`#*_Y**4%ipm$Orp7u)p$;5no'G5SYcFP#`80S<da$mpg!]Zqs8DcYY`!(2BkCmdRIp@U%J7;r
-C2Rg"@9\fPp%n[9rsAYqkKfKE@U+lYh>[f[o]t&"L1=JFlK8*_qpN'DH"C;]<*!I??<^cDA7fIh
-AT[29lMhb#f;aXCARA><Dg6PQL$&F8rp%YE[[qAdm&9r7~>
-o`#*_Y**4&ipm$Orp7_N`p:Jb^q6hCN/3h#`80S%YKl1M]Wh22s8DcYY`!(3BkCmdRIp@U%J7;r
-C2Rg"@9eoRp%n[9rsAYqkKfNF@U+lYh>[f[o]t&#L1=JFlK8*_qpW-EH"C;]<**RB?X-rFA7fIh
-AT[29lMh1hf;aXCARA><DuP"jL?AO9rp%YE[[qAem&9r7~>
-o`#*__mY_]ipm$Orp619+6j@9%3>la$;[D7h<&&XcK!"r-M[W@rV>`pZBLK>R$E]4o_SRso[(%8
-R%0S,JXtfnqYnqC$2sJYcaTp<K:M;arsAYrld`SMP_,=gk5Q7phU/s3R#QQ;FaJO^I"dTHR$jJ2
-Rd9t<rsAY\`iu#$O*Z#%reLuJk5YJ\mb?C>^7Lk]W;hA~>
-o`#*ZUkW8cipcsMp"fB8mIV+`m,#gfX.uc7h=(70ftQD>j2T+,rVm5nY_6SBEG/onK^em=$iSSQ
-AoDX/BO>#Io$.1>roKu.@9o]!gA_B@WJ4hdV"!RI)#`C(R!*(K;HJLGZF-p8L1t./AnPUc]DUso
-)>M+?H=pbn?DG-N`Pp?ss8VuHXd"9O@X..9s*t~>
-o`#*ZV1rAeipcsMp"%[8mD9RQ]<IodLmP-[h=(70^o$&bj1r.lrVm5nZ%Q\DEG/onK^em=$iSSQ
-AoDX/BO>&Jo$.1>roKu.@:#c"gA_B@WeOqfV"!RI)#`C)R!*(K;HJLGZF-p8LM:70AnPUd]_q'p
-)>M+@H=pbn?DG-N`Pp?ss8VuHXd"9O@X74:s*t~>
-o`#*Z_lo/TipcsMorV=Eljj%)&ISpQ:SPe`n,)Q69AoU*Sm:^^rsJ57Xc8[=R[9,,nGE4nrS5>X
-Od;]1Ne"S/c2S%Jjhn-]K!+Xtrs%],YE=C=nE9fgrT2G=UmR0gG)iE)[BQToO-H$"R?WcQr9F;"
-ps6[OR?rbYV7X[b`ROGXs81Tm\#Gs[PNf%GJ,~>
-o`#*USpk'WipcsMo^2GHmdq7aj3"U,UTDDin,*+anBoYPs7bI*nbrIpl)/<.WHrAm@s759rsSJ2
-I:ACfH"^Ghc1oQ`#Q</JHsU*ip"TKOrR.Hg?!Y;?kPlCl^8$'h@ola#aP>qAk2+1GFD,9!@UY`"
-lMhao^RTFYA7Bc1lgXH7o_\[gps#U\B4YY(l)=W4~>
-o`#*UT710YipcsMo\e<Am_T^R[@rP8Q`A![n,*+anBoYPs7bI*nbrIpl)8B/WI&Gn@s@;:rsSJ2
-I:JIhH"^Ghc1oQ`#Q</JHsU-jp"TKOrR7Qi?!Y>@kPlCl^8$'h@ola$aP>qAk2+1HF_GB"@UYc#
-lMhao^moOZA7Bf2lgXH7o_\[gps#U\B4YY)l)=W4~>
-o`#*U^T!9KipcsMoS[$&m1'g>$OR5:U;YmVqu6WbdF%F_pYacqrVm5h`LVjeVOa*;PjJ;I$hVcD
-Ln(08RYu[Aps&gDrS#,eNe"q<g]%NWg;9eIJ&_3FrttFU_PirgJp*g.gudh_hT2LdS!f\/M6-I:
-ru(IQ]q_!^O-@uWnF?&@qu?]ke&%uMR$+!(W;hA~>
-o`#-TSpXpVgA^[C"T@]_p\""I$M!,kX.uc7h=(7?rr39#nF?DUrqQ0`rr3B*gRr(l_2W\Q@;"d$
-rs\kUW+'bVOa^kHB&<L2rs/AEVfl9Mg%sJ'#Pc0+F'E),qrn%trnXZ6D.[6aLXGVgrr<#sm`B`\
->$>!/P4JSO$NB_ai7ci8j6?C=rVn,AnE]E#]pj(TASZtFkNV-or9Wb8k/F0@AnGb*cfjZYk3)`H
-s*t~>
-o`#-TT6t$XgA^[C"T@N>dDbRk$Ga!9LmP-[h=(7?rr39#nF?DUrqQ0`rr3B*gS&.n_2`bR@;+j%
-rs\kUW+'eWP($tIBAWU3rs/AEVfl9Ng%sJ'#Pc0,F'E,-qrn%trnX]7D.[6bLXGVgrr<#sm`Bc]
->$>!/P4JSO$NB_ai7cl:j6?C=rVn,AnE]E#]ps.UASd(HkN_3pr9`h9k/F3AAnGb*cfjZZk3)`H
-s*t~>
-o`#-T^Sd0Lh#?mE"T?Pj8f@%,#n77L:SPe`n,*+`rs8Jjnb`@cq"=O`rsSh_^m'YkXJMAJMs($<%
-/o#$Nf(?RWL/KohYk_!#PlogUksTSqV2#Tps-RHLk+4Vkl2P"ilJBrR?NDkdI@&4s8W&caeauPL
-OslIo)8RqrqGmFjQ#7bn,!%^s!.O8nF5Vd]qLj]S#+d)n*KQAnaQ&6d_hlKR@9u)mdKW2mf'BhJ
-,~>
-p&>9rfUI1qAAA*6rr_uaq"=(I#jTO4W5RN\qu6*b%/\5;@X67aIVN;&b5VD?%K>h.I9iVgS:>$Q
-E97)srseu&j4W#8g[4q*f#-ePrVm?+nD;IBrVulhiRu`LrqQL&rp\gma3WGQSnqYIiVrfU$iTGD
-a6`g)o\S-WrVQU'rTr7if@K0ao\.C>rVlg-o=(-$>B&X%s8W)nimu]Zq>V-,le:"AlMgh`q8/\K
-BP(dkW9sT^rr`5OC0CL:32Q3Grq"sk`4`U`XfSb5[(FcZrr;`7_S!FWKl(F7COr.a[$dWS`50!q
-Y)I=3B52a`ZFI90PP;6[J,~>
-p&>9rfUI1qA\\37rri&Tfuh5$_?d`GLo&&Gn,*+Rrs\eJS76chQ@<RWB$1,Prsetr]7!t[aII`i
->B/d(r;R6*puL,ZfA#]jm+92@rr)j+rp\difDYaKo\nKRn,E+^%K>kSdE'\f^7T4HCZ59krsSel
-f>m7Wrq,'tir/cS!r_K>rmqA<rUegbg&:pM&+d8uBNoH9rr<#tpu9oVrV?I,rTi4kf'<87s7sR(
-H>$o$D5ck$r;Qltf5"Rg=?*/Js8MWGcG[H+YcY"3['dNop&>!cb/:m&VhJu"B5<*mZa?0pm)?fO
-]!%'3AnPk)S[,f5R[!QLs*t~>
-p&>9rgq9PJM9,Ydrri%ZC+^+e%L<LO$BrEan,*+Rrs\eS]T/*!ZDj@WMUDG&rsetsc_uAqb.Xg>
-KSegir;R6*q<I#!ioT_.nD`!err)j+rq#=.ir/oVp?CVroD\Ob%K>t_hUpZCcbH$,L#N%0rsSeq
-in3f#rq>O6lM^V[!r_WLro+.MrV#=)jSf)X&+dlSRtQUXrr<#tq<Hu!rV?I,rUAn.iU?dGs7t$U
-Vja$?QaH/Zr;QltfoULXFuZ\rs8M]Rh:U3%b/hWGc-=Vmp\t3eg"4[!`N>`"R@UCobg!f8m+Bn9
-dE/\dR@0SC^<FsK]X.@8s*t~>
-p&>9qe<bGiA\.^/rri;fq=jRMoEO?eX3pA4rpKdpp:Z]!N7jqXD.7%`qYpL'qp)$GD:$7nHsp9;
-li$i-rqG-bVh9;XWO9ORQuhZnrpJ^ob/:HB[J'1A`k&CNP0Nt&ruh:,e%:laFG6?XK4J52kPk5<
-g!RmUUOqY(gr[+(Ls#\qrsnq`b-[7VNMEen_5D=oqYpL+m]_pd>`%bGs8D-*^8cn'rVca4rqG*\
-UR%RPTs=LpoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfH+UlpI\G'/(ZK85MVUXoD3Z^lo'H#IA.
-B52C3Jph<eeu=peJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qeX1VkB"Rm1rri;ahU9C2_?RE4UXAN,rpKdpp:Z]!N7jqXD.7(aqYpL'qp)$GD:$7oHsp9;
-li$i-rqG-bVh9>YWO9RTQuq`orpJ^ob/:HB[J'1Aa1ALOPKj('ruh:,e@_)dFbQHYK4J53kPk5<
-g!RmVUP%_)grd1)M9Gksrsnqab-[7VNMEen_5D@qqYpL+m]i!e>`%bGs8D-*^T*"(rVca4rqG*\
-Um@[QU9XUqoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfK,UlpI\G'/(ZK85MWUt5M4[%3#(H#IA.
-B52C3Jph<feuG!fJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qft+#DNPkS`rri;GI7tRI%L*@LG1#aTrpKdpp<0q%SCt?PSs,,KqYpL'qq8lGL!\,[W02b$
-li$i-rqPR,`2olF`Qm#^\sr*crpo:3gXjTRanGAcg!Rs[\(^fXruh:0i6o0.Trl)DXHnR#kPk;D
-j58S@_Q2qsjkJ/#Yh8pRrsnqigWd+&Zbjr8e\n',qYpL+m_u]%Jskp(s8D<?eAeW;rVca,rqPO'
-_R[J$_9)TSoYn85rg<nYWS.(GrVlruke@"p3O[W8qrZY\_R?YIUnaccXKT%E_;Y@\aM+mZV4X3E
-R@BhGX/VG]f#G5%X/DV[R@0P9V5p_tQ^[?Fs*t~>
-p&>9qh3`IuAXiDbrr_rbq"=%H"QI&9o)A"U*:U4g@'&CoM/d$8Re?^\rp@4;=eXcaRs8=HV""B`
-,Q6oOY@q-TL6-A%LjW]Uk5P%GR[TP$I!M[1Y`jQ^I!fUSo_e_Fqq]5`?s\8GL2:U?@9ecXrRd?u
-QBI#DJ()9=P_4-kL%YKFp!UC%?<qlDE-@"k@q49irr3PoWJFtfV""E_i5)4IFCTpprr4)=jN*g$
-D1d%QHuQ7cnZ7LaAnG^mH'tnN`mNB$me,iCi[s?cpsm0RKlLX0=^#'8?=RSaG_1XmkFcNo?"%;V
-An>FX>?Y-1Gg1_G>$PKHralFG?X-c<=BBS.Y5a"~>
-p&>9qh3iP!AXrJcrri#Ufuh5#_?@3>b4>PuruCO6LL@4DZANX3A"3/ks8MDqFBYBr\XRhO?DR)i
-s!.L-bcb\bCPIpiI#*/[G38esTUVC9N-orM`j(_WH$k!QI.[@:1]-"IT3tuSP_O!hCLLJ,m/>S$
-PEqAeEe)WUY`sc`AqfpXrq4^MJR2W/QuR;)L1=cKqYpL+l)KPJ?)6uirSYPgMf`H\o`"k4rT)%i
-AT!0GEdVi/qsgbCDe<TpCjDGQ^W+[PkjJ-.rSfElo_?tPTnRJs?<LH:>[CoPD0UYebNGR5>[:cL
-AnGU`?<^T8=*`&@?s6fDAH$0H@p`JE>$+jJl)t&:~>
-p&>9qh7BGJO0/-Irri"VC+^+d%Km4Eb4>PuruCOJYD'@D^TaArN32dQs8MH3UO9'!ah4I3K!+VB
-s!.L1grc+;Js;grVm*+\O66H7^q@=jZ`'b5eB>>$V5L5[Sb2j[1]-:d^Q<o(S=,b7SW\Vqm/>nQ
-\%/rNTr-Gkb.+RLPbIdMrq>6rX,)+]TUDUZYEajsqYpL+l,KrjJZeMBrTDbLZ(mDOo`"k4rT`+M
-OGT3hTr=U#qshD(T:)+9SYj!@e(<I8mIKr7rSfj#o_@Cq_6'AqNJ3%>LlR^eSu&Kjg#oo6Mi<gc
-R@0G,NerOFIZr$VOGJgWQC+)-Q&gfYLP:29l)t&:~>
-p&>9ri0S\"A;0RGrri;fq=jRLoE4*fhYld?6gCXi@*J&VNH8W?MXg`Hqok^>C=;@PQZHJ=](Q+'
-rp%Lt?rMQ_`P77JBOP/&l2U+CMfW]JAS$."@r6'lA7f4[l2CX3qprKA=]_$-c+SaGB4,#@nb_+7
-M/R3CCN#8KEbJrj>'B93oZXOW<,AJK_jGIX@p<^+rVuosf;*h$?,H=6hQhEB?sHc`mJm4bi5(4Q
-EjE?WHZ!A@o('&0AS#IdBP_jEO-ucBZ*q3U`p!F%s81?YR<W=O<Duq-Am\kN&Rf6aDJsd;KO7ef
-@q'%^@p2q3<t'#lAm/8?A79%]AR/=6<rm7(Y5a"~>
-p&>9ri0\b#A;9XHrri;`hU0=0_?70AhYld?6gCXi@*J&VNcS`AMt-iIqok^>CXVIQQucS?](Q+'
-rp%Lt?rVZa`P77JBOP/&l2U+CN,rfKAS$."A8Z6nA7f4\l2CX3qprKA=]_$-c+SdHB4,&Anb_+7
-MK!BECN,AMEbJrj>'K?4oZaUX<,AJK_jPRZ@p<a,rVuosf;3n%?GcF7hm.NC?sHfbmJm4bi5(4R
-F0`HXHu<JBo(')2AS#IdBP_jEO-ucBZ*q3U`p!F%s81BZR<W=O<Dut/B4,%P&Rf6aDJsg<Kj\"j
-@q'%^@p2q3=:B/nB3SJCART.^AR/=6=93C*Y5a"~>
-p&>9ri4>bPOe;19rri;8HV,1C%Kd.DhYld?6gDU_K$Nf-Z_<_HU%/0_qq&W>K$ro&\tP+6_"Ia-
-rpACTOEHPj`P8(;RZ`8jl2U+TT9u1=Q^+/*LkgkKQ'm\hl2CX$qr-#2L3B3*c+Td@R?3$'nb_4I
-SX,h7S=?^MQBIJoJro?up"[`^H\&04_kiuoQ%k"NrVuosh8?4OJB%<]jijTgOG\IOmJm4bkLHeg
-KsJ@mVk0*@o('PkR$a;0R[p7U[(F2obKeJ^fC&Y<ruh3rdCZ6COFVLsH[U3kM34-nStDk)UOdT>
-N0K]tQ%s\aFps/NMgBPoMisHqQ]-:hFodB_Y5a"~>
-o`#-UP]^SJEpNAts7??ep$D;Pj2'a@s$ZkAU1IrnpXt[MAn6;Vs8MDpDHa4-l`?4a>@#qYs8MT-
-Uh!JR`T-LO]o6r=>bplho%(RBIqiCm<HOn>XaY%t?!u^ls"s]2]Tc]&S^Zrtj/n,S?<t/8rU&.L
-P(%.V@TRN?IUlARM<ju\Z$BA\]%ZT=bE7$Y?%_A?s!RZ_T6+:JgA'O+AS-3k;,aC]s8ColO^)V7
-i9Sg_H!=\@pX=Lu@:]@L6"akGDfpAVKo(nYS%ALrl+*7-B44b;GbVLOYFBWC@qB:fBnaC,WMYDh
-BP(^[H)@R?YKGP5WMueYFD>Du?YQ>8W<09Gn#l\@~>
-o`#-UP]^SJF6iJu"SCd-ai!M_!jnlbli0BPgnSFnhY5]cF(Ss2mJm1Q[r,BQl0GF5CKk,uqZ$Qc
-`2$pDIDt7:kIupq?sTSts74aUQ[`aY<`X@9ZE8UlAmJj*rr4hRhS#.Z=.Rh,o]**2D-gP[p&4:.
-^6="\A7AY\T7:BM:l=T7bcuFoA\-U`m)tQ:@U4WMrr4AB`h.?WA_Qq9XCZ!i>#A4rn,N@F^l_l9
-^>S>*T6XXLl1`YT@:<^GAjL'CC2\6@J;&iAR%1bbropt^G\:Ga;L,"B[BH'B@Uit^C2&C<YGnCS
-E+iim??rEIWNXIt^T"31P'(MOA7')Iri#t&b3uM5J,~>
-o`#-U[\T=SPO%l@"S@FZ.M;%X!Y#=mli0BPhnbV3hY5^3U6q+2mJm1Rc(B?gl0H9rSV_jLqZ$Qd
-f>Eo"N5aiIkJ4BrO+FJ's74aUW2c>LJ9QgEZE9[fR#H[Xrr4hRjO:SrG,*OQo]*EbSrJ99p&4:.
-^8S$$QAg6HTotC_ELH.gg<6=BICe/#m)uW0PD,:crr4DCdD)H4L"c=`a-)"2J9>q:n,N@Le[C3_
-^>S>*];CF;l1`YtO-,crrg?$?S=cRSWi`M5]"H>crp.qDV4!KrEJUEr[BH3^Ng,p!S!g%fYGnCg
-T:;74KnuV*WNXIt^T"31S>)L@QAU6hri#t&b3uM5J,~>
-o`#0XQ?d.RC=`CXrr`5dq=a^X#P.6Ah:prSnbMeYji6<Gs*X^eS76L"rSWl_B4,B:s81'6??Olp
-kbj/H>\i<ts8'mAH<=RmlhpeYbaWf_?,?77r:T0RP&"9(NPF*,fq*h.>@QXms8MN%Tk.;IdI[A;
-oXpN1>@#qYrqlBKViGOu<-5k$Z=$^Xbja>pN*KGaiVEKOiLka1>F"XUs"!`PRr)P[i7t\PD5jp_
-B:%6Erp[^p@9KJfqu,0MEE[;BrTCV-?<UZD@qGOL3bN,AF*`26p!9XhC1LLJLVhd-kiC=+Iq`J+
-BObeoj5S[aL2U[5?]*IpioKLtl/L^YZ\rm:A7'B*ro+"?mJ=!cJ,~>
-o`#0XQ?d.RC=`CXrri;^h9a+<_?[lg['-X=]"n-Y!k,,gli2A0bFN*_jo+,%G%Y2rl2UY*TO2lo
-punZ2AR'$0rr;i<YBj;Z_s@7#q95@Q?=(MBs8;QOY**R)=H1)Ijk68YAm8d*s8W)f^7f+?Fj]g[
-s7EsjEEcc&qYpBbj/@uR>uc!\d'@(]H-Gd3[u=QoWo<dQrSaH$@9f)crr4M@\XRGDI,NeeB5X`W
-EbLilp\sZtSmbg"j88f-YAm`bjo+ANE*c^S@:NmGAiaR<CNFfKX7af>JSJ_!<JSHFk31mW\pnF*
-AnY[i_W0Y-Tn[Jt@UG#Eio9%do',/nh6`,^An57idf/5-jR)fHs*t~>
-o`#0XZDF%TOkTg.rri;6GXNAF%fQn=$k3[@%K[(Cip6Vlqp`<?MWOfp[%s+OMs:9=fYE<!fD+RK
-YEt#uiVrlRfZL+DHc,1Is7t*VUlBoEpAb'`jhS?rLj56#fB(\kXI4lrj8]/Yo$Y@AI>H;Brr;W3
-\Y+e/g%t^Fp#EcnSVqcK^<j<AFc+E4iQnfeGcp$$rr(fjX-/%/mf*5;oZ=b;N0iJ`c'<p^[>9=)
-fD#:7e\@5mXQ03Vh8u@BLZSKt\W)?!NKKHlR/<:3R[p1NVo/2[a/b\qLj#!!g?.V[f".<;R$jD.
-P0)bDf<h]QR?NDqfAbfNmIKN$in_;RTp_4(MphUa!p&bFY5a"~>
-o`#0\SpbBcC8q('s8V]lq"=XY%.`iKfuLG"XLZ^>n+6GK"6[b[rp9Y=p:Z`"MX1<)Q?m4QA^gVB
-[r,BTm/>M0IUZQ1kl:YD[?G'&OQ-0;s7sX)F';l'qu6UAn$/*h>B%aLq>TigP@e$<jo>AXd]\:.
-=gIAms8V`'Rr2JHiVriV+7#tfA63'HjRh6#W5n/m\tE_>E7O^_s8LoOJ6uQaoD\bEn#qskCQ?fU
-NHDegi5i[anbr@/Y'aSseG&t.`0FV+L["j6hQqZ;=^"s4>$P?@@V#IM->.(*HI]WtFCnucBufQ:
-rr;umj0s>IAnPXcTDANWY`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0\T7(KdC9%.(rr_oSfZF-0%)KWdXe(W3Q'8&Q^;9]`"1Y&Urp9Y=p:Z`"MX1<)Q[3=RB%-_C
-\8GNVm/>M1IUZT3kl:YD[?G'&OQ-0;s7sX)F';o(qu6UAn$/*h>B%aLq>TigP@e$=jo>AXe$"C/
-=gIAms8V`'Rr2JHiVriV+7#tfA63*IjRh6$W5n/m\tE_>E7O^_s8LoPJ6uQaoD\bEn$&$lCQHlV
-NHMkhi5i[anbr@0Y'aSteG&t.`0FV+M!=s7hQqZ<=^"s4>$P?@@V#IM->.(*He#`uFCnucC<,Z;
-rr;umj0sAJAnPXcT_\WXY`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0\[&KU_Q+HhcrrhtK@jhld%L<LP$OR1D$4IC>%Kd.J\,Pao0_W]"MONl2k-LqSP)Iuklcu,M
-[d<tJ_5WZQP3DrFkg$Z$I@K6ns8VoA^7pF4gACmL-1Aj`R"U19l1t>I_7,hcM<4d;qqK5oML)_s
-rr<#jah44$L#N%1ru^RG[$H5f\`ED<WN+#'n^"t>JVDYKs8W)W_Q&ZH[e'Lu1@N2lSX6>,e$G.J
-h;HAhf(&_9fZC(LMq%M#maeq,FI27lptiE>I=$HqL51YFO->otrg>(&RAS]_]q_!ZJq:u.qu6Wp
-puAo]R@'D.NjAK\n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#0bY^gP%AUF"BrtYM!q=aIQn`o#X]W8'.Uo1&mdH'cfr:C*SaOC%Qs!@0?Lg[%Js6HG3Cgq%n
-ouW_1FkQTeb+Eug>E%qKqSoF\>[52<rr35r]:3S@DrUcqru1.$M.9eIk5G>[n#qsd>`%bGs7Edj
-C0PN+q>UBun?A-h>^,B1ruh="Vh8A[No'X3o&/HpqV830@9]8err<#sd%GYh?IeiMs$GtLMJI3l
-WL\$Lh"gg9me6VZn[4^#D4p%Yf"HrE;.[o@s8McQa0:YNB4=qD<`r[6@:a%_B4Z"YTnR;p@9eiS
-rVZ[/q:UdLB4b[`MXpf;Y`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0bY^pV&AUO(CrtYLoh9a*W^Ug\GQ&(ZkTr4WYVR=.Sr5&QGT?[9"s!@0?Lgd+Ks6HG3Cgq(o
-ouWb3G1l]fb+O&h>E/"LqT#L]>[52<rr35r]:3S@E8plrru1.%M.9eIk5G>[n$&$e>`%bGs7Egk
-C0PQ,q>UBun?A-h>^5H2ruh="W.SJ\O5Ba4o&/HpqV861@9f>frr<#sd%P_i?e+rNs$GtLMJI3l
-WL\$Lh"gg9me6VZn[=d$D4p%Yf"HrE;.[o@s8McQa0:\OB4G%F='8d7@:a%_B4Z"YTnR;p@9noT
-rVZ[/q:UdLB4b[aMt6o<Y`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0b]W7TkQC[U@rtG@EGXN>X%LijU$ORA5O/J%.$k<%C!t>X6qs=>/nA_\eY42JW[]>s`O3@4I
-]n_Htq>/RTVNHG#m/Qq2`2AK?`Uj*/#PH6PSV;mZrr2p9l,KrlJskd"s8VQ,\<_`7lMpnVbe9O"
-K\-&!rs%u3\=&&2kPkK(ro:quO+!JRqYp'Di:$O$aKUeVVX"0\s8CQbV2BfRq#::Ll,9itTWQ2I
-TTe1,qXEqHrVuE4\t5=nk4.H[Z&!FLb4>T3pZ';uR#$3<G'/"VK8PhYrg=.\T"De@SXGUlSE9_I
-rtG4]XJ2,NQB%[0s7*q4Tp_.$V"+9\#l)]UUm[O-Om/hEJ,~>
-o`#3jbCF>>ASnsUq#CBd'DV7gjOV8SX/2Yr_q3baZ*MsCnGMn\kK)$Fm/JBsWH)@^pAaWdLi?m?
