Updated POT.

1 files changed, 2835 insertions, 3016 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 2700b4d89..2c59a6091 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-09-04 21:26+0800\n"
+"POT-Creation-Date: 2005-09-08 00:35+0800\n"
 "PO-Revision-Date: 2005-09-06 19:18+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@xuite.net>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -37,16 +37,17 @@ msgstr "您想要格式化那一個 USB 隨身碟？"
 #: ../move/move.pm:296
 #, c-format
 msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on it.\n"
+"You are about to format a USB device \"%s\". This will delete all data on "
+"it.\n"
 "Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this operation."
+"We advise you to unplug all other USB storage devices while doing this "
+"operation."
 msgstr ""
 "您正要格式化 USB 裝置 \"%s\"。這將會刪除它裡面所有的資料。\n"
 "請確認這個選取的裝置是您要格式化的 USB 隨身碟。\n"
 "我們建議您在進行這個動作的時候移除所有其它的 USB 儲存裝置。"
 
-#: ../move/move.pm:448
-#: ../move/move.pm:460
+#: ../move/move.pm:448 ../move/move.pm:460
 #, c-format
 msgid "Key is not writable"
 msgstr "無法寫入隨身碟"
@@ -65,8 +66,7 @@ msgstr ""
 msgid "Retry"
 msgstr "重試"
 
-#: ../move/move.pm:453
-#: ../move/move.pm:497
+#: ../move/move.pm:453 ../move/move.pm:497
 #, c-format
 msgid "Continue without USB key"
 msgstr "不用 USB 隨身碟而繼續"
@@ -87,9 +87,7 @@ msgstr ""
 "請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n"
 "新插入隨身碟，最後重新啟動 Mandriva Move。"
 
-#: ../move/move.pm:468
-#: help.pm:409
-#: install_steps_interactive.pm:1320
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1322
 #, c-format
 msgid "Reboot"
 msgstr "重新開機"
@@ -175,181 +173,88 @@ msgstr "自動設定"
 msgid "Please wait, detecting and configuring devices..."
 msgstr "請稍候，正在偵測與設定裝置中..."
 
-#: ../move/move.pm:604
-#: ../move/move.pm:660
-#: ../move/move.pm:664
-#: diskdrake/dav.pm:75
-#: diskdrake/hd_gtk.pm:113
-#: diskdrake/interactive.pm:230
-#: diskdrake/interactive.pm:243
-#: diskdrake/interactive.pm:404
-#: diskdrake/interactive.pm:422
-#: diskdrake/interactive.pm:558
-#: diskdrake/interactive.pm:563
-#: diskdrake/smbnfs_gtk.pm:41
-#: do_pkgs.pm:19
-#: do_pkgs.pm:37
-#: fsedit.pm:209
-#: install_any.pm:1754
-#: install_any.pm:1806
-#: install_steps.pm:81
-#: install_steps_interactive.pm:37
-#: interactive/http.pm:117
-#: interactive/http.pm:118
-#: network/ndiswrapper.pm:27
-#: network/ndiswrapper.pm:42
-#: network/ndiswrapper.pm:89
-#: network/ndiswrapper.pm:101
-#: network/netconnect.pm:908
-#: network/netconnect.pm:912
-#: network/netconnect.pm:916
-#: network/netconnect.pm:921
-#: network/netconnect.pm:1065
-#: network/netconnect.pm:1069
-#: network/netconnect.pm:1187
-#: network/netconnect.pm:1192
-#: network/netconnect.pm:1212
-#: network/netconnect.pm:1365
-#: network/thirdparty.pm:266
-#: network/thirdparty.pm:273
-#: network/thirdparty.pm:309
-#: network/thirdparty.pm:311
-#: network/thirdparty.pm:332
-#: network/thirdparty.pm:356
-#: printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251
-#: printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422
-#: printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440
-#: printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514
-#: printer/printerdrake.pm:686
-#: printer/printerdrake.pm:690
-#: printer/printerdrake.pm:772
-#: printer/printerdrake.pm:1576
-#: printer/printerdrake.pm:1624
-#: printer/printerdrake.pm:1661
-#: printer/printerdrake.pm:1706
-#: printer/printerdrake.pm:1710
-#: printer/printerdrake.pm:1724
-#: printer/printerdrake.pm:1816
-#: printer/printerdrake.pm:1897
-#: printer/printerdrake.pm:1901
-#: printer/printerdrake.pm:1905
-#: printer/printerdrake.pm:1954
-#: printer/printerdrake.pm:2012
-#: printer/printerdrake.pm:2016
-#: printer/printerdrake.pm:2030
-#: printer/printerdrake.pm:2150
-#: printer/printerdrake.pm:2154
-#: printer/printerdrake.pm:2197
-#: printer/printerdrake.pm:2272
-#: printer/printerdrake.pm:2290
-#: printer/printerdrake.pm:2299
-#: printer/printerdrake.pm:2308
-#: printer/printerdrake.pm:2319
-#: printer/printerdrake.pm:2383
-#: printer/printerdrake.pm:2478
-#: printer/printerdrake.pm:3032
-#: printer/printerdrake.pm:3316
-#: printer/printerdrake.pm:3322
-#: printer/printerdrake.pm:3886
-#: printer/printerdrake.pm:3890
-#: printer/printerdrake.pm:3894
-#: printer/printerdrake.pm:4355
-#: printer/printerdrake.pm:4596
-#: printer/printerdrake.pm:4620
-#: printer/printerdrake.pm:4697
-#: printer/printerdrake.pm:4763
-#: printer/printerdrake.pm:4883
-#: standalone/drakTermServ:394
-#: standalone/drakTermServ:464
-#: standalone/drakTermServ:473
-#: standalone/drakTermServ:774
-#: standalone/drakTermServ:781
-#: standalone/drakTermServ:802
-#: standalone/drakTermServ:849
-#: standalone/drakTermServ:1095
-#: standalone/drakTermServ:1572
-#: standalone/drakTermServ:1588
-#: standalone/drakTermServ:1593
-#: standalone/drakTermServ:1601
-#: standalone/drakTermServ:1613
-#: standalone/drakTermServ:1634
-#: standalone/drakauth:36
-#: standalone/drakbackup:498
-#: standalone/drakbackup:612
-#: standalone/drakbackup:1093
-#: standalone/drakbackup:1125
-#: standalone/drakbackup:1648
-#: standalone/drakbackup:1804
-#: standalone/drakbackup:2429
-#: standalone/drakbackup:4118
-#: standalone/drakbackup:4338
-#: standalone/drakclock:124
-#: standalone/drakconnect:676
-#: standalone/drakconnect:680
-#: standalone/drakconnect:685
-#: standalone/drakconnect:700
-#: standalone/drakfont:210
-#: standalone/drakfont:223
-#: standalone/drakfont:261
-#: standalone/drakgw:50
-#: standalone/drakgw:188
-#: standalone/drakhosts:98
-#: standalone/drakhosts:246
-#: standalone/drakhosts:253
-#: standalone/drakhosts:260
-#: standalone/draknfs:306
-#: standalone/draknfs:609
-#: standalone/draknfs:616
-#: standalone/draknfs:623
-#: standalone/drakroam:29
-#: standalone/draksambashare:379
-#: standalone/draksambashare:383
-#: standalone/draksambashare:386
-#: standalone/draksambashare:389
-#: standalone/draksambashare:449
-#: standalone/draksambashare:473
-#: standalone/draksambashare:547
-#: standalone/draksambashare:629
-#: standalone/draksambashare:696
-#: standalone/draksambashare:796
-#: standalone/draksambashare:803
-#: standalone/draksambashare:938
-#: standalone/draksambashare:1129
-#: standalone/draksambashare:1138
-#: standalone/draksambashare:1147
-#: standalone/draksambashare:1168
-#: standalone/draksambashare:1177
-#: standalone/draksambashare:1186
-#: standalone/draksambashare:1206
-#: standalone/draksambashare:1214
-#: standalone/draksambashare:1226
-#: standalone/draksplash:163
-#: standalone/drakxtv:107
-#: standalone/finish-install:49
-#: standalone/logdrake:168
-#: standalone/logdrake:437
-#: standalone/logdrake:442
-#: standalone/scannerdrake:59
-#: standalone/scannerdrake:202
-#: standalone/scannerdrake:261
-#: standalone/scannerdrake:715
-#: standalone/scannerdrake:726
-#: standalone/scannerdrake:865
-#: standalone/scannerdrake:876
-#: standalone/scannerdrake:946
-#: wizards.pm:95
-#: wizards.pm:99
-#: wizards.pm:121
+#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
+#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
+#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
+#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
+#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1754
+#: install_any.pm:1806 install_steps.pm:81 install_steps_interactive.pm:37
+#: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27
+#: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89
+#: network/ndiswrapper.pm:101 network/netconnect.pm:908
+#: network/netconnect.pm:912 network/netconnect.pm:916
+#: network/netconnect.pm:921 network/netconnect.pm:1065
+#: network/netconnect.pm:1069 network/netconnect.pm:1188
+#: network/netconnect.pm:1193 network/netconnect.pm:1213
+#: network/netconnect.pm:1366 network/thirdparty.pm:291
+#: network/thirdparty.pm:298 network/thirdparty.pm:334
+#: network/thirdparty.pm:336 network/thirdparty.pm:357
+#: network/thirdparty.pm:381 printer/printerdrake.pm:244
+#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
+#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
+#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:686
+#: printer/printerdrake.pm:690 printer/printerdrake.pm:772
+#: printer/printerdrake.pm:1576 printer/printerdrake.pm:1624
+#: printer/printerdrake.pm:1661 printer/printerdrake.pm:1706
+#: printer/printerdrake.pm:1710 printer/printerdrake.pm:1724
+#: printer/printerdrake.pm:1816 printer/printerdrake.pm:1897
+#: printer/printerdrake.pm:1901 printer/printerdrake.pm:1905
+#: printer/printerdrake.pm:1954 printer/printerdrake.pm:2012
+#: printer/printerdrake.pm:2016 printer/printerdrake.pm:2030
+#: printer/printerdrake.pm:2150 printer/printerdrake.pm:2154
+#: printer/printerdrake.pm:2197 printer/printerdrake.pm:2272
+#: printer/printerdrake.pm:2290 printer/printerdrake.pm:2299
+#: printer/printerdrake.pm:2308 printer/printerdrake.pm:2319
+#: printer/printerdrake.pm:2383 printer/printerdrake.pm:2478
+#: printer/printerdrake.pm:3037 printer/printerdrake.pm:3321
+#: printer/printerdrake.pm:3327 printer/printerdrake.pm:3891
+#: printer/printerdrake.pm:3895 printer/printerdrake.pm:3899
+#: printer/printerdrake.pm:4360 printer/printerdrake.pm:4601
+#: printer/printerdrake.pm:4629 printer/printerdrake.pm:4706
+#: printer/printerdrake.pm:4772 printer/printerdrake.pm:4892
+#: standalone/drakTermServ:394 standalone/drakTermServ:464
+#: standalone/drakTermServ:473 standalone/drakTermServ:774
+#: standalone/drakTermServ:781 standalone/drakTermServ:802
+#: standalone/drakTermServ:849 standalone/drakTermServ:1095
+#: standalone/drakTermServ:1572 standalone/drakTermServ:1588
+#: standalone/drakTermServ:1593 standalone/drakTermServ:1601
+#: standalone/drakTermServ:1613 standalone/drakTermServ:1634
+#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
+#: standalone/drakbackup:1093 standalone/drakbackup:1125
+#: standalone/drakbackup:1648 standalone/drakbackup:1804
+#: standalone/drakbackup:2429 standalone/drakbackup:4118
+#: standalone/drakbackup:4338 standalone/drakclock:124
+#: standalone/drakconnect:676 standalone/drakconnect:680
+#: standalone/drakconnect:685 standalone/drakconnect:700
+#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
+#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
+#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
+#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
+#: standalone/draknfs:623 standalone/drakroam:29 standalone/draksambashare:379
+#: standalone/draksambashare:383 standalone/draksambashare:386
+#: standalone/draksambashare:389 standalone/draksambashare:449
+#: standalone/draksambashare:473 standalone/draksambashare:547
+#: standalone/draksambashare:629 standalone/draksambashare:696
+#: standalone/draksambashare:796 standalone/draksambashare:803
+#: standalone/draksambashare:938 standalone/draksambashare:1129
+#: standalone/draksambashare:1138 standalone/draksambashare:1147
+#: standalone/draksambashare:1168 standalone/draksambashare:1177
+#: standalone/draksambashare:1186 standalone/draksambashare:1206
+#: standalone/draksambashare:1214 standalone/draksambashare:1226
+#: standalone/draksplash:163 standalone/drakxtv:107
+#: standalone/finish-install:49 standalone/logdrake:168
+#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
+#: standalone/scannerdrake:202 standalone/scannerdrake:261
+#: standalone/scannerdrake:715 standalone/scannerdrake:726
+#: standalone/scannerdrake:865 standalone/scannerdrake:876
+#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
 #, c-format
 msgid "Error"
 msgstr "錯誤"
 
-#: ../move/move.pm:605
-#: install_steps.pm:82
+#: ../move/move.pm:605 install_steps.pm:82
 #, c-format
 msgid ""
 "An error occurred, but I do not know how to handle it nicely.\n"
@@ -358,8 +263,7 @@ msgstr ""
 "發生了一個錯誤，但我不知道該如何妥善處置它。\n"
 "要繼續安裝工作的話請小心。"
 
-#: ../move/move.pm:660
-#: install_steps_interactive.pm:37
+#: ../move/move.pm:660 install_steps_interactive.pm:37
 #, c-format
 msgid "An error occurred"
 msgstr "發生一個錯誤"
@@ -407,8 +311,7 @@ msgstr "移除系統設定檔案"
 msgid "Simply reboot"
 msgstr "只要重新開機"
 
-#: ../move/tree/mdk_totem:50
-#: ../move/tree/mdk_totem:96
+#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
 #, c-format
 msgid "You can only run with no CDROM support"
 msgstr "您只能在沒有光碟機支援的狀態下執行"
@@ -423,10 +326,8 @@ msgstr "結束那些程式"
 msgid "No CDROM support"
 msgstr "沒有光碟機支援"
 
-#: ../move/tree/mdk_totem:76
-#: diskdrake/hd_gtk.pm:92
-#: diskdrake/interactive.pm:1052
-#: diskdrake/interactive.pm:1062
+#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
+#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
 #: diskdrake/interactive.pm:1115
 #, c-format
 msgid "Read carefully!"
@@ -550,14 +451,12 @@ msgstr "使用 Xinerama 全景延伸顯示"
 msgid "Configure only card \"%s\"%s"
 msgstr "僅設定 \"%s\"%s 顯示卡"
 
-#: Xconfig/card.pm:404
-#: Xconfig/various.pm:23
+#: Xconfig/card.pm:404 Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:411
-#: Xconfig/various.pm:22
+#: Xconfig/card.pm:411 Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr "Xorg %s 包含 3D 硬體加速功能"
@@ -581,31 +480,18 @@ msgstr ""
 "您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n"
 "但是請注意，這是實驗性質的支援項目，而且可能會使您的電腦停止回應。"
 
-#: Xconfig/main.pm:90
-#: Xconfig/main.pm:91
-#: Xconfig/monitor.pm:116
-#: any.pm:973
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: Xconfig/main.pm:115
-#: diskdrake/dav.pm:26
-#: help.pm:14
-#: install_steps_interactive.pm:86
-#: install_steps_interactive.pm:1320
-#: printer/printerdrake.pm:882
-#: printer/printerdrake.pm:899
-#: printer/printerdrake.pm:4692
-#: printer/printerdrake.pm:5147
-#: standalone/drakhosts:263
-#: standalone/drakids:62
-#: standalone/drakids:71
-#: standalone/drakids:79
-#: standalone/drakroam:168
-#: standalone/draksplash:94
-#: standalone/logdrake:173
-#: standalone/net_applet:82
+#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
+#: install_steps_interactive.pm:86 install_steps_interactive.pm:1322
+#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
+#: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165
+#: standalone/drakhosts:263 standalone/drakids:62 standalone/drakids:71
+#: standalone/drakids:79 standalone/drakroam:168 standalone/draksplash:94
+#: standalone/logdrake:173 standalone/net_applet:82
 #: standalone/scannerdrake:477
 #, c-format
 msgid "Quit"
@@ -616,14 +502,12 @@ msgstr "離開"
 msgid "Graphic Card"
 msgstr "顯示卡"
 
-#: Xconfig/main.pm:120
-#: Xconfig/monitor.pm:110
+#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
 #, c-format
 msgid "Monitor"
 msgstr "螢幕"
 
-#: Xconfig/main.pm:123
-#: Xconfig/resolution_and_depth.pm:287
+#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:287
 #, c-format
 msgid "Resolution"
 msgstr "解析度"
@@ -633,13 +517,9 @@ msgstr "解析度"
 msgid "Test"
 msgstr "測試"
 
-#: Xconfig/main.pm:133
-#: diskdrake/dav.pm:65
-#: diskdrake/interactive.pm:448
-#: diskdrake/removable.pm:24
-#: diskdrake/smbnfs_gtk.pm:79
-#: printer/printerdrake.pm:1125
-#: standalone/drakfont:491
+#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
+#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
+#: printer/printerdrake.pm:1125 standalone/drakfont:491
 #: standalone/drakfont:554
 #, c-format
 msgid "Options"
@@ -678,15 +558,12 @@ msgstr "選取一個螢幕"
 msgid "Plug'n Play"
 msgstr "隨插即用"
 
-#: Xconfig/monitor.pm:118
-#: mouse.pm:49
+#: Xconfig/monitor.pm:118 mouse.pm:49
 #, c-format
 msgid "Generic"
 msgstr "一般"
 
-#: Xconfig/monitor.pm:119
-#: standalone/drakconnect:591
-#: standalone/harddrake2:54
+#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
 #: standalone/harddrake2:88
 #, c-format
 msgid "Vendor"
@@ -700,12 +577,15 @@ msgstr "隨插即用顯示器偵測失敗，請選擇正確的螢幕"
 #: Xconfig/monitor.pm:137
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the rate\n"
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
 "at which the whole screen is refreshed, and most importantly the horizontal\n"
 "sync rate, which is the rate at which scanlines are displayed.\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
-"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
 " If in doubt, choose a conservative setting."
 msgstr ""
 "這兩個重要的參數是您螢幕的垂直更新頻率，以及最重要\n"
@@ -751,13 +631,9 @@ msgstr "1 千 6 百萬色 (24 位元)"
 msgid "Resolutions"
 msgstr "解析度"
 
-#: Xconfig/resolution_and_depth.pm:309
-#: diskdrake/hd_gtk.pm:336
-#: install_steps_gtk.pm:288
-#: mouse.pm:168
-#: services.pm:162
-#: standalone/drakbackup:1586
-#: standalone/drakperm:250
+#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
+#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
+#: standalone/drakbackup:1586 standalone/drakperm:250
 #, c-format
 msgid "Other"
 msgstr "其他"
@@ -772,98 +648,46 @@ msgstr "選取解析度以及顏色深度"
 msgid "Graphics card: %s"
 msgstr "顯示卡：%s"
 
-#: Xconfig/resolution_and_depth.pm:373
-#: interactive.pm:119
-#: interactive.pm:436
-#: interactive/http.pm:103
-#: interactive/http.pm:156
-#: interactive/newt.pm:321
-#: interactive/stdio.pm:39
-#: interactive/stdio.pm:142
-#: interactive/stdio.pm:143
-#: standalone/drakTermServ:195
-#: standalone/drakTermServ:515
-#: standalone/drakbackup:1350
-#: standalone/drakbackup:3975
-#: standalone/drakbackup:4035
-#: standalone/drakbackup:4079
-#: standalone/drakconnect:158
-#: standalone/drakconnect:852
-#: standalone/drakconnect:939
-#: standalone/drakconnect:1030
-#: standalone/drakfont:575
-#: standalone/drakfont:585
-#: standalone/draksplash:174
-#: standalone/drakups:212
-#: standalone/net_monitor:339
-#: ugtk2.pm:412
-#: ugtk2.pm:510
-#: ugtk2.pm:919
-#: ugtk2.pm:942
+#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
+#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
+#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
+#: standalone/drakTermServ:195 standalone/drakTermServ:515
+#: standalone/drakbackup:1350 standalone/drakbackup:3975
+#: standalone/drakbackup:4035 standalone/drakbackup:4079
+#: standalone/drakconnect:158 standalone/drakconnect:852
+#: standalone/drakconnect:939 standalone/drakconnect:1030
+#: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:174
+#: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:412 ugtk2.pm:510
+#: ugtk2.pm:919 ugtk2.pm:942
 #, c-format
 msgid "Ok"
 msgstr "確定"
 
-#: Xconfig/resolution_and_depth.pm:373
-#: diskdrake/smbnfs_gtk.pm:80
-#: help.pm:89
-#: help.pm:444
-#: install_steps_gtk.pm:458
-#: install_steps_interactive.pm:425
-#: install_steps_interactive.pm:830
-#: interactive.pm:120
-#: interactive.pm:437
-#: interactive/http.pm:104
-#: interactive/http.pm:160
-#: interactive/newt.pm:318
-#: interactive/stdio.pm:39
-#: interactive/stdio.pm:142
-#: printer/printerdrake.pm:3966
-#: standalone/drakautoinst:215
-#: standalone/drakbackup:1350
-#: standalone/drakbackup:3901
-#: standalone/drakbackup:3905
-#: standalone/drakbackup:3963
-#: standalone/drakconnect:157
-#: standalone/drakconnect:937
-#: standalone/drakconnect:1029
-#: standalone/drakfont:585
-#: standalone/drakfont:663
-#: standalone/drakfont:740
-#: standalone/draksplash:174
-#: standalone/drakups:219
-#: standalone/logdrake:173
-#: standalone/net_monitor:338
-#: ugtk2.pm:406
-#: ugtk2.pm:508
-#: ugtk2.pm:517
-#: ugtk2.pm:919
+#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
+#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:425
+#: install_steps_interactive.pm:830 interactive.pm:120 interactive.pm:437
+#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
+#: interactive/stdio.pm:39 interactive/stdio.pm:142
+#: printer/printerdrake.pm:3971 standalone/drakautoinst:215
+#: standalone/drakbackup:1350 standalone/drakbackup:3901
+#: standalone/drakbackup:3905 standalone/drakbackup:3963
+#: standalone/drakconnect:157 standalone/drakconnect:937
+#: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663
+#: standalone/drakfont:740 standalone/draksplash:174 standalone/drakups:219
+#: standalone/logdrake:173 standalone/net_monitor:338 ugtk2.pm:406
+#: ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:919
 #, c-format
 msgid "Cancel"
 msgstr "取消"
 
-#: Xconfig/resolution_and_depth.pm:373
-#: diskdrake/hd_gtk.pm:150
-#: install_steps_gtk.pm:232
-#: install_steps_gtk.pm:620
-#: interactive.pm:564
-#: interactive/gtk.pm:681
-#: interactive/gtk.pm:683
-#: standalone/drakTermServ:284
-#: standalone/drakbackup:3897
-#: standalone/drakbug:105
-#: standalone/drakconnect:153
-#: standalone/drakconnect:236
-#: standalone/drakfont:510
-#: standalone/draknfs:206
-#: standalone/drakperm:133
-#: standalone/draksambashare:314
-#: standalone/draksec:336
-#: standalone/draksec:338
-#: standalone/draksec:356
-#: standalone/draksec:358
-#: ugtk2.pm:1051
-#: ugtk2.pm:1052
+#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
+#: install_steps_gtk.pm:232 install_steps_gtk.pm:620 interactive.pm:564
+#: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
+#: standalone/drakbackup:3897 standalone/drakbug:105
+#: standalone/drakconnect:153 standalone/drakconnect:236
+#: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
+#: standalone/draksambashare:314 standalone/draksec:342 standalone/draksec:344
+#: standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1051 ugtk2.pm:1052
 #, c-format
 msgid "Help"
 msgstr "輔助說明"
@@ -967,7 +791,8 @@ msgstr "開機時啟動圖形介面"
 #: Xconfig/various.pm:74
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface (Xorg) upon booting.\n"
+"I can setup your computer to automatically start the graphical interface "
+"(Xorg) upon booting.\n"
 "Would you like Xorg to start when you reboot?"
 msgstr ""
 "我可以設定您的電腦在開機時自動啟動圖形介面 (Xorg)，\n"
@@ -979,7 +804,8 @@ msgid ""
 "Your graphic card seems to have a TV-OUT connector.\n"
 "It can be configured to work using frame-buffer.\n"
 "\n"
-"For this you have to plug your graphic card to your TV before booting your computer.\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
 "Then choose the \"TVout\" entry in the bootloader\n"
 "\n"
 "Do you have this feature?"
@@ -1004,16 +830,9 @@ msgid ""
 "other"
 msgstr "其他"
 
-#: any.pm:142
-#: harddrake/sound.pm:192
-#: interactive.pm:474
-#: pkgs.pm:473
-#: standalone/drakconnect:160
-#: standalone/drakconnect:635
-#: standalone/draksec:68
-#: standalone/drakups:101
-#: standalone/drakxtv:92
-#: standalone/harddrake2:246
+#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
+#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
+#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
 #: standalone/service_harddrake:207
 #, c-format
 msgid "Please wait"
@@ -1028,7 +847,8 @@ msgstr "開機載入程式安裝中"
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.\n"
+"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
+"error.\n"
 "This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
 "\n"
 "Assign a new Volume ID?"
@@ -1065,7 +885,8 @@ msgstr ""
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
 "\n"
 "On which drive are you booting?"
 msgstr ""
@@ -1075,8 +896,7 @@ msgstr ""
 "\n"
 "您目前是用那顆硬碟開機呢？"
 
-#: any.pm:231
-#: help.pm:739
+#: any.pm:231 help.pm:739
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "硬碟的第一個扇區 (MBR)"
@@ -1091,9 +911,7 @@ msgstr "根分割區的第一扇區"
 msgid "On Floppy"
 msgstr "在軟碟機"
 
-#: any.pm:236
-#: help.pm:739
-#: printer/printerdrake.pm:4352
+#: any.pm:236 help.pm:739 printer/printerdrake.pm:4357
 #, c-format
 msgid "Skip"
 msgstr "略過"
@@ -1108,16 +926,12 @@ msgstr "LILO/GRUB 安裝"
 msgid "Where do you want to install the bootloader?"
 msgstr "您要將開機載入程式安裝在那裡？"
 
-#: any.pm:267
-#: standalone/drakboot:269
+#: any.pm:267 standalone/drakboot:269
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:269
-#: any.pm:270
-#: any.pm:303
-#: any.pm:304
+#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入程式主要選項"
@@ -1129,32 +943,26 @@ msgstr "輸入記憶體大小 (以 MB 為單位)"
 
 #: any.pm:277
 #, c-format
-msgid "Option ``Restrict command line options'' is of no use without a password"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
 msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
 
-#: any.pm:278
-#: any.pm:615
-#: authentication.pm:181
+#: any.pm:278 any.pm:615 authentication.pm:181
 #, c-format
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:278
-#: any.pm:615
-#: authentication.pm:181
-#: diskdrake/interactive.pm:1326
+#: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
 
-#: any.pm:283
-#: any.pm:308
+#: any.pm:283 any.pm:308
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入程式"
 
-#: any.pm:285
-#: any.pm:310
+#: any.pm:285 any.pm:310
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
@@ -1179,23 +987,15 @@ msgstr "強制無 APIC"
 msgid "Force No Local APIC"
 msgstr "強制無本地端 APIC"
 
-#: any.pm:294
-#: any.pm:650
-#: authentication.pm:186
-#: diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:563
-#: printer/printerdrake.pm:1888
-#: printer/printerdrake.pm:2009
-#: standalone/drakbackup:1630
-#: standalone/drakbackup:3504
-#: standalone/drakups:299
+#: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
+#: network/netconnect.pm:563 printer/printerdrake.pm:1888
+#: printer/printerdrake.pm:2009 standalone/drakbackup:1630
+#: standalone/drakbackup:3504 standalone/drakups:299
 #, c-format
 msgid "Password"
 msgstr "密碼"
 
-#: any.pm:295
-#: any.pm:651
-#: authentication.pm:187
+#: any.pm:295 any.pm:651 authentication.pm:187
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
@@ -1255,21 +1055,17 @@ msgstr "預設的作業系統？"
 msgid "Image"
 msgstr "核心影像"
 
-#: any.pm:370
-#: any.pm:380
+#: any.pm:370 any.pm:380
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:371
-#: any.pm:393
+#: any.pm:371 any.pm:393
 #, c-format
 msgid "Append"
 msgstr "附加參數"
 
-#: any.pm:373
-#: standalone/drakboot:271
-#: standalone/drakboot:275
+#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
 #, c-format
 msgid "Video mode"
 msgstr "顯示模式"
@@ -1284,17 +1080,12 @@ msgstr "Initrd"
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:385
-#: any.pm:390
-#: any.pm:392
+#: any.pm:385 any.pm:390 any.pm:392
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:387
-#: any.pm:397
-#: harddrake/v4l.pm:368
-#: standalone/draksec:52
+#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52
 #, c-format
 msgid "Default"
 msgstr "預設"
@@ -1410,7 +1201,8 @@ msgstr "請輸入使用者名稱"
 
 #: any.pm:618
 #, c-format
-msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
 #: any.pm:619
@@ -1423,14 +1215,12 @@ msgstr "這個使用者名稱太長了"
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:621
-#: any.pm:653
+#: any.pm:621 any.pm:653
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:622
-#: any.pm:654
+#: any.pm:622 any.pm:654
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
@@ -1445,8 +1235,7 @@ msgstr "%s 必須是數字"
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:631
-#: standalone/draksambashare:1210
+#: any.pm:631 standalone/draksambashare:1210
 #, c-format
 msgid "Add user"
 msgstr "新增使用者"
@@ -1460,25 +1249,17 @@ msgstr ""
 "輸入一位使用者\n"
 "%s"
 
-#: any.pm:636
-#: diskdrake/dav.pm:66
-#: diskdrake/hd_gtk.pm:154
-#: diskdrake/removable.pm:26
-#: diskdrake/smbnfs_gtk.pm:81
-#: help.pm:530
-#: interactive/http.pm:151
-#: printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382
-#: printer/printerdrake.pm:5147
-#: standalone/drakbackup:2717
-#: standalone/scannerdrake:668
+#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
+#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
+#: interactive/http.pm:151 printer/printerdrake.pm:197
+#: printer/printerdrake.pm:382 printer/printerdrake.pm:5165
+#: standalone/drakbackup:2717 standalone/scannerdrake:668
 #: standalone/scannerdrake:818
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: any.pm:637
-#: help.pm:51
+#: any.pm:637 help.pm:51
 #, c-format
 msgid "Accept user"
 msgstr "接受使用者"
@@ -1488,8 +1269,7 @@ msgstr "接受使用者"
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:649
-#: standalone/drakbackup:1625
+#: any.pm:649 standalone/drakbackup:1625
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
@@ -1504,8 +1284,7 @@ msgstr "Shell"
 msgid "Icon"
 msgstr "圖示"
 
-#: any.pm:703
-#: security/l10n.pm:14
+#: any.pm:703 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
@@ -1530,14 +1309,12 @@ msgstr "選取預設的使用者："
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:719
-#: any.pm:787
+#: any.pm:719 any.pm:787
 #, c-format
 msgid "Please choose a language to use."
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:720
-#: any.pm:788
+#: any.pm:720 any.pm:788
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
@@ -1557,23 +1334,17 @@ msgstr ""
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:767
-#: any.pm:796
-#: help.pm:647
+#: any.pm:767 any.pm:796 help.pm:647
 #, c-format
 msgid "Use Unicode by default"
 msgstr "預設使用 Unicode"
 
-#: any.pm:768
-#: help.pm:647
+#: any.pm:768 help.pm:647
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:840
-#: help.pm:566
-#: help.pm:855
-#: install_steps_interactive.pm:951
+#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:951
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
@@ -1593,12 +1364,7 @@ msgstr "以下是全部可用的所有的國家清單"
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:845
-#: help.pm:51
-#: help.pm:409
-#: help.pm:431
-#: help.pm:647
-#: help.pm:722
+#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
 #: interactive.pm:397
 #, c-format
 msgid "Advanced"
@@ -1609,14 +1375,9 @@ msgstr "進階"
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:856
-#: install_any.pm:417
-#: network/netconnect.pm:301
-#: network/netconnect.pm:306
-#: network/netconnect.pm:1178
-#: network/wireless.pm:7
-#: printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2430
+#: any.pm:856 install_any.pm:417 network/netconnect.pm:301
+#: network/netconnect.pm:306 network/netconnect.pm:1179 network/wireless.pm:7
+#: printer/printerdrake.pm:105 printer/printerdrake.pm:2430
 #, c-format
 msgid "None"
 msgstr "無"
@@ -1635,7 +1396,8 @@ msgstr "允許所有使用者"
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
 "\"Custom\" permit a per-user granularity.\n"
 msgstr ""
@@ -1647,17 +1409,22 @@ msgstr ""
 
 #: any.pm:989
 #, c-format
-msgid "NFS: the traditional Unix file sharing system, with less support on Mac and Windows."
+msgid ""
+"NFS: the traditional Unix file sharing system, with less support on Mac and "
+"Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
 #: any.pm:992
 #, c-format
-msgid "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems."
+msgid ""
+"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
+"systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
 #: any.pm:1000
 #, c-format
-msgid "You can export using NFS or SMB. Please select which you would like to use."
+msgid ""
+"You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
 #: any.pm:1025
@@ -1665,18 +1432,11 @@ msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個�
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1025
-#: printer/printerdrake.pm:4191
-#: printer/printerdrake.pm:4194
-#: printer/printerdrake.pm:4195
-#: printer/printerdrake.pm:4196
-#: printer/printerdrake.pm:5459
-#: standalone/drakTermServ:294
-#: standalone/drakbackup:4097
-#: standalone/drakbug:126
-#: standalone/drakfont:498
-#: standalone/draknfs:210
-#: standalone/net_monitor:117
+#: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199
+#: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201
+#: printer/printerdrake.pm:5483 standalone/drakTermServ:294
+#: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498
+#: standalone/draknfs:210 standalone/net_monitor:117
 #: standalone/printerdrake:583
 #, c-format
 msgid "Close"
@@ -1711,8 +1471,7 @@ msgstr "NIS"
 msgid "Smart Card"
 msgstr "智慧卡"
 
-#: authentication.pm:27
-#: authentication.pm:152
+#: authentication.pm:27 authentication.pm:152
 #, c-format
 msgid "Windows Domain"
 msgstr "Windows 網域"
@@ -1734,7 +1493,8 @@ msgstr "本地端檔案："
 
 #: authentication.pm:55
 #, c-format
-msgid "Use local for all authentication and information user tell in local file"
+msgid ""
+"Use local for all authentication and information user tell in local file"
 msgstr ""
 
 #: authentication.pm:56
@@ -1744,7 +1504,9 @@ msgstr "LDAP："
 
 #: authentication.pm:56
 #, c-format
-msgid "Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization."
+msgid ""
+"Tells your computer to use LDAP for some or all authentication. LDAP "
+"consolidates certain types of information within your organization."
 msgstr ""
 
 #: authentication.pm:57
@@ -1754,7 +1516,9 @@ msgstr "NIS："
 
 #: authentication.pm:57
 #, c-format
-msgid "Allows you to run a group of computers in the same Network Information Service domain with a common password and group file."
+msgid ""
+"Allows you to run a group of computers in the same Network Information "
+"Service domain with a common password and group file."
 msgstr ""
 
 #: authentication.pm:58
@@ -1764,7 +1528,9 @@ msgstr "Windows 網域："
 
 #: authentication.pm:58
 #, c-format
-msgid "iWinbind allows the system to retrieve information and authenticate users in a Windows domain."
+msgid ""
+"iWinbind allows the system to retrieve information and authenticate users in "
+"a Windows domain."
 msgstr ""
 
 #: authentication.pm:59
@@ -1784,7 +1550,9 @@ msgstr ""
 
 #: authentication.pm:60
 #, c-format
-msgid "Winbind allows the system to authenticate users in a Windows Active Directory Server."
+msgid ""
+"Winbind allows the system to authenticate users in a Windows Active "
+"Directory Server."
 msgstr ""
 
 #: authentication.pm:85
@@ -1797,14 +1565,12 @@ msgstr "LDAP 認證"
 msgid "LDAP Base dn"
 msgstr ""
 
-#: authentication.pm:87
-#: share/compssUsers.pl:102
+#: authentication.pm:87 share/compssUsers.pl:102
 #, c-format
 msgid "LDAP Server"
 msgstr "LDAP 伺服器"
 
-#: authentication.pm:100
-#: fsedit.pm:23
+#: authentication.pm:100 fsedit.pm:23
 #, c-format
 msgid "simple"
 msgstr "簡單"
@@ -1824,24 +1590,18 @@ msgstr "SSL"
 msgid "security layout (SASL/Kerberos)"
 msgstr "安全性配置 (SASL/Kerberos)"
 
-#: authentication.pm:110
-#: authentication.pm:148
+#: authentication.pm:110 authentication.pm:148
 #, c-format
 msgid "Authentication Active Directory"
 msgstr "Active Directory 認證"
 
-#: authentication.pm:111
-#: authentication.pm:150
-#: diskdrake/smbnfs_gtk.pm:181
+#: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Domain"
 msgstr "網域"
 
-#: authentication.pm:113
-#: diskdrake/dav.pm:63
-#: help.pm:146
-#: printer/printerdrake.pm:141
-#: share/compssUsers.pl:82
+#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
+#: printer/printerdrake.pm:141 share/compssUsers.pl:82
 #: standalone/drakTermServ:269
 #, c-format
 msgid "Server"
@@ -1867,12 +1627,6 @@ msgstr ""
 msgid "Password for user"
 msgstr "使用者密碼"
 
-#: authentication.pm:118
-#: standalone/drakroam:46
-#, c-format
-msgid "Encryption"
-msgstr "加密"
-
 #: authentication.pm:129
 #, c-format
 msgid "Authentication NIS"
@@ -1891,15 +1645,27 @@ msgstr "NIS 伺服器"
 #: authentication.pm:136
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are good."
-msgstr ""
-"要能夠在 W2K PDC 下正常使用，您或許需要使用管理者權限在 Windows 主機那邊執行：C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add然後重新啟動伺服器。\n"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"要能夠在 W2K PDC 下正常使用，您或許需要使用管理者權限在 Windows 主機那邊執"
+"行：C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add"
+"然後重新啟動伺服器。\n"
 "您另外還需要網域管理者帳號密碼以便於能夠加入機器到 Windows(TM) 網域內。\n"
-"如果網路沒有被啟用，DrakX 程式會於網路設定步驟後企圖加入網域若是這樣設定失敗且網域認證莫名其妙不能作用的話，執行'smbpasswd -j DOMAIN -U USER%%PASSWORD' 指令，其中的 DOMAIN 為你的 Windows(tm) 網域名稱，USER 與 PASSWORD 為管理者的帳號與密碼。\n"
+"如果網路沒有被啟用，DrakX 程式會於網路設定步驟後企圖加入網域若是這樣設定失敗"
+"且網域認證莫名其妙不能作用的話，執行'smbpasswd -j DOMAIN -U USER%%PASSWORD' "
+"指令，其中的 DOMAIN 為你的 Windows(tm) 網域名稱，USER 與 PASSWORD 為管理者的"
+"帳號與密碼。\n"
 "最後使用 'wbinfo -t' 測試確認認證功能是否可以正常工作。"
 
 #: authentication.pm:148
@@ -1907,6 +1673,11 @@ msgstr ""
 msgid "Authentication Windows Domain"
 msgstr "Windows 網域認證"
 
+#: authentication.pm:150
+#, c-format
+msgid "Active Directory Realm "
+msgstr ""
+
 #: authentication.pm:153
 #, c-format
 msgid "Domain Admin User Name"
@@ -1927,15 +1698,13 @@ msgstr "設定管理者 (root) 密碼與網路認證方式"
 msgid "Set administrator (root) password"
 msgstr "設定管理者 (root) 密碼"
 
-#: authentication.pm:172
-#: standalone/drakvpn:1111
+#: authentication.pm:172 standalone/drakvpn:1111
 #, c-format
 msgid "Authentication method"
 msgstr "認證方式"
 
 #. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:177
-#: help.pm:722
+#: authentication.pm:177 help.pm:722
 #, c-format
 msgid "No password"
 msgstr "沒有密碼"
@@ -1945,12 +1714,8 @@ msgstr "沒有密碼"
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr "這個密碼太短了 (一定至少要有 %d 個字元才行)"
 
-#: authentication.pm:188
-#: network/netconnect.pm:306
-#: network/netconnect.pm:564
-#: standalone/drakauth:24
-#: standalone/drakauth:26
-#: standalone/drakconnect:481
+#: authentication.pm:188 network/netconnect.pm:306 network/netconnect.pm:564
+#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
 #, c-format
 msgid "Authentication"
 msgstr "認證方式"
@@ -2013,12 +1778,16 @@ msgstr "您無法把開機載入程式安裝在 %s 分割區上\n"
 
 #: bootloader.pm:1482
 #, c-format
-msgid "Your bootloader configuration must be updated because partition has been renumbered"
+msgid ""
+"Your bootloader configuration must be updated because partition has been "
+"renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
 #: bootloader.pm:1495
 #, c-format
-msgid "The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\""
+msgid ""
+"The bootloader can not be installed correctly. You have to boot rescue and "
+"choose \"%s\""
 msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
 
 #: bootloader.pm:1496
@@ -2071,300 +1840,189 @@ msgstr "kdesu 遺失"
 msgid "consolehelper missing"
 msgstr "consolehelper 遺失"
 
-#: crypto.pm:13
-#: crypto.pm:48
-#: lang.pm:207
-#: network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75
-#: network/adsl_consts.pm:84
+#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
+#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
 #, c-format
 msgid "Austria"
 msgstr "奧地利"
 
-#: crypto.pm:14
-#: crypto.pm:47
-#: lang.pm:208
-#: standalone/drakxtv:48
+#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
 #, c-format
 msgid "Australia"
 msgstr "澳洲"
 
-#: crypto.pm:15
-#: crypto.pm:49
-#: lang.pm:214
-#: network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102
-#: network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123
-#: network/netconnect.pm:44
+#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
+#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
+#: network/adsl_consts.pm:123 network/netconnect.pm:44
 #, c-format
 msgid "Belgium"
 msgstr "比利時"
 
-#: crypto.pm:16
-#: crypto.pm:50
-#: lang.pm:223
-#: network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143
-#: network/adsl_consts.pm:152
+#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
+#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
 #: network/adsl_consts.pm:161
 #, c-format
 msgid "Brazil"
 msgstr "巴西"
 
-#: crypto.pm:17
-#: crypto.pm:51
-#: lang.pm:230
+#: crypto.pm:17 crypto.pm:51 lang.pm:230
 #, c-format
 msgid "Canada"
 msgstr "加拿大"
 
-#: crypto.pm:18
-#: crypto.pm:74
-#: lang.pm:235
-#: network/adsl_consts.pm:891
-#: network/adsl_consts.pm:900
-#: network/adsl_consts.pm:911
+#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
+#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
 #, c-format
 msgid "Switzerland"
 msgstr "瑞士"
 
-#: crypto.pm:19
-#: lang.pm:242
+#: crypto.pm:19 lang.pm:242
 #, c-format
 msgid "Costa Rica"
 msgstr "哥斯大黎加"
 
-#: crypto.pm:20
-#: crypto.pm:52
-#: lang.pm:248
-#: network/adsl_consts.pm:368
+#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
 #, c-format
 msgid "Czech Republic"
 msgstr "捷克共和國"
 
-#: crypto.pm:21
-#: crypto.pm:57
-#: lang.pm:249
-#: network/adsl_consts.pm:499
+#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
 #: network/adsl_consts.pm:508
 #, c-format
 msgid "Germany"
 msgstr "德國"
 
-#: crypto.pm:22
-#: crypto.pm:53
-#: lang.pm:251
-#: network/adsl_consts.pm:378
+#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
 #, c-format
 msgid "Denmark"
 msgstr "丹麥"
 
-#: crypto.pm:23
-#: crypto.pm:54
-#: lang.pm:256
+#: crypto.pm:23 crypto.pm:54 lang.pm:256
 #, c-format
 msgid "Estonia"
 msgstr "愛沙尼亞"
 
-#: crypto.pm:24
-#: crypto.pm:72
-#: lang.pm:260
-#: network/adsl_consts.pm:759
-#: network/adsl_consts.pm:770
-#: network/adsl_consts.pm:781
-#: network/adsl_consts.pm:792
-#: network/adsl_consts.pm:801
-#: network/adsl_consts.pm:810
-#: network/adsl_consts.pm:819
-#: network/adsl_consts.pm:828
-#: network/adsl_consts.pm:837
-#: network/adsl_consts.pm:846
-#: network/adsl_consts.pm:855
-#: network/adsl_consts.pm:864
-#: network/adsl_consts.pm:873
+#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
+#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
+#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
+#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
+#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
+#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
+#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
 #, c-format
 msgid "Spain"
 msgstr "西班牙"
 
-#: crypto.pm:25
-#: crypto.pm:55
-#: lang.pm:262
-#: network/adsl_consts.pm:387
+#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
 #, c-format
 msgid "Finland"
 msgstr "芬蘭"
 
-#: crypto.pm:26
-#: crypto.pm:56
-#: lang.pm:267
-#: network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408
-#: network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431
-#: network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454
-#: network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477
-#: network/adsl_consts.pm:488
+#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
+#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
+#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
+#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
+#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
 #: network/netconnect.pm:41
 #, c-format
 msgid "France"
 msgstr "法國"
 
-#: crypto.pm:27
-#: crypto.pm:58
-#: lang.pm:280
-#: network/adsl_consts.pm:519
+#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
 #, c-format
 msgid "Greece"
 msgstr "希臘"
 
-#: crypto.pm:28
-#: crypto.pm:59
-#: lang.pm:291
-#: network/adsl_consts.pm:528
+#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
 #, c-format
 msgid "Hungary"
 msgstr "匈牙利"
 
-#: crypto.pm:29
-#: crypto.pm:60
-#: lang.pm:293
-#: network/adsl_consts.pm:537
+#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
 #: standalone/drakxtv:47
 #, c-format
 msgid "Ireland"
 msgstr "愛爾蘭"
 
-#: crypto.pm:30
-#: crypto.pm:61
-#: lang.pm:294
-#: network/adsl_consts.pm:546
+#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
 #, c-format
 msgid "Israel"
 msgstr "以色列"
 
-#: crypto.pm:31
-#: crypto.pm:62
-#: lang.pm:300
-#: network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569
-#: network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589
-#: network/netconnect.pm:43
-#: standalone/drakxtv:47
+#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
+#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
+#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
 #, c-format
 msgid "Italy"
 msgstr "義大利"
 
-#: crypto.pm:32
-#: crypto.pm:63
-#: lang.pm:303
+#: crypto.pm:32 crypto.pm:63 lang.pm:303
 #, c-format
 msgid "Japan"
 msgstr "日本"
 
-#: crypto.pm:33
-#: crypto.pm:64
-#: lang.pm:352
-#: network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629
-#: network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647
-#: network/netconnect.pm:42
+#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
+#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
+#: network/adsl_consts.pm:647 network/netconnect.pm:42
 #, c-format
 msgid "Netherlands"
 msgstr "荷蘭"
 
-#: crypto.pm:34
-#: crypto.pm:66
-#: lang.pm:353
-#: network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661
-#: network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671
-#: network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681
-#: network/adsl_consts.pm:686
+#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
+#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
+#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
+#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
 #, c-format
 msgid "Norway"
 msgstr "挪威"
 
-#: crypto.pm:35
-#: crypto.pm:65
-#: lang.pm:357
+#: crypto.pm:35 crypto.pm:65 lang.pm:357
 #, c-format
 msgid "New Zealand"
 msgstr "紐西蘭"
 
-#: crypto.pm:36
-#: crypto.pm:67
-#: lang.pm:365
-#: network/adsl_consts.pm:693
+#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
 #: network/adsl_consts.pm:704
 #, c-format
 msgid "Poland"
 msgstr "波蘭"
 
-#: crypto.pm:37
-#: crypto.pm:68
-#: lang.pm:370
-#: network/adsl_consts.pm:716
+#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
 #, c-format
 msgid "Portugal"
 msgstr "葡萄牙"
 
-#: crypto.pm:38
-#: crypto.pm:69
-#: lang.pm:376
-#: network/adsl_consts.pm:725
+#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
 #, c-format
 msgid "Russia"
 msgstr "蘇俄"
 
-#: crypto.pm:39
-#: crypto.pm:73
-#: lang.pm:382
-#: network/adsl_consts.pm:882
+#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
 #, c-format
 msgid "Sweden"
 msgstr "瑞典"
 
-#: crypto.pm:40
-#: crypto.pm:70
-#: lang.pm:387
+#: crypto.pm:40 crypto.pm:70 lang.pm:387
 #, c-format
 msgid "Slovakia"
 msgstr "斯洛伐克"
 
-#: crypto.pm:41
-#: crypto.pm:76
-#: lang.pm:401
-#: network/adsl_consts.pm:920
+#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
 #, c-format
 msgid "Thailand"
 msgstr "泰國"
 
-#: crypto.pm:42
-#: crypto.pm:75
-#: lang.pm:411
+#: crypto.pm:42 crypto.pm:75 lang.pm:411
 #, c-format
 msgid "Taiwan"
 msgstr "台灣"
 
-#: crypto.pm:43
-#: crypto.pm:71
-#: lang.pm:430
-#: standalone/drakxtv:49
+#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
 #, c-format
 msgid "South Africa"
 msgstr "南非"
 
-#: crypto.pm:77
-#: crypto.pm:107
-#: lang.pm:416
-#: network/netconnect.pm:45
+#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
 #, c-format
 msgid "United States"
 msgstr "美國"
@@ -2386,26 +2044,19 @@ msgstr ""
 msgid "New"
 msgstr "新增"
 
-#: diskdrake/dav.pm:61
-#: diskdrake/interactive.pm:454
-#: diskdrake/smbnfs_gtk.pm:74
+#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
 #, c-format
 msgid "Unmount"
 msgstr "卸載"
 
-#: diskdrake/dav.pm:62
-#: diskdrake/interactive.pm:451
-#: diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Mount"
 msgstr "掛載"
 
-#: diskdrake/dav.pm:64
-#: diskdrake/interactive.pm:446
-#: diskdrake/interactive.pm:670
-#: diskdrake/interactive.pm:689
-#: diskdrake/removable.pm:23
-#: diskdrake/smbnfs_gtk.pm:78
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
+#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
+#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
@@ -2425,16 +2076,13 @@ msgstr "URL 格式必須為 http:// 或是 https://"
 msgid "Server: "
 msgstr "伺服器："
 
