Don't break po

1 files changed, 1014 insertions, 840 deletions

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index e1e5d4346..31cbcf525 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX 9.0\n"
-"POT-Creation-Date: 2002-09-04 20:31+0200\n"
+"POT-Creation-Date: 2002-09-11 13:59+0200\n"
 "PO-Revision-Date: 2002-09-05 18:05+0800\n"
 "Last-Translator: Danny Zeng <danny@zeng.com.cn>\n"
 "Language-Team: Simplified Chinese <zh@li.org>\n"
@@ -92,24 +92,24 @@ msgstr "配置所有显示器"
 msgid "Use Xinerama extension"
 msgstr "使用 Xinerama 扩展"
 
-#: ../../Xconfig/card.pm_.c:386
+#: ../../Xconfig/card.pm_.c:387
 #, c-format
 msgid "Configure only card \"%s\"%s"
 msgstr "只配置 \"%s\"%s 卡"
 
-#: ../../Xconfig/card.pm_.c:398 ../../Xconfig/card.pm_.c:399
+#: ../../Xconfig/card.pm_.c:399 ../../Xconfig/card.pm_.c:400
 #: ../../Xconfig/various.pm_.c:23
 #, c-format
 msgid "XFree %s"
 msgstr "XFree %s"
 
-#: ../../Xconfig/card.pm_.c:410 ../../Xconfig/card.pm_.c:436
+#: ../../Xconfig/card.pm_.c:411 ../../Xconfig/card.pm_.c:437
 #: ../../Xconfig/various.pm_.c:23
 #, c-format
 msgid "XFree %s with 3D hardware acceleration"
 msgstr "XFree %s 带有硬件 3D 加速的支持"
 
-#: ../../Xconfig/card.pm_.c:413
+#: ../../Xconfig/card.pm_.c:414
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support but only with XFree %s.\n"
@@ -118,17 +118,17 @@ msgstr ""
 "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持.\n"
 "XFree %s 支持您的显示卡, 它能提供更好的 2D 支持."
 
-#: ../../Xconfig/card.pm_.c:415 ../../Xconfig/card.pm_.c:438
+#: ../../Xconfig/card.pm_.c:416 ../../Xconfig/card.pm_.c:439
 #, c-format
 msgid "Your card can have 3D hardware acceleration support with XFree %s."
 msgstr "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持."
 
-#: ../../Xconfig/card.pm_.c:423 ../../Xconfig/card.pm_.c:444
+#: ../../Xconfig/card.pm_.c:424 ../../Xconfig/card.pm_.c:445
 #, c-format
 msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr "XFree %s 带有试验阶段的3D硬件加速支持"
 
-#: ../../Xconfig/card.pm_.c:426
+#: ../../Xconfig/card.pm_.c:427
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support but only with XFree %s,\n"
@@ -139,7 +139,7 @@ msgstr ""
 "注意这是试验阶段的支持, 它可能会使您的电脑失去反应\n"
 "XFree %s 支持您的显示卡, 它能提供更好的 2D 支持."
 
-#: ../../Xconfig/card.pm_.c:429 ../../Xconfig/card.pm_.c:446
+#: ../../Xconfig/card.pm_.c:430 ../../Xconfig/card.pm_.c:447
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support with XFree %s,\n"
@@ -148,12 +148,12 @@ msgstr ""
 "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持.\n"
 "注意这是试验阶段的支持, 它可能会使您的电脑失去反应."
 
-#: ../../Xconfig/card.pm_.c:452
+#: ../../Xconfig/card.pm_.c:453
 msgid "Xpmac (installation display driver)"
 msgstr "Xpmac (安装显卡驱动)"
 
 #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77
-#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:977
+#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:978
 msgid "Custom"
 msgstr "定制"
 
@@ -173,32 +173,32 @@ msgstr "屏幕分辨率"
 msgid "Test"
 msgstr "测试"
 
-#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:63
+#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67
 #: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/removable.pm_.c:25
 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86
 msgid "Options"
 msgstr "选项"
 
-#: ../../Xconfig/main.pm_.c:121 ../../Xconfig/resolution_and_depth.pm_.c:268
+#: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:268
 #: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:275
 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142
 #: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:104
-#: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176
+#: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197
 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159
-#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310
-#: ../../standalone/drakbackup_.c:3970 ../../standalone/drakbackup_.c:4065
-#: ../../standalone/drakbackup_.c:4084
+#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:246
+#: ../../standalone/drakbackup_.c:3974 ../../standalone/drakbackup_.c:4069
+#: ../../standalone/drakbackup_.c:4088
 msgid "Ok"
 msgstr "确定"
 
-#: ../../Xconfig/main.pm_.c:121 ../../diskdrake/dav.pm_.c:24
-#: ../../harddrake/ui.pm_.c:94 ../../printerdrake.pm_.c:3155
-#: ../../standalone/logdrake_.c:224
+#: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28
+#: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3155
+#: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:224
 msgid "Quit"
 msgstr "结束"
 
-#: ../../Xconfig/main.pm_.c:144
+#: ../../Xconfig/main.pm_.c:145
 #, c-format
 msgid ""
 "Keep the changes?\n"
@@ -293,25 +293,25 @@ msgstr "选取屏幕分辨率以及颜色深度"
 msgid "Graphics card: %s"
 msgstr "显示卡: %s"
 
-#: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1018
-#: ../../bootlook.pm_.c:345 ../../diskdrake/smbnfs_gtk.pm_.c:87
+#: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1019
+#: ../../bootlook.pm_.c:343 ../../diskdrake/smbnfs_gtk.pm_.c:87
 #: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464
 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:354
-#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:174
+#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:195
 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287
-#: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:2124
-#: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3924
-#: ../../standalone/drakbackup_.c:3957 ../../standalone/drakbackup_.c:3983
-#: ../../standalone/drakbackup_.c:4010 ../../standalone/drakbackup_.c:4037
-#: ../../standalone/drakbackup_.c:4097 ../../standalone/drakbackup_.c:4124
-#: ../../standalone/drakbackup_.c:4154 ../../standalone/drakbackup_.c:4180
-#: ../../standalone/drakconnect_.c:115 ../../standalone/drakconnect_.c:147
-#: ../../standalone/drakconnect_.c:289 ../../standalone/drakconnect_.c:537
-#: ../../standalone/drakconnect_.c:679 ../../standalone/drakfloppy_.c:234
-#: ../../standalone/drakfloppy_.c:383 ../../standalone/drakfont_.c:970
+#: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2124
+#: ../../security/main.pm_.c:295 ../../standalone/drakautoinst_.c:203
+#: ../../standalone/drakbackup_.c:3928 ../../standalone/drakbackup_.c:3961
+#: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4014
+#: ../../standalone/drakbackup_.c:4041 ../../standalone/drakbackup_.c:4101
+#: ../../standalone/drakbackup_.c:4128 ../../standalone/drakbackup_.c:4158
+#: ../../standalone/drakbackup_.c:4184 ../../standalone/drakconnect_.c:115
+#: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289
+#: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679
+#: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfont_.c:970
 #: ../../standalone/drakgw_.c:536 ../../standalone/logdrake_.c:224
-#: ../../standalone/logdrake_.c:526
+#: ../../ugtk.pm_.c:296
 msgid "Cancel"
 msgstr "取消"
 
@@ -387,11 +387,11 @@ msgstr "XFree86 服务器: %s\n"
 msgid "XFree86 driver: %s\n"
 msgstr "XFree86 驱动程序: %s\n"
 
-#: ../../Xconfig/various.pm_.c:60
+#: ../../Xconfig/various.pm_.c:61
 msgid "Graphical interface at startup"
 msgstr "开机时启动 X"
 
-#: ../../Xconfig/various.pm_.c:61
+#: ../../Xconfig/various.pm_.c:62
 msgid ""
 "I can setup your computer to automatically start the graphical interface "
 "(XFree) upon booting.\n"
@@ -400,7 +400,7 @@ msgstr ""
 "我可以设定您的电脑在开机时自动进入 X Window 环境，\n"
 "您希望这么做吗?"
 
-#: ../../Xconfig/various.pm_.c:72
+#: ../../Xconfig/various.pm_.c:73
 msgid ""
 "Your graphic card seems to have a TV-OUT connector.\n"
 "It can be configured to work using frame-buffer.\n"
@@ -419,7 +419,7 @@ msgstr ""
 "\n"
 "您是否要使用这个特性?"
 
-#: ../../Xconfig/various.pm_.c:84
+#: ../../Xconfig/various.pm_.c:85
 msgid "What norm is your TV using?"
 msgstr "您的电视信号是什么制式?"
 
@@ -491,7 +491,7 @@ msgstr "紧凑"
 msgid "compact"
 msgstr "紧凑"
 
-#: ../../any.pm_.c:166 ../../any.pm_.c:290
+#: ../../any.pm_.c:166 ../../any.pm_.c:291
 msgid "Video mode"
 msgstr "显示模式"
 
@@ -499,17 +499,17 @@ msgstr "显示模式"
 msgid "Delay before booting default image"
 msgstr "开机等候时间"
 
-#: ../../any.pm_.c:170 ../../any.pm_.c:788
+#: ../../any.pm_.c:170 ../../any.pm_.c:789
 #: ../../diskdrake/smbnfs_gtk.pm_.c:179
-#: ../../install_steps_interactive.pm_.c:1093 ../../network/modem.pm_.c:48
+#: ../../install_steps_interactive.pm_.c:1094 ../../network/modem.pm_.c:48
 #: ../../printerdrake.pm_.c:850 ../../printerdrake.pm_.c:965
-#: ../../standalone/drakbackup_.c:3526 ../../standalone/drakconnect_.c:624
+#: ../../standalone/drakbackup_.c:3530 ../../standalone/drakconnect_.c:624
 #: ../../standalone/drakconnect_.c:649
 msgid "Password"
 msgstr "口令"
 
-#: ../../any.pm_.c:171 ../../any.pm_.c:789
-#: ../../install_steps_interactive.pm_.c:1094
+#: ../../any.pm_.c:171 ../../any.pm_.c:790
+#: ../../install_steps_interactive.pm_.c:1095
 msgid "Password (again)"
 msgstr "口令 (再一次)"
 
@@ -543,14 +543,14 @@ msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "没有口令不能使用 ``限定参数选项''"
 
-#: ../../any.pm_.c:184 ../../any.pm_.c:764
+#: ../../any.pm_.c:184 ../../any.pm_.c:765
 #: ../../diskdrake/interactive.pm_.c:1191
-#: ../../install_steps_interactive.pm_.c:1088
+#: ../../install_steps_interactive.pm_.c:1089
 msgid "Please try again"
 msgstr "请再试一次"
 
-#: ../../any.pm_.c:184 ../../any.pm_.c:764
-#: ../../install_steps_interactive.pm_.c:1088
+#: ../../any.pm_.c:184 ../../any.pm_.c:765
+#: ../../install_steps_interactive.pm_.c:1089
 msgid "The passwords do not match"
 msgstr "两次口令不符"
 
@@ -592,7 +592,7 @@ msgstr ""
 "\n"
 "您要用哪个硬盘启动?"
 
-#: ../../any.pm_.c:247
+#: ../../any.pm_.c:248
 msgid ""
 "Here are the entries on your boot menu so far.\n"
 "You can add some more or change the existing ones."
@@ -600,148 +600,148 @@ msgstr ""
 "现在有下列条目.\n"
 "您可以增加或是更改已存在的条目"
 
-#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1556
-#: ../../standalone/drakbackup_.c:1669 ../../standalone/drakfont_.c:1011
+#: ../../any.pm_.c:258 ../../standalone/drakbackup_.c:1560
+#: ../../standalone/drakbackup_.c:1673 ../../standalone/drakfont_.c:1011
 #: ../../standalone/drakfont_.c:1054
 msgid "Add"
 msgstr "增加"
 
-#: ../../any.pm_.c:257 ../../any.pm_.c:776 ../../diskdrake/dav.pm_.c:64
+#: ../../any.pm_.c:258 ../../any.pm_.c:777 ../../diskdrake/dav.pm_.c:68
 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27
 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153
-#: ../../printerdrake.pm_.c:3155 ../../standalone/drakbackup_.c:2770
+#: ../../printerdrake.pm_.c:3155 ../../standalone/drakbackup_.c:2774
 msgid "Done"
 msgstr "完成"
 
-#: ../../any.pm_.c:257
+#: ../../any.pm_.c:258
 msgid "Modify"
 msgstr "修改"
 
-#: ../../any.pm_.c:265
+#: ../../any.pm_.c:266
 msgid "Which type of entry do you want to add?"
 msgstr "要增加的条目是什么类型?"
 
-#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1703
+#: ../../any.pm_.c:267 ../../standalone/drakbackup_.c:1707
 msgid "Linux"
 msgstr "Linux"
 
-#: ../../any.pm_.c:266
+#: ../../any.pm_.c:267
 msgid "Other OS (SunOS...)"
 msgstr "其??僮飨低? (SunOS...)"
 
-#: ../../any.pm_.c:267
+#: ../../any.pm_.c:268
 msgid "Other OS (MacOS...)"
 msgstr "其他操作系统 (MacOS...)"
 
-#: ../../any.pm_.c:267
+#: ../../any.pm_.c:268
 msgid "Other OS (windows...)"
 msgstr "其他操作系统 (windows...)"
 
-#: ../../any.pm_.c:286
+#: ../../any.pm_.c:287
 msgid "Image"
 msgstr "映象文件"
 
-#: ../../any.pm_.c:287 ../../any.pm_.c:298
+#: ../../any.pm_.c:288 ../../any.pm_.c:299
 msgid "Root"
 msgstr "根目录所在分区"
 
-#: ../../any.pm_.c:288 ../../any.pm_.c:316
+#: ../../any.pm_.c:289 ../../any.pm_.c:317
 msgid "Append"
 msgstr "增加"
 
-#: ../../any.pm_.c:292
+#: ../../any.pm_.c:293
 msgid "Initrd"
 msgstr "Initrd"
 
-#: ../../any.pm_.c:293
+#: ../../any.pm_.c:294
 msgid "Read-write"
 msgstr "可读写"
 
-#: ../../any.pm_.c:300
+#: ../../any.pm_.c:301
 msgid "Table"
 msgstr "表格"
 
-#: ../../any.pm_.c:301
+#: ../../any.pm_.c:302
 msgid "Unsafe"
 msgstr "不安全"
 
-#: ../../any.pm_.c:308 ../../any.pm_.c:313 ../../any.pm_.c:315
+#: ../../any.pm_.c:309 ../../any.pm_.c:314 ../../any.pm_.c:316
 msgid "Label"
 msgstr "标签"
 
-#: ../../any.pm_.c:310 ../../any.pm_.c:320 ../../harddrake/v4l.pm_.c:201
+#: ../../any.pm_.c:311 ../../any.pm_.c:321 ../../harddrake/v4l.pm_.c:201
 msgid "Default"
 msgstr "缺省"
 
-#: ../../any.pm_.c:317
+#: ../../any.pm_.c:318
 msgid "Initrd-size"
 msgstr "Initrd大小"
 
-#: ../../any.pm_.c:319
+#: ../../any.pm_.c:320
 msgid "NoVideo"
 msgstr "无视频"
 
-#: ../../any.pm_.c:327
+#: ../../any.pm_.c:328
 msgid "Remove entry"
 msgstr "删除条目"
 
-#: ../../any.pm_.c:330
+#: ../../any.pm_.c:331
 msgid "Empty label not allowed"
 msgstr "标签不能为空"
 
-#: ../../any.pm_.c:331
+#: ../../any.pm_.c:332
 msgid "You must specify a kernel image"
 msgstr "您必须指定一个内核文件"
 
-#: ../../any.pm_.c:331
+#: ../../any.pm_.c:332
 msgid "You must specify a root partition"
 msgstr "您必须指定根目录所在分区"
 
-#: ../../any.pm_.c:332
+#: ../../any.pm_.c:333
 msgid "This label is already used"
 msgstr "这个名字已经被使用"
 
-#: ../../any.pm_.c:656
+#: ../../any.pm_.c:657
 #, c-format
 msgid "Found %s %s interfaces"
 msgstr "找到 %s %s 接口"
 
-#: ../../any.pm_.c:657
+#: ../../any.pm_.c:658
 msgid "Do you have another one?"
 msgstr "您有其他的吗 ?"
 
-#: ../../any.pm_.c:658
+#: ../../any.pm_.c:659
 #, c-format
 msgid "Do you have any %s interfaces?"
 msgstr "您还有其他 %s 接口吗 ?"
 
-#: ../../any.pm_.c:660 ../../any.pm_.c:823 ../../interactive.pm_.c:132
+#: ../../any.pm_.c:661 ../../any.pm_.c:824 ../../interactive.pm_.c:132
 #: ../../my_gtk.pm_.c:286
 msgid "No"
 msgstr "否"
 
-#: ../../any.pm_.c:660 ../../any.pm_.c:822 ../../interactive.pm_.c:132
+#: ../../any.pm_.c:661 ../../any.pm_.c:823 ../../interactive.pm_.c:132
 #: ../../my_gtk.pm_.c:286
 msgid "Yes"
 msgstr "是"
 
-#: ../../any.pm_.c:661
+#: ../../any.pm_.c:662
 msgid "See hardware info"
 msgstr "查看硬体信息"
 
 #. -PO: the first %s is the card type (scsi, network, sound,...)
 #. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:677
+#: ../../any.pm_.c:678
 #, c-format
 msgid "Installing driver for %s card %s"
 msgstr "正在安装 %s 卡 %s 的驱动程序"
 
-#: ../../any.pm_.c:678
+#: ../../any.pm_.c:679
 #, c-format
 msgid "(module %s)"
 msgstr "(模块 %s)"
 
-#: ../../any.pm_.c:689
+#: ../../any.pm_.c:690
 #, c-format
 msgid ""
 "You may now provide its options to module %s.\n"
@@ -750,7 +750,7 @@ msgstr ""
 "您现在可以提供模块 %s 的参数.\n"
 "注意要输入内存地址请使用 0x 前缀, 如 '0x123'"
 
-#: ../../any.pm_.c:695
+#: ../../any.pm_.c:696
 #, c-format
 msgid ""
 "You may now provide options to module %s.\n"
@@ -761,17 +761,17 @@ msgstr ""
 "选项的格式是 ``name=value name2=value2...'' \n"
 "例如， ``io=0x300 irq=7''"
 
-#: ../../any.pm_.c:697
+#: ../../any.pm_.c:698
 msgid "Module options:"
 msgstr "模块参数"
 
 #. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:709
+#: ../../any.pm_.c:710
 #, c-format
 msgid "Which %s driver should I try?"
 msgstr "尝试使用哪个 %s 驱动程序 ?"
 
-#: ../../any.pm_.c:718
+#: ../../any.pm_.c:719
 #, c-format
 msgid ""
 "In some cases, the %s driver needs to have extra information to work\n"
@@ -787,15 +787,15 @@ msgstr ""
 "确定需要的信息. 偶尔会发生机器在探测中停止反应, 不过这不会损坏什么. \n"
 "您决定怎么做 ?"
 
-#: ../../any.pm_.c:722
+#: ../../any.pm_.c:723
 msgid "Autoprobe"
 msgstr "自动探测"
 
-#: ../../any.pm_.c:722
+#: ../../any.pm_.c:723
 msgid "Specify options"
 msgstr "指定参数"
 
-#: ../../any.pm_.c:734
+#: ../../any.pm_.c:735
 #, c-format
 msgid ""
 "Loading module %s failed.\n"
@@ -804,61 +804,61 @@ msgstr ""
 "模块 %s 加载失败.\n"
 "您要尝试其他的参数吗 ?"
 
-#: ../../any.pm_.c:750
+#: ../../any.pm_.c:751
 msgid "access to X programs"
 msgstr "允许使用 X Window 应用程序"
 
-#: ../../any.pm_.c:751
+#: ../../any.pm_.c:752
 msgid "access to rpm tools"
 msgstr "允许使用包管理工具"
 
-#: ../../any.pm_.c:752
+#: ../../any.pm_.c:753
 msgid "allow \"su\""
 msgstr "允许使用\"su\"指令"
 
-#: ../../any.pm_.c:753
+#: ../../any.pm_.c:754
 msgid "access to administrative files"
 msgstr "允许访问系统配置文件"
 
-#: ../../any.pm_.c:754
+#: ../../any.pm_.c:755
 msgid "access to network tools"
 msgstr "允许使用网络工具"
 
-#: ../../any.pm_.c:755
+#: ../../any.pm_.c:756
 msgid "access to compilation tools"
 msgstr "允许使用编译工具"
 
-#: ../../any.pm_.c:760
+#: ../../any.pm_.c:761
 #, c-format
 msgid "(already added %s)"
 msgstr "(已经增加了 %s)"
 
-#: ../../any.pm_.c:765
+#: ../../any.pm_.c:766
 msgid "This password is too simple"
 msgstr "口令太简单"
 
-#: ../../any.pm_.c:766
+#: ../../any.pm_.c:767
 msgid "Please give a user name"
 msgstr "请给出有关用户名"
 
-#: ../../any.pm_.c:767
+#: ../../any.pm_.c:768
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "用户名只能有小写字母、数字，`-' 和 `_'"
 
-#: ../../any.pm_.c:768
+#: ../../any.pm_.c:769
 msgid "The user name is too long"
 msgstr "该用户名太长"
 
-#: ../../any.pm_.c:769
+#: ../../any.pm_.c:770
 msgid "This user name is already added"
 msgstr "该用户名已经存在"
 
-#: ../../any.pm_.c:773
+#: ../../any.pm_.c:774
 msgid "Add user"
 msgstr "增加新用户"
 
-#: ../../any.pm_.c:774
+#: ../../any.pm_.c:775
 #, c-format
 msgid ""
 "Enter a user\n"
@@ -867,32 +867,32 @@ msgstr ""
 "请输入一个用户名\n"
 "%s"
 
-#: ../../any.pm_.c:775
+#: ../../any.pm_.c:776
 msgid "Accept user"
 msgstr "接受该用户"
 
-#: ../../any.pm_.c:786
+#: ../../any.pm_.c:787
 msgid "Real name"
 msgstr "用户真实姓名"
 
-#: ../../any.pm_.c:787 ../../printerdrake.pm_.c:849
+#: ../../any.pm_.c:788 ../../printerdrake.pm_.c:849
 #: ../../printerdrake.pm_.c:964
 msgid "User name"
 msgstr "用户登录名"
 
-#: ../../any.pm_.c:790
+#: ../../any.pm_.c:791
 msgid "Shell"
 msgstr "Shell"
 
-#: ../../any.pm_.c:792
+#: ../../any.pm_.c:793
 msgid "Icon"
 msgstr "图标"
 
-#: ../../any.pm_.c:819
+#: ../../any.pm_.c:820
 msgid "Autologin"
 msgstr "自动登录"
 
-#: ../../any.pm_.c:820
+#: ../../any.pm_.c:821
 msgid ""
 "I can set up your computer to automatically log on one user.\n"
 "Do you want to use this feature?"
@@ -900,54 +900,54 @@ msgstr ""
 "您可以在这里设定开机时自动以某用户的身份登入系统.\n"
 "您希望使用这个特性吗 ?"
 
