diff options
Diffstat (limited to 'make_boot_img')
| -rwxr-xr-x | make_boot_img | 286 |
1 files changed, 29 insertions, 257 deletions
diff --git a/make_boot_img b/make_boot_img index 2a309d8bb..e4bea7468 100755 --- a/make_boot_img +++ b/make_boot_img @@ -1,300 +1,72 @@ #!/usr/bin/perl -@ARGV >= 2 or die "usage: $0 <image> cdrom|hd|network|blank|pcmcia|live|tftp|tftprd\n"; - -use Config; -Config->import; -my ($arch) = $Config{archname} =~ /(.*)-/; -my $corporate = $ENV{CORPORATE} && " corporate"; #- use this for building a corporate version. +@ARGV >= 2 or die "usage: $0 <image> cdrom|hd|network|network_ks\n"; ($img, $type) = @ARGV; -$instdir = "install"; -$mnt = "/tmp/drakx_mnt"; -$mke2fs = "/sbin/mke2fs -q -m 0 -F -s 1"; - +$ks = "kickstart=floppy" if $type =~ s/_ks//; +$mnt = "/mnt/disk"; if ($>) { $sudo = "sudo"; $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}"; } -sub __ { print @_, "\n"; system(@_); } -sub _ { __ @_; $? and die; } - -_ "$sudo mkdir $mnt" unless -e $mnt; -_ "$sudo mkdir ${mnt}2" unless -e "${mnt}2"; $install = $ {{ - blank => "full-install", - live => "full-install", - tftp => "full-install", - tftprd => "full-install", - pcmcia => "full-install", network => "install", cdrom => "local-install", - hd => "local-install", - live64 => "full-install", - tftp64 => "full-install", - tftprd64 => "full-install", - pcmcia64 => "full-install", - network64 => "install", - cdrom64 => "local-install", - hd64 => "local-install", + hd => "local-install" }}{$type} or die; -$img =~ /rdz$/ ? initrd($mnt, $img) : $::{"boot_img_$arch"}->($mnt, $img); +$0 =~ /initrd/ ? + initrd($mnt, $img) : + boot_img($mnt, $img); + +sub __ { print @_, "\n"; system(@_); } +sub _ { __ @_; $? and die; } -sub install_s { _ "strip $_[0]"; _ "$sudo install $_[0] $_[1]" } sub initrd { my ($mnt, $img) = @_; - my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type; my $tmp = "$ENV{HOME}/tmp/initrd"; - my $tar = "$instdir/install1_$type.$arch.tar.bz2"; - -e $tar or $tar = "$instdir/install1.$arch.tar.bz2"; + + _ "install -s install/installinit/init install/install1/sbin/init"; + _ "install -s install/$install install/install1/sbin/install"; __ "$sudo umount $tmp $mnt 2>/dev/null"; _ "dd if=/dev/zero of=$tmp bs=1k count=2000"; - _ "$mke2fs $tmp"; - _ "$sudo mount -t ext2 $tmp $mnt -o loop"; - - _ "$sudo tar xyC $mnt -f $tar"; - install_s("$instdir/installinit/init", "$mnt/sbin"); - install_s("$instdir/$install", "$mnt/sbin/install"); - - _ "$sudo cp -f install_${type}_modules/* $mnt/modules/" if -d "install_${type}_modules"; - _ "$sudo cp -f modules$I/${ltype}_modules.cgz $mnt/modules/modules$I.cgz" if $type !~ /blank/; - _ "$sudo cp -f modules$I/modules.dep $mnt/modules/"; + _ "echo y | mke2fs $tmp"; + _ "$sudo mount $tmp $mnt -o loop"; + _ "$sudo cp -a install/install1/* $mnt"; + _ "$sudo install -d $mnt/modules"; + _ "$sudo cp -f modules/${type}_modules.cgz $mnt/modules/modules.cgz"; + _ "$sudo cp -f modules/modules.dep $mnt/modules/"; _ "$sudo umount $mnt"; - -# Workaround for vfat-loop bug (quite touchy) - _ "gzip -9f $tmp"; - _ "cp -f $tmp.gz $img"; - _ "rm -f $tmp.gz"; -# _ "gzip -9 -c $tmp > $img"; -# _ "rm -f $tmp"; + _ "gzip -9 -c $tmp > $img"; + _ "rm -f $tmp"; } -sub boot_img_i386 { +sub boot_img { my ($mnt, $img) = @_; __ "$sudo umount $mnt 2>/dev/null"; - if ($type eq "hd") { - _ "bunzip2 -c $instdir/installinit/msgboot.img.bz2 > $img"; - } else { - _ "bunzip2 -c $instdir/installinit/msgboot-graphicallogo.img.bz2 > $img"; - } - _ "$sudo mount -t msdos -o umask=0 $img $mnt -o loop"; - _ "cat vmlinuz > $mnt/vmlinuz" if $type !