-#: diskdrake/dav.pm:110
-#: diskdrake/interactive.pm:521
-#: diskdrake/interactive.pm:1208
-#: diskdrake/interactive.pm:1286
+#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
+#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:111
-#: diskdrake/interactive.pm:1293
+#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
@@ -2447,12 +2095,14 @@ msgstr "請您先備份您的資料"
 #: diskdrake/hd_gtk.pm:95
 #, c-format
 msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)\n"
+"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
+"enough)\n"
 "at the beginning of the disk"
-msgstr "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空間 (2048 扇區就足夠了)"
+msgstr ""
+"如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空"
+"間 (2048 扇區就足夠了)"
 
-#: diskdrake/hd_gtk.pm:152
-#: help.pm:530
+#: diskdrake/hd_gtk.pm:152 help.pm:530
 #, c-format
 msgid "Wizard"
 msgstr "精靈"
@@ -2478,11 +2128,8 @@ msgstr ""
 msgid "Please click on a partition"
 msgstr "請點選一個分割區"
 
-#: diskdrake/hd_gtk.pm:205
-#: diskdrake/smbnfs_gtk.pm:62
-#: install_steps_gtk.pm:460
-#: standalone/drakbackup:2952
-#: standalone/drakbackup:3012
+#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:460
+#: standalone/drakbackup:2952 standalone/drakbackup:3012
 #, c-format
 msgid "Details"
 msgstr "詳細資訊"
@@ -2522,8 +2169,7 @@ msgstr "HFS"
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:336
-#: diskdrake/interactive.pm:1223
+#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
 #, c-format
 msgid "Empty"
 msgstr "空白"
@@ -2533,36 +2179,27 @@ msgstr "空白"
 msgid "Filesystem types:"
 msgstr "檔案系統格式："
 
-#: diskdrake/hd_gtk.pm:357
-#: diskdrake/hd_gtk.pm:359
-#: diskdrake/hd_gtk.pm:365
+#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
 #, c-format
 msgid "Use ``%s'' instead"
 msgstr "用 ``%s'' 代替"
 
-#: diskdrake/hd_gtk.pm:357
-#: diskdrake/interactive.pm:470
+#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
 #, c-format
 msgid "Create"
 msgstr "建立"
 
-#: diskdrake/hd_gtk.pm:357
-#: diskdrake/hd_gtk.pm:365
-#: diskdrake/interactive.pm:447
-#: diskdrake/interactive.pm:623
-#: diskdrake/removable.pm:25
-#: diskdrake/removable.pm:48
-#: standalone/harddrake2:108
-#: standalone/harddrake2:117
+#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
+#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
+#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
+#: standalone/harddrake2:108 standalone/harddrake2:117
 #, c-format
 msgid "Type"
 msgstr "格式"
 
 #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:359
-#: diskdrake/interactive.pm:455
-#: standalone/drakperm:123
-#: standalone/printerdrake:248
+#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
+#: standalone/drakperm:123 standalone/printerdrake:248
 #, c-format
 msgid "Delete"
 msgstr "刪除"
@@ -2587,8 +2224,7 @@ msgstr "選擇一個分割區"
 msgid "Exit"
 msgstr "離開"
 
-#: diskdrake/interactive.pm:256
-#: help.pm:530
+#: diskdrake/interactive.pm:256 help.pm:530
 #, c-format
 msgid "Undo"
 msgstr "復原"
@@ -2623,8 +2259,7 @@ msgstr "放棄寫入硬碟分割表就離開？"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"
 
-#: diskdrake/interactive.pm:292
-#: install_steps_interactive.pm:340
+#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "您必須重新開機以使更動過的硬碟分割表生效"
@@ -2640,24 +2275,18 @@ msgstr ""
 "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
 "仍然要離開嗎？"
 
-#: diskdrake/interactive.pm:310
-#: help.pm:530
+#: diskdrake/interactive.pm:310 help.pm:530
 #, c-format
 msgid "Clear all"
 msgstr "全部清除"
 
-#: diskdrake/interactive.pm:311
-#: help.pm:530
+#: diskdrake/interactive.pm:311 help.pm:530
 #, c-format
 msgid "Auto allocate"
 msgstr "自動分配"
 
-#: diskdrake/interactive.pm:312
-#: help.pm:530
-#: help.pm:566
-#: help.pm:606
-#: help.pm:855
-#: install_steps_interactive.pm:123
+#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
+#: help.pm:855 install_steps_interactive.pm:123
 #, c-format
 msgid "More"
 msgstr "更多"
@@ -2679,7 +2308,9 @@ msgstr "我無法再新增任何分割區了"
 
 #: diskdrake/interactive.pm:351
 #, c-format
-msgid "To have more partitions, please delete one to be able to create an extended partition"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區"
 
 #: diskdrake/interactive.pm:360
@@ -2697,26 +2328,22 @@ msgstr "Supermount"
 msgid "Supermount except for CDROM drives"
 msgstr "在光碟機以外的裝置使用 supermount"
 
-#: diskdrake/interactive.pm:368
-#: help.pm:530
+#: diskdrake/interactive.pm:368 help.pm:530
 #, c-format
 msgid "Save partition table"
 msgstr "寫入硬碟分割表"
 
-#: diskdrake/interactive.pm:369
-#: help.pm:530
+#: diskdrake/interactive.pm:369 help.pm:530
 #, c-format
 msgid "Restore partition table"
 msgstr "回存硬碟分割表"
 
-#: diskdrake/interactive.pm:370
-#: help.pm:530
+#: diskdrake/interactive.pm:370 help.pm:530
 #, c-format
 msgid "Rescue partition table"
 msgstr "搶救硬碟分割表"
 
-#: diskdrake/interactive.pm:372
-#: help.pm:530
+#: diskdrake/interactive.pm:372 help.pm:530
 #, c-format
 msgid "Reload partition table"
 msgstr "重新載入硬碟分割表"
@@ -2726,8 +2353,7 @@ msgstr "重新載入硬碟分割表"
 msgid "Removable media automounting"
 msgstr "自動掛載可移除式裝置"
 
-#: diskdrake/interactive.pm:387
-#: diskdrake/interactive.pm:413
+#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
 #, c-format
 msgid "Select file"
 msgstr "選擇檔案"
@@ -2751,8 +2377,7 @@ msgstr "正在試圖救回硬碟分割表"
 msgid "Detailed information"
 msgstr "詳細資訊"
 
-#: diskdrake/interactive.pm:449
-#: diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
@@ -2802,14 +2427,12 @@ msgstr "建立新的分割區"
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:929
+#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:520
-#: diskdrake/interactive.pm:930
+#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
@@ -2842,7 +2465,8 @@ msgstr "移除 loopback 檔案？"
 
 #: diskdrake/interactive.pm:607
 #, c-format
-msgid "After changing type of partition %s, all data on this partition will be lost"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
 #: diskdrake/interactive.pm:619
@@ -2850,8 +2474,7 @@ msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資�
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:620
-#: diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
@@ -2885,10 +2508,8 @@ msgstr ""
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:712
-#: diskdrake/interactive.pm:791
-#: install_interactive.pm:156
-#: install_interactive.pm:188
+#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
+#: install_interactive.pm:156 install_interactive.pm:188
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
@@ -2923,8 +2544,7 @@ msgstr "選取新的大小"
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:802
-#: install_interactive.pm:196
+#: diskdrake/interactive.pm:802 install_interactive.pm:196
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s), \n"
@@ -2938,8 +2558,7 @@ msgstr ""
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:845
-#: diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
 #, c-format
 msgid "new"
 msgstr "新增"
@@ -3051,8 +2670,7 @@ msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分�
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1154
-#: standalone/draksambashare:75
+#: diskdrake/interactive.pm:1154 standalone/draksambashare:75
 #: standalone/draksambashare:138
 #, c-format
 msgid "Hide files"
@@ -3092,8 +2710,7 @@ msgstr "分割區 %s 現在被命名為 %s 了"
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1209
-#: diskdrake/interactive.pm:1271
+#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
 #, c-format
 msgid "Device: "
 msgstr "裝置："
@@ -3113,15 +2730,13 @@ msgstr "磁區標籤："
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1216
-#: diskdrake/interactive.pm:1225
+#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
 #: diskdrake/interactive.pm:1289
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1220
-#: install_steps_gtk.pm:300
+#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
 #, c-format
 msgid "Name: "
 msgstr "名稱："
@@ -3289,10 +2904,8 @@ msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:1329
-#: network/netconnect.pm:1016
-#: standalone/drakconnect:419
-#: standalone/drakroam:112
+#: diskdrake/interactive.pm:1329 network/netconnect.pm:1016
+#: standalone/drakconnect:419 standalone/drakroam:112
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
@@ -3302,8 +2915,7 @@ msgstr "加密金鑰"
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:1332
-#: standalone/drakvpn:1017
+#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
 #: standalone/drakvpn:1102
 #, c-format
 msgid "Encryption algorithm"
@@ -3319,8 +2931,7 @@ msgstr "改變分割區格式"
 msgid "Can not login using username %s (bad password?)"
 msgstr "無法使用 %s 使用者名稱登入系統 (密碼錯誤?)"
 
-#: diskdrake/smbnfs_gtk.pm:167
-#: diskdrake/smbnfs_gtk.pm:176
+#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
 #, c-format
 msgid "Domain Authentication Required"
 msgstr "需要 Domain 認證"
@@ -3337,11 +2948,11 @@ msgstr "另外一個"
 
 #: diskdrake/smbnfs_gtk.pm:177
 #, c-format
-msgid "Please enter your username, password and domain name to access this host."
+msgid ""
+"Please enter your username, password and domain name to access this host."
 msgstr "請輸入你的使用者名稱，密碼以及網域名稱，以便於能夠連線存取這個主機。"
 
-#: diskdrake/smbnfs_gtk.pm:179
-#: standalone/drakbackup:3503
+#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3503
 #, c-format
 msgid "Username"
 msgstr "使用者名稱"
@@ -3356,37 +2967,55 @@ msgstr "搜尋伺服器"
 msgid "Search new servers"
 msgstr "搜尋新的伺服器"
 
-#: do_pkgs.pm:16
-#: do_pkgs.pm:34
+#: do_pkgs.pm:16 do_pkgs.pm:49
 #, c-format
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr "需要安裝 %s 這個套件，您要安裝它嗎？"
 
-#: do_pkgs.pm:19
-#: do_pkgs.pm:37
-#: printer/printerdrake.pm:4032
+#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:4037
 #, c-format
 msgid "Could not install the %s package!"
 msgstr "無法安裝 %s 套件！"
 
-#: do_pkgs.pm:24
-#: do_pkgs.pm:42
+#: do_pkgs.pm:24 do_pkgs.pm:57
 #, c-format
 msgid "Mandatory package %s is missing"
 msgstr "必要的 %s 套件遺失"
 
-#: do_pkgs.pm:187
+#: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1307
+#: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:455
+#: printer/printerdrake.pm:1429 printer/printerdrake.pm:2461
+#: printer/printerdrake.pm:2561 printer/printerdrake.pm:2607
+#: printer/printerdrake.pm:2674 printer/printerdrake.pm:2709
+#: printer/printerdrake.pm:3043 printer/printerdrake.pm:3050
+#: printer/printerdrake.pm:4036 printer/printerdrake.pm:4365
+#: printer/printerdrake.pm:4485 printer/printerdrake.pm:5644
+#: standalone/drakTermServ:326 standalone/drakTermServ:1205
+#: standalone/drakTermServ:1266 standalone/drakTermServ:1931
+#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133
+#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakups:27
+#: standalone/harddrake2:479 standalone/localedrake:43
+#: standalone/scannerdrake:51 standalone/scannerdrake:940
+#, c-format
+msgid "Warning"
+msgstr "警告"
+
+#: do_pkgs.pm:35 standalone/drakbackup:4109 standalone/harddrake2:479
+#, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "需要安裝下列套件：\n"
+
+#: do_pkgs.pm:202
 #, c-format
 msgid "Installing packages..."
 msgstr "正在安裝套件..."
 
-#: do_pkgs.pm:232
+#: do_pkgs.pm:247
 #, c-format
 msgid "Removing packages..."
 msgstr "正在移除套件..."
 
-#: fs/format.pm:58
-#: fs/format.pm:65
+#: fs/format.pm:58 fs/format.pm:65
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
@@ -3401,8 +3030,7 @@ msgstr "建立並格式化檔案 %s"
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道要如何將 %s 格式化為 %s 格式"
 
-#: fs/format.pm:120
-#: fs/format.pm:122
+#: fs/format.pm:120 fs/format.pm:122
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "以 %s 格式化 %s 失敗"
@@ -3422,14 +3050,12 @@ msgstr "正在掛載分割區 %s"
 msgid "mounting partition %s in directory %s failed"
 msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗"
 
-#: fs/mount.pm:80
-#: fs/mount.pm:97
+#: fs/mount.pm:80 fs/mount.pm:97
 #, c-format
 msgid "Checking %s"
 msgstr "檢查 %s"
 
-#: fs/mount.pm:113
-#: partition_table.pm:385
+#: fs/mount.pm:113 partition_table.pm:385
 #, c-format
 msgid "error unmounting %s: %s"
 msgstr "卸下 %s 的掛載時發生錯誤：%s"
@@ -3500,7 +3126,8 @@ msgstr "所有對於此檔案系統的存取 (I/O) 動作必須同步。"
 #, c-format
 msgid ""
 "Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the file\n"
+"name of the mounting user is written to mtab so that he can unmount the "
+"file\n"
 "system again. This option implies the options noexec, nosuid, and nodev\n"
 "(unless overridden by subsequent options, as in the option line\n"
 "user,exec,dev,suid )."
@@ -3548,7 +3175,8 @@ msgstr "伺服器"
 #: fsedit.pm:210
 #, c-format
 msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :(\n"
+"I can not read the partition table of device %s, it's too corrupted for me :"
+"(\n"
 "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
 "The other solution is to not allow DrakX to modify the partition table.\n"
 "(the error is %s)\n"
@@ -3590,28 +3218,32 @@ msgstr ""
 
 #: fsedit.pm:387
 #, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s since it spans physical volumes"
+msgid ""
+"You can not use a LVM Logical Volume for mount point %s since it spans "
+"physical volumes"
 msgstr ""
 
 #: fsedit.pm:389
 #, c-format
 msgid ""
 "You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this when the volume spans physical volumes.\n"
+"The bootloader is not able to handle this when the volume spans physical "
+"volumes.\n"
 "You should create a /boot partition first"
 msgstr ""
 
-#: fsedit.pm:393
-#: fsedit.pm:395
+#: fsedit.pm:393 fsedit.pm:395
 #, c-format
 msgid "This directory should remain within the root filesystem"
 msgstr "這個目錄應該放在根檔案系統 (/) 才對"
 
-#: fsedit.pm:397
-#: fsedit.pm:399
+#: fsedit.pm:397 fsedit.pm:399
 #, c-format
-msgid "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n"
-msgstr "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
 
 #: fsedit.pm:401
 #, c-format
@@ -3628,8 +3260,7 @@ msgstr "沒有足夠的空間來進行自動配置"
 msgid "Nothing to do"
 msgstr "沒有做任何動作"
 
-#: harddrake/data.pm:62
-#: install_any.pm:1689
+#: harddrake/data.pm:62 install_any.pm:1689
 #, c-format
 msgid "Floppy"
 msgstr "軟碟機"
@@ -3639,14 +3270,12 @@ msgstr "軟碟機"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88
-#: install_any.pm:1690
+#: harddrake/data.pm:88 install_any.pm:1690
 #, c-format
 msgid "Hard Disk"
 msgstr "硬碟"
 
-#: harddrake/data.pm:97
-#: install_any.pm:1691
+#: harddrake/data.pm:97 install_any.pm:1691
 #, c-format
 msgid "CDROM"
 msgstr "光碟機"
@@ -3661,8 +3290,7 @@ msgstr "CD/DVD 燒錄器"
 msgid "DVD-ROM"
 msgstr "DVD-ROM"
 
-#: harddrake/data.pm:127
-#: standalone/drakbackup:2050
+#: harddrake/data.pm:127 standalone/drakbackup:2050
 #, c-format
 msgid "Tape"
 msgstr "磁帶"
@@ -3737,8 +3365,7 @@ msgstr "藍芽裝置"
 msgid "Ethernetcard"
 msgstr "乙太網路介面卡"
 
-#: harddrake/data.pm:282
-#: network/netconnect.pm:476
+#: harddrake/data.pm:282 network/netconnect.pm:476
 #, c-format
 msgid "Modem"
 msgstr "數據機"
@@ -3758,9 +3385,7 @@ msgstr "記憶體"
 msgid "AGP controllers"
 msgstr "AGP 控制器"
 
-#: harddrake/data.pm:324
-#: help.pm:186
-#: help.pm:855
+#: harddrake/data.pm:324 help.pm:186 help.pm:855
 #: install_steps_interactive.pm:983
 #, c-format
 msgid "Printer"
@@ -3827,11 +3452,8 @@ msgstr "SMBus 控制器"
 msgid "Bridges and system controllers"
 msgstr "橋樑與系統控制器"
 
-#: harddrake/data.pm:447
-#: help.pm:855
-#: install_steps_interactive.pm:119
-#: install_steps_interactive.pm:943
-#: standalone/keyboarddrake:29
+#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119
+#: install_steps_interactive.pm:943 standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "鍵盤"
@@ -3841,9 +3463,7 @@ msgstr "鍵盤"
 msgid "Tablet and touchscreen"
 msgstr "Tablet 與觸控螢幕"
 
-#: harddrake/data.pm:469
-#: help.pm:855
-#: install_steps_interactive.pm:976
+#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:976
 #, c-format
 msgid "Mouse"
 msgstr "滑鼠"
@@ -3858,8 +3478,7 @@ msgstr "UPS"
 msgid "Scanner"
 msgstr "掃描器"
 
-#: harddrake/data.pm:502
-#: standalone/harddrake2:442
+#: harddrake/data.pm:502 standalone/harddrake2:442
 #, c-format
 msgid "Unknown/Others"
 msgstr "未知/其他"
@@ -3869,8 +3488,7 @@ msgstr "未知/其他"
 msgid "cpu # "
 msgstr "CPU 編號"
 
-#: harddrake/sound.pm:192
-#: standalone/drakconnect:162
+#: harddrake/sound.pm:192 standalone/drakconnect:162
 #: standalone/drakconnect:637
 #, c-format
 msgid "Please Wait... Applying the configuration"
@@ -3883,7 +3501,9 @@ msgstr "無另外可供選擇的驅動程式"
 
 #: harddrake/sound.pm:229
 #, c-format
-msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
 msgstr ""
 "目前沒有另外可供選擇的 OSS/ALSA 驅動程式支援你的音效卡 (%s)\n"
 "正在使用 \"%s\""
@@ -3895,10 +3515,12 @@ msgstr "音效設定"
 
 #: harddrake/sound.pm:237
 #, c-format
-msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您的音效卡 (%s)"
 
-#. -PO: here the first %s is either "OSS" or "ALSA",
+#. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
 #: harddrake/sound.pm:242
@@ -3906,7 +3528,8 @@ msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您�
 msgid ""
 "\n"
 "\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
 msgstr ""
 "\n"
 "\n"
@@ -3915,19 +3538,24 @@ msgstr ""
 #: harddrake/sound.pm:244
 #, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n"
+"OSS (Open Sound System) was the first sound API. It's an OS independent "
+"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
+"and limited API.\n"
 "What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
 "supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
 "It also provides a much higher API than OSS.\n"
 "\n"
 "To use alsa, one can either use:\n"
 "- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
 msgstr ""
-"OSS (Open Sound System) 是最早的音效 API。它是一套不依賴於作業系統的音效 API (可用於大多數的 UNIX(tm) 系統)，但它的功能非常基本且有限。\n"
+"OSS (Open Sound System) 是最早的音效 API。它是一套不依賴於作業系統的音效 API "
+"(可用於大多數的 UNIX(tm) 系統)，但它的功能非常基本且有限。\n"
 "甚至，OSS 的驅動程式還重新開發已有的功能。\n"
 "\n"
 "ALSA (Advanced Linux Sound Architecture) 是一個模組化的架構並且\n"
@@ -3939,9 +3567,7 @@ msgstr ""
 "- 相容於 OSS 的舊 API\n"
 "- 提供許多強化的功能但需要使用 ALSA 函式庫的新 ALSA API。\n"
 
-#: harddrake/sound.pm:258
-#: harddrake/sound.pm:343
-#: standalone/drakups:146
+#: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146
 #, c-format
 msgid "Driver:"
 msgstr "驅動程式："
@@ -3952,41 +3578,6 @@ msgid "Trouble shooting"
 msgstr "疑難排解"
 
 #: harddrake/sound.pm:271
-#: install_steps_interactive.pm:1305
-#: keyboard.pm:391
-#: network/ndiswrapper.pm:95
-#: network/netconnect.pm:455
-#: printer/printerdrake.pm:1429
-#: printer/printerdrake.pm:2461
-#: printer/printerdrake.pm:2561
-#: printer/printerdrake.pm:2607
-#: printer/printerdrake.pm:2674
-#: printer/printerdrake.pm:2709
-#: printer/printerdrake.pm:3038
-#: printer/printerdrake.pm:3045
-#: printer/printerdrake.pm:4031
-#: printer/printerdrake.pm:4360
-#: printer/printerdrake.pm:4480
-#: printer/printerdrake.pm:5620
-#: standalone/drakTermServ:326
-#: standalone/drakTermServ:1205
-#: standalone/drakTermServ:1266
-#: standalone/drakTermServ:1931
-#: standalone/drakbackup:497
-#: standalone/drakbackup:596
-#: standalone/drakboot:133
-#: standalone/drakclock:224
-#: standalone/drakconnect:973
-#: standalone/drakups:27
-#: standalone/harddrake2:479
-#: standalone/localedrake:43
-#: standalone/scannerdrake:51
-#: standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "警告"
-
-#: harddrake/sound.pm:271
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -4008,7 +3599,9 @@ msgstr "無開放原始碼的驅動程式可用"
 
 #: harddrake/sound.pm:280
 #, c-format
-msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
 msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"."
 
 #: harddrake/sound.pm:283
@@ -4090,7 +3683,8 @@ msgstr "正在選擇任意的驅動程式"
 #: harddrake/sound.pm:338
 #, c-format
 msgid ""
-"If you really think that you know which driver is the right one for your card\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
 "you can pick one in the above list.\n"
 "\n"
 "The current driver for your \"%s\" sound card is \"%s\" "
@@ -4100,17 +3694,13 @@ msgstr ""
 "\n"
 "目前您的音效卡 \"%s\" 使用的驅動程式是 \"%s\"。"
 
-#: harddrake/v4l.pm:12
-#: standalone/net_applet:64
-#: standalone/net_applet:65
+#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
 #: standalone/net_applet:67
 #, c-format
 msgid "Auto-detect"
 msgstr "自動偵測"
 
-#: harddrake/v4l.pm:85
-#: harddrake/v4l.pm:263
-#: harddrake/v4l.pm:296
+#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
 #, c-format
 msgid "Unknown|Generic"
 msgstr "未知|一般"
@@ -4128,11 +3718,15 @@ msgstr "未知|CPH06X (bt878) [許多廠商]"
 #: harddrake/v4l.pm:404
 #, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"對於目前大部分的電視卡，GNU/Linux 核心的 bttv 模組都能夠正確的偵測正確的參數。\n"
-"若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型號。若需要的話請直接選擇您的電視卡卡參數。"
+"對於目前大部分的電視卡，GNU/Linux 核心的 bttv 模組都能夠正確的偵測正確的參"
+"數。\n"
+"若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型"
+"號。若需要的話請直接選擇您的電視卡卡參數。"
 
 #: harddrake/v4l.pm:407
 #, c-format
@@ -4181,11 +3775,8 @@ msgstr ""
 "這包含整個 Mandriva Linux 發行版的版權內容。若是您同意裡面的所有條款，\n"
 "請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。"
 
-#: help.pm:14
-#: install_steps_gtk.pm:542
-#: install_steps_interactive.pm:92
-#: install_steps_interactive.pm:734
-#: standalone/drakautoinst:214
+#: help.pm:14 install_steps_gtk.pm:542 install_steps_interactive.pm:92
+#: install_steps_interactive.pm:734 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
@@ -4195,7 +3786,8 @@ msgstr "接受"
 msgid ""
 "GNU/Linux is a multi-user system which means each user can have his or her\n"
 "own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be authorized\n"
+"system administrator, the users you add at this point will not be "
+"authorized\n"
 "to change anything except their own files and their own configurations,\n"
 "protecting the system from unintentional or malicious changes which could\n"
 "impact on the system as a whole. You'll have to create at least one regular\n"
@@ -4257,29 +3849,18 @@ msgstr ""
 "選擇想要登入的使用者與視窗管理員，然後勾選 \"%s\"。若您對這個功\n"
 "能沒有興趣，請不要勾選 \"%s\"。"
 
-#: help.pm:51
-#: printer/printerdrake.pm:1887
-#: printer/printerdrake.pm:2008
+#: help.pm:51 printer/printerdrake.pm:1887 printer/printerdrake.pm:2008
 #: standalone/draksambashare:54
 #, c-format
 msgid "User name"
 msgstr "使用者名稱"
 
-#: help.pm:51
-#: help.pm:431
-#: help.pm:681
-#: install_steps_gtk.pm:237
-#: install_steps_gtk.pm:685
-#: interactive.pm:436
-#: interactive/newt.pm:321
-#: network/thirdparty.pm:322
-#: printer/printerdrake.pm:3968
-#: standalone/drakTermServ:384
-#: standalone/drakbackup:3954
-#: standalone/drakbackup:4048
-#: standalone/drakbackup:4065
-#: standalone/drakbackup:4083
-#: ugtk2.pm:510
+#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
+#: install_steps_gtk.pm:685 interactive.pm:436 interactive/newt.pm:321
+#: network/thirdparty.pm:347 printer/printerdrake.pm:3973
+#: standalone/drakTermServ:384 standalone/drakbackup:3954
+#: standalone/drakbackup:4048 standalone/drakbackup:4065
+#: standalone/drakbackup:4083 ugtk2.pm:510
 #, c-format
 msgid "Next"
 msgstr "下一步"
@@ -4365,7 +3946,8 @@ msgstr ""
 #, c-format
 msgid ""
 "It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make it\n"
+"There are thousands of packages available for Mandriva Linux, and to make "
+"it\n"
 "simpler to manage, they have been placed into groups of similar\n"
 "applications.\n"
 "\n"
@@ -4462,41 +4044,33 @@ msgstr ""
 " * \"%s\"：將安裝絕對最少套件必要於使一個 Linux 系統工作。\n"
 "用這個安裝您將只擁有一個命令列介面. 全部安裝大小大約 65 MB。"
 
-#: help.pm:146
-#: share/compssUsers.pl:24
+#: help.pm:146 share/compssUsers.pl:24
 #, c-format
 msgid "Workstation"
 msgstr "工作站"
 
-#: help.pm:146
-#: share/compssUsers.pl:65
-#: share/compssUsers.pl:167
+#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
 #: share/compssUsers.pl:169
 #, c-format
 msgid "Development"
 msgstr "程式開發"
 
-#: help.pm:146
-#: share/compssUsers.pl:145
+#: help.pm:146 share/compssUsers.pl:145
 #, c-format
 msgid "Graphical Environment"
 msgstr "圖形環境"
 
-#: help.pm:146
-#: install_steps_gtk.pm:235
-#: install_steps_interactive.pm:642
+#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:642
 #, c-format
 msgid "Individual package selection"
 msgstr "選取單一套件"
 
-#: help.pm:146
-#: help.pm:588
+#: help.pm:146 help.pm:588
 #, c-format
 msgid "Upgrade"
 msgstr "升級"
 
-#: help.pm:146
-#: install_steps_interactive.pm:600
+#: help.pm:146 install_steps_interactive.pm:600
 #, c-format
 msgid "With X"
 msgstr "包含 X 環境"
@@ -4529,7 +4103,8 @@ msgid ""
 "services at boot time. Even if they are safe and have no known issues at\n"
 "the time the distribution was shipped, it is entirely possible that\n"
 "security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do or\n"
+"finalized. If you do not know what a particular service is supposed to do "
+"or\n"
 "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
 "the listed services and they will be started automatically at boot time. !!\n"
 "\n"
@@ -4548,35 +4123,17 @@ msgid ""
 "such a floppy."
 msgstr ""
 
-#: help.pm:180
-#: help.pm:285
-#: help.pm:313
-#: help.pm:444
-#: install_any.pm:925
-#: interactive.pm:161
-#: modules/interactive.pm:71
-#: standalone/drakbackup:2517
-#: standalone/draksec:54
-#: standalone/harddrake2:309
-#: ugtk2.pm:918
-#: wizards.pm:156
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:925
+#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2517
+#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:918 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: help.pm:180
-#: help.pm:285
-#: help.pm:444
-#: install_any.pm:925
-#: interactive.pm:161
-#: modules/interactive.pm:71
-#: printer/printerdrake.pm:883
-#: printer/printerdrake.pm:898
-#: standalone/drakbackup:2517
-#: standalone/draksec:55
-#: standalone/harddrake2:308
-#: ugtk2.pm:918
-#: wizards.pm:156
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:925 interactive.pm:161
+#: modules/interactive.pm:71 printer/printerdrake.pm:883
+#: printer/printerdrake.pm:898 standalone/drakbackup:2517
+#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:918 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是的"
@@ -4595,14 +4152,9 @@ msgid ""
 "manual is similar to the one used during installation."
 msgstr ""
 
-#: help.pm:186
-#: help.pm:566
-#: help.pm:855
-#: install_steps_gtk.pm:598
-#: standalone/drakbackup:2341
-#: standalone/drakbackup:2345
-#: standalone/drakbackup:2349
-#: standalone/drakbackup:2353
+#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:598
+#: standalone/drakbackup:2341 standalone/drakbackup:2345
+#: standalone/drakbackup:2349 standalone/drakbackup:2353
 #: standalone/drakroam:165
 #, c-format
 msgid "Configure"
@@ -4623,7 +4175,8 @@ msgid ""
 "it is safer to leave the default behavior.\n"
 "\n"
 "!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not need.\n"
+"server: you probably do not want to start any services which you do not "
+"need.\n"
 "Please remember that some services can be dangerous if they're enabled on a\n"
 "server. In general, select only those services you really need. !!"
 msgstr ""
@@ -4656,8 +4209,7 @@ msgid ""
 "server which can be used by other machines on your local network as well."
 msgstr ""
 
-#: help.pm:217
-#: install_steps_interactive.pm:878
+#: help.pm:217 install_steps_interactive.pm:878
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "硬體時鐘設定為 GMT 時間"
@@ -4847,8 +4399,10 @@ msgid ""
 "to store your data or to install new software.\n"
 "\n"
 " * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, choose\n"
-"this option. Be careful, because you will not be able to undo this operation\n"
+"your hard drive and replace them with your new Mandriva Linux system, "
+"choose\n"
+"this option. Be careful, because you will not be able to undo this "
+"operation\n"
 "after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
@@ -4925,8 +4479,7 @@ msgstr ""
 "``Starter Guide (初學者指導)''的\n"
 "``Managing Your Partitions (管理您的分割)'' 部份."
 
-#: help.pm:374
-#: install_interactive.pm:95
+#: help.pm:374 install_interactive.pm:95
 #, c-format
 msgid "Use free space"
 msgstr "使用未用到的空間"
@@ -4936,14 +4489,12 @@ msgstr "使用未用到的空間"
 msgid "Use existing partition"
 msgstr "使用已經存在的分割區"
 
-#: help.pm:374
-#: install_interactive.pm:137
+#: help.pm:374 install_interactive.pm:137
 #, c-format
 msgid "Use the free space on the Windows partition"
 msgstr "使用 Windows 分割區所剩餘的可用空間"
 
-#: help.pm:374
-#: install_interactive.pm:213
+#: help.pm:374 install_interactive.pm:213
 #, c-format
 msgid "Erase entire disk"
 msgstr "刪除所有磁碟內容"
@@ -4953,8 +4504,7 @@ msgstr "刪除所有磁碟內容"
 msgid "Remove Windows"
 msgstr "移除 Windows"
 
-#: help.pm:374
-#: install_interactive.pm:228
+#: help.pm:374 install_interactive.pm:228
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自訂磁碟分割"
@@ -5026,20 +4576,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "產生自動安裝軟片"
 
-#: help.pm:409
-#: install_steps_interactive.pm:1331
+#: help.pm:409 install_steps_interactive.pm:1333
 #, c-format
 msgid "Replay"
 msgstr "重播"
 
-#: help.pm:409
-#: install_steps_interactive.pm:1331
+#: help.pm:409 install_steps_interactive.pm:1333
 #, c-format
 msgid "Automated"
 msgstr "自動化"
 
-#: help.pm:409
-#: install_steps_interactive.pm:1334
+#: help.pm:409 install_steps_interactive.pm:1336
 #, c-format
 msgid "Save packages selection"
 msgstr "儲存套件選擇"
@@ -5053,7 +4600,8 @@ msgid ""
 "\n"
 "Please note that it's not necessary to reformat all pre-existing\n"
 "partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
+"reformat\n"
 "partitions containing data that you wish to keep (typically \"/home\").\n"
 "\n"
 "Please be careful when selecting partitions. After the formatting is\n"
@@ -5081,17 +4629,11 @@ msgstr ""
 "若您想選擇另一個分割給您的新的 Mandriva Linux 作業系統安裝, 點選了\"%s\".\n"
 "若您想選擇要被檢查磁碟上壞的區塊的分割, 點選.\"%s\"."
 
-#: help.pm:431
-#: install_steps_gtk.pm:392
-#: interactive.pm:437
-#: interactive/newt.pm:318
-#: printer/printerdrake.pm:3966
-#: standalone/drakTermServ:363
-#: standalone/drakbackup:3914
-#: standalone/drakbackup:3953
-#: standalone/drakbackup:4064
-#: standalone/drakbackup:4079
-#: ugtk2.pm:508
+#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
+#: interactive/newt.pm:318 printer/printerdrake.pm:3971
+#: standalone/drakTermServ:363 standalone/drakbackup:3914
+#: standalone/drakbackup:3953 standalone/drakbackup:4064
+#: standalone/drakbackup:4079 ugtk2.pm:508
 #, c-format
 msgid "Previous"
 msgstr "上一步"
@@ -5120,11 +4662,8 @@ msgstr ""
 "跟您近的. 一個套件選擇樹將出現: 審查選擇, 按下 \"%s\" 來擷取且安裝\n"
 "被選擇的套件, 或 \"%s\" 以中斷放棄."
 
-#: help.pm:444
-#: help.pm:588
-#: install_steps_gtk.pm:391
-#: install_steps_interactive.pm:157
-#: standalone/drakbackup:4111
+#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
+#: install_steps_interactive.pm:157 standalone/drakbackup:4111
 #, c-format
 msgid "Install"
 msgstr "安裝"
@@ -5150,7 +4689,8 @@ msgstr ""
 "安全性等級應該設定較高. 權衡之下, 較高的安全性等級換得不容易使用.\n"
 "\n"
 "如果您不知道選什麼, 保留預設選項. 您將能在稍後用 draksec 工具改變它,\n"
-"draksec 是 Mandriva Linux 控制中心的一部分.用負責安全性的人的 e-mail 地址填入 \"%s\" 欄位. 安全性訊息將被寄到\n"
+"draksec 是 Mandriva Linux 控制中心的一部分.用負責安全性的人的 e-mail 地址填"
+"入 \"%s\" 欄位. 安全性訊息將被寄到\n"
 "那個位址."
 
 #: help.pm:458
@@ -5287,7 +4827,8 @@ msgstr ""
 "閱讀 ext2FS 章節.\n"
 "\n"
 "如果您正在安裝於一個 PPC 機器, 您將想要建立一個小的 HFS\n"
-"``bootstrap'' 分割至少 1MB 以用於 yaboot 開機載入器. 如果您選擇使分割大一些,\n"
+"``bootstrap'' 分割至少 1MB 以用於 yaboot 開機載入器. 如果您選擇使分割大一"
+"些,\n"
 "像 50MB, 您或許發現它是一個好用的貯存一個備用核心與 ramdisk\n"
 "影像給緊急使用開機的好地方."
 
@@ -5334,7 +4875,8 @@ msgid ""
 "\"Windows name\" is the letter of your hard drive under Windows (the first\n"
 "disk or partition is called \"C:\")."
 msgstr ""
-"多於一個 Microsoft 分割區已經在您的硬碟上被偵測到. 請選擇您希望要重新調整 大小的分割以便安裝您的新的 Mandriva Linux 作業系統.\n"
+"多於一個 Microsoft 分割區已經在您的硬碟上被偵測到. 請選擇您希望要重新調整 大"
+"小的分割以便安裝您的新的 Mandriva Linux 作業系統.\n"
 "\n"
 "每個分割區都列出了像是: \"Linux 名稱\", \"Windows 名稱\", \"容量\".\n"
 "\n"
@@ -5354,7 +4896,8 @@ msgstr ""
 "\n"
 " * \"d\"這是指\"secondary IDE controller 上第二台 (slave) 硬碟\".\n"
 "\n"
-"以 SCSI 硬碟來說, \"a\" 是指 \"SCSI ID 編號最小的那一台硬碟\", \"b\" 是指\"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去.....\n"
+"以 SCSI 硬碟來說, \"a\" 是指 \"SCSI ID 編號最小的那一台硬碟\", \"b\" 是指"
+"\"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去.....\n"
 "\n"
 "\"Windows 名稱\" 是在 Windows 下的磁碟機代號名稱 (第一個磁碟或分割稱為\n"
 "\"C:\")."
@@ -5363,7 +4906,8 @@ msgstr ""
 #, c-format
 msgid ""
 "\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in the\n"
+"click on the \"%s\" button and choose another. If your country is not in "
+"the\n"
 "list shown, click on the \"%s\" button to get the complete country list."
 msgstr ""
 "\"%s\"：檢視目前選擇的國家。如果您不在這個國家，\n"
@@ -5386,7 +4930,8 @@ msgid ""
 "the file system, you should use this option.\n"
 "\n"
 " * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current partitioning\n"
+"currently installed on your Mandriva Linux system. Your current "
+"partitioning\n"
 "scheme and user data will not be altered. Most of the other configuration\n"
 "steps remain available and are similar to a standard installation.\n"
 "\n"
@@ -5460,7 +5005,8 @@ msgid ""
 "\n"
 "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
 "cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 will\n"
+"still under development. For that reason, Mandriva Linux's use of UTF-8 "
+"will\n"
 "depend on the user's choices:\n"
 "\n"
 " * If you choose a language with a strong legacy encoding (latin1\n"
@@ -5491,12 +5037,14 @@ msgstr ""
 "您選擇的偏好語言一般來說將影響安裝、文件、與系統。先選擇您在的區域，然後\n"
 "是您說的語言.\n"
 "\n"
-"點選 \"%s\" 按鍵將允許您選擇其他語言來安裝在您的工作站上, 因此, 安裝特殊語言\n"
+"點選 \"%s\" 按鍵將允許您選擇其他語言來安裝在您的工作站上, 因此, 安裝特殊語"
+"言\n"
 "檔案給系統文件與應用程式. 例如, 如果西班牙使用者會用您的機器, 在樹狀檢視中\n"
 "選擇英文當預設語言且在進階部份選擇 \"%s\".\n"
 "\n"
 "關於 UTF-8 (unicode) 支援：Unicode 是一個新的字元編碼以涵蓋所有存在的語言。\n"
-"然而, 在 GNU/Linux 下完全的支援仍然在開發中. 因為那個原因, Mandriva Linux 的\n"
+"然而, 在 GNU/Linux 下完全的支援仍然在開發中. 因為那個原因, Mandriva Linux "
+"的\n"
 " UTF-8 使用將根據使用者的選擇而定：\n"
 "\n"
 " * 如果您選擇一個有偏重傳統編碼的語言 (latin1 語言、俄羅斯文、日文、中文、\n"
@@ -5504,7 +5052,8 @@ msgstr ""
 "\n"
 " * 其他語言將使用 unicode 為預設;\n"
 "\n"
-" * 如果兩個或兩個以上的語言被需要, 且那些語言不用相同的編碼, 則 unicode 將被用於整個系統；\n"
+" * 如果兩個或兩個以上的語言被需要, 且那些語言不用相同的編碼, 則 unicode 將被"
+"用於整個系統；\n"
 "\n"
 " * 最後，unicode 也可以被強制使用於整個系統，藉由使用者的選擇 \"%s\" 選項\n"
 "來要求之.\n"
@@ -5562,15 +5111,18 @@ msgstr ""
 "DrakX 將會自動知道您的滑鼠是否使用 PS/2, 序列埠 或 USB 介面.\n"
 "\n"
 " 如果您有一個無滾輪的三鍵滑鼠, 您可以選擇 \"%s\" 滑鼠. DrakX 將會設定您的\n"
-"滑鼠以至於您可以用它模擬滾輪: 為了要使用它, 按下中間鍵且上下移動您的滑鼠指標.\n"
+"滑鼠以至於您可以用它模擬滾輪: 為了要使用它, 按下中間鍵且上下移動您的滑鼠指"
+"標.\n"
 "\n"
 "如果由於某些原因您想指定一個不同的滑鼠類型, 從提供的清單中選它.\n"
 "\n"
-"您可以選擇 \"%s\" 項目來選擇一個 ``generic (一般)'' 滑鼠型態, 適用於幾乎全部\n"
+"您可以選擇 \"%s\" 項目來選擇一個 ``generic (一般)'' 滑鼠型態, 適用於幾乎全"
+"部\n"
 "的滑鼠.\n"
 "\n"
 "如果您選擇一個不同於預設值的滑鼠，將會顯示一個測試畫面。使用按鍵與滾輪來\n"
-"確認設定值是正確的且滑鼠正確工作。如果滑鼠不能工作，請按下空白鍵或 [Return] 鍵\n"
+"確認設定值是正確的且滑鼠正確工作。如果滑鼠不能工作，請按下空白鍵或 [Return] "
+"鍵\n"
 "以取消測試且您將回到滑鼠清單.\n"
 "\n"
 "某些情況下, 滾輪滑鼠不能被自動偵測, 所以您將需要從清單中選擇您的滑鼠.\n"
@@ -5618,7 +5170,8 @@ msgid ""
 "characters long. Never write down the \"root\" password -- it makes it far\n"
 "too easy to compromise your system.\n"
 "\n"
-"One caveat: do not make the password too long or too complicated because you\n"
+"One caveat: do not make the password too long or too complicated because "
+"you\n"
 "must be able to remember it!\n"
 "\n"
 "The password will not be displayed on screen as you type it. To reduce the\n"
@@ -5640,7 +5193,8 @@ msgstr ""
 "這是最重要的 GNU/Linux 系統安全性決定點: 你一定要輸入 \"root\" 密碼.\n"
 "\"root\" 是系統管理員且是被授權做更新, 增加使用者, 變更整個系統設定等等\n"
 "的人。簡而言之，\"root\" 能做任何事！那就是為什麼您必須要選擇一個很難猜中\n"
-"的密碼. DrakX 將告訴您您的密碼是否太簡單. 就像您所見的一樣, 您並不被強制輸入\n"
+"的密碼. DrakX 將告訴您您的密碼是否太簡單. 就像您所見的一樣, 您並不被強制輸"
+"入\n"
 "一個密碼, 但是我們強烈建議如此. GNU/Linux 就像其他任何作業系統一般易於受\n"
 "操作手誤影響。因為 \"root\" 可以克服全部限制且藉由不小心存取分割，可以\n"
 "不經意地抹除所有分割上的資料，因此讓成為 \"root\" 身分很困難是極重要的。\n"
@@ -5683,7 +5237,8 @@ msgid ""
 "\n"
 "If DrakX can not determine where to place the boot sector, it'll ask you\n"
 "where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if you\n"
+"Choosing \"%s\" will not install any boot loader. Use this option only if "
+"you\n"
 "know what you're doing."
 msgstr ""
 "開機載入器是在電腦開機時啟動的程式。它負責啟動整個系統。正常的話，開機載入\n"
@@ -5727,11 +5282,14 @@ msgid ""
 "Control Center and clicking on the \"%s\" button."
 msgstr ""
 "現在要選擇您的電腦要使用的列印系統. 其他作業系統或許只有提供您一種選擇,\n"
-"但是 Mandriva Linux 這邊提供了兩種選擇. 每一種列印系統是最適合於特別設定型態.\n"
+"但是 Mandriva Linux 這邊提供了兩種選擇. 每一種列印系統是最適合於特別設定型"
+"態.\n"
 "\n"
-" * \"%s\" - 是 ``print, do not queue (列印, 不排隊)'' 之縮寫字, 是當您有一個\n"
+" * \"%s\" - 是 ``print, do not queue (列印, 不排隊)'' 之縮寫字, 是當您有一"
+"個\n"
 "直接連線的印表機, 您不想因為卡紙而驚慌, 且您沒有網路印表機. (\"%s\"\n"
-"只將會處理非常簡單的網路條件且當用於網路時有些慢) 如果這是您第一次 GNU/Linux\n"
+"只將會處理非常簡單的網路條件且當用於網路時有些慢) 如果這是您第一次 GNU/"
+"Linux\n"
 "經驗, 建議您使用\"pdq\".\n"
 "\n"
 " * \"%s\" 是 ``Common Unix Printing System (通用 Unix 列印系統)'', 這是一套\n"
@@ -5749,9 +5307,7 @@ msgstr ""
 msgid "pdq"
 msgstr "pdq"
 
-#: help.pm:765
-#: printer/cups.pm:115
-#: printer/data.pm:121
+#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
 #, c-format
 msgid "CUPS"
 msgstr "CUPS"
@@ -5784,7 +5340,8 @@ msgstr ""
 "DrakX 將要偵測您電腦上的 IDE 裝置. 它也會順便掃描您系統上的 PCI\n"
 "SCSI 介面卡. 當偵測到 SCSI 卡時, DrakX 將會自動安裝適當的驅動程式\n"
 "\n"
-"因為也許無法完全的偵測出您的系統是否還有更多的硬體裝置, 所以 DrakX或許會失敗偵測您的硬碟. 若是這樣, 您必須手動指定您的硬體.\n"
+"因為也許無法完全的偵測出您的系統是否還有更多的硬體裝置, 所以 DrakX或許會失敗"
+"偵測您的硬碟. 若是這樣, 您必須手動指定您的硬體.\n"
 "\n"
 "如果您必須手動方式指定您的 PCI SCSI 適配器時, DrakX 會詢問您是否要對這個\n"
 "驅動程式設定選項參數. 您應該要允許 DrakX 能夠先自動偵測硬體卡特別的選項參數\n"
@@ -5803,9 +5360,7 @@ msgstr ""
 "\"%s\": 如果您的系統上有偵測到音效卡，它將會顯示在這裡。如果您發現這並不是\n"
 "目前您的系統使用的音效卡，您可以按下按鈕並選擇另一個驅動程式。"
 
-#: help.pm:788
-#: help.pm:855
-#: install_steps_interactive.pm:1010
+#: help.pm:788 help.pm:855 install_steps_interactive.pm:1010
 #: install_steps_interactive.pm:1027
 #, c-format
 msgid "Sound card"
@@ -5857,7 +5412,8 @@ msgid ""
 "\n"
 " * \"%s\": if you wish to configure your Internet or local network access,\n"
 "you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to benefit\n"
+"Mandriva Linux Control Center after the installation has finished to "
+"benefit\n"
 "from full in-line help.\n"
 "\n"
 " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
@@ -5881,16 +5437,13 @@ msgid ""
 "idea to review this setup."
 msgstr ""
 
-#: help.pm:855
-#: install_steps_interactive.pm:874
-#: install_steps_interactive.pm:969
-#: standalone/drakclock:100
+#: help.pm:855 install_steps_interactive.pm:874
+#: install_steps_interactive.pm:969 standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1043
+#: help.pm:855 install_steps_interactive.pm:1043
 #, c-format
 msgid "TV card"
 msgstr "電視卡"
@@ -5905,44 +5458,34 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "圖形介面"
 
-#: help.pm:855
-#: install_any.pm:1712
-#: install_steps_interactive.pm:1061
+#: help.pm:855 install_any.pm:1712 install_steps_interactive.pm:1061
 #: standalone/drakbackup:2035
 #, c-format
 msgid "Network"
 msgstr "網路"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1073
+#: help.pm:855 install_steps_interactive.pm:1073
 #, c-format
 msgid "Proxies"
 msgstr "代理伺服器"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1084
+#: help.pm:855 install_steps_interactive.pm:1084
 #, c-format
 msgid "Security Level"
 msgstr "安全層級"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1098
-#: network/drakfirewall.pm:189
+#: help.pm:855 install_steps_interactive.pm:1098 network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "防火牆"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1114
+#: help.pm:855 install_steps_interactive.pm:1114
 #, c-format
 msgid "Bootloader"
 msgstr "開機載入器"
 
-#: help.pm:855
-#: install_steps_interactive.pm:1127
-#: services.pm:114
-#: services.pm:157
-#: services.pm:193
+#: help.pm:855 install_steps_interactive.pm:1127 services.pm:114
+#: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
 msgstr "服務"
@@ -5986,9 +5529,13 @@ msgstr "<- 上一步"
 
 #: install2.pm:115
 #, c-format
-msgid "Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
+msgid ""
+"Can not access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
-"無法存取對應您的核心的核心模組 (檔案 %s 遺失)，這一般表示您的開機軟片不同步於\n"
+"無法存取對應您的核心的核心模組 (檔案 %s 遺失)，這一般表示您的開機軟片不同步"
+"於\n"
 "安裝媒介 (請建立一個更新的開機磁片)"
 
 #: install2.pm:169
@@ -6015,12 +5562,9 @@ msgstr ""
 "\n"
 "您有補充安裝媒介要設定嗎?"
 
