Update POT file

1 files changed, 344 insertions, 335 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index e3f3dfafe..877ef259a 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2009-10-07 13:57+0200\n"
+"POT-Creation-Date: 2010-01-27 17:55+0100\n"
 "PO-Revision-Date: 2008-10-18 00:45+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -29,10 +29,10 @@ msgstr ""
 "X-Poedit-Language: Chinese\n"
 "X-Poedit-Country: TAIWAN\n"
 
-#: any.pm:252 any.pm:910 diskdrake/interactive.pm:594
-#: diskdrake/interactive.pm:794 diskdrake/interactive.pm:838
-#: diskdrake/interactive.pm:942 diskdrake/interactive.pm:1196
-#: diskdrake/interactive.pm:1248 do_pkgs.pm:241 do_pkgs.pm:287
+#: any.pm:252 any.pm:929 diskdrake/interactive.pm:597
+#: diskdrake/interactive.pm:802 diskdrake/interactive.pm:846
+#: diskdrake/interactive.pm:950 diskdrake/interactive.pm:1204
+#: diskdrake/interactive.pm:1256 do_pkgs.pm:241 do_pkgs.pm:287
 #: harddrake/sound.pm:303 interactive.pm:587 pkgs.pm:281
 #, c-format
 msgid "Please wait"
@@ -186,7 +186,7 @@ msgstr "啟用 APIC"
 msgid "Enable Local APIC"
 msgstr "啟用本地 APIC"
 
-#: any.pm:415 any.pm:855 any.pm:871 authentication.pm:250
+#: any.pm:415 any.pm:867 any.pm:883 authentication.pm:250
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
@@ -197,7 +197,7 @@ msgstr "密碼"
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:417 authentication.pm:261 diskdrake/interactive.pm:1420
+#: any.pm:417 authentication.pm:261 diskdrake/interactive.pm:1428
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
@@ -207,7 +207,7 @@ msgstr "請再試一次"
 msgid "You can not use a password with %s"
 msgstr "您不能使用 %s 作為密碼"
 
-#: any.pm:421 any.pm:857 any.pm:873 authentication.pm:251
+#: any.pm:421 any.pm:869 any.pm:885 authentication.pm:251
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
@@ -298,7 +298,7 @@ msgstr "Initrd"
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:532 any.pm:537 any.pm:539 diskdrake/interactive.pm:404
+#: any.pm:532 any.pm:537 any.pm:539 diskdrake/interactive.pm:407
 #, c-format
 msgid "Label"
 msgstr "標籤"
@@ -372,189 +372,194 @@ msgstr ""
 "目前有這些選項在您的開機選單中。\n"
 "您可以建立更多的選項或修改既有的選項。"
 
-#: any.pm:816
+#: any.pm:827
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:817
+#: any.pm:828
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 RPM 套件工具程式"
 
-#: any.pm:818
+#: any.pm:829
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:819
+#: any.pm:830
 #, c-format
 msgid "access to administrative files"
 msgstr "存取系統管理者權限的檔案"
 
-#: any.pm:820
+#: any.pm:831
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:821
+#: any.pm:832
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:827
+#: any.pm:838
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:833
+#: any.pm:844
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:834
+#: any.pm:845
 #, fuzzy, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
 "cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
-#: any.pm:835
+#: any.pm:846
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:836
+#: any.pm:847
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:842 any.pm:875
+#: any.pm:853 any.pm:887
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:842 any.pm:876
+#: any.pm:853 any.pm:888
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
 
-#: any.pm:843
+#: any.pm:854
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必須是數字"
 
-#: any.pm:844
+#: any.pm:855
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:848
+#: any.pm:859
 #, c-format
 msgid "User management"
 msgstr "使用者管理"
 
-#: any.pm:854 authentication.pm:237
+#: any.pm:865
+#, c-format
+msgid "Enable guest account"
+msgstr ""
+
+#: any.pm:866 authentication.pm:237
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "設定管理者 (root) 密碼"
 
-#: any.pm:859
+#: any.pm:871
 #, c-format
 msgid "Enter a user"
 msgstr "輸入一位使用者"
 
-#: any.pm:861
+#: any.pm:873
 #, c-format
 msgid "Icon"
 msgstr "圖示"
 
-#: any.pm:864
+#: any.pm:876
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:869
+#: any.pm:881
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:874
+#: any.pm:886
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:910
+#: any.pm:929
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "請稍後，新增媒體中..."
 
-#: any.pm:940 security/l10n.pm:14
+#: any.pm:959 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:941
+#: any.pm:960
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
 
-#: any.pm:942
+#: any.pm:961
 #, c-format
 msgid "Use this feature"
 msgstr "使用此功能"
 
-#: any.pm:943
+#: any.pm:962
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者："
 
-#: any.pm:944
+#: any.pm:963
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:955 any.pm:975 any.pm:1048
+#: any.pm:974 any.pm:994 any.pm:1067
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: any.pm:982 any.pm:1340 interactive/gtk.pm:819
+#: any.pm:1001 any.pm:1355 interactive/gtk.pm:819
 #, c-format
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:1034
+#: any.pm:1053
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: any.pm:1036 diskdrake/dav.pm:26
+#: any.pm:1055 diskdrake/dav.pm:26
 #, c-format
 msgid "Quit"
 msgstr "離開"
 
-#: any.pm:1043
+#: any.pm:1062
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "您接受這份授權嗎？"
 
-#: any.pm:1044
+#: any.pm:1063
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:1044
+#: any.pm:1063
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: any.pm:1070 any.pm:1136
+#: any.pm:1089 any.pm:1151
 #, c-format
 msgid "Please choose a language to use"
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:1099
+#: any.pm:1117
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -564,77 +569,77 @@ msgstr ""
 "Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
 "它們將可供您完成安裝並重新啟動系統之後使用。"
 
-#: any.pm:1102
+#: any.pm:1120
 #, c-format
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:1113 any.pm:1145
+#: any.pm:1129 any.pm:1160
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "舊式相容 (非 UTF-8) 編碼"
 
