sync translations with code

1 files changed, 248 insertions, 256 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 669651c36..75cb0fbf3 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
-"POT-Creation-Date: 2016-01-02 14:54+0100\n"
+"POT-Creation-Date: 2016-02-09 00:37+0100\n"
 "PO-Revision-Date: 2015-05-26 19:01+0000\n"
 "Last-Translator: Yuri Chornoivan <yurchor@ukr.net>\n"
 "Language-Team: Chinese (Taiwan) (http://www.transifex.com/projects/p/mageia/"
@@ -17,11 +17,11 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
-#: any.pm:262 any.pm:970 diskdrake/interactive.pm:642
-#: diskdrake/interactive.pm:866 diskdrake/interactive.pm:928
-#: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1278
-#: diskdrake/interactive.pm:1336 do_pkgs.pm:342 do_pkgs.pm:387
-#: harddrake/sound.pm:77 interactive.pm:712 pkgs.pm:293
+#: any.pm:262 any.pm:970 diskdrake/interactive.pm:646
+#: diskdrake/interactive.pm:870 diskdrake/interactive.pm:932
+#: diskdrake/interactive.pm:1050 diskdrake/interactive.pm:1282
+#: diskdrake/interactive.pm:1340 do_pkgs.pm:342 do_pkgs.pm:387
+#: interactive.pm:712 pkgs.pm:293
 #, c-format
 msgid "Please wait"
 msgstr "請稍候"
@@ -173,7 +173,7 @@ msgstr "密碼"
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:427 authentication.pm:260 diskdrake/interactive.pm:1502
+#: any.pm:427 authentication.pm:260 diskdrake/interactive.pm:1509
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
@@ -1000,51 +1000,51 @@ msgstr ""
 "或是稍候使用預設作業系統開機。\n"
 "\n"
 
-#: bootloader.pm:1277
+#: bootloader.pm:1278
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO 文字介面選單"
 
-#: bootloader.pm:1278
+#: bootloader.pm:1279
 #, c-format
 msgid "GRUB2 with graphical menu"
 msgstr "GRUB2 圖形介面選單"
 
-#: bootloader.pm:1279
+#: bootloader.pm:1280
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB 圖形介面選單"
 
-#: bootloader.pm:1280
+#: bootloader.pm:1281
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB 文字介面選單"
 
-#: bootloader.pm:1335
+#: bootloader.pm:1336
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 沒有足夠的空間"
 
-#: bootloader.pm:2122
+#: bootloader.pm:2123
 #, c-format
 msgid "You cannot install the bootloader on a %s partition\n"
 msgstr "您不能將開機載入器裝在分割區 %s\n"
 
-#: bootloader.pm:2297
+#: bootloader.pm:2298
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
-#: bootloader.pm:2310
+#: bootloader.pm:2311
 #, c-format
 msgid ""
 "The bootloader cannot be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "開機載入器無法正確安裝。您必須開機到救援模式並選擇 %s。"
 
-#: bootloader.pm:2311
+#: bootloader.pm:2312
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安裝開機載入程式"
@@ -1128,15 +1128,15 @@ msgid "Server"
 msgstr "伺服器"
 
 #: diskdrake/dav.pm:67 diskdrake/interactive.pm:408
-#: diskdrake/interactive.pm:719 diskdrake/interactive.pm:737
-#: diskdrake/interactive.pm:741 diskdrake/removable.pm:23
+#: diskdrake/interactive.pm:723 diskdrake/interactive.pm:741
+#: diskdrake/interactive.pm:745 diskdrake/removable.pm:23
 #: diskdrake/smbnfs_gtk.pm:79
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
 
 #: diskdrake/dav.pm:68 diskdrake/interactive.pm:410
-#: diskdrake/interactive.pm:1173 diskdrake/removable.pm:24
+#: diskdrake/interactive.pm:1177 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1153,14 +1153,14 @@ msgstr "移除"
 msgid "Done"
 msgstr "完成"
 