-#: install_any.pm:417
-#: printer/printerdrake.pm:3296
-#: printer/printerdrake.pm:3303
-#: standalone/scannerdrake:182
-#: standalone/scannerdrake:190
-#: standalone/scannerdrake:241
+#: install_any.pm:417 printer/printerdrake.pm:3301
+#: printer/printerdrake.pm:3308 standalone/scannerdrake:182
+#: standalone/scannerdrake:190 standalone/scannerdrake:241
 #: standalone/scannerdrake:248
 #, c-format
 msgid "CD-ROM"
@@ -6046,8 +5590,7 @@ msgstr "網路 (NFS)"
 msgid "Insert the CD 1 again"
 msgstr "請再次插入光碟 1"
 
-#: install_any.pm:473
-#: standalone/drakbackup:112
+#: install_any.pm:473 standalone/drakbackup:112
 #, c-format
 msgid "No device found"
 msgstr "沒有找到任何裝置"
@@ -6062,8 +5605,7 @@ msgstr "請插入光碟"
 msgid "Unable to mount CD-ROM"
 msgstr "無法掛載光碟機"
 
-#: install_any.pm:516
-#: install_any.pm:535
+#: install_any.pm:516 install_any.pm:535
 #, c-format
 msgid "URL of the mirror?"
 msgstr "映像站的 URL？"
@@ -6083,15 +5625,16 @@ msgstr "請輸入您的 NFS 媒介的主機和目錄名稱"
 msgid "Hostname of the NFS mount ?"
 msgstr "NFS 掛載點的主機名稱？"
 
-#: install_any.pm:522
-#: standalone/draknfs:288
+#: install_any.pm:522 standalone/draknfs:288
 #, c-format
 msgid "Directory"
 msgstr "目錄"
 
 #: install_any.pm:571
 #, c-format
-msgid "Can't find a package list file on this mirror. Make sure the location is correct."
+msgid ""
+"Can't find a package list file on this mirror. Make sure the location is "
+"correct."
 msgstr "無法在這個映像站上找到套件列表檔。請確定位址是正確的。"
 
 #: install_any.pm:647
@@ -6113,7 +5656,8 @@ msgstr "正在搜尋要升級的套件..."
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done."
 msgstr ""
 "更換光碟片！\n"
 "請插入標籤為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。"
@@ -6160,8 +5704,7 @@ msgstr ""
 "\n"
 "您確定要移除這些套件嗎？\n"
 
-#: install_any.pm:1375
-#: partition_table.pm:597
+#: install_any.pm:1375 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "讀取檔案 %s 時發生錯誤"
@@ -6178,8 +5721,12 @@ msgstr "%s (原本為 %s)"
 
 #: install_any.pm:1649
 #, c-format
-msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
-msgstr "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體以找出問題的原因所在"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體"
+"以找出問題的原因所在"
 
 #: install_any.pm:1693
 #, c-format
@@ -6272,8 +5819,7 @@ msgstr ""
 "\n"
 "不管如何都要繼續？"
 
-#: install_interactive.pm:70
-#: install_steps.pm:218
+#: install_interactive.pm:70 install_steps.pm:218
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
@@ -6344,8 +5890,13 @@ msgstr "計算 Windows 分割區大小"
 
 #: install_interactive.pm:163
 #, c-format
-msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandriva Linux installation."
-msgstr "您的 Windows 分割區太支離破碎。請先用 Windows 重新開機，執行  ``defrag'' 工具程式，然後重新開始安裝 Mandriva Linux 。"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
+"installation."
+msgstr ""
+"您的 Windows 分割區太支離破碎。請先用 Windows 重新開機，執行  ``defrag'' 工具"
+"程式，然後重新開始安裝 Mandriva Linux 。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
 #: install_interactive.pm:166
@@ -6456,79 +6007,120 @@ msgstr "關閉網路"
 msgid ""
 "Introduction\n"
 "\n"
-"The operating system and the different components available in the Mandriva Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
+"The operating system and the different components available in the Mandriva "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
 "system and the different components of the Mandriva Linux distribution.\n"
 "\n"
 "\n"
 "1. License Agreement\n"
 "\n"
-"Please read this document carefully. This document is a license agreement between you and  \n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
 "Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
 "the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
 "Software Products.\n"
 "\n"
 "\n"
 "2. Limited Warranty\n"
 "\n"
-"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
 "extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or occurrence of such \n"
+"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
+"be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if Mandriva S.A. has been advised of the possibility or "
+"occurrence of such \n"
 "damages.\n"
 "\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of  downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
+"no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandriva Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
 "included in the Software Products.\n"
 "\n"
 "\n"
 "3. The GPL License and Related Licenses\n"
 "\n"
-"The Software Products consist of components created by different persons or entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the documentation for \n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to Mandriva.\n"
+"The programs developed by Mandriva S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by Mandriva S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
 "further details.\n"
 "\n"
 "\n"
 "4. Intellectual Property Rights\n"
 "\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
+"as a whole or in \n"
 "parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of Mandriva S.A.  \n"
+"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
+"Mandriva S.A.  \n"
 "\n"
 "\n"
 "5. Governing Laws \n"
 "\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
 "agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
 "For any question on this document, please contact Mandriva S.A.  \n"
 msgstr ""
 
@@ -6536,9 +6128,11 @@ msgstr ""
 #, c-format
 msgid ""
 "Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, the\n"
+"Software included may be covered by patents in your country. For example, "
+"the\n"
 "MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a patent\n"
+"http://www.mp3licensing.com for more details). If you are unsure if a "
+"patent\n"
 "may be applicable to you, check your local laws."
 msgstr ""
 
@@ -6611,7 +6205,8 @@ msgid ""
 "Remove the boot media and press return to reboot.\n"
 "\n"
 "\n"
-"For information on fixes which are available for this release of Mandriva Linux,\n"
+"For information on fixes which are available for this release of Mandriva "
+"Linux,\n"
 "consult the Errata available from:\n"
 "\n"
 "\n"
@@ -6652,14 +6247,14 @@ msgstr "重複的掛載點 %s"
 msgid ""
 "Some important packages did not get installed properly.\n"
 "Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"\n"
+"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
+"\"\n"
 msgstr ""
 "有某些重要的套件沒有被適當地安裝。\n"
 "可能是您的光碟機或者是光碟片有缺陷。\n"
 "請將光碟放在一個已經安裝好的電腦上使用 \"rpm -qpl media/main/*.rpm\" 來檢查\n"
 
-#: install_steps_auto_install.pm:75
-#: install_steps_stdio.pm:27
+#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
 #, c-format
 msgid "Entering step `%s'\n"
 msgstr "進入步驟 `%s'\n"
@@ -6668,22 +6263,21 @@ msgstr "進入步驟 `%s'\n"
 #, c-format
 msgid ""
 "Your system is low on resources. You may have some problem installing\n"
-"Mandriva Linux. If that occurs, you can try a text install instead. For this,\n"
+"Mandriva Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
 "press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
 "您的系統資源太少。您可能會在安裝 Mandriva Linux 過程中遇到問題。\n"
 "若是真的發生問題，您或許可以改用文字模式的安裝方式來取代。\n"
 "要如此作的話m，請在光碟開機時按下 `F1'，然後輸入 `text'。"
 
-#: install_steps_gtk.pm:211
-#: install_steps_gtk.pm:228
+#: install_steps_gtk.pm:211 install_steps_gtk.pm:228
 #: install_steps_interactive.pm:624
 #, c-format
 msgid "Package Group Selection"
 msgstr "套件群組選擇"
 
-#: install_steps_gtk.pm:254
-#: install_steps_interactive.pm:567
+#: install_steps_gtk.pm:254 install_steps_interactive.pm:567
 #, c-format
 msgid "Total size: %d / %d MB"
 msgstr "總共大小： %d / %d MB"
@@ -6740,7 +6334,9 @@ msgstr "為了要保留 %s"
 
 #: install_steps_gtk.pm:348
 #, c-format
-msgid "You can not select this package as there is not enough space left to install it"
+msgid ""
+"You can not select this package as there is not enough space left to install "
+"it"
 msgstr "您不可以選取這個套件，因為剩餘的空間不足以安裝它。"
 
 #: install_steps_gtk.pm:351
@@ -6797,14 +6393,12 @@ msgstr "正在更新套件的選擇"
 msgid "Minimal install"
 msgstr "最小安裝"
 
-#: install_steps_gtk.pm:414
-#: install_steps_interactive.pm:486
+#: install_steps_gtk.pm:414 install_steps_interactive.pm:486
 #, c-format
 msgid "Choose the packages you want to install"
 msgstr "選擇您想要安裝的套件"
 
-#: install_steps_gtk.pm:431
-#: install_steps_interactive.pm:710
+#: install_steps_gtk.pm:431 install_steps_interactive.pm:710
 #, c-format
 msgid "Installing"
 msgstr "正在安裝"
@@ -6829,53 +6423,46 @@ msgstr "正在估計"
 msgid "%d packages"
 msgstr "%d 套件"
 
-#: install_steps_gtk.pm:542
-#: install_steps_interactive.pm:92
+#: install_steps_gtk.pm:542 install_steps_interactive.pm:92
 #: install_steps_interactive.pm:734
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: install_steps_gtk.pm:546
-#: install_steps_interactive.pm:738
+#: install_steps_gtk.pm:546 install_steps_interactive.pm:738
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
 "If you do not have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
 "更換光碟片！\n"
 "請插入標示為為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。\n"
 "若是您沒有這片光碟，請點選取消以略過這一片光碟的安裝。"
 
-#: install_steps_gtk.pm:559
-#: install_steps_interactive.pm:749
+#: install_steps_gtk.pm:559 install_steps_interactive.pm:749
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "排列套件時發生錯誤："
 
-#: install_steps_gtk.pm:561
-#: install_steps_interactive.pm:753
+#: install_steps_gtk.pm:561 install_steps_interactive.pm:753
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "安裝套件時發生錯誤："
 
-#: install_steps_gtk.pm:563
-#: install_steps_interactive.pm:749
+#: install_steps_gtk.pm:563 install_steps_interactive.pm:749
 #: install_steps_interactive.pm:753
 #, c-format
 msgid "Go on anyway?"
 msgstr "無論如何都要繼續嗎？"
 
-#: install_steps_gtk.pm:585
-#: install_steps_interactive.pm:929
-#: steps.pm:30
+#: install_steps_gtk.pm:585 install_steps_interactive.pm:929 steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "總結"
 
-#: install_steps_gtk.pm:608
-#: install_steps_interactive.pm:925
+#: install_steps_gtk.pm:608 install_steps_interactive.pm:925
 #: install_steps_interactive.pm:1074
 #, c-format
 msgid "not configured"
@@ -6893,10 +6480,13 @@ msgstr ""
 #: install_steps_gtk.pm:680
 #, c-format
 msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive before installation.\n"
-"It will then continue from the hard drive and the packages will remain available once the system is fully installed."
+"You have the option to copy the contents of the CDs onto the hard drive "
+"before installation.\n"
+"It will then continue from the hard drive and the packages will remain "
+"available once the system is fully installed."
 msgstr ""
-"您可以選擇在安裝前將光碟的內容複製到硬碟。稍候將會由硬碟繼續安裝，並且這些套件\n"
+"您可以選擇在安裝前將光碟的內容複製到硬碟。稍候將會由硬碟繼續安裝，並且這些套"
+"件\n"
 "在安裝完畢之後仍然可以繼續使用。"
 
 #: install_steps_gtk.pm:682
@@ -6954,14 +6544,12 @@ msgstr "請選取您滑鼠的形式。"
 msgid "Mouse choice"
 msgstr ""
 
-#: install_steps_interactive.pm:205
-#: standalone/mousedrake:46
+#: install_steps_interactive.pm:205 standalone/mousedrake:46
 #, c-format
 msgid "Mouse Port"
 msgstr "滑鼠連接埠"
 
-#: install_steps_interactive.pm:206
-#: standalone/mousedrake:47
+#: install_steps_interactive.pm:206 standalone/mousedrake:47
 #, c-format
 msgid "Please choose which serial port your mouse is connected to."
 msgstr "請選取您滑鼠連接的序列埠。"
@@ -7018,16 +6606,22 @@ msgstr "選取掛載點"
 
 #: install_steps_interactive.pm:323
 #, c-format
-msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
 "沒有足夠的可用空間安裝 bootstrap！安裝還是會繼續，但是您必須在 DiskDrake\n"
 "中建立 bootstrap 分割來啟動您的系統"
 
 #: install_steps_interactive.pm:328
 #, c-format
-msgid "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
+msgid ""
+"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
+"to boot your system, you'll need to create the bootstrap partition in "
+"DiskDrake"
 msgstr ""
-"您需要建立一個 PPC PReP 開機 bootstrap！安裝還是會繼續, 但是您必須在 DiskDrake\n"
+"您需要建立一個 PPC PReP 開機 bootstrap！安裝還是會繼續, 但是您必須在 "
+"DiskDrake\n"
 "中建立 bootstrap 分割來啟動您的系統"
 
 #: install_steps_interactive.pm:364
@@ -7042,7 +6636,9 @@ msgstr "檢查壞掉的區塊?"
 
 #: install_steps_interactive.pm:394
 #, c-format
-msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can lose data)"
 msgstr "無法檢查檔案系統 %s. 您要修復該錯誤嗎? (請注意, 您可能遺失資料)"
 
 #: install_steps_interactive.pm:397
@@ -7055,21 +6651,21 @@ msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝, 請增加�
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "正在搜尋可以用的套件並且建立 rpm 資料庫..."
 
-#: install_steps_interactive.pm:405
-#: install_steps_interactive.pm:455
+#: install_steps_interactive.pm:405 install_steps_interactive.pm:455
 #, c-format
 msgid "Looking for available packages..."
 msgstr "正在搜尋可以用的套件..."
 
-#: install_steps_interactive.pm:424
-#: install_steps_interactive.pm:829
+#: install_steps_interactive.pm:424 install_steps_interactive.pm:829
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr "選取要用來抓取程式套件檔的 FTP 映射站台"
 
 #: install_steps_interactive.pm:464
 #, c-format
-msgid "Your system does not have enough space left for installation or upgrade (%d > %d)"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
 msgstr "您的系統沒有足夠的空間可以用來安裝或升級了 (%d > %d)"
 
 #: install_steps_interactive.pm:498
@@ -7086,10 +6682,8 @@ msgstr ""
 msgid "Load"
 msgstr "負載"
 
-#: install_steps_interactive.pm:500
-#: standalone/drakbackup:3932
-#: standalone/drakbackup:4005
-#: standalone/logdrake:172
+#: install_steps_interactive.pm:500 standalone/drakbackup:3932
+#: standalone/drakbackup:4005 standalone/logdrake:172
 #, c-format
 msgid "Save"
 msgstr "儲存"
@@ -7128,8 +6722,7 @@ msgstr "包含基本的說明文件 (被建議的!)"
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "真正最小安裝 (尤其無 urpmi)"
 
-#: install_steps_interactive.pm:641
-#: standalone/drakxtv:52
+#: install_steps_interactive.pm:641 standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "全部"
@@ -7200,7 +6793,8 @@ msgstr ""
 
 #: install_steps_interactive.pm:824
 #, c-format
-msgid "Contacting Mandriva Linux web site to get the list of available mirrors..."
+msgid ""
+"Contacting Mandriva Linux web site to get the list of available mirrors..."
 msgstr "連結到 Mirror Linux Web Site 查詢可用的映射站台"
 
 #: install_steps_interactive.pm:843
@@ -7218,8 +6812,7 @@ msgstr "無法聯繫映射站台 %s"
 msgid "Would you like to try again?"
 msgstr "您要再試一次嗎?"
 
-#: install_steps_interactive.pm:874
-#: standalone/drakclock:45
+#: install_steps_interactive.pm:874 standalone/drakclock:45
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何?"
@@ -7234,28 +6827,22 @@ msgstr "自動時間同步(使用 NTP 服務)"
 msgid "NTP Server"
 msgstr "NTP 伺服器"
 
-#: install_steps_interactive.pm:942
-#: install_steps_interactive.pm:950
-#: install_steps_interactive.pm:968
-#: install_steps_interactive.pm:975
-#: install_steps_interactive.pm:1126
-#: services.pm:133
+#: install_steps_interactive.pm:942 install_steps_interactive.pm:950
+#: install_steps_interactive.pm:968 install_steps_interactive.pm:975
+#: install_steps_interactive.pm:1126 services.pm:133
 #: standalone/drakbackup:1576
 #, c-format
 msgid "System"
 msgstr "系統"
 
-#: install_steps_interactive.pm:982
-#: install_steps_interactive.pm:1009
-#: install_steps_interactive.pm:1026
-#: install_steps_interactive.pm:1042
+#: install_steps_interactive.pm:982 install_steps_interactive.pm:1009
+#: install_steps_interactive.pm:1026 install_steps_interactive.pm:1042
 #: install_steps_interactive.pm:1053
 #, c-format
 msgid "Hardware"
 msgstr "硬體"
 
-#: install_steps_interactive.pm:988
-#: install_steps_interactive.pm:997
+#: install_steps_interactive.pm:988 install_steps_interactive.pm:997
 #, c-format
 msgid "Remote CUPS server"
 msgstr "遠端 CUPS 伺服器"
@@ -7272,7 +6859,9 @@ msgstr "您有 ISA 音效卡嗎?"
 
 #: install_steps_interactive.pm:1032
 #, c-format
-msgid "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
+"card"
 msgstr "請在安裝完畢後, 執行 \"alsaconf\" 或 \"sndconfig\" 來設定您的音效卡"
 
 #: install_steps_interactive.pm:1034
@@ -7285,8 +6874,7 @@ msgstr "沒偵測到任何音效卡. 請在安裝後嘗試 \"harddrake\" 進行�
 msgid "Graphical interface"
 msgstr "圖形介面"
 
-#: install_steps_interactive.pm:1060
-#: install_steps_interactive.pm:1072
+#: install_steps_interactive.pm:1060 install_steps_interactive.pm:1072
 #, c-format
 msgid "Network & Internet"
 msgstr "網路 & 網際網路"
@@ -7296,10 +6884,8 @@ msgstr "網路 & 網際網路"
 msgid "configured"
 msgstr "已設定"
 
-#: install_steps_interactive.pm:1083
-#: install_steps_interactive.pm:1097
-#: security/level.pm:55
-#: steps.pm:20
+#: install_steps_interactive.pm:1083 install_steps_interactive.pm:1097
+#: security/level.pm:55 steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "安全性"
@@ -7320,42 +6906,45 @@ msgid "Boot"
 msgstr "重新開機"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1117
-#: printer/printerdrake.pm:974
+#: install_steps_interactive.pm:1117 printer/printerdrake.pm:974
 #, c-format
 msgid "%s on %s"
 msgstr "%2$s 上的 %1$s"
 
-#: install_steps_interactive.pm:1131
-#: services.pm:175
+#: install_steps_interactive.pm:1131 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "服務: %d 已經啟動 給 %d 註冊的項目"
 
-#: install_steps_interactive.pm:1141
+#: install_steps_interactive.pm:1143
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "您尚未設定 X。您確定您真的要這樣做？"
 
-#: install_steps_interactive.pm:1222
+#: install_steps_interactive.pm:1224
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "正在準備開機載入器..."
 
-#: install_steps_interactive.pm:1232
+#: install_steps_interactive.pm:1234
 #, c-format
-msgid "You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s"
+msgid ""
+"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
+"will not work for you. The install will continue, but you'll need to use "
+"BootX or some other means to boot your machine. The kernel argument for the "
+"root fs is: root=%s"
 msgstr ""
 "您的系統似乎有 OldWorld 或者是其他不認識的機器,\n"
 "這將會導致 yaboot 開機載入器無法正常運作.\n"
-"安裝還是會繼續下去, 不過您將需要使用 bootX 或某些其他方法來開機你的機器.root fs 的核心參數是：root=%s"
+"安裝還是會繼續下去, 不過您將需要使用 bootX 或某些其他方法來開機你的機器.root "
+"fs 的核心參數是：root=%s"
 
-#: install_steps_interactive.pm:1238
+#: install_steps_interactive.pm:1240
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 嗎?"
 
-#: install_steps_interactive.pm:1241
+#: install_steps_interactive.pm:1243
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -7364,28 +6953,29 @@ msgstr ""
 "安裝 aboot 時發生錯誤,\n"
 "你要冒著可能毀損第一個分割區的危險強迫安裝嗎?"
 
-#: install_steps_interactive.pm:1258
+#: install_steps_interactive.pm:1260
 #, c-format
-msgid "In this security level, access to the files in the Windows partition is restricted to the administrator."
+msgid ""
+"In this security level, access to the files in the Windows partition is "
+"restricted to the administrator."
 msgstr ""
 
-#: install_steps_interactive.pm:1287
-#: standalone/drakautoinst:76
+#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "請在 %s 中插入一片空白軟片"
 
-#: install_steps_interactive.pm:1292
+#: install_steps_interactive.pm:1294
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "請插入另一張軟片給驅動磁碟"
 
-#: install_steps_interactive.pm:1294
+#: install_steps_interactive.pm:1296
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "正在製作自動安裝軟片..."
 
-#: install_steps_interactive.pm:1306
+#: install_steps_interactive.pm:1308
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -7396,24 +6986,19 @@ msgstr ""
 "\n"
 "您確定要結束安裝程式?"
 
-#: install_steps_interactive.pm:1316
-#: standalone/draksambashare:416
-#: standalone/draksambashare:523
-#: standalone/drakups:120
-#: standalone/drakups:159
-#: standalone/logdrake:449
-#: standalone/logdrake:455
+#: install_steps_interactive.pm:1318 standalone/draksambashare:416
+#: standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159
+#: standalone/logdrake:449 standalone/logdrake:455
 #, c-format
 msgid "Congratulations"
 msgstr "恭喜"
 
-#: install_steps_interactive.pm:1324
-#: install_steps_interactive.pm:1325
+#: install_steps_interactive.pm:1326 install_steps_interactive.pm:1327
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "製作自動安裝軟片"
 
-#: install_steps_interactive.pm:1326
+#: install_steps_interactive.pm:1328
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -7435,7 +7020,8 @@ msgstr "Mandriva Linux 安裝程式 %s"
 #. -PO: This string must fit in a 80-char wide text screen
 #: install_steps_newt.pm:34
 #, c-format
-msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid ""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr "  <Tab>/<Alt-Tab> 在元件間移動  | <Space> 選取 | <F12> 下個螢幕 "
 
 #: interactive.pm:196
@@ -7443,45 +7029,27 @@ msgstr "  <Tab>/<Alt-Tab> 在元件間移動  | <Space> 選取 | <F12> 下個螢
 msgid "Choose a file"
 msgstr "選擇一個檔案"
 
-#: interactive.pm:321
-#: interactive/gtk.pm:507
-#: standalone/drakbackup:1517
-#: standalone/drakfont:655
-#: standalone/drakhosts:242
-#: standalone/draknfs:605
-#: standalone/draksambashare:1123
-#: standalone/drakups:301
-#: standalone/drakups:361
-#: standalone/drakups:381
-#: standalone/drakvpn:319
+#: interactive.pm:321 interactive/gtk.pm:507 standalone/drakbackup:1517
+#: standalone/drakfont:655 standalone/drakhosts:242 standalone/draknfs:605
+#: standalone/draksambashare:1123 standalone/drakups:301
+#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
 #: standalone/drakvpn:680
 #, c-format
 msgid "Add"
 msgstr "增加"
 
-#: interactive.pm:321
-#: interactive/gtk.pm:507
-#: standalone/drakhosts:249
-#: standalone/draknfs:612
-#: standalone/draksambashare:1080
-#: standalone/draksambashare:1133
-#: standalone/draksambashare:1172
+#: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:249
+#: standalone/draknfs:612 standalone/draksambashare:1080
+#: standalone/draksambashare:1133 standalone/draksambashare:1172
 #, c-format
 msgid "Modify"
 msgstr "修改"
 
-#: interactive.pm:321
-#: interactive/gtk.pm:507
-#: standalone/drakhosts:256
-#: standalone/draknfs:619
-#: standalone/draksambashare:1081
-#: standalone/draksambashare:1141
-#: standalone/draksambashare:1180
-#: standalone/drakups:303
-#: standalone/drakups:363
-#: standalone/drakups:383
-#: standalone/drakvpn:319
-#: standalone/drakvpn:680
+#: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:256
+#: standalone/draknfs:619 standalone/draksambashare:1081
+#: standalone/draksambashare:1141 standalone/draksambashare:1180
+#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
+#: standalone/drakvpn:319 standalone/drakvpn:680
 #, c-format
 msgid "Remove"
 msgstr "移除"
@@ -7491,9 +7059,7 @@ msgstr "移除"
 msgid "Basic"
 msgstr "基本"
 
-#: interactive.pm:436
-#: interactive/newt.pm:321
-#: ugtk2.pm:510
+#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:510
 #, c-format
 msgid "Finish"
 msgstr "完成"
@@ -7503,14 +7069,12 @@ msgstr "完成"
 msgid "Do"
 msgstr "做"
 
-#: interactive/stdio.pm:29
-#: interactive/stdio.pm:148
+#: interactive/stdio.pm:29 interactive/stdio.pm:148
 #, c-format
 msgid "Bad choice, try again\n"
 msgstr "壞選擇, 再試一遍\n"
 
-#: interactive/stdio.pm:30
-#: interactive/stdio.pm:149
+#: interactive/stdio.pm:30 interactive/stdio.pm:149
 #, c-format
 msgid "Your choice? (default %s) "
 msgstr "您的選擇? (預設為 %s) "
@@ -7578,16 +7142,14 @@ msgstr ""
 msgid "Re-submit"
 msgstr "重新送出"
 
-#: keyboard.pm:171
-#: keyboard.pm:205
+#: keyboard.pm:171 keyboard.pm:205
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Czech (QWERTZ)"
 msgstr "捷克 (QWERTZ)"
 
-#: keyboard.pm:172
-#: keyboard.pm:207
+#: keyboard.pm:172 keyboard.pm:207
 #, c-format
 msgid ""
 "_: keyboard\n"
@@ -7601,32 +7163,28 @@ msgid ""
 "Dvorak"
 msgstr "Dvorak 配置"
 
-#: keyboard.pm:174
-#: keyboard.pm:224
+#: keyboard.pm:174 keyboard.pm:224
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Spanish"
 msgstr "西班牙"
 
-#: keyboard.pm:175
-#: keyboard.pm:225
+#: keyboard.pm:175 keyboard.pm:225
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Finnish"
 msgstr "芬蘭"
 
-#: keyboard.pm:176
-#: keyboard.pm:228
+#: keyboard.pm:176 keyboard.pm:228
 #, c-format
 msgid ""
 "_: keyboard\n"
 "French"
 msgstr "法語"
 
-#: keyboard.pm:177
-#: keyboard.pm:272
+#: keyboard.pm:177 keyboard.pm:272
 #, c-format
 msgid ""
 "_: keyboard\n"
@@ -7640,30 +7198,26 @@ msgid ""
 "Polish"
 msgstr "波蘭"
 
-#: keyboard.pm:179
-#: keyboard.pm:284
+#: keyboard.pm:179 keyboard.pm:284
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Russian"
 msgstr "俄羅斯"
 
-#: keyboard.pm:181
-#: keyboard.pm:290
+#: keyboard.pm:181 keyboard.pm:290
 #, c-format
 msgid ""
 "_: keyboard\n"
 "Swedish"
 msgstr "瑞典"
 
-#: keyboard.pm:182
-#: keyboard.pm:320
+#: keyboard.pm:182 keyboard.pm:320
 #, c-format
 msgid "UK keyboard"
 msgstr "英式鍵盤"
 
-#: keyboard.pm:183
-#: keyboard.pm:323
+#: keyboard.pm:183 keyboard.pm:323
 #, c-format
 msgid "US keyboard"
 msgstr "美式鍵盤"
@@ -8496,8 +8050,7 @@ msgstr "default:LTR"
 msgid "Andorra"
 msgstr "安道爾"
 
-#: lang.pm:196
-#: network/adsl_consts.pm:943
+#: lang.pm:196 network/adsl_consts.pm:943
 #, c-format
 msgid "United Arab Emirates"
 msgstr "阿拉伯聯合大公國"
@@ -8542,9 +8095,7 @@ msgstr "安哥拉"
 msgid "Antarctica"
 msgstr "南極洲"
 
-#: lang.pm:205
-#: network/adsl_consts.pm:55
-#: standalone/drakxtv:50
+#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
 #, c-format
 msgid "Argentina"
 msgstr "阿根廷"
@@ -8584,9 +8135,7 @@ msgstr "孟加拉"
 msgid "Burkina Faso"
 msgstr "布吉納法索"
 
-#: lang.pm:216
-#: network/adsl_consts.pm:170
-#: network/adsl_consts.pm:179
+#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
 #, c-format
 msgid "Bulgaria"
 msgstr "保加利亞"
@@ -8691,27 +8240,16 @@ msgstr "智利"
 msgid "Cameroon"
 msgstr "喀麥隆"
 
-#: lang.pm:240
-#: network/adsl_consts.pm:188
-#: network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206
-#: network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224
-#: network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242
-#: network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260
-#: network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278
-#: network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296
-#: network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314
-#: network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332
-#: network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350
-#: network/adsl_consts.pm:359
+#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
+#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
+#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
+#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
+#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
+#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
+#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
+#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
+#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
+#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
 #, c-format
 msgid "China"
 msgstr "中國"
@@ -8761,8 +8299,7 @@ msgstr "多米尼克聯邦"
 msgid "Dominican Republic"
 msgstr "多明尼加共和國"
 
-#: lang.pm:254
-#: network/adsl_consts.pm:44
+#: lang.pm:254 network/adsl_consts.pm:44
 #, c-format
 msgid "Algeria"
 msgstr "阿爾及利亞"
@@ -8817,9 +8354,7 @@ msgstr "法羅群島"
 msgid "Gabon"
 msgstr "加彭"
 
-#: lang.pm:269
-#: network/adsl_consts.pm:954
-#: network/adsl_consts.pm:965
+#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
 #: network/netconnect.pm:46
 #, c-format
 msgid "United Kingdom"
@@ -9055,8 +8590,7 @@ msgstr "利比利亞"
 msgid "Lesotho"
 msgstr "賴索托"
 
-#: lang.pm:322
-#: network/adsl_consts.pm:600
+#: lang.pm:322 network/adsl_consts.pm:600
 #, c-format
 msgid "Lithuania"
 msgstr "立陶宛"
@@ -9076,8 +8610,7 @@ msgstr "拉脫維亞"
 msgid "Libya"
 msgstr "利比亞"
 
-#: lang.pm:326
-#: network/adsl_consts.pm:609
+#: lang.pm:326 network/adsl_consts.pm:609
 #, c-format
 msgid "Morocco"
 msgstr "摩洛哥"
@@ -9337,8 +8870,7 @@ msgstr "新加坡"
 msgid "Saint Helena"
 msgstr "聖赫勒拿島"
 
-#: lang.pm:385
-#: network/adsl_consts.pm:747
+#: lang.pm:385 network/adsl_consts.pm:747
 #, c-format
 msgid "Slovenia"
 msgstr "斯洛維尼亞"
@@ -9358,8 +8890,7 @@ msgstr "獅子山"
 msgid "San Marino"
 msgstr "聖馬利諾"
 
-#: lang.pm:390
-#: network/adsl_consts.pm:737
+#: lang.pm:390 network/adsl_consts.pm:737
 #, c-format
 msgid "Senegal"
 msgstr "塞內加爾"
@@ -9434,8 +8965,7 @@ msgstr "東帝汶"
 msgid "Turkmenistan"
 msgstr "土庫曼"
 
-#: lang.pm:406
-#: network/adsl_consts.pm:931
+#: lang.pm:406 network/adsl_consts.pm:931
 #, c-format
 msgid "Tunisia"
 msgstr "突尼西亞"
@@ -9580,14 +9110,12 @@ msgstr "先移除邏輯 volume\n"
 msgid "The bootloader can't handle /boot on multiple physicals volumes"
 msgstr ""
 
-#: modules/interactive.pm:21
-#: standalone/drakconnect:1027
+#: modules/interactive.pm:21 standalone/drakconnect:1027
 #, c-format
 msgid "Parameters"
 msgstr "參數"
 
-#: modules/interactive.pm:21
-#: standalone/draksec:51
+#: modules/interactive.pm:21 standalone/draksec:51
 #, c-format
 msgid "NONE"
 msgstr "無"
@@ -9689,14 +9217,17 @@ msgstr "我應該試那個 %s 驅動程式呢？"
 #, c-format
 msgid ""
 "In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to specify\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
 "extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it should\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
 "not cause any damage."
 msgstr ""
 "某些時候, %s 驅動程式需要有附加的資訊以便適當工作,\n"
 "雖然它正常來說可以沒有他們而好好的工作. 您想要指定附加的選項給它嗎\n"
-"或是允許驅動程式偵測您的機器需要取得驅動程式需要的資訊?有時候偵測會讓電腦當機, 不過應該不至於造成任何傷害才對."
+"或是允許驅動程式偵測您的機器需要取得驅動程式需要的資訊?有時候偵測會讓電腦當"
+"機, 不過應該不至於造成任何傷害才對."
 
 #: modules/interactive.pm:143
 #, c-format
@@ -9747,8 +9278,7 @@ msgstr "用逗號分隔的字串"
 msgid "Sun - Mouse"
 msgstr "Sun - 滑鼠"
 
-#: mouse.pm:31
-#: security/level.pm:12
+#: mouse.pm:31 security/level.pm:12
 #, c-format
 msgid "Standard"
 msgstr "標準"
@@ -9768,32 +9298,21 @@ msgstr "一般 PS/2 滾輪滑鼠"
 msgid "GlidePoint"
 msgstr "GlidePoint"
 
-#: mouse.pm:36
-#: network/modem.pm:47
-#: network/modem.pm:48
-#: network/modem.pm:49
-#: network/modem.pm:68
-#: network/modem.pm:82
-#: network/modem.pm:87
-#: network/modem.pm:120
-#: network/netconnect.pm:575
-#: network/netconnect.pm:580
-#: network/netconnect.pm:592
-#: network/netconnect.pm:597
-#: network/netconnect.pm:613
-#: network/netconnect.pm:615
+#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
+#: network/modem.pm:68 network/modem.pm:82 network/modem.pm:87
+#: network/modem.pm:120 network/netconnect.pm:575 network/netconnect.pm:580
+#: network/netconnect.pm:592 network/netconnect.pm:597
+#: network/netconnect.pm:613 network/netconnect.pm:615
 #, c-format
 msgid "Automatic"
 msgstr "自動"
 
-#: mouse.pm:39
-#: mouse.pm:73
+#: mouse.pm:39 mouse.pm:73
 #, c-format
 msgid "Kensington Thinking Mouse"
 msgstr "Kensington Thinking Mouse"
 
-#: mouse.pm:40
-#: mouse.pm:68
+#: mouse.pm:40 mouse.pm:68
 #, c-format
 msgid "Genius NetMouse"
 msgstr "Genius NetMouse"
@@ -9803,26 +9322,22 @@ msgstr "Genius NetMouse"
 msgid "Genius NetScroll"
 msgstr "Genius NetScroll"
 
-#: mouse.pm:42
-#: mouse.pm:52
+#: mouse.pm:42 mouse.pm:52
 #, c-format
 msgid "Microsoft Explorer"
 msgstr "Microsoft Explorer"
 
-#: mouse.pm:47
-#: mouse.pm:79
+#: mouse.pm:47 mouse.pm:79
 #, c-format
 msgid "1 button"
 msgstr "一個按鍵"
 
-#: mouse.pm:48
-#: mouse.pm:57
+#: mouse.pm:48 mouse.pm:57
 #, c-format
 msgid "Generic 2 Button Mouse"
 msgstr "一般的兩鍵式滑鼠"
 
-#: mouse.pm:50
-#: mouse.pm:59
+#: mouse.pm:50 mouse.pm:59
 #, c-format
 msgid "Generic 3 Button Mouse with Wheel emulation"
 msgstr "一般的三鍵式滑鼠有滾輪模擬"
@@ -9937,9 +9452,7 @@ msgstr "任何 PS/2 與 USB 滑鼠"
 msgid "Microsoft Xbox Controller S"
 msgstr "Microsoft Xbox 控制器"
 
-#: mouse.pm:93
-#: standalone/drakconnect:351
-#: standalone/drakvpn:1126
+#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
 #, c-format
 msgid "none"
 msgstr "無"
@@ -9949,10 +9462,7 @@ msgstr "無"
 msgid "No mouse"
 msgstr "無滑鼠"
 
-#: mouse.pm:304
-#: mouse.pm:367
-#: mouse.pm:376
-#: mouse.pm:435
+#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
 #, c-format
 msgid "Synaptics Touchpad"
 msgstr ""
@@ -9972,8 +9482,7 @@ msgstr "為了驅動您的滑鼠"
 msgid "MOVE YOUR WHEEL!"
 msgstr "請滾動您的滾輪！"
 
-#: network/drakfirewall.pm:12
-#: share/compssUsers.pl:85
+#: network/drakfirewall.pm:12 share/compssUsers.pl:85
 #, c-format
 msgid "Web Server"
 msgstr "Web 伺服器"
@@ -10093,18 +9602,11 @@ msgstr "全部 (沒有 firewall)"
 msgid "Other ports"
 msgstr "其它埠"
 
-#: network/drakfirewall.pm:251
-#: network/drakfirewall.pm:254
-#: standalone/drakids:33
-#: standalone/drakids:134
-#: standalone/drakids:160
-#: standalone/drakids:169
-#: standalone/drakids:179
-#: standalone/drakids:246
-#: standalone/net_applet:59
-#: standalone/net_applet:180
-#: standalone/net_applet:354
-#: standalone/net_applet:391
+#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
+#: standalone/drakids:33 standalone/drakids:134 standalone/drakids:160
+#: standalone/drakids:169 standalone/drakids:179 standalone/drakids:246
+#: standalone/net_applet:59 standalone/net_applet:180
+#: standalone/net_applet:354 standalone/net_applet:391
 #, c-format
 msgid "Interactive Firewall"
 msgstr "互動式防火牆"
@@ -10112,7 +9614,8 @@ msgstr "互動式防火牆"
 #: network/drakfirewall.pm:252
 #, c-format
 msgid ""
-"You can be warned when someone access to a service or tries to intrude into your computer.\n"
+"You can be warned when someone accesses to a service or tries to intrude "
+"into your computer.\n"
 "Please select which network activity should be watched."
 msgstr ""
 
@@ -10161,45 +9664,35 @@ msgstr "%s 試圖發動密碼破解攻擊。"
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "%2$s 試圖發動 \"%1$s\" 攻擊"
 
-#: network/isdn.pm:117
-#: network/netconnect.pm:447
-#: network/netconnect.pm:536
-#: network/netconnect.pm:539
-#: network/netconnect.pm:682
+#: network/isdn.pm:117 network/netconnect.pm:447 network/netconnect.pm:536
+#: network/netconnect.pm:539 network/netconnect.pm:682
 #: network/netconnect.pm:686
 #, c-format
 msgid "Unlisted - edit manually"
 msgstr ""
 
-#: network/isdn.pm:160
-#: network/netconnect.pm:379
+#: network/isdn.pm:160 network/netconnect.pm:379
 #, c-format
 msgid "ISA / PCMCIA"
 msgstr "ISA / PCMCIA"
 
-#: network/isdn.pm:160
-#: network/netconnect.pm:379
+#: network/isdn.pm:160 network/netconnect.pm:379
 #, c-format
 msgid "I do not know"
 msgstr "我不清楚"
 
-#: network/isdn.pm:161
-#: network/netconnect.pm:379
+#: network/isdn.pm:161 network/netconnect.pm:379
 #, c-format
 msgid "PCI"
 msgstr "PCI"
 
-#: network/isdn.pm:162
-#: network/netconnect.pm:379
+#: network/isdn.pm:162 network/netconnect.pm:379
 #, c-format
 msgid "USB"
 msgstr "USB"
 
-#: network/modem.pm:47
-#: network/modem.pm:48
-#: network/modem.pm:49
-#: network/netconnect.pm:580
-#: network/netconnect.pm:597
+#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
+#: network/netconnect.pm:580 network/netconnect.pm:597
 #: network/netconnect.pm:613
 #, c-format
 msgid "Manual"
@@ -10237,8 +9730,7 @@ msgstr ""
 msgid "Unable to find the ndiswrapper interface!"
 msgstr ""
 
-#: network/netconnect.pm:69
-#: network/netconnect.pm:477
+#: network/netconnect.pm:69 network/netconnect.pm:477
 #: network/netconnect.pm:484
 #, c-format
 msgid "Manual choice"
@@ -10249,15 +9741,12 @@ msgstr "手動選擇"
 msgid "Internal ISDN card"
 msgstr "內部 ISDN 卡"
 
-#: network/netconnect.pm:80
-#: printer/printerdrake.pm:1643
-#: standalone/drakups:75
+#: network/netconnect.pm:80 printer/printerdrake.pm:1643 standalone/drakups:75
 #, c-format
 msgid "Manual configuration"
 msgstr "手動組態設定"
 
-#: network/netconnect.pm:81
-#: standalone/drakroam:113
+#: network/netconnect.pm:81 standalone/drakroam:113
 #, c-format
 msgid "Automatic IP (BOOTP/DHCP)"
 msgstr "自動 IP (BOOTP/DHCP)"
@@ -10272,14 +9761,12 @@ msgstr "自動 IP (BOOTP/DHCP/Zeroconf)"
 msgid "Protocol for the rest of the world"
 msgstr "其他世界的的通訊協定"
 
-#: network/netconnect.pm:88
-#: standalone/drakconnect:563
+#: network/netconnect.pm:88 standalone/drakconnect:563
 #, c-format
 msgid "European protocol (EDSS1)"
 msgstr "歐洲人的通訊協定 (EDSS1)"
 
-#: network/netconnect.pm:89
-#: standalone/drakconnect:564
+#: network/netconnect.pm:89 standalone/drakconnect:564
 #, c-format
 msgid ""
 "Protocol for the rest of the world\n"
@@ -10288,8 +9775,7 @@ msgstr ""
 "其他世界的通訊協定\n"
 "無 D-Channel (leased lines)"
 
-#: network/netconnect.pm:115
-#: network/thirdparty.pm:184
+#: network/netconnect.pm:115 network/thirdparty.pm:197
 #, c-format
 msgid "Alcatel speedtouch USB modem"
 msgstr "Alcatel speedtouch USB 數據機"
@@ -10369,38 +9855,32 @@ msgstr ""
 msgid "PPPoA VC"
 msgstr ""
 
-#: network/netconnect.pm:140
-#: standalone/drakconnect:498
+#: network/netconnect.pm:140 standalone/drakconnect:498
 #, c-format
 msgid "Script-based"
 msgstr "Script-based"
 
-#: network/netconnect.pm:141
-#: standalone/drakconnect:498
+#: network/netconnect.pm:141 standalone/drakconnect:498
 #, c-format
 msgid "PAP"
 msgstr "PAP"
 
-#: network/netconnect.pm:142
-#: standalone/drakconnect:498
+#: network/netconnect.pm:142 standalone/drakconnect:498
 #, c-format
 msgid "Terminal-based"
 msgstr "Terminal-based"
 
-#: network/netconnect.pm:143
-#: standalone/drakconnect:498
+#: network/netconnect.pm:143 standalone/drakconnect:498
 #, c-format
 msgid "CHAP"
 msgstr "CHAP"
 
-#: network/netconnect.pm:144
-#: standalone/drakconnect:498
+#: network/netconnect.pm:144 standalone/drakconnect:498
 #, c-format
 msgid "PAP/CHAP"
 msgstr "PAP/CHAP"
 
-#: network/netconnect.pm:234
-#: standalone/drakconnect:56
+#: network/netconnect.pm:234 standalone/drakconnect:56
 #, c-format
 msgid "Network & Internet Configuration"
 msgstr "網路 & 網際網路設定"
@@ -10410,11 +9890,8 @@ msgstr "網路 & 網際網路設定"
 msgid "LAN connection"
 msgstr "區域網路連線"
 
-#: network/netconnect.pm:241
-#: network/netconnect.pm:260
-#: standalone/drakroam:140
-#: standalone/drakroam:158
-#: standalone/drakroam:161
+#: network/netconnect.pm:241 network/netconnect.pm:260 standalone/drakroam:140
+#: standalone/drakroam:158 standalone/drakroam:161
 #, c-format
 msgid "Wireless connection"
 msgstr "無線網路連線"
@@ -10449,14 +9926,12 @@ msgstr ""
 msgid "Choose the connection you want to configure"
 msgstr "選擇您要設定的連線項目"
 
-#: network/netconnect.pm:271
-#: network/netconnect.pm:759
+#: network/netconnect.pm:271 network/netconnect.pm:759
 #, c-format
 msgid "Connection Configuration"
 msgstr "連線組態設定"
 
-#: network/netconnect.pm:271
-#: network/netconnect.pm:760
+#: network/netconnect.pm:271 network/netconnect.pm:760
 #, c-format
 msgid "Please fill or check the field below"
 msgstr "請您填入或檢查下面欄位"
@@ -10466,14 +9941,12 @@ msgstr "請您填入或檢查下面欄位"
 msgid "Your personal phone number"
 msgstr "您的個人電話號碼"
 
-#: network/netconnect.pm:275
-#: network/netconnect.pm:763
+#: network/netconnect.pm:275 network/netconnect.pm:763
 #, c-format
 msgid "Provider name (ex provider.net)"
 msgstr "提供者的名稱 (ex provider.net)"
 
-#: network/netconnect.pm:276
-#: standalone/drakconnect:493
+#: network/netconnect.pm:276 standalone/drakconnect:493
 #, c-format
 msgid "Provider phone number"
 msgstr "提供者的電話號碼"
@@ -10488,61 +9961,50 @@ msgstr "提供者 DNS 1 (選擇性輸入)"
 msgid "Provider DNS 2 (optional)"
 msgstr "提供者 DNS 2 (選擇性輸入)"
 
-#: network/netconnect.pm:279
-#: standalone/drakconnect:444
+#: network/netconnect.pm:279 standalone/drakconnect:444
 #, c-format
 msgid "Dialing mode"
 msgstr "撥接的模式"
 
-#: network/netconnect.pm:280
-#: standalone/drakconnect:449
+#: network/netconnect.pm:280 standalone/drakconnect:449
 #: standalone/drakconnect:517
 #, c-format
 msgid "Connection speed"
 msgstr "連線速度"
 
-#: network/netconnect.pm:281
-#: standalone/drakconnect:454
+#: network/netconnect.pm:281 standalone/drakconnect:454
 #, c-format
 msgid "Connection timeout (in sec)"
 msgstr "連線逾時 (以秒為單位)"
 
-#: network/netconnect.pm:282
-#: network/netconnect.pm:307
-#: network/netconnect.pm:766
-#: standalone/drakconnect:491
+#: network/netconnect.pm:282 network/netconnect.pm:307
+#: network/netconnect.pm:766 standalone/drakconnect:491
 #, c-format
 msgid "Account Login (user name)"
 msgstr "帳號登入 (使用者名稱)"
 
-#: network/netconnect.pm:283
-#: network/netconnect.pm:308
-#: network/netconnect.pm:767
-#: standalone/drakconnect:492
+#: network/netconnect.pm:283 network/netconnect.pm:308
+#: network/netconnect.pm:767 standalone/drakconnect:492
 #, c-format
 msgid "Account Password"
 msgstr "帳號的密碼"
 
-#: network/netconnect.pm:284
-#: standalone/drakconnect:554
+#: network/netconnect.pm:284 standalone/drakconnect:554
 #, c-format
 msgid "Card IRQ"
 msgstr "卡的 IRQ"
 
-#: network/netconnect.pm:285
-#: standalone/drakconnect:555
+#: network/netconnect.pm:285 standalone/drakconnect:555
 #, c-format
 msgid "Card mem (DMA)"
 msgstr "卡的 mem (DMA)"
 
-#: network/netconnect.pm:286
-#: standalone/drakconnect:556
+#: network/netconnect.pm:286 standalone/drakconnect:556
 #, c-format
 msgid "Card IO"
 msgstr "卡的 IO"
 
-#: network/netconnect.pm:287
-#: standalone/drakconnect:557
+#: network/netconnect.pm:287 standalone/drakconnect:557
 #, c-format
 msgid "Card IO_0"
 msgstr "卡的 IO_0"
@@ -10562,40 +10024,31 @@ msgstr "Cable：帳號選項"
 msgid "Use BPALogin (needed for Telstra)"
 msgstr ""
 
-#: network/netconnect.pm:332
-#: network/netconnect.pm:649
-#: network/netconnect.pm:798
-#: network/netconnect.pm:1111
+#: network/netconnect.pm:332 network/netconnect.pm:649
+#: network/netconnect.pm:798 network/netconnect.pm:1112
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "選取要設定的網路介面："
 
-#: network/netconnect.pm:334
-#: network/netconnect.pm:369
-#: network/netconnect.pm:650
-#: network/netconnect.pm:800
-#: network/shorewall.pm:65
+#: network/netconnect.pm:334 network/netconnect.pm:369
+#: network/netconnect.pm:650 network/netconnect.pm:800 network/shorewall.pm:65
 #: standalone/drakconnect:713
 #, c-format
 msgid "Net Device"
 msgstr "網路裝置"
 
-#: network/netconnect.pm:335
-#: network/netconnect.pm:340
+#: network/netconnect.pm:335 network/netconnect.pm:340
 #, c-format
 msgid "External ISDN modem"
 msgstr "外接式 ISDN 數據機"
 
-#: network/netconnect.pm:368
-#: standalone/harddrake2:216
+#: network/netconnect.pm:368 standalone/harddrake2:216
 #, c-format
 msgid "Select a device!"
 msgstr "選取一個裝置！"
 
-#: network/netconnect.pm:377
-#: network/netconnect.pm:387
-#: network/netconnect.pm:397
-#: network/netconnect.pm:430
+#: network/netconnect.pm:377 network/netconnect.pm:387
+#: network/netconnect.pm:397 network/netconnect.pm:430
 #: network/netconnect.pm:444
 #, c-format
 msgid "ISDN Configuration"
@@ -10612,7 +10065,8 @@ msgid ""
 "\n"
 "If you have an ISA card, the values on the next screen should be right.\n"
 "\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
 msgstr ""
 "\n"
 "如果您使用的是 ISA 卡，下一個螢幕所顯示的數值應該是正確的。\n"
@@ -10636,12 +10090,13 @@ msgstr "下列何者是您的 ISDN 卡?"
 
 #: network/netconnect.pm:416
 #, c-format
-msgid "A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?"
+msgid ""
+"A CAPI driver is available for this modem. This CAPI driver can offer more "
+"capabilities than the free driver (like sending faxes). Which driver do you "
+"want to use?"
 msgstr ""
 
-#: network/netconnect.pm:418
-#: standalone/drakconnect:109
-#: standalone/drakups:251
+#: network/netconnect.pm:418 standalone/drakconnect:109 standalone/drakups:251
 #: standalone/harddrake2:133
 #, c-format
 msgid "Driver"
@@ -10652,12 +10107,9 @@ msgstr "驅動程式"
 msgid "Which protocol do you want to use?"
 msgstr "您要使用那個通訊協定?"
 
-#: network/netconnect.pm:432
-#: standalone/drakconnect:109
-#: standalone/drakconnect:300
-#: standalone/drakconnect:562
-#: standalone/drakids:196
-#: standalone/drakvpn:1128
+#: network/netconnect.pm:432 standalone/drakconnect:109
+#: standalone/drakconnect:300 standalone/drakconnect:562
+#: standalone/drakids:196 standalone/drakvpn:1128
 #, c-format
 msgid "Protocol"
 msgstr "通訊協定"
@@ -10671,8 +10123,7 @@ msgstr ""
 "選擇您的提供者.\n"
 "如果並沒有包含在清單內, 請選則未列在清單內(Unlisted)."
 