-#: ../../any.pm_.c:824
+#: ../../any.pm_.c:825
 msgid "Choose the default user:"
 msgstr "选择缺省的用户:"
 
-#: ../../any.pm_.c:825
+#: ../../any.pm_.c:826
 msgid "Choose the window manager to run:"
 msgstr "选择要运行的窗口管理程序:"
 
-#: ../../any.pm_.c:840
+#: ../../any.pm_.c:841
 msgid "Please choose a language to use."
 msgstr "请选择系统缺省使用的语言."
 
-#: ../../any.pm_.c:842
+#: ../../any.pm_.c:843
 msgid ""
 "Mandrake Linux can support multiple languages. Select\n"
 "the languages you would like to install. They will be available\n"
 "when your installation is complete and you restart your system."
 msgstr "您可以在这里增加系统中其他可用的语言"
 
-#: ../../any.pm_.c:856 ../../install_steps_interactive.pm_.c:689
+#: ../../any.pm_.c:857 ../../install_steps_interactive.pm_.c:690
 #: ../../standalone/drakxtv_.c:73
 msgid "All"
 msgstr "全部"
 
-#: ../../any.pm_.c:977
+#: ../../any.pm_.c:978
 msgid "Allow all users"
 msgstr "允许所有用户使用"
 
-#: ../../any.pm_.c:977
+#: ../../any.pm_.c:978
 msgid "No sharing"
 msgstr "禁止共享"
 
-#: ../../any.pm_.c:987 ../../install_any.pm_.c:1183 ../../standalone.pm_.c:58
+#: ../../any.pm_.c:988 ../../install_any.pm_.c:1198 ../../standalone.pm_.c:58
 #, c-format
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr "需要安装软件包 %s .您同意安装吗 ?"
 
-#: ../../any.pm_.c:990
+#: ../../any.pm_.c:991
 msgid ""
 "You can export using NFS or Samba. Please select which you'd like to use."
 msgstr "您可以通过 NFS 或 Samba 来共享文件. 您希望使用哪一个? "
 
-#: ../../any.pm_.c:998 ../../install_any.pm_.c:1188 ../../standalone.pm_.c:63
+#: ../../any.pm_.c:999 ../../install_any.pm_.c:1203 ../../standalone.pm_.c:63
 #, c-format
 msgid "Mandatory package %s is missing"
 msgstr "无法找到必需的软件包 %s"
 
-#: ../../any.pm_.c:1004
+#: ../../any.pm_.c:1005
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
 "Allowing this will permit users to simply click on \"Share\" in konqueror "
@@ -959,11 +959,11 @@ msgstr ""
 "在这里选择允许, 用户将可以在 KDE 和 Gnome 的文件管理器中点击 \"共享\"菜单项\n"
 "\"定制\" 允许按照不同用户细分设置.\n"
 
-#: ../../any.pm_.c:1018
+#: ../../any.pm_.c:1019
 msgid "Launch userdrake"
 msgstr "运行 Userdrake魔力用户管理"
 
-#: ../../any.pm_.c:1020
+#: ../../any.pm_.c:1021
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
 "You can use userdrake to add a user in this group."
@@ -971,31 +971,31 @@ msgstr ""
 "按用户的共享使用组\"fileshare\". \n"
 "您可以使用 userdrake 添加一个用户到这个组."
 
-#: ../../any.pm_.c:1071
+#: ../../any.pm_.c:1072
 msgid "Welcome To Crackers"
 msgstr "欢迎入侵者"
 
-#: ../../any.pm_.c:1072
+#: ../../any.pm_.c:1073
 msgid "Poor"
 msgstr "差"
 
-#: ../../any.pm_.c:1073 ../../mouse.pm_.c:31
+#: ../../any.pm_.c:1074 ../../mouse.pm_.c:31
 msgid "Standard"
 msgstr "标准"
 
-#: ../../any.pm_.c:1074
+#: ../../any.pm_.c:1075
 msgid "High"
 msgstr "高"
 
-#: ../../any.pm_.c:1075
+#: ../../any.pm_.c:1076
 msgid "Higher"
 msgstr "更高"
 
-#: ../../any.pm_.c:1076
+#: ../../any.pm_.c:1077
 msgid "Paranoid"
 msgstr "苛刻"
 
-#: ../../any.pm_.c:1079
+#: ../../any.pm_.c:1080
 msgid ""
 "This level is to be used with care. It makes your system more easy to use,\n"
 "but very sensitive: it must not be used for a machine connected to others\n"
@@ -1005,13 +1005,13 @@ msgstr ""
 "假如这台机器将要和其他机器联网或者接入互联网, 绝对不要采用这个级别.＼n这个级"
 "别连基本的口令检查也没有."
 
-#: ../../any.pm_.c:1082
+#: ../../any.pm_.c:1083
 msgid ""
 "Password are now enabled, but use as a networked computer is still not "
 "recommended."
 msgstr "启用了口令检查功能. 但是仍不建议用于联网的电脑."
 
-#: ../../any.pm_.c:1083
+#: ../../any.pm_.c:1084
 msgid ""
 "This is the standard security recommended for a computer that will be used "
 "to connect to the Internet as a client."
@@ -1019,13 +1019,13 @@ msgstr ""
 "标准安全级别: \n"
 "推荐在作为客户联接互联网的电脑上使用."
 
-#: ../../any.pm_.c:1084
+#: ../../any.pm_.c:1085
 msgid ""
 "There are already some restrictions, and more automatic checks are run every "
 "night."
 msgstr "添加了某些限制, 每天夜间自动执行更多检查."
 
-#: ../../any.pm_.c:1085
+#: ../../any.pm_.c:1086
 msgid ""
 "With this security level, the use of this system as a server becomes "
 "possible.\n"
@@ -1038,7 +1038,7 @@ msgstr ""
 "拥有足够的安全性, 系统可以作为服务器接受来自众多客户的连接.注意: 如果您的机器"
 "不在互联网上提供服务, 请选择一个较低级别."
 
-#: ../../any.pm_.c:1088
+#: ../../any.pm_.c:1089
 msgid ""
 "This is similar to the previous level, but the system is entirely closed and "
 "security features are at their maximum."
@@ -1046,32 +1046,32 @@ msgstr ""
 "类似于前一安全级别, 不过系统处于完全封闭状态.\n"
 "所有安全特性达到最大限度."
 
-#: ../../any.pm_.c:1094
+#: ../../any.pm_.c:1095
 msgid "DrakSec Basic Options"
 msgstr "DrakSec安全配置精灵 基本选项"
 
-#: ../../any.pm_.c:1095
+#: ../../any.pm_.c:1096
 msgid "Please choose the desired security level"
 msgstr "请选择期望的安全级别"
 
-#: ../../any.pm_.c:1098
+#: ../../any.pm_.c:1099
 msgid "Security level"
 msgstr "安全级别"
 
-#: ../../any.pm_.c:1100
+#: ../../any.pm_.c:1101
 msgid "Use libsafe for servers"
 msgstr "服务器使用 libsafe"
 
-#: ../../any.pm_.c:1101
+#: ../../any.pm_.c:1102
 msgid ""
 "A library which defends against buffer overflow and format string attacks."
 msgstr "防止缓冲溢出和串格式攻击"
 
-#: ../../any.pm_.c:1102
+#: ../../any.pm_.c:1103
 msgid "Security Administrator (login or email)"
 msgstr "安全管理员 (登录名或 email)"
 
-#: ../../any.pm_.c:1189
+#: ../../any.pm_.c:1192
 msgid ""
 "Here you can choose the key or key combination that will \n"
 "allow switching between the different keyboard layouts\n"
@@ -1082,7 +1082,7 @@ msgstr ""
 "(例如, 英文和中文)"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:381
+#: ../../bootloader.pm_.c:429
 #, c-format
 msgid ""
 "Welcome to %s the operating system chooser!\n"
@@ -1099,58 +1099,58 @@ msgstr ""
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
 #. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:938
+#: ../../bootloader.pm_.c:989
 msgid "Welcome to GRUB the operating system chooser!"
 msgstr "Welcome to GRUB the operating system chooser!"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
 #. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:941
+#: ../../bootloader.pm_.c:992
 #, c-format
 msgid "Use the %c and %c keys for selecting which entry is highlighted."
 msgstr "Use the %c and %c keys for selecting which entry is highlighted."
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
 #. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:944
+#: ../../bootloader.pm_.c:995
 msgid "Press enter to boot the selected OS, 'e' to edit the"
 msgstr "Press enter to boot the selected OS, 'e' to edit the"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
 #. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:947
+#: ../../bootloader.pm_.c:998
 msgid "commands before booting, or 'c' for a command-line."
 msgstr "commands before booting, or 'c' for a command-line."
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
 #. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:950
+#: ../../bootloader.pm_.c:1001
 #, c-format
 msgid "The highlighted entry will be booted automatically in %d seconds."
 msgstr "The highlighted entry will be booted automatically in %d seconds."
 
-#: ../../bootloader.pm_.c:954
+#: ../../bootloader.pm_.c:1005
 msgid "not enough room in /boot"
 msgstr " /boot 中没有足够空间"
 
 #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
 #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1054
+#: ../../bootloader.pm_.c:1105
 msgid "Desktop"
 msgstr "桌面"
 
 #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1056
+#: ../../bootloader.pm_.c:1107
 msgid "Start Menu"
 msgstr "开始菜单"
 
-#: ../../bootloader.pm_.c:1075
+#: ../../bootloader.pm_.c:1126
 #, c-format
 msgid "You can't install the bootloader on a %s partition\n"
 msgstr "%s 分区不能安装开机引导程序\n"
 
-#: ../../bootlook.pm_.c:46 ../../standalone/drakperm_.c:16
-#: ../../standalone/draksplash_.c:25
+#: ../../bootlook.pm_.c:46 ../../standalone/drakperm_.c:15
+#: ../../standalone/draksplash_.c:26
 msgid "no help implemented yet.\n"
 msgstr "帮助功能未实现.\n"
 
@@ -1202,63 +1202,63 @@ msgstr "Lilo/grub模式"
 msgid "Yaboot mode"
 msgstr "Yaboot模式"
 
-#: ../../bootlook.pm_.c:148
+#: ../../bootlook.pm_.c:146
 msgid "Install themes"
 msgstr "安装主题"
 
-#: ../../bootlook.pm_.c:149
+#: ../../bootlook.pm_.c:147
 msgid "Display theme under console"
 msgstr "控制台下显示主题"
 
-#: ../../bootlook.pm_.c:150
+#: ../../bootlook.pm_.c:148
 msgid "Create new theme"
 msgstr "创建新的主题"
 
-#: ../../bootlook.pm_.c:193
+#: ../../bootlook.pm_.c:192
 #, c-format
 msgid "Backup %s to %s.old"
 msgstr "把 %s 备份到 %s.old"
 
-#: ../../bootlook.pm_.c:194 ../../bootlook.pm_.c:197 ../../bootlook.pm_.c:200
-#: ../../bootlook.pm_.c:230 ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:242
-#: ../../bootlook.pm_.c:251 ../../bootlook.pm_.c:258
-#: ../../diskdrake/dav.pm_.c:73 ../../diskdrake/hd_gtk.pm_.c:116
+#: ../../bootlook.pm_.c:193 ../../bootlook.pm_.c:196 ../../bootlook.pm_.c:199
+#: ../../bootlook.pm_.c:229 ../../bootlook.pm_.c:231 ../../bootlook.pm_.c:241
+#: ../../bootlook.pm_.c:250 ../../bootlook.pm_.c:257
+#: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:116
 #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:355
 #: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/interactive.pm_.c:474
 #: ../../diskdrake/smbnfs_gtk.pm_.c:45 ../../fsedit.pm_.c:239
 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
 #: ../../interactive/http.pm_.c:119 ../../interactive/http.pm_.c:120
-#: ../../standalone/draksplash_.c:32
+#: ../../standalone/draksplash_.c:34
 msgid "Error"
 msgstr "错误"
 
-#: ../../bootlook.pm_.c:194
+#: ../../bootlook.pm_.c:193
 msgid "unable to backup lilo message"
 msgstr "无法备份 LILO 消息"
 
-#: ../../bootlook.pm_.c:196
+#: ../../bootlook.pm_.c:195
 #, c-format
 msgid "Copy %s to %s"
 msgstr "把 %s 复制到 %s"
 
-#: ../../bootlook.pm_.c:197
+#: ../../bootlook.pm_.c:196
 msgid "can't change lilo message"
 msgstr "无法修改 LILO 消息"
 
-#: ../../bootlook.pm_.c:200
+#: ../../bootlook.pm_.c:199
 msgid "Lilo message not found"
 msgstr "没有找到 LILO 消息"
 
-#: ../../bootlook.pm_.c:230
+#: ../../bootlook.pm_.c:229
 msgid "Can't write /etc/sysconfig/bootsplash."
 msgstr "无法写入 /etc/sysconfig/bootsplash."
 
-#: ../../bootlook.pm_.c:230
+#: ../../bootlook.pm_.c:229
 #, c-format
 msgid "Write %s"
 msgstr "写入 %s"
 
-#: ../../bootlook.pm_.c:232
+#: ../../bootlook.pm_.c:231
 msgid ""
 "Can't write /etc/sysconfig/bootsplash\n"
 "File not found."
@@ -1266,17 +1266,17 @@ msgstr ""
 "无法写入 /etc/sysconfig/bootsplash.\n"
 "没有找到文件."
 
-#: ../../bootlook.pm_.c:243
+#: ../../bootlook.pm_.c:242
 #, c-format
 msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
 msgstr "无法打开 mkinitrd -f /boot/initrd-%s.img %s."
 
-#: ../../bootlook.pm_.c:246
+#: ../../bootlook.pm_.c:245
 #, c-format
 msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
 msgstr "建造 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
 
-#: ../../bootlook.pm_.c:252
+#: ../../bootlook.pm_.c:251
 msgid ""
 "Can't relaunch LiLo!\n"
 "Launch \"lilo\" as root in command line to complete LiLo theme installation."
@@ -1284,24 +1284,24 @@ msgstr ""
 "无法重新起动 LiLo!\n"
 "以 root 身分运行 \"lilo\" 命令, 以完成 LiLo 主题安装."
 
-#: ../../bootlook.pm_.c:256
+#: ../../bootlook.pm_.c:255
 msgid "Relaunch 'lilo'"
 msgstr "重新起动 'liLo'"
 
-#: ../../bootlook.pm_.c:258 ../../standalone/draksplash_.c:161
-#: ../../standalone/draksplash_.c:330 ../../standalone/draksplash_.c:454
+#: ../../bootlook.pm_.c:257 ../../standalone/draksplash_.c:165
+#: ../../standalone/draksplash_.c:329 ../../standalone/draksplash_.c:456
 msgid "Notice"
 msgstr "注意"
 
-#: ../../bootlook.pm_.c:259
+#: ../../bootlook.pm_.c:258
 msgid "LiLo and Bootsplash themes installation successfull"
 msgstr "LiLo 和 Bootsplash 主题安装成功"
 
-#: ../../bootlook.pm_.c:259
+#: ../../bootlook.pm_.c:258
 msgid "Theme installation failed!"
 msgstr "主题安装失败!"
 
-#: ../../bootlook.pm_.c:268
+#: ../../bootlook.pm_.c:266
 #, c-format
 msgid ""
 "You are currently using %s as your boot manager.\n"
@@ -1310,21 +1310,21 @@ msgstr ""
 "你目前使用 %s 作为开机程序管理器.\n"
 "点击 '配置' 按钮运行配置精灵."
 
-#: ../../bootlook.pm_.c:270 ../../standalone/drakbackup_.c:2425
-#: ../../standalone/drakbackup_.c:2435 ../../standalone/drakbackup_.c:2445
-#: ../../standalone/drakbackup_.c:2453 ../../standalone/drakgw_.c:530
+#: ../../bootlook.pm_.c:268 ../../standalone/drakbackup_.c:2429
+#: ../../standalone/drakbackup_.c:2439 ../../standalone/drakbackup_.c:2449
+#: ../../standalone/drakbackup_.c:2457 ../../standalone/drakgw_.c:530
 msgid "Configure"
 msgstr "配置"
 
-#: ../../bootlook.pm_.c:277
+#: ../../bootlook.pm_.c:275
 msgid "Splash selection"
 msgstr "选择起动画面"
 
-#: ../../bootlook.pm_.c:280
+#: ../../bootlook.pm_.c:278
 msgid "Themes"
 msgstr "主题"
 
-#: ../../bootlook.pm_.c:282
+#: ../../bootlook.pm_.c:280
 msgid ""
 "\n"
 "Select a theme for\n"
@@ -1336,44 +1336,44 @@ msgstr ""
 "选择用于 lilo 和 bootsplash 的主题,\n"
 "您可以分别选择"
 
-#: ../../bootlook.pm_.c:285
+#: ../../bootlook.pm_.c:283
 msgid "Lilo screen"
 msgstr "Lilo 屏幕"
 
-#: ../../bootlook.pm_.c:290
+#: ../../bootlook.pm_.c:288
 msgid "Bootsplash"
 msgstr "Bootsplash 开机画面"
 
-#: ../../bootlook.pm_.c:325
+#: ../../bootlook.pm_.c:323
 msgid "System mode"
 msgstr "系统模式"
 
-#: ../../bootlook.pm_.c:327
+#: ../../bootlook.pm_.c:325
 msgid "Launch the graphical environment when your system starts"
 msgstr "启动时运行X窗口"
 
-#: ../../bootlook.pm_.c:332
+#: ../../bootlook.pm_.c:330
 msgid "No, I don't want autologin"
 msgstr "不，不要自动录入"
 
-#: ../../bootlook.pm_.c:334
+#: ../../bootlook.pm_.c:332
 msgid "Yes, I want autologin with this (user, desktop)"
 msgstr "是, 以(用户,桌面)录入"
 
-#: ../../bootlook.pm_.c:344 ../../network/netconnect.pm_.c:101
+#: ../../bootlook.pm_.c:342 ../../network/netconnect.pm_.c:97
 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300
-#: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4189
-#: ../../standalone/drakbackup_.c:4950 ../../standalone/drakconnect_.c:108
+#: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4193
+#: ../../standalone/drakbackup_.c:4956 ../../standalone/drakconnect_.c:108
 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296
 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521
 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667
-#: ../../standalone/drakfloppy_.c:376 ../../standalone/drakfont_.c:612
-#: ../../standalone/drakfont_.c:799 ../../standalone/drakfont_.c:876
-#: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:519
+#: ../../standalone/drakfont_.c:612 ../../standalone/drakfont_.c:799
+#: ../../standalone/drakfont_.c:876 ../../standalone/drakfont_.c:963
+#: ../../ugtk.pm_.c:289
 msgid "OK"
 msgstr "确定"
 
-#: ../../bootlook.pm_.c:414
+#: ../../bootlook.pm_.c:402
 #, c-format
 msgid "can not open /etc/inittab for reading: %s"
 msgstr "无法打开 /etc/inittab 读: %s"
@@ -1470,50 +1470,58 @@ msgstr "奥地利"
 msgid "United States"
 msgstr "美国"
 
-#: ../../diskdrake/dav.pm_.c:23
+#: ../../diskdrake/dav.pm_.c:19
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+
+#: ../../diskdrake/dav.pm_.c:27
 msgid "New"
 msgstr "新建"
 
-#: ../../diskdrake/dav.pm_.c:59 ../../diskdrake/interactive.pm_.c:388
+#: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:388
 #: ../../diskdrake/smbnfs_gtk.pm_.c:81
 msgid "Unmount"
 msgstr "卸载"
 
-#: ../../diskdrake/dav.pm_.c:60 ../../diskdrake/interactive.pm_.c:385
+#: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:385
 #: ../../diskdrake/smbnfs_gtk.pm_.c:82
 msgid "Mount"
 msgstr "装载"
 
-#: ../../diskdrake/dav.pm_.c:61
+#: ../../diskdrake/dav.pm_.c:65
 msgid "Server"
 msgstr "服务器"
 
-#: ../../diskdrake/dav.pm_.c:62 ../../diskdrake/interactive.pm_.c:379
+#: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:379
 #: ../../diskdrake/interactive.pm_.c:568 ../../diskdrake/interactive.pm_.c:595
 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15
 #: ../../diskdrake/smbnfs_gtk.pm_.c:85
 msgid "Mount point"
 msgstr "装载点"
 
-#: ../../diskdrake/dav.pm_.c:81
+#: ../../diskdrake/dav.pm_.c:85
 msgid "Please enter the WebDAV server URL"
 msgstr "请输入 WebDAV 服务器的 URL"
 
-#: ../../diskdrake/dav.pm_.c:84
+#: ../../diskdrake/dav.pm_.c:88
 msgid "The URL must begin with http:// or https://"
 msgstr "Url 应该是以 'http://' 或 'https://'开头"
 
-#: ../../diskdrake/dav.pm_.c:105
+#: ../../diskdrake/dav.pm_.c:109
 msgid "Server: "
 msgstr "服务器:"
 
-#: ../../diskdrake/dav.pm_.c:106 ../../diskdrake/interactive.pm_.c:440
+#: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:440
 #: ../../diskdrake/interactive.pm_.c:1089
 #: ../../diskdrake/interactive.pm_.c:1164
 msgid "Mount point: "
 msgstr "加载点:"
 
-#: ../../diskdrake/dav.pm_.c:107 ../../diskdrake/interactive.pm_.c:1170
+#: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1170
 #, c-format
 msgid "Options: %s"
 msgstr "选项: %s"
@@ -1600,7 +1608,7 @@ msgstr "空"
 
 #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:325
 #: ../../install_steps_gtk.pm_.c:383 ../../mouse.pm_.c:165
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1752
+#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1756
 msgid "Other"
 msgstr "其他"
 
@@ -1740,7 +1748,7 @@ msgstr ""
 "备份分区表的大小和原来的不同\n"
 "继续吗 ?"
 