~ /blank/; - -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd("${mnt}2", "$mnt/$type.rdz"); + _ "bunzip2 -c install/installinit/emptyboot.img.bz2 > $img"; + _ "$sudo mount -o umask=0 $img $mnt -o loop"; + _ "cat vmlinuz > $mnt/vmlinuz"; + initrd("${mnt}2", "$mnt/initrd.gz"); - my $timeout = 72; output("$mnt/syslinux.cfg", " default linux -prompt 1 -timeout $timeout -display boot.msg -F1 help.msg -F2 boot.msg +prompt 0 label linux kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type vga=788 -label vgalo - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type vga=785 -label vgahi - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type vga=791 -label vga16 - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type vga16 -label text - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type text -label patch - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type patch vga=788 -label expert - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type expert vga=788 -label rescue - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type rescue rw -label oem - kernel vmlinuz - append ramdisk_size=32000 initrd=cdrom.rdz cdrom rescue oem rw -label auto - kernel vmlinuz - append ramdisk_size=32000 initrd=$type.rdz $type auto_install=auto_inst.cfg.pl -"); - _ "sync"; - _ "df $mnt"; -} - -sub boot_img_alpha { - my ($mnt, $img) = @_; - - __ "$sudo umount $mnt 2>/dev/null"; - _ "dd if=/dev/zero of=$img bs=1k count=1440"; - _ "$mke2fs $img"; - _ "/sbin/e2writeboot $img /boot/bootlx"; - _ "$sudo mount -t ext2 $img $mnt -o loop"; - _ "cp -f vmlinux.gz $mnt" if $type !~ /blank/; - -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd("${mnt}2", "$mnt/$type.rdz"); - - mkdir "$mnt/etc", 0777; - output("$mnt/etc/aboot.conf", -"0:vmlinux.gz initrd=$type.rdz rw ramdisk_size=32000 $type -1:vmlinux.gz initrd=$type.rdz rw ramdisk_size=32000 text $type + append $ks initrd=initrd.gz mdkinst $type "); + _ "cp -f install/installinit/ks.cfg $mnt 2>/dev/null" if $ks; _ "sync"; - _ "df $mnt"; } -sub boot_img_sparc { - my ($mnt, $img) = @_; - if ($type =~ /^live(.*)/) { - #- hack to produce directly into /export the needed file for cdrom boot. - my $dir = "/export"; - my $boot = "boot"; #- non-absolute pathname only! - - _ "mkdir -p $dir/$boot"; - _ "cp -f /boot/cd.b /boot/second.b $dir/$boot"; - _ "cp -f vmlinux$1 $dir/$boot/vmlinux$1"; - -f "live$1.rdz" ? _ "cp -f live$1.rdz $dir/$boot" : initrd("${mnt}2", "$dir/$boot/live$1.rdz"); - - output("$dir/$boot/silo.conf", " -partition=1 -default=linux -timeout=100 -read-write -message=/$boot/boot.msg -image=\"cat /$boot/boot.msg\" - label=1 - single-key -image=\"cat /$boot/general.msg\" - label=2 - single-key -image=\"cat /$boot/expert.msg\" - label=3 - single-key -image=\"cat /$boot/rescue.msg\" - label=4 - single-key -image=\"cat /$boot/kickit.msg\" - label=5 - single-key -image=\"cat /$boot/param.msg\" - label=6 - single-key -image[sun4c,sun4d,sun4m]=/$boot/vmlinux - label=linux - alias=install - initrd=/$boot/live.rdz - append=\"ramdisk_size=32000$corporate\" -image[sun4c,sun4d,sun4m]=/$boot/vmlinux - label=text - initrd=/$boot/live.rdz - append=\"ramdisk_size=32000 text$corporate\" -image[sun4c,sun4d,sun4m]=/$boot/vmlinux - label=expert - initrd=/$boot/live.rdz - append=\"ramdisk_size=32000 expert$corporate\" -image[sun4c,sun4d,sun4m]=/$boot/vmlinux - label=ks - initrd=/$boot/live.rdz - append=\"ramdisk_size=32000 ks$corporate\" -image[sun4c,sun4d,sun4m]=/$boot/vmlinux - label=rescue - initrd=/$boot/live.rdz - append=\"ramdisk_size=32000 rescue rw root=/dev/ram3$corporate\" -image[sun4u]=/$boot/vmlinux64 - label=linux - alias=install - initrd=/$boot/live64.rdz - append=\"ramdisk_size=32000$corporate\" -image[sun4u]=/$boot/vmlinux64 - label=text - initrd=/$boot/live64.rdz - append=\"ramdisk_size=32000 text$corporate\" -image[sun4u]=/$boot/vmlinux64 - label=expert - initrd=/$boot/live64.rdz - append=\"ramdisk_size=32000 expert$corporate\" -image[sun4u]=/$boot/vmlinux64 - label=ks - initrd=/$boot/live64.rdz - append=\"ramdisk_size=32000 ks$corporate\" -image[sun4u]=/$boot/vmlinux64 - label=rescue - initrd=/$boot/live64.rdz - append=\"ramdisk_size=32000 rescue rw root=/dev/ram3$corporate\" -"); - - output("$dir/$boot/README", " -To Build a Bootable CD-ROM, try: - mkisofs -R -o t.iso -s /$boot/silo.conf /export -"); - } elsif ($type =~ /^tftprd(.*)/) { - my $dir = "/export"; - my $boot = "images"; - my $setarch = $1 ? "sparc64" : "sparc32"; - _ "mkdir -p $dir/$boot"; - -f "$type.rdz" or initrd("${mnt}2", "$type.rdz"); - _ "cp -f vmlinux$1.aout $dir/$boot/$type.img"; - _ "$setarch kernel$1/src/arch/sparc$1/boot/piggyback $dir/$boot/$type.img kernel$1/boot/System.map $type.rdz"; - } elsif ($type =~ /^tftp(.*)/) { - my $dir = "/export"; - my $boot = "images"; - - _ "mkdir -p $dir/$boot"; - _ "cp -f vmlinux$1.aout $dir/$boot/$type.img"; - } else { - my $dir = "floppy"; - my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type; - - __ "$sudo umount $mnt 2>/dev/null"; - _ "rm -rf $dir"; - _ "mkdir -p $dir"; - _ "cp -f /boot/fd.b /boot/second.b $dir"; - _ "cp -f vmlinuz$I $dir/vmlinux$I.gz" if $type !~ /blank/; - -f "$type.rdz" ? _ "cp -f $type.rdz $dir" : initrd("${mnt}2", "$dir/$type.rdz"); - - output("$dir/boot.msg", " -Welcome to Linux-Mandrake 7.1 - -Press <Enter> to install or upgrade a system 7mLinux-Mandrake7m -"); - - output("$dir/silo.conf", " -partition=1 -default=linux -timeout=100 -read-write -message=/boot.msg -image=/vmlinux$I.gz - label=linux - initrd=/$type.rdz - append=\"ramdisk_size=32000 $ltype$corporate\" -"); - _ "genromfs -d $dir -f /dev/ram -A 2048,/.. -a 512 -V \'DrakX boot disk\'"; - _ "$sudo mount -t romfs /dev/ram $mnt"; - _ "silo -r $mnt -F -i /fd.b -b /second.b -C /silo.conf"; - _ "$sudo umount $mnt"; - _ "dd if=/dev/ram of=$type.img bs=1440k count=1"; - _ "sync"; - _ "$sudo mount -t romfs /dev/ram $mnt"; - _ "df $mnt"; - } -} - -sub boot_img_ppc { - my ($mnt, $img) = @_; - # Here's a quick hack... just to give the script somethign to do. :) - # We do not yet have a set way of making bootable images. - _ "cp $type.rdz $img"; -} sub output { my $f = shift; |