diff options
Diffstat (limited to 'docs')
38 files changed, 0 insertions, 4228 deletions
diff --git a/docs/.cvsignore b/docs/.cvsignore deleted file mode 100644 index a0593a470..000000000 --- a/docs/.cvsignore +++ /dev/null @@ -1 +0,0 @@ -pictures diff --git a/docs/9.0_errata.txt b/docs/9.0_errata.txt deleted file mode 100644 index 4fec8885c..000000000 --- a/docs/9.0_errata.txt +++ /dev/null @@ -1,108 +0,0 @@ -# This file contains all the bugs/glitches/inconsistencies shipped in -# 9.0 (Dolphin) Mandrake Linux Release. - -# Feel free to add your entry and if possible the fixes and status of -# the errata. - - o Drakxtools: - ========== - - widget libraries: - - In both XFdrake and printerdrake pop up small, empty, gray windows when - clicking in the main menu. STATUS: Not fixed. - - Scroll bars and widget sizes often not correct (visible primarily in the - printer options step of the "Add printer" wizard of printerdrake. STATUS: - Not fixed. - - harddrake: - - logdrake: - IS: Send the alert mail when service is stopped but the mail - is empty. - SHOULD BE: incorporate a text on which service is stopped. - Status: not fixed. - - o Drakconf: - ========= - IS: locale nl_NL, sl and zh_CN prevent drakconf from starting with - a "cannot call set_active on undefined values" error. - - SHOULD BE: work well in all locales. - - a workaround has been comitted - - o Drakfont: - ========= - - drakfont get stopped in stat64("/mnt/nt/winnt/fonts/8514oem.fon", - ...) on ntfs partitions. - there's a bug in ntfs.o fs module of the kernel - - o Install: - ======== - - o urpmi: - ====== - - "urpmi mplayer" shows a list of libraries it needs and asks whether - to install all this, after saying "y", it says that all these - packages are missing and fails (I have shown it to François and he - says that is a bug with the "contribs". He had to regenerate the - hdlists somehow. STATUS: Not fixed. - - o XFree 4.2.x: - ============ - - Touchpad mouse on my Asus S8600 notebook. Worked out-of-the-box - with Mandrake 8.2, but in 9.0 I cannot do any dragging operation - with the PS/2-"Standard" mouse setting. I switched to "Glidepoint" - with mousedrake and then dragging works, but the emulation of the - third button by pressing both buttons not. Adding the lines - - Option "Emulate3Buttons" - Option "Emulate3Timeout" "50" - - to the mouse section of /etc/X11/XF86Config-4 manually fixes the - middle-button problem. STATUS: Not fixed. - - - - Sometimes, XFree86 can cause sound glitches because of intensive - pci bus usage. - Adding the line - - Option "PciRetry" "true" - - to the "Device" section /etc/X11/XF86Config-4 fixes these boxes. - - - I810 driver is bogus: when Xrender extension is in use (antialiased - fonts), X11 may crash upon vt switch. - is fixed in devel branch of cvs - - - o Printer drivers: - ================ - - "Best Grayscale" mode of HP DeskJet 6xx and Apollo printers does - not work. STATUS: Fixed on linuxprinting.org, needs to be packaged - in "printer-drivers". - -o kernel: - ======= - - Sometimes reboot stops on "illegal seek" message (having /usr on / - fs fix it) - - Sometimes process get blocked in D-state on ntfs partitions (see - drakfont) - - i810_audio mistakely say to modules.pm through modules.*map it - handles nforces whereas it lacks some workaround nvidia and alsa - uses. - workaround: perl-install/patch/patch-nforce.pl - - snd-via686 is said to produce background noise since alsa-0.9.0rc3 - workaround: switch to via82cxxx_audio (oss driver) through draksound diff --git a/docs/9.1_errata.txt b/docs/9.1_errata.txt deleted file mode 100644 index fa73c200e..000000000 --- a/docs/9.1_errata.txt +++ /dev/null @@ -1,65 +0,0 @@ -# This file contains all the bugs/glitches/inconsistencies shipped in -# 9.1 (Bamboo) Mandrake Linux Release. - -# Feel free to add your entry and if possible the fixes and status of -# the errata. - - - o DrakConf: - ========= - - - #2439: menudrake failled to run for users other than root and - xserver owner - - - #3415: do not kill "explicitely non embeddable" processes when - killing embedded tools - - both fixed in 9.1-12mdk - - - - o DrakxTools: - =========== - - drakconnect: - o ltmodem support is missing from mdk9.1 [added in hp release] - o various other fixes came into mdk4hp release - - - explanations: most common ones are not logged because of a - standalone.pm vs common.pm methods overloading bug [not yet - fixed] - - - harddrake-ui: - o menu entry starts logdrake instead of harddrake's gui [fixed in - cvs] - o status bar is not cleared on config tool exit [fixed in cvs] - o title bar miss some spaces in french locale [fixed in cvs] - - - harddrake service: 5 second timeout was too short so it was - increased up to 25 seconds [in hp release] - - - localedrake/drakx: legal problem with rpc vs hong-kong||taiwan - [fixed in hp release] - - - - o Kernel: - ======= - - - ntfs driver has a hang, additionally also causing 100% cpu usage - if either the size of the ntfs filesystem or the number of MFT - entries fell to a certain range and statfs() system call was - invoked by an application (e.g. df, gnome system monitor, etc). - see #3353 - - it got fixed quickly but unfortunately too late for us - - the probability one hits this bug is 0.2% or every 512th users. - - updated ntfs driver (2.1.2a) is at the usual place, - - http://linux-ntfs.sourceforge.net/ - - or more precisely, - - http://sourceforge.net/project/showfiles.php?group_id=13956 - diff --git a/docs/BUGS b/docs/BUGS deleted file mode 100644 index 1d154fcf1..000000000 --- a/docs/BUGS +++ /dev/null @@ -1,10 +0,0 @@ -doInstallStep: if there's not enough room, error, but packages are marked installed :( - -when you click directly on setupFilesystems and you have scsi, you're fucked. -Even if you go to setupSCSI, you won't be able to have partitions again. - -bug non reproductible: -- /etc/passwd is empty after `root passwd' stage :( -- reboot at the end of package installation with a lot of error messages from -gtk about the progressbar - diff --git a/docs/COPYING b/docs/COPYING deleted file mode 100644 index 60549be51..000000000 --- a/docs/COPYING +++ /dev/null @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) 19yy <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/docs/HACKING b/docs/HACKING deleted file mode 100644 index 5b16ed18f..000000000 --- a/docs/HACKING +++ /dev/null @@ -1,137 +0,0 @@ --=-=-- -DrakX is a very big project, and it needs special setups to work. -The purpose of this file is to explain how you can setup your box to make it -compile and run. --=-=-- - -Beware, don't try this on a production machine with important data. - - --------------------------------------------------------------------------- -Sources installation: - -First grab the gi.tar.bz2 archive and untar it in your home directory, for -example from DrakX-*.src.rpm on your Mandrakelinux distribution. - -Fix a few things: -% find gi -name "*/CVS/root/*" | xargs perl -pi -e 's/prigaux/anoncvs/' - -Then, log yourself into the cvs: -% export CVS_RSH=ssh -% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker -% cvs checkout gi - (the passwd is: 'cvs') - -And update the gi package: -% cvs update -P -d gi - - --------------------------------------------------------------------------- -Preparing the compilation process: - -(1) target directory - -Create a top level directory called /export and give write permissions to -the user/group that will be compiling DrakX. It is also suggested that you -copy a recent Mandrakelinux CD in there. (You don't have to put have all -the RPMS...) ; you'll need roughly 1.5 Gbytes for a full install. (It is -possible to not have a copy of Mandrakelinux there, if all you desire is to -compile gi) - - -(2) support directories - -You will need to create a top level /RPMS directory. This directory needs -to be populated with the following RPMS: -locales-ja locales-ko locales-zh - -GI needs to be informed about which kernel(s) is/are to be used. -Most of the time, no manual install is needed. Just be sure to -have the BOOT kernel(s) in /RPMS, and typing make later on will -extract the package(s) and build stuff from it. - -FYI, for each kernel, directories will be populated as follows: - -gi/kernel/all.kernels/2.6.0 - special files containing - - vmlinuz, modules.dep - - modules for stage1 (*.mar, *.tar) - - modules for stage2 (modules.cz) - - -(3) required rpm packages - -You need quite a number of rpm packages installed on your system -to build gi properly. Roughly: - -emacs gcc make glibc-devel glibc-static-devel perl-devel XFree86 -XFree86-FBDev XFree86-VGA16 XFree86-devel libglib-devel -libgtk+-devel ldetect ldetect-devel ldetect-lst -ldetect-lst-devel libslang-devel libnewt-devel e2fsprogs -libext2fs2-devel dosfstools rpm-devel rpmtools libbzip2_1 -libbzip2_1-devel libncurses5 libncurses5-devel setserial telnet -parted raidtools pciutils mt-st gpart reiserfsprogs jfsprogs -xfsprogs extipl pcmcia-cs gettext perl-Gtk2 perl-Glib perl-XML-Parser ash imlib -fb2png ntfsprogs lm_sensors galaxy-gnome perl-PerlIO-gzip brltty -lvm2 mkcd perl-URPM glibc-i18ndata cloop-utils partimage syslinux -memtest86+ dmraid dietlibc-devel - -You may need a few others I forgot to mention. If the compilation fails, try -to understand the message and install any necessary remaining package. - - -(4) - -NEVER build or run Drakx as root. Install sudo and setup the following -permissions in /etc/sudoers: - -user ALL=(root) -NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip,NOPASSWD:/bin/mknod - - -(5) - -pray - -[gc@obiwan ~/cvs/gi] make - - ---------------------------------------------------------------------------- -The comments written with #- are automatically stripped out at install. - - ---------------------------------------------------------------------------- -testing all: - - go to the perl-install directory and execute ./install2 --testing - - NEVER execute DrakX as root! You might need to allow all users - to read the block devices of your hard-disks, though (chmod a+w - /dev/hda* for example). - - - -Here is how I (dams) made it work on my computer. -------------------------------------------------- - -- get the sources -- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines -- cd path/to/gi -- make -- mkdir /usr/share/gtk -- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk -- ln -s path/to/gi/perl-install/share/step-* /usr/share -- ln -s path/to/gi/perl-install/share/help.xpm /usr/share -- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts -- have a cd architecture linked on /export -- ln -s /export /tmp/rhimage -- export PERL_INSTALL_TEST=1 -- cd path/to/gi/perl-install -- gendistrib --noclean --distrib /export -- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user - - - -address all bugreports to dave@null.com - -info has been added by sunny@opencurve.org diff --git a/docs/Partition-ends-after-end-of-disk.txt b/docs/Partition-ends-after-end-of-disk.txt deleted file mode 100644 index 3da57d561..000000000 --- a/docs/Partition-ends-after-end-of-disk.txt +++ /dev/null @@ -1,66 +0,0 @@ - Cylinder/Head/Size Hell Is Not Over - - pixel@mandrakesoft.com - $Date$ - - -Nowadays, you can boot Linux without ever relying on CHS -(Cylinder/Head/Size): - -- CHS information on partition table is obsolete and not used anymore. -It was causing the 1024th cylinder limitation: - - disallowing partitions above 8GiG. Problem overcome using 28bits Linear - Block Addressing (LBA) in partition table. - - disallowing to boot on partition above 8GiG (due to int13 limitation used - in bootloaders). Problem overcome using int13 extensions (EDD) - -Logical CHS (Cylinder/Head/Size) and physical CHS are not related anymore. -Especially the size of a hard drive is not a multiple of the number of -Cylinders. - - -The problem is that many tools still rely somewhat heavily on CHS information. -- most tools adjust partitions on cylinder boundary -- some tools compute the size of the disk based on CHS (eg: fdisk) - - -Resulting problems in various tools: - -- last partition not cylinder boundary adjusted, and overrun CHS computed size - - fdisk - > Total allocated sectors %d greater than the maximum %d - - cfdisk (need confirmation) - > FATAL ERROR: Bad primary partition %d: Partition ends after end-of-disk - or - > FATAL ERROR: Bad logical partition %d: Partition ends after end-of-disk - - Partition Magic (version?) - > Error #109: Partition ends after end of disk - - Windows <= 98se, Windows Me - (doesn't like it, what error message?) - - Tools handling it correctly: - - parted and so diskdruid in RedHat >= 7.2 (or is it 7.x?) - - diskdrake >= Mandrake 8.2 - - Windows XP (need confirmation) - - Tools using the full size of the disk, and so causing pbs with fdisk/cfdisk/...: - - diskdrake == Mandrake 8.2 - -- disagreement between CHS and linear address - - parted - > "Warning: Unable to align partition properly. This probably means that - > another partitioning tool generated an - > incorrect partition table, because it didn't have the correct BIOS - > geometry. It is safe to ignore,but - > ignoring may cause (fixable) problems with some boot loaders. - > Ignore Cancel ? C - - lilo - > Warning: Kernel & BIOS return differing head/sector geometries for device 0x80 - > Kernel: 38792 cylinders, 16 heads, 63 sectors - > BIOS: 1023 cylinders, 255 heads, 63 sectors - > Device 0x2100: Inconsistent partition table, 2nd entry - > CHS address in PT: 48:0:1 --> LBA (771120) - > LBA address in PT: 48384 --> CHS (3:3:1) - > The partition table is *NOT* being adjusted. - - diff --git a/docs/README b/docs/README deleted file mode 100644 index 7f7c6b552..000000000 --- a/docs/README +++ /dev/null @@ -1,300 +0,0 @@ -Well here is a little description of what DrakX needs to work in comparison -to the RH newt install. - -******************************************************************************** -* CVS ************************************************************************** -******************************************************************************** -Like all good free software, DrakX is in CVS :) - -You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi - -or via - -export CVS_RSH=ssh -export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker -cvs checkout gi - (enter password 'cvs') - - -This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com) - -Alas, all is not in CVS, a lot of things come from rpm packages which you must -install. - -Please note that redoing *all* the stuff is not for the faint of heart. I myself -sometimes wonder what the whole make does :-% -Instead, changing some .pm files is quite easy (nice interpreted language) - -******************************************************************************** -* Making your custom install *************************************************** -******************************************************************************** -If you have your own rpms you want to add, or make your own updated cdrom, you -just have to issue: - -% gendistrib --noclean --distrib <DIRS> - -Where <DIRS> is the root of all the media that the install will see, this first -one is the main one : - -(1) network or 1-cdrom installs - DIRS == the root directory of the Distribution - -(2) multi-cdrom install - DIRS == the root directories of all the media that the install will see - -``gendistrib'' will scan the file media/media_info/hdlists in the main root -directory (the first one in DIRS) to search for all media used. Typically you -use media/main for RPM packages repository. -For multi-cd, please use media/main or media/foo, etc. -For one CD or a network/hd volume, please use media/main. - -Optionnally, you can modify ``media/media_info/rpmsrate''; this file manages -the relative importance of the files, and thus their installation or not. - -To modify the code of stage2, use "misc/mdkinst_stage2_tool install/stage2" to generate "install/stage2/live". -When you are done use "misc/mdkinst_stage2_tool install/stage2" again, the "rm -rf install/stage/live". -See below for information about these files. - -******************************************************************************** -* FILES ************************************************************************ -******************************************************************************** -First here are the different things needed : - -media/media_info/hdlists - description of the available install media. - format is one line for one medium as - <hdlist_name> <rpms_directory> <description> - <hdlist_name> should be match regexp /hdlist\S*.cz2?/ - for example (two cd install) you get - hdlist1.cz Mandrake/RPMS1 Boot CD - hdlist2.cz Mandrake/RPMS2 Extension CD - -media/media_info/hdlist*.cz - table of rpm's headers, referred by ``hdlists'' - their contents can be listed using ``packdrake -l <hdlist_file>'' or - or ``parsehdlist <hdlist_file>''. - ! Need to be remade when media/main changes (with ``gendistrib'') ! - -media/media_info/depslist.ordered - for each packages, tell which package it depends on. Also contains the - size for some (obscure) bloody reasons. - ! Need to be remade when media/main changes ! - (with ``gendistrib --noclean --distrib .'') - -media/media_info/compssUsers - -media/media_info/rpmsrate - ranks and classify packages, so that the installer will know which - ones to install. format is : - <intern_group> - <level> <packages> - where <intern_group> is a symbolic name used in media/media_info/compssUsers* files, - and <level> defines importance level as described below : - 5 must have - 4 important - 3 very nice - 2 nice - 1 maybe - by default (for non expert), group selects packages for level 4 (important) - and 5 (must have). export mode add 3 (very nice) level. other level (below 2) - can only be selected using individual package selection. - -install/stage2/live - live system used on certain installs. See ``Ramdisk or not'' below for - more. - -install/stage2/mdkinst.clp - for the compressed loopback of install. - generated from install/stage2/live tree using misc/mdkinst_stage2_tool - -install/stage2/rescue.clp - rescue ramdisk. create_compressed_fs iso file - this is the ramdisk loaded when typing rescue on boot prompt. - -install/images/*.img - floppy boot images to use with DrakX. Use: - - cdrom.img for cdrom install - - network.img + network_drivers.img for ftp/nfs install (non-pcmcia devices) - - hd_grub.img for hard-disk install (see http://qa.mandrakesoft.com/hd_grub.cgi) - - pcmcia.img for pcmcia install (see ``PCMCIA install'' below for more) - -install/images/boot.iso - iso image to burn enabling any install (cdrom/hd/nfs/ftp) - - Boot from cdrom: - - boot.iso : iso image to burn - - Boot from hd (esp. usb key): - - all.img : fat16 image to dd on a partition (hint: sda1) - - it seems some bioses don't use the code on MBR (sda), - or at least skip it when it's blanked - (eg: "dd if=/dev/zero of=/dev/sda bs=1 count=446") - - some bioses need it. I had some luck using - dd if=/usr/lib/extipl/aldebaran.bin of=/dev/sda - (install package extipl first) - - Boot from network: - - all.rdz + vmlinuz via pxe - - Boot from floppy: - - cdrom.img : to install from a cdrom (but not a usb drive) - - network.img + network_drivers.img : to install from network - - hd_grub.img : to install from hd - - dd for windows: http://uranus.it.swin.edu.au/~jn/linux/rawwrite/dd.htm - -******************************************************************************** -* logs ************************************************************************* -******************************************************************************** -During install, a lot of interesting stuff can be found in different places: -in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2 -from the X install. -- alt-F1: the stdout of the install. Not very interesting stuff -- alt-F2: simple shell. Quite a lot of commands are available but as they are -written in perl (for space), they do not handle the very same options as normal. -After install, you can do ``chroot /mnt'' to see your system just like after -rebooting. ``rpm -qa'' works for example. -- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are -not interesting. -- alt-F4: kernel's place. aka the output of dmesg. -- alt-F7: the graphical install lives there - -- command "bug" puts on floppy lots of interesting stuff. -- /tmp/stage1.log: same as alt-F3 part when stage1 run (e.g. actions - before graphical install really begins) -- /tmp/ddebug.log: (nearly the) same as latter alt-F3 part -- /tmp/syslog: same as alt-F4 -- /mnt/root/drakx/ddebug.log: at the end of each step, DrakX tries to backup - /tmp/ddebug.log to /mnt/root/drakx. Available only after mounting of /. -- /mnt/root/drakx/install.log: the log of the installation (or upgrade) of the rpms -(just like rpm's /mnt/tmp/(install|upgrade).log) -- /mnt/root/drakx/auto_inst.cfg.pl: a kickstart file generated at the end of each -step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully -you know about kickstart. ``defcfg'' is a way to customize the default values in -install. For example, French can be the default language with a qwerty keyboard, -the auto-partitionning partitions can be changed, the default user class can be -set to developer (!)