-#: diskdrake/dav.pm:79 diskdrake/hd_gtk.pm:146 diskdrake/hd_gtk.pm:320
+#: diskdrake/dav.pm:79 diskdrake/hd_gtk.pm:146 diskdrake/hd_gtk.pm:321
 #: diskdrake/interactive.pm:245 diskdrake/interactive.pm:258
-#: diskdrake/interactive.pm:456 diskdrake/interactive.pm:527
-#: diskdrake/interactive.pm:545 diskdrake/interactive.pm:550
-#: diskdrake/interactive.pm:709 diskdrake/interactive.pm:1012
-#: diskdrake/interactive.pm:1064 diskdrake/interactive.pm:1221
-#: diskdrake/interactive.pm:1234 diskdrake/interactive.pm:1237
-#: diskdrake/interactive.pm:1502 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49
+#: diskdrake/interactive.pm:456 diskdrake/interactive.pm:531
+#: diskdrake/interactive.pm:549 diskdrake/interactive.pm:554
+#: diskdrake/interactive.pm:713 diskdrake/interactive.pm:1016
+#: diskdrake/interactive.pm:1068 diskdrake/interactive.pm:1225
+#: diskdrake/interactive.pm:1238 diskdrake/interactive.pm:1241
+#: diskdrake/interactive.pm:1509 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49
 #: do_pkgs.pm:54 do_pkgs.pm:79 do_pkgs.pm:103 do_pkgs.pm:108 do_pkgs.pm:142
 #: fsedit.pm:256 interactive/http.pm:117 interactive/http.pm:118
 #: modules/interactive.pm:19 scanner.pm:94 scanner.pm:105 scanner.pm:112
@@ -1179,12 +1179,12 @@ msgstr "請輸入 WevDAV 主機 URL"
 msgid "The URL must begin with http:// or https://"
 msgstr "URL 格式必須為 http:// 或是 https://"
 
-#: diskdrake/dav.pm:107 diskdrake/hd_gtk.pm:455 diskdrake/interactive.pm:304
-#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:597
-#: diskdrake/interactive.pm:812 diskdrake/interactive.pm:877
-#: diskdrake/interactive.pm:1044 diskdrake/interactive.pm:1086
-#: diskdrake/interactive.pm:1087 diskdrake/interactive.pm:1321
-#: diskdrake/interactive.pm:1359 diskdrake/interactive.pm:1501 do_pkgs.pm:45
+#: diskdrake/dav.pm:107 diskdrake/hd_gtk.pm:456 diskdrake/interactive.pm:304
+#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:601
+#: diskdrake/interactive.pm:816 diskdrake/interactive.pm:881
+#: diskdrake/interactive.pm:1048 diskdrake/interactive.pm:1090
+#: diskdrake/interactive.pm:1091 diskdrake/interactive.pm:1325
+#: diskdrake/interactive.pm:1363 diskdrake/interactive.pm:1508 do_pkgs.pm:45
 #: do_pkgs.pm:74 do_pkgs.pm:100 do_pkgs.pm:137
 #, c-format
 msgid "Warning"
@@ -1201,12 +1201,12 @@ msgid "Server: "
 msgstr "伺服器："
 
 #: diskdrake/dav.pm:126 diskdrake/interactive.pm:501
-#: diskdrake/interactive.pm:1383 diskdrake/interactive.pm:1462
+#: diskdrake/interactive.pm:1387 diskdrake/interactive.pm:1469
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:127 diskdrake/interactive.pm:1469
+#: diskdrake/dav.pm:127 diskdrake/interactive.pm:1476
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
@@ -1226,8 +1226,8 @@ msgstr "分割磁區"
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr "點選一個分割區，選擇檔案系統類型然後選擇一個動作"
 
-#: diskdrake/hd_gtk.pm:125 diskdrake/interactive.pm:1194
-#: diskdrake/interactive.pm:1204 diskdrake/interactive.pm:1259
+#: diskdrake/hd_gtk.pm:125 diskdrake/interactive.pm:1198
+#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1263
 #, c-format
 msgid "Read carefully"
 msgstr "仔細閱讀！"
@@ -1275,69 +1275,69 @@ msgstr "請點選一個分割區"
 msgid "Details"
 msgstr "詳細資訊"
 
-#: diskdrake/hd_gtk.pm:320
+#: diskdrake/hd_gtk.pm:321
 #, c-format
 msgid "No hard disk drives found"
 msgstr "找不到硬碟"
 
-#: diskdrake/hd_gtk.pm:359
+#: diskdrake/hd_gtk.pm:360
 #, c-format
 msgid "Unknown"
 msgstr "未知的"
 
