updated pot file

1 files changed, 2182 insertions, 2211 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index a4aeaf4c0..c2c842569 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -17,7 +17,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-05-31 13:03+0200\n"
+"POT-Creation-Date: 2005-06-17 16:16+0200\n"
 "PO-Revision-Date: 2005-03-19 13:18+0800\n"
 "Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -86,7 +86,7 @@ msgstr ""
 "請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n"
 "新插入隨身碟，最後重新啟動 Mandriva Move。"
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1325
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319
 #, c-format
 msgid "Reboot"
 msgstr "重新開機"
@@ -158,24 +158,24 @@ msgid "Please wait, detecting and configuring devices..."
 msgstr "請稍候，正在偵測與設定裝置中..."
 
 #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1658 install_any.pm:1681 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
+#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
+#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
+#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
+#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:184
+#: install_any.pm:1698 install_any.pm:1750 install_steps.pm:81
+#: install_steps_interactive.pm:37 interactive/http.pm:117
+#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:915 network/netconnect.pm:1021
-#: network/netconnect.pm:1025 network/netconnect.pm:1029
-#: network/netconnect.pm:1034 network/netconnect.pm:1166
-#: network/netconnect.pm:1170 network/netconnect.pm:1174
-#: network/netconnect.pm:1178 network/netconnect.pm:1287
-#: network/netconnect.pm:1292 network/netconnect.pm:1312
-#: network/netconnect.pm:1523 network/thirdparty.pm:265
-#: network/thirdparty.pm:272 network/thirdparty.pm:308
-#: network/thirdparty.pm:310 network/thirdparty.pm:331
-#: network/thirdparty.pm:355 printer/printerdrake.pm:244
+#: network/netconnect.pm:812 network/netconnect.pm:915
+#: network/netconnect.pm:919 network/netconnect.pm:923
+#: network/netconnect.pm:928 network/netconnect.pm:1058
+#: network/netconnect.pm:1062 network/netconnect.pm:1066
+#: network/netconnect.pm:1070 network/netconnect.pm:1178
+#: network/netconnect.pm:1183 network/netconnect.pm:1203
+#: network/netconnect.pm:1356 network/thirdparty.pm:267
+#: network/thirdparty.pm:274 network/thirdparty.pm:310
+#: network/thirdparty.pm:312 network/thirdparty.pm:333
+#: network/thirdparty.pm:357 printer/printerdrake.pm:244
 #: printer/printerdrake.pm:251 printer/printerdrake.pm:276
 #: printer/printerdrake.pm:422 printer/printerdrake.pm:427
 #: printer/printerdrake.pm:440 printer/printerdrake.pm:450
@@ -195,30 +195,30 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 #: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
 #: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
 #: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
+#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305
+#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406
+#: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592
+#: standalone/drakTermServ:392 standalone/drakTermServ:466
+#: standalone/drakTermServ:475 standalone/drakTermServ:770
+#: standalone/drakTermServ:777 standalone/drakTermServ:800
+#: standalone/drakTermServ:846 standalone/drakTermServ:1022
+#: standalone/drakTermServ:1502 standalone/drakTermServ:1518
+#: standalone/drakTermServ:1523 standalone/drakTermServ:1531
+#: standalone/drakTermServ:1543 standalone/drakTermServ:1564
 #: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
 #: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
+#: standalone/drakbackup:1645 standalone/drakbackup:1801
+#: standalone/drakbackup:2415 standalone/drakbackup:4104
+#: standalone/drakbackup:4324 standalone/drakclock:124
+#: standalone/drakconnect:672 standalone/drakconnect:676
+#: standalone/drakconnect:681 standalone/drakconnect:696
 #: standalone/drakfloppy:297 standalone/drakfloppy:300
 #: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakgw:51 standalone/drakgw:191
-#: standalone/drakgw:220 standalone/drakgw:261 standalone/drakgw:295
-#: standalone/drakgw:400 standalone/drakroam:41 standalone/draksplash:15
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
+#: standalone/drakfont:261 standalone/drakgw:50 standalone/drakgw:188
+#: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292
+#: standalone/drakgw:397 standalone/drakroam:41 standalone/draksplash:15
+#: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168
+#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
 #: standalone/scannerdrake:715 standalone/scannerdrake:726
 #: standalone/scannerdrake:865 standalone/scannerdrake:876
@@ -227,7 +227,7 @@ msgstr "請稍候，正在偵測與設定裝置中..."
 msgid "Error"
 msgstr "錯誤"
 
-#: ../move/move.pm:605 install_steps.pm:83
+#: ../move/move.pm:605 install_steps.pm:82
 #, c-format
 msgid ""
 "An error occurred, but I do not know how to handle it nicely.\n"
@@ -236,7 +236,7 @@ msgstr ""
 "發生了一個錯誤, 但我不知道該如何妥善處置它.\n"
 "要繼續安裝工作的話請小心."
 
-#: ../move/move.pm:660 install_steps_interactive.pm:38
+#: ../move/move.pm:660 install_steps_interactive.pm:37
 #, c-format
 msgid "An error occurred"
 msgstr "發生一個錯誤"
@@ -286,9 +286,9 @@ msgstr "殺死那些程式"
 msgid "No CDROM support"
 msgstr "沒有 CDROM 支援"
 
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
+#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
+#: diskdrake/interactive.pm:1035 diskdrake/interactive.pm:1045
+#: diskdrake/interactive.pm:1098
 #, c-format
 msgid "Read carefully!"
 msgstr "詳細閱讀！"
@@ -352,22 +352,22 @@ msgstr "32 MB"
 msgid "64 MB or more"
 msgstr "64 MB 或者更多"
 
-#: Xconfig/card.pm:159
+#: Xconfig/card.pm:155
 #, c-format
 msgid "X server"
 msgstr "X 伺服器"
 
-#: Xconfig/card.pm:160
+#: Xconfig/card.pm:156
 #, c-format
 msgid "Choose an X server"
 msgstr "選取一個 X 伺服器"
 
-#: Xconfig/card.pm:192
+#: Xconfig/card.pm:188
 #, c-format
 msgid "Multi-head configuration"
 msgstr "多頭端(Multi-head)設定"
 
-#: Xconfig/card.pm:193
+#: Xconfig/card.pm:189
 #, c-format
 msgid ""
 "Your system supports multiple head configuration.\n"
@@ -376,62 +376,62 @@ msgstr ""
 "您的系統支援多頭端(multiple head)設定組態.\n"
 "您打算怎麼做呢?"
 
-#: Xconfig/card.pm:262
+#: Xconfig/card.pm:258
 #, c-format
 msgid "Can not install Xorg package: %s"
 msgstr "無法安裝 Xorg 套件: %s"
 
-#: Xconfig/card.pm:272
+#: Xconfig/card.pm:268
 #, c-format
 msgid "Select the memory size of your graphics card"
 msgstr "選擇顯示卡上的記憶體大小"
 
-#: Xconfig/card.pm:349
+#: Xconfig/card.pm:345
 #, c-format
 msgid "Xorg configuration"
 msgstr "Xorg 設定"
 
-#: Xconfig/card.pm:351
+#: Xconfig/card.pm:347
 #, c-format
 msgid "Which configuration of Xorg do you want to have?"
 msgstr "您想要有哪一個 Xorg 設定?"
 
-#: Xconfig/card.pm:384
+#: Xconfig/card.pm:380
 #, c-format
 msgid "Configure all heads independently"
 msgstr "獨立設定所有頭端(head)"
 
-#: Xconfig/card.pm:385
+#: Xconfig/card.pm:381
 #, c-format
 msgid "Use Xinerama extension"
 msgstr "使用 Xinerama 延伸"
 
-#: Xconfig/card.pm:390
+#: Xconfig/card.pm:386
 #, c-format
 msgid "Configure only card \"%s\"%s"
 msgstr "僅設定 \"%s\"%s 卡"
 
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
+#: Xconfig/card.pm:398 Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
+#: Xconfig/card.pm:405 Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr "Xorg %s 含 3D 硬體加速功能"
 
-#: Xconfig/card.pm:411
+#: Xconfig/card.pm:407
 #, c-format
 msgid "Your card can have 3D hardware acceleration support with Xorg %s."
 msgstr "您的顯示卡搭配 Xorg %s 有 3D 硬體加速功能."
 
-#: Xconfig/card.pm:417
+#: Xconfig/card.pm:413
 #, c-format
 msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr "Xorg %s 搭配實驗性質 3D 硬體加速"
 
-#: Xconfig/card.pm:419
+#: Xconfig/card.pm:415
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support with Xorg %s,\n"
@@ -440,16 +440,16 @@ msgstr ""
 "您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n"
 "但是請注意，這是實驗性質的支援項目，而且可能會凍結您的電腦。"
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:926
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
 #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 install_steps_interactive.pm:1325
-#: printer/printerdrake.pm:744 printer/printerdrake.pm:4405
-#: printer/printerdrake.pm:4857 standalone/draksplash:85
-#: standalone/logdrake:174 standalone/net_applet:230
+#: install_steps_interactive.pm:85 install_steps_interactive.pm:1319
+#: printer/printerdrake.pm:744 printer/printerdrake.pm:4401
+#: printer/printerdrake.pm:4853 standalone/draksplash:85
+#: standalone/logdrake:173 standalone/net_applet:219
 #: standalone/scannerdrake:477
 #, c-format
 msgid "Quit"
@@ -465,7 +465,7 @@ msgstr "顯示卡"
 msgid "Monitor"
 msgstr "螢幕"
 
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
+#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286
 #, c-format
 msgid "Resolution"
 msgstr "解析度"
@@ -475,8 +475,8 @@ msgstr "解析度"
 msgid "Test"
 msgstr "測試"
 
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
+#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
+#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
 #: standalone/drakfont:491 standalone/drakfont:553
 #, c-format
 msgid "Options"
@@ -520,8 +520,8 @@ msgstr "隨插即用"
 msgid "Generic"
 msgstr "一般"
 
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
+#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
+#: standalone/harddrake2:88
 #, c-format
 msgid "Vendor"
 msgstr "廠商"
@@ -563,88 +563,88 @@ msgstr "水平更新頻率"
 msgid "Vertical refresh rate"
 msgstr "垂直更新頻率"
 
-#: Xconfig/resolution_and_depth.pm:12
+#: Xconfig/resolution_and_depth.pm:10
 #, c-format
 msgid "256 colors (8 bits)"
 msgstr "256 色 (8 位元)"
 
-#: Xconfig/resolution_and_depth.pm:13
+#: Xconfig/resolution_and_depth.pm:11
 #, c-format
 msgid "32 thousand colors (15 bits)"
 msgstr "3 萬 2 千色 (15 位元)"
 
-#: Xconfig/resolution_and_depth.pm:14
+#: Xconfig/resolution_and_depth.pm:12
 #, c-format
 msgid "65 thousand colors (16 bits)"
 msgstr "6 萬 5 千色 (16 位元)"
 
-#: Xconfig/resolution_and_depth.pm:15
+#: Xconfig/resolution_and_depth.pm:13
 #, c-format
 msgid "16 million colors (24 bits)"
 msgstr "1 千 6 百萬色 (24 位元)"
 
-#: Xconfig/resolution_and_depth.pm:129
+#: Xconfig/resolution_and_depth.pm:127
 #, c-format
 msgid "Resolutions"
 msgstr "解析度"
 
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
+#: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336
 #: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
+#: standalone/drakbackup:1583 standalone/drakperm:250
 #, c-format
 msgid "Other"
 msgstr "其他"
 
-#: Xconfig/resolution_and_depth.pm:359
+#: Xconfig/resolution_and_depth.pm:357
 #, c-format
 msgid "Choose the resolution and the color depth"
 msgstr "選取解析度以及顏色深度"
 
-#: Xconfig/resolution_and_depth.pm:360
+#: Xconfig/resolution_and_depth.pm:358
 #, c-format
 msgid "Graphics card: %s"
 msgstr "顯示卡：%s"
 
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:808 interactive/http.pm:103 interactive/http.pm:156
+#: Xconfig/resolution_and_depth.pm:372 interactive.pm:432
+#: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156
 #: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
+#: standalone/drakTermServ:199 standalone/drakTermServ:517
+#: standalone/drakbackup:1347 standalone/drakbackup:3961
+#: standalone/drakbackup:4021 standalone/drakbackup:4065
+#: standalone/drakconnect:158 standalone/drakconnect:848
+#: standalone/drakconnect:935 standalone/drakconnect:1031
 #: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:160 standalone/drakups:212 standalone/net_monitor:345
+#: standalone/draksplash:165 standalone/drakups:212 standalone/net_monitor:342
 #: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
 #, c-format
 msgid "Ok"
 msgstr "確定"
 
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
+#: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89
 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:831 interactive.pm:434 interactive/gtk.pm:812
+#: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
 #: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
+#: standalone/drakautoinst:215 standalone/drakbackup:1347
+#: standalone/drakbackup:3887 standalone/drakbackup:3891
+#: standalone/drakbackup:3949 standalone/drakconnect:157
+#: standalone/drakconnect:933 standalone/drakconnect:1030
 #: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:160 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
+#: standalone/draksplash:165 standalone/drakups:219 standalone/logdrake:173
+#: standalone/net_monitor:341 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
 #: ugtk2.pm:908
 #, c-format
 msgid "Cancel"
 msgstr "取消"
 
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:528
-#: interactive/gtk.pm:678 interactive/gtk.pm:680 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
+#: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150
+#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527
+#: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:284
+#: standalone/drakbackup:3883 standalone/drakbug:104
+#: standalone/drakconnect:153 standalone/drakconnect:236
+#: standalone/drakfont:509 standalone/drakperm:133 standalone/draksec:336
 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
 #: ugtk2.pm:1040 ugtk2.pm:1041
 #, c-format
@@ -782,27 +782,27 @@ msgstr ""
 msgid "What norm is your TV using?"
 msgstr "您的電視用什麼標準？"
 
-#: Xconfig/xfree.pm:630
+#: Xconfig/xfree.pm:646
 #, c-format
 msgid ""
 "_:weird aspect ratio\n"
 "other"
 msgstr ""
 
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:468
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
+#: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458
+#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
+#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:245
 #: standalone/service_harddrake:206
 #, c-format
 msgid "Please wait"
 msgstr "請稍候"
 
-#: any.pm:143
+#: any.pm:142
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "開機載入器安裝中"
 
-#: any.pm:154
+#: any.pm:153
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -813,12 +813,12 @@ msgid ""
 "Assign a new Volume ID?"
 msgstr ""
 
-#: any.pm:165
+#: any.pm:164
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "開機程式安裝失敗, 發生如下之錯誤："
 
-#: any.pm:171
+#: any.pm:170
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -835,7 +835,7 @@ msgstr ""
 "然後再輸入: shut-down\n"
 "然後你下一次開機時應該就可以看到開機啟動程式的訊息了。"
 
-#: any.pm:209
+#: any.pm:208
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -850,257 +850,257 @@ msgstr ""
 "\n"
 "您正用那顆硬碟開機呢?"
 
-#: any.pm:232 help.pm:739
+#: any.pm:231 help.pm:739
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "硬碟的第一個扇區 (MBR)"
 
-#: any.pm:233
+#: any.pm:232
 #, c-format
 msgid "First sector of the root partition"
 msgstr "根分隔區的第一扇區"
 
-#: any.pm:235
+#: any.pm:234
 #, c-format
 msgid "On Floppy"
 msgstr "在軟碟機"
 
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
+#: any.pm:236 help.pm:739 printer/printerdrake.pm:4061
 #, c-format
 msgid "Skip"
 msgstr "略過"
 
-#: any.pm:241
+#: any.pm:240
 #, c-format
 msgid "LILO/grub Installation"
 msgstr "LILO/GRUB 安裝"
 
-#: any.pm:242
+#: any.pm:241
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "您要將開機載入器安裝在那裡?"
 
-#: any.pm:268 standalone/drakboot:261
+#: any.pm:267 standalone/drakboot:261
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:270 any.pm:302
+#: any.pm:269 any.pm:301
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入器主要選項"
 
-#: any.pm:274
+#: any.pm:273
 #, c-format
 msgid "Give the ram size in MB"
 msgstr "輸入記憶體大小 (以 MB 為單位)"
 
-#: any.pm:276
+#: any.pm:275
 #, c-format
 msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無用"
 
-#: any.pm:277 any.pm:610 authentication.pm:182
+#: any.pm:276 any.pm:609 authentication.pm:181
 #, c-format
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
+#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1284
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
 
-#: any.pm:282 any.pm:305
+#: any.pm:281 any.pm:304
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入器"
 
-#: any.pm:284 any.pm:307
+#: any.pm:283 any.pm:306
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
 
-#: any.pm:286
+#: any.pm:285
 #, c-format
 msgid "Delay before booting default image"
 msgstr "在開機到預設的影像前的延遲"
 
-#: any.pm:287
+#: any.pm:286
 #, c-format
 msgid "Enable ACPI"
 msgstr "啟用 ACPI"
 
-#: any.pm:289
+#: any.pm:288
 #, c-format
 msgid "Force no APIC"
 msgstr "強制無 APIC"
 
-#: any.pm:291
+#: any.pm:290
 #, c-format
 msgid "Force No Local APIC"
 msgstr "強制無本地端 APIC"
 
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:659 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
+#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179
+#: network/netconnect.pm:566 printer/printerdrake.pm:1663
+#: printer/printerdrake.pm:1784 standalone/drakbackup:1627
+#: standalone/drakbackup:3490 standalone/drakups:299
 #, c-format
 msgid "Password"
 msgstr "密碼"
 
-#: any.pm:294 any.pm:638 authentication.pm:188
+#: any.pm:293 any.pm:644 authentication.pm:187
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
 
-#: any.pm:295
+#: any.pm:294
 #, c-format
 msgid "Restrict command line options"
 msgstr "限制命令列選項"
 
-#: any.pm:295
+#: any.pm:294
 #, c-format
 msgid "restrict"
 msgstr "限制"
 
-#: any.pm:297
+#: any.pm:296
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次開機時清理 /tmp"
 
-#: any.pm:298
+#: any.pm:297
 #, c-format
 msgid "Precise RAM size if needed (found %d MB)"
 msgstr "需要的話, 輸入精確的記憶體大小 (找到 %d MB)"
 
-#: any.pm:306
+#: any.pm:305
 #, c-format
 msgid "Init Message"
 msgstr "啟動訊息"
 
-#: any.pm:308
+#: any.pm:307
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "開啟 Firmware 延遲"
 
-#: any.pm:309
+#: any.pm:308
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心啟動時間逾時"
 
-#: any.pm:310
+#: any.pm:309
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允許 CD 開機?"
 
-#: any.pm:311
+#: any.pm:310
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "允許 OF 開機?"
 
-#: any.pm:312
+#: any.pm:311
 #, c-format
 msgid "Default OS?"
 msgstr "預設 OS?"
 
-#: any.pm:365
+#: any.pm:364
 #, c-format
 msgid "Image"
 msgstr "影像"
 
-#: any.pm:366 any.pm:376
+#: any.pm:365 any.pm:375
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:367 any.pm:389
+#: any.pm:366 any.pm:388
 #, c-format
 msgid "Append"
 msgstr "附加"
 
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
+#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
 #, c-format
 msgid "Video mode"
 msgstr "視訊模式"
 
-#: any.pm:371
+#: any.pm:370
 #, c-format
 msgid "Initrd"
 msgstr ""
 
-#: any.pm:372
+#: any.pm:371
 #, c-format
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:381 any.pm:386 any.pm:388
+#: any.pm:380 any.pm:385 any.pm:387
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
+#: any.pm:382 any.pm:392 harddrake/v4l.pm:273 standalone/drakfloppy:84
 #: standalone/drakfloppy:90 standalone/draksec:52
 #, c-format
 msgid "Default"
 msgstr "預設"
 
-#: any.pm:390
+#: any.pm:389
 #, c-format
 msgid "Initrd-size"
 msgstr "Initrd-大小"
 
-#: any.pm:392
+#: any.pm:391
 #, c-format
 msgid "NoVideo"
 msgstr ""
 
-#: any.pm:403
+#: any.pm:402
 #, c-format
 msgid "Empty label not allowed"
 msgstr "標籤空白不被允許"
 
-#: any.pm:404
+#: any.pm:403
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您需要指定一個核心影像"
 
-#: any.pm:404
+#: any.pm:403
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您需要指定一個 root 分割區"
 
-#: any.pm:405
+#: any.pm:404
 #, c-format
 msgid "This label is already used"
 msgstr "這個標籤已經被用過了"
 
-#: any.pm:419
+#: any.pm:418
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "您要新增哪一類的項目?"
 
-#: any.pm:420
+#: any.pm:419
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:420
+#: any.pm:419
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其他作業系統 (SunOS...)"
 
-#: any.pm:421
+#: any.pm:420
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其他作業系統 (MacOS...)"
 
-#: any.pm:421
+#: any.pm:420
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其他作業系統 (Windows...)"
 
-#: any.pm:449
+#: any.pm:448
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -1109,73 +1109,93 @@ msgstr ""
 "到此為止有這些選項於您的開機選單.\n"
 "您可以建立多的選項或修改既有的選項."
 
-#: any.pm:596
+#: any.pm:595
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:597
+#: any.pm:596
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 rpm 工具程式"
 
-#: any.pm:598
+#: any.pm:597
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:599
+#: any.pm:598
 #, c-format
 msgid "access to administrative files"
 msgstr "存取管理權限的的檔案"
 
-#: any.pm:600
+#: any.pm:599
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:601
+#: any.pm:600
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:606
+#: any.pm:605
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:611
+#: any.pm:610
 #, c-format
 msgid "This password is too simple"
 msgstr "這密碼太簡單了"
 
-#: any.pm:612
+#: any.pm:611
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:613
+#: any.pm:612
 #, c-format
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母, 數字, `-' 與 `_'"
 
-#: any.pm:614
+#: any.pm:613
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:615
+#: any.pm:614
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者早就已經被加入過了"
 
+#: any.pm:615 any.pm:646
+#, c-format
+msgid "User ID"
+msgstr "使用者 ID"
+
+#: any.pm:616 any.pm:647
+#, c-format
+msgid "Group ID"
+msgstr "群組 ID"
+
 #: any.pm:619
+#, fuzzy, c-format
+msgid "%s must be a number"
+msgstr "UIN 必須是數字。\n"
+
+#: any.pm:620
+#, c-format
+msgid "%s should be above 500. Accept anyway?"
+msgstr ""
+
+#: any.pm:625
 #, c-format
 msgid "Add user"
 msgstr "新增使用者"
 
-#: any.pm:620
+#: any.pm:626
 #, c-format
 msgid ""
 "Enter a user\n"
@@ -1184,93 +1204,77 @@ msgstr ""
 "輸入一位使用者\n"
 "%s"
 
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
+#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
+#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
 #: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
+#: printer/printerdrake.pm:382 printer/printerdrake.pm:4853
+#: standalone/drakbackup:2703 standalone/scannerdrake:668
 #: standalone/scannerdrake:818
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: any.pm:624 help.pm:51
+#: any.pm:630 help.pm:51
 #, c-format
 msgid "Accept user"
 msgstr "接受使用者"
 
-#: any.pm:635
+#: any.pm:641
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:636 standalone/drakbackup:1620
+#: any.pm:642 standalone/drakbackup:1622
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:639
+#: any.pm:645
 #, c-format
 msgid "Shell"
 msgstr "命令殼"
 
-#: any.pm:641
+#: any.pm:649
 #, c-format
 msgid "Icon"
 msgstr "圖示"
 
-#: any.pm:688 security/l10n.pm:14
+#: any.pm:696 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:689
+#: any.pm:697
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統."
 
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "您想要使用這個功能嗎?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:861
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/draksec:55 standalone/harddrake2:306
-#: standalone/net_applet:310 ugtk2.pm:907 wizards.pm:156
-#, c-format
-msgid "Yes"
-msgstr "是的"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:861 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:306 ugtk2.pm:907 wizards.pm:156
-#, c-format
-msgid "No"
-msgstr "否"
+#: any.pm:698
+#, fuzzy, c-format
+msgid "Use this feature"
+msgstr "關閉本資料夾"
 
-#: any.pm:692
+#: any.pm:699
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者:"
 
-#: any.pm:693
+#: any.pm:700
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理員:"
 
-#: any.pm:706
+#: any.pm:712 any.pm:779
 #, c-format
 msgid "Please choose a language to use."
 msgstr "請選擇要使用那個語系."
 
-#: any.pm:707
+#: any.pm:713 any.pm:780
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:733
+#: any.pm:740
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -1280,66 +1284,66 @@ msgstr ""
 "Mandriva Linux 能支援多種語言. 選擇您想安裝的語言.\n"
 "他們將可使用於您的安裝完成與您重新開始您的系統之後."
 
-#: any.pm:752 any.pm:773 help.pm:647
+#: any.pm:759 any.pm:788 help.pm:647
 #, c-format
 msgid "Use Unicode by default"
 msgstr "預設使用 Unicode"
 
-#: any.pm:753 help.pm:647
+#: any.pm:760 help.pm:647
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:798 help.pm:566 help.pm:855 install_steps_interactive.pm:952
+#: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:799
+#: any.pm:836
 #, c-format
 msgid "Please choose your country."
 msgstr "請選擇您的國家."
 
-#: any.pm:801
+#: any.pm:838
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:802
+#: any.pm:839
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:802 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
+#: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: interactive.pm:393
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:810
+#: any.pm:847
 #, c-format
 msgid "Input method:"
 msgstr "輸入方式:"
 
-#: any.pm:811 install_any.pm:406 network/netconnect.pm:187
-#: network/netconnect.pm:381 network/netconnect.pm:386
-#: network/netconnect.pm:1278 printer/printerdrake.pm:105
+#: any.pm:848 install_any.pm:418 network/netconnect.pm:156
+#: network/netconnect.pm:307 network/netconnect.pm:312
+#: network/netconnect.pm:1169 printer/printerdrake.pm:105
 #: printer/printerdrake.pm:2199
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:926
+#: any.pm:963
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:926
+#: any.pm:963
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:930
+#: any.pm:967
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -1354,42 +1358,42 @@ msgstr ""
 "\n"
 "\"Custom\" 允許每一個使用者粒度.\n"
 
-#: any.pm:942
+#: any.pm:979
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS: 傳統 Unix 檔案分享系統, 跟著少的 Mac 與 Windows 支援."
 
-#: any.pm:945
+#: any.pm:982
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB: 一個 Windows, Mac OS X 與許多先進的 Linux 系統用的檔案分享系統."
 
-#: any.pm:953
+#: any.pm:990
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出. 請選擇您想要用那一個."
 
-#: any.pm:978
+#: any.pm:1015
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:978 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
+#: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
 #: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
+#: printer/printerdrake.pm:5162 standalone/drakTermServ:294
+#: standalone/drakbackup:4083 standalone/drakbug:126 standalone/drakfont:497
+#: standalone/drakroam:242 standalone/net_monitor:120
 #: standalone/printerdrake:547
 #, c-format
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:980
+#: any.pm:1017
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -1398,197 +1402,197 @@ msgstr ""
 "每個使用者的分享都是使用 \"fileshare\" 群組.\n"
 "您可以執行 userdrake 在該群組內加入使用者."
 
-#: authentication.pm:24
+#: authentication.pm:23
 #, c-format
 msgid "Local file"
 msgstr "本地端檔案"
 
-#: authentication.pm:25
+#: authentication.pm:24
 #, c-format
 msgid "LDAP"
 msgstr "LDAP"
 
-#: authentication.pm:26
+#: authentication.pm:25
 #, c-format
 msgid "NIS"
 msgstr "NIS"
 
-#: authentication.pm:27
+#: authentication.pm:26
 #, c-format
 msgid "Smart Card"
 msgstr ""
 
-#: authentication.pm:28 authentication.pm:153
+#: authentication.pm:27 authentication.pm:152
 #, c-format
 msgid "Windows Domain"
 msgstr "Windows 網域"
 
-#: authentication.pm:29
+#: authentication.pm:28
 #, c-format
 msgid "Active Directory with SFU"
 msgstr ""
 
-#: authentication.pm:30
+#: authentication.pm:29
 #, c-format
 msgid "Active Directory with Winbind"
 msgstr ""
 
-#: authentication.pm:56
+#: authentication.pm:55
 #, c-format
 msgid "Local file:"
 msgstr "本地端檔案:"
 
-#: authentication.pm:56
+#: authentication.pm:55
 #, c-format
 msgid ""
 "Use local for all authentication and information user tell in local file"
 msgstr ""
 
-#: authentication.pm:57
+#: authentication.pm:56
 #, c-format
 msgid "LDAP:"
 msgstr "LDAP:"
 
-#: authentication.pm:57
+#: authentication.pm:56
 #, c-format
 msgid ""
 "Tells your computer to use LDAP for some or all authentication. LDAP "
 "consolidates certain types of information within your organization."
 msgstr ""
 
-#: authentication.pm:58
+#: authentication.pm:57
 #, c-format
 msgid "NIS:"
 msgstr "NIS:"
 
-#: authentication.pm:58
+#: authentication.pm:57
 #, c-format
 msgid ""
 "Allows you to run a group of computers in the same Network Information "
 "Service domain with a common password and group file."
 msgstr ""
 
-#: authentication.pm:59
+#: authentication.pm:58
 #, c-format
 msgid "Windows Domain:"
 msgstr "Windows 網域："
 
-#: authentication.pm:59
+#: authentication.pm:58
 #, c-format
 msgid ""
 "Winbind allows the system to retrieve information and authenticate users in "
 "a Windows domain."
 msgstr ""
 
-#: authentication.pm:60
+#: authentication.pm:59
 #, c-format
 msgid "Active Directory with SFU:"
 msgstr ""
 
-#: authentication.pm:60 authentication.pm:61
+#: authentication.pm:59 authentication.pm:60
 #, c-format
 msgid ""
 "Kerberos is a secure system for providing network authentication services."
 msgstr ""
 
-#: authentication.pm:61
+#: authentication.pm:60
 #, c-format
 msgid "Active Directory with Winbind:"
 msgstr ""
 
-#: authentication.pm:86
+#: authentication.pm:85
 #, c-format
 msgid "Authentication LDAP"
 msgstr "LDAP 認證"
 
-#: authentication.pm:87
+#: authentication.pm:86
 #, c-format
 msgid "LDAP Base dn"
 msgstr ""
 
-#: authentication.pm:88 share/compssUsers.pl:101
+#: authentication.pm:87 share/compssUsers.pl:102
 #, c-format
 msgid "LDAP Server"
 msgstr "LDAP 伺服器"
 
-#: authentication.pm:101 fsedit.pm:21
+#: authentication.pm:100 fsedit.pm:23
 #, c-format
 msgid "simple"
 msgstr "簡單"
 
-#: authentication.pm:102
+#: authentication.pm:101
 #, c-format
 msgid "TLS"
 msgstr ""
 
-#: authentication.pm:103
+#: authentication.pm:102
 #, c-format
 msgid "SSL"
 msgstr "SSL"
 
-#: authentication.pm:104
+#: authentication.pm:103
 #, c-format
 msgid "security layout (SASL/Kerberos)"
 msgstr "安全性佈置 (SASL/Kerberos)"
 
-#: authentication.pm:111 authentication.pm:149
+#: authentication.pm:110 authentication.pm:148
 #, c-format
 msgid "Authentication Active Directory"
 msgstr "Active Directory 認證"
 
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
+#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180
 #, c-format
 msgid "Domain"
 msgstr "網域"
 
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
+#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
+#: printer/printerdrake.pm:141 share/compssUsers.pl:82
+#: standalone/drakTermServ:269
 #, c-format
 msgid "Server"
 msgstr "伺服器"
 
-#: authentication.pm:115
+#: authentication.pm:114
 #, c-format
 msgid "LDAP users database"
 msgstr "LDAP 使用者資料庫"
 
-#: authentication.pm:116
+#: authentication.pm:115
 #, c-format
 msgid "Use Anonymous BIND "
 msgstr ""
 
-#: authentication.pm:117
+#: authentication.pm:116
 #, c-format
 msgid "LDAP user allowed to browse the Active Directory"
 msgstr ""
 
-#: authentication.pm:118
+#: authentication.pm:117
 #, c-format
 msgid "Password for user"
 msgstr "使用者密碼"
 
-#: authentication.pm:119
+#: authentication.pm:118
 #, c-format
 msgid "Encryption"
 msgstr "加密"
 
-#: authentication.pm:130
+#: authentication.pm:129
 #, c-format
 msgid "Authentication NIS"
 msgstr "NIS 認證"
 
-#: authentication.pm:131
+#: authentication.pm:130
 #, c-format
 msgid "NIS Domain"
 msgstr "NIS 網域"
 
-#: authentication.pm:132
+#: authentication.pm:131
 #, c-format
 msgid "NIS Server"
 msgstr "NIS 伺服器"
 
-#: authentication.pm:137
+#: authentication.pm:136
 #, c-format
 msgid ""
 "For this to work for a W2K PDC, you will probably need to have the admin "
@@ -1614,70 +1618,70 @@ msgstr ""
 "號與密碼.\n"
 "最後使用 'wbinfo -t' 測試確認認證功能是否可以正常工作."
 
-#: authentication.pm:149
+#: authentication.pm:148
 #, c-format
 msgid "Authentication Windows Domain"
 msgstr "Windows 網域認證"
 
-#: authentication.pm:154
+#: authentication.pm:153
 #, c-format
 msgid "Domain Admin User Name"
 msgstr "網域管理使用者名稱"
 
-#: authentication.pm:155
+#: authentication.pm:154
 #, c-format
 msgid "Domain Admin Password"
 msgstr "網域管理密碼"
 
-#: authentication.pm:156
+#: authentication.pm:155
 #, c-format
 msgid "Use Idmap for store UID/SID "
 msgstr "使用 ldmap 來儲存 UID/SID"
 
-#: authentication.pm:157
+#: authentication.pm:156
 #, c-format
 msgid "Default Idmap "
 msgstr "預設 Idmap"
 
-#: authentication.pm:171
+#: authentication.pm:170
 #, c-format
 msgid "Set administrator (root) password and network authentication methods"
 msgstr "設定管理者 (root) 密碼與網路認證方式"
 
-#: authentication.pm:172
+#: authentication.pm:171
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "設定管理者 (root) 密碼"
 
-#: authentication.pm:173 standalone/drakvpn:1125
+#: authentication.pm:172 standalone/drakvpn:1125
 #, c-format
 msgid "Authentication method"
 msgstr "認證方式"
 
 #. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
+#: authentication.pm:177 help.pm:722
 #, c-format
 msgid "No password"
 msgstr "沒有密碼"
 
-#: authentication.pm:184
+#: authentication.pm:183
 #, c-format
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr "這個密碼太短了 (一定至少要有 %d 個字元才行)"
 
-#: authentication.pm:189 network/netconnect.pm:386 network/netconnect.pm:660
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
+#: authentication.pm:188 network/netconnect.pm:312 network/netconnect.pm:567
+#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
 #, c-format
 msgid "Authentication"
 msgstr "認證方式"
 
-#: authentication.pm:302
+#: authentication.pm:307
 #, c-format
 msgid "Can not use broadcast with no NIS domain"
 msgstr "沒有 NIS 網域無法使用廣播 (broadcast)"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
+#: bootloader.pm:753
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1692,229 +1696,229 @@ msgstr ""
 "稍待由預設的作業系統開機。\n"
 "\n"
 
-#: bootloader.pm:851
+#: bootloader.pm:853
 #, c-format
 msgid "LILO with graphical menu"
 msgstr "LILO 圖形介面選單"
 
-#: bootloader.pm:852
+#: bootloader.pm:854
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO 文字選單"
 
-#: bootloader.pm:853
+#: bootloader.pm:855
 #, c-format
 msgid "Grub"
 msgstr "Grub"
 
-#: bootloader.pm:854
+#: bootloader.pm:856
 #, c-format
 msgid "Yaboot"
 msgstr ""
 
-#: bootloader.pm:929
+#: bootloader.pm:931
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 沒有足夠的空間"
 
-#: bootloader.pm:1389
+#: bootloader.pm:1403
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "您不能把開機載入程式安裝在 %s 分割區上\n"
 
-#: bootloader.pm:1423
+#: bootloader.pm:1437
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
-#: bootloader.pm:1436
+#: bootloader.pm:1450
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
 
-#: bootloader.pm:1437
+#: bootloader.pm:1451
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安裝開機載入程式"
 
-#: common.pm:139
+#: common.pm:130
 #, c-format
 msgid "KB"
 msgstr "KB"
 
-#: common.pm:139
+#: common.pm:130
 #, c-format
 msgid "MB"
 msgstr "MB"
 
-#: common.pm:139
+#: common.pm:130
 #, c-format
 msgid "GB"
 msgstr "GB"
 
-#: common.pm:147
+#: common.pm:138
 #, c-format
 msgid "TB"
 msgstr "TB"
 
-#: common.pm:155
+#: common.pm:146
 #, c-format
 msgid "%d minutes"
 msgstr "%d 分鐘"
 
-#: common.pm:157
+#: common.pm:148
 #, c-format
 msgid "1 minute"
 msgstr "1 分鐘"
 
-#: common.pm:159
+#: common.pm:150
 #, c-format
 msgid "%d seconds"
 msgstr "%d 秒"
 
-#: common.pm:261
+#: common.pm:252
 #, c-format
 msgid "kdesu missing"
 msgstr "kdesu 遺失"
 
-#: common.pm:264
+#: common.pm:255
 #, c-format
 msgid "consolehelper missing"
 msgstr "consolehelper 遺失"
 
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
+#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84
 #, c-format
 msgid "Austria"
 msgstr "澳洲"
 
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
+#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
 #, c-format
 msgid "Australia"
 msgstr "澳洲"
 
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
+#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:52
+#: network/adsl_consts.pm:123 network/netconnect.pm:44
 #, c-format
 msgid "Belgium"
 msgstr "比利時"
 
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
+#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152
 #: network/adsl_consts.pm:161
 #, c-format
 msgid "Brazil"
 msgstr "巴西"
 
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
+#: crypto.pm:17 crypto.pm:51 lang.pm:230
 #, c-format
 msgid "Canada"
 msgstr "加拿大"
 
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
+#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
+#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
 #, c-format
 msgid "Switzerland"
 msgstr "Switzerland"
 
-#: crypto.pm:20 lang.pm:242
+#: crypto.pm:19 lang.pm:242
 #, c-format
 msgid "Costa Rica"
 msgstr "哥斯大黎加"
 
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
+#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
 #, c-format
 msgid "Czech Republic"
 msgstr "捷克共和國"
 
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
+#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
 #: network/adsl_consts.pm:508
 #, c-format
 msgid "Germany"
 msgstr "德國"
 
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
+#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
 #, c-format
 msgid "Denmark"
 msgstr "丹麥"
 
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
+#: crypto.pm:23 crypto.pm:54 lang.pm:256
 #, c-format
 msgid "Estonia"
 msgstr "愛沙尼亞"
 
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
+#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
+#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
+#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
+#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
+#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
+#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
+#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
 #, c-format
 msgid "Spain"
 msgstr "西班牙"
 
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
+#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
 #, c-format
 msgid "Finland"
 msgstr "芬蘭"
 
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
+#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420
 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442
 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466
 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:49
+#: network/netconnect.pm:41
 #, c-format
 msgid "France"
 msgstr "法國"
 
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
+#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
 #, c-format
 msgid "Greece"
 msgstr "希臘"
 
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
+#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
 #, c-format
 msgid "Hungary"
 msgstr "匈牙利"
 
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
+#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
 #: standalone/drakxtv:47
 #, c-format
 msgid "Ireland"
 msgstr "愛爾蘭"
 
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
+#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
 #, c-format
 msgid "Israel"
 msgstr "以色列"
 
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
+#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:51 standalone/drakxtv:47
+#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
 #, c-format
 msgid "Italy"
 msgstr "義大利"
 
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
+#: crypto.pm:32 crypto.pm:63 lang.pm:303
 #, c-format
 msgid "Japan"
 msgstr "日本"
 
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
+#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:50
+#: network/adsl_consts.pm:647 network/netconnect.pm:42
 #, c-format
 msgid "Netherlands"
 msgstr "荷蘭"
 
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
+#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666
 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676
 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686
@@ -1922,53 +1926,53 @@ msgstr "荷蘭"
 msgid "Norway"
 msgstr "挪威"
 
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
+#: crypto.pm:35 crypto.pm:65 lang.pm:357
 #, c-format
 msgid "New Zealand"
 msgstr "紐西蘭"
 
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
+#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
 #: network/adsl_consts.pm:704
 #, c-format
 msgid "Poland"
 msgstr "波蘭"
 
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
+#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
 #, c-format
 msgid "Portugal"
 msgstr "葡萄牙"
 
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
+#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
 #, c-format
 msgid "Russia"
 msgstr "蘇俄"
 
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
+#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
 #, c-format
 msgid "Sweden"
 msgstr "瑞典"
 
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
+#: crypto.pm:40 crypto.pm:70 lang.pm:387
 #, c-format
 msgid "Slovakia"
 msgstr "Slovakia"
 
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
+#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
 #, c-format
 msgid "Thailand"
 msgstr "泰國"
 
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
+#: crypto.pm:42 crypto.pm:75 lang.pm:411
 #, c-format
 msgid "Taiwan"
 msgstr "台灣"
 
