usync with code

1 files changed, 232 insertions, 227 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 269961aba..1fbcc8516 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2008-08-18 18:01+0200\n"
+"POT-Creation-Date: 2008-08-29 18:51+0200\n"
 "PO-Revision-Date: 2008-03-12 22:25+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -29,20 +29,20 @@ msgstr ""
 "X-Poedit-Language: Chinese\n"
 "X-Poedit-Country: TAIWAN\n"
 
-#: any.pm:245 diskdrake/interactive.pm:554 diskdrake/interactive.pm:741
-#: diskdrake/interactive.pm:785 diskdrake/interactive.pm:843
-#: diskdrake/interactive.pm:1133 do_pkgs.pm:221 do_pkgs.pm:267
-#: harddrake/sound.pm:285 interactive.pm:580
+#: any.pm:252 any.pm:848 diskdrake/interactive.pm:554
+#: diskdrake/interactive.pm:741 diskdrake/interactive.pm:785
+#: diskdrake/interactive.pm:843 diskdrake/interactive.pm:1133 do_pkgs.pm:221
+#: do_pkgs.pm:267 harddrake/sound.pm:285 interactive.pm:583
 #, c-format
 msgid "Please wait"
 msgstr "請稍候"
 
-#: any.pm:245
+#: any.pm:252
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "開機載入程式安裝中"
 
-#: any.pm:256
+#: any.pm:263
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -58,12 +58,12 @@ msgstr ""
 "\n"
 "要分配一個新的磁區標籤？"
 
-#: any.pm:267
+#: any.pm:274
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "開機程式安裝失敗，發生如下之錯誤："
 
-#: any.pm:273
+#: any.pm:280
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -80,7 +80,7 @@ msgstr ""
 "然後再輸入：shut-down\n"
 "然後您下一次開機時應該就可以看到開機啟動程式的訊息了。"
 
-#: any.pm:313
+#: any.pm:320
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -95,274 +95,274 @@ msgstr ""
 "\n"
 "您目前是用那顆硬碟開機呢？"
 
-#: any.pm:339
+#: any.pm:346
 #, fuzzy, c-format
 msgid "First sector (MBR) of drive %s"
 msgstr "硬碟的第一個扇區 (MBR)"
 
-#: any.pm:341
+#: any.pm:348
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "硬碟的第一個扇區 (MBR)"
 
-#: any.pm:343
+#: any.pm:350
 #, c-format
 msgid "First sector of the root partition"
 msgstr "根分割區的第一扇區"
 
-#: any.pm:345
+#: any.pm:352
 #, c-format
 msgid "On Floppy"
 msgstr "在軟碟機"
 
-#: any.pm:347
+#: any.pm:354
 #, c-format
 msgid "Skip"
 msgstr "略過"
 
-#: any.pm:351
+#: any.pm:358
 #, c-format
 msgid "LILO/grub Installation"
 msgstr "LILO/GRUB 安裝"
 
-#: any.pm:352
+#: any.pm:359
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "您要將開機載入程式安裝在那裡？"
 
-#: any.pm:379
+#: any.pm:386
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:389 any.pm:420 any.pm:421
+#: any.pm:396 any.pm:427 any.pm:428
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入程式主要選項"
 
-#: any.pm:393
+#: any.pm:400
 #, c-format
 msgid "Bootloader"
 msgstr "開機載入器"
 
-#: any.pm:394 any.pm:424
+#: any.pm:401 any.pm:431
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入程式"
 
-#: any.pm:396 any.pm:426
+#: any.pm:403 any.pm:433
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
 
-#: any.pm:398
+#: any.pm:405
 #, c-format
 msgid "Main options"
 msgstr "主要選項"
 
-#: any.pm:399
+#: any.pm:406
 #, c-format
 msgid "Delay before booting default image"
 msgstr "以預設的核心影像開機之前等待的時間"
 
-#: any.pm:400
+#: any.pm:407
 #, c-format
 msgid "Enable ACPI"
 msgstr "啟用 ACPI"
 
-#: any.pm:401
+#: any.pm:408
 #, c-format
 msgid "Enable APIC"
 msgstr "啟用 APIC"
 
-#: any.pm:402
+#: any.pm:409
 #, c-format
 msgid "Enable Local APIC"
 msgstr "啟用本地 APIC"
 
