summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorPablo Saratxaga <pablo@mandriva.com>2003-03-04 15:44:01 +0000
committerPablo Saratxaga <pablo@mandriva.com>2003-03-04 15:44:01 +0000
commit07b39f8fac339d910bd564e77135acc14d78b547 (patch)
treed637e42f47e9ab5564dd50313f968d616e61c771 /perl-install
parent515e1e51f8c9e67bf201781a6bfd2bf61ca69667 (diff)
downloaddrakx-07b39f8fac339d910bd564e77135acc14d78b547.tar
drakx-07b39f8fac339d910bd564e77135acc14d78b547.tar.gz
drakx-07b39f8fac339d910bd564e77135acc14d78b547.tar.bz2
drakx-07b39f8fac339d910bd564e77135acc14d78b547.tar.xz
drakx-07b39f8fac339d910bd564e77135acc14d78b547.zip
updated pot file
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/share/po/no.po539
-rw-r--r--perl-install/share/po/sp.po618
2 files changed, 707 insertions, 450 deletions
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index f97c6c49f..3537b9ab5 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -1089,98 +1089,66 @@ msgstr ""
msgid ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries:\n"
+"or all of the following entries. Each entry is made up of the configuration\n"
+"item to be configured, followed by a quick summary of the current\n"
+"configuration. Click on the corresponding \"Configure\" button to change\n"
+"that.\n"
"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
+" * \"Keyboard\": check the current keyboard map configuration and change\n"
+"that if necessary.\n"
"\n"
" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the button and choose another one.\n"
+"country, click on the \"Configure\" button and choose another one. If your\n"
+"country is not in the first list shown, click the \"More\" button to get\n"
+"the complete country list.\n"
"\n"
" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"primary language you have chosen. But here, just as in your choice of a\n"
-"keyboard, you may not be in a country to which the chosen language\n"
-"corresponds. You may need to click on the \"Timezone\" button to\n"
-"configure the clock for the correct timezone.\n"
+"country you have chosen. You can click on the \"Configure\" button here if\n"
+"this is not correct.\n"
"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary.\n"
+"\n"
+" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" resolution. If that does not suits you, click on\n"
-"the button to reconfigure your graphical interface.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now, you can by clicking on this button.\n"
-"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
+" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
+"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
+"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on the button to\n"
-"try to configure it manually.\n"
+"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
+"to try to configure it manually.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with the card."
-msgstr ""
-"DrakX vil presentere en oppsummering av informasjon den har om systemet\n"
-"ditt. Avhengig av installert maskinvare, vil du ha noen av de fјlgende "
-"typene:\n"
-"\n"
-" * \"Mus\": Sjekk det gjeldende museoppsettet og klikk pх knappen for х "
-"endre den om nјdvendig.\n"
+"displayed here. You can click on \"Configure\" to change the parameters\n"
+"associated with the card.\n"
"\n"
-" * \"Tastatur\": Sjekk det gjeldende tastaturoppsettet og klikk pх knappen "
-"for х forandre det om nјdvendig.\n"
-"\n"
-" * \"Tidssone\": DrakX gjetter tidssonen din ut i fra sprхket du\n"
-"har valgt. Men her, som for valget av tastatur, er du kanskje ikke\n"
-"i det landet som valgt sprхk skulle tilsi.\n"
-"Derfor mх du kanskje klikke pх \"Timezone\" knappen for х konfigurere\n"
-"klokken til tidssonen der du er.\n"
-"\n"
-" * \"Skriver\": Klikk pх \"Ingen skriver\" knappen for х хpne skriver\n"
-"konfigurasjonsveiviseren. Konsulter kapittelet``Starter Guide'' for mer\n"
-"informasjon om х sette opp en ny skriver. Grensesnittet du fхr presentert\n"
-"der er lignende det som brukes under installasjonen.\n"
-"\n"
-" * \"Oppstartslaster\": Hvis du јnsker х endre din "
-"oppstartslasterkonfigurasjon,\n"
-"klikk pх denne knappen. Dette er forbeholdt avanserte brukere.\n"
-"\n"
-" * \"Grafisk grensesnitt\": som standard vil DrakX konfigurere ditt "
-"grafiske\n"
-"grensesnitt til \"800x600\" opplјsning. Hvis dette ikke passer deg, klikk "
-"pх\n"
-"knappen for х rekonfigurere ditt grafiske grensesnitt.\n"
+" * \"Network\": If you want to configure your Internet or local network\n"
+"access now.\n"
"\n"
-" * \"Nettverk\": Hvis du јnsker х konfigurere din internett eller lokale\n"
-"nettverkstilkobling nх, sх kan du klikke pх denne knappen.\n"
+" * \"Security Level\": this entry offers you to redefine the security level\n"
+"as set in a previous step ().\n"
"\n"
-" * \"Lydkort\": Hvis et lydkort blir oppdaget pх systemet ditt, blir det\n"
-"vist her. Hvis du oppdager at lydkortet som blir vist her ikke er det som\n"
-"faktisk er til stede pх ditt system, sх kan du klikke pх denne knappen for\n"
-"х velge en annen driver.\n"
+" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
+"a good idea to protect you from intrusions by setting up a firewall.\n"
+"Consult the corresponding section of the ``Starter Guide'' for details\n"
+"about firewall settings.\n"
"\n"
-" * \"TV kort\": Hvis et TV-kort blir oppdaget pх systemet ditt, blir det\n"
-"vist her. Hvis du har et TV-kort og det ikke blir oppdaget, klikk pх "
-"knappen\n"
-"for х prјve х konfigurere det manuelt.\n"
+" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
+"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"ISDN-kort: hvis et ISDN-kort blir oppdaget pх systemet ditt, blir\n"
-"det vist her. Du kan klikke pх knappen for х endre parameterene\n"
-"til kortet."
+" * \"Services\": you'll be able here to control finely which services will\n"
+"be run on your machine. If you plan to use this machine as a server it's a\n"
+"good idea to review this setup."
+msgstr ""
#: ../../help.pm:1
#, c-format
@@ -1361,19 +1329,14 @@ msgstr ""
"valgene."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"Because hardware detection is not foolproof, DrakX will ask you if you have\n"
-"a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI cards\n"
-"to choose from. Click \"No\" if you know that you have no SCSI hardware in\n"
-"your machine. If you're not sure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info \" and clicking\n"
-"the \"Next ->\". Examine the list of hardware and then click on the \"Next\n"
-"->\" button to return to the SCSI interface question.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
@@ -1411,7 +1374,7 @@ msgstr ""
"manuelt sette det opp for driveren."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
@@ -1421,7 +1384,7 @@ msgid ""
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq \" if this is your\n"
+"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
@@ -1482,86 +1445,8 @@ msgid ""
"\"Boot device\": in most cases, you will not change the default (\"First\n"
"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\").\n"
-"\n"
-"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-"handy.\n"
-"\n"
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
-"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
-"least two situations where having a boot floppy is critical:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
-"your system). If at some point you need to reinstall Windows, the Microsoft\n"
-"install process will rewrite the boot sector and remove your ability to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
-"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
-"fair number of system tools for restoring a system that has crashed due to\n"
-"a power failure, an unfortunate typing error, a forgotten root password, or\n"
-"any other reason.\n"
-"\n"
-"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-"floppy disk must be blank or have non-critical data on it - DrakX will\n"
-"format the floppy and will rewrite the whole disk."
