Updated POT file.

1 files changed, 407 insertions, 408 deletions

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index a94a78b34..06b783ced 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,8 +7,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX 2006\n"
-"POT-Creation-Date: 2005-11-18 16:24+0100\n"
-"PO-Revision-Date: 2005-11-24 21:43+0800\n"
+"POT-Creation-Date: 2005-11-30 17:38+0800\n"
+"PO-Revision-Date: 2005-11-30 17:44+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
 "MIME-Version: 1.0\n"
@@ -71,7 +71,7 @@ msgstr ""
 "请单击按钮重新启动计算机, 拔出该密钥盘之后, 去掉写保护后再插入, \n"
 "然后再次调用 Mandriva Move。"
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1334
 #, c-format
 msgid "Reboot"
 msgstr "重新启动"
@@ -163,17 +163,17 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
 #: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1776
-#: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
+#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:833 network/netconnect.pm:862
-#: network/netconnect.pm:962 network/netconnect.pm:966
-#: network/netconnect.pm:970 network/netconnect.pm:975
-#: network/netconnect.pm:1120 network/netconnect.pm:1124
-#: network/netconnect.pm:1243 network/netconnect.pm:1248
-#: network/netconnect.pm:1268 network/netconnect.pm:1427
+#: network/netconnect.pm:838 network/netconnect.pm:867
+#: network/netconnect.pm:967 network/netconnect.pm:971
+#: network/netconnect.pm:975 network/netconnect.pm:980
+#: network/netconnect.pm:1125 network/netconnect.pm:1129
+#: network/netconnect.pm:1248 network/netconnect.pm:1253
+#: network/netconnect.pm:1273 network/netconnect.pm:1432
 #: network/thirdparty.pm:319 network/thirdparty.pm:326
 #: network/thirdparty.pm:370 network/thirdparty.pm:372
 #: network/thirdparty.pm:393 network/thirdparty.pm:417
@@ -215,7 +215,7 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: standalone/drakbackup:4435 standalone/drakclock:124
 #: standalone/drakconnect:676 standalone/drakconnect:680
 #: standalone/drakconnect:685 standalone/drakconnect:700
-#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
+#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
@@ -231,7 +231,7 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: standalone/draksambashare:1192 standalone/draksambashare:1212
 #: standalone/draksambashare:1220 standalone/draksambashare:1232
 #: standalone/draksplash:162 standalone/drakxtv:107
-#: standalone/finish-install:49 standalone/logdrake:171
+#: standalone/finish-install:66 standalone/logdrake:171
 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
 #: standalone/scannerdrake:715 standalone/scannerdrake:726
@@ -467,13 +467,13 @@ msgstr ""
 "使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。\n"
 "注意这是试验阶段的支持, 它可能会使您的电脑失去反应。"
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975
 #, c-format
 msgid "Custom"
 msgstr "自定义"
 
 #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
+#: install_steps_interactive.pm:86 install_steps_interactive.pm:1334
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
 #: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
@@ -505,8 +505,8 @@ msgstr "测试"
 
 #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
-#: printer/printerdrake.pm:1112 standalone/drakfont:494
-#: standalone/drakfont:556
+#: printer/printerdrake.pm:1112 standalone/drakfont:493
+#: standalone/drakfont:555
 #, c-format
 msgid "Options"
 msgstr "选项"
@@ -642,7 +642,7 @@ msgstr "显示卡: %s"
 #: standalone/drakbackup:4155 standalone/drakbackup:4199
 #: standalone/drakbackup:4453 standalone/drakconnect:158
 #: standalone/drakconnect:852 standalone/drakconnect:939
-#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
+#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
 #: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
 #: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
 #, c-format
@@ -650,8 +650,8 @@ msgid "Ok"
 msgstr "确定"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
-#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
+#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431
+#: install_steps_interactive.pm:842 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
 #: printer/printerdrake.pm:3859 standalone/drakautoinst:215
@@ -659,7 +659,7 @@ msgstr "确定"
 #: standalone/drakbackup:4028 standalone/drakbackup:4083
 #: standalone/drakbackup:4453 standalone/drakconnect:157
 #: standalone/drakconnect:937 standalone/drakconnect:1029
-#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
+#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
 #: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
 #: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
 #: ugtk2.pm:899
@@ -672,7 +672,7 @@ msgstr "取消"
 #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
 #: standalone/drakbackup:4020 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
-#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
+#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
 #: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
 #: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
 #, c-format
@@ -1331,55 +1331,55 @@ msgstr "默认使用 Unicode"
 msgid "All languages"
 msgstr "全部语言"
 
-#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
+#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:963
 #, c-format
 msgid "Country / Region"
 msgstr "国家/地区"
 
-#: any.pm:842
+#: any.pm:844
 #, c-format
 msgid "Please choose your country."
 msgstr "请选择您的国家/地区。"
 
-#: any.pm:844
+#: any.pm:846
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "在此列出了可用的全部国家/地区"
 
-#: any.pm:845
+#: any.pm:847
 #, c-format
 msgid "Other Countries"
 msgstr "其它国家"
 
-#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
 #: interactive.pm:397
 #, c-format
 msgid "Advanced"
 msgstr "高级"
 
-#: any.pm:853
+#: any.pm:855
 #, c-format
 msgid "Input method:"
 msgstr "输入法:"
 
-#: any.pm:856 install_any.pm:422 network/netconnect.pm:318
-#: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7
+#: any.pm:858 install_any.pm:422 network/netconnect.pm:318
+#: network/netconnect.pm:323 network/netconnect.pm:1239 network/wireless.pm:7
 #: printer/printerdrake.pm:105
 #, c-format
 msgid "None"
 msgstr "无"
 
-#: any.pm:973
+#: any.pm:975
 #, c-format
 msgid "No sharing"
 msgstr "禁止共享"
 
-#: any.pm:973
+#: any.pm:975
 #, c-format
 msgid "Allow all users"
 msgstr "允许所有用户使用"
 
-#: any.pm:977
+#: any.pm:979
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -1392,35 +1392,35 @@ msgstr ""
 "选择允许, 用户将只需在 Konqueror 和 Nautilus 中单击“共享”即可开放共享。\n"
 "“自定义”允许按照不同用户细分设置。\n"
 
-#: any.pm:989
+#: any.pm:991
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS: 传统的 Unix 文件共享系统, Mac 和 Windows 上支持较少。"
 
-#: any.pm:992
+#: any.pm:994
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB: Windows、MacOS X 和其它现代 Linux 系统所用的文件共享系统。"
 
-#: any.pm:1000
+#: any.pm:1002
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您可以使用 NFS 或 Samba 导出。请选择您想要使用的协议。"
 
-#: any.pm:1025
+#: any.pm:1027
 #, c-format
 msgid "Launch userdrake"
 msgstr "运行“Drak 用户管理”"
 
-#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
+#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
 #: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
 #: printer/printerdrake.pm:5305 standalone/drakTermServ:294
-#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
+#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499
 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
 #: standalone/printerdrake:583
@@ -1428,7 +1428,7 @@ msgstr "运行“Drak 用户管理”"
 msgid "Close"
 msgstr "关闭"
 
-#: any.pm:1027
+#: any.pm:1029
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -2075,6 +2075,13 @@ msgstr "挂载点: "
 msgid "Options: %s"
 msgstr "选项: %s"
 
+#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292
+#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62
+#: install_steps_interactive.pm:342
+#, c-format
+msgid "Partitionning"
+msgstr "分区"
+
 #: diskdrake/hd_gtk.pm:92
 #, c-format
 msgid "Please make a backup of your data first"
@@ -2247,7 +2254,7 @@ msgstr "退出而不保存分区表吗?"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要保存 /etc/fstab 修改吗?"
 
-#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
+#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "对分区表的更改要等到重新启动后才能生效"
@@ -2898,7 +2905,7 @@ msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
 msgid "The encryption keys do not match"
 msgstr "两次加密密钥不符"
 
-#: diskdrake/interactive.pm:1338 network/netconnect.pm:1070
+#: diskdrake/interactive.pm:1338 network/netconnect.pm:1075
 #: standalone/drakconnect:419 standalone/drakroam:120
 #, c-format
 msgid "Encryption key"
@@ -2944,7 +2951,7 @@ msgstr "另一个"
 #, c-format
 msgid ""
 "Please enter your username, password and domain name to access this host."
-msgstr "要访问此主机, 请输入您的用户名, 密码和域名"
+msgstr "要访问此主机, 请输入您的用户名、密码和域名"
 
 #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
 #, c-format
@@ -2976,7 +2983,7 @@ msgstr "无法安装 %s 软件包!"
 msgid "Mandatory package %s is missing"
 msgstr "无法找到必需的软件包 %s"
 
-#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317
+#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1319
 #: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
 #: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
@@ -3125,29 +3132,20 @@ msgstr "所有到文件系统的输入/输出都应该是同步完成的。"
 
 #: fs/mount_options.pm:138
 #, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"允许普通用户装载文件系统。装载用户的用户名将写入 mtab, 这样他就可以稍候\n"
-"再次拆卸文件系统。此选项意味着选项 noexec, nosuid 以及 nodev(除非在选项\n"
-"行中用单独的选项 user, exec, dev, suid 加以覆盖)。"
+msgid "Allow an ordinary user to mount the file system."
+msgstr "允许普通用户挂载文件系统。"
 
-#: fs/mount_options.pm:144
+#: fs/mount_options.pm:140
 #, c-format
 msgid "Enable user disk quota accounting, and optionally enforce limits"
 msgstr "启用用户磁盘配额记账及可选强制限制"
 
