summaryrefslogtreecommitdiffstats
path: root/perl-install/ChangeLog
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/ChangeLog')
-rw-r--r--perl-install/ChangeLog25165
1 files changed, 0 insertions, 25165 deletions
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index e74787675..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,25165 +0,0 @@
-2002/07/07 daouda
-
- * Makefile:
- - remove share/wizard.rc in DISTFILE
-
- * drakxtools.spec:
- - directory should exist before mv'ing things (mkdir
- %%buildroot%%_initrddir)
- - mv typo in %install section (titi sux)
-
-2002/07/07 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: smarter raidAutoStartRaidtab
- great new raidAutoStartRaidtab allowing to handle existing software
- raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
- remove detect_devices::check (including the annoying log about no
- modules for the pci entry)
-
- * modules.pm: new "append_to_etc_modules" function
- remove detect_devices::check (including the annoying log about no
- modules for the pci entry)
-
- * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
- software raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
-
- * any.pm: small regexp cleanup
-
- * fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
- favour of isThisFs('nfs', ...)
-
- * interactive_newt.pm: make the buttons work in all cases
- - workaround segfaults
- - ensure the perl values are set when calling the clicked_may_quit
- callback
-
- * devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
- * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
- marked dirty on any actions that destroy the raid
-
-2002/07/06 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (ask_users): the user name length must be <= 32
-
- * diskdrake/interactive.pm (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * Makefile.config: standalone/drakbug doesn't exist! (why did deush add
- it???)
- it is standalone/harddrake2, not standalone/harddrake (poor deush must
- be loosing his brain :p)
-
- * diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
- (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
- can't be used as mountpoints), dixit redhat
- (package_needed_for_partition_type): return the package needed for a
- partition type
- (check_type): cleanup
-
- * install_any.pm (setDefaultPackages): use
- fsedit::package_needed_for_partition_type to get things like jfsprogs
-
- * fs.pm: supermount now handles fs=auto, using it :)
-
- * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
-
-2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * Makefile.config: add the harddrake service which was missing
-
- * printer.pm: try to simplify
-
- * harddrake/ui.pm: simplify: use reverse
- - help system:
- - add an help entry in help menu;
- - begin to describe information fields
-
- - reformat license in about window
-
- - information frame (mostly fixing incoherency between various hw
- classes fields)
-
- - s/media type/media class/
-
- - s/info/Hardware id/
-
- - s/device/device file/
-
- - split description into manufacturer/description
-
- - eide devices:
-
- - rename bus as bus_location
-
- - set interface_type as bus
-
- - scsi devices:
-
- - set bus to SCSI
-
- - set bus_location to bus:id fields
-
- - don't print pci subids when non set
-
- - remove fields that were already used above (vendor id subvendor
- subid pci_bus pci_device pci_function)
-
- - no need to return window after program exit
-
- - print usage if needed
-
- - embed hardware tree in a "detected hardware" frame
-
- - cleanups:
-
- - rename widget2 as frame
-
- - remove dead commented code
-
- * drakxtools.spec: add harddrake2 service
-
- * standalone/icons/harddrake2/webcam.png,
- standalone/icons/harddrake2/harddrake.png,
- standalone/icons/harddrake2/keyboard.png,
- standalone/icons/harddrake2/ide_hd.png,
- standalone/icons/harddrake2/cable.png,
- standalone/icons/harddrake2/video.png,
- standalone/icons/harddrake2/tape.png,
- standalone/icons/harddrake2/joystick.png,
- standalone/icons/harddrake2/harddisk.png,
- standalone/icons/harddrake2/usb.png,
- standalone/icons/harddrake2/memory.png,
- standalone/icons/harddrake2/hw_network.png,
- standalone/icons/harddrake2/scsi_hd.png,
- standalone/icons/harddrake2/unknown.png,
- standalone/icons/harddrake2/floppy.png,
- standalone/icons/harddrake2/hw_printer.png,
- standalone/icons/harddrake2/scanner.png,
- standalone/icons/harddrake2/cd.png,
- standalone/icons/harddrake2/isdn.png,
- standalone/icons/harddrake2/tv.png,
- standalone/icons/harddrake2/sound.png,
- standalone/icons/harddrake2/scsi.png,
- standalone/icons/harddrake2/cpu.png,
- standalone/icons/harddrake2/hw_mouse.png,
- standalone/icons/harddrake2/modem.png,
- standalone/icons/harddrake2/K7.png: add harddrake2 icons
-
-2002/07/06 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (ask_users): the user name length must be <= 32
-
- * commands.pm: adapt to new modprobe.pm
-
- * diskdrake/hd_gtk.pm:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
- (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * diskdrake/interactive.pm (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
- (Resize): resize2fs handles ext3 :)
-
- * install_any.pm (setDefaultPackages): use
- fsedit::package_needed_for_partition_type to get things like jfsprogs
- when merge_fstabs, handle in a different way mtab and fstab (or
- manualFstab)
- => this allows to force the type&options in manualFstab
-
- * fsedit.pm (package_needed_for_partition_type): return the package needed
- for a partition type
- (check_type): cleanup
-
- * docs/comparisons: various remarks about mandrake
-
- * partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
- disks to install
- (but no way to create such beasts)
-
- * Makefile.config: standalone/drakbug doesn't exist! (why did deush add
- it???)
- it is standalone/harddrake2, not standalone/harddrake (poor deush must
- be loosing his brain :p)
- add harddrake pm's
-
- * partition_table.pm: Allows people having PVs on unpartitioned disks to
- install
- (but no way to create such beasts)
- cleanup
-
- * fs.pm: supermount now handles fs=auto, using it :)
- when merge_fstabs, handle in a different way mtab and fstab (or
- manualFstab)
- => this allows to force the type&options in manualFstab
-
- * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
-
-2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/lsnetdrake: simplify
-
- * Makefile: add harddrake to DISTFILES
-
- * printer.pm: try to simplify
-
- * harddrake/TODO: add bits regarding eide and scsi
-
- * standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes
-
- * harddrake/ui.pm: simplify: use reverse
- - help system:
- - add an help entry in help menu;
- - begin to describe information fields
-
- - reformat license in about window
-
- - information frame (mostly fixing incoherency between various hw
- classes fields)
-
- - s/media type/media class/
-
- - s/info/Hardware id/
-
- - s/device/device file/
-
- - split description into manufacturer/description
-
- - eide devices:
-
- - rename bus as bus_location
-
- - set interface_type as bus
-
- - scsi devices:
-
- - set bus to SCSI
-
- - set bus_location to bus:id fields
-
- - don't print pci subids when non set
-
- - remove fields that were already used above (vendor id subvendor
- subid pci_bus pci_device pci_function)
-
- - no need to return window after program exit
-
- - print usage if needed
-
- - embed hardware tree in a "detected hardware" frame
-
- - cleanups:
-
- - rename widget2 as frame
-
- - remove dead commented code
-
- * harddrake/data.pm: add a configurator for sound
-
- * standalone/icons/harddrake2/cable.png,
- standalone/icons/harddrake2/tape.png,
- standalone/icons/harddrake2/usb.png,
- standalone/icons/harddrake2/hw_network.png,
- standalone/icons/harddrake2/unknown.png,
- standalone/icons/harddrake2/hw_printer.png,
- standalone/icons/harddrake2/scanner.png,
- standalone/icons/harddrake2/isdn.png,
- standalone/icons/harddrake2/cd.png,
- standalone/icons/harddrake2/scsi.png,
- standalone/icons/harddrake2/hw_mouse.png,
- standalone/icons/harddrake2/K7.png,
- standalone/icons/harddrake2/webcam.png,
- standalone/icons/harddrake2/harddrake.png,
- standalone/icons/harddrake2/keyboard.png,
- standalone/icons/harddrake2/ide_hd.png,
- standalone/icons/harddrake2/harddisk.png,
- standalone/icons/harddrake2/joystick.png,
- standalone/icons/harddrake2/video.png,
- standalone/icons/harddrake2/memory.png,
- standalone/icons/harddrake2/scsi_hd.png,
- standalone/icons/harddrake2/floppy.png,
- standalone/icons/harddrake2/sound.png,
- standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
- standalone/icons/harddrake2/modem.png: add harddrake2 icons
-
-2002/07/05 daouda
-
- * Makefile.config:
- - add harddrake drakbug drakTermServ to STANDALONEPMS_
-
- * drakxtools.spec:
- - snapshot
- - new entries:
- o harddrake2 : new hardware detection && configuration tool
- o drakbugreport: bug reporting tool a la Kde (not working!)
- o drakTermServ : configuration tool for diskless stations.
-
-2002/07/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (prepare_write_fstab): for supermount, have "none" as the device
- (cleaner, and
- more coherent with the "supermount" script (tx to FredC))
-
-2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * install_steps_interactive.pm: minimize startup: only load
- harddrake::bttv if the user click on "tv
- card" field in the hw summary window
- use harddrake::bttv to let people configure their tv card if it's
- misdetected
-
- * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
- a module)
- POSIX is no more used too.
-
- * harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
- users,
- install_steps_interactive.pm and drakxtv which both have already
- tested that a bttv managed tv card is there.
- - add more tv cards
- - enable users to select number of buffers for mmap()
- - better description for pll setting
-
- - add tooltips help for some entries
- tv cards list:
-
- - split multi-cards entries
-
- - reverse the hash (needed since now bttv card types are not
- anymore unique)
-
- - complete the list from various sources
-
- - use a tree to display the list, it's clearer now since it's
- splitted by vendors
-
- - longer message
- - remove uneeded stuff for modules ("#!/..", "use lib..", "use
- standalone", ...)
-
- - simplify bttv options managment:
-
- - use if_, thanks MDK::Common
-
- - s/mapn/map by using a hash at first
-
- - s/mapn{if}/map{if_}
-
- - don't read/write modules.conf here, drakx take care of that for us
-
- thus, the test program became:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use bttv;
- use interactive;
- use modules;
-
- modules::read_conf;
- bttv::config('interactive'->vnew());
- modules::write_conf;
- spec29: bttv configuration part of drakxtv.
- it can be used by:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use harddrake::bttv;
- use interactive;
-
- bttv::config('interactive'->vnew());
-
- * drakxtools.spec: fix typo
- fix dirs1/dirs2 mismatch
- - M-q descriptions
- - simplify file lists building
- - we can use several -f on one "%%files" line
-
- * standalone/drakxtv: if we're root and there's a tv card managed by bttv,
- offer to
- configure bttv trough harddrake::bttv
-
- * tools/cvslog2changelog.pl: typo fix
-
- * harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/05 François Pons <fpons@mandrakesoft.com>
-
- * Makefile:
- - handle /lib/i686 case
- - replace Mandrake/RPMS with Mandrake/RPMS*
-
-2002/07/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
- mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
- mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
- pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
- sources)
-
-2002/07/05 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
- strict"
- do not look at the mar files anymore, only use kernel/modules.pl (and so
- list_modules.pm)
-
- * diskdrake/interactive.pm: handle comments in fstab
-
- * fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
- the entry is for the same mountpoint AND the same device
- handle comments in fstab
-
- * share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
- gnupg, only suggest it very strongly :)
-
- * mdk-stage1/usb-resource/update-usb-ids.pl:
- - do not use mar files for the list of modules, use list_modules.pm
- via kernel/modules.pl instead
- - use read_pcitable to parse usbtable
-
-2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
- a module)
- POSIX is no more used too.
-
- * drakxtools.spec: fix typo
- fix dirs1/dirs2 mismatch
- - M-q descriptions
- - simplify file lists building
- - we can use several -f on one "%%files" line
- - add preliminary harddrake support
-
- - clean %post
-
- - bump version number
-
- * harddrake/bttv.pm:
- - remove uneeded stuff for modules ("#!/..", "use lib..", "use
- standalone", ...)
- - simplify bttv options managment:
-
- - use if_, thanks MDK::Common
-
- - s/mapn/map by using a hash at first
-
- - s/mapn{if}/map{if_}
-
- - don't read/write modules.conf here, drakx take care of that for us
-
- thus, the test program became:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use bttv;
- use interactive;
- use modules;
-
- modules::read_conf;
- bttv::config('interactive'->vnew());
- modules::write_conf;
- spec29: bttv configuration part of drakxtv.
- it can be used by:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use harddrake::bttv;
- use interactive;
-
- bttv::config('interactive'->vnew());
-
- * Makefile: don't use sed when not needed
-
- * install_steps_interactive.pm: minimize startup: only load
- harddrake::bttv if the user click on "tv
- card" field in the hw summary window
- use harddrake::bttv to let people configure their tv card if it's
- misdetected
-
- * harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
- printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
- install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
- modules.pm
-
- * c/stuff.xs.pm: adapt to new ldetect
-
- * modules.pm: reworked, cleaned:
- - the list of modules is moved to kernel/list_modules.pm (and a few
- functions too)
- - new "add_probeall" function (similar to "add_alias")
- -> used for scsi_hostadapter and usb-interface
- - "load_multi" removed in favour of "load" which is now more powerful
- - load_thiskind renamed load_category
- - get_that_type renamed probe_category
- - %modules::drivers dropped (handled for list_modules)
- still more cleanup to come
-
- * rescue/make_rescue_img: adapt to the move all.modules ->
- kernel/all.modules and all.kernels -> kernel/all.kernels
-
- * modparm.pm: rework, cleanup, simplify and make it work
-
- * install2: create symlink list_modules.pm in current directory for
- testing purpose
-
- * Makefile: when building the tar for drakxtools, handle specially
- list_modules.pm
- adapt to the move all.modules -> kernel/all.modules and all.kernels ->
- kernel/all.kernels
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
- containing:
- - all.modules all.kernels update_kernel
- - part of perl-install/modules.pm now in kernel/list_modules.pm and
- kernel/modules.pl
- - update_kernel cleaned (it doesn't mention module names anymore, it
- is now in kernel/modules.pl)
- - cleanup Makefile
- - mdk-stage1 doesn't depend on perl-install anymore
- (more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
- * any.pm: reworked & cleaned the kernel modules part
- - adapt to new modules.pm
- - adapt to new modparm.pm
- - renamed setup_thiskind to load_category
- - renamed setup_thiskind_backend to load_category_no_message
-
- * share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04 daouda
-
- * standalone/draknet:
- - don't display clear password
-
-2002/07/04 fcrozat
-
- * share/rpmsrate: Fix GNOME2 packages
- Install urw-fonts when installing XFree
-
-2002/07/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/fr.po: updated French file
-
- * lang.pm: Changed some languages to defautl to utf-8
- removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
- languages)
-
-2002/07/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
- printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
- install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
- modules.pm
-
- * c/stuff.xs.pm: adapt to new ldetect
-
- * modules.pm: reworked, cleaned:
- - the list of modules is moved to kernel/list_modules.pm (and a few
- functions too)
- - new "add_probeall" function (similar to "add_alias")
- -> used for scsi_hostadapter and usb-interface
- - "load_multi" removed in favour of "load" which is now more powerful
- - load_thiskind renamed load_category
- - get_that_type renamed probe_category
- - %modules::drivers dropped (handled for list_modules)
- still more cleanup to come
-
- * getpkgs_deps, do_resize_fat: removed since unused
-
- * Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
- kernel/all.modules and all.kernels -> kernel/all.kernels
-
- * modparm.pm: rework, cleanup, simplify and make it work
-
- * install2: create symlink list_modules.pm in current directory for
- testing purpose
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
- containing:
- - all.modules all.kernels update_kernel
- - part of perl-install/modules.pm now in kernel/list_modules.pm and
- kernel/modules.pl
- - update_kernel cleaned (it doesn't mention module names anymore, it
- is now in kernel/modules.pl)
- - cleanup Makefile
- - mdk-stage1 doesn't depend on perl-install anymore
- (more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
- * tools/specific_arch: simplified using MDK::Common
-
- * any.pm: reworked & cleaned the kernel modules part
- - adapt to new modules.pm
- - adapt to new modparm.pm
- - renamed setup_thiskind to load_category
- - renamed setup_thiskind_backend to load_category_no_message
-
- * share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * harddrake/TODO: add harddrake2 todo list
-
- * harddrake/data.pm: get rid of 'use vars'
- remove wait_message hack for printerdraker, better use class_discard
- harddrake2: "the return of the vengeance son"
- - harddrake/data.pm: the data structure
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
- * harddrake/ui.pm: don't stack signals on config buttons
- - remove no more used @pid_launched
- - better GUI reactivity: don't wait for config tool to complete, just
- "fork and forget" [(c) us air force] and refuse to run another
- config tool until the first one to complete
- print "Running $configurator ..." in status bar while running a config
- tool
- - POSIX is needed for POSIX::wait
- - move strict and standalone require at top
-
- - c is unused
-
- - comment exceptions in devices loop (ie skip classes without any
- devices or any detector
-
- - optimize away $pid
- fix move from harddrake.pm to harddrake/data.pm:
-
- - menu does appear
-
- - information fields are translated from raw to english again
- harddrake2: "the return of the vengeance son"
-
- - harddrake/data.pm: the data structure
-
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
- * detect_devices.pm: add tapes() for harddrake2
-
- * standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
- return of the vengeance son"
- - harddrake/data.pm: the data structure
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-2002/07/03 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/probing.c: fixed static definition when non static
- declaration (gcc limitation).
- added conditional code around network detection.
-
-2002/07/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
- mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
- mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
- mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
- mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
- mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
- mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
- mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W
-
-2002/07/02 daouda
-
- * my_gtk.pm:
- - fill a combo by default :
- gtkcombo_setpopdown_strings($combo_widget,@strings)
-
-2002/07/02 gbeauchesne
-
- * c/smp.c:
- - TODO: Update ia64 check with /proc/pal/cpuX ?
- - TODO: Update x86_64 check when SMP machines are actually available
- - Conditionalize compilation of main() with TEST macro
-
-2002/07/02 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: try harder to find the full list of servers available,
- using "smbclient -L" to
- check the workgroup masters
-
-2002/07/01 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point
-
-2002/06/28 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm:
- - add authentification in diskdrake --smb (esp. for windows NT)
- - use "credentials=" to put the passwords
- (ideas and investigations from Stew Benedict,
- integrated by Pixel, but need testing)
- Known bug: if you want to change the password when there are 2 entries
- in fstab
- using the same username=/password=, writing the credentials is done in
- random order,
- => you've got one chance in 2 that the password is changed :-(
-
- * fs.pm:
- - add authentification in diskdrake --smb (esp. for windows NT)
- - use "credentials=" to put the passwords
- (ideas and investigations from Stew Benedict,
- integrated by Pixel, but need testing)
- Known bug: if you want to change the password when there are 2 entries
- in fstab
- using the same username=/password=, writing the credentials is done in
- random order,
- => you've got one chance in 2 that the password is changed :-(
- handle spaces in mount points and devices (using \040)
-
-2002/06/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
- drakTermServ application and icon.
-
-2002/06/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
- licence step is asked in any case (ie. even when selectLanguage is
- automatic)
-
- * any.pm: "my" variables where needed
-
-2002/06/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po, share/po/ar.po: Updated po files
-
-2002/06/19 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Makefile: corrected rules to make distributable rpms.
-
-2002/06/19 François Pons <fpons@mandrakesoft.com>
-
- * patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
- Mandrake Linux 8.2.
-
-2002/06/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: remove a few drivers so that hd.img and network.img are
- possible with latest BOOT kernel
-
-2002/06/19 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: use "wide links = no" for exporting via samba
- (thanks to Jan Schäfer)
-
- * fs.pm: mounting of ntfs after install really mount the partition (thanks
- to Buchan Milne)
-
-2002/06/18 daouda
-
- * my_gtk.pm:
- - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets
-
-2002/06/18 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Makefile.drakxtools: manage security subdir.
-
- * Makefile: added targets to build test and distribution rpms and srpms
- (localrpm,
- localsrpm, rpm, srpm).
- added security to the installed directories
-
- * pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
- apps.net_monitor: ripped from the srpm
-
-2002/06/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2002/06/17 cbelisle
-
- * standalone/draksec: added server, user and network advanced options
-
- * any.pm: draksec: customize entries for each options (lists, checkboxes
- and text boxes)
- Added user,server and network advanced options
-
- * security/msec.pm:
- - Customize entries for each options (checkboxes, text boxes and
- lists)
- added network, server and user advanced options
-
-2002/06/15 alus
-
- * share/po/pl.po: updates
-
-2002/06/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Catalan doesn't have French fallback anymore
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/06/11 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
- Philippe Coulon)
-
-2002/06/10 cbelisle
-
- * standalone/draksec: Add an entry for the security user email
-
- * security/msec.pm: Initial commit
-
- * any.pm: Add security user email entry in draksec
-
-2002/06/10 daouda
-
- * network/tools.pm:
- - choose country according to timezone.
-
-2002/06/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/syncrpms: english fix
-
-2002/06/10 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: s/class/class_/ for ldetect 0.4
-
-2002/06/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * timezone.pm: remove duplicate entry in ntp_servers
-
- * interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
- interactive_gtk
- to my_gtk between widgets creation and real
- stuff so that we can now call it with widgets
- places differently
-
-2002/06/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated po file
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: adapt to new lilo
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
- * bootloader.pm: adapt to new lilo
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
- install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
- fixes thx to vincent meyer
-
-2002/06/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
- instead of weird style
- with clearall unset & auto_allocate set
-
-2002/05/29 alus
-
- * share/po/pl.po: little fixes
-
-2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm: remove typo fix when it's not a fix :-)
- small typo
- remove typo (hopefully really a typo ;p)
-
- * any.pm: be a bit more polite
-
-2002/05/27 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: make sure patch is always read after defcfg to take
- precedance.
-
-2002/05/27 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15 alus
-
- * share/po/Changelog: info about polish translation
-
-2002/05/14 alus
-
- * share/po/pl.po: polish finished
- updated polish translation
- polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13 alus
-
- * share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libbzip2* and more explanations about failing compilation
-
- * mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
- adapt to gcc-3.1
-
-2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
- * share/po/eu.po: small corrections
-
-2002/04/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
- well
-
-2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed some machine with two present i830 CGC but only
- one in reality.
-
- * detect_devices.pm: updated usbMice to take care of device declared as
- Mouse:USB in usbtable (was
- not the case !)
-
-2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootlook.pm: a few english fixes
-
- * any.pm: fixes
- english fixes from v meyer
- a few english fixes thx to vincent meyer
-
-2002/04/19 alus
-
- * share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
- * share/po/hu.po: updated po file
-
-2002/04/18 alus
-
- * share/po/pl.po: 3 more long messages
- one entry
- stil working....
-
-2002/04/17 alus
-
- * share/po/pl.po: Mostly finished polish translation
- translations, fixes etc...
-
-2002/04/17 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: final candidate.
-
- * rescue/tree/etc/oem: final candidate.
- add gcc-cpp to oem install.
-
-2002/04/16 alus
-
- * share/po/pl.po: still working
- Few fixes
- Updated translation. Many strings is not yet translated...
-
-2002/04/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: sync with oem-prepare
- fixed stupid error.
- forget packdrake module invocation.
- fixed to support non standard rpm filename.
-
- * tools/oem-prepare: add gcc-cpp to always installed.
- disable unselection of some package (gmc, all gcc3.0 stuff).
-
-2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: only main version of automake
-
-2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated po file
-
-2002/04/16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
- dialog box
-
-2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: Another small fix
- Small corrections
-
-2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/mt.po: updated Maltese file
-
-2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: small typo correction
-
-2002/04/10 warly
-
- * share/rpmsrate: autofs -> 2
-
-2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
- and iptables
- packages conflict
-
-2002/04/09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm, partition_table_gpt.pm,
- partition_table_empty.pm, partition_table_bsd.pm,
- partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
- error message (thanks to Brian J. Murrell)
-
-2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed a bunch of things
-
- * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
- partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
- printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
- network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
- network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
- strings
-
-2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
- drakfloppy strings
-
-2002/04/07 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakfloppy: moving from his own rpm to drakxtools
-
- * Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 sdupont
-
- * standalone/drakbackup: please yduret, do not commit these changes on cvs
- before to test it.
- you can say "bugs fixes" only if you have corrected some errors but not
- if you create it!
- the backup on cd was disabled because the backend is not available for
- moment.
-
- * standalone/drakfont: remove uninteresting yduret changes,
- would it be possible to know what are your "bugs fixies" ?
- to yduret: I'm the creator of this program so please do not remove my
- changes.
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
- install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
- fixes thx to vincent meyer
-
-2002/06/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
- instead of weird style
- with clearall unset & auto_allocate set
-
-2002/05/29 alus
-
- * share/po/pl.po: little fixes
-
-2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm: remove typo fix when it's not a fix :-)
- small typo
- remove typo (hopefully really a typo ;p)
-
- * any.pm: be a bit more polite
-
-2002/05/27 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: make sure patch is always read after defcfg to take
- precedance.
-
-2002/05/27 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15 alus
-
- * share/po/Changelog: info about polish translation
-
-2002/05/14 alus
-
- * share/po/pl.po: polish finished
- updated polish translation
- polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13 alus
-
- * share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libbzip2* and more explanations about failing compilation
-
- * mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1
-
-2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
- * share/po/eu.po: small corrections
-
-2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed some machine with two present i830 CGC but only
- one in reality.
-
- * detect_devices.pm: updated usbMice to take care of device declared as
- Mouse:USB in usbtable (was
- not the case !)
-
-2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootlook.pm: a few english fixes
-
- * any.pm: fixes
- english fixes from v meyer
- a few english fixes thx to vincent meyer
-
-2002/04/19 alus
-
- * share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
- * share/po/hu.po: updated po file
-
-2002/04/18 alus
-
- * share/po/pl.po: 3 more long messages
- one entry
- stil working....
-
-2002/04/17 alus
-
- * share/po/pl.po: Mostly finished polish translation
- translations, fixes etc...
-
-2002/04/16 alus
-
- * share/po/pl.po: still working
- Few fixes
- Updated translation. Many strings is not yet translated...
-
-2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: only main version of automake
-
-2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated po file
-
-2002/04/16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
- dialog box
-
-2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: Another small fix
- Small corrections
-
-2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/mt.po: updated Maltese file
-
-2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: small typo correction
-
-2002/04/10 warly
-
- * share/rpmsrate: autofs -> 2
-
-2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
- and iptables
- packages conflict
-
-2002/04/09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm, partition_table_gpt.pm,
- partition_table_empty.pm, partition_table_bsd.pm,
- partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
- error message (thanks to Brian J. Murrell)
-
-2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed a bunch of things
-
- * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
- partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
- printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
- network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
- network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
- strings
-
-2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
- drakfloppy strings
-
-2002/04/07 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakfloppy: moving from his own rpm to drakxtools
-
- * Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 sdupont
-
- * standalone/drakbackup: please yduret, do not commit these changes on cvs
- before to test it.
- you can say "bugs fixes" only if you have corrected some errors but not
- if you create it!
- the backup on cd was disabled because the backend is not available for
- moment.
-
- * standalone/drakfont: remove uninteresting yduret changes,
- would it be possible to know what are your "bugs fixies" ?
- to yduret: I'm the creator of this program so please do not remove my
- changes.
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
- doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
- doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/02 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: do not have "root=" with no root (needed for memtest)
- (thanks to Borsenkow Andrej)
-
- * share/rpmsrate: add tmpwatch (since it is not mandatory any more)
-
-2002/03/30 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
- more mdkish..
-
-2002/03/26 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Fixed several problems related to HP
- multi-function devices:
- - Parallel multi-function devices worked only on the first (onboard)
- parallel
- port.
- - HP LaserJet 2200 needs HPOJ for printing via USB.
- - For the HP OfficeJet D series the scanning instructions were not
- shown.
- - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.
-
-2002/03/22 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: cleaned gtkpowerpack
-
-2002/03/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: use /root rather than /tmp for some temp files (security
- suxx)
-
-2002/03/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list: rpm 4.0.4
-
- * mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void
-
-2002/03/20 sdupont
-
- * standalone/drakfont: fixing problems
- exchanging: ttmkfdir by /usr/X11R6/bin/mkttfdir
- which generate correct fonts.dir
-
- * standalone/drakbackup: remove backup on cd
-
-2002/03/20 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: use log for what is not related to explanations
-
-2002/03/19 François Pons <fpons@mandrakesoft.com>
-
- * tools/updatehdlist: take care of commercial medium (not syncable).
-
-2002/03/19 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv:
- - default tv norm is pal rather than ntsc (because of alphabetical
- sort) since it's the most used tv norm
- - figure out tv norm & country (aka frequency table) from locales
-
- - add a hash based on lang in order to do this
-
- - add --no-guess if one doesn't want drakxtv to automagically guess tv
- norm and geographic area through locales (lang.pm)
-
- - log with standalone::explanations:
-
- - guessed values from locales: language, tv norm and country
-
- - runned command to scan for tv channels
-
- - ~/.xawtv creation
-
-
- - s/bcast/broadcast/ in displayed messages
-
- - add -h and --help support
-
-2002/03/18 dam's <damien@mandrakesoft.com>
-
- * install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API
-
-2002/03/18 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed to support rpm filename incoherent to standard
- naming for commercial
- packages (commercial are *really* shit (almost, for the hope) all the
- time ?)
-
-2002/03/16 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
- connection.
-
-2002/03/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/ar.po: updated po file
-
-2002/03/16 Pixel <pixel@mandrakesoft.com>
-
- * network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/16 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
- connection.
-
-2002/03/16 Pixel <pixel@mandrakesoft.com>
-
- * network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/15 fabman
-
- * share/po/es.po: updated bad lilo/grub/yaboot translation
- updated spanish translations
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: force mkinitrd *really* for bootsplash.
- force initrd regeneration for oem on some case (maybe the cause of
- bootsplash
- perturbation, as maintainer don't even known why it is running correctly
- :-)
-
- * pkgs.pm: do not try to get synthesis if hdlist is available as an handle
- on file (typical
- for updates).
-
- * share/rpmsrate: remove doublon on NVIDIA_nforce.
- update to 6mdk for NVIDIA_nforce*
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: yet again add some dropped entities from drakx-help.xml
- add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-
- * install_steps_interactive.pm:
- - remove obsolete code
- - the result is to use directly $availableC instead $size2install
- which was min($availableC, $max_size)
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: do not try to get synthesis if hdlist is available as an handle
- on file (typical
- for updates).
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: yet again add some dropped entities from drakx-help.xml
- add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
- s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
- drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
- drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po: updated po file
-
-2002/03/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakxtv: english
-
-2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/da.po, share/po/no.po: updated po files
-
- * share/po/eu.po: updated po file
-
- * lang.pm: changed LANGUAGE for basque
-
- * share/po/ja.po: added \n in advertising
-
-2002/03/14 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
- for english which has CHARSET"C", adding it
-
- * share/rpmsrate.server: obsolete
-
-2002/03/14 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv:
- - add SECAM to france description to ease user comprehension
- - remove unused variables
- - revert gc & dam's (also known as the usual suckers) garbage
- who'ven't the hardware to test:
-
- - explain in source why we don't try to install xawtv (see below)
-
- - just display a message if xawtv isn't installed
- since drakx should have installed it
-
- - let it be runned as root again (how many times i'm
- supposed to restore this behaviour)
-
- - retest with a tv card
-
- - use %ENV rather than relying on shell ~ expansion
-
- - if tv card wasn't detected, ask the user to spam us
-
- - factorize $in->exit() out of scan4tvchannels()
-
- - add to TODO list the possibility to install xawtv if needed
-
- - check scantv return value and display an error message
-
- - also if the wrapper was runned on console, display a nice
- message saying one can now run xawtv under X11
-
-2002/03/14 warly
-
- * share/rpmsrate: add commercial apps
-
-2002/03/14 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/logdrake: fix some bug
- fix * bug in field matching/ not matching
-
-2002/03/13 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: sync with oem (removed mach32 server).
- sync with oem.
- remove bzflag.
- synced with oem script.
-
- * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
- remove Mach8 and Mono driver for oem only.
- remove bzflag.
- fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
-2002/03/13 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: sync with oem (removed mach32 server).
- sync with oem.
- remove bzflag.
- synced with oem script.
-
- * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
- remove Mach8 and Mono driver for oem only.
- remove bzflag.
- fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
-2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/eu.po: updated po files
-
-2002/03/13 warly
-
- * share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
- * tools/oem-prepare: synced with oem script.
-
-2002/03/13 gbeauchesne
-
- * share/rpmsrate:
- - Add openoffice with weight = 2
-
-2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
- share/po/eu.po: updated po files
-
- * lang.pm: small console font changes
- set default console fotns for latin1/0 to lat1-16 and lat0-16;
- the font lat0-sun16 is missing some chars of iso-8859-1/15 !
-
-2002/03/13 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: add gcc and gcc-c++ in @preferred
-
-2002/03/13 warly
-
- * share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/12 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: onboot option only in expert mode
- corrected domainname bug; added onboot option
-
-2002/03/12 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup, standalone/drakfont: minor bug correction
-
- * standalone/net_monitor: greater timeout
-
- * network/tools.pm, network/netconnect.pm: changed timeout for testing
- internet connection
-
-2002/03/12 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: remove synthesis if not found (filesize is 0)
-
- * Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)
-
- * install_any.pm: added fix to support update hdlist renaming (ie hdlist
- of update are always hdlist.cz).
- remove old synthesis file, to make sure gzip can build a new one.
-
- * share/rpmsrate: added nforce support (hack by adding kernel version
- inside)
-
-2002/03/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/ga.po: fixed email address
-
- * share/po/zh_TW.po: updated po file
-
-2002/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
- meta_class
-
- * pkgs.pm: "fam" is not a naughtyServers
- remove the old "boa" comment
- adapt naughtyServers for 8.2
-
-2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few missing translations
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
- share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
- share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
- po files
-
- * share/po/eu.po, share/po/it.po: updated po files
- merged with new strings from manuals
-
- * share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals
-
- * share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
- share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
- share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
- share/po/cs.po, share/po/af.po: updated po files (finished merging with
- manual strings)
- updated po files
-
- * share/po/hu.po: updated po files
- updated po files
-
- * share/po/cy.po: updated po file
- updated po files
-
- * share/po/es.po: updated Spanish
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
- share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
- share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
- share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
- with manual strings)
-
-2002/03/11 dam's <damien@mandrakesoft.com>
-
- * Makefile.config: added drakproxy
-
- * standalone/drakxtv: added embedded mode
-
-2002/03/11 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: for updates, make tree as flat instead in order to
- see all packages.
-
-2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: webmin: 3
-
- * standalone/drakxtv:
- - install xawtv when necessary instead of
- telling people to use urpmi (titi sucks)
- - prints out a message when no tv card
- has been detected
-
- * share/po/fr.po: small ortograf
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
- from manuals
-
- * share/po/DrakX.pot: merged with new strings from manuals
- updated GErman file
-
- * share/po/de.po: updated GErman file
-
- * share/po/es.po: updated Spanish
-
-2002/03/11 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (fullname2mouse): workaround when "1 Button" is not found
-
- * install_steps.pm, install2.pm:
- - default security level now set in miscellaneousBefore
- - default security level is 3 in meta_class server
-
- * install_any.pm:
- - fix the setting of compssUsersChoices in auto_install when it is
- empty
- - set the default compssUsersChoices adapted to the server meta_class
-
- * share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
- the rate is 4, and it requires apache, and ...)
-
- * Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
- * install_steps_gtk.pm:
- - remove the hack for not displaying Utilities in classic meta_class
- - new compssUsers groups for the server meta_class
-
- * share/compssUsers: remove "Utilities" here instead of removing it
- hackily in install_steps_gtk
-
- * share/compssUsers.server: fix the path=Utilities for the Utilities
- section
-
-2002/03/11 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Small text fix.
- Security fix: Give a warning that SMB passwords can easily be revealed
- by normal users when printing on a Windows-hosted printer is set up.
-
- * detect_devices.pm: Reverted parts of the last change, they broke in
- non-DevFS environments (e. g. during installation).
-
-2002/03/11 warly
-
- * share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server
-
- * share/compssUsers.server: remove ICEWM choice
-
-2002/03/11 Yves Duret <yduret@mandrakesoft.com>
-
- * tools/cvslog2changelog.pl: added yduret entry in user.
-
-2002/03/11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
- card for XF3) (gégé report).
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/de.po, share/po/DrakX.pot: updated GErman file
-
-2002/03/11 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/interactive.pm (Mount_point): when files exist in the chosen
- mount point, propose migration
-
- * install_steps_interactive.pm: search /commercial/i instead of
- /Application/ before showing the commercial license
-
- * standalone/drakboot, bootloader.pm: fix Stew sucks
-
- * install2.pm, install_steps.pm:
- - default security level now set in miscellaneousBefore
- - default security level is 3 in meta_class server
-
- * install_steps_gtk.pm:
- - remove the hack for not displaying Utilities in classic meta_class
- - new compssUsers groups for the server meta_class
- search /commercial/i instead of /Application/ before showing the
- commercial license
-
- * install_any.pm:
- - fix the setting of compssUsersChoices in auto_install when it is
- empty
- - set the default compssUsersChoices adapted to the server meta_class
-
- * Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
- * share/compssUsers: remove "Utilities" here instead of removing it
- hackily in install_steps_gtk
-
- * share/compssUsers.server: fix the path=Utilities for the Utilities
- section
-
-2002/03/11 yduret
-
- * standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
- line.
-
-2002/03/10 chipaux
-
- * share/po/fr.po: Corrected few typo mistakes.
-
-2002/03/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: gcize damienization
-
- * share/rpmsrate: put userdrake together with drakconf so that
- userdrake is not missing (till)
-
-2002/03/10 siegel
-
- * share/po/help_xml2pm.pl: added tag filename
-
- * any.pm: added missing i18n _()
-
- * share/po/de.po: update
- and still fixes ...
- updates
- update
-
-2002/03/10 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Protect the Star Office/OpenOffice.org configuration against
- manual changing of the "update-alternatives" assignment of the "lpr"
- command.
-
- * detect_devices.pm: Made USB printer auto-detection more stable and
- reliable.
-
-2002/03/10 yduret
-
- * standalone/scannerdrake: added ASK DEVICE support
-
- * scanner.pm: added ASK support for more interactiveness during
- configuration
-
-2002/03/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: comply better to ClientID stuff
-
-2002/03/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated po file
-
-2002/03/09 yduret
-
- * standalone/scannerdrake: added sum up at the end
- uncomment line that checks if sane rpm is installed or not (thx gc).
- i sux,
-
-2002/03/08 dam's <damien@mandrakesoft.com>
-
- * standalone/drakproxy: drakproxy rewritten
- working drakproxy
-
- * install_steps.pm: corrected network up/down when network install
-
- * standalone/drakfont: ergonomy changed to fit in mcc
- corrected network up/down when network install
-
- * network/network.pm: proxy settings corrected
-
-2002/03/08 fabman
-
- * share/po/es.po: updated spanish translation
-
-2002/03/08 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
- conventions.
-
- * standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
- conventions.
-
- * Xconfigurator.pm: fixed possible additional XFree packages not installed
- if server is already
- installed.
-
-2002/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: missing translations + a few changes
-
- * mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
- to show up rather than seconds
-
-2002/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/it.po: updated po files
-
- * share/po/es.po: corrected typo
-
- * share/po/da.po: updated Danish file
-
- * lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
- locales-skeleton so non primary chinese encodings
- can work
-
- * share/po/ar.po: updated po file
-
- * share/po/cy.po: removed the "translation" of licence, it was random
- text.
-
-2002/03/07 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po, modparm.pm: corrected
-
-2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/newt-frontend.c: english fix thx to till & phil
-
-2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated po file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2002/03/07 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: removing quota choices for reiserfs
-
-2002/03/07 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: make gc happy
-
- * modparm.pm, share/po/fr.po: corrected
-
- * standalone/draknet: corrected network/internet restart when already
- connected
-
- * network/netconnect.pm: corrected bad previous behaviour
-
- * standalone/drakfont: corrected bad system command
-
- * share/advertising/02-internet_icon.png,
- share/advertising/05-contcenter_icon.png,
- share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
- share/advertising/08-games.pl, share/advertising/02-internet.pl,
- share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
- share/advertising/12-MDKstore_icon.png,
- share/advertising/06-user_icon.png,
- share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
- share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
- share/advertising/04-develop.pl,
- share/advertising/09-MDKcampus_icon.png,
- share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
- share/advertising/04-develop_icon.png,
- share/advertising/08-games_icon.png: changed icon sizes
-
-2002/03/07 fcrozat
-
- * share/rpmsrate: Evolution is not dependent on GNOME selection (not
- require gnome-core)
-
-2002/03/07 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: avoid destroying some files in /etc.
-
- * install_steps_interactive.pm: fixed package tree with a given medium.
-
- * any.pm: fix autologin sometimes activated without user intervention.
-
-2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: generate_automatic_stage1_params: also save
- the interface number in case the machine will
- have several interfaces; clean code a bit
-
- * mdk-stage1/network.c: better error msg regarding pcmcia net
- adapters supported either with pcmcia.img
- or network.img (amaury sucks)
-
- * install_steps_auto_install.pm: in replay mode, since
- $o->{interactiveSteps}
- exists, we can't simply ||= @graphical_steps,
- we need to push to ensure that the
- @graphical_steps is always honoured
-
- * standalone/drakgw:
- - call net_monitor to disable internet
- connection before network-restart
- - user return value when status'ing the
- initscripts rather than grepping their
- text output
-
- * modules.pm: try to avoid segfaulting probeall stuff
- add ns83820 gigabit (goes to other.img)
-
- * rescue/rescue-doc: english fixes thx to phil
-
-2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * standalone/drakfont: Added a missing _( ) around a text
-
- * share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
- po files
-
- * share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
- translations using argument switching (not yet handled by DrakX)
-
- * bootlook.pm, standalone/drakboot: i18n changes
-
- * keyboard.pm: corrected the locale->keyboard list building
- make keyboard selection choose first the 5 first chars of lang;
- then the 2 first chars;
-
- * share/po/eu.po: commented out the translations using argument switching
- (not yet handled by DrakX)
- updated po file
-
-2002/03/07 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix fileshare custom config
- fix *some* stew errors
-
- * bootloader.pm: "--timeout=" must be after terminal
- add --timeout=... for "terminal serial ..." line in grub's menu.lst
- fix *some* stew errors
-
- * install_any.pm: don't have the adsl & modem passwords in report.bug
-
- * detect_devices.pm (zips__faking_ide_scsi): fix returned value in
- standalone
- (getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
- error when there is no floppy)
-
- * fs.pm: removing quota choices for reiserfs
-
-2002/03/07 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
- functionality for PPC
-
-2002/03/07 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of network not being started by Printerdrake
- during installation.
-
-2002/03/07 warly
-
- * share/compssUsers.server, share/compssUsers, share/rpmsrate: update
- server, merge with normal rpmsrate
-
-2002/03/06 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file
-
-2002/03/06 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset (nfs_exports::update_server): ensure portmap is
- running
-
-2002/03/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected font stuff
-
- * standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.
-
- * pkgs.pm: fixed error when using multiple removable media and user
- aborted installation
- (for some other error) and hdlists cannot be retrieved.
- add save of synthesis too when partitions are reformated, so that urpmi
- is happy after.
- fixed when hdlist gives no new package (new name) but only obsoleted
- package or
- updated package, ie security updates may appreciate.
-
- * install_any.pm: update for newer pkgs module (fix for abort during
- installation).
-
- * rescue/tree/etc/oem: allow oem script to be executable from standard cd
- set (powerpack or other).
-
-2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po: updated po file
- updated pot file
-
- * share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
- updated pot file
- updated some po files
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2002/03/06 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: add @preferred libxpm4
-
- * lang.pm: fix typo in %xim (for chineese)
- - create the kde share/config's directory, so that kde config files
- are created in any case
- - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
- into account when ~/.i18n doesn't exist (thanks to F.Crozat)
-
- * install_any.pm: ensure the fstab is kept on upgrade
- (g_auto_install): use "interactiveSteps" field instead of pushing in
- @install_steps_auto_install::graphical_steps
-
- * standalone/localedrake: when called by kcontrol with --apply, don't
- modify kde config files, kcontrol takes care of it more nicely
-
- * diskdrake/interactive.pm: translate the actions
- choose to activate crypto. type password. unselect encryption. Select
- encryption again, you were not asked for password. Fixed
- use formatError
-
- * bootloader.pm (add_append): don't add to entries of type 'other'
-
- * devices.pm (find_free_loop): fix
-
- * install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
- on upgrade
-
- * fsedit.pm: do not allow encrypted /var
-
-2002/03/06 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: print an error message if xawtv isn't installed
- fix conflict between i18n and complete signal handler (ie return key
- and not value)
-
-2002/03/06 warly
-
- * share/rpmsrate: remove abiword
-
-2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
- i82365 :-((, ugly patch
-
-2002/03/05 warly
-
- * share/rpmsrate: add Fred Bastok modif
- remove too many duplicate in i18n packages that are now automatically
- added
-
-2002/03/05 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * modules.pm: Add USB2 controller
-
-2002/03/05 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected expert option in install mode
- added expert mode
-
- * my_gtk.pm: greater interstice
-
- * modparm.pm: cosmetic
- gzipped modules handled
-
-2002/03/05 fcrozat
-
- * share/rpmsrate: Install xlockmore when installing gnome, since
- xscreensaver can't lock
- root desktop..
-
-2002/03/05 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
- driver used.
-
- * install_steps.pm: added auto restore of some files (/etc/profile) needed
- by upgrade (from .rpmnew).
- added log for hasNetwork (so that we can understand why installUpdates
- do nothing).
-
- * crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
- (instead of ftp one).
-
- * fs.pm: fixed hd install to allow using specific directory.
-
- * install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
- /var/lib/urpmi, and
- furthermore uncompressed :-(
- fixed possible bug when generating synthesis file for urpmi
- installation.
-
-2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
- dhcp_hostname for stage2
-
- * install_any.pm: fix bug in generating automatic stage1
- params for http
-
- * modules.pm: aironet core sucking thing
-
-2002/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po: updated po files
-
-2002/03/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: if mem=nopentium is given on cmdline, have it after
- install
-
- * modules.pm (extract_modules): created (was done in load_raw)
-
-2002/03/05 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator.pm: use UseFBDev for r128 - PPC
-
-2002/03/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
- D series, HP LaserJet 33xx MFP.
- Fixed bug of printerdrake sometimes assuming the user has an MF device
- when he has typed the device file name in the expert mode.
-
-2002/03/05 yduret
-
- * bootlook.pm: fix nobody bug
-
- * standalone/logdrake: mail alert: use eval {} to catch wizcancel
-
-2002/03/04 dam's <damien@mandrakesoft.com>
-
- * modparm.pm: corected weirdness, I suck
-
-2002/03/04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fix scroll total to match reality.
- fixed interpretation of size of package when doing an install (this can
- be
- severe, need testing).
-
-2002/03/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cy.po, share/po/id.po: updated po file
-
-2002/03/03 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
- the widget and ask it the style->font. This *works*
- (gtkicons_labels_widget): pass the style instead of directly passing the
- font
-
-2002/03/03 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
- in the PostScript produced by these programs so that the Euro symbol is
- printed correctly.
-
-2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated po file
-
-2002/03/02 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: better name for windobe new 0x42 special id (their
- own LVM marker)
-
- * detect_devices.pm: better jaz detection (thanks to Randy Welch)
-
-2002/03/02 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
- po files
-
- * share/po/tr.po: updated po file
-
-2002/03/02 Pixel <pixel@mandrakesoft.com>
-
- * share/list: add lvreduce & lvextend
-
- * detect_devices.pm: fix ide zip name when there are already some other
- SCSI drives
- ZIPs and Jazz's are not floppies
-
- * diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
- adjust_* for normal partitions, even for destructive resizes
-
-2002/03/02 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix gc's bulshit
-
-2002/03/01 dam's <damien@mandrakesoft.com>
-
- * services.pm: corrected translation used for shell command
-
- * my_gtk.pm: style & font correction
-
-2002/03/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
- * rescue/tree/etc/oem: added ext3 support.
-
- * share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
- * install_any.pm: reset correct setup_postinstall_rpms calling.
- removed some card where 3D is not installed by default:
- Riva128, Radeon 8500 and Rage Mobility card.
- removed staling debug code.
- fixed bad copied package (if one is not found).
-
- * tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
- category.
-
- * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
- handling.
- only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few missing trads
- please translators, keep two newlines when
- there are two newlines in original string,
- it's on purpose
-
-2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated po files
-
- * share/po/fr.po: fixed two typos
- small corrections (non breakable spaces)
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
- Xdrakres completly obsolete)
-
- * standalone/localedrake: restrict localedrake to installed lang
-
- * lang.pm: restrict localedrake to installed lang
- add 'C' in %charset2kde_font (so that english has normal fonts)
-
- * bootloader.pm:
- - do not indent "disk=... bios=..."
- - $lilo->{first_hd_device} can be used to tell which drive is the
- first one
- for the BIOS. Useful when the bootloader is installed on a partition and
- not
- on the MBR.
- read "disk=/dev/xxx bios=0x8x" and save it
-
- * any.pm: restrict localedrake to installed lang
- ask which hard drive is the booting one when there is mixed kind of
- drives
- (scsi+ide, ide2+ide) and the bootloader is not installed on MBR
-
-2002/03/01 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Reduced the paths to search for Star/Open Office, on systems
- without these applications installed the search needed a significant
- time.
-
-2002/03/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
- * share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
- * install_any.pm: removed staling debug code.
- fixed bad copied package (if one is not found).
-
- * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
- handling.
- only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
- thx to david@eastcott.net
-
- * share/po/fr.po: please translators, keep two newlines when
- there are two newlines in original string,
- it's on purpose
-
-2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
- Xdrakres completly obsolete)
-
- * detect_devices.pm: add is_a_recent_computer()
-
- * any.pm: call dcop as user
-
- * lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
- switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15
-
- * bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it
-
- * mouse.pm: special case for non detected usb interface on a box with no
- mouse.
- we *must* find out if there really is no usb, otherwise the box may
- not be accessible via the keyboard (if the keyboard is USB)
- the only way to know this is to make a full pci probe
-
-2002/02/28 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: bugfixs
- corrected translation for crontab
-
- * modparm.pm: corrected modinfo path for isa modules during install
-
-2002/02/28 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: try to fix if no chosen width has been found.
- removed Radeon 8500 from DRI capable cards.
-
- * rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
- used by urpmi)
- added a2ps as a bonus (it fetch tetex where oem limited disk usage do
- not agree
- a lot).
- fixed bad copy of install packages.
-
- * tools/oem-prepare: added curl as a bonus for oem install (it will be
- used by urpmi)
- added a2ps as a bonus (it fetch tetex where oem limited disk usage do
- not agree
- a lot).
- fixed bad copy of INSTALL packages.
-
-2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: more precise msg when can't access kernel modules because
- we still have many dumb people on cooker asking what's going on
-
- * install_steps_interactive.pm: small english fix
-
-2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/de.po, share/po/no.po: updated po files
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
- * share/po/sv.po: updated Swedish file
- updated pot file
-
-2002/02/28 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
- "no" could be either "no-dvorak" or "no-latin1")
-
- * keyboard.pm (loadkeys_files): ensure each file appear only once
-
-2002/02/28 siegel
-
- * share/po/de.po: and another part of updates
- updates
-
-2002/02/28 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: last translation but not least.
- further updates
- update french translation
-
-2002/02/28 dam's <damien@mandrakesoft.com>
-
- * share/themes-marble3d.rc: rechanged bg for camille
-
- * standalone/drakbackup: corrected translation for crontab
-
-2002/02/28 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed bad copy of install packages.
-
- * tools/oem-prepare: fixed bad copy of INSTALL packages.
-
- * Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.
-
-2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
- so dumb
-
-2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_TW.po: updated Chinese file
-
-2002/02/28 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
- "no" could be either "no-dvorak" or "no-latin1")
-
- * keyboard.pm (loadkeys_files): ensure each file appear only once
-
- * bootloader.pm: add "nowarn" in lilo.conf
-
- * install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
- and for "diskdrake --nfs"
-
-2002/02/28 sdupont
-
- * standalone/drakfont: including 'su' mode on drakfont.
-
-2002/02/28 siegel
-
- * share/po/de.po: updated missing strings
-
-2002/02/28 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Re-activated function to specify a CUPS server in
- another network and to switch to manual CUPS configuration.
- - Fixes/Improvements on Star Office/Open Office support:
- o When one switches the spooler, the entries of the printers under the
- old spooler are removed from Star Office/Open Office
- o Printers on remote CUPS servers (which are known through
- broadcasting)
- can be added to Star Office/Open Office
-
- * share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
- it is needed by printerdrake.
-
- * printer.pm:
- - Fixes/Improvements on Star Office/Open Office support:
- o When one switches the spooler, the entries of the printers under the
- old spooler are removed from Star Office/Open Office
- o Printers on remote CUPS servers (which are known through
- broadcasting)
- can be added to Star Office/Open Office
-
-2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: updated Basque file
-
-2002/02/27 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm:
- - Improved fully automatic adding of printer queue:
- o Ask for a queue name if more than one printer is detected
- o Let user confirm the model automatically chosen from the database
- o Set correct paper size according to the language/country
- - When one chooses a "CUPS + GIMP-Print" driver now all important
- options
- are displayed directly (without needing "Advanced" button).
- - Made less warning appearing on the console from where "printerdrake"
- was
- called.
-
-2002/02/27 fabman
-
- * share/po/es.po: converted to UTF-8
-
-2002/02/27 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: fix missing version listed when doing update.
-
-2002/02/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few translations
-
- * mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
- rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue
-
- * install_steps_interactive.pm: formatAlaTex for congratz msg
- xfs + bootdisk = warning_msg
-
- * share/rpmsrate: flightgear is now fully lowercase
- glaxium
-
- * mdk-stage1/pcmcia_/probe.c: add Keld Jĝrn Simonsen <keld@dkuug.dk>'s O2
- Micro
- CardBus controller, and two other PCI entries which
- have close descriptions
-
- * mdk-stage1/pcmcia_/merge_from_pcitable: misc
- also report when pcitable is "too old"
- write a short perl program to easily merge new
- cardbus controllers from pcitable into probe.c
-
-2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: updated po file
-
-2002/02/27 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: simplify pyDict
-
- * install_steps_interactive.pm: ensure a keyboard is only once available,
- either in advanced or normal, but
- not in both (tx2fredl)
-
- * share/po/da.po:
- - it is UTF-8
- - fix line splitting
-
- * lang.pm: workaround iso-8859-1 charset based languages not displayed
- correctly at install
- - %lang2country is the authority, so if the country given by
- %lang2country doesn't exist in KDE, return C
- - fix be,sp,sr
- - s/def/default/ (typo)
- - add some utf kde fonts
-
-2002/02/27 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: update french translation
-
- * standalone/drakxtv:
- - simplify an ACTION||fallback;fallback into ACTION;fallback
- - print a message saying that xawtv can be used now at the end of the
- channels auto-probing in case of direct use from cl and not from
- XawTV wrapper (from qa test) aka let the world be better :-)
-
- * share/po/br.po: minor update
- update brezhoneg translation
-
-2002/02/26 dam's <damien@mandrakesoft.com>
-
- * modparm.pm: corrected bad sprintf
-
-2002/02/26 fabman
-
- * share/po/es.po: updated spanish translations
-
-2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version 8.2
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
- diskdrake/interactive.pm: propose some mount points for
- removable/nfs/smb
-
- * install_steps_interactive.pm: if no sound card are detected AND the user
- selected things needing a sound card, propose a special case for ISA
- cards
-
- * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
- when asked for a ISA
- sound card)
-
- * my_gtk.pm (@icon_paths): ease testing
-
-2002/02/26 siegel
-
- * share/po/de.po: updates
-
-2002/02/26 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: corrected ttf/TTF and xfs restart
-
- * share/logo-mandrake.png: new logo
-
-2002/02/26 fabman
-
- * share/po/es.po: updated spanish translations
-
-2002/02/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix translation of test program.
-
-2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)
-
- * share/po/fr.po:
- - explain where to put nbsp spaces, explain
- what's nbsp spaces, explain how to compose them
- - add a few missing nbsp spaces
- - translate a few more things
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * any.pm: fixed English typo
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
- diskdrake/interactive.pm: propose some mount points for
- removable/nfs/smb
-
- * Xconfigurator.pm: make perl_checker happy
- have "Ok More Show all" instead of "Ok Cancel Show all"
- set the locale properly instead of setting the translated messages in
- the script
-
- * any.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- (devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
- symlink in lib/dev-state
-
- * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
- when asked for a ISA
- sound card)
- add xine in VIDEO 4
-
- * install_steps.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- don't add mem=nopentium anymore. kernel people says it's not needed and
- bad
- for performance. It also means any bug must be addressed to them
- create /dev/dvd for DVDs
-
- * my_gtk.pm (@icon_paths): ease testing
-
- * lang.pm: create bindtextdomain which does only part of the load_mo job
-
- * install_steps_interactive.pm: if no sound card are detected AND the user
- selected things needing a sound card, propose a special case for ISA
- cards
-
- * detect_devices.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- cleanup
-
- * fs.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
-
-2002/02/26 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
- 1152x864
-
-2002/02/26 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
- we support rxvt
- and xterm but konsole too.
- the only one missing is gnome-terminal which has -t but not -T
- update comments
- - remove useless "no_edit => 1"
- - use interactive_gtk to determine if we're runned under X11 (ie
- authorized acces to X11 server, X11 context, ...)
- - add a note to remember that we should add a method to detect if we
- run under X11 if/when we implement interactive_qt
- - simplify code :
- * remove is_tv and simplify its code to be a one-liner (replace a
- foreach by a scalar context)
- * use format to prevent reverse lookup on scantv run thus
- enabling to reverse the initial hash table
- - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
- hw.
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated po file
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated po file
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/25 dam's <damien@mandrakesoft.com>
-
- * any.pm, modparm.pm: corrected modules parameters functions
-
- * standalone/drakfont: debug
-
-2002/02/25 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
- nasty pixel displayed using syslinux-1.67-3mdk
-
-2002/02/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: don't put accents for bootloader, we can just use 7bit
- chars
- (titi sucks bigtime)
- add a few nbsp spaces
-
- * rescue/list: add mt-st DAT stuff for joeghi (ghibo)
-
-2002/02/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2002/02/25 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: ignore-table is a global flag, so put it there (when
- needed)
-
- * standalone/drakboot: add --testing
-
- * modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
- ide zips
-
- * install_steps_interactive.pm: sort the list of keyboards
-
-2002/02/25 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: fix a typo (thanks gc)
-
-2002/02/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
- share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
- share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
- share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
- share/po/eu.po: updated some po files
-
-2002/02/24 Pixel <pixel@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: fix permission
-
-2002/02/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cy.po, share/po/Makefile: updated Welsh file
-
- * share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
- share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file
-
- * install_steps_interactive.pm: removed useless _( ) around a string
- displayed in English only
-
- * share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
- share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
- share/po/af.po: updated some po files
-
-2002/02/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive_newt.pm:
- - use simplify_string to ensure multi-line and too long strings are
- not used
- (hacky, but no other solution)
- - set $::setstep like interactive_gtk is doing (??)
