summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorPascal Rigaux <pixel@mandriva.com>2002-08-01 11:31:45 +0000
committerPascal Rigaux <pixel@mandriva.com>2002-08-01 11:31:45 +0000
commit5741eec64d02381676f5aab89ad23e2413eabbd0 (patch)
treec4302bbd1e654ff49195d0d05be5c12a8d55d4ba /perl-install
parent11647c80f3898d05df4e3deedc2f415c02632bbf (diff)
downloaddrakx-5741eec64d02381676f5aab89ad23e2413eabbd0.tar
drakx-5741eec64d02381676f5aab89ad23e2413eabbd0.tar.gz
drakx-5741eec64d02381676f5aab89ad23e2413eabbd0.tar.bz2
drakx-5741eec64d02381676f5aab89ad23e2413eabbd0.tar.xz
drakx-5741eec64d02381676f5aab89ad23e2413eabbd0.zip
get rid of some $prefix parameter passing (using $::prefix where needed instead)
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/any.pm6
-rw-r--r--perl-install/bootloader.pm202
-rw-r--r--perl-install/fsedit.pm6
-rw-r--r--perl-install/install_steps.pm4
-rw-r--r--perl-install/pkgs.pm2
5 files changed, 108 insertions, 112 deletions
diff --git a/perl-install/any.pm b/perl-install/any.pm
index fbafd4da0..4085add9c 100644
--- a/perl-install/any.pm
+++ b/perl-install/any.pm
@@ -343,7 +343,7 @@ if (arch() !~ /ppc/) {
} } }, \@l)) {
$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
require bootloader;
- bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
+ bootloader::configure_entry($e); #- hack to make sure initrd file are built.
push @{$b->{entries}}, $e if $c eq "Add";
} else {
@@ -884,10 +884,10 @@ sub write_passwd_user {
}
sub set_login_serial_console {
- my ($prefix, $port, $speed) = @_;
+ my ($port, $speed) = @_;
my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
- substInFile { s/^s$port:.*//; $_ = $line if eof } "$prefix/etc/inittab";
+ substInFile { s/^s$port:.*//; $_ = $line if eof } "$::prefix/etc/inittab";
}
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
index 8eb91aed3..76ec21ae4 100644
--- a/perl-install/bootloader.pm
+++ b/perl-install/bootloader.pm
@@ -51,39 +51,37 @@ sub get_label {
undef;
}
-sub mkinitrd($$$) {
- my ($prefix, $kernelVersion, $initrdImage) = @_;
+sub mkinitrd {
+ my ($kernelVersion, $initrdImage) = @_;
- $::oem or $::testing || -e "$prefix/$initrdImage" and return;
+ $::oem or $::testing || -e "$::prefix/$initrdImage" and return;
- my $loop_boot = loopback::prepare_boot($prefix);
+ my $loop_boot = loopback::prepare_boot();
modules::load('loop');
- if (!run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion)) {
- unlink("$prefix/$initrdImage");
+ if (!run_program::rooted($::prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion)) {
+ unlink("$::prefix/$initrdImage");
die "mkinitrd failed";
}
loopback::save_boot($loop_boot);
- -e "$prefix/$initrdImage";
+ -e "$::prefix/$initrdImage";
}
-sub mkbootdisk($$$;$) {
- my ($prefix, $kernelVersion, $dev, $append) = @_;
+sub mkbootdisk {
+ my ($kernelVersion, $dev, $append) = @_;
- modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop');
- my @l = qw(mkbootdisk --noprompt);
- push @l, "--appendargs", $append if $append;
- eval { modules::load('vfat') };
- run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
+ modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop', 'vfat');
+ my @l = if_($append, '--appendargs', $append);
+ run_program::rooted_or_die($::prefix, 'mkbootdisk', '--noprompt', @l, '--device', "/dev/$dev", $kernelVersion);
}
-sub read($$) {
- my ($prefix, $file) = @_;
+sub read() {
+ my $file = sprintf("/etc/%s.conf", arch() =~ /sparc/ ? 'silo' : arch() =~ /ppc/ ? 'yaboot' : 'lilo');
my $global = 1;
my ($e, $v, $f);
my %b;
- foreach (cat_("$prefix$file")) {
+ foreach (cat_("$::prefix$file")) {
($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
if (/^(image|other)$/) {
@@ -120,7 +118,7 @@ sub read($$) {
delete $b{timeout} unless $b{prompt};
$_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
$b{timeout} = $b{timeout} / 10 if $b{timeout};
- $b{message} = cat_("$prefix$b{message}") if $b{message};
+ $b{message} = cat_("$::prefix$b{message}") if $b{message};
}
\%b;
}
@@ -158,7 +156,7 @@ sub add_entry($$) {
}
sub add_kernel {
- my ($prefix, $lilo, $version, $ext, $root, $v) = @_;