-V;AUk=gIDnot?l=?X0]'s7*C\C0YK.qu6U"n?A-g>_D;?rs/PTUjlcWV"+Ha&F-<R@9]Mrs8M,[
-M.9eHkl1S]#4&4H@pFuZrr3`3dA)"m>f6.3s8DinrqXF(H<spup&=t,pq`M@>@ugls8W)RV1E2e
-Dfg)5C;'TDs!%ElW.SVlHC1@VA6;lY^#f.ks8Mocj4)&ZZE0a]K6:j;@fBsHA8HgPF(f/o@'0"s
-rtGCrV1reuA70`Ns7*=SEFrZfPO\JK#l)E)G@kAnGNl(+J,~>
-o`#3jbCOD?AT#$Vq#;*$jOhPe[Ao^TLm4C4_q3baZ)=V2^\kqN\=^n<m/JBsWH)@_pAaWdLi?m@
-V;AUk=gIDnot?l=?X9c(s7*F]C0YN/qu6U"n?A-g>_MA@rs/PTV12lYV"+Ha&F-?S@9fVts8M,\
-M.9eHkl1S]#4&7I@pFuZrr3`3dA2(n>f6.3s8DinrqXF(H<st!p&=t,pq`PA>A)mms8W)RVL`;f
-Dfg)5CVKcFs!%EmWIn_mHC:IYAQW#[^#f.ks8Mocj4)&ZZE0a]KQV!=@fBsHA8HjQF(f/o@BK+t
-rtGCrV1reuA70cOs7*=SEFrZfPO\JK#l)E*G@kAnGj21,J,~>
-o`#3jcDmA%R$u+pq#;'#L1;M>%1EUO$8Q4s_q3bg[V$!Xq[N];$_d@^s!?sKU4UDYs7!b+T9bhU
-iQdg:[d="dbIs^4J@+nIn]AA4LP4I[rr32l`OM7fQ0J;J#QEPsWfVe7nc&P"lGg)kJ?JDAro_;*
-P_,:drr2p%lbg&oK:M<-rtYLb_PW3<`Ua$.rVQQmq9ZpSNI].Drr3c/cG#s,KAc_.s8LonX-f*A
-U8+-@b5M8<0`BeGXI#0H]>1J/H?G(Xjno)Xrql6GeA]#)XJ;/DLPLnSR$jA-RA@$\R[K:l[IX4p
-'E77+Y+:uHN0N`0n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#6qhi2JbBP;n\rqcX2rTs@QiQJ^2WMHN)cJe6bqt/mh\(g-:rU^3Ub0]qNs!Ia#U1@`equ?<%
-MfWKKPI?KVHeJ5pn?A-r?!bbLs66G:A6jWHrr2p%l`,nQ?(CB_ru1aRT6O[J_=mp/rn!uq?!YVI
-s8C?>I:6K`nbrIlk,*c>?)7#irs/;5So@qLh#%!K#P"s\DHgE%r;Q^#o!Oiu>B]0.rs\eJTm:$G
-@q]FcB8?0Xs"O5]RWMk;>[1HHEJ1:2jQkXVf\"]ol1a`6kMtCKbe^K:DeN`p@V0q-C1_'eA@D7/
-rt=e+P]:;G?Ztc8nZ\'oAn#/3nbN1jpr8SCAn5:nl)=W4~>
-o`#6qhi;SdBP;n\rqcX2rT2eVZ_ES<PaA5XcJe6bqt/mhXKK+KrPAZITum)ss!Ia#UL[lgqu?<&
-N,rTLPdc]YI+e>qn?A-r?!khMs66J;A6s`Jrr2p%l`,nQ?(CB_ru1aRT6O[K_Y4$0rn+)s?!b\J
-s8C?>I:6NanbrIlk,3i??DR,jrs/;5So@qMh#%!K#P"s\DHgH&r;Q^#o!Oiu>Bf6/rs\eJU3U-H
-@qfLdB8?0Xs"O5]RWMk;?!UZLEJ1:2jQkXVg"Fosl1a`6kMtCKbe^K;DeN`p@V0q-C1_'eA[_@0
-rt=e,P]:;G?[(i9nZ\'oAn#/3nbN1jpr8VDAn5:ol)=W4~>
-o`#6qhl337R[Kr<rqcX1rOd/&%1ERN(Jp@-cJe6cqt/mhBabIK%Kd.JT_RpS-N;o=Q%@Zds7F@;
-TpVIXag?_[g%k[;`jhY!JBmohl,BilL6Ca!rr32g_m>PYW:0`c)Z%jrV2^#FpAb0lh8?4MJ'@Ze
-rRercObC(2rVm)a`3#/RY4;Mk#PZKWT883VqtpBun\qu/Lk"4Xrr32na1@^nNTU6?%/\PiV2p+[
-Ng,rtV=jcd0_il(UQ'_NI<pEsOK-@^n)i]kj5ASXp[RS4j5&80_69B$S!f\.OI;f4R@07s^A%L(
-'(<]HTp_1&OmE&;_6fo(P_c.*q>U`qcFKa=Q].'kW;hA~>
-o`#6sm&bA@AnZ4XqYL4/o^_[uY,e@pZGkP^oAlm+n,)qIb.c]qnc&._lHdfNmJeL0bFE$\j8T)R
-d>r?]DM3^N?+fV)s6HVBB3Sj$rVkNCIUccGm/I"iro']*?X'c,rr3o/\XRSB?/#2Us8'd/F'N>5
-r;ZQ,R<N(I[.aM!#Q<)DHsU*ip&=srn["Qp>^,?0qu6oeV28knEo[/urs%npP@RmUli-nnp:Zu8
->$@)HDJ!EsdJj+E(\4npDI@4VWi`_GcJS-cftXqsXe:!`qu6U*rr)WambP(/EFrcg@#Aq&AclRU
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g(a[AR]oKW;hA~>
-o`#6sm&bDAAnZ7YqYL4/o\[]`MhmXjZGkP^oAlp-n,)qIb-/"Z^])(P\u!F@mJeL0bFN*]j8T)R
-d?&E^DM3aO?+fV)s6HYCB3Sm%rVkNDIUccHm/I"iro'`+?X0i-rr3o/\sm\C?J>;Vs8'd/F'N>5
-r;ZQ,R<N(J[.aM!#Q<)EHsU-jp&=srn[+Wq>^5E1qu6oeVMStoF6!9!rs%npP@RmUli-nnp:Zu8
->$@)HDJ!EtdJj+E(\4qqDI@7WWi`_GcJS-cftXqsXe:$aqu6U*rr)WambP+1EFrcg@#Aq&AclRV
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g1g\AR]rLW;hA~>
-o`#6sm'rdWR@Bk\qYL4.oOf9T$48nBZGkP^oBO;snb`.Kb#AfZr=/o=%$LAPs!@Ql]oS!0rr;cB
-[%`t\XKIS0^@)"#lbg&sLk4C\rnbDhP_bsurr36&j27pYJ%5.Mru1OP]V((0gACpMqU30RLP"@[
-s7jjNUlgAEpAY'srRnubNe"q<rr35na1@[mNop?<rs.l(Z'pW1j8T&X#4BF=Q%>Fjrr3H$bIsO&
-H'jtfR?j2mrr)j5o#.u.N.\"-XgZ'khsgC!eBZ.V^S]QYrr3`4rV6$Qh7C%fR@&tgR[ok6R?iuB
-p\On&n&Mu4R?N>dlMpCj[%WnPLnsS:rs8DF\YPX[Ng&_+s*t~>
-oD]-ke:VIHBQ8U'qu$I:rTWITVkg?,e)^&okeDar]C5b!rThG=gZ\2"o^'uIp$Mc*p:Z`#M<b-@
-rS<QWAnZ$h=G#B*s8V5ZK4J5,jSo&"Q[*(NPOSSO#Q<&EH<ab,q>UC4n$&$i?#\g&s8V`&S8)8O
-jo5;PZ]K6:A%;=5rs/A=T64CFg%t^J#4&=M@pFuZqYpcaU5*JnGNf#*#3i+C@9ou)rr3GsYa/m*
-FiV=FB4bkDq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)SS`q>Ufm^R]IY@olp:Ir>6t!b[5Xqu7?/
-k-U(`Amef#m/QU[O)\c@@$C-Vrs8D=Q$-bOA9[::s*t~>
-oD]-ke:_OIBQA^*qu$I:rSk;MPaSMbe)^&okeMjt]C5b!rThG+Y.;<a_Rl\Wp$Mc*p:Z`#MX(6A
-rS<TXAnZ$h=G#B*s8V5[K4J5,jSo&"R!E1OPjn\P#Q<&FH<ae-q>UC4n$/*j?#em's8V`&S8)8P
-jo5;PZ]K6:A%;=5rs/A>T64CGg%t^J#4&=M@pFuZqYpcaUPESoGj,,+#3i+C@:$&*rr3GsZ'K!,
-G/qFHB4bnEq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)\Yaq>Ufm^R]IY@ols;J8Y?u!b[8Yqu7?/
-k-^.aAmef$m/QU[O)\c@@$C-Vrs8D>Q$-bOA9d@;s*t~>
-oD]-ke>&FuR\?e"qu$I3rNm"@+BkGPe)^&omF&)'_XIL(rThEe$k<1G!t>ZQp$Mc*p<0t'Rd0qQ
-rS=fSR@Bb/I$*7]s8V6#Xd+TsjSo&*\tt[NV==Ka#Q<;kVM]lSq>UC4n&Dl+LPb$is8V`6]pj_8
-jo5;P`3c8%M88ocrs/AH^S?[:g%t^J#4'78Q%PUnqYpca]W[fdP3DlE#3j.3P(C"1rr3Gs`jqIi
-M9!H.R@0DFq#14/n\DN(Oc\#NjQZ+*qu6<6^TXQ5Tps$rq>Ufmcb?0BP_4CfTUu.N!g]SOqu7?/
-kKU<'R?2ogm/QUl[%WnPLnsS:rs8DF\>5O[PEtI3s*t~>
-oD]3skbrH1ASZOGVsOE^ruh3s_Psrbh<an5ikpgsNPF3?rr<#qkeY$ekje<3d)>MBs!@0?M.*4L
-s8W)ZQ?m4V@TQdJnG`Idd\;/!>_MAAq9"eAAS-kirr35u`hIN\CuG9krs%_dLh'b>l2L\om]Vgb
->`7qJs73CMEFWXdp\t1)oYR8@?>SU"s8W)WVh8D`V"+<]#3hh8Cgq>Hrr36&goH!5?c2X;rsn@p
-N+6(Lk2;MDBOu/=rr2p%nZ@^h@Vk9*rri>h\rUh0Acl_$li-e]')U1eNc&E6<-H<EEFrfrAoc)n
-r;RH,bc6,*A6N-Ao)J6aO)\c@@$C-VrsAJ=OEG/JA9?`.WW.J~>
-oD]3skbrK2ASZOHW9jN_ruh3o[%t+Oh<an5il$q!Nka<@rr<#qkeXC'\\H"nVRQ-`s!@0?M.3:M
-s8W)ZQ[3=W@TQdJnG`Idd\D5">_VGBq9"hBAS6tkrr35u`hRT]D;bBlrs%_dLh'e@l2L\om]Vgb
->`A"Ks73CNEFW[fp\t1)oYR8@?>\[#s8W)WW.SMbV"+<]#3hk9CgqAIrr36&goQ'6?c2X;rsn@p
-N+6(Lk2;MDBOu2>rr2p%nZIdi@Vt?+rri>h\rUh0Acl_$li-e]')U4fNc&E6<HlKGEFrfrAol/o
-r;RH,c)Z;,A6N0Bo)J6aO)\c@@$C-VrsAJ=O`b8KA9Hf/WW.J~>
-oD]3skd-eER%:(W_XRR(ruh3V>_of0h<an5l.*2,SA3eNrr<#qkeTIl%1WjW$tf(ts!@0SZ%oLO
-s8W)ZZDO(YP_"%onG`IdftjYOKU:s'q9cUFR$496rr35udD;Q7LuA72rs%`,Ya'p*l2L\om`)`%
-Jt20,s73t0TTtVPp\t1)oZk7FMMU6js8W)Y`3#2SY4;Ag#3i_%SWf6#rr36&hoMjZK#m]crsnA4
-Z]p$0k2<83R[9K&rr2p%n\;?&PEP/,rri>ja0_K<R0/nXmf*+`')US3Z_!MAH&BY@TUD4:R%Dn-
-r;RH,fZ0t[Q\^!uo)J6r[%WnPLnsS:rsAJF[A0.XQ_!.8WW.J~>
-o)Bg*dtqgLAnlF@S]^I$s82'2fB2Z"kL6u'D0r;*jnJcQrsJYc_8"[ena+Z@na6>[lE,>?]Cl1'
--L%4TCLpdPK&6D)s7jL(H!t'Mn,N:<N,WB>GO5A0rpIXpE+4(Trr36&gSB=->`J.Mru1+#LLXkt
-nc/X]]7k-6BpJ>js8M,mP\afRkPkJdrR%Bf?<t/8qYqf)RXT$_DT;YTs8(!>H=1:<qu?]qiMM68
->cdMc]Qe%$C6\Mmrs/(sK5P7<\,H:*55jQB]74L*AnZ")S^HX!rqc!<cF9']AR88;ZerB<A7]Cg
-DMZI5s8W)mf!pl_ARAAEfD5I:Y`Ed9@UPDiq>Us#c&-IPB4u1McIg^bb5JLCJ,~>
-o)Bg*du%mMAnlFAT$$R%s82'2fB2Z"kL@&)DLAJ,jnJcQrsJYc_6'iM^UpANna6>[lE,>@]Cl1'
--L%7UCLpdPK&6D)s7jL(H!t'Nn,N:<NGrK?GjPJ1rpIXpE+4(Trr36&gSB=->`S4Nru1+#LLXkt
-nc/X]]7k-6C6nMls8M,mP\afRkPkJdrR%Eg?=(59qYqf)Rso-`DT;YTs8(!>H=1==qu?]qiMV<9
-?**Vd]Qn+%C6\Mmrs/(sK5P7<\,H:*55jQB]7=R+AnZ")T$lg#rqc!<cFB-^AR88;ZerB=A7]Cg
-DMZI5s8W)mf!pl_ARAAFfD5I:Y`Ed9@UPDiq>Us#c&6OQB4u1NcIgacbPeUDJ,~>
-o)Bg*e"E%mR%0kP^=i/Xs82'2fB2Z"mGQ<uP`W&jjnJcQrsJYc_*8>;%LihXna6>[lGocU_=dg-
--L%t?SX5:\Ol$!8s7jpTV36P3n,N:<Z_*YOSF$:Urp\=LT9#/urr36&hSQ:UJtDB/ru1+@YEb!S
-nc/X]`NGf"R'-)]s8M92\=J\DkPkJdrReucNe"q<qYqf)[],gaR*bg3s8(?dViZ_hqu?]qj2A$\
-J@+n:_5*KeR^)Yers/)/XIbfI`r5l955jcd_Q'&lR@9\C^#&/Trql3IgsER+R#ZK:\)4upQC+)0
-T<HoFs8W)niR#$+R#ZK?fD5I:_6fo(P_c.*q>Us#d^#L4R@BhYgZ%2BgAS2SJ,~>
-o)Ba/m(IUQ@qB=nJ![1Jce7C<f@J6]Vg;umQbhDFr;-F"qrY`0g$%bO`:<9q#6*J_F)'D)rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&]MAnPt[p&*jhVh8bsIHgb2-2YoZH='sZo)Jagd@G\sD6rp8
-s7k,rBP(q$_Ya,_]:+%ZAprqCrs/;6Soe1Bg%tRFEU03?BP2(>lM^"mYDdF1DqY-is8CB@HsL(&
-p\NU&D.[I&_>XE6oYc)fAncbIrVui^c'`OhJ7iA'B4u::SZ]T?_S<LQLiHp0:fES5o@f+9@:a(g
-H'PYSbKe,8P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]JnS_-BPrBkWhXj:p9+FG~>
-o)Ba/m(IXR@qB=nJ![4Ld+[R>f[e?_W-W)oR).MGr;-F"qrY_sXgu'C\+/nd#6*J`F)0J*rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&`NAnQ"\p&*jiVh8bsId-k3-2YoZH='sZo)Jagd@PbtDR9$9
-s7k,sBP(q%_Ya,_]UF.[Aq'"Drs/;6Soe1Cg%tRFEU06@BP2(?lM^"mYDdF1E7t6js8CBAHsL+'
-p\NU&DJ!R'_YsN7oYl2hAnceKrVui^cC/akJS/J(B4u::T!,fC_nWURLiHp0:fES5o@f.:@:a(g
-H'Y_Tbg4;:P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]K4nh.BPrBkWhXj:p9+FG~>
-o)Ba/m(f'QPaIr5Wk-3th;mk`iSiSA`MSQHT>B7Nr;-F"qrY^Z$k3XSAb#3g#6*T(U6+()rr4>5
-]<.ZgJ9Sfurr<#ic+g$<OM1;dro'oKR$jP^p\a=.`N>\rT'?7S-2Z3-VN6;8o)JagfY4>OR)&Cp
-s7k-ER[BS?dJNb#d_)KIQ(I7>rs/;D^8$O7g%tRFEU0s,R[KYMmeuV/ag.P'QJDK>s8CWfVi6/O
-p\NUASXGq?dJa+FoZ="uR%()6rVuicgq/okT9bb0R@BkN^<+gRf@8*^Yb78=GB9;0o@fq'P*_T.
-VRXe#gYLQ.\"oCPHul1Jrr;N)[%WnPLnsS:rsnq]W0s!?R\$Rn`knUap9+FG~>
-nc'R)iM^Kt?t<kbFFfLGWNrn2QuunCBp6-WlhUPTrs8Ma_8"[bf>[7Ks(;9#lH6&KFN!>@s8VZ#
-MJQNsK&6D(o^(GHP&OuPU>PtMl(Ds(AT*="XcddEAS,Ll[+3%=oXpK)>?o)?s8Vr8NH&QBIE]p?
-q;R?H@V9bCWMY2mBP(geDm\'3d-e,uA6Na,rqcY7o"B-RA8?UbXdaBWB4YXiRa]EmoY-W)=^g.b
-rp-Y+@qKV2^>dMmfnj<LAp9TQaMOii?&[14CgCFYAS>n&J;9&@Km[`H>uXU'PgK""m_s9V?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXB3\hR@qB=iA7:epY5a"~>
-nc'R)iM^Kt?t<kbFFfLGWj9"4R<E(FC6Q6XlhUPTrs8Ma_6'iJX0hBcs(;9#lH6)LFN!>@s8VZ$
-MelWtK&6D(o^(JIP&OuPU>PtMl(Ds(AT*@$Y**pHAS,Ll[+<.@oXpK)>?o)?s8Vr8NH&QBIEg!A
-q;RBJ@V9bDWMb8oBkCpfDm\*5d-e0!A6Nd-rqcY7o"B0SA8?UcY+0QZB4YXiS(#QpoY-W)=^p4c
-rp-\,@qKV2^>dMmfnsENAp9WRaMXrk?B!:5CgCFYAS>n&J;9&@Km[`H>uXX(Q-f+#m_s<W?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXBO"qS@qB=iA7:epY5a"~>
-nc'R)iNJ<#OHu<*UT:f<`lu]J];(@6JXa7"lhUPTrs8Ma_*8>;$r-6\s(;9'maoFRT$Qg's8VZ-
-Z(6brOl$!7p@74k\"B%Y\E<ejl*-V?R%LS"agRq4QC+&1a5PS)oZOe8LjmD=s8VrAZ_<bSVqKhH
-q;S9;PF8/P`l+mNQ'[l*S]B^>h<r7hQ\C.PrqcX&o#%)_QCY"hah=C>rg7/a\DQ#goZXk7Kn/"X
-rp.%bQ'n5Fd-9EIfqXaoRAILAf[[p/JXOolOc#3bR$sS@Wir\4Y,IqVMgf_kSC$j*m_tEKN0BX"
-Uoq8B^:()5P_j[*Q.,F+s7*h'Q&poVU[e0[%fYUjOc,9aQ'[r1Q&;L1Y5a"~>
-nc'L+p",mS?!CTA?t!MS@pr\J=&s:,]$fg9rUp0qqrY`/eBP_pnc)Gai3TGCAR/\cG-UrEpW.Sa
-:gh?5rqO73TQadJ>$Z,lPPXprG@4QW>$G08OFL_B=^#BOBs$TcB3S;>h#%-Oq9*kc=]o$FBP6f&
-^2mU`r`Tq;CS5cU=]np>C2'g1M.KgeFQ`K"55O#m@p3&?>$>'WQ=jB(=^c&ZNT?L@>>]7urr;`B
-JRDVb>\S1mVWGI1?<^]DBP:jZBq*B3fqN.d>?bE@rEq6b?!C?/;-%Y9dd[58qr>,4?<^T=?X[DR
-@UNJD<)HhTbjYN1s7)^m>$"^$O7E#F"nKol?WgM1=Thf*;NL@Ns*t~>
-nc'L+p",pU?!CTA?t!MS@pr\J=''C.]$fg9rUp0qqrY_rWM?N]nc)GaiO#VEAR/\dGI%,GpW7\c
-:gqE6rqO:5TQadJ>$Z,mPPXprG[OZX>$G08OFLbC=^#BOBs$TcB3S;?h#%-Oq9*nd=]o$FBP?l'
-^2mXar`Tq;CnPoW=]np>C2'g1MIfpfFm&T#55O#nA6N/@>$G-YQ=sH)=^c&[NoZXB>>];!rr;`B
-Jmhed>\S4oVrbR3?<^]DBP:m[C7EK4fqN1e>?bE@rEq6b?!C?/;HIk<dd[58qr>,5?X-c??X[DR
-@UNJD<)HhUbjYN1s7)an>$"^$OR`,G"nKol?WpS2=Thf*;NUFOs*t~>
-nc'L+p"-."K85AFOHG`kQ'.)ZH$+e2]$fg9rUp0qqrY^Z$k+u[nc*5"kKV#QQ].!!UW332pW]Ol
-GC.C"rqOsb^nm-KLl@n"ZMO4<QAC6NLk^D*R$!;]L51hRO1shcQA'R/h#%-Oq9YalL4tJJP)Sku
-^lsS.Lkp_3Jte9^L5(JEPE3H<Y*4EZMWag855O$,MhHkAL4OW0S;i;YL5_=YW8t@QKQVt/rr;`B
-S;W,XMjBou]&gYfKnbMJR@&t_J>(6Pfr9aYKo(eMrK&XlN/3%2F*3/;dd[58qr>2JJqSo;O-,Wj
-PE:]UHZF=pbjYN1s7*LXJ9uQ_TCM^V"nKp)Jpr4KJHUIKF.`!*s*t~>
-nGa:'o@UL#@Tc`5=&r:!<*O-jVSC^HpAOR^#5dQ!\[\s2nc&ag`,8sbrDsP4R.UFUgM'bkOQ-0;
-mYPO[qc>FQG45Cl\:.[a='g0Qa1$"i='KBoY1hojD.[F1jo5;[qr!`H='&mRNP4]TiO!b,<tf%s
-]Zd<l='&U?LT]@gI;<G.R-aYK+TCiPO^M6l>Ap1P`IV;r=(lrVd,:%)An[7ks8W&_]Qa?V)J"5b
-dI?,&I:$&S='K[-]%6?Io@LF+AQW&8r`9J.<)cdtAq$SmhXpdGrtP7f_j,4H='&F(=&r:!<F0sM
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+0"rFQ.II^&CGs*t~>
-nG`^lo@UL#@p8k5$s$>+<Ej6lVSC^HpAOR^#5dQ!Vim_=nc&ag`,B'erE'V6R.UFUgM0knOQ-0;
-mYPR]qcGLSGOPLm\:.^c=C6BTa1$"j=BoTrYM/#lDJ*X5jo5;[qr!`I=BK*VNP4]TiO!e-=;,2!
-]Zd<m=BJgCLTfFhIV`Y2R-aYK+TCiPO^V?o>]?@R`IV>t=D</Yd,:(*B5*Ins8W&_]QjEX)J+;d
-dI?,&IUH8V=Boj/]%6?Io@LF+Am&5:r`9J.<)lk!B7HbohXpdGrtP7f_j,7J='&F(=&r:"<F:'P
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+3$rFZ4JJ$ALHs*t~>
-nG`[ko@UL4J,Xa'H[9mXFEi=sW5$pJpAOR^#5dQ!57013nc&agc]s*,rH8`sWV$5fgQ-Q%S)X>F
-m\bqiqfXW:O73&0\rV,[G']"Ia1@.PG'JS&ZJ+?3LOO]6jo5;[qr"5uG'87gR(r"aiO4XCFq]7c
-]ZdR7G'8+]Pd9$#RY6-?V!RpW:&aV(S:#L'G_;d/`KY^mG(5INd,:gXIXdpSs8W&_^5[>[G(,FI
-eF;G+NdGqjG'J\/]%6?Io@LF7IsH<cH@(!bGBItMIZ12@hXpdGrtP7f_juO.G^4U^H[9jVFaAnF
-cL(T0rrVc+Q2ZR@Nk"ZTrrr>daJY#JrI+j!Nk"Y_s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!ZG#VprrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-SrS-pGmK4fX16=.meZq]rs/Q"m+&kSOb<RW#)SnWa5?IdrVlroim%JA!mTa"
-p\tBnn(c("rO;sCb2W3!s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!VmYm]rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-Sr\3rGmSeROK5n6h<t.=rVm-%qWubIYE=M:GmAYPS[6Aoo)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-n,EUkpZ'?$SW*N'#`tOY]Zo="q#9a^"oIH!@u'F@rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&KLm
-YeS]Op\t3lp>sQ-U6^Z7L^Ap$R&da>h<t.=rVm-%qWubIYF1IML^/d#TsMeso)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-%%EndData
-showpage
-%%Trailer
-end
-%%EOF
diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt
deleted file mode 100644
index a0c0c63e0..000000000
--- a/docs/draknet_advanced_doc.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-This document details the entry points you can call without the DrakX graohical
-toolkit. First, the general variables you will encounter further. If you don't
-know wht a variable is, look here. Any additional locally variables are
-commented 'in place'
-
-------------------------------
-Special types (in upper cases)
-------------------------------
- DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2
-
----------------------------------------------------------------------------------------
-Summary of common variables used (local variables are described in the function itself)
----------------------------------------------------------------------------------------
-notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive
- $prefix : prefix path (empty in post-install) : string : path
- $isLaptop : flag for laptop : boolean or int : guess
- $isdn : hash table containing isdn infos
-  $isdn->{login} : cnx login : string
-  $isdn->{passwd} : cnx passwd : string
-  $isdn->{phone_in} : user phone : /^[0-9]*$/
-  $isdn->{phone_out} : ISP phone : /^[0-9]*$/
-  $isdn->{dialing_mode} : dialing mode : "auto" or "manual"
-  $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ...