-
- * partition_table_empty.pm: handle MBR containing the same character (0 or
- "l")
-
- * diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
- nicer newt version)
-
- * devices.pm (devices::make): following a good advice from Andrej
- Borsenkow, return the
- file even if the device file doesn't exist the caller will fail or not.
- The
- advantage is better compatibility than raising an exception
- devices::make doesn't mknod with devfs
-
- * detect_devices.pm: no need to catch the exception from devices::make
- anymore
- devices::make doesn't mknod with devfs
-
- * fs.pm: nicer error message when mount fails
-
- * share/rpmsrate: adding gphoto2
-
- * install_steps_interactive.pm: when passwords do not match, focus on
- first password entry, not the second (thanks to garrick)
-
- * Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
- it's already handled in Xconfigurator.pm
-
- * my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
- (thanks to garrick)
-
- * modules.pm: remove "-f" option for insmod
-
-2002/02/23 siegel
-
- * share/po/de.po: fixed silly error
- updates
-
-2002/02/23 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of printers
- in Star Office and Open Office.
-
-2002/02/22 dam's <damien@mandrakesoft.com>
-
- * share/advertising/02-internet.pl, share/advertising/07-server.pl,
- share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
- share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
- share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
- share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
- share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
- share/advertising/08-games.pl: corrected advertising text
-
- * share/po/fr.po: corrected bad translation
-
- * my_gtk.pm: corrected icon paths
-
-2002/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: exit the pur_gtk version after launching the wizard
- version
-
- * any.pm: better rephrasing
- change name and description of security levels
-
- * share/rpmsrate: powermanga: 2 -> 3
-
-2002/02/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/DrakX.pot: updated Danish file
-
- * lang.pm: start of support of kde fonts
- fixed some keyboard names
-
- * keyboard.pm: fixed some keyboard names
- added the two ?win_toggle choices
- some info useful for keyboard handling
-
- * share/keyboards.tar.bz2: fixed some keyboard names
-
- * share/po/hu.po: updated hungarian file
-
-2002/02/22 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: even smarted process to kill selection
-
- * lang.pm: fix 2 entries in charset2kde_font
- - remove non needed entries in lang2country
- - fix syntax errors
- - rename kdefont in charset2kde_font
- - much cleanup
- use invalid instead of unknown for errors when checking
- put back the less deep langs
- have the tree less deep (esp. nicer when not displaying UTF-8 entries)
- not translating in console installs (esp. newt) when the font is missing
- restrict the langs displayed to non utf8 during install
- fix warning message
- disable perl warnings when checking
- make perl_checker happy
-
- * devices.pm: add atibm (thanks to Robin Pollard)
-
- * bootloader.pm: put ignore-table to disable lilo's partition table
- checking
- (esp. the checking of the CHS geometry vs linear geometry)
-
- * Xconfigurator_consts.pm: fix syntax typo
-
- * Makefile:
- - exclude urpm from perl_checker
- - add checking keyboard.pm
-
- * install_steps_interactive.pm, install2.pm, install_steps.pm: not
- translating in console installs (esp. newt) when the font is missing
-
- * keyboard.pm: use invalid instead of unknown for errors when checking
- change the message
- disable perl warnings when checking
- - add checks for the various data structures
- - fix another typo for usb2drakxkbd
- fix typo
-
- * share/rpmsrate: add procmail in SYSTEM 4
- add samba-doc samba-winbind samba-swat
-
- * Xconfigurator.pm: workaround set_active failing
-
- * any.pm: use the setupBootloader help instead of setupBootloaderGeneral
- restrict the langs displayed to non utf8 during install
-
-2002/02/22 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv: update TODO list;
- explain what is HRC
-
- * share/po/fr.po: further translations
- update french translation
-
-2002/02/21 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected icon list
-
-2002/02/21 fabman
-
- * share/po/es.po: updated spanish po file
-
-2002/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: spacecup no more exists
- armagetron is nice, no use to install gltron as well
- autoconf2.5 and automake1.5
-
- * interactive.pm: when not in X and needs su, use consolehelper now
- use consolehelper when no "kdeinit: kwin" process
- is running
-
-2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
- at the same time
-
- * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
- getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
- * share/rpmsrate: add kinput2-wnn4
-
-2002/02/21 siegel
-
- * share/po/de.po: update
-
-2002/02/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Removed "Manual configuration" button when "Local
- Printer" dialog is started from the queue modification menu (Recommended
- mode).
- Improved matching of printer names resulting from auto-detection with
- names in the database.
-
-2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: final batch of typos fixes (next time, please run a
- check speller)
- fix more typos
- update french translation;
- fix typos
-
- * diskdrake/interactive.pm: shorter displayed message
-
-2002/02/21 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: changed button label
-
- * standalone/icons/gmon.png, standalone/icons/categ.png,
- standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
- standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
- standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
- standalone/icons/ic82-back-up-16.png,
- standalone/icons/wiz_scannerdrake.png,
- standalone/icons/ic82-discdurwhat-40.png,
- standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
- standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
- standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
- standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
- standalone/icons/wiz_default_up.png,
- standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
- standalone/icons/ic82-systemeplus-40.png,
- standalone/icons/ic82-back-up-48.png,
- standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
- standalone/icons/ic82-moreoption-40.png,
- standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
- standalone/icons/wiz_printerdrake.png,
- standalone/icons/wiz_default_left.png,
- standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
- standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
- standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
- standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
- standalone/icons/ic82-where-40.png: added new gfx only standalone
-
- * pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
- pixmaps/ic82-system-40.png, pixmaps/net_c.png,
- pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
- pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
- pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
- pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
- pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
- pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
- pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
- pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
- pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
- pixmaps/wiz_draknet.png, pixmaps/net_d.png,
- pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
- pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
- pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
- pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
- pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
- pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
- pixmaps/wiz_scannerdrake.png: removed gfx not used during install
-
-2002/02/21 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: fixed another not seen 8.1 reference in label.
- fixed 8.1 release hard coded.
-
-2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fi.po: updated pot file
- updated Finnish file
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21 Pixel <pixel@mandrakesoft.com>
-
- * share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
- install_gtk.pm, share/themes/DarkMarble-button3_out.png,
- share/themes.rc, share/themes/blueHeart-brown_bg1.png,
- share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
- share/themes/DarkMarble-check_on.png,
- share/themes/blueHeart-button1.png,
- share/themes/DarkMarble-check_off.png,
- share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
- share/themes/DarkMarble-button3_in_prelight.png,
- share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
- blueHeart themes
-
- * bootloader.pm: have devfs=nomount for failsafe
-
- * Makefile.config, share/po/Makefile: make a difference between PMS and
- ALLPMS. For install, only use PMS
-
- * lvm.pm: ensure lvm tools don't need to be all installed at the same time
-
- * Makefile: template.in stuff removed
- make a difference between PMS and ALLPMS. For install, only use PMS
-
- * pkgs.pm: smarter choosing of processes to kill
-
- * tools/i386/netboot/make_boot_network: cleanup
-
- * modules.pm: add aic7xxx_old
-
- * install_any.pm: ensure lvm tools don't need to be all installed at the
- same time
- (remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
- DarkMarble theme is removed
- (kdeicons_postinstall): remove this obsolete code
- no special case for installing imwheel
-
- * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
- getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
- * network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
- comment
-
-2002/02/21 siegel
-
- * share/po/de.po: update
- snapshot
-
-2002/02/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added "type => 'list'" to the printer modification
- menu, it appeared as a drop-down list during the installation.
-
-2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv: more translatable strings;
- hide scantv output on console;
- check that we're under X11 before running scantv in an xterm
-
-2002/02/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
- first line comment no more necessary
- s/row/column/, silly me
-
- * standalone.pm: explanations stuff: no reason to use "updated" at a place
- when we
- use "modified" at the rest of the locations..
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
- updated Spanish file
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (ejectCdrom): display "files still open:" for all
- processes when umounting fail
-
- * pkgs.pm: much simpler & stronger killing of still running processes
-
- * mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry
-
-2002/02/20 dam's <damien@mandrakesoft.com>
-
- * share/themes-marble3d.rc: updated theme
-
- * network/adsl.pm: mgmt install corrected
-
-2002/02/20 daouda
-
- * share/rpmsrate:
- - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20 fcrozat
-
- * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
- DrakX and newer method to select INSTALL packages.
-
- * standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
- urpm library instead of
- parsing (now removed) depslist.ordered file.
-
- * Xconfigurator.pm: fixed default value if selecting a card (use previous
- one or existing one).
- added XFree 4 driver choice if Other|Unlisted is chosen.
- fixed cancel on card selection so that previous choice is not lost.
-
- * Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
- listing XFree 4 drivers.
-
-2002/02/20 gbeauchesne
-
- * share/rpmsrate:
- - Add gcc3.0-c++ and libstdc++3.0-devel
- - Prefer gcc3.0-java over gcc-java
- - Remove BasiliskII-sheepnet since it does no longer exist
- - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated FRench file
-
- * share/po/es.po: updated Spanish file
- updated Spanish file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix s/SILO/LILO/
-
- * fsedit.pm: have "with /usr" translated
-
- * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
- button
-
- * steps.pm: move installUpdates after configureX (workaround for bad
- timeouts during installing updates)
-
- * install_steps.pm, any.pm, standalone/draksec: factorize and update the
- reading of previous security level
-
-2002/02/20 siegel
-
- * share/po/de.po: update
-
-2002/02/20 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update french translations
-
-2002/02/20 dam's <damien@mandrakesoft.com>
-
- * share/advertising/13-Nvert.pl: changed toll free
-
- * my_gtk.pm: added mcc kill if wait message
-
- * standalone/logdrake: cosmetic change, mcc compliance
-
-2002/02/20 daouda
-
- * share/rpmsrate:
- - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20 fcrozat
-
- * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
- file when changing cd (was an
- limitation in read_rpmsrate when a package having a category and INSTALL
- caused
- INSTALL to be dropped).
-
-2002/02/20 gbeauchesne
-
- * share/rpmsrate:
- - Add gcc3.0-c++ and libstdc++3.0-devel
- - Prefer gcc3.0-java over gcc-java
- - Remove BasiliskII-sheepnet since it does no longer exist
- - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
- English strings
-
- * share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
- Spanish files
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove fsck_option (obsolete)
-
- * share/po/fr.po: fix s/SILO/LILO/
-
- * fsedit.pm: have "with /usr" translated
-
- * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
- button
-
- * steps.pm: move installUpdates after configureX (workaround for bad
- timeouts during installing updates)
-
- * install_steps.pm, any.pm, standalone/draksec: factorize and update the
- reading of previous security level
-
-2002/02/20 siegel
-
- * share/po/de.po: snapshot
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19 fcrozat
-
- * share/rpmsrate:
- -Install gnome-vfs-extras when installing nautilus (to get samba
- browsing)
- -don't install nautilus-mozilla, it is pulled by nautilus
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: english fix
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
- * diskdrake/smbnfs_gtk.pm: ugly hack to fix die
-
-2002/02/19 siegel
-
- * share/po/de.po: updates for beta 3
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
- $prefix in front of /var/* when missing
- since we give "lilo.conf" in drakbug_report, let's also
- give "menu.lst"
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
-2002/02/19 siegel
-
- * share/po/de.po: updates for beta 3
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: setting help
-
- * share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
- share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
- share/advertising/12-MDKstore_icon.png,
- share/advertising/06-user_icon.png,
- share/advertising/04-develop_icon.png,
- share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
- share/advertising/06-user.png, share/advertising/02-internet_icon.png,
- share/advertising/04-develop.png,
- share/advertising/05-contcenter_icon.png,
- share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
- share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
- share/advertising/02-internet.png, share/advertising/07-server_icon.png,
- share/advertising/01-gnu.png, share/advertising/08-games.png,
- share/advertising/09-MDKcampus.png,
- share/advertising/09-MDKcampus_icon.png,
- share/advertising/08-games_icon.png: re-adding with -kb
- removing for re-adding with -kb
- added advertising for translation
-
- * share/advertising/essi.p: blah
- added advertising for translation
-
- * my_gtk.pm: new icon handler
-
- * Makefile.config: addde share/advertising/*.pl for translation
-
- * share/advertising/Makefile: new Makefile to install ads
-
- * share/advertising/00-thanks.pl, share/advertising/06-user.pl,
- share/advertising/08-games.pl, share/advertising/list,
- share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
- share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
- share/advertising/02-internet.pl, share/advertising/07-server.pl,
- share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
- share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
- share/advertising/03-graphic.pl: added advertising for translation
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
- $prefix in front of /var/* when missing
- since we give "lilo.conf" in drakbug_report, let's also
- give "menu.lst"
-
-2002/02/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
- * install2.pm: anchor the -IP match at the end of the string
- move loading /tmp/network from stage1 before doing the auto_install
- stuff to
- allow the -IP feature on auto_install file name
-
- * share/rpmsrate: add grub in 4 SYSTEM
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * standalone/printerdrake, printer.pm: Assured that the default page size
- is "Letter" for US/Canada and "A4" for the rest of the world.
- The "Description" field of a printer queue is filled in with printer
- manufacturer and model by default.
- Removed unused varaiables in /usr/sbin/printerdrake.
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
- Assured that the default page size is "Letter" for US/Canada and "A4"
- for the rest of the world.
- The "Description" field of a printer queue is filled in with printer
- manufacturer and model by default.
- Removed unused varaiables in /usr/sbin/printerdrake.
-
- * install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
- "Letter" so that Foomatic recognizes
- the paper sizes.
- Also use "Letter" paper for "en_CA" and "fr_CA" locales.
-
-2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: when no net device found, print a msg to tell
- that now most pcmcia network adapters are supported
- with network.img
-
-2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
- share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
- share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
- share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
- share/po/zh_TW.po, share/po/it.po: updated pot file
-
-2002/02/18 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm, standalone/localedrake:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
-
- * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-2002/02/18 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/02/18 fcrozat
-
- * share/rpmsrate: Install Guppi when installing gnumeric
-
-2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: titi sucks again
-
-2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po: updated Slovak ile
- updated pot file
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- updated pot file
-
-2002/02/18 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm:
- - remove media_type cdrom-burner, use {capacity} instead
- - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
- * diskdrake/smbnfs_gtk.pm:
- - add Cancel
- - move "click here" in "Search servers" on the right side
- - remove Export
- - fix bug
-
- * share/rpmsrate: raise xsane in SCANNER (Yves Duret)
- raise mkisofs & cdrecord in BURNER
-
- * Xconfigurator.pm: workaround not having the right to connect to our new
- created test server.
- info about the pb (sorry for the french):
- quand on lance le serveur
- - via xdm/kdm/startx, ca utilise xauth, xhost est fermé
- - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilisé
- *sauf* si X/xinit est lancé à partir d'un X *et* .Xauthority est non
- vide.
- dans ce cas, xhost est fermé, et aucun xauth n'est ajouté
- une conséquence, c'est que XFdrake ne peut pas accéder au X de
- test si XFdrake est lancé sous X ou "xauth list" est non vide
- exception: quand on lance le xdm/kdm en root, xhost n'est pas
- fermé,
- pas contre il est fermé en root & startx.
-
- * any.pm (fileshare_config): rework the custom message and launch
- userdrake
- (report_bug): add lilo.conf
-
- * standalone/localedrake:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
- change the message & ask wether to logout or not
-
- * lang.pm:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
- (lang2kde_lang): add missing valid_kde_langs
- fuzzy language finding between available langs when it doesn't match
- (useful for upgrades where fr_FR was fr_FR@euro)
-
- * diskdrake/interactive.pm: remove cdrom-burner from media_type set
-
- * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
- * fs.pm (mount_options_unpack): add usrquota and grpquota for
- ext2/ext3/reiserfs/xfs
- - remove media_type cdrom-burner, use {capacity} instead
- - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
- * share/compssUsers: add EDITORS in Development/Development
- add EDITORS in Development/Development
-
-2002/02/18 yduret
-
- * bootlook.pm: remove aurora part (commented for the moment)
-
- * standalone/scannerdrake: HP OfficeJet support
- scsi/parport preliminary support
-
- * scanner.pm: update
- scsi parport preliminary support
- no more show unsupported scanner
- common output for ScannerDB update from sane *.desc files and from
- usbtable
-
-2002/02/17 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/interactive.pm: warn_if_renumbered now also done at install
-
-2002/02/17 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: have icewm-light in any case (to be used as a failsafe
- window manager)
- add hotplug, usbutils and usbview with the new flag USB
-
- * install_any.pm: hotplug now handled via rpmsrate and the USB flag
- add some log to know why umounting /tmp/image fail
-
- * diskdrake/interactive.pm: warn_if_renumbered now also done at install
- force scalar context for warp_text
-
- * share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
- remove entities
-
- * share/po/Makefile (clean): remove .memdump
-
- * any.pm (autologin): do not allow empty user name since no autologin can
- already be achieved by choosing "No"
-
- * install2.pm: do not use run_program::xxx, use directly "system" so that
- stdout is kept unchanged during "postInstall" execution
-
- * network/smb.pm: fix typo (s/nfs/smbfs/)
-
-2002/02/17 siegel
-
- * help.pm: new version for 8.2
-
- * share/po/de.po: new german version
-
- * share/po/help_xml2pm.pl: added check for missing xsltproc
- fix perl warnings after adding -w
-
- * share/po/.cvsignore: added .memdump
-
- * share/po/Makefile: allow me to work with a symlink to doc in this
- directory
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm:
- - LVs "device" field were containing "/dev/vg/number" whereas it must
- be "vg/name"
- - added lv_resize
-
- * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
- * crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * Xconfig.pm:
- - prefer XKB available from existing XF86Config over
- /etc/sysconfig/keyboard KEYTABLE
- - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB
-
- * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
- * interactive_newt.pm: do not trash error messages if testing
-
- * lang.pm (country2lang): created
- (write): ensure it doesn't fail when kdeglobals is not writable (eg: the
- directory doesn't exist)
- (list): return the languages in a "specific" order (favours non utf8
- over utf8)
-
- * crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
- * install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
- have any SCSI interfaces" instead
- of assuming there is a SCSI interface and asking the driver name
-
- * lvm.pm:
- - LVs "device" field were containing "/dev/vg/number" whereas it must
- be "vg/name"
- - added lv_resize
- - call pvcreate with "-y -ff"
- - created LVs are notFormatted
-
- * interactive.pm:
- - fix non X + testing + su
- - since "interactive" takes care of "format" for type "combo", remove
- "format" (so that interactive_newt which switch to type "list" don't
- apply
- "format" once again)
-
- * standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (country2lang): created
- (write): ensure it doesn't fail when kdeglobals is not writable (eg: the
- directory doesn't exist)
- (list): return the languages in a "specific" order (favours non utf8
- over utf8)
- fix call to update_gnomekderc
-
- * standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
- and Slovak files
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm: fix call to update_gnomekderc
- remove unused & unneeded special %lang2kde_lang
- - add lang::check
- - fix utf-ko -> utf_ko
- - fix utf-14 -> utf_14
- - modify share/config/kdeglobals
- - add charset2kde_charset, lang2country, lang2kde_lang
-
-2002/02/15 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: embedded mode correction
-
- * my_gtk.pm: highlight in gtk icon widget
-
- * share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
- share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
- share/step-orange-on.xpm, share/step-green-on.xpm,
- share/step-red-click.xpm: new gfx
- new gfx
-
-2002/02/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
- share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
- share/po/eu.po: updated Basque file; fixed a msgid change
-
- * share/po/sv.po: updated Swedish file
- updated Basque file; fixed a msgid change
-
-2002/02/15 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm: remove assigning STDIN to /dev/null since:
- - programs should not use STDIN
- - the "postInstall" script for auto_install's is more happy still
- having the STDIN.
-
- * diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
- pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
- pixmaps/smbnfs_server.png: add icons showing if a mount-point is
- associated or if the share is mounted
-
- * pkgs.pm: fix typo
-
- * diskdrake/interactive.pm: use the new warp_text
-
- * install_steps.pm: use lang::charset2kde_charset
-
- * standalone/localedrake: lang::write doesn't need the filename anymore
-
- * any.pm: use 'combo' instead of 'type' for bootloader choice and security
- choice
- (requested by fredb&dadou)
-
- * interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text
-
- * interactive.pm: favour "combo" over "list" in any case
-
- * Makefile (check): add lang::check checking
-
-2002/02/15 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update translation
-
-2002/02/14 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
- * network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
- with more code sharing
-
- * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
- feature
-
- * my_gtk.pm (ctree_set_icon): new function
-
- * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
- mount-point is associated are coming
-
- * standalone/diskdrake: fix expert and testing options handling
-
-2002/02/14 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: embedded mode
- drakfont embedde mode
-
- * share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
- share/step-orange-on.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-red-click.xpm,
- share/step-green-on.xpm: new gfx
-
-2002/02/14 erwan
-
- * tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
- tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
- tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
- tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
- tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
- tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
- tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
- tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
- tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
- tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
- tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
- tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
- tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
- tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
- tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
- tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
- tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
- tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
- tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
- tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
- tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
- tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
- tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
- tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
- tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
- tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
- tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
- tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
- tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
- tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
- tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
- tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
- tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
- tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
- tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
- tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
- tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
- tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
- tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
- tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
- tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
- tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
- tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
- tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
- tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
- tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
- tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
- tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
- tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
- tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
- version of grub (0.91) with allstage and pxegrub
-
- * tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
- tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
- tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
- tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
- Fixning some file missing in netboot
-
-2002/02/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed obsoletes management according to urpmi code.
-
-2002/02/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
- share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
- CVS put a rule in Makefile to
- don't use them (thanks Thierry)
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/pt_BR.po: updted Brazilian file
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
- share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
- share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated some po files; removed the ones
- too lowly translated for the 8.2
-
- * share/po/vi.po: updated Vietnamese file
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/Makefile: Instead of temporary removingfiles from CVS put a
- rule in Makefile to
- don't use them (thanks Thierry)
-
-2002/02/14 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
- * network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
- with more code sharing
-
- * interactive.pm: if testing, don't use kdesu
-
- * install_steps.pm: gzip report.bug
-
- * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
- feature
-
- * standalone/diskdrake: fix expert and testing options handling
-
- * my_gtk.pm (ctree_set_icon): new function
-
- * c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
- still needed :-(
- #include iconv.h is needed even when C_RPM is undefined
-
- * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
- mount-point is associated are coming
-
-2002/02/14 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/br.po: update
- convert to utf-8
-
- * standalone/drakxtv: uses xawtv internal strings instead of frequencies
- tables ids as values
- in %freqtables in order to enhance drakxtv robustness when
- translators'll
- arrive. thus we'll pass right strings to scantv instead of translated
- ones
- explain how we manage the "all frequencies" case
- display sorted tv norms
-
-2002/02/13 erwan
-
- * tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
- missing file on netboot
-
- * tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
- grub in netboot
-
-2002/02/13 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: avoid generating headers for copying file in
- postinstall-rpm directory.
- make sure not to crash if a package that should have been in CD1 is
- somewhere
- else.
- fixed stupid typo.
- removed all @needToCopy... variables and now use INSTALL category in
- rpmsrate.
-
- * share/rpmsrate: updated INSTALL category with the merge of DrakX
- obsoleted list (it will use
- INSTALL now :-)
-
- * pkgs.pm: added extension to setSelectedFromCompssList.
-
- * share/rpmsrate.server: synced INSTALL category with standard rpmsrate.
-
-2002/02/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Danish and Hungarian files
-
- * share/po/da.po: updated Danish file
- updated Danish and Hungarian files
-
-2002/02/13 Pixel <pixel@mandrakesoft.com>
-
- * network/nfs.pm: $server->{ip} is no more mandatory
-
- * network/smb.pm: don't show shares ending with "$"
- $server->{ip} is no more mandatory
-
- * any.pm (setupBootloader): switch from "list" to "combo"
-
- * fs.pm (fstab_to_string): unsetting mount points in standalone will now
- work
- - handle WORM type in /proc/scsi/scsi
- - added media_type cdrom-burner
- - adapting to new media_type
- - nicer fd&hd testing
-
- * diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default
-
- * detect_devices.pm, diskdrake/interactive.pm:
- - handle WORM type in /proc/scsi/scsi
- - added media_type cdrom-burner
- - adapting to new media_type
- - nicer fd&hd testing
-
-2002/02/13 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: When one visited the help page of a remote CUPS printer
- afterwards the full
- printer modification menu was shown, not only the one for remote CUPS
- printers. This is fixed now.
-
-2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files
-
- * share/po/cs.po: updated Czech file
- updated Czech and Walloon files
-
-2002/02/12 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-2002/02/12 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm: In the USB auto-detection checked whether and where
- the device node was
- created.
-
-2002/02/12 dam's <damien@mandrakesoft.com>
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/themes/mdk-check_on.png, share/step-green-click.xpm,
- share/step-green.xpm, share/step-red-click.xpm,
- share/themes/mdk-check_off.png: new gfx
-
- * standalone/drakbackup, network/network.pm: bug correction
-
-2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/12 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
- * docs/README.pxe: cleanup the .cfg
-
- * share/rpmsrate:
- - move bootsplash from SYSTEM to X
- - lower Aurora
-
-2002/02/12 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed:
- - Endless loop when entering printerdrake during installation in
- recommended
- mode without local printer
- - Printerdrake was not closed when one was in the "Add Printer"
- sequence
- during installation and one clicked another installation item (entries
- on left hand side)
- - When configuring printing only after installation Printerdrake tried
- to
- check the installed queues without Foomatic being installed (bug was
- already in 8.1, but noone discovered it).
- - CUPS died when one tried to add a (local) printer in recommended
- mode
- after installation.
- - Improved text for the dialog telling that no local printer was
- detected.
- - The list of auto-detected printers appeared as drop-down menu and
- not as
- a list.
-
- * detect_devices.pm: In the USB auto-detection checked whether and where
- the device node was
- created.
- Fixes on device auto-detection:
- - Made USB printer auto-detection routine in "detect_devices.pm"
- creating
- the appropriate device nodes (needed for USB printers being recognized
- during installation).
- - Fixed "devices.pm" to be able to handle device files with numbers
- geater
- than 9 (ex: /dev/usb/lp10).
-
- * standalone/printerdrake:
- - Assure that Foomatic is installed before checking existing printer
- queues.
-
- * devices.pm: Fixes on device auto-detection:
- - Made USB printer auto-detection routine in "detect_devices.pm"
- creating
- the appropriate device nodes (needed for USB printers being recognized
- during installation).
- - Fixed "devices.pm" to be able to handle device files with numbers
- geater
- than 9 (ex: /dev/usb/lp10).
-
- * printer.pm: Added forgotten '$prefix'es.
- Fixed:
- - Endless loop when entering printerdrake during installation in
- recommended
- mode without local printer
- - Printerdrake was not closed when one was in the "Add Printer"
- sequence
- during installation and one clicked another installation item (entries
- on left hand side)
- - When configuring printing only after installation Printerdrake tried
- to
- check the installed queues without Foomatic being installed (bug was
- already in 8.1, but noone discovered it).
- - CUPS died when one tried to add a (local) printer in recommended
- mode
- after installation.
- - Improved text for the dialog telling that no local printer was
- detected.
- - The list of auto-detected printers appeared as drop-down menu and
- not as
- a list.
-
-2002/02/11 dam's <damien@mandrakesoft.com>
-
- * share/list: added modinfo
-
- * network/netconnect.pm: added cancel for first step
-
-2002/02/11 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: fixed syntax error...
-
- * Xconfigurator.pm: avoid testing fbdev driver.
-
- * install_steps.pm: added Aurora or bootsplash for getting a need on frame
- buffer.
- added fbdev for GeForce Integrated.
-
-2002/02/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
- Hungarian and Vietnamese files
-
-2002/02/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
- fb". Keeping my solution ;p
-
- * c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
- is undefined
-
- * any.pm: allow to edit the initrd field (thx to randy.k.wilson)
-
- * install_any.pm (@needToCopy): add "ntp"
-
-2002/02/11 warly
-
- * share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
- are no more needs to have ppp in the INSTALL section, as the darkness is
- going away...
-
-2002/02/10 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
- expert
- questions directly (it would need a semi_auto asking on which drive the
- bios
- boots...)
-
-2002/02/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2002/02/09 daouda
-
- * share/rpmsrate:
- - add rfbdrake to NETWORKING_REMOTE_ACCESS and
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help.pm file
-
- * share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
- share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
- share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
- with the manual help
-
-2002/02/09 warly
-
- * share/rpmsrate: add ppp in INSTALL
- add dev in INSTALL
-
-2002/02/08 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
- pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx
-
- * network/network.pm: corrected wireless modules
-
-2002/02/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
- various languages
-
-2002/02/08 Pixel <pixel@mandrakesoft.com>
-
- * docs/SHORTCUTS: add F1 & F2
-
-2002/02/08 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added instructions for scanning on HP's MF devices to
- the printer help page.
- HP PhotoSmart printers do not scan, so do not show how to scan with
- them.
- Do not let dialogs of network configuration correction appear embedded
- in the "Add printer" wizard.
- Completed wizard mode for adding a printer in both recommended and
- expert mode.
-
- * printer.pm: Enabled transferring queues of HP multi-function devices
- between spoolers.
- CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
- Completed wizard mode for adding a printer in both recommended and
- expert mode.
-
-2002/02/08 warly
-
- * share/rpmsrate: add bootsplash in system 4
-
-2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm: fix error causing a bad window sizing when there is
- a horiz scroll
-
-2002/02/07 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: fixed shadow when testing X
-
-2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/help_xml2pm.pl: fixed email address
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm:
- - don't pop the "do you want to install samba?"
- - rwindow is not a window when embedded, so set_default_size only if
- possible
-
- * my_gtk.pm: make perl_checker happy
- ensure no more than one child is in the Plug
-
- * interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
- * interactive_gtk.pm: fix error causing a bad window sizing when there is
- a horiz scroll
- (exit): ensure USR1 is sent to mcc
-
- * Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
- choosing monitor "Custom"
-
- * install2.pm, install_steps.pm: create and use miscellaneousAfter (so
- that SECURE_LEVEL is set *after* asking)
-
- * diskdrake/interactive.pm (Options): wrap the help text
-
- * standalone/diskdrake: handle --embedded xxx xxx
-
-2002/02/07 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)
-
- * standalone/localedrake: fix pixel stuff: don't restart wm on cancel
-
-2002/02/07 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: beta 2
-
- * printerdrake.pm: corrected wizard pb
-
- * my_gtk.pm: wizard fixes
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): precise the type when mounting in standalone (for smb,
- nfs would not need it)
-
- * diskdrake/smbnfs_gtk.pm:
- - don't pop the "do you want to install samba?"
- - rwindow is not a window when embedded, so set_default_size only if
- possible
-
- * interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
- * my_gtk.pm: ensure no more than one child is in the Plug
-
- * standalone/diskdrake: handle --embedded xxx xxx
-
- * interactive_gtk.pm (exit): ensure USR1 is sent to mcc
-
-2002/02/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: removed ugly pink and ugly left bar for wizard mode
-
-2002/02/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
- to hardware or options.
-
-2002/02/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: have frozen-bubble in GAMES at level 4
-
-2002/02/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file
-
-2002/02/06 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Automatic configuration of the scanning part of HP's
- multi-function devices.
-
- * printerdrake.pm: Added some stuff for the Wizard mode.
- Automatic configuration of the scanning part of HP's multi-function
- devices.
- Updated automatic package installation in printerdrake, no "kups" and
- "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
- "rpmsrate" and "rpmsrate.server" appropriately.
-
- * share/rpmsrate.server, share/rpmsrate: Added scanning packages to
- INSTALL section, for HP MF device installation by printerdrake.
- Updated automatic package installation in printerdrake, no "kups" and
- "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
- "rpmsrate" and "rpmsrate.server" appropriately.
-
-2002/02/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
- HP's multi-function devices.
-
-2002/02/05 dam's <damien@mandrakesoft.com>
-
- * standalone/logdrake: wizard updated
- correction for mcc.
-
-2002/02/05 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate.server: synced with normal rpmsrate for Basque
- management.
-
- * install2.pm: auto_allocate for oem mode is not needed as oem script
- create all necessary partition.
-
- * install_any.pm: add support for Basque (no KDE).
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.
-
- * share/rpmsrate: add support for Basque (no netscape in such case)
-
- * rescue/tree/etc/oem: select preferred kernel as kernel-\d.
-
- * install_steps.pm: fixed logic, when someone want /root/drakx,
- it has to check /root/drakx and not /root only.
-
-2002/02/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
- and it taints the kernel (pabo)
-
- * rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
- in /mnt
- can really be used
-
-2002/02/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
- * Xconfigurator.pm: testFinalConfig now always returns true if test is
- skipped because of a bad_card (back to the old behaviour, this was no
- good (the aim is to enable changing the monitor when test is skipped))
-
- * share/po/fr.po: fix "Details" translated in "Détails de la partition"
- but is used at different
- place where the meaning has nothing to do with "partitions"
-
-2002/02/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
- HP's multi-function devices.
-
-2002/02/05 warly
-
- * share/compssUsers.server: remove non server group from rpmsrate.server
- add utilities group in compssUser.server
- (webmin,ssh-server,wizards,monitoring)
-
- * share/rpmsrate.server: begin rpmsrate.server cleaning
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
- * Xconfigurator.pm: testFinalConfig now always returns true if test is
- skipped because of a bad_card (back to the old behaviour, this was no
- good (the aim is to enable changing the monitor when test is skipped))
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: log the "chkconfig --del gpm" when there is a serial
- mouse
-
-2002/02/04 dam's <damien@mandrakesoft.com>
-
- * standalone/logdrake: corrected typo. Yvounet, check your code!!
- embedded, explain
-
- * my_gtk.pm: bug correction
-
- * standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
- guy english review
-
-2002/02/04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added v4l module all the time (along with dbe already
- present).
-
-2002/02/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: have numlock activated when isLaptop rather than
- $o->{pcmcia}
-
-2002/02/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
- share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
- share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
- share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
- share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
- share/po/sv.po, share/po/zh_TW.po: updated some po files
-
-2002/02/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix creating /etc/security/msec/server
-
- * share/po/fr.po: fix "More" translation
-
-2002/02/04 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Made HP multi-function devices configured
- with HPOJ being displayed correctly by printerdrake.
-
- * detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
- detected on a parallel port.
-
-2002/02/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update french translations
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: force a few more "list"s instead of "combo" boxes
- since "format" is now handled for combo boxes, combo boxes are used in
- much too many places. Fix this by forcing type "list" for some cases,
- and using type "list" when a ask_from has only one entry
-
- * interactive.pm: since "format" is now handled for combo boxes, combo
- boxes are used in much too many places. Fix this by forcing type "list"
- for some cases, and using type "list" when a ask_from has only one entry
-
- * bootloader.pm:
- - fix some vga text modes 80x30
- - chmod 600 lilo.conf when a password is given
- - fix general "append"
- (thanks to David Eastcott)
- "password" works without "restricted", not the other way round (reported
- by David Eastcott)
- fix typo
-
-2002/02/03 warly
-
- * share/rpmsrate.server: synchronize with current cooker rpmsrate
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: force a few more "list"s instead of "combo" boxes
- since "format" is now handled for combo boxes, combo boxes are used in
- much too many places. Fix this by forcing type "list" for some cases,
- and using type "list" when a ask_from has only one entry
-
- * interactive.pm: since "format" is now handled for combo boxes, combo
- boxes are used in much too many places. Fix this by forcing type "list"
- for some cases, and using type "list" when a ask_from has only one entry
-
- * bootloader.pm: fix typo
- help lilo when there is hdd with no hdc drive (needs testing!)
-
-2002/02/03 warly
-
- * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
- compssUsers.server
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: help lilo when there is hdd with no hdc drive (needs
- testing!)
-
-2002/02/03 warly
-
- * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
- compssUsers.server
-
-2002/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: XFree is now 4.2
-
- * standalone/fileshareset: fix dropping samba sections which don't have
- any "path="
-
-2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/DrakX.pot: updated Swedish file
-
- * share/po/fr.po: merged again French file to recover some lost strings;
- and added non breakable spaces at all the needed places as required
- by French typography
-
-2002/02/01 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm: please perl_checker
-
- * install_interactive.pm: use from_Mb for choosing the size of the windows
- partition
-
- * install_steps.pm: create symlink /etc/security/msec/server in security >
- 3
-
-2002/02/01 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: First steps of the implementation for the "Add printer"
- wizard.
-
- * detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
- USB
- General improvements for reliability of USB printer auto-detection
-
-2002/02/01 yduret
-
- * pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
- jeune and boulet)
- rm for readding with -kb option (i am jeune and boulet)
-
- * standalone/logdrake: ergo fix thx dadou report
- fix --explain=foo bug that prevent to show anything
-
- * bootlook.pm: ergo fix thx dadou report...
-
-2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm, standalone/drakbackup, printerdrake.pm,
- standalone/logdrake: changed some strings to make translation easier
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/01 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm: please perl_checker
-
- * install_interactive.pm: use from_Mb for choosing the size of the windows
- partition
-
- * Xconfigurator.pm: testFinalConfig now returns false if test is skipped
- because of a bad_card or
- verybad_card and $skip_badcard is not set
-
-2002/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
- keyboard choices (KDE is translated to Tamil)
-
-2002/01/31 yduret
-
- * pixmaps/wiz_scannerdrake.png: on rajoute la zolie image
-
-2002/01/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard
-
- * keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
- keyboard
-
- * lang.pm: Enabled "ms" language in the language selection list (there are
- Gnome and KDE
- translations for it)
-
- * share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
- share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
- share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
- updated some po files
-
-2002/01/30 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add gnome-core in GNOME (used to be required?)
-
- * Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
- running_window_manager" and "ask_window_manager_to_logout" to any.pm
-
- * any.pm (ask_window_manager_to_logout, running_window_manager): created
- from Xconfigurator and cleaned
- (selectLanguage): if $langs is empty, don't ask for "other languages"
-
- * pixmaps/wiz_printerdrake.png: re-adding with -kb
- removing for re-adding with -kb
-
- * standalone/localedrake: now works in normal user: it modifies the
- ~/.i18n (todo: handle kde crazy variables?)
-
- * lang.pm: handle read'ing and write'ing to a specified file (useful
- example: ~/.i18n)
-
-2002/01/30 sdupont
-
- * standalone/drakbackup: complex merging....
- change /var/drakbackup to /var/lib/drakbackup
- crontab update
- mail report update
- sendmail update
- require rpm mode
- code optimisation
- remove about gi
- new help function
-
-2002/01/29 Till Kamppeter <till@mandrakesoft.com>
-
- * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
- printerdrake.
-
- * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
- wizard.
- Improvements for the selection of a local printer, especially when no or
- one printer was detected.
-
-2002/01/29 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: icons placements are better
-
-2002/01/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakbug_report, standalone/drakautoinst, install2.pm,
- install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
- /root/* files (ddebug.log, install.log, report.bug,
- auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
- and also save stage1.log there
-
- * partition_table_raw.pm: add new pixel-made grub signature
-
- * crypto.pm: update land2tzs accordingly to new url2land
- Add url2land entries for nl, it, at
-
- * any.pm: move /root/* files (ddebug.log, install.log, report.bug,
- auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
- and also save stage1.log there
- rephrase a little bit highest level
- to not refer to "level 4" anymore
- use formatAlaTeX for describing security levels
-
- * install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk
-
-2002/01/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
- share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
- share/po/es.po: updated pot file with help messages from manual
-
-2002/01/29 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: handle "format" for combo's
-
- * bootloader.pm: use the new format for combo's to clean code handling
- {vga} field
-
- * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
- * any.pm: use the new format for combo's to clean code handling {vga}
- field
- handle the case where samba and/or nfs-utils are not installed
-
- * install_steps.pm: move the various bootloader::add_append's in
- setupBootloaderBefore
-
- * diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
- are not installed
-
- * install_steps_interactive.pm: visually unselect X and docs when minimal
- install
- "With X" choice is now working
- handle "Cancel" on language selection
-
-2002/01/29 Till Kamppeter <till@mandrakesoft.com>
-
- * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
- printerdrake.
-
- * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
- wizard.
- Improvements for the selection of a local printer, especially when no or
- one printer was detected.
-
-2002/01/29 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * interactive.pm: fix pixel's minimal example using interactive.
-
-2002/01/29 yduret
-
- * docs/interactive/ask_from_list, docs/interactive/wait_message,
- docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
- docs/interactive/ask_from: added some snipet coe for example
-
- * standalone/logdrake: logdrake is now under gi/perl-install/standalone
-
-2002/01/29 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
- * install_steps.pm: move the various bootloader::add_append's in
- setupBootloaderBefore
-
-2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: do the few new translations
-
- * standalone.pm: try to reflect hierarchy for */*.pm
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
- printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
- share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
- standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
- share/po/id.po: Corrected various English typos
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo
-
- * partition_table.pm: warn if partitions have been renumbered due to a
- partition being added or removed
-
- * diskdrake/interactive.pm: don't warn_if_renumbered during install
- warn if partitions have been renumbered due to a partition being added
- or removed
-
-2002/01/28 siegel
-
- * share/po/de.po: new german version
-
-2002/01/28 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
- exactly until CUPS is ready.
- CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
- is not "known" to it.
-
- * printer.pm: Removed debug helper line.
- Replaced "sleep" commands by a subroutine which waits exactly until CUPS
- is ready.
- CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
- is not "known" to it.
-
-2002/01/28 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/br.po: update brezhoneg translations
-
- * share/po/fr.po: more french translations
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
- printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
- share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
- standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
- share/po/id.po: Corrected various English typos
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo
-
- * diskdrake/interactive.pm, partition_table.pm: warn if partitions have
- been renumbered due to a partition being added or removed
-
-2002/01/28 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm, network/netconnect.pm: debug network testing
-
-2002/01/28 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
- scroll bar and reduced its size.
-
- * bootloader.pm: fixed get_append if key=mem.
- timeout passed to 10 instead of 5.
-
-2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: update games rates
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
- can't fail
-
- * any.pm: simpler&nicer solution for writing kppprc in utf8
- have kppprc strings in utf8
-
- * detect_devices.pm: remove test code
-
- * install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
- handling nicely the mem=nopentium case)
-
- * diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
- is usually very short), use a waiting cursor instead.
- (the wait_message's were causing bad interactivity stuff)
-
-2002/01/27 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: add a minimal example
-
- * services.pm:
- - move the require on my_gtk to ask_standalone_gtk
- - cleanup
-
- * Makefile.config:
- - adapt to new diskdrake modules
- - add logdrake to STANDALONEPMS_
-
- * my_gtk.pm: strange protection against ensure_focus generating a "focus"
- event causing a
- dead-loop (reminder: ensure_focus helps ensuring a widget is focused)
-
- * Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
- install_interactive.pm, diskdrake.pm:
- - adapt to new diskdrake modules
- - some cleanup in drakxtools build
-
- * diskdrake/removable.pm: remove debugging code
- new diskdrake modules (diskdrake_interactive is now
- diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
- created from diskdrake.pm)
-
- * diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
- diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
- is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
- others created from diskdrake.pm)
-
- * diskdrake/smbnfs_gtk.pm: fix updating the actions
- new diskdrake modules (diskdrake_interactive is now
- diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
- created from diskdrake.pm)
-
- * network/nfs.pm: find_exports: add a timeout
-
- * fs.pm: new function fstab_to_string
-
- * standalone/diskdrake: handle --removable *and* --removable=<dev>
- handle --removable=<dev>
- - new options --hd, --nfs, --smb, --removable
- - adapt to new diskdrake modules
- - save $all_hds->{current_fstab} to know if /etc/fstab must be saved
-
-2002/01/25 fabman
-
- * share/po/es.po: updated spanish translation
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add devfsd
-
- * install_any.pm: remove_advertising: use rm_rf since we don't have the
- real list of files (the .pl's are not in @advertising_images)
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Less important options only shown when
- "Advanced" button clicked.
- Handling of cursor position in the main window improved.
- Handling of empty printer queue list in main window improved.
- Removed line breaks from longer texts, so that text flows into window
- nicely
- Minor text improvements.
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * install_any.pm: advertising engine updated
-
- * share/logo-mandrake.png: beta logo
-
- * install_steps_gtk.pm: corrected decy
- advertising engine updated
-
-2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: please find a better fix
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
- linux
- fix spelling
-
- * Makefile: call clean-rpmsrate
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm, install_any.pm: advertising engine updated
-
- * share/po/fr.po: typo
-
- * share/logo-mandrake.png: beta logo
-
-2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: please find a better fix
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/Makefile: ensure errors propagate
-
- * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
- linux
- fix spelling
-
- * Makefile: call clean-rpmsrate
-
- * mdk-stage1/pci-resource/Makefile: silly shell
- ensure errors propagate
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po: typo
- corrected too long label Mise à niveau deas paquetages seule. please
- find a better FIX
-
-2002/01/25 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: cosmetic changes.
-
- * pkgs.pm: fixed try opening to trigger changeCD callback.
-
-2002/01/24 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate:
- - add msec in any install
- - use BIGMEM flag for kernel-enterprise
- - use SMP flag for kernel-smp
- (those 2 goes together with Warly's clean-rpmsrate)
- add flag DOCS which should work together with !excludedocs
-
- * any.pm: ensure grub is installed if grub is chosen
-
- * install_any.pm:
- - add DOCS (based on !excludedocs)
- - set BIGMEM and SMP flags
- (since kernel-smp and kernel-enterprise sub-numbers are better handled
- by
- rpmsrate together with Warly's clean-rpmsrate)
-
- * install_steps_interactive.pm, install2.pm: minimal install now handles
- excludedocs
-
- * install_steps.pm: log excludedocs
- minimal install now handles excludedocs
- put devfs=mount only if devfsd is installed
-
- * diskdrake_interactive.pm: truncate lvm name to 63 characters since
- longer vg names are not allowed
-
-2002/01/24 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
- entry appearing after adding a new printer.
- Modified "Local Printer" dialog to be more newbie-friendly.
-
-2002/01/23 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: updated speedtouch code to use pppoa3
-
- * my_gtk.pm: removed font loading
-
-2002/01/23 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
- mem=nopentium).
-
- * install_steps.pm: restored mem=nopentium.
- removed mem=nopentium.
-
-2002/01/23 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: name mangling max length set to 12
- use name mangling for samba labels
-
-2002/01/23 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: New user interface in main window
- More printer info in printer modification window
- Better support for remote CUPS printers
-
-2002/01/22 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: improved widget_icons
-
- * install_steps.pm: added net_cnx_pg output when configuring network in
- auto install
-
-2002/01/22 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added support to save already existing synthesis file.
-
- * install_any.pm: changed code to build synthesis file, check if they have
- not already been copied
- from mirror, or build them using parsehdlist.
-
-2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: Translate a few things more
-
-2002/01/22 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
- defaults to ext3 instead of ext2
-
- * interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
- (request from till)
- add feature "allow_empty_list" for "list" entries (disables the special
- cases for 0 and 1 element lists)
-
- * install_any.pm, diskdrake.pm: cleanup error messages (and fix
- diskdrake's)
-
- * install_interactive.pm, raid.pm: defaults to ext3 instead of ext2
-
- * partition_table.pm: remove unused auto_win_extended stuff
- handle extended partitions with no partitions inside (esp. for the first
- hda5 & windows XP)
-
- * bootloader.pm:
- - fix default not being formatted like labels for lilo
- - check the label is not already used *case-sensitively*
- - check a kernel_or_dev is given
-
- * any.pm:
- - remove the default entry when that entry is removed
- - use allow_empty_list for displaying the entries
- - fix default not being formatted like labels for lilo
- - check the label is not already used *case-sensitively*
- - check a kernel_or_dev is given
-
- * fsedit.pm: yet again better error reporting
- defaults to ext3 instead of ext2
-
- * standalone/drakboot, bootlook.pm: fix yves's code duplication of
- lilo_choice (use $::lilo_choice in bootlook)
-
- * interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
- (request from till)
-
- * install_steps_interactive.pm: cleanup error messages (and fix
- diskdrake's)
- better messages for the minimal installs
-
- * standalone/diskdrake: yet again better error reporting
- cleanup error messages (and fix diskdrake's)
-
- * share/rpmsrate: move mandrake-mime from SYSTEM to X
- lower sndconfig
-
-2002/01/22 fcrozat
-
- * share/rpmsrate: Really install gnome control center when installing
- GNOME
-
-2002/01/22 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: added mem=nopentium for any Athlon or Duron processor.
-
-2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Makefile: exclude standalone from testing
-
- * share/po/fr.po: resolve small conflict
-
-2002/01/22 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: add the new "mii" module to 'net_raw'
-
- * install_steps_interactive.pm: better messages for the minimal installs
- fix a few cancel's (reported by slegros)
- don't ask security level in non-expert
-
- * install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
- (reported by slegros)
-
- * share/rpmsrate: move mandrake-mime from SYSTEM to X
- lower sndconfig
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
- * install_steps_interactive.pm, install2.pm: can't call
- any::config_libsafe so early during install, move it where msec is
- called
-
- * any.pm: quiet perl's warning
-
-2002/01/21 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm: fixed network conf in auto install
- corrected network down
-
- * my_gtk.pm: removed debug print
- icons widget improvment : icon placment, highlighting
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: increase the size of the "Choose action" box
-
- * diskdrake_interactive.pm: remove the "Active" partition feature
-
- * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
- * install2.pm: can't call any::config_libsafe so early during install,
- move it where msec is called
-
- * install_steps_interactive.pm: can't call any::config_libsafe so early
- during install, move it where msec is called
- cleanup, update, enhance security level choice
-
- * standalone/draksec: cleanup, update, enhance security level choice
-
- * install_steps.pm: remove deprecated msec groups adding
- cleanup
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub
-
- * any.pm: quiet perl's warning
- cleanup, update, enhance security level choice
- when creating users, add handling of xgrp/rpm/adm/wheel groups in high
- security
- fix advice about "usermod -G"
-
- * tools/i386/netboot/menu.lst.example: add gateway parameter
-
-2002/01/21 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new ugly icon
-
- * install_steps.pm: corrected network down
-
-2002/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: add helvR12_iso15
-
- * install_steps_interactive.pm: """ When I choose a / partition smaller
- than 200 MB, the installation
- gives me an error message complaining that my system does not
- have enough free space for the installation, although basesystem
- install
- require less than 100 MB. """
- up to around 250MB, minimal install is chosen.
- questions are: base system only, or no X, or normal.
-
-2002/01/21 siegel
-
- * share/po/de.po: updates
-
- * standalone/drakbackup: fixed i18n bugs
-
-2002/01/20 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: call msec with run_commands=0 to fix the network reloading
- (causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakbackup: sorry, _("$_") is not allowed
-
-2002/01/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
- '\n'"
-
- * install2.pm: call msec with run_commands=0 to fix the network reloading
- (causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20 yduret
-
- * timezone.pm: added Italy (time.ien.it) in
-
-2002/01/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * standalone/drakbackup: Rework English syntax in drakbackup - hopefully
- I've got the intent correct ;^)
-
-2002/01/19 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm: Replaced USB printer auto-detection by a more
- reliable method.
-
-2002/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: changed Update -> Upgrade for installation
- class.
-
-2002/01/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/draknet:
- - move 'use standalone' up to comply to 'explanations'
- - fix an english typo, s/connexion/connection/
-
- * standalone/drakgw:
- - move 'use standalone' up to comply to 'explanations'
- - write higher-level 'explanations'
- - small fix, s/`ls ..`/glob(..)/
-
- * standalone/scannerdrake:
- - move 'use standalone' up to comply to 'explanations'
- - fix a small english problem
-
- * share/po/fr.po: reduce a lot of fuzzy and untranslations
- large stuff from printerdrake, drakbackup and drakfont still to do :-)
-
- * c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
- standalone/drakautoinst, standalone/keyboarddrake,
- standalone/localedrake, standalone/livedrake, standalone/drakboot,
- standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
- standalone/drakxservices, standalone.pm, standalone/drakproxy,
- standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
- standalone/drakxconf, log.pm, standalone/logdrake,
- standalone/drakbackup, standalone/drakfont:
- - write the 'common' part of the 'explanations' stuff,
- with nice help from Pixel for the tough Perl part
- - move 'use standalone' up in all standalone apps,
- to comply to 'explanations'
-
-2002/01/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2,
- share/fonts.tar.bz2: changes to get in line with new XFree86
-
-2002/01/18 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
- locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: add update flag for urpmi medium.
-
- * install_steps_interactive.pm: even if user cancel update of package on
- tree, allow urpmi to install the medium.
- avoid downNetwork as no difference are made between ethernet or ppp.
- fixed typo.
- allow cancel when installUpdates.
-
- * crypto.pm: add update medium for crypto for urpmi (flag update).
- fixed typo.
- allow selection/deselection of update medium (for cancel of
- installation).
-
- * install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
- specific medium has been given.
-
-2002/01/18 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
- locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18 sdupont
-
- * standalone/drakfont: update warning messages (qa).
-
- * standalone/drakbackup: fix traduction problems and more ...
-
-2002/01/17 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm, diskdrake_interactive.pm: better error message when auto
- allocate doesn't do anything
-
-2002/01/17 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm, network/netconnect.pm: draknet : success message only
- if success
-
- * my_gtk.pm: added timeout for redrawing icon widget
-
-2002/01/17 fcrozat
-
- * share/rpmsrate: kdebase-nsplugins will be installed by default when
- selecting KDE
-
-2002/01/17 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid upgrading a package by selection on files unless it has
- been obsoleted.
-
-2002/01/17 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
- and "/usr")
-
- * fsedit.pm, diskdrake_interactive.pm: better error message when auto
- allocate doesn't do anything
- check the mountpoint is valid for encrypting (disallow "/" and "/usr")
-
- * fs.pm: do not create /swap
-
- * services.pm: move service apcupsd from Printing to System
-
- * bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
- ide is present)
-
-2002/01/17 sdupont
-
- * standalone/drakbackup: stable version for qa pkg.
- (without unstables options)
-
-2002/01/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix cancel on scsi module loading
-
-2002/01/16 sdupont
-
- * standalone/drakbackup: update send mail.
- (pixel mode. ;))
-
-2002/01/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: installUpdates: use formatAlaTeX
-
-2002/01/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix cancel on scsi module loading
-
- * install_steps_interactive.pm: don't drop default_packages in "Base
- system only"
-
- * standalone/fileshareset: add locking to ensure things are in a proper
- state
-
-2002/01/15 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: advertising engine amelioration
-
- * my_gtk.pm: automatic icon placement in icon_labels_widget
-
-2002/01/15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: remove the test trick
- encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
- diskdrake.pm: encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
-2002/01/15 dam's <damien@mandrakesoft.com>
-
- * network/isdn_consts.pm: updated
-
-2002/01/15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: remove the test trick
- encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
- diskdrake.pm: encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * any.pm: have ddcxinfos take the best result of every run
-
-2002/01/15 sdupont
-
- * standalone/drakfont: fix progress bar problem.
- some gi updates:
- - windows font importation.
- - advanced font importation.
- - licence interface.
- - ...
-
- * standalone/drakbackup: new ./drakbackup --show-conf
- fix daemon problem (media to use).
- update informations on drakbackup report mail.
- __ 3290 lines.
- man pages fr created.
- some code cleaning on backend mode. (all_user_list && return_path)
- new functions on backend mode:
- - show-conf
- - debug
- - help
- - version.
-
-2002/01/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - eata is SCSI adapter, not 'disk' adapter
- - have eata module in boot floppies
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
- pci ids
-
- * share/rpmsrate: have lbreakout weigthed 4 instead of 2
-
- * mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
- (sugg David Faure
- and Pixel)
-
-2002/01/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo (making auto installs working again)
-
-2002/01/13 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: s/lbreakout/lbreakout2/
-
- * install_steps_interactive.pm: cleanup
-
-2002/01/13 sdupont
-
- * standalone/drakbackup: some updates ...
- in "more option" steps user could choose to receive a report by mail for
- each backups.
- ftp backup work.
- fix time problems.
- remove doc from file.
- security fix for configuration file.
-
-2002/01/11 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: advertising engine works !
- champagne.
- still some display bugs, but they will be corrected later.
- need new ads and adequat description file
- new advertising engine
-
- * install_any.pm: modifications for new avertising engine
-
- * my_gtk.pm: new icons placement
-
-2002/01/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
- share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
- share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
- share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
- share/po/it.po: updated Spanish file; merged help-* files
-
-2002/01/11 sdupont
-
- * standalone/drakbackup: update header pixmaps.
- correction of message problem.
-
- * pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
- pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.
-
- * standalone/drakfont: update header pixmaps.
-
-2002/01/10 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: domainname corection
-
- * network/network.pm: domainname corection
- corrected network domainname pb
-
- * install2.pm: corrected read_resolv => read_conf
-
-2002/01/10 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: english taste inspired by daminette.
-
-2002/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/lsparts: better looking output of type of partition (%x => %0x)
-
-2002/01/09 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, standalone/net_monitor, standalone/draknet,
- network/network.pm, network/modem.pm, network/netconnect.pm: big merge
- from update 8.1 with cvs
- First part. Part 2 following
-
- * my_gtk.pm: added bold option in text creation. Some corrections
-
- * install_steps_interactive.pm: corrected fpons typo
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
- fixed stupid.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/08 dam's <damien@mandrakesoft.com>
-
- * install2.pm: cosmetik
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: added eval around pixmap drawing for advertising.
-
-2002/01/08 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakbackup: another round of bad use of _() fixes.
- fixed bad use of _().
-
-2002/01/08 sdupont
-
- * standalone/drakbackup: drakbackup work ...
- incremental backup and restore work.
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
- * standalone/drakautoinst: removed stupid invocation of _("$_"), is it
- correct code to change it to $_ only ?
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
- * standalone/drakautoinst: removed stupid invocation of _("$_"), is it
- correct code to change it to $_ only ?
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
-2002/01/07 dam's <damien@mandrakesoft.com>
-
- * Makefile: socmetic
- typo
- added debug mode for the whole install
-
- * my_gtk.pm: removed print
- new pack_start functions, powerpack sub added (code from adrien)
- incorporated adrien's code to generalize pack functions
- minor bug fixes
-
- * install_steps.pm, network/netconnect.pm: corrected network connection
- during install
-
- * install2: added debug mode for the whole install
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
- * Makefile: fixed overwriting of install2 filtering, keep diagnostic and
- strict for debug mode.
