update POT file

1 files changed, 393 insertions, 369 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index be955126d..33d4be464 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2010-03-28 14:46+0200\n"
+"POT-Creation-Date: 2010-05-01 16:46+0200\n"
 "PO-Revision-Date: 2008-10-18 00:45+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -29,10 +29,10 @@ msgstr ""
 "X-Poedit-Language: Chinese\n"
 "X-Poedit-Country: TAIWAN\n"
 
-#: any.pm:252 any.pm:953 diskdrake/interactive.pm:597
-#: diskdrake/interactive.pm:802 diskdrake/interactive.pm:846
-#: diskdrake/interactive.pm:950 diskdrake/interactive.pm:1204
-#: diskdrake/interactive.pm:1256 do_pkgs.pm:241 do_pkgs.pm:287
+#: any.pm:252 any.pm:947 diskdrake/interactive.pm:647
+#: diskdrake/interactive.pm:864 diskdrake/interactive.pm:924
+#: diskdrake/interactive.pm:1026 diskdrake/interactive.pm:1256
+#: diskdrake/interactive.pm:1308 do_pkgs.pm:241 do_pkgs.pm:287
 #: harddrake/sound.pm:303 interactive.pm:587 pkgs.pm:281
 #, c-format
 msgid "Please wait"
@@ -136,7 +136,7 @@ msgstr "略過"
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:412 any.pm:452 any.pm:453
+#: any.pm:412 any.pm:445 any.pm:446
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入程式主要選項"
@@ -146,12 +146,12 @@ msgstr "開機載入程式主要選項"
 msgid "Bootloader"
 msgstr "開機載入器"
 
-#: any.pm:417 any.pm:456
+#: any.pm:417 any.pm:449
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入程式"
 
-#: any.pm:420 any.pm:459
+#: any.pm:420 any.pm:452
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
@@ -191,7 +191,7 @@ msgstr "啟用本地 APIC"
 msgid "Security"
 msgstr "安全性"
 
-#: any.pm:431 any.pm:891 any.pm:907 authentication.pm:250
+#: any.pm:431 any.pm:885 any.pm:901 authentication.pm:250
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
@@ -202,7 +202,7 @@ msgstr "密碼"
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:434 authentication.pm:261 diskdrake/interactive.pm:1428
+#: any.pm:434 authentication.pm:261 diskdrake/interactive.pm:1483
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
@@ -212,163 +212,152 @@ msgstr "請再試一次"
 msgid "You can not use a password with %s"
 msgstr "您不能使用 %s 作為密碼"
 
-#: any.pm:440 any.pm:893 any.pm:909 authentication.pm:251
+#: any.pm:440 any.pm:887 any.pm:903 authentication.pm:251
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
 
 #: any.pm:441
 #, c-format
-msgid "Restrict command line options"
-msgstr "限制命令列選項"
-
-#: any.pm:442
-#, c-format
-msgid "restrict"
-msgstr "限制"
-
-#: any.pm:445
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
-
-#: any.pm:448
-#, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次開機時清理 /tmp"
 
-#: any.pm:458
+#: any.pm:451
 #, c-format
 msgid "Init Message"
 msgstr "啟動訊息"
 
-#: any.pm:460
+#: any.pm:453
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Open Firmware 延遲"
 
-#: any.pm:461
+#: any.pm:454
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心啟動時間逾時"
 
-#: any.pm:462
+#: any.pm:455
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允許光碟開機？"
 
-#: any.pm:463
+#: any.pm:456
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "允許 Open Firmware 開機？"
 
-#: any.pm:464
+#: any.pm:457
 #, c-format
 msgid "Default OS?"
 msgstr "預設的作業系統？"
 
-#: any.pm:537
+#: any.pm:530
 #, c-format
 msgid "Image"
 msgstr "核心影像"
 
-#: any.pm:538 any.pm:551
+#: any.pm:531 any.pm:545
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:539 any.pm:564
+#: any.pm:532 any.pm:558
 #, c-format
 msgid "Append"
 msgstr "附加參數"
 
-#: any.pm:541
+#: any.pm:534
 #, c-format
 msgid "Xen append"
 msgstr "Xen 附加參數"
 
-#: any.pm:544
+#: any.pm:536
+#, c-format
+msgid "Requires password to boot"
+msgstr ""
+
+#: any.pm:538
 #, c-format
 msgid "Video mode"
 msgstr "顯示模式"
 
-#: any.pm:546
+#: any.pm:540
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:547
+#: any.pm:541
 #, c-format
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:556 any.pm:561 any.pm:563 diskdrake/interactive.pm:407
+#: any.pm:550 any.pm:555 any.pm:557 diskdrake/interactive.pm:407
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:558 any.pm:566 harddrake/v4l.pm:438
+#: any.pm:552 any.pm:560 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "預設"
 
-#: any.pm:565
+#: any.pm:559
 #, c-format
 msgid "NoVideo"
 msgstr "沒有 Video 參數"
 
-#: any.pm:576
+#: any.pm:570
 #, c-format
 msgid "Empty label not allowed"
 msgstr "不允許空白標籤"
 
-#: any.pm:577
+#: any.pm:571
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您需要指定一個核心影像"
 
-#: any.pm:577
+#: any.pm:571
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您需要指定一個 root 分割區"
 
-#: any.pm:578
+#: any.pm:572
 #, c-format
 msgid "This label is already used"
 msgstr "這個標籤已經被用過了"
 
-#: any.pm:596
+#: any.pm:590
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "您要新增哪一類的項目？"
 
-#: any.pm:597
+#: any.pm:591
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:597
+#: any.pm:591
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其他作業系統 (SunOS...)"
 
-#: any.pm:598
+#: any.pm:592
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其他作業系統 (MacOS...)"
 
-#: any.pm:598
+#: any.pm:592
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其他作業系統 (Windows...)"
 