-#: ../../diskdrake/interactive.pm_.c:349
+#: ../../diskdrake/interactive.pm_.c:349 ../../harddrake/sound.pm_.c:200
 msgid "Warning"
 msgstr "警告"
 
@@ -2289,7 +2297,7 @@ msgid ""
 "Please enter your username, password and domain name to access this host."
 msgstr "要访问此主机, 请输入您的用户名, 口令和域名"
 
-#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3525
+#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3529
 msgid "Username"
 msgstr "用户名"
 
@@ -2301,23 +2309,23 @@ msgstr "域"
 msgid "Search servers"
 msgstr "搜索服务器"
 
-#: ../../fs.pm_.c:544 ../../fs.pm_.c:554 ../../fs.pm_.c:558 ../../fs.pm_.c:562
-#: ../../fs.pm_.c:566 ../../fs.pm_.c:570
+#: ../../fs.pm_.c:545 ../../fs.pm_.c:555 ../../fs.pm_.c:559 ../../fs.pm_.c:563
+#: ../../fs.pm_.c:567 ../../fs.pm_.c:571
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "%s, 格式化 %s 失败"
 
-#: ../../fs.pm_.c:607
+#: ../../fs.pm_.c:608
 #, c-format
 msgid "I don't know how to format %s in type %s"
 msgstr "不知道如何格式化 %s 成 %s 类型"
 
-#: ../../fs.pm_.c:681 ../../fs.pm_.c:724
+#: ../../fs.pm_.c:682 ../../fs.pm_.c:725
 #, c-format
 msgid "mounting partition %s in directory %s failed"
 msgstr "将分区 %s 加载于目录 %s 失败"
 
-#: ../../fs.pm_.c:739 ../../partition_table.pm_.c:598
+#: ../../fs.pm_.c:740 ../../partition_table.pm_.c:598
 #, c-format
 msgid "error unmounting %s: %s"
 msgstr "卸载 %s 失败: %s"
@@ -2401,45 +2409,108 @@ msgstr "已完成"
 msgid "Error opening %s for writing: %s"
 msgstr "在打开 %s 写入时发生错误: %s"
 
-#: ../../harddrake/sound.pm_.c:155
+#: ../../harddrake/sound.pm_.c:168
 msgid "No alternative driver"
 msgstr "没有替代的驱动程序"
 
-#: ../../harddrake/sound.pm_.c:156
-#, c-format
-msgid "There's no known OSS/ALSA alternative driver for your sound card (%s)"
+#: ../../harddrake/sound.pm_.c:169
+#, fuzzy, c-format
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
 msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡 (%s) 上"
 
-#: ../../harddrake/sound.pm_.c:158
+#: ../../harddrake/sound.pm_.c:171
 msgid "Sound configuration"
 msgstr "声音配置"
 
-#: ../../harddrake/sound.pm_.c:159
+#: ../../harddrake/sound.pm_.c:172
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)"
+"sound card (%s)."
 msgstr ""
 "您可以在这里配置可以用在您的声卡 (%s) 上的替代驱动程序 (可以选择OSS 或 ALSA)"
 
-#: ../../harddrake/sound.pm_.c:162
+#: ../../harddrake/sound.pm_.c:174
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+
+#: ../../harddrake/sound.pm_.c:176
 msgid "Driver:"
 msgstr "驱动程序:"
 
-#: ../../harddrake/sound.pm_.c:173
+#: ../../harddrake/sound.pm_.c:181 ../../standalone/drakTermServ_.c:246
+#: ../../standalone/drakbackup_.c:3932 ../../standalone/drakbackup_.c:3965
+#: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4018
+#: ../../standalone/drakbackup_.c:4045 ../../standalone/drakbackup_.c:4084
+#: ../../standalone/drakbackup_.c:4105 ../../standalone/drakbackup_.c:4132
+#: ../../standalone/drakbackup_.c:4162 ../../standalone/drakbackup_.c:4188
+#: ../../standalone/drakbackup_.c:4213 ../../standalone/drakfont_.c:700
+msgid "Help"
+msgstr "帮助"
+
+#: ../../harddrake/sound.pm_.c:183
+msgid "Switching between ALSA and OSS help"
+msgstr ""
+
+#: ../../harddrake/sound.pm_.c:184
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+
+#: ../../harddrake/sound.pm_.c:200
+#, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oopses the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
+
+#: ../../harddrake/sound.pm_.c:203 ../../standalone/drakconnect_.c:301
+msgid "Please Wait... Applying the configuration"
+msgstr "请等待...设定配置"
+
+#: ../../harddrake/sound.pm_.c:203 ../../harddrake/ui.pm_.c:111
+#: ../../interactive.pm_.c:391
+msgid "Please wait"
+msgstr "请稍候"
+
+#: ../../harddrake/sound.pm_.c:208
 msgid "No known driver"
 msgstr "没有已知驱动程序"
 
-#: ../../harddrake/sound.pm_.c:174
+#: ../../harddrake/sound.pm_.c:209
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "没有已知的驱动程序可以用在您的声卡 (%s) 上"
 
-#: ../../harddrake/sound.pm_.c:177
+#: ../../harddrake/sound.pm_.c:212
 msgid "Unkown driver"
 msgstr "未知的驱动程序"
 
-#: ../../harddrake/sound.pm_.c:178
+#: ../../harddrake/sound.pm_.c:213
 #, c-format
 msgid ""
 "The \"%s\" driver for your sound card is unlisted\n"
@@ -2566,7 +2637,8 @@ msgid "/_Quit"
 msgstr "_Q 结束"
 
 #: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65
-#: ../../harddrake/ui.pm_.c:71 ../../standalone/logdrake_.c:110
+#: ../../harddrake/ui.pm_.c:71 ../../harddrake/ui.pm_.c:73
+#: ../../standalone/logdrake_.c:110
 msgid "/_Help"
 msgstr "/_H 帮助"
 
@@ -2587,14 +2659,18 @@ msgstr ""
 "\n"
 
 #: ../../harddrake/ui.pm_.c:71
+msgid "/_Report Bug"
+msgstr "/故障报告(_R)"
+
+#: ../../harddrake/ui.pm_.c:73
 msgid "/_About..."
 msgstr "/_A 关于..."
 
-#: ../../harddrake/ui.pm_.c:72
+#: ../../harddrake/ui.pm_.c:74
 msgid "About Harddrake"
 msgstr "关于 Harddrake魔力硬件配置"
 
-#: ../../harddrake/ui.pm_.c:73
+#: ../../harddrake/ui.pm_.c:75
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
 "Version:"
@@ -2602,56 +2678,53 @@ msgstr ""
 "这是 Harddrake魔力硬件配置, Mandrake 的硬件配置工具.\n"
 "版本 :"
 
-#: ../../harddrake/ui.pm_.c:74
+#: ../../harddrake/ui.pm_.c:76
 msgid "Author:"
 msgstr "作者 :"
 
-#: ../../harddrake/ui.pm_.c:84
+#: ../../harddrake/ui.pm_.c:86
 msgid "Harddrake2 version "
 msgstr "Harddrake2 版本 "
 
-#: ../../harddrake/ui.pm_.c:99
+#: ../../harddrake/ui.pm_.c:101
 msgid "Detected hardware"
 msgstr "检测到的硬件"
 
-#: ../../harddrake/ui.pm_.c:101
+#: ../../harddrake/ui.pm_.c:103
 msgid "Information"
 msgstr "信息"
 
-#: ../../harddrake/ui.pm_.c:104
+#: ../../harddrake/ui.pm_.c:106
 msgid "Configure module"
 msgstr "配置模块"
 
-#: ../../harddrake/ui.pm_.c:105
+#: ../../harddrake/ui.pm_.c:107
 msgid "Run config tool"
 msgstr "运行配置工具"
 
-#: ../../harddrake/ui.pm_.c:109
+#: ../../harddrake/ui.pm_.c:111
 msgid "Detection in progress"
 msgstr "检测进行中"
 
-#: ../../harddrake/ui.pm_.c:109 ../../interactive.pm_.c:391
-msgid "Please wait"
-msgstr "请稍候"
-
-#: ../../harddrake/ui.pm_.c:143
+#: ../../harddrake/ui.pm_.c:148
 msgid "You can configure each parameter of the module here."
 msgstr "您可以配置模块的各个参数"
 
-#: ../../harddrake/ui.pm_.c:161
+#: ../../harddrake/ui.pm_.c:166
 #, c-format
 msgid "Running \"%s\" ..."
 msgstr "正在运行 \"%s\" ..."
 
-#: ../../harddrake/ui.pm_.c:176
-msgid "Probing $Ident class\n"
-msgstr "探测 $Ident 类\n"
+#: ../../harddrake/ui.pm_.c:180
+#, c-format
+msgid "Probing %s class\n"
+msgstr "探测 %s 类\n"
 
-#: ../../harddrake/ui.pm_.c:198
+#: ../../harddrake/ui.pm_.c:201
 msgid "primary"
 msgstr "主"
 
-#: ../../harddrake/ui.pm_.c:198
+#: ../../harddrake/ui.pm_.c:201
 msgid "secondary"
 msgstr "次"
 
@@ -4307,7 +4380,7 @@ msgstr ""
 msgid "You must also format %s"
 msgstr "您还必须格式化 %s"
 
-#: ../../install_any.pm_.c:423
+#: ../../install_any.pm_.c:424
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -4330,7 +4403,7 @@ msgstr ""
 "\n"
 "果真安装这些服务?\n"
 
-#: ../../install_any.pm_.c:441
+#: ../../install_any.pm_.c:442
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -4343,31 +4416,31 @@ msgstr ""
 "\n"
 "您确定要删除这些软件包吗?\n"
 
-#: ../../install_any.pm_.c:471
+#: ../../install_any.pm_.c:472
 msgid "Can't use broadcast with no NIS domain"
 msgstr "没有NIS域， 无法使用广播"
 
-#: ../../install_any.pm_.c:862
+#: ../../install_any.pm_.c:869
 #, c-format
 msgid "Insert a FAT formatted floppy in drive %s"
 msgstr "请插入一张DOS软盘到驱动器 %s"
 
-#: ../../install_any.pm_.c:866
+#: ../../install_any.pm_.c:873
 msgid "This floppy is not FAT formatted"
 msgstr "不是DOS格式的软盘"
 
-#: ../../install_any.pm_.c:878
+#: ../../install_any.pm_.c:885
 msgid ""
 "To use this saved packages selection, boot installation with ``linux "
 "defcfg=floppy''"
 msgstr "使用保存的软件包选择, 以''linux defcfg=floppy''启动"
 
-#: ../../install_any.pm_.c:901 ../../partition_table.pm_.c:767
+#: ../../install_any.pm_.c:908 ../../partition_table.pm_.c:767
 #, c-format
 msgid "Error reading file %s"
 msgstr "请取文件 %s 出错 "
 
-#: ../../install_any.pm_.c:1023
+#: ../../install_any.pm_.c:1030
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
 "filesystems. Please check your hardware for the cause of this problem"
@@ -4604,7 +4677,7 @@ msgstr ""
 msgid "Welcome to %s"
 msgstr "欢迎来到 %s"
 
-#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:772
+#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:770
 msgid "No floppy drive available"
 msgstr "没有可用的软盘驱动器."
 
@@ -4633,11 +4706,11 @@ msgstr "安装类别"
 msgid "Please choose one of the following classes of installation:"
 msgstr "请从下列安装类别里选择一个:"
 
-#: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:675
+#: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:676
 msgid "Package Group Selection"
 msgstr "程序组选择"
 
-#: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:690
+#: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:691
 msgid "Individual package selection"
 msgstr "选择单个软件包"
 
@@ -4713,7 +4786,7 @@ msgstr "显示自动选中的软件包"
 
 #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_interactive.pm_.c:255
 #: ../../install_steps_interactive.pm_.c:259
-#: ../../standalone/drakbackup_.c:4255
+#: ../../standalone/drakbackup_.c:4259
 msgid "Install"
 msgstr "安装"
 
@@ -4733,7 +4806,7 @@ msgstr "最小安装"
 msgid "Choose the packages you want to install"
 msgstr "选择您要安装的软件包"
 
-#: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:759
+#: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:760
 msgid "Installing"
 msgstr "正在安装"
 
@@ -4760,17 +4833,17 @@ msgid "Installing package %s"
 msgstr "正在安装程序 %s"
 
 #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189
-#: ../../install_steps_interactive.pm_.c:783
+#: ../../install_steps_interactive.pm_.c:784
 #: ../../standalone/drakautoinst_.c:202
 msgid "Accept"
 msgstr "接受"
 
 #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189
-#: ../../install_steps_interactive.pm_.c:783
+#: ../../install_steps_interactive.pm_.c:784
 msgid "Refuse"
 msgstr "拒绝"
 
-#: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:784
+#: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:785
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -4785,16 +4858,16 @@ msgstr ""
 "如果您没有这张光盘, 请点击 '取消', 放弃安装这个光盘上的软件."
 
 #: ../../install_steps_gtk.pm_.c:611 ../../install_steps_gtk.pm_.c:615
-#: ../../install_steps_interactive.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:800
+#: ../../install_steps_interactive.pm_.c:797
+#: ../../install_steps_interactive.pm_.c:801
 msgid "Go on anyway?"
 msgstr "真的要继续"
 
-#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:796
+#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:797
 msgid "There was an error ordering packages:"
 msgstr "排列软件包时出错"
 
-#: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:800
+#: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:801
 msgid "There was an error installing packages:"
 msgstr "安装软件包时出错:"
 
@@ -4914,7 +4987,7 @@ msgid ""
 "judgment, or any other consequential loss) arising out of  the use or "
 "inability to use the Software \n"
 "Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
+"occurence of such \n"
 "damages.\n"
 "\n"
 "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
@@ -5032,7 +5105,7 @@ msgstr ""
 "judgment, or any other consequential loss) arising out of  the use or "
 "inability to use the Software \n"
 "Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
+"occurence of such \n"
 "damages.\n"
 "\n"
 "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
@@ -5109,7 +5182,7 @@ msgid "Are you sure you refuse the licence?"
 msgstr "您真的要拒绝这个许可协议吗?"
 
 #: ../../install_steps_interactive.pm_.c:211
-#: ../../install_steps_interactive.pm_.c:1020
+#: ../../install_steps_interactive.pm_.c:1021
 #: ../../standalone/keyboarddrake_.c:31
 msgid "Keyboard"
 msgstr "键盘"
@@ -5312,29 +5385,29 @@ msgstr "请插入软件包选择软盘"
 msgid "Selected size is larger than available space"
 msgstr "您选择的超过可用空间"
 
-#: ../../install_steps_interactive.pm_.c:641
+#: ../../install_steps_interactive.pm_.c:642
 msgid "Type of install"
 msgstr "安装类型"
 
-#: ../../install_steps_interactive.pm_.c:642
+#: ../../install_steps_interactive.pm_.c:643
 msgid ""
 "You haven't selected any group of packages.\n"
 "Please choose the minimal installation you want:"
 msgstr "您没有选择任何的组件, 请选择最小安装"
 
-#: ../../install_steps_interactive.pm_.c:645
+#: ../../install_steps_interactive.pm_.c:646
 msgid "With X"
 msgstr "安装 X Window 系统"
 
-#: ../../install_steps_interactive.pm_.c:647
+#: ../../install_steps_interactive.pm_.c:648
 msgid "With basic documentation (recommended!)"
 msgstr "安装基础文档 (建议)"
 
-#: ../../install_steps_interactive.pm_.c:648
+#: ../../install_steps_interactive.pm_.c:649
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "最小安装 (无包管理工具)"
 
-#: ../../install_steps_interactive.pm_.c:733
+#: ../../install_steps_interactive.pm_.c:734
 msgid ""
 "If you have all the CDs in the list below, click Ok.\n"
 "If you have none of those CDs, click Cancel.\n"
@@ -5344,16 +5417,16 @@ msgstr ""
 "如果您没有任何一张, 点击 取消.\n"
 "如果您只缺其中一些, 不选中它, 然后点击 确认."
 
-#: ../../install_steps_interactive.pm_.c:738
+#: ../../install_steps_interactive.pm_.c:739
 #, c-format
 msgid "Cd-Rom labeled \"%s\""
 msgstr "标号 %s 的CD-ROM "
 
-#: ../../install_steps_interactive.pm_.c:759
+#: ../../install_steps_interactive.pm_.c:760
 msgid "Preparing installation"
 msgstr "正在准备安装"
 
-#: ../../install_steps_interactive.pm_.c:768
+#: ../../install_steps_interactive.pm_.c:769
 #, c-format
 msgid ""
 "Installing package %s\n"
@@ -5362,21 +5435,21 @@ msgstr ""
 "正在安装软件包 %s \n"
 "%d%%"
 
-#: ../../install_steps_interactive.pm_.c:814
+#: ../../install_steps_interactive.pm_.c:815
 msgid "Post-install configuration"
 msgstr "安装后的配置"
 
-#: ../../install_steps_interactive.pm_.c:820
+#: ../../install_steps_interactive.pm_.c:821
 #, c-format
 msgid "Please insert the Boot floppy used in drive %s"
 msgstr "请插入一张启动软盘到驱动器 %s"
 
-#: ../../install_steps_interactive.pm_.c:826
+#: ../../install_steps_interactive.pm_.c:827
 #, c-format
 msgid "Please insert the Update Modules floppy in drive %s"
 msgstr "请在驱动器 %s 中插入一张更新模块软盘"
 
-#: ../../install_steps_interactive.pm_.c:846
+#: ../../install_steps_interactive.pm_.c:847
 msgid ""
 "You now have the opportunity to download encryption software.\n"
 "\n"
@@ -5439,7 +5512,7 @@ msgstr ""
 "Altadena California 91001\n"
 "USA"
 
-#: ../../install_steps_interactive.pm_.c:885
+#: ../../install_steps_interactive.pm_.c:886
 msgid ""
 "You now have the opportunity to download updated packages. These packages\n"
 "have been released after the distribution was released. They may\n"
@@ -5454,154 +5527,154 @@ msgstr ""
 "\n"
 "您是否要安装升级?"
 
-#: ../../install_steps_interactive.pm_.c:900
+#: ../../install_steps_interactive.pm_.c:901
 msgid ""
 "Contacting Mandrake Linux web site to get the list of available mirrors..."
 msgstr "正在连接 Mandrake Linux 网站以获得镜像网站列表..."
 
-#: ../../install_steps_interactive.pm_.c:905
+#: ../../install_steps_interactive.pm_.c:906
 msgid "Choose a mirror from which to get the packages"
 msgstr "选择一个镜象网站来取得程序"
 
-#: ../../install_steps_interactive.pm_.c:914
+#: ../../install_steps_interactive.pm_.c:915
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr "正在连接镜象网站以取得可供安装程序的列表..."
 
-#: ../../install_steps_interactive.pm_.c:942
+#: ../../install_steps_interactive.pm_.c:943
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: ../../install_steps_interactive.pm_.c:947
+#: ../../install_steps_interactive.pm_.c:948
 msgid "Hardware clock set to GMT"
 msgstr "您的系统时钟设定为 GMT"
 
-#: ../../install_steps_interactive.pm_.c:948
+#: ../../install_steps_interactive.pm_.c:949
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用NTP)"
 
-#: ../../install_steps_interactive.pm_.c:955
+#: ../../install_steps_interactive.pm_.c:956
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: ../../install_steps_interactive.pm_.c:989
-#: ../../install_steps_interactive.pm_.c:997
+#: ../../install_steps_interactive.pm_.c:990
+#: ../../install_steps_interactive.pm_.c:998
 msgid "Remote CUPS server"
 msgstr "远程 CUPS 服务器"
 
-#: ../../install_steps_interactive.pm_.c:990
+#: ../../install_steps_interactive.pm_.c:991
 msgid "No printer"
 msgstr "没有打印机"
 
-#: ../../install_steps_interactive.pm_.c:1007
+#: ../../install_steps_interactive.pm_.c:1008
 msgid "Do you have an ISA sound card?"
 msgstr "您有 ISA 声卡吗?"
 
-#: ../../install_steps_interactive.pm_.c:1009
+#: ../../install_steps_interactive.pm_.c:1010
 msgid "Run \"sndconfig\" after installation to configure your sound card"
 msgstr "安装之后运行 \"sndconfig\"来配置您的声卡"
 
-#: ../../install_steps_interactive.pm_.c:1011
+#: ../../install_steps_interactive.pm_.c:1012
 msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr "没有找到声卡. 请在安装之后尝试\"harddrake\"."
 