... - -******************************************************************************** -* po translation files ********************************************************* -******************************************************************************** -DrakX uses .po files for its translation. A script takes the different -strings out of the .pm files. It generates the DrakX.pot file which contains -all the english strings to translate. - -******************************************************************************** -* PCMCIA install *************************************************************** -******************************************************************************** -If the media you use to install is a pcmcia device, use the pcmcia boot disk. - -******************************************************************************** -* modules ********************************************************************** -******************************************************************************** -Modules can be found in at least 2 places: -- in /modules/modules.mar -- in /lib/modules.cz<KERNEL_VERSION_RELEASE> - -/modules/modules.mar is used in mdk-stage1. It contains only modules -interesting for one kind of install. For example in an hd install, it -contains scsi modules. For a network install, it contains network card -modules. (To create, extract or view files in a ``mar'' archive, please -use gi/mdk-stage1/mar/mar; this is basically an archive format meant to -be minimalistic) - -/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used -in stage2. - - -To manually install a module during install, switch to console #2 -and type "modprobe <modulename>". The modprobe program is a perl -wrapper around /usr/bin/insmod. It uses the dependencies found in -/modules/modules.dep (stage1). - -/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the -module out of /lib/modules.cz in /tmp. Then it calls insmod_. - -/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need -to give it the complete path. - -******************************************************************************** -* Making screenshots *********************************************************** -******************************************************************************** -1. easy solution: press "F2"! - -2. On a test machine, make a network install, switch to console (ctrl-alt-F2), enter: -% xhost+ -then, on another computer: -% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png - -******************************************************************************** -* Auto install ***************************************************************** -******************************************************************************** -A powerful auto-install system is available. It allows performing -an install without any human interaction. - -To feed automatic parameters to the stage1 part (the textmode -part - might not be necessary for you if you plan to do -cdrom-based auto-installs, but mostly highly needed when doing -network installs), please refer to ../mdk-stage1/doc/TECH-INFOS. - -About the stage2 part (the actual installer, at the time you're -(usually) running in graphical mode), please refer to the nice -documentation written by David Eastcott. Either install the -package "drakx-autoinstall-doc" from contrib, or browse: - -http://members.shaw.ca/mandrake/drakx/9.0/HTML/ - -The previous document will explain you how to setup the contents -of the auto_inst.cfg file. Note that you have 3 alternatives for -providing this file: -- from a floppy disk; use "kickstart=floppy" as kernel parameter, - as explained in the document -- from the installation volume itself; put the file in the - "install" directory of the installation volume; use - "kickstart" only, or "kickstart=filename" to specify another - filename than auto_inst.cfg -- specified by the network; setup your DHCP server to provide the - "bootfile" parameter, this file will be used as the - "auto_inst.cfg" file; in this case you also need to provide the - "netauto" boot parameter - -In any case, if the specified file ends with -IP or -IP.pl, IP -will be substituted by the IP address of the machine, when doing -a network install. Might be useful so that you can control all -your auto installs from your server. - -******************************************************************************** -* Miscellaneous **************************************************************** -******************************************************************************** -> o Media access methods: nfs, ftp, http, hd, cdrom -> o Stages: init, stage1, stage2 -> - What exactly each stage does - -init loads stage1 -stage1 loads stage2, from various medium type - -stage2 is too big to fit on a floppy, that's why stage1 exists - -> - How each stage relates to the various media access methods - -stage1 knows only how to access to the media is compiled for. It -contains only the kernel modules needed for that media. For eg, -the nfs/ftp/http stage1 (network.img floppy) doesn't contain scsi -modules nor ide. - -> - How one stage terminates and another begins. i.e., How does -> stage1 find, mount, and launch stage2? - - /sbin/init just starts /sbin/stage1, and monitors its -execution; it's here to cleanly umount the partitions when stage1 -or stage2 dies/finished - - /sbin/stage1 takes care of mounting stage2 (in ramdisk if -necessary) then it execs /usr/bin/runinstall2 (thus, stage2 -replaces stage1, and init then monitors stage2) - -> o Text and Graphic mode installers -> - Architectural overview of each - -have a look at gi/docs/object_class.fig - diff --git a/docs/README.devel b/docs/README.devel deleted file mode 100644 index 989946de9..000000000 --- a/docs/README.devel +++ /dev/null @@ -1,252 +0,0 @@ -Well here is a little description of how DrakX can be modified or extended. -Please refer to README file for getting DrakX code source and to known more -exactly how it works and what it can do. - - -******************************************************************************** -* Execution of DrakX *********************************************************** -******************************************************************************** -DrakX has originally be written by pixel in perl and C. -entry point for stage2 is /usr/bin/runinstall2 which is typically a link to -/usr/bin/install2 which simply load module install2.pm and execute -install2::main with @ARGV. - -install2::main parse command line arguments, prepare installation, find the right -install_interactive class (take a look at gi/docs/object_class.fig) according to -command line, memory available and if the interactive chosen is initializing -correctly, else it will try a less-demanding interactive object. -Once done, $::o is set to this install & interactive object and main runs the -various step of install2 defined in $o->{steps}, starting with $o->{steps}{first} -and iterating with method install_any::getNextStep(). -while running step, it trap any errors that may arise and use perl exception to -change step. - -******************************************************************************** -* DrakX modules descriptions *************************************************** -******************************************************************************** -Here is a brief description of what each modules of DrakX is doing. - -install2: main module of DrakX as described above, main loop execution of DrakX. - -install_steps: generic installation module containing steps definition, all steps - should always be defined here as some methods may be used on automatic mode. - there is no interactivity available. typically are defined base operation for - configuring each step according to $o. - -install_steps_interactive: generic installation module with generic interative - methods. typically are found all interactive code of DrakX for each steps. - -install_steps_auto_install: implementation installation module without interactive - methods to match auto_install mode. this is the simplest as almost no method are - redefined (inherit module install_steps only, compared to other implementation - modules described below). - -install_steps_stdio: implementation installation module with interactive stdio - methods to match stdio mode. inherit modules install_steps_interactive and - interactive_stdio. - -install_steps_newt: implementation installation module with interactive newt - methods to match newt mode. inherit modules install_steps_interactive and - interactive_newt. - -install_steps_gtk: implementation installation module with interactive gtk - methods to match gtk mode. inherit modules install_steps_interactive and - interactive_gtk. - -install_any: contains various methods using generic interactive interface but - not used by standalone tools. - -install_gtk: contains various methods using gtk interface but not used by - standalone tools. - -interactive_stdio: implementation methods for interactivity in stdio mode. - inherit module interactive. - -interactive_newt: implementation methods for interactivity in newt mode. - inherit module interactive. - -interactive_gtk: implementation methods for interactivity in gtk mode. - inherit module interactive. - -my_gtk: basic gtk access methods. - -any: contains various methods using generic interactive interface. to compare - against install_any module as this one is available for standalone tools. - -class_discard: simple module that implement every methods undefined to return - nothing. this trick is used to ensure no undefined method can arise when using - code that reference interactive method which are not defined. - -common: contains very simple and very usefull (common) methods to do various task. - some methods inspired by functionnal language. - -c: contains wrapper to C definition of methods used by DrakX, use of C is necessary - for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree - interface. - -commands: implement some un*x commands, conflicting name with perl contains - trailing underscore (_). this module is used by commands perl script that - determine which command to run according to $0 (this is used this way when DrakX - is running). - -run_program: allow running a program with redirection but without using a shell. - allow rooted execution. - -help: contains all help message displayed by DrakX. - -log: log facility methods. - -lang: language manipulation methods, get and set sysconfig file, load po. - -keyboard: keyboard manipulation methods, get and set sysconfig file, set console - keyboard mapping. - -mouse: mouse manipulation methods, get and set sysconfig file, change mouse. - -timezone: time zone manipulation methods, get and set timezone. - -services: services manipulation methods, activate or delete services (see - /etc/rc.d/init.d directories). - -detect_devices: manage detection of various class of hardware. - -devices: manage device file, create device special according device name. - -partition_table: base partition table management methods, it manages - appriopriate partition_table_XXX object according to what has been read - as XXX partition table type. - -partition_table::bsd: matches a BSD partition table. - -partition_table::dos: matches a DOS partition table. - -partition_table::emtpy: matches an empty partition table. - -partition_table::mac: matches an Apple partition table. - -partition_table::raw: generic class for the following partition_table::XXX. - -partition_table::sun: matches a Sun Label partition table. - -fs: read and write /etc/fstab file, mount and umount, format. - -fsedit: manage (modyfy, edit) mount point associated to partition (like editing - /etc/fstab). - -swap: swap management methods, format and mount (activation). - -raid: raid (software only) management methods. - -lvm: lvm (Logical Volume Manager) management methods. - -loopback: loopback management methods, used for lnx4win type installation or using - a file as a partition. - -diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools. - -ftp: ftp mangement methods, used when using ftp install. - -http: http management methods, used when using http install. - -modparm: kernel modules options management, allow building nice dialog with each - module parameter available. - -modules: kernel modules management, allow loading or unloading (ala modprobe or - insmod). - -printer: printer management methods, read and write both LPR or CUPS configuration. - -printerdrake: interactive printer management methods. - -network: network management methods, get and set sysconfig file. - -netconnect: network configuration wizard. - -netconnect_const: network configuration wirard data. - -Xconfig: X configuration (monitor + already existing config file) management. - -Xconfigurator: X configuration wizard. - -Xconfigurator_const: X configuration wizard data. - -booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods. - -pkgs: rpm package and hdlist, depslist management methods, allow selecting or - unselecting packages, manage rpmsrate file and select group, installation and - removal methods of rpm file. - -crypto: *obsoleted* module to manage crypto site and rpm file. - -standalone: standalone only, allow defining a standalone tools. - -bootlook: standalone only, interface with DrakConf to configure bootloader options. - -drakfirewall: standalone only, interface with DrakConf to configure a tiny firewall. - -******************************************************************************** -* DrakX FAT resizer module description ***************************************** -******************************************************************************** -here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize -FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the -limit of the partition itself, if no cluster need to be moved, only boot sector -partition limit are modified. - -any: various methods to flag cluster, compute min size. - -boot_sector: boot sector management methods. - -c_rewritten: originally resize_fat was only perl, this contains code section that - are the most sensible to speed or memory contraints and have been rewritten to C - using perl extension. - -dir_entry: manage directory structure. - -directory: traverse directory recursively, needed to move correctly cluster. - -fat: manage fat structure. - -info_sector: manage info sector. - -io: manage I/O on disk (need to take care of big file as partition size may be - larger than 2GB). - -main: main resizer algortihm. if needed allocate new clusters, copy files, copy - directories. update boot sector info. - -******************************************************************************** -* Adding a new step to DrakX *************************************************** -******************************************************************************** -Say we want to add a question for setting "alawindows" option. -We put it pretty early in the install, let's say after "Select Installation -Class". - -1. in install2.pm - -add - - selectAlawindows => [ __("A la windows or not"), 0, 1, '' ], - -after - - selectInstallClass => [ __("Select installation class"), 1, 1, '' ], - -the 0, 1, '' means not "redoable", "skip on error", "don't hide" - -2. add your function selectAlawindows in install2.pm - -sub selectAlawindows { $o->selectAlawindows } - -3. add your function selectAlawindows in install_steps_interactive.pm - -sub selectAlawindows { - my ($o) = @_; - $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1); -} - -4. add your function selectAlawindows in install_steps.pm (not needed in that -case, except for auto_install) - -sub selectAlawindows {} - - diff --git a/docs/README.pxe b/docs/README.pxe deleted file mode 100644 index 2ddd205fe..000000000 --- a/docs/README.pxe +++ /dev/null @@ -1,133 +0,0 @@ -Here is a short description to configure a PXE server using dhcpd and tftpd. -This allows a network boot for your ethernet card conforming to the Interl -PXE specification. - -******************************************************************************** -********** General overview ************ -******************************************************************************** - -You need a dhcp server and a tftp server on one or two machines to allow the -network boot. We are not using a PXE server to achieve this as it is not -mandatory. -You can install tftp-server and dhcp-server package from the Mandrake -distribution for example. - -On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample -file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is -assumed to be your domain name, and 192.168.1.1 a name server. All install are -done on subnet 192.168.2.0. - -All the files that will be downloaded by the tftp daemon are located under -"/tftpboot" : - "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine - where a network boot will be done, this program comes - from the SYSLINUX package by H. Peter Anvin. (look at - http://syslinux.zytor.com/pxe.php for more information) - "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for - pxelinux.0 will be found, pxelinux.0 will download - these file by itself. It searches first for a file - named accordind to the machine IP address in - hexadecimal, for example for 192.168.2.20, it - looks for "C0A80214" first, then "C0A8021" and so - on down to "C0", "C" and "default". - "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation. - "/tftpboot/vmlinuz" is the boot kernel for installation. - "/tftpboot/help.msg" is the message displayed by pxelinux.0, note that currently - graphical message (as for install using SYSLINUX 1.48 with - graphic patch by Mandrake) is not supported. - -All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img", -or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation -of the file found on the "network.img" called "syslinux.cfg" but without the reference -to boot.msg (as it is not currently supported). - -Update network configuration for your needs and start dhcp server on the machine and -tftp server and this should work. - -******************************************************************************** -* /etc/dhcpd.conf ************************************************************** -******************************************************************************** -ddns-update-style ad-hoc; - -authoritative; - -option space PXE; -option PXE.mtftp-ip code 1 = ip-address; -option PXE.mtftp-cport code 2 = unsigned integer 16; -option PXE.mtftp-sport code 3 = unsigned integer 16; -option PXE.mtftp-tmout code 4 = unsigned integer 8; -option PXE.mtftp-delay code 5 = unsigned integer 8; -option PXE.discovery-control code 6 = unsigned integer 8; -option PXE.discovery-mcast-addr code 7 = ip-address; - -default-lease-time 