-#: any.pm:645
+#: any.pm:639
 #, c-format
 msgid "Bootloader Configuration"
 msgstr "開機載入程式組態設定"
 
-#: any.pm:646
+#: any.pm:640
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -377,194 +366,194 @@ msgstr ""
 "目前有這些選項在您的開機選單中。\n"
 "您可以建立更多的選項或修改既有的選項。"
 
-#: any.pm:851
+#: any.pm:845
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:852
+#: any.pm:846
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 RPM 套件工具程式"
 
-#: any.pm:853
+#: any.pm:847
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:854
+#: any.pm:848
 #, c-format
 msgid "access to administrative files"
 msgstr "存取系統管理者權限的檔案"
 
-#: any.pm:855
+#: any.pm:849
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:856
+#: any.pm:850
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:862
+#: any.pm:856
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:868
+#: any.pm:862
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:869
+#: any.pm:863
 #, fuzzy, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
 "cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
-#: any.pm:870
+#: any.pm:864
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:871
+#: any.pm:865
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:877 any.pm:911
+#: any.pm:871 any.pm:905
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:877 any.pm:912
+#: any.pm:871 any.pm:906
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
 
-#: any.pm:878
+#: any.pm:872
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必須是數字"
 
-#: any.pm:879
+#: any.pm:873
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:883
+#: any.pm:877
 #, c-format
 msgid "User management"
 msgstr "使用者管理"
 
-#: any.pm:889
+#: any.pm:883
 #, c-format
 msgid "Enable guest account"
 msgstr ""
 
-#: any.pm:890 authentication.pm:237
+#: any.pm:884 authentication.pm:237
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "設定管理者 (root) 密碼"
 
-#: any.pm:895
+#: any.pm:889
 #, c-format
 msgid "Enter a user"
 msgstr "輸入一位使用者"
 
-#: any.pm:897
+#: any.pm:891
 #, c-format
 msgid "Icon"
 msgstr "圖示"
 
-#: any.pm:900
+#: any.pm:894
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:905
+#: any.pm:899
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:910
+#: any.pm:904
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:953
+#: any.pm:947
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "請稍後，新增媒體中..."
 
-#: any.pm:983 security/l10n.pm:14
+#: any.pm:977 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:984
+#: any.pm:978
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
 
-#: any.pm:985
+#: any.pm:979
 #, c-format
 msgid "Use this feature"
 msgstr "使用此功能"
 
-#: any.pm:986
+#: any.pm:980
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者："
 
-#: any.pm:987
+#: any.pm:981
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:998 any.pm:1018 any.pm:1091
+#: any.pm:992 any.pm:1012 any.pm:1085
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: any.pm:1025 any.pm:1379 interactive/gtk.pm:819
+#: any.pm:1019 any.pm:1373 interactive/gtk.pm:819
 #, c-format
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:1077
+#: any.pm:1071
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: any.pm:1079 diskdrake/dav.pm:26
+#: any.pm:1073 diskdrake/dav.pm:26
 #, c-format
 msgid "Quit"
 msgstr "離開"
 
-#: any.pm:1086
+#: any.pm:1080
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "您接受這份授權嗎？"
 
-#: any.pm:1087
+#: any.pm:1081
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:1087
+#: any.pm:1081
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: any.pm:1113 any.pm:1175
+#: any.pm:1107 any.pm:1169
 #, c-format
 msgid "Please choose a language to use"
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:1141
+#: any.pm:1135
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -574,77 +563,77 @@ msgstr ""
 "Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
 "它們將可供您完成安裝並重新啟動系統之後使用。"
 
-#: any.pm:1144
+#: any.pm:1138
 #, c-format
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:1153 any.pm:1184
+#: any.pm:1147 any.pm:1178
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "舊式相容 (非 UTF-8) 編碼"
 
-#: any.pm:1154
+#: any.pm:1148
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:1176
+#: any.pm:1170
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:1230
+#: any.pm:1224
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:1231
+#: any.pm:1225
 #, c-format
 msgid "Please choose your country"
 msgstr "請選擇您的國家。"
 
-#: any.pm:1233
+#: any.pm:1227
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:1234
+#: any.pm:1228
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:1234 interactive.pm:488 interactive/gtk.pm:445
+#: any.pm:1228 interactive.pm:488 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:1240
+#: any.pm:1234
 #, c-format
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:1243
+#: any.pm:1237
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:1324
+#: any.pm:1318
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:1324
+#: any.pm:1318
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:1324
+#: any.pm:1318
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: any.pm:1328
+#: any.pm:1322
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -659,32 +648,32 @@ msgstr ""
 "\n"
 "\"自訂\" 允許每一個使用者自行設定。\n"
 
-#: any.pm:1340
+#: any.pm:1334
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
-#: any.pm:1343
+#: any.pm:1337
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
-#: any.pm:1351
+#: any.pm:1345
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
-#: any.pm:1379
+#: any.pm:1373
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1381
+#: any.pm:1375
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -693,54 +682,54 @@ msgstr ""
 "每個使用者的分享都是使用 \"fileshare\" 群組。\n"
 "您可以執行 userdrake 在該群組內加入使用者。"
 
-#: any.pm:1487
+#: any.pm:1481
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
 "logout now."
 msgstr "您必須登出之後重新登入才能讓變動生效。馬上登出請按下確定。"
 
-#: any.pm:1491
+#: any.pm:1485
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您必須登出之後重新登入才能讓變動生效"
 
-#: any.pm:1526
+#: any.pm:1520
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: any.pm:1526
+#: any.pm:1520
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何？"
 
-#: any.pm:1549 any.pm:1551
+#: any.pm:1543 any.pm:1545
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、時間與時區設定"
 
-#: any.pm:1552
+#: any.pm:1546
 #, c-format
 msgid "What is the best time?"
 msgstr "最佳的時間是哪一個？"
 
-#: any.pm:1556
+#: any.pm:1550
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬體時鐘設定為 UTC 時間)"
 
-#: any.pm:1557
+#: any.pm:1551
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬體時鐘設定為本地時間)"
 
-#: any.pm:1559
+#: any.pm:1553
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 伺服器"
 
-#: any.pm:1560
+#: any.pm:1554
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自動時間同步 (使用 NTP 服務)"
@@ -1108,26 +1097,26 @@ msgstr "SILO"
 msgid "not enough room in /boot"
 msgstr "/boot 沒有足夠的空間"
 
-#: bootloader.pm:1923
+#: bootloader.pm:1932
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "您無法把開機載入程式安裝在 %s 分割區上\n"
 
-#: bootloader.pm:2044
+#: bootloader.pm:2053
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
-#: bootloader.pm:2057
+#: bootloader.pm:2066
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
 
-#: bootloader.pm:2058
+#: bootloader.pm:2067
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安裝開機載入程式"
@@ -1210,15 +1199,15 @@ msgid "Server"
 msgstr "伺服器"
 
 #: diskdrake/dav.pm:66 diskdrake/interactive.pm:404
-#: diskdrake/interactive.pm:674 diskdrake/interactive.pm:692
-#: diskdrake/interactive.pm:696 diskdrake/removable.pm:23
+#: diskdrake/interactive.pm:724 diskdrake/interactive.pm:742
+#: diskdrake/interactive.pm:746 diskdrake/removable.pm:23
 #: diskdrake/smbnfs_gtk.pm:79
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
 