-
-2002/01/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: also log server name for HTTP install
-
-2002/01/04 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
- network/netconnect.pm: corrected minor bugs in network (among others bug
- "modifying read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
-
-2002/01/04 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected minor bugs in network (among others bug "modifying
- read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
- corrected font display : no useless font->height, but ascent + descent
- updated
-
- * network/isdn_consts.pm: changed asus isdn hisax identify
-
- * network/adsl.pm, install_steps.pm, network/tools.pm,
- network/netconnect.pm: corrected minor bugs in network (among others bug
- "modifying read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
-
-2002/01/04 François Pons <fpons@mandrakesoft.com>
-
- * http.pm, install2.pm, steps.pm, install_any.pm: added update
- installation support to install (big modifs need testing).
-
- * pkgs.pm: allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * crypto.pm: removed test code.
- allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * install_steps_interactive.pm: removed obsoleted comment.
- allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * install_steps_gtk.pm: fixed empty flat package selection when giving a
- limit to medium.
- added update installation support to install (big modifs need testing).
-
- * install_steps.pm: allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- fix for auto updates.
- added update installation support to install (big modifs need testing).
-
-2002/01/04 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: enable easy patch-adding of pcitable and usbtable
- entries
-
-2002/01/03 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: user can be equal to 500
-
-2002/01/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated code to create synthesis file (including
- provides on files).
-
-2002/01/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ar.po: updated Arabic file
-
-2002/01/03 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, Xconfig.pm: save the output of ddcxinfos before
- modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
- modprobe'd, ddc probe doesn't work anymore)
-
- * install_steps_interactive.pm, install_steps_gtk.pm: fix english messages
-
- * share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo
-
- * pkgs.pm: prefer gcc-cpp
-
- * interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button
-
- * any.pm: fix english messages
- save the output of ddcxinfos before modprobe'ing i810fb, and use that
- output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
- anymore)
-
-2002/01/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: changed @euro locales to plain names; now old currencies ones
- are obsolete
-
-2001/12/31 sdupont
-
- * standalone/drakfont: new fixed size and add a head pixmap (to update).
-
- * standalone/drakbackup: lots of update ...
- - cron work.
- - backup incremental & normal work.
- - corrupted backup data files supported.
- - error messages updated.
- - aff list of backup data files pbs.
- - test all backup files before to restore it.
-
-2001/12/30 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
- root reserved part is 0% (and not 5%)
-
-2001/12/30 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
- root reserved part is 0% (and not 5%)
-
-2001/12/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
- call setup_thiskind with
- at_least_one=1 (so that pci_class probe is used and so unknown
- serial_usb
- recognised (cf ldetect))
-
- * modules.pm (load_thiskind): allow $probe_type to be given, allowing
- forced pci probe (unsafe)
-
- * any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
- forcing
- pci_class probe when no modules is found.
-
-2001/12/28 sdupont
-
- * standalone/drakbackup: update select data on backup cd
-
-2001/12/27 sdupont
-
- * standalone/drakbackup: fix of user selection during restore step.
- remove return_file_date.
- change algo for incremental backup.
-
-2001/12/26 sdupont
-
- * standalone/drakbackup: some gi corrections & update.
- incremental restore.
-
-2001/12/22 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
- only used during install
-
- * my_gtk.pm: export gtkcolor (used in install_steps_gtk)
- make perl_checker happy
-
-2001/12/22 sdupont
-
- * pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
- pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
- pixmaps/backup_hd.png, pixmaps/backup_title.png,
- pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
- pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
- drakbackup pixmaps files.
-
- * pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
- pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
- pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
- pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
- pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
- pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
- pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
- pixmaps/ic82-back-up-48.png: drakbackup designer icons.
-
- * standalone/drakbackup: add pixmaps on backup step.
- new designer pixmaps on drakbackup.
-
-2001/12/21 sdupont
-
- * standalone/drakbackup: some update in file name parsing...
- etc ...
-
- * pixmaps/BDO-drakebackup1.png: drakbackup
-
-2001/12/20 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: API changed, so call changed
-
- * share/logo-mandrake.png: new ayo logo
-
-2001/12/20 sdupont
-
- * standalone/drakbackup: update the todo header
- the REQUIRE header
- & code cleaning
- - tar -cvf tarfilename --after-date="sept 1, 2000" /home
- l.380 incremental: date -> if already exist do find -m ... | tar ...
- non incremental: date + delete old before the backup
- - correct detection of backups during restore.
- - gi for other media during restore. hd-> ok
- - backend for build backup update and support
- incremental backups.
- - real incremental backup
- update resore & help.
-
-2001/12/19 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: update graphical backend
-
-2001/12/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add dl2k.o (nic module) per request of nplanel
-
-2001/12/19 sdupont
-
- * standalone/drakbackup:
- - gi for other media during restore. hd-> ok
- - backend for build backup update and support
- incremental backups.
- - real incremental backup
- add other media source during restore.
- - update help & license.
- - code cleaning.
- - ask during whqt sys step if user want to backup critical
- files, like /etc/passwd /etc/group /etc/fstab
- - use preserve permissions during tar
- - begin of total backup step.( all partitions wanted, windows
- partitions for example!)
- - remove replace mode (backup_*_version is enought)
-
-2001/12/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
- untested).
-
-2001/12/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix typos
-
-2001/12/18 sdupont
-
- * standalone/drakfont: include new pixmap on main menu.
-
- * standalone/drakbackup: sort lists in all lists selection.
- correct use of incremental backup
- parse of restore & system state.
- fix restore user selection problems
- fix build backup data selection problems
- ect ...
- drakbackup -> drakxtools.rpm
-
- * pixmaps/ic-drakfont-48.png: drakfont pixmap...
-
-2001/12/18 yduret
-
- * standalone/logdrake: fix console mode : exit now
-
-2001/12/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix typos
-
-2001/12/17 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: power graphical backend update : text is now
- centered
-
- * my_gtk.pm: power graphical backend update : text is now centered
- updated new graphical backend
-
-2001/12/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm, standalone/drakgw: drakgw for gold
-
- * tools/pcmcia_config.patch: remove permanently (using
- patch_pcmcia_config.pl now)
-
-2001/12/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
- tmpfs
-
-2001/12/17 sdupont
-
- * standalone/drakbackup:
- ________________________________________________________________
- DONE:
- incremental backups have depends whith replace options.
- gtklist not maximized.
- restore mode.
- view date during restore
- view size of file, date & hours during backup on CD
- ________________________________________________________________
-
-2001/12/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
- tmpfs
-
-2001/12/14 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.
-
-2001/12/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
- PCI entries :
- what's in mar files --> what's given by modules (e.g. just
- as update_kernel does)
-
-2001/12/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: use "askdisplay" to ask a question at begining of install
- for what
- display you want to use during install
-
- * Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
- (from make_boot_img)
- because we need it in perl-install/Makefile also
-
- * mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
- rescue/Makefile: have a bunch of Rescue documentation directly
- available from the Rescue-menu following suggestions
- by Denis among others
-
-2001/12/12 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: enable easy screenshot'ing
- - ensure /usr is formatted if / is
- - remove /var/lib/rpm if /var is kept
-
- * common.pm, docs/README: enable easy screenshot'ing
-
-2001/12/12 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
- xfs module
-
- * bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
- initrd load
-
-2001/12/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
- "filename" in DHCP answers and give this
- to stage2 as --kickstart parameter
-
-2001/12/11 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
- add "\n" keyboard.pm, new modelines
-
-2001/12/10 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added network package not present in @needToCopy
- (package that may be installed
- by DrakX to avoid re-asking of CD1).
-
- * bootloader.pm: added safe guard against looping symlink.
-
-2001/12/10 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, any.pm, bootloader.pm:
- - fix bootloader::add_append
- - add handling of serial console
-
- * http.pm, install_any.pm: enable http:// in auto_install file location
-
-2001/12/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
- * install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
- * bootloader.pm (suggest, add_kernel): much cleanup
-
- * diskdrake.pm: fix call to fileshare_config
-
-2001/12/05 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: updateed logo
-
-2001/12/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c:
- - fix problems with sockets not initialized (disabling
- hotplug support -> cardmgr handles sockets)
- - fix problems with PCMCIA net adapters now using PCI
- modules, by adding PCMCIA base code in `network.img'
-
-2001/12/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
- * pkgs.pm (selectPackage): hard coded preference to simple kernel
-
- * install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
- * diskdrake.pm: fix call to fileshare_config
-
- * steps.pm: createBootdisk now after setupBootloader (together with dumber
- install_any::kernelVersion)
-
- * network/tools.pm: fix missing ";" (thanks to Robert Fox)
-
- * bootloader.pm (suggest, add_kernel): much cleanup
-
- * fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount
-
-2001/12/05 sdupont
-
- * pixmaps/backup_bot2.png: update pixmaps
-
- * standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
- done : bzip2 backup
- merge
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: corrected pixmap path
- corrected pixmap path
-
- * Makefile.config: added drakbackup drakfont
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
- report.bug
-
- * mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
- versions of automatic keywords to beat problems with very long kernel
- commandlines
-
- * install_interactive.pm: try to not get something poorly wrapped
-
- * c/stuff.xs.pm: floppy_info: add missing close(fd)
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: cleaner smbclient call
-
- * install_steps.pm: re-enable supermount by default
-
-2001/12/04 sdupont
-
- * pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
- problems.
-
- * standalone/drakbackup: bzip2 ok for compression to see: decomp without
- pbs whith tar.gz and tar.bz2
- todo: update mode -> decomp + update tar file + recomp
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: re-enable supermount by default
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fix bad parsing of package to copy (when one doen't
- exist anymore) in
- postinstall_rpms directory.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: re-enable supermount by default
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: additional package for wlan
-
- * network/tools.pm: corrected pipe reading
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: make sure lilo is installed on automatic mode.
-
- * install_any.pm: fix bad parsing of package to copy (when one doen't
- exist anymore) in
- postinstall_rpms directory.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
- * mdk-stage1/modules.c: fpons is a sucking chief
-
- * modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
- mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
- support install from USB CDROMS (using usb-storage)
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 sdupont
-
- * standalone/drakbackup: last update... for cooker
- drakbackup deamon -> ok
- drakbackup cvs -> to do (only for /etc)
- drakbackup wizard -> only last step
- drakbackup cd -> device detection and ask for only iso file.
- drakbackup net -> do rsync
- drakbackup begin -> todo : update initial message
- update help and about.
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: additional package for wlan
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: make sure lilo is installed on automatic mode.
-
- * mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: fpons is a sucking chief
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04 sdupont
-
- * standalone/drakbackup: update...
-
-2001/12/03 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: removed use gtk
-
-2001/12/03 François Pons <fpons@mandrakesoft.com>
-
- * tools/updatehdlist: initial revision, simple way to update a local set
- of medium from /RPMS.
-
-2001/12/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: typo of last commit (unused variable -> could not
- compile)
-
-2001/12/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
- and Spanish files
-
-2001/12/03 sdupont
-
- * standalone/drakbackup: update
- option step.
- write other file content.
- restore gi.
-
-2001/12/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/12/01 sdupont
-
- * standalone/drakbackup: do not include browser cache.
-
-2001/11/30 François Pons <fpons@mandrakesoft.com>
-
- * docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)
-
-2001/11/30 gbeauchesne
-
- * partition_table_gpt.pm:
- - cleanups from mainline
-
- * modules.pm: Suckiness fixes from mainline (gc):
- - Do parse /proc/modules in reverse order
- - Fix "convert old scsi_hostadapter's to new probeall" scheme
-
- * bootloader.pm:
- - Don't forget to link the initrd to the real image in /boot/efi/ too
- - Remove DEBUG printouts in install_efi_boot_menu
-
-2001/11/30 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
- Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
- --fileshare, fix smb import
-
-2001/11/30 sdupont
-
- * pixmaps/backup_left2.png: drakbackup pixmap
-
- * standalone/drakbackup: backend mode-> ok for hd
- we can use drakbackup !.
- todo :
- backend mode:
- - net
- - cd
-
- advanced mode:
- - device detection (cd writer)
-
- wizard:
- - end of this step.
-
- gi:
- - option step in adnanced step to choice
- for example tar.gz or tar.gz2 ...
- update
- restore step 1 & 2.
- adv step -> ok
- todo: wizard ...
- little update!
-
- variables correction in advanced step.
- wizard user question, sys question & daemon
-
-2001/11/29 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Remove linux_logo
-
-2001/11/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add wvlan_cs
-
- * mdk-stage1/modules.c: remove unneeded handling of "alias
- scsi_hostadapter"
-
- * mdk-stage1/stage1.c: add another expert_third_party_modules at the end
- of enabling-pcmcia-stuff
-
-2001/11/29 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: remove the export tree for nfs/smb feature, remove some
- test code
- tentative version with export/import nfs/smb tree (committed to have it
- in CVS as the export tree is already deprecated)
-
- * standalone/fileshareset:
- - allow root to export everything
- - remove empty mntpoint (from smb)
-
-2001/11/29 sdupont
-
- * standalone/drakbackup: just update....
- advanced: users correction during save.
- user pass, user login, path to save local or on host
- combo for network protocol.
- wizrad: already to do!
- CDRW burn: todo: devices detection (see to_fond_cd).
- code cleaning.
-
- * standalone/drakfont: cleanning code.
-
-2001/11/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - fix pixel sucks of not parsing /proc/modules in
- reverse order
- - be more in sync regarding names of pcmcia drivers
-
- * any.pm: add modules.conf in report.bug
-
-2001/11/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file
-
-2001/11/28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
- probeall"
-
- * standalone/drakbackup: make check_what_user works
-
- * standalone/fileshareset: better description
- gr_mem in getgrent is space separated, not comma separated
- add samba handling. Should be finished now :)
-
-2001/11/28 sdupont
-
- * pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.
-
- * standalone/drakbackup: no important changement!
- clean code
- update!
- for gc & Warly: some fixes, correction of advanced, wizard and after
- advanced steps.
- the user have a better gestion during advanced step, the protocols ftp,
- sftp, scp, rsync
- are now include in advanced step..... etc ;-)
- todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
- juste after.
- clean code.
- new after advanced step, correction of checkbuttons problems & new
- pixmaps.
-
-2001/11/27 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: updated, cooker style
-
-2001/11/27 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: avoid problem of array reference badly evaluated.
-
-2001/11/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/mailchangelog.pl: beurk
- changelog is at linux-mandrake not mandrakesoft
-
- * install_steps.pm: i810 -> no FB at boot
-
-2001/11/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_gpt.pm (generate_guid): cleanup
-
- * any.pm (setupBootloader): s/last/return/
-
-2001/11/27 sdupont
-
- * standalone/drakbackup: advanced step...
- update.
- advanced mode ... and ...
- read and use user list correctly, advanced step user list.
-
- * pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
- drakbackup.
-
-2001/11/26 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works
-
- * tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
- stage1/stage2 of rtl8139 didn't work
-
-2001/11/26 dam's <damien@mandrakesoft.com>
-
- * common.pm, my_gtk.pm: new features for new mcc
-
-2001/11/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
- of
- auto_inst.cfg is not possible
-
-2001/11/26 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: add $o->{excludedocs} feature
-
- * Makefile.drakxtools: remove unneeded files (*.bs and .exists)
-
- * interactive_gtk.pm: cleanup
-
-2001/11/26 sdupont
-
- * standalone/drakbackup: new gi, advanced step.
- update.
- gawk cmds.
- better use for read and save conf. file now on
- /etc/draxtools/drakbackup/drakbackup.cfg
-
- * pixmaps/backup_hd.png, pixmaps/backup_options.png,
- pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
- DrakBackup.
-
-2001/11/25 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: first version. for the moment, only nfs.
-
-2001/11/25 sdupont
-
- * standalone/drakbackup: update of read_conf_file and default mode.
-
-2001/11/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/es.po: updated Spanish and Danish files
-
-2001/11/24 sdupont
-
- * standalone/drakfont: about...
-
- * standalone/drakbackup: update
- update gi ,build of system, user, other, options interfaces.
- advanced step.
-
-2001/11/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: package for pcmcia is now called "pcmcia-cs"
-
- * any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
- /var/lib/pcmcia/stab
- yes it probably doesn't bring anything valuable but it's
- how life is :-)
-
-2001/11/23 sdupont
-
- * standalone/drakbackup: radio buttons & information message.
- change gi interface, include help, about and pixmaps (backup_*.png on
- standalone/pixmaps directory)
-
-2001/11/22 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: removed loading of agpgart module for i810 card.
-
-2001/11/22 sdupont
-
- * standalone/drakfont: about button & GPL license.
-
- * standalone/drakbackup: update gi.
- TODO: separate all the boxes.
- include wizard and advanced in pixmaps.
- update
- notebook gi.
-
-2001/11/21 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
- mdk-stage1/init-data/msgboot-blank.img.bz2,
- mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg
-
- * Xconfigurator.pm: hack for SiS 640 for laptop.
-
- * install_any.pm: fixed install_urpmi to build a correct urpmi db.
-
-2001/11/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: i810fb
- migrate pcmcia in drakx to use in-kernel version (only
- for 2.4, though --> pcmcia in 2.2 no longer supported)
-
- * install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
- drakx to use in-kernel version (only
- for 2.4, though --> pcmcia in 2.2 no longer supported)
-
- * install2.pm: i810fb
-
- * mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
- mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
- mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
- mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
- mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
- patching untouched imported
- sources from pcmcia-cs-3.1.29, to ease further updates of vendor
- code (start from a clean pcmcia_ subdir)
-
-2001/11/21 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
- the simple
- one, so that 'simple' is the only one required when someone modifies
- %fsedit::suggestions
-
-2001/11/20 gbeauchesne
-
- * partition_table.pm:
- - Add isEfi() to isOtherAvailableFS() test so that install doesn't
- suggest
- to format /boot/efi by default. That way, we could preserve (shame on
- us)
- EFI boot partition generated by Windows XP 64 bits...
-
-2001/11/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
- mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
- mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
- mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
- mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
- mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
- mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
- mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
- mdk-stage1/pcmcia_/probe.c: Initial revision
- version 3.1.29
-
-2001/11/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_stdio.pm: for po i can't use $ for string interpolation
-
-2001/11/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm, standalone/scannerdrake: Corrected English errors
-
- * share/po/hu.po, share/po/cs.po: updated pot file
- updated Czech and Hungarian files
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
- updated pot file
-
-2001/11/19 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (setupBootloader): fix typo
- (setupBootloader): fix typo
-
-2001/11/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Last correction was wrong, reverted it.
-
-2001/11/19 yduret
-
- * standalone/scannerdrake: added dynamic support
-
-2001/11/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: syntax cleanup
- - a little cleanup
- - in case there is both scsi and ide hard drives, go to expert
- questions
- directly (it would need a semi_auto asking on which drive the bios
- boots...)
-
-2001/11/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * keyboard.pm: Added Swedish dvorak keyboard
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/11/12 sdupont
-
- * standalone/drakbackup: new backup tool.
- backend_mode with options.
- begin interactive mode.
-
-2001/10/29 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: code correction
-
-2001/10/29 gbeauchesne
-
- * rescue/list.ia64:
- - Add xfs_repair and efibootmgr
-
-2001/10/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
- * modules.pm: here too
- CDCEther looks good, I add it
-
-2001/10/29 Pixel <pixel@mandrakesoft.com>
-
- * tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29 sdupont
-
- * standalone/drakfont: Copyright (C)
- correction of warning & code cleaning.
- the end.... i think...
- updated
- uninstall interface & progress bar
- uninstall interface : lists & progress bar
- new progress bar update
- todo: second list
-
-2001/10/28 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: cleaning
-
-2001/10/27 daouda
-
- * devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
- * share/rpmsrate:
- - increase icewm weight.
-
-2001/10/26 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
- * partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
- on GPT
-
-2001/10/26 sdupont
-
- * standalone/drakfont: updated.
- search correct progress bar mode implementation.
- updated
- fix some bugs & interface progress implementation.
- TODO:
- progress before backend.
- search if directory already exist before custom install.
-
-2001/10/25 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst: simple variables handled, code compression.
- The new and shiny drakautoinst is coming. P|-|34R
- The new drakautoinst is coming. P|-|34R
-
- * pixmaps/mdk_logo.png: additional logo
-
- * standalone/drakfont: code correction
-
-2001/10/25 sdupont
-
- * standalone/drakfont: merge differents versions.
- file sector, list of fonts for advanced install...
- applications choice, license widget, help widget.
-
-2001/10/24 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: updated
- updated
- updated, lot of bugs.
- updated
-
- * my_gtk.pm: added set_editable
-
-2001/10/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
- mdk-stage1/.cvsignore, rescue/install_bootloader,
- rescue/tree/etc/rc.sysinit, rescue/Makefile,
- mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
- rescue/tree/etc/issue, rescue/make_rescue_img,
- mdk-stage1/newt-frontend.c:
- - add a GUI to the rescue
- - provide guessmounts with better efficiency and output, go to
- console, and reboot
- - provide install_bootloader which runs lilo from /mnt if it seems
- safe
- - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: replace /initrd with /lib/initrd
- (hds): in case of GPT, allow ext2 to be replaced by any kind of
- partitions (esp. EFI)
-
- * partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
- partition_table_raw.pm: add methods first_usable_sector and
- last_usable_sector
-
- * fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24 sdupont
-
- * standalone/drakfont: scroll
- `
- import_status & progress.
- gi update.
-
-2001/10/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm: tagged as translatable some left out strigns
-
-2001/10/23 sdupont
-
- * standalone/drakfont: gi update
- doc and progress bar.
- gui: install from directory
- gui supported.
-
-2001/10/23 yduret
-
- * share/po/fr.po: fixed fohtes grammar
-
-2001/10/22 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22 Pixel <pixel@mandrakesoft.com>
-
- * rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19 gbeauchesne
-
- * partition_table_gpt.pm:
- - Use /dev/random through devices::make() instead of /dev/urandom
- - Localize file descriptor
- - Capitalize error message if no /dev/random found
-
- * partition_table.pm:
- - s/Win98 FAT32/FAT32/
- - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
- - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: OOize can_raw_add
-
- * partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
- partitions on ia64)
- - raw_add, can_raw_add moved to partition_table_raw
- - using raw_removed
-
- * partition_table_dos.pm: better handling of CHS overflow (mainly for non
- cylinder-boundary aligned part (like ia64))
-
- * partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
- don't adjust since totalsectors / cylinder_size may not be an integer
- (zero_MBR): defaults to GPT on ia64
- (raw_add, can_raw_add, raw_removed): created, can now be overloaded in
- partition_table_*.pm's
- (get_geometry): keep the total_sectors as given by c::total_sectors,
- don't try to recompute it based on nb_cylinders (for hds where
- total_sectors is not a multiple of nb_cylinders)
-
- * common.pm: cleanup
-
- * partition_table_gpt.pm: fix ending is last sector, not next one
- add TODO for partition entry guid
- - writing partition table now works
- - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: corrected GET_FL and co
-
-2001/10/18 François Pons <fpons@mandrakesoft.com>
-
- * standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
- use rgb.txt instead).
-
-2001/10/18 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_gpt.pm:
- - add checksum verif on partition entries
- - detect the type of partition since the partition table types seem
- quite poor
- read part of GPT partition table working
-
- * fsedit.pm:
- - add checksum verif on partition entries
- - detect the type of partition since the partition table types seem
- quite poor
-
- * partition_table.pm: read part of GPT partition table working
- shorter GPT name
-
- * detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18 sdupont
-
- * standalone/drakfont: change Fontmap ghostscript file.
- drakfont support now .gsf fonts
- end of backend......
- update
-
-2001/10/17 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: typo
-
-2001/10/17 sdupont
-
- * standalone/drakfont: implementation of type1 fonts removing.
- ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: correct bad level display
-
- * standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
- * rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
- rescue/list.ppc: typo in update kernel by /me
- fine-tune sanity_check for ppc
- move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/10/15 yduret
-
- * scanner.pm: wonderful perl forgotten
-
-2001/10/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
- supported
-
-2001/10/12 sdupont
-
- * standalone/drakfont: support all installations, and support xfs,
- ghostcript, staroffice.
- todo aplli: openoffice, gimp, abiword, netscape & other browsers...
- todo or to see: --strong ttmkfdir -c ???
- emd of backend..
-
-2001/10/11 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: multiple card configuration bug corrected.
- allelluia.
-
- * network/tools.pm: aded use c
-
- * standalone/drakfont: code review
-
-2001/10/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11 sdupont
-
- * docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
- docs/drakfont/drakfont.dvi: clean directory..
-
- * docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
- docs/drakfont/dia_srcs/drakfont_uninstall.dia,
- docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
- * standalone/drakfont: improved....
- improved && implement remove fonts for xfs
- improved
- improved
- optimisation
- correction of option install --replace
- dialog of install options
- correction of install option.
-
- * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
- docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
- ps with -kb option
- clean...2
-
-2001/10/10 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: typo
- improved options handling
-
- * standalone/net_monitor: ergo and features improvments, pipe handling
- correction
-
- * network/tools.pm: updated
-
-2001/10/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: normalize the default type entry ("entry")
-
- * interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10 sdupont
-
- * standalone/drakfont: option replace for "install from" &
- windows_import...
- update install dir
- better for --install
- new version of drakfont. in perl langage.
-
- * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
- docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
- docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
- docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
- docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
- drakfont
-
-2001/10/10 yduret
-
- * standalone/scannerdrake: first apparition on earth..
-
- * Makefile.config: added scannerdrake
-
-2001/10/09 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: removed trash
- connection test is now in background, corrects the interface freeze
- problem
-
- * pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
- * standalone/net_monitor, standalone/draknet: connection test is now in
- background, corrects the interface freeze problem
-
-2001/10/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2001/10/09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: fix detecting read-only drives (like memory-sticks)
-
- * partition_table.pm: make perl_checker happy
-
- * partition_table_raw.pm: fix detecting read-only drives (like
- memory-sticks)
- make perl_checker happy
-
- * modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
- of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
- keycodes on PPC, add additional Apple modelines
-
- * install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08 dam's <damien@mandrakesoft.com>
-
- * c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
- they have been
- removed from the skip list for stage1.
-
- * rescue/tree/etc/oem: added silly modification to avoid using more than 7
- partition for DAC960 (/home
- and /var are not created in the current state).
-
-2001/10/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
- * mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
- PPC systems with DOS partition table
-
-2001/10/05 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added (missing) creation of
- /hd/boot/grub/device.map (needed for
- CompactSmartArray).
-
-2001/10/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
- use all disk space for
- partition.
- added another psacct log file in touch.
- fixed typo on scalar reference for psacct bug.
- updated with 8.1 OEM ProSuite.
-
- * tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2001/10/04 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: synced with oem script.
- removed 3D games not installed by default.
-
- * rescue/tree/etc/oem: fixed typo in produced patch.
- added extension to pro suite CD (added kernel-enterprise to possibly
- installable
- and install kernel22).
- removed 3D games not installed by default.
- added missing xmms-arts.
- allow halting.
-
-2001/10/03 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: yet another ataraid support patch
-
-2001/10/02 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix previous hack.
- added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c: new pci-ids.h
-
- * mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
- * share/po/fr.po: small fix
-
- * standalone/drakgw: don't call pkgs_install when no package needs to be
- installed
-
-2001/10/02 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: bloody ataraid detection
-
- * devices.pm: ataraid devices support
-
-2001/10/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
- * rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
- kernel-enterprise from list of
- package installable in oem mode, added possibility to set language on
- /etc/oem
- script invocation.
-
- * install_steps_interactive.pm: avoid chooseCD on oem install.
-
- * install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
- * install_any.pm: use $boot_medium for default medium in oem install,
- avoid using kernel22 or
- kernel-enterprise in oem install (space available is too tight on CD oem
- version).
-
- * tools/oem-prepare: synced with oem script.
-
-2001/10/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
- what's in the marfiles
-
-2001/10/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated Bulgarian file
-
-2001/09/29 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * docs/README: New adress where to find the kernel BOOT
-
-2001/09/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/09/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/drvinst: don't install usb keyboard drivers more than once
- try to fix usb keyboards
-
-2001/09/27 kjx
-
- * share/po/zh_CN.po: translating
-
-2001/09/26 gbeauchesne
-
- * install_any.pm:
- - Suggest /boot/efi on IA-64 for the first VFAT partition found,
- instead
- of /mnt/windows
-
- * bootloader.pm:
- - bootloader.pm (suggest): don't search for dos (or windows) boot
- partition
- on IA-64 since ELILO can only boot Linux.
- - bootloader.pm (write_lilo_conf): don't cry if we don't have
- /boot/boot.b
- or boot/message on IA-64.
-
- * rescue/list.ia64:
- - Add file list for "rescue" disk
-
- * share/list.ia64, partition_table.pm:
- - partition_table.pm: Add XFS suggestion for IA-64
- - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25 baudens
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
- Remove totally crazy translation.
- Translators, please use your brain!
-
-2001/09/25 gbeauchesne
-
- * partition_table.pm:
- - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25 warly
-
- * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
- installed for newbie and drakfirsttime does not fail.
- put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
- does not fail.
-
-2001/09/25 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: allow non ejectable medium to allow all
- hdlists on the bootable medium.
- make current boot medium already selected if multiple hdlist are on this
- boot medium.
-
-2001/09/25 warly
-
- * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
- installed for newbie and drakfirsttime does not fail.
- put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
- does not fail.
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po: corrected translation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
- mdk-stage1/disk.c: hd.img now detects partition types... backport from
- DrakX :-)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount_part): fix for iso loopback mounted
-
- * share/po/fr.po: fix
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/isdn.pm: type assignation bug fix
- corrected type assignation
-
- * share/po/fr.po: corrected bad translation
-
- * standalone/draknet: corrected type assignation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootloader.pm: fix add_append (there was a ) at the end of the parameter
- value)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount_part): fix for iso loopback mounted
-
- * share/po/fr.po: fix
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * modules.pm: corrected isdn firmware
-
- * network/adsl.pm, network/isdn.pm: type assignation bug fix
- corrected type assignation
-
- * share/po/fr.po: corrected bad translation
-
- * standalone/draknet: corrected type assignation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootloader.pm: fix add_append (there was a ) at the end of the parameter
- value)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix small error merging existing fstab
-
- * share/po/fr.po: fix
-
- * diskdrake.pm: do not propose to mount/umount removable medias (disabled
- for now)
-
- * diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/ethernet.pm: bug fix
-
- * modules.pm: corrected isdn firmware
-
- * network/isdn.pm, network/adsl.pm: type assignation bug fix
- corrected type assignation
-
- * standalone/draknet: corrected type assignation
-
- * install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
- during install
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
- problems reported with it.
-
- * share/rpmsrate: allow rpm build for non expert who choose development.
-
- * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
- packages).
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix small error merging existing fstab
- add "iocharset=" for cdrom
-
- * install_steps.pm:
- - disable supermount by default
- - cleanup nsswitch.conf wins removing
-
- * diskdrake.pm: do not propose to mount/umount removable medias (disabled
- for now)
-
- * diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24 siegel
-
- * share/po/de.po: new german version
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
- problems reported with it.
-
- * share/rpmsrate: allow rpm build for non expert who choose development.
- removed any reference to XFree86-glide-module or Glide_XXX packages.
-
- * pkgs.pm: sort mediums by number, in allMediums() else they will be in
- hash keys orders in
- install_steps_interactive::chooseCD().
-
- * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
- packages).
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: add "iocharset=" for cdrom
-
- * install_steps.pm:
- - disable supermount by default
- - cleanup nsswitch.conf wins removing
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: removed any reference to XFree86-glide-module or
- Glide_XXX packages.
-
- * pkgs.pm: sort mediums by number, in allMediums() else they will be in
- hash keys orders in
- install_steps_interactive::chooseCD().
-
-2001/09/24 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: File permission settings during install were not done.
- Fixed.
-
-2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: misc typo correction
-
- * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
- * share/rpmsrate: simplify (for the moment)
- do not force X flag, have it selected for any "Graphical Environment"
-
- * share/compssUsers, install_any.pm: do not force X flag, have it selected
- for any "Graphical Environment"
-
-2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
- * share/po/zh_TW.po: updated Chinese file
-
-2001/09/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
- * fsedit.pm: add magic SWAPSPACE2
-
- * bootloader.pm: allow bootloader on fat partitions
-
- * share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
- have it selected for any "Graphical Environment"
-
-2001/09/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version is 8.1
-
-2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated Bosnian file
-
-2001/09/22 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, install2.pm:
- - cleanup noatime option setting
- - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
- * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated Bulgarian file
-
-2001/09/22 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added support for automatic /dev/... file permissions
- setting by devfsd.
- Improved matching of auto-detection results with database entries.
- Given hint to the user to select the correct model when matching fails.
-
- * printer.pm: Added support for automatic /dev/... file permissions
- setting by devfsd.
-
-2001/09/21 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
- functionality is lost
- small fix for "vn" keyboard (enable toggle key)
-
- * share/po/ko.po: updated Korean file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * printerdrake.pm: small fix
-
-2001/09/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: When one changes the driver of a freshly
- added printer, the cursor was not pointed to the old driver, fixed.
- Fixed paper size not set according to chosen language during
- installation.
-
-2001/09/21 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: typo
-
-2001/09/21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: reworked medium management.
- moved com_license to parent package (as code that show the license is
- now
- available even for non gtk install).
-
- * Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
- * pkgs.pm, install_any.pm: reworked medium management.
-
- * detect_devices.pm: avoid detecting plip for live upgrade.
-
- * install_steps_interactive.pm: avoid keeping testing code.
- reworked medium management.
- added code to support changeable cdrom, set a unique copy of license for
- installing commercial application as package variable (exported).
-
-2001/09/21 gbeauchesne
-
- * share/po/no.po: remove trailing '\n'
-
-2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po, share/po/no.po: updated pot file
- updated pot file
- updated Norwegian and Hungarian files
- updated pot file
-
- * help.pm: updated help file
-
- * share/po/help_xml2pm.pl: updated pot file
-
- * printerdrake.pm: small fix
- changed text strings to be more translator friendly
- (NEVER EVER cut a phrase)
-
- * share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
- updated pot file
- corrected extra \n
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
- updated pot file
- updated pot file
-
- * keyboard.pm: adapted keyboard priority numbers (it is useless to give a
- multichoice with a
- value higher than 90)
-
- * share/po/zh_TW.po: updated pot file
- updated pot file
-
-2001/09/21 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: write password in lilo.conf even if it's also done by
- msec, otherwise lilo will fail with restricted only
-
- * install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
- * share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
- libsafe and kernel22-secure
-
-2001/09/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21 warly
-
- * share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partition_with_diskdrake): ensure the $::expert
- flag modifications in
- diskdrake do not escape from diskdrake
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- check bad blocks for xfs and jfs
-
-2001/09/20 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't reapply the conf, if already applied.
- usefull for dhcp, because the network should be restarted after
- configured
-
- * network/adsl.pm: test if microcode is there
-
- * bootlook.pm: removed blocking die
-
-2001/09/20 fcrozat
-
- * share/rpmsrate: Add gnome-user-docs to GNOME install
- Install Mdk eazel engine for gnome
-
-2001/09/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
- this cause
- problem in live_upgrade.
-
- * Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
- * network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: misc
-
-2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/cs.po: updated Czech file
-
- * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
- Chinese and Dutch files
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partition_with_diskdrake): ensure the $::expert
- flag modifications in
- diskdrake do not escape from diskdrake
-
- * share/rpmsrate: raise i18n fonts
-
- * fsedit.pm (hds): do a get_major_minor where needed
-
- * lang.pm: replace xcin by chinput as per Alex request
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- check bad blocks for xfs and jfs
-
-2001/09/20 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed flow of the program for the "recommended" mode of
- the installation.
-
-2001/09/20 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't reapply the conf, if already applied.
- usefull for dhcp, because the network should be restarted after
- configured
-
- * mouse.pm: text positionning
-
- * standalone/net_monitor: less gethostbyname
-
-2001/09/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
- this cause
- problem in live_upgrade.
-
- * network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
- Chinese and Dutch files
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: raise i18n fonts
- s/telnet-server/telnet-server-krb5/
-
- * fsedit.pm (hds): do a get_major_minor where needed
-
- * fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
- * lang.pm: replace xcin by chinput as per Alex request
-
- * printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Make it possible to configure more than 1 printer in a
- "recommended" mode installation.
-
-2001/09/19 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
- restart at better place
-
-2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: updated pot file
- updated help xml
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
- share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
- share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
- updated help xml
-
- * share/po/wa.po: updated pot file
- updated pot file
-
-2001/09/19 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
- restart at better place
-
-2001/09/19 fcrozat
-
- * share/rpmsrate: Add mdk-eazel-engine
-
- * share/po/fr.po: Fix french mistakes
-
-2001/09/19 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added code to check if package are really installed.
-
- * Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
- make only bad card Riva128 for testing XF4.
- Riva128 is now a bad card.
-
-2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: raklet quoting
-
- * share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19 Pixel <pixel@mandrakesoft.com>
-
- * loopback.pm (create): don't use seek to create big files otherwise you
- get hole and
- swapon doesn't like it
-
- * any.pm (ask_users): default icon "man"
-
- * lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
- * install2.pm: initial support for server install
- compatibility with older $o->{lang} names (for auto_installs)
-
- * install_steps_gtk.pm: initial support for server install
-
- * printerdrake.pm: help perl_checker
-
- * pkgs.pm, share/rpmsrate, install_any.pm:
- - gmc instead of nautilus for non-latin1 installs
- - introduce CHARSET flag and use it
-
-2001/09/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Network is now only required (and checked) for remote
- printers.
- Several buglets fixed in remote CUPS server dialog.
-
- * printerdrake.pm: Removed a forgotten debug help line from the code.
- Fixed typo in dialog text of high/paranoid security.
- Network is now only required (and checked) for remote printers.
- Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: don't create bootdisk by default
-
- * share/po/fr.po: misc
-
-2001/09/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
- * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
- installs
-
-2001/09/18 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
- * network/netconnect.pm: don't ask to connect if lan or dhcp
-
- * standalone/drakgw: debug
-
-2001/09/18 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added X group with SYSTEM.
- finally work arounded rpm bug by flepied.
-
- * detect_devices.pm: added back full pci probe for stage2 command lspci.
- removed full pci probe for stringlist (used for generating report_bug).
-
- * install_steps_interactive.pm: now finally really fixed printer label in
- summary dialog.
- fixed printer description in summary (again).
- fixed no printer displayed (at least, print Remote CUPS server).
-
- * commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18 gbeauchesne
-
- * Xconfigurator.pm:
- - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
- * tools/ia64/elilo.efi:
- - elilo 3.1
-
-2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: don't create bootdisk by default
-
- * standalone/drakautoinst: have "manual" and "replay" translated
-
- * share/po/fr.po: misc
-
-2001/09/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2:
- - remove ISO-8859-5, KOI8-R and KOI8-U
- - cleanup packdrake extracting locales
- - cleanup/fixes lang.pm
-
- * install_steps.pm: fix setting kdmrc for latin1
-
- * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
- * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
- installs
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/list: updated for rpm 4.0.3.
-
- * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
- "rpm --root" but need more testing.
-
- * standalone/XFdrake: removed comment.
- added support to configure NVIDIA driver if everything is correctly
- installed.
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, fsedit.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
-
-2001/09/17 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
- in expert install.
-
-2001/09/17 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/list: updated for rpm 4.0.3.
-
- * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
- "rpm --root" but need more testing.
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
- * Xconfigurator.pm: deactivating bad card test (too).
-
- * standalone/XFdrake: removed comment.
- added support to configure NVIDIA driver if everything is correctly
- installed.
-
-2001/09/17 odin
-
- * share/po/fr.po: updated fr.po
-
-2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
- English language but also euro symbol can choose it.
- fixed Belgian keyboard
-
- * share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
- Wallon files; corrected error syntax in French file
-
- * lang.pm: Added choice of "English|Ireland (euro)" so people wanting
- English language but also euro symbol can choose it.
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
- (mount): do not hand update /etc/mtab for nfs mounts, already done by
- mount(8)
- (set_default_options): disable iocharset= and codepage= for supermount
-
- * partition_table.pm (adjust_main_extended): do not use linux extended
-
- * detect_devices.pm (pci_probe): log full pci probes
-
- * standalone/drakbug_report: fix
-
- * fsedit.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
-
-2001/09/17 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
- in expert install.
- Do not die when "chkconfig" fails (needed for "security_check").
- Added "-q" option to foomatic-configure (should not get interactive).
- Added handling of high and paranoid security levels.
-
- * printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
- mode installation.
- Added handling of high and paranoid security levels.
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (pci_probe): log full pci probes
-
- * fs.pm (set_default_options): disable iocharset= and codepage= for
- supermount
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
-2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
- * pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug which prevented from printing the option list
- during install.
- Fixed bug which prevents printerdrake from running without PDQ
- installed.
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
- more up to my need ALL flag in compssUsersChoice
- remove auto-install special case (initialisation of compssUsersChoice)
-
- * share/rpmsrate:
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * pkgs.pm: more up to my need ALL flag in compssUsersChoice
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
- MDK::Common
-
-2001/09/16 siegel
-
- * share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug which prevents printerdrake from running without
- PDQ installed.
-
-2001/09/16 dam's <damien@mandrakesoft.com>
-
- * mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help.pm file
-
- * share/po/hu.po: updated Hungarian file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
- * fsedit.pm: enhance lvm handling (mostly standalone)
- - cleanup & enhance raid mdstat reading (now works with or without
- devfs mounted)
- - chunk size is buggy?
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
- more up to my need ALL flag in compssUsersChoice
- remove auto-install special case (initialisation of compssUsersChoice)
- use new mkdir_p, rm_rf and cp_af from MDK::Common
-
- * share/rpmsrate:
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * verify_c: add special case for c::to_utf8
-
- * pkgs.pm: more up to my need ALL flag in compssUsersChoice
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
- use new mkdir_p, rm_rf and cp_af from MDK::Common
-
- * services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
- tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
- network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
- any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
- mkdir_p, rm_rf and cp_af from MDK::Common
-
- * diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
- standalone)
-
- * devices.pm (make): ensure it never returns a non-absolute name
- (it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16 siegel
-
- * share/po/help_xml2pm.pl: added "systemitem"
- added commet explainig that help.pm is automatically generated.
-
- * .cvsignore: added .*.sw? for vim users
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added possibility to list command line
- options for the printers and to give the users help for printing
- Fixed bug of sometimes appearing the wron dialog after printing test
- pages
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix options appearing twice in fstab
-
- * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix options appearing twice in fstab
-
- * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 civileme
-
- * help.pm: Added a dialog in English for users selecting a printing system
- since no other
- OS seems to offer such a choice during install.
-
-2001/09/15 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: better connection testing
-
- * network/tools.pm: more timeout
-
- * network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
- * mouse.pm: readded darea realization
-
-2001/09/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
- * share/po/es.po: updated Spanish file
-
- * share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * Makefile.config, tools/Makefile: add aewm-drakx
-
- * install_steps_gtk.pm: makes cancel on mouse selection works even better
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
- tools/aewm-drakx/README:
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * any.pm: i18n kdmrc
- fix user icons choice
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install2.pm: don't warn if modules are missing when testing
-
- * bootloader.pm: find error in /tmp/.error only if exception is "xxx
- failed"
- (write_lilo_conf): ensure linear and lba32 are not both set
-
- * share/po/fake_c.pl: fix a tricky hack
-
- * my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
- more keyboard focus)
-
- * c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_interactive.pm: fix typo
- find error in /tmp/.error only if exception is "xxx failed"
- makes cancel on mouse selection works even better
- fix cancel on mouse choice
-
- * install_steps.pm: i18n kdmrc
- enable supermount again
-
- * network/adsl.pm: correct dams typo
-
- * fs.pm (write_fstab): fix supermount moving from options to fstype
-
- * steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
- * tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
- tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
- new map_request event (fix summary step)
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 siegel
-
- * share/po/de.po: fixed another typo
- new string
-
- * printerdrake.pm: added missing _()
-
- * standalone/draksec: use " instead of ' to get i18n
-
- * standalone/draknet: fixed missing _()
-
-2001/09/15 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added the PDQ panic button.
- Removed a superfluous "set_help" line.
- Save default spooler at program start, fixed typos in comments.
- Command line commands as "lpr", "lpq", ... are mapped to the correct
- spooler now.
- Fixed bug of a waiting message appearing together with a dialog
- Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
- for a printer
-
- * printer.pm: Added the PDQ panic button.
- Command line commands as "lpr", "lpq", ... are mapped to the correct
- spooler now.
-
- * standalone/printerdrake: Fixed bug of spooler choice via command line
- options being ignored.
-
-2001/09/15 warly
-
- * share/rpmsrate: add drakfirsttime
-
-2001/09/14 dam's <damien@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: make test_pms happy
-
- * install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
- * Xconfigurator.pm: no shadow when X test
-
- * standalone.pm: bugfix
-
- * my_gtk.pm: no icon if wizard
- no shadow when X test
- shadow color
-
- * bootlook.pm: bugfix
- iautologin correction
-
- * mouse.pm: trying to remove draw
-
- * network/adsl.pm: debug
- pptp-adsl instead of pptp-adsl-fr
- bugfix
- updated speedtouch handling.
-
-2001/09/14 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: removed S3 ViRGE card from card with problem with
- frame buffer as it works fine.
-
- * Xconfigurator.pm: fixed filtering of depth for newt version.
- depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
- depth
- 32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
- fine
- for Rage 128.
- apply restriction on depth available when changing resolution, removed
- S3 ViRGE
- from experimental 3D accelerated card list as it really does not work,
- allow on
- second pass to change card configuration to choose server (experimental
- server
- are still only available to expert), added support for UseCCEFor2D for
- Rage 128
- card if a TV card is installed (set to true, else set to false), added
- support
- for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
- error
- message display to catch only appropriate error message of XFree 4.1.0
- only,
- added support for 32 bits for DRI using Matrox card, improved info
- message with
- real version of XFree used (anybody) and identifier from PCI probe
- (expert).
-
-2001/09/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
- * mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
- a reduced form of mkinitrd_helper for mkinitrd (only
- to provide a dietlibc-enabled static insmod)
-
-2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
-
- * share/po/ko.po: updated Korean file
-
- * share/po/da.po: updated Danish file
- updated Danish file
-
- * share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm, install_any.pm: when testing for bad drives, if
- opening for writing fails, remove the drive from the hard drive list
- (useful for Smartmedia readers)
-
- * pkgs.pm: update correctSize and invCorrectSize (now linear)
-
- * share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
- * share/rpmsrate: do not install Aurora in russian
-
-2001/09/14 siegel
-
- * share/po/de.po: updates
-
- * standalone/drakautoinst: Check exisence of "/root/replay_install.img"
- before anything else ...
-
-2001/09/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added "set_help" lines for installer help texts.
- Raw queue entry added, so cursor not always on "Alps MD-1000" when no
- printer
- detected.
- Resolved conflict.
- Now it is checked whether the network is configured and running.
- draknet is called when the network is not configured.
- It is checked whether the spooler is automatically started at boot.
- The oki4daemon is started when needed.
- Lexmarks inkjet drivers are fully integrated.
- The permissions of the device files are set so that normal users can
- print with PDQ.
-
- * standalone/printerdrake: Fixed spooler selection by command line.
-
- * printer.pm: Raw queue entry added, so cursor not always on "Alps
- MD-1000" when no printer
- detected.
- Made network checking working on non-english systems.
- Now it is checked whether the network is configured and running.
- draknet is called when the network is not configured.
- It is checked whether the spooler is automatically started at boot.
- The oki4daemon is started when needed.
- Lexmarks inkjet drivers are fully integrated.
- The permissions of the device files are set so that normal users can
- print with PDQ.
-
-2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
- share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2001/09/13 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13 odin
-
- * share/po/fr.po: updated up to 6648
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: new migration feature for creation of
- partitions on existing mount points
-
- * diskdrake.pm:
- - add back shortcuts
- - red colored buttons in nfs/smb/removable
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
- * my_gtk.pm: updated
- addde /usr/share/icons in path for pixmaps search
- shadow reduced to 5 pixels
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
- trouble to XFree86 4.1.0.
-
- * Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
- fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13 odin
-
- * share/po/fr.po: updated up to 6648
- updated fr.po
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add krozat
-
- * any.pm (inspect): use a safer dir when standalone
-
- * install_steps.pm: extend disable KDE GreetString to
- ja|ko|zh|ru|th|vi|be|bg
- do not translate kdm GreetString in ja|ko|zh (what about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
- * diskdrake_interactive.pm: new migration feature for creation of
- partitions on existing mount points
-
- * diskdrake.pm:
- - add back shortcuts
- - red colored buttons in nfs/smb/removable
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
- mode if >=90, not >90
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: shadow reduced to 5 pixels
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
- fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
- avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
- * services.pm: updated repartition of services into category, network
- category are commented so
- that service will to "Other" one.
-
- * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
- trouble to XFree86 4.1.0.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm: filtered the list from lang2keyboard to display only valid
- keyboards
-
- * c/stuff.xs.pm: add partition adding on the fly trick
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
- about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * lang.pm: fixed bad $localedir in load_mo().
-
- * g_auto_install: updated so that this scripts is running again.
-
- * install2.pm: do not output error message for bad kernel if using
- --g_auto_install.
-
- * install_steps_interactive.pm: fixed Printer name reporting for a
- specific printer.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * services.pm: updated repartition of services into category, network
- category are commented so
- that service will to "Other" one.
-
- * live_install2: updated #! as ../perl is not used.
-
- * my_gtk.pm: synced with --g_auto_install mode.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
- * Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
- avoid creating /etc/X11/XF86Config* file if --g_auto_install.
- synced with --g_auto_install mode.
- disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
- share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
- share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
- share/po/id.po: updated pot file
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm: filtered the list from lang2keyboard to display only valid
- keyboards
-
- * c/stuff.xs.pm: add partition adding on the fly trick
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install2.pm (selectKeyboard): remove code causing
- install_steps::selectKeyboard to be skipped
-
- * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
- about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: typo
- new color for shadow
- corrected shadow handling
- no shadow if liveupdate
-
- * share/help.png: new help
-
- * mouse.pm: removed debug code
-
- * network/tools.pm, network/netconnect.pm, network/ethernet.pm,
- network/isdn.pm, network/adsl.pm, network/modem.pm: new default
- connection handling
-
- * standalone.pm: added wait message while installing package
-
-2001/09/12 daouda
-
- * standalone/drakbug_report: add Mandrake release section
-
-2001/09/12 fcrozat
-
- * share/rpmsrate: Fix gnome install
-
-2001/09/12 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: removed obsolete --nocpi flag for install2.
- avoid probing usb device (for mouse) if --noauto is given.
-
- * install_steps.pm: disabled frame buffer for most of the SiS display card
- except SiS 630.
-
- * Xconfigurator.pm: added MGA G550 as always having two head.
-
- * live_install2: fix when switching perl version.
-
- * live_install: use system perl instead.
-
-2001/09/12 gbeauchesne
-
- * share/list.ia64, share/list, share/list.i386:
- - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
- - list.i386: ... Here.
- - list.ia64: Updates.
-
-2001/09/12 odin
-
- * share/po/fr.po: updated fr.po
-
-2001/09/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
- share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
- share/po/it.po, share/po/af.po: updated pot file
-
- * help.pm: new version with [ and ]
-
- * lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: fix typo
- added wonderful lsnetdrake
-
- * modules.pm, install2.pm: display error when the kernel mismatch the
- modules
-
- * docs/README: explain how to get the boot kernels
-
- * install_steps_gtk.pm (choosePackagesTree): translate the categories
-
- * standalone/drakbug_report: cleanup
-
- * bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
- (suggest): no "quiet" boot for smp and enterprise kernels
- allow grub even for more than 800MB
-
- * Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12 siegel
-
- * share/po/de.po: new & shiny verion
-
- * share/po/help_xml2pm.pl: fixed silly error
- added keycap patch
-
-2001/09/12 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected shadow handling
- no shadow if liveupdate
- table undef corrected
- removed shadows if standalone
-
- * standalone/drakgw, standalone/draknet: corrected wizard mode in newt
- mode
-
- * mouse.pm: removed debug code
-
- * network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12 daouda
-
- * standalone/drakbug_report: add Mandrake release section
-
-2001/09/12 François Pons <fpons@mandrakesoft.com>
-
- * live_install2: fix when switching perl version.
-
- * live_install: use system perl instead.
-
-2001/09/12 kjx
-
- * share/po/zh_CN.po: revison
-
-2001/09/12 Pixel <pixel@mandrakesoft.com>
-
- * docs/README: explain how to get the boot kernels
-
- * install_steps_gtk.pm (choosePackagesTree): translate the categories
-
- * standalone/drakbug_report: cleanup
-
- * bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: removed useless print
- don't detect ethx if no autodetection.
- implement smarter checkboxes
-
- * mouse.pm: test updated
- mouse test worked
-
- * network/ethernet.pm: don't detect ethx if no autodetection.
- implement smarter checkboxes
-
- * pixmaps/arrow_down.xpm: pixmap corrected
- new arrows
-
- * pixmaps/arrow_up.xpm: new arrows
-
- * share/rpmsrate: added ibod
- added isdn-light
-
- * interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: small fix
-
- * share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
- share/po/it.po: updated Hungarian file;
- updated pot file
-
-2001/09/11 Pixel <pixel@mandrakesoft.com>
-
- * Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
- * bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
- a primary
- partition (otherwise lilo dies)
-
-2001/09/10 dam's <damien@mandrakesoft.com>
-
- * network/modem.pm, network/ethernet.pm: detect_devices
-
- * standalone/net_monitor, network/network.pm: removed timeout:1 in
- resolv.conf, modified timeout scanning in draknet/net_monitor
-
- * install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
- * mouse.pm: test_mouse moved
-
- * my_gtk.pm: added border
- window decorations
- no set_events if embedded
-
- * standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
- scanning in draknet/net_monitor
- debug
-
- * standalone/mousedrake: don't fork the code
-
- * network/adsl.pm: debug
- debug
-
-2001/09/10 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated g_auto_install() for newer printerdrake
- interface.
-
- * modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
- detect_devices::pcmcia_probe.
-
- * mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
- blank.img floppy image.
-
- * install_steps_interactive.pm, mouse.pm: added hid type usb mouse
- support.
-
- * Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
- 1024x480 but not automatically used).
-
-2001/09/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: plop
- some adjustements in Games section
-
-2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
- various quotes in help_xml2pm.pl
- Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/zh_TW.po: updated Chinese file
-
- * share/po/ko.po: updated Korean file
- Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/help_xml2pm.pl: updated German file; added choice of various
- quotes in help_xml2pm.pl
-
-2001/09/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm:
- - make diskdrake work in embedded mode
- - $my_gtk::pop_it used where it should
-
- * detect_devices.pm: fix ide-scsi appearing 2 times when standalone
- because both in /proc/ide
- and /proc/scsi/scsi
-
- * share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
- - skip directories missing drakx-help.xml
- - convert to the right charset (taken from $lang.po)
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
- * diskdrake.pm:
- - make diskdrake work in embedded mode
- - $my_gtk::pop_it used where it should
- fix Umount and Mount when i18ned for nfs/smb
- don't display Wizard if wizard done before DrakX
-
- * share/po/Makefile, share/po/.cvsignore:
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
-2001/09/10 siegel
-
- * share/po/de.po: updates
-
-2001/09/10 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
- modified to not get
- interactive when overwriting a file.
- Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
- able to
- identify which PPD from /usr/share/cups/model was used (for
- auto-install).
-
-2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated pot file;
- removed translations that are too low on percentage.
-
-2001/09/10 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl:
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: probeall handling
-
-2001/09/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/sv.po: updated Swedish file
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (ejectCdrom): fix D state on exit
-
- * diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm:
- - "Wizard" and "More" are back
- - allow "Use for loopback" when there is already a loopback
- - set the options on newly created partitions
- - recompute_loopbacks called after modification of loopbacks, no more
- before reading
- - restrict the lenght of the lines in partition description
- - make loopback work
-
- * interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
- clicked_may_quit used in place of clicked+exception to work-around
- perl-GTK bug (?)
-
- * share/po/i18n_compssUsers: ensure we're not adding a string already
- there (otherwise msgmerge yells)
-
- * share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
- handling/enhancing for multi-langs
-
- * modules.pm: probeall handling
- (write_conf): switch to "probeall scsi_hostadapter ..."
-
- * share/po/Makefile: xml help handling/enhancing for multi-langs
- xml help handling/enhancing for multi-langs
-
- * partition_table.pm (get_normal_parts_and_holes): remove only small
- holes, not small partitions
-
- * fs.pm (set_default_options): remove iocharset=... for nfs (why was it
- there?)
-
-2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix some ortograf
-
- * share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: force exitInstall to be non automatic
-
- * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
- diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
- installs work again
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix some ortograf
-
- * share/rpmsrate: lvm not installed for everyone ?!
-
- * modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
- flush it when
- it didn't decide to put any modules in it (to leave user's modules) (2)
- it
- doesn't remove the last line (3) it uses stronger regexp'es for
- substitution to not remove modules that have names made of other modules
- names subsets
-
-2001/09/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_TW.po: updated Chinese file
-
-2001/09/08 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm: fix font in iso-15
-
- * modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
- * interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
- with nested subs)
-
- * share/diskdrake.rc: change name
-
- * install_steps_auto_install.pm: force exitInstall to be non automatic
-
- * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
- diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
- installs work again
-
- * timezone.pm: Asia/Taipei for Traditional Chinese
-
- * detect_devices.pm: remove debug code
-
-2001/09/07 daouda
-
- * share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07 fcrozat
-
- * share/rpmsrate: Add grio500
-
-2001/09/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
- result).
- fix all Matrox card used with XF4 which really does not like X in frame
- buffer
- (unable to restore frame buffer of DrakX).
-
-2001/09/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
- rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
- * bootloader.pm: use -v for mkinitrd
-
- * share/po/fr.po: "reseaux" and plurals
- misc
-
- * share/rpmsrate: some work on games
-
-2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: cleanup po
-
- * install_steps.pm: s|kdmrc|kdm/kdmrc|
-
- * lang.pm: fix load_mo call
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
- * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
- disable_forced_fsck called for ext3 formatting
- (Type): disable fsck when migrated ext2->ext3
-
- * fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07 siegel
-
- * share/po/de.po: updates
-
-2001/09/07 Till Kamppeter <till@mandrakesoft.com>
-
- * standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
- fitted for auto-install to work
- Optimized program to be much faster
- Many more waiting messages
- Many bugfixes
-
-2001/09/07 daouda
-
- * share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07 fcrozat
-
- * share/rpmsrate: Add grio500
-
-2001/09/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
- result).
- fix all Matrox card used with XF4 which really does not like X in frame
- buffer
- (unable to restore frame buffer of DrakX).