-#: diskdrake/hd_gtk.pm:426
+#: diskdrake/hd_gtk.pm:427
 #, c-format
 msgid "Ext4"
 msgstr "Ext4"
 
-#: diskdrake/hd_gtk.pm:426 fs/partitioning_wizard.pm:425
+#: diskdrake/hd_gtk.pm:427 fs/partitioning_wizard.pm:425
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:426 fs/partitioning_wizard.pm:425
+#: diskdrake/hd_gtk.pm:427 fs/partitioning_wizard.pm:425
 #, c-format
 msgid "Swap"
 msgstr "Swap"
 
-#: diskdrake/hd_gtk.pm:426 fs/partitioning_wizard.pm:425
+#: diskdrake/hd_gtk.pm:427 fs/partitioning_wizard.pm:425
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:427 fs/partitioning_wizard.pm:426 services.pm:195
+#: diskdrake/hd_gtk.pm:428 fs/partitioning_wizard.pm:426 services.pm:195
 #, c-format
 msgid "Other"
 msgstr "其他"
 
-#: diskdrake/hd_gtk.pm:427 diskdrake/interactive.pm:1389
+#: diskdrake/hd_gtk.pm:428 diskdrake/interactive.pm:1393
 #: fs/partitioning_wizard.pm:426
 #, c-format
 msgid "Empty"
 msgstr "空白"
 
-#: diskdrake/hd_gtk.pm:434
+#: diskdrake/hd_gtk.pm:435
 #, c-format
 msgid "Filesystem types:"
 msgstr "檔案系統格式："
 
-#: diskdrake/hd_gtk.pm:455
+#: diskdrake/hd_gtk.pm:456
 #, c-format
 msgid "This partition is already empty"
 msgstr "這個分割區已經是空白的了"
 
-#: diskdrake/hd_gtk.pm:464
+#: diskdrake/hd_gtk.pm:465
 #, c-format
 msgid "Use ``Unmount'' first"
 msgstr "要先 ``Unmount''"
 
-#: diskdrake/hd_gtk.pm:464
+#: diskdrake/hd_gtk.pm:465
 #, c-format
 msgid "Use ``%s'' instead (in expert mode)"
 msgstr "用 ``%s'' 代替 (在專家模式)"
 
-#: diskdrake/hd_gtk.pm:464 diskdrake/interactive.pm:409
-#: diskdrake/interactive.pm:636 diskdrake/removable.pm:25
+#: diskdrake/hd_gtk.pm:465 diskdrake/interactive.pm:409
+#: diskdrake/interactive.pm:640 diskdrake/removable.pm:25
 #: diskdrake/removable.pm:48
 #, c-format
 msgid "Type"
@@ -1360,7 +1360,7 @@ msgid "More"
 msgstr "更多"
 
 #: diskdrake/interactive.pm:279 diskdrake/interactive.pm:292
-#: diskdrake/interactive.pm:1305 mygtk2.pm:1228 mygtk3.pm:1282
+#: diskdrake/interactive.pm:1309 mygtk2.pm:1228 mygtk3.pm:1282
 #, c-format
 msgid "Confirmation"
 msgstr "確認"
@@ -1458,7 +1458,7 @@ msgstr "詳細資訊"
 msgid "View"
 msgstr "檢視"
 
-#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:825
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:829
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
@@ -1468,12 +1468,12 @@ msgstr "重新變更大小"
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:975
+#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:979
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:994
+#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:998
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
@@ -1533,52 +1533,52 @@ msgstr "建立新的分割區"
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:497 diskdrake/interactive.pm:1079
+#: diskdrake/interactive.pm:497 diskdrake/interactive.pm:1083
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:499 diskdrake/interactive.pm:1080
+#: diskdrake/interactive.pm:499 diskdrake/interactive.pm:1084
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
 
-#: diskdrake/interactive.pm:505
+#: diskdrake/interactive.pm:509
 #, c-format
 msgid "Preference: "
 msgstr "偏好設定："
 
-#: diskdrake/interactive.pm:508
+#: diskdrake/interactive.pm:512
 #, c-format
 msgid "Logical volume name "
 msgstr "邏輯磁區名稱"
 