 #: diskdrake/dav.pm:67 diskdrake/interactive.pm:406
-#: diskdrake/interactive.pm:1098 diskdrake/removable.pm:24
+#: diskdrake/interactive.pm:1153 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1235,18 +1224,18 @@ msgstr "移除"
 msgid "Done"
 msgstr "完成"
 
-#: diskdrake/dav.pm:78 diskdrake/hd_gtk.pm:128 diskdrake/hd_gtk.pm:294
+#: diskdrake/dav.pm:78 diskdrake/hd_gtk.pm:128 diskdrake/hd_gtk.pm:292
 #: diskdrake/interactive.pm:247 diskdrake/interactive.pm:260
 #: diskdrake/interactive.pm:453 diskdrake/interactive.pm:523
-#: diskdrake/interactive.pm:528 diskdrake/interactive.pm:664
-#: diskdrake/interactive.pm:917 diskdrake/interactive.pm:968
-#: diskdrake/interactive.pm:1144 diskdrake/interactive.pm:1157
-#: diskdrake/interactive.pm:1160 diskdrake/interactive.pm:1428
-#: diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23 do_pkgs.pm:28 do_pkgs.pm:44
-#: do_pkgs.pm:60 do_pkgs.pm:65 do_pkgs.pm:82 fsedit.pm:246
-#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
-#: scanner.pm:95 scanner.pm:106 scanner.pm:113 scanner.pm:120 wizards.pm:95
-#: wizards.pm:99 wizards.pm:121
+#: diskdrake/interactive.pm:541 diskdrake/interactive.pm:546
+#: diskdrake/interactive.pm:714 diskdrake/interactive.pm:993
+#: diskdrake/interactive.pm:1044 diskdrake/interactive.pm:1199
+#: diskdrake/interactive.pm:1212 diskdrake/interactive.pm:1215
+#: diskdrake/interactive.pm:1483 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23
+#: do_pkgs.pm:28 do_pkgs.pm:44 do_pkgs.pm:60 do_pkgs.pm:65 do_pkgs.pm:82
+#: fsedit.pm:246 interactive/http.pm:117 interactive/http.pm:118
+#: modules/interactive.pm:19 scanner.pm:95 scanner.pm:106 scanner.pm:113
+#: scanner.pm:120 wizards.pm:95 wizards.pm:99 wizards.pm:121
 #, c-format
 msgid "Error"
 msgstr "錯誤"
@@ -1261,12 +1250,12 @@ msgstr "請輸入 WevDAV 主機 URL"
 msgid "The URL must begin with http:// or https://"
 msgstr "URL 格式必須為 http:// 或是 https://"
 
-#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:412 diskdrake/interactive.pm:306
-#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:553
-#: diskdrake/interactive.pm:755 diskdrake/interactive.pm:813
-#: diskdrake/interactive.pm:948 diskdrake/interactive.pm:990
-#: diskdrake/interactive.pm:991 diskdrake/interactive.pm:1241
-#: diskdrake/interactive.pm:1279 diskdrake/interactive.pm:1427 do_pkgs.pm:19
+#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:417 diskdrake/interactive.pm:306
+#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:594
+#: diskdrake/interactive.pm:817 diskdrake/interactive.pm:875
+#: diskdrake/interactive.pm:1024 diskdrake/interactive.pm:1066
+#: diskdrake/interactive.pm:1067 diskdrake/interactive.pm:1293
+#: diskdrake/interactive.pm:1331 diskdrake/interactive.pm:1482 do_pkgs.pm:19
 #: do_pkgs.pm:39 do_pkgs.pm:57 do_pkgs.pm:77 harddrake/sound.pm:442
 #, c-format
 msgid "Warning"
@@ -1282,23 +1271,23 @@ msgstr "您要按這個按鈕嗎？"
 msgid "Server: "
 msgstr "伺服器："
 
-#: diskdrake/dav.pm:125 diskdrake/interactive.pm:496
-#: diskdrake/interactive.pm:1303 diskdrake/interactive.pm:1388
+#: diskdrake/dav.pm:125 diskdrake/interactive.pm:498
+#: diskdrake/interactive.pm:1355 diskdrake/interactive.pm:1443
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1395
+#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1450
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
 
 #: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:301
 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106
-#: fs/partitioning_wizard.pm:53 fs/partitioning_wizard.pm:235
-#: fs/partitioning_wizard.pm:243 fs/partitioning_wizard.pm:282
-#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:495
-#: fs/partitioning_wizard.pm:571 fs/partitioning_wizard.pm:574
+#: fs/partitioning_wizard.pm:53 fs/partitioning_wizard.pm:236
+#: fs/partitioning_wizard.pm:244 fs/partitioning_wizard.pm:283
+#: fs/partitioning_wizard.pm:432 fs/partitioning_wizard.pm:496
+#: fs/partitioning_wizard.pm:572 fs/partitioning_wizard.pm:575
 #, c-format
 msgid "Partitioning"
 msgstr "分割磁區"
@@ -1308,8 +1297,8 @@ msgstr "分割磁區"
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr "點選一個分割區，選擇檔案系統類型然後選擇一個動作"
 
-#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1119
-#: diskdrake/interactive.pm:1129 diskdrake/interactive.pm:1182
+#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1174
+#: diskdrake/interactive.pm:1184 diskdrake/interactive.pm:1237
 #, c-format
 msgid "Read carefully"
 msgstr "仔細閱讀！"
@@ -1329,7 +1318,7 @@ msgstr "離開"
 msgid "Continue"
 msgstr "繼續"
 
-#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:547 interactive.pm:653
+#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:548 interactive.pm:653
 #: interactive/gtk.pm:811 interactive/gtk.pm:829 interactive/gtk.pm:850
 #: ugtk2.pm:936
 #, c-format
@@ -1357,79 +1346,79 @@ msgstr "請點選一個分割區"
 msgid "Details"
 msgstr "詳細資訊"
 
-#: diskdrake/hd_gtk.pm:294
+#: diskdrake/hd_gtk.pm:292
 #, c-format
 msgid "No hard drives found"
 msgstr "找不到硬碟裝置"
 
-#: diskdrake/hd_gtk.pm:321
+#: diskdrake/hd_gtk.pm:323
 #, c-format
 msgid "Unknown"
 msgstr "未知的"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:388
 #, fuzzy, c-format
 msgid "Ext4"
 msgstr "離開"
 
-#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
+#: diskdrake/hd_gtk.pm:388 fs/partitioning_wizard.pm:402
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
+#: diskdrake/hd_gtk.pm:388 fs/partitioning_wizard.pm:402
 #, c-format
 msgid "Swap"
 msgstr "Swap"
 