-
-2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * any.pm: Changed simple quote to double quote for a translatable string
- (otherwise
- it isn't seen)
-
- * share/po/es.po: updated Spanish file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
- share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- updated pot file
-
- * share/po/sv.po: updated Swedish file
- updated pot file
-
-2001/09/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: s|kdmrc|kdm/kdmrc|
- remove the "konsole and gnome-terminal are lamers in exotic languages,
- link them to something better"
-
- * bootloader.pm (write_lilo_conf): fix typo
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
- * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
- disable_forced_fsck called for ext3 formatting
- (Type): disable fsck when migrated ext2->ext3
-
- * install_any.pm, keyboard.pm: cleanup
-
- * partition_table.pm, share/list: add xfs
-
- * fs.pm: disable_forced_fsck called for ext3 formatting
-
- * share/rpmsrate: add jfsprogs
-
-2001/09/07 siegel
-
- * share/po/de.po: updates
- updates/fixes
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
- XFree 4.1.0 is not bad, and
- all NVIDIA card are no more considered bad.
-
- * pkgs.pm: fixed retry of package 3 times everytime even if first install
- succeeded, now
- after first successfull install, go to next package to install.
-
- * install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: works now ;p
-
-2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
- corrected lang.pm to have coherence in locale usage (it was the source
- of much of the problems); changed keyboard.pm to ignore charset encoding
- in locale name for locale -> keyboard guessing.
- removed unused gconv modules, converted az.po to utf-8 (as it was the
- only
- remaining az.po on Earth still in a non standard encoding)
-
- * share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
- keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
- locale usage (it was the source
- of much of the problems); changed keyboard.pm to ignore charset encoding
- in locale name for locale -> keyboard guessing.
- removed unused gconv modules, converted az.po to utf-8 (as it was the
- only
- remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: fix keyboard config + some cleanup
- cleanup (use /proc/self instead of /proc/$$)
-
- * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
- keyboard config + some cleanup
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
- XFree 4.1.0 is not bad, and
- all NVIDIA card are no more considered bad.
- avoid using @resolutions_laptop, now use only @resolutions, this means
- 1400x1050
- is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
- (so
- 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
- file).
-
- * install_steps.pm: removed some cards for allowing frame buffer.
- fix log when configuring printer queue.
-
- * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
- cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
- and
- 1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
- * pkgs.pm: fixed retry of package 3 times everytime even if first install
- succeeded, now
- after first successfull install, go to next package to install.
-
- * install_any.pm: update printer data for g_auto_install.
-
-2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: works now ;p
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: fix keyboard config + some cleanup
- cleanup (use /proc/self instead of /proc/$$)
-
- * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
- keyboard config + some cleanup
-
- * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
- type
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
- new mouse test
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: revert previous patch, this is not usable with current rpm as
- it complains if
- one the file has a modified MD5SUM against the header describing it in
- the
- hdlist, so this is most of the time useless.
- guess filename if the file is not found (for an rpm file during
- installation),
- so try with release incremented in such case (good for Cooker user or
- local
- tester using network installation).
-
- * install_steps.pm: fix log when configuring printer queue.
-
- * Xconfigurator.pm: avoid using @resolutions_laptop, now use only
- @resolutions, this means 1400x1050
- is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
- (so
- 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
- file).
-
- * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
- cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
- and
- 1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
- * install_any.pm: update printer data for g_auto_install.
-
- * printerdrake.pm: revert previous commit.
- added a missing ifup lo, on some case (auto_install) it fails.
-
- * printer.pm: start ifup lo before starting service cups.
-
-2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
- fix the use
-
- * diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
- * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
- type
-
- * timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor, standalone/draknet: corrected opeions
-
- * standalone/mousedrake: typo
- updated
-
- * network/tools.pm: corrected initcript
-
- * pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
- pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05 Pixel <pixel@mandrakesoft.com>
-
- * standalone/diskdrake: fix function called
-
-2001/09/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
- config (CUPS), bugfixes, clean-ups.
-
-2001/09/05 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
- pixmaps/wiz_drakgw.png: new icons
-
- * share/themes-mdk.rc: updated theme
-
- * standalone/draknet: interface display corrected
-
- * share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
- * install_gtk.pm: 2 sec without sensitives buttons
-
- * network/netconnect.pm: only if standalone
-
- * pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
- pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
- pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
- pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
- * install_steps.pm: fixed typo preventing removable devices to be seen in
- /etc/fstab.
- fixed configurePrinter (used for auto_install).
-
- * install_steps_interactive.pm: avoid asking when using existing partition
- for magic partition with a real
- mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
- partition is
- not unmountable).
-
- * bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
- lilo.
-
- * fs.pm: fix bad creation of /mnt/hd for an hd installation without
- ramdisk.
- support setting /tmp/hdimage in /etc/fstab even if memory is low (not
- using ramdisk).
-
- * install_any.pm: filtering $o->{printer} for g_auto_install().
- allow installing urpmi on hd install even if low memory (so not using
- ramdisk).
-
- * diskdrake_interactive.pm: Do not use for loopback of magic partition
- (/tmp/hdimage).
-
-2001/09/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated Bosnian file
-
- * share/po/uk.po: updated Ukrainian file
-
-2001/09/05 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: use EISA_ID in more cases to have the name
- non-case dependent EISA comparison
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * Xconfig.pm: fix typos
- non-case dependent EISA comparison
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * modules.pm: favor tmscsim over AM53C974
-
- * tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * standalone/diskdrake: fix function called
-
-2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- Updated Danish file; updated pot file
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix typo
-
-2001/09/04 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
- Fixed bug of spooler change only working when language is English.
-
-2001/09/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * network/netconnect.pm: small english change
-
- * mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
- * share/rpmsrate: tetex-doc
-
- * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- Updated Danish file; updated pot file
-
- * share/po/ja.po: updated Japanese file
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): use "above" instead of "post-install"
-
- * partition_table.pm: re-add JFS
-
- * fsedit.pm, common.pm, bootloader.pm:
- - don't expand symlinks in grub's menu.lst
- - better use of /proc/partitions verification
-
- * detect_devices.pm (getCompaqSmartArray): add yet another location for
- cpqarray location
-
- * fs.pm: fix typo
- mount ext3 as ext2 during install for speed up
-
-2001/09/04 fcrozat
-
- * share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fix bad vga= which go for some install.
-
- * pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): use "above" instead of "post-install"
-
- * fs.pm: mount ext3 as ext2 during install for speed up
-
- * partition_table.pm: re-add JFS
-
- * fsedit.pm, common.pm, bootloader.pm:
- - don't expand symlinks in grub's menu.lst
- - better use of /proc/partitions verification
-
- * detect_devices.pm (getCompaqSmartArray): add yet another location for
- cpqarray location
-
-2001/09/04 yduret
-
- * my_gtk.pm: emebedded mode fix
-
- * interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated Korean file
-
-2001/09/03 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03 yduret
-
- * my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: added timeout in resolv.conf
-
-2001/09/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
- make sure the directory
- is not given for ftp and http install ($dir).
-
- * Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
- * Xconfig.pm: make sure a staling Mouse2 is not present unless it really
- physically exists.
-
-2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add axnet_cs to pcmcia category
-
- * mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
-
- * share/po/ko.po: updated Korean file
-
-2001/09/03 Pixel <pixel@mandrakesoft.com>
-
- * timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
- * fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
- * interactive_gtk.pm: better sizing for combo boxes
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- to propose already formatted
- fat partitions
-
- * share/list: those files disappeared ??
-
- * fs.pm: fix for lvm (non-)creation of devices
- (set_default_options): created
- fix mtab reading and pseudo-device use
-
- * diskdrake.pm (smb_create, nfs_create): make the "New" button work
- (raw_hd_mount_point): fix checking the same mount point
- (try_): fix error displaying
-
- * partition_table.pm: fix switching to 0x85 extended when
- remove_empty_extended is called
-
-2001/09/03 yduret
-
- * standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated bosnian file
- Added Bosnian file
-
-2001/09/01 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid deleting package from %packages in install() when closing
- fd associated,
- if the open is called again (?), it will cause an invalid file (seems to
- happens
- on some invalid file).
-
-2001/08/31 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: corrected yesno interpretation
- libsafe modification
-
- * network/netconnect.pm: corrected profil recording for modem
-
- * standalone/net_monitor: correted typo
-
- * network/ethernet.pm: corrected zero return when cable configuring
-
- * any.pm: corrected autologin : no uc anymore
-
- * network/modem.pm: added domainname2 setting
-
- * share/logo-mandrake.png: new logo
-
-2001/08/31 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added missing AlwaysCore line for second mouse for
- XF3.
-
- * mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
- * standalone.pm: add option --allow-medium-change to force asking question
- even if --auto is
- given on command line of urpmi, for installing package so that a dialog
- appears.
-
-2001/08/31 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
- section
- have "numlock" in INSTALL because it's the only package which goes to
- CD#2
- when you unselect all groups, so having it here will allow not changing
- CD
- with this kind of small install
-
-2001/08/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
- and Spanish files
-
- * share/po/sv.po: updated Swedish file
- updated Ukrainian and Spanish files
-
-2001/08/31 siegel
-
- * share/help_sav.png: not used any more
-
- * share/po/de.po: updates
-
- * share/logo-mandrake2.png, share/logo-mandrake_trans.png,
- share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
- versions => not in use any more
-
-2001/08/31 yduret
-
- * bootlook.pm: updated code
-
-2001/08/30 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: nicer display
-
- * standalone/draknet: added use common.pm (can be usefull, eh?)
-
- * network/network.pm: silently /sbin/ip
- track_network_id only if laptop
-
-2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: Updated Danishfile
- updated pot file (I had lost the group descriptions, sorry, they are
- back now)
- moved chinese files to charset independent names
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
- had lost the group descriptions, sorry, they are back now)
- moved chinese files to charset independent names
-
-2001/08/30 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (read): it works now
-
- * help.pm: fixed (was utf8)
-
- * install_steps_gtk.pm (new): call interactive_gtk::new
-
- * install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
- mouse) before service choice
-
- * pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: corrected icon display
-
- * my_gtk.pm: new wizard
-
- * interactive_gtk.pm: corrected wizard mode display height/width
-
- * standalone/draknet: added draknet client installation
-
- * network/network.pm: track_network_id only if laptop
- dhcp package installation
-
- * pixmaps/wiz_default_left.png: new logo
-
-2001/08/30 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: make sure to update all symlink according to any mouse (max 2)
- probed.
- fix previous fixes on mouse::write_conf
-
- * standalone/mousedrake: fix previous fix (typo).
- keep mouse specific paramater if user does not change its mouse.
- make sure --auto is not interactive on some part.
- use default value for port device if a serial mouse.
-
- * printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
- * Makefile: ugly to make sure standalone/pixmaps is not here when building
- tar-drakxtools.
-
- * Xconfig.pm: when reading existing configuration for mouse, update
- type|name for second mouse too.
- make sure default to set 3 for nbuttons for getinfoFromXF86Config for
- second
- mouse if this mouse has 3 buttons.
-
- * Xconfigurator.pm: for single heads mode, no screen id should be set in
- file (or XFree is going
- mad, but he is right, no ?)
-
- * install_any.pm: if a medium is refused, get rid of it definitively until
- it is accepted again.
-
-2001/08/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: have a wait_message during installation of
- bootloader
-
- * mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
- Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
- Spanish and Vietnamese files
-
-2001/08/30 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: allow LVM on RAID
-
- * help.pm: fixed (was utf8)
-
- * any.pm: cleanup
-
- * pkgs.pm (naughtyServers): update for 8.1
-
- * lang.pm (read): it works now
-
- * fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
- removable
- media
-
- * share/po/Makefile: fix utf8 translation of xml file
-
- * interactive_gtk.pm: fix&cleanup window size
-
- * tools/Makefile: cleanup unneeded stuff
-
-2001/08/30 siegel
-
- * share/po/de.po: new german version
-
-2001/08/30 warly
-
- * share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix language selection
-
- * c.pm: better error message when function c::foo() is missing
-
- * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
- in /)
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed if undef encountered in depslist when installing package
- (traversing
- depslist as $depOrder).
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix language selection
-
- * c.pm: better error message when function c::foo() is missing
-
- * install_steps_gtk.pm (installPackages): have Ok button by default for
- asking for changing CD
-
- * bootloader.pm (mkbootdisk): cleanup
-
- * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
- in /)
-
- * devices.pm: remove fd0H1440 and fd1H1440
-
- * modules.pm: remove "msdos"
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: improved write_conf to enable multi-mice if only once mice is
- already defined.
-
- * standalone/mousedrake: try to merge already existing mouse configuration
- with what has been probed,
- change if mouse is really changed as probe is incomplete.
-
- * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
- * pkgs.pm: fixed if undef encountered in depslist when installing package
- (traversing
- depslist as $depOrder).
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * c.pm: better error message when function c::foo() is missing
-
- * keyboard.pm (loadkeys_files): fixed
-
- * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
- Makefile.config: add localedrake (not tested)
-
- * rescue/make_rescue_img: make it work (do not have the dev in /)
- cleanup, speedup, use mknod for devices
-
- * install_steps_gtk.pm (installPackages): have Ok button by default for
- asking for changing CD
-
- * rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
- * bootloader.pm (mkbootdisk): cleanup
-
- * rescue/dirs: make it work (do not have the dev in /)
-
- * devices.pm: remove fd0H1440 and fd1H1440
-
- * modules.pm: remove "msdos"
-
-2001/08/29 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
- configuration
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: improved write_conf to enable multi-mice if only once mice is
- already defined.
-
- * install_steps.pm: add support for mandatory frame buffer support (SiS
- 630) need them for XF3 to
- work properly, XF4 does work with it nicely.
-
- * Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
- * standalone/mousedrake: try to merge already existing mouse configuration
- with what has been probed,
- change if mouse is really changed as probe is incomplete.
-
- * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: games
-
-2001/08/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
- symlinks device and devfs devices
-
- * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
- Makefile.config: add localedrake (not tested)
-
- * install_steps.pm: no need to have devfs=nomount anymore in root raid
- do not modify fstab options in upgrade
-
- * keyboard.pm (loadkeys_files): fixed
- fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
- * diskdrake_interactive.pm: try to better handle symlinks device and devfs
- devices
- (main): fix
- (Create): fix typo causing primaryOrExtended to be ignored
-
- * rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
- speedup, use mknod for devices
-
- * c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * interactive.pm, install2.pm: corrected icon handling
-
- * services.pm: added cupslpd in printing section
-
-2001/08/28 François Pons <fpons@mandrakesoft.com>
-
- * Makefile.config: really fix typo...
- fixed typo.
-
-2001/08/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: updated Czech file
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove the temporary file /tmp/autoinst.img
-
- * install_steps.pm, install_steps_interactive.pm: propose to format / and
- /usr even if isFormatted. More generally do not trust isFormatted to
- show which partitions to format
-
-2001/08/28 siegel
-
- * ChangeLog, keyboard.pm:
- - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about the
- existence of this variable).
-
-2001/08/28 yduret
-
- * standalone/diskdrake: embedded mode nicer
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28 François Pons <fpons@mandrakesoft.com>
-
- * share/list: added /sbin/e2fsck
-
- * share/aliases: added fsck.ext2 -> e2fsck (now in list file)
- removed e2fsck.shared as e2fsprogs now provide a shared version instead
- of a
- static one.
-
- * Makefile.config: really fix typo...
- fixed typo.
- removed reference to e2fsck.shared (now use e2fsck from package which is
- shared
- since 1.23-2mdk).
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28 siegel
-
- * ChangeLog, keyboard.pm:
- - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about the
- existence of this variable).
-
-2001/08/28 yduret
-
- * standalone/diskdrake: embedded mode nicer
-
-2001/08/28 Stefan Siegel <siegel@mandrakesoft.com>
-
- * keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about
- the existence of this variable).
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: typo
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: default the licence agreement to "Refuse"
-
- * standalone/drakboot: security fix and various
- move to all_hds stuff
-
- * c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28 warly
-
- * share/rpmsrate: move libsafe to SERVER_OTHER 2
- added prelude, libsafe...
-
-2001/08/28 yduret
-
- * standalone/drakxconf: readded dsikdrake
- added new items, remove some old ones
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: corrected hwaddr setting and draknet first window
- display
- corrected typo
-
- * network/netconnect.pm: corrected hwaddr setting and draknet first window
- display
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: corrected hwaddr setting and draknet first window
- display
- corrected typo
-
- * network/netconnect.pm: corrected hwaddr setting and draknet first window
- display
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: nicer help display
-
- * share/keyboards.tar.bz2: fix the rights
-
- * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected bad window size
-
- * network/network.pm: make it compile
- corrected hwaddr stuff
- added HWADDR
-
- * network/tools.pm: corrected internet initscript
-
- * any.pm, mouse.pm: make it compile
- add_devfslink
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
- Added Latvian keyboard
-
- * share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
- * share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: nicer help display
-
- * diskdrake.pm: use empty hash instead of the raid/loopback array
-
- * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected bad window size
-
- * network/network.pm: added HWADDR
-
- * network/tools.pm: corrected internet initscript
-
-2001/08/27 François Pons <fpons@mandrakesoft.com>
-
- * any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
- patch to support CHAP again.
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
- Added Latvian keyboard
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26 warly
-
- * share/rpmsrate: add some important packages
-
-2001/08/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakautoinst: require -> use
-
- * install_any.pm: save the .img file so that multi-cd install won't ask to
- re-enter first cd
-
-2001/08/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile, share/po/.cvsignore: fetch directly the latest
- drakx-help.xml
-
-2001/08/25 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakbug_report: add "rpm -qa"
-
- * bootlook.pm: fix deprecated call standalone::pkgs_install
-
- * diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25 dam's <damien@mandrakesoft.com>
-
- * install2.pm, steps.pm: icon correction
-
-2001/08/25 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): accept mounting iso9660 filesystem as it should be
- (write_fstab): enable mounting more than one swap :)
-
- * bootlook.pm: fix deprecated call standalone::pkgs_install
-
- * install_steps.pm: added the missing security parameter to
- set_default_options
-
- * diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
- pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
- pix
-
- * standalone/mousedrake: updated mouse test
-
-2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
- uncompressing of ramdisk will rulz now
-
- * mdk-stage1/network.c: allow unsetting of automatic mode if not enough
- parameter provided in network steps
-
- * mdk-stage1/probing.c:
- - descr of proc files
- - fix small typo (segfault or not segfault? that's the question)
- enable install from Compaq Smart Array
-
- * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
- than gcc statically
-
- * mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
- Array
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * tools/pcmcia_config.patch: update the patch
-
- * Makefile (test_pms): make perl_checker skip help.pm
- ensure no .orig are generated when the pcmcia patch is applied
-
- * tools/make_mdkinst_stage2: give a little more free space (esp. for
- russian lang)
-
- * lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
- help.pm from xml doc done by doc team
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: bugfix, speedtouch help
-
- * standalone/mousedrake: updated mouse test
-
-2001/08/24 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed possible bug (not sorted partition when calling
- mount_part).
-
- * install_any.pm: fixed hdInstallPath for an hd installation without
- usingRamdisk (not installing
- urpmi in such case).
- updated packages to copy for printerdrake, removed almost obsoletes
- XFree86
- 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
- 3DLabs)
- which means user will have to change CD back to CD#1 if he a such a
- card.
- removed obsolete code for cond_remount and cond_umount and update
- hdInstallPath
- for hd installation.
-
- * diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
- common::useRamdisk().
- take care mount point action is available for the hd installation
- partition only
- if a ramdisk is used (as it can be unmounted).
- use more global isMagicPart instead of isInstallHdPart.
- added real_mntpoint documentation and take care of hd install partition
- for
- available actions.
-
- * fs.pm: take care of using ram disk to remap mntpoint of hd installation
- partition.
- fixed partition never seen as mounted, added special case for
- real_mntpoint to
- remount magic partition on the right place.
-
-2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
- uncompressing of ramdisk will rulz now
-
- * mdk-stage1/automatic.c: revert my auto->interactive patch
-
- * mdk-stage1/network.c: allow unsetting of automatic mode if not enough
- parameter provided in network steps
-
- * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
- than gcc statically
-
- * mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
- install from Compaq Smart Array
-
-2001/08/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
- enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
-
- * tools/pcmcia_config.patch: update the patch
-
- * lang.pm: no need for UTF-8/LC_CTYPE
- (load_mo): if not usingRamdisk, don't try getFile
-
- * diskdrake_interactive.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
- (Done): do not write fstab nor ask about it in install
-
- * fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
- * Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
- * partition_table.pm (write): do not die when real_mntpoint fs fail to
- unmount/remount, just log
- (write): unmount+remount real_mntpoint before doing the kernel_read
-
- * share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
- * pkgs.pm: fix "invalid file"
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: speedtouch configuration
-
- * my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
- * pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
- added new mouse pixmap for mousedrake
-
- * network/adsl.pm: bugfix, speedtouch help
- added aliases for speedtouch stuff
- speedtouch configuration
- removed adsl detectioin, once again.
-
- * standalone/mousedrake: no absolute pixmap reference
- new mousedrake. experimental
-
- * network/tools.pm: speedtouch configuration
- export write_initscript, correct initscript.
-
-2001/08/24 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed possible bug (not sorted partition when calling
- mount_part).
-
- * diskdrake_interactive.pm: take care mount point action is available for
- the hd installation partition only
- if a ramdisk is used (as it can be unmounted).
- use more global isMagicPart instead of isInstallHdPart.
- added real_mntpoint documentation and take care of hd install partition
- for
- available actions.
-
- * install_any.pm: fixed hdInstallPath for an hd installation without
- usingRamdisk (not installing
- urpmi in such case).
- updated packages to copy for printerdrake, removed almost obsoletes
- XFree86
- 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
- 3DLabs)
- which means user will have to change CD back to CD#1 if he a such a
- card.
- removed obsolete code for cond_remount and cond_umount and update
- hdInstallPath
- for hd installation.
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
- mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
- and updated documentation.
-
- * fs.pm: take care of using ram disk to remap mntpoint of hd installation
- partition.
- fixed partition never seen as mounted, added special case for
- real_mntpoint to
- remount magic partition on the right place.
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (write): do not die when real_mntpoint fs fail to
- unmount/remount, just log
- (write): unmount+remount real_mntpoint before doing the kernel_read
-
- * install_steps.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
-
- * diskdrake_interactive.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
- (Done): do not write fstab nor ask about it in install
-
- * lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
- * fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24 siegel
-
- * share/po/de.po: New & shiny german version
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
- * share/po/el.po: updated Greek file
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/23 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: at_boot connection,resolvconf in profiles
-
- * standalone/draksec: addedlibsafe option
-
- * network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: removed unusefull greping when building package
- tree.
-
-2001/08/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: work on GAMES section
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/lv.po: updated Latvian file
-
-2001/08/23 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
- using ramdisk
- (disable_user_view): damned kdmrc moved
-
- * diskdrake_interactive.pm: cancel at startup will now exit
- ask wether to save fstab
- (part_possible_actions): have "Mount point" first to please fpons
-
- * fs.pm: keep the freq&passno of /etc/fstab
-
- * tools/i386/netboot/menu.lst.example,
- tools/i386/netboot/make_boot_network,
- tools/i386/netboot/automatic.para.default: as we now have
- menu.lst.example, i remove automatic.para for more flexibility
-
- * lang.pm: fix locale support when usingRamdisk
-
-2001/08/22 anoncvs
-
- * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
- <dxiaoming@mandrakesoft.com>
- Updated chinese (simplied) translation.
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
- * network/nfs.pm: pleac perl_checker
-
- * interactive_gtk.pm: more intelligent setting back the selected value in
- the clist and ctree
- (done already for entry)
- - fix entries editing causing the cursor to go to the end of line
- - select the text
-
- * c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
- otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22 anoncvs
-
- * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
- <dxiaoming@mandrakesoft.com>
- Updated chinese (simplied) translation.
-
-2001/08/22 fabman
-
- * share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
- entries are not given
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
- mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
- mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
- but ramdisk Read Only
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
- * bootlook.pm: fix typo
-
- * network/nfs.pm: pleac perl_checker
-
- * install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
- and rpmlib tries to write in it and ...
- do not call configurePrinter if no printer is wanted
-
- * interactive_gtk.pm: more intelligent setting back the selected value in
- the clist and ctree
- (done already for entry)
- - fix entries editing causing the cursor to go to the end of line
- - select the text
-
- * c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
- closed and rpmlib tries to write in it and ...
-
-2001/08/22 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: fixed int and float checking which should accept
- negative number (added explicit
- positive too), cleaned code for some perl idioms.
-
- * install_steps.pm: updated configurePrinter to use foomatic printer
- configuration.
-
-2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
- entries are not given
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
- mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
- mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
- but ramdisk Read Only
-
-2001/08/22 kjx
-
- * share/po/zh_CN.GB2312.po: review
- review
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * bootlook.pm: fix typo
-
- * install_steps_auto_install.pm: don't have formatPartitions interactive
- by default
-
- * install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22 siegel
-
- * share/po/de.po: new german version
-
-2001/08/21 dam's <damien@mandrakesoft.com>
-
- * Makefile: added rpcinfo to the tar
- corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
- * standalone/draknet: ergonomy correction
-
- * network/tools.pm: corrected qq bug
- corrected bug
-
- * standalone/net_monitor: log updatede
- removed memoty leak
- time connection label
-
-2001/08/21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: moved installation code of foomatic (only)
- if a printer may be chosen.
-
- * install_any.pm: fixed hd installation for urpmi.
-
- * printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2001/08/21 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
- * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
- install
-
- * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
- * fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
- * install_any.pm: cleanup
-
- * install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21 siegel
-
- * share/po/de.po: new german version
-
-2001/08/21 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: removed memoty leak
- time connection label
-
- * network/tools.pm, network/modem.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
- the children again
-
- * network/adsl.pm: speedtouch config
- generik internet initscript, planq the children again
-
-2001/08/21 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21 kjx
-
- * share/po/zh_CN.GB2312.po: review
-
-2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix spelling error
-
- * install_any.pm: cleanup
- install hotplug if usb (i kept usbd just in case)
-
- * diskdrake_interactive.pm (Create): force no sorting on filesystems,
- editable mount points
-
- * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
- install
-
- * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
- * install_steps_interactive.pm: fix '$' in i18n message
-
- * fs.pm (read_fstab): don't expand symlink if the link goes in a directory
- umask=0 only if security level < 3
-
-2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
- nowhere)
-
-2001/08/20 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: basic nfs handling in drakx
- fix bug 4257
-
- * detect_devices.pm (raidAutoStart): fix for when kmod is there
-
- * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
- with devfs
-
- * diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
- to umount /tmp/hdimage only when needed
-
- * Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
- tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
- drakx
-
-2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
- nowhere)
-
-2001/08/20 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
- of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
- * detect_devices.pm (raidAutoStart): fix for when kmod is there
-
- * diskdrake.pm: remove test code
-
- * fs.pm: fix bug 4257
-
- * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
- with devfs
-
- * install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
- to umount /tmp/hdimage only when needed
-
- * interactive_gtk.pm (wait_message_nextW): fix previous text == new text
- causing no
- expose_event causing dead loop
-
-2001/08/19 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: save fstab on exit
-
- * fsedit.pm: various typos fix
-
- * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- make the devfs= mount or nomount choice based on raid-based root work
-
- * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- fix diskdrake requiring gtk
- add some test code
-
- * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
- removed unless we're in ramdisk
- various typos fix
-
- * install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
- lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
-
-2001/08/19 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: major fs.pm rework + adaptation to it
- don't show nfs/smb/removable in install
- basic smb handling
-
- * network/smb.pm: basic smb handling
-
- * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- make the devfs= mount or nomount choice based on raid-based root work
- disable supermount for the moment
- major fs.pm rework + adaptation to it
-
- * install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
- usingRamdisk, ensure no files are removed unless we're in ramdisk
- simplify
-
- * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- fix diskdrake requiring gtk
- add some test code
- major fs.pm rework + adaptation to it
-
- * install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
- are removed unless we're in ramdisk
- major fs.pm rework + adaptation to it
-
- * partition_table.pm: remove JFS from @important_types (too broken for the
- moment)
- remove isSupermount (was unused)
-
- * common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
- usingRamdisk, ensure no files are removed unless we're in ramdisk
-
- * interactive_gtk.pm (create_ctree): fix focusing (the assumption number
- of leaves = number of lines is dumb)
-
- * fsedit.pm: various typos fix
- major fs.pm rework + adaptation to it
-
- * bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
- * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
- removed unless we're in ramdisk
- various typos fix
- major fs.pm rework + adaptation to it
- cleanup
- basic smb handling
-
- * diskdrake_interactive.pm: save fstab on exit
- major fs.pm rework + adaptation to it
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: basic nfs/smb handling in diskdrake
- fixes and function prototype removing
-
- * diskdrake.pm: basic nfs/smb handling in diskdrake
- nicer mount options code (for autofs and supermount)
-
- * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
- * interactive_gtk.pm: fix bug in box's height use
-
- * partition_table.pm, any.pm: fixes and function prototype removing
-
- * interactive.pm: readd the sorting based on size when no sorting is
- precised
-
- * my_gtk.pm (n_line_size): bigger spacing for 'various'
-
- * standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
- handling in diskdrake
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (n_line_size): bigger spacing for 'various'
- enhance look, fix ask_fileW
-
- * fs.pm: basic nfs/smb handling in diskdrake
- fixes and function prototype removing
- (write_fstab): add notail for reiserfs partitions in any case
- cleanup mounting options parsing
-
- * diskdrake.pm: basic nfs/smb handling in diskdrake
- nicer mount options code (for autofs and supermount)
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
- cleanup mounting options parsing
-
- * raid.pm: update the raid size as it should be
-
- * diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
- less verbose resize_reiserfs
- update the raid size as it should be
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * fsedit.pm: basic nfs/smb handling in diskdrake
- update the raid size as it should be
-
- * network/tools.pm: fix typo
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * partition_table.pm: fixes and function prototype removing
-
- * install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
- install_interactive.pm, network/ethernet.pm, interactive_http.pm,
- printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
- network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
- of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
- in ask_from_
-
- * standalone/diskdrake: basic nfs/smb handling in diskdrake
-
- * any.pm: fixes and function prototype removing
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * interactive_gtk.pm: fix bug in box's height use
- better radiobox keyboard handling
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
- enhance look, fix ask_fileW
-
- * interactive.pm: readd the sorting based on size when no sorting is
- precised
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
- do not use devfs with root software raid
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
- $all_hds
-
-2001/08/18 siegel
-
- * share/po/de.po: new german version
-
- * standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
- network/network.pm, raid.pm: fixed i18n
-
- * printerdrake.pm: i18n fixes
-
-2001/08/17 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
- * standalone/interactive_http/interactive_http.cgi: fix typo
- restrict the progs callable to a few one.
-
- * standalone/interactive_http/index.html.pl,
- standalone/interactive_http/index.html: autogenerate index.html
-
- * fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
- (with IA-like stripping of unused options)
-
- * c/stuff.xs.pm: is_ext3 is needed in standalone
- Xtest not needed in standalone
-
- * c/Makefile.PL: is_ext3 is needed in standalone
-
- * standalone/interactive_http/miniserv.init,
- standalone/interactive_http/Makefile: restrict the progs callable to a
- few one.
-
- * Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
- * modules.pm: move back sunhme in sparc only
-
-2001/08/17 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
- * interactive.pm, install2.pm: removed no_incon
-
- * standalone/net_monitor: added no internet connection configured label on
- button
-
- * network/netconnect.pm, network/ethernet.pm: corrected connection script
- creation
-
-2001/08/17 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: use diskdrake_interactive instead of diskdrake
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
- unused options)
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
- standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
- any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
- lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * diskdrake_interactive.pm: add mount options choice (with IA-like
- stripping of unused options)
- (part_possible_actions): have possible actions sorted the way we want
- (Type): fix ext2->ext3 detection
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * modules.pm: move back sunhme in sparc only
-
-2001/08/17 Till Kamppeter <till@mandrakesoft.com>
-
- * share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
- section.
-
-2001/08/17 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
- remove shapecfg and gpa
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of CUPS not being installed during
- installation
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, install_any.pm: add remove_unused to have more place for mo
- files
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of CUPS not being installed during
- installation
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: add remove_unused to have more place for mo files
- (getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
- unmounting at end of install to fail
-
- * install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated French file
-
- * share/po/sk.po: updated Slovak file
-
- * lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
- which caused the
- unmounting at end of install to fail
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
- add kernel in INSTALL
- s/DrakConf/drakconf/
-
-2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
- Italian and Korean files
-
- * share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
- Serbian files
-
-2001/08/15 Pixel <pixel@mandrakesoft.com>
-
- * standalone/diskdrake: oops reverting modifs commited by error
- fix XkbOptions handling
-
- * standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Let the "Options" button only appear when
- the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
- files
-
- * share/po/es.po: updated spanish and Indonesian files
-
- * share/po/id.po: updated Indonesian, Italian and Korean files
- updated spanish and Indonesian files
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: added options
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: oops, fix type of installing X or not
- - fix choice of packages when auto install
-
- * Makefile.config: add drakautoinst in drakxtools standalone binaries
-
- * install_steps_interactive.pm, install2.pm:
- - fix createBootdisk with auto
- - fix setupBootloader with auto
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * install_steps.pm, network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
-2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
- * interactive_gtk.pm, interactive.pm:
- - small fixes (esp. gtk sensitive handling)
- - add ask_file
- - add "gtk" preference field
-
- * my_gtk.pm: remove ask_file (was unused)
-
- * http.pm: cleanup to please perl_checker
-
- * Makefile (TAGS): add MDK/Common files
-
- * services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected activation button
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: oops, fix type of installing X or not
- - fix choice of packages when auto install
-
- * Makefile.config: add drakautoinst in drakxtools standalone binaries
-
- * install_steps_interactive.pm, install2.pm:
- - fix createBootdisk with auto
- - fix setupBootloader with auto
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * install_steps.pm, network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
-2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix typo?
-
-2001/08/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Transfer queues non-interactively when switching
- between LPD and LPRng.
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected activation button
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm,
- network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
- * install_any.pm:
- - fix choice of packages when auto install
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix typo?
-
-2001/08/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Removed superfluous lines.
-
- * printerdrake.pm: Transfer queues non-interactively when switching
- between LPD and LPRng.
- Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
- Removing old version of eepro100 (no stage1).
-
- * tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: corrected 'no icon'
-
- * network/adsl.pm, network/netconnect.pm: adsl autodetection activated
- (planq the children)
-
-2001/08/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
- than from ..
- initial revision for drakautoinst
- - put %installSteps in a separate package (steps.pm) (for drakxtools)
- - use additional fields {auto} and {noauto}, by step, to ease
- interactive auto install and oem stuff
- - in install2.pm, perform each step either from the interactive class
- or from install_steps, according to the {auto} flag
- - id, tell each step to not try to be automatic if {noauto}
- - in the install, have auto install bootdisk created in install_any so
- we can always write a bootdisk (from install_steps) for further use from
- drakautoinst in standalone
- - interactive version of install_steps_auto_install is now inheriting
- from the interactive class, so we can click on a previous automatic step
- and have it interactively during an interactive auto install
-
- * install_steps.pm, install_steps_interactive.pm,
- install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
- initial revision for drakautoinst
- - put %installSteps in a separate package (steps.pm) (for drakxtools)
- - use additional fields {auto} and {noauto}, by step, to ease
- interactive auto install and oem stuff
- - in install2.pm, perform each step either from the interactive class
- or from install_steps, according to the {auto} flag
- - id, tell each step to not try to be automatic if {noauto}
- - in the install, have auto install bootdisk created in install_any so
- we can always write a bootdisk (from install_steps) for further use from
- drakautoinst in standalone
- - interactive version of install_steps_auto_install is now inheriting
- from the interactive class, so we can click on a previous automatic step
- and have it interactively during an interactive auto install
-
-2001/08/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
- auto_inst enhancements
-
- * install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
- Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
- * devices.pm: add /dev/hd[mt] handling
-
-2001/08/13 siegel
-
- * share/po/de.po: new german version
-
-2001/08/13 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Automatic transfer of queues when changing the spooler.
- Update printer queue list when exiting during install, so that the
- "Summary" entry is correct.
- When one sayd "No" on the test page, the modify dialog was not pointing
- to the current printer
-
- * printer.pm: Automatic transfer of queues when changing the spooler.
- The photo test page was not printed during installation.
-
- * interactive.pm: Tree lists are sorted again now.
-
-2001/08/13 yduret
-
- * standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: longer timeout
-
-2001/08/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix ortograf typo
-
-2001/08/12 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: po->mo is no longer gonna be nasty with us
-
- * interactive_gtk.pm: clean the nice till fix
-
- * tools/cvslog2changelog.pl: add till
-
- * Makefile: ensure locales.tar.bz2 in perl-install/share is build
- po->mo is no longer gonna be nasty with us
-
-2001/08/12 Till Kamppeter <till@mandrakesoft.com>
-
- * interactive.pm: Lists get only sorted when the "sort" option is given.
-
- * printer.pm, printerdrake.pm: Check files before checking RPM database =>
- Acceleration, waiting windows
-
-2001/08/11 dam's <damien@mandrakesoft.com>
-
- * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
- share/themes/mdk-bg.png: new theme for beta
-
- * share/theme-editor.pl: updated
- now works.
-
-2001/08/11 tkamppeter
-
- * printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10 dam's <damien@mandrakesoft.com>
-
- * share/theme-editor.pl: added theme editor
-
- * network/tools.pm: corrected password file substitution
-
- * network/ethernet.pm: remove Data::Dumper
-
- * network/netconnect.pm: added spped and timeout handling for isdn
-
- * any.pm: corrected autologin question
-
- * network/isdn.pm: tomeout option deactivated.
-
- * standalone/draknet: corrected internet cnfiguration pop up, and some
- other studds
- ifup/down ethx, anew pixmap for list
-
- * my_gtk.pm: removed Datta::Dump use
-
- * pixmaps/eth_card_mini2.png: added
-
-2001/08/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: small font fix
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * share/po/bg.po: updated Bulgarian file
- updated pot file
-
-2001/08/10 yduret
-
- * bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: added missing use
- added pixmap for eth. Some factorisation
-
- * network/tools.pm: added useless function type2interface for future use
-
- * my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
- standalone mode.
-
- * network/isdn.pm: labels corrections
-
-2001/08/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
- standalone/drakxservices, standalone/net_monitor, standalone/draknet,
- standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
- standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
- standalone/drakboot, standalone/draksec: use vnew the right way
- everywhere
-
- * standalone/drakgw: use vnew the right way everywhere
- - if package installs fail, redo one by one to know which one failed
- - try to not end up with a failing configuration file, if program is
- brutally stopped
- - if unrecognized config file, don't fail, rather ignore it and
- proceed
- - run dhcpd_update feature (if present) after setup of dhcp server
-
- * share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09 Pixel <pixel@mandrakesoft.com>
-
- * standalone.pm, install_any.pm: rename interactive_pkgs in
- pkgs_interactive
-
-2001/08/09 siegel
-
- * standalone/interactive_http/miniserv.logrotate,
- standalone/interactive_http/Makefile: Added logrotate for
- "/var/log/drakxtools_http.log"
-
-2001/08/09 tkamppeter
-
- * printer.pm, printerdrake.pm: New structure for queue modification,
- general structure clean-up
-
-2001/08/09 yduret
-
- * bootlook.pm: readded in->do_pkg->install (i sux)
- rewrite in a more drakx fashion
-
- * my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: typo
- makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
- * Makefile: skip module CGI in test_pms (perl_checker)
-
- * fsedit.pm (check_mntpoint): remove /root from directories that "should
- remain within the root filesystem"
-
- * proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
- printerdrake.pm, standalone/drakgw, standalone/draknet,
- network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
- standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
- network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
- interactive_pkgs stuff
-
- * install_steps_interactive.pm: installing foomatic before doing anything
- about printer
- add interactive_pkgs stuff
-
- * Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
- * install_any.pm (remove, remove_nodeps): fix typo
- makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
-2001/08/08 tkamppeter
-
- * install_steps_interactive.pm: Installation fitted to new printerdrake
-
- * printer.pm: Different choosable test pages available now
- Corrected init script calls in the (start|stop|restart)_service
- functions
-
- * printerdrake.pm: Different choosable test pages available now
- Removed superfluous line in install_spooler function
-
-2001/08/08 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: nex features
-
- * network/netconnect.pm: removed debugging message
-
- * network/isdn.pm: corrected pkgs use -> require
-
- * my_gtk.pm: added gtkset_relief
-
- * pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07 Pixel <pixel@mandrakesoft.com>
-
- * pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
- removing for re-adding with -kb
-
-2001/08/07 tkamppeter
-
- * printer.pm, printerdrake.pm: Automatic installation of all needed
- packages
-
-2001/08/07 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected label
-
- * network/netconnect.pm: removed debugging message
-
- * standalone/net_monitor: nex features
- added color choice
- lot of improvments
-
- * network/isdn.pm: corrected pkgs use -> require
-
- * my_gtk.pm: added gtkset_relief
-
- * pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c: say that it's a data read error, when we can't load
- the ramdisk
-
- * mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
- wide bzlib.h but our own provided one
-
-2001/08/07 Pixel <pixel@mandrakesoft.com>
-
- * rescue/tree/etc/issue: fix distrib number
-
- * interactive.pm: adding http feature, mainly for standalone tools
-
- * standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
- import
-
- * standalone/interactive_http/miniserv.pl: add interactive_http
- Initial revision
-
- * resize_fat/main.pm: fix
-
- * partition_table.pm: nicer names for journalised fs
-
- * Makefile.drakxtools, standalone/interactive_http/miniserv.init,
- standalone/interactive_http/index.html,
- standalone/interactive_http/interactive_http.cgi,
- standalone/interactive_http/miniserv.conf,
- standalone/interactive_http/miniserv.pam,
- standalone/interactive_http/miniserv.users, Makefile,
- standalone/interactive_http/Makefile: add interactive_http
-
- * interactive_http.pm, standalone/interactive_http.cgi: add
- interactive_http
- adding http feature, mainly for standalone tools
-
- * share/diskdrake.rc: have every journalised in darkred
-
- * c/stuff.xs.pm: add S_IFIFO
-
- * standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: debugging, profile coding, isdn 128 debugging
- corrected gtkradio : shift instead of pop
-
- * interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
- instead of pop
-
- * network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
- profile coding, isdn 128 debugging
-
-2001/08/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
- * share/po/vi.po: updated Vietnamese file
-
-2001/08/06 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: kernel_arch removed
-
- * fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
- * interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
- defined in interactive
-
-2001/08/06 yduret
-
- * tinyfirewall.pm: use MDK::Common;
- use network::netconnect;
-
- * standalone/drakgw: use MDK::Common;
- use network::netconnect; and update functions call from netconnect
-
-2001/08/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eo.po: updated Esperanto file
-
-2001/08/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: switch to gtk install when
- interactiveSteps is defined
-
-2001/08/05 tkamppeter
-
- * printer.pm, printerdrake.pm: Automatic installation and start of the
- desired printer spooler
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * share/list: add tune2fs enabling switching from ext2 to ext3
-
- * fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
- * diskdrake.pm: add ext3 support
- (Type): handle lossless switch from ext2 to ext3
-
- * pkgs.pm: make perl_checker happy
-
- * c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
- * common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): simplify, fix
- setSelectedFromCompssList not called in
- expert even the first_time (especially nasty for auto_installs)
-
- * fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
- * diskdrake.pm: add ext3 support
- (Type): handle lossless switch from ext2 to ext3
-
- * install_steps_gtk.pm: add the feather feature, but do not enable it
-
- * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
- (wait_msg doesn't
- exist anywhere, it must be a fpons typo)
-
- * pkgs.pm: make perl_checker happy
-
- * c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
- * bootloader.pm: as when lilo is selected, we don't try to install grub,
- just create the
- config file in case it may be useful
-
- * common.pm: moved arch() and alike to MDK::Common::System
-
- * partition_table_raw.pm: add yaboot detection
-
- * install_any.pm, share/rpmsrate: create a new flags "X" selected by
- default, contain what X related packages
- which were in "SYSTEM"
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): simplify, fix
- setSelectedFromCompssList not called in
- expert even the first_time (especially nasty for auto_installs)
-
- * install_steps_gtk.pm: add the feather feature, but do not enable it
-
- * bootloader.pm: as when lilo is selected, we don't try to install grub,
- just create the
- config file in case it may be useful
-
- * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
- (wait_msg doesn't
- exist anywhere, it must be a fpons typo)
-
- * share/rpmsrate, install_any.pm: create a new flags "X" selected by
- default, contain what X related packages
- which were in "SYSTEM"
-
-2001/08/03 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor, network/tools.pm, network/netconnect.pm,
- network/isdn.pm: debugging, 128Kb/s ISDN
-
- * Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: typo fix
- replace isJfs/isXfs/... with isThisFs("jfs"
-
- * install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
- update_userkderc is now called update_gnomekderc
-
- * Makefile: better po skipping
-
- * commands.pm (sync): (re-?)add
-
- * fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
- replace isJfs/isXfs/... with isThisFs("jfs"
-
- * fsedit.pm (check_mntpoint): /root should remain within the root
- filesystem
-
- * install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
- update_userkderc is now called update_gnomekderc
-
-2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c:
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
- * mdk-stage1/doc/TECH-INFOS:
- - small update
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, services.pm, install_interactive.pm,
- network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
- testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
- is in ISA of the object
-
- * partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c:
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
- * mdk-stage1/doc/TECH-INFOS:
- - small update
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: instead of testing if ref($in) or ref($o) contains
- /gtk/, test if interactive_gtk is in ISA of the object
- add jfs support
-
- * install_steps_interactive.pm, services.pm, install_interactive.pm,
- network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
- or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
- object
-
- * partition_table.pm: JFS support
- add jfs support
-
- * fsedit.pm, diskdrake.pm: JFS support
-
- * tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
- * fs.pm, share/list: add jfs support
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
- * fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: write_on_text writes in blue instead of black
-
- * network/isdn.pm: typo
- added de-installation before installateion
-
- * network/netconnect.pm: translation correction
-
-2001/08/01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm: handle auto_allocate_raids for
- auto_installs
-
- * raid.pm (new): now works with a list of partitions
-
-2001/08/01 tkamppeter
-
- * printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
- overview.
-
-2001/08/01 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: write_on_text writes in blue instead of black
-
- * network/isdn.pm: typo
- added de-installation before installateion
-
- * network/netconnect.pm: translation correction
-
-2001/08/01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm: handle auto_allocate_raids for
- auto_installs
-
- * raid.pm (new): now works with a list of partitions
-
-2001/07/31 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: added splash screen between different
- configurations. Added splash wizard mode
- added intro step for each configuration type.
-
- * network/tools.pm: corrected ask_connect_now
-
- * my_gtk.pm: added write_on pixmap : a function to write text on pixma,
- using fonts.
-
- * network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: after copying the auto install floppy,
- sync in case you shall remove the
- floppy right after the LED switches off yet the kernel decides to not
- flush
- everything
-
- * modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
- installs
-
- * bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
- so..)
-
-2001/07/31 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (translate): empty string translation is an empty string
-
- * install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
- * share/rpmsrate: add cpio
- lower gurpmi (5->4)
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
- support
- better handling of locales
-
- * Makefile.drakxtools (install): s/cp -rf/cp -rfL/ (-L = --dereference,
- aka always follow symbolic links)
-
- * install_steps_gtk.pm (installPackages): make $show_advertising a global
- state (for Vincent Meyer)
-
- * share/Makefile, Makefile: better handling of locales
-
- * install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: added cable internet connection selection
- added internet connection selection in case of multiple configurations
-
- * network/netconnect.pm: corrected ask_connect_now behaviour
- corrected ask_connect_now
- debug
- added internet connection selection in case of multiple configurations
-
- * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
- corrected ask_connect_now
- added internet connection selection in case of multiple configurations
-
-2001/07/30 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
- hdlist files"
- occurs when the hdlists are in fact not available
-
- * share/locales.tar.bz2.ppc, share/locales.tar.bz2,
- share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
- share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
- based on installed glibc
-
- * printer.pm, printerdrake.pm: use MDK::Common
- i wonder why it was included and Till used an older version without
- merging?
-
- * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
- yet)
-
- * share/rpmsrate: raise rxvt (4->5)
- lower rpmdrake & harddrake (5->4)
- remove rootfiles (unneeded)
-
- * Makefile: use -excludeMDK::Common::Globals for perl_checker
- automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30 tkamppeter
-
- * printer.pm, printerdrake.pm: In beginners mode one chooses only the
- printer, not the driver (default driver)
-
-2001/07/30 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: debug
- added internet connection selection in case of multiple configurations
-
- * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
- added internet connection selection in case of multiple configurations
-
- * network/ethernet.pm: added cable internet connection selection
- added internet connection selection in case of multiple configurations
-
-2001/07/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
- have a memory limit also for Rescue (different one)
-
-2001/07/30 Pixel <pixel@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: use MDK::Common
- i wonder why it was included and Till used an older version without
- merging?
-
- * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
- yet)
-
- * share/rpmsrate: raise rxvt (4->5)
- lower rpmdrake & harddrake (5->4)
- remove rootfiles (unneeded)
-
- * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
- hdlist files"
- occurs when the hdlists are in fact not available
-
- * Makefile: use -excludeMDK::Common::Globals for perl_checker
- automatic handling of locales.tar.bz2 based on installed glibc
-
- * share/locales.tar.bz2.ppc, share/locales.tar.bz2,
- share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
- share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
- based on installed glibc
-
-2001/07/28 tkamppeter
-
- * printer.pm, printerdrake.pm: Support for PPD files of PostScript
- printers (when CUPS is used)
-
-2001/07/27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
- is seen as a package.
-
- * interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
- cancel (previously always 1).
- added a before leaving code to clean added reference (else it seems to
- bahave
- strangely on changing steps).
- fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
- * services.pm: allow cancel on services which do not change anything.
-
- * install_steps_interactive.pm: changed warn dialog to okcancel dialog
- when asking user to insert Boot floppy
- used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27 gbeauchesne
-
- * install_steps_gtk.pm:
- - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
- for
- XFree86.log
-
-2001/07/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: allow to escape from Update Modules if you don't
- want to insert an ext2 floppy
- Disk -> Floppy for Update Modules disk
-
-2001/07/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
- Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27 tkamppeter
-
- * standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
- changed to use Foomatic, driver options, spooler change
-
-2001/07/26 dam's <damien@mandrakesoft.com>
-
- * network/isdn.pm: added firmware loading/configuration
- not loading the module at detection.
-
- * standalone/draknet: MDK::common correction
-
- * modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26 fcrozat
-
- * share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: added blank and updatemodules options to DrakX.
-
- * bootloader.pm: added prioritary kernel entry 'default' as the kernel
- typically copied from a
- modified blank.img file with a kernel (no initrd.img necessary to
- build).
- This kernel takes precedance over any other kernel.
-
- * install_steps_interactive.pm: really fixes Diskette with Floppy.
- fix typo as Diskette to Floppy.
- add support for new modules load as described by GG.
-
- * install_steps.pm: fixed some silly typo and tiny bugs.
- fixed typo as Diskette to Floppy.
- add support for modified blank.img floppy and Update Modules floppy.
- In first case copy kernel to /boot/vmlinuz-default to be taken into
- account by
- bootloader suggestion method.
- In second case, check installed kernel and update any modules listed in
- the
- Update Modules floppy.
-
-2001/07/26 gbeauchesne
-
- * bootloader.pm:
- - Don't set "lba32" on ia64
-
-2001/07/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
- "--blank" to DrakX when module loading is disabled
- - add "changedisk" feature
- - add "updatemodules" feature
-
- * mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h:
- - add "changedisk" feature
- - add "updatemodules" feature
-
- * mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: fixed new network organization
-
- * standalone/net_monitor: updated. Profile handling.
-
- * network/isdn_consts.pm: updated ISDN detection. Added firmware handling
- and drivers other than hisax
-
-2001/07/25 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed no test (or die test) to void package read on depslist
- (allowed to keep
- package indexing good on multi-arch).
- cleaned code to examine depslist.ordered and packages list.
-
- * rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
- * tools/syncrpms: fixed still missing rpmtools:: before a version_compare
- ...
-
-2001/07/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: small typo
-
- * mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile (install): build mo's
-
- * commands: move to MDK::Common, bool->to_bool
-
- * common.pm: do not export sync, keep it in common (esp. so that it
- doesn't conflict with my_gtk::sync
- (removeXiBSuffix): add TB (tera)
-
- * share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
- * share/verify_modules.pl: new common syntax
-
- * Makefile:
- - temporary hack to have at least good UTF-8 based locales (otherwise
- rpmlib segfaults)
- - touch share/po/*.po, so that they are not rebuilded (pablo takes
- care of them)
-
- * share/list: add MDK::Common::Globals
-
- * partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
- install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
- export sync, keep it in common (esp. so that it doesn't conflict with
- my_gtk::sync
-
-2001/07/25 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: add decriptions for integrated Apple
- Network/SCSI hardware
-
-2001/07/24 dam's <damien@mandrakesoft.com>
-
- * network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
- corrected speed fax + PCI, updated configuration
-
-2001/07/24 daouda
-
- * bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm: move to MDK::Common, bool->to_bool
- fix syntax
- removed/renamed unused/seldom-used functions
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * swap.pm: temporary hack to have at least good UTF-8 based locales
- (otherwise rpmlib segfaults)
- move to MDK::Common, bool->to_bool
-
- * unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
- functional alternative to chomp (and works on lists)
-
- * globals.pm, perl2fcalls:
- - globals is now MDK::Common::Globals
- - perl2fcalls is now /usr/bin/perl_checker
-
- * install_steps_gtk.pm: move to MDK::Common, bool->to_bool
- move to MDK::Common, bool->to_bool
- removed/renamed unused/seldom-used functions
-
- * common.pm: move to MDK::Common, bool->to_bool
- cleanup (remove unused stuff and dangerous prototypes)
- removed/renamed unused/seldom-used functions
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * network/tools.pm, network/adsl.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm, network/modem.pm:
- - globals is now MDK::Common::Globals
- - perl2fcalls is now /usr/bin/perl_checker
- move to MDK::Common, bool->to_bool
-
- * partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
- standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
- partition_table_mac.pm, standalone/mousedrake, devices.pm,
- install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
- install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
- standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
- interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
- network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
- resize_fat/directory.pm, standalone/net_monitor,
- install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
- lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
- standalone/drakxconf, resize_fat/info_sector.pm,
- standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
- partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
- Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
- standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
- interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
- bootloader.pm: move to MDK::Common, bool->to_bool
-
- * services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
- removed/renamed unused/seldom-used functions
-
- * standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
- detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * Makefile: temporary hack to have at least good UTF-8 based locales
- (otherwise rpmlib segfaults)
- move to MDK::Common, bool->to_bool
- move to MDK::Common, bool->to_bool
-
-2001/07/23 dam's <damien@mandrakesoft.com>
-
- * modules.pm, network/tools.pm, network/isdn_consts.pm,
- network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
- Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: cleanup
-
- * c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
- tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
- share/po/.cvsignore: do not use the po's directly. Use mo's through
- gettext
-
-2001/07/22 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/isdn.pm: updated isdn config, moved
- isdn_data from netconnect_const to isdn_const
- big work on isdn. Not finished
-
- * modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
- big work on isdn. Not finished
-
- * network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
- config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20 François Pons <fpons@mandrakesoft.com>
-
- * docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/el.po: updated Greek file
-
-2001/07/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
- * lang.pm: fix
- (load_po): enhance readability
-
- * share/po/fake_c.pl: cleanup
- externalize the pm 2 pm_.c in fake_c.pl
-
- * common.pm (translate): basic plural forms handling (not finished)
-
- * help.pm: fix missing ``"''
-
- * bootloader.pm: fix
- (install_lilo): order fat partitions first
-
-2001/07/19 dam's <damien@mandrakesoft.com>
-
- * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
- share/help.png: new color
-
- * network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
- graphic logo for 8.1
-
-2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
- share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
- share/po/eu.po: updated Croatian file
-
-2001/07/19 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
- graphic logo for 8.1
-
- * Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
- share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
- share/po/eu.po: updated Croatian file
-
-2001/07/19 Pixel <pixel@mandrakesoft.com>
-
- * globals.pm: no strict 'refs' instead of 'vars'
-
- * services.pm: rename ask_install_gtk in ask_install, ask_install is now
- ask_install_simple (obsolete)
-
- * install_steps_auto_install.pm: fix exit install in graphical
- auto_install's
-
-2001/07/19 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
- on Michael Brown <mbrown@fensystems.co.uk> patch:
- - enables graphical steps in auto_installs for more than gtk
- - various cleanup
-
- * globals.pm: no strict 'refs' instead of 'vars'
-
- * services.pm: rename ask_install_gtk in ask_install, ask_install is now
- ask_install_simple (obsolete)
-
-2001/07/18 mbadaire
-
- * modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm, install_steps.pm, install_steps_interactive.pm,
- tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
- diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
- NewWorld bootloader
- modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
- and S3 ViRGE on reboot
- with Aurora).
-
- * Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
- for these card.
-
-2001/07/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
- more used)
-
- * keyboard.pm: small keyboard changes
-
-2001/07/13 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update
-
-2001/07/12 François Pons <fpons@mandrakesoft.com>
-
- * fs.pm: fixed wrong examination of fsck return code (exit code 1 says
- fsck succeeded in
- fixing partition and now is ok).
-
- * run_program.pm: changed exit code of failed exec in rooted to 128
- instead of 1 (may clash with
- exit code of fsck else).
-
- * any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12 François Pons <fpons@mandrakesoft.com>
-
- * interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
- (default).
-
- * services.pm: reworked to use new service layout for install.
-
- * install_steps_gtk.pm: use common code for tree with info dialog
- (individual package selection).
-
- * fs.pm: fixed wrong examination of fsck return code (exit code 1 says
- fsck succeeded in
- fixing partition and now is ok).
-
- * interactive_gtk.pm: merging common code for individual package selection
- and service to create
- ask_browse_tree_info_refW, added featrures for group icon always
- up-to-date
- (take some memory but not too much, not used if flat model).
-
- * run_program.pm: changed exit code of failed exec in rooted to 128
- instead of 1 (may clash with
- exit code of fsck else).
-
- * any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
- define TIOCSCTTY, Makefile mods
-
-2001/07/09 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added multiple tries if a transaction of only one package
- fails.
-
- * install_any.pm: added LDAP support for authentication.
-
- * install_steps_interactive.pm: added LDAP support for password
- authentication, updated root password window look.
-
- * bootloader.pm: fixed compilation error.
- removed compilation error, the resolution is not quite good and may be
- reworked :-)
-
- * help.pm: updated root password help.