-msgstr ""
-"LILO og grub er GNU/Linux oppstartslastere. Vanligvis vil dette steget\n"
-"vцre fullstendig automatisk. DrakX vil analysere diskens oppstartssektor\n"
-"og handle ut i fra hva den finner der:\n"
-"\n"
-" * hvis en Windows oppstartssektor blir funnet, sх vil den bli byttet ut "
-"med\n"
-"en grub eller LILO oppstartssektor. Pх denne mхten sх vil du vцre i stand\n"
-"til х laste enten GNU/Linux eller et annet OS.\n"
-"\n"
-" * hvis en grub eller LILO oppstartssektor blir funnet, sх vil den bli "
-"byttet\n"
-"ut med en ny en.\n"
-"\n"
-"Hvis den ikke klarer х finne ut et oppsett, sх vil DrakX spјrre deg om hvor\n"
-"oppstartslasteren skal plasseres.\n"
-"\n"
-"\"Oppstartsenhet\": I de fleste tilfeller, sх vil du ikke endre det "
-"forhхndsvalgte\n"
-"(\"Fјrste sektor pх disken (MBR)\"), men hvis du foretrekker det, sх kan\n"
-"oppstartslasteren bli installert pх en annen harddisk (feks. \"/dev/hdb\"), "
-"eller\n"
-"til og med pх en diskett (\"Pх diskett\").\n"
-"\n"
-"Ved х sjekke av \"Lag oppstartsdiskket\" sх vil du fх muligheten til х ha\n"
-"et ekstra oppstartsmedia for hхnden for sikkerhetsskyld.\n"
-"\n"
-"Mandrake Linux CD-ROMen har et innebygd redningsmodus. Du kan fх\n"
-"tilgang til det ved х starte opp fra CDen, og sх presse >> F1 << knappen\n"
-"og skrive >>rescue<< ved prompten. Hvis maskinen din ikke kan starte\n"
-"fra CDen, sх er det minst to tilfeller hvor det х ha en oppstartsdiskket er\n"
-"kritisk:\n"
-"\n"
-" * under installasjonen av oppstartslasteren, sх vil DrakX omskrive\n"
-"oppstartssektoren (MBR) pх din hoveddisk (med mindre du bruker en\n"
-"annen oppstartshхndterer), for х tillate deg х starte opp med enten\n"
-"Windows eller GNU/Linux (forutsatt at du har Windows pх ditt system).\n"
-"Hvis du skulle noen gang behјve х reinstallere Windows, sх vil\n"
-"Microsoft's installasjonsprosess omskrive oppstartssektoren og fjerne\n"
-"din mulighet til х starte GNU/Linux!\n"
-"\n"
-"\n"
-" * hvis et problem oppstхr som gjјr at du ikke kan starte GNU/Linux\n"
-"fra ahrddisken, sх vil denne disketten bli den eneste mхten du kan starte\n"
-"GNU/Linux pх. Den inneholder noen verktјy for х redde systemet som har\n"
-"krцsjet enten ved en strјmfeil, en uheldig skrivefeil, et glemt root-"
-"passord\n"
-"eller hvilken som helst annen grunn.\n"
-"\n"
-"Hvis du sier \"Nei\", sх vil du bli spurt om х sette inn disketten i "
-"stasjonen.\n"
-"Disketten mх vцre tom eller ha ingen viktige data pх den. - DrakX vil "
-"formatere\n"
-"disketten og skrive over den."
+"(\"On Floppy\")."
+msgstr ""
#: ../../help.pm:1
#, c-format
@@ -1808,7 +1693,7 @@ msgstr ""
"og bevegelsene er riktig."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
@@ -1821,9 +1706,14 @@ msgid ""
"as the default language in the tree view and \"Espanol\" in the Advanced\n"
"section.\n"
"\n"
-"Note that you're not limited to choosing a single additional language. Once\n"
-"you have selected additional locales, click the \"Next ->\" button to\n"
-"continue.\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"All\n"
+"languages\" box. Selecting support for a language means translations,\n"
+"fonts, spell checkers, etc. for that language will be installed.\n"
+"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
+"system to use unicode (UTF-8). Note however that this is an experimental\n"
+"feature. If you select different languages requiring different encoding the\n"
+"unicode support will be installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
@@ -1898,7 +1788,9 @@ msgstr ""
#, c-format
msgid ""
"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the button and choose another one."
+"country, click on the \"Configure\" button and choose another one. If your\n"
+"country is not in the first list shown, click the \"More\" button to get\n"
+"the complete country list."
msgstr ""
#: ../../help.pm:1
@@ -2127,15 +2019,13 @@ msgstr ""
"nјdsituasjoner."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use. Refer to the \"msec\"\n"
-"chapter of the ``Command Line Manual'' to get more information about the\n"
-"meaning of these levels.\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
@@ -2155,14 +2045,14 @@ msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
+"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
+"if you have a working Internet connection, or \"No\" if you prefer to\n"
+"install updated packages later.\n"
"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"Choosing \"Yes\" will display a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. A package-selection tree will\n"
"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package( s), or \"Cancel\" to abort."
+"the selected package(s), or \"Cancel\" to abort."
msgstr ""
#: ../../help.pm:1
@@ -2203,7 +2093,7 @@ msgid ""
"the bootloader menu, giving you the choice of which operating system to\n"
"start.\n"
"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"The \"Advanced\" button shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"that will automatically perform a whole installation without the help of an\n"
@@ -2261,7 +2151,7 @@ msgid ""
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see `` Erase entire disk'' solution)\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
"without the loss of any data, provided you previously defragment the\n"
"Windows partition and that it uses the FAT format. Backing up your data is\n"
@@ -2286,42 +2176,13 @@ msgid ""
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitionning\": choose this option if you want to\n"
-"manually partition your hard drive. Be careful -- it is a powerful but\n"
-"dangerous choice and you can very easily lose all your data. That's why\n"
-"this option is really only recommended if you have done something like this\n"
-"before and have some experience. For more instructions on how to use the\n"
-"DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n"
-"the ``Starter Guide''."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-"handy.\n"
-"\n"
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
-"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
-"least two situations where having a boot floppy is critical:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
-"your system). If at some point you need to reinstall Windows, the Microsoft\n"
-"install process will rewrite the boot sector and remove your ability to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
-"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
-"fair number of system tools for restoring a system that has crashed due to\n"
-"a power failure, an unfortunate typing error, a forgotten root password, or\n"
-"any other reason.\n"
-"\n"
-"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-"floppy disk must be blank or have non-critical data on it - DrakX will\n"
-"format the floppy and will rewrite the whole disk."