-#: fs/mount_options.pm:146
+#: fs/mount_options.pm:142
 #, c-format
 msgid "Give write access to ordinary users"
 msgstr "给普通用户以写权限"
 
-#: fs/mount_options.pm:148
+#: fs/mount_options.pm:144
 #, c-format
 msgid "Give read-only access to ordinary users"
 msgstr "给普通用户以只读权限"
@@ -3262,7 +3260,7 @@ msgstr "没有足够的空闲空间供自动分配"
 msgid "Nothing to do"
 msgstr "不做任何事"
 
-#: harddrake/data.pm:62 install_any.pm:1711
+#: harddrake/data.pm:62 install_any.pm:1710
 #, c-format
 msgid "Floppy"
 msgstr "软盘"
@@ -3272,12 +3270,12 @@ msgstr "软盘"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88 install_any.pm:1712
+#: harddrake/data.pm:88 install_any.pm:1711
 #, c-format
 msgid "Hard Disk"
 msgstr "硬盘"
 
-#: harddrake/data.pm:97 install_any.pm:1713
+#: harddrake/data.pm:97 install_any.pm:1712
 #, c-format
 msgid "CDROM"
 msgstr "CDROM"
@@ -3388,7 +3386,7 @@ msgid "AGP controllers"
 msgstr "AGP 控制器"
 
 #: harddrake/data.pm:324 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:993
+#: install_steps_interactive.pm:995
 #, c-format
 msgid "Printer"
 msgstr "打印机"
@@ -3455,7 +3453,8 @@ msgid "Bridges and system controllers"
 msgstr "桥接和系统控制器"
 
 #: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
-#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
+#: install_steps_interactive.pm:955 standalone/finish-install:37
+#: standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "键盘"
@@ -3465,7 +3464,7 @@ msgstr "键盘"
 msgid "Tablet and touchscreen"
 msgstr "手写板和触摸屏"
 
-#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
+#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:988
 #, c-format
 msgid "Mouse"
 msgstr "鼠标"
@@ -3496,24 +3495,24 @@ msgstr "CPU # "
 msgid "Please Wait... Applying the configuration"
 msgstr "请稍候...正在应用配置"
 
-#: harddrake/sound.pm:228
+#: harddrake/sound.pm:229
 #, c-format
 msgid "No alternative driver"
 msgstr "没有替代的驱动程序"
 
-#: harddrake/sound.pm:229
+#: harddrake/sound.pm:230
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
 "currently uses \"%s\""
 msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡(%s)上, 现正使用“%s”"
 
-#: harddrake/sound.pm:235
+#: harddrake/sound.pm:236
 #, c-format
 msgid "Sound configuration"
 msgstr "声音配置"
 
-#: harddrake/sound.pm:237
+#: harddrake/sound.pm:238
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
@@ -3524,7 +3523,7 @@ msgstr ""
 #. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:242
+#: harddrake/sound.pm:243
 #, c-format
 msgid ""
 "\n"
@@ -3536,7 +3535,7 @@ msgstr ""
 "\n"
 "您的声卡现在正在使用 %s“%s”驱动程序(其默认驱动程序为“%s”)"
 
-#: harddrake/sound.pm:244
+#: harddrake/sound.pm:245
 #, c-format
 msgid ""
 "OSS (Open Sound System) was the first sound API. It's an OS independent "
@@ -3568,17 +3567,17 @@ msgstr ""
 "- 与旧的 OSS 兼容的 API\n"
 "- 新的 ALSA API 带来许多增强特性, 但这需要使用 ALSA 库。\n"
 
-#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146
+#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146
 #, c-format
 msgid "Driver:"
 msgstr "驱动程序: "
 
-#: harddrake/sound.pm:266
+#: harddrake/sound.pm:267
 #, c-format
 msgid "Trouble shooting"
 msgstr "疑难解答"
 
-#: harddrake/sound.pm:274
+#: harddrake/sound.pm:275
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -3593,12 +3592,12 @@ msgstr ""
 "\n"
 "新的“%s”驱动程序仅会在下此启动时使用。"
 
-#: harddrake/sound.pm:282
+#: harddrake/sound.pm:283
 #, c-format
 msgid "No open source driver"
 msgstr "没有开放源代码的驱动程序"
 
-#: harddrake/sound.pm:283
+#: harddrake/sound.pm:284
 #, c-format
 msgid ""
 "There's no free driver for your sound card (%s), but there's a proprietary "
@@ -3607,33 +3606,33 @@ msgstr ""
 "没有已知的 OSS/ALSA 替代驱动程序可以用在您的(%s)声卡上, 不过在“%s”有一个专有"
 "的驱动程序。"
 
-#: harddrake/sound.pm:286
+#: harddrake/sound.pm:287
 #, c-format
 msgid "No known driver"
 msgstr "没有已知驱动程序"
 
-#: harddrake/sound.pm:287
+#: harddrake/sound.pm:288
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "没有已知的驱动程序可以用在您的声卡(%s)上"
 
-#: harddrake/sound.pm:291 network/netconnect.pm:98 network/netconnect.pm:833
+#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838
 #, c-format
 msgid "Unknown driver"
 msgstr "未知的驱动程序"
 
-#: harddrake/sound.pm:292
+#: harddrake/sound.pm:293
 #, c-format
 msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr "错误: 您的“%s”声卡驱动程序未被列出"
 
-#: harddrake/sound.pm:306
+#: harddrake/sound.pm:307
 #, c-format
 msgid "Sound trouble shooting"
 msgstr "声音疑难解决"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:309
+#: harddrake/sound.pm:310
 #, c-format
 msgid ""
 "The classic bug sound tester is to run the following commands:\n"
@@ -3672,18 +3671,18 @@ msgstr ""
 "\n"
 "- “/sbin/fuser -v /dev/dsp”将会告诉您哪个程序使用声卡。\n"
 
-#: harddrake/sound.pm:335
+#: harddrake/sound.pm:336
 #, c-format
 msgid "Let me pick any driver"
 msgstr "让我挑选任意驱动"
 
-#: harddrake/sound.pm:338
+#: harddrake/sound.pm:339
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "选择其它驱动"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:341
+#: harddrake/sound.pm:342
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3778,7 +3777,7 @@ msgstr ""
 "新启动您的计算机。"
 
 #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:738 standalone/drakautoinst:214
+#: install_steps_interactive.pm:740 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
@@ -4070,7 +4069,7 @@ msgstr "开发"
 msgid "Graphical Environment"
 msgstr "图形环境"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
+#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648
 #, c-format
 msgid "Individual package selection"
 msgstr "选择单个软件包"
@@ -4080,7 +4079,7 @@ msgstr "选择单个软件包"
 msgid "Upgrade"
 msgstr "升级"
 
-#: help.pm:146 install_steps_interactive.pm:604
+#: help.pm:146 install_steps_interactive.pm:606
 #, c-format
 msgid "With X"
 msgstr "安装 X"
@@ -4159,14 +4158,14 @@ msgstr ""
 "多台计算机, 此选项可能非常有用。单击此图标后, 您需要插入另外一次安装结束后创"
 "建的那张软盘。参看最后一步的第二条提示, 其中描述了如何创建这样的软盘。"
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
 #: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2613
 #: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
@@ -4263,7 +4262,7 @@ msgstr ""
 "Internet。最好选择地理位置离您较近的时间服务器。此选项还会自动安装时间服务"
 "器, 这样您局域网中的其它计算机都能够进行自动校时了。"
 
-#: help.pm:217 install_steps_interactive.pm:888
+#: help.pm:217 install_steps_interactive.pm:890
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "您的系统时钟设定为 GMT"
@@ -4603,7 +4602,7 @@ msgstr "清除整个磁盘"
 msgid "Remove Windows"
 msgstr "删除 Windows"
 
-#: help.pm:374 install_interactive.pm:228
+#: help.pm:374 install_interactive.pm:232
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自定义磁盘分区"
@@ -4678,17 +4677,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "生成自动安装软盘"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409 install_steps_interactive.pm:1345
 #, c-format
 msgid "Replay"
 msgstr "重现"
 
-#: help.pm:409 install_steps_interactive.pm:1343
+#: help.pm:409 install_steps_interactive.pm:1345
 #, c-format
 msgid "Automated"
 msgstr "自动"
 
-#: help.pm:409 install_steps_interactive.pm:1346
+#: help.pm:409 install_steps_interactive.pm:1348
 #, c-format
 msgid "Save packages selection"
 msgstr "保存软件包选择"
@@ -5492,8 +5491,8 @@ msgstr ""
 "\"%s\"：如果在您的系统中检测到了声卡, 则会在此处显示。如果您发现在此显示的声"
 "卡与您系统中实际安装的声卡并不相同, 您可以单击该按钮选择不同的驱动程序。"
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
-#: install_steps_interactive.pm:1037
+#: help.pm:788 help.pm:855 install_steps_interactive.pm:1022
+#: install_steps_interactive.pm:1039
 #, c-format
 msgid "Sound card"
 msgstr "声卡"
@@ -5624,13 +5623,13 @@ msgstr ""
 " * \"%s\"：在此您可以精确调整要在您的计算机上运行哪些服务。如果您要将此计算机"
 "用作服务器, 那么应该复查这一设置。"
 
-#: help.pm:855 install_steps_interactive.pm:884
-#: install_steps_interactive.pm:979 standalone/drakclock:100
+#: help.pm:855 install_steps_interactive.pm:886
+#: install_steps_interactive.pm:981 standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "时区"
 
-#: help.pm:855 install_steps_interactive.pm:1053
+#: help.pm:855 install_steps_interactive.pm:1055
 #, c-format
 msgid "TV card"
 msgstr "电视卡"
@@ -5645,33 +5644,33 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "图形界面"
 