28800; -max-lease-time 86400; - -option domain-name "mydomain.com"; -option domain-name-servers 192.168.1.1; - -class "PXE" { - match if substring(option vendor-class-identifier, 0, 9) = "PXEClient"; - option vendor-class-identifier "PXEClient"; - - vendor-option-space PXE; - option PXE.mtftp-ip 0.0.0.0; - next-server 192.168.2.1; #tftp server location - - filename "pxelinux.0"; # standard TFTP - -} - -shared-network "mynetwork" { - subnet 192.168.2.0 netmask 255.255.255.0 { - option subnet-mask 255.255.255.0; - option routers 192.168.2.1; - - ddns-domainname = "mydomain.com"; - - pool { - range 192.168.2.10 192.168.2.20; - allow members of "PXE"; - } - } -} -******************************************************************************** -* /tftpboot/pxelinux.cfg/default *********************************************** -******************************************************************************** -default linux -prompt 1 -timeout 72 -display help.msg -label linux - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=788 -label vgalo - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=785 -label vgahi - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=791 -label vga16 - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga16 -label text - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 text -label patch - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 patch vga=788 -label expert - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 expert vga=788 -label rescue - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 rescue rw -label oem - kernel vmlinuz - append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw -******************************************************************************** -* Usefull linkst *************************************************************** -******************************************************************************** - -http://syslinux.zytor.com/pxe.php -http://www.kano.org.uk/projects/pxe/ diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS deleted file mode 100644 index 93a7133db..000000000 --- a/docs/SHORTCUTS +++ /dev/null @@ -1,51 +0,0 @@ -******************************************************************************** -main shortcuts - -F1 -> help -F2 -> take a screenshot -F11 -> previous step -F12 -> next (reachable) step - -******************************************************************************** -diskdrake - -taken directly from diskdrake.pm: - - "a" => \&Active, - "b" => \&Move, - "c" => \&Create, - "d" => \&Delete, - "f" => \&Format, - "m" => \&Mount_point, - "M" => \&Mount, - "n" => \&Create, - "o" => \&ReadFromFile, - "s" => \&SaveInFile, - "q" => \&Exit, - "r" => \&Resize, - "t" => \&Type, - "u" => \&Unmount, - "w" => \&WritePartitions, - "W" => \&WriteFstab, - -hopefully it is explicit enough :) - -******************************************************************************** -list choice - -- acceleration a la windows (default): enter a letter and the selection will move to the -first entry beginning with that letter. If you enter another letter it will try -to find the entry beginning with the 2 letters you have given. In case it fails -the starting_word is reset. -- incremental search a la emacs: searches trough the list - -Use control-s to use incremental search and then to search next occurence - -******************************************************************************** -in case of complete mouse sh**t - -XFree86 provides a way of moving the mouse pointer: -- first, press Ctrl-Shift-NumLock -- then move the pointer with the keypad arrows -- press button is ``0'' (aka Inser) -- release button is ``.'' (aka Suppr) diff --git a/docs/TODO b/docs/TODO deleted file mode 100644 index cb9399f82..000000000 --- a/docs/TODO +++ /dev/null @@ -1,515 +0,0 @@ --URGENT--------------------------------------------------------------------------------- -check for fpons/pixel BOTH that resize_fat is clean for current version -relative to 7.0-2. - -heavy testing of diskdrake to avoid corrupting partition table, current version -should be available to fix bogus partition table, writing enabled only when -partition is Ok (fixme? allow primary partition inside extended one, but with -warning on diskdrake startup, made them as warning ?). - --features------------------------------------------------------------------------------- -add rpmdrake in menu - -(7.1 or later) clean SCSI CDROM autoboot. -(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use - -(7.1)better help for partitioning in newbie - -(7.1)Improved network configuration (PPP and/or Ethernet) -PPPoE install and configuration (SuSE includes it, DHCP-like) -(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard) - ----- -(7.2) replace normal with standard (in the installClass's) - -(7.2 or later)horizontal sub-steps - -(7.2 or later)diskdrake in text mode - -ask "do you have SCSI?" before asking "probe PCI or not" - -(?) paride in stage1 -(done,gc,8.0) stage1 & network: add ability to choose the network interface to use - -(?) msec custom - -(?)firewall configuration (instant firewalling?) - -(?)widget for displaying fdisk (dindinx) -add fdisk using the zvt widget (taken in gnome-libs) - -(?)help in some configuration files. - -ability to add nfs/weird_fs entries in fstab - -size of packages in crypto - --to test-------------------------------------------------------------------------------- -what's lseek64? - -ensure installClass is set to something in auto install. - -for axp, swriteboot -f1 if swriteboot failed. -axp with swap part sigsegv - -tree for choosing monitors (buggy?) - -what happens if a module fails to insmod (scsi step), in beginner/normal/expert - -fstab must be sorted (/usr/local after /usr) - -RAID upgrades - -add choice clean /tmp or not in expert - -kernel chosen by default must be the one according to supermount/secure - -bug if ide-scsi, no more hdX, but scd0 (aka sr0) - (and add alias block-major-11 ide-scsi ?) - -check on update for conf.modules and modules.conf ! - -with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems - --easy fixes----------------------------------------------------------------------------- -rpmdrake proposition for cdrom labels - -use option nocheck to mount for upgrades - --fixes needing thinking----------------------------------------------------------------- -bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack - -ask network configuration only if NIC found? - -configure DHCP for newbies if ethernet & DHCP card available - -xvidtune like screen configuration (see SuSE's yast) - -live cdrom for alpha (sparc?) - -network boot - -get the error when getting/reading .rpm files fail -better timeout handling for network installs - -handle not enough room for update -(fpons)verify the free space is big enough. - -the XFdrake test does not handle the fontset - -> Here I go into the printer configuration select 'HP Deskjet 722C Colour', -> print a test ASCII page, pressing 'No' when prompted to indicate the page did -> not print OK and then hitting cancel when prompted to choose a printer type -> again. -> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504. - -diskdrake: take from parted mklabel, hide(?) - -bug in kde desktop if keeps home but not an upgrade - -bug in users: mandrake user is added twice in strange installs -(mixed of security 0 + ???) - -bugs rpmdrake: -- just after installing a package, switch to `Installed', the package has wrong name -- refresh the kde desktop after package installation in rpmdrake -(restart kpanel) -- rpmdrake and same name packages - -urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3 - -bug in defcfg in with lang=fr_FR, display is buggy - -bug keyboard focus: after switch in console at Xconfig step - - - --to look at-------------------------------------------------------------------------- -adduserdrake to remove/update users - -(???)free provider auto configuration facility (to be discussed). -auto ppp-configure with free provider - -(?)on laptop, configure the MMU to use swap not very often - -(?)checkboxes in groups based on compssList (and availableSpace?) - -(?)see what can be done with nvram (50 bytes to save information) - -better wacom support - -(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters - (work with magicfilters (debian)) - (should be handled by ghostscript BJC600's driver) - -(pix)install text on mem=8M, mem=16M? - -(pix)kickstart -partitioning? raid? -X configuration and bootloader in kickstart - -XFdrake chooseResolutions with ask_from_list do not permit ``Show all'' - -(?) options in mkfs, progress bar when formatting - -(?) when some error occurs, partition must be unset isFormatted - --hardware------------------------------------------------------------------------------- -- with no floppy drive, mkbootdisk step fails badly -- with bad floppy or write protected, mkbootdisk doesn't say anything -- try detect_devices::floppies (and how are scsi floppies handled?) -maybe: do a iotcl FDGETPRM to detect fd1, fd0. - -need a simple solution to precise mouse type (syslinux option?) - -ELSA Gloria has bad ddc info - -token ring is tr0 not eth0 - -I have Mandrake 6.1 installed and working on a ThinkPad 770. -To enable the PCMCIA Token ring I have to append the following line to -/etc/pcmcia/config.opts -module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000" - -smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW) - -UDMA66 (ultra66.o for promise) - -aha152x needs "insmod aha152x.o aha152x=0x140,11,7" - -(obsolete) usb module not removed if no mouse found - -(fpons)handle dat drives - -hibernation on laptop -> clock not restored - -# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled - -(?)enable the testing of the mouse type (under X) (wheel) -possibility to specify the mouse - --(?)--------------------------------------------------------------------------------- -(?) handle NT (add entry for it in lilo, put it in fstab) - -(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs -disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81 - -(?)using setxkb, enable the testing of the keyboard - -(?)XFdrake does not handle fbdev - -(?) Je viens de faire une installation sur une machine où seul Be était -installé. Je l'ai supprimé et installé (mode recommandé) Oxygen. Au -redémarrage, le boot manager de Be apparaît et il est impossible de -démarrer Linux. -Pourquoi ne pas installer LILO si on supprime toutes les partitions ? - -(?)initrd in bzip2 - -(?)smaller zsh (or ash in initrd) - -(?)is configureNetworkNet needed with dhcp/bootp? - -(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/ - -(?)mandrake_desk was not installed while kdebase it there on upgrade - -(?)when clicking on X configuration, installation of packages is not displayed - -(?)maybe remove commented lines in /usr/lib/perl5/... files - -(?)timezone using a picture (pb: how to delimit zones) -when asking GMT or not, display the time for each possibility -the list is too big for USA - -(?)ability to select the type of install when booting of cdrom -(?)use the ability of el torito to handle 2.88MB or more - -(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners - -(?)loadFont sucks - -(obsolete)trash on the screen when X first starts - -(?)remove the gray line surrounding the logo - -(?)cleanup /etc/services & /etc/protocols - -(?)strange: no scsi of type 'fd', only 'tape' - -(?)remount ro before X test. - -(?)remove every << and >> (doesn't handle > 32bits) - - --done--------------------------------------------------------------------------------- -(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool. - -(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically -after clear all and auto allocate, try maximal size available). - -(done,fpons)rewrite mouseconfig in perl? - -(done,pix)kudzu or not in miscellaneous - -(done,pix)warn the user if not enough ram to fulfill install - -(done,fpons)test after printer config - -(done,pix)ask for more than the memory size detected - -(done,fpons)modem config - -(done,pix)call kudzu in batch to initialize its list - -(done,pix)standalone generator of mdkinst_stage2.gz - -(done,pix)text install - -(done,pix) if u choose mouse usb != found mouse, it fails at X config - -(done,pix) diskdrake bug: saved information on floppy contains isMounted. - -(done,pix) update devices.c from modules.pm - -(done,pix) in lilo.conf, put -disk=/dev/hdb - bios=0x80 - -(done,pix) diskdrake -auto_partitions -suggested partition tables must be better foreach installClass - -(done,pix) update the list of modules (in update_kernel) - -(done,pix) language support: only choose the right locales and upmark the packages requiring it - -(done,pix) move security question before isntallation of packages - -(done,pix) install ssh - -(done,fpons,pix) change the boot message of syslinux (have something different from RedHat) - -(done,pix) install_steps.pm: 569 (128M + 3) - -(done,pix) bug: mouse freeze just before network configuration (mouse primax) - (was kudzu) - -(done,pix) signal 11 in stage1 nfs kickstart mount failed - -(done,pix) ask supermount or not, no supermount with kernel-secure - -(done,pix) fix bug in g_auto_install (can't go through all) - -(done,pix) bug: install from ciril.fr fails - -(done,pix)wizard for partitioning in case of one full vfat - -(done,dindinx)app for choosing drakxtools (drakxconf) -(done,pix)verify being root -(done,pix)log::l -> initlog - -(done,pix)install apmd for laptops (maybe not start apmd though) -(done,pix)icewm apm (sh icewm_apm) -(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart) - -(done,pix)bug in adduserdrake: missing pwconv in md5 -(done,pix)correct the default value of draksec (cp draksec) -(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert - -(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window - -(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config - -(done,pix) hwiz and supermount and eject :( - -(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install) - -(done,pix)perl and .ph's - -(done,pix) BUG bootp in network install sigsegv - -(done,pix) move the last done stuff before Xconfiguration if possible - -(done,pix)draksec is buggy, don't try security >= 4 - -(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix)) - -(done,pix)missing alias ll for root - -(done,pix)urpmi.addmedia: |gzip instead of doing it afterwards - -(done,pix)locale (and fonts?) buggy in case ramdisk is used - -(done,pix)rpmdrake: Installed packages not in hdlist should be there - -(done)in ftp install, locale not installed properly - -(done,pix)pcmcia.img does not handle hd/cdrom - -(done,pix)cyrillic font buggy in DrakX - -(done,fred)remove xfs user from kdm - -(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive) - -(done,pix(works))test ramdisk stage2 and romanian - -(done,pix)kfmrc - -(done,pix)on laptop, default to 1024x768 - -(done,pix)mkinitrd and deps - -(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them - -(done,pix)crypto message - -(done,pix)test bug with lilo and windows (if not on mbr) - -(done,pix)removed icons come back later (kde desktop) - -(done,pix(was bug in upgrade reading old config)) - segfault in linuxconf (adapter 1 empty) - (test with the sysconfig sent) - -(done,fpons)bug: Lrosqu'on effectue une mise à jour et que /etc/lilo.conf -contient la variable Ğ default ğ positionnée sur autre chose que -Ğ linux ğ ou Ğ windows ğ, DrakX est incapable de générer LILO. - -(done,fpons)bug: GeForce and hd.img? - -(done,fpons)for upgrade in expert, give choice of packages to install - choosing packages available in upgrade? - -(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too) - -(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd) - Do not update inode access times on this - file system (e.g, for faster access on the - news spool to speed up news servers). - -(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons - -(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "") -(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE) -(done,pix)group cdrom in /etc/group (gid=22) -(done,pix)drakxtools should require urpmi -(done,pix)bug: gdm unset LANG -(done,pix) zip with automount -> ppa not autoloaded -(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc -(done,pix)lilo in russian/japaneese is horrible -(ok,pix)test ide burners -(ok)test check bad blocks optional for mke2fs -(done,pix)hd install: no umount is done at the end of install :( - -just before release: -(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as -(done,pix)- crypto dependencies to update -(done,pix)- update kudzu's pcitable -(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's) - ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64) - -(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp - -(done,pix) replace - { device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 }, -by - { device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 }, - -(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html) - -(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG) - -(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le système, un -message d'erreur apparaît pour signaler le problème (bien) mais on ne -peut en sortir. La seule solution est de redémarrer. - -(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect) - -(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline - -(done,pix)urpmi: handle many args on cmd-line - -(done,pix)fix any // in path to ftp server otherwise windobe server bug :( - -(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected, -try to figure why? - -(done,pix)in chooseResolutions: display the graphic card found - -(done,pix)with pcmcia, need ONBOOT=no - -(fpons,done) XFree: handle by card options -eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp - -(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs. - -(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server - -(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly) - -(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists) - -(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ... - -(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?) - -(done,pix,7.1)partitioning, keyboard shortcut. - -(done,fpons,7.1)index/compress hdlist? (for multi-cd) -! for multi-cd live is mandatory, small transaction are mandatory too. - -(done,pix,7.1?)loopback partitions (even root one) - -(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx) - -(done,pix,7.1)Generally improved package selection /ergonmic issue. -Tree -> CTree, ``all'' branch with all packages -show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install) - -(done,pix)let diskdrake have dos/win partition automatically set up with mount point, -this will help loopback too. - -(done,pix,7.1)grub - -(done,pix,7.1)feature missing: cancel installation - -(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0 - -(done,pix(partly, protection against bugging))bug in diskdrake: -in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7 -in the middle, remove the first one. Result hda5 at the end and bug. - -(obsolete) have a better time estimation of the remaining time in install packages - -(done,dindinx+pix)ask_many_from_list can't keyboard scroll - -(done,pix,7.1)individual package selection: double click is tiring... - -(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard) - -(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes. - -(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if -already hda1 with /boot/vmlinuz - -(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added) - -(done,pix)chooseGroup with individual alone - -(done)(7.1) rewrite crypto stuff -(done)crypto: add a cancel & progress bar while downloading -(done)error handling (like reading hdlist) -(done)(7.1)progression bar on crypto. - -(done, daouda&pix,7.1, other persons)rescue: -- small modification for stage1 to get the rescue stage2 -- create a stage2 with many tools (fdisk, bash...) -the rescue could be on another