-#: diskdrake/interactive.pm:510
+#: diskdrake/interactive.pm:514
 #, c-format
 msgid "Encrypt partition"
 msgstr "加密分割區"
 
-#: diskdrake/interactive.pm:511
+#: diskdrake/interactive.pm:515
 #, c-format
 msgid "Encryption key "
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:512 diskdrake/interactive.pm:1506
+#: diskdrake/interactive.pm:516 diskdrake/interactive.pm:1513
 #, c-format
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:524 diskdrake/interactive.pm:1502
+#: diskdrake/interactive.pm:528 diskdrake/interactive.pm:1509
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:525
+#: diskdrake/interactive.pm:529
 #, c-format
 msgid "Missing encryption key"
 msgstr "遺失加密金鑰"
 
-#: diskdrake/interactive.pm:545
+#: diskdrake/interactive.pm:549
 #, c-format
 msgid ""
 "You cannot create a new partition\n"
@@ -1589,68 +1589,68 @@ msgstr ""
 "（因為已經達到主要分割區的上限數）\n"
 "請先移除一個主要分割區，並建立延伸分割區。"
 
-#: diskdrake/interactive.pm:597
+#: diskdrake/interactive.pm:601
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:617
+#: diskdrake/interactive.pm:621
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:633
+#: diskdrake/interactive.pm:637
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:635 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:639 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:642
+#: diskdrake/interactive.pm:646
 #, c-format
 msgid "Switching from %s to %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: diskdrake/interactive.pm:677
+#: diskdrake/interactive.pm:681
 #, c-format
 msgid "Set volume label"
 msgstr "設定磁區標籤 "
 
-#: diskdrake/interactive.pm:679
+#: diskdrake/interactive.pm:683
 #, c-format
 msgid "Beware, this will be written to disk as soon as you validate!"
 msgstr "注意，在您確定變更之後將會被寫入磁碟！"
 
-#: diskdrake/interactive.pm:680
+#: diskdrake/interactive.pm:684
 #, c-format
 msgid "Beware, this will be written to disk only after formatting!"
 msgstr "注意，這只會在格式化之後才寫入磁碟!"
 
-#: diskdrake/interactive.pm:682
+#: diskdrake/interactive.pm:686
 #, c-format
 msgid "Which volume label?"
 msgstr "哪一個磁區標籤？"
 
-#: diskdrake/interactive.pm:683
+#: diskdrake/interactive.pm:687
 #, c-format
 msgid "Label:"
 msgstr "標籤："
 
-#: diskdrake/interactive.pm:704
+#: diskdrake/interactive.pm:708
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:705
+#: diskdrake/interactive.pm:709
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:710
+#: diskdrake/interactive.pm:714
 #, c-format
 msgid ""
 "Cannot unset mount point as this partition is used for loop back.\n"
@@ -1659,58 +1659,58 @@ msgstr ""
 "無法取消設定此分割區的掛載點，因為此分割區是用於回送（loopback）。請先移除回"
 "送。"
 
-#: diskdrake/interactive.pm:740
+#: diskdrake/interactive.pm:744
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:770 diskdrake/interactive.pm:866
+#: diskdrake/interactive.pm:774 diskdrake/interactive.pm:870
 #: fs/partitioning_wizard.pm:143 fs/partitioning_wizard.pm:225
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:770
+#: diskdrake/interactive.pm:774
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:812
+#: diskdrake/interactive.pm:816
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:817
+#: diskdrake/interactive.pm:821
 #, c-format
 msgid "All data on this partition should be backed up"
 msgstr "所有此分割區的資料都應該先備份"
 
-#: diskdrake/interactive.pm:819
+#: diskdrake/interactive.pm:823
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:826
+#: diskdrake/interactive.pm:830
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:827
+#: diskdrake/interactive.pm:831
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:828
+#: diskdrake/interactive.pm:832
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小容量：%s MB"
 
-#: diskdrake/interactive.pm:829
+#: diskdrake/interactive.pm:833
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大容量：%s MB"
 
-#: diskdrake/interactive.pm:877 fs/partitioning_wizard.pm:233
+#: diskdrake/interactive.pm:881 fs/partitioning_wizard.pm:233
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s),\n"
@@ -1719,57 +1719,57 @@ msgstr ""
 "為確保重新調整分割區大小後的資料正確性，\n"
 " 您下次從 Microsoft Windows® 開機時會執行檔案系統檢查。 "
 
