diff options
-rw-r--r-- | Makefile | 11 | ||||
-rw-r--r-- | perl-install/ChangeLog | 11 | ||||
-rw-r--r-- | perl-install/Makefile | 2 | ||||
-rw-r--r-- | perl-install/Makefile.config | 2 | ||||
-rw-r--r-- | perl-install/Xconfigurator.pm | 4 | ||||
-rw-r--r-- | perl-install/c/Makefile.PL | 2 | ||||
-rw-r--r-- | perl-install/c/sbus.c | 123 | ||||
-rw-r--r-- | perl-install/c/stuff.xs.pm | 45 | ||||
-rw-r--r-- | perl-install/commands.pm | 6 | ||||
-rw-r--r-- | perl-install/detect_devices.pm | 2 | ||||
-rw-r--r-- | perl-install/install_steps_interactive.pm | 5 | ||||
-rw-r--r-- | perl-install/modules.pm | 22 | ||||
-rw-r--r-- | perl-install/my_gtk.pm | 3 | ||||
-rw-r--r-- | perl-install/sbus_probing/main.pm | 156 |
14 files changed, 375 insertions, 19 deletions
@@ -23,6 +23,7 @@ ROOTDEST = /export UPLOAD_DEST_ = ~/cooker UPLOAD_DEST = $(UPLOAD_DEST_)/cooker UPLOAD_DEST_CONTRIB = $(UPLOAD_DEST_)/contrib +UPLOAD_SPARC_DEST = /mnt/BIG/distrib/sparc AUTOBOOT = $(ROOTDEST)/dosutils/autoboot/mdkinst @@ -107,6 +108,16 @@ upload: tar install rm -f $(ROOTDEST)/Mandrake/mdkinst.tgz rm -f /tmp/mdkinst_done +upload_sparc: + touch /tmp/mdkinst_done + cp -a $(ROOTDEST)/images/* $(UPLOAD_SPARC_DEST)/images ; true + cp -a $(ROOTDEST)/boot/* $(UPLOAD_SPARC_DEST)/boot; true + cp -a $(ROOTDEST)/misc/* $(UPLOAD_SPARC_DEST)/misc; true + rm -rf $(UPLOAD_SPARC_DEST)/Mandrake/mdkinst + cp -a $(ROOTDEST)/Mandrake/mdkinst $(UPLOAD_SPARC_DEST)/Mandrake/mdkinst; true + ( cd $(ROOTDEST)/Mandrake/base; cp mdkinst_stage2.gz rescue_stage2.gz compss compssList compssUsers $(UPLOAD_SPARC_DEST)/Mandrake/base ); true + rm -f /tmp/mdkinst_done + # mkisofs -r -J -b images/cdrom.img -c images/boot.cat /tmp/r /mnt/disk/ | cdrecord -v -eject speed=6 dev=1,0 - # as distrib: mv ~/oxygen/oxygen/images ~/tmp/r # as mandrake: ~distrib/bin/mkisofs -r -b images/cdrom.img -c images/boot.cat -o /home/ftp/linux-mandrake/pub/mirror/oxyiso/oxygen-3.iso ~distrib/tmp/r ~distrib/oxygen/oxygen diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog index 75efebfac..bcf47c556 100644 --- a/perl-install/ChangeLog +++ b/perl-install/ChangeLog @@ -1,4 +1,15 @@ +2000-05-29 Fran�ois Pons <fpons@mandrakesoft.com> + + * Xconfigurator.pm: added support for SBUS card autodetection. + * commands.pm: added lssbus to list SBUS devices detected. + * detect_devices.pm: removed alpha restriction on USB. + * install_steps_interactive.pm: added SBUS support. + * c/sbus.c: initial revision, core SBUS support (inspired from kudzu). + * c/stuff.xs.pm: added wrapper for sbus.c interface. + * sbus_probing/main.pm: initial revision (inspired from kudzu). + 2000-05-27 Adam Lebsack <adam@mandrakesoft.com> + * share/list.ppc: various PPC modifications, for HFS * partition_table_mac.pm: bug fixes * partition_table.pm: various HFS fixes, isHiddenMacPart() diff --git a/perl-install/Makefile b/perl-install/Makefile index 3265325ce..5584ee23f 100644 --- a/perl-install/Makefile +++ b/perl-install/Makefile @@ -16,7 +16,7 @@ tar-drakxtools: clean $(MAKE) -C ../tools clean cd .. ; rm -rf drakxtools ; cp -af perl-install drakxtools ; cp -af tools/ddcprobe tools/serial_probe drakxtools cd ../drakxtools ; rm -rf install* pkgs.pm ftp.pm t.pm */CVS ; mv Makefile.drakxtools Makefile ; mv -f standalone/* . - cd .. ; tar cfy drakxtools.tar.bz2 --exclude CVS $(patsubst %,drakxtools/%,Makefile Makefile.config share/MonitorsDB share/Cards+ share/CardsNames Newt c ddcprobe serial_probe share/po pci_probing resize_fat share/diskdrake.rc $(STANDALONEPMS) icons *.pm) + cd .. ; tar cfy drakxtools.tar.bz2 --exclude CVS $(patsubst %,drakxtools/%,Makefile Makefile.config share/MonitorsDB share/Cards+ share/CardsNames Newt c ddcprobe serial_probe share/po pci_probing sbus_probing resize_fat share/diskdrake.rc $(STANDALONEPMS) icons *.pm) cd .. ; rm -rf drakxtools $(DIRS): diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config index 14a71573a..5ebbadbbb 100644 --- a/perl-install/Makefile.config +++ b/perl-install/Makefile.config @@ -4,7 +4,7 @@ ARCH := $(patsubst sparc%,sparc,$(ARCH)) VERSION = 2.2.10-BOOT SUDO = sudo SO_FILES = c/blib/arch/auto/c/c.so -PMS = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm pci_probing/*.pm commands install2 g_auto_install +PMS = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm pci_probing/*.pm sbus_probing/*.pm commands install2 g_auto_install STANDALONEPMS= diskdrake XFdrake mousedrake lspcidrake printerdrake keyboarddrake netdrake drakxconf drakxservices draksec drakboot adduserdrake rpmdrake PMS += $(STANDALONEPMS:%=standalone/%) REP4PMS = /usr/bin/perl-install diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm index 19094c3b4..0a312f8eb 100644 --- a/perl-install/Xconfigurator.pm +++ b/perl-install/Xconfigurator.pm @@ -138,12 +138,11 @@ sub keepOnlyLegalModes { } @$res; delete $card->{depth}{$depth} if @$res == 0; } - } sub cardConfigurationAuto() { my $card; - if (my (@c) = pci_probing::main::probe("DISPLAY")) { + if (my (@c) = (pci_probing::main::probe("DISPLAY"), sbus_probing::main::probe("DISPLAY"))) { local $_; ($card->{identifier}, $_) = @{$c[-1]}; $card->{type} = $1 if /Card:(.*)/; @@ -153,6 +152,7 @@ sub cardConfigurationAuto() { } #- take a default on sparc if nothing has been found. if (arch() =~ /^sparc/ && !$card->{server} && !$card->{type}) { + log::l("Using probe with /proc/fb as nothing has been found!"); local $_ = cat_("/proc/fb"); if (/Mach64/) { $card->{server} = "Mach64" } elsif (/Permedia2/) { $card->{server} = "3DLabs" } diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL index 4e76dea67..e406f1fe4 100644 --- a/perl-install/c/Makefile.PL +++ b/perl-install/c/Makefile.PL @@ -10,7 +10,7 @@ WriteMakefile( 'NAME' => 'stuff', 'OPTIMIZE' => '-Os', 'MAKEFILE' => 'Makefile_c', - 'OBJECT' => 'stuff.o smp.o md5.o md5_crypt.o', + 'OBJECT' => 'stuff.o smp.o md5.o md5_crypt.o sbus.o', 'VERSION_FROM' => 'stuff.pm', # finds $VERSION 'LIBS' => [$libs], # e.g., '-lm' 'DEFINE' => '', # e.g., '-DHAVE_SOMETHING' diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c new file mode 100644 index 000000000..1fed1f886 --- /dev/null +++ b/perl-install/c/sbus.c @@ -0,0 +1,123 @@ +/* This file is inspired from source code of kudzu from Red Hat, Inc. + * It has been modified to keep only "what is needed" in C, the prom_walk + * has been rewritten in perl for convenience :-) + * + * Copyright notice from original version. + * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM, + * SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips. + * + * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz) + * (C) 1999 Red Hat, Inc. + * + * This software may be freely redistributed under the terms of the GNU + * public license. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + */ + +#ifdef __sparc__ + +#include <fcntl.h> +#include <unistd.