diff options
Diffstat (limited to 'move')
| -rw-r--r-- | move/data/keyfiles | 1 | ||||
| -rw-r--r-- | move/move.pm | 197 | ||||
| -rw-r--r-- | move/todo | 5 |
3 files changed, 115 insertions, 88 deletions
diff --git a/move/data/keyfiles b/move/data/keyfiles index 230e5f788..c5fd00525 100644 --- a/move/data/keyfiles +++ b/move/data/keyfiles @@ -93,3 +93,4 @@ /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.old /etc/X11/XF86Config.old +/etc/X11/X diff --git a/move/move.pm b/move/move.pm index 32cb9dabc..373bf407f 100644 --- a/move/move.pm +++ b/move/move.pm @@ -13,6 +13,7 @@ use lang; use Digest::MD5 qw(md5_hex); my @ALLOWED_LANGS = qw(en_US fr es it de); +our $using_existing_config; sub symlinkf_short { my ($dest, $file) = @_; @@ -109,14 +110,22 @@ sub init { eval { modules::load('usb-storage', 'sd_mod') }; install_steps::setupSCSI($o); system('sysctl -w kernel.hotplug="/sbin/hotplug"'); - handleMoveKey($o); + key_mount($o); + key_installfiles('simple'); + if (`getent passwd 501` =~ /([^:]+):/) { + $o->{users} = [ { name => $1 } ]; + $using_existing_config = 1; + } drakx_stuff: $o->{steps}{handleI18NClp} = { reachable => 1, text => "Handle I18N CLP" }; $o->{steps}{verifyKey} = { reachable => 1, text => "Verify Key" }; + $o->{steps}{configMove} = { reachable => 1, text => "Configure Move" }; $o->{steps}{startMove} = { reachable => 1, text => "Start Move" }; $o->{orderedSteps_orig} = $o->{orderedSteps}; - $o->{orderedSteps} = [ qw(selectLanguage handleI18NClp acceptLicense verifyKey selectMouse selectKeyboard startMove) ]; + $o->{orderedSteps} = [ $using_existing_config ? + qw(handleI18NClp startMove) + : qw(selectLanguage handleI18NClp acceptLicense verifyKey selectMouse selectKeyboard configMove startMove) ]; $o->{steps}{first} = $o->{orderedSteps}[0]; #- don't use shadow passwords since pwconv overwrites /etc/shadow hence contents will be lost for usb key @@ -144,52 +153,13 @@ sub lomount_clp { run_program::run('mount', '-r', $dev, $dir); } -sub install_TrueFS_in_home { - my ($o) = @_; - - require fsedit; - my $home = fsedit::mntpoint2part('/home', $o->{fstab}) or return; - - my %loopbacks = map { - my $part = { - type => 0x483, - device => "/home/.mdkmove-$_", - loopback_file => "/.mdkmove-$_", loopback_device => $home, - mntpoint => "/home/$_/.mdkmove-truefs", size => 5 << 11, - toFormat => ! -e "/home/.mdkmove-$_", - }; - $_ => $part; - } list_users(); - $home->{loopback} = [ values %loopbacks ]; - fsedit::recompute_loopbacks($o->{all_hds}); - - $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ]; - install_steps_interactive::formatMountPartitions($o); - - foreach my $user (keys %loopbacks) { - my $dir = $loopbacks{$user}{mntpoint}; - run_program::run("/bin/chown", "$user.$user", $dir); - - foreach (qw(.kde)) { - if (-d "/home/$user/$_" && ! -d "$dir/$_") { - run_program::run('mv', "/home/$user/$_", "$dir/$_"); - } - mkdir $_ and run_program::run("/bin/chown", "$user.$user", $_) - foreach "/home/$user/$_", "$dir/$_"; - - run_program::run('mount', '-o', 'bind', "$dir/$_", "/home/$user/$_"); - } - $ENV{ICEAUTHORITY} = "$dir/.ICEauthority"; - } -} - sub install2::handleI18NClp { my $o = $::o; lomount_clp("always_i18n_$o->{locale}{lang}", '/usr'); } -sub keys_parts { +sub key_parts { my ($o) = @_; my @keys = grep { $_->{usb_media_type} && index($_->{usb_media_type}, 'Mass Storage|') == 0 && $_->{media_type} eq 'hd' } @{$o->{all_hds}{hds}}; @@ -200,7 +170,7 @@ sub keys_parts { } fsedit::get_fstab(@keys); } -sub handleMoveKey { +sub key_mount { my ($o, $o_reread) = @_; if ($o_reread) { @@ -209,7 +179,7 @@ sub handleMoveKey { } require fs; - fs::mount_part($_) foreach keys_parts($o); + fs::mount_part($_) foreach key_parts($o); } sub machine_ident { @@ -217,6 +187,35 @@ sub machine_ident { md5_hex(join '', (map { (split)[1] } cat_('/proc/bus/pci/devices'))); } +sub key_installfiles { + my ($mode) = @_; + + mkdir '/home/.sysconf'; + my $sysconf = '/home/.sysconf/' . machine_ident(); + + if (!