-#: diskdrake/interactive.pm:943 diskdrake/interactive.pm:1497
+#: diskdrake/interactive.pm:947 diskdrake/interactive.pm:1504
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:944
+#: diskdrake/interactive.pm:948
 #, c-format
 msgid "Enter your filesystem encryption key"
 msgstr "請輸入您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:945 diskdrake/interactive.pm:1505
+#: diskdrake/interactive.pm:949 diskdrake/interactive.pm:1512
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:952
+#: diskdrake/interactive.pm:956
 #, c-format
 msgid "Invalid key"
 msgstr "無效的金鑰"
 
-#: diskdrake/interactive.pm:975
+#: diskdrake/interactive.pm:979
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:977 diskdrake/interactive.pm:996
+#: diskdrake/interactive.pm:981 diskdrake/interactive.pm:1000
 #, c-format
 msgid "new"
 msgstr "新增"
 
-#: diskdrake/interactive.pm:994
+#: diskdrake/interactive.pm:998
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:1006 diskdrake/interactive.pm:1015
+#: diskdrake/interactive.pm:1010 diskdrake/interactive.pm:1019
 #, c-format
 msgid "LVM name"
 msgstr "LVM 名稱"
 
-#: diskdrake/interactive.pm:1007
+#: diskdrake/interactive.pm:1011
 #, c-format
 msgid "Enter a name for the new LVM volume group"
 msgstr "為新的 LVM 磁區群組輸入一個名稱"
 
-#: diskdrake/interactive.pm:1012
+#: diskdrake/interactive.pm:1016
 #, c-format
 msgid "\"%s\" already exists"
 msgstr "\"%s\" 已經存在了"
 
-#: diskdrake/interactive.pm:1044
+#: diskdrake/interactive.pm:1048
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1778,117 +1778,117 @@ msgstr ""
 "實體磁區 %s 仍然在使用中。\n"
 "您要把位於這個磁區的實體延伸移到另一個磁區嗎？"
 
-#: diskdrake/interactive.pm:1046
+#: diskdrake/interactive.pm:1050
 #, c-format
 msgid "Moving physical extents"
 msgstr "移動實體延伸"
 
-#: diskdrake/interactive.pm:1064
+#: diskdrake/interactive.pm:1068
 #, c-format
 msgid "This partition cannot be used for loopback"
 msgstr "此分割區不能用於回送（loopback）"
 
-#: diskdrake/interactive.pm:1077
+#: diskdrake/interactive.pm:1081
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:1078
+#: diskdrake/interactive.pm:1082
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:1083
+#: diskdrake/interactive.pm:1087
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:1086
+#: diskdrake/interactive.pm:1090
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:1087
+#: diskdrake/interactive.pm:1091
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:1119 diskdrake/interactive.pm:1122
+#: diskdrake/interactive.pm:1123 diskdrake/interactive.pm:1126
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:1129
+#: diskdrake/interactive.pm:1133
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1175
+#: diskdrake/interactive.pm:1179
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1176
+#: diskdrake/interactive.pm:1180
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1177
+#: diskdrake/interactive.pm:1181
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 KiB 計量"
 
-#: diskdrake/interactive.pm:1195
+#: diskdrake/interactive.pm:1199
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1212
+#: diskdrake/interactive.pm:1216
 #, c-format
 msgid "Partitioning Type"
 msgstr "磁區格式"
 
-#: diskdrake/interactive.pm:1212
+#: diskdrake/interactive.pm:1216
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1250
+#: diskdrake/interactive.pm:1254
 #, c-format
 msgid "You'll need to reboot before the modification can take effect"
 msgstr "您需要重新開機，變更才能生效"
 
-#: diskdrake/interactive.pm:1259
+#: diskdrake/interactive.pm:1263
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1278 fs/format.pm:107 fs/format.pm:114
+#: diskdrake/interactive.pm:1282 fs/format.pm:107 fs/format.pm:114
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
 
-#: diskdrake/interactive.pm:1291
+#: diskdrake/interactive.pm:1295
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1305 fs/partitioning.pm:48
+#: diskdrake/interactive.pm:1309 fs/partitioning.pm:48
 #, c-format
 msgid "Check for bad blocks?"
 msgstr "要檢查壞掉的磁區嗎？"
 