-#: network/netconnect.pm:446
-#: network/netconnect.pm:535
+#: network/netconnect.pm:446 network/netconnect.pm:535
 #: network/netconnect.pm:681
 #, c-format
 msgid "Provider:"
@@ -10722,8 +10173,7 @@ msgstr "電話號碼"
 msgid "Login ID"
 msgstr "登入的 ID"
 
-#: network/netconnect.pm:577
-#: network/netconnect.pm:610
+#: network/netconnect.pm:577 network/netconnect.pm:610
 #, c-format
 msgid "Dialup: IP parameters"
 msgstr "撥號: IP 參數"
@@ -10733,15 +10183,10 @@ msgstr "撥號: IP 參數"
 msgid "IP parameters"
 msgstr "IP 參數"
 
-#: network/netconnect.pm:581
-#: network/netconnect.pm:884
-#: printer/printerdrake.pm:460
-#: standalone/drakconnect:109
-#: standalone/drakconnect:316
-#: standalone/drakconnect:882
-#: standalone/drakhosts:197
-#: standalone/drakroam:114
-#: standalone/drakups:286
+#: network/netconnect.pm:581 network/netconnect.pm:884
+#: printer/printerdrake.pm:460 standalone/drakconnect:109
+#: standalone/drakconnect:316 standalone/drakconnect:882
+#: standalone/drakhosts:197 standalone/drakroam:114 standalone/drakups:286
 #, c-format
 msgid "IP address"
 msgstr "IP 位址"
@@ -10766,15 +10211,13 @@ msgstr "DNS"
 msgid "Domain name"
 msgstr "網域名稱"
 
-#: network/netconnect.pm:599
-#: network/netconnect.pm:764
+#: network/netconnect.pm:599 network/netconnect.pm:764
 #: standalone/drakconnect:992
 #, c-format
 msgid "First DNS Server (optional)"
 msgstr "第一台 DNS 伺服器 (選擇性輸入)"
 
-#: network/netconnect.pm:600
-#: network/netconnect.pm:765
+#: network/netconnect.pm:600 network/netconnect.pm:765
 #: standalone/drakconnect:993
 #, c-format
 msgid "Second DNS Server (optional)"
@@ -10785,14 +10228,12 @@ msgstr "第二台 DNS 伺服器 (選擇性輸入)"
 msgid "Set hostname from IP"
 msgstr "由 IP 設定主機名稱"
 
-#: network/netconnect.pm:613
-#: standalone/drakconnect:327
+#: network/netconnect.pm:613 standalone/drakconnect:327
 #, c-format
 msgid "Gateway"
 msgstr "閘道"
 
-#: network/netconnect.pm:614
-#: standalone/drakroam:116
+#: network/netconnect.pm:614 standalone/drakroam:116
 #, c-format
 msgid "Gateway IP address"
 msgstr "閘道 IP 位址"
@@ -10849,15 +10290,16 @@ msgstr "使用 Windows 驅動程式 (藉由 ndiswrapper)"
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf 主機名稱解析"
 
-#: network/netconnect.pm:841
-#: network/netconnect.pm:871
+#: network/netconnect.pm:841 network/netconnect.pm:871
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "正在設定網路裝置 %s (驅動程式 %s)"
 
 #: network/netconnect.pm:842
 #, c-format
-msgid "The following protocols can be used to configure a LAN connection. Please choose the one you want to use"
+msgid ""
+"The following protocols can be used to configure a LAN connection. Please "
+"choose the one you want to use"
 msgstr ""
 
 #: network/netconnect.pm:872
@@ -10871,46 +10313,38 @@ msgstr ""
 "每個項目都應該用小數點間隔的 IP 位址來輸入\n"
 "(例如 1.2.3.4)。"
 
-#: network/netconnect.pm:879
-#: standalone/drakconnect:373
+#: network/netconnect.pm:879 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "由 DHCP 位址指派主機名稱"
 
-#: network/netconnect.pm:880
-#: standalone/drakconnect:375
+#: network/netconnect.pm:880 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP 主機名稱"
 
-#: network/netconnect.pm:885
-#: standalone/drakconnect:321
-#: standalone/drakconnect:883
-#: standalone/drakgw:181
+#: network/netconnect.pm:885 standalone/drakconnect:321
+#: standalone/drakconnect:883 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "網路遮罩"
 
-#: network/netconnect.pm:887
-#: standalone/drakconnect:437
+#: network/netconnect.pm:887 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "紀錄網路卡的 ID (對於筆記型電腦相當有用)"
 
-#: network/netconnect.pm:888
-#: standalone/drakconnect:438
+#: network/netconnect.pm:888 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "網路熱插拔"
 
-#: network/netconnect.pm:890
-#: standalone/drakconnect:432
+#: network/netconnect.pm:890 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "於開機時啟動"
 
-#: network/netconnect.pm:892
-#: standalone/drakconnect:460
+#: network/netconnect.pm:892 standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "公制"
@@ -10920,46 +10354,39 @@ msgstr "公制"
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr ""
 
-#: network/netconnect.pm:895
-#: standalone/drakconnect:369
+#: network/netconnect.pm:895 standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP 用戶端"
 
-#: network/netconnect.pm:897
-#: standalone/drakconnect:379
+#: network/netconnect.pm:897 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP 連線逾時 (以秒為單位)"
 
-#: network/netconnect.pm:898
-#: standalone/drakconnect:382
+#: network/netconnect.pm:898 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "由 DHCP 取得 DNS 主機"
 
-#: network/netconnect.pm:899
-#: standalone/drakconnect:383
+#: network/netconnect.pm:899 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "由 DHCP 取得 YP 伺服器"
 
-#: network/netconnect.pm:900
-#: standalone/drakconnect:384
+#: network/netconnect.pm:900 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "由 DHCP 取得 NTPD 伺服器"
 
-#: network/netconnect.pm:908
-#: printer/printerdrake.pm:1897
+#: network/netconnect.pm:908 printer/printerdrake.pm:1897
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 位址應該是 1.2.3.4 這類的格式"
 
-#: network/netconnect.pm:912
-#: standalone/drakconnect:680
+#: network/netconnect.pm:912 standalone/drakconnect:680
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "網路遮罩應該是 255.255.224.0 這類的格式"
@@ -10969,10 +10396,8 @@ msgstr "網路遮罩應該是 255.255.224.0 這類的格式"
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "警告：IP 位址 %s 通常是保留下來的！"
 
-#: network/netconnect.pm:921
-#: standalone/drakTermServ:1852
-#: standalone/drakTermServ:1853
-#: standalone/drakTermServ:1854
+#: network/netconnect.pm:921 standalone/drakTermServ:1852
+#: standalone/drakTermServ:1853 standalone/drakTermServ:1854
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s 已經在使用中了\n"
@@ -11002,8 +10427,7 @@ msgstr ""
 msgid "Please enter the wireless parameters for this card:"
 msgstr "請輸入這張卡的無線網路參數："
 
-#: network/netconnect.pm:1007
-#: standalone/drakconnect:404
+#: network/netconnect.pm:1007 standalone/drakconnect:404
 #, c-format
 msgid "Operating Mode"
 msgstr "運作模式"
@@ -11038,15 +10462,13 @@ msgstr "第二的"
 msgid "Auto"
 msgstr "自動"
 
-#: network/netconnect.pm:1011
-#: standalone/drakconnect:405
+#: network/netconnect.pm:1011 standalone/drakconnect:405
 #: standalone/drakroam:107
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "網路名稱 (ESSID)"
 
-#: network/netconnect.pm:1012
-#: standalone/drakroam:108
+#: network/netconnect.pm:1012 standalone/drakroam:108
 #, c-format
 msgid "Encryption mode"
 msgstr ""
@@ -11056,32 +10478,27 @@ msgstr ""
 msgid "Allow access point roaming"
 msgstr ""
 
-#: network/netconnect.pm:1018
-#: standalone/drakconnect:406
+#: network/netconnect.pm:1018 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "網路 ID"
 
-#: network/netconnect.pm:1019
-#: standalone/drakconnect:407
+#: network/netconnect.pm:1019 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "工作頻率"
 
-#: network/netconnect.pm:1020
-#: standalone/drakconnect:408
+#: network/netconnect.pm:1020 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr ""
 
-#: network/netconnect.pm:1021
-#: standalone/drakconnect:409
+#: network/netconnect.pm:1021 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "連線速率 (b/s)"
 
-#: network/netconnect.pm:1022
-#: standalone/drakconnect:420
+#: network/netconnect.pm:1022 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr ""
@@ -11089,22 +10506,23 @@ msgstr ""
 #: network/netconnect.pm:1023
 #, c-format
 msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that the\n"
-"channel is clear. This adds overhead, but increase performance in case of hidden\n"
+"RTS/CTS adds a handshake before each packet transmission to make sure that "
+"the\n"
+"channel is clear. This adds overhead, but increase performance in case of "
+"hidden\n"
 "nodes or large number of active nodes. This parameter sets the size of the\n"
 "smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, fixed\n"
+"packet size disable the scheme. You may also set this parameter to auto, "
+"fixed\n"
 "or off."
 msgstr ""
 
-#: network/netconnect.pm:1030
-#: standalone/drakconnect:421
+#: network/netconnect.pm:1030 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "破碎片段"
 
-#: network/netconnect.pm:1031
-#: standalone/drakconnect:422
+#: network/netconnect.pm:1031 standalone/drakconnect:422
 #, c-format
 msgid "iwconfig command extra arguments"
 msgstr ""
@@ -11113,14 +10531,14 @@ msgstr ""
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n"
+"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
+"as the hostname).\n"
 "\n"
 "See iwconfig(8) man page for further information."
 msgstr ""
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1039
-#: standalone/drakconnect:423
+#: network/netconnect.pm:1039 standalone/drakconnect:423
 #, c-format
 msgid "iwspy command extra arguments"
 msgstr ""
@@ -11137,8 +10555,7 @@ msgid ""
 "See iwpspy(8) man page for further information."
 msgstr ""
 
-#: network/netconnect.pm:1049
-#: standalone/drakconnect:424
+#: network/netconnect.pm:1049 standalone/drakconnect:424
 #, c-format
 msgid "iwpriv command extra arguments"
 msgstr ""
@@ -11146,13 +10563,16 @@ msgstr ""
 #: network/netconnect.pm:1050
 #, c-format
 msgid ""
-"iwpriv enable to set up optionals (private) parameters of a wireless network\n"
+"iwpriv enable to set up optionals (private) parameters of a wireless "
+"network\n"
 "interface.\n"
 "\n"
-"iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
+"to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
-"In theory, the documentation of each device driver should indicate how to use\n"
+"In theory, the documentation of each device driver should indicate how to "
+"use\n"
 "those interface specific commands and their effect.\n"
 "\n"
 "See iwpriv(8) man page for further information."
@@ -11160,45 +10580,49 @@ msgstr ""
 
 #: network/netconnect.pm:1065
 #, c-format
-msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
 #: network/netconnect.pm:1069
 #, c-format
-msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: network/netconnect.pm:1111
+#: network/netconnect.pm:1112
 #, c-format
 msgid "DVB configuration"
 msgstr ""
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1113
 #, c-format
 msgid "DVB Adapter"
 msgstr ""
 
-#: network/netconnect.pm:1129
+#: network/netconnect.pm:1130
 #, c-format
 msgid "DVB adapter settings"
 msgstr ""
 
-#: network/netconnect.pm:1132
+#: network/netconnect.pm:1133
 #, c-format
 msgid "Adapter card"
 msgstr ""
 
-#: network/netconnect.pm:1133
+#: network/netconnect.pm:1134
 #, c-format
 msgid "Net demux"
 msgstr ""
 
-#: network/netconnect.pm:1134
+#: network/netconnect.pm:1135
 #, c-format
 msgid "PID"
 msgstr "PID (行程編號)"
 
-#: network/netconnect.pm:1162
+#: network/netconnect.pm:1163
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -11211,70 +10635,67 @@ msgstr ""
 "類似 ``mybox.mylab.myco.com'' 的格式.\n"
 "使用閘道器的話, 也請在這邊輸入閘道器的 IP 位址."
 
-#: network/netconnect.pm:1167
+#: network/netconnect.pm:1168
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr ""
 
-#: network/netconnect.pm:1169
-#: standalone/drakconnect:991
+#: network/netconnect.pm:1170 standalone/drakconnect:991
 #, c-format
 msgid "Host name (optional)"
 msgstr "主機名稱 (選擇性輸入)"
 
-#: network/netconnect.pm:1169
-#: standalone/drakhosts:197
+#: network/netconnect.pm:1170 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "主機名稱"
 
-#: network/netconnect.pm:1171
+#: network/netconnect.pm:1172
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS 伺服器 1"
 
-#: network/netconnect.pm:1172
+#: network/netconnect.pm:1173
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS 伺服器 2"
 
-#: network/netconnect.pm:1173
+#: network/netconnect.pm:1174
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS 伺服器 3"
 
-#: network/netconnect.pm:1174
+#: network/netconnect.pm:1175
 #, c-format
 msgid "Search domain"
 msgstr "搜尋網域"
 
-#: network/netconnect.pm:1175
+#: network/netconnect.pm:1176
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr ""
 
-#: network/netconnect.pm:1176
+#: network/netconnect.pm:1177
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "閘道器 (比方 %s)"
 
-#: network/netconnect.pm:1178
+#: network/netconnect.pm:1179
 #, c-format
 msgid "Gateway device"
 msgstr "閘道器裝置"
 
-#: network/netconnect.pm:1187
+#: network/netconnect.pm:1188
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "DNS 伺服器位址必須要用 1.2.3.4 的格式來輸入"
 
-#: network/netconnect.pm:1192
-#: standalone/drakconnect:685
+#: network/netconnect.pm:1193 standalone/drakconnect:685
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "Gateway 位址必須要用類似 1.2.3.4 的格式來輸入"
 
-#: network/netconnect.pm:1205
+#: network/netconnect.pm:1206
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -11283,68 +10704,67 @@ msgid ""
 "It is not necessary on most networks."
 msgstr ""
 
-#: network/netconnect.pm:1209
+#: network/netconnect.pm:1210
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf 主機名稱"
 
-#: network/netconnect.pm:1212
+#: network/netconnect.pm:1213
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
-#: network/netconnect.pm:1222
+#: network/netconnect.pm:1223
 #, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "您要在允許使用者啟動該連線嗎?"
 
-#: network/netconnect.pm:1235
+#: network/netconnect.pm:1236
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "您要在開機時自動啟動該連線嗎?"
 
-#: network/netconnect.pm:1250
+#: network/netconnect.pm:1251
 #, c-format
 msgid "Automatically at boot"
 msgstr "自動於開機時"
 
-#: network/netconnect.pm:1252
+#: network/netconnect.pm:1253
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr ""
 
-#: network/netconnect.pm:1254
+#: network/netconnect.pm:1255
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr ""
 
-#: network/netconnect.pm:1263
+#: network/netconnect.pm:1264
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "您想要如何撥接這個連線?"
 
-#: network/netconnect.pm:1276
+#: network/netconnect.pm:1277
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "現在您想要試著連線到 Internet 上面嗎?"
 
-#: network/netconnect.pm:1284
-#: standalone/drakconnect:1023
+#: network/netconnect.pm:1285 standalone/drakconnect:1023
 #, c-format
 msgid "Testing your connection..."
 msgstr "正在測試您的連線..."
 
-#: network/netconnect.pm:1304
+#: network/netconnect.pm:1305
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "系統現在連上 Internet 了."
 
-#: network/netconnect.pm:1305
+#: network/netconnect.pm:1306
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "因為安全因素考量, 它現在將會被切斷連線."
 
-#: network/netconnect.pm:1306
+#: network/netconnect.pm:1307
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -11353,7 +10773,7 @@ msgstr ""
 "系統目前看起來似乎並沒有連上 Internet.\n"
 "請嘗試重新設定您的連線."
 
-#: network/netconnect.pm:1321
+#: network/netconnect.pm:1322
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -11362,59 +10782,65 @@ msgstr ""
 "恭喜！網路與網際網路組態已經設定完成了。\n"
 "\n"
 
-#: network/netconnect.pm:1324
+#: network/netconnect.pm:1325
 #, c-format
-msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
 "在完成這個項目後, 我們建議您重新啟動您的 X 環境\n"
 "以避免因為您調整了主機名稱造成 X 的問題."
 
-#: network/netconnect.pm:1325
+#: network/netconnect.pm:1326
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration."
+"Test your connection via net_monitor or mcc. If your connection does not "
+"work, you might want to relaunch the configuration."
 msgstr ""
 "設定時發生問題.\n"
-"以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或許需要重新再進行設定."
+"以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或"
+"許需要重新再進行設定."
 
-#: network/netconnect.pm:1336
+#: network/netconnect.pm:1337
 #, c-format
 msgid "(detected on port %s)"
 msgstr "(於 port %s 被偵測到)"
 
 #. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:1338
+#: network/netconnect.pm:1339
 #, c-format
 msgid "(detected %s)"
 msgstr "(偵測到 %s)"
 
-#: network/netconnect.pm:1338
+#: network/netconnect.pm:1339
 #, c-format
 msgid "(detected)"
 msgstr "(被偵測到)"
 
-#: network/netconnect.pm:1339
+#: network/netconnect.pm:1340
 #, c-format
 msgid "Network Configuration"
 msgstr "網路設定"
 
-#: network/netconnect.pm:1340
+#: network/netconnect.pm:1341
 #, c-format
 msgid ""
-"Because you are doing a network installation, your network is already configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n"
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
 msgstr ""
 "因為您是透過網路安裝, 所以您的網路組態已經設定過了.\n"
 "您可以點選確定 Ok 保留您的設定組態, 或者是選取取消 cancel\n"
 "來重新設定網路 & 網際網路連線.\n"
 
-#: network/netconnect.pm:1343
+#: network/netconnect.pm:1344
 #, c-format
 msgid "The network needs to be restarted. Do you want to restart it?"
 msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?"
 
-#: network/netconnect.pm:1344
+#: network/netconnect.pm:1345
 #, c-format
 msgid ""
 "A problem occurred while restarting the network: \n"
@@ -11425,7 +10851,7 @@ msgstr ""
 "\n"
 "%s"
 
-#: network/netconnect.pm:1345
+#: network/netconnect.pm:1346
 #, c-format
 msgid ""
 "We are now going to configure the %s connection.\n"
@@ -11438,12 +10864,12 @@ msgstr ""
 "\n"
 "按 \"%s\" 繼續."
 
-#: network/netconnect.pm:1346
+#: network/netconnect.pm:1347
 #, c-format
 msgid "Configuration is complete, do you want to apply settings?"
 msgstr "設定完成, 您想要套用設定值?"
 
-#: network/netconnect.pm:1347
+#: network/netconnect.pm:1348
 #, c-format
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
@@ -11454,12 +10880,12 @@ msgstr ""
 "請您選擇其中一個要使用的項目.\n"
 "\n"
 
-#: network/netconnect.pm:1348
+#: network/netconnect.pm:1349
 #, c-format
 msgid "Internet connection"
 msgstr "Internet 連線"
 
-#: network/netconnect.pm:1365
+#: network/netconnect.pm:1366
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -11468,8 +10894,7 @@ msgstr ""
 "發生了一個沒有預料到的錯誤：\n"
 "%s"
 
-#: network/network.pm:401
-#: network/network.pm:402
+#: network/network.pm:401 network/network.pm:402
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理伺服器設定"
@@ -11505,67 +10930,72 @@ msgid ""
 "\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: network/thirdparty.pm:196
+#: network/thirdparty.pm:209
 #, c-format
 msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
 msgstr "將 Alcatel 的微碼複製為 mgmt.o 並置於 /usr/share/speedtouch/"
 
-#: network/thirdparty.pm:205
+#: network/thirdparty.pm:218
 #, c-format
 msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.\n"
+"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
+"problem.\n"
 "\n"
 "You can find a driver on http://eciadsl.flashtux.org/"
 msgstr ""
 
-#: network/thirdparty.pm:266
+#: network/thirdparty.pm:291
 #, c-format
 msgid "Could not install the packages (%s)!"
 msgstr "無法安裝套件 (%s)！"
 
-#: network/thirdparty.pm:274
+#: network/thirdparty.pm:299
 #, c-format
 msgid "Some packages (%s) are required but aren't available."
 msgstr ""
 
-#: network/thirdparty.pm:275
+#: network/thirdparty.pm:300
 #, c-format
-msgid "These packages can be found in Mandriva Club or in Mandriva commercial releases."
+msgid ""
+"These packages can be found in Mandriva Club or in Mandriva commercial "
+"releases."
 msgstr ""
 
-#: network/thirdparty.pm:276
+#: network/thirdparty.pm:301
 #, c-format
 msgid ""
 "The required files can also be installed from this URL:\n"
 "%s"
 msgstr ""
 
-#: network/thirdparty.pm:309
+#: network/thirdparty.pm:334
 #, c-format
 msgid "Unable to find \"%s\" on your Windows system!"
 msgstr "無法從您的 Windows 系統找到 \"%s\"!"
 
-#: network/thirdparty.pm:311
+#: network/thirdparty.pm:336
 #, c-format
 msgid "No Windows system has been detected!"
 msgstr ""
 
-#: network/thirdparty.pm:321
+#: network/thirdparty.pm:346
 #, c-format
 msgid "Insert floppy"
 msgstr "插入軟片"
 
-#: network/thirdparty.pm:322
+#: network/thirdparty.pm:347
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s"
+msgid ""
+"Insert a FAT formatted floppy in drive %s with %s in root directory and "
+"press %s"
 msgstr "插入一張 FAT 格式化的軟片於磁碟 %s 跟著 %s 於 root 目錄下然後按下 %s"
 
-#: network/thirdparty.pm:332
+#: network/thirdparty.pm:357
 #, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "軟片存取錯誤, 無法掛載裝置 %s"
 
-#: network/thirdparty.pm:342
+#: network/thirdparty.pm:367
 #, c-format
 msgid ""
 "You need the Alcatel microcode.\n"
@@ -11575,41 +11005,38 @@ msgstr ""
 "您需要 Alcatel 的微碼。\n"
 "您可以立即由磁碟片或 Windows 磁區安裝，或者先跳過等日後再執行。"
 
-#: network/thirdparty.pm:346
-#: network/thirdparty.pm:348
+#: network/thirdparty.pm:371 network/thirdparty.pm:373
 #, c-format
 msgid "Use a floppy"
 msgstr "由磁片安裝"
 
-#: network/thirdparty.pm:346
+#: network/thirdparty.pm:371
 #, c-format
 msgid "Use my Windows partition"
 msgstr "由我的 Windows 磁區安裝"
 
-#: network/thirdparty.pm:356
+#: network/thirdparty.pm:381
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr "韌體複製失敗，找不到檔案 %s"
 
-#: network/thirdparty.pm:361
-#: standalone/drakautoinst:250
-#: standalone/drakvpn:888
-#: standalone/scannerdrake:405
+#: network/thirdparty.pm:386 standalone/drakautoinst:250
+#: standalone/drakvpn:888 standalone/scannerdrake:405
 #, c-format
 msgid "Congratulations!"
 msgstr "恭喜!!"
 
-#: network/thirdparty.pm:361
+#: network/thirdparty.pm:386
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr "韌體複製成功"
 
-#: network/thirdparty.pm:426
+#: network/thirdparty.pm:451
 #, c-format
 msgid "Looking for required software and drivers..."
 msgstr ""
 
-#: network/thirdparty.pm:436
+#: network/thirdparty.pm:460
 #, c-format
 msgid "Please wait, running device configuration commands..."
 msgstr "請稍候，正在執行設定裝置的指令..."
@@ -11643,7 +11070,8 @@ msgstr "這個平台並不支援延伸分割區"
 #, c-format
 msgid ""
 "You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next to the extended partitions."
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
 "您的硬碟分割表中有一個空洞, 我無法使用\n"
 "唯一的解決方法是將您的主分割區的位置搬移, 讓這些空洞與延伸分割區相鄰."
@@ -11668,7 +11096,8 @@ msgstr "寫入檔案 %s 時發生錯誤"
 msgid ""
 "Something bad is happening on your drive. \n"
 "A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted data."
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
 msgstr ""
 "您的磁碟發生了一個嚴重的錯誤.\n"
 "資料完整性檢測已經失敗了.\n"
@@ -11704,86 +11133,80 @@ msgstr "或許"
 msgid "Downloading file %s..."
 msgstr "正在下載檔案 %s..."
 
-#: printer/cups.pm:103
+#: printer/cups.pm:105
 #, c-format
 msgid "(on %s)"
 msgstr "(於 %s)"
 
-#: printer/cups.pm:103
+#: printer/cups.pm:105
 #, c-format
 msgid "(on this machine)"
 msgstr "(位於這個機器上)"
 
-#: printer/cups.pm:115
-#: standalone/printerdrake:200
+#: printer/cups.pm:117 standalone/printerdrake:200
 #, c-format
 msgid "Configured on other machines"
 msgstr "於其他機器上被設定"
 
-#: printer/cups.pm:117
+#: printer/cups.pm:119
 #, c-format
 msgid "On CUPS server \"%s\""
 msgstr "位於 CUPS 伺服器 \"%s\""
 
-#: printer/cups.pm:117
-#: printer/printerdrake.pm:5055
-#: printer/printerdrake.pm:5065
-#: printer/printerdrake.pm:5210
-#: printer/printerdrake.pm:5221
-#: printer/printerdrake.pm:5434
+#: printer/cups.pm:119 printer/printerdrake.pm:5064
+#: printer/printerdrake.pm:5074 printer/printerdrake.pm:5233
+#: printer/printerdrake.pm:5244 printer/printerdrake.pm:5458
 #, c-format
 msgid " (Default)"
 msgstr " (預設開機)"
 
-#: printer/data.pm:59
+#: printer/data.pm:67
 #, c-format
 msgid "PDQ - Print, Do not Queue"
 msgstr "PDQ - Print, Do not Queue"
 
-#: printer/data.pm:60
+#: printer/data.pm:68
 #, c-format
 msgid "PDQ"
 msgstr "PDQ"
 
-#: printer/data.pm:72
+#: printer/data.pm:80
 #, c-format
 msgid "LPD - Line Printer Daemon"
 msgstr "LPD - Line Printer Daemon"
 
-#: printer/data.pm:73
+#: printer/data.pm:81
 #, c-format
 msgid "LPD"
 msgstr "LPD"
 
-#: printer/data.pm:94
+#: printer/data.pm:102
 #, c-format
 msgid "LPRng - LPR New Generation"
 msgstr "LPRng - LPR New Generation"
 
-#: printer/data.pm:95
+#: printer/data.pm:103
 #, c-format
 msgid "LPRng"
 msgstr "LPRng"
 
-#: printer/data.pm:120
+#: printer/data.pm:128
 #, c-format
 msgid "CUPS - Common Unix Printing System"
 msgstr "CUPS - 通用 Unix 列印系統"
 
-#: printer/data.pm:151
+#: printer/data.pm:158
 #, c-format
 msgid "CUPS - Common Unix Printing System (remote server)"
 msgstr "CUPS - 通用 Unix 列印系統 (遠端伺服器)"
 
-#: printer/data.pm:152
+#: printer/data.pm:159
 #, c-format
 msgid "Remote CUPS"
 msgstr "遠端 CUPS"
 
-#: printer/detect.pm:166
-#: printer/detect.pm:250
-#: printer/detect.pm:452
-#: printer/detect.pm:489
+#: printer/detect.pm:166 printer/detect.pm:250 printer/detect.pm:485
+#: printer/detect.pm:558
 #, c-format
 msgid "Unknown Model"
 msgstr "未知的型號"
@@ -11803,8 +11226,7 @@ msgstr "遠端印表機"
 msgid "Printer on remote CUPS server"
 msgstr "遠端的 CUPS 伺服器印表機"
 
-#: printer/main.pm:30
-#: printer/printerdrake.pm:1373
+#: printer/main.pm:30 printer/printerdrake.pm:1373
 #: printer/printerdrake.pm:1920
 #, c-format
 msgid "Printer on remote lpd server"
@@ -11825,8 +11247,7 @@ msgstr "SMB/Windows 伺服器印表機"
 msgid "Printer on NetWare server"
 msgstr "Netware 伺服器印表機"
 
-#: printer/main.pm:34
-#: printer/printerdrake.pm:1924
+#: printer/main.pm:34 printer/printerdrake.pm:1924
 #, c-format
 msgid "Enter a printer device URI"
 msgstr "輸入印表機裝置的 URI"
@@ -11841,33 +11262,25 @@ msgstr "使用 Pipe 管線工作到一個指令"
 msgid "recommended"
 msgstr "建議使用"
 
-#: printer/main.pm:330
-#: printer/main.pm:690
-#: printer/main.pm:1805
-#: printer/main.pm:2973
-#: printer/main.pm:2982
-#: printer/printerdrake.pm:973
-#: printer/printerdrake.pm:1133
-#: printer/printerdrake.pm:2412
-#: printer/printerdrake.pm:5471
+#: printer/main.pm:330 printer/main.pm:690 printer/main.pm:1808
+#: printer/main.pm:2981 printer/main.pm:2990 printer/printerdrake.pm:973
+#: printer/printerdrake.pm:1133 printer/printerdrake.pm:2408
+#: printer/printerdrake.pm:5495
 #, c-format
 msgid "Unknown model"
 msgstr "未知的型號"
 
-#: printer/main.pm:355
-#: standalone/printerdrake:199
+#: printer/main.pm:355 standalone/printerdrake:199
 #, c-format
 msgid "Configured on this machine"
 msgstr "於本機上被設定"
 
-#: printer/main.pm:361
-#: printer/printerdrake.pm:1463
+#: printer/main.pm:361 printer/printerdrake.pm:1463
 #, c-format
 msgid " on parallel port #%s"
 msgstr "於並列埠上 #%s"
 
-#: printer/main.pm:364
-#: printer/printerdrake.pm:1466
+#: printer/main.pm:364 printer/printerdrake.pm:1466
 #, c-format
 msgid ", USB printer #%s"
 msgstr "，USB 印表機  #%s"
@@ -11957,10 +11370,8 @@ msgstr "，使用指令 %s"
 msgid "Parallel port #%s"
 msgstr "於並列埠 #%s"
 
-#: printer/main.pm:432
-#: printer/printerdrake.pm:1484
-#: printer/printerdrake.pm:1511
-#: printer/printerdrake.pm:1529
+#: printer/main.pm:432 printer/printerdrake.pm:1484
+#: printer/printerdrake.pm:1511 printer/printerdrake.pm:1529
 #, c-format
 msgid "USB printer #%s"
 msgstr "USB 印表機 #%s"
@@ -12050,45 +11461,54 @@ msgstr "使用指令 %s"
 msgid "URI: %s"
 msgstr "URI：%s"
 
-#: printer/main.pm:687
-#: printer/printerdrake.pm:1060
-#: printer/printerdrake.pm:3227
+#: printer/main.pm:687 printer/printerdrake.pm:1060
+#: printer/printerdrake.pm:3232
 #, c-format
 msgid "Raw printer (No driver)"
 msgstr "Raw 印表機 (沒有驅動程式)"
 
-#: printer/main.pm:1304
-#: printer/printerdrake.pm:211
+#: printer/main.pm:1307 printer/printerdrake.pm:211
 #: printer/printerdrake.pm:223
 #, c-format
 msgid "Local network(s)"
 msgstr "本地端網路"
 
-#: printer/main.pm:1306
-#: printer/printerdrake.pm:227
+#: printer/main.pm:1309 printer/printerdrake.pm:227
 #, c-format
 msgid "Interface \"%s\""
 msgstr "介面 \"%s\""
 
-#: printer/main.pm:1308
+#: printer/main.pm:1311
 #, c-format
 msgid "Network %s"
 msgstr "網路 %s"
 
-#: printer/main.pm:1310
+#: printer/main.pm:1313
 #, c-format
 msgid "Host %s"
 msgstr "主機 %s"
 
-#: printer/main.pm:1339
+#: printer/main.pm:1342
 #, c-format
 msgid "%s (Port %s)"
 msgstr "%s (連接埠 %s)"
 
 #: printer/printerdrake.pm:24
 #, c-format
-msgid "The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n"
-msgstr "HP LaserJet 1000 啟動電源後需要下載它的韌體檔。請由 HP 的網站下載給 Windows 使用的驅動程式 (印表機光碟中的韌體檔無法工作) 並使用 'unzip' 工具解開 '.exe' 的自動解壓檔，然後尋找一個名為 'sihp1000.img' 的韌體檔。複製這個檔案到 '/etc/printer' 目錄下。這裡它將會被自動上傳 script 找到，並在印表機連接上電腦並啟動電源後自動上傳。\n"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
+msgstr ""
+"HP LaserJet 1000 啟動電源後需要下載它的韌體檔。請由 HP 的網站下載給 Windows "
+"使用的驅動程式 (印表機光碟中的韌體檔無法工作) 並使用 'unzip' 工具解開 '.exe' "
+"的自動解壓檔，然後尋找一個名為 'sihp1000.img' 的韌體檔。複製這個檔案到 '/etc/"
+"printer' 目錄下。這裡它將會被自動上傳 script 找到，並在印表機連接上電腦並啟動"
+"電源後自動上傳。\n"
 
 #: printer/printerdrake.pm:67
 #, c-format
@@ -12097,12 +11517,16 @@ msgstr "CUPS 印表機設定"
 
 #: printer/printerdrake.pm:68
 #, c-format
-msgid "Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines."
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessible by remote machines and by which remote machines."
 msgstr ""
 
 #: printer/printerdrake.pm:69
 #, c-format
-msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine."
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
 msgstr ""
 
 #: printer/printerdrake.pm:72
@@ -12125,8 +11549,7 @@ msgstr "印表機分享於主機/網路："
 msgid "Custom configuration"
 msgstr "客製化設定"
 
-#: printer/printerdrake.pm:89
-#: standalone/scannerdrake:593
+#: printer/printerdrake.pm:89 standalone/scannerdrake:593
 #: standalone/scannerdrake:610
 #, c-format
 msgid "No remote machines"
@@ -12139,7 +11562,15 @@ msgstr "附加的 CUPS 伺服器:"
 
 #: printer/printerdrake.pm:107
 #, c-format
-msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
 msgstr ""
 
 #: printer/printerdrake.pm:115
@@ -12149,7 +11580,14 @@ msgstr "日本字列印模式"
 
 #: printer/printerdrake.pm:116
 #, c-format
-msgid "Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."
+msgid ""
+"Turning on this allows to print plain text files in Japanese language. Only "
+"use this function if you really want to print text in Japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print Japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
 
 #: printer/printerdrake.pm:123
@@ -12160,20 +11598,22 @@ msgstr "自動化更正 CPUS 設定"
 #: printer/printerdrake.pm:125
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
 "\n"
 "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
 "\n"
 "- if /etc/cups/cupsd.conf is missing, it will be created\n"
 "\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
 msgstr ""
 
-#: printer/printerdrake.pm:138
-#: printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4688
+#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
+#: printer/printerdrake.pm:4697
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
 msgstr ""
@@ -12183,28 +11623,31 @@ msgstr ""
 msgid "On"
 msgstr "開"
 
-#: printer/printerdrake.pm:143
-#: printer/printerdrake.pm:498
+#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
 #: printer/printerdrake.pm:525
 #, c-format
 msgid "Off"
 msgstr "關"
 
-#: printer/printerdrake.pm:144
-#: printer/printerdrake.pm:507
+#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
 #, c-format
-msgid "In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
+msgid ""
+"In this mode the local CUPS daemon will be stopped and all printing requests "
+"go directly to the server specified below. Note that it is not possible to "
+"define local print queues then and if the specified server is down it cannot "
+"be printed at all from this machine."
 msgstr ""
 
-#: printer/printerdrake.pm:161
-#: printer/printerdrake.pm:236
+#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
 #, c-format
 msgid "Sharing of local printers"
 msgstr "本地端印表機分享"
 
 #: printer/printerdrake.pm:162
 #, c-format
-msgid "These are the machines and networks on which the locally connected printer(s) should be available:"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
 
 #: printer/printerdrake.pm:173
@@ -12222,19 +11665,18 @@ msgstr "編輯選取的主機/網路"
 msgid "Remove selected host/network"
 msgstr "移除選取的主機/網路"
 
-#: printer/printerdrake.pm:219
-#: printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241
-#: printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279
-#: printer/printerdrake.pm:297
+#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
+#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
+#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
 #, c-format
 msgid "IP address of host/network:"
 msgstr "主機/網路的IP 位址"
 
 #: printer/printerdrake.pm:237
 #, c-format
-msgid "Choose the network or host on which the local printers should be made available:"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
 msgstr ""
 
 #: printer/printerdrake.pm:244
@@ -12247,8 +11689,7 @@ msgstr "主機/網路 IP 位址遺失。"
 msgid "The entered host/network IP is not correct.\n"
 msgstr "輸入的主機/網路 IP 是錯誤的。\n"
 
-#: printer/printerdrake.pm:253
-#: printer/printerdrake.pm:429
+#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
 #, c-format
 msgid "Examples for correct IPs:\n"
 msgstr "正確的 IP 位址範例：\n"
@@ -12258,16 +11699,20 @@ msgstr "正確的 IP 位址範例：\n"
 msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr "這個主機/網路已經存在於列表中，無法重複新增\n"
 
-#: printer/printerdrake.pm:346
-#: printer/printerdrake.pm:416
+#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
 #, c-format
 msgid "Accessing printers on remote CUPS servers"
 msgstr "存取遠端的 CUPS 伺服器印表機"
 
 #: printer/printerdrake.pm:347
 #, c-format
-msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."
-msgstr "在這裡新增您想要使用的 CUPS 伺服器。您只有在伺服器沒有向區域網路廣播它所擁有的印表機資訊時才需要作這件事。"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr ""
+"在這裡新增您想要使用的 CUPS 伺服器。您只有在伺服器沒有向區域網路廣播它所擁有"
+"的印表機資訊時才需要作這件事。"
 
 #: printer/printerdrake.pm:358
 #, c-format
@@ -12304,8 +11749,7 @@ msgstr "伺服器 IP 遺失！"
 msgid "The entered IP is not correct.\n"
 msgstr "輸入的 IP 位址不正確。\n"
 
-#: printer/printerdrake.pm:440
-#: printer/printerdrake.pm:2154
+#: printer/printerdrake.pm:440 printer/printerdrake.pm:2154
 #, c-format
 msgid "The port number should be an integer!"
 msgstr "通訊埠號應該是一個整數！"
@@ -12315,85 +11759,55 @@ msgstr "通訊埠號應該是一個整數！"
 msgid "This server is already in the list, it cannot be added again.\n"
 msgstr "這個伺服器已經存在於列表中，無法重複新增\n"
 
-#: printer/printerdrake.pm:462
-#: printer/printerdrake.pm:2181
-#: standalone/drakups:251
-#: standalone/harddrake2:52
+#: printer/printerdrake.pm:462 printer/printerdrake.pm:2181
+#: standalone/drakups:251 standalone/harddrake2:52
 #, c-format
 msgid "Port"
 msgstr "通訊埠"
 
-#: printer/printerdrake.pm:495
-#: printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526
-#: printer/printerdrake.pm:530
+#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
+#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
 #: printer/printerdrake.pm:536
 #, c-format
 msgid "On, Name or IP of remote server:"
 msgstr "開，遠端伺服器的名稱或 IP 位址："
 
-#: printer/printerdrake.pm:514
-#: printer/printerdrake.pm:4697
-#: printer/printerdrake.pm:4763
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:4706
+#: printer/printerdrake.pm:4772
 #, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"
 
-#: printer/printerdrake.pm:566
-#: printer/printerdrake.pm:586
-#: printer/printerdrake.pm:811
-#: printer/printerdrake.pm:880
-#: printer/printerdrake.pm:901
-#: printer/printerdrake.pm:927
-#: printer/printerdrake.pm:1036
-#: printer/printerdrake.pm:1078
-#: printer/printerdrake.pm:1088
-#: printer/printerdrake.pm:1123
-#: printer/printerdrake.pm:2241
-#: printer/printerdrake.pm:2456
-#: printer/printerdrake.pm:2488
-#: printer/printerdrake.pm:2550
-#: printer/printerdrake.pm:2602
-#: printer/printerdrake.pm:2619
-#: printer/printerdrake.pm:2663
-#: printer/printerdrake.pm:2703
-#: printer/printerdrake.pm:2753
-#: printer/printerdrake.pm:2790
-#: printer/printerdrake.pm:2801
-#: printer/printerdrake.pm:3069
-#: printer/printerdrake.pm:3074
-#: printer/printerdrake.pm:3222
-#: printer/printerdrake.pm:3333
-#: printer/printerdrake.pm:3946
-#: printer/printerdrake.pm:4013
-#: printer/printerdrake.pm:4062
-#: printer/printerdrake.pm:4065
-#: printer/printerdrake.pm:4197
-#: printer/printerdrake.pm:4298
-#: printer/printerdrake.pm:4370
-#: printer/printerdrake.pm:4391
-#: printer/printerdrake.pm:4401
-#: printer/printerdrake.pm:4492
-#: printer/printerdrake.pm:4587
-#: printer/printerdrake.pm:4593
-#: printer/printerdrake.pm:4617
-#: printer/printerdrake.pm:4724
-#: printer/printerdrake.pm:4833
-#: printer/printerdrake.pm:4853
-#: printer/printerdrake.pm:4862
-#: printer/printerdrake.pm:4877
-#: printer/printerdrake.pm:5078
-#: printer/printerdrake.pm:5540
-#: printer/printerdrake.pm:5623
-#: standalone/printerdrake:75
-#: standalone/printerdrake:590
+#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
+#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
+#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
+#: printer/printerdrake.pm:1036 printer/printerdrake.pm:1078
+#: printer/printerdrake.pm:1088 printer/printerdrake.pm:1123
+#: printer/printerdrake.pm:2241 printer/printerdrake.pm:2456
+#: printer/printerdrake.pm:2488 printer/printerdrake.pm:2550
+#: printer/printerdrake.pm:2602 printer/printerdrake.pm:2619
+#: printer/printerdrake.pm:2663 printer/printerdrake.pm:2703
+#: printer/printerdrake.pm:2753 printer/printerdrake.pm:2790
+#: printer/printerdrake.pm:2801 printer/printerdrake.pm:3074
+#: printer/printerdrake.pm:3079 printer/printerdrake.pm:3227
+#: printer/printerdrake.pm:3338 printer/printerdrake.pm:3951
+#: printer/printerdrake.pm:4018 printer/printerdrake.pm:4067
+#: printer/printerdrake.pm:4070 printer/printerdrake.pm:4202
+#: printer/printerdrake.pm:4303 printer/printerdrake.pm:4375
+#: printer/printerdrake.pm:4396 printer/printerdrake.pm:4406
+#: printer/printerdrake.pm:4497 printer/printerdrake.pm:4592
+#: printer/printerdrake.pm:4598 printer/printerdrake.pm:4626
+#: printer/printerdrake.pm:4733 printer/printerdrake.pm:4842
+#: printer/printerdrake.pm:4862 printer/printerdrake.pm:4871
+#: printer/printerdrake.pm:4886 printer/printerdrake.pm:5087
+#: printer/printerdrake.pm:5564 printer/printerdrake.pm:5647
+#: standalone/printerdrake:75 standalone/printerdrake:590
 #, c-format
 msgid "Printerdrake"
 msgstr "PrinterDrake"
 
-#: printer/printerdrake.pm:567
-#: printer/printerdrake.pm:4299
-#: printer/printerdrake.pm:4834
+#: printer/printerdrake.pm:567 printer/printerdrake.pm:4304
+#: printer/printerdrake.pm:4843
 #, c-format
 msgid "Reading printer data..."
 msgstr "正在讀取印表機資料..."
@@ -12405,12 +11819,14 @@ msgstr "正在重新啟動 CUPS..."
 