+" * \"Custom disk partitioning\": choose this option if you want to manually\n"
+"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
+"choice and you can very easily lose all your data. That's why this option\n"
+"is really only recommended if you have done something like this before and\n"
+"have some experience. For more instructions on how to use the DiskDrake\n"
+"utility, refer to the ``Managing Your Partitions '' section in the\n"
+"``Starter Guide''."
msgstr ""
#: ../../help.pm:1
@@ -2453,7 +2314,8 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
-"This step is used to choose which services you wish to start at boot time.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not always needed at\n"
@@ -2473,7 +2335,7 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
-"\"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation."
@@ -4086,6 +3948,12 @@ msgstr "Tjenester"
msgid "System"
msgstr "System"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Port"
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
@@ -16470,6 +16338,22 @@ msgstr "Grensesnitt %s (bruker modul %s)"
#: ../../standalone/drakgw:1
#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd-tjener"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
@@ -17464,7 +17348,7 @@ msgstr "Navn"
#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse have"
+msgid "the number of buttons the mouse has"
msgstr "leverandјrnavnet til prosessoren"
#: ../../standalone/harddrake2:1
@@ -18702,6 +18586,233 @@ msgid "Programs to manage your finances, such as gnucash"
msgstr "Programmer for х hхndtere dine finanser, sх som gnucash"
#~ msgid ""
+#~ "As a review, DrakX will present a summary of various information it has\n"
+#~ "about your system. Depending on your installed hardware, you may have "
+#~ "some\n"
+#~ "or all of the following entries:\n"
+#~ "\n"
+#~ " * \"Mouse\": check the current mouse configuration and click on the "
+#~ "button\n"
+#~ "to change it if necessary.\n"
+#~ "\n"
+#~ " * \"Keyboard\": check the current keyboard map configuration and click "
+#~ "on\n"
+#~ "the button to change that if necessary.\n"
+#~ "\n"
+#~ " * \"Country\": check the current country selection. If you are not in "
+#~ "this\n"
+#~ "country, click on the button and choose another one.\n"
+#~ "\n"
+#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
+#~ "primary language you have chosen. But here, just as in your choice of a\n"
+#~ "keyboard, you may not be in a country to which the chosen language\n"
+#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
+#~ "configure the clock for the correct timezone.\n"
+#~ "\n"
+#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
+#~ "printer\n"
+#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+#~ "Guide'' for more information on how to setup a new printer. The "
+#~ "interface\n"
+#~ "presented there is similar to the one used during installation.\n"
+#~ "\n"
+#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
+#~ "click that button. This should be reserved to advanced users.\n"
+#~ "\n"
+#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
+#~ "interface in \"800x600\" resolution. If that does not suits you, click "
+#~ "on\n"
+#~ "the button to reconfigure your graphical interface.\n"
+#~ "\n"
+#~ " * \"Network\": If you want to configure your Internet or local network\n"
+#~ "access now, you can by clicking on this button.\n"
+#~ "\n"
+#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
+#~ "displayed here. If you notice the sound card displayed is not the one "
+#~ "that\n"
+#~ "is actually present on your system, you can click on the button and "
+#~ "choose\n"
+#~ "another driver.\n"
+#~ "\n"
+#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+#~ "here. If you have a TV card and it is not detected, click on the button "
+#~ "to\n"
+#~ "try to configure it manually.\n"
+#~ "\n"
+#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
+#~ "displayed here. You can click on the button to change the parameters\n"
+#~ "associated with the card."
+#~ msgstr ""
+#~ "DrakX vil presentere en oppsummering av informasjon den har om systemet\n"
+#~ "ditt. Avhengig av installert maskinvare, vil du ha noen av de fјlgende "
+#~ "typene:\n"
+#~ "\n"
+#~ " * \"Mus\": Sjekk det gjeldende museoppsettet og klikk pх knappen for х "
+#~ "endre den om nјdvendig.\n"
+#~ "\n"
+#~ " * \"Tastatur\": Sjekk det gjeldende tastaturoppsettet og klikk pх "
+#~ "knappen for х forandre det om nјdvendig.\n"
+#~ "\n"
+#~ " * \"Tidssone\": DrakX gjetter tidssonen din ut i fra sprхket du\n"
+#~ "har valgt. Men her, som for valget av tastatur, er du kanskje ikke\n"
+#~ "i det landet som valgt sprхk skulle tilsi.\n"
+#~ "Derfor mх du kanskje klikke pх \"Timezone\" knappen for х konfigurere\n"
+#~ "klokken til tidssonen der du er.\n"
+#~ "\n"
+#~ " * \"Skriver\": Klikk pх \"Ingen skriver\" knappen for х хpne skriver\n"
+#~ "konfigurasjonsveiviseren. Konsulter kapittelet``Starter Guide'' for mer\n"
+#~ "informasjon om х sette opp en ny skriver. Grensesnittet du fхr "
+#~ "presentert\n"
+#~ "der er lignende det som brukes under installasjonen.\n"
+#~ "\n"
+#~ " * \"Oppstartslaster\": Hvis du јnsker х endre din "
+#~ "oppstartslasterkonfigurasjon,\n"
+#~ "klikk pх denne knappen. Dette er forbeholdt avanserte brukere.\n"
+#~ "\n"
+#~ " * \"Grafisk grensesnitt\": som standard vil DrakX konfigurere ditt "
+#~ "grafiske\n"
+#~ "grensesnitt til \"800x600\" opplјsning. Hvis dette ikke passer deg, klikk "
+#~ "pх\n"
+#~ "knappen for х rekonfigurere ditt grafiske grensesnitt.\n"
+#~ "\n"
+#~ " * \"Nettverk\": Hvis du јnsker х konfigurere din internett eller lokale\n"
+#~ "nettverkstilkobling nх, sх kan du klikke pх denne knappen.\n"
+#~ "\n"
+#~ " * \"Lydkort\": Hvis et lydkort blir oppdaget pх systemet ditt, blir det\n"
+#~ "vist her. Hvis du oppdager at lydkortet som blir vist her ikke er det "
+#~ "som\n"
+#~ "faktisk er til stede pх ditt system, sх kan du klikke pх denne knappen "
+#~ "for\n"
+#~ "х velge en annen driver.\n"
+#~ "\n"
+#~ " * \"TV kort\": Hvis et TV-kort blir oppdaget pх systemet ditt, blir det\n"
+#~ "vist her. Hvis du har et TV-kort og det ikke blir oppdaget, klikk pх "
+#~ "knappen\n"
+#~ "for х prјve х konfigurere det manuelt.\n"
+#~ "\n"
+#~ " * \"ISDN-kort: hvis et ISDN-kort blir oppdaget pх systemet ditt, blir\n"
+#~ "det vist her. Du kan klikke pх knappen for х endre parameterene\n"
+#~ "til kortet."