-#: any.pm:404 any.pm:790 any.pm:799 authentication.pm:239
+#: any.pm:411 any.pm:797 any.pm:812 authentication.pm:239
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "密碼"
 
-#: any.pm:406 authentication.pm:250
+#: any.pm:413 authentication.pm:250
 #, c-format
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:406 authentication.pm:250 diskdrake/interactive.pm:1300
+#: any.pm:413 authentication.pm:250 diskdrake/interactive.pm:1300
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
 
-#: any.pm:407
+#: any.pm:414
 #, c-format
 msgid "You can not use a password with %s"
 msgstr "您不能使用 %s 作為密碼"
 
-#: any.pm:410 any.pm:792 any.pm:801 authentication.pm:240
+#: any.pm:417 any.pm:799 any.pm:814 authentication.pm:240
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
 
-#: any.pm:411
+#: any.pm:418
 #, c-format
 msgid "Restrict command line options"
 msgstr "限制命令列選項"
 
-#: any.pm:411
+#: any.pm:418
 #, c-format
 msgid "restrict"
 msgstr "限制"
 
-#: any.pm:412
+#: any.pm:419
 #, c-format
 msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
 
-#: any.pm:414
+#: any.pm:421
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次開機時清理 /tmp"
 
-#: any.pm:415
+#: any.pm:422
 #, c-format
 msgid "Precise RAM size if needed (found %d MB)"
 msgstr "若有需要的話，請輸入正確的記憶體大小 (找到 %d MB)"
 
-#: any.pm:416
+#: any.pm:423
 #, c-format
 msgid "Give the ram size in MB"
 msgstr "輸入記憶體大小 (以 MB 為單位)"
 
-#: any.pm:425
+#: any.pm:432
 #, c-format
 msgid "Init Message"
 msgstr "啟動訊息"
 
-#: any.pm:427
+#: any.pm:434
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Open Firmware 延遲"
 
-#: any.pm:428
+#: any.pm:435
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心啟動時間逾時"
 
-#: any.pm:429
+#: any.pm:436
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允許光碟開機？"
 
-#: any.pm:430
+#: any.pm:437
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "允許 Open Firmware 開機？"
 
-#: any.pm:431
+#: any.pm:438
 #, c-format
 msgid "Default OS?"
 msgstr "預設的作業系統？"
 
-#: any.pm:498
+#: any.pm:505
 #, c-format
 msgid "Image"
 msgstr "核心影像"
 
-#: any.pm:499 any.pm:512
+#: any.pm:506 any.pm:519
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:500 any.pm:525
+#: any.pm:507 any.pm:532
 #, c-format
 msgid "Append"
 msgstr "附加參數"
 
-#: any.pm:502
+#: any.pm:509
 #, c-format
 msgid "Xen append"
 msgstr "Xen 附加參數"
 
-#: any.pm:505
+#: any.pm:512
 #, c-format
 msgid "Video mode"
 msgstr "顯示模式"
 
-#: any.pm:507
+#: any.pm:514
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:508
+#: any.pm:515
 #, c-format
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:517 any.pm:522 any.pm:524 diskdrake/interactive.pm:376
+#: any.pm:524 any.pm:529 any.pm:531 diskdrake/interactive.pm:376
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:519 any.pm:527 harddrake/v4l.pm:438
+#: any.pm:526 any.pm:534 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "預設"
 
-#: any.pm:526
+#: any.pm:533
 #, c-format
 msgid "NoVideo"
 msgstr "沒有 Video 參數"
 
-#: any.pm:537
+#: any.pm:544
 #, c-format
 msgid "Empty label not allowed"
 msgstr "不允許空白標籤"
 
-#: any.pm:538
+#: any.pm:545
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您需要指定一個核心影像"
 
-#: any.pm:538
+#: any.pm:545
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您需要指定一個 root 分割區"
 
-#: any.pm:539
+#: any.pm:546
 #, c-format
 msgid "This label is already used"
 msgstr "這個標籤已經被用過了"
 
-#: any.pm:557
+#: any.pm:564
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "您要新增哪一類的項目？"
 
-#: any.pm:558
+#: any.pm:565
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:558
+#: any.pm:565
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其他作業系統 (SunOS...)"
 
-#: any.pm:559
+#: any.pm:566
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其他作業系統 (MacOS...)"
 
-#: any.pm:559
+#: any.pm:566
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其他作業系統 (Windows...)"
 
