summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--perl-install/Xconfigurator.pm36
-rw-r--r--perl-install/diskdrake/interactive.pm2
-rw-r--r--perl-install/diskdrake/removable_gtk.pm2
-rw-r--r--perl-install/fsedit.pm4
-rw-r--r--perl-install/install_interactive.pm12
-rw-r--r--perl-install/install_steps_gtk.pm4
-rw-r--r--perl-install/install_steps_interactive.pm18
-rw-r--r--perl-install/interactive_stdio.pm4
-rw-r--r--perl-install/network/isdn.pm12
-rw-r--r--perl-install/network/netconnect.pm8
-rw-r--r--perl-install/network/network.pm4
-rw-r--r--perl-install/network/tools.pm2
-rw-r--r--perl-install/partition_table.pm2
-rw-r--r--perl-install/printer.pm2
-rw-r--r--perl-install/printerdrake.pm46
15 files changed, 81 insertions, 77 deletions
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm
index 5c063668f..6e849c3e6 100644
--- a/perl-install/Xconfigurator.pm
+++ b/perl-install/Xconfigurator.pm
@@ -258,8 +258,8 @@ What do you want to do?"), sub { translate($_[0]{text}) }, \@choices) or return;
$card->{server} = 'FBDev' unless !$cardOptions->{allowFB} || $card->{server} || $card->{driver} || $card->{type} || $noauto;
my $currentRealName = realName2CardName($card->{type} || $cards[0]{type}) || 'Other|Unlisted';
- $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphic card"),
- _("Select a graphic card"), '|', ['Other|Unlisted', readCardsNames()],
+ $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphics card"),
+ _("Select a graphics card"), '|', ['Other|Unlisted', readCardsNames()],
$currentRealName))
or return unless $card->{type} || $card->{server} || $card->{driver};
@@ -493,7 +493,7 @@ NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)) . "
$card->{options_xf4}{DPMS} = 'on';
$card->{flags}{needVideoRam} and
- $card->{memory} ||= $videomemory{$in->ask_from_list_('', _("Select the memory size of your graphic card"),
+ $card->{memory} ||= $videomemory{$in->ask_from_list_('', _("Select the memory size of your graphics card"),
[ sort { $videomemory{$a} <=> $videomemory{$b} }
keys %videomemory]) || return};
@@ -622,7 +622,7 @@ sub testFinalConfig {
$in->ask_warn('', _("Monitor not configured")), return;
$o->{card}{server} || $o->{card}{driver} or
- $in->ask_warn('', _("Graphic card not configured yet")), return;
+ $in->ask_warn('', _("Graphics card not configured yet")), return;
$o->{card}{depth} or
$in->ask_warn('', _("Resolutions not chosen yet")), return;
@@ -637,7 +637,7 @@ sub testFinalConfig {
$o->{card}{identifier} =~ /Matrox|Rage Mobility [PL]|SiS.*SG86C2.5|SiS.*559[78]|SiS.*300|SiS.*540|SiS.*6C?326|SiS.*6C?236|Tseng.*ET6\d00|Riva.*128/ :
$o->{card}{identifier} =~ /i740|Rage Mobility [PL]|3D Rage LT|Rage 128/);
$::live and $bad_card ||= $o->{card}{identifier} =~ /S3.*ViRGE/;
- log::l("the graphic card does not like X in framebuffer") if $bad_card;
+ log::l("the graphics card does not like X in framebuffer") if $bad_card;
my $verybad_card = $o->{card}{driver} eq 'i810' || $o->{card}{driver} eq 'fbdev';
$verybad_card ||= $o->{card}{driver} eq 'nvidia' && !$::isStandalone; #- avoid testing during install at any price.