+
+#~ msgid ""
+#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
+#~ "what it finds there:\n"
+#~ "\n"
+#~ " * if a Windows boot sector is found, it will replace it with a grub/"
+#~ "LILO\n"
+#~ "boot sector. This way you will be able to load either GNU/Linux or "
+#~ "another\n"
+#~ "OS.\n"
+#~ "\n"
+#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
+#~ "one.\n"
+#~ "\n"
+#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
+#~ "bootloader.\n"
+#~ "\n"
+#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
+#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
+#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
+#~ "disk\n"
+#~ "(\"On Floppy\").\n"
+#~ "\n"
+#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
+#~ "handy.\n"
+#~ "\n"
+#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
+#~ "by\n"
+#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
+#~ ">>rescue<<\n"
+#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
+#~ "at\n"
+#~ "least two situations where having a boot floppy is critical:\n"
+#~ "\n"
+#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
+#~ "(MBR)\n"
+#~ "of your main disk (unless you are using another boot manager), to allow "
+#~ "you\n"
+#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
+#~ "on\n"
+#~ "your system). If at some point you need to reinstall Windows, the "
+#~ "Microsoft\n"
+#~ "install process will rewrite the boot sector and remove your ability to\n"
+#~ "start GNU/Linux!\n"
+#~ "\n"
+#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
+#~ "disk,\n"
+#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
+#~ "a\n"
+#~ "fair number of system tools for restoring a system that has crashed due "
+#~ "to\n"
+#~ "a power failure, an unfortunate typing error, a forgotten root password, "
+#~ "or\n"
+#~ "any other reason.\n"
+#~ "\n"
+#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
+#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
+#~ "format the floppy and will rewrite the whole disk."
+#~ msgstr ""
+#~ "LILO og grub er GNU/Linux oppstartslastere. Vanligvis vil dette steget\n"
+#~ "vцre fullstendig automatisk. DrakX vil analysere diskens oppstartssektor\n"
+#~ "og handle ut i fra hva den finner der:\n"
+#~ "\n"
+#~ " * hvis en Windows oppstartssektor blir funnet, sх vil den bli byttet ut "
+#~ "med\n"
+#~ "en grub eller LILO oppstartssektor. Pх denne mхten sх vil du vцre i "
+#~ "stand\n"
+#~ "til х laste enten GNU/Linux eller et annet OS.\n"
+#~ "\n"
+#~ " * hvis en grub eller LILO oppstartssektor blir funnet, sх vil den bli "
+#~ "byttet\n"
+#~ "ut med en ny en.\n"
+#~ "\n"
+#~ "Hvis den ikke klarer х finne ut et oppsett, sх vil DrakX spјrre deg om "
+#~ "hvor\n"
+#~ "oppstartslasteren skal plasseres.\n"
+#~ "\n"
+#~ "\"Oppstartsenhet\": I de fleste tilfeller, sх vil du ikke endre det "
+#~ "forhхndsvalgte\n"
+#~ "(\"Fјrste sektor pх disken (MBR)\"), men hvis du foretrekker det, sх kan\n"
+#~ "oppstartslasteren bli installert pх en annen harddisk (feks. \"/dev/hdb"
+#~ "\"), eller\n"
+#~ "til og med pх en diskett (\"Pх diskett\").\n"
+#~ "\n"
+#~ "Ved х sjekke av \"Lag oppstartsdiskket\" sх vil du fх muligheten til х "
+#~ "ha\n"
+#~ "et ekstra oppstartsmedia for hхnden for sikkerhetsskyld.\n"
+#~ "\n"
+#~ "Mandrake Linux CD-ROMen har et innebygd redningsmodus. Du kan fх\n"
+#~ "tilgang til det ved х starte opp fra CDen, og sх presse >> F1 << knappen\n"
+#~ "og skrive >>rescue<< ved prompten. Hvis maskinen din ikke kan starte\n"
+#~ "fra CDen, sх er det minst to tilfeller hvor det х ha en oppstartsdiskket "
+#~ "er\n"
+#~ "kritisk:\n"
+#~ "\n"
+#~ " * under installasjonen av oppstartslasteren, sх vil DrakX omskrive\n"
+#~ "oppstartssektoren (MBR) pх din hoveddisk (med mindre du bruker en\n"
+#~ "annen oppstartshхndterer), for х tillate deg х starte opp med enten\n"
+#~ "Windows eller GNU/Linux (forutsatt at du har Windows pх ditt system).\n"
+#~ "Hvis du skulle noen gang behјve х reinstallere Windows, sх vil\n"
+#~ "Microsoft's installasjonsprosess omskrive oppstartssektoren og fjerne\n"
+#~ "din mulighet til х starte GNU/Linux!\n"
+#~ "\n"
+#~ "\n"
+#~ " * hvis et problem oppstхr som gjјr at du ikke kan starte GNU/Linux\n"
+#~ "fra ahrddisken, sх vil denne disketten bli den eneste mхten du kan "
+#~ "starte\n"
+#~ "GNU/Linux pх. Den inneholder noen verktјy for х redde systemet som har\n"
+#~ "krцsjet enten ved en strјmfeil, en uheldig skrivefeil, et glemt root-"
+#~ "passord\n"
+#~ "eller hvilken som helst annen grunn.\n"
+#~ "\n"
+#~ "Hvis du sier \"Nei\", sх vil du bli spurt om х sette inn disketten i "
+#~ "stasjonen.\n"
+#~ "Disketten mх vцre tom eller ha ingen viktige data pх den. - DrakX vil "
+#~ "formatere\n"
+#~ "disketten og skrive over den."
+
+#~ msgid ""
#~ "The following printers are configured. Double-click on a printer to "
#~ "change its settings; to make it the default printer; to view information "
#~ "about it; or to make a printer on a remote CUPS server available for Star "
diff --git a/perl-install/share/po/sp.po b/perl-install/share/po/sp.po
index 448afd8bd..51b47515e 100644
--- a/perl-install/share/po/sp.po
+++ b/perl-install/share/po/sp.po
@@ -1116,85 +1116,66 @@ msgstr ""
msgid ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries:\n"
+"or all of the following entries. Each entry is made up of the configuration\n"
+"item to be configured, followed by a quick summary of the current\n"
+"configuration. Click on the corresponding \"Configure\" button to change\n"
+"that.\n"
"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
+" * \"Keyboard\": check the current keyboard map configuration and change\n"
+"that if necessary.\n"
"\n"
" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the button and choose another one.\n"
+"country, click on the \"Configure\" button and choose another one. If your\n"
+"country is not in the first list shown, click the \"More\" button to get\n"
+"the complete country list.\n"
"\n"
" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"primary language you have chosen. But here, just as in your choice of a\n"
-"keyboard, you may not be in a country to which the chosen language\n"
-"corresponds. You may need to click on the \"Timezone\" button to\n"
-"configure the clock for the correct timezone.\n"
+"country you have chosen. You can click on the \"Configure\" button here if\n"
+"this is not correct.\n"
+"\n"
+" * \"Mouse\": check the current mouse configuration and click on the button\n"
+"to change it if necessary.\n"
"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" resolution. If that does not suits you, click on\n"
-"the button to reconfigure your graphical interface.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now, you can by clicking on this button.\n"
-"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
+" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
+"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
+"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on the button to\n"
-"try to configure it manually.\n"
+"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
+"to try to configure it manually.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with the card."