-#: help.pm:855 install_any.pm:1734 install_steps_interactive.pm:1071
+#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1073
 #: standalone/drakbackup:2040
 #, c-format
 msgid "Network"
 msgstr "网络"
 
-#: help.pm:855 install_steps_interactive.pm:1083
+#: help.pm:855 install_steps_interactive.pm:1085
 #, c-format
 msgid "Proxies"
 msgstr "代理服务器"
 
-#: help.pm:855 install_steps_interactive.pm:1094
+#: help.pm:855 install_steps_interactive.pm:1096
 #, c-format
 msgid "Security Level"
 msgstr "安全级别"
 
-#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
+#: help.pm:855 install_steps_interactive.pm:1110 network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "防火墙"
 
-#: help.pm:855 install_steps_interactive.pm:1124
+#: help.pm:855 install_steps_interactive.pm:1126
 #, c-format
 msgid "Bootloader"
 msgstr "引导程序"
 
-#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
+#: help.pm:855 install_steps_interactive.pm:1139 services.pm:114
 #: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
@@ -5775,7 +5774,7 @@ msgstr "网络 (NFS)"
 msgid "Insert the CD 1 again"
 msgstr "再次插入第一张光盘"
 
-#: install_any.pm:478 network/netconnect.pm:862 standalone/drakbackup:114
+#: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114
 #, c-format
 msgid "No device found"
 msgstr "没有发现设备"
@@ -5854,7 +5853,7 @@ msgid "Copying in progress"
 msgstr "复制进行中"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:936
+#: install_any.pm:935
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -5877,7 +5876,7 @@ msgstr ""
 "您真要安装这些服务器吗?\n"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:959
+#: install_any.pm:958
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -5890,22 +5889,22 @@ msgstr ""
 "\n"
 "您确定要删除这些软件包吗?\n"
 
-#: install_any.pm:1395 partition_table.pm:597
+#: install_any.pm:1394 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "请取文件 %s 出错"
 
-#: install_any.pm:1629
+#: install_any.pm:1628
 #, c-format
 msgid "The following disk(s) were renamed:"
 msgstr "下列盘片已重命名:"
 
-#: install_any.pm:1631
+#: install_any.pm:1630
 #, c-format
 msgid "%s (previously named as %s)"
 msgstr "%s(以前的名称为 %s)"
 
-#: install_any.pm:1671
+#: install_any.pm:1670
 #, c-format
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
@@ -5913,52 +5912,52 @@ msgid ""
 msgstr ""
 "发生错误！新建文件系统时找不到可用的设备。请检查您的硬件以确定问题的原因"
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "HTTP"
 msgstr "HTTP"
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "FTP"
 msgstr "FTP"
 
-#: install_any.pm:1715
+#: install_any.pm:1714
 #, c-format
 msgid "NFS"
 msgstr "NFS"
 
-#: install_any.pm:1738
+#: install_any.pm:1737
 #, c-format
 msgid "Please choose a media"
 msgstr "请选择介质"
 
-#: install_any.pm:1754
+#: install_any.pm:1753
 #, c-format
 msgid "File already exists. Overwrite it?"
 msgstr "文件已经存在。覆盖吗?"
 
-#: install_any.pm:1758
+#: install_any.pm:1757
 #, c-format
 msgid "Permission denied"
 msgstr "没有权限"
 
-#: install_any.pm:1807
+#: install_any.pm:1806
 #, c-format
 msgid "Bad NFS name"
 msgstr "无效的 NFS 名称"
 
-#: install_any.pm:1828
+#: install_any.pm:1827
 #, c-format
 msgid "Bad media %s"
 msgstr "无效的介质 %s"
 
-#: install_any.pm:1878
+#: install_any.pm:1877
 #, c-format
 msgid "Can not make screenshots before partitioning"
 msgstr "无法在分区完成之前进行屏幕捕捉"
 
-#: install_any.pm:1885
+#: install_any.pm:1884
 #, c-format
 msgid "Screenshots will be available after install in %s"
 msgstr "安装完成后, 所有的屏幕抓图都会保存到 %s 之中"
@@ -6146,17 +6145,24 @@ msgstr "清除并使用整个磁盘"
 msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr "您有不只一个硬盘, 您要在哪个上面安装 Linux?"
 
-#: install_interactive.pm:219
+#: install_interactive.pm:216 install_interactive.pm:222
+#: install_interactive.pm:275 install_interactive.pm:280
+#: install_steps_interactive.pm:278 steps.pm:21
+#, c-format
+msgid "Partitioning"
+msgstr "分区"
+
+#: install_interactive.pm:221
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr "磁盘 %s 上现存的所有分区及其资料将被清除"
 
-#: install_interactive.pm:232
+#: install_interactive.pm:236
 #, c-format
 msgid "Use fdisk"
 msgstr "使用 fdisk"
 
-#: install_interactive.pm:235
+#: install_interactive.pm:239
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -6165,27 +6171,27 @@ msgstr ""
 "您现在可以在 %s 上分区。\n"
 "做完之后, 不要忘记用“w”命令保存您的修改"
 
-#: install_interactive.pm:271
+#: install_interactive.pm:275
 #, c-format
 msgid "I can not find any room for installing"
 msgstr "我无法找到安装需要的空间"
 
-#: install_interactive.pm:275
+#: install_interactive.pm:279
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分区向导找到下列解决办法:"
 
-#: install_interactive.pm:281
+#: install_interactive.pm:287
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "分区失败: %s"
 
-#: install_interactive.pm:288
+#: install_interactive.pm:294
 #, c-format
 msgid "Bringing up the network"
 msgstr "正在启动网络"
 
-#: install_interactive.pm:293
+#: install_interactive.pm:299
 #, c-format
 msgid "Bringing down the network"
 msgstr "正在禁用网络"
@@ -6507,12 +6513,12 @@ msgstr ""
 "如果您真的遇到问题的话，可以试试文本安装。要进入文本安装，请在启动时按“F1”，"
 "然后输入“text”。"
 
-#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
+#: install_steps_gtk.pm:211 install_steps_interactive.pm:630
 #, c-format
 msgid "Package Group Selection"
 msgstr "程序组选择"
 
-#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
+#: install_steps_gtk.pm:254 install_steps_interactive.pm:573
 #, c-format
 msgid "Total size: %d / %d MB"
 msgstr "总共大小: %d / %d MB"
@@ -6628,12 +6634,12 @@ msgstr "更新软件包选择"
 msgid "Minimal install"
 msgstr "最小安装"
 
-#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
+#: install_steps_gtk.pm:414 install_steps_interactive.pm:492
 #, c-format
 msgid "Choose the packages you want to install"
 msgstr "选择您想要安装的软件包"
 
-#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
+#: install_steps_gtk.pm:431 install_steps_interactive.pm:716
 #, c-format
 msgid "Installing"
 msgstr "正在安装"
@@ -6659,12 +6665,12 @@ msgid "%d packages"
 msgstr "%d 个软件包"
 
 #: install_steps_gtk.pm:539 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:738
+#: install_steps_interactive.pm:740
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
+#: install_steps_gtk.pm:543 install_steps_interactive.pm:744
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -6677,29 +6683,29 @@ msgstr ""
 "请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。\n"
 "如果您没有这张光盘, 请单击“取消”, 放弃安装这张光盘上的软件。"
 
-#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:556 install_steps_interactive.pm:755
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "排列软件包时出错: "
 
-#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
+#: install_steps_gtk.pm:558 install_steps_interactive.pm:759
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "安装软件包时出错: "
 
-#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
-#: install_steps_interactive.pm:757
+#: install_steps_gtk.pm:560 install_steps_interactive.pm:755
+#: install_steps_interactive.pm:759
 #, c-format
 msgid "Go on anyway?"
 msgstr "真的要继续?"
 
-#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
+#: install_steps_gtk.pm:582 install_steps_interactive.pm:941 steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "概要"
 
-#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
-#: install_steps_interactive.pm:1084
+#: install_steps_gtk.pm:605 install_steps_interactive.pm:937
+#: install_steps_interactive.pm:1086
 #, c-format
 msgid "not configured"
 msgstr "未配置"
@@ -6840,7 +6846,7 @@ msgstr "正在扫描各个分区以查找挂载点"
 msgid "Choose the mount points"
 msgstr "选择挂载点"
 
-#: install_steps_interactive.pm:323
+#: install_steps_interactive.pm:325
 #, c-format
 msgid ""
 "No free space for 1MB bootstrap! Install will continue, but to boot your "
@@ -6849,7 +6855,7 @@ msgstr ""
 "无法创建启动空间(1MB)！安装将继续, 但如需启动系统, 您可用“Drak 磁盘管理”创建"
 "启动分区"
 
-#: install_steps_interactive.pm:328
+#: install_steps_interactive.pm:330
 #, c-format
 msgid ""
 "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
@@ -6859,51 +6865,51 @@ msgstr ""
 "您需要创建一个 PPC PReP 启动空间！安装将继续, 但如需启动系统, 您可用“Drak 磁"
 "盘管理”创建启动分区"
 
-#: install_steps_interactive.pm:364
+#: install_steps_interactive.pm:366
 #, c-format
 msgid "Choose the partitions you want to format"
 msgstr "选择您要格式化的分区"
 
-#: install_steps_interactive.pm:366
+#: install_steps_interactive.pm:368
 #, c-format
 msgid "Check bad blocks?"
 msgstr "是否检查坏磁块?"
 