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
+#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
 #, c-format
 msgid "South Africa"
 msgstr "南非"
 
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:53
+#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
 #, c-format
 msgid "United States"
 msgstr "美國"
@@ -1987,19 +1991,19 @@ msgstr ""
 msgid "New"
 msgstr "新增"
 
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
 #, c-format
 msgid "Unmount"
 msgstr "卸載"
 
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
+#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Mount"
 msgstr "掛載"
 
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
+#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
+#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
@@ -2019,23 +2023,23 @@ msgstr "URL 格式必須為 http:// 或是 https://"
 msgid "Server: "
 msgstr "伺服器："
 
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
+#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
+#: diskdrake/interactive.pm:1177 diskdrake/interactive.pm:1252
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
+#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1259
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
 
-#: diskdrake/hd_gtk.pm:95
+#: diskdrake/hd_gtk.pm:92
 #, c-format
 msgid "Please make a backup of your data first"
 msgstr "請您先備份您的資料"
 
-#: diskdrake/hd_gtk.pm:98
+#: diskdrake/hd_gtk.pm:95
 #, c-format
 msgid ""
 "If you plan to use aboot, be careful to leave a free space (2048 sectors is "
@@ -2045,17 +2049,17 @@ msgstr ""
 "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空"
 "間 (2048 扇區就足夠了)"
 
-#: diskdrake/hd_gtk.pm:155 help.pm:530
+#: diskdrake/hd_gtk.pm:152 help.pm:530
 #, c-format
 msgid "Wizard"
 msgstr "精靈"
 
-#: diskdrake/hd_gtk.pm:188
+#: diskdrake/hd_gtk.pm:185
 #, c-format
 msgid "Choose action"
 msgstr "選擇動作"
 
-#: diskdrake/hd_gtk.pm:192
+#: diskdrake/hd_gtk.pm:189
 #, c-format
 msgid ""
 "You have one big Microsoft Windows partition.\n"
@@ -2066,128 +2070,128 @@ msgstr ""
 "建議您先重新改變這個分割區的大小\n"
 "(點選它，然後按 \"重新改變大小\")"
 
-#: diskdrake/hd_gtk.pm:194
+#: diskdrake/hd_gtk.pm:191
 #, c-format
 msgid "Please click on a partition"
 msgstr "請點選一個分割區"
 
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
+#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482
+#: standalone/drakbackup:2938 standalone/drakbackup:2998
 #, c-format
 msgid "Details"
 msgstr "詳細資訊"
 
-#: diskdrake/hd_gtk.pm:254
+#: diskdrake/hd_gtk.pm:251
 #, c-format
 msgid "No hard drives found"
 msgstr "找不到硬碟裝置"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "Ext2"
 msgstr "Ext2"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "Journalised FS"
 msgstr "日誌式檔案系統 (JFS)"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "Swap"
 msgstr "Swap"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "SunOS"
 msgstr "SunOS"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "HFS"
 msgstr "HFS"
 
-#: diskdrake/hd_gtk.pm:338
+#: diskdrake/hd_gtk.pm:335
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
+#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1192
 #, c-format
 msgid "Empty"
 msgstr "空白"
 
-#: diskdrake/hd_gtk.pm:343
+#: diskdrake/hd_gtk.pm:340
 #, c-format
 msgid "Filesystem types:"
 msgstr "檔案系統格式："
 
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
+#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
 #, c-format
 msgid "Use ``%s'' instead"
 msgstr "用 ``%s'' 代替"
 
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
+#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
 #, c-format
 msgid "Create"
 msgstr "建立"
 
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
+#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
+#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
+#: standalone/harddrake2:108 standalone/harddrake2:117
 #, c-format
 msgid "Type"
 msgstr "格式"
 
 #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
+#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
+#: standalone/drakperm:123 standalone/printerdrake:235
 #, c-format
 msgid "Delete"
 msgstr "刪除"
 
-#: diskdrake/hd_gtk.pm:368
+#: diskdrake/hd_gtk.pm:365
 #, c-format
 msgid "Use ``Unmount'' first"
 msgstr "要先 ``Unmount''"
 
-#: diskdrake/interactive.pm:191
+#: diskdrake/interactive.pm:194
 #, c-format
 msgid "Choose another partition"
 msgstr "選擇另一個分割區"
 
-#: diskdrake/interactive.pm:191
+#: diskdrake/interactive.pm:194
 #, c-format
 msgid "Choose a partition"
 msgstr "選擇一個分割區"
 
-#: diskdrake/interactive.pm:220
+#: diskdrake/interactive.pm:223
 #, c-format
 msgid "Exit"
 msgstr "離開"
 
-#: diskdrake/interactive.pm:253 help.pm:530
+#: diskdrake/interactive.pm:256 help.pm:530
 #, c-format
 msgid "Undo"
 msgstr "復原"
 
-#: diskdrake/interactive.pm:253
+#: diskdrake/interactive.pm:256
 #, c-format
 msgid "Toggle to normal mode"
 msgstr "切換到一般模式"
 
-#: diskdrake/interactive.pm:253
+#: diskdrake/interactive.pm:256
 #, c-format
 msgid "Toggle to expert mode"
 msgstr "切換到專家模式"
 
-#: diskdrake/interactive.pm:272
+#: diskdrake/interactive.pm:275
 #, c-format
 msgid "Continue anyway?"
 msgstr "無論如何都要繼續嗎？"
 
-#: diskdrake/interactive.pm:275
+#: diskdrake/interactive.pm:278
 #, c-format
 msgid ""
 "You should format partition %s.\n"
@@ -2198,110 +2202,110 @@ msgstr ""
 "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
 "仍然要離開嗎？"
 
-#: diskdrake/interactive.pm:282
+#: diskdrake/interactive.pm:285
 #, c-format
 msgid "Quit without saving"
 msgstr "不儲存就離開"
 
-#: diskdrake/interactive.pm:282
+#: diskdrake/interactive.pm:285
 #, c-format
 msgid "Quit without writing the partition table?"
 msgstr "放棄寫入硬碟分割表就離開？"
 
-#: diskdrake/interactive.pm:287
+#: diskdrake/interactive.pm:290
 #, c-format
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"
 
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
+#: diskdrake/interactive.pm:297 install_steps_interactive.pm:329
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "您必須重新開機以使更動過的硬碟分割表生效"
 
-#: diskdrake/interactive.pm:307 help.pm:530
+#: diskdrake/interactive.pm:310 help.pm:530
 #, c-format
 msgid "Clear all"
 msgstr "全部清除"
 
-#: diskdrake/interactive.pm:308 help.pm:530
+#: diskdrake/interactive.pm:311 help.pm:530
 #, c-format
 msgid "Auto allocate"
 msgstr "自動分配"
 
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
+#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
+#: help.pm:855 install_steps_interactive.pm:121
 #, c-format
 msgid "More"
 msgstr "更多"
 
-#: diskdrake/interactive.pm:314
+#: diskdrake/interactive.pm:317
 #, c-format
 msgid "Hard drive information"
 msgstr "硬碟資訊"
 
-#: diskdrake/interactive.pm:346
+#: diskdrake/interactive.pm:349
 #, c-format
 msgid "All primary partitions are used"
 msgstr "主分割區數目已經全被用了"
 
-#: diskdrake/interactive.pm:347
+#: diskdrake/interactive.pm:350
 #, c-format
 msgid "I can not add any more partitions"
 msgstr "我無法再新增任何分割區了"
 
-#: diskdrake/interactive.pm:348
+#: diskdrake/interactive.pm:351
 #, c-format
 msgid ""
 "To have more partitions, please delete one to be able to create an extended "
 "partition"
 msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區"
 
-#: diskdrake/interactive.pm:357
+#: diskdrake/interactive.pm:360
 #, c-format
 msgid "No supermount"
 msgstr ""
 
-#: diskdrake/interactive.pm:358
+#: diskdrake/interactive.pm:361
 #, c-format
 msgid "Supermount"
 msgstr ""
 
-#: diskdrake/interactive.pm:359
+#: diskdrake/interactive.pm:362
 #, c-format
 msgid "Supermount except for CDROM drives"
 msgstr ""
 
-#: diskdrake/interactive.pm:365 help.pm:530
+#: diskdrake/interactive.pm:368 help.pm:530
 #, c-format
 msgid "Save partition table"
 msgstr "寫入硬碟分割表"
 
-#: diskdrake/interactive.pm:366 help.pm:530
+#: diskdrake/interactive.pm:369 help.pm:530
 #, c-format
 msgid "Restore partition table"
 msgstr "回存硬碟分割表"
 
-#: diskdrake/interactive.pm:367 help.pm:530
+#: diskdrake/interactive.pm:370 help.pm:530
 #, c-format
 msgid "Rescue partition table"
 msgstr "搶救硬碟分割表"
 
-#: diskdrake/interactive.pm:369 help.pm:530
+#: diskdrake/interactive.pm:372 help.pm:530
 #, c-format
 msgid "Reload partition table"
 msgstr "重新載入硬碟分割表"
 
-#: diskdrake/interactive.pm:371
+#: diskdrake/interactive.pm:374
 #, c-format
 msgid "Removable media automounting"
 msgstr "可移除式裝置自動掛載"
 
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
+#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
 #, c-format
 msgid "Select file"
 msgstr "選擇檔案"
 
-#: diskdrake/interactive.pm:396
+#: diskdrake/interactive.pm:399
 #, c-format
 msgid ""
 "The backup partition table has not the same size\n"
@@ -2310,87 +2314,87 @@ msgstr ""
 "備份的硬碟分割表有不一樣的大小\n"
 "要繼續嗎？"
 
-#: diskdrake/interactive.pm:425
+#: diskdrake/interactive.pm:428
 #, c-format
 msgid "Trying to rescue partition table"
 msgstr "正在試圖救回硬碟分割表"
 
-#: diskdrake/interactive.pm:431
+#: diskdrake/interactive.pm:434
 #, c-format
 msgid "Detailed information"
 msgstr "詳細資訊"
 
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
+#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
 
-#: diskdrake/interactive.pm:447
+#: diskdrake/interactive.pm:450
 #, c-format
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:449
+#: diskdrake/interactive.pm:452
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:450
+#: diskdrake/interactive.pm:453
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
 
-#: diskdrake/interactive.pm:453
+#: diskdrake/interactive.pm:456
 #, c-format
 msgid "Remove from RAID"
 msgstr "由磁碟陣列中移除"
 
-#: diskdrake/interactive.pm:454
+#: diskdrake/interactive.pm:457
 #, c-format
 msgid "Remove from LVM"
 msgstr "由 LVM 中移除"
 
-#: diskdrake/interactive.pm:455
+#: diskdrake/interactive.pm:458
 #, c-format
 msgid "Modify RAID"
 msgstr "變更磁碟陣列"
 
-#: diskdrake/interactive.pm:456
+#: diskdrake/interactive.pm:459
 #, c-format
 msgid "Use for loopback"
 msgstr "作為 loopback"
 
-#: diskdrake/interactive.pm:512
+#: diskdrake/interactive.pm:514
 #, c-format
 msgid "Create a new partition"
 msgstr "建立新的分割區"
 
-#: diskdrake/interactive.pm:515
+#: diskdrake/interactive.pm:517
 #, c-format
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
+#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:915
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB):"
 
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
+#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:916
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
 
-#: diskdrake/interactive.pm:523
+#: diskdrake/interactive.pm:525
 #, c-format
 msgid "Preference: "
 msgstr "偏好設定："
 
-#: diskdrake/interactive.pm:526
+#: diskdrake/interactive.pm:528
 #, c-format
 msgid "Logical volume name "
 msgstr "邏輯磁區名稱"
 
-#: diskdrake/interactive.pm:556
+#: diskdrake/interactive.pm:558
 #, c-format
 msgid ""
 "You can not create a new partition\n"
@@ -2401,43 +2405,43 @@ msgstr ""
 "(因為您已經達到主分割區的最大值)。\n"
 "您需要先移除一個主分割區然後建立一個延伸分割區。"
 
-#: diskdrake/interactive.pm:586
+#: diskdrake/interactive.pm:588
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:605
+#: diskdrake/interactive.pm:607
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:617
+#: diskdrake/interactive.pm:619
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:626
+#: diskdrake/interactive.pm:628
 #, c-format
 msgid "Switching from ext2 to ext3"
 msgstr "由 ext2 正在切換到 ext3"
 
-#: diskdrake/interactive.pm:655
+#: diskdrake/interactive.pm:657
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:656
+#: diskdrake/interactive.pm:658
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:661
+#: diskdrake/interactive.pm:663
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -2446,165 +2450,165 @@ msgstr ""
 "因為這個分割區被用作 loop back 使用，所以無法解除\n"
 "這個掛載點。請先取消 loopback 的設定"
 
-#: diskdrake/interactive.pm:686
+#: diskdrake/interactive.pm:688
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
+#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
 #: install_interactive.pm:156 install_interactive.pm:188
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:710
+#: diskdrake/interactive.pm:712
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:750
+#: diskdrake/interactive.pm:748
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:755
+#: diskdrake/interactive.pm:753
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "所有在這個分割區上的資料都應該先經過備份"
 
-#: diskdrake/interactive.pm:757
+#: diskdrake/interactive.pm:755
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:762
+#: diskdrake/interactive.pm:760
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:763
+#: diskdrake/interactive.pm:761
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
+#: diskdrake/interactive.pm:802 install_interactive.pm:196
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s), \n"
 "filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: diskdrake/interactive.pm:844
+#: diskdrake/interactive.pm:840
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
+#: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859
 #, c-format
 msgid "new"
 msgstr "新的"
 
-#: diskdrake/interactive.pm:861
+#: diskdrake/interactive.pm:857
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:867
+#: diskdrake/interactive.pm:863
 #, c-format
 msgid "LVM name?"
 msgstr "LVM 名稱？"
 
-#: diskdrake/interactive.pm:904
+#: diskdrake/interactive.pm:900
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "這個分割區不能用來作為 loopback"
 
-#: diskdrake/interactive.pm:917
+#: diskdrake/interactive.pm:913
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:918
+#: diskdrake/interactive.pm:914
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:923
+#: diskdrake/interactive.pm:919
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:926
+#: diskdrake/interactive.pm:922
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:927
+#: diskdrake/interactive.pm:923
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:950
+#: diskdrake/interactive.pm:946
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:957
+#: diskdrake/interactive.pm:953
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1021
+#: diskdrake/interactive.pm:1017
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1022
+#: diskdrake/interactive.pm:1018
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1023
+#: diskdrake/interactive.pm:1019
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 Kib 計量"
 
-#: diskdrake/interactive.pm:1040
+#: diskdrake/interactive.pm:1036
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1055
+#: diskdrake/interactive.pm:1051
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1093
+#: diskdrake/interactive.pm:1089
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: diskdrake/interactive.pm:1102
+#: diskdrake/interactive.pm:1098
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk!"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1115
+#: diskdrake/interactive.pm:1107
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1131
+#: diskdrake/interactive.pm:1123
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1131
+#: diskdrake/interactive.pm:1123
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1132
+#: diskdrake/interactive.pm:1124
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -2613,108 +2617,108 @@ msgstr ""
 "%s 目錄已經包含了資料了\n"
 "(%s)"
 
-#: diskdrake/interactive.pm:1143
+#: diskdrake/interactive.pm:1135
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1147
+#: diskdrake/interactive.pm:1139
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1151
+#: diskdrake/interactive.pm:1143
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1165
+#: diskdrake/interactive.pm:1157
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "該分割區 %s 目前被認知為 %s"
 
-#: diskdrake/interactive.pm:1166
+#: diskdrake/interactive.pm:1158
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
+#: diskdrake/interactive.pm:1178 diskdrake/interactive.pm:1237
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1187
+#: diskdrake/interactive.pm:1179
 #, c-format
 msgid "Devfs name: "
 msgstr "Devfs 名稱："
 
-#: diskdrake/interactive.pm:1188
+#: diskdrake/interactive.pm:1180
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤：\""
 
-#: diskdrake/interactive.pm:1189
+#: diskdrake/interactive.pm:1181
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
+#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1194
+#: diskdrake/interactive.pm:1255
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:296
+#: diskdrake/interactive.pm:1189 install_steps_gtk.pm:296
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1204
+#: diskdrake/interactive.pm:1196
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1205
+#: diskdrake/interactive.pm:1197
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1207
+#: diskdrake/interactive.pm:1199
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1209
+#: diskdrake/interactive.pm:1201
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1210
+#: diskdrake/interactive.pm:1202
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr ""
 
-#: diskdrake/interactive.pm:1211
+#: diskdrake/interactive.pm:1203
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1212
+#: diskdrake/interactive.pm:1204
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1213
+#: diskdrake/interactive.pm:1205
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1214
+#: diskdrake/interactive.pm:1206
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1216
+#: diskdrake/interactive.pm:1208
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2723,7 +2727,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1217
+#: diskdrake/interactive.pm:1209
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2732,27 +2736,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1219
+#: diskdrake/interactive.pm:1211
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1220
+#: diskdrake/interactive.pm:1212
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1221
+#: diskdrake/interactive.pm:1213
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1223
+#: diskdrake/interactive.pm:1215
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1226
+#: diskdrake/interactive.pm:1218
 #, c-format
 msgid ""
 "\n"
@@ -2765,7 +2769,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1229
+#: diskdrake/interactive.pm:1221
 #, c-format
 msgid ""
 "\n"
@@ -2777,73 +2781,73 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1246
+#: diskdrake/interactive.pm:1238
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1247
+#: diskdrake/interactive.pm:1239
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1248
+#: diskdrake/interactive.pm:1240
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1249
+#: diskdrake/interactive.pm:1241
 #, c-format
 msgid "Info: "
 msgstr "資訊："
 
-#: diskdrake/interactive.pm:1250
+#: diskdrake/interactive.pm:1242
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1251
+#: diskdrake/interactive.pm:1243
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1252
+#: diskdrake/interactive.pm:1244
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1287
+#: diskdrake/interactive.pm:1279
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:1288
+#: diskdrake/interactive.pm:1280
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1291
+#: diskdrake/interactive.pm:1283
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1292
+#: diskdrake/interactive.pm:1284
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1122
-#: standalone/drakconnect:430
+#: diskdrake/interactive.pm:1287 network/netconnect.pm:1014
+#: standalone/drakconnect:419
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:1296
+#: diskdrake/interactive.pm:1288
 #, c-format
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
+#: diskdrake/interactive.pm:1289 standalone/drakvpn:1031
 #: standalone/drakvpn:1116
 #, fuzzy, c-format
 msgid "Encryption algorithm"
@@ -2854,43 +2858,43 @@ msgstr "認證方式"
 msgid "Change type"
 msgstr "改變分割區格式"
 
-#: diskdrake/smbnfs_gtk.pm:163
+#: diskdrake/smbnfs_gtk.pm:162
 #, c-format
 msgid "Can not login using username %s (bad password?)"
 msgstr "無法使用 %s 使用者名稱登入系統 (密碼錯誤?)"
 
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
+#: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175
 #, c-format
 msgid "Domain Authentication Required"
 msgstr "需要 Domain 認證"
 
-#: diskdrake/smbnfs_gtk.pm:168
+#: diskdrake/smbnfs_gtk.pm:167
 #, c-format
 msgid "Which username"
 msgstr "那個使用者名稱"
 
-#: diskdrake/smbnfs_gtk.pm:168
+#: diskdrake/smbnfs_gtk.pm:167
 #, c-format
 msgid "Another one"
 msgstr "另外一個"
 
-#: diskdrake/smbnfs_gtk.pm:177
+#: diskdrake/smbnfs_gtk.pm:176
 #, c-format
 msgid ""
 "Please enter your username, password and domain name to access this host."
 msgstr "請輸入你的使用者名稱，密碼以及網域名稱，以便於能夠連線存取這個主機。"
 
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
+#: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489
 #, c-format
 msgid "Username"
 msgstr "使用者名稱"
 
-#: diskdrake/smbnfs_gtk.pm:205
+#: diskdrake/smbnfs_gtk.pm:204
 #, c-format
 msgid "Search servers"
 msgstr "搜尋伺服器"
 
-#: diskdrake/smbnfs_gtk.pm:210
+#: diskdrake/smbnfs_gtk.pm:209
 #, c-format
 msgid "Search new servers"
 msgstr "搜尋新的伺服器"
@@ -2915,71 +2919,76 @@ msgstr "正在安裝套件..."
 msgid "Removing packages..."
 msgstr "正在移除套件..."
 
-#: fs.pm:487 fs.pm:536
+#: fs.pm:516
 #, c-format
 msgid "Mounting partition %s"
 msgstr "正在掛載分割區 %s"
 
-#: fs.pm:488 fs.pm:537
+#: fs.pm:517
 #, c-format
 msgid "mounting partition %s in directory %s failed"
 msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗"
 
-#: fs.pm:508 fs.pm:515
+#: fs.pm:522 fs.pm:539
 #, c-format
 msgid "Checking %s"
 msgstr "檢查 %s"
 
-#: fs.pm:553 partition_table.pm:391
+#: fs.pm:555 partition_table.pm:385
 #, c-format
 msgid "error unmounting %s: %s"
 msgstr "卸下 %s 的掛載時發生錯誤：%s"
 
-#: fs.pm:585
+#: fs.pm:587
 #, c-format
 msgid "Enabling swap partition %s"
 msgstr "正在啟用 swap 分割區 %s"
 
-#: fs/format.pm:44 fs/format.pm:51
+#: fs/format.pm:45 fs/format.pm:52
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
 
-#: fs/format.pm:48
+#: fs/format.pm:49
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "建立並格式化檔案 %s"
 
-#: fs/format.pm:83
+#: fs/format.pm:84
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道要如何將 %s 格式化為 %s 格式"
 
-#: fs/format.pm:88 fs/format.pm:90
+#: fs/format.pm:89 fs/format.pm:91
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "以 %s 格式化 %s 失敗"
 
-#: fs/mount_options.pm:112
+#: fs/loopback.pm:30
+#, c-format
+msgid "Circular mounts %s\n"
+msgstr "循環掛載 %s\n"
+
+#: fs/mount_options.pm:113
 #, c-format
 msgid ""
 "Do not update inode access times on this file system\n"
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
-#: fs/mount_options.pm:115
+#: fs/mount_options.pm:116
 #, c-format
 msgid ""
 "Can only be mounted explicitly (i.e.,\n"
 "the -a option will not cause the file system to be mounted)."
 msgstr ""
 
-#: fs/mount_options.pm:118
+#: fs/mount_options.pm:119
 #, c-format
 msgid "Do not interpret character or block special devices on the file system."
 msgstr ""
 
-#: fs/mount_options.pm:120
+#: fs/mount_options.pm:121
 #, c-format
 msgid ""
 "Do not allow execution of any binaries on the mounted\n"
@@ -2987,7 +2996,7 @@ msgid ""
 "containing binaries for architectures other than its own."
 msgstr ""
 
-#: fs/mount_options.pm:124
+#: fs/mount_options.pm:125
 #, c-format
 msgid ""
 "Do not allow set-user-identifier or set-group-identifier\n"
@@ -2995,17 +3004,17 @@ msgid ""
 "have suidperl(1) installed.)"
 msgstr ""
 
-#: fs/mount_options.pm:128
+#: fs/mount_options.pm:129
 #, c-format
 msgid "Mount the file system read-only."
 msgstr "以唯讀方式掛載檔案系統。"
 
-#: fs/mount_options.pm:130
+#: fs/mount_options.pm:131
 #, c-format
 msgid "All I/O to the file system should be done synchronously."
 msgstr ""
 
-#: fs/mount_options.pm:134
+#: fs/mount_options.pm:135
 #, c-format
 msgid ""
 "Allow an ordinary user to mount the file system. The\n"
@@ -3020,12 +3029,12 @@ msgstr ""
 "這個選項套用了 noexec、nosuid 以及 nodev 的參數\n"
 "(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。"
 
-#: fs/mount_options.pm:142
+#: fs/mount_options.pm:143
 #, c-format
 msgid "Give write access to ordinary users"
 msgstr "授予寫入權限給一般使用者"
 
-#: fs/mount_options.pm:144
+#: fs/mount_options.pm:145
 #, c-format
 msgid "Give read-only access to ordinary users"
 msgstr "授予唯讀權限給一般使用者"
@@ -3040,17 +3049,17 @@ msgstr "小於 16MB 的分割區不能使用 JFS 格式"
 msgid "You can not use ReiserFS for partitions smaller than 32MB"
 msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式"
 
-#: fsedit.pm:25
+#: fsedit.pm:27
 #, c-format
 msgid "with /usr"
 msgstr "掛載為 /usr"
 
-#: fsedit.pm:30
+#: fsedit.pm:32
 #, c-format
 msgid "server"
 msgstr "伺服器"
 
-#: fsedit.pm:183
+#: fsedit.pm:185
 #, c-format
 msgid ""
 "I can not read the partition table of device %s, it's too corrupted for me :"
@@ -3062,22 +3071,22 @@ msgid ""
 "Do you agree to lose all the partitions?\n"
 msgstr ""
 
-#: fsedit.pm:400
+#: fsedit.pm:350
 #, c-format
 msgid "Mount points must begin with a leading /"
 msgstr "掛載點必需以 / 開頭"
 
-#: fsedit.pm:401
+#: fsedit.pm:351
 #, c-format
 msgid "Mount points should contain only alphanumerical characters"
 msgstr "掛載點應該只有包含英文字母與數字與底線這類字元"
 
-#: fsedit.pm:402
+#: fsedit.pm:352
 #, c-format
 msgid "There is already a partition with mount point %s\n"
 msgstr "已經有分割區分配到掛載點 %s 了\n"
 
-#: fsedit.pm:404
+#: fsedit.pm:354
 #, c-format
 msgid ""
 "You've selected a software RAID partition as root (/).\n"
@@ -3088,12 +3097,12 @@ msgstr ""
 "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
 "請確定會增加一個 /boot 分割區"
 
-#: fsedit.pm:407
+#: fsedit.pm:357
 #, c-format
 msgid "You can not use a LVM Logical Volume for mount point %s"
 msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點"
 
-#: fsedit.pm:409
+#: fsedit.pm:359
 #, c-format
 msgid ""
 "You've selected a LVM Logical Volume as root (/).\n"
@@ -3104,19 +3113,19 @@ msgstr ""
 "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
 "請確定會增加一個 /boot 分割區"
 
-#: fsedit.pm:412
+#: fsedit.pm:362
 #, c-format
 msgid ""
 "You may not be able to install lilo (since lilo does not handle a LV on "
 "multiple PVs)"
 msgstr ""
 
-#: fsedit.pm:415 fsedit.pm:417
+#: fsedit.pm:365 fsedit.pm:367
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "這個目錄應該放在根檔案系統 (/) 才對"
 
-#: fsedit.pm:419 fsedit.pm:421
+#: fsedit.pm:369 fsedit.pm:371
 #, c-format
 msgid ""
 "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
@@ -3124,22 +3133,22 @@ msgid ""
 msgstr ""
 "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
 
-#: fsedit.pm:423
+#: fsedit.pm:373
 #, c-format
 msgid "You can not use an encrypted file system for mount point %s"
 msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
 
-#: fsedit.pm:484
+#: fsedit.pm:434
 #, c-format
 msgid "Not enough free space for auto-allocating"
 msgstr "沒有足夠的空間來進行自動配置"
 
-#: fsedit.pm:486
+#: fsedit.pm:436
 #, c-format
 msgid "Nothing to do"
 msgstr "沒有做任何動作"
 
-#: harddrake/data.pm:62 install_any.pm:1599
+#: harddrake/data.pm:62 install_any.pm:1633
 #, c-format
 msgid "Floppy"
 msgstr "軟碟片"
@@ -3149,12 +3158,12 @@ msgstr "軟碟片"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88 install_any.pm:1600
+#: harddrake/data.pm:88 install_any.pm:1634
 #, c-format
 msgid "Hard Disk"
 msgstr "硬碟"
 
-#: harddrake/data.pm:97 install_any.pm:1601
+#: harddrake/data.pm:97 install_any.pm:1635
 #, c-format
 msgid "CDROM"
 msgstr "光碟機"
@@ -3169,7 +3178,7 @@ msgstr "CD/DVD 燒錄器"
 msgid "DVD-ROM"
 msgstr "DVD-ROM"
 
-#: harddrake/data.pm:127 standalone/drakbackup:2034
+#: harddrake/data.pm:127 standalone/drakbackup:2036
 #, c-format
 msgid "Tape"
 msgstr "磁帶"
@@ -3244,141 +3253,141 @@ msgstr ""
 msgid "Ethernetcard"
 msgstr "乙太網路介面卡"
 
-#: harddrake/data.pm:283 network/netconnect.pm:573
+#: harddrake/data.pm:282 network/netconnect.pm:481
 #, c-format
 msgid "Modem"
 msgstr "數據機"
 
-#: harddrake/data.pm:293
+#: harddrake/data.pm:292
 #, c-format
 msgid "ADSL adapters"
 msgstr "ADSL 介面卡"
 
-#: harddrake/data.pm:307
+#: harddrake/data.pm:306
 #, c-format
 msgid "Memory"
 msgstr "記憶體"
 
-#: harddrake/data.pm:316
+#: harddrake/data.pm:315
 #, c-format
 msgid "AGP controllers"
 msgstr "AGP 控制器"
 
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
+#: harddrake/data.pm:324 help.pm:186 help.pm:855
 #: install_steps_interactive.pm:984
 #, c-format
 msgid "Printer"
 msgstr "印表機"
 
 #. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
+#: harddrake/data.pm:338
 #, c-format
 msgid "Game port controllers"
 msgstr ""
 
-#: harddrake/data.pm:348
+#: harddrake/data.pm:347
 #, c-format
 msgid "Joystick"
 msgstr "搖桿"
 
-#: harddrake/data.pm:358
+#: harddrake/data.pm:357
 #, c-format
 msgid "SATA controllers"
 msgstr "SATA 控制器"
 
-#: harddrake/data.pm:367
+#: harddrake/data.pm:366
 #, c-format
 msgid "RAID controllers"
 msgstr "RAID 控制器"
 
-#: harddrake/data.pm:376
+#: harddrake/data.pm:375
 #, c-format
 msgid "(E)IDE/ATA controllers"
 msgstr "(E)IDE/ATA 控制器"
 
-#: harddrake/data.pm:385
+#: harddrake/data.pm:384
 #, c-format
 msgid "Firewire controllers"
 msgstr "Firewire 控制器"
 
-#: harddrake/data.pm:394
+#: harddrake/data.pm:393
 #, c-format
 msgid "PCMCIA controllers"
 msgstr "PCMCIA 控制器"
 
-#: harddrake/data.pm:403
+#: harddrake/data.pm:402
 #, c-format
 msgid "SCSI controllers"
 msgstr "SCSI 控制器"
 
-#: harddrake/data.pm:412
+#: harddrake/data.pm:411
 #, c-format
 msgid "USB controllers"
 msgstr "USB 控制器"
 
-#: harddrake/data.pm:421
+#: harddrake/data.pm:420
 #, c-format
 msgid "USB ports"
 msgstr "USB 埠"
 
-#: harddrake/data.pm:430
+#: harddrake/data.pm:429
 #, c-format
 msgid "SMBus controllers"
 msgstr "SMBus 控制器"
 
-#: harddrake/data.pm:439
+#: harddrake/data.pm:438
 #, c-format
 msgid "Bridges and system controllers"
 msgstr "橋樑與系統控制器"
 
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
+#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117
 #: install_steps_interactive.pm:944 standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "鍵盤"
 
-#: harddrake/data.pm:461
+#: harddrake/data.pm:460
 #, c-format
 msgid "Tablet and touchscreen"
 msgstr ""
 
-#: harddrake/data.pm:470 help.pm:855 install_steps_interactive.pm:977
+#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977
 #, c-format
 msgid "Mouse"
 msgstr "滑鼠"
 
-#: harddrake/data.pm:484
+#: harddrake/data.pm:483
 #, c-format
 msgid "UPS"
 msgstr "UPS"
 
-#: harddrake/data.pm:493
+#: harddrake/data.pm:492
 #, c-format
 msgid "Scanner"
 msgstr "掃描器"
 
-#: harddrake/data.pm:503 standalone/harddrake2:440
+#: harddrake/data.pm:502 standalone/harddrake2:441
 #, c-format
 msgid "Unknown/Others"
 msgstr "未知/其他"
 
-#: harddrake/data.pm:531
+#: harddrake/data.pm:530
 #, c-format
 msgid "cpu # "
 msgstr "CPU 編號"
 
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
+#: harddrake/sound.pm:190 standalone/drakconnect:162
+#: standalone/drakconnect:637
 #, c-format
 msgid "Please Wait... Applying the configuration"
 msgstr "請稍待... 正在套用該設定"
 
-#: harddrake/sound.pm:227
+#: harddrake/sound.pm:226
 #, c-format
 msgid "No alternative driver"
 msgstr "無另外可供選擇的驅動程式"
 
-#: harddrake/sound.pm:228
+#: harddrake/sound.pm:227
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
@@ -3387,12 +3396,12 @@ msgstr ""
 "目前沒有另外可供選擇的 OSS/ALSA 驅動程式支援你的音效卡 (%s)\n"
 "正在使用 \"%s\""
 
-#: harddrake/sound.pm:234
+#: harddrake/sound.pm:233
 #, c-format
 msgid "Sound configuration"
 msgstr "音效設定"
 
-#: harddrake/sound.pm:236
+#: harddrake/sound.pm:235
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
@@ -3402,7 +3411,7 @@ msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您�
 #. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
+#: harddrake/sound.pm:240
 #, c-format
 msgid ""
 "\n"
@@ -3414,7 +3423,7 @@ msgstr ""
 "\n"
 "您的卡現在正在使用 %s\"%s\" 驅動程式 (您的卡預設驅動程式為 \"%s\")"
 
-#: harddrake/sound.pm:243
+#: harddrake/sound.pm:242
 #, c-format
 msgid ""
 "OSS (Open Sound System) was the first sound API. It's an OS independent "
@@ -3434,35 +3443,35 @@ msgid ""
 "the ALSA library.\n"
 msgstr ""
 
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
+#: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146
 #, c-format
 msgid "Driver:"
 msgstr "驅動程式："
 
-#: harddrake/sound.pm:262
+#: harddrake/sound.pm:261
 #, c-format
 msgid "Trouble shooting"
 msgstr "疑難排解"
 
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1081
-#: network/ndiswrapper.pm:95 network/netconnect.pm:552
+#: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078
+#: network/ndiswrapper.pm:95 network/netconnect.pm:460
 #: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
 #: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
 #: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
 #: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
+#: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310
+#: standalone/drakTermServ:325 standalone/drakTermServ:1135
+#: standalone/drakTermServ:1196 standalone/drakTermServ:1861
 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
+#: standalone/drakclock:224 standalone/drakconnect:969
+#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:478
 #: standalone/scannerdrake:51 standalone/scannerdrake:940
 #, c-format
 msgid "Warning"
 msgstr "警告"
 
-#: harddrake/sound.pm:270
+#: harddrake/sound.pm:269
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -3472,45 +3481,45 @@ msgid ""
 "The new \"%s\" driver will only be used on next bootstrap."
 msgstr ""
 
-#: harddrake/sound.pm:278
+#: harddrake/sound.pm:277
 #, c-format
 msgid "No open source driver"
 msgstr "無開放原始碼的驅動程式"
 
-#: harddrake/sound.pm:279
+#: harddrake/sound.pm:278
 #, c-format
 msgid ""
 "There's no free driver for your sound card (%s), but there's a proprietary "
 "driver at \"%s\"."
 msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"."
 
-#: harddrake/sound.pm:282
+#: harddrake/sound.pm:281
 #, c-format
 msgid "No known driver"
 msgstr "無已知的驅動程式"
 
-#: harddrake/sound.pm:283
+#: harddrake/sound.pm:282
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)"
 
-#: harddrake/sound.pm:287
+#: harddrake/sound.pm:286
 #, c-format
 msgid "Unknown driver"
 msgstr "未知的驅動程式"
 
-#: harddrake/sound.pm:288
+#: harddrake/sound.pm:287
 #, c-format
 msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr "錯誤：您的音效卡驅動程式 \"%s\" 沒有列出"
 
-#: harddrake/sound.pm:302
+#: harddrake/sound.pm:301
 #, c-format
 msgid "Sound trouble shooting"
 msgstr "音效問題排除"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
+#: harddrake/sound.pm:304
 #, c-format
 msgid ""
 "The classic bug sound tester is to run the following commands:\n"
@@ -3534,18 +3543,18 @@ msgid ""
 "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: harddrake/sound.pm:331
+#: harddrake/sound.pm:330
 #, c-format
 msgid "Let me pick any driver"
 msgstr "讓我選擇任何驅動程式"
 
-#: harddrake/sound.pm:334
+#: harddrake/sound.pm:333
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "正在選擇任意的驅動程式"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
+#: harddrake/sound.pm:336
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3559,28 +3568,28 @@ msgstr ""
 "\n"
 "目前您的音效卡 \"%s\" 使用的驅動程式是 \"%s\"。"
 
-#: harddrake/v4l.pm:14 standalone/net_applet:75 standalone/net_applet:76
-#: standalone/net_applet:78
+#: harddrake/v4l.pm:12 standalone/net_applet:73 standalone/net_applet:74
+#: standalone/net_applet:76
 #, c-format
 msgid "Auto-detect"
 msgstr "自動偵測"
 
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
+#: harddrake/v4l.pm:70 harddrake/v4l.pm:233
 #, c-format
 msgid "Unknown|Generic"
 msgstr "未知|一般"
 
-#: harddrake/v4l.pm:105
+#: harddrake/v4l.pm:103
 #, c-format
 msgid "Unknown|CPH05X (bt878) [many vendors]"
 msgstr "未知|CPH05X (bt878) [許多廠商]"
 
-#: harddrake/v4l.pm:106
+#: harddrake/v4l.pm:104
 #, c-format
 msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr "未知|CPH06X (bt878) [許多廠商]"
 
-#: harddrake/v4l.pm:309
+#: harddrake/v4l.pm:307
 #, c-format
 msgid ""
 "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
@@ -3593,37 +3602,37 @@ msgstr ""
 "若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型"
 "號。若需要的話請直接選擇您的電視卡卡參數。"
 
-#: harddrake/v4l.pm:312
+#: harddrake/v4l.pm:310
 #, c-format
 msgid "Card model:"
 msgstr "卡模組："
 
-#: harddrake/v4l.pm:313
+#: harddrake/v4l.pm:311
 #, c-format
 msgid "Tuner type:"
 msgstr "調頻類型："
 
-#: harddrake/v4l.pm:314
+#: harddrake/v4l.pm:312
 #, c-format
 msgid "Number of capture buffers:"
 msgstr "擷取緩衝的數量："
 
-#: harddrake/v4l.pm:314
+#: harddrake/v4l.pm:312
 #, c-format
 msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
 
-#: harddrake/v4l.pm:316
+#: harddrake/v4l.pm:314
 #, c-format
 msgid "PLL setting:"
 msgstr "PLL 設定："
 
-#: harddrake/v4l.pm:317
+#: harddrake/v4l.pm:315
 #, c-format
 msgid "Radio support:"
 msgstr "音效支援："
 
-#: harddrake/v4l.pm:317
+#: harddrake/v4l.pm:315
 #, c-format
 msgid "enable radio support"
 msgstr "啟用音效支援"
@@ -3640,8 +3649,8 @@ msgstr ""
 "這包含整個 Mandriva Linux 發行版的版權內容。若是您同意裡面的所有條款，\n"
 "請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。"
 
-#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:735 standalone/drakautoinst:216
+#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91
+#: install_steps_interactive.pm:735 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
@@ -3728,15 +3737,20 @@ msgid "User name"
 msgstr "使用者名稱"
 
 #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
-#: install_steps_gtk.pm:694 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:336 network/thirdparty.pm:321
-#: printer/printerdrake.pm:3678 standalone/drakTermServ:383
-#: standalone/drakbackup:3938 standalone/drakbackup:4032
-#: standalone/drakbackup:4049 standalone/drakbackup:4067 ugtk2.pm:506
+#: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321
+#: network/thirdparty.pm:323 printer/printerdrake.pm:3678
+#: standalone/drakTermServ:382 standalone/drakbackup:3940
+#: standalone/drakbackup:4034 standalone/drakbackup:4051
+#: standalone/drakbackup:4069 ugtk2.pm:506
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
+#: help.pm:51
+#, c-format
+msgid "Do you want to use this feature?"
+msgstr "您想要使用這個功能嗎?"
+
 #: help.pm:54
 #, c-format
 msgid ""
@@ -3912,18 +3926,18 @@ msgstr ""
 " * \"%s\"：將安裝絕對最少套件必要於使一個 Linux 系統工作。\n"
 "用這個安裝您將只擁有一個命令列介面. 全部安裝大小大約 65 MB。"
 
-#: help.pm:146 share/compssUsers.pl:23
+#: help.pm:146 share/compssUsers.pl:24
 #, c-format
 msgid "Workstation"
 msgstr "工作站"
 
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
+#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
+#: share/compssUsers.pl:169
 #, c-format
 msgid "Development"
 msgstr "程式開發"
 
-#: help.pm:146 share/compssUsers.pl:144
+#: help.pm:146 share/compssUsers.pl:145
 #, c-format
 msgid "Graphical Environment"
 msgstr "圖形環境"
@@ -3991,6 +4005,22 @@ msgid ""
 "such a floppy."
 msgstr ""
 
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:874
+#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503
+#: standalone/draksec:54 standalone/harddrake2:308 standalone/net_applet:295
+#: ugtk2.pm:907 wizards.pm:156
+#, c-format
+msgid "No"
+msgstr "否"
+
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:874 interactive.pm:157
+#: modules/interactive.pm:71 printer/printerdrake.pm:743
+#: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:307
+#: standalone/net_applet:299 ugtk2.pm:907 wizards.pm:156
+#, c-format
+msgid "Yes"
+msgstr "是的"
+
 #: help.pm:180
 #, c-format
 msgid "Automatic dependencies"
@@ -4006,8 +4036,8 @@ msgid ""
 msgstr ""
 
 #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
+#: standalone/drakbackup:2327 standalone/drakbackup:2331
+#: standalone/drakbackup:2335 standalone/drakbackup:2339
 #, c-format
 msgid "Configure"
 msgstr "設定"
@@ -4428,17 +4458,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "產生自動安裝軟片"
 
-#: help.pm:409 install_steps_interactive.pm:1336
+#: help.pm:409 install_steps_interactive.pm:1330
 #, c-format
 msgid "Replay"
 msgstr "重播"
 
-#: help.pm:409 install_steps_interactive.pm:1336
+#: help.pm:409 install_steps_interactive.pm:1330
 #, c-format
 msgid "Automated"
 msgstr "自動化"
 
-#: help.pm:409 install_steps_interactive.pm:1339
+#: help.pm:409 install_steps_interactive.pm:1333
 #, c-format
 msgid "Save packages selection"
 msgstr "儲存套件選擇"
@@ -4481,11 +4511,11 @@ msgstr ""
 "若您想選擇另一個分割給您的新的 Mandriva Linux 作業系統安裝, 點選了\"%s\".\n"
 "若您想選擇要被檢查磁碟上壞的區塊的分割, 點選.\"%s\"."
 
