diff options
72 files changed, 1 insertions, 746 deletions
diff --git a/perl-install/install/help/help.pm b/perl-install/install/help/help.pm index 9e4e63f7a..cd76001fd 100644 --- a/perl-install/install/help/help.pm +++ b/perl-install/install/help/help.pm @@ -519,12 +519,7 @@ When a partition is selected, you can use: To get information about the different filesystem types available, please read the ext2FS chapter from the ``Reference Manual''. - -If you are installing on a PPC machine, you will want to create a small HFS -``bootstrap'' partition of at least 1MB which will be used by the yaboot -bootloader. If you opt to make the partition a bit larger, say 50MB, you -may find it a useful place to store a spare kernel and ramdisk images for -emergency boot situations.", N("Clear all"), N("Auto allocate"), N("More"), N("Save partition table"), N("Restore partition table"), N("Rescue partition table"), N("Reload partition table"), N("Removable media auto-mounting"), N("Wizard"), N("Undo"), N("Toggle between normal/expert mode"), N("Done")); +", N("Clear all"), N("Auto allocate"), N("More"), N("Save partition table"), N("Restore partition table"), N("Rescue partition table"), N("Reload partition table"), N("Removable media auto-mounting"), N("Wizard"), N("Undo"), N("Toggle between normal/expert mode"), N("Done")); } sub resizeFATChoose() { N("More than one Microsoft partition has been detected on your hard disk drive. diff --git a/perl-install/install/help/po/DrakX-help.pot b/perl-install/install/help/po/DrakX-help.pot index 444879eea..03b4d2a57 100644 --- a/perl-install/install/help/po/DrakX-help.pot +++ b/perl-install/install/help/po/DrakX-help.pot @@ -675,12 +675,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/af.po b/perl-install/install/help/po/af.po index 14e104aed..d60ba44b6 100644 --- a/perl-install/install/help/po/af.po +++ b/perl-install/install/help/po/af.po @@ -1065,12 +1065,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Nou moet u asseblief besluit watter partisie(s) u gaan gebruik vir die\n" "installasie van u Mageia rekenaar.Indien die partisies reeds\n" @@ -1136,11 +1130,6 @@ msgstr "" "Om inligting rakende die verskillende beskikbare lêerstelsels te bekom, " "lees\n" "asseblief die ext2FS hoofstuk in die \"Reference Manual\".\n" -"\n" -"Indien u op 'n PPC masjien installeer, sal u 'n klien HFS 'bootstrap'\n" -"partisie van ten minste 1MB wil skep. Dit sal deur 'yaboot' herlaai-\n" -" stelsel gebruik word. Maak dit bietjie groter vir spaar 'kernel' en\n" -"'ramdisk' beelde vir hulp in nood situasies." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/am.po b/perl-install/install/help/po/am.po index ac95b2e18..29d925ca1 100644 --- a/perl-install/install/help/po/am.po +++ b/perl-install/install/help/po/am.po @@ -671,12 +671,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/ar.po b/perl-install/install/help/po/ar.po index e4be1ed3d..9293ec99e 100644 --- a/perl-install/install/help/po/ar.po +++ b/perl-install/install/help/po/ar.po @@ -1087,12 +1087,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "عند هذه النقطة، تحتاج لاختيار أي التجزيئات ستستخدم\n" "لتثبيت نظام ماندريبا لينكس. إن كانت التجزيئات بالفعل\n" @@ -1159,13 +1153,6 @@ msgstr "" "\n" "لتحصل على معلومات حول أنواع أنظمة الملفّات المختلفة المتوفّرة، رجاءً\n" "اقرا فَصْل ext2FS من ``الدّليل المرجعي``.\n" -"\n" -"إن كنت تقوم بالتّثبيت على ماكينة PPC، ستحتاج أن تنشئ تجزيء HFS\n" -"``bootstrap`` صغير بحجم 1 ميجابايت على الأقلّ والذي سيستخدم بواسطة مُحمّل " -"الإقلاع yaboot.\n" -"إن اخترت أن تجعل التجزيء أكبر قليلاً، لنقل 50 ميجابايت، قد تجده\n" -"مفيد لتخزين نواة احتياطية وصور ramdisk من أجل\n" -"أوضاع الإقلاع الطّارئة." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/az.po b/perl-install/install/help/po/az.po index 2562ec127..e1aa2229d 100644 --- a/perl-install/install/help/po/az.po +++ b/perl-install/install/help/po/az.po @@ -1125,12 +1125,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Bu nöqtədə siz Mageia yüklənəcək bölmə(lər)i seçməlisiniz. Əgər\n" "bölmələr əvvəldən mövcuddursa (sistemdə əvvəllər qurulu olan GNU/Linuks \n" @@ -1205,12 +1199,6 @@ msgstr "" "Fərqli fayl sistem növləri haqqında daha ətraflı mə'lumat üçün, xahiş " "edirik,\n" "``Reference Manual'' kitabının ext2FS bölümünü oxuyun.\n" -"\n" -"Əgər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFS \n" -"``bootstrap'' bölməsini yaboot açılış yükləyicisi üçün seçmək " -"istəyəcəksiniz.\n" -"Əgər daha çox yeriniz varsa, məsələn 50 MB, onda bütün kernel və ramdisk \n" -"açılış əkslərinizi təcili hallar üçün burada saxlaya bilərsiniz." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/be.po b/perl-install/install/help/po/be.po index 66494c5ed..93b7b025e 100644 --- a/perl-install/install/help/po/be.po +++ b/perl-install/install/help/po/be.po @@ -671,12 +671,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/bg.po b/perl-install/install/help/po/bg.po index 90099a83f..e0c66559c 100644 --- a/perl-install/install/help/po/bg.po +++ b/perl-install/install/help/po/bg.po @@ -1009,12 +1009,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "В този момент трябва да изберете кой дялове да бъдат използвани за " "инсталация\n" @@ -1075,13 +1069,6 @@ msgstr "" " * Ctrl-d, за да изтриете дял;\n" "\n" " * Ctrl-m, за да установите точка на монтиране.\n" -"\n" -"Ако инсталите на PPC машина, сигурно ще искате да създадете малък HFS\n" -"\"bootstrap\" дял от поне 1 МБ, който ще бъде използват от boot loader-ът\n" -"yaboot. Ако смятате да направите дяла по-голям, например 50 МБ, можете да " -"го\n" -"намерите за полезно място, където да съхранявате някое ядро или image на\n" -"ramdisk в случай на извънредни ситуации." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/bn.po b/perl-install/install/help/po/bn.po index d6a350751..6792e28f0 100644 --- a/perl-install/install/help/po/bn.po +++ b/perl-install/install/help/po/bn.po @@ -912,12 +912,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "এই সময়ে আপনাকে Mageia যে পার্টিশনে ইনস্টল হবে তা নির্বাচন\n" "করতে হবে। যদি আগে থেকেই পার্টিশন তৈরী থাকে, (GNU/Linux এর পুর্বের\n" @@ -980,12 +974,6 @@ msgstr "" "\n" "বিদ্যমান ফাইল সিস্টেমের ধরন সম্পর্কে জানতে হলে \"Reference Manual\" এর\n" "ext2FS অধ্যায়টি পড়ুন।\n" -"\n" -"আপনি যদি PPC মেশিনে ইনস্টল করেন, তাহলে আপনাকে yaboot বুটলোডারের\n" -"ব্যবহারের জন্য একটি ছোট অন্তত ১ এমবি এর HFS \"বুটস্ট্র্যাপ\" পার্টিশন তৈরী করতে " -"হবে।