-#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
+#: diskdrake/hd_gtk.pm:388 fs/partitioning_wizard.pm:402
 #, c-format
 msgid "SunOS"
 msgstr "SunOS"
 
-#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
+#: diskdrake/hd_gtk.pm:388 fs/partitioning_wizard.pm:402
 #, c-format
 msgid "HFS"
 msgstr "HFS"
 
-#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
+#: diskdrake/hd_gtk.pm:388 fs/partitioning_wizard.pm:402
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:384 fs/partitioning_wizard.pm:402 services.pm:184
+#: diskdrake/hd_gtk.pm:389 fs/partitioning_wizard.pm:403 services.pm:184
 #, c-format
 msgid "Other"
 msgstr "其他"
 
-#: diskdrake/hd_gtk.pm:384 diskdrake/interactive.pm:1318
-#: fs/partitioning_wizard.pm:402
+#: diskdrake/hd_gtk.pm:389 diskdrake/interactive.pm:1370
+#: fs/partitioning_wizard.pm:403
 #, c-format
 msgid "Empty"
 msgstr "空白"
 
-#: diskdrake/hd_gtk.pm:391
+#: diskdrake/hd_gtk.pm:396
 #, c-format
 msgid "Filesystem types:"
 msgstr "檔案系統格式："
 
-#: diskdrake/hd_gtk.pm:412
+#: diskdrake/hd_gtk.pm:417
 #, c-format
 msgid "This partition is already empty"
 msgstr "這個分割區已經是空白的了"
 
-#: diskdrake/hd_gtk.pm:421
+#: diskdrake/hd_gtk.pm:426
 #, c-format
 msgid "Use ``Unmount'' first"
 msgstr "要先 ``Unmount''"
 
-#: diskdrake/hd_gtk.pm:421
+#: diskdrake/hd_gtk.pm:426
 #, c-format
 msgid "Use ``%s'' instead (in expert mode)"
 msgstr "用 ``%s'' 代替 (在專家模式)"
 
-#: diskdrake/hd_gtk.pm:421 diskdrake/interactive.pm:405
-#: diskdrake/interactive.pm:591 diskdrake/removable.pm:25
+#: diskdrake/hd_gtk.pm:426 diskdrake/interactive.pm:405
+#: diskdrake/interactive.pm:641 diskdrake/removable.pm:25
 #: diskdrake/removable.pm:48
 #, c-format
 msgid "Type"
@@ -1452,7 +1441,7 @@ msgid "More"
 msgstr "更多"
 
 #: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
-#: diskdrake/interactive.pm:1226
+#: diskdrake/interactive.pm:568 diskdrake/interactive.pm:1278
 #, c-format
 msgid "Confirmation"
 msgstr "確認"
@@ -1477,7 +1466,7 @@ msgstr "放棄寫入硬碟分割表就離開？"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"
 
-#: diskdrake/interactive.pm:301 fs/partitioning_wizard.pm:282
+#: diskdrake/interactive.pm:301 fs/partitioning_wizard.pm:283
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "您必須重新開機以使更動過的硬碟分割表生效"
@@ -1550,7 +1539,7 @@ msgstr "詳細資訊"
 msgid "View"
 msgstr ""
 
-#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:768
+#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:830
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
@@ -1560,12 +1549,12 @@ msgstr "重新變更大小"
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:878
+#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:956
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:899
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:975
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
@@ -1615,37 +1604,62 @@ msgstr "建立"
 msgid "Failed to mount partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:485 diskdrake/interactive.pm:487
+#: diskdrake/interactive.pm:487 diskdrake/interactive.pm:489
 #, c-format
 msgid "Create a new partition"
 msgstr "建立新的分割區"
 
-#: diskdrake/interactive.pm:489
+#: diskdrake/interactive.pm:491
 #, c-format
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:492 diskdrake/interactive.pm:983
+#: diskdrake/interactive.pm:494 diskdrake/interactive.pm:1059
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:494 diskdrake/interactive.pm:984
+#: diskdrake/interactive.pm:496 diskdrake/interactive.pm:1060
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
 
-#: diskdrake/interactive.pm:500
+#: diskdrake/interactive.pm:502
 #, c-format
 msgid "Preference: "
 msgstr "偏好設定："
 
-#: diskdrake/interactive.pm:503
+#: diskdrake/interactive.pm:505
 #, c-format
 msgid "Logical volume name "
 msgstr "邏輯磁區名稱"
 
-#: diskdrake/interactive.pm:523
+#: diskdrake/interactive.pm:507
+#, fuzzy, c-format
+msgid "Encrypt partition"
+msgstr "加密演算法"
+
+#: diskdrake/interactive.pm:508
+#, fuzzy, c-format
+msgid "Encryption key "
+msgstr "加密金鑰"
+
+#: diskdrake/interactive.pm:509 diskdrake/interactive.pm:1487
+#, c-format
+msgid "Encryption key (again)"
+msgstr "再次輸入加密金鑰"
+
+#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:1483
+#, c-format
+msgid "The encryption keys do not match"
+msgstr "輸入的加密金鑰不符合"
+
+#: diskdrake/interactive.pm:521
+#, fuzzy, c-format
+msgid "Missing encryption key"
+msgstr "檔案系統加密金鑰"
+
+#: diskdrake/interactive.pm:541
 #, c-format
 msgid ""
 "You can not create a new partition\n"
@@ -1656,68 +1670,74 @@ msgstr ""
 "(因為您已經達到主分割區的最大值)。\n"
 "您需要先移除一個主分割區然後建立一個延伸分割區。"
 
-#: diskdrake/interactive.pm:553
+#: diskdrake/interactive.pm:568 diskdrake/interactive.pm:1278
+#: fs/partitioning.pm:48
+#, c-format
+msgid "Check bad blocks?"
+msgstr "檢查壞掉的區塊？"
+
+#: diskdrake/interactive.pm:594
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:575
+#: diskdrake/interactive.pm:622
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:588
+#: diskdrake/interactive.pm:638
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:590 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:640 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:597
+#: diskdrake/interactive.pm:647
 #, c-format
 msgid "Switching from %s to %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: diskdrake/interactive.pm:632
+#: diskdrake/interactive.pm:682
 #, c-format
 msgid "Set volume label"
 msgstr "設定磁區標籤 "
 
-#: diskdrake/interactive.pm:634
+#: diskdrake/interactive.pm:684
 #, c-format
 msgid "Beware, this will be written to disk as soon as you validate!"
 msgstr "注意，在您確定變更之後將會被寫入磁碟！"
 