-#: any.pm:587
+#: any.pm:594
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -371,183 +371,188 @@ msgstr ""
 "目前有這些選項在您的開機選單中。\n"
 "您可以建立更多的選項或修改既有的選項。"
 
-#: any.pm:751
+#: any.pm:758
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:752
+#: any.pm:759
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 RPM 套件工具程式"
 
-#: any.pm:753
+#: any.pm:760
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:754
+#: any.pm:761
 #, c-format
 msgid "access to administrative files"
 msgstr "存取系統管理者權限的檔案"
 
-#: any.pm:755
+#: any.pm:762
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:756
+#: any.pm:763
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:762
+#: any.pm:769
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:768
+#: any.pm:775
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:769
+#: any.pm:776
 #, c-format
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
-#: any.pm:770
+#: any.pm:777
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:771
+#: any.pm:778
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:777 any.pm:803
+#: any.pm:784 any.pm:816
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:777 any.pm:804
+#: any.pm:784 any.pm:817
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
 
-#: any.pm:778
+#: any.pm:785
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必須是數字"
 
-#: any.pm:779
+#: any.pm:786
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:783
+#: any.pm:790
 #, c-format
 msgid "User management"
 msgstr "使用者管理"
 
-#: any.pm:789 authentication.pm:226
+#: any.pm:796 authentication.pm:226
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "設定管理者 (root) 密碼"
 
-#: any.pm:794
+#: any.pm:801
 #, c-format
 msgid "Enter a user"
 msgstr "輸入一位使用者"
 
-#: any.pm:795
+#: any.pm:803
+#, c-format
+msgid "Icon"
+msgstr "圖示"
+
+#: any.pm:806
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:798
+#: any.pm:810
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:802
+#: any.pm:815
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:806
+#: any.pm:848
 #, c-format
-msgid "Icon"
-msgstr "圖示"
+msgid "Please wait, adding media..."
+msgstr ""
 
-#: any.pm:844 security/l10n.pm:14
+#: any.pm:866 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:845
+#: any.pm:867
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
 
-#: any.pm:846
+#: any.pm:868
 #, c-format
 msgid "Use this feature"
 msgstr "使用此功能"
 
-#: any.pm:847
+#: any.pm:869
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者："
 
-#: any.pm:848
+#: any.pm:870
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:871 any.pm:920
+#: any.pm:881 any.pm:899 any.pm:957
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: any.pm:878 any.pm:1217 interactive/gtk.pm:774
+#: any.pm:906 any.pm:1250 interactive/gtk.pm:804
 #, c-format
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:914
+#: any.pm:943
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: any.pm:916 diskdrake/dav.pm:26
+#: any.pm:945 diskdrake/dav.pm:26
 #, c-format
 msgid "Quit"
 msgstr "離開"
 
-#: any.pm:925
+#: any.pm:952
 #, fuzzy, c-format
 msgid "Do you accept this license ?"
 msgstr "您還有其他的嗎？"
 
-#: any.pm:926
+#: any.pm:953
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:926
+#: any.pm:953
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: any.pm:947 any.pm:1012
+#: any.pm:980 any.pm:1045
 #, c-format
 msgid "Please choose a language to use"
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:976
+#: any.pm:1009
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -557,77 +562,77 @@ msgstr ""
 "Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
 "它們將可供您完成安裝並重新啟動系統之後使用。"
 
-#: any.pm:979
+#: any.pm:1012
 #, c-format
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:990 any.pm:1021
+#: any.pm:1023 any.pm:1054
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "舊式相容 (非 UTF-8) 編碼"
 
-#: any.pm:992
+#: any.pm:1025
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:1013
+#: any.pm:1046
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:1068
+#: any.pm:1101
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:1069
+#: any.pm:1102
 #, c-format
 msgid "Please choose your country."
 msgstr "請選擇您的國家。"
 
-#: any.pm:1071
+#: any.pm:1104
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:1072
+#: any.pm:1105
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:1072 interactive.pm:481
+#: any.pm:1105 interactive.pm:484 interactive/gtk.pm:426
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:1078
+#: any.pm:1111
 #, c-format
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:1081
+#: any.pm:1114
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:1162
+#: any.pm:1195
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:1162
+#: any.pm:1195
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:1162
+#: any.pm:1195
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: any.pm:1166
+#: any.pm:1199
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -642,32 +647,32 @@ msgstr ""
 "\n"
 "\"自訂\" 允許每一個使用者自行設定。\n"
 
