diff options
Diffstat (limited to 'mdk-stage1/rp-pppoe/configs')
| -rw-r--r-- | mdk-stage1/rp-pppoe/configs/firewall-masq | 35 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/configs/firewall-standalone | 32 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/configs/pap-secrets | 9 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/configs/pppoe-server-options | 5 | ||||
| -rw-r--r-- | mdk-stage1/rp-pppoe/configs/pppoe.conf | 126 |
5 files changed, 0 insertions, 207 deletions
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-masq b/mdk-stage1/rp-pppoe/configs/firewall-masq deleted file mode 100644 index cb16fbecf..000000000 --- a/mdk-stage1/rp-pppoe/configs/firewall-masq +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh -# -# firewall-masq This script sets up firewall rules for a machine -# acting as a masquerading gateway -# -# Copyright (C) 2000 Roaring Penguin Software Inc. This software may -# be distributed under the terms of the GNU General Public License, version -# 2 or any later version. - -# Interface to Internet -EXTIF=ppp+ - -ANY=0.0.0.0/0 - -ipchains -P input ACCEPT -ipchains -P output ACCEPT -ipchains -P forward DENY - -ipchains -F forward -ipchains -F input -ipchains -F output - -# Deny TCP and UDP packets to privileged ports -ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY -ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY - -# Deny TCP connection attempts -ipchains -A input -l -i $EXTIF -p tcp -y -j DENY - -# Deny ICMP echo-requests -ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY - -# Do masquerading -ipchains -A forward -j MASQ -echo 1 > /proc/sys/net/ipv4/ip_forward diff --git a/mdk-stage1/rp-pppoe/configs/firewall-standalone b/mdk-stage1/rp-pppoe/configs/firewall-standalone deleted file mode 100644 index bcb1e92b1..000000000 --- a/mdk-stage1/rp-pppoe/configs/firewall-standalone +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/sh -# -# firewall-standalone This script sets up firewall rules for a standalone -# machine -# -# Copyright (C) 2000 Roaring Penguin Software Inc. This software may -# be distributed under the terms of the GNU General Public License, version -# 2 or any later version. - -# Interface to Internet -EXTIF=ppp+ - -ANY=0.0.0.0/0 - -ipchains -P input ACCEPT -ipchains -P output ACCEPT -ipchains -P forward DENY - -ipchains -F forward -ipchains -F input -ipchains -F output - -# Deny TCP and UDP packets to privileged ports -ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY -ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY - -# Deny TCP connection attempts -ipchains -A input -l -i $EXTIF -p tcp -y -j DENY - -# Deny ICMP echo-requests -ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY - diff --git a/mdk-stage1/rp-pppoe/configs/pap-secrets b/mdk-stage1/rp-pppoe/configs/pap-secrets deleted file mode 100644 index f4483a723..000000000 --- a/mdk-stage1/rp-pppoe/configs/pap-secrets +++ /dev/null @@ -1,9 +0,0 @@ -# Edit this file and place it in /etc/ppp/pap-secrets - -#User #Server #Password #IP -bxxxxx@sympatico.ca * my_password * - -# Replace bxxxxx@sympatico.ca with your Sympatico user-ID -# Replace my_password with your Sympatico password - -# For Magma, use xxyyzz@magma.ca diff --git a/mdk-stage1/rp-pppoe/configs/pppoe-server-options b/mdk-stage1/rp-pppoe/configs/pppoe-server-options deleted file mode 100644 index 8319870ac..000000000 --- a/mdk-stage1/rp-pppoe/configs/pppoe-server-options +++ /dev/null @@ -1,5 +0,0 @@ -# PPP options for the PPPoE server -require-pap -login -lcp-echo-interval 10 -lcp-echo-failure 2 diff --git a/mdk-stage1/rp-pppoe/configs/pppoe.conf b/mdk-stage1/rp-pppoe/configs/pppoe.conf deleted file mode 100644 index 9f77b913c..000000000 --- a/mdk-stage1/rp-pppoe/configs/pppoe.conf +++ /dev/null @@ -1,126 +0,0 @@ -#*********************************************************************** -# -# pppoe.conf -# -# Configuration file for rp-pppoe. Edit