+ my ($lilo, $version, $ext, $root, $v) = @_;
#- new versions of yaboot don't handle symlinks
my $ppcext = $ext;
@@ -167,15 +165,15 @@ sub add_kernel {
}
log::l("adding vmlinuz$ext as vmlinuz-$version");
- -e "$prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $prefix/boot/vmlinuz-$version"), return;
+ -e "$::prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $::prefix/boot/vmlinuz-$version"), return;
my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
- symlinkf("vmlinuz-$version", "$prefix/boot/vmlinuz$ext") ? $ext : "-$version");
+ symlinkf("vmlinuz-$version", "$::prefix/boot/vmlinuz$ext") ? $ext : "-$version");
my $initrd = "/boot/initrd-$version.img";
- mkinitrd($prefix, $version, $initrd) or undef $initrd;
+ mkinitrd($version, $initrd) or undef $initrd;
if ($initrd && $ext ne "-$version") {
$initrd = "/boot/initrd$ext.img";
- symlinkf("initrd-$version.img", "$prefix$initrd") or cp_af("$prefix/boot/initrd-$version.img", "$prefix$initrd");
+ symlinkf("initrd-$version.img", "$::prefix$initrd") or cp_af("$::prefix/boot/initrd-$version.img", "$::prefix$initrd");
}
my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
@@ -237,16 +235,16 @@ sub may_append {
add_append($b, $key, $val) if !get_append($b, $key);
}
-sub configure_entry($$) {
- my ($prefix, $entry) = @_;
+sub configure_entry {
+ my ($entry) = @_;
if ($entry->{type} eq 'image') {
my $specific_version;
$entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
- readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
+ readlink("$::prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
if ($specific_version) {
$entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
- mkinitrd($prefix, $specific_version, $entry->{initrd}) or undef $entry->{initrd};
+ mkinitrd($specific_version, $entry->{initrd}) or undef $entry->{initrd};
}
}
$entry;
@@ -260,9 +258,8 @@ sub dev2prompath { #- SPARC only
$dev;
}
-sub get_kernels_and_labels {
- my ($prefix) = @_;
- my $dir = "$prefix/boot";
+sub get_kernels_and_labels() {
+ my $dir = "$::prefix/boot";
my @l = grep { /^vmlinuz-/ } all($dir);
my @kernels = grep { ! -l "$dir/$_" } @l;
@@ -305,7 +302,7 @@ sub get_kernels_and_labels {
}
sub suggest {
- my ($prefix, $lilo, $hds, $fstab, %options) = @_;
+ my ($lilo, $hds, $fstab, %options) = @_;
my $root_part = fsedit::get_root($fstab);
my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
my $boot = fsedit::get_root($fstab, 'boot')->{device};
@@ -349,7 +346,7 @@ sub suggest {
});
if (!$lilo->{message} || $lilo->{message} eq "1") {
- $lilo->{message} = join('', cat_("$prefix/boot/message"));
+ $lilo->{message} = join('', cat_("$::prefix/boot/message"));
if (!$lilo->{message}) {
my $msg_en =
#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
@@ -370,24 +367,24 @@ wait %d seconds for default boot.
if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
log::l("serial console $s $port $speed");
add_append($lilo, 'console' => $s);
- any::set_login_serial_console($prefix, $port, $speed);
+ any::set_login_serial_console($port, $speed);
}
- my %labels = get_kernels_and_labels($prefix);
+ my %labels = get_kernels_and_labels();
$labels{''} or die "no kernel installed";
while (my ($ext, $version) = each %labels) {
- my $entry = add_kernel($prefix, $lilo, $version, $ext, $root,
+ my $entry = add_kernel($lilo, $version, $ext, $root,
{
if_($options{vga_fb} && $ext eq '', vga => $options{vga_fb}), #- using framebuffer
});
$entry->{append} .= " quiet" if $options{vga_fb} && $version !~ /smp|enterprise/ && $options{quiet};
if ($options{vga_fb} && $ext eq '') {
- add_kernel($prefix, $lilo, $version, $ext, $root, { label => 'linux-nonfb' });
+ add_kernel($lilo, $version, $ext, $root, { label => 'linux-nonfb' });
}
}
- my $failsafe = add_kernel($prefix, $lilo, $labels{''}, '', $root, { label => 'failsafe' });
+ my $failsafe = add_kernel($lilo, $labels{''}, '', $root, { label => 'failsafe' });
$failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
$failsafe->{append} .= " failsafe";
@@ -451,7 +448,7 @@ wait %d seconds for default boot.