-#: any.pm:1115
+#: any.pm:1130
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:1137
+#: any.pm:1152
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:1191
+#: any.pm:1206
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:1192
+#: any.pm:1207
 #, c-format
 msgid "Please choose your country"
 msgstr "請選擇您的國家。"
 
-#: any.pm:1194
+#: any.pm:1209
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:1195
+#: any.pm:1210
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:1195 interactive.pm:488 interactive/gtk.pm:445
+#: any.pm:1210 interactive.pm:488 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:1201
+#: any.pm:1216
 #, c-format
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:1204
+#: any.pm:1219
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: any.pm:1289
+#: any.pm:1304
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -649,32 +654,32 @@ msgstr ""
 "\n"
 "\"自訂\" 允許每一個使用者自行設定。\n"
 
-#: any.pm:1301
+#: any.pm:1316
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
-#: any.pm:1304
+#: any.pm:1319
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
-#: any.pm:1312
+#: any.pm:1327
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
-#: any.pm:1340
+#: any.pm:1355
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1342
+#: any.pm:1357
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -683,54 +688,54 @@ msgstr ""
 "每個使用者的分享都是使用 \"fileshare\" 群組。\n"
 "您可以執行 userdrake 在該群組內加入使用者。"
 
-#: any.pm:1448
+#: any.pm:1463
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
 "logout now."
 msgstr "您必須登出之後重新登入才能讓變動生效。馬上登出請按下確定。"
 
-#: any.pm:1452
+#: any.pm:1467
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您必須登出之後重新登入才能讓變動生效"
 
-#: any.pm:1487
+#: any.pm:1502
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: any.pm:1487
+#: any.pm:1502
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何？"
 
-#: any.pm:1510 any.pm:1512
+#: any.pm:1525 any.pm:1527
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、時間與時區設定"
 
-#: any.pm:1513
+#: any.pm:1528
 #, c-format
 msgid "What is the best time?"
 msgstr "最佳的時間是哪一個？"
 
-#: any.pm:1517
+#: any.pm:1532
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬體時鐘設定為 UTC 時間)"
 
-#: any.pm:1518
+#: any.pm:1533
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬體時鐘設定為本地時間)"
 
-#: any.pm:1520
+#: any.pm:1535
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 伺服器"
 
-#: any.pm:1521
+#: any.pm:1536
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自動時間同步 (使用 NTP 服務)"
@@ -1053,7 +1058,7 @@ msgid "Domain Admin Password"
 msgstr "網域管理者密碼"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:960
+#: bootloader.pm:964
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1068,56 +1073,56 @@ msgstr ""
 "wait for default boot.\n"
 "\n"
 
-#: bootloader.pm:1132
+#: bootloader.pm:1141
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO 文字介面選單"
 
-#: bootloader.pm:1133
+#: bootloader.pm:1142
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB 圖形介面選單"
 
-#: bootloader.pm:1134
+#: bootloader.pm:1143
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB 文字介面選單"
 
-#: bootloader.pm:1135
+#: bootloader.pm:1144
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:1136
+#: bootloader.pm:1145
 #, c-format
 msgid "SILO"
 msgstr "SILO"
 
-#: bootloader.pm:1218
+#: bootloader.pm:1227
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 沒有足夠的空間"
 
-#: bootloader.pm:1874
+#: bootloader.pm:1883
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "您無法把開機載入程式安裝在 %s 分割區上\n"
 
-#: bootloader.pm:1995
+#: bootloader.pm:2004
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
-#: bootloader.pm:2008
+#: bootloader.pm:2017
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
 
-#: bootloader.pm:2009
+#: bootloader.pm:2018
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安裝開機載入程式"
@@ -1184,12 +1189,12 @@ msgstr ""
 msgid "New"
 msgstr "新增"
 
-#: diskdrake/dav.pm:63 diskdrake/interactive.pm:411 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:63 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Unmount"
 msgstr "卸載"
 
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:407 diskdrake/smbnfs_gtk.pm:76
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:410 diskdrake/smbnfs_gtk.pm:76
 #, c-format
 msgid "Mount"
 msgstr "掛載"
@@ -1199,16 +1204,16 @@ msgstr "掛載"
 msgid "Server"
 msgstr "伺服器"
 
-#: diskdrake/dav.pm:66 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:666 diskdrake/interactive.pm:684
-#: diskdrake/interactive.pm:688 diskdrake/removable.pm:23
+#: diskdrake/dav.pm:66 diskdrake/interactive.pm:404
+#: diskdrake/interactive.pm:674 diskdrake/interactive.pm:692
+#: diskdrake/interactive.pm:696 diskdrake/removable.pm:23
 #: diskdrake/smbnfs_gtk.pm:79
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
 
-#: diskdrake/dav.pm:67 diskdrake/interactive.pm:403
-#: diskdrake/interactive.pm:1090 diskdrake/removable.pm:24
+#: diskdrake/dav.pm:67 diskdrake/interactive.pm:406
+#: diskdrake/interactive.pm:1098 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1227,11 +1232,11 @@ msgstr "完成"
 
 #: diskdrake/dav.pm:78 diskdrake/hd_gtk.pm:128 diskdrake/hd_gtk.pm:294
 #: diskdrake/interactive.pm:247 diskdrake/interactive.pm:260
-#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:520
-#: diskdrake/interactive.pm:525 diskdrake/interactive.pm:656
-#: diskdrake/interactive.pm:909 diskdrake/interactive.pm:960
-#: diskdrake/interactive.pm:1136 diskdrake/interactive.pm:1149
-#: diskdrake/interactive.pm:1152 diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:453 diskdrake/interactive.pm:523
+#: diskdrake/interactive.pm:528 diskdrake/interactive.pm:664
+#: diskdrake/interactive.pm:917 diskdrake/interactive.pm:968
+#: diskdrake/interactive.pm:1144 diskdrake/interactive.pm:1157
+#: diskdrake/interactive.pm:1160 diskdrake/interactive.pm:1428
 #: diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23 do_pkgs.pm:28 do_pkgs.pm:44
 #: do_pkgs.pm:60 do_pkgs.pm:65 do_pkgs.pm:82 fsedit.pm:246
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
@@ -1251,12 +1256,12 @@ msgstr "請輸入 WevDAV 主機 URL"
 msgid "The URL must begin with http:// or https://"
 msgstr "URL 格式必須為 http:// 或是 https://"
 