-#: install_steps_interactive.pm:394
+#: install_steps_interactive.pm:396
 #, c-format
 msgid ""
 "Failed to check filesystem %s. Do you want to repair the errors? (beware, "
 "you can lose data)"
 msgstr "检查文件系统 %s 失败。您想修复错误吗?(注意, 有可能丢失数据)"
 
-#: install_steps_interactive.pm:397
+#: install_steps_interactive.pm:399
 #, c-format
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
 
-#: install_steps_interactive.pm:406
+#: install_steps_interactive.pm:408
 #, c-format
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "正在寻找可安装的程序并重建 rpm 数据库..."
 
-#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
+#: install_steps_interactive.pm:409 install_steps_interactive.pm:461
 #, c-format
 msgid "Looking for available packages..."
 msgstr "正在寻找可安装的程序..."
 
-#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
+#: install_steps_interactive.pm:430 install_steps_interactive.pm:841
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr "选择一个镜像网站来取得软件包"
 
-#: install_steps_interactive.pm:468
+#: install_steps_interactive.pm:470
 #, c-format
 msgid ""
 "Your system does not have enough space left for installation or upgrade (%d "
 "> %d)"
 msgstr "您的系统所剩余的空间不够进行安装或升级(%d > %d)"
 
-#: install_steps_interactive.pm:502
+#: install_steps_interactive.pm:504
 #, c-format
 msgid ""
 "Please choose load or save package selection.\n"
@@ -6912,55 +6918,55 @@ msgstr ""
 "请选择装入或保存软件包选择息。\n"
 "格式与自动安装生成的文件一样。"
 
-#: install_steps_interactive.pm:504
+#: install_steps_interactive.pm:506
 #, c-format
 msgid "Load"
 msgstr "装入"
 
-#: install_steps_interactive.pm:504 standalone/drakbackup:4055
+#: install_steps_interactive.pm:506 standalone/drakbackup:4055
 #: standalone/drakbackup:4125 standalone/logdrake:175
 #, c-format
 msgid "Save"
 msgstr "保存"
 
-#: install_steps_interactive.pm:512
+#: install_steps_interactive.pm:514
 #, c-format
 msgid "Bad file"
 msgstr "文件有错"
 
-#: install_steps_interactive.pm:585
+#: install_steps_interactive.pm:587
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "您选择的超过可用空间"
 
-#: install_steps_interactive.pm:600
+#: install_steps_interactive.pm:602
 #, c-format
 msgid "Type of install"
 msgstr "安装类型"
 
-#: install_steps_interactive.pm:601
+#: install_steps_interactive.pm:603
 #, c-format
 msgid ""
 "You have not selected any group of packages.\n"
 "Please choose the minimal installation you want:"
 msgstr "您没有选择任何的组件, 请选择最小安装:"
 
-#: install_steps_interactive.pm:605
+#: install_steps_interactive.pm:607
 #, c-format
 msgid "With basic documentation (recommended!)"
 msgstr "安装基础文档(建议!)"
 
-#: install_steps_interactive.pm:606
+#: install_steps_interactive.pm:608
 #, c-format
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "真正最小安装(注意没有 urpmi 包管理工具)"
 
-#: install_steps_interactive.pm:645 standalone/drakxtv:52
+#: install_steps_interactive.pm:647 standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "全部"
 
-#: install_steps_interactive.pm:684
+#: install_steps_interactive.pm:686
 #, c-format
 msgid ""
 "If you have all the CDs in the list below, click Ok.\n"
@@ -6971,17 +6977,17 @@ msgstr ""
 "如果您没有其中任何一张, 单击“取消”。\n"
 "如果您缺少其中一张, 清除它的选中标记, 然后单击“确认”。"
 
-#: install_steps_interactive.pm:689
+#: install_steps_interactive.pm:691
 #, c-format
 msgid "Cd-Rom labeled \"%s\""
 msgstr "标为 %s 的光盘"
 
-#: install_steps_interactive.pm:714
+#: install_steps_interactive.pm:716
 #, c-format
 msgid "Preparing installation"
 msgstr "正在准备安装"
 
-#: install_steps_interactive.pm:722
+#: install_steps_interactive.pm:724
 #, c-format
 msgid ""
 "Installing package %s\n"
@@ -6990,22 +6996,22 @@ msgstr ""
 "正在安装软件包 %s \n"
 "%d%%"
 
-#: install_steps_interactive.pm:771
+#: install_steps_interactive.pm:773
 #, c-format
 msgid "Post-install configuration"
 msgstr "安装后的配置"
 
-#: install_steps_interactive.pm:778
+#: install_steps_interactive.pm:780
 #, c-format
 msgid "Please ensure the Update Modules media is in drive %s"
 msgstr "请确定更新模块介质位于驱动器 %s"
 
-#: install_steps_interactive.pm:812
+#: install_steps_interactive.pm:814
 #, c-format
 msgid "Updates"
 msgstr "更新"
 
-#: install_steps_interactive.pm:813
+#: install_steps_interactive.pm:815
 #, c-format
 msgid ""
 "You now have the opportunity to download updated packages. These packages\n"
@@ -7024,142 +7030,142 @@ msgstr ""
 "\n"
 "您是否要安装升级包?"
 
-#: install_steps_interactive.pm:834
+#: install_steps_interactive.pm:836
 #, c-format
 msgid ""
 "Contacting Mandriva Linux web site to get the list of available mirrors..."
 msgstr "正在连接 Mandriva Linux 网站获得可用镜像的列表..."
 
-#: install_steps_interactive.pm:853
+#: install_steps_interactive.pm:855
 #, c-format
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr "正在连接镜像网站以取得可供安装的软件包的列表..."
 
-#: install_steps_interactive.pm:857
+#: install_steps_interactive.pm:859
 #, c-format
 msgid "Unable to contact mirror %s"
 msgstr "无法连接镜像 %s"
 
-#: install_steps_interactive.pm:857
+#: install_steps_interactive.pm:859
 #, c-format
 msgid "Would you like to try again?"
 msgstr "您是否想要再试一次?"
 
-#: install_steps_interactive.pm:884 standalone/drakclock:45
+#: install_steps_interactive.pm:886 standalone/drakclock:45
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: install_steps_interactive.pm:889
+#: install_steps_interactive.pm:891
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用 NTP)"
 
-#: install_steps_interactive.pm:897
+#: install_steps_interactive.pm:899
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
-#: install_steps_interactive.pm:1136 services.pm:133
+#: install_steps_interactive.pm:954 install_steps_interactive.pm:962
+#: install_steps_interactive.pm:980 install_steps_interactive.pm:987
+#: install_steps_interactive.pm:1138 services.pm:133
 #: standalone/drakbackup:1585
 #, c-format
 msgid "System"
 msgstr "系统"
 
-#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
-#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
-#: install_steps_interactive.pm:1063
+#: install_steps_interactive.pm:994 install_steps_interactive.pm:1021
+#: install_steps_interactive.pm:1038 install_steps_interactive.pm:1054
+#: install_steps_interactive.pm:1065
 #, c-format
 msgid "Hardware"
 msgstr "硬件"
 
-#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
+#: install_steps_interactive.pm:1000 install_steps_interactive.pm:1009
 #, c-format
 msgid "Remote CUPS server"
 msgstr "远程 CUPS 服务器"
 
-#: install_steps_interactive.pm:998
+#: install_steps_interactive.pm:1000
 #, c-format
 msgid "No printer"
 msgstr "没有打印机"
 
-#: install_steps_interactive.pm:1040
+#: install_steps_interactive.pm:1042
 #, c-format
 msgid "Do you have an ISA sound card?"
 msgstr "您有 ISA 声卡吗?"
 
-#: install_steps_interactive.pm:1042
+#: install_steps_interactive.pm:1044
 #, c-format
 msgid ""
 "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
 "card"
 msgstr "安装之后运行“alsaconf”或“sndconfig”来配置您的声卡"
 
-#: install_steps_interactive.pm:1044
+#: install_steps_interactive.pm:1046
 #, c-format
 msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr "没有检测到声卡。请在安装之后尝试“Drak 硬件配置”。"
 
-#: install_steps_interactive.pm:1064
+#: install_steps_interactive.pm:1066
 #, c-format
 msgid "Graphical interface"
 msgstr "图形界面"
 
-#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
+#: install_steps_interactive.pm:1072 install_steps_interactive.pm:1084
 #, c-format
 msgid "Network & Internet"
 msgstr "网络和 Internet"
 
-#: install_steps_interactive.pm:1084
+#: install_steps_interactive.pm:1086
 #, c-format
 msgid "configured"
 msgstr "已配置"
 
-#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
+#: install_steps_interactive.pm:1095 install_steps_interactive.pm:1109
 #: security/level.pm:55 steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "安全"
 
-#: install_steps_interactive.pm:1112
+#: install_steps_interactive.pm:1114
 #, c-format
 msgid "activated"
 msgstr "已激活"
 
-#: install_steps_interactive.pm:1112
+#: install_steps_interactive.pm:1114
 #, c-format
 msgid "disabled"
 msgstr "已禁用"
 
-#: install_steps_interactive.pm:1123
+#: install_steps_interactive.pm:1125
 #, c-format
 msgid "Boot"
 msgstr "启动"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
+#: install_steps_interactive.pm:1129 printer/printerdrake.pm:961
 #, c-format
 msgid "%s on %s"
 msgstr "位于 %2$s 上的 %1$s"
 
-#: install_steps_interactive.pm:1141 services.pm:175
+#: install_steps_interactive.pm:1143 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "服务: %2$d 项已注册, %1$d 项已激活"
 
-#: install_steps_interactive.pm:1153
+#: install_steps_interactive.pm:1155
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "您还没有配置过 X。您真的想要这样吗?"
 
-#: install_steps_interactive.pm:1234
+#: install_steps_interactive.pm:1236
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "正在准备引导程序..."
 