cd (if multi-cd) -! care must be taken about modules (if ide is in module...) - -(done,7.1)install in 800x600 -- need handling of both 640x480 (mostly for VGA16) and 800x600 - -(done,NEED 7.1) auto-install for corporate, very important (need consolidation). diff --git a/docs/advocacy b/docs/advocacy deleted file mode 100644 index 9e7f00b6b..000000000 --- a/docs/advocacy +++ /dev/null @@ -1,87 +0,0 @@ -a little DrakX history: - -june 1999: - i start rewriting redhat's install in perl, partly for the fun of it. I'm - still working for the army - -5 july 1999: - i start full time job at mandrakesoft. But we don't have many computers and i - must share the accounting computer with Merieme who is working half-time. No - test machine (i test on others box, and destroyed Jacques partitions once), - guess how it slows things down? - -august 1999: - at last computers, even test one - first DrakX version which can install things, very very rough - -september 1999: - a friend of mine help me 2 weeks on DrakX relayed by Francois - -november 1999: - first released version of DrakX (goldpack). Not really stable yet. - -january 2000: - 7.0 is out, with a DrakX quite stable - -july 2000: - dams starts working on draknet - -mid-october -> mid-january 2000: - gc rewrites the stage1 to win every kb we can - -> size divided by 7 (!) for cdrom - - -The DrakX team is also doing a lot of other things: -- drakxtools -- urpmi, early MandrakeUpdate, early rpmdrake... -- Mandrake Control Center (new DrakConf) -- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo) -- fixing core packages to make them installable -- scoring packages, sorting them, flagging them... (compssList, rpmsrate) -- reading/answering cooker and other MLs -- helping non-perl gurus :) - -That doesn't give much. Me being the one more working on plain DrakX. It gives 2 -people working for 1.5 years. IMO it isn't ``spending an enormous amount of -resources''. -And what do you mean by ``compared to the code base size''??? DrakX is currently -around 28K lines, which is big IMO. You can compare it with linuxconf which is -170K lines. I think the achievement of DrakX is comparable (a 6 times code size -win from dumb C++ to expressive perl is normal imo). - - -Also it seems like we don't have the same understanding of the word -"maintenance". -DrakX functionalities have evolved *a lot* since the beginning: - -- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...) -- making things prettier - - more bitmaps - - "advanced" button - - syslinux graphical boot -- making it work with latest versions of software (eg: switching to rpm4) -- finding out the best way to use rpmlib -- multi-cd -- draknet: configuring every piece of stupid protocols -- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry -- XFdrake: multi-mice, multi-heads, 3D-accel -- porting to axp/sparc/ppc (with Stew's help) -- always more i18n -- keeping things small - - .cz format - - moving to .png - - getFile on demand from mdkinst for ramdisk installs - -[...] - -> You don't believe the books ? Count yourself; see the man/months spent -> in 'pure' developoment in drakX, and the resources put in mantainance -> of the code base; as far as i know, your count should confirm what the -> books says; more probabily, you will discover that our numbers are -> even worse. - -if you count enhancements, adding features... in maintenance, i confirm the -numbers, and find them quite normal. - -if you only count bug fixing, the time would be much shorter (around 30%). - diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive deleted file mode 100644 index 99036008e..000000000 --- a/docs/advocacy-interactive +++ /dev/null @@ -1,60 +0,0 @@ - -> > We already have some functional backends, frontends, that works great, and has -> > not been thrown away since 1 year. We use it during install, post install, mcc -> > and so. -> -> But aren't generic enough. - -DrakX handles: -- buttons -- bool values (checkboxes) -- ranges -- entries -- combo boxes (editable or not) -- lists / radio boxes -- tree lists -- iconlist -- wait messages - -Features: -- all the entries above can be mixed -- nice separation between data and displayed data (eg: choose in list of -objects representing hda/hdb/... but displayed nicely with size...) -- keyboard handled nicely in GTK frontend -- callback on events: - ok pressed => check before the dialog is hidden - focus changed => - * enables pre-setting things based on other entries - * value checking on the fly -- simple/advance toggle -- shadowing of entries -- tooltips -- size of windows computed the best possible -- perl-based - -Misfeatures: -- display not flexible (though i don't know any of the tools we're talking -about that is flexible => nice) -- quite a few features are gtk only (simple/advance toggle, shadowing of -entries, certain events, tooltips). -- a stdio front-end exist but handle only certain entries. It would need a -week-work to finish it -- a http front-end could be done (mod-perl needed) -- perl-based - -The DrakX frontend (called "interactive") could be moved out of DrakX. - -eg of use: - -<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment> -<#/part> - -[...] - -> > -provides a lot of frontends -> -> And you ideally have to provide a frontend by widget set. - -nope. The interface is completly standardised, even if it include some -gtk-like niceties. The *complete* newt (and not just entries and radioboxes -like bus) binding takes 241 lines. diff --git a/docs/comparisons b/docs/comparisons deleted file mode 100644 index f399a9e84..000000000 --- a/docs/comparisons +++ /dev/null @@ -1,288 +0,0 @@ -redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything") - -upgrade to redhat 6.2, sum 757MB, df 936MB, 20min - -mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages - -upgrade to cooker, sum 1000MB, df 1404MB, 35min - - -redhat 7.0b, install 815MB, df 960MB, 18min -redhat 7.0, install 995MB, df MB, 26min - -7.2b, 3.3GB 2h26 - - -7.2b: (lang fr) -compssLevel df rpm time fs df/time - -100 64 59 0:59 ext2 500M 1.08 - 90 132 127 1:50 ext2 500M 1.20 - 80 226 218 3:26 ext2 500M 1.10 - 70 449 387 5:52 ext2 1G 1.28 - 60 614 541 8:36 ext2 1G 1.19 - 50 1113 943 17:40 ext2 2G 1.05 - 40 1193 1013 20:39 ext2 2G 0.96 - 30 1262 1072 22:28 ext2 2G 0.94 - 20 1445 1219 27:34 ext2 2G 0.87 - 10 1649 1394 36:58 ext2 2G 0.74 - 0 1943 1638 48:02 ext2 2G 0.67 --10 2957 2519 101:49 ext2 4G 0.48 - -7.2b: (lang all) -compssLevel df rpm time fs df/time - -100 70 59 1:04 ext2 500M 1.09 - 90 289 281 4:20 ext2 500M 1.11 - 80 373 361 5:41 ext2 500M 1.09 - 70 890 794 13:28 ext2 1G 1.10 - - -mem used 7.2cooker -gtk: runinstall2 13608(data 9572) + FBDev 2984(data 1544) -newt: runinstall2 9516(data 7528) -stdio: runinstall2 9160(data 7372) - -8.0rc1: (lang fr) - -rpmsrate - -4 () 175 139 3:25 reiserfs 2G 0.85 -4 all 831 786 18:08 reiserfs 2G 0.76 - -8.1b - -5 () 77 66 1:24 ext2 300M - -8.1pre_rc1 rpm df time/rpm rpm/df - -6 () 82 66 1:26 ext2 500M 1.05 1.24 -5 () 89 71 1:38 ext2 500M 1.10 1.25 -3 () 94 77 1:46 ext2 500M 1.13 1.22 -5 X 145 127 2:09 ext2 500M 0.89 1.14 -3 X 231 217 3:26 ext2 500M 0.89 1.06 -4 kde 393 316 4:31 ext2 2G 0.69 1.24 -4 kde 393 316 4:41 ext2 2G 0.72 1.24 -4 kde 393 316 4:43 ext2 4G 0.72 1.24 -5 all 367 337 5:02 ext2 500M 0.82 1.09 -4 kde+gnome 454 370 5:50 ext2 4G 0.77 1.23 -4 kde+gnome 454 370 6:10 ext2 4G 0.81 1.23 -4 kde+gnome 454 370 6:24 ext2 4G 0.85 1.23 -5 all 489 406 5:55 ext2 4G 0.73 1.20 -5 all 490 406 5:18 ext2 1G 0.65 1.21 -4 kd+gn+dsk 594 494 7:31 ext2 4G 0.76 1.20 -4 prev+dev 827 696 10:27 ext2 4G 0.76 1.19 -4 all 1100 988 19:34 ext2 1G 1.07 1.11 -3 all 1640 1331 31:33 ext2 2G 1.15 1.23 -3 all 1740 1434 39:38 ext2 4G 1.37 1.21 -2 all 2252 1843 54:40 ext2 4G 1.46 1.22 --1 all 2490 2048 61:02 ext2 4G 1.47 1.22 - -# perl -alpe '$F[4] =~ /(.*):(.*)/; $r = ($1 * 60 + $2) / $F[2]; s|\S+(\s+\S+)\s*$|sprintf("%.2f", $r) . "$1"|e;' -# perl -ape '$r = $F[2] / $F[3]; s|\S+\s*$|sprintf "%.2f\n", $r|e;' - -9.0beta1 - -5 () 89 71 1:35 ext2 500M -3 X 240 231 3:41 ext2 500M -5 all 306 293 3:36 ext2 500M -4 all 808 731 6:48 ext2 1G -4 all 1433 1331 21:44 ext2 2G -4 X+kde 822 749 6:05 ext2 2G -4 X+gnome 369 319 5:58 ext2 2G - - -redhat 7.3: -- do not halt the box when "halt" is used -- no sysreq -- kdm has gnome entry whereas gnome is not installed - => choosing gnome gives a flashing black screen and kdm reruns - -- repartition of packages on various CDs is crap - -- bootloader: handling of multiple disks is more powerful in redhat, but more -dangerous (proposed to everyone, but not proposed especially to people having -a dangerous combinaison) -- why still asking about lba32!! - -* anaconda 7.3 vs 7.3.92 - - skipddc option (locks some machines) ?? - maybe because it's done at the beginning of their install? - - - LVM - - lvm_dialog_gui.py - - Physical Extent 1MB 2MB 4MB ... 16GB - (vgcreate -s ${PhysicalExtentSize}k) - - see lvm_sanity_checks.txt, take them - - lvm on / (mkinitrd) - - handle upgrade when lvm on / - - vgcreate -An (ie --autobackup no) ?? - (also for lvcreate vgchange lvremove - - see clampPVSize in lvm.py - - - RAID - - Number of spares ?? - - mkraid --dangerous-no-resync ?? - - - progress bar in ext2 formatting - - - ctrl-alt-suppr during install => reboots - - - user names: the regexp is [a-zA-Z][^\0-\x20:,\n]* or [A-Za-z][A-Za-z0-9]{0,7} (depending on wether you're in text mode or graphic mode :) - - check the user name created is not a system one (see systemUsers) - - - SMB authentification - - cloneDrive ? - - - edd dropped (was to detect lba32 capability, which was dumb) - - - reconfig type of installed removed (was something between install & upgrade) - - - ddcprobe code removed -> moved to kudzu - changes: sigprocmask and movl added around lrmi_vm86 - - - $ENV{GDK_USE_XFT} = 0 - -* kudzu 0.99.52 vs 0.99.55 - - blacklisting modules.pcimap e100 and bcm5700 - -* hwdata 0.14 vs 0.32 - - dropped XFree86 3.3.6 support - - - upgradelist: list of (old_module => new_module) for upgrades - (a simpler way would be to drop entries in modules.conf that concern - obsolete (and not available anymore) modules, relying on auto-detection to - add the new one) - - - CardMonitorCombos (for laptops) - -redhat 8.0: - - (legend: + pros - cons / notice) - - Install steps difference - + firewall wizard - + md5sum check when booting install - - no upgrade packages installation during install - - no services configuration (chkconfig) - - no printer configuration - - no autologin - - no real small installation - - no small packages (groff-for-man, perl-base...) - / still propose non-MD5 or non-shadow passwords - / post install tool (firstconfig) - - General install behaviour, eye-candiness - + package selection a la Windows - + in language selection languages displayed in native language - + candy timezone selection - + help uses bold/italic/big-font - - no one CD install - / not using fb at install - / python + gtk2 vs perl + gtk - / ask many things before doing anything (esp. delayed partitioning, swap not available when selecting packages!(?)) - - more width-hard-coded dialog boxes (harder for translations) - / use a loopback file from the CD then copied on system - - Partitioning - - no diskdruid after install - - no partitioning wizard - - no devfs - - no xfs (but now has reiserfs/jfs) - - no loopback crypted fs - - no file swap (?) - - no supermount - + LABELed entries in fstab - + progress bar while formatting - - Bootloader - + bootloader configuration less awkward - - no automatic handling of bios ordering with many harddrives - - propose to manually change bios ordering even with one harddrive - - LBA32 checkbox - / defaults to grub - - Network - - awkward question apropos hostname when using DHCP - - no default choice for netmask/gateway/DNS based on IP - - XFree - - no wacom configuration - - no graphic card multi-head configuration - - no ATI tvout configuration - - no prompt for logout after changing X config - - VideoRam prompted for everybody - / no XFree3 - / no Utah GLX - / load module "fbdevhw" "record", but not "v4l" - / always load module "glx" and "dri" - - Keyboard - - many non useful keyboard entries (eg: latin0) - - no way to choose the toggle key to choose between latin/non-latin keyboard - - no loadkeys done during install for console - - Mouse - - no way to test mouse choice - - mouse choices include many non-useful choices, badly sorted - (Intellimouse must be sought in Microsoft whereas it's used by many others) - - Multimedia - - no bttv configuration (including webcams) - - missing audio modules (alsa, audigy...) - -* anaconda 8.0 (rel. 4) vs 8.0.92 - - use vte instead of gnome.zvt - - add alpha (axp) partitioning code - - remove label "nofb" and options "devfs=nomount ramdisk_size=9216" from syslinux.cfg - - edd (ddc probe) moved to kudzu - - add "-Odir_index" option to ext3 tunefs - - screenshoting in directory /root/anaconda-screenshots/ instead of using exported display - - assembler code change in cpuid, smp.c - - there is some code to read the "raid superblock" (see doGetRaidSuperblock in isys/isys.c) - - new code for choosing to upgrade or not - - hack to remove /var/lib/rpm/__db.00[123] (with comment "make sure that the rpmdb doesn't have stale locks :/") - -* anaconda 8.0.92 vs 8.0.93 (rel. 0.20030108205243) - - drop xmode (bring up text mode in a remote xterm) - - code available to check the ability to do a mkbootdisk - (check size of vmlinuz + initrd, check size of floppy) - - drop "-Odir_index" option to ext3 tunefs - (with comment "add back -Odir_index when htree is safe") - - waitForLink added to loader2/net.c using added ethtool thingy (get_ethtool_link_status, get_link_status) - - OS390 fdasd & z/IPL changes - - for kickstart, new option "--ignoremissing", (there were --ignoredeps and --resolvedeps) - - /usr/kerberos/lib in LD_LIBRARY_PATH - - these are symlinks so you cant make them mount points - otherexcept = ['/var/mail', '/usr/bin/X11', '/usr/lib/X11', '/usr/tmp'] - - elif self.mountpoint in otherexcept: - return _("The mount point %s cannot be used. It must " - "be a symbolic link for proper system " - "operation. Please select a different " - "mount point.") % (self.mountpoint,) - - -* hwdata 0.47 (redhat 8.0) vs 0.62 (redhat 8.1 beta1 phoebe) - - pcitable & upgradelist - - replace eepro100 with e100 - - switch 0x1106 0x3059 "via82cxxx_audio" to "unknown" - - Cards - - remove most swcursor with comment: - # mharris - Nov 23, 2002 - Commented out the swcursor option, if it is still - # needed, then lets disable it right in the driver completely, or possibly - # fix it. - - using driver "nv" for GeForce4 and Quadro4 with comment: - # mharris - Nov 23, 2002 - enabling "nv" driver for GeForce 4 and Quadro 4 as - # CVS XFree86 support them now in 4.2.99.2 - - special options "externDisp" and "internDisp" for NeoMagic cards - together with CHIPSET - -* kudzu 0.99.69 (redhat 8.0) vs 0.99.83 (redhat 8.1 beta1 phoebe) - - don't read eepro100 entries from the pcitable - - handle compressed modules - - many changes in PS/2 mouse detection, and handle "intellips/2" mouse - - changes in PnP serial modem detection - - use "udf,iso9660" option for cdrom entry in fstab - (note that comma separated choice of filesystems *is* allowed, though not - documented in fstab(5)) diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO deleted file mode 100644 index e6f2da038..000000000 --- a/docs/diskdrake.TODO +++ /dev/null @@ -1,23 +0,0 @@ -- test what windows can handle (the number of partitions) -- better keyboard focus handling -- end sector in Create -- add warnings for scsi drives if you create more than sdx15 -- the information put in save/restore partitions must be cleaned -(remove mounted/formatted/..., also remove the Data::Dumper dependency) -- test, test, test -- do not allow swap partitions above 2Gigs -- wanting the first partition to be extended is not used -- maybe warn if a mounted partition change of dev number -- text version -- better error handling (what to do if we find a bad partition table?) -- display the information about the correspondance color2type -- handle the partition labels (missing information here) -- add comments in the code -- add documentation -- handle the `luke' case (main extended partition must be extended) -- ability to batch actions (like chained moves) -- add a verification after fdiskReadPartitionTable that the start_cyl, -end_cyl... do correspond to start and start+size. For the moment, this -information is just discarded :( -This verif can't be done in fdiskReadPartitionTable as start is relative in -extended partitions diff --git a/docs/drakfont/Makefile b/docs/drakfont/Makefile deleted file mode 100644 index b70b4a0c8..000000000 --- a/docs/drakfont/Makefile +++ /dev/null @@ -1,57 +0,0 @@ -# -# -# Project : Projet Libre -# file : pki.tex -# Date : Thu Jun 21 19:26:19 CEST 2001 -# (o- Id : DUPONT Sebastien -# /\ mail : <dupont_s@epita.fr> -# Y_/___________________________________________ -# - -RM = @rm -f - -CD = @cd - -ECHO = @echo - -PRINTF = @echo -n - -FILE = drakfont - -DVI = @dvips -j0 -Pcmz -Pamz -o - -PS = @ps2pdf - -LATEX = @latex - -normal : - $(ECHO) '[35m/*--LATEX--*/[0m' - $(LATEX) $(FILE).tex - -all : - $(ECHO) '/*----------latex -> dvi -> ps -> pdf------------' - $(ECHO) '[35m/*--LATEX--*/[0m' - $(LATEX) $(FILE).tex - $(ECHO) '[35m/*--DVI -> PS--*/[0m' - $(DVI) $(FILE).ps $(FILE).dvi - $(ECHO) '[35m/*--PS -> PDF--*/[0m' - $(PS) $(FILE).ps - $(ECHO) '[35m/*--That s all--*/[0m' - - -ps : normal - $(ECHO) '[35m/*--DVI -> PS--*/[0m' - $(DVI) $(FILE).ps $(FILE).dvi - $(ECHO) '[35m/*--That s all--*/[0m' - -pdf : ps - $(ECHO) '[35m/*--PS -> PDF--*/[0m' - $(PS) $(FILE).ps - $(ECHO) '[35m/*--That s all--*/[0m' - -clean : - $(RM) $(FILE).toc $(FILE).log $(FILE).aux *~ - -fclean : - make clean - $(RM) $(FILE).ps $(FILE).pdf $(FILE).dvi diff --git a/docs/drakfont/dia_srcs/drakfont.dia b/docs/drakfont/dia_srcs/drakfont.dia Binary files differdeleted file mode 100644 index c4502a12e..000000000 --- a/docs/drakfont/dia_srcs/drakfont.dia +++ /dev/null diff --git a/docs/drakfont/dia_srcs/drakfont_install.dia b/docs/drakfont/dia_srcs/drakfont_install.dia Binary files differdeleted file mode 100644 index 737c19b9f..000000000 --- a/docs/drakfont/dia_srcs/drakfont_install.dia +++ /dev/null diff --git a/docs/drakfont/dia_srcs/drakfont_uninstall.dia b/docs/drakfont/dia_srcs/drakfont_uninstall.dia Binary files differdeleted file mode 100644 index c06f92dd6..000000000 --- a/docs/drakfont/dia_srcs/drakfont_uninstall.dia +++ /dev/null diff --git a/docs/drakfont/drakfont.jpg b/docs/drakfont/drakfont.jpg Binary files differdeleted file mode 100644 index 898dfe440..000000000 --- a/docs/drakfont/drakfont.jpg +++ /dev/null diff --git a/docs/drakfont/drakfont.tex b/docs/drakfont/drakfont.tex deleted file mode 100644 index bbc936e5b..000000000 --- a/docs/drakfont/drakfont.tex +++ /dev/null @@ -1,152 +0,0 @@ -%\documentclass[pdftex]{article} \usepackage{hyperref} . -%\documentclass[pdftex,onecolumn,11pt,oneside]{article} -\documentclass[onecolumn,11pt,oneside]{article}%seminar} -%\usepackage[pdftex]{hyperref} -\usepackage{isolatin1} -%\ifx\pdfoutput\undefined - -\usepackage[dvips]{graphicx} -%\else -%\usepackage[pdftex]{graphicx} -%\usepackage[pdftex]{hyperref} -%\usepackage{type1cm} -%\fi -%\pdfoutput=1 -\usepackage{color,graphicx,shortvrb,epsfig,verbatim,tabularx} -\usepackage{url} -\usepackage{hyperref} -\urlstyle{sf} -\usepackage{fancyheadings} -\usepackage{program} -\usepackage{ulem} -\usepackage{amsfonts} -\usepackage{xspace} -\usepackage[english,francais]{babel} -\pagestyle{fancy} -\newcommand{\trtitle}{Drakfont\\ fonts importation for mandrake linux} -\DeclareGraphicsRule{.ps}{eps}{.ps}{} -\DeclareGraphicsExtensions{.ps} -\renewcommand\star{{\ttfamily*}} -\let\package\textsf -\newlength{\gxlen} -\settowidth{\gxlen}{\package{graphicx}: } -\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}} -\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}} -\MakeShortVerb{\|} -\begin{document} -\title{$Drakfont$ fonts importation for mandrake linux} - -\begin{figure}%[ht] -\begin{center} -%\caption{Exemple d'image} -\mbox{\epsfig{file=mandrake.ps}}\\ %,height=1in,width=2in}}\\ -%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}} -\end{center} -\end{figure} -%\begin{figure} -%\begin{center} - -%\end{center} -%\end{figure} -\author{Dupont Sebastien \\ sdupont@mandrakesoft.com} -\date{05/10/2001} -\pagestyle{myheadings} -\markright{\scriptsize \trtitle} -\title{\bf \trtitle} -\maketitle -\section{drakfont Future Overview} - -\paragraph{Fonts import :\\} -\begin{itemize} -\item pfb ( Adobe Type 1 binary ) -\item pfa ( Adobe Type 1 ASCII ) -\item ttf ( True-Type ) -\item pcf.gz -\item Speedo -\item pfa ( Adobe Type 1 ASCII ) -\item ttf ( True-Type ) -\item and Bitmap (PCF, BDF, and SNF) -\end{itemize} - - -\paragraph{Features} -\begin{itemize} -\item Install fonts from any directory -\item Get windows fonts on any vfat partitions -\item UN-installation of any fonts (even if not installed through drakfont) -\end{itemize} - - -\paragraph{Support} -\begin{itemize} -\item Xfs -\item ghostscript \& printer -\item Staroffice \& printer -\item abiword -\item Koffice, Gnumeric, ... studying -\item all fonts supported by printer -\item ( aliases by RENDER in Xfree86 .... -> later ) -\end{itemize} - - -\section{Window interface:} -\begin{itemize} -\item -\item Fontselectiondialog widget -\item Command buttons under Fontselectiondialog (like the actual frontend). -\item Commands buttons: -\item import from windows partition. -\item import from all fat32 partitions and look for winnt/windows/font -\item and import all (delete doublon) but don't import if already exist. -\item import from directory -\item look for if it exist before for each font and not delete the original. -\item (replace all, no, none) -\item expert options: -\item ask the directory, and look for if it exist before -\item if it exist ask: (replace all, no, none) -\item uninstall with list per font type -\item Expert additional switch -\item option support: ghostscript, Staroffice, etc... -\item check-button. (by default all check) -\item Printer Application Fonts Support... -\item check-button. (by default all check) -\end{itemize} - -\section{Command line} -\paragraph{Font Importation and monitoring application\\} -\-\-windows\_import : import from all available windows partitions. \\ -\-\-strong : strong verification of font.