-#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:412 diskdrake/interactive.pm:303
-#: diskdrake/interactive.pm:388 diskdrake/interactive.pm:550
-#: diskdrake/interactive.pm:747 diskdrake/interactive.pm:805
-#: diskdrake/interactive.pm:940 diskdrake/interactive.pm:982
-#: diskdrake/interactive.pm:983 diskdrake/interactive.pm:1233
-#: diskdrake/interactive.pm:1271 diskdrake/interactive.pm:1419 do_pkgs.pm:19
+#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:412 diskdrake/interactive.pm:306
+#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:553
+#: diskdrake/interactive.pm:755 diskdrake/interactive.pm:813
+#: diskdrake/interactive.pm:948 diskdrake/interactive.pm:990
+#: diskdrake/interactive.pm:991 diskdrake/interactive.pm:1241
+#: diskdrake/interactive.pm:1279 diskdrake/interactive.pm:1427 do_pkgs.pm:19
 #: do_pkgs.pm:39 do_pkgs.pm:57 do_pkgs.pm:77 harddrake/sound.pm:442
 #, c-format
 msgid "Warning"
@@ -1272,23 +1277,23 @@ msgstr "您要按這個按鈕嗎？"
 msgid "Server: "
 msgstr "伺服器："
 
-#: diskdrake/dav.pm:125 diskdrake/interactive.pm:493
-#: diskdrake/interactive.pm:1295 diskdrake/interactive.pm:1380
+#: diskdrake/dav.pm:125 diskdrake/interactive.pm:496
+#: diskdrake/interactive.pm:1303 diskdrake/interactive.pm:1388
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1387
+#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1395
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
 
-#: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:298
+#: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:301
 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106
-#: fs/partitioning_wizard.pm:52 fs/partitioning_wizard.pm:222
-#: fs/partitioning_wizard.pm:230 fs/partitioning_wizard.pm:269
-#: fs/partitioning_wizard.pm:388 fs/partitioning_wizard.pm:445
-#: fs/partitioning_wizard.pm:518 fs/partitioning_wizard.pm:521
+#: fs/partitioning_wizard.pm:53 fs/partitioning_wizard.pm:235
+#: fs/partitioning_wizard.pm:243 fs/partitioning_wizard.pm:282
+#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:495
+#: fs/partitioning_wizard.pm:568 fs/partitioning_wizard.pm:571
 #, c-format
 msgid "Partitioning"
 msgstr "分割磁區"
@@ -1298,8 +1303,8 @@ msgstr "分割磁區"
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr "點選一個分割區，選擇檔案系統類型然後選擇一個動作"
 
-#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1111
-#: diskdrake/interactive.pm:1121 diskdrake/interactive.pm:1174
+#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1119
+#: diskdrake/interactive.pm:1129 diskdrake/interactive.pm:1182
 #, c-format
 msgid "Read carefully"
 msgstr "仔細閱讀！"
@@ -1319,7 +1324,7 @@ msgstr "離開"
 msgid "Continue"
 msgstr "繼續"
 
-#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:493 interactive.pm:653
+#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:544 interactive.pm:653
 #: interactive/gtk.pm:811 interactive/gtk.pm:829 interactive/gtk.pm:850
 #: ugtk2.pm:936
 #, c-format
@@ -1358,41 +1363,42 @@ msgid "Unknown"
 msgstr "未知的"
 
 #: diskdrake/hd_gtk.pm:383
-#, c-format
-msgid "Ext3"
-msgstr "Ext3"
+#, fuzzy, c-format
+msgid "Ext4"
+msgstr "離開"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "Swap"
 msgstr "Swap"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "SunOS"
 msgstr "SunOS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "HFS"
 msgstr "HFS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:384 services.pm:158
+#: diskdrake/hd_gtk.pm:384 fs/partitioning_wizard.pm:402 services.pm:158
 #, c-format
 msgid "Other"
 msgstr "其他"
 
-#: diskdrake/hd_gtk.pm:384 diskdrake/interactive.pm:1310
+#: diskdrake/hd_gtk.pm:384 diskdrake/interactive.pm:1318
+#: fs/partitioning_wizard.pm:402
 #, c-format
 msgid "Empty"
 msgstr "空白"
@@ -1417,8 +1423,8 @@ msgstr "要先 ``Unmount''"
 msgid "Use ``%s'' instead (in expert mode)"
 msgstr "用 ``%s'' 代替 (在專家模式)"
 
-#: diskdrake/hd_gtk.pm:421 diskdrake/interactive.pm:402
-#: diskdrake/interactive.pm:588 diskdrake/removable.pm:25
+#: diskdrake/hd_gtk.pm:421 diskdrake/interactive.pm:405
+#: diskdrake/interactive.pm:591 diskdrake/removable.pm:25
 #: diskdrake/removable.pm:48
 #, c-format
 msgid "Type"
@@ -1434,14 +1440,14 @@ msgstr "選擇另一個分割區"
 msgid "Choose a partition"
 msgstr "選擇一個分割區"
 
-#: diskdrake/interactive.pm:273 diskdrake/interactive.pm:379
+#: diskdrake/interactive.pm:273 diskdrake/interactive.pm:382
 #: interactive/curses.pm:512
 #, c-format
 msgid "More"
 msgstr "更多"
 
-#: diskdrake/interactive.pm:281 diskdrake/interactive.pm:291
-#: diskdrake/interactive.pm:1218
+#: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
+#: diskdrake/interactive.pm:1226
 #, c-format
 msgid "Confirmation"
 msgstr "確認"
@@ -1461,17 +1467,17 @@ msgstr "不儲存就離開"
 msgid "Quit without writing the partition table?"
 msgstr "放棄寫入硬碟分割表就離開？"
 
-#: diskdrake/interactive.pm:291
+#: diskdrake/interactive.pm:294
 #, c-format
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"
 