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <asm/openpromio.h> + +static char *promdev = "/dev/openprom"; +static int promfd = -1; +static int prom_current_node; +#define MAX_PROP 128 +#define MAX_VAL (4096-128-4) +static char buf[4096]; +#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size) + +int prom_open() +{ + int prom_root_node; + + if (promfd == -1) { + promfd = open(promdev, O_RDONLY); + if (promfd == -1) + return 0; + } + prom_root_node = prom_getsibling(0); + if (!prom_root_node) { + close(promfd); + promfd = -1; + return 0; + } + return prom_root_node; +} + +void prom_close() +{ + if (promfd != -1) { + close(promfd); + promfd = -1; + } +} + +int prom_getsibling(int node) +{ + DECL_OP(sizeof(int)); + + if (node == -1) return 0; + *(int *)op->oprom_array = node; + if (ioctl (promfd, OPROMNEXT, op) < 0) + return 0; + prom_current_node = *(int *)op->oprom_array; + return *(int *)op->oprom_array; +} + +int prom_getchild(int node) +{ + DECL_OP(sizeof(int)); + + if (!node || node == -1) return 0; + *(int *)op->oprom_array = node; + if (ioctl (promfd, OPROMCHILD, op) < 0) + return 0; + prom_current_node = *(int *)op->oprom_array; + return *(int *)op->oprom_array; +} + +char *prom_getproperty(char *prop, int *lenp) +{ + DECL_OP(MAX_VAL); + + strcpy (op->oprom_array, prop); + if (ioctl (promfd, OPROMGETPROP, op) < 0) + return 0; + if (lenp) *lenp = op->oprom_size; + return op->oprom_array; +} + +int prom_getbool(char *prop) +{ + DECL_OP(0); + + *(int *)op->oprom_array = 0; + for (;;) { + op->oprom_size = MAX_PROP; + if (ioctl(promfd, OPROMNXTPROP, op) < 0) + return 0; + if (!op->oprom_size) + return 0; + if (!strcmp (op->oprom_array, prop)) + return 1; + } +} + +#else +int prom_open() { return 0; } +void prom_close() {} +int prom_getsibling(int node) { return 0; } +int prom_getchild(int node) { return 0; } +char *prom_getproperty(char *prop, int *lenp) { return NULL; } +int prom_getbool(char *prop) { return 0; } +#endif /* __sparc__ */ diff --git a/perl-install/c/stuff.xs.pm b/perl-install/c/stuff.xs.pm index 77c779c83..034996d21 100644 --- a/perl-install/c/stuff.xs.pm +++ b/perl-install/c/stuff.xs.pm @@ -311,6 +311,51 @@ del_loop(device) OUTPUT: RETVAL +int +prom_open() + +void +prom_close() + +int +prom_getsibling(node) + int node + +int +prom_getchild(node) + int node + +void +prom_getproperty(key) + char *key + PPCODE: + int lenp = 0; + char *value = NULL; + value = prom_getproperty(key, &lenp); + EXTEND(sp, 1); + if (value != NULL) { + PUSHs(sv_2mortal(newSVpv(value, 0))); + } else { + PUSHs(&PL_sv_undef); + } + +int +prom_getbool(key) + char *key + +void +prom_getint(key) + char *key + PPCODE: + int lenp = 0; + char *value = NULL; + value = prom_getproperty(key, &lenp); + EXTEND(sp, 1); + if (value != NULL && lenp == sizeof(int)) { + PUSHs(sv_2mortal(newSViv(*(int *)value))); + } else { + PUSHs(&PL_sv_undef); + } '; $ENV{C_RPM} and print ' diff --git a/perl-install/commands.pm b/perl-install/commands.pm index 1bc534897..c6a784c93 100644 --- a/perl-install/commands.pm +++ b/perl-install/commands.pm @@ -3,7 +3,7 @@ #- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr, #- mount, umount, mkdir, mknod, ln, rm, chmod, chown, mkswap, swapon, #- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod, -#- modprobe, route, df, kill, lspci, dmesg, sort, du, +#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du, #-######################################################################## package commands; @@ -517,6 +517,10 @@ sub lspci { require 'pci_probing/main.pm'; print join "\n", pci_probing::main::list (), ''; } +sub lssbus { + require 'sbus_probing/main.pm'; + print join "\n", sbus_probing::main::list (), ''; +} sub dmesg { print cat_("/tmp/syslog"); } sub sort { diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm index 561ba1fd2..98ebcd403 100644 --- a/perl-install/detect_devices.pm +++ b/perl-install/detect_devices.pm @@ -254,7 +254,7 @@ sub probeUSB { require pci_probing::main; require modules; defined($usb_interface) and return $usb_interface; - arch() =~ /sparc|alpha/ and return $usb_interface = ''; + arch() =~ /sparc/ and return $usb_interface = ''; if (($usb_interface) = grep { /usb-/ } map { $_->[1] } pci_probing::main::probe('')) { eval { modules::load($usb_interface, "SERIAL_USB") }; if ($@) { diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm index 3023d8cb1..006f54377 100644 --- a/perl-install/install_steps_interactive.pm +++ b/perl-install/install_steps_interactive.pm @@ -1168,7 +1168,7 @@ sub setup_thiskind { return if arch() eq "ppc"; my @l; - my $allow_probe = !$::expert || $o->ask_yesorno('', _("Try to find PCI devices?"), 1); + my $allow_probe = !$::expert || $o->ask_yesorno('', _("Try to find %s devices?", "PCI" . (arch() =~ /sparc/ && "/SBUS")), 1); if ($allow_probe) { eval { @l = grep { !/ide-/ } $o->load_thiskind($type) }; @@ -1191,7 +1191,8 @@ sub setup_thiskind { } else { #-eval { commands::modprobe("isapnp") }; require pci_probing::main; - $o->ask_warn('', [ pci_probing::main::list() ]); #-, scalar cat_("/proc/isapnp") ]); + require sbus_probing::main; + $o->ask_warn('', [ pci_probing::main::list(), sbus_probing::main::list() ]); #-, scalar cat_("/proc/isapnp") ]); } } } diff --git a/perl-install/modules.pm b/perl-install/modules.pm index 69b9a884e..a2cf61b2d 100644 --- a/perl-install/modules.pm +++ b/perl-install/modules.pm @@ -352,6 +352,7 @@ sub get_options { sub add_alias($$) { my ($alias, $name) = @_; + $name =~ /ignore/ and return; /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $name and return $_ foreach keys %conf; $alias .= $scsi++ || '' if $alias eq 'scsi_hostadapter'; log::l("adding alias $alias to $name"); @@ -380,8 +381,6 @@ sub load { } else { $conf{$name}{loaded} and return; -#- $type ||= ($drivers{$name} || { type => 'unknown'})->{type}; - eval { load($_, 'prereq') } foreach @{$deps{$name}}; load_raw([ $name, @options ]); } @@ -421,8 +420,7 @@ sub unload($;$) { } sub load_raw { - my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } @_; - + my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_; my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz"; -e $cz or $cz .= "2"; run_program::run("extract_archive", $cz, "/tmp", map { "$_->[0].o" } @l); my @failed = grep { @@ -528,17 +526,22 @@ sub read_stage1_conf { sub load_thiskind($;&$) { my ($type, $f, $pcic) = @_; + my %loaded_text; require pci_probing::main; my @pcidevs = pci_probing::main::probe($type); log::l("pci probe found " . scalar @pcidevs . " $type devices"); + require sbus_probing::main; + my @sbusdevs = sbus_probing::main::probe($type); + log::l("sbus probe found " . scalar @sbusdevs . " $type devices"); + my @pcmciadevs = get_pcmcia_devices($type, $pcic); log::l("pcmcia probe found " . scalar @pcmciadevs . " $type devices"); - my @devs = (@pcidevs, @pcmciadevs); + my @devs = (@pcidevs, @sbusdevs, @pcmciadevs); - load("sd_mod") if $type eq 'scsi' && @devs; + load("sd_mod") if arch() !~ /sparc/ && $type eq 'scsi' && @devs; my %devs; foreach (@devs) { my ($text, $mod) = @$_; @@ -547,6 +550,7 @@ sub load_thiskind($;&$) { log::l("found driver for $mod"); &$f($text, $mod) if $f; load($mod, $type); + $loaded_text{$mod} = $text; } if ($type eq 'scsi') { @@ -558,17 +562,17 @@ sub load_thiskind($;&$) { -d "/proc/scsi/usb" or unload("usb-storage"); } #- probe for parport SCSI. - if (arch() !~ /sparc|alpha/) { + if (arch() !~ /sparc/) { foreach ("imm", "ppa") { eval { load($_, $type) }; last if !