-#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:434
+#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433
 #: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
+#: standalone/drakTermServ:361 standalone/drakbackup:3900
+#: standalone/drakbackup:3939 standalone/drakbackup:4050
+#: standalone/drakbackup:4065 ugtk2.pm:504
 #, c-format
 msgid "Previous"
 msgstr "上一步"
@@ -4515,7 +4545,7 @@ msgstr ""
 "被選擇的套件, 或 \"%s\" 以中斷放棄."
 
 #: help.pm:444 help.pm:588 install_steps_gtk.pm:387
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
+#: install_steps_interactive.pm:155 standalone/drakbackup:4097
 #, c-format
 msgid "Install"
 msgstr "安裝"
@@ -5281,33 +5311,33 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "圖形介面"
 
-#: help.pm:855 install_any.pm:1622 install_steps_interactive.pm:1062
-#: standalone/drakbackup:2019
+#: help.pm:855 install_any.pm:1656 install_steps_interactive.pm:1062
+#: standalone/drakbackup:2021
 #, c-format
 msgid "Network"
 msgstr "網路"
 
-#: help.pm:855 install_steps_interactive.pm:1077
+#: help.pm:855 install_steps_interactive.pm:1074
 #, c-format
 msgid "Proxies"
 msgstr "代理伺服器"
 
-#: help.pm:855 install_steps_interactive.pm:1088
+#: help.pm:855 install_steps_interactive.pm:1085
 #, c-format
 msgid "Security Level"
 msgstr "安全層級"
 
-#: help.pm:855 install_steps_interactive.pm:1102
+#: help.pm:855 install_steps_interactive.pm:1099
 #, c-format
 msgid "Firewall"
 msgstr "防火牆"
 
-#: help.pm:855 install_steps_interactive.pm:1118
+#: help.pm:855 install_steps_interactive.pm:1115
 #, c-format
 msgid "Bootloader"
 msgstr "開機載入器"
 
-#: help.pm:855 install_steps_interactive.pm:1131 services.pm:193
+#: help.pm:855 install_steps_interactive.pm:1128 services.pm:193
 #, c-format
 msgid "Services"
 msgstr "服務"
@@ -5349,7 +5379,7 @@ msgstr "下一步 ->"
 msgid "<- Previous"
 msgstr "<- 上一步"
 
-#: install2.pm:117
+#: install2.pm:115
 #, c-format
 msgid ""
 "Can not access kernel modules corresponding to your kernel (file %s is "
@@ -5365,13 +5395,13 @@ msgstr ""
 msgid "You must also format %s"
 msgstr "您也必須要格式化 %s"
 
-#: install_any.pm:390
+#: install_any.pm:402
 #, c-format
 msgid "Do you have further supplementary media?"
 msgstr "您還有其他的補充媒介嗎?"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:393
+#: install_any.pm:405
 #, c-format
 msgid ""
 "The following media have been found and will be used during install: %s.\n"
@@ -5384,7 +5414,7 @@ msgstr ""
 "\n"
 "您有補充安裝媒介要設定嗎?"
 
-#: install_any.pm:406 printer/printerdrake.pm:3022
+#: install_any.pm:418 printer/printerdrake.pm:3022
 #: printer/printerdrake.pm:3029 standalone/scannerdrake:182
 #: standalone/scannerdrake:190 standalone/scannerdrake:241
 #: standalone/scannerdrake:248
@@ -5392,49 +5422,49 @@ msgstr ""
 msgid "CD-ROM"
 msgstr "CD-ROM"
 
-#: install_any.pm:406
+#: install_any.pm:418
 #, c-format
 msgid "Network (http)"
 msgstr "網路 (http)"
 
-#: install_any.pm:406
+#: install_any.pm:418
 #, c-format
 msgid "Network (ftp)"
 msgstr "網路 (ftp)"
 
-#: install_any.pm:436
+#: install_any.pm:448
 #, c-format
 msgid "Insert the CD 1 again"
 msgstr "請再次插入光碟 1"
 
-#: install_any.pm:460 standalone/drakbackup:112
+#: install_any.pm:472 standalone/drakbackup:112
 #, c-format
 msgid "No device found"
 msgstr "沒有找到任何裝置"
 
-#: install_any.pm:465
+#: install_any.pm:477
 #, c-format
 msgid "Insert the CD"
 msgstr "請插入光碟"
 
-#: install_any.pm:470
+#: install_any.pm:482
 #, c-format
 msgid "Unable to mount CD-ROM"
 msgstr "無法掛載光碟機"
 
-#: install_any.pm:502 install_any.pm:506
+#: install_any.pm:514 install_any.pm:518
 #, c-format
 msgid "URL of the mirror?"
 msgstr "映像站的 URL？"
 
-#: install_any.pm:539
+#: install_any.pm:551
 #, c-format
 msgid ""
 "Can't find a package list file on this mirror. Make sure the location is "
 "correct."
 msgstr "無法在這個映像站上找到套件列表檔。請確定位址是正確的。"
 
-#: install_any.pm:699
+#: install_any.pm:711
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -5444,13 +5474,13 @@ msgstr ""
 "更換光碟片！\n"
 "請插入標籤為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。"
 
-#: install_any.pm:712
+#: install_any.pm:724
 #, c-format
 msgid "Copying in progress"
 msgstr "複製進行中"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:852
+#: install_any.pm:865
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -5473,7 +5503,7 @@ msgstr ""
 "您確定真的要安裝這些伺服器嗎？\n"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:875
+#: install_any.pm:888
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -5486,22 +5516,22 @@ msgstr ""
 "\n"
 "您確定要移除這些套件嗎？\n"
 
-#: install_any.pm:1309 partition_table.pm:603
+#: install_any.pm:1322 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "讀取檔案 %s 時發生錯誤"
 
-#: install_any.pm:1519
+#: install_any.pm:1553
 #, c-format
 msgid "The following disk(s) were renamed:"
 msgstr "下列磁碟已經改名："
 
-#: install_any.pm:1521
+#: install_any.pm:1555
 #, c-format
 msgid "%s (previously named as %s)"
 msgstr "%s (原本為 %s)"
 
-#: install_any.pm:1559
+#: install_any.pm:1593
 #, c-format
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
@@ -5510,42 +5540,52 @@ msgstr ""
 "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體"
 "以找出問題的原因所在"
 
-#: install_any.pm:1603
+#: install_any.pm:1637
 #, c-format
 msgid "HTTP"
 msgstr "HTTP"
 
-#: install_any.pm:1603
+#: install_any.pm:1637
 #, c-format
 msgid "FTP"
 msgstr "FTP"
 
-#: install_any.pm:1603
+#: install_any.pm:1637
 #, c-format
 msgid "NFS"
 msgstr "NFS"
 
-#: install_any.pm:1626
+#: install_any.pm:1660
 #, c-format
 msgid "Please choose a media"
 msgstr "請選擇一個媒介"
 
-#: install_any.pm:1658
-#, c-format
-msgid "Bad media %s"
-msgstr "損壞的媒介 %s"
-
-#: install_any.pm:1670
+#: install_any.pm:1676
 #, c-format
 msgid "File already exists. Overwrite it?"
 msgstr "檔案已經存在了。要覆蓋它嗎？"
 
-#: install_any.pm:1721
+#: install_any.pm:1680
+#, c-format
+msgid "Permission denied"
+msgstr "權限不足"
+
+#: install_any.pm:1729
+#, fuzzy, c-format
+msgid "Bad NFS name"
+msgstr "名片名稱"
+
+#: install_any.pm:1750
+#, c-format
+msgid "Bad media %s"
+msgstr "損壞的媒介 %s"
+
+#: install_any.pm:1797
 #, c-format
 msgid "Can not make screenshots before partitioning"
 msgstr "在尚未進行分割前無法提供畫面捕捉功能"
 
-#: install_any.pm:1728
+#: install_any.pm:1804
 #, c-format
 msgid "Screenshots will be available after install in %s"
 msgstr "在安裝於 %s 後就能夠提供畫面捕捉功能"
@@ -5591,7 +5631,7 @@ msgstr ""
 "\n"
 "不管如何都要繼續？"
 
-#: install_interactive.pm:70 install_steps.pm:219
+#: install_interactive.pm:70 install_steps.pm:218
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
@@ -6009,12 +6049,12 @@ msgstr ""
 msgid "http://www.mandrivalinux.com/en/errata.php3"
 msgstr "http://www.mandrivalinux.com/en/errata.php3"
 
-#: install_steps.pm:254
+#: install_steps.pm:253
 #, c-format
 msgid "Duplicate mount point %s"
 msgstr "重複的掛載點 %s"
 
-#: install_steps.pm:489
+#: install_steps.pm:469
 #, c-format
 msgid ""
 "Some important packages did not get installed properly.\n"
@@ -6026,7 +6066,7 @@ msgstr ""
 "可能是您的光碟機或者是光碟片有缺陷。\n"
 "請將光碟放在一個已經安裝好的電腦上使用 \"rpm -qpl media/main/*.rpm\" 來檢查\n"
 
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
+#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
 #, c-format
 msgid "Entering step `%s'\n"
 msgstr "進入步驟 `%s'\n"
@@ -6204,7 +6244,7 @@ msgstr "%d 套件"
 msgid "Installing package %s"
 msgstr "正在安裝套件 %s"
 
-#: install_steps_gtk.pm:552 install_steps_interactive.pm:92
+#: install_steps_gtk.pm:552 install_steps_interactive.pm:91
 #: install_steps_interactive.pm:735
 #, c-format
 msgid "Refuse"
@@ -6239,7 +6279,7 @@ msgid "There was an error installing packages:"
 msgstr "安裝套件時發生錯誤："
 
 #: install_steps_gtk.pm:617 install_steps_interactive.pm:926
-#: install_steps_interactive.pm:1078
+#: install_steps_interactive.pm:1075
 #, c-format
 msgid "not configured"
 msgstr "未被設定"
@@ -6270,37 +6310,37 @@ msgstr ""
 msgid "Copy whole CDs"
 msgstr "複製整張光碟"
 
-#: install_steps_interactive.pm:85
+#: install_steps_interactive.pm:84
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: install_steps_interactive.pm:89
+#: install_steps_interactive.pm:88
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: install_steps_interactive.pm:119
+#: install_steps_interactive.pm:118
 #, c-format
 msgid "Please choose your keyboard layout."
 msgstr "請選取鍵盤排列的樣式。"
 
-#: install_steps_interactive.pm:121
+#: install_steps_interactive.pm:120
 #, c-format
 msgid "Here is the full list of available keyboards"
 msgstr "以下是所有可用的的鍵盤"
 
-#: install_steps_interactive.pm:151
+#: install_steps_interactive.pm:150
 #, c-format
 msgid "Install/Upgrade"
 msgstr "安裝/升級"
 
-#: install_steps_interactive.pm:152
+#: install_steps_interactive.pm:151
 #, c-format
 msgid "Is this an install or an upgrade?"
 msgstr "這是安裝或是升級？"
 
-#: install_steps_interactive.pm:158
+#: install_steps_interactive.pm:157
 #, c-format
 msgid "Upgrade %s"
 msgstr "升級 %s"
@@ -6463,8 +6503,8 @@ msgstr ""
 msgid "Load"
 msgstr "負載"
 
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
+#: install_steps_interactive.pm:497 standalone/drakbackup:3918
+#: standalone/drakbackup:3991 standalone/drakroam:210 standalone/logdrake:172
 #, c-format
 msgid "Save"
 msgstr "儲存"
@@ -6610,8 +6650,8 @@ msgstr "總結"
 
 #: install_steps_interactive.pm:943 install_steps_interactive.pm:951
 #: install_steps_interactive.pm:969 install_steps_interactive.pm:976
-#: install_steps_interactive.pm:1130 services.pm:133
-#: standalone/drakbackup:1571
+#: install_steps_interactive.pm:1127 services.pm:133
+#: standalone/drakbackup:1573
 #, c-format
 msgid "System"
 msgstr "系統"
@@ -6655,59 +6695,59 @@ msgstr "沒偵測到任何音效卡. 請在安裝後嘗試 \"harddrake\" 進行�
 msgid "Graphical interface"
 msgstr "圖形介面"
 
-#: install_steps_interactive.pm:1061 install_steps_interactive.pm:1076
+#: install_steps_interactive.pm:1061 install_steps_interactive.pm:1073
 #, c-format
 msgid "Network & Internet"
 msgstr "網路 & 網際網路"
 
-#: install_steps_interactive.pm:1078
+#: install_steps_interactive.pm:1075
 #, c-format
 msgid "configured"
 msgstr "已設定"
 
-#: install_steps_interactive.pm:1087 install_steps_interactive.pm:1101
+#: install_steps_interactive.pm:1084 install_steps_interactive.pm:1098
 #: steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "安全性"
 
-#: install_steps_interactive.pm:1106
+#: install_steps_interactive.pm:1103
 #, c-format
 msgid "activated"
 msgstr "以啟動"
 
-#: install_steps_interactive.pm:1106
+#: install_steps_interactive.pm:1103
 #, c-format
 msgid "disabled"
 msgstr "已停用"
 
-#: install_steps_interactive.pm:1117
+#: install_steps_interactive.pm:1114
 #, c-format
 msgid "Boot"
 msgstr "重新開機"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1121
+#: install_steps_interactive.pm:1118
 #, c-format
 msgid "%s on %s"
 msgstr "%2$s 上的 %1$s"
 
-#: install_steps_interactive.pm:1135 services.pm:175
+#: install_steps_interactive.pm:1132 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "服務: %d 已經啟動 給 %d 註冊的項目"
 
-#: install_steps_interactive.pm:1145
+#: install_steps_interactive.pm:1142
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "您尚未設定 X。您確定您真的要這樣做？"
 
-#: install_steps_interactive.pm:1225
+#: install_steps_interactive.pm:1223
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "正在準備開機載入器..."
 
-#: install_steps_interactive.pm:1235
+#: install_steps_interactive.pm:1233
 #, fuzzy, c-format
 msgid ""
 "You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
@@ -6719,12 +6759,12 @@ msgstr ""
 "這將會導致 yaboot 開機載入器無法正常運作.\n"
 "安裝還是會繼續下去, 不過您將需要使用 bootX 或某些其他方法來開機你的機器."
 
-#: install_steps_interactive.pm:1241
+#: install_steps_interactive.pm:1239
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 嗎?"
 
-#: install_steps_interactive.pm:1244
+#: install_steps_interactive.pm:1242
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -6733,29 +6773,29 @@ msgstr ""
 "安裝 aboot 時發生錯誤,\n"
 "你要冒著可能毀損第一個分割區的危險強迫安裝嗎?"
 
-#: install_steps_interactive.pm:1265
+#: install_steps_interactive.pm:1259
 #, c-format
 msgid ""
 "In this security level, access to the files in the Windows partition is "
 "restricted to the administrator."
 msgstr ""
 
-#: install_steps_interactive.pm:1294 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1288 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "請在 %s 中插入一片空白軟片"
 
-#: install_steps_interactive.pm:1299
+#: install_steps_interactive.pm:1293
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "請插入另一張軟片給驅動磁碟"
 
-#: install_steps_interactive.pm:1301
+#: install_steps_interactive.pm:1295
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "正在製作自動安裝軟片..."
 
-#: install_steps_interactive.pm:1313
+#: install_steps_interactive.pm:1307
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -6766,12 +6806,12 @@ msgstr ""
 "\n"
 "您確定要結束安裝程式?"
 
-#: install_steps_interactive.pm:1329
+#: install_steps_interactive.pm:1323
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "製作自動安裝軟片"
 
-#: install_steps_interactive.pm:1331
+#: install_steps_interactive.pm:1325
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -6797,12 +6837,12 @@ msgid ""
 "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr "  <Tab>/<Alt-Tab> 在元件間移動  | <Space> 選取 | <F12> 下個螢幕 "
 
-#: interactive.pm:193
+#: interactive.pm:192
 #, c-format
 msgid "Choose a file"
 msgstr "選擇一個檔案"
 
-#: interactive.pm:318 interactive/gtk.pm:505 standalone/drakbackup:1512
+#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakbackup:1514
 #: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
 #: standalone/drakvpn:694
@@ -6810,24 +6850,24 @@ msgstr "選擇一個檔案"
 msgid "Add"
 msgstr "增加"
 
-#: interactive.pm:318 interactive/gtk.pm:505
+#: interactive.pm:317 interactive/gtk.pm:505
 #, c-format
 msgid "Modify"
 msgstr "修改"
 
-#: interactive.pm:318 interactive/gtk.pm:505 standalone/drakroam:202
+#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakroam:202
 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
 #: standalone/drakvpn:333 standalone/drakvpn:694
 #, c-format
 msgid "Remove"
 msgstr "移除"
 
-#: interactive.pm:395
+#: interactive.pm:394
 #, c-format
 msgid "Basic"
 msgstr "基本"
 
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
+#: interactive.pm:432 interactive/newt.pm:321 ugtk2.pm:506
 #, c-format
 msgid "Finish"
 msgstr "完成"
@@ -7818,7 +7858,7 @@ msgstr "default:LTR"
 msgid "Andorra"
 msgstr "安道爾"
 
-#: lang.pm:196 network/adsl_consts.pm:933
+#: lang.pm:196 network/adsl_consts.pm:943
 #, c-format
 msgid "United Arab Emirates"
 msgstr "阿拉伯聯合大公國"
@@ -8122,8 +8162,8 @@ msgstr "法羅群島"
 msgid "Gabon"
 msgstr "加彭"
 
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:54
+#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
+#: network/netconnect.pm:46
 #, c-format
 msgid "United Kingdom"
 msgstr "英國"
@@ -8638,7 +8678,7 @@ msgstr "新加坡"
 msgid "Saint Helena"
 msgstr "聖赫勒拿島"
 
-#: lang.pm:385 network/adsl_consts.pm:737
+#: lang.pm:385 network/adsl_consts.pm:747
 #, c-format
 msgid "Slovenia"
 msgstr "斯洛維尼亞"
@@ -8658,7 +8698,7 @@ msgstr "獅子山"
 msgid "San Marino"
 msgstr "聖馬利諾"
 
-#: lang.pm:390
+#: lang.pm:390 network/adsl_consts.pm:737
 #, c-format
 msgid "Senegal"
 msgstr "塞內加爾"
@@ -8733,7 +8773,7 @@ msgstr "東帝汶"
 msgid "Turkmenistan"
 msgstr "土庫曼"
 
-#: lang.pm:406 network/adsl_consts.pm:921
+#: lang.pm:406 network/adsl_consts.pm:931
 #, c-format
 msgid "Tunisia"
 msgstr "突尼西亞"
@@ -8853,33 +8893,28 @@ msgstr "尚比亞"
 msgid "Zimbabwe"
 msgstr "辛巴威"
 
-#: lang.pm:1082
+#: lang.pm:1079
 #, c-format
 msgid "You should install the following packages: %s"
 msgstr "您應該安裝下列套件： %s"
 
 #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1085 standalone/scannerdrake:135
+#: lang.pm:1082 standalone/scannerdrake:135
 #, c-format
 msgid ", "
 msgstr ", "
 
-#: lang.pm:1138
+#: lang.pm:1135
 #, c-format
 msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
 
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "循環掛載 %s\n"
-
 #: lvm.pm:112
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "先移除邏輯 volume\n"
 
-#: modules/interactive.pm:21 standalone/drakconnect:1068
+#: modules/interactive.pm:21 standalone/drakconnect:1028
 #, c-format
 msgid "Parameters"
 msgstr "參數"
@@ -9067,11 +9102,11 @@ msgstr "一般 PS/2 滾輪滑鼠"
 msgid "GlidePoint"
 msgstr "GlidePoint"
 
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:671 network/netconnect.pm:676
-#: network/netconnect.pm:688 network/netconnect.pm:693
-#: network/netconnect.pm:709 network/netconnect.pm:711
+#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
+#: network/modem.pm:73 network/modem.pm:87 network/modem.pm:92
+#: network/modem.pm:125 network/netconnect.pm:578 network/netconnect.pm:583
+#: network/netconnect.pm:595 network/netconnect.pm:600
+#: network/netconnect.pm:616 network/netconnect.pm:618
 #, c-format
 msgid "Automatic"
 msgstr "自動"
@@ -9221,7 +9256,7 @@ msgstr "任何 PS/2 與 USB 滑鼠"
 msgid "Microsoft Xbox Controller S"
 msgstr "Microsoft Explorer"
 
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
+#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1140
 #, c-format
 msgid "none"
 msgstr "無"
@@ -9251,63 +9286,7 @@ msgstr "為了驅動您的滑鼠"
 msgid "MOVE YOUR WHEEL!"
 msgstr "請滾動您的滾輪！"
 
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "使用 PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "使用 PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "使用 DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - 已偵測到"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr ""
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr ""
-
-#: network/adsl.pm:35 network/netconnect.pm:808
-#, c-format
-msgid "Connect to the Internet"
-msgstr "連線到 Internet"
-
-#: network/adsl.pm:36 network/netconnect.pm:809
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"最常連線到 ADSL 的方法就是使用 pppoe.\n"
-"有些連線是使用 PPTP, 有些事使用 DHCP.\n"
-"若是您不清楚的話, 選擇 '使用 PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:813
-#, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL 連線型態:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
+#: network/drakfirewall.pm:12 share/compssUsers.pl:85
 #, c-format
 msgid "Web Server"
 msgstr "Web 伺服器"
@@ -9422,36 +9401,36 @@ msgstr "全部 (沒有 firewall)"
 msgid "Other ports"
 msgstr "其它埠"
 
-#: network/isdn.pm:121 network/netconnect.pm:538 network/netconnect.pm:632
-#: network/netconnect.pm:635 network/netconnect.pm:779
-#: network/netconnect.pm:783
+#: network/isdn.pm:118 network/netconnect.pm:452 network/netconnect.pm:539
+#: network/netconnect.pm:542 network/netconnect.pm:685
+#: network/netconnect.pm:689
 #, c-format
 msgid "Unlisted - edit manually"
 msgstr ""
 
-#: network/isdn.pm:164 network/netconnect.pm:470
+#: network/isdn.pm:161 network/netconnect.pm:384
 #, c-format
 msgid "ISA / PCMCIA"
 msgstr "ISA / PCMCIA"
 
-#: network/isdn.pm:164 network/netconnect.pm:470
+#: network/isdn.pm:161 network/netconnect.pm:384
 #, c-format
 msgid "I do not know"
 msgstr "我不清楚"
 
-#: network/isdn.pm:165 network/netconnect.pm:470
+#: network/isdn.pm:162 network/netconnect.pm:384
 #, c-format
 msgid "PCI"
 msgstr "PCI"
 
-#: network/isdn.pm:166 network/netconnect.pm:470
+#: network/isdn.pm:163 network/netconnect.pm:384
 #, c-format
 msgid "USB"
 msgstr "USB"
 
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:676 network/netconnect.pm:693
-#: network/netconnect.pm:709
+#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
+#: network/netconnect.pm:583 network/netconnect.pm:600
+#: network/netconnect.pm:616
 #, c-format
 msgid "Manual"
 msgstr "手動"
@@ -9466,7 +9445,7 @@ msgstr ""
 msgid "Please select the Windows driver (.inf file)"
 msgstr "請選取 Windows 驅動程式 (.inf 檔)"
 
-#: network/ndiswrapper.pm:41
+#: network/ndiswrapper.pm:42
 #, c-format
 msgid "Unable to install the %s ndiswrapper driver!"
 msgstr ""
@@ -9480,7 +9459,7 @@ msgstr ""
 #, c-format
 msgid ""
 "The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
+"Do you really want to use a ndiswrapper driver?"
 msgstr ""
 
 #: network/ndiswrapper.pm:101
@@ -9488,44 +9467,43 @@ msgstr ""
 msgid "Unable to find the ndiswrapper interface!"
 msgstr ""
 
-#: network/netconnect.pm:92 network/netconnect.pm:574
-#: network/netconnect.pm:581
+#: network/netconnect.pm:69 network/netconnect.pm:482
+#: network/netconnect.pm:489
 #, c-format
 msgid "Manual choice"
 msgstr "手動選擇"
 
-#: network/netconnect.pm:92
+#: network/netconnect.pm:69
 #, c-format
 msgid "Internal ISDN card"
 msgstr "內部 ISDN 卡"
 
-#: network/netconnect.pm:105 printer/printerdrake.pm:1418
-#: standalone/drakups:75
+#: network/netconnect.pm:80 printer/printerdrake.pm:1418 standalone/drakups:75
 #, c-format
 msgid "Manual configuration"
 msgstr "手動組態設定"
 
-#: network/netconnect.pm:106
+#: network/netconnect.pm:81
 #, c-format
 msgid "Automatic IP (BOOTP/DHCP)"
 msgstr "自動 IP (BOOTP/DHCP)"
 
-#: network/netconnect.pm:108
+#: network/netconnect.pm:83
 #, c-format
 msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
 msgstr "自動 IP (BOOTP/DHCP/Zeroconf)"
 
-#: network/netconnect.pm:111
+#: network/netconnect.pm:86
 #, c-format
 msgid "Protocol for the rest of the world"
 msgstr "其他世界的的通訊協定"
 
-#: network/netconnect.pm:113 standalone/drakconnect:574
+#: network/netconnect.pm:88 standalone/drakconnect:563
 #, c-format
 msgid "European protocol (EDSS1)"
 msgstr "歐洲人的通訊協定 (EDSS1)"
 
-#: network/netconnect.pm:114 standalone/drakconnect:575
+#: network/netconnect.pm:89 standalone/drakconnect:564
 #, c-format
 msgid ""
 "Protocol for the rest of the world\n"
@@ -9534,334 +9512,305 @@ msgstr ""
 "其他世界的通訊協定\n"
 "無 D-Channel (leased lines)"
 
-#: network/netconnect.pm:154 network/thirdparty.pm:183
+#: network/netconnect.pm:123 network/thirdparty.pm:185
 #, c-format
 msgid "Alcatel speedtouch USB modem"
 msgstr "Alcatel speedtouch USB 數據機"
 
-#: network/netconnect.pm:155
+#: network/netconnect.pm:124
 #, c-format
 msgid "Sagem USB modem"
 msgstr "Sagem USB 數據機"
 
-#: network/netconnect.pm:156
+#: network/netconnect.pm:125
 #, c-format
 msgid "Bewan modem"
 msgstr "Bewan 數據機"
 
-#: network/netconnect.pm:157
+#: network/netconnect.pm:126
 #, c-format
 msgid "ECI Hi-Focus modem"
 msgstr "ECI Hi-Focus 數據機"
 
-#: network/netconnect.pm:161
+#: network/netconnect.pm:130
 #, c-format
 msgid "Dynamic Host Configuration Protocol (DHCP)"
 msgstr ""
 
-#: network/netconnect.pm:162
+#: network/netconnect.pm:131
 #, c-format
 msgid "Manual TCP/IP configuration"
 msgstr "手動組態設定 TCP/IP"
 
-#: network/netconnect.pm:163
+#: network/netconnect.pm:132
 #, c-format
 msgid "Point to Point Tunneling Protocol (PPTP)"
 msgstr ""
 
-#: network/netconnect.pm:164
+#: network/netconnect.pm:133
 #, c-format
 msgid "PPP over Ethernet (PPPoE)"
 msgstr ""
 
-#: network/netconnect.pm:165
+#: network/netconnect.pm:134
 #, c-format
 msgid "PPP over ATM (PPPoA)"
 msgstr ""
 
-#: network/netconnect.pm:166
+#: network/netconnect.pm:135
 #, c-format
 msgid "DSL over CAPI"
 msgstr ""
 
-#: network/netconnect.pm:170
+#: network/netconnect.pm:139
 #, c-format
 msgid "Bridged Ethernet LLC"
 msgstr ""
 
-#: network/netconnect.pm:171
+#: network/netconnect.pm:140
 #, c-format
 msgid "Bridged Ethernet VC"
 msgstr ""
 
-#: network/netconnect.pm:172
+#: network/netconnect.pm:141
 #, c-format
 msgid "Routed IP LLC"
 msgstr ""
 
-#: network/netconnect.pm:173
+#: network/netconnect.pm:142
 #, c-format
 msgid "Routed IP VC"
 msgstr ""
 
-#: network/netconnect.pm:174
+#: network/netconnect.pm:143
 #, c-format
 msgid "PPPoA LLC"
 msgstr ""
 
-#: network/netconnect.pm:175
+#: network/netconnect.pm:144
 #, c-format
 msgid "PPPoA VC"
 msgstr ""
 
-#: network/netconnect.pm:179 standalone/drakconnect:509
+#: network/netconnect.pm:148 standalone/drakconnect:498
 #, c-format
 msgid "Script-based"
 msgstr "Script-based"
 
-#: network/netconnect.pm:180 standalone/drakconnect:509
+#: network/netconnect.pm:149 standalone/drakconnect:498
 #, c-format
 msgid "PAP"
 msgstr "PAP"
 
-#: network/netconnect.pm:181 standalone/drakconnect:509
+#: network/netconnect.pm:150 standalone/drakconnect:498
 #, c-format
 msgid "Terminal-based"
 msgstr "Terminal-based"
 
-#: network/netconnect.pm:182 standalone/drakconnect:509
+#: network/netconnect.pm:151 standalone/drakconnect:498
 #, c-format
 msgid "CHAP"
 msgstr "CHAP"
 
-#: network/netconnect.pm:183 standalone/drakconnect:509
+#: network/netconnect.pm:152 standalone/drakconnect:498
 #, c-format
 msgid "PAP/CHAP"
 msgstr "PAP/CHAP"
 
-#: network/netconnect.pm:188
+#: network/netconnect.pm:157
 #, c-format
 msgid "Open WEP"
 msgstr ""
 
-#: network/netconnect.pm:189
+#: network/netconnect.pm:158
 #, c-format
 msgid "Restricted WEP"
 msgstr ""
 
-#: network/netconnect.pm:190
+#: network/netconnect.pm:159
 #, c-format
 msgid "WPA Pre-Shared Key"
 msgstr ""
 
-#: network/netconnect.pm:295 standalone/drakconnect:60
+#: network/netconnect.pm:240 standalone/drakconnect:56
 #, c-format
 msgid "Network & Internet Configuration"
 msgstr "網路 & 網際網路設定"
 
-#: network/netconnect.pm:301
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(於 port %s 被偵測到)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:303
-#, c-format
-msgid "(detected %s)"
-msgstr "(偵測到 %s)"
-
-#: network/netconnect.pm:303
-#, c-format
-msgid "(detected)"
-msgstr "(被偵測到)"
-
-#: network/netconnect.pm:305
+#: network/netconnect.pm:246
 #, c-format
 msgid "LAN connection"
 msgstr "區域網路連線"
 
-#: network/netconnect.pm:306 network/netconnect.pm:325
+#: network/netconnect.pm:247 network/netconnect.pm:266
 #, c-format
 msgid "Wireless connection"
 msgstr "無線網路連線"
 
-#: network/netconnect.pm:307
+#: network/netconnect.pm:248
 #, c-format
 msgid "ADSL connection"
 msgstr "ADSL 連線"
 
-#: network/netconnect.pm:308
+#: network/netconnect.pm:249
 #, c-format
 msgid "Cable connection"
 msgstr "Cable 連線"
 
-#: network/netconnect.pm:309
+#: network/netconnect.pm:250
 #, c-format
 msgid "ISDN connection"
 msgstr "ISDN 連線"
 
-#: network/netconnect.pm:310
+#: network/netconnect.pm:251
 #, c-format
 msgid "Modem connection"
 msgstr "Modem 連線"
 
-#: network/netconnect.pm:311
+#: network/netconnect.pm:252
 #, c-format
 msgid "DVB connection"
 msgstr ""
 
-#: network/netconnect.pm:321
+#: network/netconnect.pm:262
 #, c-format
 msgid "Choose the connection you want to configure"
 msgstr "選擇您要設定的連線項目"
 
-#: network/netconnect.pm:335
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"我們現在正要設定 %s 連線.\n"
-"\n"
-"\n"
-"按 \"%s\" 繼續."
-
-#: network/netconnect.pm:343 network/netconnect.pm:860
+#: network/netconnect.pm:277 network/netconnect.pm:764
 #, c-format
 msgid "Connection Configuration"
 msgstr "連線組態設定"
 
-#: network/netconnect.pm:344 network/netconnect.pm:861
+#: network/netconnect.pm:277 network/netconnect.pm:765
 #, c-format
 msgid "Please fill or check the field below"
 msgstr "請您填入或檢查下面欄位"
 
-#: network/netconnect.pm:351 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "卡的 IRQ"
-
-#: network/netconnect.pm:352 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "卡的 mem (DMA)"
-
-#: network/netconnect.pm:353 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "卡的 IO"
-
-#: network/netconnect.pm:354 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "卡的 IO_0"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Card IO_1"
-msgstr "卡的 IO_1"
-
-#: network/netconnect.pm:356
+#: network/netconnect.pm:280
 #, c-format
 msgid "Your personal phone number"
 msgstr "您的個人電話號碼"
 
-#: network/netconnect.pm:357 network/netconnect.pm:864
+#: network/netconnect.pm:281 network/netconnect.pm:768
 #, c-format
 msgid "Provider name (ex provider.net)"
 msgstr "提供者的名稱 (ex provider.net)"
 
-#: network/netconnect.pm:358 standalone/drakconnect:504
+#: network/netconnect.pm:282 standalone/drakconnect:493
 #, c-format
 msgid "Provider phone number"
 msgstr "提供者的電話號碼"
 
-#: network/netconnect.pm:359
+#: network/netconnect.pm:283
 #, c-format
 msgid "Provider DNS 1 (optional)"
 msgstr "提供者 DNS 1 (選擇性輸入)"
 
-#: network/netconnect.pm:360
+#: network/netconnect.pm:284
 #, c-format
 msgid "Provider DNS 2 (optional)"
 msgstr "提供者 DNS 2 (選擇性輸入)"
 
-#: network/netconnect.pm:361 standalone/drakconnect:455
+#: network/netconnect.pm:285 standalone/drakconnect:444
 #, c-format
 msgid "Dialing mode"
 msgstr "撥接的模式"
 
-#: network/netconnect.pm:362 standalone/drakconnect:460
-#: standalone/drakconnect:528
+#: network/netconnect.pm:286 standalone/drakconnect:449
+#: standalone/drakconnect:517
 #, c-format
 msgid "Connection speed"
 msgstr "連線速度"
 
-#: network/netconnect.pm:363 standalone/drakconnect:465
+#: network/netconnect.pm:287 standalone/drakconnect:454
 #, c-format
 msgid "Connection timeout (in sec)"
 msgstr "連線逾時 (以秒為單位)"
 
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:867 standalone/drakconnect:502
+#: network/netconnect.pm:288 network/netconnect.pm:313
+#: network/netconnect.pm:771 standalone/drakconnect:491
 #, c-format
 msgid "Account Login (user name)"
 msgstr "帳號登入 (使用者名稱)"
 
-#: network/netconnect.pm:367 network/netconnect.pm:388
-#: network/netconnect.pm:868 standalone/drakconnect:503
+#: network/netconnect.pm:289 network/netconnect.pm:314
+#: network/netconnect.pm:772 standalone/drakconnect:492
 #, c-format
 msgid "Account Password"
 msgstr "帳號的密碼"
 
-#: network/netconnect.pm:383
+#: network/netconnect.pm:290 standalone/drakconnect:554
+#, c-format
+msgid "Card IRQ"
+msgstr "卡的 IRQ"
+
+#: network/netconnect.pm:291 standalone/drakconnect:555
+#, c-format
+msgid "Card mem (DMA)"
+msgstr "卡的 mem (DMA)"
+
+#: network/netconnect.pm:292 standalone/drakconnect:556
+#, c-format
+msgid "Card IO"
+msgstr "卡的 IO"
+
+#: network/netconnect.pm:293 standalone/drakconnect:557
+#, c-format
+msgid "Card IO_0"
+msgstr "卡的 IO_0"
+
+#: network/netconnect.pm:294
+#, c-format
+msgid "Card IO_1"
+msgstr "卡的 IO_1"
+
+#: network/netconnect.pm:309
 #, c-format
 msgid "Cable: account options"
 msgstr "Cable：帳號選項"
 
-#: network/netconnect.pm:386
+#: network/netconnect.pm:312
 #, c-format
 msgid "Use BPALogin (needed for Telstra)"
 msgstr ""
 
-#: network/netconnect.pm:420 network/netconnect.pm:746
-#: network/netconnect.pm:906 network/netconnect.pm:1210
+#: network/netconnect.pm:337 network/netconnect.pm:652
+#: network/netconnect.pm:803 network/netconnect.pm:1102
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "選取要設定的網路介面："
 
-#: network/netconnect.pm:422 network/netconnect.pm:460
-#: network/netconnect.pm:747 network/netconnect.pm:908 network/shorewall.pm:72
-#: standalone/drakconnect:720 standalone/drakvpn:221
+#: network/netconnect.pm:339 network/netconnect.pm:374
+#: network/netconnect.pm:653 network/netconnect.pm:805 network/shorewall.pm:69
+#: standalone/drakconnect:709 standalone/drakvpn:221
 #, c-format
 msgid "Net Device"
 msgstr "網路裝置"
 
-#: network/netconnect.pm:423 network/netconnect.pm:431
+#: network/netconnect.pm:340 network/netconnect.pm:345
 #, c-format
 msgid "External ISDN modem"
 msgstr "外接式 ISDN 數據機"
 
-#: network/netconnect.pm:459 standalone/harddrake2:215
+#: network/netconnect.pm:373 standalone/harddrake2:216
 #, c-format
 msgid "Select a device!"
 msgstr "選取一個裝置！"
 
-#: network/netconnect.pm:468 network/netconnect.pm:478
-#: network/netconnect.pm:488 network/netconnect.pm:521
-#: network/netconnect.pm:535
+#: network/netconnect.pm:382 network/netconnect.pm:392
+#: network/netconnect.pm:402 network/netconnect.pm:435
+#: network/netconnect.pm:449
 #, c-format
 msgid "ISDN Configuration"
 msgstr "ISDN 設定"
 
-#: network/netconnect.pm:469
+#: network/netconnect.pm:383
 #, c-format
 msgid "What kind of card do you have?"
 msgstr "您有那種的卡？"
 
-#: network/netconnect.pm:479
+#: network/netconnect.pm:393
 #, c-format
 msgid ""
 "\n"
@@ -9875,22 +9824,22 @@ msgstr ""
 "\n"
 "如果您使用的是 PCMCIA 卡，那您必須要知道這張卡的\"irq\" 與 \"io\"值。\n"
 
-#: network/netconnect.pm:483
+#: network/netconnect.pm:397
 #, c-format
 msgid "Continue"
 msgstr "繼續"
 
-#: network/netconnect.pm:483
+#: network/netconnect.pm:397
 #, c-format
 msgid "Abort"
 msgstr "放棄"
 
-#: network/netconnect.pm:489
+#: network/netconnect.pm:403
 #, c-format
 msgid "Which of the following is your ISDN card?"
 msgstr "下列何者是您的 ISDN 卡?"
 