-#: install_steps_interactive.pm:1244
+#: install_steps_interactive.pm:1246
 #, c-format
 msgid ""
 "You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
@@ -7171,12 +7177,12 @@ msgstr ""
 "续, 不过您需要使用 BootX 或其它方式启动您的机器。根文件系统的内核参数是："
 "root=%s"
 
-#: install_steps_interactive.pm:1250
+#: install_steps_interactive.pm:1252
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 吗?"
 
-#: install_steps_interactive.pm:1253
+#: install_steps_interactive.pm:1255
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -7185,29 +7191,29 @@ msgstr ""
 "安装 aboot 时出错, \n"
 "强迫安装会毁坏第一个分区, 要继续吗?"
 
-#: install_steps_interactive.pm:1270
+#: install_steps_interactive.pm:1272
 #, c-format
 msgid ""
 "In this security level, access to the files in the Windows partition is "
 "restricted to the administrator."
 msgstr "在此安全级别中, 只有管理员才能访问 Windows 分区中的文件。"
 
-#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1301 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "请在驱动器 %s 中插入一张空白软盘"
 
-#: install_steps_interactive.pm:1304
+#: install_steps_interactive.pm:1306
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "请插入另外一张软盘, 作为驱动程序盘"
 
-#: install_steps_interactive.pm:1306
+#: install_steps_interactive.pm:1308
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "正在创建自动安装软盘..."
 
-#: install_steps_interactive.pm:1318
+#: install_steps_interactive.pm:1320
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -7218,19 +7224,19 @@ msgstr ""
 "\n"
 "您真的要现在退出吗?"
 
-#: install_steps_interactive.pm:1328 standalone/draksambashare:422
+#: install_steps_interactive.pm:1330 standalone/draksambashare:422
 #: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
 #: standalone/logdrake:452 standalone/logdrake:458
 #, c-format
 msgid "Congratulations"
 msgstr "恭喜"
 
-#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
+#: install_steps_interactive.pm:1338 install_steps_interactive.pm:1339
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "生成自动安装软盘"
 
-#: install_steps_interactive.pm:1338
+#: install_steps_interactive.pm:1340
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -7263,7 +7269,7 @@ msgid "Choose a file"
 msgstr "选择文件"
 
 #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
-#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
+#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
 #: standalone/draksambashare:1129 standalone/drakups:301
 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
 #: standalone/drakvpn:680
@@ -9866,49 +9872,49 @@ msgstr ""
 msgid "Use Interactive Firewall"
 msgstr "使用交互式防火墙"
 
-#: network/ifw.pm:138
+#: network/ifw.pm:129
 #, c-format
 msgid "Port scanning"
 msgstr "端口扫描"
 
-#: network/ifw.pm:139
+#: network/ifw.pm:130
 #, c-format
 msgid "Service attack"
 msgstr "服务攻击"
 
-#: network/ifw.pm:140
+#: network/ifw.pm:131
 #, c-format
 msgid "Password cracking"
 msgstr "密码破解"
 
-#: network/ifw.pm:141
+#: network/ifw.pm:132
 #, c-format
 msgid "\"%s\" attack"
 msgstr "“%s”攻击"
 
-#: network/ifw.pm:143
+#: network/ifw.pm:134
 #, c-format
 msgid "A port scanning attack has been attempted by %s."
 msgstr "%s 试图进行端口扫描攻击。"
 
-#: network/ifw.pm:144
+#: network/ifw.pm:135
 #, c-format
 msgid "The %s service has been attacked by %s."
 msgstr "%s 服务已被 %s 攻击。"
 
-#: network/ifw.pm:145
+#: network/ifw.pm:136
 #, c-format
 msgid "A password cracking attack has been attempted by %s."
 msgstr "%s 正在尝试密码破解攻击。"
 
-#: network/ifw.pm:146
+#: network/ifw.pm:137
 #, c-format
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "%s 试图进行“%s”攻击"
 
 #: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
-#: network/netconnect.pm:561 network/netconnect.pm:704
-#: network/netconnect.pm:708
+#: network/netconnect.pm:561 network/netconnect.pm:709
+#: network/netconnect.pm:713
 #, c-format
 msgid "Unlisted - edit manually"
 msgstr "未列出 - 手动编辑"
@@ -10177,12 +10183,12 @@ msgstr "DVB 连接"
 msgid "Choose the connection you want to configure"
 msgstr "选择您想要配置的连接"
 
-#: network/netconnect.pm:288 network/netconnect.pm:782
+#: network/netconnect.pm:288 network/netconnect.pm:787
 #, c-format
 msgid "Connection Configuration"
 msgstr "连接配置"
 
-#: network/netconnect.pm:288 network/netconnect.pm:783
+#: network/netconnect.pm:288 network/netconnect.pm:788
 #, c-format
 msgid "Please fill or check the field below"
 msgstr "请填写或选择下列项目"
@@ -10192,7 +10198,7 @@ msgstr "请填写或选择下列项目"
 msgid "Your personal phone number"
 msgstr "您自己的电话号码"
 
-#: network/netconnect.pm:292 network/netconnect.pm:786
+#: network/netconnect.pm:292 network/netconnect.pm:791
 #, c-format
 msgid "Provider name (ex provider.net)"
 msgstr "服务商名称(如 provider.net)"
@@ -10229,13 +10235,13 @@ msgid "Connection timeout (in sec)"
 msgstr "连接超时(秒)"
 
 #: network/netconnect.pm:299 network/netconnect.pm:324
-#: network/netconnect.pm:789 standalone/drakconnect:491
+#: network/netconnect.pm:794 standalone/drakconnect:491
 #, c-format
 msgid "Account Login (user name)"
 msgstr "账户登录(用户名)"
 
 #: network/netconnect.pm:300 network/netconnect.pm:325
-#: network/netconnect.pm:790 standalone/drakconnect:492
+#: network/netconnect.pm:795 standalone/drakconnect:492
 #, c-format
 msgid "Account Password"
 msgstr "账户密码"
@@ -10276,13 +10282,13 @@ msgid "Use BPALogin (needed for Telstra)"
 msgstr "使用 BPALogin (Telstra 需要)"
 
 #: network/netconnect.pm:349 network/netconnect.pm:671
-#: network/netconnect.pm:822 network/netconnect.pm:1167
+#: network/netconnect.pm:827 network/netconnect.pm:1172
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "选择要配置的网卡: "
 
 #: network/netconnect.pm:351 network/netconnect.pm:386
-#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
+#: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70
 #: standalone/drakconnect:713
 #, c-format
 msgid "Net Device"
@@ -10377,7 +10383,7 @@ msgstr ""
 "如果该提供商未被列出, 请选择“未列出”。"
 
 #: network/netconnect.pm:463 network/netconnect.pm:557
-#: network/netconnect.pm:703
+#: network/netconnect.pm:708
 #, c-format
 msgid "Provider:"
 msgstr "服务商:"
@@ -10436,7 +10442,7 @@ msgstr "拨号: IP 参数"
 msgid "IP parameters"
 msgstr "IP 参数"
 
-#: network/netconnect.pm:603 network/netconnect.pm:938
+#: network/netconnect.pm:603 network/netconnect.pm:943
 #: printer/printerdrake.pm:460 standalone/drakconnect:109
 #: standalone/drakconnect:316 standalone/drakconnect:882
 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
@@ -10464,13 +10470,13 @@ msgstr "DNS"
 msgid "Domain name"
 msgstr "域名"
 
-#: network/netconnect.pm:621 network/netconnect.pm:787
+#: network/netconnect.pm:621 network/netconnect.pm:792
 #: standalone/drakconnect:992
 #, c-format
 msgid "First DNS Server (optional)"
 msgstr "首选 DNS 服务器(可选)"
 
-#: network/netconnect.pm:622 network/netconnect.pm:788
+#: network/netconnect.pm:622 network/netconnect.pm:793
 #: standalone/drakconnect:993
 #, c-format
 msgid "Second DNS Server (optional)"
@@ -10496,12 +10502,12 @@ msgstr "网关 IP 地址"
 msgid "ADSL configuration"
 msgstr "ADSL 配置"
 
-#: network/netconnect.pm:701
+#: network/netconnect.pm:706
 #, c-format
 msgid "Please choose your ADSL provider"
 msgstr "请选择您的 ADSL 提供商"
 
-#: network/netconnect.pm:731
+#: network/netconnect.pm:736
 #, c-format
 msgid ""
 "Please choose your DSL connection type.\n"
@@ -10510,54 +10516,54 @@ msgstr ""
 "请选择您的 DSL 连接类型。\n"
 "如果您不知道的话，请保留预先选择的类型。"
 
-#: network/netconnect.pm:734
+#: network/netconnect.pm:739
 #, c-format
 msgid "ADSL connection type:"
 msgstr "ADSL 连接类型:"
 
-#: network/netconnect.pm:792
+#: network/netconnect.pm:797
 #, c-format
 msgid "Virtual Path ID (VPI):"
 msgstr "虚拟路径 ID (VPI):"
 
-#: network/netconnect.pm:793
+#: network/netconnect.pm:798
 #, c-format
 msgid "Virtual Circuit ID (VCI):"
 msgstr "虚拟电路 ID (VCI):"
 
-#: network/netconnect.pm:796
+#: network/netconnect.pm:801
 #, c-format
 msgid "Encapsulation:"
 msgstr "封装: "
 
-#: network/netconnect.pm:826
+#: network/netconnect.pm:831
 #, c-format
 msgid "Manually load a driver"
 msgstr "手动装入驱动程序"
 
-#: network/netconnect.pm:827
+#: network/netconnect.pm:832
 #, c-format
 msgid "Use a Windows driver (with ndiswrapper)"
 msgstr "使用 Windows 驱动程序(通过 ndiswrapper)"
 
