diff options
Diffstat (limited to 'perl-install/ChangeLog')
| -rw-r--r-- | perl-install/ChangeLog | 25165 |
1 files changed, 0 insertions, 25165 deletions
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog deleted file mode 100644 index e74787675..000000000 --- a/perl-install/ChangeLog +++ /dev/null @@ -1,25165 +0,0 @@ -2002/07/07 daouda - - * Makefile: - - remove share/wizard.rc in DISTFILE - - * drakxtools.spec: - - directory should exist before mv'ing things (mkdir - %%buildroot%%_initrddir) - - mv typo in %install section (titi sux) - -2002/07/07 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm: smarter raidAutoStartRaidtab - great new raidAutoStartRaidtab allowing to handle existing software - raids - even when RAID_AUTORUN is not supported by kernel (which is the case for - us - since md.o is a not builtin the kernel) - remove detect_devices::check (including the annoying log about no - modules for the pci entry) - - * modules.pm: new "append_to_etc_modules" function - remove detect_devices::check (including the annoying log about no - modules for the pci entry) - - * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing - software raids - even when RAID_AUTORUN is not supported by kernel (which is the case for - us - since md.o is a not builtin the kernel) - - * any.pm: small regexp cleanup - - * fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in - favour of isThisFs('nfs', ...) - - * interactive_newt.pm: make the buttons work in all cases - - workaround segfaults - - ensure the perl values are set when calling the clicked_may_quit - callback - - * devices.pm: use c::total_sectors() instead of BLKGETSIZE - - * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and - marked dirty on any actions that destroy the raid - -2002/07/06 Pixel <pixel@mandrakesoft.com> - - * any.pm (ask_users): the user name length must be <= 32 - - * diskdrake/interactive.pm (as suggested by Alexander Skwar) - - in interactive::check_type, check if the package (like jfsprogs) is - installed - - use interactive::check_type where usefull - - cleanup - - * Makefile.config: standalone/drakbug doesn't exist! (why did deush add - it???) - it is standalone/harddrake2, not standalone/harddrake (poor deush must - be loosing his brain :p) - - * diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/ - - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - - remove unused wizard.rc - (as suggested by Alexander Skwar) - - in interactive::check_type, check if the package (like jfsprogs) is - installed - - use interactive::check_type where usefull - - cleanup - - * fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie - can't be used as mountpoints), dixit redhat - (package_needed_for_partition_type): return the package needed for a - partition type - (check_type): cleanup - - * install_any.pm (setDefaultPackages): use - fsedit::package_needed_for_partition_type to get things like jfsprogs - - * fs.pm: supermount now handles fs=auto, using it :) - - * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: - - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - - remove unused wizard.rc - -2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * Makefile.config: add the harddrake service which was missing - - * printer.pm: try to simplify - - * harddrake/ui.pm: simplify: use reverse - - help system: - - add an help entry in help menu; - - begin to describe information fields - - - reformat license in about window - - - information frame (mostly fixing incoherency between various hw - classes fields) - - - s/media type/media class/ - - - s/info/Hardware id/ - - - s/device/device file/ - - - split description into manufacturer/description - - - eide devices: - - - rename bus as bus_location - - - set interface_type as bus - - - scsi devices: - - - set bus to SCSI - - - set bus_location to bus:id fields - - - don't print pci subids when non set - - - remove fields that were already used above (vendor id subvendor - subid pci_bus pci_device pci_function) - - - no need to return window after program exit - - - print usage if needed - - - embed hardware tree in a "detected hardware" frame - - - cleanups: - - - rename widget2 as frame - - - remove dead commented code - - * drakxtools.spec: add harddrake2 service - - * standalone/icons/harddrake2/webcam.png, - standalone/icons/harddrake2/harddrake.png, - standalone/icons/harddrake2/keyboard.png, - standalone/icons/harddrake2/ide_hd.png, - standalone/icons/harddrake2/cable.png, - standalone/icons/harddrake2/video.png, - standalone/icons/harddrake2/tape.png, - standalone/icons/harddrake2/joystick.png, - standalone/icons/harddrake2/harddisk.png, - standalone/icons/harddrake2/usb.png, - standalone/icons/harddrake2/memory.png, - standalone/icons/harddrake2/hw_network.png, - standalone/icons/harddrake2/scsi_hd.png, - standalone/icons/harddrake2/unknown.png, - standalone/icons/harddrake2/floppy.png, - standalone/icons/harddrake2/hw_printer.png, - standalone/icons/harddrake2/scanner.png, - standalone/icons/harddrake2/cd.png, - standalone/icons/harddrake2/isdn.png, - standalone/icons/harddrake2/tv.png, - standalone/icons/harddrake2/sound.png, - standalone/icons/harddrake2/scsi.png, - standalone/icons/harddrake2/cpu.png, - standalone/icons/harddrake2/hw_mouse.png, - standalone/icons/harddrake2/modem.png, - standalone/icons/harddrake2/K7.png: add harddrake2 icons - -2002/07/06 Pixel <pixel@mandrakesoft.com> - - * any.pm (ask_users): the user name length must be <= 32 - - * commands.pm: adapt to new modprobe.pm - - * diskdrake/hd_gtk.pm: - - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - - remove unused wizard.rc - (as suggested by Alexander Skwar) - - in interactive::check_type, check if the package (like jfsprogs) is - installed - - use interactive::check_type where usefull - - cleanup - - * diskdrake/interactive.pm (as suggested by Alexander Skwar) - - in interactive::check_type, check if the package (like jfsprogs) is - installed - - use interactive::check_type where usefull - - cleanup - (Resize): resize2fs handles ext3 :) - - * install_any.pm (setDefaultPackages): use - fsedit::package_needed_for_partition_type to get things like jfsprogs - when merge_fstabs, handle in a different way mtab and fstab (or - manualFstab) - => this allows to force the type&options in manualFstab - - * fsedit.pm (package_needed_for_partition_type): return the package needed - for a partition type - (check_type): cleanup - - * docs/comparisons: various remarks about mandrake - - * partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned - disks to install - (but no way to create such beasts) - - * Makefile.config: standalone/drakbug doesn't exist! (why did deush add - it???) - it is standalone/harddrake2, not standalone/harddrake (poor deush must - be loosing his brain :p) - add harddrake pm's - - * partition_table.pm: Allows people having PVs on unpartitioned disks to - install - (but no way to create such beasts) - cleanup - - * fs.pm: supermount now handles fs=auto, using it :) - when merge_fstabs, handle in a different way mtab and fstab (or - manualFstab) - => this allows to force the type&options in manualFstab - - * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: - - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - - remove unused wizard.rc - -2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * standalone/lsnetdrake: simplify - - * Makefile: add harddrake to DISTFILES - - * printer.pm: try to simplify - - * harddrake/TODO: add bits regarding eide and scsi - - * standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes - - * harddrake/ui.pm: simplify: use reverse - - help system: - - add an help entry in help menu; - - begin to describe information fields - - - reformat license in about window - - - information frame (mostly fixing incoherency between various hw - classes fields) - - - s/media type/media class/ - - - s/info/Hardware id/ - - - s/device/device file/ - - - split description into manufacturer/description - - - eide devices: - - - rename bus as bus_location - - - set interface_type as bus - - - scsi devices: - - - set bus to SCSI - - - set bus_location to bus:id fields - - - don't print pci subids when non set - - - remove fields that were already used above (vendor id subvendor - subid pci_bus pci_device pci_function) - - - no need to return window after program exit - - - print usage if needed - - - embed hardware tree in a "detected hardware" frame - - - cleanups: - - - rename widget2 as frame - - - remove dead commented code - - * harddrake/data.pm: add a configurator for sound - - * standalone/icons/harddrake2/cable.png, - standalone/icons/harddrake2/tape.png, - standalone/icons/harddrake2/usb.png, - standalone/icons/harddrake2/hw_network.png, - standalone/icons/harddrake2/unknown.png, - standalone/icons/harddrake2/hw_printer.png, - standalone/icons/harddrake2/scanner.png, - standalone/icons/harddrake2/isdn.png, - standalone/icons/harddrake2/cd.png, - standalone/icons/harddrake2/scsi.png, - standalone/icons/harddrake2/hw_mouse.png, - standalone/icons/harddrake2/K7.png, - standalone/icons/harddrake2/webcam.png, - standalone/icons/harddrake2/harddrake.png, - standalone/icons/harddrake2/keyboard.png, - standalone/icons/harddrake2/ide_hd.png, - standalone/icons/harddrake2/harddisk.png, - standalone/icons/harddrake2/joystick.png, - standalone/icons/harddrake2/video.png, - standalone/icons/harddrake2/memory.png, - standalone/icons/harddrake2/scsi_hd.png, - standalone/icons/harddrake2/floppy.png, - standalone/icons/harddrake2/sound.png, - standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png, - standalone/icons/harddrake2/modem.png: add harddrake2 icons - -2002/07/05 daouda - - * Makefile.config: - - add harddrake drakbug drakTermServ to STANDALONEPMS_ - - * drakxtools.spec: - - snapshot - - new entries: - o harddrake2 : new hardware detection && configuration tool - o drakbugreport: bug reporting tool a la Kde (not working!) - o drakTermServ : configuration tool for diskless stations. - -2002/07/05 Pixel <pixel@mandrakesoft.com> - - * fs.pm (prepare_write_fstab): for supermount, have "none" as the device - (cleaner, and - more coherent with the "supermount" script (tx to FredC)) - -2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * install_steps_interactive.pm: minimize startup: only load - harddrake::bttv if the user click on "tv - card" field in the hw summary window - use harddrake::bttv to let people configure their tv card if it's - misdetected - - * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is - a module) - POSIX is no more used too. - - * harddrake/bttv.pm: remove device test: there're only two harddrake::bttv - users, - install_steps_interactive.pm and drakxtv which both have already - tested that a bttv managed tv card is there. - - add more tv cards - - enable users to select number of buffers for mmap() - - better description for pll setting - - - add tooltips help for some entries - tv cards list: - - - split multi-cards entries - - - reverse the hash (needed since now bttv card types are not - anymore unique) - - - complete the list from various sources - - - use a tree to display the list, it's clearer now since it's - splitted by vendors - - - longer message - - remove uneeded stuff for modules ("#!/..", "use lib..", "use - standalone", ...) - - - simplify bttv options managment: - - - use if_, thanks MDK::Common - - - s/mapn/map by using a hash at first - - - s/mapn{if}/map{if_} - - - don't read/write modules.conf here, drakx take care of that for us - - thus, the test program became: - - #!/usr/bin/perl - - use strict; - use lib qw(/usr/lib/libDrakX); - - use standalone; - use bttv; - use interactive; - use modules; - - modules::read_conf; - bttv::config('interactive'->vnew()); - modules::write_conf; - spec29: bttv configuration part of drakxtv. - it can be used by: - - #!/usr/bin/perl - - use strict; - use lib qw(/usr/lib/libDrakX); - - use standalone; - use harddrake::bttv; - use interactive; - - bttv::config('interactive'->vnew()); - - * drakxtools.spec: fix typo - fix dirs1/dirs2 mismatch - - M-q descriptions - - simplify file lists building - - we can use several -f on one "%%files" line - - * standalone/drakxtv: if we're root and there's a tv card managed by bttv, - offer to - configure bttv trough harddrake::bttv - - * tools/cvslog2changelog.pl: typo fix - - * harddrake/data.pm: remove uneeded "#!/.." and "use lib" - -2002/07/05 François Pons <fpons@mandrakesoft.com> - - * Makefile: - - handle /lib/i686 case - - replace Mandrake/RPMS with Mandrake/RPMS* - -2002/07/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, - mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, - mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, - mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h, - mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h, - mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h, - mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, - mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, - mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h, - mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: - pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified - sources) - -2002/07/05 Pixel <pixel@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use - strict" - do not look at the mar files anymore, only use kernel/modules.pl (and so - list_modules.pm) - - * diskdrake/interactive.pm: handle comments in fstab - - * fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF - the entry is for the same mountpoint AND the same device - handle comments in fstab - - * share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require* - gnupg, only suggest it very strongly :) - - * mdk-stage1/usb-resource/update-usb-ids.pl: - - do not use mar files for the list of modules, use list_modules.pm - via kernel/modules.pl instead - - use read_pcitable to parse usbtable - -2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com - - * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is - a module) - POSIX is no more used too. - - * drakxtools.spec: fix typo - fix dirs1/dirs2 mismatch - - M-q descriptions - - simplify file lists building - - we can use several -f on one "%%files" line - - add preliminary harddrake support - - - clean %post - - - bump version number - - * harddrake/bttv.pm: - - remove uneeded stuff for modules ("#!/..", "use lib..", "use - standalone", ...) - - simplify bttv options managment: - - - use if_, thanks MDK::Common - - - s/mapn/map by using a hash at first - - - s/mapn{if}/map{if_} - - - don't read/write modules.conf here, drakx take care of that for us - - thus, the test program became: - - #!/usr/bin/perl - - use strict; - use lib qw(/usr/lib/libDrakX); - - use standalone; - use bttv; - use interactive; - use modules; - - modules::read_conf; - bttv::config('interactive'->vnew()); - modules::write_conf; - spec29: bttv configuration part of drakxtv. - it can be used by: - - #!/usr/bin/perl - - use strict; - use lib qw(/usr/lib/libDrakX); - - use standalone; - use harddrake::bttv; - use interactive; - - bttv::config('interactive'->vnew()); - - * Makefile: don't use sed when not needed - - * install_steps_interactive.pm: minimize startup: only load - harddrake::bttv if the user click on "tv - card" field in the hw summary window - use harddrake::bttv to let people configure their tv card if it's - misdetected - - * harddrake/data.pm: remove uneeded "#!/.." and "use lib" - -2002/07/04 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps_auto_install.pm, - install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm, - printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm, - install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new - modules.pm - - * c/stuff.xs.pm: adapt to new ldetect - - * modules.pm: reworked, cleaned: - - the list of modules is moved to kernel/list_modules.pm (and a few - functions too) - - new "add_probeall" function (similar to "add_alias") - -> used for scsi_hostadapter and usb-interface - - "load_multi" removed in favour of "load" which is now more powerful - - load_thiskind renamed load_category - - get_that_type renamed probe_category - - %modules::drivers dropped (handled for list_modules) - still more cleanup to come - - * rescue/make_rescue_img: adapt to the move all.modules -> - kernel/all.modules and all.kernels -> kernel/all.kernels - - * modparm.pm: rework, cleanup, simplify and make it work - - * install2: create symlink list_modules.pm in current directory for - testing purpose - - * Makefile: when building the tar for drakxtools, handle specially - list_modules.pm - adapt to the move all.modules -> kernel/all.modules and all.kernels -> - kernel/all.kernels - - * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel" - containing: - - all.modules all.kernels update_kernel - - part of perl-install/modules.pm now in kernel/list_modules.pm and - kernel/modules.pl - - update_kernel cleaned (it doesn't mention module names anymore, it - is now in kernel/modules.pl) - - cleanup Makefile - - mdk-stage1 doesn't depend on perl-install anymore - (more precisely mdk-stage1/pci-resource/update-pci-ids.pl) - - * any.pm: reworked & cleaned the kernel modules part - - adapt to new modules.pm - - adapt to new modparm.pm - - renamed setup_thiskind to load_category - - renamed setup_thiskind_backend to load_category_no_message - - * share/po/Makefile: make the "clean" rule less verbose - -2002/07/04 daouda - - * standalone/draknet: - - don't display clear password - -2002/07/04 fcrozat - - * share/rpmsrate: Fix GNOME2 packages - Install urw-fonts when installing XFree - -2002/07/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated Turkish file - - * share/po/fr.po: updated French file - - * lang.pm: Changed some languages to defautl to utf-8 - removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left - languages) - -2002/07/04 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps_auto_install.pm, - install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm, - printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm, - install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new - modules.pm - - * c/stuff.xs.pm: adapt to new ldetect - - * modules.pm: reworked, cleaned: - - the list of modules is moved to kernel/list_modules.pm (and a few - functions too) - - new "add_probeall" function (similar to "add_alias") - -> used for scsi_hostadapter and usb-interface - - "load_multi" removed in favour of "load" which is now more powerful - - load_thiskind renamed load_category - - get_that_type renamed probe_category - - %modules::drivers dropped (handled for list_modules) - still more cleanup to come - - * getpkgs_deps, do_resize_fat: removed since unused - - * Makefile, rescue/make_rescue_img: adapt to the move all.modules -> - kernel/all.modules and all.kernels -> kernel/all.kernels - - * modparm.pm: rework, cleanup, simplify and make it work - - * install2: create symlink list_modules.pm in current directory for - testing purpose - - * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel" - containing: - - all.modules all.kernels update_kernel - - part of perl-install/modules.pm now in kernel/list_modules.pm and - kernel/modules.pl - - update_kernel cleaned (it doesn't mention module names anymore, it - is now in kernel/modules.pl) - - cleanup Makefile - - mdk-stage1 doesn't depend on perl-install anymore - (more precisely mdk-stage1/pci-resource/update-pci-ids.pl) - - * tools/specific_arch: simplified using MDK::Common - - * any.pm: reworked & cleaned the kernel modules part - - adapt to new modules.pm - - adapt to new modparm.pm - - renamed setup_thiskind to load_category - - renamed setup_thiskind_backend to load_category_no_message - - * share/po/Makefile: make the "clean" rule less verbose - -2002/07/04 Thierry Vignaud <tvignaud@mandrakesoft.com - - * harddrake/TODO: add harddrake2 todo list - - * harddrake/data.pm: get rid of 'use vars' - remove wait_message hack for printerdraker, better use class_discard - harddrake2: "the return of the vengeance son" - - harddrake/data.pm: the data structure - - harddrake/ui.pm: the ui code - - - standalone/service_harddrake: the init.d service (which need a few - polishing (timeout, ...) - - - standalone/harddrake2: the ui caller which need to be dadou/ln -fied - - * harddrake/ui.pm: don't stack signals on config buttons - - remove no more used @pid_launched - - better GUI reactivity: don't wait for config tool to complete, just - "fork and forget" [(c) us air force] and refuse to run another - config tool until the first one to complete - print "Running $configurator ..." in status bar while running a config - tool - - POSIX is needed for POSIX::wait - - move strict and standalone require at top - - - c is unused - - - comment exceptions in devices loop (ie skip classes without any - devices or any detector - - - optimize away $pid - fix move from harddrake.pm to harddrake/data.pm: - - - menu does appear - - - information fields are translated from raw to english again - harddrake2: "the return of the vengeance son" - - - harddrake/data.pm: the data structure - - - harddrake/ui.pm: the ui code - - - standalone/service_harddrake: the init.d service (which need a few - polishing (timeout, ...) - - - standalone/harddrake2: the ui caller which need to be dadou/ln -fied - - * detect_devices.pm: add tapes() for harddrake2 - - * standalone/harddrake2, standalone/service_harddrake: harddrake2: "the - return of the vengeance son" - - harddrake/data.pm: the data structure - - harddrake/ui.pm: the ui code - - - standalone/service_harddrake: the init.d service (which need a few - polishing (timeout, ...) - - - standalone/harddrake2: the ui caller which need to be dadou/ln -fied - -2002/07/03 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/probing.c: fixed static definition when non static - declaration (gcc limitation). - added conditional code around network detection. - -2002/07/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c, - mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c, - mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c, - mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c, - mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c, - mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c, - mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c, - mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W - -2002/07/02 daouda - - * my_gtk.pm: - - fill a combo by default : - gtkcombo_setpopdown_strings($combo_widget,@strings) - -2002/07/02 gbeauchesne - - * c/smp.c: - - TODO: Update ia64 check with /proc/pal/cpuX ? - - TODO: Update x86_64 check when SMP machines are actually available - - Conditionalize compilation of main() with TEST macro - -2002/07/02 Pixel <pixel@mandrakesoft.com> - - * network/smb.pm: try harder to find the full list of servers available, - using "smbclient -L" to - check the workgroup masters - -2002/07/01 Pixel <pixel@mandrakesoft.com> - - * diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point - -2002/06/28 Pixel <pixel@mandrakesoft.com> - - * diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: - - add authentification in diskdrake --smb (esp. for windows NT) - - use "credentials=" to put the passwords - (ideas and investigations from Stew Benedict, - integrated by Pixel, but need testing) - Known bug: if you want to change the password when there are 2 entries - in fstab - using the same username=/password=, writing the credentials is done in - random order, - => you've got one chance in 2 that the password is changed :-( - - * fs.pm: - - add authentification in diskdrake --smb (esp. for windows NT) - - use "credentials=" to put the passwords - (ideas and investigations from Stew Benedict, - integrated by Pixel, but need testing) - Known bug: if you want to change the password when there are 2 entries - in fstab - using the same username=/password=, writing the credentials is done in - random order, - => you've got one chance in 2 that the password is changed :-( - handle spaces in mount points and devices (using \040) - -2002/06/27 Stew Benedict <sbenedict@mandrakesoft.com> - - * standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add - drakTermServ application and icon. - -2002/06/26 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, install_steps_interactive.pm, install2.pm: ensure - licence step is asked in any case (ie. even when selectLanguage is - automatic) - - * any.pm: "my" variables where needed - -2002/06/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po, share/po/ar.po: Updated po files - -2002/06/19 Frederic Lepied <flepied@mandrakesoft.com> - - * Makefile: corrected rules to make distributable rpms. - -2002/06/19 François Pons <fpons@mandrakesoft.com> - - * patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP - Mandrake Linux 8.2. - -2002/06/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: remove a few drivers so that hd.img and network.img are - possible with latest BOOT kernel - -2002/06/19 Pixel <pixel@mandrakesoft.com> - - * standalone/fileshareset: use "wide links = no" for exporting via samba - (thanks to Jan Schäfer) - - * fs.pm: mounting of ntfs after install really mount the partition (thanks - to Buchan Milne) - -2002/06/18 daouda - - * my_gtk.pm: - - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets - -2002/06/18 Frederic Lepied <flepied@mandrakesoft.com> - - * Makefile.drakxtools: manage security subdir. - - * Makefile: added targets to build test and distribution rpms and srpms - (localrpm, - localsrpm, rpm, srpm). - added security to the installed directories - - * pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec, - apps.net_monitor: ripped from the srpm - -2002/06/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated Hungarian file - -2002/06/17 cbelisle - - * standalone/draksec: added server, user and network advanced options - - * any.pm: draksec: customize entries for each options (lists, checkboxes - and text boxes) - Added user,server and network advanced options - - * security/msec.pm: - - Customize entries for each options (checkboxes, text boxes and - lists) - added network, server and user advanced options - -2002/06/15 alus - - * share/po/pl.po: updates - -2002/06/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: Catalan doesn't have French fallback anymore - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/06/11 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by - Philippe Coulon) - -2002/06/10 cbelisle - - * standalone/draksec: Add an entry for the security user email - - * security/msec.pm: Initial commit - - * any.pm: Add security user email entry in draksec - -2002/06/10 daouda - - * network/tools.pm: - - choose country according to timezone. - -2002/06/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * tools/syncrpms: english fix - -2002/06/10 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm: s/class/class_/ for ldetect 0.4 - -2002/06/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * timezone.pm: remove duplicate entry in ntp_servers - - * interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from - interactive_gtk - to my_gtk between widgets creation and real - stuff so that we can now call it with widgets - places differently - -2002/06/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated po file - -2002/06/05 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: adapt to new lilo - -2002/06/05 Pixel <pixel@mandrakesoft.com> - - * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs - - * bootloader.pm: adapt to new lilo - -2002/06/05 Pixel <pixel@mandrakesoft.com> - - * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs - -2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm, - install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english - fixes thx to vincent meyer - -2002/06/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style - instead of weird style - with clearall unset & auto_allocate set - -2002/05/29 alus - - * share/po/pl.po: little fixes - -2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive_gtk.pm: remove typo fix when it's not a fix :-) - small typo - remove typo (hopefully really a typo ;p) - - * any.pm: be a bit more polite - -2002/05/27 François Pons <fpons@mandrakesoft.com> - - * install2.pm: make sure patch is always read after defcfg to take - precedance. - -2002/05/27 Pixel <pixel@mandrakesoft.com> - - * modules.pm: have usb-interface1 for ehci-hcd - -2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * Xconfigurator.pm: dams fixes a bug in the install :-) - -2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: xtraceroute needs 3d - -2002/05/15 alus - - * share/po/Changelog: info about polish translation - -2002/05/14 alus - - * share/po/pl.po: polish finished - updated polish translation - polish updated to near finished. Fuzzy removed and checked - -2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * docs/HACKING: libncurses* also for the sucking neuneux - -2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pl.po, share/po/id.po: updated po file - -2002/05/13 alus - - * share/po/pl.po: mostly finished polish translation.!! - -2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * docs/HACKING: libbzip2* and more explanations about failing compilation - - * mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c: - adapt to gcc-3.1 - -2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: Put back xcin as default XIM for zh_TW.Big5 - - * share/po/eu.po: small corrections - -2002/04/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as - well - -2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po, share/po/hu.po: updated po files - -2002/04/26 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed some machine with two present i830 CGC but only - one in reality. - - * detect_devices.pm: updated usbMice to take care of device declared as - Mouse:USB in usbtable (was - not the case !) - -2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * bootlook.pm: a few english fixes - - * any.pm: fixes - english fixes from v meyer - a few english fixes thx to vincent meyer - -2002/04/19 alus - - * share/po/pl.po: It's only about 100 entries to the end - -2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated Dutch file - - * share/po/hu.po: updated po file - -2002/04/18 alus - - * share/po/pl.po: 3 more long messages - one entry - stil working.... - -2002/04/17 alus - - * share/po/pl.po: Mostly finished polish translation - translations, fixes etc... - -2002/04/17 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: final candidate. - - * rescue/tree/etc/oem: final candidate. - add gcc-cpp to oem install. - -2002/04/16 alus - - * share/po/pl.po: still working - Few fixes - Updated translation. Many strings is not yet translated... - -2002/04/16 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: sync with oem-prepare - fixed stupid error. - forget packdrake module invocation. - fixed to support non standard rpm filename. - - * tools/oem-prepare: add gcc-cpp to always installed. - disable unselection of some package (gmc, all gcc3.0 stuff). - -2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: only main version of automake - -2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated po file - -2002/04/16 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server - dialog box - -2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: ipchains now conflicts with iptables - -2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: Another small fix - Small corrections - -2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ro.po: merged with drakfloppy strings - -2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/mt.po: updated Maltese file - -2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: small typo correction - -2002/04/10 warly - - * share/rpmsrate: autofs -> 2 - -2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains - and iptables - packages conflict - -2002/04/09 Pixel <pixel@mandrakesoft.com> - - * partition_table_dos.pm, partition_table_gpt.pm, - partition_table_empty.pm, partition_table_bsd.pm, - partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic" - error message (thanks to Brian J. Murrell) - -2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fixed a bunch of things - - * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm, - partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm, - printerdrake.pm, network/tools.pm, diskdrake/interactive.pm, - network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm, - network/network.pm, printer.pm, interactive_stdio.pm: fix a few english - strings - -2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with - drakfloppy strings - -2002/04/07 Yves Duret <yduret@mandrakesoft.com> - - * standalone/drakfloppy: moving from his own rpm to drakxtools - - * Makefile.config: add drakfloppy to STANDALONEPMS_ - -2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt - -2002/04/04 sdupont - - * standalone/drakbackup: please yduret, do not commit these changes on cvs - before to test it. - you can say "bugs fixes" only if you have corrected some errors but not - if you create it! - the backup on cd was disabled because the backend is not available for - moment. - - * standalone/drakfont: remove uninteresting yduret changes, - would it be possible to know what are your "bugs fixies" ? - to yduret: I'm the creator of this program so please do not remove my - changes. - -2002/06/05 Pixel <pixel@mandrakesoft.com> - - * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs - -2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm, - install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english - fixes thx to vincent meyer - -2002/06/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style - instead of weird style - with clearall unset & auto_allocate set - -2002/05/29 alus - - * share/po/pl.po: little fixes - -2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive_gtk.pm: remove typo fix when it's not a fix :-) - small typo - remove typo (hopefully really a typo ;p) - - * any.pm: be a bit more polite - -2002/05/27 François Pons <fpons@mandrakesoft.com> - - * install2.pm: make sure patch is always read after defcfg to take - precedance. - -2002/05/27 Pixel <pixel@mandrakesoft.com> - - * modules.pm: have usb-interface1 for ehci-hcd - -2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * Xconfigurator.pm: dams fixes a bug in the install :-) - -2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: xtraceroute needs 3d - -2002/05/15 alus - - * share/po/Changelog: info about polish translation - -2002/05/14 alus - - * share/po/pl.po: polish finished - updated polish translation - polish updated to near finished. Fuzzy removed and checked - -2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * docs/HACKING: libncurses* also for the sucking neuneux - -2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pl.po, share/po/id.po: updated po file - -2002/05/13 alus - - * share/po/pl.po: mostly finished polish translation.!! - -2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * docs/HACKING: libbzip2* and more explanations about failing compilation - - * mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1 - -2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: Put back xcin as default XIM for zh_TW.Big5 - - * share/po/eu.po: small corrections - -2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po, share/po/hu.po: updated po files - -2002/04/26 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed some machine with two present i830 CGC but only - one in reality. - - * detect_devices.pm: updated usbMice to take care of device declared as - Mouse:USB in usbtable (was - not the case !) - -2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * bootlook.pm: a few english fixes - - * any.pm: fixes - english fixes from v meyer - a few english fixes thx to vincent meyer - -2002/04/19 alus - - * share/po/pl.po: It's only about 100 entries to the end - -2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated Dutch file - - * share/po/hu.po: updated po file - -2002/04/18 alus - - * share/po/pl.po: 3 more long messages - one entry - stil working.... - -2002/04/17 alus - - * share/po/pl.po: Mostly finished polish translation - translations, fixes etc... - -2002/04/16 alus - - * share/po/pl.po: still working - Few fixes - Updated translation. Many strings is not yet translated... - -2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: only main version of automake - -2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated po file - -2002/04/16 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server - dialog box - -2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: ipchains now conflicts with iptables - -2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: Another small fix - Small corrections - -2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ro.po: merged with drakfloppy strings - -2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/mt.po: updated Maltese file - -2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: small typo correction - -2002/04/10 warly - - * share/rpmsrate: autofs -> 2 - -2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains - and iptables - packages conflict - -2002/04/09 Pixel <pixel@mandrakesoft.com> - - * partition_table_dos.pm, partition_table_gpt.pm, - partition_table_empty.pm, partition_table_bsd.pm, - partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic" - error message (thanks to Brian J. Murrell) - -2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fixed a bunch of things - - * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm, - partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm, - printerdrake.pm, network/tools.pm, diskdrake/interactive.pm, - network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm, - network/network.pm, printer.pm, interactive_stdio.pm: fix a few english - strings - -2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with - drakfloppy strings - -2002/04/07 Yves Duret <yduret@mandrakesoft.com> - - * standalone/drakfloppy: moving from his own rpm to drakxtools - - * Makefile.config: add drakfloppy to STANDALONEPMS_ - -2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt - -2002/04/04 sdupont - - * standalone/drakbackup: please yduret, do not commit these changes on cvs - before to test it. - you can say "bugs fixes" only if you have corrected some errors but not - if you create it! - the backup on cd was disabled because the backend is not available for - moment. - - * standalone/drakfont: remove uninteresting yduret changes, - would it be possible to know what are your "bugs fixies" ? - to yduret: I'm the creator of this program so please do not remove my - changes. - -2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt - -2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt - -2002/04/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which - doesn't use $ENV{SECURE_LEVEL} anymore - -2002/04/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which - doesn't use $ENV{SECURE_LEVEL} anymore - -2002/04/02 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: do not have "root=" with no root (needed for memtest) - (thanks to Borsenkow Andrej) - - * share/rpmsrate: add tmpwatch (since it is not mandatory any more) - -2002/03/30 Yves Duret <yduret@mandrakesoft.com> - - * standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up, - more mdkish.. - -2002/03/26 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Fixed several problems related to HP - multi-function devices: - - Parallel multi-function devices worked only on the first (onboard) - parallel - port. - - HP LaserJet 2200 needs HPOJ for printing via USB. - - For the HP OfficeJet D series the scanning instructions were not - shown. - - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx. - -2002/03/22 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: cleaned gtkpowerpack - -2002/03/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: use /root rather than /tmp for some temp files (security - suxx) - -2002/03/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/list: rpm 4.0.4 - - * mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void - -2002/03/20 sdupont - - * standalone/drakfont: fixing problems - exchanging: ttmkfdir by /usr/X11R6/bin/mkttfdir - which generate correct fonts.dir - - * standalone/drakbackup: remove backup on cd - -2002/03/20 Thierry Vignaud <tvignaud@mandrakesoft.com - - * standalone/drakxtv: use log for what is not related to explanations - -2002/03/19 François Pons <fpons@mandrakesoft.com> - - * tools/updatehdlist: take care of commercial medium (not syncable). - -2002/03/19 Thierry Vignaud <tvignaud@mandrakesoft.com - - * standalone/drakxtv: - - default tv norm is pal rather than ntsc (because of alphabetical - sort) since it's the most used tv norm - - figure out tv norm & country (aka frequency table) from locales - - - add a hash based on lang in order to do this - - - add --no-guess if one doesn't want drakxtv to automagically guess tv - norm and geographic area through locales (lang.pm) - - - log with standalone::explanations: - - - guessed values from locales: language, tv norm and country - - - runned command to scan for tv channels - - - ~/.xawtv creation - - - - s/bcast/broadcast/ in displayed messages - - - add -h and --help support - -2002/03/18 dam's <damien@mandrakesoft.com> - - * install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API - -2002/03/18 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: fixed to support rpm filename incoherent to standard - naming for commercial - packages (commercial are *really* shit (almost, for the hope) all the - time ?) - -2002/03/16 dam's <damien@mandrakesoft.com> - - * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet - connection. - -2002/03/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/ar.po: updated po file - -2002/03/16 Pixel <pixel@mandrakesoft.com> - - * network/ethernet.pm: small cleanup on untested code (need testing:) - -2002/03/16 dam's <damien@mandrakesoft.com> - - * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet - connection. - -2002/03/16 Pixel <pixel@mandrakesoft.com> - - * network/ethernet.pm: small cleanup on untested code (need testing:) - -2002/03/15 fabman - - * share/po/es.po: updated bad lilo/grub/yaboot translation - updated spanish translations - -2002/03/15 François Pons <fpons@mandrakesoft.com> - - * bootloader.pm: force mkinitrd *really* for bootsplash. - force initrd regeneration for oem on some case (maybe the cause of - bootsplash - perturbation, as maintainer don't even known why it is running correctly - :-) - - * pkgs.pm: do not try to get synthesis if hdlist is available as an handle - on file (typical - for updates). - - * share/rpmsrate: remove doublon on NVIDIA_nforce. - update to 6mdk for NVIDIA_nforce* - -2002/03/15 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: yet again add some dropped entities from drakx-help.xml - add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux; - - * install_steps_interactive.pm: - - remove obsolete code - - the result is to use directly $availableC instead $size2install - which was min($availableC, $max_size) - -2002/03/15 dam's <damien@mandrakesoft.com> - - * share/po/ja.po: reverted ' \n' from pablo because I managed to correct - the way we wrap for the advertising - - * install_steps_gtk.pm: submitting widget instead of style (style/font - initialization bug from gtk - - * my_gtk.pm: corrected get_text_coord : widget instead of style, and - handling of ugly language (/ja|zh/) - -2002/03/15 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: do not try to get synthesis if hdlist is available as an handle - on file (typical - for updates). - - * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove - @euro appended for 8.1). - -2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard - ones - -2002/03/15 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: yet again add some dropped entities from drakx-help.xml - add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux; - s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged) - - * keyboard.pm (unpack_keyboards): return undef on error - -2002/03/15 dam's <damien@mandrakesoft.com> - - * share/po/ja.po: reverted ' \n' from pablo because I managed to correct - the way we wrap for the advertising - - * install_steps_gtk.pm: submitting widget instead of style (style/font - initialization bug from gtk - - * my_gtk.pm: corrected get_text_coord : widget instead of style, and - handling of ugly language (/ja|zh/) - -2002/03/15 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove - @euro appended for 8.1). - -2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard - ones - -2002/03/15 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the - drakx-help.xml not merged) - - * keyboard.pm (unpack_keyboards): return undef on error - -2002/03/15 dam's <damien@mandrakesoft.com> - - * share/po/ja.po: reverted ' \n' from pablo because I managed to correct - the way we wrap for the advertising - - * install_steps_gtk.pm: submitting widget instead of style (style/font - initialization bug from gtk - - * my_gtk.pm: corrected get_text_coord : widget instead of style, and - handling of ugly language (/ja|zh/) - -2002/03/15 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove - @euro appended for 8.1). - -2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard - ones - -2002/03/15 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the - drakx-help.xml not merged) - - * keyboard.pm (unpack_keyboards): return undef on error - -2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po: updated po file - -2002/03/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakxtv: english - -2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/da.po, share/po/no.po: updated po files - - * share/po/eu.po: updated po file - - * lang.pm: changed LANGUAGE for basque - - * share/po/ja.po: added \n in advertising - -2002/03/14 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good - for english which has CHARSET"C", adding it - - * share/rpmsrate.server: obsolete - -2002/03/14 Thierry Vignaud <tvignaud@mandrakesoft.com - - * standalone/drakxtv: - - add SECAM to france description to ease user comprehension - - remove unused variables - - revert gc & dam's (also known as the usual suckers) garbage - who'ven't the hardware to test: - - - explain in source why we don't try to install xawtv (see below) - - - just display a message if xawtv isn't installed - since drakx should have installed it - - - let it be runned as root again (how many times i'm - supposed to restore this behaviour) - - - retest with a tv card - - - use %ENV rather than relying on shell ~ expansion - - - if tv card wasn't detected, ask the user to spam us - - - factorize $in->exit() out of scan4tvchannels() - - - add to TODO list the possibility to install xawtv if needed - - - check scantv return value and display an error message - - - also if the wrapper was runned on console, display a nice - message saying one can now run xawtv under X11 - -2002/03/14 warly - - * share/rpmsrate: add commercial apps - -2002/03/14 Yves Duret <yduret@mandrakesoft.com> - - * standalone/logdrake: fix some bug - fix * bug in field matching/ not matching - -2002/03/13 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: new gfx - -2002/03/13 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: sync with oem (removed mach32 server). - sync with oem. - remove bzflag. - synced with oem script. - - * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too. - remove Mach8 and Mono driver for oem only. - remove bzflag. - fixed closure selection on sub groups (like 3D), - moved some big package out of oem, - minor fixes. - -2002/03/13 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: new gfx - -2002/03/13 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: sync with oem (removed mach32 server). - sync with oem. - remove bzflag. - synced with oem script. - - * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too. - remove Mach8 and Mono driver for oem only. - remove bzflag. - fixed closure selection on sub groups (like 3D), - moved some big package out of oem, - minor fixes. - -2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po, share/po/eu.po: updated po files - -2002/03/13 warly - - * share/rpmsrate: add aspell-fr and en for gabber require - -2002/03/13 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D), - moved some big package out of oem, - minor fixes. - - * tools/oem-prepare: synced with oem script. - -2002/03/13 gbeauchesne - - * share/rpmsrate: - - Add openoffice with weight = 2 - -2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po, - share/po/eu.po: updated po files - - * lang.pm: small console font changes - set default console fotns for latin1/0 to lat1-16 and lat0-16; - the font lat0-sun16 is missing some chars of iso-8859-1/15 ! - -2002/03/13 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm: add gcc and gcc-c++ in @preferred - -2002/03/13 warly - - * share/rpmsrate: add aspell-fr and en for gabber require - -2002/03/12 dam's <damien@mandrakesoft.com> - - * network/network.pm: onboot option only in expert mode - corrected domainname bug; added onboot option - -2002/03/12 dam's <damien@mandrakesoft.com> - - * standalone/drakbackup, standalone/drakfont: minor bug correction - - * standalone/net_monitor: greater timeout - - * network/tools.pm, network/netconnect.pm: changed timeout for testing - internet connection - -2002/03/12 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: remove synthesis if not found (filesize is 0) - - * Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!) - - * install_any.pm: added fix to support update hdlist renaming (ie hdlist - of update are always hdlist.cz). - remove old synthesis file, to make sure gzip can build a new one. - - * share/rpmsrate: added nforce support (hack by adding kernel version - inside) - -2002/03/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - - * share/po/ga.po: fixed email address - - * share/po/zh_TW.po: updated po file - -2002/03/12 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, bootloader.pm: don't have "quiet" boot in the server - meta_class - - * pkgs.pm: "fam" is not a naughtyServers - remove the old "boa" comment - adapt naughtyServers for 8.2 - -2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: a few missing translations - -2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po, - share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po, - share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated - po files - - * share/po/eu.po, share/po/it.po: updated po files - merged with new strings from manuals - - * share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals - - * share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po, - share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po, - share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po, - share/po/cs.po, share/po/af.po: updated po files (finished merging with - manual strings) - updated po files - - * share/po/hu.po: updated po files - updated po files - - * share/po/cy.po: updated po file - updated po files - - * share/po/es.po: updated Spanish - - * share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po, - share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po, - share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, - share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging - with manual strings) - -2002/03/11 dam's <damien@mandrakesoft.com> - - * Makefile.config: added drakproxy - - * standalone/drakxtv: added embedded mode - -2002/03/11 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: for updates, make tree as flat instead in order to - see all packages. - -2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: webmin: 3 - - * standalone/drakxtv: - - install xawtv when necessary instead of - telling people to use urpmi (titi sucks) - - prints out a message when no tv card - has been detected - - * share/po/fr.po: small ortograf - -2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings - from manuals - - * share/po/DrakX.pot: merged with new strings from manuals - updated GErman file - - * share/po/de.po: updated GErman file - - * share/po/es.po: updated Spanish - -2002/03/11 Pixel <pixel@mandrakesoft.com> - - * mouse.pm (fullname2mouse): workaround when "1 Button" is not found - - * install_steps.pm, install2.pm: - - default security level now set in miscellaneousBefore - - default security level is 3 in meta_class server - - * install_any.pm: - - fix the setting of compssUsersChoices in auto_install when it is - empty - - set the default compssUsersChoices adapted to the server meta_class - - * share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice, - the rate is 4, and it requires apache, and ...) - - * Makefile: upload the various compssUsers* (esp. compssUsers.server) - - * install_steps_gtk.pm: - - remove the hack for not displaying Utilities in classic meta_class - - new compssUsers groups for the server meta_class - - * share/compssUsers: remove "Utilities" here instead of removing it - hackily in install_steps_gtk - - * share/compssUsers.server: fix the path=Utilities for the Utilities - section - -2002/03/11 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Small text fix. - Security fix: Give a warning that SMB passwords can easily be revealed - by normal users when printing on a Windows-hosted printer is set up. - - * detect_devices.pm: Reverted parts of the last change, they broke in - non-DevFS environments (e. g. during installation). - -2002/03/11 warly - - * share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server - - * share/compssUsers.server: remove ICEWM choice - -2002/03/11 Yves Duret <yduret@mandrakesoft.com> - - * tools/cvslog2changelog.pl: added yduret entry in user. - -2002/03/11 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad - card for XF3) (gégé report). - -2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help file - - * share/po/de.po, share/po/DrakX.pot: updated GErman file - -2002/03/11 Pixel <pixel@mandrakesoft.com> - - * diskdrake/interactive.pm (Mount_point): when files exist in the chosen - mount point, propose migration - - * install_steps_interactive.pm: search /commercial/i instead of - /Application/ before showing the commercial license - - * standalone/drakboot, bootloader.pm: fix Stew sucks - - * install2.pm, install_steps.pm: - - default security level now set in miscellaneousBefore - - default security level is 3 in meta_class server - - * install_steps_gtk.pm: - - remove the hack for not displaying Utilities in classic meta_class - - new compssUsers groups for the server meta_class - search /commercial/i instead of /Application/ before showing the - commercial license - - * install_any.pm: - - fix the setting of compssUsersChoices in auto_install when it is - empty - - set the default compssUsersChoices adapted to the server meta_class - - * Makefile: upload the various compssUsers* (esp. compssUsers.server) - - * share/compssUsers: remove "Utilities" here instead of removing it - hackily in install_steps_gtk - - * share/compssUsers.server: fix the path=Utilities for the Utilities - section - -2002/03/11 yduret - - * standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check - line. - -2002/03/10 chipaux - - * share/po/fr.po: Corrected few typo mistakes. - -2002/03/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps.pm: gcize damienization - - * share/rpmsrate: put userdrake together with drakconf so that - userdrake is not missing (till) - -2002/03/10 siegel - - * share/po/help_xml2pm.pl: added tag filename - - * any.pm: added missing i18n _() - - * share/po/de.po: update - and still fixes ... - updates - update - -2002/03/10 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Protect the Star Office/OpenOffice.org configuration against - manual changing of the "update-alternatives" assignment of the "lpr" - command. - - * detect_devices.pm: Made USB printer auto-detection more stable and - reliable. - -2002/03/10 yduret - - * standalone/scannerdrake: added ASK DEVICE support - - * scanner.pm: added ASK support for more interactiveness during - configuration - -2002/03/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c: comply better to ClientID stuff - -2002/03/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po: updated po file - -2002/03/09 yduret - - * standalone/scannerdrake: added sum up at the end - uncomment line that checks if sane rpm is installed or not (thx gc). - i sux, - -2002/03/08 dam's <damien@mandrakesoft.com> - - * standalone/drakproxy: drakproxy rewritten - working drakproxy - - * install_steps.pm: corrected network up/down when network install - - * standalone/drakfont: ergonomy changed to fit in mcc - corrected network up/down when network install - - * network/network.pm: proxy settings corrected - -2002/03/08 fabman - - * share/po/es.po: updated spanish translation - -2002/03/08 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming - conventions. - - * standalone/XFdrake: fixed NVIDIA support to use newer kernel naming - conventions. - - * Xconfigurator.pm: fixed possible additional XFree packages not installed - if server is already - installed. - -2002/03/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: missing translations + a few changes - - * mdk-stage1/probing.c: have 4 seconds of delay for usb stuff - to show up rather than seconds - -2002/03/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po, share/po/it.po: updated po files - - * share/po/es.po: corrected typo - - * share/po/da.po: updated Danish file - - * lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in - locales-skeleton so non primary chinese encodings - can work - - * share/po/ar.po: updated po file - - * share/po/cy.po: removed the "translation" of licence, it was random - text. - -2002/03/07 dam's <damien@mandrakesoft.com> - - * share/po/fr.po, modparm.pm: corrected - -2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/newt-frontend.c: english fix thx to till & phil - -2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po: updated po file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, - share/po/af.po: updated pot file - -2002/03/07 Pixel <pixel@mandrakesoft.com> - - * fs.pm: removing quota choices for reiserfs - -2002/03/07 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: make gc happy - - * modparm.pm, share/po/fr.po: corrected - - * standalone/draknet: corrected network/internet restart when already - connected - - * network/netconnect.pm: corrected bad previous behaviour - - * standalone/drakfont: corrected bad system command - - * share/advertising/02-internet_icon.png, - share/advertising/05-contcenter_icon.png, - share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl, - share/advertising/08-games.pl, share/advertising/02-internet.pl, - share/advertising/03-graphic_icon.png, share/advertising/07-server.pl, - share/advertising/12-MDKstore_icon.png, - share/advertising/06-user_icon.png, - share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl, - share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl, - share/advertising/04-develop.pl, - share/advertising/09-MDKcampus_icon.png, - share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl, - share/advertising/04-develop_icon.png, - share/advertising/08-games_icon.png: changed icon sizes - -2002/03/07 fcrozat - - * share/rpmsrate: Evolution is not dependent on GNOME selection (not - require gnome-core) - -2002/03/07 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: avoid destroying some files in /etc. - - * install_steps_interactive.pm: fixed package tree with a given medium. - - * any.pm: fix autologin sometimes activated without user intervention. - -2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: generate_automatic_stage1_params: also save - the interface number in case the machine will - have several interfaces; clean code a bit - - * mdk-stage1/network.c: better error msg regarding pcmcia net - adapters supported either with pcmcia.img - or network.img (amaury sucks) - - * install_steps_auto_install.pm: in replay mode, since - $o->{interactiveSteps} - exists, we can't simply ||= @graphical_steps, - we need to push to ensure that the - @graphical_steps is always honoured - - * standalone/drakgw: - - call net_monitor to disable internet - connection before network-restart - - user return value when status'ing the - initscripts rather than grepping their - text output - - * modules.pm: try to avoid segfaulting probeall stuff - add ns83820 gigabit (goes to other.img) - - * rescue/rescue-doc: english fixes thx to phil - -2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * standalone/drakfont: Added a missing _( ) around a text - - * share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated - po files - - * share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the - translations using argument switching (not yet handled by DrakX) - - * bootlook.pm, standalone/drakboot: i18n changes - - * keyboard.pm: corrected the locale->keyboard list building - make keyboard selection choose first the 5 first chars of lang; - then the 2 first chars; - - * share/po/eu.po: commented out the translations using argument switching - (not yet handled by DrakX) - updated po file - -2002/03/07 Pixel <pixel@mandrakesoft.com> - - * any.pm: fix fileshare custom config - fix *some* stew errors - - * bootloader.pm: "--timeout=" must be after terminal - add --timeout=... for "terminal serial ..." line in grub's menu.lst - fix *some* stew errors - - * install_any.pm: don't have the adsl & modem passwords in report.bug - - * detect_devices.pm (zips__faking_ide_scsi): fix returned value in - standalone - (getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel - error when there is no floppy) - - * fs.pm: removing quota choices for reiserfs - -2002/03/07 Stew Benedict <sbenedict@mandrakesoft.com> - - * any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot - functionality for PPC - -2002/03/07 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed bug of network not being started by Printerdrake - during installation. - -2002/03/07 warly - - * share/compssUsers.server, share/compssUsers, share/rpmsrate: update - server, merge with normal rpmsrate - -2002/03/06 dam's <damien@mandrakesoft.com> - - * standalone/drakautoinst: corrected HASH and ARRAY label - -2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file - -2002/03/06 Pixel <pixel@mandrakesoft.com> - - * standalone/fileshareset (nfs_exports::update_server): ensure portmap is - running - -2002/03/06 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: corrected font stuff - - * standalone/drakautoinst: corrected HASH and ARRAY label - -2002/03/06 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB. - - * pkgs.pm: fixed error when using multiple removable media and user - aborted installation - (for some other error) and hdlists cannot be retrieved. - add save of synthesis too when partitions are reformated, so that urpmi - is happy after. - fixed when hdlist gives no new package (new name) but only obsoleted - package or - updated package, ie security updates may appreciate. - - * install_any.pm: update for newer pkgs module (fix for abort during - installation). - - * rescue/tree/etc/oem: allow oem script to be executable from standard cd - set (powerpack or other). - -2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po: updated po file - updated pot file - - * share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po: - updated pot file - updated some po files - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - -2002/03/06 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm: add @preferred libxpm4 - - * lang.pm: fix typo in %xim (for chineese) - - create the kde share/config's directory, so that kde config files - are created in any case - - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken - into account when ~/.i18n doesn't exist (thanks to F.Crozat) - - * install_any.pm: ensure the fstab is kept on upgrade - (g_auto_install): use "interactiveSteps" field instead of pushing in - @install_steps_auto_install::graphical_steps - - * standalone/localedrake: when called by kcontrol with --apply, don't - modify kde config files, kcontrol takes care of it more nicely - - * diskdrake/interactive.pm: translate the actions - choose to activate crypto. type password. unselect encryption. Select - encryption again, you were not asked for password. Fixed - use formatError - - * bootloader.pm (add_append): don't add to entries of type 'other' - - * devices.pm (find_free_loop): fix - - * install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept - on upgrade - - * fsedit.pm: do not allow encrypted /var - -2002/03/06 Thierry Vignaud <tvignaud@mandrakesoft.com - - * standalone/drakxtv: print an error message if xawtv isn't installed - fix conflict between i18n and complete signal handler (ie return key - and not value) - -2002/03/06 warly - - * share/rpmsrate: remove abiword - -2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool - i82365 :-((, ugly patch - -2002/03/05 warly - - * share/rpmsrate: add Fred Bastok modif - remove too many duplicate in i18n packages that are now automatically - added - -2002/03/05 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * modules.pm: Add USB2 controller - -2002/03/05 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: corrected expert option in install mode - added expert mode - - * my_gtk.pm: greater interstice - - * modparm.pm: cosmetic - gzipped modules handled - -2002/03/05 fcrozat - - * share/rpmsrate: Install xlockmore when installing gnome, since - xscreensaver can't lock - root desktop.. - -2002/03/05 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128 - driver used. - - * install_steps.pm: added auto restore of some files (/etc/profile) needed - by upgrade (from .rpmnew). - added log for hasNetwork (so that we can understand why installUpdates - do nothing). - - * crypto.pm: avoid trying to find hdlist-updates.cz in existing medium - (instead of ftp one). - - * fs.pm: fixed hd install to allow using specific directory. - - * install_any.pm: fix duplicate synthesis.hdlist.xxx file present in - /var/lib/urpmi, and - furthermore uncompressed :-( - fixed possible bug when generating synthesis file for urpmi - installation. - -2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save - dhcp_hostname for stage2 - - * install_any.pm: fix bug in generating automatic stage1 - params for http - - * modules.pm: aironet core sucking thing - -2002/03/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sr.po, share/po/sp.po: updated po files - -2002/03/05 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: if mem=nopentium is given on cmdline, have it after - install - - * modules.pm (extract_modules): created (was done in load_raw) - -2002/03/05 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator.pm: use UseFBDev for r128 - PPC - -2002/03/05 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet - D series, HP LaserJet 33xx MFP. - Fixed bug of printerdrake sometimes assuming the user has an MF device - when he has typed the device file name in the expert mode. - -2002/03/05 yduret - - * bootlook.pm: fix nobody bug - - * standalone/logdrake: mail alert: use eval {} to catch wizcancel - -2002/03/04 dam's <damien@mandrakesoft.com> - - * modparm.pm: corected weirdness, I suck - -2002/03/04 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fix scroll total to match reality. - fixed interpretation of size of package when doing an install (this can - be - severe, need testing). - -2002/03/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cy.po, share/po/id.po: updated po file - -2002/03/03 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm (gtkicons_labels_widget): since style is not set either, use - the widget and ask it the style->font. This *works* - (gtkicons_labels_widget): pass the style instead of directly passing the - font - -2002/03/03 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug - in the PostScript produced by these programs so that the Euro symbol is - printed correctly. - -2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated po file - -2002/03/02 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm: better name for windobe new 0x42 special id (their - own LVM marker) - - * detect_devices.pm: better jaz detection (thanks to Randy Welch) - -2002/03/02 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org". - -2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated - po files - - * share/po/tr.po: updated po file - -2002/03/02 Pixel <pixel@mandrakesoft.com> - - * share/list: add lvreduce & lvextend - - * detect_devices.pm: fix ide zip name when there are already some other - SCSI drives - ZIPs and Jazz's are not floppies - - * diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and - adjust_* for normal partitions, even for destructive resizes - -2002/03/02 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org". - -2002/03/01 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: fix gc's bulshit - -2002/03/01 dam's <damien@mandrakesoft.com> - - * services.pm: corrected translation used for shell command - - * my_gtk.pm: style & font correction - -2002/03/01 François Pons <fpons@mandrakesoft.com> - - * share/rpmsrate: updated INSTALL category with NOCOPY new flag added. - - * rescue/tree/etc/oem: added ext3 support. - - * share/rpmsrate.server: synced with rpmsrate INSTALL category. - - * install_any.pm: reset correct setup_postinstall_rpms calling. - removed some card where 3D is not installed by default: - Riva128, Radeon 8500 and Rage Mobility card. - removed staling debug code. - fixed bad copied package (if one is not found). - - * tools/oem-prepare: added handling of newer rpmsrate format with INSTALL - category. - - * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY - handling. - only copy package in INSTALL category with a rate of at least 2. - -2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: a few missing trads - please translators, keep two newlines when - there are two newlines in original string, - it's on purpose - -2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, - share/po/af.po: updated po files - - * share/po/fr.po: fixed two typos - small corrections (non breakable spaces) - -2002/03/01 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=> - Xdrakres completly obsolete) - - * standalone/localedrake: restrict localedrake to installed lang - - * lang.pm: restrict localedrake to installed lang - add 'C' in %charset2kde_font (so that english has normal fonts) - - * bootloader.pm: - - do not indent "disk=... bios=..." - - $lilo->{first_hd_device} can be used to tell which drive is the - first one - for the BIOS. Useful when the bootloader is installed on a partition and - not - on the MBR. - read "disk=/dev/xxx bios=0x8x" and save it - - * any.pm: restrict localedrake to installed lang - ask which hard drive is the booting one when there is mixed kind of - drives - (scsi+ide, ide2+ide) and the bootloader is not installed on MBR - -2002/03/01 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Reduced the paths to search for Star/Open Office, on systems - without these applications installed the search needed a significant - time. - -2002/03/01 François Pons <fpons@mandrakesoft.com> - - * share/rpmsrate: updated INSTALL category with NOCOPY new flag added. - - * share/rpmsrate.server: synced with rpmsrate INSTALL category. - - * install_any.pm: removed staling debug code. - fixed bad copied package (if one is not found). - - * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY - handling. - only copy package in INSTALL category with a rate of at least 2. - -2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation, - thx to david@eastcott.net - - * share/po/fr.po: please translators, keep two newlines when - there are two newlines in original string, - it's on purpose - -2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files - -2002/03/01 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=> - Xdrakres completly obsolete) - - * detect_devices.pm: add is_a_recent_computer() - - * any.pm: call dcop as user - - * lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts) - switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15 - - * bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it - - * mouse.pm: special case for non detected usb interface on a box with no - mouse. - we *must* find out if there really is no usb, otherwise the box may - not be accessible via the keyboard (if the keyboard is USB) - the only way to know this is to make a full pci probe - -2002/02/28 dam's <damien@mandrakesoft.com> - - * standalone/drakbackup: bugfixs - corrected translation for crontab - - * modparm.pm: corrected modinfo path for isa modules during install - -2002/02/28 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: try to fix if no chosen width has been found. - removed Radeon 8500 from DRI capable cards. - - * rescue/tree/etc/oem: added curl as a bonus for oem install (it will be - used by urpmi) - added a2ps as a bonus (it fetch tetex where oem limited disk usage do - not agree - a lot). - fixed bad copy of install packages. - - * tools/oem-prepare: added curl as a bonus for oem install (it will be - used by urpmi) - added a2ps as a bonus (it fetch tetex where oem limited disk usage do - not agree - a lot). - fixed bad copy of INSTALL packages. - -2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install2.pm: more precise msg when can't access kernel modules because - we still have many dumb people on cooker asking what's going on - - * install_steps_interactive.pm: small english fix - -2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/de.po, share/po/no.po: updated po files - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - - * share/po/sv.po: updated Swedish file - updated pot file - -2002/02/28 Pixel <pixel@mandrakesoft.com> - - * rescue/make_rescue_img: resolve conflicts for short keytable names (eg: - "no" could be either "no-dvorak" or "no-latin1") - - * keyboard.pm (loadkeys_files): ensure each file appear only once - -2002/02/28 siegel - - * share/po/de.po: and another part of updates - updates - -2002/02/28 Thierry Vignaud <tvignaud@mandrakesoft.com - - * share/po/fr.po: last translation but not least. - further updates - update french translation - -2002/02/28 dam's <damien@mandrakesoft.com> - - * share/themes-marble3d.rc: rechanged bg for camille - - * standalone/drakbackup: corrected translation for crontab - -2002/02/28 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed bad copy of install packages. - - * tools/oem-prepare: fixed bad copy of INSTALL packages. - - * Xconfigurator.pm: removed Radeon 8500 from DRI capable cards. - -2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are - so dumb - -2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/zh_TW.po: updated Chinese file - -2002/02/28 Pixel <pixel@mandrakesoft.com> - - * rescue/make_rescue_img: resolve conflicts for short keytable names (eg: - "no" could be either "no-dvorak" or "no-latin1") - - * keyboard.pm (loadkeys_files): ensure each file appear only once - - * bootloader.pm: add "nowarn" in lilo.conf - - * install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs - and for "diskdrake --nfs" - -2002/02/28 sdupont - - * standalone/drakfont: including 'su' mode on drakfont. - -2002/02/28 siegel - - * share/po/de.po: updated missing strings - -2002/02/28 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Re-activated function to specify a CUPS server in - another network and to switch to manual CUPS configuration. - - Fixes/Improvements on Star Office/Open Office support: - o When one switches the spooler, the entries of the printers under the - old spooler are removed from Star Office/Open Office - o Printers on remote CUPS servers (which are known through - broadcasting) - can be added to Star Office/Open Office - - * share/rpmsrate.server, share/rpmsrate: Added "curl" to install section, - it is needed by printerdrake. - - * printer.pm: - - Fixes/Improvements on Star Office/Open Office support: - o When one switches the spooler, the entries of the printers under the - old spooler are removed from Star Office/Open Office - o Printers on remote CUPS servers (which are known through - broadcasting) - can be added to Star Office/Open Office - -2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: updated Basque file - -2002/02/27 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: - - Improved fully automatic adding of printer queue: - o Ask for a queue name if more than one printer is detected - o Let user confirm the model automatically chosen from the database - o Set correct paper size according to the language/country - - When one chooses a "CUPS + GIMP-Print" driver now all important - options - are displayed directly (without needing "Advanced" button). - - Made less warning appearing on the console from where "printerdrake" - was - called. - -2002/02/27 fabman - - * share/po/es.po: converted to UTF-8 - -2002/02/27 François Pons <fpons@mandrakesoft.com> - - * crypto.pm: fix missing version listed when doing update. - -2002/02/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: a few translations - - * mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386, - rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue - - * install_steps_interactive.pm: formatAlaTex for congratz msg - xfs + bootdisk = warning_msg - - * share/rpmsrate: flightgear is now fully lowercase - glaxium - - * mdk-stage1/pcmcia_/probe.c: add Keld Jĝrn Simonsen <keld@dkuug.dk>'s O2 - Micro - CardBus controller, and two other PCI entries which - have close descriptions - - * mdk-stage1/pcmcia_/merge_from_pcitable: misc - also report when pcitable is "too old" - write a short perl program to easily merge new - cardbus controllers from pcitable into probe.c - -2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eu.po: updated po file - -2002/02/27 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: simplify pyDict - - * install_steps_interactive.pm: ensure a keyboard is only once available, - either in advanced or normal, but - not in both (tx2fredl) - - * share/po/da.po: - - it is UTF-8 - - fix line splitting - - * lang.pm: workaround iso-8859-1 charset based languages not displayed - correctly at install - - %lang2country is the authority, so if the country given by - %lang2country doesn't exist in KDE, return C - - fix be,sp,sr - - s/def/default/ (typo) - - add some utf kde fonts - -2002/02/27 Thierry Vignaud <tvignaud@mandrakesoft.com - - * share/po/fr.po: update french translation - - * standalone/drakxtv: - - simplify an ACTION||fallback;fallback into ACTION;fallback - - print a message saying that xawtv can be used now at the end of the - channels auto-probing in case of direct use from cl and not from - XawTV wrapper (from qa test) aka let the world be better :-) - - * share/po/br.po: minor update - update brezhoneg translation - -2002/02/26 dam's <damien@mandrakesoft.com> - - * modparm.pm: corrected bad sprintf - -2002/02/26 fabman - - * share/po/es.po: updated spanish translations - -2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: version 8.2 - -2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files - -2002/02/26 Pixel <pixel@mandrakesoft.com> - - * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm, - diskdrake/interactive.pm: propose some mount points for - removable/nfs/smb - - * install_steps_interactive.pm: if no sound card are detected AND the user - selected things needing a sound card, propose a special case for ISA - cards - - * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes - when asked for a ISA - sound card) - - * my_gtk.pm (@icon_paths): ease testing - -2002/02/26 siegel - - * share/po/de.po: updates - -2002/02/26 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: corrected ttf/TTF and xfs restart - - * share/logo-mandrake.png: new logo - -2002/02/26 fabman - - * share/po/es.po: updated spanish translations - -2002/02/26 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fix translation of test program. - -2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL) - - * share/po/fr.po: - - explain where to put nbsp spaces, explain - what's nbsp spaces, explain how to compose them - - add a few missing nbsp spaces - - translate a few more things - -2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, - share/po/af.po: updated pot file - - * any.pm: fixed English typo - -2002/02/26 Pixel <pixel@mandrakesoft.com> - - * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm, - diskdrake/interactive.pm: propose some mount points for - removable/nfs/smb - - * Xconfigurator.pm: make perl_checker happy - have "Ok More Show all" instead of "Ok Cancel Show all" - set the locale properly instead of setting the translated messages in - the script - - * any.pm: - - zips() now return devices ending with "4", raw_zips() is the old - zips() - - rdvd handling - - add .conf for /etc/devfs/conf.d/ files - (devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the - symlink in lib/dev-state - - * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes - when asked for a ISA - sound card) - add xine in VIDEO 4 - - * install_steps.pm: - - zips() now return devices ending with "4", raw_zips() is the old - zips() - - rdvd handling - - add .conf for /etc/devfs/conf.d/ files - don't add mem=nopentium anymore. kernel people says it's not needed and - bad - for performance. It also means any bug must be addressed to them - create /dev/dvd for DVDs - - * my_gtk.pm (@icon_paths): ease testing - - * lang.pm: create bindtextdomain which does only part of the load_mo job - - * install_steps_interactive.pm: if no sound card are detected AND the user - selected things needing a sound card, propose a special case for ISA - cards - - * detect_devices.pm: - - zips() now return devices ending with "4", raw_zips() is the old - zips() - - rdvd handling - - add .conf for /etc/devfs/conf.d/ files - cleanup - - * fs.pm: - - zips() now return devices ending with "4", raw_zips() is the old - zips() - - rdvd handling - - add .conf for /etc/devfs/conf.d/ files - -2002/02/26 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than - 1152x864 - -2002/02/26 Thierry Vignaud <tvignaud@mandrakesoft.com - - * standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only - we support rxvt - and xterm but konsole too. - the only one missing is gnome-terminal which has -t but not -T - update comments - - remove useless "no_edit => 1" - - use interactive_gtk to determine if we're runned under X11 (ie - authorized acces to X11 server, X11 context, ...) - - add a note to remember that we should add a method to detect if we - run under X11 if/when we implement interactive_qt - - simplify code : - * remove is_tv and simplify its code to be a one-liner (replace a - foreach by a scalar context) - * use format to prevent reverse lookup on scantv run thus - enabling to reverse the initial hash table - - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real - hw. - -2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated po file - -2002/02/26 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: remove passwords and realnames from report.bug - -2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated po file - -2002/02/26 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: remove passwords and realnames from report.bug - -2002/02/25 dam's <damien@mandrakesoft.com> - - * any.pm, modparm.pm: corrected modules parameters functions - - * standalone/drakfont: debug - -2002/02/25 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or - nasty pixel displayed using syslinux-1.67-3mdk - -2002/02/25 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: don't put accents for bootloader, we can just use 7bit - chars - (titi sucks bigtime) - add a few nbsp spaces - - * rescue/list: add mt-st DAT stuff for joeghi (ghibo) - -2002/02/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2002/02/25 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: ignore-table is a global flag, so put it there (when - needed) - - * standalone/drakboot: add --testing - - * modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for - ide zips - - * install_steps_interactive.pm: sort the list of keyboards - -2002/02/25 Thierry Vignaud <tvignaud@mandrakesoft.com - - * share/po/fr.po: fix a typo (thanks gc) - -2002/02/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po, - share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po, - share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po, - share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po, - share/po/eu.po: updated some po files - -2002/02/24 Pixel <pixel@mandrakesoft.com> - - * share/keyboards.tar.bz2: fix permission - -2002/02/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cy.po, share/po/Makefile: updated Welsh file - - * share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po, - share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file - - * install_steps_interactive.pm: removed useless _( ) around a string - displayed in English only - - * share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po, - share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po, - share/po/af.po: updated some po files - -2002/02/23 Pixel <pixel@mandrakesoft.com> - - * interactive_newt.pm: - - use simplify_string to ensure multi-line and too long strings are - not used - (hacky, but no other solution) - - set $::setstep like interactive_gtk is doing (??) - - * partition_table_empty.pm: handle MBR containing the same character (0 or - "l") - - * diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a - nicer newt version) - - * devices.pm (devices::make): following a good advice from Andrej - Borsenkow, return the - file even if the device file doesn't exist the caller will fail or not. - The - advantage is better compatibility than raising an exception - devices::make doesn't mknod with devfs - - * detect_devices.pm: no need to catch the exception from devices::make - anymore - devices::make doesn't mknod with devfs - - * fs.pm: nicer error message when mount fails - - * share/rpmsrate: adding gphoto2 - - * install_steps_interactive.pm: when passwords do not match, focus on - first password entry, not the second (thanks to garrick) - - * Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since - it's already handled in Xconfigurator.pm - - * my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps - (thanks to garrick) - - * modules.pm: remove "-f" option for insmod - -2002/02/23 siegel - - * share/po/de.po: fixed silly error - updates - -2002/02/23 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Added automatic configuration of printers - in Star Office and Open Office. - -2002/02/22 dam's <damien@mandrakesoft.com> - - * share/advertising/02-internet.pl, share/advertising/07-server.pl, - share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl, - share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl, - share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl, - share/advertising/04-develop.pl, share/advertising/05-contcenter.pl, - share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl, - share/advertising/08-games.pl: corrected advertising text - - * share/po/fr.po: corrected bad translation - - * my_gtk.pm: corrected icon paths - -2002/02/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: exit the pur_gtk version after launching the wizard - version - - * any.pm: better rephrasing - change name and description of security levels - - * share/rpmsrate: powermanga: 2 -> 3 - -2002/02/22 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po, share/po/DrakX.pot: updated Danish file - - * lang.pm: start of support of kde fonts - fixed some keyboard names - - * keyboard.pm: fixed some keyboard names - added the two ?win_toggle choices - some info useful for keyboard handling - - * share/keyboards.tar.bz2: fixed some keyboard names - - * share/po/hu.po: updated hungarian file - -2002/02/22 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm: even smarted process to kill selection - - * lang.pm: fix 2 entries in charset2kde_font - - remove non needed entries in lang2country - - fix syntax errors - - rename kdefont in charset2kde_font - - much cleanup - use invalid instead of unknown for errors when checking - put back the less deep langs - have the tree less deep (esp. nicer when not displaying UTF-8 entries) - not translating in console installs (esp. newt) when the font is missing - restrict the langs displayed to non utf8 during install - fix warning message - disable perl warnings when checking - make perl_checker happy - - * devices.pm: add atibm (thanks to Robin Pollard) - - * bootloader.pm: put ignore-table to disable lilo's partition table - checking - (esp. the checking of the CHS geometry vs linear geometry) - - * Xconfigurator_consts.pm: fix syntax typo - - * Makefile: - - exclude urpm from perl_checker - - add checking keyboard.pm - - * install_steps_interactive.pm, install2.pm, install_steps.pm: not - translating in console installs (esp. newt) when the font is missing - - * keyboard.pm: use invalid instead of unknown for errors when checking - change the message - disable perl warnings when checking - - add checks for the various data structures - - fix another typo for usb2drakxkbd - fix typo - - * share/rpmsrate: add procmail in SYSTEM 4 - add samba-doc samba-winbind samba-swat - - * Xconfigurator.pm: workaround set_active failing - - * any.pm: use the setupBootloader help instead of setupBootloaderGeneral - restrict the langs displayed to non utf8 during install - -2002/02/22 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * standalone/drakxtv: update TODO list; - explain what is HRC - - * share/po/fr.po: further translations - update french translation - -2002/02/21 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: corrected icon list - -2002/02/21 fabman - - * share/po/es.po: updated spanish po file - -2002/02/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: spacecup no more exists - armagetron is nice, no use to install gltron as well - autoconf2.5 and automake1.5 - - * interactive.pm: when not in X and needs su, use consolehelper now - use consolehelper when no "kdeinit: kwin" process - is running - -2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/02/21 Pixel <pixel@mandrakesoft.com> - - * lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed - at the same time - - * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are - getFile'd (cuz they are big, causing the .cz2 to be *big*) - - * share/rpmsrate: add kinput2-wnn4 - -2002/02/21 siegel - - * share/po/de.po: update - -2002/02/21 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Removed "Manual configuration" button when "Local - Printer" dialog is started from the queue modification menu (Recommended - mode). - Improved matching of printer names resulting from auto-detection with - names in the database. - -2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/fr.po: final batch of typos fixes (next time, please run a - check speller) - fix more typos - update french translation; - fix typos - - * diskdrake/interactive.pm: shorter displayed message - -2002/02/21 dam's <damien@mandrakesoft.com> - - * standalone/draknet: changed button label - - * standalone/icons/gmon.png, standalone/icons/categ.png, - standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png, - standalone/icons/net_c.png, standalone/icons/ic82-system-40.png, - standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png, - standalone/icons/ic82-back-up-16.png, - standalone/icons/wiz_scannerdrake.png, - standalone/icons/ic82-discdurwhat-40.png, - standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png, - standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png, - standalone/icons/hori.png, standalone/icons/wiz_draknet.png, - standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png, - standalone/icons/wiz_default_up.png, - standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png, - standalone/icons/ic82-systemeplus-40.png, - standalone/icons/ic82-back-up-48.png, - standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png, - standalone/icons/ic82-moreoption-40.png, - standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png, - standalone/icons/wiz_printerdrake.png, - standalone/icons/wiz_default_left.png, - standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png, - standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png, - standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png, - standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png, - standalone/icons/ic82-where-40.png: added new gfx only standalone - - * pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png, - pixmaps/ic82-system-40.png, pixmaps/net_c.png, - pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png, - pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png, - pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png, - pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png, - pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png, - pixmaps/gmon.png, pixmaps/drakbackup.540x57.png, - pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png, - pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png, - pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png, - pixmaps/wiz_draknet.png, pixmaps/net_d.png, - pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png, - pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png, - pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png, - pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png, - pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png, - pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png, - pixmaps/wiz_scannerdrake.png: removed gfx not used during install - -2002/02/21 François Pons <fpons@mandrakesoft.com> - - * crypto.pm: fixed another not seen 8.1 reference in label. - fixed 8.1 release hard coded. - -2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fi.po: updated pot file - updated Finnish file - - * help.pm: updated help file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/02/21 Pixel <pixel@mandrakesoft.com> - - * share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc, - install_gtk.pm, share/themes/DarkMarble-button3_out.png, - share/themes.rc, share/themes/blueHeart-brown_bg1.png, - share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc, - share/themes/DarkMarble-check_on.png, - share/themes/blueHeart-button1.png, - share/themes/DarkMarble-check_off.png, - share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png, - share/themes/DarkMarble-button3_in_prelight.png, - share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and - blueHeart themes - - * bootloader.pm: have devfs=nomount for failsafe - - * Makefile.config, share/po/Makefile: make a difference between PMS and - ALLPMS. For install, only use PMS - - * lvm.pm: ensure lvm tools don't need to be all installed at the same time - - * Makefile: template.in stuff removed - make a difference between PMS and ALLPMS. For install, only use PMS - - * pkgs.pm: smarter choosing of processes to kill - - * tools/i386/netboot/make_boot_network: cleanup - - * modules.pm: add aic7xxx_old - - * install_any.pm: ensure lvm tools don't need to be all installed at the - same time - (remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs - DarkMarble theme is removed - (kdeicons_postinstall): remove this obsolete code - no special case for installing imwheel - - * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are - getFile'd (cuz they are big, causing the .cz2 to be *big*) - - * network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs - comment - -2002/02/21 siegel - - * share/po/de.po: update - snapshot - -2002/02/21 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added "type => 'list'" to the printer modification - menu, it appeared as a drop-down list during the installation. - -2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * standalone/drakxtv: more translatable strings; - hide scantv output on console; - check that we're under X11 before running scantv in an xterm - -2002/02/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/doc/UPDATEMODULES: add an example on modules with options - first line comment no more necessary - s/row/column/, silly me - - * standalone.pm: explanations stuff: no reason to use "updated" at a place - when we - use "modified" at the rest of the locations.. - -2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/es.po: updated Spanish file - updated Spanish file - -2002/02/20 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (ejectCdrom): display "files still open:" for all - processes when umounting fail - - * pkgs.pm: much simpler & stronger killing of still running processes - - * mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry - -2002/02/20 dam's <damien@mandrakesoft.com> - - * share/themes-marble3d.rc: updated theme - - * network/adsl.pm: mgmt install corrected - -2002/02/20 daouda - - * share/rpmsrate: - - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS - NETWORKING_REMOTE_ACCESS_SERVER - -2002/02/20 fcrozat - - * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla - -2002/02/20 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of - DrakX and newer method to select INSTALL packages. - - * standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using - urpm library instead of - parsing (now removed) depslist.ordered file. - - * Xconfigurator.pm: fixed default value if selecting a card (use previous - one or existing one). - added XFree 4 driver choice if Other|Unlisted is chosen. - fixed cancel on card selection so that previous choice is not lost. - - * Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for - listing XFree 4 drivers. - -2002/02/20 gbeauchesne - - * share/rpmsrate: - - Add gcc3.0-c++ and libstdc++3.0-devel - - Prefer gcc3.0-java over gcc-java - - Remove BasiliskII-sheepnet since it does no longer exist - - Add/prefer BasiliskII-jit over BasiliskII - -2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po: updated FRench file - - * share/po/es.po: updated Spanish file - updated Spanish file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po, - share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, - share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/02/20 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: fix s/SILO/LILO/ - - * fsedit.pm: have "with /usr" translated - - * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel" - button - - * steps.pm: move installUpdates after configureX (workaround for bad - timeouts during installing updates) - - * install_steps.pm, any.pm, standalone/draksec: factorize and update the - reading of previous security level - -2002/02/20 siegel - - * share/po/de.po: update - -2002/02/20 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/fr.po: update french translations - -2002/02/20 dam's <damien@mandrakesoft.com> - - * share/advertising/13-Nvert.pl: changed toll free - - * my_gtk.pm: added mcc kill if wait message - - * standalone/logdrake: cosmetic change, mcc compliance - -2002/02/20 daouda - - * share/rpmsrate: - - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS - NETWORKING_REMOTE_ACCESS_SERVER - -2002/02/20 fcrozat - - * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla - -2002/02/20 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying - file when changing cd (was an - limitation in read_rpmsrate when a package having a category and INSTALL - caused - INSTALL to be dropped). - -2002/02/20 gbeauchesne - - * share/rpmsrate: - - Add gcc3.0-c++ and libstdc++3.0-devel - - Prefer gcc3.0-java over gcc-java - - Remove BasiliskII-sheepnet since it does no longer exist - - Add/prefer BasiliskII-jit over BasiliskII - -2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved - English strings - - * share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and - Spanish files - -2002/02/20 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: remove fsck_option (obsolete) - - * share/po/fr.po: fix s/SILO/LILO/ - - * fsedit.pm: have "with /usr" translated - - * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel" - button - - * steps.pm: move installUpdates after configureX (workaround for bad - timeouts during installing updates) - - * install_steps.pm, any.pm, standalone/draksec: factorize and update the - reading of previous security level - -2002/02/20 siegel - - * share/po/de.po: snapshot - -2002/02/19 dam's <damien@mandrakesoft.com> - - * share/advertising/Makefile: new Makefile to install ads - -2002/02/19 fcrozat - - * share/rpmsrate: - -Install gnome-vfs-extras when installing nautilus (to get samba - browsing) - -don't install nautilus-mozilla, it is pulled by nautilus - -2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * any.pm: english fix - -2002/02/19 Pixel <pixel@mandrakesoft.com> - - * share/advertising/Makefile: advertising installation cleanup - - * diskdrake/smbnfs_gtk.pm: ugly hack to fix die - -2002/02/19 siegel - - * share/po/de.po: updates for beta 3 - -2002/02/19 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" - dialog. - -2002/02/19 dam's <damien@mandrakesoft.com> - - * share/advertising/Makefile: new Makefile to install ads - -2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add - $prefix in front of /var/* when missing - since we give "lilo.conf" in drakbug_report, let's also - give "menu.lst" - -2002/02/19 Pixel <pixel@mandrakesoft.com> - - * share/advertising/Makefile: advertising installation cleanup - -2002/02/19 siegel - - * share/po/de.po: updates for beta 3 - -2002/02/19 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" - dialog. - -2002/02/19 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: setting help - - * share/advertising/10-MDKexpert.png, share/advertising/07-server.png, - share/advertising/05-contcenter.png, share/advertising/03-graphic.png, - share/advertising/12-MDKstore_icon.png, - share/advertising/06-user_icon.png, - share/advertising/04-develop_icon.png, - share/advertising/12-MDKstore.png, share/advertising/00-thanks.png, - share/advertising/06-user.png, share/advertising/02-internet_icon.png, - share/advertising/04-develop.png, - share/advertising/05-contcenter_icon.png, - share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png, - share/advertising/11-consul.png, share/advertising/03-graphic_icon.png, - share/advertising/02-internet.png, share/advertising/07-server_icon.png, - share/advertising/01-gnu.png, share/advertising/08-games.png, - share/advertising/09-MDKcampus.png, - share/advertising/09-MDKcampus_icon.png, - share/advertising/08-games_icon.png: re-adding with -kb - removing for re-adding with -kb - added advertising for translation - - * share/advertising/essi.p: blah - added advertising for translation - - * my_gtk.pm: new icon handler - - * Makefile.config: addde share/advertising/*.pl for translation - - * share/advertising/Makefile: new Makefile to install ads - - * share/advertising/00-thanks.pl, share/advertising/06-user.pl, - share/advertising/08-games.pl, share/advertising/list, - share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl, - share/advertising/11-consul.pl, share/advertising/13-Nvert.pl, - share/advertising/02-internet.pl, share/advertising/07-server.pl, - share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl, - share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl, - share/advertising/03-graphic.pl: added advertising for translation - -2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add - $prefix in front of /var/* when missing - since we give "lilo.conf" in drakbug_report, let's also - give "menu.lst" - -2002/02/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files - -2002/02/19 Pixel <pixel@mandrakesoft.com> - - * share/advertising/Makefile: advertising installation cleanup - - * install2.pm: anchor the -IP match at the end of the string - move loading /tmp/network from stage1 before doing the auto_install - stuff to - allow the -IP feature on auto_install file name - - * share/rpmsrate: add grub in 4 SYSTEM - -2002/02/19 Till Kamppeter <till@mandrakesoft.com> - - * standalone/printerdrake, printer.pm: Assured that the default page size - is "Letter" for US/Canada and "A4" for the rest of the world. - The "Description" field of a printer queue is filled in with printer - manufacturer and model by default. - Removed unused varaiables in /usr/sbin/printerdrake. - - * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" - dialog. - Assured that the default page size is "Letter" for US/Canada and "A4" - for the rest of the world. - The "Description" field of a printer queue is filled in with printer - manufacturer and model by default. - Removed unused varaiables in /usr/sbin/printerdrake. - - * install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and - "Letter" so that Foomatic recognizes - the paper sizes. - Also use "Letter" paper for "en_CA" and "fr_CA" locales. - -2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: when no net device found, print a msg to tell - that now most pcmcia network adapters are supported - with network.img - -2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help file - - * share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po, - share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, - share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po, - share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po, - share/po/zh_TW.po, share/po/it.po: updated pot file - -2002/02/18 Pixel <pixel@mandrakesoft.com> - - * lang.pm, standalone/localedrake: - - handle --kde_lang with optionally --kde_country - - handle --apply - - * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class" - -2002/02/18 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: new gfx - -2002/02/18 fcrozat - - * share/rpmsrate: Install Guppi when installing gnumeric - -2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: titi sucks again - -2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sk.po: updated Slovak ile - updated pot file - - * help.pm: updated help file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: - updated pot file - -2002/02/18 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm: - - remove media_type cdrom-burner, use {capacity} instead - - use /proc/sys/dev/cdrom/info to fill in the {capacity} - - * diskdrake/smbnfs_gtk.pm: - - add Cancel - - move "click here" in "Search servers" on the right side - - remove Export - - fix bug - - * share/rpmsrate: raise xsane in SCANNER (Yves Duret) - raise mkisofs & cdrecord in BURNER - - * Xconfigurator.pm: workaround not having the right to connect to our new - created test server. - info about the pb (sorry for the french): - quand on lance le serveur - - via xdm/kdm/startx, ca utilise xauth, xhost est fermé - - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilisé - *sauf* si X/xinit est lancé à partir d'un X *et* .Xauthority est non - vide. - dans ce cas, xhost est fermé, et aucun xauth n'est ajouté - une conséquence, c'est que XFdrake ne peut pas accéder au X de - test si XFdrake est lancé sous X ou "xauth list" est non vide - exception: quand on lance le xdm/kdm en root, xhost n'est pas - fermé, - pas contre il est fermé en root & startx. - - * any.pm (fileshare_config): rework the custom message and launch - userdrake - (report_bug): add lilo.conf - - * standalone/localedrake: - - handle --kde_lang with optionally --kde_country - - handle --apply - change the message & ask wether to logout or not - - * lang.pm: - - handle --kde_lang with optionally --kde_country - - handle --apply - (lang2kde_lang): add missing valid_kde_langs - fuzzy language finding between available langs when it doesn't match - (useful for upgrades where fr_FR was fr_FR@euro) - - * diskdrake/interactive.pm: remove cdrom-burner from media_type set - - * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class" - - * fs.pm (mount_options_unpack): add usrquota and grpquota for - ext2/ext3/reiserfs/xfs - - remove media_type cdrom-burner, use {capacity} instead - - use /proc/sys/dev/cdrom/info to fill in the {capacity} - - * share/compssUsers: add EDITORS in Development/Development - add EDITORS in Development/Development - -2002/02/18 yduret - - * bootlook.pm: remove aurora part (commented for the moment) - - * standalone/scannerdrake: HP OfficeJet support - scsi/parport preliminary support - - * scanner.pm: update - scsi parport preliminary support - no more show unsupported scanner - common output for ScannerDB update from sane *.desc files and from - usbtable - -2002/02/17 Pixel <pixel@mandrakesoft.com> - - * diskdrake/interactive.pm: warn_if_renumbered now also done at install - -2002/02/17 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: have icewm-light in any case (to be used as a failsafe - window manager) - add hotplug, usbutils and usbview with the new flag USB - - * install_any.pm: hotplug now handled via rpmsrate and the USB flag - add some log to know why umounting /tmp/image fail - - * diskdrake/interactive.pm: warn_if_renumbered now also done at install - force scalar context for warp_text - - * share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to - remove entities - - * share/po/Makefile (clean): remove .memdump - - * any.pm (autologin): do not allow empty user name since no autologin can - already be achieved by choosing "No" - - * install2.pm: do not use run_program::xxx, use directly "system" so that - stdout is kept unchanged during "postInstall" execution - - * network/smb.pm: fix typo (s/nfs/smbfs/) - -2002/02/17 siegel - - * help.pm: new version for 8.2 - - * share/po/de.po: new german version - - * share/po/help_xml2pm.pl: added check for missing xsltproc - fix perl warnings after adding -w - - * share/po/.cvsignore: added .memdump - - * share/po/Makefile: allow me to work with a symlink to doc in this - directory - -2002/02/16 Pixel <pixel@mandrakesoft.com> - - * lvm.pm: - - LVs "device" field were containing "/dev/vg/number" whereas it must - be "vg/name" - - added lv_resize - - * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM - - * crypto.pm (mirrors): add a timeout via "alarm" (needs testing) - -2002/02/16 Pixel <pixel@mandrakesoft.com> - - * Xconfig.pm: - - prefer XKB available from existing XF86Config over - /etc/sysconfig/keyboard KEYTABLE - - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB - - * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM - - * interactive_newt.pm: do not trash error messages if testing - - * lang.pm (country2lang): created - (write): ensure it doesn't fail when kdeglobals is not writable (eg: the - directory doesn't exist) - (list): return the languages in a "specific" order (favours non utf8 - over utf8) - - * crypto.pm (mirrors): add a timeout via "alarm" (needs testing) - - * install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you - have any SCSI interfaces" instead - of assuming there is a SCSI interface and asking the driver name - - * lvm.pm: - - LVs "device" field were containing "/dev/vg/number" whereas it must - be "vg/name" - - added lv_resize - - call pvcreate with "-y -ff" - - created LVs are notFormatted - - * interactive.pm: - - fix non X + testing + su - - since "interactive" takes care of "format" for type "combo", remove - "format" (so that interactive_newt which switch to type "list" don't - apply - "format" once again) - - * standalone/localedrake: handle --kde_country=<country> - -2002/02/16 Pixel <pixel@mandrakesoft.com> - - * lang.pm (country2lang): created - (write): ensure it doesn't fail when kdeglobals is not writable (eg: the - directory doesn't exist) - (list): return the languages in a "specific" order (favours non utf8 - over utf8) - fix call to update_gnomekderc - - * standalone/localedrake: handle --kde_country=<country> - -2002/02/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - - * share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish - and Slovak files - -2002/02/16 Pixel <pixel@mandrakesoft.com> - - * lang.pm: fix call to update_gnomekderc - remove unused & unneeded special %lang2kde_lang - - add lang::check - - fix utf-ko -> utf_ko - - fix utf-14 -> utf_14 - - modify share/config/kdeglobals - - add charset2kde_charset, lang2country, lang2kde_lang - -2002/02/15 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: embedded mode correction - - * my_gtk.pm: highlight in gtk icon widget - - * share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png, - share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx - - * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, - share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm, - share/step-orange-on.xpm, share/step-green-on.xpm, - share/step-red-click.xpm: new gfx - new gfx - -2002/02/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po, - share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po, - share/po/eu.po: updated Basque file; fixed a msgid change - - * share/po/sv.po: updated Swedish file - updated Basque file; fixed a msgid change - -2002/02/15 Pixel <pixel@mandrakesoft.com> - - * run_program.pm: remove assigning STDIN to /dev/null since: - - programs should not use STDIN - - the "postInstall" script for auto_install's is more happy still - having the STDIN. - - * diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png, - pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png, - pixmaps/smbnfs_server.png: add icons showing if a mount-point is - associated or if the share is mounted - - * pkgs.pm: fix typo - - * diskdrake/interactive.pm: use the new warp_text - - * install_steps.pm: use lang::charset2kde_charset - - * standalone/localedrake: lang::write doesn't need the filename anymore - - * any.pm: use 'combo' instead of 'type' for bootloader choice and security - choice - (requested by fredb&dadou) - - * interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text - - * interactive.pm: favour "combo" over "list" in any case - - * Makefile (check): add lang::check checking - -2002/02/15 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/fr.po: update translation - -2002/02/14 Pixel <pixel@mandrakesoft.com> - - * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs - - * network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code, - with more code sharing - - * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text - feature - - * my_gtk.pm (ctree_set_icon): new function - - * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a - mount-point is associated are coming - - * standalone/diskdrake: fix expert and testing options handling - -2002/02/14 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: embedded mode - drakfont embedde mode - - * share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm, - share/step-orange-on.xpm, share/step-orange-click.xpm, - share/step-green-click.xpm, share/step-red-click.xpm, - share/step-green-on.xpm: new gfx - -2002/02/14 erwan - - * tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1, - tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub, - tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub, - tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2, - tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1, - tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub, - tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1, - tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub, - tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1, - tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub, - tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub, - tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1, - tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub, - tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub, - tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub, - tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1, - tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub, - tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2, - tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub, - tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub, - tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub, - tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub, - tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1, - tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub, - tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2, - tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1, - tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2, - tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub, - tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1, - tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1, - tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1, - tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2, - tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub, - tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub, - tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub, - tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub, - tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub, - tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub, - tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub, - tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2, - tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub, - tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1, - tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub, - tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub, - tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub, - tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub, - tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub, - tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub, - tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub, - tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New - version of grub (0.91) with allstage and pxegrub - - * tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1, - tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub, - tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub, - tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2: - Fixning some file missing in netboot - -2002/02/14 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed obsoletes management according to urpmi code. - -2002/02/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po, - share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from - CVS put a rule in Makefile to - don't use them (thanks Thierry) - updated some po files; removed the ones too lowly translated for the 8.2 - - * share/po/pt_BR.po: updted Brazilian file - updated some po files; removed the ones too lowly translated for the 8.2 - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po, - share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, - share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated some po files; removed the ones - too lowly translated for the 8.2 - - * share/po/vi.po: updated Vietnamese file - updated some po files; removed the ones too lowly translated for the 8.2 - - * share/po/Makefile: Instead of temporary removingfiles from CVS put a - rule in Makefile to - don't use them (thanks Thierry) - -2002/02/14 Pixel <pixel@mandrakesoft.com> - - * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs - - * network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code, - with more code sharing - - * interactive.pm: if testing, don't use kdesu - - * install_steps.pm: gzip report.bug - - * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text - feature - - * standalone/diskdrake: fix expert and testing options handling - - * my_gtk.pm (ctree_set_icon): new function - - * c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et - still needed :-( - #include iconv.h is needed even when C_RPM is undefined - - * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a - mount-point is associated are coming - -2002/02/14 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/br.po: update - convert to utf-8 - - * standalone/drakxtv: uses xawtv internal strings instead of frequencies - tables ids as values - in %freqtables in order to enhance drakxtv robustness when - translators'll - arrive. thus we'll pass right strings to scantv instead of translated - ones - explain how we manage the "all frequencies" case - display sorted tv norms - -2002/02/13 erwan - - * tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding - missing file on netboot - - * tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating - grub in netboot - -2002/02/13 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: avoid generating headers for copying file in - postinstall-rpm directory. - make sure not to crash if a package that should have been in CD1 is - somewhere - else. - fixed stupid typo. - removed all @needToCopy... variables and now use INSTALL category in - rpmsrate. - - * share/rpmsrate: updated INSTALL category with the merge of DrakX - obsoleted list (it will use - INSTALL now :-) - - * pkgs.pm: added extension to setSelectedFromCompssList. - - * share/rpmsrate.server: synced INSTALL category with standard rpmsrate. - -2002/02/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated Danish and Hungarian files - - * share/po/da.po: updated Danish file - updated Danish and Hungarian files - -2002/02/13 Pixel <pixel@mandrakesoft.com> - - * network/nfs.pm: $server->{ip} is no more mandatory - - * network/smb.pm: don't show shares ending with "$" - $server->{ip} is no more mandatory - - * any.pm (setupBootloader): switch from "list" to "combo" - - * fs.pm (fstab_to_string): unsetting mount points in standalone will now - work - - handle WORM type in /proc/scsi/scsi - - added media_type cdrom-burner - - adapting to new media_type - - nicer fd&hd testing - - * diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default - - * detect_devices.pm, diskdrake/interactive.pm: - - handle WORM type in /proc/scsi/scsi - - added media_type cdrom-burner - - adapting to new media_type - - nicer fd&hd testing - -2002/02/13 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: When one visited the help page of a remote CUPS printer - afterwards the full - printer modification menu was shown, not only the one for remote CUPS - printers. This is fixed now. - -2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files - - * share/po/cs.po: updated Czech file - updated Czech and Walloon files - -2002/02/12 Pixel <pixel@mandrakesoft.com> - - * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/ - -2002/02/12 Till Kamppeter <till@mandrakesoft.com> - - * detect_devices.pm: In the USB auto-detection checked whether and where - the device node was - created. - -2002/02/12 dam's <damien@mandrakesoft.com> - - * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, - share/themes/mdk-check_on.png, share/step-green-click.xpm, - share/step-green.xpm, share/step-red-click.xpm, - share/themes/mdk-check_off.png: new gfx - - * standalone/drakbackup, network/network.pm: bug correction - -2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated Hungarian file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/02/12 Pixel <pixel@mandrakesoft.com> - - * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/ - - * docs/README.pxe: cleanup the .cfg - - * share/rpmsrate: - - move bootsplash from SYSTEM to X - - lower Aurora - -2002/02/12 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed: - - Endless loop when entering printerdrake during installation in - recommended - mode without local printer - - Printerdrake was not closed when one was in the "Add Printer" - sequence - during installation and one clicked another installation item (entries - on left hand side) - - When configuring printing only after installation Printerdrake tried - to - check the installed queues without Foomatic being installed (bug was - already in 8.1, but noone discovered it). - - CUPS died when one tried to add a (local) printer in recommended - mode - after installation. - - Improved text for the dialog telling that no local printer was - detected. - - The list of auto-detected printers appeared as drop-down menu and - not as - a list. - - * detect_devices.pm: In the USB auto-detection checked whether and where - the device node was - created. - Fixes on device auto-detection: - - Made USB printer auto-detection routine in "detect_devices.pm" - creating - the appropriate device nodes (needed for USB printers being recognized - during installation). - - Fixed "devices.pm" to be able to handle device files with numbers - geater - than 9 (ex: /dev/usb/lp10). - - * standalone/printerdrake: - - Assure that Foomatic is installed before checking existing printer - queues. - - * devices.pm: Fixes on device auto-detection: - - Made USB printer auto-detection routine in "detect_devices.pm" - creating - the appropriate device nodes (needed for USB printers being recognized - during installation). - - Fixed "devices.pm" to be able to handle device files with numbers - geater - than 9 (ex: /dev/usb/lp10). - - * printer.pm: Added forgotten '$prefix'es. - Fixed: - - Endless loop when entering printerdrake during installation in - recommended - mode without local printer - - Printerdrake was not closed when one was in the "Add Printer" - sequence - during installation and one clicked another installation item (entries - on left hand side) - - When configuring printing only after installation Printerdrake tried - to - check the installed queues without Foomatic being installed (bug was - already in 8.1, but noone discovered it). - - CUPS died when one tried to add a (local) printer in recommended - mode - after installation. - - Improved text for the dialog telling that no local printer was - detected. - - The list of auto-detected printers appeared as drop-down menu and - not as - a list. - -2002/02/11 dam's <damien@mandrakesoft.com> - - * share/list: added modinfo - - * network/netconnect.pm: added cancel for first step - -2002/02/11 François Pons <fpons@mandrakesoft.com> - - * any.pm: fixed syntax error... - - * Xconfigurator.pm: avoid testing fbdev driver. - - * install_steps.pm: added Aurora or bootsplash for getting a need on frame - buffer. - added fbdev for GeForce Integrated. - -2002/02/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish, - Hungarian and Vietnamese files - -2002/02/11 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: booh, fpons was faster than me on "bootsplash wanting - fb". Keeping my solution ;p - - * c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM - is undefined - - * any.pm: allow to edit the initrd field (thx to randy.k.wilson) - - * install_any.pm (@needToCopy): add "ntp" - -2002/02/11 warly - - * share/rpmsrate: remove dev from INSTALL, the sun is rising, and there - are no more needs to have ppp in the INSTALL section, as the darkness is - going away... - -2002/02/10 Pixel <pixel@mandrakesoft.com> - - * any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to - expert - questions directly (it would need a semi_auto asking on which drive the - bios - boots...) - -2002/02/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated Dutch file - -2002/02/09 daouda - - * share/rpmsrate: - - add rfbdrake to NETWORKING_REMOTE_ACCESS and - NETWORKING_REMOTE_ACCESS_SERVER - -2002/02/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help.pm file - - * share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl, - share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po, - share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged - with the manual help - -2002/02/09 warly - - * share/rpmsrate: add ppp in INSTALL - add dev in INSTALL - -2002/02/08 dam's <damien@mandrakesoft.com> - - * pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png, - pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx - - * network/network.pm: corrected wireless modules - -2002/02/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for - various languages - -2002/02/08 Pixel <pixel@mandrakesoft.com> - - * docs/SHORTCUTS: add F1 & F2 - -2002/02/08 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added instructions for scanning on HP's MF devices to - the printer help page. - HP PhotoSmart printers do not scan, so do not show how to scan with - them. - Do not let dialogs of network configuration correction appear embedded - in the "Add printer" wizard. - Completed wizard mode for adding a printer in both recommended and - expert mode. - - * printer.pm: Enabled transferring queues of HP multi-function devices - between spoolers. - CUPS 1.1.13 dies on SIGHUP, do normal restart instead. - Completed wizard mode for adding a printer in both recommended and - expert mode. - -2002/02/08 warly - - * share/rpmsrate: add bootsplash in system 4 - -2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/02/07 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm: fix error causing a bad window sizing when there is - a horiz scroll - -2002/02/07 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: fixed shadow when testing X - -2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/help_xml2pm.pl: fixed email address - -2002/02/07 Pixel <pixel@mandrakesoft.com> - - * diskdrake/smbnfs_gtk.pm: - - don't pop the "do you want to install samba?" - - rwindow is not a window when embedded, so set_default_size only if - possible - - * my_gtk.pm: make perl_checker happy - ensure no more than one child is in the Plug - - * interactive.pm: fix (causing XFdrake to use a combo instead of a list) - - * interactive_gtk.pm: fix error causing a bad window sizing when there is - a horiz scroll - (exit): ensure USR1 is sent to mcc - - * Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when - choosing monitor "Custom" - - * install2.pm, install_steps.pm: create and use miscellaneousAfter (so - that SECURE_LEVEL is set *after* asking) - - * diskdrake/interactive.pm (Options): wrap the help text - - * standalone/diskdrake: handle --embedded xxx xxx - -2002/02/07 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * standalone/drakxtv, Makefile.config: add drakxtv (scantv gui) - - * standalone/localedrake: fix pixel stuff: don't restart wm on cancel - -2002/02/07 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: beta 2 - - * printerdrake.pm: corrected wizard pb - - * my_gtk.pm: wizard fixes - -2002/02/07 Pixel <pixel@mandrakesoft.com> - - * fs.pm (mount): precise the type when mounting in standalone (for smb, - nfs would not need it) - - * diskdrake/smbnfs_gtk.pm: - - don't pop the "do you want to install samba?" - - rwindow is not a window when embedded, so set_default_size only if - possible - - * interactive.pm: fix (causing XFdrake to use a combo instead of a list) - - * my_gtk.pm: ensure no more than one child is in the Plug - - * standalone/diskdrake: handle --embedded xxx xxx - - * interactive_gtk.pm (exit): ensure USR1 is sent to mcc - -2002/02/06 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: removed ugly pink and ugly left bar for wizard mode - -2002/02/06 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked - to hardware or options. - -2002/02/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: have frozen-bubble in GAMES at level 4 - -2002/02/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file - -2002/02/06 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Automatic configuration of the scanning part of HP's - multi-function devices. - - * printerdrake.pm: Added some stuff for the Wizard mode. - Automatic configuration of the scanning part of HP's multi-function - devices. - Updated automatic package installation in printerdrake, no "kups" and - "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also - "rpmsrate" and "rpmsrate.server" appropriately. - - * share/rpmsrate.server, share/rpmsrate: Added scanning packages to - INSTALL section, for HP MF device installation by printerdrake. - Updated automatic package installation in printerdrake, no "kups" and - "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also - "rpmsrate" and "rpmsrate.server" appropriately. - -2002/02/05 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for - HP's multi-function devices. - -2002/02/05 dam's <damien@mandrakesoft.com> - - * standalone/logdrake: wizard updated - correction for mcc. - -2002/02/05 François Pons <fpons@mandrakesoft.com> - - * share/rpmsrate.server: synced with normal rpmsrate for Basque - management. - - * install2.pm: auto_allocate for oem mode is not needed as oem script - create all necessary partition. - - * install_any.pm: add support for Basque (no KDE). - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67. - - * share/rpmsrate: add support for Basque (no netscape in such case) - - * rescue/tree/etc/oem: select preferred kernel as kernel-\d. - - * install_steps.pm: fixed logic, when someone want /root/drakx, - it has to check /root/drakx and not /root only. - -2002/02/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary - and it taints the kernel (pabo) - - * rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing - in /mnt - can really be used - -2002/02/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2002/02/05 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: fix "help lilo when there is hdd with no hdc drive" - - * Xconfigurator.pm: testFinalConfig now always returns true if test is - skipped because of a bad_card (back to the old behaviour, this was no - good (the aim is to enable changing the monitor when test is skipped)) - - * share/po/fr.po: fix "Details" translated in "Détails de la partition" - but is used at different - place where the meaning has nothing to do with "partitions" - -2002/02/05 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for - HP's multi-function devices. - -2002/02/05 warly - - * share/compssUsers.server: remove non server group from rpmsrate.server - add utilities group in compssUser.server - (webmin,ssh-server,wizards,monitoring) - - * share/rpmsrate.server: begin rpmsrate.server cleaning - -2002/02/05 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: fix "help lilo when there is hdd with no hdc drive" - - * Xconfigurator.pm: testFinalConfig now always returns true if test is - skipped because of a bad_card (back to the old behaviour, this was no - good (the aim is to enable changing the monitor when test is skipped)) - -2002/02/05 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: log the "chkconfig --del gpm" when there is a serial - mouse - -2002/02/04 dam's <damien@mandrakesoft.com> - - * standalone/logdrake: corrected typo. Yvounet, check your code!! - embedded, explain - - * my_gtk.pm: bug correction - - * standalone/drakfont, services.pm, network/netconnect.pm: applied cooker - guy english review - -2002/02/04 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added v4l module all the time (along with dbe already - present). - -2002/02/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps.pm: have numlock activated when isLaptop rather than - $o->{pcmcia} - -2002/02/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po, - share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po, - share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po, - share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, - share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po, - share/po/sv.po, share/po/zh_TW.po: updated some po files - -2002/02/04 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: fix creating /etc/security/msec/server - - * share/po/fr.po: fix "More" translation - -2002/02/04 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Made HP multi-function devices configured - with HPOJ being displayed correctly by printerdrake. - - * detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is - detected on a parallel port. - -2002/02/04 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/fr.po: update french translations - -2002/02/03 Pixel <pixel@mandrakesoft.com> - - * any.pm: force a few more "list"s instead of "combo" boxes - since "format" is now handled for combo boxes, combo boxes are used in - much too many places. Fix this by forcing type "list" for some cases, - and using type "list" when a ask_from has only one entry - - * interactive.pm: since "format" is now handled for combo boxes, combo - boxes are used in much too many places. Fix this by forcing type "list" - for some cases, and using type "list" when a ask_from has only one entry - - * bootloader.pm: - - fix some vga text modes 80x30 - - chmod 600 lilo.conf when a password is given - - fix general "append" - (thanks to David Eastcott) - "password" works without "restricted", not the other way round (reported - by David Eastcott) - fix typo - -2002/02/03 warly - - * share/rpmsrate.server: synchronize with current cooker rpmsrate - -2002/02/03 Pixel <pixel@mandrakesoft.com> - - * any.pm: force a few more "list"s instead of "combo" boxes - since "format" is now handled for combo boxes, combo boxes are used in - much too many places. Fix this by forcing type "list" for some cases, - and using type "list" when a ask_from has only one entry - - * interactive.pm: since "format" is now handled for combo boxes, combo - boxes are used in much too many places. Fix this by forcing type "list" - for some cases, and using type "list" when a ask_from has only one entry - - * bootloader.pm: fix typo - help lilo when there is hdd with no hdc drive (needs testing!) - -2002/02/03 warly - - * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and - compssUsers.server - -2002/02/03 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: help lilo when there is hdd with no hdc drive (needs - testing!) - -2002/02/03 warly - - * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and - compssUsers.server - -2002/02/02 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: XFree is now 4.2 - - * standalone/fileshareset: fix dropping samba sections which don't have - any "path=" - -2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po, share/po/DrakX.pot: updated Swedish file - - * share/po/fr.po: merged again French file to recover some lost strings; - and added non breakable spaces at all the needed places as required - by French typography - -2002/02/01 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm: please perl_checker - - * install_interactive.pm: use from_Mb for choosing the size of the windows - partition - - * install_steps.pm: create symlink /etc/security/msec/server in security > - 3 - -2002/02/01 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: First steps of the implementation for the "Add printer" - wizard. - - * detect_devices.pm: Made auto-detection working for HP DeskJet 840C on - USB - General improvements for reliability of USB printer auto-detection - -2002/02/01 yduret - - * pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still - jeune and boulet) - rm for readding with -kb option (i am jeune and boulet) - - * standalone/logdrake: ergo fix thx dadou report - fix --explain=foo bug that prevent to show anything - - * bootlook.pm: ergo fix thx dadou report... - -2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * services.pm, standalone/drakbackup, printerdrake.pm, - standalone/logdrake: changed some strings to make translation easier - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/02/01 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm: please perl_checker - - * install_interactive.pm: use from_Mb for choosing the size of the windows - partition - - * Xconfigurator.pm: testFinalConfig now returns false if test is skipped - because of a bad_card or - verybad_card and $skip_badcard is not set - -2002/01/31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and - keyboard choices (KDE is translated to Tamil) - -2002/01/31 yduret - - * pixmaps/wiz_scannerdrake.png: on rajoute la zolie image - -2002/01/30 Pablo Saratxaga <pablo@mandrakesoft.com> - - * Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard - - * keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic" - keyboard - - * lang.pm: Enabled "ms" language in the language selection list (there are - Gnome and KDE - translations for it) - - * share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po, - share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po, - share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po, - share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po: - updated some po files - -2002/01/30 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: add gnome-core in GNOME (used to be required?) - - * Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the - running_window_manager" and "ask_window_manager_to_logout" to any.pm - - * any.pm (ask_window_manager_to_logout, running_window_manager): created - from Xconfigurator and cleaned - (selectLanguage): if $langs is empty, don't ask for "other languages" - - * pixmaps/wiz_printerdrake.png: re-adding with -kb - removing for re-adding with -kb - - * standalone/localedrake: now works in normal user: it modifies the - ~/.i18n (todo: handle kde crazy variables?) - - * lang.pm: handle read'ing and write'ing to a specified file (useful - example: ~/.i18n) - -2002/01/30 sdupont - - * standalone/drakbackup: complex merging.... - change /var/drakbackup to /var/lib/drakbackup - crontab update - mail report update - sendmail update - require rpm mode - code optimisation - remove about gi - new help function - -2002/01/29 Till Kamppeter <till@mandrakesoft.com> - - * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of - printerdrake. - - * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer" - wizard. - Improvements for the selection of a local printer, especially when no or - one printer was detected. - -2002/01/29 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: icons placements are better - -2002/01/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakbug_report, standalone/drakautoinst, install2.pm, - install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move - /root/* files (ddebug.log, install.log, report.bug, - auto_inst.cfg.pl, replay_install.img) to /root/drakx/, - and also save stage1.log there - - * partition_table_raw.pm: add new pixel-made grub signature - - * crypto.pm: update land2tzs accordingly to new url2land - Add url2land entries for nl, it, at - - * any.pm: move /root/* files (ddebug.log, install.log, report.bug, - auto_inst.cfg.pl, replay_install.img) to /root/drakx/, - and also save stage1.log there - rephrase a little bit highest level - to not refer to "level 4" anymore - use formatAlaTeX for describing security levels - - * install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk - -2002/01/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po, - share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po, - share/po/es.po: updated pot file with help messages from manual - -2002/01/29 Pixel <pixel@mandrakesoft.com> - - * interactive.pm: handle "format" for combo's - - * bootloader.pm: use the new format for combo's to clean code handling - {vga} field - - * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory - - * any.pm: use the new format for combo's to clean code handling {vga} - field - handle the case where samba and/or nfs-utils are not installed - - * install_steps.pm: move the various bootloader::add_append's in - setupBootloaderBefore - - * diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils - are not installed - - * install_steps_interactive.pm: visually unselect X and docs when minimal - install - "With X" choice is now working - handle "Cancel" on language selection - -2002/01/29 Till Kamppeter <till@mandrakesoft.com> - - * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of - printerdrake. - - * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer" - wizard. - Improvements for the selection of a local printer, especially when no or - one printer was detected. - -2002/01/29 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * interactive.pm: fix pixel's minimal example using interactive. - -2002/01/29 yduret - - * docs/interactive/ask_from_list, docs/interactive/wait_message, - docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf, - docs/interactive/ask_from: added some snipet coe for example - - * standalone/logdrake: logdrake is now under gi/perl-install/standalone - -2002/01/29 Pixel <pixel@mandrakesoft.com> - - * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory - - * install_steps.pm: move the various bootloader::add_append's in - setupBootloaderBefore - -2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: do the few new translations - - * standalone.pm: try to reflect hierarchy for */*.pm - -2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, - share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po, - printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po, - share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po, - standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po, - share/po/id.po: Corrected various English typos - -2002/01/28 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: fix typo - - * partition_table.pm: warn if partitions have been renumbered due to a - partition being added or removed - - * diskdrake/interactive.pm: don't warn_if_renumbered during install - warn if partitions have been renumbered due to a partition being added - or removed - -2002/01/28 siegel - - * share/po/de.po: new german version - -2002/01/28 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Replaced "sleep" commands by a subroutine which waits - exactly until CUPS is ready. - CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device - is not "known" to it. - - * printer.pm: Removed debug helper line. - Replaced "sleep" commands by a subroutine which waits exactly until CUPS - is ready. - CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device - is not "known" to it. - -2002/01/28 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/br.po: update brezhoneg translations - - * share/po/fr.po: more french translations - -2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, - share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po, - printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po, - share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po, - standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po, - share/po/id.po: Corrected various English typos - -2002/01/28 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: fix typo - - * diskdrake/interactive.pm, partition_table.pm: warn if partitions have - been renumbered due to a partition being added or removed - -2002/01/28 dam's <damien@mandrakesoft.com> - - * network/tools.pm, network/netconnect.pm: debug network testing - -2002/01/28 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of - scroll bar and reduced its size. - - * bootloader.pm: fixed get_append if key=mem. - timeout passed to 10 instead of 5. - -2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: update games rates - -2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/01/28 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (remove_advertising): ensure removing /tmp/drakx-images - can't fail - - * any.pm: simpler&nicer solution for writing kppprc in utf8 - have kppprc strings in utf8 - - * detect_devices.pm: remove test code - - * install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully - handling nicely the mem=nopentium case) - - * diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting - is usually very short), use a waiting cursor instead. - (the wait_message's were causing bad interactivity stuff) - -2002/01/27 Pixel <pixel@mandrakesoft.com> - - * interactive.pm: add a minimal example - - * services.pm: - - move the require on my_gtk to ask_standalone_gtk - - cleanup - - * Makefile.config: - - adapt to new diskdrake modules - - add logdrake to STANDALONEPMS_ - - * my_gtk.pm: strange protection against ensure_focus generating a "focus" - event causing a - dead-loop (reminder: ensure_focus helps ensuring a widget is focused) - - * Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm, - install_interactive.pm, diskdrake.pm: - - adapt to new diskdrake modules - - some cleanup in drakxtools build - - * diskdrake/removable.pm: remove debugging code - new diskdrake modules (diskdrake_interactive is now - diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others - created from diskdrake.pm) - - * diskdrake/interactive.pm, diskdrake/hd_gtk.pm, - diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive - is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, - others created from diskdrake.pm) - - * diskdrake/smbnfs_gtk.pm: fix updating the actions - new diskdrake modules (diskdrake_interactive is now - diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others - created from diskdrake.pm) - - * network/nfs.pm: find_exports: add a timeout - - * fs.pm: new function fstab_to_string - - * standalone/diskdrake: handle --removable *and* --removable=<dev> - handle --removable=<dev> - - new options --hd, --nfs, --smb, --removable - - adapt to new diskdrake modules - - save $all_hds->{current_fstab} to know if /etc/fstab must be saved - -2002/01/25 fabman - - * share/po/es.po: updated spanish translation - -2002/01/25 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: add devfsd - - * install_any.pm: remove_advertising: use rm_rf since we don't have the - real list of files (the .pl's are not in @advertising_images) - - * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx' - -2002/01/25 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Less important options only shown when - "Advanced" button clicked. - Handling of cursor position in the main window improved. - Handling of empty printer queue list in main window improved. - Removed line breaks from longer texts, so that text flows into window - nicely - Minor text improvements. - -2002/01/25 dam's <damien@mandrakesoft.com> - - * install_any.pm: advertising engine updated - - * share/logo-mandrake.png: beta logo - - * install_steps_gtk.pm: corrected decy - advertising engine updated - -2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: please find a better fix - -2002/01/25 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple - linux - fix spelling - - * Makefile: call clean-rpmsrate - - * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx' - -2002/01/25 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm, install_any.pm: advertising engine updated - - * share/po/fr.po: typo - - * share/logo-mandrake.png: beta logo - -2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: please find a better fix - -2002/01/25 Pixel <pixel@mandrakesoft.com> - - * mdk-stage1/Makefile: ensure errors propagate - - * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple - linux - fix spelling - - * Makefile: call clean-rpmsrate - - * mdk-stage1/pci-resource/Makefile: silly shell - ensure errors propagate - -2002/01/25 dam's <damien@mandrakesoft.com> - - * share/po/fr.po: typo - corrected too long label Mise à niveau deas paquetages seule. please - find a better FIX - -2002/01/25 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: cosmetic changes. - - * pkgs.pm: fixed try opening to trigger changeCD callback. - -2002/01/24 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: - - add msec in any install - - use BIGMEM flag for kernel-enterprise - - use SMP flag for kernel-smp - (those 2 goes together with Warly's clean-rpmsrate) - add flag DOCS which should work together with !excludedocs - - * any.pm: ensure grub is installed if grub is chosen - - * install_any.pm: - - add DOCS (based on !excludedocs) - - set BIGMEM and SMP flags - (since kernel-smp and kernel-enterprise sub-numbers are better handled - by - rpmsrate together with Warly's clean-rpmsrate) - - * install_steps_interactive.pm, install2.pm: minimal install now handles - excludedocs - - * install_steps.pm: log excludedocs - minimal install now handles excludedocs - put devfs=mount only if devfsd is installed - - * diskdrake_interactive.pm: truncate lvm name to 63 characters since - longer vg names are not allowed - -2002/01/24 Till Kamppeter <till@mandrakesoft.com> - - * detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu - entry appearing after adding a new printer. - Modified "Local Printer" dialog to be more newbie-friendly. - -2002/01/23 dam's <damien@mandrakesoft.com> - - * network/adsl.pm: updated speedtouch code to use pppoa3 - - * my_gtk.pm: removed font loading - -2002/01/23 François Pons <fpons@mandrakesoft.com> - - * bootloader.pm: fixed to allow multiple mem=xxx parameter (especially - mem=nopentium). - - * install_steps.pm: restored mem=nopentium. - removed mem=nopentium. - -2002/01/23 Pixel <pixel@mandrakesoft.com> - - * standalone/fileshareset: name mangling max length set to 12 - use name mangling for samba labels - -2002/01/23 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: New user interface in main window - More printer info in printer modification window - Better support for remote CUPS printers - -2002/01/22 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: improved widget_icons - - * install_steps.pm: added net_cnx_pg output when configuring network in - auto install - -2002/01/22 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: added support to save already existing synthesis file. - - * install_any.pm: changed code to build synthesis file, check if they have - not already been copied - from mirror, or build them using parsehdlist. - -2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: Translate a few things more - -2002/01/22 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's) - defaults to ext3 instead of ext2 - - * interactive.pm: add "quit_if_double_click" and "tree_expanded" flags - (request from till) - add feature "allow_empty_list" for "list" entries (disables the special - cases for 0 and 1 element lists) - - * install_any.pm, diskdrake.pm: cleanup error messages (and fix - diskdrake's) - - * install_interactive.pm, raid.pm: defaults to ext3 instead of ext2 - - * partition_table.pm: remove unused auto_win_extended stuff - handle extended partitions with no partitions inside (esp. for the first - hda5 & windows XP) - - * bootloader.pm: - - fix default not being formatted like labels for lilo - - check the label is not already used *case-sensitively* - - check a kernel_or_dev is given - - * any.pm: - - remove the default entry when that entry is removed - - use allow_empty_list for displaying the entries - - fix default not being formatted like labels for lilo - - check the label is not already used *case-sensitively* - - check a kernel_or_dev is given - - * fsedit.pm: yet again better error reporting - defaults to ext3 instead of ext2 - - * standalone/drakboot, bootlook.pm: fix yves's code duplication of - lilo_choice (use $::lilo_choice in bootlook) - - * interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags - (request from till) - - * install_steps_interactive.pm: cleanup error messages (and fix - diskdrake's) - better messages for the minimal installs - - * standalone/diskdrake: yet again better error reporting - cleanup error messages (and fix diskdrake's) - - * share/rpmsrate: move mandrake-mime from SYSTEM to X - lower sndconfig - -2002/01/22 fcrozat - - * share/rpmsrate: Really install gnome control center when installing - GNOME - -2002/01/22 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: added mem=nopentium for any Athlon or Duron processor. - -2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * Makefile: exclude standalone from testing - - * share/po/fr.po: resolve small conflict - -2002/01/22 Pixel <pixel@mandrakesoft.com> - - * modules.pm: add the new "mii" module to 'net_raw' - - * install_steps_interactive.pm: better messages for the minimal installs - fix a few cancel's (reported by slegros) - don't ask security level in non-expert - - * install_steps_gtk.pm, install_interactive.pm: fix a few cancel's - (reported by slegros) - - * share/rpmsrate: move mandrake-mime from SYSTEM to X - lower sndconfig - -2002/01/21 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing - - * install_steps_interactive.pm, install2.pm: can't call - any::config_libsafe so early during install, move it where msec is - called - - * any.pm: quiet perl's warning - -2002/01/21 dam's <damien@mandrakesoft.com> - - * install_steps.pm: fixed network conf in auto install - corrected network down - - * my_gtk.pm: removed debug print - icons widget improvment : icon placment, highlighting - -2002/01/21 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: increase the size of the "Choose action" box - - * diskdrake_interactive.pm: remove the "Active" partition feature - - * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing - - * install2.pm: can't call any::config_libsafe so early during install, - move it where msec is called - - * install_steps_interactive.pm: can't call any::config_libsafe so early - during install, move it where msec is called - cleanup, update, enhance security level choice - - * standalone/draksec: cleanup, update, enhance security level choice - - * install_steps.pm: remove deprecated msec groups adding - cleanup - - * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub - - * any.pm: quiet perl's warning - cleanup, update, enhance security level choice - when creating users, add handling of xgrp/rpm/adm/wheel groups in high - security - fix advice about "usermod -G" - - * tools/i386/netboot/menu.lst.example: add gateway parameter - -2002/01/21 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: new ugly icon - - * install_steps.pm: corrected network down - -2002/01/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2002/01/21 Pixel <pixel@mandrakesoft.com> - - * share/fonts.tar.bz2: add helvR12_iso15 - - * install_steps_interactive.pm: """ When I choose a / partition smaller - than 200 MB, the installation - gives me an error message complaining that my system does not - have enough free space for the installation, although basesystem - install - require less than 100 MB. """ - up to around 250MB, minimal install is chosen. - questions are: base system only, or no X, or normal. - -2002/01/21 siegel - - * share/po/de.po: updates - - * standalone/drakbackup: fixed i18n bugs - -2002/01/20 Pixel <pixel@mandrakesoft.com> - - * install2.pm: call msec with run_commands=0 to fix the network reloading - (causing various problems, esp. "Net::FTP: Timeout" at X config step) - -2002/01/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakbackup: sorry, _("$_") is not allowed - -2002/01/20 Pixel <pixel@mandrakesoft.com> - - * share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with - '\n'" - - * install2.pm: call msec with run_commands=0 to fix the network reloading - (causing various problems, esp. "Net::FTP: Timeout" at X config step) - -2002/01/20 yduret - - * timezone.pm: added Italy (time.ien.it) in - -2002/01/19 Stew Benedict <sbenedict@mandrakesoft.com> - - * standalone/drakbackup: Rework English syntax in drakbackup - hopefully - I've got the intent correct ;^) - -2002/01/19 Till Kamppeter <till@mandrakesoft.com> - - * detect_devices.pm: Replaced USB printer auto-detection by a more - reliable method. - -2002/01/18 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: changed Update -> Upgrade for installation - class. - -2002/01/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/draknet: - - move 'use standalone' up to comply to 'explanations' - - fix an english typo, s/connexion/connection/ - - * standalone/drakgw: - - move 'use standalone' up to comply to 'explanations' - - write higher-level 'explanations' - - small fix, s/`ls ..`/glob(..)/ - - * standalone/scannerdrake: - - move 'use standalone' up to comply to 'explanations' - - fix a small english problem - - * share/po/fr.po: reduce a lot of fuzzy and untranslations - large stuff from printerdrake, drakbackup and drakfont still to do :-) - - * c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor, - standalone/drakautoinst, standalone/keyboarddrake, - standalone/localedrake, standalone/livedrake, standalone/drakboot, - standalone/draksec, standalone/tinyfirewall, standalone/mousedrake, - standalone/drakxservices, standalone.pm, standalone/drakproxy, - standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake, - standalone/drakxconf, log.pm, standalone/logdrake, - standalone/drakbackup, standalone/drakfont: - - write the 'common' part of the 'explanations' stuff, - with nice help from Pixel for the tough Perl part - - move 'use standalone' up in all standalone apps, - to comply to 'explanations' - -2002/01/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2, - share/fonts.tar.bz2: changes to get in line with new XFree86 - -2002/01/18 Pixel <pixel@mandrakesoft.com> - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11 - locale on the box so that XI18N_OBJS's and common are included - -2002/01/18 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: add update flag for urpmi medium. - - * install_steps_interactive.pm: even if user cancel update of package on - tree, allow urpmi to install the medium. - avoid downNetwork as no difference are made between ethernet or ppp. - fixed typo. - allow cancel when installUpdates. - - * crypto.pm: add update medium for crypto for urpmi (flag update). - fixed typo. - allow selection/deselection of update medium (for cancel of - installation). - - * install_steps_gtk.pm: allow choosePackageTree to display a cancel if a - specific medium has been given. - -2002/01/18 Pixel <pixel@mandrakesoft.com> - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11 - locale on the box so that XI18N_OBJS's and common are included - -2002/01/18 sdupont - - * standalone/drakfont: update warning messages (qa). - - * standalone/drakbackup: fix traduction problems and more ... - -2002/01/17 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm, diskdrake_interactive.pm: better error message when auto - allocate doesn't do anything - -2002/01/17 dam's <damien@mandrakesoft.com> - - * network/tools.pm, network/netconnect.pm: draknet : success message only - if success - - * my_gtk.pm: added timeout for redrawing icon widget - -2002/01/17 fcrozat - - * share/rpmsrate: kdebase-nsplugins will be installed by default when - selecting KDE - -2002/01/17 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: avoid upgrading a package by selection on files unless it has - been obsoleted. - -2002/01/17 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/" - and "/usr") - - * fsedit.pm, diskdrake_interactive.pm: better error message when auto - allocate doesn't do anything - check the mountpoint is valid for encrypting (disallow "/" and "/usr") - - * fs.pm: do not create /swap - - * services.pm: move service apcupsd from Printing to System - - * bootloader.pm: fix many disks bios remapping (esp. booting on scsi when - ide is present) - -2002/01/17 sdupont - - * standalone/drakbackup: stable version for qa pkg. - (without unstables options) - -2002/01/16 Pixel <pixel@mandrakesoft.com> - - * any.pm: fix cancel on scsi module loading - -2002/01/16 sdupont - - * standalone/drakbackup: update send mail. - (pixel mode. ;)) - -2002/01/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps_interactive.pm: installUpdates: use formatAlaTeX - -2002/01/16 Pixel <pixel@mandrakesoft.com> - - * any.pm: fix cancel on scsi module loading - - * install_steps_interactive.pm: don't drop default_packages in "Base - system only" - - * standalone/fileshareset: add locking to ensure things are in a proper - state - -2002/01/15 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: advertising engine amelioration - - * my_gtk.pm: automatic icon placement in icon_labels_widget - -2002/01/15 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: remove the test trick - encrypted filesystem handling: - - using losetup - - add "Options" for partitions in diskdrake (expert mode) - - * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm, - diskdrake.pm: encrypted filesystem handling: - - using losetup - - add "Options" for partitions in diskdrake (expert mode) - -2002/01/15 dam's <damien@mandrakesoft.com> - - * network/isdn_consts.pm: updated - -2002/01/15 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: remove the test trick - encrypted filesystem handling: - - using losetup - - add "Options" for partitions in diskdrake (expert mode) - - * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm, - diskdrake.pm: encrypted filesystem handling: - - using losetup - - add "Options" for partitions in diskdrake (expert mode) - - * any.pm: have ddcxinfos take the best result of every run - -2002/01/15 sdupont - - * standalone/drakfont: fix progress bar problem. - some gi updates: - - windows font importation. - - advanced font importation. - - licence interface. - - ... - - * standalone/drakbackup: new ./drakbackup --show-conf - fix daemon problem (media to use). - update informations on drakbackup report mail. - __ 3290 lines. - man pages fr created. - some code cleaning on backend mode. (all_user_list && return_path) - new functions on backend mode: - - show-conf - - debug - - help - - version. - -2002/01/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: - - eata is SCSI adapter, not 'disk' adapter - - have eata module in boot floppies - - * mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in - pci ids - - * share/rpmsrate: have lbreakout weigthed 4 instead of 2 - - * mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive - (sugg David Faure - and Pixel) - -2002/01/14 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: fix typo (making auto installs working again) - -2002/01/13 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: s/lbreakout/lbreakout2/ - - * install_steps_interactive.pm: cleanup - -2002/01/13 sdupont - - * standalone/drakbackup: some updates ... - in "more option" steps user could choose to receive a report by mail for - each backups. - ftp backup work. - fix time problems. - remove doc from file. - security fix for configuration file. - -2002/01/11 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: advertising engine works ! - champagne. - still some display bugs, but they will be corrected later. - need new ads and adequat description file - new advertising engine - - * install_any.pm: modifications for new avertising engine - - * my_gtk.pm: new icons placement - -2002/01/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot, - share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po, - share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po, - share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po, - share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po, - share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po, - share/po/it.po: updated Spanish file; merged help-* files - -2002/01/11 sdupont - - * standalone/drakbackup: update header pixmaps. - correction of message problem. - - * pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png, - pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont. - - * standalone/drakfont: update header pixmaps. - -2002/01/10 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: domainname corection - - * network/network.pm: domainname corection - corrected network domainname pb - - * install2.pm: corrected read_resolv => read_conf - -2002/01/10 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: english taste inspired by daminette. - -2002/01/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/lsparts: better looking output of type of partition (%x => %0x) - -2002/01/09 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, standalone/net_monitor, standalone/draknet, - network/network.pm, network/modem.pm, network/netconnect.pm: big merge - from update 8.1 with cvs - First part. Part 2 following - - * my_gtk.pm: added bold option in text creation. Some corrections - - * install_steps_interactive.pm: corrected fpons typo - -2002/01/09 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed too many package selected for No X or With X - option of minimal installation. - - * install_steps_interactive.pm: avoid asking for minimal install for - upgrade. - - * crypto.pm: fix incomplete prefix for update mirror when adding an entry - for urpmi. - - * pkgs.pm: use rpm version comparison function. - - * c/stuff.xs.pm: added rpmvercmp. - -2002/01/09 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed too many package selected for No X or With X - option of minimal installation. - - * install_steps_interactive.pm: avoid asking for minimal install for - upgrade. - - * crypto.pm: fix incomplete prefix for update mirror when adding an entry - for urpmi. - - * pkgs.pm: use rpm version comparison function. - - * c/stuff.xs.pm: added rpmvercmp. - -2002/01/09 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed too many package selected for No X or With X - option of minimal installation. - - * install_steps_interactive.pm: avoid asking for minimal install for - upgrade. - fixed stupid. - - * crypto.pm: fix incomplete prefix for update mirror when adding an entry - for urpmi. - - * pkgs.pm: use rpm version comparison function. - - * c/stuff.xs.pm: added rpmvercmp. - -2002/01/08 dam's <damien@mandrakesoft.com> - - * install2.pm: cosmetik - -2002/01/08 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: added eval around pixmap drawing for advertising. - -2002/01/08 Pixel <pixel@mandrakesoft.com> - - * standalone/drakbackup: another round of bad use of _() fixes. - fixed bad use of _(). - -2002/01/08 sdupont - - * standalone/drakbackup: drakbackup work ... - incremental backup and restore work. - -2002/01/08 François Pons <fpons@mandrakesoft.com> - - * Makefile: again fixed dam's sucking, please dam's check what you write - before commiting. - - * standalone/drakautoinst: removed stupid invocation of _("$_"), is it - correct code to change it to $_ only ? - -2002/01/08 François Pons <fpons@mandrakesoft.com> - - * Makefile: again fixed dam's sucking, please dam's check what you write - before commiting. - - * standalone/drakautoinst: removed stupid invocation of _("$_"), is it - correct code to change it to $_ only ? - -2002/01/08 François Pons <fpons@mandrakesoft.com> - - * Makefile: again fixed dam's sucking, please dam's check what you write - before commiting. - -2002/01/07 François Pons <fpons@mandrakesoft.com> - - * steps.pm: changed installUpdates after summary (to get corrected - timezone). - - * install_any.pm: separated setDefaultPackages from setPackages because it - is used by allowing - only base system to be installed (allow remade a better package - selection). - - * crypto.pm: added bestMirror method to retrieve a good mirror (according - to timezone) and - add salt with random number to avoid using always the same. - - * install2.pm: added option to only upgrade packages. - - * install_steps_interactive.pm: added minimal type of install support. - - * share/list: fixed to match newer menu package. - -2002/01/07 François Pons <fpons@mandrakesoft.com> - - * steps.pm: changed installUpdates after summary (to get corrected - timezone). - - * install_any.pm: separated setDefaultPackages from setPackages because it - is used by allowing - only base system to be installed (allow remade a better package - selection). - - * crypto.pm: added bestMirror method to retrieve a good mirror (according - to timezone) and - add salt with random number to avoid using always the same. - - * install2.pm: added option to only upgrade packages. - - * install_steps_interactive.pm: added minimal type of install support. - - * share/list: fixed to match newer menu package. - -2002/01/07 dam's <damien@mandrakesoft.com> - - * Makefile: socmetic - typo - added debug mode for the whole install - - * my_gtk.pm: removed print - new pack_start functions, powerpack sub added (code from adrien) - incorporated adrien's code to generalize pack functions - minor bug fixes - - * install_steps.pm, network/netconnect.pm: corrected network connection - during install - - * install2: added debug mode for the whole install - -2002/01/07 François Pons <fpons@mandrakesoft.com> - - * steps.pm: changed installUpdates after summary (to get corrected - timezone). - - * install_any.pm: separated setDefaultPackages from setPackages because it - is used by allowing - only base system to be installed (allow remade a better package - selection). - - * crypto.pm: added bestMirror method to retrieve a good mirror (according - to timezone) and - add salt with random number to avoid using always the same. - - * install2.pm: added option to only upgrade packages. - - * install_steps_interactive.pm: added minimal type of install support. - - * share/list: fixed to match newer menu package. - - * Makefile: fixed overwriting of install2 filtering, keep diagnostic and - strict for debug mode. - -2002/01/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: also log server name for HTTP install - -2002/01/04 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm, - network/netconnect.pm: corrected minor bugs in network (among others bug - "modifying read only values") - recode upNetwork and downNetwork (it might work, at least if you are - lucky); - -2002/01/04 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: corrected minor bugs in network (among others bug "modifying - read only values") - recode upNetwork and downNetwork (it might work, at least if you are - lucky); - corrected font display : no useless font->height, but ascent + descent - updated - - * network/isdn_consts.pm: changed asus isdn hisax identify - - * network/adsl.pm, install_steps.pm, network/tools.pm, - network/netconnect.pm: corrected minor bugs in network (among others bug - "modifying read only values") - recode upNetwork and downNetwork (it might work, at least if you are - lucky); - -2002/01/04 François Pons <fpons@mandrakesoft.com> - - * http.pm, install2.pm, steps.pm, install_any.pm: added update - installation support to install (big modifs need testing). - - * pkgs.pm: allow to use same identifier for security medium (1u). - re-install urpmi. - allow some error to be catched. - added update installation support to install (big modifs need testing). - - * crypto.pm: removed test code. - allow to use same identifier for security medium (1u). - re-install urpmi. - allow some error to be catched. - added update installation support to install (big modifs need testing). - - * install_steps_interactive.pm: removed obsoleted comment. - allow to use same identifier for security medium (1u). - re-install urpmi. - allow some error to be catched. - added update installation support to install (big modifs need testing). - - * install_steps_gtk.pm: fixed empty flat package selection when giving a - limit to medium. - added update installation support to install (big modifs need testing). - - * install_steps.pm: allow to use same identifier for security medium (1u). - re-install urpmi. - allow some error to be catched. - fix for auto updates. - added update installation support to install (big modifs need testing). - -2002/01/04 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm: enable easy patch-adding of pcitable and usbtable - entries - -2002/01/03 dam's <damien@mandrakesoft.com> - - * standalone/drakbackup: user can be equal to 500 - -2002/01/03 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: updated code to create synthesis file (including - provides on files). - -2002/01/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ar.po: updated Arabic file - -2002/01/03 Pixel <pixel@mandrakesoft.com> - - * install2.pm, Xconfig.pm: save the output of ddcxinfos before - modprobe'ing i810fb, and use that output for Xconfig (when i810fb is - modprobe'd, ddc probe doesn't work anymore) - - * install_steps_interactive.pm, install_steps_gtk.pm: fix english messages - - * share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo - - * pkgs.pm: prefer gcc-cpp - - * interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button - - * any.pm: fix english messages - save the output of ddcxinfos before modprobe'ing i810fb, and use that - output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work - anymore) - -2002/01/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: changed @euro locales to plain names; now old currencies ones - are obsolete - -2001/12/31 sdupont - - * standalone/drakfont: new fixed size and add a head pixmap (to update). - - * standalone/drakbackup: lots of update ... - - cron work. - - backup incremental & normal work. - - corrupted backup data files supported. - - error messages updated. - - aff list of backup data files pbs. - - test all backup files before to restore it. - -2001/12/30 Pixel <pixel@mandrakesoft.com> - - * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the - root reserved part is 0% (and not 5%) - -2001/12/30 Pixel <pixel@mandrakesoft.com> - - * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the - root reserved part is 0% (and not 5%) - -2001/12/28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectMouse): when selecting a usb mouse, - call setup_thiskind with - at_least_one=1 (so that pci_class probe is used and so unknown - serial_usb - recognised (cf ldetect)) - - * modules.pm (load_thiskind): allow $probe_type to be given, allowing - forced pci probe (unsafe) - - * any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind - forcing - pci_class probe when no modules is found. - -2001/12/28 sdupont - - * standalone/drakbackup: update select data on backup cd - -2001/12/27 sdupont - - * standalone/drakbackup: fix of user selection during restore step. - remove return_file_date. - change algo for incremental backup. - -2001/12/26 sdupont - - * standalone/drakbackup: some gi corrections & update. - incremental restore. - -2001/12/22 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is - only used during install - - * my_gtk.pm: export gtkcolor (used in install_steps_gtk) - make perl_checker happy - -2001/12/22 sdupont - - * pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png, - pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png, - pixmaps/backup_hd.png, pixmaps/backup_title.png, - pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png, - pixmaps/backup_options.png, pixmaps/backup_net.png: remove old - drakbackup pixmaps files. - - * pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png, - pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png, - pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png, - pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png, - pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png, - pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png, - pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png, - pixmaps/ic82-back-up-48.png: drakbackup designer icons. - - * standalone/drakbackup: add pixmaps on backup step. - new designer pixmaps on drakbackup. - -2001/12/21 sdupont - - * standalone/drakbackup: some update in file name parsing... - etc ... - - * pixmaps/BDO-drakebackup1.png: drakbackup - -2001/12/20 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: API changed, so call changed - - * share/logo-mandrake.png: new ayo logo - -2001/12/20 sdupont - - * standalone/drakbackup: update the todo header - the REQUIRE header - & code cleaning - - tar -cvf tarfilename --after-date="sept 1, 2000" /home - l.380 incremental: date -> if already exist do find -m ... | tar ... - non incremental: date + delete old before the backup - - correct detection of backups during restore. - - gi for other media during restore. hd-> ok - - backend for build backup update and support - incremental backups. - - real incremental backup - update resore & help. - -2001/12/19 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: update graphical backend - -2001/12/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: add dl2k.o (nic module) per request of nplanel - -2001/12/19 sdupont - - * standalone/drakbackup: - - gi for other media during restore. hd-> ok - - backend for build backup update and support - incremental backups. - - real incremental backup - add other media source during restore. - - update help & license. - - code cleaning. - - ask during whqt sys step if user want to backup critical - files, like /etc/passwd /etc/group /etc/fstab - - use preserve permissions during tar - - begin of total backup step.