-#: network/netconnect.pm:507
+#: network/netconnect.pm:421
 #, c-format
 msgid ""
 "A CAPI driver is available for this modem. This CAPI driver can offer more "
@@ -9898,25 +9847,25 @@ msgid ""
 "want to use?"
 msgstr ""
 
-#: network/netconnect.pm:509 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
+#: network/netconnect.pm:423 standalone/drakconnect:109 standalone/drakups:251
+#: standalone/harddrake2:133
 #, c-format
 msgid "Driver"
 msgstr "驅動程式"
 
-#: network/netconnect.pm:521
+#: network/netconnect.pm:435
 #, c-format
 msgid "Which protocol do you want to use?"
 msgstr "您要使用那個通訊協定?"
 
-#: network/netconnect.pm:523 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
+#: network/netconnect.pm:437 standalone/drakconnect:109
+#: standalone/drakconnect:300 standalone/drakconnect:562
 #: standalone/drakvpn:1142
 #, c-format
 msgid "Protocol"
 msgstr "通訊協定"
 
-#: network/netconnect.pm:535
+#: network/netconnect.pm:449
 #, c-format
 msgid ""
 "Select your provider.\n"
@@ -9925,13 +9874,13 @@ msgstr ""
 "選擇您的提供者.\n"
 "如果並沒有包含在清單內, 請選則未列在清單內(Unlisted)."
 
-#: network/netconnect.pm:537 network/netconnect.pm:631
-#: network/netconnect.pm:778
+#: network/netconnect.pm:451 network/netconnect.pm:538
+#: network/netconnect.pm:684
 #, c-format
 msgid "Provider:"
 msgstr "提供者:"
 
-#: network/netconnect.pm:552
+#: network/netconnect.pm:460
 #, c-format
 msgid ""
 "Your modem is not supported by the system.\n"
@@ -9940,176 +9889,188 @@ msgstr ""
 "系統不支援您的數據機。\n"
 "請到 http://www.linmodems.org 查詢。"
 
-#: network/netconnect.pm:571
+#: network/netconnect.pm:479
 #, c-format
 msgid "Select the modem to configure:"
 msgstr "選取要設定的數據機:"
 
-#: network/netconnect.pm:599
+#: network/netconnect.pm:507
 #, c-format
 msgid "Please choose which serial port your modem is connected to."
 msgstr "請選取您數據機連接的序列埠."
 
-#: network/netconnect.pm:629
+#: network/netconnect.pm:536
 #, c-format
 msgid "Select your provider:"
 msgstr "選擇您的提供者:"
 
-#: network/netconnect.pm:653
+#: network/netconnect.pm:560
 #, c-format
 msgid "Dialup: account options"
 msgstr "撥號: 帳號選項"
 
-#: network/netconnect.pm:656
+#: network/netconnect.pm:563
 #, c-format
 msgid "Connection name"
 msgstr "連線名稱"
 
-#: network/netconnect.pm:657
+#: network/netconnect.pm:564
 #, c-format
 msgid "Phone number"
 msgstr "電話號碼"
 
-#: network/netconnect.pm:658
+#: network/netconnect.pm:565
 #, c-format
 msgid "Login ID"
 msgstr "登入的 ID"
 
-#: network/netconnect.pm:673 network/netconnect.pm:706
+#: network/netconnect.pm:580 network/netconnect.pm:613
 #, c-format
 msgid "Dialup: IP parameters"
 msgstr "撥號: IP 參數"
 
-#: network/netconnect.pm:676
+#: network/netconnect.pm:583
 #, c-format
 msgid "IP parameters"
 msgstr "IP 參數"
 
-#: network/netconnect.pm:677 network/netconnect.pm:996
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
+#: network/netconnect.pm:584 network/netconnect.pm:891
+#: printer/printerdrake.pm:460 standalone/drakconnect:109
+#: standalone/drakconnect:316 standalone/drakconnect:878
 #: standalone/drakups:286
 #, c-format
 msgid "IP address"
 msgstr "IP 位址"
 
-#: network/netconnect.pm:678
+#: network/netconnect.pm:585
 #, c-format
 msgid "Subnet mask"
 msgstr "子網路遮罩"
 
-#: network/netconnect.pm:690
+#: network/netconnect.pm:597
 #, c-format
 msgid "Dialup: DNS parameters"
 msgstr "撥號：DNS 參數"
 
-#: network/netconnect.pm:693
+#: network/netconnect.pm:600
 #, c-format
 msgid "DNS"
 msgstr "DNS"
 
-#: network/netconnect.pm:694
+#: network/netconnect.pm:601
 #, c-format
 msgid "Domain name"
 msgstr "網域名稱"
 
-#: network/netconnect.pm:695 network/netconnect.pm:865
-#: standalone/drakconnect:1033
+#: network/netconnect.pm:602 network/netconnect.pm:769
+#: standalone/drakconnect:993
 #, c-format
 msgid "First DNS Server (optional)"
 msgstr "第一台 DNS 伺服器 (選擇性輸入)"
 
-#: network/netconnect.pm:696 network/netconnect.pm:866
-#: standalone/drakconnect:1034
+#: network/netconnect.pm:603 network/netconnect.pm:770
+#: standalone/drakconnect:994
 #, c-format
 msgid "Second DNS Server (optional)"
 msgstr "第二台 DNS 伺服器 (選擇性輸入)"
 
-#: network/netconnect.pm:697
+#: network/netconnect.pm:604
 #, c-format
 msgid "Set hostname from IP"
 msgstr "由 IP 設定主機名稱"
 
-#: network/netconnect.pm:709 standalone/drakconnect:338
+#: network/netconnect.pm:616 standalone/drakconnect:327
 #, c-format
 msgid "Gateway"
 msgstr "閘道"
 
-#: network/netconnect.pm:710
+#: network/netconnect.pm:617
 #, c-format
 msgid "Gateway IP address"
 msgstr "閘道 IP 位址"
 
-#: network/netconnect.pm:746
+#: network/netconnect.pm:652
 #, c-format
 msgid "ADSL configuration"
 msgstr "ADSL 設定"
 
-#: network/netconnect.pm:776
+#: network/netconnect.pm:682
 #, c-format
 msgid "Please choose your ADSL provider"
 msgstr "請選擇您的 ADSL 提供者"
 
-#: network/netconnect.pm:870
+#: network/netconnect.pm:712
+#, c-format
+msgid "Connect to the Internet"
+msgstr "連線到 Internet"
+
+#: network/netconnect.pm:713
+#, c-format
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use PPTP, a few use DHCP.\n"
+"If you do not know, choose 'use PPPoE'"
+msgstr ""
+"最常連線到 ADSL 的方法就是使用 pppoe.\n"
+"有些連線是使用 PPTP, 有些事使用 DHCP.\n"
+"若是您不清楚的話, 選擇 '使用 PPPoE'"
+
+#: network/netconnect.pm:717
+#, c-format
+msgid "ADSL connection type:"
+msgstr "ADSL 連線型態:"
+
+#: network/netconnect.pm:774
 #, c-format
 msgid "Virtual Path ID (VPI):"
 msgstr ""
 
-#: network/netconnect.pm:871
+#: network/netconnect.pm:775
 #, c-format
 msgid "Virtual Circuit ID (VCI):"
 msgstr ""
 
-#: network/netconnect.pm:874
+#: network/netconnect.pm:778
 #, c-format
 msgid "Encapsulation:"
 msgstr "封裝:"
 
-#: network/netconnect.pm:896 network/thirdparty.pm:204
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:908
+#: network/netconnect.pm:805
 #, c-format
 msgid "Manually load a driver"
 msgstr "手動載入驅動程式"
 
-#: network/netconnect.pm:908
+#: network/netconnect.pm:805
 #, c-format
 msgid "Use a Windows driver (with ndiswrapper)"
 msgstr "使用 Windows 驅動程式 (藉由 ndiswrapper)"
 
-#: network/netconnect.pm:915 network/netconnect.pm:1174
-#: network/netconnect.pm:1178 printer/printerdrake.pm:3741
-#: standalone/drakgw:220 standalone/drakgw:261 standalone/drakgw:295
-#: standalone/drakgw:400
+#: network/netconnect.pm:812 network/netconnect.pm:1066
+#: network/netconnect.pm:1070 printer/printerdrake.pm:3741
+#: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292
+#: standalone/drakgw:397
 #, c-format
 msgid "Could not install the %s package!"
 msgstr "無法安裝 %s 套件！"
 
-#: network/netconnect.pm:950
+#: network/netconnect.pm:847
 #, c-format
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf 主機名稱解析"
 
-#: network/netconnect.pm:951 network/netconnect.pm:983
+#: network/netconnect.pm:848 network/netconnect.pm:878
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "正在設定網路裝置 %s (驅動程式 %s)"
 
-#: network/netconnect.pm:952
+#: network/netconnect.pm:849
 #, c-format
 msgid ""
 "The following protocols can be used to configure a LAN connection. Please "
 "choose the one you want to use"
 msgstr ""
 
-#: network/netconnect.pm:984
+#: network/netconnect.pm:879
 #, c-format
 msgid ""
 "Please enter the IP configuration for this machine.\n"
@@ -10120,186 +10081,186 @@ msgstr ""
 "每個項目都應該用小數點間隔的 IP 位址來輸入\n"
 "(例如 1.2.3.4)。"
 
-#: network/netconnect.pm:991 standalone/drakconnect:384
+#: network/netconnect.pm:886 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "由 DHCP 位址指派主機名稱"
 
-#: network/netconnect.pm:992 standalone/drakconnect:386
+#: network/netconnect.pm:887 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP 主機名稱"
 
-#: network/netconnect.pm:997 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:184
+#: network/netconnect.pm:892 standalone/drakconnect:321
+#: standalone/drakconnect:879 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "網路遮罩"
 
-#: network/netconnect.pm:999 standalone/drakconnect:448
+#: network/netconnect.pm:894 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "紀錄網路卡的 ID (對於筆記型電腦相當有用)"
 
-#: network/netconnect.pm:1001 standalone/drakconnect:449
+#: network/netconnect.pm:896 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "網路熱插拔"
 
-#: network/netconnect.pm:1003 standalone/drakconnect:443
+#: network/netconnect.pm:898 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "於開機時啟動"
 
-#: network/netconnect.pm:1005 standalone/drakconnect:471
+#: network/netconnect.pm:900 standalone/drakconnect:460
 #, fuzzy, c-format
 msgid "Metric"
 msgstr "限制"
 
-#: network/netconnect.pm:1007 standalone/drakconnect:380
-#: standalone/drakconnect:919
+#: network/netconnect.pm:902 standalone/drakconnect:369
+#: standalone/drakconnect:882
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP 用戶端"
 
-#: network/netconnect.pm:1009 standalone/drakconnect:390
+#: network/netconnect.pm:904 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP 連線逾時 (以秒為單位)"
 
-#: network/netconnect.pm:1010 standalone/drakconnect:393
+#: network/netconnect.pm:905 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "由 DHCP 取得 DNS 主機"
 
-#: network/netconnect.pm:1011 standalone/drakconnect:394
+#: network/netconnect.pm:906 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "由 DHCP 取得 YP 伺服器"
 
-#: network/netconnect.pm:1012 standalone/drakconnect:395
+#: network/netconnect.pm:907 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "由 DHCP 取得 NTPD 伺服器"
 
-#: network/netconnect.pm:1021 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
+#: network/netconnect.pm:915 printer/printerdrake.pm:1672
+#: standalone/drakconnect:672
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 位址應該是 1.2.3.4 這類的格式"
 
-#: network/netconnect.pm:1025 standalone/drakconnect:687
+#: network/netconnect.pm:919 standalone/drakconnect:676
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "網路遮罩應該是 255.255.224.0 這類的格式"
 
-#: network/netconnect.pm:1029
+#: network/netconnect.pm:923
 #, c-format
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "警告：IP 位址 %s 通常是保留下來的！"
 
-#: network/netconnect.pm:1034 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
+#: network/netconnect.pm:928 standalone/drakTermServ:1782
+#: standalone/drakTermServ:1783 standalone/drakTermServ:1784
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s 已經在使用中了\n"
 
-#: network/netconnect.pm:1067
+#: network/netconnect.pm:961
 #, c-format
 msgid "Choose an ndiswrapper driver"
 msgstr "選擇一個 ndiswrapper 驅動程式"
 
-#: network/netconnect.pm:1069
+#: network/netconnect.pm:963
 #, c-format
 msgid "Use the ndiswrapper driver %s"
 msgstr ""
 
-#: network/netconnect.pm:1069
+#: network/netconnect.pm:963
 #, c-format
 msgid "Install a new driver"
 msgstr "安裝一個新的驅動程式"
 
-#: network/netconnect.pm:1081
+#: network/netconnect.pm:975
 #, c-format
 msgid "Select a device:"
 msgstr ""
 
-#: network/netconnect.pm:1108
+#: network/netconnect.pm:1000
 #, c-format
 msgid "Please enter the wireless parameters for this card:"
 msgstr "請輸入這張卡的無線網路參數："
 
-#: network/netconnect.pm:1111 standalone/drakconnect:415
+#: network/netconnect.pm:1003 standalone/drakconnect:404
 #, c-format
 msgid "Operating Mode"
 msgstr "運作模式"
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Ad-hoc"
 msgstr ""
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Managed"
 msgstr ""
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Master"
 msgstr ""
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Repeater"
 msgstr "重複器"
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Secondary"
 msgstr "第二的"
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1004
 #, c-format
 msgid "Auto"
 msgstr "自動"
 
-#: network/netconnect.pm:1114 standalone/drakconnect:416
+#: network/netconnect.pm:1006 standalone/drakconnect:405
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "網路名稱 (ESSID)"
 
-#: network/netconnect.pm:1115 standalone/drakconnect:417
+#: network/netconnect.pm:1007 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "網路 ID"
 
-#: network/netconnect.pm:1116 standalone/drakconnect:418
+#: network/netconnect.pm:1008 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "工作頻率"
 
-#: network/netconnect.pm:1117 standalone/drakconnect:419
+#: network/netconnect.pm:1009 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr ""
 
-#: network/netconnect.pm:1118 standalone/drakconnect:420
+#: network/netconnect.pm:1010 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "連線速率 (b/s)"
 
-#: network/netconnect.pm:1119
+#: network/netconnect.pm:1011
 #, c-format
 msgid "Encryption mode"
 msgstr ""
 
-#: network/netconnect.pm:1123 standalone/drakconnect:431
+#: network/netconnect.pm:1015 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr ""
 
-#: network/netconnect.pm:1124
+#: network/netconnect.pm:1016
 #, c-format
 msgid ""
 "RTS/CTS adds a handshake before each packet transmission to make sure that "
@@ -10313,17 +10274,17 @@ msgid ""
 "or off."
 msgstr ""
 
-#: network/netconnect.pm:1131 standalone/drakconnect:432
+#: network/netconnect.pm:1023 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "破碎片段"
 
-#: network/netconnect.pm:1132 standalone/drakconnect:433
+#: network/netconnect.pm:1024 standalone/drakconnect:422
 #, c-format
 msgid "Iwconfig command extra arguments"
 msgstr ""
 
-#: network/netconnect.pm:1133
+#: network/netconnect.pm:1025
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
@@ -10334,12 +10295,12 @@ msgid ""
 msgstr ""
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1140 standalone/drakconnect:434
+#: network/netconnect.pm:1032 standalone/drakconnect:423
 #, c-format
 msgid "Iwspy command extra arguments"
 msgstr ""
 
-#: network/netconnect.pm:1141
+#: network/netconnect.pm:1033
 #, c-format
 msgid ""
 "Iwspy is used to set a list of addresses in a wireless network\n"
@@ -10351,12 +10312,12 @@ msgid ""
 "See iwpspy(8) man page for further information."
 msgstr ""
 
-#: network/netconnect.pm:1150 standalone/drakconnect:435
+#: network/netconnect.pm:1042 standalone/drakconnect:424
 #, c-format
 msgid "Iwpriv command extra arguments"
 msgstr ""
 
-#: network/netconnect.pm:1151
+#: network/netconnect.pm:1043
 #, c-format
 msgid ""
 "Iwpriv enable to set up optionals (private) parameters of a wireless "
@@ -10374,51 +10335,51 @@ msgid ""
 "See iwpriv(8) man page for further information."
 msgstr ""
 
-#: network/netconnect.pm:1166
+#: network/netconnect.pm:1058
 #, c-format
 msgid ""
 "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
 "frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: network/netconnect.pm:1170
+#: network/netconnect.pm:1062
 #, c-format
 msgid ""
 "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
 "enough '0' (zeroes)."
 msgstr ""
 
-#: network/netconnect.pm:1210
+#: network/netconnect.pm:1102
 #, c-format
 msgid "DVB configuration"
 msgstr ""
 
-#: network/netconnect.pm:1211
+#: network/netconnect.pm:1103
 #, c-format
 msgid "DVB Adapter"
 msgstr ""
 
-#: network/netconnect.pm:1229
+#: network/netconnect.pm:1120
 #, c-format
 msgid "DVB adapter settings"
 msgstr ""
 
-#: network/netconnect.pm:1232
+#: network/netconnect.pm:1123
 #, c-format
 msgid "Adapter card"
 msgstr ""
 
-#: network/netconnect.pm:1233
+#: network/netconnect.pm:1124
 #, c-format
 msgid "Net demux"
 msgstr ""
 
-#: network/netconnect.pm:1234
+#: network/netconnect.pm:1125
 #, c-format
 msgid "PID"
-msgstr ""
+msgstr "PID (行程編號)"
 
-#: network/netconnect.pm:1262
+#: network/netconnect.pm:1153
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -10431,67 +10392,67 @@ msgstr ""
 "類似 ``mybox.mylab.myco.com'' 的格式.\n"
 "使用閘道器的話, 也請在這邊輸入閘道器的 IP 位址."
 
-#: network/netconnect.pm:1267
+#: network/netconnect.pm:1158
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr ""
 
-#: network/netconnect.pm:1269 standalone/drakconnect:1032
+#: network/netconnect.pm:1160 standalone/drakconnect:992
 #, c-format
 msgid "Host name (optional)"
 msgstr "主機名稱 (選擇性輸入)"
 
-#: network/netconnect.pm:1269
+#: network/netconnect.pm:1160
 #, c-format
 msgid "Host name"
 msgstr "主機名稱"
 
-#: network/netconnect.pm:1271
+#: network/netconnect.pm:1162
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS 伺服器 1"
 
-#: network/netconnect.pm:1272
+#: network/netconnect.pm:1163
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS 伺服器 2"
 
-#: network/netconnect.pm:1273
+#: network/netconnect.pm:1164
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS 伺服器 3"
 
-#: network/netconnect.pm:1274
+#: network/netconnect.pm:1165
 #, c-format
 msgid "Search domain"
 msgstr "搜尋網域"
 
-#: network/netconnect.pm:1275
+#: network/netconnect.pm:1166
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr ""
 
-#: network/netconnect.pm:1276
+#: network/netconnect.pm:1167
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "閘道器 (比方 %s)"
 
-#: network/netconnect.pm:1278
+#: network/netconnect.pm:1169
 #, c-format
 msgid "Gateway device"
 msgstr "閘道器裝置"
 
-#: network/netconnect.pm:1287
+#: network/netconnect.pm:1178
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "DNS 伺服器位址必須要用 1.2.3.4 的格式來輸入"
 
-#: network/netconnect.pm:1292 standalone/drakconnect:692
+#: network/netconnect.pm:1183 standalone/drakconnect:681
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "Gateway 位址必須要用類似 1.2.3.4 的格式來輸入"
 
-#: network/netconnect.pm:1305
+#: network/netconnect.pm:1196
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -10500,109 +10461,67 @@ msgid ""
 "It is not necessary on most networks."
 msgstr ""
 
-#: network/netconnect.pm:1309
+#: network/netconnect.pm:1200
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf 主機名稱"
 
-#: network/netconnect.pm:1312
+#: network/netconnect.pm:1203
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
-#: network/netconnect.pm:1322
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"您已經選擇設定多個能夠連線到 Internet 的方式.\n"
-"請您選擇其中一個要使用的項目.\n"
-"\n"
-
-#: network/netconnect.pm:1324
-#, c-format
-msgid "Internet connection"
-msgstr "Internet 連線"
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "設定完成, 您想要套用設定值?"
-
-#: network/netconnect.pm:1340
+#: network/netconnect.pm:1213
 #, fuzzy, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "您要在開機時自動啟動該連線嗎?"
 
-#: network/netconnect.pm:1360
+#: network/netconnect.pm:1226
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "您要在開機時自動啟動該連線嗎?"
 
-#: network/netconnect.pm:1379
+#: network/netconnect.pm:1241
 #, c-format
 msgid "Automatically at boot"
 msgstr "自動於開機時"
 
-#: network/netconnect.pm:1381
+#: network/netconnect.pm:1243
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr ""
 
-#: network/netconnect.pm:1383
+#: network/netconnect.pm:1245
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr ""
 
-#: network/netconnect.pm:1392
+#: network/netconnect.pm:1254
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "您想要如何撥接這個連線?"
 
-#: network/netconnect.pm:1406
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?"
-
-#: network/netconnect.pm:1413 network/netconnect.pm:1484
-#, c-format
-msgid "Network Configuration"
-msgstr "網路設定"
-
-#: network/netconnect.pm:1414
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"重新啟動網路時發生了一個問題:\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1423
+#: network/netconnect.pm:1267
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "現在您想要試著連線到 Internet 上面嗎?"
 
-#: network/netconnect.pm:1431 standalone/drakconnect:1064
+#: network/netconnect.pm:1275 standalone/drakconnect:1024
 #, c-format
 msgid "Testing your connection..."
 msgstr "正在測試您的連線..."
 
-#: network/netconnect.pm:1451
+#: network/netconnect.pm:1295
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "系統現在連上 Internet 了."
 
-#: network/netconnect.pm:1452
+#: network/netconnect.pm:1296
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "因為安全因素考量, 它現在將會被切斷連線."
 
-#: network/netconnect.pm:1453
+#: network/netconnect.pm:1297
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -10611,7 +10530,7 @@ msgstr ""
 "系統目前看起來似乎並沒有連上 Internet.\n"
 "請嘗試重新設定您的連線."
 
-#: network/netconnect.pm:1468
+#: network/netconnect.pm:1312
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -10620,7 +10539,7 @@ msgstr ""
 "恭喜！網路與網際網路組態已經設定完成了。\n"
 "\n"
 
-#: network/netconnect.pm:1471
+#: network/netconnect.pm:1315
 #, c-format
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
@@ -10629,7 +10548,7 @@ msgstr ""
 "在完成這個項目後, 我們建議您重新啟動您的 X 環境\n"
 "以避免因為您調整了主機名稱造成 X 的問題."
 
-#: network/netconnect.pm:1472
+#: network/netconnect.pm:1316
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
@@ -10640,7 +10559,28 @@ msgstr ""
 "以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或"
 "許需要重新再進行設定."
 
-#: network/netconnect.pm:1485
+#: network/netconnect.pm:1327
+#, c-format
+msgid "(detected on port %s)"
+msgstr "(於 port %s 被偵測到)"
+
+#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
+#: network/netconnect.pm:1329
+#, c-format
+msgid "(detected %s)"
+msgstr "(偵測到 %s)"
+
+#: network/netconnect.pm:1329
+#, c-format
+msgid "(detected)"
+msgstr "(被偵測到)"
+
+#: network/netconnect.pm:1330
+#, c-format
+msgid "Network Configuration"
+msgstr "網路設定"
+
+#: network/netconnect.pm:1331
 #, c-format
 msgid ""
 "Because you are doing a network installation, your network is already "
@@ -10652,7 +10592,57 @@ msgstr ""
 "您可以點選確定 Ok 保留您的設定組態, 或者是選取取消 cancel\n"
 "來重新設定網路 & 網際網路連線.\n"
 
-#: network/netconnect.pm:1523
+#: network/netconnect.pm:1334
+#, c-format
+msgid "The network needs to be restarted. Do you want to restart it?"
+msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?"
+
+#: network/netconnect.pm:1335
+#, c-format
+msgid ""
+"A problem occurred while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"重新啟動網路時發生了一個問題:\n"
+"\n"
+"%s"
+
+#: network/netconnect.pm:1336
+#, c-format
+msgid ""
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press \"%s\" to continue."
+msgstr ""
+"我們現在正要設定 %s 連線.\n"
+"\n"
+"\n"
+"按 \"%s\" 繼續."
+
+#: network/netconnect.pm:1337
+#, c-format
+msgid "Configuration is complete, do you want to apply settings?"
+msgstr "設定完成, 您想要套用設定值?"
+
+#: network/netconnect.pm:1338
+#, c-format
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"您已經選擇設定多個能夠連線到 Internet 的方式.\n"
+"請您選擇其中一個要使用的項目.\n"
+"\n"
+
+#: network/netconnect.pm:1339
+#, c-format
+msgid "Internet connection"
+msgstr "Internet 連線"
+
+#: network/netconnect.pm:1356
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -10661,32 +10651,32 @@ msgstr ""
 "發生了一個沒有預料到的錯誤：\n"
 "%s"
 
-#: network/network.pm:337
+#: network/network.pm:390
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理伺服器設定"
 
-#: network/network.pm:338
+#: network/network.pm:391
 #, c-format
 msgid "HTTP proxy"
 msgstr "HTTP 代理伺服器"
 
-#: network/network.pm:339
+#: network/network.pm:392
 #, c-format
 msgid "FTP proxy"
 msgstr "FTP 代理伺服器"
 
-#: network/network.pm:342
+#: network/network.pm:395
 #, c-format
 msgid "Proxy should be http://..."
 msgstr "代理伺服器的設定格式必須為 http://..."
 
-#: network/network.pm:343
+#: network/network.pm:396
 #, c-format
 msgid "URL should begin with 'ftp:' or 'http:'"
 msgstr "URL 應該是以 'ftp:' 或 'http:' 開頭"
 
-#: network/shorewall.pm:57 standalone/drakvpn:214
+#: network/shorewall.pm:54 standalone/drakvpn:214
 #, c-format
 msgid ""
 "Please enter the name of the interface connected to the internet.\n"
@@ -10697,7 +10687,7 @@ msgid ""
 "\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: network/thirdparty.pm:195
+#: network/thirdparty.pm:197
 #, fuzzy, c-format
 msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
 msgstr ""
@@ -10706,58 +10696,67 @@ msgstr ""
 "%s\n"
 "並複製檔案 mgmt.o 到 /usr/share/speedtouch"
 
-#: network/thirdparty.pm:265
+#: network/thirdparty.pm:206
+#, c-format
+msgid ""
+"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
+"problem.\n"
+"\n"
+"You can find a driver on http://eciadsl.flashtux.org/"
+msgstr ""
+
+#: network/thirdparty.pm:267
 #, fuzzy, c-format
 msgid "Could not install the packages (%s)!"
 msgstr "無法安裝 %s 套件！"
 
-#: network/thirdparty.pm:273
+#: network/thirdparty.pm:275
 #, c-format
 msgid "Some packages (%s) are required but aren't available."
 msgstr ""
 
-#: network/thirdparty.pm:274
+#: network/thirdparty.pm:276
 #, c-format
 msgid ""
 "These packages can be found in Mandriva Club or in Mandriva commercial "
 "releases."
 msgstr ""
 
-#: network/thirdparty.pm:275
+#: network/thirdparty.pm:277
 #, c-format
 msgid ""
 "The required files can also be installed from this URL:\n"
 "%s"
 msgstr ""
 
-#: network/thirdparty.pm:308
+#: network/thirdparty.pm:310
 #, fuzzy, c-format
 msgid "Unable to find \"%s\" on your Windows system!"
 msgstr "由您的系統移除該字體檔案"
 
-#: network/thirdparty.pm:310
+#: network/thirdparty.pm:312
 #, c-format
 msgid "No Windows system has been detected!"
 msgstr ""
 
-#: network/thirdparty.pm:320
+#: network/thirdparty.pm:322
 #, c-format
 msgid "Insert floppy"
 msgstr "插入軟片"
 
-#: network/thirdparty.pm:321
+#: network/thirdparty.pm:323
 #, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
 "press %s"
 msgstr "插入一張 FAT 格式化的軟片於磁碟 %s 跟著 %s 於 root 目錄下然後按下 %s"
 
-#: network/thirdparty.pm:331
+#: network/thirdparty.pm:333
 #, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "軟片存取錯誤, 無法掛載裝置 %s"
 
-#: network/thirdparty.pm:341
+#: network/thirdparty.pm:343
 #, c-format
 msgid ""
 "You need the Alcatel microcode.\n"
@@ -10767,53 +10766,53 @@ msgstr ""
 "您需要 Alcatel 的微碼。\n"
 "您可以立即由磁碟片或 Windows 磁區安裝，或者先跳過等日後再執行。"
 
-#: network/thirdparty.pm:345 network/thirdparty.pm:347
+#: network/thirdparty.pm:347 network/thirdparty.pm:349
 #, c-format
 msgid "Use a floppy"
 msgstr "由磁片安裝"
 
-#: network/thirdparty.pm:345
+#: network/thirdparty.pm:347
 #, c-format
 msgid "Use my Windows partition"
 msgstr "由我的 Windows 磁區安裝"
 
-#: network/thirdparty.pm:355
+#: network/thirdparty.pm:357
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr "韌體複製失敗，找不到檔案 %s"
 
-#: network/thirdparty.pm:360 standalone/drakautoinst:252
+#: network/thirdparty.pm:362 standalone/drakautoinst:250
 #: standalone/drakvpn:902 standalone/scannerdrake:405
 #, c-format
 msgid "Congratulations!"
 msgstr "恭喜!!"
 
-#: network/thirdparty.pm:360
+#: network/thirdparty.pm:362
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr "韌體複製成功"
 
-#: network/thirdparty.pm:425
+#: network/thirdparty.pm:427
 #, c-format
 msgid "Looking for required software and drivers..."
 msgstr ""
 
-#: network/thirdparty.pm:435
+#: network/thirdparty.pm:437
 #, fuzzy, c-format
 msgid "Please wait, running device configuration commands..."
 msgstr "請稍候，正在偵測與設定裝置中..."
 
-#: partition_table.pm:397
+#: partition_table.pm:391
 #, c-format
 msgid "mount failed: "
 msgstr "掛載失敗:"
 
-#: partition_table.pm:502
+#: partition_table.pm:496
 #, c-format
 msgid "Extended partition not supported on this platform"
 msgstr "這個平台並不支援延伸分割區"
 
-#: partition_table.pm:520
+#: partition_table.pm:514
 #, c-format
 msgid ""
 "You have a hole in your partition table but I can not use it.\n"
@@ -10823,17 +10822,17 @@ msgstr ""
 "您的硬碟分割表中有一個空洞, 我無法使用\n"
 "唯一的解決方法是將您的主分割區的位置搬移, 讓這些空洞與延伸分割區相鄰."
 
-#: partition_table.pm:611
+#: partition_table.pm:605
 #, c-format
 msgid "Restoring from file %s failed: %s"
 msgstr "試圖從檔案 %s 恢復時發生錯誤: %s"
 
-#: partition_table.pm:613
+#: partition_table.pm:607
 #, c-format
 msgid "Bad backup file"
 msgstr "壞掉的備份檔案"
 
-#: partition_table.pm:633
+#: partition_table.pm:627
 #, c-format
 msgid "Error writing to file %s"
 msgstr "寫入檔案 %s 時發生錯誤"
@@ -10850,32 +10849,32 @@ msgstr ""
 "資料完整性檢測已經失敗了.\n"
 "它意旨寫入任何東西到磁碟將會導致胡亂, 腐敗的資料."
 
-#: pkgs.pm:22
+#: pkgs.pm:21
 #, c-format
 msgid "must have"
 msgstr "必備的"
 
-#: pkgs.pm:23
+#: pkgs.pm:22
 #, c-format
 msgid "important"
 msgstr "重要的"
 
-#: pkgs.pm:24
+#: pkgs.pm:23
 #, c-format
 msgid "very nice"
 msgstr "極好的"
 
-#: pkgs.pm:25
+#: pkgs.pm:24
 #, c-format
 msgid "nice"
 msgstr "好的"
 
-#: pkgs.pm:26
+#: pkgs.pm:25
 #, c-format
 msgid "maybe"
 msgstr "或許"
 
-#: pkgs.pm:468
+#: pkgs.pm:458
 #, c-format
 msgid "Downloading file %s..."
 msgstr "正在下載檔案 %s..."
@@ -10900,9 +10899,9 @@ msgstr "於其他機器上被設定"
 msgid "On CUPS server \"%s\""
 msgstr "位於 CUPS 伺服器 \"%s\""
 
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
+#: printer/cups.pm:117 printer/printerdrake.pm:4761
+#: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916
+#: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137
 #, c-format
 msgid " (Default)"
 msgstr " (預設開機)"
@@ -11011,7 +11010,7 @@ msgstr "建議使用"
 
 #: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
 #: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
+#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174
 #, c-format
 msgid "Unknown model"
 msgstr "未知的型號"
@@ -11359,7 +11358,7 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
+#: printer/printerdrake.pm:4397
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
 msgstr ""
@@ -11506,7 +11505,7 @@ msgid "This server is already in the list, it cannot be added again.\n"
 msgstr "這個伺服器已經存在於列表中，無法重複新增\n"
 
 #: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
+#: standalone/drakups:251 standalone/harddrake2:52
 #, c-format
 msgid "Port"
 msgstr "通訊埠"
@@ -11518,8 +11517,8 @@ msgstr "通訊埠"
 msgid "On, Name or IP of remote server:"
 msgstr "開，遠端伺服器的名稱或 IP 位址："
 
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:4406
+#: printer/printerdrake.pm:4472
 #, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"
@@ -11540,19 +11539,19 @@ msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"
 #: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
 #: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
 #: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
+#: printer/printerdrake.pm:4201 printer/printerdrake.pm:4296
+#: printer/printerdrake.pm:4302 printer/printerdrake.pm:4326
+#: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542
+#: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571
+#: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784
+#: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313
 #: standalone/printerdrake:67 standalone/printerdrake:554
 #, c-format
 msgid "Printerdrake"
 msgstr "PrinterDrake"
 
 #: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
+#: printer/printerdrake.pm:4543
 #, c-format
 msgid "Reading printer data..."
 msgstr "正在讀取印表機資料..."
@@ -11583,7 +11582,7 @@ msgstr ""
 "位於遠端 CUPS 伺服器的印表機上並不需要在這裡設定；\n"
 "這些印表機將自動偵測到。"
 
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
+#: printer/printerdrake.pm:620 printer/printerdrake.pm:4786
 #, c-format
 msgid ""
 "\n"
@@ -11790,7 +11789,7 @@ msgstr "如果您的印表機並未列出，請選取一個相容 (見印表機�
 msgid "Configuring printer on %s..."
 msgstr "正在設定印表機於 %s..."
 
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
+#: printer/printerdrake.pm:885 printer/printerdrake.pm:4563
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "正在設定印表機 \"%s\" 中..."
@@ -11798,7 +11797,7 @@ msgstr "正在設定印表機 \"%s\" 中..."
 #: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
 #: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
 #: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
+#: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973
 #, c-format
 msgid "Add a new printer"
 msgstr "新增一個印表機"
@@ -12221,12 +12220,12 @@ msgid "Remote printer name missing!"
 msgstr "沒有指定印表機名稱 !"
 
 #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
+#: printer/printerdrake.pm:2111 standalone/drakTermServ:445
+#: standalone/drakTermServ:765 standalone/drakTermServ:781
+#: standalone/drakTermServ:1520 standalone/drakTermServ:1529
+#: standalone/drakTermServ:1541 standalone/drakbackup:499
 #: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
+#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:258
 #, c-format
 msgid "Information"
 msgstr "資訊"
@@ -12696,8 +12695,8 @@ msgstr ""
 msgid "Name of printer"
 msgstr "印表機名稱"
 
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
+#: printer/printerdrake.pm:2791 standalone/drakconnect:592
+#: standalone/harddrake2:39 standalone/printerdrake:211
 #: standalone/printerdrake:218
 #, c-format
 msgid "Description"
@@ -13096,7 +13095,7 @@ msgstr ""
 msgid "Did it work properly?"
 msgstr "列印正常嗎？"
 
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
+#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175
 #, c-format
 msgid "Raw printer"
 msgstr "Raw 印表機"
@@ -13524,7 +13523,7 @@ msgstr ""
 msgid "Go on without configuring the network"
 msgstr "略過網路設定項目繼續進行下面的步驟"
 
-#: printer/printerdrake.pm:4195
+#: printer/printerdrake.pm:4191
 #, fuzzy, c-format
 msgid ""
 "The network configuration done during the installation cannot be started "
@@ -13539,7 +13538,7 @@ msgstr ""
 "的設定, 您也可以透過 Mandriva 控制台程式, 在『硬體』內的\n"
 "『印表機』項目來進行設定"
 
-#: printer/printerdrake.pm:4196
+#: printer/printerdrake.pm:4192
 #, c-format
 msgid ""
 "The network access was not running and could not be started. Please check "
@@ -13550,27 +13549,27 @@ msgstr ""
 "請檢查一下您的設定, 甚至包含您的硬體是否設定正確無誤。\n"
 "當檢查完畢後, 再重新設定遠端列印的相關項目。"
 
-#: printer/printerdrake.pm:4206
+#: printer/printerdrake.pm:4202
 #, c-format
 msgid "Restarting printing system..."
 msgstr "正在重新啟動列印系統服務 ..."
 
-#: printer/printerdrake.pm:4237
+#: printer/printerdrake.pm:4233
 #, c-format
 msgid "high"
 msgstr "高"
 
-#: printer/printerdrake.pm:4237
+#: printer/printerdrake.pm:4233
 #, c-format
 msgid "paranoid"
 msgstr "瘋狂狀態"
 
-#: printer/printerdrake.pm:4239
+#: printer/printerdrake.pm:4235
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "在 %s 安全等級環境下正在安裝列印服務系統項目"
 
-#: printer/printerdrake.pm:4240
+#: printer/printerdrake.pm:4236
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -13595,12 +13594,12 @@ msgstr ""
 "\n"
 "您確定要開始設定這台機器上的列印項目設定嗎？"
 
-#: printer/printerdrake.pm:4276
+#: printer/printerdrake.pm:4272
 #, c-format
 msgid "Starting the printing system at boot time"
 msgstr "於開機時啟動列印服務系統"
 
-#: printer/printerdrake.pm:4277
+#: printer/printerdrake.pm:4273
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -13621,32 +13620,32 @@ msgstr ""
 "您希望這邊能夠設定在開機時能夠預設啟動列印\n"
 "服務的項目嗎？"
 
-#: printer/printerdrake.pm:4300
+#: printer/printerdrake.pm:4296
 #, c-format
 msgid "Checking installed software..."
 msgstr "正在檢查已經安裝的軟體"
 
-#: printer/printerdrake.pm:4306
+#: printer/printerdrake.pm:4302
 #, c-format
 msgid "Removing %s..."
 msgstr "正在移除 %s"
 
-#: printer/printerdrake.pm:4310
+#: printer/printerdrake.pm:4306
 #, fuzzy, c-format
 msgid "Could not remove the %s printing system!"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:4330
+#: printer/printerdrake.pm:4326
 #, c-format
 msgid "Installing %s..."
 msgstr "正在安裝套件 %s..."
 
-#: printer/printerdrake.pm:4334
+#: printer/printerdrake.pm:4330
 #, fuzzy, c-format
 msgid "Could not install the %s printing system!"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:4402
+#: printer/printerdrake.pm:4398
 #, c-format
 msgid ""
 "In this mode there is no local printing system, all printing requests go "
@@ -13655,46 +13654,46 @@ msgid ""
 "be printed at all from this machine."
 msgstr ""
 
-#: printer/printerdrake.pm:4404
+#: printer/printerdrake.pm:4400
 #, c-format
 msgid ""
 "Enter the host name or IP of your CUPS server and click OK if you want to "
 "use this mode, click \"Quit\" otherwise."
 msgstr ""
 
-#: printer/printerdrake.pm:4418
+#: printer/printerdrake.pm:4414
 #, fuzzy, c-format
 msgid "Name or IP of remote server:"
 msgstr "遠端的 lpd 伺服器印表機"
 
-#: printer/printerdrake.pm:4438
+#: printer/printerdrake.pm:4434
 #, fuzzy, c-format
 msgid "Setting Default Printer..."
 msgstr "預設印表機"
 
-#: printer/printerdrake.pm:4458
+#: printer/printerdrake.pm:4454
 #, fuzzy, c-format
 msgid "Local CUPS printing system or remote CUPS server?"
 msgstr "遠端的 CUPS 伺服器印表機"
 
-#: printer/printerdrake.pm:4459
+#: printer/printerdrake.pm:4455
 #, c-format
 msgid "The CUPS printing system can be used in two ways: "
 msgstr "CUPS 列印系統可以下列兩種方式使用："
 
-#: printer/printerdrake.pm:4461
+#: printer/printerdrake.pm:4457
 #, c-format
 msgid "1. The CUPS printing system can run locally. "
 msgstr "1. CUPS 列印系統可以在本地端執行。"
 
-#: printer/printerdrake.pm:4462
+#: printer/printerdrake.pm:4458
 #, c-format
 msgid ""
 "Then locally connected printers can be used and remote printers on other "
 "CUPS servers in the same network are automatically discovered. "
 msgstr ""
 
-#: printer/printerdrake.pm:4463
+#: printer/printerdrake.pm:4459
 #, c-format
 msgid ""
 "Disadvantage of this approach is, that more resources on the local machine "
@@ -13703,12 +13702,12 @@ msgid ""
 "(port 631) is opened. "
 msgstr ""
 
-#: printer/printerdrake.pm:4465
+#: printer/printerdrake.pm:4461
 #, c-format
 msgid "2. All printing requests are immediately sent to a remote CUPS server. "
 msgstr ""
 
-#: printer/printerdrake.pm:4466
+#: printer/printerdrake.pm:4462
 #, c-format
 msgid ""
 "Here local resource occupation is reduced to a minimum. No CUPS daemon is "
@@ -13716,55 +13715,55 @@ msgid ""
 "print queues is installed, so less memory and disk space is used. "
 msgstr ""
 
-#: printer/printerdrake.pm:4467
+#: printer/printerdrake.pm:4463
 #, c-format
 msgid ""
 "Disadvantage is that it is not possible to define local printers then and if "
 "the specified server is down it cannot be printed at all from this machine. "
 msgstr ""
 
-#: printer/printerdrake.pm:4469
+#: printer/printerdrake.pm:4465
 #, c-format
 msgid "How should CUPS be set up on your machine?"
 msgstr "您的 CUPS 系統應該如何設定？"
 
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
+#: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484
+#: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr ""
 
-#: printer/printerdrake.pm:4487
+#: printer/printerdrake.pm:4483
 #, fuzzy, c-format
 msgid "Local CUPS printing system"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:4526
+#: printer/printerdrake.pm:4522
 #, c-format
 msgid "Select Printer Spooler"
 msgstr "選擇印表列印系統"
 
-#: printer/printerdrake.pm:4527
+#: printer/printerdrake.pm:4523
 #, c-format
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "您打算用那一套列印系統？"
 
-#: printer/printerdrake.pm:4576
+#: printer/printerdrake.pm:4572
 #, fuzzy, c-format
 msgid "Failed to configure printer \"%s\"!"
 msgstr "正在設定「%s」印表機中 ..."
 