-#: diskdrake/interactive.pm:298 fs/partitioning_wizard.pm:269
+#: diskdrake/interactive.pm:301 fs/partitioning_wizard.pm:282
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "您必須重新開機以使更動過的硬碟分割表生效"
 
-#: diskdrake/interactive.pm:303
+#: diskdrake/interactive.pm:306
 #, c-format
 msgid ""
 "You should format partition %s.\n"
@@ -1482,159 +1488,159 @@ msgstr ""
 "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
 "仍然要離開嗎？"
 
-#: diskdrake/interactive.pm:316
+#: diskdrake/interactive.pm:319
 #, c-format
 msgid "Clear all"
 msgstr "全部清除"
 
-#: diskdrake/interactive.pm:317
+#: diskdrake/interactive.pm:320
 #, c-format
 msgid "Auto allocate"
 msgstr "自動分配"
 
-#: diskdrake/interactive.pm:323
+#: diskdrake/interactive.pm:326
 #, c-format
 msgid "Toggle to normal mode"
 msgstr "切換到一般模式"
 
-#: diskdrake/interactive.pm:323
+#: diskdrake/interactive.pm:326
 #, c-format
 msgid "Toggle to expert mode"
 msgstr "切換到專家模式"
 
-#: diskdrake/interactive.pm:335
+#: diskdrake/interactive.pm:338
 #, c-format
 msgid "Hard drive information"
 msgstr "硬碟資訊"
 
-#: diskdrake/interactive.pm:368
+#: diskdrake/interactive.pm:371
 #, c-format
 msgid "All primary partitions are used"
 msgstr "主分割區數目已經全被用了"
 
-#: diskdrake/interactive.pm:369
+#: diskdrake/interactive.pm:372
 #, c-format
 msgid "I can not add any more partitions"
 msgstr "我無法再新增任何分割區了"
 
-#: diskdrake/interactive.pm:370
+#: diskdrake/interactive.pm:373
 #, c-format
 msgid ""
 "To have more partitions, please delete one to be able to create an extended "
 "partition"
 msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區"
 
-#: diskdrake/interactive.pm:381
+#: diskdrake/interactive.pm:384
 #, c-format
 msgid "Reload partition table"
 msgstr "重新載入硬碟分割表"
 
-#: diskdrake/interactive.pm:388
+#: diskdrake/interactive.pm:391
 #, c-format
 msgid "Detailed information"
 msgstr "詳細資訊"
 
-#: diskdrake/interactive.pm:400
+#: diskdrake/interactive.pm:403
 #, c-format
 msgid "View"
 msgstr ""
 
-#: diskdrake/interactive.pm:405 diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:768
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
 
-#: diskdrake/interactive.pm:406
+#: diskdrake/interactive.pm:409
 #, c-format
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:870
+#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:878
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:891
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:899
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
 
-#: diskdrake/interactive.pm:410
+#: diskdrake/interactive.pm:413
 #, c-format
 msgid "Use"
 msgstr "使用"
 
-#: diskdrake/interactive.pm:412
+#: diskdrake/interactive.pm:415
 #, c-format
 msgid "Delete"
 msgstr "刪除"
 
-#: diskdrake/interactive.pm:413
+#: diskdrake/interactive.pm:416
 #, c-format
 msgid "Remove from RAID"
 msgstr "由磁碟陣列中移除"
 
-#: diskdrake/interactive.pm:414
+#: diskdrake/interactive.pm:417
 #, c-format
 msgid "Remove from LVM"
 msgstr "由 LVM 中移除"
 
-#: diskdrake/interactive.pm:415
+#: diskdrake/interactive.pm:418
 #, c-format
 msgid "Remove from dm"
 msgstr "從 dm 中移除"
 
-#: diskdrake/interactive.pm:416
+#: diskdrake/interactive.pm:419
 #, c-format
 msgid "Modify RAID"
 msgstr "變更磁碟陣列"
 
-#: diskdrake/interactive.pm:417
+#: diskdrake/interactive.pm:420
 #, c-format
 msgid "Use for loopback"
 msgstr "作為 loopback"
 
-#: diskdrake/interactive.pm:428
+#: diskdrake/interactive.pm:431
 #, c-format
 msgid "Create"
 msgstr "建立"
 
-#: diskdrake/interactive.pm:450
+#: diskdrake/interactive.pm:453
 #, fuzzy, c-format
 msgid "Failed to mount partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:482 diskdrake/interactive.pm:484
+#: diskdrake/interactive.pm:485 diskdrake/interactive.pm:487
 #, c-format
 msgid "Create a new partition"
 msgstr "建立新的分割區"
 
-#: diskdrake/interactive.pm:486
+#: diskdrake/interactive.pm:489
 #, c-format
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:489 diskdrake/interactive.pm:975
+#: diskdrake/interactive.pm:492 diskdrake/interactive.pm:983
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:491 diskdrake/interactive.pm:976
+#: diskdrake/interactive.pm:494 diskdrake/interactive.pm:984
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
 
-#: diskdrake/interactive.pm:497
+#: diskdrake/interactive.pm:500
 #, c-format
 msgid "Preference: "
 msgstr "偏好設定："
 
-#: diskdrake/interactive.pm:500
+#: diskdrake/interactive.pm:503
 #, c-format
 msgid "Logical volume name "
 msgstr "邏輯磁區名稱"
 
-#: diskdrake/interactive.pm:520
+#: diskdrake/interactive.pm:523
 #, c-format
 msgid ""
 "You can not create a new partition\n"
@@ -1645,68 +1651,68 @@ msgstr ""
 "(因為您已經達到主分割區的最大值)。\n"
 "您需要先移除一個主分割區然後建立一個延伸分割區。"
 
-#: diskdrake/interactive.pm:550
+#: diskdrake/interactive.pm:553
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:572
+#: diskdrake/interactive.pm:575
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:585
+#: diskdrake/interactive.pm:588
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:587 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:590 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:594
+#: diskdrake/interactive.pm:597
 #, c-format
 msgid "Switching from %s to %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: diskdrake/interactive.pm:624
+#: diskdrake/interactive.pm:632
 #, c-format
 msgid "Set volume label"
 msgstr "設定磁區標籤 "
 