-#: ../../install_steps_interactive.pm_.c:1016 ../../steps.pm_.c:27
+#: ../../install_steps_interactive.pm_.c:1017 ../../steps.pm_.c:27
 msgid "Summary"
 msgstr "概要"
 
-#: ../../install_steps_interactive.pm_.c:1019
+#: ../../install_steps_interactive.pm_.c:1020
 msgid "Mouse"
 msgstr "鼠标"
 
-#: ../../install_steps_interactive.pm_.c:1021
+#: ../../install_steps_interactive.pm_.c:1022
 msgid "Timezone"
 msgstr "时区"
 
-#: ../../install_steps_interactive.pm_.c:1022 ../../printerdrake.pm_.c:2937
+#: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2937
 #: ../../printerdrake.pm_.c:3026
 msgid "Printer"
 msgstr "打印机"
 
-#: ../../install_steps_interactive.pm_.c:1024
+#: ../../install_steps_interactive.pm_.c:1025
 msgid "ISDN card"
 msgstr "内置 ISDN 卡"
 
-#: ../../install_steps_interactive.pm_.c:1027
-#: ../../install_steps_interactive.pm_.c:1029
+#: ../../install_steps_interactive.pm_.c:1028
+#: ../../install_steps_interactive.pm_.c:1030
 msgid "Sound card"
 msgstr "声卡"
 
-#: ../../install_steps_interactive.pm_.c:1031
+#: ../../install_steps_interactive.pm_.c:1032
 msgid "TV card"
 msgstr "TV 卡"
 
-#: ../../install_steps_interactive.pm_.c:1071
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1100
+#: ../../install_steps_interactive.pm_.c:1072
+#: ../../install_steps_interactive.pm_.c:1097
+#: ../../install_steps_interactive.pm_.c:1101
 msgid "LDAP"
 msgstr "LDAP"
 
-#: ../../install_steps_interactive.pm_.c:1072
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1109
+#: ../../install_steps_interactive.pm_.c:1073
+#: ../../install_steps_interactive.pm_.c:1097
+#: ../../install_steps_interactive.pm_.c:1110
 msgid "NIS"
 msgstr "使用NIS"
 
-#: ../../install_steps_interactive.pm_.c:1073
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1117
-#: ../../install_steps_interactive.pm_.c:1123
+#: ../../install_steps_interactive.pm_.c:1074
+#: ../../install_steps_interactive.pm_.c:1097
+#: ../../install_steps_interactive.pm_.c:1118
+#: ../../install_steps_interactive.pm_.c:1124
 msgid "Windows Domain"
 msgstr "Windows 域"
 
-#: ../../install_steps_interactive.pm_.c:1074
-#: ../../install_steps_interactive.pm_.c:1096
+#: ../../install_steps_interactive.pm_.c:1075
+#: ../../install_steps_interactive.pm_.c:1097
 msgid "Local files"
 msgstr "本机文件"
 
-#: ../../install_steps_interactive.pm_.c:1083
-#: ../../install_steps_interactive.pm_.c:1084 ../../steps.pm_.c:24
+#: ../../install_steps_interactive.pm_.c:1084
+#: ../../install_steps_interactive.pm_.c:1085 ../../steps.pm_.c:24
 msgid "Set root password"
 msgstr "超级用户口令"
 
-#: ../../install_steps_interactive.pm_.c:1085
+#: ../../install_steps_interactive.pm_.c:1086
 msgid "No password"
 msgstr "没有口令"
 
-#: ../../install_steps_interactive.pm_.c:1090
+#: ../../install_steps_interactive.pm_.c:1091
 #, c-format
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr "这个口令太简单了 (至少要有 %d 个字符)"
 
-#: ../../install_steps_interactive.pm_.c:1096 ../../network/modem.pm_.c:49
+#: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:49
 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172
 msgid "Authentication"
 msgstr "认证"
 
-#: ../../install_steps_interactive.pm_.c:1104
+#: ../../install_steps_interactive.pm_.c:1105
 msgid "Authentication LDAP"
 msgstr "LDAP 认证"
 
-#: ../../install_steps_interactive.pm_.c:1105
+#: ../../install_steps_interactive.pm_.c:1106
 msgid "LDAP Base dn"
 msgstr "LDAP 基本目录名 dn"
 
-#: ../../install_steps_interactive.pm_.c:1106
+#: ../../install_steps_interactive.pm_.c:1107
 msgid "LDAP Server"
 msgstr "LDAP 服务器"
 
-#: ../../install_steps_interactive.pm_.c:1112
+#: ../../install_steps_interactive.pm_.c:1113
 msgid "Authentication NIS"
 msgstr "NIS 认证"
 
-#: ../../install_steps_interactive.pm_.c:1113
+#: ../../install_steps_interactive.pm_.c:1114
 msgid "NIS Domain"
 msgstr "NIS 网域"
 
-#: ../../install_steps_interactive.pm_.c:1114
+#: ../../install_steps_interactive.pm_.c:1115
 msgid "NIS Server"
 msgstr "NIS 服务器"
 
-#: ../../install_steps_interactive.pm_.c:1120
+#: ../../install_steps_interactive.pm_.c:1121
 msgid ""
 "For this to work for a W2K PDC, you will probably need to have the admin "
 "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
@@ -5625,19 +5698,19 @@ msgstr ""
 "域名 -U 用户%口令' 填入您的 Windows(tm) 域名, 和管理员的用户名/口令.\n"
 "命令 'wbinfo -t' 会测试您的认证密码是否完好."
 
-#: ../../install_steps_interactive.pm_.c:1122
+#: ../../install_steps_interactive.pm_.c:1123
 msgid "Authentication Windows Domain"
 msgstr "认证 Windows 域"
 
-#: ../../install_steps_interactive.pm_.c:1124
+#: ../../install_steps_interactive.pm_.c:1125
 msgid "Domain Admin User Name"
 msgstr "域管理员用户名"
 
-#: ../../install_steps_interactive.pm_.c:1125
+#: ../../install_steps_interactive.pm_.c:1126
 msgid "Domain Admin Password"
 msgstr "域管理员口令"
 
-#: ../../install_steps_interactive.pm_.c:1160
+#: ../../install_steps_interactive.pm_.c:1161
 msgid ""
 "A custom bootdisk provides a way of booting into your Linux system without\n"
 "depending on the normal bootloader. This is useful if you don't want to "
@@ -5661,19 +5734,19 @@ msgstr ""
 "现在就给您的系统做一张开机软盘, 好吗? \n"
 "在第一个软盘驱动器里放一片软盘, 然后按\"确定\""
 
-#: ../../install_steps_interactive.pm_.c:1176
+#: ../../install_steps_interactive.pm_.c:1177
 msgid "First floppy drive"
 msgstr "第一个软盘驱动器"
 
-#: ../../install_steps_interactive.pm_.c:1177
+#: ../../install_steps_interactive.pm_.c:1178
 msgid "Second floppy drive"
 msgstr "第二个软盘驱动器"
 
-#: ../../install_steps_interactive.pm_.c:1178 ../../printerdrake.pm_.c:2470
+#: ../../install_steps_interactive.pm_.c:1179 ../../printerdrake.pm_.c:2470
 msgid "Skip"
 msgstr "略过"
 
-#: ../../install_steps_interactive.pm_.c:1183
+#: ../../install_steps_interactive.pm_.c:1184
 #, c-format
 msgid ""
 "A custom bootdisk provides a way of booting into your Linux system without\n"
@@ -5695,7 +5768,7 @@ msgstr ""
 "现在就给您的系统做一张开机软盘, 好吗?\n"
 "%s"
 
-#: ../../install_steps_interactive.pm_.c:1189
+#: ../../install_steps_interactive.pm_.c:1190
 msgid ""
 "\n"
 "\n"
@@ -5709,28 +5782,28 @@ msgstr ""
 "很可能无法在一个 1.44 Mb 软盘上创建起动盘,\n"
 "因为 XFS 需要一个很大的驱动程序)."
 
-#: ../../install_steps_interactive.pm_.c:1197
+#: ../../install_steps_interactive.pm_.c:1198
 msgid "Sorry, no floppy drive available"
 msgstr "抱歉，没有可用的软盘机"
 
-#: ../../install_steps_interactive.pm_.c:1201
+#: ../../install_steps_interactive.pm_.c:1202
 msgid "Choose the floppy drive you want to use to make the bootdisk"
 msgstr "选择您要制作开机软盘的软盘机"
 
-#: ../../install_steps_interactive.pm_.c:1205
+#: ../../install_steps_interactive.pm_.c:1206
 #, c-format
 msgid "Insert a floppy in %s"
 msgstr "请插入一张软盘到驱动器 %s"
 
-#: ../../install_steps_interactive.pm_.c:1208
+#: ../../install_steps_interactive.pm_.c:1209
 msgid "Creating bootdisk..."
 msgstr "正在制作开机软盘"
 
-#: ../../install_steps_interactive.pm_.c:1215
+#: ../../install_steps_interactive.pm_.c:1216
 msgid "Preparing bootloader..."
 msgstr "准备开机引导程序"
 
-#: ../../install_steps_interactive.pm_.c:1226
+#: ../../install_steps_interactive.pm_.c:1227
 msgid ""
 "You appear to have an OldWorld or Unknown\n"
 " machine, the yaboot bootloader will not work for you.\n"
@@ -5741,11 +5814,11 @@ msgstr ""
 "yaboot无法开机启动.\n"
 "要继续安装, 你得使用BootX启动"
 
-#: ../../install_steps_interactive.pm_.c:1232
+#: ../../install_steps_interactive.pm_.c:1233
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 吗?"
 
-#: ../../install_steps_interactive.pm_.c:1235
+#: ../../install_steps_interactive.pm_.c:1236
 msgid ""
 "Error installing aboot, \n"
 "try to force installation even if that destroys the first partition?"
@@ -5753,15 +5826,15 @@ msgstr ""
 "安装 aboot 时出错, \n"
 "强迫安装会毁坏第一个分区, 要继续吗?"
 
-#: ../../install_steps_interactive.pm_.c:1242
+#: ../../install_steps_interactive.pm_.c:1243
 msgid "Installing bootloader"
 msgstr "安装引导程序"
 
-#: ../../install_steps_interactive.pm_.c:1248
+#: ../../install_steps_interactive.pm_.c:1249
 msgid "Installation of bootloader failed. The following error occured:"
 msgstr "安装系统引导程序失败，出现下列错误:"
 
-#: ../../install_steps_interactive.pm_.c:1256
+#: ../../install_steps_interactive.pm_.c:1257
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -5777,17 +5850,17 @@ msgstr ""
 " 然后输入: shut-down\n"
 "你将在下次开机时看到引导程序提示."
 
-#: ../../install_steps_interactive.pm_.c:1290
+#: ../../install_steps_interactive.pm_.c:1291
 #: ../../standalone/drakautoinst_.c:79
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "请在驱动器 %s 中插入一张空白软盘"
 
-#: ../../install_steps_interactive.pm_.c:1294
+#: ../../install_steps_interactive.pm_.c:1295
 msgid "Creating auto install floppy..."
 msgstr "正在创建自动安装软盘"
 
-#: ../../install_steps_interactive.pm_.c:1305
+#: ../../install_steps_interactive.pm_.c:1306
 msgid ""
 "Some steps are not completed.\n"
 "\n"
@@ -5797,7 +5870,7 @@ msgstr ""
 "\n"
 "您确信要现在退出吗?"
 
-#: ../../install_steps_interactive.pm_.c:1316
+#: ../../install_steps_interactive.pm_.c:1317
 #, c-format
 msgid ""
 "Congratulations, installation is complete.\n"
@@ -5828,15 +5901,15 @@ msgstr ""
 "\n"
 "关于如何配置您的系统, 请查看 Mandrake Linux 用户手册."
 
-#: ../../install_steps_interactive.pm_.c:1329
+#: ../../install_steps_interactive.pm_.c:1330
 msgid "http://www.mandrakelinux.com/en/90errata.php3"
 msgstr "http://www.mandrakelinux.com/en/90errata.php3"
 
-#: ../../install_steps_interactive.pm_.c:1334
+#: ../../install_steps_interactive.pm_.c:1335
 msgid "Generate auto install floppy"
 msgstr "正在创建自动安装软盘"
 
-#: ../../install_steps_interactive.pm_.c:1336
+#: ../../install_steps_interactive.pm_.c:1337
 msgid ""
 "The auto install can be fully automated if wanted,\n"
 "in that case it will take over the hard drive!!\n"
@@ -5845,15 +5918,15 @@ msgid ""
 "You may prefer to replay the installation.\n"
 msgstr "自动安装能全自动处理硬盘安装, 你可能愿意重现安装.\n"
 
-#: ../../install_steps_interactive.pm_.c:1341
+#: ../../install_steps_interactive.pm_.c:1342
 msgid "Automated"
 msgstr "自动"
 
-#: ../../install_steps_interactive.pm_.c:1341
+#: ../../install_steps_interactive.pm_.c:1342
 msgid "Replay"
 msgstr "重现"
 
-#: ../../install_steps_interactive.pm_.c:1344
+#: ../../install_steps_interactive.pm_.c:1345
 msgid "Save packages selection"
 msgstr "保存软件包选择"
 
@@ -5888,14 +5961,14 @@ msgstr "高级"
 msgid "Basic"
 msgstr "基本"
 
-#: ../../interactive/newt.pm_.c:174 ../../my_gtk.pm_.c:158
+#: ../../interactive/newt.pm_.c:195 ../../my_gtk.pm_.c:158
 #: ../../printerdrake.pm_.c:2124
 msgid "<- Previous"
 msgstr "<-前一步"
 
-#: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176
-#: ../../standalone/drakbackup_.c:4110 ../../standalone/drakbackup_.c:4137
-#: ../../standalone/drakbackup_.c:4167 ../../standalone/drakbackup_.c:4193
+#: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197
+#: ../../standalone/drakbackup_.c:4114 ../../standalone/drakbackup_.c:4141
+#: ../../standalone/drakbackup_.c:4171 ../../standalone/drakbackup_.c:4197
 msgid "Next"
 msgstr "下一步"
 
@@ -6341,7 +6414,7 @@ msgstr "右 \"窗口\" 键"
 msgid "Circular mounts %s\n"
 msgstr "循环装载 %s\n"
 
-#: ../../lvm.pm_.c:98
+#: ../../lvm.pm_.c:103
 msgid "Remove the logical volumes first\n"
 msgstr "先拆卸逻辑卷\n"
 
@@ -6476,15 +6549,15 @@ msgstr "没有"
 msgid "No mouse"
 msgstr "没有鼠标"
 
-#: ../../mouse.pm_.c:488
+#: ../../mouse.pm_.c:486
 msgid "Please test the mouse"
 msgstr "请测试您的鼠标."
 
-#: ../../mouse.pm_.c:489
+#: ../../mouse.pm_.c:487
 msgid "To activate the mouse,"
 msgstr "要激活鼠标,"
 
-#: ../../mouse.pm_.c:490
+#: ../../mouse.pm_.c:488
 msgid "MOVE YOUR WHEEL!"
 msgstr "转动滚轮!"
 
@@ -6520,11 +6593,11 @@ msgstr "收缩分类树"
 msgid "Toggle between flat and group sorted"
 msgstr "切换平铺或分组排列"
 
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
+#: ../../network/adsl.pm_.c:23 ../../network/ethernet.pm_.c:36
 msgid "Connect to the Internet"
 msgstr "连接到互联网"
 
-#: ../../network/adsl.pm_.c:20
+#: ../../network/adsl.pm_.c:24
 msgid ""
 "The most common way to connect with adsl is pppoe.\n"
 "Some connections use pptp, a few ones use dhcp.\n"
@@ -6534,23 +6607,19 @@ msgstr ""
 "不过, 确实有一些连接是只用 dhcp. \n"
 "如果您没有把握就选择 '使用 pppoe'"
 
-#: ../../network/adsl.pm_.c:22
+#: ../../network/adsl.pm_.c:26
 msgid "Alcatel speedtouch usb"
 msgstr "Alcatel speedtouch usb"
 
-#: ../../network/adsl.pm_.c:22
-msgid "ECI Hi-Focus"
-msgstr "ECI Hi-Focus"
-
-#: ../../network/adsl.pm_.c:22
+#: ../../network/adsl.pm_.c:26
 msgid "use dhcp"
 msgstr "使用 dhcp"
 
-#: ../../network/adsl.pm_.c:22
+#: ../../network/adsl.pm_.c:26
 msgid "use pppoe"
 msgstr "使用 pppoe"
 
-#: ../../network/adsl.pm_.c:22
+#: ../../network/adsl.pm_.c:26
 msgid "use pptp"
 msgstr "使用 pptp"
 
@@ -6650,7 +6719,7 @@ msgstr "请选择用哪个网卡连接互联网."
 msgid "no network card found"
 msgstr "找不到网络卡"
 
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:365
+#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:362
 msgid "Configuring network"
 msgstr "正在配置网络"
 
@@ -6666,15 +6735,15 @@ msgstr ""
 "您的主机名称必需是个完全限定主机名字，\n"
 "例如 ``mybox.mylab.myco.com''"
 
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:370
+#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:367
 msgid "Host name"
 msgstr "主机名字"
 
 #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:94 ../../network/netconnect.pm_.c:108
-#: ../../network/netconnect.pm_.c:163 ../../network/netconnect.pm_.c:178
-#: ../../network/netconnect.pm_.c:205 ../../network/netconnect.pm_.c:228
-#: ../../network/netconnect.pm_.c:236
+#: ../../network/netconnect.pm_.c:90 ../../network/netconnect.pm_.c:104
+#: ../../network/netconnect.pm_.c:159 ../../network/netconnect.pm_.c:174
+#: ../../network/netconnect.pm_.c:201 ../../network/netconnect.pm_.c:224
+#: ../../network/netconnect.pm_.c:232
 msgid "Network Configuration Wizard"
 msgstr "网络配置"
 
@@ -6717,8 +6786,8 @@ msgid "Old configuration (isdn4net)"
 msgstr "老配置(isdn4net)"
 
 #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
+#: ../../network/isdn.pm_.c:200 ../../network/isdn.pm_.c:206
+#: ../../network/isdn.pm_.c:213 ../../network/isdn.pm_.c:223
 msgid "ISDN Configuration"
 msgstr "ISDN 配置"
 
@@ -6754,23 +6823,28 @@ msgstr ""
 msgid "Which protocol do you want to use?"
 msgstr "您将使用哪种协议?"
 
-#: ../../network/isdn.pm_.c:199
+#: ../../network/isdn.pm_.c:200
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
+
+#: ../../network/isdn.pm_.c:207
 msgid "What kind of card do you have?"
 msgstr "请问您适配卡的种类?"
 
-#: ../../network/isdn.pm_.c:200
+#: ../../network/isdn.pm_.c:208
 msgid "I don't know"
 msgstr "我不知道"
 
-#: ../../network/isdn.pm_.c:200
+#: ../../network/isdn.pm_.c:208
 msgid "ISA / PCMCIA"
 msgstr "ISA / PCMCIA"
 
-#: ../../network/isdn.pm_.c:200
+#: ../../network/isdn.pm_.c:208
 msgid "PCI"
 msgstr "PCI"
 
-#: ../../network/isdn.pm_.c:206
+#: ../../network/isdn.pm_.c:214
 msgid ""
 "\n"
 "If you have an ISA card, the values on the next screen should be right.\n"
@@ -6783,19 +6857,19 @@ msgstr ""
 "\n"
 "如果您的卡 是 PCMCIA 卡, 您必须知道它的 irq 和 io.\n"
 
-#: ../../network/isdn.pm_.c:210
+#: ../../network/isdn.pm_.c:218
 msgid "Abort"
 msgstr "中止"
 
-#: ../../network/isdn.pm_.c:210
+#: ../../network/isdn.pm_.c:218
 msgid "Continue"
 msgstr "继续"
 
-#: ../../network/isdn.pm_.c:216
+#: ../../network/isdn.pm_.c:224
 msgid "Which is your ISDN card?"
 msgstr "您的 ISDN 卡是哪个?"
 
-#: ../../network/isdn.pm_.c:235
+#: ../../network/isdn.pm_.c:243
 msgid ""
 "I have detected an ISDN PCI card, but I don't know its type. Please select a "
 "PCI card on the next screen."
@@ -6803,7 +6877,7 @@ msgstr ""
 "我探测到一块 ISDN PCI 卡, 不过无法识别它的型号. 请在下一屏幕里\n"
 "选择您的 PCI 卡"
 
-#: ../../network/isdn.pm_.c:244
+#: ../../network/isdn.pm_.c:252
 msgid "No ISDN PCI card found. Please select one on the next screen."
 msgstr "没有探测到 ISDN PCI 卡. 请在下一屏幕里挑选一种."
 
@@ -6855,7 +6929,7 @@ msgstr "首选 DNS 服务器"
 msgid "Second DNS Server (optional)"
 msgstr "第二个 备选DNS 服务器"
 
-#: ../../network/netconnect.pm_.c:33
+#: ../../network/netconnect.pm_.c:29
 msgid ""
 "\n"
 "You can disconnect or reconfigure your connection."
@@ -6863,7 +6937,7 @@ msgstr ""
 "\n"
 "您可以切断到互联网的连接,或重新配置网络连接"
 
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
+#: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32
 msgid ""
 "\n"
 "You can reconfigure your connection."
@@ -6871,11 +6945,11 @@ msgstr ""
 "\n"
 "您可以重新配置互联网连接"
 
-#: ../../network/netconnect.pm_.c:33
+#: ../../network/netconnect.pm_.c:29
 msgid "You are currently connected to internet."
 msgstr "您现在正连接到互联网"
 
-#: ../../network/netconnect.pm_.c:36
+#: ../../network/netconnect.pm_.c:32
 msgid ""
 "\n"
 "You can connect to Internet or reconfigure your connection."
@@ -6883,32 +6957,32 @@ msgstr ""
 "\n"
 "连接到互联网, 或重新配置网络连接"
 
-#: ../../network/netconnect.pm_.c:36
+#: ../../network/netconnect.pm_.c:32
 msgid "You are not currently connected to Internet."
 msgstr "您现在没有连接到互联网"
 
-#: ../../network/netconnect.pm_.c:40
+#: ../../network/netconnect.pm_.c:36
 msgid "Connect"
 msgstr "连接"
 
-#: ../../network/netconnect.pm_.c:42
+#: ../../network/netconnect.pm_.c:38
 msgid "Disconnect"
 msgstr "断开连接"
 
-#: ../../network/netconnect.pm_.c:44
+#: ../../network/netconnect.pm_.c:40
 msgid "Configure the connection"
 msgstr "配置连接"
 
-#: ../../network/netconnect.pm_.c:49
+#: ../../network/netconnect.pm_.c:45
 msgid "Internet connection & configuration"
 msgstr "互联网连接和配置"
 
-#: ../../network/netconnect.pm_.c:99
+#: ../../network/netconnect.pm_.c:95
 #, c-format
 msgid "We are now going to configure the %s connection."
 msgstr "现在配置%s网络连接."
 
-#: ../../network/netconnect.pm_.c:108
+#: ../../network/netconnect.pm_.c:104
 #, c-format
 msgid ""
 "\n"
@@ -6927,12 +7001,12 @@ msgstr ""
 "\n"
 "按 完成 继续."
 