@@ -647,7 +647,7 @@ sub testFinalConfig {
my $def = 1;
if ($bad_card && !$::isStandalone) {
$skip_badcard and return 1;
- $mesg = $mesg . "\n" . _("Warning: testing this graphic card may freeze your computer");
+ $mesg = $mesg . "\n" . _("Warning: testing this graphics card may freeze your computer");
$def = 0;
}
$auto && $def or $in->ask_yesorno(_("Test of the configuration"), $mesg, $def) or return 1;
@@ -689,7 +689,7 @@ sub testFinalConfig {
while (<F>) {
/reporting a problem/ and last;
push @msg, $_;
- $in->ask_warn('', [ _("An error has occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
+ $in->ask_warn('', [ _("An error occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
return 0;
}
}
@@ -701,7 +701,7 @@ sub testFinalConfig {
/^$/ and last;
push @msg, $_;
}
- $in->ask_warn('', [ _("An error has occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
+ $in->ask_warn('', [ _("An error occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
return 0;
}
}
@@ -748,7 +748,7 @@ sub testFinalConfig {
kill 2, $pid;
$::noShadow = 0;
- $rc || $err == 222 << 8 or $in->ask_warn('', _("An error has occurred, try to change some parameters"));
+ $rc || $err == 222 << 8 or $in->ask_warn('', _("An error occurred, try to change some parameters"));
$rc;
}
@@ -873,7 +873,7 @@ sub chooseResolutionsGtk($$;$) {
gtkadd($W->{window},
gtkpack_($W->create_box_with_title(_("Choose the resolution and the color depth"),
"(" . ($card->{type} ?
- _("Graphic card: %s", $card->{type}) :
+ _("Graphics card: %s", $card->{type}) :
_("XFree86 server: %s", $card->{server})) . ")"
),
1, gtkpack2(new Gtk::VBox(0,0),
@@ -1512,9 +1512,9 @@ sub info {
$info .= _("Monitor: %s\n", $o->{monitor}{type});
$info .= _("Monitor HorizSync: %s\n", $o->{monitor}{hsyncrange}) if $::expert;
$info .= _("Monitor VertRefresh: %s\n", $o->{monitor}{vsyncrange}) if $::expert;
- $info .= _("Graphic card: %s\n", $o->{card}{type});
- $info .= _("Graphic card identification: %s\n", $o->{card}{identifier}) if $::expert;
- $info .= _("Graphic memory: %s kB\n", $o->{card}{memory}) if $o->{card}{memory};
+ $info .= _("Graphics card: %s\n", $o->{card}{type});
+ $info .= _("Graphics card identification: %s\n", $o->{card}{identifier}) if $::expert;
+ $info .= _("Graphics memory: %s kB\n", $o->{card}{memory}) if $o->{card}{memory};
if ($o->{default_depth} and my $depth = $o->{card}{depth}{$o->{default_depth}}) {
$info .= _("Color depth: %s\n", translate($depths{$o->{default_depth}}));
$info .= _("Resolution: %s\n", join "x", @{$depth->[0]}) if $depth && !is_empty_array_ref($depth->[0]);
@@ -1564,7 +1564,7 @@ sub main {
{ format => sub { $_[0][0] }, val => \$f,
list => [
[ _("Change Monitor") => sub { $o->{monitor} = monitorConfiguration() } ],
- [ _("Change Graphic card") => sub { my $card = cardConfiguration('', 'noauto', $cardOptions);
+ [ _("Change Graphics card") => sub { my $card = cardConfiguration('', 'noauto', $cardOptions);
$card and $o->{card} = $card } ],
if_($::expert,
[ _("Change Server options") => sub { optionsConfiguration($o) } ]),
@@ -1580,7 +1580,7 @@ sub main {
}
if (!$ok) {
$ok = $in->ask_yesorno('', _("Keep the changes?
-Current configuration is:
+The current configuration is:
%s", info($o)));
}
@@ -1600,9 +1600,9 @@ Current configuration is:
if (!$::isStandalone || $0 !~ /Xdrakres/) {
$in->set_help('configureXxdm') unless $::isStandalone;
- my $run = exists $o->{xdm} ? $o->{xdm} : $::auto || $in->ask_yesorno(_("X at startup"),
-_("I can set up your computer to automatically start X upon booting.