( all partitions wanted, windows - partitions for example!) - - remove replace mode (backup_*_version is enought) - -2001/12/18 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is - untested). - -2001/12/18 Pixel <pixel@mandrakesoft.com> - - * any.pm: fix typos - -2001/12/18 sdupont - - * standalone/drakfont: include new pixmap on main menu. - - * standalone/drakbackup: sort lists in all lists selection. - correct use of incremental backup - parse of restore & system state. - fix restore user selection problems - fix build backup data selection problems - ect ... - drakbackup -> drakxtools.rpm - - * pixmaps/ic-drakfont-48.png: drakfont pixmap... - -2001/12/18 yduret - - * standalone/logdrake: fix console mode : exit now - -2001/12/18 Pixel <pixel@mandrakesoft.com> - - * any.pm: fix typos - -2001/12/17 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: power graphical backend update : text is now - centered - - * my_gtk.pm: power graphical backend update : text is now centered - updated new graphical backend - -2001/12/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive_gtk.pm, standalone/drakgw: drakgw for gold - - * tools/pcmcia_config.patch: remove permanently (using - patch_pcmcia_config.pl now) - -2001/12/17 Pixel <pixel@mandrakesoft.com> - - * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using - tmpfs - -2001/12/17 sdupont - - * standalone/drakbackup: - ________________________________________________________________ - DONE: - incremental backups have depends whith replace options. - gtklist not maximized. - restore mode. - view date during restore - view size of file, date & hours during backup on CD - ________________________________________________________________ - -2001/12/17 Pixel <pixel@mandrakesoft.com> - - * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using - tmpfs - -2001/12/14 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2. - -2001/12/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection - PCI entries : - what's in mar files --> what's given by modules (e.g. just - as update_kernel does) - -2001/12/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install2.pm: use "askdisplay" to ask a question at begining of install - for what - display you want to use during install - - * Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config - (from make_boot_img) - because we need it in perl-install/Makefile also - - * mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc, - rescue/Makefile: have a bunch of Rescue documentation directly - available from the Rescue-menu following suggestions - by Denis among others - -2001/12/12 Pixel <pixel@mandrakesoft.com> - - * install2.pm: enable easy screenshot'ing - - ensure /usr is formatted if / is - - remove /var/lib/rpm if /var is kept - - * common.pm, docs/README: enable easy screenshot'ing - -2001/12/12 Stew Benedict <sbenedict@mandrakesoft.com> - - * rescue/make_rescue_img: larger rescue image on PPC to accomodate huge - xfs module - - * bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs - initrd load - -2001/12/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support - "filename" in DHCP answers and give this - to stage2 as --kickstart parameter - -2001/12/11 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC, - add "\n" keyboard.pm, new modelines - -2001/12/10 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: added network package not present in @needToCopy - (package that may be installed - by DrakX to avoid re-asking of CD1). - - * bootloader.pm: added safe guard against looping symlink. - -2001/12/10 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, any.pm, bootloader.pm: - - fix bootloader::add_append - - add handling of serial console - - * http.pm, install_any.pm: enable http:// in auto_install file location - -2001/12/05 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: no need to give kernelVersion to bootloader::suggest - - * install_any.pm (kernelVersion): looks at /boot/vmlinuz - - * bootloader.pm (suggest, add_kernel): much cleanup - - * diskdrake.pm: fix call to fileshare_config - -2001/12/05 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: updateed logo - -2001/12/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: - - fix problems with sockets not initialized (disabling - hotplug support -> cardmgr handles sockets) - - fix problems with PCMCIA net adapters now using PCI - modules, by adding PCMCIA base code in `network.img' - -2001/12/05 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: no need to give kernelVersion to bootloader::suggest - - * pkgs.pm (selectPackage): hard coded preference to simple kernel - - * install_any.pm (kernelVersion): looks at /boot/vmlinuz - - * diskdrake.pm: fix call to fileshare_config - - * steps.pm: createBootdisk now after setupBootloader (together with dumber - install_any::kernelVersion) - - * network/tools.pm: fix missing ";" (thanks to Robert Fox) - - * bootloader.pm (suggest, add_kernel): much cleanup - - * fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount - -2001/12/05 sdupont - - * pixmaps/backup_bot2.png: update pixmaps - - * standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ? - done : bzip2 backup - merge - -2001/12/04 dam's <damien@mandrakesoft.com> - - * standalone/drakbackup: corrected pixmap path - corrected pixmap path - - * Makefile.config: added drakbackup drakfont - -2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in - report.bug - - * mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter - versions of automatic keywords to beat problems with very long kernel - commandlines - - * install_interactive.pm: try to not get something poorly wrapped - - * c/stuff.xs.pm: floppy_info: add missing close(fd) - -2001/12/04 Pixel <pixel@mandrakesoft.com> - - * network/smb.pm: cleaner smbclient call - - * install_steps.pm: re-enable supermount by default - -2001/12/04 sdupont - - * pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors - problems. - - * standalone/drakbackup: bzip2 ok for compression to see: decomp without - pbs whith tar.gz and tar.bz2 - todo: update mode -> decomp + update tar file + recomp - -2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_interactive.pm: try to not get something poorly wrapped - -2001/12/04 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: re-enable supermount by default - - * network/smb.pm: cleaner smbclient call - -2001/12/04 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fix bad parsing of package to copy (when one doen't - exist anymore) in - postinstall_rpms directory. - -2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_interactive.pm: try to not get something poorly wrapped - -2001/12/04 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: re-enable supermount by default - - * network/smb.pm: cleaner smbclient call - -2001/12/04 dam's <damien@mandrakesoft.com> - - * network/network.pm: additional package for wlan - - * network/tools.pm: corrected pipe reading - -2001/12/04 François Pons <fpons@mandrakesoft.com> - - * any.pm: make sure lilo is installed on automatic mode. - - * install_any.pm: fix bad parsing of package to copy (when one doen't - exist anymore) in - postinstall_rpms directory. - -2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_interactive.pm: try to not get something poorly wrapped - - * mdk-stage1/modules.c: fpons is a sucking chief - - * modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl, - mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c: - support install from USB CDROMS (using usb-storage) - -2001/12/04 Pixel <pixel@mandrakesoft.com> - - * network/smb.pm: cleaner smbclient call - -2001/12/04 sdupont - - * standalone/drakbackup: last update... for cooker - drakbackup deamon -> ok - drakbackup cvs -> to do (only for /etc) - drakbackup wizard -> only last step - drakbackup cd -> device detection and ask for only iso file. - drakbackup net -> do rsync - drakbackup begin -> todo : update initial message - update help and about. - -2001/12/04 dam's <damien@mandrakesoft.com> - - * network/network.pm: additional package for wlan - -2001/12/04 François Pons <fpons@mandrakesoft.com> - - * any.pm: make sure lilo is installed on automatic mode. - - * mdk-stage1/modules.c: fixed gégé sucking. - -2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules.c: fpons is a sucking chief - -2001/12/04 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/modules.c: fixed gégé sucking. - -2001/12/04 sdupont - - * standalone/drakbackup: update... - -2001/12/03 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: removed use gtk - -2001/12/03 François Pons <fpons@mandrakesoft.com> - - * tools/updatehdlist: initial revision, simple way to update a local set - of medium from /RPMS. - -2001/12/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules.c: typo of last commit (unused variable -> could not - compile) - -2001/12/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian - and Spanish files - -2001/12/03 sdupont - - * standalone/drakbackup: update - option step. - write other file content. - restore gi. - -2001/12/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2001/12/01 sdupont - - * standalone/drakbackup: do not include browser cache. - -2001/11/30 François Pons <fpons@mandrakesoft.com> - - * docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long) - -2001/11/30 gbeauchesne - - * partition_table_gpt.pm: - - cleanups from mainline - - * modules.pm: Suckiness fixes from mainline (gc): - - Do parse /proc/modules in reverse order - - Fix "convert old scsi_hostadapter's to new probeall" scheme - - * bootloader.pm: - - Don't forget to link the initrd to the real image in /boot/efi/ too - - Remove DEBUG printouts in install_efi_boot_menu - -2001/11/30 Pixel <pixel@mandrakesoft.com> - - * network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake, - Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake - --fileshare, fix smb import - -2001/11/30 sdupont - - * pixmaps/backup_left2.png: drakbackup pixmap - - * standalone/drakbackup: backend mode-> ok for hd - we can use drakbackup !. - todo : - backend mode: - - net - - cd - - advanced mode: - - device detection (cd writer) - - wizard: - - end of this step. - - gi: - - option step in adnanced step to choice - for example tar.gz or tar.gz2 ... - update - restore step 1 & 2. - adv step -> ok - todo: wizard ... - little update! - - variables correction in advanced step. - wizard user question, sys question & daemon - -2001/11/29 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * share/rpmsrate: Remove linux_logo - -2001/11/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: add wvlan_cs - - * mdk-stage1/modules.c: remove unneeded handling of "alias - scsi_hostadapter" - - * mdk-stage1/stage1.c: add another expert_third_party_modules at the end - of enabling-pcmcia-stuff - -2001/11/29 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: remove the export tree for nfs/smb feature, remove some - test code - tentative version with export/import nfs/smb tree (committed to have it - in CVS as the export tree is already deprecated) - - * standalone/fileshareset: - - allow root to export everything - - remove empty mntpoint (from smb) - -2001/11/29 sdupont - - * standalone/drakbackup: just update.... - advanced: users correction during save. - user pass, user login, path to save local or on host - combo for network protocol. - wizrad: already to do! - CDRW burn: todo: devices detection (see to_fond_cd). - code cleaning. - - * standalone/drakfont: cleanning code. - -2001/11/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: - - fix pixel sucks of not parsing /proc/modules in - reverse order - - be more in sync regarding names of pcmcia drivers - - * any.pm: add modules.conf in report.bug - -2001/11/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file - -2001/11/28 Pixel <pixel@mandrakesoft.com> - - * modules.pm (read_conf): fix "convert old scsi_hostadapter's to new - probeall" - - * standalone/drakbackup: make check_what_user works - - * standalone/fileshareset: better description - gr_mem in getgrent is space separated, not comma separated - add samba handling. Should be finished now :) - -2001/11/28 sdupont - - * pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps. - - * standalone/drakbackup: no important changement! - clean code - update! - for gc & Warly: some fixes, correction of advanced, wizard and after - advanced steps. - the user have a better gestion during advanced step, the protocols ftp, - sftp, scp, rsync - are now include in advanced step..... etc ;-) - todo: when checkbuttonbox are clicked for user choice set it to 0 or 1 - juste after. - clean code. - new after advanced step, correction of checkbuttons problems & new - pixmaps. - -2001/11/27 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake.png: updated, cooker style - -2001/11/27 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: avoid problem of array reference badly evaluated. - -2001/11/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * tools/mailchangelog.pl: beurk - changelog is at linux-mandrake not mandrakesoft - - * install_steps.pm: i810 -> no FB at boot - -2001/11/27 Pixel <pixel@mandrakesoft.com> - - * partition_table_gpt.pm (generate_guid): cleanup - - * any.pm (setupBootloader): s/last/return/ - -2001/11/27 sdupont - - * standalone/drakbackup: advanced step... - update. - advanced mode ... and ... - read and use user list correctly, advanced step user list. - - * pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for - drakbackup. - -2001/11/26 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works - - * tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works - stage1/stage2 of rtl8139 didn't work - -2001/11/26 dam's <damien@mandrakesoft.com> - - * common.pm, my_gtk.pm: new features for new mcc - -2001/11/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing - of - auto_inst.cfg is not possible - -2001/11/26 Pixel <pixel@mandrakesoft.com> - - * install2.pm: add $o->{excludedocs} feature - - * Makefile.drakxtools: remove unneeded files (*.bs and .exists) - - * interactive_gtk.pm: cleanup - -2001/11/26 sdupont - - * standalone/drakbackup: new gi, advanced step. - update. - gawk cmds. - better use for read and save conf. file now on - /etc/draxtools/drakbackup/drakbackup.cfg - - * pixmaps/backup_hd.png, pixmaps/backup_options.png, - pixmaps/backup_net.png, pixmaps/backup_time.png: png files for - DrakBackup. - -2001/11/25 Pixel <pixel@mandrakesoft.com> - - * standalone/fileshareset: first version. for the moment, only nfs. - -2001/11/25 sdupont - - * standalone/drakbackup: update of read_conf_file and default mode. - -2001/11/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po, share/po/es.po: updated Spanish and Danish files - -2001/11/24 sdupont - - * standalone/drakfont: about... - - * standalone/drakbackup: update - update gi ,build of system, user, other, options interfaces. - advanced step. - -2001/11/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: package for pcmcia is now called "pcmcia-cs" - - * any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor - /var/lib/pcmcia/stab - yes it probably doesn't bring anything valuable but it's - how life is :-) - -2001/11/23 sdupont - - * standalone/drakbackup: radio buttons & information message. - change gi interface, include help, about and pixmaps (backup_*.png on - standalone/pixmaps directory) - -2001/11/22 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: removed loading of agpgart module for i810 card. - -2001/11/22 sdupont - - * standalone/drakfont: about button & GPL license. - - * standalone/drakbackup: update gi. - TODO: separate all the boxes. - include wizard and advanced in pixmaps. - update - notebook gi. - -2001/11/21 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2, - mdk-stage1/init-data/msgboot-blank.img.bz2, - mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg - - * Xconfigurator.pm: hack for SiS 640 for laptop. - - * install_any.pm: fixed install_urpmi to build a correct urpmi db. - -2001/11/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: i810fb - migrate pcmcia in drakx to use in-kernel version (only - for 2.4, though --> pcmcia in 2.2 no longer supported) - - * install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in - drakx to use in-kernel version (only - for 2.4, though --> pcmcia in 2.2 no longer supported) - - * install2.pm: i810fb - - * mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c, - mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c, - mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile, - mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h, - mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel, - patching untouched imported - sources from pcmcia-cs-3.1.29, to ease further updates of vendor - code (start from a clean pcmcia_ subdir) - -2001/11/21 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use - the simple - one, so that 'simple' is the only one required when someone modifies - %fsedit::suggestions - -2001/11/20 gbeauchesne - - * partition_table.pm: - - Add isEfi() to isOtherAvailableFS() test so that install doesn't - suggest - to format /boot/efi by default. That way, we could preserve (shame on - us) - EFI boot partition generated by Windows XP 64 bits... - -2001/11/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c, - mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h, - mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h, - mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h, - mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h, - mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h, - mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h, - mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h, - mdk-stage1/pcmcia_/probe.c: Initial revision - version 3.1.29 - -2001/11/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive_stdio.pm: for po i can't use $ for string interpolation - -2001/11/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * services.pm, standalone/scannerdrake: Corrected English errors - - * share/po/hu.po, share/po/cs.po: updated pot file - updated Czech and Hungarian files - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po: - updated pot file - -2001/11/19 Pixel <pixel@mandrakesoft.com> - - * any.pm (setupBootloader): fix typo - (setupBootloader): fix typo - -2001/11/19 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Last correction was wrong, reverted it. - -2001/11/19 yduret - - * standalone/scannerdrake: added dynamic support - -2001/11/16 Pixel <pixel@mandrakesoft.com> - - * any.pm: syntax cleanup - - a little cleanup - - in case there is both scsi and ide hard drives, go to expert - questions - directly (it would need a semi_auto asking on which drive the bios - boots...) - -2001/11/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help file - - * keyboard.pm: Added Swedish dvorak keyboard - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file - -2001/11/12 sdupont - - * standalone/drakbackup: new backup tool. - backend_mode with options. - begin interactive mode. - -2001/10/29 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: code correction - -2001/10/29 gbeauchesne - - * rescue/list.ia64: - - Add xfs_repair and efibootmgr - -2001/10/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd - - * modules.pm: here too - CDCEther looks good, I add it - -2001/10/29 Pixel <pixel@mandrakesoft.com> - - * tools/pcmcia_config.patch: adapt for new pcmcia-cs - -2001/10/29 sdupont - - * standalone/drakfont: Copyright (C) - correction of warning & code cleaning. - the end.... i think... - updated - uninstall interface & progress bar - uninstall interface : lists & progress bar - new progress bar update - todo: second list - -2001/10/28 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: cleaning - -2001/10/27 daouda - - * devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module - - * share/rpmsrate: - - increase icewm weight. - -2001/10/26 dam's <damien@mandrakesoft.com> - - * standalone/drakautoinst, standalone/drakfont: progress bar hack - -2001/10/26 Pixel <pixel@mandrakesoft.com> - - * mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools - - * partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end - on GPT - -2001/10/26 sdupont - - * standalone/drakfont: updated. - search correct progress bar mode implementation. - updated - fix some bugs & interface progress implementation. - TODO: - progress before backend. - search if directory already exist before custom install. - -2001/10/25 dam's <damien@mandrakesoft.com> - - * standalone/drakautoinst: simple variables handled, code compression. - The new and shiny drakautoinst is coming. P|-|34R - The new drakautoinst is coming. P|-|34R - - * pixmaps/mdk_logo.png: additional logo - - * standalone/drakfont: code correction - -2001/10/25 sdupont - - * standalone/drakfont: merge differents versions. - file sector, list of fonts for advanced install... - applications choice, license widget, help widget. - -2001/10/24 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: updated - updated - updated, lot of bugs. - updated - - * my_gtk.pm: added set_editable - -2001/10/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h, - mdk-stage1/.cvsignore, rescue/install_bootloader, - rescue/tree/etc/rc.sysinit, rescue/Makefile, - mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile, - rescue/tree/etc/issue, rescue/make_rescue_img, - mdk-stage1/newt-frontend.c: - - add a GUI to the rescue - - provide guessmounts with better efficiency and output, go to - console, and reboot - - provide install_bootloader which runs lilo from /mnt if it seems - safe - - add lsparts to rescue, which prints partitions with detected types - -2001/10/24 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm: replace /initrd with /lib/initrd - (hds): in case of GPT, allow ext2 to be replaced by any kind of - partitions (esp. EFI) - - * partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm, - partition_table_raw.pm: add methods first_usable_sector and - last_usable_sector - - * fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd - -2001/10/24 sdupont - - * standalone/drakfont: scroll - ` - import_status & progress. - gi update. - -2001/10/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * services.pm: tagged as translatable some left out strigns - -2001/10/23 sdupont - - * standalone/drakfont: gi update - doc and progress bar. - gui: install from directory - gui supported. - -2001/10/23 yduret - - * share/po/fr.po: fixed fohtes grammar - -2001/10/22 dam's <damien@mandrakesoft.com> - - * network/tools.pm: speedtouch config : added usa vpi vci - -2001/10/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules.c: oops forgot to umount after "updatemodules"... - -2001/10/22 Pixel <pixel@mandrakesoft.com> - - * rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...) - -2001/10/21 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed connection device setting for "oki4w" driver. - -2001/10/19 gbeauchesne - - * partition_table_gpt.pm: - - Use /dev/random through devices::make() instead of /dev/urandom - - Localize file descriptor - - Capitalize error message if no /dev/random found - - * partition_table.pm: - - s/Win98 FAT32/FAT32/ - - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/ - - Add "FAT32" to @important_types for IA-64 & /boot/efi - -2001/10/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stdio-frontend.c: small fix - -2001/10/19 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm: OOize can_raw_add - - * partition_table.pm: handle empty $hd->{primary}{raw} (happens with no - partitions on ia64) - - raw_add, can_raw_add moved to partition_table_raw - - using raw_removed - - * partition_table_dos.pm: better handling of CHS overflow (mainly for non - cylinder-boundary aligned part (like ia64)) - - * partition_table_raw.pm (adjustEnd): in case the end is totalsectors, - don't adjust since totalsectors / cylinder_size may not be an integer - (zero_MBR): defaults to GPT on ia64 - (raw_add, can_raw_add, raw_removed): created, can now be overloaded in - partition_table_*.pm's - (get_geometry): keep the total_sectors as given by c::total_sectors, - don't try to recompute it based on nb_cylinders (for hds where - total_sectors is not a multiple of nb_cylinders) - - * common.pm: cleanup - - * partition_table_gpt.pm: fix ending is last sector, not next one - add TODO for partition entry guid - - writing partition table now works - - creating a new partition table now works (except GUIDs generation) - -2001/10/18 dam's <damien@mandrakesoft.com> - - * network/tools.pm: corrected GET_FL and co - -2001/10/18 François Pons <fpons@mandrakesoft.com> - - * standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now - use rgb.txt instead). - -2001/10/18 Pixel <pixel@mandrakesoft.com> - - * partition_table_gpt.pm: - - add checksum verif on partition entries - - detect the type of partition since the partition table types seem - quite poor - read part of GPT partition table working - - * fsedit.pm: - - add checksum verif on partition entries - - detect the type of partition since the partition table types seem - quite poor - - * partition_table.pm: read part of GPT partition table working - shorter GPT name - - * detect_devices.pm: safer modprobe ide-floppy - -2001/10/18 sdupont - - * standalone/drakfont: change Fontmap ghostscript file. - drakfont support now .gsf fonts - end of backend...... - update - -2001/10/17 dam's <damien@mandrakesoft.com> - - * standalone/draksec: typo - -2001/10/17 sdupont - - * standalone/drakfont: implementation of type1 fonts removing. - ghostscript, xfs and staroffice tested and supported. - -2001/10/16 dam's <damien@mandrakesoft.com> - - * standalone/draksec: correct bad level display - - * standalone/interactive_http/Makefile: makes rpmlint happy - -2001/10/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: print checks - - * rescue/tree/etc/rc.sysinit: better phrasing - -2001/10/16 Stew Benedict <sbenedict@mandrakesoft.com> - - * rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl, - rescue/list.ppc: typo in update kernel by /me - fine-tune sanity_check for ppc - move /dev/nvram from list.ppc to devices.pl - -2001/10/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2001/10/15 yduret - - * scanner.pm: wonderful perl forgotten - -2001/10/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also - supported - -2001/10/12 sdupont - - * standalone/drakfont: support all installations, and support xfs, - ghostcript, staroffice. - todo aplli: openoffice, gimp, abiword, netscape & other browsers... - todo or to see: --strong ttmkfdir -c ??? - emd of backend.. - -2001/10/11 dam's <damien@mandrakesoft.com> - - * standalone/draknet: multiple card configuration bug corrected. - allelluia. - - * network/tools.pm: aded use c - - * standalone/drakfont: code review - -2001/10/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again - -2001/10/11 Pixel <pixel@mandrakesoft.com> - - * install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom - -2001/10/11 sdupont - - * docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf, - docs/drakfont/drakfont.dvi: clean directory.. - - * docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia, - docs/drakfont/dia_srcs/drakfont_uninstall.dia, - docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files... - - * standalone/drakfont: improved.... - improved && implement remove fonts for xfs - improved - improved - optimisation - correction of option install --replace - dialog of install options - correction of install option. - - * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg, - docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg & - ps with -kb option - clean...2 - -2001/10/10 dam's <damien@mandrakesoft.com> - - * standalone/drakfont: typo - improved options handling - - * standalone/net_monitor: ergo and features improvments, pipe handling - correction - - * network/tools.pm: updated - -2001/10/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language - -2001/10/10 Pixel <pixel@mandrakesoft.com> - - * interactive.pm: normalize the default type entry ("entry") - - * interactive_gtk.pm: fix typo (on clicked_may_quit) - -2001/10/10 sdupont - - * standalone/drakfont: option replace for "install from" & - windows_import... - update install dir - better for --install - new version of drakfont. in perl langage. - - * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux, - docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf, - docs/drakfont/drakfont.tex, docs/drakfont/Makefile, - docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi, - docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs - drakfont - -2001/10/10 yduret - - * standalone/scannerdrake: first apparition on earth.. - - * Makefile.config: added scannerdrake - -2001/10/09 dam's <damien@mandrakesoft.com> - - * network/tools.pm: removed trash - connection test is now in background, corrects the interface freeze - problem - - * pixmaps/net_u.png: new pixmap for draknet/net_monitor - - * standalone/net_monitor, standalone/draknet: connection test is now in - background, corrects the interface freeze problem - -2001/10/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated Hungarian file - -2001/10/09 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: fix detecting read-only drives (like memory-sticks) - - * partition_table.pm: make perl_checker happy - - * partition_table_raw.pm: fix detecting read-only drives (like - memory-sticks) - make perl_checker happy - - * modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care - of usb-storage if possible, so that patch on usb floppy works - -2001/10/09 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux - keycodes on PPC, add additional Apple modelines - - * install_steps_interactive.pm: re-enable PPC bootloader setup - -2001/10/08 dam's <damien@mandrakesoft.com> - - * c/stuff.xs.pm: added FL_GET and FL_SET - -2001/10/08 François Pons <fpons@mandrakesoft.com> - - * modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as - they have been - removed from the skip list for stage1. - - * rescue/tree/etc/oem: added silly modification to avoid using more than 7 - partition for DAC960 (/home - and /var are not created in the current state). - -2001/10/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: ia64 - - * mdk-stage1/Makefile: 8.1 -> cooker - -2001/10/08 Pixel <pixel@mandrakesoft.com> - - * modules.pm, partition_table.pm: yet a few other ataraid cases - -2001/10/06 Stew Benedict <sbenedict@mandrakesoft.com> - - * partition_table_raw.pm, partition_table.pm: updates to accomodate IBM - PPC systems with DOS partition table - -2001/10/05 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: added (missing) creation of - /hd/boot/grub/device.map (needed for - CompactSmartArray). - -2001/10/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: kdegames : 2 -> 4 - -2001/10/04 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fix (work around) parted problem when it refuse to - use all disk space for - partition. - added another psacct log file in touch. - fixed typo on scalar reference for psacct bug. - updated with 8.1 OEM ProSuite. - - * tools/oem-prepare: updated with 8.1 OEM ProSuite. - -2001/10/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po: updated Hungarian file - -2001/10/04 Pixel <pixel@mandrakesoft.com> - - * partition_table_dos.pm: is little-endian, so use "V" instead of "I" - -2001/10/03 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: synced with oem script. - removed 3D games not installed by default. - - * rescue/tree/etc/oem: fixed typo in produced patch. - added extension to pro suite CD (added kernel-enterprise to possibly - installable - and install kernel22). - removed 3D games not installed by default. - added missing xmms-arts. - allow halting. - -2001/10/03 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm: yet another ataraid support patch - -2001/10/02 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fix previous hack. - added hack to do "/sbin/depmod -a" for NVIDIA driver. - -2001/10/02 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/probing.c: new pci-ids.h - - * mdk-stage1/usb-resource/update-usb-ids.pl: better look - - * share/po/fr.po: small fix - - * standalone/drakgw: don't call pkgs_install when no package needs to be - installed - -2001/10/02 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm: bloody ataraid detection - - * devices.pm: ataraid devices support - -2001/10/01 François Pons <fpons@mandrakesoft.com> - - * share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT. - - * rescue/tree/etc/oem: added CHARSET support, removed kernel22 and - kernel-enterprise from list of - package installable in oem mode, added possibility to set language on - /etc/oem - script invocation. - - * install_steps_interactive.pm: avoid chooseCD on oem install. - - * install_steps_gtk.pm: avoid asking for changing CD on oem install. - - * install_any.pm: use $boot_medium for default medium in oem install, - avoid using kernel22 or - kernel-enterprise in oem install (space available is too tight on CD oem - version). - - * tools/oem-prepare: synced with oem script. - -2001/10/01 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects - what's in the marfiles - -2001/10/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bg.po: updated Bulgarian file - -2001/09/29 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * docs/README: New adress where to find the kernel BOOT - -2001/09/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2001/09/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/drvinst: don't install usb keyboard drivers more than once - try to fix usb keyboards - -2001/09/27 kjx - - * share/po/zh_CN.po: translating - -2001/09/26 gbeauchesne - - * install_any.pm: - - Suggest /boot/efi on IA-64 for the first VFAT partition found, - instead - of /mnt/windows - - * bootloader.pm: - - bootloader.pm (suggest): don't search for dos (or windows) boot - partition - on IA-64 since ELILO can only boot Linux. - - bootloader.pm (write_lilo_conf): don't cry if we don't have - /boot/boot.b - or boot/message on IA-64. - - * rescue/list.ia64: - - Add file list for "rescue" disk - - * share/list.ia64, partition_table.pm: - - partition_table.pm: Add XFS suggestion for IA-64 - - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS - -2001/09/25 baudens - - * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ - Remove totally crazy translation. - Translators, please use your brain! - -2001/09/25 gbeauchesne - - * partition_table.pm: - - Add ReiserFS and Ext3fs entries for IA-64 - -2001/09/25 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (naughtyServers): cleanup comments - -2001/09/25 warly - - * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is - installed for newbie and drakfirsttime does not fail. - put gtk-themes to 4 so that it is installed for newbie and drakfirsttime - does not fail. - -2001/09/25 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: allow non ejectable medium to allow all - hdlists on the bootable medium. - make current boot medium already selected if multiple hdlist are on this - boot medium. - -2001/09/25 warly - - * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is - installed for newbie and drakfirsttime does not fail. - put gtk-themes to 4 so that it is installed for newbie and drakfirsttime - does not fail. - -2001/09/24 dam's <damien@mandrakesoft.com> - - * share/po/fr.po: corrected translation - -2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h, - mdk-stage1/disk.c: hd.img now detects partition types... backport from - DrakX :-) - -2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated Dutch file - -2001/09/24 Pixel <pixel@mandrakesoft.com> - - * fs.pm (mount_part): fix for iso loopback mounted - - * share/po/fr.po: fix - -2001/09/24 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/isdn.pm: type assignation bug fix - corrected type assignation - - * share/po/fr.po: corrected bad translation - - * standalone/draknet: corrected type assignation - -2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * bootloader.pm: fix add_append (there was a ) at the end of the parameter - value) - -2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean - and Turkish files - -2001/09/24 Pixel <pixel@mandrakesoft.com> - - * fs.pm (mount_part): fix for iso loopback mounted - - * share/po/fr.po: fix - -2001/09/24 warly - - * share/rpmsrate: lower arkeia - -2001/09/24 dam's <damien@mandrakesoft.com> - - * modules.pm: corrected isdn firmware - - * network/adsl.pm, network/isdn.pm: type assignation bug fix - corrected type assignation - - * share/po/fr.po: corrected bad translation - - * standalone/draknet: corrected type assignation - -2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * bootloader.pm: fix add_append (there was a ) at the end of the parameter - value) - -2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean - and Turkish files - -2001/09/24 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix small error merging existing fstab - - * share/po/fr.po: fix - - * diskdrake.pm: do not propose to mount/umount removable medias (disabled - for now) - - * diskdrake_interactive.pm: hide the supermount checkbox in standalone - -2001/09/24 warly - - * share/rpmsrate: lower arkeia - -2001/09/24 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm, network/ethernet.pm: bug fix - - * modules.pm: corrected isdn firmware - - * network/isdn.pm, network/adsl.pm: type assignation bug fix - corrected type assignation - - * standalone/draknet: corrected type assignation - - * install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd - during install - -2001/09/24 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many - problems reported with it. - - * share/rpmsrate: allow rpm build for non expert who choose development. - - * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed - packages). - -2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean - and Turkish files - -2001/09/24 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix small error merging existing fstab - add "iocharset=" for cdrom - - * install_steps.pm: - - disable supermount by default - - cleanup nsswitch.conf wins removing - - * diskdrake.pm: do not propose to mount/umount removable medias (disabled - for now) - - * diskdrake_interactive.pm: hide the supermount checkbox in standalone - -2001/09/24 siegel - - * share/po/de.po: new german version - -2001/09/24 warly - - * share/rpmsrate: lower arkeia - -2001/09/24 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm, network/ethernet.pm: bug fix - -2001/09/24 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many - problems reported with it. - - * share/rpmsrate: allow rpm build for non expert who choose development. - removed any reference to XFree86-glide-module or Glide_XXX packages. - - * pkgs.pm: sort mediums by number, in allMediums() else they will be in - hash keys orders in - install_steps_interactive::chooseCD(). - - * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed - packages). - -2001/09/24 Pixel <pixel@mandrakesoft.com> - - * fs.pm: add "iocharset=" for cdrom - - * install_steps.pm: - - disable supermount by default - - cleanup nsswitch.conf wins removing - -2001/09/24 François Pons <fpons@mandrakesoft.com> - - * share/rpmsrate: removed any reference to XFree86-glide-module or - Glide_XXX packages. - - * pkgs.pm: sort mediums by number, in allMediums() else they will be in - hash keys orders in - install_steps_interactive::chooseCD(). - -2001/09/24 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: File permission settings during install were not done. - Fixed. - -2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: misc typo correction - - * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode - -2001/09/23 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm: add "Graphical Environment" in meta_class server - - * share/rpmsrate: simplify (for the moment) - do not force X flag, have it selected for any "Graphical Environment" - - * share/compssUsers, install_any.pm: do not force X flag, have it selected - for any "Graphical Environment" - -2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode - -2001/09/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file - - * share/po/zh_TW.po: updated Chinese file - -2001/09/23 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm: add "Graphical Environment" in meta_class server - - * fsedit.pm: add magic SWAPSPACE2 - - * bootloader.pm: allow bootloader on fat partitions - - * share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag, - have it selected for any "Graphical Environment" - -2001/09/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: version is 8.1 - -2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bs.po: updated Bosnian file - -2001/09/22 Pixel <pixel@mandrakesoft.com> - - * fs.pm, install2.pm: - - cleanup noatime option setting - - cleanup exec option setting (must noexec => 0 instead of exec => 1) - - * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu - -2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bg.po: updated Bulgarian file - -2001/09/22 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu - -2001/09/22 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added support for automatic /dev/... file permissions - setting by devfsd. - Improved matching of auto-detection results with database entries. - Given hint to the user to select the correct model when matching fails. - - * printer.pm: Added support for automatic /dev/... file permissions - setting by devfsd. - -2001/09/21 François Pons <fpons@mandrakesoft.com> - - * detect_devices.pm: avoid detecting plip for live upgrade. - -2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some - functionality is lost - small fix for "vn" keyboard (enable toggle key) - - * share/po/ko.po: updated Korean file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - - * printerdrake.pm: small fix - -2001/09/21 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: When one changes the driver of a freshly - added printer, the cursor was not pointed to the old driver, fixed. - Fixed paper size not set according to chosen language during - installation. - -2001/09/21 dam's <damien@mandrakesoft.com> - - * network/adsl.pm: typo - -2001/09/21 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: reworked medium management. - moved com_license to parent package (as code that show the license is - now - available even for non gtk install). - - * Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade. - - * pkgs.pm, install_any.pm: reworked medium management. - - * detect_devices.pm: avoid detecting plip for live upgrade. - - * install_steps_interactive.pm: avoid keeping testing code. - reworked medium management. - added code to support changeable cdrom, set a unique copy of license for - installing commercial application as package variable (exported). - -2001/09/21 gbeauchesne - - * share/po/no.po: remove trailing '\n' - -2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hu.po, share/po/no.po: updated pot file - updated pot file - updated Norwegian and Hungarian files - updated pot file - - * help.pm: updated help file - - * share/po/help_xml2pm.pl: updated pot file - - * printerdrake.pm: small fix - changed text strings to be more translator friendly - (NEVER EVER cut a phrase) - - * share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file - updated pot file - corrected extra \n - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - updated pot file - updated pot file - - * keyboard.pm: adapted keyboard priority numbers (it is useless to give a - multichoice with a - value higher than 90) - - * share/po/zh_TW.po: updated pot file - updated pot file - -2001/09/21 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm: write password in lilo.conf even if it's also done by - msec, otherwise lilo will fail with restricted only - - * install_steps.pm: Ensure $o->{superuser}{name} is temporary - - * share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for - libsafe and kernel22-secure - -2001/09/21 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Added a forgotten "_( ... )". - -2001/09/21 warly - - * share/rpmsrate: add gnomemeeting and openmcu - -2001/09/20 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm (partition_with_diskdrake): ensure the $::expert - flag modifications in - diskdrake do not escape from diskdrake - - * install_steps_interactive.pm (choosePartitionsToFormat): do not propose - check bad blocks for xfs and jfs - -2001/09/20 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: don't reapply the conf, if already applied. - usefull for dhcp, because the network should be restarted after - configured - - * network/adsl.pm: test if microcode is there - - * bootlook.pm: removed blocking die - -2001/09/20 fcrozat - - * share/rpmsrate: Add gnome-user-docs to GNOME install - Install Mdk eazel engine for gnome - -2001/09/20 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: take care not probing in /dev/ for finding package to upgrade, - this cause - problem in live_upgrade. - - * Xconfigurator.pm: added VideoRam for ET 6x00 card. - - * network/netconnect.pm: tried to fix damien sucking. - -2001/09/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: misc - -2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated Turkish file - - * share/po/cs.po: updated Czech file - - * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish, - Chinese and Dutch files - -2001/09/20 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm (partition_with_diskdrake): ensure the $::expert - flag modifications in - diskdrake do not escape from diskdrake - - * share/rpmsrate: raise i18n fonts - - * fsedit.pm (hds): do a get_major_minor where needed - - * lang.pm: replace xcin by chinput as per Alex request - - * install_steps_interactive.pm (choosePartitionsToFormat): do not propose - check bad blocks for xfs and jfs - -2001/09/20 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed flow of the program for the "recommended" mode of - the installation. - -2001/09/20 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: don't reapply the conf, if already applied. - usefull for dhcp, because the network should be restarted after - configured - - * mouse.pm: text positionning - - * standalone/net_monitor: less gethostbyname - -2001/09/20 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: take care not probing in /dev/ for finding package to upgrade, - this cause - problem in live_upgrade. - - * network/netconnect.pm: tried to fix damien sucking. - -2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish, - Chinese and Dutch files - -2001/09/20 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: raise i18n fonts - s/telnet-server/telnet-server-krb5/ - - * fsedit.pm (hds): do a get_major_minor where needed - - * fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type - - * lang.pm: replace xcin by chinput as per Alex request - - * printerdrake.pm: back out the modif from till as asked by till - -2001/09/20 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Make it possible to configure more than 1 printer in a - "recommended" mode installation. - -2001/09/19 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network - restart at better place - -2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: chromium and tuxracer don't work well with Riva - -2001/09/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/it.po: updated pot file - updated help xml - - * help.pm: updated help file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, - share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, - share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, - share/po/af.po: updated pot file - - * share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po: - updated help xml - - * share/po/wa.po: updated pot file - updated pot file - -2001/09/19 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network - restart at better place - -2001/09/19 fcrozat - - * share/rpmsrate: Add mdk-eazel-engine - - * share/po/fr.po: Fix french mistakes - -2001/09/19 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: added code to check if package are really installed. - - * Xconfigurator.pm: Rage 128 doesn't like XF3 at all. - make only bad card Riva128 for testing XF4. - Riva128 is now a bad card. - -2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/init.c: raklet quoting - - * share/rpmsrate: chromium and tuxracer don't work well with Riva - -2001/09/19 Pixel <pixel@mandrakesoft.com> - - * loopback.pm (create): don't use seek to create big files otherwise you - get hole and - swapon doesn't like it - - * any.pm (ask_users): default icon "man" - - * lang.pm: compatibility with older $o->{lang} names (for auto_installs) - - * install2.pm: initial support for server install - compatibility with older $o->{lang} names (for auto_installs) - - * install_steps_gtk.pm: initial support for server install - - * printerdrake.pm: help perl_checker - - * pkgs.pm, share/rpmsrate, install_any.pm: - - gmc instead of nautilus for non-latin1 installs - - introduce CHARSET flag and use it - -2001/09/19 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Network is now only required (and checked) for remote - printers. - Several buglets fixed in remote CUPS server dialog. - - * printerdrake.pm: Removed a forgotten debug help line from the code. - Fixed typo in dialog text of high/paranoid security. - Network is now only required (and checked) for remote printers. - Several buglets fixed in remote CUPS server dialog. - -2001/09/18 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: don't ask to connect if lan or dhcp - -2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install2.pm: don't create bootdisk by default - - * share/po/fr.po: misc - -2001/09/18 Pixel <pixel@mandrakesoft.com> - - * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs) - - * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big - installs - -2001/09/18 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch - - * network/netconnect.pm: don't ask to connect if lan or dhcp - - * standalone/drakgw: debug - -2001/09/18 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: added X group with SYSTEM. - finally work arounded rpm bug by flepied. - - * detect_devices.pm: added back full pci probe for stage2 command lspci. - removed full pci probe for stringlist (used for generating report_bug). - - * install_steps_interactive.pm: now finally really fixed printer label in - summary dialog. - fixed printer description in summary (again). - fixed no printer displayed (at least, print Remote CUPS server). - - * commands.pm: make lspci a full pci probe instead of safe pci probe. - -2001/09/18 gbeauchesne - - * Xconfigurator.pm: - - Force XFree 4 on IA-64. No XFree 3.3.X there... - - * tools/ia64/elilo.efi: - - elilo 3.1 - -2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install2.pm: don't create bootdisk by default - - * standalone/drakautoinst: have "manual" and "replay" translated - - * share/po/fr.po: misc - -2001/09/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files - -2001/09/18 Pixel <pixel@mandrakesoft.com> - - * lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: - - remove ISO-8859-5, KOI8-R and KOI8-U - - cleanup packdrake extracting locales - - cleanup/fixes lang.pm - - * install_steps.pm: fix setting kdmrc for latin1 - - * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs) - - * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big - installs - -2001/09/17 François Pons <fpons@mandrakesoft.com> - - * rescue/list: updated for rpm 4.0.3. - - * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of - "rpm --root" but need more testing. - - * standalone/XFdrake: removed comment. - added support to configure NVIDIA driver if everything is correctly - installed. - -2001/09/17 Pixel <pixel@mandrakesoft.com> - - * fs.pm, fsedit.pm: - - '--' to separate options for supermount + small workaround (ro and - exec before --) - - fix nfs in manualFstab (for auto_installs, reported by David - Eastcott) - -2001/09/17 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written - in expert install. - -2001/09/17 dam's <damien@mandrakesoft.com> - - * network/network.pm: no expert mode needed to choose gateway - -2001/09/17 François Pons <fpons@mandrakesoft.com> - - * rescue/list: updated for rpm 4.0.3. - - * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of - "rpm --root" but need more testing. - - * printerdrake.pm: add eval around installing lexmark-driver - (proprietary). - - * Xconfigurator.pm: deactivating bad card test (too). - - * standalone/XFdrake: removed comment. - added support to configure NVIDIA driver if everything is correctly - installed. - -2001/09/17 odin - - * share/po/fr.po: updated fr.po - -2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting - English language but also euro symbol can choose it. - fixed Belgian keyboard - - * share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and - Wallon files; corrected error syntax in French file - - * lang.pm: Added choice of "English|Ireland (euro)" so people wanting - English language but also euro symbol can choose it. - -2001/09/17 Pixel <pixel@mandrakesoft.com> - - * fs.pm: - - '--' to separate options for supermount + small workaround (ro and - exec before --) - - fix nfs in manualFstab (for auto_installs, reported by David - Eastcott) - (mount): do not hand update /etc/mtab for nfs mounts, already done by - mount(8) - (set_default_options): disable iocharset= and codepage= for supermount - - * partition_table.pm (adjust_main_extended): do not use linux extended - - * detect_devices.pm (pci_probe): log full pci probes - - * standalone/drakbug_report: fix - - * fsedit.pm: - - '--' to separate options for supermount + small workaround (ro and - exec before --) - - fix nfs in manualFstab (for auto_installs, reported by David - Eastcott) - -2001/09/17 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written - in expert install. - Do not die when "chkconfig" fails (needed for "security_check"). - Added "-q" option to foomatic-configure (should not get interactive). - Added handling of high and paranoid security levels. - - * printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert - mode installation. - Added handling of high and paranoid security levels. - -2001/09/17 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: add eval around installing lexmark-driver - (proprietary). - -2001/09/17 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (pci_probe): log full pci probes - - * fs.pm (set_default_options): disable iocharset= and codepage= for - supermount - -2001/09/17 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: add eval around installing lexmark-driver - (proprietary). - -2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2001/09/17 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (pci_probe): log full pci probes - -2001/09/16 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 - - * pkgs.pm (read_rpmsrate): fix bug - -2001/09/16 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Fixed bug which prevented from printing the option list - during install. - Fixed bug which prevents printerdrake from running without PDQ - installed. - -2001/09/16 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 - more up to my need ALL flag in compssUsersChoice - remove auto-install special case (initialisation of compssUsersChoice) - - * share/rpmsrate: - - cleanup packages appearing twice in rpmsrate - - handle a few case of packages appearing twice - - special case for packages appearing in INSTALL section (flag - dropped) - - new special flag ALL for compssUsersChoice - - * pkgs.pm: more up to my need ALL flag in compssUsersChoice - - cleanup packages appearing twice in rpmsrate - - handle a few case of packages appearing twice - - special case for packages appearing in INSTALL section (flag - dropped) - - new special flag ALL for compssUsersChoice - - * rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from - MDK::Common - -2001/09/16 siegel - - * share/po/help_xml2pm.pl: added "systemitem" - -2001/09/16 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Fixed bug which prevents printerdrake from running without - PDQ installed. - -2001/09/16 dam's <damien@mandrakesoft.com> - - * mouse.pm, my_gtk.pm: bugfix + cosmetic changes - -2001/09/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: updated help.pm file - - * share/po/hu.po: updated Hungarian file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, - share/po/cs.po, share/po/af.po: updated pot file - -2001/09/16 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: "please click on ..." for removable, nfs, smb. - - * fsedit.pm: enhance lvm handling (mostly standalone) - - cleanup & enhance raid mdstat reading (now works with or without - devfs mounted) - - chunk size is buggy? - - * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 - more up to my need ALL flag in compssUsersChoice - remove auto-install special case (initialisation of compssUsersChoice) - use new mkdir_p, rm_rf and cp_af from MDK::Common - - * share/rpmsrate: - - cleanup packages appearing twice in rpmsrate - - handle a few case of packages appearing twice - - special case for packages appearing in INSTALL section (flag - dropped) - - new special flag ALL for compssUsersChoice - - * verify_c: add special case for c::to_utf8 - - * pkgs.pm: more up to my need ALL flag in compssUsersChoice - - cleanup packages appearing twice in rpmsrate - - handle a few case of packages appearing twice - - special case for packages appearing in INSTALL section (flag - dropped) - - new special flag ALL for compssUsersChoice - use new mkdir_p, rm_rf and cp_af from MDK::Common - - * services.pm, install2.pm, lang.pm, commands.pm, loopback.pm, - tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm, - network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm, - any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new - mkdir_p, rm_rf and cp_af from MDK::Common - - * diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly - standalone) - - * devices.pm (make): ensure it never returns a non-absolute name - (it happened with make("foo") when cwd=/dev and /dev/foo existed) - -2001/09/16 siegel - - * share/po/help_xml2pm.pl: added "systemitem" - added commet explainig that help.pm is automatically generated. - - * .cvsignore: added .*.sw? for vim users - -2001/09/16 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Added possibility to list command line - options for the printers and to give the users help for printing - Fixed bug of sometimes appearing the wron dialog after printing test - pages - -2001/09/15 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix options appearing twice in fstab - - * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc - - * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk - installs) - - * install_steps_auto_install.pm (enteringStep): do not translate in - ja|ko|zh - -2001/09/15 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix options appearing twice in fstab - - * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc - - * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk - installs) - - * install_steps_auto_install.pm (enteringStep): do not translate in - ja|ko|zh - -2001/09/15 civileme - - * help.pm: Added a dialog in English for users selecting a printing system - since no other - OS seems to offer such a choice during install. - -2001/09/15 dam's <damien@mandrakesoft.com> - - * standalone/draknet: better connection testing - - * network/tools.pm: more timeout - - * network/adsl.pm: avoid asking 2 times to restart the ethernet card - - * mouse.pm: readded darea realization - -2001/09/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/rpmsrate: make gtk-themes installed when Gnome is choosen - - * share/po/es.po: updated Spanish file - - * share/po/wa.po, share/po/hu.po: updated Hungarian file - -2001/09/15 Pixel <pixel@mandrakesoft.com> - - * Makefile.config, tools/Makefile: add aewm-drakx - - * install_steps_gtk.pm: makes cancel on mouse selection works even better - - add and use aewm-drakx - - add some "skip" title on help/logo/steps windows so that aewm-drakx - know they don't need keyboard focus - - add some more title to ease debugging (when aewm-drakx is in debug - mode) - - * install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c, - tools/aewm-drakx/README: - - add and use aewm-drakx - - add some "skip" title on help/logo/steps windows so that aewm-drakx - know they don't need keyboard focus - - add some more title to ease debugging (when aewm-drakx is in debug - mode) - - * any.pm: i18n kdmrc - fix user icons choice - - add and use aewm-drakx - - add some "skip" title on help/logo/steps windows so that aewm-drakx - know they don't need keyboard focus - - add some more title to ease debugging (when aewm-drakx is in debug - mode) - - * install2.pm: don't warn if modules are missing when testing - - * bootloader.pm: find error in /tmp/.error only if exception is "xxx - failed" - (write_lilo_conf): ensure linear and lba32 are not both set - - * share/po/fake_c.pl: fix a tricky hack - - * my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no - more keyboard focus) - - * c/stuff.pm: i18n kdmrc - - * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk - installs) - - * install_steps_interactive.pm: fix typo - find error in /tmp/.error only if exception is "xxx failed" - makes cancel on mouse selection works even better - fix cancel on mouse choice - - * install_steps.pm: i18n kdmrc - enable supermount again - - * network/adsl.pm: correct dams typo - - * fs.pm (write_fstab): fix supermount moving from options to fstype - - * steps.pm: find error in /tmp/.error only if exception is "xxx failed" - - * tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c, - tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on - new map_request event (fix summary step) - - add and use aewm-drakx - - add some "skip" title on help/logo/steps windows so that aewm-drakx - know they don't need keyboard focus - - add some more title to ease debugging (when aewm-drakx is in debug - mode) - - * install_steps_auto_install.pm (enteringStep): do not translate in - ja|ko|zh - -2001/09/15 siegel - - * share/po/de.po: fixed another typo - new string - - * printerdrake.pm: added missing _() - - * standalone/draksec: use " instead of ' to get i18n - - * standalone/draknet: fixed missing _() - -2001/09/15 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added the PDQ panic button. - Removed a superfluous "set_help" line. - Save default spooler at program start, fixed typos in comments. - Command line commands as "lpr", "lpq", ... are mapped to the correct - spooler now. - Fixed bug of a waiting message appearing together with a dialog - Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type - for a printer - - * printer.pm: Added the PDQ panic button. - Command line commands as "lpr", "lpq", ... are mapped to the correct - spooler now. - - * standalone/printerdrake: Fixed bug of spooler choice via command line - options being ignored. - -2001/09/15 warly - - * share/rpmsrate: add drakfirsttime - -2001/09/14 dam's <damien@mandrakesoft.com> - - * printer.pm, printerdrake.pm: make test_pms happy - - * install_any.pm: pptp-adsl instead of pptp-adsl-fr - - * Xconfigurator.pm: no shadow when X test - - * standalone.pm: bugfix - - * my_gtk.pm: no icon if wizard - no shadow when X test - shadow color - - * bootlook.pm: bugfix - iautologin correction - - * mouse.pm: trying to remove draw - - * network/adsl.pm: debug - pptp-adsl instead of pptp-adsl-fr - bugfix - updated speedtouch handling. - -2001/09/14 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: removed S3 ViRGE card from card with problem with - frame buffer as it works fine. - - * Xconfigurator.pm: fixed filtering of depth for newt version. - depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as - depth - 32 simply doesn't work, even if DRI guide says it works :-) 24 bit works - fine - for Rage 128. - apply restriction on depth available when changing resolution, removed - S3 ViRGE - from experimental 3D accelerated card list as it really does not work, - allow on - second pass to change card configuration to choose server (experimental - server - are still only available to expert), added support for UseCCEFor2D for - Rage 128 - card if a TV card is installed (set to true, else set to false), added - support - for Rage Mobility M... card that are Rage 128 Mobile chipset, improved - error - message display to catch only appropriate error message of XFree 4.1.0 - only, - added support for 32 bits for DRI using Matrox card, improved info - message with - real version of XFree used (anybody) and identifier from PCI probe - (expert). - -2001/09/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target - - * mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using - a reduced form of mkinitrd_helper for mkinitrd (only - to provide a dietlibc-enabled static insmod) - -2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po: updated Walloon file - - * share/po/ko.po: updated Korean file - - * share/po/da.po: updated Danish file - updated Danish file - - * share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files - -2001/09/14 Pixel <pixel@mandrakesoft.com> - - * partition_table_raw.pm, install_any.pm: when testing for bad drives, if - opening for writing fails, remove the drive from the hard drive list - (useful for Smartmedia readers) - - * pkgs.pm: update correctSize and invCorrectSize (now linear) - - * share/po/fr.po: fix odin bug (please run msgfmt before committing!) - - * share/rpmsrate: do not install Aurora in russian - -2001/09/14 siegel - - * share/po/de.po: updates - - * standalone/drakautoinst: Check exisence of "/root/replay_install.img" - before anything else ... - -2001/09/14 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Added "set_help" lines for installer help texts. - Raw queue entry added, so cursor not always on "Alps MD-1000" when no - printer - detected. - Resolved conflict. - Now it is checked whether the network is configured and running. - draknet is called when the network is not configured. - It is checked whether the spooler is automatically started at boot. - The oki4daemon is started when needed. - Lexmarks inkjet drivers are fully integrated. - The permissions of the device files are set so that normal users can - print with PDQ. - - * standalone/printerdrake: Fixed spooler selection by command line. - - * printer.pm: Raw queue entry added, so cursor not always on "Alps - MD-1000" when no printer - detected. - Made network checking working on non-english systems. - Now it is checked whether the network is configured and running. - draknet is called when the network is not configured. - It is checked whether the spooler is automatically started at boot. - The oki4daemon is started when needed. - Lexmarks inkjet drivers are fully integrated. - The permissions of the device files are set so that normal users can - print with PDQ. - -2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po, - share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, - share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, - share/po/af.po: updated pot file - -2001/09/13 Frederic Lepied <flepied@mandrakesoft.com> - - * share/rpmsrate: added mt-st to ARCHIVING - -2001/09/13 odin - - * share/po/fr.po: updated up to 6648 - -2001/09/13 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: new migration feature for creation of - partitions on existing mount points - - * diskdrake.pm: - - add back shortcuts - - red colored buttons in nfs/smb/removable - -2001/09/13 dam's <damien@mandrakesoft.com> - - * pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated - - * my_gtk.pm: updated - addde /usr/share/icons in path for pixmaps search - shadow reduced to 5 pixels - - * standalone/draknet, network/isdn.pm: isdn timeout works now. - -2001/09/13 Frederic Lepied <flepied@mandrakesoft.com> - - * share/rpmsrate: added mt-st to ARCHIVING - -2001/09/13 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes - trouble to XFree86 4.1.0. - - * Xconfigurator.pm: fix for missing Xinerama for Matrox cards. - fix for Matrox G550 support, now add DRI support. - disable any question to user about XF3 if he choose a dual head - configuration. - disable DRI if Xinerama has been chosen. - updated Rage Mobility regexp for bad_card, added bad_card for XF4 as - Tseng ET6\d00. - - * install_any.pm: updates 3D category according Matrox G550 and Radeon - card. - - * install_steps.pm: synced with Xconfigurator bad_card class of video card - to avoid using frame - buffer, added ET6\d00 style card which seems to have problem. - -2001/09/13 odin - - * share/po/fr.po: updated up to 6648 - updated fr.po - -2001/09/13 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: add krozat - - * any.pm (inspect): use a safer dir when standalone - - * install_steps.pm: extend disable KDE GreetString to - ja|ko|zh|ru|th|vi|be|bg - do not translate kdm GreetString in ja|ko|zh (what about ru?) - in kdmrc GreetString, magic string HOSTNAME replaced by %n - - * diskdrake_interactive.pm: new migration feature for creation of - partitions on existing mount points - - * diskdrake.pm: - - add back shortcuts - - red colored buttons in nfs/smb/removable - - * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on - the fly without rebooting on a device with some already mounted - partitions) - - * install_steps_interactive.pm (selectKeyboard): don't prompt in newbie - mode if >=90, not >90 - -2001/09/13 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: shadow reduced to 5 pixels - - * standalone/draknet, network/isdn.pm: isdn timeout works now. - -2001/09/13 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fix for missing Xinerama for Matrox cards. - fix for Matrox G550 support, now add DRI support. - disable any question to user about XF3 if he choose a dual head - configuration. - disable DRI if Xinerama has been chosen. - updated Rage Mobility regexp for bad_card, added bad_card for XF4 as - Tseng ET6\d00. - avoid creating /etc/X11/XF86Config* file if --g_auto_install. - - * services.pm: updated repartition of services into category, network - category are commented so - that service will to "Other" one. - - * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes - trouble to XFree86 4.1.0. - - * install_any.pm: updates 3D category according Matrox G550 and Radeon - card. - - * install_steps.pm: synced with Xconfigurator bad_card class of video card - to avoid using frame - buffer, added ET6\d00 style card which seems to have problem. - -2001/09/13 Pixel <pixel@mandrakesoft.com> - - * keyboard.pm: filtered the list from lang2keyboard to display only valid - keyboards - - * c/stuff.xs.pm: add partition adding on the fly trick - - * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on - the fly without rebooting on a device with some already mounted - partitions) - - * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what - about ru?) - in kdmrc GreetString, magic string HOSTNAME replaced by %n - -2001/09/13 dam's <damien@mandrakesoft.com> - - * standalone/draknet, network/isdn.pm: isdn timeout works now. - -2001/09/13 François Pons <fpons@mandrakesoft.com> - - * lang.pm: fixed bad $localedir in load_mo(). - - * g_auto_install: updated so that this scripts is running again. - - * install2.pm: do not output error message for bad kernel if using - --g_auto_install. - - * install_steps_interactive.pm: fixed Printer name reporting for a - specific printer. - - * install_any.pm: updates 3D category according Matrox G550 and Radeon - card. - - * services.pm: updated repartition of services into category, network - category are commented so - that service will to "Other" one. - - * live_install2: updated #! as ../perl is not used. - - * my_gtk.pm: synced with --g_auto_install mode. - - * install_steps.pm: synced with Xconfigurator bad_card class of video card - to avoid using frame - buffer, added ET6\d00 style card which seems to have problem. - - * Xconfigurator.pm: fix for Matrox G550 support, now add DRI support. - disable any question to user about XF3 if he choose a dual head - configuration. - disable DRI if Xinerama has been chosen. - updated Rage Mobility regexp for bad_card, added bad_card for XF4 as - Tseng ET6\d00. - avoid creating /etc/X11/XF86Config* file if --g_auto_install. - synced with --g_auto_install mode. - disable testing with all SiS card except SiS 630 under XF4. - -2001/09/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po, - share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po, - share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po, - share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, - share/po/id.po: updated pot file - -2001/09/13 Pixel <pixel@mandrakesoft.com> - - * keyboard.pm: filtered the list from lang2keyboard to display only valid - keyboards - - * c/stuff.xs.pm: add partition adding on the fly trick - - * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on - the fly without rebooting on a device with some already mounted - partitions) - - * install2.pm (selectKeyboard): remove code causing - install_steps::selectKeyboard to be skipped - - * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what - about ru?) - in kdmrc GreetString, magic string HOSTNAME replaced by %n - -2001/09/12 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: typo - new color for shadow - corrected shadow handling - no shadow if liveupdate - - * share/help.png: new help - - * mouse.pm: removed debug code - - * network/tools.pm, network/netconnect.pm, network/ethernet.pm, - network/isdn.pm, network/adsl.pm, network/modem.pm: new default - connection handling - - * standalone.pm: added wait message while installing package - -2001/09/12 daouda - - * standalone/drakbug_report: add Mandrake release section - -2001/09/12 fcrozat - - * share/rpmsrate: Fix gnome install - -2001/09/12 François Pons <fpons@mandrakesoft.com> - - * install2.pm: removed obsolete --nocpi flag for install2. - avoid probing usb device (for mouse) if --noauto is given. - - * install_steps.pm: disabled frame buffer for most of the SiS display card - except SiS 630. - - * Xconfigurator.pm: added MGA G550 as always having two head. - - * live_install2: fix when switching perl version. - - * live_install: use system perl instead. - -2001/09/12 gbeauchesne - - * share/list.ia64, share/list, share/list.i386: - - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to... - - list.i386: ... Here. - - list.ia64: Updates. - -2001/09/12 odin - - * share/po/fr.po: updated fr.po - -2001/09/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, - share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po, - share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, - share/po/it.po, share/po/af.po: updated pot file - - * help.pm: new version with [ and ] - - * lang.pm: commented out utf-8 russian locale, for now - -2001/09/12 Pixel <pixel@mandrakesoft.com> - - * standalone/lsnetdrake: fix typo - added wonderful lsnetdrake - - * modules.pm, install2.pm: display error when the kernel mismatch the - modules - - * docs/README: explain how to get the boot kernels - - * install_steps_gtk.pm (choosePackagesTree): translate the categories - - * standalone/drakbug_report: cleanup - - * bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels - (suggest): no "quiet" boot for smp and enterprise kernels - allow grub even for more than 800MB - - * Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake - -2001/09/12 siegel - - * share/po/de.po: new & shiny verion - - * share/po/help_xml2pm.pl: fixed silly error - added keycap patch - -2001/09/12 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: corrected shadow handling - no shadow if liveupdate - table undef corrected - removed shadows if standalone - - * standalone/drakgw, standalone/draknet: corrected wizard mode in newt - mode - - * mouse.pm: removed debug code - - * network/netconnect.pm: corrected splash in non X mode - -2001/09/12 daouda - - * standalone/drakbug_report: add Mandrake release section - -2001/09/12 François Pons <fpons@mandrakesoft.com> - - * live_install2: fix when switching perl version. - - * live_install: use system perl instead. - -2001/09/12 kjx - - * share/po/zh_CN.po: revison - -2001/09/12 Pixel <pixel@mandrakesoft.com> - - * docs/README: explain how to get the boot kernels - - * install_steps_gtk.pm (choosePackagesTree): translate the categories - - * standalone/drakbug_report: cleanup - - * bootloader.pm: allow grub even for more than 800MB - -2001/09/11 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: removed useless print - don't detect ethx if no autodetection. - implement smarter checkboxes - - * mouse.pm: test updated - mouse test worked - - * network/ethernet.pm: don't detect ethx if no autodetection. - implement smarter checkboxes - - * pixmaps/arrow_down.xpm: pixmap corrected - new arrows - - * pixmaps/arrow_up.xpm: new arrows - - * share/rpmsrate: added ibod - added isdn-light - - * interactive_gtk.pm, my_gtk.pm: fear the shaped windows... - -2001/09/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * help.pm: small fix - - * share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po, - share/po/it.po: updated Hungarian file; - updated pot file - -2001/09/11 Pixel <pixel@mandrakesoft.com> - - * Makefile (tar-drakxtools): remove the building of "help" for drakxtools - - * bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not - a primary - partition (otherwise lilo dies) - -2001/09/10 dam's <damien@mandrakesoft.com> - - * network/modem.pm, network/ethernet.pm: detect_devices - - * standalone/net_monitor, network/network.pm: removed timeout:1 in - resolv.conf, modified timeout scanning in draknet/net_monitor - - * install_gtk.pm, install_steps_gtk.pm: mouse test moved - - * mouse.pm: test_mouse moved - - * my_gtk.pm: added border - window decorations - no set_events if embedded - - * standalone/draknet: removed timeout:1 in resolv.conf, modified timeout - scanning in draknet/net_monitor - debug - - * standalone/mousedrake: don't fork the code - - * network/adsl.pm: debug - debug - -2001/09/10 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: updated g_auto_install() for newer printerdrake - interface. - - * modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into - detect_devices::pcmcia_probe. - - * mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for - blank.img floppy image. - - * install_steps_interactive.pm, mouse.pm: added hid type usb mouse - support. - - * Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz, - 1024x480 but not automatically used). - -2001/09/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: plop - some adjustements in Games section - -2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/DrakX.pot, share/po/de.po: updated German file; added choice of - various quotes in help_xml2pm.pl - Updated pot file; - removed translations that are too low on percentage. - - * share/po/zh_TW.po: updated Chinese file - - * share/po/ko.po: updated Korean file - Updated pot file; - removed translations that are too low on percentage. - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated pot file; - removed translations that are too low on percentage. - - * share/po/help_xml2pm.pl: updated German file; added choice of various - quotes in help_xml2pm.pl - -2001/09/10 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm, my_gtk.pm: - - make diskdrake work in embedded mode - - $my_gtk::pop_it used where it should - - * detect_devices.pm: fix ide-scsi appearing 2 times when standalone - because both in /proc/ide - and /proc/scsi/scsi - - * share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars - - skip directories missing drakx-help.xml - - convert to the right charset (taken from $lang.po) - - rename help-*.po by help-*.pot - - fix typo in script removing $lang.po translations to favour - help-*.pot - - * diskdrake.pm: - - make diskdrake work in embedded mode - - $my_gtk::pop_it used where it should - fix Umount and Mount when i18ned for nfs/smb - don't display Wizard if wizard done before DrakX - - * share/po/Makefile, share/po/.cvsignore: - - rename help-*.po by help-*.pot - - fix typo in script removing $lang.po translations to favour - help-*.pot - -2001/09/10 siegel - - * share/po/de.po: updates - -2001/09/10 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue - modified to not get - interactive when overwriting a file. - Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be - able to - identify which PPD from /usr/share/cups/model was used (for - auto-install). - -2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po, - share/po/af.po: Updated pot file; - removed translations that are too low on percentage. - -2001/09/10 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: - - rename help-*.po by help-*.pot - - fix typo in script removing $lang.po translations to favour - help-*.pot - -2001/09/09 Pixel <pixel@mandrakesoft.com> - - * modules.pm: probeall handling - -2001/09/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue - -2001/09/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated Turkish file - - * share/po/sv.po: updated Swedish file - -2001/09/09 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (ejectCdrom): fix D state on exit - - * diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: - - "Wizard" and "More" are back - - allow "Use for loopback" when there is already a loopback - - set the options on newly created partitions - - recompute_loopbacks called after modification of loopbacks, no more - before reading - - restrict the lenght of the lines in partition description - - make loopback work - - * interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm: - clicked_may_quit used in place of clicked+exception to work-around - perl-GTK bug (?) - - * share/po/i18n_compssUsers: ensure we're not adding a string already - there (otherwise msgmerge yells) - - * share/po/help_xml2pm.pl, share/po/.cvsignore: xml help - handling/enhancing for multi-langs - - * modules.pm: probeall handling - (write_conf): switch to "probeall scsi_hostadapter ..." - - * share/po/Makefile: xml help handling/enhancing for multi-langs - xml help handling/enhancing for multi-langs - - * partition_table.pm (get_normal_parts_and_holes): remove only small - holes, not small partitions - - * fs.pm (set_default_options): remove iocharset=... for nfs (why was it - there?) - -2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fix some ortograf - - * share/rpmsrate: lvm not installed for everyone ?! - -2001/09/08 Pixel <pixel@mandrakesoft.com> - - * install_steps_auto_install.pm: force exitInstall to be non automatic - - * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm, - diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback - installs work again - -2001/09/09 Pixel <pixel@mandrakesoft.com> - - * modules.pm (write_conf): switch to "probeall scsi_hostadapter ..." - -2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fix some ortograf - - * share/rpmsrate: lvm not installed for everyone ?! - - * modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't - flush it when - it didn't decide to put any modules in it (to leave user's modules) (2) - it - doesn't remove the last line (3) it uses stronger regexp'es for - substitution to not remove modules that have names made of other modules - names subsets - -2001/09/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/zh_TW.po: updated Chinese file - -2001/09/08 Pixel <pixel@mandrakesoft.com> - - * lang.pm: fix font in iso-15 - - * modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..." - - * interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak - with nested subs) - - * share/diskdrake.rc: change name - - * install_steps_auto_install.pm: force exitInstall to be non automatic - - * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm, - diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback - installs work again - - * timezone.pm: Asia/Taipei for Traditional Chinese - - * detect_devices.pm: remove debug code - -2001/09/07 daouda - - * share/rpmsrate: add mdkonline (X 4) - -2001/09/07 fcrozat - - * share/rpmsrate: Add grio500 - -2001/09/07 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong - result). - fix all Matrox card used with XF4 which really does not like X in frame - buffer - (unable to restore frame buffer of DrakX). - -2001/09/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386, - rescue/tree/etc/rc.sysinit: ext3, xfs, jfs - - * bootloader.pm: use -v for mkinitrd - - * share/po/fr.po: "reseaux" and plurals - misc - - * share/rpmsrate: some work on games - -2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files - -2001/09/07 Pixel <pixel@mandrakesoft.com> - - * Makefile: cleanup po - - * install_steps.pm: s|kdmrc|kdm/kdmrc| - - * lang.pm: fix load_mo call - - * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help - - * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting - disable_forced_fsck called for ext3 formatting - (Type): disable fsck when migrated ext2->ext3 - - * fs.pm: disable_forced_fsck called for ext3 formatting - -2001/09/07 siegel - - * share/po/de.po: updates - -2001/09/07 Till Kamppeter <till@mandrakesoft.com> - - * standalone/printerdrake, printer.pm, printerdrake.pm: Data structure - fitted for auto-install to work - Optimized program to be much faster - Many more waiting messages - Many bugfixes - -2001/09/07 daouda - - * share/rpmsrate: add mdkonline (X 4) - -2001/09/07 fcrozat - - * share/rpmsrate: Add grio500 - -2001/09/07 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong - result). - fix all Matrox card used with XF4 which really does not like X in frame - buffer - (unable to restore frame buffer of DrakX). - -2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * any.pm: Changed simple quote to double quote for a translatable string - (otherwise - it isn't seen) - - * share/po/es.po: updated Spanish file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, - share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, - share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: - updated pot file - - * share/po/sv.po: updated Swedish file - updated pot file - -2001/09/07 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: s|kdmrc|kdm/kdmrc| - remove the "konsole and gnome-terminal are lamers in exotic languages, - link them to something better" - - * bootloader.pm (write_lilo_conf): fix typo - - * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help - - * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting - disable_forced_fsck called for ext3 formatting - (Type): disable fsck when migrated ext2->ext3 - - * install_any.pm, keyboard.pm: cleanup - - * partition_table.pm, share/list: add xfs - - * fs.pm: disable_forced_fsck called for ext3 formatting - - * share/rpmsrate: add jfsprogs - -2001/09/07 siegel - - * share/po/de.po: updates - updates/fixes - -2001/09/06 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/tools.pm: corrected speedtouch - - * install_gtk.pm: removed comments - -2001/09/06 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using - XFree 4.1.0 is not bad, and - all NVIDIA card are no more considered bad. - - * pkgs.pm: fixed retry of package 3 times everytime even if first install - succeeded, now - after first successfull install, go to next package to install. - - * install_steps.pm: removed some cards for allowing frame buffer. - -2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: works now ;p - -2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX - corrected lang.pm to have coherence in locale usage (it was the source - of much of the problems); changed keyboard.pm to ignore charset encoding - in locale name for locale -> keyboard guessing. - removed unused gconv modules, converted az.po to utf-8 (as it was the - only - remaining az.po on Earth still in a non standard encoding) - - * share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2, - keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in - locale usage (it was the source - of much of the problems); changed keyboard.pm to ignore charset encoding - in locale name for locale -> keyboard guessing. - removed unused gconv modules, converted az.po to utf-8 (as it was the - only - remaining az.po on Earth still in a non standard encoding) - -2001/09/06 Pixel <pixel@mandrakesoft.com> - - * install2.pm: fix keyboard config + some cleanup - cleanup (use /proc/self instead of /proc/$$) - - * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix - keyboard config + some cleanup - -2001/09/06 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/tools.pm: corrected speedtouch - - * install_gtk.pm: removed comments - -2001/09/06 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using - XFree 4.1.0 is not bad, and - all NVIDIA card are no more considered bad. - avoid using @resolutions_laptop, now use only @resolutions, this means - 1400x1050 - is available to other, use XFree86 4.1.0 builtin timings for 1400x1050 - (so - 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration - file). - - * install_steps.pm: removed some cards for allowing frame buffer. - fix log when configuring printer queue. - - * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres. - cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050 - and - 1920x1440, 2048x1536 has no modeline (but its min hsync is really high). - - * pkgs.pm: fixed retry of package 3 times everytime even if first install - succeeded, now - after first successfull install, go to next package to install. - - * install_any.pm: update printer data for g_auto_install. - -2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: works now ;p - -2001/09/06 Pixel <pixel@mandrakesoft.com> - - * install2.pm: fix keyboard config + some cleanup - cleanup (use /proc/self instead of /proc/$$) - - * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix - keyboard config + some cleanup - - * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the - type - -2001/09/06 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/tools.pm: corrected speedtouch - - * install_gtk.pm: removed comments - new mouse test - -2001/09/06 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: revert previous patch, this is not usable with current rpm as - it complains if - one the file has a modified MD5SUM against the header describing it in - the - hdlist, so this is most of the time useless. - guess filename if the file is not found (for an rpm file during - installation), - so try with release incremented in such case (good for Cooker user or - local - tester using network installation). - - * install_steps.pm: fix log when configuring printer queue. - - * Xconfigurator.pm: avoid using @resolutions_laptop, now use only - @resolutions, this means 1400x1050 - is available to other, use XFree86 4.1.0 builtin timings for 1400x1050 - (so - 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration - file). - - * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres. - cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050 - and - 1920x1440, 2048x1536 has no modeline (but its min hsync is really high). - - * install_any.pm: update printer data for g_auto_install. - - * printerdrake.pm: revert previous commit. - added a missing ifup lo, on some case (auto_install) it fails. - - * printer.pm: start ifup lo before starting service cups. - -2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - - * share/po/ga.po, share/po/no.po: updated Irish and Norwegian files - -2001/09/06 Pixel <pixel@mandrakesoft.com> - - * share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend, - fix the use - - * diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names - - * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the - type - - * timezone.pm (ntp_server): fix (step-tickers was empty) - -2001/09/05 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor, standalone/draknet: corrected opeions - - * standalone/mousedrake: typo - updated - - * network/tools.pm: corrected initcript - - * pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm, - pixmaps/mouse_left.xpm: new pixmaps - -2001/09/05 Pixel <pixel@mandrakesoft.com> - - * standalone/diskdrake: fix function called - -2001/09/05 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Set default printer (all spoolers), manual - config (CUPS), bugfixes, clean-ups. - -2001/09/05 dam's <damien@mandrakesoft.com> - - * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png, - pixmaps/wiz_drakgw.png: new icons - - * share/themes-mdk.rc: updated theme - - * standalone/draknet: interface display corrected - - * share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons - - * install_gtk.pm: 2 sec without sensitives buttons - - * network/netconnect.pm: only if standalone - - * pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png, - pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png, - pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png, - pixmaps/bootdisk.png: new pixmaps - -2001/09/05 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed display of XFdrake test image (fcrozat). - - * install_steps.pm: fixed typo preventing removable devices to be seen in - /etc/fstab. - fixed configurePrinter (used for auto_install). - - * install_steps_interactive.pm: avoid asking when using existing partition - for magic partition with a real - mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so - partition is - not unmountable). - - * bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown - lilo. - - * fs.pm: fix bad creation of /mnt/hd for an hd installation without - ramdisk. - support setting /tmp/hdimage in /etc/fstab even if memory is low (not - using ramdisk). - - * install_any.pm: filtering $o->{printer} for g_auto_install(). - allow installing urpmi on hd install even if low memory (so not using - ramdisk). - - * diskdrake_interactive.pm: Do not use for loopback of magic partition - (/tmp/hdimage). - -2001/09/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1 - -2001/09/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bs.po: updated Bosnian file - - * share/po/uk.po: updated Ukrainian file - -2001/09/05 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: use EISA_ID in more cases to have the name - non-case dependent EISA comparison - also try EISA ID to auto-detect the monitor (sometimes the EISA ID is - there, but not the [hv]syncrange - - * Xconfig.pm: fix typos - non-case dependent EISA comparison - also try EISA ID to auto-detect the monitor (sometimes the EISA ID is - there, but not the [hv]syncrange - - * modules.pm: favor tmscsim over AM53C974 - - * tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info - also try EISA ID to auto-detect the monitor (sometimes the EISA ID is - there, but not the [hv]syncrange - - * standalone/diskdrake: fix function called - -2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-( - -2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: - Updated Danish file; updated pot file - -2001/09/04 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix typo - -2001/09/04 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Fitted to the new Foomatic version. - Fixed bug of spooler change only working when language is English. - -2001/09/04 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: fix bad vga= which go for some install. - -2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * network/netconnect.pm: small english change - - * mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff - - * share/rpmsrate: tetex-doc - - * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-( - -2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po, - share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, - share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: - Updated Danish file; updated pot file - - * share/po/ja.po: updated Japanese file - -2001/09/04 Pixel <pixel@mandrakesoft.com> - - * modules.pm (add_alias): use "above" instead of "post-install" - - * partition_table.pm: re-add JFS - - * fsedit.pm, common.pm, bootloader.pm: - - don't expand symlinks in grub's menu.lst - - better use of /proc/partitions verification - - * detect_devices.pm (getCompaqSmartArray): add yet another location for - cpqarray location - - * fs.pm: fix typo - mount ext3 as ext2 during install for speed up - -2001/09/04 fcrozat - - * share/rpmsrate: Add plugins for KDE and Mozilla - -2001/09/04 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: fix bad vga= which go for some install. - - * pkgs.pm: cleanup to avoid invalid file error. - -2001/09/04 Pixel <pixel@mandrakesoft.com> - - * modules.pm (add_alias): use "above" instead of "post-install" - - * fs.pm: mount ext3 as ext2 during install for speed up - - * partition_table.pm: re-add JFS - - * fsedit.pm, common.pm, bootloader.pm: - - don't expand symlinks in grub's menu.lst - - better use of /proc/partitions verification - - * detect_devices.pm (getCompaqSmartArray): add yet another location for - cpqarray location - -2001/09/04 yduret - - * my_gtk.pm: emebedded mode fix - - * interactive_gtk.pm, diskdrake.pm: embedded mode fix - -2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: unfuzzy-ise a few things, translate a few things - -2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po: updated Korean file - -2001/09/03 Pixel <pixel@mandrakesoft.com> - - * fs.pm: fix for lvm (non-)creation of devices - -2001/09/03 yduret - - * my_gtk.pm, diskdrake.pm: fix Embedded mode - -2001/09/03 dam's <damien@mandrakesoft.com> - - * network/network.pm: added timeout in resolv.conf - -2001/09/03 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: updated to use new urpmi.cfg format for install_urpmi, - make sure the directory - is not given for ftp and http install ($dir). - - * Xconfigurator_consts.pm: added 1920x1440 and 2048x1536. - - * Xconfig.pm: make sure a staling Mouse2 is not present unless it really - physically exists. - -2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: add axnet_cs to pcmcia category - - * mdk-stage1/probing.c: change `scd' with `sr' - -2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/es.po: updated Spanish file - - * share/po/ko.po: updated Korean file - -2001/09/03 Pixel <pixel@mandrakesoft.com> - - * timezone.pm (ntp_server): also set /etc/ntp/step-tickers - - * fsedit.pm, devices.pm: fix mtab reading and pseudo-device use - - * interactive_gtk.pm: better sizing for combo boxes - - * install_steps_interactive.pm (choosePartitionsToFormat): do not propose - to propose already formatted - fat partitions - - * share/list: those files disappeared ?? - - * fs.pm: fix for lvm (non-)creation of devices - (set_default_options): created - fix mtab reading and pseudo-device use - - * diskdrake.pm (smb_create, nfs_create): make the "New" button work - (raw_hd_mount_point): fix checking the same mount point - (try_): fix error displaying - - * partition_table.pm: fix switching to 0x85 extended when - remove_empty_extended is called - -2001/09/03 yduret - - * standalone/net_monitor: sync with new logdrake command line options - -2001/09/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bs.po: updated bosnian file - Added Bosnian file - -2001/09/01 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: avoid deleting package from %packages in install() when closing - fd associated, - if the open is called again (?), it will cause an invalid file (seems to - happens - on some invalid file). - -2001/08/31 dam's <damien@mandrakesoft.com> - - * standalone/draksec: corrected yesno interpretation - libsafe modification - - * network/netconnect.pm: corrected profil recording for modem - - * standalone/net_monitor: correted typo - - * network/ethernet.pm: corrected zero return when cable configuring - - * any.pm: corrected autologin : no uc anymore - - * network/modem.pm: added domainname2 setting - - * share/logo-mandrake.png: new logo - -2001/08/31 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added missing AlwaysCore line for second mouse for - XF3. - - * mouse.pm: added missing AlwaysCore line for second mouse in XF3. - - * standalone.pm: add option --allow-medium-change to force asking question - even if --auto is - given on command line of urpmi, for installing package so that a dialog - appears. - -2001/08/31 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES - section - have "numlock" in INSTALL because it's the only package which goes to - CD#2 - when you unselect all groups, so having it here will allow not changing - CD - with this kind of small install - -2001/08/31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian - and Spanish files - - * share/po/sv.po: updated Swedish file - updated Ukrainian and Spanish files - -2001/08/31 siegel - - * share/help_sav.png: not used any more - - * share/po/de.po: updates - - * share/logo-mandrake2.png, share/logo-mandrake_trans.png, - share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old - versions => not in use any more - -2001/08/31 yduret - - * bootlook.pm: updated code - -2001/08/30 dam's <damien@mandrakesoft.com> - - * network/tools.pm: nicer display - - * standalone/draknet: added use common.pm (can be usefull, eh?) - - * network/network.pm: silently /sbin/ip - track_network_id only if laptop - -2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: Updated Danishfile - updated pot file (I had lost the group descriptions, sorry, they are - back now) - moved chinese files to charset independent names - - * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, - share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, - share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I - had lost the group descriptions, sorry, they are back now) - moved chinese files to charset independent names - -2001/08/30 Pixel <pixel@mandrakesoft.com> - - * lang.pm (read): it works now - - * help.pm: fixed (was utf8) - - * install_steps_gtk.pm (new): call interactive_gtk::new - - * install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial - mouse) before service choice - - * pkgs.pm (naughtyServers): update for 8.1 - -2001/08/30 dam's <damien@mandrakesoft.com> - - * interactive.pm: corrected icon display - - * my_gtk.pm: new wizard - - * interactive_gtk.pm: corrected wizard mode display height/width - - * standalone/draknet: added draknet client installation - - * network/network.pm: track_network_id only if laptop - dhcp package installation - - * pixmaps/wiz_default_left.png: new logo - -2001/08/30 François Pons <fpons@mandrakesoft.com> - - * mouse.pm: make sure to update all symlink according to any mouse (max 2) - probed. - fix previous fixes on mouse::write_conf - - * standalone/mousedrake: fix previous fix (typo). - keep mouse specific paramater if user does not change its mouse. - make sure --auto is not interactive on some part. - use default value for port device if a serial mouse. - - * printer.pm: fixed foomatic failed (no lo up since ifup lo don't run) - - * Makefile: ugly to make sure standalone/pixmaps is not here when building - tar-drakxtools. - - * Xconfig.pm: when reading existing configuration for mouse, update - type|name for second mouse too. - make sure default to set 3 for nbuttons for getinfoFromXF86Config for - second - mouse if this mouse has 3 buttons. - - * Xconfigurator.pm: for single heads mode, no screen id should be set in - file (or XFree is going - mad, but he is right, no ?) - - * install_any.pm: if a medium is refused, get rid of it definitively until - it is accepted again. - -2001/08/30 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps_interactive.pm: have a wait_message during installation of - bootloader - - * mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA - Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28 - -2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese, - Spanish and Vietnamese files - -2001/08/30 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: allow LVM on RAID - - * help.pm: fixed (was utf8) - - * any.pm: cleanup - - * pkgs.pm (naughtyServers): update for 8.1 - - * lang.pm (read): it works now - - * fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if - removable - media - - * share/po/Makefile: fix utf8 translation of xml file - - * interactive_gtk.pm: fix&cleanup window size - - * tools/Makefile: cleanup unneeded stuff - -2001/08/30 siegel - - * share/po/de.po: new german version - -2001/08/30 warly - - * share/rpmsrate: add koffice-i18n diald vlan-utils - -2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw, standalone/drakautoinst: quit_global - - * share/po/fr.po: minor fix - -2001/08/29 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: fix language selection - - * c.pm: better error message when function c::foo() is missing - - * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev - in /) - -2001/08/29 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed if undef encountered in depslist when installing package - (traversing - depslist as $depOrder). - -2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw, standalone/drakautoinst: quit_global - - * share/po/fr.po: minor fix - -2001/08/29 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: fix language selection - - * c.pm: better error message when function c::foo() is missing - - * install_steps_gtk.pm (installPackages): have Ok button by default for - asking for changing CD - - * bootloader.pm (mkbootdisk): cleanup - - * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev - in /) - - * devices.pm: remove fd0H1440 and fd1H1440 - - * modules.pm: remove "msdos" - -2001/08/29 François Pons <fpons@mandrakesoft.com> - - * mouse.pm: improved write_conf to enable multi-mice if only once mice is - already defined. - - * standalone/mousedrake: try to merge already existing mouse configuration - with what has been probed, - change if mouse is really changed as probe is incomplete. - - * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters. - - * pkgs.pm: fixed if undef encountered in depslist when installing package - (traversing - depslist as $depOrder). - -2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw, standalone/drakautoinst: quit_global - - * share/po/fr.po: minor fix - -2001/08/29 Pixel <pixel@mandrakesoft.com> - - * c.pm: better error message when function c::foo() is missing - - * keyboard.pm (loadkeys_files): fixed - - * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm, - Makefile.config: add localedrake (not tested) - - * rescue/make_rescue_img: make it work (do not have the dev in /) - cleanup, speedup, use mknod for devices - - * install_steps_gtk.pm (installPackages): have Ok button by default for - asking for changing CD - - * rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices - - * bootloader.pm (mkbootdisk): cleanup - - * rescue/dirs: make it work (do not have the dev in /) - - * devices.pm: remove fd0H1440 and fd1H1440 - - * modules.pm: remove "msdos" - -2001/08/29 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch - configuration - -2001/08/29 François Pons <fpons@mandrakesoft.com> - - * mouse.pm: improved write_conf to enable multi-mice if only once mice is - already defined. - - * install_steps.pm: add support for mandatory frame buffer support (SiS - 630) need them for XF3 to - work properly, XF4 does work with it nicely. - - * Xconfigurator.pm: make sure Port entry for wacom is placed first. - - * standalone/mousedrake: try to merge already existing mouse configuration - with what has been probed, - change if mouse is really changed as probe is incomplete. - - * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters. - -2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: games - -2001/08/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file - -2001/08/29 Pixel <pixel@mandrakesoft.com> - - * fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle - symlinks device and devfs devices - - * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm, - Makefile.config: add localedrake (not tested) - - * install_steps.pm: no need to have devfs=nomount anymore in root raid - do not modify fstab options in upgrade - - * keyboard.pm (loadkeys_files): fixed - fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup - - * diskdrake_interactive.pm: try to better handle symlinks device and devfs - devices - (main): fix - (Create): fix typo causing primaryOrExtended to be ignored - - * rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup, - speedup, use mknod for devices - - * c/stuff.xs.pm, detect_devices.pm: better floppy detection/info - -2001/08/28 dam's <damien@mandrakesoft.com> - - * interactive.pm, install2.pm: corrected icon handling - - * services.pm: added cupslpd in printing section - -2001/08/28 François Pons <fpons@mandrakesoft.com> - - * Makefile.config: really fix typo... - fixed typo. - -2001/08/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po: updated Czech file - -2001/08/28 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: remove the temporary file /tmp/autoinst.img - - * install_steps.pm, install_steps_interactive.pm: propose to format / and - /usr even if isFormatted. More generally do not trust isFormatted to - show which partitions to format - -2001/08/28 siegel - - * ChangeLog, keyboard.pm: - - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard - if no laptop is detected (= give users the chance to know about the - existence of this variable). - -2001/08/28 yduret - - * standalone/diskdrake: embedded mode nicer - -2001/08/28 dam's <damien@mandrakesoft.com> - - * interactive.pm, install2.pm: corrected icon handling - -2001/08/28 François Pons <fpons@mandrakesoft.com> - - * share/list: added /sbin/e2fsck - - * share/aliases: added fsck.ext2 -> e2fsck (now in list file) - removed e2fsck.shared as e2fsprogs now provide a shared version instead - of a - static one. - - * Makefile.config: really fix typo... - fixed typo. - removed reference to e2fsck.shared (now use e2fsck from package which is - shared - since 1.23-2mdk). - -2001/08/28 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: remove the temporary file /tmp/autoinst.img - -2001/08/28 siegel - - * ChangeLog, keyboard.pm: - - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard - if no laptop is detected (= give users the chance to know about the - existence of this variable). - -2001/08/28 yduret - - * standalone/diskdrake: embedded mode nicer - -2001/08/28 Stefan Siegel <siegel@mandrakesoft.com> - - * keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard - if no laptop is detected (= give users the chance to know about - the existence of this variable). - -2001/08/28 dam's <damien@mandrakesoft.com> - - * mouse.pm: typo - -2001/08/28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: default the licence agreement to "Refuse" - - * standalone/drakboot: security fix and various - move to all_hds stuff - - * c/stuff.xs.pm, bootloader.pm: security fix and various - -2001/08/28 warly - - * share/rpmsrate: move libsafe to SERVER_OTHER 2 - added prelude, libsafe... - -2001/08/28 yduret - - * standalone/drakxconf: readded dsikdrake - added new items, remove some old ones - -2001/08/27 dam's <damien@mandrakesoft.com> - - * network/network.pm: corrected hwaddr setting and draknet first window - display - corrected typo - - * network/netconnect.pm: corrected hwaddr setting and draknet first window - display - -2001/08/27 dam's <damien@mandrakesoft.com> - - * network/network.pm: corrected hwaddr setting and draknet first window - display - corrected typo - - * network/netconnect.pm: corrected hwaddr setting and draknet first window - display - -2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sk.po, share/po/eu.po: updated Basque and slovak files - -2001/08/27 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm: nicer help display - - * share/keyboards.tar.bz2: fix the rights - - * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC - -2001/08/27 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: corrected bad window size - - * network/network.pm: make it compile - corrected hwaddr stuff - added HWADDR - - * network/tools.pm: corrected internet initscript - - * any.pm, mouse.pm: make it compile - add_devfslink - -2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list. - Added Latvian keyboard - - * share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX - - * share/po/sk.po, share/po/eu.po: updated Basque and slovak files - -2001/08/27 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm: nicer help display - - * diskdrake.pm: use empty hash instead of the raid/loopback array - - * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC - -2001/08/27 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: corrected bad window size - - * network/network.pm: added HWADDR - - * network/tools.pm: corrected internet initscript - -2001/08/27 François Pons <fpons@mandrakesoft.com> - - * any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej - patch to support CHAP again. - -2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list. - Added Latvian keyboard - -2001/08/27 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: use empty hash instead of the raid/loopback array - -2001/08/26 warly - - * share/rpmsrate: add some important packages - -2001/08/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakautoinst: require -> use - - * install_any.pm: save the .img file so that multi-cd install won't ask to - re-enter first cd - -2001/08/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file - -2001/08/26 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile, share/po/.cvsignore: fetch directly the latest - drakx-help.xml - -2001/08/25 Pixel <pixel@mandrakesoft.com> - - * standalone/drakbug_report: add "rpm -qa" - - * bootlook.pm: fix deprecated call standalone::pkgs_install - - * diskdrake.pm: don't the grab flag propagate everywhere - -2001/08/25 dam's <damien@mandrakesoft.com> - - * install2.pm, steps.pm: icon correction - -2001/08/25 Pixel <pixel@mandrakesoft.com> - - * fs.pm (mount): accept mounting iso9660 filesystem as it should be - (write_fstab): enable mounting more than one swap :) - - * bootlook.pm: fix deprecated call standalone::pkgs_install - - * install_steps.pm: added the missing security parameter to - set_default_options - - * diskdrake.pm: don't the grab flag propagate everywhere - -2001/08/24 dam's <damien@mandrakesoft.com> - - * pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm, - pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal - pix - - * standalone/mousedrake: updated mouse test - -2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the - uncompressing of ramdisk will rulz now - - * mdk-stage1/network.c: allow unsetting of automatic mode if not enough - parameter provided in network steps - - * mdk-stage1/probing.c: - - descr of proc files - - fix small typo (segfault or not segfault? that's the question) - enable install from Compaq Smart Array - - * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather - than gcc statically - - * mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart - Array - -2001/08/24 Pixel <pixel@mandrakesoft.com> - - * tools/pcmcia_config.patch: update the patch - - * Makefile (test_pms): make perl_checker skip help.pm - ensure no .orig are generated when the pcmcia patch is applied - - * tools/make_mdkinst_stage2: give a little more free space (esp. for - russian lang) - - * lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE - - * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates - help.pm from xml doc done by doc team - -2001/08/24 dam's <damien@mandrakesoft.com> - - * network/adsl.pm: bugfix, speedtouch help - - * standalone/mousedrake: updated mouse test - -2001/08/24 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: fixed possible bug (not sorted partition when calling - mount_part). - - * install_any.pm: fixed hdInstallPath for an hd installation without - usingRamdisk (not installing - urpmi in such case). - updated packages to copy for printerdrake, removed almost obsoletes - XFree86 - 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16, - 3DLabs) - which means user will have to change CD back to CD#1 if he a such a - card. - removed obsolete code for cond_remount and cond_umount and update - hdInstallPath - for hd installation. - - * diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of - common::useRamdisk(). - take care mount point action is available for the hd installation - partition only - if a ramdisk is used (as it can be unmounted). - use more global isMagicPart instead of isInstallHdPart. - added real_mntpoint documentation and take care of hd install partition - for - available actions. - - * fs.pm: take care of using ram disk to remap mntpoint of hd installation - partition. - fixed partition never seen as mounted, added special case for - real_mntpoint to - remount magic partition on the right place. - -2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the - uncompressing of ramdisk will rulz now - - * mdk-stage1/automatic.c: revert my auto->interactive patch - - * mdk-stage1/network.c: allow unsetting of automatic mode if not enough - parameter provided in network steps - - * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather - than gcc statically - - * mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable - install from Compaq Smart Array - -2001/08/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm: - enabling euro and utf-8 for some languages; added unicode font - -2001/08/24 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: remove the cond_umount_hdimage and - cond_remount_hdimage - - * tools/pcmcia_config.patch: update the patch - - * lang.pm: no need for UTF-8/LC_CTYPE - (load_mo): if not usingRamdisk, don't try getFile - - * diskdrake_interactive.pm: remove the cond_umount_hdimage and - cond_remount_hdimage - (Done): do not write fstab nor ask about it in install - - * fs.pm (mount): allow to mount 'proc' and 'usbdevfs' - - * Makefile: ensure no .orig are generated when the pcmcia patch is applied - - * partition_table.pm (write): do not die when real_mntpoint fs fail to - unmount/remount, just log - (write): unmount+remount real_mntpoint before doing the kernel_read - - * share/gen_locales.sh: no need for UTF-8/LC_CTYPE - - * pkgs.pm: fix "invalid file" - -2001/08/24 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: speedtouch configuration - - * my_gtk.pm: gtk_create_xpm handles no absolute xpm path - - * pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm: - added new mouse pixmap for mousedrake - - * network/adsl.pm: bugfix, speedtouch help - added aliases for speedtouch stuff - speedtouch configuration - removed adsl detectioin, once again. - - * standalone/mousedrake: no absolute pixmap reference - new mousedrake. experimental - - * network/tools.pm: speedtouch configuration - export write_initscript, correct initscript. - -2001/08/24 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: fixed possible bug (not sorted partition when calling - mount_part). - - * diskdrake_interactive.pm: take care mount point action is available for - the hd installation partition only - if a ramdisk is used (as it can be unmounted). - use more global isMagicPart instead of isInstallHdPart. - added real_mntpoint documentation and take care of hd install partition - for - available actions. - - * install_any.pm: fixed hdInstallPath for an hd installation without - usingRamdisk (not installing - urpmi in such case). - updated packages to copy for printerdrake, removed almost obsoletes - XFree86 - 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16, - 3DLabs) - which means user will have to change CD back to CD#1 if he a such a - card. - removed obsolete code for cond_remount and cond_umount and update - hdInstallPath - for hd installation. - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2, - mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures - and updated documentation. - - * fs.pm: take care of using ram disk to remap mntpoint of hd installation - partition. - fixed partition never seen as mounted, added special case for - real_mntpoint to - remount magic partition on the right place. - -2001/08/24 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm (write): do not die when real_mntpoint fs fail to - unmount/remount, just log - (write): unmount+remount real_mntpoint before doing the kernel_read - - * install_steps.pm: remove the cond_umount_hdimage and - cond_remount_hdimage - - * diskdrake_interactive.pm: remove the cond_umount_hdimage and - cond_remount_hdimage - (Done): do not write fstab nor ask about it in install - - * lang.pm (load_mo): if not usingRamdisk, don't try getFile - - * fs.pm (mount): allow to mount 'proc' and 'usbdevfs' - -2001/08/24 siegel - - * share/po/de.po: New & shiny german version - -2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - - * share/po/el.po: updated Greek file - -2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - -2001/08/23 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: at_boot connection,resolvconf in profiles - - * standalone/draksec: addedlibsafe option - - * network/adsl.pm: restart network after having tested adsl. experimental - -2001/08/23 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: removed unusefull greping when building package - tree. - -2001/08/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: work on GAMES section - -2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/lv.po: updated Latvian file - -2001/08/23 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not - using ramdisk - (disable_user_view): damned kdmrc moved - - * diskdrake_interactive.pm: cancel at startup will now exit - ask wether to save fstab - (part_possible_actions): have "Mount point" first to please fpons - - * fs.pm: keep the freq&passno of /etc/fstab - - * tools/i386/netboot/menu.lst.example, - tools/i386/netboot/make_boot_network, - tools/i386/netboot/automatic.para.default: as we now have - menu.lst.example, i remove automatic.para for more flexibility - - * lang.pm: fix locale support when usingRamdisk - -2001/08/22 anoncvs - - * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming - <dxiaoming@mandrakesoft.com> - Updated chinese (simplied) translation. - -2001/08/22 Pixel <pixel@mandrakesoft.com> - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R - - * network/nfs.pm: pleac perl_checker - - * interactive_gtk.pm: more intelligent setting back the selected value in - the clist and ctree - (done already for entry) - - fix entries editing causing the cursor to go to the end of line - - select the text - - * c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside - otherwise LOG is closed and rpmlib tries to write in it and ... - -2001/08/22 anoncvs - - * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming - <dxiaoming@mandrakesoft.com> - Updated chinese (simplied) translation. - -2001/08/22 fabman - - * share/po/es.po: updated spanish .po files for DrakX and drakbootdisk - -2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when - entries are not given - - * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c, - mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h, - mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all - but ramdisk Read Only - -2001/08/22 Pixel <pixel@mandrakesoft.com> - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R - - * bootlook.pm: fix typo - - * network/nfs.pm: pleac perl_checker - - * install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed - and rpmlib tries to write in it and ... - do not call configurePrinter if no printer is wanted - - * interactive_gtk.pm: more intelligent setting back the selected value in - the clist and ctree - (done already for entry) - - fix entries editing causing the cursor to go to the end of line - - select the text - - * c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is - closed and rpmlib tries to write in it and ... - -2001/08/22 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: fixed int and float checking which should accept - negative number (added explicit - positive too), cleaned code for some perl idioms. - - * install_steps.pm: updated configurePrinter to use foomatic printer - configuration. - -2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when - entries are not given - - * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c, - mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h, - mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all - but ramdisk Read Only - -2001/08/22 kjx - - * share/po/zh_CN.GB2312.po: review - review - -2001/08/22 Pixel <pixel@mandrakesoft.com> - - * bootlook.pm: fix typo - - * install_steps_auto_install.pm: don't have formatPartitions interactive - by default - - * install_steps.pm: do not call configurePrinter if no printer is wanted - -2001/08/22 siegel - - * share/po/de.po: new german version - -2001/08/21 dam's <damien@mandrakesoft.com> - - * Makefile: added rpcinfo to the tar - corrected bad Makefile : rpcinfo-flushed.c comes from tools. - - * standalone/draknet: ergonomy correction - - * network/tools.pm: corrected qq bug - corrected bug - - * standalone/net_monitor: log updatede - removed memoty leak - time connection label - -2001/08/21 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: moved installation code of foomatic (only) - if a printer may be chosen. - - * install_any.pm: fixed hd installation for urpmi. - - * printerdrake.pm: slight rewrite of some perl idioms. - -2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po: updated Walloon file - updated pot file - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - -2001/08/21 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5 - - * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd - install - - * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot - - * fs.pm (read_fstab): don't expand symlink if the link goes in a directory - - * install_any.pm: cleanup - - * install_steps_interactive.pm: fix '$' in i18n message - -2001/08/21 siegel - - * share/po/de.po: new german version - -2001/08/21 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: removed memoty leak - time connection label - - * network/tools.pm, network/modem.pm, network/netconnect.pm, - network/ethernet.pm, network/isdn.pm: generik internet initscript, planq - the children again - - * network/adsl.pm: speedtouch config - generik internet initscript, planq the children again - -2001/08/21 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed hd installation for urpmi. - -2001/08/21 kjx - - * share/po/zh_CN.GB2312.po: review - -2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file - -2001/08/21 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: fix spelling error - - * install_any.pm: cleanup - install hotplug if usb (i kept usbd just in case) - - * diskdrake_interactive.pm (Create): force no sorting on filesystems, - editable mount points - - * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd - install - - * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot - - * install_steps_interactive.pm: fix '$' in i18n message - - * fs.pm (read_fstab): don't expand symlink if the link goes in a directory - umask=0 only if security level < 3 - -2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was - nowhere) - -2001/08/20 Pixel <pixel@mandrakesoft.com> - - * fs.pm: basic nfs handling in drakx - fix bug 4257 - - * detect_devices.pm (raidAutoStart): fix for when kmod is there - - * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat - with devfs - - * diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder - to umount /tmp/hdimage only when needed - - * Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm, - tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in - drakx - -2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was - nowhere) - -2001/08/20 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request - of Alex Hulse <axh0@aber.ac.uk> on cooker) - - * detect_devices.pm (raidAutoStart): fix for when kmod is there - - * diskdrake.pm: remove test code - - * fs.pm: fix bug 4257 - - * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat - with devfs - - * install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder - to umount /tmp/hdimage only when needed - - * interactive_gtk.pm (wait_message_nextW): fix previous text == new text - causing no - expose_event causing dead loop - -2001/08/19 Pixel <pixel@mandrakesoft.com> - - * diskdrake_interactive.pm: save fstab on exit - - * fsedit.pm: various typos fix - - * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no - files are removed unless we're in ramdisk - make the devfs= mount or nomount choice based on raid-based root work - - * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no - files are removed unless we're in ramdisk - fix diskdrake requiring gtk - add some test code - - * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are - removed unless we're in ramdisk - various typos fix - - * install_steps_interactive.pm, common.pm, install2.pm, install_any.pm, - lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no - files are removed unless we're in ramdisk - -2001/08/19 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: major fs.pm rework + adaptation to it - don't show nfs/smb/removable in install - basic smb handling - - * network/smb.pm: basic smb handling - - * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no - files are removed unless we're in ramdisk - make the devfs= mount or nomount choice based on raid-based root work - disable supermount for the moment - major fs.pm rework + adaptation to it - - * install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in - usingRamdisk, ensure no files are removed unless we're in ramdisk - simplify - - * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no - files are removed unless we're in ramdisk - fix diskdrake requiring gtk - add some test code - major fs.pm rework + adaptation to it - - * install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files - are removed unless we're in ramdisk - major fs.pm rework + adaptation to it - - * partition_table.pm: remove JFS from @important_types (too broken for the - moment) - remove isSupermount (was unused) - - * common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in - usingRamdisk, ensure no files are removed unless we're in ramdisk - - * interactive_gtk.pm (create_ctree): fix focusing (the assumption number - of leaves = number of lines is dumb) - - * fsedit.pm: various typos fix - major fs.pm rework + adaptation to it - - * bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it - - * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are - removed unless we're in ramdisk - various typos fix - major fs.pm rework + adaptation to it - cleanup - basic smb handling - - * diskdrake_interactive.pm: save fstab on exit - major fs.pm rework + adaptation to it - -2001/08/18 Pixel <pixel@mandrakesoft.com> - - * fs.pm: basic nfs/smb handling in diskdrake - fixes and function prototype removing - - * diskdrake.pm: basic nfs/smb handling in diskdrake - nicer mount options code (for autofs and supermount) - - * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount - - * interactive_gtk.pm: fix bug in box's height use - - * partition_table.pm, any.pm: fixes and function prototype removing - - * interactive.pm: readd the sorting based on size when no sorting is - precised - - * my_gtk.pm (n_line_size): bigger spacing for 'various' - - * standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb - handling in diskdrake - -2001/08/18 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm (n_line_size): bigger spacing for 'various' - enhance look, fix ask_fileW - - * fs.pm: basic nfs/smb handling in diskdrake - fixes and function prototype removing - (write_fstab): add notail for reiserfs partitions in any case - cleanup mounting options parsing - - * diskdrake.pm: basic nfs/smb handling in diskdrake - nicer mount options code (for autofs and supermount) - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - cleanup mounting options parsing - - * raid.pm: update the raid size as it should be - - * diskdrake_interactive.pm: basic nfs/smb handling in diskdrake - less verbose resize_reiserfs - update the raid size as it should be - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - - * fsedit.pm: basic nfs/smb handling in diskdrake - update the raid size as it should be - - * network/tools.pm: fix typo - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - - * partition_table.pm: fixes and function prototype removing - - * install_steps_interactive.pm, standalone/drakautoinst, proxy.pm, - install_interactive.pm, network/ethernet.pm, interactive_http.pm, - printerdrake.pm, Xconfigurator.pm, network/netconnect.pm, - network/network.pm, interactive_newt.pm, network/modem.pm: big renaming - of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered - in ask_from_ - - * standalone/diskdrake: basic nfs/smb handling in diskdrake - - * any.pm: fixes and function prototype removing - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - - * interactive_gtk.pm: fix bug in box's height use - better radiobox keyboard handling - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - enhance look, fix ask_fileW - - * interactive.pm: readd the sorting based on size when no sorting is - precised - big renaming of ask_from_entries_refH in ask_from and - ask_from_entries_refH_powered in ask_from_ - - * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount - do not use devfs with root software raid - -2001/08/18 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: fix pass $all_hds->{hds} instead of - $all_hds - -2001/08/18 siegel - - * share/po/de.po: new german version - - * standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm, - network/network.pm, raid.pm: fixed i18n - - * printerdrake.pm: i18n fixes - -2001/08/17 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm: use diskdrake_interactive instead of diskdrake - - * standalone/interactive_http/interactive_http.cgi: fix typo - restrict the progs callable to a few one. - - * standalone/interactive_http/index.html.pl, - standalone/interactive_http/index.html: autogenerate index.html - - * fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice - (with IA-like stripping of unused options) - - * c/stuff.xs.pm: is_ext3 is needed in standalone - Xtest not needed in standalone - - * c/Makefile.PL: is_ext3 is needed in standalone - - * standalone/interactive_http/miniserv.init, - standalone/interactive_http/Makefile: restrict the progs callable to a - few one. - - * Makefile.drakxtools: fix po not build, add interactive_http in DIRS - - * modules.pm: move back sunhme in sparc only - -2001/08/17 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone - - * interactive.pm, install2.pm: removed no_incon - - * standalone/net_monitor: added no internet connection configured label on - button - - * network/netconnect.pm, network/ethernet.pm: corrected connection script - creation - -2001/08/17 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm: use diskdrake_interactive instead of diskdrake - a hell lot of cleanup/rewrite: - * diskdrake_interactive created, diskdrake is now interactive aware - * added some documentation about the structure used for partitioning - * all_hds now contain the various hds, lvm, raid - * cleanup the isLVM, isRAID and alike functions - * field {type} in detect_devices is now {media_type} - * detect_devices::floppies is now floppies_dev - * removed old function prototypes - - * fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of - unused options) - a hell lot of cleanup/rewrite: - * diskdrake_interactive created, diskdrake is now interactive aware - * added some documentation about the structure used for partitioning - * all_hds now contain the various hds, lvm, raid - * cleanup the isLVM, isRAID and alike functions - * field {type} in detect_devices is now {media_type} - * detect_devices::floppies is now floppies_dev - * removed old function prototypes - - * install_steps_interactive.pm, install_steps_auto_install.pm, - install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm, - standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm, - any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell - lot of cleanup/rewrite: - * diskdrake_interactive created, diskdrake is now interactive aware - * added some documentation about the structure used for partitioning - * all_hds now contain the various hds, lvm, raid - * cleanup the isLVM, isRAID and alike functions - * field {type} in detect_devices is now {media_type} - * detect_devices::floppies is now floppies_dev - * removed old function prototypes - - * diskdrake_interactive.pm: add mount options choice (with IA-like - stripping of unused options) - (part_possible_actions): have possible actions sorted the way we want - (Type): fix ext2->ext3 detection - a hell lot of cleanup/rewrite: - * diskdrake_interactive created, diskdrake is now interactive aware - * added some documentation about the structure used for partitioning - * all_hds now contain the various hds, lvm, raid - * cleanup the isLVM, isRAID and alike functions - * field {type} in detect_devices is now {media_type} - * detect_devices::floppies is now floppies_dev - * removed old function prototypes - - * modules.pm: move back sunhme in sparc only - -2001/08/17 Till Kamppeter <till@mandrakesoft.com> - - * share/rpmsrate: Corrected listing of packages for printing in 'INSTALL' - section. - -2001/08/17 warly - - * share/rpmsrate: add package needed by the install in INSTALL - remove shapecfg and gpa - -2001/08/16 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed bug of CUPS not being installed during - installation - -2001/08/16 Pixel <pixel@mandrakesoft.com> - - * install2.pm, install_any.pm: add remove_unused to have more place for mo - files - -2001/08/16 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed bug of CUPS not being installed during - installation - -2001/08/16 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: add remove_unused to have more place for mo files - (getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the - unmounting at end of install to fail - - * install2.pm: add remove_unused to have more place for mo files - -2001/08/16 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type - -2001/08/16 warly - - * share/rpmsrate: add package needed by the install in INSTALL - -2001/08/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po: updated French file - - * share/po/sk.po: updated Slovak file - - * lang.pm: Added explicit setting of XFree86 internal XIM for Thai - -2001/08/16 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop - which caused the - unmounting at end of install to fail - -2001/08/16 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type - -2001/08/16 warly - - * share/rpmsrate: add package needed by the install in INSTALL - add kernel in INSTALL - s/DrakConf/drakconf/ - -2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian, - Italian and Korean files - - * share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and - Serbian files - -2001/08/15 Pixel <pixel@mandrakesoft.com> - - * standalone/diskdrake: oops reverting modifs commited by error - fix XkbOptions handling - - * standalone/keyboarddrake: fix XkbOptions handling - -2001/08/15 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm, printerdrake.pm: Let the "Options" button only appear when - the queue is Foomatic or with PPD (CUPS) - -2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean - files - - * share/po/es.po: updated spanish and Indonesian files - - * share/po/id.po: updated Indonesian, Italian and Korean files - updated spanish and Indonesian files - -2001/08/14 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: added options - -2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: oops, fix type of installing X or not - - fix choice of packages when auto install - - * Makefile.config: add drakautoinst in drakxtools standalone binaries - - * install_steps_interactive.pm, install2.pm: - - fix createBootdisk with auto - - fix setupBootloader with auto - - fix behaviour of draknet when auto-install - - remove auto flag when error-in-step - - * install_steps.pm, network/netconnect.pm: - - fix behaviour of draknet when auto-install - - remove auto flag when error-in-step - - * Xconfigurator.pm: fix automatic configuration - -2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po: updated Swedish file - -2001/08/14 Pixel <pixel@mandrakesoft.com> - - * devices.pm: add number-only device-name handling (eg: "801" is "sda1") - - * interactive_gtk.pm, interactive.pm: - - small fixes (esp. gtk sensitive handling) - - add ask_file - - add "gtk" preference field - - * my_gtk.pm: remove ask_file (was unused) - - * http.pm: cleanup to please perl_checker - - * Makefile (TAGS): add MDK/Common files - - * services.pm: cleanup (it was working, but wasn't nice) - -2001/08/14 dam's <damien@mandrakesoft.com> - - * standalone/draknet: corrected activation button - -2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: oops, fix type of installing X or not - - fix choice of packages when auto install - - * Makefile.config: add drakautoinst in drakxtools standalone binaries - - * install_steps_interactive.pm, install2.pm: - - fix createBootdisk with auto - - fix setupBootloader with auto - - fix behaviour of draknet when auto-install - - remove auto flag when error-in-step - - * install_steps.pm, network/netconnect.pm: - - fix behaviour of draknet when auto-install - - remove auto flag when error-in-step - - * Xconfigurator.pm: fix automatic configuration - -2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po: updated Swedish file - -2001/08/14 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: fix typo? - -2001/08/14 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Transfer queues non-interactively when switching - between LPD and LPRng. - -2001/08/14 dam's <damien@mandrakesoft.com> - - * standalone/draknet: corrected activation button - -2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps.pm, install_steps_interactive.pm, install2.pm, - network/netconnect.pm: - - fix behaviour of draknet when auto-install - - remove auto flag when error-in-step - - * Xconfigurator.pm: fix automatic configuration - - * install_any.pm: - - fix choice of packages when auto install - -2001/08/14 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: fix typo? - -2001/08/14 Till Kamppeter <till@mandrakesoft.com> - - * printer.pm: Removed superfluous lines. - - * printerdrake.pm: Transfer queues non-interactively when switching - between LPD and LPRng. - Wait message for queue transfer, manufacturer name bugfix - -2001/08/13 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage. - Removing old version of eepro100 (no stage1). - - * tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage. - -2001/08/13 dam's <damien@mandrakesoft.com> - - * interactive.pm: corrected 'no icon' - - * network/adsl.pm, network/netconnect.pm: adsl autodetection activated - (planq the children) - -2001/08/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather - than from .. - initial revision for drakautoinst - - put %installSteps in a separate package (steps.pm) (for drakxtools) - - use additional fields {auto} and {noauto}, by step, to ease - interactive auto install and oem stuff - - in install2.pm, perform each step either from the interactive class - or from install_steps, according to the {auto} flag - - id, tell each step to not try to be automatic if {noauto} - - in the install, have auto install bootdisk created in install_any so - we can always write a bootdisk (from install_steps) for further use from - drakautoinst in standalone - - interactive version of install_steps_auto_install is now inheriting - from the interactive class, so we can click on a previous automatic step - and have it interactively during an interactive auto install - - * install_steps.pm, install_steps_interactive.pm, - install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm: - initial revision for drakautoinst - - put %installSteps in a separate package (steps.pm) (for drakxtools) - - use additional fields {auto} and {noauto}, by step, to ease - interactive auto install and oem stuff - - in install2.pm, perform each step either from the interactive class - or from install_steps, according to the {auto} flag - - id, tell each step to not try to be automatic if {noauto} - - in the install, have auto install bootdisk created in install_any so - we can always write a bootdisk (from install_steps) for further use from - drakautoinst in standalone - - interactive version of install_steps_auto_install is now inheriting - from the interactive class, so we can click on a previous automatic step - and have it interactively during an interactive auto install - -2001/08/13 Pixel <pixel@mandrakesoft.com> - - * install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm: - auto_inst enhancements - - * install_steps_interactive.pm, standalone/XFdrake, install_steps.pm, - Xconfigurator.pm: really use a class_discard for Xconfigurator::main - - * devices.pm: add /dev/hd[mt] handling - -2001/08/13 siegel - - * share/po/de.po: new german version - -2001/08/13 Till Kamppeter <till@mandrakesoft.com> - - * printerdrake.pm: Automatic transfer of queues when changing the spooler. - Update printer queue list when exiting during install, so that the - "Summary" entry is correct. - When one sayd "No" on the test page, the modify dialog was not pointing - to the current printer - - * printer.pm: Automatic transfer of queues when changing the spooler. - The photo test page was not printed during installation. - - * interactive.pm: Tree lists are sorted again now. - -2001/08/13 yduret - - * standalone/drakxconf: removed diskdrake from the choice - -2001/08/12 dam's <damien@mandrakesoft.com> - - * standalone/draknet: longer timeout - -2001/08/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fix ortograf typo - -2001/08/12 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile: po->mo is no longer gonna be nasty with us - - * interactive_gtk.pm: clean the nice till fix - - * tools/cvslog2changelog.pl: add till - - * Makefile: ensure locales.tar.bz2 in perl-install/share is build - po->mo is no longer gonna be nasty with us - -2001/08/12 Till Kamppeter <till@mandrakesoft.com> - - * interactive.pm: Lists get only sorted when the "sort" option is given. - - * printer.pm, printerdrake.pm: Check files before checking RPM database => - Acceleration, waiting windows - -2001/08/11 dam's <damien@mandrakesoft.com> - - * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc, - share/themes/mdk-bg.png: new theme for beta - - * share/theme-editor.pl: updated - now works. - -2001/08/11 tkamppeter - - * printer.pm, printerdrake.pm: Restructuring continued and debugged - -2001/08/10 dam's <damien@mandrakesoft.com> - - * share/theme-editor.pl: added theme editor - - * network/tools.pm: corrected password file substitution - - * network/ethernet.pm: remove Data::Dumper - - * network/netconnect.pm: added spped and timeout handling for isdn - - * any.pm: corrected autologin question - - * network/isdn.pm: tomeout option deactivated. - - * standalone/draknet: corrected internet cnfiguration pop up, and some - other studds - ifup/down ethx, anew pixmap for list - - * my_gtk.pm: removed Datta::Dump use - - * pixmaps/eth_card_mini2.png: added - -2001/08/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: small font fix - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - - * share/po/bg.po: updated Bulgarian file - updated pot file - -2001/08/10 yduret - - * bootlook.pm: corrected vnew usage (thx gc) - -2001/08/09 dam's <damien@mandrakesoft.com> - - * standalone/draknet: added missing use - added pixmap for eth. Some factorisation - - * network/tools.pm: added useless function type2interface for future use - - * my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for - standalone mode. - - * network/isdn.pm: labels corrections - -2001/08/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake, - standalone/drakxservices, standalone/net_monitor, standalone/draknet, - standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake, - standalone/drakxconf, standalone/adduserdrake, standalone/livedrake, - standalone/drakboot, standalone/draksec: use vnew the right way - everywhere - - * standalone/drakgw: use vnew the right way everywhere - - if package installs fail, redo one by one to know which one failed - - try to not end up with a failing configuration file, if program is - brutally stopped - - if unrecognized config file, don't fail, rather ignore it and - proceed - - run dhcpd_update feature (if present) after setup of dhcp server - - * share/rpmsrate: put traceroute in network client also, for claudio - -2001/08/09 Pixel <pixel@mandrakesoft.com> - - * standalone.pm, install_any.pm: rename interactive_pkgs in - pkgs_interactive - -2001/08/09 siegel - - * standalone/interactive_http/miniserv.logrotate, - standalone/interactive_http/Makefile: Added logrotate for - "/var/log/drakxtools_http.log" - -2001/08/09 tkamppeter - - * printer.pm, printerdrake.pm: New structure for queue modification, - general structure clean-up - -2001/08/09 yduret - - * bootlook.pm: readded in->do_pkg->install (i sux) - rewrite in a more drakx fashion - - * my_gtk.pm: added gtkset_sensitive in wrapper.. - -2001/08/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file - -2001/08/08 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: typo - makes interactive_pkgs stuff work - add interactive_pkgs stuff - - * Makefile: skip module CGI in test_pms (perl_checker) - - * fsedit.pm (check_mntpoint): remove /root from directories that "should - remain within the root filesystem" - - * proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm, - printerdrake.pm, standalone/drakgw, standalone/draknet, - network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy, - standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake, - network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add - interactive_pkgs stuff - - * install_steps_interactive.pm: installing foomatic before doing anything - about printer - add interactive_pkgs stuff - - * Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work - add interactive_pkgs stuff - - * install_any.pm (remove, remove_nodeps): fix typo - makes interactive_pkgs stuff work - add interactive_pkgs stuff - -2001/08/08 tkamppeter - - * install_steps_interactive.pm: Installation fitted to new printerdrake - - * printer.pm: Different choosable test pages available now - Corrected init script calls in the (start|stop|restart)_service - functions - - * printerdrake.pm: Different choosable test pages available now - Removed superfluous line in install_spooler function - -2001/08/08 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (naughtyServers): add drakxtools-http - -2001/08/07 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: nex features - - * network/netconnect.pm: removed debugging message - - * network/isdn.pm: corrected pkgs use -> require - - * my_gtk.pm: added gtkset_relief - - * pixmaps/network.png, pixmaps/draknet_step.png: added - -2001/08/07 Pixel <pixel@mandrakesoft.com> - - * pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb - removing for re-adding with -kb - -2001/08/07 tkamppeter - - * printer.pm, printerdrake.pm: Automatic installation of all needed - packages - -2001/08/07 dam's <damien@mandrakesoft.com> - - * standalone/draknet: corrected label - - * network/netconnect.pm: removed debugging message - - * standalone/net_monitor: nex features - added color choice - lot of improvments - - * network/isdn.pm: corrected pkgs use -> require - - * my_gtk.pm: added gtkset_relief - - * pixmaps/network.png, pixmaps/draknet_step.png: added - -2001/08/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/tools.c: say that it's a data read error, when we can't load - the ramdisk - - * mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system - wide bzlib.h but our own provided one - -2001/08/07 Pixel <pixel@mandrakesoft.com> - - * rescue/tree/etc/issue: fix distrib number - - * interactive.pm: adding http feature, mainly for standalone tools - - * standalone/miniserv.pem, standalone/miniserv.pl: Initial revision - import - - * standalone/interactive_http/miniserv.pl: add interactive_http - Initial revision - - * resize_fat/main.pm: fix - - * partition_table.pm: nicer names for journalised fs - - * Makefile.drakxtools, standalone/interactive_http/miniserv.init, - standalone/interactive_http/index.html, - standalone/interactive_http/interactive_http.cgi, - standalone/interactive_http/miniserv.conf, - standalone/interactive_http/miniserv.pam, - standalone/interactive_http/miniserv.users, Makefile, - standalone/interactive_http/Makefile: add interactive_http - - * interactive_http.pm, standalone/interactive_http.cgi: add - interactive_http - adding http feature, mainly for standalone tools - - * share/diskdrake.rc: have every journalised in darkred - - * c/stuff.xs.pm: add S_IFIFO - - * standalone/interactive_http/miniserv.pem: Initial revision - -2001/08/06 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: debugging, profile coding, isdn 128 debugging - corrected gtkradio : shift instead of pop - - * interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift - instead of pop - - * network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging, - profile coding, isdn 128 debugging - -2001/08/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * tools/i386/busybox: try a busybox with better globbing under the SHELL - -2001/08/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net> - - * share/po/vi.po: updated Vietnamese file - -2001/08/06 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm: kernel_arch removed - - * fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc) - - * interactive_gtk.pm, interactive_newt.pm: cleanup, functions already - defined in interactive - -2001/08/06 yduret - - * tinyfirewall.pm: use MDK::Common; - use network::netconnect; - - * standalone/drakgw: use MDK::Common; - use network::netconnect; and update functions call from netconnect - -2001/08/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eo.po: updated Esperanto file - -2001/08/05 Pixel <pixel@mandrakesoft.com> - - * install_steps_auto_install.pm: switch to gtk install when - interactiveSteps is defined - -2001/08/05 tkamppeter - - * printer.pm, printerdrake.pm: Automatic installation and start of the - desired printer spooler - -2001/08/04 Pixel <pixel@mandrakesoft.com> - - * share/list: add tune2fs enabling switching from ext2 to ext3 - - * fs.pm, fsedit.pm, partition_table.pm: add ext3 support - - * diskdrake.pm: add ext3 support - (Type): handle lossless switch from ext2 to ext3 - - * pkgs.pm: make perl_checker happy - - * c/stuff.xs.pm, c/Makefile.PL: add is_ext3 - - * common.pm: moved arch() and alike to MDK::Common::System - -2001/08/04 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (choosePackages): simplify, fix - setSelectedFromCompssList not called in - expert even the first_time (especially nasty for auto_installs) - - * fs.pm, partition_table.pm, fsedit.pm: add ext3 support - - * diskdrake.pm: add ext3 support - (Type): handle lossless switch from ext2 to ext3 - - * install_steps_gtk.pm: add the feather feature, but do not enable it - - * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/ - (wait_msg doesn't - exist anywhere, it must be a fpons typo) - - * pkgs.pm: make perl_checker happy - - * c/stuff.xs.pm, c/Makefile.PL: add is_ext3 - - * bootloader.pm: as when lilo is selected, we don't try to install grub, - just create the - config file in case it may be useful - - * common.pm: moved arch() and alike to MDK::Common::System - - * partition_table_raw.pm: add yaboot detection - - * install_any.pm, share/rpmsrate: create a new flags "X" selected by - default, contain what X related packages - which were in "SYSTEM" - -2001/08/04 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (choosePackages): simplify, fix - setSelectedFromCompssList not called in - expert even the first_time (especially nasty for auto_installs) - - * install_steps_gtk.pm: add the feather feature, but do not enable it - - * bootloader.pm: as when lilo is selected, we don't try to install grub, - just create the - config file in case it may be useful - - * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/ - (wait_msg doesn't - exist anywhere, it must be a fpons typo) - - * share/rpmsrate, install_any.pm: create a new flags "X" selected by - default, contain what X related packages - which were in "SYSTEM" - -2001/08/03 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor, network/tools.pm, network/netconnect.pm, - network/isdn.pm: debugging, 128Kb/s ISDN - - * Makefile.drakxtools, Makefile: added network pms - -2001/08/03 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm: typo fix - replace isJfs/isXfs/... with isThisFs("jfs" - - * install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs" - update_userkderc is now called update_gnomekderc - - * Makefile: better po skipping - - * commands.pm (sync): (re-?)add - - * fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm: - replace isJfs/isXfs/... with isThisFs("jfs" - - * fsedit.pm (check_mntpoint): /root should remain within the root - filesystem - - * install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr - update_userkderc is now called update_gnomekderc - -2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/adsl.c: - - fix problem of clashing user/pass between adsl and ftp/http in case - of automatic installs - - update doc on automatic install parameters (doc/TECH-INFOS) - - * mdk-stage1/doc/TECH-INFOS: - - small update - - fix problem of clashing user/pass between adsl and ftp/http in case - of automatic installs - - update doc on automatic install parameters (doc/TECH-INFOS) - -2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - -2001/08/02 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm, services.pm, install_interactive.pm, - network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of - testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk - is in ISA of the object - - * partition_table.pm, fsedit.pm, diskdrake.pm: JFS support - -2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/adsl.c: - - fix problem of clashing user/pass between adsl and ftp/http in case - of automatic installs - - update doc on automatic install parameters (doc/TECH-INFOS) - - * mdk-stage1/doc/TECH-INFOS: - - small update - - fix problem of clashing user/pass between adsl and ftp/http in case - of automatic installs - - update doc on automatic install parameters (doc/TECH-INFOS) - -2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - -2001/08/02 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: instead of testing if ref($in) or ref($o) contains - /gtk/, test if interactive_gtk is in ISA of the object - add jfs support - - * install_steps_interactive.pm, services.pm, install_interactive.pm, - network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in) - or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the - object - - * partition_table.pm: JFS support - add jfs support - - * fsedit.pm, diskdrake.pm: JFS support - - * tools/ntp_servers.pl, timezone.pm: update ntp servers list - - * fs.pm, share/list: add jfs support - -2001/08/02 Pixel <pixel@mandrakesoft.com> - - * tools/ntp_servers.pl, timezone.pm: update ntp servers list - - * fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support - -2001/08/01 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: write_on_text writes in blue instead of black - - * network/isdn.pm: typo - added de-installation before installateion - - * network/netconnect.pm: translation correction - -2001/08/01 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, fsedit.pm: handle auto_allocate_raids for - auto_installs - - * raid.pm (new): now works with a list of partitions - -2001/08/01 tkamppeter - - * printer.pm: Fixed bug in recognizing the printer ID in the Foomatic - overview. - -2001/08/01 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: write_on_text writes in blue instead of black - - * network/isdn.pm: typo - added de-installation before installateion - - * network/netconnect.pm: translation correction - -2001/08/01 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, fsedit.pm: handle auto_allocate_raids for - auto_installs - - * raid.pm (new): now works with a list of partitions - -2001/07/31 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: added splash screen between different - configurations. Added splash wizard mode - added intro step for each configuration type. - - * network/tools.pm: corrected ask_connect_now - - * my_gtk.pm: added write_on pixmap : a function to write text on pixma, - using fonts. - - * network/ethernet.pm: added intro step for each configuration type. - -2001/07/31 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_steps_interactive.pm: after copying the auto install floppy, - sync in case you shall remove the - floppy right after the LED switches off yet the kernel decides to not - flush - everything - - * modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet - installs - - * bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux - so..) - -2001/07/31 Pixel <pixel@mandrakesoft.com> - - * common.pm (translate): empty string translation is an empty string - - * install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/ - - * share/rpmsrate: add cpio - lower gurpmi (5->4) - - * share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale - support - better handling of locales - - * Makefile.drakxtools (install): s/cp -rf/cp -rfL/ (-L = --dereference, - aka always follow symbolic links) - - * install_steps_gtk.pm (installPackages): make $show_advertising a global - state (for Vincent Meyer) - - * share/Makefile, Makefile: better handling of locales - - * install_steps_auto_install.pm: remove bad prototype - -2001/07/30 dam's <damien@mandrakesoft.com> - - * network/ethernet.pm: added cable internet connection selection - added internet connection selection in case of multiple configurations - - * network/netconnect.pm: corrected ask_connect_now behaviour - corrected ask_connect_now - debug - added internet connection selection in case of multiple configurations - - * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm: - corrected ask_connect_now - added internet connection selection in case of multiple configurations - -2001/07/30 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as - hdlist files" - occurs when the hdlists are in fact not available - - * share/locales.tar.bz2.ppc, share/locales.tar.bz2, - share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh, - share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2 - based on installed glibc - - * printer.pm, printerdrake.pm: use MDK::Common - i wonder why it was included and Till used an older version without - merging? - - * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done - yet) - - * share/rpmsrate: raise rxvt (4->5) - lower rpmdrake & harddrake (5->4) - remove rootfiles (unneeded) - - * Makefile: use -excludeMDK::Common::Globals for perl_checker - automatic handling of locales.tar.bz2 based on installed glibc - -2001/07/30 tkamppeter - - * printer.pm, printerdrake.pm: In beginners mode one chooses only the - printer, not the driver (default driver) - -2001/07/30 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm: debug - added internet connection selection in case of multiple configurations - - * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm: - added internet connection selection in case of multiple configurations - - * network/ethernet.pm: added cable internet connection selection - added internet connection selection in case of multiple configurations - -2001/07/30 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h: - have a memory limit also for Rescue (different one) - -2001/07/30 Pixel <pixel@mandrakesoft.com> - - * printer.pm, printerdrake.pm: use MDK::Common - i wonder why it was included and Till used an older version without - merging? - - * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done - yet) - - * share/rpmsrate: raise rxvt (4->5) - lower rpmdrake & harddrake (5->4) - remove rootfiles (unneeded) - - * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as - hdlist files" - occurs when the hdlists are in fact not available - - * Makefile: use -excludeMDK::Common::Globals for perl_checker - automatic handling of locales.tar.bz2 based on installed glibc - - * share/locales.tar.bz2.ppc, share/locales.tar.bz2, - share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh, - share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2 - based on installed glibc - -2001/07/28 tkamppeter - - * printer.pm, printerdrake.pm: Support for PPD files of PostScript - printers (when CUPS is used) - -2001/07/27 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree - is seen as a package. - - * interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on - cancel (previously always 1). - added a before leaving code to clean added reference (else it seems to - bahave - strangely on changing steps). - fixed wrong reference to added icons to ask_browse_tree_info_refW. - - * services.pm: allow cancel on services which do not change anything. - - * install_steps_interactive.pm: changed warn dialog to okcancel dialog - when asking user to insert Boot floppy - used or Update Modules floppy (die may cause to rerun install else). - -2001/07/27 gbeauchesne - - * install_steps_gtk.pm: - - install_steps_gtk.pm (launchX) : create /var/log, if not existent, - for - XFree86.log - -2001/07/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules.c: allow to escape from Update Modules if you don't - want to insert an ext2 floppy - Disk -> Floppy for Update Modules disk - -2001/07/27 Stew Benedict <sbenedict@mandrakesoft.com> - - * share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm, - Xconfigurator.pm: last of sync with PPC beta mods - -2001/07/27 tkamppeter - - * standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake - changed to use Foomatic, driver options, spooler change - -2001/07/26 dam's <damien@mandrakesoft.com> - - * network/isdn.pm: added firmware loading/configuration - not loading the module at detection. - - * standalone/draknet: MDK::common correction - - * modules.pm: added default option id="HiSax" to isdn module - -2001/07/26 fcrozat - - * share/po/fr.po: Fix spelling of 'molette' - -2001/07/26 François Pons <fpons@mandrakesoft.com> - - * install2.pm: added blank and updatemodules options to DrakX. - - * bootloader.pm: added prioritary kernel entry 'default' as the kernel - typically copied from a - modified blank.img file with a kernel (no initrd.img necessary to - build). - This kernel takes precedance over any other kernel. - - * install_steps_interactive.pm: really fixes Diskette with Floppy. - fix typo as Diskette to Floppy. - add support for new modules load as described by GG. - - * install_steps.pm: fixed some silly typo and tiny bugs. - fixed typo as Diskette to Floppy. - add support for modified blank.img floppy and Update Modules floppy. - In first case copy kernel to /boot/vmlinuz-default to be taken into - account by - bootloader suggestion method. - In second case, check installed kernel and update any modules listed in - the - Update Modules floppy. - -2001/07/26 gbeauchesne - - * bootloader.pm: - - Don't set "lba32" on ia64 - -2001/07/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass - "--blank" to DrakX when module loading is disabled - - add "changedisk" feature - - add "updatemodules" feature - - * mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: - - add "changedisk" feature - - add "updatemodules" feature - - * mdk-stage1/probing.c: silently load usb controllers - -2001/07/25 dam's <damien@mandrakesoft.com> - - * standalone/draknet: fixed new network organization - - * standalone/net_monitor: updated. Profile handling. - - * network/isdn_consts.pm: updated ISDN detection. Added firmware handling - and drivers other than hisax - -2001/07/25 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed no test (or die test) to void package read on depslist - (allowed to keep - package indexing good on multi-arch). - cleaned code to examine depslist.ordered and packages list. - - * rescue/make_rescue_img: fixed to use perl-MDK-Common. - - * tools/syncrpms: fixed still missing rpmtools:: before a version_compare - ... - -2001/07/25 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules_descr.h: small typo - - * mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting - -2001/07/25 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile (install): build mo's - - * commands: move to MDK::Common, bool->to_bool - - * common.pm: do not export sync, keep it in common (esp. so that it - doesn't conflict with my_gtk::sync - (removeXiBSuffix): add TB (tera) - - * share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common - - * share/verify_modules.pl: new common syntax - - * Makefile: - - temporary hack to have at least good UTF-8 based locales (otherwise - rpmlib segfaults) - - touch share/po/*.po, so that they are not rebuilded (pablo takes - care of them) - - * share/list: add MDK::Common::Globals - - * partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm, - install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not - export sync, keep it in common (esp. so that it doesn't conflict with - my_gtk::sync - -2001/07/25 Stew Benedict <sbenedict@mandrakesoft.com> - - * mdk-stage1/modules_descr.h: add decriptions for integrated Apple - Network/SCSI hardware - -2001/07/24 dam's <damien@mandrakesoft.com> - - * network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm: - corrected speed fax + PCI, updated configuration - -2001/07/24 daouda - - * bootlook.pm: better runlevel handling -> persistent level choice - -2001/07/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file - -2001/07/24 Pixel <pixel@mandrakesoft.com> - - * commands.pm: move to MDK::Common, bool->to_bool - fix syntax - removed/renamed unused/seldom-used functions - generalize the use of chomp_ as the functional alternative to chomp (and - works on lists) - - * swap.pm: temporary hack to have at least good UTF-8 based locales - (otherwise rpmlib segfaults) - move to MDK::Common, bool->to_bool - - * unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the - functional alternative to chomp (and works on lists) - - * globals.pm, perl2fcalls: - - globals is now MDK::Common::Globals - - perl2fcalls is now /usr/bin/perl_checker - - * install_steps_gtk.pm: move to MDK::Common, bool->to_bool - move to MDK::Common, bool->to_bool - removed/renamed unused/seldom-used functions - - * common.pm: move to MDK::Common, bool->to_bool - cleanup (remove unused stuff and dangerous prototypes) - removed/renamed unused/seldom-used functions - generalize the use of chomp_ as the functional alternative to chomp (and - works on lists) - - * network/tools.pm, network/adsl.pm, network/netconnect.pm, - network/ethernet.pm, network/isdn.pm, network/modem.pm: - - globals is now MDK::Common::Globals - - perl2fcalls is now /usr/bin/perl_checker - move to MDK::Common, bool->to_bool - - * partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm, - standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm, - partition_table_mac.pm, standalone/mousedrake, devices.pm, - install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm, - install_steps_stdio.pm, loopback.pm, resize_fat/any.pm, - standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm, - interactive_gtk.pm, standalone/drakxservices, fsedit.pm, - network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm, - resize_fat/directory.pm, standalone/net_monitor, - install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm, - lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec, - standalone/drakxconf, resize_fat/info_sector.pm, - standalone/adduserdrake, sbus_probing/main.pm, printer.pm, - partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm, - Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm, - standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm, - interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm, - bootloader.pm: move to MDK::Common, bool->to_bool - - * services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool - removed/renamed unused/seldom-used functions - - * standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm, - detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool - generalize the use of chomp_ as the functional alternative to chomp (and - works on lists) - - * Makefile: temporary hack to have at least good UTF-8 based locales - (otherwise rpmlib segfaults) - move to MDK::Common, bool->to_bool - move to MDK::Common, bool->to_bool - -2001/07/23 dam's <damien@mandrakesoft.com> - - * modules.pm, network/tools.pm, network/isdn_consts.pm, - network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light. - Only 64kb/s and still some debuf stuff to be fixed. - -2001/07/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files - -2001/07/23 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: cleanup - - * c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile, - tools/make_mdkinst_stage2, lang.pm, share/po/Makefile, - share/po/.cvsignore: do not use the po's directly. Use mo's through - gettext - -2001/07/22 dam's <damien@mandrakesoft.com> - - * network/netconnect.pm, network/isdn.pm: updated isdn config, moved - isdn_data from netconnect_const to isdn_const - big work on isdn. Not finished - - * modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm: - big work on isdn. Not finished - - * network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn - config, moved isdn_data from netconnect_const to isdn_const - -2001/07/20 François Pons <fpons@mandrakesoft.com> - - * docs/README.pxe: initial release, dhcpd and tftpd only. - -2001/07/20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/el.po: updated Greek file - -2001/07/20 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl - - * lang.pm: fix - (load_po): enhance readability - - * share/po/fake_c.pl: cleanup - externalize the pm 2 pm_.c in fake_c.pl - - * common.pm (translate): basic plural forms handling (not finished) - - * help.pm: fix missing ``"'' - - * bootloader.pm: fix - (install_lilo): order fat partitions first - -2001/07/19 dam's <damien@mandrakesoft.com> - - * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc, - share/help.png: new color - - * network/netconnect.pm: correct bug. thanx to the little stagiaire. - -2001/07/19 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new - graphic logo for 8.1 - -2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, - share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po, - share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po, - share/po/eu.po: updated Croatian file - -2001/07/19 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new - graphic logo for 8.1 - - * Xconfigurator.pm: fixed problable freeze on pci probe. - -2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, - share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po, - share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po, - share/po/eu.po: updated Croatian file - -2001/07/19 Pixel <pixel@mandrakesoft.com> - - * globals.pm: no strict 'refs' instead of 'vars' - - * services.pm: rename ask_install_gtk in ask_install, ask_install is now - ask_install_simple (obsolete) - - * install_steps_auto_install.pm: fix exit install in graphical - auto_install's - -2001/07/19 Pixel <pixel@mandrakesoft.com> - - * install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based - on Michael Brown <mbrown@fensystems.co.uk> patch: - - enables graphical steps in auto_installs for more than gtk - - various cleanup - - * globals.pm: no strict 'refs' instead of 'vars' - - * services.pm: rename ask_install_gtk in ask_install, ask_install is now - ask_install_simple (obsolete) - -2001/07/18 mbadaire - - * modules.pm, install_any.pm, bootloader.pm: IA64 adaptation - -2001/07/18 Stew Benedict <sbenedict@mandrakesoft.com> - - * modules.pm, install_steps.pm, install_steps_interactive.pm, - tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm, - diskdrake.pm: roll back some changes from PPC beta - OldWorld vs - NewWorld bootloader - modem detection on ttyS0, new sound module in 2.4.4 - -2001/07/17 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4 - and S3 ViRGE on reboot - with Aurora). - - * Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test - for these card. - -2001/07/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no - more used) - - * keyboard.pm: small keyboard changes - -2001/07/13 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/po/fr.po: update - -2001/07/12 François Pons <fpons@mandrakesoft.com> - - * fs.pm: fixed wrong examination of fsck return code (exit code 1 says - fsck succeeded in - fixing partition and now is ok). - - * run_program.pm: changed exit code of failed exec in rooted to 128 - instead of 1 (may clash with - exit code of fsck else). - - * any.pm: fixed bug for writing in /etc/sysconfig/desktop file. - -2001/07/12 François Pons <fpons@mandrakesoft.com> - - * interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW - (default). - - * services.pm: reworked to use new service layout for install. - - * install_steps_gtk.pm: use common code for tree with info dialog - (individual package selection). - - * fs.pm: fixed wrong examination of fsck return code (exit code 1 says - fsck succeeded in - fixing partition and now is ok). - - * interactive_gtk.pm: merging common code for individual package selection - and service to create - ask_browse_tree_info_refW, added featrures for group icon always - up-to-date - (take some memory but not too much, not used if flat model). - - * run_program.pm: changed exit code of failed exec in rooted to 128 - instead of 1 (may clash with - exit code of fsck else). - - * any.pm: fixed bug for writing in /etc/sysconfig/desktop file. - -2001/07/10 Stew Benedict <sbenedict@mandrakesoft.com> - - * mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build, - define TIOCSCTTY, Makefile mods - -2001/07/09 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: added multiple tries if a transaction of only one package - fails. - - * install_any.pm: added LDAP support for authentication. - - * install_steps_interactive.pm: added LDAP support for password - authentication, updated root password window look. - - * bootloader.pm: fixed compilation error. - removed compilation error, the resolution is not quite good and may be - reworked :-) - - * help.pm: updated root password help. - -2001/07/09 mbadaire - - * bootloader.pm: modify lilo.conf to elilo.conf if arch ia64 - - * common.pm: Add IA64 support - -2001/07/08 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that - boot partition is - set correctly again - -2001/07/08 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that - boot partition is - set correctly again - -2001/07/06 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed selected_leaves. change algorithm as previous one can - still causes dead - lock and may not reproduce correct list. take care of choice that need - to be - examined before else another package may be chosen if choice is not - satisfied - when selecting packages. - - * install_any.pm: change all 8 space into a tabulation, this is simple and - may change visual - aspect but it gives correct output and filesize by 40%. - -2001/07/06 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed selected_leaves. change algorithm as previous one can - still causes dead - lock and may not reproduce correct list. take care of choice that need - to be - examined before else another package may be chosen if choice is not - satisfied - when selecting packages. - - * install_any.pm: change all 8 space into a tabulation, this is simple and - may change visual - aspect but it gives correct output and filesize by 40%. - -2001/07/06 Pixel <pixel@mandrakesoft.com> - - * tools/ntp_servers.pl: some workarounds - -2001/07/06 Pixel <pixel@mandrakesoft.com> - - * tools/ntp_servers.pl: some workarounds - -2001/07/05 François Pons <fpons@mandrakesoft.com> - - * keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a - laptop is detected. - -2001/07/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules_descr.h: add usb net descriptions - -2001/07/05 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm (file2part): created - - * any.pm: ia64 bootloader configuration adaptations - - * bootloader.pm: typo fix - ia64 bootloader configuration adaptations - -2001/07/04 dam's <damien@mandrakesoft.com> - - * globals.pm: added error handling - - * network/netconnect.pm, network/ethernet.pm: modularized. It compiles, - runs, and works for some stuff. - modularization continuated - updated CVS: - ---------------------------------------------------------------------- - uses the fantastic global module. - corrected - - * standalone/draknet: corrected - - * network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and - works for some stuff. - updated CVS: - ---------------------------------------------------------------------- - uses the fantastic global module. - corrected - - * network/network.pm: modularized. It compiles, runs, and works for some - stuff. - modularization continuated - - * network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and - works for some stuff. - updated CVS: - ---------------------------------------------------------------------- - uses the fantastic global module. - - * docs/net_object_class.fig: updated doc - -2001/07/04 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added missing last Card read from Cards+ file. - allow S3 card to have VideoRam uncommented, fix 86c368 video driver that - seems - needing VideoRam too. - fixed need of video ram if 86c368 and S3 ViRGE. - - * install_any.pm: another too wide string truncated to 80 chars. - make auto_inst.cfg file no longer than 80 chars wide. - - * install_steps_interactive.pm: added back timezone settings (thanks - FredC). - -2001/07/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*" - - * mdk-stage1/newt-frontend.c: very nice things happen when you hardcode - arrays to a too small value - - * docs/HACKING: update -d in order to get all the directories... - -2001/07/04 mbadaire - - * tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64, - tools/ia64/e2fsck.shared: Ia64 Adaptation - - * install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list, - share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64 - adaptation - -2001/07/04 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (selected_leaves): fix dead-loop - (selected_leaves): make it work with loops (eg: mandrake_desk loops with - control-center resulting on none of them being a leaf) - - * perl2fcalls: check exclude_uses before reporting bad use of "use" - exclude module globals from use's to look at - - * globals.pm (import): yet another fix - fix a pb when init is called before another import - typo correction - enhanced: shared values are grouped together based on a name - module to share constant values between modules - - * fsedit.pm: add /boot/efi in suggestions for ia64 - - * install_interactive.pm, install_steps.pm: fix typo - verify a /boot/efi partition exists - - * Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list, - share/list.sparc: remove busybox as default shell. Only use it as the - interactive shell on tty2 - -2001/07/03 dam's <damien@mandrakesoft.com> - - * network/adsl.pm, network/netconnect_consts.pm, network/tools.pm, - network/modem.pm, network/netconnect.pm, network/isdn.pm: network - subsystem now compiles. Enjoy - - * docs/net_object_class.fig: documentation about net modules structure - -2001/07/03 François Pons <fpons@mandrakesoft.com> - - * network/netconnect.pm: fix another dam's sucks - fix dam's sucks - - * network/netconnect_consts.pm, Makefile.config: fix dam's sucks - - * standalone/XFdrake: expert is allowed to choose frame buffer. - - * install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage - package selection file used by - auto_install too from packages tree directly on floppies. - - * share/floppy.png: updated size to 16x22 to be more aligned. - for loading/saving packages selection. - - * install_any.pm: modified g_default_packages to be used from package tree - save on floppy. - - * install_steps_gtk.pm: added Load/Save on floppy. - added improve choice of package, well not very usefull but asked by - higher - people :-) - -2001/07/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/rp-pppoe/gui/html/props-basic.png, - mdk-stage1/rp-pppoe/gui/html/props-options.png, - mdk-stage1/rp-pppoe/gui/html/props-advanced.png, - mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png, - mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png, - mdk-stage1/rp-pppoe/gui/html/mainwin.png, - mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop - - * modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore, - mdk-stage1/usb-resource/Makefile, - mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile, - mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support - for install from USB Network Adapters - -2001/07/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po, - share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po, - share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po, - share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po, - share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file - -2001/07/03 Pixel <pixel@mandrakesoft.com> - - * timezone.pm (configureTimezone): propose a list of NTP servers - (ntp_server): fix - add ntp handling - - * fs.pm (mount): fix fsck.ext2'ing - (mount): add fsck.ext2 before ext2-mounting - - * share/themes/DarkMarble-gloom2.png: re-adding with -kb - re-adding with -kb - - * pixmaps/user.png: re-adding with -kb - removing for re-adding with -kb - re-adding with -kb - removing for re-adding with -kb - - * share/themes/blueHeart-button4.png, share/reload.png, - share/themes/focus.png, share/themes/DarkMarble-button3_in.png, - share/logo-mandrake.png, share/themes/marble3d-check1.png, - share/themes/blueHeart-button_def.png, share/rpm-semiselected.png, - share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png, - share/rpm-installed.png, share/themes/marble3d-button1.png, - share/logo-mandrake_sav.png, share/themes/mdk-button1.png, - share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png, - share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png, - share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png, - pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png, - share/themes/marble3d-button4.png, pixmaps/bootloader.png, - share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png, - share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png, - share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png, - share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png, - pixmaps/rootpasswd.png, share/help.png, - share/themes/DarkMarble-check_on.png, - share/themes/blueHeart-button1.png, pixmaps/keyboard.png, - pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png, - share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png, - pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb - removing for re-adding with -kb - - * install_any.pm, install_steps.pm: add ntp handling - - * tools/addchangelog.pl: reverted the last erroneous modif - re-adding with -kb - - * tools/ntp_servers.pl: get a formatted list of NTP servers from an - authorised source - - * install_steps_interactive.pm (doPartitionDisks): better error message - when no root partition is found - (configureTimezone): propose a list of NTP servers - add ntp handling - - * docs/comparisons: re-adding with -kb - -2001/07/02 dam's <damien@mandrakesoft.com> - - * install_steps_interactive.pm: new network sources reorganizationCVS: - ---------------------------------------------------------------------- - - * share/list: added modinfo - - * modparm.pm: syntax correction - - * network/netconnect_consts.pm, network.pm, standalone/draknet, - network/tools.pm, netconnect.pm, network/netconnect.pm, - network/ethernet.pm, network/isdn.pm, network/adsl.pm, - network/network.pm, network/modem.pm, netconnect_consts.pm: new network - sources reorganization - -2001/07/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: update po files - -2001/07/02 Pixel <pixel@mandrakesoft.com> - - * crypto.pm: remove buggy prototype - - * share/po/Makefile: yet even better i18n strings extraction - - fix to add some missing messages - - add more verif - - * c/stuff.xs.pm: use size_t instead of int where it should - - * Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in - XF3) - - * share/po/b_dump_strings.pm: high level i18n messages getting. only - partial stuff. Used only for verification - - * perl2fcalls: add handling of using pkg::func when func is provided by - pkg2 use'd by pkg - -2001/06/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/id.po: updated Indonesian file - -2001/06/25 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm: switch from llseek to lseek64 - -2001/06/23 siegel - - * share/po/de.po: new german version - -2001/06/22 François Pons <fpons@mandrakesoft.com> - - * bootloader.pm: take care of enterprise kernel if installed. - - * install_any.pm: automagically install kernel-enterprise if memory is - greater than 800MB. - -2001/06/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: unfuzzyise - -2001/06/22 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm, - share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, - share/po/it.po, share/po/id.po, install_steps_interactive.pm, - share/po/pl.po, share/po/no.po, share/po/fi.