-#: diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1324
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1324
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1321
+#: diskdrake/interactive.pm:1325
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1904,122 +1904,127 @@ msgstr ""
 "您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起"
 "來，而目錄中顯示出來的會是掛載上的磁區內容)"
 
-#: diskdrake/interactive.pm:1336
+#: diskdrake/interactive.pm:1340
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1340
+#: diskdrake/interactive.pm:1344
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1344
+#: diskdrake/interactive.pm:1348
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1358
+#: diskdrake/interactive.pm:1362
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分割區 %s 現在被命名為 %s 了"
 
-#: diskdrake/interactive.pm:1359
+#: diskdrake/interactive.pm:1363
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1384 diskdrake/interactive.pm:1446
+#: diskdrake/interactive.pm:1388 diskdrake/interactive.pm:1453
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1385
+#: diskdrake/interactive.pm:1389
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤："
 
-#: diskdrake/interactive.pm:1386
+#: diskdrake/interactive.pm:1390
 #, c-format
 msgid "UUID: "
 msgstr "UUID:"
 
-#: diskdrake/interactive.pm:1387
+#: diskdrake/interactive.pm:1391
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1391 diskdrake/interactive.pm:1465
+#: diskdrake/interactive.pm:1395 diskdrake/interactive.pm:1472
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1393
+#: diskdrake/interactive.pm:1397
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1394
+#: diskdrake/interactive.pm:1399
+#, c-format
+msgid "Size: %s (%s%% of disk)"
+msgstr ""
+
+#: diskdrake/interactive.pm:1401
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1396
+#: diskdrake/interactive.pm:1403
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1398
+#: diskdrake/interactive.pm:1405
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1399
+#: diskdrake/interactive.pm:1406
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "邏輯延伸的數目：%d\n"
 
-#: diskdrake/interactive.pm:1400
+#: diskdrake/interactive.pm:1407
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1401
+#: diskdrake/interactive.pm:1408
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1402
+#: diskdrake/interactive.pm:1409
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1403
+#: diskdrake/interactive.pm:1410
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1405
+#: diskdrake/interactive.pm:1412
 #, c-format
 msgid "Encrypted"
 msgstr "已加密"
 
-#: diskdrake/interactive.pm:1407
+#: diskdrake/interactive.pm:1414
 #, c-format
 msgid " (mapped on %s)"
 msgstr "(映射於 %s)"
 
-#: diskdrake/interactive.pm:1408
+#: diskdrake/interactive.pm:1415
 #, c-format
 msgid " (to map on %s)"
 msgstr "(要映射於 %s)"
 
-#: diskdrake/interactive.pm:1409
+#: diskdrake/interactive.pm:1416
 #, c-format
 msgid " (inactive)"
 msgstr "(未啟動)"
 
-#: diskdrake/interactive.pm:1416
+#: diskdrake/interactive.pm:1423
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2028,7 +2033,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1417
+#: diskdrake/interactive.pm:1424
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2037,27 +2042,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1419
+#: diskdrake/interactive.pm:1426
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:1427
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1421
+#: diskdrake/interactive.pm:1428
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1423
+#: diskdrake/interactive.pm:1430
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1426
+#: diskdrake/interactive.pm:1433
 #, c-format
 msgid ""
 "\n"
@@ -2070,7 +2075,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1429
+#: diskdrake/interactive.pm:1436
 #, c-format
 msgid ""
 "\n"
@@ -2082,62 +2087,62 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1438
+#: diskdrake/interactive.pm:1445
 #, c-format
 msgid "Free space on %s (%s)"
 msgstr "%s 上的可用空間 (%s)"
 
-#: diskdrake/interactive.pm:1447
+#: diskdrake/interactive.pm:1454
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1448
+#: diskdrake/interactive.pm:1455
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1449
+#: diskdrake/interactive.pm:1456
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1450
+#: diskdrake/interactive.pm:1457
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1451
+#: diskdrake/interactive.pm:1458
 #, c-format
 msgid "Medium type: "
 msgstr "媒體型式："
 