);
unless ($lilo->{methods}) {
$lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
- if ($lilo->{methods}{lilo} && -e "$prefix/boot/message-graphic") {
+ if ($lilo->{methods}{lilo} && -e "$::prefix/boot/message-graphic") {
$lilo->{methods}{lilo} = "lilo-graphic";
exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
}
@@ -473,14 +470,16 @@ sub suggest_floppy {
});
}
-sub keytable($$) {
- my ($prefix, $f) = @_;
- local $_ = $f;
- if ($_ && !/\.klt$/) {
- $f = "/boot/$_.klt";
- run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
+sub keytable {
+ my ($f) = @_;
+ $f or return;
+
+ if ($f !~ /\.klt$/) {
+ my $file = "/boot/$f.klt";
+ run_program::rooted($::prefix, "keytab-lilo.pl", ">", $file, $f) or return;
+ $f = $file;
}
- $f && -r "$prefix/$f" && $f;
+ -r "$::prefix/$f" && $f;
}
sub has_profiles { to_bool(get_label("office", $b)) }
@@ -502,39 +501,36 @@ sub set_profiles {
}
-sub get_of_dev($$) {
- my ($prefix, $unix_dev) = @_;
+sub get_of_dev {
+ my ($unix_dev) = @_;
#- don't care much for this - need to run ofpath rooted, and I need the result
#- In test mode, just run on "/", otherwise you can't get to the /proc files
- if ($::testing) {
- $prefix = "";
- }
- run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
- open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
+ run_program::rooted_or_die($::prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
+ open(FILE, "$::prefix/tmp/ofpath") || die "Can't open $::prefix/tmp/ofpath";
my $of_dev = "";
local $_ = "";
while (<FILE>){
$of_dev = $_;
}
chop($of_dev);
- my @del_file = ($prefix . "/tmp/ofpath");
+ my @del_file = ($::prefix . "/tmp/ofpath");
unlink (@del_file);
log::l("OF Device: $of_dev");
$of_dev;
}
-sub install_yaboot($$$) {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+sub install_yaboot {
+ my ($lilo, $fstab, $hds) = @_;
$lilo->{prompt} = $lilo->{timeout};
if ($lilo->{message}) {
local *F;
- open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
+ open F, ">$::prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
}
{
local *F;
local $\ = "\n";
- my $f = "$prefix/etc/yaboot.conf";
+ my $f = "$::prefix/etc/yaboot.conf";
open F, ">$f" or die "cannot create yaboot config file: $f";
log::l("writing yaboot config to $f");
@@ -543,7 +539,7 @@ sub install_yaboot($$$) {
if ($lilo->{boot}) {
print F "boot=$lilo->{boot}";
- my $of_dev = get_of_dev($prefix, $lilo->{boot});
+ my $of_dev = get_of_dev($lilo->{boot});
print F "ofboot=$of_dev";
} else {
die "no bootstrap partition defined."
@@ -562,10 +558,10 @@ sub install_yaboot($$$) {
if ($_->{type} eq "image") {
my $of_dev = '';
if (($boot !~ /$_->{root}/) && $boot) {
- $of_dev = get_of_dev($prefix, $boot);
+ $of_dev = get_of_dev($boot);
print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
} else {
- $of_dev = get_of_dev($prefix, $_->{root});
+ $of_dev = get_of_dev($_->{root});
print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
}
print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
@@ -581,25 +577,25 @@ sub install_yaboot($$$) {
print F "\tread-write" if $_->{'read-write'};
print F "\tread-only" if !$_->{'read-write'};
} else {
- my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
+ my $of_dev = get_of_dev($_->{kernel_or_dev});
print F "$_->{label}=$of_dev";
}
}
}
log::l("Installing boot loader...");
- my $f = "$prefix/tmp/of_boot_dev";
- my $of_dev = get_of_dev($prefix, $lilo->{boot});
+ my $f = "$::prefix/tmp/of_boot_dev";
+ my $of_dev = get_of_dev($lilo->{boot});
output($f, "$of_dev\n");
$::testing and return;
if (defined $install_steps_interactive::new_bootstrap) {
run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
}
- run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
- unlink "$prefix/tmp/.error";
+ run_program::rooted_or_die($::prefix, "/sbin/ybin", "2>", "/tmp/.error");
+ unlink "$::prefix/tmp/.error";
}
-sub install_silo($$$) {
- my ($prefix, $silo, $fstab) = @_;
+sub install_silo {
+ my ($silo, $fstab) = @_;
my $boot = fsedit::get_root($fstab, 'boot')->{device};
my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
@@ -628,13 +624,13 @@ sub install_silo($$$) {
if ($silo->{message}) {
local *F;
- open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
+ open F, ">$::prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
}
{
local *F;
local $\ = "\n";
- my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
- symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
+ my $f = "$::prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
+ symlinkf "../boot/silo.conf", "$::prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
open F, ">$f" or die "cannot create silo config file: $f";
log::l("writing silo config to $f");
@@ -662,9 +658,9 @@ sub install_silo($$$) {
}
log::l("Installing boot loader...");
$::testing and return;
- run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or
- run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
- unlink "$prefix/tmp/.error";
+ run_program::rooted($::prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or
+ run_program::rooted_or_die($::prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
+ unlink "$::prefix/tmp/.error";
#- try writing in the prom.