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po, - share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/ - -2001/06/21 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: added minimal support for rpmtools >= 3.0 - -2001/06/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: generate_automatic_stage1_params: listize - use busybox for the shell of stage2 - - * mdk-stage1/Makefile: defaults to not spawn shell - - * mdk-stage1/hack: kloug - - * Makefile, tools/i386/busybox, share/list.ppc, share/list, - share/list.alpha, share/aliases: use busybox for the shell of stage2 - -2001/06/21 Pixel <pixel@mandrakesoft.com> - - * docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/ - s/linux-mandrake/mandrakesoft/ - (hand made, no i18n messages done) - s/Linux-Mandrake/Mandrake Linux/ - s/linux-mandrake/mandrakesoft/ - (hand made, no i18n messages done) - - * genmodparm: remove duplicate, look in gi/tools - - * standalone/printerdrake, install2, docs/HACKING, tools/genmodparm, - mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README, - standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit, - mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm, - mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl, - bootloader.pm: s/Linux-Mandrake/Mandrake Linux/ - s/linux-mandrake/mandrakesoft/ - (hand made, no i18n messages done) - - * mdk-stage1/make_boot_img: remove GG sux - s/Linux-Mandrake/Mandrake Linux/ - s/linux-mandrake/mandrakesoft/ - (hand made, no i18n messages done) - -2001/06/11 dam's <damien@mandrakesoft.com> - - * proxy.pm: updated - typoCVS: - ---------------------------------------------------------------------- - proxy - - * my_gtk.pm: added gtkset_layout - - * standalone/drakproxy: corrected CVS: - ---------------------------------------------------------------------- - updated - perlised - - * interactive.pm: no icon if wizard - -2001/06/11 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator_consts.pm: added some bigger memory range. - - * Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when - modifying mga_dma = 0 - really fix the Matrox G200 PCI card acceleration using XF3, by disabling - DMA on - /etc/X11/glx.conf - added magic probe of resolution found, if the probed resolution seems - strange - according to memory available, it try to let the user select the right - resolution and depth. - - * install_steps.pm, printer.pm: applied patches given for printer - configuration bug reported by David Eastcott. - -2001/06/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: have PPP drivers in net_raw rather than in net - add PPP modules for 'net' drivers - - * rescue/tree/etc/rc.sysinit: minor changes - - * rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much - as possible before rebooting the rescue - - * mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c, - mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h, - mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c, - mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl - pppoe installation available - Initial revision - import initial ppp sources - - * mdk-stage1/dhcp.c: change location of error message when no reply - received - - * mdk-stage1/rp-pppoe/man/pppoe-relay.8, - mdk-stage1/rp-pppoe/configs/firewall-masq, - mdk-stage1/rp-pppoe/gui/html/props-nic.png, - mdk-stage1/rp-pppoe/src/pppoe-sniff.c, - mdk-stage1/rp-pppoe/configs/firewall-standalone, - mdk-stage1/rp-pppoe/gui/html/tkpppoe.html, - mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui, - mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8, - mdk-stage1/rp-pppoe/scripts/adsl-start.in, - mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go, - mdk-stage1/rp-pppoe/man/pppoe.8, - mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png, - mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in, - mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c, - mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c, - mdk-stage1/rp-pppoe/man/pppoe-server.8, - mdk-stage1/rp-pppoe/configs/pppoe.conf, - mdk-stage1/rp-pppoe/gui/html/props-advanced.png, - mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh, - mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure, - mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c, - mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c, - mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h, - mdk-stage1/rp-pppoe/scripts/adsl-init.in, - mdk-stage1/rp-pppoe/rp-pppoe.spec, - mdk-stage1/rp-pppoe/scripts/adsl-connect.in, - mdk-stage1/rp-pppoe/man/pppoe.conf.5, - mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in, - mdk-stage1/rp-pppoe/man/adsl-start.8, - mdk-stage1/rp-pppoe/gui/html/mainwin.png, - mdk-stage1/rp-pppoe/rp-pppoe-gui.spec, - mdk-stage1/rp-pppoe/gui/html/props-basic.png, - mdk-stage1/rp-pppoe/man/adsl-status.8, - mdk-stage1/rp-pppoe/configs/pppoe-server-options, - mdk-stage1/rp-pppoe/man/adsl-connect.8, - mdk-stage1/rp-pppoe/scripts/adsl-setup.in, - mdk-stage1/rp-pppoe/scripts/adsl-stop.in, - mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c, - mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c, - mdk-stage1/rp-pppoe/README, - mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png, - mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1, - mdk-stage1/rp-pppoe/scripts/adsl-status, - mdk-stage1/rp-pppoe/man/adsl-setup.8, - mdk-stage1/rp-pppoe/gui/html/props-options.png, - mdk-stage1/rp-pppoe/src/configure.in, - mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c, - mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in, - mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c, - mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision - import initial sources from rp-pppoe v3.0 - - * mdk-stage1/Makefile: change handling of .depend in Makefile - have adsl pppoe installation available - - * mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD - that will show us '**' for passwords - - * mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore, - mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore, - mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c, - mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile, - mdk-stage1/make_boot_img: have adsl pppoe installation available - - * detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to - autodetect raid arrays (still needs a kernel that implements the - ioctl..) - - * tools/Makefile: perl 5.6.1 now - - * mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from - my code anymore, expect the bootloader to set the parameter correctly - - * mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README, - mdk-stage1/ppp/solaris/Makefile.sol2, - mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down, - mdk-stage1/ppp/solaris/Makefile.sol2-64, - mdk-stage1/ppp/include/net/ppp_defs.h, - mdk-stage1/ppp/pppstats/Makefile.sunos4, - mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c, - mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h, - mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux, - mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c, - mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2, - mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h, - mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2, - mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc, - mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h, - mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c, - mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c, - mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c, - mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h, - mdk-stage1/ppp/svr4/ppp_comp_mod.c, - mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c, - mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer, - mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h, - mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h, - mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c, - mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets, - mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8, - mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2, - mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile, - mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4, - mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX, - mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c, - mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh, - mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c, - mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8, - mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h, - mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h, - mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c, - mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs, - mdk-stage1/ppp/pppd/sys-linux.c.wtmp, - mdk-stage1/ppp/include/linux/if_pppvar.h, - mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux, - mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam, - mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3, - mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c, - mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c, - mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile, - mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8, - mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h, - mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ, - mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c, - mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2, - mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh, - mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL, - mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c, - mdk-stage1/ppp/pppd/plugins/passprompt.c, - mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c, - mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback, - mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP, - mdk-stage1/ppp/pppd/Makefile.sol2, - mdk-stage1/ppp/pppd/plugins/minconn.c, - mdk-stage1/ppp/etc.ppp/options.options, - mdk-stage1/ppp/pppdump/Makefile.linux.makeopt, - mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem, - mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System, - mdk-stage1/ppp/etc.ppp/chap-secrets, - mdk-stage1/ppp/pppstats/Makefile.linux, - mdk-stage1/ppp/sample/pap-secrets, - mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8, - mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8, - mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on, - mdk-stage1/ppp/include/linux/ppp_defs.h, - mdk-stage1/ppp/scripts/chatchat/chatchat.c, - mdk-stage1/ppp/scripts/chatchat/README, - mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master, - mdk-stage1/ppp/svr4/Makedefs, - mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c, - mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h, - mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2, - mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc, - mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c, - mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux, - mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer, - mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux, - mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master, - mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h, - mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c, - mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h, - mdk-stage1/ppp/pppd/Makefile.linux.makeopt, - mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c, - mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh, - mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add, - mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h, - mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c, - mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf, - mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h, - mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top, - mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c, - mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c, - mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h, - mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top, - mdk-stage1/ppp/svr4/Makefile.svr4, - mdk-stage1/ppp/pppd/plugins/Makefile.linux, - mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision - import initial ppp sources - -2001/06/11 odin - - * standalone/drakproxy: first import of drakproxy - -2001/06/11 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): don't check /usr/bin/urpmi, better check - /usr/sbin/urpmi.update - - * commands.pm (grep_): add a missing semi-colon - - * share/compssUsers: remove NIS which is handled by DrakX (titi sucks) - -2001/06/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit, - rescue/Makefile: - - add 'guessmounts' that mimics RH's detecting of partitions when - rescue starts - -2001/06/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/az.po: updated Azeri file - - * share/po/ru.po, share/po/DrakX.pot: updated Russian file - -2001/06/10 Pixel <pixel@mandrakesoft.com> - - * rescue/guessmounts: pixelization (tested!) - - * install_any.pm (g_auto_install): more comments in auto_inst.cfg file - -2001/06/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/list.i386: rescuept is in /sbin now - - * share/list: rescuept in /sbin now - -2001/06/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: don't wait on upping lo interface - - * mdk-stage1/modules.c: fix minor bug detecting when modules are present - - * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c: - i need working random suite for ppp with dietlibc - - * mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two - stage1 processes! - -2001/06/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pl.po: updated Polish file - -2001/06/05 Pixel <pixel@mandrakesoft.com> - - * fs.pm (mount): notail in any case - - * tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst, - tools/i386/netboot/.cvsignore: menu.lst is now a local file created from - the example - - * share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1 - - * Makefile: fix - -2001/06/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, - share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file - -2001/06/01 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: use -FULL postfix for common .c files targetting - stage1-full - - * mdk-stage1/stage1.c: minor fix - - * mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs, - i want to link against glibc too - - * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c: - - - have strncat behave the same way as in glibc - - declare that we're using the DIETLIBC in include/stdlib.h, so I can - change my mind in "dns.c" to handle broken glibc which is not capable of - doing name resolution with a static binary - - * mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c, - mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c, - mdk-stage1/url.c, mdk-stage1/network.h: - - first draft of adsl support - - get back some code for supporting broken glibc unable to resolve - when linked statically - - * mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c, - mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c, - mdk-stage1/dietlibc/lib/tcsetattr.c, - mdk-stage1/dietlibc/include/termios.h, - mdk-stage1/dietlibc/include/netdb.h, - mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe - stuff compile better - -2001/05/31 daouda - - * bootlook.pm: add runlevel chooser feature - -2001/05/31 Pixel <pixel@mandrakesoft.com> - - * rescue/make_rescue_img: check presence of files from list and list.ARCH - - * Makefile (get_needed_files): exit with error message if files from - share/list (and - share/list.ARCH) are missing - - * install2.pm: hide step formatPartitions when upgrading - -2001/05/30 mbadaire - - * mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c, - mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common, - mdk-stage1/insmod-modutils/obj/Makefile, - mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile, - mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile, - mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile, - mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: - - allow build on ia64 - - have CFLAGS centralized in Makefile.common (should help ports such - as alpha) - - better looking sub makefiles - -2001/05/30 Pixel <pixel@mandrakesoft.com> - - * Makefile.drakxtools (install): ensure pm's in subdirs don't have - /use(diagnostics|vars|strict)/ - -2001/05/29 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: added fix from Michael Brown to handle pipe in queue - name for lpr. - -2001/05/29 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * share/compssUsers: add NIS client to network clients - -2001/05/29 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: added fix from Michael Brown to handle pipe in queue - name for lpr. - -2001/05/28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly - rewritten..) - -2001/05/25 Stew Benedict <sbenedict@mandrakesoft.com> - - * rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix - bootstrap creation, formatting sequence - - * install_steps_interactive.pm: fix bootstrap information screen back to - orig with missing ":" - PPC - add hfs support to rescue - PPC, fix bootstrap creation, formatting - sequence - -2001/05/25 siegel - - * share/po/de.po: updated time - moved to UTF-8 - -2001/05/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated Turkish file - -2001/05/24 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (g_auto_install): autoExitInstall set if not replay (was - the opposite) - -2001/05/23 Pixel <pixel@mandrakesoft.com> - - * rescue/list: add scd0... - -2001/05/22 siegel - - * share/po/de.po: updates - -2001/05/21 Stew Benedict <sbenedict@mandrakesoft.com> - - * tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation - of PPC boot CD on x86 platform - -2001/05/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: - - better detect when IP is not good - - error_msg when netmask seems invalid - - don't log too much `guessing netmask' - - * mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits - each - -2001/05/17 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed parted that ask for confirmation if partition - table is not right (MAXDATA - for example), this cause parted to ignore warning. - added blank space between partition windows and linux to help resolving - above case. - fixed hole in partitionning (need testing), use fdisk to get disk - geometry and - create partition that matches cylinder boundaries (no more - approximation). - make sure to create all partitions including /home. - -2001/05/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers - don't write nonsense code to separate frontend from stage1, - but rather, try to do some clever things - - * mdk-stage1/probing.c: unify user notification of network and scsi - devices that make load of drivers - don't write nonsense code to separate frontend from stage1, - but rather, try to do some clever things - - * mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h, - mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c, - mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c, - mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to - separate frontend from stage1, - but rather, try to do some clever things - - * mdk-stage1/frontend-common.c: plop - -2001/05/16 dam's <damien@mandrakesoft.com> - - * pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png, - pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png, - pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png, - pixmaps/bootdisk.png, pixmaps/services.png: added icons - - * standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot, - standalone/draksec, standalone/drakxservices, standalone/drakgw, - standalone/XFdrake, standalone/adduserdrake: added icon management - - * my_gtk.pm, interactive.pm: icons management - - * install2.pm: added icons management - - * standalone/draknet: added icon managment - - * pixmaps/printer.png: added icon - -2001/05/16 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: added support for /var creation, and more specific - package selection for server. - Include option support by VERSION file. - -2001/05/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h, - mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h, - mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README, - mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff - and code from stage1 - -2001/05/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po: - updated Turkish file - -2001/05/16 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile: fix yet again DrakX.pot making - - * partition_table.pm: re-add reiserfs as it should - add xfs - -2001/05/15 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be - usefull. - -2001/05/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: libresolv deprecated in GLIBC - have stage1-full with pcmcia also compile with dietlibc, cool! - - * mdk-stage1/network.c: fix guess netmask - configure_net_device is only used internally - - * mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling - interface (use of enum rather than guessing single numbers..) - - * mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines - - * mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile - with dietlibc, cool! - - build glibc and dietlibc targets - - bzero string buffer before sscanf call (dietlibc implementation) - - verify returns of ioperm so that I can use it in test mode - - * mdk-stage1/dietlibc/include/sys/file.h, - mdk-stage1/dietlibc/include/sys/io.h, - mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia - also compile with dietlibc, cool! - - * mdk-stage1/stage1.c: a bit of size reduction plus some language change - blurk - - * mdk-stage1/WHY-DIETLIBC: advocate dietlibc - - * mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author - - * mdk-stage1/disk.c: bzero string buffer before sscanf call, security for - dietlibc implementation - - * mdk-stage1/network.h: configure_net_device is only used internally - - * mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: - - build glibc and dietlibc targets - - bzero string buffer before sscanf call (dietlibc implementation) - - verify returns of ioperm so that I can use it in test mode - - * standalone/drakgw: full path for iptables - - * mdk-stage1/probing.c: allow wait_message calls to be multi-lines - nicer layout for PCI detection messages - better modules handling interface (use of enum rather than guessing - single numbers..) - -2001/05/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po, share/po/ar.po: Updated Turkish file - - * share/keyboards.tar.bz2: Added north-african keyboard - - * keyboard.pm: added arabic azerty keyboard - -2001/05/15 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile: fix messages to i18n extracting - -2001/05/14 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * fs.pm: s|mkxfs|mkfs.xfs|; - -2001/05/14 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/nfsmount.c: use new gethostby* interface - - * mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data - which provides the busybox - - * mdk-stage1/network.c: Have the wait_message() with the sleep() - - complies to gethostby functions - - add sleep(2) so that net intf is really up before operation - - more logs - - FTP: don't try to close control connection with data socket, erhm - :-( - - debug netmask guessing, with stdio-frontend - - * mdk-stage1/Makefile: i can compile slang and newt with dietlibc now - every targets build with dietlibc - - * mdk-stage1/make_boot_img: use busybox for my debugging purpose - - * mdk-stage1/tools.c: no need to poll() for data at beginning of - load_ramdisk_fd, it was a fix of another problem (bug with file stdio - operations with sockets in dietlibc) - - * mdk-stage1/dietlibc/Makefile: build this new dietlibc - import new version of dietlibc - - * mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions - provided by dietlibc - - * mdk-stage1/url.c: use poll() rather than select(), smaller code size - - * mdk-stage1/stage1.c: we don't use this sucking sash no more - we now use `busybox' compiled with the marvellous dietlibc, which - provides no less than 73 usefull binaries - - * mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c, - mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c, - mdk-stage1/dietlibc/include/sys/ipc.h, - mdk-stage1/dietlibc/alpha/sendmsg.S, - mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c, - mdk-stage1/dietlibc/sparc/__testandset.S, - mdk-stage1/dietlibc/syscalls.s/open.S, - mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h, - mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S, - mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h, - mdk-stage1/dietlibc/include/sys/syscall.h, - mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c, - mdk-stage1/dietlibc/syscalls.s/ptrace.s, - mdk-stage1/dietlibc/lib/isprint.c, - mdk-stage1/dietlibc/syscalls.s/dietstat.S, - mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c, - mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h, - mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c, - mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S, - mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c, - mdk-stage1/dietlibc/include/sys/sem.h, - mdk-stage1/dietlibc/syscalls.s/query_module.S, - mdk-stage1/dietlibc/lib/strchr.c, - mdk-stage1/dietlibc/syscalls.s/dietfstat64.S, - mdk-stage1/dietlibc/syscalls.s/lstat64.S, - mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c, - mdk-stage1/dietlibc/lib/perror.c, - mdk-stage1/dietlibc/include/sys/socket.h, - mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c, - mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c, - mdk-stage1/dietlibc/include/utmp.h, - mdk-stage1/dietlibc/syscalls.s/sendfile.S, - mdk-stage1/dietlibc/syscalls.s/nice.S, - mdk-stage1/dietlibc/syscalls.s/sigprocmask.S, - mdk-stage1/dietlibc/syscalls.s/select.S, - mdk-stage1/dietlibc/include/sys/mtio.h, - mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S, - mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S, - mdk-stage1/dietlibc/lib/__telldir.c, - mdk-stage1/dietlibc/i386/__testandset.S, - mdk-stage1/dietlibc/lib/remove.c, - mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S, - mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c, - mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c, - mdk-stage1/dietlibc/include/sys/un.h, - mdk-stage1/dietlibc/alpha/connect.S, - mdk-stage1/dietlibc/include/termios.h, - mdk-stage1/dietlibc/lib/sigfillset.c, - mdk-stage1/dietlibc/lib/sigismember.c, - mdk-stage1/dietlibc/syscalls.s/dietstat64.S, - mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c, - mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c, - mdk-stage1/dietlibc/lib/tcsetpgrp.c, - mdk-stage1/dietlibc/sparc/Makefile.add, - mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S, - mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c, - mdk-stage1/dietlibc/include/inttypes.h, - mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S, - mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c, - mdk-stage1/dietlibc/alpha/recvmsg.S, - mdk-stage1/dietlibc/syscalls.s/fork.S, - mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c, - mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S, - mdk-stage1/dietlibc/include/features.h, - mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c, - mdk-stage1/dietlibc/syscalls.s/writev.S, - mdk-stage1/dietlibc/lib/fputs.c, - mdk-stage1/dietlibc/alpha/sigprocmask.S, - mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h, - mdk-stage1/dietlibc/syscalls.s/nanosleep.S, - mdk-stage1/dietlibc/syscalls.s/creat.S, - mdk-stage1/dietlibc/include/sys/sysinfo.h, - mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S, - mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c, - mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c, - mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S, - mdk-stage1/dietlibc/include/dirent.h, - mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c, - mdk-stage1/dietlibc/include/net/route.h, - mdk-stage1/dietlibc/syscalls.s/exit.S, - mdk-stage1/dietlibc/include/pthread.h, - mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S, - mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c, - mdk-stage1/dietlibc/lib/execvp.c, - mdk-stage1/dietlibc/syscalls.s/__reboot.S, - mdk-stage1/dietlibc/lib/stdin.c, - mdk-stage1/dietlibc/syscalls.s/getitimer.S, - mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c, - mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S, - mdk-stage1/dietlibc/sparc/fork.S, - mdk-stage1/dietlibc/syscalls.s/__pread.S, - mdk-stage1/dietlibc/include/sys/poll.h, - mdk-stage1/dietlibc/syscalls.s/personality.S, - mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h, - mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h, - mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c, - mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c, - mdk-stage1/dietlibc/include/sys/param.h, - mdk-stage1/dietlibc/syscalls.s/__getpagesize.S, - mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S, - mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c, - mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h, - mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S, - mdk-stage1/dietlibc/include/sys/kd.h, - mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c, - mdk-stage1/dietlibc/syscalls.s/sched_yield.S, - mdk-stage1/dietlibc/include/sys/mman.h, - mdk-stage1/dietlibc/lib/__readdir.c, - mdk-stage1/dietlibc/lib/cfgetospeed.c, - mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c, - mdk-stage1/dietlibc/alpha/reml.S, - mdk-stage1/dietlibc/syscalls.s/fcntl.S, - mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c, - mdk-stage1/dietlibc/syscalls.s/ipc.S, - mdk-stage1/dietlibc/syscalls.s/mlockall.S, - mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c, - mdk-stage1/dietlibc/include/sys/msg.h, - mdk-stage1/dietlibc/syscalls.s/sigsuspend.S, - mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c, - mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h, - mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c, - mdk-stage1/dietlibc/include/net/if_arp.h, - mdk-stage1/dietlibc/lib/execlp.c, - mdk-stage1/dietlibc/syscalls.s/stat64.S, - mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h, - mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c, - mdk-stage1/dietlibc/syscalls.s/fstat64.S, - mdk-stage1/dietlibc/syscalls.s/sched_setparam.S, - mdk-stage1/dietlibc/include/sys/reboot.h, - mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c, - mdk-stage1/dietlibc/include/sys/sendfile.h, - mdk-stage1/dietlibc/include/sys/syslog.h, - mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c, - mdk-stage1/dietlibc/syscalls.s/sched_getparam.S, - mdk-stage1/dietlibc/lib/vsnprintf.c, - mdk-stage1/dietlibc/include/signal.h, - mdk-stage1/dietlibc/syscalls.s/pause.S, - mdk-stage1/dietlibc/include/arpa/inet.h, - mdk-stage1/dietlibc/include/sys/wait.h, - mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c, - mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c, - mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c, - mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c, - mdk-stage1/dietlibc/lib/__ltostr.c, - mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c, - mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S, - mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c, - mdk-stage1/dietlibc/lib/htons.c, - mdk-stage1/dietlibc/syscalls.s/sigaltstack.S, - mdk-stage1/dietlibc/include/sys/resource.h, - mdk-stage1/dietlibc/lib/__stat64_cvt.c, - mdk-stage1/dietlibc/lib/localtime.c, - mdk-stage1/dietlibc/alpha/seteuid.c, - mdk-stage1/dietlibc/syscalls.s/stime.S, - mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c, - mdk-stage1/dietlibc/ppc/Makefile.add, - mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c, - mdk-stage1/dietlibc/include/net/if.h, - mdk-stage1/dietlibc/include/shadow.h, - mdk-stage1/dietlibc/lib/__rewinddir.c, - mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c, - mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h, - mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c, - mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S, - mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c, - mdk-stage1/dietlibc/include/regex.h, - mdk-stage1/dietlibc/include/sys/ptrace.h, - mdk-stage1/dietlibc/lib/tcdrain.c, - mdk-stage1/dietlibc/syscalls.s/lstat.S, - mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c, - mdk-stage1/dietlibc/lib/random.c, - mdk-stage1/dietlibc/syscalls.s/times.S, - mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c, - mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S, - mdk-stage1/dietlibc/syscalls.s/dietlstat64.S, - mdk-stage1/dietlibc/ppc/__testandset.S, - mdk-stage1/dietlibc/include/mntent.h, - mdk-stage1/dietlibc/include/sys/file.h, - mdk-stage1/dietlibc/syscalls.s/fstat.S, - mdk-stage1/dietlibc/syscalls.s/llseek.S, - mdk-stage1/dietlibc/lib/strsep.c, - mdk-stage1/dietlibc/include/sys/stat.h, - mdk-stage1/dietlibc/syscalls.s/munlockall.S, - mdk-stage1/dietlibc/syscalls.s/setpriority.S, - mdk-stage1/dietlibc/include/assert.h, - mdk-stage1/dietlibc/include/strings.h, - mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c, - mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c, - mdk-stage1/dietlibc/ppc/__longjmp.S, - mdk-stage1/dietlibc/lib/__closedir.c, - mdk-stage1/dietlibc/include/sys/signal.h, - mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c, - mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore, - mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h, - mdk-stage1/dietlibc/lib/tm_conv.c, - mdk-stage1/dietlibc/syscalls.s/reboot.S, - mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S, - mdk-stage1/dietlibc/syscalls.s/umount2.S, - mdk-stage1/dietlibc/syscalls.s/readv.S, - mdk-stage1/dietlibc/lib/__fxstat.c, - mdk-stage1/dietlibc/include/sys/select.h, - mdk-stage1/dietlibc/syscalls.s/syslog.S, - mdk-stage1/dietlibc/syscalls.s/sysinfo.S, - mdk-stage1/dietlibc/lib/fprintf.c, - mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README, - mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c, - mdk-stage1/dietlibc/syscalls.s/getcwd.S, - mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c, - mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S, - mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S, - mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S, - mdk-stage1/dietlibc/lib/__opendir.c, - mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c, - mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c, - mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c, - mdk-stage1/dietlibc/lib/__getcwd.c, - mdk-stage1/dietlibc/include/netinet/in.h, - mdk-stage1/dietlibc/lib/shmctl.c, - mdk-stage1/dietlibc/syscalls.s/dietlstat.S, - mdk-stage1/dietlibc/include/arpa/nameser.h, - mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c, - mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c, - mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S, - mdk-stage1/dietlibc/lib/stderr.c, - mdk-stage1/dietlibc/syscalls.s/close.S, - mdk-stage1/dietlibc/syscalls.s/dietfstat.S, - mdk-stage1/dietlibc/include/locale.h, - mdk-stage1/dietlibc/syscalls.s/getpriority.S, - mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c, - mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c, - mdk-stage1/dietlibc/include/sys/mount.h, - mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S, - mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h, - mdk-stage1/dietlibc/lib/islower.c, - mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c, - mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c, - mdk-stage1/dietlibc/include/ctype.h, - mdk-stage1/dietlibc/include/netdb.h, - mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c, - mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c, - mdk-stage1/dietlibc/syscalls.s/waitpid.S, - mdk-stage1/dietlibc/lib/strtoul.c, - mdk-stage1/dietlibc/syscalls.s/stat.S, - mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc - - * mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers - - * mdk-stage1/dietlibc/include/stdio.h, - mdk-stage1/dietlibc/include/stdlib.h, - mdk-stage1/dietlibc/include/math.h, - mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile - with dietlibc - import new version of dietlibc - - * mdk-stage1/Makefile.common: new dietlibc binaries location - - * mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc - now - - * mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc - - * mdk-stage1/dhcp.c: Have the wait_message() with the sleep() - - add a sleep(2) after ioctl ifupping so that further operation can - work normally - - more logs - -2001/05/14 kjx - - * share/po/zh_CN.GB2312.po: process untranslated - -2001/05/14 Pixel <pixel@mandrakesoft.com> - - * fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling - -2001/05/11 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: fixed missing package which may be selected on - hardware during real install. - - * rescue/tree/etc/oem: added support to change boot entries when invoking - oem script. - fixed missing SCSI support and driver module loading. - fixed missing speficic packages not installed on HW detected. - -2001/05/08 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: VBox -> HBox in Embedded mode - - * standalone/mousedrake: code cleaned and debugged - added mouse test. Ugly - -2001/05/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stdio-frontend.c: fix minor stuff - re-include correct layout for [] choices, in a smaller way than before - - * mdk-stage1/tools.c: minor fix - needs to poll() for available data before loading ramdisk because ftp - transfers would fail in some situations - - * mdk-stage1/init.c: new maxim - - * mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star - is printed when last blocks of file are read - - * mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS: - ---------------------------------------------------------------------- - -2001/05/08 siegel - - * share/po/de.po: fixed plenty ugly typos - -2001/05/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt_BR.po: updated Brazilian file - -2001/05/07 yduret - - * docs/README.devel: fix one typo - - * any.pm, bootloader.pm: updated install_lilo() according to new lilo - package - (/boot/lilo-{menu,graphic,text}) - -2001/05/06 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad output and bad adsl script - -2001/05/06 Stew Benedict <sbenedict@mandrakesoft.com> - - * install2.pm: workaround for msec hang on PPC - -2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: KDE+SOUND -> 4 xmms-arts - -2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * mdk-stage1/mar/mar-extract-only.c: text size micro-opt - -2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: KDE+SOUND -> 4 xmms-arts - -2001/05/04 Stew Benedict <sbenedict@mandrakesoft.com> - - * c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC, - don't run xmodmap, PPC SMP routine placeholder - -2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com> - - * mdk-stage1/mar/mar-extract-only.c: text size micro-opt - -2001/04/30 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stdio-frontend.c: nicer layout for progressbar and - statusreport, when update_progression - Provide some description of the drivers - - * docs/HACKING: fix - pserver -> ext - - * mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h, - mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h, - mdk-stage1/modules.c: Provide some description of the drivers - -2001/04/30 Pixel <pixel@mandrakesoft.com> - - * docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/ - - * docs/advocacy: fuck'em all - -2001/04/26 François Pons <fpons@mandrakesoft.com> - - * docs/README.devel, docs/README: added some more comments for DrakX code - source and usage. - -2001/04/25 François Pons <fpons@mandrakesoft.com> - - * tools/oem-prepare: fixed use of VERSION file to find language. - prepare a oem disk to be used by moving all files that will not be - installed by oem (oem-master disk preparation). - - * rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed - usage of free space on disk, added NVIDIA packages to install. - - * rescue/tree/etc/oem-server: added missing VERSION file. - fixed usage of free space on disk, added NVIDIA packages to install. - - * rescue/tree/etc/oem: added missing autologin package. - added option to enable oem mode. - added missing VERSION file. - fixed usage of free space on disk, added NVIDIA packages to install. - -2001/04/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: version is labelled "cooker" - -2001/04/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c: - integrate fg's fixes for includes - -2001/04/19 Stew Benedict <sbenedict@mandrakesoft.com> - - * rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha, - rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc - -2001/04/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: fix bug that trashes the network config of stage1 - during stage2, when no DNS is provided - -2001/04/18 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: last corrections - - * standalone/draknet, netconnect.pm: last corrections - corrected internet connection test, and parameters editing - - * install_steps_gtk.pm: corrected cursor on details - -2001/04/18 Frederic Lepied <flepied@mandrakesoft.com> - - * share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE - * drakprofile in level 1 - * swapped tkinter and python-devel - * vnc-server in NETWORKING_REMOTE_ACCESS_SERVER - * vnc-SVGALIB in level 2 - -2001/04/17 dam's <damien@mandrakesoft.com> - - * standalone/mousedrake: fixed embedded - - * bootlook.pm: chmoded autologin - -2001/04/17 François Pons <fpons@mandrakesoft.com> - - * any.pm: restored grub as everything seems fine. - - * rescue/tree/etc/oem-server: fixed swap size instead of inst size for - swap gap. - make sure kernel will be selected. - - * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. - make sure kernel is selected. - - * install_steps_interactive.pm: fixed missing mouse update in summary. - -2001/04/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV - -2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * standalone/draknet: fixed typo - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: Updated Basque file - -2001/04/17 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setRootPassword): better ensure - 'broadcast' insteaf of overriding - (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still - means no NIS - - * any.pm (setupBootloader): remove a warning - -2001/04/17 warly - - * share/rpmsrate: put MAKEDEV at end of line - -2001/04/17 dam's <damien@mandrakesoft.com> - - * standalone/mousedrake: fixed embedded - - * bootlook.pm: chmoded autologin - -2001/04/17 François Pons <fpons@mandrakesoft.com> - - * any.pm: restored grub as everything seems fine. - - * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. - make sure kernel is selected. - fixed parted problem. - - * rescue/tree/etc/oem-server: fixed swap size instead of inst size for - swap gap. - make sure kernel will be selected. - - * install_steps_interactive.pm: fixed missing mouse update in summary. - -2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: Updated Basque file - -2001/04/17 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setRootPassword): better ensure - 'broadcast' insteaf of overriding - (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still - means no NIS - - * any.pm (setupBootloader): remove a warning - -2001/04/17 dam's <damien@mandrakesoft.com> - - * bootlook.pm: chmoded autologin - -2001/04/17 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. - make sure kernel is selected. - fixed parted problem. - - * rescue/tree/etc/oem-server: fixed swap size instead of inst size for - swap gap. - make sure kernel will be selected. - -2001/04/17 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setRootPassword): better ensure - 'broadcast' insteaf of overriding - (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still - means no NIS - - * any.pm (setupBootloader): remove a warning - -2001/04/17 dam's <damien@mandrakesoft.com> - - * bootlook.pm: chmoded autologin - -2001/04/17 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. - make sure kernel is selected. - fixed parted problem. - - * rescue/tree/etc/oem-server: fixed swap size instead of inst size for - swap gap. - make sure kernel will be selected. - -2001/04/17 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setRootPassword): set NIS to broadcast - when NIS asked. Empty NIS still means no NIS - - * any.pm (setupBootloader): remove a warning - -2001/04/16 dam's <damien@mandrakesoft.com> - - * any.pm: removed Grub if Embedded - -2001/04/16 dam's <damien@mandrakesoft.com> - - * netconnect.pm: minor bug. - - * any.pm: removed Grub if Embedded - -2001/04/16 dam's <damien@mandrakesoft.com> - - * standalone/net_monitor: updated - updated - - * network.pm: dhcpd -> dhcpcd - - * Xconfigurator.pm: added nice monitor.png - - * netconnect.pm: minor bug. - dhcpd -> dhcpcd - - * standalone/draknet: updated - - * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, - pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, - pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, - pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, - pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, - pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, - pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop - removed for readd in kb - - * my_gtk.pm: corrected typo - added grey fix for contreol-center - -2001/04/16 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: added missing rio500 in closure. - finally fixed menu by generating /etc/rpm/macros file. - added missing LF. - now fixed menu problems. - try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of - fr:fr_FR. - really disable server. - maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french). - fixed to avoid nasty message in wrong places. - moved warning message around. - fixed wrong LOCALES"...". - fixed lang weirdness, fixed minimal size of / partition to be more - confortable, - fixed default language for starting DrakX after. - - * Xconfig.pm: fixed standalone error for wacom weirdness. - fixed HASH() in /etc/X11/XF86Config*. - - * fs.pm: restored not neccessary to load reiserfs for formating. - loading reiserfs module before formatting. - -2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, - pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for - XFdrake - - * mdk-stage1/TECH-INFOS: update doc - - * share/po/fr.po: fix minor thing - -2001/04/16 Pixel <pixel@mandrakesoft.com> - - * share/compssUsers: remove BURNER from Utilities - -2001/04/16 warly - - * share/rpmsrate: lower portsentry - -2001/04/16 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: added nice monitor.png - - * standalone/net_monitor: updated - - * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, - pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, - pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, - pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, - pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, - pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, - pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop - removed for readd in kb - - * my_gtk.pm: corrected typo - added grey fix for contreol-center - -2001/04/16 François Pons <fpons@mandrakesoft.com> - - * Xconfig.pm: fixed standalone error for wacom weirdness. - fixed HASH() in /etc/X11/XF86Config*. - - * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to - "fr:fr_FR" for french). - fixed to avoid nasty message in wrong places. - moved warning message around. - fixed wrong LOCALES"...". - fixed lang weirdness, fixed minimal size of / partition to be more - confortable, - fixed default language for starting DrakX after. - -2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, - pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for - XFdrake - -2001/04/16 Pixel <pixel@mandrakesoft.com> - - * share/compssUsers: remove BURNER from Utilities - -2001/04/16 warly - - * share/rpmsrate: lower portsentry - -2001/04/16 dam's <damien@mandrakesoft.com> - - * standalone/draknet: bugfix - added update thread - corrected bad install package. - updated expert mode - - * network.pm, install_steps.pm: corrected bad install package. - - * Xconfigurator.pm: added nice monitor.png - - * tinyfirewall.pm: corrected package installation - - * standalone/net_monitor: updated - - * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, - pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, - pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, - pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, - pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, - pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, - pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop - removed for readd in kb - - * my_gtk.pm: corrected typo - added grey fix for contreol-center - - * netconnect.pm: debug - corrected bad install package. - -2001/04/16 François Pons <fpons@mandrakesoft.com> - - * Xconfig.pm: fixed standalone error for wacom weirdness. - fixed HASH() in /etc/X11/XF86Config*. - - * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to - "fr:fr_FR" for french). - fixed to avoid nasty message in wrong places. - moved warning message around. - fixed wrong LOCALES"...". - fixed lang weirdness, fixed minimal size of / partition to be more - confortable, - fixed default language for starting DrakX after. - -2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, - pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for - XFdrake - -2001/04/16 Pixel <pixel@mandrakesoft.com> - - * share/compssUsers: remove BURNER from Utilities - - * install_any.pm (g_auto_install): do not take 'mkbootdisk' - -2001/04/16 warly - - * share/rpmsrate: lower portsentry - -2001/04/15 fabman - - * share/po/es.po: updates - -2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fix minor typo - -2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/gl.po: updated Galician file - -2001/04/15 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (reallyChooseGroups): translate path (eg: - Workstation, Server) to make gg happy - -2001/04/15 fabman - - * share/po/es.po: updates - -2001/04/15 fcrozat - - * share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories - -2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fix minor typo - -2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files - -2001/04/15 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (reallyChooseGroups): translate path (eg: - Workstation, Server) to make gg happy - - * printerdrake.pm (main): restore the "Ok" button for the queues - manipulation - - * any.pm (write_passwd_user): fix use of local - - * interactive.pm (ask_from_entries_refH_powered_normalize): add an eval - around "require log" to keep perl from going totally mad (getting things - like v18.843.482 required--this is only v5.6.0) - -2001/04/15 yduret - - * bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to - mcc normally - fix layout & size - -2001/04/14 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected isdn detect display - - * standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7 - -2001/04/14 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate - selection of packages. - - * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. - -2001/04/14 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (naughtyServers): add apache - - * install_gtk.pm (createXconf): ensure the mouse device is created (mainly - for auto_inst) - - * install_steps_interactive.pm (exitInstall): fix bad i18n of Replay - button (thx2submarine) - -2001/04/14 warly - - * share/rpmsrate: lower viavoicemenu to 1 to avoid error message for - powerpack boxes without ViaVoice - -2001/04/14 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate - selection of packages. - - * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. - -2001/04/14 Pixel <pixel@mandrakesoft.com> - - * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's - test) - - * Xconfigurator.pm (use vars): fix stew sux - (testFinalConfig): nicer stderr handling - - * interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code - -2001/04/14 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed to gzip synthesis file. - safe guard generation of synthesis file. - fixed umask on urpmi list file and generate synthesis file for each - hdlist. - - * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. - -2001/04/14 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (configureX): fix link /etc/gtk (to - /mnt/etc/gtk) instead of /etc/gtkrc - - * any.pm (autologin): spurious messages of chksession -> dave nul - - * interactive_newt.pm (exit): fix the exit code - (wait_message_endW): don't log "none stacked wait-messages" (as a lot of - them exist...) - (waitbox): remove spurious '0' in wait_messages - - * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's - test) - - * Xconfigurator.pm (use vars): fix stew sux - (testFinalConfig): nicer stderr handling - - * interactive_gtk.pm (exit): fix the exit code - -2001/04/14 warly - - * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser - and list - -2001/04/14 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed to gzip synthesis file. - safe guard generation of synthesis file. - fixed umask on urpmi list file and generate synthesis file for each - hdlist. - -2001/04/14 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (configureX): fix link /etc/gtk (to - /mnt/etc/gtk) instead of /etc/gtkrc - - * any.pm (autologin): spurious messages of chksession -> dave nul - - * interactive_newt.pm (exit): fix the exit code - (wait_message_endW): don't log "none stacked wait-messages" (as a lot of - them exist...) - (waitbox): remove spurious '0' in wait_messages - - * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's - test) - - * Xconfigurator.pm (use vars): fix stew sux - (testFinalConfig): nicer stderr handling - - * interactive_gtk.pm (exit): fix the exit code - -2001/04/14 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse - setup for PPC - -2001/04/14 warly - - * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser - and list - -2001/04/13 dam's <damien@mandrakesoft.com> - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * Xconfigurator.pm: corrected - updated - updated message - - * standalone/draknet: message corrected - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still - opened). - -2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: Updated Norwegian file - Updated po files - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, - share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: Updated po files - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (main): reverse message - - * install_steps_gtk.pm (installPackages): hide Details button sooner - (installPackages): do not show button "Details" when no advertising - - * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for - ru(winkeys), it is redondant - - * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250 - - * any.pm (ask_users): do not have an empty icon. better not ask for icon - if no icon - -2001/04/13 siegel - - * share/po/de.po: updates - -2001/04/13 dam's <damien@mandrakesoft.com> - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * Xconfigurator.pm: corrected - updated - updated message - - * standalone/draknet: message corrected - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still - opened). - - * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is - available. - fixed very old typo not encountered before; - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (main): reverse message - - * install_steps_gtk.pm (installPackages): hide Details button sooner - (installPackages): do not show button "Details" when no advertising - - * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for - ru(winkeys), it is redondant - - * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250 - - * any.pm (ask_users): do not have an empty icon. better not ask for icon - if no icon - -2001/04/13 warly - - * share/compssUsers: add ssh server in Network Computer Server - -2001/04/13 dam's <damien@mandrakesoft.com> - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * Xconfigurator.pm: corrected - updated - updated message - - * standalone/draknet: message corrected - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is - available. - fixed very old typo not encountered before; - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * common.pm (backtrace): created - - * install_steps_interactive.pm (addUser): remove the setting of - $o->{autologin}, now done in any::autologin - - * install_steps_gtk.pm (installPackages): hide Details button sooner - (installPackages): do not show button "Details" when no advertising - - * install2.pm (miscellaneous): add setting KEYBOARD=yes in - /etc/sysconfig/usb as asked by Lord Chmou - - * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty - list instead of dying (for 8.0 only, should be switched back to die) - (ask_from_listf): display the backtrace when empty list - - * any.pm (ask_users): add the empty icon - (autologin): fix - -2001/04/13 warly - - * share/compssUsers: add ssh server in Network Computer Server - -2001/04/13 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: updated - updated message - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * standalone/draknet: message corrected - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is - available. - fixed very old typo not encountered before; - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * common.pm (backtrace): created - - * install_steps_interactive.pm (addUser): remove the setting of - $o->{autologin}, now done in any::autologin - - * install2.pm (miscellaneous): add setting KEYBOARD=yes in - /etc/sysconfig/usb as asked by Lord Chmou - - * install_steps_gtk.pm (installPackages): do not show button "Details" - when no advertising - - * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty - list instead of dying (for 8.0 only, should be switched back to die) - (ask_from_listf): display the backtrace when empty list - - * any.pm (ask_users): add the empty icon - (autologin): fix - -2001/04/13 warly - - * share/compssUsers: add ssh server in Network Computer Server - -2001/04/13 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: updated - updated message - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * standalone/draknet: message corrected - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is - available. - fixed very old typo not encountered before; - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * common.pm (backtrace): created - - * install_steps_interactive.pm (addUser): remove the setting of - $o->{autologin}, now done in any::autologin - - * install2.pm (miscellaneous): add setting KEYBOARD=yes in - /etc/sysconfig/usb as asked by Lord Chmou - - * install_steps_gtk.pm (installPackages): do not show button "Details" - when no advertising - - * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty - list instead of dying (for 8.0 only, should be switched back to die) - (ask_from_listf): display the backtrace when empty list - - * any.pm (ask_users): add the empty icon - (autologin): fix - -2001/04/13 warly - - * share/compssUsers: add ssh server in Network Computer Server - -2001/04/13 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: updated - updated message - - * standalone/draknet: message corrected - updated - - * netconnect.pm: net_cnx_up/down xritten in neuneu - - * bootlook.pm: embedded = 0 -> local - -2001/04/13 fabman - - * share/po/es.po: synchro with EN - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is - available. - fixed very old typo not encountered before; - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * common.pm (backtrace): created - - * install_steps_interactive.pm (addUser): remove the setting of - $o->{autologin}, now done in any::autologin - - * install2.pm (miscellaneous): add setting KEYBOARD=yes in - /etc/sysconfig/usb as asked by Lord Chmou - - * install_steps_gtk.pm (installPackages): do not show button "Details" - when no advertising - - * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty - list instead of dying (for 8.0 only, should be switched back to die) - (ask_from_listf): display the backtrace when empty list - - * any.pm (ask_users): add the empty icon - (autologin): fix - -2001/04/13 warly - - * share/compssUsers: add ssh server in Network Computer Server - add DATABASES to Database - add icons for server - -2001/04/13 dam's <damien@mandrakesoft.com> - - * network.pm: updated wireless configuration - - * netconnect.pm: corrected loop in isdn + other things - - * bootlook.pm: embedded = 0 -> local - - * standalone/draknet: updated - added delete event - -2001/04/13 François Pons <fpons@mandrakesoft.com> - - * netconnect.pm: fixed syntax error :-) - - * install_steps.pm, install_steps_gtk.pm: added conditional update-menus - if package are installed. - - * install_steps_interactive.pm: added conditional update-menus if package - are installed. - make sure update-menus is called after installing cups related packages. - -2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated - Croatian and Swedish files - - * share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po, - share/po/is.po, share/po/cs.po: Removed po files with too low leve lof - translating ( < 60% ) - so they are not included on final CD - -2001/04/13 Pixel <pixel@mandrakesoft.com> - - * common.pm (backtrace): created - - * install_steps_interactive.pm (addUser): remove the setting of - $o->{autologin}, now done in any::autologin - - * bootlook.pm: don't use Locale::GetText, use DrakX's i18n - - * install2.pm (miscellaneous): add setting KEYBOARD=yes in - /etc/sysconfig/usb as asked by Lord Chmou - - * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty - list instead of dying (for 8.0 only, should be switched back to die) - (ask_from_listf): display the backtrace when empty list - - * my_gtk.pm (new): make dams happy - - * any.pm (ask_users): add the empty icon - (autologin): fix - -2001/04/13 warly - - * share/compssUsers: add DATABASES to Database - add icons for server - -2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c: remove unnecessary redhat history code - -2001/04/12 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed wrong kernel version extraction (typically for - upgrade). - - * install_steps_interactive.pm: removed Cancel of Summary. - fixed ask printer configuration. - - * detect_devices.pm: fix Hewlett-Packard to HP in case. - - * standalone/printerdrake: never ask to configure a printer in standalone. - - * printerdrake.pm: automatically add a queue if nothing exists. - fixed ask to configure a printer. - - * interactive.pm: removed strict die on empty list. - - * live_install2: added some gtk and gdk_imlib missing variables. - - * live_install: removed gtk variable for data, moved to second script. - - * modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of - packdrake. - -2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c: remove unneeded #define - - * standalone/drakgw: add some rule so later on tinyfirewall will not - prevent everything from working - - * share/po/fr.po: minor fix - write some ppc translations - -2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/it.po: Updated Italian file - -2001/04/12 Pixel <pixel@mandrakesoft.com> - - * printer.pm: use run_program and remove "require run_program"s - - * my_gtk.pm (main): only accept X (gdk) events key_press, key_release and - exposure (so - that not to receive motion_notify which would generate focus_out in - non-interesting cases) - - * interactive.pm (ask_from_entries_refH_powered_normalize): fix the test - for empty lists - (ask_from_entries_refH_powered_normalize): - - when not_edit and empty list, die. - - when not_edit and single element list, don't display that entry. - - * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" - - * modules.pm (configure_pcmcia): better handling for not running cardmgr - many times - (configure_pcmcia): always run cardmgr so that it is run even if stage1 - did create a /var/run/stab. This is just a try :-/ - -2001/04/12 dam's <damien@mandrakesoft.com> - - * netconnect.pm: if neuneu but explicited clicked, don't skip - corrected pcmcia driver - -2001/04/12 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: removed Cancel of Summary. - fixed ask printer configuration. - - * common.pm: improved bestMatchSentence2. - - * detect_devices.pm: fix Hewlett-Packard to HP in case. - - * standalone/printerdrake: never ask to configure a printer in standalone. - - * printerdrake.pm: automatically add a queue if nothing exists. - fixed ask to configure a printer. - - * interactive.pm: removed strict die on empty list. - - * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of - packdrake. - -2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: add some rule so later on tinyfirewall will not - prevent everything from working - - * share/po/fr.po: write some ppc translations - un-dadouize a problem - -2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/it.po: Updated Italian file - -2001/04/12 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): fix no advertising with less - than 20MB of packages - - * interactive.pm (ask_from_entries_refH_powered_normalize): - - when not_edit and empty list, die. - - when not_edit and single element list, don't display that entry. - - * install_steps_interactive.pm (configureX): fix for X test at install - with exotic fonts - - * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" - - * modules.pm (configure_pcmcia): better handling for not running cardmgr - many times - (configure_pcmcia): always run cardmgr so that it is run even if stage1 - did create a /var/run/stab. This is just a try :-/ - -2001/04/12 dam's <damien@mandrakesoft.com> - - * bootlook.pm: corrected typo - added use bootloader - - * standalone/net_monitor: typo - - * netconnect.pm: if neuneu but explicited clicked, don't skip - corrected pcmcia driver - corrected typo - - * lang.pm: pixel sux - - * network.pm, standalone/draknet: corrected network connection - - * my_gtk.pm: corrected set_modal - -2001/04/12 fabman - - * share/po/es.po: updated spanish .po files - -2001/04/12 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: removed Cancel of Summary. - fixed ask printer configuration. - - * common.pm: improved bestMatchSentence2. - - * detect_devices.pm: fix Hewlett-Packard to HP in case. - - * standalone/printerdrake: never ask to configure a printer in standalone. - - * printerdrake.pm: automatically add a queue if nothing exists. - fixed ask to configure a printer. - - * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of - packdrake. - -2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: un-dadouize a problem - sync - -2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot, - share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po, - share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po, - share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, - share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po, - share/po/id.po: Updated Chinese file - - * share/po/it.po: Updated Italian file - Updated Chinese file - -2001/04/12 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): fix no advertising with less - than 20MB of packages - - * interactive.pm (ask_from_entries_refH_powered_normalize): - - when not_edit and empty list, die. - - when not_edit and single element list, don't display that entry. - - * install_steps_interactive.pm (configureX): fix for X test at install - with exotic fonts - - * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" - - * modules.pm (configure_pcmcia): better handling for not running cardmgr - many times - (configure_pcmcia): always run cardmgr so that it is run even if stage1 - did create a /var/run/stab. This is just a try :-/ - -2001/04/12 siegel - - * share/po/de.po: new german version - -2001/04/12 yduret - - * bootlook.pm: added some stuff - -2001/04/11 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: no setmodal 0 if wizard - -2001/04/12 dam's <damien@mandrakesoft.com> - - * bootlook.pm: corrected typo - added use bootloader - - * netconnect.pm: corrected typo - -2001/04/12 fabman - - * share/po/es.po: updated spanish .po files - -2001/04/12 siegel - - * share/po/de.po: new german version - -2001/04/11 dam's <damien@mandrakesoft.com> - - * share/themes-mdk.rc: tooltips - - * netconnect.pm: updated - - * my_gtk.pm: no setmodal 0 if wizard - -2001/04/11 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (reallyChooseGroups): relook - - * install_steps_interactive.pm (chooseGroups): warn if chosen size is too - big - - * share/compssUsers: adapt for new profile choosing layout - -2001/04/11 yduret - - * bootlook.pm: bug fix in autologin - -2001/04/11 dam's <damien@mandrakesoft.com> - - * share/themes-mdk.rc: tooltips - - * bootlook.pm: updated - corrected - - * tinyfirewall.pm: installation of package : not at the same place - - * netconnect.pm: updated - added driver for pcmcia, corrected eth conf for pppoe - -2001/04/11 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: added missing LD_LOADER for calling rpm. - - * printerdrake.pm: fixed probe on kernel 2.4. - make printer devices more accurate. - removed limitation to only one port probed - - * pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on - upgrade. - - * detect_devices.pm: avoid need of shell for live upgrade on serial_probe - (removed 2>/dev/null which - is not necessary). - fixed printer probe (usb and parallel). - - * mouse.pm: fix wacom usb tablet - - * standalone/printerdrake: added missing take into account of - /etc/modules.conf - - * lang.pm: added missing LD_LOADER reference and remove old code - commented. - -2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: unfuzzyize - sync with new msg in services.pm and compssUsers - sync with pablo update - fixes of translations - write the shitload of untranslated and fuzzy msg - - * standalone/tinyfirewall: i18n title - - * services.pm: have many more services tooltipped from here so we can get - translations afterwards - - * share/compssUsers: fix typos of rpmsrate groups - - * standalone/drakgw: kosmetik - do i18n for title also - -2001/04/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/rpmsrate: Added reference to netscape-chinese_big5 file - - * share/po/DrakX.pot, share/po/wa.po: Updated Walloon file - Updated po files - Updated Slovak, Walloon and Polish files - - * share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, - share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po, - share/po/ca.po, share/po/cs.po: Updated po files - Updated Slovak, Walloon and Polish files - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po, - share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po, - share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/af.po: Updated po files - -2001/04/11 Pixel <pixel@mandrakesoft.com> - - * run_program.pm (rooted): don't call install_any::check_prog if rooted - - * standalone/drakboot: make it work (why was bootloader::install - commented?) - - * share/compssUsers: adapt for new profile choosing layout - - * Makefile: take cardmgr-* - - * install_steps_interactive.pm (chooseGroups): warn if chosen size is too - big - translate the ``path'' in profile selection - - * share/po/i18n_compssUsers: relooking - - * any.pm (setupBootloader): translate the bootloaders to use - (setupBootloader): nicer look&feel - - * install_any.pm (fsck_option): add a closing ``"'' so that strings to - i18n extraction works - (fsck_option): add a closing ``"'' so that strings to i18n extraction - works - (check_prog): make it work - - * install_steps_gtk.pm (reallyChooseGroups): relook - (installPackages): pressing "Details" gives you more detailed info - (reallyChooseGroups): start relooking - (installPackages): don't display advertising if less 20MB of packages - translate the ``path'' in profile selection - -2001/04/11 warly - - * share/compssUsers: Add descr for servers - -2001/04/11 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: make printer devices more accurate. - removed limitation to only one port probed - - * mouse.pm: fix wacom usb tablet - - * standalone/printerdrake: added missing take into account of - /etc/modules.conf - - * detect_devices.pm: fixed printer probe (usb and parallel). - -2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * services.pm: have many more services tooltipped from here so we can get - translations afterwards - - * share/po/fr.po: write the shitload of untranslated and fuzzy msg - - * share/compssUsers: fix typos of rpmsrate groups - -2001/04/11 Pixel <pixel@mandrakesoft.com> - - * run_program.pm (rooted): don't call install_any::check_prog if rooted - - * diskdrake.pm (More): fix exception relaunching - - * install_any.pm (check_prog): make it work - - * any.pm (setupBootloader): nicer look&feel - - * standalone/drakboot: make it work (why was bootloader::install - commented?) - - * Makefile: take cardmgr-* - -2001/04/11 fabman - - * share/po/es.po: updated spanish .po file - -2001/04/11 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: make printer devices more accurate. - removed limitation to only one port probed - - * mouse.pm: fix wacom usb tablet - - * standalone/printerdrake: added missing take into account of - /etc/modules.conf - - * detect_devices.pm: fixed printer probe (usb and parallel). - -2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: write the shitload of untranslated and fuzzy msg - -2001/04/11 Pixel <pixel@mandrakesoft.com> - - * tools/make_mdkinst_stage2: to lighten mdkinst_stage2: - - completly remove po's (will be getFile'd) - - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd) - - * standalone/drakboot: make it work (why was bootloader::install - commented?) - - * share/aliases: add rmmod -> insmod_ - - * lang.pm (get_x_fontset): special cases for some big (size) fonts - - * Makefile: take cardmgr-* - - * install_any.pm (check_prog): make it work - (check_prog): if a prog isn't available, try to fetch it via getFile - (remove_bigseldom_used): created, purpose: remove unneeded stuff on - stage2 - to allow a getAndSaveFile. - (getAndSaveFile): if only one arg is given, assume the name is the same - - * standalone/XFdrake: fix bug for running xfs - - * any.pm (setupBootloader): nicer look&feel - - * diskdrake.pm (More): fix exception relaunching - check resize_reiserfs is there or get it - - * run_program.pm (rooted): don't call install_any::check_prog if rooted - in install, call install_any::check_prog to allow shadow progs which are - fetched when needed via getFile - - * share/list: remove rmmod (is now a symlink) - -2001/04/11 siegel - - * share/po/de.po: updated german version - -2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ca.po: Updated Catalan file - -2001/04/10 Pixel <pixel@mandrakesoft.com> - - * Makefile: - - fix wiz_*.png removing - - fix copying cardmgr* which included cardmgr.o - -2001/04/11 Pixel <pixel@mandrakesoft.com> - - * tools/make_mdkinst_stage2: to lighten mdkinst_stage2: - - completly remove po's (will be getFile'd) - - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd) - - * standalone/XFdrake: fix bug for running xfs - - * diskdrake.pm: check resize_reiserfs is there or get it - - * share/aliases: add rmmod -> insmod_ - - * install_any.pm (check_prog): if a prog isn't available, try to fetch it - via getFile - (remove_bigseldom_used): created, purpose: remove unneeded stuff on - stage2 - to allow a getAndSaveFile. - (getAndSaveFile): if only one arg is given, assume the name is the same - - * share/list: remove rmmod (is now a symlink) - - * run_program.pm: in install, call install_any::check_prog to allow shadow - progs which are - fetched when needed via getFile - - * lang.pm (get_x_fontset): special cases for some big (size) fonts - -2001/04/10 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad network restart - - * my_gtk.pm: corrected bad font - - * network.pm: get rid of ifcfg- - minor correction - -2001/04/10 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: fixed selection of CDs. - - * devices.pm: added input/event class of devices (necessary for usb wacom - at install) - -2001/04/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, - mdk-stage1/mkinitrd_helper/Makefile: - - honour quiet mode at boot time - - fake modprobe to shut up kmod - - * bootlook.pm: do not use french in i18n'ed msg yvounet!! - - * standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth - interoperation with bastille-firewall - -2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po: Updated Czech file - Updated po files - - * share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated - Indonesian, Japanese, Korean and Vietnamese files - Updated po files - - * share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing - translatable string - Updated po files - - * share/po/ca.po: Updated Catalan file - Updated po files - - * share/locales.tar.bz2: Added missing file for Vietnamese - - * share/po/bg.po: Updated Bulgarian file - Updated po files - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, - share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po, - share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, - share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, - share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files - -2001/04/10 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq - '') - (create_boxradio): handle double_click - (ask_from_entries_refW): use radio boxes instead of list/clist if small - number - of choices - (create_ctree): handle single click on node opens the node - - * my_gtk.pm: create and use gtkset_tip - (_create_window): XSetInputFocus done only on expose_event of the - topmost window - (new): ensure only one modal - - * Xconfigurator.pm (main): have an "Ok" button to leave - - * install_steps_gtk.pm: use gtkset_tip - (choosePackagesTree): fix "Show automatically selected packages" - create and use gtkset_tip - - * Makefile: - - fix wiz_*.png removing - - fix copying cardmgr* which included cardmgr.o - -2001/04/10 warly - - * share/rpmsrate: add viavoicemenu_{us,gr,fe} - -2001/04/10 yduret - - * bootlook.pm: grub/lilo mode - -2001/04/10 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad network restart - - * my_gtk.pm: corrected bad font - - * network.pm: get rid of ifcfg- - minor correction - -2001/04/09 dam's <damien@mandrakesoft.com> - - * tinyfirewall.pm: typo - -2001/04/09 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs - size as the check is done before rounding. - - * bootloader.pm (install_grub): altconfigfile only if /boot is not - reiserfs :-/ - - * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many - modules.cz) - - * install_any.pm (setPackages): also have SOUND set in compssUsersChoice - based on pciusbtable - - * share/compssUsers, share/rpmsrate: - - SOUND is now a flag - - AUDIO is the group - -2001/04/09 siegel - - * tinyfirewall.pm: i18n fixes - -2001/04/09 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixes of grub installation using hd.img - fix the fix for loopback mounting of hd.img. - - * Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth. - - * pkgs.pm: changed transaction error management this way: if a transaction - fails, DrakX - tries to make as many transaction as there are package that have failed - to be - installed (this means one transaction of only one package). This help - installing - most package that are correct (as a transaction that failed cause all - remaining - package to be not installed). - -2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: 8.0rc -> 8.0 - - * rescue/tree/etc/oem: fix english thanks to Kevin - - * standalone/drakgw: do not die when an initscript returns non-0 - (initscripts too buggy) - -2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated Danish file - - * any.pm: changed ISO_8859-1 TO ISO-8859-1 - -2001/04/09 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings, - use it for kdm message - - * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs - size as the check is done before rounding. - - * bootloader.pm (install_grub): altconfigfile only if /boot is not - reiserfs :-/ - - * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many - modules.cz) - - * install2.pm (main): sets umask (seems like default one is no more 022, - kernel change?) - - * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel - (especially for abnt2 (br)) - - * install_any.pm (setPackages): also have SOUND set in compssUsersChoice - based on pciusbtable - - * share/compssUsers, share/rpmsrate: - - SOUND is now a flag - - AUDIO is the group - - * lang.pm (load_po): sets $lang::charset to the charset used in the po - -2001/04/09 siegel - - * share/po/de.po: fixes - - * Xconfigurator.pm: fixed i18n bug - -2001/04/09 yduret - - * standalone/tinyfirewall: button policy (thx gc) - - * standalone/drakgw: deyvounification : remove some un-useful comments in - code - -2001/04/09 dam's <damien@mandrakesoft.com> - - * tinyfirewall.pm: corrected - - * standalone.pm: install function now returns the return value of the - system. - - * netconnect.pm: corrected buggy cable - removed buggy modem screen repetition - -2001/04/09 François Pons <fpons@mandrakesoft.com> - - * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes - applied). - fixed cancel support. - added conditional restart of gpm on mouse configuration change. - - * fs.pm: removed notail option for reiserfs. - - * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in - DrakConf only). - - * install_any.pm: added missing package to copy. - - * rescue/tree/etc/oem: fixes of grub installation using hd.img - fix the fix for loopback mounting of hd.img. - fixed hd.img access right. - make kernel22 installed for every oem install... - moved some package to closure instead of installed. - added some missing packages. - added nolock option for nfsmount. - added missing package to copy. - -2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton - - * mdk-stage1/Makefile: 8.0beta -> 8.0rc - - * standalone/drakgw: fix for when there is an already existing rc.firewall - complies with old format of drakgw so that upgrades will work - - * rescue/tree/etc/oem: fix english thanks to Kevin - -2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * any.pm: changed ISO_8859-1 TO ISO-8859-1 - -2001/04/09 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings, - use it for kdm message - - * interactive.pm (ask_from_treelistf): make it behaves correctly when - "cancel" is clicked - - * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel - (especially for abnt2 (br)) - - * install2.pm (main): sets umask (seems like default one is no more 022, - kernel change?) - (main): log the umask - - * devices.pm (entry): add hd[ijkl]* - - * bootloader.pm (install_lilo): better handling of map-drive (there's not - always only 2 disks!) - - * lang.pm (load_po): sets $lang::charset to the charset used in the po - -2001/04/09 siegel - - * share/po/de.po: fixes - -2001/04/09 yduret - - * standalone/drakboot: added lilo/grub - - * bootlook.pm: added lilo/grub mode - -2001/04/09 dam's <damien@mandrakesoft.com> - - * modules.pm: removed use install_any - - * tinyfirewall.pm: corrected - - * netconnect.pm: corrected buggy cable - removed buggy modem screen repetition - corrected bad bug when creating new profile - - * standalone.pm: install function now returns the return value of the - system. - - * Makefile: removed install_any - -2001/04/09 François Pons <fpons@mandrakesoft.com> - - * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes - applied). - fixed cancel support. - added conditional restart of gpm on mouse configuration change. - - * rescue/tree/etc/oem: fixed hd.img access right. - make kernel22 installed for every oem install... - moved some package to closure instead of installed. - added some missing packages. - added nolock option for nfsmount. - added missing package to copy. - - * fs.pm: removed notail option for reiserfs. - - * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in - DrakConf only). - - * printer.pm: added Till patch for printer (raw queue and PostScript - queue). - - * install_any.pm: added missing package to copy. - -2001/04/09 kjx - - * share/po/zh_CN.GB2312.po: translate before 8.0 release - -2001/04/09 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): log the umask - - * interactive.pm (ask_from_treelistf): make it behaves correctly when - "cancel" is clicked - - * devices.pm (entry): add hd[ijkl]* - - * bootloader.pm (install_lilo): better handling of map-drive (there's not - always only 2 disks!) - -2001/04/09 yduret - - * bootlook.pm: fix, added lilo/grub frame - fixed till bug - -2001/04/08 dam's <damien@mandrakesoft.com> - - * rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get - rid of kisdn - - * tinyfirewall.pm: updated - added package installation - - * netconnect.pm: get rid of kisdn - updated - no more askwarn in wizard mode - updated - - * standalone/tinyfirewall, standalone/drakgw, my_gtk.pm, - netconnect_consts.pm: updated - - * standalone/net_monitor: removed Data::Dumper - typo - - * standalone/draknet: updated - typo - corrected bad isdn field - -2001/04/08 daouda - - * share/rpmsrate: increase quanta weight . - -2001/04/08 fabman - - * share/po/es.po: updated spanish .po files - -2001/04/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: correct my mistakes on removing some modules from stage1 and - stage2 (-> remove only from stage1) - -2001/04/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/compssUsers.desktop, standalone/draknet: Fixed some english typos - - * standalone/net_monitor, netconnect.pm: Some English changes - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Fixed some english typos - Updated pot file and various po files - -2001/04/08 Pixel <pixel@mandrakesoft.com> - - * fs.pm (write): remove debugging info :-( - - * bootloader.pm (suggest): add option "quiet" to the kernel in fb - (requested by chmou) - - * install_steps.pm (afterInstallPackages): remove setting of kde charset - in kdeglobals (kde is a grown-up now) - -2001/04/08 siegel - - * share/po/de.po: new german version - updates - -2001/04/07 dam's <damien@mandrakesoft.com> - - * netconnect.pm: typo - typo - net_monitor incorporation - - * standalone/net_monitor, Makefile.config: net_monitor incorporation - -2001/04/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po: updated Croatian files - - * share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot, - share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and - Walloon files - -2001/04/07 warly - - * share/compssUsers: PCL-CVS release v2_9_9 - Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker - Working directory: /home/warly/local/share/mdk/gi/perl-install/share/ - In directory .: - Modified compssUsers - In directory po: - patched Up-To-Date po/DrakX.pot - patched Up-To-Date po/ca.po - patched Up-To-Date po/de.po - patched Up-To-Date po/hr.po - patched Up-To-Date po/id.po - patched Up-To-Date po/it.po - patched Up-To-Date po/ja.po - patched Up-To-Date po/ko.po - patched Up-To-Date po/sp.po - patched Up-To-Date po/sr.po - patched Up-To-Date po/vi.po - patched Up-To-Date po/wa.po - - --------------------- End --------------------- - -- last cmd: cvs -f update -d -P -- - - * share/rpmsrate: PCL-CVS release v2_9_9 - Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker - Working directory: /home/warly/local/share/mdk/gi/perl-install/share/ - In directory .: - Modified rpmsrate - - --------------------- End --------------------- - -- last cmd: cvs -f update -d -P -- - -2001/04/06 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff. - -2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: use jeff's suggestions to remove some old stuff - Sun Happy Meal only for Sparc - - * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c: - - - do not print warning when we are in AUTOMATIC and insmod failed - because of file-not-found in mar file (raid cards, etc) - - print "please include msg from Alt-F3" for this warning message to - ease further support - - print pci entry of cards found in te logs - - * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, - mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh - -2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files - - * share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files - -2001/04/06 siegel - - * share/po/de.po: updates - -2001/04/06 yduret - - * standalone/drakgw: swap cancel/configure button - -2001/04/06 dam's <damien@mandrakesoft.com> - - * standalone/draknet2: dead code - - * standalone/net_monitor: updated - - * netconnect.pm: be quiet - -2001/04/06 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff. - fixed if label does not exists and grub refuse to read. - - * install_steps_interactive.pm: fixed typo for cups checking of - installation. - fixed "No printer" after configuring cups for remove server. - added log for CD medium chosen par user. - - * pkgs.pm: added killing on child process of transaction that have been - detached (typically - with pid > transaction_pid and parent is 1). - -2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: - - correct yvounetification in i18n stuff - - remove some remaining debugging printings - - add a bit more of explanations when starting drakgw in wizard mode - - * modules.pm: re integrate some TR net cards - - * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c: - - - do not print warning when we are in AUTOMATIC and insmod failed - because of file-not-found in mar file (raid cards, etc) - - print "please include msg from Alt-F3" for this warning message to - ease further support - - print pci entry of cards found in te logs - -2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated Thai file - Updated pot file - -2001/04/06 yduret - - * standalone/drakgw: swap cancel/configure button - -2001/04/06 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: addde tk like routines - - * netconnect.pm: be quiet - correctedInternetAccessTye and ADSLType - - * Makefile: iCorrected missing file install_any.pm. pixel sux. - - * standalone/draknet2: dead code - - * standalone/net_monitor: updated - updated - updated - updated - updated - added - - * pixmaps/net_d.png, pixmaps/net_c.png: added - - * share/logo-mandrake.png: new icon - -2001/04/06 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: fixed if label does not exists and grub refuse to - read. - - * install_steps_interactive.pm: fixed typo for cups checking of - installation. - fixed "No printer" after configuring cups for remove server. - added log for CD medium chosen par user. - - * pkgs.pm: added killing on child process of transaction that have been - detached (typically - with pid > transaction_pid and parent is 1). - -2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated Thai file - Updated pot file - -2001/04/06 Pixel <pixel@mandrakesoft.com> - - * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove - every modules.cz except the - biggest one - - * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab - and use it - - * install_any.pm: add write_fstab - create install_any::write_fstab and use it - -2001/04/06 yduret - - * bootlook.pm: minor fix - - * standalone/drakgw: recoded a embedded && gtk mode - -2001/04/05 Pixel <pixel@mandrakesoft.com> - - * lang.pm (fs_options): created (gets codepage and iocharset) - - * common.pm (if_): better logging of the error - -2001/04/06 Pixel <pixel@mandrakesoft.com> - - * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove - every modules.cz except the - biggest one - - * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab - and use it - - * install_any.pm: add write_fstab - create install_any::write_fstab and use it - -2001/04/05 Pixel <pixel@mandrakesoft.com> - - * standalone/drakboot: - - fix getting result of fsedit::hds - - cleanup - - * lang.pm (fs_options): created (gets codepage and iocharset) - - * common.pm (if_): better logging of the error - (getVarsFromSh): fix for AA="" inspired by chmou the Great (but the - Great - what?) - - * bootloader.pm (install_grub): small fix - (install_lilo): fix lilo's dumbness (when lilo warns about not the first - drive, it usually fails) - - * diskdrake.pm (More): created, asks for supermount, rescue pt, reload. - - * install_steps_interactive.pm (addUser): default autologin to first user - in beginner - -2001/04/05 Pixel <pixel@mandrakesoft.com> - - * any.pm (autologin): fix - ask for autologin - - * install_steps_interactive.pm: ask for autologin - (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img - was used. Better have a look at /proc/cmdline - - * bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about - not the first drive, it usually fails) - - * pkgs.pm, share/rpmsrate: - - s/PCI/HW/ - - add rio500 - - * install_any.pm (kernelVersion): fix enormous stupid typo - - * common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great - (but the Great - what?) - - * install_steps.pm (exitInstall): oups, report_bug is no more in - commands:: - - * diskdrake.pm (More): created, asks for supermount, rescue pt, reload. - -2001/04/05 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show - automatically selected - packages' to go along with the new description - - * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted - (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'') - - * install_any.pm (kernelVersion): fix enormous stupid typo - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - - * install_steps.pm (exitInstall): oups, report_bug is no more in - commands:: - (configureXBefore): fix the xkb verification (was broken for things like - ``de(nodeadkeys)'') - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - - * any.pm: ask for autologin - - * fs.pm (format_reiserfs): quietly format reiserfs - - * commands.pm: - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - - * install_steps_interactive.pm: ask for autologin - (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img - was used. Better have a look at /proc/cmdline - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - - * share/rpmsrate: - - add ldetect - - the default Aurora chose is the categorizing one - -2001/04/05 siegel - - * share/po/de.po: fixed typo - -2001/04/05 yduret - - * bootlook.pm: fix pablo mess - install autolgin just if we want to autolog :) - -2001/04/05 dam's <damien@mandrakesoft.com> - - * ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure - vs msec. - - * my_gtk.pm: added gtksize - -2001/04/05 fcrozat - - * share/rpmsrate: No longer propose nautilus-mozilla (required by - nautilus) - propose nautilus-trilobite (for Eazel services) - -2001/04/05 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show - automatically selected - packages' to go along with the new description - - * commands.pm, install_steps_interactive.pm, install_any.pm: - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - - * fs.pm (format_reiserfs): quietly format reiserfs - - * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted - (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'') - - * share/rpmsrate: - - add ldetect - - the default Aurora chose is the categorizing one - - * install_steps.pm (configureXBefore): fix the xkb verification (was - broken for things like ``de(nodeadkeys)'') - - move report_bug in install_any - - g_auto_install generates the auto_inst.cfg string without output'ing - it - -2001/04/05 siegel - - * share/po/de.po: fixed typo - -2001/04/05 yduret - - * bootlook.pm: fix pablo mess - install autolgin just if we want to autolog :) - -2001/04/04 Frederic Lepied <flepied@mandrakesoft.com> - - * share/rpmsrate: added SCANNER and PHOTO groups - -2001/04/04 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: make sure to insmod parport_probe alone as it is not - available in 2.4 kernel and - this this not a problem (silent error). - added complete callback to check queue name under cups does contains - only letters, numerics or underscore. - - * install_steps_interactive.pm: fixed printer description in summary. - - * install2.pm: added selectPackagesToUpgrade the first time choosePackages - is called. - - * Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure - to remove 32 bits depth - for such card. - - * detect_devices.pm: fixed parport probe for printer under 2.4 kernel. - - * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption - some times. - - * printer.pm: added die on error of lpadmin. - - * install_any.pm: fixed multiple wait message (looking+finding packages) - -2001/04/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files - -2001/04/04 Pixel <pixel@mandrakesoft.com> - - * modules.pm (tv): add ultracam & usbvideo - (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so - skip them - (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so - skip them - - * install_any.pm (kernelVersion): cleanup - -2001/04/04 Stew Benedict <sbenedict@mandrakesoft.com> - - * install_any.pm: kernelVersion mods for PPC - -2001/04/04 daouda - - * share/rpmsrate: add gatos for ati tv card . - -2001/04/04 Frederic Lepied <flepied@mandrakesoft.com> - - * share/rpmsrate: added SCANNER and PHOTO groups - -2001/04/04 François Pons <fpons@mandrakesoft.com> - - * live_install: unset locale environment for safety - - * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg - (needed for live upgrade so - that error message are not printed) - - * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption - some times. - - * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share - - * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share - - * install2.pm: added selectPackagesToUpgrade the first time choosePackages - is called. - - * install_any.pm: fixed multiple wait message (looking+finding packages) - -2001/04/04 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (setPackages): better handling for tv, photo and scanner - - * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on - stage1, so skip them - - add photo, tv and scanner - - add pegasus and kaweth modules - -2001/04/04 dam's <damien@mandrakesoft.com> - - * netconnect.pm: typo - -2001/04/04 daouda - - * share/rpmsrate: add gatos for ati tv card . - reput klyx but in lower weight (2) - removed klyx from rpmsrate (bad idea according to pixel ) - add klyx in install "Office KDE" - -2001/04/04 François Pons <fpons@mandrakesoft.com> - - * live_install: unset locale environment for safety - - * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg - (needed for live upgrade so - that error message are not printed) - - * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share - - * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share - - * install2.pm: added selectPackagesToUpgrade the first time choosePackages - is called. - - * install_steps.pm: disable frame buffer for Matrox cards. - - * install_any.pm: fixed multiple wait message (looking+finding packages) - -2001/04/04 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (setPackages): better handling for tv, photo and scanner - - * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on - stage1, so skip them - - add photo, tv and scanner - - add pegasus and kaweth modules - - * share/compssUsers: remove TV (it is a hardware flag) - -2001/04/03 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: keep mount point configuration trhough multi-passes of - diskdrake and others. - - * Xconfigurator.pm: prefer XF3 for SiS card. - -2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file - -2001/04/03 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: do not use isSpecial which should only be used on - partitions - (main): do not have loopback pseudo hd in hds out of diskdrake - - * modules.pm (load_raw): add the require install_any - - * share/rpmsrate: restore Aurora (i really don't understand what i've done - with flag AURORA a month ago) to a simple behaviour - - * install_steps_interactive.pm (choosePackages): do not make a special - case for upgrades (was: select the - min size, which was on contradiction with profile selection) - - * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2 - - * standalone/mousedrake: fix horrible error (using an undefined $o) - - * share/list: add back mkreiserfs - - * standalone/XFdrake: don't start xfs if skiptest - - * fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains - only true - hard drives (not pseudo one like raid, loopback and lvm) - - * bootloader.pm (suggest): trap strange error. Should not really fix the - pb - - * install_steps.pm (setupBootloaderBefore): nicer Aurora presence - detetection - - * lang.pm (charset): fix for chineese which have charset in the name - - * Makefile: no more special case for mkreiserfs (can be done via -v 1) - - * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic - dependencies" - - * install_any.pm (setPackages): don't preselect profiles in upgrade - (setPackages): handle Flag:<theflag> - (setPackages): install kernel22 if install kernel is a 2.2 - - * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong - (didn't - propose to format it) - protect the loading of module lvm-mod - -2001/04/03 Stew Benedict <sbenedict@mandrakesoft.com> - - * install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button - emulation - -2001/04/03 dam's <damien@mandrakesoft.com> - - * netconnect.pm: a lot of bugfixs - corrected bad flag test - corrected bad priority - - * standalone/draknet: typo - bug fixes - removed debugging messages and Data::Dumper - corrected bad flag test - -2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file - -2001/04/03 Pixel <pixel@mandrakesoft.com> - - * modules.pm (load_raw): add the require install_any - - * share/rpmsrate: restore Aurora (i really don't understand what i've done - with flag AURORA a month ago) to a simple behaviour - - * lang.pm (charset): fix for chineese which have charset in the name - - * install_steps.pm (setupBootloaderBefore): nicer Aurora presence - detetection - - * Makefile: no more special case for mkreiserfs (can be done via -v 1) - - * install_steps_interactive.pm (choosePackages): do not make a special - case for upgrades (was: select the - min size, which was on contradiction with profile selection) - - * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2 - - * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic - dependencies" - - * install_any.pm (setPackages): don't preselect profiles in upgrade - (setPackages): handle Flag:<theflag> - (setPackages): install kernel22 if install kernel is a 2.2 - - * share/list: add back mkreiserfs - - * standalone/XFdrake: don't start xfs if skiptest - - * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong - (didn't - propose to format it) - protect the loading of module lvm-mod - -2001/04/02 dam's <damien@mandrakesoft.com> - - * modules.pm: corrected petite's mistake - - * netconnect.pm: protecting against non existent files - -2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix - comply to all.kernels policy - - * tools/make_mdkinst_stage2: fix remove of alternate cz modules - -2001/04/02 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/cs.po: Updated Czech file - - * lang.pm: codepage option to mount requires only numeric values, eg "437" - and not "cp437" - Changed accordingly in the lists - - * share/rpmsrate: Install latin2 Postscript fonts for latin2 locales, - install fonts-ttf-thai for Thai locale - -2001/04/02 Pixel <pixel@mandrakesoft.com> - - * c/Makefile: small cleanup for pcmcia_probe.c - - * tools/Makefile (install): s/-r/-rf/ - - * install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/ - (setPackages): install imwheel if nbuttons > 3 - - * c/Makefile.PL: small cleanup for pcmcia_probe.c - don't use pcmcia_probe.o from stage1, better compile it here, otherwise - perl-install require mdk-stage1 to do compiled => circular dependency - - * Makefile: ignore dams or at least dams errors - - * c/.cvsignore: add pcmcia_probe.c - -2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/make_rescue_img: fix pixelization (aka take advantage of - all.kernels/.main) - -2001/04/02 Pixel <pixel@mandrakesoft.com> - - * tools/Makefile (install): s/-r/-rf/ - -2001/03/30 Pixel <pixel@mandrakesoft.com> - - * tools/Makefile (install): fix the globbing for packdrake.pm and - rpmtools.pm - -2001/03/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/drvinst: test for "Card:" and not install, some videoboards are - not reported as DISPLAY_VGA :-( - - * tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img, - mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more - than one boot kernel :-) - - * rescue/list.i386: add reiserfsck - -2001/03/29 dam's <damien@mandrakesoft.com> - - * tinyfirewall.pm: bad message at the end if kernel2.4 - - * netconnect.pm: added missing Device in Ethx when saving/loading - - * standalone/draknet: translation - -2001/03/28 dam's <damien@mandrakesoft.com> - - * standalone/tinyfirewall: typo - - * interactive_gtk.pm: corrected pixel shit if embedded - - * standalone/draksec: embedded mode - - * standalone/draknet: corrected gtkpng in gtkwpm - added translation - - * bootlook.pm: cute button box - - * tinyfirewall.pm: workaround to make it work if kernel 2.4 - -2001/03/28 fcrozat - - * share/rpmsrate: gmc is back in standard GNOME install, for people with - existing home - -2001/03/28 François Pons <fpons@mandrakesoft.com> - - * standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for - standalone XFdrake and mousedrake (multi-mouse and - correct probe (USB)). - - * Xconfig.pm: re-fix mouse fix. - fixed wrong mouse probe. - fixed for standalone XFdrake and mousedrake (multi-mouse and - correct probe (USB)). - - * Xconfigurator.pm: restore multi mouse support for XF3. - -2001/03/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish, - Finnish, Croatian and Turkish files - - * share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files - - * share/po/az.po: Updated Azeri and Danish files - - * share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish - files - Updated Finnish, Korean and Slovak files - - * share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish - files - Updated Azeri and Danish files - -2001/03/28 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: add fstab in the log - - * interactive_gtk.pm: better default_size setting - - * commands.pm: fix typo - add fstab in the log - - * install_gtk.pm (test_mouse): ensure the test mouse is not too big - -2001/03/28 warly - - * share/rpmsrate: add some commercial apps - -2001/03/27 dam's <damien@mandrakesoft.com> - - * bootlook.pm: added kill USR2 before main - - * share/help.png: changed help button - - * share/help.xpm: changed help - - * tinyfirewall.pm: workaround to make it xork. - -2001/03/27 François Pons <fpons@mandrakesoft.com> - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image. - - * Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported - currently. - -2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers - -2001/03/27 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po, - share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po, - share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese, - Indonesian, Japanese, Korean and Walloon files - changed i18n_compssUsers to make "path" i18n'able - -2001/03/27 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: warnAboutNaughtyServers - (setPackages): default profiles selection to GNOME, KDE, CONFIG - - * install_steps_interactive.pm: warnAboutNaughtyServers - (summary): fix displaying of printer configured - - * pkgs.pm: warnAboutNaughtyServers - - * install_steps_gtk.pm (installPackages): catch the no png file exception - (in case warly is dumb again) - - * my_gtk.pm: try to fix displaying in draksec - (create_box_with_title): save the box_size in field "box_size" - - * install2.pm, any.pm: remove use of Bastille. get back to the good state - we had :) - - * interactive_gtk.pm: try to fix displaying in draksec - - * share/rpmsrate: move back Bastille-Curses-module to CONFIG - - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is - LOCALES"zh" - - raise WindowMaker - - add xfce - - am-utils is a server - - raise some stuff in CONFIG to have stuff there - - remove drakxtools from CONFIG (DrakConf requires drakxtools) - - DrakConf from 5 to 4 - - * lang.pm (langsLANGUAGE): give the list of languages - -2001/03/27 Stew Benedict <sbenedict@mandrakesoft.com> - - * install_steps_interactive.pm: change verbage on bootloader warning - -2001/03/27 siegel - - * share/po/de.po: minor typo-fixes - -2001/03/27 dam's <damien@mandrakesoft.com> - - * share/help.png: changed help button - - * share/help.xpm: changed help - -2001/03/27 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now - postponed at end of install - and only if rpm-4.0 or above has been installed. - - * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image. - - * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added - support for two mice (laptop). The second mice is generally PS/2 as - probe can says it is present. - -2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers - -2001/03/27 Pixel <pixel@mandrakesoft.com> - - * any.pm, install2.pm: remove use of Bastille. get back to the good state - we had :) - - * install_any.pm: warnAboutNaughtyServers - (setPackages): default profiles selection to GNOME, KDE, CONFIG - - * share/rpmsrate: move back Bastille-Curses-module to CONFIG - - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is - LOCALES"zh" - - raise WindowMaker - - add xfce - - am-utils is a server - - raise some stuff in CONFIG to have stuff there - - remove drakxtools from CONFIG (DrakConf requires drakxtools) - - DrakConf from 5 to 4 - - * install_steps_interactive.pm: warnAboutNaughtyServers - (summary): fix displaying of printer configured - - * lang.pm (langsLANGUAGE): give the list of languages - - * pkgs.pm: warnAboutNaughtyServers - - * install_steps_gtk.pm (installPackages): catch the no png file exception - (in case warly is dumb again) - -2001/03/27 siegel - - * share/po/i18n_compssUsers: i18n group names - - * share/po/de.po: minor typo-fixes - new german version - -2001/03/26 daouda - - * share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate) - -2001/03/26 fcrozat - - * share/rpmsrate: Install xscreensaver when installing GNOME - -2001/03/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: first attempt at pixelization of code (till's cups - patches) - -2001/03/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon - files - - * share/po/vi.po: Updated Croatian, vietnamese and Walloon files - Updated Portuguese, Swedish and Thai files - - * share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po, - share/po/sv.po: Updated Portuguese, Swedish and Thai files - -2001/03/25 Pixel <pixel@mandrakesoft.com> - - * http.pm (getFile): verify the return value of the server. If not 200 - (aka Ok), - return undef - - * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp - and libqtcups2 for kups in - pkg_install_if_requires_satisfied - -2001/03/25 siegel - - * share/po/de.po: new german version - -2001/03/25 fabman - - * share/po/es.po: updated spanish .po file - -2001/03/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po: Updated Korean file - - * share/po/sv.po: Updated Swedish file - -2001/03/25 Pixel <pixel@mandrakesoft.com> - - * http.pm (getFile): verify the return value of the server. If not 200 - (aka Ok), - return undef - - * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp - and libqtcups2 for kups in - pkg_install_if_requires_satisfied - - * any.pm (ask_users): fix dead-loop - - * bootloader.pm (suggest): add entry for nt - -2001/03/25 siegel - - * share/po/de.po: new german version - -2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/vi.po: Updated Vietnamese file - -2001/03/24 Pixel <pixel@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which - is unneeded (and "member" of merge2pcitable - was clashing) - - * any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user - is given. - - * install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users - - * install_any.pm (disable_user_view): created, takes care of gdm too - (taken from msec) - - * mouse.pm (detect): fix francois... uh, no too hard. easier to fix - francois's bugs ;pp - - * timezone.pm (%l2t): fix for fuzzyChoice - - * share/keyboards.tar.bz2: - - readding with -kb - - fixing permissions on xmodmap.kr - remove before adding again with -kb - - * modules.pm: have natsemi in network.img - -2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated Azeri file - -2001/03/24 Pixel <pixel@mandrakesoft.com> - - * mouse.pm (detect): fix francois... uh, no too hard. easier to fix - francois's bugs ;pp - - * timezone.pm (%l2t): fix for fuzzyChoice - - * modules.pm: - - add missing modules (now in sync with pcitable) - - add 'media' class - - cleanup - -2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Updated Azeri file - -2001/03/24 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (copy_advertising): fix escaping $f causing perl to - segfault :-( - (copy_advertising): handle i18n'ed advertising - - * pkgs.pm: cleanup - - * modules.pm: - - add missing modules (now in sync with pcitable) - - add 'media' class - - cleanup - -2001/03/24 dam's <damien@mandrakesoft.com> - - * tinyfirewall.pm: corrected bad exited. reincorporated some ugly code, - need fixing - -2001/03/24 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (copy_advertising): handle i18n'ed advertising - - * modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel - 2.4 - -2001/03/23 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed screen id for Device to be present whenever the - same BusID is used. - added multiple tablet support (wacom), moved usb probe for mouse and - tablet - at the beginning. - - * printerdrake.pm: Do not ask to configure a printer if standalone, - previously only for embended. - - * Xconfig.pm: fixed typo for wacom. - added multiple tablet support (wacom), moved usb probe for mouse and - tablet - at the beginning. - - * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added - multiple tablet support (wacom), moved usb probe for mouse and tablet - at the beginning. - -2001/03/23 Pixel <pixel@mandrakesoft.com> - - * interactive.pm (ask_from_listf_no_check): fix the fix fix fix - (ask_from_listf_no_check): fix the fix fix - - * common.pm (formatError): created - - * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in - DHCP/BOOTP - - * diskdrake.pm (try): format the error (no more "at line ...") - (Add2LVM): "new" was not i18n'ed - - * install_steps_interactive.pm (exitInstall): no "cancel" button - - * partition_table.pm: add Empty to bad_types - - * fsedit.pm (change_type): When changing a partition type from ext2fs to - Linux RAID - (or LVM), the mount point should be removed. - -2001/03/23 siegel - - * share/po/de.po: new german version - -2001/03/23 dam's <damien@mandrakesoft.com> - - * tinyfirewall.pm: corrected bad translation - correctedd typo - updated - code cleaning - tinyfirewall now works. - - * Makefile.config: added tinyfirewall - - * any.pm, mouse.pm: added /dev/modem in modem list selection - - * standalone/drakxconf: added tinyfirewall entry - - * standalone/tinyfirewall: added update code - updated wrapper to launch tinyfirewall in embedded mode - - * netconnect.pm: added /dev/modem in modem list selection - netconnect doesn't write the file 1 - -2001/03/23 fcrozat - - * share/rpmsrate: nautilus-mozilla and xalf are installed by default in - GNOME - gmc is not installed by default in GNOME - gabber gaim are moved to instant messaging - gcombust in moved to GNOME CD burner - gtm is installed by GNOME/File transfer - mozilla is installed by default as www browser - galeon is installed by default as www browser for GNOME - -2001/03/23 François Pons <fpons@mandrakesoft.com> - - * tools/syncrpms: added size-stamp test to copy identical file in version, - release. - - * Xconfig.pm: fixed typo for wacom. - added multiple tablet support (wacom), moved usb probe for mouse and - tablet - at the beginning. - - * Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe - for mouse and tablet - at the beginning. - fixed wrong usage of Screen keyword in Device section, should be present - and - reseted for any multi head card with only one BusID. - - * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added - multiple tablet support (wacom), moved usb probe for mouse and tablet - at the beginning. - -2001/03/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file - Updated Finnish file - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, - share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, - share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: Added Vietnamese file - -2001/03/23 Pixel <pixel@mandrakesoft.com> - - * any.pm: ifix the dams stuff - - * install_steps_interactive.pm (exitInstall): no "cancel" button - - * share/po/i18n_compssUsers: fix for better compliance with po format - - * netconnect.pm: ifix the dams stuff - cleanup and enable gzip'ed isdn.db - - * Makefile: gzip ldetect-lst files - - * modules.pm: add i810_audio (still need a script to add missing one and - keep in sync) - - * bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives - - * interactive.pm (ask_from_listf_no_check): fix the fix fix fix - (ask_from_listf_no_check): fix the fix fix - (ask_from_listf_no_check): fix the bad fix - - * common.pm (formatError): created - (openFileMaybeCompressed, catMaybeCompressed): added - (getVarsFromSh): take care of comments - - * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in - DHCP/BOOTP - - * partition_table.pm: add Empty to bad_types - - * mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug) - - * fsedit.pm (change_type): When changing a partition type from ext2fs to - Linux RAID - (or LVM), the mount point should be removed. - - * detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale - (isFloppyOrHD): floppy type is 'fd', not 'floppy' - (stringlist): nicer (a la new lspcidrake) - - * Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and - MonitorsDB - - * diskdrake.pm (try): format the error (no more "at line ...") - (Add2LVM): "new" was not i18n'ed - -2001/03/23 Stew Benedict <sbenedict@mandrakesoft.com> - - * mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC, - use vmlinux for PPC - prepend of_dev to initrd stanza in yaboot.conf - add 1-button mouse for PPC - -2001/03/23 siegel - - * share/po/de.po: new german version - -2001/03/22 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139: - Add 8139 grub stage. - -2001/03/22 dam's <damien@mandrakesoft.com> - - * bootlook.pm: corrected mapn - - * standalone/draknet: removed use Data::Dumper - - * netconnect.pm: removed mail informat oin - comment update - - * tinyfirewall.pm: removed use Data::Dumper - working on tinyfirewall - -2001/03/22 fabman - - * share/po/es.po: changed "swap" for "intercambio" in the spanish .po - files - updated DrakX, menudrake and urpmi es.po files - -2001/03/22 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed wrong access to undefined value promoted to - empty array reference. - -2001/03/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/probing.c, mdk-stage1/tools.h: - - fix detection of more than 3 scsi attached devices - - cleaner code for cmp of ptr against static strings - -2001/03/22 Pixel <pixel@mandrakesoft.com> - - * standalone/mousedrake: remove test ugliness of dams - - * c/Makefile.PL: no pcmcia_probe in drakxtools - - * modules.pm (load_thiskind): indent as it should be - - * install_steps_interactive.pm (generateAutoInstFloppy): fix the message - which was uptodate only for - sparc :-( - - * Xconfigurator.pm: no need for "use Data::Dumper;" - -2001/03/22 Stew Benedict <sbenedict@mandrakesoft.com> - - * modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should - have been mace - -2001/03/22 yduret - - * bootlook.pm: mapn works tx dams - nmap - added mapn fun to reduce code.. testing it - added install of rpm - xpm png files - - * pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm, - pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm, - pixmaps/verti.xpm: convert xpm to png - -2001/03/21 dam's <damien@mandrakesoft.com> - - * standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool - - * netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug - -2001/03/21 François Pons <fpons@mandrakesoft.com> - - * detect_devices.pm: added pci id reference. - - * c/stuff.xs.pm: added support for pci id extraction. - - * Xconfigurator.pm: fixed wrong XFree4 version reference. - fixed null string in monitor identifier. - added multi-head support in XFdrake. - -2001/03/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: honour embedded mode - - * share/compssUsers: move NETWORKING_FILE (contains stuff for nfs - mounting..) from Internet - Station to Network Computer - -2001/03/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po, - share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po, - share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, - share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated - Croatian and Serbian files - - * share/po/sp.po, share/po/sr.po: Updated Serbian files - Updated Croatian and Serbian files - - * share/po/az.po: Updated Azeri file - Updated Croatian and Serbian files - - * share/po/sk.po: Updated Azeri and Slovak files - Updated Croatian and Serbian files - - * lang.pm: Added fields to charsets table holding info for mount - (iocharset and - codepage mount options) - -2001/03/21 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (g_default_packages): nice warning if mount in vfat fails - - * share/rpmsrate: move webmin to CONFIG - remove ipchains and iptables, raise gfcc - - * docs/README: add cvs howto - - * install_steps_interactive.pm (summary): fix - - * detect_devices.pm: old code - - * bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo - doesn't like them - (add_kernel): cleanup - (suggest): make it work with kernel22-secure and no kernel22 - - * modules.pm (when_load): move the alias sound to when_load, don't check - ppc as it - could be used for non-ppc - (load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for - every - load_thiskind, not only scsi one - - * c/stuff.xs.pm (from_utf8): as pablo said... - -2001/03/21 siegel - - * share/po/de.po: new german version - new german version - -2001/03/20 Pixel <pixel@mandrakesoft.com> - - * modules.pm (@drivers_by_category): if_ization - (load_thiskind): cleanup - -2001/03/21 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (add_kernel): cleanup - (suggest): make it work with kernel22-secure and no kernel22 - - * share/rpmsrate: remove ipchains and iptables, raise gfcc - -2001/03/20 dam's <damien@mandrakesoft.com> - - * interactive.pm: no wizard if warning - -2001/03/20 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: fix pcmcia functions only on x86 - - create install_any::unselectMostPackages - - use it instead of pkgs::unselectAllPackages (otherwise - default_packages ends up non-selected) - - * modules.pm (@drivers_by_category): if_ization - (load_thiskind): cleanup - - * any.pm, install2.pm, share/rpmsrate: use bastille backend - - * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86 - - * install_steps.pm, install_any.pm: - - create install_any::unselectMostPackages - - use it instead of pkgs::unselectAllPackages (otherwise - default_packages ends up non-selected) - -2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com> - - * modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add - routine for - PPC - any.pm: double "Append" entry in expert mode for yaboot.conf - PPC - install_steps_interactive: setup dmasound - PPC - modules.pm: load Mac hardware modules - PPC - -2001/03/20 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bug in reading resolv.conf, and changed chmod - for net_cnx_* - - * interactive.pm: no wizard if warning - - * standalone/draknet: added update after {dis}connecting - -2001/03/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * diskdrake.pm: fix formatting of raid - -2001/03/20 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: use bastille backend - - add nautilus - - * install_steps_interactive.pm: fix pcmcia functions only on x86 - - create install_any::unselectMostPackages - - use it instead of pkgs::unselectAllPackages (otherwise - default_packages ends up non-selected) - (setupSCSI): don't pcmcia_probe if testing - - tellAboutProprietaryModules moved to setupSCSI - - miscellaneous step re-enabled, called Security - - pcmcia_probe moved to setupSCSI, skipped in noauto - - * any.pm: use bastille backend - - * install2.pm: use bastille backend - - tellAboutProprietaryModules moved to setupSCSI - - miscellaneous step re-enabled, called Security - - pcmcia_probe moved to setupSCSI, skipped in noauto - have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the - parameter any more) - - * netconnect.pm (modem_detect_backend): cleanup - - * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86 - have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the - parameter any more) - - * Makefile: install cardmgr - - * install_any.pm: - - create install_any::unselectMostPackages - - use it instead of pkgs::unselectAllPackages (otherwise - default_packages ends up non-selected) - (setPackages): install usbd in case of usb - - * install_steps.pm: - - create install_any::unselectMostPackages - - use it instead of pkgs::unselectAllPackages (otherwise - default_packages ends up non-selected) - -2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com> - - * any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC - detect_devices.pm: forgot to remove commented code after test - netconnect.pm: load macserial module for PPC - -2001/03/20 dam's <damien@mandrakesoft.com> - - * standalone/draknet, netconnect.pm: improved connection windows, and - loading / saving of /etc/sysconfig/network-scripot/netècnx* - -2001/03/20 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: - - add nautilus - - * install_any.pm (setPackages): install usbd in case of usb - - * Makefile: install cardmgr - -2001/03/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * fsedit.pm: fix loopback appearing twice in format partition - - * diskdrake.pm: fix "loopback" name of loopback tab in diskdrake - -2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po: updated korean file - Updated po files - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files - -2001/03/19 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (computeGroupSize): fix hacks, better hacks - (saveCompssUsers): fix - - * install_steps_interactive.pm (chooseGroups): - - make the computed size work - - unselectAll when a profile is unselected - - * interactive_gtk.pm (ask_from_entries_refW): better sizing in case of - scrolls - -2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com> - - * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC - -2001/03/19 dam's <damien@mandrakesoft.com> - - * standalone/draknet: corrected graphical layout for newbies - - * netconnect.pm: added net_cnx_{up, down} save - -2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ko.po: updated korean file - Updated po files - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files - -2001/03/19 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (computeGroupSize): fix hacks, better hacks - (saveCompssUsers): fix - - * share/rpmsrate: - - add rxvt-CJK - - exchange xterm and rxvt - - move bc from SCIENCES to SYSTEM - - * interactive_newt.pm (ask_from_entries_refW): - - ensure the width is less than $width - 7 (in french and 80x25, the - treelist was too big) - - if term is very big, use 10 lines instead of 5 - - if no button is asked, but one in any case otherwise it's buggy - - * install_steps_interactive.pm (chooseGroups): - - make the computed size work - - unselectAll when a profile is unselected - - * interactive.pm (ask_from_listf_no_check): fix fix - (ask_from_listf_no_check): fix the filtering of exceptions - -2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com> - - * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC - -2001/03/18 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for - hd-install when you provide a not valid ISO (cd #2 for example) - - * mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h, - mdk-stage1/log.h: use some help with __attribute__ - -2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup - - * mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync - - * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in - editing ask_from_entries in stdio mode - - * mdk-stage1/pci-resource/Makefile: do not use marfiles for deps - -2001/03/17 Pixel <pixel@mandrakesoft.com> - - * lang.pm (write_langs): in case of empty %_install_langs, don't write it - - * install_steps.pm (pkg_install_if_requires_satisfied): better logging - - * share/rpmsrate: add gpm & evolution - -2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to - work with dietlibc - - * mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET - for testing purposes.. - - * mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new - mkinitrd package release - - * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in - editing ask_from_entries in stdio mode - -2001/03/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sv.po: updated Swedish file - - * share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese - keyboard - - * keyboard.pm: Added choice of Korean keyboard - -2001/03/17 Pixel <pixel@mandrakesoft.com> - - * lang.pm (write_langs): in case of empty %_install_langs, don't write it - - * install_steps.pm (pkg_install_if_requires_satisfied): better logging - - * share/rpmsrate: add gpm & evolution - -2001/03/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/Makefile: refine deps - - * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile, - mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper - - * mdk-stage1/insmod-busybox/insmod.c: force load - -2001/03/16 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (setPackages): set flag "TV" when bttv hardware is there - - * share/compssUsers, share/rpmsrate: move out TV from VIDEO - - * diskdrake.pm (Type): fix the code verifying size >32 for reiserfs - - * modules.pm (write_conf): better logging - - * c/stuff.xs.pm: add from_utf8 - - * c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and - description - -2001/03/16 Stew Benedict <sbenedict@mandrakesoft.com> - - * tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert, - tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic, - mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad - gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot - - remove/re-add - did not use -kb switch - thx Pixel - -2001/03/15 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: SiS card are no more prefered for XF3. - added standalone support to prefer XF3 or XF4 to - keep current used server version. - - * standalone/XFdrake: remove duplicate begin label. - take care of existing configuration. - -2001/03/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: skip dc395x_trm on stage1 - dc395x_trm is back in 2.4 - - * share/compssUsers: try to enhance - -2001/03/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/az.po: updated Azeri file - -2001/03/15 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says - this is not needed anymore :) - -2001/03/15 Stew Benedict <sbenedict@mandrakesoft.com> - - * tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot, - tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot, - tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD, - mkhybrid-1.12b5.4, yaboot: create PPC CD - - * install_steps_interactive.pm, detect_devices.pm, bootloader.pm: - bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed - temporary file read/write per Pixel - - * Xconfigurator.pm: force 1024x768 on Powerbook - - * tools/ppc/README: README: README for creating PPC boot CD - -2001/03/14 dam's <damien@mandrakesoft.com> - - * netconnect.pm: changed label + profile before types.. - -2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, - share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po, - share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, - share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, - share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: - corrected the script and updated po files - -2001/03/14 Pixel <pixel@mandrakesoft.com> - - * share/compssUsers: keep only one Development entry - - * install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation - - * bootlook.pm: fix for perl2fcalls - - * install_steps_interactive.pm (chooseGroups): disable the size display as - it is wrong (for the beta2) - -2001/03/14 Stew Benedict <sbenedict@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps_gtk.pm, - partition_table_mac.pm, bootloader.pm: fix bootstrap partition - creation/tracking - allow Xpmac to launch in 2 modes based on cmdline - -2001/03/14 siegel - - * share/po/de.po: new german version - -2001/03/14 dam's <damien@mandrakesoft.com> - - * netconnect.pm: changed label + profile before types.. - -2001/03/14 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed unselect management of choice, propagate unselection - correctly to all - packages requiring unselected package. - - * install_any.pm: use LD_LOADER when invoking parshedlist. - -2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po, share/po/nl.po: updated Norwegian file - - * share/locales.tar.bz2, share/gconv.tar.bz2, share/list, - share/fonts.tar.bz2: new fonts and locale files - - * share/po/ko.po: Fixed email of Korean translator - updated Korean file - - * install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm: - completed language list - completed language->keyboard guessing list - aesthetic changes to an English message (removed \n and let gtk+ - do the formatting, it is nicer) - - * share/po/az.po: Updated Azeri file - -2001/03/14 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm: fix the compssUsers interpretation - (readCompssUsers): change the key of compssUsers, added "label" - (computeGroupSize): fix bug - (computeGroupSize): fix logging - - * share/gconv.tar.bz2: moved to share/list - - * bootlook.pm: fix for perl2fcalls - - * share/rpmsrate: CLIENT & SERVER is prohibited - - * timezone.pm: - - add many timezones - - defaults to GMT - - verifier added - - * install_steps_gtk.pm: fix the compssUsers interpretation - (choosePackagesTree): fix - - * common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return - the number - of matched words/characters - - * share/compssUsers: keep only one Development entry - CLIENT & SERVER is prohibited - - * install_steps_interactive.pm (chooseGroups): disable the size display as - it is wrong (for the beta2) - (chooseGroups): add path for seperating groups, use "label" for the - group text - - * Makefile: remove gconv - -2001/03/13 siegel - - * share/po/de.po: Fixed typos. - -2001/03/13 siegel - - * share/po/de.po: Fixed typos. - -2001/03/13 dam's <damien@mandrakesoft.com> - - * share/help.png: changed - -2001/03/13 Pixel <pixel@mandrakesoft.com> - - * install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers - for the tree - - * standalone/drakgw: pixelization - - * share/rpmsrate: HDF can't be at the beginning of the line or it will be - taken as a flag - moved icewm to SYSTEM with !KDE !GNOME - - * pkgs.pm: compss is deprecated. use compssUsers for the tree - (readCompssUsers): get the "path" - - * install_steps.pm: compss is deprecated. use compssUsers for the tree - renamef created and used - - * detect_devices.pm (burners): don't use cdroms() which return scdX for - ide burners, and - isBurner don't use the same technique. so use get() and grep for type - "cdrom" - - * install_any.pm: compss is deprecated. use compssUsers for the tree - (setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA - renamef created and used - - * install_steps_interactive.pm: compss is deprecated. use compssUsers for - the tree - (chooseGroups): fix to get back the icons - (chooseGroups): size computed should work - - * common.pm: renamef created and used - -2001/03/13 siegel - - * share/po/de.po: new german translation - -2001/03/13 warly - - * share/compssUsers: fix {W,w}orkstation - remove ^Server and ^Development - -2001/03/13 Pixel <pixel@mandrakesoft.com> - - * standalone/drakgw: pixelization - - * install_steps_interactive.pm (chooseGroups): size computed should work - - * share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME - - * install_steps.pm, common.pm, install_any.pm: renamef created and used - -2001/03/12 dam's <damien@mandrakesoft.com> - - * Makefile: removed wizard pixmap from install - - * pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated - added pixmap for wizard - - * my_gtk.pm: new wizard layout, with pixmaps. - added ugly workaround for ugly Hseparator - - * share/step-red.png, share/step-orange.png, share/step-orange-click.png, - share/step-green-click.png, share/step-green.png, share/step-red-on.png, - share/step-orange-on.png, share/step-green-on.png, - share/step-green_s.png, share/step-red-click.png: removing bad png - files... - - * share/help.png: new help button. blah - - * install_any.pm: typo - - * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated - - * netconnect.pm: corrected askokcancel -> askyesorno - - * interactive.pm: corrected bad okcanel in wizard mode - - * install_steps_interactive.pm: added $::isInstall - - * share/logo-mandrake_trans.png: new logo for other themes - - * services.pm: removed use Data::Dumper - corrected bug in display - -2001/03/12 François Pons <fpons@mandrakesoft.com> - - * modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm, - live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should - work for other - combination but not tested. fixed locale usage and gtk environment - interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX). - created LD_LOADER environment variable to keep track of right ELF loader - to be used for the GLIBC used by the live update. added internal PATH - to LD_LIBRARY_PATH as ELF loader only check this one and not PATH. - -2001/03/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: - - make it work as a wizard - - make it work with iptables (kernel-2.4) - - * modules.pm: reflect Jeff Garzik's answers to my questions on kernel@ - -2001/03/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po, - share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po, - share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque - file - -2001/03/12 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (afterInstallPackages): save the compssUsers flattened - for rpmdrake - - * install_steps_interactive.pm (summary): remove 'clicked' (labels are - used) - put everything in %compssUsers, use field flags for the flags :) - - * pkgs.pm (computeGroupSize): log what is found - (saveCompssUsers): make it work - (readCompssUsers): clean-up - (saveCompssUsers): created - put everything in %compssUsers, use field flags for the flags :) - (computeGroupSize): created - - * share/rpmsrate: lower Zope (anyway Zope is not in main) - - * fsedit.pm (hds): search for existing lvm in @hds *and* @lvms - - * commands.pm (loadkeys): created - - * install_any.pm (setPackages): don't readCompssUsers with $o->{packages} - (setPackages): kernel-secure doesn't exist anymore, use kernel22-secure. - don't use kernel-secure as a kernel-smp. - put everything in %compssUsers, use field flags for the flags :) - (setPackages): set compssUsersChoice "3D" if 3D enabled graphic card - - * interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries - add "label" type - - * share/compssUsers: change the path format - - * detect_devices.pm (get_mac_model): fix for perl2fcalls - - * interactive.pm: add "label" type - -2001/03/12 warly - - * share/compssUsers: add some NETWORKING_* that were empty - dispach some DEVELOPMENT and SERVER to more appropriate groups - added path - - * share/rpmsrate: add some NETWORKING_* that were empty - dispach some DEVELOPMENT and SERVER to more appropriate groups - -2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * ftp.pm: do not retry on 550 file unavailable - -2001/03/12 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled - graphic card - -2001/03/11 dam's <damien@mandrakesoft.com> - - * services.pm: no more restart button - -2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * ftp.pm: do not retry on 550 file unavailable - -2001/03/11 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (summary): fix clicked empty handler - - * share/rpmsrate: - - lower tftp-server - - a lot of modifs (thanks to Prana) - -2001/03/10 dam's <damien@mandrakesoft.com> - - * standalone/drakxservices: embedded mode - - * my_gtk.pm: added gtkset_border_width - typo again - typo - added gtkmove - added gtkset_modal and gtkappenditems - - * services.pm: fixed big bug. - imajor improvement. - improved. - -2001/03/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated Korean file - -2001/03/09 dam's <damien@mandrakesoft.com> - - * standalone/drakxconf: added harddrake - - * my_gtk.pm: applied gtkradio - created create_boxradio - in wizard mode : list -> radio buttons - added gtkradio - - * bootlook.pm: workaround for the graphical layout. - - * install_steps_gtk.pm: applied gtkradio - created create_boxradio - in wizard mode : list -> radio buttons - - * printerdrake.pm: if embedded -> no first question - - * interactive_gtk.pm: added tooltips to create_boxradio - applied gtkradio - created create_boxradio - in wizard mode : list -> radio buttons - -2001/03/09 Pixel <pixel@mandrakesoft.com> - - * share/rpmsrate: a hell lot of modifications, mostly cleanup of - DEVELOPEMENT - -2001/03/09 Stew Benedict <sbenedict@mandrakesoft.com> - - * Xconfigurator_consts.pm: keyboard mapping for PPC - - * detect_devices.pm: routine to detect MacIntosh model code - -2001/03/09 dam's <damien@mandrakesoft.com> - - * my_gtk.pm: added gtkradio - - * standalone/draknet: changed graphical layout, expert mode - -2001/03/09 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (read_rpmsrate): handle the special case of packages requiring - locales-*, - adding the flag LOCALES"*" for them - - * install_steps_interactive.pm (choosePackages): moved the log to - install2::choosePackages (to have it in - auto_installs too) - - * install_any.pm (setPackages): set compssUsersChoice LOCALES"*" - - * install2.pm (choosePackages): log groups choosen - - * share/rpmsrate: a hell lot of modifications, mostly cleanup of - DEVELOPEMENT - - chineese packages - - move Aurora's to AURORA (DrakX take care of Aurora) - - * install_steps_gtk.pm (remove_advertising): created - -2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log - -2001/03/08 Pixel <pixel@mandrakesoft.com> - - * verify_c: fix the regexp - - * detect_devices.pm (floppies): load module "floppy" before probing - -2001/03/08 dam's <damien@mandrakesoft.com> - - * netconnect.pm: applied if__ - -2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log - -2001/03/08 Pixel <pixel@mandrakesoft.com> - - * verify_c: fix the regexp - - * share/rpmsrate: add i18n'ed packages - - * detect_devices.pm (floppies): load module "floppy" before probing - -2001/03/08 dam's <damien@mandrakesoft.com> - - * common.pm: added if__ - - * netconnect.pm: applied if__ - -2001/03/08 François Pons <fpons@mandrakesoft.com> - - * diskdrake.pm: avoid using e2fsck, else it abort by checking partition - size (which differs). - fix resize ext2 by using resize2fs. - - * pkgs.pm: changed choice of package for selection. - - * share/list: added resize2fs and dumpe2fs, removed ext2resize which is - replaced. - -2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not - honoured by kernel - -2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - -2001/03/08 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: advertising modifs - (setPackages): use burners instead of IDEburners - - * bootloader.pm: cleanup - - * interactive.pm (ask_from_listf_no_check): catch wizcancel and return - undef - - * fs.pm (write_fstab): change again for 'none' checking the mount point - (write_fstab): special case for device ``none'' (which can be mounted - twice or more :) - - * my_gtk.pm (_create_window): on delete_event, destroy the window and - raise wizcancel - - * share/po/fr.po: fix bad translation - - * share/rpmsrate: add i18n'ed packages - raise kdebase - - * install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs - - * detect_devices.pm: cleanup - (isBurner): use syslog to detect scsi burners - -2001/03/08 Stew Benedict <sbenedict@mandrakesoft.com> - - * install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp - - * partition_table_mac.pm: fixed variable referencing - thx Pixel - -2001/03/08 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad pci number -> string - -2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated - Bulgarian, Catalan and Serbian files - -2001/03/08 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (dev2grub): better error reporting - - * tools/cvslog2changelog.pl (%users): add stew - - * install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix - - * share/rpmsrate: raise kdebase - xcdroast is the best cd burner ui, raise it above others - lower some EDITORS - raise vim-X11 - lower xrn, raise pan - - * install_any.pm (setPackages): use burners instead of IDEburners - (setPackages): at least set BURNER for ide burners - - * any.pm: cleanup - - * install_steps_interactive.pm, install2.pm: re-add miscellaneous step, - but always hidden (aka automatic) - - * detect_devices.pm (isBurner): use syslog to detect scsi burners - - * fs.pm (write_fstab): special case for device ``none'' (which can be - mounted - twice or more :) - - * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions - (without mem=) - -2001/03/08 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad pci number -> string - -2001/03/08 Pixel <pixel@mandrakesoft.com> - - * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions - (without mem=) - -2001/03/07 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected default focus after detection - don't test adsl if net install - -2001/03/07 Pixel <pixel@mandrakesoft.com> - - * modules.pm (add_alias): remove the alias block-major-11 as it's - overriding the - default alias to sr_mod, and is uneeded with scsi_hostadapter being - added - to /etc/modules.conf - - * share/rpmsrate: lower heartbeat - -2001/03/07 sbenedict - - * help.pm: * perl-install/help.pm - typo in yaboot help - - * any.pm: * perl-install/any.pm - fixed two $l vs. @l references - - bootloader menu, need image/boot in rec mode PPC - CVl: - ---------------------------------------------------------------------- - - * devices.pm: * perl-install/devices.pm - add adbmouse - -2001/03/07 dam's <damien@mandrakesoft.com> - - * standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages - -2001/03/07 François Pons <fpons@mandrakesoft.com> - - * install_any.pm, bootloader.pm: fixed support for other kernel for - bootloader entries. - automatically add 2.2 entries for kernel22 (manage hack-kernel too). - - * Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card. - - * pkgs.pm: added support for killing all child process of a transaction, - necessary to be - able to umount cdrom and eject it correctly. - -2001/03/07 Pixel <pixel@mandrakesoft.com> - - * share/fonts.tar.bz2: use gb16fs instead of gb16st - - * modules.pm (add_alias): remove the alias block-major-11 as it's - overriding the - default alias to sr_mod, and is uneeded with scsi_hostadapter being - added - to /etc/modules.conf - - * share/rpmsrate: lower heartbeat - lower Mesa's rate - - * install2.pm (main): save $@ in $err so that it's not modified before - being used - - * share/locales.tar.bz2: remove ending '/' in symlinks not pleasing - packdrake - - * standalone/drakboot: make it please perl2fcalls - -2001/03/07 sbenedict - - * bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force - XF4 for PPC in recommended mode - * perl-install/bootloader.pm - rework get_of_dev to work in live install - - * install_steps_interactive.pm, any.pm, partition_table_mac.pm: * - perl-install/any.pm - change in partition_table_mac'xxx syntax - * perl-install/install_steps_interactive.pm - change in - partition_table_mac'xxx syntax - - * perl-install/partition_table_mac.pm - change in - partition_table_mac'xxx syntax - -2001/03/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/fr.po: Fixed French typos reported by tester - -2001/03/07 Pixel <pixel@mandrakesoft.com> - - * share/fonts.tar.bz2: use gb16fs instead of gb16st - - * fsedit.pm: fix typo - - * install2.pm (main): save $@ in $err so that it's not modified before - being used - - * share/rpmsrate: lower Mesa's rate - - * standalone/drakboot: make it please perl2fcalls - -2001/03/06 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected bad %intf while savung - don't ask configuration if expert - now detecting adsl - - * standalone/draknet: remmoved 'quiting appli' screen - -2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: fix save of automatic stage1 info for static network - - * mdk-stage1/init.c: do not display from syslog msg's from RPM telling - that it - installed/removed some pkg's - - * mdk-stage1/Makefile: fix includes for init - -2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, - share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese - file - -2001/03/06 Pixel <pixel@mandrakesoft.com> - - * perl2fcalls: - - small fix for bootlook.pm - - don't display reused - - * detect_devices.pm (stringlist): if no text description, display ids - - * install_steps_interactive.pm (generateAutoInstFloppy): comment old code - (summary): fixes - (setupSCSI): cleanup - (summary): display sound/tv/isdn cards found - - * fsedit.pm (check_mntpoint): don't allow LVM on / or /boot - (@suggestions_mntpoints): add /boot - - * install_any.pm: hack to make perl2fcalls happy - (getHds): fix for no hd detected in newbie installs - (setPackages): s/snd-slot/sound-slot/ - - * install_steps_auto_install.pm (@graphical_steps): add - beforeInstallPackages so that advertisings are there - - * install2.pm (setupSCSI): remove autoSCSI, cleanup - - * http.pm, ftp.pm: don't use install_any - - * modules.pm: add cciss - - * partition_table.pm (add): create 3 primaries before creating an extended - if DAC960 (/dev/rd/*) - (add): max number of parts for rd, ida and cciss - -2001/03/06 yduret - - * bootlook.pm: pixelisation - -2001/03/06 dam's <damien@mandrakesoft.com> - - * install2.pm: corrected bad file search - corrected intf setting - - * standalone/draknet: added enable/disable networking button. - - * standalone/drakxconf: updated to be launched frome DrakConf if no - DISPLAY - - * netconnect.pm: now detecting adsl - typo - better load_conf - - * Xconfigurator.pm: cleaned png displaying - - * common.pm: setinhash -> set_in_hash - added setinhash - - * fs.pm: typo - use set_in_hash - -2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic - mode - - * mdk-stage1/Makefile: fix includes for init - -2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: corrected some typos, Updated Japanese file - updated Lithuanian file - - * help.pm, standalone/draknet: corrected some typos, Updated Japanese file - -2001/03/06 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to - any::runlevel - - * partition_table.pm (add): max number of parts for rd, ida and cciss - - * fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash - - * diskdrake.pm (Create): pixelization - - * fsedit.pm (hds): pixelization - - * install_steps_auto_install.pm (@graphical_steps): add - beforeInstallPackages so that advertisings are there - - * modules.pm: add cciss - - * install2.pm (main): remove unloading vfat (not needed anymore with - mdk-stage1) - -2001/03/05 dam's <damien@mandrakesoft.com> - - * netconnect.pm: $mouse->{device} is set if it doesn't exists. - - * Makefile: added pixmaps copying - -2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * netconnect.pm, bootlook.pm, help.pm: fixed English typos - -2001/03/05 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (generateAutoInstFloppy): use - generate_automatic_stage1_params - - * c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK - - * install_any.pm (generate_automatic_stage1_params): replace - generate_ks_cfg - -2001/03/05 dam's <damien@mandrakesoft.com> - - * Makefile: added pixmaps copying - - * standalone/draknet: required gtk only if needed, added redirection to - newt if needed - - * netconnect.pm: $mouse->{device} is set if it doesn't exists. - corrected short circuit if network install - corrected bad end message, - added copying of resolv.conf & modules.conf - - * install2.pm: moved askrootpasswd and adduser before network conf - - * network.pm: removed old NS0 fetching. /etc/resolv.conf is read in - install2.pm now - removed setdefaultroute and sethostname - -2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: Updated Latvian, Belarussian and Spanish files - -2001/03/05 Pixel <pixel@mandrakesoft.com> - - * lvm.pm (lv_create): fix typo - - * bootloader.pm: add use devices - (install_grub): ensure the translated messages are not too big the hard - way - - * install_any.pm (generate_automatic_stage1_params): replace - generate_ks_cfg - (install_urpmi): have "use hdlist ..." in any case - - * my_gtk.pm: XSetInputFocus now done in perl-GTK - (_create_window): don't care about c::XSetInputFocus not existing - - * any.pm (setupBootloader): pixelization - (setupBootloader): fix call to get_append - - * interactive.pm (vnew): cleanup - - * common.pm (salt): cleanup - - * install_steps_interactive.pm (generateAutoInstFloppy): use - generate_automatic_stage1_params - - * c/stuff.xs.pm: XSetInputFocus now done in perl-GTK - - * c/Makefile.PL: compile fix - - * diskdrake.pm (create_buttons4partitions_): fix for displaying LVM - - * Xconfigurator.pm (xtest): use external xtest if standalone - - * install2.pm (main): remove unloading vfat (not needed anymore with - mdk-stage1) - -2001/03/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - diskdrake.pm, share/po/af.po: updated po files - -2001/03/04 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work - - * share/rpmsrate: - - remove autologin - - move X11R6-contrib to DEVELOPEMENT and lower rate - -2001/03/04 stew <sbenedict@mandrakesoft.com> - - * any.pm - changes to enable yaboot configuration for PPC - - * diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap - - * install_steps_interactive.pm - auto-add Apple Bootstrap - PPC - -2001/03/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake, - install_interactive.pm, install2.pm: small fixes for LVM - - * diskdrake.pm: don't default the LVM name to 'pp' ;pp - small fixes for LVM - -2001/03/03 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: small fixes for LVM - (doPartitionDisksAfter): small adaptation for LVMs - use run_or_die - - * fsedit.pm: small fixes for LVM - (hds): detect LVMs and return them - (add): handling of LVMs - (@partitions_signatures): add new magic of reiserfs - - * bootloader.pm: use run_or_die - - * run_program.pm (run_or_die, rooted_or_die): created - - * install_steps_interactive.pm: cleanup - - * install_any.pm (getHds): handle LVMs. $o->{lvms} contain them - (setPackages): ask for installation of package lvm when needed - (suggest_mount_points, find_root_parts): take $fstab as arg instead of - $hds - - * install2.pm: small fixes for LVM - (formatPartitions): call vgscan if needed when / is mounted - - * devices.pm (make): better caller in error - - * share/list: add progs for LVM handling - - * install_interactive.pm: small fixes for LVM - - * diskdrake.pm: small fixes for LVM - - addition of drive to notebook cleaned - - various clean-up - - handling of LVMs - - * standalone/diskdrake: small fixes for LVM - small adaptation - - * lvm.pm: small fixes for LVM - creation - - * partition_table.pm: add isLVMBased - -2001/03/02 stew <sbenedict@mandrakesoft.com> - - * commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC - - * install_steps.pm - no bootfloppy, added yaboot.conf - PPC - - * install_interactive.pm - pdisk vs. fdisk - PPC - - * bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz - -2001/03/02 stew <sbenedict@mandrakesoft.com> - - * c/smp.c -stanza for PPC - - * detect_devices.pm - added code for MO devices - - * help.pm - help information for yaboot - PPC - - * partition_table.pm - PPC mods - - * partition_table_mac.pm - PPC mods - - * modules.pm - PPC mods - parallel port not used - - * diskdrake.pm - PPC mods - display like pdisk - - * install2.pm - PPC mod - no bootdisk - - * fs.pm - bootstrap partition - PPC - -2001/02/27 dam's <damien@mandrakesoft.com> - - * standalone/draknet: pop up a dialog to quit X when accepting - configuration - -2001/02/27 Pixel <pixel@mandrakesoft.com> - - * partition_table_raw.pm (@MBR_signatures): add yet another grub signature - - * devices.pm (entry): add fd0H1440 and fd1H1440 - - * bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be - created - -2001/02/26 dam's <damien@mandrakesoft.com> - - * Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm, - pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy - - * Makefile: typo - new pixmap policy - - * bootlook.pm: typo - new pixmap policy - need to be merged with bootloader - - * standalone/draknet: reincluded Gtk + init Gtk - thiskind -> thiskind_backend - new pixmap policy - - * standalone/drakboot: short-circuit to bootlook for the moment. - -2001/02/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, - share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers - script to produce a correct pot file - Updated Estonian and Walloon files - - * bootlook.pm: changed I_() to _() so xgettext cna find the translatable - strings - -2001/02/26 Pixel <pixel@mandrakesoft.com> - - * standalone/drakgw: pixelization - - * install_steps.pm: remove unneeded "use install_interactive" - - * install_steps_gtk.pm (copy_advertising): fix changing for - advertising_images - -2001/02/26 dam's <damien@mandrakesoft.com> - - * netconnect.pm: should correct bad resolv.conf when swithcinf in - standalone embedded mode. Not Certified - fixed standalone edition - corrected wizard mode. - - * Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap - policy - - * standalone/draknet: new pixmap policy - fixed standalone edition - - * bootlook.pm: need to be merged with bootloader - - * interactive_gtk.pm: if wizard, show the button - - * standalone/drakboot: short-circuit to bootlook for the moment. - -2001/02/26 Pixel <pixel@mandrakesoft.com> - - * common.pm (if_): fix for use in scalar context - - * install_steps_interactive.pm (summary): translate mouse description - - * install_steps.pm: remove unneeded "use install_interactive" - - * install_steps_gtk.pm (copy_advertising): fix changing for - advertising_images - -2001/02/26 warly - - * share/compssUsers, share/rpmsrate: remove some packages - -2001/02/26 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm: if wizard, show the button - - * netconnect.pm: corrected wizard mode. - -2001/02/26 Pixel <pixel@mandrakesoft.com> - - * common.pm (if_): fix for use in scalar context - - * install_steps_interactive.pm (summary): translate mouse description - -2001/02/25 dam's <damien@mandrakesoft.com> - - * share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo. - - * netconnect.pm: profile handling. - profile handling - corrected wizard. - - * standalone/draknet: profile handling. - profile handling - - * install_steps_interactive.pm: updated - -2001/02/25 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): move the load_deps before all the loadO's - - * install_any.pm (g_auto_install): have formatMountPartitions graphical if - $graphical - - * install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1" - for replay - - * interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists - center the chosen value - -2001/02/24 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, install2.pm: move writing to config files from - install2::selectKeyboard to install_steps - - * share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in - the CVS since the current cooker version is too recent - - * commands.pm (more): handle 'q' to quit - -2001/02/24 Pixel <pixel@mandrakesoft.com> - - * c/Makefile (stuff): fix the fix's fix :'-( - - * detect_devices.pm (pci_probe): fix to clean the log - - * install_steps_interactive.pm (setRootPassword): NIS server must be - editable - -2001/02/23 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (g_auto_install): handle $replay flag. It means a 'not - fully automated install'. - - * install_steps_auto_install.pm (@graphical_steps): specify which step - should be interactive - - * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed - - * install_steps.pm (afterInstallPackages): no kdm UserView in NIS - (configurePrinter): if_'ization - - * install_steps_interactive.pm (exitInstall): ask wether Replay or - Automated - (generateAutoInstFloppy): handle $replay flag. It means a 'not fully - automated install'. - (summary): nicer mouse name - -2001/02/23 dam's <damien@mandrakesoft.com> - - * network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard - layout, no use gtk in draknet, minor bugfixes - -2001/02/23 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: added accessor the rpmsrate data of packages. - avoid rebuilding the database for oem, rpm db is assumed to be fine. - - * rescue/make_rescue_img: removed kernel_reread program. - - * rescue/tree/etc/oem: removed server from selection. - added mutli CD support to OEM (NFS/DVD transparent) - fixed selection of package now select much more than before. - fixed root partition size set to the minimum. - -2001/02/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/rpmsrate: move xterm to SYSTEM - -2001/02/23 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if - needed - - * install_steps_auto_install.pm (@graphical_steps): specify which step - should be interactive - - * c/stuff.xs.pm: hack for macroporcessing in term.h - use C_DRAKX - - * install_steps.pm (afterInstallPackages): no kdm UserView in NIS - (configurePrinter): if_'ization - - * share/rpmsrate: add packages installed on demand by DrakX. they are - specifically flagged - or flagged 'INSTALL' - - * perl2fcalls: handling of ``package''->import(``what to import'') - - * interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest - - * Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0 - - * install_any.pm (g_auto_install): handle $replay flag. It means a 'not - fully automated install'. - - * c/Makefile.PL: use C_DRAKX - - * pkgs.pm (setSelectedFromCompssList): fix the fix - - * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed - add setting C_DRAKX to 1 by default - - * install_steps_interactive.pm (exitInstall): ask wether Replay or - Automated - (generateAutoInstFloppy): handle $replay flag. It means a 'not fully - automated install'. - (summary): nicer mouse name - -2001/02/23 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_entries_refW): double clicking on list - means 'Ok' - - * pkgs.pm (setSelectedFromCompssList): fix sillyness - -2001/02/22 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corected infinite loop - -2001/02/22 François Pons <fpons@mandrakesoft.com> - - * rescue/tree/etc/oem: minor cleanup to edit partition size more easily. - brand new version written in perl, support repartitionning on the fly of - the - hard disk and resize of already present FAT partition. - - * rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit - more cleaner (added dependancy). - added missing file for rescue to enable new oem install. - -2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/insmod-modutils/include/elf_hppa64.h, - mdk-stage1/insmod-modutils/util/alias.h, - mdk-stage1/insmod-modutils/util/xstrcat.c, - mdk-stage1/insmod-modutils/util/gzfiles.c, - mdk-stage1/insmod-modutils/include/elf_arm.h, - mdk-stage1/insmod-modutils/util/sys_qm.c, - mdk-stage1/insmod-modutils/util/modstat.c, - mdk-stage1/insmod-modutils/obj/obj_sparc.c, - mdk-stage1/insmod-modutils/include/elf_m68k.h, - mdk-stage1/insmod-modutils/Makefile, - mdk-stage1/insmod-modutils/util/xstrdup.c, - mdk-stage1/insmod-modutils/obj/obj_arm.c, - mdk-stage1/insmod-modutils/obj/obj_m68k.c, - mdk-stage1/insmod-modutils/obj/obj_hppa64.c, - mdk-stage1/insmod-modutils/include/elf_sparc64.h, - mdk-stage1/insmod-modutils/util/sys_dm.c, - mdk-stage1/insmod-modutils/include/elf_s390.h, - mdk-stage1/insmod-modutils/obj/obj_s390.c, - mdk-stage1/insmod-modutils/util/xmalloc.c, - mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h, - mdk-stage1/insmod-modutils/util/xftw.c, - mdk-stage1/insmod-modutils/include/elf_i386.h, - mdk-stage1/insmod-modutils/util/sys_gks.c, - mdk-stage1/insmod-modutils/util/snap_shot.c, - mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c, - mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h, - mdk-stage1/insmod-modutils/include/elf_ppc.h, - mdk-stage1/insmod-modutils/obj/obj_reloc.c, - mdk-stage1/insmod-modutils/include/elf_sparc.h, - mdk-stage1/insmod-modutils/util/sys_nim.c, - mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile, - mdk-stage1/insmod-modutils/include/elf_hppa.h, - mdk-stage1/insmod-busybox/insmod.c, - mdk-stage1/insmod-modutils/util/meta_expand.c, - mdk-stage1/insmod-modutils/util/arch64.c, - mdk-stage1/insmod-modutils/obj/obj_load.c, - mdk-stage1/insmod-modutils/obj/obj_hppa.c, - mdk-stage1/insmod-busybox/insmod.h, - mdk-stage1/insmod-modutils/include/elf_ia64.h, - mdk-stage1/insmod-modutils/obj/obj_ia64.c, - mdk-stage1/insmod-modutils/obj/obj_sparc64.c, - mdk-stage1/insmod-modutils/include/elf_mips.h, - mdk-stage1/insmod-modutils/include/module.h, - mdk-stage1/insmod-modutils/obj/obj_mips.c, - mdk-stage1/insmod-modutils/util/sys_cm.c, - mdk-stage1/insmod-modutils/obj/obj_alpha.c, - mdk-stage1/insmod-modutils/include/kerneld.h, - mdk-stage1/insmod-modutils/util/xrealloc.c, - mdk-stage1/insmod-modutils/obj/Makefile, - mdk-stage1/insmod-modutils/insmod-frontend.c, - mdk-stage1/insmod-modutils/obj/obj_common.c, - mdk-stage1/insmod-modutils/include/modstat.h, - mdk-stage1/insmod-modutils/util/Makefile, - mdk-stage1/insmod-modutils/include/config.h, - mdk-stage1/insmod-modutils/util/logger.c, - mdk-stage1/insmod-modutils/obj/obj_kallsyms.c, - mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h, - mdk-stage1/insmod-modutils/util/config.c, - mdk-stage1/insmod-modutils/include/version.h, - mdk-stage1/insmod-modutils/include/kallsyms.h, - mdk-stage1/insmod-modutils/include/elf_alpha.h, - mdk-stage1/insmod-modutils/util/sys_oim.c, - mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's - -2001/02/22 Pixel <pixel@mandrakesoft.com> - - * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but - not - over existing /etc/fstab. Fix some stupid stuff - - * modules.pm, commands.pm: call /usr/bin/insmod_ with full path - - * install2.pm (main): don't set a special $remote_path PATH for - postInstallNonRooted - (otherwise install's modprobe is not used, and you can't "modprobe - vfat", - even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not - found. - - * my_gtk.pm (create_box_with_title): disallow focusing on text if it is - non-scrolled - -2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c, - mdk-stage1/init-libc-headers.h, - mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile, - mdk-stage1/init.c, mdk-stage1/minilibc.h, - mdk-stage1/dietlibc/include/unistd.h, - mdk-stage1/dietlibc/include/sys/socket.h, - mdk-stage1/dietlibc/include/signal.h: have "init" compiled against - dietlibc (rather than glibc) on non-Intel arch's - -2001/02/22 Pixel <pixel@mandrakesoft.com> - - * install_steps_auto_install.pm: $graphical is now a module variable. Can - be changed from everywhere - - * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but - not - over existing /etc/fstab. Fix some stupid stuff - - * modules.pm, commands.pm: call /usr/bin/insmod_ with full path - - * install2.pm (main): don't set a special $remote_path PATH for - postInstallNonRooted - (otherwise install's modprobe is not used, and you can't "modprobe - vfat", - even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not - found. - - * my_gtk.pm (create_box_with_title): disallow focusing on text if it is - non-scrolled - - * interactive.pm (ask_from_entries_refH_powered_normalize): fix setting - type to 'list' in - case of format. should be only set if type is unset - (ask_from_entries_refH_powered_normalize): if list+format then type is - 'list', combo not accepted (hacky?) - - * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't - call create_okcancel - -2001/02/22 Pixel <pixel@mandrakesoft.com> - - * interactive.pm (ask_from_entries_refH_powered_normalize): if list+format - then type is - 'list', combo not accepted (hacky?) - - * install_steps_auto_install.pm: $graphical is now a module variable. Can - be changed from everywhere - - * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't - call create_okcancel - -2001/02/21 dam's <damien@mandrakesoft.com> - - * network.pm, netconnect.pm: netconnect recode, wizard compatible. - network.pm modified for wizard. Still need work for ask_yesorno, - ask_okcancel. +debugging of course - - * standalone/draknet: updated (don't remember what) - -2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/tools.c, mdk-stage1/Makefile, - mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c, - mdk-stage1/minilibc.h, mdk-stage1/minilibc.c, - mdk-stage1/init-libc-headers.h: - - fix "init" on ppc (do not use minilibc on non-i386 arch's) - - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc) - - cleanup of "init" - - * mdk-stage1/init.c: - - fix "init" on ppc (do not use minilibc on non-i386 arch's) - - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc) - - cleanup of "init" - fix up syslog logging stuff - -2001/02/21 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (generateAutoInstFloppy): removed - - * install_any.pm (g_auto_install): use selected_leaves for - default_packages to reduce the - list of packages (aka cleanup auto_inst.cfg) - (g_default_packages): created - - * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy - and g_default_packages calls in - advanced - - * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use - - * pkgs.pm (selected_leaves): created - - * install2.pm (main): do postInstallNonRooted before postInstall (so that - 'modprobe - vfat' can be done in postInstallNonRooted and used in postInstall) - - move the loadO of patch/defcfg after loading modules.dep - - generateAutoInstFloppy is no more a step - - removed use Data::Dumper - -2001/02/21 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * share/rpmsrate: Add iputils to SYSTEM. - -2001/02/21 dam's <damien@mandrakesoft.com> - - * docs/wizard.doc: putain de doc de merde pout petite qui est trop débile - - * interactive.pm, my_gtk.pm: corrected wizard mode. - -2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/TECH-INFOS: sync doc with disk automatic installs - - * mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk - installs - -2001/02/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2001/02/21 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (generateAutoInstFloppy): removed - - * install_any.pm (g_auto_install): use selected_leaves for - default_packages to reduce the - list of packages (aka cleanup auto_inst.cfg) - (g_default_packages): created - - * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy - and g_default_packages calls in - advanced - - * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use - - * pkgs.pm (selected_leaves): created - - * install2.pm (main): do postInstallNonRooted before postInstall (so that - 'modprobe - vfat' can be done in postInstallNonRooted and used in postInstall) - - move the loadO of patch/defcfg after loading modules.dep - - generateAutoInstFloppy is no more a step - - removed use Data::Dumper - -2001/02/20 Pixel <pixel@mandrakesoft.com> - - * printerdrake.pm: fix typo - - * install_steps.pm, install_steps_gtk.pm, install_any.pm: better - advertising support - -2001/02/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP - installs, make use of Content-Length when available, to display - progressbar - -2001/02/20 Pixel <pixel@mandrakesoft.com> - - * Makefile: various - - pcmcia_config.patch now in tools (no more in install which is - removed) - - copy xpm's (until step icons work with png's) - - transform group icons in pngs - - * modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various - - * tools/pcmcia_config.patch: pcmcia_config.patch now here - - * printerdrake.pm: fix typo - - * install_any.pm, install_steps.pm, install_steps_gtk.pm: better - advertising support - -2001/02/20 warly - - * share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate - -2001/02/20 François Pons <fpons@mandrakesoft.com> - - * c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE - env variable to choose rpmrc file for rpmlib used - by DrakX, neccessary for live update from a 7.2 or older. - Check that if something goes wrong with rebuilddb, avoid removing - old rpm-3 db files. - Make sure live_install can start from top directory too. - -2001/02/20 Pixel <pixel@mandrakesoft.com> - - * Makefile: various - - pcmcia_config.patch now in tools (no more in install which is - removed) - - copy xpm's (until step icons work with png's) - - transform group icons in pngs - - * modules.pm, class_discard.pm: various - - * tools/pcmcia_config.patch: pcmcia_config.patch now here - - * my_gtk.pm, Xconfigurator.pm: various - major move. now ask_from_list returns false when canceled (it doesn't - die 'ask_from_list canceled' anymore) - - * interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm, - netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm, - any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list - returns false when canceled (it doesn't die 'ask_from_list canceled' - anymore) - -2001/02/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c: try to print errno's stuff when symlink to - /tmp/stage2 failed - - * mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4 - -2001/02/19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated Estonian file - -2001/02/19 Pixel <pixel@mandrakesoft.com> - - * interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on - cancel - - * my_gtk.pm (create_packtable): don't use attach_raw anymore (was a - sillyme) - -2001/02/18 dam's <damien@mandrakesoft.com> - - * standalone/draknet: typo - make fbastok happy about button placement. - little improvements. - -2001/02/16 dam's <damien@mandrakesoft.com> - - * install_gtk.pm: corrected xpm mask - - * network.pm: wireless eth support corrected. - - * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, - share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm, - share/step-orange-on.xpm, share/step-green-on.xpm, - share/step-red-click.xpm: re added these xpm files against display mask - pb. - -2001/02/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/init.c: better ansi colors - - * mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers - - * mdk-stage1/stdio-frontend.c: display more nicely when there is a long - list to choose from (1, 2 or 4 columns) - -2001/02/15 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc - -2001/02/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/az.po: updated Azeri file - -2001/02/15 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): fix i_images - - * fsedit.pm (suggestions_mntpoint): fix - -2001/02/15 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): fix i_images - (installPackages): traktolpilization and advertising - - * Makefile (get_needed_files): copy png files instead of xpm's - - * fsedit.pm (suggestions_mntpoint): fix - - * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup - - * share/list: add GdkImlib stuff - - * perl2fcalls: add Gtk::Gdk::ImlibImage - - * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share - if it exists - -2001/02/15 dam's <damien@mandrakesoft.com> - - * my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm, - install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to - test the faces2xpm stuff. - - * share/step-orange-click.xpm, share/rpm-selected.xpm, - share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm, - share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm, - share/step-red-click.xpm, share/step-green-on.xpm, - share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm, - share/reload.xpm, share/rpm-semiselected.xpm, - share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm, - share/step-red-on.xpm: removed, png are used instead. - - * standalone/draknet: updated internet and added eth conf - - * share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead. - added png images - - * share/step-red.png, share/step-orange.png, share/reload.png, - share/logo-mandrake.png, share/rpm-semiselected.png, - share/logo-mandrake-Desktop.png, share/rpm-installed.png, - share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png, - share/rpm-selected.png, share/step-orange-click.png, - share/step-green-click.png, share/step-green.png, share/rpm-base.png, - share/logo-mandrake2.png, share/ftin.png, share/help.png, - share/step-orange-on.png, share/step-green-on.png, share/ftout.png, - share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc, - share/rpm-unselected.png: added png images - -2001/02/15 Pixel <pixel@mandrakesoft.com> - - * Makefile (get_needed_files): copy png files instead of xpm's - - * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share - if it exists - (selectKeyboard): give clicked as parameter - - * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup - - * fsedit.pm (suggestions_mntpoint): fix typo - - * share/list: add GdkImlib stuff - - * perl2fcalls: add Gtk::Gdk::ImlibImage - - * install_steps_interactive.pm (summary): better message for i18n - - * install_steps_gtk.pm (installPackages): traktolpilization and - advertising - -2001/02/14 dam's <damien@mandrakesoft.com> - - * network.pm, standalone/draknet: wireless updated - - * share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin - theme :) - -2001/02/14 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (afterInstallPackages): add user in group usb - -2001/02/14 dam's <damien@mandrakesoft.com> - - * share/themes-mdk.rc: valentin theme :) - added drawing theme section - - * network.pm: wireless updated - updated wireless eth support - - * standalone/draknet: wireless updated - - * share/help.xpm, share/logo-mandrake.xpm: valentin theme :) - -2001/02/13 dam's <damien@mandrakesoft.com> - - * netconnect.pm: network con initiated in draknet. - netconnect improvement. - typo - - * network.pm: typo - corrected domainname setting - - * standalone/draknet: network con initiated in draknet. - netconnect improvement. - -2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/frontend.h, mdk-stage1/network.h, - mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c, - mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c, - mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff - - * mdk-stage1/modules.c: ask for modules parameters everytime in expert - mode, to avoid wrong autodetections in certain cases - - better log of nfs mount errors - - don't insmod modules already present (important for bzip2 slowness) - - * mdk-stage1/cdrom.c: better error msg thx to mcdtg - - * mdk-stage1/mount.c, mdk-stage1/nfsmount.c: - - better log of nfs mount errors - - don't insmod modules already present (important for bzip2 slowness) - - * mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue - better console messages at startup - -2001/02/13 dam's <damien@mandrakesoft.com> - - * standalone/draknet: profile handling updated - - * network.pm: typo - corrected domainname setting - - * netconnect.pm: finished load_conf - -2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/make_rescue_img, rescue/list: include libs for hostname resolving - - * mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at - startup - - * mdk-stage1/tools.c: - - save /etc/resolv.conf for rescue - -2001/02/13 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectKeyboard): can be automatic only in - non-expert - - * any.pm: md5 now done via crypt - - * install_steps.pm (exitInstall): catch exception of output report.bug - (for gc) - -2001/02/13 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectKeyboard): can be automatic only in - non-expert - - * tools/cvslog2changelog.pl: fix for gc & fpons - fix for fredl broken CVS - - * any.pm: md5 now done via crypt - - * install_steps.pm (exitInstall): catch exception of output report.bug - (for gc) - -2001/02/13 dam's <damien@mandrakesoft.com> - - * network.pm: experimental wireless eth support. Not tested - -2001/02/13 Pixel <pixel@mandrakesoft.com> - - * tools/cvslog2changelog.pl: fix for gc & fpons - fix for fredl broken CVS - - * c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can - be done via crypt of glibc, so remove all this - -2001/02/13 dam's <damien@mandrakesoft.com> - - * any.pm: merging difference - - * netconnect.pm: corrected profile handling - - * network.pm: experimental wireless eth support. Not tested - -2001/02/12 Pixel <pixel@mandrakesoft.com> - - * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added - docs, rescue, tools) - -2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/probing.c: do not close un unbound socket!! - - * c/stuff.xs.pm: close socket everytime in hasNetDevice - - * mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future - potential confusions - - * modules.pm: re include some network modules - -2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * rescue/list: fix vi trouble - - add lspci, lspcidrake, vim-minimal - - better /etc/issue - - better PS1 - - write embryonic tool (installation of detected drivers according to - pci cards) - - * rescue/aliases, rescue/tree/etc/issue: fix vi trouble - - * rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: - - add lspci, lspcidrake, vim-minimal - - better /etc/issue - - better PS1 - - write embryonic tool (installation of detected drivers according to - pci cards) - -2001/02/12 Pixel <pixel@mandrakesoft.com> - - * rescue/drvinst: pixelization - - * docs/README: fix doc about Mandrake/base/compss - - * install_steps_gtk.pm (choosePackagesTree): non first choice packages are - in "Other". - - * install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate - partitions choice modified. diskdrake in expert asks what kind - of auto_allocation is wanted, others choose 'simple' in - %fsedit::suggestions - - * install2.pm: auto_allocate partitions choice modified. diskdrake in - expert asks what kind - of auto_allocation is wanted, others choose 'simple' in - %fsedit::suggestions - (main): gc has done it again! /tmp/conf.modules is now - /etc/modules.conf, - so load both to keep compatibility. - - * my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list) - - * interactive_gtk.pm (ask_from_entries_refW): use - $common->{advanced_label} - (create_ctree): add keyboard shortcuts - (create_clist): moveto only if row_is_visible - - * interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label - defaults to - _("Advanced") - - * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added - docs, rescue, tools) - - * install_steps_interactive.pm (configurePrinter): cleanup, - pkg_install_if_requires_satisfied('xpp', - 'kups') only if a printer is configured (for the case when _("Would you - like to configure a printer?") is answered no) - - * rescue/tree/etc/rc.sysinit: add floppy module for 2.4 - -2001/02/10 Pixel <pixel@mandrakesoft.com> - - * standalone/draknet, standalone/XFdrake: corrected pkgs_install given - - * install_any.pm: add preConfigureTimezone - add step summary. remove steps configureTimezone and configurePrinter - - * install_interactive.pm: cleanup - - * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: - - lang2keyboards handle keyboard percentages - - xmodmaps now named keyboards - - * install_steps_interactive.pm: add step summary. remove steps - configureTimezone and configurePrinter, modify selectKeyboard - - * install2.pm, timezone.pm, install_steps.pm: add step summary. remove - steps configureTimezone and configurePrinter - - * netconnect.pm: corrected back $install call - -2001/02/10 Pixel <pixel@mandrakesoft.com> - - * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: - - lang2keyboards handle keyboard percentages - - xmodmaps now named keyboards - - * install_steps_interactive.pm: add step summary. remove steps - configureTimezone and configurePrinter, modify selectKeyboard - - * standalone/draknet, standalone/XFdrake: corrected pkgs_install given - - * install_any.pm: add preConfigureTimezone - add step summary. remove steps configureTimezone and configurePrinter - - * install2.pm, timezone.pm, install_steps.pm: add step summary. remove - steps configureTimezone and configurePrinter - - * install_interactive.pm: cleanup - - * netconnect.pm: corrected back $install call - -2001/02/09 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, install_steps_interactive.pm, install2.pm, - timezone.pm: configureTimezone doesn't take parameter - /etc/sysconfig/clock - -2001/02/09 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button - handling, quite weird behaviour though cuz of newt sillyness - - * install2.pm: configureTimezone doesn't take parameter - /etc/sysconfig/clock - (main): have compatibility with old stage1 (rhimage -> image) - (formatPartitions): - s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans| - as it should now be (see lang.pm 1.143) - - * install_steps.pm, install_steps_interactive.pm, timezone.pm: - configureTimezone doesn't take parameter /etc/sysconfig/clock - -2001/02/09 siegel - - * share/po/de.po: new german version - -2001/02/08 dam's <damien@mandrakesoft.com> - - * standalone/drakgw: implemented or updated embedded mode - added embedded and (ugly) wizard mode. - - * standalone/printerdrake, standalone/mousedrake, standalone/diskdrake, - standalone/keyboarddrake: implemented or updated embedded mode - - * standalone/draknet: implemented or updated embedded mode - added embedded mode - - * standalone/XFdrake: implemented or updated embedded mode - corrected compilation bug. - - * standalone/drakboot: implemented or updated embedded mode - updated embedded mode. Should work, not tested in real world - - * netconnect.pm: removed testing wizard instruction - -2001/02/08 François Pons <fpons@mandrakesoft.com> - - * ftp.pm: fixed wrong URLPREFIX formation if no user given. - - * standalone/XFdrake: fix the previous changelog wich was wrong (bad - spelling), - added a char in comment to allow a new release (thanks to pixel :-) - make sure SHARE_PATH is set. - fixed SHARE_PATH to make sure it is setted. - - * Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer - XF3 for SiS card. - - * pkgs.pm: fixed problem for updating hdlist after going back to partition - step. - -2001/02/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c: - better memory detection (from wonderful drakx) - -2001/02/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated Norwegian file - -2001/02/08 Pixel <pixel@mandrakesoft.com> - - * common.pm (availableRamMB): cleanup - - * standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in - standalone - -2001/02/07 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed unknown package ARRAY... and locales selection - according to langs. - - * modules.pm: fixed module name without text for SCSI configuration - dialog, add log. - -2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h, - mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c, - mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c, - mdk-stage1/network.c: - - use description of network cards when you have to select between - interfaces; has accuracy even in the case of multiple interface for a - given kernel module - - write down a small "shell" to change parameters on the fly (needs - compile option SPAWN_INTERACTIVE) - -2001/02/07 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): better fix for getting - max install size. - (choosePackages): call setSelectedFromCompssList with empty - compssUsersChoice meaning max - - * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB - -2001/02/07 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixed unknown package ARRAY... and locales selection - according to langs. - -2001/02/07 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): better fix for getting - max install size. - (choosePackages): call setSelectedFromCompssList with empty - compssUsersChoice meaning max - - * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB - -2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show - 8.0 - - * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave - hostname+domain - -2001/02/07 Pixel <pixel@mandrakesoft.com> - - * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( - - * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) - - * install_steps_interactive.pm (miscellaneous): remove asking about - numlock and hd optimizations, - deprecates it (aka don't do anything) - - * Xconfigurator.pm (main): don't need isLaptop anymore, use - detect_devices::hasPCMCIA - - * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default - value of memsize - if given - (install): save CLEAN_TMP in sysconfig/system - (get_append, add_append): get or set an append value - (has_profiles, set_profiles): get or add an entry office for profiles, - also add prof=Home in - the default entry - - * any.pm (setupBootloader): take care of profiles and memsize - (facesnames): only display icons capitalized. This goes along the new - mandrake_desk where capitalized named faces are the new one. [a-z].