-#: diskdrake/interactive.pm:626
+#: diskdrake/interactive.pm:634
 #, c-format
 msgid "Beware, this will be written to disk as soon as you validate!"
 msgstr "注意，在您確定變更之後將會被寫入磁碟！"
 
-#: diskdrake/interactive.pm:627
+#: diskdrake/interactive.pm:635
 #, fuzzy, c-format
 msgid "Beware, this will be written to disk only after formatting!"
 msgstr "注意，在您確定變更之後將會被寫入磁碟！"
 
-#: diskdrake/interactive.pm:629
+#: diskdrake/interactive.pm:637
 #, c-format
 msgid "Which volume label?"
 msgstr "哪一個磁區標籤？"
 
-#: diskdrake/interactive.pm:630
+#: diskdrake/interactive.pm:638
 #, c-format
 msgid "Label:"
 msgstr "標籤："
 
-#: diskdrake/interactive.pm:651
+#: diskdrake/interactive.pm:659
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:652
+#: diskdrake/interactive.pm:660
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:657
+#: diskdrake/interactive.pm:665
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -1715,58 +1721,58 @@ msgstr ""
 "因為這個分割區被用作 loop back 使用，所以無法解除\n"
 "這個掛載點。請先取消 loopback 的設定"
 
-#: diskdrake/interactive.pm:687
+#: diskdrake/interactive.pm:695
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:711 diskdrake/interactive.pm:794
-#: fs/partitioning_wizard.pm:129 fs/partitioning_wizard.pm:191
+#: diskdrake/interactive.pm:719 diskdrake/interactive.pm:802
+#: fs/partitioning_wizard.pm:128 fs/partitioning_wizard.pm:204
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:711
+#: diskdrake/interactive.pm:719
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:747
+#: diskdrake/interactive.pm:755
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:752
+#: diskdrake/interactive.pm:760
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "所有在這個分割區上的資料都應該先經過備份"
 
-#: diskdrake/interactive.pm:754
+#: diskdrake/interactive.pm:762
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:761
+#: diskdrake/interactive.pm:769
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:762
+#: diskdrake/interactive.pm:770
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:763
+#: diskdrake/interactive.pm:771
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小容量：%s MB"
 
-#: diskdrake/interactive.pm:764
+#: diskdrake/interactive.pm:772
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大容量：%s MB"
 
-#: diskdrake/interactive.pm:805
+#: diskdrake/interactive.pm:813 fs/partitioning_wizard.pm:212
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s),\n"
@@ -1775,57 +1781,57 @@ msgstr ""
 "為確保重新調整分割區大小後的資料正確性，\n"
 " 您下次從 Microsoft Windows® 開機時會執行檔案系統檢查。 "
 
-#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:1415
+#: diskdrake/interactive.pm:861 diskdrake/interactive.pm:1423
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:854
+#: diskdrake/interactive.pm:862
 #, c-format
 msgid "Enter your filesystem encryption key"
 msgstr "請輸入您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:855 diskdrake/interactive.pm:1423
+#: diskdrake/interactive.pm:863 diskdrake/interactive.pm:1431
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:870
 #, c-format
 msgid "Invalid key"
 msgstr ""
 
-#: diskdrake/interactive.pm:870
+#: diskdrake/interactive.pm:878
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:872 diskdrake/interactive.pm:893
+#: diskdrake/interactive.pm:880 diskdrake/interactive.pm:901
 #, c-format
 msgid "new"
 msgstr "新增"
 
-#: diskdrake/interactive.pm:891
+#: diskdrake/interactive.pm:899
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:903 diskdrake/interactive.pm:912
+#: diskdrake/interactive.pm:911 diskdrake/interactive.pm:920
 #, fuzzy, c-format
 msgid "LVM name"
 msgstr "LVM 名稱？"
 
-#: diskdrake/interactive.pm:904
+#: diskdrake/interactive.pm:912
 #, c-format
 msgid "Enter a name for the new LVM volume group"
 msgstr ""
 
-#: diskdrake/interactive.pm:909
+#: diskdrake/interactive.pm:917
 #, fuzzy, c-format
 msgid "\"%s\" already exists"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:940
+#: diskdrake/interactive.pm:948
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1834,117 +1840,117 @@ msgstr ""
 "實體磁區 %s 仍然在使用中。\n"
 "您要把位於這個磁區的實體延伸移到另一個磁區嗎？"
 
-#: diskdrake/interactive.pm:942
+#: diskdrake/interactive.pm:950
 #, c-format
 msgid "Moving physical extents"
 msgstr "移動實體延伸"
 
-#: diskdrake/interactive.pm:960
+#: diskdrake/interactive.pm:968
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "這個分割區不能用來作為 loopback"
 
-#: diskdrake/interactive.pm:973
+#: diskdrake/interactive.pm:981
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:974
+#: diskdrake/interactive.pm:982
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:979
+#: diskdrake/interactive.pm:987
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:982
+#: diskdrake/interactive.pm:990
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:983
+#: diskdrake/interactive.pm:991
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:1015 diskdrake/interactive.pm:1018
+#: diskdrake/interactive.pm:1023 diskdrake/interactive.pm:1026
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:1025
+#: diskdrake/interactive.pm:1033
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1092
+#: diskdrake/interactive.pm:1100
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1093
+#: diskdrake/interactive.pm:1101
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1094
+#: diskdrake/interactive.pm:1102
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 KiB 計量"
 
-#: diskdrake/interactive.pm:1112
+#: diskdrake/interactive.pm:1120
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1127
+#: diskdrake/interactive.pm:1135
 #, c-format
 msgid "Partitioning Type"
 msgstr "磁區格式"
 
-#: diskdrake/interactive.pm:1127
+#: diskdrake/interactive.pm:1135
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1165
+#: diskdrake/interactive.pm:1173
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: diskdrake/interactive.pm:1174
+#: diskdrake/interactive.pm:1182
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1196 fs/format.pm:96 fs/format.pm:103
+#: diskdrake/interactive.pm:1204 fs/format.pm:99 fs/format.pm:106
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
 