-#: printer/printerdrake.pm:4591
+#: printer/printerdrake.pm:4587
 #, c-format
 msgid "Installing Foomatic..."
 msgstr "正在安裝 Foomatic 套件..."
 
-#: printer/printerdrake.pm:4597
+#: printer/printerdrake.pm:4593
 #, c-format
 msgid "Could not install %s packages, %s cannot be started!"
 msgstr "無法安裝套件 %s，%s 啟動失敗！"
 
-#: printer/printerdrake.pm:4789
+#: printer/printerdrake.pm:4785
 #, fuzzy, c-format
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
@@ -13774,48 +13773,48 @@ msgstr ""
 "下列的印表機都已經設定過了, 您可以點選其中一個項目, \n"
 "可以查看內容資訊或者是修改內容設定, 包含設定為預設印表機。"
 
-#: printer/printerdrake.pm:4819
+#: printer/printerdrake.pm:4815
 #, fuzzy, c-format
 msgid "Display all available remote CUPS printers"
 msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"
 
-#: printer/printerdrake.pm:4820
+#: printer/printerdrake.pm:4816
 #, c-format
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"
 
-#: printer/printerdrake.pm:4831
+#: printer/printerdrake.pm:4827
 #, c-format
 msgid "CUPS configuration"
 msgstr "CUPS 設定組態"
 
-#: printer/printerdrake.pm:4843
+#: printer/printerdrake.pm:4839
 #, c-format
 msgid "Change the printing system"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:4852
+#: printer/printerdrake.pm:4848
 #, c-format
 msgid "Normal Mode"
 msgstr "一般模式"
 
-#: printer/printerdrake.pm:4853
+#: printer/printerdrake.pm:4849
 #, c-format
 msgid "Expert Mode"
 msgstr "專家模式"
 
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
+#: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176
+#: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264
 #, c-format
 msgid "Printer options"
 msgstr "印表機選項"
 
-#: printer/printerdrake.pm:5158
+#: printer/printerdrake.pm:5154
 #, c-format
 msgid "Modify printer configuration"
 msgstr "修改印表機設定"
 
-#: printer/printerdrake.pm:5160
+#: printer/printerdrake.pm:5156
 #, c-format
 msgid ""
 "Printer %s%s\n"
@@ -13824,109 +13823,109 @@ msgstr ""
 "印表機 %s%s\n"
 "您要修改這個印表機的那個項目？"
 
-#: printer/printerdrake.pm:5165
+#: printer/printerdrake.pm:5161
 #, fuzzy, c-format
 msgid "This printer is disabled"
 msgstr "這個分割區無法重新調整大小"
 
-#: printer/printerdrake.pm:5167
+#: printer/printerdrake.pm:5163
 #, c-format
 msgid "Do it!"
 msgstr "做吧 !"
 
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
+#: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223
 #, c-format
 msgid "Printer connection type"
 msgstr "印表機連線方式"
 
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
+#: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229
 #, c-format
 msgid "Printer name, description, location"
 msgstr "印表機名稱, 描述, 位置"
 
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
+#: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248
 #, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "印表機廠商,型號,驅動程式"
 
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
+#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249
 #, c-format
 msgid "Printer manufacturer, model"
 msgstr "印表機廠商,型號"
 
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
+#: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259
 #, c-format
 msgid "Set this printer as the default"
 msgstr "使用這台印表機為預設印表機"
 
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
+#: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265
+#: printer/printerdrake.pm:5267
 #, fuzzy, c-format
 msgid "Enable Printer"
 msgstr "開啟服務"
 
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
+#: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270
+#: printer/printerdrake.pm:5272
 #, fuzzy, c-format
 msgid "Disable Printer"
 msgstr "關閉服務"
 
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
+#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275
 #, c-format
 msgid "Print test pages"
 msgstr "列印測試頁..."
 
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
+#: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277
 #, fuzzy, c-format
 msgid "Learn how to use this printer"
 msgstr "瞭解如何使用這台印表機"
 
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
+#: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279
 #, c-format
 msgid "Remove printer"
 msgstr "刪除印表機"
 
-#: printer/printerdrake.pm:5241
+#: printer/printerdrake.pm:5237
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "正在刪除舊的印表機 \"%s\" ..."
 
-#: printer/printerdrake.pm:5272
+#: printer/printerdrake.pm:5268
 #, fuzzy, c-format
 msgid "Printer \"%s\" is now enabled."
 msgstr "印表機 \"%s\", 位於 \"%s\""
 
-#: printer/printerdrake.pm:5277
+#: printer/printerdrake.pm:5273
 #, fuzzy, c-format
 msgid "Printer \"%s\" is now disabled."
 msgstr "Internet 連線共享目前關閉了。"
 
-#: printer/printerdrake.pm:5314
+#: printer/printerdrake.pm:5310
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "您確定要刪除印表機 \"%s\" 嗎？"
 
-#: printer/printerdrake.pm:5318
+#: printer/printerdrake.pm:5314
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "正在移除印表機 \"%s\"..."
 
-#: printer/printerdrake.pm:5342
+#: printer/printerdrake.pm:5338
 #, c-format
 msgid "Default printer"
 msgstr "預設印表機"
 
-#: printer/printerdrake.pm:5343
+#: printer/printerdrake.pm:5339
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。"
 
-#: raid.pm:42
+#: raid.pm:41
 #, fuzzy, c-format
 msgid "Can not add a partition to _formatted_ RAID %s"
 msgstr "無法在 _已格式_ 化的磁碟陣列 md%d 中加入分割區"
 
-#: raid.pm:145
+#: raid.pm:144
 #, c-format
 msgid "Not enough partitions for RAID level %d\n"
 msgstr "分割區數目不足以用來設定成為階層 %d 的磁碟陣列\n"
@@ -15926,12 +15925,12 @@ msgid ""
 "purchase support incidents at <b>store.mandriva.com</b>."
 msgstr ""
 
-#: share/compssUsers.pl:25
+#: share/compssUsers.pl:26
 #, c-format
 msgid "Office Workstation"
 msgstr "辦公軟體平台"
 
-#: share/compssUsers.pl:27
+#: share/compssUsers.pl:28
 #, c-format
 msgid ""
 "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
@@ -15940,7 +15939,7 @@ msgstr ""
 "辦公軟體： 文書處理軟體 (OpenOffice.org Writer、Kword), 試算表 (OpenOffice."
 "org Calc、Kspread), pdf 閱讀程式等等"
 
-#: share/compssUsers.pl:28
+#: share/compssUsers.pl:29
 #, c-format
 msgid ""
 "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
@@ -15949,32 +15948,32 @@ msgstr ""
 "辦公軟體： 文書處理軟體 (kword、abiword), 試算表 (kspread、gnumeric), pdf 閱"
 "讀程式等等"
 
-#: share/compssUsers.pl:33
+#: share/compssUsers.pl:34
 #, c-format
 msgid "Game station"
 msgstr "遊戲平台"
 
-#: share/compssUsers.pl:34
+#: share/compssUsers.pl:35
 #, c-format
 msgid "Amusement programs: arcade, boards, strategy, etc"
 msgstr "娛樂的一些程式： 紙牌、益智、動作、策略 等"
 
-#: share/compssUsers.pl:37
+#: share/compssUsers.pl:38
 #, c-format
 msgid "Multimedia station"
 msgstr "多媒體平台"
 
-#: share/compssUsers.pl:38
+#: share/compssUsers.pl:39
 #, c-format
 msgid "Sound and video playing/editing programs"
 msgstr "音效以及影像撥放編輯程式"
 
-#: share/compssUsers.pl:43
+#: share/compssUsers.pl:44
 #, c-format
 msgid "Internet station"
 msgstr "Internet 平台"
 
-#: share/compssUsers.pl:44
+#: share/compssUsers.pl:45
 #, fuzzy, c-format
 msgid ""
 "Set of tools to read and send mail and news (mutt, tin..) and to browse the "
@@ -15982,246 +15981,251 @@ msgid ""
 msgstr ""
 "包含讀信、寫信以及閱讀網路論壇的工具 (pine、mutt、tin ..) 與及 web 瀏覽工具"
 
-#: share/compssUsers.pl:49
+#: share/compssUsers.pl:50
 #, c-format
 msgid "Network Computer (client)"
 msgstr "用戶端網路環境"
 
-#: share/compssUsers.pl:50
+#: share/compssUsers.pl:51
 #, c-format
 msgid "Clients for different protocols including ssh"
 msgstr "包含 ssh 等其他不同通訊協定的用戶端程式"
 
-#: share/compssUsers.pl:54
+#: share/compssUsers.pl:55
 #, c-format
 msgid "Configuration"
 msgstr "組態設定"
 
-#: share/compssUsers.pl:55
+#: share/compssUsers.pl:56
 #, c-format
 msgid "Tools to ease the configuration of your computer"
 msgstr "讓您方便設定您系統的工具"
 
-#: share/compssUsers.pl:59
+#: share/compssUsers.pl:60
 #, c-format
 msgid "Console Tools"
 msgstr "Console 工具"
 
-#: share/compssUsers.pl:60
+#: share/compssUsers.pl:61
 #, c-format
 msgid "Editors, shells, file tools, terminals"
 msgstr "編輯器, shell, 檔案工具, 終端機"
 
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
+#: share/compssUsers.pl:66 share/compssUsers.pl:170
 #, c-format
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C/C++ 發展環境, 包含編譯器、程式庫與及一些引入檔案"
 
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
+#: share/compssUsers.pl:70 share/compssUsers.pl:174
 #, c-format
 msgid "Documentation"
 msgstr "文件檔案"
 
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
+#: share/compssUsers.pl:71 share/compssUsers.pl:175
 #, c-format
 msgid "Books and Howto's on Linux and Free Software"
 msgstr "Linux 系統與一些免費軟體的書籍、HOWTO 文件"
 
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
+#: share/compssUsers.pl:75 share/compssUsers.pl:178
 #, c-format
 msgid "LSB"
 msgstr "LSB"
 
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
+#: share/compssUsers.pl:76 share/compssUsers.pl:179
 #, c-format
 msgid "Linux Standard Base. Third party applications support"
 msgstr "LSB 的支援, 包含第三類協力廠商軟體支援"
 
-#: share/compssUsers.pl:85
+#: share/compssUsers.pl:86
 #, c-format
 msgid "Apache"
 msgstr "Apache"
 
-#: share/compssUsers.pl:88
+#: share/compssUsers.pl:89
 #, fuzzy, c-format
 msgid "Groupware"
 msgstr "群組"
 
-#: share/compssUsers.pl:89
+#: share/compssUsers.pl:90
 #, c-format
 msgid "Kolab Server"
 msgstr "Kolab 伺服器"
 
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
+#: share/compssUsers.pl:93 share/compssUsers.pl:134
 #, c-format
 msgid "Firewall/Router"
 msgstr "防火牆/路由器"
 
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
+#: share/compssUsers.pl:94 share/compssUsers.pl:135
 #, c-format
 msgid "Internet gateway"
 msgstr "Internet 閘道器"
 
-#: share/compssUsers.pl:96
+#: share/compssUsers.pl:97
 #, fuzzy, c-format
 msgid "Mail/News"
 msgstr "/檔案 (F)/新增 (_N)"
 
-#: share/compssUsers.pl:97
+#: share/compssUsers.pl:98
 #, fuzzy, c-format
 msgid "Postfix mail server, Inn news server"
 msgstr "Postfix 郵件伺服器"
 
-#: share/compssUsers.pl:100
+#: share/compssUsers.pl:101
 #, fuzzy, c-format
 msgid "Directory Server"
 msgstr "使用光碟片回存"
 
-#: share/compssUsers.pl:104
+#: share/compssUsers.pl:105
 #, c-format
 msgid "FTP Server"
 msgstr "FTP 伺服器"
 
-#: share/compssUsers.pl:105
+#: share/compssUsers.pl:106
 #, c-format
 msgid "ProFTPd"
 msgstr ""
 
-#: share/compssUsers.pl:108
+#: share/compssUsers.pl:109
 #, c-format
 msgid "DNS/NIS"
 msgstr ""
 
-#: share/compssUsers.pl:109
+#: share/compssUsers.pl:110
 #, fuzzy, c-format
 msgid "Domain Name and Network Information Server"
 msgstr "網域名稱伺服器"
 
-#: share/compssUsers.pl:112
+#: share/compssUsers.pl:113
 #, fuzzy, c-format
 msgid "File and Printer Sharing Server"
 msgstr "列印伺服器名稱"
 
-#: share/compssUsers.pl:113
+#: share/compssUsers.pl:114
 #, fuzzy, c-format
 msgid "NFS Server, Samba server"
 msgstr "Samba 伺服器"
 
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
+#: share/compssUsers.pl:117 share/compssUsers.pl:130
 #, c-format
 msgid "Database"
 msgstr "資料庫軟體"
 
-#: share/compssUsers.pl:117
+#: share/compssUsers.pl:118
 #, fuzzy, c-format
 msgid "PostgreSQL and MySQL Database Server"
 msgstr "PostgreSQL、MySQL 資料庫"
 
-#: share/compssUsers.pl:121
+#: share/compssUsers.pl:122
 #, c-format
 msgid "Web/FTP"
 msgstr "Web/FTP"
 
-#: share/compssUsers.pl:122
+#: share/compssUsers.pl:123
 #, c-format
 msgid "Apache, Pro-ftpd"
 msgstr "Apache、ProFTPD"
 
-#: share/compssUsers.pl:125
+#: share/compssUsers.pl:126
 #, c-format
 msgid "Mail"
 msgstr "電郵"
 
-#: share/compssUsers.pl:126
+#: share/compssUsers.pl:127
 #, fuzzy, c-format
 msgid "Postfix mail server"
 msgstr "Postfix 郵件伺服器"
 
-#: share/compssUsers.pl:130
+#: share/compssUsers.pl:131
 #, c-format
 msgid "PostgreSQL or MySQL database server"
 msgstr "PostgreSQL、MySQL 資料庫"
 
-#: share/compssUsers.pl:137
+#: share/compssUsers.pl:138
 #, c-format
 msgid "Network Computer server"
 msgstr "網路伺服器"
 
-#: share/compssUsers.pl:138
+#: share/compssUsers.pl:139
 #, c-format
 msgid "NFS server, SMB server, Proxy server, ssh server"
 msgstr "NFS server、SMB server、Proxy server、Ssh server"
 
-#: share/compssUsers.pl:146
+#: share/compssUsers.pl:147
 #, c-format
 msgid "KDE Workstation"
 msgstr "KDE 環境"
 
-#: share/compssUsers.pl:147
+#: share/compssUsers.pl:148
 #, c-format
 msgid ""
 "The K Desktop Environment, the basic graphical environment with a collection "
 "of accompanying tools"
 msgstr "KDE 圖形桌面介面環境, 包含許多好用的圖型介面工具程式"
 
-#: share/compssUsers.pl:151
+#: share/compssUsers.pl:152
 #, c-format
 msgid "GNOME Workstation"
 msgstr "Gnome 環境"
 
-#: share/compssUsers.pl:152
+#: share/compssUsers.pl:153
 #, c-format
 msgid ""
 "A graphical environment with user-friendly set of applications and desktop "
 "tools"
 msgstr "包含友善的應用程式、桌面軟體的圖型化使用環境"
 
-#: share/compssUsers.pl:155
+#: share/compssUsers.pl:156
+#, fuzzy, c-format
+msgid "IceWm Desktop"
+msgstr "桌面"
+
+#: share/compssUsers.pl:160
 #, c-format
 msgid "Other Graphical Desktops"
 msgstr "其他圖型桌面軟體"
 
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
+#: share/compssUsers.pl:161
+#, fuzzy, c-format
+msgid "Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 等等管理程式"
 
-#: share/compssUsers.pl:179
+#: share/compssUsers.pl:184
 #, fuzzy, c-format
 msgid "Utilities"
 msgstr "Philippines"
 
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
+#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381
 #, c-format
 msgid "SSH Server"
 msgstr "NIS 伺服主機"
 
-#: share/compssUsers.pl:186
+#: share/compssUsers.pl:191
 #, c-format
 msgid "Webmin"
 msgstr "Webmin"
 
-#: share/compssUsers.pl:187
+#: share/compssUsers.pl:192
 #, c-format
 msgid "Webmin Remote Configuration Server"
 msgstr "Webmin 遠端設定伺服器"
 
-#: share/compssUsers.pl:191
+#: share/compssUsers.pl:196
 #, c-format
 msgid "Network Utilities/Monitoring"
 msgstr "網路工具/監控"
 
-#: share/compssUsers.pl:192
+#: share/compssUsers.pl:197
 #, c-format
 msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
 msgstr ""
 
-#: share/compssUsers.pl:196
+#: share/compssUsers.pl:201
 #, c-format
 msgid "Mandriva Wizards"
 msgstr "Mandriva Linux 精靈"
 
-#: share/compssUsers.pl:197
+#: share/compssUsers.pl:202
 #, c-format
 msgid "Wizards to configure server"
 msgstr "用來設定伺服器的精靈"
@@ -16392,109 +16396,109 @@ msgid ""
 "testing] [-v|--version] "
 msgstr ""
 
-#: standalone/XFdrake:61
+#: standalone/XFdrake:59
 #, fuzzy, c-format
 msgid "You need to reboot for changes to take effect"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: standalone/XFdrake:92
+#: standalone/XFdrake:90
 #, c-format
 msgid "Please log out and then use Ctrl-Alt-BackSpace"
 msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"
 
-#: standalone/XFdrake:96
+#: standalone/XFdrake:94
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr ""
 
-#: standalone/drakTermServ:75
+#: standalone/drakTermServ:74
 #, c-format
 msgid "Useless without Terminal Server"
 msgstr ""
 
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
+#: standalone/drakTermServ:106 standalone/drakTermServ:112
 #, c-format
 msgid "%s: %s requires a username...\n"
 msgstr ""
 
-#: standalone/drakTermServ:124
+#: standalone/drakTermServ:123
 #, c-format
 msgid ""
 "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
 "0/1 for Local Config...\n"
 msgstr ""
 
-#: standalone/drakTermServ:130
+#: standalone/drakTermServ:129
 #, c-format
 msgid "%s: %s requires hostname...\n"
 msgstr ""
 
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
+#: standalone/drakTermServ:211 standalone/drakTermServ:214
 #, fuzzy, c-format
 msgid "Terminal Server Configuration"
 msgstr "Mandriva Terminal Server 設定"
 
-#: standalone/drakTermServ:221
+#: standalone/drakTermServ:220
 #, c-format
 msgid "Enable Server"
 msgstr "開啟服務"
 
-#: standalone/drakTermServ:227
+#: standalone/drakTermServ:226
 #, c-format
 msgid "Disable Server"
 msgstr "關閉服務"
 
-#: standalone/drakTermServ:233
+#: standalone/drakTermServ:232
 #, c-format
 msgid "Start Server"
 msgstr "啟動服務"
 
-#: standalone/drakTermServ:239
+#: standalone/drakTermServ:238
 #, c-format
 msgid "Stop Server"
 msgstr "停止服務"
 
-#: standalone/drakTermServ:248
+#: standalone/drakTermServ:247
 #, c-format
 msgid "Etherboot Floppy/ISO"
 msgstr "網路開機 Floppy/ISO"
 
-#: standalone/drakTermServ:252
+#: standalone/drakTermServ:251
 #, c-format
 msgid "Net Boot Images"
 msgstr "網路開機映像檔"
 
-#: standalone/drakTermServ:259
+#: standalone/drakTermServ:258
 #, c-format
 msgid "Add/Del Users"
 msgstr "新增/刪除使用者"
 
-#: standalone/drakTermServ:263
+#: standalone/drakTermServ:262
 #, c-format
 msgid "Add/Del Clients"
 msgstr "新增/刪除用戶端"
 
-#: standalone/drakTermServ:271
+#: standalone/drakTermServ:270
 #, c-format
 msgid "Images"
 msgstr "圖像"
 
-#: standalone/drakTermServ:272
+#: standalone/drakTermServ:271
 #, c-format
 msgid "Clients/Users"
 msgstr ""
 
-#: standalone/drakTermServ:290 standalone/drakbug:47
+#: standalone/drakTermServ:289 standalone/drakbug:47
 #, c-format
 msgid "First Time Wizard"
 msgstr "首次巫師"
 
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
+#: standalone/drakTermServ:325 standalone/drakTermServ:326
 #, c-format
 msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
 msgstr ""
 
-#: standalone/drakTermServ:333
+#: standalone/drakTermServ:332
 #, c-format
 msgid ""
 "\n"
@@ -16517,27 +16521,27 @@ msgid ""
 "    f) If it's thin clients, ask if you want to restart KDM.\n"
 msgstr ""
 
-#: standalone/drakTermServ:378
+#: standalone/drakTermServ:377
 #, c-format
 msgid "Cancel Wizard"
 msgstr "取消精靈"
 
-#: standalone/drakTermServ:393
+#: standalone/drakTermServ:392
 #, c-format
 msgid "Please save dhcpd config!"
 msgstr ""
 
-#: standalone/drakTermServ:421
+#: standalone/drakTermServ:420
 #, fuzzy, c-format
 msgid "Use thin clients."
 msgstr "新增/刪除用戶端"
 
-#: standalone/drakTermServ:423
+#: standalone/drakTermServ:422
 #, c-format
 msgid "Sync client X keyboard settings with server."
 msgstr ""
 
-#: standalone/drakTermServ:425
+#: standalone/drakTermServ:424
 #, c-format
 msgid ""
 "Please select default client type.\n"
@@ -16546,28 +16550,28 @@ msgid ""
 "    'Fat' clients use their own CPU/RAM but the server's filesystem."
 msgstr ""
 
-#: standalone/drakTermServ:445
+#: standalone/drakTermServ:444
 #, c-format
 msgid "Creating net boot images for all kernels"
 msgstr ""
 
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
+#: standalone/drakTermServ:445 standalone/drakTermServ:765
+#: standalone/drakTermServ:781
 #, c-format
 msgid "This will take a few minutes."
 msgstr "這個過程將會需要花費一些時間。"
 
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
+#: standalone/drakTermServ:454 standalone/drakTermServ:495
 #, fuzzy, c-format
 msgid "Done!"
 msgstr "完成"
 
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
+#: standalone/drakTermServ:466 standalone/drakTermServ:846
 #, c-format
 msgid "%s failed"
 msgstr ""
 
-#: standalone/drakTermServ:476
+#: standalone/drakTermServ:475
 #, c-format
 msgid ""
 "Not enough space to create\n"
@@ -16575,24 +16579,24 @@ msgid ""
 "Needed: %d MB, Free: %d MB"
 msgstr ""
 
-#: standalone/drakTermServ:482
+#: standalone/drakTermServ:481
 #, c-format
 msgid "Syncing server user list with client list, including root."
 msgstr ""
 
-#: standalone/drakTermServ:502
+#: standalone/drakTermServ:501
 #, c-format
 msgid ""
 "In order to enable changes made for thin clients, the display manager must "
 "be restarted. Restart now?"
 msgstr ""
 
-#: standalone/drakTermServ:537
+#: standalone/drakTermServ:536
 #, fuzzy, c-format
 msgid "Terminal Server Overview"
 msgstr "Mandriva Terminal Server 設定"
 
-#: standalone/drakTermServ:538
+#: standalone/drakTermServ:537
 #, c-format
 msgid ""
 "        - Create Etherboot Enabled Boot Images:\n"
@@ -16608,7 +16612,7 @@ msgid ""
 "one full kernel."
 msgstr ""
 
-#: standalone/drakTermServ:544
+#: standalone/drakTermServ:543
 #, c-format
 msgid ""
 "        - Maintain /etc/dhcpd.conf:\n"
@@ -16628,7 +16632,7 @@ msgid ""
 "like:"
 msgstr ""
 
-#: standalone/drakTermServ:562
+#: standalone/drakTermServ:561
 #, c-format
 msgid ""
 "        While you can use a pool of IP addresses, rather than setup a "
@@ -16667,7 +16671,7 @@ msgid ""
 "clients."
 msgstr ""
 
-#: standalone/drakTermServ:582
+#: standalone/drakTermServ:581
 #, c-format
 msgid ""
 "        - Maintain /etc/exports:\n"
@@ -16685,7 +16689,7 @@ msgid ""
 "        \tWith SUBNET/MASK being defined for your network."
 msgstr ""
 
-#: standalone/drakTermServ:594
+#: standalone/drakTermServ:593
 #, c-format
 msgid ""
 "        - Maintain %s:\n"
@@ -16696,7 +16700,7 @@ msgid ""
 "file."
 msgstr ""
 
-#: standalone/drakTermServ:598
+#: standalone/drakTermServ:597
 #, c-format
 msgid ""
 "        - Per client %s:\n"
@@ -16707,7 +16711,7 @@ msgid ""
 "        \tdrakTermServ will help create these files."
 msgstr ""
 
-#: standalone/drakTermServ:603
+#: standalone/drakTermServ:602
 #, c-format
 msgid ""
 "        - Per client system configuration files:\n"
@@ -16727,7 +16731,7 @@ msgid ""
 "machine is configured."
 msgstr ""
 
-#: standalone/drakTermServ:612
+#: standalone/drakTermServ:611
 #, c-format
 msgid ""
 "        - /etc/xinetd.d/tftp:\n"
@@ -16757,7 +16761,7 @@ msgid ""
 "        \tputs its images."
 msgstr ""
 
-#: standalone/drakTermServ:633
+#: standalone/drakTermServ:632
 #, c-format
 msgid ""
 "        - Create etherboot floppies/CDs:\n"
@@ -16773,72 +16777,72 @@ msgid ""
 "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
 msgstr ""
 
-#: standalone/drakTermServ:666
+#: standalone/drakTermServ:665
 #, c-format
 msgid "Boot Floppy"
 msgstr "開機片"
 
-#: standalone/drakTermServ:668
+#: standalone/drakTermServ:667
 #, c-format
 msgid "Boot ISO"
 msgstr "開機映像檔案"
 
-#: standalone/drakTermServ:670
+#: standalone/drakTermServ:669
 #, fuzzy, c-format
 msgid "PXE Image"
 msgstr "核心"
 
-#: standalone/drakTermServ:731
+#: standalone/drakTermServ:730
 #, fuzzy, c-format
 msgid "Default kernel version"
 msgstr "核心版本"
 
-#: standalone/drakTermServ:734
+#: standalone/drakTermServ:733
 #, c-format
 msgid "Create PXE images."
 msgstr ""
 
-#: standalone/drakTermServ:764
+#: standalone/drakTermServ:763
 #, c-format
 msgid "Build Whole Kernel -->"
 msgstr "建立整個核心 -->"
 
-#: standalone/drakTermServ:771
+#: standalone/drakTermServ:770
 #, c-format
 msgid "No kernel selected!"
 msgstr "未選取核心!"
 
-#: standalone/drakTermServ:774
+#: standalone/drakTermServ:773
 #, c-format
 msgid "Build Single NIC -->"
 msgstr "建立單一網路卡 -->"
 
-#: standalone/drakTermServ:778
+#: standalone/drakTermServ:777
 #, c-format
 msgid "No NIC selected!"
 msgstr "未選擇網路卡!"
 
-#: standalone/drakTermServ:781
+#: standalone/drakTermServ:780
 #, c-format
 msgid "Build All Kernels -->"
 msgstr "建立所有核心 -->"
 
-#: standalone/drakTermServ:796
+#: standalone/drakTermServ:795
 #, c-format
 msgid "<-- Delete"
 msgstr "<-- 刪除"
 
-#: standalone/drakTermServ:801
+#: standalone/drakTermServ:800
 #, fuzzy, c-format
 msgid "No image selected!"
 msgstr "未選擇網路卡!"
 
-#: standalone/drakTermServ:804
+#: standalone/drakTermServ:803
 #, c-format
 msgid "Delete All NBIs"
 msgstr "刪除所有 NBI"
 
-#: standalone/drakTermServ:933
+#: standalone/drakTermServ:932
 #, c-format
 msgid ""
 "!!! Indicates the password in the system database is different than\n"
@@ -16846,178 +16850,178 @@ msgid ""
 "Delete/re-add the user to the Terminal Server to enable login."
 msgstr ""
 
-#: standalone/drakTermServ:938
+#: standalone/drakTermServ:937
 #, c-format
 msgid "Add User -->"
 msgstr "新增使用者 -->"
 
-#: standalone/drakTermServ:944
+#: standalone/drakTermServ:943
 #, c-format
 msgid "<-- Del User"
 msgstr "<-- 刪除使用者"
 
-#: standalone/drakTermServ:980
+#: standalone/drakTermServ:979
 #, fuzzy, c-format
 msgid "type: %s"
 msgstr "格式： "
 
-#: standalone/drakTermServ:984
+#: standalone/drakTermServ:983
 #, c-format
 msgid "local config: %s"
 msgstr ""
 
-#: standalone/drakTermServ:1014
+#: standalone/drakTermServ:1013
 #, fuzzy, c-format
 msgid ""
 "Allow local hardware\n"
 "configuration."
 msgstr "自動重新設定"
 
-#: standalone/drakTermServ:1023
+#: standalone/drakTermServ:1022
 #, c-format
 msgid "No net boot images created!"
 msgstr "並未建立網路開機映像檔"
 
-#: standalone/drakTermServ:1042
+#: standalone/drakTermServ:1041
 #, fuzzy, c-format
 msgid "Thin Client"
 msgstr "DHCP 用戶端"
 
-#: standalone/drakTermServ:1046
+#: standalone/drakTermServ:1045
 #, fuzzy, c-format
 msgid "Allow Thin Clients"
 msgstr "新增/刪除用戶端"
 
-#: standalone/drakTermServ:1047
+#: standalone/drakTermServ:1046
 #, c-format
 msgid ""
 "Sync client X keyboard\n"
 " settings with server."
 msgstr ""
 
-#: standalone/drakTermServ:1048
+#: standalone/drakTermServ:1047
 #, c-format
 msgid "Add Client -->"
 msgstr "新增用戶端 -->"
 
-#: standalone/drakTermServ:1062
+#: standalone/drakTermServ:1061
 #, fuzzy, c-format
 msgid "type: fat"
 msgstr "格式： "
 
-#: standalone/drakTermServ:1063
+#: standalone/drakTermServ:1062
 #, fuzzy, c-format
 msgid "type: thin"
 msgstr "格式： "
 
-#: standalone/drakTermServ:1070
+#: standalone/drakTermServ:1069
 #, fuzzy, c-format
 msgid "local config: false"
 msgstr "本機密碼檔"
 
-#: standalone/drakTermServ:1071
+#: standalone/drakTermServ:1070
 #, fuzzy, c-format
 msgid "local config: true"
 msgstr "重新設定"
 
-#: standalone/drakTermServ:1079
+#: standalone/drakTermServ:1078
 #, c-format
 msgid "<-- Edit Client"
 msgstr "<-- 刪除用戶端"
 
-#: standalone/drakTermServ:1105
+#: standalone/drakTermServ:1104
 #, c-format
 msgid "Disable Local Config"
 msgstr ""
 
-#: standalone/drakTermServ:1112
+#: standalone/drakTermServ:1111
 #, fuzzy, c-format
 msgid "Delete Client"
 msgstr "<-- 刪除用戶端"
 
-#: standalone/drakTermServ:1121
+#: standalone/drakTermServ:1120
 #, c-format
 msgid "dhcpd Config..."
 msgstr "dhcpd 設定..."
 
-#: standalone/drakTermServ:1136
+#: standalone/drakTermServ:1135
 #, c-format
 msgid ""
 "Need to restart the Display Manager for full changes to take effect. \n"
 "(service dm restart - at the console)"
 msgstr ""
 
-#: standalone/drakTermServ:1181
+#: standalone/drakTermServ:1180
 #, c-format
 msgid "Thin clients will not work with autologin. Disable autologin?"
 msgstr ""
 
-#: standalone/drakTermServ:1197
+#: standalone/drakTermServ:1196
 #, c-format
 msgid "All clients will use %s"
 msgstr ""
 
-#: standalone/drakTermServ:1231
+#: standalone/drakTermServ:1230
 #, c-format
 msgid "Subnet:"
 msgstr "子網路:"
 
-#: standalone/drakTermServ:1238
+#: standalone/drakTermServ:1237
 #, c-format
 msgid "Netmask:"
 msgstr "網路遮罩"
 
-#: standalone/drakTermServ:1245
+#: standalone/drakTermServ:1244
 #, c-format
 msgid "Routers:"
 msgstr ""
 
-#: standalone/drakTermServ:1252
+#: standalone/drakTermServ:1251
 #, c-format
 msgid "Subnet Mask:"
 msgstr "子網路遮罩："
 
-#: standalone/drakTermServ:1259
+#: standalone/drakTermServ:1258
 #, c-format
 msgid "Broadcast Address:"
 msgstr ""
 
-#: standalone/drakTermServ:1266
+#: standalone/drakTermServ:1265
 #, fuzzy, c-format
 msgid "Domain Name:"
 msgstr "網域名稱"
 
-#: standalone/drakTermServ:1274
+#: standalone/drakTermServ:1273
 #, fuzzy, c-format
 msgid "Name Servers:"
 msgstr "Samba 伺服器"
 
-#: standalone/drakTermServ:1285
+#: standalone/drakTermServ:1284
 #, c-format
 msgid "IP Range Start:"
 msgstr ""
 
-#: standalone/drakTermServ:1286
+#: standalone/drakTermServ:1285
 #, c-format
 msgid "IP Range End:"
 msgstr ""
 
-#: standalone/drakTermServ:1328
+#: standalone/drakTermServ:1327
 #, c-format
 msgid "Append TS Includes To Existing Config"
 msgstr ""
 
-#: standalone/drakTermServ:1330
+#: standalone/drakTermServ:1329
 #, c-format
 msgid "Write Config"
 msgstr "寫入設定"
 
-#: standalone/drakTermServ:1346
+#: standalone/drakTermServ:1345
 #, c-format
 msgid "dhcpd Server Configuration"
 msgstr "dhcpd 伺服器設定"
 
-#: standalone/drakTermServ:1347
+#: standalone/drakTermServ:1346
 #, c-format
 msgid ""
 "Most of these values were extracted\n"
@@ -17025,104 +17029,104 @@ msgid ""
 "You can modify as needed."
 msgstr ""
 
-#: standalone/drakTermServ:1350
+#: standalone/drakTermServ:1349
 #, c-format
 msgid ""
 "Dynamic IP Address Pool\n"
 "(needed for PXE clients):"
 msgstr ""
 
-#: standalone/drakTermServ:1503
+#: standalone/drakTermServ:1502
 #, c-format
 msgid "Write to %s failed!"
 msgstr ""
 
-#: standalone/drakTermServ:1515
+#: standalone/drakTermServ:1514
 #, c-format
 msgid "Please insert floppy disk:"
 msgstr "請插入一張軟片:"
 
-#: standalone/drakTermServ:1519
+#: standalone/drakTermServ:1518
 #, c-format
 msgid "Could not access the floppy!"
 msgstr "無法存取到軟碟"
 
-#: standalone/drakTermServ:1521
+#: standalone/drakTermServ:1520
 #, c-format
 msgid "Floppy can be removed now"
 msgstr "請移開軟碟內的軟片"
 
-#: standalone/drakTermServ:1524
+#: standalone/drakTermServ:1523
 #, c-format
 msgid "No floppy drive available!"
 msgstr "沒有可用的軟碟機"
 
-#: standalone/drakTermServ:1530
+#: standalone/drakTermServ:1529
 #, fuzzy, c-format
 msgid "PXE image is %s/%s"
 msgstr "網路開機的映像檔案是 %s"
 
-#: standalone/drakTermServ:1532
+#: standalone/drakTermServ:1531
 #, fuzzy, c-format
 msgid "Error writing %s/%s"
 msgstr "寫入檔案 %s 時發生錯誤"
 
-#: standalone/drakTermServ:1542
+#: standalone/drakTermServ:1541
 #, c-format
 msgid "Etherboot ISO image is %s"
 msgstr "網路開機的映像檔案是 %s"
 
-#: standalone/drakTermServ:1544
+#: standalone/drakTermServ:1543
 #, c-format
 msgid "Something went wrong! - Is mkisofs installed?"
 msgstr "製作時發生錯誤, 您確認你有安裝 mkisofs 程式"
 
-#: standalone/drakTermServ:1565
+#: standalone/drakTermServ:1564
 #, c-format
 msgid "Need to create /etc/dhcpd.conf first!"
 msgstr "需要建立 /etc/dhcpd.conf 檔案！"
 
-#: standalone/drakTermServ:1724
+#: standalone/drakTermServ:1723
 #, c-format
 msgid "%s passwd bad in Terminal Server - rewriting...\n"
 msgstr ""
 
-#: standalone/drakTermServ:1737
+#: standalone/drakTermServ:1736
 #, fuzzy, c-format
 msgid "%s is not a user..\n"
 msgstr "%s 沒有正常回應"
 
-#: standalone/drakTermServ:1738
+#: standalone/drakTermServ:1737
 #, c-format
 msgid "%s is already a Terminal Server user\n"
 msgstr ""
 
-#: standalone/drakTermServ:1740
+#: standalone/drakTermServ:1739
 #, c-format
 msgid "Addition of %s to Terminal Server failed!\n"
 msgstr ""
 
-#: standalone/drakTermServ:1742
+#: standalone/drakTermServ:1741
 #, c-format
 msgid "%s added to Terminal Server\n"
 msgstr ""
 
-#: standalone/drakTermServ:1759
+#: standalone/drakTermServ:1758
 #, fuzzy, c-format
 msgid "Deleted %s...\n"
 msgstr "偵測到 %s"
 
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
+#: standalone/drakTermServ:1760 standalone/drakTermServ:1833
 #, fuzzy, c-format
 msgid "%s not found...\n"
 msgstr "%s 沒有正常回應"
 
-#: standalone/drakTermServ:1862
+#: standalone/drakTermServ:1861
 #, c-format
 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
 msgstr ""
 
-#: standalone/drakTermServ:2002
+#: standalone/drakTermServ:2001
 #, c-format
 msgid "Configuration changed - restart clusternfs/dhcpd?"
 msgstr ""
@@ -17204,7 +17208,7 @@ msgstr "請在 %s 中插入一片空白軟片"
 msgid "Creating auto install floppy (drivers disk)"
 msgstr "正在製作自動安裝軟片"
 
-#: standalone/drakautoinst:158
+#: standalone/drakautoinst:156
 #, c-format
 msgid ""
 "\n"
@@ -17217,7 +17221,7 @@ msgstr ""
 "\n"
 "自動安裝內可用的參數項目都在左邊的區段內"
 
-#: standalone/drakautoinst:253
+#: standalone/drakautoinst:251
 #, c-format
 msgid ""
 "The floppy has been successfully generated.\n"
@@ -17226,17 +17230,17 @@ msgstr ""
 "已經成功建立自動安裝軟片。\n"
 "您可以使用這張軟片進行自動安裝的程序"
 
-#: standalone/drakautoinst:289
+#: standalone/drakautoinst:287
 #, c-format
 msgid "Auto Install"
 msgstr "自動安裝"
 
-#: standalone/drakautoinst:358
+#: standalone/drakautoinst:356
 #, c-format
 msgid "Add an item"
 msgstr "新增項目"
 
-#: standalone/drakautoinst:365
+#: standalone/drakautoinst:363
 #, c-format
 msgid "Remove the last item"
 msgstr "移除之前項目"
@@ -17292,7 +17296,7 @@ msgstr ""
 #, c-format
 msgid ""
 "This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
+"from. Default is drakbackup."
 msgstr ""
 
 #: standalone/drakbackup:161
@@ -17340,12 +17344,12 @@ msgstr ""
 msgid "Interval cron not available as non-root"
 msgstr "Cron 使用非 root 身份執行時無法使用"
 
-#: standalone/drakbackup:465 standalone/logdrake:438
+#: standalone/drakbackup:465 standalone/logdrake:437
 #, c-format
 msgid "\"%s\" neither is a valid email nor is an existing local user!"
 msgstr ""
 
-#: standalone/drakbackup:469 standalone/logdrake:443
+#: standalone/drakbackup:469 standalone/logdrake:442
 #, c-format
 msgid ""
 "\"%s\" is a local user, but you did not select a local smtp, so you must use "
@@ -17617,7 +17621,7 @@ msgstr "郵件發送時發生錯誤。\n"
 msgid "Can not create catalog!"
 msgstr "無法建立 catalog 資訊"
 
-#: standalone/drakbackup:1392
+#: standalone/drakbackup:1394
 #, c-format
 msgid ""
 "\n"
@@ -17626,231 +17630,231 @@ msgstr ""
 "\n"
 "請檢視您所需要的全部項目。\n"
 
-#: standalone/drakbackup:1393
+#: standalone/drakbackup:1395
 #, c-format
 msgid ""
 "These options can backup and restore all files in your /etc directory.\n"
 msgstr "這個選項能夠備份與還原您系統的 /etc 目錄。\n"
 
-#: standalone/drakbackup:1394
+#: standalone/drakbackup:1396
 #, c-format
 msgid "Backup your System files. (/etc directory)"
 msgstr "備份您的系統檔案。(/etc 目錄)"
 
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
+#: standalone/drakbackup:1397 standalone/drakbackup:1461
+#: standalone/drakbackup:1527
 #, fuzzy, c-format
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr "使用遞增備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
+#: standalone/drakbackup:1399 standalone/drakbackup:1463
+#: standalone/drakbackup:1529
 #, c-format
 msgid "Use Incremental Backups"
 msgstr "使用遞增備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
+#: standalone/drakbackup:1399 standalone/drakbackup:1463
+#: standalone/drakbackup:1529
 #, c-format
 msgid "Use Differential Backups"
 msgstr ""
 
-#: standalone/drakbackup:1399
+#: standalone/drakbackup:1401
 #, c-format
 msgid "Do not include critical files (passwd, group, fstab)"
 msgstr "不要包含重要的檔案 (passwd、group、fstab)"
 
-#: standalone/drakbackup:1400
+#: standalone/drakbackup:1402
 #, c-format
 msgid ""
 "With this option you will be able to restore any version\n"
 " of your /etc directory."
 msgstr "使用該選項您將能夠還原任何版本 /etc 檔案目錄."
 