-
-2001/07/09 mbadaire
-
- * bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
- * common.pm: Add IA64 support
-
-2001/07/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
- boot partition is
- set correctly again
-
-2001/07/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
- boot partition is
- set correctly again
-
-2001/07/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed selected_leaves. change algorithm as previous one can
- still causes dead
- lock and may not reproduce correct list. take care of choice that need
- to be
- examined before else another package may be chosen if choice is not
- satisfied
- when selecting packages.
-
- * install_any.pm: change all 8 space into a tabulation, this is simple and
- may change visual
- aspect but it gives correct output and filesize by 40%.
-
-2001/07/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed selected_leaves. change algorithm as previous one can
- still causes dead
- lock and may not reproduce correct list. take care of choice that need
- to be
- examined before else another package may be chosen if choice is not
- satisfied
- when selecting packages.
-
- * install_any.pm: change all 8 space into a tabulation, this is simple and
- may change visual
- aspect but it gives correct output and filesize by 40%.
-
-2001/07/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl: some workarounds
-
-2001/07/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl: some workarounds
-
-2001/07/05 François Pons <fpons@mandrakesoft.com>
-
- * keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
- laptop is detected.
-
-2001/07/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (file2part): created
-
- * any.pm: ia64 bootloader configuration adaptations
-
- * bootloader.pm: typo fix
- ia64 bootloader configuration adaptations
-
-2001/07/04 dam's <damien@mandrakesoft.com>
-
- * globals.pm: added error handling
-
- * network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
- runs, and works for some stuff.
- modularization continuated
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
- corrected
-
- * standalone/draknet: corrected
-
- * network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
- works for some stuff.
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
- corrected
-
- * network/network.pm: modularized. It compiles, runs, and works for some
- stuff.
- modularization continuated
-
- * network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
- works for some stuff.
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
-
- * docs/net_object_class.fig: updated doc
-
-2001/07/04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added missing last Card read from Cards+ file.
- allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
- seems
- needing VideoRam too.
- fixed need of video ram if 86c368 and S3 ViRGE.
-
- * install_any.pm: another too wide string truncated to 80 chars.
- make auto_inst.cfg file no longer than 80 chars wide.
-
- * install_steps_interactive.pm: added back timezone settings (thanks
- FredC).
-
-2001/07/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
- * mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
- arrays to a too small value
-
- * docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04 mbadaire
-
- * tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
- tools/ia64/e2fsck.shared: Ia64 Adaptation
-
- * install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
- share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
- adaptation
-
-2001/07/04 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (selected_leaves): fix dead-loop
- (selected_leaves): make it work with loops (eg: mandrake_desk loops with
- control-center resulting on none of them being a leaf)
-
- * perl2fcalls: check exclude_uses before reporting bad use of "use"
- exclude module globals from use's to look at
-
- * globals.pm (import): yet another fix
- fix a pb when init is called before another import
- typo correction
- enhanced: shared values are grouped together based on a name
- module to share constant values between modules
-
- * fsedit.pm: add /boot/efi in suggestions for ia64
-
- * install_interactive.pm, install_steps.pm: fix typo
- verify a /boot/efi partition exists
-
- * Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
- share/list.sparc: remove busybox as default shell. Only use it as the
- interactive shell on tty2
-
-2001/07/03 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
- network/modem.pm, network/netconnect.pm, network/isdn.pm: network
- subsystem now compiles. Enjoy
-
- * docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03 François Pons <fpons@mandrakesoft.com>
-
- * network/netconnect.pm: fix another dam's sucks
- fix dam's sucks
-
- * network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
- * standalone/XFdrake: expert is allowed to choose frame buffer.
-
- * install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
- package selection file used by
- auto_install too from packages tree directly on floppies.
-
- * share/floppy.png: updated size to 16x22 to be more aligned.
- for loading/saving packages selection.
-
- * install_any.pm: modified g_default_packages to be used from package tree
- save on floppy.
-
- * install_steps_gtk.pm: added Load/Save on floppy.
- added improve choice of package, well not very usefull but asked by
- higher
- people :-)
-
-2001/07/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/rp-pppoe/gui/html/props-basic.png,
- mdk-stage1/rp-pppoe/gui/html/props-options.png,
- mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin.png,
- mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
- * modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
- mdk-stage1/usb-resource/Makefile,
- mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
- mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
- for install from USB Network Adapters
-
-2001/07/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
- share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
- share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
- share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
- share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03 Pixel <pixel@mandrakesoft.com>
-
- * timezone.pm (configureTimezone): propose a list of NTP servers
- (ntp_server): fix
- add ntp handling
-
- * fs.pm (mount): fix fsck.ext2'ing
- (mount): add fsck.ext2 before ext2-mounting
-
- * share/themes/DarkMarble-gloom2.png: re-adding with -kb
- re-adding with -kb
-
- * pixmaps/user.png: re-adding with -kb
- removing for re-adding with -kb
- re-adding with -kb
- removing for re-adding with -kb
-
- * share/themes/blueHeart-button4.png, share/reload.png,
- share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
- share/logo-mandrake.png, share/themes/marble3d-check1.png,
- share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
- share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
- share/rpm-installed.png, share/themes/marble3d-button1.png,
- share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
- share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
- share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
- share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
- pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
- share/themes/marble3d-button4.png, pixmaps/bootloader.png,
- share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
- share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
- share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
- share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
- pixmaps/rootpasswd.png, share/help.png,
- share/themes/DarkMarble-check_on.png,
- share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
- pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
- share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
- pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
- removing for re-adding with -kb
-
- * install_any.pm, install_steps.pm: add ntp handling
-
- * tools/addchangelog.pl: reverted the last erroneous modif
- re-adding with -kb
-
- * tools/ntp_servers.pl: get a formatted list of NTP servers from an
- authorised source
-
- * install_steps_interactive.pm (doPartitionDisks): better error message
- when no root partition is found
- (configureTimezone): propose a list of NTP servers
- add ntp handling
-
- * docs/comparisons: re-adding with -kb
-
-2001/07/02 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: new network sources reorganizationCVS:
- ----------------------------------------------------------------------
-
- * share/list: added modinfo
-
- * modparm.pm: syntax correction
-
- * network/netconnect_consts.pm, network.pm, standalone/draknet,
- network/tools.pm, netconnect.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm, network/adsl.pm,
- network/network.pm, network/modem.pm, netconnect_consts.pm: new network
- sources reorganization
-
-2001/07/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02 Pixel <pixel@mandrakesoft.com>
-
- * crypto.pm: remove buggy prototype
-
- * share/po/Makefile: yet even better i18n strings extraction
- - fix to add some missing messages
- - add more verif
-
- * c/stuff.xs.pm: use size_t instead of int where it should
-
- * Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
- XF3)
-
- * share/po/b_dump_strings.pm: high level i18n messages getting. only
- partial stuff. Used only for verification
-
- * perl2fcalls: add handling of using pkg::func when func is provided by
- pkg2 use'd by pkg
-
-2001/06/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/id.po: updated Indonesian file
-
-2001/06/25 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23 siegel
-
- * share/po/de.po: new german version
-
-2001/06/22 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: take care of enterprise kernel if installed.
-
- * install_any.pm: automagically install kernel-enterprise if memory is
- greater than 800MB.
-
-2001/06/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzyise
-
-2001/06/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, install_steps_interactive.pm,
- share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: generate_automatic_stage1_params: listize
- use busybox for the shell of stage2
-
- * mdk-stage1/Makefile: defaults to not spawn shell
-
- * mdk-stage1/hack: kloug
-
- * Makefile, tools/i386/busybox, share/list.ppc, share/list,
- share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21 Pixel <pixel@mandrakesoft.com>
-
- * docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
- s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
- * genmodparm: remove duplicate, look in gi/tools
-
- * standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
- mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
- standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
- mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
- mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
- bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
- * mdk-stage1/make_boot_img: remove GG sux
- s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
-2001/06/11 dam's <damien@mandrakesoft.com>
-
- * proxy.pm: updated
- typoCVS:
- ----------------------------------------------------------------------
- proxy
-
- * my_gtk.pm: added gtkset_layout
-
- * standalone/drakproxy: corrected CVS:
- ----------------------------------------------------------------------
- updated
- perlised
-
- * interactive.pm: no icon if wizard
-
-2001/06/11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: added some bigger memory range.
-
- * Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
- modifying mga_dma = 0
- really fix the Matrox G200 PCI card acceleration using XF3, by disabling
- DMA on
- /etc/X11/glx.conf
- added magic probe of resolution found, if the probed resolution seems
- strange
- according to memory available, it try to let the user select the right
- resolution and depth.
-
- * install_steps.pm, printer.pm: applied patches given for printer
- configuration bug reported by David Eastcott.
-
-2001/06/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: have PPP drivers in net_raw rather than in net
- add PPP modules for 'net' drivers
-
- * rescue/tree/etc/rc.sysinit: minor changes
-
- * rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
- as possible before rebooting the rescue
-
- * mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
- mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
- mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
- mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
- pppoe installation available
- Initial revision
- import initial ppp sources
-
- * mdk-stage1/dhcp.c: change location of error message when no reply
- received
-
- * mdk-stage1/rp-pppoe/man/pppoe-relay.8,
- mdk-stage1/rp-pppoe/configs/firewall-masq,
- mdk-stage1/rp-pppoe/gui/html/props-nic.png,
- mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
- mdk-stage1/rp-pppoe/configs/firewall-standalone,
- mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
- mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
- mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
- mdk-stage1/rp-pppoe/scripts/adsl-start.in,
- mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
- mdk-stage1/rp-pppoe/man/pppoe.8,
- mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
- mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
- mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
- mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
- mdk-stage1/rp-pppoe/man/pppoe-server.8,
- mdk-stage1/rp-pppoe/configs/pppoe.conf,
- mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
- mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
- mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
- mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
- mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
- mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
- mdk-stage1/rp-pppoe/scripts/adsl-init.in,
- mdk-stage1/rp-pppoe/rp-pppoe.spec,
- mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
- mdk-stage1/rp-pppoe/man/pppoe.conf.5,
- mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
- mdk-stage1/rp-pppoe/man/adsl-start.8,
- mdk-stage1/rp-pppoe/gui/html/mainwin.png,
- mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
- mdk-stage1/rp-pppoe/gui/html/props-basic.png,
- mdk-stage1/rp-pppoe/man/adsl-status.8,
- mdk-stage1/rp-pppoe/configs/pppoe-server-options,
- mdk-stage1/rp-pppoe/man/adsl-connect.8,
- mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
- mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
- mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
- mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
- mdk-stage1/rp-pppoe/README,
- mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
- mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
- mdk-stage1/rp-pppoe/scripts/adsl-status,
- mdk-stage1/rp-pppoe/man/adsl-setup.8,
- mdk-stage1/rp-pppoe/gui/html/props-options.png,
- mdk-stage1/rp-pppoe/src/configure.in,
- mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
- mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
- mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
- mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
- import initial sources from rp-pppoe v3.0
-
- * mdk-stage1/Makefile: change handling of .depend in Makefile
- have adsl pppoe installation available
-
- * mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
- that will show us '**' for passwords
-
- * mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
- mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
- mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
- mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
- mdk-stage1/make_boot_img: have adsl pppoe installation available
-
- * detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
- autodetect raid arrays (still needs a kernel that implements the
- ioctl..)
-
- * tools/Makefile: perl 5.6.1 now
-
- * mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
- my code anymore, expect the bootloader to set the parameter correctly
-
- * mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
- mdk-stage1/ppp/solaris/Makefile.sol2,
- mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
- mdk-stage1/ppp/solaris/Makefile.sol2-64,
- mdk-stage1/ppp/include/net/ppp_defs.h,
- mdk-stage1/ppp/pppstats/Makefile.sunos4,
- mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
- mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
- mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
- mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
- mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
- mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
- mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
- mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
- mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
- mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
- mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
- mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
- mdk-stage1/ppp/svr4/ppp_comp_mod.c,
- mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
- mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
- mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
- mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
- mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
- mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
- mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
- mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
- mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
- mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
- mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
- mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
- mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
- mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
- mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
- mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
- mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
- mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
- mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
- mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
- mdk-stage1/ppp/include/linux/if_pppvar.h,
- mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
- mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
- mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
- mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
- mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
- mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
- mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
- mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
- mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
- mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
- mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
- mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
- mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
- mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
- mdk-stage1/ppp/pppd/plugins/passprompt.c,
- mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
- mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
- mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
- mdk-stage1/ppp/pppd/Makefile.sol2,
- mdk-stage1/ppp/pppd/plugins/minconn.c,
- mdk-stage1/ppp/etc.ppp/options.options,
- mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
- mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
- mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
- mdk-stage1/ppp/etc.ppp/chap-secrets,
- mdk-stage1/ppp/pppstats/Makefile.linux,
- mdk-stage1/ppp/sample/pap-secrets,
- mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
- mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
- mdk-stage1/ppp/include/linux/ppp_defs.h,
- mdk-stage1/ppp/scripts/chatchat/chatchat.c,
- mdk-stage1/ppp/scripts/chatchat/README,
- mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
- mdk-stage1/ppp/svr4/Makedefs,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
- mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
- mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
- mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
- mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
- mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
- mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
- mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
- mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
- mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
- mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
- mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
- mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
- mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
- mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
- mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
- mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
- mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
- mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
- mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
- mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
- mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
- mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
- mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
- mdk-stage1/ppp/svr4/Makefile.svr4,
- mdk-stage1/ppp/pppd/plugins/Makefile.linux,
- mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
- import initial ppp sources
-
-2001/06/11 odin
-
- * standalone/drakproxy: first import of drakproxy
-
-2001/06/11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): don't check /usr/bin/urpmi, better check
- /usr/sbin/urpmi.update
-
- * commands.pm (grep_): add a missing semi-colon
-
- * share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
- rescue/Makefile:
- - add 'guessmounts' that mimics RH's detecting of partitions when
- rescue starts
-
-2001/06/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
- * share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10 Pixel <pixel@mandrakesoft.com>
-
- * rescue/guessmounts: pixelization (tested!)
-
- * install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list.i386: rescuept is in /sbin now
-
- * share/list: rescuept in /sbin now
-
-2001/06/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: don't wait on upping lo interface
-
- * mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
- i need working random suite for ppp with dietlibc
-
- * mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
- stage1 processes!
-
-2001/06/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po: updated Polish file
-
-2001/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): notail in any case
-
- * tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
- tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
- the example
-
- * share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
- * Makefile: fix
-
-2001/06/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
- stage1-full
-
- * mdk-stage1/stage1.c: minor fix
-
- * mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
- i want to link against glibc too
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-
- - have strncat behave the same way as in glibc
- - declare that we're using the DIETLIBC in include/stdlib.h, so I can
- change my mind in "dns.c" to handle broken glibc which is not capable of
- doing name resolution with a static binary
-
- * mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
- mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
- mdk-stage1/url.c, mdk-stage1/network.h:
- - first draft of adsl support
- - get back some code for supporting broken glibc unable to resolve
- when linked statically
-
- * mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
- mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
- mdk-stage1/dietlibc/lib/tcsetattr.c,
- mdk-stage1/dietlibc/include/termios.h,
- mdk-stage1/dietlibc/include/netdb.h,
- mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
- stuff compile better
-
-2001/05/31 daouda
-
- * bootlook.pm: add runlevel chooser feature
-
-2001/05/31 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: check presence of files from list and list.ARCH
-
- * Makefile (get_needed_files): exit with error message if files from
- share/list (and
- share/list.ARCH) are missing
-
- * install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30 mbadaire
-
- * mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
- mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
- mdk-stage1/insmod-modutils/obj/Makefile,
- mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
- mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
- mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
- mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c:
- - allow build on ia64
- - have CFLAGS centralized in Makefile.common (should help ports such
- as alpha)
- - better looking sub makefiles
-
-2001/05/30 Pixel <pixel@mandrakesoft.com>
-
- * Makefile.drakxtools (install): ensure pm's in subdirs don't have
- /use(diagnostics|vars|strict)/
-
-2001/05/29 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added fix from Michael Brown to handle pipe in queue
- name for lpr.
-
-2001/05/29 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/compssUsers: add NIS client to network clients
-
-2001/05/29 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added fix from Michael Brown to handle pipe in queue
- name for lpr.
-
-2001/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
- rewritten..)
-
-2001/05/25 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
- bootstrap creation, formatting sequence
-
- * install_steps_interactive.pm: fix bootstrap information screen back to
- orig with missing ":" - PPC
- add hfs support to rescue - PPC, fix bootstrap creation, formatting
- sequence
-
-2001/05/25 siegel
-
- * share/po/de.po: updated time
- moved to UTF-8
-
-2001/05/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
-2001/05/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_auto_install): autoExitInstall set if not replay (was
- the opposite)
-
-2001/05/23 Pixel <pixel@mandrakesoft.com>
-
- * rescue/list: add scd0...
-
-2001/05/22 siegel
-
- * share/po/de.po: updates
-
-2001/05/21 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
- of PPC boot CD on x86 platform
-
-2001/05/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c:
- - better detect when IP is not good
- - error_msg when netmask seems invalid
- - don't log too much `guessing netmask'
-
- * mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
- each
-
-2001/05/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
- table is not right (MAXDATA
- for example), this cause parted to ignore warning.
- added blank space between partition windows and linux to help resolving
- above case.
- fixed hole in partitionning (need testing), use fdisk to get disk
- geometry and
- create partition that matches cylinder boundaries (no more
- approximation).
- make sure to create all partitions including /home.
-
-2001/05/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
- don't write nonsense code to separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/probing.c: unify user notification of network and scsi
- devices that make load of drivers
- don't write nonsense code to separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
- mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
- mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
- separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/frontend-common.c: plop
-
-2001/05/16 dam's <damien@mandrakesoft.com>
-
- * pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
- pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
- pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
- pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
- * standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
- standalone/draksec, standalone/drakxservices, standalone/drakgw,
- standalone/XFdrake, standalone/adduserdrake: added icon management
-
- * my_gtk.pm, interactive.pm: icons management
-
- * install2.pm: added icons management
-
- * standalone/draknet: added icon managment
-
- * pixmaps/printer.png: added icon
-
-2001/05/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added support for /var creation, and more specific
- package selection for server.
- Include option support by VERSION file.
-
-2001/05/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
- mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
- mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
- mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
- and code from stage1
-
-2001/05/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
- updated Turkish file
-
-2001/05/16 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: fix yet again DrakX.pot making
-
- * partition_table.pm: re-add reiserfs as it should
- add xfs
-
-2001/05/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
- usefull.
-
-2001/05/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: libresolv deprecated in GLIBC
- have stage1-full with pcmcia also compile with dietlibc, cool!
-
- * mdk-stage1/network.c: fix guess netmask
- configure_net_device is only used internally
-
- * mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
- interface (use of enum rather than guessing single numbers..)
-
- * mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
- * mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
- with dietlibc, cool!
- - build glibc and dietlibc targets
- - bzero string buffer before sscanf call (dietlibc implementation)
- - verify returns of ioperm so that I can use it in test mode
-
- * mdk-stage1/dietlibc/include/sys/file.h,
- mdk-stage1/dietlibc/include/sys/io.h,
- mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
- also compile with dietlibc, cool!
-
- * mdk-stage1/stage1.c: a bit of size reduction plus some language change
- blurk
-
- * mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
- * mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
- * mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
- dietlibc implementation
-
- * mdk-stage1/network.h: configure_net_device is only used internally
-
- * mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c:
- - build glibc and dietlibc targets
- - bzero string buffer before sscanf call (dietlibc implementation)
- - verify returns of ioperm so that I can use it in test mode
-
- * standalone/drakgw: full path for iptables
-
- * mdk-stage1/probing.c: allow wait_message calls to be multi-lines
- nicer layout for PCI detection messages
- better modules handling interface (use of enum rather than guessing
- single numbers..)
-
-2001/05/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po, share/po/ar.po: Updated Turkish file
-
- * share/keyboards.tar.bz2: Added north-african keyboard
-
- * keyboard.pm: added arabic azerty keyboard
-
-2001/05/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: use new gethostby* interface
-
- * mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
- which provides the busybox
-
- * mdk-stage1/network.c: Have the wait_message() with the sleep()
- - complies to gethostby functions
- - add sleep(2) so that net intf is really up before operation
- - more logs
- - FTP: don't try to close control connection with data socket, erhm
- :-(
- - debug netmask guessing, with stdio-frontend
-
- * mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
- every targets build with dietlibc
-
- * mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
- * mdk-stage1/tools.c: no need to poll() for data at beginning of
- load_ramdisk_fd, it was a fix of another problem (bug with file stdio
- operations with sockets in dietlibc)
-
- * mdk-stage1/dietlibc/Makefile: build this new dietlibc
- import new version of dietlibc
-
- * mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
- provided by dietlibc
-
- * mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
- * mdk-stage1/stage1.c: we don't use this sucking sash no more
- we now use `busybox' compiled with the marvellous dietlibc, which
- provides no less than 73 usefull binaries
-
- * mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
- mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
- mdk-stage1/dietlibc/include/sys/ipc.h,
- mdk-stage1/dietlibc/alpha/sendmsg.S,
- mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
- mdk-stage1/dietlibc/sparc/__testandset.S,
- mdk-stage1/dietlibc/syscalls.s/open.S,
- mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
- mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
- mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
- mdk-stage1/dietlibc/include/sys/syscall.h,
- mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
- mdk-stage1/dietlibc/syscalls.s/ptrace.s,
- mdk-stage1/dietlibc/lib/isprint.c,
- mdk-stage1/dietlibc/syscalls.s/dietstat.S,
- mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
- mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
- mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
- mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
- mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
- mdk-stage1/dietlibc/include/sys/sem.h,
- mdk-stage1/dietlibc/syscalls.s/query_module.S,
- mdk-stage1/dietlibc/lib/strchr.c,
- mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
- mdk-stage1/dietlibc/syscalls.s/lstat64.S,
- mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
- mdk-stage1/dietlibc/lib/perror.c,
- mdk-stage1/dietlibc/include/sys/socket.h,
- mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
- mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
- mdk-stage1/dietlibc/include/utmp.h,
- mdk-stage1/dietlibc/syscalls.s/sendfile.S,
- mdk-stage1/dietlibc/syscalls.s/nice.S,
- mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
- mdk-stage1/dietlibc/syscalls.s/select.S,
- mdk-stage1/dietlibc/include/sys/mtio.h,
- mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
- mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
- mdk-stage1/dietlibc/lib/__telldir.c,
- mdk-stage1/dietlibc/i386/__testandset.S,
- mdk-stage1/dietlibc/lib/remove.c,
- mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
- mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
- mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
- mdk-stage1/dietlibc/include/sys/un.h,
- mdk-stage1/dietlibc/alpha/connect.S,
- mdk-stage1/dietlibc/include/termios.h,
- mdk-stage1/dietlibc/lib/sigfillset.c,
- mdk-stage1/dietlibc/lib/sigismember.c,
- mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
- mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
- mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
- mdk-stage1/dietlibc/lib/tcsetpgrp.c,
- mdk-stage1/dietlibc/sparc/Makefile.add,
- mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
- mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
- mdk-stage1/dietlibc/include/inttypes.h,
- mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
- mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
- mdk-stage1/dietlibc/alpha/recvmsg.S,
- mdk-stage1/dietlibc/syscalls.s/fork.S,
- mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
- mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
- mdk-stage1/dietlibc/include/features.h,
- mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
- mdk-stage1/dietlibc/syscalls.s/writev.S,
- mdk-stage1/dietlibc/lib/fputs.c,
- mdk-stage1/dietlibc/alpha/sigprocmask.S,
- mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
- mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
- mdk-stage1/dietlibc/syscalls.s/creat.S,
- mdk-stage1/dietlibc/include/sys/sysinfo.h,
- mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
- mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
- mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
- mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
- mdk-stage1/dietlibc/include/dirent.h,
- mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
- mdk-stage1/dietlibc/include/net/route.h,
- mdk-stage1/dietlibc/syscalls.s/exit.S,
- mdk-stage1/dietlibc/include/pthread.h,
- mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
- mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
- mdk-stage1/dietlibc/lib/execvp.c,
- mdk-stage1/dietlibc/syscalls.s/__reboot.S,
- mdk-stage1/dietlibc/lib/stdin.c,
- mdk-stage1/dietlibc/syscalls.s/getitimer.S,
- mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
- mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
- mdk-stage1/dietlibc/sparc/fork.S,
- mdk-stage1/dietlibc/syscalls.s/__pread.S,
- mdk-stage1/dietlibc/include/sys/poll.h,
- mdk-stage1/dietlibc/syscalls.s/personality.S,
- mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
- mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
- mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
- mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
- mdk-stage1/dietlibc/include/sys/param.h,
- mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
- mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
- mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
- mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
- mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
- mdk-stage1/dietlibc/include/sys/kd.h,
- mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
- mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
- mdk-stage1/dietlibc/include/sys/mman.h,
- mdk-stage1/dietlibc/lib/__readdir.c,
- mdk-stage1/dietlibc/lib/cfgetospeed.c,
- mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
- mdk-stage1/dietlibc/alpha/reml.S,
- mdk-stage1/dietlibc/syscalls.s/fcntl.S,
- mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
- mdk-stage1/dietlibc/syscalls.s/ipc.S,
- mdk-stage1/dietlibc/syscalls.s/mlockall.S,
- mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
- mdk-stage1/dietlibc/include/sys/msg.h,
- mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
- mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
- mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
- mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
- mdk-stage1/dietlibc/include/net/if_arp.h,
- mdk-stage1/dietlibc/lib/execlp.c,
- mdk-stage1/dietlibc/syscalls.s/stat64.S,
- mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
- mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
- mdk-stage1/dietlibc/syscalls.s/fstat64.S,
- mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
- mdk-stage1/dietlibc/include/sys/reboot.h,
- mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
- mdk-stage1/dietlibc/include/sys/sendfile.h,
- mdk-stage1/dietlibc/include/sys/syslog.h,
- mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
- mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
- mdk-stage1/dietlibc/lib/vsnprintf.c,
- mdk-stage1/dietlibc/include/signal.h,
- mdk-stage1/dietlibc/syscalls.s/pause.S,
- mdk-stage1/dietlibc/include/arpa/inet.h,
- mdk-stage1/dietlibc/include/sys/wait.h,
- mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
- mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
- mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
- mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
- mdk-stage1/dietlibc/lib/__ltostr.c,
- mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
- mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
- mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
- mdk-stage1/dietlibc/lib/htons.c,
- mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
- mdk-stage1/dietlibc/include/sys/resource.h,
- mdk-stage1/dietlibc/lib/__stat64_cvt.c,
- mdk-stage1/dietlibc/lib/localtime.c,
- mdk-stage1/dietlibc/alpha/seteuid.c,
- mdk-stage1/dietlibc/syscalls.s/stime.S,
- mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
- mdk-stage1/dietlibc/ppc/Makefile.add,
- mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
- mdk-stage1/dietlibc/include/net/if.h,
- mdk-stage1/dietlibc/include/shadow.h,
- mdk-stage1/dietlibc/lib/__rewinddir.c,
- mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
- mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
- mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
- mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
- mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
- mdk-stage1/dietlibc/include/regex.h,
- mdk-stage1/dietlibc/include/sys/ptrace.h,
- mdk-stage1/dietlibc/lib/tcdrain.c,
- mdk-stage1/dietlibc/syscalls.s/lstat.S,
- mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
- mdk-stage1/dietlibc/lib/random.c,
- mdk-stage1/dietlibc/syscalls.s/times.S,
- mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
- mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
- mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
- mdk-stage1/dietlibc/ppc/__testandset.S,
- mdk-stage1/dietlibc/include/mntent.h,
- mdk-stage1/dietlibc/include/sys/file.h,
- mdk-stage1/dietlibc/syscalls.s/fstat.S,
- mdk-stage1/dietlibc/syscalls.s/llseek.S,
- mdk-stage1/dietlibc/lib/strsep.c,
- mdk-stage1/dietlibc/include/sys/stat.h,
- mdk-stage1/dietlibc/syscalls.s/munlockall.S,
- mdk-stage1/dietlibc/syscalls.s/setpriority.S,
- mdk-stage1/dietlibc/include/assert.h,
- mdk-stage1/dietlibc/include/strings.h,
- mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
- mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
- mdk-stage1/dietlibc/ppc/__longjmp.S,
- mdk-stage1/dietlibc/lib/__closedir.c,
- mdk-stage1/dietlibc/include/sys/signal.h,
- mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
- mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
- mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
- mdk-stage1/dietlibc/lib/tm_conv.c,
- mdk-stage1/dietlibc/syscalls.s/reboot.S,
- mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
- mdk-stage1/dietlibc/syscalls.s/umount2.S,
- mdk-stage1/dietlibc/syscalls.s/readv.S,
- mdk-stage1/dietlibc/lib/__fxstat.c,
- mdk-stage1/dietlibc/include/sys/select.h,
- mdk-stage1/dietlibc/syscalls.s/syslog.S,
- mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
- mdk-stage1/dietlibc/lib/fprintf.c,
- mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
- mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
- mdk-stage1/dietlibc/syscalls.s/getcwd.S,
- mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
- mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
- mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
- mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
- mdk-stage1/dietlibc/lib/__opendir.c,
- mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
- mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
- mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
- mdk-stage1/dietlibc/lib/__getcwd.c,
- mdk-stage1/dietlibc/include/netinet/in.h,
- mdk-stage1/dietlibc/lib/shmctl.c,
- mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
- mdk-stage1/dietlibc/include/arpa/nameser.h,
- mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
- mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
- mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
- mdk-stage1/dietlibc/lib/stderr.c,
- mdk-stage1/dietlibc/syscalls.s/close.S,
- mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
- mdk-stage1/dietlibc/include/locale.h,
- mdk-stage1/dietlibc/syscalls.s/getpriority.S,
- mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
- mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
- mdk-stage1/dietlibc/include/sys/mount.h,
- mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
- mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
- mdk-stage1/dietlibc/lib/islower.c,
- mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
- mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
- mdk-stage1/dietlibc/include/ctype.h,
- mdk-stage1/dietlibc/include/netdb.h,
- mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
- mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
- mdk-stage1/dietlibc/syscalls.s/waitpid.S,
- mdk-stage1/dietlibc/lib/strtoul.c,
- mdk-stage1/dietlibc/syscalls.s/stat.S,
- mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
- * mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
- * mdk-stage1/dietlibc/include/stdio.h,
- mdk-stage1/dietlibc/include/stdlib.h,
- mdk-stage1/dietlibc/include/math.h,
- mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
- with dietlibc
- import new version of dietlibc
-
- * mdk-stage1/Makefile.common: new dietlibc binaries location
-
- * mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
- now
-
- * mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
- * mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
- - add a sleep(2) after ioctl ifupping so that further operation can
- work normally
- - more logs
-
-2001/05/14 kjx
-
- * share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed missing package which may be selected on
- hardware during real install.
-
- * rescue/tree/etc/oem: added support to change boot entries when invoking
- oem script.
- fixed missing SCSI support and driver module loading.
- fixed missing speficic packages not installed on HW detected.
-
-2001/05/08 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: VBox -> HBox in Embedded mode
-
- * standalone/mousedrake: code cleaned and debugged
- added mouse test. Ugly
-
-2001/05/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: fix minor stuff
- re-include correct layout for [] choices, in a smaller way than before
-
- * mdk-stage1/tools.c: minor fix
- needs to poll() for available data before loading ramdisk because ftp
- transfers would fail in some situations
-
- * mdk-stage1/init.c: new maxim
-
- * mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
- is printed when last blocks of file are read
-
- * mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
- ----------------------------------------------------------------------
-
-2001/05/08 siegel
-
- * share/po/de.po: fixed plenty ugly typos
-
-2001/05/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07 yduret
-
- * docs/README.devel: fix one typo
-
- * any.pm, bootloader.pm: updated install_lilo() according to new lilo
- package
- (/boot/lilo-{menu,graphic,text})
-
-2001/05/06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install2.pm: workaround for msec hang on PPC
-
-2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
- don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
- statusreport, when update_progression
- Provide some description of the drivers
-
- * docs/HACKING: fix
- pserver -> ext
-
- * mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
- mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
- mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30 Pixel <pixel@mandrakesoft.com>
-
- * docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
- * docs/advocacy: fuck'em all
-
-2001/04/26 François Pons <fpons@mandrakesoft.com>
-
- * docs/README.devel, docs/README: added some more comments for DrakX code
- source and usage.
-
-2001/04/25 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed use of VERSION file to find language.
- prepare a oem disk to be used by moving all files that will not be
- installed by oem (oem-master disk preparation).
-
- * rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
- usage of free space on disk, added NVIDIA packages to install.
-
- * rescue/tree/etc/oem-server: added missing VERSION file.
- fixed usage of free space on disk, added NVIDIA packages to install.
-
- * rescue/tree/etc/oem: added missing autologin package.
- added option to enable oem mode.
- added missing VERSION file.
- fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
- integrate fg's fixes for includes
-
-2001/04/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
- rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: fix bug that trashes the network config of stage1
- during stage2, when no DNS is provided
-
-2001/04/18 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: last corrections
-
- * standalone/draknet, netconnect.pm: last corrections
- corrected internet connection test, and parameters editing
-
- * install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
- * drakprofile in level 1
- * swapped tkinter and python-devel
- * vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
- * vnc-SVGALIB in level 2
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * standalone/mousedrake: fixed embedded
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: restored grub as everything seems fine.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
-
- * install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * standalone/draknet: fixed typo
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Basque file
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 warly
-
- * share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * standalone/mousedrake: fixed embedded
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: restored grub as everything seems fine.
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
- * install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Basque file
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): set NIS to broadcast
- when NIS asked. Empty NIS still means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * any.pm: removed Grub if Embedded
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: minor bug.
-
- * any.pm: removed Grub if Embedded
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: updated
- updated
-
- * network.pm: dhcpd -> dhcpcd
-
- * Xconfigurator.pm: added nice monitor.png
-
- * netconnect.pm: minor bug.
- dhcpd -> dhcpcd
-
- * standalone/draknet: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added missing rio500 in closure.
- finally fixed menu by generating /etc/rpm/macros file.
- added missing LF.
- now fixed menu problems.
- try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
- fr:fr_FR.
- really disable server.
- maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * fs.pm: restored not neccessary to load reiserfs for formating.
- loading reiserfs module before formatting.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
- * mdk-stage1/TECH-INFOS: update doc
-
- * share/po/fr.po: fix minor thing
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: added nice monitor.png
-
- * standalone/net_monitor: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
- "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: bugfix
- added update thread
- corrected bad install package.
- updated expert mode
-
- * network.pm, install_steps.pm: corrected bad install package.
-
- * Xconfigurator.pm: added nice monitor.png
-
- * tinyfirewall.pm: corrected package installation
-
- * standalone/net_monitor: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
- * netconnect.pm: debug
- corrected bad install package.
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
- "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
- * install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/15 fabman
-
- * share/po/es.po: updates
-
-2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix minor typo
-
-2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/gl.po: updated Galician file
-
-2001/04/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
- Workstation, Server) to make gg happy
-
-2001/04/15 fabman
-
- * share/po/es.po: updates
-
-2001/04/15 fcrozat
-
- * share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix minor typo
-
-2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
- Workstation, Server) to make gg happy
-
- * printerdrake.pm (main): restore the "Ok" button for the queues
- manipulation
-
- * any.pm (write_passwd_user): fix use of local
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
- around "require log" to keep perl from going totally mad (getting things
- like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15 yduret
-
- * bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
- mcc normally
- fix layout & size
-
-2001/04/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected isdn detect display
-
- * standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
- selection of packages.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): add apache
-
- * install_gtk.pm (createXconf): ensure the mouse device is created (mainly
- for auto_inst)
-
- * install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
- button (thx2submarine)
-
-2001/04/14 warly
-
- * share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
- powerpack boxes without ViaVoice
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
- selection of packages.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed to gzip synthesis file.
- safe guard generation of synthesis file.
- fixed umask on urpmi list file and generate synthesis file for each
- hdlist.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): fix link /etc/gtk (to
- /mnt/etc/gtk) instead of /etc/gtkrc
-
- * any.pm (autologin): spurious messages of chksession -> dave nul
-
- * interactive_newt.pm (exit): fix the exit code
- (wait_message_endW): don't log "none stacked wait-messages" (as a lot of
- them exist...)
- (waitbox): remove spurious '0' in wait_messages
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14 warly
-
- * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
- and list
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed to gzip synthesis file.
- safe guard generation of synthesis file.
- fixed umask on urpmi list file and generate synthesis file for each
- hdlist.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): fix link /etc/gtk (to
- /mnt/etc/gtk) instead of /etc/gtkrc
-
- * any.pm (autologin): spurious messages of chksession -> dave nul
-
- * interactive_newt.pm (exit): fix the exit code
- (wait_message_endW): don't log "none stacked wait-messages" (as a lot of
- them exist...)
- (waitbox): remove spurious '0' in wait_messages
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
- setup for PPC
-
-2001/04/14 warly
-
- * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
- and list
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
- opened).
-
-2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: Updated Norwegian file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated po files
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): reverse message
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
- ru(winkeys), it is redondant
-
- * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
- * any.pm (ask_users): do not have an empty icon. better not ask for icon
- if no icon
-
-2001/04/13 siegel
-
- * share/po/de.po: updates
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
- opened).
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): reverse message
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
- ru(winkeys), it is redondant
-
- * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
- * any.pm (ask_users): do not have an empty icon. better not ask for icon
- if no icon
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * standalone/draknet: message corrected
- updated
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * bootlook.pm: embedded = 0 -> local
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
- add DATABASES to Database
- add icons for server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * network.pm: updated wireless configuration
-
- * netconnect.pm: corrected loop in isdn + other things
-
- * bootlook.pm: embedded = 0 -> local
-
- * standalone/draknet: updated
- added delete event
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * netconnect.pm: fixed syntax error :-)
-
- * install_steps.pm, install_steps_gtk.pm: added conditional update-menus
- if package are installed.
-
- * install_steps_interactive.pm: added conditional update-menus if package
- are installed.
- make sure update-menus is called after installing cups related packages.
-
-2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
- Croatian and Swedish files
-
- * share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
- share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
- translating ( < 60% )
- so they are not included on final CD
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * my_gtk.pm (new): make dams happy
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add DATABASES to Database
- add icons for server
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed wrong kernel version extraction (typically for
- upgrade).
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * interactive.pm: removed strict die on empty list.
-
- * live_install2: added some gtk and gdk_imlib missing variables.
-
- * live_install: removed gtk variable for data, moved to second script.
-
- * modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: remove unneeded #define
-
- * standalone/drakgw: add some rule so later on tinyfirewall will not
- prevent everything from working
-
- * share/po/fr.po: minor fix
- write some ppc translations
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Updated Italian file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * printer.pm: use run_program and remove "require run_program"s
-
- * my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
- exposure (so
- that not to receive motion_notify which would generate focus_out in
- non-interesting cases)
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
- for empty lists
- (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: if neuneu but explicited clicked, don't skip
- corrected pcmcia driver
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * common.pm: improved bestMatchSentence2.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * interactive.pm: removed strict die on empty list.
-
- * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: add some rule so later on tinyfirewall will not
- prevent everything from working
-
- * share/po/fr.po: write some ppc translations
- un-dadouize a problem
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Updated Italian file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix no advertising with less
- than 20MB of packages
-
- * interactive.pm (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * install_steps_interactive.pm (configureX): fix for X test at install
- with exotic fonts
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected typo
- added use bootloader
-
- * standalone/net_monitor: typo
-
- * netconnect.pm: if neuneu but explicited clicked, don't skip
- corrected pcmcia driver
- corrected typo
-
- * lang.pm: pixel sux
-
- * network.pm, standalone/draknet: corrected network connection
-
- * my_gtk.pm: corrected set_modal
-
-2001/04/12 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * common.pm: improved bestMatchSentence2.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: un-dadouize a problem
- sync
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
- share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
- share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
- share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
- share/po/id.po: Updated Chinese file
-
- * share/po/it.po: Updated Italian file
- Updated Chinese file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix no advertising with less
- than 20MB of packages
-
- * interactive.pm (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * install_steps_interactive.pm (configureX): fix for X test at install
- with exotic fonts
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 siegel
-
- * share/po/de.po: new german version
-
-2001/04/12 yduret
-
- * bootlook.pm: added some stuff
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected typo
- added use bootloader
-
- * netconnect.pm: corrected typo
-
-2001/04/12 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/12 siegel
-
- * share/po/de.po: new german version
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: tooltips
-
- * netconnect.pm: updated
-
- * my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): relook
-
- * install_steps_interactive.pm (chooseGroups): warn if chosen size is too
- big
-
- * share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11 yduret
-
- * bootlook.pm: bug fix in autologin
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: tooltips
-
- * bootlook.pm: updated
- corrected
-
- * tinyfirewall.pm: installation of package : not at the same place
-
- * netconnect.pm: updated
- added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added missing LD_LOADER for calling rpm.
-
- * printerdrake.pm: fixed probe on kernel 2.4.
- make printer devices more accurate.
- removed limitation to only one port probed
-
- * pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
- upgrade.
-
- * detect_devices.pm: avoid need of shell for live upgrade on serial_probe
- (removed 2>/dev/null which
- is not necessary).
- fixed printer probe (usb and parallel).
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * lang.pm: added missing LD_LOADER reference and remove old code
- commented.
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzyize
- sync with new msg in services.pm and compssUsers
- sync with pablo update
- fixes of translations
- write the shitload of untranslated and fuzzy msg
-
- * standalone/tinyfirewall: i18n title
-
- * services.pm: have many more services tooltipped from here so we can get
- translations afterwards
-
- * share/compssUsers: fix typos of rpmsrate groups
-
- * standalone/drakgw: kosmetik
- do i18n for title also
-
-2001/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: Added reference to netscape-chinese_big5 file
-
- * share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
- Updated po files
- Updated Slovak, Walloon and Polish files
-
- * share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
- share/po/ca.po, share/po/cs.po: Updated po files
- Updated Slovak, Walloon and Polish files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
- share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
- share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/af.po: Updated po files
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * share/compssUsers: adapt for new profile choosing layout
-
- * Makefile: take cardmgr-*
-
- * install_steps_interactive.pm (chooseGroups): warn if chosen size is too
- big
- translate the ``path'' in profile selection
-
- * share/po/i18n_compssUsers: relooking
-
- * any.pm (setupBootloader): translate the bootloaders to use
- (setupBootloader): nicer look&feel
-
- * install_any.pm (fsck_option): add a closing ``"'' so that strings to
- i18n extraction works
- (fsck_option): add a closing ``"'' so that strings to i18n extraction
- works
- (check_prog): make it work
-
- * install_steps_gtk.pm (reallyChooseGroups): relook
- (installPackages): pressing "Details" gives you more detailed info
- (reallyChooseGroups): start relooking
- (installPackages): don't display advertising if less 20MB of packages
- translate the ``path'' in profile selection
-
-2001/04/11 warly
-
- * share/compssUsers: Add descr for servers
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make printer devices more accurate.
- removed limitation to only one port probed
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * services.pm: have many more services tooltipped from here so we can get
- translations afterwards
-
- * share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
- * share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
-
- * diskdrake.pm (More): fix exception relaunching
-
- * install_any.pm (check_prog): make it work
-
- * any.pm (setupBootloader): nicer look&feel
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * Makefile: take cardmgr-*
-
-2001/04/11 fabman
-
- * share/po/es.po: updated spanish .po file
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make printer devices more accurate.
- removed limitation to only one port probed
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
- - completly remove po's (will be getFile'd)
- - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * share/aliases: add rmmod -> insmod_
-
- * lang.pm (get_x_fontset): special cases for some big (size) fonts
-
- * Makefile: take cardmgr-*
-
- * install_any.pm (check_prog): make it work
- (check_prog): if a prog isn't available, try to fetch it via getFile
- (remove_bigseldom_used): created, purpose: remove unneeded stuff on
- stage2
- to allow a getAndSaveFile.
- (getAndSaveFile): if only one arg is given, assume the name is the same
-
- * standalone/XFdrake: fix bug for running xfs
-
- * any.pm (setupBootloader): nicer look&feel
-
- * diskdrake.pm (More): fix exception relaunching
- check resize_reiserfs is there or get it
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
- in install, call install_any::check_prog to allow shadow progs which are
- fetched when needed via getFile
-
- * share/list: remove rmmod (is now a symlink)
-
-2001/04/11 siegel
-
- * share/po/de.po: updated german version
-
-2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po: Updated Catalan file
-
-2001/04/10 Pixel <pixel@mandrakesoft.com>
-
- * Makefile:
- - fix wiz_*.png removing
- - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
- - completly remove po's (will be getFile'd)
- - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
- * standalone/XFdrake: fix bug for running xfs
-
- * diskdrake.pm: check resize_reiserfs is there or get it
-
- * share/aliases: add rmmod -> insmod_
-
- * install_any.pm (check_prog): if a prog isn't available, try to fetch it
- via getFile
- (remove_bigseldom_used): created, purpose: remove unneeded stuff on
- stage2
- to allow a getAndSaveFile.
- (getAndSaveFile): if only one arg is given, assume the name is the same
-
- * share/list: remove rmmod (is now a symlink)
-
- * run_program.pm: in install, call install_any::check_prog to allow shadow
- progs which are
- fetched when needed via getFile
-
- * lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad network restart
-
- * my_gtk.pm: corrected bad font
-
- * network.pm: get rid of ifcfg-
- minor correction
-
-2001/04/10 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed selection of CDs.
-
- * devices.pm: added input/event class of devices (necessary for usb wacom
- at install)
-
-2001/04/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
- mdk-stage1/mkinitrd_helper/Makefile:
- - honour quiet mode at boot time
- - fake modprobe to shut up kmod
-
- * bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
- * standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
- interoperation with bastille-firewall
-
-2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: Updated Czech file
- Updated po files
-
- * share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
- Indonesian, Japanese, Korean and Vietnamese files
- Updated po files
-
- * share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
- translatable string
- Updated po files
-
- * share/po/ca.po: Updated Catalan file
- Updated po files
-
- * share/locales.tar.bz2: Added missing file for Vietnamese
-
- * share/po/bg.po: Updated Bulgarian file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
- share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
- '')
- (create_boxradio): handle double_click
- (ask_from_entries_refW): use radio boxes instead of list/clist if small
- number
- of choices
- (create_ctree): handle single click on node opens the node
-
- * my_gtk.pm: create and use gtkset_tip
- (_create_window): XSetInputFocus done only on expose_event of the
- topmost window
- (new): ensure only one modal
-
- * Xconfigurator.pm (main): have an "Ok" button to leave
-
- * install_steps_gtk.pm: use gtkset_tip
- (choosePackagesTree): fix "Show automatically selected packages"
- create and use gtkset_tip
-
- * Makefile:
- - fix wiz_*.png removing
- - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10 warly
-
- * share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10 yduret
-
- * bootlook.pm: grub/lilo mode
-
-2001/04/10 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad network restart
-
- * my_gtk.pm: corrected bad font
-
- * network.pm: get rid of ifcfg-
- minor correction
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: typo
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
- size as the check is done before rounding.
-
- * bootloader.pm (install_grub): altconfigfile only if /boot is not
- reiserfs :-/
-
- * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
- modules.cz)
-
- * install_any.pm (setPackages): also have SOUND set in compssUsersChoice
- based on pciusbtable
-
- * share/compssUsers, share/rpmsrate:
- - SOUND is now a flag
- - AUDIO is the group
-
-2001/04/09 siegel
-
- * tinyfirewall.pm: i18n fixes
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixes of grub installation using hd.img
- fix the fix for loopback mounting of hd.img.
-
- * Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
- * pkgs.pm: changed transaction error management this way: if a transaction
- fails, DrakX
- tries to make as many transaction as there are package that have failed
- to be
- installed (this means one transaction of only one package). This help
- installing
- most package that are correct (as a transaction that failed cause all
- remaining
- package to be not installed).
-
-2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: 8.0rc -> 8.0
-
- * rescue/tree/etc/oem: fix english thanks to Kevin
-
- * standalone/drakgw: do not die when an initscript returns non-0
- (initscripts too buggy)
-
-2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Danish file
-
- * any.pm: changed ISO_8859-1 TO ISO-8859-1
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
- use it for kdm message
-
- * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
- size as the check is done before rounding.
-
- * bootloader.pm (install_grub): altconfigfile only if /boot is not
- reiserfs :-/
-
- * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
- modules.cz)
-
- * install2.pm (main): sets umask (seems like default one is no more 022,
- kernel change?)
-
- * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
- (especially for abnt2 (br))
-
- * install_any.pm (setPackages): also have SOUND set in compssUsersChoice
- based on pciusbtable
-
- * share/compssUsers, share/rpmsrate:
- - SOUND is now a flag
- - AUDIO is the group
-
- * lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09 siegel
-
- * share/po/de.po: fixes
-
- * Xconfigurator.pm: fixed i18n bug
-
-2001/04/09 yduret
-
- * standalone/tinyfirewall: button policy (thx gc)
-
- * standalone/drakgw: deyvounification : remove some un-useful comments in
- code
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected
-
- * standalone.pm: install function now returns the return value of the
- system.
-
- * netconnect.pm: corrected buggy cable
- removed buggy modem screen repetition
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
- applied).
- fixed cancel support.
- added conditional restart of gpm on mouse configuration change.
-
- * fs.pm: removed notail option for reiserfs.
-
- * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
- DrakConf only).
-
- * install_any.pm: added missing package to copy.
-
- * rescue/tree/etc/oem: fixes of grub installation using hd.img
- fix the fix for loopback mounting of hd.img.
- fixed hd.img access right.
- make kernel22 installed for every oem install...
- moved some package to closure instead of installed.
- added some missing packages.
- added nolock option for nfsmount.
- added missing package to copy.
-
-2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
- * mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
- * standalone/drakgw: fix for when there is an already existing rc.firewall
- complies with old format of drakgw so that upgrades will work
-
- * rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * any.pm: changed ISO_8859-1 TO ISO-8859-1
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
- use it for kdm message
-
- * interactive.pm (ask_from_treelistf): make it behaves correctly when
- "cancel" is clicked
-
- * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
- (especially for abnt2 (br))
-
- * install2.pm (main): sets umask (seems like default one is no more 022,
- kernel change?)
- (main): log the umask
-
- * devices.pm (entry): add hd[ijkl]*
-
- * bootloader.pm (install_lilo): better handling of map-drive (there's not
- always only 2 disks!)
-
- * lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09 siegel
-
- * share/po/de.po: fixes
-
-2001/04/09 yduret
-
- * standalone/drakboot: added lilo/grub
-
- * bootlook.pm: added lilo/grub mode
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * modules.pm: removed use install_any
-
- * tinyfirewall.pm: corrected
-
- * netconnect.pm: corrected buggy cable
- removed buggy modem screen repetition
- corrected bad bug when creating new profile
-
- * standalone.pm: install function now returns the return value of the
- system.
-
- * Makefile: removed install_any
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
- applied).
- fixed cancel support.
- added conditional restart of gpm on mouse configuration change.
-
- * rescue/tree/etc/oem: fixed hd.img access right.
- make kernel22 installed for every oem install...
- moved some package to closure instead of installed.
- added some missing packages.
- added nolock option for nfsmount.
- added missing package to copy.
-
- * fs.pm: removed notail option for reiserfs.
-
- * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
- DrakConf only).
-
- * printer.pm: added Till patch for printer (raw queue and PostScript
- queue).
-
- * install_any.pm: added missing package to copy.
-
-2001/04/09 kjx
-
- * share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): log the umask
-
- * interactive.pm (ask_from_treelistf): make it behaves correctly when
- "cancel" is clicked
-
- * devices.pm (entry): add hd[ijkl]*
-
- * bootloader.pm (install_lilo): better handling of map-drive (there's not
- always only 2 disks!)
-
-2001/04/09 yduret
-
- * bootlook.pm: fix, added lilo/grub frame
- fixed till bug
-
-2001/04/08 dam's <damien@mandrakesoft.com>
-
- * rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
- rid of kisdn
-
- * tinyfirewall.pm: updated
- added package installation
-
- * netconnect.pm: get rid of kisdn
- updated
- no more askwarn in wizard mode
- updated
-
- * standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
- netconnect_consts.pm: updated
-
- * standalone/net_monitor: removed Data::Dumper
- typo
-
- * standalone/draknet: updated
- typo
- corrected bad isdn field
-
-2001/04/08 daouda
-
- * share/rpmsrate: increase quanta weight .
-
-2001/04/08 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: correct my mistakes on removing some modules from stage1 and
- stage2 (-> remove only from stage1)
-
-2001/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
- * standalone/net_monitor, netconnect.pm: Some English changes
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Fixed some english typos
- Updated pot file and various po files
-
-2001/04/08 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (write): remove debugging info :-(
-
- * bootloader.pm (suggest): add option "quiet" to the kernel in fb
- (requested by chmou)
-
- * install_steps.pm (afterInstallPackages): remove setting of kde charset
- in kdeglobals (kde is a grown-up now)
-
-2001/04/08 siegel
-
- * share/po/de.po: new german version
- updates
-
-2001/04/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo
- typo
- net_monitor incorporation
-
- * standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po: updated Croatian files
-
- * share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
- share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
- Walloon files
-
-2001/04/07 warly
-
- * share/compssUsers: PCL-CVS release v2_9_9
- Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
- Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
- In directory .:
- Modified compssUsers
- In directory po:
- patched Up-To-Date po/DrakX.pot
- patched Up-To-Date po/ca.po
- patched Up-To-Date po/de.po
- patched Up-To-Date po/hr.po
- patched Up-To-Date po/id.po
- patched Up-To-Date po/it.po
- patched Up-To-Date po/ja.po
- patched Up-To-Date po/ko.po
- patched Up-To-Date po/sp.po
- patched Up-To-Date po/sr.po
- patched Up-To-Date po/vi.po
- patched Up-To-Date po/wa.po
-
- --------------------- End ---------------------
- -- last cmd: cvs -f update -d -P --
-
- * share/rpmsrate: PCL-CVS release v2_9_9
- Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
- Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
- In directory .:
- Modified rpmsrate
-
- --------------------- End ---------------------
- -- last cmd: cvs -f update -d -P --
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: use jeff's suggestions to remove some old stuff
- Sun Happy Meal only for Sparc
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-
- - do not print warning when we are in AUTOMATIC and insmod failed
- because of file-not-found in mar file (raid cards, etc)
- - print "please include msg from Alt-F3" for this warning message to
- ease further support
- - print pci entry of cards found in te logs
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
- mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
- * share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06 siegel
-
- * share/po/de.po: updates
-
-2001/04/06 yduret
-
- * standalone/drakgw: swap cancel/configure button
-
-2001/04/06 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: dead code
-
- * standalone/net_monitor: updated
-
- * netconnect.pm: be quiet
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
- fixed if label does not exists and grub refuse to read.
-
- * install_steps_interactive.pm: fixed typo for cups checking of
- installation.
- fixed "No printer" after configuring cups for remove server.
- added log for CD medium chosen par user.
-
- * pkgs.pm: added killing on child process of transaction that have been
- detached (typically
- with pid > transaction_pid and parent is 1).
-
-2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - correct yvounetification in i18n stuff
- - remove some remaining debugging printings
- - add a bit more of explanations when starting drakgw in wizard mode
-
- * modules.pm: re integrate some TR net cards
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-
- - do not print warning when we are in AUTOMATIC and insmod failed
- because of file-not-found in mar file (raid cards, etc)
- - print "please include msg from Alt-F3" for this warning message to
- ease further support
- - print pci entry of cards found in te logs
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Thai file
- Updated pot file
-
-2001/04/06 yduret
-
- * standalone/drakgw: swap cancel/configure button
-
-2001/04/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: addde tk like routines
-
- * netconnect.pm: be quiet
- correctedInternetAccessTye and ADSLType
-
- * Makefile: iCorrected missing file install_any.pm. pixel sux.
-
- * standalone/draknet2: dead code
-
- * standalone/net_monitor: updated
- updated
- updated
- updated
- updated
- added
-
- * pixmaps/net_d.png, pixmaps/net_c.png: added
-
- * share/logo-mandrake.png: new icon
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
- read.
-
- * install_steps_interactive.pm: fixed typo for cups checking of
- installation.
- fixed "No printer" after configuring cups for remove server.
- added log for CD medium chosen par user.
-
- * pkgs.pm: added killing on child process of transaction that have been
- detached (typically
- with pid > transaction_pid and parent is 1).
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Thai file
- Updated pot file
-
-2001/04/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
- every modules.cz except the
- biggest one
-
- * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
- and use it
-
- * install_any.pm: add write_fstab
- create install_any::write_fstab and use it
-
-2001/04/06 yduret
-
- * bootlook.pm: minor fix
-
- * standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (fs_options): created (gets codepage and iocharset)
-
- * common.pm (if_): better logging of the error
-
-2001/04/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
- every modules.cz except the
- biggest one
-
- * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
- and use it
-
- * install_any.pm: add write_fstab
- create install_any::write_fstab and use it
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakboot:
- - fix getting result of fsedit::hds
- - cleanup
-
- * lang.pm (fs_options): created (gets codepage and iocharset)
-
- * common.pm (if_): better logging of the error
- (getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
- Great
- what?)
-
- * bootloader.pm (install_grub): small fix
- (install_lilo): fix lilo's dumbness (when lilo warns about not the first
- drive, it usually fails)
-
- * diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
- * install_steps_interactive.pm (addUser): default autologin to first user
- in beginner
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (autologin): fix
- ask for autologin
-
- * install_steps_interactive.pm: ask for autologin
- (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
- was used. Better have a look at /proc/cmdline
-
- * bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
- not the first drive, it usually fails)
-
- * pkgs.pm, share/rpmsrate:
- - s/PCI/HW/
- - add rio500
-
- * install_any.pm (kernelVersion): fix enormous stupid typo
-
- * common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
- (but the Great
- what?)
-
- * install_steps.pm (exitInstall): oups, report_bug is no more in
- commands::
-
- * diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
- automatically selected
- packages' to go along with the new description
-
- * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
- (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
- * install_any.pm (kernelVersion): fix enormous stupid typo
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * install_steps.pm (exitInstall): oups, report_bug is no more in
- commands::
- (configureXBefore): fix the xkb verification (was broken for things like
- ``de(nodeadkeys)'')
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * any.pm: ask for autologin
-
- * fs.pm (format_reiserfs): quietly format reiserfs
-
- * commands.pm:
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * install_steps_interactive.pm: ask for autologin
- (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
- was used. Better have a look at /proc/cmdline
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * share/rpmsrate:
- - add ldetect
- - the default Aurora chose is the categorizing one
-
-2001/04/05 siegel
-
- * share/po/de.po: fixed typo
-
-2001/04/05 yduret
-
- * bootlook.pm: fix pablo mess
- install autolgin just if we want to autolog :)
-
-2001/04/05 dam's <damien@mandrakesoft.com>
-
- * ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
- vs msec.