* - icons - being only kept for compatibility. (in case no capitalized icons - available - display everything (compatibility with old mandrake_desk) - - * standalone/draknet, standalone/XFdrake: don't pass isLaptop - - * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove - taking care of - profiles and memsize. Now in any & bootloader - (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in - $o->{miscellaneous} anymore - - * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm - - * netconnect.pm: remove the $isLaptop unused from a hell lot of functions - - * install2.pm (@installSteps): remove miscellaneous - (main): don't remove pcmcia modules anymore (not there anymore), remove - /sbin/stage1 - -2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show - 8.0 - - * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave - hostname+domain - -2001/02/07 Pixel <pixel@mandrakesoft.com> - - * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( - - * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) - - * install_steps_interactive.pm (miscellaneous): remove asking about - numlock and hd optimizations, - deprecates it (aka don't do anything) - - * Xconfigurator.pm (main): don't need isLaptop anymore, use - detect_devices::hasPCMCIA - - * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default - value of memsize - if given - (install): save CLEAN_TMP in sysconfig/system - (get_append, add_append): get or set an append value - (has_profiles, set_profiles): get or add an entry office for profiles, - also add prof=Home in - the default entry - - * any.pm (setupBootloader): take care of profiles and memsize - (facesnames): only display icons capitalized. This goes along the new - mandrake_desk where capitalized named faces are the new one. [a-z].* - icons - being only kept for compatibility. (in case no capitalized icons - available - display everything (compatibility with old mandrake_desk) - - * standalone/draknet, standalone/XFdrake: don't pass isLaptop - - * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove - taking care of - profiles and memsize. Now in any & bootloader - (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in - $o->{miscellaneous} anymore - - * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm - - * netconnect.pm: remove the $isLaptop unused from a hell lot of functions - - * install2.pm (@installSteps): remove miscellaneous - (main): don't remove pcmcia modules anymore (not there anymore), remove - /sbin/stage1 - -2001/02/07 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * share/rpmsrate: Add usbd to SYSTEM. - -2001/02/07 dam's <damien@mandrakesoft.com> - - * netconnect.pm: updated wizard mode, intro and other stuff - - * interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode - - * share/logo-mandrake.xpm: new logo - -2001/02/07 François Pons <fpons@mandrakesoft.com> - - * http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too) - caused by forked DrakX - with latent ftp connection. - -2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show - 8.0 - - * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave - hostname+domain - -2001/02/07 Pixel <pixel@mandrakesoft.com> - - * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( - - * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) - - * install_steps_interactive.pm (miscellaneous): remove asking about - numlock and hd optimizations, - deprecates it (aka don't do anything) - - * Xconfigurator.pm (main): don't need isLaptop anymore, use - detect_devices::hasPCMCIA - - * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default - value of memsize - if given - (install): save CLEAN_TMP in sysconfig/system - (get_append, add_append): get or set an append value - (has_profiles, set_profiles): get or add an entry office for profiles, - also add prof=Home in - the default entry - - * any.pm (setupBootloader): take care of profiles and memsize - (facesnames): only display icons capitalized. This goes along the new - mandrake_desk where capitalized named faces are the new one. [a-z].* - icons - being only kept for compatibility. (in case no capitalized icons - available - display everything (compatibility with old mandrake_desk) - - * standalone/draknet, standalone/XFdrake: don't pass isLaptop - - * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove - taking care of - profiles and memsize. Now in any & bootloader - (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in - $o->{miscellaneous} anymore - - * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm - - * netconnect.pm: remove the $isLaptop unused from a hell lot of functions - - * install2.pm (@installSteps): remove miscellaneous - (main): don't remove pcmcia modules anymore (not there anymore), remove - /sbin/stage1 - -2001/02/07 siegel - - * share/po/de.po: new german version - -2001/02/06 François Pons <fpons@mandrakesoft.com> - - * ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid - opening - and closing connection too fast for each transaction). There seems - to be some problem for retrieving twice a package, this cause huge pause - between each transaction, the best is to avoid them so ? - -2001/02/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c, - mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c, - mdk-stage1/modules.c, mdk-stage1/disk.c: - - slighty change the message when exiting successfully from install, - to not mess with abnormal termination - - get back dialog for hostname and domain in case of unable to guess - domain - - try to resolve DNS if self-ip can't resolve, to guess domain - - remember entries so that when there is a problem you don't have to - re-enter everything (ncurses sucking stuff in case of stdio-frontend..) - - use larger buffer for list_directory since in /dev there can be - *many* files - -2001/02/05 dam's <damien@mandrakesoft.com> - - * Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles. - - * standalone/draknet: added infos recovering. - - * netconnect.pm: added load_conf() to recover saved infos from conffile. - -2001/02/05 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: removed abusive white char. - updated to use urpmi new format (change fakemedium to better label) - fixed frame buffer usage if not enabled (installation of Aurora) - clean up and remove unused code. - - * ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore. - - * pkgs.pm: updated to use urpmi new format (change fakemedium to better - label) - - * Xconfigurator.pm: Removed Device3Dfx as it is no more. - - * install_steps.pm: fixed frame buffer usage if not enabled (installation - of Aurora) - clean up and remove unused code. - -2001/02/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/list: updated list of gconv modules - -2001/02/05 Pixel <pixel@mandrakesoft.com> - - * commands.pm (head_tail): fix usage - - * interactive_gtk.pm (create_ctree): node_moveto done only if - node_is_visible is not full - -2001/02/04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with - file-not-found in args - -2001/02/04 Pixel <pixel@mandrakesoft.com> - - * interactive_newt.pm: fix adaptation to the terminal size, should now - work in 80x25 - - * Xconfigurator.pm (monitorConfiguration): better handling of auto_install - - * install_steps_interactive.pm (choosePackages): don't call - chooseSizeToInstall even with experts - - * install_steps_gtk.pm (charsetChanged): re-create steps window - -2001/02/03 dam's <damien@mandrakesoft.com> - - * modules.pm, standalone/draknet, netconnect.pm: corrected module.conf - update, net conf saving, and no wizard by default. - -2001/02/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2001/02/03 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in - auto_installs - - * install_steps_gtk.pm (charsetChanged): created, takes care of setting to - the right charset the windows - - * install_steps_interactive.pm (selectLanguage): call charsetChanged - - * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"'' - move ftp to SYSTEM so that it is installed - - * Makefile: install cardmgr - - * modules.pm (configure_pcmcia): cleanup - -2001/02/03 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in - auto_installs - - * install_steps_gtk.pm (charsetChanged): created, takes care of setting to - the right charset the windows - - * install_steps_interactive.pm (selectLanguage): call charsetChanged - - * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"'' - move ftp to SYSTEM so that it is installed - - * Makefile: install cardmgr - - * modules.pm (configure_pcmcia): cleanup - -2001/02/02 dam's <damien@mandrakesoft.com> - - * share/wizard.rc: added rc file for wizard mode - -2001/02/02 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (monitorConfiguration): better default for DDC probe - fails and - auto_install and not provided any info about the monitor - - * my_gtk.pm (gtkcreate_xpm): error handling with error message - - * share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP - - * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in - /etc/sysconfig/i18n - - * mdk-stage1/disk.c (try_with_device): bloody guillaume changed - /tmp/hdimage to /tmp/disk without even - telling, changing it back as i don't see any good reason for the move. - - * install_any.pm (setPackages): in auto_installs, default to all groups - chosen, unless - compssUsersChoice exist. Won't change anything unless compssListLevel is - used of course - - * Xconfigurator_consts.pm: add low_default_monitor for default of - auto_installs - - * interactive_gtk.pm (ask_from_entries_refW): use gtkxpm - - * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm, - diskdrake.pm: using the new formatXiB - - * detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to - the fact that kernel - 2.4 uses /proc/driver/array instead of /proc/array. Also adapted the - regexp now that ida/c0d0p? is no more at the beginning of the line. - (get): cleanup, remove hasIDE hasSCSI... - - * common.pm (formatXiB): created, format a number in human readable format - -2001/02/02 Pixel <pixel@mandrakesoft.com> - - * mdk-stage1/disk.c (try_with_device): bloody guillaume changed - /tmp/hdimage to /tmp/disk without even - telling, changing it back as i don't see any good reason for the move. - -2001/02/02 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm, - standalone/diskdrake: recoded wizard mode - corrected some stuff. - trying not to break draknet for cooker snapshot - -2001/02/02 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (monitorConfiguration): better default for DDC probe - fails and - auto_install and not provided any info about the monitor - - * install_any.pm (setPackages): in auto_installs, default to all groups - chosen, unless - compssUsersChoice exist. Won't change anything unless compssListLevel is - used of course - - * share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i - chose was glibc-2.1 :-( - this one en_US and seems all right! - - * Xconfigurator_consts.pm: add low_default_monitor for default of - auto_installs - - * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm, - diskdrake.pm: using the new formatXiB - - * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in - /etc/sysconfig/i18n - - * common.pm (formatXiB): created, format a number in human readable format - - * mdk-stage1/disk.c (try_with_device): bloody guillaume changed - /tmp/hdimage to /tmp/disk without even - telling, changing it back as i don't see any good reason for the move. - -2001/02/01 dam's <damien@mandrakesoft.com> - - * standalone/draknet: new draknet snapshot. Still unuseable - - * interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in - install. - -2001/01/31 dam's <damien@mandrakesoft.com> - - * standalone/draknet: corected translation and conflict. - -2001/01/31 François Pons <fpons@mandrakesoft.com> - - * modules.pm: added missing die if modprobe failed on live upgrade. - - * pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm - file - if everything has been successfull. - - * install_steps.pm: changed to clean selection for non expert as used for - group selection - because it is not cleaned, need better solution TODO. - -2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - - * standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES - BEFORE COLON (:); - and it is "Profile" and not "Profil") - CV: - ---------------------------------------------------------------------- - -2001/01/31 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackagesTree): created, simple - ask_many_from_list to choose - individual packages - (choosePackages): log for debug - (choosePackages): don't ask to install in beginner. Max is chosen - (setRootPassword): help not based on installClass being server or not - (selectInstallClass): remove installClass choice (was - normal/devel/server) - (chooseGroups): fix for individual package selection flag - - * netconnect.pm (get_net_device): more cleanup syntax - (get_net_device): cleanup syntax - - * install_steps.pm (selectLanguage): warning for debug - (miscellaneousBefore): don't use installClass to decide to use - supermount - or not. Choice is done on $::corporate. Can't say "no supermount in - server - installs" anymore - (selectInstallClass): emptied - (setupSCSI): don't configure PCMCIA if there is no PCMCIA - - * install_any.pm (g_auto_install): installClass removed - (setPackages): do not preselect compssUsers entries - - * install2.pm (main): don't set installClass=normal meta_class desktop - (deprecated) - (miscellaneous): TYPE= removed (was installClass) - (selectInstallClass): don't set $o->{partitions}. diskdrake will have to - ask in a set of possibilities - ($o): replace fclass by fbeginner and fexpert - ($o): default security level to 2 since it can't be based on - installClass (deprecated) - - * install_steps_gtk.pm: restore window size for time being - - * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate - - * Xconfigurator.pm (main): better error message for auto_install failing - - * interactive.pm (ask_many_from_list): fix sorting - - * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by - drakx. Still - need finding the guilty - -2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: more kbd corrections - fixed soem keybopard values - -2001/01/31 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackagesTree): created, simple - ask_many_from_list to choose - individual packages - (choosePackages): log for debug - (choosePackages): don't ask to install in beginner. Max is chosen - (setRootPassword): help not based on installClass being server or not - (selectInstallClass): remove installClass choice (was - normal/devel/server) - (chooseGroups): fix for individual package selection flag - - * install_steps.pm (selectLanguage): warning for debug - (miscellaneousBefore): don't use installClass to decide to use - supermount - or not. Choice is done on $::corporate. Can't say "no supermount in - server - installs" anymore - (selectInstallClass): emptied - (setupSCSI): don't configure PCMCIA if there is no PCMCIA - - * install_any.pm (g_auto_install): installClass removed - (setPackages): do not preselect compssUsers entries - - * install2.pm (main): don't set installClass=normal meta_class desktop - (deprecated) - (miscellaneous): TYPE= removed (was installClass) - (selectInstallClass): don't set $o->{partitions}. diskdrake will have to - ask in a set of possibilities - ($o): replace fclass by fbeginner and fexpert - ($o): default security level to 2 since it can't be based on - installClass (deprecated) - - * install_steps_gtk.pm: restore window size for time being - - * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate - - * Xconfigurator.pm (main): better error message for auto_install failing - - * interactive.pm (ask_many_from_list): fix sorting - - * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by - drakx. Still - need finding the guilty - -2001/01/30 dam's <damien@mandrakesoft.com> - - * standalone/draknet: new draknet. unstable - - * netconnect.pm: updated - debugged network card configuration after pixelisation. - -2001/01/30 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from - trying to set progressbar to more than 100% (rescue is more compressed - than drakx) - - * share/rpmsrate: add ldetect to config stuff I want to have on all - installs (lspcidrake) - -2001/01/30 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm, netconnect.pm, install_interactive.pm: - adapt format functions given to ask_from_listf. $_ is no more set - - * mouse.pm (detect): replace commands::modprobe by modules::load as it - should (or??) - - * perl2etags: adapt to new etags (emacs 21) format - - * raid.pm (make): replace commands::modprobe by modules::load as it should - (or??) - - * perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his - regexps - - * share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number - separator instead of ".". - The sheer result is: - "0.6" * 10 gives 0 - "0,6" * 10 gives 6 - - So i have overwritten misc/LC_NUMERIC with - /usr/share/locale/en/LC_NUMERIC and - it works nicely now :) - -2001/01/29 dam's <damien@mandrakesoft.com> - - * standalone/drakboot: corrected typo - -2001/01/29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: - - deprecate "hdreiser.img" since we have room for "reiserfs.o" in - "hd.img" - - following deprecation of "other.img", reintegrate big modules in - relevant boot disks - -2001/01/29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, share/po/et.po: updated Estonian file - -2001/01/29 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain - more than one ida/c0d0p* - -2001/01/28 dam's <damien@mandrakesoft.com> - - * share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated - -2001/01/28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible - bug causing reiserfs partitions - not to be displayed/asked for formatting. The default value being used. - - * any.pm (get_autologin): adapt to new format of sysconfig/desktop - -2001/01/28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible - bug causing reiserfs partitions - not to be displayed/asked for formatting. The default value being used. - - * any.pm (get_autologin): adapt to new format of sysconfig/desktop - -2001/01/28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible - bug causing reiserfs partitions - not to be displayed/asked for formatting. The default value being used. - - * any.pm (get_autologin): adapt to new format of sysconfig/desktop - -2001/01/28 siegel - - * share/po/de.po: new german version - -2001/01/26 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm: updated embedded mode - - * standalone/drakboot: added embedded mode - -2001/01/26 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile - bzlib - - * mdk-stage1/stage1.c: restore passing of pcmcia info to stage2 - - * mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c, - mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c, - mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c, - mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile, - mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c, - mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: - - use bzlib instead of zlib to reduce overall size - - take home my own bzlib code to (1) reduce code size with good - compile options (2) make it compile and link against dietlibc - - * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h, - mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h, - mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib - - * mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format - -2001/01/26 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): prepare for advertising... - - * interactive_newt.pm (ask_from_entries_refW): major rework for new - format, still need work - (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of - NEWT_FLAG_HIDDEN - (myTextbox): wrap the text if needed - (myTextbox): use a vertical scrollbar if needed - - * Newt/Newt.xs (newtFormAddGrid): new name for - newtGridAddComponentsToForm, swap - parameters for much better understanding - (newtListboxGetCurrent): returns a SV (together with - newtListboxAddEntry) - (newtListboxAddEntry): data is now a SV - -2001/01/26 siegel - - * share/po/de.po: . - -2001/01/26 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): prepare for advertising... - - * interactive_newt.pm (ask_from_entries_refW): major rework for new - format, still need work - (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of - NEWT_FLAG_HIDDEN - (myTextbox): wrap the text if needed - (myTextbox): use a vertical scrollbar if needed - - * Newt/Newt.xs (newtFormAddGrid): new name for - newtGridAddComponentsToForm, swap - parameters for much better understanding - (newtListboxGetCurrent): returns a SV (together with - newtListboxAddEntry) - (newtListboxAddEntry): data is now a SV - -2001/01/26 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (installPackages): prepare for advertising... - - * interactive_newt.pm (ask_from_entries_refW): major rework for new - format, still need work - (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of - NEWT_FLAG_HIDDEN - (myTextbox): wrap the text if needed - (myTextbox): use a vertical scrollbar if needed - - * Newt/Newt.xs (newtFormAddGrid): new name for - newtGridAddComponentsToForm, swap - parameters for much better understanding - (newtListboxGetCurrent): returns a SV (together with - newtListboxAddEntry) - (newtListboxAddEntry): data is now a SV - -2001/01/25 dam's <damien@mandrakesoft.com> - - * install2.pm: disable steps 'packages choice', 'configure X', and - 'configure' 'printer' - - * install_steps_interactive.pm: don't oblige user addition - - * network.pm: display ethernet module - - * netconnect.pm: network informations filled into - $prefix/var/lib/naat/configuration - -2001/01/25 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh -> - /usr/bin/sh for stage2 - - * mdk-stage1/probing.h: better tightness of probing stuff - - * mdk-stage1/probing.c: better tightness of probing stuff - print warning message when insmod of PCI-detected device fails - - * mdk-stage1/stage1.c: - - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives - - remove fat/vfat modules from some boot floppies now that we don't - need it anymore - - * mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of - tulip network cards, kernel-2.4 has strange way to classify some of its - net modules.. - -2001/01/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/it.po: Waw, italian translator is very fast :) - updated Indonesian and Italian fiels - - * share/po/id.po: updated Indonesian and Italian fiels - - * share/locales.tar.bz2: added iso9 locale definitions - - * lang.pm: fixed LANGUAGE for mk locale - -2001/01/25 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (spawnShell): fix error message - -2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1-data/stage1.tar.bz2: - - clean up deprecated symlinks (insmod, rmmod, cardmgr) - - remove unecessary device files - - * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, - mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, - mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, - mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, - mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, - mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, - mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, - mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, - mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, - mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, - mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, - mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia - -2001/01/24 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun - - * install_steps.pm (afterInstallPackages): cleanup - - * interactive.pm: better documentation of ask_from_entries_refH features - (entry) - -2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1-data/stage1.tar.bz2: - - clean up deprecated symlinks (insmod, rmmod, cardmgr) - - remove unecessary device files - - * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, - mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, - mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, - mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, - mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, - mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, - mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, - mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, - mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, - mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, - mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, - mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia - -2001/01/24 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun - - * install_steps.pm (afterInstallPackages): cleanup - - * interactive.pm: better documentation of ask_from_entries_refH features - (entry) - -2001/01/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file - -2001/01/22 dam's <damien@mandrakesoft.com> - - * install_steps_interactive.pm, netconnect.pm: corrected slide bar, and - added network conf save in /root/networking.tmp - -2001/01/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/network.c: add automatic support in choice of NET device, in - case of multiple NET devices - consistent dot-terminated error messages, consistent no-dot log messages - re-put Netmask input per default (void entry -> automatic guess) - - * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent - dot-terminated error messages, consistent no-dot log messages - -2001/01/22 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/id.po: updated Indonesian file - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, - share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, - share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, - share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated po files - - * share/po/wa.po: updated po files - updated pot file - - * install2.pm, lang.pm: fixed the places where console fonts and related - files are put under - /etc/sysconfig to the places really used by console-tools - - * share/po/DrakX.pot: updated pot file - - * share/po/hr.po: updated po files - updated Croatian file - -2001/01/22 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way, - read_rpmsrate - can be called standalone. - - * network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm, - install_interactive.pm, install2.pm, partition_table.pm, install_any.pm, - any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is - deprecated, replaced by !$::expert - -2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in - network/ftp installs - -2001/01/21 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (create_ctree): fix case with formatted list - -2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's - - * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in - network/ftp installs - -2001/01/21 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (create_ctree): fix case with formatted list - -2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's - -2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files - -2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/nfsmount.c: fix remaining perror's - - * mdk-stage1/stage1.c: fix remaining perror's - - better msg in fatal errors - - do not include code to spawn a shell for releases - -2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files - -2001/01/21 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectMouse): use ask_from_treelist_ - - * interactive.pm (ask_from_treelist_): created, split with the separator, - call translate on - words, then re-join. - -2001/01/19 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: fixes for CD not changeable. - - * install_steps_interactive.pm: fixed unselect group and inoperant - individual package selection. - removed expert mode and install class. - -2001/01/18 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: fixed obligation of relative large install, now - minimum is lesser. - - * install_steps_gtk.pm: make sure no ratio above 1 can occur, still need - to see why as it happens - on install-abort-choices-install or - install-abort-choices-fs-format(none)-choices-install - - * live_install: update live install to match /tmp/image instead of - /tmp/rhimage. - -2001/01/17 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm, install_any.pm: fixes with /tmp/rhimage and - /tmp/image. - - * pkgs.pm: update to use new header file format in hdlist (added arch) but - depslist has not it... - - * install2.pm: fixes with /tmp/rhimage and /tmp/image - -2001/01/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/bg.po: updated bulgarian file - -2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/url.c: use strrchr instead of doing it by hand - - * mdk-stage1/insmod-busybox/busybox.h, - mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c: - - - replace remaining perror's with log_perror's - - little code cleanup - - * mdk-stage1/stage1-data/stage1.tar.bz2, - mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0 - - * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c, - mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: - - add load of third party modules in Expert mode (PS rulz) - -2001/01/12 siegel - - * share/po/de.po: updates - -2001/01/12 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: fixed addUser for invocation of - any::ask_users. - fixed bad invocation of installation of X server. - -2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/cdrom.c: add more memory carefulness with CDROM install - - add wait_message for initializing of CDROM's (it can be long when - it's SCSI) - - print CDROM drive names (model) in dialogs - - * mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: - - fix behaviour with bad ISO images (DISK installs) - - better dialogs for DISK installs - -2001/01/12 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: make lang list in format for tree-selector - -2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/disk.c: fix failing umount for DISK installs in some failing - loopback situations - act nicely when no partitions are found on some disk - - * mdk-stage1/modules.h: polish generic blank.img situation (no modules - and/or modules.dep available) - - * mdk-stage1/lomount.c: fix failing umount for DISK installs in some - failing loopback situations - better log messages - continue anyway when insmod'ing of modules fail (for blank.img) - - * mdk-stage1/probing.c: close some fd's - - * mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img - situation (no modules and/or modules.dep available) - continue anyway when insmod'ing of modules fail (for blank.img) - -2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/Makefile, mdk-stage1/disk.c: - - add DISK install from ISO image file - - add FTP - - add HTTP - - use single place for mountpoints and static directories - - * mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: - - add DISK install from ISO image file - - * mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h, - mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c, - mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: - - add FTP - - add HTTP - - use single place for mountpoints and static directories - - * mdk-stage1/insmod-busybox/Config.h: tweak config - -2001/01/11 Pixel <pixel@mandrakesoft.com> - - * standalone/adduserdrake: adduserdrake may handles autologin - - * install_steps.pm (addUser): set autologin - - * install2.pm (addUser): moved setAuthentication to install_steps::addUser - - * install_steps_interactive.pm (addUser): fix - -2001/01/11 dam's <damien@mandrakesoft.com> - - * install_steps.pm, install_steps_interactive.pm, ChangeLog, - netconnect.pm: updated - -2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when - mar or marfiles not available to perform consistency check - -2001/01/11 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (configureX): call directly $o->pkg_install, no need to - add 'XFree86-' at the beginning - (addUser): use any::write_passwd_user - (setRootPassword): use any::write_passwd_user - (configureX): fix bad $install given to Xconfigurator::main - - * any.pm (write_passwd_user): add or update an entry in /etc/passwd - (ask_users): created, interactively ask users to add (used in - adduserdrake and install) - (allocUsers, addUsers): changed the prototype - (setupBootloader): grep out fat partitions for the "Boot device" - propositions (people are too stupid) - - * my_gtk.pm (main): third argument is a function to call before leaving in - case of - "cancel" clicked. - - * interactive_gtk.pm (create_ctree): fix default value selecting failing - (in case of "format") - (ask_from_entries_refW): apply "format" on label when icon is missing - for iconlist - (ask_from_entries_refW): handle "canceled" callback. Permits to overrule - the cancel. - - * install_any.pm (g_auto_install): deep copy of $o->{users} because we're - modifying it - - * install_steps_interactive.pm (addUser): use any::ask_users - - * standalone/adduserdrake: use any::ask_users - - * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in - install2::main) - - * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos - here - - * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" - callback defaults - to "sub { 0 }" - -2001/01/11 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when - icon is missing for iconlist - (ask_from_entries_refW): handle "canceled" callback. Permits to overrule - the cancel. - - * install_steps.pm (configureX): call directly $o->pkg_install, no need to - add 'XFree86-' at - the beginning - (addUser): use any::write_passwd_user - (setRootPassword): use any::write_passwd_user - (configureX): fix bad $install given to Xconfigurator::main - - * any.pm (write_passwd_user): add or update an entry in /etc/passwd - (ask_users): created, interactively ask users to add (used in - adduserdrake - and install) - (allocUsers, addUsers): changed the prototype - (setupBootloader): grep out fat partitions for the "Boot device" - propositions (people are too stupid) - - * my_gtk.pm (main): third argument is a function to call before leaving in - case of - "cancel" clicked. - - * install_any.pm (g_auto_install): deep copy of $o->{users} because we're - modifying it - - * install_steps_interactive.pm (addUser): use any::ask_users - - * standalone/adduserdrake: use any::ask_users - - * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in - install2::main) - - * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos - here - - * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" - callback defaults - to "sub { 0 }" - -2001/01/11 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (autologin): moved to package any - - * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when - icon is missing for iconlist - (ask_from_entries_refW): handle "canceled" callback. Permits to overrule - the cancel. - - * install_steps.pm (configureX): call directly $o->pkg_install, no need to - add 'XFree86-' at - the beginning - (addUser): use any::write_passwd_user - (setRootPassword): use any::write_passwd_user - (configureX): fix bad $install given to Xconfigurator::main - - * any.pm (write_passwd_user): add or update an entry in /etc/passwd - (ask_users): created, interactively ask users to add (used in - adduserdrake - and install) - (allocUsers, addUsers): changed the prototype - (setupBootloader): grep out fat partitions for the "Boot device" - propositions (people are too stupid) - - * my_gtk.pm (main): third argument is a function to call before leaving in - case of - "cancel" clicked. - - * install_any.pm (g_auto_install): deep copy of $o->{users} because we're - modifying it - - * Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated) - - * install_steps_interactive.pm (addUser): use any::ask_users - - * standalone/adduserdrake: use any::ask_users - - * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in - install2::main) - - * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos - here - - * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" - callback defaults - to "sub { 0 }" - -2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal - size - - * mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c: - remove warnings from compile - -2001/01/10 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' - callback on clist/list/ctree - - * install_steps.pm (addUser): use any::pack_passwd - (setRootPassword): use any::unpack_passwd and any::pack_passwd - - * Xconfigurator.pm (cardConfiguration): adapt for $install which is - generic - (autologin): use $install which is now generic - - * install_steps_interactive.pm (selectLanguage): many_languages choice - moved there as advanced - - * my_gtk.pm (create_packtable): yet another try to have something nice :) - !! uses Gtk::Table::attach_raw which is available in - perl-GTK-0.7004-6mdk !! - (create_box_with_title): with the size given to set_usize for the scroll - containing the text widget in case of long text. and don't let the - scroll - grow. - (gtktext_insert): remove adding an ending "\n" (no more needed?) - - * any.pm (setAutologin): cleanup - (pack_passwd, unpack_passwd): created - -2001/01/10 dam's <damien@mandrakesoft.com> - - * install_steps_interactive.pm: corrected last message . firewall - -2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm, - parport*, plip) - -2001/01/10 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' - callback on clist/list/ctree - - * install_steps.pm (addUser): use any::pack_passwd - (setRootPassword): use any::unpack_passwd and any::pack_passwd - - * my_gtk.pm (create_packtable): yet another try to have something nice :) - !! uses Gtk::Table::attach_raw which is available in - perl-GTK-0.7004-6mdk !! - (create_box_with_title): with the size given to set_usize for the scroll - containing the text widget in case of long text. and don't let the - scroll - grow. - (gtktext_insert): remove adding an ending "\n" (no more needed?) - - * any.pm (setAutologin): cleanup - (pack_passwd, unpack_passwd): created - - * Xconfigurator.pm (cardConfiguration): adapt for $install which is - generic - (autologin): use $install which is now generic - - * install_steps_interactive.pm (selectLanguage): many_languages choice - moved there as advanced - - * standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2, - standalone/livedrake, standalone/drakboot, standalone/draksec, - standalone/netdrake, standalone/mousedrake, standalone/drakgw, - standalone/drakxservices, standalone.pm, standalone/draknet, - standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake, - standalone/drakxconf: use standalone and standalone::pkgs_install - -2001/01/09 Pixel <pixel@mandrakesoft.com> - - * any.pm (drakx_version): nicer (4gc) - - * install2.pm (main): log::l the drakx_version - - * my_gtk.pm (create_packtable): no_expand option added - - * interactive.pm (ask_from_entries_refH_powered_normalize): field - "disabled" added, - "advanced_messages" added - - * lang.pm (langs): created (transform the $o->{langs} hash ref in a list) - (pack_langs): use lang::langs - - * install_steps.pm (selectLanguage): $o->{langs} is now a ref so - initialize as such - - * Makefile (get_needed_files): generate /usr/share/VERSION which contains - the version - of ChangeLog (which is updated at each upload) - - * install_steps_interactive.pm (choosePartitionsToFormat): handle "check - for bad blocks" as advanced - (setRootPassword): remove choosing non-md5 or non-shadow passwords. - - * install_any.pm (setPackages): use lang::langs instead of using - $o->{langs} as a array ref (it is not so anymore) - (spawnShell): print the drakx_version - -2001/01/08 Pixel <pixel@mandrakesoft.com> - - * interactive.pm: fixes - (ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH - (ask_from_entries_refH_powered): remove "1;" (was there for debugging) - - * interactive_gtk.pm: fixes - (ask_from_treelistW): removed - (create_ctree): created, used for ``type => treelist'' entries - - * my_gtk.pm: fixes - - * ChangeLog: New snapshot uploaded - -2001/01/07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated - Czech, Norwegian and Serbian files - -2001/01/07 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm: update code for new ask_from_entries_refH - which doesn't handle optional ok/cancel names in arg 1. - must be handled via ask_from_entries_refH_powered - (selectLanguage, selectKeyboard): use ask_from_entries_refH instead of - ask_from_listf_, it enables the use of advanced - - * any.pm, printerdrake.pm: update code for new ask_from_entries_refH which - doesn't handle optional ok/cancel names in arg 1. - must be handled via ask_from_entries_refH_powered - - * interactive.pm: update code for new ask_from_entries_refH which doesn't - handle optional ok/cancel names in arg 1. - must be handled via ask_from_entries_refH_powered - (ask_from_listf_no_check): replaces ask_from_list_no_check - (ask_from_entries_refH_powered): sorts the list if needed or wanted - - * partition_table_raw.pm (test_for_bad_drives): created - - ugly stuff needed mainly for Western Digital IDE drives - - try writing what we've just read, yells if it fails - - testing on last sector of head #0 (unused in 99% cases) - - * ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an - non-existent - file, stressing the ftp server :-/ ) - for the moment, just release cdrom.img, hd.img and hdreiser.img - others should should come... - - * install_steps.pm: for the moment, just release cdrom.img, hd.img and - hdreiser.img - others should should come... - - * interactive_gtk.pm (ask_from_listW): removed - (create_list): calls "format" on list elems before prompting them - (create_clist): created - (ask_from_entries_refW): calls create_clist in case of list with no help - - * install_steps_gtk.pm (installPackages): autoflush stdout before beeping - (installPackages): don't take into account the time when prompting the - user - - * common.pm (may_apply): added - - * install_any.pm (getHds): test_for_bad_drives called on hard drives - (getHds): ensure $o->{hds} is not set until the hard drives are checked - -2001/01/06 Pixel <pixel@mandrakesoft.com> - - * keyboard.pm (setup): don't xmodmap if DISPLAY is unset - - * ChangeLog: New snapshot uploaded - New snapshot uploaded - -2001/01/06 Pixel <pixel@mandrakesoft.com> - - * keyboard.pm (setup): don't xmodmap if DISPLAY is unset - - * ChangeLog: New snapshot uploaded - -2001/01/06 Pixel <pixel@mandrakesoft.com> - - * keyboard.pm (setup): don't xmodmap if DISPLAY is unset - - * standalone/rpmdrake: deprecated (and has been for a long time now) - - * network.pm, install_steps_interactive.pm, netconnect.pm, - install_interactive.pm, standalone/adduserdrake, any.pm, - Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: - ask_from_entries_refH parameter format has changed so change all - accesses to it. - -2001/01/05 François Pons <fpons@mandrakesoft.com> - - * lang.pm, keyboard.pm: forget _exit in child process after a fork of - DrakX - removed need of packdrake binary - - * Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames - - * live_install2: cleanup to keep libperl.so but the right one - - * live_install: no more copy of files on live system, now use environment - variable by DrakX cleanup - - * perl2fcalls: added packdrake call (via new but incomplete) and package - - * install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary - - * netconnect.pm: fixed syntax error - - * modules.pm: eval insmoding ide-cd (just in case) - removed need of packdrake binary - -2001/01/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan - and Japanese files - -2001/01/05 Pixel <pixel@mandrakesoft.com> - - * mouse.pm: help cperl-mode - - * interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm, - interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to - new ask_from's: - - ask_from_entries_ref is deprecated, use ask_from_entries_refH - - ask_from_list now calls ask_from_entries_refH_powered - still not done: - - ask_from_treelist should use ask_from_entries_refH_powered, - and lists with no help should use CList (List is bad) - - keyboard and mouse binding is still rough - - enhance the look - - * keyboard.pm: add the percentage of each keyboard types (as a comment for - now) - -2001/01/04 dam's <damien@mandrakesoft.com> - - * netconnect.pm: cleaned... everything should be buggy. - -2001/01/04 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed some old $p->{file} by new $p->[$FILE] - code cleanup and fixes for lilo not upgrade - -2001/01/04 Pablo Saratxaga <pablo@mandrakesoft.com> - - * install_any.pm: fixed the functions doing the lists of languages - - * lang.pm: fixed the functions doing the lists of languages - The list of languages now has complete locale names insted of just - language - code (that is needed to differentiate zh_CN and zh_TW among others) - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file - - * share/po/eu.po: updated Basque file - updated Brazilian file - -2001/01/04 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: some pixelization using the new if_ - - * install_steps_interactive.pm (setRootPassword): fix pixelization - keep $o->{langs} unpacked to simplify things - if_ pixelization - - * common.pm (%EXPORT_TAGS): add if_ in "common" exported tags - (if_): created. Use it to replace things like - ($::expert ? $val : ()) by if_($::expert, $val) - - * keyboard.pm: nl keyboard is not used, so defaults to us_intl - - * lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs} - unpacked to simplify things - - * netconnect.pm: quite a few clean-up (and buggying) - -2001/01/03 dam's <damien@mandrakesoft.com> - - * install_steps_interactive.pm: admin user removed before beeing added - - * netconnect.pm: corrected typo - LAN is configured with default value if firewall - -2001/01/03 François Pons <fpons@mandrakesoft.com> - - * diskdrake.pm: fixed invocation of change_type by clicking on legend - unless expert - - * install2.pm: fixed usage with testing - - * install_steps.pm: fixed some other services to start in case something - gets wrong, - this fixes some deadlock on upgrade from 7.0. - fixed usage with testing - - * partition_table.pm: fixed overlapping partitions between one extended - and one regular primary. - should be accepted (log printed instead of error) as diskdrake allow - their - creation in expert. - -2001/01/03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: add checks of dependencies on marfiles - fix a couple of broken dependencies in modules.pm - -2001/01/03 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format - -2001/01/03 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): move the setting of PATH and spawnShell *after* - setting $prefix - -2000/12/31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/rpmsrate: added a few locales dependences - -2000/12/29 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (addUser): typo fix - - * ChangeLog: New snapshot uploaded - - * ftp.pm (getFile): recall getFile after rewindGetFile - -2000/12/29 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (addUser): typo fix - - * ftp.pm (getFile): recall getFile after rewindGetFile - -2000/12/28 Pixel <pixel@mandrakesoft.com> - - * Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and - jako - -2000/12/26 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * keyboard.pm: Add the very ghost option REMOVE_MOD_META_L. - -2000/12/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated Lithuanian file - -2000/12/22 dam's <damien@mandrakesoft.com> - - * install_steps.pm, install_steps_interactive.pm: corrected admin user - setting for firewall install. - -2000/12/22 François Pons <fpons@mandrakesoft.com> - - * modules.pm: fixed load_multi on live. - added back all removed module with the new great mdk-stage1 of gégé. - -2000/12/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * modules.pm: make them work with kernel-2.4 by disabling non existent - modules - -2000/12/22 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage - -2000/12/21 Pixel <pixel@mandrakesoft.com> - - * ChangeLog: New snapshot uploaded - -2000/12/21 dam's <damien@mandrakesoft.com> - - * install2.pm: firewall : automatic class set when firewall (beginner=0) - - * install_steps_interactive.pm: if firewall, admin password obliged - - * install_steps.pm: added setAdminpassword (a little bit redundant, sorry) - - * any.pm: corrected module stuff.. Thanx to pixel - -2000/12/20 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (selectMouse): unsure the device exists - - * unused/christmas-karaoke.patch: handle isa cards - -2000/12/19 Pixel <pixel@mandrakesoft.com> - - * ChangeLog: New snapshot uploaded - New snapshot uploaded - -2000/12/19 dam's <damien@mandrakesoft.com> - - * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, - standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, - standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, - standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, - standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, - standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, - standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, - standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, - standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, - standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, - standalone/pixmaps/draknet3.xpm: added control-center. - -2000/12/19 Pixel <pixel@mandrakesoft.com> - - * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss - - * unused/christmas-karaoke.patch: Happy Christmas :) - - * install_any.pm: spawnShell: set DISPLAY, just in case :) - - * install2.pm: set PATH before doing spawnShell - - * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) - - * ChangeLog: New snapshot uploaded - -2000/12/18 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm: added embedded support for control-center - corrected embedded support. - new control center and related - - * netconnect.pm: corrected typo - corrected typo - - * standalone/drakxservices, standalone/control-center, ChangeLog, - standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, - standalone/drakboot: new control center and related - - * install_gtk.pm: added firewall support - - * install2.pm: included firewall handling - changed firewall comportement - - * install_steps_interactive.pm: changed firewall comportement - - * modules.pm: corrected bad mergeinconf - -2000/12/18 Pixel <pixel@mandrakesoft.com> - - * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more - cfI/xfI - remove isdndb.net - -2000/12/19 dam's <damien@mandrakesoft.com> - - * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, - standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, - standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, - standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, - standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, - standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, - standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, - standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, - standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, - standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, - standalone/pixmaps/draknet3.xpm: added control-center. - -2000/12/19 Pixel <pixel@mandrakesoft.com> - - * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss - - * unused/christmas-karaoke.patch: Happy Christmas :) - - * install_any.pm: spawnShell: set DISPLAY, just in case :) - - * install2.pm: set PATH before doing spawnShell - - * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) - -2000/12/18 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm: added embedded support for control-center - corrected embedded support. - new control center and related - - * netconnect.pm: corrected typo - corrected typo - - * standalone/drakxservices, standalone/control-center, ChangeLog, - standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, - standalone/drakboot: new control center and related - - * install_gtk.pm: added firewall support - - * install2.pm: included firewall handling - changed firewall comportement - - * install_steps_interactive.pm: changed firewall comportement - - * modules.pm: corrected bad mergeinconf - -2000/12/18 Pixel <pixel@mandrakesoft.com> - - * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more - cfI/xfI - remove isdndb.net - -2000/12/16 Pixel <pixel@mandrakesoft.com> - - * standalone/mousedrake, standalone/drakgw: use ldetect-lst - - * Makefile.drakxtools: fix daminetsex - use ldetect-lst - pci_probing now done by libldetect - config files moved in package ldetect-lst - - * share/list: use ldetect-lst - pci_probing now done by libldetect - config files moved in package ldetect-lst - - * any.pm: fix daminetsex - - * modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm, - mouse.pm: use ldetect-lst for usb => now auto detects mice types :) - - * c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto - detects mice types :) - use ldetect-lst - pci_probing now done by libldetect - config files moved in package ldetect-lst - - * Makefile.config: fix daminetsex - use ldetect-lst - - * Makefile: use ldetect-lst for usb => now auto detects mice types :) - use ldetect-lst - - * netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm, - Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net, - share/Cards2CardsNames: pci_probing now done by libldetect - config files moved in package ldetect-lst - -2000/12/15 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst - - * install_steps.pm: clean all unneeded stuff - -2000/12/14 dam's <damien@mandrakesoft.com> - - * any_new.pm, netconnect_new.pm: preparing for big jump. - - * netconnect.pm: Big jump. The *_new.pm are replaced by *.pm - Everything should work, but you better test :) - - * standalone/control-center: big improvement and cosmetic changes - a lot of improvement. Is able to launch multiples soft passing in - arguments. - new file. Its location should change soon. - - * any.pm: Big jump. The *_new.pm are replaced by *.pm - Everything should work, but you better test :) - corrected typo. - -2000/12/14 Pixel <pixel@mandrakesoft.com> - - * share/compssList: obsoleted by rpmsrate - - * share/rpmsrate: obsoletes compssList - - * share/compssUsers, install_steps.pm, install_steps_interactive.pm, - Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm: - move from compssList to rpmsrate - - * Newt/Newt.xs: cleanup (use of alloca to pass parameters) - -2000/12/13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/it.po: updated Italian file - -2000/12/12 dam's <damien@mandrakesoft.com> - - * netconnect.pm: typo + if firewall, don't display 'disable network' - - * standalone/draknet2: new version... still working on it - - * ChangeLog: commit - - * share/themes-mdk-Firewall.rc: added firewall theme - - * modules.pm: my fault, corrected renaud's patch incorporation - - * share/logo-mandrake-Firewall.xpm: new logo - -2000/12/12 François Pons <fpons@mandrakesoft.com> - - * share/list: added packdrake.pm as packdrake has been splited. - - * pkgs.pm: fixed versionCompare to always return number. added checking of - version to - select obsoletes on upgrade. - -2000/12/11 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: Radeon uses 3D now. - - * lang.pm: fixed write_langs for upgrade. - i18n sucking fixes. - - * Xconfigurator.pm: Radeon uses 3D hw accel theoritically now. - -2000/12/09 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: Added configuration of Vietnamese input server - -2000/12/09 Pixel <pixel@mandrakesoft.com> - - * standalone/adduserdrake: remove debugging code - - * install2.pm (selectInstallClass): give $clicked to selectInstallClass - - * interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to - null in case of error - on hidden entry cuz newt doesn't display null entries, disturbing - - * install_steps_interactive.pm (formatMountPartitions): the format - partition dialog created at first use, - so that it doesn't appear if no partitions are formatted. - (selectInstallClass): ensure expert choice is kept if it was prechosen - (selectInstallClass): if expert pre-chosen, ensure expert is kept - - * interactive_gtk.pm, install_steps.pm: small renicing - -2000/12/08 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed bug in list of packages provided by another one. - -2000/12/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po, - share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po, - share/po/az.po, share/po/tr.po: updated Brazilian file - -2000/12/08 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): warn if VERSION file doesn't exist - (formatPartitions): call rotate_logs after mounting the partitions - - * mouse.pm (write_conf): fix to make make test_pms happy - - * install_steps.pm (exitInstall): save the report.bug in /root/report.bug - - * any.pm (rotate_logs): created, rotates ddebug.log and install.log in - /root - - * ftp.pm (new): retry in case of ftp connection/login - - * commands.pm: report_bug: created, returns a string - -2000/12/07 dam's <damien@mandrakesoft.com> - - * netconnect.pm: corrected ADSL connection choice. - corrected typo - -2000/12/06 dam's <damien@mandrakesoft.com> - - * install2.pm: erare humanum es - firewall begins to infect the install :). - new meta_class. - - * share/logo-mandrake-Firewall.xpm: aded logo for firewall - - * install_gtk.pm: corrected errors - left pixmap centered if firewall - improved the firewall theme. - errare humanum es - firewall infects the install. - The logo is changed if firewall. - -2000/12/06 Pixel <pixel@mandrakesoft.com> - - * standalone/keyboarddrake: add possibility to use keyboarddrake - non-interactive (aka give the keyboard as - first parameter) - - * lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm, - install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted. - Now rpm uses %_install_langs in /etc/rpm/macros - -2000/12/05 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: final fixes to versionCompare to make sure no deadlock can - occurs. - - * Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration. - -2000/12/05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po, - share/po/es.po: updated several pofiles - -2000/12/04 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: use isCdNotEjectable. - - * common.pm: added function isCdNotEjectable. - - * share/Cards+: SiS620 card are said to be unsupported by XF4. - - * pkgs.pm: load only one hdlist in memory if CD is not ejectable (low - memory). - fixed compareVersion for deadlock. removed silly CODE print on deporder - problems. - - * Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode. - -2000/12/03 dam's <damien@mandrakesoft.com> - - * mouse.pm: incorporated cmodifications in the firewall branch - - * netconnect.pm: netconnect_new > netconnect.pm - - * netconnect_consts.pm: incorporated in the firewall branch. - - * standalone/draknet2: incoporated in the firewall branch - - * any_new.pm: any_new > any, so we remove it now. - - * netconnect_new.pm: netconnect_new > netconnect, so we remove it now. - incorporated in the firewall branch - - * modules.pm: incorporated modifications to the firewall branch. Hope they - won't break anything... - -2000/12/02 dam's <damien@mandrakesoft.com> - - * share/po/az.po: correction in firewall incorporated - - * ChangeLog: first attempt ro build the firewall install - - * standalone/mousedrake: incorporated in the firewall branch - - * share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated - in the firewall branch - -2000/11/28 dam's <damien@mandrakesoft.com> - - * modules.pm: included reno's patches. Now should work without kudzu. - branch to build the firewall install. - - * standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm, - standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm, - standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm, - standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm, - standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm, - standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm, - standalone/pixmaps/isdn.xpm: Initial revision - branch to build the firewall install. - - * partition_table_dos.pm, share/po/bg.po, share/po/sr.po, - share/template.in/cdrom.kdelnk.in, - share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c, - Makefile, share/consolefonts/lat0-sun16, - share/themes/DarkMarble-check_off.png, - share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc, - do_resize_fat, share/po/wa.po, share/po/is.po, - share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm, - class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm, - install_interactive.pm, c/README, Xconfig.pm, share/themes.rc, - share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc, - share/themes-blueHeart.rc, pkgs.pm, keyboard.pm, - share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po, - standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm, - share/step-green-click.xpm, partition_table_sun.pm, - share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c, - share/po/.cvsignore, share/ftin.xpm, standalone/draksec, - resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm, - Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm, - share/themes/marble3d-button4.png, share/rpm-unselected.xpm, - share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png, - c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm, - standalone/livedrake, share/diskdrake.rc, - share/themes/DarkMarble-check_on.png, standalone/draknet, - share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png, - share/po/ro.po, share/list, share/po/cs.po, share/po/be.po, - share/po/sp.po, share/step-orange-click.xpm, modparm.pm, - share/step-green.xpm, share/rpm-base.xpm, - share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po, - share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm, - share/Cards2CardsNames, Newt/Makefile.PL, - share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po, - share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po, - standalone/icons/findf.xpm, share/po/lt.po, - share/themes/mdk-check_off.png, fs.pm, c/.cvsignore, - share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm, - detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm, - standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm, - Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po, - share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm, - share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po, - resize_fat/.cvsignore, install_steps_interactive.pm, - share/themes/mdk-button4.png, live_install, standalone/draknet2, - any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm, - share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm, - share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl, - swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake, - g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po, - partition_table_mac.pm, standalone/mousedrake, devices.pm, - share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po, - share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm, - share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po, - Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc, - share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c, - share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm, - perl2etags, share/po/Changelog, standalone/drakboot, - resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc, - share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po, - share/MonitorsDB, share/template.in/Dos_.kdelnk.in, - standalone/printerdrake, services.pm, share/kmap2bkmap, - share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po, - common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm, - install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16, - share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames, - c/Makefile.PL, share/themes-mdk-Desktop.rc, - share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm, - share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw, - share/po/sl.po, standalone/rpmdrake, share/makedev.sh, - share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc, - install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm, - my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList, - share/po/fr.po, share/themes/DarkMarble-button3_in.png, - standalone/icons/ftin.xpm, share/modparm.lst, raid.pm, - standalone/diskdrake, share/po/ko.po, - share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop, - share/po/ja.po, any.pm, share/isdndb.net, - share/template.in/floppy.kdelnk.in, share/step-green-on.xpm, - share/step-red-click.xpm, share/po/Makefile, help.pm, - share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po, - share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po, - loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm, - Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm, - standalone/drakxservices, resize_fat/Makefile, fsedit.pm, - interactive_stdio.pm, live_install2, resize_fat/directory.pm, - share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot, - share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po, - share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm, - share/themes/marble3d-check2.png, ftp.pm, c/md5.h, - standalone/adduserdrake, share/themes/marble3d-button2.png, - partition_table_raw.pm, share/template.in/zip.kdelnk.in, - share/locales.tar.bz2, standalone/icons/fileopen.xpm, - share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm, - commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po, - interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png, - interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm, - bootloader.pm, share/po/af.po: branch to build the firewall install. - -2000/11/28 François Pons <fpons@mandrakesoft.com> - - * install2.pm: change upgrade section for keyboard. - - * install_steps_gtk.pm: extended chooseSizeToInstall. - - * install_steps.pm: updated comment. - - * pkgs.pm: fixed misuse of map with values returing list which are indexed - afterward. - - * install_any.pm: removed some more logs. - - * keyboard.pm: keep track of unknown keyboard (for upgrade) - - * install_steps_interactive.pm: modified def_mark to 59 (gl hw - acceleration level) and upgrade use this level - for newbies so. - make sure a recommended upgrade get the minimum and a little more (80). - choose default size according to a default mark (currently 49). - -2000/11/27 dam's <damien@mandrakesoft.com> - - * netconnect_consts.pm: added isdn Gazel card 10b5 1151 - -2000/11/27 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm (@bad_types): list of the different type of extended - partitions - (important_types): remove @bad_types from important_types - -2000/11/25 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ru.po: updated Russian file - -2000/11/24 dam's <damien@mandrakesoft.com> - - * mouse.pm: doc + split - - * netconnect_new.pm: added depmod after having writed modules.conf - - * standalone/mousedrake: splited - -2000/11/24 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: avoid .la files for selection. - - * install_steps.pm: added missing portmap. - -2000/11/23 dam's <damien@mandrakesoft.com> - - * standalone/draknet2: progressbar. - -2000/11/23 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps_gtk.pm: updated with - structural change of pkgs. - - * install_any.pm: removed some ugly logs. - updated with structural change of pkgs. - - * install_steps.pm: added tempory fix for initscripts %post. - updated with structural change of pkgs. - - * pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk. - removed ugly log on transaction. - added special case to avoid counting kernels space when upgrading - as these package are not upgraded (just installed). - Memory usage optimization, change structure of storing - package informations. lot of fork to make sure of - freeing memory by perl (no free on used hashes or arrays - usable by other than perl), now upgrade takes as much as - install which takes at least 0.5Mb less than before. - -2000/11/23 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: put all tina stuff to weight 0 - -2000/11/21 François Pons <fpons@mandrakesoft.com> - - * Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files, - keep - wacom entries. - - * Xconfigurator.pm: upgrade for XF86Config, take care of resolution and - depth wanted. - - * install_steps.pm: always try to get default from /etc/X11/XF86Config - removing logs. - - * pkgs.pm: cosmetic changes for upgrade, removing some logs. - - * install_steps_interactive.pm: removed code to ask if take care of - /etc/X11/XF86Config* files. - added wait message during rebuild of rpm database as it takes some time. - - * Xconfigurator_new.pm: WARNING - -2000/11/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/az.po: updated Azeri file - -2000/11/20 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: clean up as today filelist is no more. - use parsehdlist from rpmtools-2.1-3mdk or above instead of - perl code from DrakX forking to simulate a filelist server. - this increase performance by 100 to 150% on selection of - packages to upgrade. - - * share/list: added parsehdlist. - - * c/stuff.xs.pm: removed logs. - -2000/11/20 Pixel <pixel@mandrakesoft.com> - - * share/Cards+: add radeon - - * install_steps_auto_install.pm (exitInstall): fix message - - * install_steps.pm (afterInstallPackages): moved the - writeandclean_ldsoconf here - - * fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points - -2000/11/17 Guillaume Cottenceau <gc@mandrakesoft.com> - - * install_any.pm: add openuniverse to the list of gl apps - -2000/11/16 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: corrected isdn_get_{list, info} - -2000/11/16 François Pons <fpons@mandrakesoft.com> - - * share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-) - - * modules.pm: tempory version for current glibc, a lot of module have been - removed due to - problem of stage1 increase in size when compiled with glibc-2.2 and - current - modutils. - - * c/Makefile.PL: updated with rpmlib 4. - - * c/stuff.xs.pm: completed something that seems to work almost correctly - at the first look - with rpmlib 4. - -2000/11/16 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: add netscape-german, thx to florin - isdn4k-utils gets same weight as isdn4net, thx to Florin - -2000/11/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po: updated Norwegian file - - * share/po/sk.po: updated Slovak file - -2000/11/15 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: added isdn_get_list and isdn_get_info - calls modules::write_conf to fill the modules.conf. - - * Xconfigurator_new.pm: added to fork frontends backends. Not operationnal - at all for now. - - * modules.pm: when loading a new module, add an alias for it, even in - standalone mode. - -2000/11/15 François Pons <fpons@mandrakesoft.com> - - * c/stuff.xs.pm: updated for rpm 4. - - * pkgs.pm: rpmdepOrder again (for new TAGp) - -2000/11/15 Pixel <pixel@mandrakesoft.com> - - * c/Makefile.PL: add librpmio - - * c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc - (dev_t) - -2000/11/14 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: better structure for the ethx-driver. - added call to add_alias and write_conf - - * standalone/draknet2: updated - -2000/11/14 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: removed foreach (<... which are eating memory - fork install on upgrade for searching trhough filelist, this saves - about 20Mb of memory before rpmlib transaction are started so its is - more than 2 times faster for upgrading a system, sorry it was - effectively - a machine two overloaded that makes the upgrade slower. - make rpmlib not to check size as DrakX should do it. - added special cases for selection of packages according to files, avoid - all kde-i18n packages if their locales-$lang is not selected, avoid - a -devel package if only one files is updated (typical for fixes on - package by moving files around). - - deactivated rpmdepOrder as it should be done directly in - depslist.ordered - file. - - fixed obsoletes which never run correctly, even if almost no package are - selected explicitely this way. - - added log during selection of packages to upgrade to keep a track of - what DrakX is doing. - - * modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm, - Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm, - printer.pm, Xconfigurator.pm: removed foreach (<... which are eating - memory - -2000/11/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/da.po: updated Danish file - -2000/11/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: Integrate Till's patches for better work with Cups. - -2000/11/12 Pixel <pixel@mandrakesoft.com> - - * standalone/mousedrake: fix for bug #1350 - (mousedrake dies with: Undefined subroutine &mouse::serial_ports_names) - - * pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and - .cz22 for - .cz2) that makes for than one CD install breaks :-( - -2000/11/11 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, - share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, - share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, - share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, - share/po/pl.po, share/po/fi.po, share/po/no.po, - share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, - share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, - share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - -2000/11/10 dam's <damien@mandrakesoft.com> - - * standalone/draknet2: draknet2 : new version of draknet, post-install - only, uses only libDrakX backend, beautyfull - - * netconnect_new.pm: completed adsl_conf_backend - corrected conf_network_card_backend : return interface and module - separately - splitted pppconfig. - -2000/11/10 François Pons <fpons@mandrakesoft.com> - - * share/po/fr.po: typo fixing - - * printerdrake.pm: fixed wrong case for managing IP for remove CUPS server - updated typo for remote CUPS server configuration dialog - -2000/11/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files - - * share/po/wa.po, share/po/da.po: updated Danish and Walloon files - -2000/11/10 Pixel <pixel@mandrakesoft.com> - - * c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent - section) - -2000/11/09 dam's <damien@mandrakesoft.com> - - * netconnect.pm: added handling for 2 ethernet cards with the same module - -2000/11/09 François Pons <fpons@mandrakesoft.com> - - * share/po/fr.po: add some missing translation (mainly printer for CUPS - remote config) - - * printer.pm: make sure to restart cups when cupsd.conf is modified. - - * printerdrake.pm: fixed modification of BrowsePoll on a existing file. - -2000/11/08 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: updated - -2000/11/08 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: make sure class discarding do not destroy result - - * pkgs.pm: added new function for selected or installed accessor on pkg - make sure package already installed for oem are marked as selected, as - some - code refer to this state to perform some actions (install_urpmi) - - * install_steps.pm: fixed for urpmi again; - - * printerdrake.pm: add management of BrowsePoll <ip>:<port> in - /etc/cups/cupsd.conf - - * printer.pm: add minimal management of /etc/cups/cupsd.conf - -2000/11/08 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136) - -2000/11/08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/es.po: updated Spanish file - -2000/11/07 dam's <damien@mandrakesoft.com> - - * mouse.pm: now there are 8 ttyS* available for configuration. Used for - internal modem configuration that uses ttyS* > 3 - - * netconnect_new.pm: ttyS0 -> ttyS7 available for configuration - some doc - -2000/11/07 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128). - - * install_steps_interactive.pm: use of install_any::boot_medium to avoid - listing medium used for boot - - * install_any.pm: use of $boot_medium where the boot medium is used - (default 1) - -2000/11/07 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to - <sileryti@mail.com> - -2000/11/07 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): in oem, configureX automatic - (main): $::oem is now global :-( (needed in install_steps.pm) - - * install_steps.pm (afterInstallPackages): give medium 'cdrom' to - install_urpmi in case of $::oem - -2000/11/06 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: backend/frontend fork complete - - * any_new.pm: load_thiskind changed to load_thiskind_backend, the wait - function is passed by argument - - * network.pm: configureNetwork2 commented. - -2000/11/06 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: created function for examining already installed package on - install (oem). - - * install2.pm: add a flag to allow by default formating / - - * install_steps.pm: conditionnal format of / and use already installed - packages if any on install. - -2000/11/06 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius - <ajulius@yahoo.com> - -2000/11/06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file - GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to - ascii transliteration for them - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, - share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, - share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, - share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, - share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, - share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, - share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, - share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, - share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, - share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, - share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, - share/po/af.po: updated pot file - - * keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds - -2000/11/06 Pixel <pixel@mandrakesoft.com> - - * install2.pm (formatPartitions): formatMountPartitions done even in - upgrade - (main): set $o->{partitioning}{use_existing_root} in oem - - * install_steps.pm (doPartitionDisksAfter): remove the mount_all which is - plain dumb - (doPartitionDisksAfter): fs::mount_all moved here - (doPartitionDisks): use $o->{partitioning}{use_existing_root} - - * install_any.pm (use_root_part): fs::mount_all really removed - (use_root_part): fs::mount_all removed - - * install_steps_interactive.pm (choosePartitionsToFormat): don't propose - already mounted partitions - (installCrypto): nicer layout - -2000/11/05 dam's <damien@mandrakesoft.com> - - * mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse' - -2000/11/05 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette - <yves@maniette.com> - -2000/11/01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/eo.po: updated Esperanto file - -2000/10/31 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: continuing forking frontend - backend. adsl ist - nearly finished - - * any_new.pm: added this file to fork frontends and backends in any.pm - -2000/10/30 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux - tu damsera - -2000/10/30 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/wa.po: updated Walloon file - - * share/keyboards.tar.bz2: updated keyboards - -2000/10/30 Pixel <pixel@mandrakesoft.com> - - * lang.pm (load_po): backslash @ in po strings, otherwise the eval fails - -2000/10/28 dam's <damien@mandrakesoft.com> - - * netconnect_new.pm: new version of draknet. Splited frontends - backends - -2000/10/28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/tr.po: updated Turkish file - -2000/10/27 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: remove the noising rpm output command line when loging - installed rpm - size (only usefull for live_update and just for conveniance). - - * pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP - hack) - before reading a compssUsers file. - - * live_install: add VERSION in list of file that have to be symlinked. - - * common.pm: list_skels returns list of existing directory and writeable. - - * live_install2: Make sure to remove font path in /tmp/drakx before - exiting. - -2000/10/26 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and - Turkish files - -2000/10/24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: fortune-mod gets 10/0/10 on request from egil - -2000/10/24 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/pl.po: updated Polish file - -2000/10/23 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/ca.po: updated Catalan file - -2000/10/23 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns - to please jl :) - - * detect_devices.pm (floppies, probeall): add require "modules" as it - should be - - * install_interactive.pm (partitionWizardSolutions): add "require - resize_fat::main" as it should be - -2000/10/22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has - 74/0/74 - -2000/10/21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish - and Ukrainian files - -2000/10/20 fabman - - * share/po/es.po: updated - -2000/10/20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: ntp to -1/-1/-1 - -2000/10/19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: put all packages requiring kde1-compat to 0 except - kisdn-free - aumix now gets a high weight (79) because it's required to save the - mixer - settings at shutdown - -2000/10/19 Pixel <pixel@mandrakesoft.com> - - * share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212) - -2000/10/19 tlb - - * share/po/da.po: 100%, Troels Liebe Bentsen. - -2000/10/18 