-#: network/netconnect.pm:893
+#: network/netconnect.pm:898
 #, c-format
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf 主机名解析"
 
-#: network/netconnect.pm:894 network/netconnect.pm:925
+#: network/netconnect.pm:899 network/netconnect.pm:930
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "配置网络设备 %s(驱动程序 %s)"
 
-#: network/netconnect.pm:895
+#: network/netconnect.pm:900
 #, c-format
 msgid ""
 "The following protocols can be used to configure a LAN connection. Please "
 "choose the one you want to use"
 msgstr "您可使用下列协议配置局域网连接。请选择您想要使用的协议"
 
-#: network/netconnect.pm:926
+#: network/netconnect.pm:931
 #, c-format
 msgid ""
 "Please enter the IP configuration for this machine.\n"
@@ -10568,198 +10574,198 @@ msgstr ""
 "下列项目要求以句点分隔十进制格式输入的 IP 地址。\n"
 "(例如, 1.2.3.4)"
 
-#: network/netconnect.pm:933 standalone/drakconnect:373
+#: network/netconnect.pm:938 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "从 DHCP 地址指定主机名"
 
-#: network/netconnect.pm:934 standalone/drakconnect:375
+#: network/netconnect.pm:939 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP 主机名"
 
-#: network/netconnect.pm:939 standalone/drakconnect:321
+#: network/netconnect.pm:944 standalone/drakconnect:321
 #: standalone/drakconnect:883 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "子网掩码"
 
-#: network/netconnect.pm:941 standalone/drakconnect:437
+#: network/netconnect.pm:946 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "跟踪网卡标志(用于笔记本电脑)"
 
-#: network/netconnect.pm:942 standalone/drakconnect:438
+#: network/netconnect.pm:947 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "网络热插拔"
 
-#: network/netconnect.pm:944 standalone/drakconnect:432
+#: network/netconnect.pm:949 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "开机时启动"
 
-#: network/netconnect.pm:946 standalone/drakconnect:460
+#: network/netconnect.pm:951 standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "度量衡"
 
-#: network/netconnect.pm:947
+#: network/netconnect.pm:952
 #, c-format
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr "启用 IPv6 到 IPv4 的隧道"
 
-#: network/netconnect.pm:949 standalone/drakconnect:369
+#: network/netconnect.pm:954 standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP 客户端"
 
-#: network/netconnect.pm:951 standalone/drakconnect:379
+#: network/netconnect.pm:956 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP 超时(秒)"
 
-#: network/netconnect.pm:952 standalone/drakconnect:382
+#: network/netconnect.pm:957 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "从 DHCP 获取 DNS 服务器"
 
-#: network/netconnect.pm:953 standalone/drakconnect:383
+#: network/netconnect.pm:958 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "从 DHCP 获取 YP 服务器"
 
-#: network/netconnect.pm:954 standalone/drakconnect:384
+#: network/netconnect.pm:959 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "从 DHCP 获取 NTPD 服务器"
 
-#: network/netconnect.pm:962 printer/printerdrake.pm:1876
+#: network/netconnect.pm:967 printer/printerdrake.pm:1876
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:966 standalone/drakconnect:680
+#: network/netconnect.pm:971 standalone/drakconnect:680
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "子网掩码的格式应该是 255.255.224.0"
 
-#: network/netconnect.pm:970
+#: network/netconnect.pm:975
 #, c-format
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "警告: IP 地址 %s 通常是被保留的！"
 
-#: network/netconnect.pm:975 standalone/drakTermServ:1856
+#: network/netconnect.pm:980 standalone/drakTermServ:1856
 #: standalone/drakTermServ:1857 standalone/drakTermServ:1858
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s 已经被使用了\n"
 
-#: network/netconnect.pm:1015
+#: network/netconnect.pm:1020
 #, c-format
 msgid "Choose an ndiswrapper driver"
 msgstr "选择 ndiswrapper 驱动程序"
 
-#: network/netconnect.pm:1017
+#: network/netconnect.pm:1022
 #, c-format
 msgid "Use the ndiswrapper driver %s"
 msgstr "使用 ndiswrapper 驱动程序 %s"
 
-#: network/netconnect.pm:1017
+#: network/netconnect.pm:1022
 #, c-format
 msgid "Install a new driver"
 msgstr "安装新驱动程序"
 
-#: network/netconnect.pm:1029
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Select a device:"
 msgstr "选择设备:"
 
-#: network/netconnect.pm:1058
+#: network/netconnect.pm:1063
 #, c-format
 msgid "Please enter the wireless parameters for this card:"
 msgstr "请选择此网卡的无线参数:"
 
-#: network/netconnect.pm:1061 standalone/drakconnect:404
+#: network/netconnect.pm:1066 standalone/drakconnect:404
 #: standalone/drakroam:52
 #, c-format
 msgid "Operating Mode"
 msgstr "操作模式"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Ad-hoc"
 msgstr "Ad-hoc"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Managed"
 msgstr "受控的"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Master"
 msgstr "主要的"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Repeater"
 msgstr "转发器"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Secondary"
 msgstr "次要的"
 
-#: network/netconnect.pm:1062
+#: network/netconnect.pm:1067
 #, c-format
 msgid "Auto"
 msgstr "自动"
 
-#: network/netconnect.pm:1065 standalone/drakconnect:405
+#: network/netconnect.pm:1070 standalone/drakconnect:405
 #: standalone/drakroam:115
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "网络名称(ESSID)"
 
-#: network/netconnect.pm:1066 standalone/drakroam:116
+#: network/netconnect.pm:1071 standalone/drakroam:116
 #, c-format
 msgid "Encryption mode"
 msgstr "加密模式"
 
-#: network/netconnect.pm:1071
+#: network/netconnect.pm:1076
 #, c-format
 msgid "Allow access point roaming"
 msgstr "允许访问点漫游"
 
-#: network/netconnect.pm:1073 standalone/drakconnect:406
+#: network/netconnect.pm:1078 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "网络 ID"
 
-#: network/netconnect.pm:1074 standalone/drakconnect:407
+#: network/netconnect.pm:1079 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "运行频率"
 
-#: network/netconnect.pm:1075 standalone/drakconnect:408
+#: network/netconnect.pm:1080 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr "灵敏度阀值"
 
-#: network/netconnect.pm:1076 standalone/drakconnect:409
+#: network/netconnect.pm:1081 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "比特率(每秒比特数, b/s)"
 
-#: network/netconnect.pm:1077 standalone/drakconnect:420
+#: network/netconnect.pm:1082 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr "RTS/CTS"
 
-#: network/netconnect.pm:1078
+#: network/netconnect.pm:1083
 #, c-format
 msgid ""
 "RTS/CTS adds a handshake before each packet transmission to make sure that "
@@ -10778,17 +10784,17 @@ msgstr ""
 "包\n"
 "的大小, 一个等于中止计划的值的大小。您也可以设置这个值为自动、固定或者关闭。"
 
-#: network/netconnect.pm:1085 standalone/drakconnect:421
+#: network/netconnect.pm:1090 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "块"
 
-#: network/netconnect.pm:1086 standalone/drakconnect:422
+#: network/netconnect.pm:1091 standalone/drakconnect:422
 #, c-format
 msgid "iwconfig command extra arguments"
 msgstr "iwconfig 命令的额外参数"
 
-#: network/netconnect.pm:1087
+#: network/netconnect.pm:1092
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
@@ -10804,12 +10810,12 @@ msgstr ""
 "请参看 iwconfig(8) man page 中的更多信息。"
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1094 standalone/drakconnect:423
+#: network/netconnect.pm:1099 standalone/drakconnect:423
 #, c-format
 msgid "iwspy command extra arguments"
 msgstr "iwspy 命令的额外参数"
 
-#: network/netconnect.pm:1095
+#: network/netconnect.pm:1100
 #, c-format
 msgid ""
 "iwspy is used to set a list of addresses in a wireless network\n"
@@ -10827,12 +10833,12 @@ msgstr ""
 "\n"
 "请参看 iwpspy(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1104 standalone/drakconnect:424
+#: network/netconnect.pm:1109 standalone/drakconnect:424
 #, c-format
 msgid "iwpriv command extra arguments"
 msgstr "iwpriv 命令的额外参数"
 
-#: network/netconnect.pm:1105
+#: network/netconnect.pm:1110
 #, c-format
 msgid ""
 "iwpriv enable to set up optionals (private) parameters of a wireless "
@@ -10861,7 +10867,7 @@ msgstr ""
 "\n"
 "请参看 iwpriv(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1120
+#: network/netconnect.pm:1125
 #, c-format
 msgid ""
 "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
@@ -10870,44 +10876,44 @@ msgstr ""
 "频率应该有后缀 k, M 或 G(如“2.46G”代表 2.46 GHz 频率), 或者后带足够"
 "的“0”(零)。"
 
-#: network/netconnect.pm:1124
+#: network/netconnect.pm:1129
 #, c-format
 msgid ""
 "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
 "enough '0' (zeroes)."
 msgstr "速度应该有后缀 k, M 或 G(如“11M”代表 11M), 或者后带足够的“0”(零)。"
 
-#: network/netconnect.pm:1167
+#: network/netconnect.pm:1172
 #, c-format
 msgid "DVB configuration"
 msgstr "DVB 配置"
 
-#: network/netconnect.pm:1168
+#: network/netconnect.pm:1173
 #, c-format
 msgid "DVB Adapter"
 msgstr "DVB 适配器"
 
-#: network/netconnect.pm:1185
+#: network/netconnect.pm:1190
 #, c-format
 msgid "DVB adapter settings"
 msgstr "DVB 适配器设置"
 