-
- * my_gtk.pm: added gtksize
-
-2001/04/05 fcrozat
-
- * share/rpmsrate: No longer propose nautilus-mozilla (required by
- nautilus)
- propose nautilus-trilobite (for Eazel services)
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
- automatically selected
- packages' to go along with the new description
-
- * commands.pm, install_steps_interactive.pm, install_any.pm:
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * fs.pm (format_reiserfs): quietly format reiserfs
-
- * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
- (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
- * share/rpmsrate:
- - add ldetect
- - the default Aurora chose is the categorizing one
-
- * install_steps.pm (configureXBefore): fix the xkb verification (was
- broken for things like ``de(nodeadkeys)'')
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
-2001/04/05 siegel
-
- * share/po/de.po: fixed typo
-
-2001/04/05 yduret
-
- * bootlook.pm: fix pablo mess
- install autolgin just if we want to autolog :)
-
-2001/04/04 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make sure to insmod parport_probe alone as it is not
- available in 2.4 kernel and
- this this not a problem (silent error).
- added complete callback to check queue name under cups does contains
- only letters, numerics or underscore.
-
- * install_steps_interactive.pm: fixed printer description in summary.
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
- to remove 32 bits depth
- for such card.
-
- * detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
- * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
- some times.
-
- * printer.pm: added die on error of lpadmin.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (tv): add ultracam & usbvideo
- (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
- skip them
- (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
- skip them
-
- * install_any.pm (kernelVersion): cleanup
-
-2001/04/04 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_any.pm: kernelVersion mods for PPC
-
-2001/04/04 daouda
-
- * share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * live_install: unset locale environment for safety
-
- * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
- (needed for live upgrade so
- that error message are not printed)
-
- * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
- some times.
-
- * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
- * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): better handling for tv, photo and scanner
-
- * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
- stage1, so skip them
- - add photo, tv and scanner
- - add pegasus and kaweth modules
-
-2001/04/04 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo
-
-2001/04/04 daouda
-
- * share/rpmsrate: add gatos for ati tv card .
- reput klyx but in lower weight (2)
- removed klyx from rpmsrate (bad idea according to pixel )
- add klyx in install "Office KDE"
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * live_install: unset locale environment for safety
-
- * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
- (needed for live upgrade so
- that error message are not printed)
-
- * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
- * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * install_steps.pm: disable frame buffer for Matrox cards.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): better handling for tv, photo and scanner
-
- * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
- stage1, so skip them
- - add photo, tv and scanner
- - add pegasus and kaweth modules
-
- * share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: keep mount point configuration trhough multi-passes of
- diskdrake and others.
-
- * Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: do not use isSpecial which should only be used on
- partitions
- (main): do not have loopback pseudo hd in hds out of diskdrake
-
- * modules.pm (load_raw): add the require install_any
-
- * share/rpmsrate: restore Aurora (i really don't understand what i've done
- with flag AURORA a month ago) to a simple behaviour
-
- * install_steps_interactive.pm (choosePackages): do not make a special
- case for upgrades (was: select the
- min size, which was on contradiction with profile selection)
-
- * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
- * standalone/mousedrake: fix horrible error (using an undefined $o)
-
- * share/list: add back mkreiserfs
-
- * standalone/XFdrake: don't start xfs if skiptest
-
- * fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
- only true
- hard drives (not pseudo one like raid, loopback and lvm)
-
- * bootloader.pm (suggest): trap strange error. Should not really fix the
- pb
-
- * install_steps.pm (setupBootloaderBefore): nicer Aurora presence
- detetection
-
- * lang.pm (charset): fix for chineese which have charset in the name
-
- * Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
- * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
- dependencies"
-
- * install_any.pm (setPackages): don't preselect profiles in upgrade
- (setPackages): handle Flag:<theflag>
- (setPackages): install kernel22 if install kernel is a 2.2
-
- * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
- (didn't
- propose to format it)
- protect the loading of module lvm-mod
-
-2001/04/03 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
- emulation
-
-2001/04/03 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: a lot of bugfixs
- corrected bad flag test
- corrected bad priority
-
- * standalone/draknet: typo
- bug fixes
- removed debugging messages and Data::Dumper
- corrected bad flag test
-
-2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_raw): add the require install_any
-
- * share/rpmsrate: restore Aurora (i really don't understand what i've done
- with flag AURORA a month ago) to a simple behaviour
-
- * lang.pm (charset): fix for chineese which have charset in the name
-
- * install_steps.pm (setupBootloaderBefore): nicer Aurora presence
- detetection
-
- * Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
- * install_steps_interactive.pm (choosePackages): do not make a special
- case for upgrades (was: select the
- min size, which was on contradiction with profile selection)
-
- * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
- * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
- dependencies"
-
- * install_any.pm (setPackages): don't preselect profiles in upgrade
- (setPackages): handle Flag:<theflag>
- (setPackages): install kernel22 if install kernel is a 2.2
-
- * share/list: add back mkreiserfs
-
- * standalone/XFdrake: don't start xfs if skiptest
-
- * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
- (didn't
- propose to format it)
- protect the loading of module lvm-mod
-
-2001/04/02 dam's <damien@mandrakesoft.com>
-
- * modules.pm: corrected petite's mistake
-
- * netconnect.pm: protecting against non existent files
-
-2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
- comply to all.kernels policy
-
- * tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: Updated Czech file
-
- * lang.pm: codepage option to mount requires only numeric values, eg "437"
- and not "cp437"
- Changed accordingly in the lists
-
- * share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
- install fonts-ttf-thai for Thai locale
-
-2001/04/02 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile: small cleanup for pcmcia_probe.c
-
- * tools/Makefile (install): s/-r/-rf/
-
- * install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
- (setPackages): install imwheel if nbuttons > 3
-
- * c/Makefile.PL: small cleanup for pcmcia_probe.c
- don't use pcmcia_probe.o from stage1, better compile it here, otherwise
- perl-install require mdk-stage1 to do compiled => circular dependency
-
- * Makefile: ignore dams or at least dams errors
-
- * c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/make_rescue_img: fix pixelization (aka take advantage of
- all.kernels/.main)
-
-2001/04/02 Pixel <pixel@mandrakesoft.com>
-
- * tools/Makefile (install): s/-r/-rf/
-
-2001/03/30 Pixel <pixel@mandrakesoft.com>
-
- * tools/Makefile (install): fix the globbing for packdrake.pm and
- rpmtools.pm
-
-2001/03/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/drvinst: test for "Card:" and not install, some videoboards are
- not reported as DISPLAY_VGA :-(
-
- * tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
- mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
- than one boot kernel :-)
-
- * rescue/list.i386: add reiserfsck
-
-2001/03/29 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: bad message at the end if kernel2.4
-
- * netconnect.pm: added missing Device in Ethx when saving/loading
-
- * standalone/draknet: translation
-
-2001/03/28 dam's <damien@mandrakesoft.com>
-
- * standalone/tinyfirewall: typo
-
- * interactive_gtk.pm: corrected pixel shit if embedded
-
- * standalone/draksec: embedded mode
-
- * standalone/draknet: corrected gtkpng in gtkwpm
- added translation
-
- * bootlook.pm: cute button box
-
- * tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28 fcrozat
-
- * share/rpmsrate: gmc is back in standard GNOME install, for people with
- existing home
-
-2001/03/28 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
- standalone XFdrake and mousedrake (multi-mouse and
- correct probe (USB)).
-
- * Xconfig.pm: re-fix mouse fix.
- fixed wrong mouse probe.
- fixed for standalone XFdrake and mousedrake (multi-mouse and
- correct probe (USB)).
-
- * Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
- Finnish, Croatian and Turkish files
-
- * share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
- * share/po/az.po: Updated Azeri and Danish files
-
- * share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
- files
- Updated Finnish, Korean and Slovak files
-
- * share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
- files
- Updated Azeri and Danish files
-
-2001/03/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: add fstab in the log
-
- * interactive_gtk.pm: better default_size setting
-
- * commands.pm: fix typo
- add fstab in the log
-
- * install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28 warly
-
- * share/rpmsrate: add some commercial apps
-
-2001/03/27 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: added kill USR2 before main
-
- * share/help.png: changed help button
-
- * share/help.xpm: changed help
-
- * tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
- * Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
- currently.
-
-2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
- share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
- share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
- Indonesian, Japanese, Korean and Walloon files
- changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: warnAboutNaughtyServers
- (setPackages): default profiles selection to GNOME, KDE, CONFIG
-
- * install_steps_interactive.pm: warnAboutNaughtyServers
- (summary): fix displaying of printer configured
-
- * pkgs.pm: warnAboutNaughtyServers
-
- * install_steps_gtk.pm (installPackages): catch the no png file exception
- (in case warly is dumb again)
-
- * my_gtk.pm: try to fix displaying in draksec
- (create_box_with_title): save the box_size in field "box_size"
-
- * install2.pm, any.pm: remove use of Bastille. get back to the good state
- we had :)
-
- * interactive_gtk.pm: try to fix displaying in draksec
-
- * share/rpmsrate: move back Bastille-Curses-module to CONFIG
- - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
- LOCALES"zh"
- - raise WindowMaker
- - add xfce
- - am-utils is a server
- - raise some stuff in CONFIG to have stuff there
- - remove drakxtools from CONFIG (DrakConf requires drakxtools)
- - DrakConf from 5 to 4
-
- * lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27 siegel
-
- * share/po/de.po: minor typo-fixes
-
-2001/03/27 dam's <damien@mandrakesoft.com>
-
- * share/help.png: changed help button
-
- * share/help.xpm: changed help
-
-2001/03/27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
- postponed at end of install
- and only if rpm-4.0 or above has been installed.
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
- * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
- support for two mice (laptop). The second mice is generally PS/2 as
- probe can says it is present.
-
-2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27 Pixel <pixel@mandrakesoft.com>
-
- * any.pm, install2.pm: remove use of Bastille. get back to the good state
- we had :)
-
- * install_any.pm: warnAboutNaughtyServers
- (setPackages): default profiles selection to GNOME, KDE, CONFIG
-
- * share/rpmsrate: move back Bastille-Curses-module to CONFIG
- - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
- LOCALES"zh"
- - raise WindowMaker
- - add xfce
- - am-utils is a server
- - raise some stuff in CONFIG to have stuff there
- - remove drakxtools from CONFIG (DrakConf requires drakxtools)
- - DrakConf from 5 to 4
-
- * install_steps_interactive.pm: warnAboutNaughtyServers
- (summary): fix displaying of printer configured
-
- * lang.pm (langsLANGUAGE): give the list of languages
-
- * pkgs.pm: warnAboutNaughtyServers
-
- * install_steps_gtk.pm (installPackages): catch the no png file exception
- (in case warly is dumb again)
-
-2001/03/27 siegel
-
- * share/po/i18n_compssUsers: i18n group names
-
- * share/po/de.po: minor typo-fixes
- new german version
-
-2001/03/26 daouda
-
- * share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26 fcrozat
-
- * share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: first attempt at pixelization of code (till's cups
- patches)
-
-2001/03/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
- files
-
- * share/po/vi.po: Updated Croatian, vietnamese and Walloon files
- Updated Portuguese, Swedish and Thai files
-
- * share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
- share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25 Pixel <pixel@mandrakesoft.com>
-
- * http.pm (getFile): verify the return value of the server. If not 200
- (aka Ok),
- return undef
-
- * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
- and libqtcups2 for kups in
- pkg_install_if_requires_satisfied
-
-2001/03/25 siegel
-
- * share/po/de.po: new german version
-
-2001/03/25 fabman
-
- * share/po/es.po: updated spanish .po file
-
-2001/03/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: Updated Korean file
-
- * share/po/sv.po: Updated Swedish file
-
-2001/03/25 Pixel <pixel@mandrakesoft.com>
-
- * http.pm (getFile): verify the return value of the server. If not 200
- (aka Ok),
- return undef
-
- * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
- and libqtcups2 for kups in
- pkg_install_if_requires_satisfied
-
- * any.pm (ask_users): fix dead-loop
-
- * bootloader.pm (suggest): add entry for nt
-
-2001/03/25 siegel
-
- * share/po/de.po: new german version
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po: Updated Vietnamese file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
- is unneeded (and "member" of merge2pcitable
- was clashing)
-
- * any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
- is given.
-
- * install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
- * install_any.pm (disable_user_view): created, takes care of gdm too
- (taken from msec)
-
- * mouse.pm (detect): fix francois... uh, no too hard. easier to fix
- francois's bugs ;pp
-
- * timezone.pm (%l2t): fix for fuzzyChoice
-
- * share/keyboards.tar.bz2:
- - readding with -kb
- - fixing permissions on xmodmap.kr
- remove before adding again with -kb
-
- * modules.pm: have natsemi in network.img
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): fix francois... uh, no too hard. easier to fix
- francois's bugs ;pp
-
- * timezone.pm (%l2t): fix for fuzzyChoice
-
- * modules.pm:
- - add missing modules (now in sync with pcitable)
- - add 'media' class
- - cleanup
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (copy_advertising): fix escaping $f causing perl to
- segfault :-(
- (copy_advertising): handle i18n'ed advertising
-
- * pkgs.pm: cleanup
-
- * modules.pm:
- - add missing modules (now in sync with pcitable)
- - add 'media' class
- - cleanup
-
-2001/03/24 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
- need fixing
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (copy_advertising): handle i18n'ed advertising
-
- * modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
- 2.4
-
-2001/03/23 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed screen id for Device to be present whenever the
- same BusID is used.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * printerdrake.pm: Do not ask to configure a printer if standalone,
- previously only for embended.
-
- * Xconfig.pm: fixed typo for wacom.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
- multiple tablet support (wacom), moved usb probe for mouse and tablet
- at the beginning.
-
-2001/03/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf_no_check): fix the fix fix fix
- (ask_from_listf_no_check): fix the fix fix
-
- * common.pm (formatError): created
-
- * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
- DHCP/BOOTP
-
- * diskdrake.pm (try): format the error (no more "at line ...")
- (Add2LVM): "new" was not i18n'ed
-
- * install_steps_interactive.pm (exitInstall): no "cancel" button
-
- * partition_table.pm: add Empty to bad_types
-
- * fsedit.pm (change_type): When changing a partition type from ext2fs to
- Linux RAID
- (or LVM), the mount point should be removed.
-
-2001/03/23 siegel
-
- * share/po/de.po: new german version
-
-2001/03/23 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected bad translation
- correctedd typo
- updated
- code cleaning
- tinyfirewall now works.
-
- * Makefile.config: added tinyfirewall
-
- * any.pm, mouse.pm: added /dev/modem in modem list selection
-
- * standalone/drakxconf: added tinyfirewall entry
-
- * standalone/tinyfirewall: added update code
- updated wrapper to launch tinyfirewall in embedded mode
-
- * netconnect.pm: added /dev/modem in modem list selection
- netconnect doesn't write the file 1
-
-2001/03/23 fcrozat
-
- * share/rpmsrate: nautilus-mozilla and xalf are installed by default in
- GNOME
- gmc is not installed by default in GNOME
- gabber gaim are moved to instant messaging
- gcombust in moved to GNOME CD burner
- gtm is installed by GNOME/File transfer
- mozilla is installed by default as www browser
- galeon is installed by default as www browser for GNOME
-
-2001/03/23 François Pons <fpons@mandrakesoft.com>
-
- * tools/syncrpms: added size-stamp test to copy identical file in version,
- release.
-
- * Xconfig.pm: fixed typo for wacom.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
- for mouse and tablet
- at the beginning.
- fixed wrong usage of Screen keyword in Device section, should be present
- and
- reseted for any multi head card with only one BusID.
-
- * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
- multiple tablet support (wacom), moved usb probe for mouse and tablet
- at the beginning.
-
-2001/03/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
- Updated Finnish file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: ifix the dams stuff
-
- * install_steps_interactive.pm (exitInstall): no "cancel" button
-
- * share/po/i18n_compssUsers: fix for better compliance with po format
-
- * netconnect.pm: ifix the dams stuff
- cleanup and enable gzip'ed isdn.db
-
- * Makefile: gzip ldetect-lst files
-
- * modules.pm: add i810_audio (still need a script to add missing one and
- keep in sync)
-
- * bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
- * interactive.pm (ask_from_listf_no_check): fix the fix fix fix
- (ask_from_listf_no_check): fix the fix fix
- (ask_from_listf_no_check): fix the bad fix
-
- * common.pm (formatError): created
- (openFileMaybeCompressed, catMaybeCompressed): added
- (getVarsFromSh): take care of comments
-
- * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
- DHCP/BOOTP
-
- * partition_table.pm: add Empty to bad_types
-
- * mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
- * fsedit.pm (change_type): When changing a partition type from ext2fs to
- Linux RAID
- (or LVM), the mount point should be removed.
-
- * detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
- (isFloppyOrHD): floppy type is 'fd', not 'floppy'
- (stringlist): nicer (a la new lspcidrake)
-
- * Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
- MonitorsDB
-
- * diskdrake.pm (try): format the error (no more "at line ...")
- (Add2LVM): "new" was not i18n'ed
-
-2001/03/23 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
- use vmlinux for PPC
- prepend of_dev to initrd stanza in yaboot.conf
- add 1-button mouse for PPC
-
-2001/03/23 siegel
-
- * share/po/de.po: new german version
-
-2001/03/22 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
- Add 8139 grub stage.
-
-2001/03/22 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected mapn
-
- * standalone/draknet: removed use Data::Dumper
-
- * netconnect.pm: removed mail informat oin
- comment update
-
- * tinyfirewall.pm: removed use Data::Dumper
- working on tinyfirewall
-
-2001/03/22 fabman
-
- * share/po/es.po: changed "swap" for "intercambio" in the spanish .po
- files
- updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed wrong access to undefined value promoted to
- empty array reference.
-
-2001/03/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c, mdk-stage1/tools.h:
- - fix detection of more than 3 scsi attached devices
- - cleaner code for cmp of ptr against static strings
-
-2001/03/22 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake: remove test ugliness of dams
-
- * c/Makefile.PL: no pcmcia_probe in drakxtools
-
- * modules.pm (load_thiskind): indent as it should be
-
- * install_steps_interactive.pm (generateAutoInstFloppy): fix the message
- which was uptodate only for
- sparc :-(
-
- * Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
- have been mace
-
-2001/03/22 yduret
-
- * bootlook.pm: mapn works tx dams
- nmap
- added mapn fun to reduce code.. testing it
- added install of rpm
- xpm png files
-
- * pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
- pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
- pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21 dam's <damien@mandrakesoft.com>
-
- * standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
- * netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm: added pci id reference.
-
- * c/stuff.xs.pm: added support for pci id extraction.
-
- * Xconfigurator.pm: fixed wrong XFree4 version reference.
- fixed null string in monitor identifier.
- added multi-head support in XFdrake.
-
-2001/03/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: honour embedded mode
-
- * share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
- mounting..) from Internet
- Station to Network Computer
-
-2001/03/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
- Croatian and Serbian files
-
- * share/po/sp.po, share/po/sr.po: Updated Serbian files
- Updated Croatian and Serbian files
-
- * share/po/az.po: Updated Azeri file
- Updated Croatian and Serbian files
-
- * share/po/sk.po: Updated Azeri and Slovak files
- Updated Croatian and Serbian files
-
- * lang.pm: Added fields to charsets table holding info for mount
- (iocharset and
- codepage mount options)
-
-2001/03/21 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
- * share/rpmsrate: move webmin to CONFIG
- remove ipchains and iptables, raise gfcc
-
- * docs/README: add cvs howto
-
- * install_steps_interactive.pm (summary): fix
-
- * detect_devices.pm: old code
-
- * bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
- doesn't like them
- (add_kernel): cleanup
- (suggest): make it work with kernel22-secure and no kernel22
-
- * modules.pm (when_load): move the alias sound to when_load, don't check
- ppc as it
- could be used for non-ppc
- (load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
- every
- load_thiskind, not only scsi one
-
- * c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21 siegel
-
- * share/po/de.po: new german version
- new german version
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (@drivers_by_category): if_ization
- (load_thiskind): cleanup
-
-2001/03/21 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (add_kernel): cleanup
- (suggest): make it work with kernel22-secure and no kernel22
-
- * share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: no wizard if warning
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix pcmcia functions only on x86
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
- * modules.pm (@drivers_by_category): if_ization
- (load_thiskind): cleanup
-
- * any.pm, install2.pm, share/rpmsrate: use bastille backend
-
- * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
- * install_steps.pm, install_any.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
-2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
- routine for - PPC
- any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
- install_steps_interactive: setup dmasound - PPC
- modules.pm: load Mac hardware modules - PPC
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
- for net_cnx_*
-
- * interactive.pm: no wizard if warning
-
- * standalone/draknet: added update after {dis}connecting
-
-2001/03/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * diskdrake.pm: fix formatting of raid
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: use bastille backend
- - add nautilus
-
- * install_steps_interactive.pm: fix pcmcia functions only on x86
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
- (setupSCSI): don't pcmcia_probe if testing
- - tellAboutProprietaryModules moved to setupSCSI
- - miscellaneous step re-enabled, called Security
- - pcmcia_probe moved to setupSCSI, skipped in noauto
-
- * any.pm: use bastille backend
-
- * install2.pm: use bastille backend
- - tellAboutProprietaryModules moved to setupSCSI
- - miscellaneous step re-enabled, called Security
- - pcmcia_probe moved to setupSCSI, skipped in noauto
- have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
- parameter any more)
-
- * netconnect.pm (modem_detect_backend): cleanup
-
- * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
- have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
- parameter any more)
-
- * Makefile: install cardmgr
-
- * install_any.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
- (setPackages): install usbd in case of usb
-
- * install_steps.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
-2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
- detect_devices.pm: forgot to remove commented code after test
- netconnect.pm: load macserial module for PPC
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet, netconnect.pm: improved connection windows, and
- loading / saving of /etc/sysconfig/network-scripot/netècnx*
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate:
- - add nautilus
-
- * install_any.pm (setPackages): install usbd in case of usb
-
- * Makefile: install cardmgr
-
-2001/03/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * fsedit.pm: fix loopback appearing twice in format partition
-
- * diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated korean file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (computeGroupSize): fix hacks, better hacks
- (saveCompssUsers): fix
-
- * install_steps_interactive.pm (chooseGroups):
- - make the computed size work
- - unselectAll when a profile is unselected
-
- * interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
- scrolls
-
-2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected graphical layout for newbies
-
- * netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated korean file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (computeGroupSize): fix hacks, better hacks
- (saveCompssUsers): fix
-
- * share/rpmsrate:
- - add rxvt-CJK
- - exchange xterm and rxvt
- - move bc from SCIENCES to SYSTEM
-
- * interactive_newt.pm (ask_from_entries_refW):
- - ensure the width is less than $width - 7 (in french and 80x25, the
- treelist was too big)
- - if term is very big, use 10 lines instead of 5
- - if no button is asked, but one in any case otherwise it's buggy
-
- * install_steps_interactive.pm (chooseGroups):
- - make the computed size work
- - unselectAll when a profile is unselected
-
- * interactive.pm (ask_from_listf_no_check): fix fix
- (ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
- hd-install when you provide a not valid ISO (cd #2 for example)
-
- * mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
- mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
- * mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
- * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
- editing ask_from_entries in stdio mode
-
- * mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
- * install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
- * share/rpmsrate: add gpm & evolution
-
-2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
- work with dietlibc
-
- * mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
- for testing purposes..
-
- * mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
- mkinitrd package release
-
- * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
- editing ask_from_entries in stdio mode
-
-2001/03/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
- * share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
- keyboard
-
- * keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
- * install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
- * share/rpmsrate: add gpm & evolution
-
-2001/03/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/Makefile: refine deps
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
- mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
- * mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
- * share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
- * diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
- * modules.pm (write_conf): better logging
-
- * c/stuff.xs.pm: add from_utf8
-
- * c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
- description
-
-2001/03/16 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
- tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
- mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
- gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
- remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: SiS card are no more prefered for XF3.
- added standalone support to prefer XF3 or XF4 to
- keep current used server version.
-
- * standalone/XFdrake: remove duplicate begin label.
- take care of existing configuration.
-
-2001/03/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: skip dc395x_trm on stage1
- dc395x_trm is back in 2.4
-
- * share/compssUsers: try to enhance
-
-2001/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2001/03/15 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
- this is not needed anymore :)
-
-2001/03/15 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
- tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
- tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
- mkhybrid-1.12b5.4, yaboot: create PPC CD
-
- * install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
- bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
- temporary file read/write per Pixel
-
- * Xconfigurator.pm: force 1024x768 on Powerbook
-
- * tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: changed label + profile before types..
-
-2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po,
- share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
- share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
- corrected the script and updated po files
-
-2001/03/14 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: keep only one Development entry
-
- * install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
- * bootlook.pm: fix for perl2fcalls
-
- * install_steps_interactive.pm (chooseGroups): disable the size display as
- it is wrong (for the beta2)
-
-2001/03/14 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm,
- partition_table_mac.pm, bootloader.pm: fix bootstrap partition
- creation/tracking
- allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14 siegel
-
- * share/po/de.po: new german version
-
-2001/03/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: changed label + profile before types..
-
-2001/03/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed unselect management of choice, propagate unselection
- correctly to all
- packages requiring unselected package.
-
- * install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po, share/po/nl.po: updated Norwegian file
-
- * share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
- share/fonts.tar.bz2: new fonts and locale files
-
- * share/po/ko.po: Fixed email of Korean translator
- updated Korean file
-
- * install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
- completed language list
- completed language->keyboard guessing list
- aesthetic changes to an English message (removed \n and let gtk+
- do the formatting, it is nicer)
-
- * share/po/az.po: Updated Azeri file
-
-2001/03/14 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: fix the compssUsers interpretation
- (readCompssUsers): change the key of compssUsers, added "label"
- (computeGroupSize): fix bug
- (computeGroupSize): fix logging
-
- * share/gconv.tar.bz2: moved to share/list
-
- * bootlook.pm: fix for perl2fcalls
-
- * share/rpmsrate: CLIENT & SERVER is prohibited
-
- * timezone.pm:
- - add many timezones
- - defaults to GMT
- - verifier added
-
- * install_steps_gtk.pm: fix the compssUsers interpretation
- (choosePackagesTree): fix
-
- * common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
- the number
- of matched words/characters
-
- * share/compssUsers: keep only one Development entry
- CLIENT & SERVER is prohibited
-
- * install_steps_interactive.pm (chooseGroups): disable the size display as
- it is wrong (for the beta2)
- (chooseGroups): add path for seperating groups, use "label" for the
- group text
-
- * Makefile: remove gconv
-
-2001/03/13 siegel
-
- * share/po/de.po: Fixed typos.
-
-2001/03/13 siegel
-
- * share/po/de.po: Fixed typos.
-
-2001/03/13 dam's <damien@mandrakesoft.com>
-
- * share/help.png: changed
-
-2001/03/13 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
- for the tree
-
- * standalone/drakgw: pixelization
-
- * share/rpmsrate: HDF can't be at the beginning of the line or it will be
- taken as a flag
- moved icewm to SYSTEM with !KDE !GNOME
-
- * pkgs.pm: compss is deprecated. use compssUsers for the tree
- (readCompssUsers): get the "path"
-
- * install_steps.pm: compss is deprecated. use compssUsers for the tree
- renamef created and used
-
- * detect_devices.pm (burners): don't use cdroms() which return scdX for
- ide burners, and
- isBurner don't use the same technique. so use get() and grep for type
- "cdrom"
-
- * install_any.pm: compss is deprecated. use compssUsers for the tree
- (setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
- renamef created and used
-
- * install_steps_interactive.pm: compss is deprecated. use compssUsers for
- the tree
- (chooseGroups): fix to get back the icons
- (chooseGroups): size computed should work
-
- * common.pm: renamef created and used
-
-2001/03/13 siegel
-
- * share/po/de.po: new german translation
-
-2001/03/13 warly
-
- * share/compssUsers: fix {W,w}orkstation
- remove ^Server and ^Development
-
-2001/03/13 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakgw: pixelization
-
- * install_steps_interactive.pm (chooseGroups): size computed should work
-
- * share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
- * install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12 dam's <damien@mandrakesoft.com>
-
- * Makefile: removed wizard pixmap from install
-
- * pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
- added pixmap for wizard
-
- * my_gtk.pm: new wizard layout, with pixmaps.
- added ugly workaround for ugly Hseparator
-
- * share/step-red.png, share/step-orange.png, share/step-orange-click.png,
- share/step-green-click.png, share/step-green.png, share/step-red-on.png,
- share/step-orange-on.png, share/step-green-on.png,
- share/step-green_s.png, share/step-red-click.png: removing bad png
- files...
-
- * share/help.png: new help button. blah
-
- * install_any.pm: typo
-
- * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
- * netconnect.pm: corrected askokcancel -> askyesorno
-
- * interactive.pm: corrected bad okcanel in wizard mode
-
- * install_steps_interactive.pm: added $::isInstall
-
- * share/logo-mandrake_trans.png: new logo for other themes
-
- * services.pm: removed use Data::Dumper
- corrected bug in display
-
-2001/03/12 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
- live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
- work for other
- combination but not tested. fixed locale usage and gtk environment
- interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
- created LD_LOADER environment variable to keep track of right ELF loader
- to be used for the GLIBC used by the live update. added internal PATH
- to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - make it work as a wizard
- - make it work with iptables (kernel-2.4)
-
- * modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
- share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
- share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
- file
-
-2001/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): save the compssUsers flattened
- for rpmdrake
-
- * install_steps_interactive.pm (summary): remove 'clicked' (labels are
- used)
- put everything in %compssUsers, use field flags for the flags :)
-
- * pkgs.pm (computeGroupSize): log what is found
- (saveCompssUsers): make it work
- (readCompssUsers): clean-up
- (saveCompssUsers): created
- put everything in %compssUsers, use field flags for the flags :)
- (computeGroupSize): created
-
- * share/rpmsrate: lower Zope (anyway Zope is not in main)
-
- * fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
- * commands.pm (loadkeys): created
-
- * install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
- (setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
- don't use kernel-secure as a kernel-smp.
- put everything in %compssUsers, use field flags for the flags :)
- (setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
- * interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
- add "label" type
-
- * share/compssUsers: change the path format
-
- * detect_devices.pm (get_mac_model): fix for perl2fcalls
-
- * interactive.pm: add "label" type
-
-2001/03/12 warly
-
- * share/compssUsers: add some NETWORKING_* that were empty
- dispach some DEVELOPMENT and SERVER to more appropriate groups
- added path
-
- * share/rpmsrate: add some NETWORKING_* that were empty
- dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
- graphic card
-
-2001/03/11 dam's <damien@mandrakesoft.com>
-
- * services.pm: no more restart button
-
-2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (summary): fix clicked empty handler
-
- * share/rpmsrate:
- - lower tftp-server
- - a lot of modifs (thanks to Prana)
-
-2001/03/10 dam's <damien@mandrakesoft.com>
-
- * standalone/drakxservices: embedded mode
-
- * my_gtk.pm: added gtkset_border_width
- typo again
- typo
- added gtkmove
- added gtkset_modal and gtkappenditems
-
- * services.pm: fixed big bug.
- imajor improvement.
- improved.
-
-2001/03/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Korean file
-
-2001/03/09 dam's <damien@mandrakesoft.com>
-
- * standalone/drakxconf: added harddrake
-
- * my_gtk.pm: applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
- added gtkradio
-
- * bootlook.pm: workaround for the graphical layout.
-
- * install_steps_gtk.pm: applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
-
- * printerdrake.pm: if embedded -> no first question
-
- * interactive_gtk.pm: added tooltips to create_boxradio
- applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
-
-2001/03/09 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: a hell lot of modifications, mostly cleanup of
- DEVELOPEMENT
-
-2001/03/09 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: keyboard mapping for PPC
-
- * detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: added gtkradio
-
- * standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (read_rpmsrate): handle the special case of packages requiring
- locales-*,
- adding the flag LOCALES"*" for them
-
- * install_steps_interactive.pm (choosePackages): moved the log to
- install2::choosePackages (to have it in
- auto_installs too)
-
- * install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
- * install2.pm (choosePackages): log groups choosen
-
- * share/rpmsrate: a hell lot of modifications, mostly cleanup of
- DEVELOPEMENT
- - chineese packages
- - move Aurora's to AURORA (DrakX take care of Aurora)
-
- * install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * verify_c: fix the regexp
-
- * detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: applied if__
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * verify_c: fix the regexp
-
- * share/rpmsrate: add i18n'ed packages
-
- * detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * common.pm: added if__
-
- * netconnect.pm: applied if__
-
-2001/03/08 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: avoid using e2fsck, else it abort by checking partition
- size (which differs).
- fix resize ext2 by using resize2fs.
-
- * pkgs.pm: changed choice of package for selection.
-
- * share/list: added resize2fs and dumpe2fs, removed ext2resize which is
- replaced.
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
- honoured by kernel
-
-2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: advertising modifs
- (setPackages): use burners instead of IDEburners
-
- * bootloader.pm: cleanup
-
- * interactive.pm (ask_from_listf_no_check): catch wizcancel and return
- undef
-
- * fs.pm (write_fstab): change again for 'none' checking the mount point
- (write_fstab): special case for device ``none'' (which can be mounted
- twice or more :)
-
- * my_gtk.pm (_create_window): on delete_event, destroy the window and
- raise wizcancel
-
- * share/po/fr.po: fix bad translation
-
- * share/rpmsrate: add i18n'ed packages
- raise kdebase
-
- * install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
- * detect_devices.pm: cleanup
- (isBurner): use syslog to detect scsi burners
-
-2001/03/08 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
- * partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad pci number -> string
-
-2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
- Bulgarian, Catalan and Serbian files
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (dev2grub): better error reporting
-
- * tools/cvslog2changelog.pl (%users): add stew
-
- * install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
- * share/rpmsrate: raise kdebase
- xcdroast is the best cd burner ui, raise it above others
- lower some EDITORS
- raise vim-X11
- lower xrn, raise pan
-
- * install_any.pm (setPackages): use burners instead of IDEburners
- (setPackages): at least set BURNER for ide burners
-
- * any.pm: cleanup
-
- * install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
- but always hidden (aka automatic)
-
- * detect_devices.pm (isBurner): use syslog to detect scsi burners
-
- * fs.pm (write_fstab): special case for device ``none'' (which can be
- mounted
- twice or more :)
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
- (without mem=)
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad pci number -> string
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
- (without mem=)
-
-2001/03/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected default focus after detection
- don't test adsl if net install
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): remove the alias block-major-11 as it's
- overriding the
- default alias to sr_mod, and is uneeded with scsi_hostadapter being
- added
- to /etc/modules.conf
-
- * share/rpmsrate: lower heartbeat
-
-2001/03/07 sbenedict
-
- * help.pm: * perl-install/help.pm - typo in yaboot help
-
- * any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
- bootloader menu, need image/boot in rec mode PPC
- CVl:
- ----------------------------------------------------------------------
-
- * devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm, bootloader.pm: fixed support for other kernel for
- bootloader entries.
- automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
- * Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
- * pkgs.pm: added support for killing all child process of a transaction,
- necessary to be
- able to umount cdrom and eject it correctly.
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: use gb16fs instead of gb16st
-
- * modules.pm (add_alias): remove the alias block-major-11 as it's
- overriding the
- default alias to sr_mod, and is uneeded with scsi_hostadapter being
- added
- to /etc/modules.conf
-
- * share/rpmsrate: lower heartbeat
- lower Mesa's rate
-
- * install2.pm (main): save $@ in $err so that it's not modified before
- being used
-
- * share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
- packdrake
-
- * standalone/drakboot: make it please perl2fcalls
-
-2001/03/07 sbenedict
-
- * bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
- XF4 for PPC in recommended mode
- * perl-install/bootloader.pm - rework get_of_dev to work in live install
-
- * install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
- perl-install/any.pm - change in partition_table_mac'xxx syntax
- * perl-install/install_steps_interactive.pm - change in
- partition_table_mac'xxx syntax
-
- * perl-install/partition_table_mac.pm - change in
- partition_table_mac'xxx syntax
-
-2001/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: use gb16fs instead of gb16st
-
- * fsedit.pm: fix typo
-
- * install2.pm (main): save $@ in $err so that it's not modified before
- being used
-
- * share/rpmsrate: lower Mesa's rate
-
- * standalone/drakboot: make it please perl2fcalls
-
-2001/03/06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad %intf while savung
- don't ask configuration if expert
- now detecting adsl
-
- * standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: fix save of automatic stage1 info for static network
-
- * mdk-stage1/init.c: do not display from syslog msg's from RPM telling
- that it
- installed/removed some pkg's
-
- * mdk-stage1/Makefile: fix includes for init
-
-2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
- file
-
-2001/03/06 Pixel <pixel@mandrakesoft.com>
-
- * perl2fcalls:
- - small fix for bootlook.pm
- - don't display reused
-
- * detect_devices.pm (stringlist): if no text description, display ids
-
- * install_steps_interactive.pm (generateAutoInstFloppy): comment old code
- (summary): fixes
- (setupSCSI): cleanup
- (summary): display sound/tv/isdn cards found
-
- * fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
- (@suggestions_mntpoints): add /boot
-
- * install_any.pm: hack to make perl2fcalls happy
- (getHds): fix for no hd detected in newbie installs
- (setPackages): s/snd-slot/sound-slot/
-
- * install_steps_auto_install.pm (@graphical_steps): add
- beforeInstallPackages so that advertisings are there
-
- * install2.pm (setupSCSI): remove autoSCSI, cleanup
-
- * http.pm, ftp.pm: don't use install_any
-
- * modules.pm: add cciss
-
- * partition_table.pm (add): create 3 primaries before creating an extended
- if DAC960 (/dev/rd/*)
- (add): max number of parts for rd, ida and cciss
-
-2001/03/06 yduret
-
- * bootlook.pm: pixelisation
-
-2001/03/06 dam's <damien@mandrakesoft.com>
-
- * install2.pm: corrected bad file search
- corrected intf setting
-
- * standalone/draknet: added enable/disable networking button.
-
- * standalone/drakxconf: updated to be launched frome DrakConf if no
- DISPLAY
-
- * netconnect.pm: now detecting adsl
- typo
- better load_conf
-
- * Xconfigurator.pm: cleaned png displaying
-
- * common.pm: setinhash -> set_in_hash
- added setinhash
-
- * fs.pm: typo
- use set_in_hash
-
-2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
- mode
-
- * mdk-stage1/Makefile: fix includes for init
-
-2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: corrected some typos, Updated Japanese file
- updated Lithuanian file
-
- * help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
- any::runlevel
-
- * partition_table.pm (add): max number of parts for rd, ida and cciss
-
- * fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
- * diskdrake.pm (Create): pixelization
-
- * fsedit.pm (hds): pixelization
-
- * install_steps_auto_install.pm (@graphical_steps): add
- beforeInstallPackages so that advertisings are there
-
- * modules.pm: add cciss
-
- * install2.pm (main): remove unloading vfat (not needed anymore with
- mdk-stage1)
-
-2001/03/05 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
- * Makefile: added pixmaps copying
-
-2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use
- generate_automatic_stage1_params
-
- * c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
- * install_any.pm (generate_automatic_stage1_params): replace
- generate_ks_cfg
-
-2001/03/05 dam's <damien@mandrakesoft.com>
-
- * Makefile: added pixmaps copying
-
- * standalone/draknet: required gtk only if needed, added redirection to
- newt if needed
-
- * netconnect.pm: $mouse->{device} is set if it doesn't exists.
- corrected short circuit if network install
- corrected bad end message,
- added copying of resolv.conf & modules.conf
-
- * install2.pm: moved askrootpasswd and adduser before network conf
-
- * network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
- install2.pm now
- removed setdefaultroute and sethostname
-
-2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm (lv_create): fix typo
-
- * bootloader.pm: add use devices
- (install_grub): ensure the translated messages are not too big the hard
- way
-
- * install_any.pm (generate_automatic_stage1_params): replace
- generate_ks_cfg
- (install_urpmi): have "use hdlist ..." in any case
-
- * my_gtk.pm: XSetInputFocus now done in perl-GTK
- (_create_window): don't care about c::XSetInputFocus not existing
-
- * any.pm (setupBootloader): pixelization
- (setupBootloader): fix call to get_append
-
- * interactive.pm (vnew): cleanup
-
- * common.pm (salt): cleanup
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use
- generate_automatic_stage1_params
-
- * c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
- * c/Makefile.PL: compile fix
-
- * diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
- * Xconfigurator.pm (xtest): use external xtest if standalone
-
- * install2.pm (main): remove unloading vfat (not needed anymore with
- mdk-stage1)
-
-2001/03/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
- * share/rpmsrate:
- - remove autologin
- - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04 stew <sbenedict@mandrakesoft.com>
-
- * any.pm - changes to enable yaboot configuration for PPC
-
- * diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
- * install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
- install_interactive.pm, install2.pm: small fixes for LVM
-
- * diskdrake.pm: don't default the LVM name to 'pp' ;pp
- small fixes for LVM
-
-2001/03/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: small fixes for LVM
- (doPartitionDisksAfter): small adaptation for LVMs
- use run_or_die
-
- * fsedit.pm: small fixes for LVM
- (hds): detect LVMs and return them
- (add): handling of LVMs
- (@partitions_signatures): add new magic of reiserfs
-
- * bootloader.pm: use run_or_die
-
- * run_program.pm (run_or_die, rooted_or_die): created
-
- * install_steps_interactive.pm: cleanup
-
- * install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
- (setPackages): ask for installation of package lvm when needed
- (suggest_mount_points, find_root_parts): take $fstab as arg instead of
- $hds
-
- * install2.pm: small fixes for LVM
- (formatPartitions): call vgscan if needed when / is mounted
-
- * devices.pm (make): better caller in error
-
- * share/list: add progs for LVM handling
-
- * install_interactive.pm: small fixes for LVM
-
- * diskdrake.pm: small fixes for LVM
- - addition of drive to notebook cleaned
- - various clean-up
- - handling of LVMs
-
- * standalone/diskdrake: small fixes for LVM
- small adaptation
-
- * lvm.pm: small fixes for LVM
- creation
-
- * partition_table.pm: add isLVMBased
-
-2001/03/02 stew <sbenedict@mandrakesoft.com>
-
- * commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
- * install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
- * install_interactive.pm - pdisk vs. fdisk - PPC
-
- * bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02 stew <sbenedict@mandrakesoft.com>
-
- * c/smp.c -stanza for PPC
-
- * detect_devices.pm - added code for MO devices
-
- * help.pm - help information for yaboot - PPC
-
- * partition_table.pm - PPC mods
-
- * partition_table_mac.pm - PPC mods
-
- * modules.pm - PPC mods - parallel port not used
-
- * diskdrake.pm - PPC mods - display like pdisk
-
- * install2.pm - PPC mod - no bootdisk
-
- * fs.pm - bootstrap partition - PPC
-
-2001/02/27 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: pop up a dialog to quit X when accepting
- configuration
-
-2001/02/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
- * devices.pm (entry): add fd0H1440 and fd1H1440
-
- * bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
- created
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
- pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
- * Makefile: typo
- new pixmap policy
-
- * bootlook.pm: typo
- new pixmap policy
- need to be merged with bootloader
-
- * standalone/draknet: reincluded Gtk + init Gtk
- thiskind -> thiskind_backend
- new pixmap policy
-
- * standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po,
- share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
- script to produce a correct pot file
- Updated Estonian and Walloon files
-
- * bootlook.pm: changed I_() to _() so xgettext cna find the translatable
- strings
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakgw: pixelization
-
- * install_steps.pm: remove unneeded "use install_interactive"
-
- * install_steps_gtk.pm (copy_advertising): fix changing for
- advertising_images
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: should correct bad resolv.conf when swithcinf in
- standalone embedded mode. Not Certified
- fixed standalone edition
- corrected wizard mode.
-
- * Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
- policy
-
- * standalone/draknet: new pixmap policy
- fixed standalone edition
-
- * bootlook.pm: need to be merged with bootloader
-
- * interactive_gtk.pm: if wizard, show the button
-
- * standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (if_): fix for use in scalar context
-
- * install_steps_interactive.pm (summary): translate mouse description
-
- * install_steps.pm: remove unneeded "use install_interactive"
-
- * install_steps_gtk.pm (copy_advertising): fix changing for
- advertising_images
-
-2001/02/26 warly
-
- * share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: if wizard, show the button
-
- * netconnect.pm: corrected wizard mode.
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (if_): fix for use in scalar context
-
- * install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
- * netconnect.pm: profile handling.
- profile handling
- corrected wizard.
-
- * standalone/draknet: profile handling.
- profile handling
-
- * install_steps_interactive.pm: updated
-
-2001/02/25 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the load_deps before all the loadO's
-
- * install_any.pm (g_auto_install): have formatMountPartitions graphical if
- $graphical
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
- for replay
-
- * interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
- center the chosen value
-
-2001/02/24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install2.pm: move writing to config files from
- install2::selectKeyboard to install_steps
-
- * share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
- the CVS since the current cooker version is too recent
-
- * commands.pm (more): handle 'q' to quit
-
-2001/02/24 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile (stuff): fix the fix's fix :'-(
-
- * detect_devices.pm (pci_probe): fix to clean the log
-
- * install_steps_interactive.pm (setRootPassword): NIS server must be
- editable
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_auto_install): handle $replay flag. It means a 'not
- fully automated install'.
-
- * install_steps_auto_install.pm (@graphical_steps): specify which step
- should be interactive
-
- * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
- * install_steps.pm (afterInstallPackages): no kdm UserView in NIS
- (configurePrinter): if_'ization
-
- * install_steps_interactive.pm (exitInstall): ask wether Replay or
- Automated
- (generateAutoInstFloppy): handle $replay flag. It means a 'not fully
- automated install'.
- (summary): nicer mouse name
-
-2001/02/23 dam's <damien@mandrakesoft.com>
-
- * network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
- layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added accessor the rpmsrate data of packages.
- avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
- * rescue/make_rescue_img: removed kernel_reread program.
-
- * rescue/tree/etc/oem: removed server from selection.
- added mutli CD support to OEM (NFS/DVD transparent)
- fixed selection of package now select much more than before.
- fixed root partition size set to the minimum.
-
-2001/02/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
- needed
-
- * install_steps_auto_install.pm (@graphical_steps): specify which step
- should be interactive
-
- * c/stuff.xs.pm: hack for macroporcessing in term.h
- use C_DRAKX
-
- * install_steps.pm (afterInstallPackages): no kdm UserView in NIS
- (configurePrinter): if_'ization
-
- * share/rpmsrate: add packages installed on demand by DrakX. they are
- specifically flagged
- or flagged 'INSTALL'
-
- * perl2fcalls: handling of ``package''->import(``what to import'')
-
- * interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
- * Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
- * install_any.pm (g_auto_install): handle $replay flag. It means a 'not
- fully automated install'.
-
- * c/Makefile.PL: use C_DRAKX
-
- * pkgs.pm (setSelectedFromCompssList): fix the fix
-
- * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
- add setting C_DRAKX to 1 by default
-
- * install_steps_interactive.pm (exitInstall): ask wether Replay or
- Automated
- (generateAutoInstFloppy): handle $replay flag. It means a 'not fully
- automated install'.
- (summary): nicer mouse name
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): double clicking on list
- means 'Ok'
-
- * pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corected infinite loop
-
-2001/02/22 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
- brand new version written in perl, support repartitionning on the fly of
- the
- hard disk and resize of already present FAT partition.
-
- * rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
- more cleaner (added dependancy).
- added missing file for rescue to enable new oem install.
-
-2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-modutils/include/elf_hppa64.h,
- mdk-stage1/insmod-modutils/util/alias.h,
- mdk-stage1/insmod-modutils/util/xstrcat.c,
- mdk-stage1/insmod-modutils/util/gzfiles.c,
- mdk-stage1/insmod-modutils/include/elf_arm.h,
- mdk-stage1/insmod-modutils/util/sys_qm.c,
- mdk-stage1/insmod-modutils/util/modstat.c,
- mdk-stage1/insmod-modutils/obj/obj_sparc.c,
- mdk-stage1/insmod-modutils/include/elf_m68k.h,
- mdk-stage1/insmod-modutils/Makefile,
- mdk-stage1/insmod-modutils/util/xstrdup.c,
- mdk-stage1/insmod-modutils/obj/obj_arm.c,
- mdk-stage1/insmod-modutils/obj/obj_m68k.c,
- mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
- mdk-stage1/insmod-modutils/include/elf_sparc64.h,
- mdk-stage1/insmod-modutils/util/sys_dm.c,
- mdk-stage1/insmod-modutils/include/elf_s390.h,
- mdk-stage1/insmod-modutils/obj/obj_s390.c,
- mdk-stage1/insmod-modutils/util/xmalloc.c,
- mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
- mdk-stage1/insmod-modutils/util/xftw.c,
- mdk-stage1/insmod-modutils/include/elf_i386.h,
- mdk-stage1/insmod-modutils/util/sys_gks.c,
- mdk-stage1/insmod-modutils/util/snap_shot.c,
- mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
- mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
- mdk-stage1/insmod-modutils/include/elf_ppc.h,
- mdk-stage1/insmod-modutils/obj/obj_reloc.c,
- mdk-stage1/insmod-modutils/include/elf_sparc.h,
- mdk-stage1/insmod-modutils/util/sys_nim.c,
- mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
- mdk-stage1/insmod-modutils/include/elf_hppa.h,
- mdk-stage1/insmod-busybox/insmod.c,
- mdk-stage1/insmod-modutils/util/meta_expand.c,
- mdk-stage1/insmod-modutils/util/arch64.c,
- mdk-stage1/insmod-modutils/obj/obj_load.c,
- mdk-stage1/insmod-modutils/obj/obj_hppa.c,
- mdk-stage1/insmod-busybox/insmod.h,
- mdk-stage1/insmod-modutils/include/elf_ia64.h,
- mdk-stage1/insmod-modutils/obj/obj_ia64.c,
- mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
- mdk-stage1/insmod-modutils/include/elf_mips.h,
- mdk-stage1/insmod-modutils/include/module.h,
- mdk-stage1/insmod-modutils/obj/obj_mips.c,
- mdk-stage1/insmod-modutils/util/sys_cm.c,
- mdk-stage1/insmod-modutils/obj/obj_alpha.c,
- mdk-stage1/insmod-modutils/include/kerneld.h,
- mdk-stage1/insmod-modutils/util/xrealloc.c,
- mdk-stage1/insmod-modutils/obj/Makefile,
- mdk-stage1/insmod-modutils/insmod-frontend.c,
- mdk-stage1/insmod-modutils/obj/obj_common.c,
- mdk-stage1/insmod-modutils/include/modstat.h,
- mdk-stage1/insmod-modutils/util/Makefile,
- mdk-stage1/insmod-modutils/include/config.h,
- mdk-stage1/insmod-modutils/util/logger.c,
- mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
- mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
- mdk-stage1/insmod-modutils/util/config.c,
- mdk-stage1/insmod-modutils/include/version.h,
- mdk-stage1/insmod-modutils/include/kallsyms.h,
- mdk-stage1/insmod-modutils/include/elf_alpha.h,
- mdk-stage1/insmod-modutils/util/sys_oim.c,
- mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
- not
- over existing /etc/fstab. Fix some stupid stuff
-
- * modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
- * install2.pm (main): don't set a special $remote_path PATH for
- postInstallNonRooted
- (otherwise install's modprobe is not used, and you can't "modprobe
- vfat",
- even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
- found.
-
- * my_gtk.pm (create_box_with_title): disallow focusing on text if it is
- non-scrolled
-
-2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
- mdk-stage1/init-libc-headers.h,
- mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
- mdk-stage1/init.c, mdk-stage1/minilibc.h,
- mdk-stage1/dietlibc/include/unistd.h,
- mdk-stage1/dietlibc/include/sys/socket.h,
- mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
- dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: $graphical is now a module variable. Can
- be changed from everywhere
-
- * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
- not
- over existing /etc/fstab. Fix some stupid stuff
-
- * modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
- * install2.pm (main): don't set a special $remote_path PATH for
- postInstallNonRooted
- (otherwise install's modprobe is not used, and you can't "modprobe
- vfat",
- even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
- found.
-
- * my_gtk.pm (create_box_with_title): disallow focusing on text if it is
- non-scrolled
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
- type to 'list' in
- case of format. should be only set if type is unset
- (ask_from_entries_refH_powered_normalize): if list+format then type is
- 'list', combo not accepted (hacky?)
-
- * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
- call create_okcancel
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
- then type is
- 'list', combo not accepted (hacky?)
-
- * install_steps_auto_install.pm: $graphical is now a module variable. Can
- be changed from everywhere
-
- * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
- call create_okcancel
-
-2001/02/21 dam's <damien@mandrakesoft.com>
-
- * network.pm, netconnect.pm: netconnect recode, wizard compatible.
- network.pm modified for wizard. Still need work for ask_yesorno,
- ask_okcancel. +debugging of course
-
- * standalone/draknet: updated (don't remember what)
-
-2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/Makefile,
- mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
- mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
- mdk-stage1/init-libc-headers.h:
- - fix "init" on ppc (do not use minilibc on non-i386 arch's)
- - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
- - cleanup of "init"
-
- * mdk-stage1/init.c:
- - fix "init" on ppc (do not use minilibc on non-i386 arch's)
- - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
- - cleanup of "init"
- fix up syslog logging stuff
-
-2001/02/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (generateAutoInstFloppy): removed
-
- * install_any.pm (g_auto_install): use selected_leaves for
- default_packages to reduce the
- list of packages (aka cleanup auto_inst.cfg)
- (g_default_packages): created
-
- * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
- and g_default_packages calls in
- advanced
-
- * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
- * pkgs.pm (selected_leaves): created
-
- * install2.pm (main): do postInstallNonRooted before postInstall (so that
- 'modprobe
- vfat' can be done in postInstallNonRooted and used in postInstall)
- - move the loadO of patch/defcfg after loading modules.dep
- - generateAutoInstFloppy is no more a step
- - removed use Data::Dumper
-
-2001/02/21 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21 dam's <damien@mandrakesoft.com>
-
- * docs/wizard.doc: putain de doc de merde pout petite qui est trop débile
-
- * interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
- * mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
- installs
-
-2001/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/02/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (generateAutoInstFloppy): removed
-
- * install_any.pm (g_auto_install): use selected_leaves for
- default_packages to reduce the
- list of packages (aka cleanup auto_inst.cfg)
- (g_default_packages): created
-
- * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
- and g_default_packages calls in
- advanced
-
- * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
- * pkgs.pm (selected_leaves): created
-
- * install2.pm (main): do postInstallNonRooted before postInstall (so that
- 'modprobe
- vfat' can be done in postInstallNonRooted and used in postInstall)
- - move the loadO of patch/defcfg after loading modules.dep
- - generateAutoInstFloppy is no more a step
- - removed use Data::Dumper
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * printerdrake.pm: fix typo
-
- * install_steps.pm, install_steps_gtk.pm, install_any.pm: better
- advertising support
-
-2001/02/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
- installs, make use of Content-Length when available, to display
- progressbar
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: various
- - pcmcia_config.patch now in tools (no more in install which is
- removed)
- - copy xpm's (until step icons work with png's)
- - transform group icons in pngs
-
- * modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
- * tools/pcmcia_config.patch: pcmcia_config.patch now here
-
- * printerdrake.pm: fix typo
-
- * install_any.pm, install_steps.pm, install_steps_gtk.pm: better
- advertising support
-
-2001/02/20 warly
-
- * share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20 François Pons <fpons@mandrakesoft.com>
-
- * c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
- env variable to choose rpmrc file for rpmlib used
- by DrakX, neccessary for live update from a 7.2 or older.
- Check that if something goes wrong with rebuilddb, avoid removing
- old rpm-3 db files.
- Make sure live_install can start from top directory too.
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: various
- - pcmcia_config.patch now in tools (no more in install which is
- removed)
- - copy xpm's (until step icons work with png's)
- - transform group icons in pngs
-
- * modules.pm, class_discard.pm: various
-
- * tools/pcmcia_config.patch: pcmcia_config.patch now here
-
- * my_gtk.pm, Xconfigurator.pm: various
- major move. now ask_from_list returns false when canceled (it doesn't
- die 'ask_from_list canceled' anymore)
-
- * interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
- netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
- any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
- returns false when canceled (it doesn't die 'ask_from_list canceled'
- anymore)
-
-2001/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: try to print errno's stuff when symlink to
- /tmp/stage2 failed
-
- * mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Estonian file
-
-2001/02/19 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
- cancel
-
- * my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
- sillyme)
-
-2001/02/18 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: typo
- make fbastok happy about button placement.
- little improvements.
-
-2001/02/16 dam's <damien@mandrakesoft.com>
-
- * install_gtk.pm: corrected xpm mask
-
- * network.pm: wireless eth support corrected.
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
- share/step-orange-on.xpm, share/step-green-on.xpm,
- share/step-red-click.xpm: re added these xpm files against display mask
- pb.
-
-2001/02/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: better ansi colors
-
- * mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
- * mdk-stage1/stdio-frontend.c: display more nicely when there is a long
- list to choose from (1, 2 or 4 columns)
-
-2001/02/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix i_images
-
- * fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix i_images
- (installPackages): traktolpilization and advertising
-
- * Makefile (get_needed_files): copy png files instead of xpm's
-
- * fsedit.pm (suggestions_mntpoint): fix
-
- * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
- * share/list: add GdkImlib stuff
-
- * perl2fcalls: add Gtk::Gdk::ImlibImage
-
- * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
- if it exists
-
-2001/02/15 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
- install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
- test the faces2xpm stuff.
-
- * share/step-orange-click.xpm, share/rpm-selected.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
- share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
- share/step-red-click.xpm, share/step-green-on.xpm,
- share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
- share/reload.xpm, share/rpm-semiselected.xpm,
- share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
- share/step-red-on.xpm: removed, png are used instead.