-  $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/
-  $isdn->{irq} : irq of the ISA card : integer |
-  $isdn->{mem} : mem of the ISA card : string  |
-  $isdn->{io} : io of the ISA card : string    | see netconnect_consts for examples.
-  $isdn->{io0} : io0 of the ISA card : string  |
-  $isdn->{io1} : i01 of the ISA card : string  |
-  $isdn->{idl} : amount of time after the cnx times out in secs : int
-  $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion.
-  $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia"
-  $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world
-  $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer
-  $isdn->{description} : card description from pcitable : string
-  $isdn->{vendor} : card vendor : integer
-  $isdn->{passwd2} : passwd verification : string
- $modem : hash table containing modem infos
-  $modem->{device} : device of the modem : string : /ttyS[0-9]/
- $adsl : hash table containing modem infos
-  $adsl->{login} : cnx login : string
-  $adsl->{passwd} : cnx passwd : string
-  $adsl->{atboot} : 
- $netc : hash table containing system-wide networking infos (maybe not true, correct this) : 
-  $netc->{NET_DEVICE}
-  $netc->{dnsServer2}
-  $netc->{dnsServer3}
-  $netc->{DOMAINNAME2}
-  $netc->{NET_INTERFACE} is set to "ppp0"
- $in : interactive object
-
-------------
-Entry points
-------------
-
-isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now
-input :
- $prefix
- $isdn
-$isdn input:
- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode}
- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1}
-
-write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login
-input :
- $a : login : string : /^.*$/
- $b : passwd : string : /^.*$/
-
-connect_backend : launch the cnx script
-input : $prefix
-
-connect_backend : launch the cnx script
-input : $prefix
-
-read_providers_backend : build the tree of isdn ISP
-input :
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name
-
-get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc
-input :
- $isdn
- $netc
- $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-$isdn ouput
- $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3},
-$netc output
- $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}
-
-isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card
-input
- $isdn
-$isdn output:
- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type}
-
-isdn_get_list : return isdn cards descriptions list. This function is not use internally.
-output : descriptions : list of strings
-
-isdn_get_info : return isdn card infos. This function is not use internally.
-input : the description of the card (see isdn_get_list)
-output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,)
-
-conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-input
- $prefix
- $netc
- $intf
- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
- $ipadr : facultative, ip address of the interface : string
- $netadr : facultative, netaddress of the interface : string
-when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-$intf output: $device is the result of
- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
- $intf->{$device}->{BOOTPROTO} : $type
- $intf->{$device}->{NETMASK} : '255.255.255.0'
- $intf->{$device}->{NETWORK} : $netadr
- $intf->{$device}->{ONBOOT} : "yes"
-$netc output:
- $netc->{nb_cards} : nb of ethernet cards
- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-output:
- $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call.
- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-
-adsl_conf_backend : write adsl configuration
-input :
- $prefix
- $adsl
- $netc
- $adsl_type : type of cnx : string : "pptp" or "pppoe"
-$adsl input:
- $adsl->{login}, $adsl->{passwd}, $adsl->{atboot}
-$netc input:
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
-$netc output:
- $netc->{NET_INTERFACE} is set to "ppp0"
-
-modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-input
- $modem
- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-output:
- $modem->{device} : device where the modem were detected
-
-get_net_device : return the device choosen for the net cnx
-no input
-output : name of the internet device.
-
-read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
-input:
- $prefix
- $netcnx
- $netc
-
-set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
- $prefix
- $netcnx
- $netc : useless! REMOVE ME
diff --git a/docs/interactive/ask_from b/docs/interactive/ask_from
deleted file mode 100755
index dad69247e..000000000
--- a/docs/interactive/ask_from
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $irq=1;
-my $login;
-my $login2="editable";
-my $check;
-my $range=57;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-$in->ask_from("window title - ask_from",
-	      "message\nexamples of utilisation of ask_from",
-	      [
-	       { label => "enter scalar", val => \$irq },
-	       { label => "combo (type=>combo optionnal)", val => \$login, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], type => 'combo'},
-	       { label => "choose from list editable and sorted", val => \$login2, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], not_edit => 0, sort => 1},
-	       { label => "check box", val => \$check, type => "bool", text => "text" },
-	       { label => "range", val => \$range, type => 'range', min => 0, max => 100 },
-	      ],
-	      complete => sub { print "complete\n";print "$irq\n$login\n$range\n"; },
-#	      focus_out => sub { print "focus_out\n"},
-#	      changed => sub { print "changed\n"; },
-	     ) or $in->exit(0);
-$in->exit(0);
diff --git a/docs/interactive/ask_from_list b/docs/interactive/ask_from_list
deleted file mode 100755
index 63c0ee996..000000000
--- a/docs/interactive/ask_from_list
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my %l = (
-	 0 => "Welcome To Crackers",
-	 1 => "Poor",
-	 2 => "Low",
-	 3 => "Medium",
-	 4 => "High",
-	 5 => "Paranoid",
-	);
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my $level = $in->ask_from_list("window title - ask_from_list",
-			       "radio button\nexamples of utilisation of ask_from_list",
-			       [ values %l ], $l{2}
-			      ) or $in->exit(0);
-
-print "$level\n";
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_listf b/docs/interactive/ask_from_listf
deleted file mode 100755
index 077540b49..000000000
--- a/docs/interactive/ask_from_listf
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use Data::Dumper;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my @m=(
-       { description => "dhcpcd",
-	 c => 1},
-       { description => "dhcpxd",
-	 c => 3},
-       { description => "dhcp-client",
-	 c => 4},
-      );
-my $f = $in->ask_from_listf(_("ask_from_listf"),
-				_("Which dhcp client do you want to use?\nDefault is dhcpcd"),
-				sub { $_[0]{description} },
-				\@m );
-
-print Data::Dumper->Dump([$f],['f']) . "\n";
-
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_treelist b/docs/interactive/ask_from_treelist
deleted file mode 100755
index ade7141d4..000000000
--- a/docs/interactive/ask_from_treelist
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $foo = $in->ask_from_treelist("window title - ask_from_treelist",
-		       "message\nexamples of utilisation of ask_from_treelist",
-		       '|',
-		       ['Custom',
-			'Other|Unlisted',
-			'Matrox|Millennium II=>Matrox Millennium II',
-			'Matrox|Millennium G200=>Matrox Millennium G200',
-			'Matrox|Millennium G400=>Matrox Millennium G400',
-			'Matrox|Millennium G450=>Matrox Millennium G450',
-			'Matrox|Millennium G550=>Matrox Millennium G550',
-			'Sun|FFB 67MHz Creator=>Sun FFB 67MHz Creator',
-			'Sun|FFB 67MHz Creator 3D=>Sun FFB 67MHz Creator 3D',
-			'Sun|FFB 75MHz Creator 3D=>Sun FFB 75MHz Creator 3D',
-		       ],
-				 'Custom'
-		      ) or $in->exit(0);
-print "$foo\n";
-$in->exit(0);
diff --git a/docs/interactive/wait_message b/docs/interactive/wait_message
deleted file mode 100755
index 0caec4471..000000000
--- a/docs/interactive/wait_message
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $wait = $in->wait_message('wainting title', _("Moving files to the new partition"));
-sleep(3);
-$wait->set(_("Removing"));
-sleep(3);
-$in->exit(0);
diff --git a/docs/mdk-9.2 b/docs/mdk-9.2
deleted file mode 100644
index 1d5a06494..000000000
--- a/docs/mdk-9.2
+++ /dev/null
@@ -1,129 +0,0 @@
--*- outline -*-
-
-        todo list for mdk9.2
-        (mainly gtk+ oriented for now)
-
-* erratas
-** put them in gi/perl-install/patch/mdk_9.1
-** move mdk9.1 ones from gi/perl-install/patch into gi/perl-install/patch/mdk_9.0
-
-
-* libDrakX
-** document internals through docbook like kernel-2.5.x does
-
-* mcc vs tools communication
-** faster tools embedding in mcc (gc idea)
-   move gui into gui/<sg>.pm so that mcc can just do require on them
-   instead of doing slow fork+perl startup (same idea as fast_cgi,
-   perl_mod and the like)
-** told apps to ask user whether to save their changes or to discard them on cancel (#1437)
-** to let diskdrake fit better when embedded, we should write "formated - mounted" rather than "formated\nmounted"
-** "testing mode" option in options menu so that we pass --testing to our tools ?
-
-* ugtk2 & tools guies:
-** cleanups:
-*** $o->flush() should be sub { $_[0]->window->process_updates(1) }
-    see logdrake::parse_file()'s progress bar as an example
-** saner/cleaner usage of gtk+-2.2 widgets:
-*** use MessageDialog for modal windows (cleaner)
-    especially for wait/error messages so that one uses std gtk+ icons for info/error/warning and the like events
-*** use button boxes everywhere when we have several buttons for saner gui (as per gnome specs/recommendations)
-*** gtk::combo => gtk::optionMenu (as per gtk+-2 doc)
-*** use size::group to let things be smoother in some places (eg: clock.pl from mcc)
-
-* tools
-** all:
-*** provide menu entries for more gui tools (?): for now, only harddrake2 and logdrake have one
-*** explanations of std standalone.pm functions are broken due to common.pm overloading
-*** have a button or a menu to access help (was already part of mdk9.1 specs)
-    only harddrake2, mcc and rpmdrake have one for now
-    policy might be: "most users access tools via the mcc, so let handle help, bug reports and co only in mcc"
-*** rename and provide compatibility links:
-**** adduserdrake  => drakeuseradd
-**** diskdrake     => drakdisk
-**** harddrake     => drakhw
-**** keyboarddrake => drakkeyboard
-**** localedrake   => draklocale
-**** logdrake      => draklog
-**** menudrake     => drakmenu [fredc]
-**** mousedrake    => drakmouse
-**** printerdrake  => drakprinter
-**** userdrake     => drakuser [deush]
-**** XFdrake       => drakx11
-** drakboot:
-*** should prevent the user to insert a space in a kernel label (#2826)
-*** fix "Display theme under console" setting from current theme config file (#2662)
-** drakconnect
-*** does not show up zeroconf as a valid mode in "configuring lan" window in embedded mode
-** drakedm: 
-*** restart dm service ?
-** harddrake: 
-*** colorize the internal help
-*** add raw description (or join('|', vendor, descr)) for mass medias (see drakx bug #3???)
-*** use pure gtk+ instead of interactive for "fields description" or alter interactive so that it creates modal windows
-** logdrake:
-*** search field does not get focus when embedded
-*** we may disable the search button when one deselect all explanation files
-** mcc:
-*** make tool names be black or blue (like in rpmdrake & harddrake2 guies) (#2695)
-*** hide non executable programs instead of warning at runtime if program isn't executable
-*** make more program being options rather than depandancies (ie like rpmdrake and drakwizard)
-*** add scrollbars if root window is below 800x600 (#2961)
-*** add scrollbars for too big translated messages (but how to detect it)
-*** move drakedm from hardware to system section
-*** enhance mcc descriptions (#3265)
-** rpmdrake
-*** save mode (sort by group, mdk choice, ...)
-**** sa serait cool que tu sauve la position (aka choix mdk, tri/alpha, par
-     groupe, par taille, ...) et que tu la restaure
-*** m-q accelerator to quit
-*** if package is unselectable, explain why
-*** si conflit, proposer de deselectionner le package en question +tot que de
-    devoir se taper l'arborescence pour le deselectionner (a - que la
-    recherche e perde pas la selection de package en cours)
-*** some windows are still non modal, like:
-    o tout ce qui se rapporte aux dependances "des paquetages
-      supplementaires sont necessaires", ...  tu oublie de passer "{
-      transient => $w->{rwindow} }"
-    o toutes les fenetres grpmi.  faudrait voir si on peut foutre le
-      core de grpmi dans un package pour faire "use grpmi" et seter
-      le nouveau $::main_window pour corriger ca.
-*** we need access to urpmi options like "no gpg signature check"
-*** bug 1
-1) selectionner des packages a installer
-
-2) rpmdrake dit que X doit etres vier
-
-3) rpmdrake le vire
-
-4) rpmdrake passe a l'update/isntall proprement dite
-
-5) rpmdrake failled
-
-rpmdrake re-tentera d'enlever le package X du 1 en cas de reessai
-alors qu'il n'est + la
-
-** scannerdrake/sane-find-scanner
-*** do not detect every usb devices as scanner
-** urpmi
-*** --repair-system: add missing dependancies for currently installed packages
-
-
-* packages
-** main package updates:
-*** rpm-4.2
-*** kernel-2.6 (if availlable and stabilized: not probable) ?
-    at least, keep kernel-2.4.x
-** add new packages:
-*** kernel-mosix
-*** dvb related packages: vcr, vdr, ...
-** icewm/windowmaker/other wm
-*** export BROWSER like gnome/kde (look at /etc/gnome/gnomerc)
-
-* hardware support
-** kernel: update alsa, bttv, dvb & saa7134 drivers for better hardware support (the laters from http://bytesex.org)
-*** add "REGISTER ^dvb/adapter[0-9]+/[^/]+$ PERMISSIONS root.video 0660" to devfsd
-*** update oss audigy driver from pserver:anonymous@cvs.sourceforge.net:/cvsroot/emu10k1 cvs
-** add cx88 sound driver from http://bytesex.org/snapshot
-** isa detection/probing in ldetect ? (#118, #497) => need some old hw in order to test
-   probably not
diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat
deleted file mode 100644
index 4d0de8223..000000000
--- a/docs/mdk-vs-redhat
+++ /dev/null
@@ -1,43 +0,0 @@
-+ Open Development (at least DrakX)
-+ UDMA66 (HPT366)
-+ gamerz
-+ number of packages
-+ better packages(?)
-+ no automatic handling of ide burners
-+ urpmi/rpmdrake
-+ XFdrake
-+ no newbie install
-+ reiserfs
-+ fat resizing
-+ 3D handling (eg: Voodoo3)
-+ diskdrake (vs diskdruid)
-+ usb storage (?)
-+ KDE2
-+ faces in kdm/gdm
-+ menu
-+ alternatives
-+ /etc/emacs/site-start.d
-+ default config
-+ i18n (bootloader keyboard)
-
-+ More user-friendliness in general:
-	+ you can choose between multiple net devices when more than one are
-	detected
-	+ you are presented with the media descriptions (disks, cdrom's)
-	when you must choose between multiple media, and not only "sda",
-	"hdc", ..
-	+ when installing from a disk partition, you are presented with an
-	extract of the directory contents when you fail to give the
-	correct location, which is very helpful to correct the input
-	instead of simply rebooting to remember where on earth you
-	mirrored the distribution on your disks
-
-+ Automatic mode (Redhat's equivalent is called "kickstart") is not
-  performed according to a file on the floppy but from kernel parameters,
-  which have many pros, among them: (1) we don't need the vfat filesystem
-  for that purpose, and (2) with advanced bootloaders such as grub and
-  lilo you can edit parameters on the fly at boot time.
-
-- no LABEL= in fstab (for auto renumbering of devices)
-- kerberos
-- LDAP
diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig
deleted file mode 100644
index 19f7f5318..000000000
--- a/docs/net_object_class.fig
+++ /dev/null
@@ -1,73 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 1875 3225 2850
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4575 1950 4200 3750
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5250 1950 5475 2775
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 3000 3450 3600 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5925 3450 6675 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 2700 3450 4050 5550
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 4500 4575 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5625 3450 5025 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5775 1575 9450 4725
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7800 4275 9000 4800
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4800 1950 4800 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 9000 975 9450 4725
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
-	 7500 75 10687 75 10687 975 7500 975 7500 75
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7500 375 5400 1050
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5550 1800 7200 3675
-4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001
-4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001
-4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001
-4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001
-4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001
-4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001
-4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001
-4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001
-4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001
-4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001
-4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001
-4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001
diff --git a/docs/object_class.fig b/docs/object_class.fig
deleted file mode 100644
index 44fd3fe89..000000000
--- a/docs/object_class.fig
+++ /dev/null
@@ -1,32 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 2625 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 7575 1650
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 6075 4125
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 4950 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 4950 1725
-4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
-4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
-4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/docs/porting-ugtk b/docs/porting-ugtk
deleted file mode 100755
index a72faabb6..000000000
--- a/docs/porting-ugtk
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/usr/bin/perl -pi
-#
-# $Id$
-#
-# This is not an automatic gtk+-1.x to gtk+-2.x port tool,
-# just a tool that ease perl apps' gtk2 port.
-# you'll have to fix all remaining problems, beginning by spotted warnings
-# it'll save you basic conversion work
-#
-# if you used Gtk::Text, a little more work will be needed (look at logdrake gtk2 port)
-# if you used Gtk::CTree, Gtk::CList or worse, Gtk::Tree, you'll need quite a lot of exhausting work :-(
-#
-# usage: porting-ugtk <file>
-#
-# hint: always use strict
-
-# switch to gtk2 :
-s!Gtk:!Gtk2:!g;
-/(use|require) Gtk/ and print STDERR "Warning: if this (bad) app that did not use my_gtk, you'll have a hard time :-)\n         if not, using both Gtk && my_gtk was misdesigned ...\n";
-s!(use|require) Gtk.*!!g; # 
-s!my_gtk!ugtk2!g;
-
-# one should pass the right ":stuff" to "use ugtk2 qw();"
-/ugtk::/ and print STDERR "Warning: you'll have to passe eiter :ask, :create, :helpers or :wrappers to ugtk\n";
-s!ugtk::!!g;
-# if my_gtk wasn't used, this'll be spotted by the lack of "use ugtk2;" anyway
-s!(require|use) ugtk.*!!g;
-
-
-# deprecated :
-/::(CTree|CList|Text[^V])/ and print STDERR "Warning: CTree, CList and Text widgets are deprecated... Good luck :-(\n";
-/gtkcreate_(png|xpm)/ and print STDERR "Warning: new Gtk::Pixmap(gtkcreate_(png|xpm)) should be replaced by gtkcreate_img\n";
-/set_policy/ and print STDERR "Warning: ->set_policy() should be replaced by allow_shrink/allow_grow/set_resizable\n";
-
-# obsoletes methods||functions :
-s!set_usize!set_size_request!g;
-s!gtkset_set_border_width!gtkset_border_width!g;
-s!border_width!set_border_width!g;
-s!-(end|spread|extended|start|single)!'\1'!g;
-s!createScrolledWindow!create_scrolled_window!g;
-# quite a lot less usefull with gtk+2 but who knows... :
-s!set_position\(1\)!set_position('center')!g;
-s!gtkpng!gtkcreate_img!g;
-# hacky but usefull in ->set_pixmap() context; else that'll be spoted at run time :
-s!gtkcreate_png!gtkcreate_img!g;
-# usefull sometimes but not in most cases :
-#s!new GtkVBox!create_vbox!g;
-#s!new GtkHBox!create_hbox!g;
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html
deleted file mode 100644
index 3fd545447..000000000
--- a/docs/spec-DrakX-8.0.html
+++ /dev/null
@@ -1,405 +0,0 @@
-<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head>
-<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000">
-<table border="0" cellpadding="0" cellspacing="0" width="100%">
-<tr>
-<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr>
-<tr><td valign="top">
-Current team of Install group is :
-<p>
-<table cellpadding="2" cellspacing="2" border="1" width="30%">
-<tbody>
-<tr valign="Top">
-<td valign="Top">gc
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">damien
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">fpons
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">pixel
-
-</td>
-</tr>
-</tbody>
-</table>
-<p>
-
-<pre>
-
-  <b>Boot process (stage1)</b>
-
-    Installation begin by booting from CD-ROM or Diskette. From CD-ROM all
-installation method are available (CD, HD, NFS, FTP, HTTP) on options. From
-Diskette according to image selected, only some related method (network or cdrom
-or hd) are available and module managed due to size limitation to 1.44Mb.
-    Options are always available by pressing on F1.
-
-  <b>DrakX process (stage2)</b>
-
-    DrakX installation organized in steps (execution sequence described below).
-Steps listed on left side and help available on bottom right side. most of the
-screen is available for various dialog for interacting with the user. Steps
-execution sequence is automated and described below.
-
-Mouse is probed and if none has been found or if the mouse has not moved, a
-specific mouse configuration is displayed at the begining.
-
-
-Before the graphical steps, there is a detection step. It detects various
-hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and
-tablets.
-
-    <b>Steps</b>
-
-      <i>Choose Your language</i>: step always displayed. default choice is previous one or
-<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the
-chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should
-stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all
-DrakX visible widget. Advanced mode allow to select other language available to
-be installed. Advanced mode allow to select language which will be installed on
-system.
-      If step is redone, the license is no more displayed.
-
-      <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one
-or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons
-available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed
-according to installation class selected, where the default is the one of
-<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>.
-
-      <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode,
-automatically done. In Customized mode, all modules that manage SCSI/IDE cards
-are loaded automatically and a question asking for other module to load is
-displayed.
-      If clicked later or if to the question to load other module the
-answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other
-module to load is. When a module is chosen, two options are available
-<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any
-other user options (default module parameter). Specify options allow user to
-give module parameters individually in a list for all known parameters. At this
-point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation
-and go to next step. If any error occurs during module installation, a question
-asking to try with other parameter is displayed, the same module is still used.
-
-      <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice
-accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing
-partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the
-Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk
-configuration =&gt; only one big fat for the first case only), "Custom disk
-partitioning".
-      If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk.
-      If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux
-scheme are displayed with their approximate size in Mb and propose mount point
-to choose in list boxes for each partitions available on hard drive.
-      If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size
-on the windows partition to create a root file and a swap file which will be
-used in loopback, this means this is a lnx4win installation.
-      If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize
-the windows partition and allocate true linux filesystem (at least / and swap).
-      If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the
-partition table before auto allocating partition.
-      If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to
-change make diskdrake use only advanced mode.
-Diskdrake show all partition of all non-removable disk graphically. All special
-partition are hidden, only user accessible partition are visible: this remove
-extended partition, whole disk partition on sparc platform. Clicking on a disk
-notebook tab show all his partitions. Clicking on a partition show all actions
-available for this partition (depend if customized or advanced mode) as well as
-information on this partition (depend if customized or advanced mode). Most
-diskdrake operation are done without writing on disk (exception are Resizing
-partitions) and everything is written once on the disk when exiting diskdrake,
-at any time if writing partition table is necessary, there are always a dialog
-box asking the user to confirm the write. If no operation are modifying
-partition table, no dialog is displayed on exit (for example if giving mount
-point to partition). General action are available too:
-        <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk.
-        <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the
-seen disk).
-        <font color="#000080"><i>Undo</i></font>: undo last operation.
-        <font color="#000080"><i>Done</i></font>: quit and save changes.
-Other operations are available in advanced mode:
-        <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table,
-absolutely no garantee to succeed and may destroy what could be saveable by
-another tools.
-        <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in
-memory done by the user.
-        <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default
-behaviour on startup.
-        <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved
-partition table from diskdrake.
-        <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy.
-        <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This
-include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default.
-      Operation available on partition are:
-        <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only
-available for true filesystem partition.
-        <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is
-used no data may be lost, else all data are lost but nothing is written by
-diskdrake on the partition data in this last case (this means data can be
-restored by restoring original size and location).
-        <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type,
-location, size) all data can be restored as diskdrake doesn't write on partition
-data.
-      Operation available on partition table but in advanced mode are:
-        <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as
-above does not destroy them, and everyting can be restored.
-        <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST.
-        <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory
-capacity for machine low on resource that are not available to complete setup
-filesystem step correctly (problably if a resize partition is used on FAT fs).
-allow Mounting swap on customized mode too.
-      A legend for partition type colors is available
-(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a
-partition or change its type (only available in advanced mode).
-
-      <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to
-format with click boxes. Some are defined according to type of partitions and if
-the partition has been created or taken back.
-If a partition has already been formated, it is not proposed, or if it should
-not be proposed (alrady existing partition like /mnt/windows).
-On Advanced tag, an additional dialog is displayed to select partition to format
-(all available partition listed) and to format them with bad block checking.
-
-      <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be
-<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available.
-This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages.
-On all mode, display groups and main desktop used (KDE or Gnome), an
-individual package selection check box is available to allow selecting package
-individually. In this case, a dialog displaying a tree with groups, (Mandrake
-first choice/alternatives) and packages is shown on the left part, a description
-window for each packages is shown on the right part.
-
-      <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display
-installation progression. include if available and on a CD basis a spash screen
-of advertising and other (pub!).
-
-      <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for
-Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor.
-At each values chosen (list boxes displayed a
-synthesis description) the current dialog is removed from screen and specific
-configuration panels are displayed (like currently for mouse, keyboard ...).
-And end of these specific configuration panels, this one is remapped on screen
-to be accepted in general.
-
-      <b>Sub steps of Hardware panel:</b>
-
-        <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been
-moved (so unsafe detection), but have to be displayed earlier. A mouse tree
-selection for type is displayed with default case as what is probed or
-<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse
-modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial
-port dialog for serial mice (default mouse connected to COM1 if nothing found).
-Then a mouse screen control is chown (according to mouse capacity: 3 buttons
-with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to
-next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for
-type).
-
-        <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to
-TimeZone definition (itself defaulting to language selection at the beginning).
-A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to
-<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and
-return to the same <font color="#000080"><i>Hardware panel</i></font> dialog.
-
-        <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to
-language selection. A timezone tree selection is shown with only the subtree
-corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font>
-validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid
-the change before returning to the same main dialog.
-
-        <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available.
-
-        <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available.
-
-        <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max
-resolution and depth displayed. No change available.
-
-
-      Miscellaneous step have been removed and dispatched to other steps. "Use
-hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose
-security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and
-<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step.
-<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options.
-
-      <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should
-display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and
-for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too.
-
-      <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in
-both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration
-entries are shown with the following:
-        <font color="#000080"><i>Configure a normal modem connection</i></font>
-        <font color="#000080"><i>Configure an ISDN connection</i></font>
-        "Configure a DSL (or ADSL) connection
-        <font color="#000080"><i>Configure a cable connection</i></font>
-        <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font>
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font>
-        <font color="#000080"><i>Done</i></font>
-      By cliking on a specific item, another dialog is displayed to configure
-some specific part of the network.