-#: network/netconnect.pm:1188
+#: network/netconnect.pm:1193
 #, c-format
 msgid "Adapter card"
 msgstr "适配卡"
 
-#: network/netconnect.pm:1189
+#: network/netconnect.pm:1194
 #, c-format
 msgid "Net demux"
 msgstr "网络互斥"
 
-#: network/netconnect.pm:1190
+#: network/netconnect.pm:1195
 #, c-format
 msgid "PID"
 msgstr "PID"
 
-#: network/netconnect.pm:1218
+#: network/netconnect.pm:1223
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -10919,67 +10925,67 @@ msgstr ""
 "您的主机名称必需是个完全限定的名称, 例如“mybox.mylab.myco.com”。\n"
 "如果您有网关的话, 也请输入其 IP 地址。"
 
-#: network/netconnect.pm:1223
+#: network/netconnect.pm:1228
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr "最后, 您还应该至少输入您 DNS 服务器的 IP 地址。"
 
-#: network/netconnect.pm:1225 standalone/drakconnect:991
+#: network/netconnect.pm:1230 standalone/drakconnect:991
 #, c-format
 msgid "Host name (optional)"
 msgstr "主机名(可选)"
 
-#: network/netconnect.pm:1225 standalone/drakhosts:197
+#: network/netconnect.pm:1230 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "主机名"
 
-#: network/netconnect.pm:1227
+#: network/netconnect.pm:1232
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS 服务器 1"
 
-#: network/netconnect.pm:1228
+#: network/netconnect.pm:1233
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS 服务器 2"
 
-#: network/netconnect.pm:1229
+#: network/netconnect.pm:1234
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS 服务器 3"
 
-#: network/netconnect.pm:1230
+#: network/netconnect.pm:1235
 #, c-format
 msgid "Search domain"
 msgstr "搜索网域"
 
-#: network/netconnect.pm:1231
+#: network/netconnect.pm:1236
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr "默认情况下, 搜索域名将会根据完全限定的主机名进行设定"
 
-#: network/netconnect.pm:1232
+#: network/netconnect.pm:1237
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "网关(如 %s)"
 
-#: network/netconnect.pm:1234
+#: network/netconnect.pm:1239
 #, c-format
 msgid "Gateway device"
 msgstr "网关设备"
 
-#: network/netconnect.pm:1243
+#: network/netconnect.pm:1248
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "DNS 服务器的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1248 standalone/drakconnect:685
+#: network/netconnect.pm:1253 standalone/drakconnect:685
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "网关地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1261
+#: network/netconnect.pm:1266
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -10991,67 +10997,67 @@ msgstr ""
 "这将被您的计算机用于通知其未被网络管理的共享资源。\n"
 "大多数网络中不需要此设置。"
 
-#: network/netconnect.pm:1265
+#: network/netconnect.pm:1270
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf 主机名"
 
-#: network/netconnect.pm:1268
+#: network/netconnect.pm:1273
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr "Zeroconf 主机名不能包含“.”"
 
-#: network/netconnect.pm:1278
+#: network/netconnect.pm:1283
 #, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "您是否希望允许用户启动连接?"
 
-#: network/netconnect.pm:1291
+#: network/netconnect.pm:1296
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "您是否希望一开机就启动连接?"
 
-#: network/netconnect.pm:1307
+#: network/netconnect.pm:1312
 #, c-format
 msgid "Automatically at boot"
 msgstr "开机时自动启动"
 
-#: network/netconnect.pm:1309
+#: network/netconnect.pm:1314
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr "使用系统脱盘中的网络小程序"
 
-#: network/netconnect.pm:1311
+#: network/netconnect.pm:1316
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr "手动(启动时仍会激活网卡)"
 
-#: network/netconnect.pm:1320
+#: network/netconnect.pm:1325
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "您想要如何拨打此连接?"
 
-#: network/netconnect.pm:1333
+#: network/netconnect.pm:1338
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "您想要测试连接到 Internet 吗?"
 
-#: network/netconnect.pm:1341 standalone/drakconnect:1023
+#: network/netconnect.pm:1346 standalone/drakconnect:1023
 #, c-format
 msgid "Testing your connection..."
 msgstr "正在测试您的连接..."
 
-#: network/netconnect.pm:1366
+#: network/netconnect.pm:1371
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "您的系统现在正连接到 Internet。"
 
-#: network/netconnect.pm:1367
+#: network/netconnect.pm:1372
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "由于安全原因, 现在将断开连接。"
 
-#: network/netconnect.pm:1368
+#: network/netconnect.pm:1373
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -11060,7 +11066,7 @@ msgstr ""
 "看来系统没有连接到 Internet。\n"
 "请重新尝试配置您的连接。"
 
-#: network/netconnect.pm:1383
+#: network/netconnect.pm:1388
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -11069,14 +11075,14 @@ msgstr ""
 "恭喜, 网络和 Internet 配置完成。\n"
 "\n"
 
-#: network/netconnect.pm:1386
+#: network/netconnect.pm:1391
 #, c-format
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
 "avoid any hostname-related problems."
 msgstr "建议重启动 X 环境以避免任何与主机名有关的问题。"
 
-#: network/netconnect.pm:1387
+#: network/netconnect.pm:1392
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
@@ -11087,28 +11093,28 @@ msgstr ""
 "请从网络监视器或者控制中心测试您的连接。如果您的连接不工作, 您可能想要重新配"
 "置。"
 
-#: network/netconnect.pm:1398
+#: network/netconnect.pm:1403
 #, c-format
 msgid "(detected on port %s)"
 msgstr "(在端口 %s 检测到)"
 
 #. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:1400
+#: network/netconnect.pm:1405
 #, c-format
 msgid "(detected %s)"
 msgstr "(检测到 %s)"
 
-#: network/netconnect.pm:1400
+#: network/netconnect.pm:1405
 #, c-format
 msgid "(detected)"
 msgstr "(检测到)"
 
-#: network/netconnect.pm:1401
+#: network/netconnect.pm:1406
 #, c-format
 msgid "Network Configuration"
 msgstr "网络配置"
 
-#: network/netconnect.pm:1402
+#: network/netconnect.pm:1407
 #, c-format
 msgid ""
 "Because you are doing a network installation, your network is already "
@@ -11119,12 +11125,12 @@ msgstr ""
 "由于您正在执行网络安装, 您的网络已经配置好了。\n"
 "单击“确定”保存配置, 或“取消”重新配置网络。\n"
 
-#: network/netconnect.pm:1405
+#: network/netconnect.pm:1410
 #, c-format
 msgid "The network needs to be restarted. Do you want to restart it?"
 msgstr "网络需要重新启动。您要重新启动吗?"
 
-#: network/netconnect.pm:1406
+#: network/netconnect.pm:1411
 #, c-format
 msgid ""
 "A problem occurred while restarting the network: \n"
@@ -11135,7 +11141,7 @@ msgstr ""
 "\n"
 "%s"
 
-#: network/netconnect.pm:1407
+#: network/netconnect.pm:1412
 #, c-format
 msgid ""
 "We are now going to configure the %s connection.\n"
@@ -11148,12 +11154,12 @@ msgstr ""
 "\n"
 "按“%s”继续。"
 
-#: network/netconnect.pm:1408
+#: network/netconnect.pm:1413
 #, c-format
 msgid "Configuration is complete, do you want to apply settings?"
 msgstr "配置完成, 您想要应用设置吗?"
 
-#: network/netconnect.pm:1409
+#: network/netconnect.pm:1414
 #, c-format
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
@@ -11164,12 +11170,12 @@ msgstr ""
 "选择您要使用的一种。\n"
 "\n"
 
-#: network/netconnect.pm:1410
+#: network/netconnect.pm:1415
 #, c-format
 msgid "Internet connection"
 msgstr "Internet 连接"
 
-#: network/netconnect.pm:1427
+#: network/netconnect.pm:1432
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -11188,9 +11194,7 @@ msgstr "代理服务器配置"
 msgid ""
 "Here you can set up your proxies configuration (eg: http://"
 "my_caching_server:8080)"
-msgstr ""
-"您可以在此处设定您的代理服务器配置(如: http://"
-"my_caching_server:8080)"
+msgstr "您可以在此处设定您的代理服务器配置(如: http://my_caching_server:8080)"
 
 #: network/network.pm:412
 #, c-format
@@ -17975,7 +17979,7 @@ msgstr "不包括浏览器缓存"
 msgid "Select the files or directories and click on 'OK'"
 msgstr "选择文件或目录, 然后单击“确定”"
 
-#: standalone/drakbackup:1527 standalone/drakfont:658
+#: standalone/drakbackup:1527 standalone/drakfont:657
 #, c-format
 msgid "Remove Selected"
 msgstr "删除选中的"
@@ -19870,109 +19874,109 @@ msgstr ""
 "您即将关闭运行中的全部程序, 并丢失您当前的会话。您真的确定您想要重新启动 dm "
 "服务吗?"
 