-#: standalone/drakbackup:1431
+#: standalone/drakbackup:1433
 #, c-format
 msgid "Please check all users that you want to include in your backup."
 msgstr "請檢查希望要備份的所有使用者項目。"
 
-#: standalone/drakbackup:1458
+#: standalone/drakbackup:1460
 #, c-format
 msgid "Do not include the browser cache"
 msgstr "不要包含瀏覽器的快取資料檔"
 
-#: standalone/drakbackup:1512
+#: standalone/drakbackup:1514
 #, fuzzy, c-format
 msgid "Select the files or directories and click on 'OK'"
 msgstr "選取檔案或者是目錄, 然後點選 '加入'"
 
-#: standalone/drakbackup:1513 standalone/drakfont:657
+#: standalone/drakbackup:1515 standalone/drakfont:657
 #, c-format
 msgid "Remove Selected"
 msgstr "移除選取項目"
 
-#: standalone/drakbackup:1576
+#: standalone/drakbackup:1578
 #, c-format
 msgid "Users"
 msgstr "使用者"
 
-#: standalone/drakbackup:1596
+#: standalone/drakbackup:1598
 #, c-format
 msgid "Use network connection to backup"
 msgstr "使用 FTP 連線備份"
 
-#: standalone/drakbackup:1598
+#: standalone/drakbackup:1600
 #, c-format
 msgid "Net Method:"
 msgstr "網路方式:"
 
-#: standalone/drakbackup:1602
+#: standalone/drakbackup:1604
 #, c-format
 msgid "Use Expect for SSH"
 msgstr ""
 
-#: standalone/drakbackup:1603
+#: standalone/drakbackup:1605
 #, fuzzy, c-format
 msgid "Create/Transfer backup keys for SSH"
 msgstr ""
 "建立/傳送\n"
 "備份 SSH 的憑證檔案"
 
-#: standalone/drakbackup:1605
+#: standalone/drakbackup:1607
 #, fuzzy, c-format
 msgid "Transfer Now"
 msgstr ""
 "  傳送    \n"
 "現在"
 
-#: standalone/drakbackup:1607
+#: standalone/drakbackup:1609
 #, fuzzy, c-format
 msgid "Other (not drakbackup) keys in place already"
 msgstr ""
 "其他 (非 drakbackup)\n"
 "認證憑證檔案已經存在"
 
-#: standalone/drakbackup:1610
+#: standalone/drakbackup:1612
 #, fuzzy, c-format
 msgid "Host name or IP."
 msgstr "主機名稱"
 
-#: standalone/drakbackup:1615
+#: standalone/drakbackup:1617
 #, c-format
 msgid "Directory (or module) to put the backup on this host."
 msgstr "請輸入要備份到該主機的所在目錄名稱"
 
-#: standalone/drakbackup:1627
+#: standalone/drakbackup:1629
 #, c-format
 msgid "Remember this password"
 msgstr "記住該密碼"
 
-#: standalone/drakbackup:1643
+#: standalone/drakbackup:1645
 #, c-format
 msgid "Need hostname, username and password!"
 msgstr "需要指定主機名稱、使用者與密碼！"
 
-#: standalone/drakbackup:1734
+#: standalone/drakbackup:1736
 #, c-format
 msgid "Use CD-R/DVD-R to backup"
 msgstr "使用 CD/DVDROM 備份"
 
-#: standalone/drakbackup:1737
+#: standalone/drakbackup:1739
 #, fuzzy, c-format
 msgid "Choose your CD/DVD device"
 msgstr "請選取您 CD/DVD 容量大小"
 
-#: standalone/drakbackup:1742
+#: standalone/drakbackup:1744
 #, fuzzy, c-format
 msgid "Choose your CD/DVD media size"
 msgstr "請選取您 CD/DVD 容量大小"
 
-#: standalone/drakbackup:1749
+#: standalone/drakbackup:1751
 #, c-format
 msgid "Multisession CD"
 msgstr "Multisession CD"
 
-#: standalone/drakbackup:1751
+#: standalone/drakbackup:1753
 #, c-format
 msgid "CDRW media"
 msgstr ""
 
-#: standalone/drakbackup:1757
+#: standalone/drakbackup:1759
 #, fuzzy, c-format
 msgid "Erase your RW media (1st Session)"
 msgstr "如果您要先清除該讀寫媒介裝置上的資料 (1st Session), 請選取該項目"
 
-#: standalone/drakbackup:1758
+#: standalone/drakbackup:1760
 #, c-format
 msgid " Erase Now "
 msgstr " 刪除中 "
 
-#: standalone/drakbackup:1764
+#: standalone/drakbackup:1766
 #, c-format
 msgid "DVD+RW media"
 msgstr ""
 
-#: standalone/drakbackup:1766
+#: standalone/drakbackup:1768
 #, fuzzy, c-format
 msgid "DVD-R media"
 msgstr "裝置設備"
 
-#: standalone/drakbackup:1768
+#: standalone/drakbackup:1770
 #, fuzzy, c-format
 msgid "DVDRAM device"
 msgstr "裝置設備"
 
-#: standalone/drakbackup:1799
+#: standalone/drakbackup:1801
 #, c-format
 msgid "No CD device defined!"
 msgstr "尚未有任何 CD 裝置定義!"
 
-#: standalone/drakbackup:1841
+#: standalone/drakbackup:1843
 #, c-format
 msgid "Use tape to backup"
 msgstr "使用磁帶進行備份"
 
-#: standalone/drakbackup:1844
+#: standalone/drakbackup:1846
 #, fuzzy, c-format
 msgid "Device name to use for backup"
 msgstr "請輸入您要用來備份使用的裝置名稱"
 
-#: standalone/drakbackup:1850
+#: standalone/drakbackup:1852
 #, c-format
 msgid "Backup directly to tape"
 msgstr ""
 
-#: standalone/drakbackup:1856
+#: standalone/drakbackup:1858
 #, c-format
 msgid "Do not rewind tape after backup"
 msgstr "備份之後不回捲磁帶"
 
-#: standalone/drakbackup:1862
+#: standalone/drakbackup:1864
 #, c-format
 msgid "Erase tape before backup"
 msgstr "使用磁帶進行備份"
 
-#: standalone/drakbackup:1868
+#: standalone/drakbackup:1870
 #, fuzzy, c-format
 msgid "Eject tape after the backup"
 msgstr "使用磁帶進行備份"
 
-#: standalone/drakbackup:1944
+#: standalone/drakbackup:1946
 #, c-format
 msgid "Enter the directory to save to:"
 msgstr "請輸入您要儲存的目錄名稱："
 
-#: standalone/drakbackup:1948
+#: standalone/drakbackup:1950
 #, fuzzy, c-format
 msgid "Directory to save to"
 msgstr "請輸入您要儲存的目錄名稱："
 
-#: standalone/drakbackup:1953
+#: standalone/drakbackup:1955
 #, c-format
 msgid ""
 "Maximum disk space\n"
 " allocated for backups (MB)"
 msgstr ""
 
-#: standalone/drakbackup:1957
+#: standalone/drakbackup:1959
 #, c-format
 msgid ""
 "Delete incremental or differential\n"
@@ -17858,187 +17862,187 @@ msgid ""
 " (0 is keep all backups) to save space"
 msgstr ""
 
-#: standalone/drakbackup:2024
+#: standalone/drakbackup:2026
 #, c-format
 msgid "CD-R / DVD-R"
 msgstr "CDROM / DVDROM"
 
-#: standalone/drakbackup:2029
+#: standalone/drakbackup:2031
 #, c-format
 msgid "HardDrive / NFS"
 msgstr "硬碟 / NFS"
 
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
+#: standalone/drakbackup:2046 standalone/drakbackup:2047
+#: standalone/drakbackup:2052
 #, c-format
 msgid "hourly"
 msgstr "每小時"
 
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
+#: standalone/drakbackup:2046 standalone/drakbackup:2048
+#: standalone/drakbackup:2053
 #, c-format
 msgid "daily"
 msgstr "每天"
 
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
+#: standalone/drakbackup:2046 standalone/drakbackup:2049
+#: standalone/drakbackup:2054
 #, c-format
 msgid "weekly"
 msgstr "每週"
 
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
+#: standalone/drakbackup:2046 standalone/drakbackup:2050
+#: standalone/drakbackup:2055
 #, c-format
 msgid "monthly"
 msgstr "每月"
 
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
+#: standalone/drakbackup:2046 standalone/drakbackup:2051
+#: standalone/drakbackup:2056
 #, c-format
 msgid "custom"
 msgstr "自訂"
 
-#: standalone/drakbackup:2058
+#: standalone/drakbackup:2060
 #, c-format
 msgid "January"
 msgstr "1月"
 
-#: standalone/drakbackup:2058
+#: standalone/drakbackup:2060
 #, c-format
 msgid "February"
 msgstr "2月"
 
-#: standalone/drakbackup:2058
+#: standalone/drakbackup:2060
 #, c-format
 msgid "March"
 msgstr "3月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "April"
 msgstr "4月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "May"
 msgstr "5月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "June"
 msgstr "6月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "July"
 msgstr "7月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "August"
 msgstr "8月"
 
-#: standalone/drakbackup:2059
+#: standalone/drakbackup:2061
 #, c-format
 msgid "September"
 msgstr "9月"
 
-#: standalone/drakbackup:2060
+#: standalone/drakbackup:2062
 #, c-format
 msgid "October"
 msgstr "10月"
 
-#: standalone/drakbackup:2060
+#: standalone/drakbackup:2062
 #, c-format
 msgid "November"
 msgstr "11月"
 
-#: standalone/drakbackup:2060
+#: standalone/drakbackup:2062
 #, c-format
 msgid "December"
 msgstr "12月"
 
-#: standalone/drakbackup:2063
+#: standalone/drakbackup:2065
 #, c-format
 msgid "Sunday"
 msgstr "星期日"
 
-#: standalone/drakbackup:2063
+#: standalone/drakbackup:2065
 #, c-format
 msgid "Monday"
 msgstr "星期一"
 
-#: standalone/drakbackup:2063
+#: standalone/drakbackup:2065
 #, c-format
 msgid "Tuesday"
 msgstr "星期二"
 
-#: standalone/drakbackup:2064
+#: standalone/drakbackup:2066
 #, c-format
 msgid "Wednesday"
 msgstr "星期三"
 
-#: standalone/drakbackup:2064
+#: standalone/drakbackup:2066
 #, c-format
 msgid "Thursday"
 msgstr "星期四"
 
-#: standalone/drakbackup:2064
+#: standalone/drakbackup:2066
 #, c-format
 msgid "Friday"
 msgstr "星期五"
 
-#: standalone/drakbackup:2064
+#: standalone/drakbackup:2066
 #, c-format
 msgid "Saturday"
 msgstr "星期六"
 
-#: standalone/drakbackup:2096
+#: standalone/drakbackup:2098
 #, c-format
 msgid "Use daemon"
 msgstr "使用排程程式"
 
-#: standalone/drakbackup:2100
+#: standalone/drakbackup:2102
 #, c-format
 msgid "Please choose the time interval between each backup"
 msgstr "請輸入每一次備份的間隔時間"
 
-#: standalone/drakbackup:2106
+#: standalone/drakbackup:2108
 #, c-format
 msgid "Custom setup/crontab entry:"
 msgstr ""
 
-#: standalone/drakbackup:2111
+#: standalone/drakbackup:2113
 #, c-format
 msgid "Minute"
 msgstr "分"
 
-#: standalone/drakbackup:2115
+#: standalone/drakbackup:2117
 #, c-format
 msgid "Hour"
 msgstr "時"
 
-#: standalone/drakbackup:2119
+#: standalone/drakbackup:2121
 #, c-format
 msgid "Day"
 msgstr "天"
 
-#: standalone/drakbackup:2123
+#: standalone/drakbackup:2125
 #, c-format
 msgid "Month"
 msgstr "月"
 
-#: standalone/drakbackup:2127
+#: standalone/drakbackup:2129
 #, fuzzy, c-format
 msgid "Weekday"
 msgstr "星期三"
 
-#: standalone/drakbackup:2133
+#: standalone/drakbackup:2135
 #, fuzzy, c-format
 msgid "Please choose the media for backup."
 msgstr "請選擇要用來備份的裝置"
 
-#: standalone/drakbackup:2139
+#: standalone/drakbackup:2141
 #, fuzzy, c-format
 msgid "Please be sure that the cron daemon is included in your services."
 msgstr ""
@@ -18046,13 +18050,13 @@ msgstr ""
 "\n"
 "請注意目前所有 '網路' 媒介都會使用硬碟。"
 
-#: standalone/drakbackup:2140
+#: standalone/drakbackup:2142
 #, c-format
 msgid ""
 "If your machine is not on all the time, you might want to install anacron."
 msgstr ""
 
-#: standalone/drakbackup:2141
+#: standalone/drakbackup:2143
 #, fuzzy, c-format
 msgid "Note that currently all 'net' media also use the hard drive."
 msgstr ""
@@ -18060,122 +18064,122 @@ msgstr ""
 "\n"
 "請注意目前所有 '網路' 媒介都會使用硬碟。"
 
-#: standalone/drakbackup:2188
+#: standalone/drakbackup:2190
 #, fuzzy, c-format
 msgid "Please choose the compression type"
 msgstr "請選取要回存的日期"
 
-#: standalone/drakbackup:2192
+#: standalone/drakbackup:2194
 #, fuzzy, c-format
 msgid "Use .backupignore files"
 msgstr "備份檔案啟用最大容量配給限制。"
 
-#: standalone/drakbackup:2194
+#: standalone/drakbackup:2196
 #, c-format
 msgid "Send mail report after each backup to:"
 msgstr "在每次備份完成後發送郵件通知該使用者："
 
-#: standalone/drakbackup:2200
+#: standalone/drakbackup:2202
 #, c-format
 msgid "Return address for sent mail:"
 msgstr ""
 
-#: standalone/drakbackup:2206
+#: standalone/drakbackup:2208
 #, c-format
 msgid "SMTP server for mail:"
 msgstr "電子郵件 SMTP 伺服器名稱：”"
 
-#: standalone/drakbackup:2211
+#: standalone/drakbackup:2213
 #, c-format
 msgid "Delete Hard Drive tar files after backup to other media."
 msgstr "備份成功後刪除硬碟上的 tar 檔案"
 
-#: standalone/drakbackup:2254
+#: standalone/drakbackup:2256
 #, c-format
 msgid "What"
 msgstr "備份項目設定"
 
-#: standalone/drakbackup:2259
+#: standalone/drakbackup:2261
 #, c-format
 msgid "Where"
 msgstr "備份儲存位置設定"
 
-#: standalone/drakbackup:2264
+#: standalone/drakbackup:2266
 #, c-format
 msgid "When"
 msgstr "備份時間設定"
 
-#: standalone/drakbackup:2269
+#: standalone/drakbackup:2271
 #, c-format
 msgid "More Options"
 msgstr "更多選項"
 
-#: standalone/drakbackup:2282
+#: standalone/drakbackup:2284
 #, c-format
 msgid "Backup destination not configured..."
 msgstr "備份功能尚未設定..."
 
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
+#: standalone/drakbackup:2304 standalone/drakbackup:4228
 #, c-format
 msgid "Drakbackup Configuration"
 msgstr "Drakbackup 組態"
 
-#: standalone/drakbackup:2318
+#: standalone/drakbackup:2320
 #, c-format
 msgid "Please choose where you want to backup"
 msgstr "請選取您要備份的項目"
 
-#: standalone/drakbackup:2321
+#: standalone/drakbackup:2323
 #, fuzzy, c-format
 msgid "Hard Drive used to prepare backups for all media"
 msgstr "備份成功後刪除硬碟上的 tar 檔案"
 
-#: standalone/drakbackup:2321
+#: standalone/drakbackup:2323
 #, c-format
 msgid "Across Network"
 msgstr "透過網路"
 
-#: standalone/drakbackup:2321
+#: standalone/drakbackup:2323
 #, c-format
 msgid "On CD-R"
 msgstr "於 CD-R 裝置"
 
-#: standalone/drakbackup:2321
+#: standalone/drakbackup:2323
 #, c-format
 msgid "On Tape Device"
 msgstr "於磁帶機裝置"
 
-#: standalone/drakbackup:2367
+#: standalone/drakbackup:2369
 #, c-format
 msgid "Backup Users"
 msgstr "備份使用者資料"
 
-#: standalone/drakbackup:2368
+#: standalone/drakbackup:2370
 #, fuzzy, c-format
 msgid " (Default is all users)"
 msgstr "預設印表機"
 
-#: standalone/drakbackup:2381
+#: standalone/drakbackup:2383
 #, c-format
 msgid "Please choose what you want to backup"
 msgstr "請選取您要備份的項目"
 
-#: standalone/drakbackup:2382
+#: standalone/drakbackup:2384
 #, c-format
 msgid "Backup System"
 msgstr "備份系統資料"
 
-#: standalone/drakbackup:2384
+#: standalone/drakbackup:2386
 #, c-format
 msgid "Select user manually"
 msgstr "手動選取使用者"
 
-#: standalone/drakbackup:2413
+#: standalone/drakbackup:2415
 #, c-format
 msgid "Please select data to backup..."
 msgstr "請選擇用來備份資料的裝置..."
 
-#: standalone/drakbackup:2485
+#: standalone/drakbackup:2487
 #, c-format
 msgid ""
 "\n"
@@ -18184,7 +18188,7 @@ msgstr ""
 "\n"
 "備份來源檔：\n"
 
-#: standalone/drakbackup:2486
+#: standalone/drakbackup:2488
 #, c-format
 msgid ""
 "\n"
@@ -18193,7 +18197,7 @@ msgstr ""
 "\n"
 "- 系統檔案：\n"
 
-#: standalone/drakbackup:2488
+#: standalone/drakbackup:2490
 #, c-format
 msgid ""
 "\n"
@@ -18202,7 +18206,7 @@ msgstr ""
 "\n"
 "- 使用者檔案：\n"
 
-#: standalone/drakbackup:2490
+#: standalone/drakbackup:2492
 #, c-format
 msgid ""
 "\n"
@@ -18211,7 +18215,7 @@ msgstr ""
 "\n"
 "- 其他檔案：\n"
 
-#: standalone/drakbackup:2492
+#: standalone/drakbackup:2494
 #, c-format
 msgid ""
 "\n"
@@ -18220,17 +18224,17 @@ msgstr ""
 "\n"
 "- 儲存於硬碟的路徑：%s\n"
 
-#: standalone/drakbackup:2493
+#: standalone/drakbackup:2495
 #, c-format
 msgid "\tLimit disk usage to %s MB\n"
 msgstr "\t限制磁碟使用量為 %s MB\n"
 
-#: standalone/drakbackup:2494
+#: standalone/drakbackup:2496
 #, c-format
 msgid "\tDelete backups older than %s day(s)\n"
 msgstr ""
 
-#: standalone/drakbackup:2497
+#: standalone/drakbackup:2499
 #, c-format
 msgid ""
 "\n"
@@ -18239,7 +18243,7 @@ msgstr ""
 "\n"
 "- 備份完成後刪除硬碟內先前備份的 tar 檔案。\n"
 
-#: standalone/drakbackup:2502
+#: standalone/drakbackup:2504
 #, c-format
 msgid ""
 "\n"
@@ -18248,22 +18252,22 @@ msgstr ""
 "\n"
 "- 燒錄到 CD 片"
 
-#: standalone/drakbackup:2503
+#: standalone/drakbackup:2505
 #, c-format
 msgid "RW"
 msgstr "讀寫"
 
-#: standalone/drakbackup:2504
+#: standalone/drakbackup:2506
 #, c-format
 msgid " on device: %s"
 msgstr " 位於位置: %s"
 
-#: standalone/drakbackup:2505
+#: standalone/drakbackup:2507
 #, c-format
 msgid " (multi-session)"
 msgstr ""
 
-#: standalone/drakbackup:2506
+#: standalone/drakbackup:2508
 #, c-format
 msgid ""
 "\n"
@@ -18272,17 +18276,17 @@ msgstr ""
 "\n"
 "- 儲存於該磁帶機裝置：%s"
 
-#: standalone/drakbackup:2507
+#: standalone/drakbackup:2509
 #, c-format
 msgid "\t\tErase=%s"
 msgstr "\t\t刪除=%s"
 
-#: standalone/drakbackup:2509
+#: standalone/drakbackup:2511
 #, c-format
 msgid "\tBackup directly to Tape\n"
 msgstr "\t將目錄備份到磁帶中\n"
 
-#: standalone/drakbackup:2511
+#: standalone/drakbackup:2513
 #, c-format
 msgid ""
 "\n"
@@ -18291,7 +18295,7 @@ msgstr ""
 "\n"
 "- 儲存 %s 於站台 - %s\n"
 
-#: standalone/drakbackup:2512
+#: standalone/drakbackup:2514
 #, c-format
 msgid ""
 "\t\t user name: %s\n"
@@ -18300,7 +18304,7 @@ msgstr ""
 "\t\t 使用者名稱: %s\n"
 "\t\t 位於路徑: %s \n"
 
-#: standalone/drakbackup:2513
+#: standalone/drakbackup:2515
 #, c-format
 msgid ""
 "\n"
@@ -18309,47 +18313,47 @@ msgstr ""
 "\n"
 "- 選項:\n"
 
-#: standalone/drakbackup:2514
+#: standalone/drakbackup:2516
 #, c-format
 msgid "\tDo not include System Files\n"
 msgstr "\t不要包含系統檔案\n"
 
-#: standalone/drakbackup:2516
+#: standalone/drakbackup:2518
 #, c-format
 msgid "\tBackups use tar and bzip2\n"
 msgstr "\t使用 tar 與 bzip2 進行備份\n"
 
-#: standalone/drakbackup:2517
+#: standalone/drakbackup:2519
 #, c-format
 msgid "\tBackups use tar and gzip\n"
 msgstr "\t使用 tar 與 gzip 進行備份\n"
 
-#: standalone/drakbackup:2518
+#: standalone/drakbackup:2520
 #, fuzzy, c-format
 msgid "\tBackups use tar only\n"
 msgstr "\t使用 tar 與 gzip 進行備份\n"
 
-#: standalone/drakbackup:2520
+#: standalone/drakbackup:2522
 #, c-format
 msgid "\tUse .backupignore files\n"
 msgstr "\t使用.backupignore 檔案\n"
 
-#: standalone/drakbackup:2521
+#: standalone/drakbackup:2523
 #, c-format
 msgid "\tSend mail to %s\n"
 msgstr "\t傳送郵件給 %s\n"
 
-#: standalone/drakbackup:2522
+#: standalone/drakbackup:2524
 #, c-format
 msgid "\tSend mail from %s\n"
 msgstr ""
 
-#: standalone/drakbackup:2523
+#: standalone/drakbackup:2525
 #, c-format
 msgid "\tUsing SMTP server %s\n"
 msgstr "\t使用 SMTP 伺服器 %s\n"
 
-#: standalone/drakbackup:2525
+#: standalone/drakbackup:2527
 #, c-format
 msgid ""
 "\n"
@@ -18358,42 +18362,42 @@ msgstr ""
 "\n"
 "- Daemon (%s) 服務程式包含 :\n"
 
-#: standalone/drakbackup:2526
+#: standalone/drakbackup:2528
 #, c-format
 msgid "\t-Hard drive.\n"
 msgstr "\t-硬碟\n"
 
-#: standalone/drakbackup:2527
+#: standalone/drakbackup:2529
 #, c-format
 msgid "\t-CD-R.\n"
 msgstr "\t-光碟機\n"
 
-#: standalone/drakbackup:2528
+#: standalone/drakbackup:2530
 #, c-format
 msgid "\t-Tape \n"
 msgstr "\t-磁帶機\n"
 
-#: standalone/drakbackup:2529
+#: standalone/drakbackup:2531
 #, c-format
 msgid "\t-Network by FTP.\n"
 msgstr "\t-網路 (透過 FTP)\n"
 
-#: standalone/drakbackup:2530
+#: standalone/drakbackup:2532
 #, c-format
 msgid "\t-Network by SSH.\n"
 msgstr "\t網路 (透過 SSH)\n"
 
-#: standalone/drakbackup:2531
+#: standalone/drakbackup:2533
 #, c-format
 msgid "\t-Network by rsync.\n"
 msgstr "\t-網路 (透過 rsync)\n"
 
-#: standalone/drakbackup:2533
+#: standalone/drakbackup:2535
 #, c-format
 msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr "尚未設定任何組態項目, 請點選巫師或者是進階模式建立之。\n"
 
-#: standalone/drakbackup:2538
+#: standalone/drakbackup:2540
 #, c-format
 msgid ""
 "List of data to restore:\n"
@@ -18402,33 +18406,33 @@ msgstr ""
 "要回存的資料清單:\n"
 "\n"
 
-#: standalone/drakbackup:2540
+#: standalone/drakbackup:2542
 #, fuzzy, c-format
 msgid "- Restore System Files.\n"
 msgstr ""
 "\n"
 "- 系統檔案:\n"
 
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
+#: standalone/drakbackup:2544 standalone/drakbackup:2554
 #, c-format
 msgid "   - from date: %s %s\n"
 msgstr ""
 
-#: standalone/drakbackup:2545
+#: standalone/drakbackup:2547
 #, fuzzy, c-format
 msgid "- Restore User Files: \n"
 msgstr ""
 "\n"
 "- 使用者檔案:\n"
 
-#: standalone/drakbackup:2550
+#: standalone/drakbackup:2552
 #, fuzzy, c-format
 msgid "- Restore Other Files: \n"
 msgstr ""
 "\n"
 "- 其他檔案:\n"
 
-#: standalone/drakbackup:2729
+#: standalone/drakbackup:2731
 #, c-format
 msgid ""
 "List of data corrupted:\n"
@@ -18437,143 +18441,143 @@ msgstr ""
 "毀損的資料檔案清單:\n"
 "\n"
 
-#: standalone/drakbackup:2731
+#: standalone/drakbackup:2733
 #, c-format
 msgid "Please uncheck or remove it on next time."
 msgstr "下一次請取消或者是移除該項目。"
 
-#: standalone/drakbackup:2741
+#: standalone/drakbackup:2743
 #, c-format
 msgid "Backup files are corrupted"
 msgstr "備份的檔案已經毀損"
 
-#: standalone/drakbackup:2762
+#: standalone/drakbackup:2764
 #, c-format
 msgid "          All of your selected data have been          "
 msgstr "          您所選取的所有資料已經                       "
 
-#: standalone/drakbackup:2763
+#: standalone/drakbackup:2765
 #, c-format
 msgid "          Successfully Restored on %s       "
 msgstr "          成功回存到 %s                    "
 
-#: standalone/drakbackup:2883
+#: standalone/drakbackup:2885
 #, c-format
 msgid "         Restore Configuration       "
 msgstr "         回存組態設定       "
 
-#: standalone/drakbackup:2911
+#: standalone/drakbackup:2913
 #, c-format
 msgid "OK to restore the other files."
 msgstr "選取 OK 來回存其他檔案。"
 
-#: standalone/drakbackup:2927
+#: standalone/drakbackup:2929
 #, c-format
 msgid "User list to restore (only the most recent date per user is important)"
 msgstr "回存的使用者清單 (只有回存最近使用者重要的檔案)"
 
-#: standalone/drakbackup:2992
+#: standalone/drakbackup:2994
 #, fuzzy, c-format
 msgid "Please choose the date to restore:"
 msgstr "請選取要回存的日期"
 
-#: standalone/drakbackup:3029
+#: standalone/drakbackup:3031
 #, c-format
 msgid "Restore from Hard Disk."
 msgstr "由硬碟回存。"
 
-#: standalone/drakbackup:3031
+#: standalone/drakbackup:3033
 #, fuzzy, c-format
 msgid "Enter the directory where backups are stored"
 msgstr "請輸入備份資料所要回存的目錄"
 
-#: standalone/drakbackup:3035
+#: standalone/drakbackup:3037
 #, fuzzy, c-format
 msgid "Directory with backups"
 msgstr "回存所有備份資料"
 
-#: standalone/drakbackup:3089
+#: standalone/drakbackup:3091
 #, c-format
 msgid "Select another media to restore from"
 msgstr "請選取要用來回存資料的裝置來源"
 
-#: standalone/drakbackup:3091
+#: standalone/drakbackup:3093
 #, c-format
 msgid "Other Media"
 msgstr "其他裝置"
 
-#: standalone/drakbackup:3096
+#: standalone/drakbackup:3098
 #, c-format
 msgid "Restore system"
 msgstr "回存系統"
 
-#: standalone/drakbackup:3097
+#: standalone/drakbackup:3099
 #, c-format
 msgid "Restore Users"
 msgstr "回存使用者檔案"
 
-#: standalone/drakbackup:3098
+#: standalone/drakbackup:3100
 #, c-format
 msgid "Restore Other"
 msgstr "回存其他檔案"
 
-#: standalone/drakbackup:3100
+#: standalone/drakbackup:3102
 #, c-format
 msgid "Select path to restore (instead of /)"
 msgstr "選擇要回存的路徑名稱 (代替預設的 /)"
 
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
+#: standalone/drakbackup:3106 standalone/drakbackup:3388
 #, fuzzy, c-format
 msgid "Path To Restore To"
 msgstr "自訂回存方式"
 
-#: standalone/drakbackup:3107
+#: standalone/drakbackup:3109
 #, c-format
 msgid "Do new backup before restore (only for incremental backups.)"
 msgstr "在回存前進行新的備份動作 (只能夠用在遞增式備份時.)"
 
-#: standalone/drakbackup:3109
+#: standalone/drakbackup:3111
 #, c-format
 msgid "Remove user directories before restore."
 msgstr "在回存資料時先刪除使用者的相關目錄"
 
-#: standalone/drakbackup:3194
+#: standalone/drakbackup:3196
 #, c-format
 msgid "Filename text substring to search for (empty string matches all):"
 msgstr ""
 
-#: standalone/drakbackup:3197
+#: standalone/drakbackup:3199
 #, c-format
 msgid "Search Backups"
 msgstr "搜尋備份"
 
-#: standalone/drakbackup:3215
+#: standalone/drakbackup:3217
 #, c-format
 msgid "No matches found..."
 msgstr "找不到符合的..."
 
-#: standalone/drakbackup:3219
+#: standalone/drakbackup:3221
 #, fuzzy, c-format
 msgid "Restore Selected"
 msgstr ""
 "回存選取項目\n"
 "檔案"
 
-#: standalone/drakbackup:3354
+#: standalone/drakbackup:3356
 #, c-format
 msgid ""
 "Click date/time to see backup files.\n"
 "Ctrl-Click files to select multiple files."
 msgstr ""
 
-#: standalone/drakbackup:3360
+#: standalone/drakbackup:3362
 #, c-format
 msgid ""
 "Restore Selected\n"
 "Catalog Entry"
 msgstr ""
 
-#: standalone/drakbackup:3369
+#: standalone/drakbackup:3371
 #, c-format
 msgid ""
 "Restore Selected\n"
@@ -18582,17 +18586,17 @@ msgstr ""
 "回存選取項目\n"
 "檔案"
 
-#: standalone/drakbackup:3446
+#: standalone/drakbackup:3448
 #, c-format
 msgid "Backup files not found at %s."
 msgstr "備份檔案找不到 - %s。"
 
-#: standalone/drakbackup:3459
+#: standalone/drakbackup:3461
 #, c-format
 msgid "Restore From CD"
 msgstr "使用光碟片回存"
 
-#: standalone/drakbackup:3459
+#: standalone/drakbackup:3461
 #, c-format
 msgid ""
 "Insert the CD with volume label %s\n"
@@ -18601,17 +18605,17 @@ msgstr ""
 "請置入標籤名稱為 %s 的 CD 片到光碟機內\n"
 "(掛載點為 /mnt/cdrom)"
 
-#: standalone/drakbackup:3461
+#: standalone/drakbackup:3463
 #, c-format
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr "不正確的 CD 片標籤, 磁碟標籤名稱為 %s。"
 
-#: standalone/drakbackup:3471
+#: standalone/drakbackup:3473
 #, c-format
 msgid "Restore From Tape"
 msgstr "使用磁帶回存"
 
-#: standalone/drakbackup:3471
+#: standalone/drakbackup:3473
 #, c-format
 msgid ""
 "Insert the tape with volume label %s\n"
@@ -18620,212 +18624,212 @@ msgstr ""
 "請置入標籤名稱為 %s 的磁帶\n"
 "到 %s 磁帶機內"
 
-#: standalone/drakbackup:3473
+#: standalone/drakbackup:3475
 #, c-format
 msgid "Not the correct tape label. Tape is labelled %s."
 msgstr "不正確的磁帶標籤, 磁帶標籤為 %s。"
 
-#: standalone/drakbackup:3484
+#: standalone/drakbackup:3486
 #, c-format
 msgid "Restore Via Network"
 msgstr "使用網路回存檔案"
 
-#: standalone/drakbackup:3484
+#: standalone/drakbackup:3486
 #, c-format
 msgid "Restore Via Network Protocol: %s"
 msgstr "網路回存使用的協定：%s"
 
-#: standalone/drakbackup:3485
+#: standalone/drakbackup:3487
 #, c-format
 msgid "Host Name"
 msgstr "主機名稱"
 
-#: standalone/drakbackup:3486
+#: standalone/drakbackup:3488
 #, c-format
 msgid "Host Path or Module"
 msgstr "主機路徑或是模組名稱"
 
-#: standalone/drakbackup:3493
+#: standalone/drakbackup:3495
 #, c-format
 msgid "Password required"
 msgstr "需要輸入密碼"
 
-#: standalone/drakbackup:3499
+#: standalone/drakbackup:3501
 #, c-format
 msgid "Username required"
 msgstr "需要輸入帳號名稱"
 
-#: standalone/drakbackup:3502
+#: standalone/drakbackup:3504
 #, c-format
 msgid "Hostname required"
 msgstr "需要輸入主機名稱"
 
-#: standalone/drakbackup:3507
+#: standalone/drakbackup:3509
 #, c-format
 msgid "Path or Module required"
 msgstr "需要輸入路徑或是模組名稱"
 
-#: standalone/drakbackup:3520
+#: standalone/drakbackup:3522
 #, c-format
 msgid "Files Restored..."
 msgstr "要回存的檔案..."
 
-#: standalone/drakbackup:3523
+#: standalone/drakbackup:3525
 #, c-format
 msgid "Restore Failed..."
 msgstr "回存失敗..."
 
-#: standalone/drakbackup:3541
+#: standalone/drakbackup:3543
 #, fuzzy, c-format
 msgid "%s not retrieved..."
 msgstr "%s 沒有正常回應"
 
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
+#: standalone/drakbackup:3764 standalone/drakbackup:3833
 #, c-format
 msgid "Search for files to restore"
 msgstr "搜尋檔案來回存"
 
-#: standalone/drakbackup:3766
+#: standalone/drakbackup:3768
 #, c-format
 msgid "Restore all backups"
 msgstr "回存所有備份資料"
 
-#: standalone/drakbackup:3774
+#: standalone/drakbackup:3776
 #, c-format
 msgid "Custom Restore"
 msgstr "自訂回存方式"
 
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
+#: standalone/drakbackup:3780 standalone/drakbackup:3829
 #, c-format
 msgid "Restore From Catalog"
 msgstr "使用型錄回存"
 
-#: standalone/drakbackup:3799
+#: standalone/drakbackup:3801
 #, c-format
 msgid "Unable to find backups to restore...\n"
 msgstr "無法找到備份以回存...\n"
 
-#: standalone/drakbackup:3800
+#: standalone/drakbackup:3802
 #, fuzzy, c-format
 msgid "Verify that %s is the correct path"
 msgstr "這樣子正確嗎？"
 
-#: standalone/drakbackup:3801
+#: standalone/drakbackup:3803
 #, c-format
 msgid " and the CD is in the drive"
 msgstr ""
 
-#: standalone/drakbackup:3803
+#: standalone/drakbackup:3805
 #, c-format
 msgid "Backups on unmountable media - Use Catalog to restore"
 msgstr ""
 
-#: standalone/drakbackup:3819
+#: standalone/drakbackup:3821
 #, c-format
 msgid "CD in place - continue."
 msgstr "CD 片就緒 - 繼續執行。"
 
-#: standalone/drakbackup:3824
+#: standalone/drakbackup:3826
 #, c-format
 msgid "Browse to new restore repository."
 msgstr ""
 
-#: standalone/drakbackup:3825
+#: standalone/drakbackup:3827
 #, fuzzy, c-format
 msgid "Directory To Restore From"
 msgstr "使用光碟片回存"
 
-#: standalone/drakbackup:3861
+#: standalone/drakbackup:3863
 #, c-format
 msgid "Restore Progress"
 msgstr "回存進度"
 
-#: standalone/drakbackup:3972
+#: standalone/drakbackup:3974
 #, c-format
 msgid "Build Backup"
 msgstr "建立備份"
 
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
+#: standalone/drakbackup:4007 standalone/drakbackup:4327
 #, c-format
 msgid "Restore"
 msgstr "回存"
 
-#: standalone/drakbackup:4093 standalone/harddrake2:477
+#: standalone/drakbackup:4095 standalone/harddrake2:478
 #, fuzzy, c-format
 msgid "The following packages need to be installed:\n"
 msgstr "下列的套件將會被安裝上"
 
-#: standalone/drakbackup:4120
+#: standalone/drakbackup:4122
 #, c-format
 msgid "Please select data to restore..."
 msgstr "請選取要回存的資料..."
 
-#: standalone/drakbackup:4160
+#: standalone/drakbackup:4162
 #, c-format
 msgid "Backup system files"
 msgstr "備份系統檔案"
 
-#: standalone/drakbackup:4163
+#: standalone/drakbackup:4165
 #, c-format
 msgid "Backup user files"
 msgstr "備份使用者檔案"
 
-#: standalone/drakbackup:4166
+#: standalone/drakbackup:4168
 #, c-format
 msgid "Backup other files"
 msgstr "備份其他檔案"
 
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
+#: standalone/drakbackup:4171 standalone/drakbackup:4205
 #, c-format
 msgid "Total Progress"
 msgstr "全部進度"
 
-#: standalone/drakbackup:4195
+#: standalone/drakbackup:4197
 #, fuzzy, c-format
 msgid "Sending files by FTP"
 msgstr "正在送出檔案..."
 
-#: standalone/drakbackup:4198
+#: standalone/drakbackup:4200
 #, c-format
 msgid "Sending files..."
 msgstr "正在送出檔案..."
 