-#: ../../network/netconnect.pm_.c:137 ../../network/netconnect.pm_.c:255
-#: ../../network/netconnect.pm_.c:275 ../../network/tools.pm_.c:63
+#: ../../network/netconnect.pm_.c:133 ../../network/netconnect.pm_.c:251
+#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:63
 msgid "Network Configuration"
 msgstr "网络配置"
 
-#: ../../network/netconnect.pm_.c:138
+#: ../../network/netconnect.pm_.c:134
 msgid ""
 "Because you are doing a network installation, your network is already "
 "configured.\n"
@@ -6942,7 +7016,7 @@ msgstr ""
 "你正在安装网络,你的网络已经配置好.\n"
 "点击 确定 保存配置, 或 取消 重新配置网络.\n"
 
-#: ../../network/netconnect.pm_.c:164
+#: ../../network/netconnect.pm_.c:160
 msgid ""
 "Welcome to The Network Configuration Wizard.\n"
 "\n"
@@ -6954,72 +7028,72 @@ msgstr ""
 "配置internet/网络连接.\n"
 "如果你不想自动检测, 不选 检验盒.\n"
 
-#: ../../network/netconnect.pm_.c:170
+#: ../../network/netconnect.pm_.c:166
 msgid "Choose the profile to configure"
 msgstr "选择要配置的profile"
 
-#: ../../network/netconnect.pm_.c:171
+#: ../../network/netconnect.pm_.c:167
 msgid "Use auto detection"
 msgstr "使用自动检测"
 
-#: ../../network/netconnect.pm_.c:172 ../../printerdrake.pm_.c:3151
+#: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3151
 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277
 #: ../../standalone/drakfloppy_.c:145
 msgid "Expert Mode"
 msgstr "专家模式"
 
-#: ../../network/netconnect.pm_.c:178 ../../printerdrake.pm_.c:386
+#: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:386
 msgid "Detecting devices..."
 msgstr "正在探测设备..."
 
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
+#: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194
 msgid "Normal modem connection"
 msgstr "配置普通调制解调器连接"
 
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
+#: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194
 #, c-format
 msgid "detected on port %s"
 msgstr "检测串口 %s"
 
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
+#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
 msgid "ISDN connection"
 msgstr "配置 ISDN 连接"
 
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
+#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
 #, c-format
 msgid "detected %s"
 msgstr "检测 %s"
 
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
+#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
 msgid "ADSL connection"
 msgstr "ADSL连接"
 
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
+#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
 #, c-format
 msgid "detected on interface %s"
 msgstr "网络接口卡 %s"
 
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
+#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
 msgid "Cable connection"
 msgstr "配置有线电缆连接"
 
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
+#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
 msgid "cable connection detected"
 msgstr "检测到有线电缆连接"
 
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
+#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
 msgid "LAN connection"
 msgstr "配置局域网连接"
 
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
+#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
 msgid "ethernet card(s) detected"
 msgstr "检测到网卡"
 
-#: ../../network/netconnect.pm_.c:205
+#: ../../network/netconnect.pm_.c:201
 msgid "Choose the connection you want to configure"
 msgstr "选择您想要配置的连接"
 
-#: ../../network/netconnect.pm_.c:229
+#: ../../network/netconnect.pm_.c:225
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
 "Choose the one you want to use.\n"
@@ -7029,23 +7103,23 @@ msgstr ""
 "选择你要使用的一种.\n"
 "\n"
 
-#: ../../network/netconnect.pm_.c:230
+#: ../../network/netconnect.pm_.c:226
 msgid "Internet connection"
 msgstr "共享互联网连接"
 
-#: ../../network/netconnect.pm_.c:236
+#: ../../network/netconnect.pm_.c:232
 msgid "Do you want to start the connection at boot?"
 msgstr "您是否希望一开机就启动连接?"
 
-#: ../../network/netconnect.pm_.c:250
+#: ../../network/netconnect.pm_.c:246
 msgid "Network configuration"
 msgstr "网络配置"
 
-#: ../../network/netconnect.pm_.c:251
+#: ../../network/netconnect.pm_.c:247
 msgid "The network needs to be restarted"
 msgstr "网络需要重新启动"
 
-#: ../../network/netconnect.pm_.c:255
+#: ../../network/netconnect.pm_.c:251
 #, c-format
 msgid ""
 "A problem occured while restarting the network: \n"
@@ -7056,20 +7130,20 @@ msgstr ""
 "\n"
 "%s"
 
-#: ../../network/netconnect.pm_.c:265
+#: ../../network/netconnect.pm_.c:261
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
 "The configuration will now be applied to your system.\n"
 "\n"
 msgstr "祝贺,网络和internet配置完成.\n"
 
-#: ../../network/netconnect.pm_.c:269
+#: ../../network/netconnect.pm_.c:265
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
 "avoid any hostname-related problems."
 msgstr "建议重启动 X 环境以避免任何于主机名有关的问题. "
 
-#: ../../network/netconnect.pm_.c:270
+#: ../../network/netconnect.pm_.c:266
 msgid ""
 "Problems occured during configuration.\n"
 "Test your connection via net_monitor or mcc. If your connection doesn't "
@@ -7078,7 +7152,7 @@ msgstr ""
 "配置过程中出现错误.\n"
 "请从网络监视器或者配置中心测试您的连接. 如果它不工作, 可以重新配置."
 
-#: ../../network/network.pm_.c:294
+#: ../../network/network.pm_.c:291
 msgid ""
 "WARNING: this device has been previously configured to connect to the "
 "Internet.\n"
@@ -7089,7 +7163,7 @@ msgstr ""
 "要保留现有的配置只要选择 确定.\n"
 "修改以下的项目将覆盖原有的设定.."
 
-#: ../../network/network.pm_.c:299
+#: ../../network/network.pm_.c:296
 msgid ""
 "Please enter the IP configuration for this machine.\n"
 "Each item should be entered as an IP address in dotted-decimal\n"
@@ -7099,42 +7173,42 @@ msgstr ""
 "下列项目要求输入以句点分隔十进制格式表示的 IP 地址.\n"
 " (例如 192.168.1.1) "
 
-#: ../../network/network.pm_.c:309 ../../network/network.pm_.c:310
+#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
 #, c-format
 msgid "Configuring network device %s"
 msgstr "正在配置网络设备 %s"
 
-#: ../../network/network.pm_.c:310
+#: ../../network/network.pm_.c:307
 #, c-format
 msgid " (driver %s)"
 msgstr "(驱动 %s)"
 
-#: ../../network/network.pm_.c:312 ../../standalone/drakconnect_.c:231
+#: ../../network/network.pm_.c:309 ../../standalone/drakconnect_.c:231
 #: ../../standalone/drakconnect_.c:467
 msgid "IP address"
 msgstr "IP 地址"
 
-#: ../../network/network.pm_.c:313 ../../standalone/drakconnect_.c:468
+#: ../../network/network.pm_.c:310 ../../standalone/drakconnect_.c:468
 msgid "Netmask"
 msgstr "子网掩码:"
 
-#: ../../network/network.pm_.c:314
+#: ../../network/network.pm_.c:311
 msgid "(bootp/dhcp)"
 msgstr "(bootp/dhcp)"
 
-#: ../../network/network.pm_.c:314
+#: ../../network/network.pm_.c:311
 msgid "Automatic IP"
 msgstr "自动设置 IP"
 
-#: ../../network/network.pm_.c:315
+#: ../../network/network.pm_.c:312
 msgid "Start at boot"
 msgstr "开机时启动"
 
-#: ../../network/network.pm_.c:336 ../../printerdrake.pm_.c:860
+#: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:860
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 地址的格式应该是 1.2.3.4"
 
-#: ../../network/network.pm_.c:366
+#: ../../network/network.pm_.c:363
 msgid ""
 "Please enter your host name.\n"
 "Your host name should be a fully-qualified host name,\n"
@@ -7145,42 +7219,52 @@ msgstr ""
 "您的主机名称必需是个完全限定的名称，例如 ``mybox.mylab.myco.com''\n"
 "如果您有网关的话，也请输入其 IP 地址"
 
-#: ../../network/network.pm_.c:371
+#: ../../network/network.pm_.c:368
 msgid "DNS server"
 msgstr "DNS 服务器"
 
-#: ../../network/network.pm_.c:372
+#: ../../network/network.pm_.c:369
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "网关 (如 %s )"
 
-#: ../../network/network.pm_.c:374
+#: ../../network/network.pm_.c:371
 msgid "Gateway device"
 msgstr "网关设备"
 
-#: ../../network/network.pm_.c:386
+#: ../../network/network.pm_.c:376
+#, fuzzy
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP 地址的格式应该是 1.2.3.4"
+
+#: ../../network/network.pm_.c:380
+#, fuzzy
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP 地址的格式应该是 1.2.3.4"
+
+#: ../../network/network.pm_.c:394
 msgid "Proxies configuration"
 msgstr "代理服务器配置"
 
-#: ../../network/network.pm_.c:387
+#: ../../network/network.pm_.c:395
 msgid "HTTP proxy"
 msgstr "HTTP 代理服务器"
 
-#: ../../network/network.pm_.c:388
+#: ../../network/network.pm_.c:396
 msgid "FTP proxy"
 msgstr "FTP 代理服务器"
 
-#: ../../network/network.pm_.c:389
+#: ../../network/network.pm_.c:397
 msgid "Track network card id (useful for laptops)"
 msgstr "记录网卡标志"
 
-#: ../../network/network.pm_.c:392
+#: ../../network/network.pm_.c:400
 msgid "Proxy should be http://..."
 msgstr "代理服务器应该是象 http://..."
 
-#: ../../network/network.pm_.c:393
-msgid "Proxy should be ftp://..."
-msgstr "代理服务器应该是象 ftp://..."
+#: ../../network/network.pm_.c:401 ../../proxy.pm_.c:65
+msgid "Url should begin with 'ftp:' or 'http:'"
+msgstr "Url 应该是以 'ftp:' 或 'http:'开头"
 
 #: ../../network/shorewall.pm_.c:24
 msgid "Firewalling configuration detected!"
@@ -8672,7 +8756,7 @@ msgstr "正在\"%s\"打印机上打印"
 #: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2353
 #: ../../printerdrake.pm_.c:2354 ../../printerdrake.pm_.c:2355
 #: ../../printerdrake.pm_.c:3400 ../../standalone/drakTermServ_.c:248
-#: ../../standalone/drakbackup_.c:1558 ../../standalone/drakbackup_.c:4206
+#: ../../standalone/drakbackup_.c:1562 ../../standalone/drakbackup_.c:4210
 #: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705
 #: ../../standalone/drakfont_.c:1014
 msgid "Close"
@@ -9203,10 +9287,6 @@ msgid ""
 "Leave it blank if you don't want an ftp proxy"
 msgstr "输入 FTP 代理信息"
 
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:' or 'http:'"
-msgstr "Url 应该是以 'ftp:' 或 'http:'开头"
-
 #: ../../proxy.pm_.c:79
 msgid ""
 "Please enter proxy login and password, if any.\n"
@@ -9252,6 +9332,41 @@ msgstr "mkraid 失败 (可能缺少 raidtools ?)"
 msgid "Not enough partitions for RAID level %d\n"
 msgstr "没有足够的分区建立 %d 级的硬盘阵列\n"
 
+#: ../../security/main.pm_.c:66
+msgid "Security Level:"
+msgstr "安全级别:"
+
+#: ../../security/main.pm_.c:74
+#, fuzzy
+msgid "Security Alerts:"
+msgstr "安全级别"
+
+#: ../../security/main.pm_.c:83
+msgid "Security Administrator:"
+msgstr "安全管理员:"
+
+#: ../../security/main.pm_.c:114 ../../security/main.pm_.c:150
+#, fuzzy, c-format
+msgid " (default: %s)"
+msgstr " (缺省)"
+
+#: ../../security/main.pm_.c:118 ../../security/main.pm_.c:154
+#: ../../security/main.pm_.c:179
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need explanations, click on Help.\n"
+msgstr ""
+
+#: ../../security/main.pm_.c:256
+#, fuzzy
+msgid "Please wait, setting security level..."
+msgstr "请选择期望的安全级别"
+
+#: ../../security/main.pm_.c:262
+#, fuzzy
+msgid "Please wait, setting security options..."
+msgstr "正在准备安装"
+
 #: ../../services.pm_.c:14
 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
 msgstr "启动ALSA语音系统"
@@ -9532,7 +9647,7 @@ msgstr "互联网"
 msgid "File sharing"
 msgstr "文件共享"
 
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1742
+#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1746
 msgid "System"
 msgstr "系统"
 
@@ -9622,7 +9737,7 @@ msgstr "充分利用互联网资源"
 
 #: ../../share/advertising/03-internet.pl_.c:10
 msgid ""
-"Mandrake Linux 9.0 has selected the best softwares for you. Surf the Web and "
+"Mandrake Linux 9.0 has selected the best software for you. Surf the Web and "
 "view animations with Mozilla and Konqueror, or read your mail and handle "
 "your personal information with Evolution and Kmail"
 msgstr ""
@@ -9672,7 +9787,7 @@ msgstr "用户界面"
 
 #: ../../share/advertising/07-desktop.pl_.c:10
 msgid ""
-"Mandrake Linux 9.0 provides you with 11 user interfaces which can be fully "
+"Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully "
 "modified: KDE 3, Gnome 2, WindowMaker, ..."
 msgstr ""
 "Mandrake Linux 9.0 提供 11 种不同的全面改进的用户界面: KDE 3, Gnome 2, "
@@ -9698,7 +9813,7 @@ msgstr "把您的机器变成可靠运行的服务器"
 
 #: ../../share/advertising/09-server.pl_.c:10
 msgid ""
-"Transform your machine into a powerful Linux server in a few clicks of your "
+"Transform your machine into a powerful Linux server with a few clicks of your "
 "mouse: Web server, mail, firewall, router, file and print server, ..."
 msgstr ""
 "鼠标点几点, 您的机器就能变成一台强大的 Linux 服务器: 提供网站服务, 电子邮件, "
@@ -9716,7 +9831,7 @@ msgstr "MandrakeSecurity 系列包括多网络防火墙 (M.N.F.)产品"
 
 #: ../../share/advertising/10-mnf.pl_.c:11
 msgid ""
-"This firewall product includes network features which allow you to fulfill "
+"This firewall product includes network features that allow you to fulfill "
 "all your security needs"
 msgstr "这个防火墙产品提供的网络功能将满足您所有的安全性要求"
 
@@ -9731,7 +9846,7 @@ msgstr "MandrakeSoft 官方网上商店"
 #: ../../share/advertising/11-mdkstore.pl_.c:10
 msgid ""
 "Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available online on our e-store:"
+"other \"goodies,\" are available online on our e-store:"
 msgstr ""
 "全套的 Linux 解决方案, 各种特别促销的产品和好玩意儿, 就在我们的在线商场"
 
@@ -9785,8 +9900,8 @@ msgstr "您的问题可以通过 MandrakeSoft 的在线支持平台找到答案"
 #: ../../share/advertising/14-mdkexpert.pl_.c:11
 msgid ""
 "Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help your others by becoming a recognized Expert on the "
-"online technical support website:"
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
 msgstr ""
 "在线加入 MandrakeSoft 支持队伍和 Linux 社团, 分享您的知识, 帮助他人,在 "
 "MandrakeSoft 的在线技术支持网站, 您可以成为众人瞩目的专家:"
@@ -9827,11 +9942,11 @@ msgstr ""
 msgid "Installing packages..."
 msgstr "正在安装程序 ..."
 
-#: ../../standalone/XFdrake_.c:145
+#: ../../standalone/XFdrake_.c:147
 msgid "Please log out and then use Ctrl-Alt-BackSpace"
 msgstr "请退出, 然后同时按 Ctrl-Alt-BackSpace"
 
-#: ../../standalone/XFdrake_.c:149
+#: ../../standalone/XFdrake_.c:151
 #, c-format
 msgid "Please relog into %s to activate the changes"
 msgstr "请重新登录到 %s 使您所做的更改生效"
@@ -9872,16 +9987,6 @@ msgstr "增加/删除用户"
 msgid "Add/Del Clients"
 msgstr "增加/删除用户"
 
-#: ../../standalone/drakTermServ_.c:246 ../../standalone/drakbackup_.c:3928
-#: ../../standalone/drakbackup_.c:3961 ../../standalone/drakbackup_.c:3987
-#: ../../standalone/drakbackup_.c:4014 ../../standalone/drakbackup_.c:4041
-#: ../../standalone/drakbackup_.c:4080 ../../standalone/drakbackup_.c:4101
-#: ../../standalone/drakbackup_.c:4128 ../../standalone/drakbackup_.c:4158
-#: ../../standalone/drakbackup_.c:4184 ../../standalone/drakbackup_.c:4209
-#: ../../standalone/drakfont_.c:700
-msgid "Help"
-msgstr "帮助"
-
 #: ../../standalone/drakTermServ_.c:436
 msgid "Boot Floppy"
 msgstr "开机软盘"
@@ -9930,48 +10035,64 @@ msgstr "增加用户 -->"
 msgid "<-- Del User"
 msgstr "<-- 删除用户"
 
-#: ../../standalone/drakTermServ_.c:703
+#: ../../standalone/drakTermServ_.c:694
+#, fuzzy
+msgid "No net boot images created!"
+msgstr "网络起动磁盘镜像"
+
+#: ../../standalone/drakTermServ_.c:710
 msgid "Add Client -->"
 msgstr "添加客户 -->"
 
-#: ../../standalone/drakTermServ_.c:735
+#: ../../standalone/drakTermServ_.c:742
 msgid "<-- Del Client"
 msgstr "<-- 删除客户"
 
-#: ../../standalone/drakTermServ_.c:741
+#: ../../standalone/drakTermServ_.c:748
 msgid "dhcpd Config..."
 msgstr "dhcpd 配置..."
 
-#: ../../standalone/drakTermServ_.c:870
+#: ../../standalone/drakTermServ_.c:873
+#, fuzzy
+msgid "dhcpd Server Configuration"
+msgstr "高级配置"
+
+#: ../../standalone/drakTermServ_.c:874
+msgid ""
+"Most of these values were extracted\n"
+"from your running system. You can modify as needed."
+msgstr ""
+
+#: ../../standalone/drakTermServ_.c:875
 msgid "Write Config"
 msgstr "写入配置"
 
-#: ../../standalone/drakTermServ_.c:960
+#: ../../standalone/drakTermServ_.c:965
 msgid "Please insert floppy disk:"
 msgstr "请插入一张启动软盘:"
 
-#: ../../standalone/drakTermServ_.c:964
+#: ../../standalone/drakTermServ_.c:969
 msgid "Couldn't access the floppy!"
 msgstr "无法访问软盘!"
 
-#: ../../standalone/drakTermServ_.c:966
+#: ../../standalone/drakTermServ_.c:971
 msgid "Floppy can be removed now"
 msgstr "现在可以取出软盘了"
 
-#: ../../standalone/drakTermServ_.c:969
+#: ../../standalone/drakTermServ_.c:974
 msgid "No floppy drive available!"
 msgstr "没有可用的软盘驱动器!"
 
-#: ../../standalone/drakTermServ_.c:978
+#: ../../standalone/drakTermServ_.c:983
 #, c-format
 msgid "Etherboot ISO image is %s"
 msgstr "Etherboot ISO 镜像是 %s"
 
-#: ../../standalone/drakTermServ_.c:980
+#: ../../standalone/drakTermServ_.c:985
 msgid "Something went wrong! - Is mkisofs installed?"
 msgstr "发生错误! - mkisofs 安装了吗?"
 
-#: ../../standalone/drakTermServ_.c:999
+#: ../../standalone/drakTermServ_.c:1004
 msgid "Need to create /etc/dhcpd.conf first!"
 msgstr "需要先创建 /etc/dhcpd.conf 文件!"
 
@@ -10112,12 +10233,12 @@ msgstr ""
 "                    DrakBackup 详细报告\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:763 ../../standalone/drakbackup_.c:833
-#: ../../standalone/drakbackup_.c:887
+#: ../../standalone/drakbackup_.c:763 ../../standalone/drakbackup_.c:836
+#: ../../standalone/drakbackup_.c:891
 msgid "Total progess"
 msgstr "总进度"
 
-#: ../../standalone/drakbackup_.c:815
+#: ../../standalone/drakbackup_.c:818
 #, c-format
 msgid ""
 "%s exists, delete?\n"
@@ -10130,41 +10251,41 @@ msgstr ""
 "警告: 如果您曾经做过这个步骤, 您可能需要\n"
 "从服务器的的 authorized_keys 删除该项目."
 
-#: ../../standalone/drakbackup_.c:824
+#: ../../standalone/drakbackup_.c:827
 msgid "This may take a moment to generate the keys."
 msgstr "生成一个钥匙需要一些时间."
 
-#: ../../standalone/drakbackup_.c:831
+#: ../../standalone/drakbackup_.c:834
 #, c-format
 msgid "ERROR: Cannot spawn %s."
 msgstr "错误: 无法进行 %s."
 
-#: ../../standalone/drakbackup_.c:848
+#: ../../standalone/drakbackup_.c:851
 #, c-format
 msgid "No password prompt on %s at port %s"
 msgstr "%s 上的端口 %s 没有口令提示"
 
-#: ../../standalone/drakbackup_.c:849
+#: ../../standalone/drakbackup_.c:852
 #, c-format
 msgid "Bad password on %s"
 msgstr "%s 口令无效"
 
-#: ../../standalone/drakbackup_.c:850
+#: ../../standalone/drakbackup_.c:853
 #, c-format
 msgid "Permission denied transferring %s to %s"
 msgstr "没有权限把 %s 迁移到 %s"
 
-#: ../../standalone/drakbackup_.c:851
+#: ../../standalone/drakbackup_.c:854
 #, c-format
 msgid "Can't find %s on %s"
 msgstr "没有 %s 在 %s 上"
 
-#: ../../standalone/drakbackup_.c:854
+#: ../../standalone/drakbackup_.c:857
 #, c-format
 msgid "%s not responding"
 msgstr "%s 没有回应"
 
-#: ../../standalone/drakbackup_.c:858
+#: ../../standalone/drakbackup_.c:861
 #, c-format
 msgid ""
 "Transfer successful\n"
@@ -10181,64 +10302,64 @@ msgstr ""
 "\n"
 "这样不会提问口令."
 
-#: ../../standalone/drakbackup_.c:901
+#: ../../standalone/drakbackup_.c:905
 msgid "WebDAV remote site already in sync!"
 msgstr "WebDAV 远程站点已经同步!"
 
-#: ../../standalone/drakbackup_.c:905
+#: ../../standalone/drakbackup_.c:909
 msgid "WebDAV transfer failed!"
 msgstr "WebDAV 传输失败!"
 