-#: standalone/drakfont:183
+#: standalone/drakfont:182
 #, c-format
 msgid "Search installed fonts"
 msgstr "搜索已安装的字体"
 
-#: standalone/drakfont:185
+#: standalone/drakfont:184
 #, c-format
 msgid "Unselect fonts installed"
 msgstr "不选已安装的文件"
 
-#: standalone/drakfont:208
+#: standalone/drakfont:207
 #, c-format
 msgid "parse all fonts"
 msgstr "分析所有字体"
 
-#: standalone/drakfont:210
+#: standalone/drakfont:209
 #, c-format
 msgid "No fonts found"
 msgstr "找不到字体"
 
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
+#: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326
+#: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393
+#: standalone/drakfont:411 standalone/drakfont:425
 #, c-format
 msgid "done"
 msgstr "完成"
 
-#: standalone/drakfont:223
+#: standalone/drakfont:222
 #, c-format
 msgid "Could not find any font in your mounted partitions"
 msgstr "在已挂载的分区中找不到任何字体"
 
-#: standalone/drakfont:258
+#: standalone/drakfont:257
 #, c-format
 msgid "Reselect correct fonts"
 msgstr "重新选择正确字体"
 
-#: standalone/drakfont:261
+#: standalone/drakfont:260
 #, c-format
 msgid "Could not find any font.\n"
 msgstr "找不到任何字体。\n"
 
-#: standalone/drakfont:271
+#: standalone/drakfont:270
 #, c-format
 msgid "Search for fonts in installed list"
 msgstr "在安装记录中查找字体"
 
-#: standalone/drakfont:296
+#: standalone/drakfont:295
 #, c-format
 msgid "%s fonts conversion"
 msgstr "%s 字体转换"
 
-#: standalone/drakfont:325
+#: standalone/drakfont:324
 #, c-format
 msgid "Fonts copy"
 msgstr "复制字体"
 
-#: standalone/drakfont:328
+#: standalone/drakfont:327
 #, c-format
 msgid "True Type fonts installation"
 msgstr "TrueType 字体安装"
 
-#: standalone/drakfont:335
+#: standalone/drakfont:334
 #, c-format
 msgid "please wait during ttmkfdir..."
 msgstr "正在运行 ttmkfdir, 请稍候..."
 
-#: standalone/drakfont:336
+#: standalone/drakfont:335
 #, c-format
 msgid "True Type install done"
 msgstr "TrueType 字体安装完成"
 
-#: standalone/drakfont:342 standalone/drakfont:357
+#: standalone/drakfont:341 standalone/drakfont:356
 #, c-format
 msgid "type1inst building"
 msgstr "正在构造 type1inst"
 
-#: standalone/drakfont:351
+#: standalone/drakfont:350
 #, c-format
 msgid "Ghostscript referencing"
 msgstr "Ghostscript 引用"
 
-#: standalone/drakfont:361
+#: standalone/drakfont:360
 #, c-format
 msgid "Suppress Temporary Files"
 msgstr "删除临时文件"
 
-#: standalone/drakfont:364
+#: standalone/drakfont:363
 #, c-format
 msgid "Restart XFS"
 msgstr "重新启动 XFS"
 
-#: standalone/drakfont:410 standalone/drakfont:420
+#: standalone/drakfont:409 standalone/drakfont:419
 #, c-format
 msgid "Suppress Fonts Files"
 msgstr "删除字体文件"
 
-#: standalone/drakfont:422
+#: standalone/drakfont:421
 #, c-format
 msgid "xfs restart"
 msgstr "重新启动 xfs"
 
-#: standalone/drakfont:430
+#: standalone/drakfont:429
 #, c-format
 msgid ""
 "Before installing any fonts, be sure that you have the right to use and "
@@ -19985,38 +19989,38 @@ msgstr ""
 "\n"
 "通常字体安装可以正常进行。但有罕见的例外, 有问题的字体会使 X 挂住。"
 
-#: standalone/drakfont:474 standalone/drakfont:483
+#: standalone/drakfont:473 standalone/drakfont:482
 #, c-format
 msgid "DrakFont"
 msgstr "Drak 字体"
 
-#: standalone/drakfont:484
+#: standalone/drakfont:483
 #, c-format
 msgid "Font List"
 msgstr "字体列表"
 
-#: standalone/drakfont:487
+#: standalone/drakfont:486
 #, c-format
 msgid "Get Windows Fonts"
 msgstr "获得 Windows 字体"
 
-#: standalone/drakfont:493
+#: standalone/drakfont:492
 #, c-format
 msgid "About"
 msgstr "关于"
 
-#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
+#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724
 #, c-format
 msgid "Uninstall"
 msgstr "卸载"
 
-#: standalone/drakfont:496
+#: standalone/drakfont:495
 #, c-format
 msgid "Import"
 msgstr "导入"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:514
+#: standalone/drakfont:513
 #, c-format
 msgid ""
 "Copyright (C) 2001-2002 by Mandriva \n"
@@ -20037,7 +20041,7 @@ msgstr ""
 "\n"
 "       VIGNAUD Thierry <tvignaud@mandriva.com>"
 
-#: standalone/drakfont:523
+#: standalone/drakfont:522
 #, c-format
 msgid ""
 "This program is free software; you can redistribute it and/or modify\n"
@@ -20067,7 +20071,7 @@ msgstr ""
 "有, 请写信给自由软件基金会, 地址是 Free Software Foundation, Inc., 59 \n"
 "Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: standalone/drakfont:539
+#: standalone/drakfont:538
 #, c-format
 msgid ""
 "Thanks:\n"
@@ -20098,112 +20102,112 @@ msgstr ""
 "\t  Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin 编写: \n"
 "             转换 ttf 字体文件为 afm 和 pfb 字体。\n"
 
-#: standalone/drakfont:558
+#: standalone/drakfont:557
 #, c-format
 msgid "Choose the applications that will support the fonts:"
 msgstr "请选择要支持字体的应用程序: "
 
-#: standalone/drakfont:569
+#: standalone/drakfont:568
 #, c-format
 msgid "Ghostscript"
 msgstr "Ghostscript"
 
-#: standalone/drakfont:570
+#: standalone/drakfont:569
 #, c-format
 msgid "StarOffice"
 msgstr "StarOffice"
 
-#: standalone/drakfont:571
+#: standalone/drakfont:570
 #, c-format
 msgid "Abiword"
 msgstr "Abiword"
 
-#: standalone/drakfont:572
+#: standalone/drakfont:571
 #, c-format
 msgid "Generic Printers"
 msgstr "通用打印机"
 
-#: standalone/drakfont:586
+#: standalone/drakfont:585
 #, c-format
 msgid "Select the font file or directory and click on 'Add'"
 msgstr "选择字体文件或目录, 然后单击“添加”"
 
-#: standalone/drakfont:587
+#: standalone/drakfont:586
 #, c-format
 msgid "File Selection"
 msgstr "选择文件"
 
-#: standalone/drakfont:591
+#: standalone/drakfont:590
 #, c-format
 msgid "Fonts"
 msgstr "字体"
 
-#: standalone/drakfont:654
+#: standalone/drakfont:653
 #, c-format
 msgid "Import fonts"
 msgstr "导入字体"
 
-#: standalone/drakfont:659
+#: standalone/drakfont:658
 #, c-format
 msgid "Install fonts"
 msgstr "安装字体"
 
-#: standalone/drakfont:694
+#: standalone/drakfont:691
 #, c-format
 msgid "click here if you are sure."
 msgstr "如果您确定, 请点击此处。"
 
-#: standalone/drakfont:696
+#: standalone/drakfont:693
 #, c-format
 msgid "here if no."
 msgstr "如果要放弃, 点击此处。"
 
-#: standalone/drakfont:735
+#: standalone/drakfont:732
 #, c-format
 msgid "Unselected All"
 msgstr "全部不选"
 
-#: standalone/drakfont:738
+#: standalone/drakfont:735
 #, c-format
 msgid "Selected All"
 msgstr "全部选中"
 
-#: standalone/drakfont:741
+#: standalone/drakfont:738
 #, c-format
 msgid "Remove List"
 msgstr "删除列表"
 
-#: standalone/drakfont:752 standalone/drakfont:771
+#: standalone/drakfont:749 standalone/drakfont:768
 #, c-format
 msgid "Importing fonts"
 msgstr "导入字体"
 
-#: standalone/drakfont:756 standalone/drakfont:776
+#: standalone/drakfont:753 standalone/drakfont:773
 #, c-format
 msgid "Initial tests"
 msgstr "初始测试"
 
-#: standalone/drakfont:757
+#: standalone/drakfont:754
 #, c-format
 msgid "Copy fonts on your system"
 msgstr "复制系统中的字体"
 
-#: standalone/drakfont:758
+#: standalone/drakfont:755
 #, c-format
 msgid "Install & convert Fonts"
 msgstr "安装并转换字体"
 
-#: standalone/drakfont:759
+#: standalone/drakfont:756
 #, c-format
 msgid "Post Install"
 msgstr "安装后的设置"
 
-#: standalone/drakfont:777
+#: standalone/drakfont:774
 #, c-format
 msgid "Remove fonts on your system"
 msgstr "删除系统中的字体"
 
-#: standalone/drakfont:778
+#: standalone/drakfont:775
 #, c-format
 msgid "Post Uninstall"
 msgstr "删除后"
@@ -23697,6 +23701,11 @@ msgstr ""
 "\n"
 "http://www.mandarkelinux.com/zh_CN/hardware.php3"
 
+#: standalone/finish-install:38 standalone/keyboarddrake:30
+#, c-format
+msgid "Please, choose your keyboard layout."
+msgstr "请选择您使用的键盘布局。"
+
 #: standalone/harddrake2:25
 #, c-format
 msgid "Alternative drivers"
@@ -24495,11 +24504,6 @@ msgstr "账户："
 msgid "Hostname:"
 msgstr "主机名："
 
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "请选择您使用的键盘布局。"
-
 #: standalone/keyboarddrake:45
 #, c-format
 msgid "Do you want the BackSpace to return Delete in console?"
@@ -25759,11 +25763,6 @@ msgstr "选择安装类别"
 msgid "Choose your keyboard"
 msgstr "选择您的键盘"
 
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "分区"
-
 #: steps.pm:22
 #, c-format
 msgid "Format partitions"