-#: diskdrake/interactive.pm:635
+#: diskdrake/interactive.pm:685
 #, fuzzy, c-format
 msgid "Beware, this will be written to disk only after formatting!"
 msgstr "注意，在您確定變更之後將會被寫入磁碟！"
 
-#: diskdrake/interactive.pm:637
+#: diskdrake/interactive.pm:687
 #, c-format
 msgid "Which volume label?"
 msgstr "哪一個磁區標籤？"
 
-#: diskdrake/interactive.pm:638
+#: diskdrake/interactive.pm:688
 #, c-format
 msgid "Label:"
 msgstr "標籤："
 
-#: diskdrake/interactive.pm:659
+#: diskdrake/interactive.pm:709
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:660
+#: diskdrake/interactive.pm:710
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:665
+#: diskdrake/interactive.pm:715
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -1726,58 +1746,58 @@ msgstr ""
 "因為這個分割區被用作 loop back 使用，所以無法解除\n"
 "這個掛載點。請先取消 loopback 的設定"
 
-#: diskdrake/interactive.pm:695
+#: diskdrake/interactive.pm:745
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:719 diskdrake/interactive.pm:802
-#: fs/partitioning_wizard.pm:128 fs/partitioning_wizard.pm:204
+#: diskdrake/interactive.pm:775 diskdrake/interactive.pm:864
+#: fs/partitioning_wizard.pm:129 fs/partitioning_wizard.pm:205
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:719
+#: diskdrake/interactive.pm:775
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:755
+#: diskdrake/interactive.pm:817
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:822
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "所有在這個分割區上的資料都應該先經過備份"
 
-#: diskdrake/interactive.pm:762
+#: diskdrake/interactive.pm:824
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:769
+#: diskdrake/interactive.pm:831
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:770
+#: diskdrake/interactive.pm:832
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:771
+#: diskdrake/interactive.pm:833
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小容量：%s MB"
 
-#: diskdrake/interactive.pm:772
+#: diskdrake/interactive.pm:834
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大容量：%s MB"
 
-#: diskdrake/interactive.pm:813 fs/partitioning_wizard.pm:212
+#: diskdrake/interactive.pm:875 fs/partitioning_wizard.pm:213
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s),\n"
@@ -1786,57 +1806,57 @@ msgstr ""
 "為確保重新調整分割區大小後的資料正確性，\n"
 " 您下次從 Microsoft Windows® 開機時會執行檔案系統檢查。 "
 
-#: diskdrake/interactive.pm:861 diskdrake/interactive.pm:1423
+#: diskdrake/interactive.pm:939 diskdrake/interactive.pm:1478
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:940
 #, c-format
 msgid "Enter your filesystem encryption key"
 msgstr "請輸入您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:863 diskdrake/interactive.pm:1431
+#: diskdrake/interactive.pm:941 diskdrake/interactive.pm:1486
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:870
+#: diskdrake/interactive.pm:948
 #, c-format
 msgid "Invalid key"
 msgstr ""
 
-#: diskdrake/interactive.pm:878
+#: diskdrake/interactive.pm:956
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:880 diskdrake/interactive.pm:901
+#: diskdrake/interactive.pm:958 diskdrake/interactive.pm:977
 #, c-format
 msgid "new"
 msgstr "新增"
 
-#: diskdrake/interactive.pm:899
+#: diskdrake/interactive.pm:975
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:911 diskdrake/interactive.pm:920
+#: diskdrake/interactive.pm:987 diskdrake/interactive.pm:996
 #, fuzzy, c-format
 msgid "LVM name"
 msgstr "LVM 名稱？"
 
-#: diskdrake/interactive.pm:912
+#: diskdrake/interactive.pm:988
 #, c-format
 msgid "Enter a name for the new LVM volume group"
 msgstr ""
 
-#: diskdrake/interactive.pm:917
+#: diskdrake/interactive.pm:993
 #, fuzzy, c-format
 msgid "\"%s\" already exists"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:948
+#: diskdrake/interactive.pm:1024
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1845,117 +1865,112 @@ msgstr ""
 "實體磁區 %s 仍然在使用中。\n"
 "您要把位於這個磁區的實體延伸移到另一個磁區嗎？"
 
-#: diskdrake/interactive.pm:950
+#: diskdrake/interactive.pm:1026
 #, c-format
 msgid "Moving physical extents"
 msgstr "移動實體延伸"
 
-#: diskdrake/interactive.pm:968
+#: diskdrake/interactive.pm:1044
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "這個分割區不能用來作為 loopback"
 
-#: diskdrake/interactive.pm:981
+#: diskdrake/interactive.pm:1057
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:982
+#: diskdrake/interactive.pm:1058
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:987
+#: diskdrake/interactive.pm:1063
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:990
+#: diskdrake/interactive.pm:1066
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:991
+#: diskdrake/interactive.pm:1067
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:1023 diskdrake/interactive.pm:1026
+#: diskdrake/interactive.pm:1099 diskdrake/interactive.pm:1102
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:1033
+#: diskdrake/interactive.pm:1109
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1100
+#: diskdrake/interactive.pm:1155
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1101
+#: diskdrake/interactive.pm:1156
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1102
+#: diskdrake/interactive.pm:1157
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 KiB 計量"
 
-#: diskdrake/interactive.pm:1120
+#: diskdrake/interactive.pm:1175
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1135
+#: diskdrake/interactive.pm:1190
 #, c-format
 msgid "Partitioning Type"
 msgstr "磁區格式"
 
-#: diskdrake/interactive.pm:1135
+#: diskdrake/interactive.pm:1190
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1173
+#: diskdrake/interactive.pm:1228
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: diskdrake/interactive.pm:1182
+#: diskdrake/interactive.pm:1237
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1204 fs/format.pm:99 fs/format.pm:106
+#: diskdrake/interactive.pm:1256 fs/format.pm:102 fs/format.pm:109
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
 
-#: diskdrake/interactive.pm:1217
+#: diskdrake/interactive.pm:1269
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1226 fs/partitioning.pm:48
-#, c-format
-msgid "Check bad blocks?"
-msgstr "檢查壞掉的區塊？"
-
-#: diskdrake/interactive.pm:1240
+#: diskdrake/interactive.pm:1292
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1240
+#: diskdrake/interactive.pm:1292
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1241
+#: diskdrake/interactive.pm:1293
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1971,128 +1986,128 @@ msgstr ""
 "您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起"
 "來，而目錄中顯示出來的會是掛載上的磁區內容)"
 