\\ -\-\-install : accept any font file and any directory.\\ -\-\-uninstall : uninstall any font or any directory of font.\\ -\-\-replace : replace all font if already exist\\ -\-\-application : 0 none application.\\ - : 1 all application available supported.\\ - : name\_of\_application" like staroffice for only this one.\\ - -\section{Graphics} - -to visualize the conceptual graphics please see:\\ -drakfont.jpg\\ -drakfont\_install\.jpg\\ -\& drakfont\_uninstall.jpg\\ - - - -%\begin{figure}%[ht] -%\begin{center} -%\caption{Exemple d'image} -%\mbox{\epsfig{file=drakfont_install.ps}}\\ %,height=1in,width=2in}}\\ -%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}} -%\end{center} -%\end{figure} - - -%\begin{figure}%[ht] -%\begin{center} -%\caption{Exemple d'image} -%\mbox{\epsfig{file=drakfont_uninstall.eps}}\\ %,height=1in,width=2in}}\\ -%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}} -%\end{center} -%\end{figure} - -\end{document} diff --git a/docs/drakfont/drakfont_install.jpg b/docs/drakfont/drakfont_install.jpg Binary files differdeleted file mode 100644 index 795a5a711..000000000 --- a/docs/drakfont/drakfont_install.jpg +++ /dev/null diff --git a/docs/drakfont/drakfont_uninstall.jpg b/docs/drakfont/drakfont_uninstall.jpg Binary files differdeleted file mode 100644 index 711f28e77..000000000 --- a/docs/drakfont/drakfont_uninstall.jpg +++ /dev/null diff --git a/docs/drakfont/mandrake.ps b/docs/drakfont/mandrake.ps deleted file mode 100644 index 1af9d5bb4..000000000 --- a/docs/drakfont/mandrake.ps +++ /dev/null @@ -1,534 +0,0 @@ -%!PS-Adobe-3.0 -%%Creator: GIMP PostScript file plugin V 1.12 by Peter Kirchgessner -%%Title: /home/seb/drakfont/mandrake.ps -%%CreationDate: Fri Oct 5 18:28:29 2001 -%%DocumentData: Clean7Bit -%%LanguageLevel: 2 -%%Pages: 1 -%%BoundingBox: 14 14 424 84 -%%EndComments -%%BeginProlog -% Use own dictionary to avoid conflicts -10 dict begin -%%EndProlog -%%Page: 1 1 -% Translate for offset -14.173228 14.173228 translate -% Translate to begin of first scanline -0.000000 69.000000 translate -409.000000 -69.000000 scale -% Image geometry -409 69 8 -% Transformation matrix -[ 409 0 0 69 0 0 ] -% Strings to hold RGB-samples per scanline -/rstr 409 string def -/gstr 409 string def -/bstr 409 string def -{currentfile /ASCII85Decode filter /RunLengthDecode filter rstr readstring pop} -{currentfile /ASCII85Decode filter /RunLengthDecode filter gstr readstring pop} -{currentfile /ASCII85Decode filter /RunLengthDecode filter bstr readstring pop} -true 3 -%%BeginData: 29637 ASCII Bytes -colorimage -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -bl7e@q"4E6s+13Ds*t~> -bl7e@m,@els+13Ds*t~> -bl7e@T5=@Ts+13Ds*t~> -c2RqDnG2D<JcC<$U&TW~> -c2RqDl/9_PJcC<$U&TW~> -c2RqD]71%QJcC<$U&TW~> -cMn+JnG;n/i;S<-JcDJEJ,~> -cMn+JmbuTmh#;m)JcDJEJ,~> -cMn+Jie^A<a8UYiJcDJEJ,~> -cMn+DnbMk)f)($uJcDJEJ,~> -cMn+DjkIhQchi:nJcDJEJ,~> -cMn+DST5n_V>GiDJcDJEJ,~> -ci47Jn+l_KeBdl?s+13Es*t~> -ci47Jkhjh)WP\C\s+13Es*t~> -ci47J^4K&h%!hSus+13Es*t~> -d/OCNnbW%Rn_2+VJcC<$UAo`~> -d/OCNn);p@^TP0>JcC<$UAo`~> -d/OCNj+q1n%LcV6JcC<$UAo`~> -d/OCHnG2eMo&%LUJcC<$UAo`~> -d/OCHjkS+u^p135JcC<$UAo`~> -d/OCHTl`:/%Lk8_JcC<$UAo`~> -lMgqbp\sLY$2s;fp\"1NjN$P:s+13Es*t~> -lMgqbp\sLY$2s,He&K8A[BAeGs+13Es*t~> -lMgqbq>T^[$2r)%;B-/V%3+S`s+13Es*t~> -li.(dk/mMerri>mqY9a_oE+4!k(3P`s.]OD~> -li.(dk/mMersJbqin;Gk_SWgdk(3P`s.]OD~> -li.(dmFhC'rsJbkMeO[R%M'!Pk(3P`s.]OD~> -m/I4fjeV8=m/I1an+l\UoE4C(gAQU&JcDMFJ,~> -m/I4fje_>>m/I4bjk\5#rk\cKUso9ns+13Fs*t~> -m/I4flbMl_m/IIiWH^N?%Ls!Y%&s2Vs+13Fs*t~> -mJd@ggl^4WrU'UfrU9RVp&4Lbm*a;WJcC<$U]5i~> -mJd@gglg:XrU'UfrTiCk`r3aV];N^FJcC<$U]5i~> -mJd@gjg<_0rU'UfrR6L%+8lZO%1J$fJcC<$U]5i~> -mf*Iik)["5qX+:crq-'^p&+Famb#_TJcC<$U]5i~> -mf*Iik)d(6qX+:drq#.'b/=1p"21eLoR[$ns.fUE~> -mf*IilEnChqX+:drp>Y\/e\'l!Xrf8JcC<$U]5i~> -n,F"!nYD2sp&>!hp%nOYp@\.TrV6BpqX41Qqt(!\hT52;s+13Fs*t~> -n,F"!nYM8tp&>!hm-F!$l0Rm2rV6BqqW?VZ`;IIS^p(69JcC<$U]5i~> -n,F"!o>7BVp&>!h[uQH0T!cSkrV6BqqQkK3(&JIB%70K7s+13Fs*t~> -n,FI)^NR3SrVuomhY$U:q"X[\qY0^VpA+[ds82B`p\"CT!oq>fJcC<$U]5i~> -n,FI)^j!BUrVuomg;hIdf%Jg6kNM-qn+?PWs82-AeAqF&!jo2uJcC<$U]5i~> -n,FI)d@e5>rVuom_BM'9>A8)$G_hZm`nC%as80]m<Zq5K!Y$ODJcC<$U]5i~> -nG`[jf8YC8q>UBuqVJd?m.L&NpAajeq#1!kp%eIZp%e4]kKW1@s+13Fs*t~> -nG`[jf8YC8q>UC0qVJQ`]>_n8c-Xnhg"Y?>kiqElf#bi+_?.6OkCNYas.fUE~> -nG`[jhm8^'q>UC0qVI;C%2gQM4%)eE@rZaAKVFlk?7QZc%Kd4N"m:I:JcDMFJ,~> -nc&gmm]UN9m/I"a#6+8C]\r,HrUg-_rq??c!VZ3]oE4O8iVnE.JcDPGJ,~> -nc&gmm]UQ:m/I"a(&mjRYd1mV_SX4/`lQ?JcdC7lcH*p!_?7KSh>W!*JcDPGJ,~> -nc&gmnApp+m/I"a(&mjRCCL^_%M'-d*@NX&6:t6X5:%$?%Km:P%*&9ts+13Gs*t~> -nc&dibD(8oq>C6srp\(Nj6cI(oE4^PjnOE,JcDPGJ,~> -nc&dibD(;pq>C6srp\(:[(O6N_?7]o`5D>d"2VXrpjrHrs.o[F~> -nc&dif<14fq>C6qrp\&r%J^M6%g3L](D78P%KT)pJcC<$V#Pr~> -o)Apnm'1H"lMg\\#6!f&dH0iglLY2OnG*"XrsA\uq"XjgqtB^[JcC<$\c70~> -o)ApnmBLT$lMg\\#6!f&\@0,fm(rqD`5^X+rqQL"rpo1Err;l[jSON.JcE:\J,~> -o)Apnm`LrrlMg\\"T@T$+q<fI"VDOmC#f3frsA\WEU3W(qji66JcC<$\c70~> -o)Amjb*?Map%eUlqr>9CjmVg,oEY'_p\"4Rr;QWo$2s&VmeZnNp>>Uqs+13\s*t~> -o)Amjb*?Pbp%eUlqr>2i[_BTE_?e'"cIM%Anb`=`rsAYegtV](lHe5ZJcC<$\c70~> -o)Amjf"$U`p%eUjqr=df%I4K1%hp3M>Ci]roD\[f$2s$mBDVSN(rc6#s+13\s*t~> -o)Am`[;pHKrV6BrptE13kO@d/(%q:pq"X[Yp%\Lcs8M65p?qSEe(skOs+13\s*t~> -o)Am`[W6TMrV6BrptE!V\A.@H(;n2:dFR%+k3DR:s8W)^b0fDEf>-5=JcC<$\c70~> -o)Am`bFssSrV6BqptC`;%I4K?%hp-C8mQ7RKs0)+s8W)^Q8?5H>YX&NJcC<$\c70~> -oD]!me>?o:lhCD`rq+[OhWjXqo`+Uap(-omq"aUUq=E"uo]5Yem/DS9JcE:\J,~> -oD]!meYd,>lhCD`rq+[DZ+@a9_A'o,aNMlWf%T6KmIg(uccXqbaR&nWs+13\s*t~> -oD]!mgr,DGlhCD_rq+ZT%1VS4'b:op,r7b[?>XPE\DZu+?7Vct]^5WKs+13\s*t~> -oD]!f^6W?3nb2terp\+KipH=!o`+Uap($ilq"O+(guI)Go(DbUrdk*#s1JA^~> -oD]!f^6`H5nb2terp\+:Zb4-;_@si+aNVuZf\>QHa2#=.eDfTZqu20HJcEC_J,~> -oD]!fcFJk?nb2tcrp\*'%H\-7%h]a,2F:;PDg@Us1*L+oT;9Krrdk*#s1JA^~> -oD]!]YCC#np\"OjrThAHk3qp%o_nFnp@?/4i8NJDeEQYKc-"5QrlP;YVY^&e!rCEmrQ58a`3ciI -d/OCNp#k&U\;/o>h#@ZZp#k&V\rFr4iVs>cn`8KObf\)MdFe!gir92]puU2Tbl5cb^&\&$s*t~> -oD]!]YCC#np\"OjrThA1\%]]>_A'o-aN2ZXdCHg.]=keag\&b7bKS30b6#MWqY1!kqUNslb6?&0 -`3ciId/OCNp#k&U\VT)@h#@ZZp#k&V]8k/7iVs>cn`8KObfe/NdFn'hir9DcpuU2Tbfe2P^V9T9 -s*t~> -oD]!]aJt!3p\"OhrTh?P%H@p+%hp!3-mB]:J%7BArWNL]p"S9UgY;_]!n>*`p\t<kinaRe"PMAM -b59Qc#laScjPJ7fjo4'8#laScjPS@lgAU"1%0#nbjk\\Fg=b?Co`!kM"oe>aj5&JhgAfS$qjmb;~> -o`#-pfr/arg&(FA"oIDohWO@goFpf^hTE^[d+I+3\@B)hioYiBMk'a<!fM0fq#:d$hS6+`T:M*e -C1Mkcdf0[Qg;:S9ZD;SVjSds8$N8Ym]Xb>FH>(\%jSoMbptsB7]<eK2rgs@hW2mGdrT4%`rTDG@ -ZDXGrT)saenX]]1~> -o`#-pfr/asg&(FA"oIDmZ+.O/_@s_sYb@bpYJAE'\@B)hioYlDMk'a<!fM3gq#:d$hS?1aT:M*e -C1Mnddf0[Qg;:V:ZD;SWjSds8$N8Ym]XkDGH>1b&jSoMbptsE9]<eK2rgs@hW3!MerT4%`rTDG@ -ZDXGrT)safnX]]1~> -o`#-phSl(>g&(FA"T.;a%1V;,rs]MI#nAC@F#gb?\]3XkXJrM=rP&E>SaH4P%/o8;a1oC'[\K.H -S+>#-$N9&:eC)RXUQ4F6hZ!r]j3uH'bep?>eGA8+#laY_hUg0!`PMPg"iA7"cKP5grs&Ggh:9`f -_>_1NY+"mOs*t~> -o`#-k`1LULi;W?J"o6r`jR)O$oH!MhhT2q%V6%_Zamms?io]goWKMCCDf9T7A7i^Wq>Uls_PM^# -EG/W[H],6!df0[K[s3%5GACN#iVq^6$MV#aF)?#9>[lFajo6"lim#-6Ob7puCMe$3G'nq%P-t2M -rseqc_lA`EF(f,p@pNR+qYpZso@s5Bs*t~> -o`#-k`1U[Ni;W?J"o6r[[Cj?=_B$G(Yb-l2RA-dea2uK^io]goWfhOEDf9T7A7i^Wq>Uls_PM^# -EG/W[H]5<"df0[K[s<.7GACN$iVq^6$MV&bFDc2;>[uLbjo6"lim#-6Ob7puCMe$3G'nq%PICAO -rseqd_lA`EF(f,p@pNU,qYpZso@s5Bs*t~> -o`#-kd(bp"i;W?J"8U`5%HJ$!%2'$U$Vu+1*4lc6i8Wnik-LYHT`1PdTU(S\rV?I%p=$pYT:h[3 -H]"0#n'_4CpW&ntT;8$8L>i-grsJMAUn"!NSr/*QqrRhkr9<%c`3ueET:MRGTqnTfZa\-TkPl"i -kL[_[W1f]IQ'I8]k5,)[rq>LQW;hA~> -o`#*d[?tH4iq!*Orq+U^kO]kem,#gfX.uc3c/-+Vg@4Y3s8V`JaII`jBOk^aA?5P&rseqYZA*4- -An"tc][5[4df0XJgUa)+DIZpqkM?.FpYNZaKQL^.E9$r[rtYF__PW-/@pN2?>?b?@A7fLoF`b+j -kl1kZ]qg0nA7#49!`N1[rVm*#m+]aaPkD!TJ,~> -o`#*d[?tH5iq!*Qrq+UM_o(`U+2GLmT8\SmWkcK^ZHL,*n,E@eo\RZZIq35'An#;Pq>1+#rR\?0 -D.R<g>][R)iqLn$$2<2cTmU`f>^5GfrsJMW^Sup0@p<p4roX4qqq/c_LiHp1=B\p5>[_/TBQ/*: -\,>Ii%J7B1J8/V$='/O*;cr&Xrs&Gggrugaor.n@~> -o`#*daL[Uhiq!*Qrq+T=&eX=;rs]qU$49S'^m5IRb>Su4rr<#jhT2duQC+#+P`30KqYq$'hor9p -R$j.jL:kmmpX9'JpY39ST:_@%Np#6u$MWDlWLorNKS\[fk5Q1nimu&PTTkChKS>2>Od;B(T;/.& -r94.io[1OUS<f1eIXHKcG2iK##6"&QgW-\oW;hA~> -o`#*_Y**4%ipm$Orp7u)p$;5no'G5SYcFP#`80S<da$mpg!]Zqs8DcYY`!(2BkCmdRIp@U%J7;r -C2Rg"@9\fPp%n[9rsAYqkKfKE@U+lYh>[f[o]t&"L1=JFlK8*_qpN'DH"C;]<*!I??<^cDA7fIh -AT[29lMhb#f;aXCARA><Dg6PQL$&F8rp%YE[[qAdm&9r7~> -o`#*_Y**4&ipm$Orp7_N`p:Jb^q6hCN/3h#`80S%YKl1M]Wh22s8DcYY`!(3BkCmdRIp@U%J7;r -C2Rg"@9eoRp%n[9rsAYqkKfNF@U+lYh>[f[o]t&#L1=JFlK8*_qpW-EH"C;]<**RB?X-rFA7fIh -AT[29lMh1hf;aXCARA><DuP"jL?AO9rp%YE[[qAem&9r7~> -o`#*__mY_]ipm$Orp619+6j@9%3>la$;[D7h<&&XcK!"r-M[W@rV>`pZBLK>R$E]4o_SRso[(%8 -R%0S,JXtfnqYnqC$2sJYcaTp<K:M;arsAYrld`SMP_,=gk5Q7phU/s3R#QQ;FaJO^I"dTHR$jJ2 -Rd9t<rsAY\`iu#$O*Z#%reLuJk5YJ\mb?C>^7Lk]W;hA~> -o`#*ZUkW8cipcsMp"fB8mIV+`m,#gfX.uc7h=(70ftQD>j2T+,rVm5nY_6SBEG/onK^em=$iSSQ -AoDX/BO>#Io$.1>roKu.@9o]!gA_B@WJ4hdV"!RI)#`C(R!*(K;HJLGZF-p8L1t./AnPUc]DUso -)>M+?H=pbn?DG-N`Pp?ss8VuHXd"9O@X..9s*t~> -o`#*ZV1rAeipcsMp"%[8mD9RQ]<IodLmP-[h=(70^o$&bj1r.lrVm5nZ%Q\DEG/onK^em=$iSSQ -AoDX/BO>&Jo$.1>roKu.@:#c"gA_B@WeOqfV"!RI)#`C)R!*(K;HJLGZF-p8LM:70AnPUd]_q'p -)>M+@H=pbn?DG-N`Pp?ss8VuHXd"9O@X74:s*t~> -o`#*Z_lo/TipcsMorV=Eljj%)&ISpQ:SPe`n,)Q69AoU*Sm:^^rsJ57Xc8[=R[9,,nGE4nrS5>X -Od;]1Ne"S/c2S%Jjhn-]K!+Xtrs%],YE=C=nE9fgrT2G=UmR0gG)iE)[BQToO-H$"R?WcQr9F;" -ps6[OR?rbYV7X[b`ROGXs81Tm\#Gs[PNf%GJ,~> -o`#*USpk'WipcsMo^2GHmdq7aj3"U,UTDDin,*+anBoYPs7bI*nbrIpl)/<.WHrAm@s759rsSJ2 -I:ACfH"^Ghc1oQ`#Q</JHsU*ip"TKOrR.Hg?!Y;?kPlCl^8$'h@ola#aP>qAk2+1GFD,9!@UY`" -lMhao^RTFYA7Bc1lgXH7o_\[gps#U\B4YY(l)=W4~> -o`#*UT710YipcsMo\e<Am_T^R[@rP8Q`A![n,*+anBoYPs7bI*nbrIpl)8B/WI&Gn@s@;:rsSJ2 -I:JIhH"^Ghc1oQ`#Q</JHsU-jp"TKOrR7Qi?!Y>@kPlCl^8$'h@ola$aP>qAk2+1HF_GB"@UYc# -lMhao^moOZA7Bf2lgXH7o_\[gps#U\B4YY)l)=W4~> -o`#*U^T!9KipcsMoS[$&m1'g>$OR5:U;YmVqu6WbdF%F_pYacqrVm5h`LVjeVOa*;PjJ;I$hVcD -Ln(08RYu[Aps&gDrS#,eNe"q<g]%NWg;9eIJ&_3FrttFU_PirgJp*g.gudh_hT2LdS!f\/M6-I: -ru(IQ]q_!^O-@uWnF?&@qu?]ke&%uMR$+!(W;hA~> -o`#-TSpXpVgA^[C"T@]_p\""I$M!,kX.uc7h=(7?rr39#nF?DUrqQ0`rr3B*gRr(l_2W\Q@;"d$ -rs\kUW+'bVOa^kHB&<L2rs/AEVfl9Mg%sJ'#Pc0+F'E),qrn%trnXZ6D.[6aLXGVgrr<#sm`B`\ ->$>!/P4JSO$NB_ai7ci8j6?C=rVn,AnE]E#]pj(TASZtFkNV-or9Wb8k/F0@AnGb*cfjZYk3)`H -s*t~> -o`#-TT6t$XgA^[C"T@N>dDbRk$Ga!9LmP-[h=(7?rr39#nF?DUrqQ0`rr3B*gS&.n_2`bR@;+j% -rs\kUW+'eWP($tIBAWU3rs/AEVfl9Ng%sJ'#Pc0,F'E,-qrn%trnX]7D.[6bLXGVgrr<#sm`Bc] ->$>!/P4JSO$NB_ai7cl:j6?C=rVn,AnE]E#]ps.UASd(HkN_3pr9`h9k/F3AAnGb*cfjZZk3)`H -s*t~> -o`#-T^Sd0Lh#?mE"T?Pj8f@%,#n77L:SPe`n,*+`rs8Jjnb`@cq"=O`rsSh_^m'YkXJMAJMs($<% -/o#$Nf(?RWL/KohYk_!#PlogUksTSqV2#Tps-RHLk+4Vkl2P"ilJBrR?NDkdI@&4s8W&caeauPL -OslIo)8RqrqGmFjQ#7bn,!%^s!.O8nF5Vd]qLj]S#+d)n*KQAnaQ&6d_hlKR@9u)mdKW2mf'BhJ -,~> -p&>9rfUI1qAAA*6rr_uaq"=(I#jTO4W5RN\qu6*b%/\5;@X67aIVN;&b5VD?%K>h.I9iVgS:>$Q -E97)srseu&j4W#8g[4q*f#-ePrVm?+nD;IBrVulhiRu`LrqQL&rp\gma3WGQSnqYIiVrfU$iTGD -a6`g)o\S-WrVQU'rTr7if@K0ao\.C>rVlg-o=(-$>B&X%s8W)nimu]Zq>V-,le:"AlMgh`q8/\K -BP(dkW9sT^rr`5OC0CL:32Q3Grq"sk`4`U`XfSb5[(FcZrr;`7_S!FWKl(F7COr.a[$dWS`50!q -Y)I=3B52a`ZFI90PP;6[J,~> -p&>9rfUI1qA\\37rri&Tfuh5$_?d`GLo&&Gn,*+Rrs\eJS76chQ@<RWB$1,Prsetr]7!t[aII`i ->B/d(r;R6*puL,ZfA#]jm+92@rr)j+rp\difDYaKo\nKRn,E+^%K>kSdE'\f^7T4HCZ59krsSel -f>m7Wrq,'tir/cS!r_K>rmqA<rUegbg&:pM&+d8uBNoH9rr<#tpu9oVrV?I,rTi4kf'<87s7sR( -H>$o$D5ck$r;Qltf5"Rg=?*/Js8MWGcG[H+YcY"3['dNop&>!cb/:m&VhJu"B5<*mZa?0pm)?fO -]!%'3AnPk)S[,f5R[!QLs*t~> -p&>9rgq9PJM9,Ydrri%ZC+^+e%L<LO$BrEan,*+Rrs\eS]T/*!ZDj@WMUDG&rsetsc_uAqb.Xg> -KSegir;R6*q<I#!ioT_.nD`!err)j+rq#=.ir/oVp?CVroD\Ob%K>t_hUpZCcbH$,L#N%0rsSeq -in3f#rq>O6lM^V[!r_WLro+.MrV#=)jSf)X&+dlSRtQUXrr<#tq<Hu!rV?I,rUAn.iU?dGs7t$U -Vja$?QaH/Zr;QltfoULXFuZ\rs8M]Rh:U3%b/hWGc-=Vmp\t3eg"4[!`N>`"R@UCobg!f8m+Bn9 -dE/\dR@0SC^<FsK]X.@8s*t~> -p&>9qe<bGiA\.^/rri;fq=jRMoEO?eX3pA4rpKdpp:Z]!N7jqXD.7%`qYpL'qp)$GD:$7nHsp9; -li$i-rqG-bVh9;XWO9ORQuhZnrpJ^ob/:HB[J'1A`k&CNP0Nt&ruh:,e%:laFG6?XK4J52kPk5< -g!RmUUOqY(gr[+(Ls#\qrsnq`b-[7VNMEen_5D=oqYpL+m]_pd>`%bGs8D-*^8cn'rVca4rqG*\ -UR%RPTs=LpoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfH+UlpI\G'/(ZK85MVUXoD3Z^lo'H#IA. -B52C3Jph<eeu=peJpMEMAnPdpG_(KqBRfHQs*t~> -p&>9qeX1VkB"Rm1rri;ahU9C2_?RE4UXAN,rpKdpp:Z]!N7jqXD.7(aqYpL'qp)$GD:$7oHsp9; -li$i-rqG-bVh9>YWO9RTQuq`orpJ^ob/:HB[J'1Aa1ALOPKj('ruh:,e@_)dFbQHYK4J53kPk5< -g!RmVUP%_)grd1)M9Gksrsnqab-[7VNMEen_5D@qqYpL+m]i!e>`%bGs8D-*^T*"(rVca4rqG*\ -Um@[QU9XUqoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfK,UlpI\G'/(ZK85MWUt5M4[%3#(H#IA. -B52C3Jph<feuG!fJpMEMAnPdpG_(KqBRfHQs*t~> -p&>9qft+#DNPkS`rri;GI7tRI%L*@LG1#aTrpKdpp<0q%SCt?PSs,,KqYpL'qq8lGL!\,[W02b$ -li$i-rqPR,`2olF`Qm#^\sr*crpo:3gXjTRanGAcg!Rs[\(^fXruh:0i6o0.Trl)DXHnR#kPk;D -j58S@_Q2qsjkJ/#Yh8pRrsnqigWd+&Zbjr8e\n',qYpL+m_u]%Jskp(s8D<?eAeW;rVca,rqPO' -_R[J$_9)TSoYn85rg<nYWS.(GrVlruke@"p3O[W8qrZY\_R?YIUnaccXKT%E_;Y@\aM+mZV4X3E -R@BhGX/VG]f#G5%X/DV[R@0P9V5p_tQ^[?Fs*t~> -p&>9qh3`IuAXiDbrr_rbq"=%H"QI&9o)A"U*:U4g@'&CoM/d$8Re?^\rp@4;=eXcaRs8=HV""B` -,Q6oOY@q-TL6-A%LjW]Uk5P%GR[TP$I!M[1Y`jQ^I!fUSo_e_Fqq]5`?s\8GL2:U?@9ecXrRd?u -QBI#DJ()9=P_4-kL%YKFp!UC%?<qlDE-@"k@q49irr3PoWJFtfV""E_i5)4IFCTpprr4)=jN*g$ -D1d%QHuQ7cnZ7LaAnG^mH'tnN`mNB$me,iCi[s?cpsm0RKlLX0=^#'8?=RSaG_1XmkFcNo?"%;V -An>FX>?Y-1Gg1_G>$PKHralFG?X-c<=BBS.Y5a"~> -p&>9qh3iP!AXrJcrri#Ufuh5#_?@3>b4>PuruCO6LL@4DZANX3A"3/ks8MDqFBYBr\XRhO?DR)i -s!.L-bcb\bCPIpiI#*/[G38esTUVC9N-orM`j(_WH$k!QI.[@:1]-"IT3tuSP_O!hCLLJ,m/>S$ -PEqAeEe)WUY`sc`AqfpXrq4^MJR2W/QuR;)L1=cKqYpL+l)KPJ?)6uirSYPgMf`H\o`"k4rT)%i -AT!0GEdVi/qsgbCDe<TpCjDGQ^W+[PkjJ-.rSfElo_?tPTnRJs?<LH:>[CoPD0UYebNGR5>[:cL -AnGU`?<^T8=*`&@?s6fDAH$0H@p`JE>$+jJl)t&:~> -p&>9qh7BGJO0/-Irri"VC+^+d%Km4Eb4>PuruCOJYD'@D^TaArN32dQs8MH3UO9'!ah4I3K!+VB -s!.L1grc+;Js;grVm*+\O66H7^q@=jZ`'b5eB>>$V5L5[Sb2j[1]-:d^Q<o(S=,b7SW\Vqm/>nQ -\%/rNTr-Gkb.+RLPbIdMrq>6rX,)+]TUDUZYEajsqYpL+l,KrjJZeMBrTDbLZ(mDOo`"k4rT`+M -OGT3hTr=U#qshD(T:)+9SYj!@e(<I8mIKr7rSfj#o_@Cq_6'AqNJ3%>LlR^eSu&Kjg#oo6Mi<gc -R@0G,NerOFIZr$VOGJgWQC+)-Q&gfYLP:29l)t&:~> -p&>9ri0S\"A;0RGrri;fq=jRLoE4*fhYld?6gCXi@*J&VNH8W?MXg`Hqok^>C=;@PQZHJ=](Q+' -rp%Lt?rMQ_`P77JBOP/&l2U+CMfW]JAS$."@r6'lA7f4[l2CX3qprKA=]_$-c+SaGB4,#@nb_+7 -M/R3CCN#8KEbJrj>'B93oZXOW<,AJK_jGIX@p<^+rVuosf;*h$?,H=6hQhEB?sHc`mJm4bi5(4Q -EjE?WHZ!A@o('&0AS#IdBP_jEO-ucBZ*q3U`p!F%s81?YR<W=O<Duq-Am\kN&Rf6aDJsd;KO7ef -@q'%^@p2q3<t'#lAm/8?A79%]AR/=6<rm7(Y5a"~> -p&>9ri0\b#A;9XHrri;`hU0=0_?70AhYld?6gCXi@*J&VNcS`AMt-iIqok^>CXVIQQucS?](Q+' -rp%Lt?rVZa`P77JBOP/&l2U+CN,rfKAS$."A8Z6nA7f4\l2CX3qprKA=]_$-c+SdHB4,&Anb_+7 -MK!BECN,AMEbJrj>'K?4oZaUX<,AJK_jPRZ@p<a,rVuosf;3n%?GcF7hm.NC?sHfbmJm4bi5(4R -F0`HXHu<JBo(')2AS#IdBP_jEO-ucBZ*q3U`p!F%s81BZR<W=O<Dut/B4,%P&Rf6aDJsg<Kj\"j -@q'%^@p2q3=:B/nB3SJCART.^AR/=6=93C*Y5a"~> -p&>9ri4>bPOe;19rri;8HV,1C%Kd.DhYld?6gDU_K$Nf-Z_<_HU%/0_qq&W>K$ro&\tP+6_"Ia- -rpACTOEHPj`P8(;RZ`8jl2U+TT9u1=Q^+/*LkgkKQ'm\hl2CX$qr-#2L3B3*c+Td@R?3$'nb_4I -SX,h7S=?^MQBIJoJro?up"[`^H\&04_kiuoQ%k"NrVuosh8?4OJB%<]jijTgOG\IOmJm4bkLHeg -KsJ@mVk0*@o('PkR$a;0R[p7U[(F2obKeJ^fC&Y<ruh3rdCZ6COFVLsH[U3kM34-nStDk)UOdT> -N0K]tQ%s\aFps/NMgBPoMisHqQ]-:hFodB_Y5a"~> -o`#-UP]^SJEpNAts7??ep$D;Pj2'a@s$ZkAU1IrnpXt[MAn6;Vs8MDpDHa4-l`?4a>@#qYs8MT- -Uh!JR`T-LO]o6r=>bplho%(RBIqiCm<HOn>XaY%t?!u^ls"s]2]Tc]&S^Zrtj/n,S?<t/8rU&.L -P(%.V@TRN?IUlARM<ju\Z$BA\]%ZT=bE7$Y?%_A?s!RZ_T6+:JgA'O+AS-3k;,aC]s8ColO^)V7 -i9Sg_H!=\@pX=Lu@:]@L6"akGDfpAVKo(nYS%ALrl+*7-B44b;GbVLOYFBWC@qB:fBnaC,WMYDh -BP(^[H)@R?YKGP5WMueYFD>Du?YQ>8W<09Gn#l\@~> -o`#-UP]^SJF6iJu"SCd-ai!M_!jnlbli0BPgnSFnhY5]cF(Ss2mJm1Q[r,BQl0GF5CKk,uqZ$Qc -`2$pDIDt7:kIupq?sTSts74aUQ[`aY<`X@9ZE8UlAmJj*rr4hRhS#.Z=.Rh,o]**2D-gP[p&4:. -^6="\A7AY\T7:BM:l=T7bcuFoA\-U`m)tQ:@U4WMrr4AB`h.?WA_Qq9XCZ!i>#A4rn,N@F^l_l9 -^>S>*T6XXLl1`YT@:<^GAjL'CC2\6@J;&iAR%1bbropt^G\:Ga;L,"B[BH'B@Uit^C2&C<YGnCS -E+iim??rEIWNXIt^T"31P'(MOA7')Iri#t&b3uM5J,~> -o`#-U[\T=SPO%l@"S@FZ.M;%X!Y#=mli0BPhnbV3hY5^3U6q+2mJm1Rc(B?gl0H9rSV_jLqZ$Qd -f>Eo"N5aiIkJ4BrO+FJ's74aUW2c>LJ9QgEZE9[fR#H[Xrr4hRjO:SrG,*OQo]*EbSrJ99p&4:. -^8S$$QAg6HTotC_ELH.gg<6=BICe/#m)uW0PD,:crr4DCdD)H4L"c=`a-)"2J9>q:n,N@Le[C3_ -^>S>*];CF;l1`YtO-,crrg?$?S=cRSWi`M5]"H>crp.qDV4!KrEJUEr[BH3^Ng,p!S!g%fYGnCg -T:;74KnuV*WNXIt^T"31S>)L@QAU6hri#t&b3uM5J,~> -o`#0XQ?d.RC=`CXrr`5dq=a^X#P.6Ah:prSnbMeYji6<Gs*X^eS76L"rSWl_B4,B:s81'6??Olp -kbj/H>\i<ts8'mAH<=RmlhpeYbaWf_?,?77r:T0RP&"9(NPF*,fq*h.>@QXms8MN%Tk.;IdI[A; -oXpN1>@#qYrqlBKViGOu<-5k$Z=$^Xbja>pN*KGaiVEKOiLka1>F"XUs"!`PRr)P[i7t\PD5jp_ -B:%6Erp[^p@9KJfqu,0MEE[;BrTCV-?<UZD@qGOL3bN,AF*`26p!9XhC1LLJLVhd-kiC=+Iq`J+ -BObeoj5S[aL2U[5?]*IpioKLtl/L^YZ\rm:A7'B*ro+"?mJ=!cJ,~> -o`#0XQ?d.RC=`CXrri;^h9a+<_?[lg['-X=]"n-Y!k,,gli2A0bFN*_jo+,%G%Y2rl2UY*TO2lo -punZ2AR'$0rr;i<YBj;Z_s@7#q95@Q?=(MBs8;QOY**R)=H1)Ijk68YAm8d*s8W)f^7f+?Fj]g[ -s7EsjEEcc&qYpBbj/@uR>uc!\d'@(]H-Gd3[u=QoWo<dQrSaH$@9f)crr4M@\XRGDI,NeeB5X`W -EbLilp\sZtSmbg"j88f-YAm`bjo+ANE*c^S@:NmGAiaR<CNFfKX7af>JSJ_!<JSHFk31mW\pnF* -AnY[i_W0Y-Tn[Jt@UG#Eio9%do',/nh6`,^An57idf/5-jR)fHs*t~> -o`#0XZDF%TOkTg.rri;6GXNAF%fQn=$k3[@%K[(Cip6Vlqp`<?MWOfp[%s+OMs:9=fYE<!fD+RK -YEt#uiVrlRfZL+DHc,1Is7t*VUlBoEpAb'`jhS?rLj56#fB(\kXI4lrj8]/Yo$Y@AI>H;Brr;W3 -\Y+e/g%t^Fp#EcnSVqcK^<j<AFc+E4iQnfeGcp$$rr(fjX-/%/mf*5;oZ=b;N0iJ`c'<p^[>9=) -fD#:7e\@5mXQ03Vh8u@BLZSKt\W)?!NKKHlR/<:3R[p1NVo/2[a/b\qLj#!!g?.V[f".<;R$jD. -P0)bDf<h]QR?NDqfAbfNmIKN$in_;RTp_4(MphUa!p&bFY5a"~> -o`#0\SpbBcC8q('s8V]lq"=XY%.`iKfuLG"XLZ^>n+6GK"6[b[rp9Y=p:Z`"MX1<)Q?m4QA^gVB -[r,BTm/>M0IUZQ1kl:YD[?G'&OQ-0;s7sX)F';l'qu6UAn$/*h>B%aLq>TigP@e$<jo>AXd]\:. -=gIAms8V`'Rr2JHiVriV+7#tfA63'HjRh6#W5n/m\tE_>E7O^_s8LoOJ6uQaoD\bEn#qskCQ?fU -NHDegi5i[anbr@/Y'aSseG&t.`0FV+L["j6hQqZ;=^"s4>$P?@@V#IM->.(*HI]WtFCnucBufQ: -rr;umj0s>IAnPXcTDANWY`Ed9@UPDiq>U`q`g(a[A70WGW;hA~> -o`#0\T7(KdC9%.(rr_oSfZF-0%)KWdXe(W3Q'8&Q^;9]`"1Y&Urp9Y=p:Z`"MX1<)Q[3=RB%-_C -\8GNVm/>M1IUZT3kl:YD[?G'&OQ-0;s7sX)F';o(qu6UAn$/*h>B%aLq>TigP@e$=jo>AXe$"C/ -=gIAms8V`'Rr2JHiVriV+7#tfA63*IjRh6$W5n/m\tE_>E7O^_s8LoPJ6uQaoD\bEn$&$lCQHlV -NHMkhi5i[anbr@0Y'aSteG&t.`0FV+M!=s7hQqZ<=^"s4>$P?@@V#IM->.(*He#`uFCnucC<,Z; -rr;umj0sAJAnPXcT_\WXY`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~> -o`#0\[&KU_Q+HhcrrhtK@jhld%L<LP$OR1D$4IC>%Kd.J\,Pao0_W]"MONl2k-LqSP)Iuklcu,M -[d<tJ_5WZQP3DrFkg$Z$I@K6ns8VoA^7pF4gACmL-1Aj`R"U19l1t>I_7,hcM<4d;qqK5oML)_s -rr<#jah44$L#N%1ru^RG[$H5f\`ED<WN+#'n^"t>JVDYKs8W)W_Q&ZH[e'Lu1@N2lSX6>,e$G.J -h;HAhf(&_9fZC(LMq%M#maeq,FI27lptiE>I=$HqL51YFO->otrg>(&RAS]_]q_!ZJq:u.qu6Wp -puAo]R@'D.NjAK\n\MT+R?WN'nbN1jps-FGR?ieol)=W4~> -o`#0bY^gP%AUF"BrtYM!q=aIQn`o#X]W8'.Uo1&mdH'cfr:C*SaOC%Qs!