-Would you like X to start when you reboot?"), 1);
+ my $run = exists $o->{xdm} ? $o->{xdm} : $::auto || $in->ask_yesorno(_("Graphical interface at startup"),
+_("I can setup your computer to automatically start the graphical interface (XFree) upon booting.
+Would you like XFree to start when you reboot?"), 1);
any::runlevel($prefix, $run ? 5 : 3) unless $::testing;
}
if ($::isStandalone && $in->isa('interactive_gtk')) {
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
index ab8cb0e22..72f001d31 100644
--- a/perl-install/diskdrake/interactive.pm
+++ b/perl-install/diskdrake/interactive.pm
@@ -990,7 +990,7 @@ sub need_migration {
if (@l && $::isStandalone) {
my $choice;
my @choices = (__("Move files to the new partition"), __("Hide files"));
- $in->ask_from('', _("Directory %s already contain some data\n(%s)", $mntpoint, formatList(5, @l)),
+ $in->ask_from('', _("Directory %s already contains data\n(%s)", $mntpoint, formatList(5, @l)),
[ { val => \$choice, list => \@choices, type => 'list' } ]) or return;
$choice eq $choices[0] ? 'migrate' : 'hide';
} else {
diff --git a/perl-install/diskdrake/removable_gtk.pm b/perl-install/diskdrake/removable_gtk.pm
index ee61fa5b8..da897b67a 100644
--- a/perl-install/diskdrake/removable_gtk.pm
+++ b/perl-install/diskdrake/removable_gtk.pm
@@ -25,7 +25,7 @@ sub per_entry_action_box {
createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
} else {
- my $txt = _("Please click on a media");
+ my $txt = _("Please click on a medium");
gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
}
}
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index d973adeb3..1883e9e88 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -483,7 +483,7 @@ sub check_mntpoint {
if ($mntpoint eq '/' || $mntpoint eq '/boot') && isLVM($hd);
die _("This directory should remain within the root filesystem")
if member($mntpoint, qw(/bin /dev /etc /lib /sbin));
- die _("You need a true filesystem (ext2, reiserfs) for this mount point\n")
+ die _("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
die _("You can't use an encrypted file system for mount point %s", $mntpoint)
if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var));
@@ -694,7 +694,7 @@ sub verifyHds {
my ($hds, $readonly, $ok) = @_;
if (is_empty_array_ref($hds)) { #- no way
- die _("An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
+ die _("An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
}
my @parts = readProcPartitions($hds);
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
index aad24c3a0..b9ee10de7 100644
--- a/perl-install/install_interactive.pm
+++ b/perl-install/install_interactive.pm
@@ -61,7 +61,7 @@ Then choose action ``Mount point'' and set it to `/'"), 1) or return;
}
if (!grep { isSwap($_) } @fstab) {
$o->ask_warn('', _("You must have a swap partition")), $ok=0 if !$::expert;
- $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition\n\nContinue anyway?"));
+ $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition.\n\nContinue anyway?"));
}
if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) {
$o->ask_warn('', _("You must have a FAT partition mounted in /boot/efi"));
@@ -97,7 +97,7 @@ sub partitionWizardSolutions {
if (my @truefs = grep { isTrueFS($_) } @$fstab) {
#- value twice the ext2 partitions
- $solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partition"), sub { $o->ask_mntpoint_s($fstab) } ]
+ $solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ]
} else {
push @wizlog, _("There is no existing partition to use");
}
@@ -127,13 +127,13 @@ sub partitionWizardSolutions {
$o->set_help('resizeFATChoose');
my $part = $o->ask_from_listf('', _("Which partition do you want to resize?"), \&partition_table::description, \@ok_forloopback) or return;
$o->set_help('resizeFATWait');
- my $w = $o->wait_message(_("Resizing"), _("Computing Windows filesystem bounds"));
+ my $w = $o->wait_message(_("Resizing"), _("Resizing Windows partition"));
require resize_fat::main;
my $resize_fat = eval { resize_fat::main->new($part->{device}, devices::make($part->{device})) };
$@ and die _("The FAT resizer is unable to handle your partition,
the following error occured: %s", $@);
my $min_win = $resize_fat->min_size;
- $part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented, please run ``defrag'' first");
+ $part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.");
$o->ask_okcancel('', _("WARNING!