-#: diskdrake/interactive.pm:1209
+#: diskdrake/interactive.pm:1217
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1218 fs/partitioning.pm:48
+#: diskdrake/interactive.pm:1226 fs/partitioning.pm:48
 #, c-format
 msgid "Check bad blocks?"
 msgstr "檢查壞掉的區塊？"
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1240
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1240
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1233
+#: diskdrake/interactive.pm:1241
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1960,128 +1966,128 @@ msgstr ""
 "您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起"
 "來，而目錄中顯示出來的會是掛載上的磁區內容)"
 
-#: diskdrake/interactive.pm:1248
+#: diskdrake/interactive.pm:1256
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1252
+#: diskdrake/interactive.pm:1260
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1256
+#: diskdrake/interactive.pm:1264
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1270
+#: diskdrake/interactive.pm:1278
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分割區 %s 現在被命名為 %s 了"
 
-#: diskdrake/interactive.pm:1271
+#: diskdrake/interactive.pm:1279
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1296 diskdrake/interactive.pm:1364
+#: diskdrake/interactive.pm:1304 diskdrake/interactive.pm:1372
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1297
+#: diskdrake/interactive.pm:1305
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤："
 
-#: diskdrake/interactive.pm:1298
+#: diskdrake/interactive.pm:1306
 #, c-format
 msgid "UUID: "
 msgstr "UUID:"
 
-#: diskdrake/interactive.pm:1299
+#: diskdrake/interactive.pm:1307
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1303 diskdrake/interactive.pm:1312
-#: diskdrake/interactive.pm:1383
+#: diskdrake/interactive.pm:1311 diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1391
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1307 diskdrake/interactive.pm:1368
+#: diskdrake/interactive.pm:1315 diskdrake/interactive.pm:1376
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1314
+#: diskdrake/interactive.pm:1322
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1315
+#: diskdrake/interactive.pm:1323
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1317
+#: diskdrake/interactive.pm:1325
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1319
+#: diskdrake/interactive.pm:1327
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1328
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "邏輯延伸的數目：%d\n"
 
-#: diskdrake/interactive.pm:1321
+#: diskdrake/interactive.pm:1329
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1322
+#: diskdrake/interactive.pm:1330
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1323
+#: diskdrake/interactive.pm:1331
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1324
+#: diskdrake/interactive.pm:1332
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1326
+#: diskdrake/interactive.pm:1334
 #, c-format
 msgid "Encrypted"
 msgstr "已加密"
 
-#: diskdrake/interactive.pm:1326
+#: diskdrake/interactive.pm:1334
 #, c-format
 msgid " (mapped on %s)"
 msgstr ""
 
-#: diskdrake/interactive.pm:1327
+#: diskdrake/interactive.pm:1335
 #, c-format
 msgid " (to map on %s)"
 msgstr ""
 
-#: diskdrake/interactive.pm:1328
+#: diskdrake/interactive.pm:1336
 #, c-format
 msgid " (inactive)"
 msgstr "(未啟動)"
 
-#: diskdrake/interactive.pm:1334
+#: diskdrake/interactive.pm:1342
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2090,7 +2096,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1335
+#: diskdrake/interactive.pm:1343
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2099,27 +2105,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1337
+#: diskdrake/interactive.pm:1345
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1338
+#: diskdrake/interactive.pm:1346
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1339
+#: diskdrake/interactive.pm:1347
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1341
+#: diskdrake/interactive.pm:1349
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1344
+#: diskdrake/interactive.pm:1352
 #, c-format
 msgid ""
 "\n"
@@ -2132,7 +2138,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1347
+#: diskdrake/interactive.pm:1355
 #, c-format
 msgid ""
 "\n"
@@ -2144,67 +2150,67 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1356
+#: diskdrake/interactive.pm:1364
 #, c-format
 msgid "Free space on %s (%s)"
 msgstr "%s 上的可用空間 (%s)"
 
-#: diskdrake/interactive.pm:1365
+#: diskdrake/interactive.pm:1373
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1366
+#: diskdrake/interactive.pm:1374
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1367
+#: diskdrake/interactive.pm:1375
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1369
+#: diskdrake/interactive.pm:1377
 #, c-format
 msgid "Medium type: "
 msgstr "媒體型式："
 
-#: diskdrake/interactive.pm:1370
+#: diskdrake/interactive.pm:1378
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1371
+#: diskdrake/interactive.pm:1379
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1372
+#: diskdrake/interactive.pm:1380
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1416
+#: diskdrake/interactive.pm:1424
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1419
+#: diskdrake/interactive.pm:1427
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:1428
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:1424
+#: diskdrake/interactive.pm:1432
 #, c-format
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:1426
+#: diskdrake/interactive.pm:1434
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密演算法"
@@ -2216,7 +2222,7 @@ msgstr "改變分割區格式"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:550
 #: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846 ugtk2.pm:415
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:847 ugtk2.pm:415
 #: ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
 #, c-format
 msgid "Cancel"
@@ -2307,32 +2313,32 @@ msgstr ""
 "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體"
 "以找出問題的原因所在"
 
-#: fs/any.pm:75 fs/partitioning_wizard.pm:60
+#: fs/any.pm:75 fs/partitioning_wizard.pm:61
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
 
-#: fs/format.pm:100
+#: fs/format.pm:103
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "建立並格式化檔案 %s"
 
-#: fs/format.pm:119
+#: fs/format.pm:122
 #, c-format
 msgid "I do not know how to set label on %s with type %s"
 msgstr "我不知道如何在 %s 上設定型態 %s 的標籤"
 
-#: fs/format.pm:126
+#: fs/format.pm:131
 #, fuzzy, c-format
 msgid "setting label on %s failed, is it formatted?"
 msgstr "無法在 %s 上設定標籤"
 
-#: fs/format.pm:167
+#: fs/format.pm:172
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道要如何將 %s 格式化為 %s 格式"
 
-#: fs/format.pm:172 fs/format.pm:174
+#: fs/format.pm:177 fs/format.pm:179
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "以 %s 格式化 %s 失敗"
@@ -2505,7 +2511,7 @@ msgstr "無法檢查檔案系統 %s。您要修復該錯誤嗎？ (請注意，�
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝，請增加一些"
 