-#: any.pm:1178
+#: any.pm:1211
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
-#: any.pm:1181
+#: any.pm:1214
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
-#: any.pm:1189
+#: any.pm:1222
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
-#: any.pm:1217
+#: any.pm:1250
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1219
+#: any.pm:1252
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -676,52 +681,52 @@ msgstr ""
 "每個使用者的分享都是使用 \"fileshare\" 群組。\n"
 "您可以執行 userdrake 在該群組內加入使用者。"
 
-#: any.pm:1311
+#: any.pm:1344
 #, c-format
 msgid "Please log out and then use Ctrl-Alt-BackSpace"
 msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"
 
-#: any.pm:1315
+#: any.pm:1348
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您必須登出之後重新登入才能讓變動生效"
 
-#: any.pm:1350
+#: any.pm:1383
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: any.pm:1350
+#: any.pm:1383
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何？"
 
-#: any.pm:1373 any.pm:1375
+#: any.pm:1406 any.pm:1408
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、時間與時區設定"
 
-#: any.pm:1376
+#: any.pm:1409
 #, c-format
 msgid "What is the best time?"
 msgstr "最佳的時間是哪一個？"
 
-#: any.pm:1380
+#: any.pm:1413
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬體時鐘設定為 UTC 時間)"
 
-#: any.pm:1381
+#: any.pm:1414
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬體時鐘設定為本地時間)"
 
-#: any.pm:1383
+#: any.pm:1416
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 伺服器"
 
-#: any.pm:1384
+#: any.pm:1417
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自動時間同步 (使用 NTP 服務)"
@@ -815,7 +820,7 @@ msgstr "使用 Kerberos 與 LDAP 來在 Active Directory 伺服器上進行認�
 
 #: authentication.pm:96 authentication.pm:130 authentication.pm:149
 #: authentication.pm:150 authentication.pm:176 authentication.pm:200
-#: authentication.pm:871
+#: authentication.pm:878
 #, c-format
 msgid " "
 msgstr ""
@@ -1008,27 +1013,27 @@ msgstr "沒有密碼"
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr "這個密碼太短了 (至少要有 %d 個字元才行)"
 
-#: authentication.pm:353
+#: authentication.pm:358
 #, c-format
 msgid "Can not use broadcast with no NIS domain"
 msgstr "沒有 NIS 網域無法使用廣播 (broadcast)"
 
-#: authentication.pm:866
+#: authentication.pm:873
 #, c-format
 msgid "Select file"
 msgstr "選擇檔案"
 
-#: authentication.pm:872
+#: authentication.pm:879
 #, fuzzy, c-format
 msgid "Domain Windows for authentication : "
 msgstr "需要 Domain 認證"
 
-#: authentication.pm:874
+#: authentication.pm:881
 #, c-format
 msgid "Domain Admin User Name"
 msgstr "網域管理者名稱"
 
-#: authentication.pm:875
+#: authentication.pm:882
 #, c-format
 msgid "Domain Admin Password"
 msgstr "網域管理者密碼"
@@ -1195,13 +1200,13 @@ msgstr "掛載點"
 msgid "Options"
 msgstr "選項"
 
-#: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:167 diskdrake/removable.pm:26
+#: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:174 diskdrake/removable.pm:26
 #: diskdrake/smbnfs_gtk.pm:82 interactive/http.pm:151
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/hd_gtk.pm:265
+#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:120 diskdrake/hd_gtk.pm:272
 #: diskdrake/interactive.pm:233 diskdrake/interactive.pm:246
 #: diskdrake/interactive.pm:480 diskdrake/interactive.pm:485
 #: diskdrake/interactive.pm:603 diskdrake/interactive.pm:861
@@ -1242,7 +1247,7 @@ msgstr "掛載點："
 msgid "Options: %s"
 msgstr "選項： %s"
 
-#: diskdrake/hd_gtk.pm:53 diskdrake/interactive.pm:284
+#: diskdrake/hd_gtk.pm:54 diskdrake/interactive.pm:284
 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106
 #: fs/partitioning_wizard.pm:51 fs/partitioning_wizard.pm:206
 #: fs/partitioning_wizard.pm:211 fs/partitioning_wizard.pm:250
@@ -1251,49 +1256,39 @@ msgstr "選項： %s"
 msgid "Partitioning"
 msgstr "分割磁區"
 