-#: standalone/drakbackup:4268
+#: standalone/drakbackup:4270
 #, c-format
 msgid "Backup Now from configuration file"
 msgstr "依據目前組態設定開始備份"
 
-#: standalone/drakbackup:4273
+#: standalone/drakbackup:4275
 #, c-format
 msgid "View Backup Configuration."
 msgstr "檢視備份組態設定"
 
-#: standalone/drakbackup:4299
+#: standalone/drakbackup:4301
 #, c-format
 msgid "Wizard Configuration"
 msgstr "精靈設定模式"
 
-#: standalone/drakbackup:4304
+#: standalone/drakbackup:4306
 #, c-format
 msgid "Advanced Configuration"
 msgstr "進階設定"
 
-#: standalone/drakbackup:4309
+#: standalone/drakbackup:4311
 #, fuzzy, c-format
 msgid "View Configuration"
 msgstr "組態設定"
 
-#: standalone/drakbackup:4313
+#: standalone/drakbackup:4315
 #, c-format
 msgid "View Last Log"
 msgstr "查看最新紀錄"
 
-#: standalone/drakbackup:4318
+#: standalone/drakbackup:4320
 #, c-format
 msgid "Backup Now"
 msgstr "立即備份"
 
-#: standalone/drakbackup:4322
+#: standalone/drakbackup:4324
 #, c-format
 msgid ""
 "No configuration file found \n"
@@ -18834,26 +18838,26 @@ msgstr ""
 "尚未產生組態設定檔案, 請點選\n"
 "巫師或者是進階模式建立之。"
 
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
+#: standalone/drakbackup:4344 standalone/drakbackup:4347
 #, c-format
 msgid "Drakbackup"
 msgstr "Drakbackup"
 
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
+#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:190
+#: standalone/harddrake2:191 standalone/harddrake2:192 standalone/logdrake:69
 #: standalone/printerdrake:138 standalone/printerdrake:139
 #: standalone/printerdrake:140
 #, c-format
 msgid "/_File"
 msgstr "/檔案 (_F)"
 
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
+#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:75
 #, c-format
 msgid "/File/_Quit"
 msgstr "/檔案 (F)/結束 (_Q)"
 
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
+#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:192
+#: standalone/logdrake:75 standalone/printerdrake:140
 #, c-format
 msgid "<control>Q"
 msgstr "<control>Q"
@@ -18861,7 +18865,7 @@ msgstr "<control>Q"
 #: standalone/drakboot:117
 #, c-format
 msgid "Text only"
-msgstr ""
+msgstr "只顯示文字"
 
 #: standalone/drakboot:118
 #, c-format
@@ -18871,7 +18875,7 @@ msgstr ""
 #: standalone/drakboot:119
 #, c-format
 msgid "Silent"
-msgstr ""
+msgstr "靜音"
 
 #: standalone/drakboot:126
 #, c-format
@@ -19150,188 +19154,188 @@ msgid ""
 "Do you want to install ntp?"
 msgstr "這個 %s 套件需要安裝上, 您要安裝該套件嗎？"
 
-#: standalone/drakconnect:86
+#: standalone/drakconnect:80
 #, c-format
 msgid "Network configuration (%d adapters)"
 msgstr "網路組態 (%d 介面卡)"
 
-#: standalone/drakconnect:97 standalone/drakconnect:822
+#: standalone/drakconnect:89 standalone/drakconnect:803
 #: standalone/drakroam:163
 #, c-format
 msgid "Gateway:"
 msgstr "閘道器："
 
-#: standalone/drakconnect:97 standalone/drakconnect:822
+#: standalone/drakconnect:89 standalone/drakconnect:803
 #, c-format
 msgid "Interface:"
 msgstr "介面:"
 
-#: standalone/drakconnect:101 standalone/net_monitor:122
+#: standalone/drakconnect:93 standalone/net_monitor:119
 #, c-format
 msgid "Wait please"
 msgstr "請稍後"
 
-#: standalone/drakconnect:117
+#: standalone/drakconnect:109
 #, c-format
 msgid "Interface"
 msgstr "介面"
 
-#: standalone/drakconnect:117 standalone/printerdrake:211
+#: standalone/drakconnect:109 standalone/printerdrake:211
 #: standalone/printerdrake:218
 #, c-format
 msgid "State"
 msgstr "狀態"
 
-#: standalone/drakconnect:134
+#: standalone/drakconnect:126
 #, c-format
 msgid "Hostname: "
 msgstr "主機名稱："
 
-#: standalone/drakconnect:136
+#: standalone/drakconnect:128
 #, c-format
 msgid "Configure hostname..."
 msgstr "設定主機名稱..."
 
-#: standalone/drakconnect:150 standalone/drakconnect:878
+#: standalone/drakconnect:142 standalone/drakconnect:841
 #, c-format
 msgid "LAN configuration"
 msgstr "區域網路設定"
 
-#: standalone/drakconnect:155
+#: standalone/drakconnect:147
 #, c-format
 msgid "Configure Local Area Network..."
 msgstr "設定區域網路..."
 
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
+#: standalone/drakconnect:155 standalone/drakconnect:237
+#: standalone/drakconnect:241
 #, c-format
 msgid "Apply"
 msgstr "套用"
 
-#: standalone/drakconnect:198
+#: standalone/drakconnect:188
 #, c-format
 msgid "Manage connections"
 msgstr "管理連線"
 
-#: standalone/drakconnect:225
+#: standalone/drakconnect:215
 #, fuzzy, c-format
 msgid "Device selected"
 msgstr "移除選取項目"
 
-#: standalone/drakconnect:307
+#: standalone/drakconnect:296
 #, fuzzy, c-format
 msgid "IP configuration"
 msgstr "CUPS 設定組態"
 
-#: standalone/drakconnect:346
+#: standalone/drakconnect:335
 #, fuzzy, c-format
 msgid "DNS servers"
 msgstr "DNS 伺服器"
 
-#: standalone/drakconnect:354
+#: standalone/drakconnect:343
 #, fuzzy, c-format
 msgid "Search Domain"
 msgstr "NIS 域名"
 
-#: standalone/drakconnect:362
+#: standalone/drakconnect:351
 #, fuzzy, c-format
 msgid "static"
 msgstr "自動分配 IP"
 
-#: standalone/drakconnect:362 standalone/drakroam:144
+#: standalone/drakconnect:351 standalone/drakroam:144
 #, c-format
 msgid "DHCP"
 msgstr "DHCP"
 
-#: standalone/drakconnect:526
+#: standalone/drakconnect:515
 #, c-format
 msgid "Flow control"
 msgstr "流量控制"
 
-#: standalone/drakconnect:527
+#: standalone/drakconnect:516
 #, fuzzy, c-format
 msgid "Line termination"
 msgstr "Internet 平台"
 
-#: standalone/drakconnect:538
+#: standalone/drakconnect:527
 #, fuzzy, c-format
 msgid "Modem timeout"
 msgstr "核心啟動時間逾時時間"
 
-#: standalone/drakconnect:542
+#: standalone/drakconnect:531
 #, fuzzy, c-format
 msgid "Use lock file"
 msgstr "選擇檔案"
 
-#: standalone/drakconnect:544
+#: standalone/drakconnect:533
 #, c-format
 msgid "Wait for dialup tone before dialing"
 msgstr ""
 
-#: standalone/drakconnect:547
+#: standalone/drakconnect:536
 #, fuzzy, c-format
 msgid "Busy wait"
 msgstr "科威特"
 
-#: standalone/drakconnect:552
+#: standalone/drakconnect:541
 #, fuzzy, c-format
 msgid "Modem sound"
 msgstr "型號"
 
-#: standalone/drakconnect:553 standalone/drakgw:108
+#: standalone/drakconnect:542 standalone/drakgw:105
 #, c-format
 msgid "Enable"
 msgstr "啟動"
 
-#: standalone/drakconnect:553 standalone/drakgw:108
+#: standalone/drakconnect:542 standalone/drakgw:105
 #, c-format
 msgid "Disable"
 msgstr "不啟用"
 
-#: standalone/drakconnect:604 standalone/harddrake2:49
+#: standalone/drakconnect:593 standalone/harddrake2:50
 #, c-format
 msgid "Media class"
 msgstr "媒介類別"
 
-#: standalone/drakconnect:605 standalone/drakfloppy:136
+#: standalone/drakconnect:594 standalone/drakfloppy:136
 #, c-format
 msgid "Module name"
 msgstr "模組名稱"
 
-#: standalone/drakconnect:606
+#: standalone/drakconnect:595
 #, c-format
 msgid "Mac Address"
 msgstr " MAC 位址"
 
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
+#: standalone/drakconnect:596 standalone/harddrake2:28
+#: standalone/harddrake2:120
 #, c-format
 msgid "Bus"
 msgstr "匯流排"
 
-#: standalone/drakconnect:608 standalone/harddrake2:33
+#: standalone/drakconnect:597 standalone/harddrake2:34
 #, c-format
 msgid "Location on the bus"
 msgstr "匯流排上的位置"
 
-#: standalone/drakconnect:707 standalone/drakgw:325 standalone/drakpxe:138
+#: standalone/drakconnect:696 standalone/drakgw:322
 #, c-format
 msgid ""
 "No ethernet network adapter has been detected on your system. Please run the "
 "hardware configuration tool."
 msgstr "您系統偵測不到有網路卡的存在，請重新執行硬體設定工具。"
 
-#: standalone/drakconnect:715
+#: standalone/drakconnect:704
 #, fuzzy, c-format
 msgid "Remove a network interface"
 msgstr "選取網路介面"
 
-#: standalone/drakconnect:719
+#: standalone/drakconnect:708
 #, fuzzy, c-format
 msgid "Select the network interface to remove:"
 msgstr "選取網路介面"
 
-#: standalone/drakconnect:751
+#: standalone/drakconnect:740
 #, fuzzy, c-format
 msgid ""
 "An error occurred while deleting the \"%s\" network interface:\n"
@@ -19342,70 +19346,63 @@ msgstr ""
 "\n"
 "%s"
 
-#: standalone/drakconnect:752
+#: standalone/drakconnect:741
 #, c-format
 msgid ""
 "Congratulations, the \"%s\" network interface has been successfully deleted"
 msgstr ""
 
-#: standalone/drakconnect:768
+#: standalone/drakconnect:757
 #, c-format
 msgid "No IP"
 msgstr "沒有 IP"
 
-#: standalone/drakconnect:769
+#: standalone/drakconnect:758
 #, c-format
 msgid "No Mask"
 msgstr "沒有遮罩"
 
-#: standalone/drakconnect:770 standalone/drakconnect:949
+#: standalone/drakconnect:759 standalone/drakconnect:912
 #, c-format
 msgid "up"
 msgstr ""
 
-#: standalone/drakconnect:770 standalone/drakconnect:949
+#: standalone/drakconnect:759 standalone/drakconnect:912
 #, fuzzy, c-format
 msgid "down"
 msgstr "完成"
 
-#: standalone/drakconnect:812 standalone/net_monitor:471
+#: standalone/drakconnect:794 standalone/net_monitor:468
 #, c-format
 msgid "Connected"
 msgstr "已連線"
 
-#: standalone/drakconnect:812 standalone/net_monitor:471
+#: standalone/drakconnect:794 standalone/net_monitor:468
 #, c-format
 msgid "Not connected"
 msgstr "尚未連線"
 
-#: standalone/drakconnect:814
+#: standalone/drakconnect:796
 #, c-format
 msgid "Disconnect..."
 msgstr "斷線..."
 
-#: standalone/drakconnect:814
+#: standalone/drakconnect:796
 #, c-format
 msgid "Connect..."
 msgstr "連線..."
 
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "警告，偵測到其他的網路連線，也許對方正在使用您的網路"
-
-#: standalone/drakconnect:874
+#: standalone/drakconnect:837
 #, c-format
 msgid "Deactivate now"
 msgstr "立即關閉"
 
-#: standalone/drakconnect:874
+#: standalone/drakconnect:837
 #, c-format
 msgid "Activate now"
 msgstr "立即啟動"
 
-#: standalone/drakconnect:882
+#: standalone/drakconnect:845
 #, c-format
 msgid ""
 "You do not have any configured interface.\n"
@@ -19414,34 +19411,34 @@ msgstr ""
 "您還沒有任何已經設定好的網路介面。\n"
 "請點選設定來進行網路介面設定動作"
 
-#: standalone/drakconnect:896
+#: standalone/drakconnect:859
 #, c-format
 msgid "LAN Configuration"
 msgstr "區域網路設定"
 
-#: standalone/drakconnect:908
+#: standalone/drakconnect:871
 #, c-format
 msgid "Adapter %s: %s"
 msgstr "介面卡 %s： %s"
 
-#: standalone/drakconnect:917
+#: standalone/drakconnect:880
 #, c-format
 msgid "Boot Protocol"
 msgstr "通訊協定"
 
-#: standalone/drakconnect:918
+#: standalone/drakconnect:881
 #, c-format
 msgid "Started on boot"
 msgstr "於開機時啟動"
 
-#: standalone/drakconnect:954
+#: standalone/drakconnect:917
 #, fuzzy, c-format
 msgid ""
 "This interface has not been configured yet.\n"
 "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
 msgstr "網路介面尚未設定, 請執行設定巫師"
 
-#: standalone/drakconnect:1009 standalone/net_applet:61
+#: standalone/drakconnect:971 standalone/net_applet:59
 #, c-format
 msgid ""
 "You do not have any configured Internet connection.\n"
@@ -19451,37 +19448,37 @@ msgstr ""
 "請由 Mandriva Linux 控制中心啟動 \"%s\" 設定精靈"
 
 #. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
+#: standalone/drakconnect:972 standalone/drakroam:42 standalone/net_applet:60
 #, c-format
 msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
 msgstr "設定一個新的網路介面 (區域網路、ISDN、ADSL、...)"
 
-#: standalone/drakconnect:1017
+#: standalone/drakconnect:977
 #, c-format
 msgid "Internet connection configuration"
 msgstr "網際網路連線設定"
 
-#: standalone/drakconnect:1035
+#: standalone/drakconnect:995
 #, c-format
 msgid "Third DNS server (optional)"
 msgstr "第三台 DNS 伺服器 (可不輸入)"
 
-#: standalone/drakconnect:1057
+#: standalone/drakconnect:1017
 #, c-format
 msgid "Internet Connection Configuration"
 msgstr "網際網路連線設定"
 
-#: standalone/drakconnect:1058
+#: standalone/drakconnect:1018
 #, c-format
 msgid "Internet access"
 msgstr "網際網路存取"
 
-#: standalone/drakconnect:1060 standalone/net_monitor:101
+#: standalone/drakconnect:1020 standalone/net_monitor:98
 #, c-format
 msgid "Connection type: "
 msgstr "連線項目： "
 
-#: standalone/drakconnect:1063
+#: standalone/drakconnect:1023
 #, c-format
 msgid "Status:"
 msgstr "狀態："
@@ -19541,7 +19538,7 @@ msgstr "製作開機片"
 msgid "General"
 msgstr "一般"
 
-#: standalone/drakfloppy:82 standalone/harddrake2:146
+#: standalone/drakfloppy:82 standalone/harddrake2:147
 #, c-format
 msgid "Device"
 msgstr "裝置"
@@ -19885,7 +19882,7 @@ msgstr "檔案選取"
 #: standalone/drakfont:590
 #, c-format
 msgid "Fonts"
-msgstr ""
+msgstr "字形"
 
 #: standalone/drakfont:653
 #, fuzzy, c-format
@@ -19957,17 +19954,17 @@ msgstr "由您的系統移除該字體檔案"
 msgid "Post Uninstall"
 msgstr "後續反安裝設定"
 
-#: standalone/drakgw:51 standalone/drakvpn:51
+#: standalone/drakgw:50 standalone/drakvpn:51
 #, fuzzy, c-format
 msgid "Sorry, we support only 2.4 and above kernels."
 msgstr "抱歉, 目前只有支援使用 2.4 的核心版本。"
 
-#: standalone/drakgw:78
+#: standalone/drakgw:75
 #, c-format
 msgid "Internet Connection Sharing"
 msgstr "Internet 連線分享"
 
-#: standalone/drakgw:82
+#: standalone/drakgw:79
 #, c-format
 msgid ""
 "You are about to configure your computer to share its Internet connection.\n"
@@ -19985,7 +19982,7 @@ msgstr ""
 "連上 Internet。請注意: 您需要另外一張網路卡以便\n"
 "於提供區域網路電腦連線存取分享使用。"
 
-#: standalone/drakgw:98
+#: standalone/drakgw:95
 #, c-format
 msgid ""
 "The setup of Internet Connection Sharing has already been done.\n"
@@ -19996,7 +19993,7 @@ msgstr ""
 "目前 Internet 連線分享的設定已經完成了.. 目前已經可用了..\n"
 "您目前打算要做什麼呢？"
 
-#: standalone/drakgw:102
+#: standalone/drakgw:99
 #, fuzzy, c-format
 msgid ""
 "The setup of Internet connection sharing has already been done.\n"
@@ -20008,12 +20005,12 @@ msgstr ""
 "\n"
 "您希望要處理那個？"
 
-#: standalone/drakgw:108
+#: standalone/drakgw:105
 #, fuzzy, c-format
 msgid "Reconfigure"
 msgstr "重新設定"
 
-#: standalone/drakgw:148
+#: standalone/drakgw:145
 #, c-format
 msgid ""
 "There is only one configured network adapter on your system:\n"
@@ -20028,49 +20025,49 @@ msgstr ""
 "\n"
 "現在要進行這張網路卡與區域網路的連線組態設定。"
 
-#: standalone/drakgw:159
+#: standalone/drakgw:156
 #, c-format
 msgid ""
 "Please choose what network adapter will be connected to your Local Area "
 "Network."
 msgstr "請選擇要連線到區域網路內的網路卡。"
 
-#: standalone/drakgw:180
+#: standalone/drakgw:177
 #, fuzzy, c-format
 msgid "Local Area Network setings"
 msgstr "內部網路IP位址"
 
-#: standalone/drakgw:183
+#: standalone/drakgw:180
 #, c-format
 msgid "Local Network adress"
 msgstr "內部網路IP位址"
 
-#: standalone/drakgw:185
+#: standalone/drakgw:182
 #, c-format
 msgid "The internal domain name"
 msgstr "內部網域的名稱"
 
-#: standalone/drakgw:191
+#: standalone/drakgw:188
 #, c-format
 msgid "Potential LAN address conflict found in current config of %s!\n"
 msgstr "潛在的 LAN 位址衝突發現於目前 %s 設定!\n"
 
-#: standalone/drakgw:207
+#: standalone/drakgw:204
 #, fuzzy, c-format
 msgid "Domain Name Server (DNS) configuration"
 msgstr "Mandriva Terminal Server 設定"
 
-#: standalone/drakgw:211
+#: standalone/drakgw:208
 #, c-format
 msgid "Use this gateway as domain name server"
 msgstr ""
 
-#: standalone/drakgw:212
+#: standalone/drakgw:209
 #, c-format
 msgid "The DNS Server IP"
 msgstr "該 DHCP 主機 IP"
 
-#: standalone/drakgw:244
+#: standalone/drakgw:241
 #, fuzzy, c-format
 msgid ""
 "DHCP Server Configuration.\n"
@@ -20084,77 +20081,77 @@ msgstr ""
 "如果您不清楚相關參數的意思, 您可以為持空白不要輸入資料。\n"
 "\n"
 
-#: standalone/drakgw:251
+#: standalone/drakgw:248
 #, fuzzy, c-format
 msgid "Use automatic configuration (DHCP)"
 msgstr "自動重新設定"
 
-#: standalone/drakgw:252
+#: standalone/drakgw:249
 #, c-format
 msgid "The DHCP start range"
 msgstr "DHCP 起始範圍"
 
-#: standalone/drakgw:253
+#: standalone/drakgw:250
 #, c-format
 msgid "The DHCP end range"
 msgstr "DHCP 結束範圍"
 
-#: standalone/drakgw:254
+#: standalone/drakgw:251
 #, c-format
 msgid "The default lease (in seconds)"
 msgstr "預設租約時間 (秒為單位)"
 
-#: standalone/drakgw:255
+#: standalone/drakgw:252
 #, c-format
 msgid "The maximum lease (in seconds)"
 msgstr "最大租約時間  (秒為單位)"
 
-#: standalone/drakgw:281
+#: standalone/drakgw:278
 #, c-format
 msgid "Proxy caching server (SQUID)"
 msgstr ""
 
-#: standalone/drakgw:285
+#: standalone/drakgw:282
 #, c-format
 msgid "Use this gateway as proxy caching server"
 msgstr ""
 
-#: standalone/drakgw:286
+#: standalone/drakgw:283
 #, c-format
 msgid "Admin mail"
 msgstr ""
 
-#: standalone/drakgw:287
+#: standalone/drakgw:284
 #, fuzzy, c-format
 msgid "Visible hostname"
 msgstr "遠端主機名稱"
 
-#: standalone/drakgw:288
+#: standalone/drakgw:285
 #, fuzzy, c-format
 msgid "Proxy port"
 msgstr "特性"
 
-#: standalone/drakgw:289
+#: standalone/drakgw:286
 #, fuzzy, c-format
 msgid "Cache size (MB)"
 msgstr "快取大小"
 
-#: standalone/drakgw:314
+#: standalone/drakgw:311
 #, fuzzy, c-format
 msgid "Broadcast printer information"
 msgstr "硬碟資訊"
 
-#: standalone/drakgw:331
+#: standalone/drakgw:328
 #, c-format
 msgid "Internet Connection Sharing is now enabled."
 msgstr "Internet 連線工想目前開啟了。"
 
-#: standalone/drakgw:337
+#: standalone/drakgw:334
 #, c-format
 msgid "Internet Connection Sharing is now disabled."
 msgstr "Internet 連線共享目前關閉了。"
 
-#: standalone/drakgw:343
+#: standalone/drakgw:340
 #, fuzzy, c-format
 msgid ""
 "Everything has been configured.\n"
@@ -20166,17 +20163,17 @@ msgstr ""
 "現在您的系統已經透過 DHCP 動態 IP 分配的方式取得連線 IP, \n"
 "並且也已經能夠透過其他電腦的頻寬分享存取 Internet 服務。"
 
-#: standalone/drakgw:378
+#: standalone/drakgw:375
 #, c-format
 msgid "Disabling servers..."
 msgstr "正在關閉伺服器..."
 
-#: standalone/drakgw:392
+#: standalone/drakgw:389
 #, c-format
 msgid "Firewalling configuration detected!"
 msgstr "防火牆設定已經偵測到了!"
 
-#: standalone/drakgw:393
+#: standalone/drakgw:390
 #, c-format
 msgid ""
 "Warning! An existing firewalling configuration has been detected. You may "
@@ -20185,12 +20182,12 @@ msgstr ""
 "警告! 偵測到現有已經存在的防火牆組態設定.\n"
 "您應該在安裝之後手動修正某些設定."
 
-#: standalone/drakgw:396
+#: standalone/drakgw:393
 #, c-format
 msgid "Configuring..."
 msgstr "設定中..."
 
-#: standalone/drakgw:397
+#: standalone/drakgw:394
 #, c-format
 msgid "Configuring scripts, installing software, starting servers..."
 msgstr "設定 script, 安裝軟體, 啟動相關的 servers 服務"
@@ -20236,57 +20233,57 @@ msgid ""
 ". No Help entry of this type\n"
 msgstr ""
 
-#: standalone/drakperm:22
+#: standalone/drakperm:21
 #, c-format
 msgid "System settings"
 msgstr "系統設定"
 
-#: standalone/drakperm:23
+#: standalone/drakperm:22
 #, fuzzy, c-format
 msgid "Custom settings"
 msgstr "自訂磁碟分割"
 
-#: standalone/drakperm:24
+#: standalone/drakperm:23
 #, fuzzy, c-format
 msgid "Custom & system settings"
 msgstr "自訂磁碟分割"
 
-#: standalone/drakperm:44
+#: standalone/drakperm:43
 #, c-format
 msgid "Editable"
 msgstr "可編輯的"
 
-#: standalone/drakperm:49 standalone/drakperm:324
+#: standalone/drakperm:48 standalone/drakperm:323
 #, c-format
 msgid "Path"
 msgstr "路徑"
 
-#: standalone/drakperm:49 standalone/drakperm:251
+#: standalone/drakperm:48 standalone/drakperm:250
 #, c-format
 msgid "User"
 msgstr "使用者"
 
-#: standalone/drakperm:49 standalone/drakperm:251
+#: standalone/drakperm:48 standalone/drakperm:250
 #, c-format
 msgid "Group"
 msgstr "群組"
 
-#: standalone/drakperm:49 standalone/drakperm:336
+#: standalone/drakperm:48 standalone/drakperm:335
 #, c-format
 msgid "Permissions"
 msgstr "權限"
 
-#: standalone/drakperm:58
+#: standalone/drakperm:57
 #, c-format
 msgid "Add a new rule"
 msgstr ""
 
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
+#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
 #, c-format
 msgid "Edit current rule"
 msgstr "編輯目前規則"
 
-#: standalone/drakperm:107
+#: standalone/drakperm:106
 #, fuzzy, c-format
 msgid ""
 "Here you can see files to use in order to fix permissions, owners, and "
@@ -20296,115 +20293,115 @@ msgstr ""
 "Drakperm 程式能夠讓使用者檢視以及修改重要檔案的權限, 包含擁有者、\n"
 "群組等資訊。另外您也可以自行編輯創造更多屬於自訂的規則項目。"
 
-#: standalone/drakperm:110
+#: standalone/drakperm:109
 #, c-format
 msgid ""
 "The current security level is %s.\n"
 "Select permissions to see/edit"
 msgstr ""
 
-#: standalone/drakperm:121
+#: standalone/drakperm:120
 #, c-format
 msgid "Up"
 msgstr "向上"
 
-#: standalone/drakperm:121
+#: standalone/drakperm:120
 #, c-format
 msgid "Move selected rule up one level"
 msgstr ""
 
-#: standalone/drakperm:122
+#: standalone/drakperm:121
 #, c-format
 msgid "Down"
 msgstr "向下"
 
-#: standalone/drakperm:122
+#: standalone/drakperm:121
 #, c-format
 msgid "Move selected rule down one level"
 msgstr ""
 
-#: standalone/drakperm:123
+#: standalone/drakperm:122
 #, fuzzy, c-format
 msgid "Add a rule"
 msgstr "新增規則"
 
-#: standalone/drakperm:123
+#: standalone/drakperm:122
 #, c-format
 msgid "Add a new rule at the end"
 msgstr "於結尾新增一項規則"
 
-#: standalone/drakperm:124
+#: standalone/drakperm:123
 #, c-format
 msgid "Delete selected rule"
 msgstr "刪除所選取的規則"
 
 #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
+#: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362
 #: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
 #: standalone/printerdrake:232
 #, c-format
 msgid "Edit"
 msgstr "編輯"
 
-#: standalone/drakperm:243
+#: standalone/drakperm:242
 #, c-format
 msgid "browse"
 msgstr "瀏覽"
 
-#: standalone/drakperm:248
+#: standalone/drakperm:247
 #, c-format
 msgid "user"
 msgstr "擁有者"
 
-#: standalone/drakperm:248
+#: standalone/drakperm:247
 #, c-format
 msgid "group"
 msgstr "群組"
 
-#: standalone/drakperm:248
+#: standalone/drakperm:247
 #, c-format
 msgid "other"
 msgstr "其它"
 
-#: standalone/drakperm:253
+#: standalone/drakperm:252
 #, c-format
 msgid "Read"
 msgstr "已讀"
 
 #. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
+#: standalone/drakperm:255
 #, c-format
 msgid "Enable \"%s\" to read the file"
 msgstr ""
 
-#: standalone/drakperm:260
+#: standalone/drakperm:259
 #, c-format
 msgid "Write"
 msgstr "寫入"
 
 #. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
+#: standalone/drakperm:262
 #, c-format
 msgid "Enable \"%s\" to write the file"
 msgstr ""
 
-#: standalone/drakperm:267
+#: standalone/drakperm:266
 #, c-format
 msgid "Execute"
 msgstr "執行"
 
 #. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
+#: standalone/drakperm:269
 #, c-format
 msgid "Enable \"%s\" to execute the file"
 msgstr ""
 
-#: standalone/drakperm:273
+#: standalone/drakperm:272
 #, fuzzy, c-format
 msgid "Sticky-bit"
 msgstr "Sticky-Bit"
 
-#: standalone/drakperm:273
+#: standalone/drakperm:272
 #, c-format
 msgid ""
 "Used for directory:\n"
@@ -20413,171 +20410,56 @@ msgstr ""
 "使用於目錄:\n"
 " 只有該檔案或目錄的擁有者才可以刪除它"
 
-#: standalone/drakperm:274
+#: standalone/drakperm:273
 #, c-format
 msgid "Set-UID"
 msgstr "Set-UID"
 
-#: standalone/drakperm:274
+#: standalone/drakperm:273
 #, c-format
 msgid "Use owner id for execution"
 msgstr "執行時另外具備該擁有者權限"
 
-#: standalone/drakperm:275
+#: standalone/drakperm:274
 #, c-format
 msgid "Set-GID"
 msgstr "Set-GID"
 
-#: standalone/drakperm:275
+#: standalone/drakperm:274
 #, c-format
 msgid "Use group id for execution"
 msgstr "執行時另外具備該群組權限"
 
-#: standalone/drakperm:293 standalone/drakxtv:89
+#: standalone/drakperm:292 standalone/drakxtv:89
 #, c-format
 msgid "User:"
 msgstr "使用者："
 
-#: standalone/drakperm:295
+#: standalone/drakperm:294
 #, c-format
 msgid "Group:"
 msgstr "分類："
 
-#: standalone/drakperm:299
+#: standalone/drakperm:298
 #, c-format
 msgid "Current user"
 msgstr "目前使用者"
 
-#: standalone/drakperm:300
+#: standalone/drakperm:299
 #, c-format
 msgid "When checked, owner and group will not be changed"
 msgstr "當選取時, 擁有者與群組將不被更動"
 
-#: standalone/drakperm:310
+#: standalone/drakperm:309
 #, c-format
 msgid "Path selection"
 msgstr "路徑選擇"
 
-#: standalone/drakperm:330
+#: standalone/drakperm:329
 #, c-format
 msgid "Property"
 msgstr "特性"
 
-#: standalone/drakpxe:55
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "dhcpd 服務主機設定"
-
-#: standalone/drakpxe:111
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "dhcpd 服務主機設定"
-
-#: standalone/drakpxe:112
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"目前要進行Internet連線分享的設定, 這個功能能夠\n"
-"讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
-"連上 Internet。請注意: 您需要另外一張網路卡以便\n"
-"於提供區域網路電腦連線存取分享使用。"
-
-#: standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "您系統並沒有網路卡存在"
-
-#: standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "選取網路介面"
-
-#: standalone/drakpxe:143
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "請選擇您要用來連上 Internet 的網路卡"
-
-#: standalone/drakpxe:144
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "介面 %s (使用 %s 模組)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP 開始 ip"
-
-#: standalone/drakpxe:174
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP 結束範圍"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (顯示卡驅動程式的安裝)"
-
-#: standalone/drakpxe:196
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "找不到印表機！"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "正在製作自動安裝軟片"
-
-#: standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "安裝 %s 套件發生錯誤"
-
 #: standalone/drakroam:41
 #, c-format
 msgid ""
@@ -20595,7 +20477,7 @@ msgstr ""
 msgid "Mode"
 msgstr "模式"
 
-#: standalone/drakroam:143 standalone/harddrake2:96
+#: standalone/drakroam:143 standalone/harddrake2:97
 #, c-format
 msgid "Channel"
 msgstr "取消"
@@ -20603,7 +20485,7 @@ msgstr "取消"
 #: standalone/drakroam:145
 #, c-format
 msgid "Key"
-msgstr ""
+msgstr "鍵"
 
 #: standalone/drakroam:161
 #, c-format
@@ -20613,17 +20495,17 @@ msgstr ""
 #: standalone/drakroam:162
 #, c-format
 msgid "IP:"
-msgstr ""
+msgstr "IP："
 
 #: standalone/drakroam:164
 #, c-format
 msgid "Mode:"
-msgstr ""
+msgstr "模式:"
 
 #: standalone/drakroam:165
 #, c-format
 msgid "Encryption:"
-msgstr ""
+msgstr "加密："
 
 #: standalone/drakroam:166
 #, c-format
@@ -20687,7 +20569,7 @@ msgid "Disconnect"
 msgstr "斷線"
 
 #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:91
+#: standalone/drakroam:241 standalone/net_applet:89
 #: standalone/printerdrake:238
 #, c-format
 msgid "Refresh"
@@ -20769,7 +20651,7 @@ msgid ""
 "maximum"
 msgstr ""
 
-#: standalone/draksec:154 standalone/harddrake2:207
+#: standalone/draksec:154 standalone/harddrake2:208
 #, c-format
 msgid ""
 "Description of the fields:\n"
@@ -20975,12 +20857,12 @@ msgstr "儲存佈景"
 msgid "saving Bootsplash theme..."
 msgstr "儲存開機載入圖片佈景項目..."
 
-#: standalone/draksplash:160
+#: standalone/draksplash:165
 #, fuzzy, c-format
 msgid "choose image"
 msgstr "選擇映像檔案        "
 
-#: standalone/draksplash:177
+#: standalone/draksplash:182
 #, c-format
 msgid "ProgressBar color selection"
 msgstr "進度巴色彩選擇"
@@ -21020,13 +20902,13 @@ msgstr ""
 msgid "Autodetection"
 msgstr "自動偵測"
 
-#: standalone/drakups:101 standalone/harddrake2:244
+#: standalone/drakups:101 standalone/harddrake2:245
 #, c-format
 msgid "Detection in progress"
 msgstr "正在偵測中"
 
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
+#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449
+#: standalone/logdrake:455
 #, c-format
 msgid "Congratulations"
 msgstr "恭喜"
@@ -21099,8 +20981,8 @@ msgid "UPS devices"
 msgstr "Server 程式"
 
 #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
+#: standalone/harddrake2:85 standalone/harddrake2:111
+#: standalone/harddrake2:118
 #, c-format
 msgid "Name"
 msgstr "名稱"
@@ -21130,7 +21012,7 @@ msgstr "規則"
 msgid "Action"
 msgstr "行動"
 
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
+#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:82
 #, c-format
 msgid "Level"
 msgstr "難度"
@@ -21288,6 +21170,11 @@ msgid ""
 "This kernel has '%s' support."
 msgstr ""
 
+#: standalone/drakvpn:278
+#, c-format
+msgid "Problems installing package %s"
+msgstr "安裝 %s 套件發生錯誤"
+
 #: standalone/drakvpn:292
 #, c-format
 msgid "Security Policies"
@@ -22448,28 +22335,28 @@ msgstr ""
 "\n"
 "http://www.mandrivalinux.com/en/hardware.php3"
 
-#: standalone/harddrake2:24
+#: standalone/harddrake2:25
 #, c-format
 msgid "Alternative drivers"
 msgstr "另外可供選擇的驅動程式"
 
-#: standalone/harddrake2:25
+#: standalone/harddrake2:26
 #, c-format
 msgid "the list of alternative drivers for this sound card"
 msgstr "可供您的音效卡額外可選擇的驅動程式清單"
 
-#: standalone/harddrake2:28
+#: standalone/harddrake2:29
 #, c-format
 msgid ""
 "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr "該裝置目前安插上了多少個實體 bug 裝置 (比方：PCI、USB 等等...)"
 
-#: standalone/harddrake2:30 standalone/harddrake2:145
+#: standalone/harddrake2:31 standalone/harddrake2:146
 #, c-format
 msgid "Bus identification"
 msgstr "匯流排描述"
 
-#: standalone/harddrake2:31
+#: standalone/harddrake2:32
 #, fuzzy, c-format
 msgid ""
 "- PCI and USB devices: this lists the vendor, device, subvendor and "
@@ -22477,7 +22364,7 @@ msgid ""
 msgstr ""
 "- PCI 與 USB 裝置：這列出了廠商名稱, 裝置名稱與附屬廠商等 PCI/USB IDS 資訊"
 
-#: standalone/harddrake2:34
+#: standalone/harddrake2:35
 #, c-format
 msgid ""
 "- pci devices: this gives the PCI slot, device and function of this card\n"
@@ -22488,204 +22375,204 @@ msgstr ""
 "- EIDE 裝置：包含 Master 或者是 Slave 裝置項目\n"
 "- SCSI 裝置：包含 SCSI 匯流排裝置與 SCSI 裝置的 IDS"
 
-#: standalone/harddrake2:37
+#: standalone/harddrake2:38
 #, c-format
 msgid "Drive capacity"
 msgstr ""
 
-#: standalone/harddrake2:37
+#: standalone/harddrake2:38
 #, c-format
 msgid "special capacities of the driver (burning ability and or DVD support)"
 msgstr ""
 
-#: standalone/harddrake2:38
+#: standalone/harddrake2:39
 #, fuzzy, c-format
 msgid "this field describes the device"
 msgstr "該裝置的欄位描述"
 
-#: standalone/harddrake2:39
+#: standalone/harddrake2:40
 #, c-format
 msgid "Old device file"
 msgstr "舊的裝置檔案"
 
-#: standalone/harddrake2:40
+#: standalone/harddrake2:41
 #, c-format
 msgid "old static device name used in dev package"
 msgstr "dev 套件內所使用的舊有裝置名稱"
 
-#: standalone/harddrake2:41
+#: standalone/harddrake2:42
 #, c-format
 msgid "New devfs device"
 msgstr "新的 devfs 裝置"
 
-#: standalone/harddrake2:42
+#: standalone/harddrake2:43
 #, fuzzy, c-format
 msgid "new dynamic device name generated by core kernel devfs"
 msgstr "由何新的 devfs 提供產生的動態新裝置名稱"
 
 #. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
+#: standalone/harddrake2:46
 #, c-format
 msgid "Module"
 msgstr "型號"
 
-#: standalone/harddrake2:45
+#: standalone/harddrake2:46
 #, c-format
 msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr "負責處理此裝置的 GNU/Linux 核心模組"
 
-#: standalone/harddrake2:46
+#: standalone/harddrake2:47
 #, c-format
 msgid "Extended partitions"
 msgstr "延伸分割區"
 
-#: standalone/harddrake2:46
+#: standalone/harddrake2:47
 #, c-format
 msgid "the number of extended partitions"
 msgstr "延伸分割區的數目"
 
-#: standalone/harddrake2:47
+#: standalone/harddrake2:48
 #, c-format
 msgid "Geometry"
 msgstr "幾何"
 
-#: standalone/harddrake2:47
+#: standalone/harddrake2:48
 #, c-format
 msgid "Cylinder/head/sectors geometry of the disk"
 msgstr ""
 
-#: standalone/harddrake2:48
+#: standalone/harddrake2:49
 #, c-format
 msgid "Disk controller"
 msgstr ""
 
-#: standalone/harddrake2:48
+#: standalone/harddrake2:49
 #, c-format
 msgid "the disk controller on the host side"
 msgstr ""
 
-#: standalone/harddrake2:49
+#: standalone/harddrake2:50
 #, c-format
 msgid "class of hardware device"
 msgstr "硬體裝置類別"
 
-#: standalone/harddrake2:50 standalone/harddrake2:82
+#: standalone/harddrake2:51 standalone/harddrake2:83
 #: standalone/printerdrake:211
 #, c-format
 msgid "Model"
 msgstr "型號"
 
-#: standalone/harddrake2:50
+#: standalone/harddrake2:51
 #, c-format
 msgid "hard disk model"
 msgstr "硬碟型號"
 
-#: standalone/harddrake2:51
+#: standalone/harddrake2:52
 #, c-format
 msgid "network printer port"
 msgstr "網路印表機連接埠"
 
-#: standalone/harddrake2:52
+#: standalone/harddrake2:53
 #, c-format
 msgid "Primary partitions"
 msgstr "主分割區"
 
-#: standalone/harddrake2:52
+#: standalone/harddrake2:53
 #, c-format
 msgid "the number of the primary partitions"
 msgstr "主分割區的數目"
 
-#: standalone/harddrake2:53
+#: standalone/harddrake2:54
 #, c-format
 msgid "the vendor name of the device"
 msgstr "裝置的廠商名稱"
 
-#: standalone/harddrake2:54
+#: standalone/harddrake2:55
 #, c-format
 msgid "Bus PCI #"
 msgstr ""
 
-#: standalone/harddrake2:54
+#: standalone/harddrake2:55
 #, c-format
 msgid "the PCI bus on which the device is plugged"
 msgstr "安裝該裝置的 PCI 匯流排"
 
-#: standalone/harddrake2:55
+#: standalone/harddrake2:56
 #, c-format
 msgid "PCI device #"
 msgstr "PCI 裝置編號"
 
-#: standalone/harddrake2:55
+#: standalone/harddrake2:56
 #, c-format
 msgid "PCI device number"
 msgstr "PCI 裝置的編號"
 
-#: standalone/harddrake2:56
+#: standalone/harddrake2:57
 #, c-format
 msgid "PCI function #"
 msgstr ""
 
-#: standalone/harddrake2:56
+#: standalone/harddrake2:57
 #, fuzzy, c-format
 msgid "PCI function number"
 msgstr "連線名稱"
 
-#: standalone/harddrake2:57
+#: standalone/harddrake2:58
 #, fuzzy, c-format
 msgid "Vendor ID"
 msgstr "廠商"
 
-#: standalone/harddrake2:57
+#: standalone/harddrake2:58
 #, c-format
 msgid "this is the standard numerical identifier of the vendor"
 msgstr ""
 
-#: standalone/harddrake2:58
+#: standalone/harddrake2:59
 #, fuzzy, c-format
 msgid "Device ID"
 msgstr "裝置： "
 
-#: standalone/harddrake2:58
+#: standalone/harddrake2:59
 #, fuzzy, c-format
 msgid "this is the numerical identifier of the device"
 msgstr "裝置的廠商名稱"
 
-#: standalone/harddrake2:59
+#: standalone/harddrake2:60
 #, c-format
 msgid "Sub vendor ID"
 msgstr ""
 
-#: standalone/harddrake2:59
+#: standalone/harddrake2:60
 #, c-format
 msgid "this is the minor numerical identifier of the vendor"
 msgstr ""
 
-#: standalone/harddrake2:60
+#: standalone/harddrake2:61
 #, fuzzy, c-format
 msgid "Sub device ID"
 msgstr "Server 程式"
 
-#: standalone/harddrake2:60
+#: standalone/harddrake2:61
 #, fuzzy, c-format
 msgid "this is the minor numerical identifier of the device"
 msgstr "裝置的廠商名稱"
 
-#: standalone/harddrake2:61
+#: standalone/harddrake2:62
 #, fuzzy, c-format
 msgid "Device USB ID"
 msgstr "裝置： "
 
-#: standalone/harddrake2:61
+#: standalone/harddrake2:62
 #, c-format
 msgid ".."
 msgstr ".."
 