-#: fs/partitioning_wizard.pm:52
+#: fs/partitioning_wizard.pm:53
 #, c-format
 msgid ""
 "You must have a root partition.\n"
@@ -2516,7 +2522,7 @@ msgstr ""
 "請建立一個分割區 (或點選一個已經存在的)，\n"
 "接著選動作 \"掛載點\" 且把它設成 \"/\""
 
-#: fs/partitioning_wizard.pm:57
+#: fs/partitioning_wizard.pm:58
 #, c-format
 msgid ""
 "You do not have a swap partition.\n"
@@ -2527,42 +2533,42 @@ msgstr ""
 "\n"
 "不管如何都要繼續？"
 
-#: fs/partitioning_wizard.pm:93
+#: fs/partitioning_wizard.pm:92
 #, c-format
 msgid "Use free space"
 msgstr "使用未用到的空間"
 
-#: fs/partitioning_wizard.pm:95
+#: fs/partitioning_wizard.pm:94
 #, c-format
 msgid "Not enough free space to allocate new partitions"
 msgstr "沒有足夠的空間可以建立新的分割區了"
 
-#: fs/partitioning_wizard.pm:103
+#: fs/partitioning_wizard.pm:102
 #, c-format
 msgid "Use existing partitions"
 msgstr "使用已經存在的分割區"
 
-#: fs/partitioning_wizard.pm:105
+#: fs/partitioning_wizard.pm:104
 #, c-format
 msgid "There is no existing partition to use"
 msgstr "沒有已經存在的分割區可供使用"
 
-#: fs/partitioning_wizard.pm:129
+#: fs/partitioning_wizard.pm:128
 #, c-format
 msgid "Computing the size of the Microsoft Windows® partition"
 msgstr "正在計算 Microsoft Windows® 分割區大小"
 
-#: fs/partitioning_wizard.pm:148
+#: fs/partitioning_wizard.pm:164
 #, c-format
 msgid "Use the free space on a Microsoft Windows® partition"
 msgstr "使用 Microsoft Windows® 分割區中所剩餘的可用空間"
 
-#: fs/partitioning_wizard.pm:152
+#: fs/partitioning_wizard.pm:168
 #, c-format
 msgid "Which partition do you want to resize?"
 msgstr "您要重新調整那個分割區的大小？"
 
-#: fs/partitioning_wizard.pm:162
+#: fs/partitioning_wizard.pm:171
 #, c-format
 msgid ""
 "Your Microsoft Windows® partition is too fragmented. Please reboot your "
@@ -2572,7 +2578,7 @@ msgstr ""
 "您的 Microsoft Windows® 分割區太支離破碎。請先用 Microsoft Windows® 重新開"
 "機，執行 ``defrag'' 工具程式，然後重新開始安裝 Mandriva Linux 。"
 
-#: fs/partitioning_wizard.pm:166
+#: fs/partitioning_wizard.pm:179
 #, c-format
 msgid ""
 "WARNING!\n"
@@ -2606,82 +2612,73 @@ msgstr ""
 "當您確定之後，請按下%s。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:175 fs/partitioning_wizard.pm:498
+#: fs/partitioning_wizard.pm:188 fs/partitioning_wizard.pm:548
 #: interactive.pm:549 interactive/curses.pm:263 ugtk2.pm:519
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
-#: fs/partitioning_wizard.pm:180
+#: fs/partitioning_wizard.pm:194
 #, c-format
 msgid "Partitionning"
 msgstr "分割磁區"
 
-#: fs/partitioning_wizard.pm:180
+#: fs/partitioning_wizard.pm:194
 #, c-format
 msgid "Which size do you want to keep for Microsoft Windows® on partition %s?"
 msgstr "您要保留多少空間給 Microsoft Windows® 使用 分割區 %s?"
 
-#: fs/partitioning_wizard.pm:181
+#: fs/partitioning_wizard.pm:195
 #, c-format
 msgid "Size"
 msgstr "大小"
 
-#: fs/partitioning_wizard.pm:191
+#: fs/partitioning_wizard.pm:204
 #, c-format
 msgid "Resizing Microsoft Windows® partition"
 msgstr "正在重新調整 Microsoft Windows® 分割區大小"
 
-#: fs/partitioning_wizard.pm:196
+#: fs/partitioning_wizard.pm:209
 #, c-format
 msgid "FAT resizing failed: %s"
 msgstr "FAT 重新調整大小失敗： %s"
 
-#: fs/partitioning_wizard.pm:199
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Microsoft Windows®"
-msgstr ""
-"為確保重新調整分割區大小後的資料正確性，當您下次從 Windows(TM)\n"
-"開機時便會執行檔案系統檢查。"
-
-#: fs/partitioning_wizard.pm:212
+#: fs/partitioning_wizard.pm:225
 #, c-format
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)"
 
-#: fs/partitioning_wizard.pm:217
+#: fs/partitioning_wizard.pm:230
 #, c-format
 msgid "Remove Microsoft Windows®"
 msgstr "移除 Microsoft Windows®"
 
-#: fs/partitioning_wizard.pm:217
+#: fs/partitioning_wizard.pm:230
 #, c-format
 msgid "Erase and use entire disk"
 msgstr "清除並使用整個磁碟"
 
-#: fs/partitioning_wizard.pm:221
+#: fs/partitioning_wizard.pm:234
 #, c-format
 msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr "您有多個硬碟，您打算用那一個來安裝 linux？"
 
-#: fs/partitioning_wizard.pm:229 fsedit.pm:600
+#: fs/partitioning_wizard.pm:242 fsedit.pm:600
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失"
 
-#: fs/partitioning_wizard.pm:239
+#: fs/partitioning_wizard.pm:252
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自訂磁碟分割"
 
-#: fs/partitioning_wizard.pm:245
+#: fs/partitioning_wizard.pm:258
 #, c-format
 msgid "Use fdisk"
 msgstr "使用 fdisk"
 