$@; } } - if (my ($c) = pci_probing::main::probe('AUDIO')) { + if (my ($c) = (pci_probing::main::probe('AUDIO'), sbus_probing::main::probe('AUDIO'))) { add_alias("sound", $c->[1]) if pci_probing::main::check($c->[1]); } } - @{$loaded{$type} || []}; + map { $loaded_text{$_} || $_ } @{$loaded{$type} || []}; } sub pcmcia_need_config($) { diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm index 200ada856..533dccb67 100644 --- a/perl-install/my_gtk.pm +++ b/perl-install/my_gtk.pm @@ -503,7 +503,8 @@ sub _ask_from_list { my $c = chr($e->{keyval} & 0xff); Gtk->timeout_remove($timeout) if $timeout; $timeout = ''; - + + print ord($c), "<<<<<<<<<\n"; if ($e->{keyval} >= 0x100) { &$leave if $c eq "\r" || $c eq "\x8d"; $starting_word = '' if $e->{keyval} != 0xffe4; # control diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm new file mode 100644 index 000000000..fa40160ae --- /dev/null +++ b/perl-install/sbus_probing/main.pm @@ -0,0 +1,156 @@ +package sbus_probing::main; + +use c; +use log; + +my %sbus_table_network = ( + hme => [ "Sun Happy Meal Ethernet", "sunhme" ], + le => [ "Sun Lance Ethernet", "ignore:lance" ], + qe => [ "Sun Quad Ethernet", "sunqe" ], + mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ], + myri => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ], + ); +my %sbus_table_scsi = ( + soc => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ], + socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ], + esp => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ], + fas => [ "Sun Swift (ESP)", "ignore:esp" ], + ptisp => [ "Performance Technologies ISP", "qlogicpti" ], + isp => [ "QLogic ISP", "qlogicpti" ], + ); +my %sbus_table_audio = ( + audio => [ "AMD7930", "amd7930" ], + CS4231 => [ "CS4231 APC DMA (SBUS)", "cs4231" ], + CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ], + ); +my %sbus_table_video = ( + bwtwo => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ], + cgthree => [ "Sun|Color3 (cgthree)", "Server:Sun" ], + cgeight => [ "Sun|CG8/RasterOps", "Server:Sun" ], + cgtwelve => [ "Sun|GS (cgtwelve)", "Server:Sun24" ], + gt => [ "Sun|Graphics Tower", "Server:Sun24" ], + mgx => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ], + mgx_4M => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ], + cgsix => [ "Sun|Unknown GX", "Server:Sun" ], + cgsix_dbl => [ "Sun|Double Width GX", "Server:Sun" ], + cgsix_sgl => [ "Sun|Single Width GX", "Server:Sun" ], + cgsix_t1M => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ], + cgsix_tp => [ "Sun|Turbo GX Plus", "Server:Sun" ], + cgsix_t => [ "Sun|Turbo GX", "Server:Sun" ], + cgfourteen => [ "Sun|SX", "Server:Sun24" ], + cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ], + cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ], + leo => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ], + leo_t => [ "Sun|Turbo ZX", "Server:Sun24" ], + tcx => [ "Sun|TCX (S24)", "Server:Sun24" ], + tcx_8b => [ "Sun|TCX (8bit)", "Server:Sun" ], + afb => [ "Sun|Elite3D", "Server:Sun24" ], + afb_btx03 => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ], + ffb => [ "Sun|FFB", "Server:Sun24" ], + ffb_btx08 => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ], + ffb_btx0b => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ], + ffb_btx1b => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ], + ffb_btx20 => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ], + ffb_btx28 => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ], + ffb_btx23 => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ], + ffb_btx2b => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ], + ffb_btx30 => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ], + ffb_btx33 => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ], + ffb_btx40 => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ], + ffb_btx48 => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ], + ffb_btx43 => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ], + ffb_btx4b => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ], + ); + +1; + +#- update %sbus_probed according to SBUS detection. +sub prom_walk($$$$) { + my ($sbus_probed, $node, $sbus, $ebus) = @_; + my ($prob_name, $prob_type) = (c::prom_getproperty("name"), c::prom_getproperty("device_type")); + my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus); + + log::l("sbus probe at $node => $prob_name of type $prob_type on $sbus,$ebus"); + #- probe for network devices. + if ($sbus && $prob_type eq 'network') { + $prob_name =~ s/[A-Z,]*(.*)/$1/; + $sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ]; + #- TODO for Sun Quad Ethernet (qe) + } + + #- probe for scsi devices. + if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) { + $prob_name =~ s/[A-Z,]*(.*)/$1/; + $sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ]; + } + + #- probe for audio devices, there are no type to check here. + if ($sbus_table_audio{$prob_name}) { + $prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/; + my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI"; + $sbus_table_audio{$prob_name . $ext} ? + push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] : + push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ]; + } + + #- probe for video devices. + if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) { + $prob_name =~ s/[A-Z,]*(.*)/$1/; + my $ext = ($prob_name eq 'mgx' && c::prom_getint('fb_size') == 0x400000 && '_4M' || + $prob_name eq 'cgsix' && do { + my ($chiprev, $vmsize) = (c::prom_getint('chiprev'), c::prom_getint('vmsize')); + my $result = ''; + $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl'; + $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl'; + $chiprev == 11 && $vmsize == 2 and $result = '_t1M'; + $chiprev == 11 && $vmsize == 4 and $result = '_tp'; + $chiprev == 11 && !$result and $result = '_t'; + $result; + } || + $prob_name eq 'leo' && c::prom_getproperty('model') =~ /501-2503/ && '_t' || + $prob_name eq 'tcx' && c::prom_getboot('tcx-8-bit') && '_8b' || + $prob_name eq 'afb' && sprintf "_btx%x", c::prom_getint('board_type') || + $prob_name eq 'ffb' && sprintf "_btx%x", c::prom_getint('board_type')); + + $sbus_table_video{$prob_name . $ext} ? + push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] : + push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ]; + } + + #- parse prom tree. + $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1; + $prob_name eq 'ebus' and $nebus = 1; + $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus); + $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus); +} + +sub check { + my $ok = $_[0] !~ /unknown/; + $ok or log::l("skipping $text, no module available (if you know one, please mail bugs\@linux-mandrake.com)"); + $ok +} + +sub probe($) { + my ($type) = @_; + + my $root_node = c::prom_open(); + my @l; + + prom_walk(\@l, $root_node, 0, 0); + c::prom_close(); + + $type eq '.' ? @l : map { [ @$_[1..$#$_] ] } grep { !$type || $_->[0] =~ /$type/i } @l; +} + +sub matching_desc($;$) { + my ($regexp) = @_; + + my $root_node = c::prom_open(); + my @l; + + prom_walk(\@l, $root_node, 0, 0); + c::prom_close(); + grep { !$type || $_->[1] =~ /$regexp/ } @l; +} + +sub list { map { "$_->[1] ($_->[0] $_->[2])" } probe('.'); } |