-#: diskdrake/hd_gtk.pm:66
+#: diskdrake/hd_gtk.pm:68
 #, c-format
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr ""
 
-#: diskdrake/hd_gtk.pm:93 diskdrake/interactive.pm:1010
+#: diskdrake/hd_gtk.pm:102 diskdrake/interactive.pm:1010
 #: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1073
 #, c-format
 msgid "Read carefully!"
 msgstr "仔細閱讀！"
 
-#: diskdrake/hd_gtk.pm:93
+#: diskdrake/hd_gtk.pm:102
 #, c-format
 msgid "Please make a backup of your data first"
 msgstr "請您先備份您的資料"
 
-#: diskdrake/hd_gtk.pm:94 diskdrake/interactive.pm:226
+#: diskdrake/hd_gtk.pm:103 diskdrake/interactive.pm:226
 #, c-format
 msgid "Exit"
 msgstr "離開"
 
-#: diskdrake/hd_gtk.pm:94
+#: diskdrake/hd_gtk.pm:103
 #, c-format
 msgid "Continue"
 msgstr "繼續"
 
-#: diskdrake/hd_gtk.pm:97
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空"
-"間 (2048 扇區就足夠了)"
-
-#: diskdrake/hd_gtk.pm:163 interactive.pm:644 interactive/gtk.pm:752
-#: interactive/gtk.pm:767 interactive/gtk.pm:787 ugtk2.pm:942 ugtk2.pm:943
+#: diskdrake/hd_gtk.pm:170 interactive.pm:649 interactive/gtk.pm:781
+#: interactive/gtk.pm:797 interactive/gtk.pm:815 ugtk2.pm:933 ugtk2.pm:934
 #, c-format
 msgid "Help"
 msgstr "輔助說明"
 
-#: diskdrake/hd_gtk.pm:201
+#: diskdrake/hd_gtk.pm:208
 #, c-format
 msgid ""
 "You have one big Microsoft Windows partition.\n"
@@ -1304,72 +1299,72 @@ msgstr ""
 "建議您先重新改變這個分割區的大小\n"
 "(點選它，然後按 \"重新改變大小\")"
 
-#: diskdrake/hd_gtk.pm:203
+#: diskdrake/hd_gtk.pm:210
 #, c-format
 msgid "Please click on a partition"
 msgstr "請點選一個分割區"
 
-#: diskdrake/hd_gtk.pm:217 diskdrake/smbnfs_gtk.pm:63
+#: diskdrake/hd_gtk.pm:224 diskdrake/smbnfs_gtk.pm:63
 #, c-format
 msgid "Details"
 msgstr "詳細資訊"
 
-#: diskdrake/hd_gtk.pm:265
+#: diskdrake/hd_gtk.pm:272
 #, c-format
 msgid "No hard drives found"
 msgstr "找不到硬碟裝置"
 
-#: diskdrake/hd_gtk.pm:292
+#: diskdrake/hd_gtk.pm:299
 #, c-format
 msgid "Unknown"
 msgstr "未知的"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "Ext3"
 msgstr "Ext3"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "Swap"
 msgstr "Swap"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "SunOS"
 msgstr "SunOS"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "HFS"
 msgstr "HFS"
 
-#: diskdrake/hd_gtk.pm:354
+#: diskdrake/hd_gtk.pm:361
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:355 services.pm:158
+#: diskdrake/hd_gtk.pm:362 services.pm:158
 #, c-format
 msgid "Other"
 msgstr "其他"
 
-#: diskdrake/hd_gtk.pm:355 diskdrake/interactive.pm:1195
+#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:1195
 #, c-format
 msgid "Empty"
 msgstr "空白"
 
-#: diskdrake/hd_gtk.pm:362
+#: diskdrake/hd_gtk.pm:369
 #, c-format
 msgid "Filesystem types:"
 msgstr "檔案系統格式："
 
-#: diskdrake/hd_gtk.pm:383 diskdrake/interactive.pm:289
+#: diskdrake/hd_gtk.pm:390 diskdrake/interactive.pm:289
 #: diskdrake/interactive.pm:361 diskdrake/interactive.pm:510
 #: diskdrake/interactive.pm:694 diskdrake/interactive.pm:752
 #: diskdrake/interactive.pm:841 diskdrake/interactive.pm:883
@@ -1380,22 +1375,22 @@ msgstr "檔案系統格式："
 msgid "Warning"
 msgstr "警告"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:390
 #, c-format
 msgid "This partition is already empty"
 msgstr "這個分割區已經是空白的了"
 