-#: fs/partitioning_wizard.pm:248
+#: fs/partitioning_wizard.pm:261
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -2690,22 +2687,27 @@ msgstr ""
 "您現在可以對 %s 分割區進行劃分動作.\n"
 "當您完成時, 別忘了使用 'w' 儲存"
 
-#: fs/partitioning_wizard.pm:388 fs/partitioning_wizard.pm:518
+#: fs/partitioning_wizard.pm:401
+#, fuzzy, c-format
+msgid "Ext2/3/4"
+msgstr "Ext3"
+
+#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:568
 #, c-format
 msgid "I can not find any room for installing"
 msgstr "找不到任何可用的安裝空間"
 
-#: fs/partitioning_wizard.pm:397 fs/partitioning_wizard.pm:525
+#: fs/partitioning_wizard.pm:440 fs/partitioning_wizard.pm:575
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分割精靈找到了下列方案："
 
-#: fs/partitioning_wizard.pm:459
+#: fs/partitioning_wizard.pm:509
 #, c-format
 msgid "Here is the content of your disk drive "
 msgstr ""
 
-#: fs/partitioning_wizard.pm:535
+#: fs/partitioning_wizard.pm:585
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "硬碟分割失敗：%s"
@@ -3339,7 +3341,7 @@ msgstr "調頻類型："
 
 #: interactive.pm:128 interactive.pm:549 interactive/curses.pm:263
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39
-#: interactive/stdio.pm:148 interactive/stdio.pm:149 mygtk2.pm:846
+#: interactive/stdio.pm:148 interactive/stdio.pm:149 mygtk2.pm:847
 #: ugtk2.pm:421 ugtk2.pm:519 ugtk2.pm:812 ugtk2.pm:835
 #, c-format
 msgid "Ok"
@@ -4676,27 +4678,27 @@ msgstr "尚比亞"
 msgid "Zimbabwe"
 msgstr "辛巴威"
 
-#: lang.pm:1223
+#: lang.pm:1206
 #, c-format
 msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
 
-#: lvm.pm:84
+#: lvm.pm:86
 #, c-format
 msgid "Moving used physical extents to other physical volumes failed"
 msgstr ""
 
-#: lvm.pm:141
+#: lvm.pm:143
 #, c-format
 msgid "Physical volume %s is still in use"
 msgstr ""
 
-#: lvm.pm:151
+#: lvm.pm:153
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "先移除邏輯 volume\n"
 
-#: lvm.pm:184
+#: lvm.pm:186
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr "開機載入器無法處理位於多個實體磁區的 /boot"
@@ -5106,17 +5108,17 @@ msgstr ""
 "載入 %s 模組失敗.\n"
 "您要用其他參數再試一次嗎?"
 
-#: mygtk2.pm:1540 mygtk2.pm:1541
+#: mygtk2.pm:1541 mygtk2.pm:1542
 #, c-format
 msgid "Password is trivial to guess"
 msgstr ""
 
-#: mygtk2.pm:1542
+#: mygtk2.pm:1543
 #, c-format
 msgid "Password should resist to basic attacks"
 msgstr ""
 
-#: mygtk2.pm:1543 mygtk2.pm:1544
+#: mygtk2.pm:1544 mygtk2.pm:1545
 #, fuzzy, c-format
 msgid "Password seems secure"
 msgstr "密碼基礎"
@@ -6422,7 +6424,7 @@ msgid ""
 "default mode: offer to configure autologin feature"
 msgstr ""
 
-#: standalone.pm:61
+#: standalone.pm:60
 #, c-format
 msgid ""
 "[OPTIONS] [PROGRAM_NAME]\n"
@@ -6433,7 +6435,7 @@ msgid ""
 "  --incident        - program should be one of Mandriva Linux tools"
 msgstr ""
 
-#: standalone.pm:67
+#: standalone.pm:66
 #, c-format
 msgid ""
 "[--add]\n"
@@ -6444,7 +6446,7 @@ msgid ""
 "  --wizard          - like --add"
 msgstr ""
 
-#: standalone.pm:73
+#: standalone.pm:72
 #, c-format
 msgid ""
 "\n"
@@ -6462,7 +6464,7 @@ msgid ""
 "                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: standalone.pm:88
+#: standalone.pm:87
 #, c-format
 msgid ""
 "[OPTIONS]...\n"
@@ -6480,17 +6482,17 @@ msgid ""
 "IP, nbi image name)"
 msgstr ""
 
-#: standalone.pm:100
+#: standalone.pm:99
 #, c-format
 msgid "[keyboard]"
 msgstr "[鍵盤]"
 
-#: standalone.pm:101
+#: standalone.pm:100
 #, c-format
 msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: standalone.pm:102
+#: standalone.pm:101
 #, c-format
 msgid ""
 "[OPTIONS]\n"
@@ -6504,7 +6506,7 @@ msgid ""
 "--quiet : do not be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: standalone.pm:112
+#: standalone.pm:111
 #, c-format
 msgid ""
 "[OPTION]...\n"
@@ -6516,14 +6518,14 @@ msgid ""
 "  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 msgstr ""
 
-#: standalone.pm:117
+#: standalone.pm:116
 #, c-format
 msgid ""
 "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
 "usbtable] [--dynamic=dev]"
 msgstr ""
 
-#: standalone.pm:118
+#: standalone.pm:117
 #, c-format
 msgid ""
 " [everything]\n"
@@ -6531,7 +6533,7 @@ msgid ""
 "       XFdrake resolution"
 msgstr ""
 
-#: standalone.pm:154
+#: standalone.pm:153
 #, c-format
 msgid ""
 "\n"
@@ -6618,6 +6620,13 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安裝失敗"
 
+#~ msgid ""
+#~ "To ensure data integrity after resizing the partition(s), \n"
+#~ "filesystem checks will be run on your next boot into Microsoft Windows®"
+#~ msgstr ""
+#~ "為確保重新調整分割區大小後的資料正確性，當您下次從 Windows(TM)\n"
+#~ "開機時便會執行檔案系統檢查。"
+
 #~ msgid "Use the Microsoft Windows® partition for loopback"
 #~ msgstr "使用 Microsoft Windows® 分割區作為 loopback"