 #: printer/printerdrake.pm:614
 #, c-format
-msgid "Allow pop-up windows, printer setup and package installation may be canceled"
+msgid ""
+"Allow pop-up windows, printer setup and package installation may be canceled"
 msgstr ""
 
 #: printer/printerdrake.pm:616
 #, c-format
-msgid "No pop-up windows, printer setup and package installation cannot be canceled"
+msgid ""
+"No pop-up windows, printer setup and package installation cannot be canceled"
 msgstr ""
 
 #: printer/printerdrake.pm:622
@@ -12420,7 +11836,9 @@ msgstr "印表機自動管理"
 
 #: printer/printerdrake.pm:623
 #, c-format
-msgid "Here you can configure printer administration tasks which should be done automatically."
+msgid ""
+"Here you can configure printer administration tasks which should be done "
+"automatically."
 msgstr ""
 
 #: printer/printerdrake.pm:626
@@ -12428,8 +11846,7 @@ msgstr ""
 msgid "Do automatic configuration of new printers"
 msgstr "自動設定新的印表機"
 
-#: printer/printerdrake.pm:627
-#: printer/printerdrake.pm:641
+#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
 #, c-format
 msgid "when a USB printer is connected and turned on"
 msgstr "於您的印表機已接上並且打開電源時"
@@ -12461,7 +11878,10 @@ msgstr "使用「%s」印表機進行列印"
 
 #: printer/printerdrake.pm:682
 #, c-format
-msgid "Here you can configure how errors during the communication between your computer and the printer \"%s\" should be handled (for example if the printer is not turned on)."
+msgid ""
+"Here you can configure how errors during the communication between your "
+"computer and the printer \"%s\" should be handled (for example if the "
+"printer is not turned on)."
 msgstr ""
 
 #: printer/printerdrake.pm:686
@@ -12494,8 +11914,7 @@ msgstr "重試次數"
 msgid "Delay between retries (in sec)"
 msgstr "重試間隔延遲 (秒)"
 
-#: printer/printerdrake.pm:745
-#: printer/printerdrake.pm:765
+#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
 #, c-format
 msgid "Select Printer Connection"
 msgstr "選擇印表機連線"
@@ -12509,25 +11928,27 @@ msgstr "印表機是如何連線的?"
 #, c-format
 msgid ""
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected."
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
 "\n"
 "位於遠端 CUPS 伺服器的印表機上並不需要在這裡設定；\n"
 "這些印表機將自動偵測到。"
 
-#: printer/printerdrake.pm:751
-#: printer/printerdrake.pm:5080
+#: printer/printerdrake.pm:751 printer/printerdrake.pm:5089
 #, c-format
 msgid ""
 "\n"
-"WARNING: No local network connection active, remote printers can neither be detected nor tested!"
+"WARNING: No local network connection active, remote printers can neither be "
+"detected nor tested!"
 msgstr ""
 "\n"
 "警告：本地端網路連線並未啟動，無法偵測遠端印表機也無法測試！"
 
 #: printer/printerdrake.pm:758
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
+msgid ""
+"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
 msgstr "印表機自動偵測 (本地端，TCP/Socket，SMB 印表機，與裝置 URI )"
 
 #: printer/printerdrake.pm:760
@@ -12542,7 +11963,10 @@ msgstr "請在此輸入網路印表機自動偵測的連線逾時時間 (以秒�
 
 #: printer/printerdrake.pm:768
 #, c-format
-msgid "The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. "
+msgid ""
+"The longer you choose the timeout, the more reliable the detections of "
+"network printers will be, but the scan can take longer then, especially if "
+"there are many machines with local firewalls in the network. "
 msgstr ""
 
 #: printer/printerdrake.pm:772
@@ -12621,7 +12045,8 @@ msgstr ""
 
 #: printer/printerdrake.pm:846
 #, c-format
-msgid "There are no printers found which are directly connected to your machine"
+msgid ""
+"There are no printers found which are directly connected to your machine"
 msgstr "目前沒有找到直接連結在您電腦上的印表機"
 
 #: printer/printerdrake.pm:849
@@ -12631,7 +12056,9 @@ msgstr " (請確認您全部的印表機連結並且打開電源了)。\n"
 
 #: printer/printerdrake.pm:862
 #, c-format
-msgid "Do you want to enable printing on the printers mentioned above or on printers in the local network?\n"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr "您要啟用上面提及的印表機列印服務，或者是本地端網路的列印服務？\n"
 
 #: printer/printerdrake.pm:863
@@ -12651,7 +12078,9 @@ msgstr "您確定要設定這台電腦上的列印服務嗎？\n"
 
 #: printer/printerdrake.pm:867
 #, c-format
-msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed."
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr "注意：根據印表機型號與列印系統，將要安裝總共 %d MB 的附加軟體。"
 
 #: printer/printerdrake.pm:884
@@ -12681,21 +12110,28 @@ msgstr "找到新的印表機"
 
 #: printer/printerdrake.pm:999
 #, c-format
-msgid "The following new printers were found and Printerdrake can automatically set them up for you. If you do not want to have all of them set up, unselect the ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
+msgid ""
+"The following new printers were found and Printerdrake can automatically set "
+"them up for you. If you do not want to have all of them set up, unselect the "
+"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
 msgstr ""
 
 #: printer/printerdrake.pm:1000
 #, c-format
-msgid "The following new printer was found and printerdrake can automatically set it up for you. If you do not want to have it set up, unselect it, or click \"Cancel\".\n"
+msgid ""
+"The following new printer was found and printerdrake can automatically set "
+"it up for you. If you do not want to have it set up, unselect it, or click "
+"\"Cancel\".\n"
 msgstr ""
 
 #: printer/printerdrake.pm:1001
 #, c-format
-msgid "Note that for certain printer models additional packages need to be installed. So keep your installation media handy.\n"
+msgid ""
+"Note that for certain printer models additional packages need to be "
+"installed. So keep your installation media handy.\n"
 msgstr ""
 
-#: printer/printerdrake.pm:1037
-#: printer/printerdrake.pm:1079
+#: printer/printerdrake.pm:1037 printer/printerdrake.pm:1079
 #, c-format
 msgid "Configuring printer on %s..."
 msgstr "正在設定印表機於 %s..."
@@ -12710,20 +12146,17 @@ msgstr "("
 msgid " on "
 msgstr "在"
 
-#: printer/printerdrake.pm:1064
-#: standalone/scannerdrake:137
+#: printer/printerdrake.pm:1064 standalone/scannerdrake:137
 #, c-format
 msgid ")"
 msgstr ")"
 
-#: printer/printerdrake.pm:1069
-#: printer/printerdrake.pm:3234
+#: printer/printerdrake.pm:1069 printer/printerdrake.pm:3239
 #, c-format
 msgid "Printer model selection"
 msgstr "選擇印表機的型號"
 
-#: printer/printerdrake.pm:1070
-#: printer/printerdrake.pm:3235
+#: printer/printerdrake.pm:1070 printer/printerdrake.pm:3240
 #, c-format
 msgid "Which printer model do you have?"
 msgstr "您的印表機屬於那種型號？"
@@ -12733,20 +12166,21 @@ msgstr "您的印表機屬於那種型號？"
 msgid ""
 "\n"
 "\n"
-"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 "\n"
 "\n"
 "Printerdrake 無法確定您的印表機 %s 的型號。請由列表中選取正確的型號。"
 
-#: printer/printerdrake.pm:1074
-#: printer/printerdrake.pm:3240
+#: printer/printerdrake.pm:1074 printer/printerdrake.pm:3245
 #, c-format
-msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one."
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
 msgstr "如果您的印表機並未列出，請選取一個相容 (見印表機說明書) 或者是相似的。"
 
-#: printer/printerdrake.pm:1089
-#: printer/printerdrake.pm:4854
+#: printer/printerdrake.pm:1089 printer/printerdrake.pm:4863
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "正在設定印表機 \"%s\" 中..."
@@ -12760,27 +12194,28 @@ msgstr ""
 
 #: printer/printerdrake.pm:1125
 #, c-format
-msgid "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's main menu. "
+msgid ""
+"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
+"main menu. "
 msgstr ""
 
-#: printer/printerdrake.pm:1125
+#: printer/printerdrake.pm:1125 printer/printerdrake.pm:5139
 #, c-format
 msgid "Configure Auto Administration"
 msgstr "設定自動管理"
 
 #: printer/printerdrake.pm:1126
 #, c-format
-msgid "There you can also choose in which situation automatic printer setup is done (On Printerdrake startup, on printing system startup, when connecting a new USB printer)."
+msgid ""
+"There you can also choose in which situation automatic printer setup is done "
+"(On Printerdrake startup, on printing system startup, when connecting a new "
+"USB printer)."
 msgstr ""
 
-#: printer/printerdrake.pm:1274
-#: printer/printerdrake.pm:1286
-#: printer/printerdrake.pm:1393
-#: printer/printerdrake.pm:2422
-#: printer/printerdrake.pm:2437
-#: printer/printerdrake.pm:2509
-#: printer/printerdrake.pm:5097
-#: printer/printerdrake.pm:5270
+#: printer/printerdrake.pm:1274 printer/printerdrake.pm:1286
+#: printer/printerdrake.pm:1393 printer/printerdrake.pm:2422
+#: printer/printerdrake.pm:2437 printer/printerdrake.pm:2509
+#: printer/printerdrake.pm:5106 printer/printerdrake.pm:5293
 #, c-format
 msgid "Add a new printer"
 msgstr "新增一個印表機"
@@ -12791,16 +12226,20 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
 "\n"
-"It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
 "\n"
 "歡迎來到印表機設定精靈\n"
 "\n"
 "這個精靈允許您安裝本地端或遠端印表機以便被這台電腦及網路中的其他電腦使用。\n"
 "\n"
-"它將詢問您設定印表機所需的所有必要資訊並提供您所有可用的印表機驅動程式、驅動程式選項、與印表機連線型態。"
+"它將詢問您設定印表機所需的所有必要資訊並提供您所有可用的印表機驅動程式、驅動"
+"程式選項、與印表機連線型態。"
 
 #: printer/printerdrake.pm:1288
 #, c-format
@@ -12808,24 +12247,36 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
 "\n"
-"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected. Also your network printer(s) and your Windows "
+"machines must be connected and turned on.\n"
 "\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you do not "
+"need it.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 "\n"
 "歡迎來到印表機設定精靈\n"
 "\n"
-"這個精靈將會幫助您安裝您的印表機 - 不論它是直接連結到這台電腦的印表機、網路印表機或是一個經由 Windows 所分享的印表機。\n"
+"這個精靈將會幫助您安裝您的印表機 - 不論它是直接連結到這台電腦的印表機、網路印"
+"表機或是一個經由 Windows 所分享的印表機。\n"
 "\n"
-"請插入並開啟所有連接到這台電腦上的印表機來進行自動偵測。此外您的網路印表機與您的 Windows 電腦必須要連線並且開啟電源。\n"
+"請插入並開啟所有連接到這台電腦上的印表機來進行自動偵測。此外您的網路印表機與"
+"您的 Windows 電腦必須要連線並且開啟電源。\n"
 "\n"
-"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功能。\n"
+"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時"
+"間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功"
+"能。\n"
 "\n"
-"當您準備好時，請點選「下一步」，或者如果您現在不想設定印表機，請點選「取消」。"
+"當您準備好時，請點選「下一步」，或者如果您現在不想設定印表機，請點選「取"
+"消」。"
 
 #: printer/printerdrake.pm:1297
 #, c-format
@@ -12833,17 +12284,21 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
 "\n"
-"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 "\n"
 "歡迎來到印表機設定精靈\n"
 "\n"
 "接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n"
-"若是您要設定的印表機是直接安裝在你機器上，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。\n"
+"若是您要設定的印表機是直接安裝在你機器上，請先確認您的線路有安插正確，並且電"
+"源已經開啟，以便於自動偵測您的印表機型號。\n"
 "\n"
 "當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。"
 
@@ -12853,21 +12308,32 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
 "\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
 "\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you do not need it.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 "\n"
 "歡迎來到印表機設定精靈\n"
 "\n"
-"接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機以及遠端網路印表機。\n"
-"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。若是您要使用的是網路印表機，請確定該印表機的電源也是處於開啟狀態並且已經正確的連線。\n"
+"接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機以及遠端網路印"
+"表機。\n"
+"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且"
+"電源已經開啟，以便於自動偵測您的印表機型號。若是您要使用的是網路印表機，請確"
+"定該印表機的電源也是處於開啟狀態並且已經正確的連線。\n"
 "\n"
-"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功能。\n"
+"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時"
+"間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功"
+"能。\n"
 "\n"
 "當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。"
 
@@ -12877,17 +12343,21 @@ msgid ""
 "\n"
 "Welcome to the Printer Setup Wizard\n"
 "\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
 "\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
 "\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 "\n"
 "歡迎來到印表機設定精靈\n"
 "\n"
 "接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n"
-"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。\n"
+"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且"
+"電源已經開啟，以便於自動偵測您的印表機型號。\n"
 "\n"
 "當您確認沒問題時，點選「下一步」，或者點選「取消」放棄設定。"
 
@@ -12917,31 +12387,28 @@ msgid ""
 "\n"
 "Congratulations, your printer is now installed and configured!\n"
 "\n"
-"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
 "\n"
-"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center."
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
 msgstr ""
 "\n"
 "恭喜，您的印表機已經安裝並設定完成！\n"
 "\n"
-"您可以在您的應用程式中使用 \"列印\" 這個指令 (通常位於 \"檔案\" 這個選單下)。若是您事後需要新增、刪除、重新命名，或者修改預設選項 (例如紙張輸入方向、輸出品質...等)，請在 %s 控制中心中的 \"硬體\" 選擇 \"印表機\" 來設定。"
-
-#: printer/printerdrake.pm:1430
-#: printer/printerdrake.pm:1662
-#: printer/printerdrake.pm:1725
-#: printer/printerdrake.pm:1817
-#: printer/printerdrake.pm:1955
-#: printer/printerdrake.pm:2031
-#: printer/printerdrake.pm:2198
-#: printer/printerdrake.pm:2291
-#: printer/printerdrake.pm:2300
-#: printer/printerdrake.pm:2309
-#: printer/printerdrake.pm:2320
-#: printer/printerdrake.pm:2462
-#: printer/printerdrake.pm:2562
-#: printer/printerdrake.pm:2608
-#: printer/printerdrake.pm:2675
-#: printer/printerdrake.pm:2710
+"您可以在您的應用程式中使用 \"列印\" 這個指令 (通常位於 \"檔案\" 這個選單下)。"
+"若是您事後需要新增、刪除、重新命名，或者修改預設選項 (例如紙張輸入方向、輸出"
+"品質...等)，請在 %s 控制中心中的 \"硬體\" 選擇 \"印表機\" 來設定。"
+
+#: printer/printerdrake.pm:1430 printer/printerdrake.pm:1662
+#: printer/printerdrake.pm:1725 printer/printerdrake.pm:1817
+#: printer/printerdrake.pm:1955 printer/printerdrake.pm:2031
+#: printer/printerdrake.pm:2198 printer/printerdrake.pm:2291
+#: printer/printerdrake.pm:2300 printer/printerdrake.pm:2309
+#: printer/printerdrake.pm:2320 printer/printerdrake.pm:2462
+#: printer/printerdrake.pm:2562 printer/printerdrake.pm:2608
+#: printer/printerdrake.pm:2675 printer/printerdrake.pm:2710
 #, c-format
 msgid "Could not install the %s packages!"
 msgstr "無法安裝 %s 套件！"
@@ -12951,10 +12418,8 @@ msgstr "無法安裝 %s 套件！"
 msgid "Skipping Windows/SMB server auto-detection"
 msgstr "略過 Windows/SMB 伺服器自動偵測"
 
-#: printer/printerdrake.pm:1438
-#: printer/printerdrake.pm:1585
-#: printer/printerdrake.pm:1823
-#: printer/printerdrake.pm:2085
+#: printer/printerdrake.pm:1438 printer/printerdrake.pm:1585
+#: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085
 #, c-format
 msgid "Printer auto-detection"
 msgstr "印表機自動偵測"
@@ -12979,8 +12444,7 @@ msgstr ", 網路印表機 \"%s\"，位於 SMB/Windows 伺服器 \"%s\""
 msgid "Detected %s"
 msgstr "偵測到 %s"
 
-#: printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1508
+#: printer/printerdrake.pm:1481 printer/printerdrake.pm:1508
 #: printer/printerdrake.pm:1526
 #, c-format
 msgid "Printer on parallel port #%s"
@@ -13003,7 +12467,11 @@ msgstr "本機印表機"
 
 #: printer/printerdrake.pm:1572
 #, c-format
-msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
 msgstr ""
 "無法找到本地印表機！請手動指定印表機的所在裝置名稱。\n"
 "(並列埠：/dev/lp0, /dev/lp1, ... 相當於 LPT1:, LPT2:..., \n"
@@ -13029,42 +12497,52 @@ msgstr "本機印表機"
 msgid "Available printers"
 msgstr "可用的印表機"
 
-#: printer/printerdrake.pm:1599
-#: printer/printerdrake.pm:1608
+#: printer/printerdrake.pm:1599 printer/printerdrake.pm:1608
 #, c-format
 msgid "The following printer was auto-detected. "
 msgstr "已偵測到下列的印表機。"
 
 #: printer/printerdrake.pm:1601
 #, c-format
-msgid "If it is not the one you want to configure, enter a device name/file name in the input line"
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr "若是找到的項目並不是你要設定的, 那麼請在欄位中輸入裝置名稱/檔案名稱"
 
 #: printer/printerdrake.pm:1602
 #, c-format
-msgid "Alternatively, you can specify a device name/file name in the input line"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
 msgstr "或者您也可以在欄位中指定該裝置的名稱或檔案名稱"
 
-#: printer/printerdrake.pm:1603
-#: printer/printerdrake.pm:1612
+#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1612
 #, c-format
 msgid "Here is a list of all auto-detected printers. "
 msgstr "這裡有份所有自動偵測到的印表機列表。"
 
 #: printer/printerdrake.pm:1605
 #, c-format
-msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
+msgid ""
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
 msgstr "請選擇您要設定的印表機，或者在輸入欄位中輸入該裝置或檔案的名稱"
 
 #: printer/printerdrake.pm:1606
 #, c-format
-msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
 msgstr "請選擇您印表機的連接埠, 或者是輸入該裝置的名稱"
 
 #: printer/printerdrake.pm:1610
 #, c-format
-msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
-msgstr "印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自"
+"訂的印表機設定，請打開 「手動設定」。"
 
 #: printer/printerdrake.pm:1611
 #, c-format
@@ -13073,8 +12551,14 @@ msgstr ""
 
 #: printer/printerdrake.pm:1614
 #, c-format
-msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
-msgstr "請選擇您要設定的印表機。印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"請選擇您要設定的印表機。印表機的相關設定將會自動完成。若您的印表機沒有正確的"
+"被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。"
 
 #: printer/printerdrake.pm:1615
 #, c-format
@@ -13083,7 +12567,9 @@ msgstr "請選取印表工作應該送達的印表機。"
 
 #: printer/printerdrake.pm:1617
 #, c-format
-msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
 msgstr "請選擇您印表機的連接埠，或在輸入欄位中輸入該裝置或檔案的名稱"
 
 #: printer/printerdrake.pm:1618
@@ -13093,7 +12579,9 @@ msgstr "請選取印表機所連接的連接埠。"
 
 #: printer/printerdrake.pm:1620
 #, c-format
-msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 " (並列埠：/dev/lp0, /dev/lp1, ...... 相當於 LPT1:, LPT2:....\n"
 "第一台 USB 印表機是：/dev/usb/lp0, 第二台：/dev/usb/lp1)。"
@@ -13103,16 +12591,11 @@ msgstr ""
 msgid "You must choose/enter a printer/device!"
 msgstr "您必須選擇/輸入一印表機/裝置！"
 
-#: printer/printerdrake.pm:1664
-#: printer/printerdrake.pm:1727
-#: printer/printerdrake.pm:1819
-#: printer/printerdrake.pm:1957
-#: printer/printerdrake.pm:2033
-#: printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2293
-#: printer/printerdrake.pm:2302
-#: printer/printerdrake.pm:2311
-#: printer/printerdrake.pm:2322
+#: printer/printerdrake.pm:1664 printer/printerdrake.pm:1727
+#: printer/printerdrake.pm:1819 printer/printerdrake.pm:1957
+#: printer/printerdrake.pm:2033 printer/printerdrake.pm:2200
+#: printer/printerdrake.pm:2293 printer/printerdrake.pm:2302
+#: printer/printerdrake.pm:2311 printer/printerdrake.pm:2322
 #, c-format
 msgid "Aborting"
 msgstr "放棄"
@@ -13124,7 +12607,9 @@ msgstr "遠端 lpd 印表機選項"
 
 #: printer/printerdrake.pm:1701
 #, c-format
-msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
 "如要使用遠端的 lpd 印表機, 您必須要指定用來提供\n"
 "印表服務的遠端列印伺服主機名稱, 以及分享出來\n"
@@ -13150,48 +12635,36 @@ msgstr "沒有指定遠端主機名稱 !"
 msgid "Remote printer name missing!"
 msgstr "沒有指定印表機名稱 !"
 
-#: printer/printerdrake.pm:1740
-#: printer/printerdrake.pm:2216
-#: printer/printerdrake.pm:2341
-#: standalone/drakTermServ:447
-#: standalone/drakTermServ:769
-#: standalone/drakTermServ:785
-#: standalone/drakTermServ:1590
-#: standalone/drakTermServ:1599
-#: standalone/drakTermServ:1611
-#: standalone/drakbackup:499
-#: standalone/drakbackup:605
-#: standalone/drakbackup:640
-#: standalone/drakbackup:741
-#: standalone/draknfs:203
-#: standalone/draksambashare:623
-#: standalone/draksambashare:790
+#: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216
+#: printer/printerdrake.pm:2341 standalone/drakTermServ:447
+#: standalone/drakTermServ:769 standalone/drakTermServ:785
+#: standalone/drakTermServ:1590 standalone/drakTermServ:1599
+#: standalone/drakTermServ:1611 standalone/drakbackup:499
+#: standalone/drakbackup:605 standalone/drakbackup:640
+#: standalone/drakbackup:741 standalone/draknfs:203
+#: standalone/draksambashare:623 standalone/draksambashare:790
 #: standalone/harddrake2:259
 #, c-format
 msgid "Information"
 msgstr "資訊"
 
-#: printer/printerdrake.pm:1740
-#: printer/printerdrake.pm:2216
+#: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216
 #: printer/printerdrake.pm:2341
 #, c-format
 msgid "Detected model: %s %s"
 msgstr "偵測到的型號：%s %s"
 
-#: printer/printerdrake.pm:1823
-#: printer/printerdrake.pm:2085
+#: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085
 #, c-format
 msgid "Scanning network..."
 msgstr "掃描網路中..."
 
-#: printer/printerdrake.pm:1835
-#: printer/printerdrake.pm:1856
+#: printer/printerdrake.pm:1835 printer/printerdrake.pm:1856
 #, c-format
 msgid ", printer \"%s\" on server \"%s\""
 msgstr ", 印表機 \"%s\", 位於主機 \"%s\""
 
-#: printer/printerdrake.pm:1838
-#: printer/printerdrake.pm:1859
+#: printer/printerdrake.pm:1838 printer/printerdrake.pm:1859
 #, c-format
 msgid "Printer \"%s\" on server \"%s\""
 msgstr "印表機 \"%s\", 位於 \"%s\""
@@ -13203,7 +12676,11 @@ msgstr "網路芳鄰 (SMB, Windows 9x/NT) 印表機選項"
 
 #: printer/printerdrake.pm:1881
 #, c-format
-msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."
+msgid ""
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
 "如要使用網路芳鄰印表機, 您必須要提供主機網芳名稱 \n"
 "(注意! 這個名稱與 TCP/IP 的主機名稱可能並不相同), \n"
@@ -13212,8 +12689,12 @@ msgstr ""
 
 #: printer/printerdrake.pm:1882
 #, c-format
-msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed."
-msgstr "如果偵測出來的印表機是您所需要的, 你可以選擇該項目, 並輸入存取的使用者名稱、密碼, 必要時並輸入群組名稱。"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"如果偵測出來的印表機是您所需要的, 你可以選擇該項目, 並輸入存取的使用者名稱、"
+"密碼, 必要時並輸入群組名稱。"
 
 #: printer/printerdrake.pm:1884
 #, c-format
@@ -13225,8 +12706,7 @@ msgstr "SMB 主機名稱”"
 msgid "SMB server IP"
 msgstr "SMB 伺服器 IP"
 
-#: printer/printerdrake.pm:1886
-#: standalone/draksambashare:61
+#: printer/printerdrake.pm:1886 standalone/draksambashare:61
 #, c-format
 msgid "Share name"
 msgstr "印表機名稱"
@@ -13259,39 +12739,62 @@ msgstr "安全性警告"
 #: printer/printerdrake.pm:1912
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
 "\n"
 msgstr ""
-"您目前打算使用一組帳號與密碼以便於能夠存取 Windows 主機來進行列印的工作。不過您需要注意的是, 因為系統是呼叫 Samba 的程式軟體連線到 Windows 主機, 所以執行程式時會在命令列加上您所設定輸入的帳號密碼。這可能會有一些安全性問題, 比方有使用者可以執行 ps aux指令來查看您帳號密碼內容。\n"
+"您目前打算使用一組帳號與密碼以便於能夠存取 Windows 主機來進行列印的工作。不過"
+"您需要注意的是, 因為系統是呼叫 Samba 的程式軟體連線到 Windows 主機, 所以執行"
+"程式時會在命令列加上您所設定輸入的帳號密碼。這可能會有一些安全性問題, 比方有"
+"使用者可以執行 ps aux指令來查看您帳號密碼內容。\n"
 "\n"
 "所以建議您可以使用下面方式：\n"
 "\n"
-"在 Windows 主機設置不需要密碼的帳號, 比方「GUEST」, 然後只有開放該帳號具備列印的功能。請注意, 千萬不要直接把 administrator 帳號設定為不需要密碼, 然後直接使用該 administrator 登入, 因為這是很危險的。\n"
+"在 Windows 主機設置不需要密碼的帳號, 比方「GUEST」, 然後只有開放該帳號具備列"
+"印的功能。請注意, 千萬不要直接把 administrator 帳號設定為不需要密碼, 然後直接"
+"使用該 administrator 登入, 因為這是很危險的。\n"
 "\n"
-"或者是您可以設定您的 Windows 機器能夠讓印表機與 LPD 協定配合, 如此您就可以在 Printerdrake 程式內使用「%s」連線類型進行設定與列印。\n"
+"或者是您可以設定您的 Windows 機器能夠讓印表機與 LPD 協定配合, 如此您就可以在 "
+"Printerdrake 程式內使用「%s」連線類型進行設定與列印。\n"
 "\n"
 
 #: printer/printerdrake.pm:1922
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
 "\n"
-msgstr "請設定好您的 Windows 主機的服務, 確認印表機能夠在 IPP 通訊協定上正常運作, 以便於在 PrinterDrake 程式內使用 \"%s\" 連線能夠存取到。\n"
+msgstr ""
+"請設定好您的 Windows 主機的服務, 確認印表機能夠在 IPP 通訊協定上正常運作, 以"
+"便於在 PrinterDrake 程式內使用 \"%s\" 連線能夠存取到。\n"
 
 #: printer/printerdrake.pm:1925
 #, c-format
 msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
 "\n"
 "Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
-"將您的印表機安裝在 Linux 伺服器上且讓您的 Windows 機器以客戶端連線到 Linux 伺服器\n"
+"將您的印表機安裝在 Linux 伺服器上且讓您的 Windows 機器以客戶端連線到 Linux 伺"
+"服器\n"
 "\n"
 "您確定要繼續進行設定這台印表機下去嗎?"
 
@@ -13302,7 +12805,11 @@ msgstr "NetWare 印表機選項"
 
 #: printer/printerdrake.pm:2005
 #, c-format
-msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
 "如要使用 NetWare 印表機, 您必須要提供 NetWare\n"
 "列印伺服器的主機名稱 (注意! 這個名稱與 TCP/IP \n"
@@ -13329,14 +12836,12 @@ msgstr "NCP 伺服器名稱沒指定!"
 msgid "NCP queue name missing!"
 msgstr "NCP 列印佇列名稱名稱沒指定"
 
-#: printer/printerdrake.pm:2097
-#: printer/printerdrake.pm:2118
+#: printer/printerdrake.pm:2097 printer/printerdrake.pm:2118
 #, c-format
 msgid ", host \"%s\", port %s"
 msgstr ", 主機 \"%s\", 連接埠 %s"
 
-#: printer/printerdrake.pm:2100
-#: printer/printerdrake.pm:2121
+#: printer/printerdrake.pm:2100 printer/printerdrake.pm:2121
 #, c-format
 msgid "Host \"%s\", port %s"
 msgstr "主機 \"%s\", 連接埠 %s"
@@ -13348,14 +12853,20 @@ msgstr "TCP/Socket 印表機選項"
 
 #: printer/printerdrake.pm:2145
 #, c-format
-msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields."
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
 "請由清單內選擇您預期的印表機項目, 並且輸入主機名稱、\n"
 "IP等資訊, 必要時請輸入該連結埠號 (預設使用 port 9100)。"
 
 #: printer/printerdrake.pm:2146
 #, c-format
-msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
 msgstr ""
 "要透過TCP/socket這類型的印表機進行列印, 您需要\n"
 "提供該印表機的主機名稱, 同時也可能需要選擇性輸入\n"
@@ -13379,15 +12890,17 @@ msgstr "印表機主機名稱或是 IP"
 msgid "Refreshing Device URI list..."
 msgstr "正在更新設備 URL 列表..."
 
-#: printer/printerdrake.pm:2245
-#: printer/printerdrake.pm:2247
+#: printer/printerdrake.pm:2245 printer/printerdrake.pm:2247
 #, c-format
 msgid "Printer Device URI"
 msgstr "印表機的 URI"
 
 #: printer/printerdrake.pm:2246
 #, c-format
-msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
 msgstr ""
 "您可以直接使用 URI 的方式存取該印表機。URI 必須完整輸入\n"
 "CUPS伺服器所在位址, 或者是用 Foomatic 規格方式輸入。\n"
@@ -13405,7 +12918,9 @@ msgstr "使用 Pipe 管線方式組成指令"
 
 #: printer/printerdrake.pm:2378
 #, c-format
-msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
 #: printer/printerdrake.pm:2379
@@ -13420,22 +12935,33 @@ msgstr "必須輸入指令列！"
 
 #: printer/printerdrake.pm:2423
 #, c-format
-msgid "On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. "
+msgid ""
+"On many HP printers there are special functions available, maintenance (ink "
+"level checking, nozzle cleaning. head alignment, ...) on all not too old "
+"inkjets, scanning on multi-function devices, and memory card access on "
+"printers with card readers. "
 msgstr ""
 
 #: printer/printerdrake.pm:2425
 #, c-format
-msgid "To access these extra functions on your HP printer, it must be set up with the appropriate software: "
+msgid ""
+"To access these extra functions on your HP printer, it must be set up with "
+"the appropriate software: "
 msgstr ""
 
 #: printer/printerdrake.pm:2426
 #, c-format
-msgid "Either with the newer HPLIP which allows printer maintenance through the easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on newer PhotoSmart models "
+msgid ""
+"Either with the newer HPLIP which allows printer maintenance through the "
+"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
+"newer PhotoSmart models "
 msgstr ""
 
 #: printer/printerdrake.pm:2427
 #, c-format
-msgid "or with the older HPOJ which allows only scanner and memory card access, but could help you in case of failure of HPLIP. "
+msgid ""
+"or with the older HPOJ which allows only scanner and memory card access, but "
+"could help you in case of failure of HPLIP. "
 msgstr ""
 
 #: printer/printerdrake.pm:2429
@@ -13443,19 +12969,15 @@ msgstr ""
 msgid "What is your choice (choose \"None\" for non-HP printers)? "
 msgstr ""
 
-#: printer/printerdrake.pm:2430
-#: printer/printerdrake.pm:2431
-#: printer/printerdrake.pm:2457
-#: printer/printerdrake.pm:2463
+#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2431
+#: printer/printerdrake.pm:2457 printer/printerdrake.pm:2463
 #: printer/printerdrake.pm:2489
 #, c-format
 msgid "HPLIP"
 msgstr ""
 
-#: printer/printerdrake.pm:2430
-#: printer/printerdrake.pm:2433
-#: printer/printerdrake.pm:2603
-#: printer/printerdrake.pm:2609
+#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2433
+#: printer/printerdrake.pm:2603 printer/printerdrake.pm:2609
 #: printer/printerdrake.pm:2620
 #, c-format
 msgid "HPOJ"
@@ -13463,17 +12985,18 @@ msgstr ""
 
 #: printer/printerdrake.pm:2438
 #, c-format
-msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
+"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: printer/printerdrake.pm:2457
-#: printer/printerdrake.pm:2603
+#: printer/printerdrake.pm:2457 printer/printerdrake.pm:2603
 #, c-format
 msgid "Installing %s package..."
 msgstr "正在安裝套件 %s..."
 
-#: printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2610
+#: printer/printerdrake.pm:2464 printer/printerdrake.pm:2610
 #, c-format
 msgid "Only printing will be possible on the %s."
 msgstr ""
@@ -13488,8 +13011,7 @@ msgstr ""
 msgid "Please remove the file manually and restart HPOJ."
 msgstr ""
 
-#: printer/printerdrake.pm:2489
-#: printer/printerdrake.pm:2620
+#: printer/printerdrake.pm:2489 printer/printerdrake.pm:2620
 #, c-format
 msgid "Checking device and configuring %s..."
 msgstr "正在檢查與設定 %s 中..."
@@ -13499,14 +13021,12 @@ msgstr "正在檢查與設定 %s 中..."
 msgid "Which printer do you want to set up with HPLIP?"
 msgstr "您要用 HPLIP 設定那個印表機？"
 
-#: printer/printerdrake.pm:2551
-#: printer/printerdrake.pm:2664
+#: printer/printerdrake.pm:2551 printer/printerdrake.pm:2664
 #, c-format
 msgid "Installing SANE packages..."
 msgstr "正在安裝套件 SANE..."
 
-#: printer/printerdrake.pm:2564
-#: printer/printerdrake.pm:2677
+#: printer/printerdrake.pm:2564 printer/printerdrake.pm:2677
 #, c-format
 msgid "Scanning on the %s will not be possible."
 msgstr ""
@@ -13546,26 +13066,23 @@ msgstr "設定裝置中..."
 msgid "Making printer port available for CUPS..."
 msgstr ""
 
-#: printer/printerdrake.pm:2801
-#: printer/printerdrake.pm:3070
-#: printer/printerdrake.pm:3223
+#: printer/printerdrake.pm:2801 printer/printerdrake.pm:3075
+#: printer/printerdrake.pm:3228
 #, c-format
 msgid "Reading printer database..."
 msgstr "正在讀取印表機資料 ..."
 
-#: printer/printerdrake.pm:3028
+#: printer/printerdrake.pm:3033
 #, c-format
 msgid "Enter Printer Name and Comments"
 msgstr "輸入印表機名稱及註解"
 
-#: printer/printerdrake.pm:3032
-#: printer/printerdrake.pm:4355
+#: printer/printerdrake.pm:3037 printer/printerdrake.pm:4360
 #, c-format
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr "印表機的名稱應該只包含英文字母、數字與底線這類字元"
 
-#: printer/printerdrake.pm:3038
-#: printer/printerdrake.pm:4360
+#: printer/printerdrake.pm:3043 printer/printerdrake.pm:4365
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
@@ -13574,179 +13091,198 @@ msgstr ""
 "這台 \"%s\" 印表機已經存在了, \n"
 "您確定要覆蓋這台印表機的組態設定嗎？"
 
-#: printer/printerdrake.pm:3045
+#: printer/printerdrake.pm:3050
 #, c-format
-msgid "The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?"
+msgid ""
+"The printer name \"%s\" has more than 12 characters which can make the "
+"printer unaccessible from Windows clients. Do you really want to use this "
+"name?"
 msgstr ""
 
-#: printer/printerdrake.pm:3054
+#: printer/printerdrake.pm:3059
 #, c-format
-msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
 "每一個印表機都需要指定一個名稱 (比方像是 printer)。\n"
 "至於描述與位置欄位可以不必填入，因為這些欄位是註解。"
 
-#: printer/printerdrake.pm:3055
+#: printer/printerdrake.pm:3060
 #, c-format
 msgid "Name of printer"
 msgstr "印表機名稱"
 
-#: printer/printerdrake.pm:3056
-#: standalone/drakconnect:592
-#: standalone/harddrake2:39
-#: standalone/printerdrake:224
+#: printer/printerdrake.pm:3061 standalone/drakconnect:592
+#: standalone/harddrake2:39 standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Description"
 msgstr "描述"
 
-#: printer/printerdrake.pm:3057
-#: standalone/printerdrake:224
+#: printer/printerdrake.pm:3062 standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "Location"
 msgstr "位置"
 
-#: printer/printerdrake.pm:3075
+#: printer/printerdrake.pm:3080
 #, c-format
 msgid "Preparing printer database..."
 msgstr "正在準備印表機資料"
 
-#: printer/printerdrake.pm:3201
+#: printer/printerdrake.pm:3206
 #, c-format
 msgid "Your printer model"
 msgstr "您的印表機型號"
 
-#: printer/printerdrake.pm:3202
+#: printer/printerdrake.pm:3207
 #, c-format
 msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
 "\n"
 "For your printer Printerdrake has found:\n"
 "\n"
 "%s"
 msgstr ""
-"PrinterDrake 程式已經比較了現有資料庫內以及自動偵測的結果, 以便於能夠找出最適用的印表機類型。這個結果可能有問題, 尤其您的印表機的項目並沒有登記在目前已知的資料庫內時, 所以請檢視這個結果是否正確, 必要時請選擇「手動選擇型號」項目挑選出正確的型號項目。\n"
+"PrinterDrake 程式已經比較了現有資料庫內以及自動偵測的結果, 以便於能夠找出最適"
+"用的印表機類型。這個結果可能有問題, 尤其您的印表機的項目並沒有登記在目前已知"
+"的資料庫內時, 所以請檢視這個結果是否正確, 必要時請選擇「手動選擇型號」項目挑"
+"選出正確的型號項目。\n"
 "\n"
 "目前 PrinterDrake 程式所找到的印表機項目如下：\n"
 "\n"
 "%s"
 
-#: printer/printerdrake.pm:3207
-#: printer/printerdrake.pm:3210
+#: printer/printerdrake.pm:3212 printer/printerdrake.pm:3215
 #, c-format
 msgid "The model is correct"
 msgstr "該型號正確"
 
-#: printer/printerdrake.pm:3208
-#: printer/printerdrake.pm:3209
-#: printer/printerdrake.pm:3212
+#: printer/printerdrake.pm:3213 printer/printerdrake.pm:3214
+#: printer/printerdrake.pm:3217
 #, c-format
 msgid "Select model manually"
 msgstr "手動選擇型號"
 
-#: printer/printerdrake.pm:3236
+#: printer/printerdrake.pm:3241
 #, c-format
 msgid ""
 "\n"
 "\n"
-"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
 "\n"
 "\n"
 "請檢視 PrinterDrake 程式所自動偵測到的印表機型號是否正確。\n"
 "您也可以尋找檢視下面的印表機清單。"
 
-#: printer/printerdrake.pm:3255
+#: printer/printerdrake.pm:3260
 #, c-format
 msgid "Install a manufacturer-supplied PPD file"
 msgstr ""
 
-#: printer/printerdrake.pm:3287
+#: printer/printerdrake.pm:3292
 #, c-format
-msgid "Every PostScript printer is delivered with a PPD file which describes the printer's options and features."
+msgid ""
+"Every PostScript printer is delivered with a PPD file which describes the "
+"printer's options and features."
 msgstr ""
 
-#: printer/printerdrake.pm:3288
+#: printer/printerdrake.pm:3293
 #, c-format
-msgid "This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer."
+msgid ""
+"This file is usually somewhere on the CD with the Windows and Mac drivers "
+"delivered with the printer."
 msgstr ""
 
-#: printer/printerdrake.pm:3289
+#: printer/printerdrake.pm:3294
 #, c-format
 msgid "You can find the PPD files also on the manufacturer's web sites."
 msgstr ""
 
-#: printer/printerdrake.pm:3290
+#: printer/printerdrake.pm:3295
 #, c-format
-msgid "If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too."
+msgid ""
+"If you have Windows installed on your machine, you can find the PPD file on "
+"your Windows partition, too."
 msgstr ""
 
-#: printer/printerdrake.pm:3291
+#: printer/printerdrake.pm:3296
 #, c-format
-msgid "Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware"
+msgid ""
+"Installing the printer's PPD file and using it when setting up the printer "
+"makes all options of the printer available which are provided by the "
+"printer's hardware"
 msgstr ""
 
-#: printer/printerdrake.pm:3292
+#: printer/printerdrake.pm:3297
 #, c-format
-msgid "Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."
+msgid ""
+"Here you can choose the PPD file to be installed on your machine, it will "
+"then be used for the setup of your printer."
 msgstr ""
 
-#: printer/printerdrake.pm:3294
+#: printer/printerdrake.pm:3299
 #, c-format
 msgid "Install PPD file from"
 msgstr "安裝 PPD 的來源："
 
-#: printer/printerdrake.pm:3297
-#: printer/printerdrake.pm:3305
-#: standalone/scannerdrake:183
-#: standalone/scannerdrake:192
-#: standalone/scannerdrake:242
-#: standalone/scannerdrake:250
+#: printer/printerdrake.pm:3302 printer/printerdrake.pm:3310
+#: standalone/scannerdrake:183 standalone/scannerdrake:192
+#: standalone/scannerdrake:242 standalone/scannerdrake:250
 #, c-format
 msgid "Floppy Disk"
 msgstr "磁碟片"
 
-#: printer/printerdrake.pm:3298
-#: printer/printerdrake.pm:3307
-#: standalone/scannerdrake:184
-#: standalone/scannerdrake:194
-#: standalone/scannerdrake:243
-#: standalone/scannerdrake:252
+#: printer/printerdrake.pm:3303 printer/printerdrake.pm:3312
+#: standalone/scannerdrake:184 standalone/scannerdrake:194
+#: standalone/scannerdrake:243 standalone/scannerdrake:252
 #, c-format
 msgid "Other place"
 msgstr "其他地方"
 
-#: printer/printerdrake.pm:3313
+#: printer/printerdrake.pm:3318
 #, c-format
 msgid "Select PPD file"
 msgstr "選擇 PPD 檔案"
 
-#: printer/printerdrake.pm:3317
+#: printer/printerdrake.pm:3322
 #, c-format
 msgid "The PPD file %s does not exist or is unreadable!"
 msgstr ""
 
-#: printer/printerdrake.pm:3323
+#: printer/printerdrake.pm:3328
 #, c-format
 msgid "The PPD file %s does not conform with the PPD specifications!"
 msgstr ""
 
-#: printer/printerdrake.pm:3334
+#: printer/printerdrake.pm:3339
 #, c-format
 msgid "Installing PPD file..."
 msgstr "正在安裝 PPD 檔案..."
 
-#: printer/printerdrake.pm:3452
+#: printer/printerdrake.pm:3457
 #, c-format
 msgid "OKI winprinter configuration"
 msgstr "OKI Windows 印表機設定"
 
-#: printer/printerdrake.pm:3453
+#: printer/printerdrake.pm:3458
 #, c-format
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
 "您目前是設定使用 OKI 雷射印表機項目。這類的印表機\n"
 "使用一種很特殊的傳輸溝通協定, 因此這類印表機一定要\n"
@@ -13755,24 +13291,35 @@ msgstr ""
 "第一個連接埠上, 以便於才能夠正在列印測試頁內容。\n"
 "否則列印功能將會無法正常工作。"
 
-#: printer/printerdrake.pm:3478
-#: printer/printerdrake.pm:3508
+#: printer/printerdrake.pm:3483 printer/printerdrake.pm:3513
 #, c-format
 msgid "Lexmark inkjet configuration"
 msgstr "Lexmark 噴墨印表機設定"
 
-#: printer/printerdrake.pm:3479
+#: printer/printerdrake.pm:3484
 #, c-format
-msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 "Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n"
 "的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n"
 "印表機已經正確連結到您本地端電腦上, 設定該印表機的\n"
 "連結位置。"
 
-#: printer/printerdrake.pm:3509
+#: printer/printerdrake.pm:3514
 #, c-format
-msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
 "若是希望能夠使用這台 Lexmark 噴墨印表機進行列印的話\n"
 "您需要由 Lexmark 網站 (http://www.lexmark.com) 首頁上\n"
@@ -13785,96 +13332,119 @@ msgstr ""
 "的設定。然後使用 \"lexmarkmaintain\" 程式項目來列印噴頭\n"
 "校正的工作設定。"
 
-#: printer/printerdrake.pm:3519
+#: printer/printerdrake.pm:3524
 #, c-format
 msgid "Lexmark X125 configuration"
 msgstr "Lexmark X125 多功能事務機設定"
 
-#: printer/printerdrake.pm:3520
+#: printer/printerdrake.pm:3525
 #, c-format
-msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to."
-msgstr "這個印表機驅動程式只有支援由 USB 連接的本機印表機，而非遠端主機的印表機或列印伺服器。請將印表機連接到本機的 USB 或從它所連接的機器上設定它。"
+msgid ""
+"The driver for this printer only supports printers locally connected via "
+"USB, no printers on remote machines or print server boxes. Please connect "
+"your printer to a local USB port or configure it on the machine where it is "
+"connected to."
+msgstr ""
+"這個印表機驅動程式只有支援由 USB 連接的本機印表機，而非遠端主機的印表機或列印"
+"伺服器。請將印表機連接到本機的 USB 或從它所連接的機器上設定它。"
 
-#: printer/printerdrake.pm:3542
+#: printer/printerdrake.pm:3547
 #, c-format
 msgid "Samsung ML/QL-85G configuration"
 msgstr "Samsung ML/QL-85G 設定"
 
-#: printer/printerdrake.pm:3543
-#: printer/printerdrake.pm:3570
+#: printer/printerdrake.pm:3548 printer/printerdrake.pm:3575
 #, c-format
-msgid "The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."
-msgstr "這個印表機驅動程式只有支援由第一個平行埠連接的本機印表機，而非遠端主機的印表機或列印伺服器。請將印表機連接到本機的第一個平行埠或從它所連接的機器上設定它。"
+msgid ""
+"The driver for this printer only supports printers locally connected on the "
+"first parallel port, no printers on remote machines or print server boxes or "
+"on other parallel ports. Please connect your printer to the first parallel "
+"port or configure it on the machine where it is connected to."
+msgstr ""
+"這個印表機驅動程式只有支援由第一個平行埠連接的本機印表機，而非遠端主機的印表"
+"機或列印伺服器。請將印表機連接到本機的第一個平行埠或從它所連接的機器上設定"
+"它。"
 
-#: printer/printerdrake.pm:3569
+#: printer/printerdrake.pm:3574
 #, c-format
 msgid "Canon LBP-460/660 configuration"
 msgstr "Canon LBP-460/660 設定"
 
-#: printer/printerdrake.pm:3596
+#: printer/printerdrake.pm:3601
 #, c-format
 msgid "Canon LBP-810/1120 (CAPT) configuration"
 msgstr "Canon LBP-810/1120 (CAPT) 設定"
 
-#: printer/printerdrake.pm:3597
+#: printer/printerdrake.pm:3602
 #, c-format
-msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes or on the parallel port. Please connect your printer to the USB or configure it on the machine where it is directly connected to."
-msgstr "這個印表機驅動程式只有支援由 USB 連接的本機印表機，而非遠端主機的印表機或列印伺服器。請將印表機連接到本機的 USB 或從它所連接的機器上設定它。"
+msgid ""
+"The driver for this printer only supports printers locally connected via "
+"USB, no printers on remote machines or print server boxes or on the parallel "
+"port. Please connect your printer to the USB or configure it on the machine "
+"where it is directly connected to."
+msgstr ""
+"這個印表機驅動程式只有支援由 USB 連接的本機印表機，而非遠端主機的印表機或列印"
+"伺服器。請將印表機連接到本機的 USB 或從它所連接的機器上設定它。"
 
-#: printer/printerdrake.pm:3604
+#: printer/printerdrake.pm:3609
 #, c-format
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: printer/printerdrake.pm:3754
+#: printer/printerdrake.pm:3759
 #, c-format
 msgid ""
 "Printer default settings\n"
 "\n"
-"You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
 msgstr ""
 "預設印表機設定\n"
 "\n"
 "您需要確定紙張的大小與墨水的種類設定都正確無誤。\n"
 "請注意一下, 當使用高品質列印時所花費的時間會越久。"
 
-#: printer/printerdrake.pm:3879
+#: printer/printerdrake.pm:3884
 #, c-format
 msgid "Printer default settings"
 msgstr "印表機型號選擇"
 
-#: printer/printerdrake.pm:3886
+#: printer/printerdrake.pm:3891
 #, c-format
 msgid "Option %s must be an integer number!"
 msgstr "%s 參數需要為整數!"
 
-#: printer/printerdrake.pm:3890
+#: printer/printerdrake.pm:3895
 #, c-format
 msgid "Option %s must be a number!"
 msgstr "%s 選項一定要為數字!"
 
-#: printer/printerdrake.pm:3894
+#: printer/printerdrake.pm:3899
 #, c-format
 msgid "Option %s out of range!"
 msgstr "%s 參數超出允許範圍！"
 
-#: printer/printerdrake.pm:3946
+#: printer/printerdrake.pm:3951
 #, c-format
 msgid ""
 "Do you want to set this printer (\"%s\")\n"
 "as the default printer?"
 msgstr "您要使用這台印表機 (\"%s\") 為預設印表機嗎？"
 
-#: printer/printerdrake.pm:3962
+#: printer/printerdrake.pm:3967
 #, c-format
 msgid "Test pages"
 msgstr "列印測試頁"
 
-#: printer/printerdrake.pm:3963
+#: printer/printerdrake.pm:3968
 #, c-format
 msgid ""
 "Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
 msgstr ""
 "您選取你要列印的測試頁。\n"
 "注意: 圖形測試頁會花費比較久的時間來列印, \n"
@@ -13882,48 +13452,47 @@ msgstr ""
 "能夠會需要花費更久時間。\n"
 "一般情況來說, 選擇標準的測試頁就很足夠了。"
 
-#: printer/printerdrake.pm:3967
+#: printer/printerdrake.pm:3972
 #, c-format
 msgid "No test pages"
 msgstr "不列印測試頁"
 
-#: printer/printerdrake.pm:3968
+#: printer/printerdrake.pm:3973
 #, c-format
 msgid "Print"
 msgstr "列印"
 
-#: printer/printerdrake.pm:3993
+#: printer/printerdrake.pm:3998
 #, c-format
 msgid "Standard test page"
 msgstr "標準列印測試頁"
 
-#: printer/printerdrake.pm:3996
+#: printer/printerdrake.pm:4001
 #, c-format
 msgid "Alternative test page (Letter)"
 msgstr "Letter 紙張列印測試頁"
 
-#: printer/printerdrake.pm:3999
+#: printer/printerdrake.pm:4004
 #, c-format
 msgid "Alternative test page (A4)"
 msgstr "A4 紙張列印測試頁"
 
-#: printer/printerdrake.pm:4001
+#: printer/printerdrake.pm:4006
 #, c-format
 msgid "Photo test page"
 msgstr "圖形列印測試頁"
 
-#: printer/printerdrake.pm:4014
-#: printer/printerdrake.pm:4198
+#: printer/printerdrake.pm:4019 printer/printerdrake.pm:4203
 #, c-format
 msgid "Printing test page(s)..."
 msgstr "正在列印測試頁..."
 
-#: printer/printerdrake.pm:4034
+#: printer/printerdrake.pm:4039
 #, c-format
 msgid "Skipping photo test page."
 msgstr "略過照片列印測試頁"
 
-#: printer/printerdrake.pm:4051
+#: printer/printerdrake.pm:4056
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -13938,7 +13507,7 @@ msgstr ""
 "%s\n"
 "\n"
 
-#: printer/printerdrake.pm:4055
+#: printer/printerdrake.pm:4060
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -13947,20 +13516,23 @@ msgstr ""
 "測試頁已經被送到列印伺服程式了, 接著可能需要花\n"
 "一點時間, 印表機才會把結果印出來。\n"
 
-#: printer/printerdrake.pm:4065
+#: printer/printerdrake.pm:4070
 #, c-format
 msgid "Did it work properly?"
 msgstr "列印正常嗎？"
 
-#: printer/printerdrake.pm:4089
-#: printer/printerdrake.pm:5472
+#: printer/printerdrake.pm:4094 printer/printerdrake.pm:5496
 #, c-format
 msgid "Raw printer"
 msgstr "Raw 印表機"
 
-#: printer/printerdrake.pm:4127
+#: printer/printerdrake.pm:4132
 #, c-format
-msgid "To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
 "要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \n"
 "\"%s <檔案名稱>\"\n"
@@ -13971,37 +13543,42 @@ msgstr ""
 "即可。您可以透過圖型介面程式簡單的選擇印表機項目, \n"
 "包含修改相關的列印選項。\n"
 
-#: printer/printerdrake.pm:4129
+#: printer/printerdrake.pm:4134
 #, c-format
-msgid "These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
-"這個指令功能, 其實您也可以在許多應用程式列印對話方塊的 \"列印命令\" 使用它。\n"
+"這個指令功能, 其實您也可以在許多應用程式列印對話方塊的 \"列印命令\" 使用"
+"它。\n"
 "但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由相關應用程式提供。\n"
 
-#: printer/printerdrake.pm:4132
-#: printer/printerdrake.pm:4149
-#: printer/printerdrake.pm:4159
+#: printer/printerdrake.pm:4137 printer/printerdrake.pm:4154
+#: printer/printerdrake.pm:4164
 #, c-format
 msgid ""
 "\n"
-"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 "\n"
 "「%s」指令, 能夠讓您修改某個設定列印工作項目的參數設定。\n"
 "簡單一點的方式就是在命令列加上您要填入的設定值, 比方「%s <檔案>」。 "
 
-#: printer/printerdrake.pm:4135
-#: printer/printerdrake.pm:4175
+#: printer/printerdrake.pm:4140 printer/printerdrake.pm:4180
 #, c-format
 msgid ""
-"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
 "\n"
 msgstr ""
 "要獲得目前這台印表機可用的相關參數選項, 或者是查看下面清單\n"
 "所顯示的項目, 請點選點選『列印選項清單』按鈕。%s%s%s\n"
 "\n"
 
-#: printer/printerdrake.pm:4139
+#: printer/printerdrake.pm:4144
 #, c-format
 msgid ""
 "Here is a list of the available printing options for the current printer:\n"
@@ -14010,180 +13587,230 @@ msgstr ""
 "下面包含了目前印表機支援的選項清單:\n"
 "\n"
 
-#: printer/printerdrake.pm:4144
-#: printer/printerdrake.pm:4154
+#: printer/printerdrake.pm:4149 printer/printerdrake.pm:4159
 #, c-format
-msgid "To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
-msgstr "要在命令列環境(終端機視窗)列印檔案的話, 您可以執行這個指令 \"%s <檔案>\".\n"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"要在命令列環境(終端機視窗)列印檔案的話, 您可以執行這個指令 \"%s <檔案>\".\n"
 
-#: printer/printerdrake.pm:4146
-#: printer/printerdrake.pm:4156
-#: printer/printerdrake.pm:4166
+#: printer/printerdrake.pm:4151 printer/printerdrake.pm:4161
+#: printer/printerdrake.pm:4171
 #, c-format
-msgid "This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
 "這個指令功能, 其實您也可以在許多應用程式列印對話方塊的\n"
 "『列印命令』使用它。\n"
 "但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由\n"
 "相關應用程式提供。\n"
 
-#: printer/printerdrake.pm:4151
-#: printer/printerdrake.pm:4161
+#: printer/printerdrake.pm:4156 printer/printerdrake.pm:4166
 #, c-format
-msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
-msgstr "要獲得目前這台印表機可用的相關參數選項, 請點選 \"Print option list 印表機選項表\"按鈕."
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
+"要獲得目前這台印表機可用的相關參數選項, 請點選 \"Print option list 印表機選項"
+"表\"按鈕."
 