-
- * standalone/draknet: updated internet and added eth conf
-
- * share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
- added png images
-
- * share/step-red.png, share/step-orange.png, share/reload.png,
- share/logo-mandrake.png, share/rpm-semiselected.png,
- share/logo-mandrake-Desktop.png, share/rpm-installed.png,
- share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
- share/rpm-selected.png, share/step-orange-click.png,
- share/step-green-click.png, share/step-green.png, share/rpm-base.png,
- share/logo-mandrake2.png, share/ftin.png, share/help.png,
- share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
- share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
- share/rpm-unselected.png: added png images
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * Makefile (get_needed_files): copy png files instead of xpm's
-
- * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
- if it exists
- (selectKeyboard): give clicked as parameter
-
- * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
- * fsedit.pm (suggestions_mntpoint): fix typo
-
- * share/list: add GdkImlib stuff
-
- * perl2fcalls: add Gtk::Gdk::ImlibImage
-
- * install_steps_interactive.pm (summary): better message for i18n
-
- * install_steps_gtk.pm (installPackages): traktolpilization and
- advertising
-
-2001/02/14 dam's <damien@mandrakesoft.com>
-
- * network.pm, standalone/draknet: wireless updated
-
- * share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
- theme :)
-
-2001/02/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: valentin theme :)
- added drawing theme section
-
- * network.pm: wireless updated
- updated wireless eth support
-
- * standalone/draknet: wireless updated
-
- * share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: network con initiated in draknet.
- netconnect improvement.
- typo
-
- * network.pm: typo
- corrected domainname setting
-
- * standalone/draknet: network con initiated in draknet.
- netconnect improvement.
-
-2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/frontend.h, mdk-stage1/network.h,
- mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
- mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
- mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
- * mdk-stage1/modules.c: ask for modules parameters everytime in expert
- mode, to avoid wrong autodetections in certain cases
- - better log of nfs mount errors
- - don't insmod modules already present (important for bzip2 slowness)
-
- * mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
- * mdk-stage1/mount.c, mdk-stage1/nfsmount.c:
- - better log of nfs mount errors
- - don't insmod modules already present (important for bzip2 slowness)
-
- * mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
- better console messages at startup
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: profile handling updated
-
- * network.pm: typo
- corrected domainname setting
-
- * netconnect.pm: finished load_conf
-
-2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
- * mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
- startup
-
- * mdk-stage1/tools.c:
- - save /etc/resolv.conf for rescue
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): can be automatic only in
- non-expert
-
- * any.pm: md5 now done via crypt
-
- * install_steps.pm (exitInstall): catch exception of output report.bug
- (for gc)
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): can be automatic only in
- non-expert
-
- * tools/cvslog2changelog.pl: fix for gc & fpons
- fix for fredl broken CVS
-
- * any.pm: md5 now done via crypt
-
- * install_steps.pm (exitInstall): catch exception of output report.bug
- (for gc)
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * network.pm: experimental wireless eth support. Not tested
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * tools/cvslog2changelog.pl: fix for gc & fpons
- fix for fredl broken CVS
-
- * c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
- be done via crypt of glibc, so remove all this
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * any.pm: merging difference
-
- * netconnect.pm: corrected profile handling
-
- * network.pm: experimental wireless eth support. Not tested
-
-2001/02/12 Pixel <pixel@mandrakesoft.com>
-
- * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
- docs, rescue, tools)
-
-2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c: do not close un unbound socket!!
-
- * c/stuff.xs.pm: close socket everytime in hasNetDevice
-
- * mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
- potential confusions
-
- * modules.pm: re include some network modules
-
-2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list: fix vi trouble
- - add lspci, lspcidrake, vim-minimal
- - better /etc/issue
- - better PS1
- - write embryonic tool (installation of detected drivers according to
- pci cards)
-
- * rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
- * rescue/list.i386, rescue/make_rescue_img, rescue/drvinst:
- - add lspci, lspcidrake, vim-minimal
- - better /etc/issue
- - better PS1
- - write embryonic tool (installation of detected drivers according to
- pci cards)
-
-2001/02/12 Pixel <pixel@mandrakesoft.com>
-
- * rescue/drvinst: pixelization
-
- * docs/README: fix doc about Mandrake/base/compss
-
- * install_steps_gtk.pm (choosePackagesTree): non first choice packages are
- in "Other".
-
- * install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
- partitions choice modified. diskdrake in expert asks what kind
- of auto_allocation is wanted, others choose 'simple' in
- %fsedit::suggestions
-
- * install2.pm: auto_allocate partitions choice modified. diskdrake in
- expert asks what kind
- of auto_allocation is wanted, others choose 'simple' in
- %fsedit::suggestions
- (main): gc has done it again! /tmp/conf.modules is now
- /etc/modules.conf,
- so load both to keep compatibility.
-
- * my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
- * interactive_gtk.pm (ask_from_entries_refW): use
- $common->{advanced_label}
- (create_ctree): add keyboard shortcuts
- (create_clist): moveto only if row_is_visible
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
- defaults to
- _("Advanced")
-
- * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
- docs, rescue, tools)
-
- * install_steps_interactive.pm (configurePrinter): cleanup,
- pkg_install_if_requires_satisfied('xpp',
- 'kups') only if a printer is configured (for the case when _("Would you
- like to configure a printer?") is answered no)
-
- * rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10 Pixel <pixel@mandrakesoft.com>
-
- * standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
- * install_any.pm: add preConfigureTimezone
- add step summary. remove steps configureTimezone and configurePrinter
-
- * install_interactive.pm: cleanup
-
- * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm:
- - lang2keyboards handle keyboard percentages
- - xmodmaps now named keyboards
-
- * install_steps_interactive.pm: add step summary. remove steps
- configureTimezone and configurePrinter, modify selectKeyboard
-
- * install2.pm, timezone.pm, install_steps.pm: add step summary. remove
- steps configureTimezone and configurePrinter
-
- * netconnect.pm: corrected back $install call
-
-2001/02/10 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm:
- - lang2keyboards handle keyboard percentages
- - xmodmaps now named keyboards
-
- * install_steps_interactive.pm: add step summary. remove steps
- configureTimezone and configurePrinter, modify selectKeyboard
-
- * standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
- * install_any.pm: add preConfigureTimezone
- add step summary. remove steps configureTimezone and configurePrinter
-
- * install2.pm, timezone.pm, install_steps.pm: add step summary. remove
- steps configureTimezone and configurePrinter
-
- * install_interactive.pm: cleanup
-
- * netconnect.pm: corrected back $install call
-
-2001/02/09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm,
- timezone.pm: configureTimezone doesn't take parameter
- /etc/sysconfig/clock
-
-2001/02/09 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
- handling, quite weird behaviour though cuz of newt sillyness
-
- * install2.pm: configureTimezone doesn't take parameter
- /etc/sysconfig/clock
- (main): have compatibility with old stage1 (rhimage -> image)
- (formatPartitions):
- s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
- as it should now be (see lang.pm 1.143)
-
- * install_steps.pm, install_steps_interactive.pm, timezone.pm:
- configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09 siegel
-
- * share/po/de.po: new german version
-
-2001/02/08 dam's <damien@mandrakesoft.com>
-
- * standalone/drakgw: implemented or updated embedded mode
- added embedded and (ugly) wizard mode.
-
- * standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
- standalone/keyboarddrake: implemented or updated embedded mode
-
- * standalone/draknet: implemented or updated embedded mode
- added embedded mode
-
- * standalone/XFdrake: implemented or updated embedded mode
- corrected compilation bug.
-
- * standalone/drakboot: implemented or updated embedded mode
- updated embedded mode. Should work, not tested in real world
-
- * netconnect.pm: removed testing wizard instruction
-
-2001/02/08 François Pons <fpons@mandrakesoft.com>
-
- * ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
- * standalone/XFdrake: fix the previous changelog wich was wrong (bad
- spelling),
- added a char in comment to allow a new release (thanks to pixel :-)
- make sure SHARE_PATH is set.
- fixed SHARE_PATH to make sure it is setted.
-
- * Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
- XF3 for SiS card.
-
- * pkgs.pm: fixed problem for updating hdlist after going back to partition
- step.
-
-2001/02/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
- better memory detection (from wonderful drakx)
-
-2001/02/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Norwegian file
-
-2001/02/08 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (availableRamMB): cleanup
-
- * standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
- standalone
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed unknown package ARRAY... and locales selection
- according to langs.
-
- * modules.pm: fixed module name without text for SCSI configuration
- dialog, add log.
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
- mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
- mdk-stage1/network.c:
- - use description of network cards when you have to select between
- interfaces; has accuracy even in the case of multiple interface for a
- given kernel module
- - write down a small "shell" to change parameters on the fly (needs
- compile option SPAWN_INTERACTIVE)
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): better fix for getting
- max install size.
- (choosePackages): call setSelectedFromCompssList with empty
- compssUsersChoice meaning max
-
- * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed unknown package ARRAY... and locales selection
- according to langs.
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): better fix for getting
- max install size.
- (choosePackages): call setSelectedFromCompssList with empty
- compssUsersChoice meaning max
-
- * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: updated wizard mode, intro and other stuff
-
- * interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
- * share/logo-mandrake.xpm: new logo
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
- caused by forked DrakX
- with latent ftp connection.
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 siegel
-
- * share/po/de.po: new german version
-
-2001/02/06 François Pons <fpons@mandrakesoft.com>
-
- * ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
- opening
- and closing connection too fast for each transaction). There seems
- to be some problem for retrieving twice a package, this cause huge pause
- between each transaction, the best is to avoid them so ?
-
-2001/02/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
- mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
- mdk-stage1/modules.c, mdk-stage1/disk.c:
- - slighty change the message when exiting successfully from install,
- to not mess with abnormal termination
- - get back dialog for hostname and domain in case of unable to guess
- domain
- - try to resolve DNS if self-ip can't resolve, to guess domain
- - remember entries so that when there is a problem you don't have to
- re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
- - use larger buffer for list_directory since in /dev there can be
- *many* files
-
-2001/02/05 dam's <damien@mandrakesoft.com>
-
- * Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
- * standalone/draknet: added infos recovering.
-
- * netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: removed abusive white char.
- updated to use urpmi new format (change fakemedium to better label)
- fixed frame buffer usage if not enabled (installation of Aurora)
- clean up and remove unused code.
-
- * ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
- * pkgs.pm: updated to use urpmi new format (change fakemedium to better
- label)
-
- * Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
- * install_steps.pm: fixed frame buffer usage if not enabled (installation
- of Aurora)
- clean up and remove unused code.
-
-2001/02/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/list: updated list of gconv modules
-
-2001/02/05 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (head_tail): fix usage
-
- * interactive_gtk.pm (create_ctree): node_moveto done only if
- node_is_visible is not full
-
-2001/02/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
- file-not-found in args
-
-2001/02/04 Pixel <pixel@mandrakesoft.com>
-
- * interactive_newt.pm: fix adaptation to the terminal size, should now
- work in 80x25
-
- * Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
- * install_steps_interactive.pm (choosePackages): don't call
- chooseSizeToInstall even with experts
-
- * install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03 dam's <damien@mandrakesoft.com>
-
- * modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
- update, net conf saving, and no wizard by default.
-
-2001/02/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/02/03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
- auto_installs
-
- * install_steps_gtk.pm (charsetChanged): created, takes care of setting to
- the right charset the windows
-
- * install_steps_interactive.pm (selectLanguage): call charsetChanged
-
- * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
- move ftp to SYSTEM so that it is installed
-
- * Makefile: install cardmgr
-
- * modules.pm (configure_pcmcia): cleanup
-
-2001/02/03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
- auto_installs
-
- * install_steps_gtk.pm (charsetChanged): created, takes care of setting to
- the right charset the windows
-
- * install_steps_interactive.pm (selectLanguage): call charsetChanged
-
- * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
- move ftp to SYSTEM so that it is installed
-
- * Makefile: install cardmgr
-
- * modules.pm (configure_pcmcia): cleanup
-
-2001/02/02 dam's <damien@mandrakesoft.com>
-
- * share/wizard.rc: added rc file for wizard mode
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): better default for DDC probe
- fails and
- auto_install and not provided any info about the monitor
-
- * my_gtk.pm (gtkcreate_xpm): error handling with error message
-
- * share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
- * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
- /etc/sysconfig/i18n
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
- * install_any.pm (setPackages): in auto_installs, default to all groups
- chosen, unless
- compssUsersChoice exist. Won't change anything unless compssListLevel is
- used of course
-
- * Xconfigurator_consts.pm: add low_default_monitor for default of
- auto_installs
-
- * interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
- * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
- diskdrake.pm: using the new formatXiB
-
- * detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
- the fact that kernel
- 2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
- regexp now that ida/c0d0p? is no more at the beginning of the line.
- (get): cleanup, remove hasIDE hasSCSI...
-
- * common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
- standalone/diskdrake: recoded wizard mode
- corrected some stuff.
- trying not to break draknet for cooker snapshot
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): better default for DDC probe
- fails and
- auto_install and not provided any info about the monitor
-
- * install_any.pm (setPackages): in auto_installs, default to all groups
- chosen, unless
- compssUsersChoice exist. Won't change anything unless compssListLevel is
- used of course
-
- * share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
- chose was glibc-2.1 :-(
- this one en_US and seems all right!
-
- * Xconfigurator_consts.pm: add low_default_monitor for default of
- auto_installs
-
- * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
- diskdrake.pm: using the new formatXiB
-
- * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
- /etc/sysconfig/i18n
-
- * common.pm (formatXiB): created, format a number in human readable format
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: new draknet snapshot. Still unuseable
-
- * interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
- install.
-
-2001/01/31 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corected translation and conflict.
-
-2001/01/31 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: added missing die if modprobe failed on live upgrade.
-
- * pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
- file
- if everything has been successfull.
-
- * install_steps.pm: changed to clean selection for non expert as used for
- group selection
- because it is not cleaned, need better solution TODO.
-
-2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
- BEFORE COLON (:);
- and it is "Profile" and not "Profil")
- CV:
- ----------------------------------------------------------------------
-
-2001/01/31 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackagesTree): created, simple
- ask_many_from_list to choose
- individual packages
- (choosePackages): log for debug
- (choosePackages): don't ask to install in beginner. Max is chosen
- (setRootPassword): help not based on installClass being server or not
- (selectInstallClass): remove installClass choice (was
- normal/devel/server)
- (chooseGroups): fix for individual package selection flag
-
- * netconnect.pm (get_net_device): more cleanup syntax
- (get_net_device): cleanup syntax
-
- * install_steps.pm (selectLanguage): warning for debug
- (miscellaneousBefore): don't use installClass to decide to use
- supermount
- or not. Choice is done on $::corporate. Can't say "no supermount in
- server
- installs" anymore
- (selectInstallClass): emptied
- (setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
- * install_any.pm (g_auto_install): installClass removed
- (setPackages): do not preselect compssUsers entries
-
- * install2.pm (main): don't set installClass=normal meta_class desktop
- (deprecated)
- (miscellaneous): TYPE= removed (was installClass)
- (selectInstallClass): don't set $o->{partitions}. diskdrake will have to
- ask in a set of possibilities
- ($o): replace fclass by fbeginner and fexpert
- ($o): default security level to 2 since it can't be based on
- installClass (deprecated)
-
- * install_steps_gtk.pm: restore window size for time being
-
- * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
- * Xconfigurator.pm (main): better error message for auto_install failing
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
- drakx. Still
- need finding the guilty
-
-2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: more kbd corrections
- fixed soem keybopard values
-
-2001/01/31 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackagesTree): created, simple
- ask_many_from_list to choose
- individual packages
- (choosePackages): log for debug
- (choosePackages): don't ask to install in beginner. Max is chosen
- (setRootPassword): help not based on installClass being server or not
- (selectInstallClass): remove installClass choice (was
- normal/devel/server)
- (chooseGroups): fix for individual package selection flag
-
- * install_steps.pm (selectLanguage): warning for debug
- (miscellaneousBefore): don't use installClass to decide to use
- supermount
- or not. Choice is done on $::corporate. Can't say "no supermount in
- server
- installs" anymore
- (selectInstallClass): emptied
- (setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
- * install_any.pm (g_auto_install): installClass removed
- (setPackages): do not preselect compssUsers entries
-
- * install2.pm (main): don't set installClass=normal meta_class desktop
- (deprecated)
- (miscellaneous): TYPE= removed (was installClass)
- (selectInstallClass): don't set $o->{partitions}. diskdrake will have to
- ask in a set of possibilities
- ($o): replace fclass by fbeginner and fexpert
- ($o): default security level to 2 since it can't be based on
- installClass (deprecated)
-
- * install_steps_gtk.pm: restore window size for time being
-
- * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
- * Xconfigurator.pm (main): better error message for auto_install failing
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
- drakx. Still
- need finding the guilty
-
-2001/01/30 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: new draknet. unstable
-
- * netconnect.pm: updated
- debugged network card configuration after pixelisation.
-
-2001/01/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
- trying to set progressbar to more than 100% (rescue is more compressed
- than drakx)
-
- * share/rpmsrate: add ldetect to config stuff I want to have on all
- installs (lspcidrake)
-
-2001/01/30 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
- adapt format functions given to ask_from_listf. $_ is no more set
-
- * mouse.pm (detect): replace commands::modprobe by modules::load as it
- should (or??)
-
- * perl2etags: adapt to new etags (emacs 21) format
-
- * raid.pm (make): replace commands::modprobe by modules::load as it should
- (or??)
-
- * perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
- regexps
-
- * share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
- separator instead of ".".
- The sheer result is:
- "0.6" * 10 gives 0
- "0,6" * 10 gives 6
-
- So i have overwritten misc/LC_NUMERIC with
- /usr/share/locale/en/LC_NUMERIC and
- it works nicely now :)
-
-2001/01/29 dam's <damien@mandrakesoft.com>
-
- * standalone/drakboot: corrected typo
-
-2001/01/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
- "hd.img"
- - following deprecation of "other.img", reintegrate big modules in
- relevant boot disks
-
-2001/01/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
- more than one ida/c0d0p*
-
-2001/01/28 dam's <damien@mandrakesoft.com>
-
- * share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 siegel
-
- * share/po/de.po: new german version
-
-2001/01/26 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: updated embedded mode
-
- * standalone/drakboot: added embedded mode
-
-2001/01/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
- bzlib
-
- * mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
- * mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
- mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
- mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
- mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
- mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
- mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c:
- - use bzlib instead of zlib to reduce overall size
- - take home my own bzlib code to (1) reduce code size with good
- compile options (2) make it compile and link against dietlibc
-
- * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
- mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
- mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/26 siegel
-
- * share/po/de.po: .
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/25 dam's <damien@mandrakesoft.com>
-
- * install2.pm: disable steps 'packages choice', 'configure X', and
- 'configure' 'printer'
-
- * install_steps_interactive.pm: don't oblige user addition
-
- * network.pm: display ethernet module
-
- * netconnect.pm: network informations filled into
- $prefix/var/lib/naat/configuration
-
-2001/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
- /usr/bin/sh for stage2
-
- * mdk-stage1/probing.h: better tightness of probing stuff
-
- * mdk-stage1/probing.c: better tightness of probing stuff
- print warning message when insmod of PCI-detected device fails
-
- * mdk-stage1/stage1.c:
- - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
- - remove fat/vfat modules from some boot floppies now that we don't
- need it anymore
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
- tulip network cards, kernel-2.4 has strange way to classify some of its
- net modules..
-
-2001/01/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Waw, italian translator is very fast :)
- updated Indonesian and Italian fiels
-
- * share/po/id.po: updated Indonesian and Italian fiels
-
- * share/locales.tar.bz2: added iso9 locale definitions
-
- * lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (spawnShell): fix error message
-
-2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2:
- - clean up deprecated symlinks (insmod, rmmod, cardmgr)
- - remove unecessary device files
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
- mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
- mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
- mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
- mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
- * install_steps.pm (afterInstallPackages): cleanup
-
- * interactive.pm: better documentation of ask_from_entries_refH features
- (entry)
-
-2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2:
- - clean up deprecated symlinks (insmod, rmmod, cardmgr)
- - remove unecessary device files
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
- mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
- mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
- mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
- mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
- * install_steps.pm (afterInstallPackages): cleanup
-
- * interactive.pm: better documentation of ask_from_entries_refH features
- (entry)
-
-2001/01/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
- added network conf save in /root/networking.tmp
-
-2001/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: add automatic support in choice of NET device, in
- case of multiple NET devices
- consistent dot-terminated error messages, consistent no-dot log messages
- re-put Netmask input per default (void entry -> automatic guess)
-
- * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
- dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/id.po: updated Indonesian file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated po files
-
- * share/po/wa.po: updated po files
- updated pot file
-
- * install2.pm, lang.pm: fixed the places where console fonts and related
- files are put under
- /etc/sysconfig to the places really used by console-tools
-
- * share/po/DrakX.pot: updated pot file
-
- * share/po/hr.po: updated po files
- updated Croatian file
-
-2001/01/22 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
- read_rpmsrate
- can be called standalone.
-
- * network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
- install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
- any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
- deprecated, replaced by !$::expert
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
- network/ftp installs
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
- * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
- network/ftp installs
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: fix remaining perror's
-
- * mdk-stage1/stage1.c: fix remaining perror's
- - better msg in fatal errors
- - do not include code to spawn a shell for releases
-
-2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
- * interactive.pm (ask_from_treelist_): created, split with the separator,
- call translate on
- words, then re-join.
-
-2001/01/19 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixes for CD not changeable.
-
- * install_steps_interactive.pm: fixed unselect group and inoperant
- individual package selection.
- removed expert mode and install class.
-
-2001/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed obligation of relative large install, now
- minimum is lesser.
-
- * install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
- to see why as it happens
- on install-abort-choices-install or
- install-abort-choices-fs-format(none)-choices-install
-
- * live_install: update live install to match /tmp/image instead of
- /tmp/rhimage.
-
-2001/01/17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
- /tmp/image.
-
- * pkgs.pm: update to use new header file format in hdlist (added arch) but
- depslist has not it...
-
- * install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated bulgarian file
-
-2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.c: use strrchr instead of doing it by hand
-
- * mdk-stage1/insmod-busybox/busybox.h,
- mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-
- - replace remaining perror's with log_perror's
- - little code cleanup
-
- * mdk-stage1/stage1-data/stage1.tar.bz2,
- mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
- mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c:
- - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12 siegel
-
- * share/po/de.po: updates
-
-2001/01/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed addUser for invocation of
- any::ask_users.
- fixed bad invocation of installation of X server.
-
-2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
- - add wait_message for initializing of CDROM's (it can be long when
- it's SCSI)
- - print CDROM drive names (model) in dialogs
-
- * mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c:
- - fix behaviour with bad ISO images (DISK installs)
- - better dialogs for DISK installs
-
-2001/01/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: make lang list in format for tree-selector
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
- loopback situations
- act nicely when no partitions are found on some disk
-
- * mdk-stage1/modules.h: polish generic blank.img situation (no modules
- and/or modules.dep available)
-
- * mdk-stage1/lomount.c: fix failing umount for DISK installs in some
- failing loopback situations
- better log messages
- continue anyway when insmod'ing of modules fail (for blank.img)
-
- * mdk-stage1/probing.c: close some fd's
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
- situation (no modules and/or modules.dep available)
- continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile, mdk-stage1/disk.c:
- - add DISK install from ISO image file
- - add FTP
- - add HTTP
- - use single place for mountpoints and static directories
-
- * mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h:
- - add DISK install from ISO image file
-
- * mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
- mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c:
- - add FTP
- - add HTTP
- - use single place for mountpoints and static directories
-
- * mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * standalone/adduserdrake: adduserdrake may handles autologin
-
- * install_steps.pm (addUser): set autologin
-
- * install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
- * install_steps_interactive.pm (addUser): fix
-
-2001/01/11 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, ChangeLog,
- netconnect.pm: updated
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
- mar or marfiles not available to perform consistency check
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * interactive_gtk.pm (create_ctree): fix default value selecting failing
- (in case of "format")
- (ask_from_entries_refW): apply "format" on label when icon is missing
- for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
- icon is missing for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at
- the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake
- and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): moved to package any
-
- * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
- icon is missing for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at
- the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake
- and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
- size
-
- * mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
- remove warnings from compile
-
-2001/01/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
- callback on clist/list/ctree
-
- * install_steps.pm (addUser): use any::pack_passwd
- (setRootPassword): use any::unpack_passwd and any::pack_passwd
-
- * Xconfigurator.pm (cardConfiguration): adapt for $install which is
- generic
- (autologin): use $install which is now generic
-
- * install_steps_interactive.pm (selectLanguage): many_languages choice
- moved there as advanced
-
- * my_gtk.pm (create_packtable): yet another try to have something nice :)
- !! uses Gtk::Table::attach_raw which is available in
- perl-GTK-0.7004-6mdk !!
- (create_box_with_title): with the size given to set_usize for the scroll
- containing the text widget in case of long text. and don't let the
- scroll
- grow.
- (gtktext_insert): remove adding an ending "\n" (no more needed?)
-
- * any.pm (setAutologin): cleanup
- (pack_passwd, unpack_passwd): created
-
-2001/01/10 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
- parport*, plip)
-
-2001/01/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
- callback on clist/list/ctree
-
- * install_steps.pm (addUser): use any::pack_passwd
- (setRootPassword): use any::unpack_passwd and any::pack_passwd
-
- * my_gtk.pm (create_packtable): yet another try to have something nice :)
- !! uses Gtk::Table::attach_raw which is available in
- perl-GTK-0.7004-6mdk !!
- (create_box_with_title): with the size given to set_usize for the scroll
- containing the text widget in case of long text. and don't let the
- scroll
- grow.
- (gtktext_insert): remove adding an ending "\n" (no more needed?)
-
- * any.pm (setAutologin): cleanup
- (pack_passwd, unpack_passwd): created
-
- * Xconfigurator.pm (cardConfiguration): adapt for $install which is
- generic
- (autologin): use $install which is now generic
-
- * install_steps_interactive.pm (selectLanguage): many_languages choice
- moved there as advanced
-
- * standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
- standalone/livedrake, standalone/drakboot, standalone/draksec,
- standalone/netdrake, standalone/mousedrake, standalone/drakgw,
- standalone/drakxservices, standalone.pm, standalone/draknet,
- standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
- standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (drakx_version): nicer (4gc)
-
- * install2.pm (main): log::l the drakx_version
-
- * my_gtk.pm (create_packtable): no_expand option added
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): field
- "disabled" added,
- "advanced_messages" added
-
- * lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
- (pack_langs): use lang::langs
-
- * install_steps.pm (selectLanguage): $o->{langs} is now a ref so
- initialize as such
-
- * Makefile (get_needed_files): generate /usr/share/VERSION which contains
- the version
- of ChangeLog (which is updated at each upload)
-
- * install_steps_interactive.pm (choosePartitionsToFormat): handle "check
- for bad blocks" as advanced
- (setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
- * install_any.pm (setPackages): use lang::langs instead of using
- $o->{langs} as a array ref (it is not so anymore)
- (spawnShell): print the drakx_version
-
-2001/01/08 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: fixes
- (ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
- (ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
- * interactive_gtk.pm: fixes
- (ask_from_treelistW): removed
- (create_ctree): created, used for ``type => treelist'' entries
-
- * my_gtk.pm: fixes
-
- * ChangeLog: New snapshot uploaded
-
-2001/01/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
- Czech, Norwegian and Serbian files
-
-2001/01/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: update code for new ask_from_entries_refH
- which doesn't handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
- (selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
- ask_from_listf_, it enables the use of advanced
-
- * any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
- doesn't handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
-
- * interactive.pm: update code for new ask_from_entries_refH which doesn't
- handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
- (ask_from_listf_no_check): replaces ask_from_list_no_check
- (ask_from_entries_refH_powered): sorts the list if needed or wanted
-
- * partition_table_raw.pm (test_for_bad_drives): created
- - ugly stuff needed mainly for Western Digital IDE drives
- - try writing what we've just read, yells if it fails
- - testing on last sector of head #0 (unused in 99% cases)
-
- * ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
- non-existent
- file, stressing the ftp server :-/ )
- for the moment, just release cdrom.img, hd.img and hdreiser.img
- others should should come...
-
- * install_steps.pm: for the moment, just release cdrom.img, hd.img and
- hdreiser.img
- others should should come...
-
- * interactive_gtk.pm (ask_from_listW): removed
- (create_list): calls "format" on list elems before prompting them
- (create_clist): created
- (ask_from_entries_refW): calls create_clist in case of list with no help
-
- * install_steps_gtk.pm (installPackages): autoflush stdout before beeping
- (installPackages): don't take into account the time when prompting the
- user
-
- * common.pm (may_apply): added
-
- * install_any.pm (getHds): test_for_bad_drives called on hard drives
- (getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * ChangeLog: New snapshot uploaded
- New snapshot uploaded
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * ChangeLog: New snapshot uploaded
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * standalone/rpmdrake: deprecated (and has been for a long time now)
-
- * network.pm, install_steps_interactive.pm, netconnect.pm,
- install_interactive.pm, standalone/adduserdrake, any.pm,
- Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
- ask_from_entries_refH parameter format has changed so change all
- accesses to it.
-
-2001/01/05 François Pons <fpons@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: forget _exit in child process after a fork of
- DrakX
- removed need of packdrake binary
-
- * Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
- * live_install2: cleanup to keep libperl.so but the right one
-
- * live_install: no more copy of files on live system, now use environment
- variable by DrakX cleanup
-
- * perl2fcalls: added packdrake call (via new but incomplete) and package
-
- * install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
- * netconnect.pm: fixed syntax error
-
- * modules.pm: eval insmoding ide-cd (just in case)
- removed need of packdrake binary
-
-2001/01/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
- and Japanese files
-
-2001/01/05 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm: help cperl-mode
-
- * interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
- interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
- new ask_from's:
- - ask_from_entries_ref is deprecated, use ask_from_entries_refH
- - ask_from_list now calls ask_from_entries_refH_powered
- still not done:
- - ask_from_treelist should use ask_from_entries_refH_powered,
- and lists with no help should use CList (List is bad)
- - keyboard and mouse binding is still rough
- - enhance the look
-
- * keyboard.pm: add the percentage of each keyboard types (as a comment for
- now)
-
-2001/01/04 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
- code cleanup and fixes for lilo not upgrade
-
-2001/01/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * install_any.pm: fixed the functions doing the lists of languages
-
- * lang.pm: fixed the functions doing the lists of languages
- The list of languages now has complete locale names insted of just
- language
- code (that is needed to differentiate zh_CN and zh_TW among others)
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
- * share/po/eu.po: updated Basque file
- updated Brazilian file
-
-2001/01/04 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: some pixelization using the new if_
-
- * install_steps_interactive.pm (setRootPassword): fix pixelization
- keep $o->{langs} unpacked to simplify things
- if_ pixelization
-
- * common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
- (if_): created. Use it to replace things like
- ($::expert ? $val : ()) by if_($::expert, $val)
-
- * keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
- * lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
- unpacked to simplify things
-
- * netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: admin user removed before beeing added
-
- * netconnect.pm: corrected typo
- LAN is configured with default value if firewall
-
-2001/01/03 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: fixed invocation of change_type by clicking on legend
- unless expert
-
- * install2.pm: fixed usage with testing
-
- * install_steps.pm: fixed some other services to start in case something
- gets wrong,
- this fixes some deadlock on upgrade from 7.0.
- fixed usage with testing
-
- * partition_table.pm: fixed overlapping partitions between one extended
- and one regular primary.
- should be accepted (log printed instead of error) as diskdrake allow
- their
- creation in expert.
-
-2001/01/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add checks of dependencies on marfiles
- fix a couple of broken dependencies in modules.pm
-
-2001/01/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the setting of PATH and spawnShell *after*
- setting $prefix
-
-2000/12/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: added a few locales dependences
-
-2000/12/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (addUser): typo fix
-
- * ChangeLog: New snapshot uploaded
-
- * ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (addUser): typo fix
-
- * ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
- jako
-
-2000/12/26 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Lithuanian file
-
-2000/12/22 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm: corrected admin user
- setting for firewall install.
-
-2000/12/22 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: fixed load_multi on live.
- added back all removed module with the new great mdk-stage1 of gégé.
-
-2000/12/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: make them work with kernel-2.4 by disabling non existent
- modules
-
-2000/12/22 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21 Pixel <pixel@mandrakesoft.com>
-
- * ChangeLog: New snapshot uploaded
-
-2000/12/21 dam's <damien@mandrakesoft.com>
-
- * install2.pm: firewall : automatic class set when firewall (beginner=0)
-
- * install_steps_interactive.pm: if firewall, admin password obliged
-
- * install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
- * any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectMouse): unsure the device exists
-
- * unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * ChangeLog: New snapshot uploaded
- New snapshot uploaded
-
-2000/12/19 dam's <damien@mandrakesoft.com>
-
- * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
- standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
- standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
- standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
- standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
- standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
- standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
- standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
- standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
- * unused/christmas-karaoke.patch: Happy Christmas :)
-
- * install_any.pm: spawnShell: set DISPLAY, just in case :)
-
- * install2.pm: set PATH before doing spawnShell
-
- * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
- * ChangeLog: New snapshot uploaded
-
-2000/12/18 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: added embedded support for control-center
- corrected embedded support.
- new control center and related
-
- * netconnect.pm: corrected typo
- corrected typo
-
- * standalone/drakxservices, standalone/control-center, ChangeLog,
- standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
- standalone/drakboot: new control center and related
-
- * install_gtk.pm: added firewall support
-
- * install2.pm: included firewall handling
- changed firewall comportement
-
- * install_steps_interactive.pm: changed firewall comportement
-
- * modules.pm: corrected bad mergeinconf
-
-2000/12/18 Pixel <pixel@mandrakesoft.com>
-
- * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
- cfI/xfI
- remove isdndb.net
-
-2000/12/19 dam's <damien@mandrakesoft.com>
-
- * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
- standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
- standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
- standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
- standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
- standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
- standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
- standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
- standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
- * unused/christmas-karaoke.patch: Happy Christmas :)
-
- * install_any.pm: spawnShell: set DISPLAY, just in case :)
-
- * install2.pm: set PATH before doing spawnShell
-
- * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: added embedded support for control-center
- corrected embedded support.
- new control center and related
-
- * netconnect.pm: corrected typo
- corrected typo
-
- * standalone/drakxservices, standalone/control-center, ChangeLog,
- standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
- standalone/drakboot: new control center and related
-
- * install_gtk.pm: added firewall support
-
- * install2.pm: included firewall handling
- changed firewall comportement
-
- * install_steps_interactive.pm: changed firewall comportement
-
- * modules.pm: corrected bad mergeinconf
-
-2000/12/18 Pixel <pixel@mandrakesoft.com>
-
- * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
- cfI/xfI
- remove isdndb.net
-
-2000/12/16 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
- * Makefile.drakxtools: fix daminetsex
- use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * share/list: use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * any.pm: fix daminetsex
-
- * modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
- mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
- * c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
- detects mice types :)
- use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * Makefile.config: fix daminetsex
- use ldetect-lst
-
- * Makefile: use ldetect-lst for usb => now auto detects mice types :)
- use ldetect-lst
-
- * netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
- Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
- share/Cards2CardsNames: pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
-2000/12/15 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
- * install_steps.pm: clean all unneeded stuff
-
-2000/12/14 dam's <damien@mandrakesoft.com>
-
- * any_new.pm, netconnect_new.pm: preparing for big jump.
-
- * netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
- Everything should work, but you better test :)
-
- * standalone/control-center: big improvement and cosmetic changes
- a lot of improvement. Is able to launch multiples soft passing in
- arguments.
- new file. Its location should change soon.
-
- * any.pm: Big jump. The *_new.pm are replaced by *.pm
- Everything should work, but you better test :)
- corrected typo.
-
-2000/12/14 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: obsoleted by rpmsrate
-
- * share/rpmsrate: obsoletes compssList
-
- * share/compssUsers, install_steps.pm, install_steps_interactive.pm,
- Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
- move from compssList to rpmsrate
-
- * Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: updated Italian file
-
-2000/12/12 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo + if firewall, don't display 'disable network'
-
- * standalone/draknet2: new version... still working on it
-
- * ChangeLog: commit
-
- * share/themes-mdk-Firewall.rc: added firewall theme
-
- * modules.pm: my fault, corrected renaud's patch incorporation
-
- * share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12 François Pons <fpons@mandrakesoft.com>
-
- * share/list: added packdrake.pm as packdrake has been splited.
-
- * pkgs.pm: fixed versionCompare to always return number. added checking of
- version to
- select obsoletes on upgrade.
-
-2000/12/11 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: Radeon uses 3D now.
-
- * lang.pm: fixed write_langs for upgrade.
- i18n sucking fixes.
-
- * Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09 Pixel <pixel@mandrakesoft.com>
-
- * standalone/adduserdrake: remove debugging code
-
- * install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
- * interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
- null in case of error
- on hidden entry cuz newt doesn't display null entries, disturbing
-
- * install_steps_interactive.pm (formatMountPartitions): the format
- partition dialog created at first use,
- so that it doesn't appear if no partitions are formatted.
- (selectInstallClass): ensure expert choice is kept if it was prechosen
- (selectInstallClass): if expert pre-chosen, ensure expert is kept
-
- * interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
- share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): warn if VERSION file doesn't exist
- (formatPartitions): call rotate_logs after mounting the partitions
-
- * mouse.pm (write_conf): fix to make make test_pms happy
-
- * install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
- * any.pm (rotate_logs): created, rotates ddebug.log and install.log in
- /root
-
- * ftp.pm (new): retry in case of ftp connection/login
-
- * commands.pm: report_bug: created, returns a string
-
-2000/12/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected ADSL connection choice.
- corrected typo
-
-2000/12/06 dam's <damien@mandrakesoft.com>
-
- * install2.pm: erare humanum es
- firewall begins to infect the install :).
- new meta_class.
-
- * share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
- * install_gtk.pm: corrected errors
- left pixmap centered if firewall
- improved the firewall theme.
- errare humanum es
- firewall infects the install.
- The logo is changed if firewall.
-
-2000/12/06 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake: add possibility to use keyboarddrake
- non-interactive (aka give the keyboard as
- first parameter)
-
- * lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
- install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
- Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: final fixes to versionCompare to make sure no deadlock can
- occurs.
-
- * Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
- share/po/es.po: updated several pofiles
-
-2000/12/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: use isCdNotEjectable.
-
- * common.pm: added function isCdNotEjectable.
-
- * share/Cards+: SiS620 card are said to be unsupported by XF4.
-
- * pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
- memory).
- fixed compareVersion for deadlock. removed silly CODE print on deporder
- problems.
-
- * Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: incorporated cmodifications in the firewall branch
-
- * netconnect.pm: netconnect_new > netconnect.pm
-
- * netconnect_consts.pm: incorporated in the firewall branch.
-
- * standalone/draknet2: incoporated in the firewall branch
-
- * any_new.pm: any_new > any, so we remove it now.
-
- * netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
- incorporated in the firewall branch
-
- * modules.pm: incorporated modifications to the firewall branch. Hope they
- won't break anything...
-
-2000/12/02 dam's <damien@mandrakesoft.com>
-
- * share/po/az.po: correction in firewall incorporated
-
- * ChangeLog: first attempt ro build the firewall install
-
- * standalone/mousedrake: incorporated in the firewall branch
-
- * share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
- in the firewall branch
-
-2000/11/28 dam's <damien@mandrakesoft.com>
-
- * modules.pm: included reno's patches. Now should work without kudzu.
- branch to build the firewall install.
-
- * standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
- standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
- standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
- standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
- standalone/pixmaps/isdn.xpm: Initial revision
- branch to build the firewall install.
-
- * partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
- share/template.in/cdrom.kdelnk.in,
- share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
- Makefile, share/consolefonts/lat0-sun16,
- share/themes/DarkMarble-check_off.png,
- share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
- do_resize_fat, share/po/wa.po, share/po/is.po,
- share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
- class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
- install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
- share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
- share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
- share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
- standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
- share/step-green-click.xpm, partition_table_sun.pm,
- share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
- share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
- resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
- Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
- share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
- share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
- c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
- standalone/livedrake, share/diskdrake.rc,
- share/themes/DarkMarble-check_on.png, standalone/draknet,
- share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
- share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
- share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
- share/step-green.xpm, share/rpm-base.xpm,
- share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
- share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
- share/Cards2CardsNames, Newt/Makefile.PL,
- share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
- share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
- standalone/icons/findf.xpm, share/po/lt.po,
- share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
- share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
- detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
- standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
- Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
- share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
- share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
- resize_fat/.cvsignore, install_steps_interactive.pm,
- share/themes/mdk-button4.png, live_install, standalone/draknet2,
- any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
- share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
- share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
- swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
- g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
- partition_table_mac.pm, standalone/mousedrake, devices.pm,
- share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
- share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
- share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
- Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
- share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
- share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
- perl2etags, share/po/Changelog, standalone/drakboot,
- resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
- share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
- share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
- standalone/printerdrake, services.pm, share/kmap2bkmap,
- share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
- common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
- install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
- share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
- c/Makefile.PL, share/themes-mdk-Desktop.rc,
- share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
- share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
- share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
- share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
- install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
- my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
- share/po/fr.po, share/themes/DarkMarble-button3_in.png,
- standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
- standalone/diskdrake, share/po/ko.po,
- share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
- share/po/ja.po, any.pm, share/isdndb.net,
- share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
- share/step-red-click.xpm, share/po/Makefile, help.pm,
- share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
- share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
- loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
- Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
- standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
- interactive_stdio.pm, live_install2, resize_fat/directory.pm,
- share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
- share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
- share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
- share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
- standalone/adduserdrake, share/themes/marble3d-button2.png,
- partition_table_raw.pm, share/template.in/zip.kdelnk.in,
- share/locales.tar.bz2, standalone/icons/fileopen.xpm,
- share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
- commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
- interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
- interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
- bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: change upgrade section for keyboard.
-
- * install_steps_gtk.pm: extended chooseSizeToInstall.
-
- * install_steps.pm: updated comment.
-
- * pkgs.pm: fixed misuse of map with values returing list which are indexed
- afterward.
-
- * install_any.pm: removed some more logs.
-
- * keyboard.pm: keep track of unknown keyboard (for upgrade)
-
- * install_steps_interactive.pm: modified def_mark to 59 (gl hw
- acceleration level) and upgrade use this level
- for newbies so.
- make sure a recommended upgrade get the minimum and a little more (80).
- choose default size according to a default mark (currently 49).
-
-2000/11/27 dam's <damien@mandrakesoft.com>
-
- * netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (@bad_types): list of the different type of extended
- partitions
- (important_types): remove @bad_types from important_types
-
-2000/11/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ru.po: updated Russian file
-
-2000/11/24 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: doc + split
-
- * netconnect_new.pm: added depmod after having writed modules.conf
-
- * standalone/mousedrake: splited
-
-2000/11/24 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid .la files for selection.
-
- * install_steps.pm: added missing portmap.
-
-2000/11/23 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: progressbar.
-
-2000/11/23 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm: updated with
- structural change of pkgs.
-
- * install_any.pm: removed some ugly logs.
- updated with structural change of pkgs.
-
- * install_steps.pm: added tempory fix for initscripts %post.
- updated with structural change of pkgs.
-
- * pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
- removed ugly log on transaction.
- added special case to avoid counting kernels space when upgrading
- as these package are not upgraded (just installed).
- Memory usage optimization, change structure of storing
- package informations. lot of fork to make sure of
- freeing memory by perl (no free on used hashes or arrays
- usable by other than perl), now upgrade takes as much as
- install which takes at least 0.5Mb less than before.
-
-2000/11/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: put all tina stuff to weight 0
-
-2000/11/21 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
- keep
- wacom entries.
-
- * Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
- depth wanted.
-
- * install_steps.pm: always try to get default from /etc/X11/XF86Config
- removing logs.
-
- * pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
- * install_steps_interactive.pm: removed code to ask if take care of
- /etc/X11/XF86Config* files.
- added wait message during rebuild of rpm database as it takes some time.
-
- * Xconfigurator_new.pm: WARNING
-
-2000/11/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2000/11/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: clean up as today filelist is no more.
- use parsehdlist from rpmtools-2.1-3mdk or above instead of
- perl code from DrakX forking to simulate a filelist server.
- this increase performance by 100 to 150% on selection of
- packages to upgrade.
-
- * share/list: added parsehdlist.
-
- * c/stuff.xs.pm: removed logs.
-
-2000/11/20 Pixel <pixel@mandrakesoft.com>
-
- * share/Cards+: add radeon
-
- * install_steps_auto_install.pm (exitInstall): fix message
-
- * install_steps.pm (afterInstallPackages): moved the
- writeandclean_ldsoconf here
-
- * fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16 François Pons <fpons@mandrakesoft.com>
-
- * share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
- * modules.pm: tempory version for current glibc, a lot of module have been
- removed due to
- problem of stage1 increase in size when compiled with glibc-2.2 and
- current
- modutils.
-
- * c/Makefile.PL: updated with rpmlib 4.
-
- * c/stuff.xs.pm: completed something that seems to work almost correctly
- at the first look
- with rpmlib 4.
-
-2000/11/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: add netscape-german, thx to florin
- isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
- * share/po/sk.po: updated Slovak file
-
-2000/11/15 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: added isdn_get_list and isdn_get_info
- calls modules::write_conf to fill the modules.conf.
-
- * Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
- at all for now.
-
- * modules.pm: when loading a new module, add an alias for it, even in
- standalone mode.
-
-2000/11/15 François Pons <fpons@mandrakesoft.com>
-
- * c/stuff.xs.pm: updated for rpm 4.
-
- * pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile.PL: add librpmio
-
- * c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
- (dev_t)
-
-2000/11/14 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: better structure for the ethx-driver.
- added call to add_alias and write_conf
-
- * standalone/draknet2: updated
-
-2000/11/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: removed foreach (<... which are eating memory
- fork install on upgrade for searching trhough filelist, this saves
- about 20Mb of memory before rpmlib transaction are started so its is
- more than 2 times faster for upgrading a system, sorry it was
- effectively
- a machine two overloaded that makes the upgrade slower.
- make rpmlib not to check size as DrakX should do it.
- added special cases for selection of packages according to files, avoid
- all kde-i18n packages if their locales-$lang is not selected, avoid
- a -devel package if only one files is updated (typical for fixes on
- package by moving files around).
-
- deactivated rpmdepOrder as it should be done directly in
- depslist.ordered
- file.
-
- fixed obsoletes which never run correctly, even if almost no package are
- selected explicitely this way.
-
- added log during selection of packages to upgrade to keep a track of
- what DrakX is doing.
-
- * modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
- Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
- printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
- memory
-
-2000/11/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2000/11/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake: fix for bug #1350
- (mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
- * pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
- .cz22 for
- .cz2) that makes for than one CD install breaks :-(
-
-2000/11/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2000/11/10 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: draknet2 : new version of draknet, post-install
- only, uses only libDrakX backend, beautyfull
-
- * netconnect_new.pm: completed adsl_conf_backend
- corrected conf_network_card_backend : return interface and module
- separately
- splitted pppconfig.
-
-2000/11/10 François Pons <fpons@mandrakesoft.com>
-
- * share/po/fr.po: typo fixing
-
- * printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
- updated typo for remote CUPS server configuration dialog
-
-2000/11/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
- * share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
- section)
-
-2000/11/09 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09 François Pons <fpons@mandrakesoft.com>
-
- * share/po/fr.po: add some missing translation (mainly printer for CUPS
- remote config)
-
- * printer.pm: make sure to restart cups when cupsd.conf is modified.
-
- * printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: updated
-
-2000/11/08 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: make sure class discarding do not destroy result
-
- * pkgs.pm: added new function for selected or installed accessor on pkg
- make sure package already installed for oem are marked as selected, as
- some
- code refer to this state to perform some actions (install_urpmi)
-
- * install_steps.pm: fixed for urpmi again;
-
- * printerdrake.pm: add management of BrowsePoll <ip>:<port> in
- /etc/cups/cupsd.conf
-
- * printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
-
-2000/11/07 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: now there are 8 ttyS* available for configuration. Used for
- internal modem configuration that uses ttyS* > 3
-
- * netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
- some doc
-
-2000/11/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
- * install_steps_interactive.pm: use of install_any::boot_medium to avoid
- listing medium used for boot
-
- * install_any.pm: use of $boot_medium where the boot medium is used
- (default 1)
-
-2000/11/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
- <sileryti@mail.com>
-
-2000/11/07 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): in oem, configureX automatic
- (main): $::oem is now global :-( (needed in install_steps.pm)
-
- * install_steps.pm (afterInstallPackages): give medium 'cdrom' to
- install_urpmi in case of $::oem
-
-2000/11/06 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: backend/frontend fork complete
-
- * any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
- function is passed by argument
-
- * network.pm: configureNetwork2 commented.
-
-2000/11/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: created function for examining already installed package on
- install (oem).
-
- * install2.pm: add a flag to allow by default formating /
-
- * install_steps.pm: conditionnal format of / and use already installed
- packages if any on install.
-
-2000/11/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
- <ajulius@yahoo.com>
-
-2000/11/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
- GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
- ascii transliteration for them
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (formatPartitions): formatMountPartitions done even in
- upgrade
- (main): set $o->{partitioning}{use_existing_root} in oem
-
- * install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
- plain dumb
- (doPartitionDisksAfter): fs::mount_all moved here
- (doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
- * install_any.pm (use_root_part): fs::mount_all really removed
- (use_root_part): fs::mount_all removed
-
- * install_steps_interactive.pm (choosePartitionsToFormat): don't propose
- already mounted partitions
- (installCrypto): nicer layout
-
-2000/11/05 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
- <yves@maniette.com>
-
-2000/11/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eo.po: updated Esperanto file
-
-2000/10/31 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: continuing forking frontend - backend. adsl ist
- nearly finished
-
- * any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
- tu damsera
-
-2000/10/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
-
- * share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
-2000/10/27 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: remove the noising rpm output command line when loging
- installed rpm
- size (only usefull for live_update and just for conveniance).
-
- * pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
- hack)
- before reading a compssUsers file.
-
- * live_install: add VERSION in list of file that have to be symlinked.
-
- * common.pm: list_skels returns list of existing directory and writeable.
-
- * live_install2: Make sure to remove font path in /tmp/drakx before
- exiting.
-
-2000/10/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
- Turkish files
-
-2000/10/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po: updated Polish file
-
-2000/10/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po: updated Catalan file
-
-2000/10/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
- to please jl :)
-
- * detect_devices.pm (floppies, probeall): add require "modules" as it
- should be
-
- * install_interactive.pm (partitionWizardSolutions): add "require
- resize_fat::main" as it should be
-
-2000/10/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
- 74/0/74
-
-2000/10/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
- and Ukrainian files
-
-2000/10/20 fabman
-
- * share/po/es.po: updated
-
-2000/10/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: ntp to -1/-1/-1
-
-2000/10/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: put all packages requiring kde1-compat to 0 except
- kisdn-free
- aumix now gets a high weight (79) because it's required to save the
- mixer
- settings at shutdown
-
-2000/10/19 Pixel <pixel@mandrakesoft.com>
-
- * share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19 tlb
-
- * share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: Added AZeri file
-
- * share/po/no.po: updated Norwegian file
-
-2000/10/17 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
- code in ineractive_gtk
- added some isdn card in pcitable
- corrected typos, and made ISA isdn work
-
-2000/10/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/lv.po: updated Latvian file
-
-2000/10/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
- * standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
- setting
-
-2000/10/16 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
- * share/compssList: sympa is -1 except for server
-
- * keyboard.pm (write): small pixelization (neater now)
-
- * install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2000/10/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: small fix for Swedish locale
-
- * share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
- share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13 François Pons <fpons@mandrakesoft.com>
-
- * partition_table_empty.pm: empty partition table as assumed only if the
- MBR is really composed of only null chars.
-
-2000/10/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: added viavoicemenu
-
-2000/10/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11 Pixel <pixel@mandrakesoft.com>
-
- * .cvsignore: ignore flog files
-
- * install2.pm (main): test
-
- * ChangeLog: qsdqsd
-
- * install_steps_interactive.pm: * (selectKeyboard): set default
- $o->{langs} to $o->{lang}
-
-2000/10/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, ChangeLog: make only one call to urpmi in order to
- install all the needed rpm's
-
-2000/10/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po, share/po/es.po: updated Norwegian file
-
- * share/po/pl.po: updated Polish file
-
- * share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10 tlb
-
- * share/po/da.po: 99%.
-
-2000-10-10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: make only one call to urpmi in order
- to install all the needed rpm's
-
-2000-10-10 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-10 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: increase $::VERSION
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (kdeicons_postinstall): remove the handling of
- doc desktop icons. see dadou
-
-2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: new list (with icons)
-
- * share/list: add icons for compssUsers
-
-2000-10-09 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: added wait message
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added tuxracer in OpenGL games to install if an
- accelerated card has been found.
-
-2000-10-09 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): asking connection after writing start/stop scripts.
- (adsl_conf): if during install, don't use chkconfig, make the
- links directly for the adsl init script.
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): UserView in kdmrc is
- now true by default. So put false if security >= 3 instead of
- removing it.
-
-2000-10-09 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: default speed of modem set to 115200.
-
- * fs.pm: fixed format of RAID partition.
-
- * install_interactive.pm: take into account RAID partitions for
- searching / partition.
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
- (selectLanguage): don't set $o->{langs} (so that you can go back
- and it works)
-
- * common.pm (round_up, round_down): ensure number is an integer
-
- * install_steps_interactive.pm (chooseGroups): take into account
- the min_level to compute the size
-
-2000-10-08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): move the
- computing of max_size before calling chooseGroups (not the one for
- desktop meta_class)
- (chooseGroups): compute the size of Miscellaneous
-
-2000-10-07 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-07 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: don't install locales-* even in 'all' install
- (those files are usefull if RPM_INSTALL_LANG doesn't include that
- lang)
-
-2000-10-07 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-07 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (install): log the gonna be installed packages (-> be
- able to track not installed packages that should have been
- installed)
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
- (intro): connection detection improved : now use "ifconfig | grep interface"
- (pppConfig): corrected cnx_up/down
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): don't fail if
- kdeglobals file is not there
-
- * share/compssUsers.desktop: fix icons
-
- * detect_devices.pm (cdroms): fix for scsi cdrom drives
-
- * pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
- (dixit jeff)
-
- * diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
- moment
-
-2000-10-06 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm: updated
- license.
-
- * Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
- DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
- drakres and no wm available, moved Riva128 card from experimental
- to stable, fixed presentations of text.
-
- * pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: fixed bad call to hasUsb...
-
- * share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
- 530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 Pixel <pixel@mandrakesoft.com>
-
- * share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore
-
- * install_steps.pm (afterInstallPackages): put the Charset in
- kdeglobals, otherwise kde uses charset iso8859-1 :(
-
- * lang.pm (charset): created
-
- * common.pm (update_userkderc): fix it, change the argument
- passing
-
-2000-10-05 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: raise kde-i18n-*, should be installed whenever
- kdebase is installed
-
- * pci_probing/pcitable: integrate patch from viet (concerns
- sym53c8xx cards)
-
- * share/compssUsers: use "documentation" as the database icon
-
- * install_steps_interactive.pm (chooseGroups): fix to accept icons
- not in the format "*_section.xpm"
-
- * install2.pm (miscellaneous): put yes/no in sysconfig/usb entries
-
-2000-10-05 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (adsl_conf): updated pppoe conf.
- (main): added $netc->{minus_one} to avoid to count dhcp configured
- eth when asking to share the connection.
- (adsl-pppoe): improvement. Should work now.
- (miscellaneous): corrected chmod 755 to 744 for connections scripts
-
- * netconnect.pm (main): network is stopped then started, instead
- of restarted.
-
-2000-10-05 François Pons <fpons@mandrakesoft.com>
-
- * live_install: added icons (this fixes the yellow on white
- tooltips problem).
-
- * install_any.pm: added ghostscript-utils in the list of packages
- to copy when changing CD.
-
- * printerdrake.pm: install ghostscript-utils if a lexmark printer
- is selected on cups.
-
-2000-10-05 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-05 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (loadO): look for auto_inst.cfg in /, not in
- /Mandrake/base
-
-2000-10-05 François Pons <fpons@mandrakesoft.com>
-
- * netconnect.pm: fixed syntax error.
-
- * share/po/i18n_compssUsers: simplified version and fixed
- dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04 François Pons <fpons@mandrakesoft.com>
-
- * install_gtk.pm: removed 80 pixel on height for live upgrade.
-
- * install_steps.pm: do not set keyboard when live upgrade after
- setting the language.
-
- * install_steps_gtk.pm: fixed the trying to start a X server on
- live.
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * share/po/i18n_compssUsers: fake module ``c'' so that no need to
- build DrakX to use i18n_compssUsers
-
- * install_steps_interactive.pm (selectLanguage): update license
-
- * install_steps_gtk.pm (installPackages): add second license for
- shitty soft (commercial one)
-
-2000-10-04 dam's <damien@mandrakesoft.com>
-
- * draknet (netconnect.pm and network.pm): various translations
- corrected, network is restarted, buttons connect/disconnect
- debugged.
-
-2000-10-04 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): kill prefdm instead of autologin
-
- * install_any.pm (find_root_parts): don't use
- suggest_mount_points, it couldn't do what we wanted
- (guess_mount_point): created, contains the common stuff between
- suggest_mount_points and find_root_parts
-
-2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: fix some failing/untranslated i18n messages
-
- * share/po/fr.po: write translations according to drakgw
-
-2000-10-04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
- * install_any.pm: removed Aurora for SiS card, add more case for
- detecting right cdrom for live upgrade, fixed wrong list of
- packages for laptops.
-
- * c/stuff.xs.pm: added time interval of 200ms between update of
- progression bar of install, make sure the last step is seen.
-
-2000-10-04 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (when_load): stricter regexp for $type is scsi or not
- (so that scsi_mod with is scsi_raw doesn't get an alias
- scsi_hostadapter)
-
- * detect_devices.pm (isLS120Drive): extend the regexp to include
- "Caleb Technology - 144MB FDD UHD Floppy"
-
- * detect_devices.pm (burners, IDEburners): reworked, renamed, now
- works!
- * c/stuff.xs.pm (isBurner): created
-
- * modules.pm (load_ide): make sure ide-cd is loaded!
-
- * install_steps_interactive.pm (chooseGroups): the label and help
- are now translated (at least will be), so use the translations
-
-2000-10-03 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile (DrakX.pot): added the to-be-translated from
- compssUsers
- * share/po/i18n_compssUsers: read the compssUsers's and output the
- to-be-translated in po format
-
- * log.pm (l): log to STDERR instead of STDOUT
-
- * install_any.pm (loadO): use first floppy drive available (won't
- help much though, as stage1 doesn't follow this...)
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): don't propose autologin in
- security > 3
-
- * common.pm (availableRamMB): HACK HACK if i810 and memsize,
- returns 127
-
- * bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/validate.pl: create this tool
-
- * share/po/fr.po: fix many typos
-
- * share/po/fr.po: make compssUsers translation
-
-2000-10-03 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: changed resolution allocation.
-
- * fs.pm: removed no more used log.
-
- * install2.pm: add exit button if live upgrade.
-
- * install_any.pm: increased minimal available size to 65Mb.
-
- * install_steps.pm, standalone/printerdrake: fixed cups to CUPS
- for mode.