\n" -"আপনি যদি পার্টিশনটি আরও বড় করতে চান, যেমন ৫০ MB, আপনি কোন জরুরী বুট সমস্যার\n" -"জন্য একটি আলাদা কার্নেল এবং ramdisk তৈরী করে এই পার্টিশনে রাখতে পারেন।" #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/br.po b/perl-install/install/help/po/br.po index 5e74dab04..67f4f29f5 100644 --- a/perl-install/install/help/po/br.po +++ b/perl-install/install/help/po/br.po @@ -681,12 +681,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/bs.po b/perl-install/install/help/po/bs.po index 11083dce1..71beea29f 100644 --- a/perl-install/install/help/po/bs.po +++ b/perl-install/install/help/po/bs.po @@ -1111,12 +1111,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Sada trebate izabrati koje particije želite koristiti za instalaciju vašeg\n" "Mageia sistema. Ako su particije već definisane, iz prijašnje\n" @@ -1184,12 +1178,6 @@ msgstr "" "\n" "Da biste dobili informacije o raznim tipovima datotečnog sistema koji\n" "su dostupni, pročitajte poglavlje o ext2FS iz ''Referentnog priručnika''.\n" -"\n" -"Ako instalirate na PPC računar, trebate napraviti malu HFS ''bootstrap''\n" -"particiju od najmanje 1 MB koju će koristiti yaboot bootloader. Ako se\n" -"odlučite da ovu particiju učinite nešto većom, npr. 50 MB, primjetićete\n" -"da je ona korisno mjesto za čuvanje rezervnog kernela ili ramdisk slika\n" -"za hitne slučajeve." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ca.po b/perl-install/install/help/po/ca.po index dbc56c2af..34b04b583 100644 --- a/perl-install/install/help/po/ca.po +++ b/perl-install/install/help/po/ca.po @@ -1141,12 +1141,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n" "instal·lar el sistema Mageia. Si ja s'han definit les particions\n" @@ -1217,12 +1211,6 @@ msgstr "" "\n" "Per a més informació sobre els diversos sistemes de fitxers disponibles,\n" "llegiu el capítol sobre ext2FS del «Manual de Referència».\n" -"\n" -"Si esteu fent la instal·lació en un ordinador PPC, voldreu crear una\n" -"petita partició «bootstrap» HFS d'un mínim d'1 MB per a ús del carregador\n" -"d'arrencada yaboot. Si decidiu fer-la una mica més gran, per exemple de\n" -"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i imatges\n" -"del disc RAM per a situacions d'emergència durant l'arrencada." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/cs.po b/perl-install/install/help/po/cs.po index e41461edf..740195812 100644 --- a/perl-install/install/help/po/cs.po +++ b/perl-install/install/help/po/cs.po @@ -1101,12 +1101,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "V této chvíli je potřeba určit, který(é) oddíl(y) budou použity pro " "instalaci\n" @@ -1176,12 +1170,6 @@ msgstr "" "\n" "Více informací o jednotlivých druzích souborových systémů naleznete\n" "v kapitole o ext2fs v \"Referenční příručce\".\n" -"\n" -"Pokud instalujete na počítač PPC, je potřeba vytvořit malý oddíl HFS,\n" -"tzv. \"bootstrap\" o minimální velikosti 1MB, který bude použit pro zavaděč\n" -"Yaboot. Pokud vytvoříte tento oddíl větší, např. 50 MB, je to dobré místo " -"pro\n" -"uložení ramdisku a jádra pro situace záchrany disku." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/cy.po b/perl-install/install/help/po/cy.po index f93f3cadc..ef4021ac5 100644 --- a/perl-install/install/help/po/cy.po +++ b/perl-install/install/help/po/cy.po @@ -1062,12 +1062,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n" "eich system Mageia. Os oes rhaniadau wedi eu diffinio eisoes, un\n" @@ -1131,14 +1125,6 @@ msgstr "" "I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch " "y\n" " pennawd ar ext2fs yn y ``Reference Manual''.\n" -"\n" -"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" \n" -" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr " -"yaboot.\n" -"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n" -"gall fod yn le defnyddiol i gadw cnewyllyn sbâr a delweddau ramdisk ar " -"gyfer\n" -" sefyllfaoedd cychwyn argyfyngus!" #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/da.po b/perl-install/install/help/po/da.po index eba796401..c27e29875 100644 --- a/perl-install/install/help/po/da.po +++ b/perl-install/install/help/po/da.po @@ -1089,12 +1089,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Nu skal du vælge hvilke partitioner som skal bruges til installering af dit " "Mageia system. Hvis partitionerne allerede er blevet defineret, " @@ -1159,12 +1153,6 @@ msgstr "" "\n" "For at få information om de forskellige tilgængelige filsystemstyper kan du " "læse kapitlet ext2fs i 'Referencemanualen'.\n" -"\n" -"Hvis du er i gang med at installere på en PPC-maskine skal du lave en lille " -"HFS-'bootstrap'-partition på mindst 1 MB til Yaboot-systemstarteren. Hvis du " -"vælger at lave partitionen en smule større, f.eks. 50 MB kan den være nyttig " -"til at gemme en ekstra kerne og ramdisk-billede for nødsituationer ved " -"opstart." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/de.po b/perl-install/install/help/po/de.po index 4e81a39c4..42339416e 100644 --- a/perl-install/install/help/po/de.po +++ b/perl-install/install/help/po/de.po @@ -1133,12 +1133,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Sie müssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandriva\n" "Linux System installiert werden soll. Falls bereits Partitionen existieren\n" @@ -1209,13 +1203,6 @@ msgstr "" "\n" "Um mehr Informationen über die verschiedenen Dateisystemtypen zu erhalten,\n" "lesen Sie bitte das Kapitel ext2FS in der „Referenz“.\n" -"\n" -"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n" -"eine mindestens 1MB, große HFS Start-Partition für den\n" -"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n" -"größer dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n" -"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n" -"können." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/el.po b/perl-install/install/help/po/el.po index 40794d802..a01ddc708 100644 --- a/perl-install/install/help/po/el.po +++ b/perl-install/install/help/po/el.po @@ -1071,12 +1071,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "\n" " Linux\n" diff --git a/perl-install/install/help/po/eo.po b/perl-install/install/help/po/eo.po index e2e006b72..8cc2a518c 100644 --- a/perl-install/install/help/po/eo.po +++ b/perl-install/install/help/po/eo.po @@ -1135,12 +1135,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Nun vi devas elekti kiuj subdisko(j) estu uzata(j) por instalado\n" "de via Mandriva-Linuksa sistemo. Se jam estas difinitaj subdiskoj,\n" @@ -1207,13 +1201,6 @@ msgstr "" "\n" "Por akiri informojn pri la diversaj haveblaj dosier-sistem-tipoj, bonvolu\n" "legi la ĉapitron ext2FS en la ''Referenca Manlibro''.