log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
@@ -680,7 +676,7 @@ sub make_label_lilo_compatible {
}
sub write_lilo_conf {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+ my ($lilo, $fstab, $hds) = @_;
$lilo->{prompt} = $lilo->{timeout};
delete $lilo->{linear} if $lilo->{lba32};
@@ -688,7 +684,7 @@ sub write_lilo_conf {
my $file2fullname = sub {
my ($file) = @_;
if (arch() =~ /ia64/) {
- (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
+ (my $part, $file) = fsedit::file2part($fstab, $file);
my %hds = map_index { $_ => "hd$::i" } map { $_->{device} }
sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
$hds->{$part->{device}} . ":" . $file;
@@ -722,7 +718,7 @@ sub write_lilo_conf {
{
local *F;
local $\ = "\n";
- my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
+ my $f = arch() =~ /ia64/ ? "$::prefix/boot/efi/elilo.conf" : "$::prefix/etc/lilo.conf";
open F, ">$f" or die "cannot create lilo config file: $f";
log::l("writing lilo config to $f");
@@ -781,18 +777,18 @@ sub write_lilo_conf {
}
sub install_lilo {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+ my ($lilo, $fstab, $hds) = @_;
$lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
- output("$prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
- symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$prefix/boot/message";
+ output("$::prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
+ symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$::prefix/boot/message";
- write_lilo_conf($prefix, $lilo, $fstab, $hds);
+ write_lilo_conf($lilo, $fstab, $hds);
log::l("Installing boot loader...");
$::testing and return;
- run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
- unlink "$prefix/tmp/.error";
+ run_program::rooted_or_die($::prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
+ unlink "$::prefix/tmp/.error";
}
sub dev2bios {
@@ -827,7 +823,7 @@ sub dev2grub {
}
sub write_grub_config {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+ my ($lilo, $fstab, $hds) = @_;
my %dev2bios = (
(map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
(map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
@@ -835,18 +831,18 @@ sub write_grub_config {
{
my %bios2dev = reverse %dev2bios;
- output "$prefix/boot/grub/device.map",
+ output "$::prefix/boot/grub/device.map",
join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
}
my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
my $file2grub = sub {
- my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
+ my ($part, $file) = fsedit::file2part($fstab, $_[0], 'keep_simple_symlinks');
dev2grub($part->{device}, \%dev2bios) . $file;
};
{
local *F;
local $\ = "\n";
- my $f = "$prefix/boot/grub/menu.lst";
+ my $f = "$::prefix/boot/grub/menu.lst";
open F, ">$f" or die "cannot create grub config file: $f";
log::l("writing grub config to $f");
@@ -860,7 +856,7 @@ sub write_grub_config {
#- since we use notail in reiserfs, altconfigfile is broken :-(
unless ($bootIsReiser) {
print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
- output "$prefix$once", " " x 100;
+ output "$::prefix$once", " " x 100;
}
map_index {
@@ -899,14 +895,14 @@ sub write_grub_config {
my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
my $f = "/boot/grub/install.sh";
- output "$prefix$f",
+ output "$::prefix$f",
"grub --device-map=/boot/grub/device.map --batch <<EOF
install $s1 d $dev $s2 p $m
quit
EOF
";
- output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
+ output "$::prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#-PO: and keep them smaller than 79 chars long
__("Welcome to GRUB the operating system chooser!"),
@@ -924,22 +920,22 @@ __("commands before booting, or \'c\' for a command-line."),
__("The highlighted entry will be booted automatically in %d seconds."),
);
- my $e = "$prefix/boot/.enough_space";
+ my $e = "$::prefix/boot/.enough_space";
output $e, 1; -s $e or die _("not enough room in /boot");
unlink $e;
$f;
}
sub install_grub {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+ my ($lilo, $fstab, $hds) = @_;
- my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
+ my $f = write_grub_config($lilo, $fstab, $hds);
log::l("Installing boot loader...");
$::testing and return;
- symlink "$prefix/boot", "/boot";
+ symlink "$::prefix/boot", "/boot";