-
- * printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
- * share/Cards+: fixed Savage2000 entry.
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-03 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: updated bad card with Rage Mobility card.
-
- * live_install: added test of root user, abort if not root.
-
-2000-10-03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-02 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm (Resize): fix to make ext2resizing work a little
- better
-
- * install_steps.pm: fixed installation of urpmi configuration.
-
- * detect_devices.pm: updated comment about UltraDMA66/100
- management.
-
- * modules.pm: updated comment about UltraDMA66/100 management.
-
- * diskdrake.pm: adding a cylinder for the minimum of the resize
- and if there is nothing to do for resize, simply return.
-
- * install_any.pm: added missing require pkgs.
-
-2000-10-02 Pixel <pixel@mandrakesoft.com>
-
- * many files: remove many lnx4win special cases which are not
- needed anymore
-
- * any.pm (addUsers): grpuser output goes to Mr Dave
-
- * bootloader.pm (install_lilo): change the default color of menu
-
- * install_steps_interactive.pm (choosePackages): add 300MB choice
- in desktop
-
- * mouse.pm (fullnames): fix i18n fix
-
- * install_steps.pm (miscellaneous): don't add ide2=0x... for
- ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-
- * Xconfigurator.pm (main): add handling of icewm logout
-
- * c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): infos are written only when needed.
- * netconnect.pm (intro): connection checking now works.
-
-2000-10-02 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
- jeff request.
-
-2000-09-30 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-30 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: a LOT of bugs fixed. draknet is now completely
- brok^H^H^H^Hfrozen.
-
-2000-09-29 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-29 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (adsl_conf): dhcp should better work.
-
- * network.pm (configureNetwork): remove connection script if a
- gateway is given.
-
- * common.pm (setVarsInShMode): created. chmod the file with
- permissions passed in argument.
-
-2000-09-29 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm (load): fixed when standalone, use modprobe.
-
- * pkgs.pm: added preference for wu-ftpd.
-
- * detect_devices.pm: added code to proble USB printer.
-
- * printer.pm: fixed missing PRINTER=yes on CUPS configuration for
- USB printer.
-
- * install_steps.pm: removed possibilty to add an user in urpmi
- group (jloup).
-
- * install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: sync with latest packages
-
- * install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
- MandrakeSoft physical address
-
-2000-09-29 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-29 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (intro): detection of internet
- configuration/connexion state.
-
- * network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_thiskind): add read_already_loaded cuz of
- pcmcia
-
-2000-09-28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): the minimum is 25
- in beginner, not 10
-
- * pkgs.pm (readCompssUsers): fix reading description
-
- * install_steps.pm (afterInstallPackages): remove the code to
- handle RPM-GPG-KEYS
-
-2000-09-28 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_list_with_helpW): no more theme
- parsing, no more draknet.rc
-
- * netconnect.pm (read_net_conf): no adsl tree anymore.
-
- * netconnect.pm: drakgw called if enough card are installed.
-
- * netconnect.pm: minor bugs correction.
-
-2000-09-28 François Pons <fpons@mandrakesoft.com>
-
- * Makefile.config: added livedrake for drakxtools.
- * diskdrake.pm: use corrected partition size when resizing a dos
- partition (like the others).
- * install_any.pm: no more pnm2ppa packages and others in package
- to copy when changing CD.
- * live_install: exec live_install2 instead.
- * live_install2: contains post live upgrade stuff now.
- * printerdrake.pm: protect set_help() usage by if $::isInstall,
- removed reference to package pnm2ppa and others.
- * standalone/livedrake: initial release for drakxtools.
-
-2000-09-28 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partitionWizardSolutions): fix the limit
- cases for lnx4win
-
- * share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): set $size2install
- to $availableC in desktop install, as it should be
-
- * install2.pm (choosePackages): remove the code for removing kdesu
- in high security...
-
- * install_steps_interactive.pm (createBootdisk): format more
- nicely the text
-
- * install_steps_gtk.pm (installPackages): add 10 seconds to have a
- better estimation
-
- * install_steps_interactive.pm (chooseGroups): now returns a boolean
- (choosePackages): use chooseGroups return value to redo
- choosePackages
-
- * install_steps_gtk.pm (selectMouse): if mouse type is none, then
- don't test!
-
- * Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
- * various: replace all Rescue by Update
-
- * pkgs.pm (readCompssUsers): read description for groups
-
- * install_steps_interactive.pm (chooseGroups): add description for
- groups
-
-2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers.desktop: added description
-
- * share/compssUsers: added description
-
- * share/compssUsers.desktop: added icon support, reordered,
- renamed
-
- * share/compssUsers: reordered, renamed
-
-2000-09-27 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectLanguage): intregrate
- license again
-
- * pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
- * diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
- (as should be)
-
- * install_steps_gtk.pm (selectInstallClass1): if @$l (list of
- install classes) contains only one element, call
- install_steps_interactive::selectInstallClass1
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fix for
- "no partitions selected to format"
-
- * my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie
-
-2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: more for gnupg, -11 for sucking things,
- changed compss-groups to be less than 70.
-
- * share/compssUsers: modified compssUsers with Warly, added
- compssUsers.desktop, simplified for KD (now uses Graphical
- Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (get_info_adsl_providers, read_adsl_providers):
- Created. adsl provider tree.
- (set_net_conf): better informations storing.
-
- * my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
- 3D hw acceleration for i815 (VideoRam). prefer XF3 for all
- NeoMagic cards.
- * install_gtk.pm: re-enabled themes on live upgrade but without
- modifying background image.
- * install_steps_gtk.pm: fixed missing help.
- * live_install: lot of fixes to enable DrakX font, keep upgraded
- system clean (libperl.so which allows graphical login).
- * pkgs.pm: added function allowedToUpgrade to filter kernel
- package.
-
-2000-09-27 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): if `clicked' don't go
- to auto mode
-
- * Xconfigurator.pm (monitorConfiguration): fix the translated
- 'Generic' which is not so (and must not be so) anymore
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: remove all Unskip code
-
- * my_gtk.pm (_create_window): add shortcut alt-e to switch to
- expert
-
- * Xconfigurator.pm (resolutionsConfiguration): fix for setting
- legal resolution
-
- * install_steps_interactive.pm (selectLanguage): use formatAlaTeX
- on the license
-
-2000-09-26 François Pons <fpons@mandrakesoft.com>
-
- * fs.pm: added mounting of swap partition when mounting them
- all (this can help :-)
- * pkgs.pm: fixed correction size code to make (really) a true
- bijection between corrected and rpm size.
-
-2000-09-26 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectLanguage): integrate the
- license (temporary one)
-
- * modules.pm (write_conf): fix the /etc/modules generation
-
- * interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
- in icon format, use scrollbar. In non-icon format, use scrollbar
- for more than 11 entries.
-
- * commands.pm (bug): add ddcxinfos
-
- * pci_probing/pcitable: replace tulip by de4x5 for 2104x cards
-
-2000-09-26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added more 3D Rage Pro card for 3D
- acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
- modified identification for checking acceleration.
- * install_any.pm: added automatic installation (up 60) for
- OpenGL games if a graphic card MAY BE accelerated.
- * live_install: fixed perl idioms in pure shell script and added
- packdrake symlink if not already installed.
- * share/compssList: changed level to -1 for all needing 3D hw
- acceleration packages.
-
-2000-09-26 dam's <damien@mandrakesoft.com>
-
- * network.pm (write_resolv_conf): write temp dns line to be used
- with new initscripts package. Use to set dns live.
-
-2000-09-26 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (read): catch exception if fullname2mouse fails (eg:
- old FULLNAME format)
-
-2000-09-25 Pixel <pixel@mandrakesoft.com>
-
- * share/MonitorsDB: merge with latest redhat MonitorsDB
-
- * pci_probing/pcitable: major merge with latest redhat pcitable
-
- * share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
- "Rage 128", added "Rage 128 Mobility"
-
- * install_any.pm (getAvailableSpace): keep 10% of free space on
- big partitions
-
- * Xconfigurator.pm (readMonitorsDB): don't translate Generic
- (otherwise, only a part is translated, see MonitorsDB for the
- non-translated part)
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
- * install_steps.pm (afterInstallPackages, beforeInstallPackages):
- RPM-GPG-KEYS is copied before installing packages
-
- * pkgs.pm (readCompssUsers): handle icons in compssUsers
-
- * common.pm (truncate_list): ensure the list is not too big
-
- * install_steps_gtk.pm (choosePackagesTree): restrict the list to
- 20 elements if it is too big (use truncate_list)
-
-2000-09-25 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: add Video mode for entry.
- * fs.pm: updated for live upgrade.
- * install2.pm: dropped unuseful steps filtering.
- * install_any.pm: fixed wrong Device3Dfx package name and clean
- postinstall rpms directory on upgrade before filling it.
- * install_gtk.pm: removed window restrictions of live upgrade.
- * install_steps.pm: fixed initrd symlink following in case of
- upgrade.
- * install_steps_gtk.pm, install_steps_interactive.pm: keep always
- upgrade on live upgrade.
- * modules.pm: may fixed pcmcia lost driver (typically on network).
- * pkgs.pm: fixed (uggly?) usage of floating perl data on perl
- script :-)
- * printer.pm: back to "Generic PostScript" for default printer (jloup).
- * printerdrake.pm: make sure an expert can choose among available
- devices.
-
-2000-09-25 dam's <damien@mandrakesoft.com>
-
- * network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
- /etc/resolv.conf if needed.
-
- * netconnect.pm : adsl connection does'nt need any dns anymore.
-
- * netconnect.pm (read_net_conf): created. draknet now stores and
- reload the config.
-
- * netconnect.pm (main): if the user is french and uses french
- keyboard, don't ask his country.
-
-2000-09-25 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: added 8139too
-
- * share/Cards+: GeForce2 DDR is handled by driver "nv"
-
- * Xconfigurator.pm (main): in killall X for Xdrakres, also killall
- kdm/xdm/gdm/autologin :)
-
-2000-09-25 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-25 dam's <damien@mandrakesoft.com>
-
- * network.pm (configureNetwork): Warn user if he already
- configured the interface.
-
-2000-09-24 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (mergein_conf): created. call read_conf, fills
- %modules::conf and set $modules::scsi
-
-2000-09-24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-24 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (bug): use first floppy drive instead of fd0 hard
- coded (nice for LS120's)
-
- * install_steps_gtk.pm (selectMouse): if device changed, do the
- test
- * standalone/mousedrake: fix for serial mice
- * install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (conf_network_card): now displays the modules of
- detected ethernet cards.
-
-2000-09-22 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): calls drakegw.
- * netconnect.pm (get_net_device): fixed
-
-2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - added logs
- - added verbose mode
- - fixed wrong stopping of named in other languages than english
-
- * netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard,
- choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
- ():
-
- * interactive.pm (ask_many_from_list): now only ask_many_from_list
- exists, obsoleting ask_many_from_list_ref and
- ask_many_from_list_with_help. More flexible and nicer
- * interactive_newt.pm (ask_many_from_listW): adapted to new
- calling type
- * interactive_gtk.pm (ask_many_from_listW): adapted to new calling
- type, handle 'shadow' and 'icon2f'
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
- * Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
- i810
- (testFinalConfig): i810 is a verybad_card, aka can't test anything
- on it :-(
- (main): fork to background and stay there while waiting for the WM
- to exit
- (testFinalConfig): update the backgroung image path
-
- * interactive_gtk.pm (exit): flush X before leaving (otherwise the
- mousecursor is not restored)
-
- * run_program.pm (rooted): don't redirect the stdout and stderr to
- ddebug.log if not $::isInstall
-
- * log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
- * modules.pm (load_raw): redirect stderr to tty5
-
- * install2.pm (main): set variable $::isInstall
-
-2000-09-22 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: now includes information from netconnect to
- ignore the interface used for Internet connection
-
-2000-09-22 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
- * netconnect.pm (get_net_device): added get_net_device to know
- which interface has been used to configure the internet connection.
- (conf_network_card): ask to restart network if dhcp too.
- (main): enable dialing when modem.
-
- * network.pm (configureNetworkIntf): changed label to warn people
- about already configured eth cards.
-
-2000-09-22 François Pons <fpons@mandrakesoft.com>
-
- * install_gtk.pm: added Desktop themes.
- * share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
- initial release.
- * install2.pm: moved back to all steps for live upgrade.
- * install_gtk.pm: select right logo if desktop.
- * install_steps_interactive, install_steps_gtk.pm: avoid asking if
- upgrade for a live upgrade.
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: add some call to log_sizes to log the
- installed size
-
- * install_steps_gtk.pm (installPackages): beep before changeMedium
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf): try to call the f translation
- function on the default value with the index
-
- * install_steps.pm (afterInstallPackages): make the gpg code work,
- changed the call to
- "gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
- * detect_devices.pm: cleanup and removed unused code
-
-2000-09-21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, netconnect.pm: changed NETWORKING reference
- from false to no.
- * printer.pm: changed timeout from 30 to 60.
- * printerdrake.pm: added wait message when waiting for cups to
- start.
- * pci_probing/pcitable: added erwan VIA Rhine board.
- * network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake: fix for XF4
-
- * Xconfigurator.pm (write_XF86Config): comment the omit
- xfree86-dga
-
- * install_steps.pm (afterInstallPackages): configure GPG public
- keyring with mandrake key
-
- * standalone/mousedrake: updated/fixed for new mouse handling
-
- * install2.pm (main): update for handling oem installs
-
- * many files: relGetFile cleanup, updated calls to getFile and
- getAndSaveFile accordingly
-
- * Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
- * detect_devices.pm (@netdevices): plip removed in standalone,
- otherwise plip is always there (because of kmod)
-
- * install_steps_interactive.pm (choosePartitionsToFormat): replace
- the die "cancel" by die "already displayed", so that no error is
- displayed.
-
- * pci_probing/pcitable: replace some rtl8139 by 8139too, added
- cards DELTA8139 and ADDTRON8139 (for jeff)
-
- * Xconfigurator.pm (show_info): also show the colordepth and
- resolution. don't show server if none, show XF4 driver if there's
- one.
- (main): change the "Forget the changes" to "Keep the changes?"
- with displaying the current configuration.
-
-2000-09-21 François Pons <fpons@mandrakesoft.com>
-
- * printer.pm: changed "PostScript" ppd default description to "Raw
- queue (no filtering)", asked by Till.
- * Xconfigurator.pm: add log of what user select for 3D hw
- acceleration.
- * share/compssList: changed XFree86-glide-module to -2 because the
- level is the same for XFree86-Glide* which may have multiple
- different version installed due to dependancies of the first one.
-
-2000-09-21 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (conf_network_card): added check when dhcp. Cable connection
- should now work.
-
-2000-09-21 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (exitInstall): call $o->exit if
- "Some steps are not completed"
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (install_loadlin_config_sys,
- install_loadlin_desktop): extracted from install_loadlin, do not
- call them anymore (remove it?)
- (suggest): put grub in lnx4win install
-
- * common.pm (availableRamMB): fixed (round to a multiple of 4)
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (get_info_isdn_providers & read_isdn_providers):
- read file in /usr/share and $prefix/usr/share
- (isdn_write_config): corrected file to be sh compliant.
- (isdn_write_config): added default route settings for isdn.
-
-2000-09-20 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume
-
-2000-09-20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume
-
- * standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: used new package install function.
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (isFloppyOrHD): detects wether a device is a
- floppy or not based on its size (for scsi floppy)
-
- * Xconfigurator.pm (testFinalConfig): check if "server" OR
- "driver" field is set (otherwise XF4 only card won't pass)
-
- * bootloader.pm (suggest): fix for ``installing the last cooker
- from kenobi:/I on an smp machine i don't get anymore an entry for
- linux-up'' (c chmouel)
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (get_pcmcia_devices): fix (especially, now ethernet
- should be detected)
-
- * lang.pm (get_langs): created, gives rpm install langs
- * install_any.pm (setPackages): give langs::get_langs() to
- readCompssList
- * pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
- $langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * netconnect.pm: make dhcp-client, pump and such not translatable.
- Those are program names and should therefore not be translated,
- that only confuses translators
-
-2000-09-19 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): corrected @users definition and
- passwd cat.
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * many files: changed some access to get_root to get_root_
-
- * install_steps_interactive.pm (choosePackages): added code for
- desktop meta_class install type
-
- * install_steps_gtk.pm (selectMouse): cleanup, give parameter
- emulate3buttons to setMouseLive
- * c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive*.pm: changed `suspend' and `resume' to behave as expected,
- added `enter_console' and `leave_console'
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
- META_CLASS
-
- * Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
- result (not enough VideoRam), also remove the found resolutions
- * Xconfigurator.pm (main): remove the automatic searching of
- resolutions
- * Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
- automatic searching of resolutions.
-
- * mouse.pm (fullnames): changed the `_' in `[' before Other
- (nicer, uh?)
-
- * install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-18 Dam's <damien@mandrakesoft.com>
-
- * Xconfigurator (autologin): do it eve, if newbie. Autologin is
- now in separated function.
-
-2000-09-18 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (testFinalConfig): don't skip the test in auto
- if called via "Test again"
- * Xconfigurator.pm (resolutionsConfiguration): ensure all depth
- are bounded
-
- * bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
- classic and no-fb
-
- * fsedit.pm (check_mntpoint): add a check for /etc /lib... which
- must not be mount points. Also check that /home, /tmp and /usr are
- on trueFS
-
- * interactive.pm (ask_from_entries_ref): add bounding of "val" in
- case of type "range". die if min > max.
-
-2000-09-18 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): nicer
- partition/device display
-
- * partition_table_raw.pm (zero_MBR): add on the fly require of the
- good partition_table_$type
-
- * detect_devices.pm (cdroms): fix (yet again) the scd$nb device
- assignment to ide burners
-
- * install_steps.pm (afterInstallPackages): comment out a part of
- the icons mess messing
-
- * Xconfigurator.pm (cardConfiguration): move Unlisted to
- Other/Unlisted
- * share/CardsNames: updated (for Voodoo5)
-
- * install_steps_gtk.pm (selectMouse): fix the test to know wether
- the guy has changed the mouse type (to know wether to test the
- mouse or not)
-
- * install_steps_interactive.pm (selectLanguage): add the license
-
- * install_steps_interactive.pm (choosePackages): have the
- "Recommended" size be the default
- (in the choice Minimum/Recommanded/Complete)
-
- * diskdrake.pm (Type): fix a typo
-
- * install_steps.pm (doPartitionDisksAfter): mark partition as
- mounted
-
-2000-09-17 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-17 Pixel <pixel@mandrakesoft.com>
-
- * install/pcmcia_config.patch: cleaned
-
- * diskdrake.pm (Create, Type): have type field not_editable
-
- * tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): move
- the setting of toFormat before asking for bad blocks, seems to fix
- things?? weird :-/
-
- * network.pm (miscellaneousNetwork): fix the setting of focus on
- error (tx2Thomas Poindessous :)
-
- * install_steps_interactive.pm (configurePrinter): changed
- "Cancel" to "None" (for Thomas Poindessous :)
-
- * printer.pm (poll_ppd_base): max polling time raised from 10s to
- 30s (for Till)
-
- * install_steps.pm (ask_mntpoint_s): don't force partition type to
- be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (set_help): save the help message displayed
- in $o->{current_help}
- * install_gtk.pm (create_big_help): display $o->{current_help}
-
- * mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.
- * install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
- * install2.pm (selectMouse): adapted for mouse::read now returning
- an hash ref
-
- * detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
- one function (now takes the device in the parameter)
-
- * interactive.pm (ask_from_treelistf): added (just like
- ask_from_listf, but with a tree)
-
- * Xconfigurator.pm: the reference is now nbuttons to
- know wether to put Emulate3Buttons or ZAxisMapping.
- * Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
- Banshee too.
-
- * Xconfig.pm: guess nbuttons based on Emulate3Buttons and
- ZAxisMapping.
-
- * common.pm (availableRamMB): replace availableRam, now use the
- size of /proc/kcore (what else to find the real ramsize?)
-
- * common.pm (cat__): created
-
- * install2.pm (main): add field meta_class in $o. Can be
- 'desktop', in case option desktop is given, or if /desktop/i is
- found in /VERSION
-
- * install_steps.pm (miscellaneous): for lnx4win, always have
- 'mem=' (so that the initrd is visible by both windows
-
- * install2.pm (main): add option "desktop"
-
- * install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
- * install_interactive.pm (partitionWizardSolutions):
- use only TrueFS for existing_part
- (partitionWizard): have only "loopback" for lnx4win
-
- * pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
- * share/Cards+: add Voodoo5
-
- * bootloader.pm (suggest): add entry linux-nonfb (called linux-up
- for smp)
-
-2000-09-14 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-12 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm, mouse.pm: moved probing serial port before to
- detect a wacom tablet (even if a PS/2 or USB mouse is found).
- * help.pm: corrected reference to previous version of LM (jloup).
- * install2.pm: removed duplicate code for getting network
- configuration, using network module.
- * netconnect.pm: intf is now a hash and no more an array.
- * network.pm: changed nature of intf to hash from array, reworked
- write_resolv_conf function to keep old code in comment but only
- when not used anymore (to make it easier by hand modification).
- * printer.pm: SOCKET accessible to expert only (jloup).
- * printerdrake.pm: local port only available for expert if a
- printer has been detected (jloup).
-
-2000-09-11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: reorganized choices of 3D optimizations, added
- experimental support for expert users.
- * install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: removed all previous URI specific mode and
- added socket and expert URI general mode.
- * printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added pnm2ppa and lm110 support in cups
- configuration. probe for printer device (parallel) and try to
- install usb for printer.
- * printer.pm: removed local printer configuration for cups (keep
- only local configuration using URI).
-
-2000-09-01 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
- is installed, make 16bits by default on 3D hardware acceleration,
- fixed selection of hardware for hardware acceleration.
- * install_steps.pm: add cups for printer configuration, used for
- auto_install. added new function to add packages only if requires
- are already satisfied.
- * standalone/printerdrake: updated.
-
-2000-08-31 dam's <damien@mandrakesoft.com>
-
- * moved many things to network.pm and any.pm
- * everything should be broken now.
-
-2000-08-31 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: removed printer default config (now obsoleted).
- * install_steps_interactive.pm: add cups support.
- * printerdrake.pm: add cups support.
- * printer.pm: add cups support.
-
-2000-08-31 Frederic Lepied <flepied@mandrakesoft.com>
-
- * install_any.pm (setPackages): install the right glide module
- according to the Voodoo card detected.
-
- * Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
- (autoDefaultDepth): default depth to 16 for Voodoo cards except
- for Voodo5 ones.
-
-2000-08-29 dam's <damien@mandrakesoft.com>
-
- * moved pppConfig in netconnect.pm and any.pm
- * moved miscellaneousNetwork in any
- * modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
- * install_steps_interactive.pm: change Small/Normal/Full ->
- Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28 dam's <damien@mandrakesoft.com>
-
- * draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
- and french alcatel ADSL implemented.
- * Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24 François Pons <fpons@mandrakesoft.com>
-
- * ../update_kernel*: changed reference from extract_archive to
- packadrake.
- * Makefile*: added live_install and live_install2.
- * Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
- Pro AGP card type, commented SiS and S3ViRGE support by GLX.
- * commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
- updated to use packdrake now.
- * install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
- manage live upgrade.
- * modules.pm: use standard modprobe command for load in live
- upgrade.
- * netconnect.pm: added minimal modification for being compilable.
- * rescue/list: added packdrake and sfdisk.
- * live_install, live_install2: live upgrade of package.
-
-2000-08-22 dam's <damien@mandrakesoft.com>
-
- * drakfuck (netconnect):finished isdn PCI/ISA card implemetation
- * added isdndb.net: providers database
-
-2000-08-20 dam's <damien@mandrakesoft.com>
-
- * moved Netconnect.pm to netconnect.pm
- * moved DrakFuck to drakfuck
-
-2000-08-18 Pixel <pixel@mandrakesoft.com>
-
- * share/Cards+: for i810, force VideoRam
-
-2000-08-18 dam's <damien@mandrakesoft.com>
-
- * modules.pm: added isdn type in @drivers_by_category. corrected
- load_thiskind (thx pixel) : it's not unsafe anymore
- * Netconnect.pm: just display PCI isdn card recognized.
-
-2000-08-17 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: many cleanup. moved some functions to common,
- any or install_interactive (newly created)
-
-2000-08-16 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm(configureNetwork): added call to
- isdn configuration
- * added standalone/DrakFuck: standalone entry point to configure
- internet connexion.
- * added Netconnect.pm: internet connexion functions.
-
-2000-08-11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectInstallClass): yet a bigger
- warning so that people don't choose expert installs. Also set the
- focus on "Custom" by default.
-
- * install_steps_interactive.pm (doPartitionDisks): created, calls
- the wizard.
- * install_steps.pm (doPartitionDisksBefore,
- doPartitionDisksAfter): created (was mainly in
- install2::doPartitionDisks)
- * install2.pm (doPartitionDisks): much cleanup
- * install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08 Pixel <pixel@mandrakesoft.com>
-
- * standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
- cdrom addmedia
-
-2000-08-07 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Resize):
- * install_steps_gtk.pm (doPartitionDisks): remove the
- before_leaving ensuring the filehandle is closed
- * resize_fat/main.pm (DESTROY): use a better solution for ensuring
- the filehandle is closed
-
-2000-08-07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added SiS6326 in the list of chipset that
- needVideoRam, reported on ml.
- * install_steps.pm: fixed auto install of printer.
-
-2000-08-06 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf): created this GREAT function
- that should have been created a long time ago.
- * any.pm, install_any.pm, install_steps_gtk.pm,
- install_steps_interactive.pm: a lot of rewrite to use the new
- ask_from_listf, a lot of nice cleanup!
-
- * fs.pm (df): created, returns the free space of the part. Save it
- in $part->{free}
-
- * install_steps_gtk.pm (doPartitionDisks): ensure the closing of
- the device in case of error
- * resize_fat/main.pm (new): ensure the closing of the device in
- case of error
-
- * install_any.pm (partitionWizard): the great partitioning wizard
- is created. Not finished yet (nor called from anywhere)
-
- * install_steps.pm (doPartitionDisksLnx4win): created function out
- of doPartitionDisks
-
- * install_steps_gtk.pm (installPackages): removed the displaying
- of size to install (people are bothered cuz not the same size)
-
-2000-08-06 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_steps_window): use drawing area
- instead of button. Implemented all steps events.
-
-2000-08-05 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): test a hack for usb mouse via hub
- (sparhawk@enteract.com)
-
- * fsedit.pm (undo): force isDirty and needKernelReread only if hd
- hasBeenDirty, otherwise believe the flag saved
- * partition_table.pm (write): flag hd as hasBeenDirty
-
- * install2.pm: a few renaming of methods so that the step names
- correspond to install2 function and install_steps* methods (eg:
- configureX & setupXfree unified to configureX)
-
-2000-08-04 dam's <damien@mandrakesoft.com>
-
- * any.pm (setAutoLogin): added this method to write xdm-config
- * Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
- it in case of max_size reached. only purpose is the log!
-
- * install_steps_interactive.pm (choosePackages): in newbie, ask
- between Small/Medium/Full install
- * install_steps_interactive.pm (choosePackages): in expert, have
- the min_mark be 0 instead of 1
-
- * common.pm (find_index): added this nice function
-
- * install_any.pm (getAvailableSpace_mounted): use common::df
- * loopback.pm (getFree): use common::df
- * commands.pm (df): use common::df
- * common.pm (df): added
-
- * diskdrake.pm (Resize)): add resizing of reiserfs
- * share/list.i386: add resize_reiserfs
-
-
-2000-08-02 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm : autologin is functionall. When wmsession.d is
- more up to date, I'll add the list of wm to launch at boot. It
- writes in /etc/X11/xdm/xdm-config.
-
-2000-08-01 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (miscellaneous): modify as chmouel want (aka, ""
- instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
- * services.pm: separation between interaction and action.
- * install_steps.pm (servicesConfig): the job is now done here
- * install_steps_interactive.pm (servicesConfig): only the asking
- part
-
-2000-08-01 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed the below fixe, now ok.
- * Xconfigurator.pm: fixed a bug for using default card flags
- setting, add support for GeForce DDR for both 3.3 and 4.0.
- * pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
- XFree 3.3 as unsupported in XFree 4.0.
- * share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed provided package with choice in deps used with a
- base package, complicated but kernel-fb or similar can be
- unselected now.
-
-2000-07-27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: changed expert message to ask
- using XFree 3.3 instead of XFree 4.0 used by default (server).
- * Xconfigurator.pm: make sure only one server is installed,
- default to XFree 4.0 if supported unless XFree 3.3 accept
- 3D acceleration and not XFree 4.0, ask user in such case.
- * pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: applied new LN stars, logo title and help
- logo. improved steps appearences.
- * modified share/step-*.xpm
- * added share/help.xpm
- * updated ../HACKING to ling help logo.
-
-2000-07-21 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: enable 3D acceleration configuration with
- XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
- Utah-GLX accelerated module.
-
-2000-07-20 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
- {miscellaneous}{autologuser} + {miscellaneous}{autologing}.
- * move some README content to ../HACKING
-
-2000-07-19 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: added autologin boxes.
- result is in {miscellaneous}{autologin} and in
- {miscellaneous}{autologuser}
-
-2000-07-19 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: added default root to existing root device when adding
- an entry in bootloader.
- * bootloader.pm: avoid duplicating entry (floppy and old-floppy)
- when they are identical.
- manage hackkernel by suggest an entry by default if installed.
- * install_steps.pm: reworked symlink closure for bootloader
- to keep previous configuration.
-
-2000-07-11 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
- this include a configure_entry from silo.pm to build a initrd if
- used.
- * share/compssList: added kde2 packages.
- * share/compssUsers: added kde2 group, renamed kde to kde1 group
- specific.
-
-2000-07-07 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm (choosePackages): always execute setPackage to copy
- hdlist* and depslist files (support mixed partitionDisks and
- choosePackages).
- * install_any.pm (setPackages): avoid clearing upgrade flag.
- * install_steps.pm (choosePackages): use $first_time to avoid
- reselection of packages according to compssList.
- * install_steps_interactive (choosePackages): use $first_time and
- $individual to avoid reselection of packages according if user go
- back to step choosePackages.
- * pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
- depslist files in /var/lib/urpmi.
- * diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: better approach for Sun* server in newbie.
- * fs.pm: added romfs support for mount.
- * fsedit.pm: changed auto allocation for partitions for sparc*.
- * install2.pm: restored bootdisk creation and auto install boot
- disk creation for sparc*.
- * install_any.pm: changed vfat to romfs when mounting kickstart
- floppy on sparc*.
- * install_steps.pm: avoid proposing formating sunos partition.
- * install_steps_interactive.pm: boot disk for sparc* and support for
- installation of SILO on /boot partition (sparc*).
- * install_steps_newt.pm: removed cylinder 0 bug warning.
- * interactive.pm: fixed typo for not_edit set to 1 by default.
- * partition_table.pm: fixed get_holes on sparc* where a whole disk
- partition caused problems.
- * partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
- * silo.pm: handle /boot partition, install silo.conf in /boot and
- make a symlink from /etc.
- * share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: changed the way console font data is written; not all
- of the [0], [1], [2] values must defined, so three cases must be used.
- Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
- be used by console-tools to load the proper compose table
-
-2000-06-20 François Pons <fpons@mandrakesoft.com>
-
- * c/sbus.c: added some functions for silo.c integration.
- * c/silo.c: initial release including write in prom, and translation
- of disk name from openprom to linux, rh version modified.
- * silo.pm: added write in prom, support of sunos boot from silo.
- * partition_table.pm: added support for ufs partition like windows one.
- * install_steps_interactive.pm: added other entries in silo.
- * install_steps.pm: support sunos partition.
- * install_any.pm: automatically mount sunos partition with diskdrake.
- * fsedit.pm: added /mnt/sunos suggested mount point.
- * fs.pm: added ufs support for mount.
-
-2000-06-19 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: modified for getting sparc crypto file for sparc*.
- * modules.pm: make sure to load sd_mod when needed.
- * pci_probing/main.pm: always use loaw_endian in pci structs.
- * pci_probing/translate-pcitable.pl: added arch specific module name
- translation.
-
-2000-06-16 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): rename conf.modules to modules.conf if
- needed. Outputs to modules.conf
-
- * detect_devices.pm (cdroms): fix using scd0 for ide-burners when
- already a scsi cdrom drive
-
-2000-06-13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: added SunOS partition as blue for diskdrake.
- * install_steps_interactive.pm: make sure of no division by zero may
- happen.
- * install_steps_newt.pm: added WARNING for fdisk on sparc*.
- * modules.pm: make sure of loading sd_mod module after any scsi module.
- * sbus_probing/main.pm: insmod openprom before trying sbus probing.
- * pkgs.pm: corrected by use of parabolic solution for size approximation.
- * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * install_steps.pm,lang.pm: added load_console_font, to load the
- proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
- * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
- it fits better with the other fonts. Added a 'README' file with
- some comments and the required copyright notice
-
-2000-05-29 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added support for SBUS card autodetection.
- * commands.pm: added lssbus to list SBUS devices detected.
- * detect_devices.pm: removed alpha restriction on USB.
- * install_steps_interactive.pm: added SBUS support.
- * c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
- * c/stuff.xs.pm: added wrapper for sbus.c interface.
- * sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
- * share/list.ppc: various PPC modifications, for HFS
- * partition_table_mac.pm: bug fixes
- * partition_table.pm: various HFS fixes, isHiddenMacPart()
- * diskdrake.pm: added HFS to top buttons when run on PPC
- * keyboard.pm: fixed name of mac-fr2-ext keymap
- * install_steps_gtk.pm: added Xpmac server support for PPC.
- * install_steps_interactive.pm: disallow hardware configuration on PPC for
- now. All drivers should be in the kernel. setup_this_kind().
- * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
- our partition table read. Added PPC grep condition for PPC in get_visible_fstab.
- * fs.pm: fix argument for HFS formatting.
- * Makefile: special installation of PPC files.
-
-2000-05-25 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
- alpha|sparc.
-
-2000-05-25 François Pons <fpons@mandrakesoft.com>
-
- * silo.pm: added configure_entry to try creating an initrd for an image
- entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
- * commands.pm: fixed insmod command to take modules64.cz* on sparc*
- * install2.pm: removed create boot disk and create auto install disk on
- sparc*. force writing of /etc/conf.modules for step setupBootloader.
- * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
- * install_steps_interactive.pm: added missing $prefix for glob_. call
- configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
- * modules.pm: updated alias for sparc*.
- * any.pm: fixed proprable wrong test for setupBootloader in beginner at
- the very beginning.
- * printer.pm: fixed typo.
- * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
- resolution for these server too.
-
-2000-05-24 François Pons <fpons@mandrakesoft.com>
-
- * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
- * partition_table_sun.pm: fixed a bug when reading partition table
- with unused partition in the middle of the table.
-
-2000-05-23 François Pons <fpons@mandrakesoft.com>
-
- * common.pm: update arch to take into account sparc and sparc64. added
- better_arch and compat_arch function.
- * silo.pm: fixed adding new kernel automatically.
- * install2.pm: removed create boot disk stuff for sparc*.
- * install_steps.pm: added initrd generation for alpha. added ldconfig
- at end of installation. removed /usr/bin/dumpkeys existence test on
- sparc*, should be added in the future.
- * install_steps_interactive.pm: removed supermount for sparc*.
- * install_steps_gtk.pm: added /dev/kbd device creation and permedia2
- support for sparc*. removed screen limit of 1024x768.
- * detect_devices.pm: fixed problem on machine with really no IDE interface.
- * modules.pm: added support for 32 and 64 bit architectures on sparc*.
- * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
- partition.
- * pkgs.pm: added support for multi-arch rpm file (need for sparc*),
- fixed correctSize and invCorrectSize to take back a linear approximation
- above 9Gb approximatively. removed ftp rewind as broken currently.
- * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
- globing (removed) against existing '*'.
- * partition_table.pm: removed support for non SUN partition table, as it
- may freeze the kernel or may be blanked?
- * Xconfigurator.pm: take Sun24 server by default on sparc*, add support
- for permedia2 card (3DLabs server).
- * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
- * Makefile: added support for modules and modules64 for sparc*.
- * c/stuff.xs.pm: added kernel_arch function for getting the current true
- architecture provided by the kernel (uname -m).
-
-2000-05-09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (kdeicons_postinstall): the URL link to doc must
- be $lang/index.html, not only $lang.
-
- * standalone/mousedrake: add handling of XF86Config-4
-
- * any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the touch of some files here to please linuxconf
-
- * install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
- * lilo.pm (install_grub): don't keep symlinks for reiserfs
- * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
- * install_any.pm (getHds): default mount point for windobe in
- lowercased for StartOffice(!)
-
-2000-05-08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
- Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
- * keyboard.pm: Added new Lithuanian keyboard and changed the
- string for brazilian ABNT-2 to state more clearly its ABNT nature
- (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): return availableCorrected
- instead of available
-
- * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
- * modules.pm (text2driver): same as text2lang below
- * keyboard.pm (text2keyboard): same as text2lang below
- * lang.pm (text2lang): replace the while (... each) by a foreach
- (keys) (because each is dangerous if loop is exited)
-
- * install_steps_interactive.pm (selectKeyboard): better handling
- of multiple langs question.
-
- * ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
- * install_steps_interactive.pm (setup_thiskind): remove ide-*
- from modules displayed as loaded.
-
-2000-05-06 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (check_mntpoint): verify that standard mntpoints (/
- /usr) are not on not trueFS
-
- * any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * printerdrake.pm: fixed English error
-
-2000-05-05 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): remove the special case
- for fbdev.
-
- * install_steps_interactive.pm (setup_thiskind): replace return by
- next in case load_module fails.
-
- * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
- * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
- * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
- * pkgs.pm (correctSize): updated for 7.1
-
- * install_any.pm (getAvailableSpace): move the removing of
- $minAvailableSize here.
-
-2000-05-04 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (configurePrinter): give clicked to printerConfig
-
- * interactive.pm (ask_from_entries_ref): set default val if not_edit
-
- * interactive_newt.pm (ask_from_entries_refW): remove setting of
- default val. Now done in interactive::ask_from_entries_ref
-
- * interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
- * modules.pm (read_already_loaded): ensure that already loaded
- modules are put in %loaded.
- * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
- * lilo.pm (install_lilo): truncate label's to 15 chars
-
- * install_any.pm (generate_ks_cfg): fix missing space
- * install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
- * install2.pm: get rid of autoformat
- * install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (setupBootloader): replace ask_many_from_list by
- ask_from_list for bootloader choice
-
- * services.pm (drakxservices): stop immediately service if removed
-
- * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
- * install_steps.pm (afterInstallPackages): touch some files to
- please linuxconf
-
-2000-05-03 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: updated min size, fixed kppprc generation.
- * install_any.pm: make sure postinstall-rpm is here before
- erasing (avoid error on reboot only).
-
-2000-05-02 Pixel <pixel@mandrakesoft.com>
-
- * raid.pm (format_part): don't call raid::make if part is already
- formatted (as raidstop fails)
-
- * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
- more
-
- * install_steps_interactive.pm (setup_thiskind): make insmod'ing
- fail a simple warning.
-
- * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
- * share/MonitorsDB: take new one from RedHat
-
- * standalone/drakboot: added kfloppy
-
- * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
- not to have it)
-
-2000-05-01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): remove
- NIS_server, use NIS instead
- * install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
- * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): fix yet another bug for
- ttf from windobe handling
-
- * install_steps_interactive.pm (selectInstallClass): hide beginner
- mode in corporate. Display special help.
-
-2000-04-29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
- text to be properly aligned (reported by Craig Chang
- <craig_chang@taipei.siscomm.com.tw>)
- * common.pm: now that po handling is correct, I changed the order
- of reading variables so that it follows the standards ($LANGUAGE first)
- * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28 François Pons <fpons@mandrakesoft.com>
-
- * install_steps*.pm: added support for selection of package during
- upgrade the same way it is done for installation. added check of
- minimal size, abort else (at least let the user know about :-)
- fixed crypto if no network interface available.
- * install2.pm: fixed problem during upgrade that lost network
- configuration.
-
-2000-04-28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_raw): don't call commands::insmod, do it in
- place. Merge with load_multi
-
- * install_steps.pm (afterInstallPackages): fix windobe ttfonts
- symlinking
-
- * Xconfigurator.pm (cardConfiguration): load module agpgart for
- i810
-
- * install_any.pm (getHds): changed the mount point setting for
- windows partitions as device_windobe is not unique
-
-2000-04-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_steps_window): changed to adapt to
- new hidden format
-
- * install2.pm (@installSteps): changed the way hidden is handled.
- Now it is a true perl expression (great power now)
-
- * install_steps_gtk.pm (selectInstallClass1): update steps window
- before asking normal/devel/server. Nicer!
-
- * install_steps_interactive.pm (configureNetwork): when "Cancel"
- pressed at network interface configuration do not skip all
- configuration.
-
-2000-04-26 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm (pppConfig): modified a lot, removed template
- file for ifcfg and chat file.
-
-2000-04-26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): use a fix width for
- the tree column (so that the checkbox are always visible without
- scrolling)
-
- * standalone/drakboot: drakfloppy and gfloppy are X only, no need
- to propose them in console
-
- * install_any.pm (relGetFile): added auto_inst to files to get
- from Mandrake/base
-
- * install2.pm (main): changed auto_inst behaviour
-
- * standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
- * interactive_newt.pm (ask_from_entries_refW): now handling
- complete/changed/focus_out callbacks (at least more than before)
-
- * Newt/Newt.xs: added rough callback handling
-
-2000-04-25 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added support for PPA more easily, allow
- printers entry using ppa driver event if pnm2ppa not installed,
- install it if neccessary after.
- * network.pm, install_steps.pm, install_steps_interactive.pm:
- added support for stoping a network interface, usefull for ppp0 to
- avoid using it too long.
- * install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (install): moved the generation of the keytable here. It
- is used by both lilo & grub (lilo is not always installed as was
- assumed)
-
- * common.pm (formatAlaTeX): remove bounding spaces
-
- * pkgs.pm (setSelectedFromCompssList): remove the hack for min
- mark 25 in beginner
- * install_steps_interactive.pm (choosePackages): set $min_mark to
- 25 in beginner
-
-2000-04-24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setupXfree): add a yesorno
- question for choosing between XF4 and XF3 in expert
-
- * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
- * install_any.pm (update_userkderc): make sure uid and gid are kept
-
- * diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
- * partition_table.pm (add_extended): handle a 3rd arg,
- $extended_type to tell which kind of extended partition is wanted
- * partition_table.pm (adjust_main_extended): in non-expert,
- automatically set extended to linux-extended if there's only
- linux-type partitions.
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
- * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
- and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed crazy mutli CD manipulation.
- * printer.pm: fixed wrong prototype of print_pages.
- * install2.pm: set version to 7.1 for crypto stuff.
- * crypto.pm: commented ackbar crypto site.
-
-2000-04-17 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
- linuxconf)
-
-2000-04-14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): don't
- ask about checking bad blocks for reiserfs, cuz not handled
-
- * fs.pm (mount): reiserfs handling
- * fs.pm (format_reiserfs): added
- * fs.pm (write_fstab): add option "notail" for reiserfs if
- the partition holds the kernel (/boot or /)
-
- * partition_table.pm (isTrueFS): added, replaces most occurences
- of isExt2
-
-2000-04-12 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: force installation step if package have been
- selected on step choose packages.
- * install_any.pm: protected against die in perl (setstep or
- theme_changed).
-
-2000-04-11 François Pons <fpons@mandrakesoft.com>
-
- * resize_fat: added some limits verification.
- * interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10 François Pons <fpons@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
- which is used by printerdrake only. drops key bindings.
-
-2000-04-07 François Pons <fpons@mandrakesoft.com>
-
- * tools/serial_probe: obsoleting pnp_serial which is now replaced
- by this one, taken from kudzu, really faster and probe all serial
- devices at one time. modified to probe correctly modem :-)
- * mouse.pm: updated to use serial_probe interface of
- detect_devices.pm.
- * detect_devices.pm: modified to use serial_probe, cache probed
- devices to avoid reprobing.
-
-2000-04-06 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps.pm: added support
- for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm, install_steps_interactive.pm, install2.pm,
- install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
- and depslist-crypto. dependancies are not supported but with a
- simpler format of depslist file where closure are not done and
- only package name are used for dependancies.
- * pkgs.pm: added better support for multi CD manipulation,
- including selection and refus.
-
-2000-04-04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: modified selection packages from compssList by
- incremental selection, much more quickly.
- added selected medium for selecting a package.
- * install_any.pm: refused media hash transfered to selected value
- of media table.
- @needToCopy list should only have package of default medium.
-
-2000-04-03 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: made changeMedium sub modification
- permanent.
- * pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30 François Pons <fpons@mandrakesoft.com>
-
- * install2pm: added eval around loading af_packet and postinstall
- copy of RPMS.
- * devices.pm: added /dev/kdb for SPARC.
- * install_any.pm: modified multi CD management, postinstall copy
- of RPMS.
- * install_steps_gtk.pm: added support for Xsun server for SPARC.
- * install_steps_interactive.pm: added multi CD dialog box for
- selecting CD available. Serialized ethernet configuration and ppp
- configuration.
- * pkgs.pm: added check for infinite recursion for bad depslist.
- * printer.pm: better test for reparse of printerdb.
- * Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
- * install_steps_interactive.pm (generateAutoInstFloppy): created,
- creates a floppy for auto installs.
-
- * install_any.pm (generate_ks_cfg): created, generates stage1
- ks.cfg file
-
- * share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): sort langs for
- many-lang install
-
- * mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (install_urpmi): full support for multi-hdlist's
-
- * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
- $prefix/var/lib/urpmi
- * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
- fake name. Access via /tmp/$hdlist is given for non-fake name
-
- * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm: updated to the new format of entries. It was an hash.
- Now the key is field kernel_or_dev, and entries is an array.
-
- (get): added, it returns the entry using a kernel
- (needed because entries is no more a hash)
-
- * install_steps_interactive.pm (setupLILO): adapted to the new format
-
- * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling
-
- * fsedit.pm (suggest_part): if suggested part contains a field
- "hd", ensure the partition is created on this hard drive
-
- * install2.pm (main): before leaving installation, remove
- /var/lib/urpmi if urpmi not installed
-
- * diskdrake.pm (Resize): ext2resize to size $part->{size} instead
- of $size
-
-2000-03-24 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (hasHPT): added. Now nice handling of hpt366
- (ultra66) without rebooting and making special floppy :)
-
- * lilo.pm (install_grub): much better grub configuration (better
- than lilo's :pp)
-
- * install_steps.pm (setupBootloaderBefore): remove entry floppy
- for security > 3
-
-2000-03-23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectMouse): added, takes care of telling
- the X server if the user changed the mouse type. Only done if
- a serial mouse is chosen.
-
- * install_steps_newt.pm (doPartitionDisks): add a call to
-
- * mouse.pm (write): added "device=" in etc/sysconfig/mouse for
- devfs (it looses the symlink /dev/mouse)
-
-2000-03-22 Pixel <pixel@mandrakesoft.com>
-
- * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm, fs.pm, install_any.pm: added supports for
- LS-120 floppy drive and icons on desktop of KDE (untested).
- * printer.pm, printerdrake.pm: added supports for PPA interface in
- new rhs-printfilters, always enable "Print text as postscript"
- option for such printers.
-
-2000-03-20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: changed XKB name for Swedish keyboard
- changed XKB names for Russian and German keyboards
- added a choice for "Croatian" keyboard
- * share/compss{,List}: added various new locales-*, ispell-*
- and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: added setup for all configured queue.
- * install_steps_interactive.pm: modified for retrieving packages
- or current configuration.
- * printer.pm: correction, tested retrieve of printer
- configuration without printtool comments in printcap file: added
- update of entry according to gsdriver used (untested again).
- * printerdrake.pm: better handling of cancel, manage of multiple
- queue definition together (as lp|My printer).
-
-2000-03-16 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: moved in printerdrake.pm the test
- of printer usage.
- * printerdrake.pm: heavy modification to handle multiple queue,
- corrected some bugs too, added much more features as printtool.
- * printer.pm: added more features for filter, allow printer to be
- retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Loopback): handling of the file loopback: test
- existence of the file and take its size.
-
-2000-03-14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm, install_any.pm: small correction for multiple media
- installation.
- * tools/syncrpms: added for handling synchronisation of multiple source
- rpm directories (and multiple target), include cleaning.
- * tools/closurepkgs: tools to get rpm that may be installed by DrakX
- after normal packages installation (printer, network, X11...), may
- be used to duplicate on other CD some important stuff of the first
- one.
-
-2000-03-12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): compute the
- max_size very simply (sum of all package sizes), otherwise too costly
-
- * pkgs.pm (install): call cleanHeaders at the end
- * pkgs.pm (cleanHeaders): created
-
- * install2.pm (miscellaneous): /etc/msec/init.sh is now
- /usr/sbin/msec (yoann thanks for not telling :pp)
-
- * pkgs.pm (install): remove the $prefix of mountpoints for not
- enough room to install error message
-
-2000-03-11 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (_create_window): add callback on focus to
- ensure_focus. The result is no more 3 focus states with 2 buttons.
-
- * interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
- * raid.pm (make): check the result of mkraid. Suggest raidtools
- are missing in standalone diskdrake
-
- * devices.pm (set_loop): created, searches for an available
- loopback and sets the file to it
-
- * lilo.pm (dev2grub): fixed a missing slash
-
- * interactive_gtk.pm (wait_message_nextW): do not update if same
- message, otherwise silly gtk won't do anything and we'll wait
- forever :(
-
-2000-03-10 François Pons <fpons@mandrakesoft.com>
-
- * *.pm: heavy modification to take into account multiple media
- installation.
-
-2000-03-10 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (@install_classes): cleanup, no more i18n (is now in
- install_steps_interactive), remove old entries
-
-2000-03-09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): don't add alias block-major-11 in every case
- * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
- * fs.pm (format_*): move the @options before the device
-
- * loopback.pm: created, added a lot of stuff for loopback in
- diskdrake.pm, fs.pm...
-
-2000-03-08 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: %type2fs replaced ox402 by 0x402
-
- * detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
- * install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
- * install_steps_interactive.pm (addUser): force add a normal user
- for security 4
-
-2000-03-05 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
- (tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): add ide-floppy to the modprobes of
- post-install supermount
-
-2000-03-03 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
- * mouse.pm: added mac mouse detection to mouse::detect.
- * detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01 François Pons <fpons@mandrakesoft.com>
-
- * *.pm: heavy modification to take into account smaller
- transaction during installation.
- still a lot of test to perform, no provides updated currently and
- building of hdlist.cz2 and depslist.ordered need old files...
- nothing done for hdlist.gz during post installation, but
- hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
- installation of packages as extract_archive need a true file].
-
-2000-03-01 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (install_grub): creation
-
- * network.pm (write_interface_conf): ONBOOT = !pcmcia
-
- * install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: moved common network stuff from "net" to "network"
- (modules like nfs lockd...)
-
- * fs.pm (write_fstab): moved the sort to the right place
-
- * services.pm (drakxservices): chkconfig --list is i18n'ed :(
- set LANGUAGE=C before
-
- * partition_table_raw.pm (get_geometry): geom{cylinders} must not
- be a decimal value :)
-
- * install_steps_gtk.pm (create_logo_window): set_name logo for
- logo window
- * share/install.rc: force disabling of background image theme
-
- * install_steps_gtk.pm (enteringStep): add step information for
- console 1
-
- * any.pm (addKdmIcon): new function
- * install_steps.pm (addUser): handle field icon
- * install_steps_interactive.pm (addUser): add choice of kdm icon
- * standalone/adduserdrake: add choice of kdm icon
-
- * diskdrake.pm (ask_all_data...): change for easier i18n
-
- * install_steps.pm (miscellaneous): add CLEAN_TMP handling
- (need cleaning?)
- * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
- option in expert
- * install2.pm (miscellaneous): add CLEAN_TMP option for
- /etc/sysconfig/system
-
- * install_steps_interactive.pm (miscellaneous): forbidden
- useSupermount if high security.
-
- * mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
- svga and accel. SVGA also wants 16 bpp. added ugly modeline for
- 800x600.
-
- * partition_table_raw.pm (get_geometry): when the
- HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
- * install2.pm (main): use modules::load_multi to increase boot
- start time
-
- * modules.pm (load_multi): added this function for loading many
- modules at once.
-
- * install_steps_gtk.pm (new): increase time before timeout
-
- * detect_devices.pm (cdroms): change the device associated with
- ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(
-
- * modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): load ide-probe and the like in 'prereq' type
- so no aliases are added to conf.modules
-
-2000-02-25 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm (make): small code cleanup
-
- * partition_table_raw.pm (adjustEnd): more explicit error message
-
- * fsedit.pm (allocatePartitions): fix a bug (size was getting too
- big after each allocation) making adjustEnd cry
-
-2000-02-24 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (new): added the "new" method to initialize
- windowheight for isStandalone
-
- * install_steps_gtk.pm (new): returns undef in case no X server
- works
-
- * install2.pm (main): moved the ejectCdrom from install_steps::END
- to here
- * install2.pm (main): fix the $SIG{SEGV} handler
- * install2.pm (main): added a "try again" in text install if the
- "new" fails
-
- * install_steps_interactive.pm (createBootdisk): fix an error for
- non fdX choice of floppy drive
-
- * install_steps_interactive.pm (setup_thiskind): remove the
- "defined @l"
-
-2000-02-23 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (%suggestedPartitions): remove any /boot entries
- * install2.pm (selectInstallClass): removed the special code to
- /boot entries from suggestedPartitions for on non-intel (and it
- was buggy :)
- * fsedit.pm (@suggestions): remove the /boot entry
- * fsedit.pm (check_mntpoint): remove the 1024 cylinder check
- * fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
- * install_steps_interactive.pm (setupLILO): replace linear option
- by lba32
-
- * lilo.pm (suggest): add lba32 by default
-
- * install_steps_interactive.pm (load_thiskind): moved the HPT
- stuff to install_any::ultra66 and call it.
- Add sound card configuration (3 lines :)
-
- * my_gtk.pm and interactive_gtk: resize the list and tree based on
- root window size
-
- * install_steps_gtk: $width and $height goes $::rootwidth and
- $::rootheight, also other dimensions goes global (main::)
-
- * commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23 François Pons <fpons@mandrakesoft.com>
-
- * build_archive, extract_archive: changed format of TOC to speed
- up extraction of archive, now 5 to 6 times faster to read TOC :-)
-
-2000-02-22 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: load "Cards" database only to translate NAME
- to fields. Added file CardsNames created from Cards using
- share/Cards2CardsNames. Kind of list of normalized NAMEs
-
- * MonitorsDB: replace the ` ' separator for vendor by `|'
-
- * install_steps_interactive.pm (timeConfig): use ask_from_treelist
-
- * interactive_gtk.pm (ask_from_treelist): creation of
- ask_from_treelist. Usage is just the same as ask_from_list with
- one more argument (the separator eg: |, /)
-
-2000-02-21 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: fixed deadlock while trying to create partition
- when available space is equal or less than 2 cylinders. fixed
- Create action on corrupted partition by removing stalling window.
- Blocked partition table writing if there are error by forcing user
- to correct partition table.
- * partition_table.pm: fixed typo in verifyParts with cdie, added
- verifyParts on Resize action.
-
-2000-02-21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_big_help): display the help in full
- screen
-
- * my_gtk.pm (_create_window): add big help on F1
-
- * common.pm (add2hash): now returns the first parameter
-
- * mouse.pm (detect): really defaults to serial mouse
-
- * interactive.pm: add ask_many_from_list_with_help and
- ask_many_from_list_with_help_ref
-
- * services.pm: creation, it handles what was in
- standalone/drakxservices
-
-2000-02-18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (createXconf): added /dev/ (X wants
- "/dev/psaux" and not "psaux")
-
- * diskdrake.pm (Create): show start sector even for non-expert on
- non-i386
-
-2000-02-16 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): add defaults to serial mouse
-
- * install_steps_gtk.pm (createXconf): remove the defaults to
- serial mouse
-
-2000-02-15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: "After %s partition %s," inlined otherwise does
- not please pablo and translators...
-
-2000-02-14 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm (get_geometry): do not use the cylinder
- number given by HDIO_GETGEO cuz limited to 16bits. Compute using
- the total_sectors using HDIO_GET_IDENTITY
-
- * c/stuff.xs.pm: added total_sectors (gives the number of sector
- of a drive)
-
- * modules.pm (load): ignore error in loading prereq's
-
- * modules.pm (@drivers_by_category): rcpci instead of rcpci45,
- z85230 added
-
- * commands.pm (mount): add modules::load_deps otherwise the
- fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11 François Pons <fpons@mandrakesoft.com>
-
- * fixed diskdrake to handle limit case when creating and resizing
- partition table, address size limit and start sector limit.
-
-2000-02-11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): add a callback on SEGV
- -> message printed
- -> that way, ENDs are called (otherwise skipped)
-
- * install_steps_interactive.pm (setup_thiskind): handles the undef
- value returned by load_thiskind
-
- * install_steps_interactive.pm (exitInstall): do not call
- install_steps::exitInstall
-
- * install_steps (exitInstall): removed
- * install_steps (END): added (it does ejectCdrom)
-
- * install_steps_interactive.pm (load_thiskind): returns undef if
- error loading a module
-
- * fs.pm (format_part): changed the prototype from $;$@ to $;@
- otherwise, @options always have a value (mostly undef) and mkdosfs
- fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
- * install_steps_interactive.pm (setup_thiskind):
- add a $auto_probe_pci that overrules $o->{auto_probe_pci}
- (that way no pci probe the second time)
-
-2000-02-10 François Pons <fpons@mandrakesoft.com>
-
- * heavy modification of build_archive and extract_archive to manage
- a TOC directly in archive file, handle bzip2 or gzip compression,
- extract_archive can extract multiple files a time, with minimal
- invocation of uncompress program and follow symlink and expand
- directory contents.
- * use build_archive/extract_archive for locales.
- * fixed a min/max in install_steps_gtk for Resize/Create partition.
- * fixed adjustEnd with dos partition table, take care of magic 63
- sectors at beginning of partitions, a more solid method should be
- used for that.
-
-2000-02-10 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (add): cdie if maximum number of partitions
- handled by linux is reached
-
- * Xconfigurator.pm (chooseResolutionsGtk): display the graphic
- card or server found
-
- * install_any.pm (relGetFile): for mdkinst files, take care not to
- have a double '/' (see debbugs #591)
-
- * install_steps_interactive.pm (configureNetwork):
- purpose: add ability to configure both modem and lan
- clean up the behaviour
-
- * fs.pm (write_fstab):
- purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
- also: rewrite of the part writing the fstab.