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/az.po: Added AZeri file - - * share/po/no.po: updated Norwegian file - -2000/10/17 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused - code in ineractive_gtk - added some isdn card in pcitable - corrected typos, and made ISA isdn work - -2000/10/17 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/lv.po: updated Latvian file - -2000/10/16 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, - share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, - share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, - share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, - share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, - share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, - share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, - share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, - share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, - share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, - share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, - share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file - - * standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace - setting - -2000/10/16 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (cdroms): fix the setting of scdX for ide burners - - * share/compssList: sympa is -1 except for server - - * keyboard.pm (write): small pixelization (neater now) - - * install_steps.pm (installPackages): don't run ldconfig in g_auto_install - -2000/10/15 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/nl.po: updated Dutch file - -2000/10/14 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm, keyboard.pm: small fix for Swedish locale - - * share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po, - share/po/wa.po, share/po/de.po: updated Bulgarian file - -2000/10/13 François Pons <fpons@mandrakesoft.com> - - * partition_table_empty.pm: empty partition table as assumed only if the - MBR is really composed of only null chars. - -2000/10/13 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: added viavoicemenu - -2000/10/12 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (ask_mntpoint_s): dqs - -2000/10/11 Pixel <pixel@mandrakesoft.com> - - * .cvsignore: ignore flog files - - * install2.pm (main): test - - * ChangeLog: qsdqsd - - * install_steps_interactive.pm: * (selectKeyboard): set default - $o->{langs} to $o->{lang} - -2000/10/10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw, ChangeLog: make only one call to urpmi in order to - install all the needed rpm's - -2000/10/10 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/po/no.po, share/po/es.po: updated Norwegian file - - * share/po/pl.po: updated Polish file - - * share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file - -2000/10/10 tlb - - * share/po/da.po: 99%. - -2000-10-10 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: make only one call to urpmi in order - to install all the needed rpm's - -2000-10-10 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-10 Pixel <pixel@mandrakesoft.com> - - * install2.pm: increase $::VERSION - -2000-10-09 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: update after Dam's new messages in netconnect - -2000-10-09 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-09 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (kdeicons_postinstall): remove the handling of - doc desktop icons. see dadou - -2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssUsers: new list (with icons) - - * share/list: add icons for compssUsers - -2000-10-09 dam's <damien@mandrakesoft.com> - - * standalone/draknet: added wait message - -2000-10-09 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-09 Pixel <pixel@mandrakesoft.com> - - * share/themes-*.rc: change the fg[INSENSITIVE] entry - -2000-10-09 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: added tuxracer in OpenGL games to install if an - accelerated card has been found. - -2000-10-09 dam's <damien@mandrakesoft.com> - - * netconnect.pm (main): asking connection after writing start/stop scripts. - (adsl_conf): if during install, don't use chkconfig, make the - links directly for the adsl init script. - -2000-10-09 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-09 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (afterInstallPackages): UserView in kdmrc is - now true by default. So put false if security >= 3 instead of - removing it. - -2000-10-09 François Pons <fpons@mandrakesoft.com> - - * any.pm: default speed of modem set to 115200. - - * fs.pm: fixed format of RAID partition. - - * install_interactive.pm: take into account RAID partitions for - searching / partition. - -2000-10-09 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-09 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (selectKeyboard): don't assume $o->{langs} is set - (selectLanguage): don't set $o->{langs} (so that you can go back - and it works) - - * common.pm (round_up, round_down): ensure number is an integer - - * install_steps_interactive.pm (chooseGroups): take into account - the min_level to compute the size - -2000-10-08 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): move the - computing of max_size before calling chooseGroups (not the one for - desktop meta_class) - (chooseGroups): compute the size of Miscellaneous - -2000-10-07 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-07 Pixel <pixel@mandrakesoft.com> - - * share/compssList: don't install locales-* even in 'all' install - (those files are usefull if RPM_INSTALL_LANG doesn't include that - lang) - -2000-10-07 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-07 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (install): log the gonna be installed packages (-> be - able to track not installed packages that should have been - installed) - -2000-10-06 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-06 dam's <damien@mandrakesoft.com> - - * netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf - (intro): connection detection improved : now use "ifconfig | grep interface" - (pppConfig): corrected cnx_up/down - -2000-10-06 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-06 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (afterInstallPackages): don't fail if - kdeglobals file is not there - - * share/compssUsers.desktop: fix icons - - * detect_devices.pm (cdroms): fix for scsi cdrom drives - - * pci_probing/pcitable: put cs46xx instead of snd-card-cs461x - (dixit jeff) - - * diskdrake.pm (Resize): comment ext2&reiserfs resizing for the - moment - -2000-10-06 Frederic Lepied <flepied@mandrakesoft.com> - - * Xconfigurator.pm (write_XF86Config): added mode of wacom devices - -2000-10-06 dam's <damien@mandrakesoft.com> - - * netconnect.pm (ask_connect_now): connection is now tested. - -2000-10-06 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps_gtk.pm: updated - license. - - * Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by - DRI, use only Mesa with Utah GLX, fixed autologin for avoiding - drakres and no wm available, moved Riva128 card from experimental - to stable, fixed presentations of text. - - * pci_probing/pcitable: fixed Cirrus Logic sound card. - -2000-10-06 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-06 François Pons <fpons@mandrakesoft.com> - - * install2.pm: fixed bad call to hasUsb... - - * share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep - 530, 620 and 6326 with XFree 4.0.1. - -2000-10-06 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-06 Pixel <pixel@mandrakesoft.com> - - * share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore - - * install_steps.pm (afterInstallPackages): put the Charset in - kdeglobals, otherwise kde uses charset iso8859-1 :( - - * lang.pm (charset): created - - * common.pm (update_userkderc): fix it, change the argument - passing - -2000-10-05 Pixel <pixel@mandrakesoft.com> - - * share/compssList: raise kde-i18n-*, should be installed whenever - kdebase is installed - - * pci_probing/pcitable: integrate patch from viet (concerns - sym53c8xx cards) - - * share/compssUsers: use "documentation" as the database icon - - * install_steps_interactive.pm (chooseGroups): fix to accept icons - not in the format "*_section.xpm" - - * install2.pm (miscellaneous): put yes/no in sysconfig/usb entries - -2000-10-05 dam's <damien@mandrakesoft.com> - - * netconnect.pm (adsl_conf): updated pppoe conf. - (main): added $netc->{minus_one} to avoid to count dhcp configured - eth when asking to share the connection. - (adsl-pppoe): improvement. Should work now. - (miscellaneous): corrected chmod 755 to 744 for connections scripts - - * netconnect.pm (main): network is stopped then started, instead - of restarted. - -2000-10-05 François Pons <fpons@mandrakesoft.com> - - * live_install: added icons (this fixes the yellow on white - tooltips problem). - - * install_any.pm: added ghostscript-utils in the list of packages - to copy when changing CD. - - * printerdrake.pm: install ghostscript-utils if a lexmark printer - is selected on cups. - -2000-10-05 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-05 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (loadO): look for auto_inst.cfg in /, not in - /Mandrake/base - -2000-10-05 François Pons <fpons@mandrakesoft.com> - - * netconnect.pm: fixed syntax error. - - * share/po/i18n_compssUsers: simplified version and fixed - dependancies to pkgs.pm (for building drakxtools). - -2000-10-04 François Pons <fpons@mandrakesoft.com> - - * install_gtk.pm: removed 80 pixel on height for live upgrade. - - * install_steps.pm: do not set keyboard when live upgrade after - setting the language. - - * install_steps_gtk.pm: fixed the trying to start a X server on - live. - -2000-10-04 Pixel <pixel@mandrakesoft.com> - - * share/po/i18n_compssUsers: fake module ``c'' so that no need to - build DrakX to use i18n_compssUsers - - * install_steps_interactive.pm (selectLanguage): update license - - * install_steps_gtk.pm (installPackages): add second license for - shitty soft (commercial one) - -2000-10-04 dam's <damien@mandrakesoft.com> - - * draknet (netconnect.pm and network.pm): various translations - corrected, network is restarted, buttons connect/disconnect - debugged. - -2000-10-04 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-04 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (main): kill prefdm instead of autologin - - * install_any.pm (find_root_parts): don't use - suggest_mount_points, it couldn't do what we wanted - (guess_mount_point): created, contains the common stuff between - suggest_mount_points and find_root_parts - -2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: fix some failing/untranslated i18n messages - - * share/po/fr.po: write translations according to drakgw - -2000-10-04 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: removed bad card for 3D Rage Pro. - - * install_any.pm: removed Aurora for SiS card, add more case for - detecting right cdrom for live upgrade, fixed wrong list of - packages for laptops. - - * c/stuff.xs.pm: added time interval of 200ms between update of - progression bar of install, make sure the last step is seen. - -2000-10-04 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-04 Pixel <pixel@mandrakesoft.com> - - * modules.pm (when_load): stricter regexp for $type is scsi or not - (so that scsi_mod with is scsi_raw doesn't get an alias - scsi_hostadapter) - - * detect_devices.pm (isLS120Drive): extend the regexp to include - "Caleb Technology - 144MB FDD UHD Floppy" - - * detect_devices.pm (burners, IDEburners): reworked, renamed, now - works! - * c/stuff.xs.pm (isBurner): created - - * modules.pm (load_ide): make sure ide-cd is loaded! - - * install_steps_interactive.pm (chooseGroups): the label and help - are now translated (at least will be), so use the translations - -2000-10-03 Pixel <pixel@mandrakesoft.com> - - * share/po/Makefile (DrakX.pot): added the to-be-translated from - compssUsers - * share/po/i18n_compssUsers: read the compssUsers's and output the - to-be-translated in po format - - * log.pm (l): log to STDERR instead of STDOUT - - * install_any.pm (loadO): use first floppy drive available (won't - help much though, as stage1 doesn't follow this...) - -2000-10-03 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-03 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (autologin): don't propose autologin in - security > 3 - - * common.pm (availableRamMB): HACK HACK if i810 and memsize, - returns 127 - - * bootloader.pm (suggest): don't use grub if more than 800MB - -2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/validate.pl: create this tool - - * share/po/fr.po: fix many typos - - * share/po/fr.po: make compssUsers translation - -2000-10-03 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator_consts.pm: changed resolution allocation. - - * fs.pm: removed no more used log. - - * install2.pm: add exit button if live upgrade. - - * install_any.pm: increased minimal available size to 65Mb. - - * install_steps.pm, standalone/printerdrake: fixed cups to CUPS - for mode. - - * printerdrake.pm: fixed not_edit for lpr mode of printerdrake. - - * share/Cards+: fixed Savage2000 entry. - -2000-10-03 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-03 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: updated bad card with Rage Mobility card. - - * live_install: added test of root user, abort if not root. - -2000-10-03 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/po/fr.po: fixed bug #518 and fixed other misc errors - -2000-10-03 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-10-02 François Pons <fpons@mandrakesoft.com> - - * diskdrake.pm (Resize): fix to make ext2resizing work a little - better - - * install_steps.pm: fixed installation of urpmi configuration. - - * detect_devices.pm: updated comment about UltraDMA66/100 - management. - - * modules.pm: updated comment about UltraDMA66/100 management. - - * diskdrake.pm: adding a cylinder for the minimum of the resize - and if there is nothing to do for resize, simply return. - - * install_any.pm: added missing require pkgs. - -2000-10-02 Pixel <pixel@mandrakesoft.com> - - * many files: remove many lnx4win special cases which are not - needed anymore - - * any.pm (addUsers): grpuser output goes to Mr Dave - - * bootloader.pm (install_lilo): change the default color of menu - - * install_steps_interactive.pm (choosePackages): add 300MB choice - in desktop - - * mouse.pm (fullnames): fix i18n fix - - * install_steps.pm (miscellaneous): don't add ide2=0x... for - ultra66 (otherwise chmouel is not happy, so is hdc being hde) - - * Xconfigurator.pm (main): add handling of icewm logout - - * c/stuff.xs.pm: changed the stepping of "Progressing installing package" - -2000-10-02 dam's <damien@mandrakesoft.com> - - * netconnect.pm (main): infos are written only when needed. - * netconnect.pm (intro): connection checking now works. - -2000-10-02 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like - jeff request. - -2000-09-30 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-30 dam's <damien@mandrakesoft.com> - - * netconnect.pm: a LOT of bugs fixed. draknet is now completely - brok^H^H^H^Hfrozen. - -2000-09-29 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-29 dam's <damien@mandrakesoft.com> - - * netconnect.pm (adsl_conf): dhcp should better work. - - * network.pm (configureNetwork): remove connection script if a - gateway is given. - - * common.pm (setVarsInShMode): created. chmod the file with - permissions passed in argument. - -2000-09-29 François Pons <fpons@mandrakesoft.com> - - * modules.pm (load): fixed when standalone, use modprobe. - - * pkgs.pm: added preference for wu-ftpd. - - * detect_devices.pm: added code to proble USB printer. - - * printer.pm: fixed missing PRINTER=yes on CUPS configuration for - USB printer. - - * install_steps.pm: removed possibilty to add an user in urpmi - group (jloup). - - * install_steps_interactive.pm: log if CD not ejectable. - -2000-09-29 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: sync with latest packages - - * install_steps_interactive.pm (selectLanguage($)): s/42/43/ in - MandrakeSoft physical address - -2000-09-29 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-29 dam's <damien@mandrakesoft.com> - - * netconnect.pm (intro): detection of internet - configuration/connexion state. - - * network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf - -2000-09-28 Pixel <pixel@mandrakesoft.com> - - * modules.pm (load_thiskind): add read_already_loaded cuz of - pcmcia - -2000-09-28 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: add nasty DrakSync and DrakProfile with 50 0 50 - -2000-09-28 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): the minimum is 25 - in beginner, not 10 - - * pkgs.pm (readCompssUsers): fix reading description - - * install_steps.pm (afterInstallPackages): remove the code to - handle RPM-GPG-KEYS - -2000-09-28 dam's <damien@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_list_with_helpW): no more theme - parsing, no more draknet.rc - - * netconnect.pm (read_net_conf): no adsl tree anymore. - - * netconnect.pm: drakgw called if enough card are installed. - - * netconnect.pm: minor bugs correction. - -2000-09-28 François Pons <fpons@mandrakesoft.com> - - * Makefile.config: added livedrake for drakxtools. - * diskdrake.pm: use corrected partition size when resizing a dos - partition (like the others). - * install_any.pm: no more pnm2ppa packages and others in package - to copy when changing CD. - * live_install: exec live_install2 instead. - * live_install2: contains post live upgrade stuff now. - * printerdrake.pm: protect set_help() usage by if $::isInstall, - removed reference to package pnm2ppa and others. - * standalone/livedrake: initial release for drakxtools. - -2000-09-28 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-28 Pixel <pixel@mandrakesoft.com> - - * install_interactive.pm (partitionWizardSolutions): fix the limit - cases for lnx4win - - * share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation - -2000-09-27 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): set $size2install - to $availableC in desktop install, as it should be - - * install2.pm (choosePackages): remove the code for removing kdesu - in high security... - - * install_steps_interactive.pm (createBootdisk): format more - nicely the text - - * install_steps_gtk.pm (installPackages): add 10 seconds to have a - better estimation - - * install_steps_interactive.pm (chooseGroups): now returns a boolean - (choosePackages): use chooseGroups return value to redo - choosePackages - - * install_steps_gtk.pm (selectMouse): if mouse type is none, then - don't test! - - * Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom - - * various: replace all Rescue by Update - - * pkgs.pm (readCompssUsers): read description for groups - - * install_steps_interactive.pm (chooseGroups): add description for - groups - -2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssUsers.desktop: added description - - * share/compssUsers: added description - - * share/compssUsers.desktop: added icon support, reordered, - renamed - - * share/compssUsers: reordered, renamed - -2000-09-27 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-27 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectLanguage): intregrate - license again - - * pkgs.pm (readCompssUsers): reads compssUsers.meta_class - - * diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/'' - (as should be) - - * install_steps_gtk.pm (selectInstallClass1): if @$l (list of - install classes) contains only one element, call - install_steps_interactive::selectInstallClass1 - - * install_steps_interactive.pm (choosePartitionsToFormat): fix for - "no partitions selected to format" - - * my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie - -2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com> - - * share/compssList: more for gnupg, -11 for sucking things, - changed compss-groups to be less than 70. - - * share/compssUsers: modified compssUsers with Warly, added - compssUsers.desktop, simplified for KD (now uses Graphical - Desktop/KDE instead of listing all relevant packages) - -2000-09-27 dam's <damien@mandrakesoft.com> - - * netconnect.pm (get_info_adsl_providers, read_adsl_providers): - Created. adsl provider tree. - (set_net_conf): better informations storing. - - * my_gtk.pm (new): windows are always centered if standalone. - -2000-09-27 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed - 3D hw acceleration for i815 (VideoRam). prefer XF3 for all - NeoMagic cards. - * install_gtk.pm: re-enabled themes on live upgrade but without - modifying background image. - * install_steps_gtk.pm: fixed missing help. - * live_install: lot of fixes to enable DrakX font, keep upgraded - system clean (libperl.so which allows graphical login). - * pkgs.pm: added function allowedToUpgrade to filter kernel - package. - -2000-09-27 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-27 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (configureX): if `clicked' don't go - to auto mode - - * Xconfigurator.pm (monitorConfiguration): fix the translated - 'Generic' which is not so (and must not be so) anymore - -2000-09-26 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm: remove all Unskip code - - * my_gtk.pm (_create_window): add shortcut alt-e to switch to - expert - - * Xconfigurator.pm (resolutionsConfiguration): fix for setting - legal resolution - - * install_steps_interactive.pm (selectLanguage): use formatAlaTeX - on the license - -2000-09-26 François Pons <fpons@mandrakesoft.com> - - * fs.pm: added mounting of swap partition when mounting them - all (this can help :-) - * pkgs.pm: fixed correction size code to make (really) a true - bijection between corrected and rpm size. - -2000-09-26 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-26 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectLanguage): integrate the - license (temporary one) - - * modules.pm (write_conf): fix the /etc/modules generation - - * interactive_gtk.pm (ask_many_from_listW): if more than 5 entries - in icon format, use scrollbar. In non-icon format, use scrollbar - for more than 11 entries. - - * commands.pm (bug): add ddcxinfos - - * pci_probing/pcitable: replace tulip by de4x5 for 2104x cards - -2000-09-26 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added more 3D Rage Pro card for 3D - acceleration with Utah-GLX (Rage Mobility, Rage XC/XL), - modified identification for checking acceleration. - * install_any.pm: added automatic installation (up 60) for - OpenGL games if a graphic card MAY BE accelerated. - * live_install: fixed perl idioms in pure shell script and added - packdrake symlink if not already installed. - * share/compssList: changed level to -1 for all needing 3D hw - acceleration packages. - -2000-09-26 dam's <damien@mandrakesoft.com> - - * network.pm (write_resolv_conf): write temp dns line to be used - with new initscripts package. Use to set dns live. - -2000-09-26 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-26 Pixel <pixel@mandrakesoft.com> - - * mouse.pm (read): catch exception if fullname2mouse fails (eg: - old FULLNAME format) - -2000-09-25 Pixel <pixel@mandrakesoft.com> - - * share/MonitorsDB: merge with latest redhat MonitorsDB - - * pci_probing/pcitable: major merge with latest redhat pcitable - - * share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to - "Rage 128", added "Rage 128 Mobility" - - * install_any.pm (getAvailableSpace): keep 10% of free space on - big partitions - - * Xconfigurator.pm (readMonitorsDB): don't translate Generic - (otherwise, only a part is translated, see MonitorsDB for the - non-translated part) - - * interactive.pm (ask_many_from_list): fix sorting - - * install_gtk.pm (test_mouse): smaller box to fit in 640x480 - - * install_steps.pm (afterInstallPackages, beforeInstallPackages): - RPM-GPG-KEYS is copied before installing packages - - * pkgs.pm (readCompssUsers): handle icons in compssUsers - - * common.pm (truncate_list): ensure the list is not too big - - * install_steps_gtk.pm (choosePackagesTree): restrict the list to - 20 elements if it is too big (use truncate_list) - -2000-09-25 François Pons <fpons@mandrakesoft.com> - - * bootloader.pm: add Video mode for entry. - * fs.pm: updated for live upgrade. - * install2.pm: dropped unuseful steps filtering. - * install_any.pm: fixed wrong Device3Dfx package name and clean - postinstall rpms directory on upgrade before filling it. - * install_gtk.pm: removed window restrictions of live upgrade. - * install_steps.pm: fixed initrd symlink following in case of - upgrade. - * install_steps_gtk.pm, install_steps_interactive.pm: keep always - upgrade on live upgrade. - * modules.pm: may fixed pcmcia lost driver (typically on network). - * pkgs.pm: fixed (uggly?) usage of floating perl data on perl - script :-) - * printer.pm: back to "Generic PostScript" for default printer (jloup). - * printerdrake.pm: make sure an expert can choose among available - devices. - -2000-09-25 dam's <damien@mandrakesoft.com> - - * network.pm (write_resolv_conf): write '# ppp temp entry adsl' in - /etc/resolv.conf if needed. - - * netconnect.pm : adsl connection does'nt need any dns anymore. - - * netconnect.pm (read_net_conf): created. draknet now stores and - reload the config. - - * netconnect.pm (main): if the user is french and uses french - keyboard, don't ask his country. - -2000-09-25 Pixel <pixel@mandrakesoft.com> - - * modules.pm: added 8139too - - * share/Cards+: GeForce2 DDR is handled by driver "nv" - - * Xconfigurator.pm (main): in killall X for Xdrakres, also killall - kdm/xdm/gdm/autologin :) - -2000-09-25 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-25 dam's <damien@mandrakesoft.com> - - * network.pm (configureNetwork): Warn user if he already - configured the interface. - -2000-09-24 Pixel <pixel@mandrakesoft.com> - - * modules.pm (mergein_conf): created. call read_conf, fills - %modules::conf and set $modules::scsi - -2000-09-24 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit - -2000-09-24 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-24 Pixel <pixel@mandrakesoft.com> - - * commands.pm (bug): use first floppy drive instead of fd0 hard - coded (nice for LS120's) - - * install_steps_gtk.pm (selectMouse): if device changed, do the - test - * standalone/mousedrake: fix for serial mice - * install_steps_interactive.pm (selectMouse): fix for serial mice - -2000-09-23 dam's <damien@mandrakesoft.com> - - * netconnect.pm (conf_network_card): now displays the modules of - detected ethernet cards. - -2000-09-22 dam's <damien@mandrakesoft.com> - - * netconnect.pm (main): calls drakegw. - * netconnect.pm (get_net_device): fixed - -2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: - - added logs - - added verbose mode - - fixed wrong stopping of named in other languages than english - - * netconnect.pm (get_net_device): try to fix it.. - -2000-09-22 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectKeyboard, - choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list - (): - - * interactive.pm (ask_many_from_list): now only ask_many_from_list - exists, obsoleting ask_many_from_list_ref and - ask_many_from_list_with_help. More flexible and nicer - * interactive_newt.pm (ask_many_from_listW): adapted to new - calling type - * interactive_gtk.pm (ask_many_from_listW): adapted to new calling - type, handle 'shadow' and 'icon2f' - -2000-09-22 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win} - - * Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for - i810 - (testFinalConfig): i810 is a verybad_card, aka can't test anything - on it :-( - (main): fork to background and stay there while waiting for the WM - to exit - (testFinalConfig): update the backgroung image path - - * interactive_gtk.pm (exit): flush X before leaving (otherwise the - mousecursor is not restored) - - * run_program.pm (rooted): don't redirect the stdout and stderr to - ddebug.log if not $::isInstall - - * log.pm (l): log on stdout/stderr if !isInstall and !isStandalone - - * modules.pm (load_raw): redirect stderr to tty5 - - * install2.pm (main): set variable $::isInstall - -2000-09-22 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/drakgw: now includes information from netconnect to - ignore the interface used for Internet connection - -2000-09-22 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm (selectInstallClass1): pixel's typo. - - * netconnect.pm (get_net_device): added get_net_device to know - which interface has been used to configure the internet connection. - (conf_network_card): ask to restart network if dhcp too. - (main): enable dialing when modem. - - * network.pm (configureNetworkIntf): changed label to warn people - about already configured eth cards. - -2000-09-22 François Pons <fpons@mandrakesoft.com> - - * install_gtk.pm: added Desktop themes. - * share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png: - initial release. - * install2.pm: moved back to all steps for live upgrade. - * install_gtk.pm: select right logo if desktop. - * install_steps_interactive, install_steps_gtk.pm: avoid asking if - upgrade for a live upgrade. - -2000-09-22 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm: add some call to log_sizes to log the - installed size - - * install_steps_gtk.pm (installPackages): beep before changeMedium - -2000-09-21 Pixel <pixel@mandrakesoft.com> - - * interactive.pm (ask_from_listf): try to call the f translation - function on the default value with the index - - * install_steps.pm (afterInstallPackages): make the gpg code work, - changed the call to - "gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS" - - * detect_devices.pm: cleanup and removed unused code - -2000-09-21 Guillaume Cottenceau <gc@mandrakesoft.com> - - * detect_devices.pm (getNet()): really remove plip in standalone - -2000-09-21 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm, netconnect.pm: changed NETWORKING reference - from false to no. - * printer.pm: changed timeout from 30 to 60. - * printerdrake.pm: added wait message when waiting for cups to - start. - * pci_probing/pcitable: added erwan VIA Rhine board. - * network.pm: added DHCP_HOSTNAME reference. - -2000-09-21 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-21 Pixel <pixel@mandrakesoft.com> - - * standalone/keyboarddrake: fix for XF4 - - * Xconfigurator.pm (write_XF86Config): comment the omit - xfree86-dga - - * install_steps.pm (afterInstallPackages): configure GPG public - keyring with mandrake key - - * standalone/mousedrake: updated/fixed for new mouse handling - - * install2.pm (main): update for handling oem installs - - * many files: relGetFile cleanup, updated calls to getFile and - getAndSaveFile accordingly - - * Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg - - * detect_devices.pm (@netdevices): plip removed in standalone, - otherwise plip is always there (because of kmod) - - * install_steps_interactive.pm (choosePartitionsToFormat): replace - the die "cancel" by die "already displayed", so that no error is - displayed. - - * pci_probing/pcitable: replace some rtl8139 by 8139too, added - cards DELTA8139 and ADDTRON8139 (for jeff) - - * Xconfigurator.pm (show_info): also show the colordepth and - resolution. don't show server if none, show XF4 driver if there's - one. - (main): change the "Forget the changes" to "Keep the changes?" - with displaying the current configuration. - -2000-09-21 François Pons <fpons@mandrakesoft.com> - - * printer.pm: changed "PostScript" ppd default description to "Raw - queue (no filtering)", asked by Till. - * Xconfigurator.pm: add log of what user select for 3D hw - acceleration. - * share/compssList: changed XFree86-glide-module to -2 because the - level is the same for XFree86-Glide* which may have multiple - different version installed due to dependancies of the first one. - -2000-09-21 dam's <damien@mandrakesoft.com> - - * netconnect.pm (conf_network_card): added check when dhcp. Cable connection - should now work. - -2000-09-21 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-21 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (exitInstall): call $o->exit if - "Some steps are not completed" - -2000-09-20 Pixel <pixel@mandrakesoft.com> - - * bootloader.pm (install_loadlin_config_sys, - install_loadlin_desktop): extracted from install_loadlin, do not - call them anymore (remove it?) - (suggest): put grub in lnx4win install - - * common.pm (availableRamMB): fixed (round to a multiple of 4) - -2000-09-20 dam's <damien@mandrakesoft.com> - - * netconnect.pm (get_info_isdn_providers & read_isdn_providers): - read file in /usr/share and $prefix/usr/share - (isdn_write_config): corrected file to be sh compliant. - (isdn_write_config): added default route settings for isdn. - -2000-09-20 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-20 Pixel <pixel@mandrakesoft.com> - - * pci_probing/pcitable: replace es1371 by snd-card-ens1371 - -2000-09-20 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume - -2000-09-20 Guillaume Cottenceau <gc@mandrakesoft.com> - - * standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume - - * standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume - -2000-09-20 dam's <damien@mandrakesoft.com> - - * standalone/draknet: used new package install function. - -2000-09-20 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (isFloppyOrHD): detects wether a device is a - floppy or not based on its size (for scsi floppy) - - * Xconfigurator.pm (testFinalConfig): check if "server" OR - "driver" field is set (otherwise XF4 only card won't pass) - - * bootloader.pm (suggest): fix for ``installing the last cooker - from kenobi:/I on an smp machine i don't get anymore an entry for - linux-up'' (c chmouel) - -2000-09-20 dam's <damien@mandrakesoft.com> - - * netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0]) - -2000-09-20 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-19 Pixel <pixel@mandrakesoft.com> - - * modules.pm (get_pcmcia_devices): fix (especially, now ethernet - should be detected) - - * lang.pm (get_langs): created, gives rpm install langs - * install_any.pm (setPackages): give langs::get_langs() to - readCompssList - * pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given - $langs instead. This fixes the RPM_INSTALL_LANG=all install. - -2000-09-19 Pablo Saratxaga <pablo@mandrakesoft.com> - - * netconnect.pm: make dhcp-client, pump and such not translatable. - Those are program names and should therefore not be translated, - that only confuses translators - -2000-09-19 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm (autologin): corrected @users definition and - passwd cat. - -2000-09-19 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-19 Pixel <pixel@mandrakesoft.com> - - * many files: changed some access to get_root to get_root_ - - * install_steps_interactive.pm (choosePackages): added code for - desktop meta_class install type - - * install_steps_gtk.pm (selectMouse): cleanup, give parameter - emulate3buttons to setMouseLive - * c/stuff.xs.pm (setMouseLive): add argument emulate3buttons - -2000-09-19 Guillaume Cottenceau <gc@mandrakesoft.com> - - * interactive*.pm: changed `suspend' and `resume' to behave as expected, - added `enter_console' and `leave_console' - -2000-09-19 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-19 Pixel <pixel@mandrakesoft.com> - - * install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by - META_CLASS - - * Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false - result (not enough VideoRam), also remove the found resolutions - * Xconfigurator.pm (main): remove the automatic searching of - resolutions - * Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the - automatic searching of resolutions. - - * mouse.pm (fullnames): changed the `_' in `[' before Other - (nicer, uh?) - - * install2.pm (selectMouse): changed clicked to !first_time - -2000-09-19 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-19 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (testFinalConfig): remove the bloody prototype - -2000-09-19 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-18 Dam's <damien@mandrakesoft.com> - - * Xconfigurator (autologin): do it eve, if newbie. Autologin is - now in separated function. - -2000-09-18 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (testFinalConfig): don't skip the test in auto - if called via "Test again" - * Xconfigurator.pm (resolutionsConfiguration): ensure all depth - are bounded - - * bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is - classic and no-fb - - * fsedit.pm (check_mntpoint): add a check for /etc /lib... which - must not be mount points. Also check that /home, /tmp and /usr are - on trueFS - - * interactive.pm (ask_from_entries_ref): add bounding of "val" in - case of type "range". die if min > max. - -2000-09-18 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-18 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): nicer - partition/device display - - * partition_table_raw.pm (zero_MBR): add on the fly require of the - good partition_table_$type - - * detect_devices.pm (cdroms): fix (yet again) the scd$nb device - assignment to ide burners - - * install_steps.pm (afterInstallPackages): comment out a part of - the icons mess messing - - * Xconfigurator.pm (cardConfiguration): move Unlisted to - Other/Unlisted - * share/CardsNames: updated (for Voodoo5) - - * install_steps_gtk.pm (selectMouse): fix the test to know wether - the guy has changed the mouse type (to know wether to test the - mouse or not) - - * install_steps_interactive.pm (selectLanguage): add the license - - * install_steps_interactive.pm (choosePackages): have the - "Recommended" size be the default - (in the choice Minimum/Recommanded/Complete) - - * diskdrake.pm (Type): fix a typo - - * install_steps.pm (doPartitionDisksAfter): mark partition as - mounted - -2000-09-17 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-17 Pixel <pixel@mandrakesoft.com> - - * install/pcmcia_config.patch: cleaned - - * diskdrake.pm (Create, Type): have type field not_editable - - * tools/make_mdkinst_stage2: use TMPDIR if available - -2000-09-16 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): move - the setting of toFormat before asking for bad blocks, seems to fix - things?? weird :-/ - - * network.pm (miscellaneousNetwork): fix the setting of focus on - error (tx2Thomas Poindessous :) - - * install_steps_interactive.pm (configurePrinter): changed - "Cancel" to "None" (for Thomas Poindessous :) - - * printer.pm (poll_ppd_base): max polling time raised from 10s to - 30s (for Till) - - * install_steps.pm (ask_mntpoint_s): don't force partition type to - be ext2 (at least if it's a known fs) (for Warly) - -2000-09-15 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-15 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (set_help): save the help message displayed - in $o->{current_help} - * install_gtk.pm (create_big_help): display $o->{current_help} - - * mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice. - * install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm - * install2.pm (selectMouse): adapted for mouse::read now returning - an hash ref - - * detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in - one function (now takes the device in the parameter) - - * interactive.pm (ask_from_treelistf): added (just like - ask_from_listf, but with a tree) - - * Xconfigurator.pm: the reference is now nbuttons to - know wether to put Emulate3Buttons or ZAxisMapping. - * Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on - Banshee too. - - * Xconfig.pm: guess nbuttons based on Emulate3Buttons and - ZAxisMapping. - - * common.pm (availableRamMB): replace availableRam, now use the - size of /proc/kcore (what else to find the real ramsize?) - - * common.pm (cat__): created - - * install2.pm (main): add field meta_class in $o. Can be - 'desktop', in case option desktop is given, or if /desktop/i is - found in /VERSION - - * install_steps.pm (miscellaneous): for lnx4win, always have - 'mem=' (so that the initrd is visible by both windows - - * install2.pm (main): add option "desktop" - - * install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format - - * install_interactive.pm (partitionWizardSolutions): - use only TrueFS for existing_part - (partitionWizard): have only "loopback" for lnx4win - - * pci_probing/pcitable: associate Voodoo5 with Voodoo5 - - * share/Cards+: add Voodoo5 - - * bootloader.pm (suggest): add entry linux-nonfb (called linux-up - for smp) - -2000-09-14 DrakX <install@mandrakesoft.com> - - * snapshot uploaded - -2000-09-12 François Pons <fpons@mandrakesoft.com> - - * detect_devices.pm, mouse.pm: moved probing serial port before to - detect a wacom tablet (even if a PS/2 or USB mouse is found). - * help.pm: corrected reference to previous version of LM (jloup). - * install2.pm: removed duplicate code for getting network - configuration, using network module. - * netconnect.pm: intf is now a hash and no more an array. - * network.pm: changed nature of intf to hash from array, reworked - write_resolv_conf function to keep old code in comment but only - when not used anymore (to make it easier by hand modification). - * printer.pm: SOCKET accessible to expert only (jloup). - * printerdrake.pm: local port only available for expert if a - printer has been detected (jloup). - -2000-09-11 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: reorganized choices of 3D optimizations, added - experimental support for expert users. - * install_steps_interactive.pm: removed question to keep XF3. - -2000-09-05 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: removed all previous URI specific mode and - added socket and expert URI general mode. - * printer.pm: fixed bugs, start lo interface before cups. - -2000-09-04 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: added pnm2ppa and lm110 support in cups - configuration. probe for printer device (parallel) and try to - install usb for printer. - * printer.pm: removed local printer configuration for cups (keep - only local configuration using URI). - -2000-09-01 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3 - is installed, make 16bits by default on 3D hardware acceleration, - fixed selection of hardware for hardware acceleration. - * install_steps.pm: add cups for printer configuration, used for - auto_install. added new function to add packages only if requires - are already satisfied. - * standalone/printerdrake: updated. - -2000-08-31 dam's <damien@mandrakesoft.com> - - * moved many things to network.pm and any.pm - * everything should be broken now. - -2000-08-31 François Pons <fpons@mandrakesoft.com> - - * install2.pm: removed printer default config (now obsoleted). - * install_steps_interactive.pm: add cups support. - * printerdrake.pm: add cups support. - * printer.pm: add cups support. - -2000-08-31 Frederic Lepied <flepied@mandrakesoft.com> - - * install_any.pm (setPackages): install the right glide module - according to the Voodoo card detected. - - * Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4. - (autoDefaultDepth): default depth to 16 for Voodoo cards except - for Voodo5 ones. - -2000-08-29 dam's <damien@mandrakesoft.com> - - * moved pppConfig in netconnect.pm and any.pm - * moved miscellaneousNetwork in any - * modem configuration is now useable in standalone mode. - -2000-08-29 David BAUDENS <baudens@mandrakesoft.com> - - * install_steps_interactive.pm: change Small/Normal/Full -> - Minimum/Recommanded/Complete (aka make FredB happy) - -2000-08-28 dam's <damien@mandrakesoft.com> - - * draknet (netconnect): renamed drakfuck -> draknet. standard ADSL - and french alcatel ADSL implemented. - * Xconfigurator.pm (autologin) : use of the new autologin system. - -2000-08-24 François Pons <fpons@mandrakesoft.com> - - * ../update_kernel*: changed reference from extract_archive to - packadrake. - * Makefile*: added live_install and live_install2. - * Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage - Pro AGP card type, commented SiS and S3ViRGE support by GLX. - * commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*: - updated to use packdrake now. - * install2.pm, install_steps.pm, install_steps_gtk, Makefile*: - manage live upgrade. - * modules.pm: use standard modprobe command for load in live - upgrade. - * netconnect.pm: added minimal modification for being compilable. - * rescue/list: added packdrake and sfdisk. - * live_install, live_install2: live upgrade of package. - -2000-08-22 dam's <damien@mandrakesoft.com> - - * drakfuck (netconnect):finished isdn PCI/ISA card implemetation - * added isdndb.net: providers database - -2000-08-20 dam's <damien@mandrakesoft.com> - - * moved Netconnect.pm to netconnect.pm - * moved DrakFuck to drakfuck - -2000-08-18 Pixel <pixel@mandrakesoft.com> - - * share/Cards+: for i810, force VideoRam - -2000-08-18 dam's <damien@mandrakesoft.com> - - * modules.pm: added isdn type in @drivers_by_category. corrected - load_thiskind (thx pixel) : it's not unsafe anymore - * Netconnect.pm: just display PCI isdn card recognized. - -2000-08-17 Pixel <pixel@mandrakesoft.com> - - * install_any.pm: many cleanup. moved some functions to common, - any or install_interactive (newly created) - -2000-08-16 dam's <damien@mandrakesoft.com> - - * install_steps_interactive.pm(configureNetwork): added call to - isdn configuration - * added standalone/DrakFuck: standalone entry point to configure - internet connexion. - * added Netconnect.pm: internet connexion functions. - -2000-08-11 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectInstallClass): yet a bigger - warning so that people don't choose expert installs. Also set the - focus on "Custom" by default. - - * install_steps_interactive.pm (doPartitionDisks): created, calls - the wizard. - * install_steps.pm (doPartitionDisksBefore, - doPartitionDisksAfter): created (was mainly in - install2::doPartitionDisks) - * install2.pm (doPartitionDisks): much cleanup - * install_any.pm (partitionWizard): working state (still rough) - -2000-08-08 Pixel <pixel@mandrakesoft.com> - - * standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the - cdrom addmedia - -2000-08-07 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Resize): - * install_steps_gtk.pm (doPartitionDisks): remove the - before_leaving ensuring the filehandle is closed - * resize_fat/main.pm (DESTROY): use a better solution for ensuring - the filehandle is closed - -2000-08-07 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added SiS6326 in the list of chipset that - needVideoRam, reported on ml. - * install_steps.pm: fixed auto install of printer. - -2000-08-06 Pixel <pixel@mandrakesoft.com> - - * interactive.pm (ask_from_listf): created this GREAT function - that should have been created a long time ago. - * any.pm, install_any.pm, install_steps_gtk.pm, - install_steps_interactive.pm: a lot of rewrite to use the new - ask_from_listf, a lot of nice cleanup! - - * fs.pm (df): created, returns the free space of the part. Save it - in $part->{free} - - * install_steps_gtk.pm (doPartitionDisks): ensure the closing of - the device in case of error - * resize_fat/main.pm (new): ensure the closing of the device in - case of error - - * install_any.pm (partitionWizard): the great partitioning wizard - is created. Not finished yet (nor called from anywhere) - - * install_steps.pm (doPartitionDisksLnx4win): created function out - of doPartitionDisks - - * install_steps_gtk.pm (installPackages): removed the displaying - of size to install (people are bothered cuz not the same size) - -2000-08-06 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm (create_steps_window): use drawing area - instead of button. Implemented all steps events. - -2000-08-05 Pixel <pixel@mandrakesoft.com> - - * mouse.pm (detect): test a hack for usb mouse via hub - (sparhawk@enteract.com) - - * fsedit.pm (undo): force isDirty and needKernelReread only if hd - hasBeenDirty, otherwise believe the flag saved - * partition_table.pm (write): flag hd as hasBeenDirty - - * install2.pm: a few renaming of methods so that the step names - correspond to install2 function and install_steps* methods (eg: - configureX & setupXfree unified to configureX) - -2000-08-04 dam's <damien@mandrakesoft.com> - - * any.pm (setAutoLogin): added this method to write xdm-config - * Xconfigurator.pm: clenead autologin code and use of above method - -2000-08-04 Pixel <pixel@mandrakesoft.com> - - * pkgs.pm (setSelectedFromCompssList): save $nb to able to restore - it in case of max_size reached. only purpose is the log! - - * install_steps_interactive.pm (choosePackages): in newbie, ask - between Small/Medium/Full install - * install_steps_interactive.pm (choosePackages): in expert, have - the min_mark be 0 instead of 1 - - * common.pm (find_index): added this nice function - - * install_any.pm (getAvailableSpace_mounted): use common::df - * loopback.pm (getFree): use common::df - * commands.pm (df): use common::df - * common.pm (df): added - - * diskdrake.pm (Resize)): add resizing of reiserfs - * share/list.i386: add resize_reiserfs - - -2000-08-02 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm : autologin is functionall. When wmsession.d is - more up to date, I'll add the list of wm to launch at boot. It - writes in /etc/X11/xdm/xdm-config. - -2000-08-01 Pixel <pixel@mandrakesoft.com> - - * install2.pm (miscellaneous): modify as chmouel want (aka, "" - instead of "no" for MOUSE and KEYBOARD in sysconfig/usb) - - * services.pm: separation between interaction and action. - * install_steps.pm (servicesConfig): the job is now done here - * install_steps_interactive.pm (servicesConfig): only the asking - part - -2000-08-01 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed the below fixe, now ok. - * Xconfigurator.pm: fixed a bug for using default card flags - setting, add support for GeForce DDR for both 3.3 and 4.0. - * pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use - XFree 3.3 as unsupported in XFree 4.0. - * share/Cards+: added "NVIDIA GeForce2 DDR (generic)". - -2000-07-31 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: fixed provided package with choice in deps used with a - base package, complicated but kernel-fb or similar can be - unselected now. - -2000-07-27 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: changed expert message to ask - using XFree 3.3 instead of XFree 4.0 used by default (server). - * Xconfigurator.pm: make sure only one server is installed, - default to XFree 4.0 if supported unless XFree 3.3 accept - 3D acceleration and not XFree 4.0, ask user in such case. - * pci_probing/pcitable: added Intel 815 pci ids. - -2000-07-26 dam's <damien@mandrakesoft.com> - - * install_steps_gtk.pm: applied new LN stars, logo title and help - logo. improved steps appearences. - * modified share/step-*.xpm - * added share/help.xpm - * updated ../HACKING to ling help logo. - -2000-07-21 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: enable 3D acceleration configuration with - XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3 - Utah-GLX accelerated module. - -2000-07-20 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: use {miscellaneous}{autologuser} instead of - {miscellaneous}{autologuser} + {miscellaneous}{autologing}. - * move some README content to ../HACKING - -2000-07-19 dam's <damien@mandrakesoft.com> - - * Xconfigurator.pm: added autologin boxes. - result is in {miscellaneous}{autologin} and in - {miscellaneous}{autologuser} - -2000-07-19 François Pons <fpons@mandrakesoft.com> - - * any.pm: added default root to existing root device when adding - an entry in bootloader. - * bootloader.pm: avoid duplicating entry (floppy and old-floppy) - when they are identical. - manage hackkernel by suggest an entry by default if installed. - * install_steps.pm: reworked symlink closure for bootloader - to keep previous configuration. - -2000-07-11 François Pons <fpons@mandrakesoft.com> - - * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm, - this include a configure_entry from silo.pm to build a initrd if - used. - * share/compssList: added kde2 packages. - * share/compssUsers: added kde2 group, renamed kde to kde1 group - specific. - -2000-07-07 François Pons <fpons@mandrakesoft.com> - - * install2.pm (choosePackages): always execute setPackage to copy - hdlist* and depslist files (support mixed partitionDisks and - choosePackages). - * install_any.pm (setPackages): avoid clearing upgrade flag. - * install_steps.pm (choosePackages): use $first_time to avoid - reselection of packages according to compssList. - * install_steps_interactive (choosePackages): use $first_time and - $individual to avoid reselection of packages according if user go - back to step choosePackages. - * pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and - depslist files in /var/lib/urpmi. - * diskdrake.pm: fixed uneditable combo for Mount point action. - -2000-06-23 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: better approach for Sun* server in newbie. - * fs.pm: added romfs support for mount. - * fsedit.pm: changed auto allocation for partitions for sparc*. - * install2.pm: restored bootdisk creation and auto install boot - disk creation for sparc*. - * install_any.pm: changed vfat to romfs when mounting kickstart - floppy on sparc*. - * install_steps.pm: avoid proposing formating sunos partition. - * install_steps_interactive.pm: boot disk for sparc* and support for - installation of SILO on /boot partition (sparc*). - * install_steps_newt.pm: removed cylinder 0 bug warning. - * interactive.pm: fixed typo for not_edit set to 1 by default. - * partition_table.pm: fixed get_holes on sparc* where a whole disk - partition caused problems. - * partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs. - * silo.pm: handle /boot partition, install silo.conf in /boot and - make a symlink from /etc. - * share/list.sparc: added losetup and genromfs for boot disk creation. - -2000-06-21 Pablo Saratxaga <pablo@mandrakesoft.com> - - * lang.pm: changed the way console font data is written; not all - of the [0], [1], [2] values must defined, so three cases must be used. - Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then - be used by console-tools to load the proper compose table - -2000-06-20 François Pons <fpons@mandrakesoft.com> - - * c/sbus.c: added some functions for silo.c integration. - * c/silo.c: initial release including write in prom, and translation - of disk name from openprom to linux, rh version modified. - * silo.pm: added write in prom, support of sunos boot from silo. - * partition_table.pm: added support for ufs partition like windows one. - * install_steps_interactive.pm: added other entries in silo. - * install_steps.pm: support sunos partition. - * install_any.pm: automatically mount sunos partition with diskdrake. - * fsedit.pm: added /mnt/sunos suggested mount point. - * fs.pm: added ufs support for mount. - -2000-06-19 François Pons <fpons@mandrakesoft.com> - - * crypto.pm: modified for getting sparc crypto file for sparc*. - * modules.pm: make sure to load sd_mod when needed. - * pci_probing/main.pm: always use loaw_endian in pci structs. - * pci_probing/translate-pcitable.pl: added arch specific module name - translation. - -2000-06-16 Pixel <pixel@mandrakesoft.com> - - * modules.pm (write_conf): rename conf.modules to modules.conf if - needed. Outputs to modules.conf - - * detect_devices.pm (cdroms): fix using scd0 for ide-burners when - already a scsi cdrom drive - -2000-06-13 Pablo Saratxaga <pablo@mandrakesoft.com> - - * pkgs.pm: added 'acon' requirement for all right-to-left languages - -2000-06-07 François Pons <fpons@mandrakesoft.com> - - * diskdrake.pm: added SunOS partition as blue for diskdrake. - * install_steps_interactive.pm: make sure of no division by zero may - happen. - * install_steps_newt.pm: added WARNING for fdisk on sparc*. - * modules.pm: make sure of loading sd_mod module after any scsi module. - * sbus_probing/main.pm: insmod openprom before trying sbus probing. - * pkgs.pm: corrected by use of parabolic solution for size approximation. - * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe. - -2000-06-05 Pablo Saratxaga <pablo@mandrakesoft.com> - - * install_steps.pm,lang.pm: added load_console_font, to load the - proper console fonts (text mode install is not very useful otherwise) - -2000-06-03 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs - * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs - -2000-06-01 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font; - it fits better with the other fonts. Added a 'README' file with - some comments and the required copyright notice - -2000-05-29 François Pons <fpons@mandrakesoft.com> - - * Xconfigurator.pm: added support for SBUS card autodetection. - * commands.pm: added lssbus to list SBUS devices detected. - * detect_devices.pm: removed alpha restriction on USB. - * install_steps_interactive.pm: added SBUS support. - * c/sbus.c: initial revision, core SBUS support (inspired from kudzu). - * c/stuff.xs.pm: added wrapper for sbus.c interface. - * sbus_probing/main.pm: initial revision (inspired from kudzu). - -2000-05-27 Adam Lebsack <adam@mandrakesoft.com> - - * share/list.ppc: various PPC modifications, for HFS - * partition_table_mac.pm: bug fixes - * partition_table.pm: various HFS fixes, isHiddenMacPart() - * diskdrake.pm: added HFS to top buttons when run on PPC - * keyboard.pm: fixed name of mac-fr2-ext keymap - * install_steps_gtk.pm: added Xpmac server support for PPC. - * install_steps_interactive.pm: disallow hardware configuration on PPC for - now. All drivers should be in the kernel. setup_this_kind(). - * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match - our partition table read. Added PPC grep condition for PPC in get_visible_fstab. - * fs.pm: fix argument for HFS formatting. - * Makefile: special installation of PPC files. - -2000-05-25 Chmouel Boudjnah <chmouel@mandrakesoft.com> - - * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on - alpha|sparc. - -2000-05-25 François Pons <fpons@mandrakesoft.com> - - * silo.pm: added configure_entry to try creating an initrd for an image - entry in bootloader. fixed wrong usage of run_programm::rooted with 2>. - * commands.pm: fixed insmod command to take modules64.cz* on sparc* - * install2.pm: removed create boot disk and create auto install disk on - sparc*. force writing of /etc/conf.modules for step setupBootloader. - * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*. - * install_steps_interactive.pm: added missing $prefix for glob_. call - configure_entry in setupSILO. fixed cancel or None entry on setupBootloader. - * modules.pm: updated alias for sparc*. - * any.pm: fixed proprable wrong test for setupBootloader in beginner at - the very beginning. - * printer.pm: fixed typo. - * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and - resolution for these server too. - -2000-05-24 François Pons <fpons@mandrakesoft.com> - - * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*. - * partition_table_sun.pm: fixed a bug when reading partition table - with unused partition in the middle of the table. - -2000-05-23 François Pons <fpons@mandrakesoft.com> - - * common.pm: update arch to take into account sparc and sparc64. added - better_arch and compat_arch function. - * silo.pm: fixed adding new kernel automatically. - * install2.pm: removed create boot disk stuff for sparc*. - * install_steps.pm: added initrd generation for alpha. added ldconfig - at end of installation. removed /usr/bin/dumpkeys existence test on - sparc*, should be added in the future. - * install_steps_interactive.pm: removed supermount for sparc*. - * install_steps_gtk.pm: added /dev/kbd device creation and permedia2 - support for sparc*. removed screen limit of 1024x768. - * detect_devices.pm: fixed problem on machine with really no IDE interface. - * modules.pm: added support for 32 and 64 bit architectures on sparc*. - * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate - partition. - * pkgs.pm: added support for multi-arch rpm file (need for sparc*), - fixed correctSize and invCorrectSize to take back a linear approximation - above 9Gb approximatively. removed ftp rewind as broken currently. - * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed - globing (removed) against existing '*'. - * partition_table.pm: removed support for non SUN partition table, as it - may freeze the kernel or may be blanked? - * Xconfigurator.pm: take Sun24 server by default on sparc*, add support - for permedia2 card (3DLabs server). - * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*. - * Makefile: added support for modules and modules64 for sparc*. - * c/stuff.xs.pm: added kernel_arch function for getting the current true - architecture provided by the kernel (uname -m). - -2000-05-09 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (kdeicons_postinstall): the URL link to doc must - be $lang/index.html, not only $lang. - - * standalone/mousedrake: add handling of XF86Config-4 - - * any.pm (setupBootloader): fix bug (was adding 2 glob_'s) - -2000-05-08 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): move the touch of some files here to please linuxconf - - * install2.pm (miscellaneous): s/KBD/KEYBOARD/ - - * lilo.pm (install_grub): don't keep symlinks for reiserfs - * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs) - - * install_any.pm (getHds): default mount point for windobe in - lowercased for StartOffice(!) - -2000-05-08 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added - Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards - * keyboard.pm: Added new Lithuanian keyboard and changed the - string for brazilian ABNT-2 to state more clearly its ABNT nature - (it is not a standard PC keyboard; it uses some different keycodes) - -2000-05-07 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (choosePackages): return availableCorrected - instead of available - - * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's) - - * modules.pm (text2driver): same as text2lang below - * keyboard.pm (text2keyboard): same as text2lang below - * lang.pm (text2lang): replace the while (... each) by a foreach - (keys) (because each is dangerous if loop is exited) - - * install_steps_interactive.pm (selectKeyboard): better handling - of multiple langs question. - - * ftp.pm (new): Timeout set to 60 (seconds), was default (120) - - * install_steps_interactive.pm (setup_thiskind): remove ide-* - from modules displayed as loaded. - -2000-05-06 Pixel <pixel@mandrakesoft.com> - - * fsedit.pm (check_mntpoint): verify that standard mntpoints (/ - /usr) are not on not trueFS - - * any.pm (setupBootloader): add $prefix for the 2 glob_'s - -2000-05-07 Pablo Saratxaga <pablo@mandrakesoft.com> - - * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua - -2000-05-06 Pablo Saratxaga <pablo@mandrakesoft.com> - - * printerdrake.pm: fixed English error - -2000-05-05 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm (monitorConfiguration): remove the special case - for fbdev. - - * install_steps_interactive.pm (setup_thiskind): replace return by - next in case load_module fails. - - * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade - - * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's - * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4 - - * pkgs.pm (correctSize): updated for 7.1 - - * install_any.pm (getAvailableSpace): move the removing of - $minAvailableSize here. - -2000-05-04 Pixel <pixel@mandrakesoft.com> - - * install2.pm (configurePrinter): give clicked to printerConfig - - * interactive.pm (ask_from_entries_ref): set default val if not_edit - - * interactive_newt.pm (ask_from_entries_refW): remove setting of - default val. Now done in interactive::ask_from_entries_ref - - * interactive_gtk.pm (ask_from_entries_refW): handle empty value - - * modules.pm (read_already_loaded): ensure that already loaded - modules are put in %loaded. - * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel) - - * lilo.pm (install_lilo): truncate label's to 15 chars - - * install_any.pm (generate_ks_cfg): fix missing space - * install_any.pm (generate_ks_cfg): fix bug for nfs comand - - * install2.pm: get rid of autoformat - * install_steps.pm (choosePartitionsToFormat): get rid of autoformat - -2000-05-03 Pixel <pixel@mandrakesoft.com> - - * any.pm (setupBootloader): replace ask_many_from_list by - ask_from_list for bootloader choice - - * services.pm (drakxservices): stop immediately service if removed - - * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd - * install_steps.pm (afterInstallPackages): touch some files to - please linuxconf - -2000-05-03 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: updated min size, fixed kppprc generation. - * install_any.pm: make sure postinstall-rpm is here before - erasing (avoid error on reboot only). - -2000-05-02 Pixel <pixel@mandrakesoft.com> - - * raid.pm (format_part): don't call raid::make if part is already - formatted (as raidstop fails) - - * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any - more - - * install_steps_interactive.pm (setup_thiskind): make insmod'ing - fail a simple warning. - - * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB - * share/MonitorsDB: take new one from RedHat - - * standalone/drakboot: added kfloppy - - * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly - not to have it) - -2000-05-01 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setRootPassword): remove - NIS_server, use NIS instead - * install_any.pm (setAuthentication): remove NIS_server, use NIS instead - - * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist - -2000-04-28 Pixel <pixel@mandrakesoft.com> - - * install_steps.pm (afterInstallPackages): fix yet another bug for - ttf from windobe handling - - * install_steps_interactive.pm (selectInstallClass): hide beginner - mode in corporate. Display special help. - -2000-04-29 Pablo Saratxaga <pablo@mandrakesoft.com> - - * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales - text to be properly aligned (reported by Craig Chang - <craig_chang@taipei.siscomm.com.tw>) - * common.pm: now that po handling is correct, I changed the order - of reading variables so that it follows the standards ($LANGUAGE first) - * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251 - -2000-04-28 François Pons <fpons@mandrakesoft.com> - - * install_steps*.pm: added support for selection of package during - upgrade the same way it is done for installation. added check of - minimal size, abort else (at least let the user know about :-) - fixed crypto if no network interface available. - * install2.pm: fixed problem during upgrade that lost network - configuration. - -2000-04-28 Pixel <pixel@mandrakesoft.com> - - * modules.pm (load_raw): don't call commands::insmod, do it in - place. Merge with load_multi - - * install_steps.pm (afterInstallPackages): fix windobe ttfonts - symlinking - - * Xconfigurator.pm (cardConfiguration): load module agpgart for - i810 - - * install_any.pm (getHds): changed the mount point setting for - windows partitions as device_windobe is not unique - -2000-04-27 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (create_steps_window): changed to adapt to - new hidden format - - * install2.pm (@installSteps): changed the way hidden is handled. - Now it is a true perl expression (great power now) - - * install_steps_gtk.pm (selectInstallClass1): update steps window - before asking normal/devel/server. Nicer! - - * install_steps_interactive.pm (configureNetwork): when "Cancel" - pressed at network interface configuration do not skip all - configuration. - -2000-04-26 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm (pppConfig): modified a lot, removed template - file for ifcfg and chat file. - -2000-04-26 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (choosePackagesTree): use a fix width for - the tree column (so that the checkbox are always visible without - scrolling) - - * standalone/drakboot: drakfloppy and gfloppy are X only, no need - to propose them in console - - * install_any.pm (relGetFile): added auto_inst to files to get - from Mandrake/base - - * install2.pm (main): changed auto_inst behaviour - - * standalone/adduserdrake: fix a bug (s/$o/$in/g) - - * interactive_newt.pm (ask_from_entries_refW): now handling - complete/changed/focus_out callbacks (at least more than before) - - * Newt/Newt.xs: added rough callback handling - -2000-04-25 François Pons <fpons@mandrakesoft.com> - - * printerdrake.pm: added support for PPA more easily, allow - printers entry using ppa driver event if pnm2ppa not installed, - install it if neccessary after. - * network.pm, install_steps.pm, install_steps_interactive.pm: - added support for stoping a network interface, usefull for ppp0 to - avoid using it too long. - * install_steps.pm: fixed missing local on pap_secrets file. - -2000-04-25 Pixel <pixel@mandrakesoft.com> - - * lilo.pm (install): moved the generation of the keytable here. It - is used by both lilo & grub (lilo is not always installed as was - assumed) - - * common.pm (formatAlaTeX): remove bounding spaces - - * pkgs.pm (setSelectedFromCompssList): remove the hack for min - mark 25 in beginner - * install_steps_interactive.pm (choosePackages): set $min_mark to - 25 in beginner - -2000-04-24 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (setupXfree): add a yesorno - question for choosing between XF4 and XF3 in expert - - * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window - - * install_any.pm (update_userkderc): make sure uid and gid are kept - - * diskdrake.pm (Create): add Extended_0x85 as a choice for expert - - * partition_table.pm (add_extended): handle a 3rd arg, - $extended_type to tell which kind of extended partition is wanted - * partition_table.pm (adjust_main_extended): in non-expert, - automatically set extended to linux-extended if there's only - linux-type partitions. - -2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com> - - * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit - and not for byte. RAM is expressed in megabytes -> MB - -2000-04-19 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: fixed crazy mutli CD manipulation. - * printer.pm: fixed wrong prototype of print_pages. - * install2.pm: set version to 7.1 for crypto stuff. - * crypto.pm: commented ackbar crypto site. - -2000-04-17 Pixel <pixel@mandrakesoft.com> - - * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by - linuxconf) - -2000-04-14 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePartitionsToFormat): don't - ask about checking bad blocks for reiserfs, cuz not handled - - * fs.pm (mount): reiserfs handling - * fs.pm (format_reiserfs): added - * fs.pm (write_fstab): add option "notail" for reiserfs if - the partition holds the kernel (/boot or /) - - * partition_table.pm (isTrueFS): added, replaces most occurences - of isExt2 - -2000-04-12 François Pons <fpons@mandrakesoft.com> - - * install2.pm: force installation step if package have been - selected on step choose packages. - * install_any.pm: protected against die in perl (setstep or - theme_changed). - -2000-04-11 François Pons <fpons@mandrakesoft.com> - - * resize_fat: added some limits verification. - * interactive_gtk.pm: corrected swap of arg with help adding. - -2000-04-10 François Pons <fpons@mandrakesoft.com> - - * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list, - which is used by printerdrake only. drops key bindings. - -2000-04-07 François Pons <fpons@mandrakesoft.com> - - * tools/serial_probe: obsoleting pnp_serial which is now replaced - by this one, taken from kudzu, really faster and probe all serial - devices at one time. modified to probe correctly modem :-) - * mouse.pm: updated to use serial_probe interface of - detect_devices.pm. - * detect_devices.pm: modified to use serial_probe, cache probed - devices to avoid reprobing. - -2000-04-06 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm, install_steps.pm: added support - for peerdns options of ppp, so removed dns address unless expert. - -2000-04-05 François Pons <fpons@mandrakesoft.com> - - * crypto.pm, install_steps_interactive.pm, install2.pm, - install_steps.pm: added crypto stuff to support hdlist-crypto.cz2 - and depslist-crypto. dependancies are not supported but with a - simpler format of depslist file where closure are not done and - only package name are used for dependancies. - * pkgs.pm: added better support for multi CD manipulation, - including selection and refus. - -2000-04-04 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm: modified selection packages from compssList by - incremental selection, much more quickly. - added selected medium for selecting a package. - * install_any.pm: refused media hash transfered to selected value - of media table. - @needToCopy list should only have package of default medium. - -2000-04-03 Pixel <pixel@mandrakesoft.com> - - * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha - -2000-03-31 François Pons <fpons@mandrakesoft.com> - - * install_steps_gtk.pm: made changeMedium sub modification - permanent. - * pkgs.pm: modified upgrade to avoid use of header. - -2000-03-31 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: some more choices for PPC keyboards - -2000-03-30 François Pons <fpons@mandrakesoft.com> - - * install2pm: added eval around loading af_packet and postinstall - copy of RPMS. - * devices.pm: added /dev/kdb for SPARC. - * install_any.pm: modified multi CD management, postinstall copy - of RPMS. - * install_steps_gtk.pm: added support for Xsun server for SPARC. - * install_steps_interactive.pm: added multi CD dialog box for - selecting CD available. Serialized ethernet configuration and ppp - configuration. - * pkgs.pm: added check for infinite recursion for bad depslist. - * printer.pm: better test for reparse of printerdb. - * Xconfigurator.pm: added support for Xsun server for SPARC. - -2000-03-30 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (choosePackagesTree): enhance tree selection - -2000-03-29 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (wait_messageW): add some padding (nicer) - - * install_steps_interactive.pm (generateAutoInstFloppy): created, - creates a floppy for auto installs. - - * install_any.pm (generate_ks_cfg): created, generates stage1 - ks.cfg file - - * share/po/DrakX.pot: added special comment for grub entry - -2000-03-28 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (selectKeyboard): sort langs for - many-lang install - - * mouse.pm (write): add WHEEL telling if a wheel mouse is there - -2000-03-28 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: added entries for all three Armenian keyboards - -2000-03-26 Pixel <pixel@mandrakesoft.com> - - * install_any.pm (install_urpmi): full support for multi-hdlist's - - * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of - $prefix/var/lib/urpmi - * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a - fake name. Access via /tmp/$hdlist is given for non-fake name - - * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/) - -2000-03-25 Pixel <pixel@mandrakesoft.com> - - * lilo.pm: updated to the new format of entries. It was an hash. - Now the key is field kernel_or_dev, and entries is an array. - - (get): added, it returns the entry using a kernel - (needed because entries is no more a hash) - - * install_steps_interactive.pm (setupLILO): adapted to the new format - - * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling - - * fsedit.pm (suggest_part): if suggested part contains a field - "hd", ensure the partition is created on this hard drive - - * install2.pm (main): before leaving installation, remove - /var/lib/urpmi if urpmi not installed - - * diskdrake.pm (Resize): ext2resize to size $part->{size} instead - of $size - -2000-03-24 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (hasHPT): added. Now nice handling of hpt366 - (ultra66) without rebooting and making special floppy :) - - * lilo.pm (install_grub): much better grub configuration (better - than lilo's :pp) - - * install_steps.pm (setupBootloaderBefore): remove entry floppy - for security > 3 - -2000-03-23 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (selectMouse): added, takes care of telling - the X server if the user changed the mouse type. Only done if - a serial mouse is chosen. - - * install_steps_newt.pm (doPartitionDisks): add a call to - - * mouse.pm (write): added "device=" in etc/sysconfig/mouse for - devfs (it looses the symlink /dev/mouse) - -2000-03-22 Pixel <pixel@mandrakesoft.com> - - * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry - -2000-03-20 François Pons <fpons@mandrakesoft.com> - - * detect_devices.pm, fs.pm, install_any.pm: added supports for - LS-120 floppy drive and icons on desktop of KDE (untested). - * printer.pm, printerdrake.pm: added supports for PPA interface in - new rhs-printfilters, always enable "Print text as postscript" - option for such printers. - -2000-03-20 Pablo Saratxaga <pablo@mandrakesoft.com> - - * keyboard.pm: changed XKB name for Swedish keyboard - changed XKB names for Russian and German keyboards - added a choice for "Croatian" keyboard - * share/compss{,List}: added various new locales-*, ispell-* - and netscape-* files. changed ppa to pnm2ppa. - -2000-03-17 François Pons <fpons@mandrakesoft.com> - - * install_steps.pm: added setup for all configured queue. - * install_steps_interactive.pm: modified for retrieving packages - or current configuration. - * printer.pm: correction, tested retrieve of printer - configuration without printtool comments in printcap file: added - update of entry according to gsdriver used (untested again). - * printerdrake.pm: better handling of cancel, manage of multiple - queue definition together (as lp|My printer). - -2000-03-16 François Pons <fpons@mandrakesoft.com> - - * install_steps_interactive.pm: moved in printerdrake.pm the test - of printer usage. - * printerdrake.pm: heavy modification to handle multiple queue, - corrected some bugs too, added much more features as printtool. - * printer.pm: added more features for filter, allow printer to be - retrieved without help of printtool id in printcap file (untested). - -2000-03-14 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Loopback): handling of the file loopback: test - existence of the file and take its size. - -2000-03-14 François Pons <fpons@mandrakesoft.com> - - * install_any.pm: corrected for duplicate file on other CD. - -2000-03-13 Pixel <pixel@mandrakesoft.com> - - * detect_devices.pm (floppies): don't return hash but the device name - -2000-03-13 François Pons <fpons@mandrakesoft.com> - - * pkgs.pm, install_any.pm: small correction for multiple media - installation. - * tools/syncrpms: added for handling synchronisation of multiple source - rpm directories (and multiple target), include cleaning. - * tools/closurepkgs: tools to get rpm that may be installed by DrakX - after normal packages installation (printer, network, X11...), may - be used to duplicate on other CD some important stuff of the first - one. - -2000-03-12 Pixel <pixel@mandrakesoft.com> - - * install_steps_interactive.pm (choosePackages): compute the - max_size very simply (sum of all package sizes), otherwise too costly - - * pkgs.pm (install): call cleanHeaders at the end - * pkgs.pm (cleanHeaders): created - - * install2.pm (miscellaneous): /etc/msec/init.sh is now - /usr/sbin/msec (yoann thanks for not telling :pp) - - * pkgs.pm (install): remove the $prefix of mountpoints for not - enough room to install error message - -2000-03-11 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm (_create_window): add callback on focus to - ensure_focus. The result is no more 3 focus states with 2 buttons. - - * interactive_gtk.pm (ask_from_treelistW): better keyboard handling - - * raid.pm (make): check the result of mkraid. Suggest raidtools - are missing in standalone diskdrake - - * devices.pm (set_loop): created, searches for an available - loopback and sets the file to it - - * lilo.pm (dev2grub): fixed a missing slash - - * interactive_gtk.pm (wait_message_nextW): do not update if same - message, otherwise silly gtk won't do anything and we'll wait - forever :( - -2000-03-10 François Pons <fpons@mandrakesoft.com> - - * *.pm: heavy modification to take into account multiple media - installation. - -2000-03-10 Pixel <pixel@mandrakesoft.com> - - * install2.pm (@install_classes): cleanup, no more i18n (is now in - install_steps_interactive), remove old entries - -2000-03-09 Pixel <pixel@mandrakesoft.com> - - * modules.pm (write_conf): don't add alias block-major-11 in every case - * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss) - - * fs.pm (format_*): move the @options before the device - - * loopback.pm: created, added a lot of stuff for loopback in - diskdrake.pm, fs.pm... - -2000-03-08 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm: %type2fs replaced ox402 by 0x402 - - * detect_devices.pm (cdroms): fix "scd" (should be "scd0") - - * install_any.pm (install_urpmi): update for new hdlist.cz2 - -2000-03-07 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/ - - * install_steps_interactive.pm (addUser): force add a normal user - for security 4 - -2000-03-05 Pixel <pixel@mandrakesoft.com> - - * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row - (tis the Gtk-Perl 0.7002 was of doing) - -2000-03-04 Pixel <pixel@mandrakesoft.com> - - * modules.pm (write_conf): add ide-floppy to the modprobes of - post-install supermount - -2000-03-03 Pixel <pixel@mandrakesoft.com> - - * commands.pm (ps): add RSS to ps command - -2000-03-02 Adam Lebsack <adam@mandrakesoft.com> - - * mouse.pm: added mac mouse detection to mouse::detect. - * detect_devices.pm: added a routine to probe /dev/usbmouse on macs. - -2000-03-01 François Pons <fpons@mandrakesoft.com> - - * *.pm: heavy modification to take into account smaller - transaction during installation. - still a lot of test to perform, no provides updated currently and - building of hdlist.cz2 and depslist.ordered need old files... - nothing done for hdlist.gz during post installation, but - hdlist.cz2 is already copied in /var/lib/urpmi [and is used during - installation of packages as extract_archive need a true file]. - -2000-03-01 Pixel <pixel@mandrakesoft.com> - - * lilo.pm (install_grub): creation - - * network.pm (write_interface_conf): ONBOOT = !pcmcia - - * install_steps_gtk.pm (new): more intelligent SIGCHLD handler - -2000-02-29 Pixel <pixel@mandrakesoft.com> - - * modules.pm: moved common network stuff from "net" to "network" - (modules like nfs lockd...) - - * fs.pm (write_fstab): moved the sort to the right place - - * services.pm (drakxservices): chkconfig --list is i18n'ed :( - set LANGUAGE=C before - - * partition_table_raw.pm (get_geometry): geom{cylinders} must not - be a decimal value :) - - * install_steps_gtk.pm (create_logo_window): set_name logo for - logo window - * share/install.rc: force disabling of background image theme - - * install_steps_gtk.pm (enteringStep): add step information for - console 1 - - * any.pm (addKdmIcon): new function - * install_steps.pm (addUser): handle field icon - * install_steps_interactive.pm (addUser): add choice of kdm icon - * standalone/adduserdrake: add choice of kdm icon - - * diskdrake.pm (ask_all_data...): change for easier i18n - - * install_steps.pm (miscellaneous): add CLEAN_TMP handling - (need cleaning?) - * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP - option in expert - * install2.pm (miscellaneous): add CLEAN_TMP option for - /etc/sysconfig/system - - * install_steps_interactive.pm (miscellaneous): forbidden - useSupermount if high security. - - * mouse.pm (detect): fix bug (ttyS instead of ttyS0) - -2000-02-28 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for - svga and accel. SVGA also wants 16 bpp. added ugly modeline for - 800x600. - - * partition_table_raw.pm (get_geometry): when the - HDIO_GET_IDENTITY fails, defaults to what GETGEO gave - - * install2.pm (main): use modules::load_multi to increase boot - start time - - * modules.pm (load_multi): added this function for loading many - modules at once. - - * install_steps_gtk.pm (new): increase time before timeout - - * detect_devices.pm (cdroms): change the device associated with - ide-burners (hdX -> scdX). Problem is how to know the X in scdX :( - - * modules.pm (write_conf): sort scsi_hostadapter's - -2000-02-27 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): load ide-probe and the like in 'prereq' type - so no aliases are added to conf.modules - -2000-02-25 Pixel <pixel@mandrakesoft.com> - - * devices.pm (make): small code cleanup - - * partition_table_raw.pm (adjustEnd): more explicit error message - - * fsedit.pm (allocatePartitions): fix a bug (size was getting too - big after each allocation) making adjustEnd cry - -2000-02-24 Pixel <pixel@mandrakesoft.com> - - * interactive_gtk.pm (new): added the "new" method to initialize - windowheight for isStandalone - - * install_steps_gtk.pm (new): returns undef in case no X server - works - - * install2.pm (main): moved the ejectCdrom from install_steps::END - to here - * install2.pm (main): fix the $SIG{SEGV} handler - * install2.pm (main): added a "try again" in text install if the - "new" fails - - * install_steps_interactive.pm (createBootdisk): fix an error for - non fdX choice of floppy drive - - * install_steps_interactive.pm (setup_thiskind): remove the - "defined @l" - -2000-02-23 Pixel <pixel@mandrakesoft.com> - - * install2.pm (%suggestedPartitions): remove any /boot entries - * install2.pm (selectInstallClass): removed the special code to - /boot entries from suggestedPartitions for on non-intel (and it - was buggy :) - * fsedit.pm (@suggestions): remove the /boot entry - * fsedit.pm (check_mntpoint): remove the 1024 cylinder check - * fsedit.pm (suggest_part): remove the 1024 cylinder special case - - * install_steps_interactive.pm (setupLILO): replace linear option - by lba32 - - * lilo.pm (suggest): add lba32 by default - - * install_steps_interactive.pm (load_thiskind): moved the HPT - stuff to install_any::ultra66 and call it. - Add sound card configuration (3 lines :) - - * my_gtk.pm and interactive_gtk: resize the list and tree based on - root window size - - * install_steps_gtk: $width and $height goes $::rootwidth and - $::rootheight, also other dimensions goes global (main::) - - * commands.pm (strings): replace the typo \{$n,} by {$n,} - -2000-02-23 François Pons <fpons@mandrakesoft.com> - - * build_archive, extract_archive: changed format of TOC to speed - up extraction of archive, now 5 to 6 times faster to read TOC :-) - -2000-02-22 Pixel <pixel@mandrakesoft.com> - - * Xconfigurator.pm: load "Cards" database only to translate NAME - to fields. Added file CardsNames created from Cards using - share/Cards2CardsNames. Kind of list of normalized NAMEs - - * MonitorsDB: replace the ` ' separator for vendor by `|' - - * install_steps_interactive.pm (timeConfig): use ask_from_treelist - - * interactive_gtk.pm (ask_from_treelist): creation of - ask_from_treelist. Usage is just the same as ask_from_list with - one more argument (the separator eg: |, /) - -2000-02-21 François Pons <fpons@mandrakesoft.com> - - * diskdrake.pm: fixed deadlock while trying to create partition - when available space is equal or less than 2 cylinders. fixed - Create action on corrupted partition by removing stalling window. - Blocked partition table writing if there are error by forcing user - to correct partition table. - * partition_table.pm: fixed typo in verifyParts with cdie, added - verifyParts on Resize action. - -2000-02-21 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (create_big_help): display the help in full - screen - - * my_gtk.pm (_create_window): add big help on F1 - - * common.pm (add2hash): now returns the first parameter - - * mouse.pm (detect): really defaults to serial mouse - - * interactive.pm: add ask_many_from_list_with_help and - ask_many_from_list_with_help_ref - - * services.pm: creation, it handles what was in - standalone/drakxservices - -2000-02-18 Pixel <pixel@mandrakesoft.com> - - * install_steps_gtk.pm (createXconf): added /dev/ (X wants - "/dev/psaux" and not "psaux") - - * diskdrake.pm (Create): show start sector even for non-expert on - non-i386 - -2000-02-16 Pixel <pixel@mandrakesoft.com> - - * mouse.pm (detect): add defaults to serial mouse - - * install_steps_gtk.pm (createXconf): remove the defaults to - serial mouse - -2000-02-15 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm: "After %s partition %s," inlined otherwise does - not please pablo and translators... - -2000-02-14 Pixel <pixel@mandrakesoft.com> - - * diskdrake.pm (Create): hide start sector choice for non-expert - -2000-02-11 Pixel <pixel@mandrakesoft.com> - - * partition_table_raw.pm (get_geometry): do not use the cylinder - number given by HDIO_GETGEO cuz limited to 16bits. Compute using - the total_sectors using HDIO_GET_IDENTITY - - * c/stuff.xs.pm: added total_sectors (gives the number of sector - of a drive) - - * modules.pm (load): ignore error in loading prereq's - - * modules.pm (@drivers_by_category): rcpci instead of rcpci45, - z85230 added - - * commands.pm (mount): add modules::load_deps otherwise the - fs::mount won't succeed insmoding vfat if needed - -2000-02-11 François Pons <fpons@mandrakesoft.com> - - * fixed diskdrake to handle limit case when creating and resizing - partition table, address size limit and start sector limit. - -2000-02-11 Pixel <pixel@mandrakesoft.com> - - * install2.pm (main): add a callback on SEGV - -> message printed - -> that way, ENDs are called (otherwise skipped) - - * install_steps_interactive.pm (setup_thiskind): handles the undef - value returned by load_thiskind - - * install_steps_interactive.pm (exitInstall): do not call - install_steps::exitInstall - - * install_steps (exitInstall): removed - * install_steps (END): added (it does ejectCdrom) - - * install_steps_interactive.pm (load_thiskind): returns undef if - error loading a module - - * fs.pm (format_part): changed the prototype from $;$@ to $;@ - otherwise, @options always have a value (mostly undef) and mkdosfs - fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32) - - * install_steps_interactive.pm (setup_thiskind): - add a $auto_probe_pci that overrules $o->{auto_probe_pci} - (that way no pci probe the second time) - -2000-02-10 François Pons <fpons@mandrakesoft.com> - - * heavy modification of build_archive and extract_archive to manage - a TOC directly in archive file, handle bzip2 or gzip compression, - extract_archive can extract multiple files a time, with minimal - invocation of uncompress program and follow symlink and expand - directory contents. - * use build_archive/extract_archive for locales. - * fixed a min/max in install_steps_gtk for Resize/Create partition. - * fixed adjustEnd with dos partition table, take care of magic 63 - sectors at beginning of partitions, a more solid method should be - used for that. - -2000-02-10 Pixel <pixel@mandrakesoft.com> - - * modules.pm (load_thiskind): skip modules "unknown" and "ignore" - -2000-02-09 Pixel <pixel@mandrakesoft.com> - - * partition_table.pm (add): cdie if maximum number of partitions - handled by linux is reached - - * Xconfigurator.pm (chooseResolutionsGtk): display the graphic - card or server found - - * install_any.pm (relGetFile): for mdkinst files, take care not to - have a double '/' (see debbugs #591) - - * install_steps_interactive.pm (configureNetwork): - purpose: add ability to configure both modem and lan - clean up the behaviour - - * fs.pm (write_fstab): - purpose: sort the fstab per mount point (cuz /usr must be before /usr/local) - also: rewrite of the part writing the fstab. |