DrakX will now resize your Windows partition. Be careful:
@@ -144,7 +144,7 @@ installation. You should also backup your data.
When sure, press Ok.")) or return;
my $mb_size = $part->{size} >> 11;
- $o->ask_from('', _("Which size do you want to keep for windows on"), [
+ $o->ask_from('', _("Which size do you want to keep for Windows on"), [
{ label => _("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
]) or return;
@@ -167,7 +167,7 @@ When sure, press Ok.")) or return;
1;
} ] if !$readonly;
} else {
- push @wizlog, _("There is no FAT partitions to resize or to use as loopback (or not enough space left)") .
+ push @wizlog, _("There is no FAT partition to resize or to use as loopback (or not enough space left)") .
@fats ? "\nFAT partitions:" . join('', map { "\n $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '';
}
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
index 3ff152681..d9782f4ea 100644
--- a/perl-install/install_steps_gtk.pm
+++ b/perl-install/install_steps_gtk.pm
@@ -450,7 +450,7 @@ sub choosePackagesTree {
} elsif (pkgs::packageFlagUpgrade($p)) {
if ($::expert) {
if (pkgs::packageFlagSelected($p)) {
- $o->ask_yesorno('', _("This package must be upgraded\nAre you sure you want to deselect it?")) or return;
+ $o->ask_yesorno('', _("This package must be upgraded.\nAre you sure you want to deselect it?")) or return;
}
return 1;
} else {
@@ -525,7 +525,7 @@ sub installPackages {
)), 0, 1, 0);
$details->hide if !@install_any::advertising_images;
$w->sync;
- $msg->set(_("Please wait, preparing installation"));
+ $msg->set(_("Please wait, preparing installation..."));
gtkset_mousecursor_normal($cancel->window);
gtkset_mousecursor_normal($details->window);
my $advertize = sub {
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
index d58232ca4..e0750031a 100644
--- a/perl-install/install_steps_interactive.pm
+++ b/perl-install/install_steps_interactive.pm
@@ -324,7 +324,7 @@ sub ask_mntpoint_s {
my @fstab = grep { isTrueFS($_) } @$fstab;
@fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
@fstab = @$fstab if @fstab == 0;
- die _("no available partitions") if @fstab == 0;
+ die _("No partition available") if @fstab == 0;
{
my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
@@ -470,13 +470,13 @@ sub formatMountPartitions {
#------------------------------------------------------------------------------
sub setPackages {
my ($o) = @_;
- my $w = $o->wait_message('', _("Looking for available packages"));
+ my $w = $o->wait_message('', _("Looking for available packages..."));
$o->SUPER::setPackages;
}
#------------------------------------------------------------------------------
sub selectPackagesToUpgrade {
my ($o) = @_;
- my $w = $o->wait_message('', _("Finding packages to upgrade"));
+ my $w = $o->wait_message('', _("Finding packages to upgrade..."));
$o->SUPER::selectPackagesToUpgrade();
}
#------------------------------------------------------------------------------
@@ -893,7 +893,7 @@ Do you want to install the updates ?"))) || return;
require crypto;
eval {
my @mirrors = do { my $w = $o->wait_message('',
- _("Contacting Mandrake Linux web site to get the list of available mirrors"));
+ _("Contacting Mandrake Linux web site to get the list of available mirrors..."));
crypto::mirrors() };
#- if no mirror have been found, use current time zone and propose among available.