run_program::run_or_die("sh", $f);
- unlink "$prefix/tmp/.error.grub", "/boot";
+ unlink "$::prefix/tmp/.error.grub", "/boot";
}
sub lnx4win_file {
@@ -948,11 +944,11 @@ sub lnx4win_file {
}
sub loadlin_cmd {
- my ($prefix, $lilo) = @_;
+ my ($lilo) = @_;
my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
- cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
- cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
+ cp_af("$::prefix$e->{kernel_or_dev}", "$::prefix/boot/vmlinuz") unless -e "$::prefix/boot/vmlinuz";
+ cp_af("$::prefix$e->{initrd}", "$::prefix/boot/initrd.img") unless -e "$::prefix/boot/initrd.img";
$e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}",
lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
@@ -960,7 +956,7 @@ sub loadlin_cmd {
}
sub install_loadlin {
- my ($prefix, $lilo, $fstab) = @_;
+ my ($lilo, $fstab) = @_;
my $boot;
($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
@@ -971,11 +967,11 @@ sub install_loadlin {
my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
log::l("winpart is $winpart->{device}");
- my $winhandle = any::inspect($winpart, $prefix, 'rw');
+ my $winhandle = any::inspect($winpart, $::prefix, 'rw');
my $windrive = $winhandle->{dir};
log::l("windrive is $windrive");
- my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
+ my ($label, $cmd) = loadlin_cmd($lilo);
#install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
#install_loadlin_desktop($lilo, $windrive);
@@ -1043,18 +1039,18 @@ IconIndex=0
sub install {
- my ($prefix, $lilo, $fstab, $hds) = @_;
+ my ($lilo, $fstab, $hds) = @_;
if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
if isThisFs('xfs', $p);
}
- $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
+ $lilo->{keytable} = keytable($lilo->{keytable});
if (exists $lilo->{methods}{grub}) {
#- when lilo is selected, we don't try to install grub.
#- just create the config file in case it may be useful
- eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
+ eval { write_grub_config($lilo, $fstab, $hds) };
}
my %l = grep_each { $::b } %{$lilo->{methods}};
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
index 523a6afa8..311c04ece 100644
--- a/perl-install/fsedit.pm
+++ b/perl-install/fsedit.pm
@@ -339,11 +339,11 @@ sub is_one_big_fat {
}
sub file2part {
- my ($prefix, $fstab, $file, $keep_simple_symlinks) = @_;
+ my ($fstab, $file, $keep_simple_symlinks) = @_;
my $part;
- $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$prefix$file") : expand_symlinks("$prefix$file");
- unless ($file =~ s/^$prefix//) {
+ $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$::prefix$file") : expand_symlinks("$::prefix$file");
+ unless ($file =~ s/^$::prefix//) {
my ($part) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
log::l("found $part->{mntpoint}");
$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index a7a0cf57c..9995f2b52 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -773,7 +773,7 @@ sub readBootloaderConfigBeforeInstall {
my ($image, $v);
require bootloader;
- add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : arch() =~ /ppc/ ? "/etc/yaboot.conf" : "/etc/lilo.conf"));
+ add2hash($o->{bootloader} ||= {}, bootloader::read());
#- since kernel or kernel-smp may not be upgraded, it should be checked
#- if there is a need to update existing lilo.conf entries by following
@@ -838,7 +838,7 @@ sub setupBootloaderBefore {
my $p = pkgs::packageByName($o->{packages}, $_);
$p && $p->flag_installed;
} 'Aurora', 'bootsplash';
- bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab},
+ bootloader::suggest($o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab},
vga_fb => ($force_vga || $vga && $need_fb) && $o->{vga},
quiet => $o->{meta_class} ne 'server');
bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3 && arch() !~ /ppc/;
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index 2425ac466..e207a8cac 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -876,7 +876,7 @@ sub install($$$;$$) {
return if $::g_auto_install || !scalar(@$toInstall);
#- for root loopback'ed /boot
- my $loop_boot = loopback::prepare_boot($prefix);
+ my $loop_boot = loopback::prepare_boot();
#- first stage to extract some important informations
#- about the packages selected. this is used to select