\n" -"\n" -"Se vi instalas sur PPC-maŝinon, vi deziros krei malgrandan HFS-\n" -"''praŝargo''-subdiskon de almenaŭ 1 MB kiu uzotas de la yaboot-\n" -"startigilo. Se vi volas iomete pligrandigi tiun subdiskon, ni diru 50 MB, " -"vi\n" -"povas ankaŭ uzi ĝin por stoki tie kromajn kerno- kaj ramdisk-bildojn por\n" -"paneaj situacioj de startigo." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/es.po b/perl-install/install/help/po/es.po index c8cd692bf..c78a98fc1 100644 --- a/perl-install/install/help/po/es.po +++ b/perl-install/install/help/po/es.po @@ -1155,12 +1155,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Ahora necesita elegir qué particiones se utilizarán para la instalación de\n" "su sistema Mageia. Si ya se han definido particiones, ya sea por\n" @@ -1233,12 +1227,6 @@ msgstr "" "Para obtener información sobre los distintos tipos de sistemas de archivos\n" "disponibles, por favor lea el capítulo acerca de ext2FS del \"Manual de\n" "Referencia\".\n" -"\n" -"Si está instalando en una máquina PPC, querrá crear una pequeña partición\n" -"HFS de \"bootstrap\" de al menos 1 MB que será utilizada por el cargador de\n" -"arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n" -"50 MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n" -"alternativos para arrancar en situaciones de emergencia." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/et.po b/perl-install/install/help/po/et.po index 38e5c9510..826f8c411 100644 --- a/perl-install/install/help/po/et.po +++ b/perl-install/install/help/po/et.po @@ -1111,12 +1111,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Nüüd peate valima partitsiooni(d), kuhu soovite Mageiai paigaldada.\n" "Kui need on juba olemas kas GNU/Linuxi varasema paigalduse või mõne muu\n" @@ -1188,12 +1182,6 @@ msgstr "" "\n" "Lähemat infot erinevate failisüsteemitüüpide kohta leiab \"Süvateadmiste\n" "käsiraamatu\" (\"Reference Manual\") peatükist \"Linuxi failisüsteem\".\n" -"\n" -"Kui paigaldamine toimub PPC-masinas, tuleks luua vähemalt 1MB suurune\n" -"väike HFS \"bootstrap\"-partitsioon, mida kasutab alglaadur yaboot. Kui Te\n" -"aga teete selle partitsiooni natukene suuremaks (näiteks nii umbes 50MB),\n" -"on see päris hea koht, kuhu hädaolukorraks paigutada tagavarakernel\n" -"ja ramdisk-laadepildid." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/eu.po b/perl-install/install/help/po/eu.po index 949aa45ba..bc56761c7 100644 --- a/perl-install/install/help/po/eu.po +++ b/perl-install/install/help/po/eu.po @@ -1132,12 +1132,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Orain, Mageia sistema instalatzeko zein partizio erabiliko\n" "d(ir)en aukeratu behar duzu. Partizioak jadanik definituta badaude,\n" @@ -1209,12 +1203,6 @@ msgstr "" "\n" "Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa\n" "lortzeko, irakurri ``Erreferentzia Eskuliburuko'' ext2FS kapitulua.\n" -"\n" -"PPC makina batean instalatu behar baduzu, gutxienez 1 Mbko HFS\n" -"``bootstrap'' partizio txiki bat sortzea komeni zaizu, yaboot\n" -"abioko kargatzaileak erabil dezan. Partizioa handixeagoa egitea hautatzen \n" -"baduzu, adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat\n" -"eta ramdisk imajinak biltegiratzeko emergentziazko abioa egin ahal izateko." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/fa.po b/perl-install/install/help/po/fa.po index 5b735b028..49ac20002 100644 --- a/perl-install/install/help/po/fa.po +++ b/perl-install/install/help/po/fa.po @@ -1099,12 +1099,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "در این نقطه، شما مجبور به انتخاب قسمتبندی(های) که برای نصب سیستم لینوکس \n" "ماندریبا استفاده خواهد شد هستید.اگر قسمتبندیهایی که یا از یک نصب قبلی \n" @@ -1171,12 +1165,6 @@ msgstr "" "\n" "برای دریافت اطلاعات درباره انواع سیستم پرونده موجود، لطفاً فصل ext2FS \n" "را از ` دستورالعمل مرجع'' بخوانید.\n" -"\n" -"اگر شما بر یک ماشین PPC نصب میکنید، شما باید یک قسمتبندی کوچک HFS \n" -"``bootstrap'' حداقل ۱ مگابایت که برای بارگذار آغازگر yaboot\n" -"استفاده میشود را ایجاد کنید اگر شما بطور اختیاری آن قسمتبندی را بزرگتر\n" -"بسازید، مثلاً ۵۰ مگابایت، شما آن را برای انبار یک هسته یدک و تصاویر ramdisk\n" -"در شرایط آغازگری اضطراری مفید خواهید یافت." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/fi.po b/perl-install/install/help/po/fi.po index b16291e0e..569e24b25 100644 --- a/perl-install/install/help/po/fi.po +++ b/perl-install/install/help/po/fi.po @@ -1092,12 +1092,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Tässä vaiheessa sinun pitää määrittää mitkä osiot käytetään Mageia\n" "-järjestelmäsi asennuksessa. Jos osioita on jo määritelty, joko\n" @@ -1164,12 +1158,6 @@ msgstr "" "\n" "Saadaksesi lisätietoja käytettävissä olevista tiedostojärjestelmistä,\n" "lue lisää ``Reference Manual'':sta osasta ext2FS.\n" -"\n" -"Jos olet asentamassa PPC-koneelle, sinun pitää luoda pieni HFS\n" -"``bootstrap''-osio kooltaan vähintään 1Mt, joka tulee Yaboot\n" -"käynnistyslataajan käyttöön. Jos päätät tehdä osiosta vähän suuremman,\n" -"esim. 50Mt, on hyvä ajatus asentaa ylimääräinen ydin ja ramdisk-kuva\n" -"virhetilanteiden käynnistystarpeeseen." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/fr.po b/perl-install/install/help/po/fr.po index 41e82ebc7..2b3720da6 100644 --- a/perl-install/install/help/po/fr.po +++ b/perl-install/install/help/po/fr.po @@ -1208,12 +1208,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "À cette étape, vous devez sélectionner quelle partition sera utilisée pour\n" "votre système Mageia. Si votre disque est déjà partitionné, soit par\n" @@ -1287,12 +1281,6 @@ msgstr "" "lire\n" "le chapitre sur le système de fichier ext2FS dans le « Manuel de\n" "Référence ».\n" -"\n" -"Si vous faites une installation sur un poste PPC, vous devrez créer une\n" -"petite partition HFS « bootstrap » d'au moins 1 Mo qui sera utilisée par le\n" -"chargeur de démarrage (« bootloader ») yaboot. Si vous optez pour une\n" -"partition plus grande, disons 50Mo, vous trouverez utile d'y placer des\n" -"noyaux et des images « ramdisk » accessibles en cas de problème." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/fur.po b/perl-install/install/help/po/fur.po index 189a0a0a5..0eccb3dde 100644 --- a/perl-install/install/help/po/fur.po +++ b/perl-install/install/help/po/fur.po @@ -673,12 +673,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/ga.po b/perl-install/install/help/po/ga.po index 5ec9220eb..668cfaf7e 100644 --- a/perl-install/install/help/po/ga.po +++ b/perl-install/install/help/po/ga.po @@ -670,12 +670,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/gl.po b/perl-install/install/help/po/gl.po index 79df1441a..5d3c66267 100644 --- a/perl-install/install/help/po/gl.po +++ b/perl-install/install/help/po/gl.po @@ -1100,12 +1100,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Neste punto cómpre que escolla que partición(s) se van usar para a\n" "instalación do seu sistema Mageia. Se as particións xa se\n" @@ -1174,13 +1168,6 @@ msgstr "" "\n" "Para obter información sobre os diferentes tipos de sistemas de ficheiros\n" "dispoñibles, lea o capítulo sobre ext2FS do ``Manual de Referencia''.\n" -"\n" -"Se está instalando nunha máquina PPC, quererá crear unha pequena\n" -"partición HFS para ``bootstrap'' de como mínimo 1MB a cal vai ser usada\n" -"polo cargador de arrinque yaboot. Se opta por facer a partición un pouco\n" -"máis grande, digamos de 50MB, podería darse conta de que é un sitio útil\n" -"para almacenar un kernel de reserva e imaxes ramdisk para situacións de\n" -"arrinques de emerxencia." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/he.po b/perl-install/install/help/po/he.po index 71becdebf..3bb587b16 100644 --- a/perl-install/install/help/po/he.po +++ b/perl-install/install/help/po/he.po @@ -1087,12 +1087,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "בשלב זה, עליך לבחור היכן תותקן מערכת מנדריבה לינוקס בכונן הקשיח\n" "שלך. אם כבר הוגדרו מחיצותמתאימות, בין אם על ידי התקנה קודמת\n" diff --git a/perl-install/install/help/po/hi.po b/perl-install/install/help/po/hi.po index a11b07d41..49e45377a 100644 --- a/perl-install/install/help/po/hi.po +++ b/perl-install/install/help/po/hi.po @@ -959,12 +959,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/hr.po b/perl-install/install/help/po/hr.po index 3af796f2c..79365c221 100644 --- a/perl-install/install/help/po/hr.po +++ b/perl-install/install/help/po/hr.po @@ -1066,12 +1066,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "U ovoj točki instalacije, trebate izabrati koje partiticije ćete koristiti " "za\n" @@ -1135,12 +1129,6 @@ msgstr "" "\n" "Za informacije o raznim dostupnim datotečnim sustavima, pročitajte ext2fs\n" "poglavlje u ``Reference Manual''\n" -"\n" -"Ukoliko instalirate na PPC računalo, željet ćete napraviti malu HFS\n" -"'bootstrap' particiju od najmanje 1MB koju će koristiti\n" -"yaboot bootloader. Ukoliko se odlučite za pravljenje malo veće \n" -"particije, recimo 50MB, možete ju pronaći korisnom za stavljanje\n" -"dodatnog kernela i ramdisk slike u slučaju nužde." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/hu.po b/perl-install/install/help/po/hu.po index 5cb60a73e..fa9cb7a3d 100644 --- a/perl-install/install/help/po/hu.po +++ b/perl-install/install/help/po/hu.po @@ -1113,12 +1113,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Ebben a lépésben kell kiválasztani a Mageia rendszer telepítéséhez\n" "használni kívánt partíciókat. Ha a kívánt partíciók már létre lettek hozva\n" diff --git a/perl-install/install/help/po/id.po b/perl-install/install/help/po/id.po index e098a39ba..3b764e3fc 100644 --- a/perl-install/install/help/po/id.po +++ b/perl-install/install/help/po/id.po @@ -1157,12 +1157,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Saat ini, Anda harus memilih partisi yang akan digunakan untuk installasi\n" "sistem Mageia Anda. Jika partisi telah didefinisikan, baik dari\n" @@ -1228,11 +1222,6 @@ msgstr "" "\n" "Untuk mendapatkan informasi tentang jenis sistem file yang ada, \n" "silahkan membaca bab ext2FS dari ``Referensi Manual''.\n" -"\n" -"Jika Anda menginstall pada komputer PPC, Anda harus membuat partisi\n" -"``bootstrap'' HFS kecil paling tidak 1 MB yang akan digunakan oleh\n" -"bootloader yaboot. Jika Anda membuatnya lebih besar, misalkan 50MB\n" -"Anda bisa menyimpan kernel dan citra ramdisk untuk situasi darurat." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/is.po b/perl-install/install/help/po/is.po index 9555ff79e..4a03a68d4 100644 --- a/perl-install/install/help/po/is.po +++ b/perl-install/install/help/po/is.po @@ -1100,12 +1100,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Hér þarft þú að ákveða hvaða disksneið þú vilt nota fyrir Mageia\n" "stýrikerfið. Ef disksneiðar hafa þegar verið skilgreindar, annað hvort\n" @@ -1171,12 +1165,6 @@ msgstr "" "\n" "Til að fá upplýsingar um mismunandi skráakerfi, vinsamlega lestu\n" "kaflann um ext2FS í ``Reference Manual''.\n" -"\n" -"Ef þú ert að setja upp á PPC tölvu, þá ættir þú að búa til litla HFS\n" -"``ræsi-disksneið'' sem er að minnsta kosti 1M. Þessi disksneið\n" -"verður notuð af yaboot ræsistjóranum. Ef þú gerir disksneiðina\n" -"svolítið stærri t.d. 50MB þá er það góður staður til að geyma auka\n" -"kjarna og ræsidisk-ímyndir fyrir óvæntar uppákomur." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/it.po b/perl-install/install/help/po/it.po index bd1863de0..85a74763c 100644 --- a/perl-install/install/help/po/it.po +++ b/perl-install/install/help/po/it.po @@ -1170,12 +1170,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "A questo punto, dovete decidere quali partizioni devono essere usate per\n" "l'installazione del vostro sistema Mageia. Se sono già state\n" @@ -1249,13 +1243,6 @@ msgstr "" "\n" "Per ulteriori informazioni in merito ai diversi tipi di filesystem\n" "disponibili, consultate il capitolo ext2FS del ''Manuale di riferimento''.\n" -"\n" -"Se state effettuando l'installazione su una macchina PPC, sarà meglio\n" -"creare una piccola partizione HFS di ''bootstrap'' di almeno 1 MB, che\n" -"verrà utilizzata dal bootloader yaboot. Se decidete di creare una\n" -"partizione più grande, diciamo sui 50 MB, essa potrebbe rappresentare un\n" -"utile deposito in cui conservare un kernel di riserva e immagini di avvio\n" -"da utilizzare in caso di emergenza." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ja.po b/perl-install/install/help/po/ja.po index 49ce74933..c5156f17e 100644 --- a/perl-install/install/help/po/ja.po +++ b/perl-install/install/help/po/ja.po @@ -1051,12 +1051,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "ここでは Mageia をインストールするパーティションを選びます。\n" "以前にインストールした GNU/Linux システムが残っていたり、別のツールを\n" @@ -1122,11 +1116,6 @@ msgstr "" "\n" "使用可能な他のファイルシステムについては、Reference Manual の\n" "'ext2FS' の章をお読みください。\n" -"\n" -"PPC マシンにインストールする場合は最低 1 MB の HFS bootstrap \n" -"パーティションを作成してください。yaboot ブートローダが使用します。