@0?Lg[%Js6HG3Cgq%n -ouW_1FkQTeb+Eug>E%qKqSoF\>[52<rr35r]:3S@DrUcqru1.$M.9eIk5G>[n#qsd>`%bGs7Edj -C0PN+q>UBun?A-h>^,B1ruh="Vh8A[No'X3o&/HpqV830@9]8err<#sd%GYh?IeiMs$GtLMJI3l -WL\$Lh"gg9me6VZn[4^#D4p%Yf"HrE;.[o@s8McQa0:YNB4=qD<`r[6@:a%_B4Z"YTnR;p@9eiS -rVZ[/q:UdLB4b[`MXpf;Y`Ed9@UPDiq>U`q`g(a[A70WGW;hA~> -o`#0bY^pV&AUO(CrtYLoh9a*W^Ug\GQ&(ZkTr4WYVR=.Sr5&QGT?[9"s!@0?Lgd+Ks6HG3Cgq(o -ouWb3G1l]fb+O&h>E/"LqT#L]>[52<rr35r]:3S@E8plrru1.%M.9eIk5G>[n$&$e>`%bGs7Egk -C0PQ,q>UBun?A-h>^5H2ruh="W.SJ\O5Ba4o&/HpqV861@9f>frr<#sd%P_i?e+rNs$GtLMJI3l -WL\$Lh"gg9me6VZn[=d$D4p%Yf"HrE;.[o@s8McQa0:\OB4G%F='8d7@:a%_B4Z"YTnR;p@9noT -rVZ[/q:UdLB4b[aMt6o<Y`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~> -o`#0b]W7TkQC[U@rtG@EGXN>X%LijU$ORA5O/J%.$k<%C!t>X6qs=>/nA_\eY42JW[]>s`O3@4I -]n_Htq>/RTVNHG#m/Qq2`2AK?`Uj*/#PH6PSV;mZrr2p9l,KrlJskd"s8VQ,\<_`7lMpnVbe9O" -K\-&!rs%u3\=&&2kPkK(ro:quO+!JRqYp'Di:$O$aKUeVVX"0\s8CQbV2BfRq#::Ll,9itTWQ2I -TTe1,qXEqHrVuE4\t5=nk4.H[Z&!FLb4>T3pZ';uR#$3<G'/"VK8PhYrg=.\T"De@SXGUlSE9_I -rtG4]XJ2,NQB%[0s7*q4Tp_.$V"+9\#l)]UUm[O-Om/hEJ,~> -o`#3jbCF>>ASnsUq#CBd'DV7gjOV8SX/2Yr_q3baZ*MsCnGMn\kK)$Fm/JBsWH)@^pAaWdLi?m? -V;AUk=gIDnot?l=?X0]'s7*C\C0YK.qu6U"n?A-g>_D;?rs/PTUjlcWV"+Ha&F-<R@9]Mrs8M,[ -M.9eHkl1S]#4&4H@pFuZrr3`3dA)"m>f6.3s8DinrqXF(H<spup&=t,pq`M@>@ugls8W)RV1E2e -Dfg)5C;'TDs!%ElW.SVlHC1@VA6;lY^#f.ks8Mocj4)&ZZE0a]K6:j;@fBsHA8HgPF(f/o@'0"s -rtGCrV1reuA70`Ns7*=SEFrZfPO\JK#l)E)G@kAnGNl(+J,~> -o`#3jbCOD?AT#$Vq#;*$jOhPe[Ao^TLm4C4_q3baZ)=V2^\kqN\=^n<m/JBsWH)@_pAaWdLi?m@ -V;AUk=gIDnot?l=?X9c(s7*F]C0YN/qu6U"n?A-g>_MA@rs/PTV12lYV"+Ha&F-?S@9fVts8M,\ -M.9eHkl1S]#4&7I@pFuZrr3`3dA2(n>f6.3s8DinrqXF(H<st!p&=t,pq`PA>A)mms8W)RVL`;f -Dfg)5CVKcFs!%EmWIn_mHC:IYAQW#[^#f.ks8Mocj4)&ZZE0a]KQV!=@fBsHA8HjQF(f/o@BK+t -rtGCrV1reuA70cOs7*=SEFrZfPO\JK#l)E*G@kAnGj21,J,~> -o`#3jcDmA%R$u+pq#;'#L1;M>%1EUO$8Q4s_q3bg[V$!Xq[N];$_d@^s!?sKU4UDYs7!b+T9bhU -iQdg:[d="dbIs^4J@+nIn]AA4LP4I[rr32l`OM7fQ0J;J#QEPsWfVe7nc&P"lGg)kJ?JDAro_;* -P_,:drr2p%lbg&oK:M<-rtYLb_PW3<`Ua$.rVQQmq9ZpSNI].Drr3c/cG#s,KAc_.s8LonX-f*A -U8+-@b5M8<0`BeGXI#0H]>1J/H?G(Xjno)Xrql6GeA]#)XJ;/DLPLnSR$jA-RA@$\R[K:l[IX4p -'E77+Y+:uHN0N`0n\MT+R?WN'nbN1jps-FGR?ieol)=W4~> -o`#6qhi2JbBP;n\rqcX2rTs@QiQJ^2WMHN)cJe6bqt/mh\(g-:rU^3Ub0]qNs!Ia#U1@`equ?<% -MfWKKPI?KVHeJ5pn?A-r?!bbLs66G:A6jWHrr2p%l`,nQ?(CB_ru1aRT6O[J_=mp/rn!uq?!YVI -s8C?>I:6K`nbrIlk,*c>?)7#irs/;5So@qLh#%!K#P"s\DHgE%r;Q^#o!Oiu>B]0.rs\eJTm:$G -@q]FcB8?0Xs"O5]RWMk;>[1HHEJ1:2jQkXVf\"]ol1a`6kMtCKbe^K:DeN`p@V0q-C1_'eA@D7/ -rt=e+P]:;G?Ztc8nZ\'oAn#/3nbN1jpr8SCAn5:nl)=W4~> -o`#6qhi;SdBP;n\rqcX2rT2eVZ_ES<PaA5XcJe6bqt/mhXKK+KrPAZITum)ss!Ia#UL[lgqu?<& -N,rTLPdc]YI+e>qn?A-r?!khMs66J;A6s`Jrr2p%l`,nQ?(CB_ru1aRT6O[K_Y4$0rn+)s?!b\J -s8C?>I:6NanbrIlk,3i??DR,jrs/;5So@qMh#%!K#P"s\DHgH&r;Q^#o!Oiu>Bf6/rs\eJU3U-H -@qfLdB8?0Xs"O5]RWMk;?!UZLEJ1:2jQkXVg"Fosl1a`6kMtCKbe^K;DeN`p@V0q-C1_'eA[_@0 -rt=e,P]:;G?[(i9nZ\'oAn#/3nbN1jpr8VDAn5:ol)=W4~> -o`#6qhl337R[Kr<rqcX1rOd/&%1ERN(Jp@-cJe6cqt/mhBabIK%Kd.JT_RpS-N;o=Q%@Zds7F@; -TpVIXag?_[g%k[;`jhY!JBmohl,BilL6Ca!rr32g_m>PYW:0`c)Z%jrV2^#FpAb0lh8?4MJ'@Ze -rRercObC(2rVm)a`3#/RY4;Mk#PZKWT883VqtpBun\qu/Lk"4Xrr32na1@^nNTU6?%/\PiV2p+[ -Ng,rtV=jcd0_il(UQ'_NI<pEsOK-@^n)i]kj5ASXp[RS4j5&80_69B$S!f\.OI;f4R@07s^A%L( -'(<]HTp_1&OmE&;_6fo(P_c.*q>U`qcFKa=Q].'kW;hA~> -o`#6sm&bA@AnZ4XqYL4/o^_[uY,e@pZGkP^oAlm+n,)qIb.c]qnc&._lHdfNmJeL0bFE$\j8T)R -d>r?]DM3^N?+fV)s6HVBB3Sj$rVkNCIUccGm/I"iro']*?X'c,rr3o/\XRSB?/#2Us8'd/F'N>5 -r;ZQ,R<N(I[.aM!#Q<)DHsU*ip&=srn["Qp>^,?0qu6oeV28knEo[/urs%npP@RmUli-nnp:Zu8 ->$@)HDJ!EsdJj+E(\4npDI@4VWi`_GcJS-cftXqsXe:!`qu6U*rr)WambP(/EFrcg@#Aq&AclRU -U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g(a[AR]oKW;hA~> -o`#6sm&bDAAnZ7YqYL4/o\[]`MhmXjZGkP^oAlp-n,)qIb-/"Z^])(P\u!F@mJeL0bFN*]j8T)R -d?&E^DM3aO?+fV)s6HYCB3Sm%rVkNDIUccHm/I"iro'`+?X0i-rr3o/\sm\C?J>;Vs8'd/F'N>5 -r;ZQ,R<N(J[.aM!#Q<)EHsU-jp&=srn[+Wq>^5E1qu6oeVMStoF6!9!rs%npP@RmUli-nnp:Zu8 ->$@)HDJ!EtdJj+E(\4qqDI@7WWi`_GcJS-cftXqsXe:$aqu6U*rr)WambP+1EFrcg@#Aq&AclRV -U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g1g\AR]rLW;hA~> -o`#6sm'rdWR@Bk\qYL4.oOf9T$48nBZGkP^oBO;snb`.Kb#AfZr=/o=%$LAPs!@Ql]oS!0rr;cB -[%`t\XKIS0^@)"#lbg&sLk4C\rnbDhP_bsurr36&j27pYJ%5.Mru1OP]V((0gACpMqU30RLP"@[ -s7jjNUlgAEpAY'srRnubNe"q<rr35na1@[mNop?<rs.l(Z'pW1j8T&X#4BF=Q%>Fjrr3H$bIsO& -H'jtfR?j2mrr)j5o#.u.N.\"-XgZ'khsgC!eBZ.V^S]QYrr3`4rV6$Qh7C%fR@&tgR[ok6R?iuB -p\On&n&Mu4R?N>dlMpCj[%WnPLnsS:rs8DF\YPX[Ng&_+s*t~> -oD]-ke:VIHBQ8U'qu$I:rTWITVkg?,e)^&okeDar]C5b!rThG=gZ\2"o^'uIp$Mc*p:Z`#M<b-@ -rS<QWAnZ$h=G#B*s8V5ZK4J5,jSo&"Q[*(NPOSSO#Q<&EH<ab,q>UC4n$&$i?#\g&s8V`&S8)8O -jo5;PZ]K6:A%;=5rs/A=T64CFg%t^J#4&=M@pFuZqYpcaU5*JnGNf#*#3i+C@9ou)rr3GsYa/m* -FiV=FB4bkDq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)SS`q>Ufm^R]IY@olp:Ir>6t!b[5Xqu7?/ -k-U(`Amef#m/QU[O)\c@@$C-Vrs8D=Q$-bOA9[::s*t~> -oD]-ke:_OIBQA^*qu$I:rSk;MPaSMbe)^&okeMjt]C5b!rThG+Y.;<a_Rl\Wp$Mc*p:Z`#MX(6A -rS<TXAnZ$h=G#B*s8V5[K4J5,jSo&"R!E1OPjn\P#Q<&FH<ae-q>UC4n$/*j?#em's8V`&S8)8P -jo5;PZ]K6:A%;=5rs/A>T64CGg%t^J#4&=M@pFuZqYpcaUPESoGj,,+#3i+C@:$&*rr3GsZ'K!, -G/qFHB4bnEq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)\Yaq>Ufm^R]IY@ols;J8Y?u!b[8Yqu7?/ -k-^.aAmef$m/QU[O)\c@@$C-Vrs8D>Q$-bOA9d@;s*t~> -oD]-ke>&FuR\?e"qu$I3rNm"@+BkGPe)^&omF&)'_XIL(rThEe$k<1G!t>ZQp$Mc*p<0t'Rd0qQ -rS=fSR@Bb/I$*7]s8V6#Xd+TsjSo&*\tt[NV==Ka#Q<;kVM]lSq>UC4n&Dl+LPb$is8V`6]pj_8 -jo5;P`3c8%M88ocrs/AH^S?[:g%t^J#4'78Q%PUnqYpca]W[fdP3DlE#3j.3P(C"1rr3Gs`jqIi -M9!H.R@0DFq#14/n\DN(Oc\#NjQZ+*qu6<6^TXQ5Tps$rq>Ufmcb?0BP_4CfTUu.N!g]SOqu7?/ -kKU<'R?2ogm/QUl[%WnPLnsS:rs8DF\>5O[PEtI3s*t~> -oD]3skbrH1ASZOGVsOE^ruh3s_Psrbh<an5ikpgsNPF3?rr<#qkeY$ekje<3d)>MBs!@0?M.*4L -s8W)ZQ?m4V@TQdJnG`Idd\;/!>_MAAq9"eAAS-kirr35u`hIN\CuG9krs%_dLh'b>l2L\om]Vgb ->`7qJs73CMEFWXdp\t1)oYR8@?>SU"s8W)WVh8D`V"+<]#3hh8Cgq>Hrr36&goH!5?c2X;rsn@p -N+6(Lk2;MDBOu/=rr2p%nZ@^h@Vk9*rri>h\rUh0Acl_$li-e]')U1eNc&E6<-H<EEFrfrAoc)n -r;RH,bc6,*A6N-Ao)J6aO)\c@@$C-VrsAJ=OEG/JA9?`.WW.J~> -oD]3skbrK2ASZOHW9jN_ruh3o[%t+Oh<an5il$q!Nka<@rr<#qkeXC'\\H"nVRQ-`s!@0?M.3:M -s8W)ZQ[3=W@TQdJnG`Idd\D5">_VGBq9"hBAS6tkrr35u`hRT]D;bBlrs%_dLh'e@l2L\om]Vgb ->`A"Ks73CNEFW[fp\t1)oYR8@?>\[#s8W)WW.SMbV"+<]#3hk9CgqAIrr36&goQ'6?c2X;rsn@p -N+6(Lk2;MDBOu2>rr2p%nZIdi@Vt?+rri>h\rUh0Acl_$li-e]')U4fNc&E6<HlKGEFrfrAol/o -r;RH,c)Z;,A6N0Bo)J6aO)\c@@$C-VrsAJ=O`b8KA9Hf/WW.J~> -oD]3skd-eER%:(W_XRR(ruh3V>_of0h<an5l.*2,SA3eNrr<#qkeTIl%1WjW$tf(ts!@0SZ%oLO -s8W)ZZDO(YP_"%onG`IdftjYOKU:s'q9cUFR$496rr35udD;Q7LuA72rs%`,Ya'p*l2L\om`)`% -Jt20,s73t0TTtVPp\t1)oZk7FMMU6js8W)Y`3#2SY4;Ag#3i_%SWf6#rr36&hoMjZK#m]crsnA4 -Z]p$0k2<83R[9K&rr2p%n\;?&PEP/,rri>ja0_K<R0/nXmf*+`')US3Z_!MAH&BY@TUD4:R%Dn- -r;RH,fZ0t[Q\^!uo)J6r[%WnPLnsS:rsAJF[A0.XQ_!.8WW.J~> -o)Bg*dtqgLAnlF@S]^I$s82'2fB2Z"kL6u'D0r;*jnJcQrsJYc_8"[ena+Z@na6>[lE,>?]Cl1' --L%4TCLpdPK&6D)s7jL(H!t'Mn,N:<N,WB>GO5A0rpIXpE+4(Trr36&gSB=->`J.Mru1+#LLXkt -nc/X]]7k-6BpJ>js8M,mP\afRkPkJdrR%Bf?<t/8qYqf)RXT$_DT;YTs8(!>H=1:<qu?]qiMM68 ->cdMc]Qe%$C6\Mmrs/(sK5P7<\,H:*55jQB]74L*AnZ")S^HX!rqc!<cF9']AR88;ZerB<A7]Cg -DMZI5s8W)mf!pl_ARAAEfD5I:Y`Ed9@UPDiq>Us#c&-IPB4u1McIg^bb5JLCJ,~> -o)Bg*du%mMAnlFAT$$R%s82'2fB2Z"kL@&)DLAJ,jnJcQrsJYc_6'iM^UpANna6>[lE,>@]Cl1' --L%7UCLpdPK&6D)s7jL(H!t'Nn,N:<NGrK?GjPJ1rpIXpE+4(Trr36&gSB=->`S4Nru1+#LLXkt -nc/X]]7k-6C6nMls8M,mP\afRkPkJdrR%Eg?=(59qYqf)Rso-`DT;YTs8(!>H=1==qu?]qiMV<9 -?**Vd]Qn+%C6\Mmrs/(sK5P7<\,H:*55jQB]7=R+AnZ")T$lg#rqc!<cFB-^AR88;ZerB=A7]Cg -DMZI5s8W)mf!pl_ARAAFfD5I:Y`Ed9@UPDiq>Us#c&6OQB4u1NcIgacbPeUDJ,~> -o)Bg*e"E%mR%0kP^=i/Xs82'2fB2Z"mGQ<uP`W&jjnJcQrsJYc_*8>;%LihXna6>[lGocU_=dg- --L%t?SX5:\Ol$!8s7jpTV36P3n,N:<Z_*YOSF$:Urp\=LT9#/urr36&hSQ:UJtDB/ru1+@YEb!S -nc/X]`NGf"R'-)]s8M92\=J\DkPkJdrReucNe"q<qYqf)[],gaR*bg3s8(?dViZ_hqu?]qj2A$\ -J@+n:_5*KeR^)Yers/)/XIbfI`r5l955jcd_Q'&lR@9\C^#&/Trql3IgsER+R#ZK:\)4upQC+)0 -T<HoFs8W)niR#$+R#ZK?fD5I:_6fo(P_c.*q>Us#d^#L4R@BhYgZ%2BgAS2SJ,~> -o)Ba/m(IUQ@qB=nJ![1Jce7C<f@J6]Vg;umQbhDFr;-F"qrY`0g$%bO`:<9q#6*J_F)'D)rr4>5 -W.f+u<a*6,rr<#i^n5aYBXIF3ro&]MAnPt[p&*jhVh8bsIHgb2-2YoZH='sZo)Jagd@G\sD6rp8 -s7k,rBP(q$_Ya,_]:+%ZAprqCrs/;6Soe1Bg%tRFEU03?BP2(>lM^"mYDdF1DqY-is8CB@HsL(& -p\NU&D.[I&_>XE6oYc)fAncbIrVui^c'`OhJ7iA'B4u::SZ]T?_S<LQLiHp0:fES5o@f+9@:a(g -H'PYSbKe,8P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]JnS_-BPrBkWhXj:p9+FG~> -o)Ba/m(IXR@qB=nJ![4Ld+[R>f[e?_W-W)oR).MGr;-F"qrY_sXgu'C\+/nd#6*J`F)0J*rr4>5 -W.f+u<a*6,rr<#i^n5aYBXIF3ro&`NAnQ"\p&*jiVh8bsId-k3-2YoZH='sZo)Jagd@PbtDR9$9 -s7k,sBP(q%_Ya,_]UF.[Aq'"Drs/;6Soe1Cg%tRFEU06@BP2(?lM^"mYDdF1E7t6js8CBAHsL+' -p\NU&DJ!R'_YsN7oYl2hAnceKrVui^cC/akJS/J(B4u::T!,fC_nWURLiHp0:fES5o@f.:@:a(g -H'Y_Tbg4;:P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]K4nh.BPrBkWhXj:p9+FG~> -o)Ba/m(f'QPaIr5Wk-3th;mk`iSiSA`MSQHT>B7Nr;-F"qrY^Z$k3XSAb#3g#6*T(U6+()rr4>5 -]<.ZgJ9Sfurr<#ic+g$<OM1;dro'oKR$jP^p\a=.`N>\rT'?7S-2Z3-VN6;8o)JagfY4>OR)&Cp -s7k-ER[BS?dJNb#d_)KIQ(I7>rs/;D^8$O7g%tRFEU0s,R[KYMmeuV/ag.P'QJDK>s8CWfVi6/O -p\NUASXGq?dJa+FoZ="uR%()6rVuicgq/okT9bb0R@BkN^<+gRf@8*^Yb78=GB9;0o@fq'P*_T. -VRXe#gYLQ.\"oCPHul1Jrr;N)[%WnPLnsS:rsnq]W0s!?R\$Rn`knUap9+FG~> -nc'R)iM^Kt?t<kbFFfLGWNrn2QuunCBp6-WlhUPTrs8Ma_8"[bf>[7Ks(;9#lH6&KFN!>@s8VZ# -MJQNsK&6D(o^(GHP&OuPU>PtMl(Ds(AT*="XcddEAS,Ll[+3%=oXpK)>?o)?s8Vr8NH&QBIE]p? -q;R?H@V9bCWMY2mBP(geDm\'3d-e,uA6Na,rqcY7o"B-RA8?UbXdaBWB4YXiRa]EmoY-W)=^g.b -rp-Y+@qKV2^>dMmfnj<LAp9TQaMOii?&[14CgCFYAS>n&J;9&@Km[`H>uXU'PgK""m_s9V?".A\ -G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXB3\hR@qB=iA7:epY5a"~> -nc'R)iM^Kt?t<kbFFfLGWj9"4R<E(FC6Q6XlhUPTrs8Ma_6'iJX0hBcs(;9#lH6)LFN!>@s8VZ$ -MelWtK&6D(o^(JIP&OuPU>PtMl(Ds(AT*@$Y**pHAS,Ll[+<.@oXpK)>?o)?s8Vr8NH&QBIEg!A -q;RBJ@V9bDWMb8oBkCpfDm\*5d-e0!A6Nd-rqcY7o"B0SA8?UcY+0QZB4YXiS(#QpoY-W)=^p4c -rp-\,@qKV2^>dMmfnsENAp9WRaMXrk?B!:5CgCFYAS>n&J;9&@Km[`H>uXX(Q-f+#m_s<W?".A\ -G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXBO"qS@qB=iA7:epY5a"~> -nc'R)iNJ<#OHu<*UT:f<`lu]J];(@6JXa7"lhUPTrs8Ma_*8>;$r-6\s(;9'maoFRT$Qg's8VZ- -Z(6brOl$!7p@74k\"B%Y\E<ejl*-V?R%LS"agRq4QC+&1a5PS)oZOe8LjmD=s8VrAZ_<bSVqKhH -q;S9;PF8/P`l+mNQ'[l*S]B^>h<r7hQ\C.PrqcX&o#%)_QCY"hah=C>rg7/a\DQ#goZXk7Kn/"X -rp.%bQ'n5Fd-9EIfqXaoRAILAf[[p/JXOolOc#3bR$sS@Wir\4Y,IqVMgf_kSC$j*m_tEKN0BX" -Uoq8B^:()5P_j[*Q.,F+s7*h'Q&poVU[e0[%fYUjOc,9aQ'[r1Q&;L1Y5a"~> -nc'L+p",mS?!CTA?t!MS@pr\J=&s:,]$fg9rUp0qqrY`/eBP_pnc)Gai3TGCAR/\cG-UrEpW.Sa -:gh?5rqO73TQadJ>$Z,lPPXprG@4QW>$G08OFL_B=^#BOBs$TcB3S;>h#%-Oq9*kc=]o$FBP6f& -^2mU`r`Tq;CS5cU=]np>C2'g1M.KgeFQ`K"55O#m@p3&?>$>'WQ=jB(=^c&ZNT?L@>>]7urr;`B -JRDVb>\S1mVWGI1?<^]DBP:jZBq*B3fqN.d>?bE@rEq6b?!C?/;-%Y9dd[58qr>,4?<^T=?X[DR -@UNJD<)HhTbjYN1s7)^m>$"^$O7E#F"nKol?WgM1=Thf*;NL@Ns*t~> -nc'L+p",pU?!CTA?t!MS@pr\J=''C.]$fg9rUp0qqrY_rWM?N]nc)GaiO#VEAR/\dGI%,GpW7\c -:gqE6rqO:5TQadJ>$Z,mPPXprG[OZX>$G08OFLbC=^#BOBs$TcB3S;?h#%-Oq9*nd=]o$FBP?l' -^2mXar`Tq;CnPoW=]np>C2'g1MIfpfFm&T#55O#nA6N/@>$G-YQ=sH)=^c&[NoZXB>>];!rr;`B -Jmhed>\S4oVrbR3?<^]DBP:m[C7EK4fqN1e>?bE@rEq6b?!C?/;HIk<dd[58qr>,5?X-c??X[DR -@UNJD<)HhUbjYN1s7)an>$"^$OR`,G"nKol?WpS2=Thf*;NUFOs*t~> -nc'L+p"-."K85AFOHG`kQ'.)ZH$+e2]$fg9rUp0qqrY^Z$k+u[nc*5"kKV#QQ].!!UW332pW]Ol -GC.C"rqOsb^nm-KLl@n"ZMO4<QAC6NLk^D*R$!;]L51hRO1shcQA'R/h#%-Oq9YalL4tJJP)Sku -^lsS.Lkp_3Jte9^L5(JEPE3H<Y*4EZMWag855O$,MhHkAL4OW0S;i;YL5_=YW8t@QKQVt/rr;`B -S;W,XMjBou]&gYfKnbMJR@&t_J>(6Pfr9aYKo(eMrK&XlN/3%2F*3/;dd[58qr>2JJqSo;O-,Wj -PE:]UHZF=pbjYN1s7*LXJ9uQ_TCM^V"nKp)Jpr4KJHUIKF.`!*s*t~> -nGa:'o@UL#@Tc`5=&r:!<*O-jVSC^HpAOR^#5dQ!\[\s2nc&ag`,8sbrDsP4R.UFUgM'bkOQ-0; -mYPO[qc>FQG45Cl\:.[a='g0Qa1$"i='KBoY1hojD.[F1jo5;[qr!`H='&mRNP4]TiO!b,<tf%s -]Zd<l='&U?LT]@gI;<G.R-aYK+TCiPO^M6l>Ap1P`IV;r=(lrVd,:%)An[7ks8W&_]Qa?V)J"5b -dI?,&I:$&S='K[-]%6?Io@LF+AQW&8r`9J.<)cdtAq$SmhXpdGrtP7f_j,4H='&F(=&r:!<F0sM -cL(T0rrVc"K`65uJ$AM=rrr>daJ+0"rFQ.II^&CGs*t~> -nG`^lo@UL#@p8k5$s$>+<Ej6lVSC^HpAOR^#5dQ!Vim_=nc&ag`,B'erE'V6R.UFUgM0knOQ-0; -mYPR]qcGLSGOPLm\:.^c=C6BTa1$"j=BoTrYM/#lDJ*X5jo5;[qr!`I=BK*VNP4]TiO!e-=;,2! -]Zd<m=BJgCLTfFhIV`Y2R-aYK+TCiPO^V?o>]?@R`IV>t=D</Yd,:(*B5*Ins8W&_]QjEX)J+;d -dI?,&IUH8V=Boj/]%6?Io@LF+Am&5:r`9J.<)lk!B7HbohXpdGrtP7f_j,7J='&F(=&r:"<F:'P -cL(T0rrVc"K`65uJ$AM=rrr>daJ+3$rFZ4JJ$ALHs*t~> -nG`[ko@UL4J,Xa'H[9mXFEi=sW5$pJpAOR^#5dQ!57013nc&agc]s*,rH8`sWV$5fgQ-Q%S)X>F -m\bqiqfXW:O73&0\rV,[G']"Ia1@.PG'JS&ZJ+?3LOO]6jo5;[qr"5uG'87gR(r"aiO4XCFq]7c -]ZdR7G'8+]Pd9$#RY6-?V!RpW:&aV(S:#L'G_;d/`KY^mG(5INd,:gXIXdpSs8W&_^5[>[G(,FI -eF;G+NdGqjG'J\/]%6?Io@LF7IsH<cH@(!bGBItMIZ12@hXpdGrtP7f_juO.G^4U^H[9jVFaAnF -cL(T0rrVc+Q2ZR@Nk"ZTrrr>daJY#JrI+j!Nk"Y_s*t~> -n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!ZG#VprrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL= -b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8 -akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e -YeS]Op\t3lp>sQ-SrS-pGmK4fX16=.meZq]rs/Q"m+&kSOb<RW#)SnWa5?IdrVlroim%JA!mTa" -p\tBnn(c("rO;sCb2W3!s*t~> -n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!VmYm]rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL= -b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8 -akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e -YeS]Op\t3lp>sQ-Sr\3rGmSeROK5n6h<t.=rVm-%qWubIYE=M:GmAYPS[6Aoo)8Oe!r1d"rl"r` -iqW9J"T.ZCb.dha"22k:poaXI~> -n,EUkpZ'?$SW*N'#`tOY]Zo="q#9a^"oIH!@u'F@rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL= -b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8 -akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&KLm -YeS]Op\t3lp>sQ-U6^Z7L^Ap$R&da>h<t.=rVm-%qWubIYF1IML^/d#TsMeso)8Oe!r1d"rl"r` -iqW9J"T.ZCb.dha"22k:poaXI~> -mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^ -qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[ -l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i -"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j" -lKn'9rN?0N~> -mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^ -qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[ -l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i -"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j" -lKn'9rN?0N~> -mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^ -qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[ -l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i -"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j" -lKn'9rN?0N~> -li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~> -li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~> -li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -JcC<$JcFs6J,~> -%%EndData -showpage -%%Trailer -end -%%EOF diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt deleted file mode 100644 index a0c0c63e0..000000000 --- a/docs/draknet_advanced_doc.txt +++ /dev/null @@ -1,165 +0,0 @@ -This document details the entry points you can call without the DrakX graohical -toolkit. First, the general variables you will encounter further. If you don't -know wht a variable is, look here. Any additional locally variables are -commented 'in place' - ------------------------------- -Special types (in upper cases) ------------------------------- - DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2 - ---------------------------------------------------------------------------------------- -Summary of common variables used (local variables are described in the function itself) ---------------------------------------------------------------------------------------- -notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive - $prefix : prefix path (empty in post-install) : string : path - $isLaptop : flag for laptop : boolean or int : guess - $isdn : hash table containing isdn infos - $isdn->{login} : cnx login : string - $isdn->{passwd} : cnx passwd : string - $isdn->{phone_in} : user phone : /^[0-9]*$/ - $isdn->{phone_out} : ISP phone : /^[0-9]*$/ - $isdn->{dialing_mode} : dialing mode : "auto" or "manual" - $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ... - $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/ - $isdn->{irq} : irq of the ISA card : integer | - $isdn->{mem} : mem of the ISA card : string | - $isdn->{io} : io of the ISA card : string | see netconnect_consts for examples. - $isdn->{io0} : io0 of the ISA card : string | - $isdn->{io1} : i01 of the ISA card : string | - $isdn->{idl} : amount of time after the cnx times out in secs : int - $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion. - $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia" - $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world - $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer - $isdn->{description} : card description from pcitable : string - $isdn->{vendor} : card vendor : integer - $isdn->{passwd2} : passwd verification : string - $modem : hash table containing modem infos - $modem->{device} : device of the modem : string : /ttyS[0-9]/ - $adsl : hash table containing modem infos - $adsl->{login} : cnx login : string - $adsl->{passwd} : cnx passwd : string - $adsl->{atboot} : - $netc : hash table containing system-wide networking infos (maybe not true, correct this) : - $netc->{NET_DEVICE} - $netc->{dnsServer2} - $netc->{dnsServer3} - $netc->{DOMAINNAME2} - $netc->{NET_INTERFACE} is set to "ppp0" - $in : interactive object - ------------- -Entry points ------------- - -isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now -input : - $prefix - $isdn -$isdn input: - $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode} - $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1} - -write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login -input : - $a : login : string : /^.*$/ - $b : passwd : string : /^.*$/ - -connect_backend : launch the cnx script -input : $prefix - -connect_backend : launch the cnx script -input : $prefix - -read_providers_backend : build the tree of isdn ISP -input : - $file : 1st location of the file : ISDN_DB_FILE - $file2 : 2nd location of the file : ISDN_DB_FILE -output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name - -get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc -input : - $isdn - $netc - $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name - $file : 1st location of the file : ISDN_DB_FILE - $file2 : 2nd location of the file : ISDN_DB_FILE -$isdn ouput - $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}, -$netc output - $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3} - -isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card -input - $isdn -$isdn output: - $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type} - -isdn_get_list : return isdn cards descriptions list. This function is not use internally. -output : descriptions : list of strings - -isdn_get_info : return isdn card infos. This function is not use internally. -input : the description of the card (see isdn_get_list) -output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,) - -conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times. -input - $prefix - $netc - $intf - $type : type of interface, must be given if $interface is : string : "static" or "dhcp" - $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards - $ipadr : facultative, ip address of the interface : string - $netadr : facultative, netaddress of the interface : string -when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned. -$intf output: $device is the result of - $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;; - $intf->{$device}->{BOOTPROTO} : $type - $intf->{$device}->{NETMASK} : '255.255.255.0' - $intf->{$device}->{NETWORK} : $netadr - $intf->{$device}->{ONBOOT} : "yes" -$netc output: - $netc->{nb_cards} : nb of ethernet cards - $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device -output: - $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call. - $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/ - -adsl_conf_backend : write adsl configuration -input : - $prefix - $adsl - $netc - $adsl_type : type of cnx : string : "pptp" or "pppoe" -$adsl input: - $adsl->{login}, $adsl->{passwd}, $adsl->{atboot} -$netc input: - $netc->{NET_DEVICE} - $netc->{dnsServer2} - $netc->{dnsServer3} - $netc->{DOMAINNAME2} -$netc output: - $netc->{NET_INTERFACE} is set to "ppp0" - -modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card -input - $modem - $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ ) -output: - $modem->{device} : device where the modem were detected - -get_net_device : return the device choosen for the net cnx -no input -output : name of the internet device. - -read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type` -input: - $prefix - $netcnx - $netc - -set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type` - $prefix - $netcnx - $netc : useless! REMOVE ME diff --git a/docs/interactive/ask_from b/docs/interactive/ask_from deleted file mode 100755 index dad69247e..000000000 --- a/docs/interactive/ask_from +++ /dev/null @@ -1,29 +0,0 @@ -#!