-#: ../../standalone/drakbackup_.c:926
+#: ../../standalone/drakbackup_.c:930
 msgid "No CDR/DVDR in drive!"
 msgstr "驱动器里没有 CDR/DVDR"
 
-#: ../../standalone/drakbackup_.c:930
+#: ../../standalone/drakbackup_.c:934
 msgid "Does not appear to be recordable media!"
 msgstr "介质不象是可以写入的!"
 
-#: ../../standalone/drakbackup_.c:934
+#: ../../standalone/drakbackup_.c:938
 msgid "Not erasable media!"
 msgstr "介质不能清除!"
 
-#: ../../standalone/drakbackup_.c:973
+#: ../../standalone/drakbackup_.c:977
 msgid "This may take a moment to erase the media."
 msgstr "清空介质需要一些时间."
 
-#: ../../standalone/drakbackup_.c:1058
+#: ../../standalone/drakbackup_.c:1062
 msgid "Permission problem accessing CD."
 msgstr "没有适当的权限读写 CD."
 
-#: ../../standalone/drakbackup_.c:1085
+#: ../../standalone/drakbackup_.c:1089
 #, c-format
 msgid "No tape in %s!"
 msgstr "%s 里没有磁带!"
 
-#: ../../standalone/drakbackup_.c:1197 ../../standalone/drakbackup_.c:1246
+#: ../../standalone/drakbackup_.c:1201 ../../standalone/drakbackup_.c:1250
 msgid "Backup system files..."
 msgstr "备份系统文件..."
 
-#: ../../standalone/drakbackup_.c:1247 ../../standalone/drakbackup_.c:1314
+#: ../../standalone/drakbackup_.c:1251 ../../standalone/drakbackup_.c:1318
 msgid "Hard Disk Backup files..."
 msgstr "备份硬盘文件..."
 
-#: ../../standalone/drakbackup_.c:1259
+#: ../../standalone/drakbackup_.c:1263
 msgid "Backup User files..."
 msgstr "备份用户文件..."
 
-#: ../../standalone/drakbackup_.c:1260
+#: ../../standalone/drakbackup_.c:1264
 msgid "Hard Disk Backup Progress..."
 msgstr "硬盘文件备份进度..."
 
-#: ../../standalone/drakbackup_.c:1313
+#: ../../standalone/drakbackup_.c:1317
 msgid "Backup Other files..."
 msgstr "备份其它文件..."
 
-#: ../../standalone/drakbackup_.c:1319
+#: ../../standalone/drakbackup_.c:1323
 msgid "No changes to backup!"
 msgstr "没有需要备份的修改!"
 
-#: ../../standalone/drakbackup_.c:1335 ../../standalone/drakbackup_.c:1358
+#: ../../standalone/drakbackup_.c:1339 ../../standalone/drakbackup_.c:1362
 #, c-format
 msgid ""
 "\n"
@@ -10249,7 +10370,7 @@ msgstr ""
 "Drakbackup 使用 %s:\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:1342
+#: ../../standalone/drakbackup_.c:1346
 #, c-format
 msgid ""
 "file list sent by FTP: %s\n"
@@ -10258,7 +10379,7 @@ msgstr ""
 "通过 FTP 发送的文件列表: %s\n"
 " "
 
-#: ../../standalone/drakbackup_.c:1345
+#: ../../standalone/drakbackup_.c:1349
 msgid ""
 "\n"
 " FTP connection problem: It was not possible to send your backup files by "
@@ -10267,7 +10388,7 @@ msgstr ""
 "\n"
 "FTP 连接错误: 无法通过 FTP 传送您的备份文件.\n"
 
-#: ../../standalone/drakbackup_.c:1363
+#: ../../standalone/drakbackup_.c:1367
 msgid ""
 "\n"
 "Drakbackup activities via CD:\n"
@@ -10277,7 +10398,7 @@ msgstr ""
 "Drakbackup 的光盘操作:\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:1368
+#: ../../standalone/drakbackup_.c:1372
 msgid ""
 "\n"
 "Drakbackup activities via tape:\n"
@@ -10287,24 +10408,24 @@ msgstr ""
 "Drakbackup 的磁带操作:\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:1377
+#: ../../standalone/drakbackup_.c:1381
 msgid " Error during mail sending. \n"
 msgstr "发送电子邮件出错. \n"
 
-#: ../../standalone/drakbackup_.c:1402
+#: ../../standalone/drakbackup_.c:1406
 msgid "Can't create catalog!"
 msgstr "无法创建 catalog!"
 
-#: ../../standalone/drakbackup_.c:1515 ../../standalone/drakbackup_.c:1526
+#: ../../standalone/drakbackup_.c:1519 ../../standalone/drakbackup_.c:1530
 #: ../../standalone/drakfont_.c:1004
 msgid "File Selection"
 msgstr "选择文件"
 
-#: ../../standalone/drakbackup_.c:1554
+#: ../../standalone/drakbackup_.c:1558
 msgid "Select the files or directories and click on 'Add'"
 msgstr "选择文件或目录, 然后点击 '增加'"
 
-#: ../../standalone/drakbackup_.c:1598
+#: ../../standalone/drakbackup_.c:1602
 msgid ""
 "\n"
 "Please check all options that you need.\n"
@@ -10312,66 +10433,66 @@ msgstr ""
 "\n"
 "请选中您需要的所有选项.\n"
 
-#: ../../standalone/drakbackup_.c:1599
+#: ../../standalone/drakbackup_.c:1603
 msgid ""
 "These options can backup and restore all files in your /etc directory.\n"
 msgstr "这些选项将备份和恢复您的 /etc 目录中的全部文件\n"
 
-#: ../../standalone/drakbackup_.c:1600
+#: ../../standalone/drakbackup_.c:1604
 msgid "Backup your System files. (/etc directory)"
 msgstr "备份系统文件. (/etc 目录)"
 
-#: ../../standalone/drakbackup_.c:1601
+#: ../../standalone/drakbackup_.c:1605
 msgid "Use incremental backup  (do not replace old backups)"
 msgstr "使用增量备份 (不破坏老备份)"
 
-#: ../../standalone/drakbackup_.c:1602
+#: ../../standalone/drakbackup_.c:1606
 msgid "Do not include critical files (passwd, group, fstab)"
 msgstr "不包括关键文件 (passwd, group, fstab) "
 
-#: ../../standalone/drakbackup_.c:1603
+#: ../../standalone/drakbackup_.c:1607
 msgid ""
 "With this option you will be able to restore any version\n"
 " of your /etc directory."
 msgstr "整个选项让您把/etc 目录可以恢复到任何以前的版本."
 
-#: ../../standalone/drakbackup_.c:1620
+#: ../../standalone/drakbackup_.c:1624
 msgid "Please check all users that you want to include in your backup."
 msgstr "请选择您希望备份的用户"
 
-#: ../../standalone/drakbackup_.c:1647
+#: ../../standalone/drakbackup_.c:1651
 msgid "Do not include the browser cache"
 msgstr "不包括浏览器缓存"
 
-#: ../../standalone/drakbackup_.c:1648 ../../standalone/drakbackup_.c:1672
+#: ../../standalone/drakbackup_.c:1652 ../../standalone/drakbackup_.c:1676
 msgid "Use Incremental Backups  (do not replace old backups)"
 msgstr "使用增量备份 (不破坏老备份)"
 
-#: ../../standalone/drakbackup_.c:1670 ../../standalone/drakfont_.c:1058
+#: ../../standalone/drakbackup_.c:1674 ../../standalone/drakfont_.c:1058
 msgid "Remove Selected"
 msgstr "删除所有选中的"
 
-#: ../../standalone/drakbackup_.c:1708
+#: ../../standalone/drakbackup_.c:1712
 msgid "Windows (FAT32)"
 msgstr "Windows(FAT32)"
 
-#: ../../standalone/drakbackup_.c:1747
+#: ../../standalone/drakbackup_.c:1751
 msgid "Users"
 msgstr "用户"
 
-#: ../../standalone/drakbackup_.c:1773
+#: ../../standalone/drakbackup_.c:1777
 msgid "Use network connection to backup"
 msgstr "使用网络连接作备份"
 
-#: ../../standalone/drakbackup_.c:1775
+#: ../../standalone/drakbackup_.c:1779
 msgid "Net Method:"
 msgstr "网络方法:"
 
-#: ../../standalone/drakbackup_.c:1779
+#: ../../standalone/drakbackup_.c:1783
 msgid "Use Expect for SSH"
 msgstr "把 Expect 用于 SSH"
 
-#: ../../standalone/drakbackup_.c:1780
+#: ../../standalone/drakbackup_.c:1784
 msgid ""
 "Create/Transfer\n"
 "backup keys for SSH"
@@ -10379,7 +10500,7 @@ msgstr ""
 "创建/传送\n"
 " SSH 的备份密钥"
 
-#: ../../standalone/drakbackup_.c:1781
+#: ../../standalone/drakbackup_.c:1785
 msgid ""
 "  Transfer  \n"
 "Now"
@@ -10387,15 +10508,18 @@ msgstr ""
 "  现在  \n"
 "传送"
 
-#: ../../standalone/drakbackup_.c:1782
-msgid "Keys in place already"
+#: ../../standalone/drakbackup_.c:1786
+#, fuzzy
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
 msgstr "已经有密钥了"
 
-#: ../../standalone/drakbackup_.c:1786
+#: ../../standalone/drakbackup_.c:1790
 msgid "Please enter the host name or IP."
 msgstr "请输入主机名或 IP 地址."
 
-#: ../../standalone/drakbackup_.c:1791
+#: ../../standalone/drakbackup_.c:1795
 msgid ""
 "Please enter the directory (or module) to\n"
 " put the backup on this host."
@@ -10403,62 +10527,62 @@ msgstr ""
 "请输入这个主机上存放备份的\n"
 " 目录(或模块)."
 
-#: ../../standalone/drakbackup_.c:1796
+#: ../../standalone/drakbackup_.c:1800
 msgid "Please enter your login"
 msgstr "请输入您的登录名"
 
-#: ../../standalone/drakbackup_.c:1801
+#: ../../standalone/drakbackup_.c:1805
 msgid "Please enter your password"
 msgstr "请输入您的口令"
 
-#: ../../standalone/drakbackup_.c:1807
+#: ../../standalone/drakbackup_.c:1811
 msgid "Remember this password"
 msgstr "记住口令"
 
-#: ../../standalone/drakbackup_.c:1818
+#: ../../standalone/drakbackup_.c:1822
 msgid "Need hostname, username and password!"
 msgstr "需要 主机名, 用户名, 和口令!"
 
-#: ../../standalone/drakbackup_.c:1913
+#: ../../standalone/drakbackup_.c:1917
 msgid "Use CD/DVDROM to backup"
 msgstr "使用 CD/DVDROM 备份"
 
-#: ../../standalone/drakbackup_.c:1916
+#: ../../standalone/drakbackup_.c:1920
 msgid ""
 "Please choose your CD/DVD device\n"
 "(Press Enter to propogate settings to other fields.\n"
 "This field isn't necessary, only a tool to fill in the form.)"
 msgstr "请选择您的 CD/DVD 设备"
 
-#: ../../standalone/drakbackup_.c:1921
-msgid "Please choose your CD/DVD media size"
+#: ../../standalone/drakbackup_.c:1925
+msgid "Please choose your CD/DVD media size (Mb)"
 msgstr "请选择您使用的 CD/DVD 介质容量."
 
-#: ../../standalone/drakbackup_.c:1927
+#: ../../standalone/drakbackup_.c:1931
 msgid "Please check for multisession CD"
 msgstr "如果您使用多段 CD, 请选中这里"
 
-#: ../../standalone/drakbackup_.c:1933
+#: ../../standalone/drakbackup_.c:1937
 msgid "Please check if you are using CDRW media"
 msgstr "如果您使用 CDRW 介质, 请选中这里"
 
-#: ../../standalone/drakbackup_.c:1939
+#: ../../standalone/drakbackup_.c:1943
 msgid "Please check if you want to erase your RW media (1st Session)"
 msgstr "如果您要清除您的 RW 介质(第一节), 请选中这里"
 
-#: ../../standalone/drakbackup_.c:1940
+#: ../../standalone/drakbackup_.c:1944
 msgid " Erase Now "
 msgstr " 现在清除 "
 
-#: ../../standalone/drakbackup_.c:1946
+#: ../../standalone/drakbackup_.c:1950
 msgid "Please check if you are using a DVDR device"
 msgstr "如果您使用 DVDR 设备, 请选中这里"
 
-#: ../../standalone/drakbackup_.c:1952
+#: ../../standalone/drakbackup_.c:1956
 msgid "Please check if you are using a DVDRAM device"
 msgstr "如果您使用 DVDRAM 设备, 请选中这里"
 
-#: ../../standalone/drakbackup_.c:1965
+#: ../../standalone/drakbackup_.c:1969
 msgid ""
 "Please enter your CD Writer device name\n"
 " ex: 0,1,0"
@@ -10466,92 +10590,92 @@ msgstr ""
 "请输入您的刻盘机设备名\n"
 " 如: 0,1,0"
 
-#: ../../standalone/drakbackup_.c:1998
+#: ../../standalone/drakbackup_.c:2002
 msgid "No CD device defined!"
 msgstr "没有发现 CD 设备!"
 
-#: ../../standalone/drakbackup_.c:2046
+#: ../../standalone/drakbackup_.c:2050
 msgid "Use tape to backup"
 msgstr "使用磁带备份"
 
-#: ../../standalone/drakbackup_.c:2049
+#: ../../standalone/drakbackup_.c:2053
 msgid "Please enter the device name to use for backup"
 msgstr "请输入用于备份的设备名"
 
-#: ../../standalone/drakbackup_.c:2055
+#: ../../standalone/drakbackup_.c:2059
 msgid "Please check if you want to use the non-rewinding device."
 msgstr "如果您使用不回卷的设备, 请选择这里."
 
-#: ../../standalone/drakbackup_.c:2061
+#: ../../standalone/drakbackup_.c:2065
 msgid "Please check if you want to erase your tape before the backup."
 msgstr "如果需要在备份前清除磁带, 请选择这里."
 
-#: ../../standalone/drakbackup_.c:2067
+#: ../../standalone/drakbackup_.c:2071
 msgid "Please check if you want to eject your tape after the backup."
 msgstr "如果需要在备份后, , 请选择这里."
 
-#: ../../standalone/drakbackup_.c:2073 ../../standalone/drakbackup_.c:2147
-#: ../../standalone/drakbackup_.c:3114
+#: ../../standalone/drakbackup_.c:2077 ../../standalone/drakbackup_.c:2151
+#: ../../standalone/drakbackup_.c:3118
 msgid ""
 "Please enter the maximum size\n"
 " allowed for Drakbackup"
 msgstr "请输入允许 Drakbackup 使用的最大空间"
 
-#: ../../standalone/drakbackup_.c:2138
+#: ../../standalone/drakbackup_.c:2142
 msgid "Please enter the directory to save to:"
 msgstr "请输入要保存文件的目录名:"
 
-#: ../../standalone/drakbackup_.c:2153 ../../standalone/drakbackup_.c:3120
+#: ../../standalone/drakbackup_.c:2157 ../../standalone/drakbackup_.c:3124
 msgid "Use quota for backup files."
 msgstr "使用限额备份文件."
 
-#: ../../standalone/drakbackup_.c:2219
+#: ../../standalone/drakbackup_.c:2223
 msgid "Network"
 msgstr "网络"
 
-#: ../../standalone/drakbackup_.c:2224
+#: ../../standalone/drakbackup_.c:2228
 msgid "CDROM / DVDROM"
 msgstr "CDROM / DVDROM"
 
-#: ../../standalone/drakbackup_.c:2229
+#: ../../standalone/drakbackup_.c:2233
 msgid "HardDrive / NFS"
 msgstr "硬盘 / NFS"
 
-#: ../../standalone/drakbackup_.c:2234
+#: ../../standalone/drakbackup_.c:2238
 msgid "Tape"
 msgstr "磁带"
 
-#: ../../standalone/drakbackup_.c:2248 ../../standalone/drakbackup_.c:2252
-#: ../../standalone/drakbackup_.c:2256
+#: ../../standalone/drakbackup_.c:2252 ../../standalone/drakbackup_.c:2256
+#: ../../standalone/drakbackup_.c:2260
 msgid "hourly"
 msgstr "每小时"
 
-#: ../../standalone/drakbackup_.c:2249 ../../standalone/drakbackup_.c:2253
-#: ../../standalone/drakbackup_.c:2256
+#: ../../standalone/drakbackup_.c:2253 ../../standalone/drakbackup_.c:2257
+#: ../../standalone/drakbackup_.c:2260
 msgid "daily"
 msgstr "每日"
 
-#: ../../standalone/drakbackup_.c:2250 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2256
+#: ../../standalone/drakbackup_.c:2254 ../../standalone/drakbackup_.c:2258
+#: ../../standalone/drakbackup_.c:2260
 msgid "weekly"
 msgstr "每周"
 
-#: ../../standalone/drakbackup_.c:2251 ../../standalone/drakbackup_.c:2255
-#: ../../standalone/drakbackup_.c:2256
+#: ../../standalone/drakbackup_.c:2255 ../../standalone/drakbackup_.c:2259
+#: ../../standalone/drakbackup_.c:2260
 msgid "monthly"
 msgstr "每月"
 
-#: ../../standalone/drakbackup_.c:2269
+#: ../../standalone/drakbackup_.c:2273
 msgid "Use daemon"
 msgstr "使用守护进程"
 
-#: ../../standalone/drakbackup_.c:2274
+#: ../../standalone/drakbackup_.c:2278
 msgid ""
 "Please choose the time \n"
 "interval between each backup"
 msgstr "请选择您希望备份时间间隔"
 
-#: ../../standalone/drakbackup_.c:2280
+#: ../../standalone/drakbackup_.c:2284
 msgid ""
 "Please choose the\n"
 "media for backup."
@@ -10559,7 +10683,7 @@ msgstr ""
 "请选择\n"
 "备份使用的介质."
 
-#: ../../standalone/drakbackup_.c:2287
+#: ../../standalone/drakbackup_.c:2291
 msgid ""
 "Please be sure that the cron daemon is included in your services. \n"
 "\n"
@@ -10569,71 +10693,71 @@ msgstr ""
 "\n"
 "请注意现在所有的 '网络' 介质都要利用硬盘."
 
-#: ../../standalone/drakbackup_.c:2324
+#: ../../standalone/drakbackup_.c:2328
 msgid "Send mail report after each backup to:"
 msgstr "在每次备份后发送邮件报告给 :"
 
-#: ../../standalone/drakbackup_.c:2330
+#: ../../standalone/drakbackup_.c:2334
 msgid "Delete Hard Drive tar files after backup to other media."
 msgstr "备份到其它介质之后删除硬盘上的 tar 文件."
 
-#: ../../standalone/drakbackup_.c:2369
+#: ../../standalone/drakbackup_.c:2373
 msgid "What"
 msgstr "内容"
 
-#: ../../standalone/drakbackup_.c:2374
+#: ../../standalone/drakbackup_.c:2378
 msgid "Where"
 msgstr "位置"
 
-#: ../../standalone/drakbackup_.c:2379
+#: ../../standalone/drakbackup_.c:2383
 msgid "When"
 msgstr "时间"
 
-#: ../../standalone/drakbackup_.c:2384
+#: ../../standalone/drakbackup_.c:2388
 msgid "More Options"
 msgstr "参数"
 
-#: ../../standalone/drakbackup_.c:2403 ../../standalone/drakbackup_.c:4528
+#: ../../standalone/drakbackup_.c:2407 ../../standalone/drakbackup_.c:4532
 msgid "Drakbackup Configuration"
 msgstr "DrakBackup 配置"
 
-#: ../../standalone/drakbackup_.c:2421
+#: ../../standalone/drakbackup_.c:2425
 msgid "Please choose where you want to backup"
 msgstr "请选择您希望在哪里做备份"
 
-#: ../../standalone/drakbackup_.c:2423
+#: ../../standalone/drakbackup_.c:2427
 msgid "on Hard Drive"
 msgstr "在硬盘上"
 
-#: ../../standalone/drakbackup_.c:2433
+#: ../../standalone/drakbackup_.c:2437
 msgid "across Network"
 msgstr "通过网络"
 
-#: ../../standalone/drakbackup_.c:2443
+#: ../../standalone/drakbackup_.c:2447
 msgid "on CDROM"
 msgstr "在CDROM上"
 
-#: ../../standalone/drakbackup_.c:2451
+#: ../../standalone/drakbackup_.c:2455
 msgid "on Tape Device"
 msgstr "在磁带机上"
 
-#: ../../standalone/drakbackup_.c:2494
+#: ../../standalone/drakbackup_.c:2498
 msgid "Please choose what you want to backup"
 msgstr "请选择您要备份的文件"
 
-#: ../../standalone/drakbackup_.c:2495
+#: ../../standalone/drakbackup_.c:2499
 msgid "Backup system"
 msgstr "备份系统"
 
-#: ../../standalone/drakbackup_.c:2496
+#: ../../standalone/drakbackup_.c:2500
 msgid "Backup Users"
 msgstr "备份用户"
 
-#: ../../standalone/drakbackup_.c:2499
+#: ../../standalone/drakbackup_.c:2503
 msgid "Select user manually"
 msgstr "手工选择用户"
 
-#: ../../standalone/drakbackup_.c:2582
+#: ../../standalone/drakbackup_.c:2586
 msgid ""
 "\n"
 "Backup Sources: \n"
@@ -10641,7 +10765,7 @@ msgstr ""
 "\n"
 "备份来源 : \n"
 
-#: ../../standalone/drakbackup_.c:2583
+#: ../../standalone/drakbackup_.c:2587
 msgid ""
 "\n"
 "- System Files:\n"
@@ -10649,7 +10773,7 @@ msgstr ""
 "\n"
 "- 系统文件:\n"
 
-#: ../../standalone/drakbackup_.c:2585
+#: ../../standalone/drakbackup_.c:2589
 msgid ""
 "\n"
 "- User Files:\n"
@@ -10657,7 +10781,7 @@ msgstr ""
 "\n"
 "- 用户文件:\n"
 
-#: ../../standalone/drakbackup_.c:2587
+#: ../../standalone/drakbackup_.c:2591
 msgid ""
 "\n"
 "- Other Files:\n"
@@ -10665,7 +10789,7 @@ msgstr ""
 "\n"
 "- 其他文件:\n"
 