-d $sysconf || cat_('/proc/cmdline') =~ /\bcleankey\b/) { + $mode eq 'full' or return; + eval { rm_rf $sysconf }; + mkdir $sysconf; + foreach (chomp_(cat_('/image/move/keyfiles'))) { + mkdir_p("$sysconf/" . dirname($_)); + system("cp $_ $sysconf$_"); + symlinkf("$sysconf$_", $_); + } + system("cp /image/move/README.adding.more.files /home/.sysconf"); + } else { + foreach (chomp_(`find $sysconf -type f`)) { + my ($path) = /^\Q$sysconf\E(.*)/; + mkdir_p(dirname($path)); + symlinkf($_, $path); + } + } + + #- /etc/sudoers can't be a link + unlink($_), system("cp /image/$_ $_") foreach qw(/etc/sudoers); +} + + sub install2::verifyKey { my ($o) = $::o; @@ -238,13 +237,13 @@ Operating System.")), ok => N("Detect again USB key"), cancel => N("Continue without USB key") }) or return; - handleMoveKey($o, 'reread'); + key_mount($o, 'reread'); } local *F; while (!open F, '>/home/.touched') { - fs::umount_part($_) foreach keys_parts($o); + fs::umount_part($_) foreach key_parts($o); modules::unload('usb-storage'); #- it won't notice change on write protection otherwise :/ $o->ask_okcancel_({ title => N("Key isn't writable"), @@ -256,58 +255,34 @@ unplug it, remove write protection, and then plug it again.")), modules::load('usb-storage'); sleep 2; - handleMoveKey($o, 'reread'); + key_mount($o, 'reread'); } close F; unlink '/home/.touched'; my $wait = $o->wait_message(N("Setting up USB key"), N("Please wait, setting up system configuration files on USB key...")); - - mkdir '/home/.sysconf'; - my $sysconf = '/home/.sysconf/' . machine_ident(); - if (!-d $sysconf || cat_('/proc/cmdline') =~ /\bcleankey\b/) { - rm_rf $sysconf; - mkdir $sysconf; - foreach (chomp_(cat_('/image/move/keyfiles'))) { - mkdir_p("$sysconf/" . dirname($_)); - system("cp $_ $sysconf$_"); - symlinkf("$sysconf$_", $_); - } - system("cp /image/move/README.adding.more.files /home/.sysconf"); - } else { - foreach (chomp_(`find $sysconf -type f`)) { - my ($path) = /^\Q$sysconf\E(.*)/; - mkdir_p(dirname($path)); - symlinkf($_, $path); - } - } - #- /etc/sudoers can't be a link - unlink($_), system("cp /image/$_ $_") foreach qw(/etc/sudoers); - + key_installfiles('full'); $wait = undef; - } -sub install2::startMove { +sub install2::configMove { my $o = $::o; - + #- just in case lomount_clp("always_i18n_$o->{locale}{lang}", '/usr'); if (cat_('/proc/cmdline') =~ /\buser=(\w+)/) { - $o->{users} = [ { name => $1 } ]; + $o->{users} = [ { name => $1 } ]; } else { - require any; - any::ask_user_one($o, $o->{users} ||= [], $o->{security}, - additional_msg => N("BLA BLA user for move, password for screensaver"), noaccept => 1, needauser => 1, noicons => 1); + require any; + any::ask_user_one($o, $o->{users} ||= [], $o->{security}, + additional_msg => N("BLA BLA user for move, password for screensaver"), noaccept => 1, needauser => 1, noicons => 1); } #- force uid/gid to 501 as it was used when mounting key, addUser may choose 502 when key already holds user data put_in_hash($o->{users}[0], { uid => 501, gid => 501 }); require install_steps; install_steps::addUser($o); - install_TrueFS_in_home($o); - my $wait = $o->wait_message(N("Auto configuration"), N("Please wait, detecting and configuring devices...")); #- automatic printer, timezone, network configs @@ -335,8 +310,49 @@ N("An error occurred, but I don't know how to handle it nicely. Continue at your own risk."), formatError($@) ]) if $@; } } +} - $wait = undef; +sub install_TrueFS_in_home { + my ($o) = @_; + + require fsedit; + my $home = fsedit::mntpoint2part('/home', $o->{fstab}) or return; + + my %loopbacks = map { + my $part = { + type => 0x483, + device => "/home/.mdkmove-$_", + loopback_file => "/.mdkmove-$_", loopback_device => $home, + mntpoint => "/home/$_/.mdkmove-truefs", size => 5 << 11, + toFormat => ! -e "/home/.mdkmove-$_", + }; + $_ => $part; + } list_users(); + $home->{loopback} = [ values %loopbacks ]; + fsedit::recompute_loopbacks($o->{all_hds}); + + $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ]; + install_steps::formatMountPartitions($o); + + foreach my $user (keys %loopbacks) { + my $dir = $loopbacks{$user}{mntpoint}; + run_program::run("/bin/chown", "$user.$user", $dir); + + foreach (qw(.kde)) { + if (-d "/home/$user/$_" && ! -d "$dir/$_") { + run_program::run('mv', "/home/$user/$_", "$dir/$_"); + } + mkdir $_ and run_program::run("/bin/chown", "$user.$user", $_) + foreach "/home/$user/$_", "$dir/$_"; + + run_program::run('mount', '-o', 'bind', "$dir/$_", "/home/$user/$_"); + } + $ENV{ICEAUTHORITY} = "$dir/.ICEauthority"; + } +} + +sub install2::startMove { + my $o = $::o; $::WizardWindow->destroy if $::WizardWindow; require ugtk2; @@ -345,7 +361,8 @@ Continue at your own risk."), formatError($@) ]) if $@; my ($w, $h) = ($pixbuf->get_width, $pixbuf->get_height); $root->draw_pixbuf(Gtk2::Gdk::GC->new($root), $pixbuf, 0, 0, ($::rootwidth - $w) / 2, ($::rootheight - $h)/2, $w, $h, 'none', 0, 0); ugtk2::gtkflush(); - + + install_TrueFS_in_home($o); run_program::run('/sbin/service', 'syslog', 'start'); run_program::run('killall', 'minilogd'); #- get rid of minilogd run_program::run('/sbin/service', 'syslog', 'restart'); #- otherwise minilogd will strike back @@ -373,15 +390,21 @@ Continue at your own risk."), formatError($@) ]) if $@; sub automatic_xconf { my ($o) = @_; - log::l('automatic XFree configuration'); - require Xconfig::default; - $o->{raw_X} = Xconfig::default::configure({ KEYBOARD => 'uk' }, $o->{mouse}); #- using uk instead of us for now to have less warnings + if ($using_existing_config) { + print "MandrakeMove is using existing host configuration\n"; - require Xconfig::main; - require class_discard; - Xconfig::main::configure_everything_auto_install($o->{raw_X}, class_discard->new, {}, - { allowNVIDIA_rpms => [], allowATI_rpms => [], allowFB => $o->{allowFB} }); + } else { + log::l('automatic XFree configuration'); + + require Xconfig::default; + $o->{raw_X} = Xconfig::default::configure({ KEYBOARD => 'uk' }, $o->{mouse}); #- using uk instead of us for now to have less warnings + + require Xconfig::main; + require class_discard; + Xconfig::main::configure_everything_auto_install($o->{raw_X}, class_discard->new, {}, + { allowNVIDIA_rpms => [], allowATI_rpms => [], allowFB => $o->{allowFB} }); + } } @@ -41,5 +41,8 @@ have not the necessary packages and we don't want to provide) usb key +/etc/X11/X + is a link but vfat doesn't handle links :( + /etc/X11/XF86Config-4 - - needs to mount the key even before drakx opens xfree + changing screen resolution doesn't get saved because file is re-created in /etc/X11, loosing link to usb-key
\ No newline at end of file |