$u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone});
@@ -907,7 +907,7 @@ Do you want to install the updates ?"))) || return;
return if $@ || !$u->{mirror};
my $update_medium = do {
- my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages"));
+ my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages..."));
crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
};
@@ -1079,7 +1079,7 @@ sub setRootPassword {
complete => sub {
$sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,0);
length $sup->{password} < 2 * $o->{security}
- and $o->ask_warn('', _("This password is too simple (must be at least %d characters long)", 2 * $o->{security})), return (1,0);
+ and $o->ask_warn('', _("This password is too short (it must be at least %d characters long)", 2 * $o->{security})), return (1,0);
return 0
} } }, [
{ label => _("Password"), val => \$sup->{password}, hidden => 1 },
@@ -1186,14 +1186,14 @@ because XFS needs a very large driver).") : '')),
$o->ask_warn('', _("Insert a floppy in %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
}
- my $w = $o->wait_message('', _("Creating bootdisk"));
+ my $w = $o->wait_message('', _("Creating bootdisk..."));
install_steps::createBootdisk($o);
}
#------------------------------------------------------------------------------
sub setupBootloaderBefore {
my ($o) = @_;
- my $w = $o->wait_message('', _("Preparing bootloader"));
+ my $w = $o->wait_message('', _("Preparing bootloader..."));
$o->set_help('empty');
$o->SUPER::setupBootloaderBefore($o);
}
@@ -1282,7 +1282,7 @@ sub generateAutoInstFloppy {
my $dev = devices::make($floppy);
{
- my $w = $o->wait_message('', _("Creating auto install floppy"));
+ my $w = $o->wait_message('', _("Creating auto install floppy..."));
install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
}
common::sync(); #- if you shall remove the floppy right after the LED switches off
diff --git a/perl-install/interactive_stdio.pm b/perl-install/interactive_stdio.pm
index ef77e8884..519f5ccbe 100644
--- a/perl-install/interactive_stdio.pm
+++ b/perl-install/interactive_stdio.pm
@@ -91,7 +91,7 @@ ask_fromW_begin:
$i and ${$e->{val}} = ${$e->{list}}[$i-1], $common->{callbacks}{changed}->($ind);
} elsif ($e->{type} eq 'button') {
print _("Button `%s': %s", $e->{label}, may_apply($e->{format}, ${$e->{val}})), " $e->{text}\n";
- print _("Do you want to click on this button? ");
+ print _("Do you want to click on this button?");
my $i = readln();
($i && $i !~ /^n/i) and $e->{clicked_may_quit}(), $common->{callbacks}{changed}->($ind);
} elsif ($e->{type} eq 'label') {
@@ -100,7 +100,7 @@ ask_fromW_begin:
print $t;
} elsif ($e->{type} eq 'entry') {
print "$e->{label} $e->{text}\n";
- print _("Your choice? (default `%s'%s) ", ${$e->{val}}, ${$e->{val}} ne '' ? " enter `void' for void entry" : '');
+ print _("Your choice? (default `%s'%s) ", ${$e->{val}}, ${$e->{val}} ne '' ? _(" enter `void' for void entry") : '');
my $i = readln();
${$e->{val}} = $i || ${$e->{val}};
${$e->{val}} = '' if ${$e->{val}} eq 'void';
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
index 5646ca01f..a6ac063d1 100644
--- a/perl-install/network/isdn.pm
+++ b/perl-install/network/isdn.pm
@@ -167,7 +167,7 @@ sub isdn_ask_info {
my ($isdn, $netc) = @_;
my $f = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
$f = "$prefix$f" if !-e $f;
- my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\n If it's not in the list, choose Unlisted"),
+ my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\nIf it isn't listed, choose Unlisted."),
'|', ['Unlisted - edit manually',
read_providers_backend($f)], 'Unlisted - edit manually')
or return;
@@ -182,11 +182,11 @@ sub isdn_ask_protocol {
my @toto=(
{ description => $::expert ? _("Europe protocol (EDSS1)") : _("Europe protocol"),
protokol => 2},
- { description => $::expert ? _("Protocol for the rest of the world \n no D-Channel (leased lines)") : _("Protocol for the rest of the world"),
+ { description => $::expert ? _("Protocol for the rest of the world\nNo D-Channel (leased lines)") : _("Protocol for the rest of the world"),
protokol => 3}
);
my $e = $in->ask_from_listf(_("ISDN Configuration"),
- _("Which protocol do you want to use ?"),
+ _("Which protocol do you want to use?"),
sub { $_[0]{description} },
\@toto ) or return 0;
$e->{protokol};
@@ -205,7 +205,7 @@ sub isdn_ask {
$in->ask_from_list_(_("ISDN Configuration"),
_("
If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the irq and io of your card.
