summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorTill Kamppeter <tkamppeter@mandriva.com>2002-02-05 23:42:28 +0000
committerTill Kamppeter <tkamppeter@mandriva.com>2002-02-05 23:42:28 +0000
commitd91e657e98161963aee317bf02d64ad2b64f835c (patch)
treead10acf692d5bd2c1bd318caafbe985765b24947 /perl-install
parentc01a3f6418564b123763043bb8be29c4a326d426 (diff)
downloaddrakx-d91e657e98161963aee317bf02d64ad2b64f835c.tar
drakx-d91e657e98161963aee317bf02d64ad2b64f835c.tar.gz
drakx-d91e657e98161963aee317bf02d64ad2b64f835c.tar.bz2
drakx-d91e657e98161963aee317bf02d64ad2b64f835c.tar.xz
drakx-d91e657e98161963aee317bf02d64ad2b64f835c.zip
Added automatic configuration of HPOJ for HP's multi-function devices.
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/printer.pm106
-rw-r--r--perl-install/printerdrake.pm37
2 files changed, 137 insertions, 6 deletions
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index 98e7b4d85..d75e03e76 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -1413,11 +1413,113 @@ sub get_copiable_queues {
sub copy_foomatic_queue {
my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
run_program::rooted($prefix, "foomatic-configure", "-q",
- "-s", $printer->{SPOOLER},
- "-n", $newqueue,
+ "-s", $printer->{SPOOLER},
+ "-n", $newqueue,
"-C", $oldspooler, $oldqueue);
}
+sub configure_hpoj {
+ my ($device, @autodetected) = @_;
+ # Get the model ID as auto-detected
+ my $model;
+ foreach (@autodetected) {
+ $device eq $_->{port} or next;
+ $model = $_->{val}{MODEL};
+ last;
+ }
+ #$device = "/dev/usb/lp1"; $model = "DeskJet 990C";
+ # Read the HPOJ config file and check whether this device is already
+ # configured
+ my $deviceconfigured = 0;
+ my $ptaldevice;
+ my $hpoj_config = "/etc/ptal-start.conf";
+ local *HPOJCONFIG;
+ if (open HPOJCONFIG, ("< $prefix$hpoj_config")) {
+ while ($line = <HPOJCONFIG>) {
+ chomp $line;
+ # Comment or blank line
+ next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/));
+ # Only lines beginning with "ptal-mlcd" are interesting.
+ next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/);
+ $ptaldevice = "mlc:$1";
+ if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
+ # Parallel device
+ next if ($device =~ /usb/);
+ if ($line =~ m!-device\s+$device!) {
+ # Our new device is parallel and already configured
+ # by the current line
+ $deviceconfigured = 1;
+ last;
+ }
+ } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) {
+ # USB device
+ next if ($device !~ /usb/);
+ if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) {
+ $configuredmodel = $1;
+ $configuredmodel =~ s/\"//g;
+ $configuredmodel =~ s/^mdl://;
+ $configuredmodel =~ s/^model://;
+ $configuredmodel =~ s/;$//;
+ if ($configuredmodel eq $model) {
+ # Our new device is USB and already configured
+ # by the current line
+ $deviceconfigured = 1;
+ last;
+ }
+ } elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) {
+ if ($1 eq $device) {
+ # Our new device is USB and already configured
+ # by the current line
+ $deviceconfigured = 1;
+ last;
+ }
+ }
+ }
+ }
+ close HPOJCONFIG;
+ }
+
+ # It's all done for us, the device is already configured
+ return $ptaldevice if $deviceconfigured;
+
+ # Configure the device
+ my $entry;
+ if ($device =~ /usb/) {
+ # USB device
+ my $ptaldevicemodel = $model;
+ $ptaldevicemodel =~ s/\s+/_/g;
+ $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
+ $ptaldevice = "mlc:usb:$ptaldevicemodel";
+ } else {
+ # parallel device
+ # auto-detect the parallel port addresses
+ $device =~ m!^/dev/lp(\d+)$!;
+ my $portnumber = $1;
+ my $parport_addresses =
+ `cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
+ my $address_arg;
+ if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
+ $address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
+ } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
+ $address_arg = sprintf(" -base 0x%x", $1);
+ } else {
+ $address_arg = "";
+ }
+ $entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n";
+ $ptaldevice = "mlc:par:$portnumber";
+ }
+
+ # Add new entry to HPOJ's config file
+ open(HPOJCONFIG,">> $prefix$hpoj_config") ||
+ die "Could not open $hpoj_config for writing!\n";
+ print HPOJCONFIG $entry;
+ close HPOJCONFIG;
+ # Restart HPOJ
+ restart_service("hpoj");
+ # Return HPOJ device name to form the URI
+ return $ptaldevice;
+}
+
#-######################################################################################
#- Wonderful perl :(
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index 126ade703..d1aa9d851 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -448,16 +448,45 @@ _(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1
}
}
+ #- Check whether the printer is an HP multi-function device and
+ #- configure HPOJ if it is one
+
+ my $ptaldevice = "";
+ if (($menuchoice =~ /HP OfficeJet/i) ||
+ ($menuchoice =~ /HP PSC/i) ||
+ ($menuchoice =~ /HP PhotoSmart/i) ||
+ ($menuchoice =~ /HP LaserJet 1100/i) ||
+ ($menuchoice =~ /HP LaserJet 1200/i) ||
+ ($menuchoice =~ /HP LaserJet 1220/i) ||
+ ($menuchoice =~ /HP LaserJet 3200/i)) {
+ # Install HPOJ package
+ if ((!$::testing) &&
+ (!printer::files_exist((qw(/usr/sbin/ptal-mlcd
+ /etc/ptal-start.conf))))) {
+ my $w = $in->wait_message('', _("Installing HPOJ package..."));
+ $in->do_pkgs->install('hpoj');
+ }
+ # Configure and start HPOJ
+ $ptaldevice = printer::configure_hpoj($device, @parport);
+
+ # make the DeviceURI from $device.
+ $printer->{currentqueue}{'connect'} = "ptal:/" . $ptaldevice;
+ } else {
+ # make the DeviceURI from $device.
+ $printer->{currentqueue}{'connect'} = "file:" . $device;
+ }
+
#- if CUPS is the spooler, make sure that CUPS knows the device
if ($printer->{SPOOLER} eq "cups") {
my $w = $in->wait_message
('', _("Making printer port available for CUPS ..."));
- printer::assure_device_is_available_for_cups($device);
+ if ($ptaldevice eq "") {
+ printer::assure_device_is_available_for_cups($device);
+ } else {
+ printer::assure_device_is_available_for_cups($ptaldevice);
+ }
}
- #- make the DeviceURI from $device.
- $printer->{currentqueue}{'connect'} = "file:" . $device;
-
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
my $w = $in->wait_message('', _("Reading printer database ..."));