-#: diskdrake/interactive.pm:1256
+#: diskdrake/interactive.pm:1308
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1260
+#: diskdrake/interactive.pm:1312
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1264
+#: diskdrake/interactive.pm:1316
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1278
+#: diskdrake/interactive.pm:1330
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分割區 %s 現在被命名為 %s 了"
 
-#: diskdrake/interactive.pm:1279
+#: diskdrake/interactive.pm:1331
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1304 diskdrake/interactive.pm:1372
+#: diskdrake/interactive.pm:1356 diskdrake/interactive.pm:1427
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1305
+#: diskdrake/interactive.pm:1357
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤："
 
-#: diskdrake/interactive.pm:1306
+#: diskdrake/interactive.pm:1358
 #, c-format
 msgid "UUID: "
 msgstr "UUID:"
 
-#: diskdrake/interactive.pm:1307
+#: diskdrake/interactive.pm:1359
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1311 diskdrake/interactive.pm:1320
-#: diskdrake/interactive.pm:1391
+#: diskdrake/interactive.pm:1363 diskdrake/interactive.pm:1372
+#: diskdrake/interactive.pm:1446
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1315 diskdrake/interactive.pm:1376
+#: diskdrake/interactive.pm:1367 diskdrake/interactive.pm:1431
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1322
+#: diskdrake/interactive.pm:1374
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1323
+#: diskdrake/interactive.pm:1375
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1325
+#: diskdrake/interactive.pm:1377
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1327
+#: diskdrake/interactive.pm:1379
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1328
+#: diskdrake/interactive.pm:1380
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "邏輯延伸的數目：%d\n"
 
-#: diskdrake/interactive.pm:1329
+#: diskdrake/interactive.pm:1381
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1330
+#: diskdrake/interactive.pm:1382
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1331
+#: diskdrake/interactive.pm:1383
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1332
+#: diskdrake/interactive.pm:1384
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1334
+#: diskdrake/interactive.pm:1386
 #, c-format
 msgid "Encrypted"
 msgstr "已加密"
 
-#: diskdrake/interactive.pm:1334
+#: diskdrake/interactive.pm:1388
 #, c-format
 msgid " (mapped on %s)"
 msgstr ""
 
-#: diskdrake/interactive.pm:1335
+#: diskdrake/interactive.pm:1389
 #, c-format
 msgid " (to map on %s)"
 msgstr ""
 
-#: diskdrake/interactive.pm:1336
+#: diskdrake/interactive.pm:1390
 #, c-format
 msgid " (inactive)"
 msgstr "(未啟動)"
 
-#: diskdrake/interactive.pm:1342
+#: diskdrake/interactive.pm:1397
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2101,7 +2116,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1343
+#: diskdrake/interactive.pm:1398
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2110,27 +2125,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1345
+#: diskdrake/interactive.pm:1400
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1346
+#: diskdrake/interactive.pm:1401
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1347
+#: diskdrake/interactive.pm:1402
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1349
+#: diskdrake/interactive.pm:1404
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1352
+#: diskdrake/interactive.pm:1407
 #, c-format
 msgid ""
 "\n"
@@ -2143,7 +2158,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1355
+#: diskdrake/interactive.pm:1410
 #, c-format
 msgid ""
 "\n"
@@ -2155,67 +2170,57 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1364
+#: diskdrake/interactive.pm:1419
 #, c-format
 msgid "Free space on %s (%s)"
 msgstr "%s 上的可用空間 (%s)"
 
-#: diskdrake/interactive.pm:1373
+#: diskdrake/interactive.pm:1428
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1374
+#: diskdrake/interactive.pm:1429
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1375
+#: diskdrake/interactive.pm:1430
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1377
+#: diskdrake/interactive.pm:1432
 #, c-format
 msgid "Medium type: "
 msgstr "媒體型式："
 
-#: diskdrake/interactive.pm:1378
+#: diskdrake/interactive.pm:1433
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1379
+#: diskdrake/interactive.pm:1434
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1380
+#: diskdrake/interactive.pm:1435
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1424
+#: diskdrake/interactive.pm:1479
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1427
+#: diskdrake/interactive.pm:1482
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1428
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "輸入的加密金鑰不符合"
-
-#: diskdrake/interactive.pm:1432
-#, c-format
-msgid "Encryption key (again)"
-msgstr "再次輸入加密金鑰"
-
-#: diskdrake/interactive.pm:1434
+#: diskdrake/interactive.pm:1489
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密演算法"
@@ -2318,32 +2323,32 @@ msgstr ""
 "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體"
 "以找出問題的原因所在"
 
-#: fs/any.pm:75 fs/partitioning_wizard.pm:61
+#: fs/any.pm:75 fs/partitioning_wizard.pm:62
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
 
-#: fs/format.pm:103
+#: fs/format.pm:106
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "建立並格式化檔案 %s"
 
-#: fs/format.pm:122
+#: fs/format.pm:125
 #, c-format
 msgid "I do not know how to set label on %s with type %s"
 msgstr "我不知道如何在 %s 上設定型態 %s 的標籤"
 
-#: fs/format.pm:131
+#: fs/format.pm:134
 #, fuzzy, c-format
 msgid "setting label on %s failed, is it formatted?"
 msgstr "無法在 %s 上設定標籤"
 
-#: fs/format.pm:172
+#: fs/format.pm:175
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道要如何將 %s 格式化為 %s 格式"
 
-#: fs/format.pm:177 fs/format.pm:179
+#: fs/format.pm:180 fs/format.pm:182
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "以 %s 格式化 %s 失敗"
@@ -2378,36 +2383,31 @@ msgstr "卸下 %s 的掛載時發生錯誤：%s"
 msgid "Enabling swap partition %s"
 msgstr "正在啟用 swap 分割區 %s"
 
-#: fs/mount_options.pm:114
-#, c-format
-msgid "Use an encrypted file system"
-msgstr "使用加密的檔案系統"
-
-#: fs/mount_options.pm:116
+#: fs/mount_options.pm:113
 #, c-format
 msgid "Flush write cache on file close"
 msgstr ""
 
-#: fs/mount_options.pm:118
+#: fs/mount_options.pm:115
 #, c-format
 msgid "Enable group disk quota accounting and optionally enforce limits"
 msgstr "啟用群組磁碟配額計算與選擇性的執行限制"
 