+If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.
"),
[ __("Continue"), __("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
$isdn->{card_type} = 'isa';
@@ -213,7 +213,7 @@ If you have a PCMCIA card, you have to know the irq and io of your card.
isdn_ask_step_2:
$e = $in->ask_from_listf(_("ISDN Configuration"),
- _("Which is your ISDN card ?"),
+ _("Which is your ISDN card?"),
sub { $_[0]{description} },
[ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1;
$e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
@@ -232,7 +232,7 @@ sub isdn_detect {
log::l("found isdn card : $isdn->{description}; vendor : $isdn->{vendor};id : $isdn->{id}; driver : $isdn->{driver}\n");
$isdn->{description} =~ s/\|/ -- /;
if ($isdn->{type} eq '') {
- isdn_ask($isdn, $netc, _("I have detected an ISDN PCI Card, but I don't know the type. Please select one PCI card on the next screen.")) or return;
+ isdn_ask($isdn, $netc, _("I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.")) or return;
} else {
isdn_detect_step_1:
$isdn->{protocol}=isdn_ask_protocol() or return;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
index cf5a75bfd..835a09e6f 100644
--- a/perl-install/network/netconnect.pm
+++ b/perl-install/network/netconnect.pm
@@ -162,7 +162,11 @@ ifdown eth0
$::Wizard_no_previous=1;
my @profiles=get_profiles();
$in->ask_from(_("Network Configuration Wizard"),
- _("Welcome to The Network Configuration Wizard\n\nWe are about to configure your internet/network connection.\nIf you don't want to use the auto detection, deselect the checkbox.\n"),
+ _("Welcome to The Network Configuration Wizard.
+
+We are about to configure your internet/network connection.
+If you don't want to use the auto detection, deselect the checkbox.
+"),
[
if_(@profiles > 1, { label => _("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
{ label => _("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
@@ -265,7 +269,7 @@ The configuration will now be applied to your system.
") . if_($::isStandalone && $in->isa('interactive_gtk'),
_("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))
: _("Problems occured during configuration.
-Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration");
+Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
if ($::isWizard) {
$::Wizard_no_previous=1;
$::Wizard_finished=1;
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
index b811b210a..60d8ffd41 100644
--- a/perl-install/network/network.pm
+++ b/perl-install/network/network.pm
@@ -290,7 +290,7 @@ sub configureNetworkIntf {
}
if ($net_device eq $intf->{DEVICE}) {
$skip and return 1;
- $text = _("WARNING: This device has been previously configured to connect to the Internet.
+ $text = _("WARNING: this device has been previously configured to connect to the Internet.
Simply accept to keep this device configured.
Modifying the fields below will override this configuration.");
}
@@ -385,7 +385,7 @@ sub miscellaneousNetwork {
_("Proxies configuration"),
[ { label => _("HTTP proxy"), val => \$u->{http_proxy} },
{ label => _("FTP proxy"), val => \$u->{ftp_proxy} },
- if_(!$no_track_net, { label => _("Track network card id (usefull for laptops)"), val => \$u->{track_network_id}, type => "bool" }),
+ if_(!$no_track_net, { label => _("Track network card id (useful for laptops)"), val => \$u->{track_network_id}, type => "bool" }),
],
complete => sub {
$u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', _("Proxy should be http://...")), return 1,0;
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
index 4d8fff949..731bd58da 100644
--- a/perl-install/network/tools.pm
+++ b/perl-install/network/tools.pm
@@ -53,7 +53,7 @@ sub ask_connect_now {
$up=connected();
}
my $m = $up ? (_("The system is now connected to Internet.") .