\n" -"このパーティションをもう少し大きくしておくと (例えば 50 MB くらい)、\n" -"スペアカーネルや緊急ブート用の ramdisk イメージを保存するのに利用できます。" #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ko.po b/perl-install/install/help/po/ko.po index 6c22306f9..66d2d6fa6 100644 --- a/perl-install/install/help/po/ko.po +++ b/perl-install/install/help/po/ko.po @@ -907,12 +907,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "이제 어느 파티션이 맨드리바 리눅스의 설치용으로 사용되어야 할지를\n" "선택해야 합니다. 이전에 다른 GNU/리눅스를 설치한 적이 있거나, 다른 파티션\n" @@ -965,13 +959,6 @@ msgstr "" " ○ 「Ctrl + d」: 파티션 삭제하기.\n" "\n" " ○ 「Ctrl + m」: 마운트 위치 지정하기.\n" -"\n" -"만약 PPC 컴퓨터에서 설치하고 있는 중이라면, YABOOT 부트로더가 사용할 최소 " -"1MB\n" -"의 HFS 「부트스트랩」파티션을 만들 필요가 있습니다. 만약 그 파티션을 보다 크" -"게\n" -"(가령, 50MB) 만들면, 응급 상황시에 사용할 여분의 커널과 램디스크 이미지를\n" -"저장할 수 있는 유용한 장소가 될 것입니다." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ky.po b/perl-install/install/help/po/ky.po index f41fd4517..4095d7fc7 100644 --- a/perl-install/install/help/po/ky.po +++ b/perl-install/install/help/po/ky.po @@ -1092,12 +1092,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/lt.po b/perl-install/install/help/po/lt.po index 0753b4658..a0eb3d4d1 100644 --- a/perl-install/install/help/po/lt.po +++ b/perl-install/install/help/po/lt.po @@ -815,12 +815,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandriva " "Linux \n" diff --git a/perl-install/install/help/po/ltg.po b/perl-install/install/help/po/ltg.po index 3ce74efdf..e22bf2b82 100644 --- a/perl-install/install/help/po/ltg.po +++ b/perl-install/install/help/po/ltg.po @@ -819,12 +819,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Pašlaik jums ir jāizvēlas, kurā(s) diska sadaļā(s) instalēt Mageia\n" "operētājsistēmu. Ja sadaļas jau ir izveidotas (agrākas GNU/Linux " diff --git a/perl-install/install/help/po/lv.po b/perl-install/install/help/po/lv.po index ec450f37b..d72c6c95b 100644 --- a/perl-install/install/help/po/lv.po +++ b/perl-install/install/help/po/lv.po @@ -818,12 +818,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Pašlaik jums ir jāizvēlas, kurā(s) diska sadaļā(s) instalēt Mageia\n" "operētājsistēmu. Ja sadaļas jau ir izveidotas (agrākas GNU/Linux " diff --git a/perl-install/install/help/po/mk.po b/perl-install/install/help/po/mk.po index 1d31fdd61..64497c096 100644 --- a/perl-install/install/help/po/mk.po +++ b/perl-install/install/help/po/mk.po @@ -1158,12 +1158,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Во овој момент треба да изберете која партициja или партиции ќе ги користите " "за\n" @@ -1233,15 +1227,6 @@ msgstr "" "\n" "За да добиете информации за различните типови на датотечни системи,\n" "прочитајте го одделот за „ext2FS“ од „Упатство за употреба“.\n" -"\n" -"Ако инсталирате на „PPC“ машина, ќе сакате да создадете мала „HFS " -"bootstrap“\n" -"партиција од барем 1МБ, која ќе се користи од подигнувачот „yaboot“. Ако " -"сакате\n" -"да ја направите партицијата малку поголема, на пример 50МБ, тоа може да " -"биде\n" -"корисно како место за чување резервен кернел и „ramdisk“ слики за итни " -"случаи." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/mn.po b/perl-install/install/help/po/mn.po index 107978083..aadaf6068 100644 --- a/perl-install/install/help/po/mn.po +++ b/perl-install/install/help/po/mn.po @@ -716,12 +716,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/ms.po b/perl-install/install/help/po/ms.po index 88b8a0048..f54fbca60 100644 --- a/perl-install/install/help/po/ms.po +++ b/perl-install/install/help/po/ms.po @@ -723,12 +723,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "on dan on\n" " on\n" diff --git a/perl-install/install/help/po/mt.po b/perl-install/install/help/po/mt.po index 03e248f33..bd80fa04f 100644 --- a/perl-install/install/help/po/mt.po +++ b/perl-install/install/help/po/mt.po @@ -1079,12 +1079,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "F'dan il-punt trid tagħżel liema partizzjoni(jiet) se jintużaw għall-\n" "installazzjoni tas-sistema Mageia. Jekk diġà ġew definiti xi\n" @@ -1154,11 +1148,6 @@ msgstr "" "\n" "Biex tikseb iżjed informazzjoni dwar il-filesystems differenti disponibbli,\n" "jekk jogħġbok aqra l-kapitlu ext2fs fil-Manwal ta' Referenza.\n" -"\n" -"Jekk qed tinstalla fuq kompjuter PPC, tkun trid toħloq partizzjoni żgħira\n" -"HFS \"bootstrap\", ta' l-inqas 1MB, li tintuża mill-bootloader yaboot. Jekk\n" -"tiddeċiedi li tagħmlu ftit ikbar, ngħidu aħna 50MB, tista' ssibu post utli\n" -"fejn tqiegħed kernel u ramdisk \"spare\" għal emerġenzi." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/nb.po b/perl-install/install/help/po/nb.po index 272d8a84e..4cb16ef56 100644 --- a/perl-install/install/help/po/nb.po +++ b/perl-install/install/help/po/nb.po @@ -1158,12 +1158,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "På dette punktet må du velge hvilke partisjon(er) som skal brukes til å\n" "installere ditt nye Mageia-system på. Hvis partisjoner allerede har\n" @@ -1238,12 +1232,6 @@ msgstr "" "\n" "For å få informasjon om de forskjellige filsystemene som er tilgjengelige,\n" "vennlist les ext2FS-kapittelet fra ``Reference Manual''.\n" -"\n" -"Hvis du installerer på en PPC-maskin, så vil du nok lage en liten\n" -"HFS-'bootstrap-partisjon' på minst en megabyte for bruk av\n" -"yaboot-oppstartslasteren. Hvis du ønsker å lage partisjonen litt større,\n" -"la oss si 50 MB, så kan du lagre en ekstra kjerne og ramdiskbilde for " -"nødsituasjoner." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/nl.po b/perl-install/install/help/po/nl.po index c11ed5dca..c2d9aef98 100644 --- a/perl-install/install/help/po/nl.po +++ b/perl-install/install/help/po/nl.po @@ -1122,12 +1122,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Op dit punt dient u te kiezen welke partitie(s) gebruikt zullen worden voor\n" "de installatie van uw Mageia systeem. Indien er reeds partities\n" @@ -1197,12 +1191,6 @@ msgstr "" "\n" "Voor meer informatie over de verschillende types bestandssystemen die er zijn,\n" "leest u het hoofdstuk 'ext2FS' van de ``Referentiehandleiding''.\n" -"\n" -"In het geval dat u op een PPC computer aan het installeren bent, zult u een kleine\n" -"HFS \"bootstrap\"-partitie van tenminste 1MB willen creëren voor gebruik\n" -"door de yaboot-opstartlader. Indien u liever de partitie wat groter maakt,\n" -"zeg 50MB, dan vindt u het misschien een nuttige plek om een reserve kernel-\n" -"en ramdisk beeldbestand in op te slaan voor opstart-noodgevallen." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/nn.po b/perl-install/install/help/po/nn.po index fcef7438d..c5f10b9c3 100644 --- a/perl-install/install/help/po/nn.po +++ b/perl-install/install/help/po/nn.po @@ -1086,12 +1086,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "No må du velja kva partisjonar du vil installera Mageia på. Om du " "allereie har ferdige partisjonar, frå tidlegare installasjonar av GNU/Linux " @@ -1153,11 +1147,6 @@ msgstr "" "\n" "Du kan lesa meir om forskjellige filsystem i kapittelet «ext2FS» i " "referansehandboka.\n" -"\n" -"Om du installerer på ei PPC-maskin, bør du laga ein liten HFS-" -"oppstartslastarpartisjon på minst 1 MiB for yaboot. Vis du lagar partisjonen " -"større, kanskje 50 MiB, kan du bruka han til å lagra ein ekstra kjerne, og " -"eventuelt ramdisk-bilete for nødsituasjonar.r" #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/pa_IN.po b/perl-install/install/help/po/pa_IN.po index 8e3ad9b0b..1323b9c9b 100644 --- a/perl-install/install/help/po/pa_IN.po +++ b/perl-install/install/help/po/pa_IN.po @@ -704,12 +704,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/pl.po b/perl-install/install/help/po/pl.po index cc60eee65..5d9e6fbac 100644 --- a/perl-install/install/help/po/pl.po +++ b/perl-install/install/help/po/pl.po @@ -1117,12 +1117,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "W tym etapie instalacji wybierasz partycje, na których będzie instalowany\n" "Mageia. Jeśli partycje istnieją (np. pozostały po poprzedniej " @@ -1193,15 +1187,6 @@ msgstr "" "\n" "Aby uzyskać informacje dotyczące różnych dostępnych rodzajów systemów\n" "plików, należy przeczytać rozdział ext2fs podręcznika.\n" -"\n" -"Jeśli instalacja odbywa się na komputerze PPC, system będzie wymagał\n" -"utworzenia małej partycji HFS \"rozruchowej\" (bootstrap) o wielkości\n" -"co najmniej 1MB, która będzie używana przez program rozruchowy yaboot.\n" -"Jeśli chcesz, aby ta partycja była większa, powiedzmy 50 MB, można\n" -"ją traktować jako użyteczne miejsce np. do przechowywania zapasowego\n" -"jądra oraz obrazów do uniknięcia skutków ewentualnych awarii " -"uniemożliwiających\n" -"rozruch systemu z normalnej partycji." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/pt.po b/perl-install/install/help/po/pt.po index e959247b8..b104bc14e 100644 --- a/perl-install/install/help/po/pt.po +++ b/perl-install/install/help/po/pt.po @@ -1110,12 +1110,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Neste fase, precisa escolher que partições vão ser utilizadas para a\n" "instalação do seu sistema Mageia. Se já foram definidas partições,\n" @@ -1183,12 +1177,6 @@ msgstr "" "Para obter mais informações acerca dos diferentes tipos de sistemas de\n" "ficheiros disponíveis, por favor leia o capítulo ext2FS do ``Manual de\n" "Referência''.\n" -"\n" -"Se está a instalar numa máquina PPC, irá querer criar umas pequena partição\n" -"de arranque HFS com pelo menos 1MB, que será usada pelo carregador de\n" -"arranque yaboot. Se optar por criar uma partição maior, tipo 50MB, pode-lhe\n" -"ser útil para gravar um kernel e a uma imagem ramdisk para situações de\n" -"de emergência." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/pt_BR.po b/perl-install/install/help/po/pt_BR.po index 9963f2803..56835bdc0 100644 --- a/perl-install/install/help/po/pt_BR.po +++ b/perl-install/install/help/po/pt_BR.po @@ -1150,12 +1150,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Agora você precisa escolher qual(is) partição(ões) serão usadas para " "instalar o\n" @@ -1227,12 +1221,6 @@ msgstr "" "Para mais informações sobre os diferentes tipos de sistemas de arquivos \n" "disponíveis, por favor, leia o capítulo sobre ext2FS do \"Manual de " "Referência\".\n" -"\n" -"Se você está instalando em uma Máquina PPC, você vai precisar criar uma\n" -"pequena partição \"bootstrap\" HFS de no mínimo 1MB para usar com o \n" -"gerenciador de boot yaboot. Se você quiser criar uma partição um\n" -"pouco maior, digamos 50MB, você pode usar o espaço para guardar\n" -"um kernel extra e uma imagem ramdisk para situações de emergência." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ro.po b/perl-install/install/help/po/ro.po index 921154f51..4fce800c5 100644 --- a/perl-install/install/help/po/ro.po +++ b/perl-install/install/help/po/ro.po @@ -677,12 +677,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/ru.po b/perl-install/install/help/po/ru.po index 1b2fd25b9..98528eefd 100644 --- a/perl-install/install/help/po/ru.po +++ b/perl-install/install/help/po/ru.po @@ -1112,12 +1112,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Здесь вам предложат выбрать, какие разделы будут использоваться для\n" "установки вашей системы Mageia. Если разделы были уже определены\n" @@ -1185,12 +1179,6 @@ msgstr "" "\n" "Чтобы получить информацию о различных доступных файловых системах,\n" "пожалуйста почитайте главу ext2FS из книги ``Справочное руководство''.\n" -"\n" -"Если вы производите инсталляцию на PPC машину, вам потребуется создать\n" -"маленький HFS ``bootstrap'' раздел, не больше 1MB, который будет\n" -"использоваться загрузчиком yaboot. Если вы решите сделать раздел чуть\n" -"больше, скажем 50MB, то вы найдете полезное место для хранения spare kernel\n" -"и ramdisk образов для загрузки в аварийных ситуациях." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sc.po b/perl-install/install/help/po/sc.po index 45efd0569..85f4bf130 100644 --- a/perl-install/install/help/po/sc.po +++ b/perl-install/install/help/po/sc.po @@ -673,12 +673,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/sk.po b/perl-install/install/help/po/sk.po index ec2d0c9ce..2d245d2c0 100644 --- a/perl-install/install/help/po/sk.po +++ b/perl-install/install/help/po/sk.po @@ -1135,12 +1135,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Na tomto mieste je potrebné aby ste si vybrali oblasti, ktoré budú použité\n" "na inštaláciu Mageiau. Ak už boli oddiely definované,\n" @@ -1217,13 +1211,6 @@ msgstr "" "Pre získanie informácií o iných súborových systémoch, ktoré sú dostupné, " "prečítajte\n" "si ext2FS kapitolu z ``Referenčnej príručky''.\n" -"\n" -"Ak prevádzate inštaláciu na PPC hardvéri, budete zrejme chcieť vytvoriť malý " -"HFS\n" -"``bootstrap'' oddiel veľký aspoň 1MB, ktorý bude môcť používať yaboot\n" -"zavádzač. Ak sa rozhodnete vytvoriť tento oddiel väčší, povedzme 50MB, môže\n" -"to byť vhodné miesto pre uloženie jadra a obrazov ramdisku pre výnimočné\n" -"situácie, ktoré môžu nastať." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sl.po b/perl-install/install/help/po/sl.po index ed41d7c41..2e7c1a47a 100644 --- a/perl-install/install/help/po/sl.po +++ b/perl-install/install/help/po/sl.po @@ -1100,12 +1100,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Izbrati morate razdelke, na katere boste namestili sistem\n" "Mageia. Če ste razdelke že izbrali ob kakšni predhodni\n" @@ -1170,12 +1164,6 @@ msgstr "" "\n" "Vse nadaljnje informacije o datotečnih sistemih boste našli v\n" "dokumentaciji.\n" -"\n" -"Če distribucijo Mageia nameščate na PPC računalnik, morate ustvariti\n" -"zagonski »bootstrap« razdelek z velikostjo najmanj 1MB, ki ga\n" -"uporablja zagonski nalagalnik yaboot. Če ta razdelek nekoliko\n" -"povečate in mu namenite vsaj 50MB, boste nanj lahko shranjevali\n" -"potrebne datoteke za zasilni zagon sistema." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sq.po b/perl-install/install/help/po/sq.po index c2e891283..73ae613db 100644 --- a/perl-install/install/help/po/sq.po +++ b/perl-install/install/help/po/sq.po @@ -1112,12 +1112,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Në këtë etapë ju duhet të zgjedhni se cila(t) ndarje(t) do të përdoret(n)\n" "për sistemin tuaj Mageia. Nëse ndarja e diskut është bërë më heret,\n" @@ -1186,13 +1180,6 @@ msgstr "" "\n" "Për të përfituar më shumë informacione mbi sistemet e skedareve, lexoni mbi\n" "sistemin e skedareve ext2FS në ``Doracakun referues''.\n" -"\n" -"Nëse ju jeni duke instaluar një stacion PPC, ju duhet të krijoni një ndarje\n" -"të vogël HFS ``bootstrap'' më së paku 1MB, e cila do të përdoret nga " -"bootloader\n" -"yaboot. Nëse dëshironi të bëni një ndarje më të madhe, p.sh 50MB, ju duhet\n" -"të gjeni një vegël për të vendosur bërthamat dhe imazhet ramdisk hyrëse në\n" -"rastë të ndonji problemi." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sr.po b/perl-install/install/help/po/sr.po index 72917b3d8..26602b778 100644 --- a/perl-install/install/help/po/sr.po +++ b/perl-install/install/help/po/sr.po @@ -1151,12 +1151,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "На овој тачки, морате избрати коју партицију(e) желите да користите за\n" "инсталацију новог Mageia система. Уколико су партиције\n" @@ -1223,13 +1217,6 @@ msgstr "" "Да би добили информације о различитим доступним типовима система, " "прочитајте\n" "ext2FS поглавље из ``Упуства''.\n" -"\n" -"Уколико радите инсталацију на PPC Машину, можда ћете желети да креирате " -"малу\n" -"HFS 'bootstrap' партицију од најмање 1MB за употребу\n" -"yaboot стартера. Уколико се двоумите да ову партицију направите мало већом,\n" -"на пример 50MB, можете искористити тај простор за смештање\n" -"резервног кернела и ramdisk image за стартање у хитним ситуацијама." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sr@Latn.po b/perl-install/install/help/po/sr@Latn.po index 2128132ce..e48ce9baa 100644 --- a/perl-install/install/help/po/sr@Latn.po +++ b/perl-install/install/help/po/sr@Latn.po @@ -1154,12 +1154,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Na ovoj tački, morate izbrati koju particiju(e) želite da koristite za\n" "instalaciju novog Mageia sistema. Ukoliko su particije\n" @@ -1228,13 +1222,6 @@ msgstr "" "Da bi dobili informacije o različitim dostupnim tipovima sistema, " "pročitajte\n" "ext2FS poglavlje iz ``Upustva''.\n" -"\n" -"Ukoliko radite instalaciju na PPC Mašinu, možda ćete želeti da kreirate " -"malu\n" -"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n" -"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo većom,\n" -"na primer 50MB, možete iskoristiti taj prostor za smeštanje\n" -"rezervnog kernela i ramdisk image za startanje u hitnim situacijama." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/sv.po b/perl-install/install/help/po/sv.po index e65cf18a5..d1b321d2d 100644 --- a/perl-install/install/help/po/sv.po +++ b/perl-install/install/help/po/sv.po @@ -1107,12 +1107,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Nu måste du välja vilka partitioner som ska användas för installationen av\n" "Mageia-systemet. Om partitioner redan har definierats, antingen\n" @@ -1181,11 +1175,6 @@ msgstr "" "\n" "För att få information om de olika typerna av filsystem, läs kapitlet\n" "ext2FS i \"Reference Manual\".\n" -"\n" -"Om du installerar på en PPC-dator bör du skapa en en liten HFS-\n" -"partition (\"bootstrap\") på åtminstone 1 MB. Den kommer att användas av\n" -"starthanteraren Yaboot. Om du gör partitionen lite större, t ex 50 MB,\n" -"har du ett bra ställe att lagra en reservkärna och ramdiskar för nödlägen." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/ta.po b/perl-install/install/help/po/ta.po index eb82cb8ff..023c0740a 100644 --- a/perl-install/install/help/po/ta.po +++ b/perl-install/install/help/po/ta.po @@ -941,12 +941,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, you need to choose which " "partition(s) will be used for the\n" @@ -1012,12 +1006,6 @@ msgstr "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/tg.po b/perl-install/install/help/po/tg.po index 7c908f32e..e463bef2b 100644 --- a/perl-install/install/help/po/tg.po +++ b/perl-install/install/help/po/tg.po @@ -1160,12 +1160,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Дар ин пункт шумо бояд интихоб намоед, ки кадом бахш(ҳо) барои\n" "коргузории системавӣ Mageia-и шумо истифода бурда мешаванд.\n" @@ -1238,14 +1232,6 @@ msgstr "" "\n" "Барои гирифтани маълумот оиди намудҳои системаи файлии дастрас\n" "марҳамат карда боби ext2FS-ро аз ``Раҳнамои Муроҷиат'' хонед.\n" -"\n" -"Агар шумо дар мошинаи PPC коргузориро иҷро карда бошед, ба шумо\n" -"лозим меояд, ки бахши хурди HFS ``bootstrap''-ро офаред, ки ақалан 1Мб\n" -"бошад ва он аз тарафи боркунандаи yaboot истифода бурда мешавад.\n" -"Агар шумо хоҳед, ки бахшро каме калонтар кунед, масалан 50Мб шумо\n" -"онро ҷои хеле қуллай барои захиракунии ҳастаи эҳтиётӣ ва симоҳои ramdisk " -"ҳангоми ҳодисаи боркунии ғайричашмдошт,\n" -"пайдо хоҳед кард." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/th.po b/perl-install/install/help/po/th.po index b0ea997f4..f75089b4f 100644 --- a/perl-install/install/help/po/th.po +++ b/perl-install/install/help/po/th.po @@ -673,12 +673,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/tl.po b/perl-install/install/help/po/tl.po index bc8db25e4..ec30db6ab 100644 --- a/perl-install/install/help/po/tl.po +++ b/perl-install/install/help/po/tl.po @@ -1173,12 +1173,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Sa puntong ito, kailangan ninyong piliin kung aling mga partisyon ang\n" "gagamitin para sa pag-i-install ng sistema na Mageia. Kung ang\n" @@ -1256,14 +1250,6 @@ msgstr "" "Para makakuha ng inpormasyon tungkol sa mga iba't-ibang uri ng \"filesystem" "\",\n" "pakibasa ang kabanata ng ext2FS mula sa ``Reference Manual''.