-#: diskdrake/hd_gtk.pm:392
+#: diskdrake/hd_gtk.pm:399
 #, c-format
 msgid "Use ``Unmount'' first"
 msgstr "要先 ``Unmount''"
 
-#: diskdrake/hd_gtk.pm:392
+#: diskdrake/hd_gtk.pm:399
 #, c-format
 msgid "Use ``%s'' instead (in expert mode)"
 msgstr "用 ``%s'' 代替 (在專家模式)"
 
-#: diskdrake/hd_gtk.pm:392 diskdrake/interactive.pm:374
+#: diskdrake/hd_gtk.pm:399 diskdrake/interactive.pm:374
 #: diskdrake/interactive.pm:548 diskdrake/interactive.pm:1026
 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48
 #, c-format
@@ -2107,10 +2102,10 @@ msgstr "加密演算法"
 msgid "Change type"
 msgstr "改變分割區格式"
 
-#: diskdrake/smbnfs_gtk.pm:81 interactive.pm:126 interactive.pm:543
+#: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:546
 #: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:411 ugtk2.pm:513
-#: ugtk2.pm:522 ugtk2.pm:807
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:415 ugtk2.pm:517
+#: ugtk2.pm:526 ugtk2.pm:813
 #, c-format
 msgid "Cancel"
 msgstr "取消"
@@ -2533,8 +2528,8 @@ msgstr ""
 "當您確定之後，請按下%s。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:165 interactive.pm:542 interactive/curses.pm:263
-#: ugtk2.pm:515
+#: fs/partitioning_wizard.pm:165 interactive.pm:545 interactive/curses.pm:263
+#: ugtk2.pm:519
 #, c-format
 msgid "Next"
 msgstr "下一步"
@@ -2613,12 +2608,12 @@ msgstr ""
 msgid "I can not find any room for installing"
 msgstr "找不到任何可用的安裝空間"
 
-#: fs/partitioning_wizard.pm:273
+#: fs/partitioning_wizard.pm:278
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分割精靈找到了下列方案："
 
-#: fs/partitioning_wizard.pm:284
+#: fs/partitioning_wizard.pm:287
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "硬碟分割失敗：%s"
@@ -3250,55 +3245,55 @@ msgstr "介面卡型號："
 msgid "Tuner type:"
 msgstr "調頻類型："
 
-#: interactive.pm:125 interactive.pm:542 interactive/curses.pm:263
+#: interactive.pm:128 interactive.pm:545 interactive/curses.pm:263
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39
-#: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:417 ugtk2.pm:515
-#: ugtk2.pm:807 ugtk2.pm:830
+#: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:421 ugtk2.pm:519
+#: ugtk2.pm:813 ugtk2.pm:836
 #, c-format
 msgid "Ok"
 msgstr "確定"
 
-#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:806 wizards.pm:156
+#: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是的"
 
-#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:806 wizards.pm:156
+#: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: interactive.pm:258
+#: interactive.pm:261
 #, c-format
 msgid "Choose a file"
 msgstr "選擇一個檔案"
 
-#: interactive.pm:383 interactive/gtk.pm:428
+#: interactive.pm:386 interactive/gtk.pm:436
 #, c-format
 msgid "Add"
 msgstr "新增"
 
-#: interactive.pm:383 interactive/gtk.pm:428
+#: interactive.pm:386 interactive/gtk.pm:436
 #, c-format
 msgid "Modify"
 msgstr "修改"
 
-#: interactive.pm:383 interactive/gtk.pm:428
+#: interactive.pm:386 interactive/gtk.pm:436
 #, c-format
 msgid "Remove"
 msgstr "移除"
 
-#: interactive.pm:542 interactive/curses.pm:263 ugtk2.pm:515
+#: interactive.pm:545 interactive/curses.pm:263 ugtk2.pm:519
 #, c-format
 msgid "Finish"
 msgstr "完成"
 
-#: interactive.pm:543 interactive/curses.pm:260 ugtk2.pm:513
+#: interactive.pm:546 interactive/curses.pm:260 ugtk2.pm:517
 #, c-format
 msgid "Previous"
 msgstr "上一步"
 