-        <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a
-modem if not already detected, then if none are found or probe has been refused
-a list of possible serial device are listed (in the form ttySx / COM(x+1) with
-the current mouse device removed if it is serial). After that a dialog including
-all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>,
-<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font>
-and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and
-<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of
-testing TO BE DEFINED). If no DNS are given, the connection is configured to try
-using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available.
-        <font color="#000080"><i>Configure an ISDN connection</i></font>:
-Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI
-card, and gives the list of the cards. Information are then asked: 
-<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0
-<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1
-<font color="#000080"><i>Your personal phone number</i></font> phone
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider phone number</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Dialing mode</i></font> auto or manual
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>:
-The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN.
-If there is more than one ethernet card, The user must choose the card to use
-(displayed with the module). After that, some informations are asked:
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN
-        <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question
-about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons.
-<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with
-<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous
-question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is
-displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for
-IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then
-if DHCP has been chosen, only a dialog asking for Host name and another for HTTP
-proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be
-defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway
-device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As
-network configuration may to have been reworked a bit it has TO BE DEFINED if
-this is kept like that or not.
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle
-networking on or off, may be to be accessible only for advanced mode.
-        <font color="#000080"><i>Quit</i></font> exit the network step.
-
-<b>NETWORK ADVANCED DOCUMENTATION:</b>
-Here is a list of entry points available in post install without using the ugly
-install graphic toolkit:
-
-<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a>
-
-      <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only
-activated if a local printer is detected, else no printer are configured by
-default. In customized mode or if the step has been clicked a list of printer
-already configured is displayed and the possibility to add or exit the
-configuration. It allow configuration of printers for both LPR and CUPS
-individually (available by advanced mode when adding a printer). Printer
-protocol managed are local/usb/samba/ncp/lpd for LPR and
-local/usb/serial/samba/lpd/cups_network for CUPS.
-
-      <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In
-recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the root password. In advanced mode, a Use NIS (yellow pages) check
-boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No
-password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low"
-security level or less. The length of the minimal password depend upon security level.
-
-In corporate firewall :
-      <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only
-      displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the admin password. 
-The length of the minimal password depend upon security level. (double of the
-      security level)
-
-      <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode
-display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon
-choices as graphical. For customized mode a shell combo is available to choose a
-specific shell for the user depending on the package installed. The real name is
-the user friendly name of the user whereas user name is its login id name. The
-box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font>
-button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or
-higher security level implies the creation of at least one user. Password length
-are subject to same restriction according to security level. In advanced mode,
-allow to choose the user in auto login mode.
-
-      <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this
-step is automatically done by doing nothing. If clicked or customized mode, the
-user is prompted to allow building a boot disk (default is yes). In advanced
-mode allow selection of floppy drive.
-
-      <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this
-step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the
-various boot device that can be used where the bootloader can be installed. The
-boot device can the Linux description of the whole disk available (ex: /dev/hda)
-or partition available in these disk or floppy drives. Other platform
-specificity are not listed here.
-      LBA check box is displayed in advanced mode (enabled by default) to
-allow using LBA addressing if available (PC with LILO). bootloader combo to
-select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text
-menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO
-with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry
-field is available with default value current setting (upgrade) or 5 else.
-<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too,
-<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too.
-Boot in graphical mode (init 5) is available here in advanced mode too
-(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>,
-<font color="#000080"><i>Restrict command line options</i></font> check box is displayed.
-Video mode combo list text mode and video mode used for frame buffer, video mode
-used for frame buffer are available only if the install managed to boot with
-frame buffer activated. Password are restricted according to security level as
-other password. Password are mandatory according to security level TO BE DEFINED.
-
-      <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode,
-everything is done automatically if possible up to test of graphic card, and if
-the user accept the settings no more question are asked to him. In customized
-mode a dialog is displayed to choose resolution, color depth and which version
-of XFree (with 3D optionally) is available for the current card where only a
-short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the
-first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration
-window allowing to change Monitor, Graphic card, Server options or Resolution
-with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions
-according to card (with onboard memory) only and no more monitor capabilities.
-      The main dialog is a list of command to change some X configuration aspect
-according to advanced mode or not :
-        <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one
-is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available.
-        <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where
-default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font>
-is chosen, then a tree of server/driver is displayed containing available server
-for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates
-change.
-        <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list
-of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available.
-        <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server
-version chosen (relative to Xdrakres too).
-        <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current
-configuration internals of X.
-        <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X.
-        <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin
-and window manager to use are asked on Add user step.
-
-      <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always
-executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step
-have not been executed/completed correctly, a question dialog ask the user if he
-really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access
-to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX &lt; 8.0. This is just a
-question asking the user to generate an auto install floppy automatically.
-</pre>
-</body>
-</html>
diff --git a/docs/wizard.doc b/docs/wizard.doc
deleted file mode 100644
index 0bbf8d254..000000000
--- a/docs/wizard.doc
+++ /dev/null
@@ -1,31 +0,0 @@
-How to handle wizard?
-
-to switch in wizard mode:
-set $::isWizard to true;
-if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step
-if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step
-
-how to code:
-Code as if there were no wizard.
-OK button is displayed as Next
-Cancel is displayed as Previous
-a additional button Cancel is added, xhich die with the exception 'wizard_cancelled'
-
-You have to handle the previous button. For example:
-
-step 1:
-ask_from list( blablablabl) or return;
-step2:
-ask_from list( blablablabl) or goto step1;
-step3:
-ask_from list( blablablabl) or goto step2;
-
-etc... You don't have to handle the wizard Cancel button as it send an exception.
-
-Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually.
-
-plop.
-
-dam's, pour vous servir
-
-
diff --git a/help.msg.xml b/help.msg.xml
deleted file mode 100644
index c20ea01c8..000000000
--- a/help.msg.xml
+++ /dev/null
@@ -1,22 +0,0 @@
-<document>
-                  <green>Welcome to <blue>Mandrake Linux</blue> install help</green>
-
-In most cases, the best way to get started is to simply press the <yellow>&lt;Enter&gt;</yellow> key.
-If you experience problems with standard install, try one of the following 
-install types (type the highlighted text and press <yellow>&lt;Enter&gt;</yellow>):
-
- o  <white>vgalo</white> for low resolution graphical installation.
- o  <white>text</white> for text installation instead of the graphical one.
- o  <white>linux</white> for standard graphical installation at normal resolution.
- o  <white>expert</white> for expert graphical installation at normal resolution.
-
-
-To repair an already installed system type <white>rescue</white> followed
-by <yellow>&lt;Enter&gt;</yellow>.
-
-You can also pass some <white>&lt;specific kernel options&gt;</white> to the Linux kernel. 
-For example, try <white>linux noapic</white> if your system has trouble operating
-your network adapter correctly.
-<red>NOTE</red>: You cannot pass options to modules (SCSI, ethernet card) or devices
-such as CD-ROM drives in this way. If you need to do so, use expert mode.
-</document>
diff --git a/isolinux-graphic-simple.bmp b/isolinux-graphic-simple.bmp
deleted file mode 100644
index 2faf02440..000000000
--- a/isolinux-graphic-simple.bmp
+++ /dev/null
diff --git a/isolinux-graphic.bmp b/isolinux-graphic.bmp
deleted file mode 100644
index 061df75cb..000000000
--- a/isolinux-graphic.bmp
+++ /dev/null
diff --git a/kernel/.cvsignore b/kernel/.cvsignore
deleted file mode 100644
index 827e0ba13..000000000
--- a/kernel/.cvsignore
+++ /dev/null
@@ -1,3 +0,0 @@
-modules.description
-all.modules
-all.kernels
diff --git a/kernel/Makefile b/kernel/Makefile
deleted file mode 100644
index a821d3939..000000000
--- a/kernel/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-all: all.modules
-
-all.modules: ../mdk-stage1/mar/mar update_kernel list_modules.pm
-	`../tools/specific_arch ./update_kernel`
-
-../mdk-stage1/mar/mar:
-	make -C `dirname $@` mar
-
-clean:
-	rm -rf *~ modules.description all.modules all.modules64
-
-check:
-	perl modules.pl check > /dev/null
diff --git a/kernel/check_mar.pl b/kernel/check_mar.pl
deleted file mode 100755
index 7b9fefbbf..000000000
--- a/kernel/check_mar.pl
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-my $mar = '../mdk-stage1/mar/mar';
--x $mar or die "ERROR: Sorry, need $mar binary\n";
-
-my %sanity_check = (
-    cdrom => [ 
-	qw(aic7xxx),
-	if_(arch() !~ /ppc|x86_64/, 'advansys'),
-    ],
-    all => [ 
-	qw(3c59x eepro100 tulip via-rhine ne2k-pci 8139too), 
-	if_(arch() !~ /ppc/, 'e100'), 
-	if_(arch() !~ /ppc|ia64/, 'tlan'),
-    ],
-);
-
-my $main_version = chomp_(cat_("all.kernels/.main"));
-
-foreach (keys %sanity_check) {
-    my $marfile = "all.modules/$main_version/${_}_modules.mar";
-    -e $marfile or die "ERROR: missing $marfile\n";
-
-    my @l = map { /(\S+)\.k?o/ } `$mar -l $marfile`;
-    my @pbs = difference2($sanity_check{$_}, \@l);
-
-    @pbs and die "ERROR: sanity check should prove that " . join(" ", @pbs) . " be part of $marfile\n";
-}
diff --git a/kernel/dependencies.pl b/kernel/dependencies.pl
deleted file mode 100644
index e3be14212..000000000
--- a/kernel/dependencies.pl
+++ /dev/null
@@ -1,13 +0,0 @@
-use strict;
-
-use MDK::Common;
-use list_modules;
-
-my $version = shift @ARGV;
-my $depfile = shift @ARGV;
-load_dependencies($depfile);
-print STDERR "Loaded dependencies from $depfile\n";
-
-my @modules = uniq(map { dependencies_closure($_) } @ARGV);
-print join " ", map { $_ . ($version == 24 ? '.o' : '.ko') } @modules;
-print "\n";
diff --git a/kernel/list_modules.pm b/kernel/list_modules.pm
deleted file mode 100644
index f3dffd01b..000000000
--- a/kernel/list_modules.pm
+++ /dev/null
@@ -1,228 +0,0 @@
-package list_modules;
-
-use MDK::Common;
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(load_dependencies dependencies_closure category2modules module2category sub_categories);
-
-# the categories have 2 purposes
-# - choosing modules to include on stage1's (cf update_kernel and mdk-stage1/pci-resource/update-pci-ids.pl)
-# - performing a load_category or probe_category (modules.pm and many files in perl-install)
-
-our %l = (
-  ################################################################################
-  network => 
-  {
-    main => [
-      if_(arch() =~ /ppc/, qw(mace bmac gmac)),
-      if_(arch() =~ /^sparc/, qw(sunbmac sunhme sunqe)),
-      if_(arch() !~ /alpha|sparc/,
-        qw(3c501 3c503 3c505 3c507 3c509 3c515 3c90x),
-	qw(82596 abyss ac3200 acenic aironet4500_card at1700 atp com20020-pci),
-        qw(cs89x0 de600 de620),
-        qw(defxx), # most unused
-        qw(depca dgrs dmfe e100 e2100 eepro eepro100 eexpress epic100 eth16i),
-        qw(ewrk3 hamachi hp hp-plus hp100 ibmtr),
-        qw(lance natsemi ne ne2k-pci ni5010 ni52 ni65 nvnet olympic pcnet32 plip rcpci),
-        qw(sb1000 sis900 smc-ultra smc9194 starfire tlan tmspci tulip via-rhine),
-        qw(wd winbond-840 forcedeth),
-	qw(fealnx 3c990 3c990fx b44 bcm4400),
-        qw(skfp tc35815 lanstreamer farsync sdladrv prism2_plx),
-
-	qw(iph5526), #- fibre channel
-      ),
-      qw(3c59x 8139too 8139cp sundance), #rtl8139
-    ],
-    gigabit => [
-      qw(dl2k myri_sbus yellowfin ns83820 r8169 tg3 e1000 sk98lin),
-      qw(bcm5820 bcm5700), #- encrypted
-    ],
-
-    raw => [
-      qw(ppp_generic ppp_async),
-    ],
-    pcmcia => [ 
-      qw(3c574_cs 3c589_cs axnet_cs fmvj18x_cs),
-      qw(ibmtr_cs nmclan_cs pcnet_cs smc91c92_cs),
-      qw(xirc2ps_cs xircom_cb xircom_tulip_cb),
-    ],
-    usb => [ 
-      qw(catc CDCEther kaweth pegasus rtl8150 usbnet),
-    ],
-    wireless => [
-      qw(acx100_pci airo airo_cs aironet4500_cs aironet_cs at76c503 at76c503-rfmd atmel_cs),
-      qw(hermes ipw2100 madwifi_pci netwave_cs orinoco orinoco_cs orinoco_pci orinoco_plx),
-      qw(prism2_usb prism54 ray_cs usbvnet_rfmd vt_ar5k wavelan_cs wvlan_cs),
-      if_(arch() =~ /ppc/, qw(airport)),
-    ],
-    isdn => [
-      qw(b1pci c4 hisax hisax_fcpcipnp hysdn t1pci tpam divas),
-    ],
-  },
-
-  ################################################################################
-  disk => 
-  {
-    scsi => [
-      if_(arch() =~ /ppc/, qw(mesh mac53c94)),
-      if_(arch() =~ /^sparc/, qw(qlogicpti)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        qw(3w-xxxx AM53C974 BusLogic NCR53c406a a100u2w advansys aha152x aha1542 aha1740),
-        qw(atp870u dc395x_trm dtc g_NCR5380 in2000 initio pas16 pci2220i psi240i fdomain),
-        qw(qla1280 qla2x00 qlogicfas qlogicfc),
-        qw(seagate wd7000 sim710 sym53c416 t128 tmscsim u14-34f ultrastor),
-        qw(eata eata_pio eata_dma mptscsih nsp32),
-        qw(ata_piix sata_promise sata_svw sata_via),
-      ),
-      '53c7,8xx',
-      qw(aic7xxx aic7xxx_old aic79xx pci2000 qlogicisp sym53c8xx lpfcdd), # ncr53c8xx
-    ],
-    hardware_raid => [
-      if_(arch() =~ /^sparc/, qw(pluto)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        qw(DAC960 dpt_i2o megaraid aacraid cciss cpqarray gdth i2o_block),
-	qw(cpqfc qla2200 qla2300 pdc-ultra),
-        qw(ips ppa imm),
-       if_(c::kernel_version =~ /^\Q2.4/,
-	qw(ataraid hptraid silraid pdcraid)
-       ),
-      ),
-    ],
-    pcmcia => [ qw(aha152x_cs fdomain_cs nsp_cs qlogic_cs ide-cs) ], #ide_cs
-    raw => [ qw(scsi_mod sd_mod) ],
-    usb => [ qw(usb-storage) ],
-    firewire => [ qw(eth1394 sbp2) ],
-    cdrom => [ qw(ide-cd cdrom sr_mod) ],
-  },
-
-  ################################################################################
-
-  bus => 
-  {
-    usb => [ qw(usbcore usb-uhci usb-ohci ehci-hcd uhci-hcd ohci-hcd usbkbd keybdev input) ],
-    firewire => [ qw(ohci1394 ieee1394) ],
-    pcmcia => [
-      if_(arch() !~ /^sparc/, qw(pcmcia_core tcic ds i82365 i82092 yenta_socket)), # cb_enabler
-    ],
-   #serial_cs
-   #ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd
-   #cb_enabler
-  },
-
-  fs => 
-  {
-    network => [ qw(af_packet nfs lockd sunrpc) ],
-    cdrom => [ qw(isofs) ],
-    loopback => [ qw(isofs loop), if_($ENV{MOVE}, qw(cryptoloop gzloop supermount)) ],
-    local => [
-      if_(arch() =~ /^i.86|x86_64/, qw(vfat fat ntfs)),
-      if_(arch() =~ /^ppc/, qw(hfs)),
-      qw(reiserfs),
-    ],
-    various => [ qw(smbfs romfs jbd xfs) ],
-
-  },
-
-  ################################################################################
-  multimedia => 
-  {
-    sound => [
-      if_(arch() =~ /ppc/, qw(dmasound_pmac)),
-      if_(arch() !~ /^sparc/,
-        qw(ad1816 ad1848 ad1889 ali5455 awe_wave audigy cmpci cs46xx cs4232 cs4281 emu10k1 es1370 es1371 esssolo1 forte),
-	qw(gus i810_audio ice1712 kahlua mad16 maestro maestro3 mpu401 msnd_pinnacle nvaudio opl3 opl3sa opl3sa2 nm256_audio),
-        qw(pas2 pss rme96xx sb sgalaxy sam9407 sonicvibes sscape trident via82cxxx_audio wavefront ymfpci),
-        qw(snd-ali5451 snd-als100 snd-als4000 snd-azt2320 snd-azt3328 snd-cmi8330 snd-cmipci),
-	   qw(snd-cs4231 snd-cs4232 snd-cs4236 snd-cs46xx snd-dt0197h snd-cs4281 snd-emu10k1),
-	   qw(snd-ad1816a snd-ad1848 snd-gusclassic snd-gusextreme snd-gusmax snd-interwave),
-	   qw(snd-mpu401 snd-opti93x snd-rme9652 snd-sb8 snd-sbawe),
-	   qw(snd-ens1370 snd-ens1371 snd-es18xx snd-es968 snd-es1938 snd-es1968 snd-es1688),
-        qw(snd-fm801 snd-hdsp snd-ice1712 snd-ice1724 snd-intel8x0 snd-korg1212 snd-maestro3),
-	   qw(snd-nm256 snd-rme96 snd-rme32 snd-opl3sa2 snd-sb16 snd-sgalaxy snd-sonicvibes),
-        qw(snd-trident audio snd-via82xx snd-vx222 snd-wavefront snd-ymfpci),
-        qw(snd-au8810 snd-au8820 snd-au8830),
-      ),
-    ],
-    tv => [ qw(bttv cpia_usb cyber2000fb ibmcam mod_quickcam ov511 ov518_decomp pwc saa7134 ultracam usbvideo) ],
-    photo => [ qw(dc2xx mdc800) ],
-    radio => [ qw(radio-maxiradio) ],
-    scanner => [ qw(scanner microtek) ],
-    joystick => [ qw(ns558 emu10k1-gp iforce) ],
-  },
-
-  various => 
-  # just here for classification, unused categories (nor auto-detect, nor load_thiskind)
-  {
-    raid => [
-      qw(linear raid0 raid1 raid5 lvm-mod md multipath xor),
-    ],
-    mouse => [
-      qw(busmouse msbusmouse logibusmouse serial qpmouse atixlmouse),
-    ],
-    char => [
-      if_(arch() =~ /ia64/, qw(efivars)),
-      qw(amd768_rng applicom n_r3964 nvram pc110pad ppdev),
-      qw(mxser moxa isicom wdt_pci epca synclink istallion sonypi i810-tco sx), #- what are these???
-    ],
-    other => [
-      qw(defxx i810_rng i810fb ide-floppy ide-scsi ide-tape loop lp nbd sg st),
-      qw(parport parport_pc parport_serial),
-      qw(btaudio),
-
-      #- these need checking
-      qw(pcilynx sktr rrunner meye 3c559 buz paep),
-    ],
-    agpgart => [
-      if_(arch() =~ /alpha/, qw(alpha-agp)),
-      if_(arch() =~ /ia64/, qw(hp-agp i460-agp)),
-      if_(arch() =~ /ppc/, qw(uninorth-agp)),
-
-      qw(agpgart ali-agp amd64-agp amd-k7-agp ati-agp intel-agp),
-	 qw(nvidia-agp sworks-agp sis-agp via-agp),
-    ],
-  },
-);
-
-my %dependencies;
-
-sub load_dependencies {
-    my ($file) = @_;
-
-    %dependencies = map {
-	my ($f, $deps) = split ':';
-	$f => [ split ' ', $deps ];
-    } cat_($file);
-}
-
-sub dependencies_closure {
-    my @l = map { dependencies_closure($_) } @{$dependencies{$_[0]} || []};
-    (@l, $_[0]);
-}
-
-sub category2modules {
-    map {
-	my ($t1, $t2s) = m|(.*)/(.*)|;
-	map { 
-	    my $l = $l{$t1}{$_} or die "bad category $t1/$_\n" . backtrace();
-	    @$l;
-	} split('\|', $t2s);
-    } split(' ', $_[0]);
-}
-
-sub module2category {
-    my ($module) = @_;
-    foreach my $t1 (keys %l) {
-	my $h = $l{$t1};
-	foreach my $t2 (keys %$h) {
-	  $module eq $_ and return "$t1/$t2" foreach @{$h->{$t2}};
-      }
-    }
-    return;
-}
-
-sub sub_categories {
-    my ($t1) = @_;
-    keys %{$l{$t1}};
-}
-
-1;
diff --git a/kernel/modules.pl b/kernel/modules.pl
deleted file mode 100644
index edca4f713..000000000
--- a/kernel/modules.pl
+++ /dev/null
@@ -1,201 +0,0 @@
-use strict;
-
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|/[^/]*$||;
-    push @INC, $f;
-}
-
-use MDK::Common;
-use list_modules;
-
-#- seldom used modules
-#- we don't bother making a special floppy for those
-my %modules_only_for_all_img = (
-
-  'network/main' => [
-    qw(olympic acenic),
-    qw(aironet4500_card com20020-pci hamachi starfire winbond-840),
-
-    # token ring
-    qw(tmspci ibmtr abyss),
-
-    if_(arch() =~ /x86_64/, qw(orinoco_plx)), # don't support laptop for now
-    if_(arch() =~ /x86_64/, qw(hp100 epic100)), # old (nico)
-    if_(arch() =~ /alpha|ppc/, qw(sb1000)),
-    qw(iph5526),
-
-    qw(ac3200 at1700 atp ni5010 ni52 ni65),  #- unused from Jeff
-  ],
-
-  'bus/pcmcia' => [
-    if_(arch() =~ /x86_64/, qw(pcmcia_core ds tcic yenta_socket)), # don't support laptop for now
-    if_(arch() =~ /x86_64/, qw(i82092 i82365)), # doco says "older laptops"
-  ],
-
-  'disk/scsi' => [
-    # ISA cards:
-    qw(NCR53c406a aha152x psi240i qlogicfas qlogicfc wd7000 sim710 t128 ultrastor), '53c7,8xx',
-    qw(qla2x00 in2000 pas16 a100u2w seagate g_NCR5380),
-    if_(arch() =~ /x86_64/, qw(53c7,8xx nsp32 initio advansys atp870u)), #- old
-    qw(AM53C974), # deprecated by tmscsim
-    qw(u14-34f), #- duplicate from ultrastor.o
-    #- still used, keeping them: qw(aha1542 sym53c416),
-    qw(lpfcdd), #- HUGE!!
-
-    qw(dc395x_trm mptscsih BusLogic fdomain),
-    qw(pci2220i eata eata_pio eata_dma),
-    'aic7xxx_old', 'qlogicisp',
-    'dtc',
-  ],
-
-  'disk/hardware_raid' => [
-    if_(arch() =~ /x86_64/, qw(ataraid)), #- old
-    qw(i2o_block qla2200 qla2300 cpqfc DAC960 gdth pdc-ultra),
-  ],
-);
-
-#- modules that will only be available in stage2
-#-   those modules are NOT in all.img, network.img...