- if_($::isInstall, _("For Security reason, it will be disconnected now.")) ) :
+ if_($::isInstall, _("For security reason, it will be disconnected now.")) ) :
_("The system doesn't seem to be connected to internet.
Try to reconfigure your connection.");
if ($::isWizard) {
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index 155462776..a75c68cfa 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -680,7 +680,7 @@ sub add_extended {
eval { verifyPrimary($hd->{primary}) };
$@ and die
_("You have a hole in your partition table but I can't use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions");
+The only solution is to move your primary partitions to have the hole next to the extended partitions.");
}
}
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index 6d7a9302a..05c908c41 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -596,7 +596,7 @@ sub read_printer_db(;$) {
"foomatic-configure -O -q |" ||
die "Could not run foomatic-configure";
} else {
- open DBPATH, $dbpath or die "An error has occurred on $dbpath : $!";
+ open DBPATH, $dbpath or die "An error occurred on $dbpath : $!";
}
my $entry = {};
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index 0e3042c2e..82b7c11df 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -142,7 +142,7 @@ sub setup_printer_connection {
sub auto_detect {
my ($in) = @_;
{
- my $w = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
+ my $w = $in->wait_message(_("Test ports"), _("Detecting devices..."));
modules::get_alias("usb-interface") and eval { modules::load("printer"); sleep(2); };
foreach (qw(lp parport_pc parport_probe parport)) {
eval { modules::unload($_); }; #- on kernel 2.4 parport has to be unloaded to probe again
@@ -486,7 +486,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
}
# Configure and start HPOJ
my $w = $in->wait_message
- ('', _("Checking device and configuring HPOJ ..."));
+ ('', _("Checking device and configuring HPOJ..."));
$ptaldevice = printer::configure_hpoj($device, @parport);
if ($ptaldevice) {
@@ -533,7 +533,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
#- if CUPS is the spooler, make sure that CUPS knows the device
if ($printer->{SPOOLER} eq "cups") {
my $w = $in->wait_message
- ('', _("Making printer port available for CUPS ..."));
+ ('', _("Making printer port available for CUPS..."));
if ($ptaldevice eq "") {
printer::assure_device_is_available_for_cups($device);
} else {
@@ -543,7 +543,7 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
@@ -1017,10 +1017,10 @@ sub get_db_entry {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
- my $w = $in->wait_message('', _("Preparing printer database ..."));
+ my $w = $in->wait_message('', _("Preparing printer database..."));
my $queue = $printer->{OLD_QUEUE};
if ($printer->{configured}{$queue}) {
# The queue was already configured
@@ -1131,7 +1131,7 @@ sub choose_model {
$in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database ..."));
+ my $w = $in->wait_message('', _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
if (!$printer::thedb{$printer->{DBENTRY}}) {
@@ -1152,7 +1152,7 @@ sub get_printer_info {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
#if ((keys %printer::thedb) == 0) {
- # my $w = $in->wait_message('', _("Reading printer database ..."));
+ # my $w = $in->wait_message('', _("Reading printer database..."));
# printer::read_printer_db($printer->{SPOOLER});
#}
my $queue = $printer->{OLD_QUEUE};
@@ -1461,7 +1461,7 @@ sub setup_options {
push(@userinputs, $optshortdefault);
push(@widgets,
{ label => $printer->{ARGS}[$i]{'comment'} .
- " ($printer->{ARGS}[$i]{'min'} ... " .
+ " ($printer->{ARGS}[$i]{'min'}... " .