-msgstr ""
-"Слично списку, DrakX ће приказати зажетак различитих инормација о\n"
-"вашем систему. У зависности од инстлараног хардвера, можете имати неке\n"
-"или све уносе:\n"
-"\n"
-" * \"Миш\": проверите тренутне поставке за миша и кликните на тастер\n"
-"да бих променили уколико је неопходно.\n"
-"\n"
-" * \"Тастатура\": проверите тренутни расоред тастатуре tion и кликните на\n"
-"тастер да би направили измене уколико су потребне.\n"
+"displayed here. You can click on \"Configure\" to change the parameters\n"
+"associated with the card.\n"
"\n"
-" * \"Држава\": проверите тренутни унос за земљу. Уколико се не налазите\n"
-"у овој земљи, кликните на тастер и изаберите другу.\n"
-"\n"
-" * \"Временска зона\": DrakX, по default-у, погађа вашу временску зону у \n"
-"зависности који се језик\n"
-"одабрали. Али опет, можда сте изабрали тастатуру која се разликује\n"
-"од тастатуре земље коју сте навели.\n"
-"Мораћете да кликнете на тастер \"Временска зона\" да би\n"
-"подесили часовник у складу са временском зоном у којој се налазите.\n"
+" * \"Network\": If you want to configure your Internet or local network\n"
+"access now.\n"
"\n"
-" * \"Штампач\": килком на тастер \"Штампач\" покренућете чаробњака за\n"
-"конфигурисање штампача. Прочитајте одговоарајуће поглавље у ``Starter\n"
-"Guide'' за више информација о томе како подесити нови штампач. Интерфејс\n"
-"који је овде приказан је сличан оном који се користи при инсталацији;\n"
+" * \"Security Level\": this entry offers you to redefine the security level\n"
+"as set in a previous step ().\n"
"\n"
-" * \"Звучна картица\": уколико је звучна картица детектована, онда је\n"
-"овде приказана. Нису могуће промене у току инсталације.\n"
+" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
+"a good idea to protect you from intrusions by setting up a firewall.\n"
+"Consult the corresponding section of the ``Starter Guide'' for details\n"
+"about firewall settings.\n"
"\n"
-" * \"TV картица\": уколико је TV картица детектована, онда је\n"
-"приказана овде. Нису могуће промене у току инсталације.\n"
+" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
+"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"ISDN картица\": уколико је ISDN картица детектована, онда је\n"
-"приказана овде. Можете кликнути на тестер да би променили параметре\n"
-"који су везани за њу."
+" * \"Services\": you'll be able here to control finely which services will\n"
+"be run on your machine. If you plan to use this machine as a server it's a\n"
+"good idea to review this setup."
+msgstr ""
#: ../../help.pm:1
#, c-format
@@ -1391,19 +1372,14 @@ msgstr ""
"ознaчен сa \"*\", уколик притиснетe [Tab] да би видели стартну селекциjу."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"Because hardware detection is not foolproof, DrakX will ask you if you have\n"
-"a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI cards\n"
-"to choose from. Click \"No\" if you know that you have no SCSI hardware in\n"
-"your machine. If you're not sure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info \" and clicking\n"
-"the \"Next ->\". Examine the list of hardware and then click on the \"Next\n"
-"->\" button to return to the SCSI interface question.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
@@ -1446,7 +1422,7 @@ msgstr ""
"веб саjтa (уколико имате приступ интернету)."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
@@ -1456,7 +1432,7 @@ msgid ""
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq \" if this is your\n"
+"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
@@ -1522,87 +1498,8 @@ msgid ""
"\"Boot device\": in most cases, you will not change the default (\"First\n"
"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\").\n"
-"\n"
-"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-"handy.\n"
-"\n"
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
-"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
-"least two situations where having a boot floppy is critical:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
-"your system). If at some point you need to reinstall Windows, the Microsoft\n"
-"install process will rewrite the boot sector and remove your ability to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
-"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
-"fair number of system tools for restoring a system that has crashed due to\n"
-"a power failure, an unfortunate typing error, a forgotten root password, or\n"
-"any other reason.\n"
-"\n"
-"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-"floppy disk must be blank or have non-critical data on it - DrakX will\n"
-"format the floppy and will rewrite the whole disk."
-msgstr ""
-"LILO и grub су GNU/Linux стартери. Обично је овај корак\n"
-"аутоматизован. DrakX ће анализирати boot сектор диска и понашаће се у "
-"складу \n"
-"са оним шта пронађе:\n"
-"\n"
-" * уколико пронађе Windows boot сектор, он ће га заменити са grub/LILO\n"
-"boot сектор. На овај начин ћете бити у могућности да покренете или GNU/Linux "
-"или неки\n"
-"други OS.\n"
-"\n"
-" * уколико пронађе grub или LILO boot сектор, он ће га заменити са новим\n"
-"новим.\n"
-"\n"
-"Уколико не може да одреди које је боот сектор у питању, DrakX ће вас питати "
-"где да смести\n"
-"стартер.\n"
-"\n"
-"\"Boot уређај\": у већини случајева, нећете морати да мењате default поставку"
-"(\"Први\n"
-"сектор на диску (MBR)\"), али ако то желите, стартер се може инсталирати\n"
-"на други хард диск (\"/dev/hdb\"), или чак на дискету \n"
-"(\"На дискету\").\n"
-"\n"
-"Означите \"Крирај стартни диск\" да би себи омогућили стартни медиј за\n"
-"не дај боже јер то може бити једини начин да подигнете систем.\n"
-"\n"
-"Mandrake Linux CDROM има уграђен спасилачки мод. Можете му приступити\n"
-"подизаем система преко CDROM-а, притисните >>F1<< тастер при стартању и "
-"укуцајте >>rescue<< у\n"
-"промпту. Уколико не можете да бутујете са CDROM-а, требали\n"
-"би да се вратите на ове кораке у најмање две ситуације:\n"
-"\n"
-" * када инсталирате стартер, DrakX ће преписати садржај boot сектора (MBR)\n"
-"вашег основног диска (осим уколико не користите неки други стартер) да би "
-"могли \n"
-"да покренете или Windows или GNU/Linux (претпостављајући да имате инстлиран "
-"Windows на\n"
-"вашем систему). Уколико треба да реинсталирате Windows, Microsoft-ов "
-"инсталациони\n"
-"процес ће опет преписати boot сектор, па она нећете бити у могућности\n"
-"да покрене GNU/Linux!\n"
-"\n"
-" * уколико се проблем јавља и не можете да покренете GNU/Linux са хард "
-"диска,\n"
-"овај флопи диск ће онда бити једини начин за стартање GNU/Linux-а. Он\n"
-"садржи добар број системских алата за обнову система, који се\n"
-"срушио услед нестанка ел.енергије, несретне грешке у куцању, погрешне\n"
-"лозинке, или било ког другог разлога.\n"
-"\n"
-"Уколико кажете \"Да\", тражиће се од вас да убаците празну дискету\n"
-"у уређај. Флопи дискета мора бити празна или да садржи податке који вам "
-"нису неопходни\n"
-"Нема потребе да је форматирате јер ће DrakX сам поново уписати\n"
-"целу дискету."