\n" -"\n" -"Kung kayo ay nag-i-install sa makina ng PPC, gugustuhin ninyong lumikha ng\n" -"maliit na partisyon na HFS ``bootstrap'' na may laking hindi liliit sa 1MB " -"na\n" -"gagamitin ng yaboot bootloader. Kung pipiliin ninyong mas malaki ang\n" -"partisyon, mga 50MB, makikita ninyong ito ay kapakipakinabang na lugar\n" -"sa pag-iimbak ng mga reserbang kernel at mga \"ramdisk image\" para sa\n" -"panahon ng mahigpit na pangangailangan." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/tr.po b/perl-install/install/help/po/tr.po index e7b24faea..c8aa56632 100644 --- a/perl-install/install/help/po/tr.po +++ b/perl-install/install/help/po/tr.po @@ -1062,12 +1062,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Bu noktada, Mageia işletim sisteminizi sabit diskinizde nereye\n" "kuracağınızı seçmeniz gerekiyor. Bölümler önceki bir kurulumda ya da bir\n" @@ -1140,14 +1134,6 @@ msgstr "" "Başka dosya sistemleri hakkında bilgi edinmek için \"Başvuru Kılavuzu" "\"ndaki\n" "ext2fs bölümünü okuyunuz.\n" -"\n" -"Bir PPC makina üzerine kurulum yapıyorsanız, yaboot önyükleyicisi " -"tarafından\n" -"kullanılmak üzere en az 1MB lık küçük bir HFS \"önyükleme\" bölümü " -"oluşturmak\n" -"isteyeceksiniz. Bu disk bölümünü biraz daha büyük, örneğin 50MB yaparsanız\n" -"bir yedek çekirdeğin ve kurtarma açılışı gereksinimleri için ramdisk\n" -"görüntüsünün saklanacağı kullanışlı bir alan elde edebilirsiniz." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/uk.po b/perl-install/install/help/po/uk.po index 262564433..0c30d69be 100644 --- a/perl-install/install/help/po/uk.po +++ b/perl-install/install/help/po/uk.po @@ -1120,12 +1120,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Зараз вам потрібно вибрати, які розділи використовувати для встановлення\n" "Вашої нової системи Mageia. Якщо ці розділи вже були створені\n" @@ -1194,13 +1188,6 @@ msgstr "" "\n" "Щоб отримати інформацію про різні типи файлових систем, які ви можете\n" "створити, прочитайте розділ ext2FS з \"Reference Manual\".\n" -"\n" -"Якщо ви встановлюєте систему на комп'ютер з процесором PPC, можете\n" -"створити маленький розділ типу HFS для завантаження 'bootstrap'\n" -"(розміром не менше 1 МБ) для завантажувача yaboot. Якщо ви вирішите\n" -"створити розділ трохи більшого розміру, скажімо 50 МБ, ви зможете\n" -"також зберігати на ньому резервне ядро системи та віртуальний диск для\n" -"аварійних завантажень системи. " #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/uz.po b/perl-install/install/help/po/uz.po index 8e13a4222..01b37b8ac 100644 --- a/perl-install/install/help/po/uz.po +++ b/perl-install/install/help/po/uz.po @@ -693,12 +693,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/uz@cyrillic.po b/perl-install/install/help/po/uz@cyrillic.po index 09fc9402b..6936189c9 100644 --- a/perl-install/install/help/po/uz@cyrillic.po +++ b/perl-install/install/help/po/uz@cyrillic.po @@ -692,12 +692,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" #: ../help.pm:526 diff --git a/perl-install/install/help/po/vi.po b/perl-install/install/help/po/vi.po index 6a934e236..e65d0b48d 100644 --- a/perl-install/install/help/po/vi.po +++ b/perl-install/install/help/po/vi.po @@ -1070,12 +1070,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Vào lúc này, bạn cần chọn những phân vùng nào sẽ được dùng để cài đặt\n" "hệ thống Mageia. Nếu các phân vùng đã được xác lập từ lần cài\n" @@ -1140,13 +1134,6 @@ msgstr "" "\n" "Để có thêm thông tin về các loại hệ thống tập tin hiện có, hãy đọc chương\n" "ext2FS ở trong ``Tài liệu Tham khảo''.\n" -"\n" -"Nếu đang thực hiện cài đặt trên máy PPC, có thể bạn muốn tạo một phân vùng\n" -"``bootstrap'' HFS có kích thước ít nhất 1MB để cho trình nạp khởi động\n" -"yaboot. Nếu lập kích thước phân vùng này lớn hơn một chút (50MB), bạn sẽ " -"thấy\n" -"đó là nơi hữu ích để lưu trữ kernel dự phòng và các ảnh ramdisk cho các\n" -"trường hợp khởi động khẩn cấp." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/wa.po b/perl-install/install/help/po/wa.po index 383ee138b..ccf42d645 100644 --- a/perl-install/install/help/po/wa.po +++ b/perl-install/install/help/po/wa.po @@ -1132,12 +1132,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "Chal, vos dvoz tchoezi so kéne/kénès pårticion(s) ki vos voloz astaler\n" "vosse sistinme Mageia. Si vos pårticions ont ddja stî fwaites\n" @@ -1212,12 +1206,6 @@ msgstr "" "\n" "Po-z aveur des informåcions so les diferins sistinmes di fitchîs k' i gn a,\n" "lijhoz li tchaptrê so «ext2FS» do «Manuel di Referince».\n" -"\n" -"Si vos alez astaler sor ene éndjole PPC, motoit ki vos vôroz fé ene pitite " -"pårticion HFS «d' enondaedje» di 1 Mo å moens po l' eployî avou l' enondrece " -"«yaboot». Si vos decidez del fé on pô pus grande, par egzimpe 50 Mo, çoula " -"pôreut fé ene clapante plaece po-z î mete on nawea et ene imådje ramdisk po " -"des cas d' urdjince k' i gn åreut." #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/zh_CN.po b/perl-install/install/help/po/zh_CN.po index 558ca9533..add346e46 100644 --- a/perl-install/install/help/po/zh_CN.po +++ b/perl-install/install/help/po/zh_CN.po @@ -1022,12 +1022,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "在这一步中, 您需要选择要使用哪个或哪些分区来安装您的 Mageia 系统。如" "果已经定义了分区, 不管是先前安装的 GNU/Linux\n" @@ -1082,11 +1076,6 @@ msgstr "" " * Ctrl+M 设定挂载点\n" "\n" "要的关于不同的文件系统类型的更多信息, 请查看“参考手册”中 ext2FS 一章。\n" -"\n" -"如果您在 PPC 计算机上安装, 您可能需要创建至少 1MB 大小的 HFS“bootstrap”分区, " -"该分区将用于 yaboot\n" -"引导程序。如果您创建的分区再稍微大点, 比如说 50MB, 您可能会发现这个分区可用来" -"存储内核或紧急引导时的虚拟磁盘映像。" #: ../help.pm:526 #, c-format diff --git a/perl-install/install/help/po/zh_TW.po b/perl-install/install/help/po/zh_TW.po index c32dfa74d..43fa463bf 100644 --- a/perl-install/install/help/po/zh_TW.po +++ b/perl-install/install/help/po/zh_TW.po @@ -930,12 +930,6 @@ msgid "" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." msgstr "" "在這個階段, 您需要選擇要用來安裝 Mageia 系統的分割區.\n" "如果分割區已經被定義了, 不管是從舊有的 GNU/Linux 安裝或是\n" @@ -990,12 +984,6 @@ msgstr "" "\n" "要得到關於不同可用的檔案系統的資訊, 請從 ``Reference Manual (參考手冊)''\n" "閱讀 ext2FS 章節.\n" -"\n" -"如果您正在安裝於一個 PPC 機器, 您將想要建立一個小的 HFS\n" -"``bootstrap'' 分割至少 1MB 以用於 yaboot 開機載入器. 如果您選擇使分割大一" -"些,\n" -"像 50MB, 您或許發現它是一個好用的貯存一個備用核心與 ramdisk\n" -"影像給緊急使用開機的好地方." #: ../help.pm:526 #, c-format |