-#: standalone/harddrake2:65
+#: standalone/harddrake2:66
 #, c-format
 msgid "Bogomips"
 msgstr ""
 
-#: standalone/harddrake2:65
+#: standalone/harddrake2:66
 #, c-format
 msgid ""
 "the GNU/Linux kernel needs to run a calculation loop at boot time to "
@@ -22693,53 +22580,53 @@ msgid ""
 "\"benchmark\" the cpu."
 msgstr ""
 
-#: standalone/harddrake2:66
+#: standalone/harddrake2:67
 #, c-format
 msgid "Cache size"
 msgstr "快取大小"
 
-#: standalone/harddrake2:66
+#: standalone/harddrake2:67
 #, c-format
 msgid "size of the (second level) cpu cache"
 msgstr "CPU 的第二層快取記憶體大小"
 
 #. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
+#: standalone/harddrake2:70
 #, c-format
 msgid "Coma bug"
 msgstr ""
 
-#: standalone/harddrake2:69
+#: standalone/harddrake2:70
 #, c-format
 msgid "whether this cpu has the Cyrix 6x86 Coma bug"
 msgstr ""
 
-#: standalone/harddrake2:70
+#: standalone/harddrake2:71
 #, c-format
 msgid "Cpuid family"
 msgstr "CPU 家族"
 
-#: standalone/harddrake2:70
+#: standalone/harddrake2:71
 #, c-format
 msgid "family of the cpu (eg: 6 for i686 class)"
 msgstr "CPU 的家族 (例如：6 表示 i686 等級)"
 
-#: standalone/harddrake2:71
+#: standalone/harddrake2:72
 #, fuzzy, c-format
 msgid "Cpuid level"
 msgstr "安全等級"
 
-#: standalone/harddrake2:71
+#: standalone/harddrake2:72
 #, c-format
 msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
 
-#: standalone/harddrake2:72
+#: standalone/harddrake2:73
 #, c-format
 msgid "Frequency (MHz)"
 msgstr "頻率 (MHz)"
 
-#: standalone/harddrake2:72
+#: standalone/harddrake2:73
 #, c-format
 msgid ""
 "the CPU frequency in MHz (Megahertz which in first approximation may be "
@@ -22749,22 +22636,22 @@ msgstr ""
 "CPU 的工作頻率，以 MHz 為單位 (百萬赫茲，一般而言近似於 CPU 每秒能夠處理的指"
 "令數)"
 
-#: standalone/harddrake2:73
+#: standalone/harddrake2:74
 #, c-format
 msgid "Flags"
 msgstr "旗標"
 
-#: standalone/harddrake2:73
+#: standalone/harddrake2:74
 #, c-format
 msgid "CPU flags reported by the kernel"
 msgstr ""
 
-#: standalone/harddrake2:74
+#: standalone/harddrake2:75
 #, c-format
 msgid "Fdiv bug"
 msgstr ""
 
-#: standalone/harddrake2:75
+#: standalone/harddrake2:76
 #, c-format
 msgid ""
 "Early Intel Pentium chips manufactured have a bug in their floating point "
@@ -22772,104 +22659,104 @@ msgid ""
 "Floating point DIVision (FDIV)"
 msgstr ""
 
-#: standalone/harddrake2:76
+#: standalone/harddrake2:77
 #, c-format
 msgid "Is FPU present"
 msgstr ""
 
-#: standalone/harddrake2:76
+#: standalone/harddrake2:77
 #, c-format
 msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: standalone/harddrake2:77
+#: standalone/harddrake2:78
 #, c-format
 msgid "Whether the FPU has an irq vector"
 msgstr ""
 
-#: standalone/harddrake2:77
+#: standalone/harddrake2:78
 #, c-format
 msgid "yes means the arithmetic coprocessor has an exception vector attached"
 msgstr ""
 
-#: standalone/harddrake2:78
+#: standalone/harddrake2:79
 #, c-format
 msgid "F00f bug"
 msgstr ""
 
-#: standalone/harddrake2:78
+#: standalone/harddrake2:79
 #, c-format
 msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
 msgstr ""
 
-#: standalone/harddrake2:79
+#: standalone/harddrake2:80
 #, c-format
 msgid "Halt bug"
 msgstr ""
 
-#: standalone/harddrake2:80
+#: standalone/harddrake2:81
 #, c-format
 msgid ""
 "Some of the early i486DX-100 chips cannot reliably return to operating mode "
 "after the \"halt\" instruction is used"
 msgstr ""
 
-#: standalone/harddrake2:81
+#: standalone/harddrake2:82
 #, c-format
 msgid "sub generation of the cpu"
 msgstr ""
 
-#: standalone/harddrake2:82
+#: standalone/harddrake2:83
 #, c-format
 msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
 msgstr ""
 
-#: standalone/harddrake2:83
+#: standalone/harddrake2:84
 #, c-format
 msgid "Model name"
 msgstr "模組名稱"
 
-#: standalone/harddrake2:83
+#: standalone/harddrake2:84
 #, c-format
 msgid "official vendor name of the cpu"
 msgstr "官方的 CPU 名稱"
 
-#: standalone/harddrake2:84
+#: standalone/harddrake2:85
 #, c-format
 msgid "the name of the CPU"
 msgstr "CPU 的名稱"
 
-#: standalone/harddrake2:85
+#: standalone/harddrake2:86
 #, c-format
 msgid "Processor ID"
 msgstr "處理器 ID"
 
-#: standalone/harddrake2:85
+#: standalone/harddrake2:86
 #, c-format
 msgid "the number of the processor"
 msgstr "處理器的編號"
 
-#: standalone/harddrake2:86
+#: standalone/harddrake2:87
 #, c-format
 msgid "Model stepping"
 msgstr "模型步"
 
-#: standalone/harddrake2:86
+#: standalone/harddrake2:87
 #, c-format
 msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: standalone/harddrake2:87
+#: standalone/harddrake2:88
 #, c-format
 msgid "the vendor name of the processor"
 msgstr "處理器的廠商名稱"
 
-#: standalone/harddrake2:88
+#: standalone/harddrake2:89
 #, c-format
 msgid "Write protection"
 msgstr "寫入保護"
 
-#: standalone/harddrake2:88
+#: standalone/harddrake2:89
 #, c-format
 msgid ""
 "the WP flag in the CR0 register of the cpu enforce write protection at the "
@@ -22877,37 +22764,37 @@ msgid ""
 "accesses to user memory (aka this is a bug guard)"
 msgstr ""
 
-#: standalone/harddrake2:92
+#: standalone/harddrake2:93
 #, c-format
 msgid "Floppy format"
 msgstr "軟碟格式"
 
-#: standalone/harddrake2:92
+#: standalone/harddrake2:93
 #, c-format
 msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: standalone/harddrake2:96
+#: standalone/harddrake2:97
 #, c-format
 msgid "EIDE/SCSI channel"
 msgstr "EIDE/SCSI 通道"
 
-#: standalone/harddrake2:97
+#: standalone/harddrake2:98
 #, fuzzy, c-format
 msgid "Disk identifier"
 msgstr "印表機"
 
-#: standalone/harddrake2:97
+#: standalone/harddrake2:98
 #, c-format
 msgid "usually the disk serial number"
 msgstr ""
 
-#: standalone/harddrake2:98
+#: standalone/harddrake2:99
 #, fuzzy, c-format
 msgid "Logical unit number"
 msgstr "本機密碼檔"
 
-#: standalone/harddrake2:98
+#: standalone/harddrake2:99
 #, c-format
 msgid ""
 "the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
@@ -22916,222 +22803,222 @@ msgid ""
 msgstr ""
 
 #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
+#: standalone/harddrake2:106
 #, c-format
 msgid "Installed size"
 msgstr "已安裝的大小"
 
-#: standalone/harddrake2:105
+#: standalone/harddrake2:106
 #, c-format
 msgid "Installed size of the memory bank"
 msgstr ""
 
-#: standalone/harddrake2:106
+#: standalone/harddrake2:107
 #, fuzzy, c-format
 msgid "Enabled Size"
 msgstr "開啟"
 
-#: standalone/harddrake2:106
+#: standalone/harddrake2:107
 #, c-format
 msgid "Enabled size of the memory bank"
 msgstr ""
 
-#: standalone/harddrake2:107
+#: standalone/harddrake2:108
 #, fuzzy, c-format
 msgid "type of the memory device"
 msgstr "裝置的廠商名稱"
 
-#: standalone/harddrake2:108
+#: standalone/harddrake2:109
 #, c-format
 msgid "Speed"
 msgstr "速度"
 
-#: standalone/harddrake2:108
+#: standalone/harddrake2:109
 #, c-format
 msgid "Speed of the memory bank"
 msgstr ""
 
-#: standalone/harddrake2:109
+#: standalone/harddrake2:110
 #, fuzzy, c-format
 msgid "Bank connections"
 msgstr "Cable 連線"
 
-#: standalone/harddrake2:110
+#: standalone/harddrake2:111
 #, c-format
 msgid "Socket designation of the memory bank"
 msgstr ""
 
-#: standalone/harddrake2:114
+#: standalone/harddrake2:115
 #, c-format
 msgid "Device file"
 msgstr "裝置檔案"
 
-#: standalone/harddrake2:114
+#: standalone/harddrake2:115
 #, c-format
 msgid ""
 "the device file used to communicate with the kernel driver for the mouse"
 msgstr "這隻滑鼠用來與核心驅動程式溝通的裝置檔案"
 
-#: standalone/harddrake2:115
+#: standalone/harddrake2:116
 #, c-format
 msgid "Emulated wheel"
 msgstr "模擬滾輪"
 
-#: standalone/harddrake2:115
+#: standalone/harddrake2:116
 #, c-format
 msgid "whether the wheel is emulated or not"
 msgstr "是否模擬滾輪"
 
-#: standalone/harddrake2:116
+#: standalone/harddrake2:117
 #, c-format
 msgid "the type of the mouse"
 msgstr "滑鼠的樣式"
 
-#: standalone/harddrake2:117
+#: standalone/harddrake2:118
 #, c-format
 msgid "the name of the mouse"
 msgstr "滑鼠名稱"
 
-#: standalone/harddrake2:118
+#: standalone/harddrake2:119
 #, c-format
 msgid "Number of buttons"
 msgstr "按鍵數"
 
-#: standalone/harddrake2:118
+#: standalone/harddrake2:119
 #, c-format
 msgid "the number of buttons the mouse has"
 msgstr "滑鼠所擁有的按鍵數"
 
-#: standalone/harddrake2:119
+#: standalone/harddrake2:120
 #, fuzzy, c-format
 msgid "the type of bus on which the mouse is connected"
 msgstr "請選取您滑鼠連接的序列埠。"
 
-#: standalone/harddrake2:120
+#: standalone/harddrake2:121
 #, c-format
 msgid "Mouse protocol used by X11"
 msgstr ""
 
-#: standalone/harddrake2:120
+#: standalone/harddrake2:121
 #, c-format
 msgid "the protocol that the graphical desktop use with the mouse"
 msgstr ""
 
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
+#: standalone/harddrake2:128 standalone/harddrake2:137
+#: standalone/harddrake2:144 standalone/harddrake2:152
+#: standalone/harddrake2:318
 #, c-format
 msgid "Identification"
 msgstr "辨別身份"
 
-#: standalone/harddrake2:128 standalone/harddrake2:144
+#: standalone/harddrake2:129 standalone/harddrake2:145
 #, c-format
 msgid "Connection"
 msgstr "連線"
 
-#: standalone/harddrake2:137
+#: standalone/harddrake2:138
 #, fuzzy, c-format
 msgid "Performances"
 msgstr "偏好"
 
-#: standalone/harddrake2:138
+#: standalone/harddrake2:139
 #, fuzzy, c-format
 msgid "Bugs"
 msgstr "匯流排"
 
-#: standalone/harddrake2:139
+#: standalone/harddrake2:140
 #, c-format
 msgid "FPU"
 msgstr ""
 
-#: standalone/harddrake2:147
+#: standalone/harddrake2:148
 #, c-format
 msgid "Partitions"
 msgstr "磁碟分割區"
 
-#: standalone/harddrake2:152
+#: standalone/harddrake2:153
 #, c-format
 msgid "Features"
 msgstr "功能"
 
 #. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
+#: standalone/harddrake2:176 standalone/logdrake:76
 #: standalone/printerdrake:134 standalone/printerdrake:147
 #, c-format
 msgid "/_Options"
 msgstr "/選項 (_O)"
 
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
+#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
 #: standalone/printerdrake:159 standalone/printerdrake:161
 #: standalone/printerdrake:164 standalone/printerdrake:166
 #, c-format
 msgid "/_Help"
 msgstr "/說明 (_H)"
 
-#: standalone/harddrake2:180
+#: standalone/harddrake2:181
 #, c-format
 msgid "/Autodetect _printers"
 msgstr "/自動偵測印表機 (_P)"
 
-#: standalone/harddrake2:181
+#: standalone/harddrake2:182
 #, c-format
 msgid "/Autodetect _modems"
 msgstr "/自動偵測數據機 (_M)"
 
-#: standalone/harddrake2:182
+#: standalone/harddrake2:183
 #, c-format
 msgid "/Autodetect _jaz drives"
 msgstr "/自動偵測 Jaz 裝置 (_J)"
 
-#: standalone/harddrake2:183
+#: standalone/harddrake2:184
 #, c-format
 msgid "/Autodetect parallel _zip drives"
 msgstr ""
 
-#: standalone/harddrake2:190
+#: standalone/harddrake2:191
 #, c-format
 msgid "/_Upload the hardware list"
 msgstr ""
 
-#: standalone/harddrake2:191 standalone/printerdrake:140
+#: standalone/harddrake2:192 standalone/printerdrake:140
 #, c-format
 msgid "/_Quit"
 msgstr "/結束 (_Q)"
 
-#: standalone/harddrake2:204
+#: standalone/harddrake2:205
 #, c-format
 msgid "/_Fields description"
 msgstr "/欄位的描述資訊 (_F)"
 
-#: standalone/harddrake2:206
+#: standalone/harddrake2:207
 #, c-format
 msgid "Harddrake help"
 msgstr "Harddrake 說明"
 
-#: standalone/harddrake2:215
+#: standalone/harddrake2:216
 #, c-format
 msgid ""
 "Once you've selected a device, you'll be able to see the device information "
 "in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: standalone/harddrake2:221 standalone/printerdrake:164
+#: standalone/harddrake2:222 standalone/printerdrake:164
 #, c-format
 msgid "/_Report Bug"
 msgstr "/報告錯誤 (_R)"
 
-#: standalone/harddrake2:223 standalone/printerdrake:166
+#: standalone/harddrake2:224 standalone/printerdrake:166
 #, c-format
 msgid "/_About..."
 msgstr "/關於 (_A)"
 
-#: standalone/harddrake2:224
+#: standalone/harddrake2:225
 #, c-format
 msgid "About Harddrake"
 msgstr "關於 Harddrake"
 
 #. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
+#: standalone/harddrake2:227
 #, fuzzy, c-format
 msgid ""
 "This is HardDrake, a %s hardware configuration tool.\n"
@@ -23146,85 +23033,85 @@ msgstr ""
 "tvignaud@mandriva.com&gt;\n"
 "\n"
 
-#: standalone/harddrake2:240
+#: standalone/harddrake2:241
 #, fuzzy, c-format
 msgid "Harddrake2"
 msgstr "HardDrake 硬體偵測設定"
 
-#: standalone/harddrake2:254
+#: standalone/harddrake2:255
 #, c-format
 msgid "Detected hardware"
 msgstr "已偵測到的硬體"
 
-#: standalone/harddrake2:259
+#: standalone/harddrake2:260
 #, c-format
 msgid "Configure module"
 msgstr "設定模組"
 
-#: standalone/harddrake2:266
+#: standalone/harddrake2:267
 #, c-format
 msgid "Run config tool"
 msgstr "執行設定程式"
 
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
+#: standalone/harddrake2:305 standalone/net_monitor:105
+#: standalone/net_monitor:106 standalone/net_monitor:111
 #, c-format
 msgid "unknown"
 msgstr "不詳"
 
-#: standalone/harddrake2:305 standalone/printerdrake:298
+#: standalone/harddrake2:306 standalone/printerdrake:298
 #: standalone/printerdrake:336
 #, c-format
 msgid "Unknown"
 msgstr "未知的"
 
-#: standalone/harddrake2:325
+#: standalone/harddrake2:326
 #, c-format
 msgid "Misc"
 msgstr "其它"
 
-#: standalone/harddrake2:340
+#: standalone/harddrake2:341
 #, c-format
 msgid ""
 "Click on a device in the left tree in order to display its information here."
 msgstr ""
 
-#: standalone/harddrake2:392
+#: standalone/harddrake2:393
 #, c-format
 msgid "secondary"
 msgstr ""
 
-#: standalone/harddrake2:392
+#: standalone/harddrake2:393
 #, c-format
 msgid "primary"
 msgstr ""
 
-#: standalone/harddrake2:396
+#: standalone/harddrake2:397
 #, c-format
 msgid "burner"
 msgstr "燒錄器"
 
-#: standalone/harddrake2:396
+#: standalone/harddrake2:397
 #, c-format
 msgid "DVD"
 msgstr "DVD"
 
-#: standalone/harddrake2:542 standalone/harddrake2:545
+#: standalone/harddrake2:543 standalone/harddrake2:546
 #, c-format
 msgid "Upload the hardware list"
 msgstr ""
 
-#: standalone/harddrake2:547
+#: standalone/harddrake2:548
 #, c-format
 msgid "Account:"
 msgstr "帳號："
 
-#: standalone/harddrake2:548
+#: standalone/harddrake2:549
 #, c-format
 msgid "Password:"
 msgstr "密碼："
 
-#: standalone/harddrake2:549
+#: standalone/harddrake2:550
 #, c-format
 msgid "Hostname:"
 msgstr "主機名稱："
@@ -23244,210 +23131,210 @@ msgstr "您希望 BackSpace 後退鍵能夠在 console 下回應 Delete 按鍵�
 msgid "LocaleDrake"
 msgstr "LocaleDrake"
 
-#: standalone/localedrake:68
+#: standalone/localedrake:43
 #, c-format
 msgid "The change is done, but to be effective you must logout"
 msgstr "變更已經完成，不過您需要重新登入才能夠生效"
 
-#: standalone/logdrake:50
+#: standalone/logdrake:49
 #, c-format
 msgid "Mandriva Linux Tools Logs"
 msgstr "Mandriva 工具紀錄"
 
-#: standalone/logdrake:51
+#: standalone/logdrake:50
 #, c-format
 msgid "Logdrake"
 msgstr "Logdrake"
 
-#: standalone/logdrake:64
+#: standalone/logdrake:63
 #, c-format
 msgid "Show only for the selected day"
 msgstr "僅顯示所選取日期"
 
-#: standalone/logdrake:71
+#: standalone/logdrake:70
 #, c-format
 msgid "/File/_New"
 msgstr "/檔案 (F)/新增 (_N)"
 
-#: standalone/logdrake:71
+#: standalone/logdrake:70
 #, c-format
 msgid "<control>N"
 msgstr "<control>N"
 
-#: standalone/logdrake:72
+#: standalone/logdrake:71
 #, c-format
 msgid "/File/_Open"
 msgstr "/檔案 (F)/開啟 (_O)"
 
-#: standalone/logdrake:72
+#: standalone/logdrake:71
 #, c-format
 msgid "<control>O"
 msgstr "<control>O"
 
-#: standalone/logdrake:73
+#: standalone/logdrake:72
 #, c-format
 msgid "/File/_Save"
 msgstr "/檔案 (F)/儲存 (_S)"
 
-#: standalone/logdrake:73
+#: standalone/logdrake:72
 #, c-format
 msgid "<control>S"
 msgstr "<control>S"
 
-#: standalone/logdrake:74
+#: standalone/logdrake:73
 #, c-format
 msgid "/File/Save _As"
 msgstr "/檔案 (F)/另存新檔 (_A)"
 
-#: standalone/logdrake:75
+#: standalone/logdrake:74
 #, c-format
 msgid "/File/-"
 msgstr "/檔案 (F)/-"
 
-#: standalone/logdrake:78
+#: standalone/logdrake:77
 #, c-format
 msgid "/Options/Test"
 msgstr "/選項 (O)/測試"
 
-#: standalone/logdrake:80
+#: standalone/logdrake:79
 #, c-format
 msgid "/Help/_About..."
 msgstr "/說明 (H)/關於 (_A)"
 
-#: standalone/logdrake:109
+#: standalone/logdrake:108
 #, c-format
 msgid ""
 "_:this is the auth.log log file\n"
 "Authentication"
 msgstr ""
 
-#: standalone/logdrake:110
+#: standalone/logdrake:109
 #, c-format
 msgid ""
 "_:this is the user.log log file\n"
 "User"
 msgstr ""
 
-#: standalone/logdrake:111
+#: standalone/logdrake:110
 #, c-format
 msgid ""
 "_:this is the /var/log/messages log file\n"
 "Messages"
 msgstr ""
 
-#: standalone/logdrake:112
+#: standalone/logdrake:111
 #, c-format
 msgid ""
 "_:this is the /var/log/syslog log file\n"
 "Syslog"
 msgstr ""
 
-#: standalone/logdrake:116
+#: standalone/logdrake:115
 #, c-format
 msgid "search"
 msgstr "尋找"
 
-#: standalone/logdrake:128
+#: standalone/logdrake:127
 #, c-format
 msgid "A tool to monitor your logs"
 msgstr "監察記錄檔的工具"
 
-#: standalone/logdrake:129 standalone/net_monitor:99
+#: standalone/logdrake:128 standalone/net_monitor:96
 #, c-format
 msgid "Settings"
 msgstr "設定"
 
-#: standalone/logdrake:134
+#: standalone/logdrake:133
 #, c-format
 msgid "Matching"
 msgstr "相配的"
 
-#: standalone/logdrake:135
+#: standalone/logdrake:134
 #, c-format
 msgid "but not matching"
 msgstr "但是不相配"
 
-#: standalone/logdrake:139
+#: standalone/logdrake:138
 #, c-format
 msgid "Choose file"
 msgstr "選取檔案"
 
-#: standalone/logdrake:148
+#: standalone/logdrake:147
 #, c-format
 msgid "Calendar"
 msgstr "行事曆"
 
-#: standalone/logdrake:158
+#: standalone/logdrake:157
 #, c-format
 msgid "Content of the file"
 msgstr "檔案內容"
 
-#: standalone/logdrake:162 standalone/logdrake:400
+#: standalone/logdrake:161 standalone/logdrake:399
 #, c-format
 msgid "Mail alert"
 msgstr "郵件警示"
 
-#: standalone/logdrake:169
+#: standalone/logdrake:168
 #, c-format
 msgid "The alert wizard has failed unexpectedly:"
 msgstr "警示精靈無預警的結束："
 
-#: standalone/logdrake:222
+#: standalone/logdrake:221
 #, c-format
 msgid "please wait, parsing file: %s"
 msgstr "請稍候，正在解析檔案：%s"
 
-#: standalone/logdrake:377
+#: standalone/logdrake:376
 #, c-format
 msgid "Apache World Wide Web Server"
 msgstr "Apache WWW 伺服器"
 
-#: standalone/logdrake:378
+#: standalone/logdrake:377
 #, c-format
 msgid "Domain Name Resolver"
 msgstr "網域名稱解析器"
 
-#: standalone/logdrake:379
+#: standalone/logdrake:378
 #, c-format
 msgid "Ftp Server"
 msgstr "FTP 伺服器"
 
-#: standalone/logdrake:380
+#: standalone/logdrake:379
 #, c-format
 msgid "Postfix Mail Server"
 msgstr "Postfix 郵件伺服器"
 
-#: standalone/logdrake:381
+#: standalone/logdrake:380
 #, c-format
 msgid "Samba Server"
 msgstr "Samba 伺服器"
 
-#: standalone/logdrake:383
+#: standalone/logdrake:382
 #, c-format
 msgid "Webmin Service"
 msgstr "Webmin 服務"
 
-#: standalone/logdrake:384
+#: standalone/logdrake:383
 #, c-format
 msgid "Xinetd Service"
 msgstr "Xinetd 服務"
 
-#: standalone/logdrake:395
+#: standalone/logdrake:394
 #, fuzzy, c-format
 msgid "Configure the mail alert system"
 msgstr "設定郵件警示系統"
 
-#: standalone/logdrake:396
+#: standalone/logdrake:395
 #, c-format
 msgid "Stop the mail alert system"
 msgstr "停止郵件警示系統"
 
-#: standalone/logdrake:403
+#: standalone/logdrake:402
 #, c-format
 msgid "Mail alert configuration"
 msgstr "郵件警示通知組態設定"
 
-#: standalone/logdrake:404
+#: standalone/logdrake:403
 #, c-format
 msgid ""
 "Welcome to the mail configuration utility.\n"
@@ -23458,66 +23345,66 @@ msgstr ""
 "\n"
 "在這裡, 您能夠設定您的警示通知的方式。\n"
 
-#: standalone/logdrake:407
+#: standalone/logdrake:406
 #, c-format
 msgid "What do you want to do?"
 msgstr "您想要做什麼？"
 
-#: standalone/logdrake:414
+#: standalone/logdrake:413
 #, c-format
 msgid "Services settings"
 msgstr "服務設定"
 
-#: standalone/logdrake:415
+#: standalone/logdrake:414
 #, c-format
 msgid ""
 "You will receive an alert if one of the selected services is no longer "
 "running"
 msgstr "若是您所選取的服務項目沒有執行的話，您將會收到警示通知"
 
-#: standalone/logdrake:422
+#: standalone/logdrake:421
 #, c-format
 msgid "Load setting"
 msgstr "載入設定"
 
-#: standalone/logdrake:423
+#: standalone/logdrake:422
 #, c-format
 msgid "You will receive an alert if the load is higher than this value"
 msgstr "當系統負載超過此數值時，您將會收到警示通知"
 
-#: standalone/logdrake:424
+#: standalone/logdrake:423
 #, c-format
 msgid ""
 "_: load here is a noun, the load of the system\n"
 "Load"
 msgstr ""
 
-#: standalone/logdrake:429
+#: standalone/logdrake:428
 #, fuzzy, c-format
 msgid "Alert configuration"
 msgstr "警示設定"
 
-#: standalone/logdrake:430
+#: standalone/logdrake:429
 #, c-format
 msgid "Please enter your email address below "
 msgstr "請於下方輸入你的 e-mail"
 
-#: standalone/logdrake:431
+#: standalone/logdrake:430
 #, c-format
 msgid "and enter the name (or the IP) of the SMTP server you wish to use"
 msgstr ""
 
-#: standalone/logdrake:450
+#: standalone/logdrake:449
 #, c-format
 msgid "The wizard successfully configured the mail alert."
 msgstr ""
 
-#: standalone/logdrake:456
+#: standalone/logdrake:455
 #, c-format
 msgid "The wizard successfully disabled the mail alert."
 msgstr ""
 
-#: standalone/logdrake:515
+#: standalone/logdrake:514
 #, c-format
 msgid "Save as.."
 msgstr "另存新檔..."
@@ -23542,168 +23429,168 @@ msgstr "滑鼠測試"
 msgid "Please test your mouse:"
 msgstr "請測試您的滑鼠："
 
-#: standalone/net_applet:45
+#: standalone/net_applet:43
 #, c-format
 msgid "Network is up on interface %s"
 msgstr "網路已經由介面 %s 啟動"
 
 #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
+#: standalone/net_applet:51
 #, c-format
 msgid "Network is down on interface %s. Click on \"Configure Network\""
 msgstr "網路介面 %s 是關閉的。請點選 \"設定網路\""
 
-#: standalone/net_applet:68 standalone/net_monitor:474
+#: standalone/net_applet:66 standalone/net_monitor:471
 #, c-format
 msgid "Connect %s"
 msgstr "連線到 %s"
 
-#: standalone/net_applet:69 standalone/net_monitor:474
+#: standalone/net_applet:67 standalone/net_monitor:471
 #, c-format
 msgid "Disconnect %s"
 msgstr "中斷與 %s 的連線"
 
-#: standalone/net_applet:70
+#: standalone/net_applet:68
 #, c-format
 msgid "Monitor Network"
 msgstr "監控網路"
 
-#: standalone/net_applet:71
+#: standalone/net_applet:69
 #, c-format
 msgid "Manage wireless networks"
 msgstr ""
 
-#: standalone/net_applet:72
+#: standalone/net_applet:70
 #, c-format
 msgid "Configure Network"
 msgstr "設定網路"
 
-#: standalone/net_applet:74
+#: standalone/net_applet:72
 #, fuzzy, c-format
 msgid "Watched interface"
 msgstr "介面"
 
-#: standalone/net_applet:83
+#: standalone/net_applet:81
 #, c-format
 msgid "Profiles"
 msgstr ")定檔案"
 
-#: standalone/net_applet:92
+#: standalone/net_applet:90
 #, c-format
 msgid "Get Online Help"
 msgstr "取得線上說明"
 
-#: standalone/net_applet:224
+#: standalone/net_applet:213
 #, fuzzy, c-format
 msgid "Interactive intrusion detection"
 msgstr "印表機自動偵測"
 
-#: standalone/net_applet:228
+#: standalone/net_applet:217
 #, c-format
 msgid "Always launch on startup"
 msgstr "總是在啟動時執行"
 
-#: standalone/net_applet:281
+#: standalone/net_applet:270
 #, c-format
 msgid "A port scanning attack has been attempted by %s."
 msgstr "%s 試圖發動通訊埠掃描攻擊未遂。"
 
-#: standalone/net_applet:282
+#: standalone/net_applet:271
 #, c-format
 msgid "The %s service has been attacked by %s."
 msgstr "%s 服務被 %s 攻擊。"
 
-#: standalone/net_applet:283
+#: standalone/net_applet:272
 #, c-format
 msgid "A password cracking attack has been attempted by %s."
 msgstr "%s 試圖發動密碼破解攻擊未遂。"
 
-#: standalone/net_applet:291
+#: standalone/net_applet:280
 #, fuzzy, c-format
 msgid "Active Firewall: intrusion detected"
 msgstr "防火牆設定已經偵測到了!"
 
-#: standalone/net_applet:302
+#: standalone/net_applet:291
 #, c-format
 msgid "Do you want to blacklist the attacker?"
 msgstr "您要將攻擊者列入黑名單嗎？"
 
-#: standalone/net_applet:316
+#: standalone/net_applet:305
 #, c-format
 msgid "Always blacklist (do not ask again)"
 msgstr "總是自動列入黑名單 (不要再問)"
 
-#: standalone/net_applet:319
+#: standalone/net_applet:308
 #, c-format
 msgid "Attack details"
 msgstr "詳細的攻擊資訊"
 
-#: standalone/net_applet:323
+#: standalone/net_applet:312
 #, c-format
 msgid "Attack time: %s"
 msgstr "攻擊時間： %s"
 
-#: standalone/net_applet:324
+#: standalone/net_applet:313
 #, c-format
 msgid "Network interface: %s"
 msgstr "網路介面： %s"
 
-#: standalone/net_applet:325
+#: standalone/net_applet:314
 #, c-format
 msgid "Attack type: %s"
 msgstr "攻擊型態： %s"
 
-#: standalone/net_applet:326
+#: standalone/net_applet:315
 #, c-format
 msgid "Protocol: %s"
 msgstr "通訊協定： %s"
 
-#: standalone/net_applet:327
+#: standalone/net_applet:316
 #, c-format
 msgid "Attacker IP address: %s"
 msgstr "攻擊者 IP 位址： %s"
 
-#: standalone/net_applet:328
+#: standalone/net_applet:317
 #, c-format
 msgid "Attacker hostname: %s"
 msgstr "攻擊者主機名稱： %s"
 
-#: standalone/net_applet:329
+#: standalone/net_applet:318
 #, c-format
 msgid "Service attacked: %s"
 msgstr "被攻擊的服務： %s"
 
-#: standalone/net_applet:330
+#: standalone/net_applet:319
 #, c-format
 msgid "Port attacked: %s"
 msgstr "被攻擊的連接埠： %s"
 
-#: standalone/net_applet:331
+#: standalone/net_applet:320
 #, c-format
 msgid "Type of ICMP attack: %s"
 msgstr "ICMP 的攻擊型態： %s"
 
-#: standalone/net_monitor:61 standalone/net_monitor:66
+#: standalone/net_monitor:58 standalone/net_monitor:63
 #, c-format
 msgid "Network Monitoring"
 msgstr "網路監控"
 
-#: standalone/net_monitor:104
+#: standalone/net_monitor:101
 #, c-format
 msgid "Global statistics"
 msgstr ""
 
-#: standalone/net_monitor:107
+#: standalone/net_monitor:104
 #, c-format
 msgid "Instantaneous"
 msgstr "瞬間"
 
-#: standalone/net_monitor:107
+#: standalone/net_monitor:104
 #, c-format
 msgid "Average"
 msgstr "平均"
 
-#: standalone/net_monitor:108
+#: standalone/net_monitor:105
 #, c-format
 msgid ""
 "Sending\n"
@@ -23712,7 +23599,7 @@ msgstr ""
 "上傳\n"
 "速度："
 
-#: standalone/net_monitor:109
+#: standalone/net_monitor:106
 #, c-format
 msgid ""
 "Receiving\n"
@@ -23721,7 +23608,7 @@ msgstr ""
 "下載\n"
 "速度："
 
-#: standalone/net_monitor:113
+#: standalone/net_monitor:110
 #, c-format
 msgid ""
 "Connection\n"
@@ -23730,42 +23617,42 @@ msgstr ""
 "連線\n"
 "時間： "
 
-#: standalone/net_monitor:120
+#: standalone/net_monitor:117
 #, c-format
 msgid "Use same scale for received and transmitted"
 msgstr "對接收與傳送使用相同的度量"
 
-#: standalone/net_monitor:139
+#: standalone/net_monitor:136
 #, c-format
 msgid "Wait please, testing your connection..."
 msgstr "請稍候，正在測試您的連線..."
 
-#: standalone/net_monitor:188 standalone/net_monitor:201
+#: standalone/net_monitor:185 standalone/net_monitor:198
 #, c-format
 msgid "Disconnecting from Internet "
 msgstr "正在中斷與網際網路的連線"
 
-#: standalone/net_monitor:188 standalone/net_monitor:201
+#: standalone/net_monitor:185 standalone/net_monitor:198
 #, c-format
 msgid "Connecting to Internet "
 msgstr "連線到網際網路"
 
-#: standalone/net_monitor:232
+#: standalone/net_monitor:229
 #, c-format
 msgid "Disconnection from Internet failed."
 msgstr "中斷與網際網路的連線失敗。"
 
-#: standalone/net_monitor:233
+#: standalone/net_monitor:230
 #, c-format
 msgid "Disconnection from Internet complete."
 msgstr "成功的中斷與網際網路的連線。"
 
-#: standalone/net_monitor:235
+#: standalone/net_monitor:232
 #, c-format
 msgid "Connection complete."
 msgstr "連線完成。"
 
-#: standalone/net_monitor:236
+#: standalone/net_monitor:233
 #, c-format
 msgid ""
 "Connection failed.\n"
@@ -23774,39 +23661,39 @@ msgstr ""
 "連線失敗。\n"
 "請檢查您在 Mandriva Linux 控制中心的設定。"
 
-#: standalone/net_monitor:341
+#: standalone/net_monitor:338
 #, c-format
 msgid "Color configuration"
 msgstr "顏色設定"
 
-#: standalone/net_monitor:389 standalone/net_monitor:409
+#: standalone/net_monitor:386 standalone/net_monitor:406
 #, c-format
 msgid "sent: "
 msgstr "傳送："
 
-#: standalone/net_monitor:396 standalone/net_monitor:413
+#: standalone/net_monitor:393 standalone/net_monitor:410
 #, c-format
 msgid "received: "
 msgstr "接收："
 
-#: standalone/net_monitor:403
+#: standalone/net_monitor:400
 #, c-format
 msgid "average"
 msgstr "平均"
 
-#: standalone/net_monitor:406
+#: standalone/net_monitor:403
 #, fuzzy, c-format
 msgid "Local measure"
 msgstr "LocaleDrake"
 
-#: standalone/net_monitor:467
+#: standalone/net_monitor:464
 #, fuzzy, c-format
 msgid ""
 "Warning, another internet connection has been detected, maybe using your "
 "network"
 msgstr "警告，偵測到您系統上有其他的網路連線，也許正在使用您的網路服務"
 
-#: standalone/net_monitor:478
+#: standalone/net_monitor:475
 #, c-format
 msgid "No internet connection configured"
 msgstr "沒有設定好的網路連線設定"
@@ -24590,6 +24477,90 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安裝失敗"
 
+#~ msgid "use PPPoE"
+#~ msgstr "使用 PPPoE"
+
+#~ msgid "use PPTP"
+#~ msgstr "使用 PPTP"
+
+#~ msgid "use DHCP"
+#~ msgstr "使用 DHCP"
+
+#~ msgid "Alcatel Speedtouch USB"
+#~ msgstr "Alcatel Speedtouch USB"
+
+#~ msgid " - detected"
+#~ msgstr " - 已偵測到"
+
+#~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
+#~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 等等管理程式"
+
+#~ msgid ""
+#~ "Warning, another Internet connection has been detected, maybe using your "
+#~ "network"
+#~ msgstr "警告，偵測到其他的網路連線，也許對方正在使用您的網路"
+
+#, fuzzy
+#~ msgid "PXE Server Configuration"
+#~ msgstr "dhcpd 服務主機設定"
+
+#, fuzzy
+#~ msgid "Installation Server Configuration"
+#~ msgstr "dhcpd 服務主機設定"
+
+#, fuzzy
+#~ msgid ""
+#~ "You are about to configure your computer to install a PXE server as a "
+#~ "DHCP server\n"
+#~ "and a TFTP server to build an installation server.\n"
+#~ "With that feature, other computers on your local network will be "
+#~ "installable using this computer as source.\n"
+#~ "\n"
+#~ "Make sure you have configured your Network/Internet access using "
+#~ "drakconnect before going any further.\n"
+#~ "\n"
+#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
+#~ "(LAN)."
+#~ msgstr ""
+#~ "目前要進行Internet連線分享的設定, 這個功能能夠\n"
+#~ "讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
+#~ "連上 Internet。請注意: 您需要另外一張網路卡以便\n"
+#~ "於提供區域網路電腦連線存取分享使用。"
+
+#~ msgid "No network adapter on your system!"
+#~ msgstr "您系統並沒有網路卡存在"
+
+#~ msgid "Choose the network interface"
+#~ msgstr "選取網路介面"
+
+#, fuzzy
+#~ msgid ""
+#~ "Please choose which network interface will be used for the dhcp server."
+#~ msgstr "請選擇您要用來連上 Internet 的網路卡"
+
+#, fuzzy
+#~ msgid "Interface %s (on network %s)"
+#~ msgstr "介面 %s (使用 %s 模組)"
+
+#~ msgid "The DHCP start ip"
+#~ msgstr "DHCP 開始 ip"
+
+#, fuzzy
+#~ msgid "The DHCP end ip"
+#~ msgstr "DHCP 結束範圍"
+
+#, fuzzy
+#~ msgid "Installation image directory"
+#~ msgstr "Xpmac (顯示卡驅動程式的安裝)"
+
+#, fuzzy
+#~ msgid "No image found"
+#~ msgstr "找不到印表機！"
+
+#, fuzzy
+#~ msgid "Location of auto_install.cfg file"
+#~ msgstr "正在製作自動安裝軟片"
+
 #~ msgid "Do it later"
 #~ msgstr "稍後再執行"