diff options
| -rw-r--r-- | perl-install/ChangeLog | 389 |
1 files changed, 388 insertions, 1 deletions
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog index 9f500b9c4..852c7ba9a 100644 --- a/perl-install/ChangeLog +++ b/perl-install/ChangeLog @@ -1,3 +1,390 @@ +2004/07/26 Pablo Saratxaga <pablo at mandrakesoft.com> + + * share/po/be.po: small fix + +2004/07/26 Pixel <pixel at mandrakesoft.com> + + * tools/make_mdkinst_stage2, install_steps_gtk.pm, docs/README, + Makefile.config, mdk-stage1/disk.c, pkgs.pm, mdk-stage1/doc/TECH-INFOS, + share/po/Makefile, install_steps.pm, standalone/drakpxe, + Makefile.drakxtools, Makefile, mdk-stage1/config-stage1.h, lang.pm, + tools/Makefile, install2.pm, modules.pm, rescue/Makefile, + share/advertising/Makefile, mdk-stage1/network.c, + tools/i386/netboot/menu.lst.example, install_any.pm: adapt to new + directories layout: + - Mandrake/mdkinst -> install/stage2/live + - Mandrake/base/mdkinst_stage2.bz2 -> + install/stage2/mdkinst_stage2.bz2 + - Mandrake/base/rpmsrate -> media/media_info/rpmsrate + - Mandrake/RPMS -> media/main + - images -> install/images + - isolinux -> install/isolinux + - Mandrake/share/advertising -> install/extra/advertising + + * fs/format.pm: fix typo + +2004/07/23 fisher + + * share/po/uk.po: Ukrainian translation update. + +2004/07/23 Olivier Blin <oblin at mandrakesoft.com> + + * standalone/drakconnect: remove useless $lan_button and $host_button in + old drakconnect + cosmetics (remove useless blanks at end of line) + prepare for network::tools::reread_net_conf removal + + * network/network.pm: hey, I suck, that's DIAL_ON_IFUP, not DIAL_ON_BOOT + - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections + - write this settings with configureNetwork2, kill the old tweak in + isdn.pm + - use the isdn_dial_on_boot step instead of nework_on_boot in + netconnect.pm + + * network/adsl.pm: pptp connections are now handled by pppd (#6515) + + * network/isdn.pm: + - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections + - write this settings with configureNetwork2, kill the old tweak in + isdn.pm + - use the isdn_dial_on_boot step instead of nework_on_boot in + netconnect.pm + FIRMWARE isn't used by ifup-ippp + + * network/netconnect.pm: hey, I suck, that's DIAL_ON_IFUP, not + DIAL_ON_BOOT + perl_checker compliance + one more FIXME comment + - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections + - write this settings with configureNetwork2, kill the old tweak in + isdn.pm + - use the isdn_dial_on_boot step instead of nework_on_boot in + netconnect.pm + +2004/07/23 Pixel <pixel at mandrakesoft.com> + + * fs.pm, fs/format.pm: replace pt_type2name($part->{pt_type}) with + part2name($part) + (hoisting the dereferencing {pt_type}) + - move format related functions out of fs.pm to new module + fs/format.pm + - remove swap.pm, moving its few functions to fs/format.pm or fs.pm + + * diskdrake/hd_gtk.pm, install_any.pm: replace + pt_type2name($part->{pt_type}) with part2name($part) + (hoisting the dereferencing {pt_type}) + + * tools/mkhdlist: obsolete since 4 years + + * partition_table.pm: replace pt_type2name($part->{pt_type}) with + part2name($part) + (hoisting the dereferencing {pt_type}) + - simplify partition table entry names (based on fdisk's names) + - rename some internal variables + old dos is not useful anymore + simplify + + * tools/updatehdlist: remove fpons only tool + + * diskdrake/interactive.pm: replace pt_type2name($part->{pt_type}) with + part2name($part) + (hoisting the dereferencing {pt_type}) + - move format related functions out of fs.pm to new module + fs/format.pm + - remove swap.pm, moving its few functions to fs/format.pm or fs.pm + fix indentation + + * loopback.pm, raid.pm, commands.pm, swap.pm: + - move format related functions out of fs.pm to new module + fs/format.pm + - remove swap.pm, moving its few functions to fs/format.pm or fs.pm + +2004/07/23 Vincent Guardiola <vguardiola at mandrakesoft.com> + + * authentication.pm: remove print coin and pwet in find_srv_name function + clean function find_srv_name + Add "net time set -S $server" to AD et SMBKRB config, for clock sync + (kerberos