-#-   there should only be modules that can't be used on stage1
-#-   completly unused modules should be removed directly from the kernel
-#-     (and so be removed from stage2 too)
-my %modules_removed_from_stage1 = (
-  'network/main' => [
-     'plip'
-  ],
-
-  'disk/hardware_raid' => [
-    qw(imm ppa),
-  ],
-);
-
-my @modules_always_on_stage1 = qw(floppy);
-
-
-sub flatten_and_check {
-    my ($h) = @_;
-    map { 
-	my $category = $_;
-	my @l = @{$h->{$category}};
-	if (my @bad = difference2(\@l, [ category2modules($category) ])) {
-	    foreach (@bad) {
-		if (my $cat = module2category($_)) {
-		    warn "ERROR in modules.pl: module $_ is in category $cat, not in $category\n";
-		} else {
-		    warn "ERROR in modules.pl: unknown module $_\n";
-		}
-	    }
-	    exit 1;
-	}
-	@l;
-    } keys %$h;
-}
-
-my @modules_only_for_all_img    = flatten_and_check(\%modules_only_for_all_img);
-my @modules_removed_from_stage1 = flatten_and_check(\%modules_removed_from_stage1);
-
-
-my %images = (
-    pcmcia  => 'fs/cdrom disk/cdrom|raw|pcmcia bus/pcmcia',
-    cdrom   => 'fs/cdrom disk/cdrom|raw|scsi',
-    network  => 'bus/usb|pcmcia disk/raw|usb',
-    network_drivers => 'fs/network network/main|pcmcia|usb|raw|gigabit',
-    all     => 'fs/cdrom disk/cdrom|raw bus/usb disk/usb|scsi fs/loopback|local bus/pcmcia disk/pcmcia|hardware_raid fs/network network/main|pcmcia|usb|raw|gigabit bus/firewire disk/firewire',
-);
-
-my $verbose = "@ARGV" =~ /-v/;
-images() if "@ARGV" =~ /images/;
-check() if "@ARGV" =~ /check/;
-pci_modules4stage1($1) if "@ARGV" =~ /pci_modules4stage1:(.*)/;
-
-sub images() {
-    while (my ($image, $l) = each %images) {
-	my @modules = if_($image !~ /drivers/, @modules_always_on_stage1);
-	push @modules, map { category2modules($_) } split(' ', $l);
-	
-	@modules = difference2(\@modules, \@modules_removed_from_stage1);
-
-	if ($image !~ /all/) {
-	    @modules = difference2(\@modules, \@modules_only_for_all_img);
-	}
-	printf qq(%s_modules_raw="%s"\n), $image, join ' ', @modules;
-    }
-    printf qq(images="%s"\n), join(' ', keys %images);
-}
-
-sub pci_modules4stage1 {
-    print "$_\n" foreach uniq(map { dependencies_closure($_) } difference2([ category2modules($_[0]) ], \@modules_removed_from_stage1));
-}
-
-sub check() {
-    my $error;
-    my %listed;
-    while (my ($t1, $l) = each %list_modules::l) {
-	while (my ($t2, $l) = each %$l) {
-	    ref $l or die "bad $l in $t1/$t2";
-	    foreach (@$l) {
-		$listed{$_} = "$t1/$t2"; 
-	    }
-	}
-    }
-
-    my %module2category;
-    my %deprecated_modules = %listed;
-    my $not_listed = sub {
-	my ($msg, $verbose, @l) = @_;
-	my %not_listed;
-	foreach (@l) {
-	    my ($mod) = m|([^/]*)\.k?o(\.gz)?$| or next;
-	    delete $deprecated_modules{$mod};
-	    next if $listed{$mod};
-	    s|.*?mdk(BOOT)?/||;
-	    s|kernel/||; s|drivers/||; s|3rdparty/||;
-	    $_ = dirname $_;
-	    $_ = dirname $_ if $mod eq basename($_);
-	    $module2category{$mod} = $_;
-	    push @{$not_listed{$_}}, $mod;
-	}
-	if ($verbose) {
-	    print "$msg $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	}
-    };
-    $not_listed->('NOT LISTED', 1, `cd all.kernels/2.6* ; find -name "*.k?o" -o -name "*.k?o.gz"`);
-    $not_listed->('not listed', $verbose, `rpm -qpl /RPMS/kernel-2.6*`);
-    if (%deprecated_modules) {
-	my %per_cat;
-	push @{$per_cat{$listed{$_}}}, $_ foreach keys %deprecated_modules;
-	foreach my $cat (sort keys %per_cat) {
-	    print "bad/old modules ($cat) : ", join(" ", sort @{$per_cat{$cat}}), "\n";
-	}
-    }
-
-    {
-	require '/usr/bin/merge2pcitable.pl';
-	my $pcitable = read_pcitable("/usr/share/ldetect-lst/pcitable");
-	my $usbtable = read_pcitable("/usr/share/ldetect-lst/usbtable");
-
-	my @l1 = uniq grep { !/:/ && $_ ne 'unknown' } map { $_->[0] } values %$pcitable;
-	if (my @l = difference2(\@l1, [ keys %listed ])) {
-	    my %not_listed;
-	    push @{$not_listed{$module2category{$_}}}, $_ foreach @l;
-	    if (my $l = delete $not_listed{''}) {
-		print "bad/old pcitable modules : ", join(" ", @$l), "\n";
-	    }
-	    print STDERR "PCITABLE MODULES NOT LISTED $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	    #$error = 1;
-	}
-
-	my @l2 = uniq grep { !/:/ && $_ ne 'unknown' } map { $_->[0] } values %$usbtable;
-	if (my @l = difference2(\@l2, [ keys %listed ])) {
-	    my %not_listed;
-	    push @{$not_listed{$module2category{$_}}}, $_ foreach @l;
-	    if ($verbose) {
-		print "usbtable modules not listed $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	    }
-	}
-    }
-
-    exit $error;
-}
diff --git a/kernel/strip_modules b/kernel/strip_modules
deleted file mode 100755
index 98e4f4496..000000000
--- a/kernel/strip_modules
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/bin/sh
-#
-#	Given a list of objects, strip all static symbols except those
-#	required by insmod.
-#
-#	Copyright Keith Owens <kaos@ocs.com.au>.  GPL.
-#	Sat Feb  1 12:52:17 EST 1997
-#	
-#	Mainly intended for reducing the size of modules to save space
-#	on emergency and install disks.  Be aware that removing the
-#	static symbols reduces the amount of diagnostic information
-#	available for oops.  Not recommended for normal module usage.
-#
-#	This code requires the modules use MODULE_PARM and EXPORT_.
-#	Do not strip modules that have not been converted to use
-#	MODULE_PARM or are using the old method of exporting symbols.
-#	In particular do not use on modules prior to 2.1.20 (approx).
-#
-#	The objects are stripped in /tmp, only if the strip works is
-#	the original overwritten.  If the command line to strip the
-#	symbols becomes too long, the strip is done in multiple passes.
-#	Running strip_module twice on the same object is safe (and a
-#	waste of time).
-#
-
-sizeofptr="/tmp/$$.sizeofptr"
-echo 'int main() { return sizeof(void *); }' | gcc -xc - -o $sizeofptr
-$sizeofptr
-export SIZEOF_POINTER=$?
-rm -f $sizeofptr
-
-cat > /tmp/$$.awk <<\EOF
-BEGIN	{
-	strip = "/usr/bin/objcopy";
-	nm = "/usr/bin/nm";
-	cp = "/bin/cp";
-	mv = "/bin/mv";
-	rm = "/bin/rm";
-	tmp = "/tmp";
-	command_size = 400;	# arbitrary but safe
-
-	getline < "/proc/self/stat";
-	pid = $1;
-	tmpcopy = tmp "/" pid ".object";
-	nmout = tmp "/" pid ".nmout";
-
-	for (i = 1; i < ARGC; ++i)
-		strip_module(ARGV[i]);
-
-	do_command(rm " -f " tmpcopy " " nmout);
-
-	exit(0);
-}
-
-function strip_module(object,
-	keep_symbol, to_strip, symbol, command, changed) {
-	do_command(cp " -a " object " " tmpcopy);
-	do_command(nm " " tmpcopy " > " nmout);
-	# delete array_name sometimes breaks, internal error, play safe
-	for (symbol in keep_symbol)
-		delete keep_symbol[symbol];
-	for (symbol in to_strip)
-		delete to_strip[symbol];
-	new_module_format = 0;
-	ptrskip = 2 + 2 * ENVIRON["SIZEOF_POINTER"];
-	while ((getline < nmout) > 0) {
-		$0 = substr($0, ptrskip);
-		# b static variable, uninitialised
-		# d static variable, initialised
-		# r static array, initialised
-		# t static label/procedures
-		if ($1 ~ /[bdrt]/)
-			to_strip[$2] = "";
-		else if ($2 ~ /R __ksymtab_/)
-			keep_symbol[substr($2, 11)] = "";
-		else if ($0 ~ /R __module_parm_/)
-			keep_symbol[substr($2, 15)] = "";
-		else if ($1 != "?")
-			keep_symbol[$2] = "";
-		if ($2 ~ /__module/)
-			new_module_format = 1;
-	}
-	close(nmout);
-	command = "";
-	changed = 0;
-	failure = 0;
-	if (new_module_format) {
-		for (symbol in to_strip) {
-			if (!(symbol in keep_symbol)) {
-				changed = 1;
-				if (length(command) > command_size) {
-					failure = failure || do_command(strip command " " tmpcopy);
-					command = "";
-				}
-				command = command " --strip-symbol=" symbol;
-			}
-		}
-	}
-	if (command != "") {
-		changed = 1;
-		failure = failure || do_command(strip command " " tmpcopy);
-	}
-	if (changed && !failure)
-		do_command(mv " " tmpcopy " " object);
-}
-
-function do_command(command) {
-	if ((ret = system(command)) != 0) {
-		giveup("command \"" command "\" failed " ret, ret);
-		return 1;
-	}
-	return 0;
-}
-
-function giveup(message, ret) {
-	print "strip_module: " message > "/dev/stderr";
-#	exit(ret);
-}
-EOF
-
-awk -f /tmp/$$.awk "$@"
-ret=$?
-rm -f /tmp/$$.awk
-exit $ret
diff --git a/kernel/update_kernel b/kernel/update_kernel
deleted file mode 100755
index 9c2145e21..000000000
--- a/kernel/update_kernel
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/bin/bash
-
-ALL_KERNELS="all.kernels"
-RPMS=/export/Mandrake/RPMS
-
-ARCH=`uname -m | sed -e 's/i.86/i386/' -e 's/sparc.*/sparc/'`
-
-
-# move stuff to this new "kernel" directory
-if [ ! -d all.kernels ]; then
-  if [ -d ../all.kernels ]; then
-  mv ../all.kernels .
-  rm -rf ../all.modules
-  else
-    # make sure "all.kernels" directory exists
-    mkdir all.kernels
-  fi
-fi
-
-function create_marfile() {
-    marfile=$1
-    shift
-    $GIBASEDIR/mdk-stage1/mar/mar -c $marfile $*
-}
-
-function build_kernel_is_26() { 
-    uname -r | grep -q '^2\.6'
-}
-
-function kern_version() {
-    if echo $1 | grep -q ^2.4; then
-        version=24
-        objects="*.o"
-    else
-        version=25
-        objects="*.ko"
-    fi
-}
-    
-function create_modules() {
-    kernel_path=$1
-    kern=$2
-    echo "Updating modules in '`pwd`' for kernel '$kern'"
-    kern_version $kern
-    find $kernel_path/lib/modules/ -name "$objects" -exec cp -f {} . \;
-    if [ $version -eq 24 ]; then
-        /sbin/depmod-24 -F $kernel_path/boot/System.map* -e *.o | perl -pe 's/\\\n//' \
-            | perl -ne 's/\.o//g; s/[ \t]+/ /g; print if /: /' > modules.dep
-    else
-        cp $kernel_path/lib/modules/*/modules.dep .
-        perl -ni -e 's|/\S+/([^/]+)\.k?o(\.gz)|$1|g; print if /: /' modules.dep
-    fi
-    perl -pi -e 's/((plip|ppa|imm): parport)/$1 parport_pc/' modules.dep
-
-    if build_kernel_is_26; then
-	/sbin/modinfo $objects | perl -lne 'print "$name\t$1" if $name && /^description:\s*(.*)/; $name = $1 if m!^filename:\s*(.*)\.k?o!' > modules.description
-    else
-	/sbin/modinfo-$version -f '%{filename} %{description}\n' $objects | perl -lne 'print "$1\t$2" if /(.*?)\.k?o "(.*)"/' > modules.description
-    fi
-}
-
-function create_modules_mar() {
-    kern_version $kern
-
-    if [ $version -eq 24 ]; then
-        echo -n "stripping $kern: "
-        $GIBASEDIR/kernel/strip_modules *.o 2>/dev/null
-        echo "done"
-    else
-        echo "don't strip on 2.6 since it breaks modules"
-    fi
-
-    if [ -z "$MOVE" ]; then
-        echo -n "packdrake $kern: "
-        ls $objects | packdrake -b9s "modules.cz" 400000
-        echo "done"
-        mv modules.cz ../modules.cz-$kern
-    fi
-    for i in $images; do
-        eval "modules=\$${i}_modules_raw"
-        modules_with_deps=`perl -I $GIBASEDIR/kernel $GIBASEDIR/kernel/dependencies.pl $version modules.dep $modules`
-	eval "create_marfile ${i}_modules.mar $modules_with_deps"
-    done
-    echo
-}
-
-function install_kernel() {
-    rpm=$1
-
-    ver=$(rpm -qp --qf '%{name}' $rpm 2>/dev/null | perl -pe 's/kernel(-(BOOT))?-((\.?[0-9]+){3})\.(.*)/$3-$5$2/')
-    [ -n "$ver" ] || return
-    
-    if [ -n "$2" ]; then
-        [ -d $ALL_KERNELS/$ver ] && return
-        main_ver=$2
-	echo Removing previous kernel $ALL_KERNELS/$main_ver*
-        rm -rf $ALL_KERNELS/$main_ver*
-    fi
-    
-    rm -rf $ALL_KERNELS/$ver
-    echo "Installing kernel $ver"
-    mkdir -p $ALL_KERNELS/$ver
-    rpm2cpio $rpm | (cd $ALL_KERNELS/$ver ; cpio -id)
-    
-    find $ALL_KERNELS/$ver -type f -name "*.o.gz" -o -name "*.ko.gz" | xargs gunzip
-    
-    # will get back when make_boot_img is called
-    for dir in /tftpboot /var/lib/tftpboot; do
-        rm -f $dir/{vmlinuz,network.rdz,all.rdz}
-    done
-}
-
-[ -e $ALL_KERNELS/.main ] && main=$(cat $ALL_KERNELS/.main)
-
-if [ "$1" = "--move" ]; then
-    MOVE=1
-    shift
-fi
-
-if [ "$ARCH" == "ia64" ] || [ "$ARCH" == "ppc" ]; then
-    name=kernel
-else 
-    name=kernel-BOOT
-fi
-
-if [ -n "$1" ]; then
-    #- allow specifying a kernel file on commandline (./update_kernel /RPMS/kernel-2.4.22.10mdk-1-1mdk.i586.rpm)
-    install_kernel $1
-else
-    install_kernel $RPMS/kernel-BOOT-2.4*.rpm 2.4
-    install_kernel $RPMS/kernel-BOOT-2.6*.rpm 2.6
-fi
-
-[ -n "$main" -a -e $ALL_KERNELS/$main ] || {
-    cd $ALL_KERNELS
-    main=$(echo 2.6* | sed 's/.* //')
-    [ -e "$main" ] || main=$(echo 2.4* | sed 's/.* //')
-    [ -e "$main" ] || { echo "no kernel installed in $ALL_KERNELS"; exit 1; }
-    echo "Choosing $main"
-    echo $main > .main
-    cd ..
-}
-
-
-if [ "$ARCH" == "i386" ]; then
-    for i in $ALL_KERNELS/*/boot/vmlinuz*; do
-	#disable any existing resolution!!!
-	/usr/sbin/rdev -v $i 65535 #788 #785 
-    done
-fi
-
-
-GIBASEDIR=`pwd`/..
-
-rm -rf all.modules ; mkdir all.modules
-for i in $ALL_KERNELS/*; do
-	kern=`basename $i`
-	(
-	    mkdir all.modules/$kern
-	    cd all.modules/$kern
-
-	    create_modules ../../$i $kern
-	) || exit 1
-done
-cp -f all.modules/$main/modules.description .
-
-l=`MOVE=$MOVE perl modules.pl images` || exit 1
-eval $l
-
-for i in $ALL_KERNELS/*; do
-	kern=`basename $i`
-	(
-	    cd all.modules/$kern
-
-	    if [ "$kern" = "$main" ]; then
-		create_modules_mar ../../$i $kern
-	    else
-		echo "$kern ($main)"
-		create_modules_mar ../../$i $kern 2>/dev/null
-	    fi
-	) || exit 1
-done
-
-
-./check_mar.pl
diff --git a/make_boot_img b/make_boot_img
deleted file mode 100755
index a9eea94a2..000000000
--- a/make_boot_img
+++ /dev/null
@@ -1,824 +0,0 @@
-#!/usr/bin/perl
-
-use Config;
-use MDK::Common;
-Config->import;
-my ($arch) = $Config{archname} =~ /(.*?)-/;
-
-# move stuff to new "kernel" directory
--d 'kernel' or die "directory kernel is missing\n";
-rename 'all.kernels', 'kernel/all.kernels';
-rename 'all.modules', 'kernel/all.modules';
-
-my $default_append = "ramdisk_size=128000 root=/dev/ram3";
-# full acpi support for amd64, enough acpi support for x86 ht, no acpi for others
-my $default_acpi = $arch =~ /i.86/ ? "acpi=ht" : $arch =~ /x86_64/ ? "acpi=off" : "acpi=off";
-my $default_vga = "vga=788";
-
-my $instdir = "mdk-stage1";
-my $tmp_mnt = '/tmp/drakx_mnt';
-my $tmp_mnt_initrd = '/tmp/drakx_mnt2';
-
-my $sudo;
-if ($>) {
-    $sudo = "sudo";
-    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-sub __ { print @_, "\n"; system(@_) }
-sub _ { __ @_; $? and die }
-sub mke2fs { 
-    my ($f) = @_;
-    _ "/sbin/mke2fs -q -m 0 -F -s 1 $f";
-    _ "/sbin/tune2fs -c 0 -U clear -T 1970010101 $f";
-}
-
-_ "$sudo mkdir -p $tmp_mnt $tmp_mnt_initrd";
-mkdir "images";
-
-chomp(my $main = `cat kernel/all.kernels/.main`);
-my @kernels = grep { /^2/ } all('kernel/all.kernels');
-
-
-my @all_images = (
-		  if_($arch =~ /i.86/, 'cdrom.img', 'cdrom-changedisk.img', 'pcmcia.img', 'isolinux', 'boot.iso', 'hd_grub.img', 'network.img', 'network_drivers.img'),
-		  if_($arch =~ /x86_64/, 'cdrom.img', 'isolinux', 'boot.iso'),
-		  if_($arch =~ /ia64/, 'all.img'),
-		 );
-
-my @images = @ARGV ? @ARGV : map { "images/$_" } @all_images;
-
-if (any { /move/ } @images) {
-    -e "$instdir/init-move" or die "ERROR: $instdir not built for move\n";
-} else {
-    -e "$instdir/init-move" and die "ERROR: $instdir built for move\n";
-}
-
-foreach my $img (@images) {
-    my ($type, $I, $extension) = $img =~ m!([^/]*)(64)?\.([^.]*)$!;
-
-    if ($img =~ /hd_grub/) {
-	hd_grub($tmp_mnt, $img);
-    } elsif ($img =~ /isolinux/) {
-	isolinux($main, @kernels);
-
-	if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
-	    system("/bin/cp -f isolinux/alt0/* $tftpboot");
-	}
-    } elsif ($img =~ /move/) {
-	isolinux_move($main);
-
-	if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
-	    system("/bin/cp -f move/isolinux/* $tftpboot/move 2>/dev/null");
-	}
-    } elsif ($img =~ /boot.iso/) {
-	boot_iso($img, 0);
-    } elsif ($img =~ /bootcdrom.iso/) {
-	boot_iso($img, 1);
-    } elsif ($img =~ /drivers/) {
-	drivers($type, $I, "$img-$_") foreach @kernels;
-	rename("$img-$main", $img);
-    } elsif ($extension eq 'rdz') {
-	initrd($tmp_mnt_initrd, $type, $I, "$img-$_") foreach @kernels;
-    } elsif ($extension eq 'img') {
-	print STDERR "calling boot_img_$arch for $img\n";
-	$::{"boot_img_$arch"}->($tmp_mnt, $type, $I, "$img-$_", glob("kernel/all.kernels/$_/boot/vmlinu*")) foreach @kernels;
-	rename("$img-$main", $img);
-    } else {
-	die "unknown image $img";
-    }
-}
-
-sub syslinux_color {
-    "0" . {
-	default => '7',
-	blue    => '9',
-	green   => 'a',
-	red     => 'c',
-	yellow  => 'e',
-	white   => 'f',
-    }->{$_[0]} || die "unknown color $_[0]\n";
-}
-
-sub syslinux_msg { 
-    my ($msg_xml_file, @more_text) = @_;
-
-    require XML::Parser;
-
-    sub xml_tree2syslinux {
-	my ($current_color, $tree) = @_;
-	my (undef, @l) = @$tree;
-	join('', map {
-	    my ($type, $val) = @$_;
-	    if ($type eq '0') {
-		$val;
-	    } else {
-		syslinux_color($type) . xml_tree2syslinux($type, $val) . syslinux_color($current_color);
-	    }
-	} group_by2(@l));
-    };
-
-    print "parsing $msg_xml_file\n";
-    my $tree = XML::Parser->new(Style => 'Tree')->parsefile($msg_xml_file);
-    $tree->[0] eq 'document' or die "bad file $msg_xml_file\n";
-    my $text = xml_tree2syslinux('default', $tree->[1]);
-
-    pack("C*", 0x0E, 0x80, 0x03, 0x00) . ""
-      . $text . join('', @more_text)
-      . "\n" . syslinux_color('red') . "[F1-Help] [F2-Advanced Help] [F3-Main]" . syslinux_color('default') . "\n";
-}
-
-sub install_stripped { _ "strip $_[0]"; _ "$sudo install $_[0] $_[1]" }
-
-sub initrd {
-    my ($mnt, $type, $I, $img, $o_raw_stage1_tree_kind) = @_;
-    my $tmp = "$ENV{HOME}/tmp/initrd";
-    my $tar = "$instdir/stage1-data/stage1$o_raw_stage1_tree_kind.tar.bz2";
-
-    __ "$sudo umount $tmp $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$tmp bs=1k count=" . ($arch =~ /ia64/ ? ($type eq "all" ? 16386 : 16384) : ($type eq "all" ? 5000 : 2000));
-    mke2fs($tmp);
-    _ "$sudo mount -t ext2 $tmp $mnt -o loop";
-
-    _ "$sudo tar xjC $mnt -f $tar";
-    symlinkf "/tmp/stage2/lib64", "$mnt/lib64" if $arch =~ /x86_64/;
-
-    {
-	my $install = ${{
-	    network => "stage1-network",
-	    cdrom => "stage1-cdrom",
-	}}{$type} || 'stage1-full';
-	install_stripped("$instdir/init", "$mnt/sbin");
-	install_stripped("$instdir/$install", "$mnt/sbin/stage1");
-    }
-
-    if (member($type, qw(network all))) {
-	install_stripped("$instdir/ppp/pppd-bin", "$mnt/sbin/pppd");
-	install_stripped("$instdir/rp-pppoe/pppoe-bin", "$mnt/sbin/pppoe");
-	_ "$sudo mknod $mnt/dev/ppp c 108 0";
-	_ "$sudo mknod $mnt/dev/ptyp0 c 2 0";
-	_ "$sudo mknod $mnt/dev/ttyp0 c 3 0";
-    }
-
-    if (member($type, qw(pcmcia all network)) && $arch !~ /ppc|ia64|x86_64/) {
-	 _ "$sudo cp -a /etc/pcmcia $mnt/etc";
-	 _ "cp $mnt/etc/pcmcia/config /tmp/pcmcia_config_tmp";
-	 _ "tools/patch_pcmcia_config.pl /tmp/pcmcia_config_tmp kernel/all.modules/$main/modules.dep";
-	 _ "sudo mv /tmp/pcmcia_config_tmp $mnt/etc/pcmcia/config";
-    }
-    my ($ext) = $img =~ /rdz-(.*)/ or die "bad initrd name ($img)";
-    my $modz = "kernel/all.modules$I/$ext";
-    _ "$sudo cp -f $modz/${type}_modules.mar $mnt/modules/modules$I.mar";
-    _ "$sudo cp -f $modz/modules.dep $mnt/modules/";
-    _ "$sudo cp -f /sbin/sash $mnt/tmp/sh" if $ENV{DEBUGSTAGE1};
-    _ "$sudo umount $mnt";
-
-# Workaround for vfat-loop bug (quite touchy)
-    _ "gzip -9f $tmp";
-    _ "cp -f $tmp.gz $img";
-    _ "rm -f $tmp.gz";
-#    _ "gzip -9 -c $tmp > $img";
-#    _ "rm -f $tmp";
-}
-
-sub entries_append {
-    my ($type) = @_;
-
-    my $automatic = $type =~ /cdrom/ ? 'automatic=method:cdrom' : '';
-    $automatic .= " changedisk" if $type =~ /changedisk/;
-
-    my @simple_entries = (
-	linux => $default_vga,
-	vgalo => "vga=785",
-	vgahi => "vga=791",
-	vga16 => "vga16",
-	text => "text",
-	patch => "patch $default_vga",
-	expert => "expert $default_vga",
-	rescue => "rescue rw",
-    );
-    my @entries = (
-        (map { $_->[0] => "$automatic $default_acpi $_->[1]" } group_by2(@simple_entries)),
-	acpi => "$automatic $default_vga",
-	if_(member($type, "cdrom", "all"), oem => "automatic=method:cdrom $default_vga $default_acpi rescue oem rw",),
-        if_($type eq "all", all => "pcmcia $default_vga $default_acpi"),
-    );
-
-    map { [ $_->[0], "$default_append $_->[1]" ] }
-      group_by2(@entries);
-}
-
-sub boot_img_i386 {
-    my ($mnt, $type, $I, $img, $kernel) = @_;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-
-    _ "dd if=/dev/zero of=$img bs=1k count=" . ($type eq 'all' ? 2880 : 1440);
-    _ "mkdosfs -f 1 -r 16 -s 2 $img"; # keep the FAT bookkeeping as small as possible
-    _ "$sudo syslinux-graphic $img";
-
-    _ "$sudo mount -t vfat -o umask=0 $img $mnt -o loop";
-    _ "cat $kernel > $mnt/vmlinuz";
-    bmp_to_msg('isolinux-graphic-simple.bmp', "$mnt/boot.msg", '397,190,14,6', 27, 27);
-
-    output("$mnt/help.msg", syslinux_msg('help.msg.xml'));
-    output("$mnt/advanced.msg", syslinux_msg('advanced.msg.xml'));
-
-    (my $rdz = $img) =~ s/\.img/.rdz/;
-    (my $initrd_type = $type) =~ s/-changedisk//;
-    initrd($tmp_mnt_initrd, $initrd_type, $I, $rdz);
-    my $short_type = substr($type, 0, 8);
-
-    my $timeout = 72;
-    output "$mnt/syslinux.cfg",
-"default linux
-prompt 1
-timeout $timeout
-display boot.msg
-F1 help.msg
-F2 advanced.msg
-F3 boot.msg
-" . join('', map {
-"label $_->[0]
-  kernel vmlinuz
-  append initrd=$short_type.rdz $_->[1]
-" } entries_append($type));
-
-    eval { _ "cp -f $rdz $mnt/$short_type.rdz" };
-    if ($@) {
-	unlink "$mnt/$short_type.rdz";
-	my $avail = (split ' ', `df $mnt`)[-3];
-	my $s = int((-s $rdz) / 1024);
-
-	my ($ext) = $img =~ /\.img-(.*)/ or die "bad initrd name ($img)";
-	my $dir = "kernel/all.modules/$ext";
-	my $pcitable = cat_('/usr/share/ldetect-lst/pcitable');
-	my @l = sort { $a <=> $b } map {
-	    my ($name) = /(\S+)\.k?o$/ or die "bad file in .mar";
-	    my $gz_size = chomp_(`gzip -c $dir/$_ | wc -c`);
-	    sprintf "%7d  %6d      %s\n", $gz_size, listlength($pcitable =~ /"$name"/g), $name;
-	} split(' ', `mdk-stage1/mar/mar -l $dir/${initrd_type}_modules.mar`);
-	output('.not-enough-room', "gz size - pcitable - name\n", @l);
-
-	warn sprintf("not enough room for $rdz: need %dKB (available %dKB < needed %dKB)\n", $s - $avail, $avail, $s);
-	die qq(check file ".not-enough-room" to see modules size and pcitable usage\n);
-    }
-    unlink $rdz;
-
-    _ "sync";
-    _ "df $mnt";
-    _ "$sudo umount $mnt";
-}
-
-# alias to x86 variant, slightly bigger with images though
-sub boot_img_x86_64 { &boot_img_i386 }
-
-sub boot_img_alpha {
-    my ($mnt, $type, $I, $img) = @_;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=1440";
-    mke2fs($img);
-    _ "/sbin/e2writeboot $img /boot/bootlx";
-    _ "$sudo mount -t ext2 $img $mnt -o loop";
-    _ "cp -f vmlinux.gz $mnt";
-    -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd($tmp_mnt_initrd, $type, $I, "$mnt/$type.rdz");
-
-    mkdir "$mnt/etc", 0777;
-    output("$mnt/etc/aboot.conf", 
-"0:vmlinux.gz initrd=$type.rdz rw $default_append $type
-1:vmlinux.gz initrd=$type.rdz rw $default_append text $type
-");
-    _ "sync";
-    _ "df $mnt";
-}
-
-sub boot_img_ia64 {
-    my ($mnt, $type, $_I, $img, $kernel) = @_;
-	my $rdz = $img; $rdz =~ s/\.img/.rdz/;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=16384";
-    _ "mkdosfs $img";
-    _ "$sudo mount -t vfat $img $mnt -o loop,umask=000";
-    _ "$sudo cp -f $kernel $mnt/vmlinux";
-    _ "cp -f $rdz $mnt/$type.rdz";
-    _ "$sudo cp -f tools/ia64/elilo.efi $mnt";
-	output("$mnt/elilo.conf", qq(
-prompt
-timeout=50
-
-image=vmlinux
-        label=linux
-        root=/dev/ram3
-        initrd=$type.rdz
-        append=" ramdisk_size=120000"
-        read-only
-
-image=vmlinux
-        label=rescue
-        root=/dev/ram3
-        initrd=$type.rdz
-        append=" rescue ramdisk_size=120000"
-"));
-    _ "sync";
-    _ "df $mnt";
-
-}
-
-sub boot_img_sparc {
-    my ($mnt, $type, $I, $_img) = @_;
-    if ($type =~ /^live(.*)/) {
-	#- hack to produce directly into /export the needed file for cdrom boot.