+"(\"On Floppy\")."
+msgstr ""
#: ../../help.pm:1
#, c-format
@@ -1840,7 +1737,7 @@ msgstr ""
"померање миша."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
@@ -1853,9 +1750,14 @@ msgid ""
"as the default language in the tree view and \"Espanol\" in the Advanced\n"
"section.\n"
"\n"
-"Note that you're not limited to choosing a single additional language. Once\n"
-"you have selected additional locales, click the \"Next ->\" button to\n"
-"continue.\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"All\n"
+"languages\" box. Selecting support for a language means translations,\n"
+"fonts, spell checkers, etc. for that language will be installed.\n"
+"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
+"system to use unicode (UTF-8). Note however that this is an experimental\n"
+"feature. If you select different languages requiring different encoding the\n"
+"unicode support will be installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
@@ -1974,10 +1876,12 @@ msgstr ""
"Mandrake Linux пре \"8.1\" није препоручљиво."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the button and choose another one."
+"country, click on the \"Configure\" button and choose another one. If your\n"
+"country is not in the first list shown, click the \"More\" button to get\n"
+"the complete country list."
msgstr ""
"\"Држава\": проверава тренутни избор земље. Уколико се не налазите у овојs\n"
"држави, кликните на тастер и и изаберите другу."
@@ -2198,15 +2102,13 @@ msgstr ""
"резервног кернела и ramdisk image за стартaње у хитним ситуациjамa."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use. Refer to the \"msec\"\n"
-"chapter of the ``Command Line Manual'' to get more information about the\n"
-"meaning of these levels.\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
@@ -2221,19 +2123,19 @@ msgstr ""
"Уколико не знате да изаберете, задржите default поставку."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
+"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
+"if you have a working Internet connection, or \"No\" if you prefer to\n"
+"install updated packages later.\n"
"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
+"Choosing \"Yes\" will display a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. A package-selection tree will\n"
"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package( s), or \"Cancel\" to abort."
+"the selected package(s), or \"Cancel\" to abort."
msgstr ""
"У време када будете инсталирали Mandrake Linux, врло је могуће да ће неки\n"
"пакети бити ажурирани у односу на иницијално издање. Неки багови могу \n"
@@ -2308,7 +2210,7 @@ msgstr ""
"да ли имају лоше секторе."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
@@ -2316,7 +2218,7 @@ msgid ""
"the bootloader menu, giving you the choice of which operating system to\n"
"start.\n"
"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+"The \"Advanced\" button shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"that will automatically perform a whole installation without the help of an\n"
@@ -2384,7 +2286,7 @@ msgstr ""
"\"mformat a:\")"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2415,7 +2317,7 @@ msgid ""
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see `` Erase entire disk'' solution)\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
"without the loss of any data, provided you previously defragment the\n"
"Windows partition and that it uses the FAT format. Backing up your data is\n"
@@ -2440,13 +2342,13 @@ msgid ""
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitionning\": choose this option if you want to\n"
-"manually partition your hard drive. Be careful -- it is a powerful but\n"
-"dangerous choice and you can very easily lose all your data. That's why\n"
-"this option is really only recommended if you have done something like this\n"
-"before and have some experience. For more instructions on how to use the\n"
-"DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n"
-"the ``Starter Guide''."
+" * \"Custom disk partitioning\": choose this option if you want to manually\n"
+"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
+"choice and you can very easily lose all your data. That's why this option\n"
+"is really only recommended if you have done something like this before and\n"
+"have some experience. For more instructions on how to use the DiskDrake\n"
+"utility, refer to the ``Managing Your Partitions '' section in the\n"
+"``Starter Guide''."
msgstr ""
"У овом тренутку, морате да изаберете где ћете инсталирати\n"
"Mandrake Linux оперативни систем на вaш хард диск. Уколико jе празан или\n"
@@ -2535,63 +2437,6 @@ msgstr ""
"``Почетнички водич''."
#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-"handy.\n"
-"\n"
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
-"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
-"least two situations where having a boot floppy is critical:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
-"your system). If at some point you need to reinstall Windows, the Microsoft\n"
-"install process will rewrite the boot sector and remove your ability to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
-"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
-"fair number of system tools for restoring a system that has crashed due to\n"
-"a power failure, an unfortunate typing error, a forgotten root password, or\n"
-"any other reason.\n"
-"\n"
-"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-"floppy disk must be blank or have non-critical data on it - DrakX will\n"
-"format the floppy and will rewrite the whole disk."
-msgstr ""
-"Mandrake Linux CDROM има уграђен спасилачки мод. Можете му приступити\n"
-"подизаем система преко CDROM-а, притисните >>F1<< тастер при стартању и "
-"укуцајте >>rescue<< у\n"
-"промпту. Уколико не можете да бутујете са CDROM-а, требали\n"
-"би да се вратите на ове кораке у најмање две ситуације:\n"
-"\n"
-" * када инсталирате стартер, DrakX ће преписати садржај boot сектора (MBR)\n"
-"вашег основног диска (осим уколико не користите неки други стартер) да би "
-"могли \n"
-"да покренете или Windows или GNU/Linux (претпостављајући да имате инстлиран "
-"Windows на\n"
-"вашем систему). Уколико треба да реинсталирате Windows, Microsoft-ов "
-"инсталациони\n"
-"процес ће опет преписати boot сектор, па она нећете бити у могућности\n"
-"да покрене GNU/Linux!\n"
-"\n"
-" * уколико се проблем јавља и не можете да покренете GNU/Linux са хард "
-"диска,\n"
-"овај флопи диск ће онда бити једини начин за стартање GNU/Linux-а. Он\n"
-"садржи добар број системских алата за обнову система, који се\n"
-"срушио услед нестанка ел.енергије, несретне грешке у куцању, погрешне\n"
-"лозинке, или било ког другог разлога.\n"
-"\n"
-"Уколико кажете \"Да\", тражиће се од вас да убаците празну дискету\n"
-"у уређај. Флопи дискета мора бити празна или да садржи податке који вам "
-"нису неопходни\n"
-"Нема потребе да је форматирате јер ће DrakX сам поново уписати\n"
-"целу дискету."