require) + +2004/07/22 Olivier Blin <oblin at mandrakesoft.com> + + * network/network.pm: rewrite read_tmdns_conf to use cat_ + perl_checker/misc fixes + +2004/07/22 Pixel <pixel at mandrakesoft.com> + + * modules/any_conf.pm: perl_checker enhancement + add $Id + modules::modprobe_conf now works (at least a little :) + + * fsedit.pm: shorter and faster + set {is_removable} directly in fsedit::hds() + + * modules/modprobe_conf.pm, modules/modules_conf.pm: add $Id + modules::modprobe_conf now works (at least a little :) + + * drakxtools.spec: need latest MDK::Common + + * modules.pm: cleanup + modules::modprobe_conf now works (at least a little :) + + * fs.pm: set {is_removable} directly in fsedit::hds() + + * detect_devices.pm: + - isRemovableDrive() removed, partially replaced with may_be_a_hd() + - the main difference is that isRemovableDrive() checked + isRemovableUsb() whereas + may_be_a_hd() allows more usb removable drives + (esp. memory cards and some usb keys declared as memory cards (0x0c76 + 0x0005)) + simplify + - re-indent + - use begins_with() + more cleanup + cleanup + isRemovableDrive() doesn't check isRemovableUsb() anymore allowing more + usb + removable drives (esp. some usb keys declared as memory cards (0x0c76 + 0x0005)) + + * network/network.pm: perl_checker compliance + - don't use if_() when not needed and strange + - read_tmdns_conf() now knows which file it reads, don't give it as + argument + +2004/07/22 Thierry Vignaud <tvignaud at mandrakesoft.com> + + * standalone.pm (rename) only log succesfull renamings + + * network/network.pm (read_tmdns_conf) unbreak oblin code + (read_tmdns_conf) reinsert parameter naming for parameter checking + + * drakxtools.spec: bump drakconf conflict due to new drakconnect API + +2004/07/21 Pixel <pixel at mandrakesoft.com> + + * standalone/drakautoinst: perl_checker fixes + + * standalone/drakboot, standalone/drakfloppy: remove unused variable + + * standalone/draksec, standalone/drakpxe, network/smb.pm: perl_checker + compliance + + * harddrake/autoconf.pm, standalone/service_harddrake: use + do_pkgs_standalone->new instead of class_discard + - %modules::conf is no more a global, so many functions need passing + $modules_conf + - $modules_conf is a class choosing modules.conf or modprobe.conf + (esp. useful after install) (but not working yet!) + - modules::load() doesn't use $modules_conf, use + modules::load_and_configure() + - modules::load() doesn't allow options, use either + modules::load_raw() or modules::load_and_configure() + - some functions used to want an array ref for modules options and + some a string, now every functions use a string + - many functions (like modules::get_alias()) are now methods on + $modules_conf + - some functions in mouse.pm needed a $in where a $do_pkgs is enough + - some perl_checker compliance + - small fixes + + * do_pkgs.pm: + - do_pkgs_standalone->new doesn't *need* a $in anymore + - ->in replace ->{in} so that it can be created on demand (ugly, + but...) + ->{in}->do_pkgs gives the same kind of object, removing it + + * standalone/XFdrake: XFdrake doesn't modify modules_conf! (or does it?) + + * network/network.pm, install_steps.pm, network/isdn.pm, + install_steps_interactive.pm, network/netconnect.pm, mouse.pm, + install2.pm, modules/modprobe_conf.pm, harddrake/v4l.pm, + modules/interactive.pm, standalone/mousedrake, commands.pm, + printer/detect.pm, printer/main.pm, standalone/printerdrake, + harddrake/sound.pm, install_steps_auto_install.pm, network/ethernet.pm, + modules/any_conf.pm, standalone/drakconnect, modules/modules_conf.pm, + standalone/drakgw, harddrake/data.pm, network/adsl.pm, + detect_devices.pm, modules.pm, network/shorewall.pm, network/tools.pm, + Xconfig/default.pm, standalone/draksound, install_any.pm, + printer/printerdrake.pm, standalone/drakxtv: + - %modules::conf is no more a global, so many functions need passing + $modules_conf + - $modules_conf is a class choosing modules.conf or modprobe.conf + (esp. useful after install) (but not working yet!) + - modules::load() doesn't use $modules_conf, use + modules::load_and_configure() + - modules::load() doesn't allow options, use either + modules::load_raw() or modules::load_and_configure() + - some functions used to want an array ref for modules options and + some a string, now every functions use a string + - many functions (like modules::get_alias()) are now methods on + $modules_conf + - some functions in mouse.pm needed a $in where a $do_pkgs is enough + - some perl_checker compliance + - small fixes + +2004/07/21 Thierry Vignaud <tvignaud at mandrakesoft.com> + + * .perl_checker: blacklist URPM::Resolve + + * standalone/drakauth: perl_checker fix + + * lang.pm: fix xmodifiers setting which is broken since + perl-MDK-Common-1.1.13-1mdk + + * drakxtools.spec: 10-57mdk + bump requires on perl-MDK-Common b/c of localedrake vs CJK issue + +2004/07/21 Vincent Guardiola <vguardiola at mandrakesoft.com> + + * authentication.pm: Add service smb et winbind restart in smbkrb config + +2004/07/20 Olivier Blin <oblin at mandrakesoft.com> + + * network/tools.pm: merge netconnect::load_conf in netconnect::read_conf + (and replace all calls to lload_conf with read_conf, remove all previous + calls to read_conf) + don't probe again connection type here since now + network::netconnect::load_conf does it as intended initially + + * install_steps_interactive.pm: use correct method variable in chooseCD + (even if this code is used only in expert + mode which isn't anymore supported) + + * network/netconnect.pm: fix perl_checker combo (yeah) + oops, fix suckiness + use read_net_conf to avoid code duplication + merge netconnect::load_conf in netconnect::read_conf (and replace all + calls to lload_conf with read_conf, remove all previous calls to + read_conf) + unused variable + don't forget to send $netcnx to network::network::read_all_conf ... + (or else we won't get back the probed connection type) + + * standalone/draksound: do not probe devices twice (and avoid to grep on + detect_devices::probeall()), cosmetics + + * standalone/net_monitor: merge netconnect::load_conf in + netconnect::read_conf (and replace all calls to lload_conf with + read_conf, remove all previous calls to read_conf) + cosmetics + do not allocate new Gtk2::Gdk::GC at each redraw (last memory leak + fixed ?) + use the power of the Gtk2::Dialog widget, thus giving change_color() + more luck to succeed + translate connection type (Fabrice Facorat) + fix spacing (from Fabrice Facorat, #10300), remove blank line + + * standalone/drakconnect: maxi perl_checker compliance combo + do not read conf in add_intf, this is already done by the netconnect + wizard + merge netconnect::load_conf in netconnect::read_conf (and replace all + calls to lload_conf with read_conf, remove all previous calls to + read_conf) + +2004/07/20 Pablo Saratxaga <pablo at mandrakesoft.com> + + * share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po, + share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po, + share/po/hr.po, share/po/translation_size.pl, share/po/be.po, + share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, + share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/ca.po, + share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po, + share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, + share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, + share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po, + share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po, + share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po, + share/po/ga.po, share/po/uk.po, share/po/mn.po, share/po/am.po, lang.pm, + share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po, + share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po, + share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po, + share/po/vi.po, share/po/fr.po, share/po/ta.po, share/po/nl.po, + share/po/de.po, share/po/tl.po, share/po/validate.pl, share/po/eo.po, + share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: + changed MandrakeSoft -> Mandrakesoft + +2004/07/20 Pixel <pixel at mandrakesoft.com> + + * bootloader.pm: remove debugging code + + * authentication.pm, install_steps_gtk.pm: perl_checker compliance + + * mdk-stage1/dns.c, mdk-stage1/pcmcia_/cardmgr.c, standalone/drakfirewall, + share/advertising/pwp-02.pl, rescue/restore_ms_boot, + mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, tools/genmodparm, + tools/gencryptofiles, rescue/tree/sbin/fakeshutdown, standalone/drakpxe, + mdk-stage1/config-stage1.h, standalone/drakvpn, standalone/drakboot, + standalone.pm, mdk-stage1/init-libc-headers.h, standalone/drakTermServ, + mdk-stage1/mar/mar-frontend.c, mdk-stage1/probing.h, + standalone/drakbackup, mdk-stage1/pcmcia_/probe.c, + mdk-stage1/insmod-busybox/insmod-frontend.c, + tools/serial_probe/serial_probe.c, mdk-stage1/disk.h, + mdk-stage1/modules.c, mdk-stage1/mount.c, standalone/printerdrake, + standalone/fileshareset, standalone/drakedm, mdk-stage1/modules.h, + share/advertising/dwd-01.pl, mdk-stage1/mar/mar.h, + share/advertising/dis-01.pl, standalone/drakhelp, standalone/XFdrake, + mdk-stage1/insmod.h, mdk-stage1/rp-pppoe/src/Makefile, + mdk-stage1/pcmcia_/pcmcia.h, standalone/drakupdate_fstab, + mdk-stage1/bzlib/Makefile, scanner.pm, mdk-stage1/Makefile.common, + mdk-stage1/stdio-frontend.c, standalone/drakproxy, + tools/ppc/mkINSTALLCD, share/advertising/dwd-06.pl, + mdk-stage1/rescue-gui.c, mdk-stage1/nfsmount.c, mdk-stage1/network.h, + mdk-stage1/doc/README, mdk-stage1/log.h, standalone/drakfloppy, + mdk-stage1/newt/Makefile, standalone/drakfont, + mdk-stage1/newt-frontend.c, share/advertising/ppp-01.pl, + rescue/tree/etc/profile, share/advertising/dis-09.pl, + mdk-stage1/network.c, mdk-stage1/disk.c, rescue/guessmounts, + mdk-stage1/url.c, standalone/logdrake, mdk-stage1/automatic.h, + mdk-stage1/frontend.h, mdk-stage1/insmod-modutils/insmod-frontend.c, + rescue/lsparts, mdk-stage1/usb-resource/Makefile, mdk-stage1/url.h, + mdk-stage1/probing.c, mdk-stage1/mar/mar-extract-only.h, + mdk-stage1/cdrom.c, mouse.pm, mdk-stage1/lomount.h, mdk-stage1/dhcp.h, + standalone/net_monitor, mdk-stage1/stage1.c, diskdrake/diskdrake.html, + mdk-stage1/dhcp.c, mdk-stage1/init.c, mdk-stage1/pci-resource/Makefile, + mdk-stage1/mkinitrd_helper/Makefile, install2, mdk-stage1/Makefile, + rescue/install_bootloader, mdk-stage1/lomount.c, mdk-stage1/adsl.h, + share/advertising/ppp-09.pl, mdk-stage1/adsl.c, mdk-stage1/dns.h, + mdk-stage1/automatic.c, mdk-stage1/mar/mar-extract-only.c, + standalone/drakconnect, tools/shift_img.c, standalone/drakbug, + tools/make_lang_png_transparent.c, mdk-stage1/frontend-common.c, + standalone/draksound, standalone/drakxtv, mdk-stage1/tools.h, + share/compssUsers.server, mdk-stage1/slang/Makefile, + mdk-stage1/minilibc.h, standalone/drakautoinst, mdk-stage1/cdrom.h, + mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/stage1.h, + standalone/diskdrake, mdk-stage1/doc/documented..frontend.h, + mdk-stage1/mount.h, mdk-stage1/directory.c, rescue/drvinst, + mdk-stage1/mar/Makefile, mdk-stage1/directory.h, mdk-stage1/log.c, + install_messages.pm, mdk-stage1/modules_descr.h, standalone/drakgw, + mdk-stage1/pcmcia_/Makefile, mdk-stage1/tools.c, + share/advertising/pwp-01.pl, tools/syncrpms, + share/advertising/pwp-08.pl, mdk-stage1/ppp/pppd/Makefile, + standalone/scannerdrake, mdk-stage1/minilibc.c: MandrakeSoft -> + Mandrakesoft + + * share/list: adapt to file renaming + +2004/07/20 Thierry Vignaud <tvignaud at mandrakesoft.com> + + * authentication.pm: better looking wizard + + * lang.pm (write) better check parameter rather than EUID + (write) do not bother trying to write /etc/menu-methods/lang.h when + run as a user + + * standalone/drakauth: better looking wizard + put help out of the radiobutton + +2004/07/20 Vincent Guardiola <vguardiola at mandrakesoft.com> + + * authentication.pm: remove ask_warn winbind or SFU and add new entry in + kinds + Add desciption for authentification type + Add Entry for IDMAP + clean code + + * standalone/drakauth: Add type => 'list' in ask_from + 2004/07/20 Pixel <pixel at mandrakesoft.com> * share/list: adapt to file renaming @@ -32865,7 +33252,7 @@ * Makefile.config: remove dir security - * proxy.pm: add $Id: ChangeLog,v 1.932 2004/07/15 02:21:22 prigaux Exp $ + * proxy.pm: add $Id: ChangeLog,v 1.933 2004/07/20 02:11:20 prigaux Exp $ * interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are more accurate than |