-	my $dir = "/export";
-	my $boot = "boot"; #- non-absolute pathname only!
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f /boot/cd.b /boot/second.b $dir/$boot";
-	_ "cp -f vmlinux$1 $dir/$boot/vmlinux$1";
-	-f "live$1.rdz" ? _ "cp -f live$1.rdz $dir/$boot" : initrd($tmp_mnt_initrd, $type, $I, "$dir/$boot/live$1.rdz");
-
-	output("$dir/$boot/silo.conf", qq(
-partition=1
-default=linux
-timeout=100
-read-write
-message=/$boot/boot.msg
-image="cat /$boot/boot.msg"
-  label=1
-  single-key
-image="cat /$boot/general.msg"
-  label=2
-  single-key
-image="cat /$boot/expert.msg"
-  label=3
-  single-key
-image="cat /$boot/rescue.msg"
-  label=4
-  single-key
-image="cat /$boot/kickit.msg"
-  label=5
-  single-key
-image="cat /$boot/param.msg"
-  label=6
-  single-key
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=linux
-  alias=install
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 root=/dev/ram3"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=text
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 text root=/dev/ram3"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=expert
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 expert root=/dev/ram3"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=ks
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 ks root=/dev/ram3"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=rescue
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 rescue rw root=/dev/ram3"
-image[sun4u]=/$boot/vmlinux64
-  label=linux
-  alias=install
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 root=/dev/ram3"
-image[sun4u]=/$boot/vmlinux64
-  label=text
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 text root=/dev/ram3"
-image[sun4u]=/$boot/vmlinux64
-  label=expert
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 expert root=/dev/ram3"
-image[sun4u]=/$boot/vmlinux64
-  label=ks
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 ks root=/dev/ram3"
-image[sun4u]=/$boot/vmlinux64
-  label=rescue
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 rescue rw root=/dev/ram3"
-"));
-
-	output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, try:
-  mkisofs -R -o t.iso -s /$boot/silo.conf /export
-");
-    } elsif ($type =~ /^tftprd(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-	my $setarch = $1 ? "sparc64" : "sparc32";
-
-	_ "mkdir -p $dir/$boot";
-	-f "$type.rdz" or initrd($tmp_mnt_initrd, $type, $I, "$type.rdz");
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-	_ "$setarch kernel$1/src/arch/sparc$1/boot/piggyback $dir/$boot/$type.img kernel$1/boot/System.map $type.rdz";
-    } elsif ($type =~ /^tftp(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-    } else {
-	my $dir = "floppy";
-	__ "$sudo umount $mnt 2>/dev/null";
-	_ "rm -rf $dir";
-	_ "mkdir -p $dir";
-	_ "cp -f /boot/fd.b /boot/second.b $dir";
-	_ "cp -f vmlinuz$I $dir/vmlinux$I.gz";
-	-f "$type.rdz" ? _ "cp -f $type.rdz $dir" : initrd($tmp_mnt_initrd, $type, $I, "$dir/$type.rdz");
-
-	output("$dir/boot.msg", "
-Welcome to Mandrake Linux 7.1
-
-Press <Enter> to install or upgrade a system 7mMandrake Linux7m
-");
-
-	output("$dir/silo.conf", qq(
-partition=1
-default=linux
-timeout=100
-read-write
-message=/boot.msg
-image=/vmlinux$I.gz
-  label=linux
-  initrd=/$type.rdz
-  append="ramdisk_size=128000 $type root=/dev/ram3"
-"));
-	_ "genromfs -d $dir -f /dev/ram -A 2048,/.. -a 512 -V 'DrakX boot disk'";
-	_ "$sudo mount -t romfs /dev/ram $mnt";
-	_ "silo -r $mnt -F -i /fd.b -b /second.b -C /silo.conf";
-	_ "$sudo umount $mnt";
-	_ "dd if=/dev/ram of=$type.img bs=1440k count=1";
-	_ "sync";
-	_ "$sudo mount -t romfs /dev/ram $mnt";
-	_ "df $mnt";
-    }
-}
-
-sub boot_img_ppc() {
-	#- hack to produce directly into /export the needed file for cdrom boot.
-	my $dir = "/export";
-	my $boot = "boot"; #- non-absolute pathname only!
-    _ "rm -rf $dir/$boot"; mkdir "$dir/$boot", 0777;
-	foreach (glob("kernel/all.kernels/*")) {
-		my $ext = basename($_);
-		if ($ext =~ /2.4/) {
-			_ "cp $_/boot/vmlinux $dir/$boot/vmlinux";
-			_ "cp images/all.rdz-$ext $dir/$boot/all.gz";
-		}
-		if ($ext =~ /2.2/) {
-			_ "cp $_/boot/vmlinux $dir/$boot/vmlinux-2.2";
-			_ "cp images/all.rdz-$ext $dir/$boot/all-2.2.gz";
-		}
-    }
-    _ "cp -f /usr/lib/yaboot/yaboot $dir/$boot/yaboot";
-	
-	output("$dir/$boot/ofboot.b", '<CHRP-BOOT>
-<COMPATIBLE>
-MacRISC
-</COMPATIBLE>
-<DESCRIPTION>
-Mandrake Linux PPC bootloader
-</DESCRIPTION>
-<BOOT-SCRIPT>
-" screen" output
-dev screen
-" "(0000000000aa00aa0000aaaaaa0000aa00aaaa5500aaaaaa)" drop 0 8 set-colors
-" "(5555555555ff55ff5555ffffff5555ff55ffffff55ffffff)" drop 8 8 set-colors
-device-end
-3 to foreground-color
-0 to background-color
-" "(0C)" fb8-write drop
-" Booting Mandrake Linux PPC..." fb8-write drop 100 ms
-boot cd:2,\\\\yaboot
-</BOOT-SCRIPT>
-<OS-BADGE-ICONS>
-1010
-000000000000F8FEACF6000000000000
-0000000000F5FFFFFEFEF50000000000
-00000000002BFAFEFAFCF70000000000
-0000000000F65D5857812B0000000000
-0000000000F5350B2F88560000000000
-0000000000F6335708F8FE0000000000
-00000000005600F600F5FD8100000000
-00000000F9F8000000F5FAFFF8000000
-000000008100F5F50000F6FEFE000000
-000000F8F700F500F50000FCFFF70000
-00000088F70000F50000F5FCFF2B0000
-0000002F582A00F5000008ADE02C0000
-00090B0A35A62B0000002D3B350A0000
-000A0A0B0B3BF60000505E0B0A0B0A00
-002E350B0B2F87FAFCF45F0B2E090000
-00000007335FF82BF72B575907000000
-000000000000ACFFFF81000000000000
-000000000081FFFFFFFF810000000000
-0000000000FBFFFFFFFFAC0000000000
-000000000081DFDFDFFFFB0000000000
-000000000081DD5F83FFFD0000000000
-000000000081DDDF5EACFF0000000000
-0000000000FDF981F981FFFF00000000
-00000000FFACF9F9F981FFFFAC000000
-00000000FFF98181F9F981FFFF000000
-000000ACACF981F981F9F9FFFFAC0000
-000000FFACF9F981F9F981FFFFFB0000
-00000083DFFBF981F9F95EFFFFFC0000
-005F5F5FDDFFFBF9F9F983DDDD5F0000
-005F5F5F5FDD81F9F9E7DF5F5F5F5F00
-0083DD5F5F83FFFFFFFFDF5F835F0000
-000000FBDDDFACFBACFBDFDFFB000000
-000000000000FFFFFFFF000000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFFFF00000000
-00000000FFFFFFFFFFFFFFFFFF000000
-00000000FFFFFFFFFFFFFFFFFF000000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-00FFFFFFFFFFFFFFFFFFFFFFFFFF0000
-00FFFFFFFFFFFFFFFFFFFFFFFFFFFF00
-00FFFFFFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFF000000
-</OS-BADGE-ICONS>
-</CHRP-BOOT>
-');
-
-	output("$dir/$boot/yaboot.conf", '
-init-message = "\nWelcome to Mandrake Linux PPC!\nHit <TAB> for boot options.\n\n"
-timeout = 150
-default = install-gui
-message=cd:,\\\\yaboot.msg
-
-image = cd:,\\\\vmlinux
-    label = install-gui
-    root = /dev/ram3
-    initrd = cd:,\\\\all.gz
-    initrd-size = 34000
-
-image = cd:,\\\\vmlinux-2.2
-    label = install-gui-2.2
-    root = /dev/ram3
-    initrd = cd:,\\\\all-2.2.gz
-    initrd-size = 34000
-
-image = cd:,\\\\vmlinux
-    label = install-text
-    root = /dev/ram3
-    initrd = cd:,\\\\all.gz
-    initrd-size = 34000
-    append = " text video=ofonly"
-
-image = cd:,\\\\vmlinux-2.2
-    label = install-text-2.2
-    root = /dev/ram3
-    initrd = cd:,\\\\all-2.2.gz
-    initrd-size = 34000
-    append = " text video=ofonly"
-
-image = cd:,\\\\vmlinux
-    label = install-gui-old
-    root = /dev/ram3
-    initrd = cd:,\\\\all.gz
-    initrd-size = 34000
-    append = " gui-old video=ofonly"
-
-image = cd:,\\\\vmlinux-2.2
-    label = install-gui-old-2.2
-    root = /dev/ram3
-    initrd = cd:,\\\\all-2.2.gz
-    initrd-size = 34000
-    append = " gui-old video=ofonly"
-
-image = enet:0,vmlinux
-    label = install-net
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " video=ofonly"
-
-image = enet:0,vmlinux-2.2
-    label = install-net-2.2
-    root = /dev/ram3
-    initrd = enet:0,all-2.2.gz
-    initrd-size = 34000
-    append = " video=ofonly"
-	
-image = enet:0,vmlinux
-    label = install-net-text
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " text video=ofonly"
-
-image = enet:0,vmlinux-2.2
-    label = install-net-text-2.2
-    root = /dev/ram3
-    initrd = enet:0,all-2.2.gz
-    initrd-size = 34000
-    append = " text video=ofonly"
-	
-image = cd:,\\\\vmlinux
-    label = rescue
-    root = /dev/ram3
-    initrd = cd:,\\\\all.gz
-    initrd-size = 34000
-    append = " rescue video=ofonly"    
-
-image = enet:0,vmlinux
-    label = rescue-net
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " rescue video=ofonly"    
-');
-
-	output("$dir/$boot/yaboot.msg", '
-Thanks for choosing Mandrake Linux PPC.  The following is a short
-explanation of the various options for booting the install CD.
-
-All options ending with "2.2" will use the 2.2.20-9mdkBOOT kernel.
-The default syntax with no suffix uses the 2.4.18-4mdkBOOT kernel.
-The default if you just hit enter is "install-gui".
-
-install-gui:        	uses XFree86 fbdev mode
-install-text:       	text based install
-install-gui-old:    	old Xpmac gui
-install-net:            allows you to use a minimal boot CD,
-                        pulling the rest of the install from
-                        a network server
-install-net-text:       text mode network install
-rescue:                 boots the rescue image
-rescue-net:             boots the rescue image from a network server
-
-');
-
-}
-
-sub bmp_to_msg {
-    my ($bmp, $msg, $progress_place, $progress_color, $clear_color) = @_;
-    #- change here for newer picture isolinux-graphic.bmp and newer parameters.
-    #- for old style pictures (9.1 and previous)
-    # lilo-bmp2mdk mode:0x103 progress:425,173,16,7,64+21 clear:600,800,64+59 pos:0,0 <isolinux-graphic.bmp >isolinux/boot.msg
-    #- for current 9.2 pictures.
-    -e $bmp and _ "lilo-bmp2mdk mode:0x103 progress:$progress_place,64+$progress_color clear:600,800,64+$clear_color pos:0,0 <$bmp >$msg"
-}
-
-sub isolinux {
-    my ($main, @kernels) = @_;
-    @kernels = ($main, grep { $_ ne $main } @kernels);
-    _ "rm -rf isolinux"; mkdir "isolinux", 0777;
-
-    each_index {
-	mkdir "isolinux/alt$::i", 0777;
-	my ($kernel) = glob("kernel/all.kernels/$_/boot/vmlinu*");
-	_ "cp $kernel isolinux/alt$::i/vmlinuz";
-	initrd($tmp_mnt_initrd, 'all', '', "images/all.rdz-$_");
-	_ "mv images/all.rdz-$_ isolinux/alt$::i/all.rdz";
-    } @kernels;
-
-    bmp_to_msg('isolinux-graphic.bmp', 'isolinux/boot.msg', '397,190,14,6', 18, 18);
-
-    _ "cp /usr/lib/syslinux/isolinux.bin isolinux/isolinux.bin";
-    _ "install -m 644 -D /boot/memtest* isolinux/test/memtest.bin";
-    output "isolinux/isolinux.cfg", "
-default linux
-prompt 1
-timeout 150
-display boot.msg
-F1 help.msg
-F2 advanced.msg
-F3 boot.msg
-" . join('', map {
-"label $_->[0]
-  kernel alt0/vmlinuz
-  append initrd=alt0/all.rdz $_->[1] automatic=method:cdrom
-" } entries_append('all'))
-  . join('', map_index {
-"label alt$::i
-  kernel alt$::i/vmlinuz
-  append initrd=alt$::i/all.rdz $default_append $default_acpi $default_vga
-" } @kernels) .
-"label memtest
-  kernel test/memtest.bin
-";
-
-    output("isolinux/help.msg", syslinux_msg('help.msg.xml'));
-    output("isolinux/advanced.msg", syslinux_msg('advanced.msg.xml', 
-						 "\nYou can choose the following kernels :\n",
-						 map_index { " o  " . syslinux_color('white') . "alt$::i" . syslinux_color('default') . " is kernel $_\n" } @kernels));
-}
-
-sub isolinux_move {   
-    my ($main) = @_;
-
-    my ($kernel) = glob("kernel/all.kernels/$main/boot/vmlinu*");
-    _ "cp $kernel move/isolinux/vmlinuz";
-    initrd($tmp_mnt_initrd, 'all', '', "move/isolinux/all.rdz-$main", '-with-busybox');
-    rename "move/isolinux/all.rdz-$main", "move/isolinux/all.rdz";
-
-    bmp_to_msg('move/data/isolinux-graphic.bmp', 'move/isolinux/boot.msg', '371,144,4,4', 11, 127);
-    _ "cp /usr/lib/syslinux/isolinux.bin isolinux/isolinux.bin";
-}
-
-sub hd_grub {
-    my ($mnt, $img) = @_;
-    my $mapfile = '/tmp/device.map.tmp';
-
-    my @grub_files = map { "/boot/grub/$_" } qw(stage1 stage2);
-    my $size = 40_000 + sum(map { -s $_ } @grub_files);
-
-    __ "$sudo umount $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1 count=$size";
-    _ "mkdosfs $img";
-    _ "$sudo mount -t vfat -o umask=0 $img $mnt -o loop";
-    _ "cp @grub_files $mnt";
-
-    output("$mnt/menu.lst", <<EOF);
-timeout 0
-default 0
-fallback 1
-
-title Mandrake Install
-
-root (hd0,0)
-kernel /cooker/isolinux/alt0/vmlinuz $default_append $default_acpi $default_vga automatic=method:disk
-initrd /cooker/isolinux/alt0/all.rdz
-
-title Help
-
-pause To display the help, press <space> until you reach "HELP END"
-pause .
-pause Please see http://qa.mandrakesoft.com/hd_grub.cgi for a friendlier solution
-pause .
-pause To specify the location where Mandrake Linux is copied,
-pause choose "Mandrake Install", and press "e".
-pause Then change "root (hd0,0)". FYI:
-pause - (hd0,0) is the first partition on first bios hard drive (usually hda1)
-pause - (hd0,4) is the first extended partition (usually hda5)
-pause - (hd1,0) is the first partition on second bios hard drive
-pause Replace /cooker to suits the directory containing Mandrake Linux
-pause .
-pause HELP END
-EOF
-
-    _ "$sudo umount $mnt";
-
-    output($mapfile, "(fd0) $img\n");
-
-    open(my $G, "| grub --device-map=$mapfile --batch");
-    print $G <<EOF;
-root (fd0)
-install /stage1 d (fd0) /stage2 p /menu.lst
-quit
-EOF
-    close $G;
-    unlink $mapfile;
-}
-
-sub boot_iso {
-    my ($iso, $bootcdrom) = @_;
-
-    my $cfg = cat_('isolinux/isolinux.cfg') or die 'isolinux missing';
-    if ($bootcdrom) {
-	$cfg =~ s/(automatic=method:\w+)/changedisk $1/gm;
-    } else {
-	$cfg =~ s/(automatic=method:\w+)//gm;
-    }
-
-    eval { rm_rf('.boot_iso') };
-    mkdir_p('.boot_iso/isolinux');
-    _ "cd .boot_iso/isolinux ; ln -s ../../isolinux/* .";
-   
-    my $cfg_file = '.boot_iso/isolinux/isolinux.cfg';
-    unlink $cfg_file;
-    output($cfg_file, $cfg);
-
-    _ "mkisofs -r -f -J -cache-inodes -V 'Mdk Boot ISO' -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o $iso .boot_iso";
-    rm_rf('.boot_iso');
-}
-
-sub drivers {
-    my ($type, $I, $img) = @_;
-
-    _ "dd if=/dev/zero of=$img bs=1k count=1440";
-    mke2fs($img);
-    _ "$sudo mount -t ext2 $img $tmp_mnt -o loop";
-
-    my ($ext) = $img =~ /img-(.*)/ or die "bad image name ($img)";
-    _ "$sudo cp -f kernel/all.modules$I/$ext/${type}_modules.mar $tmp_mnt/modules$I.mar";
-
-    _ "sync";
-    _ "df $tmp_mnt";
-
-    _ "$sudo umount $tmp_mnt";
-}
diff --git a/mdk-stage1/.cvsignore b/mdk-stage1/.cvsignore
deleted file mode 100644
index 46b9c94a0..000000000
--- a/mdk-stage1/.cvsignore
+++ /dev/null
@@ -1,14 +0,0 @@
-init
-init-stage2
-stage1-full
-stage1-cdrom
-stage1-disk
-stage1-medias-usb
-stage1-network
-stage1-network-usb
-debug.log
-.depend
-*.rdz*
-mkinitrd_helper.tar.bz2
-hack_*
-rescue-gui
diff --git a/mdk-stage1/Makefile b/mdk-stage1/Makefile
deleted file mode 100644
index b28708dab..000000000
--- a/mdk-stage1/Makefile
+++ /dev/null
@@ -1,278 +0,0 @@
- #******************************************************************************
- #
- #    mdk-stage1 - the program that will load second-stage install
- #
- # $Id$
- #
- # Pixel (pixel@mandrakesoft.com) (mostly done by Guillaume Cottenceau)
- #
- # Copyright 2000-2004 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- # Portions from Erik Troan (ewt@redhat.com) Copyright 1996 Red Hat Software 
- #
- #*****************************************************************************
- #
- # Currently:
- #
- # 	ix86
- # init with minilibc
- # stage1 with dietlibc
- #
- # 	ppc
- # init with dietlibc
- # stage1 with glibc
- #
- # 	ia64
- # init with glibc
- # stage1 with glibc
- #
- #	x86-64
- # init with minilibc
- # stage1 with dietlibc
- #
- #*****************************************************************************
-
-
-VERSION = 10.1
-
-top_dir = .