-
-#: ../../help.pm:1
#, c-format
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
@@ -2767,9 +2612,10 @@ msgstr ""
"стране других машина на вашој локалној мрежи."
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"This step is used to choose which services you wish to start at boot time.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not always needed at\n"
@@ -2806,9 +2652,9 @@ msgstr ""
"!!"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"\"Printer\": clicking on the \"No Printer\" button will open the printer\n"
+"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation."
@@ -4452,6 +4298,12 @@ msgstr "Сервиси"
msgid "System"
msgstr "Систем"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s (Порт %s)"
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
@@ -17505,6 +17357,22 @@ msgid "Interface %s (using module %s)"
msgstr "Интерфеjс %s (користeћи модул %s)"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd Сервис"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
@@ -18571,7 +18439,7 @@ msgstr "Име "
#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse have"
+msgid "the number of buttons the mouse has"
msgstr "Број процесора"
#: ../../standalone/harddrake2:1
@@ -19815,6 +19683,284 @@ msgid "Programs to manage your finances, such as gnucash"
msgstr "Програми за управљaње вaшим финансиjамa, као што jе gnucash"
#~ msgid ""
+#~ "As a review, DrakX will present a summary of various information it has\n"
+#~ "about your system. Depending on your installed hardware, you may have "
+#~ "some\n"
+#~ "or all of the following entries:\n"
+#~ "\n"
+#~ " * \"Mouse\": check the current mouse configuration and click on the "
+#~ "button\n"
+#~ "to change it if necessary.\n"
+#~ "\n"
+#~ " * \"Keyboard\": check the current keyboard map configuration and click "
+#~ "on\n"
+#~ "the button to change that if necessary.\n"
+#~ "\n"
+#~ " * \"Country\": check the current country selection. If you are not in "
+#~ "this\n"
+#~ "country, click on the button and choose another one.\n"
+#~ "\n"
+#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
+#~ "primary language you have chosen. But here, just as in your choice of a\n"
+#~ "keyboard, you may not be in a country to which the chosen language\n"
+#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
+#~ "configure the clock for the correct timezone.\n"
+#~ "\n"
+#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
+#~ "printer\n"
+#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+#~ "Guide'' for more information on how to setup a new printer. The "
+#~ "interface\n"
+#~ "presented there is similar to the one used during installation.\n"
+#~ "\n"
+#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
+#~ "click that button. This should be reserved to advanced users.\n"
+#~ "\n"
+#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
+#~ "interface in \"800x600\" resolution. If that does not suits you, click "
+#~ "on\n"
+#~ "the button to reconfigure your graphical interface.\n"
+#~ "\n"
+#~ " * \"Network\": If you want to configure your Internet or local network\n"
+#~ "access now, you can by clicking on this button.\n"
+#~ "\n"
+#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
+#~ "displayed here. If you notice the sound card displayed is not the one "
+#~ "that\n"
+#~ "is actually present on your system, you can click on the button and "
+#~ "choose\n"
+#~ "another driver.\n"
+#~ "\n"
+#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
+#~ "here. If you have a TV card and it is not detected, click on the button "
+#~ "to\n"
+#~ "try to configure it manually.\n"
+#~ "\n"
+#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
+#~ "displayed here. You can click on the button to change the parameters\n"
+#~ "associated with the card."
+#~ msgstr ""
+#~ "Слично списку, DrakX ће приказати зажетак различитих инормација о\n"
+#~ "вашем систему. У зависности од инстлараног хардвера, можете имати неке\n"
+#~ "или све уносе:\n"
+#~ "\n"
+#~ " * \"Миш\": проверите тренутне поставке за миша и кликните на тастер\n"
+#~ "да бих променили уколико је неопходно.\n"
+#~ "\n"
+#~ " * \"Тастатура\": проверите тренутни расоред тастатуре tion и кликните "
+#~ "на\n"
+#~ "тастер да би направили измене уколико су потребне.\n"
+#~ "\n"
+#~ " * \"Држава\": проверите тренутни унос за земљу. Уколико се не налазите\n"
+#~ "у овој земљи, кликните на тастер и изаберите другу.\n"
+#~ "\n"
+#~ " * \"Временска зона\": DrakX, по default-у, погађа вашу временску зону "
+#~ "у \n"
+#~ "зависности који се језик\n"
+#~ "одабрали. Али опет, можда сте изабрали тастатуру која се разликује\n"
+#~ "од тастатуре земље коју сте навели.\n"
+#~ "Мораћете да кликнете на тастер \"Временска зона\" да би\n"
+#~ "подесили часовник у складу са временском зоном у којој се налазите.\n"
+#~ "\n"
+#~ " * \"Штампач\": килком на тастер \"Штампач\" покренућете чаробњака за\n"
+#~ "конфигурисање штампача. Прочитајте одговоарајуће поглавље у ``Starter\n"
+#~ "Guide'' за више информација о томе како подесити нови штампач. Интерфејс\n"
+#~ "који је овде приказан је сличан оном који се користи при инсталацији;\n"
+#~ "\n"
+#~ " * \"Звучна картица\": уколико је звучна картица детектована, онда је\n"
+#~ "овде приказана. Нису могуће промене у току инсталације.\n"
+#~ "\n"
+#~ " * \"TV картица\": уколико је TV картица детектована, онда је\n"
+#~ "приказана овде. Нису могуће промене у току инсталације.\n"
+#~ "\n"
+#~ " * \"ISDN картица\": уколико је ISDN картица детектована, онда је\n"
+#~ "приказана овде. Можете кликнути на тестер да би променили параметре\n"
+#~ "који су везани за њу."
+
+#~ msgid ""
+#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
+#~ "what it finds there:\n"
+#~ "\n"
+#~ " * if a Windows boot sector is found, it will replace it with a grub/"
+#~ "LILO\n"
+#~ "boot sector. This way you will be able to load either GNU/Linux or "
+#~ "another\n"
+#~ "OS.\n"
+#~ "\n"
+#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
+#~ "one.\n"
+#~ "\n"
+#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
+#~ "bootloader.\n"
+#~ "\n"
+#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
+#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
+#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
+#~ "disk\n"
+#~ "(\"On Floppy\").\n"
+#~ "\n"
+#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
+#~ "handy.\n"
+#~ "\n"
+#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
+#~ "by\n"
+#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
+#~ ">>rescue<<\n"
+#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
+#~ "at\n"
+#~ "least two situations where having a boot floppy is critical:\n"
+#~ "\n"
+#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
+#~ "(MBR)\n"
+#~ "of your main disk (unless you are using another boot manager), to allow "
+#~ "you\n"
+#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
+#~ "on\n"
+#~ "your system). If at some point you need to reinstall Windows, the "
+#~ "Microsoft\n"
+#~ "install process will rewrite the boot sector and remove your ability to\n"
+#~ "start GNU/Linux!\n"
+#~ "\n"
+#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
+#~ "disk,\n"
+#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
+#~ "a\n"
+#~ "fair number of system tools for restoring a system that has crashed due "
+#~ "to\n"
+#~ "a power failure, an unfortunate typing error, a forgotten root password, "
+#~ "or\n"
+#~ "any other reason.\n"
+#~ "\n"
+#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
+#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
+#~ "format the floppy and will rewrite the whole disk."