-#: fs/mount_options.pm:120
+#: fs/mount_options.pm:117
 #, c-format
 msgid ""
 "Do not update inode access times on this file system\n"
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
-#: fs/mount_options.pm:123
+#: fs/mount_options.pm:120
 #, c-format
 msgid ""
 "Update inode access times on this filesystem in a more efficient way\n"
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
-#: fs/mount_options.pm:126
+#: fs/mount_options.pm:123
 #, c-format
 msgid ""
 "Can only be mounted explicitly (i.e.,\n"
@@ -2416,12 +2416,12 @@ msgstr ""
 "只能手動掛載 (亦即 mount 時使用 -a 參數將不會\n"
 "自動掛載這個檔案系統)。"
 
-#: fs/mount_options.pm:129
+#: fs/mount_options.pm:126
 #, c-format
 msgid "Do not interpret character or block special devices on the file system."
 msgstr ""
 
-#: fs/mount_options.pm:131
+#: fs/mount_options.pm:128
 #, c-format
 msgid ""
 "Do not allow execution of any binaries on the mounted\n"
@@ -2429,7 +2429,7 @@ msgid ""
 "containing binaries for architectures other than its own."
 msgstr ""
 
-#: fs/mount_options.pm:135
+#: fs/mount_options.pm:132
 #, c-format
 msgid ""
 "Do not allow set-user-identifier or set-group-identifier\n"
@@ -2439,42 +2439,42 @@ msgstr ""
 "不允許 set-user-identifier 或 set-group-identifier 作用。\n"
 "(這樣似乎是安全的，但當您有安裝 suidperl(1) 時則不然。)"
 
-#: fs/mount_options.pm:139
+#: fs/mount_options.pm:136
 #, c-format
 msgid "Mount the file system read-only."
 msgstr "以唯讀方式掛載檔案系統。"
 
-#: fs/mount_options.pm:141
+#: fs/mount_options.pm:138
 #, c-format
 msgid "All I/O to the file system should be done synchronously."
 msgstr "所有對於此檔案系統的存取 (I/O) 動作必須同步。"
 
-#: fs/mount_options.pm:143
+#: fs/mount_options.pm:140
 #, c-format
 msgid "Allow every user to mount and umount the file system."
 msgstr "允許所有的使用者掛載與卸載這個檔案系統。"
 
-#: fs/mount_options.pm:145
+#: fs/mount_options.pm:142
 #, c-format
 msgid "Allow an ordinary user to mount the file system."
 msgstr "允許一般使用者掛載這個檔案系統。"
 
-#: fs/mount_options.pm:147
+#: fs/mount_options.pm:144
 #, c-format
 msgid "Enable user disk quota accounting, and optionally enforce limits"
 msgstr "啟用使用者磁碟配額計算與選擇性的執行限制"
 
-#: fs/mount_options.pm:149
+#: fs/mount_options.pm:146
 #, c-format
 msgid "Support \"user.\" extended attributes"
 msgstr "支援 \"user.\" 延伸屬性"
 
-#: fs/mount_options.pm:151
+#: fs/mount_options.pm:148
 #, c-format
 msgid "Give write access to ordinary users"
 msgstr "授予寫入權限給一般使用者"
 
-#: fs/mount_options.pm:153
+#: fs/mount_options.pm:150
 #, c-format
 msgid "Give read-only access to ordinary users"
 msgstr "授予唯讀權限給一般使用者"
@@ -2527,7 +2527,7 @@ msgstr ""
 "請建立一個分割區 (或點選一個已經存在的)，\n"
 "接著選動作 \"掛載點\" 且把它設成 \"/\""
 
-#: fs/partitioning_wizard.pm:58
+#: fs/partitioning_wizard.pm:59
 #, c-format
 msgid ""
 "You do not have a swap partition.\n"
@@ -2538,42 +2538,42 @@ msgstr ""
 "\n"
 "不管如何都要繼續？"
 
-#: fs/partitioning_wizard.pm:92
+#: fs/partitioning_wizard.pm:93
 #, c-format
 msgid "Use free space"
 msgstr "使用未用到的空間"
 
-#: fs/partitioning_wizard.pm:94
+#: fs/partitioning_wizard.pm:95
 #, c-format
 msgid "Not enough free space to allocate new partitions"
 msgstr "沒有足夠的空間可以建立新的分割區了"
 
-#: fs/partitioning_wizard.pm:102
+#: fs/partitioning_wizard.pm:103
 #, c-format
 msgid "Use existing partitions"
 msgstr "使用已經存在的分割區"
 
-#: fs/partitioning_wizard.pm:104
+#: fs/partitioning_wizard.pm:105
 #, c-format
 msgid "There is no existing partition to use"
 msgstr "沒有已經存在的分割區可供使用"
 
-#: fs/partitioning_wizard.pm:128
+#: fs/partitioning_wizard.pm:129
 #, c-format
 msgid "Computing the size of the Microsoft Windows® partition"
 msgstr "正在計算 Microsoft Windows® 分割區大小"
 
-#: fs/partitioning_wizard.pm:164
+#: fs/partitioning_wizard.pm:165
 #, c-format
 msgid "Use the free space on a Microsoft Windows® partition"
 msgstr "使用 Microsoft Windows® 分割區中所剩餘的可用空間"
 
-#: fs/partitioning_wizard.pm:168
+#: fs/partitioning_wizard.pm:169
 #, c-format
 msgid "Which partition do you want to resize?"
 msgstr "您要重新調整那個分割區的大小？"
 
-#: fs/partitioning_wizard.pm:171
+#: fs/partitioning_wizard.pm:172
 #, c-format
 msgid ""
 "Your Microsoft Windows® partition is too fragmented. Please reboot your "
@@ -2583,7 +2583,7 @@ msgstr ""
 "您的 Microsoft Windows® 分割區太支離破碎。請先用 Microsoft Windows® 重新開"
 "機，執行 ``defrag'' 工具程式，然後重新開始安裝 Mandriva Linux 。"
 
-#: fs/partitioning_wizard.pm:179
+#: fs/partitioning_wizard.pm:180
 #, c-format
 msgid ""
 "WARNING!\n"
@@ -2617,73 +2617,73 @@ msgstr ""
 "當您確定之後，請按下%s。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:188 fs/partitioning_wizard.pm:551
+#: fs/partitioning_wizard.pm:189 fs/partitioning_wizard.pm:552
 #: interactive.pm:549 interactive/curses.pm:263 ugtk2.pm:519
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
-#: fs/partitioning_wizard.pm:194
+#: fs/partitioning_wizard.pm:195
 #, c-format
 msgid "Partitionning"
 msgstr "分割磁區"
 
-#: fs/partitioning_wizard.pm:194
+#: fs/partitioning_wizard.pm:195
 #, c-format
 msgid "Which size do you want to keep for Microsoft Windows® on partition %s?"
 msgstr "您要保留多少空間給 Microsoft Windows® 使用 分割區 %s?"
 