/usr/bin/perl -# Yves Duret <yduret at mandrakesoft.com> -# license: GPL - -use lib qw(/usr/lib/libDrakX); -use interactive; - -my $irq=1; -my $login; -my $login2="editable"; -my $check; -my $range=57; - -my $in = 'interactive'->vnew(undef, 'default'); - -$in->ask_from("window title - ask_from", - "message\nexamples of utilisation of ask_from", - [ - { label => "enter scalar", val => \$irq }, - { label => "combo (type=>combo optionnal)", val => \$login, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], type => 'combo'}, - { label => "choose from list editable and sorted", val => \$login2, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], not_edit => 0, sort => 1}, - { label => "check box", val => \$check, type => "bool", text => "text" }, - { label => "range", val => \$range, type => 'range', min => 0, max => 100 }, - ], - complete => sub { print "complete\n";print "$irq\n$login\n$range\n"; }, -# focus_out => sub { print "focus_out\n"}, -# changed => sub { print "changed\n"; }, - ) or $in->exit(0); -$in->exit(0); diff --git a/docs/interactive/ask_from_list b/docs/interactive/ask_from_list deleted file mode 100755 index 63c0ee996..000000000 --- a/docs/interactive/ask_from_list +++ /dev/null @@ -1,27 +0,0 @@ -#!/usr/bin/perl -# Yves Duret <yduret at mandrakesoft.com> -# license: GPL - -use lib qw(/usr/lib/libDrakX); -use common; -use interactive; - -my %l = ( - 0 => "Welcome To Crackers", - 1 => "Poor", - 2 => "Low", - 3 => "Medium", - 4 => "High", - 5 => "Paranoid", - ); - -my $in = 'interactive'->vnew(undef, 'default'); - -my $level = $in->ask_from_list("window title - ask_from_list", - "radio button\nexamples of utilisation of ask_from_list", - [ values %l ], $l{2} - ) or $in->exit(0); - -print "$level\n"; -$in->exit(0); - diff --git a/docs/interactive/ask_from_listf b/docs/interactive/ask_from_listf deleted file mode 100755 index 077540b49..000000000 --- a/docs/interactive/ask_from_listf +++ /dev/null @@ -1,27 +0,0 @@ -#!/usr/bin/perl -# Yves Duret <yduret at mandrakesoft.com> -# license: GPL - -use lib qw(/usr/lib/libDrakX); -use interactive; -use Data::Dumper; - -my $in = 'interactive'->vnew(undef, 'default'); - -my @m=( - { description => "dhcpcd", - c => 1}, - { description => "dhcpxd", - c => 3}, - { description => "dhcp-client", - c => 4}, - ); -my $f = $in->ask_from_listf(_("ask_from_listf"), - _("Which dhcp client do you want to use?\nDefault is dhcpcd"), - sub { $_[0]{description} }, - \@m ); - -print Data::Dumper->Dump([$f],['f']) . "\n"; - -$in->exit(0); - diff --git a/docs/interactive/ask_from_treelist b/docs/interactive/ask_from_treelist deleted file mode 100755 index ade7141d4..000000000 --- a/docs/interactive/ask_from_treelist +++ /dev/null @@ -1,27 +0,0 @@ -#!/usr/bin/perl -# Yves Duret <yduret at mandrakesoft.com> -# license: GPL - -use lib qw(/usr/lib/libDrakX); -use common; -use interactive; - -my $in = 'interactive'->vnew(undef, 'default'); -my $foo = $in->ask_from_treelist("window title - ask_from_treelist", - "message\nexamples of utilisation of ask_from_treelist", - '|', - ['Custom', - 'Other|Unlisted', - 'Matrox|Millennium II=>Matrox Millennium II', - 'Matrox|Millennium G200=>Matrox Millennium G200', - 'Matrox|Millennium G400=>Matrox Millennium G400', - 'Matrox|Millennium G450=>Matrox Millennium G450', - 'Matrox|Millennium G550=>Matrox Millennium G550', - 'Sun|FFB 67MHz Creator=>Sun FFB 67MHz Creator', - 'Sun|FFB 67MHz Creator 3D=>Sun FFB 67MHz Creator 3D', - 'Sun|FFB 75MHz Creator 3D=>Sun FFB 75MHz Creator 3D', - ], - 'Custom' - ) or $in->exit(0); -print "$foo\n"; -$in->exit(0); diff --git a/docs/interactive/wait_message b/docs/interactive/wait_message deleted file mode 100755 index 0caec4471..000000000 --- a/docs/interactive/wait_message +++ /dev/null @@ -1,13 +0,0 @@ -#!/usr/bin/perl -# Yves Duret <yduret at mandrakesoft.com> -# license: GPL - -use lib qw(/usr/lib/libDrakX); -use interactive; - -my $in = 'interactive'->vnew(undef, 'default'); -my $wait = $in->wait_message('wainting title', _("Moving files to the new partition")); -sleep(3); -$wait->set(_("Removing")); -sleep(3); -$in->exit(0); diff --git a/docs/mdk-9.2 b/docs/mdk-9.2 deleted file mode 100644 index 1d5a06494..000000000 --- a/docs/mdk-9.2 +++ /dev/null @@ -1,129 +0,0 @@ --*- outline -*- - - todo list for mdk9.2 - (mainly gtk+ oriented for now) - -* erratas -** put them in gi/perl-install/patch/mdk_9.1 -** move mdk9.1 ones from gi/perl-install/patch into gi/perl-install/patch/mdk_9.0 - - -* libDrakX -** document internals through docbook like kernel-2.5.x does - -* mcc vs tools communication -** faster tools embedding in mcc (gc idea) - move gui into gui/<sg>.pm so that mcc can just do require on them - instead of doing slow fork+perl startup (same idea as fast_cgi, - perl_mod and the like) -** told apps to ask user whether to save their changes or to discard them on cancel (#1437) -** to let diskdrake fit better when embedded, we should write "formated - mounted" rather than "formated\nmounted" -** "testing mode" option in options menu so that we pass --testing to our tools ? - -* ugtk2 & tools guies: -** cleanups: -*** $o->flush() should be sub { $_[0]->window->process_updates(1) } - see logdrake::parse_file()'s progress bar as an example -** saner/cleaner usage of gtk+-2.2 widgets: -*** use MessageDialog for modal windows (cleaner) - especially for wait/error messages so that one uses std gtk+ icons for info/error/warning and the like events -*** use button boxes everywhere when we have several buttons for saner gui (as per gnome specs/recommendations) -*** gtk::combo => gtk::optionMenu (as per gtk+-2 doc) -*** use size::group to let things be smoother in some places (eg: clock.pl from mcc) - -* tools -** all: -*** provide menu entries for more gui tools (?): for now, only harddrake2 and logdrake have one -*** explanations of std standalone.pm functions are broken due to common.pm overloading -*** have a button or a menu to access help (was already part of mdk9.1 specs) - only harddrake2, mcc and rpmdrake have one for now - policy might be: "most users access tools via the mcc, so let handle help, bug reports and co only in mcc" -*** rename and provide compatibility links: -**** adduserdrake => drakeuseradd -**** diskdrake => drakdisk -**** harddrake => drakhw -**** keyboarddrake => drakkeyboard -**** localedrake => draklocale -**** logdrake => draklog -**** menudrake => drakmenu [fredc] -**** mousedrake => drakmouse -**** printerdrake => drakprinter -**** userdrake => drakuser [deush] -**** XFdrake => drakx11 -** drakboot: -*** should prevent the user to insert a space in a kernel label (#2826) -*** fix "Display theme under console" setting from current theme config file (#2662) -** drakconnect -*** does not show up zeroconf as a valid mode in "configuring lan" window in embedded mode -** drakedm: -*** restart dm service ? -** harddrake: -*** colorize the internal help -*** add raw description (or join('|', vendor, descr)) for mass medias (see drakx bug #3???) -*** use pure gtk+ instead of interactive for "fields description" or alter interactive so that it creates modal windows -** logdrake: -*** search field does not get focus when embedded -*** we may disable the search button when one deselect all explanation files -** mcc: -*** make tool names be black or blue (like in rpmdrake & harddrake2 guies) (#2695) -*** hide non executable programs instead of warning at runtime if program isn't executable -*** make more program being options rather than depandancies (ie like rpmdrake and drakwizard) -*** add scrollbars if root window is below 800x600 (#2961) -*** add scrollbars for too big translated messages (but how to detect it) -*** move drakedm from hardware to system section -*** enhance mcc descriptions (#3265) -** rpmdrake -*** save mode (sort by group, mdk choice, ...) -**** sa serait cool que tu sauve la position (aka choix mdk, tri/alpha, par - groupe, par taille, ...) et que tu la restaure -*** m-q accelerator to quit -*** if package is unselectable, explain why -*** si conflit, proposer de deselectionner le package en question +tot que de - devoir se taper l'arborescence pour le deselectionner (a - que la - recherche e perde pas la selection de package en cours) -*** some windows are still non modal, like: - o tout ce qui se rapporte aux dependances "des paquetages - supplementaires sont necessaires", ... tu oublie de passer "{ - transient => $w->{rwindow} }" - o toutes les fenetres grpmi. faudrait voir si on peut foutre le - core de grpmi dans un package pour faire "use grpmi" et seter - le nouveau $::main_window pour corriger ca. -*** we need access to urpmi options like "no gpg signature check" -*** bug 1 -1) selectionner des packages a installer - -2) rpmdrake dit que X doit etres vier - -3) rpmdrake le vire - -4) rpmdrake passe a l'update/isntall proprement dite - -5) rpmdrake failled - -rpmdrake re-tentera d'enlever le package X du 1 en cas de reessai -alors qu'il n'est + la - -** scannerdrake/sane-find-scanner -*** do not detect every usb devices as scanner -** urpmi -*** --repair-system: add missing dependancies for currently installed packages - - -* packages -** main package updates: -*** rpm-4.2 -*** kernel-2.6 (if availlable and stabilized: not probable) ? - at least, keep kernel-2.4.x -** add new packages: -*** kernel-mosix -*** dvb related packages: vcr, vdr, ... -** icewm/windowmaker/other wm -*** export BROWSER like gnome/kde (look at /etc/gnome/gnomerc) - -* hardware support -** kernel: update alsa, bttv, dvb & saa7134 drivers for better hardware support (the laters from http://bytesex.org) -*** add "REGISTER ^dvb/adapter[0-9]+/[^/]+$ PERMISSIONS root.video 0660" to devfsd -*** update oss audigy driver from pserver:anonymous@cvs.sourceforge.net:/cvsroot/emu10k1 cvs -** add cx88 sound driver from http://bytesex.org/snapshot -** isa detection/probing in ldetect ? (#118, #497) => need some old hw in order to test - probably not diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat deleted file mode 100644 index 4d0de8223..000000000 --- a/docs/mdk-vs-redhat +++ /dev/null @@ -1,43 +0,0 @@ -+ Open Development (at least DrakX) -+ UDMA66 (HPT366) -+ gamerz -+ number of packages -+ better packages(?) -+ no automatic handling of ide burners -+ urpmi/rpmdrake -+ XFdrake -+ no newbie install -+ reiserfs -+ fat resizing -+ 3D handling (eg: Voodoo3) -+ diskdrake (vs diskdruid) -+ usb storage (?) -+ KDE2 -+ faces in kdm/gdm -+ menu -+ alternatives -+ /etc/emacs/site-start.d -+ default config -+ i18n (bootloader keyboard) - -+ More user-friendliness in general: - + you can choose between multiple net devices when more than one are - detected - + you are presented with the media descriptions (disks, cdrom's) - when you must choose between multiple media, and not only "sda", - "hdc", .. - + when installing from a disk partition, you are presented with an - extract of the directory contents when you fail to give the - correct location, which is very helpful to correct the input - instead of simply rebooting to remember where on earth you - mirrored the distribution on your disks - -+ Automatic mode (Redhat's equivalent is called "kickstart") is not - performed according to a file on the floppy but from kernel parameters, - which have many pros, among them: (1) we don't need the vfat filesystem - for that purpose, and (2) with advanced bootloaders such as grub and - lilo you can edit parameters on the fly at boot time. - -- no LABEL= in fstab (for auto renumbering of devices) -- kerberos -- LDAP diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig deleted file mode 100644 index 19f7f5318..000000000 --- a/docs/net_object_class.fig +++ /dev/null @@ -1,73 +0,0 @@ -#FIG 3.2 -Landscape -Center -Inches -Letter -100.00 -Single --2 -1200 2 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400 -1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 4125 1875 3225 2850 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 4575 1950 4200 3750 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 5250 1950 5475 2775 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 3000 3450 3600 3900 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 5925 3450 6675 3900 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 2700 3450 4050 5550 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 4125 4500 4575 5400 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 5625 3450 5025 5400 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 5775 1575 9450 4725 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 7800 4275 9000 4800 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 4800 1950 4800 5400 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 9000 975 9450 4725 -2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5 - 7500 75 10687 75 10687 975 7500 975 7500 75 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 7500 375 5400 1050 -2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2 - 0 0 1.00 60.00 120.00 - 5550 1800 7200 3675 -4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001 -4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001 -4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001 -4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001 -4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001 -4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001 -4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001 -4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001 -4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001 -4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001 -4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001 -4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001 diff --git a/docs/object_class.fig b/docs/object_class.fig deleted file mode 100644 index 44fd3fe89..000000000 --- a/docs/object_class.fig +++ /dev/null @@ -1,32 +0,0 @@ -#FIG 3.2 -Landscape -Center -Inches -Letter -100.00 -Single --2 -1200 2 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 2625 1200 2625 1725 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 7575 1125 7575 1650 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 7575 2100 4350 3225 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 5025 2025 4350 3225 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 2625 2100 4350 3225 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 5025 2025 6075 4125 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 2625 1200 4950 1725 -2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2 - 7575 1125 4950 1725 -4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001 -4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001 -4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001 -4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001 -4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001 -4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001 -4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001 diff --git a/docs/porting-ugtk b/docs/porting-ugtk deleted file mode 100755 index a72faabb6..000000000 --- a/docs/porting-ugtk +++ /dev/null @@ -1,48 +0,0 @@ -#!/usr/bin/perl -pi -# -# $Id$ -# -# This is not an automatic gtk+-1.x to gtk+-2.x port tool, -# just a tool that ease perl apps' gtk2 port. -# you'll have to fix all remaining problems, beginning by spotted warnings -# it'll save you basic conversion work -# -# if you used Gtk::Text, a little more work will be needed (look at logdrake gtk2 port) -# if you used Gtk::CTree, Gtk::CList or worse, Gtk::Tree, you'll need quite a lot of exhausting work :-( -# -# usage: porting-ugtk <file> -# -# hint: always use strict - -# switch to gtk2 : -s!Gtk:!Gtk2:!g; -/(use|require) Gtk/ and print STDERR "Warning: if this (bad) app that did not use my_gtk, you'll have a hard time :-)\n if not, using both Gtk && my_gtk was misdesigned ...\n"; -s!(use|require) Gtk.*!!g; # -s!my_gtk!ugtk2!g; - -# one should pass the right ":stuff" to "use ugtk2 qw();" -/ugtk::/ and print STDERR "Warning: you'll have to passe eiter :ask, :create, :helpers or :wrappers to ugtk\n"; -s!ugtk::!!g; -# if my_gtk wasn't used, this'll be spotted by the lack of "use ugtk2;" anyway -s!(require|use) ugtk.*!!g; - - -# deprecated : -/::(CTree|CList|Text[^V])/ and print STDERR "Warning: CTree, CList and Text widgets are deprecated... Good luck :-(\n"; -/gtkcreate_(png|xpm)/ and print STDERR "Warning: new Gtk::Pixmap(gtkcreate_(png|xpm)) should be replaced by gtkcreate_img\n"; -/set_policy/ and print STDERR "Warning: ->set_policy() should be replaced by allow_shrink/allow_grow/set_resizable\n"; - -# obsoletes methods||functions : -s!set_usize!set_size_request!g; -s!gtkset_set_border_width!gtkset_border_width!g; -s!border_width!set_border_width!g; -s!-(end|spread|extended|start|single)!'