-#: printer/printerdrake.pm:4164
+#: printer/printerdrake.pm:4169
 #, c-format
-msgid "To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
-msgstr "要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \"%s <檔案>\" 或者是 \"%s <檔案>\"。\n"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \"%s <檔案>\" 或者是 "
+"\"%s <檔案>\"。\n"
 
-#: printer/printerdrake.pm:4168
+#: printer/printerdrake.pm:4173
 #, c-format
 msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
 msgstr ""
 "您也可以使用圖形介面 \"xpdq\" 來設定選項處理列印工作.\n"
-"如果您目前是使用 KDE 桌面環境的話, 你有一個 \"panic button 恐慌按鈕\" 圖示在桌面上, 標示為 \"STOP Printer! 停止印表機!\" 以停止全部的列印工作, 當你按下它時. 這對如卡紙來說十分有用.\n"
+"如果您目前是使用 KDE 桌面環境的話, 你有一個 \"panic button 恐慌按鈕\" 圖示在"
+"桌面上, 標示為 \"STOP Printer! 停止印表機!\" 以停止全部的列印工作, 當你按下它"
+"時. 這對如卡紙來說十分有用.\n"
 
-#: printer/printerdrake.pm:4172
+#: printer/printerdrake.pm:4177
 #, c-format
 msgid ""
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
 msgstr ""
 "\n"
 "\"%s\" 與 \"%s\" 指令, 能夠讓您修改某個設定列印工作項目\n"
 "的參數設定。簡單一點的方式就是在命令列加上您要填入的設定值, \n"
 "比方 \"%s <檔案>\"。\n"
 
-#: printer/printerdrake.pm:4182
+#: printer/printerdrake.pm:4187
 #, c-format
 msgid "Printing/Scanning/Photo Cards on \"%s\""
 msgstr ""
 
-#: printer/printerdrake.pm:4183
+#: printer/printerdrake.pm:4188
 #, c-format
 msgid "Printing/Scanning on \"%s\""
 msgstr ""
 
-#: printer/printerdrake.pm:4185
+#: printer/printerdrake.pm:4190
 #, c-format
 msgid "Printing/Photo Card Access on \"%s\""
 msgstr ""
 
-#: printer/printerdrake.pm:4187
+#: printer/printerdrake.pm:4192
 #, c-format
 msgid "Using/Maintaining the printer \"%s\""
 msgstr "使用/維護 \"%s\" 印表機"
 
-#: printer/printerdrake.pm:4188
+#: printer/printerdrake.pm:4193
 #, c-format
 msgid "Printing on the printer \"%s\""
 msgstr "使用「%s」印表機進行列印"
 
-#: printer/printerdrake.pm:4194
+#: printer/printerdrake.pm:4199
 #, c-format
 msgid "Print option list"
 msgstr "列印選項清單"
 
-#: printer/printerdrake.pm:4216
+#: printer/printerdrake.pm:4221
 #, c-format
 msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n"
+"Your %s is set up with HP's HPLIP driver software. This way many special "
+"features of your printer are supported.\n"
 "\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4219
+#: printer/printerdrake.pm:4224
 #, c-format
-msgid "The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). "
+msgid ""
+"The scanner in your printer can be used with the usual SANE software, for "
+"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
 msgstr ""
 
-#: printer/printerdrake.pm:4220
+#: printer/printerdrake.pm:4225
 #, c-format
 msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to share your scanner on the network.\n"
+"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
+"share your scanner on the network.\n"
 "\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4224
+#: printer/printerdrake.pm:4229
 #, c-format
-msgid "The memory card readers in your printer can be accessed like a usual USB mass storage device. "
+msgid ""
+"The memory card readers in your printer can be accessed like a usual USB "
+"mass storage device. "
 msgstr ""
 
-#: printer/printerdrake.pm:4225
+#: printer/printerdrake.pm:4230
 #, c-format
 msgid ""
-"After inserting a card a hard disk icon to access the card should appear on your desktop.\n"
+"After inserting a card a hard disk icon to access the card should appear on "
+"your desktop.\n"
 "\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4227
+#: printer/printerdrake.pm:4232
 #, c-format
-msgid "The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. "
+msgid ""
+"The memory card readers in your printer can be accessed using HP's Printer "
+"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
+"Photo Cards...\" button on the \"Functions\" tab. "
 msgstr ""
 
-#: printer/printerdrake.pm:4228
+#: printer/printerdrake.pm:4233
 #, c-format
 msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n"
+"Note that this is very slow, reading the pictures from the camera or a USB "
+"card reader is usually faster.\n"
 "\n"
 msgstr ""
 "請注意這將花費許多時間，由數位相機或 USB 讀卡機讀取圖片通常會較快。\n"
 "\n"
 
-#: printer/printerdrake.pm:4231
+#: printer/printerdrake.pm:4236
 #, c-format
 msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n"
+"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
+"lot of status monitoring and maintenance functions for your %s:\n"
 "\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4232
+#: printer/printerdrake.pm:4237
 #, c-format
 msgid " - Ink level/status info\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4233
+#: printer/printerdrake.pm:4238
 #, c-format
 msgid " - Ink nozzle cleaning\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4234
+#: printer/printerdrake.pm:4239
 #, c-format
 msgid " - Print head alignment\n"
 msgstr ""
 
-#: printer/printerdrake.pm:4235
+#: printer/printerdrake.pm:4240
 #, c-format
 msgid " - Color calibration\n"
 msgstr " - 色彩校正\n"
 
-#: printer/printerdrake.pm:4250
+#: printer/printerdrake.pm:4255
 #, c-format
 msgid ""
-"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this device, you only need to use \"scannerdrake\" if you want to share the scanner on the network."
+"You do not need to run \"scannerdrake\" for setting up scanning on this "
+"device, you only need to use \"scannerdrake\" if you want to share the "
+"scanner on the network."
 msgstr ""
 
-#: printer/printerdrake.pm:4276
+#: printer/printerdrake.pm:4281
 #, c-format
-msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists."
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
 
-#: printer/printerdrake.pm:4319
-#: printer/printerdrake.pm:4346
-#: printer/printerdrake.pm:4381
+#: printer/printerdrake.pm:4324 printer/printerdrake.pm:4351
+#: printer/printerdrake.pm:4386
 #, c-format
 msgid "Transfer printer configuration"
 msgstr "印表機傳送設定"
 
-#: printer/printerdrake.pm:4320
+#: printer/printerdrake.pm:4325
 #, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n"
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
 "Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
 "若是您已經設定過 %s spooler 印表機項目的話, 您可以很簡單\n"
@@ -14192,43 +13819,50 @@ msgstr ""
 "不過不包含傳送要列印的工作項目功能。\n"
 "另外並不是所有的列印工作都能夠被傳輸過來, 因為下面原因：\n"
 
-#: printer/printerdrake.pm:4323
+#: printer/printerdrake.pm:4328
 #, c-format
-msgid "CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
 "CUPS 目前並不支援位於Novell主機上的印表機, 包含不使用free-formed\n"
 "命令傳送列印資料的印表機。\n"
 
-#: printer/printerdrake.pm:4325
+#: printer/printerdrake.pm:4330
 #, c-format
-msgid "PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 "PDQ 僅支援本地端印表機, 或者是遠端 LPD 的印表機, 以及\n"
 "TCP/Socket 印表機類型。\n"
 
-#: printer/printerdrake.pm:4327
+#: printer/printerdrake.pm:4332
 #, c-format
 msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr "PD 與 LPRng 不支援 IPP 類型的印表機。\n"
 
-#: printer/printerdrake.pm:4329
+#: printer/printerdrake.pm:4334
 #, c-format
-msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
 msgstr ""
 "除此之外, queues 無法透過該程式建立, 或者是 \"foomatic-configure\"\n"
 "無法進行傳輸。"
 
-#: printer/printerdrake.pm:4330
+#: printer/printerdrake.pm:4335
 #, c-format
 msgid ""
 "\n"
-"Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred."
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
 "\n"
 "透過廠商所提供的 PPD 檔案內容或者是原始性的 CUPS 驅動程式\n"
 "設定的印表機無法被進行轉換動作."
 
-#: printer/printerdrake.pm:4331
+#: printer/printerdrake.pm:4336
 #, c-format
 msgid ""
 "\n"
@@ -14238,18 +13872,17 @@ msgstr ""
 "\n"
 "請點選標記您要傳送的印表機項目, 然後點選 \"傳送\" 即可。"
 
-#: printer/printerdrake.pm:4334
+#: printer/printerdrake.pm:4339
 #, c-format
 msgid "Do not transfer printers"
 msgstr "不傳送印表機"
 
-#: printer/printerdrake.pm:4335
-#: printer/printerdrake.pm:4351
+#: printer/printerdrake.pm:4340 printer/printerdrake.pm:4356
 #, c-format
 msgid "Transfer"
 msgstr "傳送"
 
-#: printer/printerdrake.pm:4347
+#: printer/printerdrake.pm:4352
 #, c-format
 msgid ""
 "A printer named \"%s\" already exists under %s. \n"
@@ -14260,95 +13893,117 @@ msgstr ""
 "請點選『傳送』覆蓋內容。\n"
 "您也可以另外輸入一個名稱, 或者是略過這台印表機。"
 
-#: printer/printerdrake.pm:4368
+#: printer/printerdrake.pm:4373
 #, c-format
 msgid "New printer name"
 msgstr "新印表機名稱"
 
-#: printer/printerdrake.pm:4371
+#: printer/printerdrake.pm:4376
 #, c-format
 msgid "Transferring %s..."
 msgstr "正在傳送 %s ..."
 
-#: printer/printerdrake.pm:4382
+#: printer/printerdrake.pm:4387
 #, c-format
-msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
 msgstr ""
 
-#: printer/printerdrake.pm:4392
+#: printer/printerdrake.pm:4397
 #, c-format
 msgid "Refreshing printer data..."
 msgstr "正在更新印表機資料 ..."
 
-#: printer/printerdrake.pm:4402
+#: printer/printerdrake.pm:4407
 #, c-format
 msgid "Starting network..."
 msgstr "啟動網路中 ..."
 
-#: printer/printerdrake.pm:4446
-#: printer/printerdrake.pm:4450
-#: printer/printerdrake.pm:4452
+#: printer/printerdrake.pm:4451 printer/printerdrake.pm:4455
+#: printer/printerdrake.pm:4457
 #, c-format
 msgid "Configure the network now"
 msgstr "立即設定網路"
 
-#: printer/printerdrake.pm:4447
+#: printer/printerdrake.pm:4452
 #, c-format
 msgid "Network functionality not configured"
 msgstr "目前網路功能尚未設定"
 
-#: printer/printerdrake.pm:4448
+#: printer/printerdrake.pm:4453
 #, c-format
-msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"
-msgstr "您目前要開始設定遠端印表機列印的項目。要進行此項目設定的前提, 您的系統需要具備網路功能以便於進行存取動作, 但是目前網路尚未設定。如果您打算略過網路設定項目繼續進行下面的步驟的話, 關於設定使用遠端印表機功能的項目將無法設定。您打算要怎麼作呢？"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"您目前要開始設定遠端印表機列印的項目。要進行此項目設定的前提, 您的系統需要具"
+"備網路功能以便於進行存取動作, 但是目前網路尚未設定。如果您打算略過網路設定項"
+"目繼續進行下面的步驟的話, 關於設定使用遠端印表機功能的項目將無法設定。您打算"
+"要怎麼作呢？"
 
-#: printer/printerdrake.pm:4451
+#: printer/printerdrake.pm:4456
 #, c-format
 msgid "Go on without configuring the network"
 msgstr "略過網路設定項目繼續進行下面的步驟"
 
-#: printer/printerdrake.pm:4482
+#: printer/printerdrake.pm:4487
 #, c-format
-msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\""
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessible after booting your "
+"system and correct the configuration using the %s Control Center, section "
+"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
+"also using the %s Control Center, section \"Hardware\"/\"Printer\""
 msgstr ""
 "在系統安裝過程中設定的網路服務無法啟動。請在重新啟動系統後檢查網路是否\n"
 "可用，並使用 %s 控制中心選擇『網路』『連線』項目修正設定。後續印表機的\n"
 "設定, 也可以用 %s 控制中心，在『硬體』內的『印表機』項目來進行設定"
 
-#: printer/printerdrake.pm:4483
+#: printer/printerdrake.pm:4488
 #, c-format
-msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again."
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
 msgstr ""
 "網路服務的存取功能並未開啟, 而且也無法啟動這個服務項目。\n"
 "請檢查一下您的設定, 甚至包含您的硬體是否設定正確無誤。\n"
 "當檢查完畢後, 再重新設定遠端列印的相關項目。"
 
-#: printer/printerdrake.pm:4493
+#: printer/printerdrake.pm:4498
 #, c-format
 msgid "Restarting printing system..."
 msgstr "正在重新啟動列印系統服務 ..."
 
-#: printer/printerdrake.pm:4524
+#: printer/printerdrake.pm:4529
 #, c-format
 msgid "high"
 msgstr "高"
 
-#: printer/printerdrake.pm:4524
+#: printer/printerdrake.pm:4529
 #, c-format
 msgid "paranoid"
 msgstr "瘋狂狀態"
 
-#: printer/printerdrake.pm:4526
+#: printer/printerdrake.pm:4531
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "在 %s 安全等級環境下正在安裝列印服務系統項目"
 
-#: printer/printerdrake.pm:4527
+#: printer/printerdrake.pm:4532
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %s security level.\n"
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
 "\n"
-"This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessible by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
 "\n"
 "Do you really want to configure printing on this machine?"
 msgstr ""
@@ -14363,19 +14018,23 @@ msgstr ""
 "\n"
 "您確定要開始設定這台機器上的列印項目設定嗎？"
 
-#: printer/printerdrake.pm:4563
+#: printer/printerdrake.pm:4568
 #, c-format
 msgid "Starting the printing system at boot time"
 msgstr "於開機時啟動列印服務系統"
 
-#: printer/printerdrake.pm:4564
+#: printer/printerdrake.pm:4569
 #, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine is booted.\n"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on again?"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
 "列印服務系統 (%s) 將不會在系統開機時載入。\n"
 "\n"
@@ -14385,183 +14044,201 @@ msgstr ""
 "您希望這邊能夠設定在開機時能夠預設啟動列印\n"
 "服務的項目嗎？"
 
-#: printer/printerdrake.pm:4587
+#: printer/printerdrake.pm:4592
 #, c-format
 msgid "Checking installed software..."
 msgstr "正在檢查已經安裝的軟體"
 
-#: printer/printerdrake.pm:4593
+#: printer/printerdrake.pm:4598
 #, c-format
 msgid "Removing %s..."
 msgstr "正在移除 %s"
 
-#: printer/printerdrake.pm:4597
+#: printer/printerdrake.pm:4602
 #, c-format
 msgid "Could not remove the %s printing system!"
 msgstr "無法移除 %s 列印系統！"
 
-#: printer/printerdrake.pm:4617
+#: printer/printerdrake.pm:4626
 #, c-format
 msgid "Installing %s..."
 msgstr "正在安裝套件 %s..."
 
-#: printer/printerdrake.pm:4621
+#: printer/printerdrake.pm:4630
 #, c-format
 msgid "Could not install the %s printing system!"
 msgstr "無法安裝 %s 列印系統！"
 
-#: printer/printerdrake.pm:4689
+#: printer/printerdrake.pm:4698
 #, c-format
-msgid "In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
+msgid ""
+"In this mode there is no local printing system, all printing requests go "
+"directly to the server specified below. Note that it is not possible to "
+"define local print queues then and if the specified server is down it cannot "
+"be printed at all from this machine."
 msgstr ""
 
-#: printer/printerdrake.pm:4691
+#: printer/printerdrake.pm:4700
 #, c-format
-msgid "Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise."
+msgid ""
+"Enter the host name or IP of your CUPS server and click OK if you want to "
+"use this mode, click \"Quit\" otherwise."
 msgstr ""
 
-#: printer/printerdrake.pm:4705
+#: printer/printerdrake.pm:4714
 #, c-format
 msgid "Name or IP of remote server:"
 msgstr "遠端伺服器的名稱或 IP:"
 
-#: printer/printerdrake.pm:4725
+#: printer/printerdrake.pm:4734
 #, c-format
 msgid "Setting Default Printer..."
 msgstr "設定預設印表機..."
 
-#: printer/printerdrake.pm:4745
+#: printer/printerdrake.pm:4754
 #, c-format
 msgid "Local CUPS printing system or remote CUPS server?"
 msgstr "本機的 CUPS 列印系統或遠端的 CUPS 伺服器？"
 
-#: printer/printerdrake.pm:4746
+#: printer/printerdrake.pm:4755
 #, c-format
 msgid "The CUPS printing system can be used in two ways: "
 msgstr "CUPS 列印系統可以下列兩種方式使用："
 
-#: printer/printerdrake.pm:4748
+#: printer/printerdrake.pm:4757
 #, c-format
 msgid "1. The CUPS printing system can run locally. "
 msgstr "1. CUPS 列印系統可以在本地端執行。"
 
-#: printer/printerdrake.pm:4749
+#: printer/printerdrake.pm:4758
 #, c-format
-msgid "Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. "
+msgid ""
+"Then locally connected printers can be used and remote printers on other "
+"CUPS servers in the same network are automatically discovered. "
 msgstr ""
 
-#: printer/printerdrake.pm:4750
+#: printer/printerdrake.pm:4759
 #, c-format
-msgid "Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. "
+msgid ""
+"Disadvantage of this approach is, that more resources on the local machine "
+"are needed: Additional software packages need to be installed, the CUPS "
+"daemon has to run in the background and needs some memory, and the IPP port "
+"(port 631) is opened. "
 msgstr ""
 
-#: printer/printerdrake.pm:4752
+#: printer/printerdrake.pm:4761
 #, c-format
 msgid "2. All printing requests are immediately sent to a remote CUPS server. "
 msgstr ""
 
-#: printer/printerdrake.pm:4753
+#: printer/printerdrake.pm:4762
 #, c-format
-msgid "Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. "
+msgid ""
+"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
+"started or port opened, no software infrastructure for setting up local "
+"print queues is installed, so less memory and disk space is used. "
 msgstr ""
 
-#: printer/printerdrake.pm:4754
+#: printer/printerdrake.pm:4763
 #, c-format
-msgid "Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. "
+msgid ""
+"Disadvantage is that it is not possible to define local printers then and if "
+"the specified server is down it cannot be printed at all from this machine. "
 msgstr ""
 
-#: printer/printerdrake.pm:4756
+#: printer/printerdrake.pm:4765
 #, c-format
 msgid "How should CUPS be set up on your machine?"
 msgstr "您的 CUPS 系統應該如何設定？"
 
-#: printer/printerdrake.pm:4760
-#: printer/printerdrake.pm:4775
-#: printer/printerdrake.pm:4779
-#: printer/printerdrake.pm:4785
+#: printer/printerdrake.pm:4769 printer/printerdrake.pm:4784
+#: printer/printerdrake.pm:4788 printer/printerdrake.pm:4794
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr ""
 
-#: printer/printerdrake.pm:4774
+#: printer/printerdrake.pm:4783
 #, c-format
 msgid "Local CUPS printing system"
 msgstr "本機的 CUPS 列印系統"
 
-#: printer/printerdrake.pm:4813
+#: printer/printerdrake.pm:4822
 #, c-format
 msgid "Select Printer Spooler"
 msgstr "選擇印表列印系統"
 
-#: printer/printerdrake.pm:4814
+#: printer/printerdrake.pm:4823
 #, c-format
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "您打算用那一套列印系統？"
 
-#: printer/printerdrake.pm:4863
+#: printer/printerdrake.pm:4872
 #, c-format
 msgid "Failed to configure printer \"%s\"!"
 msgstr "無法設定「%s」印表機！"
 
-#: printer/printerdrake.pm:4878
+#: printer/printerdrake.pm:4887
 #, c-format
 msgid "Installing Foomatic..."
 msgstr "正在安裝 Foomatic 套件..."
 
-#: printer/printerdrake.pm:4884
+#: printer/printerdrake.pm:4893
 #, c-format
 msgid "Could not install %s packages, %s cannot be started!"
 msgstr "無法安裝套件 %s，%s 啟動失敗！"
 
-#: printer/printerdrake.pm:5079
+#: printer/printerdrake.pm:5088
 #, c-format
-msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. "
-msgstr "下列的印表機都已經設定好了, 您可以點選其中一個印表機來修改其設定；設定為預設印表機；或查看其資訊。"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it. "
+msgstr ""
+"下列的印表機都已經設定好了, 您可以點選其中一個印表機來修改其設定；設定為預設"
+"印表機；或查看其資訊。"
 
-#: printer/printerdrake.pm:5109
+#: printer/printerdrake.pm:5118
 #, c-format
 msgid "Display all available remote CUPS printers"
 msgstr "顯示所有可用的遠端 CUPS 印表機"
 
-#: printer/printerdrake.pm:5110
+#: printer/printerdrake.pm:5119
 #, c-format
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"
 
-#: printer/printerdrake.pm:5121
+#: printer/printerdrake.pm:5130
 #, c-format
 msgid "CUPS configuration"
 msgstr "CUPS 設定組態"
 
-#: printer/printerdrake.pm:5133
+#: printer/printerdrake.pm:5151
 #, c-format
 msgid "Change the printing system"
 msgstr "變更列印系統"
 
-#: printer/printerdrake.pm:5142
+#: printer/printerdrake.pm:5160
 #, c-format
 msgid "Normal Mode"
 msgstr "一般模式"
 
-#: printer/printerdrake.pm:5143
+#: printer/printerdrake.pm:5161
 #, c-format
 msgid "Expert Mode"
 msgstr "專家模式"
 
-#: printer/printerdrake.pm:5415
-#: printer/printerdrake.pm:5473
-#: printer/printerdrake.pm:5559
-#: printer/printerdrake.pm:5568
+#: printer/printerdrake.pm:5439 printer/printerdrake.pm:5497
+#: printer/printerdrake.pm:5583 printer/printerdrake.pm:5592
 #, c-format
 msgid "Printer options"
 msgstr "印表機選項"
 
-#: printer/printerdrake.pm:5451
+#: printer/printerdrake.pm:5475
 #, c-format
 msgid "Modify printer configuration"
 msgstr "修改印表機設定"
 
-#: printer/printerdrake.pm:5453
+#: printer/printerdrake.pm:5477
 #, c-format
 msgid ""
 "Printer %s%s\n"
@@ -14570,117 +14247,104 @@ msgstr ""
 "印表機 %s%s\n"
 "您要修改這個印表機的那個項目？"
 
-#: printer/printerdrake.pm:5458
+#: printer/printerdrake.pm:5482
 #, c-format
 msgid "This printer is disabled"
 msgstr "這個印表機已經停用了"
 
-#: printer/printerdrake.pm:5460
+#: printer/printerdrake.pm:5484
 #, c-format
 msgid "Do it!"
 msgstr "做吧 !"
 
-#: printer/printerdrake.pm:5465
-#: printer/printerdrake.pm:5527
+#: printer/printerdrake.pm:5489 printer/printerdrake.pm:5551
 #, c-format
 msgid "Printer connection type"
 msgstr "印表機連線方式"
 
-#: printer/printerdrake.pm:5466
-#: printer/printerdrake.pm:5533
+#: printer/printerdrake.pm:5490 printer/printerdrake.pm:5557
 #, c-format
 msgid "Printer name, description, location"
 msgstr "印表機名稱, 描述, 位置"
 
-#: printer/printerdrake.pm:5468
-#: printer/printerdrake.pm:5552
+#: printer/printerdrake.pm:5492 printer/printerdrake.pm:5576
 #, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "印表機廠商,型號,驅動程式"
 
-#: printer/printerdrake.pm:5469
-#: printer/printerdrake.pm:5553
+#: printer/printerdrake.pm:5493 printer/printerdrake.pm:5577
 #, c-format
 msgid "Printer manufacturer, model"
 msgstr "印表機廠商,型號"
 
-#: printer/printerdrake.pm:5475
-#: printer/printerdrake.pm:5563
+#: printer/printerdrake.pm:5499 printer/printerdrake.pm:5587
 #, c-format
 msgid "Set this printer as the default"
 msgstr "使用這台印表機為預設印表機"
 
-#: printer/printerdrake.pm:5480
-#: printer/printerdrake.pm:5569
-#: printer/printerdrake.pm:5571
-#: printer/printerdrake.pm:5580
+#: printer/printerdrake.pm:5504 printer/printerdrake.pm:5593
+#: printer/printerdrake.pm:5595 printer/printerdrake.pm:5604
 #, c-format
 msgid "Enable Printer"
 msgstr "啟用印表機"
 
-#: printer/printerdrake.pm:5483
-#: printer/printerdrake.pm:5574
-#: printer/printerdrake.pm:5575
-#: printer/printerdrake.pm:5577
+#: printer/printerdrake.pm:5507 printer/printerdrake.pm:5598
+#: printer/printerdrake.pm:5599 printer/printerdrake.pm:5601
 #, c-format
 msgid "Disable Printer"
 msgstr "停用印表機"
 
-#: printer/printerdrake.pm:5487
-#: printer/printerdrake.pm:5581
+#: printer/printerdrake.pm:5511 printer/printerdrake.pm:5605
 #, fuzzy, c-format
 msgid "Printer communication error handling"
 msgstr "印表機連線方式"
 
-#: printer/printerdrake.pm:5488
-#: printer/printerdrake.pm:5585
+#: printer/printerdrake.pm:5512 printer/printerdrake.pm:5609
 #, c-format
 msgid "Print test pages"
 msgstr "列印測試頁"
 
-#: printer/printerdrake.pm:5489
-#: printer/printerdrake.pm:5587
+#: printer/printerdrake.pm:5513 printer/printerdrake.pm:5611
 #, c-format
 msgid "Learn how to use this printer"
 msgstr "瞭解如何使用這台印表機"
 
-#: printer/printerdrake.pm:5490
-#: printer/printerdrake.pm:5589
+#: printer/printerdrake.pm:5514 printer/printerdrake.pm:5613
 #, c-format
 msgid "Remove printer"
 msgstr "移除印表機"
 
-#: printer/printerdrake.pm:5541
+#: printer/printerdrake.pm:5565
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "正在刪除舊的印表機 \"%s\" ..."
 
-#: printer/printerdrake.pm:5572
+#: printer/printerdrake.pm:5596
 #, c-format
 msgid "Printer \"%s\" is now enabled."
 msgstr "\"%s\" 印表機現在啟用了。"
 
-#: printer/printerdrake.pm:5578
+#: printer/printerdrake.pm:5602
 #, c-format
 msgid "Printer \"%s\" is now disabled."
 msgstr "\"%s\" 印表機現在停用了。"
 
-#: printer/printerdrake.pm:5620
+#: printer/printerdrake.pm:5644
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "您確定要刪除印表機 \"%s\" 嗎？"
 
-#: printer/printerdrake.pm:5624
+#: printer/printerdrake.pm:5648
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "正在移除印表機 \"%s\"..."
 
-#: printer/printerdrake.pm:5648
+#: printer/printerdrake.pm:5672
 #, c-format
 msgid "Default printer"
 msgstr "預設印表機"
 
-#: printer/printerdrake.pm:5649
+#: printer/printerdrake.pm:5673
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。"
@@ -14715,23 +14379,16 @@ msgstr ""
 msgid "Could not set permissions of firmware file %s!"
 msgstr ""
 
-#: scanner.pm:200
-#: standalone/scannerdrake:66
-#: standalone/scannerdrake:70
-#: standalone/scannerdrake:78
-#: standalone/scannerdrake:346
-#: standalone/scannerdrake:382
-#: standalone/scannerdrake:446
-#: standalone/scannerdrake:490
-#: standalone/scannerdrake:494
-#: standalone/scannerdrake:516
-#: standalone/scannerdrake:581
+#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
+#: standalone/scannerdrake:78 standalone/scannerdrake:346
+#: standalone/scannerdrake:382 standalone/scannerdrake:446
+#: standalone/scannerdrake:490 standalone/scannerdrake:494
+#: standalone/scannerdrake:516 standalone/scannerdrake:581
 #, c-format
 msgid "Scannerdrake"
 msgstr "Scannerdrake"
 
-#: scanner.pm:201
-#: standalone/scannerdrake:947
+#: scanner.pm:201 standalone/scannerdrake:947
 #, c-format
 msgid "Could not install the packages needed to share your scanner(s)."
 msgstr "無法安裝分享掃描器所需的套件。"
@@ -14789,7 +14446,9 @@ msgstr "允許/禁止 root 直接登入。"
 
 #: security/help.pm:33
 #, c-format
-msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)."
+msgid ""
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
 msgstr ""
 
 #: security/help.pm:35
@@ -14826,13 +14485,15 @@ msgstr ""
 msgid ""
 "Authorize:\n"
 "\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n"
+"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
+"set to \"ALL\",\n"
 "\n"
 "- only local ones if set to \"LOCAL\"\n"
 "\n"
 "- none if set to \"NONE\".\n"
 "\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))."
+"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
+"(5))."
 msgstr ""
 
 #: security/help.pm:63
@@ -14869,8 +14530,7 @@ msgid ""
 "\"%s\" is true, also reports to syslog."
 msgstr ""
 
-#: security/help.pm:80
-#: standalone/draksec:213
+#: security/help.pm:80 standalone/draksec:213
 #, c-format
 msgid "Security Alerts:"
 msgstr "安全警示："
@@ -14897,7 +14557,8 @@ msgstr ""
 
 #: security/help.pm:90
 #, c-format
-msgid " Enabling su only from members of the wheel group or allow su from any user."
+msgid ""
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
 #: security/help.pm:92
@@ -14937,7 +14598,9 @@ msgstr ""
 
 #: security/help.pm:106
 #, c-format
-msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters."
+msgid ""
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
 
 #: security/help.pm:108
@@ -15014,7 +14677,8 @@ msgstr ""
 
 #: security/help.pm:127
 #, c-format
-msgid "if set, send the mail report to this email address else send it to root."
+msgid ""
+"if set, send the mail report to this email address else send it to root."
 msgstr ""
 
 #: security/help.pm:128
@@ -15357,31 +15021,44 @@ msgstr ""
 
 #: security/level.pm:44
 #, c-format
-msgid "Passwords are now enabled, but use as a networked computer is still not recommended."
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
 msgstr "已啟動密碼認證功能, 但仍然不建議將此系統運作於網路上網路環境。"
 
 #: security/level.pm:45
 #, c-format
-msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client."
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
 msgstr "標準的系統安全性設定, 建議用在有對外連線的主機上使用。"
 
 #: security/level.pm:46
 #, c-format
-msgid "There are already some restrictions, and more automatic checks are run every night."
+msgid ""
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr "包含了相關存取限制, 以及每日定期系統稽核檢查動作。"
 
 #: security/level.pm:47
 #, c-format
 msgid ""
-"With this security level, the use of this system as a server becomes possible.\n"
-"The security is now high enough to use the system as a server which can accept\n"
-"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
 msgstr "高度的安全性相關的檢查與設定, 適合提供在架設對外服務的伺服器使用。"
 
 #: security/level.pm:50
 #, c-format
-msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum."
-msgstr "與上一個模式相同, 不過整個系統幾乎都是封閉的。系統整個安全設定機制都是在最嚴密的狀態。"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"與上一個模式相同, 不過整個系統幾乎都是封閉的。系統整個安全設定機制都是在最嚴"
+"密的狀態。"
 
 #: security/level.pm:55
 #, c-format
@@ -15405,7 +15082,8 @@ msgstr "啟用「libsafe」防護功能"
 
 #: security/level.pm:64
 #, c-format
-msgid "A library which defends against buffer overflow and format string attacks."
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
 msgstr "能夠偵測防禦緩衝區溢位與格式化字串這類攻擊的程式庫套件。"
 
 #: security/level.pm:65
@@ -15443,7 +15121,8 @@ msgstr "atd 服務程式, 能夠讓您在在命令列指定某個時間執行某
 #, c-format
 msgid ""
 "cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the basic\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
 "UNIX cron, including better security and more powerful configuration options."
 msgstr ""
 "cron 是個標準 unix 系統程式, 能夠提供使用者定期執行特定程式。\n"
@@ -15453,7 +15132,8 @@ msgstr ""
 #: services.pm:28
 #, c-format
 msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files change.\n"
+"FAM is a file monitoring daemon. It is used to get reports when files "
+"change.\n"
 "It is used by GNOME and KDE"
 msgstr ""
 
@@ -15461,7 +15141,8 @@ msgstr ""
 #, c-format
 msgid ""
 "GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
 "and includes support for pop-up menus on the console."
 msgstr ""
 "GPM 能夠讓系統在文字模式下驅動顯示出滑鼠游標, 能夠在 Midnight Commander\n"
@@ -15478,15 +15159,18 @@ msgstr ""
 
 #: services.pm:35
 #, c-format
-msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
 msgstr "Apache 是一個提供 Web 服務的程式, 提供架設 Web Server 讓使用者瀏覽。"
 
 #: services.pm:36
 #, c-format
 msgid ""
 "The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
 "all of the services it is responsible for."
 msgstr ""
 "internet superserver daemon (一般稱呼為 inetd), 它代為像是 telnet、ftp,\n"
@@ -15555,7 +15239,9 @@ msgstr "Linux Virtual Server, 用來架設一個高效能與高效率的 LVS 伺
 
 #: services.pm:54
 #, c-format
-msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
 msgstr ""
 "named (BIND) 適用來提供 Domain Name Server (DNS) 服務的程式, \n"
 "用來解析主機名稱與 IP 對應的關係。"
@@ -15613,7 +15299,8 @@ msgstr "支援 OKI 4w 以及 WindowsPrinter 印表機。"
 #, c-format
 msgid ""
 "PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe to have\n"
+"modems in laptops.  It will not get started unless configured so it is safe "
+"to have\n"
 "it installed on machines that do not need it."
 msgstr ""
 "PCMCIA 支援, 一般是用來讓筆記型電腦的網路卡、Modem 驅動所設計。\n"
@@ -15624,7 +15311,8 @@ msgstr ""
 #, c-format
 msgid ""
 "The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on machines\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
 "which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
 "portmapper 程式管理了 RPC 連線, 一般用於 NFS 與 NIS 通訊協定內。\n"
@@ -15632,7 +15320,9 @@ msgstr ""
 
 #: services.pm:73
 #, c-format
-msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
 msgstr "Postfix 是一個郵件傳送代理程式, 用來投遞信件提供 SMTP 服務。"
 
 #: services.pm:74
@@ -15712,14 +15402,12 @@ msgstr "載入 usb 裝置所需要的驅動程式"
 msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
 msgstr "啟動 X Font Server (這是為了 Xorg 執行一定要的)."
 
-#: services.pm:115
-#: services.pm:157
+#: services.pm:115 services.pm:157
 #, c-format
 msgid "Choose which services should be automatically started at boot time"
 msgstr "選擇希望在下一次開機時啟動的服務程式項目"
 
-#: services.pm:127
-#: standalone/draksambashare:105
+#: services.pm:127 standalone/draksambashare:105
 #, c-format
 msgid "Printing"
 msgstr "列印"
@@ -15768,8 +15456,7 @@ msgstr ""
 "抱歉 ! 這個服務項目並沒有\n"
 "額外的相關資訊。"
 
-#: services.pm:224
-#: ugtk2.pm:1029
+#: services.pm:224 ugtk2.pm:1029
 #, c-format
 msgid "Info"
 msgstr "資訊"
@@ -15931,13 +15618,21 @@ msgstr "辦公軟體平台"
 
 #: share/compssUsers.pl:28
 #, c-format
-msgid "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr "辦公軟體： 文書處理軟體 (OpenOffice.org Writer、Kword), 試算表 (OpenOffice.org Calc、Kspread), pdf 閱讀程式等等"
+msgid ""
+"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
+"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
+msgstr ""
+"辦公軟體： 文書處理軟體 (OpenOffice.org Writer、Kword), 試算表 (OpenOffice."
+"org Calc、Kspread), pdf 閱讀程式等等"
 
 #: share/compssUsers.pl:29
 #, c-format
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr "辦公軟體： 文書處理軟體 (kword、abiword), 試算表 (kspread、gnumeric), pdf 閱讀程式等等"
+msgid ""
+"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
+"gnumeric), pdf viewers, etc"
+msgstr ""
+"辦公軟體： 文書處理軟體 (kword、abiword), 試算表 (kspread、gnumeric), pdf 閱"
+"讀程式等等"
 
 #: share/compssUsers.pl:34
 #, c-format
@@ -15966,7 +15661,9 @@ msgstr "Internet 平台"
 
 #: share/compssUsers.pl:45
 #, c-format
-msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web"
+msgid ""
+"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
+"Web"
 msgstr "包含讀信、寄信和閱讀新聞群組 (mutt、tin ..) 以及網路瀏覽的工具"
 
 #: share/compssUsers.pl:50
@@ -15999,32 +15696,27 @@ msgstr "Console 工具"
 msgid "Editors, shells, file tools, terminals"
 msgstr "編輯器, shell, 檔案工具, 終端機"
 
-#: share/compssUsers.pl:66
-#: share/compssUsers.pl:170
+#: share/compssUsers.pl:66 share/compssUsers.pl:170
 #, c-format
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C/C++ 發展環境, 包含編譯器、程式庫與及一些引入檔案"
 
-#: share/compssUsers.pl:70
-#: share/compssUsers.pl:174
+#: share/compssUsers.pl:70 share/compssUsers.pl:174
 #, c-format
 msgid "Documentation"
 msgstr "文件檔案"
 
-#: share/compssUsers.pl:71
-#: share/compssUsers.pl:175
+#: share/compssUsers.pl:71 share/compssUsers.pl:175
 #, c-format
 msgid "Books and Howto's on Linux and Free Software"
 msgstr "Linux 系統與一些免費軟體的書籍、HOWTO 文件"
 
-#: share/compssUsers.pl:75
-#: share/compssUsers.pl:178
+#: share/compssUsers.pl:75 share/compssUsers.pl:178
 #, c-format
 msgid "LSB"
 msgstr "LSB"
 
-#: share/compssUsers.pl:76
-#: share/compssUsers.pl:179
+#: share/compssUsers.pl:76 share/compssUsers.pl:179
 #, c-format
 msgid "Linux Standard Base. Third party applications support"
 msgstr "LSB 的支援, 包含第三類協力廠商軟體支援"
@@ -16044,14 +15736,12 @@ msgstr "群組軟體"
 msgid "Kolab Server"
 msgstr "Kolab 伺服器"
 
-#: share/compssUsers.pl:93
-#: share/compssUsers.pl:134
+#: share/compssUsers.pl:93 share/compssUsers.pl:134
 #, c-format
 msgid "Firewall/Router"
 msgstr "防火牆/路由器"
 
-#: share/compssUsers.pl:94
-#: share/compssUsers.pl:135
+#: share/compssUsers.pl:94 share/compssUsers.pl:135
 #, c-format
 msgid "Internet gateway"
 msgstr "Internet 閘道器"
@@ -16101,8 +15791,7 @@ msgstr "檔案與列印分享伺服器"
 msgid "NFS Server, Samba server"
 msgstr "NFS 伺服器、Samba 伺服器"
 
-#: share/compssUsers.pl:117
-#: share/compssUsers.pl:130
+#: share/compssUsers.pl:117 share/compssUsers.pl:130
 #, c-format
 msgid "Database"
 msgstr "資料庫軟體"
@@ -16154,7 +15843,9 @@ msgstr "KDE 環境"
 
 #: share/compssUsers.pl:148
 #, c-format
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
+msgid ""
+"The K Desktop Environment, the basic graphical environment with a collection "
+"of accompanying tools"
 msgstr "KDE 圖形桌面介面環境, 包含許多好用的圖型介面工具程式"
 
 #: share/compssUsers.pl:152
@@ -16164,7 +15855,9 @@ msgstr "Gnome 環境"
 
 #: share/compssUsers.pl:153
 #, c-format
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
+msgid ""
+"A graphical environment with user-friendly set of applications and desktop "
+"tools"
 msgstr "包含友善的應用程式、桌面軟體的圖型化使用環境"
 
 #: share/compssUsers.pl:156
@@ -16187,9 +15880,7 @@ msgstr "Window Maker, Enlightenment, Fvwm, 等視窗管理程式"
 msgid "Utilities"
 msgstr "工具軟體"
 
-#: share/compssUsers.pl:186
-#: share/compssUsers.pl:187
-#: standalone/logdrake:381
+#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381
 #, c-format
 msgid "SSH Server"
 msgstr "SSH 伺服主機"
@@ -16251,7 +15942,8 @@ msgid ""
 "--default             : save default directories.\n"
 "--debug               : show all debug messages.\n"
 "--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X users).\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
 "--daemon              : use daemon configuration. \n"
 "--help                : show this message.\n"
 "--version             : show version number.\n"
@@ -16317,9 +16009,12 @@ msgid ""
 "--start          : start MTS\n"
 "--stop           : stop MTS\n"
 "--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
 msgstr ""
 
 #: standalone.pm:96
@@ -16355,15 +16050,19 @@ msgstr ""
 #, c-format
 msgid ""
 "[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva Update mode\n"
+"  --no-confirmation      do not ask first confirmation question in Mandriva "
+"Update mode\n"
 "  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the description window\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
 "  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 msgstr ""
 
 #: standalone.pm:113
 #, c-format
-msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]"
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
 
 #: standalone.pm:114
@@ -16378,7 +16077,8 @@ msgstr ""
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] "
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
 msgstr ""
 
 #: standalone/XFdrake:59
@@ -16396,15 +16096,16 @@ msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"
 msgid "You need to log out and back in again for changes to take effect"
 msgstr ""
 
-#: standalone/drakTermServ:102
-#: standalone/drakTermServ:108
+#: standalone/drakTermServ:102 standalone/drakTermServ:108
 #, c-format
 msgid "%s: %s requires a username...\n"
 msgstr ""
 
 #: standalone/drakTermServ:119
 #, c-format
-msgid "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n"
+msgid ""
+"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
+"0/1 for Local Config...\n"
 msgstr ""
 
 #: standalone/drakTermServ:125
@@ -16412,8 +16113,7 @@ msgstr ""
 msgid "%s: %s requires hostname...\n"
 msgstr ""
 
-#: standalone/drakTermServ:207
-#: standalone/drakTermServ:210
+#: standalone/drakTermServ:207 standalone/drakTermServ:210
 #, c-format
 msgid "Terminal Server Configuration"
 msgstr "Terminal Server 設定"
@@ -16473,14 +16173,12 @@ msgstr "圖像"
 msgid "Clients/Users"
 msgstr ""
 
-#: standalone/drakTermServ:289
-#: standalone/drakbug:47
+#: standalone/drakTermServ:289 standalone/drakbug:47
 #, c-format
 msgid "First Time Wizard"
 msgstr "首次精靈"
 
-#: standalone/drakTermServ:326
-#: standalone/drakTermServ:327
+#: standalone/drakTermServ:326 standalone/drakTermServ:327
 #, c-format
 msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
 msgstr ""
@@ -16495,11 +16193,15 @@ msgid ""
 "\t\n"
 "After doing these steps, the wizard will:\n"
 "\t\n"
-"    a) Make all nbis.                                                                \n"
-"    b) Activate the server.                                                          \n"
-"    c) Start the server.                                                     \n"
+"    a) Make all "
+"nbis.                                                                \n"
+"    b) Activate the "
+"server.                                                          \n"
+"    c) Start the "
+"server.                                                     \n"
 "    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ file.                                              \n"
+"       are added to the shadow$$CLIENT$$ "
+"file.                                              \n"
 "    e) Ask you to make a boot floppy.\n"
 "    f) If it's thin clients, ask if you want to restart KDM.\n"
 msgstr ""
@@ -16527,8 +16229,10 @@ msgstr ""
 #: standalone/drakTermServ:426
 #, c-format
 msgid ""
-"Please select default client type (Fat is the default type if 'Use thin' is unchecked).\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client display.\n"
+"Please select default client type (Fat is the default type if 'Use thin' is "
+"unchecked).\n"
+"    'Thin' clients run everything off the server's CPU/RAM, using the client "
+"display.\n"
 "    'Fat' clients use their own CPU/RAM but the server's filesystem."
 msgstr ""
 
@@ -16537,21 +16241,18 @@ msgstr ""
 msgid "Creating net boot images for all kernels"
 msgstr ""
 
-#: standalone/drakTermServ:447
-#: standalone/drakTermServ:769
+#: standalone/drakTermServ:447 standalone/drakTermServ:769
 #: standalone/drakTermServ:785
 #, c-format
 msgid "This will take a few minutes."
 msgstr "這個過程將會需要花費一些時間。"
 
-#: standalone/drakTermServ:453
-#: standalone/drakTermServ:493
+#: standalone/drakTermServ:453 standalone/drakTermServ:493
 #, c-format
 msgid "Done!"
 msgstr "完成！"
 
-#: standalone/drakTermServ:464
-#: standalone/drakTermServ:849
+#: standalone/drakTermServ:464 standalone/drakTermServ:849
 #, c-format
 msgid "%s failed"
 msgstr "%s 失敗"
@@ -16571,7 +16272,9 @@ msgstr ""
 
 #: standalone/drakTermServ:499
 #, c-format
-msgid "In order to enable changes made for thin clients, the display manager must be restarted. Restart now?"
+msgid ""
+"In order to enable changes made for thin clients, the display manager must "
+"be restarted. Restart now?"
 msgstr ""
 
 #: standalone/drakTermServ:534
@@ -16583,59 +16286,85 @@ msgstr "Terminal Server 概觀"
 #, c-format
 msgid ""
 "        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n"
-"        \tinterface to help manage/customize these images. To create the file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least one full kernel."
+"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+"        \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+"        \tinterface to help manage/customize these images. To create the "
+"file \n"
+"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
 msgstr ""
 
 #: standalone/drakTermServ:541
 #, c-format
 msgid ""
 "        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps create/remove \n"
+"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+"        \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
 "        \tthese entries.\n"
 "\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it expects \n"
+"        \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
 "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
 "\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks like:"
+"        \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
 msgstr ""
 
 #: standalone/drakTermServ:559
 #, c-format
 msgid ""
-"        While you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the functionality\n"
+"        While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+"        a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
 "        of client-specific configuration files that ClusterNFS provides.\n"
 "\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, while fat clients run \n"
+"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
+"while fat clients run \n"
 "        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local\n"
+"        written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"        modified if thin clients are used, to enable XDMCP. Since there are "
+"security issues in \n"
+"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
 "        subnet.\n"
 "\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once you are satisfied \n"
-"        with the configuration, you can remove root login privileges from the client.\n"
+"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"        be 'true' or 'false'.  'true' enables root login at the client "
+"machine and allows local \n"
+"        hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+"        by creating separate config files associated with the client's IP "
+"address and creating \n"
+"        read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"        with the configuration, you can remove root login privileges from "
+"the client.\n"
 "\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing clients."
+"        Note: You must stop/start the server after adding or changing "
+"clients."
 msgstr ""
 
 #: standalone/drakTermServ:579
 #, c-format
 msgid ""
 "        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root filesystem from\n"
+"        \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
 "        \tdiskless clients.\n"
 "\n"
 "        \tA typical exports entry for clusternfs is:\n"
@@ -16650,17 +16379,21 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless client, their entry in\n"
+"        \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
 "        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this file."
+"        \thelps in this respect by adding or removing system users from this "
+"file."
 msgstr ""
 
 #: standalone/drakTermServ:595
 #, c-format
 msgid ""
 "        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
 "        \tdrakTermServ will help create these files."
 msgstr ""
 
@@ -16668,22 +16401,30 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
+"        \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+"        \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
 "        \t/etc/sysconfig/keyboard on a per-client basis.\n"
 "\n"
-"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local configuration can be\n"
-"        turned back off, retaining the configuration files, once the client machine is configured."
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be\n"
+"        turned back off, retaining the configuration files, once the client "
+"machine is configured."
 msgstr ""
 
 #: standalone/drakTermServ:609
 #, c-format
 msgid ""
 "        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n"
+"        \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
 "        \teach diskless client.\n"
 "\n"
 "        \tA typical TFTP configuration file looks like:\n"
@@ -16699,8 +16440,10 @@ msgid ""
 "                        server_args  = -s /var/lib/tftpboot\n"
 "        \t}\n"
 "        \t\t\n"
-"        \tThe changes here from the default installation are changing the disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
+"        \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
 "        \tputs its images."
 msgstr ""
 
@@ -16708,11 +16451,14 @@ msgstr ""
 #, c-format
 msgid ""
 "        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help generate these\n"
+"        \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+"        \tor CD to initiate the boot sequence.  drakTermServ will help "
+"generate these\n"
 "        \timages, based on the NIC in the client machine.\n"
 "        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
+"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
 "        \t\t\n"
 "        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
 msgstr ""
@@ -17061,8 +16807,7 @@ msgstr ""
 msgid "Deleted %s...\n"
 msgstr "已刪除 %s...\n"
 
-#: standalone/drakTermServ:1830
-#: standalone/drakTermServ:1903
+#: standalone/drakTermServ:1830 standalone/drakTermServ:1903
 #, c-format
 msgid "%s not found...\n"
 msgstr "%s 未找到...\n"
@@ -17077,18 +16822,11 @@ msgstr ""
 msgid "Configuration changed - restart clusternfs/dhcpd?"
 msgstr ""
 
-#: standalone/drakautoinst:38
-#: standalone/drakhosts:123
-#: standalone/drakhosts:129
-#: standalone/draknfs:84
-#: standalone/draknfs:105
-#: standalone/draknfs:444
-#: standalone/draknfs:447
-#: standalone/draknfs:539
-#: standalone/draknfs:546
-#: standalone/draksambashare:181
-#: standalone/draksambashare:202
-#: standalone/draksambashare:625
+#: standalone/drakautoinst:38 standalone/drakhosts:123
+#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
+#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
+#: standalone/draknfs:546 standalone/draksambashare:181
+#: standalone/draksambashare:202 standalone/draksambashare:625
 #: standalone/draksambashare:792
 #, c-format
 msgid "Error!"
@@ -17107,11 +16845,15 @@ msgstr "自動安裝設定程式"
 #: standalone/drakautoinst:42
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n"
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
 "\n"
-"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
 "\n"
-"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
 "\n"
 "Press ok to continue."
 msgstr ""
@@ -17130,8 +16872,7 @@ msgstr ""
 msgid "replay"
 msgstr "重播"
 
-#: standalone/drakautoinst:60
-#: standalone/drakautoinst:69
+#: standalone/drakautoinst:60 standalone/drakautoinst:69
 #, c-format
 msgid "manual"
 msgstr "手動"
@@ -17143,11 +16884,12 @@ msgstr "自動化步驟設定"
 
 #: standalone/drakautoinst:65
 #, c-format
-msgid "Please choose for each step whether it will replay like your install, or it will be manual"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr "請選擇每一個安裝的步驟, 這些將會是您所操作的安裝過程"
 
-#: standalone/drakautoinst:77
-#: standalone/drakautoinst:78
+#: standalone/drakautoinst:77 standalone/drakautoinst:78
 #: standalone/drakautoinst:92
 #, c-format
 msgid "Creating auto install floppy"
@@ -17202,7 +16944,9 @@ msgstr "移除之前項目"
 
 #: standalone/drakbackup:153
 #, c-format
-msgid "Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention."
+msgid ""
+"Expect is an extension to the TCL scripting language that allows interactive "
+"sessions without user intervention."
 msgstr ""
 
 #: standalone/drakbackup:154
@@ -17212,52 +16956,74 @@ msgstr ""
 
 #: standalone/drakbackup:155
 #, c-format
-msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
+msgid ""
+"For a multisession CD, only the first session will erase the cdrw. Otherwise "
+"the cdrw is erased before each backup."
 msgstr ""
 
 #: standalone/drakbackup:156
 #, c-format
-msgid "This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used."
+msgid ""
+"This option will save files that have changed.  Exact behavior depends on "
+"whether incremental or differential mode is used."
 msgstr ""
 
 #: standalone/drakbackup:157
 #, c-format
-msgid "Incremental backups only save files that have changed or are new since the last backup."
+msgid ""
+"Incremental backups only save files that have changed or are new since the "
+"last backup."
 msgstr ""
 
 #: standalone/drakbackup:158
 #, c-format
-msgid "Differential backups only save files that have changed or are new since the original 'base' backup."
+msgid ""
+"Differential backups only save files that have changed or are new since the "
+"original 'base' backup."
 msgstr ""
 
 #: standalone/drakbackup:159
 #, c-format
-msgid "This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server."
+msgid ""
+"This should be a local user or email address that you want the backup "
+"results sent to. You will need to define a functioning mail server."
 msgstr ""
 
 #: standalone/drakbackup:160
 #, c-format
-msgid "This should be the return address that you want the backup results sent from. Default is drakbackup."
+msgid ""
+"This should be the return address that you want the backup results sent "
+"from. Default is drakbackup."
 msgstr ""
 
 #: standalone/drakbackup:161
 #, c-format
-msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up."
+msgid ""
+"Files or wildcards listed in a .backupignore file at the top of a directory "
+"tree will not be backed up."
 msgstr ""
 
 #: standalone/drakbackup:162
 #, c-format
-msgid "For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup."
+msgid ""
+"For backups to other media, files are still created on the hard drive, then "
+"moved to the other media.  Enabling this option will remove the hard drive "
+"tar files after the backup."
 msgstr ""
 
 #: standalone/drakbackup:163
 #, c-format
-msgid "Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path."
+msgid ""
+"Some protocols, like rsync, may be configured at the server end.  Rather "
+"than using a directory path, you would use the 'module' name for the service "
+"path."
 msgstr ""
 
 #: standalone/drakbackup:164
 #, c-format
-msgid "Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab."
+msgid ""
+"Custom allows you to specify your own day and time.  The other options use "
+"run-parts in /etc/crontab."
 msgstr ""
 
 #: standalone/drakbackup:327
@@ -17275,16 +17041,16 @@ msgstr ""
 msgid "Interval cron not available as non-root"
 msgstr "使用非 root 身份時無法使用 Interval Cron"
 
-#: standalone/drakbackup:465
-#: standalone/logdrake:437
+#: standalone/drakbackup:465 standalone/logdrake:437
 #, c-format
 msgid "\"%s\" neither is a valid email nor is an existing local user!"
 msgstr ""
 
-#: standalone/drakbackup:469
-#: standalone/logdrake:442
+#: standalone/drakbackup:469 standalone/logdrake:442
 #, c-format
-msgid "\"%s\" is a local user, but you did not select a local smtp, so you must use a complete email address!"
+msgid ""
+"\"%s\" is a local user, but you did not select a local smtp, so you must use "
+"a complete email address!"
 msgstr ""
 
 #: standalone/drakbackup:478
@@ -17333,8 +17099,7 @@ msgstr ""
 "\n"
 "\n"
 
-#: standalone/drakbackup:543
-#: standalone/drakbackup:614
+#: standalone/drakbackup:543 standalone/drakbackup:614
 #: standalone/drakbackup:670
 #, c-format
 msgid "Total progress"
@@ -17442,14 +17207,12 @@ msgid ""
 "%d MB used vs %d MB allocated."
 msgstr ""
 
-#: standalone/drakbackup:954
-#: standalone/drakbackup:986
+#: standalone/drakbackup:954 standalone/drakbackup:986
 #, c-format
 msgid "Backup system files..."
 msgstr "備份系統檔案..."
 