-#: ../../standalone/drakbackup_.c:2589
+#: ../../standalone/drakbackup_.c:2593
 #, c-format
 msgid ""
 "\n"
@@ -10674,7 +10798,7 @@ msgstr ""
 "\n"
 "- 保存在硬盘路径: %s\n"
 
-#: ../../standalone/drakbackup_.c:2592
+#: ../../standalone/drakbackup_.c:2596
 msgid ""
 "\n"
 "- Delete hard drive tar files after backup.\n"
@@ -10682,7 +10806,7 @@ msgstr ""
 "\n"
 "- 备份后删除硬盘的 tar 文件.\n"
 
-#: ../../standalone/drakbackup_.c:2598
+#: ../../standalone/drakbackup_.c:2602
 msgid ""
 "\n"
 "- Burn to CD"
@@ -10690,20 +10814,20 @@ msgstr ""
 "\n"
 "- 烧光盘"
 
-#: ../../standalone/drakbackup_.c:2599
+#: ../../standalone/drakbackup_.c:2603
 msgid "RW"
 msgstr "RW"
 
-#: ../../standalone/drakbackup_.c:2600
+#: ../../standalone/drakbackup_.c:2604
 #, c-format
 msgid " on device: %s"
 msgstr " 使用设备: %s"
 
-#: ../../standalone/drakbackup_.c:2601
+#: ../../standalone/drakbackup_.c:2605
 msgid " (multi-session)"
 msgstr " (多道)"
 
-#: ../../standalone/drakbackup_.c:2602
+#: ../../standalone/drakbackup_.c:2606
 #, c-format
 msgid ""
 "\n"
@@ -10712,12 +10836,12 @@ msgstr ""
 "\n"
 "- 保存到磁带设备: %s"
 
-#: ../../standalone/drakbackup_.c:2603
+#: ../../standalone/drakbackup_.c:2607
 #, c-format
 msgid "\t\tErase=%s"
 msgstr "\t\tErase=%s"
 
-#: ../../standalone/drakbackup_.c:2606
+#: ../../standalone/drakbackup_.c:2610
 #, c-format
 msgid ""
 "\n"
@@ -10726,7 +10850,7 @@ msgstr ""
 "\n"
 "- 通过 %s 保存到主机: %s\n"
 
-#: ../../standalone/drakbackup_.c:2607
+#: ../../standalone/drakbackup_.c:2611
 #, c-format
 msgid ""
 "\t\t user name: %s\n"
@@ -10735,7 +10859,7 @@ msgstr ""
 "\t\t 用户名: %s\n"
 "\t\t 路径: %s \n"
 
-#: ../../standalone/drakbackup_.c:2608
+#: ../../standalone/drakbackup_.c:2612
 msgid ""
 "\n"
 "- Options:\n"
@@ -10743,19 +10867,19 @@ msgstr ""
 "\n"
 "- 选项:\n"
 
-#: ../../standalone/drakbackup_.c:2609
+#: ../../standalone/drakbackup_.c:2613
 msgid "\tDo not include System Files\n"
 msgstr "\t不包括系统文件\n"
 
-#: ../../standalone/drakbackup_.c:2612
+#: ../../standalone/drakbackup_.c:2616
 msgid "\tBackups use tar and bzip2\n"
 msgstr "\t使用 tar 和 bzip2 备份\n"
 
-#: ../../standalone/drakbackup_.c:2614
+#: ../../standalone/drakbackup_.c:2618
 msgid "\tBackups use tar and gzip\n"
 msgstr "\t使用 tar 和 gzip 备份\n"
 
-#: ../../standalone/drakbackup_.c:2617
+#: ../../standalone/drakbackup_.c:2621
 #, c-format
 msgid ""
 "\n"
@@ -10764,39 +10888,39 @@ msgstr ""
 "\n"
 "- Daemon (%s) include:\n"
 
-#: ../../standalone/drakbackup_.c:2618
+#: ../../standalone/drakbackup_.c:2622
 msgid "\t-Hard drive.\n"
 msgstr "\t-硬盘.\n"
 
-#: ../../standalone/drakbackup_.c:2619
+#: ../../standalone/drakbackup_.c:2623
 msgid "\t-CDROM.\n"
 msgstr "\t-光盘.\n"
 
-#: ../../standalone/drakbackup_.c:2620
+#: ../../standalone/drakbackup_.c:2624
 msgid "\t-Tape \n"
 msgstr "\t-磁带 \n"
 
-#: ../../standalone/drakbackup_.c:2621
+#: ../../standalone/drakbackup_.c:2625
 msgid "\t-Network by FTP.\n"
 msgstr "\t-网络通过FTP.\n"
 
-#: ../../standalone/drakbackup_.c:2622
+#: ../../standalone/drakbackup_.c:2626
 msgid "\t-Network by SSH.\n"
 msgstr "\t-网络 通过SSH\n"
 
-#: ../../standalone/drakbackup_.c:2623
+#: ../../standalone/drakbackup_.c:2627
 msgid "\t-Network by rsync.\n"
 msgstr "\t-网络 通过 rsync.\n"
 
-#: ../../standalone/drakbackup_.c:2624
+#: ../../standalone/drakbackup_.c:2628
 msgid "\t-Network by webdav.\n"
 msgstr "\t-网络 通过webdav.\n"
 
-#: ../../standalone/drakbackup_.c:2626
+#: ../../standalone/drakbackup_.c:2630
 msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr "没有配置, 请选择导师或高级.\n"
 
-#: ../../standalone/drakbackup_.c:2632
+#: ../../standalone/drakbackup_.c:2636
 msgid ""
 "List of data to restore:\n"
 "\n"
@@ -10804,7 +10928,7 @@ msgstr ""
 "要恢复数据的清单:\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:2799
+#: ../../standalone/drakbackup_.c:2803
 msgid ""
 "List of data corrupted:\n"
 "\n"
@@ -10812,100 +10936,100 @@ msgstr ""
 "已毁坏数据的清单:\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:2801
+#: ../../standalone/drakbackup_.c:2805
 msgid "Please uncheck or remove it on next time."
 msgstr "请取消选择并删除它."
 
-#: ../../standalone/drakbackup_.c:2811
+#: ../../standalone/drakbackup_.c:2815
 msgid "Backup files are corrupted"
 msgstr "备份文件损坏了"
 
-#: ../../standalone/drakbackup_.c:2832
+#: ../../standalone/drakbackup_.c:2836
 msgid "          All of your selected data have been          "
 msgstr "         您选择的全部数据已经              "
 
-#: ../../standalone/drakbackup_.c:2833
+#: ../../standalone/drakbackup_.c:2837
 #, c-format
 msgid "          Successfuly Restored on %s       "
 msgstr "\t成功的恢复到 %s       "
 
-#: ../../standalone/drakbackup_.c:2951
+#: ../../standalone/drakbackup_.c:2955
 msgid "         Restore Configuration       "
 msgstr "        恢复的配置       "
 
-#: ../../standalone/drakbackup_.c:2969
+#: ../../standalone/drakbackup_.c:2973
 msgid "OK to restore the other files."
 msgstr "OK 将恢复其他文件"
 
-#: ../../standalone/drakbackup_.c:2986
+#: ../../standalone/drakbackup_.c:2990
 msgid "User list to restore (only the most recent date per user is important)"
 msgstr "可恢复的用户清单 (每个用户最近的数据是重要的)"
 
-#: ../../standalone/drakbackup_.c:3064
+#: ../../standalone/drakbackup_.c:3068
 msgid "Backup the system files before:"
 msgstr "先备份系统文件:"
 
-#: ../../standalone/drakbackup_.c:3066
+#: ../../standalone/drakbackup_.c:3070
 msgid "please choose the date to restore"
 msgstr "请选择需要恢复的数据"
 
-#: ../../standalone/drakbackup_.c:3103
+#: ../../standalone/drakbackup_.c:3107
 msgid "Use Hard Disk to backup"
 msgstr "使用硬盘备份文件"
 
-#: ../../standalone/drakbackup_.c:3106
+#: ../../standalone/drakbackup_.c:3110
 msgid "Please enter the directory to save:"
 msgstr "请输入目录名:"
 
-#: ../../standalone/drakbackup_.c:3149
+#: ../../standalone/drakbackup_.c:3153
 msgid "FTP Connection"
 msgstr "FTP 连接"
 
-#: ../../standalone/drakbackup_.c:3156
+#: ../../standalone/drakbackup_.c:3160
 msgid "Secure Connection"
 msgstr "加密连接"
 
-#: ../../standalone/drakbackup_.c:3182
+#: ../../standalone/drakbackup_.c:3186
 msgid "Restore from Hard Disk."
 msgstr "从硬盘恢复"
 
-#: ../../standalone/drakbackup_.c:3184
+#: ../../standalone/drakbackup_.c:3188
 msgid "Please enter the directory where backups are stored"
 msgstr "请输入保存备份的目录"
 
-#: ../../standalone/drakbackup_.c:3252
+#: ../../standalone/drakbackup_.c:3256
 msgid "Select another media to restore from"
 msgstr "请选择另一载体"
 
-#: ../../standalone/drakbackup_.c:3254
+#: ../../standalone/drakbackup_.c:3258
 msgid "Other Media"
 msgstr "载体"
 
-#: ../../standalone/drakbackup_.c:3259
+#: ../../standalone/drakbackup_.c:3263
 msgid "Restore system"
 msgstr "恢复系统"
 
-#: ../../standalone/drakbackup_.c:3260
+#: ../../standalone/drakbackup_.c:3264
 msgid "Restore Users"
 msgstr "恢复用户文件"
 
-#: ../../standalone/drakbackup_.c:3261
+#: ../../standalone/drakbackup_.c:3265
 msgid "Restore Other"
 msgstr "恢复其它文件"
 
-#: ../../standalone/drakbackup_.c:3263
+#: ../../standalone/drakbackup_.c:3267
 msgid "select path to restore (instead of /)"
 msgstr "选择将要恢复到的路径 (/ 除外)"
 
-#: ../../standalone/drakbackup_.c:3267
+#: ../../standalone/drakbackup_.c:3271
 msgid "Do new backup before restore (only for incremental backups.)"
 msgstr "恢复前做新的备份 (只适用于增量备份.)"
 
-#: ../../standalone/drakbackup_.c:3269
+#: ../../standalone/drakbackup_.c:3273
 msgid "Remove user directories before restore."
 msgstr "恢复前删除用户目录."
 
-#: ../../standalone/drakbackup_.c:3382
+#: ../../standalone/drakbackup_.c:3386
 msgid ""
 "Restore Selected\n"
 "Catalog Entry"
@@ -10913,7 +11037,7 @@ msgstr ""
 "恢复选中的\n"
 "目录项"
 
-#: ../../standalone/drakbackup_.c:3392
+#: ../../standalone/drakbackup_.c:3396
 msgid ""
 "Restore Selected\n"
 "Files"
@@ -10921,7 +11045,7 @@ msgstr ""
 "恢复选中的\n"
 "文件"
 
-#: ../../standalone/drakbackup_.c:3409
+#: ../../standalone/drakbackup_.c:3413
 msgid ""
 "Change\n"
 "Restore Path"
@@ -10929,12 +11053,12 @@ msgstr ""
 "修改\n"
 "恢复路径"
 
-#: ../../standalone/drakbackup_.c:3475
+#: ../../standalone/drakbackup_.c:3479
 #, c-format
 msgid "Backup files not found at %s."
 msgstr "在 %s 没有发现备份文件."
 
-#: ../../standalone/drakbackup_.c:3488
+#: ../../standalone/drakbackup_.c:3492
 #, c-format
 msgid ""
 "Insert the CD with volume label %s\n"
@@ -10943,16 +11067,16 @@ msgstr ""
 "请把卷标为 %s 的光盘插入\n"
 "到加载于 /mnt/cdrom 的光盘驱动器"
 
-#: ../../standalone/drakbackup_.c:3488
+#: ../../standalone/drakbackup_.c:3492
 msgid "Restore From CD"
 msgstr "从光盘恢复"
 
-#: ../../standalone/drakbackup_.c:3490
+#: ../../standalone/drakbackup_.c:3494
 #, c-format
 msgid "Not the correct CD label. Disk is labelled %s."
 msgstr "光盘盘标不对. 这张盘的卷标是 %s."
 
-#: ../../standalone/drakbackup_.c:3500
+#: ../../standalone/drakbackup_.c:3504
 #, c-format
 msgid ""
 "Insert the tape with volume label %s\n"
@@ -10961,102 +11085,102 @@ msgstr ""
 "请把卷标为 %s 的磁带装进\n"
 "磁带机 %s"
 
-#: ../../standalone/drakbackup_.c:3500
+#: ../../standalone/drakbackup_.c:3504
 msgid "Restore From Tape"
 msgstr "从磁带恢复"
 
-#: ../../standalone/drakbackup_.c:3502
+#: ../../standalone/drakbackup_.c:3506
 #, c-format
 msgid "Not the correct tape label. Tape is labelled %s."
 msgstr "磁带标记不对. 这盘磁带是 %s"
 
-#: ../../standalone/drakbackup_.c:3522
+#: ../../standalone/drakbackup_.c:3526
 msgid "Restore Via Network"
 msgstr "通过网络恢复"
 
-#: ../../standalone/drakbackup_.c:3522
+#: ../../standalone/drakbackup_.c:3526
 #, c-format
 msgid "Restore Via Network Protocol: %s"
 msgstr "恢复使用的网络协议: %s"
 
-#: ../../standalone/drakbackup_.c:3523
+#: ../../standalone/drakbackup_.c:3527
 msgid "Host Name"
 msgstr "主机名"
 
-#: ../../standalone/drakbackup_.c:3524
+#: ../../standalone/drakbackup_.c:3528
 msgid "Host Path or Module"
 msgstr "主机路径和模块"
 
-#: ../../standalone/drakbackup_.c:3531
+#: ../../standalone/drakbackup_.c:3535
 msgid "Password required"
 msgstr "需要口令"
 
-#: ../../standalone/drakbackup_.c:3537
+#: ../../standalone/drakbackup_.c:3541
 msgid "Username required"
 msgstr "需要用户名"
 
-#: ../../standalone/drakbackup_.c:3540
+#: ../../standalone/drakbackup_.c:3544
 msgid "Hostname required"
 msgstr "需要主机名字"
 
-#: ../../standalone/drakbackup_.c:3545
+#: ../../standalone/drakbackup_.c:3549
 msgid "Path or Module required"
 msgstr "要求提供路径或模块"
 
-#: ../../standalone/drakbackup_.c:3558
+#: ../../standalone/drakbackup_.c:3562
 msgid "Files Restored..."
 msgstr "文件已恢复..."
 
-#: ../../standalone/drakbackup_.c:3561
+#: ../../standalone/drakbackup_.c:3565
 msgid "Restore Failed..."
 msgstr "恢复失败..."
 
-#: ../../standalone/drakbackup_.c:3799
+#: ../../standalone/drakbackup_.c:3803
 msgid "Restore all backups"
 msgstr "恢复所有备份"
 
-#: ../../standalone/drakbackup_.c:3808
+#: ../../standalone/drakbackup_.c:3812
 msgid "Custom Restore"
 msgstr "定制恢复"
 
-#: ../../standalone/drakbackup_.c:3854
+#: ../../standalone/drakbackup_.c:3858
 msgid "CD in place - continue."
 msgstr "光盘就绪 - 继续."
 
-#: ../../standalone/drakbackup_.c:3860
+#: ../../standalone/drakbackup_.c:3864
 msgid "Browse to new restore repository."
 msgstr "浏览新的恢复仓库."
 
-#: ../../standalone/drakbackup_.c:3863
+#: ../../standalone/drakbackup_.c:3867
 msgid "Restore From Catalog"
 msgstr "从目录恢复"
 
-#: ../../standalone/drakbackup_.c:3891
+#: ../../standalone/drakbackup_.c:3895
 msgid "Restore Progress"
 msgstr "恢复进展"
 
-#: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3966
-#: ../../standalone/drakbackup_.c:3992 ../../standalone/drakbackup_.c:4019
-#: ../../standalone/drakbackup_.c:4046 ../../standalone/drakbackup_.c:4106
-#: ../../standalone/drakbackup_.c:4133 ../../standalone/drakbackup_.c:4163
-#: ../../standalone/drakbackup_.c:4189
+#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3970
+#: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4023
+#: ../../standalone/drakbackup_.c:4050 ../../standalone/drakbackup_.c:4110
+#: ../../standalone/drakbackup_.c:4137 ../../standalone/drakbackup_.c:4167
+#: ../../standalone/drakbackup_.c:4193
 msgid "Previous"
 msgstr "前一步"
 
-#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:4023
+#: ../../standalone/drakbackup_.c:3941 ../../standalone/drakbackup_.c:4027
 #: ../../standalone/logdrake_.c:223
 msgid "Save"
 msgstr "保存"
 
-#: ../../standalone/drakbackup_.c:3996
+#: ../../standalone/drakbackup_.c:4000
 msgid "Build Backup"
 msgstr "正在备份"
 
-#: ../../standalone/drakbackup_.c:4050 ../../standalone/drakbackup_.c:4630
+#: ../../standalone/drakbackup_.c:4054 ../../standalone/drakbackup_.c:4634
 msgid "Restore"
 msgstr "恢复"
 
-#: ../../standalone/drakbackup_.c:4229
+#: ../../standalone/drakbackup_.c:4233
 msgid ""
 "Error during sendmail.\n"
 "  Your report mail was not sent.\n"
@@ -11066,7 +11190,7 @@ msgstr ""
 "  您的报告邮件没有发出.\n"
 "  请配置 sendmail"
 
-#: ../../standalone/drakbackup_.c:4253
+#: ../../standalone/drakbackup_.c:4257
 msgid ""
 "The following packages need to be installed:\n"
 " @list_of_rpm_to_install"
@@ -11074,7 +11198,7 @@ msgstr ""
 "下列软件包将要被安装:\n"
 " @list_of_rpm_to_install"
 
-#: ../../standalone/drakbackup_.c:4276
+#: ../../standalone/drakbackup_.c:4280
 msgid ""
 "Error during sending file via FTP.\n"
 " Please correct your FTP configuration."
@@ -11082,19 +11206,19 @@ msgstr ""
 "通过 FTP 发送文件出错.\n"
 " 请改正您的 FTP 配置."
 
-#: ../../standalone/drakbackup_.c:4299
+#: ../../standalone/drakbackup_.c:4303
 msgid "Please select data to restore..."
 msgstr "请选择要恢复的数据..."
 
-#: ../../standalone/drakbackup_.c:4320
+#: ../../standalone/drakbackup_.c:4324
 msgid "Please select media for backup..."
 msgstr "请选择使用的载体..."
 
-#: ../../standalone/drakbackup_.c:4342
+#: ../../standalone/drakbackup_.c:4346
 msgid "Please select data to backup..."
 msgstr "请选择需备份的数据..."
 
-#: ../../standalone/drakbackup_.c:4364
+#: ../../standalone/drakbackup_.c:4368
 msgid ""
 "No configuration file found \n"
 "please click Wizard or Advanced."
@@ -11102,59 +11226,59 @@ msgstr ""
 "没有找到配置文件\n"
 "请点击向导或高级."
 
-#: ../../standalone/drakbackup_.c:4385
+#: ../../standalone/drakbackup_.c:4389
 msgid "Under Devel ... please wait."
 msgstr "开发中...请等待新版本."
 
-#: ../../standalone/drakbackup_.c:4466
+#: ../../standalone/drakbackup_.c:4470
 msgid "Backup system files"
 msgstr "备份系统文件"
 
-#: ../../standalone/drakbackup_.c:4468
+#: ../../standalone/drakbackup_.c:4472
 msgid "Backup user files"
 msgstr "备份用户文件"
 
-#: ../../standalone/drakbackup_.c:4470
+#: ../../standalone/drakbackup_.c:4474
 msgid "Backup other files"
 msgstr "备份其他文件"
 
-#: ../../standalone/drakbackup_.c:4472 ../../standalone/drakbackup_.c:4505
+#: ../../standalone/drakbackup_.c:4476 ../../standalone/drakbackup_.c:4509
 msgid "Total Progress"
 msgstr "总进展"
 
-#: ../../standalone/drakbackup_.c:4496
+#: ../../standalone/drakbackup_.c:4500
 msgid "files sending by FTP"
 msgstr "正在通过 FTP 发送文件"
 
-#: ../../standalone/drakbackup_.c:4500
+#: ../../standalone/drakbackup_.c:4504
 msgid "Sending files..."
 msgstr "正在发送文件..."
 
-#: ../../standalone/drakbackup_.c:4586
+#: ../../standalone/drakbackup_.c:4590
 msgid "Backup Now from configuration file"
 msgstr "现在备份,从配置文件"
 
-#: ../../standalone/drakbackup_.c:4591
+#: ../../standalone/drakbackup_.c:4595
 msgid "View Backup Configuration."
 msgstr "查看备份配置"
 
-#: ../../standalone/drakbackup_.c:4612
+#: ../../standalone/drakbackup_.c:4616
 msgid "Wizard Configuration"
 msgstr "向导配置"
 
-#: ../../standalone/drakbackup_.c:4617
+#: ../../standalone/drakbackup_.c:4621
 msgid "Advanced Configuration"
 msgstr "高级配置"
 
-#: ../../standalone/drakbackup_.c:4622
+#: ../../standalone/drakbackup_.c:4626
 msgid "Backup Now"
 msgstr "现在备份"
 
-#: ../../standalone/drakbackup_.c:4656
+#: ../../standalone/drakbackup_.c:4660
 msgid "Drakbackup"
 msgstr "魔力备份"
 
-#: ../../standalone/drakbackup_.c:4705
+#: ../../standalone/drakbackup_.c:4711
 msgid ""
 "options description:\n"
 "\n"
@@ -11214,7 +11338,7 @@ msgstr ""
 "      \n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:4735
+#: ../../standalone/drakbackup_.c:4741
 msgid ""
 "\n"
 " Some errors during sendmail are caused by \n"
@@ -11227,7 +11351,7 @@ msgstr ""
 " 您需要在 /etc/postfix/main.cf 中设置 myhostname 或 mydomain\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:4743
+#: ../../standalone/drakbackup_.c:4749
 msgid ""
 "options description:\n"
 "\n"
@@ -11301,7 +11425,7 @@ msgstr ""
 "\t如果不选择增量备份\n"
 "\t每次备份之前会删除旧的备份.\n"
 
-#: ../../standalone/drakbackup_.c:4782
+#: ../../standalone/drakbackup_.c:4788
 msgid ""
 "restore description:\n"
 " \n"
@@ -11353,19 +11477,19 @@ msgstr ""
 "\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:4808 ../../standalone/drakbackup_.c:4885
+#: ../../standalone/drakbackup_.c:4814 ../../standalone/drakbackup_.c:4891
 msgid ""
 " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
 msgstr ""
 " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
 
-#: ../../standalone/drakbackup_.c:4810 ../../standalone/drakbackup_.c:4887
+#: ../../standalone/drakbackup_.c:4816 ../../standalone/drakbackup_.c:4893
 msgid ""
 " updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
 " updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 
-#: ../../standalone/drakbackup_.c:4812 ../../standalone/drakbackup_.c:4889
+#: ../../standalone/drakbackup_.c:4818 ../../standalone/drakbackup_.c:4895
 msgid ""
 " This program is free software; you can redistribute it and/or modify\n"
 " it under the terms of the GNU General Public License as published by\n"
@@ -11396,7 +11520,7 @@ msgstr ""
 " 地址是 Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, "
 "MA 02111-1307, USA."
 