-
-include $(top_dir)/Makefile.common
-
-
-DEFS = -DVERSION=\"$(VERSION)\" -DSPAWN_SHELL $(ADDITIONAL_DEFS)
-
-COMPILE = $(CC) $(DEFS) $(CFLAGS)
-
-
- #- stage1 "loader"
-ifeq (i386, $(ARCH))
-INITSRC = minilibc.c init.c
-INIT_DEFS = -DINIT_HEADERS=\"minilibc.h\" -fno-builtin
-INIT_DEFS_ADD = -DBINARY=\"/sbin/stage1\"
-ifdef MOVE
-INIT_DEFS_ADD_STAGE2 = -DBINARY=\"/usr/bin/runstage2.pl\"
-else
-INIT_DEFS_ADD_STAGE2 = -DBINARY=\"/usr/bin/runinstall2\"
-endif
-else
-ifeq (x86_64, $(ARCH))
-INITSRC = minilibc.c init.c
-INIT_DEFS = -DINIT_HEADERS=\"minilibc.h\" -fno-builtin
-else
-INITSRC = init.c
-ifeq (ia64, $(ARCH))
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(GLIBC_INCLUDES)
-else
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(DIETLIBC_INCLUDES)
-endif
-endif
-endif
-
-INITOBJS = $(subst .c,.o,$(INITSRC))
-INITOBJS-STAGE2 = $(subst .c,-STAGE2.o,$(INITSRC))
-
-
- #- frontends
-NEWT_FRONTEND_SRC = newt-frontend.c
-NEWT_FRONTEND_LIBS = newt/libnewt.a slang/libslang.a
-
-STDIO_FRONTEND_SRC = stdio-frontend.c
-STDIO_FRONTEND_LIBS =
-STDIO_FRONTEND_LIBS =
-
-
-FRONTEND_OBJS = $(subst .c,.o,$($(F)_FRONTEND_SRC))
-
-FRONTEND_LINK = $(FRONTEND_OBJS) $($(F)_FRONTEND_LIBS)
-
-INSMOD = insmod-modutils
-ifeq (i386, $(ARCH))
-INSMOD = insmod-busybox
-endif
-ifeq (x86_64, $(ARCH))
-INSMOD = insmod-busybox
-endif
-
-STAGE1_OWN_LIBS = $(INSMOD)/libinsmod.a mar/libmar.a bzlib/libbzlib.a
-
-
-ifeq (DIETLIBC, $(L))
-STAGE1_NETWORK_LIBS = $(top_dir)/dietlibc/bin-$(ARCH)/librpc.a
-endif
-
-ifeq (GLIBC, $(L))
-ifeq (x86_64, $(ARCH))
-STAGE1_NETWORK_LIBS = /usr/lib64/libresolv.a
-else
-STAGE1_NETWORK_LIBS = /usr/lib/libresolv.a
-endif
-endif
-
-ifdef MOVE
-MOVE_ADDSRC = lomount.c
-else
-MOVE_ADDSRC =
-endif
-
- #- stage1 itself
-STAGE1SRC = stage1.c log.c tools.c modules.c probing.c mount.c automatic.c frontend-common.c
-CDROMSRC = cdrom.c $(MOVE_ADDSRC)
-DISKSRC = disk.c lomount.c
-NETWORKSRC = network.c nfsmount.c dhcp.c url.c dns.c adsl.c $(MOVE_ADDSRC)
-
-ALLSRC = $(INITSRC) $(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC)
-
-
-
-STAGE1OBJS-CDROM = $(subst .c,-CDROM.o,$(STAGE1SRC) $(CDROMSRC))
-
-CDROM_DEFS = -DDISABLE_DISK -DDISABLE_NETWORK
-
-
-STAGE1OBJS-NETWORK = $(subst .c,-NETWORK.o,$(STAGE1SRC) $(NETWORKSRC))
-
-NETWORK_DEFS = -DDISABLE_CDROM -DDISABLE_DISK
-
-
-STAGE1OBJS-FULL = $(subst .c,-FULL.o,$(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-
-
-ifeq (i386, $(ARCH))
-LDFLAGS_INIT = -static -nostdlib /usr/lib/crt1.o
-else
-ifeq (x86_64, $(ARCH))
-LDFLAGS_INIT = -static -nostdlib /usr/lib64/crt1.o
-INIT_LIBC = $(GLIBC_LIBC)
-else
-ifeq (ia64, $(ARCH))
-LDFLAGS_INIT = $(GLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(GLIBC_LIBC)
-else
-LDFLAGS_INIT = $(DIETLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(DIETLIBC_LIBC)
-endif
-endif
-endif
-
-
-BINS = init init-stage2 stage1-full
-
-ifeq (i386, $(ARCH))
-BINS += stage1-cdrom stage1-network
-endif
-ifeq (x86_64, $(ARCH))
-BINS += stage1-cdrom stage1-network
-endif
-
-ifeq (i386, $(ARCH))
-DIRS = dietlibc
-endif
-ifeq (ppc, $(ARCH))
-DIRS = dietlibc
-endif
-ifeq (x86_64, $(ARCH))
-DIRS = dietlibc
-endif
-DIRS += mar pci-resource usb-resource bzlib $(INSMOD) slang newt ppp/pppd rp-pppoe/src
-ifeq (i386, $(ARCH))
-DIRS += pcmcia_
-endif
-
-
-ifeq (i386,$(ARCH))
-PCMCIA_LIB = pcmcia_/libpcmcia.a
-PCMCIA_DEFS = -DENABLE_PCMCIA
-endif
-
-USB_DEFS_GEN = -DENABLE_USB
-USB_DEFS = -DENABLE_USB -DDISABLE_PCIADAPTERS
-
-all: dirs $(BINS)
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n || exit 1 ;\
-	done
-
-init: $(INITOBJS) $(INIT_LIBC)
-	$(CC) $(LDFLAGS_INIT) -o $@ $^
-	$(STRIPCMD) $@
-
-init-stage2: $(INITOBJS-STAGE2) $(INIT_LIBC)
-	$(CC) $(LDFLAGS_INIT) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-cdrom: $(STAGE1OBJS-CDROM) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-network: $(STAGE1OBJS-NETWORK) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-full: $(STAGE1OBJS-FULL) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-
-$(INITOBJS): %.o: %.c
-	$(COMPILE) $(INIT_DEFS) $(INIT_DEFS_ADD) -c $<
-
-$(INITOBJS-STAGE2): %-STAGE2.o: %.c
-	$(COMPILE) $(INIT_DEFS) $(INIT_DEFS_ADD_STAGE2) -c $< -o $@
-
-$(STAGE1OBJS-CDROM): %-CDROM.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(CDROM_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-NETWORK): %-NETWORK.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(NETWORK_DEFS) $(PCMCIA_DEFS) $(USB_DEFS_GEN) -c $< -o $@
-
-$(STAGE1OBJS-FULL): %-FULL.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(USB_DEFS_GEN) $(PCMCIA_DEFS) -c $< -o $@
-
-.c.o:
-	$(DIET) $(COMPILE) $(INCLUDES) -c $<
-
-
-clean: 
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
-	rm -f *.o .depend *.rdz *.img rescue-gui init-move $(BINS)
-
-
-tar-mkinitrd_helper: clean
-	rm -rf mkinitrd_helper-subdir
-	mkdir mkinitrd_helper-subdir
-	cd mkinitrd_helper-subdir ; cp -a ../dietlibc ../insmod-busybox ../Makefile.common ../insmod.h ../log.h . ; \
-	    cp ../Makefile.mkinitrd_helper Makefile
-	tar cfj mkinitrd_helper.tar.bz2 mkinitrd_helper-subdir --exclude CVS
-	rm -rf mkinitrd_helper-subdir
-
-rescue-gui: rescue-gui.o frontend-common.o $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-
-.depend:
-	$(CPP) $(CFLAGS) -M $(ALLSRC) > .depend
-
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-
-*-CDROM.o: %-CDROM.o: %.o
-
-*-NETWORK.o: %-NETWORK.o: %.o
-
-*-FULL.o: %-FULL.o: %.o
-
diff --git a/mdk-stage1/Makefile.common b/mdk-stage1/Makefile.common
deleted file mode 100644
index 86e29aa02..000000000
--- a/mdk-stage1/Makefile.common
+++ /dev/null
@@ -1,64 +0,0 @@
- # -*- makefile -*-
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
- #- default lib is dietlibc (honoured by main Makefile whenever possible)
-L = DIETLIBC
-#L = GLIBC
-
- #- default frontend is newt (honoured by main Makefile whenever possible)
-F = NEWT
-# F = STDIO
-
- #- override in some situations
-ifeq (ia64, $(ARCH))
-L = GLIBC
-endif
-ifeq (ppc, $(ARCH))
-L = GLIBC
-endif
-ifeq (x86_64, $(ARCH))
-#L = GLIBC
-endif
-
-ifeq (DIETLIBC, $(L))
-DIET = $(top_dir)/dietlibc/bin-$(ARCH)/diet
-endif
-
-
- #- flags used by all stuff
-ifeq (ppc, $(ARCH))
-CFLAGS = -Os -pipe -Wall -fomit-frame-pointer -fno-strict-aliasing
-else
-CFLAGS = -Os -pipe -Wall -Werror -fomit-frame-pointer -fno-strict-aliasing
-endif
-
-DIETLIBC_INCLUDES = -I$(top_dir)/dietlibc/include -I. -I$(top_dir)/bzlib
-GLIBC_INCLUDES = -I. -I$(top_dir)/bzlib
-INCLUDES = $($(L)_INCLUDES)
-
-GLIBC_LDFLAGS_STAGE1 = -static
-DIETLIBC_LDFLAGS_STAGE1 = -nostdlib
-LDFLAGS_STAGE1 = $($(L)_LDFLAGS_STAGE1)
-
-GLIBC_LIBC =
-DIETLIBC_LIBC = 
-STAGE1_LIBC = $($(L)_LIBC)
-
-STRIPCMD = strip -R .note -R .comment
-
diff --git a/mdk-stage1/Makefile.mkinitrd_helper b/mdk-stage1/Makefile.mkinitrd_helper
deleted file mode 100644
index 72bef595f..000000000
--- a/mdk-stage1/Makefile.mkinitrd_helper
+++ /dev/null
@@ -1,30 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-DIRS = dietlibc insmod-busybox
-
-
-all: dirs
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n ;\
-	done
-
-clean: 
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
diff --git a/mdk-stage1/adsl.c b/mdk-stage1/adsl.c
deleted file mode 100644
index bdbd06872..000000000
--- a/mdk-stage1/adsl.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <resolv.h>
-#include <signal.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "modules.h"
-#include "tools.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "adsl.h"
-
-
-static enum return_type adsl_connect(char * net_device, char * username, char * password)
-{
-	char pppoe_call[500];
-	char * pppd_launch[] = { "/sbin/pppd", "pty", pppoe_call, "noipdefault", "noauth", "default-asyncmap", "defaultroute",
-				 "hide-password", "nodetach", "usepeerdns", "local", "mtu", "1492", "mru", "1492", "noaccomp",
-				 "noccp", "nobsdcomp", "nodeflate", "nopcomp", "novj", "novjccomp", "user", username,
-				 "password", password, "lcp-echo-interval", "20", "lcp-echo-failure", "3", "lock", "persist", NULL };
-	int fd;
-	int retries = 10;
-	char * tty_adsl = "/dev/tty6";
-	enum return_type status = RETURN_ERROR;
-	pid_t ppp_pid;
-
-	snprintf(pppoe_call, sizeof(pppoe_call), "/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I %s -T 80 -U -m 1412", net_device);
-
-
-	fd = open(tty_adsl, O_RDWR);
-	if (fd == -1) {
-		log_message("cannot open tty -- no pppd");
-		return RETURN_ERROR;
-	}
-	else if (access(pppd_launch[0], X_OK)) {
-		log_message("cannot open pppd - %s doesn't exist", pppd_launch[0]);
-		return RETURN_ERROR;
-	}
-
-	if (!(ppp_pid = fork())) {
-		dup2(fd, 0);
-		dup2(fd, 1);
-		dup2(fd, 2);
-		
-		close(fd);
-		setsid();
-		if (ioctl(0, TIOCSCTTY, NULL))
-			log_perror("could not set new controlling tty");
-		
-		printf("\t(exec of pppd)\n");
-		execv(pppd_launch[0], pppd_launch);
-		log_message("execve of %s failed: %s", pppd_launch[0], strerror(errno));
-		exit(-1);
-	}
-	close(fd);
-	while (retries > 0 && kill(ppp_pid, 0) == 0) {
-		FILE * f;
-		if ((f = fopen("/var/run/pppd.tdb", "rb"))) {
-			while (1) {
-				char buf[500];
-				if (!fgets(buf, sizeof(buf), f))
-					break;
-				if (strstr(buf, "IPLOCAL="))
-					status = RETURN_OK;
-			}
-			fclose(f);
-			if (status == RETURN_OK) {
-				log_message("PPP: connected!");
-				break;
-			}
-		}
-		retries--;
-		log_message("PPP: <sleep>");
-		sleep(2);
-	}
-
-	if (status != RETURN_OK) {
-		log_message("PPP: could not connect");
-		kill(ppp_pid, SIGTERM);
-		sleep(1);
-		kill(ppp_pid, SIGKILL);
-		sleep(1);
-	}
-	return status;
-}
-
-
-enum return_type perform_adsl(struct interface_info * intf)
-{
-	struct in_addr addr;
-	char * questions[] = { "Username", "Password", NULL };
-	char * questions_auto[] = { "adsluser", "adslpass", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-
-	inet_aton("10.0.0.10", &addr);
-	memcpy(&intf->ip, &addr, sizeof(addr));
-
-	inet_aton("255.255.255.0", &addr);
-	memcpy(&intf->netmask, &addr, sizeof(addr));
-
-	*((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
-					    *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
-	intf->is_ptp = 0;
-
-	if (configure_net_device(intf)) {
-		stg1_error_message("Could not configure..");
-		return RETURN_ERROR;
-	}
-
-	results = ask_from_entries_auto("Please enter the username and password for your ADSL account.\n"
-					"(Warning! only PPPoE protocol is supported)",
-					questions, &answers, 40, questions_auto, NULL);
-	if (results != RETURN_OK)
-		return results;
-
-	intf->boot_proto = BOOTPROTO_ADSL_PPPOE;
-
-	wait_message("Waiting for ADSL connection to show up...");
-	my_insmod("ppp_generic", ANY_DRIVER_TYPE, NULL, 1);
-	my_insmod("ppp_async", ANY_DRIVER_TYPE, NULL, 1);
-	my_insmod("ppp", ANY_DRIVER_TYPE, NULL, 1);
-	results = adsl_connect(intf->device, answers[0], answers[1]);
-	remove_wait_message();
-
-	if (results != RETURN_OK) {
-		wait_message("Retrying the ADSL connection...");
-		results = adsl_connect(intf->device, answers[0], answers[1]);
-		remove_wait_message();
-	} else {
-		intf->user = strdup(answers[0]);
-		intf->pass = strdup(answers[1]);
-	}
-
-	if (results != RETURN_OK) {
-		stg1_error_message("I could not connect to the ADSL network.");
-		return perform_adsl(intf);
-	}
-
-	sleep(1);
-	res_init();		/* reinit the resolver, pppd modified /etc/resolv.conf */
-
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/adsl.h b/mdk-stage1/adsl.h
deleted file mode 100644
index 9d32cc631..000000000
--- a/mdk-stage1/adsl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *  Portions from GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000  Free Software Foundation, Inc.
- *
- *  Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _ADSL_H_
-#define _ADSL_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_adsl(struct interface_info * intf);
-
-#endif
diff --git a/mdk-stage1/automatic.c b/mdk-stage1/automatic.c
deleted file mode 100644
index 114d4d2cb..000000000
--- a/mdk-stage1/automatic.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (less code pollution).
- *
- */
-
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include "tools.h"
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-
-#include "automatic.h"
-
-
-static struct param_elem * automatic_params;
-static char * value_not_bound = "";
-
-void grab_automatic_params(char * line)
-{
-	int i, p;
-	struct param_elem tmp_params[50];
-
-	i = 0; p = 0;
-	while (line[i] != '\0') {
-		char *name, *value;
-		int k;
-		int j = i;
-		while (line[i] != ':' && line[i] != '\0')
-			i++;
-		name = memdup(&line[j], i-j + 1);
-		name[i-j] = 0;
-
-		k = i+1;
-		i++;
-		while (line[i] != ',' && line[i] != '\0')
-			i++;
-		value = memdup(&line[k], i-k + 1);
-		value[i-k] = 0;
-
-		tmp_params[p].name = name;
-		tmp_params[p].value = value;
-		p++;
-		if (line[i] == '\0')
-			break;
-		i++;
-	}
-
-	tmp_params[p++].name = NULL;
-	automatic_params = memdup(tmp_params, sizeof(struct param_elem) * p);
-
-	log_message("AUTOMATIC MODE: got %d params", p-1);
-}
-
-
-char * get_auto_value(char * auto_param)
-{
-	struct param_elem * ptr = automatic_params;
-
-	struct param_elem short_aliases[] =
-		{ { "method", "met" }, { "network", "netw" }, { "interface", "int" }, { "gateway", "gat" },
-		  { "netmask", "netm" }, { "adsluser", "adslu" }, { "adslpass", "adslp" }, { "hostname", "hos" },
-		  { "domain", "dom" }, { "server", "ser" }, { "directory", "dir" }, { "user", "use" },
-		  { "pass", "pas" }, { "disk", "dis" }, { "partition", "par" }, { "proxy_host", "proxh" },
-		  { "proxy_port", "proxp" }, { NULL, NULL } };
-	struct param_elem * ptr_alias = short_aliases;
-	while (ptr_alias->name) {
-		if (streq(auto_param, ptr_alias->name))
-			break;
-		ptr_alias++;
-	}
-
-	while (ptr->name) {
-		if (streq(ptr->name, auto_param)
-		    || (ptr_alias->name && streq(ptr_alias->value, ptr->name)))
-			return ptr->value;
-		ptr++;
-	}
-
-	return value_not_bound;
-}
-
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_list(msg, elems, choice);
-	else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-		return ask_from_list(msg, sav_elems, choice);
-	}
-}
-
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_list_comments(msg, elems, elems_comments, choice);
-	else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-		return ask_from_list_comments(msg, sav_elems, elems_comments, choice);
-	}
-}
-
-
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings))
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_entries(msg, questions, answers, entry_size, callback_func);
-	else {
-		char * tmp_answers[50];
-		int i = 0;
-		while (questions && *questions) {
-			tmp_answers[i] = get_auto_value(*questions_auto);
-			log_message("AUTOMATIC: question %s answers %s because of param %s", *questions, tmp_answers[i], *questions_auto);
-			i++;
-			questions++;
-			questions_auto++;
-			
-		}
-		*answers = memdup(tmp_answers, sizeof(char *) * i);
-		return RETURN_OK;
-	}
-}
diff --git a/mdk-stage1/automatic.h b/mdk-stage1/automatic.h
deleted file mode 100644
index 4b58c0ea8..000000000
--- a/mdk-stage1/automatic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (no code pollution).
- *
- */
-
-#ifndef _AUTOMATIC_H_
-#define _AUTOMATIC_H_
-
-#include "stage1.h"
-
-void grab_automatic_params(char * line);
-char * get_auto_value(char * auto_param);
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/bzlib/Makefile b/mdk-stage1/bzlib/Makefile
deleted file mode 100644
index 8e4bba791..000000000
--- a/mdk-stage1/bzlib/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libbzlib
-
-OBJS = blocksort.o bzlib.o compress.o crctable.o decompress.o huffman.o randtable.o
-
-DEFS =
-
-INCS =
-
-
-TARGETS = $(LIBNAME).a
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(DIET) $(CC) $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/bzlib/blocksort.c b/mdk-stage1/bzlib/blocksort.c
deleted file mode 100644
index c1b78c483..000000000
--- a/mdk-stage1/bzlib/blocksort.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Block sorting machinery                               ---*/
-/*---                                           blocksort.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
-
-  To get some idea how the block sorting algorithms in this file 
-  work, read my paper 
-     On the Performance of BWT Sorting Algorithms
-  in Proceedings of the IEEE Data Compression Conference 2000,
-  Snowbird, Utah, USA, 27-30 March 2000.  The main sort in this
-  file implements the algorithm called  cache  in the paper.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------*/
-/*--- Fallback O(N log(N)^2) sorting        ---*/
-/*--- algorithm, for repetitive blocks      ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static 
-__inline__
-void fallbackSimpleSort ( UInt32* fmap, 
-                          UInt32* eclass, 
-                          Int32   lo, 
-                          Int32   hi )
-{
-   Int32 i, j, tmp;
-   UInt32 ec_tmp;
-
-   if (lo == hi) return;
-
-   if (hi - lo > 3) {
-      for ( i = hi-4; i >= lo; i-- ) {
-         tmp = fmap[i];
-         ec_tmp = eclass[tmp];
-         for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
-            fmap[j-4] = fmap[j];
-         fmap[j-4] = tmp;
-      }
-   }
-
-   for ( i = hi-1; i >= lo; i-- ) {
-      tmp = fmap[i];
-      ec_tmp = eclass[tmp];
-      for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
-         fmap[j-1] = fmap[j];
-      fmap[j-1] = tmp;
-   }
-}
-
-
-/*---------------------------------------------*/
-#define fswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define fvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      fswap(fmap[yyp1], fmap[yyp2]);  \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-
-#define fmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define fpush(lz,hz) { stackLo[sp] = lz; \
-                       stackHi[sp] = hz; \
-                       sp++; }
-
-#define fpop(lz,hz) { sp--;              \
-                      lz = stackLo[sp];  \
-                      hz = stackHi[sp]; }
-
-#define FALLBACK_QSORT_SMALL_THRESH 10
-#define FALLBACK_QSORT_STACK_SIZE   100
-
-
-static
-void fallbackQSort3 ( UInt32* fmap, 
-                      UInt32* eclass,
-                      Int32   loSt, 
-                      Int32   hiSt )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m;
-   Int32 sp, lo, hi;
-   UInt32 med, r, r3;
-   Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
-   Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];
-
-   r = 0;
-
-   sp = 0;
-   fpush ( loSt, hiSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
-
-      fpop ( lo, hi );
-      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
-         fallbackSimpleSort ( fmap, eclass, lo, hi );
-         continue;
-      }
-
-      /* Random partitioning.  Median of 3 sometimes fails to
-         avoid bad cases.  Median of 9 seems to help but 
-         looks rather expensive.  This too seems to work but
-         is cheaper.  Guidance for the magic constants 
-         7621 and 32768 is taken from Sedgewick's algorithms
-         book, chapter 35.
-      */
-      r = ((r * 7621) + 1) % 32768;
-      r3 = r % 3;
-      if (r3 == 0) med = eclass[fmap[lo]]; else
-      if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
-                   med = eclass[fmap[hi]];
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (1) {
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unLo]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unLo], fmap[ltLo]); 
-               ltLo++; unLo++; 
-               continue; 
-            };
-            if (n > 0) break;
-            unLo++;
-         }
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unHi]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unHi], fmap[gtHi]); 
-               gtHi--; unHi--; 
-               continue; 
-            };
-            if (n < 0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
-
-      if (gtHi < ltLo) continue;
-
-      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
-      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      if (n - lo > hi - m) {
-         fpush ( lo, n );
-         fpush ( m, hi );
-      } else {
-         fpush ( m, hi );
-         fpush ( lo, n );
-      }
-   }
-}
-
-#undef fmin
-#undef fpush
-#undef fpop
-#undef fswap
-#undef fvswap
-#undef FALLBACK_QSORT_SMALL_THRESH
-#undef FALLBACK_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      eclass exists for [0 .. nblock-1]
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      All other areas of eclass destroyed
-      fmap [0 .. nblock-1] holds sorted order
-      bhtab [ 0 .. 2+(nblock/32) ] destroyed
-*/
-
-#define       SET_BH(zz)  bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
-#define     CLEAR_BH(zz)  bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
-#define     ISSET_BH(zz)  (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
-#define      WORD_BH(zz)  bhtab[(zz) >> 5]
-#define UNALIGNED_BH(zz)  ((zz) & 0x01f)
-
-static
-void fallbackSort ( UInt32* fmap, 
-                    UInt32* eclass, 
-                    UInt32* bhtab,
-                    Int32   nblock,
-                    Int32   verb )
-{
-   Int32 ftab[257];
-   Int32 ftabCopy[256];
-   Int32 H, i, j, k, l, r, cc, cc1;
-   Int32 nNotDone;
-   Int32 nBhtab;
-   UChar* eclass8 = (UChar*)eclass;
-
-   /*--
-      Initial 1-char radix sort to generate
-      initial fmap and initial BH bits.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        bucket sorting ...\n" );
-   for (i = 0; i < 257;    i++) ftab[i] = 0;
-   for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
-   for (i = 0; i < 256;    i++) ftabCopy[i] = ftab[i];
-   for (i = 1; i < 257;    i++) ftab[i] += ftab[i-1];
-
-   for (i = 0; i < nblock; i++) {
-      j = eclass8[i];
-      k = ftab[j] - 1;
-      ftab[j] = k;
-      fmap[k] = i;
-   }
-
-   nBhtab = 2 + (nblock / 32);
-   for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
-   for (i = 0; i < 256; i++) SET_BH(ftab[i]);
-
-   /*--
-      Inductively refine the buckets.  Kind-of an
-      "exponential radix sort" (!), inspired by the
-      Manber-Myers suffix array construction algorithm.
-   --*/
-
-   /*-- set sentinel bits for block-end detection --*/
-   for (i = 0; i < 32; i++) { 
-      SET_BH(nblock + 2*i);
-      CLEAR_BH(nblock + 2*i + 1);
-   }
-
-   /*-- the log(N) loop --*/
-   H = 1;
-   while (1) {
-
-      if (verb >= 4) 
-         VPrintf1 ( "        depth %6d has ", H );
-
-      j = 0;
-      for (i = 0; i < nblock; i++) {
-         if (ISSET_BH(i)) j = i;
-         k = fmap[i] - H; if (k < 0) k += nblock;
-         eclass[k] = j;
-      }
-
-      nNotDone = 0;
-      r = -1;
-      while (1) {
-
-	 /*-- find the next non-singleton bucket --*/
-         k = r + 1;
-         while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (ISSET_BH(k)) {
-            while (WORD_BH(k) == 0xffffffff) k += 32;
-            while (ISSET_BH(k)) k++;
-         }
-         l = k - 1;
-         if (l >= nblock) break;
-         while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (!ISSET_BH(k)) {
-            while (WORD_BH(k) == 0x00000000) k += 32;
-            while (!ISSET_BH(k)) k++;
-         }
-         r = k - 1;
-         if (r >= nblock) break;
-
-         /*-- now [l, r] bracket current bucket --*/
-         if (r > l) {
-            nNotDone += (r - l + 1);
-            fallbackQSort3 ( fmap, eclass, l, r );
-
-            /*-- scan bucket and generate header bits-- */
-            cc = -1;
-            for (i = l; i <= r; i++) {
-               cc1 = eclass[fmap[i]];
-               if (cc != cc1) { SET_BH(i); cc = cc1; };
-            }
-         }
-      }
-
-      if (verb >= 4) 
-         VPrintf1 ( "%6d unresolved strings\n", nNotDone );
-
-      H *= 2;
-      if (H > nblock || nNotDone == 0) break;
-   }
-
-   /*-- 
-      Reconstruct the original block in
-      eclass8 [0 .. nblock-1], since the
-      previous phase destroyed it.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        reconstructing block ...\n" );
-   j = 0;
-   for (i = 0; i < nblock; i++) {
-      while (ftabCopy[j] == 0) j++;
-      ftabCopy[j]--;
-      eclass8[fmap[i]] = (UChar)j;
-   }
-   AssertH ( j < 256, 1005 );
-}
-
-#undef       SET_BH
-#undef     CLEAR_BH
-#undef     ISSET_BH
-#undef      WORD_BH
-#undef UNALIGNED_BH
-
-
-/*---------------------------------------------*/
-/*--- The main, O(N^2 log(N)) sorting       ---*/
-/*--- algorithm.  Faster for "normal"       ---*/
-/*--- non-repetitive blocks.                ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static
-__inline__
-Bool mainGtU ( UInt32  i1, 
-               UInt32  i2,
-               UChar*  block, 
-               UInt16* quadrant,
-               UInt32  nblock,
-               Int32*  budget )
-{
-   Int32  k;
-   UChar  c1, c2;
-   UInt16 s1, s2;
-
-   AssertD ( i1 != i2, "mainGtU" );
-   /* 1 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 2 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 3 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 4 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 5 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 6 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 7 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 8 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 9 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 10 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 11 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 12 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-
-   k = nblock + 8;
-
-   do {
-      /* 1 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 2 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 3 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 4 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 5 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 6 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 7 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 8 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-
-      if (i1 >= nblock) i1 -= nblock;
-      if (i2 >= nblock) i2 -= nblock;
-
-      k -= 8;
-      (*budget)--;
-   }
-      while (k >= 0);
-
-   return False;
-}
-
-
-/*---------------------------------------------*/
-/*--
-   Knuth's increments seem to work better
-   than Incerpi-Sedgewick here.  Possibly
-   because the number of elems to sort is
-   usually small, typically <= 20.
---*/
-static
-Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
-                   9841, 29524, 88573, 265720,
-                   797161, 2391484 };
-
-static
-void mainSimpleSort ( UInt32* ptr,
-                      UChar*  block,
-                      UInt16* quadrant,
-                      Int32   nblock,
-                      Int32   lo, 
-                      Int32   hi, 
-                      Int32   d,
-                      Int32*  budget )
-{
-   Int32 i, j, h, bigN, hp;
-   UInt32 v;
-
-   bigN = hi - lo + 1;
-   if (bigN < 2) return;
-
-   hp = 0;
-   while (incs[hp] < bigN) hp++;
-   hp--;
-
-   for (; hp >= 0; hp--) {
-      h = incs[hp];
-
-      i = lo + h;
-      while (True) {
-
-         /*-- copy 1 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 2 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 3 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         if (*budget < 0) return;
-      }
-   }
-}
-
-
-/*---------------------------------------------*/
-/*--
-   The following is an implementation of
-   an elegant 3-way quicksort for strings,
-   described in a paper "Fast Algorithms for
-   Sorting and Searching Strings", by Robert
-   Sedgewick and Jon L. Bentley.