as appropriate and install in -# /etc/ppp/pppoe.conf -# -# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and -# adsl-status shell scripts. It is *not* used in any way by the -# "pppoe" executable. -# -# Copyright (C) 2000 Roaring Penguin Software Inc. -# -# This file may be distributed under the terms of the GNU General -# Public License. -# -# $Id$ -#*********************************************************************** - -# When you configure a variable, DO NOT leave spaces around the "=" sign. - -# Ethernet card connected to ADSL modem -ETH=eth1 - -# ADSL user name. You may have to supply "@provider.com" Sympatico -# users in Canada do need to include "@sympatico.ca" -# Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets -# contains the right username/password combination. -# For Magma, use xxyyzz@magma.ca -USER=bxxxnxnx@sympatico.ca - -# Bring link up on demand? Default is to leave link up all the time. -# If you want the link to come up on demand, set DEMAND to a number indicating -# the idle time after which the link is brought down. -DEMAND=no -#DEMAND=300 - -# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2; -# NOCHANGE=do not adjust. -DNSTYPE=SERVER - -# Obtain DNS server addresses from the peer (recent versions of pppd only) -USEPEERDNS=yes - -DNS1= -DNS2= - -### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT - -# How long adsl-start waits for a new PPP interface to appear before -# concluding something went wrong. If you use 0, then adsl-start -# exits immediately with a successful status and does not wait for the -# link to come up. Time is in seconds. -# -# WARNING WARNING WARNING: -# -# If you are using rp-pppoe on a physically-inaccessible host, set -# CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying -# to connect forever after adsl-start is called. Otherwise, it will -# give out after CONNECT_TIMEOUT seconds and will not attempt to -# connect again, making it impossible to reach. -CONNECT_TIMEOUT=30 - -# How often in seconds adsl-start polls to check if link is up -CONNECT_POLL=2 - -# Specific desired AC Name -ACNAME= - -# Specific desired service name -SERVICENAME= - -# Character to echo at each poll. Use PING="" if you don't want -# anything echoed -PING="." - -# File where the adsl-connect script writes its process-ID. -# Three files are actually used: -# $PIDFILE contains PID of adsl-connect script -# $PIDFILE.pppoe contains PID of pppoe process -# $PIDFILE.pppd contains PID of pppd process -CF_BASE=`basename $CONFIG` -PIDFILE="/var/run/$CF_BASE-adsl.pid" - -# Do you want to use synchronous PPP? "yes" or "no". "yes" is much -# easier on CPU usage, but may not work for you. It is safer to use -# "no", but you may want to experiment with "yes". "yes" is generally -# safe on Linux machines with the n_hdlc line discipline; unsafe on others. -SYNCHRONOUS=no - -# Do you want to clamp the MSS? Here's how to decide: -# - If you have only a SINGLE computer connected to the ADSL modem, choose -# "no". -# - If you have a computer acting as a gateway for a LAN, choose "1412". -# The setting of 1412 is safe for either setup, but uses slightly more -# CPU power. -CLAMPMSS=1412 -#CLAMPMSS=no - -# LCP echo interval and failure count. -LCP_INTERVAL=20 -LCP_FAILURE=3 - -# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL -PPPOE_TIMEOUT=80 - -# Firewalling: One of NONE, STANDALONE or MASQUERADE -FIREWALL=NONE - -# Linux kernel-mode plugin for pppd. If you want to try the kernel-mode -# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so -LINUX_PLUGIN= - -# Any extra arguments to pass to pppoe. Normally, use a blank string -# like this: -PPPOE_EXTRA="" - -# Rumour has it that "Citizen's Communications" with a 3Com -# HomeConnect ADSL Modem DualLink requires these extra options: -# PPPOE_EXTRA="-f 3c12:3c13 -S ISP" - -# Any extra arguments to pass to pppd. Normally, use a blank string -# like this: -PPPD_EXTRA="" - - |