-#: diskdrake/interactive.pm:1452
+#: diskdrake/interactive.pm:1459
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1453
+#: diskdrake/interactive.pm:1460
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1454
+#: diskdrake/interactive.pm:1461
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1498
+#: diskdrake/interactive.pm:1505
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1501
+#: diskdrake/interactive.pm:1508
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1508
+#: diskdrake/interactive.pm:1515
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密演算法"
@@ -3048,47 +3053,42 @@ msgstr "未知/其他"
 msgid "cpu # "
 msgstr "CPU 編號"
 
-#: harddrake/sound.pm:77
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "請稍待... 正在套用該設定"
-
-#: harddrake/sound.pm:98
+#: harddrake/sound.pm:80
 #, c-format
 msgid "No known driver"
 msgstr "無已知的驅動程式"
 
-#: harddrake/sound.pm:99
+#: harddrake/sound.pm:81
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)"
 
-#: harddrake/sound.pm:130
+#: harddrake/sound.pm:110
 #, c-format
 msgid "Enable PulseAudio"
 msgstr "啟用 PulseAudio"
 
-#: harddrake/sound.pm:135
+#: harddrake/sound.pm:115
 #, c-format
 msgid "Use Glitch-Free mode"
 msgstr "使用無干擾(Glitch-Free)模式"
 
-#: harddrake/sound.pm:141
+#: harddrake/sound.pm:121
 #, c-format
 msgid "Reset sound mixer to default values"
 msgstr "重設混音器為預設值"
 
-#: harddrake/sound.pm:146
+#: harddrake/sound.pm:125
 #, c-format
 msgid "Troubleshooting"
 msgstr "解決問題"
 
-#: harddrake/sound.pm:153
+#: harddrake/sound.pm:132
 #, c-format
 msgid "No alternative driver"
 msgstr "沒有其他可供選擇的驅動程式"
 
-#: harddrake/sound.pm:154
+#: harddrake/sound.pm:133
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
@@ -3097,70 +3097,23 @@ msgstr ""
 "您的音效卡 (%s) 正在使用 \"%s\" 驅動程式，目前沒有其他可供選擇的 OSS/ALSA 驅"
 "動程式支援它"
 
-#: harddrake/sound.pm:161
+#: harddrake/sound.pm:140
 #, c-format
 msgid "Sound configuration"
 msgstr "音效設定"
 
-#. -PO: here the first %s is either "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:167
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently uses the %s\"%s\" driver (the default driver for your "
-"card is \"%s\")"
-msgstr ""
-"\n"
-"您的卡目前使用 %s\"%s\"　驅動程式（您的卡的預設驅動程式為 \"%s\"）"
-
-#: harddrake/sound.pm:169
+#: harddrake/sound.pm:143
 #, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS API\n"
-"- the new ALSA API that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "Your card uses the \"%s\" driver"
 msgstr ""
-"開放音效系統（Open Sound System，OSS）是第一套音效的 API。它是一套獨立於作業"
-"系統的音效 API，可在大部份的 UNIX(tm) 系統上找到。不過它是一套非常基本的 "
-"API。\n"
-"此外，OSS 的驅動程式大部份都是從頭發展。\n"
-"\n"
-"進階 Linux 音效架構（Advanced Linux Sound Architecture，ALSA）是一套模組化的"
-"音效架構，支援相當多的 ISA，USB 與 PCI 音效卡。\n"
-"\n"
-"它也提供了比 OSS 更高階的 API。\n"
-"\n"
-"要使用 alsa，您可以使用以下其中一項：\n"
-"- 與舊的 OSS 相容的 API\n"
-"- 新的 ALSA API，提供更多進階的功能，但是需要使用 ALSA 函式庫。\n"
 
-#: harddrake/sound.pm:184 harddrake/sound.pm:266
-#, c-format
-msgid "Driver:"
-msgstr "驅動程式："
-
-#: harddrake/sound.pm:206
+#: harddrake/sound.pm:155
 #, c-format
 msgid "Sound troubleshooting"
 msgstr "解決音效問題"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:209
+#: harddrake/sound.pm:158
 #, c-format
 msgid ""
 "Below are some basic tips to help debug audio problems, but for accurate and "
@@ -3265,31 +3218,6 @@ msgstr ""
 "- \"/usr/sbin/fuser -v /dev/snd/pcm* /dev/dsp\" 會告訴您哪個程式正在直接使用"
 "音效卡 (通常這應該只會顯示 PulseAudio)。\n"
 