-#: standalone/drakbackup:987
-#: standalone/drakbackup:1027
+#: standalone/drakbackup:987 standalone/drakbackup:1027
 #, c-format
 msgid "Hard Disk Backup files..."
 msgstr "硬碟備份檔案..."
@@ -17474,8 +17237,7 @@ msgstr "硬碟備份進度..."
 msgid "No changes to backup!"
 msgstr "備份沒有任何異動！"
 
-#: standalone/drakbackup:1083
-#: standalone/drakbackup:1106
+#: standalone/drakbackup:1083 standalone/drakbackup:1106
 #, c-format
 msgid ""
 "\n"
@@ -17490,14 +17252,16 @@ msgstr ""
 #, c-format
 msgid ""
 "\n"
-" FTP connection problem: It was not possible to send your backup files by FTP.\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
 "\n"
 "(!) FTP 連結錯誤：由於 FTP 連線錯誤, 備份檔案將沒透過 FTP 備份傳送出去。\n"
 
 #: standalone/drakbackup:1093
 #, c-format
-msgid "Error during sending file via FTP. Please correct your FTP configuration."
+msgid ""
+"Error during sending file via FTP. Please correct your FTP configuration."
 msgstr "使用 FTP 上傳檔案時發生錯誤。請修正您的 FTP 設定。"
 
 #: standalone/drakbackup:1095
@@ -17553,7 +17317,8 @@ msgstr ""
 
 #: standalone/drakbackup:1398
 #, c-format
-msgid "These options can backup and restore all files in your /etc directory.\n"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
 msgstr "這個選項能夠備份與還原您系統的 /etc 目錄。\n"
 
 #: standalone/drakbackup:1399
@@ -17561,22 +17326,19 @@ msgstr "這個選項能夠備份與還原您系統的 /etc 目錄。\n"
 msgid "Backup your System files. (/etc directory)"
 msgstr "備份您的系統檔案。(/etc 目錄)"
 
-#: standalone/drakbackup:1400
-#: standalone/drakbackup:1464
+#: standalone/drakbackup:1400 standalone/drakbackup:1464
 #: standalone/drakbackup:1530
 #, c-format
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr "使用遞增/差異檔案備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1402
-#: standalone/drakbackup:1466
+#: standalone/drakbackup:1402 standalone/drakbackup:1466
 #: standalone/drakbackup:1532
 #, c-format
 msgid "Use Incremental Backups"
 msgstr "使用遞增備份 (不會覆蓋舊有備份)"
 
-#: standalone/drakbackup:1402
-#: standalone/drakbackup:1466
+#: standalone/drakbackup:1402 standalone/drakbackup:1466
 #: standalone/drakbackup:1532
 #, c-format
 msgid "Use Differential Backups"
@@ -17609,8 +17371,7 @@ msgstr "不要包含瀏覽器的快取資料檔"
 msgid "Select the files or directories and click on 'OK'"
 msgstr "選取檔案或者是目錄, 然後點選 '加入'"
 
-#: standalone/drakbackup:1518
-#: standalone/drakfont:656
+#: standalone/drakbackup:1518 standalone/drakfont:656
 #, c-format
 msgid "Remove Selected"
 msgstr "移除選取項目"
@@ -17795,36 +17556,31 @@ msgstr "CDROM / DVDROM"
 msgid "HardDrive / NFS"
 msgstr "硬碟 / NFS"
 
-#: standalone/drakbackup:2060
-#: standalone/drakbackup:2061
+#: standalone/drakbackup:2060 standalone/drakbackup:2061
 #: standalone/drakbackup:2066
 #, c-format
 msgid "hourly"
 msgstr "每小時"
 
-#: standalone/drakbackup:2060
-#: standalone/drakbackup:2062
+#: standalone/drakbackup:2060 standalone/drakbackup:2062
 #: standalone/drakbackup:2067
 #, c-format
 msgid "daily"
 msgstr "每天"
 
-#: standalone/drakbackup:2060
-#: standalone/drakbackup:2063
+#: standalone/drakbackup:2060 standalone/drakbackup:2063
 #: standalone/drakbackup:2068
 #, c-format
 msgid "weekly"
 msgstr "每週"
 
-#: standalone/drakbackup:2060
-#: standalone/drakbackup:2064
+#: standalone/drakbackup:2060 standalone/drakbackup:2064
 #: standalone/drakbackup:2069
 #, c-format
 msgid "monthly"
 msgstr "每月"
 
-#: standalone/drakbackup:2060
-#: standalone/drakbackup:2065
+#: standalone/drakbackup:2060 standalone/drakbackup:2065
 #: standalone/drakbackup:2070
 #, c-format
 msgid "custom"
@@ -17977,7 +17733,8 @@ msgstr "請確定您有啟用 cron 排程服務程式。"
 
 #: standalone/drakbackup:2156
 #, c-format
-msgid "If your machine is not on all the time, you might want to install anacron."
+msgid ""
+"If your machine is not on all the time, you might want to install anacron."
 msgstr ""
 
 #: standalone/drakbackup:2157
@@ -18040,8 +17797,7 @@ msgstr "更多選項"
 msgid "Backup destination not configured..."
 msgstr "備份功能尚未設定..."
 
-#: standalone/drakbackup:2318
-#: standalone/drakbackup:4242
+#: standalone/drakbackup:2318 standalone/drakbackup:4242
 #, c-format
 msgid "Drakbackup Configuration"
 msgstr "Drakbackup 組態"
@@ -18333,8 +18089,7 @@ msgstr ""
 msgid "- Restore System Files.\n"
 msgstr "- 回存系統檔案。\n"
 
-#: standalone/drakbackup:2558
-#: standalone/drakbackup:2568
+#: standalone/drakbackup:2558 standalone/drakbackup:2568
 #, c-format
 msgid "   - from date: %s %s\n"
 msgstr ""
@@ -18443,8 +18198,7 @@ msgstr "回存其他檔案"
 msgid "Select path to restore (instead of /)"
 msgstr "選擇要回存的路徑名稱 (代替預設的 /)"
 
-#: standalone/drakbackup:3120
-#: standalone/drakbackup:3402
+#: standalone/drakbackup:3120 standalone/drakbackup:3402
 #, c-format
 msgid "Path To Restore To"
 msgstr "回存的路徑"
@@ -18600,8 +18354,7 @@ msgstr "回存失敗..."
 msgid "%s not retrieved..."
 msgstr "%s 無法取得..."
 
-#: standalone/drakbackup:3778
-#: standalone/drakbackup:3847
+#: standalone/drakbackup:3778 standalone/drakbackup:3847
 #, c-format
 msgid "Search for files to restore"
 msgstr "搜尋檔案來回存"
@@ -18616,8 +18369,7 @@ msgstr "回存所有備份資料"
 msgid "Custom Restore"
 msgstr "自訂回存方式"
 
-#: standalone/drakbackup:3794
-#: standalone/drakbackup:3843
+#: standalone/drakbackup:3794 standalone/drakbackup:3843
 #, c-format
 msgid "Restore From Catalog"
 msgstr "使用型錄回存"
@@ -18667,18 +18419,11 @@ msgstr "回存進度"
 msgid "Build Backup"
 msgstr "建立備份"
 
-#: standalone/drakbackup:4021
-#: standalone/drakbackup:4341
+#: standalone/drakbackup:4021 standalone/drakbackup:4341
 #, c-format
 msgid "Restore"
 msgstr "回存"
 
-#: standalone/drakbackup:4109
-#: standalone/harddrake2:479
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "需要安裝下列套件：\n"
-
 #: standalone/drakbackup:4136
 #, c-format
 msgid "Please select data to restore..."
@@ -18699,8 +18444,7 @@ msgstr "備份使用者檔案"
 msgid "Backup other files"
 msgstr "備份其他檔案"
 
-#: standalone/drakbackup:4185
-#: standalone/drakbackup:4219
+#: standalone/drakbackup:4185 standalone/drakbackup:4219
 #, c-format
 msgid "Total Progress"
 msgstr "全部進度"
@@ -18759,8 +18503,7 @@ msgstr ""
 "尚未產生組態設定檔案, 請點選\n"
 "精靈或者是進階模式建立之。"
 
-#: standalone/drakbackup:4358
-#: standalone/drakbackup:4361
+#: standalone/drakbackup:4358 standalone/drakbackup:4361
 #, c-format
 msgid "Drakbackup"
 msgstr "Drakbackup"
@@ -18770,27 +18513,20 @@ msgstr "Drakbackup"
 msgid "No bootloader found, creating a new configuration"
 msgstr ""
 
-#: standalone/drakboot:84
-#: standalone/harddrake2:190
-#: standalone/harddrake2:191
-#: standalone/harddrake2:192
-#: standalone/logdrake:69
-#: standalone/printerdrake:150
-#: standalone/printerdrake:151
+#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
+#: standalone/harddrake2:192 standalone/logdrake:69
+#: standalone/printerdrake:150 standalone/printerdrake:151
 #: standalone/printerdrake:152
 #, c-format
 msgid "/_File"
 msgstr "/檔案 (_F)"
 
-#: standalone/drakboot:85
-#: standalone/logdrake:75
+#: standalone/drakboot:85 standalone/logdrake:75
 #, c-format
 msgid "/File/_Quit"
 msgstr "/檔案 (F)/結束 (_Q)"
 
-#: standalone/drakboot:85
-#: standalone/harddrake2:192
-#: standalone/logdrake:75
+#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
 #: standalone/printerdrake:152
 #, c-format
 msgid "<control>Q"
@@ -18813,7 +18549,9 @@ msgstr "隱藏訊息"
 
 #: standalone/drakboot:134
 #, c-format
-msgid "Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool."
+msgid ""
+"Your system bootloader is not in framebuffer mode. To activate graphical "
+"boot, select a graphic video mode from the bootloader configuration tool."
 msgstr ""
 
 #: standalone/drakboot:135
@@ -18888,7 +18626,8 @@ msgstr "開機時啟動 X Window 圖形作業環境"
 #: standalone/drakboot:272
 #, c-format
 msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries selected below.\n"
+"Please choose a video mode, it will be applied to each of the boot entries "
+"selected below.\n"
 "Be sure your video card supports the mode you choose."
 msgstr ""
 
@@ -18907,8 +18646,7 @@ msgstr "Mandriva Linux 控制中心"
 msgid "Synchronization tool"
 msgstr "同步工具"
 
-#: standalone/drakbug:49
-#: standalone/drakbug:152
+#: standalone/drakbug:49 standalone/drakbug:152
 #, c-format
 msgid "Standalone Tools"
 msgstr "單一工具"
@@ -18953,8 +18691,7 @@ msgstr "Urpmi 套件管理"
 msgid "Windows Migration tool"
 msgstr "Windows 整合工具"
 
-#: standalone/drakbug:58
-#: standalone/draksambashare:1230
+#: standalone/drakbug:58 standalone/draksambashare:1230
 #, c-format
 msgid "Userdrake"
 msgstr "Userdrake 使用者管理"
@@ -18995,8 +18732,10 @@ msgstr "核心："
 #, c-format
 msgid ""
 "To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel version, and /proc/cpuinfo."
+"This will open a web browser window on %s where you'll find a form to fill "
+"in.  The information displayed above will be transferred to that server.  \n"
+"Things useful to include in your report are the output of lspci, kernel "
+"version, and /proc/cpuinfo."
 msgstr ""
 "要回報臭蟲問題，請點選回報的按鈕。\n"
 "這將會在 %s 開啟瀏覽器，並有一表格可填入。\n"
@@ -19075,8 +18814,7 @@ msgstr "伺服器："
 msgid "Could not synchronize with %s."
 msgstr ""
 
-#: standalone/drakclock:146
-#: standalone/drakclock:156
+#: standalone/drakclock:146 standalone/drakclock:156
 #, c-format
 msgid "Reset"
 msgstr "重設"
@@ -19099,20 +18837,17 @@ msgstr ""
 msgid "Network configuration (%d adapters)"
 msgstr "網路組態 (%d 介面卡)"
 
-#: standalone/drakconnect:89
-#: standalone/drakconnect:807
+#: standalone/drakconnect:89 standalone/drakconnect:807
 #, c-format
 msgid "Gateway:"
 msgstr "閘道器："
 
-#: standalone/drakconnect:89
-#: standalone/drakconnect:807
+#: standalone/drakconnect:89 standalone/drakconnect:807
 #, c-format
 msgid "Interface:"
 msgstr "介面:"
 
-#: standalone/drakconnect:93
-#: standalone/net_monitor:116
+#: standalone/drakconnect:93 standalone/net_monitor:116
 #, c-format
 msgid "Wait please"
 msgstr "請稍後"
@@ -19122,8 +18857,7 @@ msgstr "請稍後"
 msgid "Interface"
 msgstr "介面"
 
-#: standalone/drakconnect:109
-#: standalone/printerdrake:224
+#: standalone/drakconnect:109 standalone/printerdrake:224
 #: standalone/printerdrake:231
 #, c-format
 msgid "State"
@@ -19139,8 +18873,7 @@ msgstr "主機名稱："
 msgid "Configure hostname..."
 msgstr "設定主機名稱..."
 
-#: standalone/drakconnect:142
-#: standalone/drakconnect:845
+#: standalone/drakconnect:142 standalone/drakconnect:845
 #, c-format
 msgid "LAN configuration"
 msgstr "區域網路設定"
@@ -19150,8 +18883,7 @@ msgstr "區域網路設定"
 msgid "Configure Local Area Network..."
 msgstr "設定區域網路..."
 
-#: standalone/drakconnect:155
-#: standalone/drakconnect:237
+#: standalone/drakconnect:155 standalone/drakconnect:237
 #: standalone/drakconnect:241
 #, c-format
 msgid "Apply"
@@ -19227,20 +18959,17 @@ msgstr "忙線中"
 msgid "Modem sound"
 msgstr "數據機聲音"
 
-#: standalone/drakconnect:542
-#: standalone/drakgw:105
+#: standalone/drakconnect:542 standalone/drakgw:105
 #, c-format
 msgid "Enable"
 msgstr "啟動"
 
-#: standalone/drakconnect:542
-#: standalone/drakgw:105
+#: standalone/drakconnect:542 standalone/drakgw:105
 #, c-format
 msgid "Disable"
 msgstr "不啟用"
 
-#: standalone/drakconnect:593
-#: standalone/harddrake2:50
+#: standalone/drakconnect:593 standalone/harddrake2:50
 #, c-format
 msgid "Media class"
 msgstr "媒介類別"
@@ -19255,23 +18984,22 @@ msgstr "模組名稱"
 msgid "Mac Address"
 msgstr " MAC 位址"
 
-#: standalone/drakconnect:596
-#: standalone/harddrake2:28
+#: standalone/drakconnect:596 standalone/harddrake2:28
 #: standalone/harddrake2:120
 #, c-format
 msgid "Bus"
 msgstr "匯流排"
 
-#: standalone/drakconnect:597
-#: standalone/harddrake2:34
+#: standalone/drakconnect:597 standalone/harddrake2:34
 #, c-format
 msgid "Location on the bus"
 msgstr "匯流排上的位置"
 
-#: standalone/drakconnect:700
-#: standalone/drakgw:311
+#: standalone/drakconnect:700 standalone/drakgw:311
 #, c-format
-msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr "您系統偵測不到有網路卡的存在，請重新執行硬體設定工具。"
 
 #: standalone/drakconnect:708
@@ -19297,7 +19025,8 @@ msgstr ""
 
 #: standalone/drakconnect:745
 #, c-format
-msgid "Congratulations, the \"%s\" network interface has been successfully deleted"
+msgid ""
+"Congratulations, the \"%s\" network interface has been successfully deleted"
 msgstr ""
 
 #: standalone/drakconnect:761
@@ -19310,26 +19039,22 @@ msgstr "沒有 IP"
 msgid "No Mask"
 msgstr "沒有遮罩"
 
-#: standalone/drakconnect:763
-#: standalone/drakconnect:916
+#: standalone/drakconnect:763 standalone/drakconnect:916
 #, c-format
 msgid "up"
 msgstr "啟用"
 
-#: standalone/drakconnect:763
-#: standalone/drakconnect:916
+#: standalone/drakconnect:763 standalone/drakconnect:916
 #, c-format
 msgid "down"
 msgstr "停用"
 
-#: standalone/drakconnect:798
-#: standalone/net_monitor:465
+#: standalone/drakconnect:798 standalone/net_monitor:465
 #, c-format
 msgid "Connected"
 msgstr "已連線"
 
-#: standalone/drakconnect:798
-#: standalone/net_monitor:465
+#: standalone/drakconnect:798 standalone/net_monitor:465
 #, c-format
 msgid "Not connected"
 msgstr "尚未連線"
@@ -19392,8 +19117,7 @@ msgstr ""
 "網路介面尚未設定。\n"
 "請從 Mandriva Linux 控制中心執行「增加網路介面」精靈"
 
-#: standalone/drakconnect:975
-#: standalone/net_applet:51
+#: standalone/drakconnect:975 standalone/net_applet:51
 #, c-format
 msgid ""
 "You do not have any configured Internet connection.\n"
@@ -19403,9 +19127,7 @@ msgstr ""
 "請由 Mandriva Linux 控制中心啟動 \"%s\" 設定精靈"
 
 #. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:976
-#: standalone/drakroam:30
-#: standalone/net_applet:52
+#: standalone/drakconnect:976 standalone/drakroam:30 standalone/net_applet:52
 #, c-format
 msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
 msgstr "設定一個新的網路介面 (區域網路、ISDN、ADSL、...)"
@@ -19430,8 +19152,7 @@ msgstr "網際網路連線設定"
 msgid "Internet access"
 msgstr "網際網路存取"
 
-#: standalone/drakconnect:1019
-#: standalone/net_monitor:95
+#: standalone/drakconnect:1019 standalone/net_monitor:95
 #, c-format
 msgid "Connection type: "
 msgstr "連線項目： "
@@ -19476,7 +19197,9 @@ msgstr "改變完成，您要重新啟動 dm 服務嗎？"
 
 #: standalone/drakedm:73
 #, c-format
-msgid "You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?"
+msgid ""
+"You are going to close all running programs and lose your current session. "
+"Are you really sure that you want to restart the dm service?"
 msgstr ""
 
 #: standalone/drakfont:183
@@ -19499,14 +19222,9 @@ msgstr "解析所有字型"
 msgid "No fonts found"
 msgstr "找不到字型"
 
-#: standalone/drakfont:218
-#: standalone/drakfont:260
-#: standalone/drakfont:327
-#: standalone/drakfont:360
-#: standalone/drakfont:368
-#: standalone/drakfont:394
-#: standalone/drakfont:412
-#: standalone/drakfont:426
+#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
+#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
+#: standalone/drakfont:412 standalone/drakfont:426
 #, c-format
 msgid "done"
 msgstr "完成"
@@ -19556,8 +19274,7 @@ msgstr "請稍候，執行 ttmkfdir 程式中..."
 msgid "True Type install done"
 msgstr "True Type 字體安裝完成"
 
-#: standalone/drakfont:342
-#: standalone/drakfont:357
+#: standalone/drakfont:342 standalone/drakfont:357
 #, c-format
 msgid "type1inst building"
 msgstr ""
@@ -19577,8 +19294,7 @@ msgstr "不刪除暫存檔案"
 msgid "Restart XFS"
 msgstr "重新啟動 XFS 服務"
 
-#: standalone/drakfont:410
-#: standalone/drakfont:420
+#: standalone/drakfont:410 standalone/drakfont:420
 #, c-format
 msgid "Suppress Fonts Files"
 msgstr "不刪除字型檔"
@@ -19591,16 +19307,17 @@ msgstr "XFS 服務重新啟動"
 #: standalone/drakfont:430
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
 "\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 "進行安裝字型前, 請務必確認您有適當的權限能夠存取使用, \n"
 "其中包含這些字型都是正確沒錯誤的。要不然, 極端情況下, \n"
 "您的 X 伺服器可能會因為不正確的字型檔案而不預期結束。"
 
-#: standalone/drakfont:474
-#: standalone/drakfont:483
+#: standalone/drakfont:474 standalone/drakfont:483
 #, c-format
 msgid "DrakFont"
 msgstr "DrakFont"
@@ -19615,9 +19332,7 @@ msgstr "字型清單"
 msgid "About"
 msgstr "關於"
 
-#: standalone/drakfont:492
-#: standalone/drakfont:687
-#: standalone/drakfont:725
+#: standalone/drakfont:492 standalone/drakfont:687 standalone/drakfont:725
 #, c-format
 msgid "Uninstall"
 msgstr "移除"
@@ -19692,9 +19407,11 @@ msgstr "選擇能夠使用該字體的應用程式："
 #: standalone/drakfont:557
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
 "\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
+"You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 "安裝任何字型前，請確認您有權限能夠安裝與使用。\n"
 "\n"
@@ -19771,14 +19488,12 @@ msgstr "選取所有項目"
 msgid "Remove List"
 msgstr "移除清單"
 
-#: standalone/drakfont:750
-#: standalone/drakfont:769
+#: standalone/drakfont:750 standalone/drakfont:769
 #, c-format
 msgid "Importing fonts"
 msgstr "正在匯入字型"
 
-#: standalone/drakfont:754
-#: standalone/drakfont:774
+#: standalone/drakfont:754 standalone/drakfont:774
 #, c-format
 msgid "Initial tests"
 msgstr "初始測試"
@@ -19808,8 +19523,7 @@ msgstr "由您的系統移除該字體檔案"
 msgid "Post Uninstall"
 msgstr "後續反安裝設定"
 
-#: standalone/drakgw:50
-#: standalone/drakvpn:51
+#: standalone/drakgw:50 standalone/drakvpn:51
 #, c-format
 msgid "Sorry, we support only 2.4 and above kernels."
 msgstr "抱歉, 目前只有支援 2.4 及更新的核心版本。"
@@ -19823,11 +19537,14 @@ msgstr "Internet 連線分享"
 #, c-format
 msgid ""
 "You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
 "\n"
-"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
 "目前要進行Internet連線分享的設定, 這個功能能夠\n"
 "讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
@@ -19879,7 +19596,9 @@ msgstr ""
 
 #: standalone/drakgw:156
 #, c-format
-msgid "Please choose what network adapter will be connected to your Local Area Network."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr "請選擇要連線到區域網路內的網路卡。"
 
 #: standalone/drakgw:177
@@ -20004,11 +19723,13 @@ msgstr "Internet 連線共享目前關閉了。"
 #, c-format
 msgid ""
 "Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP) and\n"
 " a Transparent Proxy Cache server (SQUID)."
 msgstr ""
 "每個項目都已經設定好了。\n"
-"現在您可以藉由自動網路設定 (DHCP) 及 Transparent Proxy Cache server (SQUID) 分享網路連線給其他區域網路中的電腦"
+"現在您可以藉由自動網路設定 (DHCP) 及 Transparent Proxy Cache server (SQUID) "
+"分享網路連線給其他區域網路中的電腦"
 
 #: standalone/drakgw:364
 #, c-format
@@ -20022,7 +19743,9 @@ msgstr "防火牆設定已經偵測到了!"
 
 #: standalone/drakgw:379
 #, c-format
-msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
 msgstr ""
 "警告! 偵測到現有已經存在的防火牆組態設定.\n"
 "您應該在安裝之後手動修正某些設定."
@@ -20042,7 +19765,8 @@ msgstr ""
 msgid ""
 " drakhelp 0.1\n"
 "Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU GPL.\n"
+"This is free software and may be redistributed under the terms of the GNU "
+"GPL.\n"
 "\n"
 "Usage: \n"
 msgstr ""
@@ -20054,12 +19778,15 @@ msgstr ""
 
 #: standalone/drakhelp:23
 #, c-format
-msgid " --id <id_label>       - load the html help page which refers to id_label\n"
+msgid ""
+" --id <id_label>       - load the html help page which refers to id_label\n"
 msgstr ""
 
 #: standalone/drakhelp:24
 #, c-format
-msgid " --doc <link>          - link to another web page ( for WM welcome frontend)\n"
+msgid ""
+" --doc <link>          - link to another web page ( for WM welcome "
+"frontend)\n"
 msgstr ""
 
 #: standalone/drakhelp:36
@@ -20159,8 +19886,7 @@ msgstr "紀錄檔"
 msgid "Clear logs"
 msgstr "清除紀錄檔"
 
-#: standalone/drakids:65
-#: standalone/net_applet:439
+#: standalone/drakids:65 standalone/net_applet:439
 #, c-format
 msgid "Blacklist"
 msgstr "黑名單"
@@ -20175,8 +19901,7 @@ msgstr "由黑名單中移除"
 msgid "Move to whitelist"
 msgstr "移動至黑名單"
 
-#: standalone/drakids:74
-#: standalone/net_applet:444
+#: standalone/drakids:74 standalone/net_applet:444
 #, c-format
 msgid "Whitelist"
 msgstr "白名單"
@@ -20186,14 +19911,9 @@ msgstr "白名單"
 msgid "Remove from whitelist"
 msgstr "由白名單中移除"
 
-#: standalone/drakids:134
-#: standalone/drakids:160
-#: standalone/drakids:169
-#: standalone/drakids:179
-#: standalone/drakids:246
-#: standalone/drakroam:140
-#: standalone/net_applet:180
-#: standalone/net_applet:354
+#: standalone/drakids:134 standalone/drakids:160 standalone/drakids:169
+#: standalone/drakids:179 standalone/drakids:246 standalone/drakroam:140
+#: standalone/net_applet:180 standalone/net_applet:354
 #, c-format
 msgid "Unable to contact daemon"
 msgstr "無法聯繫 daemon"
@@ -20258,14 +19978,12 @@ msgstr ""
 msgid "Error Restarting/Reloading NFS server"
 msgstr ""
 
-#: standalone/draknfs:100
-#: standalone/draksambashare:197
+#: standalone/draknfs:100 standalone/draksambashare:197
 #, c-format
 msgid "Directory Selection"
 msgstr ""
 
-#: standalone/draknfs:105
-#: standalone/draksambashare:202
+#: standalone/draknfs:105 standalone/draksambashare:202
 #, c-format
 msgid "Should be a directory."
 msgstr ""
@@ -20273,19 +19991,28 @@ msgstr ""
 #: standalone/draknfs:136
 #, c-format
 msgid ""
-"<span weight=\"bold\">NFS clients</span> may be specified in a number of ways:\n"
+"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
+"ways:\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">single host:</span> a host either by an abbreviated name recognized be the resolver, fully qualified domain name, or an IP address\n"
+"<span foreground=\"royalblue3\">single host:</span> a host either by an "
+"abbreviated name recognized be the resolver, fully qualified domain name, or "
+"an IP address\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given as @group.\n"
+"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
+"as @group.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  hosts  in the domain cs.foo.edu.\n"
+"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
+"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
+"hosts  in the domain cs.foo.edu.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">IP networks:</span> you can also export directories to all hosts on an IP (sub-)network simultaneously. for example, either `/255.255.252.0' or  `/22'  appended to the network base address result.\n"
+"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
+"directories to all hosts on an IP (sub-)network simultaneously. for example, "
+"either `/255.255.252.0' or  `/22'  appended to the network base address "
+"result.\n"
 msgstr ""
 
 #: standalone/draknfs:151
@@ -20294,16 +20021,24 @@ msgid ""
 "<span weight=\"bold\">User ID options</span>\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">map root user as anonymou:</span> map requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
+"<span foreground=\"royalblue3\">map root user as anonymou:</span> map "
+"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">allow real remote root access:</span> turn off root squashing. This option is mainly useful for diskless clients (no_root_squash).\n"
+"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
+"off root squashing. This option is mainly useful for diskless clients "
+"(no_root_squash).\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map all uids and gids to the anonymous  user (all_squash). Useful for NFS-exported public FTP directories, news spool directories, etc. The opposite option is no user UID mapping (no_all_squash), which is the default setting.\n"
+"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
+"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
+"exported public FTP directories, news spool directories, etc. The opposite "
+"option is no user UID mapping (no_all_squash), which is the default "
+"setting.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set the uid and gid of the anonymous account.\n"
+"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
+"the uid and gid of the anonymous account.\n"
 msgstr ""
 
 #: standalone/draknfs:167
@@ -20328,17 +20063,27 @@ msgstr ""
 
 #: standalone/draknfs:172
 #, c-format
-msgid "<span foreground=\"royalblue3\">%s:</span> this option requires that requests originate on an internet port less than IPPORT_RESERVED (1024). This option is on by default."
+msgid ""
+"<span foreground=\"royalblue3\">%s:</span> this option requires that "
+"requests originate on an internet port less than IPPORT_RESERVED (1024). "
+"This option is on by default."
 msgstr ""
 
 #: standalone/draknfs:173
 #, c-format
-msgid "<span foreground=\"royalblue3\">%s:</span> allow either only read or both read and write requests on this NFS volume. The default is to disallow any request which changes the filesystem. This can also be made explicit by using this option."
+msgid ""
+"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
+"read and write requests on this NFS volume. The default is to disallow any "
+"request which changes the filesystem. This can also be made explicit by "
+"using this option."
 msgstr ""
 
 #: standalone/draknfs:174
 #, c-format
-msgid "<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to violate the NFS protocol and to reply to requests before any changes made by these requests have been committed to stable storage (e.g. disc drive)."
+msgid ""
+"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
+"violate the NFS protocol and to reply to requests before any changes made by "
+"these requests have been committed to stable storage (e.g. disc drive)."
 msgstr ""
 
 #: standalone/draknfs:306
@@ -20356,8 +20101,7 @@ msgstr "進階設定協助"
 msgid "NFS directory"
 msgstr "NFS 目錄"
 
-#: standalone/draknfs:391
-#: standalone/draksambashare:588
+#: standalone/draknfs:391 standalone/draksambashare:588
 #: standalone/draksambashare:767
 #, c-format
 msgid "Directory:"
@@ -20433,8 +20177,7 @@ msgstr ""
 msgid "Custom Options"
 msgstr ""
 
-#: standalone/draknfs:539
-#: standalone/draksambashare:625
+#: standalone/draknfs:539 standalone/draksambashare:625
 #: standalone/draksambashare:792
 #, c-format
 msgid "Please enter a directory to share."
@@ -20485,27 +20228,22 @@ msgstr "自訂與系統設定"
 msgid "Editable"
 msgstr "可編輯的"
 
-#: standalone/drakperm:48
-#: standalone/drakperm:323
-#: standalone/draksambashare:95
+#: standalone/drakperm:48 standalone/drakperm:323 standalone/draksambashare:95
 #, c-format
 msgid "Path"
 msgstr "路徑"
 
-#: standalone/drakperm:48
-#: standalone/drakperm:250
+#: standalone/drakperm:48 standalone/drakperm:250
 #, c-format
 msgid "User"
 msgstr "使用者"
 
-#: standalone/drakperm:48
-#: standalone/drakperm:250
+#: standalone/drakperm:48 standalone/drakperm:250
 #, c-format
 msgid "Group"
 msgstr "群組"
 
-#: standalone/drakperm:48
-#: standalone/drakperm:335
+#: standalone/drakperm:48 standalone/drakperm:335
 #, c-format
 msgid "Permissions"
 msgstr "權限"
@@ -20515,9 +20253,7 @@ msgstr "權限"
 msgid "Add a new rule"
 msgstr ""
 
-#: standalone/drakperm:64
-#: standalone/drakperm:99
-#: standalone/drakperm:124
+#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
 #, c-format
 msgid "Edit current rule"
 msgstr "編輯目前規則"
@@ -20525,7 +20261,8 @@ msgstr "編輯目前規則"
 #: standalone/drakperm:106
 #, c-format
 msgid ""
-"Here you can see files to use in order to fix permissions, owners, and groups via msec.\n"
+"Here you can see files to use in order to fix permissions, owners, and "
+"groups via msec.\n"
 "You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 "這裡讓您可以藉由 msec 檢視以及修改重要檔案的權限、擁有者、群組等資訊。\n"
@@ -20574,12 +20311,8 @@ msgid "Delete selected rule"
 msgstr "刪除所選取的規則"
 
 #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:124
-#: standalone/drakups:302
-#: standalone/drakups:362
-#: standalone/drakups:382
-#: standalone/drakvpn:319
-#: standalone/drakvpn:680
+#: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362
+#: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680
 #: standalone/printerdrake:245
 #, c-format
 msgid "Edit"
@@ -20672,8 +20405,7 @@ msgstr "Set-GID"
 msgid "Use group id for execution"
 msgstr "執行時另外具備該群組權限"
 
-#: standalone/drakperm:292
-#: standalone/drakxtv:89
+#: standalone/drakperm:292 standalone/drakxtv:89
 #, c-format
 msgid "User:"
 msgstr "使用者："
@@ -20715,6 +20447,11 @@ msgstr ""
 msgid "SSID"
 msgstr ""
 
+#: standalone/drakroam:46
+#, c-format
+msgid "Encryption"
+msgstr "加密"
+
 #: standalone/drakroam:47
 #, c-format
 msgid "Signal strength"
@@ -20736,8 +20473,7 @@ msgid "Connect"
 msgstr "連線"
 
 #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:167
-#: standalone/printerdrake:251
+#: standalone/drakroam:167 standalone/printerdrake:251
 #, c-format
 msgid "Refresh"
 msgstr "重新載入"
@@ -20747,14 +20483,12 @@ msgstr "重新載入"
 msgid "Share directory"
 msgstr "分享的目錄"
 
-#: standalone/draksambashare:63
-#: standalone/draksambashare:96
+#: standalone/draksambashare:63 standalone/draksambashare:96
 #, c-format
 msgid "Comment"
 msgstr "註解"
 
-#: standalone/draksambashare:64
-#: standalone/draksambashare:97
+#: standalone/draksambashare:64 standalone/draksambashare:97
 #, c-format
 msgid "Browseable"
 msgstr "可瀏覽"
@@ -20764,20 +20498,17 @@ msgstr "可瀏覽"
 msgid "Public"
 msgstr "公用的"
 
-#: standalone/draksambashare:66
-#: standalone/draksambashare:102
+#: standalone/draksambashare:66 standalone/draksambashare:102
 #, c-format
 msgid "Writable"
 msgstr "可寫入"
 
-#: standalone/draksambashare:67
-#: standalone/draksambashare:143
+#: standalone/draksambashare:67 standalone/draksambashare:143
 #, c-format
 msgid "Create mask"
 msgstr "建立 mask"
 
-#: standalone/draksambashare:68
-#: standalone/draksambashare:144
+#: standalone/draksambashare:68 standalone/draksambashare:144
 #, c-format
 msgid "Directory mask"
 msgstr "目錄 mask"
@@ -20787,21 +20518,18 @@ msgstr "目錄 mask"
 msgid "Read list"
 msgstr "讀取清單"
 
-#: standalone/draksambashare:70
-#: standalone/draksambashare:103
+#: standalone/draksambashare:70 standalone/draksambashare:103
 #: standalone/draksambashare:602
 #, c-format
 msgid "Write list"
 msgstr "寫入清單"
 
-#: standalone/draksambashare:71
-#: standalone/draksambashare:135
+#: standalone/draksambashare:71 standalone/draksambashare:135
 #, c-format
 msgid "Admin users"
 msgstr "管理者"
 
-#: standalone/draksambashare:72
-#: standalone/draksambashare:136
+#: standalone/draksambashare:72 standalone/draksambashare:136
 #, c-format
 msgid "Valid users"
 msgstr "有效使用者"
@@ -20811,14 +20539,12 @@ msgstr "有效使用者"
 msgid "Inherit Permissions"
 msgstr "繼承權限"
 
-#: standalone/draksambashare:74
-#: standalone/draksambashare:137
+#: standalone/draksambashare:74 standalone/draksambashare:137
 #, c-format
 msgid "Hide dot files"
 msgstr "隱藏檔案"
 
-#: standalone/draksambashare:76
-#: standalone/draksambashare:142
+#: standalone/draksambashare:76 standalone/draksambashare:142
 #, c-format
 msgid "Preserve case"
 msgstr "保留大寫"
@@ -20833,8 +20559,7 @@ msgstr "強制建立模式"
 msgid "Force group"
 msgstr "強制群組"
 
-#: standalone/draksambashare:79
-#: standalone/draksambashare:141
+#: standalone/draksambashare:79 standalone/draksambashare:141
 #, c-format
 msgid "Default case"
 msgstr "預設大寫"
@@ -20844,8 +20569,7 @@ msgstr "預設大寫"
 msgid "Printer name"
 msgstr "印表機名稱"
 
-#: standalone/draksambashare:98
-#: standalone/draksambashare:594
+#: standalone/draksambashare:98 standalone/draksambashare:594
 #, c-format
 msgid "Printable"
 msgstr "可列印"
@@ -20865,8 +20589,7 @@ msgstr "LPQ 指令"
 msgid "Guest ok"
 msgstr "允許 guest"
 
-#: standalone/draksambashare:104
-#: standalone/draksambashare:145
+#: standalone/draksambashare:104 standalone/draksambashare:145
 #: standalone/draksambashare:603
 #, c-format
 msgid "Inherit permissions"
@@ -20947,8 +20670,7 @@ msgstr "這個精靈的目標是輕鬆地建立新的 Samba 分享。"
 msgid "Name of the share:"
 msgstr "分享的名稱："
 
-#: standalone/draksambashare:373
-#: standalone/draksambashare:587
+#: standalone/draksambashare:373 standalone/draksambashare:587
 #: standalone/draksambashare:768
 #, c-format
 msgid "Comment:"
@@ -20961,17 +20683,17 @@ msgstr "路徑："
 
 #: standalone/draksambashare:379
 #, c-format
-msgid "Share with the same name already exist or share name empty, please choose another name."
+msgid ""
+"Share with the same name already exist or share name empty, please choose "
+"another name."
 msgstr "同名的分享已經存在或未輸入分享名稱，請選擇其他名稱。"
 
-#: standalone/draksambashare:383
-#: standalone/draksambashare:389
+#: standalone/draksambashare:383 standalone/draksambashare:389
 #, c-format
 msgid "Can't create the directory, please enter a correct path."
 msgstr "無法建立該目錄，請輸入正確路徑。"
 
-#: standalone/draksambashare:386
-#: standalone/draksambashare:623
+#: standalone/draksambashare:386 standalone/draksambashare:623
 #: standalone/draksambashare:790
 #, c-format
 msgid "Please enter a Comment for this share."
@@ -20979,7 +20701,9 @@ msgstr "請輸入這個分享的註解。"
 
 #: standalone/draksambashare:417
 #, c-format
-msgid "The wizard successfully added the Samba share. Now just double click on it in treeview to modify it"
+msgid ""
+"The wizard successfully added the Samba share. Now just double click on it "
+"in treeview to modify it"
 msgstr ""
 
 #: standalone/draksambashare:433
@@ -20999,7 +20723,8 @@ msgstr ""
 
 #: standalone/draksambashare:441
 #, c-format
-msgid "Goal of this wizard is to easily create a new special printer Samba share."
+msgid ""
+"Goal of this wizard is to easily create a new special printer Samba share."
 msgstr ""
 
 #: standalone/draksambashare:449
@@ -21032,14 +20757,12 @@ msgstr ""
 msgid "Printer name:"
 msgstr ""
 
-#: standalone/draksambashare:592
-#: standalone/draksambashare:773
+#: standalone/draksambashare:592 standalone/draksambashare:773
 #, c-format
 msgid "Writable:"
 msgstr "可寫入："
 
-#: standalone/draksambashare:593
-#: standalone/draksambashare:774
+#: standalone/draksambashare:593 standalone/draksambashare:774
 #, c-format
 msgid "Browseable:"
 msgstr "可瀏覽："
@@ -21131,7 +20854,8 @@ msgstr ""
 
 #: standalone/draksambashare:796
 #, c-format
-msgid "Create mask, create mode and directory mask should be numeric. ie: 0755."
+msgid ""
+"Create mask, create mode and directory mask should be numeric. ie: 0755."
 msgstr ""
 
 #: standalone/draksambashare:803
@@ -21149,8 +20873,7 @@ msgstr ""
 msgid "User name:"
 msgstr ""
 
-#: standalone/draksambashare:929
-#: standalone/harddrake2:551
+#: standalone/draksambashare:929 standalone/harddrake2:551
 #, c-format
 msgid "Password:"
 msgstr "密碼："
@@ -21245,8 +20968,7 @@ msgstr ""
 msgid "LOCAL"
 msgstr ""
 
-#: standalone/draksec:53
-#: standalone/net_applet:449
+#: standalone/draksec:53 standalone/net_applet:449
 #, c-format
 msgid "Ignore"
 msgstr "忽略"
@@ -21260,22 +20982,31 @@ msgid ""
 "Here, you can setup the security level and administrator of your machine.\n"
 "\n"
 "\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a username or an email.\n"
+"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
+"will receive security alerts if the\n"
+"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
+"username or an email.\n"
 "\n"
 "\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive server applications:\n"
+"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
+"one of the six preconfigured security levels\n"
+"provided with msec. These levels range from '<span weight=\"bold\">poor</"
+"span>' security and ease of use, to\n"
+"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
+"server applications:\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but very\n"
-"easy to use security level. It should only be used for machines not connected to\n"
+"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
+"very\n"
+"easy to use security level. It should only be used for machines not "
+"connected to\n"
 "any network and that are not accessible to everybody.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard security\n"
-"recommended for a computer that will be used to connect to the Internet as a\n"
+"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
+"security\n"
+"recommended for a computer that will be used to connect to the Internet as "
+"a\n"
 "client.\n"
 "\n"
 "\n"
@@ -21283,18 +21014,21 @@ msgid ""
 "restrictions, and more automatic checks are run every night.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high enough\n"
-"to use the system as a server which can accept connections from many clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower level.\n"
+"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
+"enough\n"
+"to use the system as a server which can accept connections from many "
+"clients. If\n"
+"your machine is only a client on the Internet, you should choose a lower "
+"level.\n"
 "\n"
 "\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the previous\n"
+"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
+"previous\n"
 "level, but the system is entirely closed and security features are at their\n"
 "maximum"
 msgstr ""
 
-#: standalone/draksec:154
-#: standalone/harddrake2:208
+#: standalone/draksec:154 standalone/harddrake2:208
 #, c-format
 msgid ""
 "Description of the fields:\n"
@@ -21357,7 +21091,8 @@ msgstr "偵測不到系統有任何音效裝置！"
 #: standalone/draksound:50
 #, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
 "\n"
 "\n"
 "You can visit our hardware database at:\n"
@@ -21379,12 +21114,14 @@ msgid ""
 "\n"
 "\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
+"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
+"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
 msgstr ""
 "\n"
 "\n"
 "\n"
-"請注意：若是您使用的是 ISA PnP 音效卡的話, 您需要使用 alsaconf 或 sndconfig \n"
+"請注意：若是您使用的是 ISA PnP 音效卡的話, 您需要使用 alsaconf 或 "
+"sndconfig \n"
 "程式來設定。請在終端機中輸入 \"alsaconf\" 或 \"sndconfig\" 即可。"
 
 #: standalone/draksplash:30
@@ -21483,8 +21220,7 @@ msgstr ""
 msgid "Choose text color"
 msgstr ""
 
-#: standalone/draksplash:66
-#: standalone/draksplash:73
+#: standalone/draksplash:66 standalone/draksplash:73
 #, c-format
 msgid "Choose picture"
 msgstr ""
@@ -21585,7 +21321,8 @@ msgstr ""
 msgid ""
 "We're going to add an UPS device.\n"
 "\n"
-"Do you want to autodetect UPS devices connected to this machine or to manually select them?"
+"Do you want to autodetect UPS devices connected to this machine or to "
+"manually select them?"
 msgstr ""
 
 #: standalone/drakups:93
@@ -21593,8 +21330,7 @@ msgstr ""
 msgid "Autodetection"
 msgstr "自動偵測"
 
-#: standalone/drakups:101
-#: standalone/harddrake2:246
+#: standalone/drakups:101 standalone/harddrake2:246
 #, c-format
 msgid "Detection in progress"
 msgstr "正在偵測中"
@@ -21609,8 +21345,7 @@ msgstr ""
 msgid "No new UPS devices was found"
 msgstr "找不到新的 UPS 裝置"
 
-#: standalone/drakups:128
-#: standalone/drakups:140
+#: standalone/drakups:128 standalone/drakups:140
 #, c-format
 msgid "UPS driver configuration"
 msgstr "UPS 驅動程式設定"
@@ -21667,11 +21402,8 @@ msgstr ""
 msgid "UPS devices"
 msgstr "UPS 裝置"
 
-#: standalone/drakups:251
-#: standalone/drakups:270
-#: standalone/drakups:286
-#: standalone/harddrake2:85
-#: standalone/harddrake2:111
+#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
+#: standalone/harddrake2:85 standalone/harddrake2:111
 #: standalone/harddrake2:118
 #, c-format
 msgid "Name"
@@ -21702,9 +21434,7 @@ msgstr "規則"
 msgid "Action"
 msgstr "行動"
 
-#: standalone/drakups:299
-#: standalone/drakvpn:1132
-#: standalone/harddrake2:82
+#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
 #, c-format
 msgid "Level"
 msgstr "難度"
@@ -21714,9 +21444,7 @@ msgstr "難度"
 msgid "ACL name"
 msgstr "ACL 名稱"
 
-#: standalone/drakups:329
-#: standalone/drakups:333
-#: standalone/drakups:342
+#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
 #, c-format
 msgid "DrakUPS"
 msgstr "DrakUPS"
@@ -21756,15 +21484,12 @@ msgstr ""
 msgid "disable"
 msgstr "關閉"
 
-#: standalone/drakvpn:101
-#: standalone/drakvpn:127
+#: standalone/drakvpn:101 standalone/drakvpn:127
 #, c-format
 msgid "reconfigure"
 msgstr "重新設定"
 
-#: standalone/drakvpn:101
-#: standalone/drakvpn:127
-#: standalone/drakvpn:362
+#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
 #: standalone/drakvpn:721
 #, c-format
 msgid "dismiss"
@@ -21815,8 +21540,7 @@ msgstr "正在啟用 VPN..."
 msgid "The VPN connection is now enabled."
 msgstr "VPN 連線現在啟用了。"
 
-#: standalone/drakvpn:155
-#: standalone/drakvpn:183
+#: standalone/drakvpn:155 standalone/drakvpn:183
 #, c-format
 msgid "Simple VPN setup."
 msgstr "簡單的 VPN 設定。"
@@ -21883,8 +21607,7 @@ msgstr "安全性政策："
 msgid "IKE daemon racoon"
 msgstr ""
 
-#: standalone/drakvpn:281
-#: standalone/drakvpn:292
+#: standalone/drakvpn:281 standalone/drakvpn:292
 #, c-format
 msgid "Configuration file"
 msgstr "組態設定檔"
@@ -21910,8 +21633,7 @@ msgid ""
 "Simply click on Next.\n"
 msgstr ""
 
-#: standalone/drakvpn:311
-#: standalone/drakvpn:671
+#: standalone/drakvpn:311 standalone/drakvpn:671
 #, c-format
 msgid "%s entries"
 msgstr "%s 項目"
@@ -21930,23 +21652,19 @@ msgid ""
 "What would you like to do?\n"
 msgstr ""
 
-#: standalone/drakvpn:319
-#: standalone/drakvpn:680
+#: standalone/drakvpn:319 standalone/drakvpn:680
 #, c-format
 msgid ""
 "_:display here is a verb\n"
 "Display"
 msgstr "顯示"
 
-#: standalone/drakvpn:319
-#: standalone/drakvpn:680
+#: standalone/drakvpn:319 standalone/drakvpn:680
 #, c-format
 msgid "Commit"
 msgstr "送出"
 
-#: standalone/drakvpn:333
-#: standalone/drakvpn:337
-#: standalone/drakvpn:695
+#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
 #: standalone/drakvpn:699
 #, c-format
 msgid ""
@@ -21999,15 +21717,12 @@ msgstr "conn %default"
 msgid "normal conn"
 msgstr "一般 conn"
 
-#: standalone/drakvpn:368
-#: standalone/drakvpn:409
-#: standalone/drakvpn:496
+#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
 #, c-format
 msgid "Exists!"
 msgstr "已存在！"
 
-#: standalone/drakvpn:369
-#: standalone/drakvpn:410
+#: standalone/drakvpn:369 standalone/drakvpn:410
 #, c-format
 msgid ""
 "A section with this name already exists.\n"
@@ -22092,32 +21807,27 @@ msgstr ""
 msgid "disablearrivalcheck"
 msgstr ""
 
-#: standalone/drakvpn:441
-#: standalone/drakvpn:480
+#: standalone/drakvpn:441 standalone/drakvpn:480
 #, c-format
 msgid "left"
 msgstr "[左]"
 
-#: standalone/drakvpn:442
-#: standalone/drakvpn:481
+#: standalone/drakvpn:442 standalone/drakvpn:481
 #, c-format
 msgid "leftcert"
 msgstr ""
 
-#: standalone/drakvpn:443
-#: standalone/drakvpn:482
+#: standalone/drakvpn:443 standalone/drakvpn:482
 #, c-format
 msgid "leftrsasigkey"
 msgstr ""
 
-#: standalone/drakvpn:444
-#: standalone/drakvpn:483
+#: standalone/drakvpn:444 standalone/drakvpn:483
 #, c-format
 msgid "leftsubnet"
 msgstr ""
 
-#: standalone/drakvpn:445
-#: standalone/drakvpn:484
+#: standalone/drakvpn:445 standalone/drakvpn:484
 #, c-format
 msgid "leftnexthop"
 msgstr ""
@@ -22191,8 +21901,7 @@ msgid ""
 "Choose continue when you are done to write the data.\n"
 msgstr ""
 
-#: standalone/drakvpn:562
-#: standalone/drakvpn:812
+#: standalone/drakvpn:562 standalone/drakvpn:812
 #, fuzzy, c-format
 msgid "Edit section"
 msgstr "路徑選擇"
@@ -22206,9 +21915,7 @@ msgid ""
 "and then click on next.\n"
 msgstr ""
 
-#: standalone/drakvpn:566
-#: standalone/drakvpn:646
-#: standalone/drakvpn:817
+#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
 #: standalone/drakvpn:863
 #, fuzzy, c-format
 msgid "Section names"
@@ -22268,14 +21975,12 @@ msgid ""
 "Choose continue when you are done to write the data.\n"
 msgstr ""
 
-#: standalone/drakvpn:642
-#: standalone/drakvpn:859
+#: standalone/drakvpn:642 standalone/drakvpn:859
 #, fuzzy, c-format
 msgid "Remove section"
 msgstr "移除清單"
 
-#: standalone/drakvpn:643
-#: standalone/drakvpn:860
+#: standalone/drakvpn:643 standalone/drakvpn:860
 #, c-format
 msgid ""
 "Your %s file has several sections or connections.\n"
@@ -22380,8 +22085,7 @@ msgid ""
 "Pre-shared key authentication method in phase 1."
 msgstr ""
 
-#: standalone/drakvpn:756
-#: standalone/drakvpn:849
+#: standalone/drakvpn:756 standalone/drakvpn:849
 #, fuzzy, c-format
 msgid "real file"
 msgstr "選擇檔案"
@@ -22637,7 +22341,8 @@ msgid ""
 "        lifetime time 60 sec;\n"
 "\tlifetime time 12 hour;\n"
 "\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and 'hour'.\n"
+"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
+"'hour'.\n"
 msgstr ""
 
 #: standalone/drakvpn:1019
@@ -22696,16 +22401,12 @@ msgstr ""
 msgid "Generate policy"
 msgstr "安全性"
 
-#: standalone/drakvpn:1047
-#: standalone/drakvpn:1063
-#: standalone/drakvpn:1076
+#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
 #, c-format
 msgid "off"
 msgstr "關"
 
-#: standalone/drakvpn:1047
-#: standalone/drakvpn:1063
-#: standalone/drakvpn:1076
+#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
 #, c-format
 msgid "on"
 msgstr "於"
@@ -22873,8 +22574,7 @@ msgstr "目的 IP 範圍"
 msgid "Upper-layer protocol"
 msgstr "Europe 通訊協定"
 
-#: standalone/drakvpn:1122
-#: standalone/drakvpn:1129
+#: standalone/drakvpn:1122 standalone/drakvpn:1129
 #, c-format
 msgid "any"
 msgstr "任何"
@@ -23055,7 +22755,8 @@ msgstr "系統偵測不到任何電視卡！"
 #: standalone/drakxtv:151
 #, c-format
 msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n"
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
 "You can visit our hardware database at:\n"
@@ -23083,19 +22784,22 @@ msgstr "可供您的音效卡額外可選擇的驅動程式清單"
 
 #: standalone/harddrake2:29
 #, c-format
-msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr "該裝置目前安插上了多少個實體 bug 裝置 (比方：PCI、USB 等等...)"
 