\1'!g; -s!createScrolledWindow!create_scrolled_window!g; -# quite a lot less usefull with gtk+2 but who knows... : -s!set_position\(1\)!set_position('center')!g; -s!gtkpng!gtkcreate_img!g; -# hacky but usefull in ->set_pixmap() context; else that'll be spoted at run time : -s!gtkcreate_png!gtkcreate_img!g; -# usefull sometimes but not in most cases : -#s!new GtkVBox!create_vbox!g; -#s!new GtkHBox!create_hbox!g; diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html deleted file mode 100644 index 3fd545447..000000000 --- a/docs/spec-DrakX-8.0.html +++ /dev/null @@ -1,405 +0,0 @@ -<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head> -<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000"> -<table border="0" cellpadding="0" cellspacing="0" width="100%"> -<tr> -<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr> -<tr><td valign="top"> -Current team of Install group is : -<p> -<table cellpadding="2" cellspacing="2" border="1" width="30%"> -<tbody> -<tr valign="Top"> -<td valign="Top">gc - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">damien - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">fpons - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">pixel - -</td> -</tr> -</tbody> -</table> -<p> - -<pre> - - <b>Boot process (stage1)</b> - - Installation begin by booting from CD-ROM or Diskette. From CD-ROM all -installation method are available (CD, HD, NFS, FTP, HTTP) on options. From -Diskette according to image selected, only some related method (network or cdrom -or hd) are available and module managed due to size limitation to 1.44Mb. - Options are always available by pressing on F1. - - <b>DrakX process (stage2)</b> - - DrakX installation organized in steps (execution sequence described below). -Steps listed on left side and help available on bottom right side. most of the -screen is available for various dialog for interacting with the user. Steps -execution sequence is automated and described below. - -Mouse is probed and if none has been found or if the mouse has not moved, a -specific mouse configuration is displayed at the begining. - - -Before the graphical steps, there is a detection step. It detects various -hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and -tablets. - - <b>Steps</b> - - <i>Choose Your language</i>: step always displayed. default choice is previous one or -<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the -chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should -stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all -DrakX visible widget. Advanced mode allow to select other language available to -be installed. Advanced mode allow to select language which will be installed on -system. - If step is redone, the license is no more displayed. - - <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one -or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons -available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed -according to installation class selected, where the default is the one of -<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>. - - <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode, -automatically done. In Customized mode, all modules that manage SCSI/IDE cards -are loaded automatically and a question asking for other module to load is -displayed. - If clicked later or if to the question to load other module the -answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other -module to load is. When a module is chosen, two options are available -<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any -other user options (default module parameter). Specify options allow user to -give module parameters individually in a list for all known parameters. At this -point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation -and go to next step. If any error occurs during module installation, a question -asking to try with other parameter is displayed, the same module is still used. - - <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice -accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing -partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the -Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk -configuration => only one big fat for the first case only), "Custom disk -partitioning". - If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk. - If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux -scheme are displayed with their approximate size in Mb and propose mount point -to choose in list boxes for each partitions available on hard drive. - If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size -on the windows partition to create a root file and a swap file which will be -used in loopback, this means this is a lnx4win installation. - If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize -the windows partition and allocate true linux filesystem (at least / and swap). - If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the -partition table before auto allocating partition. - If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to -change make diskdrake use only advanced mode. -Diskdrake show all partition of all non-removable disk graphically. All special -partition are hidden, only user accessible partition are visible: this remove -extended partition, whole disk partition on sparc platform. Clicking on a disk -notebook tab show all his partitions. Clicking on a partition show all actions -available for this partition (depend if customized or advanced mode) as well as -information on this partition (depend if customized or advanced mode). Most -diskdrake operation are done without writing on disk (exception are Resizing -partitions) and everything is written once on the disk when exiting diskdrake, -at any time if writing partition table is necessary, there are always a dialog -box asking the user to confirm the write. If no operation are modifying -partition table, no dialog is displayed on exit (for example if giving mount -point to partition). General action are available too: - <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk. - <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the -seen disk). - <font color="#000080"><i>Undo</i></font>: undo last operation. - <font color="#000080"><i>Done</i></font>: quit and save changes. -Other operations are available in advanced mode: - <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table, -absolutely no garantee to succeed and may destroy what could be saveable by -another tools. - <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in -memory done by the user. - <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default -behaviour on startup. - <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved -partition table from diskdrake. - <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy. - <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This -include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default. - Operation available on partition are: - <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only -available for true filesystem partition. - <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is -used no data may be lost, else all data are lost but nothing is written by -diskdrake on the partition data in this last case (this means data can be -restored by restoring original size and location). - <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type, -location, size) all data can be restored as diskdrake doesn't write on partition -data. - Operation available on partition table but in advanced mode are: - <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as -above does not destroy them, and everyting can be restored. - <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST. - <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory -capacity for machine low on resource that are not available to complete setup -filesystem step correctly (problably if a resize partition is used on FAT fs). -allow Mounting swap on customized mode too. - A legend for partition type colors is available -(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a -partition or change its type (only available in advanced mode). - - <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to -format with click boxes. Some are defined according to type of partitions and if -the partition has been created or taken back. -If a partition has already been formated, it is not proposed, or if it should -not be proposed (alrady existing partition like /mnt/windows). -On Advanced tag, an additional dialog is displayed to select partition to format -(all available partition listed) and to format them with bad block checking. - - <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be -<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available. -This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages. -On all mode, display groups and main desktop used (KDE or Gnome), an -individual package selection check box is available to allow selecting package -individually. In this case, a dialog displaying a tree with groups, (Mandrake -first choice/alternatives) and packages is shown on the left part, a description -window for each packages is shown on the right part. - - <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display -installation progression. include if available and on a CD basis a spash screen -of advertising and other (pub!). - - <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for -Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor. -At each values chosen (list boxes displayed a -synthesis description) the current dialog is removed from screen and specific -configuration panels are displayed (like currently for mouse, keyboard ...). -And end of these specific configuration panels, this one is remapped on screen -to be accepted in general. - - <b>Sub steps of Hardware panel:</b> - - <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been -moved (so unsafe detection), but have to be displayed earlier. A mouse tree -selection for type is displayed with default case as what is probed or -<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse -modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial -port dialog for serial mice (default mouse connected to COM1 if nothing found). -Then a mouse screen control is chown (according to mouse capacity: 3 buttons -with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to -next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for -type). - - <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to -TimeZone definition (itself defaulting to language selection at the beginning). -A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to -<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and -return to the same <font color="#000080"><i>Hardware panel</i></font> dialog. - - <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to -language selection. A timezone tree selection is shown with only the subtree -corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font> -validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid -the change before returning to the same main dialog. - - <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available. - - <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available. - - <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max -resolution and depth displayed. No change available. - - - Miscellaneous step have been removed and dispatched to other steps. "Use -hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose -security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and -<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step. -<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options. - - <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should -display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and -for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too. - - <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in -both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration -entries are shown with the following: - <font color="#000080"><i>Configure a normal modem connection</i></font> - <font color="#000080"><i>Configure an ISDN connection</i></font> - "Configure a DSL (or ADSL) connection - <font color="#000080"><i>Configure a cable connection</i></font> - <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font> - <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> - <font color="#000080"><i>Done</i></font> - By cliking on a specific item, another dialog is displayed to configure -some specific part of the network. - <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a -modem if not already detected, then if none are found or probe has been refused -a list of possible serial device are listed (in the form ttySx / COM(x+1) with -the current mouse device removed if it is serial). After that a dialog including -all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>, -<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font> -and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and -<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of -testing TO BE DEFINED). If no DNS are given, the connection is configured to try -using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available. - <font color="#000080"><i>Configure an ISDN connection</i></font>: -Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI -card, and gives the list of the cards. Information are then asked: -<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0 -<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1 -<font color="#000080"><i>Your personal phone number</i></font> phone -<font color="#000080"><i>Provider name (ex provider.net)</i></font> -<font color="#000080"><i>Provider phone number</i></font> -<font color="#000080"><i>Provider dns 1</i></font> -<font color="#000080"><i>Provider dns 2</i></font> -<font color="#000080"><i>Dialing mode</i></font> auto or manual -<font color="#000080"><i>Account Login (user name)</i></font> -<font color="#000080"><i>Account Password</i></font> hided -<font color="#000080"><i>Confirm Password</i></font> again - <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>: -The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN. -If there is more than one ethernet card, The user must choose the card to use -(displayed with the module). After that, some informations are asked: -<font color="#000080"><i>Provider name (ex provider.net)</i></font> -<font color="#000080"><i>Provider dns 1</i></font> -<font color="#000080"><i>Provider dns 2</i></font> -<font color="#000080"><i>Account Login (user name)</i></font> -<font color="#000080"><i>Account Password</i></font> hided -<font color="#000080"><i>Confirm Password</i></font> again - <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN - <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question -about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons. -<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with -<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous -question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is -displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for -IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then -if DHCP has been chosen, only a dialog asking for Host name and another for HTTP -proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be -defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway -device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As -network configuration may to have been reworked a bit it has TO BE DEFINED if -this is kept like that or not. - <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle -networking on or off, may be to be accessible only for advanced mode. - <font color="#000080"><i>Quit</i></font> exit the network step. - -<b>NETWORK ADVANCED DOCUMENTATION:</b> -Here is a list of entry points available in post install without using the ugly -install graphic toolkit: - -<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a> - - <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only -activated if a local printer is detected, else no printer are configured by -default. In customized mode or if the step has been clicked a list of printer -already configured is displayed and the possibility to add or exit the -configuration. It allow configuration of printers for both LPR and CUPS -individually (available by advanced mode when adding a printer). Printer -protocol managed are local/usb/samba/ncp/lpd for LPR and -local/usb/serial/samba/lpd/cups_network for CUPS. - - <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In -recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry -to select the root password. In advanced mode, a Use NIS (yellow pages) check -boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No -password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low" -security level or less. The length of the minimal password depend upon security level. - -In corporate firewall : - <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only - displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry -to select the admin password. -The length of the minimal password depend upon security level. (double of the - security level) - - <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode -display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon -choices as graphical. For customized mode a shell combo is available to choose a -specific shell for the user depending on the package installed. The real name is -the user friendly name of the user whereas user name is its login id name. The -box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font> -button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or -higher security level implies the creation of at least one user. Password length -are subject to same restriction according to security level. In advanced mode, -allow to choose the user in auto login mode. - - <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this -step is automatically done by doing nothing. If clicked or customized mode, the -user is prompted to allow building a boot disk (default is yes). In advanced -mode allow selection of floppy drive. - - <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this -step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the -various boot device that can be used where the bootloader can be installed. The -boot device can the Linux description of the whole disk available (ex: /dev/hda) -or partition available in these disk or floppy drives. Other platform -specificity are not listed here. - LBA check box is displayed in advanced mode (enabled by default) to -allow using LBA addressing if available (PC with LILO). bootloader combo to -select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text -menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO -with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry -field is available with default value current setting (upgrade) or 5 else. -<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too, -<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too. -Boot in graphical mode (init 5) is available here in advanced mode too -(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>, -<font color="#000080"><i>Restrict command line options</i></font> check box is displayed. -Video mode combo list text mode and video mode used for frame buffer, video mode -used for frame buffer are available only if the install managed to boot with -frame buffer activated. Password are restricted according to security level as -other password. Password are mandatory according to security level TO BE DEFINED. - - <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode, -everything is done automatically if possible up to test of graphic card, and if -the user accept the settings no more question are asked to him. In customized -mode a dialog is displayed to choose resolution, color depth and which version -of XFree (with 3D optionally) is available for the current card where only a -short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the -first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration -window allowing to change Monitor, Graphic card, Server options or Resolution -with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions -according to card (with onboard memory) only and no more monitor capabilities. - The main dialog is a list of command to change some X configuration aspect -according to advanced mode or not : - <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one -is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. - <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where -default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font> -is chosen, then a tree of server/driver is displayed containing available server -for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates -change. - <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list -of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available. - <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server -version chosen (relative to Xdrakres too). - <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current -configuration internals of X. - <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X. - <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin -and window manager to use are asked on Add user step. - - <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always -executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step -have not been executed/completed correctly, a question dialog ask the user if he -really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access -to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX < 8.0. This is just a -question asking the user to generate an auto install floppy automatically. -</pre> -</body> -</html> diff --git a/docs/wizard.doc b/docs/wizard.doc deleted file mode 100644 index 0bbf8d254..000000000 --- a/docs/wizard.doc +++ /dev/null @@ -1,31 +0,0 @@ -How to handle wizard? - -to switch in wizard mode: -set $::isWizard to true; -if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step -if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step - -how to code: -Code as if there were no wizard. -OK button is displayed as Next -Cancel is displayed as Previous -a additional button Cancel is added, xhich die with the exception 'wizard_cancelled' - -You have to handle the previous button. For example: - -step 1: -ask_from list( blablablabl) or return; -step2: -ask_from list( blablablabl) or goto step1; -step3: -ask_from list( blablablabl) or goto step2; - -etc... You don't have to handle the wizard Cancel button as it send an exception. - -Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually. - -plop. - -dam's, pour vous servir - - |