+#~ msgstr ""
+#~ "LILO и grub су GNU/Linux стартери. Обично је овај корак\n"
+#~ "аутоматизован. DrakX ће анализирати boot сектор диска и понашаће се у "
+#~ "складу \n"
+#~ "са оним шта пронађе:\n"
+#~ "\n"
+#~ " * уколико пронађе Windows boot сектор, он ће га заменити са grub/LILO\n"
+#~ "boot сектор. На овај начин ћете бити у могућности да покренете или GNU/"
+#~ "Linux или неки\n"
+#~ "други OS.\n"
+#~ "\n"
+#~ " * уколико пронађе grub или LILO boot сектор, он ће га заменити са новим\n"
+#~ "новим.\n"
+#~ "\n"
+#~ "Уколико не може да одреди које је боот сектор у питању, DrakX ће вас "
+#~ "питати где да смести\n"
+#~ "стартер.\n"
+#~ "\n"
+#~ "\"Boot уређај\": у већини случајева, нећете морати да мењате default "
+#~ "поставку(\"Први\n"
+#~ "сектор на диску (MBR)\"), али ако то желите, стартер се може инсталирати\n"
+#~ "на други хард диск (\"/dev/hdb\"), или чак на дискету \n"
+#~ "(\"На дискету\").\n"
+#~ "\n"
+#~ "Означите \"Крирај стартни диск\" да би себи омогућили стартни медиј за\n"
+#~ "не дај боже јер то може бити једини начин да подигнете систем.\n"
+#~ "\n"
+#~ "Mandrake Linux CDROM има уграђен спасилачки мод. Можете му приступити\n"
+#~ "подизаем система преко CDROM-а, притисните >>F1<< тастер при стартању и "
+#~ "укуцајте >>rescue<< у\n"
+#~ "промпту. Уколико не можете да бутујете са CDROM-а, требали\n"
+#~ "би да се вратите на ове кораке у најмање две ситуације:\n"
+#~ "\n"
+#~ " * када инсталирате стартер, DrakX ће преписати садржај boot сектора "
+#~ "(MBR)\n"
+#~ "вашег основног диска (осим уколико не користите неки други стартер) да би "
+#~ "могли \n"
+#~ "да покренете или Windows или GNU/Linux (претпостављајући да имате "
+#~ "инстлиран Windows на\n"
+#~ "вашем систему). Уколико треба да реинсталирате Windows, Microsoft-ов "
+#~ "инсталациони\n"
+#~ "процес ће опет преписати boot сектор, па она нећете бити у могућности\n"
+#~ "да покрене GNU/Linux!\n"
+#~ "\n"
+#~ " * уколико се проблем јавља и не можете да покренете GNU/Linux са хард "
+#~ "диска,\n"
+#~ "овај флопи диск ће онда бити једини начин за стартање GNU/Linux-а. Он\n"
+#~ "садржи добар број системских алата за обнову система, који се\n"
+#~ "срушио услед нестанка ел.енергије, несретне грешке у куцању, погрешне\n"
+#~ "лозинке, или било ког другог разлога.\n"
+#~ "\n"
+#~ "Уколико кажете \"Да\", тражиће се од вас да убаците празну дискету\n"
+#~ "у уређај. Флопи дискета мора бити празна или да садржи податке који вам "
+#~ "нису неопходни\n"
+#~ "Нема потребе да је форматирате јер ће DrakX сам поново уписати\n"
+#~ "целу дискету."
+
+#, fuzzy
+#~ msgid ""
+#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
+#~ "handy.\n"
+#~ "\n"
+#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
+#~ "by\n"
+#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
+#~ ">>rescue<<\n"
+#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
+#~ "at\n"
+#~ "least two situations where having a boot floppy is critical:\n"
+#~ "\n"
+#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
+#~ "(MBR)\n"
+#~ "of your main disk (unless you are using another boot manager), to allow "
+#~ "you\n"
+#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
+#~ "on\n"
+#~ "your system). If at some point you need to reinstall Windows, the "
+#~ "Microsoft\n"
+#~ "install process will rewrite the boot sector and remove your ability to\n"
+#~ "start GNU/Linux!\n"
+#~ "\n"
+#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
+#~ "disk,\n"
+#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
+#~ "a\n"
+#~ "fair number of system tools for restoring a system that has crashed due "
+#~ "to\n"
+#~ "a power failure, an unfortunate typing error, a forgotten root password, "
+#~ "or\n"
+#~ "any other reason.\n"
+#~ "\n"
+#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
+#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
+#~ "format the floppy and will rewrite the whole disk."
+#~ msgstr ""
+#~ "Mandrake Linux CDROM има уграђен спасилачки мод. Можете му приступити\n"
+#~ "подизаем система преко CDROM-а, притисните >>F1<< тастер при стартању и "
+#~ "укуцајте >>rescue<< у\n"
+#~ "промпту. Уколико не можете да бутујете са CDROM-а, требали\n"
+#~ "би да се вратите на ове кораке у најмање две ситуације:\n"
+#~ "\n"
+#~ " * када инсталирате стартер, DrakX ће преписати садржај boot сектора "
+#~ "(MBR)\n"
+#~ "вашег основног диска (осим уколико не користите неки други стартер) да би "
+#~ "могли \n"
+#~ "да покренете или Windows или GNU/Linux (претпостављајући да имате "
+#~ "инстлиран Windows на\n"
+#~ "вашем систему). Уколико треба да реинсталирате Windows, Microsoft-ов "
+#~ "инсталациони\n"
+#~ "процес ће опет преписати boot сектор, па она нећете бити у могућности\n"
+#~ "да покрене GNU/Linux!\n"
+#~ "\n"
+#~ " * уколико се проблем јавља и не можете да покренете GNU/Linux са хард "
+#~ "диска,\n"
+#~ "овај флопи диск ће онда бити једини начин за стартање GNU/Linux-а. Он\n"
+#~ "садржи добар број системских алата за обнову система, који се\n"
+#~ "срушио услед нестанка ел.енергије, несретне грешке у куцању, погрешне\n"
+#~ "лозинке, или било ког другог разлога.\n"
+#~ "\n"
+#~ "Уколико кажете \"Да\", тражиће се од вас да убаците празну дискету\n"
+#~ "у уређај. Флопи дискета мора бити празна или да садржи податке који вам "
+#~ "нису неопходни\n"
+#~ "Нема потребе да је форматирате јер ће DrakX сам поново уписати\n"
+#~ "целу дискету."
+
+#~ msgid ""
#~ "The following printers are configured. Double-click on a printer to "
#~ "change its settings; to make it the default printer; to view information "
#~ "about it; or to make a printer on a remote CUPS server available for Star "