---*/
-
-#define mswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define mvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      mswap(ptr[yyp1], ptr[yyp2]);    \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-static 
-__inline__
-UChar mmed3 ( UChar a, UChar b, UChar c )
-{
-   UChar t;
-   if (a > b) { t = a; a = b; b = t; };
-   if (b > c) { 
-      b = c;
-      if (a > b) b = a;
-   }
-   return b;
-}
-
-#define mmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
-                          stackHi[sp] = hz; \
-                          stackD [sp] = dz; \
-                          sp++; }
-
-#define mpop(lz,hz,dz) { sp--;             \
-                         lz = stackLo[sp]; \
-                         hz = stackHi[sp]; \
-                         dz = stackD [sp]; }
-
-
-#define mnextsize(az) (nextHi[az]-nextLo[az])
-
-#define mnextswap(az,bz)                                        \
-   { Int32 tz;                                                  \
-     tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
-     tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
-     tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }
-
-
-#define MAIN_QSORT_SMALL_THRESH 20
-#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
-#define MAIN_QSORT_STACK_SIZE 100
-
-static
-void mainQSort3 ( UInt32* ptr,
-                  UChar*  block,
-                  UInt16* quadrant,
-                  Int32   nblock,
-                  Int32   loSt, 
-                  Int32   hiSt, 
-                  Int32   dSt,
-                  Int32*  budget )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m, med;
-   Int32 sp, lo, hi, d;
-
-   Int32 stackLo[MAIN_QSORT_STACK_SIZE];
-   Int32 stackHi[MAIN_QSORT_STACK_SIZE];
-   Int32 stackD [MAIN_QSORT_STACK_SIZE];
-
-   Int32 nextLo[3];
-   Int32 nextHi[3];
-   Int32 nextD [3];
-
-   sp = 0;
-   mpush ( loSt, hiSt, dSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
-
-      mpop ( lo, hi, d );
-      if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
-          d > MAIN_QSORT_DEPTH_THRESH) {
-         mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
-         if (*budget < 0) return;
-         continue;
-      }
-
-      med = (Int32) 
-            mmed3 ( block[ptr[ lo         ]+d],
-                    block[ptr[ hi         ]+d],
-                    block[ptr[ (lo+hi)>>1 ]+d] );
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (True) {
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unLo]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unLo], ptr[ltLo]); 
-               ltLo++; unLo++; continue; 
-            };
-            if (n >  0) break;
-            unLo++;
-         }
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unHi]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unHi], ptr[gtHi]); 
-               gtHi--; unHi--; continue; 
-            };
-            if (n <  0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "mainQSort3(2)" );
-
-      if (gtHi < ltLo) {
-         mpush(lo, hi, d+1 );
-         continue;
-      }
-
-      n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
-      m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      nextLo[0] = lo;  nextHi[0] = n;   nextD[0] = d;
-      nextLo[1] = m;   nextHi[1] = hi;  nextD[1] = d;
-      nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;
-
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-      if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-
-      AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
-      AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );
-
-      mpush (nextLo[0], nextHi[0], nextD[0]);
-      mpush (nextLo[1], nextHi[1], nextD[1]);
-      mpush (nextLo[2], nextHi[2], nextD[2]);
-   }
-}
-
-#undef mswap
-#undef mvswap
-#undef mpush
-#undef mpop
-#undef mmin
-#undef mnextsize
-#undef mnextswap
-#undef MAIN_QSORT_SMALL_THRESH
-#undef MAIN_QSORT_DEPTH_THRESH
-#undef MAIN_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > N_OVERSHOOT
-      block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      All other areas of block32 destroyed
-      ftab [0 .. 65536 ] destroyed
-      ptr [0 .. nblock-1] holds sorted order
-      if (*budget < 0), sorting was abandoned
-*/
-
-#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
-#define SETMASK (1 << 21)
-#define CLEARMASK (~(SETMASK))
-
-static
-void mainSort ( UInt32* ptr, 
-                UChar*  block,
-                UInt16* quadrant, 
-                UInt32* ftab,
-                Int32   nblock,
-                Int32   verb,
-                Int32*  budget )
-{
-   Int32  i, j, k, ss, sb;
-   Int32  runningOrder[256];
-   Bool   bigDone[256];
-   Int32  copyStart[256];
-   Int32  copyEnd  [256];
-   UChar  c1;
-   Int32  numQSorted;
-   UInt16 s;
-   if (verb >= 4) VPrintf0 ( "        main sort initialise ...\n" );
-
-   /*-- set up the 2-byte frequency table --*/
-   for (i = 65536; i >= 0; i--) ftab[i] = 0;
-
-   j = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-      quadrant[i-1] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
-      ftab[j]++;
-      quadrant[i-2] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
-      ftab[j]++;
-      quadrant[i-3] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
-      ftab[j]++;
-   }
-   for (; i >= 0; i--) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-   }
-
-   /*-- (emphasises close relationship of block & quadrant) --*/
-   for (i = 0; i < BZ_N_OVERSHOOT; i++) {
-      block   [nblock+i] = block[i];
-      quadrant[nblock+i] = 0;
-   }
-
-   if (verb >= 4) VPrintf0 ( "        bucket sorting ...\n" );
-
-   /*-- Complete the initial radix sort --*/
-   for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];
-
-   s = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-      s = (s >> 8) | (block[i-1] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-1;
-      s = (s >> 8) | (block[i-2] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-2;
-      s = (s >> 8) | (block[i-3] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-3;
-   }
-   for (; i >= 0; i--) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-   }
-
-   /*--
-      Now ftab contains the first loc of every small bucket.
-      Calculate the running order, from smallest to largest
-      big bucket.
-   --*/
-   for (i = 0; i <= 255; i++) {
-      bigDone     [i] = False;
-      runningOrder[i] = i;
-   }
-
-   {
-      Int32 vv;
-      Int32 h = 1;
-      do h = 3 * h + 1; while (h <= 256);
-      do {
-         h = h / 3;
-         for (i = h; i <= 255; i++) {
-            vv = runningOrder[i];
-            j = i;
-            while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
-               runningOrder[j] = runningOrder[j-h];
-               j = j - h;
-               if (j <= (h - 1)) goto zero;
-            }
-            zero:
-            runningOrder[j] = vv;
-         }
-      } while (h != 1);
-   }
-
-   /*--
-      The main sorting loop.
-   --*/
-
-   numQSorted = 0;
-
-   for (i = 0; i <= 255; i++) {
-
-      /*--
-         Process big buckets, starting with the least full.
-         Basically this is a 3-step process in which we call
-         mainQSort3 to sort the small buckets [ss, j], but
-         also make a big effort to avoid the calls if we can.
-      --*/
-      ss = runningOrder[i];
-
-      /*--
-         Step 1:
-         Complete the big bucket [ss] by quicksorting
-         any unsorted small buckets [ss, j], for j != ss.  
-         Hopefully previous pointer-scanning phases have already
-         completed many of the small buckets [ss, j], so
-         we don't have to sort them at all.
-      --*/
-      for (j = 0; j <= 255; j++) {
-         if (j != ss) {
-            sb = (ss << 8) + j;
-            if ( ! (ftab[sb] & SETMASK) ) {
-               Int32 lo = ftab[sb]   & CLEARMASK;
-               Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
-               if (hi > lo) {
-                  if (verb >= 4)
-                     VPrintf4 ( "        qsort [0x%x, 0x%x]   "
-                                "done %d   this %d\n",
-                                ss, j, numQSorted, hi - lo + 1 );
-                  mainQSort3 ( 
-                     ptr, block, quadrant, nblock, 
-                     lo, hi, BZ_N_RADIX, budget 
-                  );   
-                  numQSorted += (hi - lo + 1);
-                  if (*budget < 0) return;
-               }
-            }
-            ftab[sb] |= SETMASK;
-         }
-      }
-
-      AssertH ( !bigDone[ss], 1006 );
-
-      /*--
-         Step 2:
-         Now scan this big bucket [ss] so as to synthesise the
-         sorted order for small buckets [t, ss] for all t,
-         including, magically, the bucket [ss,ss] too.
-         This will avoid doing Real Work in subsequent Step 1's.
-      --*/
-      {
-         for (j = 0; j <= 255; j++) {
-            copyStart[j] =  ftab[(j << 8) + ss]     & CLEARMASK;
-            copyEnd  [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
-         }
-         for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1])
-               ptr[ copyStart[c1]++ ] = k;
-         }
-         for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1]) 
-               ptr[ copyEnd[c1]-- ] = k;
-         }
-      }
-
-      AssertH ( copyStart[ss]-1 == copyEnd[ss], 1007 );
-
-      for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;
-
-      /*--
-         Step 3:
-         The [ss] big bucket is now done.  Record this fact,
-         and update the quadrant descriptors.  Remember to
-         update quadrants in the overshoot area too, if
-         necessary.  The "if (i < 255)" test merely skips
-         this updating for the last bucket processed, since
-         updating for the last bucket is pointless.
-
-         The quadrant array provides a way to incrementally
-         cache sort orderings, as they appear, so as to 
-         make subsequent comparisons in fullGtU() complete
-         faster.  For repetitive blocks this makes a big
-         difference (but not big enough to be able to avoid
-         the fallback sorting mechanism, exponential radix sort).
-
-         The precise meaning is: at all times:
-
-            for 0 <= i < nblock and 0 <= j <= nblock
-
-            if block[i] != block[j], 
-
-               then the relative values of quadrant[i] and 
-                    quadrant[j] are meaningless.
-
-               else {
-                  if quadrant[i] < quadrant[j]
-                     then the string starting at i lexicographically
-                     precedes the string starting at j
-
-                  else if quadrant[i] > quadrant[j]
-                     then the string starting at j lexicographically
-                     precedes the string starting at i
-
-                  else
-                     the relative ordering of the strings starting
-                     at i and j has not yet been determined.
-               }
-      --*/
-      bigDone[ss] = True;
-
-      if (i < 255) {
-         Int32 bbStart  = ftab[ss << 8] & CLEARMASK;
-         Int32 bbSize   = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
-         Int32 shifts   = 0;
-
-         while ((bbSize >> shifts) > 65534) shifts++;
-
-         for (j = bbSize-1; j >= 0; j--) {
-            Int32 a2update     = ptr[bbStart + j];
-            UInt16 qVal        = (UInt16)(j >> shifts);
-            quadrant[a2update] = qVal;
-            if (a2update < BZ_N_OVERSHOOT)
-               quadrant[a2update + nblock] = qVal;
-         }
-         AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
-      }
-
-   }
-
-   if (verb >= 4)
-      VPrintf3 ( "        %d pointers, %d sorted, %d scanned\n",
-                 nblock, numQSorted, nblock - numQSorted );
-}
-
-#undef BIGFREQ
-#undef SETMASK
-#undef CLEARMASK
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)arr2)  [0 .. nblock-1] holds block
-      arr1 exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)arr2) [0 .. nblock-1] holds block
-      All other areas of block destroyed
-      ftab [ 0 .. 65536 ] destroyed
-      arr1 [0 .. nblock-1] holds sorted order
-*/
-void BZ2_blockSort ( EState* s )
-{
-   UInt32* ptr    = s->ptr; 
-   UChar*  block  = s->block;
-   UInt32* ftab   = s->ftab;
-   Int32   nblock = s->nblock;
-   Int32   verb   = s->verbosity;
-   Int32   wfact  = s->workFactor;
-   UInt16* quadrant;
-   Int32   budget;
-   Int32   budgetInit;
-   Int32   i;
-
-   if (nblock < 10000) {
-      fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-   } else {
-      /* Calculate the location for quadrant, remembering to get
-         the alignment right.  Assumes that &(block[0]) is at least
-         2-byte aligned -- this should be ok since block is really
-         the first section of arr2.
-      */
-      i = nblock+BZ_N_OVERSHOOT;
-      if (i & 1) i++;
-      quadrant = (UInt16*)(&(block[i]));
-
-      /* (wfact-1) / 3 puts the default-factor-30
-         transition point at very roughly the same place as 
-         with v0.1 and v0.9.0.  
-         Not that it particularly matters any more, since the
-         resulting compressed stream is now the same regardless
-         of whether or not we use the main sort or fallback sort.
-      */
-      if (wfact < 1  ) wfact = 1;
-      if (wfact > 100) wfact = 100;
-      budgetInit = nblock * ((wfact-1) / 3);
-      budget = budgetInit;
-
-      mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
-      if (verb >= 3) 
-         VPrintf3 ( "      %d work, %d block, ratio %5.2f\n",
-                    budgetInit - budget,
-                    nblock, 
-                    (float)(budgetInit - budget) /
-                    (float)(nblock==0 ? 1 : nblock) ); 
-      if (budget < 0) {
-         if (verb >= 2) 
-            VPrintf0 ( "    too repetitive; using fallback"
-                       " sorting algorithm\n" );
-         fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-      }
-   }
-
-   s->origPtr = -1;
-   for (i = 0; i < s->nblock; i++)
-      if (ptr[i] == 0)
-         { s->origPtr = i; break; };
-
-   AssertH( s->origPtr != -1, 1003 );
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                       blocksort.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.c b/mdk-stage1/bzlib/bzlib.c
deleted file mode 100644
index b1fc85236..000000000
--- a/mdk-stage1/bzlib/bzlib.c
+++ /dev/null
@@ -1,1567 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Library top-level functions.                          ---*/
-/*---                                               bzlib.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * made zero-length BZ_FLUSH work correctly in bzCompress().
-      * fixed bzWrite/bzRead to ignore zero-length requests.
-      * fixed bzread to correctly handle read requests after EOF.
-      * wrong parameter order in call to bzDecompressInit in
-        bzBuffToBuffDecompress.  Fixed.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Compression stuff                           ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------------*/
-#ifndef BZ_NO_STDIO
-void BZ2_bz__AssertH__fail ( int errcode )
-{
-   fprintf(stderr, 
-      "\n\nbzip2/libbzip2: internal error number %d.\n"
-      "This is a bug in bzip2/libbzip2, %s.\n"
-      "Please report it to me at: jseward@acm.org.  If this happened\n"
-      "when you were using some program which uses libbzip2 as a\n"
-      "component, you should also report this bug to the author(s)\n"
-      "of that program.  Please make an effort to report this bug;\n"
-      "timely and accurate bug reports eventually lead to higher\n"
-      "quality software.  Thanks.  Julian Seward, 21 March 2000.\n\n",
-      errcode,
-      BZ2_bzlibVersion()
-   );
-   exit(3);
-}
-#endif
-
-
-/*---------------------------------------------------*/
-static
-int bz_config_ok ( void )
-{
-   if (sizeof(int)   != 4) return 0;
-   if (sizeof(short) != 2) return 0;
-   if (sizeof(char)  != 1) return 0;
-   return 1;
-}
-
-
-/*---------------------------------------------------*/
-static
-void* default_bzalloc ( void* opaque __attribute__ ((unused)), Int32 items, Int32 size )
-{
-   void* v = malloc ( items * size );
-   return v;
-}
-
-static
-void default_bzfree ( void* opaque __attribute__ ((unused)), void* addr )
-{
-   if (addr != NULL) free ( addr );
-}
-
-
-/*---------------------------------------------------*/
-static
-void prepare_new_block ( EState* s )
-{
-   Int32 i;
-   s->nblock = 0;
-   s->numZ = 0;
-   s->state_out_pos = 0;
-   BZ_INITIALISE_CRC ( s->blockCRC );
-   for (i = 0; i < 256; i++) s->inUse[i] = False;
-   s->blockNo++;
-}
-
-
-/*---------------------------------------------------*/
-static
-void init_RL ( EState* s )
-{
-   s->state_in_ch  = 256;
-   s->state_in_len = 0;
-}
-
-
-static
-Bool isempty_RL ( EState* s )
-{
-   if (s->state_in_ch < 256 && s->state_in_len > 0)
-      return False; else
-      return True;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressInit) 
-                    ( bz_stream* strm, 
-                     int        blockSize100k,
-                     int        verbosity,
-                     int        workFactor )
-{
-   Int32   n;
-   EState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL || 
-       blockSize100k < 1 || blockSize100k > 9 ||
-       workFactor < 0 || workFactor > 250)
-     return BZ_PARAM_ERROR;
-
-   if (workFactor == 0) workFactor = 30;
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(EState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm = strm;
-
-   s->arr1 = NULL;
-   s->arr2 = NULL;
-   s->ftab = NULL;
-
-   n       = 100000 * blockSize100k;
-   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
-   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
-   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
-
-   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
-      if (s->arr1 != NULL) BZFREE(s->arr1);
-      if (s->arr2 != NULL) BZFREE(s->arr2);
-      if (s->ftab != NULL) BZFREE(s->ftab);
-      if (s       != NULL) BZFREE(s);
-      return BZ_MEM_ERROR;
-   }
-
-   s->blockNo           = 0;
-   s->state             = BZ_S_INPUT;
-   s->mode              = BZ_M_RUNNING;
-   s->combinedCRC       = 0;
-   s->blockSize100k     = blockSize100k;
-   s->nblockMAX         = 100000 * blockSize100k - 19;
-   s->verbosity         = verbosity;
-   s->workFactor        = workFactor;
-
-   s->block             = (UChar*)s->arr2;
-   s->mtfv              = (UInt16*)s->arr1;
-   s->zbits             = NULL;
-   s->ptr               = (UInt32*)s->arr1;
-
-   strm->state          = s;
-   strm->total_in_lo32  = 0;
-   strm->total_in_hi32  = 0;
-   strm->total_out_lo32 = 0;
-   strm->total_out_hi32 = 0;
-   init_RL ( s );
-   prepare_new_block ( s );
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void add_pair_to_block ( EState* s )
-{
-   Int32 i;
-   UChar ch = (UChar)(s->state_in_ch);
-   for (i = 0; i < s->state_in_len; i++) {
-      BZ_UPDATE_CRC( s->blockCRC, ch );
-   }
-   s->inUse[s->state_in_ch] = True;
-   switch (s->state_in_len) {
-      case 1:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 2:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 3:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      default:
-         s->inUse[s->state_in_len-4] = True;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = ((UChar)(s->state_in_len-4));
-         s->nblock++;
-         break;
-   }
-}
-
-
-/*---------------------------------------------------*/
-static
-void flush_RL ( EState* s )
-{
-   if (s->state_in_ch < 256) add_pair_to_block ( s );
-   init_RL ( s );
-}
-
-
-/*---------------------------------------------------*/
-#define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
-{                                                 \
-   UInt32 zchh = (UInt32)(zchh0);                 \
-   /*-- fast track the common case --*/           \
-   if (zchh != zs->state_in_ch &&                 \
-       zs->state_in_len == 1) {                   \
-      UChar ch = (UChar)(zs->state_in_ch);        \
-      BZ_UPDATE_CRC( zs->blockCRC, ch );          \
-      zs->inUse[zs->state_in_ch] = True;          \
-      zs->block[zs->nblock] = (UChar)ch;          \
-      zs->nblock++;                               \
-      zs->state_in_ch = zchh;                     \
-   }                                              \
-   else                                           \
-   /*-- general, uncommon cases --*/              \
-   if (zchh != zs->state_in_ch ||                 \
-      zs->state_in_len == 255) {                  \
-      if (zs->state_in_ch < 256)                  \
-         add_pair_to_block ( zs );                \
-      zs->state_in_ch = zchh;                     \
-      zs->state_in_len = 1;                       \
-   } else {                                       \
-      zs->state_in_len++;                         \
-   }                                              \
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_input_until_stop ( EState* s )
-{
-   Bool progress_in = False;
-
-   if (s->mode == BZ_M_RUNNING) {
-
-      /*-- fast track the common case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-      }
-
-   } else {
-
-      /*-- general, uncommon case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         /*-- flush/finish end? --*/
-         if (s->avail_in_expect == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-         s->avail_in_expect--;
-      }
-   }
-   return progress_in;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_output_until_stop ( EState* s )
-{
-   Bool progress_out = False;
-
-   while (True) {
-
-      /*-- no output space? --*/
-      if (s->strm->avail_out == 0) break;
-
-      /*-- block done? --*/
-      if (s->state_out_pos >= s->numZ) break;
-
-      progress_out = True;
-      *(s->strm->next_out) = s->zbits[s->state_out_pos];
-      s->state_out_pos++;
-      s->strm->avail_out--;
-      s->strm->next_out++;
-      s->strm->total_out_lo32++;
-      if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-   }
-
-   return progress_out;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool handle_compress ( bz_stream* strm )
-{
-   Bool progress_in  = False;
-   Bool progress_out = False;
-   EState* s = strm->state;
-   
-   while (True) {
-
-      if (s->state == BZ_S_OUTPUT) {
-         progress_out |= copy_output_until_stop ( s );
-         if (s->state_out_pos < s->numZ) break;
-         if (s->mode == BZ_M_FINISHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-         prepare_new_block ( s );
-         s->state = BZ_S_INPUT;
-         if (s->mode == BZ_M_FLUSHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-      }
-
-      if (s->state == BZ_S_INPUT) {
-         progress_in |= copy_input_until_stop ( s );
-         if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
-            flush_RL ( s );
-            BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->nblock >= s->nblockMAX) {
-            BZ2_compressBlock ( s, False );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->strm->avail_in == 0) {
-            break;
-         }
-      }
-
-   }
-
-   return progress_in || progress_out;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
-{
-   Bool progress;
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   preswitch:
-   switch (s->mode) {
-
-      case BZ_M_IDLE:
-         return BZ_SEQUENCE_ERROR;
-
-      case BZ_M_RUNNING:
-         if (action == BZ_RUN) {
-            progress = handle_compress ( strm );
-            return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
-         } 
-         else
-	 if (action == BZ_FLUSH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FLUSHING;
-            goto preswitch;
-         }
-         else
-         if (action == BZ_FINISH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FINISHING;
-            goto preswitch;
-         }
-         else 
-            return BZ_PARAM_ERROR;
-
-      case BZ_M_FLUSHING:
-         if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
-         s->mode = BZ_M_RUNNING;
-         return BZ_RUN_OK;
-
-      case BZ_M_FINISHING:
-         if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (!progress) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FINISH_OK;
-         s->mode = BZ_M_IDLE;
-         return BZ_STREAM_END;
-   }
-   return BZ_OK; /*--not reached--*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
-{
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   if (s->arr1 != NULL) BZFREE(s->arr1);
-   if (s->arr2 != NULL) BZFREE(s->arr2);
-   if (s->ftab != NULL) BZFREE(s->ftab);
-   BZFREE(strm->state);
-
-   strm->state = NULL;   
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-/*--- Decompression stuff                         ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressInit) 
-                     ( bz_stream* strm, 
-                       int        verbosity,
-                       int        small )
-{
-   DState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   if (small != 0 && small != 1) return BZ_PARAM_ERROR;
-   if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
-
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(DState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm                  = strm;
-   strm->state              = s;
-   s->state                 = BZ_X_MAGIC_1;
-   s->bsLive                = 0;
-   s->bsBuff                = 0;
-   s->calculatedCombinedCRC = 0;
-   strm->total_in_lo32      = 0;
-   strm->total_in_hi32      = 0;
-   strm->total_out_lo32     = 0;
-   strm->total_out_hi32     = 0;
-   s->smallDecompress       = (Bool)small;
-   s->ll4                   = NULL;
-   s->ll16                  = NULL;
-   s->tt                    = NULL;
-   s->currBlockNo           = 0;
-   s->verbosity             = verbosity;
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_FAST ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      /* restore */
-      UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
-      UChar         c_state_out_ch       = s->state_out_ch;
-      Int32         c_state_out_len      = s->state_out_len;
-      Int32         c_nblock_used        = s->nblock_used;
-      Int32         c_k0                 = s->k0;
-      UInt32*       c_tt                 = s->tt;
-      UInt32        c_tPos               = s->tPos;
-      char*         cs_next_out          = s->strm->next_out;
-      unsigned int  cs_avail_out         = s->strm->avail_out;
-      /* end restore */
-
-      UInt32       avail_out_INIT = cs_avail_out;
-      Int32        s_save_nblockPP = s->save_nblock+1;
-      unsigned int total_out_lo32_old;
-
-      while (True) {
-
-         /* try to finish existing run */
-         if (c_state_out_len > 0) {
-            while (True) {
-               if (cs_avail_out == 0) goto return_notr;
-               if (c_state_out_len == 1) break;
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               c_state_out_len--;
-               cs_next_out++;
-               cs_avail_out--;
-            }
-            s_state_out_len_eq_one:
-            {
-               if (cs_avail_out == 0) { 
-                  c_state_out_len = 1; goto return_notr;
-               };
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               cs_next_out++;
-               cs_avail_out--;
-            }
-         }   
-         /* can a new run be started? */
-         if (c_nblock_used == s_save_nblockPP) {
-            c_state_out_len = 0; goto return_notr;
-         };   
-         c_state_out_ch = c_k0;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (k1 != c_k0) { 
-            c_k0 = k1; goto s_state_out_len_eq_one; 
-         };
-         if (c_nblock_used == s_save_nblockPP) 
-            goto s_state_out_len_eq_one;
-   
-         c_state_out_len = 2;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         c_state_out_len = 3;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         c_state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST_C(c_k0); c_nblock_used++;
-      }
-
-      return_notr:
-      total_out_lo32_old = s->strm->total_out_lo32;
-      s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
-      if (s->strm->total_out_lo32 < total_out_lo32_old)
-         s->strm->total_out_hi32++;
-
-      /* save */
-      s->calculatedBlockCRC = c_calculatedBlockCRC;
-      s->state_out_ch       = c_state_out_ch;
-      s->state_out_len      = c_state_out_len;
-      s->nblock_used        = c_nblock_used;
-      s->k0                 = c_k0;
-      s->tt                 = c_tt;
-      s->tPos               = c_tPos;
-      s->strm->next_out     = cs_next_out;
-      s->strm->avail_out    = cs_avail_out;
-      /* end save */
-   }
-}
-
-
-
-/*---------------------------------------------------*/
-__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
-{
-   Int32 nb, na, mid;
-   nb = 0;
-   na = 256;
-   do {
-      mid = (nb + na) >> 1;
-      if (indx >= cftab[mid]) nb = mid; else na = mid;
-   }
-   while (na - nb != 1);
-   return nb;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_SMALL ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); s->nblock_used++;
-      }
-
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
-{
-   DState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   while (True) {
-      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
-      if (s->state == BZ_X_OUTPUT) {
-         if (s->smallDecompress)
-            unRLE_obuf_to_output_SMALL ( s ); else
-            unRLE_obuf_to_output_FAST  ( s );
-         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
-            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
-            if (s->verbosity >= 3) 
-               VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC, 
-                          s->calculatedBlockCRC );
-            if (s->verbosity >= 2) VPrintf0 ( "]" );
-            if (s->calculatedBlockCRC != s->storedBlockCRC)
-               return BZ_DATA_ERROR;
-            s->calculatedCombinedCRC 
-               = (s->calculatedCombinedCRC << 1) | 
-                    (s->calculatedCombinedCRC >> 31);
-            s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
-            s->state = BZ_X_BLKHDR_1;