-#: fs/partitioning_wizard.pm:195
+#: fs/partitioning_wizard.pm:196
 #, c-format
 msgid "Size"
 msgstr "大小"
 
-#: fs/partitioning_wizard.pm:204
+#: fs/partitioning_wizard.pm:205
 #, c-format
 msgid "Resizing Microsoft Windows® partition"
 msgstr "正在重新調整 Microsoft Windows® 分割區大小"
 
-#: fs/partitioning_wizard.pm:209
+#: fs/partitioning_wizard.pm:210
 #, c-format
 msgid "FAT resizing failed: %s"
 msgstr "FAT 重新調整大小失敗： %s"
 
-#: fs/partitioning_wizard.pm:225
+#: fs/partitioning_wizard.pm:226
 #, c-format
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)"
 
-#: fs/partitioning_wizard.pm:230
+#: fs/partitioning_wizard.pm:231
 #, c-format
 msgid "Remove Microsoft Windows®"
 msgstr "移除 Microsoft Windows®"
 
-#: fs/partitioning_wizard.pm:230
+#: fs/partitioning_wizard.pm:231
 #, c-format
 msgid "Erase and use entire disk"
 msgstr "清除並使用整個磁碟"
 
-#: fs/partitioning_wizard.pm:234
+#: fs/partitioning_wizard.pm:235
 #, c-format
 msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr "您有多個硬碟，您打算用那一個來安裝 linux？"
 
-#: fs/partitioning_wizard.pm:242 fsedit.pm:600
+#: fs/partitioning_wizard.pm:243 fsedit.pm:610
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失"
 
-#: fs/partitioning_wizard.pm:252
+#: fs/partitioning_wizard.pm:253
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自訂磁碟分割"
 
-#: fs/partitioning_wizard.pm:258
+#: fs/partitioning_wizard.pm:259
 #, c-format
 msgid "Use fdisk"
 msgstr "使用 fdisk"
 
-#: fs/partitioning_wizard.pm:261
+#: fs/partitioning_wizard.pm:262
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -2692,37 +2692,37 @@ msgstr ""
 "您現在可以對 %s 分割區進行劃分動作.\n"
 "當您完成時, 別忘了使用 'w' 儲存"
 
-#: fs/partitioning_wizard.pm:401
+#: fs/partitioning_wizard.pm:402
 #, fuzzy, c-format
 msgid "Ext2/3/4"
 msgstr "Ext3"
 
-#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:571
+#: fs/partitioning_wizard.pm:432 fs/partitioning_wizard.pm:572
 #, c-format
 msgid "I can not find any room for installing"
 msgstr "找不到任何可用的安裝空間"
 
-#: fs/partitioning_wizard.pm:440 fs/partitioning_wizard.pm:578
+#: fs/partitioning_wizard.pm:441 fs/partitioning_wizard.pm:579
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分割精靈找到了下列方案："
 
-#: fs/partitioning_wizard.pm:511
+#: fs/partitioning_wizard.pm:512
 #, c-format
 msgid "Here is the content of your disk drive "
 msgstr ""
 
-#: fs/partitioning_wizard.pm:588
+#: fs/partitioning_wizard.pm:589
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "硬碟分割失敗：%s"
 
-#: fs/type.pm:390
+#: fs/type.pm:393
 #, c-format
 msgid "You can not use JFS for partitions smaller than 16MB"
 msgstr "小於 16MB 的分割區不能使用 JFS 格式"
 
-#: fs/type.pm:391
+#: fs/type.pm:394
 #, c-format
 msgid "You can not use ReiserFS for partitions smaller than 32MB"
 msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式"
@@ -2792,13 +2792,29 @@ msgstr ""
 "請確定會新增一個掛載於實體分割區的 /boot 目錄"
 
 #: fsedit.pm:437
+#, fuzzy, c-format
+msgid ""
+"You've selected an encrypted partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"您選擇了將一塊軟體磁碟陣列的分割區作為根目錄 (/) 的掛載點。\n"
+"但開機載入程式無法處理這種 /boot 目錄不位於實體分割區的情況。\n"
+"請確定會新增一個掛載於實體分割區的 /boot 目錄"
+
+#: fsedit.pm:443 fsedit.pm:461
+#, c-format
+msgid "You can not use an encrypted file system for mount point %s"
+msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
+
+#: fsedit.pm:447
 #, c-format
 msgid ""
 "You can not use the LVM Logical Volume for mount point %s since it spans "
 "physical volumes"
 msgstr "您不能使用 LVM 邏輯磁區來作為 %s 的掛載點，因為它跨越了實體磁區"
 
-#: fsedit.pm:439
+#: fsedit.pm:449
 #, c-format
 msgid ""
 "You've selected the LVM Logical Volume as root (/).\n"
@@ -2810,12 +2826,12 @@ msgstr ""
 "但開機載入程式無法在這個磁區跨越了實體磁區的情況下運作。\n"
 "您應該先建立一個 /boot 分割區"
 
-#: fsedit.pm:443 fsedit.pm:445
+#: fsedit.pm:453 fsedit.pm:455
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "這個目錄應該放在根檔案系統 (/) 才對"
 
-#: fsedit.pm:447 fsedit.pm:449
+#: fsedit.pm:457 fsedit.pm:459
 #, c-format
 msgid ""
 "You need a true filesystem (ext2/3/4, reiserfs, xfs, or jfs) for this mount "
@@ -2823,17 +2839,12 @@ msgid ""
 msgstr ""
 "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
 
-#: fsedit.pm:451
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
-
-#: fsedit.pm:516
+#: fsedit.pm:526
 #, c-format
 msgid "Not enough free space for auto-allocating"
 msgstr "沒有足夠的空間來進行自動配置"
 
-#: fsedit.pm:518
+#: fsedit.pm:528
 #, c-format
 msgid "Nothing to do"
 msgstr "沒有做任何動作"
@@ -6743,6 +6754,19 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安裝失敗"
 
+#~ msgid "Restrict command line options"
+#~ msgstr "限制命令列選項"
+
+#~ msgid "restrict"
+#~ msgstr "限制"
+
+#~ msgid ""
+#~ "Option ``Restrict command line options'' is of no use without a password"
+#~ msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
+
+#~ msgid "Use an encrypted file system"
+#~ msgstr "使用加密的檔案系統"
+
 #~ msgid ""
 #~ "To ensure data integrity after resizing the partition(s), \n"
 #~ "filesystem checks will be run on your next boot into Microsoft Windows®"