-#: ../../standalone/drakbackup_.c:4826
+#: ../../standalone/drakbackup_.c:4832
 msgid ""
 "Description:\n"
 "\n"
@@ -11471,7 +11595,7 @@ msgstr ""
 " \n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:4864
+#: ../../standalone/drakbackup_.c:4870
 msgid ""
 "options description:\n"
 "\n"
@@ -11489,7 +11613,7 @@ msgstr ""
 "然后把它传到服务器.\n"
 "\n"
 
-#: ../../standalone/drakbackup_.c:4873
+#: ../../standalone/drakbackup_.c:4879
 msgid ""
 "\n"
 "Restore Backup Problems:\n"
@@ -11510,7 +11634,7 @@ msgstr ""
 "一定不要手工修改备份数据文件.\n"
 ".\n"
 
-#: ../../standalone/drakbackup_.c:4903
+#: ../../standalone/drakbackup_.c:4909
 msgid ""
 "Description:\n"
 "\n"
@@ -11634,8 +11758,8 @@ msgid "Synchronization tool"
 msgstr "同步工具"
 
 #: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:86
-#: ../../standalone/drakbug_.c:151 ../../standalone/drakbug_.c:153
-#: ../../standalone/drakbug_.c:157
+#: ../../standalone/drakbug_.c:156 ../../standalone/drakbug_.c:158
+#: ../../standalone/drakbug_.c:162
 msgid "Standalone Tools"
 msgstr "独立工具"
 
@@ -11700,7 +11824,7 @@ msgid ""
 "\n"
 "\n"
 "To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://www.bugzilla.com\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
 " where you'll find a form to fill in.The information displayed above will "
 "be \n"
 "transferred to that server\n"
@@ -11709,24 +11833,24 @@ msgstr ""
 "\n"
 "\n"
 "要提交故障报告, 点击报告按钮.\n"
-"它会打开一个浏览器窗口, 进入 https://www.bugzilla.com\n"
+"它会打开一个浏览器窗口, 进入 https://drakbug.mandrakesoft.com\n"
 " 那里有一个表格需要您填写. 上面显示的信息将被 \n"
 "传送到服务器.\n"
 "\n"
 
-#: ../../standalone/drakbug_.c:136
+#: ../../standalone/drakbug_.c:134
 msgid "Report"
 msgstr "报告"
 
-#: ../../standalone/drakbug_.c:166
+#: ../../standalone/drakbug_.c:171
 msgid "Not installed"
 msgstr "没有安装"
 
-#: ../../standalone/drakbug_.c:183
+#: ../../standalone/drakbug_.c:189
 msgid "connecting to Bugzilla wizard ..."
 msgstr "连接 Bugzilla 故障报告精灵 ..."
 
-#: ../../standalone/drakbug_.c:190
+#: ../../standalone/drakbug_.c:196
 msgid "No browser available! Please install one"
 msgstr "没有可用的浏览器! 请安装一个"
 
@@ -11825,10 +11949,6 @@ msgstr "向导..."
 msgid "Apply"
 msgstr "应用"
 
-#: ../../standalone/drakconnect_.c:301
-msgid "Please Wait... Applying the configuration"
-msgstr "请等待...设定配置"
-
 #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406
 msgid "Connected"
 msgstr "连接"
@@ -11948,7 +12068,7 @@ msgstr "模块"
 msgid "Size"
 msgstr "大小"
 
-#: ../../standalone/drakfloppy_.c:73 ../../standalone/drakfloppy_.c:372
+#: ../../standalone/drakfloppy_.c:73
 msgid "drakfloppy"
 msgstr "魔力软盘"
 
@@ -12013,12 +12133,12 @@ msgstr "输出"
 msgid "Build the disk"
 msgstr "制作开机启动盘"
 
-#: ../../standalone/drakfloppy_.c:421
+#: ../../standalone/drakfloppy_.c:376
 #, c-format
 msgid "Be sure a media is present for the device %s"
 msgstr "确定设备 %s 的介质存在"
 
-#: ../../standalone/drakfloppy_.c:426
+#: ../../standalone/drakfloppy_.c:381
 #, c-format
 msgid ""
 "There is no medium or it is write-protected for device %s.\n"
@@ -12027,12 +12147,12 @@ msgstr ""
 "设备 %s 介质不存在或被写保护.\n"
 "请插入介质."
 
-#: ../../standalone/drakfloppy_.c:428
+#: ../../standalone/drakfloppy_.c:383
 #, c-format
 msgid "Unable to fork: %s"
 msgstr "无法创建进程: %s"
 
-#: ../../standalone/drakfloppy_.c:432
+#: ../../standalone/drakfloppy_.c:387
 #, c-format
 msgid ""
 "Unable to close properly mkbootdisk: \n"
@@ -12505,47 +12625,47 @@ msgstr ""
 "\n"
 "点击''配置''运行配置精灵."
 
-#: ../../standalone/drakperm_.c:41
+#: ../../standalone/drakperm_.c:42
 msgid "group"
 msgstr "组"
 
-#: ../../standalone/drakperm_.c:41
+#: ../../standalone/drakperm_.c:42
 msgid "path"
 msgstr "路径"
 
-#: ../../standalone/drakperm_.c:41
+#: ../../standalone/drakperm_.c:42
 msgid "permissions"
 msgstr "权限"
 
-#: ../../standalone/drakperm_.c:41
+#: ../../standalone/drakperm_.c:42
 msgid "user"
 msgstr "用户"
 
-#: ../../standalone/drakperm_.c:48
+#: ../../standalone/drakperm_.c:49
 msgid "Up"
 msgstr "提高"
 
-#: ../../standalone/drakperm_.c:49
+#: ../../standalone/drakperm_.c:50
 msgid "delete"
 msgstr "删除"
 
-#: ../../standalone/drakperm_.c:50
+#: ../../standalone/drakperm_.c:51
 msgid "edit"
 msgstr "编辑"
 
-#: ../../standalone/drakperm_.c:51
+#: ../../standalone/drakperm_.c:52
 msgid "Down"
 msgstr "降低"
 
-#: ../../standalone/drakperm_.c:52
+#: ../../standalone/drakperm_.c:53
 msgid "add a rule"
 msgstr "增加规则"
 
-#: ../../standalone/drakperm_.c:53
+#: ../../standalone/drakperm_.c:54
 msgid "select perm file to see/edit"
 msgstr "挑选要查看/修改的权限定义文件"
 
-#: ../../standalone/drakperm_.c:56
+#: ../../standalone/drakperm_.c:57
 msgid ""
 "Drakperm is used to see files to use in order to fix permissions, owners, "
 "and groups via msec.\n"
@@ -12555,59 +12675,59 @@ msgstr ""
 "组等.\n"
 "您可以编写自己的规则以代替各种缺省的规则."
 
-#: ../../standalone/drakperm_.c:61
+#: ../../standalone/drakperm_.c:62
 msgid "Add a new rule at the end"
 msgstr "在末尾添加新的规则"
 
-#: ../../standalone/drakperm_.c:62
+#: ../../standalone/drakperm_.c:63
 msgid "Edit curent rule"
 msgstr "编辑当前的规则"
 
-#: ../../standalone/drakperm_.c:63
+#: ../../standalone/drakperm_.c:64
 msgid "Up selected rule one level"
 msgstr "把选中的规则提高一级"
 
-#: ../../standalone/drakperm_.c:64
+#: ../../standalone/drakperm_.c:65
 msgid "Down selected rule one level"
 msgstr "把选中的规则降低一级"
 
-#: ../../standalone/drakperm_.c:65
+#: ../../standalone/drakperm_.c:66
 msgid "Delete selected rule"
 msgstr "删除选中的规则"
 
-#: ../../standalone/drakperm_.c:241 ../../standalone/draksplash_.c:85
+#: ../../standalone/drakperm_.c:237
 msgid "browse"
 msgstr "浏览"
 
-#: ../../standalone/drakperm_.c:248
+#: ../../standalone/drakperm_.c:244
 msgid "Current user"
 msgstr "当前用户"
 
-#: ../../standalone/drakperm_.c:253
+#: ../../standalone/drakperm_.c:249
 msgid "Permissions"
 msgstr "权限"
 
-#: ../../standalone/drakperm_.c:254
+#: ../../standalone/drakperm_.c:250
 msgid "Path"
 msgstr "路径"
 
-#: ../../standalone/drakperm_.c:255
+#: ../../standalone/drakperm_.c:251
 msgid "Property"
 msgstr "所有权"
 
-#: ../../standalone/drakperm_.c:257
+#: ../../standalone/drakperm_.c:253
 msgid "sticky-bit"
 msgstr "sticky-bit"
 
-#: ../../standalone/drakperm_.c:258
+#: ../../standalone/drakperm_.c:254
 msgid "Set-UID"
 msgstr "Set-UID"
 
-#: ../../standalone/drakperm_.c:259
+#: ../../standalone/drakperm_.c:255
 msgid "Set-GID"
 msgstr "Set-GID"
 
-#: ../../standalone/drakperm_.c:314
+#: ../../standalone/drakperm_.c:310
 msgid ""
 "Used for directory:\n"
 " only owner of directory or file in this directory can delete it"
@@ -12615,35 +12735,35 @@ msgstr ""
 "用于目录:\n"
 " 只有目录的所有者或目录中文件的所有者可以删除它"
 
-#: ../../standalone/drakperm_.c:315
+#: ../../standalone/drakperm_.c:311
 msgid "Use owner id for execution"
 msgstr "使用所有者 ID 执行"
 
-#: ../../standalone/drakperm_.c:316
+#: ../../standalone/drakperm_.c:312
 msgid "Use group id for execution"
 msgstr "使用组 ID 执行"
 
-#: ../../standalone/drakperm_.c:317
+#: ../../standalone/drakperm_.c:313
 msgid "when checked, owner and group won't be changed"
 msgstr "选中则不能改变所有者和组"
 
-#: ../../standalone/drakperm_.c:322
+#: ../../standalone/drakperm_.c:318
 msgid "Path selection"
 msgstr "选择路径"
 
-#: ../../standalone/drakperm_.c:368
+#: ../../standalone/drakperm_.c:364
 msgid "user :"
 msgstr "用户 :"
 
-#: ../../standalone/drakperm_.c:370
+#: ../../standalone/drakperm_.c:366
 msgid "group :"
 msgstr "组 :"
 
-#: ../../standalone/draksound_.c:46
+#: ../../standalone/draksound_.c:47
 msgid "No Sound Card detected!"
 msgstr "没有发现声卡!"
 
-#: ../../standalone/draksound_.c:47
+#: ../../standalone/draksound_.c:48
 msgid ""
 "No Sound Card has been detected on your machine. Please verify that a Linux-"
 "supported Sound Card is correctly plugged in.\n"
@@ -12663,123 +12783,137 @@ msgstr ""
 "\n"
 "http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/draksplash_.c:32
-msgid "package ImageMagick is required for correct working"
+#: ../../standalone/draksound_.c:55
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
+
+#: ../../standalone/draksplash_.c:34
+#, fuzzy
+msgid ""
+"package 'ImageMagick' is required for correct working.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr "要正常工作需要软件包 ImageMagick"
 
-#: ../../standalone/draksplash_.c:76
+#: ../../standalone/draksplash_.c:78
 msgid "first step creation"
 msgstr "第一步创建"
 
-#: ../../standalone/draksplash_.c:77
+#: ../../standalone/draksplash_.c:79
 msgid "final resolution"
 msgstr "最终分辨率"
 
-#: ../../standalone/draksplash_.c:78 ../../standalone/draksplash_.c:170
+#: ../../standalone/draksplash_.c:80 ../../standalone/draksplash_.c:172
 msgid "choose image file"
 msgstr "选择图像文件"
 
-#: ../../standalone/draksplash_.c:79
+#: ../../standalone/draksplash_.c:81
 msgid "Theme name"
 msgstr "主题名称"
 
-#: ../../standalone/draksplash_.c:81
-msgid "make bootsplash step 2"
-msgstr "创建开机屏幕第二步"
-
-#: ../../standalone/draksplash_.c:82
-msgid "go to lilosplash configuration"
-msgstr "继续 lilosplash 的配置"
-
-#: ../../standalone/draksplash_.c:83
-msgid "quit"
-msgstr "退出"
-
-#: ../../standalone/draksplash_.c:84
-msgid "save theme"
-msgstr "保存主题"
+#: ../../standalone/draksplash_.c:85
+msgid "Browse"
+msgstr "浏览"
 
-#: ../../standalone/draksplash_.c:98 ../../standalone/draksplash_.c:159
+#: ../../standalone/draksplash_.c:99 ../../standalone/draksplash_.c:162
 msgid "Configure bootsplash picture"
 msgstr "配置开机画面图片"
 
-#: ../../standalone/draksplash_.c:99
-msgid "x coordinate of text box in number of character"
+#: ../../standalone/draksplash_.c:100
+msgid ""
+"x coordinate of text box\n"
+"in number of character"
 msgstr "文本栏的 X 坐标, 按字符数计算"
 
-#: ../../standalone/draksplash_.c:100
-msgid "y coordinate of text box in number of character"
+#: ../../standalone/draksplash_.c:101
+msgid ""
+"y coordinate of text box\n"
+"in number of character"
 msgstr "文本栏的 Y 坐标, 按字符数计算"
 
-#: ../../standalone/draksplash_.c:101
+#: ../../standalone/draksplash_.c:102
 msgid "text width"
 msgstr "文本宽度"
 
-#: ../../standalone/draksplash_.c:102
+#: ../../standalone/draksplash_.c:103
 msgid "text box height"
 msgstr "文本栏高度"
 
-#: ../../standalone/draksplash_.c:103
-msgid "the progress bar x coordinate of its upper left corner"
+#: ../../standalone/draksplash_.c:104
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
 msgstr "进展条的左上角的 X 坐标"
 
-#: ../../standalone/draksplash_.c:104
-msgid "the progress bar y coordinate of its upper left corner"
+#: ../../standalone/draksplash_.c:105
+msgid ""
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr "进展条的左上角的 Y 坐标"
 
-#: ../../standalone/draksplash_.c:105
+#: ../../standalone/draksplash_.c:106
 msgid "the width of the progress bar"
 msgstr "进展条的宽度"
 
-#: ../../standalone/draksplash_.c:106
+#: ../../standalone/draksplash_.c:107
 msgid "the heigth of the progress bar"
 msgstr "进展条的高度"
 
-#: ../../standalone/draksplash_.c:107
+#: ../../standalone/draksplash_.c:108
 msgid "the color of the progress bar"
 msgstr "进展条的颜色"
 
-#: ../../standalone/draksplash_.c:119
-msgid "go back"
-msgstr "后退"
-
-#: ../../standalone/draksplash_.c:120
-msgid "preview"
+#: ../../standalone/draksplash_.c:121
+msgid "Preview"
 msgstr "预览"
 
-#: ../../standalone/draksplash_.c:121
-msgid "choose color"
-msgstr "选择颜色"
+#: ../../standalone/draksplash_.c:123
+msgid "Save theme"
+msgstr "保存主题"
 
 #: ../../standalone/draksplash_.c:124
+msgid "Choose color"
+msgstr "选择颜色"
+
+#: ../../standalone/draksplash_.c:127
 msgid "Display logo on Console"
 msgstr "在控制台显示 LOGO"
 
-#: ../../standalone/draksplash_.c:125
+#: ../../standalone/draksplash_.c:128
 msgid "Make kernel message quiet by default"
 msgstr "缺省设定内核消息不显示"
 
-#: ../../standalone/draksplash_.c:161 ../../standalone/draksplash_.c:330
+#: ../../standalone/draksplash_.c:165 ../../standalone/draksplash_.c:329
 #, c-format
 msgid "This theme haven't yet any bootsplash in %s !"
 msgstr "这个主题的 %s 里面还没有任何开机画面!"
 
-#: ../../standalone/draksplash_.c:213
+#: ../../standalone/draksplash_.c:212
 msgid "saving Bootsplash theme..."
 msgstr "保存开机画面主题..."
 
-#: ../../standalone/draksplash_.c:436
+#: ../../standalone/draksplash_.c:435
 msgid "ProgressBar color selection"
 msgstr "进展条颜色选择"
 
-#: ../../standalone/draksplash_.c:454
+#: ../../standalone/draksplash_.c:456
 msgid "You must choose an image file first!"
 msgstr "您必须先选择一个图像文件!"
 
-#: ../../standalone/draksplash_.c:463
+#: ../../standalone/draksplash_.c:465
 msgid "Generating preview ..."
 msgstr "正在生成预览 ..."
 
+#. -PO  First %s is theme name, second %s (in parenthesis) is resolution
+#: ../../standalone/draksplash_.c:511
+#, fuzzy, c-format
+msgid "%s BootSplash (%s) preview"
+msgstr "无法创建开机画面预览"
+
 #: ../../standalone/drakxtv_.c:49
 msgid ""
 "XawTV isn't installed!\n"
@@ -12932,6 +13066,14 @@ msgstr ""
 "\n"
 "http://www.linux-mandrake.com/en/hardware.php3"
 
+#: ../../standalone/harddrake2_.c:8
+msgid ""
+"\n"
+"Usage: harddrake [-h|--help] [--test]\n"
+msgstr ""
+"\n"
+"用法: harddrake [-h|--help] [--test]\n"
+
 #: ../../standalone/keyboarddrake_.c:16
 msgid "usage: keyboarddrake [--expert] [keyboard]\n"
 msgstr "用法: keyboarddrake [--expert] [keyboard]\n"
@@ -12960,11 +13102,11 @@ msgstr ""
 msgid "Unable to start live upgrade !!!\n"
 msgstr "无法开始 live upgrade !!!\n"
 
-#: ../../standalone/localedrake_.c:32
+#: ../../standalone/localedrake_.c:33
 msgid "The change is done, but to be effective you must logout"
 msgstr "修改已经完成, 不过您必须退出登录修改才会生效"
 
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:515
+#: ../../standalone/logdrake_.c:85 ../../ugtk.pm_.c:285
 msgid "logdrake"
 msgstr "logdrake"
 
@@ -13234,16 +13376,14 @@ msgstr ""
 "您的 %s 扫描仪已经配置好.\n"
 "现在您可以从应用程序菜单的 多媒体/图象 中使用 ``XSane'' 来扫描文档. "
 
-#: ../../standalone/service_harddrake_.c:39
+#: ../../standalone/service_harddrake_.c:44
 #, c-format
 msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr "删除了一些 \"%s\" 类别的设备:\n"
 
-#: ../../standalone/service_harddrake_.c:43
-#, c-format
-msgid ""
-"\n"
-"Some devices in the %s class were added:\n"
+#: ../../standalone/service_harddrake_.c:48
+#, fuzzy
+msgid "Some devices were added:\n"
 msgstr ""
 "\n"
 "添加了一些 %s 类别的设备:\n"
@@ -13320,7 +13460,7 @@ msgstr "安装系统更新包"
 msgid "Exit install"
 msgstr "退出安装"
 
-#: ../../ugtk.pm_.c:603
+#: ../../ugtk.pm_.c:648
 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
@@ -13562,8 +13702,45 @@ msgstr "多媒体 - 烧录光盘"
 msgid "Scientific Workstation"
 msgstr "科学计算工作站"
 
-#~ msgid "Can't create Bootsplash preview"
-#~ msgstr "无法创建开机画面预览"
+#~ msgid ""
+#~ "\n"
+#~ "\n"
+#~ "To submit a bug report, click on the button report.\n"
+#~ "This will open  a web browser window  on https://www.bugzilla.com\n"
+#~ " where you'll find a form to fill in.The information displayed above will "
+#~ "be \n"
+#~ "transferred to that server\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "\n"
+#~ "要提交故障报告, 点击报告按钮.\n"
+#~ "它会打开一个浏览器窗口, 进入 https://www.bugzilla.com\n"
+#~ " 那里有一个表格需要您填写. 上面显示的信息将被 \n"
+#~ "传送到服务器.\n"
+#~ "\n"
+
+#~ msgid "Make bootsplash step 2"
+#~ msgstr "创建开机屏幕第二步"
+
+#~ msgid "Go to lilosplash configuration"
+#~ msgstr "继续 lilosplash 的配置"
+
+#~ msgid "Go back"
+#~ msgstr "后退"
+
+#~ msgid ""
+#~ "There's no known OSS/ALSA alternative driver for your sound card (%s)"
+#~ msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡 (%s) 上"
+
+#~ msgid "ECI Hi-Focus"
+#~ msgstr "ECI Hi-Focus"
+
+#~ msgid "Proxy should be ftp://..."
+#~ msgstr "代理服务器应该是象 ftp://..."
+
+#~ msgid "quit"
+#~ msgstr "退出"
 
 #~ msgid ""
 #~ "Sorry, perl-Expect is not installed/enabled. To use\n"
@@ -13696,6 +13873,3 @@ msgstr "科学计算工作站"
 #~ "For more information on MandrakeSoft's Professional Services and "
 #~ "commercial offerings, please see the following web page:"
 #~ msgstr "要更多了解 MandrakeSoft 的专业服务和合作机会, 请到下列网页:"
-
-#~ msgid "http://www.mandrakesoft.com/sales/contact"
-#~ msgstr "http://www.mandrakesoft.com/sales/contact"