-#: standalone/harddrake2:31
-#: standalone/harddrake2:146
+#: standalone/harddrake2:31 standalone/harddrake2:146
 #, c-format
 msgid "Bus identification"
 msgstr "匯流排描述"
 
 #: standalone/harddrake2:32
 #, c-format
-msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids"
-msgstr "- PCI 與 USB 裝置：這列出了廠商名稱、裝置名稱、附屬廠商與 PCI/USB IDS 資訊"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI 與 USB 裝置：這列出了廠商名稱、裝置名稱、附屬廠商與 PCI/USB IDS 資訊"
 
 #: standalone/harddrake2:35
 #, c-format
@@ -23189,8 +22893,7 @@ msgstr ""
 msgid "class of hardware device"
 msgstr "硬體裝置類別"
 
-#: standalone/harddrake2:51
-#: standalone/harddrake2:83
+#: standalone/harddrake2:51 standalone/harddrake2:83
 #: standalone/printerdrake:224
 #, c-format
 msgid "Model"
@@ -23308,7 +23011,10 @@ msgstr ""
 
 #: standalone/harddrake2:66
 #, c-format
-msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu."
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
 #: standalone/harddrake2:67
@@ -23359,8 +23065,13 @@ msgstr "頻率 (MHz)"
 
 #: standalone/harddrake2:73
 #, c-format
-msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
-msgstr "CPU 的工作頻率，以 MHz 為單位 (百萬赫茲，一般而言近似於 CPU 每秒能夠處理的指令數)"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"CPU 的工作頻率，以 MHz 為單位 (百萬赫茲，一般而言近似於 CPU 每秒能夠處理的指"
+"令數)"
 
 #: standalone/harddrake2:74
 #, c-format
@@ -23379,7 +23090,10 @@ msgstr ""
 
 #: standalone/harddrake2:76
 #, c-format
-msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)"
+msgid ""
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
 #: standalone/harddrake2:77
@@ -23419,7 +23133,9 @@ msgstr ""
 
 #: standalone/harddrake2:81
 #, c-format
-msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 msgstr ""
 
 #: standalone/harddrake2:82
@@ -23479,7 +23195,10 @@ msgstr "寫入保護"
 
 #: standalone/harddrake2:89
 #, c-format
-msgid "the WP flag in the CR0 register of the cpu enforce write protection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)"
+msgid ""
+"the WP flag in the CR0 register of the cpu enforce write protection at the "
+"memory page level, thus enabling the processor to prevent unchecked kernel "
+"accesses to user memory (aka this is a bug guard)"
 msgstr ""
 
 #: standalone/harddrake2:93
@@ -23520,7 +23239,8 @@ msgstr "本機密碼檔"
 #: standalone/harddrake2:99
 #, c-format
 msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely identified by a\n"
+"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
+"identified by a\n"
 "channel number, a target id and a logical unit number"
 msgstr ""
 
@@ -23577,7 +23297,8 @@ msgstr "裝置檔案"
 
 #: standalone/harddrake2:115
 #, c-format
-msgid "the device file used to communicate with the kernel driver for the mouse"
+msgid ""
+"the device file used to communicate with the kernel driver for the mouse"
 msgstr "這隻滑鼠用來與核心驅動程式溝通的裝置檔案"
 
 #: standalone/harddrake2:116
@@ -23625,17 +23346,14 @@ msgstr ""
 msgid "the protocol that the graphical desktop use with the mouse"
 msgstr ""
 
-#: standalone/harddrake2:128
-#: standalone/harddrake2:137
-#: standalone/harddrake2:144
-#: standalone/harddrake2:152
+#: standalone/harddrake2:128 standalone/harddrake2:137
+#: standalone/harddrake2:144 standalone/harddrake2:152
 #: standalone/harddrake2:319
 #, c-format
 msgid "Identification"
 msgstr "辨別身份"
 
-#: standalone/harddrake2:129
-#: standalone/harddrake2:145
+#: standalone/harddrake2:129 standalone/harddrake2:145
 #, c-format
 msgid "Connection"
 msgstr "連線"
@@ -23671,22 +23389,16 @@ msgid "Features"
 msgstr "功能"
 
 #. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:176
-#: standalone/logdrake:76
-#: standalone/printerdrake:146
-#: standalone/printerdrake:159
+#: standalone/harddrake2:176 standalone/logdrake:76
+#: standalone/printerdrake:146 standalone/printerdrake:159
 #: standalone/printerdrake:171
 #, c-format
 msgid "/_Options"
 msgstr "/選項 (_O)"
 
-#: standalone/harddrake2:177
-#: standalone/harddrake2:203
-#: standalone/logdrake:78
-#: standalone/printerdrake:172
-#: standalone/printerdrake:174
-#: standalone/printerdrake:177
-#: standalone/printerdrake:179
+#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
+#: standalone/printerdrake:172 standalone/printerdrake:174
+#: standalone/printerdrake:177 standalone/printerdrake:179
 #, c-format
 msgid "/_Help"
 msgstr "/說明 (_H)"
@@ -23716,8 +23428,7 @@ msgstr ""
 msgid "/_Upload the hardware list"
 msgstr ""
 
-#: standalone/harddrake2:192
-#: standalone/printerdrake:152
+#: standalone/harddrake2:192 standalone/printerdrake:152
 #, c-format
 msgid "/_Quit"
 msgstr "/結束 (_Q)"
@@ -23734,17 +23445,17 @@ msgstr "Harddrake 說明"
 
 #: standalone/harddrake2:216
 #, c-format
-msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: standalone/harddrake2:222
-#: standalone/printerdrake:177
+#: standalone/harddrake2:222 standalone/printerdrake:177
 #, c-format
 msgid "/_Report Bug"
 msgstr "/報告錯誤 (_R)"
 
-#: standalone/harddrake2:224
-#: standalone/printerdrake:179
+#: standalone/harddrake2:224 standalone/printerdrake:179
 #, c-format
 msgid "/_About..."
 msgstr "/關於 (_A)"
@@ -23760,12 +23471,14 @@ msgstr "關於 Harddrake"
 msgid ""
 "This is HardDrake, a %s hardware configuration tool.\n"
 "<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud@mandriva.com&gt;\n"
+"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
+"tvignaud@mandriva.com&gt;\n"
 "\n"
 msgstr ""
 "這是 HardDrake ，一個 %s 硬體檢視設定工具。\n"
 "<span foreground=\"royalblue3\">版本：</span> %s\n"
-"<span foreground=\"royalblue3\">作者:</span> Thierry Vignaud &lt;tvignaud@mandriva.com&gt;\n"
+"<span foreground=\"royalblue3\">作者:</span> Thierry Vignaud &lt;"
+"tvignaud@mandriva.com&gt;\n"
 "\n"
 
 #: standalone/harddrake2:242
@@ -23788,16 +23501,13 @@ msgstr "設定模組"
 msgid "Run config tool"
 msgstr "執行設定程式"
 
-#: standalone/harddrake2:306
-#: standalone/net_monitor:102
-#: standalone/net_monitor:103
-#: standalone/net_monitor:108
+#: standalone/harddrake2:306 standalone/net_monitor:102
+#: standalone/net_monitor:103 standalone/net_monitor:108
 #, c-format
 msgid "unknown"
 msgstr "不詳"
 
-#: standalone/harddrake2:307
-#: standalone/printerdrake:306
+#: standalone/harddrake2:307 standalone/printerdrake:306
 #: standalone/printerdrake:320
 #, c-format
 msgid "Unknown"
@@ -23810,7 +23520,8 @@ msgstr "其它"
 
 #: standalone/harddrake2:342
 #, c-format
-msgid "Click on a device in the left tree in order to display its information here."
+msgid ""
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
 
 #: standalone/harddrake2:394
@@ -23833,8 +23544,7 @@ msgstr "燒錄器"
 msgid "DVD"
 msgstr "DVD"
 
-#: standalone/harddrake2:545
-#: standalone/harddrake2:548
+#: standalone/harddrake2:545 standalone/harddrake2:548
 #, c-format
 msgid "Upload the hardware list"
 msgstr "上傳硬體清單"
@@ -23870,8 +23580,7 @@ msgid "You should install the following packages: %s"
 msgstr "您應該安裝下列套件： %s"
 
 #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: standalone/localedrake:47
-#: standalone/scannerdrake:135
+#: standalone/localedrake:47 standalone/scannerdrake:135
 #, c-format
 msgid ", "
 msgstr ", "
@@ -23984,9 +23693,7 @@ msgstr "尋找"
 msgid "A tool to monitor your logs"
 msgstr "監察記錄檔的工具"
 
-#: standalone/logdrake:128
-#: standalone/net_applet:316
-#: standalone/net_monitor:93
+#: standalone/logdrake:128 standalone/net_applet:316 standalone/net_monitor:93
 #, c-format
 msgid "Settings"
 msgstr "設定"
@@ -24016,8 +23723,7 @@ msgstr "行事曆"
 msgid "Content of the file"
 msgstr "檔案內容"
 
-#: standalone/logdrake:161
-#: standalone/logdrake:399
+#: standalone/logdrake:161 standalone/logdrake:399
 #, c-format
 msgid "Mail alert"
 msgstr "郵件警示"
@@ -24105,7 +23811,9 @@ msgstr "服務設定"
 
 #: standalone/logdrake:414
 #, c-format
-msgid "You will receive an alert if one of the selected services is no longer running"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
 msgstr "若是您所選取的服務項目沒有執行的話，您將會收到警示通知"
 
 #: standalone/logdrake:421
@@ -24186,14 +23894,12 @@ msgstr "網路已經由介面 %s 啟動"
 msgid "Network is down on interface %s. Click on \"Configure Network\""
 msgstr "網路介面 %s 是關閉的。請點選 \"設定網路\""
 
-#: standalone/net_applet:56
-#: standalone/net_monitor:468
+#: standalone/net_applet:56 standalone/net_monitor:468
 #, c-format
 msgid "Connect %s"
 msgstr "連線到 %s"
 
-#: standalone/net_applet:57
-#: standalone/net_monitor:468
+#: standalone/net_applet:57 standalone/net_monitor:468
 #, c-format
 msgid "Disconnect %s"
 msgstr "中斷與 %s 的連線"
@@ -24308,8 +24014,7 @@ msgstr "ICMP 的攻擊型態： %s"
 msgid "Always blacklist (do not ask again)"
 msgstr "總是自動列入黑名單 (不要再問)"
 
-#: standalone/net_monitor:57
-#: standalone/net_monitor:62
+#: standalone/net_monitor:57 standalone/net_monitor:62
 #, c-format
 msgid "Network Monitoring"
 msgstr "網路監控"
@@ -24366,14 +24071,12 @@ msgstr "對接收與傳送使用相同的度量"
 msgid "Wait please, testing your connection..."
 msgstr "請稍候，正在測試您的連線..."
 
-#: standalone/net_monitor:182
-#: standalone/net_monitor:195
+#: standalone/net_monitor:182 standalone/net_monitor:195
 #, c-format
 msgid "Disconnecting from Internet "
 msgstr "正在中斷與網際網路的連線"
 
-#: standalone/net_monitor:182
-#: standalone/net_monitor:195
+#: standalone/net_monitor:182 standalone/net_monitor:195
 #, c-format
 msgid "Connecting to Internet "
 msgstr "連線到網際網路"
@@ -24407,14 +24110,12 @@ msgstr ""
 msgid "Color configuration"
 msgstr "顏色設定"
 
-#: standalone/net_monitor:383
-#: standalone/net_monitor:403
+#: standalone/net_monitor:383 standalone/net_monitor:403
 #, c-format
 msgid "sent: "
 msgstr "傳送："
 
-#: standalone/net_monitor:390
-#: standalone/net_monitor:407
+#: standalone/net_monitor:390 standalone/net_monitor:407
 #, c-format
 msgid "received: "
 msgstr "接收："
@@ -24431,7 +24132,9 @@ msgstr "LocaleDrake"
 
 #: standalone/net_monitor:461
 #, c-format
-msgid "Warning, another internet connection has been detected, maybe using your network"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
 msgstr "警告，偵測到您系統上有其他的網路連線，也許正在使用您的網路服務"
 
 #: standalone/net_monitor:472
@@ -24449,19 +24152,15 @@ msgstr "正在讀取已安裝的印表機的資料..."
 msgid "%s Printer Management Tool"
 msgstr "%s 印表機管理工具"
 
-#: standalone/printerdrake:142
-#: standalone/printerdrake:143
-#: standalone/printerdrake:144
-#: standalone/printerdrake:145
-#: standalone/printerdrake:153
-#: standalone/printerdrake:154
+#: standalone/printerdrake:142 standalone/printerdrake:143
+#: standalone/printerdrake:144 standalone/printerdrake:145
+#: standalone/printerdrake:153 standalone/printerdrake:154
 #: standalone/printerdrake:158
 #, c-format
 msgid "/_Actions"
 msgstr "/動作 (_A)"
 
-#: standalone/printerdrake:142
-#: standalone/printerdrake:154
+#: standalone/printerdrake:142 standalone/printerdrake:154
 #, c-format
 msgid "/_Add Printer"
 msgstr "/新增印表機 (_A)"
@@ -24511,14 +24210,12 @@ msgstr "搜尋："
 msgid "Apply filter"
 msgstr "套用過濾器"
 
-#: standalone/printerdrake:224
-#: standalone/printerdrake:231
+#: standalone/printerdrake:224 standalone/printerdrake:231
 #, c-format
 msgid "Def."
 msgstr "預設"
 
-#: standalone/printerdrake:224
-#: standalone/printerdrake:231
+#: standalone/printerdrake:224 standalone/printerdrake:231
 #, c-format
 msgid "Printer Name"
 msgstr "印表機名稱"
@@ -24581,18 +24278,14 @@ msgstr "設定 CUPS"
 msgid "Configure CUPS printing system"
 msgstr "設定 CUPS 列印系統"
 
-#: standalone/printerdrake:310
-#: standalone/printerdrake:324
-#: standalone/printerdrake:348
-#: standalone/printerdrake:360
+#: standalone/printerdrake:310 standalone/printerdrake:324
+#: standalone/printerdrake:348 standalone/printerdrake:360
 #, c-format
 msgid "Enabled"
 msgstr "使用"
 
-#: standalone/printerdrake:310
-#: standalone/printerdrake:324
-#: standalone/printerdrake:348
-#: standalone/printerdrake:360
+#: standalone/printerdrake:310 standalone/printerdrake:324
+#: standalone/printerdrake:348 standalone/printerdrake:360
 #, c-format
 msgid "Disabled"
 msgstr "不使用"
@@ -24626,7 +24319,8 @@ msgstr "略過 Scannerdrake。"
 
 #: standalone/scannerdrake:60
 #, c-format
-msgid "Could not install the packages needed to set up a scanner with Scannerdrake."
+msgid ""
+"Could not install the packages needed to set up a scanner with Scannerdrake."
 msgstr "無法安裝使用 Scannerdrake 設定掃描器所需的套件。"
 
 #: standalone/scannerdrake:61
@@ -24634,20 +24328,17 @@ msgstr "無法安裝使用 Scannerdrake 設定掃描器所需的套件。"
 msgid "Scannerdrake will not be started now."
 msgstr "Scannerdrake 將不會啟動。"
 
-#: standalone/scannerdrake:67
-#: standalone/scannerdrake:491
+#: standalone/scannerdrake:67 standalone/scannerdrake:491
 #, c-format
 msgid "Searching for configured scanners..."
 msgstr "正在尋找已經設定好的掃描器..."
 
-#: standalone/scannerdrake:71
-#: standalone/scannerdrake:495
+#: standalone/scannerdrake:71 standalone/scannerdrake:495
 #, c-format
 msgid "Searching for new scanners..."
 msgstr "正在尋找新的掃描器..."
 
-#: standalone/scannerdrake:79
-#: standalone/scannerdrake:517
+#: standalone/scannerdrake:79 standalone/scannerdrake:517
 #, c-format
 msgid "Re-generating list of configured scanners..."
 msgstr "重新產生設定好的掃描器的列單..."
@@ -24687,8 +24378,7 @@ msgstr "偵測到的型號： %s"
 msgid "Port: %s"
 msgstr "連接埠： %s"
 
-#: standalone/scannerdrake:138
-#: standalone/scannerdrake:141
+#: standalone/scannerdrake:138 standalone/scannerdrake:141
 #, c-format
 msgid " (UNSUPPORTED)"
 msgstr " (不支援)"
@@ -24698,38 +24388,40 @@ msgstr " (不支援)"
 msgid "The %s is not supported under Linux."
 msgstr "%s 不被 Linux 所支援。"
 
-#: standalone/scannerdrake:171
-#: standalone/scannerdrake:185
+#: standalone/scannerdrake:171 standalone/scannerdrake:185
 #, c-format
 msgid "Do not install firmware file"
 msgstr "不要安裝韌體檔"
 
-#: standalone/scannerdrake:175
-#: standalone/scannerdrake:227
+#: standalone/scannerdrake:175 standalone/scannerdrake:227
 #, c-format
-msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on."
+msgid ""
+"It is possible that your %s needs its firmware to be uploaded everytime when "
+"it is turned on."
 msgstr "您的 %s 可能每次啟動時都需要下載它的韌體檔。"
 
-#: standalone/scannerdrake:176
-#: standalone/scannerdrake:228
+#: standalone/scannerdrake:176 standalone/scannerdrake:228
 #, c-format
 msgid "If this is the case, you can make this be done automatically."
 msgstr "如果是這種情況，您可以自動的完成這個工作。"
 
-#: standalone/scannerdrake:177
-#: standalone/scannerdrake:231
+#: standalone/scannerdrake:177 standalone/scannerdrake:231
 #, c-format
-msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed."
+msgid ""
+"To do so, you need to supply the firmware file for your scanner so that it "
+"can be installed."
 msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。"
 
-#: standalone/scannerdrake:178
-#: standalone/scannerdrake:232
+#: standalone/scannerdrake:178 standalone/scannerdrake:232
 #, c-format
-msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition."
-msgstr "您可以在隨著您掃描器附上的光碟或磁片、廠商的網頁、或者是您的 Windows 磁區上找到這個檔案。"
+msgid ""
+"You find the file on the CD or floppy coming with the scanner, on the "
+"manufacturer's home page, or on your Windows partition."
+msgstr ""
+"您可以在隨著您掃描器附上的光碟或磁片、廠商的網頁、或者是您的 Windows 磁區上找"
+"到這個檔案。"
 
-#: standalone/scannerdrake:180
-#: standalone/scannerdrake:239
+#: standalone/scannerdrake:180 standalone/scannerdrake:239
 #, c-format
 msgid "Install firmware file from"
 msgstr "安裝韌體檔，由"
@@ -24739,25 +24431,30 @@ msgstr "安裝韌體檔，由"
 msgid "Select firmware file"
 msgstr "選擇韌體檔案"
 
-#: standalone/scannerdrake:203
-#: standalone/scannerdrake:262
+#: standalone/scannerdrake:203 standalone/scannerdrake:262
 #, c-format
 msgid "The firmware file %s does not exist or is unreadable!"
 msgstr "韌體檔 %s 不存在或者無法讀取！"
 
 #: standalone/scannerdrake:226
 #, c-format
-msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on."
+msgid ""
+"It is possible that your scanners need their firmware to be uploaded "
+"everytime when they are turned on."
 msgstr "這可能是因為您的掃描器每次啟動時都需要下載它的韌體檔。"
 
 #: standalone/scannerdrake:230
 #, c-format
-msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed."
+msgid ""
+"To do so, you need to supply the firmware files for your scanners so that it "
+"can be installed."
 msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。"
 
 #: standalone/scannerdrake:233
 #, c-format
-msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file."
+msgid ""
+"If you have already installed your scanner's firmware you can update the "
+"firmware here by supplying the new firmware file."
 msgstr ""
 
 #: standalone/scannerdrake:235
@@ -24792,15 +24489,13 @@ msgid ""
 "You can launch printerdrake from the %s Control Center in Hardware section."
 msgstr ""
 
-#: standalone/scannerdrake:308
-#: standalone/scannerdrake:315
+#: standalone/scannerdrake:308 standalone/scannerdrake:315
 #: standalone/scannerdrake:345
 #, c-format
 msgid "Auto-detect available ports"
 msgstr "自動偵測可用的埠"
 
-#: standalone/scannerdrake:310
-#: standalone/scannerdrake:356
+#: standalone/scannerdrake:310 standalone/scannerdrake:356
 #, c-format
 msgid "Please select the device where your %s is attached"
 msgstr ""
@@ -24810,8 +24505,7 @@ msgstr ""
 msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr "(注意：平行埠無法自動偵測)"
 
-#: standalone/scannerdrake:313
-#: standalone/scannerdrake:358
+#: standalone/scannerdrake:313 standalone/scannerdrake:358
 #, c-format
 msgid "choose device"
 msgstr "選取裝置"
@@ -24826,8 +24520,7 @@ msgstr "正在尋找掃描器..."
 msgid "Setting up kernel modules..."
 msgstr "正在設定核心模組..."
 
-#: standalone/scannerdrake:390
-#: standalone/scannerdrake:397
+#: standalone/scannerdrake:390 standalone/scannerdrake:397
 #, c-format
 msgid "Attention!"
 msgstr "注意！"
@@ -24837,29 +24530,36 @@ msgstr "注意！"
 msgid ""
 "Your %s cannot be configured fully automatically.\n"
 "\n"
-"Manual adjustments are required. Please edit the configuration file /etc/sane.d/%s.conf. "
+"Manual adjustments are required. Please edit the configuration file /etc/"
+"sane.d/%s.conf. "
 msgstr ""
 
-#: standalone/scannerdrake:392
-#: standalone/scannerdrake:401
+#: standalone/scannerdrake:392 standalone/scannerdrake:401
 #, c-format
-msgid "More info in the driver's manual page. Run the command \"man sane-%s\" to read it."
+msgid ""
+"More info in the driver's manual page. Run the command \"man sane-%s\" to "
+"read it."
 msgstr ""
 
-#: standalone/scannerdrake:394
-#: standalone/scannerdrake:403
+#: standalone/scannerdrake:394 standalone/scannerdrake:403
 #, c-format
-msgid "After that you may scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
+msgid ""
+"After that you may scan documents using \"XSane\" or \"Kooka\" from "
+"Multimedia/Graphics in the applications menu."
 msgstr ""
 
 #: standalone/scannerdrake:398
 #, c-format
-msgid "Your %s has been configured, but it is possible that additional manual adjustments are needed to get it to work. "
+msgid ""
+"Your %s has been configured, but it is possible that additional manual "
+"adjustments are needed to get it to work. "
 msgstr ""
 
 #: standalone/scannerdrake:399
 #, c-format
-msgid "If it does not appear in the list of configured scanners in the main window of Scannerdrake or if it does not work correctly, "
+msgid ""
+"If it does not appear in the list of configured scanners in the main window "
+"of Scannerdrake or if it does not work correctly, "
 msgstr ""
 
 #: standalone/scannerdrake:400
@@ -24871,7 +24571,8 @@ msgstr "編輯設定檔 /etc/sane.d/%s.conf。"
 #, c-format
 msgid ""
 "Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
+"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
+"Graphics in the applications menu."
 msgstr ""
 
 #: standalone/scannerdrake:431
@@ -24900,8 +24601,7 @@ msgstr ""
 "%s\n"
 "可以在您的系統上使用。\n"
 
-#: standalone/scannerdrake:435
-#: standalone/scannerdrake:438
+#: standalone/scannerdrake:435 standalone/scannerdrake:438
 #, c-format
 msgid "There are no scanners found which are available on your system.\n"
 msgstr "沒有找到可以在您系統上使用的掃描器。\n"
@@ -24926,26 +24626,28 @@ msgstr "安裝/更新韌體"
 msgid "Scanner sharing"
 msgstr "掃描器分享"
 
-#: standalone/scannerdrake:530
-#: standalone/scannerdrake:695
+#: standalone/scannerdrake:530 standalone/scannerdrake:695
 #, c-format
 msgid "All remote machines"
 msgstr "所有的遠端機器"
 
-#: standalone/scannerdrake:542
-#: standalone/scannerdrake:845
+#: standalone/scannerdrake:542 standalone/scannerdrake:845
 #, c-format
 msgid "This machine"
 msgstr "本機"
 
 #: standalone/scannerdrake:582
 #, c-format
-msgid "Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines."
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessible by remote machines and by which remote machines."
 msgstr ""
 
 #: standalone/scannerdrake:583
 #, c-format
-msgid "You can also decide here whether scanners on remote machines should be made available on this machine."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
 
 #: standalone/scannerdrake:586
@@ -24968,8 +24670,7 @@ msgstr "使用遠端電腦上的掃描器"
 msgid "Use the scanners on hosts: "
 msgstr "使用掃描器於主機："
 
-#: standalone/scannerdrake:632
-#: standalone/scannerdrake:704
+#: standalone/scannerdrake:632 standalone/scannerdrake:704
 #: standalone/scannerdrake:854
 #, c-format
 msgid "Sharing of local scanners"
@@ -24977,53 +24678,45 @@ msgstr "本地端掃描器分享"
 
 #: standalone/scannerdrake:633
 #, c-format
-msgid "These are the machines on which the locally connected scanner(s) should be available:"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
 msgstr ""
 
-#: standalone/scannerdrake:644
-#: standalone/scannerdrake:794
+#: standalone/scannerdrake:644 standalone/scannerdrake:794
 #, c-format
 msgid "Add host"
 msgstr "新增主機"
 
-#: standalone/scannerdrake:650
-#: standalone/scannerdrake:800
+#: standalone/scannerdrake:650 standalone/scannerdrake:800
 #, c-format
 msgid "Edit selected host"
 msgstr "編輯選擇的主機"
 
-#: standalone/scannerdrake:659
-#: standalone/scannerdrake:809
+#: standalone/scannerdrake:659 standalone/scannerdrake:809
 #, c-format
 msgid "Remove selected host"
 msgstr "移除選取的主機"
 
-#: standalone/scannerdrake:683
-#: standalone/scannerdrake:691
-#: standalone/scannerdrake:696
-#: standalone/scannerdrake:742
-#: standalone/scannerdrake:833
-#: standalone/scannerdrake:841
-#: standalone/scannerdrake:846
-#: standalone/scannerdrake:892
+#: standalone/scannerdrake:683 standalone/scannerdrake:691
+#: standalone/scannerdrake:696 standalone/scannerdrake:742
+#: standalone/scannerdrake:833 standalone/scannerdrake:841
+#: standalone/scannerdrake:846 standalone/scannerdrake:892
 #, c-format
 msgid "Name/IP address of host:"
 msgstr "主機的名稱/IP 位址："
 
-#: standalone/scannerdrake:705
-#: standalone/scannerdrake:855
+#: standalone/scannerdrake:705 standalone/scannerdrake:855
 #, c-format
 msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: standalone/scannerdrake:716
-#: standalone/scannerdrake:866
+#: standalone/scannerdrake:716 standalone/scannerdrake:866
 #, c-format
 msgid "You must enter a host name or an IP address.\n"
 msgstr "請輸入主機名稱或是 IP\n"
 
-#: standalone/scannerdrake:727
-#: standalone/scannerdrake:877
+#: standalone/scannerdrake:727 standalone/scannerdrake:877
 #, c-format
 msgid "This host is already in the list, it cannot be added again.\n"
 msgstr "這個主機已經存在於列表中，無法重複新增\n"
@@ -25049,8 +24742,7 @@ msgstr ""
 "\n"
 "您要安裝 saned 套件嗎？"
 
-#: standalone/scannerdrake:944
-#: standalone/scannerdrake:948
+#: standalone/scannerdrake:944 standalone/scannerdrake:948
 #, c-format
 msgid "Your scanner(s) will not be available on the network."
 msgstr "您的掃描器將無法從網路上使用。"
@@ -25241,14 +24933,19 @@ msgstr "安裝失敗"
 
 #~ msgid "Use Idmap for store UID/SID "
 #~ msgstr "使用 ldmap 來儲存 UID/SID"
+
 #~ msgid "Default Idmap "
 #~ msgstr "預設 Idmap"
+
 #~ msgid "Please wait, preparing installation..."
 #~ msgstr "請稍候，正在準備安裝..."
+
 #~ msgid "Installing package %s"
 #~ msgstr "正在安裝套件 %s"
+
 #~ msgid "Connect to the Internet"
 #~ msgstr "連線到 Internet"
+
 #~ msgid ""
 #~ "The most common way to connect with adsl is pppoe.\n"
 #~ "Some connections use PPTP, a few use DHCP.\n"
@@ -25257,114 +24954,166 @@ msgstr "安裝失敗"
 #~ "最常連線到 ADSL 的方法就是使用 pppoe.\n"
 #~ "有些連線是使用 PPTP, 有些事使用 DHCP.\n"
 #~ "若是您不清楚的話, 選擇 '使用 PPPoE'"
+
 #~ msgid "<b>What is Mandriva Linux?</b>"
 #~ msgstr "<b>Mandriva Linux 是什麼？</b>"
+
 #~ msgid "Welcome to <b>Mandriva Linux</b>!"
 #~ msgstr "歡迎來到 <b>Mandriva Linux</b>!"
+
 #~ msgid "<b>Open Source</b>"
 #~ msgstr "<b>開放原始碼</b>"
+
 #~ msgid "Welcome to the <b>world of open source</b>!"
 #~ msgstr "歡迎來到<b>開放原始碼的世界</b>！"
+
 #~ msgid "<b>The GPL</b>"
 #~ msgstr "<b>The GPL</b>"
+
 #~ msgid "<b>Join the Community</b>"
 #~ msgstr "<b>參與社群</b>"
+
 #~ msgid "<b>Download Version</b>"
 #~ msgstr "<b>下載版本</b>"
+
 #~ msgid "<b>Discovery, Your First Linux Desktop</b>"
 #~ msgstr "<b>Discovery, 您的第一個 Linux 桌面</b>"
+
 #~ msgid "You are now installing <b>Mandriva Linux Discovery</b>."
 #~ msgstr "您正在安裝 <b>Mandriva Linux Discovery</b>."
+
 #~ msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
 #~ msgstr "<b>PowerPack, 終極的 Linux 桌面</b>"
+
 #~ msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
 #~ msgstr "您正在安裝 <b>Mandriva Linux PowerPack</b>."
+
 #~ msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
 #~ msgstr "<b>PowerPack+, 桌面和伺服器的 Linux 解決方案</b>"
+
 #~ msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
 #~ msgstr "您正在安裝 <b>Mandriva Linux PowerPack+</b>."
+
 #~ msgid "<b>Mandriva Products</b>"
 #~ msgstr "<b>Mandriva 的產品線</b>"
+
 #~ msgid "<b>Choose your Favorite Desktop Environment</b>"
 #~ msgstr "<b>選擇您最喜歡的桌面環境</b>"
+
 #~ msgid "<b>OpenOffice.org</b>"
 #~ msgstr "<b>OpenOffice.org</b>"
+
 #~ msgid "<b>Kontact</b>"
 #~ msgstr "<b>Kontact</b>"
+
 #~ msgid "<b>Surf the Internet</b>"
 #~ msgstr "<b>漫遊瀏覽網際網路</b>"
+
 #~ msgid "\t* <b>Transfer</b> files with KBear."
 #~ msgstr "\t* 以 KBear <b>傳輸</b>檔案。"
+
 #~ msgid "<b>Development Environments</b>"
 #~ msgstr "<b>開發環境</b>"
+
 #~ msgid "<b>Development Editors</b>"
 #~ msgstr "<b>程式開發編輯器</b>"
+
 #~ msgid "<b>Development Languages</b>"
 #~ msgstr "<b>程式開發語言</b>"
+
 #~ msgid "\t\t* <b>C++</b>"
 #~ msgstr "\t\t* <b>C++</b>"
+
 #~ msgid "\t\t* <b>Java™</b>"
 #~ msgstr "\t\t* <b>Java™</b>"
+
 #~ msgid "\t* Scripting languages:"
 #~ msgstr "\t* 命令稿語言："
+
 #~ msgid "\t\t* <b>Perl</b>"
 #~ msgstr "\t\t* <b>Perl</b>"
+
 #~ msgid "\t\t* <b>Python</b>"
 #~ msgstr "\t\t* <b>Python</b>"
+
 #~ msgid "<b>Development Tools</b>"
 #~ msgstr "<b>程式開發工具</b>"
+
 #~ msgid "<b>Groupware Server</b>"
 #~ msgstr "<b>群組軟體伺服器</b>"
+
 #~ msgid "<b>Servers</b>"
 #~ msgstr "<b>伺服器</b>"
+
 #~ msgid "\t* <b>Apache</b>: The most widely used web server."
 #~ msgstr "\t* <b>Apache</b>: 最廣泛使用的網路伺服器。"
+
 #~ msgid "<b>Mandriva Linux Control Center</b>"
 #~ msgstr "<b>Mandriva Linux 控制中心</b>"
+
 #~ msgid "<b>Online Store</b>"
 #~ msgstr "<b>線上網路商店</b>"
+
 #~ msgid "<b>Mandriva Club</b>"
 #~ msgstr "<b>Mandriva Club</b>"
+
 #~ msgid "<b>Mandriva Online</b>"
 #~ msgstr "<b>Mandriva Online 線上服務</b>"
+
 #~ msgid "<b>Mandriva Expert</b>"
 #~ msgstr "<b>Mandriva Expert</b>"
+
 #~ msgid "Key"
 #~ msgstr "鍵"
+
 #~ msgid "IP:"
 #~ msgstr "IP："
+
 #~ msgid "Mode:"
 #~ msgstr "模式:"
+
 #~ msgid "Encryption:"
 #~ msgstr "加密："
+
 #~ msgid "Rescan"
 #~ msgstr "重複掃描"
+
 #~ msgid "Status"
 #~ msgstr "狀態"
+
 #~ msgid "Disconnect"
 #~ msgstr "斷線"
+
 #~ msgid ""
 #~ "x coordinate of text box\n"
 #~ "in number of characters"
 #~ msgstr "   字元文字方塊的 X 軸坐標                       "
+
 #~ msgid ""
 #~ "y coordinate of text box\n"
 #~ "in number of characters"
 #~ msgstr ""
 #~ "字元文字方塊的 Y 軸坐標\n"
 #~ "於數字與字元"
+
 #~ msgid "text width"
 #~ msgstr "文字寬度                                      "
+
 #~ msgid "ProgressBar color selection"
 #~ msgstr "進度條色彩選擇"
+
 #~ msgid "Do not print any test page"
 #~ msgstr "不要列印任何測試頁"
+
 #~ msgid "Printer on SMB/Windows 95/98/NT server"
 #~ msgstr "SMB/Windows 95/98/NT 伺服器印表機"
+
 #~ msgid "Found printer on %s..."
 #~ msgstr "在 %s 上找到印表機..."
+
 #~ msgid "dhcpd Config..."
 #~ msgstr "dhcpd 設定..."
+
 #~ msgid ""
 #~ "package 'ImageMagick' is required to be able to complete configuration.\n"
 #~ "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
@@ -25383,58 +25132,79 @@ msgstr "安裝失敗"
 #, fuzzy
 #~ msgid "Active Firewall: intrusion detected"
 #~ msgstr "防火牆設定已經偵測到了!"
+
 #~ msgid "Do you want to blacklist the attacker?"
 #~ msgstr "您要將攻擊者列入黑名單嗎？"
+
 #~ msgid "Grub"
 #~ msgstr "Grub"
+
 #~ msgid "Local Network adress"
 #~ msgstr "內部網路IP位址"
+
 #~ msgid "Configuring scripts, installing software, starting servers..."
 #~ msgstr "設定 script, 安裝軟體, 啟動相關的 servers 服務"
+
 #~ msgid "drakfloppy"
 #~ msgstr "drakfloppy"
+
 #~ msgid "Boot disk creation"
 #~ msgstr "製作開機片"
+
 #~ msgid "General"
 #~ msgstr "一般"
+
 #~ msgid "Kernel version"
 #~ msgstr "核心版本"
+
 #~ msgid "Preferences"
 #~ msgstr "偏好設定"
+
 #~ msgid "Advanced preferences"
 #~ msgstr "進階選項"
+
 #~ msgid "Size"
 #~ msgstr "大小"
 
 #, fuzzy
 #~ msgid "Mkinitrd optional arguments"
 #~ msgstr "mkinitrd 選項"
+
 #~ msgid "force"
 #~ msgstr "強迫"
+
 #~ msgid "omit raid modules"
 #~ msgstr "省略 raid 模組"
+
 #~ msgid "if needed"
 #~ msgstr "若需要的話"
+
 #~ msgid "omit scsi modules"
 #~ msgstr "省略 scsi 模組"
+
 #~ msgid "Add a module"
 #~ msgstr "新增模組"
+
 #~ msgid "Remove a module"
 #~ msgstr "移除一模組"
+
 #~ msgid "Be sure a media is present for the device %s"
 #~ msgstr "請確定裝置 %s 內已放入磁碟片"
+
 #~ msgid ""
 #~ "There is no medium or it is write-protected for device %s.\n"
 #~ "Please insert one."
 #~ msgstr ""
 #~ "在裝置 %s 內找不到磁碟片或它具有防寫保護。\n"
 #~ "請放入一張磁碟片。"
+
 #~ msgid "Unable to fork: %s"
 #~ msgstr "無法建立另一行程：%s"
 
 #, fuzzy
 #~ msgid "Floppy creation completed"
 #~ msgstr "連線速度"
+
 #~ msgid "The creation of the boot floppy has been successfully completed \n"
 #~ msgstr "開機片已經成功的建立了\n"
 
@@ -25447,8 +25217,10 @@ msgstr "安裝失敗"
 #~ "無法正常關閉 mkbootdisk：\n"
 #~ " %s\n"
 #~ " %s"
+
 #~ msgid "You can not use a LVM Logical Volume for mount point %s"
 #~ msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點"
+
 #~ msgid ""
 #~ "You've selected a LVM Logical Volume as root (/).\n"
 #~ "The bootloader is not able to handle this without a /boot partition.\n"
@@ -25457,18 +25229,25 @@ msgstr "安裝失敗"
 #~ "你已經選擇了一塊 LVM Logical Volume 當作為根分割區 (/) 的掛載點。\n"
 #~ "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
 #~ "請確定會增加一個 /boot 分割區"
+
 #~ msgid "use PPPoE"
 #~ msgstr "使用 PPPoE"
+
 #~ msgid "use PPTP"
 #~ msgstr "使用 PPTP"
+
 #~ msgid "use DHCP"
 #~ msgstr "使用 DHCP"
+
 #~ msgid "Alcatel Speedtouch USB"
 #~ msgstr "Alcatel Speedtouch USB"
+
 #~ msgid " - detected"
 #~ msgstr " - 已偵測到"
+
 #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 #~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 等等管理程式"
+
 #~ msgid ""
 #~ "Warning, another Internet connection has been detected, maybe using your "
 #~ "network"
@@ -25500,8 +25279,10 @@ msgstr "安裝失敗"
 #~ "讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
 #~ "連上 Internet。請注意: 您需要另外一張網路卡以便\n"
 #~ "於提供區域網路電腦連線存取分享使用。"
+
 #~ msgid "No network adapter on your system!"
 #~ msgstr "您系統並沒有網路卡存在"
+
 #~ msgid "Choose the network interface"
 #~ msgstr "選取網路介面"
 
@@ -25513,6 +25294,7 @@ msgstr "安裝失敗"
 #, fuzzy
 #~ msgid "Interface %s (on network %s)"
 #~ msgstr "介面 %s (使用 %s 模組)"
+
 #~ msgid "The DHCP start ip"
 #~ msgstr "DHCP 開始 ip"
 
@@ -25527,22 +25309,31 @@ msgstr "安裝失敗"
 #, fuzzy
 #~ msgid "Location of auto_install.cfg file"
 #~ msgstr "正在製作自動安裝軟片"
+
 #~ msgid "Do it later"
 #~ msgstr "稍後再執行"
+
 #~ msgid "MdkKDM (Mandriva Linux Display Manager)"
 #~ msgstr "MdkKDM (Mandriva Linux 登入管理員)"
+
 #~ msgid "Internet Connection Sharing currently disabled"
 #~ msgstr "Internet 連線共享目前關閉了。"
+
 #~ msgid "Enabling servers..."
 #~ msgstr "啟用伺服器中..."
+
 #~ msgid "Internet Connection Sharing currently enabled"
 #~ msgstr "Internet 連線分享目前處於可用狀態"
+
 #~ msgid "Interface %s (using module %s)"
 #~ msgstr "介面 %s (使用 %s 模組)"
+
 #~ msgid "Interface %s"
 #~ msgstr "介面 %s"
+
 #~ msgid "Network interface already configured"
 #~ msgstr "網路介面已經設定完成"
+
 #~ msgid ""
 #~ "Warning, the network adapter (%s) is already configured.\n"
 #~ "\n"
@@ -25555,10 +25346,13 @@ msgstr "安裝失敗"
 #~ "您確定要自動重新設定過？\n"
 #~ "\n"
 #~ "如果您有特殊需求, 可以選擇手動方式設定。"
+
 #~ msgid "Show current interface configuration"
 #~ msgstr "顯示目前網路介面組態設定"
+
 #~ msgid "Current interface configuration"
 #~ msgstr "目前介面組態設定"
+
 #~ msgid ""
 #~ "Current configuration of `%s':\n"
 #~ "\n"
@@ -25573,6 +25367,7 @@ msgstr "安裝失敗"
 #~ "IP 位址： %s\n"
 #~ "IP 屬性：%s\n"
 #~ "驅動程式： %s"
+
 #~ msgid ""
 #~ "I can keep your current configuration and assume you already set up a "
 #~ "DHCP server; in that case please verify I correctly read the Network that "
@@ -25593,12 +25388,16 @@ msgstr "安裝失敗"
 #~ "沒問題的話, 安裝程式將會重新設定您的網路介面, 設定由 DHCP 主機\n"
 #~ "取得IP資訊。\n"
 #~ "\n"
+
 #~ msgid "(This) DHCP Server IP"
 #~ msgstr "該 DHCP 主機 IP"
+
 #~ msgid "Re-configure interface and DHCP server"
 #~ msgstr "重新設定該網路介面與 DHCP 伺服器"
+
 #~ msgid "The Local Network did not finish with `.0', bailing out."
 #~ msgstr "該區域網路並不是以 .0 結尾, 放棄..."
+
 #~ msgid ""
 #~ "WARNING: this device has been previously configured to connect to the "
 #~ "Internet.\n"
@@ -25616,8 +25415,10 @@ msgstr "安裝失敗"
 #, fuzzy
 #~ msgid "tape"
 #~ msgstr "磁帶"
+
 #~ msgid "WebDAV remote site already in sync!"
 #~ msgstr "遠端的 WebDAV 站台已經在進行同步了！"
+
 #~ msgid "WebDAV transfer failed!"
 #~ msgstr "WebDAV 傳輸失敗！"
 
@@ -25626,34 +25427,49 @@ msgstr "安裝失敗"
 #~ "Maximum size\n"
 #~ " allowed for Drakbackup (MB)"
 #~ msgstr "請輸入備份允許最大的大小"
+
 #~ msgid "\t-Network by webdav.\n"
 #~ msgstr "\t-網路 (透過 webdav)\n"
+
 #~ msgid "first step creation"
 #~ msgstr "第一部建立"
+
 #~ msgid "choose image file"
 #~ msgstr "選擇映像檔案        "
+
 #~ msgid "Configure bootsplash picture"
 #~ msgstr "無法建立開機載入畫面御覽"
+
 #~ msgid "the color of the progress bar"
 #~ msgstr "   進度Bar的色彩                                 "
+
 #~ msgid "Preview"
 #~ msgstr "御覽"
+
 #~ msgid "Choose color"
 #~ msgstr "選取色彩"
+
 #~ msgid "Make kernel message quiet by default"
 #~ msgstr "設定開機時不顯示核心訊息資訊"
+
 #~ msgid "Notice"
 #~ msgstr "注意"
+
 #~ msgid "This theme does not yet have a bootsplash in %s!"
 #~ msgstr "%s 內尚未有任何開機載入畫面"
+
 #~ msgid "You must choose an image file first!"
 #~ msgstr "您需要先選擇映像檔案！"
+
 #~ msgid "Generating preview..."
 #~ msgstr "產生御覽圖示中..."
+
 #~ msgid "%s BootSplash (%s) preview"
 #~ msgstr "%s 開機進度畫面 (%s) 御覽"
+
 #~ msgid "No floppy drive available"
 #~ msgstr "沒有可用的軟碟機"
+
 #~ msgid "Please insert the Update Modules floppy in drive %s"
 #~ msgstr "請在 %s 磁碟機內插入更新模組軟片"
 
@@ -25662,18 +25478,21 @@ msgstr "安裝失敗"
 #~ "_: keyboard\n"
 #~ "Tifinagh (+latin/arabic)"
 #~ msgstr "南斯拉夫 (拉丁)"
+
 #~ msgid "No network card"
 #~ msgstr "無網路卡"
+
 #~ msgid ""
 #~ "The following protocols can be used to configure an ethernet connection. "
 #~ "Please choose the one you want to use"
 #~ msgstr "下列的通訊協定可以用來設定區域網路連線。請選擇您要使用的協定"
+
 #~ msgid "Use already installed driver (%s)"
 #~ msgstr "使用已經安裝的驅動程式 (%s)"
+
 #~ msgid "Use Wi-Fi Protected Access (WPA)"
 #~ msgstr "使用 Wi-Fi Protected Access (WPA)"
 
 #, fuzzy
 #~ msgid "You've not selected any font"
 #~ msgstr "找不到任何字型。\n"
-