-#: harddrake/sound.pm:255
-#, c-format
-msgid "Let me pick any driver"
-msgstr "讓我選擇任何驅動程式"
-
-#: harddrake/sound.pm:258
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "正在選擇任意的驅動程式"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:261
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one from the list below.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"若是您真的知道您的音效卡應該使用哪個驅動程式，\n"
-"您可以在下方清單中選取正確的驅動程式。\n"
-"\n"
-"目前您的音效卡 %s 的驅動程式為 %s"
-
 #: harddrake/v4l.pm:12
 #, c-format
 msgid "Auto-detect"
@@ -4694,7 +4622,7 @@ msgstr "實體磁碟區 %s 仍在使用中"
 msgid "Remove the logical volumes first\n"
 msgstr "先移除邏輯 volume\n"
 
-#: lvm.pm:247
+#: lvm.pm:248
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr "開機載入器無法處理位於多個實體磁區的 /boot"
@@ -6790,3 +6718,67 @@ msgstr ""
 #, c-format
 msgid "Installation failed"
 msgstr "安裝失敗"
+
+#~ msgid "Please Wait... Applying the configuration"
+#~ msgstr "請稍待... 正在套用該設定"
+
+#~ msgid ""
+#~ "\n"
+#~ "\n"
+#~ "Your card currently uses the %s\"%s\" driver (the default driver for your "
+#~ "card is \"%s\")"
+#~ msgstr ""
+#~ "\n"
+#~ "您的卡目前使用 %s\"%s\"　驅動程式（您的卡的預設驅動程式為 \"%s\"）"
+
+#~ msgid ""
+#~ "OSS (Open Sound System) was the first sound API. It's an OS independent "
+#~ "sound API (it's available on most UNIX(tm) systems) but it's a very basic "
+#~ "and limited API.\n"
+#~ "What's more, OSS drivers all reinvent the wheel.\n"
+#~ "\n"
+#~ "ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+#~ "which\n"
+#~ "supports quite a large range of ISA, USB and PCI cards.\n"
+#~ "\n"
+#~ "It also provides a much higher API than OSS.\n"
+#~ "\n"
+#~ "To use alsa, one can either use:\n"
+#~ "- the old compatibility OSS API\n"
+#~ "- the new ALSA API that provides many enhanced features but requires "
+#~ "using the ALSA library.\n"
+#~ msgstr ""
+#~ "開放音效系統（Open Sound System，OSS）是第一套音效的 API。它是一套獨立於作"
+#~ "業系統的音效 API，可在大部份的 UNIX(tm) 系統上找到。不過它是一套非常基本"
+#~ "的 API。\n"
+#~ "此外，OSS 的驅動程式大部份都是從頭發展。\n"
+#~ "\n"
+#~ "進階 Linux 音效架構（Advanced Linux Sound Architecture，ALSA）是一套模組化"
+#~ "的音效架構，支援相當多的 ISA，USB 與 PCI 音效卡。\n"
+#~ "\n"
+#~ "它也提供了比 OSS 更高階的 API。\n"
+#~ "\n"
+#~ "要使用 alsa，您可以使用以下其中一項：\n"
+#~ "- 與舊的 OSS 相容的 API\n"
+#~ "- 新的 ALSA API，提供更多進階的功能，但是需要使用 ALSA 函式庫。\n"
+
+#~ msgid "Driver:"
+#~ msgstr "驅動程式："
+
+#~ msgid "Let me pick any driver"
+#~ msgstr "讓我選擇任何驅動程式"
+
+#~ msgid "Choosing an arbitrary driver"
+#~ msgstr "正在選擇任意的驅動程式"
+
+#~ msgid ""
+#~ "If you really think that you know which driver is the right one for your "
+#~ "card\n"
+#~ "you can pick one from the list below.\n"
+#~ "\n"
+#~ "The current driver for your \"%s\" sound card is \"%s\" "
+#~ msgstr ""
+#~ "若是您真的知道您的音效卡應該使用哪個驅動程式，\n"
+#~ "您可以在下方清單中選取正確的驅動程式。\n"
+#~ "\n"
+#~ "目前您的音效卡 %s 的驅動程式為 %s"