-#: interactive/gtk.pm:556
+#: interactive/gtk.pm:564
 #, c-format
 msgid "Beware, Caps Lock is enabled"
 msgstr "注意，已開啟字母大寫(Caps Lock)"
@@ -4574,7 +4569,7 @@ msgstr "尚比亞"
 msgid "Zimbabwe"
 msgstr "辛巴威"
 
-#: lang.pm:1201
+#: lang.pm:1208
 #, c-format
 msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
@@ -5724,32 +5719,37 @@ msgstr "安全性"
 msgid "DrakSec Basic Options"
 msgstr "DrakSec 基本參數選項"
 
-#: security/level.pm:56
+#: security/level.pm:58
 #, c-format
 msgid "Please choose the desired security level"
 msgstr "請選擇您希望的安全層級"
 
 #: security/level.pm:60
 #, c-format
-msgid "Security level"
-msgstr "安全層級"
+msgid "%s: %s"
+msgstr ""
 
-#: security/level.pm:62
+#: security/level.pm:63
 #, c-format
 msgid "Use libsafe for servers"
 msgstr "啟用「libsafe」防護功能"
 
-#: security/level.pm:63
+#: security/level.pm:64
 #, c-format
 msgid ""
 "A library which defends against buffer overflow and format string attacks."
 msgstr "能夠偵測防禦緩衝區溢位與格式化字串這類攻擊的程式庫套件。"
 
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
+#: security/level.pm:65
+#, fuzzy, c-format
+msgid "Security Administrator:"
 msgstr "安全性管理者 (login 或是 email)"
 
+#: security/level.pm:66
+#, c-format
+msgid "Login or email:"
+msgstr ""
+
 #: services.pm:19
 #, c-format
 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
@@ -6185,7 +6185,7 @@ msgstr ""
 "抱歉 ! 這個服務項目並沒有\n"
 "額外的相關資訊。"
 
-#: services.pm:221 ugtk2.pm:917
+#: services.pm:221 ugtk2.pm:923
 #, c-format
 msgid "Info"
 msgstr "資訊"
@@ -6440,51 +6440,36 @@ msgstr "俄羅斯聯邦"
 msgid "Yugoslavia"
 msgstr "南斯拉夫"
 
-#: ugtk2.pm:807
+#: ugtk2.pm:813
 #, c-format
 msgid "Is this correct?"
 msgstr "這樣子正確嗎？"
 
-#: ugtk2.pm:867
+#: ugtk2.pm:873
 #, c-format
 msgid "No file chosen"
 msgstr "未選擇檔案"
 
-#: ugtk2.pm:869
+#: ugtk2.pm:875
 #, c-format
 msgid "You have chosen a file, not a directory"
 msgstr "您選擇了檔案而非目錄"
 
-#: ugtk2.pm:871
+#: ugtk2.pm:877
 #, c-format
 msgid "You have chosen a directory, not a file"
 msgstr "您選擇了目錄而非檔案"
 
-#: ugtk2.pm:873
+#: ugtk2.pm:879
 #, c-format
 msgid "No such directory"
 msgstr "無此目錄"
 
-#: ugtk2.pm:873
+#: ugtk2.pm:879
 #, c-format
 msgid "No such file"
 msgstr "無此檔案"
 
-#: ugtk2.pm:952
-#, c-format
-msgid "Expand Tree"
-msgstr "展開樹狀結構"
-
-#: ugtk2.pm:953
-#, c-format
-msgid "Collapse Tree"
-msgstr "縮疊樹狀結構"
-
-#: ugtk2.pm:954
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "切換是否依照群組來加以排序"
-
 #: wizards.pm:95
 #, c-format
 msgid ""
@@ -6499,6 +6484,26 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安裝失敗"
 
+#~ msgid ""
+#~ "If you plan to use aboot, be careful to leave a free space (2048 sectors "
+#~ "is enough)\n"
+#~ "at the beginning of the disk"
+#~ msgstr ""
+#~ "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的"
+#~ "空間 (2048 扇區就足夠了)"
+
+#~ msgid "Security level"
+#~ msgstr "安全層級"
+
+#~ msgid "Expand Tree"
+#~ msgstr "展開樹狀結構"
+
+#~ msgid "Collapse Tree"
+#~ msgstr "縮疊樹狀結構"
+
+#~ msgid "Toggle between flat and group sorted"
+#~ msgstr "切換是否依照群組來加以排序"
+
 #~ msgid "Choose action"
 #~ msgstr "選擇動作"