"$printer->{ARGS}[$i]{'max'})",
#type => 'range',
#min => $printer->{ARGS}[$i]{'min'},
@@ -1794,7 +1794,7 @@ sub copy_queues_from {
my $oldspoolerstr;
my $noninteractive = 0;
{
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
@oldqueues = sort(@oldqueues);
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
@@ -1867,7 +1867,7 @@ You can also type a new name or skip this printer.",
[{label => _("New printer name"),val => \$newqueue}]))) {
{
my $w = $in->wait_message('',
- _("Transferring %s ...", $oldqueue));
+ _("Transferring %s...", $oldqueue));
printer::copy_foomatic_queue($printer, $oldqueue,
$oldspooler, $newqueue) and
$queuecopied = 1;
@@ -1887,7 +1887,7 @@ You can also type a new name or skip this printer.",
}
}
if ($queuecopied) {
- my $w = $in->wait_message('', _("Refreshing printer data ..."));
+ my $w = $in->wait_message('', _("Refreshing printer data..."));
printer::read_configured_queues($printer);
}
}
@@ -1896,7 +1896,7 @@ You can also type a new name or skip this printer.",
sub start_network {
my ($in, $upNetwork) = @_;
my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Starting network ..."));
+ _("Starting network..."));
if ($::isInstall) {
return ($upNetwork and
do { my $ret = &$upNetwork();
@@ -1979,7 +1979,7 @@ _("The network access was not running and could not be started. Please check you
# interrupt print jobs.
my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Restarting printing system ..."));
+ _("Restarting printing system..."));
return printer::SIGHUP_daemon($printer->{SPOOLER});
@@ -2221,7 +2221,7 @@ sub setup_default_spooler {
printer::removelocalprintersfromapplications($printer);
# Get the queues of this spooler
{
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
printer::read_configured_queues($printer);
}
# Copy queues from former spooler
@@ -2229,7 +2229,7 @@ sub setup_default_spooler {
# Re-read the printer database (CUPS has additional drivers, PDQ
# has no raw queue)
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database ..."));
+ #my $w = $in->wait_message('', _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
}
# Save spooler choice
@@ -2239,7 +2239,7 @@ sub setup_default_spooler {
sub configure_queue {
my ($printer, $in) = @_;
- my $w = $in->wait_message('', _("Configuring printer \"%s\" ...",
+ my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
$printer->{currentqueue}{queue}));
$printer->{complete} = 1;
printer::configure_queue($printer);
@@ -2252,7 +2252,7 @@ sub install_foomatic {
(!printer::files_exist((qw(/usr/bin/foomatic-configure
/usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm)
)))) {
- my $w = $in->wait_message('', _("Installing Foomatic ..."));
+ my $w = $in->wait_message('', _("Installing Foomatic..."));
$in->do_pkgs->install('foomatic');
}
}
@@ -2318,7 +2318,7 @@ sub main {
# Get the default printer
if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
- my $w = $in->wait_message('', _("Preparing PrinterDrake ..."));
+ my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
$printer->{DEFAULT} = printer::get_default_printer($printer);
if ($printer->{DEFAULT}) {
# If a CUPS system has only remote printers and no default
@@ -2481,11 +2481,11 @@ sub main {
$::expert = !$::expert;
# Read printer database for the new user mode
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database ..."));
+ #my $w = $in->wait_message('', _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
# Re-read printer queues to switch the tree
# structure between expert/normal mode.
- my $w = $in->wait_message('', _("Reading printer data ..."));
+ my $w = $in->wait_message('', _("Reading printer data..."));
printer::read_configured_queues($printer);
$cursorpos = "::";
next;
@@ -2786,7 +2786,7 @@ What do you want to modify on this printer?",
configure_queue($printer, $in);
# Delete old queue when it was renamed
if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
- my $w = $in->wait_message('', _("Removing old printer \"%s\" ...", $printer->{OLD_QUEUE}));
+ my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
printer::remove_queue($printer, $printer->{OLD_QUEUE});
# If the default printer was renamed, correct the
# the default printer setting of the spooler
@@ -2838,7 +2838,7 @@ What do you want to modify on this printer?",
if ($in->ask_yesorno('',
_("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
{
- my $w = $in->wait_message('', _("Removing printer \"%s\" ...", $queue));
+ my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
if (printer::remove_queue($printer, $queue)) {
$editqueue = 0;
# Define a new default printer if we have